blob: 88050d58fdc1b76bb7c077c76f40ed12ab7ba988 [file] [log] [blame]
#! /usr/bin/env ksh
# This script may be invoked by naming it directly or via a shell alias,
# but NOT through a symbolic link. Perhaps a future version will allow
# the use of a symbolic link.
#
# Using a symbolic link will cause the script to not be able to locate
# its support files.
MYDIR=`dirname $0`
WORKDIR=`pwd`
cd $MYDIR
MYDIR=`pwd`
cd ..
TOPDIR=`pwd`
cd $WORKDIR
# DEFAULT_FORMAT must be upper case...
DEFAULT_FORMAT=PDF
USE_DEFAULT_FORMAT=true
DISCARD_TEMPS=true
ICONSERVER=''
TEMPBASE=mkhowto-$LOGNAME-$$
L2H_INIT_FILE=$TOPDIR/perl/l2hinit.perl
L2H_AUX_INIT_FILE=/usr/tmp/$TEMPBASE.perl
LOGFILE=/usr/tmp/$TEMPBASE.how
LOGGING=''
usage() {
MYNAME=`basename $0`
cat <<EOF
usage: $MYNAME [options...] file ...
Options specifying formats to build:
--html HyperText Markup Language
--pdf Portable Document Format (default)
--ps PostScript
--dvi "DeVice Indepentent" format from TeX
--text ASCII text (requires lynx)
More than one output format may be specified, or --all.
HTML options:
--address, -a Specify an address for page footers.
--link Specify the number of levels to include on each page.
--split, -s Specify a section level for page splitting, default: $MAX_SPLIT_DEPTH.
--iconserver, -i Specify location of icons (default: ../).
Other options:
--a4 Format for A4 paper.
--letter Format for US letter paper (the default).
--help, -H Show this text.
--logging, -l Log stdout and stderr to a file (*.how).
--debugging, -D Echo commands as they are executed.
--keep, -k Keep temporary files around.
--quiet, -q Do not print command output to stdout.
(stderr is also lost, sorry; see *.how for errors)
EOF
if [ "$2" ] ; then
echo "$2"
echo
fi
exit $1
}
# These are LaTeX2HTML controls; they reflect l2h variables of the same name.
# The values here are the defaults after modification by perl/l2hinit.perl.
#
ADDRESS=''
MAX_LINK_DEPTH=3
MAX_SPLIT_DEPTH=6
build_html() {
TEXFILE=`kpsewhich $1.tex`
TEXFILE="${TEXFILE#./}"
BUILDDIR=${2:-$1}
latex2html \
-init_file $L2H_INIT_FILE \
-init_file $L2H_AUX_INIT_FILE \
-dir $BUILDDIR $TEXFILE || exit $?
if [ "$MAX_SPLIT_DEPTH" -ne 1 ] ; then
(cd $BUILDDIR; $MYDIR/node2label.pl *.html) || exit $?
fi
}
use_latex() {
# two args: <file> <latextype>
MYFILE=$1
MYLATEX=$2
#
# We really have to do it three times to get all the page numbers right,
# since the length of the ToC makes a real difference.
#
$MYDIR/newind.py >$MYFILE.ind
$MYDIR/newind.py modindex >mod$MYFILE.ind
$MYLATEX $MYFILE || exit $?
if [ -f mod$MYFILE.idx ] ; then
makeindex mod$MYFILE.idx
fi
if [ -f $MYFILE.idx ] ; then
$MYDIR/fix_hack $MYFILE.idx
makeindex $MYFILE.idx
$MYDIR/indfix.py $MYFILE.ind
fi
if [ `grep -c '^\\\\bibdata{' $MYFILE.aux` -ne 0 ] ; then
USE_BIBTEX=true
bibtex $MYFILE
else
USE_BIBTEX=''
fi
if [ -f $MYFILE.syn ] ; then
# This hack is due to a bug with the module synopsis support that
# causes the last module synopsis to be written out twice in
# howto documents (not present for manuals). Repeated below.
uniq $MYFILE.syn >TEMP.syn && mv TEMP.syn $MYFILE.syn || exit $?
fi
$MYLATEX $MYFILE || exit $?
if [ -f mod$MYFILE.idx ] ; then
makeindex mod$MYFILE.idx
fi
if [ -f $MYFILE.idx ] ; then
$MYDIR/fix_hack $MYFILE.idx || exit $?
makeindex -s $TOPDIR/texinputs/python.ist $MYFILE.idx || exit $?
fi
if [ -f $MYFILE.toc -a $MYLATEX = pdflatex ] ; then
$MYDIR/toc2bkm.py -c section $MYFILE
fi
if [ -f $MYFILE.syn ] ; then
uniq $MYFILE.syn >TEMP.syn && mv TEMP.syn $MYFILE.syn || exit $?
fi
if [ "$USE_BIBTEX" ] ; then
bibtex $MYFILE
fi
$MYLATEX $MYFILE || exit $?
}
build_dvi() {
use_latex $1 latex
}
build_pdf() {
use_latex $1 pdflatex
}
build_ps() {
dvips -N0 -o $1.ps $1 || exit $?
}
build_text() {
lynx -nolist -dump $2/index.html >$1.txt
}
l2hoption() {
if [ "$2" ] ; then
VALUE=`echo "$2" | sed 's/[$"@]/\\\\&/g'`
echo "\$$1 = \"$VALUE\";" >>$L2H_AUX_INIT_FILE
fi
}
cleanup() {
rm -f $1.aux $1.log $1.out $1.toc $1.bkm $1.idx $1.ilg $1.ind $1.syn
rm -f mod$1.idx mod$1.ilg mod$1.ind
if [ ! "$BUILD_DVI" ] ; then
rm -f $1.dvi
fi
rm -rf $1.temp-html
rm -f $1/IMG* $1/*.pl $1/WARNINGS $1/index.dat $1/modindex.dat
# bibtex stuff
rm -f $1.bbl $1.blg
}
parse_option() {
# When using a long option with a parameter separated by '=',
# generalize the parsing of the two:
OPTION="$1"
unset VALUE
STUFF=`echo "$1" | grep '^--[-a-zA-Z0-9]*='`
if [ "$STUFF" ] ; then
# This leaves OPTION=--option= and VALUE=value
OPTION=`echo "$STUFF" | sed 's/^\(--[-a-zA-Z0-9]*=\)\(.*\)$/\1/'`
VALUE=`echo "$STUFF" | sed 's/^\(--[-a-zA-Z0-9]*=\)\(.*\)$/\2/'`
fi
}
# figure out what our targets are:
while [ "$1" ] ; do
parse_option "$1"
case "$OPTION" in
--all|--al)
BUILD_PDF=true
BUILD_PS=true
BUILD_DVI=true
BUILD_HTML=true
BUILD_TEXT=true
USE_DEFAULT_FORMAT=false
shift 1
;;
--pdf|--pd)
BUILD_PDF=true
USE_DEFAULT_FORMAT=false
shift 1
;;
--ps|--postscript|--postscrip|--postscri|--postscr|--postsc|--posts|--post|--pos|--po)
BUILD_PS=true
USE_DEFAULT_FORMAT=false
shift 1
;;
--dvi|--dv|--d)
BUILD_DVI=true
USE_DEFAULT_FORMAT=false
shift 1
;;
--html|--htm|--ht)
BUILD_HTML=true
USE_DEFAULT_FORMAT=false
shift 1
;;
--text|--tex|--te|--t)
BUILD_TEXT=true
USE_DEFAULT_FORMAT=false
shift 1
;;
-H|--help|--hel|--he)
usage 0
;;
-i|--iconserver|--iconserve|--iconserv|--iconser|--iconse|--icons|--icon|--ico|--ic|--i)
ICONSERVER="$2"
shift 2
;;
--iconserver=*|--iconserve=*|--iconserv=*|--iconser=*|--iconse=*|--icons=*|--icon=*|--ico=*|--ic=*|--i=*)
ICONSERVER="$VALUE"
shift 1
;;
-a|--address|--addres|--addre|-addr|--add|--ad)
ADDRESS="$2"
shift 2
;;
--address=*|--addres=*|--addre=*|-addr=*|--add=*|--ad=*)
ADDRESS="$VALUE"
shift 1
;;
--a4)
TEXINPUTS=$TOPDIR/paper-a4:$TEXINPUTS
shift 1
;;
--letter|--lette|--lett|--let|--le)
shift 1
;;
--link|--lin|--li)
LINK="$2"
shift 2
;;
--link=*|--lin=*|--li=*)
LINK="$VALUE"
shift 1
;;
-s|--split|--spli|--spl|--sp|--s)
MAX_SPLIT_DEPTH="$2"
shift 2
;;
--split=|--spli=|--spl=|--sp=|--s=)
MAX_SPLIT_DEPTH="$VALUE"
shift 1
;;
-l|--logging|--loggin|--loggi|--logg|--log|--lo)
LOGGING=true
shift 1
;;
-D|--debugging|--debuggin|--debuggi|--debugg|--debug|--debu|--deb|--de)
DEBUGGING=true
shift 1
;;
-k|--keep|--kee|--ke|--k)
DISCARD_TEMPS=''
shift 1
;;
-q|--quiet|--quie|--qui|--qu|--q)
QUIET=true
shift 1
;;
--)
shift 1
break
;;
-*)
usage 2 "Unknown option: ${VALUE%=}"
;;
*)
break;;
esac
done
if [ $# = 0 ] ; then
# check for a single .tex file in .
COUNT=`ls -1 *.tex | wc -l | sed 's/[ ]//g'`
if [ "$COUNT" -eq 1 ] ; then
set -- `ls -1 *.tex`
elif [ "$COUNT" -gt 1 ] ; then
usage 2 "Could not deduce which file(s) to process as HOWTO documents."
else
usage 2 "No file to process."
fi
fi
if [ $USE_DEFAULT_FORMAT = true ] ; then
eval "BUILD_$DEFAULT_FORMAT=true"
fi
if [ "$QUIET" ] ; then
exec >/dev/null
fi
if [ "$DEBUGGING" ] ; then
set -x
fi
echo '# auxillary init file for latex2html' >$L2H_AUX_INIT_FILE
echo '# generated by mkhowto.sh -- do not edit' >>$L2H_AUX_INIT_FILE
if [ "$ICONSERVER" ] ; then
ICONSERVER="${ICONSERVER%/}"
fi
l2hoption ICONSERVER "$ICONSERVER"
l2hoption ADDRESS "$ADDRESS"
l2hoption MAX_LINK_DEPTH "$MAX_LINK_DEPTH"
l2hoption MAX_SPLIT_DEPTH "$MAX_SPLIT_DEPTH"
echo '1;' >>$L2H_AUX_INIT_FILE
for FILE in $@ ; do
FILEDIR=`dirname $FILE`
FILE=`basename $FILE .tex`
#
# Put the directory the .tex file is in is also the first directory in
# TEXINPUTS, to allow files there to override files in the common area.
#
TEXINPUTS=$FILEDIR:$TOPDIR/texinputs:$TEXINPUTS
export TEXINPUTS
#
if [ "$BUILD_DVI" -o "$BUILD_PS" ] ; then
build_dvi $FILE 2>&1 | tee -a $LOGFILE
HAVE_TEMPS=true
fi
if [ "$BUILD_PDF" ] ; then
build_pdf $FILE 2>&1 | tee -a $LOGFILE
HAVE_TEMPS=true
fi
if [ "$BUILD_PS" ] ; then
build_ps $FILE 2>&1 | tee -a $LOGFILE
fi
if [ "$BUILD_HTML" ] ; then
if [ ! "$HAVE_TEMPS" ] ; then
# need to get aux file
build_dvi $FILE 2>&1 | tee -a $LOGFILE
HAVE_TEMPS=true
fi
build_html $FILE $FILE 2>&1 | tee -a $LOGFILE
if [ "$ICONSERVER" = "." ] ; then
cp $TOPDIR/icons/*.gif $FILE/
fi
fi
if [ "$BUILD_TEXT" ] ; then
if [ ! "$HAVE_TEMPS" ] ; then
# need to get aux file
build_dvi $FILE 2>&1 | tee -a $LOGFILE
HAVE_TEMPS=true
fi
# this is why building text really has to be last:
if [ "$MAX_SPLIT_DEPTH" -ne 1 ] ; then
echo '# re-hack this file for --text:' >>$L2H_AUX_INIT_FILE
l2hoption MAX_SPLIT_DEPTH 1
echo '1;' >>$L2H_AUX_INIT_FILE
TEMPDIR=$FILE.temp-html
build_html $FILE $TEMPDIR 2>&1 | tee -a $LOGFILE
else
TEMPDIR=$FILE
fi
build_text $FILE $TEMPDIR 2>&1 | tee -a $LOGFILE
fi
if [ "$DISCARD_TEMPS" ] ; then
cleanup $FILE 2>&1 | tee -a $LOGFILE
fi
# keep the logfile around
if [ "$LOGGING" ] ; then
cp $LOGFILE $FILE.how
fi
rm -f $LOGFILE
done
if [ ! "$DEBUGGING" ] ; then
rm -f $L2H_AUX_INIT_FILE
fi