| /*********************************************************** |
| Copyright 1991-1995 by Stichting Mathematisch Centrum, Amsterdam, |
| The Netherlands. |
| |
| All Rights Reserved |
| |
| Permission to use, copy, modify, and distribute this software and its |
| documentation for any purpose and without fee is hereby granted, |
| provided that the above copyright notice appear in all copies and that |
| both that copyright notice and this permission notice appear in |
| supporting documentation, and that the names of Stichting Mathematisch |
| Centrum or CWI or Corporation for National Research Initiatives or |
| CNRI not be used in advertising or publicity pertaining to |
| distribution of the software without specific, written prior |
| permission. |
| |
| While CWI is the initial source for this software, a modified version |
| is made available by the Corporation for National Research Initiatives |
| (CNRI) at the Internet address ftp://ftp.python.org. |
| |
| STICHTING MATHEMATISCH CENTRUM AND CNRI DISCLAIM ALL WARRANTIES WITH |
| REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF |
| MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL STICHTING MATHEMATISCH |
| CENTRUM OR CNRI BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL |
| DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR |
| PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| PERFORMANCE OF THIS SOFTWARE. |
| |
| ******************************************************************/ |
| |
| /* Socket module */ |
| |
| /* |
| This module provides an interface to Berkeley socket IPC. |
| |
| Limitations: |
| |
| - only AF_INET and AF_UNIX address families are supported |
| - no read/write operations (use send/recv or makefile instead) |
| - additional restrictions apply on Windows |
| |
| Module interface: |
| |
| - socket.error: exception raised for socket specific errors |
| - socket.gethostbyname(hostname) --> host IP address (string: 'dd.dd.dd.dd') |
| - socket.gethostbyaddr(IP address) --> (hostname, [alias, ...], [IP addr, ...]) |
| - socket.gethostname() --> host name (string: 'spam' or 'spam.domain.com') |
| - socket.getprotobyname(protocolname) --> protocol number |
| - socket.getservbyname(servicename, protocolname) --> port number |
| - socket.socket(family, type [, proto]) --> new socket object |
| - socket.ntohs(16 bit value) --> new int object |
| - socket.ntohl(32 bit value) --> new int object |
| - socket.htons(16 bit value) --> new int object |
| - socket.htonl(32 bit value) --> new int object |
| - socket.AF_INET, socket.SOCK_STREAM, etc.: constants from <socket.h> |
| - an Internet socket address is a pair (hostname, port) |
| where hostname can be anything recognized by gethostbyname() |
| (including the dd.dd.dd.dd notation) and port is in host byte order |
| - where a hostname is returned, the dd.dd.dd.dd notation is used |
| - a UNIX domain socket address is a string specifying the pathname |
| |
| Socket methods: |
| |
| - s.accept() --> new socket object, sockaddr |
| - s.bind(sockaddr) --> None |
| - s.close() --> None |
| - s.connect(sockaddr) --> None |
| - s.connect_ex(sockaddr) --> 0 or errno (handy for e.g. async connect) |
| - s.fileno() --> file descriptor |
| - s.dup() --> same as socket.fromfd(os.dup(s.fileno(), ...) |
| - s.getpeername() --> sockaddr |
| - s.getsockname() --> sockaddr |
| - s.getsockopt(level, optname[, buflen]) --> int or string |
| - s.listen(backlog) --> None |
| - s.makefile([mode[, bufsize]]) --> file object |
| - s.recv(buflen [,flags]) --> string |
| - s.recvfrom(buflen [,flags]) --> string, sockaddr |
| - s.send(string [,flags]) --> nbytes |
| - s.sendto(string, [flags,] sockaddr) --> nbytes |
| - s.setblocking(0 | 1) --> None |
| - s.setsockopt(level, optname, value) --> None |
| - s.shutdown(how) --> None |
| - repr(s) --> "<socket object, fd=%d, family=%d, type=%d, protocol=%d>" |
| |
| */ |
| |
| #include "Python.h" |
| #if defined(WITH_THREAD) && !defined(HAVE_GETHOSTBYNAME_R) && !defined(MS_WINDOWS) |
| #include "pythread.h" |
| #endif |
| |
| #ifdef HAVE_UNISTD_H |
| #include <unistd.h> |
| #endif |
| |
| #if !defined(MS_WINDOWS) && !defined(PYOS_OS2) && !defined(__BEOS__) |
| extern int gethostname(); /* For Solaris, at least */ |
| #endif |
| |
| #if defined(PYCC_VACPP) |
| #include <types.h> |
| #include <io.h> |
| #include <sys/ioctl.h> |
| #include <utils.h> |
| #include <ctype.h> |
| #endif |
| |
| #if defined(PYOS_OS2) |
| #define INCL_DOS |
| #define INCL_DOSERRORS |
| #define INCL_NOPMAPI |
| #include <os2.h> |
| #endif |
| |
| #if defined(__BEOS__) |
| /* It's in the libs, but not the headers... - [cjh] */ |
| int shutdown( int, int ); |
| #endif |
| |
| #include <sys/types.h> |
| #include "mytime.h" |
| |
| #include <signal.h> |
| #ifndef MS_WINDOWS |
| #include <netdb.h> |
| #include <sys/socket.h> |
| #include <netinet/in.h> |
| #include <fcntl.h> |
| #else |
| #include <winsock.h> |
| #include <fcntl.h> |
| #endif |
| #ifdef HAVE_SYS_UN_H |
| #include <sys/un.h> |
| #else |
| #undef AF_UNIX |
| #endif |
| |
| #ifndef O_NDELAY |
| #define O_NDELAY O_NONBLOCK /* For QNX only? */ |
| #endif |
| |
| #ifdef USE_GUSI |
| /* fdopen() isn't declared in stdio.h (sigh) */ |
| #include <GUSI.h> |
| #endif |
| |
| |
| /* Here we have some hacks to choose between K&R or ANSI style function |
| definitions. For NT to build this as an extension module (ie, DLL) |
| it must be compiled by the C++ compiler, as it takes the address of |
| a static data item exported from the main Python DLL. |
| */ |
| #if defined(MS_WINDOWS) || defined(__BEOS__) |
| /* BeOS suffers from the same socket dichotomy as Win32... - [cjh] */ |
| /* seem to be a few differences in the API */ |
| #define close closesocket |
| #define NO_DUP /* Actually it exists on NT 3.5, but what the heck... */ |
| #define FORCE_ANSI_FUNC_DEFS |
| #endif |
| |
| #if defined(PYOS_OS2) |
| #define close soclose |
| #define NO_DUP /* Sockets are Not Actual File Handles under OS/2 */ |
| #define FORCE_ANSI_FUNC_DEFS |
| #endif |
| |
| #ifdef FORCE_ANSI_FUNC_DEFS |
| #define BUILD_FUNC_DEF_1( fnname, arg1type, arg1name ) \ |
| fnname( arg1type arg1name ) |
| |
| #define BUILD_FUNC_DEF_2( fnname, arg1type, arg1name, arg2type, arg2name ) \ |
| fnname( arg1type arg1name, arg2type arg2name ) |
| |
| #define BUILD_FUNC_DEF_3( fnname, arg1type, arg1name, arg2type, arg2name , arg3type, arg3name ) \ |
| fnname( arg1type arg1name, arg2type arg2name, arg3type arg3name ) |
| |
| #define BUILD_FUNC_DEF_4( fnname, arg1type, arg1name, arg2type, arg2name , arg3type, arg3name, arg4type, arg4name ) \ |
| fnname( arg1type arg1name, arg2type arg2name, arg3type arg3name, arg4type arg4name ) |
| |
| #else /* !FORCE_ANSI_FN_DEFS */ |
| #define BUILD_FUNC_DEF_1( fnname, arg1type, arg1name ) \ |
| fnname( arg1name ) \ |
| arg1type arg1name; |
| |
| #define BUILD_FUNC_DEF_2( fnname, arg1type, arg1name, arg2type, arg2name ) \ |
| fnname( arg1name, arg2name ) \ |
| arg1type arg1name; \ |
| arg2type arg2name; |
| |
| #define BUILD_FUNC_DEF_3( fnname, arg1type, arg1name, arg2type, arg2name, arg3type, arg3name ) \ |
| fnname( arg1name, arg2name, arg3name ) \ |
| arg1type arg1name; \ |
| arg2type arg2name; \ |
| arg3type arg3name; |
| |
| #define BUILD_FUNC_DEF_4( fnname, arg1type, arg1name, arg2type, arg2name, arg3type, arg3name, arg4type, arg4name ) \ |
| fnname( arg1name, arg2name, arg3name, arg4name ) \ |
| arg1type arg1name; \ |
| arg2type arg2name; \ |
| arg3type arg3name; \ |
| arg4type arg4name; |
| |
| #endif /* !FORCE_ANSI_FN_DEFS */ |
| |
| /* Global variable holding the exception type for errors detected |
| by this module (but not argument type or memory errors, etc.). */ |
| |
| static PyObject *PySocket_Error; |
| |
| |
| /* Convenience function to raise an error according to errno |
| and return a NULL pointer from a function. */ |
| |
| static PyObject * |
| PySocket_Err() |
| { |
| #ifdef MS_WINDOWS |
| if (WSAGetLastError()) { |
| PyObject *v; |
| v = Py_BuildValue("(is)", WSAGetLastError(), "winsock error"); |
| if (v != NULL) { |
| PyErr_SetObject(PySocket_Error, v); |
| Py_DECREF(v); |
| } |
| return NULL; |
| } |
| else |
| #endif |
| |
| #if defined(PYOS_OS2) |
| if (sock_errno() != NO_ERROR) { |
| APIRET rc; |
| ULONG msglen; |
| char outbuf[100]; |
| int myerrorcode = sock_errno(); |
| |
| /* Retrieve Socket-Related Error Message from MPTN.MSG File */ |
| rc = DosGetMessage(NULL, 0, outbuf, sizeof(outbuf), |
| myerrorcode - SOCBASEERR + 26, "mptn.msg", &msglen); |
| if (rc == NO_ERROR) { |
| PyObject *v; |
| |
| outbuf[msglen] = '\0'; /* OS/2 Doesn't Guarantee a Terminator */ |
| if (strlen(outbuf) > 0) { /* If Non-Empty Msg, Trim CRLF */ |
| char *lastc = &outbuf[ strlen(outbuf)-1 ]; |
| while (lastc > outbuf && isspace(*lastc)) |
| *lastc-- = '\0'; /* Trim Trailing Whitespace (CRLF) */ |
| } |
| v = Py_BuildValue("(is)", myerrorcode, outbuf); |
| if (v != NULL) { |
| PyErr_SetObject(PySocket_Error, v); |
| Py_DECREF(v); |
| } |
| return NULL; |
| } |
| } |
| #endif |
| |
| return PyErr_SetFromErrno(PySocket_Error); |
| } |
| |
| |
| /* The object holding a socket. It holds some extra information, |
| like the address family, which is used to decode socket address |
| arguments properly. */ |
| |
| typedef struct { |
| PyObject_HEAD |
| int sock_fd; /* Socket file descriptor */ |
| int sock_family; /* Address family, e.g., AF_INET */ |
| int sock_type; /* Socket type, e.g., SOCK_STREAM */ |
| int sock_proto; /* Protocol type, usually 0 */ |
| union sock_addr { |
| struct sockaddr_in in; |
| #ifdef AF_UNIX |
| struct sockaddr_un un; |
| #endif |
| } sock_addr; |
| } PySocketSockObject; |
| |
| |
| /* A forward reference to the Socktype type object. |
| The Socktype variable contains pointers to various functions, |
| some of which call newsockobject(), which uses Socktype, so |
| there has to be a circular reference. */ |
| |
| staticforward PyTypeObject PySocketSock_Type; |
| |
| |
| /* Create a new socket object. |
| This just creates the object and initializes it. |
| If the creation fails, return NULL and set an exception (implicit |
| in NEWOBJ()). */ |
| |
| static PySocketSockObject * |
| BUILD_FUNC_DEF_4(PySocketSock_New,int,fd, int,family, int,type, int,proto) |
| { |
| PySocketSockObject *s; |
| PySocketSock_Type.ob_type = &PyType_Type; |
| s = PyObject_NEW(PySocketSockObject, &PySocketSock_Type); |
| if (s != NULL) { |
| s->sock_fd = fd; |
| s->sock_family = family; |
| s->sock_type = type; |
| s->sock_proto = proto; |
| } |
| return s; |
| } |
| |
| |
| /* Lock to allow python interpreter to continue, but only allow one |
| thread to be in gethostbyname */ |
| #if defined(WITH_THREAD) && !defined(HAVE_GETHOSTBYNAME_R) && !defined(MS_WINDOWS) |
| type_lock gethostbyname_lock; |
| #endif |
| |
| |
| /* Convert a string specifying a host name or one of a few symbolic |
| names to a numeric IP address. This usually calls gethostbyname() |
| to do the work; the names "" and "<broadcast>" are special. |
| Return the length (should always be 4 bytes), or negative if |
| an error occurred; then an exception is raised. */ |
| |
| static int |
| BUILD_FUNC_DEF_2(setipaddr, char*,name, struct sockaddr_in *,addr_ret) |
| { |
| struct hostent *hp; |
| int d1, d2, d3, d4; |
| char ch; |
| #ifdef HAVE_GETHOSTBYNAME_R |
| struct hostent hp_allocated; |
| char buf[1001]; |
| int buf_len = (sizeof buf) - 1; |
| int errnop; |
| #endif /* HAVE_GETHOSTBYNAME_R */ |
| |
| memset((void *) addr_ret, '\0', sizeof(*addr_ret)); |
| if (name[0] == '\0') { |
| addr_ret->sin_addr.s_addr = INADDR_ANY; |
| return 4; |
| } |
| if (name[0] == '<' && strcmp(name, "<broadcast>") == 0) { |
| addr_ret->sin_addr.s_addr = INADDR_BROADCAST; |
| return 4; |
| } |
| if (sscanf(name, "%d.%d.%d.%d%c", &d1, &d2, &d3, &d4, &ch) == 4 && |
| 0 <= d1 && d1 <= 255 && 0 <= d2 && d2 <= 255 && |
| 0 <= d3 && d3 <= 255 && 0 <= d4 && d4 <= 255) { |
| addr_ret->sin_addr.s_addr = htonl( |
| ((long) d1 << 24) | ((long) d2 << 16) | |
| ((long) d3 << 8) | ((long) d4 << 0)); |
| return 4; |
| } |
| Py_BEGIN_ALLOW_THREADS |
| #ifdef HAVE_GETHOSTBYNAME_R |
| hp = gethostbyname_r(name, &hp_allocated, buf, buf_len, &errnop); |
| #else /* not HAVE_GETHOSTBYNAME_R */ |
| #if defined(WITH_THREAD) && !defined(MS_WINDOWS) |
| acquire_lock(gethostbyname_lock,1); |
| #endif |
| hp = gethostbyname(name); |
| #if defined(WITH_THREAD) && !defined(MS_WINDOWS) |
| release_lock(gethostbyname_lock); |
| #endif |
| #endif /* HAVE_GETHOSTBYNAME_R */ |
| Py_END_ALLOW_THREADS |
| |
| if (hp == NULL) { |
| #ifdef HAVE_HSTRERROR |
| /* Let's get real error message to return */ |
| extern int h_errno; |
| PyErr_SetString(PySocket_Error, (char *)hstrerror(h_errno)); |
| #else |
| PyErr_SetString(PySocket_Error, "host not found"); |
| #endif |
| return -1; |
| } |
| memcpy((char *) &addr_ret->sin_addr, hp->h_addr, hp->h_length); |
| return hp->h_length; |
| } |
| |
| |
| /* Create a string object representing an IP address. |
| This is always a string of the form 'dd.dd.dd.dd' (with variable |
| size numbers). */ |
| |
| static PyObject * |
| BUILD_FUNC_DEF_1(makeipaddr, struct sockaddr_in *,addr) |
| { |
| long x = ntohl(addr->sin_addr.s_addr); |
| char buf[100]; |
| sprintf(buf, "%d.%d.%d.%d", |
| (int) (x>>24) & 0xff, (int) (x>>16) & 0xff, |
| (int) (x>> 8) & 0xff, (int) (x>> 0) & 0xff); |
| return PyString_FromString(buf); |
| } |
| |
| |
| /* Create an object representing the given socket address, |
| suitable for passing it back to bind(), connect() etc. |
| The family field of the sockaddr structure is inspected |
| to determine what kind of address it really is. */ |
| |
| /*ARGSUSED*/ |
| static PyObject * |
| BUILD_FUNC_DEF_2(makesockaddr,struct sockaddr *,addr, int,addrlen) |
| { |
| if (addrlen == 0) { |
| /* No address -- may be recvfrom() from known socket */ |
| Py_INCREF(Py_None); |
| return Py_None; |
| } |
| |
| #ifdef __BEOS__ |
| /* XXX: BeOS version of accept() doesn't set family coreectly */ |
| addr->sa_family = AF_INET; |
| #endif |
| |
| switch (addr->sa_family) { |
| |
| case AF_INET: |
| { |
| struct sockaddr_in *a = (struct sockaddr_in *) addr; |
| PyObject *addrobj = makeipaddr(a); |
| PyObject *ret = NULL; |
| if (addrobj) { |
| ret = Py_BuildValue("Oi", addrobj, ntohs(a->sin_port)); |
| Py_DECREF(addrobj); |
| } |
| return ret; |
| } |
| |
| #ifdef AF_UNIX |
| case AF_UNIX: |
| { |
| struct sockaddr_un *a = (struct sockaddr_un *) addr; |
| return PyString_FromString(a->sun_path); |
| } |
| #endif /* AF_UNIX */ |
| |
| /* More cases here... */ |
| |
| default: |
| /* If we don't know the address family, don't raise an |
| exception -- return it as a tuple. */ |
| return Py_BuildValue("is#", |
| addr->sa_family, |
| addr->sa_data, |
| sizeof(addr->sa_data)); |
| |
| } |
| } |
| |
| |
| /* Parse a socket address argument according to the socket object's |
| address family. Return 1 if the address was in the proper format, |
| 0 of not. The address is returned through addr_ret, its length |
| through len_ret. */ |
| |
| static int |
| BUILD_FUNC_DEF_4( |
| getsockaddrarg,PySocketSockObject *,s, PyObject *,args, struct sockaddr **,addr_ret, int *,len_ret) |
| { |
| switch (s->sock_family) { |
| |
| #ifdef AF_UNIX |
| case AF_UNIX: |
| { |
| struct sockaddr_un* addr; |
| char *path; |
| int len; |
| addr = (struct sockaddr_un* )&(s->sock_addr).un; |
| if (!PyArg_Parse(args, "s#", &path, &len)) |
| return 0; |
| if (len > sizeof addr->sun_path) { |
| PyErr_SetString(PySocket_Error, |
| "AF_UNIX path too long"); |
| return 0; |
| } |
| addr->sun_family = AF_UNIX; |
| memcpy(addr->sun_path, path, len); |
| addr->sun_path[len] = 0; |
| *addr_ret = (struct sockaddr *) addr; |
| *len_ret = len + sizeof(*addr) - sizeof(addr->sun_path); |
| return 1; |
| } |
| #endif /* AF_UNIX */ |
| |
| case AF_INET: |
| { |
| struct sockaddr_in* addr; |
| char *host; |
| int port; |
| addr=(struct sockaddr_in*)&(s->sock_addr).in; |
| if (!PyArg_Parse(args, "(si)", &host, &port)) |
| return 0; |
| if (setipaddr(host, addr) < 0) |
| return 0; |
| addr->sin_family = AF_INET; |
| addr->sin_port = htons((short)port); |
| *addr_ret = (struct sockaddr *) addr; |
| *len_ret = sizeof *addr; |
| return 1; |
| } |
| |
| /* More cases here... */ |
| |
| default: |
| PyErr_SetString(PySocket_Error, "getsockaddrarg: bad family"); |
| return 0; |
| |
| } |
| } |
| |
| |
| /* Get the address length according to the socket object's address family. |
| Return 1 if the family is known, 0 otherwise. The length is returned |
| through len_ret. */ |
| |
| static int |
| BUILD_FUNC_DEF_2(getsockaddrlen,PySocketSockObject *,s, int *,len_ret) |
| { |
| switch (s->sock_family) { |
| |
| #ifdef AF_UNIX |
| case AF_UNIX: |
| { |
| *len_ret = sizeof (struct sockaddr_un); |
| return 1; |
| } |
| #endif /* AF_UNIX */ |
| |
| case AF_INET: |
| { |
| *len_ret = sizeof (struct sockaddr_in); |
| return 1; |
| } |
| |
| /* More cases here... */ |
| |
| default: |
| PyErr_SetString(PySocket_Error, "getsockaddrarg: bad family"); |
| return 0; |
| |
| } |
| } |
| |
| |
| /* s.accept() method */ |
| |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocketSock_accept,PySocketSockObject *,s, PyObject *,args) |
| { |
| char addrbuf[256]; |
| int addrlen, newfd; |
| PyObject *sock = NULL; |
| PyObject *addr = NULL; |
| PyObject *res = NULL; |
| |
| if (!PyArg_NoArgs(args)) |
| return NULL; |
| if (!getsockaddrlen(s, &addrlen)) |
| return NULL; |
| Py_BEGIN_ALLOW_THREADS |
| newfd = accept(s->sock_fd, (struct sockaddr *) addrbuf, &addrlen); |
| Py_END_ALLOW_THREADS |
| if (newfd < 0) |
| return PySocket_Err(); |
| |
| /* Create the new object with unspecified family, |
| to avoid calls to bind() etc. on it. */ |
| sock = (PyObject *) PySocketSock_New(newfd, |
| s->sock_family, |
| s->sock_type, |
| s->sock_proto); |
| if (sock == NULL) { |
| close(newfd); |
| goto finally; |
| } |
| if (!(addr = makesockaddr((struct sockaddr *) addrbuf, addrlen))) |
| goto finally; |
| |
| if (!(res = Py_BuildValue("OO", sock, addr))) |
| goto finally; |
| |
| finally: |
| Py_XDECREF(sock); |
| Py_XDECREF(addr); |
| return res; |
| } |
| |
| static char accept_doc[] = |
| "accept() -> (socket object, address info)\n\ |
| \n\ |
| Wait for an incoming connection. Return a new socket representing the\n\ |
| connection, and the address of the client. For IP sockets, the address\n\ |
| info is a pair (hostaddr, port)."; |
| |
| |
| /* s.setblocking(1 | 0) method */ |
| |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocketSock_setblocking,PySocketSockObject*,s,PyObject*,args) |
| { |
| int block; |
| #ifndef MS_WINDOWS |
| int delay_flag; |
| #endif |
| if (!PyArg_Parse(args, "i", &block)) |
| return NULL; |
| Py_BEGIN_ALLOW_THREADS |
| #ifdef __BEOS__ |
| block = !block; |
| setsockopt( s->sock_fd, SOL_SOCKET, SO_NONBLOCK, |
| (void *)(&block), sizeof( int ) ); |
| #else |
| #ifndef MS_WINDOWS |
| #ifdef PYOS_OS2 |
| block = !block; |
| ioctl(s->sock_fd, FIONBIO, (caddr_t)&block, sizeof(block)); |
| #else /* !PYOS_OS2 */ |
| delay_flag = fcntl (s->sock_fd, F_GETFL, 0); |
| if (block) |
| delay_flag &= (~O_NDELAY); |
| else |
| delay_flag |= O_NDELAY; |
| fcntl (s->sock_fd, F_SETFL, delay_flag); |
| #endif /* !PYOS_OS2 */ |
| #else /* MS_WINDOWS */ |
| block = !block; |
| ioctlsocket(s->sock_fd, FIONBIO, (u_long*)&block); |
| #endif /* MS_WINDOWS */ |
| #endif /* __BEOS__ */ |
| Py_END_ALLOW_THREADS |
| |
| Py_INCREF(Py_None); |
| return Py_None; |
| } |
| |
| static char setblocking_doc[] = |
| "setblocking(flag)\n\ |
| \n\ |
| Set the socket to blocking (flag is true) or non-blocking (false).\n\ |
| This uses the FIONBIO ioctl with the O_NDELAY flag."; |
| |
| |
| /* s.setsockopt() method. |
| With an integer third argument, sets an integer option. |
| With a string third argument, sets an option from a buffer; |
| use optional built-in module 'struct' to encode the string. */ |
| |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocketSock_setsockopt,PySocketSockObject *,s, PyObject *,args) |
| { |
| int level; |
| int optname; |
| int res; |
| char *buf; |
| int buflen; |
| int flag; |
| |
| if (PyArg_Parse(args, "(iii)", &level, &optname, &flag)) { |
| buf = (char *) &flag; |
| buflen = sizeof flag; |
| } |
| else { |
| PyErr_Clear(); |
| if (!PyArg_Parse(args, "(iis#)", &level, &optname, |
| &buf, &buflen)) |
| return NULL; |
| } |
| res = setsockopt(s->sock_fd, level, optname, (ANY *)buf, buflen); |
| if (res < 0) |
| return PySocket_Err(); |
| Py_INCREF(Py_None); |
| return Py_None; |
| } |
| |
| static char setsockopt_doc[] = |
| "setsockopt(level, option, value)\n\ |
| \n\ |
| Set a socket option. See the Unix manual for level and option.\n\ |
| The value argument can either be an integer or a string."; |
| |
| |
| /* s.getsockopt() method. |
| With two arguments, retrieves an integer option. |
| With a third integer argument, retrieves a string buffer of that size; |
| use optional built-in module 'struct' to decode the string. */ |
| |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocketSock_getsockopt,PySocketSockObject *,s, PyObject *,args) |
| { |
| int level; |
| int optname; |
| int res; |
| PyObject *buf; |
| int buflen = 0; |
| |
| #ifdef __BEOS__ |
| /* We have incomplete socket support. */ |
| PyErr_SetString( PySocket_Error, "getsockopt not supported" ); |
| return NULL; |
| #else |
| |
| if (!PyArg_ParseTuple(args, "ii|i", &level, &optname, &buflen)) |
| return NULL; |
| |
| if (buflen == 0) { |
| int flag = 0; |
| int flagsize = sizeof flag; |
| res = getsockopt(s->sock_fd, level, optname, |
| (ANY *)&flag, &flagsize); |
| if (res < 0) |
| return PySocket_Err(); |
| return PyInt_FromLong(flag); |
| } |
| if (buflen <= 0 || buflen > 1024) { |
| PyErr_SetString(PySocket_Error, |
| "getsockopt buflen out of range"); |
| return NULL; |
| } |
| buf = PyString_FromStringAndSize((char *)NULL, buflen); |
| if (buf == NULL) |
| return NULL; |
| res = getsockopt(s->sock_fd, level, optname, |
| (ANY *)PyString_AsString(buf), &buflen); |
| if (res < 0) { |
| Py_DECREF(buf); |
| return PySocket_Err(); |
| } |
| _PyString_Resize(&buf, buflen); |
| return buf; |
| #endif /* __BEOS__ */ |
| } |
| |
| static char getsockopt_doc[] = |
| "getsockopt(level, option[, buffersize]) -> value\n\ |
| \n\ |
| Get a socket option. See the Unix manual for level and option.\n\ |
| If a nonzero buffersize argument is given, the return value is a\n\ |
| string of that length; otherwise it is an integer."; |
| |
| |
| /* s.bind(sockaddr) method */ |
| |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocketSock_bind,PySocketSockObject *,s, PyObject *,args) |
| { |
| struct sockaddr *addr; |
| int addrlen; |
| int res; |
| if (!getsockaddrarg(s, args, &addr, &addrlen)) |
| return NULL; |
| Py_BEGIN_ALLOW_THREADS |
| res = bind(s->sock_fd, addr, addrlen); |
| Py_END_ALLOW_THREADS |
| if (res < 0) |
| return PySocket_Err(); |
| Py_INCREF(Py_None); |
| return Py_None; |
| } |
| |
| static char bind_doc[] = |
| "bind(address)\n\ |
| \n\ |
| Bind the socket to a local address. For IP sockets, the address is a\n\ |
| pair (host, port); the host must refer to the local host."; |
| |
| |
| /* s.close() method. |
| Set the file descriptor to -1 so operations tried subsequently |
| will surely fail. */ |
| |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocketSock_close,PySocketSockObject *,s, PyObject *,args) |
| { |
| if (!PyArg_NoArgs(args)) |
| return NULL; |
| if (s->sock_fd != -1) { |
| Py_BEGIN_ALLOW_THREADS |
| (void) close(s->sock_fd); |
| Py_END_ALLOW_THREADS |
| } |
| s->sock_fd = -1; |
| Py_INCREF(Py_None); |
| return Py_None; |
| } |
| |
| static char close_doc[] = |
| "close()\n\ |
| \n\ |
| Close the socket. It cannot be used after this call."; |
| |
| |
| /* s.connect(sockaddr) method */ |
| |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocketSock_connect,PySocketSockObject *,s, PyObject *,args) |
| { |
| struct sockaddr *addr; |
| int addrlen; |
| int res; |
| if (!getsockaddrarg(s, args, &addr, &addrlen)) |
| return NULL; |
| Py_BEGIN_ALLOW_THREADS |
| res = connect(s->sock_fd, addr, addrlen); |
| Py_END_ALLOW_THREADS |
| if (res < 0) |
| return PySocket_Err(); |
| Py_INCREF(Py_None); |
| return Py_None; |
| } |
| |
| static char connect_doc[] = |
| "connect(address)\n\ |
| \n\ |
| Connect the socket to a remote address. For IP sockets, the address\n\ |
| is a pair (host, port)."; |
| |
| |
| /* s.connect_ex(sockaddr) method */ |
| |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocketSock_connect_ex,PySocketSockObject *,s, PyObject *,args) |
| { |
| struct sockaddr *addr; |
| int addrlen; |
| int res; |
| if (!getsockaddrarg(s, args, &addr, &addrlen)) |
| return NULL; |
| Py_BEGIN_ALLOW_THREADS |
| res = connect(s->sock_fd, addr, addrlen); |
| Py_END_ALLOW_THREADS |
| if (res != 0) |
| res = errno; |
| return PyInt_FromLong((long) res); |
| } |
| |
| static char connect_ex_doc[] = |
| "connect_ex(address)\n\ |
| \n\ |
| This is like connect(address), but returns an error code (the errno value)\n\ |
| instead of raising an exception when an error occurs."; |
| |
| |
| /* s.fileno() method */ |
| |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocketSock_fileno,PySocketSockObject *,s, PyObject *,args) |
| { |
| if (!PyArg_NoArgs(args)) |
| return NULL; |
| return PyInt_FromLong((long) s->sock_fd); |
| } |
| |
| static char fileno_doc[] = |
| "fileno() -> integer\n\ |
| \n\ |
| Return the integer file descriptor of the socket."; |
| |
| |
| #ifndef NO_DUP |
| /* s.dup() method */ |
| |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocketSock_dup,PySocketSockObject *,s, PyObject *,args) |
| { |
| int newfd; |
| PyObject *sock; |
| if (!PyArg_NoArgs(args)) |
| return NULL; |
| newfd = dup(s->sock_fd); |
| if (newfd < 0) |
| return PySocket_Err(); |
| sock = (PyObject *) PySocketSock_New(newfd, |
| s->sock_family, |
| s->sock_type, |
| s->sock_proto); |
| if (sock == NULL) |
| close(newfd); |
| return sock; |
| } |
| |
| static char dup_doc[] = |
| "dup() -> socket object\n\ |
| \n\ |
| Return a new socket object connected to the same system resource."; |
| |
| #endif |
| |
| |
| /* s.getsockname() method */ |
| |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocketSock_getsockname,PySocketSockObject *,s, PyObject *,args) |
| { |
| char addrbuf[256]; |
| int addrlen, res; |
| if (!PyArg_NoArgs(args)) |
| return NULL; |
| if (!getsockaddrlen(s, &addrlen)) |
| return NULL; |
| memset(addrbuf, 0, addrlen); |
| Py_BEGIN_ALLOW_THREADS |
| res = getsockname(s->sock_fd, (struct sockaddr *) addrbuf, &addrlen); |
| Py_END_ALLOW_THREADS |
| if (res < 0) |
| return PySocket_Err(); |
| return makesockaddr((struct sockaddr *) addrbuf, addrlen); |
| } |
| |
| static char getsockname_doc[] = |
| "getsockname() -> address info\n\ |
| \n\ |
| Return the address of the local endpoint. For IP sockets, the address\n\ |
| info is a pair (hostaddr, port)."; |
| |
| |
| #ifdef HAVE_GETPEERNAME /* Cray APP doesn't have this :-( */ |
| /* s.getpeername() method */ |
| |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocketSock_getpeername,PySocketSockObject *,s, PyObject *,args) |
| { |
| char addrbuf[256]; |
| int addrlen, res; |
| if (!PyArg_NoArgs(args)) |
| return NULL; |
| if (!getsockaddrlen(s, &addrlen)) |
| return NULL; |
| Py_BEGIN_ALLOW_THREADS |
| res = getpeername(s->sock_fd, (struct sockaddr *) addrbuf, &addrlen); |
| Py_END_ALLOW_THREADS |
| if (res < 0) |
| return PySocket_Err(); |
| return makesockaddr((struct sockaddr *) addrbuf, addrlen); |
| } |
| |
| static char getpeername_doc[] = |
| "getpeername() -> address info\n\ |
| \n\ |
| Return the address of the remote endpoint. For IP sockets, the address\n\ |
| info is a pair (hostaddr, port)."; |
| |
| #endif /* HAVE_GETPEERNAME */ |
| |
| |
| /* s.listen(n) method */ |
| |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocketSock_listen,PySocketSockObject *,s, PyObject *,args) |
| { |
| int backlog; |
| int res; |
| if (!PyArg_Parse(args, "i", &backlog)) |
| return NULL; |
| Py_BEGIN_ALLOW_THREADS |
| if (backlog < 1) |
| backlog = 1; |
| res = listen(s->sock_fd, backlog); |
| Py_END_ALLOW_THREADS |
| if (res < 0) |
| return PySocket_Err(); |
| Py_INCREF(Py_None); |
| return Py_None; |
| } |
| |
| static char listen_doc[] = |
| "listen(backlog)\n\ |
| \n\ |
| Enable a server to accept connections. The backlog argument must be at\n\ |
| least 1; it specifies the number of unaccepted connection that the system\n\ |
| will allow before refusing new connections."; |
| |
| |
| #ifndef NO_DUP |
| /* s.makefile(mode) method. |
| Create a new open file object referring to a dupped version of |
| the socket's file descriptor. (The dup() call is necessary so |
| that the open file and socket objects may be closed independent |
| of each other.) |
| The mode argument specifies 'r' or 'w' passed to fdopen(). */ |
| |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocketSock_makefile,PySocketSockObject *,s, PyObject *,args) |
| { |
| extern int fclose Py_PROTO((FILE *)); |
| char *mode = "r"; |
| int bufsize = -1; |
| int fd; |
| FILE *fp; |
| PyObject *f; |
| |
| if (!PyArg_ParseTuple(args, "|si", &mode, &bufsize)) |
| return NULL; |
| #ifdef MS_WIN32 |
| if (((fd = _open_osfhandle(s->sock_fd, _O_BINARY)) < 0) || |
| ((fd = dup(fd)) < 0) || ((fp = fdopen(fd, mode)) == NULL)) |
| #else |
| if ((fd = dup(s->sock_fd)) < 0 || (fp = fdopen(fd, mode)) == NULL) |
| #endif |
| { |
| if (fd >= 0) |
| close(fd); |
| return PySocket_Err(); |
| } |
| f = PyFile_FromFile(fp, "<socket>", mode, fclose); |
| if (f != NULL) |
| PyFile_SetBufSize(f, bufsize); |
| return f; |
| } |
| |
| static char makefile_doc[] = |
| "makefile([mode[, buffersize]]) -> file object\n\ |
| \n\ |
| Return a regular file object corresponding to the socket.\n\ |
| The mode and buffersize arguments are as for the built-in open() function."; |
| |
| #endif /* NO_DUP */ |
| |
| |
| /* s.recv(nbytes [,flags]) method */ |
| |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocketSock_recv,PySocketSockObject *,s, PyObject *,args) |
| { |
| int len, n, flags = 0; |
| PyObject *buf; |
| if (!PyArg_ParseTuple(args, "i|i", &len, &flags)) |
| return NULL; |
| buf = PyString_FromStringAndSize((char *) 0, len); |
| if (buf == NULL) |
| return NULL; |
| Py_BEGIN_ALLOW_THREADS |
| n = recv(s->sock_fd, PyString_AsString(buf), len, flags); |
| Py_END_ALLOW_THREADS |
| if (n < 0) { |
| Py_DECREF(buf); |
| return PySocket_Err(); |
| } |
| if (n != len && _PyString_Resize(&buf, n) < 0) |
| return NULL; |
| return buf; |
| } |
| |
| static char recv_doc[] = |
| "recv(buffersize[, flags]) -> data\n\ |
| \n\ |
| Receive up to buffersize bytes from the socket. For the optional flags\n\ |
| argument, see the Unix manual. When no data is available, block until\n\ |
| at least one byte is available or until the remote end is closed. When\n\ |
| the remote end is closed and all data is read, return the empty string."; |
| |
| |
| /* s.recvfrom(nbytes [,flags]) method */ |
| |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocketSock_recvfrom,PySocketSockObject *,s, PyObject *,args) |
| { |
| char addrbuf[256]; |
| PyObject *buf = NULL; |
| PyObject *addr = NULL; |
| PyObject *ret = NULL; |
| |
| int addrlen, len, n, flags = 0; |
| if (!PyArg_ParseTuple(args, "i|i", &len, &flags)) |
| return NULL; |
| if (!getsockaddrlen(s, &addrlen)) |
| return NULL; |
| buf = PyString_FromStringAndSize((char *) 0, len); |
| if (buf == NULL) |
| return NULL; |
| Py_BEGIN_ALLOW_THREADS |
| n = recvfrom(s->sock_fd, PyString_AsString(buf), len, flags, |
| #ifndef MS_WINDOWS |
| #if defined(PYOS_OS2) |
| (struct sockaddr *)addrbuf, &addrlen |
| #else |
| (ANY *)addrbuf, &addrlen |
| #endif |
| #else |
| (struct sockaddr *)addrbuf, &addrlen |
| #endif |
| ); |
| Py_END_ALLOW_THREADS |
| if (n < 0) { |
| Py_DECREF(buf); |
| return PySocket_Err(); |
| } |
| if (n != len && _PyString_Resize(&buf, n) < 0) |
| return NULL; |
| |
| if (!(addr = makesockaddr((struct sockaddr *)addrbuf, addrlen))) |
| goto finally; |
| |
| ret = Py_BuildValue("OO", buf, addr); |
| finally: |
| Py_XDECREF(addr); |
| Py_XDECREF(buf); |
| return ret; |
| } |
| |
| static char recvfrom_doc[] = |
| "recvfrom(buffersize[, flags]) -> (data, address info)\n\ |
| \n\ |
| Like recv(buffersize, flags) but also return the sender's address info."; |
| |
| |
| /* s.send(data [,flags]) method */ |
| |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocketSock_send,PySocketSockObject *,s, PyObject *,args) |
| { |
| char *buf; |
| int len, n, flags = 0; |
| if (!PyArg_ParseTuple(args, "s#|i", &buf, &len, &flags)) |
| return NULL; |
| Py_BEGIN_ALLOW_THREADS |
| n = send(s->sock_fd, buf, len, flags); |
| Py_END_ALLOW_THREADS |
| if (n < 0) |
| return PySocket_Err(); |
| return PyInt_FromLong((long)n); |
| } |
| |
| static char send_doc[] = |
| "send(data[, flags])\n\ |
| \n\ |
| Send a data string to the socket. For the optional flags\n\ |
| argument, see the Unix manual."; |
| |
| |
| /* s.sendto(data, [flags,] sockaddr) method */ |
| |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocketSock_sendto,PySocketSockObject *,s, PyObject *,args) |
| { |
| PyObject *addro; |
| char *buf; |
| struct sockaddr *addr; |
| int addrlen, len, n, flags; |
| flags = 0; |
| if (!PyArg_Parse(args, "(s#O)", &buf, &len, &addro)) { |
| PyErr_Clear(); |
| if (!PyArg_Parse(args, "(s#iO)", &buf, &len, &flags, &addro)) |
| return NULL; |
| } |
| if (!getsockaddrarg(s, addro, &addr, &addrlen)) |
| return NULL; |
| Py_BEGIN_ALLOW_THREADS |
| n = sendto(s->sock_fd, buf, len, flags, addr, addrlen); |
| Py_END_ALLOW_THREADS |
| if (n < 0) |
| return PySocket_Err(); |
| return PyInt_FromLong((long)n); |
| } |
| |
| static char sendto_doc[] = |
| "sendto(data[, flags], address)\n\ |
| \n\ |
| Like send(data, flags) but allows specifying the destination address.\n\ |
| For IP sockets, the address is a pair (hostaddr, port)."; |
| |
| |
| /* s.shutdown(how) method */ |
| |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocketSock_shutdown,PySocketSockObject *,s, PyObject *,args) |
| { |
| int how; |
| int res; |
| if (!PyArg_Parse(args, "i", &how)) |
| return NULL; |
| Py_BEGIN_ALLOW_THREADS |
| res = shutdown(s->sock_fd, how); |
| Py_END_ALLOW_THREADS |
| if (res < 0) |
| return PySocket_Err(); |
| Py_INCREF(Py_None); |
| return Py_None; |
| } |
| |
| static char shutdown_doc[] = |
| "shutdown(flag)\n\ |
| \n\ |
| Shut down the reading side of the socket (flag == 0), the writing side\n\ |
| of the socket (flag == 1), or both ends (flag == 2)."; |
| |
| |
| /* List of methods for socket objects */ |
| |
| static PyMethodDef PySocketSock_methods[] = { |
| {"accept", (PyCFunction)PySocketSock_accept, 0, |
| accept_doc}, |
| {"bind", (PyCFunction)PySocketSock_bind, 0, |
| bind_doc}, |
| {"close", (PyCFunction)PySocketSock_close, 0, |
| close_doc}, |
| {"connect", (PyCFunction)PySocketSock_connect, 0, |
| connect_doc}, |
| {"connect_ex", (PyCFunction)PySocketSock_connect_ex, 0, |
| connect_ex_doc}, |
| #ifndef NO_DUP |
| {"dup", (PyCFunction)PySocketSock_dup, 0, |
| dup_doc}, |
| #endif |
| {"fileno", (PyCFunction)PySocketSock_fileno, 0, |
| fileno_doc}, |
| #ifdef HAVE_GETPEERNAME |
| {"getpeername", (PyCFunction)PySocketSock_getpeername, 0, |
| getpeername_doc}, |
| #endif |
| {"getsockname", (PyCFunction)PySocketSock_getsockname, 0, |
| getsockname_doc}, |
| {"getsockopt", (PyCFunction)PySocketSock_getsockopt, 1, |
| getsockopt_doc}, |
| {"listen", (PyCFunction)PySocketSock_listen, 0, |
| listen_doc}, |
| #ifndef NO_DUP |
| {"makefile", (PyCFunction)PySocketSock_makefile, 1, |
| makefile_doc}, |
| #endif |
| {"recv", (PyCFunction)PySocketSock_recv, 1, |
| recv_doc}, |
| {"recvfrom", (PyCFunction)PySocketSock_recvfrom, 1, |
| recvfrom_doc}, |
| {"send", (PyCFunction)PySocketSock_send, 1, |
| send_doc}, |
| {"sendto", (PyCFunction)PySocketSock_sendto, 0, |
| sendto_doc}, |
| {"setblocking", (PyCFunction)PySocketSock_setblocking, 0, |
| setblocking_doc}, |
| {"setsockopt", (PyCFunction)PySocketSock_setsockopt, 0, |
| setsockopt_doc}, |
| {"shutdown", (PyCFunction)PySocketSock_shutdown, 0, |
| shutdown_doc}, |
| {NULL, NULL} /* sentinel */ |
| }; |
| |
| |
| /* Deallocate a socket object in response to the last Py_DECREF(). |
| First close the file description. */ |
| |
| static void |
| BUILD_FUNC_DEF_1(PySocketSock_dealloc,PySocketSockObject *,s) |
| { |
| (void) close(s->sock_fd); |
| PyMem_DEL(s); |
| } |
| |
| |
| /* Return a socket object's named attribute. */ |
| |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocketSock_getattr,PySocketSockObject *,s, char *,name) |
| { |
| return Py_FindMethod(PySocketSock_methods, (PyObject *) s, name); |
| } |
| |
| |
| static PyObject * |
| BUILD_FUNC_DEF_1(PySocketSock_repr,PySocketSockObject *,s) |
| { |
| char buf[512]; |
| sprintf(buf, |
| "<socket object, fd=%d, family=%d, type=%d, protocol=%d>", |
| s->sock_fd, s->sock_family, s->sock_type, s->sock_proto); |
| return PyString_FromString(buf); |
| } |
| |
| |
| /* Type object for socket objects. */ |
| |
| static PyTypeObject PySocketSock_Type = { |
| PyObject_HEAD_INIT(0) /* Must fill in type value later */ |
| 0, |
| "socket", |
| sizeof(PySocketSockObject), |
| 0, |
| (destructor)PySocketSock_dealloc, /*tp_dealloc*/ |
| 0, /*tp_print*/ |
| (getattrfunc)PySocketSock_getattr, /*tp_getattr*/ |
| 0, /*tp_setattr*/ |
| 0, /*tp_compare*/ |
| (reprfunc)PySocketSock_repr, /*tp_repr*/ |
| 0, /*tp_as_number*/ |
| 0, /*tp_as_sequence*/ |
| 0, /*tp_as_mapping*/ |
| }; |
| |
| |
| /* Python interface to gethostname(). */ |
| |
| /*ARGSUSED*/ |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocket_gethostname,PyObject *,self, PyObject *,args) |
| { |
| char buf[1024]; |
| int res; |
| if (!PyArg_NoArgs(args)) |
| return NULL; |
| Py_BEGIN_ALLOW_THREADS |
| res = gethostname(buf, (int) sizeof buf - 1); |
| Py_END_ALLOW_THREADS |
| if (res < 0) |
| return PySocket_Err(); |
| buf[sizeof buf - 1] = '\0'; |
| return PyString_FromString(buf); |
| } |
| |
| static char gethostname_doc[] = |
| "gethostname() -> string\n\ |
| \n\ |
| Return the current host name."; |
| |
| |
| /* Python interface to gethostbyname(name). */ |
| |
| /*ARGSUSED*/ |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocket_gethostbyname,PyObject *,self, PyObject *,args) |
| { |
| char *name; |
| struct sockaddr_in addrbuf; |
| if (!PyArg_Parse(args, "s", &name)) |
| return NULL; |
| if (setipaddr(name, &addrbuf) < 0) |
| return NULL; |
| return makeipaddr(&addrbuf); |
| } |
| |
| static char gethostbyname_doc[] = |
| "gethostbyname(host) -> address\n\ |
| \n\ |
| Return the IP address (a string of the form '255.255.255.255') for a host."; |
| |
| |
| /* Convenience function common to gethostbyname_ex and gethostbyaddr */ |
| |
| static PyObject * |
| gethost_common(h, addr) |
| struct hostent *h; |
| struct sockaddr_in *addr; |
| { |
| char **pch; |
| PyObject *rtn_tuple = (PyObject *)NULL; |
| PyObject *name_list = (PyObject *)NULL; |
| PyObject *addr_list = (PyObject *)NULL; |
| PyObject *tmp; |
| if (h == NULL) { |
| #ifdef HAVE_HSTRERROR |
| /* Let's get real error message to return */ |
| extern int h_errno; |
| PyErr_SetString(PySocket_Error, (char *)hstrerror(h_errno)); |
| #else |
| PyErr_SetString(PySocket_Error, "host not found"); |
| #endif |
| return NULL; |
| } |
| if ((name_list = PyList_New(0)) == NULL) |
| goto err; |
| if ((addr_list = PyList_New(0)) == NULL) |
| goto err; |
| for (pch = h->h_aliases; *pch != NULL; pch++) { |
| int status; |
| tmp = PyString_FromString(*pch); |
| if (tmp == NULL) |
| goto err; |
| status = PyList_Append(name_list, tmp); |
| Py_DECREF(tmp); |
| if (status) |
| goto err; |
| } |
| for (pch = h->h_addr_list; *pch != NULL; pch++) { |
| int status; |
| memcpy((char *) &addr->sin_addr, *pch, h->h_length); |
| tmp = makeipaddr(addr); |
| if (tmp == NULL) |
| goto err; |
| status = PyList_Append(addr_list, tmp); |
| Py_DECREF(tmp); |
| if (status) |
| goto err; |
| } |
| rtn_tuple = Py_BuildValue("sOO", h->h_name, name_list, addr_list); |
| err: |
| Py_XDECREF(name_list); |
| Py_XDECREF(addr_list); |
| return rtn_tuple; |
| } |
| |
| |
| /* Python interface to gethostbyname_ex(name). */ |
| |
| /*ARGSUSED*/ |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocket_gethostbyname_ex,PyObject *,self, PyObject *,args) |
| { |
| char *name; |
| struct hostent *h; |
| struct sockaddr_in addr; |
| #ifdef HAVE_GETHOSTBYNAME_R |
| struct hostent hp_allocated; |
| char buf[16384]; |
| int buf_len = (sizeof buf) - 1; |
| int errnop; |
| #endif /* HAVE_GETHOSTBYNAME_R */ |
| if (!PyArg_Parse(args, "s", &name)) |
| return NULL; |
| if (setipaddr(name, &addr) < 0) |
| return NULL; |
| Py_BEGIN_ALLOW_THREADS |
| #ifdef HAVE_GETHOSTBYNAME_R |
| h = gethostbyname_r(name, &hp_allocated, buf, buf_len, &errnop); |
| #else /* not HAVE_GETHOSTBYNAME_R */ |
| #if defined(WITH_THREAD) && !defined(MS_WINDOWS) |
| acquire_lock(gethostbyname_lock,1); |
| #endif |
| h = gethostbyname(name); |
| #if defined(WITH_THREAD) && !defined(MS_WINDOWS) |
| release_lock(gethostbyname_lock); |
| #endif |
| #endif /* HAVE_GETHOSTBYNAME_R */ |
| Py_END_ALLOW_THREADS |
| return gethost_common(h,&addr); |
| } |
| |
| static char ghbn_ex_doc[] = |
| "gethostbyname_ex(host) -> (name, aliaslist, addresslist)\n\ |
| \n\ |
| Return the true host name, a list of aliases, and a list of IP addresses,\n\ |
| for a host. The host argument is a string giving a host name or IP number."; |
| |
| |
| /* Python interface to gethostbyaddr(IP). */ |
| |
| /*ARGSUSED*/ |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocket_gethostbyaddr,PyObject *,self, PyObject *, args) |
| { |
| struct sockaddr_in addr; |
| char *ip_num; |
| struct hostent *h; |
| #ifdef HAVE_GETHOSTBYNAME_R |
| struct hostent hp_allocated; |
| char buf[16384]; |
| int buf_len = (sizeof buf) - 1; |
| int errnop; |
| #endif /* HAVE_GETHOSTBYNAME_R */ |
| |
| if (!PyArg_Parse(args, "s", &ip_num)) |
| return NULL; |
| if (setipaddr(ip_num, &addr) < 0) |
| return NULL; |
| Py_BEGIN_ALLOW_THREADS |
| #ifdef HAVE_GETHOSTBYNAME_R |
| h = gethostbyaddr_r((char *)&addr.sin_addr, |
| sizeof(addr.sin_addr), |
| AF_INET, |
| &hp_allocated, buf, buf_len, &errnop); |
| #else /* not HAVE_GETHOSTBYNAME_R */ |
| #if defined(WITH_THREAD) && !defined(MS_WINDOWS) |
| acquire_lock(gethostbyname_lock,1); |
| #endif |
| h = gethostbyaddr((char *)&addr.sin_addr, |
| sizeof(addr.sin_addr), |
| AF_INET); |
| #if defined(WITH_THREAD) && !defined(MS_WINDOWS) |
| release_lock(gethostbyname_lock); |
| #endif |
| #endif /* HAVE_GETHOSTBYNAME_R */ |
| Py_END_ALLOW_THREADS |
| return gethost_common(h,&addr); |
| } |
| |
| static char gethostbyaddr_doc[] = |
| "gethostbyaddr(host) -> (name, aliaslist, addresslist)\n\ |
| \n\ |
| Return the true host name, a list of aliases, and a list of IP addresses,\n\ |
| for a host. The host argument is a string giving a host name or IP number."; |
| |
| |
| /* Python interface to getservbyname(name). |
| This only returns the port number, since the other info is already |
| known or not useful (like the list of aliases). */ |
| |
| /*ARGSUSED*/ |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocket_getservbyname,PyObject *,self, PyObject *,args) |
| { |
| char *name, *proto; |
| struct servent *sp; |
| if (!PyArg_Parse(args, "(ss)", &name, &proto)) |
| return NULL; |
| Py_BEGIN_ALLOW_THREADS |
| sp = getservbyname(name, proto); |
| Py_END_ALLOW_THREADS |
| if (sp == NULL) { |
| PyErr_SetString(PySocket_Error, "service/proto not found"); |
| return NULL; |
| } |
| return PyInt_FromLong((long) ntohs(sp->s_port)); |
| } |
| |
| static char getservbyname_doc[] = |
| "getservbyname(servicename, protocolname) -> integer\n\ |
| \n\ |
| Return a port number from a service name and protocol name.\n\ |
| The protocol name should be 'tcp' or 'udp'."; |
| |
| |
| /* Python interface to getprotobyname(name). |
| This only returns the protocol number, since the other info is |
| already known or not useful (like the list of aliases). */ |
| |
| /*ARGSUSED*/ |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocket_getprotobyname,PyObject *,self, PyObject *,args) |
| { |
| char *name; |
| struct protoent *sp; |
| #ifdef __BEOS__ |
| /* Not available in BeOS yet. - [cjh] */ |
| PyErr_SetString( PySocket_Error, "getprotobyname not supported" ); |
| return NULL; |
| #else |
| if (!PyArg_Parse(args, "s", &name)) |
| return NULL; |
| Py_BEGIN_ALLOW_THREADS |
| sp = getprotobyname(name); |
| Py_END_ALLOW_THREADS |
| if (sp == NULL) { |
| PyErr_SetString(PySocket_Error, "protocol not found"); |
| return NULL; |
| } |
| return PyInt_FromLong((long) sp->p_proto); |
| #endif |
| } |
| |
| static char getprotobyname_doc[] = |
| "getprotobyname(name) -> integer\n\ |
| \n\ |
| Return the protocol number for the named protocol. (Rarely used.)"; |
| |
| |
| /* Python interface to socket(family, type, proto). |
| The third (protocol) argument is optional. |
| Return a new socket object. */ |
| |
| /*ARGSUSED*/ |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocket_socket,PyObject *,self, PyObject *,args) |
| { |
| PySocketSockObject *s; |
| #ifdef MS_WINDOWS |
| SOCKET fd; |
| #else |
| int fd; |
| #endif |
| int family, type, proto = 0; |
| if (!PyArg_ParseTuple(args, "ii|i", &family, &type, &proto)) |
| return NULL; |
| Py_BEGIN_ALLOW_THREADS |
| fd = socket(family, type, proto); |
| Py_END_ALLOW_THREADS |
| #ifdef MS_WINDOWS |
| if (fd == INVALID_SOCKET) |
| #else |
| if (fd < 0) |
| #endif |
| return PySocket_Err(); |
| s = PySocketSock_New(fd, family, type, proto); |
| /* If the object can't be created, don't forget to close the |
| file descriptor again! */ |
| if (s == NULL) |
| (void) close(fd); |
| /* From now on, ignore SIGPIPE and let the error checking |
| do the work. */ |
| #ifdef SIGPIPE |
| (void) signal(SIGPIPE, SIG_IGN); |
| #endif |
| return (PyObject *) s; |
| } |
| |
| static char socket_doc[] = |
| "socket(family, type[, proto]) -> socket object\n\ |
| \n\ |
| Open a socket of the given type. The family argument specifies the\n\ |
| address family; it is normally AF_INET, sometimes AF_UNIX.\n\ |
| The type argument specifies whether this is a stream (SOCK_STREAM)\n\ |
| or datagram (SOCK_DGRAM) socket. The protocol argument defaults to 0,\n\ |
| specifying the default protocol."; |
| |
| |
| #ifndef NO_DUP |
| /* Create a socket object from a numeric file description. |
| Useful e.g. if stdin is a socket. |
| Additional arguments as for socket(). */ |
| |
| /*ARGSUSED*/ |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocket_fromfd,PyObject *,self, PyObject *,args) |
| { |
| PySocketSockObject *s; |
| int fd, family, type, proto = 0; |
| if (!PyArg_ParseTuple(args, "iii|i", &fd, &family, &type, &proto)) |
| return NULL; |
| /* Dup the fd so it and the socket can be closed independently */ |
| fd = dup(fd); |
| if (fd < 0) |
| return PySocket_Err(); |
| s = PySocketSock_New(fd, family, type, proto); |
| /* From now on, ignore SIGPIPE and let the error checking |
| do the work. */ |
| #ifdef SIGPIPE |
| (void) signal(SIGPIPE, SIG_IGN); |
| #endif |
| return (PyObject *) s; |
| } |
| |
| static char fromfd_doc[] = |
| "fromfd(fd, family, type[, proto]) -> socket object\n\ |
| \n\ |
| Create a socket object from the given file descriptor.\n\ |
| The remaining arguments are the same as for socket()."; |
| |
| #endif /* NO_DUP */ |
| |
| |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocket_ntohs, PyObject *, self, PyObject *, args) |
| { |
| int x1, x2; |
| |
| if (!PyArg_Parse(args, "i", &x1)) { |
| return NULL; |
| } |
| x2 = (int)ntohs((short)x1); |
| return PyInt_FromLong(x2); |
| } |
| |
| static char ntohs_doc[] = |
| "ntohs(integer) -> integer\n\ |
| \n\ |
| Convert a 16-bit integer from network to host byte order."; |
| |
| |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocket_ntohl, PyObject *, self, PyObject *, args) |
| { |
| int x1, x2; |
| |
| if (!PyArg_Parse(args, "i", &x1)) { |
| return NULL; |
| } |
| x2 = ntohl(x1); |
| return PyInt_FromLong(x2); |
| } |
| |
| static char ntohl_doc[] = |
| "ntohl(integer) -> integer\n\ |
| \n\ |
| Convert a 32-bit integer from network to host byte order."; |
| |
| |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocket_htons, PyObject *, self, PyObject *, args) |
| { |
| int x1, x2; |
| |
| if (!PyArg_Parse(args, "i", &x1)) { |
| return NULL; |
| } |
| x2 = (int)htons((short)x1); |
| return PyInt_FromLong(x2); |
| } |
| |
| static char htons_doc[] = |
| "htons(integer) -> integer\n\ |
| \n\ |
| Convert a 16-bit integer from host to network byte order."; |
| |
| |
| static PyObject * |
| BUILD_FUNC_DEF_2(PySocket_htonl, PyObject *, self, PyObject *, args) |
| { |
| int x1, x2; |
| |
| if (!PyArg_Parse(args, "i", &x1)) { |
| return NULL; |
| } |
| x2 = htonl(x1); |
| return PyInt_FromLong(x2); |
| } |
| |
| static char htonl_doc[] = |
| "htonl(integer) -> integer\n\ |
| \n\ |
| Convert a 32-bit integer from host to network byte order."; |
| |
| |
| /* List of functions exported by this module. */ |
| |
| static PyMethodDef PySocket_methods[] = { |
| {"gethostbyname", PySocket_gethostbyname, 0, gethostbyname_doc}, |
| {"gethostbyname_ex", PySocket_gethostbyname_ex, 0, ghbn_ex_doc}, |
| {"gethostbyaddr", PySocket_gethostbyaddr, 0, gethostbyaddr_doc}, |
| {"gethostname", PySocket_gethostname, 0, gethostname_doc}, |
| {"getservbyname", PySocket_getservbyname, 0, getservbyname_doc}, |
| {"getprotobyname", PySocket_getprotobyname, 0,getprotobyname_doc}, |
| {"socket", PySocket_socket, 1, socket_doc}, |
| #ifndef NO_DUP |
| {"fromfd", PySocket_fromfd, 1, fromfd_doc}, |
| #endif |
| {"ntohs", PySocket_ntohs, 0, ntohs_doc}, |
| {"ntohl", PySocket_ntohl, 0, ntohl_doc}, |
| {"htons", PySocket_htons, 0, htons_doc}, |
| {"htonl", PySocket_htonl, 0, htonl_doc}, |
| {NULL, NULL} /* Sentinel */ |
| }; |
| |
| |
| /* Convenience routine to export an integer value. |
| * |
| * Errors are silently ignored, for better or for worse... |
| */ |
| static void |
| BUILD_FUNC_DEF_3(insint,PyObject *,d, char *,name, int,value) |
| { |
| PyObject *v = PyInt_FromLong((long) value); |
| if (!v || PyDict_SetItemString(d, name, v)) |
| PyErr_Clear(); |
| |
| Py_XDECREF(v); |
| } |
| |
| |
| #ifdef MS_WINDOWS |
| |
| /* Additional initialization and cleanup for NT/Windows */ |
| |
| static void |
| NTcleanup() |
| { |
| WSACleanup(); |
| } |
| |
| static int |
| NTinit() |
| { |
| WSADATA WSAData; |
| int ret; |
| char buf[100]; |
| ret = WSAStartup(0x0101, &WSAData); |
| switch (ret) { |
| case 0: /* no error */ |
| atexit(NTcleanup); |
| return 1; |
| case WSASYSNOTREADY: |
| PyErr_SetString(PyExc_ImportError, |
| "WSAStartup failed: network not ready"); |
| break; |
| case WSAVERNOTSUPPORTED: |
| case WSAEINVAL: |
| PyErr_SetString(PyExc_ImportError, |
| "WSAStartup failed: requested version not supported"); |
| break; |
| default: |
| sprintf(buf, "WSAStartup failed: error code %d", ret); |
| PyErr_SetString(PyExc_ImportError, buf); |
| break; |
| } |
| return 0; |
| } |
| |
| #endif /* MS_WINDOWS */ |
| |
| #if defined(PYOS_OS2) |
| |
| /* Additional initialization and cleanup for OS/2 */ |
| |
| static void |
| OS2cleanup() |
| { |
| /* No cleanup is necessary for OS/2 Sockets */ |
| } |
| |
| static int |
| OS2init() |
| { |
| char reason[64]; |
| int rc = sock_init(); |
| |
| if (rc == 0) { |
| atexit(OS2cleanup); |
| return 1; /* Indicate Success */ |
| } |
| |
| sprintf(reason, "OS/2 TCP/IP Error# %d", sock_errno()); |
| PyErr_SetString(PyExc_ImportError, reason); |
| |
| return 0; /* Indicate Failure */ |
| } |
| |
| #endif /* PYOS_OS2 */ |
| |
| |
| /* Initialize this module. |
| * This is called when the first 'import socket' is done, |
| * via a table in config.c, if config.c is compiled with USE_SOCKET |
| * defined. |
| * |
| * For MS_WINDOWS (which means any Windows variant), this module |
| * is actually called "_socket", and there's a wrapper "socket.py" |
| * which implements some missing functionality (such as makefile(), |
| * dup() and fromfd()). The import of "_socket" may fail with an |
| * ImportError exception if initialization of WINSOCK fails. When |
| * WINSOCK is initialized succesfully, a call to WSACleanup() is |
| * scheduled to be made at exit time. |
| * |
| * For OS/2, this module is also called "_socket" and uses a wrapper |
| * "socket.py" which implements that functionality that is missing |
| * when PC operating systems don't put socket descriptors in the |
| * operating system's filesystem layer. |
| */ |
| |
| static char module_doc[] = |
| "This module provides socket operations and some related functions.\n\ |
| On Unix, it supports IP (Internet Protocol) and Unix domain sockets.\n\ |
| On other systems, it only supports IP.\n\ |
| \n\ |
| Functions:\n\ |
| \n\ |
| socket() -- create a new socket object\n\ |
| fromfd() -- create a socket object from an open file descriptor (*)\n\ |
| gethostname() -- return the current hostname\n\ |
| gethostbyname() -- map a hostname to its IP number\n\ |
| gethostbyaddr() -- map an IP number or hostname to DNS info\n\ |
| getservbyname() -- map a service name and a protocol name to a port number\n\ |
| getprotobyname() -- mape a protocol name (e.g. 'tcp') to a number\n\ |
| ntohs(), ntohl() -- convert 16, 32 bit int from network to host byte order\n\ |
| htons(), htonl() -- convert 16, 32 bit int from host to network byte order\n\ |
| \n\ |
| (*) not available on all platforms!)\n\ |
| \n\ |
| Special objects:\n\ |
| \n\ |
| SocketType -- type object for socket objects\n\ |
| error -- exception raised for I/O errors\n\ |
| \n\ |
| Integer constants:\n\ |
| \n\ |
| AF_INET, AF_UNIX -- socket domains (first argument to socket() call)\n\ |
| SOCK_STREAM, SOCK_DGRAM, SOCK_RAW -- socket types (second argument)\n\ |
| \n\ |
| Many other constants may be defined; these may be used in calls to\n\ |
| the setsockopt() and getsockopt() methods.\n\ |
| "; |
| |
| static char sockettype_doc[] = |
| "A socket represents one endpoint of a network connection.\n\ |
| \n\ |
| Methods:\n\ |
| \n\ |
| accept() -- accept a connection, returning new socket and client address\n\ |
| bind() -- bind the socket to a local address\n\ |
| close() -- close the socket\n\ |
| connect() -- connect the socket to a remote address\n\ |
| connect_ex() -- connect, return an error code instead of an exception \n\ |
| dup() -- return a new socket object identical to the current one (*)\n\ |
| fileno() -- return underlying file descriptor\n\ |
| getpeername() -- return remote address (*)\n\ |
| getsockname() -- return local address\n\ |
| getsockopt() -- get socket options\n\ |
| listen() -- start listening for incoming connections\n\ |
| makefile() -- return a file object corresponding tot the socket (*)\n\ |
| recv() -- receive data\n\ |
| recvfrom() -- receive data and sender's address\n\ |
| send() -- send data\n\ |
| sendto() -- send data to a given address\n\ |
| setblocking() -- set or clear the blocking I/O flag\n\ |
| setsockopt() -- set socket options\n\ |
| shutdown() -- shut down traffic in one or both directions\n\ |
| \n\ |
| (*) not available on all platforms!)"; |
| |
| void |
| #if defined(MS_WINDOWS) || defined(PYOS_OS2) || defined(__BEOS__) |
| init_socket() |
| #else |
| initsocket() |
| #endif |
| { |
| PyObject *m, *d; |
| #ifdef MS_WINDOWS |
| if (!NTinit()) |
| return; |
| m = Py_InitModule3("_socket", PySocket_methods, module_doc); |
| #else |
| #if defined(__TOS_OS2__) |
| if (!OS2init()) |
| return; |
| m = Py_InitModule3("_socket", PySocket_methods, module_doc); |
| #else |
| #if defined(__BEOS__) |
| m = Py_InitModule3("_socket", PySocket_methods, module_doc); |
| #else |
| m = Py_InitModule3("socket", PySocket_methods, module_doc); |
| #endif /* __BEOS__ */ |
| #endif |
| #endif |
| d = PyModule_GetDict(m); |
| PySocket_Error = PyErr_NewException("socket.error", NULL, NULL); |
| if (PySocket_Error == NULL) |
| return; |
| PyDict_SetItemString(d, "error", PySocket_Error); |
| PySocketSock_Type.ob_type = &PyType_Type; |
| PySocketSock_Type.tp_doc = sockettype_doc; |
| Py_INCREF(&PySocketSock_Type); |
| if (PyDict_SetItemString(d, "SocketType", |
| (PyObject *)&PySocketSock_Type) != 0) |
| return; |
| insint(d, "AF_INET", AF_INET); |
| #ifdef AF_UNIX |
| insint(d, "AF_UNIX", AF_UNIX); |
| #endif /* AF_UNIX */ |
| insint(d, "SOCK_STREAM", SOCK_STREAM); |
| insint(d, "SOCK_DGRAM", SOCK_DGRAM); |
| #ifndef __BEOS__ |
| /* We have incomplete socket support. */ |
| insint(d, "SOCK_RAW", SOCK_RAW); |
| insint(d, "SOCK_SEQPACKET", SOCK_SEQPACKET); |
| insint(d, "SOCK_RDM", SOCK_RDM); |
| #endif |
| |
| #ifdef SO_DEBUG |
| insint(d, "SO_DEBUG", SO_DEBUG); |
| #endif |
| #ifdef SO_ACCEPTCONN |
| insint(d, "SO_ACCEPTCONN", SO_ACCEPTCONN); |
| #endif |
| #ifdef SO_REUSEADDR |
| insint(d, "SO_REUSEADDR", SO_REUSEADDR); |
| #endif |
| #ifdef SO_KEEPALIVE |
| insint(d, "SO_KEEPALIVE", SO_KEEPALIVE); |
| #endif |
| #ifdef SO_DONTROUTE |
| insint(d, "SO_DONTROUTE", SO_DONTROUTE); |
| #endif |
| #ifdef SO_BROADCAST |
| insint(d, "SO_BROADCAST", SO_BROADCAST); |
| #endif |
| #ifdef SO_USELOOPBACK |
| insint(d, "SO_USELOOPBACK", SO_USELOOPBACK); |
| #endif |
| #ifdef SO_LINGER |
| insint(d, "SO_LINGER", SO_LINGER); |
| #endif |
| #ifdef SO_OOBINLINE |
| insint(d, "SO_OOBINLINE", SO_OOBINLINE); |
| #endif |
| #ifdef SO_REUSEPORT |
| insint(d, "SO_REUSEPORT", SO_REUSEPORT); |
| #endif |
| |
| #ifdef SO_SNDBUF |
| insint(d, "SO_SNDBUF", SO_SNDBUF); |
| #endif |
| #ifdef SO_RCVBUF |
| insint(d, "SO_RCVBUF", SO_RCVBUF); |
| #endif |
| #ifdef SO_SNDLOWAT |
| insint(d, "SO_SNDLOWAT", SO_SNDLOWAT); |
| #endif |
| #ifdef SO_RCVLOWAT |
| insint(d, "SO_RCVLOWAT", SO_RCVLOWAT); |
| #endif |
| #ifdef SO_SNDTIMEO |
| insint(d, "SO_SNDTIMEO", SO_SNDTIMEO); |
| #endif |
| #ifdef SO_RCVTIMEO |
| insint(d, "SO_RCVTIMEO", SO_RCVTIMEO); |
| #endif |
| #ifdef SO_ERROR |
| insint(d, "SO_ERROR", SO_ERROR); |
| #endif |
| #ifdef SO_TYPE |
| insint(d, "SO_TYPE", SO_TYPE); |
| #endif |
| |
| /* Maximum number of connections for "listen" */ |
| #ifdef SOMAXCONN |
| insint(d, "SOMAXCONN", SOMAXCONN); |
| #else |
| insint(d, "SOMAXCONN", 5); /* Common value */ |
| #endif |
| |
| /* Flags for send, recv */ |
| #ifdef MSG_OOB |
| insint(d, "MSG_OOB", MSG_OOB); |
| #endif |
| #ifdef MSG_PEEK |
| insint(d, "MSG_PEEK", MSG_PEEK); |
| #endif |
| #ifdef MSG_DONTROUTE |
| insint(d, "MSG_DONTROUTE", MSG_DONTROUTE); |
| #endif |
| #ifdef MSG_EOR |
| insint(d, "MSG_EOR", MSG_EOR); |
| #endif |
| #ifdef MSG_TRUNC |
| insint(d, "MSG_TRUNC", MSG_TRUNC); |
| #endif |
| #ifdef MSG_CTRUNC |
| insint(d, "MSG_CTRUNC", MSG_CTRUNC); |
| #endif |
| #ifdef MSG_WAITALL |
| insint(d, "MSG_WAITALL", MSG_WAITALL); |
| #endif |
| #ifdef MSG_BTAG |
| insint(d, "MSG_BTAG", MSG_BTAG); |
| #endif |
| #ifdef MSG_ETAG |
| insint(d, "MSG_ETAG", MSG_ETAG); |
| #endif |
| |
| /* Protocol level and numbers, usable for [gs]etsockopt */ |
| /* Sigh -- some systems (e.g. Linux) use enums for these. */ |
| #ifdef SOL_SOCKET |
| insint(d, "SOL_SOCKET", SOL_SOCKET); |
| #endif |
| #ifdef IPPROTO_IP |
| insint(d, "IPPROTO_IP", IPPROTO_IP); |
| #else |
| insint(d, "IPPROTO_IP", 0); |
| #endif |
| #ifdef IPPROTO_ICMP |
| insint(d, "IPPROTO_ICMP", IPPROTO_ICMP); |
| #else |
| insint(d, "IPPROTO_ICMP", 1); |
| #endif |
| #ifdef IPPROTO_IGMP |
| insint(d, "IPPROTO_IGMP", IPPROTO_IGMP); |
| #endif |
| #ifdef IPPROTO_GGP |
| insint(d, "IPPROTO_GGP", IPPROTO_GGP); |
| #endif |
| #ifdef IPPROTO_TCP |
| insint(d, "IPPROTO_TCP", IPPROTO_TCP); |
| #else |
| insint(d, "IPPROTO_TCP", 6); |
| #endif |
| #ifdef IPPROTO_EGP |
| insint(d, "IPPROTO_EGP", IPPROTO_EGP); |
| #endif |
| #ifdef IPPROTO_PUP |
| insint(d, "IPPROTO_PUP", IPPROTO_PUP); |
| #endif |
| #ifdef IPPROTO_UDP |
| insint(d, "IPPROTO_UDP", IPPROTO_UDP); |
| #else |
| insint(d, "IPPROTO_UDP", 17); |
| #endif |
| #ifdef IPPROTO_IDP |
| insint(d, "IPPROTO_IDP", IPPROTO_IDP); |
| #endif |
| #ifdef IPPROTO_HELLO |
| insint(d, "IPPROTO_HELLO", IPPROTO_HELLO); |
| #endif |
| #ifdef IPPROTO_ND |
| insint(d, "IPPROTO_ND", IPPROTO_ND); |
| #endif |
| #ifdef IPPROTO_TP |
| insint(d, "IPPROTO_TP", IPPROTO_TP); |
| #endif |
| #ifdef IPPROTO_XTP |
| insint(d, "IPPROTO_XTP", IPPROTO_XTP); |
| #endif |
| #ifdef IPPROTO_EON |
| insint(d, "IPPROTO_EON", IPPROTO_EON); |
| #endif |
| #ifdef IPPROTO_BIP |
| insint(d, "IPPROTO_BIP", IPPROTO_BIP); |
| #endif |
| /**/ |
| #ifdef IPPROTO_RAW |
| insint(d, "IPPROTO_RAW", IPPROTO_RAW); |
| #else |
| insint(d, "IPPROTO_RAW", 255); |
| #endif |
| #ifdef IPPROTO_MAX |
| insint(d, "IPPROTO_MAX", IPPROTO_MAX); |
| #endif |
| |
| /* Some port configuration */ |
| #ifdef IPPORT_RESERVED |
| insint(d, "IPPORT_RESERVED", IPPORT_RESERVED); |
| #else |
| insint(d, "IPPORT_RESERVED", 1024); |
| #endif |
| #ifdef IPPORT_USERRESERVED |
| insint(d, "IPPORT_USERRESERVED", IPPORT_USERRESERVED); |
| #else |
| insint(d, "IPPORT_USERRESERVED", 5000); |
| #endif |
| |
| /* Some reserved IP v.4 addresses */ |
| #ifdef INADDR_ANY |
| insint(d, "INADDR_ANY", INADDR_ANY); |
| #else |
| insint(d, "INADDR_ANY", 0x00000000); |
| #endif |
| #ifdef INADDR_BROADCAST |
| insint(d, "INADDR_BROADCAST", INADDR_BROADCAST); |
| #else |
| insint(d, "INADDR_BROADCAST", 0xffffffff); |
| #endif |
| #ifdef INADDR_LOOPBACK |
| insint(d, "INADDR_LOOPBACK", INADDR_LOOPBACK); |
| #else |
| insint(d, "INADDR_LOOPBACK", 0x7F000001); |
| #endif |
| #ifdef INADDR_UNSPEC_GROUP |
| insint(d, "INADDR_UNSPEC_GROUP", INADDR_UNSPEC_GROUP); |
| #else |
| insint(d, "INADDR_UNSPEC_GROUP", 0xe0000000); |
| #endif |
| #ifdef INADDR_ALLHOSTS_GROUP |
| insint(d, "INADDR_ALLHOSTS_GROUP", INADDR_ALLHOSTS_GROUP); |
| #else |
| insint(d, "INADDR_ALLHOSTS_GROUP", 0xe0000001); |
| #endif |
| #ifdef INADDR_MAX_LOCAL_GROUP |
| insint(d, "INADDR_MAX_LOCAL_GROUP", INADDR_MAX_LOCAL_GROUP); |
| #else |
| insint(d, "INADDR_MAX_LOCAL_GROUP", 0xe00000ff); |
| #endif |
| #ifdef INADDR_NONE |
| insint(d, "INADDR_NONE", INADDR_NONE); |
| #else |
| insint(d, "INADDR_NONE", 0xffffffff); |
| #endif |
| |
| /* IP [gs]etsockopt options */ |
| #ifdef IP_OPTIONS |
| insint(d, "IP_OPTIONS", IP_OPTIONS); |
| #endif |
| #ifdef IP_HDRINCL |
| insint(d, "IP_HDRINCL", IP_HDRINCL); |
| #endif |
| #ifdef IP_TOS |
| insint(d, "IP_TOS", IP_TOS); |
| #endif |
| #ifdef IP_TTL |
| insint(d, "IP_TTL", IP_TTL); |
| #endif |
| #ifdef IP_RECVOPTS |
| insint(d, "IP_RECVOPTS", IP_RECVOPTS); |
| #endif |
| #ifdef IP_RECVRETOPTS |
| insint(d, "IP_RECVRETOPTS", IP_RECVRETOPTS); |
| #endif |
| #ifdef IP_RECVDSTADDR |
| insint(d, "IP_RECVDSTADDR", IP_RECVDSTADDR); |
| #endif |
| #ifdef IP_RETOPTS |
| insint(d, "IP_RETOPTS", IP_RETOPTS); |
| #endif |
| #ifdef IP_MULTICAST_IF |
| insint(d, "IP_MULTICAST_IF", IP_MULTICAST_IF); |
| #endif |
| #ifdef IP_MULTICAST_TTL |
| insint(d, "IP_MULTICAST_TTL", IP_MULTICAST_TTL); |
| #endif |
| #ifdef IP_MULTICAST_LOOP |
| insint(d, "IP_MULTICAST_LOOP", IP_MULTICAST_LOOP); |
| #endif |
| #ifdef IP_ADD_MEMBERSHIP |
| insint(d, "IP_ADD_MEMBERSHIP", IP_ADD_MEMBERSHIP); |
| #endif |
| #ifdef IP_DROP_MEMBERSHIP |
| insint(d, "IP_DROP_MEMBERSHIP", IP_DROP_MEMBERSHIP); |
| #endif |
| |
| /* Initialize gethostbyname lock */ |
| #if defined(WITH_THREAD) && !defined(HAVE_GETHOSTBYNAME_R) && !defined(MS_WINDOWS) |
| gethostbyname_lock = allocate_lock(); |
| #endif |
| } |