diff --git a/Misc/NEWS b/Misc/NEWS
index 15d6690..6c5499c 100644
--- a/Misc/NEWS
+++ b/Misc/NEWS
@@ -786,6 +786,10 @@
 Extension Modules
 -----------------
 
+- Issue #17192: Update the ctypes module's libffi to v3.0.13.  This
+  specifically addresses a stack misalignment issue on x86 and issues on
+  some more recent platforms.
+
 - Issue #12268: The io module file object write methods no longer abort early
   when a write system calls is interrupted (EINTR).
 
diff --git a/Modules/_ctypes/libffi.diff b/Modules/_ctypes/libffi.diff
index 7afa0ed..828a277 100644
--- a/Modules/_ctypes/libffi.diff
+++ b/Modules/_ctypes/libffi.diff
@@ -1,24 +1,26 @@
-diff -urN libffi.orig/configure libffi/configure
---- libffi.orig/configure	2010-03-19 18:29:54.588499862 +0100
-+++ libffi/configure	2010-03-19 18:32:09.113499479 +0100
-@@ -11228,6 +11228,9 @@
-   i?86-*-solaris2.1[0-9]*)
- 	TARGET=X86_64; TARGETDIR=x86
+diff -r -N -u libffi.orig/autom4te.cache/output.0 libffi/autom4te.cache/output.0
+diff -r -N -u libffi.orig/configure libffi/configure
+--- libffi.orig/configure	2013-03-17 15:37:50.000000000 -0700
++++ libffi/configure	2013-03-18 15:11:39.611575163 -0700
+@@ -13368,6 +13368,10 @@
+ 	fi
  	;;
+ 
 +  i*86-*-nto-qnx*)
 +        TARGET=X86; TARGETDIR=x86
 +        ;;
-   i?86-*-*)
- 	TARGET=X86; TARGETDIR=x86
++
+   x86_64-*-darwin*)
+ 	TARGET=X86_DARWIN; TARGETDIR=x86
  	;;
-@@ -11245,12 +11248,12 @@
+@@ -13426,12 +13430,12 @@
  	;;
  
-   mips-sgi-irix5.* | mips-sgi-irix6.*)
+   mips-sgi-irix5.* | mips-sgi-irix6.* | mips*-*-rtems*)
 -	TARGET=MIPS; TARGETDIR=mips
 +	TARGET=MIPS_IRIX; TARGETDIR=mips
  	;;
-   mips*-*-linux*)
+   mips*-*-linux* | mips*-*-openbsd*)
  	# Support 128-bit long double for NewABI.
  	HAVE_LONG_DOUBLE='defined(__mips64)'
 -	TARGET=MIPS; TARGETDIR=mips
@@ -26,8 +28,8 @@
  	;;
  
    powerpc*-*-linux* | powerpc-*-sysv*)
-@@ -11307,7 +11310,7 @@
-   as_fn_error "\"libffi has not been ported to $host.\"" "$LINENO" 5
+@@ -13491,7 +13495,7 @@
+   as_fn_error $? "\"libffi has not been ported to $host.\"" "$LINENO" 5
  fi
  
 - if test x$TARGET = xMIPS; then
@@ -35,7 +37,7 @@
    MIPS_TRUE=
    MIPS_FALSE='#'
  else
-@@ -12422,6 +12425,12 @@
+@@ -14862,6 +14866,12 @@
  ac_config_files="$ac_config_files include/Makefile include/ffi.h Makefile testsuite/Makefile man/Makefile libffi.pc"
  
  
@@ -48,44 +50,45 @@
  cat >confcache <<\_ACEOF
  # This file is a shell script that caches the results of configure
  # tests run on this system so they can be shared between configure
-@@ -13521,6 +13530,8 @@
+@@ -16047,6 +16057,8 @@
      "testsuite/Makefile") CONFIG_FILES="$CONFIG_FILES testsuite/Makefile" ;;
      "man/Makefile") CONFIG_FILES="$CONFIG_FILES man/Makefile" ;;
      "libffi.pc") CONFIG_FILES="$CONFIG_FILES libffi.pc" ;;
 +    "include/ffi_common.h") CONFIG_LINKS="$CONFIG_LINKS include/ffi_common.h:include/ffi_common.h" ;;
 +    "fficonfig.py") CONFIG_FILES="$CONFIG_FILES fficonfig.py" ;;
  
-   *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+   *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
    esac
-diff -urN libffi.orig/configure.ac libffi/configure.ac
---- libffi.orig/configure.ac	2010-03-19 18:27:44.988498585 +0100
-+++ libffi/configure.ac	2010-03-19 18:31:29.252505178 +0100
+diff -r -N -u libffi.orig/configure.ac libffi/configure.ac
+--- libffi.orig/configure.ac	2013-03-17 15:37:50.000000000 -0700
++++ libffi/configure.ac	2013-03-18 15:11:11.392989136 -0700
 @@ -1,4 +1,7 @@
  dnl Process this with autoconf to create configure
 +#
-+# file from libffi - slightly patched for ctypes
++# file from libffi - slightly patched for Python's ctypes
 +#
  
- AC_PREREQ(2.63)
+ AC_PREREQ(2.68)
  
-@@ -91,6 +94,9 @@
-   i?86-*-solaris2.1[[0-9]]*)
- 	TARGET=X86_64; TARGETDIR=x86
+@@ -146,6 +149,10 @@
+ 	fi	  
  	;;
+ 
 +  i*86-*-nto-qnx*) 
 +        TARGET=X86; TARGETDIR=x86
 +        ;;
-   i?86-*-*)
- 	TARGET=X86; TARGETDIR=x86
++
+   x86_64-*-darwin*)
+ 	TARGET=X86_DARWIN; TARGETDIR=x86
  	;;
-@@ -108,12 +114,12 @@
+@@ -204,12 +211,12 @@
  	;;
  
-   mips-sgi-irix5.* | mips-sgi-irix6.*)
+   mips-sgi-irix5.* | mips-sgi-irix6.* | mips*-*-rtems*)
 -	TARGET=MIPS; TARGETDIR=mips
 +	TARGET=MIPS_IRIX; TARGETDIR=mips
  	;;
-   mips*-*-linux*)
+   mips*-*-linux* | mips*-*-openbsd*)
  	# Support 128-bit long double for NewABI.
  	HAVE_LONG_DOUBLE='defined(__mips64)'
 -	TARGET=MIPS; TARGETDIR=mips
@@ -93,16 +96,16 @@
  	;;
  
    powerpc*-*-linux* | powerpc-*-sysv*)
-@@ -170,7 +176,7 @@
+@@ -269,7 +276,7 @@
    AC_MSG_ERROR(["libffi has not been ported to $host."])
  fi
  
 -AM_CONDITIONAL(MIPS, test x$TARGET = xMIPS)
 +AM_CONDITIONAL(MIPS,[expr x$TARGET : 'xMIPS' > /dev/null])
+ AM_CONDITIONAL(BFIN, test x$TARGET = xBFIN)
  AM_CONDITIONAL(SPARC, test x$TARGET = xSPARC)
  AM_CONDITIONAL(X86, test x$TARGET = xX86)
- AM_CONDITIONAL(X86_FREEBSD, test x$TARGET = xX86_FREEBSD)
-@@ -401,4 +407,8 @@
+@@ -567,4 +574,8 @@
  
  AC_CONFIG_FILES(include/Makefile include/ffi.h Makefile testsuite/Makefile man/Makefile libffi.pc)
  
diff --git a/Modules/_ctypes/libffi/.gitignore b/Modules/_ctypes/libffi/.gitignore
new file mode 100644
index 0000000..6af76ac
--- /dev/null
+++ b/Modules/_ctypes/libffi/.gitignore
@@ -0,0 +1,21 @@
+.libs
+.deps
+*.o
+*.lo
+.dirstamp
+*.la
+Makefile
+config.log
+config.status
+*~
+fficonfig.h
+include/ffi.h
+include/ffitarget.h
+libffi.pc
+libtool
+stamp-h1
+libffi*gz
+autom4te.cache
+libffi.xcodeproj/xcuserdata
+libffi.xcodeproj/project.xcworkspace
+ios/
diff --git a/Modules/_ctypes/libffi/.travis.yml b/Modules/_ctypes/libffi/.travis.yml
new file mode 100644
index 0000000..1a6a425
--- /dev/null
+++ b/Modules/_ctypes/libffi/.travis.yml
@@ -0,0 +1,8 @@
+language: c
+compiler:
+  - gcc
+  - clang
+
+before_script: sudo apt-get install dejagnu
+
+script: ./configure && make && make check
diff --git a/Modules/_ctypes/libffi/ChangeLog b/Modules/_ctypes/libffi/ChangeLog
index 00ba7ef..e0b057c 100644
--- a/Modules/_ctypes/libffi/ChangeLog
+++ b/Modules/_ctypes/libffi/ChangeLog
@@ -1,8 +1,1360 @@
+2013-03-17  Anthony Green  <green@moxielogic.com>
+
+	* README: Update for 3.0.13.
+	* configure.ac: Ditto.
+	* configure: Rebuilt.
+	* doc/*: Update version.
+
+2013-03-17  Dave Korn  <dave.korn.cygwin@gmail.com>
+
+	* src/closures.c (is_emutramp_enabled
+	[!FFI_MMAP_EXEC_EMUTRAMP_PAX]): Move default definition outside
+	enclosing #if scope.
+
+2013-03-17  Anthony Green  <green@moxielogic.com>
+
+	* configure.ac: Only modify toolexecdir in certain cases.
+	* configure: Rebuilt.
+
+2013-03-16  Gilles Talis  <gilles.talis@gmail.com>
+
+	* src/powerpc/ffi.c (ffi_prep_args_SYSV): Don't use
+	fparg_count,etc on __NO_FPRS__ targets.
+
+2013-03-16  Alan Hourihane  <alanh@fairlite.co.uk>
+
+	* src/m68k/sysv.S (epilogue): Don't use extb instruction on
+	m680000 machines.
+
+2013-03-16  Alex Gaynor <alex.gaynor@gmail.com>
+
+	* src/x86/ffi.c (ffi_prep_cif_machdep): Always align stack.
+
+2013-03-13  Markos Chandras <markos.chandras@imgtec.com>
+
+	* configure.ac: Add support for Imagination Technologies Meta.
+	* Makefile.am: Likewise.
+	* README: Add Imagination Technologies Meta details.
+	* src/metag/ffi.c: New.
+	* src/metag/ffitarget.h: Likewise.
+	* src/metag/sysv.S: Likewise.
+
+2013-02-24  Andreas Schwab  <schwab@linux-m68k.org>
+
+	* doc/libffi.texi (Structures): Fix missing category argument of
+	@deftp.
+
+2013-02-11  Anthony Green <green@moxielogic.com>
+
+	* configure.ac: Update release number to 3.0.12.
+	* configure: Rebuilt.
+	* README: Update release info.
+
+2013-02-10  Anthony Green <green@moxielogic.com>
+
+	* README: Add Moxie.
+	* src/moxie/ffi.c: Created.
+	* src/moxie/eabi.S: Created.
+	* src/moxie/ffitarget.h: Created.
+	* Makefile.am (nodist_libffi_la_SOURCES): Add Moxie.
+	* Makefile.in: Rebuilt.
+	* configure.ac: Add Moxie.
+	* configure: Rebuilt.
+	* testsuite/libffi.call/huge_struct.c: Disable format string
+	warnings for moxie*-*-elf tests.
+
+2013-02-10  Anthony Green <green@moxielogic.com>
+
+	* Makefile.am (LTLDFLAGS): Fix reference.
+	* Makefile.in: Rebuilt.
+
+2013-02-10  Anthony Green <green@moxielogic.com>
+
+	* README: Update supported platforms.  Update test results link.
+
+2013-02-09  Anthony Green <green@moxielogic.com>
+
+	* testsuite/libffi.call/negint.c: Remove forced -O2.
+	* testsuite/libffi.call/many2.c (foo): Remove GCCism.
+	* testsuite/libffi.call/ffitest.h: Add default PRIuPTR definition.
+
+	* src/sparc/v8.S (ffi_closure_v8): Import ancient ulonglong
+	closure return type fix developed by Martin v. Löwis for cpython
+	fork.
+
+2013-02-08  Andreas Tobler  <andreast@fgznet.ch>
+
+	* src/powerpc/ffi.c (ffi_prep_cif_machdep): Fix small struct
+	support.
+	* src/powerpc/sysv.S: Ditto.
+
+2013-02-08  Anthony Green <green@moxielogic.com>
+
+	* testsuite/libffi.call/cls_longdouble.c: Remove xfail for
+	arm*-*-*.
+
+2013-02-08  Anthony Green <green@moxielogic.com>
+
+	* src/sparc/ffi.c (ffi_prep_closure_loc): Fix cache flushing for GCC.
+
+2013-02-08  Matthias Klose  <doko@ubuntu.com>
+
+	* man/ffi_prep_cif.3: Clean up for debian linter.
+
+2013-02-08  Peter Bergner  <bergner@vnet.ibm.com>
+
+	* src/powerpc/ffi.c (ffi_prep_args_SYSV): Account for FP args pushed
+	on the stack.
+
+2013-02-08  Anthony Green <green@moxielogic.com>
+
+	* Makefile.am (EXTRA_DIST): Add missing files.
+	* testsuite/Makefile.am (EXTRA_DIST): Ditto.
+	* Makefile.in: Rebuilt.
+
+2013-02-08  Anthony Green <green@moxielogic.com>
+
+	* configure.ac: Move sparc asm config checks to within functions
+	for compatibility with sun tools.
+	* configure: Rebuilt.
+	* src/sparc/ffi.c (ffi_prep_closure_loc): Flush cache on v9
+	systems.
+	* src/sparc/v8.S (ffi_flush_icache): Implement a sparc v9 cache
+	flusher.
+
+2013-02-08  Nathan Rossi <nathan.rossi@xilinx.com>
+
+	* src/microblaze/ffi.c (ffi_closure_call_SYSV): Fix handling of
+	small big-endian structures.
+	(ffi_prep_args): Ditto.
+
+2013-02-07  Anthony Green <green@moxielogic.com>
+
+	* src/sparc/v8.S (ffi_call_v8): Fix typo from last patch
+	(effectively hiding ffi_call_v8).
+
+2013-02-07  Anthony Green <green@moxielogic.com>
+
+	* configure.ac: Update bug reporting address.
+	* configure.in: Rebuild.
+
+	* src/sparc/v8.S (ffi_flush_icache): Out-of-line cache flusher for
+	Sun compiler.
+	* src/sparc/ffi.c (ffi_call): Remove warning.
+	Call ffi_flush_icache for non-GCC builds.
+	(ffi_prep_closure_loc): Use ffi_flush_icache.
+
+	* Makefile.am (EXTRA_DIST): Add libtool-ldflags.
+	* Makefile.in: Rebuilt.
+	* libtool-ldflags: New file.
+
+2013-02-07  Daniel Schepler <dschepler@gmail.com>
+
+	* configure.ac: Correctly identify x32 systems as 64-bit.
+	* m4/libtool.m4: Remove libtool expr error.
+	* aclocal.m4, configure: Rebuilt.
+
+2013-02-07  Anthony Green <green@moxielogic.com>
+
+	* configure.ac: Fix GCC usage test.
+	* configure: Rebuilt.
+	* README: Mention LLVM/GCC x86_64 issue.
+	* testsuite/Makefile.in: Rebuilt.
+
+2013-02-07  Anthony Green <green@moxielogic.com>
+
+	* testsuite/libffi.call/cls_double_va.c (main): Replace // style
+	comments with /* */ for xlc compiler.
+	* testsuite/libffi.call/stret_large.c (main): Ditto.
+	* testsuite/libffi.call/stret_large2.c (main): Ditto.
+	* testsuite/libffi.call/nested_struct1.c (main): Ditto.
+	* testsuite/libffi.call/huge_struct.c (main): Ditto.
+	* testsuite/libffi.call/float_va.c (main): Ditto.
+	* testsuite/libffi.call/cls_struct_va1.c (main): Ditto.
+	* testsuite/libffi.call/cls_pointer_stack.c (main): Ditto.
+	* testsuite/libffi.call/cls_pointer.c (main): Ditto.
+	* testsuite/libffi.call/cls_longdouble_va.c (main): Ditto.
+
+2013-02-06  Anthony Green <green@moxielogic.com>
+
+	* man/ffi_prep_cif.3: Clean up for debian lintian checker.
+
+2013-02-06  Anthony Green <green@moxielogic.com>
+
+	* Makefile.am (pkgconfigdir): Add missing pkgconfig install bits.
+	* Makefile.in: Rebuild.
+
+2013-02-02  Mark H Weaver <mhw@netris.org>
+
+	* src/x86/ffi64.c (ffi_call): Sign-extend integer arguments passed
+	via general purpose registers.
+
+2013-01-21  Nathan Rossi <nathan.rossi@xilinx.com>
+
+	* README: Add MicroBlaze details.
+	* Makefile.am: Add MicroBlaze support.
+	* configure.ac: Likewise.
+	* src/microblaze/ffi.c: New.
+	* src/microblaze/ffitarget.h: Likewise.
+	* src/microblaze/sysv.S: Likewise.
+
+2013-01-21  Nathan Rossi <nathan.rossi@xilinx.com>
+	* testsuite/libffi.call/return_uc.c: Fixed issue.
+
+2013-01-21  Chris Zankel   <chris@zankel.net>
+
+	* README: Add Xtensa support.
+	* Makefile.am: Likewise.
+	* configure.ac: Likewise.
+	* Makefile.in Regenerate.
+	* configure: Likewise.
+	* src/prep_cif.c: Handle Xtensa.
+	* src/xtensa: New directory.
+	* src/xtensa/ffi.c: New file.
+	* src/xtensa/ffitarget.h: Ditto.
+	* src/xtensa/sysv.S: Ditto.
+
+2013-01-11  Anthony Green  <green@moxielogic.com>
+
+	* src/powerpc/ffi_darwin.c (ffi_prep_args): Replace // style
+	comments with /* */ for xlc compiler.
+	* src/powerpc/aix.S (ffi_call_AIX): Ditto.
+	* testsuite/libffi.call/ffitest.h (allocate_mmap): Delete
+	deprecated inline function.
+	* testsuite/libffi.special/ffitestcxx.h: Ditto.
+	* README: Add update for AIX support.
+
+2013-01-11  Anthony Green  <green@moxielogic.com>
+
+	* configure.ac: Robustify pc relative reloc check.
+	* m4/ax_cc_maxopt.m4: Don't -malign-double.  This is an ABI
+	changing option for 32-bit x86.
+	* aclocal.m4, configure: Rebuilt.
+	* README: Update supported target list.
+
+2013-01-10  Anthony Green  <green@moxielogic.com>
+
+	* README (tested): Add Compiler column to table.
+
+2013-01-10  Anthony Green  <green@moxielogic.com>
+
+	* src/x86/ffi64.c (struct register_args): Make sse array and array
+	of unions for sunpro compiler compatibility.
+
+2013-01-10  Anthony Green  <green@moxielogic.com>
+
+	* configure.ac: Test target platform size_t size.  Handle both 32
+	and 64-bit builds for x86_64-* and i?86-* targets (allowing for
+	CFLAG option to change default settings).
+	* configure, aclocal.m4: Rebuilt.
+
+2013-01-10  Anthony Green  <green@moxielogic.com>
+
+	* testsuite/libffi.special/special.exp: Only run exception
+	handling tests when using GNU compiler.
+
+	* m4/ax_compiler_vendor.m4: New file.
+	* configure.ac: Test for compiler vendor and don't use
+	AX_CFLAGS_WARN_ALL with the sun compiler.
+	* aclocal.m4, configure: Rebuilt.
+
+2013-01-10  Anthony Green  <green@moxielogic.com>
+
+	* include/ffi_common.h: Don't use GCCisms to define types when
+	building with the SUNPRO compiler.
+
+2013-01-10  Anthony Green  <green@moxielogic.com>
+
+	* configure.ac: Put local.exp in the right place.
+	* configure: Rebuilt.
+
+	* src/x86/ffi.c: Update comment about regparm function attributes.
+	* src/x86/sysv.S (ffi_closure_SYSV): The SUNPRO compiler requires
+	that all function arguments be passed on the stack (no regparm
+	support).
+
+2013-01-08  Anthony Green  <green@moxielogic.com>
+
+	* configure.ac: Generate local.exp.  This sets CC_FOR_TARGET
+	when we are using the vendor compiler.
+	* testsuite/Makefile.am (EXTRA_DEJAGNU_SITE_CONFIG): Point to
+	../local.exp.
+	* configure, testsuite/Makefile.in: Rebuilt.
+
+	* testsuite/libffi.call/call.exp: Run tests with different
+	options, depending on whether or not we are using gcc or the
+	vendor compiler.
+	* testsuite/lib/libffi.exp (libffi-init): Set using_gcc based on
+	whether or not we are building/testing with gcc.
+
+2013-01-08  Anthony Green  <green@moxielogic.com>
+
+	* configure.ac: Switch x86 solaris target to X86 by default.
+	* configure: Rebuilt.
+
+2013-01-08  Anthony Green  <green@moxielogic.com>
+
+	* configure.ac: Fix test for read-only eh_frame.
+	* configure: Rebuilt.
+
+2013-01-08  Anthony Green  <green@moxielogic.com>
+
+	* src/x86/sysv.S, src/x86/unix64.S: Only emit DWARF unwind info
+	when building with the GNU toolchain.
+	* testsuite/libffi.call/ffitest.h (CHECK): Fix for Solaris vendor
+	compiler.
+
+2013-01-07  Thorsten Glaser <tg@mirbsd.org>
+
+	* testsuite/libffi.call/cls_uchar_va.c,
+	testsuite/libffi.call/cls_ushort_va.c,
+	testsuite/libffi.call/va_1.c: Testsuite fixes.
+
+2013-01-07  Thorsten Glaser <tg@mirbsd.org>
+
+	* src/m68k/ffi.c (CIF_FLAGS_SINT8, CIF_FLAGS_SINT16): Define.
+	(ffi_prep_cif_machdep): Fix 8-bit and 16-bit signed calls.
+	* src/m68k/sysv.S (ffi_call_SYSV, ffi_closure_SYSV): Ditto.
+
+2013-01-04  Anthony Green  <green@moxielogic.com>
+
+	* Makefile.am (AM_CFLAGS): Don't automatically add -fexceptions
+	and -Wall.  This is set in the configure script after testing for
+	GCC.
+	* Makefile.in: Rebuilt.
+
+2013-01-02  rofl0r <https://github.com/rofl0r>
+
+	* src/powerpc/ffi.c (ffi_prep_cif_machdep): Fix build error on ppc
+	when long double == double.
+
+2013-01-02  Reini Urban  <rurban@x-ray.at>
+
+	* Makefile.am (libffi_la_LDFLAGS): Add -no-undefined to LDFLAGS
+	(required for shared libs on cygwin/mingw).
+	* Makefile.in: Rebuilt.
+
+2012-10-31  Alan Modra  <amodra@gmail.com>
+
+	* src/powerpc/linux64_closure.S: Add new ABI support.
+	* src/powerpc/linux64.S: Likewise.
+
+2012-10-30  Magnus Granberg  <zorry@gentoo.org>
+	    Pavel Labushev  <pavel.labushev@runbox.ru>
+
+	* configure.ac: New options pax_emutramp
+	* configure, fficonfig.h.in: Regenerated
+	* src/closures.c: New function emutramp_enabled_check() and
+	checks.
+
+2012-10-30  Frederick Cheung  <frederick.cheung@gmail.com>
+
+	* configure.ac: Enable FFI_MAP_EXEC_WRIT for Darwin 12 (mountain
+	lion) and future version.
+	* configure: Rebuild.
+
+2012-10-30  James Greenhalgh  <james.greenhalgh at arm.com>
+            Marcus Shawcroft  <marcus.shawcroft at arm.com>
+
+        * README: Add details of aarch64 port.
+        * src/aarch64/ffi.c: New.
+        * src/aarch64/ffitarget.h: Likewise.
+        * src/aarch64/sysv.S: Likewise.
+	* Makefile.am: Support aarch64.
+	* configure.ac: Support aarch64.
+	* Makefile.in, configure: Rebuilt.
+
+2012-10-30  James Greenhalgh  <james.greenhalgh at arm.com>
+            Marcus Shawcroft  <marcus.shawcroft at arm.com>
+
+        * testsuite/lib/libffi.exp: Add support for aarch64.
+        * testsuite/libffi.call/cls_struct_va1.c: New.
+        * testsuite/libffi.call/cls_uchar_va.c: Likewise.
+        * testsuite/libffi.call/cls_uint_va.c: Likewise.
+        * testsuite/libffi.call/cls_ulong_va.c: Likewise.
+        * testsuite/libffi.call/cls_ushort_va.c: Likewise.
+        * testsuite/libffi.call/nested_struct11.c: Likewise.
+        * testsuite/libffi.call/uninitialized.c: Likewise.
+        * testsuite/libffi.call/va_1.c: Likewise.
+        * testsuite/libffi.call/va_struct1.c: Likewise.
+        * testsuite/libffi.call/va_struct2.c: Likewise.
+        * testsuite/libffi.call/va_struct3.c: Likewise.
+
+2012-10-12  Walter Lee  <walt@tilera.com>
+
+        * Makefile.am: Add TILE-Gx/TILEPro support.
+        * configure.ac: Likewise.
+        * Makefile.in: Regenerate.
+        * configure: Likewise.
+        * src/prep_cif.c (ffi_prep_cif_core): Handle TILE-Gx/TILEPro.
+        * src/tile: New directory.
+        * src/tile/ffi.c: New file.
+        * src/tile/ffitarget.h: Ditto.
+        * src/tile/tile.S: Ditto.
+
+2012-10-12  Matthias Klose  <doko@ubuntu.com>
+
+	* generate-osx-source-and-headers.py: Normalize whitespace.
+
+2012-09-14  David Edelsohn  <dje.gcc@gmail.com>
+
+	* configure: Regenerated.
+
+2012-08-26  Andrew Pinski  <apinski@cavium.com>
+
+	PR libffi/53014
+	* src/mips/ffi.c (ffi_prep_closure_loc): Allow n32 with soft-float and n64 with
+	soft-float.
+
+2012-08-08  Uros Bizjak  <ubizjak@gmail.com>
+
+	* src/s390/ffi.c (ffi_prep_closure_loc): Don't ASSERT ABI test,
+	just return FFI_BAD_ABI when things are wrong.
+
+2012-07-18  H.J. Lu  <hongjiu.lu@intel.com>
+
+	PR libffi/53982
+	PR libffi/53973
+	* src/x86/ffitarget.h: Check __ILP32__ instead of __LP64__ for x32.
+	(FFI_SIZEOF_JAVA_RAW): Defined to 4 for x32.
+
+2012-05-16  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* configure: Regenerated.
+
+2012-05-05  Nicolas Lelong
+
+	* libffi.xcodeproj/project.pbxproj: Fixes.
+	* README: Update for iOS builds.
+
+2012-04-23  Alexandre Keunecke I. de Mendonca <alexandre.keunecke@gmail.com>
+
+	* configure.ac: Add Blackfin/sysv support
+	* Makefile.am: Add Blackfin/sysv support
+	* src/bfin/ffi.c:  Add Blackfin/sysv support
+	* src/bfin/ffitarget.h: Add Blackfin/sysv support
+
+2012-04-11  Anthony Green  <green@moxielogic.com>
+
+	* Makefile.am (EXTRA_DIST): Add new script.
+	* Makefile.in: Rebuilt.
+
+2012-04-11  Zachary Waldowski  <zwaldowski@gmail.com>
+
+	* generate-ios-source-and-headers.py,
+	libffi.xcodeproj/project.pbxproj: Support a Mac static library via
+	Xcode. Set iOS compatibility to 4.0.  Move iOS trampoline
+	generation into an Xcode "run script" phase.  Include both as
+	Xcode build scripts. Don't always regenerate config files.
+
+2012-04-10  Anthony Green  <green@moxielogic.com>
+
+	* src/powerpc/ffi_darwin.c (ffi_prep_args): Add missing semicolon.
+
+2012-04-06  Anthony Green  <green@moxielogic.com>
+
+	* Makefile.am (EXTRA_DIST): Add new iOS/xcode files.
+	* Makefile.in: Rebuilt.
+
+2012-04-06  Mike Lewis  <mikelikespie@gmail.com>
+
+	* generate-ios-source-and-headers.py: New file.
+	* libffi.xcodeproj/project.pbxproj: New file.
+	* README: Update instructions on building iOS binary.
+	* build-ios.sh: Delete.
+
+2012-04-06  Anthony Green  <green@moxielogic.com>
+
+	* src/x86/ffi64.c (UINT128): Define differently for Intel and GNU
+	compilers, then use it.
+
+2012-04-06  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* m4/libtool.m4 (_LT_ENABLE_LOCK): Support x32.
+
+2012-04-06  Anthony Green  <green@moxielogic.com>
+
+	* testsuite/Makefile.am (EXTRA_DIST): Add missing test cases.
+	* testsuite/Makefile.in: Rebuilt.
+
+2012-04-05  Zachary Waldowski  <zwaldowski@gmail.com>
+
+	* include/ffi.h.in: Add missing trampoline table fields.
+	* src/arm/sysv.S: Fix ENTRY definition, and wrap symbol references
+	in CNAME.
+	* src/x86/ffi.c: Wrap Windows specific code in ifdefs.
+
+2012-04-02  Peter Bergner  <bergner@vnet.ibm.com>
+
+	* src/powerpc/ffi.c (ffi_prep_args_SYSV): Declare double_tmp.
+	Silence casting pointer to integer of different size warning.
+	Delete goto to previously deleted label.
+	(ffi_call): Silence possibly undefined warning.
+	(ffi_closure_helper_SYSV): Declare variable type.
+
+2012-04-02  Peter Rosin  <peda@lysator.liu.se>
+
+	* src/x86/win32.S (ffi_call_win32): Sign/zero extend the return
+	value in the Intel version as is already done for the AT&T version.
+	(ffi_closure_SYSV): Likewise.
+	(ffi_closure_raw_SYSV): Likewise.
+	(ffi_closure_STDCALL): Likewise.
+
+2012-03-29  Peter Rosin  <peda@lysator.liu.se>
+
+	* src/x86/win32.S (ffi_closure_raw_THISCALL): Unify the frame
+	generation, fix the ENDP label and remove the surplus third arg
+	from the 'lea' insn.
+
+2012-03-29  Peter Rosin  <peda@lysator.liu.se>
+
+	* src/x86/win32.S (ffi_closure_raw_SYSV): Make the 'stubraw' label
+	visible outside the PROC, so that ffi_closure_raw_THISCALL can see
+	it.  Also instruct the assembler to add a frame to the function.
+
+2012-03-23  Peter Rosin  <peda@lysator.liu.se>
+
+	* Makefile.am (AM_CPPFLAGS): Add -DFFI_BUILDING.
+	* Makefile.in: Rebuilt.
+	* include/ffi.h.in [MSVC]: Add __declspec(dllimport) decorations
+	to all data exports, when compiling libffi clients using MSVC.
+
+2012-03-29  Peter Rosin  <peda@lysator.liu.se>
+
+	* src/x86/ffitarget.h (ffi_abi): Add new ABI FFI_MS_CDECL and
+	make it the default for MSVC.
+	(FFI_TYPE_MS_STRUCT): New structure return convention.
+	* src/x86/ffi.c (ffi_prep_cif_machdep): Tweak the structure
+	return convention for FFI_MS_CDECL to be FFI_TYPE_MS_STRUCT
+	instead of an ordinary FFI_TYPE_STRUCT.
+	(ffi_prep_args): Treat FFI_TYPE_MS_STRUCT as FFI_TYPE_STRUCT.
+	(ffi_call): Likewise.
+	(ffi_prep_incoming_args_SYSV): Likewise.
+	(ffi_raw_call): Likewise.
+	(ffi_prep_closure_loc): Treat FFI_MS_CDECL as FFI_SYSV.
+	* src/x86/win32.S (ffi_closure_SYSV): For FFI_TYPE_MS_STRUCT,
+	return a pointer to the result structure in eax and don't pop
+	that pointer from the stack, the caller takes care of it.
+	(ffi_call_win32): Treat FFI_TYPE_MS_STRUCT as FFI_TYPE_STRUCT.
+	(ffi_closure_raw_SYSV): Likewise.
+
+2012-03-22  Peter Rosin  <peda@lysator.liu.se>
+
+	* testsuite/libffi.call/closure_stdcall.c [MSVC]: Add inline
+	assembly version with Intel syntax.
+	* testsuite/libffi.call/closure_thiscall.c [MSVC]: Likewise.
+
+2012-03-23  Peter Rosin  <peda@lysator.liu.se>
+
+	* testsuite/libffi.call/ffitest.h: Provide abstration of
+	__attribute__((fastcall)) in the form of a __FASTCALL__
+	define.  Define it to __fastcall for MSVC.
+	* testsuite/libffi.call/fastthis1_win32.c: Use the above.
+	* testsuite/libffi.call/fastthis2_win32.c: Likewise.
+	* testsuite/libffi.call/fastthis3_win32.c: Likewise.
+	* testsuite/libffi.call/strlen2_win32.c: Likewise.
+	* testsuite/libffi.call/struct1_win32.c: Likewise.
+	* testsuite/libffi.call/struct2_win32.c: Likewise.
+
+2012-03-22  Peter Rosin  <peda@lysator.liu.se>
+
+	* src/x86/win32.S [MSVC] (ffi_closure_THISCALL): Remove the manual
+	frame on function entry, MASM adds one automatically.
+
+2012-03-22  Peter Rosin  <peda@lysator.liu.se>
+
+	* testsuite/libffi.call/ffitest.h [MSVC]: Add kludge for missing
+	bits in the MSVC headers.
+
+2012-03-22  Peter Rosin  <peda@lysator.liu.se>
+
+	* testsuite/libffi.call/cls_12byte.c: Adjust to the C89 style
+	with no declarations after statements.
+	* testsuite/libffi.call/cls_16byte.c: Likewise.
+	* testsuite/libffi.call/cls_18byte.c: Likewise.
+	* testsuite/libffi.call/cls_19byte.c: Likewise.
+	* testsuite/libffi.call/cls_1_1byte.c: Likewise.
+	* testsuite/libffi.call/cls_20byte.c: Likewise.
+	* testsuite/libffi.call/cls_20byte1.c: Likewise.
+	* testsuite/libffi.call/cls_24byte.c: Likewise.
+	* testsuite/libffi.call/cls_2byte.c: Likewise.
+	* testsuite/libffi.call/cls_3_1byte.c: Likewise.
+	* testsuite/libffi.call/cls_3byte1.c: Likewise.
+	* testsuite/libffi.call/cls_3byte2.c: Likewise.
+	* testsuite/libffi.call/cls_4_1byte.c: Likewise.
+	* testsuite/libffi.call/cls_4byte.c: Likewise.
+	* testsuite/libffi.call/cls_5_1_byte.c: Likewise.
+	* testsuite/libffi.call/cls_5byte.c: Likewise.
+	* testsuite/libffi.call/cls_64byte.c: Likewise.
+	* testsuite/libffi.call/cls_6_1_byte.c: Likewise.
+	* testsuite/libffi.call/cls_6byte.c: Likewise.
+	* testsuite/libffi.call/cls_7_1_byte.c: Likewise.
+	* testsuite/libffi.call/cls_7byte.c: Likewise.
+	* testsuite/libffi.call/cls_8byte.c: Likewise.
+	* testsuite/libffi.call/cls_9byte1.c: Likewise.
+	* testsuite/libffi.call/cls_9byte2.c: Likewise.
+	* testsuite/libffi.call/cls_align_double.c: Likewise.
+	* testsuite/libffi.call/cls_align_float.c: Likewise.
+	* testsuite/libffi.call/cls_align_longdouble.c: Likewise.
+	* testsuite/libffi.call/cls_align_longdouble_split.c: Likewise.
+	* testsuite/libffi.call/cls_align_longdouble_split2.c: Likewise.
+	* testsuite/libffi.call/cls_align_pointer.c: Likewise.
+	* testsuite/libffi.call/cls_align_sint16.c: Likewise.
+	* testsuite/libffi.call/cls_align_sint32.c: Likewise.
+	* testsuite/libffi.call/cls_align_sint64.c: Likewise.
+	* testsuite/libffi.call/cls_align_uint16.c: Likewise.
+	* testsuite/libffi.call/cls_align_uint32.c: Likewise.
+	* testsuite/libffi.call/cls_align_uint64.c: Likewise.
+	* testsuite/libffi.call/cls_dbls_struct.c: Likewise.
+	* testsuite/libffi.call/cls_pointer_stack.c: Likewise.
+	* testsuite/libffi.call/err_bad_typedef.c: Likewise.
+	* testsuite/libffi.call/huge_struct.c: Likewise.
+	* testsuite/libffi.call/nested_struct.c: Likewise.
+	* testsuite/libffi.call/nested_struct1.c: Likewise.
+	* testsuite/libffi.call/nested_struct10.c: Likewise.
+	* testsuite/libffi.call/nested_struct2.c: Likewise.
+	* testsuite/libffi.call/nested_struct3.c: Likewise.
+	* testsuite/libffi.call/nested_struct4.c: Likewise.
+	* testsuite/libffi.call/nested_struct5.c: Likewise.
+	* testsuite/libffi.call/nested_struct6.c: Likewise.
+	* testsuite/libffi.call/nested_struct7.c: Likewise.
+	* testsuite/libffi.call/nested_struct8.c: Likewise.
+	* testsuite/libffi.call/nested_struct9.c: Likewise.
+	* testsuite/libffi.call/stret_large.c: Likewise.
+	* testsuite/libffi.call/stret_large2.c: Likewise.
+	* testsuite/libffi.call/stret_medium.c: Likewise.
+	* testsuite/libffi.call/stret_medium2.c: Likewise.
+	* testsuite/libffi.call/struct1.c: Likewise.
+	* testsuite/libffi.call/struct1_win32.c: Likewise.
+	* testsuite/libffi.call/struct2.c: Likewise.
+	* testsuite/libffi.call/struct2_win32.c: Likewise.
+	* testsuite/libffi.call/struct3.c: Likewise.
+	* testsuite/libffi.call/struct4.c: Likewise.
+	* testsuite/libffi.call/struct5.c: Likewise.
+	* testsuite/libffi.call/struct6.c: Likewise.
+	* testsuite/libffi.call/struct7.c: Likewise.
+	* testsuite/libffi.call/struct8.c: Likewise.
+	* testsuite/libffi.call/struct9.c: Likewise.
+	* testsuite/libffi.call/testclosure.c: Likewise.
+
+2012-03-21  Peter Rosin	 <peda@lysator.liu.se>
+
+	* testsuite/libffi.call/float_va.c (float_va_fn): Use %f when
+	printing doubles (%lf is for long doubles).
+	(main): Likewise.
+
+2012-03-21  Peter Rosin  <peda@lysator.liu.se>
+
+	* testsuite/lib/target-libpath.exp [*-*-cygwin*, *-*-mingw*]
+	(set_ld_library_path_env_vars): Add the library search dir to PATH
+	(and save PATH for later).
+	(restore_ld_library_path_env_vars): Restore PATH.
+
+2012-03-21  Peter Rosin  <peda@lysator.liu.se>
+
+	* testsuite/lib/target-libpath.exp [*-*-cygwin*, *-*-mingw*]
+	(set_ld_library_path_env_vars): Add the library search dir to PATH
+	(and save PATH for later).
+	(restore_ld_library_path_env_vars): Restore PATH.
+
+2012-03-20  Peter Rosin  <peda@lysator.liu.se>
+
+	* testsuite/libffi.call/strlen2_win32.c (main): Remove bug.
+	* src/x86/win32.S [MSVC] (ffi_closure_SYSV): Make the 'stub' label
+	visible outside the PROC, so that ffi_closure_THISCALL can see it.
+
+2012-03-20  Peter Rosin  <peda@lysator.liu.se>
+
+	* testsuite/libffi.call/strlen2_win32.c (main): Remove bug.
+	* src/x86/win32.S [MSVC] (ffi_closure_SYSV): Make the 'stub' label
+	visible outside the PROC, so that ffi_closure_THISCALL can see it.
+
+2012-03-19  Alan Hourihane  <alanh@fairlite.co.uk>
+
+	* src/m68k/ffi.c: Add MINT support.
+	* src/m68k/sysv.S: Ditto.
+
+2012-03-06  Chung-Lin Tang  <cltang@codesourcery.com>
+
+	* src/arm/ffi.c (ffi_call): Add __ARM_EABI__ guard around call to
+	ffi_call_VFP().
+	(ffi_prep_closure_loc): Add __ARM_EABI__ guard around use of
+	ffi_closure_VFP.
+	* src/arm/sysv.S: Add __ARM_EABI__ guard around VFP code.
+
+2012-03-19  chennam  <csit@axway.com>
+
+	* src/powerpc/ffi_darwin.c (ffi_prep_closure_loc): Fix AIX closure
+	support.
+
+2012-03-13  Kaz Kojima  <kkojima@gcc.gnu.org>
+
+	* src/sh/ffi.c (ffi_prep_closure_loc): Don't ASSERT ABI test,
+	just return FFI_BAD_ABI when things are wrong.
+	* src/sh64/ffi.c (ffi_prep_closure_loc): Ditto.
+
+2012-03-09  David Edelsohn  <dje.gcc@gmail.com>
+
+	* src/powerpc/aix_closure.S (ffi_closure_ASM): Adjust for Darwin64
+	change to return value of ffi_closure_helper_DARWIN and load type
+	from return type.
+
+2012-03-03  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* src/x86/ffi64.c (ffi_call): Cast the return value to unsigned
+	long.
+	(ffi_prep_closure_loc): Cast to 64bit address in trampoline.
+	(ffi_closure_unix64_inner): Cast return pointer to unsigned long
+	first.
+
+	* src/x86/ffitarget.h (FFI_SIZEOF_ARG): Defined to 8 for x32.
+	(ffi_arg): Set to unsigned long long for x32.
+	(ffi_sarg): Set to long long for x32.
+
+2012-03-03  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* src/prep_cif.c (ffi_prep_cif_core): Properly check bad ABI.
+
+2012-03-03  Andoni Morales Alastruey  <ylatuya@gmail.com>
+
+	* configure.ac: Add -no-undefined for both 32- and 64-bit x86
+	windows-like hosts.
+	* configure: Rebuilt.
+
+2012-02-27  Mikael Pettersson  <mikpe@it.uu.se>
+
+	PR libffi/52223
+	* Makefile.am (FLAGS_TO_PASS): Define.
+	* Makefile.in: Regenerate.
+
+2012-02-23  Anthony Green  <green@moxielogic.com>
+
+	* src/*/ffitarget.h: Ensure that users never include ffitarget.h
+	directly.
+
+2012-02-23  Kai Tietz  <ktietz@redhat.com>
+
+	PR libffi/52221
+	* src/x86/ffi.c (ffi_closure_raw_THISCALL): New
+	prototype.
+	(ffi_prep_raw_closure_loc): Use ffi_closure_raw_THISCALL for
+	thiscall-convention.
+	(ffi_raw_call): Use ffi_prep_args_raw.
+	* src/x86/win32.S (ffi_closure_raw_THISCALL): Add
+	implementation for stub.
+
+2012-02-10  Kai Tietz  <ktietz@redhat.com>
+
+	* configure.ac (AM_LTLDFLAGS): Add -no-undefine for x64
+	windows target.
+	* configure: Regenerated.
+
+2012-02-08  Kai Tietz  <ktietz@redhat.com>
+
+	* src/prep_cif.c (ffi_prep_cif): Allow for X86_WIN32
+	also FFI_THISCALL.
+	* src/x86/ffi.c (ffi_closure_THISCALL): Add prototype.
+	(FFI_INIT_TRAMPOLINE_THISCALL): New trampoline code.
+	(ffi_prep_closure_loc): Add FFI_THISCALL support.
+	* src/x86/ffitarget.h (FFI_TRAMPOLINE_SIZE): Adjust size.
+	* src/x86/win32.S (ffi_closure_THISCALL): New closure code
+	for thiscall-calling convention.
+	* testsuite/libffi.call/closure_thiscall.c: New test.
+
+2012-01-28  Kai Tietz  <ktietz@redhat.com>
+
+	* src/libffi/src/x86/ffi.c (ffi_call_win32): Add new
+	argument to prototype for specify calling-convention.
+	(ffi_call): Add support for stdcall/thiscall convention.
+	(ffi_prep_args): Likewise.
+	(ffi_raw_call): Likewise.
+	* src/x86/ffitarget.h (ffi_abi): Add FFI_THISCALL and
+	FFI_FASTCALL.
+	* src/x86/win32.S (_ffi_call_win32): Add support for
+	fastcall/thiscall calling-convention calls.
+	* testsuite/libffi.call/fastthis1_win32.c: New test.
+	* testsuite/libffi.call/fastthis2_win32.c: New test.
+	* testsuite/libffi.call/fastthis3_win32.c: New test.
+	* testsuite/libffi.call/strlen2_win32.c: New test.
+	* testsuite/libffi.call/many2_win32.c: New test.
+	* testsuite/libffi.call/struct1_win32.c: New test.
+	* testsuite/libffi.call/struct2_win32.c: New test.
+
+2012-01-23  Uros Bizjak  <ubizjak@gmail.com>
+
+	* src/alpha/ffi.c (ffi_prep_closure_loc): Check for bad ABI.
+
+2012-01-23  Anthony Green  <green@moxielogic.com>
+	    Chris Young  <cdyoung@ntlworld.com>
+
+	* configure.ac: Add Amiga support.
+	* configure: Rebuilt.
+
+2012-01-23  Dmitry Nadezhin  <dmitry.nadezhin@gmail.com>
+
+	* include/ffi_common.h (LIKELY, UNLIKELY): Fix definitions.
+
+2012-01-23  Andreas Schwab  <schwab@linux-m68k.org>
+
+	* src/m68k/sysv.S (ffi_call_SYSV): Properly test for plain
+	mc68000.  Test for __HAVE_68881__ in addition to __MC68881__.
+
+2012-01-19  Jakub Jelinek  <jakub@redhat.com>
+
+	PR rtl-optimization/48496
+	* src/ia64/ffi.c (ffi_call): Fix up aliasing violations.
+
+2012-01-09  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>
+
+	* configure.ac (i?86-*-*): Set TARGET to X86_64.
+	* configure: Regenerate.
+
+2011-12-07  Andrew Pinski  <apinski@cavium.com>
+
+	PR libffi/50051
+	* src/mips/n32.S: Add ".set mips4".
+
+2011-11-21  Andreas Tobler  <andreast@fgznet.ch>
+
+	* configure: Regenerate.
+
+2011-11-12  David Gilbert <david.gilbert@linaro.org>
+
+	* doc/libffi.texi, include/ffi.h.in, include/ffi_common.h,
+	man/Makefile.am, man/ffi.3, man/ffi_prep_cif.3,
+	man/ffi_prep_cif_var.3, src/arm/ffi.c, src/arm/ffitarget.h,
+	src/cris/ffi.c, src/prep_cif.c,
+	testsuite/libffi.call/cls_double_va.c,
+	testsuite/libffi.call/cls_longdouble_va.c,
+	testsuite/libffi.call/float_va.c: Many changes to support variadic
+	function calls.
+
+2011-11-12  Kyle Moffett <Kyle.D.Moffett@boeing.com>
+
+	* src/powerpc/ffi.c, src/powerpc/ffitarget.h,
+	src/powerpc/ppc_closure.S, src/powerpc/sysv.S: Many changes for
+	softfloat powerpc variants.
+
+2011-11-12  Petr Salinger <Petr.Salinger@seznam.cz>
+
+	* configure.ac (FFI_EXEC_TRAMPOLINE_TABLE): Fix kfreebsd support.
+	* configure: Rebuilt.
+
+2011-11-12  Timothy Wall  <twall@users.sf.net>
+
+	* src/arm/ffi.c (ffi_prep_args, ffi_prep_incoming_args_SYSV): Max
+	alignment of 4 for wince on ARM.
+
+2011-11-12  Kyle Moffett <Kyle.D.Moffett@boeing.com>
+	    Anthony Green <green@moxielogic.com>
+
+	* src/ppc/sysv.S, src/ppc/ffi.c: Remove use of ppc string
+	instructions (not available on some cores, like the PPC440).
+
+2011-11-12  Kimura Wataru  <kimuraw@i.nifty.jp>
+
+	* m4/ax_enable_builddir: Change from string comparison to numeric
+	comparison for wc output.
+	* configure.ac: Enable FFI_MMAP_EXEC_WRIT for darwin11 aka Mac OS
+	X 10.7.
+	* configure: Rebuilt.
+
+2011-11-12  Anthony Green  <green@moxielogic.com>
+
+	* Makefile.am (AM_CCASFLAGS): Add -g option to build assembly
+	files with debug info.
+	* Makefile.in: Rebuilt.
+
+2011-11-12  Jasper Lievisse Adriaanse <jasper@openbsd.org>
+
+	* README: Update list of supported OpenBSD systems.
+
+2011-11-12  Anthony Green  <green@moxielogic.com>
+
+	* libtool-version: Update.
+	* Makefile.am (nodist_libffi_la_SOURCES): Add src/debug.c if
+	FFI_DEBUG.
+	(libffi_la_SOURCES): Remove src/debug.c
+	(EXTRA_DIST): Add src/debug.c
+	* Makefile.in: Rebuilt.
+	* README: Update for 3.0.11.
+
+2011-11-10  Richard Henderson  <rth@redhat.com>
+
+	* configure.ac (GCC_AS_CFI_PSEUDO_OP): Use it instead of inline check.
+	* configure, aclocal.m4: Rebuild.
+
+2011-09-04  Iain Sandoe  <iains@gcc.gnu.org>
+
+	PR libffi/49594
+	* src/powerpc/darwin_closure.S (stubs): Make the stub binding
+	helper reference track the architecture pointer size.
+
+2011-08-25  Andrew Haley  <aph@redhat.com>
+
+	* src/arm/ffi.c (FFI_INIT_TRAMPOLINE): Remove hard-coded assembly
+	instructions.
+	* src/arm/sysv.S (ffi_arm_trampoline): Put them here instead.
+
+2011-07-11  Andrew Haley  <aph@redhat.com>
+
+        * src/arm/ffi.c (FFI_INIT_TRAMPOLINE): Clear icache.
+
+2011-06-29  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>
+
+	* testsuite/libffi.call/cls_double_va.c: Move PR number to comment.
+	* testsuite/libffi.call/cls_longdouble_va.c: Likewise.
+
+2011-06-29  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>
+
+	PR libffi/46660
+	* testsuite/libffi.call/cls_double_va.c: xfail dg-output on
+	mips-sgi-irix6*.
+	* testsuite/libffi.call/cls_longdouble_va.c: Likewise.
+
+2011-06-14  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>
+
+	* testsuite/libffi.call/huge_struct.c (test_large_fn): Use PRIu8,
+	PRId8 instead of %hhu, %hhd.
+	* testsuite/libffi.call/ffitest.h [__alpha__ && __osf__] (PRId8,
+	PRIu8): Define.
+	[__sgi__] (PRId8, PRIu8): Define.
+
+2011-04-29  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>
+
+	* src/alpha/osf.S (UA_SI, FDE_ENCODING, FDE_ENCODE, FDE_ARANGE):
+	Define.
+	Use them to handle ELF vs. ECOFF differences.
+	[__osf__] (_GLOBAL__F_ffi_call_osf): Define.
+
+2011-03-30  Timothy Wall  <twall@users.sf.net>
+
+	* src/powerpc/darwin.S: Fix unknown FDE encoding.
+	* src/powerpc/darwin_closure.S: ditto.
+
+2011-02-25  Anthony Green  <green@moxielogic.com>
+
+	* src/powerpc/ffi.c (ffi_prep_closure_loc): Allow for more
+	32-bit ABIs.
+
+2011-02-15  Anthony Green  <green@moxielogic.com>
+
+	* m4/ax_cc_maxopt.m4: Don't -malign-double or use -ffast-math.
+	* configure: Rebuilt.
+
+2011-02-13  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* configure: Regenerate.
+
+2011-02-13  Anthony Green  <green@moxielogic.com>
+
+	* include/ffi_common.h (UNLIKELY, LIKELY): Define.
+	* src/x86/ffi64.c (UNLIKELY, LIKELY): Remove definition.
+	* src/prep_cif.c (UNLIKELY, LIKELY): Remove definition.
+
+	* src/prep_cif.c (initialize_aggregate): Convert assertion into
+	FFI_BAD_TYPEDEF return.  Initialize arg size and alignment to 0.
+
+	* src/pa/ffi.c (ffi_prep_closure_loc): Don't ASSERT ABI test,
+	just return FFI_BAD_ABI when things are wrong.
+	* src/arm/ffi.c (ffi_prep_closure_loc): Ditto.
+	* src/powerpc/ffi.c (ffi_prep_closure_loc): Ditto.
+	* src/mips/ffi.c (ffi_prep_closure_loc): Ditto.
+	* src/ia64/ffi.c (ffi_prep_closure_loc): Ditto.
+	* src/avr32/ffi.c (ffi_prep_closure_loc): Ditto.
+
+2011-02-11  Anthony Green  <green@moxielogic.com>
+
+	* src/sparc/ffi.c (ffi_prep_closure_loc): Don't ASSERT ABI test,
+	just return FFI_BAD_ABI when things are wrong.
+
+2012-02-11  Eric Botcazou  <ebotcazou@adacore.com>
+
+	* src/sparc/v9.S (STACKFRAME): Bump to 176.
+
+2011-02-09  Stuart Shelton  <srcshelton@gmail.com>
+
+	http://bugs.gentoo.org/show_bug.cgi?id=286911
+	* src/mips/ffitarget.h: Clean up error messages.
+	* src/java_raw_api.c (ffi_java_translate_args): Cast raw arg to
+	ffi_raw*.
+	* include/ffi.h.in: Add pragma for SGI compiler.
+
+2011-02-09  Anthony Green  <green@moxielogic.com>
+
+	* configure.ac: Add powerpc64-*-darwin* support.
+
+2011-02-09  Anthony Green <green@moxielogic.com>
+
+	* README: Mention Interix.
+
+2011-02-09  Jonathan Callen  <abcd@gentoo.org>
+
+	* configure.ac: Add Interix to win32/cygwin/mingw case.
+	* configure: Ditto.
+	* src/closures.c: Treat Interix like Cygwin, instead of as a
+	generic win32.
+
+2011-02-09  Anthony Green <green@moxielogic.com>
+
+	* testsuite/libffi.call/err_bad_typedef.c: Remove xfail.
+	* testsuite/libffi.call/err_bad_abi.c: Remove xfail.
+	* src/x86/ffi64.c (UNLIKELY, LIKELY): Define.
+	(ffi_prep_closure_loc): Check for bad ABI.
+	* src/prep_cif.c (UNLIKELY, LIKELY): Define.
+	(initialize_aggregate): Check for bad types.
+
+2011-02-09  Landon Fuller <landonf@plausible.coop>
+
+	* Makefile.am (EXTRA_DIST): Add build-ios.sh, src/arm/gentramp.sh,
+	src/arm/trampoline.S.
+	(nodist_libffi_la_SOURCES): Add src/arc/trampoline.S.
+	* configure.ac (FFI_EXEC_TRAMPOLINE_TABLE): Define.
+	* src/arm/ffi.c (ffi_trampoline_table)
+	(ffi_closure_trampoline_table_page, ffi_trampoline_table_entry)
+	(FFI_TRAMPOLINE_CODELOC_CONFIG, FFI_TRAMPOLINE_CONFIG_PAGE_OFFSET)
+	(FFI_TRAMPOLINE_COUNT, ffi_trampoline_lock, ffi_trampoline_tables)
+	(ffi_trampoline_table_alloc, ffi_closure_alloc, ffi_closure_free):
+	Define for FFI_EXEC_TRAMPOLINE_TABLE case (iOS).
+	(ffi_prep_closure_loc): Handl FFI_EXEC_TRAMPOLINE_TABLE case
+	separately.
+	* src/arm/sysv.S: Handle Apple iOS host.
+	* src/closures.c: Handle FFI_EXEC_TRAMPOLINE_TABLE case.
+	* build-ios.sh: New file.
+	* fficonfig.h.in, configure, Makefile.in: Rebuilt.
+	* README: Mention ARM iOS.
+
+2011-02-08  Oren Held  <orenhe@il.ibm.com>
+
+	* src/dlmalloc.c (_STRUCT_MALLINFO): Define in order to avoid
+	redefinition of mallinfo on HP-UX.
+
+2011-02-08  Ginn Chen  <ginn.chen@oracle.com>
+
+	* src/sparc/ffi.c (ffi_call): Make compatible with Solaris Studio
+	aggregate return ABI.  Flush cache.
+	(ffi_prep_closure_loc): Flush cache.
+
+2011-02-11  Anthony Green  <green@moxielogic.com>
+
+	From Tom Honermann <tom.honermann@oracle.com>:
+	* src/powerpc/aix.S (ffi_call_AIX): Support for xlc toolchain on
+	AIX.  Declare .ffi_prep_args.  Insert nops after branch
+	instructions so that the AIX linker can insert TOC reload
+	instructions.
+	* src/powerpc/aix_closure.S: Declare .ffi_closure_helper_DARWIN.
+
+2011-02-08  Ed  <ed@kdtc.net>
+
+	* src/powerpc/asm.h: Fix grammar nit in comment.
+
+2011-02-08  Uli Link  <ul.mcamafia@linkitup.de>
+
+	* include/ffi.h.in (FFI_64_BIT_MAX): Define and use.
+
+2011-02-09  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>
+
+	PR libffi/46661
+	* testsuite/libffi.call/cls_pointer.c (main): Cast void * to
+	uintptr_t first.
+	* testsuite/libffi.call/cls_pointer_stack.c (main): Likewise.
+
+2011-02-08  Rafael Avila de Espindola  <respindola@mozilla.com>
+
+	* configure.ac: Fix x86 test for pc related relocs.
+	* configure: Rebuilt.
+
+2011-02-07  Joel Sherrill <joel.sherrill@oarcorp.com>
+
+	* libffi/src/m68k/ffi.c: Add RTEMS support for cache flushing.
+	Handle case when CPU variant does not have long double support.
+	* libffi/src/m68k/sysv.S: Add support for mc68000, Coldfire,
+	and cores with soft floating point.
+
+2011-02-07  Joel Sherrill <joel.sherrill@oarcorp.com>
+
+	* configure.ac: Add mips*-*-rtems* support.
+	* configure: Regenerate.
+	* src/mips/ffitarget.h: Ensure needed constants are available
+	for targets which do not have sgidefs.h.
+
+2011-01-26  Dave Korn  <dave.korn.cygwin@gmail.com>
+
+	PR target/40125
+	* configure.ac (AM_LTLDFLAGS): Add -bindir option for windows DLLs.
+	* configure: Regenerate.
+
+2010-12-18  Iain Sandoe  <iains@gcc.gnu.org>
+
+	PR libffi/29152
+	PR libffi/42378
+	* src/powerpc/darwin_closure.S: Provide Darwin64 implementation,
+	update comments.
+	* src/powerpc/ffitarget.h (POWERPC_DARWIN64): New,
+	(FFI_TRAMPOLINE_SIZE): Update for Darwin64.
+	* src/powerpc/darwin.S: Provide Darwin64 implementation,
+	update comments.
+	* src/powerpc/ffi_darwin.c: Likewise.
+
+2010-12-06  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>
+
+	* configure.ac (libffi_cv_as_ascii_pseudo_op): Use double
+	backslashes.
+	(libffi_cv_as_string_pseudo_op): Likewise.
+	* configure: Regenerate.
+
+2010-12-03  Chung-Lin Tang  <cltang@codesourcery.com>
+
+	* src/arm/sysv.S (ffi_closure_SYSV): Add UNWIND to .pad directive.
+	(ffi_closure_VFP): Same.
+	(ffi_call_VFP): Move down to before ffi_closure_VFP. Add '.fpu vfp'
+	directive.
+
+2010-12-01  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>
+
+	* testsuite/libffi.call/ffitest.h [__sgi] (PRId64, PRIu64): Define.
+	(PRIuPTR): Define.
+
+2010-11-29  Richard Henderson  <rth@redhat.com>
+	    Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>
+
+	* src/x86/sysv.S (FDE_ENCODING, FDE_ENCODE): Define.
+	(.eh_frame): Use FDE_ENCODING.
+	(.LASFDE1, .LASFDE2, LASFDE3): Simplify with FDE_ENCODE.
+
+2010-11-22  Jacek Caban <jacek@codeweavers.com>
+
+	* configure.ac: Check for symbol underscores on mingw-w64.
+	* configure: Rebuilt.
+	* src/x86/win64.S: Correctly access extern symbols in respect to
+	underscores.
+
+2010-11-15  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>
+
+	* testsuite/lib/libffi-dg.exp: Rename ...
+	* testsuite/lib/libffi.exp: ... to this.
+	* libffi/testsuite/libffi.call/call.exp: Don't load libffi-dg.exp.
+	* libffi/testsuite/libffi.special/special.exp: Likewise.
+
+2010-10-28  Chung-Lin Tang  <cltang@codesourcery.com>
+
+	* src/arm/ffi.c (ffi_prep_args): Add VFP register argument handling
+	code, new parameter, and return value. Update comments.
+	(ffi_prep_cif_machdep): Add case for VFP struct return values. Add
+	call to layout_vfp_args().
+	(ffi_call_SYSV): Update declaration.
+	(ffi_call_VFP): New declaration.
+	(ffi_call): Add VFP struct return conditions. Call ffi_call_VFP()
+	when ABI is FFI_VFP.
+	(ffi_closure_VFP): New declaration.
+	(ffi_closure_SYSV_inner): Add new vfp_args parameter, update call to
+	ffi_prep_incoming_args_SYSV().
+	(ffi_prep_incoming_args_SYSV): Update parameters. Add VFP argument
+	case handling.
+	(ffi_prep_closure_loc): Pass ffi_closure_VFP to trampoline
+	construction under VFP hard-float.
+	(rec_vfp_type_p): New function.
+	(vfp_type_p): Same.
+	(place_vfp_arg): Same.
+	(layout_vfp_args): Same.
+	* src/arm/ffitarget.h (ffi_abi): Add FFI_VFP. Define FFI_DEFAULT_ABI
+	based on __ARM_PCS_VFP.
+	(FFI_EXTRA_CIF_FIELDS): Define for adding VFP hard-float specific
+	fields.
+	(FFI_TYPE_STRUCT_VFP_FLOAT): Define internally used type code.
+	(FFI_TYPE_STRUCT_VFP_DOUBLE): Same.
+	* src/arm/sysv.S (ffi_call_SYSV): Change call of ffi_prep_args() to
+	direct call. Move function pointer load upwards.
+	(ffi_call_VFP): New function.
+	(ffi_closure_VFP): Same.
+
+	* testsuite/lib/libffi-dg.exp (check-flags): New function.
+	(dg-skip-if): New function.
+	* testsuite/libffi.call/cls_double_va.c: Skip if target is arm*-*-*
+	and compiler options include -mfloat-abi=hard.
+	* testsuite/libffi.call/cls_longdouble_va.c: Same.
+
+2010-10-01  Jakub Jelinek  <jakub@redhat.com>
+
+	PR libffi/45677
+	* src/x86/ffi64.c (ffi_prep_cif_machdep): Ensure cif->bytes is
+	a multiple of 8.
+	* testsuite/libffi.call/many2.c: New test.
+
+2010-08-20  Mark Wielaard  <mjw@redhat.com>
+
+	* src/closures.c (open_temp_exec_file_mnt): Check if getmntent_r
+	returns NULL.
+
+2010-08-09  Andreas Tobler  <andreast@fgznet.ch>
+
+	* configure.ac: Add target powerpc64-*-freebsd*.
+	* configure: Regenerate.
+	* testsuite/libffi.call/cls_align_longdouble_split.c: Pass
+	-mlong-double-128 only to linux targets.
+	* testsuite/libffi.call/cls_align_longdouble_split2.c: Likewise.
+	* testsuite/libffi.call/cls_longdouble.c: Likewise.
+	* testsuite/libffi.call/huge_struct.c: Likewise.
+
+2010-08-05  Dan Witte  <dwitte@mozilla.com>
+
+        * Makefile.am: Pass FFI_DEBUG define to msvcc.sh for linking to the
+        debug CRT when --enable-debug is given.
+        * configure.ac: Define it.
+        * msvcc.sh: Translate -g and -DFFI_DEBUG appropriately.
+
+2010-08-04  Dan Witte  <dwitte@mozilla.com>
+
+	* src/x86/ffitarget.h: Add X86_ANY define for all x86/x86_64
+	platforms.
+	* src/x86/ffi.c: Remove redundant ifdef checks.
+	* src/prep_cif.c: Push stack space computation into src/x86/ffi.c
+	for X86_ANY so return value space doesn't get added twice.
+
+2010-08-03  Neil Rashbrooke <neil@parkwaycc.co.uk>
+
+	* msvcc.sh: Don't pass -safeseh to ml64 because behavior is buggy.
+
+2010-07-22  Dan Witte  <dwitte@mozilla.com>
+
+	* src/*/ffitarget.h: Make FFI_LAST_ABI one past the last valid ABI.
+	* src/prep_cif.c: Fix ABI assertion.
+        * src/cris/ffi.c: Ditto.
+
+2010-07-10  Evan Phoenix  <evan@fallingsnow.net>
+
+	* src/closures.c (selinux_enabled_check): Fix strncmp usage bug.
+
+2010-07-07  Dan Horák <dan@danny.cz>
+
+	* include/ffi.h.in: Protect #define with #ifndef.
+	* src/powerpc/ffitarget.h: Ditto.
+	* src/s390/ffitarget.h: Ditto.
+	* src/sparc/ffitarget.h: Ditto.
+
+2010-07-07   Neil Roberts <neil@linux.intel.com>
+
+	* src/x86/sysv.S (ffi_call_SYSV): Align the stack pointer to
+	16-bytes.
+
+2010-07-02  Jakub Jelinek  <jakub@redhat.com>
+
+	* Makefile.am (AM_MAKEFLAGS): Pass also mandir to submakes.
+	* Makefile.in: Regenerated.
+
+2010-05-19  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>
+
+	* configure.ac (libffi_cv_as_x86_pcrel): Check for illegal in as
+	output, too.
+	(libffi_cv_as_ascii_pseudo_op): Check for .ascii.
+	(libffi_cv_as_string_pseudo_op): Check for .string.
+	* configure: Regenerate.
+	* fficonfig.h.in: Regenerate.
+	* src/x86/sysv.S (.eh_frame): Use .ascii, .string or error.
+
+2010-05-11  Dan Witte  <dwitte@mozilla.com>
+
+	* doc/libffi.tex: Document previous change.
+
+2010-05-11  Makoto Kato <m_kato@ga2.so-net.ne.jp>
+
+	* src/x86/ffi.c (ffi_call): Don't copy structs passed by value.
+
+2010-05-05  Michael Kohler <michaelkohler@live.com>
+
+	* src/dlmalloc.c (dlfree): Fix spelling.
+	* src/ia64/ffi.c (ffi_prep_cif_machdep): Ditto.
+	* configure.ac: Ditto.
+	* configure: Rebuilt.
+
+2010-04-13  Dan Witte  <dwitte@mozilla.com>
+
+	* msvcc.sh: Build with -W3 instead of -Wall.
+	* src/powerpc/ffi_darwin.c: Remove build warnings.
+	* src/x86/ffi.c: Ditto.
+	* src/x86/ffitarget.h: Ditto.
+
+2010-04-12  Dan Witte  <dwitte@mozilla.com>
+	    Walter Meinl <wuno@lsvw.de>
+
+	* configure.ac: Add OS/2 support.
+	* configure: Rebuilt.
+	* src/closures.c: Ditto.
+	* src/dlmalloc.c: Ditto.
+	* src/x86/win32.S: Ditto.
+
+2010-04-07  Jakub Jelinek  <jakub@redhat.com>
+
+	* testsuite/libffi.call/err_bad_abi.c: Remove unused args variable.
+
+2010-04-02  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* Makefile.in: Regenerate.
+	* aclocal.m4: Regenerate.
+	* include/Makefile.in: Regenerate.
+	* man/Makefile.in: Regenerate.
+	* testsuite/Makefile.in: Regenerate.
+
+2010-03-30  Dan Witte  <dwitte@mozilla.com>
+
+	* msvcc.sh: Disable build warnings.
+	* README (tested): Clarify windows build procedure.
+
+2010-03-15  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>
+
+	* configure.ac (libffi_cv_as_x86_64_unwind_section_type): New test.
+	* configure: Regenerate.
+	* fficonfig.h.in: Regenerate.
+	* libffi/src/x86/unix64.S (.eh_frame)
+	[HAVE_AS_X86_64_UNWIND_SECTION_TYPE]: Use @unwind section type.
+
 2010-03-14  Matthias Klose  <doko@ubuntu.com>
 
 	* src/x86/ffi64.c: Fix typo in comment.
 	* src/x86/ffi.c: Use /* ... */ comment style.
 
+2010-02-24  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>
+
+	* doc/libffi.texi (The Closure API): Fix typo.
+	* doc/libffi.info: Remove.
+
+2010-02-15  Matthias Klose  <doko@ubuntu.com>
+
+	* src/arm/sysv.S (__ARM_ARCH__): Define for processor
+	__ARM_ARCH_7EM__.
+
+2010-01-15  Anthony Green  <green@redhat.com>
+
+	* README: Add notes on building with Microsoft Visual C++.
+
+2010-01-15  Daniel Witte  <dwitte@mozilla.com>
+
+	* msvcc.sh: New file.
+
+	* src/x86/win32.S: Port assembly routines to MSVC and #ifdef.
+	* src/x86/ffi.c: Tweak function declaration and remove excess
+	parens.
+	* include/ffi.h.in: Add __declspec(align(8)) to typedef struct
+	ffi_closure.
+
+	* src/x86/ffi.c: Merge ffi_call_SYSV and ffi_call_STDCALL into new
+	function ffi_call_win32 on X86_WIN32.
+	* src/x86/win32.S (ffi_call_SYSV): Rename to ffi_call_win32.
+	(ffi_call_STDCALL): Remove.
+
+	* src/prep_cif.c (ffi_prep_cif): Move stack space allocation code
+	to ffi_prep_cif_machdep for x86.
+	* src/x86/ffi.c (ffi_prep_cif_machdep): To here.
+
+2010-01-15  Oliver Kiddle  <okiddle@yahoo.co.uk>
+
+	* src/x86/ffitarget.h (ffi_abi): Check for __i386 and __amd64 for
+	Sun Studio compiler compatibility.
+
+2010-01-12  Conrad Irwin <conrad.irwin@gmail.com>
+
+	* doc/libffi.texi: Add closure example.
+
 2010-01-07  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>
 
 	PR libffi/40701
@@ -148,6 +1500,13 @@
 	* src/pa/ffi.c (ffi_closure_inner_pa32): Handle FFI_TYPE_LONGDOUBLE
 	type on HP-UX.
 
+2012-02-13  Kai Tietz  <ktietz@redhat.com>
+
+	PR libffi/52221
+	* src/x86/ffi.c (ffi_prep_raw_closure_loc): Add thiscall
+	support for X86_WIN32.
+	(FFI_INIT_TRAMPOLINE_THISCALL): Fix displacement.
+
 2009-12-11  Eric Botcazou  <ebotcazou@adacore.com>
 
 	* src/sparc/ffi.c (ffi_closure_sparc_inner_v9): Properly align 'long
@@ -322,6 +1681,11 @@
 	* man/Makefile.in: Regenerate.
 	* testsuite/Makefile.in: Regenerate.
 
+2011-08-22  Jasper Lievisse Adriaanse <jasper@openbsd.org>
+
+	* configure.ac: Add OpenBSD/hppa and OpenBSD/powerpc support.
+	* configure: Rebuilt.
+
 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 
 	* configure.ac (_AC_ARG_VAR_PRECIOUS): Use m4_rename_force.
diff --git a/Modules/_ctypes/libffi/ChangeLog.libffi b/Modules/_ctypes/libffi/ChangeLog.libffi
index 5272f33..49ba8da 100644
--- a/Modules/_ctypes/libffi/ChangeLog.libffi
+++ b/Modules/_ctypes/libffi/ChangeLog.libffi
@@ -1,35 +1,6 @@
-2010-01-15  Anthony Green  <green@redhat.com>
+2011-02-08  Andreas Tobler  <andreast@fgznet.ch>
 
-	* README: Add notes on building with Microsoft Visual C++.
-
-2010-01-15  Daniel Witte  <dwitte@mozilla.com>
-
-	* msvcc.sh: New file.
-
-	* src/x86/win32.S: Port assembly routines to MSVC and #ifdef.
-	* src/x86/ffi.c: Tweak function declaration and remove excess
-	parens.
-	* include/ffi.h.in: Add __declspec(align(8)) to typedef struct
-	ffi_closure.
-
-	* src/x86/ffi.c: Merge ffi_call_SYSV and ffi_call_STDCALL into new
-	function ffi_call_win32 on X86_WIN32.
-	* src/x86/win32.S (ffi_call_SYSV): Rename to ffi_call_win32.
-	(ffi_call_STDCALL): Remove.
-
-	* src/prep_cif.c (ffi_prep_cif): Move stack space allocation code
-	to ffi_prep_cif_machdep for x86.
-	* src/x86/ffi.c (ffi_prep_cif_machdep): To here.
-
-2010-01-15  Oliver Kiddle  <okiddle@yahoo.co.uk>
-
-	* src/x86/ffitarget.h (ffi_abi): Check for __i386 and __amd64 for
-	Sun Studio compiler compatibility. 
-
-2010-01-12  Conrad Irwin <conrad.irwin@gmail.com>
-
-	* doc/libffi.texi: Add closure example.
-	* doc/libffi.info: Rebuilt.
+	* testsuite/lib/libffi.exp: Tweak for stand-alone mode.
 
 2009-12-25  Samuli Suominen  <ssuominen@gentoo.org>
 
@@ -603,8 +574,8 @@
 	* Makefile.am, include/Makefile.am: Move headers to
 	libffi_la_SOURCES for new automake.
 	* Makefile.in, include/Makefile.in: Rebuilt.
-	
-	* testsuite/lib/wrapper.exp: Copied from gcc tree to allow for 
+
+	* testsuite/lib/wrapper.exp: Copied from gcc tree to allow for
 	execution outside of gcc tree.
 	* testsuite/lib/target-libpath.exp: Ditto.
 
diff --git a/Modules/_ctypes/libffi/LICENSE b/Modules/_ctypes/libffi/LICENSE
index ec2fd69..aa60342 100644
--- a/Modules/_ctypes/libffi/LICENSE
+++ b/Modules/_ctypes/libffi/LICENSE
@@ -1,4 +1,4 @@
-libffi - Copyright (c) 1996-2009  Anthony Green, Red Hat, Inc and others.  
+libffi - Copyright (c) 1996-2012  Anthony Green, Red Hat, Inc and others.
 See source files for details.
 
 Permission is hereby granted, free of charge, to any person obtaining
@@ -9,8 +9,8 @@
 permit persons to whom the Software is furnished to do so, subject to
 the following conditions:
 
-The above copyright notice and this permission notice shall be included
-in all copies or substantial portions of the Software.
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
 
 THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
 EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
diff --git a/Modules/_ctypes/libffi/Makefile.am b/Modules/_ctypes/libffi/Makefile.am
index f47dd1a..bf0156f 100644
--- a/Modules/_ctypes/libffi/Makefile.am
+++ b/Modules/_ctypes/libffi/Makefile.am
@@ -2,37 +2,50 @@
 
 AUTOMAKE_OPTIONS = foreign subdir-objects
 
+ACLOCAL_AMFLAGS = -I m4
+
 SUBDIRS = include testsuite man
 
-EXTRA_DIST = LICENSE ChangeLog.v1 ChangeLog.libgcj configure.host \
-	src/alpha/ffi.c src/alpha/osf.S src/alpha/ffitarget.h \
-	src/arm/ffi.c src/arm/sysv.S src/arm/ffitarget.h \
-	src/avr32/ffi.c src/avr32/sysv.S src/avr32/ffitarget.h \
-	src/cris/ffi.c src/cris/sysv.S src/cris/ffitarget.h \
-	src/ia64/ffi.c src/ia64/ffitarget.h src/ia64/ia64_flags.h \
-	src/ia64/unix.S \
-	src/mips/ffi.c src/mips/n32.S src/mips/o32.S \
-	src/mips/ffitarget.h \
-	src/m32r/ffi.c src/m32r/sysv.S src/m32r/ffitarget.h \
-	src/m68k/ffi.c src/m68k/sysv.S src/m68k/ffitarget.h \
-	src/powerpc/ffi.c src/powerpc/sysv.S \
-	src/powerpc/linux64.S src/powerpc/linux64_closure.S \
-	src/powerpc/ppc_closure.S src/powerpc/asm.h \
-	src/powerpc/aix.S src/powerpc/darwin.S \
-	src/powerpc/aix_closure.S src/powerpc/darwin_closure.S \
-	src/powerpc/ffi_darwin.c src/powerpc/ffitarget.h \
-	src/s390/ffi.c src/s390/sysv.S src/s390/ffitarget.h \
-	src/sh/ffi.c src/sh/sysv.S src/sh/ffitarget.h \
-	src/sh64/ffi.c src/sh64/sysv.S src/sh64/ffitarget.h \
-	src/sparc/v8.S src/sparc/v9.S src/sparc/ffitarget.h \
-	src/sparc/ffi.c src/x86/darwin64.S \
-	src/x86/ffi.c src/x86/sysv.S src/x86/win32.S src/x86/win64.S \
-	src/x86/darwin.S src/x86/freebsd.S \
-	src/x86/ffi64.c src/x86/unix64.S src/x86/ffitarget.h \
-	src/pa/ffitarget.h src/pa/ffi.c src/pa/linux.S src/pa/hpux32.S \
-	src/frv/ffi.c src/frv/eabi.S src/frv/ffitarget.h src/dlmalloc.c \
-	libtool-version ChangeLog.libffi m4/libtool.m4 \
-	m4/lt~obsolete.m4 m4/ltoptions.m4 m4/ltsugar.m4 m4/ltversion.m4
+EXTRA_DIST = LICENSE ChangeLog.v1 ChangeLog.libgcj configure.host	\
+	 src/aarch64/ffi.c src/aarch64/ffitarget.h src/aarch64/sysv.S	\
+	 build-ios.sh src/alpha/ffi.c src/alpha/osf.S			\
+	 src/alpha/ffitarget.h src/arm/ffi.c src/arm/sysv.S		\
+	 src/arm/ffitarget.h src/avr32/ffi.c src/avr32/sysv.S		\
+	 src/avr32/ffitarget.h src/cris/ffi.c src/cris/sysv.S		\
+	 src/cris/ffitarget.h src/ia64/ffi.c src/ia64/ffitarget.h	\
+	 src/ia64/ia64_flags.h src/ia64/unix.S src/mips/ffi.c		\
+	 src/mips/n32.S src/mips/o32.S src/metag/ffi.c			\
+	 src/metag/ffitarget.h src/metag/sysv.S src/moxie/ffi.c		\
+	 src/moxie/ffitarget.h src/moxie/eabi.S src/mips/ffitarget.h	\
+	 src/m32r/ffi.c src/m32r/sysv.S src/m32r/ffitarget.h		\
+	 src/m68k/ffi.c src/m68k/sysv.S src/m68k/ffitarget.h		\
+	 src/microblaze/ffi.c src/microblaze/sysv.S			\
+	 src/microblaze/ffitarget.h src/powerpc/ffi.c			\
+	 src/powerpc/sysv.S src/powerpc/linux64.S			\
+	 src/powerpc/linux64_closure.S src/powerpc/ppc_closure.S	\
+	 src/powerpc/asm.h src/powerpc/aix.S src/powerpc/darwin.S	\
+	 src/powerpc/aix_closure.S src/powerpc/darwin_closure.S		\
+	 src/powerpc/ffi_darwin.c src/powerpc/ffitarget.h		\
+	 src/s390/ffi.c src/s390/sysv.S src/s390/ffitarget.h		\
+	 src/sh/ffi.c src/sh/sysv.S src/sh/ffitarget.h src/sh64/ffi.c	\
+	 src/sh64/sysv.S src/sh64/ffitarget.h src/sparc/v8.S		\
+	 src/sparc/v9.S src/sparc/ffitarget.h src/sparc/ffi.c		\
+	 src/x86/darwin64.S src/x86/ffi.c src/x86/sysv.S		\
+	 src/x86/win32.S src/x86/darwin.S src/x86/win64.S		\
+	 src/x86/freebsd.S src/x86/ffi64.c src/x86/unix64.S		\
+	 src/x86/ffitarget.h src/pa/ffitarget.h src/pa/ffi.c		\
+	 src/pa/linux.S src/pa/hpux32.S src/frv/ffi.c src/bfin/ffi.c	\
+	 src/bfin/ffitarget.h src/bfin/sysv.S src/frv/eabi.S		\
+	 src/frv/ffitarget.h src/dlmalloc.c src/tile/ffi.c		\
+	 src/tile/ffitarget.h src/tile/tile.S libtool-version		\
+	 src/xtensa/ffitarget.h src/xtensa/ffi.c src/xtensa/sysv.S	\
+	 ChangeLog.libffi m4/libtool.m4 m4/lt~obsolete.m4		\
+	 m4/ltoptions.m4 m4/ltsugar.m4 m4/ltversion.m4			\
+	 m4/ltversion.m4 src/arm/gentramp.sh src/debug.c msvcc.sh	\
+	 generate-ios-source-and-headers.py				\
+	 generate-osx-source-and-headers.py				\
+	 libffi.xcodeproj/project.pbxproj src/arm/trampoline.S		\
+	 libtool-ldflags
 
 info_TEXINFOS = doc/libffi.texi
 
@@ -69,6 +82,7 @@
 	"exec_prefix=$(exec_prefix)" \
 	"infodir=$(infodir)" \
 	"libdir=$(libdir)" \
+	"mandir=$(mandir)" \
 	"prefix=$(prefix)" \
 	"AR=$(AR)" \
 	"AS=$(AS)" \
@@ -79,14 +93,15 @@
 	"RANLIB=$(RANLIB)" \
 	"DESTDIR=$(DESTDIR)"
 
+# Subdir rules rely on $(FLAGS_TO_PASS)
+FLAGS_TO_PASS = $(AM_MAKEFLAGS)
+
 MAKEOVERRIDES=
 
-ACLOCAL_AMFLAGS=$(ACLOCAL_AMFLAGS) -I m4
-
-lib_LTLIBRARIES = libffi.la
+toolexeclib_LTLIBRARIES = libffi.la
 noinst_LTLIBRARIES = libffi_convenience.la
 
-libffi_la_SOURCES = src/debug.c src/prep_cif.c src/types.c \
+libffi_la_SOURCES = src/prep_cif.c src/types.c \
 		src/raw_api.c src/java_raw_api.c src/closures.c
 
 pkgconfigdir = $(libdir)/pkgconfig
@@ -94,9 +109,16 @@
 
 nodist_libffi_la_SOURCES =
 
+if FFI_DEBUG
+nodist_libffi_la_SOURCES += src/debug.c
+endif
+
 if MIPS
 nodist_libffi_la_SOURCES += src/mips/ffi.c src/mips/o32.S src/mips/n32.S
 endif
+if BFIN
+nodist_libffi_la_SOURCES += src/bfin/ffi.c src/bfin/sysv.S
+endif
 if X86
 nodist_libffi_la_SOURCES += src/x86/ffi.c src/x86/sysv.S
 endif
@@ -127,6 +149,12 @@
 if M68K
 nodist_libffi_la_SOURCES += src/m68k/ffi.c src/m68k/sysv.S
 endif
+if MOXIE
+nodist_libffi_la_SOURCES += src/moxie/ffi.c src/moxie/eabi.S
+endif
+if MICROBLAZE
+nodist_libffi_la_SOURCES += src/microblaze/ffi.c src/microblaze/sysv.S
+endif
 if POWERPC
 nodist_libffi_la_SOURCES += src/powerpc/ffi.c src/powerpc/sysv.S src/powerpc/ppc_closure.S src/powerpc/linux64.S src/powerpc/linux64_closure.S
 endif
@@ -139,8 +167,14 @@
 if POWERPC_FREEBSD
 nodist_libffi_la_SOURCES += src/powerpc/ffi.c src/powerpc/sysv.S src/powerpc/ppc_closure.S
 endif
+if AARCH64
+nodist_libffi_la_SOURCES += src/aarch64/sysv.S src/aarch64/ffi.c
+endif
 if ARM
 nodist_libffi_la_SOURCES += src/arm/sysv.S src/arm/ffi.c
+if FFI_EXEC_TRAMPOLINE_TABLE
+nodist_libffi_la_SOURCES += src/arm/trampoline.S
+endif
 endif
 if AVR32
 nodist_libffi_la_SOURCES += src/avr32/sysv.S src/avr32/ffi.c
@@ -169,18 +203,23 @@
 if PA_HPUX
 nodist_libffi_la_SOURCES += src/pa/hpux32.S src/pa/ffi.c
 endif
+if TILE
+nodist_libffi_la_SOURCES += src/tile/tile.S src/tile/ffi.c
+endif
+if XTENSA
+nodist_libffi_la_SOURCES += src/xtensa/sysv.S src/xtensa/ffi.c
+endif
+if METAG
+nodist_libffi_la_SOURCES += src/metag/sysv.S src/metag/ffi.c
+endif
 
 libffi_convenience_la_SOURCES = $(libffi_la_SOURCES)
 nodist_libffi_convenience_la_SOURCES = $(nodist_libffi_la_SOURCES)
 
-AM_CFLAGS = -Wall -g -fexceptions
+LTLDFLAGS = $(shell $(SHELL) $(top_srcdir)/libtool-ldflags $(LDFLAGS))
 
-libffi_la_LDFLAGS = -version-info `grep -v '^\#' $(srcdir)/libtool-version` $(LTLDFLAGS) $(AM_LTLDFLAGS)
+libffi_la_LDFLAGS = -no-undefined -version-info `grep -v '^\#' $(srcdir)/libtool-version` $(LTLDFLAGS) $(AM_LTLDFLAGS)
 
 AM_CPPFLAGS = -I. -I$(top_srcdir)/include -Iinclude -I$(top_srcdir)/src
 AM_CCASFLAGS = $(AM_CPPFLAGS)
 
-# No install-html or install-pdf support in automake yet
-.PHONY: install-html install-pdf
-install-html:
-install-pdf:
diff --git a/Modules/_ctypes/libffi/Makefile.in b/Modules/_ctypes/libffi/Makefile.in
index 49afcc1..4b6abe5 100644
--- a/Modules/_ctypes/libffi/Makefile.in
+++ b/Modules/_ctypes/libffi/Makefile.in
@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11 from Makefile.am.
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,6 +16,23 @@
 
 
 VPATH = @srcdir@
+am__make_dryrun = \
+  { \
+    am__dry=no; \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+      *) \
+        for am__flg in $$MAKEFLAGS; do \
+          case $$am__flg in \
+            *=*|--*) ;; \
+            *n*) am__dry=yes; break;; \
+          esac; \
+        done;; \
+    esac; \
+    test $$am__dry = yes; \
+  }
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -36,31 +52,40 @@
 build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
-@MIPS_TRUE@am__append_1 = src/mips/ffi.c src/mips/o32.S src/mips/n32.S
-@X86_TRUE@am__append_2 = src/x86/ffi.c src/x86/sysv.S
-@X86_FREEBSD_TRUE@am__append_3 = src/x86/ffi.c src/x86/freebsd.S
-@X86_WIN32_TRUE@am__append_4 = src/x86/ffi.c src/x86/win32.S
-@X86_WIN64_TRUE@am__append_5 = src/x86/ffi.c src/x86/win64.S
-@X86_DARWIN_TRUE@am__append_6 = src/x86/ffi.c src/x86/darwin.S src/x86/ffi64.c src/x86/darwin64.S
-@SPARC_TRUE@am__append_7 = src/sparc/ffi.c src/sparc/v8.S src/sparc/v9.S
-@ALPHA_TRUE@am__append_8 = src/alpha/ffi.c src/alpha/osf.S
-@IA64_TRUE@am__append_9 = src/ia64/ffi.c src/ia64/unix.S
-@M32R_TRUE@am__append_10 = src/m32r/sysv.S src/m32r/ffi.c
-@M68K_TRUE@am__append_11 = src/m68k/ffi.c src/m68k/sysv.S
-@POWERPC_TRUE@am__append_12 = src/powerpc/ffi.c src/powerpc/sysv.S src/powerpc/ppc_closure.S src/powerpc/linux64.S src/powerpc/linux64_closure.S
-@POWERPC_AIX_TRUE@am__append_13 = src/powerpc/ffi_darwin.c src/powerpc/aix.S src/powerpc/aix_closure.S
-@POWERPC_DARWIN_TRUE@am__append_14 = src/powerpc/ffi_darwin.c src/powerpc/darwin.S src/powerpc/darwin_closure.S
-@POWERPC_FREEBSD_TRUE@am__append_15 = src/powerpc/ffi.c src/powerpc/sysv.S src/powerpc/ppc_closure.S
-@ARM_TRUE@am__append_16 = src/arm/sysv.S src/arm/ffi.c
-@AVR32_TRUE@am__append_17 = src/avr32/sysv.S src/avr32/ffi.c
-@LIBFFI_CRIS_TRUE@am__append_18 = src/cris/sysv.S src/cris/ffi.c
-@FRV_TRUE@am__append_19 = src/frv/eabi.S src/frv/ffi.c
-@S390_TRUE@am__append_20 = src/s390/sysv.S src/s390/ffi.c
-@X86_64_TRUE@am__append_21 = src/x86/ffi64.c src/x86/unix64.S src/x86/ffi.c src/x86/sysv.S
-@SH_TRUE@am__append_22 = src/sh/sysv.S src/sh/ffi.c
-@SH64_TRUE@am__append_23 = src/sh64/sysv.S src/sh64/ffi.c
-@PA_LINUX_TRUE@am__append_24 = src/pa/linux.S src/pa/ffi.c
-@PA_HPUX_TRUE@am__append_25 = src/pa/hpux32.S src/pa/ffi.c
+@FFI_DEBUG_TRUE@am__append_1 = src/debug.c
+@MIPS_TRUE@am__append_2 = src/mips/ffi.c src/mips/o32.S src/mips/n32.S
+@BFIN_TRUE@am__append_3 = src/bfin/ffi.c src/bfin/sysv.S
+@X86_TRUE@am__append_4 = src/x86/ffi.c src/x86/sysv.S
+@X86_FREEBSD_TRUE@am__append_5 = src/x86/ffi.c src/x86/freebsd.S
+@X86_WIN32_TRUE@am__append_6 = src/x86/ffi.c src/x86/win32.S
+@X86_WIN64_TRUE@am__append_7 = src/x86/ffi.c src/x86/win64.S
+@X86_DARWIN_TRUE@am__append_8 = src/x86/ffi.c src/x86/darwin.S src/x86/ffi64.c src/x86/darwin64.S
+@SPARC_TRUE@am__append_9 = src/sparc/ffi.c src/sparc/v8.S src/sparc/v9.S
+@ALPHA_TRUE@am__append_10 = src/alpha/ffi.c src/alpha/osf.S
+@IA64_TRUE@am__append_11 = src/ia64/ffi.c src/ia64/unix.S
+@M32R_TRUE@am__append_12 = src/m32r/sysv.S src/m32r/ffi.c
+@M68K_TRUE@am__append_13 = src/m68k/ffi.c src/m68k/sysv.S
+@MOXIE_TRUE@am__append_14 = src/moxie/ffi.c src/moxie/eabi.S
+@MICROBLAZE_TRUE@am__append_15 = src/microblaze/ffi.c src/microblaze/sysv.S
+@POWERPC_TRUE@am__append_16 = src/powerpc/ffi.c src/powerpc/sysv.S src/powerpc/ppc_closure.S src/powerpc/linux64.S src/powerpc/linux64_closure.S
+@POWERPC_AIX_TRUE@am__append_17 = src/powerpc/ffi_darwin.c src/powerpc/aix.S src/powerpc/aix_closure.S
+@POWERPC_DARWIN_TRUE@am__append_18 = src/powerpc/ffi_darwin.c src/powerpc/darwin.S src/powerpc/darwin_closure.S
+@POWERPC_FREEBSD_TRUE@am__append_19 = src/powerpc/ffi.c src/powerpc/sysv.S src/powerpc/ppc_closure.S
+@AARCH64_TRUE@am__append_20 = src/aarch64/sysv.S src/aarch64/ffi.c
+@ARM_TRUE@am__append_21 = src/arm/sysv.S src/arm/ffi.c
+@ARM_TRUE@@FFI_EXEC_TRAMPOLINE_TABLE_TRUE@am__append_22 = src/arm/trampoline.S
+@AVR32_TRUE@am__append_23 = src/avr32/sysv.S src/avr32/ffi.c
+@LIBFFI_CRIS_TRUE@am__append_24 = src/cris/sysv.S src/cris/ffi.c
+@FRV_TRUE@am__append_25 = src/frv/eabi.S src/frv/ffi.c
+@S390_TRUE@am__append_26 = src/s390/sysv.S src/s390/ffi.c
+@X86_64_TRUE@am__append_27 = src/x86/ffi64.c src/x86/unix64.S src/x86/ffi.c src/x86/sysv.S
+@SH_TRUE@am__append_28 = src/sh/sysv.S src/sh/ffi.c
+@SH64_TRUE@am__append_29 = src/sh64/sysv.S src/sh64/ffi.c
+@PA_LINUX_TRUE@am__append_30 = src/pa/linux.S src/pa/ffi.c
+@PA_HPUX_TRUE@am__append_31 = src/pa/hpux32.S src/pa/ffi.c
+@TILE_TRUE@am__append_32 = src/tile/tile.S src/tile/ffi.c
+@XTENSA_TRUE@am__append_33 = src/xtensa/sysv.S src/xtensa/ffi.c
+@METAG_TRUE@am__append_34 = src/metag/sysv.S src/metag/ffi.c
 subdir = .
 DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
 	$(srcdir)/Makefile.in $(srcdir)/doc/stamp-vti \
@@ -69,7 +94,19 @@
 	compile config.guess config.sub depcomp install-sh ltmain.sh \
 	mdate-sh missing texinfo.tex
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+am__aclocal_m4_deps = $(top_srcdir)/m4/asmcfi.m4 \
+	$(top_srcdir)/m4/ax_append_flag.m4 \
+	$(top_srcdir)/m4/ax_cc_maxopt.m4 \
+	$(top_srcdir)/m4/ax_cflags_warn_all.m4 \
+	$(top_srcdir)/m4/ax_check_compile_flag.m4 \
+	$(top_srcdir)/m4/ax_compiler_vendor.m4 \
+	$(top_srcdir)/m4/ax_configure_args.m4 \
+	$(top_srcdir)/m4/ax_enable_builddir.m4 \
+	$(top_srcdir)/m4/ax_gcc_archflag.m4 \
+	$(top_srcdir)/m4/ax_gcc_x86_cpuid.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/acinclude.m4 \
 	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
@@ -100,51 +137,67 @@
 am__base_list = \
   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(infodir)" \
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(toolexeclibdir)" "$(DESTDIR)$(infodir)" \
 	"$(DESTDIR)$(pkgconfigdir)"
-LTLIBRARIES = $(lib_LTLIBRARIES) $(noinst_LTLIBRARIES)
+LTLIBRARIES = $(noinst_LTLIBRARIES) $(toolexeclib_LTLIBRARIES)
 libffi_la_LIBADD =
 am__dirstamp = $(am__leading_dot)dirstamp
-am_libffi_la_OBJECTS = src/debug.lo src/prep_cif.lo src/types.lo \
-	src/raw_api.lo src/java_raw_api.lo src/closures.lo
-@MIPS_TRUE@am__objects_1 = src/mips/ffi.lo src/mips/o32.lo \
+am_libffi_la_OBJECTS = src/prep_cif.lo src/types.lo src/raw_api.lo \
+	src/java_raw_api.lo src/closures.lo
+@FFI_DEBUG_TRUE@am__objects_1 = src/debug.lo
+@MIPS_TRUE@am__objects_2 = src/mips/ffi.lo src/mips/o32.lo \
 @MIPS_TRUE@	src/mips/n32.lo
-@X86_TRUE@am__objects_2 = src/x86/ffi.lo src/x86/sysv.lo
-@X86_FREEBSD_TRUE@am__objects_3 = src/x86/ffi.lo src/x86/freebsd.lo
-@X86_WIN32_TRUE@am__objects_4 = src/x86/ffi.lo src/x86/win32.lo
-@X86_WIN64_TRUE@am__objects_5 = src/x86/ffi.lo src/x86/win64.lo
-@X86_DARWIN_TRUE@am__objects_6 = src/x86/ffi.lo src/x86/darwin.lo \
+@BFIN_TRUE@am__objects_3 = src/bfin/ffi.lo src/bfin/sysv.lo
+@X86_TRUE@am__objects_4 = src/x86/ffi.lo src/x86/sysv.lo
+@X86_FREEBSD_TRUE@am__objects_5 = src/x86/ffi.lo src/x86/freebsd.lo
+@X86_WIN32_TRUE@am__objects_6 = src/x86/ffi.lo src/x86/win32.lo
+@X86_WIN64_TRUE@am__objects_7 = src/x86/ffi.lo src/x86/win64.lo
+@X86_DARWIN_TRUE@am__objects_8 = src/x86/ffi.lo src/x86/darwin.lo \
 @X86_DARWIN_TRUE@	src/x86/ffi64.lo src/x86/darwin64.lo
-@SPARC_TRUE@am__objects_7 = src/sparc/ffi.lo src/sparc/v8.lo \
+@SPARC_TRUE@am__objects_9 = src/sparc/ffi.lo src/sparc/v8.lo \
 @SPARC_TRUE@	src/sparc/v9.lo
-@ALPHA_TRUE@am__objects_8 = src/alpha/ffi.lo src/alpha/osf.lo
-@IA64_TRUE@am__objects_9 = src/ia64/ffi.lo src/ia64/unix.lo
-@M32R_TRUE@am__objects_10 = src/m32r/sysv.lo src/m32r/ffi.lo
-@M68K_TRUE@am__objects_11 = src/m68k/ffi.lo src/m68k/sysv.lo
-@POWERPC_TRUE@am__objects_12 = src/powerpc/ffi.lo src/powerpc/sysv.lo \
+@ALPHA_TRUE@am__objects_10 = src/alpha/ffi.lo src/alpha/osf.lo
+@IA64_TRUE@am__objects_11 = src/ia64/ffi.lo src/ia64/unix.lo
+@M32R_TRUE@am__objects_12 = src/m32r/sysv.lo src/m32r/ffi.lo
+@M68K_TRUE@am__objects_13 = src/m68k/ffi.lo src/m68k/sysv.lo
+@MOXIE_TRUE@am__objects_14 = src/moxie/ffi.lo src/moxie/eabi.lo
+@MICROBLAZE_TRUE@am__objects_15 = src/microblaze/ffi.lo \
+@MICROBLAZE_TRUE@	src/microblaze/sysv.lo
+@POWERPC_TRUE@am__objects_16 = src/powerpc/ffi.lo src/powerpc/sysv.lo \
 @POWERPC_TRUE@	src/powerpc/ppc_closure.lo \
 @POWERPC_TRUE@	src/powerpc/linux64.lo \
 @POWERPC_TRUE@	src/powerpc/linux64_closure.lo
-@POWERPC_AIX_TRUE@am__objects_13 = src/powerpc/ffi_darwin.lo \
+@POWERPC_AIX_TRUE@am__objects_17 = src/powerpc/ffi_darwin.lo \
 @POWERPC_AIX_TRUE@	src/powerpc/aix.lo \
 @POWERPC_AIX_TRUE@	src/powerpc/aix_closure.lo
-@POWERPC_DARWIN_TRUE@am__objects_14 = src/powerpc/ffi_darwin.lo \
+@POWERPC_DARWIN_TRUE@am__objects_18 = src/powerpc/ffi_darwin.lo \
 @POWERPC_DARWIN_TRUE@	src/powerpc/darwin.lo \
 @POWERPC_DARWIN_TRUE@	src/powerpc/darwin_closure.lo
-@POWERPC_FREEBSD_TRUE@am__objects_15 = src/powerpc/ffi.lo \
+@POWERPC_FREEBSD_TRUE@am__objects_19 = src/powerpc/ffi.lo \
 @POWERPC_FREEBSD_TRUE@	src/powerpc/sysv.lo \
 @POWERPC_FREEBSD_TRUE@	src/powerpc/ppc_closure.lo
-@ARM_TRUE@am__objects_16 = src/arm/sysv.lo src/arm/ffi.lo
-@AVR32_TRUE@am__objects_17 = src/avr32/sysv.lo src/avr32/ffi.lo
-@LIBFFI_CRIS_TRUE@am__objects_18 = src/cris/sysv.lo src/cris/ffi.lo
-@FRV_TRUE@am__objects_19 = src/frv/eabi.lo src/frv/ffi.lo
-@S390_TRUE@am__objects_20 = src/s390/sysv.lo src/s390/ffi.lo
-@X86_64_TRUE@am__objects_21 = src/x86/ffi64.lo src/x86/unix64.lo \
+@AARCH64_TRUE@am__objects_20 = src/aarch64/sysv.lo src/aarch64/ffi.lo
+@ARM_TRUE@am__objects_21 = src/arm/sysv.lo src/arm/ffi.lo
+@ARM_TRUE@@FFI_EXEC_TRAMPOLINE_TABLE_TRUE@am__objects_22 = src/arm/trampoline.lo
+@AVR32_TRUE@am__objects_23 = src/avr32/sysv.lo src/avr32/ffi.lo
+@LIBFFI_CRIS_TRUE@am__objects_24 = src/cris/sysv.lo src/cris/ffi.lo
+@FRV_TRUE@am__objects_25 = src/frv/eabi.lo src/frv/ffi.lo
+@S390_TRUE@am__objects_26 = src/s390/sysv.lo src/s390/ffi.lo
+@X86_64_TRUE@am__objects_27 = src/x86/ffi64.lo src/x86/unix64.lo \
 @X86_64_TRUE@	src/x86/ffi.lo src/x86/sysv.lo
-@SH_TRUE@am__objects_22 = src/sh/sysv.lo src/sh/ffi.lo
-@SH64_TRUE@am__objects_23 = src/sh64/sysv.lo src/sh64/ffi.lo
-@PA_LINUX_TRUE@am__objects_24 = src/pa/linux.lo src/pa/ffi.lo
-@PA_HPUX_TRUE@am__objects_25 = src/pa/hpux32.lo src/pa/ffi.lo
+@SH_TRUE@am__objects_28 = src/sh/sysv.lo src/sh/ffi.lo
+@SH64_TRUE@am__objects_29 = src/sh64/sysv.lo src/sh64/ffi.lo
+@PA_LINUX_TRUE@am__objects_30 = src/pa/linux.lo src/pa/ffi.lo
+@PA_HPUX_TRUE@am__objects_31 = src/pa/hpux32.lo src/pa/ffi.lo
+@TILE_TRUE@am__objects_32 = src/tile/tile.lo src/tile/ffi.lo
+@XTENSA_TRUE@am__objects_33 = src/xtensa/sysv.lo src/xtensa/ffi.lo
+@METAG_TRUE@am__objects_34 = src/metag/sysv.lo src/metag/ffi.lo
 nodist_libffi_la_OBJECTS = $(am__objects_1) $(am__objects_2) \
 	$(am__objects_3) $(am__objects_4) $(am__objects_5) \
 	$(am__objects_6) $(am__objects_7) $(am__objects_8) \
@@ -153,17 +206,20 @@
 	$(am__objects_15) $(am__objects_16) $(am__objects_17) \
 	$(am__objects_18) $(am__objects_19) $(am__objects_20) \
 	$(am__objects_21) $(am__objects_22) $(am__objects_23) \
-	$(am__objects_24) $(am__objects_25)
+	$(am__objects_24) $(am__objects_25) $(am__objects_26) \
+	$(am__objects_27) $(am__objects_28) $(am__objects_29) \
+	$(am__objects_30) $(am__objects_31) $(am__objects_32) \
+	$(am__objects_33) $(am__objects_34)
 libffi_la_OBJECTS = $(am_libffi_la_OBJECTS) \
 	$(nodist_libffi_la_OBJECTS)
 libffi_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
 	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
 	$(libffi_la_LDFLAGS) $(LDFLAGS) -o $@
 libffi_convenience_la_LIBADD =
-am__objects_26 = src/debug.lo src/prep_cif.lo src/types.lo \
-	src/raw_api.lo src/java_raw_api.lo src/closures.lo
-am_libffi_convenience_la_OBJECTS = $(am__objects_26)
-am__objects_27 = $(am__objects_1) $(am__objects_2) $(am__objects_3) \
+am__objects_35 = src/prep_cif.lo src/types.lo src/raw_api.lo \
+	src/java_raw_api.lo src/closures.lo
+am_libffi_convenience_la_OBJECTS = $(am__objects_35)
+am__objects_36 = $(am__objects_1) $(am__objects_2) $(am__objects_3) \
 	$(am__objects_4) $(am__objects_5) $(am__objects_6) \
 	$(am__objects_7) $(am__objects_8) $(am__objects_9) \
 	$(am__objects_10) $(am__objects_11) $(am__objects_12) \
@@ -171,8 +227,11 @@
 	$(am__objects_16) $(am__objects_17) $(am__objects_18) \
 	$(am__objects_19) $(am__objects_20) $(am__objects_21) \
 	$(am__objects_22) $(am__objects_23) $(am__objects_24) \
-	$(am__objects_25)
-nodist_libffi_convenience_la_OBJECTS = $(am__objects_27)
+	$(am__objects_25) $(am__objects_26) $(am__objects_27) \
+	$(am__objects_28) $(am__objects_29) $(am__objects_30) \
+	$(am__objects_31) $(am__objects_32) $(am__objects_33) \
+	$(am__objects_34)
+nodist_libffi_convenience_la_OBJECTS = $(am__objects_36)
 libffi_convenience_la_OBJECTS = $(am_libffi_convenience_la_OBJECTS) \
 	$(nodist_libffi_convenience_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@
@@ -216,22 +275,31 @@
 	install-pdf-recursive install-ps-recursive install-recursive \
 	installcheck-recursive installdirs-recursive pdf-recursive \
 	ps-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
 DATA = $(pkgconfig_DATA)
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
 	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
-	distdir dist dist-all distcheck
+	cscope distdir dist dist-all distcheck
 ETAGS = etags
 CTAGS = ctags
+CSCOPE = cscope
 DIST_SUBDIRS = $(SUBDIRS)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
 am__remove_distdir = \
-  { test ! -d "$(distdir)" \
-    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr "$(distdir)"; }; }
+  if test -d "$(distdir)"; then \
+    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+      && rm -rf "$(distdir)" \
+      || { sleep 5 && rm -rf "$(distdir)"; }; \
+  else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
 am__relativize = \
   dir0=`pwd`; \
   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
@@ -259,7 +327,10 @@
   reldir="$$dir2"
 DIST_ARCHIVES = $(distdir).tar.gz
 GZIP_ENV = --best
+DIST_TARGETS = dist-gzip
 distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
 distcleancheck_listfiles = find . -type f -print
 ACLOCAL = @ACLOCAL@
 ALLOCA = @ALLOCA@
@@ -282,6 +353,7 @@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
 DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
@@ -289,6 +361,7 @@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
+FFI_EXEC_TRAMPOLINE_TABLE = @FFI_EXEC_TRAMPOLINE_TABLE@
 FGREP = @FGREP@
 GREP = @GREP@
 HAVE_LONG_DOUBLE = @HAVE_LONG_DOUBLE@
@@ -307,6 +380,7 @@
 LTLIBOBJS = @LTLIBOBJS@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
 NM = @NM@
 NMEDIT = @NMEDIT@
@@ -319,8 +393,10 @@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
+PRTDIAG = @PRTDIAG@
 RANLIB = @RANLIB@
 SED = @SED@
 SET_MAKE = @SET_MAKE@
@@ -333,6 +409,7 @@
 abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 am__include = @am__include@
@@ -340,6 +417,7 @@
 am__quote = @am__quote@
 am__tar = @am__tar@
 am__untar = @am__untar@
+ax_enable_builddir_sed = @ax_enable_builddir_sed@
 bindir = @bindir@
 build = @build@
 build_alias = @build_alias@
@@ -365,7 +443,6 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -376,6 +453,7 @@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
+sys_symbol_underscore = @sys_symbol_underscore@
 sysconfdir = @sysconfdir@
 target = @target@
 target_alias = @target_alias@
@@ -388,36 +466,48 @@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
 AUTOMAKE_OPTIONS = foreign subdir-objects
+ACLOCAL_AMFLAGS = -I m4
 SUBDIRS = include testsuite man
-EXTRA_DIST = LICENSE ChangeLog.v1 ChangeLog.libgcj configure.host \
-	src/alpha/ffi.c src/alpha/osf.S src/alpha/ffitarget.h \
-	src/arm/ffi.c src/arm/sysv.S src/arm/ffitarget.h \
-	src/avr32/ffi.c src/avr32/sysv.S src/avr32/ffitarget.h \
-	src/cris/ffi.c src/cris/sysv.S src/cris/ffitarget.h \
-	src/ia64/ffi.c src/ia64/ffitarget.h src/ia64/ia64_flags.h \
-	src/ia64/unix.S \
-	src/mips/ffi.c src/mips/n32.S src/mips/o32.S \
-	src/mips/ffitarget.h \
-	src/m32r/ffi.c src/m32r/sysv.S src/m32r/ffitarget.h \
-	src/m68k/ffi.c src/m68k/sysv.S src/m68k/ffitarget.h \
-	src/powerpc/ffi.c src/powerpc/sysv.S \
-	src/powerpc/linux64.S src/powerpc/linux64_closure.S \
-	src/powerpc/ppc_closure.S src/powerpc/asm.h \
-	src/powerpc/aix.S src/powerpc/darwin.S \
-	src/powerpc/aix_closure.S src/powerpc/darwin_closure.S \
-	src/powerpc/ffi_darwin.c src/powerpc/ffitarget.h \
-	src/s390/ffi.c src/s390/sysv.S src/s390/ffitarget.h \
-	src/sh/ffi.c src/sh/sysv.S src/sh/ffitarget.h \
-	src/sh64/ffi.c src/sh64/sysv.S src/sh64/ffitarget.h \
-	src/sparc/v8.S src/sparc/v9.S src/sparc/ffitarget.h \
-	src/sparc/ffi.c src/x86/darwin64.S \
-	src/x86/ffi.c src/x86/sysv.S src/x86/win32.S src/x86/win64.S \
-	src/x86/darwin.S src/x86/freebsd.S \
-	src/x86/ffi64.c src/x86/unix64.S src/x86/ffitarget.h \
-	src/pa/ffitarget.h src/pa/ffi.c src/pa/linux.S src/pa/hpux32.S \
-	src/frv/ffi.c src/frv/eabi.S src/frv/ffitarget.h src/dlmalloc.c \
-	libtool-version ChangeLog.libffi m4/libtool.m4 \
-	m4/lt~obsolete.m4 m4/ltoptions.m4 m4/ltsugar.m4 m4/ltversion.m4
+EXTRA_DIST = LICENSE ChangeLog.v1 ChangeLog.libgcj configure.host	\
+	 src/aarch64/ffi.c src/aarch64/ffitarget.h src/aarch64/sysv.S	\
+	 build-ios.sh src/alpha/ffi.c src/alpha/osf.S			\
+	 src/alpha/ffitarget.h src/arm/ffi.c src/arm/sysv.S		\
+	 src/arm/ffitarget.h src/avr32/ffi.c src/avr32/sysv.S		\
+	 src/avr32/ffitarget.h src/cris/ffi.c src/cris/sysv.S		\
+	 src/cris/ffitarget.h src/ia64/ffi.c src/ia64/ffitarget.h	\
+	 src/ia64/ia64_flags.h src/ia64/unix.S src/mips/ffi.c		\
+	 src/mips/n32.S src/mips/o32.S src/metag/ffi.c			\
+	 src/metag/ffitarget.h src/metag/sysv.S src/moxie/ffi.c		\
+	 src/moxie/ffitarget.h src/moxie/eabi.S src/mips/ffitarget.h	\
+	 src/m32r/ffi.c src/m32r/sysv.S src/m32r/ffitarget.h		\
+	 src/m68k/ffi.c src/m68k/sysv.S src/m68k/ffitarget.h		\
+	 src/microblaze/ffi.c src/microblaze/sysv.S			\
+	 src/microblaze/ffitarget.h src/powerpc/ffi.c			\
+	 src/powerpc/sysv.S src/powerpc/linux64.S			\
+	 src/powerpc/linux64_closure.S src/powerpc/ppc_closure.S	\
+	 src/powerpc/asm.h src/powerpc/aix.S src/powerpc/darwin.S	\
+	 src/powerpc/aix_closure.S src/powerpc/darwin_closure.S		\
+	 src/powerpc/ffi_darwin.c src/powerpc/ffitarget.h		\
+	 src/s390/ffi.c src/s390/sysv.S src/s390/ffitarget.h		\
+	 src/sh/ffi.c src/sh/sysv.S src/sh/ffitarget.h src/sh64/ffi.c	\
+	 src/sh64/sysv.S src/sh64/ffitarget.h src/sparc/v8.S		\
+	 src/sparc/v9.S src/sparc/ffitarget.h src/sparc/ffi.c		\
+	 src/x86/darwin64.S src/x86/ffi.c src/x86/sysv.S		\
+	 src/x86/win32.S src/x86/darwin.S src/x86/win64.S		\
+	 src/x86/freebsd.S src/x86/ffi64.c src/x86/unix64.S		\
+	 src/x86/ffitarget.h src/pa/ffitarget.h src/pa/ffi.c		\
+	 src/pa/linux.S src/pa/hpux32.S src/frv/ffi.c src/bfin/ffi.c	\
+	 src/bfin/ffitarget.h src/bfin/sysv.S src/frv/eabi.S		\
+	 src/frv/ffitarget.h src/dlmalloc.c src/tile/ffi.c		\
+	 src/tile/ffitarget.h src/tile/tile.S libtool-version		\
+	 src/xtensa/ffitarget.h src/xtensa/ffi.c src/xtensa/sysv.S	\
+	 ChangeLog.libffi m4/libtool.m4 m4/lt~obsolete.m4		\
+	 m4/ltoptions.m4 m4/ltsugar.m4 m4/ltversion.m4			\
+	 m4/ltversion.m4 src/arm/gentramp.sh src/debug.c msvcc.sh	\
+	 generate-ios-source-and-headers.py				\
+	 generate-osx-source-and-headers.py				\
+	 libffi.xcodeproj/project.pbxproj src/arm/trampoline.S		\
+	 libtool-ldflags
 
 info_TEXINFOS = doc/libffi.texi
 
@@ -448,6 +538,7 @@
 	"exec_prefix=$(exec_prefix)" \
 	"infodir=$(infodir)" \
 	"libdir=$(libdir)" \
+	"mandir=$(mandir)" \
 	"prefix=$(prefix)" \
 	"AR=$(AR)" \
 	"AS=$(AS)" \
@@ -458,11 +549,13 @@
 	"RANLIB=$(RANLIB)" \
 	"DESTDIR=$(DESTDIR)"
 
+
+# Subdir rules rely on $(FLAGS_TO_PASS)
+FLAGS_TO_PASS = $(AM_MAKEFLAGS)
 MAKEOVERRIDES = 
-ACLOCAL_AMFLAGS = $(ACLOCAL_AMFLAGS) -I m4
-lib_LTLIBRARIES = libffi.la
+toolexeclib_LTLIBRARIES = libffi.la
 noinst_LTLIBRARIES = libffi_convenience.la
-libffi_la_SOURCES = src/debug.c src/prep_cif.c src/types.c \
+libffi_la_SOURCES = src/prep_cif.c src/types.c \
 		src/raw_api.c src/java_raw_api.c src/closures.c
 
 pkgconfigdir = $(libdir)/pkgconfig
@@ -475,11 +568,14 @@
 	$(am__append_15) $(am__append_16) $(am__append_17) \
 	$(am__append_18) $(am__append_19) $(am__append_20) \
 	$(am__append_21) $(am__append_22) $(am__append_23) \
-	$(am__append_24) $(am__append_25)
+	$(am__append_24) $(am__append_25) $(am__append_26) \
+	$(am__append_27) $(am__append_28) $(am__append_29) \
+	$(am__append_30) $(am__append_31) $(am__append_32) \
+	$(am__append_33) $(am__append_34)
 libffi_convenience_la_SOURCES = $(libffi_la_SOURCES)
 nodist_libffi_convenience_la_SOURCES = $(nodist_libffi_la_SOURCES)
-AM_CFLAGS = -Wall -g -fexceptions
-libffi_la_LDFLAGS = -version-info `grep -v '^\#' $(srcdir)/libtool-version` $(AM_LTLDFLAGS)
+LTLDFLAGS = $(shell $(SHELL) $(top_srcdir)/libtool-ldflags $(LDFLAGS))
+libffi_la_LDFLAGS = -no-undefined -version-info `grep -v '^\#' $(srcdir)/libtool-version` $(LTLDFLAGS) $(AM_LTLDFLAGS)
 AM_CPPFLAGS = -I. -I$(top_srcdir)/include -Iinclude -I$(top_srcdir)/src
 AM_CCASFLAGS = $(AM_CPPFLAGS)
 all: fficonfig.h
@@ -487,7 +583,7 @@
 
 .SUFFIXES:
 .SUFFIXES: .S .c .dvi .lo .o .obj .ps
-am--refresh:
+am--refresh: Makefile
 	@:
 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
@@ -523,10 +619,8 @@
 $(am__aclocal_m4_deps):
 
 fficonfig.h: stamp-h1
-	@if test ! -f $@; then \
-	  rm -f stamp-h1; \
-	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
-	else :; fi
+	@if test ! -f $@; then rm -f stamp-h1; else :; fi
+	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
 
 stamp-h1: $(srcdir)/fficonfig.h.in $(top_builddir)/config.status
 	@rm -f stamp-h1
@@ -540,58 +634,63 @@
 	-rm -f fficonfig.h stamp-h1
 libffi.pc: $(top_builddir)/config.status $(srcdir)/libffi.pc.in
 	cd $(top_builddir) && $(SHELL) ./config.status $@
-install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+
+clean-noinstLTLIBRARIES:
+	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
+	@list='$(noinst_LTLIBRARIES)'; \
+	locs=`for p in $$list; do echo $$p; done | \
+	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
+	      sort -u`; \
+	test -z "$$locs" || { \
+	  echo rm -f $${locs}; \
+	  rm -f $${locs}; \
+	}
+install-toolexeclibLTLIBRARIES: $(toolexeclib_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
-	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
-	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	@list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \
 	list2=; for p in $$list; do \
 	  if test -f $$p; then \
 	    list2="$$list2 $$p"; \
 	  else :; fi; \
 	done; \
 	test -z "$$list2" || { \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(toolexeclibdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(toolexeclibdir)" || exit 1; \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(toolexeclibdir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(toolexeclibdir)"; \
 	}
 
-uninstall-libLTLIBRARIES:
+uninstall-toolexeclibLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
-	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	@list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \
 	for p in $$list; do \
 	  $(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(toolexeclibdir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(toolexeclibdir)/$$f"; \
 	done
 
-clean-libLTLIBRARIES:
-	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
-	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
-	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
-	  test "$$dir" != "$$p" || dir=.; \
-	  echo "rm -f \"$${dir}/so_locations\""; \
-	  rm -f "$${dir}/so_locations"; \
-	done
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-	@list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
-	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
-	  test "$$dir" != "$$p" || dir=.; \
-	  echo "rm -f \"$${dir}/so_locations\""; \
-	  rm -f "$${dir}/so_locations"; \
-	done
+clean-toolexeclibLTLIBRARIES:
+	-test -z "$(toolexeclib_LTLIBRARIES)" || rm -f $(toolexeclib_LTLIBRARIES)
+	@list='$(toolexeclib_LTLIBRARIES)'; \
+	locs=`for p in $$list; do echo $$p; done | \
+	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
+	      sort -u`; \
+	test -z "$$locs" || { \
+	  echo rm -f $${locs}; \
+	  rm -f $${locs}; \
+	}
 src/$(am__dirstamp):
 	@$(MKDIR_P) src
 	@: > src/$(am__dirstamp)
 src/$(DEPDIR)/$(am__dirstamp):
 	@$(MKDIR_P) src/$(DEPDIR)
 	@: > src/$(DEPDIR)/$(am__dirstamp)
-src/debug.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
 src/prep_cif.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
 src/types.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
 src/raw_api.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
 src/java_raw_api.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
 src/closures.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
+src/debug.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
 src/mips/$(am__dirstamp):
 	@$(MKDIR_P) src/mips
 	@: > src/mips/$(am__dirstamp)
@@ -604,6 +703,16 @@
 	src/mips/$(DEPDIR)/$(am__dirstamp)
 src/mips/n32.lo: src/mips/$(am__dirstamp) \
 	src/mips/$(DEPDIR)/$(am__dirstamp)
+src/bfin/$(am__dirstamp):
+	@$(MKDIR_P) src/bfin
+	@: > src/bfin/$(am__dirstamp)
+src/bfin/$(DEPDIR)/$(am__dirstamp):
+	@$(MKDIR_P) src/bfin/$(DEPDIR)
+	@: > src/bfin/$(DEPDIR)/$(am__dirstamp)
+src/bfin/ffi.lo: src/bfin/$(am__dirstamp) \
+	src/bfin/$(DEPDIR)/$(am__dirstamp)
+src/bfin/sysv.lo: src/bfin/$(am__dirstamp) \
+	src/bfin/$(DEPDIR)/$(am__dirstamp)
 src/x86/$(am__dirstamp):
 	@$(MKDIR_P) src/x86
 	@: > src/x86/$(am__dirstamp)
@@ -678,6 +787,26 @@
 	src/m68k/$(DEPDIR)/$(am__dirstamp)
 src/m68k/sysv.lo: src/m68k/$(am__dirstamp) \
 	src/m68k/$(DEPDIR)/$(am__dirstamp)
+src/moxie/$(am__dirstamp):
+	@$(MKDIR_P) src/moxie
+	@: > src/moxie/$(am__dirstamp)
+src/moxie/$(DEPDIR)/$(am__dirstamp):
+	@$(MKDIR_P) src/moxie/$(DEPDIR)
+	@: > src/moxie/$(DEPDIR)/$(am__dirstamp)
+src/moxie/ffi.lo: src/moxie/$(am__dirstamp) \
+	src/moxie/$(DEPDIR)/$(am__dirstamp)
+src/moxie/eabi.lo: src/moxie/$(am__dirstamp) \
+	src/moxie/$(DEPDIR)/$(am__dirstamp)
+src/microblaze/$(am__dirstamp):
+	@$(MKDIR_P) src/microblaze
+	@: > src/microblaze/$(am__dirstamp)
+src/microblaze/$(DEPDIR)/$(am__dirstamp):
+	@$(MKDIR_P) src/microblaze/$(DEPDIR)
+	@: > src/microblaze/$(DEPDIR)/$(am__dirstamp)
+src/microblaze/ffi.lo: src/microblaze/$(am__dirstamp) \
+	src/microblaze/$(DEPDIR)/$(am__dirstamp)
+src/microblaze/sysv.lo: src/microblaze/$(am__dirstamp) \
+	src/microblaze/$(DEPDIR)/$(am__dirstamp)
 src/powerpc/$(am__dirstamp):
 	@$(MKDIR_P) src/powerpc
 	@: > src/powerpc/$(am__dirstamp)
@@ -704,6 +833,16 @@
 	src/powerpc/$(DEPDIR)/$(am__dirstamp)
 src/powerpc/darwin_closure.lo: src/powerpc/$(am__dirstamp) \
 	src/powerpc/$(DEPDIR)/$(am__dirstamp)
+src/aarch64/$(am__dirstamp):
+	@$(MKDIR_P) src/aarch64
+	@: > src/aarch64/$(am__dirstamp)
+src/aarch64/$(DEPDIR)/$(am__dirstamp):
+	@$(MKDIR_P) src/aarch64/$(DEPDIR)
+	@: > src/aarch64/$(DEPDIR)/$(am__dirstamp)
+src/aarch64/sysv.lo: src/aarch64/$(am__dirstamp) \
+	src/aarch64/$(DEPDIR)/$(am__dirstamp)
+src/aarch64/ffi.lo: src/aarch64/$(am__dirstamp) \
+	src/aarch64/$(DEPDIR)/$(am__dirstamp)
 src/arm/$(am__dirstamp):
 	@$(MKDIR_P) src/arm
 	@: > src/arm/$(am__dirstamp)
@@ -714,6 +853,8 @@
 	src/arm/$(DEPDIR)/$(am__dirstamp)
 src/arm/ffi.lo: src/arm/$(am__dirstamp) \
 	src/arm/$(DEPDIR)/$(am__dirstamp)
+src/arm/trampoline.lo: src/arm/$(am__dirstamp) \
+	src/arm/$(DEPDIR)/$(am__dirstamp)
 src/avr32/$(am__dirstamp):
 	@$(MKDIR_P) src/avr32
 	@: > src/avr32/$(am__dirstamp)
@@ -786,125 +927,91 @@
 src/pa/ffi.lo: src/pa/$(am__dirstamp) src/pa/$(DEPDIR)/$(am__dirstamp)
 src/pa/hpux32.lo: src/pa/$(am__dirstamp) \
 	src/pa/$(DEPDIR)/$(am__dirstamp)
-libffi.la: $(libffi_la_OBJECTS) $(libffi_la_DEPENDENCIES) 
-	$(libffi_la_LINK) -rpath $(libdir) $(libffi_la_OBJECTS) $(libffi_la_LIBADD) $(LIBS)
-libffi_convenience.la: $(libffi_convenience_la_OBJECTS) $(libffi_convenience_la_DEPENDENCIES) 
+src/tile/$(am__dirstamp):
+	@$(MKDIR_P) src/tile
+	@: > src/tile/$(am__dirstamp)
+src/tile/$(DEPDIR)/$(am__dirstamp):
+	@$(MKDIR_P) src/tile/$(DEPDIR)
+	@: > src/tile/$(DEPDIR)/$(am__dirstamp)
+src/tile/tile.lo: src/tile/$(am__dirstamp) \
+	src/tile/$(DEPDIR)/$(am__dirstamp)
+src/tile/ffi.lo: src/tile/$(am__dirstamp) \
+	src/tile/$(DEPDIR)/$(am__dirstamp)
+src/xtensa/$(am__dirstamp):
+	@$(MKDIR_P) src/xtensa
+	@: > src/xtensa/$(am__dirstamp)
+src/xtensa/$(DEPDIR)/$(am__dirstamp):
+	@$(MKDIR_P) src/xtensa/$(DEPDIR)
+	@: > src/xtensa/$(DEPDIR)/$(am__dirstamp)
+src/xtensa/sysv.lo: src/xtensa/$(am__dirstamp) \
+	src/xtensa/$(DEPDIR)/$(am__dirstamp)
+src/xtensa/ffi.lo: src/xtensa/$(am__dirstamp) \
+	src/xtensa/$(DEPDIR)/$(am__dirstamp)
+src/metag/$(am__dirstamp):
+	@$(MKDIR_P) src/metag
+	@: > src/metag/$(am__dirstamp)
+src/metag/$(DEPDIR)/$(am__dirstamp):
+	@$(MKDIR_P) src/metag/$(DEPDIR)
+	@: > src/metag/$(DEPDIR)/$(am__dirstamp)
+src/metag/sysv.lo: src/metag/$(am__dirstamp) \
+	src/metag/$(DEPDIR)/$(am__dirstamp)
+src/metag/ffi.lo: src/metag/$(am__dirstamp) \
+	src/metag/$(DEPDIR)/$(am__dirstamp)
+libffi.la: $(libffi_la_OBJECTS) $(libffi_la_DEPENDENCIES) $(EXTRA_libffi_la_DEPENDENCIES) 
+	$(libffi_la_LINK) -rpath $(toolexeclibdir) $(libffi_la_OBJECTS) $(libffi_la_LIBADD) $(LIBS)
+libffi_convenience.la: $(libffi_convenience_la_OBJECTS) $(libffi_convenience_la_DEPENDENCIES) $(EXTRA_libffi_convenience_la_DEPENDENCIES) 
 	$(LINK)  $(libffi_convenience_la_OBJECTS) $(libffi_convenience_la_LIBADD) $(LIBS)
 
 mostlyclean-compile:
 	-rm -f *.$(OBJEXT)
-	-rm -f src/alpha/ffi.$(OBJEXT)
-	-rm -f src/alpha/ffi.lo
-	-rm -f src/alpha/osf.$(OBJEXT)
-	-rm -f src/alpha/osf.lo
-	-rm -f src/arm/ffi.$(OBJEXT)
-	-rm -f src/arm/ffi.lo
-	-rm -f src/arm/sysv.$(OBJEXT)
-	-rm -f src/arm/sysv.lo
-	-rm -f src/avr32/ffi.$(OBJEXT)
-	-rm -f src/avr32/ffi.lo
-	-rm -f src/avr32/sysv.$(OBJEXT)
-	-rm -f src/avr32/sysv.lo
-	-rm -f src/closures.$(OBJEXT)
-	-rm -f src/closures.lo
-	-rm -f src/cris/ffi.$(OBJEXT)
-	-rm -f src/cris/ffi.lo
-	-rm -f src/cris/sysv.$(OBJEXT)
-	-rm -f src/cris/sysv.lo
-	-rm -f src/debug.$(OBJEXT)
-	-rm -f src/debug.lo
-	-rm -f src/frv/eabi.$(OBJEXT)
-	-rm -f src/frv/eabi.lo
-	-rm -f src/frv/ffi.$(OBJEXT)
-	-rm -f src/frv/ffi.lo
-	-rm -f src/ia64/ffi.$(OBJEXT)
-	-rm -f src/ia64/ffi.lo
-	-rm -f src/ia64/unix.$(OBJEXT)
-	-rm -f src/ia64/unix.lo
-	-rm -f src/java_raw_api.$(OBJEXT)
-	-rm -f src/java_raw_api.lo
-	-rm -f src/m32r/ffi.$(OBJEXT)
-	-rm -f src/m32r/ffi.lo
-	-rm -f src/m32r/sysv.$(OBJEXT)
-	-rm -f src/m32r/sysv.lo
-	-rm -f src/m68k/ffi.$(OBJEXT)
-	-rm -f src/m68k/ffi.lo
-	-rm -f src/m68k/sysv.$(OBJEXT)
-	-rm -f src/m68k/sysv.lo
-	-rm -f src/mips/ffi.$(OBJEXT)
-	-rm -f src/mips/ffi.lo
-	-rm -f src/mips/n32.$(OBJEXT)
-	-rm -f src/mips/n32.lo
-	-rm -f src/mips/o32.$(OBJEXT)
-	-rm -f src/mips/o32.lo
-	-rm -f src/pa/ffi.$(OBJEXT)
-	-rm -f src/pa/ffi.lo
-	-rm -f src/pa/hpux32.$(OBJEXT)
-	-rm -f src/pa/hpux32.lo
-	-rm -f src/pa/linux.$(OBJEXT)
-	-rm -f src/pa/linux.lo
-	-rm -f src/powerpc/aix.$(OBJEXT)
-	-rm -f src/powerpc/aix.lo
-	-rm -f src/powerpc/aix_closure.$(OBJEXT)
-	-rm -f src/powerpc/aix_closure.lo
-	-rm -f src/powerpc/darwin.$(OBJEXT)
-	-rm -f src/powerpc/darwin.lo
-	-rm -f src/powerpc/darwin_closure.$(OBJEXT)
-	-rm -f src/powerpc/darwin_closure.lo
-	-rm -f src/powerpc/ffi.$(OBJEXT)
-	-rm -f src/powerpc/ffi.lo
-	-rm -f src/powerpc/ffi_darwin.$(OBJEXT)
-	-rm -f src/powerpc/ffi_darwin.lo
-	-rm -f src/powerpc/linux64.$(OBJEXT)
-	-rm -f src/powerpc/linux64.lo
-	-rm -f src/powerpc/linux64_closure.$(OBJEXT)
-	-rm -f src/powerpc/linux64_closure.lo
-	-rm -f src/powerpc/ppc_closure.$(OBJEXT)
-	-rm -f src/powerpc/ppc_closure.lo
-	-rm -f src/powerpc/sysv.$(OBJEXT)
-	-rm -f src/powerpc/sysv.lo
-	-rm -f src/prep_cif.$(OBJEXT)
-	-rm -f src/prep_cif.lo
-	-rm -f src/raw_api.$(OBJEXT)
-	-rm -f src/raw_api.lo
-	-rm -f src/s390/ffi.$(OBJEXT)
-	-rm -f src/s390/ffi.lo
-	-rm -f src/s390/sysv.$(OBJEXT)
-	-rm -f src/s390/sysv.lo
-	-rm -f src/sh/ffi.$(OBJEXT)
-	-rm -f src/sh/ffi.lo
-	-rm -f src/sh/sysv.$(OBJEXT)
-	-rm -f src/sh/sysv.lo
-	-rm -f src/sh64/ffi.$(OBJEXT)
-	-rm -f src/sh64/ffi.lo
-	-rm -f src/sh64/sysv.$(OBJEXT)
-	-rm -f src/sh64/sysv.lo
-	-rm -f src/sparc/ffi.$(OBJEXT)
-	-rm -f src/sparc/ffi.lo
-	-rm -f src/sparc/v8.$(OBJEXT)
-	-rm -f src/sparc/v8.lo
-	-rm -f src/sparc/v9.$(OBJEXT)
-	-rm -f src/sparc/v9.lo
-	-rm -f src/types.$(OBJEXT)
-	-rm -f src/types.lo
-	-rm -f src/x86/darwin.$(OBJEXT)
-	-rm -f src/x86/darwin.lo
-	-rm -f src/x86/darwin64.$(OBJEXT)
-	-rm -f src/x86/darwin64.lo
-	-rm -f src/x86/ffi.$(OBJEXT)
-	-rm -f src/x86/ffi.lo
-	-rm -f src/x86/ffi64.$(OBJEXT)
-	-rm -f src/x86/ffi64.lo
-	-rm -f src/x86/freebsd.$(OBJEXT)
-	-rm -f src/x86/freebsd.lo
-	-rm -f src/x86/sysv.$(OBJEXT)
-	-rm -f src/x86/sysv.lo
-	-rm -f src/x86/unix64.$(OBJEXT)
-	-rm -f src/x86/unix64.lo
-	-rm -f src/x86/win32.$(OBJEXT)
-	-rm -f src/x86/win32.lo
-	-rm -f src/x86/win64.$(OBJEXT)
-	-rm -f src/x86/win64.lo
+	-rm -f src/*.$(OBJEXT)
+	-rm -f src/*.lo
+	-rm -f src/aarch64/*.$(OBJEXT)
+	-rm -f src/aarch64/*.lo
+	-rm -f src/alpha/*.$(OBJEXT)
+	-rm -f src/alpha/*.lo
+	-rm -f src/arm/*.$(OBJEXT)
+	-rm -f src/arm/*.lo
+	-rm -f src/avr32/*.$(OBJEXT)
+	-rm -f src/avr32/*.lo
+	-rm -f src/bfin/*.$(OBJEXT)
+	-rm -f src/bfin/*.lo
+	-rm -f src/cris/*.$(OBJEXT)
+	-rm -f src/cris/*.lo
+	-rm -f src/frv/*.$(OBJEXT)
+	-rm -f src/frv/*.lo
+	-rm -f src/ia64/*.$(OBJEXT)
+	-rm -f src/ia64/*.lo
+	-rm -f src/m32r/*.$(OBJEXT)
+	-rm -f src/m32r/*.lo
+	-rm -f src/m68k/*.$(OBJEXT)
+	-rm -f src/m68k/*.lo
+	-rm -f src/metag/*.$(OBJEXT)
+	-rm -f src/metag/*.lo
+	-rm -f src/microblaze/*.$(OBJEXT)
+	-rm -f src/microblaze/*.lo
+	-rm -f src/mips/*.$(OBJEXT)
+	-rm -f src/mips/*.lo
+	-rm -f src/moxie/*.$(OBJEXT)
+	-rm -f src/moxie/*.lo
+	-rm -f src/pa/*.$(OBJEXT)
+	-rm -f src/pa/*.lo
+	-rm -f src/powerpc/*.$(OBJEXT)
+	-rm -f src/powerpc/*.lo
+	-rm -f src/s390/*.$(OBJEXT)
+	-rm -f src/s390/*.lo
+	-rm -f src/sh/*.$(OBJEXT)
+	-rm -f src/sh/*.lo
+	-rm -f src/sh64/*.$(OBJEXT)
+	-rm -f src/sh64/*.lo
+	-rm -f src/sparc/*.$(OBJEXT)
+	-rm -f src/sparc/*.lo
+	-rm -f src/tile/*.$(OBJEXT)
+	-rm -f src/tile/*.lo
+	-rm -f src/x86/*.$(OBJEXT)
+	-rm -f src/x86/*.lo
+	-rm -f src/xtensa/*.$(OBJEXT)
+	-rm -f src/xtensa/*.lo
 
 distclean-compile:
 	-rm -f *.tab.c
@@ -915,12 +1022,17 @@
 @AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/prep_cif.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/raw_api.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/types.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/aarch64/$(DEPDIR)/ffi.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/aarch64/$(DEPDIR)/sysv.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/alpha/$(DEPDIR)/ffi.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/alpha/$(DEPDIR)/osf.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/arm/$(DEPDIR)/ffi.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/arm/$(DEPDIR)/sysv.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/arm/$(DEPDIR)/trampoline.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/avr32/$(DEPDIR)/ffi.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/avr32/$(DEPDIR)/sysv.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/bfin/$(DEPDIR)/ffi.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/bfin/$(DEPDIR)/sysv.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/cris/$(DEPDIR)/ffi.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/cris/$(DEPDIR)/sysv.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/frv/$(DEPDIR)/eabi.Plo@am__quote@
@@ -931,9 +1043,15 @@
 @AMDEP_TRUE@@am__include@ @am__quote@src/m32r/$(DEPDIR)/sysv.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/m68k/$(DEPDIR)/ffi.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/m68k/$(DEPDIR)/sysv.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/metag/$(DEPDIR)/ffi.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/metag/$(DEPDIR)/sysv.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/microblaze/$(DEPDIR)/ffi.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/microblaze/$(DEPDIR)/sysv.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/mips/$(DEPDIR)/ffi.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/mips/$(DEPDIR)/n32.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/mips/$(DEPDIR)/o32.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/moxie/$(DEPDIR)/eabi.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/moxie/$(DEPDIR)/ffi.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/pa/$(DEPDIR)/ffi.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/pa/$(DEPDIR)/hpux32.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/pa/$(DEPDIR)/linux.Plo@am__quote@
@@ -956,6 +1074,8 @@
 @AMDEP_TRUE@@am__include@ @am__quote@src/sparc/$(DEPDIR)/ffi.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/sparc/$(DEPDIR)/v8.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/sparc/$(DEPDIR)/v9.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/tile/$(DEPDIR)/ffi.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/tile/$(DEPDIR)/tile.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/x86/$(DEPDIR)/darwin.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/x86/$(DEPDIR)/darwin64.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/x86/$(DEPDIR)/ffi.Plo@am__quote@
@@ -965,6 +1085,8 @@
 @AMDEP_TRUE@@am__include@ @am__quote@src/x86/$(DEPDIR)/unix64.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/x86/$(DEPDIR)/win32.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/x86/$(DEPDIR)/win64.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/xtensa/$(DEPDIR)/ffi.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/xtensa/$(DEPDIR)/sysv.Plo@am__quote@
 
 .S.o:
 @am__fastdepCCAS_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
@@ -1020,22 +1142,29 @@
 clean-libtool:
 	-rm -rf .libs _libs
 	-rm -rf src/.libs src/_libs
+	-rm -rf src/aarch64/.libs src/aarch64/_libs
 	-rm -rf src/alpha/.libs src/alpha/_libs
 	-rm -rf src/arm/.libs src/arm/_libs
 	-rm -rf src/avr32/.libs src/avr32/_libs
+	-rm -rf src/bfin/.libs src/bfin/_libs
 	-rm -rf src/cris/.libs src/cris/_libs
 	-rm -rf src/frv/.libs src/frv/_libs
 	-rm -rf src/ia64/.libs src/ia64/_libs
 	-rm -rf src/m32r/.libs src/m32r/_libs
 	-rm -rf src/m68k/.libs src/m68k/_libs
+	-rm -rf src/metag/.libs src/metag/_libs
+	-rm -rf src/microblaze/.libs src/microblaze/_libs
 	-rm -rf src/mips/.libs src/mips/_libs
+	-rm -rf src/moxie/.libs src/moxie/_libs
 	-rm -rf src/pa/.libs src/pa/_libs
 	-rm -rf src/powerpc/.libs src/powerpc/_libs
 	-rm -rf src/s390/.libs src/s390/_libs
 	-rm -rf src/sh/.libs src/sh/_libs
 	-rm -rf src/sh64/.libs src/sh64/_libs
 	-rm -rf src/sparc/.libs src/sparc/_libs
+	-rm -rf src/tile/.libs src/tile/_libs
 	-rm -rf src/x86/.libs src/x86/_libs
+	-rm -rf src/xtensa/.libs src/xtensa/_libs
 
 distclean-libtool:
 	-rm -f libtool config.lt
@@ -1068,12 +1197,12 @@
 doc/libffi.dvi: doc/libffi.texi $(srcdir)/doc/version.texi doc/$(am__dirstamp)
 	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
-	$(TEXI2DVI) -o $@ `test -f 'doc/libffi.texi' || echo '$(srcdir)/'`doc/libffi.texi
+	$(TEXI2DVI)  --clean -o $@ `test -f 'doc/libffi.texi' || echo '$(srcdir)/'`doc/libffi.texi 
 
 doc/libffi.pdf: doc/libffi.texi $(srcdir)/doc/version.texi doc/$(am__dirstamp)
 	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
-	$(TEXI2PDF) -o $@ `test -f 'doc/libffi.texi' || echo '$(srcdir)/'`doc/libffi.texi
+	$(TEXI2PDF)  --clean -o $@ `test -f 'doc/libffi.texi' || echo '$(srcdir)/'`doc/libffi.texi 
 
 doc/libffi.html: doc/libffi.texi $(srcdir)/doc/version.texi doc/$(am__dirstamp)
 	rm -rf $(@:.html=.htp)
@@ -1110,7 +1239,7 @@
 @MAINTAINER_MODE_TRUE@	-rm -f $(srcdir)/doc/stamp-vti $(srcdir)/doc/version.texi
 .dvi.ps:
 	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
-	$(DVIPS) -o $@ $<
+	$(DVIPS)  -o $@ $<
 
 uninstall-dvi-am:
 	@$(NORMAL_UNINSTALL)
@@ -1132,9 +1261,7 @@
 
 uninstall-info-am:
 	@$(PRE_UNINSTALL)
-	@if test -d '$(DESTDIR)$(infodir)' && \
-	    (install-info --version && \
-	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
+	@if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
 	  list='$(INFO_DEPS)'; \
 	  for file in $$list; do \
 	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
@@ -1206,8 +1333,11 @@
 	done
 install-pkgconfigDATA: $(pkgconfig_DATA)
 	@$(NORMAL_INSTALL)
-	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
 	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
+	fi; \
 	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; \
@@ -1221,18 +1351,16 @@
 	@$(NORMAL_UNINSTALL)
 	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
 	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$files" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files
+	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
 
 # This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-	@failcom='exit 1'; \
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
+	@fail= failcom='exit 1'; \
 	for f in x $$MAKEFLAGS; do \
 	  case $$f in \
 	    *=* | --[!k]*);; \
@@ -1241,7 +1369,11 @@
 	done; \
 	dot_seen=no; \
 	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
 	  echo "Making $$target in $$subdir"; \
 	  if test "$$subdir" = "."; then \
 	    dot_seen=yes; \
@@ -1255,37 +1387,6 @@
 	if test "$$dot_seen" = "no"; then \
 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 	fi; test -z "$$fail"
-
-$(RECURSIVE_CLEAN_TARGETS):
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
@@ -1294,6 +1395,10 @@
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
+cscopelist-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
+	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -1357,8 +1462,32 @@
 	  && $(am__cd) $(top_srcdir) \
 	  && gtags -i $(GTAGS_ARGS) "$$here"
 
+cscope: cscope.files
+	test ! -s cscope.files \
+	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+
+clean-cscope:
+	-rm -f cscope.files
+
+cscope.files: clean-cscope cscopelist-recursive cscopelist
+
+cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS) $(LISP)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
 
 distdir: $(DISTFILES)
 	$(am__remove_distdir)
@@ -1394,13 +1523,10 @@
 	done
 	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
-	    test -d "$(distdir)/$$subdir" \
-	    || $(MKDIR_P) "$(distdir)/$$subdir" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
 	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 	    $(am__relativize); \
 	    new_distdir=$$reldir; \
@@ -1424,43 +1550,44 @@
 	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
 	  dist-info
 	-test -n "$(am__skip_mode_fix)" \
-	|| find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
 	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
 	|| chmod -R a+r "$(distdir)"
 dist-gzip: distdir
 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
+	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+	$(am__post_remove_distdir)
 
-dist-lzma: distdir
-	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
-	$(am__remove_distdir)
+dist-lzip: distdir
+	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+	$(am__post_remove_distdir)
 
 dist-xz: distdir
-	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
-	$(am__remove_distdir)
+	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+	$(am__post_remove_distdir)
 
 dist-tarZ: distdir
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-shar: distdir
 	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-zip: distdir
 	-rm -f $(distdir).zip
 	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
-dist dist-all: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
+dist dist-all:
+	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+	$(am__post_remove_distdir)
 
 # This target untars the dist file and tries a VPATH configuration.  Then
 # it guarantees that the distribution is self-contained by making another
@@ -1468,21 +1595,21 @@
 distcheck: dist
 	case '$(DIST_ARCHIVES)' in \
 	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
-	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.lzma*) \
-	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lz*) \
+	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
 	*.tar.xz*) \
 	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
 	*.tar.Z*) \
 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
 	*.zip*) \
 	  unzip $(distdir).zip ;;\
 	esac
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	chmod -R a-w $(distdir); chmod u+w $(distdir)
 	mkdir $(distdir)/_build
 	mkdir $(distdir)/_inst
 	chmod a-w $(distdir)
@@ -1492,6 +1619,7 @@
 	  && am__cwd=`pwd` \
 	  && $(am__cd) $(distdir)/_build \
 	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
@@ -1515,13 +1643,21 @@
 	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
 	  && cd "$$am__cwd" \
 	  || exit 1
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 	@(echo "$(distdir) archives ready for distribution: "; \
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 distuninstallcheck:
-	@$(am__cd) '$(distuninstallcheck_dir)' \
-	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	@test -n '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: trying to run $@ with an empty' \
+	       '$$(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	$(am__cd) '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
 	   || { echo "ERROR: files left after uninstall:" ; \
 	        if test -n "$(DESTDIR)"; then \
 	          echo "  (check DESTDIR support)"; \
@@ -1542,7 +1678,7 @@
 all-am: Makefile $(INFO_DEPS) $(LTLIBRARIES) $(DATA) fficonfig.h
 installdirs: installdirs-recursive
 installdirs-am:
-	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(pkgconfigdir)"; do \
+	for dir in "$(DESTDIR)$(toolexeclibdir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(pkgconfigdir)"; do \
 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-recursive
@@ -1555,10 +1691,15 @@
 
 installcheck: installcheck-recursive
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
@@ -1569,12 +1710,16 @@
 	-rm -f doc/$(am__dirstamp)
 	-rm -f src/$(DEPDIR)/$(am__dirstamp)
 	-rm -f src/$(am__dirstamp)
+	-rm -f src/aarch64/$(DEPDIR)/$(am__dirstamp)
+	-rm -f src/aarch64/$(am__dirstamp)
 	-rm -f src/alpha/$(DEPDIR)/$(am__dirstamp)
 	-rm -f src/alpha/$(am__dirstamp)
 	-rm -f src/arm/$(DEPDIR)/$(am__dirstamp)
 	-rm -f src/arm/$(am__dirstamp)
 	-rm -f src/avr32/$(DEPDIR)/$(am__dirstamp)
 	-rm -f src/avr32/$(am__dirstamp)
+	-rm -f src/bfin/$(DEPDIR)/$(am__dirstamp)
+	-rm -f src/bfin/$(am__dirstamp)
 	-rm -f src/cris/$(DEPDIR)/$(am__dirstamp)
 	-rm -f src/cris/$(am__dirstamp)
 	-rm -f src/frv/$(DEPDIR)/$(am__dirstamp)
@@ -1585,8 +1730,14 @@
 	-rm -f src/m32r/$(am__dirstamp)
 	-rm -f src/m68k/$(DEPDIR)/$(am__dirstamp)
 	-rm -f src/m68k/$(am__dirstamp)
+	-rm -f src/metag/$(DEPDIR)/$(am__dirstamp)
+	-rm -f src/metag/$(am__dirstamp)
+	-rm -f src/microblaze/$(DEPDIR)/$(am__dirstamp)
+	-rm -f src/microblaze/$(am__dirstamp)
 	-rm -f src/mips/$(DEPDIR)/$(am__dirstamp)
 	-rm -f src/mips/$(am__dirstamp)
+	-rm -f src/moxie/$(DEPDIR)/$(am__dirstamp)
+	-rm -f src/moxie/$(am__dirstamp)
 	-rm -f src/pa/$(DEPDIR)/$(am__dirstamp)
 	-rm -f src/pa/$(am__dirstamp)
 	-rm -f src/powerpc/$(DEPDIR)/$(am__dirstamp)
@@ -1599,20 +1750,25 @@
 	-rm -f src/sh64/$(am__dirstamp)
 	-rm -f src/sparc/$(DEPDIR)/$(am__dirstamp)
 	-rm -f src/sparc/$(am__dirstamp)
+	-rm -f src/tile/$(DEPDIR)/$(am__dirstamp)
+	-rm -f src/tile/$(am__dirstamp)
 	-rm -f src/x86/$(DEPDIR)/$(am__dirstamp)
 	-rm -f src/x86/$(am__dirstamp)
+	-rm -f src/xtensa/$(DEPDIR)/$(am__dirstamp)
+	-rm -f src/xtensa/$(am__dirstamp)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
 	@echo "it deletes files that may require special tools to rebuild."
 clean: clean-recursive
 
-clean-am: clean-aminfo clean-generic clean-libLTLIBRARIES \
-	clean-libtool clean-noinstLTLIBRARIES mostlyclean-am
+clean-am: clean-aminfo clean-generic clean-libtool \
+	clean-noinstLTLIBRARIES clean-toolexeclibLTLIBRARIES \
+	mostlyclean-am
 
 distclean: distclean-recursive
 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf src/$(DEPDIR) src/alpha/$(DEPDIR) src/arm/$(DEPDIR) src/avr32/$(DEPDIR) src/cris/$(DEPDIR) src/frv/$(DEPDIR) src/ia64/$(DEPDIR) src/m32r/$(DEPDIR) src/m68k/$(DEPDIR) src/mips/$(DEPDIR) src/pa/$(DEPDIR) src/powerpc/$(DEPDIR) src/s390/$(DEPDIR) src/sh/$(DEPDIR) src/sh64/$(DEPDIR) src/sparc/$(DEPDIR) src/x86/$(DEPDIR)
+	-rm -rf src/$(DEPDIR) src/aarch64/$(DEPDIR) src/alpha/$(DEPDIR) src/arm/$(DEPDIR) src/avr32/$(DEPDIR) src/bfin/$(DEPDIR) src/cris/$(DEPDIR) src/frv/$(DEPDIR) src/ia64/$(DEPDIR) src/m32r/$(DEPDIR) src/m68k/$(DEPDIR) src/metag/$(DEPDIR) src/microblaze/$(DEPDIR) src/mips/$(DEPDIR) src/moxie/$(DEPDIR) src/pa/$(DEPDIR) src/powerpc/$(DEPDIR) src/s390/$(DEPDIR) src/sh/$(DEPDIR) src/sh64/$(DEPDIR) src/sparc/$(DEPDIR) src/tile/$(DEPDIR) src/x86/$(DEPDIR) src/xtensa/$(DEPDIR)
 	-rm -f Makefile
 distclean-am: clean-am distclean-compile distclean-generic \
 	distclean-hdr distclean-libtool distclean-tags
@@ -1635,8 +1791,11 @@
 
 install-dvi-am: $(DVIS)
 	@$(NORMAL_INSTALL)
-	test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
 	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
+	fi; \
 	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; \
@@ -1645,22 +1804,28 @@
 	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
 	  $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
 	done
-install-exec-am: install-libLTLIBRARIES
+install-exec-am: install-toolexeclibLTLIBRARIES
+
+install-html: install-html-recursive
 
 install-html-am: $(HTMLS)
 	@$(NORMAL_INSTALL)
-	test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
 	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
+	fi; \
 	for p in $$list; do \
 	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  $(am__strip_dir) \
-	  if test -d "$$d$$p"; then \
+	  d2=$$d$$p; \
+	  if test -d "$$d2"; then \
 	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
 	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
-	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
+	    echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
 	  else \
-	    list2="$$list2 $$d$$p"; \
+	    list2="$$list2 $$d2"; \
 	  fi; \
 	done; \
 	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
@@ -1672,9 +1837,12 @@
 
 install-info-am: $(INFO_DEPS)
 	@$(NORMAL_INSTALL)
-	test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
 	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
 	list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
+	fi; \
 	for file in $$list; do \
 	  case $$file in \
 	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
@@ -1692,8 +1860,7 @@
 	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
 	  $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
 	@$(POST_INSTALL)
-	@if (install-info --version && \
-	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
+	@if $(am__can_run_installinfo); then \
 	  list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
 	  for file in $$list; do \
 	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
@@ -1703,10 +1870,15 @@
 	else : ; fi
 install-man:
 
+install-pdf: install-pdf-recursive
+
 install-pdf-am: $(PDFS)
 	@$(NORMAL_INSTALL)
-	test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
 	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
+	fi; \
 	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; \
@@ -1718,8 +1890,11 @@
 
 install-ps-am: $(PSS)
 	@$(NORMAL_INSTALL)
-	test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
 	@list='$(PSS)'; test -n "$(psdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
+	fi; \
 	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; \
@@ -1732,7 +1907,7 @@
 maintainer-clean: maintainer-clean-recursive
 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
 	-rm -rf $(top_srcdir)/autom4te.cache
-	-rm -rf src/$(DEPDIR) src/alpha/$(DEPDIR) src/arm/$(DEPDIR) src/avr32/$(DEPDIR) src/cris/$(DEPDIR) src/frv/$(DEPDIR) src/ia64/$(DEPDIR) src/m32r/$(DEPDIR) src/m68k/$(DEPDIR) src/mips/$(DEPDIR) src/pa/$(DEPDIR) src/powerpc/$(DEPDIR) src/s390/$(DEPDIR) src/sh/$(DEPDIR) src/sh64/$(DEPDIR) src/sparc/$(DEPDIR) src/x86/$(DEPDIR)
+	-rm -rf src/$(DEPDIR) src/aarch64/$(DEPDIR) src/alpha/$(DEPDIR) src/arm/$(DEPDIR) src/avr32/$(DEPDIR) src/bfin/$(DEPDIR) src/cris/$(DEPDIR) src/frv/$(DEPDIR) src/ia64/$(DEPDIR) src/m32r/$(DEPDIR) src/m68k/$(DEPDIR) src/metag/$(DEPDIR) src/microblaze/$(DEPDIR) src/mips/$(DEPDIR) src/moxie/$(DEPDIR) src/pa/$(DEPDIR) src/powerpc/$(DEPDIR) src/s390/$(DEPDIR) src/sh/$(DEPDIR) src/sh64/$(DEPDIR) src/sparc/$(DEPDIR) src/tile/$(DEPDIR) src/x86/$(DEPDIR) src/xtensa/$(DEPDIR)
 	-rm -f Makefile
 maintainer-clean-am: distclean-am maintainer-clean-aminfo \
 	maintainer-clean-generic maintainer-clean-vti
@@ -1751,41 +1926,39 @@
 ps-am: $(PSS)
 
 uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
-	uninstall-libLTLIBRARIES uninstall-pdf-am \
-	uninstall-pkgconfigDATA uninstall-ps-am
+	uninstall-pdf-am uninstall-pkgconfigDATA uninstall-ps-am \
+	uninstall-toolexeclibLTLIBRARIES
 
 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
-	ctags-recursive install-am install-strip tags-recursive
+	cscopelist-recursive ctags-recursive install-am install-strip \
+	tags-recursive
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am am--refresh check check-am clean clean-aminfo \
-	clean-generic clean-libLTLIBRARIES clean-libtool \
-	clean-noinstLTLIBRARIES ctags ctags-recursive dist dist-all \
-	dist-bzip2 dist-gzip dist-info dist-lzma dist-shar dist-tarZ \
-	dist-xz dist-zip distcheck distclean distclean-compile \
-	distclean-generic distclean-hdr distclean-libtool \
-	distclean-tags distcleancheck distdir distuninstallcheck dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-libLTLIBRARIES \
-	install-man install-pdf install-pdf-am install-pkgconfigDATA \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installdirs installdirs-am maintainer-clean \
-	maintainer-clean-aminfo maintainer-clean-generic \
-	maintainer-clean-vti mostlyclean mostlyclean-aminfo \
-	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-vti pdf pdf-am ps ps-am tags tags-recursive \
-	uninstall uninstall-am uninstall-dvi-am uninstall-html-am \
-	uninstall-info-am uninstall-libLTLIBRARIES uninstall-pdf-am \
-	uninstall-pkgconfigDATA uninstall-ps-am
+	clean-cscope clean-generic clean-libtool \
+	clean-noinstLTLIBRARIES clean-toolexeclibLTLIBRARIES cscope \
+	cscopelist cscopelist-recursive ctags ctags-recursive dist \
+	dist-all dist-bzip2 dist-gzip dist-info dist-lzip dist-shar \
+	dist-tarZ dist-xz dist-zip distcheck distclean \
+	distclean-compile distclean-generic distclean-hdr \
+	distclean-libtool distclean-tags distcleancheck distdir \
+	distuninstallcheck dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-pkgconfigDATA install-ps \
+	install-ps-am install-strip install-toolexeclibLTLIBRARIES \
+	installcheck installcheck-am installdirs installdirs-am \
+	maintainer-clean maintainer-clean-aminfo \
+	maintainer-clean-generic maintainer-clean-vti mostlyclean \
+	mostlyclean-aminfo mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-vti pdf pdf-am ps ps-am tags \
+	tags-recursive uninstall uninstall-am uninstall-dvi-am \
+	uninstall-html-am uninstall-info-am uninstall-pdf-am \
+	uninstall-pkgconfigDATA uninstall-ps-am \
+	uninstall-toolexeclibLTLIBRARIES
 
 
-# No install-html or install-pdf support in automake yet
-.PHONY: install-html install-pdf
-install-html:
-install-pdf:
-
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/Modules/_ctypes/libffi/README b/Modules/_ctypes/libffi/README
index 167de42..19156fe 100644
--- a/Modules/_ctypes/libffi/README
+++ b/Modules/_ctypes/libffi/README
@@ -1,7 +1,7 @@
 Status
 ======
 
-libffi-3.0.10 was released on XXXXXXXXXX, 2010. Check the libffi web
+libffi-3.0.13 was released on March 17, 2013.  Check the libffi web
 page for updates: <URL:http://sourceware.org/libffi/>.
 
 
@@ -43,46 +43,70 @@
 For specific configuration details and testing status, please
 refer to the wiki page here:
 
- http://www.moxielogic.org/wiki/index.php?title=Libffi_3.0.10
+ http://www.moxielogic.org/wiki/index.php?title=Libffi_3.0.13
 
 At the time of release, the following basic configurations have been
 tested:
 
-|--------------+------------------|
-| Architecture | Operating System |
-|--------------+------------------|
-| Alpha        | Linux            |
-| Alpha        | Tru64            |
-| ARM          | Linux            |
-| AVR32        | Linux            |
-| HPPA         | HPUX             |
-| IA-64        | Linux            |
-| MIPS         | IRIX             |
-| MIPS         | Linux            |
-| MIPS64       | Linux            |
-| PowerPC      | Linux            |
-| PowerPC      | Mac OSX          |
-| PowerPC      | FreeBSD          |
-| PowerPC64    | Linux            |
-| S390         | Linux            |
-| S390X        | Linux            |
-| SPARC        | Linux            |
-| SPARC        | Solaris          |
-| SPARC64      | Linux            |
-| SPARC64      | FreeBSD          |
-| X86          | FreeBSD          |
-| X86          | kFreeBSD         |
-| X86          | Linux            |
-| X86          | Mac OSX          |
-| X86          | OpenBSD          |
-| X86          | Solaris          |
-| X86          | Windows/Cygwin   |
-| X86          | Windows/MingW    |
-| X86-64       | FreeBSD          |
-| X86-64       | Linux            |
-| X86-64       | OpenBSD          |
-| X86-64       | Windows/MingW    |
-|--------------+------------------|
+|-----------------+------------------+-------------------------|
+| Architecture    | Operating System | Compiler                |
+|-----------------+------------------+-------------------------|
+| AArch64         | Linux            | GCC                     |
+| Alpha           | Linux            | GCC                     |
+| Alpha           | Tru64            | GCC                     |
+| ARM             | Linux            | GCC                     |
+| ARM             | iOS              | GCC                     |
+| AVR32           | Linux            | GCC                     |
+| Blackfin        | uClinux          | GCC                     |
+| HPPA            | HPUX             | GCC                     |
+| IA-64           | Linux            | GCC                     |
+| M68K            | FreeMiNT         | GCC                     |
+| M68K            | Linux	     | GCC                     |
+| M68K            | RTEMS            | GCC                     |
+| Meta            | Linux            | GCC                     |
+| MicroBlaze      | Linux            | GCC                     |
+| MIPS            | IRIX             | GCC                     |
+| MIPS            | Linux            | GCC                     |
+| MIPS            | RTEMS            | GCC                     |
+| MIPS64          | Linux            | GCC                     |
+| Moxie		  | Bare metal	     | GCC
+| PowerPC 32-bit  | AIX              | IBM XL C                |
+| PowerPC 64-bit  | AIX              | IBM XL C                |
+| PowerPC         | AMIGA            | GCC                     |
+| PowerPC         | Linux            | GCC                     |
+| PowerPC         | Mac OSX          | GCC                     |
+| PowerPC         | FreeBSD          | GCC                     |
+| PowerPC 64-bit  | FreeBSD          | GCC                     |
+| PowerPC 64-bit  | Linux            | GCC                     |
+| S390            | Linux            | GCC                     |
+| S390X           | Linux            | GCC                     |
+| SPARC           | Linux            | GCC                     |
+| SPARC           | Solaris          | GCC                     |
+| SPARC           | Solaris          | Oracle Solaris Studio C |
+| SPARC64         | Linux            | GCC                     |
+| SPARC64         | FreeBSD          | GCC                     |
+| SPARC64         | Solaris          | Oracle Solaris Studio C |
+| TILE-Gx/TILEPro | Linux            | GCC                     |
+| X86             | FreeBSD          | GCC                     |
+| X86             | GNU HURD         | GCC                     |
+| X86             | Interix          | GCC                     |
+| X86             | kFreeBSD         | GCC                     |
+| X86             | Linux            | GCC                     |
+| X86             | Mac OSX          | GCC                     |
+| X86             | OpenBSD          | GCC                     |
+| X86             | OS/2             | GCC                     |
+| X86             | Solaris          | GCC                     |
+| X86             | Solaris          | Oracle Solaris Studio C |
+| X86             | Windows/Cygwin   | GCC                     |
+| X86             | Windows/MingW    | GCC                     |
+| X86-64          | FreeBSD          | GCC                     |
+| X86-64          | Linux            | GCC                     |
+| X86-64          | Linux/x32        | GCC                     |
+| X86-64          | OpenBSD          | GCC                     |
+| X86-64          | Solaris          | Oracle Solaris Studio C |
+| X86-64          | Windows/MingW    | GCC                     |
+| Xtensa          | Linux            | GCC                     |
+|-----------------+------------------+-------------------------|
 
 Please send additional platform test results to
 libffi-discuss@sourceware.org and feel free to update the wiki page
@@ -113,14 +137,20 @@
 Microsoft's Visual C++ compiler.  In this case, use the msvcc.sh
 wrapper script during configuration like so:
 
-path/to/configure --enable-shared --enable-static \
-	CC=path/to/msvcc.sh LD=link \
-	CPP=\"cl -nologo -EP\"
+path/to/configure CC=path/to/msvcc.sh LD=link CPP=\"cl -nologo -EP\"
+
+For 64-bit Windows builds, use CC="path/to/msvcc.sh -m64".
+You may also need to specify --build appropriately. When building with MSVC
+under a MingW environment, you may need to remove the line in configure
+that sets 'fix_srcfile_path' to a 'cygpath' command. ('cygpath' is not
+present in MingW, and is not required when using MingW-style paths.)
+
+For iOS builds, the 'libffi.xcodeproj' Xcode project is available.
 
 Configure has many other options. Use "configure --help" to see them all.
 
 Once configure has finished, type "make". Note that you must be using
-GNU make.  You can ftp GNU make from prep.ai.mit.edu:/pub/gnu.
+GNU make.  You can ftp GNU make from ftp.gnu.org:/pub/gnu/make .
 
 To ensure that libffi is working as advertised, type "make check".
 This will require that you have DejaGNU installed.
@@ -133,11 +163,53 @@
 
 See the ChangeLog files for details.
 
-3.0.10 ???-??-??
-        Fix the N64 build on mips-sgi-irix6.5.
-	Testsuite fixes for Tru64 Unix.
+3.0.13 Mar-17-13
+	Add Meta support.
+	Add missing Moxie bits.
+	Fix stack alignment bug on 32-bit x86.
+	Build fix for m68000 targets.
+	Build fix for soft-float Power targets.
+	Fix the install dir location for some platforms when building
+	  with GCC (OS X, Solaris).
+	Fix Cygwin regression.
+
+3.0.12 Feb-11-13
+        Add Moxie support.
+	Add AArch64 support.
+	Add Blackfin support.
+	Add TILE-Gx/TILEPro support.
+	Add MicroBlaze support.
+	Add Xtensa support.
+	Add support for PaX enabled kernels with MPROTECT.
+	Add support for native vendor compilers on
+	  Solaris and AIX.
+	Work around LLVM/GCC interoperability issue on x86_64.
+
+3.0.11 Apr-11-12
+        Lots of build fixes.
+	Add Amiga newer MacOS support.
+	Add support for variadic functions (ffi_prep_cif_var).
+	Add Linux/x32 support.
+	Add thiscall, fastcall and MSVC cdecl support on Windows.
+	Add Amiga and newer MacOS support.
+	Add m68k FreeMiNT support.
+	Integration with iOS' xcode build tools.
+	Fix Octeon and MC68881 support.
+	Fix code pessimizations.
+
+3.0.10 Aug-23-11
+        Add support for Apple's iOS.
+	Add support for ARM VFP ABI.
+        Add RTEMS support for MIPS and M68K.
+	Fix instruction cache clearing problems on
+	  ARM and SPARC.
+	Fix the N64 build on mips-sgi-irix6.5.
 	Enable builds with Microsoft's compiler.
-	Enable x86 builds with Sun's compiler.
+	Enable x86 builds with Oracle's Solaris compiler.
+	Fix support for calling code compiled with Oracle's Sparc
+	  Solaris compiler.
+	Testsuite fixes for Tru64 Unix.
+	Additional platform support.
 
 3.0.9 Dec-31-09
         Add AVR32 and win64 ports.  Add ARM softfp support.
@@ -282,15 +354,19 @@
 Major processor architecture ports were contributed by the following
 developers:
 
+aarch64		Marcus Shawcroft, James Greenhalgh
 alpha		Richard Henderson
 arm		Raffaele Sena
+blackfin        Alexandre Keunecke I. de Mendonca
 cris		Simon Posnjak, Hans-Peter Nilsson
 frv		Anthony Green
 ia64		Hans Boehm
 m32r		Kazuhiro Inaoka
 m68k		Andreas Schwab
+microblaze	Nathan Rossi
 mips		Anthony Green, Casey Marshall
 mips64		David Daney
+moxie		Anthony Green
 pa		Randolph Chung, Dave Anglin, Andreas Tobler
 powerpc		Geoffrey Keating, Andreas Tobler, 
 			 David Edelsohn, John Hornkvist
@@ -299,8 +375,10 @@
 sh		Kaz Kojima
 sh64		Kaz Kojima
 sparc		Anthony Green, Gordon Irlam
+tile-gx/tilepro Walter Lee
 x86		Anthony Green, Jon Beniston
 x86-64		Bo Thorsen
+xtensa		Chris Zankel
 
 Jesper Skov and Andrew Haley both did more than their fair share of
 stepping through the code and tracking down bugs.
@@ -318,5 +396,6 @@
 The list above is almost certainly incomplete and inaccurate.  I'm
 happy to make corrections or additions upon request.
 
-If you have a problem, or have found a bug, please send a note to
-green@redhat.com.
+If you have a problem, or have found a bug, please send a note to the
+author at green@moxielogic.com, or the project mailing list at
+libffi-discuss@sourceware.org.
diff --git a/Modules/_ctypes/libffi/aclocal.m4 b/Modules/_ctypes/libffi/aclocal.m4
index c8e526f..c3ab272 100644
--- a/Modules/_ctypes/libffi/aclocal.m4
+++ b/Modules/_ctypes/libffi/aclocal.m4
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
+# generated automatically by aclocal 1.12.2 -*- Autoconf -*-
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
+# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -13,28 +13,848 @@
 
 m4_ifndef([AC_AUTOCONF_VERSION],
   [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.65],,
-[m4_warning([this file was generated for autoconf 2.65.
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
+[m4_warning([this file was generated for autoconf 2.69.
 You have another version of autoconf.  It may work, but is not guaranteed to.
 If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically `autoreconf'.])])
+To do so, use the procedure documented by the package, typically 'autoreconf'.])])
 
-# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# ltdl.m4 - Configure ltdl for the target system. -*-Autoconf-*-
+#
+#   Copyright (C) 1999-2006, 2007, 2008, 2011 Free Software Foundation, Inc.
+#   Written by Thomas Tanner, 1999
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 18 LTDL_INIT
+
+# LT_CONFIG_LTDL_DIR(DIRECTORY, [LTDL-MODE])
+# ------------------------------------------
+# DIRECTORY contains the libltdl sources.  It is okay to call this
+# function multiple times, as long as the same DIRECTORY is always given.
+AC_DEFUN([LT_CONFIG_LTDL_DIR],
+[AC_BEFORE([$0], [LTDL_INIT])
+_$0($*)
+])# LT_CONFIG_LTDL_DIR
+
+# We break this out into a separate macro, so that we can call it safely
+# internally without being caught accidentally by the sed scan in libtoolize.
+m4_defun([_LT_CONFIG_LTDL_DIR],
+[dnl remove trailing slashes
+m4_pushdef([_ARG_DIR], m4_bpatsubst([$1], [/*$]))
+m4_case(_LTDL_DIR,
+	[], [dnl only set lt_ltdl_dir if _ARG_DIR is not simply `.'
+	     m4_if(_ARG_DIR, [.],
+	             [],
+		 [m4_define([_LTDL_DIR], _ARG_DIR)
+	          _LT_SHELL_INIT([lt_ltdl_dir=']_ARG_DIR['])])],
+    [m4_if(_ARG_DIR, _LTDL_DIR,
+	    [],
+	[m4_fatal([multiple libltdl directories: `]_LTDL_DIR[', `]_ARG_DIR['])])])
+m4_popdef([_ARG_DIR])
+])# _LT_CONFIG_LTDL_DIR
+
+# Initialise:
+m4_define([_LTDL_DIR], [])
+
+
+# _LT_BUILD_PREFIX
+# ----------------
+# If Autoconf is new enough, expand to `${top_build_prefix}', otherwise
+# to `${top_builddir}/'.
+m4_define([_LT_BUILD_PREFIX],
+[m4_ifdef([AC_AUTOCONF_VERSION],
+   [m4_if(m4_version_compare(m4_defn([AC_AUTOCONF_VERSION]), [2.62]),
+	  [-1], [m4_ifdef([_AC_HAVE_TOP_BUILD_PREFIX],
+			  [${top_build_prefix}],
+			  [${top_builddir}/])],
+	  [${top_build_prefix}])],
+   [${top_builddir}/])[]dnl
+])
+
+
+# LTDL_CONVENIENCE
+# ----------------
+# sets LIBLTDL to the link flags for the libltdl convenience library and
+# LTDLINCL to the include flags for the libltdl header and adds
+# --enable-ltdl-convenience to the configure arguments.  Note that
+# AC_CONFIG_SUBDIRS is not called here.  LIBLTDL will be prefixed with
+# '${top_build_prefix}' if available, otherwise with '${top_builddir}/',
+# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
+# quotes!).  If your package is not flat and you're not using automake,
+# define top_build_prefix, top_builddir, and top_srcdir appropriately
+# in your Makefiles.
+AC_DEFUN([LTDL_CONVENIENCE],
+[AC_BEFORE([$0], [LTDL_INIT])dnl
+dnl Although the argument is deprecated and no longer documented,
+dnl LTDL_CONVENIENCE used to take a DIRECTORY orgument, if we have one
+dnl here make sure it is the same as any other declaration of libltdl's
+dnl location!  This also ensures lt_ltdl_dir is set when configure.ac is
+dnl not yet using an explicit LT_CONFIG_LTDL_DIR.
+m4_ifval([$1], [_LT_CONFIG_LTDL_DIR([$1])])dnl
+_$0()
+])# LTDL_CONVENIENCE
+
+# AC_LIBLTDL_CONVENIENCE accepted a directory argument in older libtools,
+# now we have LT_CONFIG_LTDL_DIR:
+AU_DEFUN([AC_LIBLTDL_CONVENIENCE],
+[_LT_CONFIG_LTDL_DIR([m4_default([$1], [libltdl])])
+_LTDL_CONVENIENCE])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBLTDL_CONVENIENCE], [])
+
+
+# _LTDL_CONVENIENCE
+# -----------------
+# Code shared by LTDL_CONVENIENCE and LTDL_INIT([convenience]).
+m4_defun([_LTDL_CONVENIENCE],
+[case $enable_ltdl_convenience in
+  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+  "") enable_ltdl_convenience=yes
+      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+esac
+LIBLTDL='_LT_BUILD_PREFIX'"${lt_ltdl_dir+$lt_ltdl_dir/}libltdlc.la"
+LTDLDEPS=$LIBLTDL
+LTDLINCL='-I${top_srcdir}'"${lt_ltdl_dir+/$lt_ltdl_dir}"
+
+AC_SUBST([LIBLTDL])
+AC_SUBST([LTDLDEPS])
+AC_SUBST([LTDLINCL])
+
+# For backwards non-gettext consistent compatibility...
+INCLTDL="$LTDLINCL"
+AC_SUBST([INCLTDL])
+])# _LTDL_CONVENIENCE
+
+
+# LTDL_INSTALLABLE
+# ----------------
+# sets LIBLTDL to the link flags for the libltdl installable library
+# and LTDLINCL to the include flags for the libltdl header and adds
+# --enable-ltdl-install to the configure arguments.  Note that
+# AC_CONFIG_SUBDIRS is not called from here.  If an installed libltdl
+# is not found, LIBLTDL will be prefixed with '${top_build_prefix}' if
+# available, otherwise with '${top_builddir}/', and LTDLINCL will be
+# prefixed with '${top_srcdir}/' (note the single quotes!).  If your
+# package is not flat and you're not using automake, define top_build_prefix,
+# top_builddir, and top_srcdir appropriately in your Makefiles.
+# In the future, this macro may have to be called after LT_INIT.
+AC_DEFUN([LTDL_INSTALLABLE],
+[AC_BEFORE([$0], [LTDL_INIT])dnl
+dnl Although the argument is deprecated and no longer documented,
+dnl LTDL_INSTALLABLE used to take a DIRECTORY orgument, if we have one
+dnl here make sure it is the same as any other declaration of libltdl's
+dnl location!  This also ensures lt_ltdl_dir is set when configure.ac is
+dnl not yet using an explicit LT_CONFIG_LTDL_DIR.
+m4_ifval([$1], [_LT_CONFIG_LTDL_DIR([$1])])dnl
+_$0()
+])# LTDL_INSTALLABLE
+
+# AC_LIBLTDL_INSTALLABLE accepted a directory argument in older libtools,
+# now we have LT_CONFIG_LTDL_DIR:
+AU_DEFUN([AC_LIBLTDL_INSTALLABLE],
+[_LT_CONFIG_LTDL_DIR([m4_default([$1], [libltdl])])
+_LTDL_INSTALLABLE])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBLTDL_INSTALLABLE], [])
+
+
+# _LTDL_INSTALLABLE
+# -----------------
+# Code shared by LTDL_INSTALLABLE and LTDL_INIT([installable]).
+m4_defun([_LTDL_INSTALLABLE],
+[if test -f $prefix/lib/libltdl.la; then
+  lt_save_LDFLAGS="$LDFLAGS"
+  LDFLAGS="-L$prefix/lib $LDFLAGS"
+  AC_CHECK_LIB([ltdl], [lt_dlinit], [lt_lib_ltdl=yes])
+  LDFLAGS="$lt_save_LDFLAGS"
+  if test x"${lt_lib_ltdl-no}" = xyes; then
+    if test x"$enable_ltdl_install" != xyes; then
+      # Don't overwrite $prefix/lib/libltdl.la without --enable-ltdl-install
+      AC_MSG_WARN([not overwriting libltdl at $prefix, force with `--enable-ltdl-install'])
+      enable_ltdl_install=no
+    fi
+  elif test x"$enable_ltdl_install" = xno; then
+    AC_MSG_WARN([libltdl not installed, but installation disabled])
+  fi
+fi
+
+# If configure.ac declared an installable ltdl, and the user didn't override
+# with --disable-ltdl-install, we will install the shipped libltdl.
+case $enable_ltdl_install in
+  no) ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+      LIBLTDL="-lltdl"
+      LTDLDEPS=
+      LTDLINCL=
+      ;;
+  *)  enable_ltdl_install=yes
+      ac_configure_args="$ac_configure_args --enable-ltdl-install"
+      LIBLTDL='_LT_BUILD_PREFIX'"${lt_ltdl_dir+$lt_ltdl_dir/}libltdl.la"
+      LTDLDEPS=$LIBLTDL
+      LTDLINCL='-I${top_srcdir}'"${lt_ltdl_dir+/$lt_ltdl_dir}"
+      ;;
+esac
+
+AC_SUBST([LIBLTDL])
+AC_SUBST([LTDLDEPS])
+AC_SUBST([LTDLINCL])
+
+# For backwards non-gettext consistent compatibility...
+INCLTDL="$LTDLINCL"
+AC_SUBST([INCLTDL])
+])# LTDL_INSTALLABLE
+
+
+# _LTDL_MODE_DISPATCH
+# -------------------
+m4_define([_LTDL_MODE_DISPATCH],
+[dnl If _LTDL_DIR is `.', then we are configuring libltdl itself:
+m4_if(_LTDL_DIR, [],
+	[],
+    dnl if _LTDL_MODE was not set already, the default value is `subproject':
+    [m4_case(m4_default(_LTDL_MODE, [subproject]),
+	  [subproject], [AC_CONFIG_SUBDIRS(_LTDL_DIR)
+			  _LT_SHELL_INIT([lt_dlopen_dir="$lt_ltdl_dir"])],
+	  [nonrecursive], [_LT_SHELL_INIT([lt_dlopen_dir="$lt_ltdl_dir"; lt_libobj_prefix="$lt_ltdl_dir/"])],
+	  [recursive], [],
+	[m4_fatal([unknown libltdl mode: ]_LTDL_MODE)])])dnl
+dnl Be careful not to expand twice:
+m4_define([$0], [])
+])# _LTDL_MODE_DISPATCH
+
+
+# _LT_LIBOBJ(MODULE_NAME)
+# -----------------------
+# Like AC_LIBOBJ, except that MODULE_NAME goes into _LT_LIBOBJS instead
+# of into LIBOBJS.
+AC_DEFUN([_LT_LIBOBJ], [
+  m4_pattern_allow([^_LT_LIBOBJS$])
+  _LT_LIBOBJS="$_LT_LIBOBJS $1.$ac_objext"
+])# _LT_LIBOBJS
+
+
+# LTDL_INIT([OPTIONS])
+# --------------------
+# Clients of libltdl can use this macro to allow the installer to
+# choose between a shipped copy of the ltdl sources or a preinstalled
+# version of the library.  If the shipped ltdl sources are not in a
+# subdirectory named libltdl, the directory name must be given by
+# LT_CONFIG_LTDL_DIR.
+AC_DEFUN([LTDL_INIT],
+[dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
+
+dnl We need to keep our own list of libobjs separate from our parent project,
+dnl and the easiest way to do that is redefine the AC_LIBOBJs macro while
+dnl we look for our own LIBOBJs.
+m4_pushdef([AC_LIBOBJ], m4_defn([_LT_LIBOBJ]))
+m4_pushdef([AC_LIBSOURCES])
+
+dnl If not otherwise defined, default to the 1.5.x compatible subproject mode:
+m4_if(_LTDL_MODE, [],
+        [m4_define([_LTDL_MODE], m4_default([$2], [subproject]))
+        m4_if([-1], [m4_bregexp(_LTDL_MODE, [\(subproject\|\(non\)?recursive\)])],
+                [m4_fatal([unknown libltdl mode: ]_LTDL_MODE)])])
+
+AC_ARG_WITH([included_ltdl],
+    [AS_HELP_STRING([--with-included-ltdl],
+                    [use the GNU ltdl sources included here])])
+
+if test "x$with_included_ltdl" != xyes; then
+  # We are not being forced to use the included libltdl sources, so
+  # decide whether there is a useful installed version we can use.
+  AC_CHECK_HEADER([ltdl.h],
+      [AC_CHECK_DECL([lt_dlinterface_register],
+	   [AC_CHECK_LIB([ltdl], [lt_dladvise_preload],
+	       [with_included_ltdl=no],
+	       [with_included_ltdl=yes])],
+	   [with_included_ltdl=yes],
+	   [AC_INCLUDES_DEFAULT
+	    #include <ltdl.h>])],
+      [with_included_ltdl=yes],
+      [AC_INCLUDES_DEFAULT]
+  )
+fi
+
+dnl If neither LT_CONFIG_LTDL_DIR, LTDL_CONVENIENCE nor LTDL_INSTALLABLE
+dnl was called yet, then for old times' sake, we assume libltdl is in an
+dnl eponymous directory:
+AC_PROVIDE_IFELSE([LT_CONFIG_LTDL_DIR], [], [_LT_CONFIG_LTDL_DIR([libltdl])])
+
+AC_ARG_WITH([ltdl_include],
+    [AS_HELP_STRING([--with-ltdl-include=DIR],
+                    [use the ltdl headers installed in DIR])])
+
+if test -n "$with_ltdl_include"; then
+  if test -f "$with_ltdl_include/ltdl.h"; then :
+  else
+    AC_MSG_ERROR([invalid ltdl include directory: `$with_ltdl_include'])
+  fi
+else
+  with_ltdl_include=no
+fi
+
+AC_ARG_WITH([ltdl_lib],
+    [AS_HELP_STRING([--with-ltdl-lib=DIR],
+                    [use the libltdl.la installed in DIR])])
+
+if test -n "$with_ltdl_lib"; then
+  if test -f "$with_ltdl_lib/libltdl.la"; then :
+  else
+    AC_MSG_ERROR([invalid ltdl library directory: `$with_ltdl_lib'])
+  fi
+else
+  with_ltdl_lib=no
+fi
+
+case ,$with_included_ltdl,$with_ltdl_include,$with_ltdl_lib, in
+  ,yes,no,no,)
+	m4_case(m4_default(_LTDL_TYPE, [convenience]),
+	    [convenience], [_LTDL_CONVENIENCE],
+	    [installable], [_LTDL_INSTALLABLE],
+	  [m4_fatal([unknown libltdl build type: ]_LTDL_TYPE)])
+	;;
+  ,no,no,no,)
+	# If the included ltdl is not to be used, then use the
+	# preinstalled libltdl we found.
+	AC_DEFINE([HAVE_LTDL], [1],
+	  [Define this if a modern libltdl is already installed])
+	LIBLTDL=-lltdl
+	LTDLDEPS=
+	LTDLINCL=
+	;;
+  ,no*,no,*)
+	AC_MSG_ERROR([`--with-ltdl-include' and `--with-ltdl-lib' options must be used together])
+	;;
+  *)	with_included_ltdl=no
+	LIBLTDL="-L$with_ltdl_lib -lltdl"
+	LTDLDEPS=
+	LTDLINCL="-I$with_ltdl_include"
+	;;
+esac
+INCLTDL="$LTDLINCL"
+
+# Report our decision...
+AC_MSG_CHECKING([where to find libltdl headers])
+AC_MSG_RESULT([$LTDLINCL])
+AC_MSG_CHECKING([where to find libltdl library])
+AC_MSG_RESULT([$LIBLTDL])
+
+_LTDL_SETUP
+
+dnl restore autoconf definition.
+m4_popdef([AC_LIBOBJ])
+m4_popdef([AC_LIBSOURCES])
+
+AC_CONFIG_COMMANDS_PRE([
+    _ltdl_libobjs=
+    _ltdl_ltlibobjs=
+    if test -n "$_LT_LIBOBJS"; then
+      # Remove the extension.
+      _lt_sed_drop_objext='s/\.o$//;s/\.obj$//'
+      for i in `for i in $_LT_LIBOBJS; do echo "$i"; done | sed "$_lt_sed_drop_objext" | sort -u`; do
+        _ltdl_libobjs="$_ltdl_libobjs $lt_libobj_prefix$i.$ac_objext"
+        _ltdl_ltlibobjs="$_ltdl_ltlibobjs $lt_libobj_prefix$i.lo"
+      done
+    fi
+    AC_SUBST([ltdl_LIBOBJS], [$_ltdl_libobjs])
+    AC_SUBST([ltdl_LTLIBOBJS], [$_ltdl_ltlibobjs])
+])
+
+# Only expand once:
+m4_define([LTDL_INIT])
+])# LTDL_INIT
+
+# Old names:
+AU_DEFUN([AC_LIB_LTDL], [LTDL_INIT($@)])
+AU_DEFUN([AC_WITH_LTDL], [LTDL_INIT($@)])
+AU_DEFUN([LT_WITH_LTDL], [LTDL_INIT($@)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIB_LTDL], [])
+dnl AC_DEFUN([AC_WITH_LTDL], [])
+dnl AC_DEFUN([LT_WITH_LTDL], [])
+
+
+# _LTDL_SETUP
+# -----------
+# Perform all the checks necessary for compilation of the ltdl objects
+#  -- including compiler checks and header checks.  This is a public
+# interface  mainly for the benefit of libltdl's own configure.ac, most
+# other users should call LTDL_INIT instead.
+AC_DEFUN([_LTDL_SETUP],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_SYS_MODULE_EXT])dnl
+AC_REQUIRE([LT_SYS_MODULE_PATH])dnl
+AC_REQUIRE([LT_SYS_DLSEARCH_PATH])dnl
+AC_REQUIRE([LT_LIB_DLLOAD])dnl
+AC_REQUIRE([LT_SYS_SYMBOL_USCORE])dnl
+AC_REQUIRE([LT_FUNC_DLSYM_USCORE])dnl
+AC_REQUIRE([LT_SYS_DLOPEN_DEPLIBS])dnl
+AC_REQUIRE([gl_FUNC_ARGZ])dnl
+
+m4_require([_LT_CHECK_OBJDIR])dnl
+m4_require([_LT_HEADER_DLFCN])dnl
+m4_require([_LT_CHECK_DLPREOPEN])dnl
+m4_require([_LT_DECL_SED])dnl
+
+dnl Don't require this, or it will be expanded earlier than the code
+dnl that sets the variables it relies on:
+_LT_ENABLE_INSTALL
+
+dnl _LTDL_MODE specific code must be called at least once:
+_LTDL_MODE_DISPATCH
+
+# In order that ltdl.c can compile, find out the first AC_CONFIG_HEADERS
+# the user used.  This is so that ltdl.h can pick up the parent projects
+# config.h file, The first file in AC_CONFIG_HEADERS must contain the
+# definitions required by ltdl.c.
+# FIXME: Remove use of undocumented AC_LIST_HEADERS (2.59 compatibility).
+AC_CONFIG_COMMANDS_PRE([dnl
+m4_pattern_allow([^LT_CONFIG_H$])dnl
+m4_ifset([AH_HEADER],
+    [LT_CONFIG_H=AH_HEADER],
+    [m4_ifset([AC_LIST_HEADERS],
+	    [LT_CONFIG_H=`echo "AC_LIST_HEADERS" | $SED 's,^[[      ]]*,,;s,[[ :]].*$,,'`],
+	[])])])
+AC_SUBST([LT_CONFIG_H])
+
+AC_CHECK_HEADERS([unistd.h dl.h sys/dl.h dld.h mach-o/dyld.h dirent.h],
+	[], [], [AC_INCLUDES_DEFAULT])
+
+AC_CHECK_FUNCS([closedir opendir readdir], [], [AC_LIBOBJ([lt__dirent])])
+AC_CHECK_FUNCS([strlcat strlcpy], [], [AC_LIBOBJ([lt__strl])])
+
+m4_pattern_allow([LT_LIBEXT])dnl
+AC_DEFINE_UNQUOTED([LT_LIBEXT],["$libext"],[The archive extension])
+
+name=
+eval "lt_libprefix=\"$libname_spec\""
+m4_pattern_allow([LT_LIBPREFIX])dnl
+AC_DEFINE_UNQUOTED([LT_LIBPREFIX],["$lt_libprefix"],[The archive prefix])
+
+name=ltdl
+eval "LTDLOPEN=\"$libname_spec\""
+AC_SUBST([LTDLOPEN])
+])# _LTDL_SETUP
+
+
+# _LT_ENABLE_INSTALL
+# ------------------
+m4_define([_LT_ENABLE_INSTALL],
+[AC_ARG_ENABLE([ltdl-install],
+    [AS_HELP_STRING([--enable-ltdl-install], [install libltdl])])
+
+case ,${enable_ltdl_install},${enable_ltdl_convenience} in
+  *yes*) ;;
+  *) enable_ltdl_convenience=yes ;;
+esac
+
+m4_ifdef([AM_CONDITIONAL],
+[AM_CONDITIONAL(INSTALL_LTDL, test x"${enable_ltdl_install-no}" != xno)
+ AM_CONDITIONAL(CONVENIENCE_LTDL, test x"${enable_ltdl_convenience-no}" != xno)])
+])# _LT_ENABLE_INSTALL
+
+
+# LT_SYS_DLOPEN_DEPLIBS
+# ---------------------
+AC_DEFUN([LT_SYS_DLOPEN_DEPLIBS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_CACHE_CHECK([whether deplibs are loaded by dlopen],
+  [lt_cv_sys_dlopen_deplibs],
+  [# PORTME does your system automatically load deplibs for dlopen?
+  # or its logical equivalent (e.g. shl_load for HP-UX < 11)
+  # For now, we just catch OSes we know something about -- in the
+  # future, we'll try test this programmatically.
+  lt_cv_sys_dlopen_deplibs=unknown
+  case $host_os in
+  aix3*|aix4.1.*|aix4.2.*)
+    # Unknown whether this is true for these versions of AIX, but
+    # we want this `case' here to explicitly catch those versions.
+    lt_cv_sys_dlopen_deplibs=unknown
+    ;;
+  aix[[4-9]]*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  amigaos*)
+    case $host_cpu in
+    powerpc)
+      lt_cv_sys_dlopen_deplibs=no
+      ;;
+    esac
+    ;;
+  darwin*)
+    # Assuming the user has installed a libdl from somewhere, this is true
+    # If you are looking for one http://www.opendarwin.org/projects/dlcompat
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  freebsd* | dragonfly*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  gnu* | linux* | k*bsd*-gnu | kopensolaris*-gnu)
+    # GNU and its variants, using gnu ld.so (Glibc)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  hpux10*|hpux11*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  interix*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  irix[[12345]]*|irix6.[[01]]*)
+    # Catch all versions of IRIX before 6.2, and indicate that we don't
+    # know how it worked for any of those versions.
+    lt_cv_sys_dlopen_deplibs=unknown
+    ;;
+  irix*)
+    # The case above catches anything before 6.2, and it's known that
+    # at 6.2 and later dlopen does load deplibs.
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  netbsd*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  openbsd*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  osf[[1234]]*)
+    # dlopen did load deplibs (at least at 4.x), but until the 5.x series,
+    # it did *not* use an RPATH in a shared library to find objects the
+    # library depends on, so we explicitly say `no'.
+    lt_cv_sys_dlopen_deplibs=no
+    ;;
+  osf5.0|osf5.0a|osf5.1)
+    # dlopen *does* load deplibs and with the right loader patch applied
+    # it even uses RPATH in a shared library to search for shared objects
+    # that the library depends on, but there's no easy way to know if that
+    # patch is installed.  Since this is the case, all we can really
+    # say is unknown -- it depends on the patch being installed.  If
+    # it is, this changes to `yes'.  Without it, it would be `no'.
+    lt_cv_sys_dlopen_deplibs=unknown
+    ;;
+  osf*)
+    # the two cases above should catch all versions of osf <= 5.1.  Read
+    # the comments above for what we know about them.
+    # At > 5.1, deplibs are loaded *and* any RPATH in a shared library
+    # is used to find them so we can finally say `yes'.
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  qnx*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  solaris*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+    libltdl_cv_sys_dlopen_deplibs=yes
+    ;;
+  esac
+  ])
+if test "$lt_cv_sys_dlopen_deplibs" != yes; then
+ AC_DEFINE([LTDL_DLOPEN_DEPLIBS], [1],
+    [Define if the OS needs help to load dependent libraries for dlopen().])
+fi
+])# LT_SYS_DLOPEN_DEPLIBS
+
+# Old name:
+AU_ALIAS([AC_LTDL_SYS_DLOPEN_DEPLIBS], [LT_SYS_DLOPEN_DEPLIBS])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LTDL_SYS_DLOPEN_DEPLIBS], [])
+
+
+# LT_SYS_MODULE_EXT
+# -----------------
+AC_DEFUN([LT_SYS_MODULE_EXT],
+[m4_require([_LT_SYS_DYNAMIC_LINKER])dnl
+AC_CACHE_CHECK([which extension is used for runtime loadable modules],
+  [libltdl_cv_shlibext],
+[
+module=yes
+eval libltdl_cv_shlibext=$shrext_cmds
+module=no
+eval libltdl_cv_shrext=$shrext_cmds
+  ])
+if test -n "$libltdl_cv_shlibext"; then
+  m4_pattern_allow([LT_MODULE_EXT])dnl
+  AC_DEFINE_UNQUOTED([LT_MODULE_EXT], ["$libltdl_cv_shlibext"],
+    [Define to the extension used for runtime loadable modules, say, ".so".])
+fi
+if test "$libltdl_cv_shrext" != "$libltdl_cv_shlibext"; then
+  m4_pattern_allow([LT_SHARED_EXT])dnl
+  AC_DEFINE_UNQUOTED([LT_SHARED_EXT], ["$libltdl_cv_shrext"],
+    [Define to the shared library suffix, say, ".dylib".])
+fi
+])# LT_SYS_MODULE_EXT
+
+# Old name:
+AU_ALIAS([AC_LTDL_SHLIBEXT], [LT_SYS_MODULE_EXT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LTDL_SHLIBEXT], [])
+
+
+# LT_SYS_MODULE_PATH
+# ------------------
+AC_DEFUN([LT_SYS_MODULE_PATH],
+[m4_require([_LT_SYS_DYNAMIC_LINKER])dnl
+AC_CACHE_CHECK([which variable specifies run-time module search path],
+  [lt_cv_module_path_var], [lt_cv_module_path_var="$shlibpath_var"])
+if test -n "$lt_cv_module_path_var"; then
+  m4_pattern_allow([LT_MODULE_PATH_VAR])dnl
+  AC_DEFINE_UNQUOTED([LT_MODULE_PATH_VAR], ["$lt_cv_module_path_var"],
+    [Define to the name of the environment variable that determines the run-time module search path.])
+fi
+])# LT_SYS_MODULE_PATH
+
+# Old name:
+AU_ALIAS([AC_LTDL_SHLIBPATH], [LT_SYS_MODULE_PATH])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LTDL_SHLIBPATH], [])
+
+
+# LT_SYS_DLSEARCH_PATH
+# --------------------
+AC_DEFUN([LT_SYS_DLSEARCH_PATH],
+[m4_require([_LT_SYS_DYNAMIC_LINKER])dnl
+AC_CACHE_CHECK([for the default library search path],
+  [lt_cv_sys_dlsearch_path],
+  [lt_cv_sys_dlsearch_path="$sys_lib_dlsearch_path_spec"])
+if test -n "$lt_cv_sys_dlsearch_path"; then
+  sys_dlsearch_path=
+  for dir in $lt_cv_sys_dlsearch_path; do
+    if test -z "$sys_dlsearch_path"; then
+      sys_dlsearch_path="$dir"
+    else
+      sys_dlsearch_path="$sys_dlsearch_path$PATH_SEPARATOR$dir"
+    fi
+  done
+  m4_pattern_allow([LT_DLSEARCH_PATH])dnl
+  AC_DEFINE_UNQUOTED([LT_DLSEARCH_PATH], ["$sys_dlsearch_path"],
+    [Define to the system default library search path.])
+fi
+])# LT_SYS_DLSEARCH_PATH
+
+# Old name:
+AU_ALIAS([AC_LTDL_SYSSEARCHPATH], [LT_SYS_DLSEARCH_PATH])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LTDL_SYSSEARCHPATH], [])
+
+
+# _LT_CHECK_DLPREOPEN
+# -------------------
+m4_defun([_LT_CHECK_DLPREOPEN],
+[m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+AC_CACHE_CHECK([whether libtool supports -dlopen/-dlpreopen],
+  [libltdl_cv_preloaded_symbols],
+  [if test -n "$lt_cv_sys_global_symbol_pipe"; then
+    libltdl_cv_preloaded_symbols=yes
+  else
+    libltdl_cv_preloaded_symbols=no
+  fi
+  ])
+if test x"$libltdl_cv_preloaded_symbols" = xyes; then
+  AC_DEFINE([HAVE_PRELOADED_SYMBOLS], [1],
+    [Define if libtool can extract symbol lists from object files.])
+fi
+])# _LT_CHECK_DLPREOPEN
+
+
+# LT_LIB_DLLOAD
+# -------------
+AC_DEFUN([LT_LIB_DLLOAD],
+[m4_pattern_allow([^LT_DLLOADERS$])
+LT_DLLOADERS=
+AC_SUBST([LT_DLLOADERS])
+
+AC_LANG_PUSH([C])
+
+LIBADD_DLOPEN=
+AC_SEARCH_LIBS([dlopen], [dl],
+	[AC_DEFINE([HAVE_LIBDL], [1],
+		   [Define if you have the libdl library or equivalent.])
+	if test "$ac_cv_search_dlopen" != "none required" ; then
+	  LIBADD_DLOPEN="-ldl"
+	fi
+	libltdl_cv_lib_dl_dlopen="yes"
+	LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"],
+    [AC_LINK_IFELSE([AC_LANG_PROGRAM([[#if HAVE_DLFCN_H
+#  include <dlfcn.h>
+#endif
+    ]], [[dlopen(0, 0);]])],
+	    [AC_DEFINE([HAVE_LIBDL], [1],
+		       [Define if you have the libdl library or equivalent.])
+	    libltdl_cv_func_dlopen="yes"
+	    LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"],
+	[AC_CHECK_LIB([svld], [dlopen],
+		[AC_DEFINE([HAVE_LIBDL], [1],
+			 [Define if you have the libdl library or equivalent.])
+	        LIBADD_DLOPEN="-lsvld" libltdl_cv_func_dlopen="yes"
+		LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"])])])
+if test x"$libltdl_cv_func_dlopen" = xyes || test x"$libltdl_cv_lib_dl_dlopen" = xyes
+then
+  lt_save_LIBS="$LIBS"
+  LIBS="$LIBS $LIBADD_DLOPEN"
+  AC_CHECK_FUNCS([dlerror])
+  LIBS="$lt_save_LIBS"
+fi
+AC_SUBST([LIBADD_DLOPEN])
+
+LIBADD_SHL_LOAD=
+AC_CHECK_FUNC([shl_load],
+	[AC_DEFINE([HAVE_SHL_LOAD], [1],
+		   [Define if you have the shl_load function.])
+	LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}shl_load.la"],
+    [AC_CHECK_LIB([dld], [shl_load],
+	    [AC_DEFINE([HAVE_SHL_LOAD], [1],
+		       [Define if you have the shl_load function.])
+	    LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}shl_load.la"
+	    LIBADD_SHL_LOAD="-ldld"])])
+AC_SUBST([LIBADD_SHL_LOAD])
+
+case $host_os in
+darwin[[1567]].*)
+# We only want this for pre-Mac OS X 10.4.
+  AC_CHECK_FUNC([_dyld_func_lookup],
+	[AC_DEFINE([HAVE_DYLD], [1],
+		   [Define if you have the _dyld_func_lookup function.])
+	LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dyld.la"])
+  ;;
+beos*)
+  LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}load_add_on.la"
+  ;;
+cygwin* | mingw* | os2* | pw32*)
+  AC_CHECK_DECLS([cygwin_conv_path], [], [], [[#include <sys/cygwin.h>]])
+  LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}loadlibrary.la"
+  ;;
+esac
+
+AC_CHECK_LIB([dld], [dld_link],
+	[AC_DEFINE([HAVE_DLD], [1],
+		   [Define if you have the GNU dld library.])
+		LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dld_link.la"])
+AC_SUBST([LIBADD_DLD_LINK])
+
+m4_pattern_allow([^LT_DLPREOPEN$])
+LT_DLPREOPEN=
+if test -n "$LT_DLLOADERS"
+then
+  for lt_loader in $LT_DLLOADERS; do
+    LT_DLPREOPEN="$LT_DLPREOPEN-dlpreopen $lt_loader "
+  done
+  AC_DEFINE([HAVE_LIBDLLOADER], [1],
+            [Define if libdlloader will be built on this platform])
+fi
+AC_SUBST([LT_DLPREOPEN])
+
+dnl This isn't used anymore, but set it for backwards compatibility
+LIBADD_DL="$LIBADD_DLOPEN $LIBADD_SHL_LOAD"
+AC_SUBST([LIBADD_DL])
+
+AC_LANG_POP
+])# LT_LIB_DLLOAD
+
+# Old name:
+AU_ALIAS([AC_LTDL_DLLIB], [LT_LIB_DLLOAD])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LTDL_DLLIB], [])
+
+
+# LT_SYS_SYMBOL_USCORE
+# --------------------
+# does the compiler prefix global symbols with an underscore?
+AC_DEFUN([LT_SYS_SYMBOL_USCORE],
+[m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+AC_CACHE_CHECK([for _ prefix in compiled symbols],
+  [lt_cv_sys_symbol_underscore],
+  [lt_cv_sys_symbol_underscore=no
+  cat > conftest.$ac_ext <<_LT_EOF
+void nm_test_func(){}
+int main(){nm_test_func;return 0;}
+_LT_EOF
+  if AC_TRY_EVAL(ac_compile); then
+    # Now try to grab the symbols.
+    ac_nlist=conftest.nm
+    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
+      # See whether the symbols have a leading underscore.
+      if grep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
+        lt_cv_sys_symbol_underscore=yes
+      else
+        if grep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
+	  :
+        else
+	  echo "configure: cannot find nm_test_func in $ac_nlist" >&AS_MESSAGE_LOG_FD
+        fi
+      fi
+    else
+      echo "configure: cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
+    fi
+  else
+    echo "configure: failed program was:" >&AS_MESSAGE_LOG_FD
+    cat conftest.c >&AS_MESSAGE_LOG_FD
+  fi
+  rm -rf conftest*
+  ])
+  sys_symbol_underscore=$lt_cv_sys_symbol_underscore
+  AC_SUBST([sys_symbol_underscore])
+])# LT_SYS_SYMBOL_USCORE
+
+# Old name:
+AU_ALIAS([AC_LTDL_SYMBOL_USCORE], [LT_SYS_SYMBOL_USCORE])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LTDL_SYMBOL_USCORE], [])
+
+
+# LT_FUNC_DLSYM_USCORE
+# --------------------
+AC_DEFUN([LT_FUNC_DLSYM_USCORE],
+[AC_REQUIRE([LT_SYS_SYMBOL_USCORE])dnl
+if test x"$lt_cv_sys_symbol_underscore" = xyes; then
+  if test x"$libltdl_cv_func_dlopen" = xyes ||
+     test x"$libltdl_cv_lib_dl_dlopen" = xyes ; then
+	AC_CACHE_CHECK([whether we have to add an underscore for dlsym],
+	  [libltdl_cv_need_uscore],
+	  [libltdl_cv_need_uscore=unknown
+          save_LIBS="$LIBS"
+          LIBS="$LIBS $LIBADD_DLOPEN"
+	  _LT_TRY_DLOPEN_SELF(
+	    [libltdl_cv_need_uscore=no], [libltdl_cv_need_uscore=yes],
+	    [],				 [libltdl_cv_need_uscore=cross])
+	  LIBS="$save_LIBS"
+	])
+  fi
+fi
+
+if test x"$libltdl_cv_need_uscore" = xyes; then
+  AC_DEFINE([NEED_USCORE], [1],
+    [Define if dlsym() requires a leading underscore in symbol names.])
+fi
+])# LT_FUNC_DLSYM_USCORE
+
+# Old name:
+AU_ALIAS([AC_LTDL_DLSYM_USCORE], [LT_FUNC_DLSYM_USCORE])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LTDL_DLSYM_USCORE], [])
+
+# Copyright (C) 2002-2012 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
+# serial 8
+
 # AM_AUTOMAKE_VERSION(VERSION)
 # ----------------------------
 # Automake X.Y traces this macro to ensure aclocal.m4 has been
 # generated from the m4 files accompanying Automake X.Y.
 # (This private macro should not be called outside this file.)
 AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.11'
+[am__api_version='1.12'
 dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
 dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.11.1], [],
+m4_if([$1], [1.12.2], [],
       [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
 ])
 
@@ -50,14 +870,14 @@
 # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
 # This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.11.1])dnl
+[AM_AUTOMAKE_VERSION([1.12.2])dnl
 m4_ifndef([AC_AUTOCONF_VERSION],
   [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
 _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
 
 # Figure out how to run the assembler.                      -*- Autoconf -*-
 
-# Copyright (C) 2001, 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+# Copyright (C) 2001-2012 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -79,15 +899,17 @@
 
 # AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
 
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2001-2012 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
+# serial 2
+
 # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+# $ac_aux_dir to '$srcdir/foo'.  In other projects, it is set to
+# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
 #
 # Of course, Automake must honor this variable whenever it calls a
 # tool from the auxiliary directory.  The problem is that $srcdir (and
@@ -106,7 +928,7 @@
 #
 # The reason of the latter failure is that $top_srcdir and $ac_aux_dir
 # are both prefixed by $srcdir.  In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
+# harmless because $srcdir is '.', but things will broke when you
 # start a VPATH build or use an absolute $srcdir.
 #
 # So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
@@ -132,22 +954,21 @@
 
 # AM_CONDITIONAL                                            -*- Autoconf -*-
 
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
-# Free Software Foundation, Inc.
+# Copyright (C) 1997-2012 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 9
+# serial 10
 
 # AM_CONDITIONAL(NAME, SHELL-CONDITION)
 # -------------------------------------
 # Define a conditional.
 AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ(2.52)dnl
- ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
-	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+[AC_PREREQ([2.52])dnl
+ m4_if([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+       [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
 AC_SUBST([$1_TRUE])dnl
 AC_SUBST([$1_FALSE])dnl
 _AM_SUBST_NOTMAKE([$1_TRUE])dnl
@@ -166,16 +987,15 @@
 Usually this means the macro was only invoked conditionally.]])
 fi])])
 
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
-# Free Software Foundation, Inc.
+# Copyright (C) 1999-2012 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 10
+# serial 17
 
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
 # written in clear, in which case automake, when reading aclocal.m4,
 # will think it sees a *use*, and therefore will trigger all it's
 # C support machinery.  Also note that it means that autoscan, seeing
@@ -185,7 +1005,7 @@
 # _AM_DEPENDENCIES(NAME)
 # ----------------------
 # See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
 # We try a few techniques and use that to set a single cache variable.
 #
 # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
@@ -198,12 +1018,13 @@
 AC_REQUIRE([AM_MAKE_INCLUDE])dnl
 AC_REQUIRE([AM_DEP_TRACK])dnl
 
-ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
-       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
-       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
-       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
-       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
-                   [depcc="$$1"   am_compiler_list=])
+m4_if([$1], [CC],   [depcc="$CC"   am_compiler_list=],
+      [$1], [CXX],  [depcc="$CXX"  am_compiler_list=],
+      [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+      [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
+      [$1], [UPC],  [depcc="$UPC"  am_compiler_list=],
+      [$1], [GCJ],  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                    [depcc="$$1"   am_compiler_list=])
 
 AC_CACHE_CHECK([dependency style of $depcc],
                [am_cv_$1_dependencies_compiler_type],
@@ -211,8 +1032,9 @@
   # We make a subdir and do the tests there.  Otherwise we can end up
   # making bogus files that we don't know about and never remove.  For
   # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
+  rm -rf conftest.dir
   mkdir conftest.dir
   # Copy depcomp to subdir because otherwise we won't find it if we're
   # using a relative directory.
@@ -251,16 +1073,16 @@
     : > sub/conftest.c
     for i in 1 2 3 4 5 6; do
       echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
     done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
     # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
     am__obj=sub/conftest.${OBJEXT-o}
     am__minus_obj="-o $am__obj"
     case $depmode in
@@ -269,16 +1091,16 @@
       test "$am__universal" = false || continue
       ;;
     nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
       if test "x$enable_dependency_tracking" = xyes; then
 	continue
       else
 	break
       fi
       ;;
-    msvisualcpp | msvcmsys)
-      # This compiler won't grok `-c -o', but also, the minuso test has
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok '-c -o', but also, the minuso test has
       # not run yet.  These depmodes are late enough in the game, and
       # so weak that their functioning should not be impacted.
       am__obj=conftest.${OBJEXT-o}
@@ -326,7 +1148,7 @@
 # AM_SET_DEPDIR
 # -------------
 # Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
 AC_DEFUN([AM_SET_DEPDIR],
 [AC_REQUIRE([AM_SET_LEADING_DOT])dnl
 AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
@@ -336,28 +1158,34 @@
 # AM_DEP_TRACK
 # ------------
 AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[  --disable-dependency-tracking  speeds up one-time build
-  --enable-dependency-tracking   do not reject slow dependency extractors])
+[AC_ARG_ENABLE([dependency-tracking], [dnl
+AS_HELP_STRING(
+  [--enable-dependency-tracking],
+  [do not reject slow dependency extractors])
+AS_HELP_STRING(
+  [--disable-dependency-tracking],
+  [speeds up one-time build])])
 if test "x$enable_dependency_tracking" != xno; then
   am_depcomp="$ac_aux_dir/depcomp"
   AMDEPBACKSLASH='\'
+  am__nodep='_no'
 fi
 AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
 AC_SUBST([AMDEPBACKSLASH])dnl
 _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+AC_SUBST([am__nodep])dnl
+_AM_SUBST_NOTMAKE([am__nodep])dnl
 ])
 
 # Generate code to set up dependency tracking.              -*- Autoconf -*-
 
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
+# Copyright (C) 1999-2012 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-#serial 5
+# serial 6
 
 # _AM_OUTPUT_DEPENDENCY_COMMANDS
 # ------------------------------
@@ -376,7 +1204,7 @@
     # Strip MF so we end up with the name of the file.
     mf=`echo "$mf" | sed -e 's/:.*$//'`
     # Check whether this is an Automake generated Makefile or not.
-    # We used to match only the files named `Makefile.in', but
+    # We used to match only the files named 'Makefile.in', but
     # some people rename them; so instead we look at the file content.
     # Grep'ing the first line is not enough: some people post-process
     # each Makefile.in and add a new line on top of each file to say so.
@@ -388,21 +1216,19 @@
       continue
     fi
     # Extract the definition of DEPDIR, am__include, and am__quote
-    # from the Makefile without running `make'.
+    # from the Makefile without running 'make'.
     DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
     test -z "$DEPDIR" && continue
     am__include=`sed -n 's/^am__include = //p' < "$mf"`
     test -z "am__include" && continue
     am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-    # When using ansi2knr, U may be empty or an underscore; expand it
-    U=`sed -n 's/^U = //p' < "$mf"`
     # Find all dependency output files, they are included files with
     # $(DEPDIR) in their names.  We invoke sed twice because it is the
     # simplest approach to changing $(DEPDIR) to its actual value in the
     # expansion.
     for file in `sed -n "
       s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
       # Make sure the directory exists.
       test -f "$dirpart/$file" && continue
       fdir=`AS_DIRNAME(["$file"])`
@@ -420,7 +1246,7 @@
 # This macro should only be invoked once -- use via AC_REQUIRE.
 #
 # This code is only required when automatic dependency tracking
-# is enabled.  FIXME.  This creates each `.P' file that we will
+# is enabled.  FIXME.  This creates each '.P' file that we will
 # need in order to bootstrap the dependency handling code.
 AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
 [AC_CONFIG_COMMANDS([depfiles],
@@ -430,14 +1256,13 @@
 
 # Do all the work for Automake.                             -*- Autoconf -*-
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+# Copyright (C) 1996-2012 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 16
+# serial 19
 
 # This macro actually does too much.  Some checks are only needed if
 # your package does certain things.  But this isn't really a big deal.
@@ -483,31 +1308,41 @@
 # Define the identity of the package.
 dnl Distinguish between old-style and new-style calls.
 m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+[AC_DIAGNOSE([obsolete],
+[$0: two- and three-arguments forms are deprecated.  For more info, see:
+http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation])
+m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
  AC_SUBST([PACKAGE], [$1])dnl
  AC_SUBST([VERSION], [$2])],
 [_AM_SET_OPTIONS([$1])dnl
 dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+m4_if(
+  m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
+  [ok:ok],,
   [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
  AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
  AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
 
 _AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
+ AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
 
 # Some tools Automake needs.
 AC_REQUIRE([AM_SANITY_CHECK])dnl
 AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
+AM_MISSING_PROG([AUTOCONF], [autoconf])
+AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
+AM_MISSING_PROG([AUTOHEADER], [autoheader])
+AM_MISSING_PROG([MAKEINFO], [makeinfo])
 AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
 AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
-AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+# For better backward compatibility.  To be removed once Automake 1.9.x
+# dies out for good.  For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
 # We need awk for the "check" target.  The system "awk" is bad on
 # some platforms.
 AC_REQUIRE([AC_PROG_AWK])dnl
@@ -518,28 +1353,35 @@
 			     [_AM_PROG_TAR([v7])])])
 _AM_IF_OPTION([no-dependencies],,
 [AC_PROVIDE_IFELSE([AC_PROG_CC],
-		  [_AM_DEPENDENCIES(CC)],
-		  [define([AC_PROG_CC],
-			  defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+		  [_AM_DEPENDENCIES([CC])],
+		  [m4_define([AC_PROG_CC],
+			     m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
 AC_PROVIDE_IFELSE([AC_PROG_CXX],
-		  [_AM_DEPENDENCIES(CXX)],
-		  [define([AC_PROG_CXX],
-			  defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+		  [_AM_DEPENDENCIES([CXX])],
+		  [m4_define([AC_PROG_CXX],
+			     m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
 AC_PROVIDE_IFELSE([AC_PROG_OBJC],
-		  [_AM_DEPENDENCIES(OBJC)],
-		  [define([AC_PROG_OBJC],
-			  defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+		  [_AM_DEPENDENCIES([OBJC])],
+		  [m4_define([AC_PROG_OBJC],
+			     m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
+dnl Support for Objective C++ was only introduced in Autoconf 2.65,
+dnl but we still cater to Autoconf 2.62.
+m4_ifdef([AC_PROG_OBJCXX],
+[AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
+		  [_AM_DEPENDENCIES([OBJCXX])],
+		  [m4_define([AC_PROG_OBJCXX],
+			     m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])])dnl
 ])
 _AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
-dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
-dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
+dnl The 'parallel-tests' driver may need to know about EXEEXT, so add the
+dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
 dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
 AC_CONFIG_COMMANDS_PRE(dnl
 [m4_provide_if([_AM_COMPILER_EXEEXT],
   [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
 ])
 
-dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
 dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
 dnl mangled by Autoconf and run in a shell conditional statement.
 m4_define([_AC_COMPILER_EXEEXT],
@@ -567,12 +1409,14 @@
 done
 echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
 
-# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
+# Copyright (C) 2001-2012 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
+# serial 8
+
 # AM_PROG_INSTALL_SH
 # ------------------
 # Define $install_sh.
@@ -586,9 +1430,9 @@
     install_sh="\${SHELL} $am_aux_dir/install-sh"
   esac
 fi
-AC_SUBST(install_sh)])
+AC_SUBST([install_sh])])
 
-# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2003-2012 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -612,20 +1456,19 @@
 # Add --enable-maintainer-mode option to configure.         -*- Autoconf -*-
 # From Jim Meyering
 
-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
+# Copyright (C) 1996-2012 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 5
+# serial 7
 
 # AM_MAINTAINER_MODE([DEFAULT-MODE])
 # ----------------------------------
 # Control maintainer-specific portions of Makefiles.
-# Default is to disable them, unless `enable' is passed literally.
-# For symmetry, `disable' may be passed as well.  Anyway, the user
+# Default is to disable them, unless 'enable' is passed literally.
+# For symmetry, 'disable' may be passed as well.  Anyway, the user
 # can override the default with the --enable/--disable switch.
 AC_DEFUN([AM_MAINTAINER_MODE],
 [m4_case(m4_default([$1], [disable]),
@@ -633,13 +1476,14 @@
        [disable], [m4_define([am_maintainer_other], [enable])],
        [m4_define([am_maintainer_other], [enable])
         m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
-AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles])
+AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
   dnl maintainer-mode's default is 'disable' unless 'enable' is passed
   AC_ARG_ENABLE([maintainer-mode],
-[  --][am_maintainer_other][-maintainer-mode  am_maintainer_other make rules and dependencies not useful
-			  (and sometimes confusing) to the casual installer],
-      [USE_MAINTAINER_MODE=$enableval],
-      [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
+    [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode],
+      am_maintainer_other[ make rules and dependencies not useful
+      (and sometimes confusing) to the casual installer])],
+    [USE_MAINTAINER_MODE=$enableval],
+    [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
   AC_MSG_RESULT([$USE_MAINTAINER_MODE])
   AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
   MAINT=$MAINTAINER_MODE_TRUE
@@ -651,13 +1495,13 @@
 
 # Check to see how 'make' treats includes.	            -*- Autoconf -*-
 
-# Copyright (C) 2001, 2002, 2003, 2005, 2009  Free Software Foundation, Inc.
+# Copyright (C) 2001-2012 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 4
+# serial 5
 
 # AM_MAKE_INCLUDE()
 # -----------------
@@ -676,7 +1520,7 @@
 _am_result=none
 # First try GNU make style include.
 echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
+# Ignore all kinds of additional output from 'make'.
 case `$am_make -s -f confmf 2> /dev/null` in #(
 *the\ am__doit\ target*)
   am__include=include
@@ -701,8 +1545,7 @@
 rm -f confinc confmf
 ])
 
-# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
+# Copyright (C) 1999-2012 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -738,14 +1581,13 @@
 
 # Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
 
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
+# Copyright (C) 1997-2012 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 6
+# serial 7
 
 # AM_MISSING_PROG(NAME, PROGRAM)
 # ------------------------------
@@ -775,45 +1617,19 @@
   am_missing_run="$MISSING --run "
 else
   am_missing_run=
-  AC_MSG_WARN([`missing' script is too old or missing])
+  AC_MSG_WARN(['missing' script is too old or missing])
 fi
 ])
 
-# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_MKDIR_P
-# ---------------
-# Check for `mkdir -p'.
-AC_DEFUN([AM_PROG_MKDIR_P],
-[AC_PREREQ([2.60])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
-dnl while keeping a definition of mkdir_p for backward compatibility.
-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
-dnl Makefile.ins that do not define MKDIR_P, so we do our own
-dnl adjustment using top_builddir (which is defined more often than
-dnl MKDIR_P).
-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
-case $mkdir_p in
-  [[\\/$]]* | ?:[[\\/]]*) ;;
-  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-])
-
 # Helper functions for option handling.                     -*- Autoconf -*-
 
-# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
+# Copyright (C) 2001-2012 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 4
+# serial 6
 
 # _AM_MANGLE_OPTION(NAME)
 # -----------------------
@@ -821,13 +1637,13 @@
 [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
 
 # _AM_SET_OPTION(NAME)
-# ------------------------------
+# --------------------
 # Set option NAME.  Presently that only means defining a flag for this option.
 AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
 
 # _AM_SET_OPTIONS(OPTIONS)
-# ----------------------------------
+# ------------------------
 # OPTIONS is a space-separated list of Automake options.
 AC_DEFUN([_AM_SET_OPTIONS],
 [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
@@ -840,22 +1656,18 @@
 
 # Check to make sure that the build environment is sane.    -*- Autoconf -*-
 
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
-# Free Software Foundation, Inc.
+# Copyright (C) 1996-2012 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 5
+# serial 9
 
 # AM_SANITY_CHECK
 # ---------------
 AC_DEFUN([AM_SANITY_CHECK],
 [AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
 # Reject unsafe characters in $srcdir or the absolute working directory
 # name.  Accept space and tab only in the latter.
 am_lf='
@@ -866,32 +1678,40 @@
 esac
 case $srcdir in
   *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
-    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+    AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
 esac
 
-# Do `set' in a subshell so we don't clobber the current shell's
+# Do 'set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
 if (
-   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
-   if test "$[*]" = "X"; then
-      # -L didn't work.
-      set X `ls -t "$srcdir/configure" conftest.file`
-   fi
-   rm -f conftest.file
-   if test "$[*]" != "X $srcdir/configure conftest.file" \
-      && test "$[*]" != "X conftest.file $srcdir/configure"; then
+   am_has_slept=no
+   for am_try in 1 2; do
+     echo "timestamp, slept: $am_has_slept" > conftest.file
+     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+     if test "$[*]" = "X"; then
+	# -L didn't work.
+	set X `ls -t "$srcdir/configure" conftest.file`
+     fi
+     if test "$[*]" != "X $srcdir/configure conftest.file" \
+	&& test "$[*]" != "X conftest.file $srcdir/configure"; then
 
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
+	# If neither matched, then we have a broken ls.  This can happen
+	# if, for instance, CONFIG_SHELL is bash and it inherits a
+	# broken ls alias from the environment.  This has actually
+	# happened.  Such a system could not be considered "sane".
+	AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+  alias in your environment])
+     fi
+     if test "$[2]" = conftest.file || test $am_try -eq 2; then
+       break
+     fi
+     # Just in case.
+     sleep 1
+     am_has_slept=yes
+   done
    test "$[2]" = conftest.file
    )
 then
@@ -901,37 +1721,25 @@
    AC_MSG_ERROR([newly created file is older than distributed files!
 Check your system clock])
 fi
-AC_MSG_RESULT(yes)])
-
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor `install' (even GNU) is that you can't
-# specify the program used to strip binaries.  This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
-if test "$cross_compiling" != no; then
-  AC_CHECK_TOOL([STRIP], [strip], :)
+AC_MSG_RESULT([yes])
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+  ( sleep 1 ) &
+  am_sleep_pid=$!
 fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
+AC_CONFIG_COMMANDS_PRE(
+  [AC_MSG_CHECKING([that generated files are newer than configure])
+   if test -n "$am_sleep_pid"; then
+     # Hide warnings about reused PIDs.
+     wait $am_sleep_pid 2>/dev/null
+   fi
+   AC_MSG_RESULT([done])])
+rm -f conftest.file
+])
 
-# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
+# Copyright (C) 2001-2012 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -939,6 +1747,36 @@
 
 # serial 2
 
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor 'install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in "make install-strip", and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip".  However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
 # _AM_SUBST_NOTMAKE(VARIABLE)
 # ---------------------------
 # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
@@ -946,24 +1784,24 @@
 AC_DEFUN([_AM_SUBST_NOTMAKE])
 
 # AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
+# --------------------------
 # Public sister of _AM_SUBST_NOTMAKE.
 AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
 
 # Check how to create a tarball.                            -*- Autoconf -*-
 
-# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2004-2012 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 2
+# serial 3
 
 # _AM_PROG_TAR(FORMAT)
 # --------------------
 # Check how to create a tarball in format FORMAT.
-# FORMAT should be one of `v7', `ustar', or `pax'.
+# FORMAT should be one of 'v7', 'ustar', or 'pax'.
 #
 # Substitute a variable $(am__tar) that is a command
 # writing to stdout a FORMAT-tarball containing the directory
@@ -974,10 +1812,11 @@
 # a tarball read from stdin.
 #     $(am__untar) < result.tar
 AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.
-AM_MISSING_PROG([AMTAR], [tar])
+[# Always define AMTAR for backward compatibility.  Yes, it's still used
+# in the wild :-(  We should find a proper way to deprecate it ...
+AC_SUBST([AMTAR], ['$${TAR-tar}'])
 m4_if([$1], [v7],
-     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+     [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
      [m4_case([$1], [ustar],, [pax],,
               [m4_fatal([Unknown tar format])])
 AC_MSG_CHECKING([how to create a $1 tar archive])
@@ -985,7 +1824,7 @@
 _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
 _am_tools=${am_cv_prog_tar_$1-$_am_tools}
 # Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of `-'.
+# Solaris sh will not grok spaces in the rhs of '-'.
 for _am_tool in $_am_tools
 do
   case $_am_tool in
@@ -1046,6 +1885,16 @@
 AC_SUBST([am__untar])
 ]) # _AM_PROG_TAR
 
+m4_include([m4/asmcfi.m4])
+m4_include([m4/ax_append_flag.m4])
+m4_include([m4/ax_cc_maxopt.m4])
+m4_include([m4/ax_cflags_warn_all.m4])
+m4_include([m4/ax_check_compile_flag.m4])
+m4_include([m4/ax_compiler_vendor.m4])
+m4_include([m4/ax_configure_args.m4])
+m4_include([m4/ax_enable_builddir.m4])
+m4_include([m4/ax_gcc_archflag.m4])
+m4_include([m4/ax_gcc_x86_cpuid.m4])
 m4_include([m4/libtool.m4])
 m4_include([m4/ltoptions.m4])
 m4_include([m4/ltsugar.m4])
diff --git a/Modules/_ctypes/libffi/build-ios.sh b/Modules/_ctypes/libffi/build-ios.sh
new file mode 100755
index 0000000..3dea242
--- /dev/null
+++ b/Modules/_ctypes/libffi/build-ios.sh
@@ -0,0 +1,67 @@
+#!/bin/sh
+
+PLATFORM_IOS=/Developer/Platforms/iPhoneOS.platform/
+PLATFORM_IOS_SIM=/Developer/Platforms/iPhoneSimulator.platform/
+SDK_IOS_VERSION="4.2"
+MIN_IOS_VERSION="3.0"
+OUTPUT_DIR="universal-ios"
+
+build_target () {
+    local platform=$1
+    local sdk=$2
+    local arch=$3
+    local triple=$4
+    local builddir=$5
+
+    mkdir -p "${builddir}"
+    pushd "${builddir}"
+    export CC="${platform}"/Developer/usr/bin/gcc-4.2
+    export CFLAGS="-arch ${arch} -isysroot ${sdk} -miphoneos-version-min=${MIN_IOS_VERSION}"
+    ../configure --host=${triple} && make
+    popd
+}
+
+# Build all targets
+build_target "${PLATFORM_IOS}" "${PLATFORM_IOS}/Developer/SDKs/iPhoneOS${SDK_IOS_VERSION}.sdk/" armv6 arm-apple-darwin10 armv6-ios
+build_target "${PLATFORM_IOS}" "${PLATFORM_IOS}/Developer/SDKs/iPhoneOS${SDK_IOS_VERSION}.sdk/" armv7 arm-apple-darwin10 armv7-ios
+build_target "${PLATFORM_IOS_SIM}" "${PLATFORM_IOS_SIM}/Developer/SDKs/iPhoneSimulator${SDK_IOS_VERSION}.sdk/" i386 i386-apple-darwin10 i386-ios-sim
+
+# Create universal output directories
+mkdir -p "${OUTPUT_DIR}"
+mkdir -p "${OUTPUT_DIR}/include"
+mkdir -p "${OUTPUT_DIR}/include/armv6"
+mkdir -p "${OUTPUT_DIR}/include/armv7"
+mkdir -p "${OUTPUT_DIR}/include/i386"
+
+# Create the universal binary
+lipo -create armv6-ios/.libs/libffi.a armv7-ios/.libs/libffi.a i386-ios-sim/.libs/libffi.a -output "${OUTPUT_DIR}/libffi.a"
+
+# Copy in the headers
+copy_headers () {
+    local src=$1
+    local dest=$2
+
+    # Fix non-relative header reference
+    sed 's/<ffitarget.h>/"ffitarget.h"/' < "${src}/include/ffi.h" > "${dest}/ffi.h"
+    cp "${src}/include/ffitarget.h" "${dest}"
+}
+
+copy_headers armv6-ios "${OUTPUT_DIR}/include/armv6"
+copy_headers armv7-ios "${OUTPUT_DIR}/include/armv7"
+copy_headers i386-ios-sim "${OUTPUT_DIR}/include/i386"
+
+# Create top-level header
+(
+cat << EOF
+#ifdef __arm__
+  #include <arm/arch.h>
+  #ifdef _ARM_ARCH_6
+    #include "include/armv6/ffi.h"
+  #elif _ARM_ARCH_7
+    #include "include/armv7/ffi.h"
+  #endif
+#elif defined(__i386__)
+  #include "include/i386/ffi.h"
+#endif
+EOF
+) > "${OUTPUT_DIR}/ffi.h"
diff --git a/Modules/_ctypes/libffi/compile b/Modules/_ctypes/libffi/compile
index 1b1d232..c0096a7 100755
--- a/Modules/_ctypes/libffi/compile
+++ b/Modules/_ctypes/libffi/compile
@@ -1,9 +1,10 @@
 #! /bin/sh
 # Wrapper for compilers which do not understand `-c -o'.
 
-scriptversion=2005-05-14.22
+scriptversion=2009-10-06.20; # UTC
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2009  Free Software
+# Foundation, Inc.
 # Written by Tom Tromey <tromey@cygnus.com>.
 #
 # This program is free software; you can redistribute it and/or modify
@@ -17,8 +18,7 @@
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -103,13 +103,13 @@
 fi
 
 # Name of file we expect compiler to create.
-cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
 
 # Create the lock directory.
-# Note: use `[/.-]' here to ensure that we don't use the same name
+# Note: use `[/\\:.-]' here to ensure that we don't use the same name
 # that we are using for the .o file.  Also, base the name on the expected
 # object file name, since that is what matters with a parallel build.
-lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
 while true; do
   if mkdir "$lockdir" >/dev/null 2>&1; then
     break
@@ -124,9 +124,9 @@
 ret=$?
 
 if test -f "$cofile"; then
-  mv "$cofile" "$ofile"
+  test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
 elif test -f "${cofile}bj"; then
-  mv "${cofile}bj" "$ofile"
+  test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
 fi
 
 rmdir "$lockdir"
@@ -138,5 +138,6 @@
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End:
diff --git a/Modules/_ctypes/libffi/config.guess b/Modules/_ctypes/libffi/config.guess
index d53e309..1804e9f 100755
--- a/Modules/_ctypes/libffi/config.guess
+++ b/Modules/_ctypes/libffi/config.guess
@@ -1,14 +1,14 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
-#   Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
+#   2011, 2012, 2013 Free Software Foundation, Inc.
 
-timestamp='2009-11-19'
+timestamp='2012-12-29'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
 # (at your option) any later version.
 #
 # This program is distributed in the hope that it will be useful, but
@@ -17,26 +17,22 @@
 # General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Originally written by Per Bothner.  Please send patches (context
-# diff format) to <config-patches@gnu.org> and include a ChangeLog
-# entry.
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
 #
-# This script attempts to guess a canonical system name similar to
-# config.sub.  If it succeeds, it prints the system name on stdout, and
-# exits with 0.  Otherwise, it exits with 1.
+# Originally written by Per Bothner. 
 #
 # You can get the latest version of this script from:
 # http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+#
+# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+
 
 me=`echo "$0" | sed -e 's,.*/,,'`
 
@@ -56,8 +52,9 @@
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011,
+2012, 2013 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -144,7 +141,7 @@
 case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     *:NetBSD:*:*)
 	# NetBSD (nbsd) targets should (where applicable) match one or
-	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
 	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
 	# switched to ELF, *-*-netbsd* would select the old
 	# object file format.  This provides both forward
@@ -180,7 +177,7 @@
 		fi
 		;;
 	    *)
-	        os=netbsd
+		os=netbsd
 		;;
 	esac
 	# The OS release
@@ -201,6 +198,10 @@
 	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
 	echo "${machine}-${os}${release}"
 	exit ;;
+    *:Bitrig:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE}
+	exit ;;
     *:OpenBSD:*:*)
 	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
 	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
@@ -223,7 +224,7 @@
 		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
 		;;
 	*5.*)
-	        UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
 		;;
 	esac
 	# According to Compaq, /usr/sbin/psrinfo has been available on
@@ -269,7 +270,10 @@
 	# A Xn.n version is an unreleased experimental baselevel.
 	# 1.2 uses "1.2" for uname -r.
 	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-	exit ;;
+	# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
+	exitcode=$?
+	trap '' 0
+	exit $exitcode ;;
     Alpha\ *:Windows_NT*:*)
 	# How do we know it's Interix rather than the generic POSIX subsystem?
 	# Should we change UNAME_MACHINE based on the output of uname instead
@@ -295,12 +299,12 @@
 	echo s390-ibm-zvmoe
 	exit ;;
     *:OS400:*:*)
-        echo powerpc-ibm-os400
+	echo powerpc-ibm-os400
 	exit ;;
     arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
 	echo arm-acorn-riscix${UNAME_RELEASE}
 	exit ;;
-    arm:riscos:*:*|arm:RISCOS:*:*)
+    arm*:riscos:*:*|arm*:RISCOS:*:*)
 	echo arm-unknown-riscos
 	exit ;;
     SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
@@ -333,6 +337,9 @@
     sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
 	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
+    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+	echo i386-pc-auroraux${UNAME_RELEASE}
+	exit ;;
     i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
 	eval $set_cc_for_build
 	SUN_ARCH="i386"
@@ -391,23 +398,23 @@
     # MiNT.  But MiNT is downward compatible to TOS, so this should
     # be no problem.
     atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
-        echo m68k-atari-mint${UNAME_RELEASE}
+	echo m68k-atari-mint${UNAME_RELEASE}
 	exit ;;
     atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
 	echo m68k-atari-mint${UNAME_RELEASE}
-        exit ;;
+	exit ;;
     *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
-        echo m68k-atari-mint${UNAME_RELEASE}
+	echo m68k-atari-mint${UNAME_RELEASE}
 	exit ;;
     milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
-        echo m68k-milan-mint${UNAME_RELEASE}
-        exit ;;
+	echo m68k-milan-mint${UNAME_RELEASE}
+	exit ;;
     hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
-        echo m68k-hades-mint${UNAME_RELEASE}
-        exit ;;
+	echo m68k-hades-mint${UNAME_RELEASE}
+	exit ;;
     *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
-        echo m68k-unknown-mint${UNAME_RELEASE}
-        exit ;;
+	echo m68k-unknown-mint${UNAME_RELEASE}
+	exit ;;
     m68k:machten:*:*)
 	echo m68k-apple-machten${UNAME_RELEASE}
 	exit ;;
@@ -477,8 +484,8 @@
 	echo m88k-motorola-sysv3
 	exit ;;
     AViiON:dgux:*:*)
-        # DG/UX returns AViiON for all architectures
-        UNAME_PROCESSOR=`/usr/bin/uname -p`
+	# DG/UX returns AViiON for all architectures
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
 	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
 	then
 	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
@@ -491,7 +498,7 @@
 	else
 	    echo i586-dg-dgux${UNAME_RELEASE}
 	fi
- 	exit ;;
+	exit ;;
     M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
 	echo m88k-dolphin-sysv3
 	exit ;;
@@ -548,7 +555,7 @@
 		echo rs6000-ibm-aix3.2
 	fi
 	exit ;;
-    *:AIX:*:[456])
+    *:AIX:*:[4567])
 	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
 	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
 		IBM_ARCH=rs6000
@@ -591,52 +598,52 @@
 	    9000/[678][0-9][0-9])
 		if [ -x /usr/bin/getconf ]; then
 		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
-                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
-                    case "${sc_cpu_version}" in
-                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
-                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
-                      532)                      # CPU_PA_RISC2_0
-                        case "${sc_kernel_bits}" in
-                          32) HP_ARCH="hppa2.0n" ;;
-                          64) HP_ARCH="hppa2.0w" ;;
+		    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+		    case "${sc_cpu_version}" in
+		      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+		      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+		      532)                      # CPU_PA_RISC2_0
+			case "${sc_kernel_bits}" in
+			  32) HP_ARCH="hppa2.0n" ;;
+			  64) HP_ARCH="hppa2.0w" ;;
 			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
-                        esac ;;
-                    esac
+			esac ;;
+		    esac
 		fi
 		if [ "${HP_ARCH}" = "" ]; then
 		    eval $set_cc_for_build
-		    sed 's/^              //' << EOF >$dummy.c
+		    sed 's/^		//' << EOF >$dummy.c
 
-              #define _HPUX_SOURCE
-              #include <stdlib.h>
-              #include <unistd.h>
+		#define _HPUX_SOURCE
+		#include <stdlib.h>
+		#include <unistd.h>
 
-              int main ()
-              {
-              #if defined(_SC_KERNEL_BITS)
-                  long bits = sysconf(_SC_KERNEL_BITS);
-              #endif
-                  long cpu  = sysconf (_SC_CPU_VERSION);
+		int main ()
+		{
+		#if defined(_SC_KERNEL_BITS)
+		    long bits = sysconf(_SC_KERNEL_BITS);
+		#endif
+		    long cpu  = sysconf (_SC_CPU_VERSION);
 
-                  switch (cpu)
-              	{
-              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
-              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
-              	case CPU_PA_RISC2_0:
-              #if defined(_SC_KERNEL_BITS)
-              	    switch (bits)
-              		{
-              		case 64: puts ("hppa2.0w"); break;
-              		case 32: puts ("hppa2.0n"); break;
-              		default: puts ("hppa2.0"); break;
-              		} break;
-              #else  /* !defined(_SC_KERNEL_BITS) */
-              	    puts ("hppa2.0"); break;
-              #endif
-              	default: puts ("hppa1.0"); break;
-              	}
-                  exit (0);
-              }
+		    switch (cpu)
+			{
+			case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+			case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+			case CPU_PA_RISC2_0:
+		#if defined(_SC_KERNEL_BITS)
+			    switch (bits)
+				{
+				case 64: puts ("hppa2.0w"); break;
+				case 32: puts ("hppa2.0n"); break;
+				default: puts ("hppa2.0"); break;
+				} break;
+		#else  /* !defined(_SC_KERNEL_BITS) */
+			    puts ("hppa2.0"); break;
+		#endif
+			default: puts ("hppa1.0"); break;
+			}
+		    exit (0);
+		}
 EOF
 		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
 		    test -z "$HP_ARCH" && HP_ARCH=hppa
@@ -727,22 +734,22 @@
 	exit ;;
     C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
 	echo c1-convex-bsd
-        exit ;;
+	exit ;;
     C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
 	if getsysinfo -f scalar_acc
 	then echo c32-convex-bsd
 	else echo c2-convex-bsd
 	fi
-        exit ;;
+	exit ;;
     C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
 	echo c34-convex-bsd
-        exit ;;
+	exit ;;
     C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
 	echo c38-convex-bsd
-        exit ;;
+	exit ;;
     C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
 	echo c4-convex-bsd
-        exit ;;
+	exit ;;
     CRAY*Y-MP:*:*:*)
 	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
 	exit ;;
@@ -766,14 +773,14 @@
 	exit ;;
     F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
 	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
-        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-        exit ;;
+	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+	FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+	echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
     5000:UNIX_System_V:4.*:*)
-        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-        FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
-        echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+	FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+	echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
 	exit ;;
     i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
 	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
@@ -785,30 +792,35 @@
 	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
 	exit ;;
     *:FreeBSD:*:*)
-	case ${UNAME_MACHINE} in
-	    pc98)
-		echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
+	case ${UNAME_PROCESSOR} in
 	    amd64)
 		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
 	    *)
-		echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+		echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
 	esac
 	exit ;;
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
 	exit ;;
+    *:MINGW64*:*)
+	echo ${UNAME_MACHINE}-pc-mingw64
+	exit ;;
     *:MINGW*:*)
 	echo ${UNAME_MACHINE}-pc-mingw32
 	exit ;;
+    i*:MSYS*:*)
+	echo ${UNAME_MACHINE}-pc-msys
+	exit ;;
     i*:windows32*:*)
-    	# uname -m includes "-pc" on this system.
-    	echo ${UNAME_MACHINE}-mingw32
+	# uname -m includes "-pc" on this system.
+	echo ${UNAME_MACHINE}-mingw32
 	exit ;;
     i*:PW*:*)
 	echo ${UNAME_MACHINE}-pc-pw32
 	exit ;;
     *:Interix*:*)
-    	case ${UNAME_MACHINE} in
+	case ${UNAME_MACHINE} in
 	    x86)
 		echo i586-pc-interix${UNAME_RELEASE}
 		exit ;;
@@ -854,6 +866,13 @@
     i*86:Minix:*:*)
 	echo ${UNAME_MACHINE}-pc-minix
 	exit ;;
+    aarch64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    aarch64_be:Linux:*:*)
+	UNAME_MACHINE=aarch64_be
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
     alpha:Linux:*:*)
 	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
 	  EV5)   UNAME_MACHINE=alphaev5 ;;
@@ -863,7 +882,7 @@
 	  EV6)   UNAME_MACHINE=alphaev6 ;;
 	  EV67)  UNAME_MACHINE=alphaev67 ;;
 	  EV68*) UNAME_MACHINE=alphaev68 ;;
-        esac
+	esac
 	objdump --private-headers /bin/sh | grep -q ld.so.1
 	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
 	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
@@ -875,20 +894,29 @@
 	then
 	    echo ${UNAME_MACHINE}-unknown-linux-gnu
 	else
-	    echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+		| grep -q __ARM_PCS_VFP
+	    then
+		echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+	    else
+		echo ${UNAME_MACHINE}-unknown-linux-gnueabihf
+	    fi
 	fi
 	exit ;;
     avr32*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     cris:Linux:*:*)
-	echo cris-axis-linux-gnu
+	echo ${UNAME_MACHINE}-axis-linux-gnu
 	exit ;;
     crisv32:Linux:*:*)
-	echo crisv32-axis-linux-gnu
+	echo ${UNAME_MACHINE}-axis-linux-gnu
 	exit ;;
     frv:Linux:*:*)
-    	echo frv-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    hexagon:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     i*86:Linux:*:*)
 	LIBC=gnu
@@ -930,7 +958,7 @@
 	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
 	;;
     or32:Linux:*:*)
-	echo or32-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     padre:Linux:*:*)
 	echo sparc-unknown-linux-gnu
@@ -956,7 +984,7 @@
 	echo ${UNAME_MACHINE}-ibm-linux
 	exit ;;
     sh64*:Linux:*:*)
-    	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     sh*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
@@ -964,14 +992,17 @@
     sparc:Linux:*:* | sparc64:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
+    tile*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
     vax:Linux:*:*)
 	echo ${UNAME_MACHINE}-dec-linux-gnu
 	exit ;;
     x86_64:Linux:*:*)
-	echo x86_64-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     xtensa*:Linux:*:*)
-    	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     i*86:DYNIX/ptx:4*:*)
 	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
@@ -980,11 +1011,11 @@
 	echo i386-sequent-sysv4
 	exit ;;
     i*86:UNIX_SV:4.2MP:2.*)
-        # Unixware is an offshoot of SVR4, but it has its own version
-        # number series starting with 2...
-        # I am not positive that other SVR4 systems won't match this,
+	# Unixware is an offshoot of SVR4, but it has its own version
+	# number series starting with 2...
+	# I am not positive that other SVR4 systems won't match this,
 	# I just have to hope.  -- rms.
-        # Use sysv4.2uw... so that sysv4* matches it.
+	# Use sysv4.2uw... so that sysv4* matches it.
 	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
 	exit ;;
     i*86:OS/2:*:*)
@@ -1016,7 +1047,7 @@
 	fi
 	exit ;;
     i*86:*:5:[678]*)
-    	# UnixWare 7.x, OpenUNIX and OpenServer 6.
+	# UnixWare 7.x, OpenUNIX and OpenServer 6.
 	case `/bin/uname -X | grep "^Machine"` in
 	    *486*)	     UNAME_MACHINE=i486 ;;
 	    *Pentium)	     UNAME_MACHINE=i586 ;;
@@ -1044,13 +1075,13 @@
 	exit ;;
     pc:*:*:*)
 	# Left here for compatibility:
-        # uname -m prints for DJGPP always 'pc', but it prints nothing about
-        # the processor, so we play safe by assuming i586.
+	# uname -m prints for DJGPP always 'pc', but it prints nothing about
+	# the processor, so we play safe by assuming i586.
 	# Note: whatever this is, it MUST be the same as what config.sub
 	# prints for the "djgpp" host, or else GDB configury will decide that
 	# this is a cross-build.
 	echo i586-pc-msdosdjgpp
-        exit ;;
+	exit ;;
     Intel:Mach:3*:*)
 	echo i386-pc-mach3
 	exit ;;
@@ -1085,8 +1116,8 @@
 	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
 	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
     3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
-        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-          && { echo i486-ncr-sysv4; exit; } ;;
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4; exit; } ;;
     NCR*:*:4.2:* | MPRAS*:*:4.2:*)
 	OS_REL='.3'
 	test -r /etc/.relid \
@@ -1129,10 +1160,10 @@
 		echo ns32k-sni-sysv
 	fi
 	exit ;;
-    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-                      # says <Richard.M.Bartel@ccMail.Census.GOV>
-        echo i586-unisys-sysv4
-        exit ;;
+    PENTIUM:*:4.0*:*)	# Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+			# says <Richard.M.Bartel@ccMail.Census.GOV>
+	echo i586-unisys-sysv4
+	exit ;;
     *:UNIX_System_V:4*:FTX*)
 	# From Gerald Hewes <hewes@openmarket.com>.
 	# How about differentiating between stratus architectures? -djm
@@ -1158,11 +1189,11 @@
 	exit ;;
     R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
 	if [ -d /usr/nec ]; then
-	        echo mips-nec-sysv${UNAME_RELEASE}
+		echo mips-nec-sysv${UNAME_RELEASE}
 	else
-	        echo mips-unknown-sysv${UNAME_RELEASE}
+		echo mips-unknown-sysv${UNAME_RELEASE}
 	fi
-        exit ;;
+	exit ;;
     BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
 	echo powerpc-be-beos
 	exit ;;
@@ -1175,6 +1206,9 @@
     BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
 	echo i586-pc-haiku
 	exit ;;
+    x86_64:Haiku:*:*)
+	echo x86_64-unknown-haiku
+	exit ;;
     SX-4:SUPER-UX:*:*)
 	echo sx4-nec-superux${UNAME_RELEASE}
 	exit ;;
@@ -1227,7 +1261,10 @@
     *:QNX:*:4*)
 	echo i386-pc-qnx
 	exit ;;
-    NSE-?:NONSTOP_KERNEL:*:*)
+    NEO-?:NONSTOP_KERNEL:*:*)
+	echo neo-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSE-*:NONSTOP_KERNEL:*:*)
 	echo nse-tandem-nsk${UNAME_RELEASE}
 	exit ;;
     NSR-?:NONSTOP_KERNEL:*:*)
@@ -1272,13 +1309,13 @@
 	echo pdp10-unknown-its
 	exit ;;
     SEI:*:*:SEIUX)
-        echo mips-sei-seiux${UNAME_RELEASE}
+	echo mips-sei-seiux${UNAME_RELEASE}
 	exit ;;
     *:DragonFly:*:*)
 	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
 	exit ;;
     *:*VMS:*:*)
-    	UNAME_MACHINE=`(uname -p) 2>/dev/null`
+	UNAME_MACHINE=`(uname -p) 2>/dev/null`
 	case "${UNAME_MACHINE}" in
 	    A*) echo alpha-dec-vms ; exit ;;
 	    I*) echo ia64-dec-vms ; exit ;;
@@ -1296,11 +1333,11 @@
     i*86:AROS:*:*)
 	echo ${UNAME_MACHINE}-pc-aros
 	exit ;;
+    x86_64:VMkernel:*:*)
+	echo ${UNAME_MACHINE}-unknown-esx
+	exit ;;
 esac
 
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
 eval $set_cc_for_build
 cat >$dummy.c <<EOF
 #ifdef _SEQUENT_
@@ -1318,11 +1355,11 @@
 #include <sys/param.h>
   printf ("m68k-sony-newsos%s\n",
 #ifdef NEWSOS4
-          "4"
+	"4"
 #else
-	  ""
+	""
 #endif
-         ); exit (0);
+	); exit (0);
 #endif
 #endif
 
diff --git a/Modules/_ctypes/libffi/config.sub b/Modules/_ctypes/libffi/config.sub
index 17c9145..802a224 100755
--- a/Modules/_ctypes/libffi/config.sub
+++ b/Modules/_ctypes/libffi/config.sub
@@ -1,38 +1,33 @@
 #! /bin/sh
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
-#   Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
+#   2011, 2012, 2013 Free Software Foundation, Inc.
 
-timestamp='2009-11-07'
+timestamp='2012-12-29'
 
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine.  It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
 # (at your option) any later version.
 #
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
 
 
-# Please send patches to <config-patches@gnu.org>.  Submit a context
-# diff and a properly formatted GNU ChangeLog entry.
+# Please send patches with a ChangeLog entry to config-patches@gnu.org.
 #
 # Configuration subroutine to validate and canonicalize a configuration type.
 # Supply the specified configuration type as an argument.
@@ -75,8 +70,9 @@
 version="\
 GNU config.sub ($timestamp)
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011,
+2012, 2013 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -123,13 +119,18 @@
 # Here we must recognize all the valid KERNEL-OS combinations.
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
-  nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
-  uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
+  nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
+  linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+  knetbsd*-gnu* | netbsd*-gnu* | \
   kopensolaris*-gnu* | \
   storm-chaos* | os2-emx* | rtmk-nova*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
     ;;
+  android-linux)
+    os=-linux-android
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
+    ;;
   *)
     basic_machine=`echo $1 | sed 's/-[^-]*$//'`
     if [ $basic_machine != $1 ]
@@ -152,12 +153,12 @@
 	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
 	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
 	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple | -axis | -knuth | -cray | -microblaze)
+	-apple | -axis | -knuth | -cray | -microblaze*)
 		os=
 		basic_machine=$1
 		;;
-        -bluegene*)
-	        os=-cnk
+	-bluegene*)
+		os=-cnk
 		;;
 	-sim | -cisco | -oki | -wec | -winbond)
 		os=
@@ -173,10 +174,10 @@
 		os=-chorusos
 		basic_machine=$1
 		;;
- 	-chorusrdb)
- 		os=-chorusrdb
+	-chorusrdb)
+		os=-chorusrdb
 		basic_machine=$1
- 		;;
+		;;
 	-hiux*)
 		os=-hiuxwe2
 		;;
@@ -221,6 +222,12 @@
 	-isc*)
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
+	-lynx*178)
+		os=-lynxos178
+		;;
+	-lynx*5)
+		os=-lynxos5
+		;;
 	-lynx*)
 		os=-lynxos
 		;;
@@ -245,20 +252,27 @@
 	# Some are omitted here because they have special meanings below.
 	1750a | 580 \
 	| a29k \
+	| aarch64 | aarch64_be \
 	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
 	| am33_2.0 \
-	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+	| arc \
+	| arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
+	| avr | avr32 \
+	| be32 | be64 \
 	| bfin \
 	| c4x | clipper \
 	| d10v | d30v | dlx | dsp16xx \
+	| epiphany \
 	| fido | fr30 | frv \
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+	| hexagon \
 	| i370 | i860 | i960 | ia64 \
 	| ip2k | iq2000 \
+	| le32 | le64 \
 	| lm32 \
 	| m32c | m32r | m32rle | m68000 | m68k | m88k \
-	| maxq | mb | microblaze | mcore | mep | metag \
+	| maxq | mb | microblaze | microblazeel | mcore | mep | metag \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
@@ -281,29 +295,39 @@
 	| moxie \
 	| mt \
 	| msp430 \
+	| nds32 | nds32le | nds32be \
 	| nios | nios2 \
 	| ns16k | ns32k \
+	| open8 \
 	| or32 \
 	| pdp10 | pdp11 | pj | pjl \
-	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+	| powerpc | powerpc64 | powerpc64le | powerpcle \
 	| pyramid \
-	| rx \
+	| rl78 | rx \
 	| score \
 	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
 	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
 	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
-	| spu | strongarm \
-	| tahoe | thumb | tic4x | tic80 | tron \
+	| spu \
+	| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
 	| ubicom32 \
-	| v850 | v850e \
+	| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
 	| we32k \
-	| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
+	| x86 | xc16x | xstormy16 | xtensa \
 	| z8k | z80)
 		basic_machine=$basic_machine-unknown
 		;;
-	m6811 | m68hc11 | m6812 | m68hc12 | picochip)
-		# Motorola 68HC11/12.
+	c54x)
+		basic_machine=tic54x-unknown
+		;;
+	c55x)
+		basic_machine=tic55x-unknown
+		;;
+	c6x)
+		basic_machine=tic6x-unknown
+		;;
+	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
 		basic_machine=$basic_machine-unknown
 		os=-none
 		;;
@@ -313,6 +337,21 @@
 		basic_machine=mt-unknown
 		;;
 
+	strongarm | thumb | xscale)
+		basic_machine=arm-unknown
+		;;
+	xgate)
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	xscaleeb)
+		basic_machine=armeb-unknown
+		;;
+
+	xscaleel)
+		basic_machine=armel-unknown
+		;;
+
 	# We use `pc' rather than `unknown'
 	# because (1) that's what they normally are, and
 	# (2) the word "unknown" tends to confuse beginning users.
@@ -327,25 +366,30 @@
 	# Recognize the basic CPU types with company name.
 	580-* \
 	| a29k-* \
+	| aarch64-* | aarch64_be-* \
 	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
 	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
 	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
 	| avr-* | avr32-* \
+	| be32-* | be64-* \
 	| bfin-* | bs2000-* \
-	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
+	| c[123]* | c30-* | [cjt]90-* | c4x-* \
 	| clipper-* | craynv-* | cydra-* \
 	| d10v-* | d30v-* | dlx-* \
 	| elxsi-* \
 	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
 	| h8300-* | h8500-* \
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+	| hexagon-* \
 	| i*86-* | i860-* | i960-* | ia64-* \
 	| ip2k-* | iq2000-* \
+	| le32-* | le64-* \
 	| lm32-* \
 	| m32c-* | m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
+	| microblaze-* | microblazeel-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
 	| mips16-* \
 	| mips64-* | mips64el-* \
@@ -367,25 +411,29 @@
 	| mmix-* \
 	| mt-* \
 	| msp430-* \
+	| nds32-* | nds32le-* | nds32be-* \
 	| nios-* | nios2-* \
 	| none-* | np1-* | ns16k-* | ns32k-* \
+	| open8-* \
 	| orion-* \
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
-	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
+	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
 	| pyramid-* \
-	| romp-* | rs6000-* | rx-* \
+	| rl78-* | romp-* | rs6000-* | rx-* \
 	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
 	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
 	| sparclite-* \
-	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
-	| tahoe-* | thumb-* \
-	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
+	| tahoe-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tile*-* \
 	| tron-* \
 	| ubicom32-* \
-	| v850-* | v850e-* | vax-* \
+	| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
+	| vax-* \
 	| we32k-* \
-	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
+	| x86-* | x86_64-* | xc16x-* | xps100-* \
 	| xstormy16-* | xtensa*-* \
 	| ymp-* \
 	| z8k-* | z80-*)
@@ -410,7 +458,7 @@
 		basic_machine=a29k-amd
 		os=-udi
 		;;
-    	abacus)
+	abacus)
 		basic_machine=abacus-unknown
 		;;
 	adobe68k)
@@ -480,11 +528,20 @@
 		basic_machine=powerpc-ibm
 		os=-cnk
 		;;
+	c54x-*)
+		basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c55x-*)
+		basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c6x-*)
+		basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
 	c90)
 		basic_machine=c90-cray
 		os=-unicos
 		;;
-        cegcc)
+	cegcc)
 		basic_machine=arm-unknown
 		os=-cegcc
 		;;
@@ -516,7 +573,7 @@
 		basic_machine=craynv-cray
 		os=-unicosmp
 		;;
-	cr16)
+	cr16 | cr16-*)
 		basic_machine=cr16-unknown
 		os=-elf
 		;;
@@ -674,7 +731,6 @@
 	i370-ibm* | ibm*)
 		basic_machine=i370-ibm
 		;;
-# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
 	i*86v32)
 		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
 		os=-sysv32
@@ -732,9 +788,13 @@
 		basic_machine=ns32k-utek
 		os=-sysv
 		;;
-        microblaze)
+	microblaze*)
 		basic_machine=microblaze-xilinx
 		;;
+	mingw64)
+		basic_machine=x86_64-pc
+		os=-mingw64
+		;;
 	mingw32)
 		basic_machine=i386-pc
 		os=-mingw32
@@ -771,10 +831,18 @@
 	ms1-*)
 		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
 		;;
+	msys)
+		basic_machine=i386-pc
+		os=-msys
+		;;
 	mvs)
 		basic_machine=i370-ibm
 		os=-mvs
 		;;
+	nacl)
+		basic_machine=le32-unknown
+		os=-nacl
+		;;
 	ncr3000)
 		basic_machine=i486-ncr
 		os=-sysv4
@@ -839,6 +907,12 @@
 	np1)
 		basic_machine=np1-gould
 		;;
+	neo-tandem)
+		basic_machine=neo-tandem
+		;;
+	nse-tandem)
+		basic_machine=nse-tandem
+		;;
 	nsr-tandem)
 		basic_machine=nsr-tandem
 		;;
@@ -921,9 +995,10 @@
 		;;
 	power)	basic_machine=power-ibm
 		;;
-	ppc)	basic_machine=powerpc-unknown
+	ppc | ppcbe)	basic_machine=powerpc-unknown
 		;;
-	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+	ppc-* | ppcbe-*)
+		basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
 	ppcle | powerpclittle | ppc-le | powerpc-little)
 		basic_machine=powerpcle-unknown
@@ -948,7 +1023,11 @@
 		basic_machine=i586-unknown
 		os=-pw32
 		;;
-	rdos)
+	rdos | rdos64)
+		basic_machine=x86_64-pc
+		os=-rdos
+		;;
+	rdos32)
 		basic_machine=i386-pc
 		os=-rdos
 		;;
@@ -1017,6 +1096,9 @@
 		basic_machine=i860-stratus
 		os=-sysv4
 		;;
+	strongarm-* | thumb-*)
+		basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
 	sun2)
 		basic_machine=m68000-sun
 		;;
@@ -1073,20 +1155,8 @@
 		basic_machine=t90-cray
 		os=-unicos
 		;;
-	tic54x | c54x*)
-		basic_machine=tic54x-unknown
-		os=-coff
-		;;
-	tic55x | c55x*)
-		basic_machine=tic55x-unknown
-		os=-coff
-		;;
-	tic6x | c6x*)
-		basic_machine=tic6x-unknown
-		os=-coff
-		;;
 	tile*)
-		basic_machine=tile-unknown
+		basic_machine=$basic_machine-unknown
 		os=-linux-gnu
 		;;
 	tx39)
@@ -1156,6 +1226,9 @@
 	xps | xps100)
 		basic_machine=xps100-honeywell
 		;;
+	xscale-* | xscalee[bl]-*)
+		basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
+		;;
 	ymp)
 		basic_machine=ymp-cray
 		os=-unicos
@@ -1253,9 +1326,12 @@
 if [ x"$os" != x"" ]
 then
 case $os in
-        # First match some system type aliases
-        # that might get confused with valid system types.
+	# First match some system type aliases
+	# that might get confused with valid system types.
 	# -solaris* is a basic system type, with this one exception.
+	-auroraux)
+		os=-auroraux
+		;;
 	-solaris1 | -solaris1.*)
 		os=`echo $os | sed -e 's|solaris1|sunos4|'`
 		;;
@@ -1277,21 +1353,22 @@
 	# -sysv* is not here because it comes later, after sysvr4.
 	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
 	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
-	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
-	      | -kopensolaris* \
+	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
+	      | -sym* | -kopensolaris* \
 	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
 	      | -aos* | -aros* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
 	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
-	      | -openbsd* | -solidbsd* \
+	      | -bitrig* | -openbsd* | -solidbsd* \
 	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
 	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
 	      | -chorusos* | -chorusrdb* | -cegcc* \
-	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
+	      | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
+	      | -linux-newlib* | -linux-musl* | -linux-uclibc* \
 	      | -uxpv* | -beos* | -mpeix* | -udk* \
 	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
@@ -1338,7 +1415,7 @@
 	-opened*)
 		os=-openedition
 		;;
-        -os400*)
+	-os400*)
 		os=-os400
 		;;
 	-wince*)
@@ -1387,7 +1464,7 @@
 	-sinix*)
 		os=-sysv4
 		;;
-        -tpf*)
+	-tpf*)
 		os=-tpf
 		;;
 	-triton*)
@@ -1432,6 +1509,8 @@
 	-dicos*)
 		os=-dicos
 		;;
+	-nacl*)
+		;;
 	-none)
 		;;
 	*)
@@ -1454,10 +1533,10 @@
 # system, and we'll never get to this point.
 
 case $basic_machine in
-        score-*)
+	score-*)
 		os=-elf
 		;;
-        spu-*)
+	spu-*)
 		os=-elf
 		;;
 	*-acorn)
@@ -1469,8 +1548,20 @@
 	arm*-semi)
 		os=-aout
 		;;
-        c4x-* | tic4x-*)
-        	os=-coff
+	c4x-* | tic4x-*)
+		os=-coff
+		;;
+	hexagon-*)
+		os=-elf
+		;;
+	tic54x-*)
+		os=-coff
+		;;
+	tic55x-*)
+		os=-coff
+		;;
+	tic6x-*)
+		os=-coff
 		;;
 	# This must come before the *-dec entry.
 	pdp10-*)
@@ -1490,14 +1581,11 @@
 		;;
 	m68000-sun)
 		os=-sunos3
-		# This also exists in the configure program, but was not the
-		# default.
-		# os=-sunos4
 		;;
 	m68*-cisco)
 		os=-aout
 		;;
-        mep-*)
+	mep-*)
 		os=-elf
 		;;
 	mips*-cisco)
@@ -1524,7 +1612,7 @@
 	*-ibm)
 		os=-aix
 		;;
-    	*-knuth)
+	*-knuth)
 		os=-mmixware
 		;;
 	*-wec)
diff --git a/Modules/_ctypes/libffi/configure b/Modules/_ctypes/libffi/configure
index e5ba047..8230830 100755
--- a/Modules/_ctypes/libffi/configure
+++ b/Modules/_ctypes/libffi/configure
@@ -1,13 +1,11 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.65 for libffi 3.0.10rc0.
+# Generated by GNU Autoconf 2.69 for libffi 3.0.13.
 #
-# Report bugs to <http://gcc.gnu.org/bugs.html>.
+# Report bugs to <http://github.com/atgreen/libffi/issues>.
 #
 #
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
 #
 #
 # This configure script is free software; the Free Software Foundation
@@ -91,6 +89,7 @@
 IFS=" ""	$as_nl"
 
 # Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
 case $0 in #((
   *[\\/]* ) as_myself=$0 ;;
   *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -135,6 +134,31 @@
 # CDPATH.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
+# Use a proper internal environment variable to ensure we don't fall
+  # into an infinite loop, continuously re-executing ourselves.
+  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+    _as_can_reexec=no; export _as_can_reexec;
+    # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+  fi
+  # We don't want this to propagate to other subprocesses.
+          { _as_can_reexec=; unset _as_can_reexec;}
 if test "x$CONFIG_SHELL" = x; then
   as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
   emulate sh
@@ -168,11 +192,20 @@
 else
   exitcode=1; echo positional parameters were not saved.
 fi
-test x\$exitcode = x0 || exit 1"
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
   as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
   as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
   eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
   test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+
+  test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+      || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
 test \$(( 1 + 1 )) = 2 || exit 1"
   if (eval "$as_required") 2>/dev/null; then :
   as_have_required=yes
@@ -213,14 +246,25 @@
 
 
       if test "x$CONFIG_SHELL" != x; then :
-  # We cannot yet assume a decent shell, so we have to provide a
-	# neutralization value for shells without unset; and this also
-	# works around shells that cannot unset nonexistent variables.
-	BASH_ENV=/dev/null
-	ENV=/dev/null
-	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-	export CONFIG_SHELL
-	exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+  export CONFIG_SHELL
+             # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
 fi
 
     if test x$as_have_required = xno; then :
@@ -231,8 +275,8 @@
     $as_echo "$0: be upgraded to zsh 4.3.4 or later."
   else
     $as_echo "$0: Please tell bug-autoconf@gnu.org and
-$0: http://gcc.gnu.org/bugs.html about your system,
-$0: including any error possibly output before this
+$0: http://github.com/atgreen/libffi/issues about your
+$0: system, including any error possibly output before this
 $0: message. Then install a modern shell, or manually run
 $0: the script under such a shell if you do have one."
   fi
@@ -319,10 +363,18 @@
       test -d "$as_dir" && break
     done
     test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
 
 
 } # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
 # as_fn_append VAR VALUE
 # ----------------------
 # Append the text in VALUE to the end of the definition contained in VAR. Take
@@ -359,19 +411,19 @@
 fi # as_fn_arith
 
 
-# as_fn_error ERROR [LINENO LOG_FD]
-# ---------------------------------
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
 # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
 # provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with status $?, using 1 if that was 0.
+# script with STATUS, using 1 if that was 0.
 as_fn_error ()
 {
-  as_status=$?; test $as_status -eq 0 && as_status=1
-  if test "$3"; then
-    as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-    $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
   fi
-  $as_echo "$as_me: error: $1" >&2
+  $as_echo "$as_me: error: $2" >&2
   as_fn_exit $as_status
 } # as_fn_error
 
@@ -444,6 +496,10 @@
   chmod +x "$as_me.lineno" ||
     { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
 
+  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+  # already done that, so ensure we don't try to do so again and fall
+  # in an infinite loop.  This has already happened in practice.
+  _as_can_reexec=no; export _as_can_reexec
   # Don't try to exec as it changes $[0], causing all sort of problems
   # (the dirname of $[0] is not the place where we might find the
   # original and so on.  Autoconf is especially sensitive to this).
@@ -478,16 +534,16 @@
     # ... but there are two gotchas:
     # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
     # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -p'.
+    # In both cases, we have to default to `cp -pR'.
     ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -p'
+      as_ln_s='cp -pR'
   elif ln conf$$.file conf$$ 2>/dev/null; then
     as_ln_s=ln
   else
-    as_ln_s='cp -p'
+    as_ln_s='cp -pR'
   fi
 else
-  as_ln_s='cp -p'
+  as_ln_s='cp -pR'
 fi
 rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
 rmdir conf$$.dir 2>/dev/null
@@ -499,28 +555,8 @@
   as_mkdir_p=false
 fi
 
-if test -x / >/dev/null 2>&1; then
-  as_test_x='test -x'
-else
-  if ls -dL / >/dev/null 2>&1; then
-    as_ls_L_option=L
-  else
-    as_ls_L_option=
-  fi
-  as_test_x='
-    eval sh -c '\''
-      if test -d "$1"; then
-	test -d "$1/.";
-      else
-	case $1 in #(
-	-*)set "./$1";;
-	esac;
-	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
-	???[sx]*):;;*)false;;esac;fi
-    '\'' sh
-  '
-fi
-as_executable_p=$as_test_x
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -528,161 +564,14 @@
 # Sed expression to map a string onto a valid variable name.
 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
-
-
-# Check that we are running under the correct shell.
 SHELL=${CONFIG_SHELL-/bin/sh}
 
-case X$lt_ECHO in
-X*--fallback-echo)
-  # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','`
-  ;;
-esac
-
-ECHO=${lt_ECHO-echo}
-if test "X$1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X$1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
-  # Yippee, $ECHO works!
-  :
-else
-  # Restart under the correct shell.
-  exec $SHELL "$0" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<_LT_EOF
-$*
-_LT_EOF
-  exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test -z "$lt_ECHO"; then
-  if test "X${echo_test_string+set}" != Xset; then
-    # find a string as large as possible, as long as the shell can cope with it
-    for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
-      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
-	 { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
-      then
-        break
-      fi
-    done
-  fi
-
-  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
-     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
-     test "X$echo_testing_string" = "X$echo_test_string"; then
-    :
-  else
-    # The Solaris, AIX, and Digital Unix default echo programs unquote
-    # backslashes.  This makes it impossible to quote backslashes using
-    #   echo "$something" | sed 's/\\/\\\\/g'
-    #
-    # So, first we look for a working echo in the user's PATH.
-
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for dir in $PATH /usr/ucb; do
-      IFS="$lt_save_ifs"
-      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-         test "X$echo_testing_string" = "X$echo_test_string"; then
-        ECHO="$dir/echo"
-        break
-      fi
-    done
-    IFS="$lt_save_ifs"
-
-    if test "X$ECHO" = Xecho; then
-      # We didn't find a better echo, so look for alternatives.
-      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
-         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
-         test "X$echo_testing_string" = "X$echo_test_string"; then
-        # This shell has a builtin print -r that does the trick.
-        ECHO='print -r'
-      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
-	   test "X$CONFIG_SHELL" != X/bin/ksh; then
-        # If we have ksh, try running configure again with it.
-        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-        export ORIGINAL_CONFIG_SHELL
-        CONFIG_SHELL=/bin/ksh
-        export CONFIG_SHELL
-        exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
-      else
-        # Try using printf.
-        ECHO='printf %s\n'
-        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
-	   echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	  # Cool, printf works
-	  :
-        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-	     test "X$echo_testing_string" = 'X\t' &&
-	     echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	     test "X$echo_testing_string" = "X$echo_test_string"; then
-	  CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	  export CONFIG_SHELL
-	  SHELL="$CONFIG_SHELL"
-	  export SHELL
-	  ECHO="$CONFIG_SHELL $0 --fallback-echo"
-        elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-	     test "X$echo_testing_string" = 'X\t' &&
-	     echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	     test "X$echo_testing_string" = "X$echo_test_string"; then
-	  ECHO="$CONFIG_SHELL $0 --fallback-echo"
-        else
-	  # maybe with a smaller string...
-	  prev=:
-
-	  for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
-	    if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
-	    then
-	      break
-	    fi
-	    prev="$cmd"
-	  done
-
-	  if test "$prev" != 'sed 50q "$0"'; then
-	    echo_test_string=`eval $prev`
-	    export echo_test_string
-	    exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
-	  else
-	    # Oops.  We lost completely, so just stick with echo.
-	    ECHO=echo
-	  fi
-        fi
-      fi
-    fi
-  fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-lt_ECHO=$ECHO
-if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
-   lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
-fi
-
-
-
 
 test -n "$DJDIR" || exec 7<&0 </dev/null
 exec 6>&1
 
 # Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
 # so uname gets run too.
 ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
 
@@ -701,9 +590,9 @@
 # Identity of this package.
 PACKAGE_NAME='libffi'
 PACKAGE_TARNAME='libffi'
-PACKAGE_VERSION='3.0.10rc0'
-PACKAGE_STRING='libffi 3.0.10rc0'
-PACKAGE_BUGREPORT='http://gcc.gnu.org/bugs.html'
+PACKAGE_VERSION='3.0.13'
+PACKAGE_STRING='libffi 3.0.13'
+PACKAGE_BUGREPORT='http://github.com/atgreen/libffi/issues'
 PACKAGE_URL=''
 
 # Factoring default headers for most tests.
@@ -748,10 +637,20 @@
 LIBOBJS
 toolexeclibdir
 toolexecdir
+FFI_DEBUG_FALSE
+FFI_DEBUG_TRUE
 TARGETDIR
 TARGET
+FFI_EXEC_TRAMPOLINE_TABLE
+FFI_EXEC_TRAMPOLINE_TABLE_FALSE
+FFI_EXEC_TRAMPOLINE_TABLE_TRUE
+sys_symbol_underscore
 HAVE_LONG_DOUBLE
 ALLOCA
+XTENSA_FALSE
+XTENSA_TRUE
+TILE_FALSE
+TILE_TRUE
 PA64_HPUX_FALSE
 PA64_HPUX_TRUE
 PA_HPUX_FALSE
@@ -774,6 +673,8 @@
 AVR32_TRUE
 ARM_FALSE
 ARM_TRUE
+AARCH64_FALSE
+AARCH64_TRUE
 POWERPC_FREEBSD_FALSE
 POWERPC_FREEBSD_TRUE
 POWERPC_DARWIN_FALSE
@@ -782,6 +683,12 @@
 POWERPC_AIX_TRUE
 POWERPC_FALSE
 POWERPC_TRUE
+MOXIE_FALSE
+MOXIE_TRUE
+METAG_FALSE
+METAG_TRUE
+MICROBLAZE_FALSE
+MICROBLAZE_TRUE
 M68K_FALSE
 M68K_TRUE
 M32R_FALSE
@@ -802,6 +709,8 @@
 X86_TRUE
 SPARC_FALSE
 SPARC_TRUE
+BFIN_FALSE
+BFIN_TRUE
 MIPS_FALSE
 MIPS_TRUE
 AM_LTLDFLAGS
@@ -811,15 +720,18 @@
 MAINT
 MAINTAINER_MODE_FALSE
 MAINTAINER_MODE_TRUE
+PRTDIAG
 CPP
 OTOOL64
 OTOOL
 LIPO
 NMEDIT
 DSYMUTIL
-lt_ECHO
+MANIFEST_TOOL
 RANLIB
+ac_ct_AR
 AR
+DLLTOOL
 OBJDUMP
 LN_S
 NM
@@ -839,6 +751,7 @@
 am__fastdepCC_FALSE
 am__fastdepCC_TRUE
 CCDEPMODE
+am__nodep
 AMDEPBACKSLASH
 AMDEP_FALSE
 AMDEP_TRUE
@@ -875,6 +788,7 @@
 INSTALL_DATA
 INSTALL_SCRIPT
 INSTALL_PROGRAM
+ax_enable_builddir_sed
 target_os
 target_vendor
 target_cpu
@@ -928,14 +842,19 @@
 ac_subst_files=''
 ac_user_opts='
 enable_option_checking
+enable_builddir
 enable_dependency_tracking
 enable_shared
 enable_static
 with_pic
 enable_fast_install
 with_gnu_ld
+with_sysroot
 enable_libtool_lock
+enable_portable_binary
+with_gcc_arch
 enable_maintainer_mode
+enable_pax_emutramp
 enable_debug
 enable_structs
 enable_raw_api
@@ -1010,8 +929,9 @@
   fi
 
   case $ac_option in
-  *=*)	ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
-  *)	ac_optarg=yes ;;
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
   esac
 
   # Accept the important Cygnus configure options, so we can diagnose typos.
@@ -1056,7 +976,7 @@
     ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error "invalid feature name: $ac_useropt"
+      as_fn_error $? "invalid feature name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1082,7 +1002,7 @@
     ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error "invalid feature name: $ac_useropt"
+      as_fn_error $? "invalid feature name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1286,7 +1206,7 @@
     ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error "invalid package name: $ac_useropt"
+      as_fn_error $? "invalid package name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1302,7 +1222,7 @@
     ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error "invalid package name: $ac_useropt"
+      as_fn_error $? "invalid package name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1332,8 +1252,8 @@
   | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
     x_libraries=$ac_optarg ;;
 
-  -*) as_fn_error "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information."
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
     ;;
 
   *=*)
@@ -1341,7 +1261,7 @@
     # Reject names that are not valid shell variable names.
     case $ac_envvar in #(
       '' | [0-9]* | *[!_$as_cr_alnum]* )
-      as_fn_error "invalid variable name: \`$ac_envvar'" ;;
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
     esac
     eval $ac_envvar=\$ac_optarg
     export $ac_envvar ;;
@@ -1351,7 +1271,7 @@
     $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
     expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
       $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
     ;;
 
   esac
@@ -1359,13 +1279,13 @@
 
 if test -n "$ac_prev"; then
   ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  as_fn_error "missing argument to $ac_option"
+  as_fn_error $? "missing argument to $ac_option"
 fi
 
 if test -n "$ac_unrecognized_opts"; then
   case $enable_option_checking in
     no) ;;
-    fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
     *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
   esac
 fi
@@ -1388,7 +1308,7 @@
     [\\/$]* | ?:[\\/]* )  continue;;
     NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
   esac
-  as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
 done
 
 # There might be people who depend on the old broken behavior: `$host'
@@ -1402,8 +1322,6 @@
 if test "x$host_alias" != x; then
   if test "x$build_alias" = x; then
     cross_compiling=maybe
-    $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
-    If a cross compiler is detected then cross compile mode will be used." >&2
   elif test "x$build_alias" != "x$host_alias"; then
     cross_compiling=yes
   fi
@@ -1418,9 +1336,9 @@
 ac_pwd=`pwd` && test -n "$ac_pwd" &&
 ac_ls_di=`ls -di .` &&
 ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-  as_fn_error "working directory cannot be determined"
+  as_fn_error $? "working directory cannot be determined"
 test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-  as_fn_error "pwd does not report name of working directory"
+  as_fn_error $? "pwd does not report name of working directory"
 
 
 # Find the source files, if location was not specified.
@@ -1459,11 +1377,11 @@
 fi
 if test ! -r "$srcdir/$ac_unique_file"; then
   test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-  as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
 fi
 ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
 ac_abs_confdir=`(
-	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
 	pwd)`
 # When building in place, set srcdir=.
 if test "$ac_abs_confdir" = "$ac_pwd"; then
@@ -1489,7 +1407,7 @@
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures libffi 3.0.10rc0 to adapt to many kinds of systems.
+\`configure' configures libffi 3.0.13 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1503,7 +1421,7 @@
       --help=short        display options specific to this package
       --help=recursive    display the short help of all the included packages
   -V, --version           display version information and exit
-  -q, --quiet, --silent   do not print \`checking...' messages
+  -q, --quiet, --silent   do not print \`checking ...' messages
       --cache-file=FILE   cache test results in FILE [disabled]
   -C, --config-cache      alias for \`--cache-file=config.cache'
   -n, --no-create         do not create output files
@@ -1560,7 +1478,7 @@
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of libffi 3.0.10rc0:";;
+     short | recursive ) echo "Configuration of libffi 3.0.13:";;
    esac
   cat <<\_ACEOF
 
@@ -1568,15 +1486,24 @@
   --disable-option-checking  ignore unrecognized --enable/--with options
   --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --disable-dependency-tracking  speeds up one-time build
-  --enable-dependency-tracking   do not reject slow dependency extractors
+  --disable-builddir      disable automatic build in subdir of sources
+
+  --enable-dependency-tracking
+                          do not reject slow dependency extractors
+  --disable-dependency-tracking
+                          speeds up one-time build
   --enable-shared[=PKGS]  build shared libraries [default=yes]
   --enable-static[=PKGS]  build static libraries [default=yes]
   --enable-fast-install[=PKGS]
                           optimize for fast installation [default=yes]
   --disable-libtool-lock  avoid locking (might break parallel builds)
-  --enable-maintainer-mode  enable make rules and dependencies not useful
-			  (and sometimes confusing) to the casual installer
+  --enable-portable-binary
+                          disable compiler optimizations that would produce
+                          unportable binaries
+  --enable-maintainer-mode
+                          enable make rules and dependencies not useful (and
+                          sometimes confusing) to the casual installer
+  --enable-pax_emutramp       enable pax emulated trampolines, for we can't use PROT_EXEC
   --enable-debug          debugging mode
   --disable-structs       omit code for struct support
   --disable-raw-api       make the raw api unavailable
@@ -1585,9 +1512,13 @@
 Optional Packages:
   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --with-pic              try to use only PIC/non-PIC objects [default=use
+  --with-pic[=PKGS]       try to use only PIC/non-PIC objects [default=use
                           both]
   --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-sysroot=DIR Search for dependent libraries within DIR
+                        (or the compiler's sysroot if not specified).
+  --with-gcc-arch=<arch>  use architecture <arch> for gcc -march/-mtune,
+                          instead of guessing
 
 Some influential environment variables:
   CC          C compiler command
@@ -1604,7 +1535,7 @@
 Use these variables to override the choices made by `configure' or to help
 it to find libraries and programs with nonstandard names/locations.
 
-Report bugs to <http://gcc.gnu.org/bugs.html>.
+Report bugs to <http://github.com/atgreen/libffi/issues>.
 _ACEOF
 ac_status=$?
 fi
@@ -1667,10 +1598,10 @@
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-libffi configure 3.0.10rc0
-generated by GNU Autoconf 2.65
+libffi configure 3.0.13
+generated by GNU Autoconf 2.69
 
-Copyright (C) 2009 Free Software Foundation, Inc.
+Copyright (C) 2012 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
@@ -1714,7 +1645,7 @@
 
 	ac_retval=1
 fi
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
   as_fn_set_status $ac_retval
 
 } # ac_fn_c_try_compile
@@ -1746,7 +1677,7 @@
 	 test ! -s conftest.err
        } && test -s conftest$ac_exeext && {
 	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
+	 test -x conftest$ac_exeext
        }; then :
   ac_retval=0
 else
@@ -1760,7 +1691,7 @@
   # interfere with the next link command; also delete a directory that is
   # left behind by Apple's compiler.  We do this before executing the actions.
   rm -rf conftest.dSYM conftest_ipa8_conftest.oo
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
   as_fn_set_status $ac_retval
 
 } # ac_fn_c_try_link
@@ -1774,7 +1705,7 @@
   as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
 $as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$3+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -1792,7 +1723,7 @@
 eval ac_res=\$$3
 	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
 $as_echo "$ac_res" >&6; }
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
 
 } # ac_fn_c_check_header_compile
 
@@ -1817,7 +1748,7 @@
     mv -f conftest.er1 conftest.err
   fi
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } >/dev/null && {
+  test $ac_status = 0; } > conftest.i && {
 	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
 	 test ! -s conftest.err
        }; then :
@@ -1828,7 +1759,7 @@
 
     ac_retval=1
 fi
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
   as_fn_set_status $ac_retval
 
 } # ac_fn_c_try_cpp
@@ -1870,7 +1801,7 @@
        ac_retval=$ac_status
 fi
   rm -rf conftest.dSYM conftest_ipa8_conftest.oo
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
   as_fn_set_status $ac_retval
 
 } # ac_fn_c_try_run
@@ -1883,7 +1814,7 @@
   as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
 $as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$3+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -1938,103 +1869,10 @@
 eval ac_res=\$$3
 	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
 $as_echo "$ac_res" >&6; }
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
 
 } # ac_fn_c_check_func
 
-# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
-# -------------------------------------------------------
-# Tests whether HEADER exists, giving a warning if it cannot be compiled using
-# the include files in INCLUDES and setting the cache variable VAR
-# accordingly.
-ac_fn_c_check_header_mongrel ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
-  $as_echo_n "(cached) " >&6
-fi
-eval ac_res=\$$3
-	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
-$as_echo_n "checking $2 usability... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-$4
-#include <$2>
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_header_compiler=yes
-else
-  ac_header_compiler=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
-$as_echo_n "checking $2 presence... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <$2>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-  ac_header_preproc=yes
-else
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
-  yes:no: )
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $2:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
-( cat <<\_ASBOX
-## ------------------------------------------- ##
-## Report this to http://gcc.gnu.org/bugs.html ##
-## ------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
-  $as_echo_n "(cached) " >&6
-else
-  eval "$3=\$ac_header_compiler"
-fi
-eval ac_res=\$$3
-	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-fi
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-
-} # ac_fn_c_check_header_mongrel
-
 # ac_fn_c_compute_int LINENO EXPR VAR INCLUDES
 # --------------------------------------------
 # Tries to find the compile-time value of EXPR in a program that includes
@@ -2052,7 +1890,8 @@
 main ()
 {
 static int test_array [1 - 2 * !(($2) >= 0)];
-test_array [0] = 0
+test_array [0] = 0;
+return test_array [0];
 
   ;
   return 0;
@@ -2068,7 +1907,8 @@
 main ()
 {
 static int test_array [1 - 2 * !(($2) <= $ac_mid)];
-test_array [0] = 0
+test_array [0] = 0;
+return test_array [0];
 
   ;
   return 0;
@@ -2094,7 +1934,8 @@
 main ()
 {
 static int test_array [1 - 2 * !(($2) < 0)];
-test_array [0] = 0
+test_array [0] = 0;
+return test_array [0];
 
   ;
   return 0;
@@ -2110,7 +1951,8 @@
 main ()
 {
 static int test_array [1 - 2 * !(($2) >= $ac_mid)];
-test_array [0] = 0
+test_array [0] = 0;
+return test_array [0];
 
   ;
   return 0;
@@ -2144,7 +1986,8 @@
 main ()
 {
 static int test_array [1 - 2 * !(($2) <= $ac_mid)];
-test_array [0] = 0
+test_array [0] = 0;
+return test_array [0];
 
   ;
   return 0;
@@ -2208,16 +2051,161 @@
 rm -f conftest.val
 
   fi
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
   as_fn_set_status $ac_retval
 
 } # ac_fn_c_compute_int
+
+# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_c_check_header_mongrel ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if eval \${$3+:} false; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+  # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_header_compiler=yes
+else
+  ac_header_compiler=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <$2>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  ac_header_preproc=yes
+else
+  ac_header_preproc=no
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
+  yes:no: )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+    ;;
+  no:yes:* )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2:     check for missing prerequisite headers?" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+( $as_echo "## ------------------------------------------------------ ##
+## Report this to http://github.com/atgreen/libffi/issues ##
+## ------------------------------------------------------ ##"
+     ) | sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
+esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_mongrel
+
+# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
+# -------------------------------------------
+# Tests whether TYPE exists after having included INCLUDES, setting cache
+# variable VAR accordingly.
+ac_fn_c_check_type ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=no"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof ($2))
+	 return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof (($2)))
+	    return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  eval "$3=yes"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_type
 cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by libffi $as_me 3.0.10rc0, which was
-generated by GNU Autoconf 2.65.  Invocation command line was
+It was created by libffi $as_me 3.0.13, which was
+generated by GNU Autoconf 2.69.  Invocation command line was
 
   $ $0 $@
 
@@ -2327,11 +2315,9 @@
   {
     echo
 
-    cat <<\_ASBOX
-## ---------------- ##
+    $as_echo "## ---------------- ##
 ## Cache variables. ##
-## ---------------- ##
-_ASBOX
+## ---------------- ##"
     echo
     # The following way of writing the cache mishandles newlines in values,
 (
@@ -2365,11 +2351,9 @@
 )
     echo
 
-    cat <<\_ASBOX
-## ----------------- ##
+    $as_echo "## ----------------- ##
 ## Output variables. ##
-## ----------------- ##
-_ASBOX
+## ----------------- ##"
     echo
     for ac_var in $ac_subst_vars
     do
@@ -2382,11 +2366,9 @@
     echo
 
     if test -n "$ac_subst_files"; then
-      cat <<\_ASBOX
-## ------------------- ##
+      $as_echo "## ------------------- ##
 ## File substitutions. ##
-## ------------------- ##
-_ASBOX
+## ------------------- ##"
       echo
       for ac_var in $ac_subst_files
       do
@@ -2400,11 +2382,9 @@
     fi
 
     if test -s confdefs.h; then
-      cat <<\_ASBOX
-## ----------- ##
+      $as_echo "## ----------- ##
 ## confdefs.h. ##
-## ----------- ##
-_ASBOX
+## ----------- ##"
       echo
       cat confdefs.h
       echo
@@ -2459,7 +2439,12 @@
 ac_site_file1=NONE
 ac_site_file2=NONE
 if test -n "$CONFIG_SITE"; then
-  ac_site_file1=$CONFIG_SITE
+  # We do not want a PATH search for config.site.
+  case $CONFIG_SITE in #((
+    -*)  ac_site_file1=./$CONFIG_SITE;;
+    */*) ac_site_file1=$CONFIG_SITE;;
+    *)   ac_site_file1=./$CONFIG_SITE;;
+  esac
 elif test "x$prefix" != xNONE; then
   ac_site_file1=$prefix/share/config.site
   ac_site_file2=$prefix/etc/config.site
@@ -2474,7 +2459,11 @@
     { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
 $as_echo "$as_me: loading site script $ac_site_file" >&6;}
     sed 's/^/| /' "$ac_site_file" >&5
-    . "$ac_site_file"
+    . "$ac_site_file" \
+      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
   fi
 done
 
@@ -2550,7 +2539,7 @@
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
   { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
 fi
 ## -------------------- ##
 ## Main body of script. ##
@@ -2568,16 +2557,22 @@
 
 ac_aux_dir=
 for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
-  for ac_t in install-sh install.sh shtool; do
-    if test -f "$ac_dir/$ac_t"; then
-      ac_aux_dir=$ac_dir
-      ac_install_sh="$ac_aux_dir/$ac_t -c"
-      break 2
-    fi
-  done
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
 done
 if test -z "$ac_aux_dir"; then
-  as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+  as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
 fi
 
 # These three variables are undocumented and unsupported,
@@ -2591,27 +2586,27 @@
 
 # Make sure we can run config.sub.
 $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-  as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
 $as_echo_n "checking build system type... " >&6; }
-if test "${ac_cv_build+set}" = set; then :
+if ${ac_cv_build+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_build_alias=$build_alias
 test "x$ac_build_alias" = x &&
   ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
 test "x$ac_build_alias" = x &&
-  as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5
+  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
 ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-  as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
 $as_echo "$ac_cv_build" >&6; }
 case $ac_cv_build in
 *-*-*) ;;
-*) as_fn_error "invalid value of canonical build" "$LINENO" 5;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
 esac
 build=$ac_cv_build
 ac_save_IFS=$IFS; IFS='-'
@@ -2629,14 +2624,14 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
 $as_echo_n "checking host system type... " >&6; }
-if test "${ac_cv_host+set}" = set; then :
+if ${ac_cv_host+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test "x$host_alias" = x; then
   ac_cv_host=$ac_cv_build
 else
   ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
-    as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
 fi
 
 fi
@@ -2644,7 +2639,7 @@
 $as_echo "$ac_cv_host" >&6; }
 case $ac_cv_host in
 *-*-*) ;;
-*) as_fn_error "invalid value of canonical host" "$LINENO" 5;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
 esac
 host=$ac_cv_host
 ac_save_IFS=$IFS; IFS='-'
@@ -2662,14 +2657,14 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
 $as_echo_n "checking target system type... " >&6; }
-if test "${ac_cv_target+set}" = set; then :
+if ${ac_cv_target+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test "x$target_alias" = x; then
   ac_cv_target=$ac_cv_host
 else
   ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
-    as_fn_error "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
 fi
 
 fi
@@ -2677,7 +2672,7 @@
 $as_echo "$ac_cv_target" >&6; }
 case $ac_cv_target in
 *-*-*) ;;
-*) as_fn_error "invalid value of canonical target" "$LINENO" 5;;
+*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;;
 esac
 target=$ac_cv_target
 ac_save_IFS=$IFS; IFS='-'
@@ -2704,7 +2699,111 @@
 
 . ${srcdir}/configure.host
 
-am__api_version='1.11'
+
+   # [$]@ is unsable in 2.60+ but earlier autoconf had no ac_configure_args
+   if test "${ac_configure_args+set}" != "set" ; then
+      ac_configure_args=
+      for ac_arg in ${1+"$@"}; do
+         ac_configure_args="$ac_configure_args '$ac_arg'"
+      done
+   fi
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+
+ax_enable_builddir="."
+# Check whether --enable-builddir was given.
+if test "${enable_builddir+set}" = set; then :
+  enableval=$enable_builddir; ax_enable_builddir="$enableval"
+else
+  ax_enable_builddir="auto"
+fi
+
+if test ".$ac_srcdir_defaulted" != ".no" ; then
+if test ".$srcdir" = ".." ; then
+  if test -f config.status ; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: toplevel srcdir already configured... skipping subdir build" >&5
+$as_echo "$as_me: toplevel srcdir already configured... skipping subdir build" >&6;}
+  else
+    test ".$ax_enable_builddir" = "."  && ax_enable_builddir="."
+    test ".$ax_enable_builddir" = ".no"  && ax_enable_builddir="."
+    test ".$TARGET" = "." && TARGET="$target"
+    test ".$ax_enable_builddir" = ".auto" && ax_enable_builddir="$TARGET"
+    if test ".$ax_enable_builddir" != ".." ; then    # we know where to go and
+      as_dir=$ax_enable_builddir; as_fn_mkdir_p
+      echo __.$ax_enable_builddir.__ > $ax_enable_builddir/conftest.tmp
+      cd $ax_enable_builddir
+      if grep __.$ax_enable_builddir.__ conftest.tmp >/dev/null 2>/dev/null ; then
+        rm conftest.tmp
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: continue configure in default builddir \"./$ax_enable_builddir\"" >&5
+$as_echo "continue configure in default builddir \"./$ax_enable_builddir\"" >&6; }
+      else
+        as_fn_error $? "could not change to default builddir \"./$ax_enable_builddir\"" "$LINENO" 5
+      fi
+      srcdir=`echo "$ax_enable_builddir" |
+              sed -e 's,^\./,,;s,[^/]$,&/,;s,[^/]*/,../,g;s,[/]$,,;'`
+      # going to restart from subdirectory location
+      test -f $srcdir/config.log   && mv $srcdir/config.log   .
+      test -f $srcdir/confdefs.h   && mv $srcdir/confdefs.h   .
+      test -f $srcdir/conftest.log && mv $srcdir/conftest.log .
+      test -f $srcdir/$cache_file  && mv $srcdir/$cache_file  .
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: ....exec $SHELL $srcdir/$0 \"--srcdir=$srcdir\" \"--enable-builddir=$ax_enable_builddir\" ${1+\"$@\"}" >&5
+$as_echo "....exec $SHELL $srcdir/$0 \"--srcdir=$srcdir\" \"--enable-builddir=$ax_enable_builddir\" ${1+\"$@\"}" >&6; }
+      case "$0" in # restart
+       /\\*) eval $SHELL "'$0'" "'--srcdir=$srcdir'" "'--enable-builddir=$ax_enable_builddir'" $ac_configure_args ;;
+       *) eval $SHELL "'$srcdir/$0'" "'--srcdir=$srcdir'" "'--enable-builddir=$ax_enable_builddir'" $ac_configure_args ;;
+      esac ; exit $?
+    fi
+  fi
+fi fi
+test ".$ax_enable_builddir" = ".auto" && ax_enable_builddir="."
+# Extract the first word of "gsed sed", so it can be a program name with args.
+set dummy gsed sed; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_ax_enable_builddir_sed+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $ax_enable_builddir_sed in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_ax_enable_builddir_sed="$ax_enable_builddir_sed" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_ax_enable_builddir_sed="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  test -z "$ac_cv_path_ax_enable_builddir_sed" && ac_cv_path_ax_enable_builddir_sed="sed"
+  ;;
+esac
+fi
+ax_enable_builddir_sed=$ac_cv_path_ax_enable_builddir_sed
+if test -n "$ax_enable_builddir_sed"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_enable_builddir_sed" >&5
+$as_echo "$ax_enable_builddir_sed" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ax_enable_builddir_auxdir="$am_aux_dir"
+ac_config_commands="$ac_config_commands buildir"
+
+
+am__api_version='1.12'
 
 # Find a good install program.  We prefer a C program (faster),
 # so one script is as good as another.  But avoid the broken or
@@ -2723,7 +2822,7 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
 $as_echo_n "checking for a BSD-compatible install... " >&6; }
 if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then :
+if ${ac_cv_path_install+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -2743,7 +2842,7 @@
     # by default.
     for ac_prog in ginstall scoinst install; do
       for ac_exec_ext in '' $ac_executable_extensions; do
-	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+	if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
 	  if test $ac_prog = install &&
 	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
@@ -2801,56 +2900,71 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
 $as_echo_n "checking whether build environment is sane... " >&6; }
-# Just in case
-sleep 1
-echo timestamp > conftest.file
 # Reject unsafe characters in $srcdir or the absolute working directory
 # name.  Accept space and tab only in the latter.
 am_lf='
 '
 case `pwd` in
   *[\\\"\#\$\&\'\`$am_lf]*)
-    as_fn_error "unsafe absolute working directory name" "$LINENO" 5;;
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
 esac
 case $srcdir in
   *[\\\"\#\$\&\'\`$am_lf\ \	]*)
-    as_fn_error "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+    as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
 esac
 
-# Do `set' in a subshell so we don't clobber the current shell's
+# Do 'set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
 if (
-   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t "$srcdir/configure" conftest.file`
-   fi
-   rm -f conftest.file
-   if test "$*" != "X $srcdir/configure conftest.file" \
-      && test "$*" != "X conftest.file $srcdir/configure"; then
+   am_has_slept=no
+   for am_try in 1 2; do
+     echo "timestamp, slept: $am_has_slept" > conftest.file
+     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+     if test "$*" = "X"; then
+	# -L didn't work.
+	set X `ls -t "$srcdir/configure" conftest.file`
+     fi
+     if test "$*" != "X $srcdir/configure conftest.file" \
+	&& test "$*" != "X conftest.file $srcdir/configure"; then
 
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      as_fn_error "ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" "$LINENO" 5
-   fi
-
+	# If neither matched, then we have a broken ls.  This can happen
+	# if, for instance, CONFIG_SHELL is bash and it inherits a
+	# broken ls alias from the environment.  This has actually
+	# happened.  Such a system could not be considered "sane".
+	as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
+  alias in your environment" "$LINENO" 5
+     fi
+     if test "$2" = conftest.file || test $am_try -eq 2; then
+       break
+     fi
+     # Just in case.
+     sleep 1
+     am_has_slept=yes
+   done
    test "$2" = conftest.file
    )
 then
    # Ok.
    :
 else
-   as_fn_error "newly created file is older than distributed files!
+   as_fn_error $? "newly created file is older than distributed files!
 Check your system clock" "$LINENO" 5
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+  ( sleep 1 ) &
+  am_sleep_pid=$!
+fi
+
+rm -f conftest.file
+
 test "$program_prefix" != NONE &&
   program_transform_name="s&^&$program_prefix&;$program_transform_name"
 # Use a double $ so make ignores it.
@@ -2861,9 +2975,6 @@
 ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
 program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
 
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-
 if test x"${MISSING+set}" != xset; then
   case $am_aux_dir in
   *\ * | *\	*)
@@ -2877,8 +2988,8 @@
   am_missing_run="$MISSING --run "
 else
   am_missing_run=
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
-$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
 fi
 
 if test x"${install_sh}" != xset; then
@@ -2890,17 +3001,17 @@
   esac
 fi
 
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip".  However 'strip' might not be the right
 # tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
+# will honor the 'STRIP' environment variable to overrule this program.
 if test "$cross_compiling" != no; then
   if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
 set dummy ${ac_tool_prefix}strip; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then :
+if ${ac_cv_prog_STRIP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$STRIP"; then
@@ -2912,7 +3023,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_STRIP="${ac_tool_prefix}strip"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2940,7 +3051,7 @@
 set dummy strip; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_STRIP"; then
@@ -2952,7 +3063,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_STRIP="strip"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2993,7 +3104,7 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
 if test -z "$MKDIR_P"; then
-  if test "${ac_cv_path_mkdir+set}" = set; then :
+  if ${ac_cv_path_mkdir+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -3003,7 +3114,7 @@
   test -z "$as_dir" && as_dir=.
     for ac_prog in mkdir gmkdir; do
 	 for ac_exec_ext in '' $ac_executable_extensions; do
-	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+	   as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
 	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
 	     'mkdir (GNU coreutils) '* | \
 	     'mkdir (coreutils) '* | \
@@ -3032,19 +3143,13 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
 $as_echo "$MKDIR_P" >&6; }
 
-mkdir_p="$MKDIR_P"
-case $mkdir_p in
-  [\\/$]* | ?:[\\/]*) ;;
-  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-
 for ac_prog in gawk mawk nawk awk
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AWK+set}" = set; then :
+if ${ac_cv_prog_AWK+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$AWK"; then
@@ -3056,7 +3161,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_AWK="$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -3084,7 +3189,7 @@
 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
 set x ${MAKE-make}
 ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat >conftest.make <<\_ACEOF
@@ -3092,7 +3197,7 @@
 all:
 	@echo '@@@%%%=$(MAKE)=@@@%%%'
 _ACEOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
 case `${MAKE-make} -f conftest.make 2>/dev/null` in
   *@@@%%%=?*=@@@%%%*)
     eval ac_cv_prog_make_${ac_make}_set=yes;;
@@ -3126,7 +3231,7 @@
   am__isrc=' -I$(srcdir)'
   # test to see if srcdir already configured
   if test -f $srcdir/config.status; then
-    as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
   fi
 fi
 
@@ -3142,7 +3247,7 @@
 
 # Define the identity of the package.
  PACKAGE='libffi'
- VERSION='3.0.10rc0'
+ VERSION='3.0.13'
 
 
 cat >>confdefs.h <<_ACEOF
@@ -3170,13 +3275,19 @@
 
 MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
 
+# For better backward compatibility.  To be removed once Automake 1.9.x
+# dies out for good.  For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+mkdir_p='$(MKDIR_P)'
+
 # We need awk for the "check" target.  The system "awk" is bad on
 # some platforms.
-# Always define AMTAR for backward compatibility.
+# Always define AMTAR for backward compatibility.  Yes, it's still used
+# in the wild :-(  We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
 
-AMTAR=${AMTAR-"${am_missing_run}tar"}
-
-am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
 
 
 
@@ -3187,9 +3298,12 @@
 # We must force CC to /not/ be precious variables; otherwise
 # the wrong, non-multilib-adjusted value will be used in multilibs.
 # As a side effect, we have to subst CFLAGS ourselves.
+# Also save and restore CFLAGS, since AC_PROG_CC will come up with
+# defaults of its own if none are provided.
 
 
 
+save_CFLAGS=$CFLAGS
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -3200,7 +3314,7 @@
 set dummy ${ac_tool_prefix}gcc; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
+if ${ac_cv_prog_CC+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -3212,7 +3326,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CC="${ac_tool_prefix}gcc"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -3240,7 +3354,7 @@
 set dummy gcc; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CC"; then
@@ -3252,7 +3366,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_CC="gcc"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -3293,7 +3407,7 @@
 set dummy ${ac_tool_prefix}cc; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
+if ${ac_cv_prog_CC+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -3305,7 +3419,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CC="${ac_tool_prefix}cc"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -3333,7 +3447,7 @@
 set dummy cc; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
+if ${ac_cv_prog_CC+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -3346,7 +3460,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
        continue
@@ -3392,7 +3506,7 @@
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
+if ${ac_cv_prog_CC+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -3404,7 +3518,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -3436,7 +3550,7 @@
 set dummy $ac_prog; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CC"; then
@@ -3448,7 +3562,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_CC="$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -3490,8 +3604,8 @@
 
 test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "no acceptable C compiler found in \$PATH
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
 
 # Provide some information about the compiler.
 $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
@@ -3605,9 +3719,8 @@
 
 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ as_fn_set_status 77
-as_fn_error "C compiler cannot create executables
-See \`config.log' for more details." "$LINENO" 5; }; }
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
@@ -3649,8 +3762,8 @@
 else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
 fi
 rm -f conftest conftest$ac_cv_exeext
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
@@ -3707,9 +3820,9 @@
     else
 	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot run C compiled programs.
+as_fn_error $? "cannot run C compiled programs.
 If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5; }
     fi
   fi
 fi
@@ -3720,7 +3833,7 @@
 ac_clean_files=$ac_clean_files_save
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
 $as_echo_n "checking for suffix of object files... " >&6; }
-if test "${ac_cv_objext+set}" = set; then :
+if ${ac_cv_objext+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -3760,8 +3873,8 @@
 
 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
 fi
 rm -f conftest.$ac_cv_objext conftest.$ac_ext
 fi
@@ -3771,7 +3884,7 @@
 ac_objext=$OBJEXT
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if test "${ac_cv_c_compiler_gnu+set}" = set; then :
+if ${ac_cv_c_compiler_gnu+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -3808,7 +3921,7 @@
 ac_save_CFLAGS=$CFLAGS
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
 $as_echo_n "checking whether $CC accepts -g... " >&6; }
-if test "${ac_cv_prog_cc_g+set}" = set; then :
+if ${ac_cv_prog_cc_g+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_save_c_werror_flag=$ac_c_werror_flag
@@ -3886,7 +3999,7 @@
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if test "${ac_cv_prog_cc_c89+set}" = set; then :
+if ${ac_cv_prog_cc_c89+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_cv_prog_cc_c89=no
@@ -3895,8 +4008,7 @@
 /* end confdefs.h.  */
 #include <stdarg.h>
 #include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
+struct stat;
 /* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
 struct buf { int x; };
 FILE * (*rcsopen) (struct buf *, struct stat *, int);
@@ -3999,7 +4111,7 @@
 _am_result=none
 # First try GNU make style include.
 echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
+# Ignore all kinds of additional output from 'make'.
 case `$am_make -s -f confmf 2> /dev/null` in #(
 *the\ am__doit\ target*)
   am__include=include
@@ -4032,6 +4144,7 @@
 if test "x$enable_dependency_tracking" != xno; then
   am_depcomp="$ac_aux_dir/depcomp"
   AMDEPBACKSLASH='\'
+  am__nodep='_no'
 fi
  if test "x$enable_dependency_tracking" != xno; then
   AMDEP_TRUE=
@@ -4047,15 +4160,16 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
 $as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then :
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
   # We make a subdir and do the tests there.  Otherwise we can end up
   # making bogus files that we don't know about and never remove.  For
   # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
+  rm -rf conftest.dir
   mkdir conftest.dir
   # Copy depcomp to subdir because otherwise we won't find it if we're
   # using a relative directory.
@@ -4089,16 +4203,16 @@
     : > sub/conftest.c
     for i in 1 2 3 4 5 6; do
       echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
     done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
     # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
     am__obj=sub/conftest.${OBJEXT-o}
     am__minus_obj="-o $am__obj"
     case $depmode in
@@ -4107,16 +4221,16 @@
       test "$am__universal" = false || continue
       ;;
     nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
       if test "x$enable_dependency_tracking" = xyes; then
 	continue
       else
 	break
       fi
       ;;
-    msvisualcpp | msvcmsys)
-      # This compiler won't grok `-c -o', but also, the minuso test has
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok '-c -o', but also, the minuso test has
       # not run yet.  These depmodes are late enough in the game, and
       # so weak that their functioning should not be impacted.
       am__obj=conftest.${OBJEXT-o}
@@ -4170,6 +4284,7 @@
 fi
 
 
+CFLAGS=$save_CFLAGS
 
 
 
@@ -4186,15 +4301,16 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
 $as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_CCAS_dependencies_compiler_type+set}" = set; then :
+if ${am_cv_CCAS_dependencies_compiler_type+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
   # We make a subdir and do the tests there.  Otherwise we can end up
   # making bogus files that we don't know about and never remove.  For
   # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
+  rm -rf conftest.dir
   mkdir conftest.dir
   # Copy depcomp to subdir because otherwise we won't find it if we're
   # using a relative directory.
@@ -4226,16 +4342,16 @@
     : > sub/conftest.c
     for i in 1 2 3 4 5 6; do
       echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
     done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
     # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
     am__obj=sub/conftest.${OBJEXT-o}
     am__minus_obj="-o $am__obj"
     case $depmode in
@@ -4244,16 +4360,16 @@
       test "$am__universal" = false || continue
       ;;
     nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
       if test "x$enable_dependency_tracking" = xyes; then
 	continue
       else
 	break
       fi
       ;;
-    msvisualcpp | msvcmsys)
-      # This compiler won't grok `-c -o', but also, the minuso test has
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok '-c -o', but also, the minuso test has
       # not run yet.  These depmodes are late enough in the game, and
       # so weak that their functioning should not be impacted.
       am__obj=conftest.${OBJEXT-o}
@@ -4316,7 +4432,7 @@
 fi
 set dummy $CC; ac_cc=`$as_echo "$2" |
 		      sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
-if { as_var=ac_cv_prog_cc_${ac_cc}_c_o; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${ac_cv_prog_cc_${ac_cc}_c_o+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -4441,8 +4557,8 @@
 
 
 
-macro_version='2.2.6'
-macro_revision='1.3012'
+macro_version='2.4.2'
+macro_revision='1.3337'
 
 
 
@@ -4458,9 +4574,78 @@
 
 ltmain="$ac_aux_dir/ltmain.sh"
 
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='printf %s\n'
+else
+  # Use this function as a fallback that always works.
+  func_fallback_echo ()
+  {
+    eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+  }
+  ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO ""
+}
+
+case "$ECHO" in
+  printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+  print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+  *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
 $as_echo_n "checking for a sed that does not truncate output... " >&6; }
-if test "${ac_cv_path_SED+set}" = set; then :
+if ${ac_cv_path_SED+:} false; then :
   $as_echo_n "(cached) " >&6
 else
             ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
@@ -4480,7 +4665,7 @@
     for ac_prog in sed gsed; do
     for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
-      { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+      as_fn_executable_p "$ac_path_SED" || continue
 # Check for GNU ac_path_SED and select it if it is found.
   # Check for GNU $ac_path_SED
 case `"$ac_path_SED" --version 2>&1` in
@@ -4515,7 +4700,7 @@
   done
 IFS=$as_save_IFS
   if test -z "$ac_cv_path_SED"; then
-    as_fn_error "no acceptable sed could be found in \$PATH" "$LINENO" 5
+    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
   fi
 else
   ac_cv_path_SED=$SED
@@ -4542,7 +4727,7 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
 $as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then :
+if ${ac_cv_path_GREP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$GREP"; then
@@ -4556,7 +4741,7 @@
     for ac_prog in grep ggrep; do
     for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
-      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+      as_fn_executable_p "$ac_path_GREP" || continue
 # Check for GNU ac_path_GREP and select it if it is found.
   # Check for GNU $ac_path_GREP
 case `"$ac_path_GREP" --version 2>&1` in
@@ -4591,7 +4776,7 @@
   done
 IFS=$as_save_IFS
   if test -z "$ac_cv_path_GREP"; then
-    as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
   fi
 else
   ac_cv_path_GREP=$GREP
@@ -4605,7 +4790,7 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
 $as_echo_n "checking for egrep... " >&6; }
-if test "${ac_cv_path_EGREP+set}" = set; then :
+if ${ac_cv_path_EGREP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
@@ -4622,7 +4807,7 @@
     for ac_prog in egrep; do
     for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
-      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+      as_fn_executable_p "$ac_path_EGREP" || continue
 # Check for GNU ac_path_EGREP and select it if it is found.
   # Check for GNU $ac_path_EGREP
 case `"$ac_path_EGREP" --version 2>&1` in
@@ -4657,7 +4842,7 @@
   done
 IFS=$as_save_IFS
   if test -z "$ac_cv_path_EGREP"; then
-    as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
   fi
 else
   ac_cv_path_EGREP=$EGREP
@@ -4672,7 +4857,7 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
 $as_echo_n "checking for fgrep... " >&6; }
-if test "${ac_cv_path_FGREP+set}" = set; then :
+if ${ac_cv_path_FGREP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
@@ -4689,7 +4874,7 @@
     for ac_prog in fgrep; do
     for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
-      { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+      as_fn_executable_p "$ac_path_FGREP" || continue
 # Check for GNU ac_path_FGREP and select it if it is found.
   # Check for GNU $ac_path_FGREP
 case `"$ac_path_FGREP" --version 2>&1` in
@@ -4724,7 +4909,7 @@
   done
 IFS=$as_save_IFS
   if test -z "$ac_cv_path_FGREP"; then
-    as_fn_error "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+    as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
   fi
 else
   ac_cv_path_FGREP=$FGREP
@@ -4803,7 +4988,7 @@
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
 $as_echo_n "checking for non-GNU ld... " >&6; }
 fi
-if test "${lt_cv_path_LD+set}" = set; then :
+if ${lt_cv_path_LD+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$LD"; then
@@ -4840,10 +5025,10 @@
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
-test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if test "${lt_cv_prog_gnu_ld+set}" = set; then :
+if ${lt_cv_prog_gnu_ld+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   # I'd rather use --version here, but apparently some GNU lds only accept -v.
@@ -4870,7 +5055,7 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
 $as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
-if test "${lt_cv_path_NM+set}" = set; then :
+if ${lt_cv_path_NM+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
@@ -4923,14 +5108,17 @@
   NM="$lt_cv_path_NM"
 else
   # Didn't find any BSD compatible name lister, look for dumpbin.
-  if test -n "$ac_tool_prefix"; then
-  for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+  if test -n "$DUMPBIN"; then :
+    # Let the user override the test.
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in dumpbin "link -dump"
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_DUMPBIN+set}" = set; then :
+if ${ac_cv_prog_DUMPBIN+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$DUMPBIN"; then
@@ -4942,7 +5130,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -4968,13 +5156,13 @@
 fi
 if test -z "$DUMPBIN"; then
   ac_ct_DUMPBIN=$DUMPBIN
-  for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+  for ac_prog in dumpbin "link -dump"
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then :
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_DUMPBIN"; then
@@ -4986,7 +5174,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -5023,6 +5211,15 @@
   fi
 fi
 
+    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    *COFF*)
+      DUMPBIN="$DUMPBIN -symbols"
+      ;;
+    *)
+      DUMPBIN=:
+      ;;
+    esac
+  fi
 
   if test "$DUMPBIN" != ":"; then
     NM="$DUMPBIN"
@@ -5037,18 +5234,18 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
 $as_echo_n "checking the name lister ($NM) interface... " >&6; }
-if test "${lt_cv_nm_interface+set}" = set; then :
+if ${lt_cv_nm_interface+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_nm_interface="BSD nm"
   echo "int some_variable = 0;" > conftest.$ac_ext
-  (eval echo "\"\$as_me:5045: $ac_compile\"" >&5)
+  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
   (eval "$ac_compile" 2>conftest.err)
   cat conftest.err >&5
-  (eval echo "\"\$as_me:5048: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
   (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
   cat conftest.err >&5
-  (eval echo "\"\$as_me:5051: output\"" >&5)
+  (eval echo "\"\$as_me:$LINENO: output\"" >&5)
   cat conftest.out >&5
   if $GREP 'External.*some_variable' conftest.out > /dev/null; then
     lt_cv_nm_interface="MS dumpbin"
@@ -5072,7 +5269,7 @@
 # find the maximum length of command line arguments
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
 $as_echo_n "checking the maximum length of command line arguments... " >&6; }
-if test "${lt_cv_sys_max_cmd_len+set}" = set; then :
+if ${lt_cv_sys_max_cmd_len+:} false; then :
   $as_echo_n "(cached) " >&6
 else
     i=0
@@ -5105,6 +5302,11 @@
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
+  mint*)
+    # On MiNT this can take a long time and run out of memory.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
   amigaos*)
     # On AmigaOS with pdksh, this test takes hours, literally.
     # So we just punt and use a minimum line length of 8192.
@@ -5130,6 +5332,11 @@
     lt_cv_sys_max_cmd_len=196608
     ;;
 
+  os2*)
+    # The test takes a long time on OS/2.
+    lt_cv_sys_max_cmd_len=8192
+    ;;
+
   osf*)
     # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
     # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
@@ -5156,7 +5363,8 @@
     ;;
   *)
     lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-    if test -n "$lt_cv_sys_max_cmd_len"; then
+    if test -n "$lt_cv_sys_max_cmd_len" && \
+      test undefined != "$lt_cv_sys_max_cmd_len"; then
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
     else
@@ -5169,8 +5377,8 @@
       # If test is not a shell built-in, we'll probably end up computing a
       # maximum length that is only half of the actual maximum length, but
       # we can't tell.
-      while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
-	         = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
 	      test $i != 17 # 1/2 MB should be enough
       do
         i=`expr $i + 1`
@@ -5212,8 +5420,8 @@
 # Try some XSI features
 xsi_shell=no
 ( _lt_dummy="a/b/c"
-  test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
-      = c,a/b,, \
+  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,b/c, \
     && eval 'test $(( 1 + 1 )) -eq 2 \
     && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
   && xsi_shell=yes
@@ -5262,9 +5470,83 @@
 
 
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
 $as_echo_n "checking for $LD option to reload object files... " >&6; }
-if test "${lt_cv_ld_reload_flag+set}" = set; then :
+if ${lt_cv_ld_reload_flag+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_ld_reload_flag='-r'
@@ -5278,6 +5560,11 @@
 esac
 reload_cmds='$LD$reload_flag -o $output$reload_objs'
 case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test "$GCC" != yes; then
+      reload_cmds=false
+    fi
+    ;;
   darwin*)
     if test "$GCC" = yes; then
       reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
@@ -5300,7 +5587,7 @@
 set dummy ${ac_tool_prefix}objdump; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OBJDUMP+set}" = set; then :
+if ${ac_cv_prog_OBJDUMP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$OBJDUMP"; then
@@ -5312,7 +5599,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -5340,7 +5627,7 @@
 set dummy objdump; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then :
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_OBJDUMP"; then
@@ -5352,7 +5639,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_OBJDUMP="objdump"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -5399,7 +5686,7 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
 $as_echo_n "checking how to recognize dependent libraries... " >&6; }
-if test "${lt_cv_deplibs_check_method+set}" = set; then :
+if ${lt_cv_deplibs_check_method+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_file_magic_cmd='$MAGIC_CMD'
@@ -5441,16 +5728,18 @@
   # Base MSYS/MinGW do not provide the 'file' command needed by
   # func_win32_libid shell function, so use a weaker test based on 'objdump',
   # unless we find 'file', for example because we are cross-compiling.
-  if ( file / ) >/dev/null 2>&1; then
+  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
     lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
     lt_cv_file_magic_cmd='func_win32_libid'
   else
-    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
     lt_cv_file_magic_cmd='$OBJDUMP -f'
   fi
   ;;
 
-cegcc)
+cegcc*)
   # use the weaker test based on 'objdump'. See mingw*.
   lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
   lt_cv_file_magic_cmd='$OBJDUMP -f'
@@ -5480,6 +5769,10 @@
   lt_cv_deplibs_check_method=pass_all
   ;;
 
+haiku*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
 hpux10.20* | hpux11*)
   lt_cv_file_magic_cmd=/usr/bin/file
   case $host_cpu in
@@ -5488,11 +5781,11 @@
     lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
     ;;
   hppa*64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
     lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
     ;;
   *)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
     lt_cv_file_magic_test_file=/usr/lib/libc.sl
     ;;
   esac
@@ -5513,8 +5806,8 @@
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
@@ -5595,6 +5888,21 @@
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
 $as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
 file_magic_cmd=$lt_cv_file_magic_cmd
 deplibs_check_method=$lt_cv_deplibs_check_method
 test -z "$deplibs_check_method" && deplibs_check_method=unknown
@@ -5610,12 +5918,166 @@
 
 
 
+
+
+
+
+
+
+
+
+
+
 if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AR+set}" = set; then :
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh
+  # decide which to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in ar
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$AR"; then
@@ -5627,8 +6089,8 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_AR="${ac_tool_prefix}ar"
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
@@ -5648,14 +6110,18 @@
 fi
 
 
+    test -n "$AR" && break
+  done
 fi
-if test -z "$ac_cv_prog_AR"; then
+if test -z "$AR"; then
   ac_ct_AR=$AR
-  # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
+  for ac_prog in ar
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_AR"; then
@@ -5667,8 +6133,8 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_AR="ar"
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_AR="$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
@@ -5687,6 +6153,10 @@
 $as_echo "no" >&6; }
 fi
 
+
+  test -n "$ac_ct_AR" && break
+done
+
   if test "x$ac_ct_AR" = x; then
     AR="false"
   else
@@ -5698,12 +6168,10 @@
 esac
     AR=$ac_ct_AR
   fi
-else
-  AR="$ac_cv_prog_AR"
 fi
 
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
+: ${AR=ar}
+: ${AR_FLAGS=cru}
 
 
 
@@ -5715,12 +6183,70 @@
 
 
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ar_at_file=no
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+      { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      if test "$ac_status" -eq 0; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	if test "$ac_status" -ne 0; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
+
+if test "x$lt_cv_ar_at_file" = xno; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
+
+
+
+
+
+
+
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
 set dummy ${ac_tool_prefix}strip; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then :
+if ${ac_cv_prog_STRIP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$STRIP"; then
@@ -5732,7 +6258,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_STRIP="${ac_tool_prefix}strip"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -5760,7 +6286,7 @@
 set dummy strip; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_STRIP"; then
@@ -5772,7 +6298,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_STRIP="strip"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -5819,7 +6345,7 @@
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_RANLIB+set}" = set; then :
+if ${ac_cv_prog_RANLIB+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$RANLIB"; then
@@ -5831,7 +6357,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -5859,7 +6385,7 @@
 set dummy ranlib; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then :
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_RANLIB"; then
@@ -5871,7 +6397,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_RANLIB="ranlib"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -5921,15 +6447,27 @@
 if test -n "$RANLIB"; then
   case $host_os in
   openbsd*)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
     ;;
   *)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
     ;;
   esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
 fi
 
+case $host_os in
+  darwin*)
+    lock_old_archive_extraction=yes ;;
+  *)
+    lock_old_archive_extraction=no ;;
+esac
+
+
+
+
+
+
 
 
 
@@ -5976,7 +6514,7 @@
 # Check for command to grab the raw symbol name followed by C symbol from nm.
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
 $as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then :
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
   $as_echo_n "(cached) " >&6
 else
 
@@ -6037,8 +6575,8 @@
 lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
 
 # Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
 
 # Handle CRLF in mingw tool chain
 opt_cr=
@@ -6062,6 +6600,7 @@
     # which start with @ or ?.
     lt_cv_sys_global_symbol_pipe="$AWK '"\
 "     {last_section=section; section=\$ 3};"\
+"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
 "     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
 "     \$ 0!~/External *\|/{next};"\
 "     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
@@ -6074,6 +6613,7 @@
   else
     lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
   fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
 
   # Check to see that the pipe works correctly.
   pipe_works=no
@@ -6099,8 +6639,8 @@
   test $ac_status = 0; }; then
     # Now try to grab the symbols.
     nlist=conftest.nm
-    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5
-  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+  (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; } && test -s "$nlist"; then
@@ -6115,6 +6655,18 @@
       if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
 	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
 	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
 #ifdef __cplusplus
 extern "C" {
 #endif
@@ -6126,7 +6678,7 @@
 	  cat <<_LT_EOF >> conftest.$ac_ext
 
 /* The mapping between symbol names and symbols.  */
-const struct {
+LT_DLSYM_CONST struct {
   const char *name;
   void       *address;
 }
@@ -6152,8 +6704,8 @@
 _LT_EOF
 	  # Now try linking the two files.
 	  mv conftest.$ac_objext conftstm.$ac_objext
-	  lt_save_LIBS="$LIBS"
-	  lt_save_CFLAGS="$CFLAGS"
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
 	  LIBS="conftstm.$ac_objext"
 	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
 	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
@@ -6163,8 +6715,8 @@
   test $ac_status = 0; } && test -s conftest${ac_exeext}; then
 	    pipe_works=yes
 	  fi
-	  LIBS="$lt_save_LIBS"
-	  CFLAGS="$lt_save_CFLAGS"
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
 	else
 	  echo "cannot find nm_test_func in $nlist" >&5
 	fi
@@ -6201,6 +6753,12 @@
 $as_echo "ok" >&6; }
 fi
 
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
 
 
 
@@ -6223,6 +6781,48 @@
 
 
 
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+  withval=$with_sysroot;
+else
+  with_sysroot=no
+fi
+
+
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+   if test "$GCC" = yes; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
+$as_echo "${with_sysroot}" >&6; }
+   as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+   ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
+
+
+
 # Check whether --enable-libtool-lock was given.
 if test "${enable_libtool_lock+set}" = set; then :
   enableval=$enable_libtool_lock;
@@ -6254,7 +6854,7 @@
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 6257 "configure"' > conftest.$ac_ext
+  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -6305,7 +6905,14 @@
 	    LD="${LD-ld} -m elf_i386_fbsd"
 	    ;;
 	  x86_64-*linux*)
-	    LD="${LD-ld} -m elf_i386"
+	    case `/usr/bin/file conftest.o` in
+	      *x86-64*)
+	         LD="${LD-ld} -m elf32_x86_64"
+	         ;;
+	      *)
+	         LD="${LD-ld} -m elf_i386"
+	         ;;
+	    esac
 	    ;;
 	  ppc64-*linux*|powerpc64-*linux*)
 	    LD="${LD-ld} -m elf32ppclinux"
@@ -6348,7 +6955,7 @@
   CFLAGS="$CFLAGS -belf"
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
 $as_echo_n "checking whether the C compiler needs -belf... " >&6; }
-if test "${lt_cv_cc_needs_belf+set}" = set; then :
+if ${lt_cv_cc_needs_belf+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_ext=c
@@ -6389,7 +6996,7 @@
     CFLAGS="$SAVE_CFLAGS"
   fi
   ;;
-sparc*-*solaris*)
+*-*solaris*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
@@ -6400,7 +7007,20 @@
     case `/usr/bin/file conftest.o` in
     *64-bit*)
       case $lt_cv_prog_gnu_ld in
-      yes*) LD="${LD-ld} -m elf64_sparc" ;;
+      yes*)
+        case $host in
+        i?86-*-solaris*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        sparc*-*-solaris*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+        esac
+        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
+        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+          LD="${LD-ld}_sol2"
+        fi
+        ;;
       *)
 	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
 	  LD="${LD-ld} -64"
@@ -6416,6 +7036,123 @@
 
 need_locks="$enable_libtool_lock"
 
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$MANIFEST_TOOL"; then
+  ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+  ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+  # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_MANIFEST_TOOL"; then
+  ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_MANIFEST_TOOL" = x; then
+    MANIFEST_TOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+  fi
+else
+  MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&5
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+  MANIFEST_TOOL=:
+fi
+
+
+
+
+
 
   case $host_os in
     rhapsody* | darwin*)
@@ -6424,7 +7161,7 @@
 set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_DSYMUTIL+set}" = set; then :
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$DSYMUTIL"; then
@@ -6436,7 +7173,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6464,7 +7201,7 @@
 set dummy dsymutil; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then :
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_DSYMUTIL"; then
@@ -6476,7 +7213,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6516,7 +7253,7 @@
 set dummy ${ac_tool_prefix}nmedit; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_NMEDIT+set}" = set; then :
+if ${ac_cv_prog_NMEDIT+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NMEDIT"; then
@@ -6528,7 +7265,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6556,7 +7293,7 @@
 set dummy nmedit; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then :
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_NMEDIT"; then
@@ -6568,7 +7305,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_NMEDIT="nmedit"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6608,7 +7345,7 @@
 set dummy ${ac_tool_prefix}lipo; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_LIPO+set}" = set; then :
+if ${ac_cv_prog_LIPO+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$LIPO"; then
@@ -6620,7 +7357,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6648,7 +7385,7 @@
 set dummy lipo; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then :
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_LIPO"; then
@@ -6660,7 +7397,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_LIPO="lipo"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6700,7 +7437,7 @@
 set dummy ${ac_tool_prefix}otool; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OTOOL+set}" = set; then :
+if ${ac_cv_prog_OTOOL+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$OTOOL"; then
@@ -6712,7 +7449,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6740,7 +7477,7 @@
 set dummy otool; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then :
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_OTOOL"; then
@@ -6752,7 +7489,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_OTOOL="otool"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6792,7 +7529,7 @@
 set dummy ${ac_tool_prefix}otool64; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OTOOL64+set}" = set; then :
+if ${ac_cv_prog_OTOOL64+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$OTOOL64"; then
@@ -6804,7 +7541,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6832,7 +7569,7 @@
 set dummy otool64; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then :
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_OTOOL64"; then
@@ -6844,7 +7581,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_OTOOL64="otool64"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6907,7 +7644,7 @@
 
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
 $as_echo_n "checking for -single_module linker flag... " >&6; }
-if test "${lt_cv_apple_cc_single_mod+set}" = set; then :
+if ${lt_cv_apple_cc_single_mod+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_apple_cc_single_mod=no
@@ -6923,7 +7660,13 @@
 	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
 	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
         _lt_result=$?
-	if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+	# If there is a non-empty error log, and "single_module"
+	# appears in it, assume the flag caused a linker warning
+        if test -s conftest.err && $GREP single_module conftest.err; then
+	  cat conftest.err >&5
+	# Otherwise, if the output was created with a 0 exit code from
+	# the compiler, it worked.
+	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
 	  lt_cv_apple_cc_single_mod=yes
 	else
 	  cat conftest.err >&5
@@ -6934,9 +7677,10 @@
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
 $as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
 $as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
-if test "${lt_cv_ld_exported_symbols_list+set}" = set; then :
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_ld_exported_symbols_list=no
@@ -6966,6 +7710,41 @@
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
 $as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_force_load=no
+      cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+      echo "$AR cru libconftest.a conftest.o" >&5
+      $AR cru libconftest.a conftest.o 2>&5
+      echo "$RANLIB libconftest.a" >&5
+      $RANLIB libconftest.a 2>&5
+      cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+      _lt_result=$?
+      if test -s conftest.err && $GREP force_load conftest.err; then
+	cat conftest.err >&5
+      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+	lt_cv_ld_force_load=yes
+      else
+	cat conftest.err >&5
+      fi
+        rm -f conftest.err libconftest.a conftest conftest.c
+        rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
     case $host_os in
     rhapsody* | darwin1.[012])
       _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
@@ -6993,7 +7772,7 @@
     else
       _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
     fi
-    if test "$DSYMUTIL" != ":"; then
+    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
       _lt_dsymutil='~$DSYMUTIL $lib || :'
     else
       _lt_dsymutil=
@@ -7013,7 +7792,7 @@
   CPP=
 fi
 if test -z "$CPP"; then
-  if test "${ac_cv_prog_CPP+set}" = set; then :
+  if ${ac_cv_prog_CPP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
       # Double quotes because CPP needs to be expanded
@@ -7043,7 +7822,7 @@
   # Broken: fails on valid input.
 continue
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
   # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
@@ -7059,11 +7838,11 @@
 ac_preproc_ok=:
 break
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
 done
 # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.i conftest.err conftest.$ac_ext
 if $ac_preproc_ok; then :
   break
 fi
@@ -7102,7 +7881,7 @@
   # Broken: fails on valid input.
 continue
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
   # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
@@ -7118,18 +7897,18 @@
 ac_preproc_ok=:
 break
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
 done
 # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.i conftest.err conftest.$ac_ext
 if $ac_preproc_ok; then :
 
 else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
 fi
 
 ac_ext=c
@@ -7141,7 +7920,7 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
 $as_echo_n "checking for ANSI C header files... " >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then :
+if ${ac_cv_header_stdc+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -7258,8 +8037,7 @@
   as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
 ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
 "
-eval as_val=\$$as_ac_Header
-   if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
   cat >>confdefs.h <<_ACEOF
 #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
 _ACEOF
@@ -7273,7 +8051,7 @@
 do :
   ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
 "
-if test "x$ac_cv_header_dlfcn_h" = x""yes; then :
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
   cat >>confdefs.h <<_ACEOF
 #define HAVE_DLFCN_H 1
 _ACEOF
@@ -7284,6 +8062,8 @@
 
 
 
+
+
 # Set options
 
 
@@ -7359,7 +8139,22 @@
 
 # Check whether --with-pic was given.
 if test "${with_pic+set}" = set; then :
-  withval=$with_pic; pic_mode="$withval"
+  withval=$with_pic; lt_p=${PACKAGE-default}
+    case $withval in
+    yes|no) pic_mode=$withval ;;
+    *)
+      pic_mode=default
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for lt_pkg in $withval; do
+	IFS="$lt_save_ifs"
+	if test "X$lt_pkg" = "X$lt_p"; then
+	  pic_mode=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
 else
   pic_mode=default
 fi
@@ -7436,6 +8231,11 @@
 
 
 
+
+
+
+
+
 test -z "$LN_S" && LN_S="ln -s"
 
 
@@ -7457,7 +8257,7 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
 $as_echo_n "checking for objdir... " >&6; }
-if test "${lt_cv_objdir+set}" = set; then :
+if ${lt_cv_objdir+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   rm -f .libs 2>/dev/null
@@ -7485,19 +8285,6 @@
 
 
 
-
-
-
-
-
-
-
-
-
-
-
-
-
 case $host_os in
 aix3*)
   # AIX sometimes has problems with the GCC collect2 program.  For some
@@ -7510,23 +8297,6 @@
   ;;
 esac
 
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
 # Global variables:
 ofile=libtool
 can_build_shared=yes
@@ -7555,7 +8325,7 @@
     *) break;;
   esac
 done
-cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
 
 
 # Only perform the check for file, if the check method requires it
@@ -7565,7 +8335,7 @@
   if test "$file_magic_cmd" = '$MAGIC_CMD'; then
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
 $as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   case $MAGIC_CMD in
@@ -7631,7 +8401,7 @@
   if test -n "$ac_tool_prefix"; then
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
 $as_echo_n "checking for file... " >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   case $MAGIC_CMD in
@@ -7764,11 +8534,16 @@
 lt_prog_compiler_no_builtin_flag=
 
 if test "$GCC" = yes; then
-  lt_prog_compiler_no_builtin_flag=' -fno-builtin'
+  case $cc_basename in
+  nvcc*)
+    lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+  *)
+    lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+  esac
 
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
 $as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then :
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_rtti_exceptions=no
@@ -7784,15 +8559,15 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7787: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:7791: \$? = $ac_status" >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_rtti_exceptions=yes
@@ -7821,8 +8596,6 @@
 lt_prog_compiler_pic=
 lt_prog_compiler_static=
 
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
 
   if test "$GCC" = yes; then
     lt_prog_compiler_wl='-Wl,'
@@ -7870,6 +8643,12 @@
       lt_prog_compiler_pic='-fno-common'
       ;;
 
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static=
+      ;;
+
     hpux*)
       # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
       # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
@@ -7912,6 +8691,15 @@
       lt_prog_compiler_pic='-fPIC'
       ;;
     esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      lt_prog_compiler_wl='-Xlinker '
+      if test -n "$lt_prog_compiler_pic"; then
+        lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
+      fi
+      ;;
+    esac
   else
     # PORTME Check for flag to pass linker flags through the system compiler.
     case $host_os in
@@ -7953,7 +8741,7 @@
       lt_prog_compiler_static='-non_shared'
       ;;
 
-    linux* | k*bsd*-gnu)
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
       case $cc_basename in
       # old Intel for x86_64 which still supported -KPIC.
       ecc*)
@@ -7974,7 +8762,13 @@
 	lt_prog_compiler_pic='--shared'
 	lt_prog_compiler_static='--static'
 	;;
-      pgcc* | pgf77* | pgf90* | pgf95*)
+      nagfor*)
+	# NAG Fortran compiler
+	lt_prog_compiler_wl='-Wl,-Wl,,'
+	lt_prog_compiler_pic='-PIC'
+	lt_prog_compiler_static='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
         # Portland Group compilers (*not* the Pentium gcc compiler,
 	# which looks to be a dead project)
 	lt_prog_compiler_wl='-Wl,'
@@ -7986,25 +8780,40 @@
         # All Alpha code is PIC.
         lt_prog_compiler_static='-non_shared'
         ;;
-      xl*)
-	# IBM XL C 8.0/Fortran 10.1 on PPC
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
 	lt_prog_compiler_wl='-Wl,'
 	lt_prog_compiler_pic='-qpic'
 	lt_prog_compiler_static='-qstaticlink'
 	;;
       *)
 	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Qoption ld '
+	  ;;
 	*Sun\ C*)
 	  # Sun C 5.9
 	  lt_prog_compiler_pic='-KPIC'
 	  lt_prog_compiler_static='-Bstatic'
 	  lt_prog_compiler_wl='-Wl,'
 	  ;;
-	*Sun\ F*)
-	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-	  lt_prog_compiler_pic='-KPIC'
+        *Intel*\ [CF]*Compiler*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fPIC'
+	  lt_prog_compiler_static='-static'
+	  ;;
+	*Portland\ Group*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fpic'
 	  lt_prog_compiler_static='-Bstatic'
-	  lt_prog_compiler_wl=''
 	  ;;
 	esac
 	;;
@@ -8036,7 +8845,7 @@
       lt_prog_compiler_pic='-KPIC'
       lt_prog_compiler_static='-Bstatic'
       case $cc_basename in
-      f77* | f90* | f95*)
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
 	lt_prog_compiler_wl='-Qoption ld ';;
       *)
 	lt_prog_compiler_wl='-Wl,';;
@@ -8093,13 +8902,17 @@
     lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
     ;;
 esac
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
-$as_echo "$lt_prog_compiler_pic" >&6; }
 
-
-
-
-
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
 
 #
 # Check to make sure the PIC flag actually works.
@@ -8107,7 +8920,7 @@
 if test -n "$lt_prog_compiler_pic"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
-if test "${lt_cv_prog_compiler_pic_works+set}" = set; then :
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_pic_works=no
@@ -8123,15 +8936,15 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8126: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:8130: \$? = $ac_status" >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_pic_works=yes
@@ -8160,13 +8973,18 @@
 
 
 
+
+
+
+
+
 #
 # Check to make sure the static flag actually works.
 #
 wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if test "${lt_cv_prog_compiler_static_works+set}" = set; then :
+if ${lt_cv_prog_compiler_static_works+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_static_works=no
@@ -8179,7 +8997,7 @@
      if test -s conftest.err; then
        # Append any errors to the config.log.
        cat conftest.err 1>&5
-       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
        $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
        if diff conftest.exp conftest.er2 >/dev/null; then
          lt_cv_prog_compiler_static_works=yes
@@ -8209,7 +9027,7 @@
 
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
+if ${lt_cv_prog_compiler_c_o+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_c_o=no
@@ -8228,16 +9046,16 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8231: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:8235: \$? = $ac_status" >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_c_o=yes
@@ -8264,7 +9082,7 @@
 
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
+if ${lt_cv_prog_compiler_c_o+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_c_o=no
@@ -8283,16 +9101,16 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8286: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:8290: \$? = $ac_status" >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_c_o=yes
@@ -8358,7 +9176,6 @@
   hardcode_direct=no
   hardcode_direct_absolute=no
   hardcode_libdir_flag_spec=
-  hardcode_libdir_flag_spec_ld=
   hardcode_libdir_separator=
   hardcode_minus_L=no
   hardcode_shlibpath_var=unsupported
@@ -8405,7 +9222,33 @@
   esac
 
   ld_shlibs=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
   if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
     # If archive_cmds runs LD, not CC, wlarc should be empty
     wlarc='${wl}'
 
@@ -8423,6 +9266,7 @@
     fi
     supports_anon_versioning=no
     case `$LD -v 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
       *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
       *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
       *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
@@ -8438,11 +9282,12 @@
 	ld_shlibs=no
 	cat <<_LT_EOF 1>&2
 
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** Warning: the GNU linker, at least up to release 2.19, is reported
 *** to be unable to reliably create shared libraries on AIX.
 *** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
 
 _LT_EOF
       fi
@@ -8478,10 +9323,12 @@
       # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
       # as there is no search path for DLLs.
       hardcode_libdir_flag_spec='-L$libdir'
+      export_dynamic_flag_spec='${wl}--export-all-symbols'
       allow_undefined_flag=unsupported
       always_export_symbols=no
       enable_shared_with_static_runtimes=yes
-      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
 
       if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
         archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
@@ -8499,6 +9346,11 @@
       fi
       ;;
 
+    haiku*)
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      link_all_deplibs=yes
+      ;;
+
     interix[3-9]*)
       hardcode_direct=no
       hardcode_shlibpath_var=no
@@ -8514,7 +9366,7 @@
       archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
-    gnu* | linux* | tpf* | k*bsd*-gnu)
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
       tmp_diet=no
       if test "$host_os" = linux-dietlibc; then
 	case $cc_basename in
@@ -8524,15 +9376,16 @@
       if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
 	 && test "$tmp_diet" = no
       then
-	tmp_addflag=
+	tmp_addflag=' $pic_flag'
 	tmp_sharedflag='-shared'
 	case $cc_basename,$host_cpu in
         pgcc*)				# Portland Group C compiler
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag'
 	  ;;
-	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag -Mnomain' ;;
 	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
 	  tmp_addflag=' -i_dynamic' ;;
@@ -8543,13 +9396,17 @@
 	lf95*)				# Lahey Fortran 8.1
 	  whole_archive_flag_spec=
 	  tmp_sharedflag='--shared' ;;
-	xl[cC]*)			# IBM XL C 8.0 on PPC (deal with xlf below)
+	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
 	  tmp_sharedflag='-qmkshrobj'
 	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  ;;
 	esac
 	case `$CC -V 2>&1 | sed 5q` in
 	*Sun\ C*)			# Sun C 5.9
-	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
 	  compiler_needs_object=yes
 	  tmp_sharedflag='-G' ;;
 	*Sun\ F*)			# Sun Fortran 8.3
@@ -8565,17 +9422,16 @@
         fi
 
 	case $cc_basename in
-	xlf*)
+	xlf* | bgf* | bgxlf* | mpixlf*)
 	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
 	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
-	  hardcode_libdir_flag_spec=
-	  hardcode_libdir_flag_spec_ld='-rpath $libdir'
-	  archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+	  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
 	  if test "x$supports_anon_versioning" = xyes; then
 	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
 	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
 	      echo "local: *; };" >> $output_objdir/$libname.ver~
-	      $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
 	  fi
 	  ;;
 	esac
@@ -8589,8 +9445,8 @@
 	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
       else
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       fi
       ;;
 
@@ -8608,8 +9464,8 @@
 
 _LT_EOF
       elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       else
 	ld_shlibs=no
       fi
@@ -8655,8 +9511,8 @@
 
     *)
       if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       else
 	ld_shlibs=no
       fi
@@ -8696,8 +9552,10 @@
       else
 	# If we're using GNU nm, then we don't want the "-C" option.
 	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
 	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	else
 	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	fi
@@ -8784,7 +9642,13 @@
 	allow_undefined_flag='-berok'
         # Determine the default libpath from the value encoded in an
         # empty executable.
-        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+        if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -8797,25 +9661,32 @@
 _ACEOF
 if ac_fn_c_try_link "$LINENO"; then :
 
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
 
         hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
       else
 	if test "$host_cpu" = ia64; then
 	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
@@ -8824,7 +9695,13 @@
 	else
 	 # Determine the default libpath from the value encoded in an
 	 # empty executable.
-	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+	 if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -8837,30 +9714,42 @@
 _ACEOF
 if ac_fn_c_try_link "$LINENO"; then :
 
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
 
 	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
 	  # Warning - without using the other run time loading flags,
 	  # -berok will link without error, but may produce a broken library.
 	  no_undefined_flag=' ${wl}-bernotok'
 	  allow_undefined_flag=' ${wl}-berok'
-	  # Exported symbols can be pulled into shared objects from archives
-	  whole_archive_flag_spec='$convenience'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    whole_archive_flag_spec='$convenience'
+	  fi
 	  archive_cmds_need_lc=yes
 	  # This is similar to how AIX traditionally builds its shared libraries.
 	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
@@ -8892,20 +9781,64 @@
       # Microsoft Visual C++.
       # hardcode_libdir_flag_spec is actually meaningless, as there is
       # no search path for DLLs.
-      hardcode_libdir_flag_spec=' '
-      allow_undefined_flag=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
-      # FIXME: Setting linknames here is a bad hack.
-      archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      old_archive_from_new_cmds='true'
-      # FIXME: Should let the user specify the lib program.
-      old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path='`cygpath -w "$srcfile"`'
-      enable_shared_with_static_runtimes=yes
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	always_export_symbols=yes
+	file_list_spec='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+	enable_shared_with_static_runtimes=yes
+	exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	old_postinstall_cmds='chmod 644 $oldlib'
+	postlink_cmds='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	old_archive_from_new_cmds='true'
+	# FIXME: Should let the user specify the lib program.
+	old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	enable_shared_with_static_runtimes=yes
+	;;
+      esac
       ;;
 
     darwin* | rhapsody*)
@@ -8915,7 +9848,12 @@
   hardcode_direct=no
   hardcode_automatic=yes
   hardcode_shlibpath_var=unsupported
-  whole_archive_flag_spec=''
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+  else
+    whole_archive_flag_spec=''
+  fi
   link_all_deplibs=yes
   allow_undefined_flag="$_lt_dar_allow_undefined"
   case $cc_basename in
@@ -8923,7 +9861,7 @@
      *) _lt_dar_can_shared=$GCC ;;
   esac
   if test "$_lt_dar_can_shared" = "yes"; then
-    output_verbose_link_cmd=echo
+    output_verbose_link_cmd=func_echo_all
     archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
     module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
     archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
@@ -8941,10 +9879,6 @@
       hardcode_shlibpath_var=no
       ;;
 
-    freebsd1*)
-      ld_shlibs=no
-      ;;
-
     # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
     # support.  Future versions do this automatically, but an explicit c++rt0.o
     # does not break anything, and helps significantly (at the cost of a little
@@ -8957,7 +9891,7 @@
       ;;
 
     # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
+    freebsd2.*)
       archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
       hardcode_direct=yes
       hardcode_minus_L=yes
@@ -8966,7 +9900,7 @@
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
     freebsd* | dragonfly*)
-      archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
       hardcode_libdir_flag_spec='-R$libdir'
       hardcode_direct=yes
       hardcode_shlibpath_var=no
@@ -8974,7 +9908,7 @@
 
     hpux9*)
       if test "$GCC" = yes; then
-	archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       else
 	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       fi
@@ -8989,14 +9923,13 @@
       ;;
 
     hpux10*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
       else
 	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
       fi
       if test "$with_gnu_ld" = no; then
 	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-	hardcode_libdir_flag_spec_ld='+b $libdir'
 	hardcode_libdir_separator=:
 	hardcode_direct=yes
 	hardcode_direct_absolute=yes
@@ -9008,16 +9941,16 @@
       ;;
 
     hpux11*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
 	case $host_cpu in
 	hppa*64*)
 	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       else
@@ -9029,7 +9962,46 @@
 	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+
+	  # Older versions of the 11.00 compiler do not understand -b yet
+	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler__b=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS -b"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler__b=yes
+       fi
+     else
+       lt_cv_prog_compiler__b=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test x"$lt_cv_prog_compiler__b" = xyes; then
+    archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+    archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
 	  ;;
 	esac
       fi
@@ -9057,26 +10029,39 @@
 
     irix5* | irix6* | nonstopux*)
       if test "$GCC" = yes; then
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	# Try to use the -exported_symbol ld option, if it does not
 	# work, assume that -exports_file does not work either and
 	# implicitly export all symbols.
-        save_LDFLAGS="$LDFLAGS"
-        LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+	# This should be the same for all languages, so no per-tag cache variable.
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
-int foo(void) {}
+int foo (void) { return 0; }
 _ACEOF
 if ac_fn_c_try_link "$LINENO"; then :
-  archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
-
+  lt_cv_irix_exported_symbol=yes
+else
+  lt_cv_irix_exported_symbol=no
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
-        LDFLAGS="$save_LDFLAGS"
+           LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
       else
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
       fi
       archive_cmds_need_lc='no'
       hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
@@ -9138,17 +10123,17 @@
       hardcode_libdir_flag_spec='-L$libdir'
       hardcode_minus_L=yes
       allow_undefined_flag=unsupported
-      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
       old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
       ;;
 
     osf3*)
       if test "$GCC" = yes; then
 	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
       else
 	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
       fi
       archive_cmds_need_lc='no'
       hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
@@ -9158,13 +10143,13 @@
     osf4* | osf5*)	# as osf3* with the addition of -msym flag
       if test "$GCC" = yes; then
 	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
       else
 	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
 	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
-	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
 	hardcode_libdir_flag_spec='-rpath $libdir'
@@ -9177,9 +10162,9 @@
       no_undefined_flag=' -z defs'
       if test "$GCC" = yes; then
 	wlarc='${wl}'
-	archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
       else
 	case `$CC -V 2>&1` in
 	*"Compilers 5.0"*)
@@ -9367,44 +10352,50 @@
       # to ld, don't add -lc before -lgcc.
       { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
-      $RM conftest*
-      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-      if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; } 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$lt_prog_compiler_wl
-	pic_flag=$lt_prog_compiler_pic
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$allow_undefined_flag
-        allow_undefined_flag=
-        if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl
+	  pic_flag=$lt_prog_compiler_pic
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag
+	  allow_undefined_flag=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
   (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }
-        then
-	  archive_cmds_need_lc=no
-        else
-	  archive_cmds_need_lc=yes
-        fi
-        allow_undefined_flag=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $RM conftest*
-      { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5
-$as_echo "$archive_cmds_need_lc" >&6; }
+	  then
+	    lt_cv_archive_cmds_need_lc=no
+	  else
+	    lt_cv_archive_cmds_need_lc=yes
+	  fi
+	  allow_undefined_flag=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+      archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
       ;;
     esac
   fi
@@ -9562,11 +10553,6 @@
 
 
 
-
-
-
-
-
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
 $as_echo_n "checking dynamic linker characteristics... " >&6; }
 
@@ -9575,16 +10561,23 @@
     darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
     *) lt_awk_arg="/^libraries:/" ;;
   esac
-  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+  case $host_os in
+    mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
+    *) lt_sed_strip_eq="s,=/,/,g" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+  case $lt_search_path_spec in
+  *\;*)
     # if the path contains ";" then we assume it to be the separator
     # otherwise default to the standard path separator (i.e. ":") - it is
     # assumed that no part of a normal pathname contains ";" but that should
     # okay in the real world where ";" in dirpaths is itself problematic.
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
-  else
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-  fi
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+    ;;
+  *)
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+    ;;
+  esac
   # Ok, now we have the path, separated by spaces, we can step through it
   # and add multilib dir if necessary.
   lt_tmp_lt_search_path_spec=
@@ -9597,7 +10590,7 @@
 	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
     fi
   done
-  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
 BEGIN {RS=" "; FS="/|\n";} {
   lt_foo="";
   lt_count=0;
@@ -9617,7 +10610,13 @@
   if (lt_foo != "") { lt_freq[lt_foo]++; }
   if (lt_freq[lt_foo] == 1) { print lt_foo; }
 }'`
-  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+  # AWK program above erroneously prepends '/' to C:/dos/paths
+  # for these hosts.
+  case $host_os in
+    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+      $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+  esac
+  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
 else
   sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
 fi
@@ -9643,7 +10642,7 @@
 
 case $host_os in
 aix3*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
   shlibpath_var=LIBPATH
 
@@ -9652,7 +10651,7 @@
   ;;
 
 aix[4-9]*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   hardcode_into_libs=yes
@@ -9705,7 +10704,7 @@
   m68k)
     library_names_spec='$libname.ixlibrary $libname.a'
     # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
     ;;
   esac
   ;;
@@ -9717,7 +10716,7 @@
   ;;
 
 bsdi[45]*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
@@ -9736,8 +10735,9 @@
   need_version=no
   need_lib_prefix=no
 
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
     library_names_spec='$libname.dll.a'
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
     postinstall_cmds='base_file=`basename \${file}`~
@@ -9758,36 +10758,83 @@
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
       soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+
+      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
       ;;
     mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
       soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
       library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
       ;;
     esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
     ;;
 
   *)
+    # Assume MSVC wrapper
     library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
     ;;
   esac
-  dynamic_linker='Win32 ld.exe'
   # FIXME: first we should search . and the directory the executable is in
   shlibpath_var=PATH
   ;;
@@ -9808,7 +10855,7 @@
   ;;
 
 dgux*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
@@ -9816,10 +10863,6 @@
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
 freebsd* | dragonfly*)
   # DragonFly does not have aout.  When/if they implement a new
   # versioning mechanism, adjust this.
@@ -9827,7 +10870,7 @@
     objformat=`/usr/bin/objformat`
   else
     case $host_os in
-    freebsd[123]*) objformat=aout ;;
+    freebsd[23].*) objformat=aout ;;
     *) objformat=elf ;;
     esac
   fi
@@ -9845,7 +10888,7 @@
   esac
   shlibpath_var=LD_LIBRARY_PATH
   case $host_os in
-  freebsd2*)
+  freebsd2.*)
     shlibpath_overrides_runpath=yes
     ;;
   freebsd3.[01]* | freebsdelf3.[01]*)
@@ -9865,12 +10908,26 @@
   ;;
 
 gnu*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
   hardcode_into_libs=yes
   ;;
 
@@ -9916,12 +10973,14 @@
     soname_spec='${libname}${release}${shared_ext}$major'
     ;;
   esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
   postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
   ;;
 
 interix[3-9]*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
@@ -9937,7 +10996,7 @@
     nonstopux*) version_type=nonstopux ;;
     *)
 	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux
+		version_type=linux # correct to gnu/linux during the next big refactor
 	else
 		version_type=irix
 	fi ;;
@@ -9974,9 +11033,9 @@
   dynamic_linker=no
   ;;
 
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
-  version_type=linux
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -9984,12 +11043,17 @@
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
+
   # Some binutils ld are patched to set DT_RUNPATH
-  save_LDFLAGS=$LDFLAGS
-  save_libdir=$libdir
-  eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
-       LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -10002,13 +11066,17 @@
 _ACEOF
 if ac_fn_c_try_link "$LINENO"; then :
   if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
-  shlibpath_overrides_runpath=yes
+  lt_cv_shlibpath_overrides_runpath=yes
 fi
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
-  LDFLAGS=$save_LDFLAGS
-  libdir=$save_libdir
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
 
   # This implies no fast_install, which is unacceptable.
   # Some rework will be needed to allow for fast_install
@@ -10020,8 +11088,9 @@
 
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
     sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
+
   fi
 
   # We used to test for /lib/ld.so.1 and disable shared libraries on
@@ -10052,7 +11121,7 @@
   ;;
 
 newsos6)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
@@ -10121,7 +11190,7 @@
   ;;
 
 solaris*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -10146,7 +11215,7 @@
   ;;
 
 sysv4 | sysv4.3*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
@@ -10170,7 +11239,7 @@
 
 sysv4*MP*)
   if test -d /usr/nec ;then
-    version_type=linux
+    version_type=linux # correct to gnu/linux during the next big refactor
     library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
     soname_spec='$libname${shared_ext}.$major'
     shlibpath_var=LD_LIBRARY_PATH
@@ -10201,7 +11270,7 @@
 
 tpf*)
   # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -10211,7 +11280,7 @@
   ;;
 
 uts4*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
@@ -10323,6 +11392,11 @@
 
 
 
+
+
+
+
+
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
 $as_echo_n "checking how to hardcode library paths into programs... " >&6; }
 hardcode_action=
@@ -10395,7 +11469,7 @@
   # if libdl is installed we need to link against it
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
 $as_echo_n "checking for dlopen in -ldl... " >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
+if ${ac_cv_lib_dl_dlopen+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
@@ -10429,7 +11503,7 @@
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
 $as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
 else
 
@@ -10443,12 +11517,12 @@
 
   *)
     ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
-if test "x$ac_cv_func_shl_load" = x""yes; then :
+if test "x$ac_cv_func_shl_load" = xyes; then :
   lt_cv_dlopen="shl_load"
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
 $as_echo_n "checking for shl_load in -ldld... " >&6; }
-if test "${ac_cv_lib_dld_shl_load+set}" = set; then :
+if ${ac_cv_lib_dld_shl_load+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
@@ -10482,16 +11556,16 @@
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
 $as_echo "$ac_cv_lib_dld_shl_load" >&6; }
-if test "x$ac_cv_lib_dld_shl_load" = x""yes; then :
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
   lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
 else
   ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
-if test "x$ac_cv_func_dlopen" = x""yes; then :
+if test "x$ac_cv_func_dlopen" = xyes; then :
   lt_cv_dlopen="dlopen"
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
 $as_echo_n "checking for dlopen in -ldl... " >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
+if ${ac_cv_lib_dl_dlopen+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
@@ -10525,12 +11599,12 @@
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
 $as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
 $as_echo_n "checking for dlopen in -lsvld... " >&6; }
-if test "${ac_cv_lib_svld_dlopen+set}" = set; then :
+if ${ac_cv_lib_svld_dlopen+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
@@ -10564,12 +11638,12 @@
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
 $as_echo "$ac_cv_lib_svld_dlopen" >&6; }
-if test "x$ac_cv_lib_svld_dlopen" = x""yes; then :
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
 $as_echo_n "checking for dld_link in -ldld... " >&6; }
-if test "${ac_cv_lib_dld_dld_link+set}" = set; then :
+if ${ac_cv_lib_dld_dld_link+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
@@ -10603,7 +11677,7 @@
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
 $as_echo "$ac_cv_lib_dld_dld_link" >&6; }
-if test "x$ac_cv_lib_dld_dld_link" = x""yes; then :
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
   lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
 fi
 
@@ -10644,7 +11718,7 @@
 
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
 $as_echo_n "checking whether a program can dlopen itself... " >&6; }
-if test "${lt_cv_dlopen_self+set}" = set; then :
+if ${lt_cv_dlopen_self+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   	  if test "$cross_compiling" = yes; then :
@@ -10653,7 +11727,7 @@
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 10656 "configure"
+#line $LINENO "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -10694,7 +11768,13 @@
 #  endif
 #endif
 
-void fnord() { int i=42;}
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
 int main ()
 {
   void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
@@ -10703,7 +11783,11 @@
   if (self)
     {
       if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
       /* dlclose (self); */
     }
   else
@@ -10740,7 +11824,7 @@
       wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
       { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
 $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
-if test "${lt_cv_dlopen_self_static+set}" = set; then :
+if ${lt_cv_dlopen_self_static+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   	  if test "$cross_compiling" = yes; then :
@@ -10749,7 +11833,7 @@
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 10752 "configure"
+#line $LINENO "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -10790,7 +11874,13 @@
 #  endif
 #endif
 
-void fnord() { int i=42;}
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
 int main ()
 {
   void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
@@ -10799,7 +11889,11 @@
   if (self)
     {
       if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
       /* dlclose (self); */
     }
   else
@@ -10968,6 +12062,8 @@
 
 
 
+
+
         ac_config_commands="$ac_config_commands libtool"
 
 
@@ -10978,6 +12074,1021 @@
 
 
 
+# Test for 64-bit build.
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of size_t" >&5
+$as_echo_n "checking size of size_t... " >&6; }
+if ${ac_cv_sizeof_size_t+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (size_t))" "ac_cv_sizeof_size_t"        "$ac_includes_default"; then :
+
+else
+  if test "$ac_cv_type_size_t" = yes; then
+     { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (size_t)
+See \`config.log' for more details" "$LINENO" 5; }
+   else
+     ac_cv_sizeof_size_t=0
+   fi
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_size_t" >&5
+$as_echo "$ac_cv_sizeof_size_t" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_SIZE_T $ac_cv_sizeof_size_t
+_ACEOF
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler vendor" >&5
+$as_echo_n "checking for C compiler vendor... " >&6; }
+if ${ax_cv_c_compiler_vendor+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # note: don't check for gcc first since some other compilers define __GNUC__
+  vendors="intel:     __ICC,__ECC,__INTEL_COMPILER
+           ibm:       __xlc__,__xlC__,__IBMC__,__IBMCPP__
+           pathscale: __PATHCC__,__PATHSCALE__
+           clang:     __clang__
+           gnu:       __GNUC__
+           sun:       __SUNPRO_C,__SUNPRO_CC
+           hp:        __HP_cc,__HP_aCC
+           dec:       __DECC,__DECCXX,__DECC_VER,__DECCXX_VER
+           borland:   __BORLANDC__,__TURBOC__
+           comeau:    __COMO__
+           cray:      _CRAYC
+           kai:       __KCC
+           lcc:       __LCC__
+           sgi:       __sgi,sgi
+           microsoft: _MSC_VER
+           metrowerks: __MWERKS__
+           watcom:    __WATCOMC__
+           portland:  __PGI
+           unknown:   UNKNOWN"
+  for ventest in $vendors; do
+    case $ventest in
+      *:) vendor=$ventest; continue ;;
+      *)  vencpp="defined("`echo $ventest | sed 's/,/) || defined(/g'`")" ;;
+    esac
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+      #if !($vencpp)
+        thisisanerror;
+      #endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  done
+  ax_cv_c_compiler_vendor=`echo $vendor | cut -d: -f1`
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_c_compiler_vendor" >&5
+$as_echo "$ax_cv_c_compiler_vendor" >&6; }
+
+
+
+
+
+
+# Check whether --enable-portable-binary was given.
+if test "${enable_portable_binary+set}" = set; then :
+  enableval=$enable_portable_binary; acx_maxopt_portable=$enableval
+else
+  acx_maxopt_portable=no
+fi
+
+
+# Try to determine "good" native compiler flags if none specified via CFLAGS
+if test "$ac_test_CFLAGS" != "set"; then
+  CFLAGS=""
+  case $ax_cv_c_compiler_vendor in
+    dec) CFLAGS="-newc -w0 -O5 -ansi_alias -ansi_args -fp_reorder -tune host"
+	 if test "x$acx_maxopt_portable" = xno; then
+           CFLAGS="$CFLAGS -arch host"
+         fi;;
+
+    sun) CFLAGS="-native -fast -xO5 -dalign"
+	 if test "x$acx_maxopt_portable" = xyes; then
+	   CFLAGS="$CFLAGS -xarch=generic"
+         fi;;
+
+    hp)  CFLAGS="+Oall +Optrs_ansi +DSnative"
+	 if test "x$acx_maxopt_portable" = xyes; then
+	   CFLAGS="$CFLAGS +DAportable"
+	 fi;;
+
+    ibm) if test "x$acx_maxopt_portable" = xno; then
+           xlc_opt="-qarch=auto -qtune=auto"
+	 else
+           xlc_opt="-qtune=auto"
+	 fi
+         as_CACHEVAR=`$as_echo "ax_cv_check_cflags__$xlc_opt" | $as_tr_sh`
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C compiler accepts $xlc_opt" >&5
+$as_echo_n "checking whether C compiler accepts $xlc_opt... " >&6; }
+if eval \${$as_CACHEVAR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+  ax_check_save_flags=$CFLAGS
+  CFLAGS="$CFLAGS  $xlc_opt"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$as_CACHEVAR=yes"
+else
+  eval "$as_CACHEVAR=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  CFLAGS=$ax_check_save_flags
+fi
+eval ac_res=\$$as_CACHEVAR
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+if test x"`eval 'as_val=${'$as_CACHEVAR'};$as_echo "$as_val"'`" = xyes; then :
+  CFLAGS="-O3 -qansialias -w $xlc_opt"
+else
+  CFLAGS="-O3 -qansialias -w"
+                echo "******************************************************"
+                echo "*  You seem to have the IBM  C compiler.  It is      *"
+                echo "*  recommended for best performance that you use:    *"
+                echo "*                                                    *"
+                echo "*    CFLAGS=-O3 -qarch=xxx -qtune=xxx -qansialias -w *"
+                echo "*                      ^^^        ^^^                *"
+                echo "*  where xxx is pwr2, pwr3, 604, or whatever kind of *"
+                echo "*  CPU you have.  (Set the CFLAGS environment var.   *"
+                echo "*  and re-run configure.)  For more info, man cc.    *"
+                echo "******************************************************"
+fi
+
+         ;;
+
+    intel) CFLAGS="-O3 -ansi_alias"
+	if test "x$acx_maxopt_portable" = xno; then
+	  icc_archflag=unknown
+	  icc_flags=""
+	  case $host_cpu in
+	    i686*|x86_64*)
+              # icc accepts gcc assembly syntax, so these should work:
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for x86 cpuid 0 output" >&5
+$as_echo_n "checking for x86 cpuid 0 output... " >&6; }
+if ${ax_cv_gcc_x86_cpuid_0+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ax_cv_gcc_x86_cpuid_0=unknown
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+
+     int op = 0, eax, ebx, ecx, edx;
+     FILE *f;
+      __asm__("cpuid"
+        : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx)
+        : "a" (op));
+     f = fopen("conftest_cpuid", "w"); if (!f) return 1;
+     fprintf(f, "%x:%x:%x:%x\n", eax, ebx, ecx, edx);
+     fclose(f);
+     return 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ax_cv_gcc_x86_cpuid_0=`cat conftest_cpuid`; rm -f conftest_cpuid
+else
+  ax_cv_gcc_x86_cpuid_0=unknown; rm -f conftest_cpuid
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_gcc_x86_cpuid_0" >&5
+$as_echo "$ax_cv_gcc_x86_cpuid_0" >&6; }
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for x86 cpuid 1 output" >&5
+$as_echo_n "checking for x86 cpuid 1 output... " >&6; }
+if ${ax_cv_gcc_x86_cpuid_1+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ax_cv_gcc_x86_cpuid_1=unknown
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+
+     int op = 1, eax, ebx, ecx, edx;
+     FILE *f;
+      __asm__("cpuid"
+        : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx)
+        : "a" (op));
+     f = fopen("conftest_cpuid", "w"); if (!f) return 1;
+     fprintf(f, "%x:%x:%x:%x\n", eax, ebx, ecx, edx);
+     fclose(f);
+     return 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ax_cv_gcc_x86_cpuid_1=`cat conftest_cpuid`; rm -f conftest_cpuid
+else
+  ax_cv_gcc_x86_cpuid_1=unknown; rm -f conftest_cpuid
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_gcc_x86_cpuid_1" >&5
+$as_echo "$ax_cv_gcc_x86_cpuid_1" >&6; }
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+	      case $ax_cv_gcc_x86_cpuid_0 in # see AX_GCC_ARCHFLAG
+                *:756e6547:*:*) # Intel
+                  case $ax_cv_gcc_x86_cpuid_1 in
+                    *6a?:*[234]:*:*|*6[789b]?:*:*:*) icc_flags="-xK";;
+                    *f3[347]:*:*:*|*f41347:*:*:*) icc_flags="-xP -xN -xW -xK";;
+                    *f??:*:*:*) icc_flags="-xN -xW -xK";;
+                  esac ;;
+              esac ;;
+          esac
+          if test "x$icc_flags" != x; then
+            for flag in $icc_flags; do
+              as_CACHEVAR=`$as_echo "ax_cv_check_cflags__$flag" | $as_tr_sh`
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C compiler accepts $flag" >&5
+$as_echo_n "checking whether C compiler accepts $flag... " >&6; }
+if eval \${$as_CACHEVAR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+  ax_check_save_flags=$CFLAGS
+  CFLAGS="$CFLAGS  $flag"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$as_CACHEVAR=yes"
+else
+  eval "$as_CACHEVAR=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  CFLAGS=$ax_check_save_flags
+fi
+eval ac_res=\$$as_CACHEVAR
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+if test x"`eval 'as_val=${'$as_CACHEVAR'};$as_echo "$as_val"'`" = xyes; then :
+  icc_archflag=$flag; break
+else
+  :
+fi
+
+            done
+          fi
+          { $as_echo "$as_me:${as_lineno-$LINENO}: checking for icc architecture flag" >&5
+$as_echo_n "checking for icc architecture flag... " >&6; }
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $icc_archflag" >&5
+$as_echo "$icc_archflag" >&6; }
+          if test "x$icc_archflag" != xunknown; then
+            CFLAGS="$CFLAGS $icc_archflag"
+          fi
+        fi
+	;;
+
+    gnu)
+     # default optimization flags for gcc on all systems
+     CFLAGS="-O3 -fomit-frame-pointer"
+
+     # -malign-double for x86 systems
+     # LIBFFI -- DON'T DO THIS - CHANGES ABI
+     # AX_CHECK_COMPILE_FLAG(-malign-double, CFLAGS="$CFLAGS -malign-double")
+
+     #  -fstrict-aliasing for gcc-2.95+
+     { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C compiler accepts -fstrict-aliasing" >&5
+$as_echo_n "checking whether C compiler accepts -fstrict-aliasing... " >&6; }
+if ${ax_cv_check_cflags___fstrict_aliasing+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+  ax_check_save_flags=$CFLAGS
+  CFLAGS="$CFLAGS  -fstrict-aliasing"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ax_cv_check_cflags___fstrict_aliasing=yes
+else
+  ax_cv_check_cflags___fstrict_aliasing=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  CFLAGS=$ax_check_save_flags
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_check_cflags___fstrict_aliasing" >&5
+$as_echo "$ax_cv_check_cflags___fstrict_aliasing" >&6; }
+if test x"$ax_cv_check_cflags___fstrict_aliasing" = xyes; then :
+  CFLAGS="$CFLAGS -fstrict-aliasing"
+else
+  :
+fi
+
+
+     # note that we enable "unsafe" fp optimization with other compilers, too
+     { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C compiler accepts -ffast-math" >&5
+$as_echo_n "checking whether C compiler accepts -ffast-math... " >&6; }
+if ${ax_cv_check_cflags___ffast_math+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+  ax_check_save_flags=$CFLAGS
+  CFLAGS="$CFLAGS  -ffast-math"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ax_cv_check_cflags___ffast_math=yes
+else
+  ax_cv_check_cflags___ffast_math=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  CFLAGS=$ax_check_save_flags
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_check_cflags___ffast_math" >&5
+$as_echo "$ax_cv_check_cflags___ffast_math" >&6; }
+if test x"$ax_cv_check_cflags___ffast_math" = xyes; then :
+  CFLAGS="$CFLAGS -ffast-math"
+else
+  :
+fi
+
+
+
+
+
+
+# Check whether --with-gcc-arch was given.
+if test "${with_gcc_arch+set}" = set; then :
+  withval=$with_gcc_arch; ax_gcc_arch=$withval
+else
+  ax_gcc_arch=yes
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for gcc architecture flag" >&5
+$as_echo_n "checking for gcc architecture flag... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: " >&5
+$as_echo "" >&6; }
+if ${ax_cv_gcc_archflag+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+ax_cv_gcc_archflag="unknown"
+
+if test "$GCC" = yes; then
+
+if test "x$ax_gcc_arch" = xyes; then
+ax_gcc_arch=""
+if test "$cross_compiling" = no; then
+case $host_cpu in
+  i[3456]86*|x86_64*) # use cpuid codes
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for x86 cpuid 0 output" >&5
+$as_echo_n "checking for x86 cpuid 0 output... " >&6; }
+if ${ax_cv_gcc_x86_cpuid_0+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ax_cv_gcc_x86_cpuid_0=unknown
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+
+     int op = 0, eax, ebx, ecx, edx;
+     FILE *f;
+      __asm__("cpuid"
+        : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx)
+        : "a" (op));
+     f = fopen("conftest_cpuid", "w"); if (!f) return 1;
+     fprintf(f, "%x:%x:%x:%x\n", eax, ebx, ecx, edx);
+     fclose(f);
+     return 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ax_cv_gcc_x86_cpuid_0=`cat conftest_cpuid`; rm -f conftest_cpuid
+else
+  ax_cv_gcc_x86_cpuid_0=unknown; rm -f conftest_cpuid
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_gcc_x86_cpuid_0" >&5
+$as_echo "$ax_cv_gcc_x86_cpuid_0" >&6; }
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for x86 cpuid 1 output" >&5
+$as_echo_n "checking for x86 cpuid 1 output... " >&6; }
+if ${ax_cv_gcc_x86_cpuid_1+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ax_cv_gcc_x86_cpuid_1=unknown
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+
+     int op = 1, eax, ebx, ecx, edx;
+     FILE *f;
+      __asm__("cpuid"
+        : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx)
+        : "a" (op));
+     f = fopen("conftest_cpuid", "w"); if (!f) return 1;
+     fprintf(f, "%x:%x:%x:%x\n", eax, ebx, ecx, edx);
+     fclose(f);
+     return 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ax_cv_gcc_x86_cpuid_1=`cat conftest_cpuid`; rm -f conftest_cpuid
+else
+  ax_cv_gcc_x86_cpuid_1=unknown; rm -f conftest_cpuid
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_gcc_x86_cpuid_1" >&5
+$as_echo "$ax_cv_gcc_x86_cpuid_1" >&6; }
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+     case $ax_cv_gcc_x86_cpuid_0 in
+       *:756e6547:*:*) # Intel
+          case $ax_cv_gcc_x86_cpuid_1 in
+	    *5[48]?:*:*:*) ax_gcc_arch="pentium-mmx pentium" ;;
+	    *5??:*:*:*) ax_gcc_arch=pentium ;;
+	    *0?6[3456]?:*:*:*) ax_gcc_arch="pentium2 pentiumpro" ;;
+	    *0?6a?:*[01]:*:*) ax_gcc_arch="pentium2 pentiumpro" ;;
+	    *0?6a?:*[234]:*:*) ax_gcc_arch="pentium3 pentiumpro" ;;
+	    *0?6[9de]?:*:*:*) ax_gcc_arch="pentium-m pentium3 pentiumpro" ;;
+	    *0?6[78b]?:*:*:*) ax_gcc_arch="pentium3 pentiumpro" ;;
+	    *0?6f?:*:*:*|*1?66?:*:*:*) ax_gcc_arch="core2 pentium-m pentium3 pentiumpro" ;;
+	    *1?6[7d]?:*:*:*) ax_gcc_arch="penryn core2 pentium-m pentium3 pentiumpro" ;;
+	    *1?6[aef]?:*:*:*|*2?6[5cef]?:*:*:*) ax_gcc_arch="corei7 core2 pentium-m pentium3 pentiumpro" ;;
+	    *1?6c?:*:*:*|*[23]?66?:*:*:*) ax_gcc_arch="atom core2 pentium-m pentium3 pentiumpro" ;;
+	    *2?6[ad]?:*:*:*) ax_gcc_arch="corei7-avx corei7 core2 pentium-m pentium3 pentiumpro" ;;
+	    *0?6??:*:*:*) ax_gcc_arch=pentiumpro ;;
+	    *6??:*:*:*) ax_gcc_arch="core2 pentiumpro" ;;
+	    ?000?f3[347]:*:*:*|?000?f41347:*:*:*|?000?f6?:*:*:*)
+		case $host_cpu in
+	          x86_64*) ax_gcc_arch="nocona pentium4 pentiumpro" ;;
+	          *) ax_gcc_arch="prescott pentium4 pentiumpro" ;;
+	        esac ;;
+	    ?000?f??:*:*:*) ax_gcc_arch="pentium4 pentiumpro";;
+          esac ;;
+       *:68747541:*:*) # AMD
+          case $ax_cv_gcc_x86_cpuid_1 in
+	    *5[67]?:*:*:*) ax_gcc_arch=k6 ;;
+	    *5[8d]?:*:*:*) ax_gcc_arch="k6-2 k6" ;;
+	    *5[9]?:*:*:*) ax_gcc_arch="k6-3 k6" ;;
+	    *60?:*:*:*) ax_gcc_arch=k7 ;;
+	    *6[12]?:*:*:*) ax_gcc_arch="athlon k7" ;;
+	    *6[34]?:*:*:*) ax_gcc_arch="athlon-tbird k7" ;;
+	    *67?:*:*:*) ax_gcc_arch="athlon-4 athlon k7" ;;
+	    *6[68a]?:*:*:*)
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for x86 cpuid 0x80000006 output" >&5
+$as_echo_n "checking for x86 cpuid 0x80000006 output... " >&6; }
+if ${ax_cv_gcc_x86_cpuid_0x80000006+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ax_cv_gcc_x86_cpuid_0x80000006=unknown
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+
+     int op = 0x80000006, eax, ebx, ecx, edx;
+     FILE *f;
+      __asm__("cpuid"
+        : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx)
+        : "a" (op));
+     f = fopen("conftest_cpuid", "w"); if (!f) return 1;
+     fprintf(f, "%x:%x:%x:%x\n", eax, ebx, ecx, edx);
+     fclose(f);
+     return 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ax_cv_gcc_x86_cpuid_0x80000006=`cat conftest_cpuid`; rm -f conftest_cpuid
+else
+  ax_cv_gcc_x86_cpuid_0x80000006=unknown; rm -f conftest_cpuid
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_gcc_x86_cpuid_0x80000006" >&5
+$as_echo "$ax_cv_gcc_x86_cpuid_0x80000006" >&6; }
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ # L2 cache size
+	       case $ax_cv_gcc_x86_cpuid_0x80000006 in
+                 *:*:*[1-9a-f]??????:*) # (L2 = ecx >> 16) >= 256
+			ax_gcc_arch="athlon-xp athlon-4 athlon k7" ;;
+                 *) ax_gcc_arch="athlon-4 athlon k7" ;;
+	       esac ;;
+	    ?00??f[4cef8b]?:*:*:*) ax_gcc_arch="athlon64 k8" ;;
+	    ?00??f5?:*:*:*) ax_gcc_arch="opteron k8" ;;
+	    ?00??f7?:*:*:*) ax_gcc_arch="athlon-fx opteron k8" ;;
+	    ?00??f??:*:*:*) ax_gcc_arch="k8" ;;
+	    ?05??f??:*:*:*) ax_gcc_arch="btver1 amdfam10 k8" ;;
+	    ?06??f??:*:*:*) ax_gcc_arch="bdver1 amdfam10 k8" ;;
+	    *f??:*:*:*) ax_gcc_arch="amdfam10 k8" ;;
+          esac ;;
+	*:746e6543:*:*) # IDT
+	   case $ax_cv_gcc_x86_cpuid_1 in
+	     *54?:*:*:*) ax_gcc_arch=winchip-c6 ;;
+	     *58?:*:*:*) ax_gcc_arch=winchip2 ;;
+	     *6[78]?:*:*:*) ax_gcc_arch=c3 ;;
+	     *69?:*:*:*) ax_gcc_arch="c3-2 c3" ;;
+	   esac ;;
+     esac
+     if test x"$ax_gcc_arch" = x; then # fallback
+	case $host_cpu in
+	  i586*) ax_gcc_arch=pentium ;;
+	  i686*) ax_gcc_arch=pentiumpro ;;
+        esac
+     fi
+     ;;
+
+  sparc*)
+     # Extract the first word of "prtdiag", so it can be a program name with args.
+set dummy prtdiag; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_PRTDIAG+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $PRTDIAG in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_PRTDIAG="$PRTDIAG" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_dummy="$PATH:/usr/platform/`uname -i`/sbin/:/usr/platform/`uname -m`/sbin/"
+for as_dir in $as_dummy
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_PRTDIAG="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  test -z "$ac_cv_path_PRTDIAG" && ac_cv_path_PRTDIAG="prtdiag"
+  ;;
+esac
+fi
+PRTDIAG=$ac_cv_path_PRTDIAG
+if test -n "$PRTDIAG"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PRTDIAG" >&5
+$as_echo "$PRTDIAG" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+     cputype=`(((grep cpu /proc/cpuinfo | cut -d: -f2) ; ($PRTDIAG -v |grep -i sparc) ; grep -i cpu /var/run/dmesg.boot ) | head -n 1) 2> /dev/null`
+     cputype=`echo "$cputype" | tr -d ' -' |tr $as_cr_LETTERS $as_cr_letters`
+     case $cputype in
+         *ultrasparciv*) ax_gcc_arch="ultrasparc4 ultrasparc3 ultrasparc v9" ;;
+         *ultrasparciii*) ax_gcc_arch="ultrasparc3 ultrasparc v9" ;;
+         *ultrasparc*) ax_gcc_arch="ultrasparc v9" ;;
+         *supersparc*|*tms390z5[05]*) ax_gcc_arch="supersparc v8" ;;
+         *hypersparc*|*rt62[056]*) ax_gcc_arch="hypersparc v8" ;;
+         *cypress*) ax_gcc_arch=cypress ;;
+     esac ;;
+
+  alphaev5) ax_gcc_arch=ev5 ;;
+  alphaev56) ax_gcc_arch=ev56 ;;
+  alphapca56) ax_gcc_arch="pca56 ev56" ;;
+  alphapca57) ax_gcc_arch="pca57 pca56 ev56" ;;
+  alphaev6) ax_gcc_arch=ev6 ;;
+  alphaev67) ax_gcc_arch=ev67 ;;
+  alphaev68) ax_gcc_arch="ev68 ev67" ;;
+  alphaev69) ax_gcc_arch="ev69 ev68 ev67" ;;
+  alphaev7) ax_gcc_arch="ev7 ev69 ev68 ev67" ;;
+  alphaev79) ax_gcc_arch="ev79 ev7 ev69 ev68 ev67" ;;
+
+  powerpc*)
+     cputype=`((grep cpu /proc/cpuinfo | head -n 1 | cut -d: -f2 | cut -d, -f1 | sed 's/ //g') ; /usr/bin/machine ; /bin/machine; grep CPU /var/run/dmesg.boot | head -n 1 | cut -d" " -f2) 2> /dev/null`
+     cputype=`echo $cputype | sed -e 's/ppc//g;s/ *//g'`
+     case $cputype in
+       *750*) ax_gcc_arch="750 G3" ;;
+       *740[0-9]*) ax_gcc_arch="$cputype 7400 G4" ;;
+       *74[4-5][0-9]*) ax_gcc_arch="$cputype 7450 G4" ;;
+       *74[0-9][0-9]*) ax_gcc_arch="$cputype G4" ;;
+       *970*) ax_gcc_arch="970 G5 power4";;
+       *POWER4*|*power4*|*gq*) ax_gcc_arch="power4 970";;
+       *POWER5*|*power5*|*gr*|*gs*) ax_gcc_arch="power5 power4 970";;
+       603ev|8240) ax_gcc_arch="$cputype 603e 603";;
+       *) ax_gcc_arch=$cputype ;;
+     esac
+     ax_gcc_arch="$ax_gcc_arch powerpc"
+     ;;
+esac
+fi # not cross-compiling
+fi # guess arch
+
+if test "x$ax_gcc_arch" != x -a "x$ax_gcc_arch" != xno; then
+for arch in $ax_gcc_arch; do
+  if test "x$acx_maxopt_portable" = xyes; then # if we require portable code
+    flags="-mtune=$arch"
+    # -mcpu=$arch and m$arch generate nonportable code on every arch except
+    # x86.  And some other arches (e.g. Alpha) don't accept -mtune.  Grrr.
+    case $host_cpu in i*86|x86_64*) flags="$flags -mcpu=$arch -m$arch";; esac
+  else
+    flags="-march=$arch -mcpu=$arch -m$arch"
+  fi
+  for flag in $flags; do
+    as_CACHEVAR=`$as_echo "ax_cv_check_cflags__$flag" | $as_tr_sh`
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C compiler accepts $flag" >&5
+$as_echo_n "checking whether C compiler accepts $flag... " >&6; }
+if eval \${$as_CACHEVAR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+  ax_check_save_flags=$CFLAGS
+  CFLAGS="$CFLAGS  $flag"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$as_CACHEVAR=yes"
+else
+  eval "$as_CACHEVAR=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  CFLAGS=$ax_check_save_flags
+fi
+eval ac_res=\$$as_CACHEVAR
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+if test x"`eval 'as_val=${'$as_CACHEVAR'};$as_echo "$as_val"'`" = xyes; then :
+  ax_cv_gcc_archflag=$flag; break
+else
+  :
+fi
+
+  done
+  test "x$ax_cv_gcc_archflag" = xunknown || break
+done
+fi
+
+fi # $GCC=yes
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for gcc architecture flag" >&5
+$as_echo_n "checking for gcc architecture flag... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_gcc_archflag" >&5
+$as_echo "$ax_cv_gcc_archflag" >&6; }
+if test "x$ax_cv_gcc_archflag" = xunknown; then
+  :
+else
+  CFLAGS="$CFLAGS $ax_cv_gcc_archflag"
+fi
+
+     ;;
+  esac
+
+  if test -z "$CFLAGS"; then
+	echo ""
+	echo "********************************************************"
+        echo "* WARNING: Don't know the best CFLAGS for this system  *"
+        echo "* Use ./configure CFLAGS=... to specify your own flags *"
+	echo "* (otherwise, a default of CFLAGS=-O3 will be used)    *"
+	echo "********************************************************"
+	echo ""
+        CFLAGS="-O3"
+  fi
+
+  as_CACHEVAR=`$as_echo "ax_cv_check_cflags__$CFLAGS" | $as_tr_sh`
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C compiler accepts $CFLAGS" >&5
+$as_echo_n "checking whether C compiler accepts $CFLAGS... " >&6; }
+if eval \${$as_CACHEVAR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+  ax_check_save_flags=$CFLAGS
+  CFLAGS="$CFLAGS  $CFLAGS"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$as_CACHEVAR=yes"
+else
+  eval "$as_CACHEVAR=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  CFLAGS=$ax_check_save_flags
+fi
+eval ac_res=\$$as_CACHEVAR
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+if test x"`eval 'as_val=${'$as_CACHEVAR'};$as_echo "$as_val"'`" = xyes; then :
+  :
+else
+
+	echo ""
+        echo "********************************************************"
+        echo "* WARNING: The guessed CFLAGS don't seem to work with  *"
+        echo "* your compiler.                                       *"
+        echo "* Use ./configure CFLAGS=... to specify your own flags *"
+        echo "********************************************************"
+        echo ""
+        CFLAGS=""
+
+fi
+
+
+fi
+
+# The AX_CFLAGS_WARN_ALL macro doesn't currently work for sunpro
+# compiler.
+if test "$ax_cv_c_compiler_vendor" != "sun"; then
+  if ${CFLAGS+:} false; then :
+  case " $CFLAGS " in
+    *"  "*)
+      { { $as_echo "$as_me:${as_lineno-$LINENO}: : CFLAGS already contains "; } >&5
+  (: CFLAGS already contains ) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      ;;
+    *)
+      { { $as_echo "$as_me:${as_lineno-$LINENO}: : CFLAGS=\"\$CFLAGS \""; } >&5
+  (: CFLAGS="$CFLAGS ") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      CFLAGS="$CFLAGS "
+      ;;
+   esac
+else
+  CFLAGS=""
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking CFLAGS for maximum warnings" >&5
+$as_echo_n "checking CFLAGS for maximum warnings... " >&6; }
+if ${ac_cv_cflags_warn_all+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_cflags_warn_all="no, unknown"
+ac_save_CFLAGS="$CFLAGS"
+for ac_arg in "-warn all  % -warn all"      "-pedantic  % -Wall"          "-xstrconst % -v"             "-std1      % -verbose -w0 -warnprotos"    "-qlanglvl=ansi % -qsrcmsg -qinfo=all:noppt:noppc:noobs:nocnd"    "-ansi -ansiE % -fullwarn"    "+ESlit     % +w1"            "-Xc        % -pvctl,fullmsg"    "-h conform % -h msglevel 2"    #
+do CFLAGS="$ac_save_CFLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_cflags_warn_all=`echo $ac_arg | sed -e 's,.*% *,,'` ; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+CFLAGS="$ac_save_CFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cflags_warn_all" >&5
+$as_echo "$ac_cv_cflags_warn_all" >&6; }
+
+case ".$ac_cv_cflags_warn_all" in
+     .ok|.ok,*)  ;;
+   .|.no|.no,*)  ;;
+   *) if ${CFLAGS+:} false; then :
+  case " $CFLAGS " in
+    *" $ac_cv_cflags_warn_all "*)
+      { { $as_echo "$as_me:${as_lineno-$LINENO}: : CFLAGS already contains \$ac_cv_cflags_warn_all"; } >&5
+  (: CFLAGS already contains $ac_cv_cflags_warn_all) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      ;;
+    *)
+      { { $as_echo "$as_me:${as_lineno-$LINENO}: : CFLAGS=\"\$CFLAGS \$ac_cv_cflags_warn_all\""; } >&5
+  (: CFLAGS="$CFLAGS $ac_cv_cflags_warn_all") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      CFLAGS="$CFLAGS $ac_cv_cflags_warn_all"
+      ;;
+   esac
+else
+  CFLAGS="$ac_cv_cflags_warn_all"
+fi
+ ;;
+esac
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+fi
+
+if test "x$GCC" = "xyes"; then
+  CFLAGS="$CFLAGS -fexceptions"
+  touch local.exp
+else
+  cat > local.exp <<EOF
+set CC_FOR_TARGET "$CC"
+EOF
+fi
+
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
 $as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
@@ -11005,7 +13116,7 @@
 for ac_header in sys/mman.h
 do :
   ac_fn_c_check_header_mongrel "$LINENO" "sys/mman.h" "ac_cv_header_sys_mman_h" "$ac_includes_default"
-if test "x$ac_cv_header_sys_mman_h" = x""yes; then :
+if test "x$ac_cv_header_sys_mman_h" = xyes; then :
   cat >>confdefs.h <<_ACEOF
 #define HAVE_SYS_MMAN_H 1
 _ACEOF
@@ -11017,7 +13128,7 @@
 for ac_func in mmap
 do :
   ac_fn_c_check_func "$LINENO" "mmap" "ac_cv_func_mmap"
-if test "x$ac_cv_func_mmap" = x""yes; then :
+if test "x$ac_cv_func_mmap" = xyes; then :
   cat >>confdefs.h <<_ACEOF
 #define HAVE_MMAP 1
 _ACEOF
@@ -11027,7 +13138,7 @@
 
 
 ac_fn_c_check_header_mongrel "$LINENO" "sys/mman.h" "ac_cv_header_sys_mman_h" "$ac_includes_default"
-if test "x$ac_cv_header_sys_mman_h" = x""yes; then :
+if test "x$ac_cv_header_sys_mman_h" = xyes; then :
   libffi_header_sys_mman_h=yes
 else
   libffi_header_sys_mman_h=no
@@ -11035,7 +13146,7 @@
 
 
 ac_fn_c_check_func "$LINENO" "mmap" "ac_cv_func_mmap"
-if test "x$ac_cv_func_mmap" = x""yes; then :
+if test "x$ac_cv_func_mmap" = xyes; then :
   libffi_func_mmap=yes
 else
   libffi_func_mmap=no
@@ -11049,7 +13160,7 @@
 else
    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether read-only mmap of a plain file works" >&5
 $as_echo_n "checking whether read-only mmap of a plain file works... " >&6; }
-if test "${ac_cv_func_mmap_file+set}" = set; then :
+if ${ac_cv_func_mmap_file+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   # Add a system to this blacklist if
@@ -11068,7 +13179,7 @@
 $as_echo "$ac_cv_func_mmap_file" >&6; }
    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether mmap from /dev/zero works" >&5
 $as_echo_n "checking whether mmap from /dev/zero works... " >&6; }
-if test "${ac_cv_func_mmap_dev_zero+set}" = set; then :
+if ${ac_cv_func_mmap_dev_zero+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   # Add a system to this blacklist if it has mmap() but /dev/zero
@@ -11094,7 +13205,7 @@
    # Unlike /dev/zero, the MAP_ANON(YMOUS) defines can be probed for.
    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for MAP_ANON(YMOUS)" >&5
 $as_echo_n "checking for MAP_ANON(YMOUS)... " >&6; }
-if test "${ac_cv_decl_map_anon+set}" = set; then :
+if ${ac_cv_decl_map_anon+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -11130,7 +13241,7 @@
    else
      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether mmap with MAP_ANON(YMOUS) works" >&5
 $as_echo_n "checking whether mmap with MAP_ANON(YMOUS) works... " >&6; }
-if test "${ac_cv_func_mmap_anon+set}" = set; then :
+if ${ac_cv_func_mmap_anon+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   # Add a system to this blacklist if it has mmap() and MAP_ANON or
@@ -11178,9 +13289,13 @@
 
 TARGETDIR="unknown"
 case "$host" in
+  aarch64*-*-*)
+	TARGET=AARCH64; TARGETDIR=aarch64
+	;;
+
   alpha*-*-*)
 	TARGET=ALPHA; TARGETDIR=alpha;
-	# Support 128-bit long double, changable via command-line switch.
+	# Support 128-bit long double, changeable via command-line switch.
 	HAVE_LONG_DOUBLE='defined(__LONG_DOUBLE_128__)'
 	;;
 
@@ -11194,12 +13309,20 @@
 
   amd64-*-freebsd*)
 	TARGET=X86_64; TARGETDIR=x86
+  	;;
+
+  amd64-*-freebsd*)
+	TARGET=X86_64; TARGETDIR=x86
 	;;
 
   avr32*-*-*)
 	TARGET=AVR32; TARGETDIR=avr32
 	;;
 
+  bfin*)
+  	TARGET=BFIN; TARGETDIR=bfin
+  	;;
+
   cris-*-*)
 	TARGET=LIBFFI_CRIS; TARGETDIR=cris
 	;;
@@ -11208,7 +13331,7 @@
 	TARGET=FRV; TARGETDIR=frv
 	;;
 
-  hppa*-*-linux* | parisc*-*-linux*)
+  hppa*-*-linux* | parisc*-*-linux* | hppa*-*-openbsd*)
 	TARGET=PA_LINUX; TARGETDIR=pa
 	;;
   hppa*64-*-hpux*)
@@ -11221,22 +13344,65 @@
   i?86-*-freebsd* | i?86-*-openbsd*)
 	TARGET=X86_FREEBSD; TARGETDIR=x86
 	;;
-  i?86-win32* | i?86-*-cygwin* | i?86-*-mingw*)
+  i?86-win32* | i?86-*-cygwin* | i?86-*-mingw* | i?86-*-os2* | i?86-*-interix*)
 	TARGET=X86_WIN32; TARGETDIR=x86
-	# All mingw/cygwin/win32 builds require this for sharedlib
-	AM_LTLDFLAGS="-no-undefined"
+	# All mingw/cygwin/win32 builds require -no-undefined for sharedlib.
+	# We must also check with_cross_host to decide if this is a native
+	# or cross-build and select where to install dlls appropriately.
+	if test -n "$with_cross_host" &&
+	   test x"$with_cross_host" != x"no"; then
+	  AM_LTLDFLAGS='-no-undefined -bindir "$(toolexeclibdir)"';
+	else
+	  AM_LTLDFLAGS='-no-undefined -bindir "$(bindir)"';
+	fi
 	;;
   i?86-*-darwin*)
 	TARGET=X86_DARWIN; TARGETDIR=x86
 	;;
   i?86-*-solaris2.1[0-9]*)
-	TARGET=X86_64; TARGETDIR=x86
+	TARGETDIR=x86
+	if test $ac_cv_sizeof_size_t = 4; then
+	  TARGET=X86;
+	else
+	  TARGET=X86_64;
+	fi
 	;;
+
   i*86-*-nto-qnx*)
         TARGET=X86; TARGETDIR=x86
         ;;
-  i?86-*-*)
-	TARGET=X86; TARGETDIR=x86
+
+  x86_64-*-darwin*)
+	TARGET=X86_DARWIN; TARGETDIR=x86
+	;;
+
+  x86_64-*-cygwin* | x86_64-*-mingw*)
+	TARGET=X86_WIN64; TARGETDIR=x86
+	# All mingw/cygwin/win32 builds require -no-undefined for sharedlib.
+	# We must also check with_cross_host to decide if this is a native
+	# or cross-build and select where to install dlls appropriately.
+	if test -n "$with_cross_host" &&
+	   test x"$with_cross_host" != x"no"; then
+	  AM_LTLDFLAGS='-no-undefined -bindir "$(toolexeclibdir)"';
+	else
+	  AM_LTLDFLAGS='-no-undefined -bindir "$(bindir)"';
+	fi
+	;;
+
+  i?86-*-* | x86_64-*-*)
+	TARGETDIR=x86
+	if test $ac_cv_sizeof_size_t = 4; then
+	  case "$host" in
+	    *-gnux32)
+	      TARGET=X86_64
+	      ;;
+	    *)
+	      TARGET=X86
+	      ;;
+          esac
+	else
+	  TARGET=X86_64;
+	fi
 	;;
 
   ia64*-*-*)
@@ -11251,10 +13417,22 @@
 	TARGET=M68K; TARGETDIR=m68k
 	;;
 
-  mips-sgi-irix5.* | mips-sgi-irix6.*)
+  microblaze*-*-*)
+	TARGET=MICROBLAZE; TARGETDIR=microblaze
+	;;
+
+  moxie-*-*)
+	TARGET=MOXIE; TARGETDIR=moxie
+	;;
+
+  metag-*-*)
+	TARGET=METAG; TARGETDIR=metag
+	;;
+
+  mips-sgi-irix5.* | mips-sgi-irix6.* | mips*-*-rtems*)
 	TARGET=MIPS_IRIX; TARGETDIR=mips
 	;;
-  mips*-*-linux*)
+  mips*-*-linux* | mips*-*-openbsd*)
 	# Support 128-bit long double for NewABI.
 	HAVE_LONG_DOUBLE='defined(__mips64)'
 	TARGET=MIPS_IRIX; TARGETDIR=mips
@@ -11263,18 +13441,24 @@
   powerpc*-*-linux* | powerpc-*-sysv*)
 	TARGET=POWERPC; TARGETDIR=powerpc
 	;;
+  powerpc-*-amigaos*)
+	TARGET=POWERPC; TARGETDIR=powerpc
+	;;
   powerpc-*-beos*)
 	TARGET=POWERPC; TARGETDIR=powerpc
 	;;
-  powerpc-*-darwin*)
+  powerpc-*-darwin* | powerpc64-*-darwin*)
 	TARGET=POWERPC_DARWIN; TARGETDIR=powerpc
 	;;
   powerpc-*-aix* | rs6000-*-aix*)
 	TARGET=POWERPC_AIX; TARGETDIR=powerpc
 	;;
-  powerpc-*-freebsd*)
+  powerpc-*-freebsd* | powerpc-*-openbsd*)
 	TARGET=POWERPC_FREEBSD; TARGETDIR=powerpc
 	;;
+  powerpc64-*-freebsd*)
+	TARGET=POWERPC; TARGETDIR=powerpc
+	;;
   powerpc*-*-rtems*)
 	TARGET=POWERPC; TARGETDIR=powerpc
 	;;
@@ -11294,24 +13478,21 @@
 	TARGET=SPARC; TARGETDIR=sparc
 	;;
 
-  x86_64-*-darwin*)
-	TARGET=X86_DARWIN; TARGETDIR=x86
+  tile*-*)
+        TARGET=TILE; TARGETDIR=tile
+        ;;
+
+  xtensa*-*)
+	TARGET=XTENSA; TARGETDIR=xtensa
 	;;
 
-  x86_64-*-cygwin* | x86_64-*-mingw*)
-	TARGET=X86_WIN64; TARGETDIR=x86
-	;;
-
-  x86_64-*-*)
-	TARGET=X86_64; TARGETDIR=x86
-	;;
 esac
 
 
 
 
 if test $TARGETDIR = unknown; then
-  as_fn_error "\"libffi has not been ported to $host.\"" "$LINENO" 5
+  as_fn_error $? "\"libffi has not been ported to $host.\"" "$LINENO" 5
 fi
 
  if expr x$TARGET : 'xMIPS' > /dev/null; then
@@ -11322,6 +13503,14 @@
   MIPS_FALSE=
 fi
 
+ if test x$TARGET = xBFIN; then
+  BFIN_TRUE=
+  BFIN_FALSE='#'
+else
+  BFIN_TRUE='#'
+  BFIN_FALSE=
+fi
+
  if test x$TARGET = xSPARC; then
   SPARC_TRUE=
   SPARC_FALSE='#'
@@ -11402,6 +13591,30 @@
   M68K_FALSE=
 fi
 
+ if test x$TARGET = xMICROBLAZE; then
+  MICROBLAZE_TRUE=
+  MICROBLAZE_FALSE='#'
+else
+  MICROBLAZE_TRUE='#'
+  MICROBLAZE_FALSE=
+fi
+
+ if test x$TARGET = xMETAG; then
+  METAG_TRUE=
+  METAG_FALSE='#'
+else
+  METAG_TRUE='#'
+  METAG_FALSE=
+fi
+
+ if test x$TARGET = xMOXIE; then
+  MOXIE_TRUE=
+  MOXIE_FALSE='#'
+else
+  MOXIE_TRUE='#'
+  MOXIE_FALSE=
+fi
+
  if test x$TARGET = xPOWERPC; then
   POWERPC_TRUE=
   POWERPC_FALSE='#'
@@ -11434,6 +13647,14 @@
   POWERPC_FREEBSD_FALSE=
 fi
 
+ if test x$TARGET = xAARCH64; then
+  AARCH64_TRUE=
+  AARCH64_FALSE='#'
+else
+  AARCH64_TRUE='#'
+  AARCH64_FALSE=
+fi
+
  if test x$TARGET = xARM; then
   ARM_TRUE=
   ARM_FALSE='#'
@@ -11522,10 +13743,26 @@
   PA64_HPUX_FALSE=
 fi
 
+ if test x$TARGET = xTILE; then
+  TILE_TRUE=
+  TILE_FALSE='#'
+else
+  TILE_TRUE='#'
+  TILE_FALSE=
+fi
+
+ if test x$TARGET = xXTENSA; then
+  XTENSA_TRUE=
+  XTENSA_FALSE='#'
+else
+  XTENSA_TRUE='#'
+  XTENSA_FALSE=
+fi
+
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
 $as_echo_n "checking for ANSI C header files... " >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then :
+if ${ac_cv_header_stdc+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -11638,7 +13875,7 @@
 for ac_func in memcpy
 do :
   ac_fn_c_check_func "$LINENO" "memcpy" "ac_cv_func_memcpy"
-if test "x$ac_cv_func_memcpy" = x""yes; then :
+if test "x$ac_cv_func_memcpy" = xyes; then :
   cat >>confdefs.h <<_ACEOF
 #define HAVE_MEMCPY 1
 _ACEOF
@@ -11646,11 +13883,22 @@
 fi
 done
 
+ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default"
+if test "x$ac_cv_type_size_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define size_t unsigned int
+_ACEOF
+
+fi
+
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working alloca.h" >&5
 $as_echo_n "checking for working alloca.h... " >&6; }
-if test "${ac_cv_working_alloca_h+set}" = set; then :
+if ${ac_cv_working_alloca_h+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -11683,7 +13931,7 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for alloca" >&5
 $as_echo_n "checking for alloca... " >&6; }
-if test "${ac_cv_func_alloca_works+set}" = set; then :
+if ${ac_cv_func_alloca_works+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -11702,7 +13950,7 @@
  #pragma alloca
 #   else
 #    ifndef alloca /* predefined by HP cc +Olibcalls */
-char *alloca ();
+void *alloca (size_t);
 #    endif
 #   endif
 #  endif
@@ -11746,7 +13994,7 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether \`alloca.c' needs Cray hooks" >&5
 $as_echo_n "checking whether \`alloca.c' needs Cray hooks... " >&6; }
-if test "${ac_cv_os_cray+set}" = set; then :
+if ${ac_cv_os_cray+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -11773,8 +14021,7 @@
   for ac_func in _getb67 GETB67 getb67; do
     as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
 ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-eval as_val=\$$as_ac_var
-   if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
 
 cat >>confdefs.h <<_ACEOF
 #define CRAY_STACKSEG_END $ac_func
@@ -11788,7 +14035,7 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking stack direction for C alloca" >&5
 $as_echo_n "checking stack direction for C alloca... " >&6; }
-if test "${ac_cv_c_stack_direction+set}" = set; then :
+if ${ac_cv_c_stack_direction+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test "$cross_compiling" = yes; then :
@@ -11798,23 +14045,20 @@
 /* end confdefs.h.  */
 $ac_includes_default
 int
-find_stack_direction ()
+find_stack_direction (int *addr, int depth)
 {
-  static char *addr = 0;
-  auto char dummy;
-  if (addr == 0)
-    {
-      addr = &dummy;
-      return find_stack_direction ();
-    }
-  else
-    return (&dummy > addr) ? 1 : -1;
+  int dir, dummy = 0;
+  if (! addr)
+    addr = &dummy;
+  *addr = addr < &dummy ? 1 : addr == &dummy ? 0 : -1;
+  dir = depth ? find_stack_direction (addr, depth - 1) : 0;
+  return dir + dummy;
 }
 
 int
-main ()
+main (int argc, char **argv)
 {
-  return find_stack_direction () < 0;
+  return find_stack_direction (0, argc + !argv + 20) < 0;
 }
 _ACEOF
 if ac_fn_c_try_run "$LINENO"; then :
@@ -11843,7 +14087,7 @@
 # This bug is HP SR number 8606223364.
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking size of double" >&5
 $as_echo_n "checking size of double... " >&6; }
-if test "${ac_cv_sizeof_double+set}" = set; then :
+if ${ac_cv_sizeof_double+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (double))" "ac_cv_sizeof_double"        "$ac_includes_default"; then :
@@ -11852,9 +14096,8 @@
   if test "$ac_cv_type_double" = yes; then
      { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ as_fn_set_status 77
-as_fn_error "cannot compute sizeof (double)
-See \`config.log' for more details." "$LINENO" 5; }; }
+as_fn_error 77 "cannot compute sizeof (double)
+See \`config.log' for more details" "$LINENO" 5; }
    else
      ac_cv_sizeof_double=0
    fi
@@ -11877,7 +14120,7 @@
 # This bug is HP SR number 8606223364.
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long double" >&5
 $as_echo_n "checking size of long double... " >&6; }
-if test "${ac_cv_sizeof_long_double+set}" = set; then :
+if ${ac_cv_sizeof_long_double+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (long double))" "ac_cv_sizeof_long_double"        "$ac_includes_default"; then :
@@ -11886,9 +14129,8 @@
   if test "$ac_cv_type_long_double" = yes; then
      { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ as_fn_set_status 77
-as_fn_error "cannot compute sizeof (long double)
-See \`config.log' for more details." "$LINENO" 5; }; }
+as_fn_error 77 "cannot compute sizeof (long double)
+See \`config.log' for more details" "$LINENO" 5; }
    else
      ac_cv_sizeof_long_double=0
    fi
@@ -11922,7 +14164,7 @@
 
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5
 $as_echo_n "checking whether byte ordering is bigendian... " >&6; }
-if test "${ac_cv_c_bigendian+set}" = set; then :
+if ${ac_cv_c_bigendian+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_cv_c_bigendian=unknown
@@ -12140,18 +14382,18 @@
 
      ;; #(
    *)
-     as_fn_error "unknown endianness
+     as_fn_error $? "unknown endianness
  presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;;
  esac
 
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler .cfi pseudo-op support" >&5
 $as_echo_n "checking assembler .cfi pseudo-op support... " >&6; }
-if test "${libffi_cv_as_cfi_pseudo_op+set}" = set; then :
+if ${gcc_cv_as_cfi_pseudo_op+:} false; then :
   $as_echo_n "(cached) " >&6
 else
 
-    libffi_cv_as_cfi_pseudo_op=unknown
+    gcc_cv_as_cfi_pseudo_op=unknown
     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 asm (".cfi_startproc\n\t.cfi_endproc");
@@ -12164,25 +14406,26 @@
 }
 _ACEOF
 if ac_fn_c_try_compile "$LINENO"; then :
-  libffi_cv_as_cfi_pseudo_op=yes
+  gcc_cv_as_cfi_pseudo_op=yes
 else
-  libffi_cv_as_cfi_pseudo_op=no
+  gcc_cv_as_cfi_pseudo_op=no
 fi
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 
 fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libffi_cv_as_cfi_pseudo_op" >&5
-$as_echo "$libffi_cv_as_cfi_pseudo_op" >&6; }
-if test "x$libffi_cv_as_cfi_pseudo_op" = xyes; then
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_cfi_pseudo_op" >&5
+$as_echo "$gcc_cv_as_cfi_pseudo_op" >&6; }
+ if test "x$gcc_cv_as_cfi_pseudo_op" = xyes; then
 
 $as_echo "#define HAVE_AS_CFI_PSEUDO_OP 1" >>confdefs.h
 
-fi
+ fi
+
 
 if test x$TARGET = xSPARC; then
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler and linker support unaligned pc related relocs" >&5
 $as_echo_n "checking assembler and linker support unaligned pc related relocs... " >&6; }
-if test "${libffi_cv_as_sparc_ua_pcrel+set}" = set; then :
+if ${libffi_cv_as_sparc_ua_pcrel+:} false; then :
   $as_echo_n "(cached) " >&6
 else
 
@@ -12221,7 +14464,7 @@
 
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler .register pseudo-op support" >&5
 $as_echo_n "checking assembler .register pseudo-op support... " >&6; }
-if test "${libffi_cv_as_register_pseudo_op+set}" = set; then :
+if ${libffi_cv_as_register_pseudo_op+:} false; then :
   $as_echo_n "(cached) " >&6
 else
 
@@ -12229,11 +14472,11 @@
        # Check if we have .register
        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
-asm (".register %g2, #scratch");
+
 int
 main ()
 {
-
+asm (".register %g2, #scratch");
   ;
   return 0;
 }
@@ -12258,7 +14501,7 @@
 if test x$TARGET = xX86 || test x$TARGET = xX86_WIN32 || test x$TARGET = xX86_64; then
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler supports pc related relocs" >&5
 $as_echo_n "checking assembler supports pc related relocs... " >&6; }
-if test "${libffi_cv_as_x86_pcrel+set}" = set; then :
+if ${libffi_cv_as_x86_pcrel+:} false; then :
   $as_echo_n "(cached) " >&6
 else
 
@@ -12276,77 +14519,255 @@
 $as_echo "#define HAVE_AS_X86_PCREL 1" >>confdefs.h
 
     fi
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler .ascii pseudo-op support" >&5
+$as_echo_n "checking assembler .ascii pseudo-op support... " >&6; }
+if ${libffi_cv_as_ascii_pseudo_op+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+       libffi_cv_as_ascii_pseudo_op=unknown
+       # Check if we have .ascii
+       cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+asm (".ascii \\"string\\"");
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  libffi_cv_as_ascii_pseudo_op=yes
+else
+  libffi_cv_as_ascii_pseudo_op=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libffi_cv_as_ascii_pseudo_op" >&5
+$as_echo "$libffi_cv_as_ascii_pseudo_op" >&6; }
+    if test "x$libffi_cv_as_ascii_pseudo_op" = xyes; then
+
+$as_echo "#define HAVE_AS_ASCII_PSEUDO_OP 1" >>confdefs.h
+
+    fi
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler .string pseudo-op support" >&5
+$as_echo_n "checking assembler .string pseudo-op support... " >&6; }
+if ${libffi_cv_as_string_pseudo_op+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+       libffi_cv_as_string_pseudo_op=unknown
+       # Check if we have .string
+       cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+asm (".string \\"string\\"");
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  libffi_cv_as_string_pseudo_op=yes
+else
+  libffi_cv_as_string_pseudo_op=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libffi_cv_as_string_pseudo_op" >&5
+$as_echo "$libffi_cv_as_string_pseudo_op" >&6; }
+    if test "x$libffi_cv_as_string_pseudo_op" = xyes; then
+
+$as_echo "#define HAVE_AS_STRING_PSEUDO_OP 1" >>confdefs.h
+
+    fi
 fi
 
+# On PaX enable kernels that have MPROTECT enable we can't use PROT_EXEC.
+# Check whether --enable-pax_emutramp was given.
+if test "${enable_pax_emutramp+set}" = set; then :
+  enableval=$enable_pax_emutramp; if test "$enable_pax_emutramp" = "yes"; then
+
+$as_echo "#define FFI_MMAP_EXEC_EMUTRAMP_PAX 1" >>confdefs.h
+
+  fi
+fi
+
+
+if test x$TARGET = xX86_WIN64; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _ prefix in compiled symbols" >&5
+$as_echo_n "checking for _ prefix in compiled symbols... " >&6; }
+if ${lt_cv_sys_symbol_underscore+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sys_symbol_underscore=no
+  cat > conftest.$ac_ext <<_LT_EOF
+void nm_test_func(){}
+int main(){nm_test_func;return 0;}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    # Now try to grab the symbols.
+    ac_nlist=conftest.nm
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $ac_nlist\""; } >&5
+  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "$ac_nlist"; then
+      # See whether the symbols have a leading underscore.
+      if grep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
+        lt_cv_sys_symbol_underscore=yes
+      else
+        if grep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
+	  :
+        else
+	  echo "configure: cannot find nm_test_func in $ac_nlist" >&5
+        fi
+      fi
+    else
+      echo "configure: cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "configure: failed program was:" >&5
+    cat conftest.c >&5
+  fi
+  rm -rf conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_symbol_underscore" >&5
+$as_echo "$lt_cv_sys_symbol_underscore" >&6; }
+  sys_symbol_underscore=$lt_cv_sys_symbol_underscore
+
+
+    if test "x$sys_symbol_underscore" = xyes; then
+
+$as_echo "#define SYMBOL_UNDERSCORE 1" >>confdefs.h
+
+    fi
+fi
+
+FFI_EXEC_TRAMPOLINE_TABLE=0
 case "$target" in
-     *-apple-darwin10* | *-*-freebsd* | *-*-openbsd* | *-pc-solaris*)
+     *arm*-apple-darwin*)
+       FFI_EXEC_TRAMPOLINE_TABLE=1
+
+$as_echo "#define FFI_EXEC_TRAMPOLINE_TABLE 1" >>confdefs.h
+
+     ;;
+     *-apple-darwin1* | *-*-freebsd* | *-*-kfreebsd* | *-*-openbsd* | *-pc-solaris*)
 
 $as_echo "#define FFI_MMAP_EXEC_WRIT 1" >>confdefs.h
 
      ;;
 esac
+ if test x$FFI_EXEC_TRAMPOLINE_TABLE = x1; then
+  FFI_EXEC_TRAMPOLINE_TABLE_TRUE=
+  FFI_EXEC_TRAMPOLINE_TABLE_FALSE='#'
+else
+  FFI_EXEC_TRAMPOLINE_TABLE_TRUE='#'
+  FFI_EXEC_TRAMPOLINE_TABLE_FALSE=
+fi
 
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether .eh_frame section should be read-only" >&5
-$as_echo_n "checking whether .eh_frame section should be read-only... " >&6; }
-if test "${libffi_cv_ro_eh_frame+set}" = set; then :
+
+
+if test x$TARGET = xX86_64; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler supports unwind section type" >&5
+$as_echo_n "checking assembler supports unwind section type... " >&6; }
+if ${libffi_cv_as_x86_64_unwind_section_type+:} false; then :
   $as_echo_n "(cached) " >&6
 else
 
-	libffi_cv_ro_eh_frame=no
-	echo 'extern void foo (void); void bar (void) { foo (); foo (); }' > conftest.c
-	if $CC $CFLAGS -S -fpic -fexceptions -o conftest.s conftest.c > /dev/null 2>&1; then
-	    if grep '.section.*eh_frame.*"a"' conftest.s > /dev/null; then
-		libffi_cv_ro_eh_frame=yes
-	    elif grep '.section.*eh_frame.*#alloc' conftest.c \
-		 | grep -v '#write' > /dev/null; then
-		libffi_cv_ro_eh_frame=yes
-	    fi
+	libffi_cv_as_x86_64_unwind_section_type=yes
+	echo '.section .eh_frame,"a",@unwind' > conftest.s
+	if $CC $CFLAGS -c conftest.s 2>&1 | grep -i warning > /dev/null; then
+	    libffi_cv_as_x86_64_unwind_section_type=no
 	fi
-	rm -f conftest.*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libffi_cv_as_x86_64_unwind_section_type" >&5
+$as_echo "$libffi_cv_as_x86_64_unwind_section_type" >&6; }
+    if test "x$libffi_cv_as_x86_64_unwind_section_type" = xyes; then
+
+$as_echo "#define HAVE_AS_X86_64_UNWIND_SECTION_TYPE 1" >>confdefs.h
+
+    fi
+fi
+
+if test "x$GCC" = "xyes"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether .eh_frame section should be read-only" >&5
+$as_echo_n "checking whether .eh_frame section should be read-only... " >&6; }
+if ${libffi_cv_ro_eh_frame+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+  	libffi_cv_ro_eh_frame=no
+  	echo 'extern void foo (void); void bar (void) { foo (); foo (); }' > conftest.c
+  	if $CC $CFLAGS -c -fpic -fexceptions -o conftest.o conftest.c > /dev/null 2>&1; then
+	    objdump -h conftest.o > conftest.dump 2>&1
+	    libffi_eh_frame_line=`grep -n eh_frame conftest.dump | cut -d: -f 1`
+	    libffi_test_line=`expr $libffi_eh_frame_line + 1`p
+	    sed -n $libffi_test_line conftest.dump > conftest.line
+  	    if grep READONLY conftest.line > /dev/null; then
+  		libffi_cv_ro_eh_frame=yes
+  	    fi
+  	fi
+  	rm -f conftest.*
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $libffi_cv_ro_eh_frame" >&5
 $as_echo "$libffi_cv_ro_eh_frame" >&6; }
-if test "x$libffi_cv_ro_eh_frame" = xyes; then
+  if test "x$libffi_cv_ro_eh_frame" = xyes; then
 
 $as_echo "#define HAVE_RO_EH_FRAME 1" >>confdefs.h
 
 
 $as_echo "#define EH_FRAME_FLAGS \"a\"" >>confdefs.h
 
-else
+  else
 
 $as_echo "#define EH_FRAME_FLAGS \"aw\"" >>confdefs.h
 
-fi
+  fi
 
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for __attribute__((visibility(\"hidden\")))" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for __attribute__((visibility(\"hidden\")))" >&5
 $as_echo_n "checking for __attribute__((visibility(\"hidden\")))... " >&6; }
-if test "${libffi_cv_hidden_visibility_attribute+set}" = set; then :
+if ${libffi_cv_hidden_visibility_attribute+:} false; then :
   $as_echo_n "(cached) " >&6
 else
 
-	echo 'int __attribute__ ((visibility ("hidden"))) foo (void) { return 1; }' > conftest.c
-	libffi_cv_hidden_visibility_attribute=no
-	if { ac_try='${CC-cc} -Werror -S conftest.c -o conftest.s 1>&5'
+  	echo 'int __attribute__ ((visibility ("hidden"))) foo (void) { return 1  ; }' > conftest.c
+  	libffi_cv_hidden_visibility_attribute=no
+  	if { ac_try='${CC-cc} -Werror -S conftest.c -o conftest.s 1>&5'
   { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
   (eval $ac_try) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; }; then
-	    if grep '\.hidden.*foo' conftest.s >/dev/null; then
-		libffi_cv_hidden_visibility_attribute=yes
-	    fi
-	fi
-	rm -f conftest.*
+  	    if grep '\.hidden.*foo' conftest.s >/dev/null; then
+  		libffi_cv_hidden_visibility_attribute=yes
+  	    fi
+  	fi
+  	rm -f conftest.*
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $libffi_cv_hidden_visibility_attribute" >&5
 $as_echo "$libffi_cv_hidden_visibility_attribute" >&6; }
-if test $libffi_cv_hidden_visibility_attribute = yes; then
+  if test $libffi_cv_hidden_visibility_attribute = yes; then
 
 $as_echo "#define HAVE_HIDDEN_VISIBILITY_ATTRIBUTE 1" >>confdefs.h
 
+  fi
 fi
 
 
@@ -12365,6 +14786,14 @@
   fi
 fi
 
+ if test "$enable_debug" = "yes"; then
+  FFI_DEBUG_TRUE=
+  FFI_DEBUG_FALSE='#'
+else
+  FFI_DEBUG_TRUE='#'
+  FFI_DEBUG_FALSE=
+fi
+
 
 # Check whether --enable-structs was given.
 if test "${enable_structs+set}" = set; then :
@@ -12375,6 +14804,14 @@
   fi
 fi
 
+ if test "$enable_debug" = "yes"; then
+  FFI_DEBUG_TRUE=
+  FFI_DEBUG_FALSE='#'
+else
+  FFI_DEBUG_TRUE='#'
+  FFI_DEBUG_FALSE=
+fi
+
 
 # Check whether --enable-raw-api was given.
 if test "${enable_raw_api+set}" = set; then :
@@ -12396,28 +14833,28 @@
 fi
 
 
-if test -n "$with_cross_host" &&
-   test x"$with_cross_host" != x"no"; then
-  toolexecdir='$(exec_prefix)/$(target_alias)'
-  toolexeclibdir='$(toolexecdir)/lib'
+# These variables are only ever used when we cross-build to X86_WIN32.
+# And we only support this with GCC, so...
+if test "x$GCC" = "xyes"; then
+  if test -n "$with_cross_host" &&
+     test x"$with_cross_host" != x"no"; then
+    toolexecdir='$(exec_prefix)/$(target_alias)'
+    toolexeclibdir='$(toolexecdir)/lib'
+  else
+    toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
+    toolexeclibdir='$(libdir)'
+  fi
+  multi_os_directory=`$CC -print-multi-os-directory`
+  case $multi_os_directory in
+    .) ;; # Avoid trailing /.
+    ../*) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
+  esac
+
 else
-  toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
   toolexeclibdir='$(libdir)'
 fi
-multi_os_directory=`$CC -print-multi-os-directory`
-case $multi_os_directory in
-  .) ;; # Avoid trailing /.
-  *) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
-esac
 
 
-
-if test "${multilib}" = "yes"; then
-  multilib_arg="--enable-multilib"
-else
-  multilib_arg=
-fi
-
 ac_config_commands="$ac_config_commands include"
 
 ac_config_commands="$ac_config_commands src"
@@ -12499,10 +14936,21 @@
      :end' >>confcache
 if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
   if test -w "$cache_file"; then
-    test "x$cache_file" != "x/dev/null" &&
+    if test "x$cache_file" != "x/dev/null"; then
       { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
 $as_echo "$as_me: updating cache $cache_file" >&6;}
-    cat confcache >$cache_file
+      if test ! -f "$cache_file" || test -h "$cache_file"; then
+	cat confcache >"$cache_file"
+      else
+        case $cache_file in #(
+        */* | ?:*)
+	  mv -f confcache "$cache_file"$$ &&
+	  mv -f "$cache_file"$$ "$cache_file" ;; #(
+        *)
+	  mv -f confcache "$cache_file" ;;
+	esac
+      fi
+    fi
   else
     { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
@@ -12518,6 +14966,7 @@
 
 ac_libobjs=
 ac_ltlibobjs=
+U=
 for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
   # 1. Remove the extension, and $U if already installed.
   ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
@@ -12532,6 +14981,14 @@
 LTLIBOBJS=$ac_ltlibobjs
 
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
+$as_echo_n "checking that generated files are newer than configure... " >&6; }
+   if test -n "$am_sleep_pid"; then
+     # Hide warnings about reused PIDs.
+     wait $am_sleep_pid 2>/dev/null
+   fi
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
+$as_echo "done" >&6; }
  if test -n "$EXEEXT"; then
   am__EXEEXT_TRUE=
   am__EXEEXT_FALSE='#'
@@ -12541,132 +14998,172 @@
 fi
 
 if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
-  as_fn_error "conditional \"AMDEP\" was never defined.
+  as_fn_error $? "conditional \"AMDEP\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
-  as_fn_error "conditional \"am__fastdepCC\" was never defined.
+  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${am__fastdepCCAS_TRUE}" && test -z "${am__fastdepCCAS_FALSE}"; then
-  as_fn_error "conditional \"am__fastdepCCAS\" was never defined.
+  as_fn_error $? "conditional \"am__fastdepCCAS\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
-  as_fn_error "conditional \"MAINTAINER_MODE\" was never defined.
+  as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${TESTSUBDIR_TRUE}" && test -z "${TESTSUBDIR_FALSE}"; then
-  as_fn_error "conditional \"TESTSUBDIR\" was never defined.
+  as_fn_error $? "conditional \"TESTSUBDIR\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${MIPS_TRUE}" && test -z "${MIPS_FALSE}"; then
-  as_fn_error "conditional \"MIPS\" was never defined.
+  as_fn_error $? "conditional \"MIPS\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${BFIN_TRUE}" && test -z "${BFIN_FALSE}"; then
+  as_fn_error $? "conditional \"BFIN\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${SPARC_TRUE}" && test -z "${SPARC_FALSE}"; then
-  as_fn_error "conditional \"SPARC\" was never defined.
+  as_fn_error $? "conditional \"SPARC\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${X86_TRUE}" && test -z "${X86_FALSE}"; then
-  as_fn_error "conditional \"X86\" was never defined.
+  as_fn_error $? "conditional \"X86\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${X86_FREEBSD_TRUE}" && test -z "${X86_FREEBSD_FALSE}"; then
-  as_fn_error "conditional \"X86_FREEBSD\" was never defined.
+  as_fn_error $? "conditional \"X86_FREEBSD\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${X86_WIN32_TRUE}" && test -z "${X86_WIN32_FALSE}"; then
-  as_fn_error "conditional \"X86_WIN32\" was never defined.
+  as_fn_error $? "conditional \"X86_WIN32\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${X86_WIN64_TRUE}" && test -z "${X86_WIN64_FALSE}"; then
-  as_fn_error "conditional \"X86_WIN64\" was never defined.
+  as_fn_error $? "conditional \"X86_WIN64\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${X86_DARWIN_TRUE}" && test -z "${X86_DARWIN_FALSE}"; then
-  as_fn_error "conditional \"X86_DARWIN\" was never defined.
+  as_fn_error $? "conditional \"X86_DARWIN\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${ALPHA_TRUE}" && test -z "${ALPHA_FALSE}"; then
-  as_fn_error "conditional \"ALPHA\" was never defined.
+  as_fn_error $? "conditional \"ALPHA\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${IA64_TRUE}" && test -z "${IA64_FALSE}"; then
-  as_fn_error "conditional \"IA64\" was never defined.
+  as_fn_error $? "conditional \"IA64\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${M32R_TRUE}" && test -z "${M32R_FALSE}"; then
-  as_fn_error "conditional \"M32R\" was never defined.
+  as_fn_error $? "conditional \"M32R\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${M68K_TRUE}" && test -z "${M68K_FALSE}"; then
-  as_fn_error "conditional \"M68K\" was never defined.
+  as_fn_error $? "conditional \"M68K\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${MICROBLAZE_TRUE}" && test -z "${MICROBLAZE_FALSE}"; then
+  as_fn_error $? "conditional \"MICROBLAZE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${METAG_TRUE}" && test -z "${METAG_FALSE}"; then
+  as_fn_error $? "conditional \"METAG\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${MOXIE_TRUE}" && test -z "${MOXIE_FALSE}"; then
+  as_fn_error $? "conditional \"MOXIE\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${POWERPC_TRUE}" && test -z "${POWERPC_FALSE}"; then
-  as_fn_error "conditional \"POWERPC\" was never defined.
+  as_fn_error $? "conditional \"POWERPC\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${POWERPC_AIX_TRUE}" && test -z "${POWERPC_AIX_FALSE}"; then
-  as_fn_error "conditional \"POWERPC_AIX\" was never defined.
+  as_fn_error $? "conditional \"POWERPC_AIX\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${POWERPC_DARWIN_TRUE}" && test -z "${POWERPC_DARWIN_FALSE}"; then
-  as_fn_error "conditional \"POWERPC_DARWIN\" was never defined.
+  as_fn_error $? "conditional \"POWERPC_DARWIN\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${POWERPC_FREEBSD_TRUE}" && test -z "${POWERPC_FREEBSD_FALSE}"; then
-  as_fn_error "conditional \"POWERPC_FREEBSD\" was never defined.
+  as_fn_error $? "conditional \"POWERPC_FREEBSD\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${AARCH64_TRUE}" && test -z "${AARCH64_FALSE}"; then
+  as_fn_error $? "conditional \"AARCH64\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${ARM_TRUE}" && test -z "${ARM_FALSE}"; then
-  as_fn_error "conditional \"ARM\" was never defined.
+  as_fn_error $? "conditional \"ARM\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${AVR32_TRUE}" && test -z "${AVR32_FALSE}"; then
-  as_fn_error "conditional \"AVR32\" was never defined.
+  as_fn_error $? "conditional \"AVR32\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${LIBFFI_CRIS_TRUE}" && test -z "${LIBFFI_CRIS_FALSE}"; then
-  as_fn_error "conditional \"LIBFFI_CRIS\" was never defined.
+  as_fn_error $? "conditional \"LIBFFI_CRIS\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${FRV_TRUE}" && test -z "${FRV_FALSE}"; then
-  as_fn_error "conditional \"FRV\" was never defined.
+  as_fn_error $? "conditional \"FRV\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${S390_TRUE}" && test -z "${S390_FALSE}"; then
-  as_fn_error "conditional \"S390\" was never defined.
+  as_fn_error $? "conditional \"S390\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${X86_64_TRUE}" && test -z "${X86_64_FALSE}"; then
-  as_fn_error "conditional \"X86_64\" was never defined.
+  as_fn_error $? "conditional \"X86_64\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${SH_TRUE}" && test -z "${SH_FALSE}"; then
-  as_fn_error "conditional \"SH\" was never defined.
+  as_fn_error $? "conditional \"SH\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${SH64_TRUE}" && test -z "${SH64_FALSE}"; then
-  as_fn_error "conditional \"SH64\" was never defined.
+  as_fn_error $? "conditional \"SH64\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${PA_LINUX_TRUE}" && test -z "${PA_LINUX_FALSE}"; then
-  as_fn_error "conditional \"PA_LINUX\" was never defined.
+  as_fn_error $? "conditional \"PA_LINUX\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${PA_HPUX_TRUE}" && test -z "${PA_HPUX_FALSE}"; then
-  as_fn_error "conditional \"PA_HPUX\" was never defined.
+  as_fn_error $? "conditional \"PA_HPUX\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${PA64_HPUX_TRUE}" && test -z "${PA64_HPUX_FALSE}"; then
-  as_fn_error "conditional \"PA64_HPUX\" was never defined.
+  as_fn_error $? "conditional \"PA64_HPUX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${TILE_TRUE}" && test -z "${TILE_FALSE}"; then
+  as_fn_error $? "conditional \"TILE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${XTENSA_TRUE}" && test -z "${XTENSA_FALSE}"; then
+  as_fn_error $? "conditional \"XTENSA\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 
+if test -z "${FFI_EXEC_TRAMPOLINE_TABLE_TRUE}" && test -z "${FFI_EXEC_TRAMPOLINE_TABLE_FALSE}"; then
+  as_fn_error $? "conditional \"FFI_EXEC_TRAMPOLINE_TABLE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${FFI_DEBUG_TRUE}" && test -z "${FFI_DEBUG_FALSE}"; then
+  as_fn_error $? "conditional \"FFI_DEBUG\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${FFI_DEBUG_TRUE}" && test -z "${FFI_DEBUG_FALSE}"; then
+  as_fn_error $? "conditional \"FFI_DEBUG\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
 
-: ${CONFIG_STATUS=./config.status}
+: "${CONFIG_STATUS=./config.status}"
 ac_write_fail=0
 ac_clean_files_save=$ac_clean_files
 ac_clean_files="$ac_clean_files $CONFIG_STATUS"
@@ -12767,6 +15264,7 @@
 IFS=" ""	$as_nl"
 
 # Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
 case $0 in #((
   *[\\/]* ) as_myself=$0 ;;
   *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -12812,19 +15310,19 @@
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 
-# as_fn_error ERROR [LINENO LOG_FD]
-# ---------------------------------
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
 # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
 # provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with status $?, using 1 if that was 0.
+# script with STATUS, using 1 if that was 0.
 as_fn_error ()
 {
-  as_status=$?; test $as_status -eq 0 && as_status=1
-  if test "$3"; then
-    as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-    $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
   fi
-  $as_echo "$as_me: error: $1" >&2
+  $as_echo "$as_me: error: $2" >&2
   as_fn_exit $as_status
 } # as_fn_error
 
@@ -12962,16 +15460,16 @@
     # ... but there are two gotchas:
     # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
     # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -p'.
+    # In both cases, we have to default to `cp -pR'.
     ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -p'
+      as_ln_s='cp -pR'
   elif ln conf$$.file conf$$ 2>/dev/null; then
     as_ln_s=ln
   else
-    as_ln_s='cp -p'
+    as_ln_s='cp -pR'
   fi
 else
-  as_ln_s='cp -p'
+  as_ln_s='cp -pR'
 fi
 rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
 rmdir conf$$.dir 2>/dev/null
@@ -13020,7 +15518,7 @@
       test -d "$as_dir" && break
     done
     test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
 
 
 } # as_fn_mkdir_p
@@ -13031,28 +15529,16 @@
   as_mkdir_p=false
 fi
 
-if test -x / >/dev/null 2>&1; then
-  as_test_x='test -x'
-else
-  if ls -dL / >/dev/null 2>&1; then
-    as_ls_L_option=L
-  else
-    as_ls_L_option=
-  fi
-  as_test_x='
-    eval sh -c '\''
-      if test -d "$1"; then
-	test -d "$1/.";
-      else
-	case $1 in #(
-	-*)set "./$1";;
-	esac;
-	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
-	???[sx]*):;;*)false;;esac;fi
-    '\'' sh
-  '
-fi
-as_executable_p=$as_test_x
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -13073,8 +15559,8 @@
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by libffi $as_me 3.0.10rc0, which was
-generated by GNU Autoconf 2.65.  Invocation command line was
+This file was extended by libffi $as_me 3.0.13, which was
+generated by GNU Autoconf 2.69.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -13137,17 +15623,17 @@
 Configuration commands:
 $config_commands
 
-Report bugs to <http://gcc.gnu.org/bugs.html>."
+Report bugs to <http://github.com/atgreen/libffi/issues>."
 
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
-libffi config.status 3.0.10rc0
-configured by $0, generated by GNU Autoconf 2.65,
+libffi config.status 3.0.13
+configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"
 
-Copyright (C) 2009 Free Software Foundation, Inc.
+Copyright (C) 2012 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
 
@@ -13165,11 +15651,16 @@
 while test $# != 0
 do
   case $1 in
-  --*=*)
+  --*=?*)
     ac_option=`expr "X$1" : 'X\([^=]*\)='`
     ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
     ac_shift=:
     ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
   *)
     ac_option=$1
     ac_optarg=$2
@@ -13191,6 +15682,7 @@
     $ac_shift
     case $ac_optarg in
     *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
     esac
     as_fn_append CONFIG_FILES " '$ac_optarg'"
     ac_need_defaults=false;;
@@ -13203,7 +15695,7 @@
     ac_need_defaults=false;;
   --he | --h)
     # Conflict between --help and --header
-    as_fn_error "ambiguous option: \`$1'
+    as_fn_error $? "ambiguous option: \`$1'
 Try \`$0 --help' for more information.";;
   --help | --hel | -h )
     $as_echo "$ac_cs_usage"; exit ;;
@@ -13212,7 +15704,7 @@
     ac_cs_silent=: ;;
 
   # This is an error.
-  -*) as_fn_error "unrecognized option: \`$1'
+  -*) as_fn_error $? "unrecognized option: \`$1'
 Try \`$0 --help' for more information." ;;
 
   *) as_fn_append ac_config_targets " $1"
@@ -13232,7 +15724,7 @@
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 if \$ac_cs_recheck; then
-  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
   shift
   \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
   CONFIG_SHELL='$SHELL'
@@ -13256,6 +15748,14 @@
 #
 # INIT-COMMANDS
 #
+ax_enable_builddir_srcdir="$srcdir"                    # $srcdir
+ax_enable_builddir_host="$HOST"                        # $HOST / $host
+ax_enable_builddir_version="$VERSION"                  # $VERSION
+ax_enable_builddir_package="$PACKAGE"                  # $PACKAGE
+ax_enable_builddir_auxdir="$ax_enable_builddir_auxdir" # $AUX
+ax_enable_builddir_sed="$ax_enable_builddir_sed"       # $SED
+ax_enable_builddir="$ax_enable_builddir"               # $SUB
+
 AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
 
 
@@ -13266,131 +15766,154 @@
 sed_quote_subst='$sed_quote_subst'
 double_quote_subst='$double_quote_subst'
 delay_variable_subst='$delay_variable_subst'
-macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`'
-macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`'
-enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`'
-enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`'
-pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`'
-enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`'
-host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`'
-host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`'
-host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`'
-build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`'
-build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`'
-build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`'
-SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`'
-Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`'
-GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`'
-EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`'
-FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`'
-LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`'
-NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`'
-LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`'
-max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`'
-ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`'
-exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`'
-lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`'
-lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`'
-lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`'
-reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`'
-reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`'
-deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`'
-file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`'
-AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`'
-AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`'
-STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`'
-RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`'
-old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`'
-CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`'
-compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`'
-GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
-objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`'
-SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`'
-ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`'
-MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`'
-need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`'
-DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`'
-NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`'
-LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`'
-OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`'
-OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`'
-libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`'
-shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`'
-enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`'
-export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
-whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
-compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`'
-allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
-no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`'
-inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`'
-link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`'
-fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`'
-always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`'
-export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
-include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
-prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`'
-variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`'
-need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
-need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`'
-version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`'
-runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`'
-shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
-shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`'
-libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`'
-library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`'
-soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`'
-postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`'
-sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
-sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`'
-enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`'
-enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`'
-enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`'
-old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`'
-striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
 
 LTCC='$LTCC'
 LTCFLAGS='$LTCFLAGS'
 compiler='$compiler_DEFAULT'
 
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
 # Quote evaled strings.
-for var in SED \
+for var in SHELL \
+ECHO \
+PATH_SEPARATOR \
+SED \
 GREP \
 EGREP \
 FGREP \
@@ -13403,8 +15926,13 @@
 OBJDUMP \
 deplibs_check_method \
 file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+DLLTOOL \
+sharedlib_from_linklib_cmd \
 AR \
 AR_FLAGS \
+archiver_list_spec \
 STRIP \
 RANLIB \
 CC \
@@ -13414,14 +15942,14 @@
 lt_cv_sys_global_symbol_to_cdecl \
 lt_cv_sys_global_symbol_to_c_name_address \
 lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
-SHELL \
-ECHO \
+nm_file_list_spec \
 lt_prog_compiler_no_builtin_flag \
-lt_prog_compiler_wl \
 lt_prog_compiler_pic \
+lt_prog_compiler_wl \
 lt_prog_compiler_static \
 lt_cv_prog_compiler_c_o \
 need_locks \
+MANIFEST_TOOL \
 DSYMUTIL \
 NMEDIT \
 LIPO \
@@ -13435,9 +15963,7 @@
 allow_undefined_flag \
 no_undefined_flag \
 hardcode_libdir_flag_spec \
-hardcode_libdir_flag_spec_ld \
 hardcode_libdir_separator \
-fix_srcfile_path \
 exclude_expsyms \
 include_expsyms \
 file_list_spec \
@@ -13445,12 +15971,13 @@
 libname_spec \
 library_names_spec \
 soname_spec \
+install_override_mode \
 finish_eval \
 old_striplib \
 striplib; do
-    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
     *[\\\\\\\`\\"\\\$]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -13472,14 +15999,15 @@
 module_expsym_cmds \
 export_symbols_cmds \
 prelink_cmds \
+postlink_cmds \
 postinstall_cmds \
 postuninstall_cmds \
 finish_cmds \
 sys_lib_search_path_spec \
 sys_lib_dlsearch_path_spec; do
-    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
     *[\\\\\\\`\\"\\\$]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -13487,12 +16015,6 @@
     esac
 done
 
-# Fix-up fallback echo if it was mangled by the above quoting rules.
-case \$lt_ECHO in
-*'\\\$0 --fallback-echo"')  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\`
-  ;;
-esac
-
 ac_aux_dir='$ac_aux_dir'
 xsi_shell='$xsi_shell'
 lt_shell_append='$lt_shell_append'
@@ -13523,6 +16045,7 @@
 do
   case $ac_config_target in
     "fficonfig.h") CONFIG_HEADERS="$CONFIG_HEADERS fficonfig.h" ;;
+    "buildir") CONFIG_COMMANDS="$CONFIG_COMMANDS buildir" ;;
     "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
     "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
     "include") CONFIG_COMMANDS="$CONFIG_COMMANDS include" ;;
@@ -13537,7 +16060,7 @@
     "include/ffi_common.h") CONFIG_LINKS="$CONFIG_LINKS include/ffi_common.h:include/ffi_common.h" ;;
     "fficonfig.py") CONFIG_FILES="$CONFIG_FILES fficonfig.py" ;;
 
-  *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
   esac
 done
 
@@ -13561,9 +16084,10 @@
 # after its creation but before its name has been assigned to `$tmp'.
 $debug ||
 {
-  tmp=
+  tmp= ac_tmp=
   trap 'exit_status=$?
-  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+  : "${ac_tmp:=$tmp}"
+  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
 ' 0
   trap 'as_fn_exit 1' 1 2 13 15
 }
@@ -13571,12 +16095,13 @@
 
 {
   tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
-  test -n "$tmp" && test -d "$tmp"
+  test -d "$tmp"
 }  ||
 {
   tmp=./conf$$-$RANDOM
   (umask 077 && mkdir "$tmp")
-} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
 
 # Set up the scripts for CONFIG_FILES section.
 # No need to generate them if there are no CONFIG_FILES.
@@ -13593,12 +16118,12 @@
 fi
 ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
 if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
-  ac_cs_awk_cr='\r'
+  ac_cs_awk_cr='\\r'
 else
   ac_cs_awk_cr=$ac_cr
 fi
 
-echo 'BEGIN {' >"$tmp/subs1.awk" &&
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
 _ACEOF
 
 
@@ -13607,18 +16132,18 @@
   echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
   echo "_ACEOF"
 } >conf$$subs.sh ||
-  as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
 ac_delim='%!_!# '
 for ac_last_try in false false false false false :; do
   . ./conf$$subs.sh ||
-    as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
 
   ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
   if test $ac_delim_n = $ac_delim_num; then
     break
   elif $ac_last_try; then
-    as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
   else
     ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
   fi
@@ -13626,7 +16151,7 @@
 rm -f conf$$subs.sh
 
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
 _ACEOF
 sed -n '
 h
@@ -13674,7 +16199,7 @@
 rm -f conf$$subs.awk
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 _ACAWK
-cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
   for (key in S) S_is_set[key] = 1
   FS = ""
 
@@ -13706,21 +16231,29 @@
   sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
 else
   cat
-fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
-  || as_fn_error "could not setup config files machinery" "$LINENO" 5
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
 _ACEOF
 
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
 # trailing colons and then remove the whole line if VPATH becomes empty
 # (actually we leave an empty line to preserve line numbers).
 if test "x$srcdir" = x.; then
-  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
-s/:*\$(srcdir):*/:/
-s/:*\${srcdir}:*/:/
-s/:*@srcdir@:*/:/
-s/^\([^=]*=[	 ]*\):*/\1/
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
+h
+s///
+s/^/:/
+s/[	 ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
 s/:*$//
+x
+s/\(=[	 ]*\).*/\1/
+G
+s/\n//
 s/^[^=]*=[	 ]*$//
 }'
 fi
@@ -13732,7 +16265,7 @@
 # No need to generate them if there are no CONFIG_HEADERS.
 # This happens for instance with `./config.status Makefile'.
 if test -n "$CONFIG_HEADERS"; then
-cat >"$tmp/defines.awk" <<\_ACAWK ||
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
 BEGIN {
 _ACEOF
 
@@ -13744,11 +16277,11 @@
 # handling of long lines.
 ac_delim='%!_!# '
 for ac_last_try in false false :; do
-  ac_t=`sed -n "/$ac_delim/p" confdefs.h`
-  if test -z "$ac_t"; then
+  ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+  if test -z "$ac_tt"; then
     break
   elif $ac_last_try; then
-    as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5
+    as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
   else
     ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
   fi
@@ -13833,7 +16366,7 @@
 _ACAWK
 _ACEOF
 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-  as_fn_error "could not setup config headers machinery" "$LINENO" 5
+  as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
 fi # test -n "$CONFIG_HEADERS"
 
 
@@ -13846,7 +16379,7 @@
   esac
   case $ac_mode$ac_tag in
   :[FHL]*:*);;
-  :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
   :[FH]-) ac_tag=-:-;;
   :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
   esac
@@ -13865,7 +16398,7 @@
     for ac_f
     do
       case $ac_f in
-      -) ac_f="$tmp/stdin";;
+      -) ac_f="$ac_tmp/stdin";;
       *) # Look for the file first in the build tree, then in the source tree
 	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
 	 # because $ac_f cannot contain `:'.
@@ -13874,7 +16407,7 @@
 	   [\\/$]*) false;;
 	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
 	   esac ||
-	   as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
       esac
       case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
       as_fn_append ac_file_inputs " '$ac_f'"
@@ -13900,8 +16433,8 @@
     esac
 
     case $ac_tag in
-    *:-:* | *:-) cat >"$tmp/stdin" \
-      || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
+    *:-:* | *:-) cat >"$ac_tmp/stdin" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
     esac
     ;;
   esac
@@ -14037,23 +16570,24 @@
 s&@MKDIR_P@&$ac_MKDIR_P&;t t
 $ac_datarootdir_hack
 "
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
-  || as_fn_error "could not create $ac_file" "$LINENO" 5
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
 
 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
-  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
-  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
+      "$ac_tmp/out"`; test -z "$ac_out"; } &&
   { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined." >&5
+which seems to be undefined.  Please make sure it is defined" >&5
 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined." >&2;}
+which seems to be undefined.  Please make sure it is defined" >&2;}
 
-  rm -f "$tmp/stdin"
+  rm -f "$ac_tmp/stdin"
   case $ac_file in
-  -) cat "$tmp/out" && rm -f "$tmp/out";;
-  *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
   esac \
-  || as_fn_error "could not create $ac_file" "$LINENO" 5
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
  ;;
   :H)
   #
@@ -14062,21 +16596,21 @@
   if test x"$ac_file" != x-; then
     {
       $as_echo "/* $configure_input  */" \
-      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
-    } >"$tmp/config.h" \
-      || as_fn_error "could not create $ac_file" "$LINENO" 5
-    if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+    } >"$ac_tmp/config.h" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
       { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
 $as_echo "$as_me: $ac_file is unchanged" >&6;}
     else
       rm -f "$ac_file"
-      mv "$tmp/config.h" "$ac_file" \
-	|| as_fn_error "could not create $ac_file" "$LINENO" 5
+      mv "$ac_tmp/config.h" "$ac_file" \
+	|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
     fi
   else
     $as_echo "/* $configure_input  */" \
-      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
-      || as_fn_error "could not create -" "$LINENO" 5
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+      || as_fn_error $? "could not create -" "$LINENO" 5
   fi
 # Compute "$ac_file"'s index in $config_headers.
 _am_arg="$ac_file"
@@ -14130,19 +16664,19 @@
 $as_echo "$as_me: linking $ac_source to $ac_file" >&6;}
 
     if test ! -r "$ac_source"; then
-      as_fn_error "$ac_source: file not found" "$LINENO" 5
+      as_fn_error $? "$ac_source: file not found" "$LINENO" 5
     fi
     rm -f "$ac_file"
 
     # Try a relative symlink, then a hard link, then a copy.
-    case $srcdir in
+    case $ac_source in
     [\\/$]* | ?:[\\/]* ) ac_rel_source=$ac_source ;;
 	*) ac_rel_source=$ac_top_build_prefix$ac_source ;;
     esac
     ln -s "$ac_rel_source" "$ac_file" 2>/dev/null ||
       ln "$ac_source" "$ac_file" 2>/dev/null ||
       cp -p "$ac_source" "$ac_file" ||
-      as_fn_error "cannot link or copy $ac_source to $ac_file" "$LINENO" 5
+      as_fn_error $? "cannot link or copy $ac_source to $ac_file" "$LINENO" 5
   fi
  ;;
   :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
@@ -14152,6 +16686,150 @@
 
 
   case $ac_file$ac_mode in
+    "buildir":C)   ac_top_srcdir="$ax_enable_builddir_srcdir"
+  if test ".$ax_enable_builddir" = ".." ; then
+    if test -f "$top_srcdir/Makefile" ; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: skipping top_srcdir/Makefile - left untouched" >&5
+$as_echo "$as_me: skipping top_srcdir/Makefile - left untouched" >&6;}
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: skipping top_srcdir/Makefile - not created" >&5
+$as_echo "$as_me: skipping top_srcdir/Makefile - not created" >&6;}
+    fi
+  else
+    if test -f "$ac_top_srcdir/Makefile" ; then
+      a=`grep "^VERSION " "$ac_top_srcdir/Makefile"` ; b=`grep "^VERSION " Makefile`
+      test "$a" != "$b" && rm "$ac_top_srcdir/Makefile"
+    fi
+    if test -f "$ac_top_srcdir/Makefile" ; then
+	echo "$ac_top_srcdir/Makefile : $ac_top_srcdir/Makefile.in" > $tmp/conftemp.mk
+	echo "	@ echo 'REMOVED,,,' >\$@" >> $tmp/conftemp.mk
+      eval "${MAKE-make} -f $tmp/conftemp.mk 2>/dev/null >/dev/null"
+      if grep '^REMOVED,,,' "$ac_top_srcdir/Makefile" >/dev/null
+      then rm $ac_top_srcdir/Makefile ; fi
+      cp $tmp/conftemp.mk $ac_top_srcdir/makefiles.mk~      ## DEBUGGING
+    fi
+    if test ! -f "$ac_top_srcdir/Makefile" ; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: create top_srcdir/Makefile guessed from local Makefile" >&5
+$as_echo "$as_me: create top_srcdir/Makefile guessed from local Makefile" >&6;}
+      x='`' ; cat >$tmp/conftemp.sed <<_EOF
+/^\$/n
+x
+/^\$/bS
+x
+/\\\\\$/{H;d;}
+{H;s/.*//;x;}
+bM
+:S
+x
+/\\\\\$/{h;d;}
+{h;s/.*//;x;}
+:M
+s/\\(\\n\\)	/\\1 /g
+/^	/d
+/^[	 ]*[\\#]/d
+/^VPATH *=/d
+s/^srcdir *=.*/srcdir = ./
+s/^top_srcdir *=.*/top_srcdir = ./
+/[:=]/!d
+/^\\./d
+/ = /b
+/ .= /b
+/:/!b
+s/:.*/:/
+s/ /  /g
+s/ \\([a-z][a-z-]*[a-zA-Z0-9]\\)\\([ :]\\)/ \\1 \\1-all\\2/g
+s/^\\([a-z][a-z-]*[a-zA-Z0-9]\\)\\([ :]\\)/\\1 \\1-all\\2/
+s/  / /g
+/^all all-all[ :]/i\\
+all-configured : all-all
+s/ [a-zA-Z0-9-]*-all [a-zA-Z0-9-]*-all-all//g
+/-all-all/d
+a\\
+	@ HOST="\$(HOST)\" \\\\\\
+	; test ".\$\$HOST" = "." && HOST=$x sh $ax_enable_builddir_auxdir/config.guess $x \\\\\\
+	; BUILD=$x grep "^#### \$\$HOST " Makefile | sed -e 's/.*|//' $x \\\\\\
+	; use=$x basename "\$\@" -all $x; n=$x echo \$\$BUILD | wc -w $x \\\\\\
+	; echo "MAKE \$\$HOST : \$\$n * \$\@"; if test "\$\$n" -eq "0" ; then : \\\\\\
+	; BUILD=$x grep "^####.*|" Makefile |tail -1| sed -e 's/.*|//' $x ; fi \\\\\\
+	; test ".\$\$BUILD" = "." && BUILD="." \\\\\\
+	; test "\$\$use" = "\$\@" && BUILD=$x echo "\$\$BUILD" | tail -1 $x \\\\\\
+	; for i in \$\$BUILD ; do test ".\$\$i" = "." && continue \\\\\\
+	; (cd "\$\$i" && test ! -f configure && \$(MAKE) \$\$use) || exit; done
+/dist-all *:/a\\
+	@ HOST="\$(HOST)\" \\\\\\
+	; test ".\$\$HOST" = "." && HOST=$x sh $ax_enable_builddir_auxdir/config.guess $x \\\\\\
+	; BUILD=$x grep "^#### \$\$HOST " Makefile | sed -e 's/.*|//' $x \\\\\\
+	; found=$x echo \$\$BUILD | wc -w $x \\\\\\
+	; echo "MAKE \$\$HOST : \$\$found \$(PACKAGE)-\$(VERSION).tar.*" \\\\\\
+	; if test "\$\$found" -eq "0" ; then : \\\\\\
+	; BUILD=$x grep "^#### .*|" Makefile |tail -1| sed -e 's/.*|//' $x \\\\\\
+	; fi ; for i in \$\$BUILD ; do test ".\$\$i" = "." && continue \\\\\\
+	; for f in \$\$i/\$(PACKAGE)-\$(VERSION).tar.* \\\\\\
+	; do test -f "\$\$f" && mv "\$\$f" \$(PUB). ; done ; break ; done
+/dist-[a-zA-Z0-9]*-all *:/a\\
+	@ HOST="\$(HOST)\" \\\\\\
+	; test ".\$\$HOST" = "." && HOST=$x sh ./config.guess $x \\\\\\
+	; BUILD=$x grep "^#### \$\$HOST " Makefile | sed -e 's/.*|//' $x \\\\\\
+	; found=$x echo \$\$BUILD | wc -w $x \\\\\\
+	; echo "MAKE \$\$HOST : \$\$found \$(PACKAGE)-\$(VERSION).*" \\\\\\
+	; if test "\$\$found" -eq "0" ; then : \\\\\\
+	; BUILD=$x grep "^#### .*|" Makefile |tail -1| sed -e 's/.*|//' $x \\\\\\
+	; fi ; for i in \$\$BUILD ; do test ".\$\$i" = "." && continue \\\\\\
+	; for f in \$\$i/\$(PACKAGE)-\$(VERSION).* \\\\\\
+	; do test -f "\$\$f" && mv "\$\$f" \$(PUB). ; done ; break ; done
+/distclean-all *:/a\\
+	@ HOST="\$(HOST)\" \\\\\\
+	; test ".\$\$HOST" = "." && HOST=$x sh $ax_enable_builddir_auxdir/config.guess $x \\\\\\
+	; BUILD=$x grep "^#### .*|" Makefile | sed -e 's/.*|//' $x \\\\\\
+	; use=$x basename "\$\@" -all $x; n=$x echo \$\$BUILD | wc -w $x \\\\\\
+	; echo "MAKE \$\$HOST : \$\$n * \$\@ (all local builds)" \\\\\\
+	; test ".\$\$BUILD" = "." && BUILD="." \\\\\\
+	; for i in \$\$BUILD ; do test ".\$\$i" = "." && continue \\\\\\
+	; echo "# rm -r \$\$i"; done ; echo "# (sleep 3)" ; sleep 3 \\\\\\
+	; for i in \$\$BUILD ; do test ".\$\$i" = "." && continue \\\\\\
+	; echo "\$\$i" | grep "^/" > /dev/null && continue \\\\\\
+	; echo "\$\$i" | grep "^../" > /dev/null && continue \\\\\\
+	; echo "rm -r \$\$i"; (rm -r "\$\$i") ; done ; rm Makefile
+_EOF
+      cp "$tmp/conftemp.sed" "$ac_top_srcdir/makefile.sed~"            ## DEBUGGING
+      $ax_enable_builddir_sed -f $tmp/conftemp.sed Makefile >$ac_top_srcdir/Makefile
+      if test -f "$ac_top_srcdir/Makefile.mk" ; then
+        { $as_echo "$as_me:${as_lineno-$LINENO}: extend top_srcdir/Makefile with top_srcdir/Makefile.mk" >&5
+$as_echo "$as_me: extend top_srcdir/Makefile with top_srcdir/Makefile.mk" >&6;}
+        cat $ac_top_srcdir/Makefile.mk >>$ac_top_srcdir/Makefile
+      fi ; xxxx="####"
+      echo "$xxxx CONFIGURATIONS FOR TOPLEVEL MAKEFILE: " >>$ac_top_srcdir/Makefile
+      # sanity check
+      if grep '^; echo "MAKE ' $ac_top_srcdir/Makefile >/dev/null ; then
+        { $as_echo "$as_me:${as_lineno-$LINENO}: buggy sed found - it deletes tab in \"a\" text parts" >&5
+$as_echo "$as_me: buggy sed found - it deletes tab in \"a\" text parts" >&6;}
+        $ax_enable_builddir_sed -e '/^@ HOST=/s/^/	/' -e '/^; /s/^/	/' $ac_top_srcdir/Makefile \
+          >$ac_top_srcdir/Makefile~
+        (test -s $ac_top_srcdir/Makefile~ && mv $ac_top_srcdir/Makefile~ $ac_top_srcdir/Makefile) 2>/dev/null
+      fi
+    else
+      xxxx="\\#\\#\\#\\#"
+      # echo "/^$xxxx *$ax_enable_builddir_host /d" >$tmp/conftemp.sed
+      echo "s!^$xxxx [^|]* | *$ax_enable_builddir *\$!$xxxx ...... $ax_enable_builddir!" >$tmp/conftemp.sed
+      $ax_enable_builddir_sed -f "$tmp/conftemp.sed" "$ac_top_srcdir/Makefile" >$tmp/mkfile.tmp
+        cp "$tmp/conftemp.sed" "$ac_top_srcdir/makefiles.sed~"         ## DEBUGGING
+        cp "$tmp/mkfile.tmp"   "$ac_top_srcdir/makefiles.out~"         ## DEBUGGING
+      if cmp -s "$ac_top_srcdir/Makefile" "$tmp/mkfile.tmp" 2>/dev/null ; then
+        { $as_echo "$as_me:${as_lineno-$LINENO}: keeping top_srcdir/Makefile from earlier configure" >&5
+$as_echo "$as_me: keeping top_srcdir/Makefile from earlier configure" >&6;}
+        rm "$tmp/mkfile.tmp"
+      else
+        { $as_echo "$as_me:${as_lineno-$LINENO}: reusing top_srcdir/Makefile from earlier configure" >&5
+$as_echo "$as_me: reusing top_srcdir/Makefile from earlier configure" >&6;}
+        mv "$tmp/mkfile.tmp" "$ac_top_srcdir/Makefile"
+      fi
+    fi
+    { $as_echo "$as_me:${as_lineno-$LINENO}: build in $ax_enable_builddir (HOST=$ax_enable_builddir_host)" >&5
+$as_echo "$as_me: build in $ax_enable_builddir (HOST=$ax_enable_builddir_host)" >&6;}
+    xxxx="####"
+    echo "$xxxx" "$ax_enable_builddir_host" "|$ax_enable_builddir" >>$ac_top_srcdir/Makefile
+  fi
+ ;;
     "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
   # Autoconf 2.62 quotes --file arguments for eval, but not when files
   # are listed without --file.  Let's play safe and only enable the eval
@@ -14166,7 +16844,7 @@
     # Strip MF so we end up with the name of the file.
     mf=`echo "$mf" | sed -e 's/:.*$//'`
     # Check whether this is an Automake generated Makefile or not.
-    # We used to match only the files named `Makefile.in', but
+    # We used to match only the files named 'Makefile.in', but
     # some people rename them; so instead we look at the file content.
     # Grep'ing the first line is not enough: some people post-process
     # each Makefile.in and add a new line on top of each file to say so.
@@ -14200,21 +16878,19 @@
       continue
     fi
     # Extract the definition of DEPDIR, am__include, and am__quote
-    # from the Makefile without running `make'.
+    # from the Makefile without running 'make'.
     DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
     test -z "$DEPDIR" && continue
     am__include=`sed -n 's/^am__include = //p' < "$mf"`
     test -z "am__include" && continue
     am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-    # When using ansi2knr, U may be empty or an underscore; expand it
-    U=`sed -n 's/^U = //p' < "$mf"`
     # Find all dependency output files, they are included files with
     # $(DEPDIR) in their names.  We invoke sed twice because it is the
     # simplest approach to changing $(DEPDIR) to its actual value in the
     # expansion.
     for file in `sed -n "
       s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
       # Make sure the directory exists.
       test -f "$dirpart/$file" && continue
       fdir=`$as_dirname -- "$file" ||
@@ -14268,7 +16944,8 @@
 # NOTE: Changes made to this file will be lost: look at ltmain.sh.
 #
 #   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008 Free Software Foundation, Inc.
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
 #   Written by Gordon Matzigkeit, 1996
 #
 #   This file is part of GNU Libtool.
@@ -14316,6 +16993,15 @@
 # Whether or not to optimize for fast installation.
 fast_install=$enable_fast_install
 
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=$lt_PATH_SEPARATOR
+
 # The host system.
 host_alias=$host_alias
 host=$host
@@ -14365,9 +17051,11 @@
 # turn newlines into spaces.
 NL2SP=$lt_lt_NL2SP
 
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
 
 # An object symbol dumper.
 OBJDUMP=$lt_OBJDUMP
@@ -14375,13 +17063,30 @@
 # Method to check whether dependent libraries are shared objects.
 deplibs_check_method=$lt_deplibs_check_method
 
-# Command to use when deplibs_check_method == "file_magic".
+# Command to use when deplibs_check_method = "file_magic".
 file_magic_cmd=$lt_file_magic_cmd
 
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
 # The archiver.
 AR=$lt_AR
+
+# Flags to create an archive.
 AR_FLAGS=$lt_AR_FLAGS
 
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
 # A symbol stripping program.
 STRIP=$lt_STRIP
 
@@ -14390,6 +17095,9 @@
 old_postinstall_cmds=$lt_old_postinstall_cmds
 old_postuninstall_cmds=$lt_old_postuninstall_cmds
 
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
 # A C compiler.
 LTCC=$lt_CC
 
@@ -14408,21 +17116,24 @@
 # Transform the output of nm in a C name address pair when lib prefix is needed.
 global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
 
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and in which our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
 # The name of the directory that contains temporary libtool files.
 objdir=$objdir
 
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# An echo program that does not interpret backslashes.
-ECHO=$lt_ECHO
-
 # Used to examine libraries when file_magic_cmd begins with "file".
 MAGIC_CMD=$MAGIC_CMD
 
 # Must we lock files when doing compilation?
 need_locks=$lt_need_locks
 
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
 # Tool to manipulate archived DWARF debug symbol files on Mac OS X.
 DSYMUTIL=$lt_DSYMUTIL
 
@@ -14479,6 +17190,9 @@
 # The coded name of the library, if different from the real name.
 soname_spec=$lt_soname_spec
 
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
 # Command to use after installation of a shared archive.
 postinstall_cmds=$lt_postinstall_cmds
 
@@ -14518,6 +17232,10 @@
 # The linker used to build libraries.
 LD=$lt_LD
 
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
 # Commands used to build an old-style archive.
 old_archive_cmds=$lt_old_archive_cmds
 
@@ -14530,12 +17248,12 @@
 # Compiler flag to turn off builtin functions.
 no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
 
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl
-
 # Additional compiler flags for building library objects.
 pic_flag=$lt_lt_prog_compiler_pic
 
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
 # Compiler flag to prevent dynamic linking.
 link_static_flag=$lt_lt_prog_compiler_static
 
@@ -14585,10 +17303,6 @@
 # This must work even if \$libdir does not exist
 hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
 
-# If ld is used when linking, flag to hardcode \$libdir into a binary
-# during linking.  This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
-
 # Whether we need a single "-rpath" flag with a separated argument.
 hardcode_libdir_separator=$lt_hardcode_libdir_separator
 
@@ -14622,9 +17336,6 @@
 # Whether libtool must link a program against all its dependency libraries.
 link_all_deplibs=$link_all_deplibs
 
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
 # Set to "yes" if exported symbols are required.
 always_export_symbols=$always_export_symbols
 
@@ -14640,6 +17351,9 @@
 # Commands necessary for linking programs (against libraries) with templates.
 prelink_cmds=$lt_prelink_cmds
 
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
 # Specify filename containing input files.
 file_list_spec=$lt_file_list_spec
 
@@ -14672,212 +17386,169 @@
   # if finds mixed CR/LF and LF-only lines.  Since sed operates in
   # text mode, it properly converts lines to CR/LF.  This bash problem
   # is reportedly fixed, but why not run on old versions too?
-  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
-    || (rm -f "$cfgfile"; exit 1)
+  sed '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
 
-  case $xsi_shell in
-  yes)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-  case ${1} in
-    */*) func_dirname_result="${1%/*}${2}" ;;
-    *  ) func_dirname_result="${3}" ;;
-  esac
-}
-
-# func_basename file
-func_basename ()
-{
-  func_basename_result="${1##*/}"
-}
-
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-#   dirname:  Compute the dirname of FILE.  If nonempty,
-#             add APPEND to the result, otherwise set result
-#             to NONDIR_REPLACEMENT.
-#             value returned in "$func_dirname_result"
-#   basename: Compute filename of FILE.
-#             value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
-  case ${1} in
-    */*) func_dirname_result="${1%/*}${2}" ;;
-    *  ) func_dirname_result="${3}" ;;
-  esac
-  func_basename_result="${1##*/}"
-}
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-func_stripname ()
-{
-  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
-  # positional parameters, so assign one to ordinary parameter first.
-  func_stripname_result=${3}
-  func_stripname_result=${func_stripname_result#"${1}"}
-  func_stripname_result=${func_stripname_result%"${2}"}
-}
-
-# func_opt_split
-func_opt_split ()
-{
-  func_opt_split_opt=${1%%=*}
-  func_opt_split_arg=${1#*=}
-}
-
-# func_lo2o object
-func_lo2o ()
-{
-  case ${1} in
-    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
-    *)    func_lo2o_result=${1} ;;
-  esac
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
-  func_xform_result=${1%.*}.lo
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
-  func_arith_result=$(( $* ))
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-  func_len_result=${#1}
-}
-
-_LT_EOF
-    ;;
-  *) # Bourne compatible functions.
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-  # Extract subdirectory from the argument.
-  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
-  if test "X$func_dirname_result" = "X${1}"; then
-    func_dirname_result="${3}"
-  else
-    func_dirname_result="$func_dirname_result${2}"
-  fi
-}
-
-# func_basename file
-func_basename ()
-{
-  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
-}
+  if test x"$xsi_shell" = xyes; then
+  sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
+func_dirname ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
 
 
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
-  case ${2} in
-    .*) func_stripname_result=`$ECHO "X${3}" \
-           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
-    *)  func_stripname_result=`$ECHO "X${3}" \
-           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
-  esac
-}
-
-# sed scripts:
-my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
-my_sed_long_arg='1s/^-[^=]*=//'
-
-# func_opt_split
-func_opt_split ()
-{
-  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
-  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
-}
-
-# func_lo2o object
-func_lo2o ()
-{
-  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
-  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'`
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
-  func_arith_result=`expr "$@"`
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-  func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
-}
-
-_LT_EOF
-esac
-
-case $lt_shell_append in
-  yes)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-  eval "$1+=\$2"
-}
-_LT_EOF
-    ;;
-  *)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-  eval "$1=\$$1\$2"
-}
-
-_LT_EOF
-    ;;
-  esac
+  sed -e '/^func_basename ()$/,/^} # func_basename /c\
+func_basename ()\
+{\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
 
 
-  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
-    || (rm -f "$cfgfile"; exit 1)
+  sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
+func_dirname_and_basename ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
 
-  mv -f "$cfgfile" "$ofile" ||
+
+  sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
+func_stripname ()\
+{\
+\    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
+\    # positional parameters, so assign one to ordinary parameter first.\
+\    func_stripname_result=${3}\
+\    func_stripname_result=${func_stripname_result#"${1}"}\
+\    func_stripname_result=${func_stripname_result%"${2}"}\
+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
+func_split_long_opt ()\
+{\
+\    func_split_long_opt_name=${1%%=*}\
+\    func_split_long_opt_arg=${1#*=}\
+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
+func_split_short_opt ()\
+{\
+\    func_split_short_opt_arg=${1#??}\
+\    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
+func_lo2o ()\
+{\
+\    case ${1} in\
+\      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
+\      *)    func_lo2o_result=${1} ;;\
+\    esac\
+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_xform ()$/,/^} # func_xform /c\
+func_xform ()\
+{\
+    func_xform_result=${1%.*}.lo\
+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_arith ()$/,/^} # func_arith /c\
+func_arith ()\
+{\
+    func_arith_result=$(( $* ))\
+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_len ()$/,/^} # func_len /c\
+func_len ()\
+{\
+    func_len_result=${#1}\
+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+fi
+
+if test x"$lt_shell_append" = xyes; then
+  sed -e '/^func_append ()$/,/^} # func_append /c\
+func_append ()\
+{\
+    eval "${1}+=\\${2}"\
+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
+func_append_quoted ()\
+{\
+\    func_quote_for_eval "${2}"\
+\    eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  # Save a `func_append' function call where possible by direct use of '+='
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+else
+  # Save a `func_append' function call even when '+=' is not available
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
+fi
+
+
+   mv -f "$cfgfile" "$ofile" ||
     (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
   chmod +x "$ofile"
 
@@ -14897,7 +17568,7 @@
 ac_clean_files=$ac_clean_files_save
 
 test $ac_write_fail = 0 ||
-  as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
+  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
 
 
 # configure is writing to config.log, and then calls config.status.
@@ -14918,7 +17589,7 @@
   exec 5>>config.log
   # Use ||, not &&, to avoid exiting from the if with $? = 1, which
   # would make configure fail if this is the last instruction.
-  $ac_cs_success || as_fn_exit $?
+  $ac_cs_success || as_fn_exit 1
 fi
 if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
diff --git a/Modules/_ctypes/libffi/configure.ac b/Modules/_ctypes/libffi/configure.ac
index d21f5e7..7fe5ff5 100644
--- a/Modules/_ctypes/libffi/configure.ac
+++ b/Modules/_ctypes/libffi/configure.ac
@@ -1,11 +1,11 @@
 dnl Process this with autoconf to create configure
 #
-# file from libffi - slightly patched for ctypes
+# file from libffi - slightly patched for Python's ctypes
 #
 
-AC_PREREQ(2.63)
+AC_PREREQ(2.68)
 
-AC_INIT([libffi], [3.0.10rc0], [http://gcc.gnu.org/bugs.html])
+AC_INIT([libffi], [3.0.13], [http://github.com/atgreen/libffi/issues])
 AC_CONFIG_HEADERS([fficonfig.h])
 
 AC_CANONICAL_SYSTEM
@@ -13,18 +13,24 @@
 
 . ${srcdir}/configure.host
 
+AX_ENABLE_BUILDDIR
+
 AM_INIT_AUTOMAKE
 
 # The same as in boehm-gc and libstdc++. Have to borrow it from there.
 # We must force CC to /not/ be precious variables; otherwise
 # the wrong, non-multilib-adjusted value will be used in multilibs.
 # As a side effect, we have to subst CFLAGS ourselves.
+# Also save and restore CFLAGS, since AC_PROG_CC will come up with
+# defaults of its own if none are provided.
 
 m4_rename([_AC_ARG_VAR_PRECIOUS],[real_PRECIOUS])
 m4_define([_AC_ARG_VAR_PRECIOUS],[])
+save_CFLAGS=$CFLAGS
 AC_PROG_CC
+CFLAGS=$save_CFLAGS
 m4_undefine([_AC_ARG_VAR_PRECIOUS])
-m4_rename([real_PRECIOUS],[_AC_ARG_VAR_PRECIOUS])
+m4_rename_force([real_PRECIOUS],[_AC_ARG_VAR_PRECIOUS])
 
 AC_SUBST(CFLAGS)
 
@@ -33,6 +39,26 @@
 AC_PROG_LIBTOOL
 AC_CONFIG_MACRO_DIR([m4])
 
+# Test for 64-bit build.
+AC_CHECK_SIZEOF([size_t])
+
+AX_COMPILER_VENDOR
+AX_CC_MAXOPT
+# The AX_CFLAGS_WARN_ALL macro doesn't currently work for sunpro
+# compiler.
+if test "$ax_cv_c_compiler_vendor" != "sun"; then
+  AX_CFLAGS_WARN_ALL
+fi
+
+if test "x$GCC" = "xyes"; then
+  CFLAGS="$CFLAGS -fexceptions"
+  touch local.exp
+else
+  cat > local.exp <<EOF
+set CC_FOR_TARGET "$CC"
+EOF
+fi
+
 AM_MAINTAINER_MODE
 
 AC_CHECK_HEADERS(sys/mman.h)
@@ -44,9 +70,13 @@
 
 TARGETDIR="unknown"
 case "$host" in
+  aarch64*-*-*)
+	TARGET=AARCH64; TARGETDIR=aarch64
+	;;
+
   alpha*-*-*)
 	TARGET=ALPHA; TARGETDIR=alpha;
-	# Support 128-bit long double, changable via command-line switch.
+	# Support 128-bit long double, changeable via command-line switch.
 	HAVE_LONG_DOUBLE='defined(__LONG_DOUBLE_128__)'
 	;;
 
@@ -60,12 +90,20 @@
 
   amd64-*-freebsd*)
 	TARGET=X86_64; TARGETDIR=x86
+  	;;
+
+  amd64-*-freebsd*)
+	TARGET=X86_64; TARGETDIR=x86
 	;;
 
   avr32*-*-*)
 	TARGET=AVR32; TARGETDIR=avr32
 	;;
 
+  bfin*)
+  	TARGET=BFIN; TARGETDIR=bfin
+  	;;
+
   cris-*-*)
 	TARGET=LIBFFI_CRIS; TARGETDIR=cris
 	;;
@@ -74,7 +112,7 @@
 	TARGET=FRV; TARGETDIR=frv
 	;;
 
-  hppa*-*-linux* | parisc*-*-linux*)
+  hppa*-*-linux* | parisc*-*-linux* | hppa*-*-openbsd*)
 	TARGET=PA_LINUX; TARGETDIR=pa
 	;;
   hppa*64-*-hpux*)
@@ -87,22 +125,65 @@
   i?86-*-freebsd* | i?86-*-openbsd*)
 	TARGET=X86_FREEBSD; TARGETDIR=x86
 	;;
-  i?86-win32* | i?86-*-cygwin* | i?86-*-mingw*)
+  i?86-win32* | i?86-*-cygwin* | i?86-*-mingw* | i?86-*-os2* | i?86-*-interix*)
 	TARGET=X86_WIN32; TARGETDIR=x86
-	# All mingw/cygwin/win32 builds require this for sharedlib
-	AM_LTLDFLAGS="-no-undefined"
+	# All mingw/cygwin/win32 builds require -no-undefined for sharedlib.
+	# We must also check with_cross_host to decide if this is a native
+	# or cross-build and select where to install dlls appropriately.
+	if test -n "$with_cross_host" &&
+	   test x"$with_cross_host" != x"no"; then
+	  AM_LTLDFLAGS='-no-undefined -bindir "$(toolexeclibdir)"';
+	else
+	  AM_LTLDFLAGS='-no-undefined -bindir "$(bindir)"';
+	fi
 	;;
   i?86-*-darwin*)
 	TARGET=X86_DARWIN; TARGETDIR=x86
 	;;
   i?86-*-solaris2.1[[0-9]]*)
-	TARGET=X86_64; TARGETDIR=x86
+	TARGETDIR=x86
+	if test $ac_cv_sizeof_size_t = 4; then
+	  TARGET=X86; 
+	else
+	  TARGET=X86_64; 
+	fi	  
 	;;
+
   i*86-*-nto-qnx*) 
         TARGET=X86; TARGETDIR=x86
         ;;
-  i?86-*-*)
-	TARGET=X86; TARGETDIR=x86
+
+  x86_64-*-darwin*)
+	TARGET=X86_DARWIN; TARGETDIR=x86
+	;;
+
+  x86_64-*-cygwin* | x86_64-*-mingw*)
+	TARGET=X86_WIN64; TARGETDIR=x86
+	# All mingw/cygwin/win32 builds require -no-undefined for sharedlib.
+	# We must also check with_cross_host to decide if this is a native
+	# or cross-build and select where to install dlls appropriately.
+	if test -n "$with_cross_host" &&
+	   test x"$with_cross_host" != x"no"; then
+	  AM_LTLDFLAGS='-no-undefined -bindir "$(toolexeclibdir)"';
+	else
+	  AM_LTLDFLAGS='-no-undefined -bindir "$(bindir)"';
+	fi
+	;;
+
+  i?86-*-* | x86_64-*-*)
+	TARGETDIR=x86
+	if test $ac_cv_sizeof_size_t = 4; then
+	  case "$host" in
+	    *-gnux32)
+	      TARGET=X86_64
+	      ;;
+	    *)
+	      TARGET=X86
+	      ;;
+          esac	
+	else
+	  TARGET=X86_64; 
+	fi	  
 	;;
 
   ia64*-*-*)
@@ -117,10 +198,22 @@
 	TARGET=M68K; TARGETDIR=m68k
 	;;
 
-  mips-sgi-irix5.* | mips-sgi-irix6.*)
+  microblaze*-*-*)
+	TARGET=MICROBLAZE; TARGETDIR=microblaze
+	;;
+
+  moxie-*-*)
+	TARGET=MOXIE; TARGETDIR=moxie
+	;;
+
+  metag-*-*)
+	TARGET=METAG; TARGETDIR=metag
+	;;
+
+  mips-sgi-irix5.* | mips-sgi-irix6.* | mips*-*-rtems*)
 	TARGET=MIPS_IRIX; TARGETDIR=mips
 	;;
-  mips*-*-linux*)
+  mips*-*-linux* | mips*-*-openbsd*)
 	# Support 128-bit long double for NewABI.
 	HAVE_LONG_DOUBLE='defined(__mips64)'
 	TARGET=MIPS_IRIX; TARGETDIR=mips
@@ -129,18 +222,24 @@
   powerpc*-*-linux* | powerpc-*-sysv*)
 	TARGET=POWERPC; TARGETDIR=powerpc
 	;;
+  powerpc-*-amigaos*)
+	TARGET=POWERPC; TARGETDIR=powerpc
+	;;
   powerpc-*-beos*)
 	TARGET=POWERPC; TARGETDIR=powerpc
 	;;
-  powerpc-*-darwin*)
+  powerpc-*-darwin* | powerpc64-*-darwin*)
 	TARGET=POWERPC_DARWIN; TARGETDIR=powerpc
 	;;
   powerpc-*-aix* | rs6000-*-aix*)
 	TARGET=POWERPC_AIX; TARGETDIR=powerpc
 	;;
-  powerpc-*-freebsd*)
+  powerpc-*-freebsd* | powerpc-*-openbsd*)
 	TARGET=POWERPC_FREEBSD; TARGETDIR=powerpc
 	;;
+  powerpc64-*-freebsd*)
+	TARGET=POWERPC; TARGETDIR=powerpc
+	;;
   powerpc*-*-rtems*)
 	TARGET=POWERPC; TARGETDIR=powerpc
 	;;
@@ -160,17 +259,14 @@
 	TARGET=SPARC; TARGETDIR=sparc
 	;;
 
-  x86_64-*-darwin*)
-	TARGET=X86_DARWIN; TARGETDIR=x86
+  tile*-*)
+        TARGET=TILE; TARGETDIR=tile
+        ;;
+
+  xtensa*-*)
+	TARGET=XTENSA; TARGETDIR=xtensa
 	;;
 
-  x86_64-*-cygwin* | x86_64-*-mingw*)
-	TARGET=X86_WIN64; TARGETDIR=x86
-	;;
-
-  x86_64-*-*)
-	TARGET=X86_64; TARGETDIR=x86
-	;;
 esac
 
 AC_SUBST(AM_RUNTESTFLAGS)
@@ -181,6 +277,7 @@
 fi
 
 AM_CONDITIONAL(MIPS,[expr x$TARGET : 'xMIPS' > /dev/null])
+AM_CONDITIONAL(BFIN, test x$TARGET = xBFIN)
 AM_CONDITIONAL(SPARC, test x$TARGET = xSPARC)
 AM_CONDITIONAL(X86, test x$TARGET = xX86)
 AM_CONDITIONAL(X86_FREEBSD, test x$TARGET = xX86_FREEBSD)
@@ -191,10 +288,14 @@
 AM_CONDITIONAL(IA64, test x$TARGET = xIA64)
 AM_CONDITIONAL(M32R, test x$TARGET = xM32R)
 AM_CONDITIONAL(M68K, test x$TARGET = xM68K)
+AM_CONDITIONAL(MICROBLAZE, test x$TARGET = xMICROBLAZE)
+AM_CONDITIONAL(METAG, test x$TARGET = xMETAG)
+AM_CONDITIONAL(MOXIE, test x$TARGET = xMOXIE)
 AM_CONDITIONAL(POWERPC, test x$TARGET = xPOWERPC)
 AM_CONDITIONAL(POWERPC_AIX, test x$TARGET = xPOWERPC_AIX)
 AM_CONDITIONAL(POWERPC_DARWIN, test x$TARGET = xPOWERPC_DARWIN)
 AM_CONDITIONAL(POWERPC_FREEBSD, test x$TARGET = xPOWERPC_FREEBSD)
+AM_CONDITIONAL(AARCH64, test x$TARGET = xAARCH64)
 AM_CONDITIONAL(ARM, test x$TARGET = xARM)
 AM_CONDITIONAL(AVR32, test x$TARGET = xAVR32)
 AM_CONDITIONAL(LIBFFI_CRIS, test x$TARGET = xLIBFFI_CRIS)
@@ -206,6 +307,8 @@
 AM_CONDITIONAL(PA_LINUX, test x$TARGET = xPA_LINUX)
 AM_CONDITIONAL(PA_HPUX, test x$TARGET = xPA_HPUX)
 AM_CONDITIONAL(PA64_HPUX, test x$TARGET = xPA64_HPUX)
+AM_CONDITIONAL(TILE, test x$TARGET = xTILE)
+AM_CONDITIONAL(XTENSA, test x$TARGET = xXTENSA)
 
 AC_HEADER_STDC
 AC_CHECK_FUNCS(memcpy)
@@ -228,17 +331,7 @@
 
 AC_C_BIGENDIAN
 
-AC_CACHE_CHECK([assembler .cfi pseudo-op support],
-    libffi_cv_as_cfi_pseudo_op, [
-    libffi_cv_as_cfi_pseudo_op=unknown
-    AC_TRY_COMPILE([asm (".cfi_startproc\n\t.cfi_endproc");],,
-		   [libffi_cv_as_cfi_pseudo_op=yes],
-		   [libffi_cv_as_cfi_pseudo_op=no])
-])
-if test "x$libffi_cv_as_cfi_pseudo_op" = xyes; then
-    AC_DEFINE(HAVE_AS_CFI_PSEUDO_OP, 1,
-	      [Define if your assembler supports .cfi_* directives.])
-fi
+GCC_AS_CFI_PSEUDO_OP
 
 if test x$TARGET = xSPARC; then
     AC_CACHE_CHECK([assembler and linker support unaligned pc related relocs],
@@ -261,7 +354,7 @@
        libffi_cv_as_register_pseudo_op, [
        libffi_cv_as_register_pseudo_op=unknown
        # Check if we have .register
-       AC_TRY_COMPILE([asm (".register %g2, #scratch");],,
+       AC_TRY_COMPILE(,[asm (".register %g2, #scratch");],
 		       [libffi_cv_as_register_pseudo_op=yes],
 		       [libffi_cv_as_register_pseudo_op=no])
     ])
@@ -284,54 +377,122 @@
 	AC_DEFINE(HAVE_AS_X86_PCREL, 1,
 		  [Define if your assembler supports PC relative relocs.])
     fi
+
+    AC_CACHE_CHECK([assembler .ascii pseudo-op support],
+       libffi_cv_as_ascii_pseudo_op, [
+       libffi_cv_as_ascii_pseudo_op=unknown
+       # Check if we have .ascii
+       AC_TRY_COMPILE(,[asm (".ascii \\"string\\"");],
+		       [libffi_cv_as_ascii_pseudo_op=yes],
+		       [libffi_cv_as_ascii_pseudo_op=no])
+    ])
+    if test "x$libffi_cv_as_ascii_pseudo_op" = xyes; then
+       AC_DEFINE(HAVE_AS_ASCII_PSEUDO_OP, 1,
+	       [Define if your assembler supports .ascii.])
+    fi
+
+    AC_CACHE_CHECK([assembler .string pseudo-op support],
+       libffi_cv_as_string_pseudo_op, [
+       libffi_cv_as_string_pseudo_op=unknown
+       # Check if we have .string
+       AC_TRY_COMPILE(,[asm (".string \\"string\\"");],
+		       [libffi_cv_as_string_pseudo_op=yes],
+		       [libffi_cv_as_string_pseudo_op=no])
+    ])
+    if test "x$libffi_cv_as_string_pseudo_op" = xyes; then
+       AC_DEFINE(HAVE_AS_STRING_PSEUDO_OP, 1,
+	       [Define if your assembler supports .string.])
+    fi
 fi
 
+# On PaX enable kernels that have MPROTECT enable we can't use PROT_EXEC.
+AC_ARG_ENABLE(pax_emutramp,
+  [  --enable-pax_emutramp       enable pax emulated trampolines, for we can't use PROT_EXEC],
+  if test "$enable_pax_emutramp" = "yes"; then
+    AC_DEFINE(FFI_MMAP_EXEC_EMUTRAMP_PAX, 1,
+      [Define this if you want to enable pax emulated trampolines])
+  fi)
+
+if test x$TARGET = xX86_WIN64; then
+    LT_SYS_SYMBOL_USCORE
+    if test "x$sys_symbol_underscore" = xyes; then
+        AC_DEFINE(SYMBOL_UNDERSCORE, 1, [Define if symbols are underscored.])
+    fi
+fi
+
+FFI_EXEC_TRAMPOLINE_TABLE=0
 case "$target" in
-     *-apple-darwin10* | *-*-freebsd* | *-*-openbsd* | *-pc-solaris*)
+     *arm*-apple-darwin*)
+       FFI_EXEC_TRAMPOLINE_TABLE=1
+       AC_DEFINE(FFI_EXEC_TRAMPOLINE_TABLE, 1,
+                 [Cannot use PROT_EXEC on this target, so, we revert to
+                   alternative means])
+     ;;
+     *-apple-darwin1* | *-*-freebsd* | *-*-kfreebsd* | *-*-openbsd* | *-pc-solaris*)
        AC_DEFINE(FFI_MMAP_EXEC_WRIT, 1,
                  [Cannot use malloc on this target, so, we revert to
                    alternative means])
      ;;
 esac
+AM_CONDITIONAL(FFI_EXEC_TRAMPOLINE_TABLE, test x$FFI_EXEC_TRAMPOLINE_TABLE = x1)
+AC_SUBST(FFI_EXEC_TRAMPOLINE_TABLE)
 
-AC_CACHE_CHECK([whether .eh_frame section should be read-only],
-    libffi_cv_ro_eh_frame, [
-	libffi_cv_ro_eh_frame=no
-	echo 'extern void foo (void); void bar (void) { foo (); foo (); }' > conftest.c
-	if $CC $CFLAGS -S -fpic -fexceptions -o conftest.s conftest.c > /dev/null 2>&1; then
-	    if grep '.section.*eh_frame.*"a"' conftest.s > /dev/null; then
-		libffi_cv_ro_eh_frame=yes
-	    elif grep '.section.*eh_frame.*#alloc' conftest.c \
-		 | grep -v '#write' > /dev/null; then
-		libffi_cv_ro_eh_frame=yes
-	    fi
+if test x$TARGET = xX86_64; then
+    AC_CACHE_CHECK([assembler supports unwind section type],
+	libffi_cv_as_x86_64_unwind_section_type, [
+	libffi_cv_as_x86_64_unwind_section_type=yes
+	echo '.section .eh_frame,"a",@unwind' > conftest.s
+	if $CC $CFLAGS -c conftest.s 2>&1 | grep -i warning > /dev/null; then
+	    libffi_cv_as_x86_64_unwind_section_type=no
 	fi
-	rm -f conftest.*
-    ])
-if test "x$libffi_cv_ro_eh_frame" = xyes; then
-    AC_DEFINE(HAVE_RO_EH_FRAME, 1,
-	      [Define if .eh_frame sections should be read-only.])
-    AC_DEFINE(EH_FRAME_FLAGS, "a",
-	      [Define to the flags needed for the .section .eh_frame directive.])
-else
-    AC_DEFINE(EH_FRAME_FLAGS, "aw",
-	      [Define to the flags needed for the .section .eh_frame directive.])
+	])
+    if test "x$libffi_cv_as_x86_64_unwind_section_type" = xyes; then
+	AC_DEFINE(HAVE_AS_X86_64_UNWIND_SECTION_TYPE, 1,
+		  [Define if your assembler supports unwind section type.])
+    fi
 fi
 
-AC_CACHE_CHECK([for __attribute__((visibility("hidden")))],
-    libffi_cv_hidden_visibility_attribute, [
-	echo 'int __attribute__ ((visibility ("hidden"))) foo (void) { return 1; }' > conftest.c
-	libffi_cv_hidden_visibility_attribute=no
-	if AC_TRY_COMMAND(${CC-cc} -Werror -S conftest.c -o conftest.s 1>&AS_MESSAGE_LOG_FD); then
-	    if grep '\.hidden.*foo' conftest.s >/dev/null; then
-		libffi_cv_hidden_visibility_attribute=yes
-	    fi
-	fi
-	rm -f conftest.*
-    ])
-if test $libffi_cv_hidden_visibility_attribute = yes; then
-    AC_DEFINE(HAVE_HIDDEN_VISIBILITY_ATTRIBUTE, 1,
-	      [Define if __attribute__((visibility("hidden"))) is supported.])
+if test "x$GCC" = "xyes"; then
+  AC_CACHE_CHECK([whether .eh_frame section should be read-only],
+      libffi_cv_ro_eh_frame, [
+  	libffi_cv_ro_eh_frame=no
+  	echo 'extern void foo (void); void bar (void) { foo (); foo (); }' > conftest.c
+  	if $CC $CFLAGS -c -fpic -fexceptions -o conftest.o conftest.c > /dev/null 2>&1; then
+	    objdump -h conftest.o > conftest.dump 2>&1
+	    libffi_eh_frame_line=`grep -n eh_frame conftest.dump | cut -d: -f 1`
+	    libffi_test_line=`expr $libffi_eh_frame_line + 1`p
+	    sed -n $libffi_test_line conftest.dump > conftest.line
+  	    if grep READONLY conftest.line > /dev/null; then
+  		libffi_cv_ro_eh_frame=yes
+  	    fi
+  	fi
+  	rm -f conftest.*
+      ])
+  if test "x$libffi_cv_ro_eh_frame" = xyes; then
+      AC_DEFINE(HAVE_RO_EH_FRAME, 1,
+  	      [Define if .eh_frame sections should be read-only.])
+      AC_DEFINE(EH_FRAME_FLAGS, "a",
+  	      [Define to the flags needed for the .section .eh_frame directive.  ])
+  else
+      AC_DEFINE(EH_FRAME_FLAGS, "aw",
+  	      [Define to the flags needed for the .section .eh_frame directive.  ])
+  fi
+
+  AC_CACHE_CHECK([for __attribute__((visibility("hidden")))],
+      libffi_cv_hidden_visibility_attribute, [
+  	echo 'int __attribute__ ((visibility ("hidden"))) foo (void) { return 1  ; }' > conftest.c
+  	libffi_cv_hidden_visibility_attribute=no
+  	if AC_TRY_COMMAND(${CC-cc} -Werror -S conftest.c -o conftest.s 1>&AS_MESSAGE_LOG_FD); then
+  	    if grep '\.hidden.*foo' conftest.s >/dev/null; then
+  		libffi_cv_hidden_visibility_attribute=yes
+  	    fi
+  	fi
+  	rm -f conftest.*
+      ])
+  if test $libffi_cv_hidden_visibility_attribute = yes; then
+      AC_DEFINE(HAVE_HIDDEN_VISIBILITY_ATTRIBUTE, 1,
+  	      [Define if __attribute__((visibility("hidden"))) is supported.])
+  fi
 fi
 
 AH_BOTTOM([
@@ -360,12 +521,14 @@
   if test "$enable_debug" = "yes"; then
     AC_DEFINE(FFI_DEBUG, 1, [Define this if you want extra debugging.])
   fi)
+AM_CONDITIONAL(FFI_DEBUG, test "$enable_debug" = "yes")
 
 AC_ARG_ENABLE(structs,
 [  --disable-structs       omit code for struct support],
   if test "$enable_structs" = "no"; then
     AC_DEFINE(FFI_NO_STRUCTS, 1, [Define this is you do not want support for aggregate types.])
   fi)
+AM_CONDITIONAL(FFI_DEBUG, test "$enable_debug" = "yes")
 
 AC_ARG_ENABLE(raw-api,
 [  --disable-raw-api       make the raw api unavailable],
@@ -379,28 +542,28 @@
     AC_DEFINE(USING_PURIFY, 1, [Define this if you are using Purify and want to suppress spurious messages.])
   fi)
 
-if test -n "$with_cross_host" &&
-   test x"$with_cross_host" != x"no"; then
-  toolexecdir='$(exec_prefix)/$(target_alias)'
-  toolexeclibdir='$(toolexecdir)/lib'
+# These variables are only ever used when we cross-build to X86_WIN32.
+# And we only support this with GCC, so...
+if test "x$GCC" = "xyes"; then
+  if test -n "$with_cross_host" &&
+     test x"$with_cross_host" != x"no"; then
+    toolexecdir='$(exec_prefix)/$(target_alias)'
+    toolexeclibdir='$(toolexecdir)/lib'
+  else
+    toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
+    toolexeclibdir='$(libdir)'
+  fi
+  multi_os_directory=`$CC -print-multi-os-directory`
+  case $multi_os_directory in
+    .) ;; # Avoid trailing /.
+    ../*) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
+  esac
+  AC_SUBST(toolexecdir)
 else
-  toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
   toolexeclibdir='$(libdir)'
 fi
-multi_os_directory=`$CC -print-multi-os-directory`
-case $multi_os_directory in
-  .) ;; # Avoid trailing /.
-  *) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
-esac
-AC_SUBST(toolexecdir)
 AC_SUBST(toolexeclibdir)
 
-if test "${multilib}" = "yes"; then
-  multilib_arg="--enable-multilib"
-else
-  multilib_arg=
-fi
-
 AC_CONFIG_COMMANDS(include, [test -d include || mkdir include])
 AC_CONFIG_COMMANDS(src, [
 test -d src || mkdir src
diff --git a/Modules/_ctypes/libffi/depcomp b/Modules/_ctypes/libffi/depcomp
index ca5ea4e..df8eea7 100755
--- a/Modules/_ctypes/libffi/depcomp
+++ b/Modules/_ctypes/libffi/depcomp
@@ -1,10 +1,10 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2006-10-15.18
+scriptversion=2009-04-28.21; # UTC
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006 Free Software
-# Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
+# Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -17,9 +17,7 @@
 # GNU General Public License for more details.
 
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -87,6 +85,15 @@
    depmode=dashmstdout
 fi
 
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+   # This is just like msvisualcpp but w/o cygpath translation.
+   # Just convert the backslash-escaped backslashes to single forward
+   # slashes to satisfy depend.m4
+   cygpath_u="sed s,\\\\\\\\,/,g"
+   depmode=msvisualcpp
+fi
+
 case "$depmode" in
 gcc3)
 ## gcc 3 implements dependency tracking that does exactly what
@@ -192,14 +199,14 @@
 ' < "$tmpdepfile" \
     | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
     tr '
-' ' ' >> $depfile
-    echo >> $depfile
+' ' ' >> "$depfile"
+    echo >> "$depfile"
 
     # The second pass generates a dummy entry for each header file.
     tr ' ' '
 ' < "$tmpdepfile" \
    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> $depfile
+   >> "$depfile"
   else
     # The sourcefile does not contain any dependencies, so just
     # store a dummy comment line, to avoid errors with the Makefile
@@ -215,34 +222,39 @@
   # current directory.  Also, the AIX compiler puts `$object:' at the
   # start of each line; $object doesn't have directory information.
   # Version 6 uses the directory in both cases.
-  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
-  tmpdepfile="$stripped.u"
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
   if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
     "$@" -Wc,-M
   else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
     "$@" -M
   fi
   stat=$?
 
-  if test -f "$tmpdepfile"; then :
-  else
-    stripped=`echo "$stripped" | sed 's,^.*/,,'`
-    tmpdepfile="$stripped.u"
-  fi
-
   if test $stat -eq 0; then :
   else
-    rm -f "$tmpdepfile"
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
     exit $stat
   fi
 
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
   if test -f "$tmpdepfile"; then
-    outname="$stripped.o"
     # Each line is of the form `foo.o: dependent.h'.
     # Do two passes, one to just change these to
     # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
-    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+    # That's a tab and a space in the [].
+    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
   else
     # The sourcefile does not contain any dependencies, so just
     # store a dummy comment line, to avoid errors with the Makefile
@@ -323,7 +335,12 @@
   if test -f "$tmpdepfile"; then
     sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
     # Add `dependent.h:' lines.
-    sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
+    sed -ne '2,${
+	       s/^ *//
+	       s/ \\*$//
+	       s/$/:/
+	       p
+	     }' "$tmpdepfile" >> "$depfile"
   else
     echo "#dummy" > "$depfile"
   fi
@@ -399,7 +416,7 @@
 
   # Remove the call to Libtool.
   if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
+    while test "X$1" != 'X--mode=compile'; do
       shift
     done
     shift
@@ -450,32 +467,39 @@
   "$@" || exit $?
   # Remove any Libtool call
   if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
+    while test "X$1" != 'X--mode=compile'; do
       shift
     done
     shift
   fi
   # X makedepend
   shift
-  cleared=no
-  for arg in "$@"; do
+  cleared=no eat=no
+  for arg
+  do
     case $cleared in
     no)
       set ""; shift
       cleared=yes ;;
     esac
+    if test $eat = yes; then
+      eat=no
+      continue
+    fi
     case "$arg" in
     -D*|-I*)
       set fnord "$@" "$arg"; shift ;;
     # Strip any option that makedepend may not understand.  Remove
     # the object too, otherwise makedepend will parse it as a source file.
+    -arch)
+      eat=yes ;;
     -*|$object)
       ;;
     *)
       set fnord "$@" "$arg"; shift ;;
     esac
   done
-  obj_suffix="`echo $object | sed 's/^.*\././'`"
+  obj_suffix=`echo "$object" | sed 's/^.*\././'`
   touch "$tmpdepfile"
   ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
   rm -f "$depfile"
@@ -495,7 +519,7 @@
 
   # Remove the call to Libtool.
   if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
+    while test "X$1" != 'X--mode=compile'; do
       shift
     done
     shift
@@ -533,13 +557,27 @@
 
 msvisualcpp)
   # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o,
-  # because we must use -o when running libtool.
+  # always write the preprocessed file to stdout.
   "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
   IFS=" "
   for arg
   do
     case "$arg" in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
     "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
 	set fnord "$@"
 	shift
@@ -552,16 +590,23 @@
 	;;
     esac
   done
-  "$@" -E |
-  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+  "$@" -E 2>/dev/null |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
   echo "	" >> "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
+msvcmsys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
 none)
   exec "$@"
   ;;
@@ -580,5 +625,6 @@
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End:
diff --git a/Modules/_ctypes/libffi/doc/libffi.info b/Modules/_ctypes/libffi/doc/libffi.info
index 896a5ec..6d5acf8 100644
--- a/Modules/_ctypes/libffi/doc/libffi.info
+++ b/Modules/_ctypes/libffi/doc/libffi.info
Binary files differ
diff --git a/Modules/_ctypes/libffi/doc/libffi.texi b/Modules/_ctypes/libffi/doc/libffi.texi
index 9fa5b17..5c0552b 100644
--- a/Modules/_ctypes/libffi/doc/libffi.texi
+++ b/Modules/_ctypes/libffi/doc/libffi.texi
@@ -19,7 +19,7 @@
 This manual is for Libffi, a portable foreign-function interface
 library.
 
-Copyright @copyright{} 2008, 2010 Red Hat, Inc.
+Copyright @copyright{} 2008, 2010, 2011 Red Hat, Inc.
 
 @quotation
 Permission is granted to copy, distribute and/or modify this document
@@ -133,8 +133,6 @@
 you want.  @ref{Multiple ABIs} for more information.
 
 @var{nargs} is the number of arguments that this function accepts.
-@samp{libffi} does not yet handle varargs functions; see @ref{Missing
-Features} for more information.
 
 @var{rtype} is a pointer to an @code{ffi_type} structure that
 describes the return type of the function.  @xref{Types}.
@@ -150,6 +148,30 @@
 is invalid.
 @end defun
 
+If the function being called is variadic (varargs) then
+@code{ffi_prep_cif_var} must be used instead of @code{ffi_prep_cif}.
+
+@findex ffi_prep_cif_var
+@defun ffi_status ffi_prep_cif_var (ffi_cif *@var{cif}, ffi_abi var{abi}, unsigned int @var{nfixedargs}, unsigned int var{ntotalargs}, ffi_type *@var{rtype}, ffi_type **@var{argtypes})
+This initializes @var{cif} according to the given parameters for
+a call to a variadic function.  In general it's operation is the
+same as for @code{ffi_prep_cif} except that:
+
+@var{nfixedargs} is the number of fixed arguments, prior to any
+variadic arguments.  It must be greater than zero.
+
+@var{ntotalargs} the total number of arguments, including variadic
+and fixed arguments.
+
+Note that, different cif's must be prepped for calls to the same
+function when different numbers of arguments are passed.
+
+Also note that a call to @code{ffi_prep_cif_var} with
+@var{nfixedargs}=@var{nototalargs} is NOT equivalent to a call to
+@code{ffi_prep_cif}.
+
+@end defun
+
 
 To call a function using an initialized @code{ffi_cif}, use the
 @code{ffi_call} function:
@@ -171,7 +193,9 @@
 @var{avalues} is a vector of @code{void *} pointers that point to the
 memory locations holding the argument values for a call.  If @var{cif}
 declares that the function has no arguments (i.e., @var{nargs} was 0),
-then @var{avalues} is ignored.
+then @var{avalues} is ignored.  Note that argument values may be
+modified by the callee (for instance, structs passed by value); the
+burden of copying pass-by-value arguments is placed on the caller.
 @end defun
 
 
@@ -336,7 +360,7 @@
 new @code{ffi_type} object for it.
 
 @tindex ffi_type
-@deftp ffi_type
+@deftp {Data type} ffi_type
 The @code{ffi_type} has the following members:
 @table @code
 @item size_t size
@@ -438,7 +462,7 @@
 heap.  Memory management for closures is handled by a pair of
 functions:
 
-@findex ffi_closure_alloca
+@findex ffi_closure_alloc
 @defun void *ffi_closure_alloc (size_t @var{size}, void **@var{code})
 Allocate a chunk of memory holding @var{size} bytes.  This returns a
 pointer to the writable address, and sets *@var{code} to the
@@ -570,9 +594,7 @@
 
 @itemize @bullet
 @item
-There is no support for calling varargs functions.  This may work on
-some platforms, depending on how the ABI is defined, but it is not
-reliable.
+Variadic closures.
 
 @item
 There is no support for bit fields in structures.
@@ -589,6 +611,8 @@
 @c anything else?
 @end itemize
 
+Note that variadic support is very new and tested on a relatively
+small number of platforms.
 
 @node Index
 @unnumbered Index
diff --git a/Modules/_ctypes/libffi/doc/stamp-vti b/Modules/_ctypes/libffi/doc/stamp-vti
index 81d0b79..54255ba 100644
--- a/Modules/_ctypes/libffi/doc/stamp-vti
+++ b/Modules/_ctypes/libffi/doc/stamp-vti
@@ -1,4 +1,4 @@
-@set UPDATED 14 February 2008
-@set UPDATED-MONTH February 2008
-@set EDITION 3.0.8
-@set VERSION 3.0.8
+@set UPDATED 16 March 2013
+@set UPDATED-MONTH March 2013
+@set EDITION 3.0.13
+@set VERSION 3.0.13
diff --git a/Modules/_ctypes/libffi/doc/version.texi b/Modules/_ctypes/libffi/doc/version.texi
index 81d0b79..54255ba 100644
--- a/Modules/_ctypes/libffi/doc/version.texi
+++ b/Modules/_ctypes/libffi/doc/version.texi
@@ -1,4 +1,4 @@
-@set UPDATED 14 February 2008
-@set UPDATED-MONTH February 2008
-@set EDITION 3.0.8
-@set VERSION 3.0.8
+@set UPDATED 16 March 2013
+@set UPDATED-MONTH March 2013
+@set EDITION 3.0.13
+@set VERSION 3.0.13
diff --git a/Modules/_ctypes/libffi/fficonfig.h.in b/Modules/_ctypes/libffi/fficonfig.h.in
index e03bbf9..c77585d 100644
--- a/Modules/_ctypes/libffi/fficonfig.h.in
+++ b/Modules/_ctypes/libffi/fficonfig.h.in
@@ -17,6 +17,12 @@
 /* Define this if you want extra debugging. */
 #undef FFI_DEBUG
 
+/* Cannot use PROT_EXEC on this target, so, we revert to alternative means */
+#undef FFI_EXEC_TRAMPOLINE_TABLE
+
+/* Define this if you want to enable pax emulated trampolines */
+#undef FFI_MMAP_EXEC_EMUTRAMP_PAX
+
 /* Cannot use malloc on this target, so, we revert to alternative means */
 #undef FFI_MMAP_EXEC_WRIT
 
@@ -33,6 +39,9 @@
    */
 #undef HAVE_ALLOCA_H
 
+/* Define if your assembler supports .ascii. */
+#undef HAVE_AS_ASCII_PSEUDO_OP
+
 /* Define if your assembler supports .cfi_* directives. */
 #undef HAVE_AS_CFI_PSEUDO_OP
 
@@ -43,6 +52,12 @@
    */
 #undef HAVE_AS_SPARC_UA_PCREL
 
+/* Define if your assembler supports .string. */
+#undef HAVE_AS_STRING_PSEUDO_OP
+
+/* Define if your assembler supports unwind section type. */
+#undef HAVE_AS_X86_64_UNWIND_SECTION_TYPE
+
 /* Define if your assembler supports PC relative relocs. */
 #undef HAVE_AS_X86_PCREL
 
@@ -148,6 +163,9 @@
 /* Define to 1 if you have the ANSI C header files. */
 #undef STDC_HEADERS
 
+/* Define if symbols are underscored. */
+#undef SYMBOL_UNDERSCORE
+
 /* Define this if you are using Purify and want to suppress spurious messages.
    */
 #undef USING_PURIFY
@@ -167,6 +185,9 @@
 # endif
 #endif
 
+/* Define to `unsigned int' if <sys/types.h> does not define. */
+#undef size_t
+
 
 #ifdef HAVE_HIDDEN_VISIBILITY_ATTRIBUTE
 #ifdef LIBFFI_ASM
diff --git a/Modules/_ctypes/libffi/generate-ios-source-and-headers.py b/Modules/_ctypes/libffi/generate-ios-source-and-headers.py
new file mode 100644
index 0000000..c2bca73
--- /dev/null
+++ b/Modules/_ctypes/libffi/generate-ios-source-and-headers.py
@@ -0,0 +1,160 @@
+#!/usr/bin/env python
+
+import subprocess
+import re
+import os
+import errno
+import collections
+import sys
+
+class Platform(object):
+    pass
+
+sdk_re = re.compile(r'.*-sdk ([a-zA-Z0-9.]*)')
+
+def sdkinfo(sdkname):
+    ret = {}
+    for line in subprocess.Popen(['xcodebuild', '-sdk', sdkname, '-version'], stdout=subprocess.PIPE).stdout:
+        kv = line.strip().split(': ', 1)
+        if len(kv) == 2:
+            k,v = kv
+            ret[k] = v
+    return ret
+
+sim_sdk_info = sdkinfo('iphonesimulator')
+device_sdk_info = sdkinfo('iphoneos')
+
+def latest_sdks():
+    latest_sim = None
+    latest_device = None
+    for line in subprocess.Popen(['xcodebuild', '-showsdks'], stdout=subprocess.PIPE).stdout:
+        match = sdk_re.match(line)
+        if match:
+            if 'Simulator' in line:
+                latest_sim = match.group(1)
+            elif 'iOS' in line:
+                latest_device = match.group(1)
+
+    return latest_sim, latest_device
+
+sim_sdk, device_sdk = latest_sdks()
+
+class simulator_platform(Platform):
+    sdk='iphonesimulator'
+    arch = 'i386'
+    name = 'simulator'
+    triple = 'i386-apple-darwin10'
+    sdkroot = sim_sdk_info['Path']
+
+    prefix = "#if !defined(__arm__) && defined(__i386__)\n\n"
+    suffix = "\n\n#endif"
+
+class device_platform(Platform):
+    sdk='iphoneos'
+    name = 'ios'
+    arch = 'armv7'
+    triple = 'arm-apple-darwin10'
+    sdkroot = device_sdk_info['Path']
+
+    prefix = "#ifdef __arm__\n\n"
+    suffix = "\n\n#endif"
+
+
+def move_file(src_dir, dst_dir, filename, file_suffix=None, prefix='', suffix=''):
+    if not os.path.exists(dst_dir):
+        os.makedirs(dst_dir)
+
+    out_filename = filename
+
+    if file_suffix:
+        split_name = os.path.splitext(filename)
+        out_filename =  "%s_%s%s" % (split_name[0], file_suffix, split_name[1])
+
+    with open(os.path.join(src_dir, filename)) as in_file:
+        with open(os.path.join(dst_dir, out_filename), 'w') as out_file:
+            if prefix:
+                out_file.write(prefix)
+
+            out_file.write(in_file.read())
+
+            if suffix:
+                out_file.write(suffix)
+
+headers_seen = collections.defaultdict(set)
+
+def move_source_tree(src_dir, dest_dir, dest_include_dir, arch=None, prefix=None, suffix=None):
+    for root, dirs, files in os.walk(src_dir, followlinks=True):
+        relroot = os.path.relpath(root,src_dir)
+
+        def move_dir(arch, prefix='', suffix='', files=[]):
+            for file in files:
+                file_suffix = None
+                if file.endswith('.h'):
+                    if dest_include_dir:
+                        file_suffix = arch
+                        if arch:
+                            headers_seen[file].add(arch)
+                        move_file(root, dest_include_dir, file, arch, prefix=prefix, suffix=suffix)
+
+                elif dest_dir:
+                    outroot = os.path.join(dest_dir, relroot)
+                    move_file(root, outroot, file, prefix=prefix, suffix=suffix)
+
+        if relroot == '.':
+            move_dir(arch=arch,
+                     files=files,
+                     prefix=prefix,
+                     suffix=suffix)
+        elif relroot == 'arm':
+            move_dir(arch='arm',
+                     prefix="#ifdef __arm__\n\n",
+                     suffix="\n\n#endif",
+                     files=files)
+        elif relroot == 'x86':
+            move_dir(arch='i386',
+                     prefix="#if !defined(__arm__) && defined(__i386__)\n\n",
+                     suffix="\n\n#endif",
+                     files=files)
+
+def build_target(platform):
+    def xcrun_cmd(cmd):
+        return subprocess.check_output(['xcrun', '-sdk', platform.sdkroot, '-find', cmd]).strip()
+
+    build_dir = 'build_' + platform.name
+    if not os.path.exists(build_dir):
+        os.makedirs(build_dir)
+        env = dict(CC=xcrun_cmd('clang'),
+                   LD=xcrun_cmd('ld'),
+                   CFLAGS='-arch %s -isysroot %s -miphoneos-version-min=4.0' % (platform.arch, platform.sdkroot))
+        working_dir=os.getcwd()
+        try:
+            os.chdir(build_dir)
+            subprocess.check_call(['../configure', '-host', platform.triple], env=env)
+            move_source_tree('.', None, '../ios/include',
+                             arch=platform.arch,
+                             prefix=platform.prefix,
+                             suffix=platform.suffix)
+            move_source_tree('./include', None, '../ios/include',
+                            arch=platform.arch,
+                            prefix=platform.prefix,
+                            suffix=platform.suffix)
+        finally:
+            os.chdir(working_dir)
+
+        for header_name, archs in headers_seen.iteritems():
+            basename, suffix = os.path.splitext(header_name)
+
+def main():
+    move_source_tree('src', 'ios/src', 'ios/include')
+    move_source_tree('include', None, 'ios/include')
+    build_target(simulator_platform)
+    build_target(device_platform)
+
+    for header_name, archs in headers_seen.iteritems():
+        basename, suffix = os.path.splitext(header_name)
+        with open(os.path.join('ios/include', header_name), 'w') as header:
+            for arch in archs:
+                header.write('#include <%s_%s%s>\n' % (basename, arch, suffix))
+
+if __name__ == '__main__':
+    main()
diff --git a/Modules/_ctypes/libffi/generate-osx-source-and-headers.py b/Modules/_ctypes/libffi/generate-osx-source-and-headers.py
new file mode 100644
index 0000000..64313c1
--- /dev/null
+++ b/Modules/_ctypes/libffi/generate-osx-source-and-headers.py
@@ -0,0 +1,153 @@
+#!/usr/bin/env python
+import subprocess
+import re
+import os
+import errno
+import collections
+import sys
+
+class Platform(object):
+    pass
+
+sdk_re = re.compile(r'.*-sdk ([a-zA-Z0-9.]*)')
+
+def sdkinfo(sdkname):
+    ret = {}
+    for line in subprocess.Popen(['xcodebuild', '-sdk', sdkname, '-version'], stdout=subprocess.PIPE).stdout:
+        kv = line.strip().split(': ', 1)
+        if len(kv) == 2:
+            k,v = kv
+            ret[k] = v
+    return ret
+
+desktop_sdk_info = sdkinfo('macosx')
+
+def latest_sdks():
+    latest_desktop = None
+    for line in subprocess.Popen(['xcodebuild', '-showsdks'], stdout=subprocess.PIPE).stdout:
+        match = sdk_re.match(line)
+        if match:
+            if 'OS X' in line:
+                latest_desktop = match.group(1)
+
+    return latest_desktop
+
+desktop_sdk = latest_sdks()
+
+class desktop_platform_32(Platform):
+    sdk='macosx'
+    arch = 'i386'
+    name = 'mac32'
+    triple = 'i386-apple-darwin10'
+    sdkroot = desktop_sdk_info['Path']
+
+    prefix = "#if defined(__i386__) && !defined(__x86_64__)\n\n"
+    suffix = "\n\n#endif"
+
+class desktop_platform_64(Platform):
+    sdk='macosx'
+    arch = 'x86_64'
+    name = 'mac'
+    triple = 'x86_64-apple-darwin10'
+    sdkroot = desktop_sdk_info['Path']
+
+    prefix = "#if !defined(__i386__) && defined(__x86_64__)\n\n"
+    suffix = "\n\n#endif"
+
+def move_file(src_dir, dst_dir, filename, file_suffix=None, prefix='', suffix=''):
+    if not os.path.exists(dst_dir):
+        os.makedirs(dst_dir)
+
+    out_filename = filename
+
+    if file_suffix:
+        split_name = os.path.splitext(filename)
+        out_filename =  "%s_%s%s" % (split_name[0], file_suffix, split_name[1])
+
+    with open(os.path.join(src_dir, filename)) as in_file:
+        with open(os.path.join(dst_dir, out_filename), 'w') as out_file:
+            if prefix:
+                out_file.write(prefix)
+
+            out_file.write(in_file.read())
+
+            if suffix:
+                out_file.write(suffix)
+
+headers_seen = collections.defaultdict(set)
+
+def move_source_tree(src_dir, dest_dir, dest_include_dir, arch=None, prefix=None, suffix=None):
+    for root, dirs, files in os.walk(src_dir, followlinks=True):
+        relroot = os.path.relpath(root,src_dir)
+
+        def move_dir(arch, prefix='', suffix='', files=[]):
+            for file in files:
+                file_suffix = None
+                if file.endswith('.h'):
+                    if dest_include_dir:
+                        file_suffix = arch
+                        if arch:
+                            headers_seen[file].add(arch)
+                        move_file(root, dest_include_dir, file, arch, prefix=prefix, suffix=suffix)
+
+                elif dest_dir:
+                    outroot = os.path.join(dest_dir, relroot)
+                    move_file(root, outroot, file, prefix=prefix, suffix=suffix)
+
+        if relroot == '.':
+            move_dir(arch=arch,
+                     files=files,
+                     prefix=prefix,
+                     suffix=suffix)
+        elif relroot == 'x86':
+            move_dir(arch='i386',
+                     prefix="#if defined(__i386__) && !defined(__x86_64__)\n\n",
+                     suffix="\n\n#endif",
+                     files=files)
+            move_dir(arch='x86_64',
+                     prefix="#if !defined(__i386__) && defined(__x86_64__)\n\n",
+                     suffix="\n\n#endif",
+                     files=files)
+
+def build_target(platform):
+    def xcrun_cmd(cmd):
+        return subprocess.check_output(['xcrun', '-sdk', platform.sdkroot, '-find', cmd]).strip()
+
+    build_dir = 'build_' + platform.name
+    if not os.path.exists(build_dir):
+        os.makedirs(build_dir)
+        env = dict(CC=xcrun_cmd('clang'),
+                   LD=xcrun_cmd('ld'),
+                   CFLAGS='-arch %s -isysroot %s -mmacosx-version-min=10.6' % (platform.arch, platform.sdkroot))
+        working_dir=os.getcwd()
+        try:
+            os.chdir(build_dir)
+            subprocess.check_call(['../configure', '-host', platform.triple], env=env)
+            move_source_tree('.', None, '../osx/include',
+                             arch=platform.arch,
+                             prefix=platform.prefix,
+                             suffix=platform.suffix)
+            move_source_tree('./include', None, '../osx/include',
+                             arch=platform.arch,
+                             prefix=platform.prefix,
+                             suffix=platform.suffix)
+        finally:
+            os.chdir(working_dir)
+
+        for header_name, archs in headers_seen.iteritems():
+            basename, suffix = os.path.splitext(header_name)
+
+def main():
+    move_source_tree('src', 'osx/src', 'osx/include')
+    move_source_tree('include', None, 'osx/include')
+    build_target(desktop_platform_32)
+    build_target(desktop_platform_64)
+
+    for header_name, archs in headers_seen.iteritems():
+        basename, suffix = os.path.splitext(header_name)
+        with open(os.path.join('osx/include', header_name), 'w') as header:
+            for arch in archs:
+                header.write('#include <%s_%s%s>\n' % (basename, arch, suffix))
+
+if __name__ == '__main__':
+    main()
diff --git a/Modules/_ctypes/libffi/include/Makefile.in b/Modules/_ctypes/libffi/include/Makefile.in
index 136f36c..2c36e36 100644
--- a/Modules/_ctypes/libffi/include/Makefile.in
+++ b/Modules/_ctypes/libffi/include/Makefile.in
@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11 from Makefile.am.
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,6 +15,23 @@
 @SET_MAKE@
 
 VPATH = @srcdir@
+am__make_dryrun = \
+  { \
+    am__dry=no; \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+      *) \
+        for am__flg in $$MAKEFLAGS; do \
+          case $$am__flg in \
+            *=*|--*) ;; \
+            *n*) am__dry=yes; break;; \
+          esac; \
+        done;; \
+    esac; \
+    test $$am__dry = yes; \
+  }
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -39,7 +55,19 @@
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
 	$(srcdir)/ffi.h.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+am__aclocal_m4_deps = $(top_srcdir)/m4/asmcfi.m4 \
+	$(top_srcdir)/m4/ax_append_flag.m4 \
+	$(top_srcdir)/m4/ax_cc_maxopt.m4 \
+	$(top_srcdir)/m4/ax_cflags_warn_all.m4 \
+	$(top_srcdir)/m4/ax_check_compile_flag.m4 \
+	$(top_srcdir)/m4/ax_compiler_vendor.m4 \
+	$(top_srcdir)/m4/ax_configure_args.m4 \
+	$(top_srcdir)/m4/ax_enable_builddir.m4 \
+	$(top_srcdir)/m4/ax_gcc_archflag.m4 \
+	$(top_srcdir)/m4/ax_gcc_x86_cpuid.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/acinclude.m4 \
 	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
@@ -49,6 +77,11 @@
 CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
@@ -70,6 +103,12 @@
 am__base_list = \
   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
 am__installdirs = "$(DESTDIR)$(includesdir)"
 HEADERS = $(nodist_includes_HEADERS)
 ETAGS = etags
@@ -78,6 +117,7 @@
 ACLOCAL = @ACLOCAL@
 ALLOCA = @ALLOCA@
 AMTAR = @AMTAR@
+AM_LTLDFLAGS = @AM_LTLDFLAGS@
 AM_RUNTESTFLAGS = @AM_RUNTESTFLAGS@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
@@ -95,6 +135,7 @@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
 DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
@@ -102,6 +143,7 @@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
+FFI_EXEC_TRAMPOLINE_TABLE = @FFI_EXEC_TRAMPOLINE_TABLE@
 FGREP = @FGREP@
 GREP = @GREP@
 HAVE_LONG_DOUBLE = @HAVE_LONG_DOUBLE@
@@ -120,6 +162,7 @@
 LTLIBOBJS = @LTLIBOBJS@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
 NM = @NM@
 NMEDIT = @NMEDIT@
@@ -132,8 +175,10 @@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
+PRTDIAG = @PRTDIAG@
 RANLIB = @RANLIB@
 SED = @SED@
 SET_MAKE = @SET_MAKE@
@@ -146,6 +191,7 @@
 abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 am__include = @am__include@
@@ -153,6 +199,7 @@
 am__quote = @am__quote@
 am__tar = @am__tar@
 am__untar = @am__untar@
+ax_enable_builddir_sed = @ax_enable_builddir_sed@
 bindir = @bindir@
 build = @build@
 build_alias = @build_alias@
@@ -178,7 +225,6 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -189,6 +235,7 @@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
+sys_symbol_underscore = @sys_symbol_underscore@
 sysconfdir = @sysconfdir@
 target = @target@
 target_alias = @target_alias@
@@ -248,8 +295,11 @@
 	-rm -rf .libs _libs
 install-nodist_includesHEADERS: $(nodist_includes_HEADERS)
 	@$(NORMAL_INSTALL)
-	test -z "$(includesdir)" || $(MKDIR_P) "$(DESTDIR)$(includesdir)"
 	@list='$(nodist_includes_HEADERS)'; test -n "$(includesdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(includesdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(includesdir)" || exit 1; \
+	fi; \
 	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; \
@@ -263,9 +313,7 @@
 	@$(NORMAL_UNINSTALL)
 	@list='$(nodist_includes_HEADERS)'; test -n "$(includesdir)" || list=; \
 	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$files" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(includesdir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(includesdir)" && rm -f $$files
+	dir='$(DESTDIR)$(includesdir)'; $(am__uninstall_files_from_dir)
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -316,6 +364,20 @@
 	  && $(am__cd) $(top_srcdir) \
 	  && gtags -i $(GTAGS_ARGS) "$$here"
 
+cscopelist:  $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS) $(LISP)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
@@ -366,10 +428,15 @@
 
 installcheck: installcheck-am
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
@@ -451,7 +518,7 @@
 .MAKE: install-am install-strip
 
 .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
-	clean-libtool ctags distclean distclean-generic \
+	clean-libtool cscopelist ctags distclean distclean-generic \
 	distclean-libtool distclean-tags distdir dvi dvi-am html \
 	html-am info info-am install install-am install-data \
 	install-data-am install-dvi install-dvi-am install-exec \
diff --git a/Modules/_ctypes/libffi/include/ffi.h.in b/Modules/_ctypes/libffi/include/ffi.h.in
index df7d2cd..a51583b 100644
--- a/Modules/_ctypes/libffi/include/ffi.h.in
+++ b/Modules/_ctypes/libffi/include/ffi.h.in
@@ -1,16 +1,17 @@
 /* -----------------------------------------------------------------*-C-*-
-   libffi @VERSION@ - Copyright (c) 1996-2003, 2007, 2008  Red Hat, Inc.
+   libffi @VERSION@ - Copyright (c) 2011 Anthony Green
+                    - Copyright (c) 1996-2003, 2007, 2008 Red Hat, Inc.
 
-   Permission is hereby granted, free of charge, to any person obtaining
-   a copy of this software and associated documentation files (the
-   ``Software''), to deal in the Software without restriction, including
-   without limitation the rights to use, copy, modify, merge, publish,
-   distribute, sublicense, and/or sell copies of the Software, and to
-   permit persons to whom the Software is furnished to do so, subject to
-   the following conditions:
+   Permission is hereby granted, free of charge, to any person
+   obtaining a copy of this software and associated documentation
+   files (the ``Software''), to deal in the Software without
+   restriction, including without limitation the rights to use, copy,
+   modify, merge, publish, distribute, sublicense, and/or sell copies
+   of the Software, and to permit persons to whom the Software is
+   furnished to do so, subject to the following conditions:
 
-   The above copyright notice and this permission notice shall be included
-   in all copies or substantial portions of the Software.
+   The above copyright notice and this permission notice shall be
+   included in all copies or substantial portions of the Software.
 
    THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
    EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
@@ -57,7 +58,9 @@
 #endif
 
 /* Specify which architecture libffi is configured for. */
+#ifndef @TARGET@
 #define @TARGET@
+#endif
 
 /* ---- System configuration information --------------------------------- */
 
@@ -75,15 +78,31 @@
 /* LONG_LONG_MAX is not always defined (not if STRICT_ANSI, for example).
    But we can find it either under the correct ANSI name, or under GNU
    C's internal name.  */
+
+#define FFI_64_BIT_MAX 9223372036854775807
+
 #ifdef LONG_LONG_MAX
 # define FFI_LONG_LONG_MAX LONG_LONG_MAX
 #else
 # ifdef LLONG_MAX
 #  define FFI_LONG_LONG_MAX LLONG_MAX
+#  ifdef _AIX52 /* or newer has C99 LLONG_MAX */
+#   undef FFI_64_BIT_MAX
+#   define FFI_64_BIT_MAX 9223372036854775807LL
+#  endif /* _AIX52 or newer */
 # else
 #  ifdef __GNUC__
 #   define FFI_LONG_LONG_MAX __LONG_LONG_MAX__
 #  endif
+#  ifdef _AIX /* AIX 5.1 and earlier have LONGLONG_MAX */
+#   ifndef __PPC64__
+#    if defined (__IBMC__) || defined (__IBMCPP__)
+#     define FFI_LONG_LONG_MAX LONGLONG_MAX
+#    endif
+#   endif /* __PPC64__ */
+#   undef  FFI_64_BIT_MAX
+#   define FFI_64_BIT_MAX 9223372036854775807LL
+#  endif
 # endif
 #endif
 
@@ -130,39 +149,53 @@
 #endif
 
 #if LONG_MAX == 2147483647
-# if FFI_LONG_LONG_MAX != 9223372036854775807
+# if FFI_LONG_LONG_MAX != FFI_64_BIT_MAX
  #error "no 64-bit data type supported"
 # endif
-#elif LONG_MAX != 9223372036854775807
+#elif LONG_MAX != FFI_64_BIT_MAX
  #error "long size not supported"
 #endif
 
 #if LONG_MAX == 2147483647
 # define ffi_type_ulong        ffi_type_uint32
 # define ffi_type_slong        ffi_type_sint32
-#elif LONG_MAX == 9223372036854775807
+#elif LONG_MAX == FFI_64_BIT_MAX
 # define ffi_type_ulong        ffi_type_uint64
 # define ffi_type_slong        ffi_type_sint64
 #else
  #error "long size not supported"
 #endif
 
+/* Need minimal decorations for DLLs to works on Windows. */
+/* GCC has autoimport and autoexport.  Rely on Libtool to */
+/* help MSVC export from a DLL, but always declare data   */
+/* to be imported for MSVC clients.  This costs an extra  */
+/* indirection for MSVC clients using the static version  */
+/* of the library, but don't worry about that.  Besides,  */
+/* as a workaround, they can define FFI_BUILDING if they  */
+/* *know* they are going to link with the static library. */
+#if defined _MSC_VER && !defined FFI_BUILDING
+#define FFI_EXTERN extern __declspec(dllimport)
+#else
+#define FFI_EXTERN extern
+#endif
+
 /* These are defined in types.c */
-extern ffi_type ffi_type_void;
-extern ffi_type ffi_type_uint8;
-extern ffi_type ffi_type_sint8;
-extern ffi_type ffi_type_uint16;
-extern ffi_type ffi_type_sint16;
-extern ffi_type ffi_type_uint32;
-extern ffi_type ffi_type_sint32;
-extern ffi_type ffi_type_uint64;
-extern ffi_type ffi_type_sint64;
-extern ffi_type ffi_type_float;
-extern ffi_type ffi_type_double;
-extern ffi_type ffi_type_pointer;
+FFI_EXTERN ffi_type ffi_type_void;
+FFI_EXTERN ffi_type ffi_type_uint8;
+FFI_EXTERN ffi_type ffi_type_sint8;
+FFI_EXTERN ffi_type ffi_type_uint16;
+FFI_EXTERN ffi_type ffi_type_sint16;
+FFI_EXTERN ffi_type ffi_type_uint32;
+FFI_EXTERN ffi_type ffi_type_sint32;
+FFI_EXTERN ffi_type ffi_type_uint64;
+FFI_EXTERN ffi_type ffi_type_sint64;
+FFI_EXTERN ffi_type ffi_type_float;
+FFI_EXTERN ffi_type ffi_type_double;
+FFI_EXTERN ffi_type ffi_type_pointer;
 
 #if @HAVE_LONG_DOUBLE@
-extern ffi_type ffi_type_longdouble;
+FFI_EXTERN ffi_type ffi_type_longdouble;
 #else
 #define ffi_type_longdouble ffi_type_double
 #endif
@@ -188,12 +221,21 @@
 #endif
 } ffi_cif;
 
+/* Used internally, but overridden by some architectures */
+ffi_status ffi_prep_cif_core(ffi_cif *cif,
+			     ffi_abi abi,
+			     unsigned int isvariadic,
+			     unsigned int nfixedargs,
+			     unsigned int ntotalargs,
+			     ffi_type *rtype,
+			     ffi_type **atypes);
+
 /* ---- Definitions for the raw API -------------------------------------- */
 
 #ifndef FFI_SIZEOF_ARG
 # if LONG_MAX == 2147483647
 #  define FFI_SIZEOF_ARG        4
-# elif LONG_MAX == 9223372036854775807
+# elif LONG_MAX == FFI_64_BIT_MAX
 #  define FFI_SIZEOF_ARG        8
 # endif
 #endif
@@ -255,7 +297,12 @@
 __declspec(align(8))
 #endif
 typedef struct {
+#if @FFI_EXEC_TRAMPOLINE_TABLE@
+  void *trampoline_table;
+  void *trampoline_table_entry;
+#else
   char tramp[FFI_TRAMPOLINE_SIZE];
+#endif
   ffi_cif   *cif;
   void     (*fun)(ffi_cif*,void*,void**,void*);
   void      *user_data;
@@ -263,6 +310,9 @@
 } ffi_closure __attribute__((aligned (8)));
 #else
 } ffi_closure;
+# ifdef __sgi
+#  pragma pack 0
+# endif
 #endif
 
 void *ffi_closure_alloc (size_t size, void **code);
@@ -281,9 +331,16 @@
 		      void *user_data,
 		      void*codeloc);
 
+#ifdef __sgi
+# pragma pack 8
+#endif
 typedef struct {
+#if @FFI_EXEC_TRAMPOLINE_TABLE@
+  void *trampoline_table;
+  void *trampoline_table_entry;
+#else
   char tramp[FFI_TRAMPOLINE_SIZE];
-
+#endif
   ffi_cif   *cif;
 
 #if !FFI_NATIVE_RAW_API
@@ -303,7 +360,12 @@
 } ffi_raw_closure;
 
 typedef struct {
+#if @FFI_EXEC_TRAMPOLINE_TABLE@
+  void *trampoline_table;
+  void *trampoline_table_entry;
+#else
   char tramp[FFI_TRAMPOLINE_SIZE];
+#endif
 
   ffi_cif   *cif;
 
@@ -359,6 +421,13 @@
 			ffi_type *rtype,
 			ffi_type **atypes);
 
+ffi_status ffi_prep_cif_var(ffi_cif *cif,
+			    ffi_abi abi,
+			    unsigned int nfixedargs,
+			    unsigned int ntotalargs,
+			    ffi_type *rtype,
+			    ffi_type **atypes);
+
 void ffi_call(ffi_cif *cif,
 	      void (*fn)(void),
 	      void *rvalue,
diff --git a/Modules/_ctypes/libffi/include/ffi_common.h b/Modules/_ctypes/libffi/include/ffi_common.h
index 42cace9..650ca69 100644
--- a/Modules/_ctypes/libffi/include/ffi_common.h
+++ b/Modules/_ctypes/libffi/include/ffi_common.h
@@ -1,7 +1,8 @@
 /* -----------------------------------------------------------------------
-   ffi_common.h - Copyright (c) 1996  Red Hat, Inc.
-   Copyright (C) 2007 Free Software Foundation, Inc
-
+   ffi_common.h - Copyright (C) 2011, 2012  Anthony Green
+                  Copyright (C) 2007  Free Software Foundation, Inc
+                  Copyright (c) 1996  Red Hat, Inc.
+                  
    Common internal definitions and macros. Only necessary for building
    libffi.
    ----------------------------------------------------------------------- */
@@ -74,6 +75,8 @@
 
 /* Perform machine dependent cif processing */
 ffi_status ffi_prep_cif_machdep(ffi_cif *cif);
+ffi_status ffi_prep_cif_machdep_var(ffi_cif *cif,
+	 unsigned int nfixedargs, unsigned int ntotalargs);
 
 /* Extended cif, used in callback from assembly routine */
 typedef struct
@@ -84,7 +87,7 @@
 } extended_cif;
 
 /* Terse sized type definitions.  */
-#if defined(_MSC_VER) || defined(__sgi)
+#if defined(_MSC_VER) || defined(__sgi) || defined(__SUNPRO_C)
 typedef unsigned char UINT8;
 typedef signed char   SINT8;
 typedef unsigned short UINT16;
@@ -112,11 +115,14 @@
 
 typedef float FLOAT32;
 
+#ifndef __GNUC__
+#define __builtin_expect(x, expected_value) (x)
+#endif
+#define LIKELY(x)    __builtin_expect(!!(x),1)
+#define UNLIKELY(x)  __builtin_expect((x)!=0,0)
 
 #ifdef __cplusplus
 }
 #endif
 
 #endif
-
-
diff --git a/Modules/_ctypes/libffi/install-sh b/Modules/_ctypes/libffi/install-sh
index 6ebe46d..6781b98 100755
--- a/Modules/_ctypes/libffi/install-sh
+++ b/Modules/_ctypes/libffi/install-sh
@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2004-12-17.09
+scriptversion=2009-04-28.21; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -39,38 +39,68 @@
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
+# from scratch.
+
+nl='
+'
+IFS=" ""	$nl"
 
 # set DOITPROG to echo to test this script
 
 # Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
+doit=${DOITPROG-}
+if test -z "$doit"; then
+  doit_exec=exec
+else
+  doit_exec=$doit
+fi
 
-# put in absolute paths if you don't have them in your path; or use env. vars.
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
 
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
 
-chmodcmd="$chmodprog 0755"
-chowncmd=
+posix_glob='?'
+initialize_posix_glob='
+  test "$posix_glob" != "?" || {
+    if (set -f) 2>/dev/null; then
+      posix_glob=
+    else
+      posix_glob=:
+    fi
+  }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
 chgrpcmd=
-stripcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
 rmcmd="$rmprog -f"
-mvcmd="$mvprog"
+stripcmd=
+
 src=
 dst=
 dir_arg=
-dstarg=
+dst_arg=
+
+copy_on_change=false
 no_target_directory=
 
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
    or: $0 [OPTION]... SRCFILES... DIRECTORY
    or: $0 [OPTION]... -t DIRECTORY SRCFILES...
    or: $0 [OPTION]... -d DIRECTORIES...
@@ -80,81 +110,86 @@
 In the 4th, create DIRECTORIES.
 
 Options:
--c         (ignored)
--d         create directories instead of installing files.
--g GROUP   $chgrpprog installed files to GROUP.
--m MODE    $chmodprog installed files to MODE.
--o USER    $chownprog installed files to USER.
--s         $stripprog installed files.
--t DIRECTORY  install into DIRECTORY.
--T         report an error if DSTFILE is a directory.
---help     display this help and exit.
---version  display version info and exit.
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
 
 Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
 "
 
-while test -n "$1"; do
+while test $# -ne 0; do
   case $1 in
-    -c) shift
-        continue;;
+    -c) ;;
 
-    -d) dir_arg=true
-        shift
-        continue;;
+    -C) copy_on_change=true;;
+
+    -d) dir_arg=true;;
 
     -g) chgrpcmd="$chgrpprog $2"
-        shift
-        shift
-        continue;;
+	shift;;
 
-    --help) echo "$usage"; exit 0;;
+    --help) echo "$usage"; exit $?;;
 
-    -m) chmodcmd="$chmodprog $2"
-        shift
-        shift
-        continue;;
+    -m) mode=$2
+	case $mode in
+	  *' '* | *'	'* | *'
+'*	  | *'*'* | *'?'* | *'['*)
+	    echo "$0: invalid mode: $mode" >&2
+	    exit 1;;
+	esac
+	shift;;
 
     -o) chowncmd="$chownprog $2"
-        shift
-        shift
-        continue;;
+	shift;;
 
-    -s) stripcmd=$stripprog
-        shift
-        continue;;
+    -s) stripcmd=$stripprog;;
 
-    -t) dstarg=$2
-	shift
-	shift
-	continue;;
+    -t) dst_arg=$2
+	shift;;
 
-    -T) no_target_directory=true
-	shift
-	continue;;
+    -T) no_target_directory=true;;
 
-    --version) echo "$0 $scriptversion"; exit 0;;
+    --version) echo "$0 $scriptversion"; exit $?;;
 
-    *)  # When -d is used, all remaining arguments are directories to create.
-	# When -t is used, the destination is already specified.
-	test -n "$dir_arg$dstarg" && break
-        # Otherwise, the last argument is the destination.  Remove it from $@.
-	for arg
-	do
-          if test -n "$dstarg"; then
-	    # $@ is not empty: it contains at least $arg.
-	    set fnord "$@" "$dstarg"
-	    shift # fnord
-	  fi
-	  shift # arg
-	  dstarg=$arg
-	done
+    --)	shift
 	break;;
+
+    -*)	echo "$0: invalid option: $1" >&2
+	exit 1;;
+
+    *)  break;;
   esac
+  shift
 done
 
-if test -z "$1"; then
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+  done
+fi
+
+if test $# -eq 0; then
   if test -z "$dir_arg"; then
     echo "$0: no input file specified." >&2
     exit 1
@@ -164,24 +199,47 @@
   exit 0
 fi
 
+if test -z "$dir_arg"; then
+  trap '(exit $?); exit' 1 2 13 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
 for src
 do
   # Protect names starting with `-'.
   case $src in
-    -*) src=./$src ;;
+    -*) src=./$src;;
   esac
 
   if test -n "$dir_arg"; then
     dst=$src
-    src=
-
-    if test -d "$dst"; then
-      mkdircmd=:
-      chmodcmd=
-    else
-      mkdircmd=$mkdirprog
-    fi
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
   else
+
     # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
     # might cause directories to be created, which would be especially bad
     # if $src (and thus $dsttmp) contains '*'.
@@ -190,71 +248,199 @@
       exit 1
     fi
 
-    if test -z "$dstarg"; then
+    if test -z "$dst_arg"; then
       echo "$0: no destination specified." >&2
       exit 1
     fi
 
-    dst=$dstarg
+    dst=$dst_arg
     # Protect names starting with `-'.
     case $dst in
-      -*) dst=./$dst ;;
+      -*) dst=./$dst;;
     esac
 
     # If destination is a directory, append the input filename; won't work
     # if double slashes aren't ignored.
     if test -d "$dst"; then
       if test -n "$no_target_directory"; then
-	echo "$0: $dstarg: Is a directory" >&2
+	echo "$0: $dst_arg: Is a directory" >&2
 	exit 1
       fi
-      dst=$dst/`basename "$src"`
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
+    else
+      # Prefer dirname, but fall back on a substitute if dirname fails.
+      dstdir=`
+	(dirname "$dst") 2>/dev/null ||
+	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	     X"$dst" : 'X\(//\)[^/]' \| \
+	     X"$dst" : 'X\(//\)$' \| \
+	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+	echo X"$dst" |
+	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)[^/].*/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\).*/{
+		   s//\1/
+		   q
+		 }
+		 s/.*/./; q'
+      `
+
+      test -d "$dstdir"
+      dstdir_status=$?
     fi
   fi
 
-  # This sed command emulates the dirname command.
-  dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
+  obsolete_mkdir_used=false
 
-  # Make sure that the destination directory exists.
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+	# Create intermediate dirs using mode 755 as modified by the umask.
+	# This is like FreeBSD 'install' as of 1997-10-28.
+	umask=`umask`
+	case $stripcmd.$umask in
+	  # Optimize common cases.
+	  *[2367][2367]) mkdir_umask=$umask;;
+	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
 
-  # Skip lots of stat calls in the usual case.
-  if test ! -d "$dstdir"; then
-    defaultIFS='
-	 '
-    IFS="${IFS-$defaultIFS}"
+	  *[0-7])
+	    mkdir_umask=`expr $umask + 22 \
+	      - $umask % 100 % 40 + $umask % 20 \
+	      - $umask % 10 % 4 + $umask % 2
+	    `;;
+	  *) mkdir_umask=$umask,go-w;;
+	esac
 
-    oIFS=$IFS
-    # Some sh's can't handle IFS=/ for some reason.
-    IFS='%'
-    set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
-    shift
-    IFS=$oIFS
+	# With -d, create the new directory with the user-specified mode.
+	# Otherwise, rely on $mkdir_umask.
+	if test -n "$dir_arg"; then
+	  mkdir_mode=-m$mode
+	else
+	  mkdir_mode=
+	fi
 
-    pathcomp=
+	posix_mkdir=false
+	case $umask in
+	  *[123567][0-7][0-7])
+	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
+	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+	    ;;
+	  *)
+	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
 
-    while test $# -ne 0 ; do
-      pathcomp=$pathcomp$1
+	    if (umask $mkdir_umask &&
+		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+	    then
+	      if test -z "$dir_arg" || {
+		   # Check for POSIX incompatibilities with -m.
+		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+		   # other-writeable bit of parent directory when it shouldn't.
+		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+		   case $ls_ld_tmpdir in
+		     d????-?r-*) different_mode=700;;
+		     d????-?--*) different_mode=755;;
+		     *) false;;
+		   esac &&
+		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+		   }
+		 }
+	      then posix_mkdir=:
+	      fi
+	      rmdir "$tmpdir/d" "$tmpdir"
+	    else
+	      # Remove any dirs left behind by ancient mkdir implementations.
+	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+	    fi
+	    trap '' 0;;
+	esac;;
+    esac
+
+    if
+      $posix_mkdir && (
+	umask $mkdir_umask &&
+	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+	/*) prefix='/';;
+	-*) prefix='./';;
+	*)  prefix='';;
+      esac
+
+      eval "$initialize_posix_glob"
+
+      oIFS=$IFS
+      IFS=/
+      $posix_glob set -f
+      set fnord $dstdir
       shift
-      if test ! -d "$pathcomp"; then
-        $mkdirprog "$pathcomp"
-	# mkdir can fail with a `File exist' error in case several
-	# install-sh are creating the directory concurrently.  This
-	# is OK.
-	test -d "$pathcomp" || exit
+      $posix_glob set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+	test -z "$d" && continue
+
+	prefix=$prefix$d
+	if test -d "$prefix"; then
+	  prefixes=
+	else
+	  if $posix_mkdir; then
+	    (umask=$mkdir_umask &&
+	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+	    # Don't fail if two instances are running concurrently.
+	    test -d "$prefix" || exit 1
+	  else
+	    case $prefix in
+	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+	      *) qprefix=$prefix;;
+	    esac
+	    prefixes="$prefixes '$qprefix'"
+	  fi
+	fi
+	prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+	# Don't fail if two instances are running concurrently.
+	(umask $mkdir_umask &&
+	 eval "\$doit_exec \$mkdirprog $prefixes") ||
+	  test -d "$dstdir" || exit 1
+	obsolete_mkdir_used=true
       fi
-      pathcomp=$pathcomp/
-    done
+    fi
   fi
 
   if test -n "$dir_arg"; then
-    $doit $mkdircmd "$dst" \
-      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
-
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
   else
-    dstfile=`basename "$dst"`
 
     # Make a couple of temp file names in the proper directory.
     dsttmp=$dstdir/_inst.$$_
@@ -262,10 +448,9 @@
 
     # Trap to clean up those temp files at exit.
     trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-    trap '(exit $?); exit' 1 2 13 15
 
     # Copy the file name to the temp name.
-    $doit $cpprog "$src" "$dsttmp" &&
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
 
     # and set any options; do chmod last to preserve setuid bits.
     #
@@ -273,51 +458,63 @@
     # ignore errors from any of these, just make sure not to ignore
     # errors from the above "$doit $cpprog $src $dsttmp" command.
     #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
 
-    # Now rename the file to the real destination.
-    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
-      || {
-	   # The rename failed, perhaps because mv can't rename something else
-	   # to itself, or perhaps because mv is so ancient that it does not
-	   # support -f.
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
 
-	   # Now remove or move aside any old file at destination location.
-	   # We try this two ways since rm can't unlink itself on some
-	   # systems and the destination file might be busy for other
-	   # reasons.  In this case, the final cleanup might fail but the new
-	   # file should still install successfully.
-	   {
-	     if test -f "$dstdir/$dstfile"; then
-	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
-	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
-	       || {
-		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
-		 (exit 1); exit 1
-	       }
-	     else
-	       :
-	     fi
-	   } &&
+       eval "$initialize_posix_glob" &&
+       $posix_glob set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       $posix_glob set +f &&
 
-	   # Now rename the file to the real destination.
-	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
-	 }
-    }
-  fi || { (exit 1); exit 1; }
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+	# Now remove or move aside any old file at destination location.
+	# We try this two ways since rm can't unlink itself on some
+	# systems and the destination file might be busy for other
+	# reasons.  In this case, the final cleanup might fail but the new
+	# file should still install successfully.
+	{
+	  test ! -f "$dst" ||
+	  $doit $rmcmd -f "$dst" 2>/dev/null ||
+	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+	  } ||
+	  { echo "$0: cannot unlink or rename $dst" >&2
+	    (exit 1); exit 1
+	  }
+	} &&
+
+	# Now rename the file to the real destination.
+	$doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
+
+    trap '' 0
+  fi
 done
 
-# The final little trick to "correctly" pass the exit status to the exit trap.
-{
-  (exit 0); exit 0
-}
-
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End:
diff --git a/Modules/_ctypes/libffi/libffi.xcodeproj/project.pbxproj b/Modules/_ctypes/libffi/libffi.xcodeproj/project.pbxproj
new file mode 100644
index 0000000..14c39a2
--- /dev/null
+++ b/Modules/_ctypes/libffi/libffi.xcodeproj/project.pbxproj
@@ -0,0 +1,579 @@
+// !$*UTF8*$!
+{
+	archiveVersion = 1;
+	classes = {
+	};
+	objectVersion = 46;
+	objects = {
+
+/* Begin PBXBuildFile section */
+		6C43CBDC1534F76F00162364 /* ffi.c in Sources */ = {isa = PBXBuildFile; fileRef = 6C43CBBD1534F76F00162364 /* ffi.c */; };
+		6C43CBDD1534F76F00162364 /* sysv.S in Sources */ = {isa = PBXBuildFile; fileRef = 6C43CBBF1534F76F00162364 /* sysv.S */; };
+		6C43CBDE1534F76F00162364 /* trampoline.S in Sources */ = {isa = PBXBuildFile; fileRef = 6C43CBC01534F76F00162364 /* trampoline.S */; };
+		6C43CBE61534F76F00162364 /* darwin.S in Sources */ = {isa = PBXBuildFile; fileRef = 6C43CBC91534F76F00162364 /* darwin.S */; };
+		6C43CBE81534F76F00162364 /* ffi.c in Sources */ = {isa = PBXBuildFile; fileRef = 6C43CBCB1534F76F00162364 /* ffi.c */; };
+		6C43CC1F1534F77800162364 /* darwin.S in Sources */ = {isa = PBXBuildFile; fileRef = 6C43CC051534F77800162364 /* darwin.S */; };
+		6C43CC201534F77800162364 /* darwin64.S in Sources */ = {isa = PBXBuildFile; fileRef = 6C43CC061534F77800162364 /* darwin64.S */; };
+		6C43CC211534F77800162364 /* ffi.c in Sources */ = {isa = PBXBuildFile; fileRef = 6C43CC071534F77800162364 /* ffi.c */; };
+		6C43CC221534F77800162364 /* ffi64.c in Sources */ = {isa = PBXBuildFile; fileRef = 6C43CC081534F77800162364 /* ffi64.c */; };
+		6C43CC2F1534F7BE00162364 /* closures.c in Sources */ = {isa = PBXBuildFile; fileRef = 6C43CC281534F7BE00162364 /* closures.c */; };
+		6C43CC301534F7BE00162364 /* closures.c in Sources */ = {isa = PBXBuildFile; fileRef = 6C43CC281534F7BE00162364 /* closures.c */; };
+		6C43CC351534F7BE00162364 /* java_raw_api.c in Sources */ = {isa = PBXBuildFile; fileRef = 6C43CC2B1534F7BE00162364 /* java_raw_api.c */; };
+		6C43CC361534F7BE00162364 /* java_raw_api.c in Sources */ = {isa = PBXBuildFile; fileRef = 6C43CC2B1534F7BE00162364 /* java_raw_api.c */; };
+		6C43CC371534F7BE00162364 /* prep_cif.c in Sources */ = {isa = PBXBuildFile; fileRef = 6C43CC2C1534F7BE00162364 /* prep_cif.c */; };
+		6C43CC381534F7BE00162364 /* prep_cif.c in Sources */ = {isa = PBXBuildFile; fileRef = 6C43CC2C1534F7BE00162364 /* prep_cif.c */; };
+		6C43CC391534F7BE00162364 /* raw_api.c in Sources */ = {isa = PBXBuildFile; fileRef = 6C43CC2D1534F7BE00162364 /* raw_api.c */; };
+		6C43CC3A1534F7BE00162364 /* raw_api.c in Sources */ = {isa = PBXBuildFile; fileRef = 6C43CC2D1534F7BE00162364 /* raw_api.c */; };
+		6C43CC3B1534F7BE00162364 /* types.c in Sources */ = {isa = PBXBuildFile; fileRef = 6C43CC2E1534F7BE00162364 /* types.c */; };
+		6C43CC3C1534F7BE00162364 /* types.c in Sources */ = {isa = PBXBuildFile; fileRef = 6C43CC2E1534F7BE00162364 /* types.c */; };
+		6C43CC971535032600162364 /* ffi.h in Headers */ = {isa = PBXBuildFile; fileRef = 6C43CC8D1535032600162364 /* ffi.h */; settings = {ATTRIBUTES = (Public, ); }; };
+		6C43CC981535032600162364 /* ffi_common.h in Headers */ = {isa = PBXBuildFile; fileRef = 6C43CC8E1535032600162364 /* ffi_common.h */; settings = {ATTRIBUTES = (Public, ); }; };
+		6C43CC991535032600162364 /* ffi_i386.h in Headers */ = {isa = PBXBuildFile; fileRef = 6C43CC8F1535032600162364 /* ffi_i386.h */; settings = {ATTRIBUTES = (Public, ); }; };
+		6C43CC9A1535032600162364 /* ffi_x86_64.h in Headers */ = {isa = PBXBuildFile; fileRef = 6C43CC901535032600162364 /* ffi_x86_64.h */; settings = {ATTRIBUTES = (Public, ); }; };
+		6C43CC9B1535032600162364 /* fficonfig.h in Headers */ = {isa = PBXBuildFile; fileRef = 6C43CC911535032600162364 /* fficonfig.h */; };
+		6C43CC9C1535032600162364 /* fficonfig_i386.h in Headers */ = {isa = PBXBuildFile; fileRef = 6C43CC921535032600162364 /* fficonfig_i386.h */; };
+		6C43CC9D1535032600162364 /* fficonfig_x86_64.h in Headers */ = {isa = PBXBuildFile; fileRef = 6C43CC931535032600162364 /* fficonfig_x86_64.h */; };
+		6C43CC9E1535032600162364 /* ffitarget.h in Headers */ = {isa = PBXBuildFile; fileRef = 6C43CC941535032600162364 /* ffitarget.h */; settings = {ATTRIBUTES = (Public, ); }; };
+		6C43CC9F1535032600162364 /* ffitarget_i386.h in Headers */ = {isa = PBXBuildFile; fileRef = 6C43CC951535032600162364 /* ffitarget_i386.h */; settings = {ATTRIBUTES = (Public, ); }; };
+		6C43CCA01535032600162364 /* ffitarget_x86_64.h in Headers */ = {isa = PBXBuildFile; fileRef = 6C43CC961535032600162364 /* ffitarget_x86_64.h */; settings = {ATTRIBUTES = (Public, ); }; };
+		6C43CCAD1535039600162364 /* ffi.h in Headers */ = {isa = PBXBuildFile; fileRef = 6C43CCA21535039600162364 /* ffi.h */; settings = {ATTRIBUTES = (Public, ); }; };
+		6C43CCAE1535039600162364 /* ffi_armv7.h in Headers */ = {isa = PBXBuildFile; fileRef = 6C43CCA31535039600162364 /* ffi_armv7.h */; settings = {ATTRIBUTES = (Public, ); }; };
+		6C43CCAF1535039600162364 /* ffi_common.h in Headers */ = {isa = PBXBuildFile; fileRef = 6C43CCA41535039600162364 /* ffi_common.h */; settings = {ATTRIBUTES = (Public, ); }; };
+		6C43CCB01535039600162364 /* ffi_i386.h in Headers */ = {isa = PBXBuildFile; fileRef = 6C43CCA51535039600162364 /* ffi_i386.h */; settings = {ATTRIBUTES = (Public, ); }; };
+		6C43CCB11535039600162364 /* fficonfig.h in Headers */ = {isa = PBXBuildFile; fileRef = 6C43CCA61535039600162364 /* fficonfig.h */; };
+		6C43CCB21535039600162364 /* fficonfig_armv7.h in Headers */ = {isa = PBXBuildFile; fileRef = 6C43CCA71535039600162364 /* fficonfig_armv7.h */; };
+		6C43CCB31535039600162364 /* fficonfig_i386.h in Headers */ = {isa = PBXBuildFile; fileRef = 6C43CCA81535039600162364 /* fficonfig_i386.h */; };
+		6C43CCB41535039600162364 /* ffitarget.h in Headers */ = {isa = PBXBuildFile; fileRef = 6C43CCA91535039600162364 /* ffitarget.h */; settings = {ATTRIBUTES = (Public, ); }; };
+		6C43CCB51535039600162364 /* ffitarget_arm.h in Headers */ = {isa = PBXBuildFile; fileRef = 6C43CCAA1535039600162364 /* ffitarget_arm.h */; settings = {ATTRIBUTES = (Public, ); }; };
+		6C43CCB61535039600162364 /* ffitarget_armv7.h in Headers */ = {isa = PBXBuildFile; fileRef = 6C43CCAB1535039600162364 /* ffitarget_armv7.h */; settings = {ATTRIBUTES = (Public, ); }; };
+		6C43CCB71535039600162364 /* ffitarget_i386.h in Headers */ = {isa = PBXBuildFile; fileRef = 6C43CCAC1535039600162364 /* ffitarget_i386.h */; settings = {ATTRIBUTES = (Public, ); }; };
+/* End PBXBuildFile section */
+
+/* Begin PBXFileReference section */
+		6C43CB3D1534E9D100162364 /* libffi.a */ = {isa = PBXFileReference; explicitFileType = archive.ar; includeInIndex = 0; path = libffi.a; sourceTree = BUILT_PRODUCTS_DIR; };
+		6C43CBBD1534F76F00162364 /* ffi.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; path = ffi.c; sourceTree = "<group>"; };
+		6C43CBBF1534F76F00162364 /* sysv.S */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.asm; path = sysv.S; sourceTree = "<group>"; };
+		6C43CBC01534F76F00162364 /* trampoline.S */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.asm; path = trampoline.S; sourceTree = "<group>"; };
+		6C43CBC91534F76F00162364 /* darwin.S */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.asm; path = darwin.S; sourceTree = "<group>"; };
+		6C43CBCB1534F76F00162364 /* ffi.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; path = ffi.c; sourceTree = "<group>"; };
+		6C43CC051534F77800162364 /* darwin.S */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.asm; path = darwin.S; sourceTree = "<group>"; };
+		6C43CC061534F77800162364 /* darwin64.S */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.asm; path = darwin64.S; sourceTree = "<group>"; };
+		6C43CC071534F77800162364 /* ffi.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; path = ffi.c; sourceTree = "<group>"; };
+		6C43CC081534F77800162364 /* ffi64.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; path = ffi64.c; sourceTree = "<group>"; };
+		6C43CC281534F7BE00162364 /* closures.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = closures.c; path = src/closures.c; sourceTree = SOURCE_ROOT; };
+		6C43CC2B1534F7BE00162364 /* java_raw_api.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = java_raw_api.c; path = src/java_raw_api.c; sourceTree = SOURCE_ROOT; };
+		6C43CC2C1534F7BE00162364 /* prep_cif.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = prep_cif.c; path = src/prep_cif.c; sourceTree = SOURCE_ROOT; };
+		6C43CC2D1534F7BE00162364 /* raw_api.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = raw_api.c; path = src/raw_api.c; sourceTree = SOURCE_ROOT; };
+		6C43CC2E1534F7BE00162364 /* types.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; name = types.c; path = src/types.c; sourceTree = SOURCE_ROOT; };
+		6C43CC8D1535032600162364 /* ffi.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = ffi.h; sourceTree = "<group>"; };
+		6C43CC8E1535032600162364 /* ffi_common.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = ffi_common.h; sourceTree = "<group>"; };
+		6C43CC8F1535032600162364 /* ffi_i386.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = ffi_i386.h; sourceTree = "<group>"; };
+		6C43CC901535032600162364 /* ffi_x86_64.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = ffi_x86_64.h; sourceTree = "<group>"; };
+		6C43CC911535032600162364 /* fficonfig.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = fficonfig.h; sourceTree = "<group>"; };
+		6C43CC921535032600162364 /* fficonfig_i386.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = fficonfig_i386.h; sourceTree = "<group>"; };
+		6C43CC931535032600162364 /* fficonfig_x86_64.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = fficonfig_x86_64.h; sourceTree = "<group>"; };
+		6C43CC941535032600162364 /* ffitarget.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = ffitarget.h; sourceTree = "<group>"; };
+		6C43CC951535032600162364 /* ffitarget_i386.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = ffitarget_i386.h; sourceTree = "<group>"; };
+		6C43CC961535032600162364 /* ffitarget_x86_64.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = ffitarget_x86_64.h; sourceTree = "<group>"; };
+		6C43CCA21535039600162364 /* ffi.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = ffi.h; sourceTree = "<group>"; };
+		6C43CCA31535039600162364 /* ffi_armv7.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = ffi_armv7.h; sourceTree = "<group>"; };
+		6C43CCA41535039600162364 /* ffi_common.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = ffi_common.h; sourceTree = "<group>"; };
+		6C43CCA51535039600162364 /* ffi_i386.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = ffi_i386.h; sourceTree = "<group>"; };
+		6C43CCA61535039600162364 /* fficonfig.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = fficonfig.h; sourceTree = "<group>"; };
+		6C43CCA71535039600162364 /* fficonfig_armv7.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = fficonfig_armv7.h; sourceTree = "<group>"; };
+		6C43CCA81535039600162364 /* fficonfig_i386.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = fficonfig_i386.h; sourceTree = "<group>"; };
+		6C43CCA91535039600162364 /* ffitarget.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = ffitarget.h; sourceTree = "<group>"; };
+		6C43CCAA1535039600162364 /* ffitarget_arm.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = ffitarget_arm.h; sourceTree = "<group>"; };
+		6C43CCAB1535039600162364 /* ffitarget_armv7.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = ffitarget_armv7.h; sourceTree = "<group>"; };
+		6C43CCAC1535039600162364 /* ffitarget_i386.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = ffitarget_i386.h; sourceTree = "<group>"; };
+		F6F980BA147386130008F121 /* libffi.a */ = {isa = PBXFileReference; explicitFileType = archive.ar; includeInIndex = 0; path = libffi.a; sourceTree = BUILT_PRODUCTS_DIR; };
+/* End PBXFileReference section */
+
+/* Begin PBXFrameworksBuildPhase section */
+		6C43CB3A1534E9D100162364 /* Frameworks */ = {
+			isa = PBXFrameworksBuildPhase;
+			buildActionMask = 2147483647;
+			files = (
+			);
+			runOnlyForDeploymentPostprocessing = 0;
+		};
+		F6F980B7147386130008F121 /* Frameworks */ = {
+			isa = PBXFrameworksBuildPhase;
+			buildActionMask = 2147483647;
+			files = (
+			);
+			runOnlyForDeploymentPostprocessing = 0;
+		};
+/* End PBXFrameworksBuildPhase section */
+
+/* Begin PBXGroup section */
+		6C43CBAF1534F76F00162364 /* iOS */ = {
+			isa = PBXGroup;
+			children = (
+				6C43CCA11535039600162364 /* include */,
+				6C43CBBB1534F76F00162364 /* src */,
+			);
+			name = iOS;
+			path = ios;
+			sourceTree = "<group>";
+		};
+		6C43CBBB1534F76F00162364 /* src */ = {
+			isa = PBXGroup;
+			children = (
+				6C43CBC81534F76F00162364 /* x86 */,
+				6C43CBBC1534F76F00162364 /* arm */,
+			);
+			path = src;
+			sourceTree = "<group>";
+		};
+		6C43CBBC1534F76F00162364 /* arm */ = {
+			isa = PBXGroup;
+			children = (
+				6C43CBBD1534F76F00162364 /* ffi.c */,
+				6C43CBBF1534F76F00162364 /* sysv.S */,
+				6C43CBC01534F76F00162364 /* trampoline.S */,
+			);
+			path = arm;
+			sourceTree = "<group>";
+		};
+		6C43CBC81534F76F00162364 /* x86 */ = {
+			isa = PBXGroup;
+			children = (
+				6C43CBC91534F76F00162364 /* darwin.S */,
+				6C43CBCB1534F76F00162364 /* ffi.c */,
+			);
+			path = x86;
+			sourceTree = "<group>";
+		};
+		6C43CBF01534F77800162364 /* OS X */ = {
+			isa = PBXGroup;
+			children = (
+				6C43CC8C1535032600162364 /* include */,
+				6C43CBFC1534F77800162364 /* src */,
+			);
+			name = "OS X";
+			path = osx;
+			sourceTree = "<group>";
+		};
+		6C43CBFC1534F77800162364 /* src */ = {
+			isa = PBXGroup;
+			children = (
+				6C43CC041534F77800162364 /* x86 */,
+			);
+			path = src;
+			sourceTree = "<group>";
+		};
+		6C43CC041534F77800162364 /* x86 */ = {
+			isa = PBXGroup;
+			children = (
+				6C43CC051534F77800162364 /* darwin.S */,
+				6C43CC061534F77800162364 /* darwin64.S */,
+				6C43CC071534F77800162364 /* ffi.c */,
+				6C43CC081534F77800162364 /* ffi64.c */,
+			);
+			path = x86;
+			sourceTree = "<group>";
+		};
+		6C43CC3D1534F7C400162364 /* src */ = {
+			isa = PBXGroup;
+			children = (
+				6C43CC281534F7BE00162364 /* closures.c */,
+				6C43CC2B1534F7BE00162364 /* java_raw_api.c */,
+				6C43CC2C1534F7BE00162364 /* prep_cif.c */,
+				6C43CC2D1534F7BE00162364 /* raw_api.c */,
+				6C43CC2E1534F7BE00162364 /* types.c */,
+			);
+			name = src;
+			path = ios;
+			sourceTree = "<group>";
+		};
+		6C43CC8C1535032600162364 /* include */ = {
+			isa = PBXGroup;
+			children = (
+				6C43CC8D1535032600162364 /* ffi.h */,
+				6C43CC8E1535032600162364 /* ffi_common.h */,
+				6C43CC8F1535032600162364 /* ffi_i386.h */,
+				6C43CC901535032600162364 /* ffi_x86_64.h */,
+				6C43CC911535032600162364 /* fficonfig.h */,
+				6C43CC921535032600162364 /* fficonfig_i386.h */,
+				6C43CC931535032600162364 /* fficonfig_x86_64.h */,
+				6C43CC941535032600162364 /* ffitarget.h */,
+				6C43CC951535032600162364 /* ffitarget_i386.h */,
+				6C43CC961535032600162364 /* ffitarget_x86_64.h */,
+			);
+			path = include;
+			sourceTree = "<group>";
+		};
+		6C43CCA11535039600162364 /* include */ = {
+			isa = PBXGroup;
+			children = (
+				6C43CCA21535039600162364 /* ffi.h */,
+				6C43CCA31535039600162364 /* ffi_armv7.h */,
+				6C43CCA41535039600162364 /* ffi_common.h */,
+				6C43CCA51535039600162364 /* ffi_i386.h */,
+				6C43CCA61535039600162364 /* fficonfig.h */,
+				6C43CCA71535039600162364 /* fficonfig_armv7.h */,
+				6C43CCA81535039600162364 /* fficonfig_i386.h */,
+				6C43CCA91535039600162364 /* ffitarget.h */,
+				6C43CCAA1535039600162364 /* ffitarget_arm.h */,
+				6C43CCAB1535039600162364 /* ffitarget_armv7.h */,
+				6C43CCAC1535039600162364 /* ffitarget_i386.h */,
+			);
+			path = include;
+			sourceTree = "<group>";
+		};
+		F6B0839514721EE50031D8A1 = {
+			isa = PBXGroup;
+			children = (
+				6C43CC3D1534F7C400162364 /* src */,
+				6C43CBAF1534F76F00162364 /* iOS */,
+				6C43CBF01534F77800162364 /* OS X */,
+				F6F980C6147386260008F121 /* Products */,
+			);
+			sourceTree = "<group>";
+		};
+		F6F980C6147386260008F121 /* Products */ = {
+			isa = PBXGroup;
+			children = (
+				F6F980BA147386130008F121 /* libffi.a */,
+				6C43CB3D1534E9D100162364 /* libffi.a */,
+			);
+			name = Products;
+			path = ../..;
+			sourceTree = BUILT_PRODUCTS_DIR;
+		};
+/* End PBXGroup section */
+
+/* Begin PBXHeadersBuildPhase section */
+		6C43CB3B1534E9D100162364 /* Headers */ = {
+			isa = PBXHeadersBuildPhase;
+			buildActionMask = 2147483647;
+			files = (
+				6C43CC971535032600162364 /* ffi.h in Headers */,
+				6C43CC981535032600162364 /* ffi_common.h in Headers */,
+				6C43CC991535032600162364 /* ffi_i386.h in Headers */,
+				6C43CC9A1535032600162364 /* ffi_x86_64.h in Headers */,
+				6C43CC9E1535032600162364 /* ffitarget.h in Headers */,
+				6C43CC9F1535032600162364 /* ffitarget_i386.h in Headers */,
+				6C43CCA01535032600162364 /* ffitarget_x86_64.h in Headers */,
+				6C43CC9B1535032600162364 /* fficonfig.h in Headers */,
+				6C43CC9C1535032600162364 /* fficonfig_i386.h in Headers */,
+				6C43CC9D1535032600162364 /* fficonfig_x86_64.h in Headers */,
+			);
+			runOnlyForDeploymentPostprocessing = 0;
+		};
+		F6F980B8147386130008F121 /* Headers */ = {
+			isa = PBXHeadersBuildPhase;
+			buildActionMask = 2147483647;
+			files = (
+				6C43CCAD1535039600162364 /* ffi.h in Headers */,
+				6C43CCAE1535039600162364 /* ffi_armv7.h in Headers */,
+				6C43CCAF1535039600162364 /* ffi_common.h in Headers */,
+				6C43CCB01535039600162364 /* ffi_i386.h in Headers */,
+				6C43CCB41535039600162364 /* ffitarget.h in Headers */,
+				6C43CCB51535039600162364 /* ffitarget_arm.h in Headers */,
+				6C43CCB61535039600162364 /* ffitarget_armv7.h in Headers */,
+				6C43CCB71535039600162364 /* ffitarget_i386.h in Headers */,
+				6C43CCB11535039600162364 /* fficonfig.h in Headers */,
+				6C43CCB21535039600162364 /* fficonfig_armv7.h in Headers */,
+				6C43CCB31535039600162364 /* fficonfig_i386.h in Headers */,
+			);
+			runOnlyForDeploymentPostprocessing = 0;
+		};
+/* End PBXHeadersBuildPhase section */
+
+/* Begin PBXNativeTarget section */
+		6C43CB3C1534E9D100162364 /* libffi OS X */ = {
+			isa = PBXNativeTarget;
+			buildConfigurationList = 6C43CB4A1534E9D100162364 /* Build configuration list for PBXNativeTarget "libffi OS X" */;
+			buildPhases = (
+				6C43CC401534FF3B00162364 /* Generate Source and Headers */,
+				6C43CB391534E9D100162364 /* Sources */,
+				6C43CB3A1534E9D100162364 /* Frameworks */,
+				6C43CB3B1534E9D100162364 /* Headers */,
+			);
+			buildRules = (
+			);
+			dependencies = (
+			);
+			name = "libffi OS X";
+			productName = "ffi OS X";
+			productReference = 6C43CB3D1534E9D100162364 /* libffi.a */;
+			productType = "com.apple.product-type.library.static";
+		};
+		F6F980B9147386130008F121 /* libffi iOS */ = {
+			isa = PBXNativeTarget;
+			buildConfigurationList = F6F980C4147386130008F121 /* Build configuration list for PBXNativeTarget "libffi iOS" */;
+			buildPhases = (
+				6C43CC3E1534F8E200162364 /* Generate Trampoline */,
+				6C43CC3F1534FF1B00162364 /* Generate Source and Headers */,
+				F6F980B6147386130008F121 /* Sources */,
+				F6F980B7147386130008F121 /* Frameworks */,
+				F6F980B8147386130008F121 /* Headers */,
+			);
+			buildRules = (
+			);
+			dependencies = (
+			);
+			name = "libffi iOS";
+			productName = ffi;
+			productReference = F6F980BA147386130008F121 /* libffi.a */;
+			productType = "com.apple.product-type.library.static";
+		};
+/* End PBXNativeTarget section */
+
+/* Begin PBXProject section */
+		F6B0839714721EE50031D8A1 /* Project object */ = {
+			isa = PBXProject;
+			attributes = {
+				LastUpgradeCheck = 0430;
+			};
+			buildConfigurationList = F6B0839A14721EE50031D8A1 /* Build configuration list for PBXProject "libffi" */;
+			compatibilityVersion = "Xcode 3.2";
+			developmentRegion = English;
+			hasScannedForEncodings = 0;
+			knownRegions = (
+				en,
+			);
+			mainGroup = F6B0839514721EE50031D8A1;
+			productRefGroup = F6B0839514721EE50031D8A1;
+			projectDirPath = "";
+			projectRoot = "";
+			targets = (
+				F6F980B9147386130008F121 /* libffi iOS */,
+				6C43CB3C1534E9D100162364 /* libffi OS X */,
+			);
+		};
+/* End PBXProject section */
+
+/* Begin PBXShellScriptBuildPhase section */
+		6C43CC3E1534F8E200162364 /* Generate Trampoline */ = {
+			isa = PBXShellScriptBuildPhase;
+			buildActionMask = 2147483647;
+			files = (
+			);
+			inputPaths = (
+			);
+			name = "Generate Trampoline";
+			outputPaths = (
+			);
+			runOnlyForDeploymentPostprocessing = 0;
+			shellPath = /usr/bin/python;
+			shellScript = "import subprocess\nimport re\nimport os\nimport errno\nimport sys\n\ndef main():\n    with open('src/arm/trampoline.S', 'w') as tramp_out:\n        p = subprocess.Popen(['bash', 'src/arm/gentramp.sh'], stdout=tramp_out)\n        p.wait()\n\nif __name__ == '__main__':\n    main()";
+		};
+		6C43CC3F1534FF1B00162364 /* Generate Source and Headers */ = {
+			isa = PBXShellScriptBuildPhase;
+			buildActionMask = 2147483647;
+			files = (
+			);
+			inputPaths = (
+			);
+			name = "Generate Source and Headers";
+			outputPaths = (
+			);
+			runOnlyForDeploymentPostprocessing = 0;
+			shellPath = /bin/sh;
+			shellScript = "/usr/bin/python generate-ios-source-and-headers.py";
+		};
+		6C43CC401534FF3B00162364 /* Generate Source and Headers */ = {
+			isa = PBXShellScriptBuildPhase;
+			buildActionMask = 2147483647;
+			files = (
+			);
+			inputPaths = (
+			);
+			name = "Generate Source and Headers";
+			outputPaths = (
+			);
+			runOnlyForDeploymentPostprocessing = 0;
+			shellPath = /bin/sh;
+			shellScript = "/usr/bin/python generate-osx-source-and-headers.py";
+		};
+/* End PBXShellScriptBuildPhase section */
+
+/* Begin PBXSourcesBuildPhase section */
+		6C43CB391534E9D100162364 /* Sources */ = {
+			isa = PBXSourcesBuildPhase;
+			buildActionMask = 2147483647;
+			files = (
+				6C43CC1F1534F77800162364 /* darwin.S in Sources */,
+				6C43CC201534F77800162364 /* darwin64.S in Sources */,
+				6C43CC211534F77800162364 /* ffi.c in Sources */,
+				6C43CC221534F77800162364 /* ffi64.c in Sources */,
+				6C43CC301534F7BE00162364 /* closures.c in Sources */,
+				6C43CC361534F7BE00162364 /* java_raw_api.c in Sources */,
+				6C43CC381534F7BE00162364 /* prep_cif.c in Sources */,
+				6C43CC3A1534F7BE00162364 /* raw_api.c in Sources */,
+				6C43CC3C1534F7BE00162364 /* types.c in Sources */,
+			);
+			runOnlyForDeploymentPostprocessing = 0;
+		};
+		F6F980B6147386130008F121 /* Sources */ = {
+			isa = PBXSourcesBuildPhase;
+			buildActionMask = 2147483647;
+			files = (
+				6C43CBDC1534F76F00162364 /* ffi.c in Sources */,
+				6C43CBDD1534F76F00162364 /* sysv.S in Sources */,
+				6C43CBDE1534F76F00162364 /* trampoline.S in Sources */,
+				6C43CBE61534F76F00162364 /* darwin.S in Sources */,
+				6C43CBE81534F76F00162364 /* ffi.c in Sources */,
+				6C43CC2F1534F7BE00162364 /* closures.c in Sources */,
+				6C43CC351534F7BE00162364 /* java_raw_api.c in Sources */,
+				6C43CC371534F7BE00162364 /* prep_cif.c in Sources */,
+				6C43CC391534F7BE00162364 /* raw_api.c in Sources */,
+				6C43CC3B1534F7BE00162364 /* types.c in Sources */,
+			);
+			runOnlyForDeploymentPostprocessing = 0;
+		};
+/* End PBXSourcesBuildPhase section */
+
+/* Begin XCBuildConfiguration section */
+		6C43CB4B1534E9D100162364 /* Debug */ = {
+			isa = XCBuildConfiguration;
+			buildSettings = {
+				ARCHS = "$(ARCHS_STANDARD_32_64_BIT)";
+				DSTROOT = /tmp/ffi.dst;
+				FRAMEWORK_SEARCH_PATHS = (
+					"$(inherited)",
+					"\"$(SYSTEM_APPS_DIR)/Xcode.app/Contents/Developer/Library/Frameworks\"",
+				);
+				GCC_ENABLE_OBJC_EXCEPTIONS = YES;
+				GCC_VERSION = com.apple.compilers.llvm.clang.1_0;
+				GCC_WARN_64_TO_32_BIT_CONVERSION = YES;
+				GCC_WARN_UNINITIALIZED_AUTOS = YES;
+				MACOSX_DEPLOYMENT_TARGET = 10.6;
+				ONLY_ACTIVE_ARCH = YES;
+				PRODUCT_NAME = ffi;
+				SDKROOT = macosx;
+			};
+			name = Debug;
+		};
+		6C43CB4C1534E9D100162364 /* Release */ = {
+			isa = XCBuildConfiguration;
+			buildSettings = {
+				ARCHS = "$(ARCHS_STANDARD_32_64_BIT)";
+				DEBUG_INFORMATION_FORMAT = "dwarf-with-dsym";
+				DSTROOT = /tmp/ffi.dst;
+				FRAMEWORK_SEARCH_PATHS = (
+					"$(inherited)",
+					"\"$(SYSTEM_APPS_DIR)/Xcode.app/Contents/Developer/Library/Frameworks\"",
+				);
+				GCC_ENABLE_OBJC_EXCEPTIONS = YES;
+				GCC_VERSION = com.apple.compilers.llvm.clang.1_0;
+				GCC_WARN_64_TO_32_BIT_CONVERSION = YES;
+				GCC_WARN_UNINITIALIZED_AUTOS = YES;
+				MACOSX_DEPLOYMENT_TARGET = 10.6;
+				PRODUCT_NAME = ffi;
+				SDKROOT = macosx;
+			};
+			name = Release;
+		};
+		F6B083AB14721EE50031D8A1 /* Debug */ = {
+			isa = XCBuildConfiguration;
+			buildSettings = {
+				ALWAYS_SEARCH_USER_PATHS = NO;
+				ARCHS = "$(ARCHS_STANDARD_32_BIT)";
+				COPY_PHASE_STRIP = NO;
+				GCC_C_LANGUAGE_STANDARD = gnu99;
+				GCC_DYNAMIC_NO_PIC = NO;
+				GCC_OPTIMIZATION_LEVEL = 0;
+				GCC_PREPROCESSOR_DEFINITIONS = (
+					"DEBUG=1",
+					"$(inherited)",
+				);
+				GCC_SYMBOLS_PRIVATE_EXTERN = NO;
+				GCC_WARN_ABOUT_MISSING_PROTOTYPES = NO;
+				GCC_WARN_ABOUT_RETURN_TYPE = YES;
+				GCC_WARN_UNUSED_VALUE = NO;
+				GCC_WARN_UNUSED_VARIABLE = YES;
+				HEADER_SEARCH_PATHS = ios/include;
+				SDKROOT = iphoneos;
+			};
+			name = Debug;
+		};
+		F6B083AC14721EE50031D8A1 /* Release */ = {
+			isa = XCBuildConfiguration;
+			buildSettings = {
+				ALWAYS_SEARCH_USER_PATHS = NO;
+				ARCHS = "$(ARCHS_STANDARD_32_BIT)";
+				COPY_PHASE_STRIP = YES;
+				GCC_C_LANGUAGE_STANDARD = gnu99;
+				GCC_PREPROCESSOR_DEFINITIONS = "";
+				GCC_WARN_ABOUT_MISSING_PROTOTYPES = NO;
+				GCC_WARN_ABOUT_RETURN_TYPE = YES;
+				GCC_WARN_UNUSED_VALUE = NO;
+				GCC_WARN_UNUSED_VARIABLE = YES;
+				HEADER_SEARCH_PATHS = ios/include;
+				SDKROOT = iphoneos;
+				VALIDATE_PRODUCT = YES;
+			};
+			name = Release;
+		};
+		F6F980C2147386130008F121 /* Debug */ = {
+			isa = XCBuildConfiguration;
+			buildSettings = {
+				ARCHS = (
+					armv6,
+					armv7,
+				);
+				DSTROOT = /tmp/ffi.dst;
+				GCC_PRECOMPILE_PREFIX_HEADER = YES;
+				GCC_THUMB_SUPPORT = NO;
+				IPHONEOS_DEPLOYMENT_TARGET = 4.0;
+				OTHER_LDFLAGS = "-ObjC";
+				PRODUCT_NAME = ffi;
+				SKIP_INSTALL = YES;
+			};
+			name = Debug;
+		};
+		F6F980C3147386130008F121 /* Release */ = {
+			isa = XCBuildConfiguration;
+			buildSettings = {
+				ARCHS = (
+					armv6,
+					armv7,
+				);
+				DSTROOT = /tmp/ffi.dst;
+				GCC_PRECOMPILE_PREFIX_HEADER = YES;
+				GCC_THUMB_SUPPORT = NO;
+				IPHONEOS_DEPLOYMENT_TARGET = 4.0;
+				OTHER_LDFLAGS = "-ObjC";
+				PRODUCT_NAME = ffi;
+				SKIP_INSTALL = YES;
+			};
+			name = Release;
+		};
+/* End XCBuildConfiguration section */
+
+/* Begin XCConfigurationList section */
+		6C43CB4A1534E9D100162364 /* Build configuration list for PBXNativeTarget "libffi OS X" */ = {
+			isa = XCConfigurationList;
+			buildConfigurations = (
+				6C43CB4B1534E9D100162364 /* Debug */,
+				6C43CB4C1534E9D100162364 /* Release */,
+			);
+			defaultConfigurationIsVisible = 0;
+			defaultConfigurationName = Release;
+		};
+		F6B0839A14721EE50031D8A1 /* Build configuration list for PBXProject "libffi" */ = {
+			isa = XCConfigurationList;
+			buildConfigurations = (
+				F6B083AB14721EE50031D8A1 /* Debug */,
+				F6B083AC14721EE50031D8A1 /* Release */,
+			);
+			defaultConfigurationIsVisible = 0;
+			defaultConfigurationName = Release;
+		};
+		F6F980C4147386130008F121 /* Build configuration list for PBXNativeTarget "libffi iOS" */ = {
+			isa = XCConfigurationList;
+			buildConfigurations = (
+				F6F980C2147386130008F121 /* Debug */,
+				F6F980C3147386130008F121 /* Release */,
+			);
+			defaultConfigurationIsVisible = 0;
+			defaultConfigurationName = Release;
+		};
+/* End XCConfigurationList section */
+	};
+	rootObject = F6B0839714721EE50031D8A1 /* Project object */;
+}
diff --git a/Modules/_ctypes/libffi/libtool-ldflags b/Modules/_ctypes/libffi/libtool-ldflags
new file mode 100755
index 0000000..e32e37b
--- /dev/null
+++ b/Modules/_ctypes/libffi/libtool-ldflags
@@ -0,0 +1,106 @@
+#! /bin/sh
+
+# Script to translate LDFLAGS into a form suitable for use with libtool.
+
+# Copyright (C) 2005 Free Software Foundation, Inc.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, 
+# MA 02110-1301, USA. 
+
+# Contributed by CodeSourcery, LLC.
+
+# This script is designed to be used from a Makefile that uses libtool
+# to build libraries as follows: 
+#
+#   LTLDFLAGS = $(shell libtool-ldflags $(LDFLAGS))
+#
+# Then, use (LTLDFLAGS) in place of $(LDFLAGS) in your link line.
+
+# The output of the script.  This string is built up as we process the
+# arguments.
+result=
+prev_arg=
+
+for arg
+do
+    case $arg in
+	-f*|--*)
+	    # Libtool does not ascribe any special meaning options
+	    # that begin with -f or with a double-dash.  So, it will
+	    # think these options are linker options, and prefix them
+	    # with "-Wl,".  Then, the compiler driver will ignore the
+	    # options.  So, we prefix these options with -Xcompiler to
+	    # make clear to libtool that they are in fact compiler
+	    # options.
+	    case $prev_arg in
+		-Xpreprocessor|-Xcompiler|-Xlinker)
+		    # This option is already prefixed; don't prefix it again.
+		    ;;
+		*)
+		    result="$result -Xcompiler"
+		    ;;
+	    esac
+	    ;;
+	*)
+	    # We do not want to add -Xcompiler to other options because
+	    # that would prevent libtool itself from recognizing them.
+	    ;;
+    esac
+    prev_arg=$arg
+
+    # If $(LDFLAGS) is (say):
+    #   a "b'c d" e
+    # then the user expects that:
+    #   $(LD) $(LDFLAGS)
+    # will pass three arguments to $(LD):
+    #   1) a
+    #   2) b'c d
+    #   3) e
+    # We must ensure, therefore, that the arguments are appropriately
+    # quoted so that using:
+    #   libtool --mode=link ... $(LTLDFLAGS)
+    # will result in the same number of arguments being passed to
+    # libtool.   In other words, when this script was invoked, the shell 
+    # removed one level of quoting, present in $(LDFLAGS); we have to put 
+    # it back.
+
+    # Quote any embedded single quotes.
+    case $arg in
+	*"'"*)
+	    # The following command creates the script:
+	    #   1s,^X,,;s|'|'"'"'|g
+	    # which removes a leading X, and then quotes and embedded single
+	    # quotes.
+	    sed_script="1s,^X,,;s|'|'\"'\"'|g"
+	    # Add a leading "X" so that if $arg starts with a dash,
+	    # the echo command will not try to interpret the argument
+	    # as a command-line option.
+	    arg="X$arg"
+	    # Generate the quoted string.
+	    quoted_arg=`echo "$arg" | sed -e "$sed_script"`
+	    ;;
+	*)
+	    quoted_arg=$arg
+	    ;;
+    esac
+    # Surround the entire argument with single quotes.
+    quoted_arg="'"$quoted_arg"'" 
+
+    # Add it to the string.
+    result="$result $quoted_arg"
+done
+
+# Output the string we have built up.
+echo "$result"
diff --git a/Modules/_ctypes/libffi/libtool-version b/Modules/_ctypes/libffi/libtool-version
index b8b80e0..e784fc4 100644
--- a/Modules/_ctypes/libffi/libtool-version
+++ b/Modules/_ctypes/libffi/libtool-version
@@ -26,4 +26,4 @@
 #    release, then set age to 0.
 #
 # CURRENT:REVISION:AGE
-5:10:0
+6:1:0
diff --git a/Modules/_ctypes/libffi/ltmain.sh b/Modules/_ctypes/libffi/ltmain.sh
old mode 100755
new mode 100644
index 6939dcc..63ae69d
--- a/Modules/_ctypes/libffi/ltmain.sh
+++ b/Modules/_ctypes/libffi/ltmain.sh
@@ -1,9 +1,9 @@
-# Generated from ltmain.m4sh.
 
-# ltmain.sh (GNU libtool) 2.2.6
+# libtool (GNU libtool) 2.4.2
 # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
+# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
 # This is free software; see the source for copying conditions.  There is NO
 # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 
@@ -32,50 +32,57 @@
 #
 # Provide generalized library-building support services.
 #
-#     --config             show all configuration variables
-#     --debug              enable verbose shell tracing
-# -n, --dry-run            display commands without modifying any files
-#     --features           display basic configuration information and exit
-#     --mode=MODE          use operation mode MODE
-#     --preserve-dup-deps  don't remove duplicate dependency libraries
-#     --quiet, --silent    don't print informational messages
-#     --tag=TAG            use configuration variables from tag TAG
-# -v, --verbose            print informational messages (default)
-#     --version            print version information
-# -h, --help               print short or long help message
+#       --config             show all configuration variables
+#       --debug              enable verbose shell tracing
+#   -n, --dry-run            display commands without modifying any files
+#       --features           display basic configuration information and exit
+#       --mode=MODE          use operation mode MODE
+#       --preserve-dup-deps  don't remove duplicate dependency libraries
+#       --quiet, --silent    don't print informational messages
+#       --no-quiet, --no-silent
+#                            print informational messages (default)
+#       --no-warn            don't display warning messages
+#       --tag=TAG            use configuration variables from tag TAG
+#   -v, --verbose            print more informational messages than default
+#       --no-verbose         don't print the extra informational messages
+#       --version            print version information
+#   -h, --help, --help-all   print short, long, or detailed help message
 #
 # MODE must be one of the following:
 #
-#       clean              remove files from the build directory
-#       compile            compile a source file into a libtool object
-#       execute            automatically set library path, then run a program
-#       finish             complete the installation of libtool libraries
-#       install            install libraries or executables
-#       link               create a library or an executable
-#       uninstall          remove libraries from an installed directory
+#         clean              remove files from the build directory
+#         compile            compile a source file into a libtool object
+#         execute            automatically set library path, then run a program
+#         finish             complete the installation of libtool libraries
+#         install            install libraries or executables
+#         link               create a library or an executable
+#         uninstall          remove libraries from an installed directory
 #
-# MODE-ARGS vary depending on the MODE.
+# MODE-ARGS vary depending on the MODE.  When passed as first option,
+# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
 # Try `$progname --help --mode=MODE' for a more detailed description of MODE.
 #
 # When reporting a bug, please describe a test case to reproduce it and
 # include the following information:
 #
-#       host-triplet:	$host
-#       shell:		$SHELL
-#       compiler:		$LTCC
-#       compiler flags:		$LTCFLAGS
-#       linker:		$LD (gnu? $with_gnu_ld)
-#       $progname:		(GNU libtool) 2.2.6
-#       automake:		$automake_version
-#       autoconf:		$autoconf_version
+#         host-triplet:	$host
+#         shell:		$SHELL
+#         compiler:		$LTCC
+#         compiler flags:		$LTCFLAGS
+#         linker:		$LD (gnu? $with_gnu_ld)
+#         $progname:	(GNU libtool) 2.4.2
+#         automake:	$automake_version
+#         autoconf:	$autoconf_version
 #
 # Report bugs to <bug-libtool@gnu.org>.
+# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+# General help using GNU software: <http://www.gnu.org/gethelp/>.
 
-PROGRAM=ltmain.sh
+PROGRAM=libtool
 PACKAGE=libtool
-VERSION=2.2.6
+VERSION=2.4.2
 TIMESTAMP=""
-package_revision=1.3012
+package_revision=1.3337
 
 # Be Bourne compatible
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
@@ -91,10 +98,15 @@
 BIN_SH=xpg4; export BIN_SH # for Tru64
 DUALCASE=1; export DUALCASE # for MKS sh
 
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
 # NLS nuisances: We save the old values to restore during execute mode.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
 lt_user_locale=
 lt_safe_locale=
 for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
@@ -107,24 +119,28 @@
 	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
 	fi"
 done
+LC_ALL=C
+LANGUAGE=C
+export LANGUAGE LC_ALL
 
 $lt_unset CDPATH
 
 
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
 
 
 
 : ${CP="cp -f"}
-: ${ECHO="echo"}
-: ${EGREP="/bin/grep -E"}
-: ${FGREP="/bin/grep -F"}
-: ${GREP="/bin/grep"}
-: ${LN_S="ln -s"}
+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
 : ${MAKE="make"}
 : ${MKDIR="mkdir"}
 : ${MV="mv -f"}
 : ${RM="rm -f"}
-: ${SED="/bin/sed"}
 : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
 : ${Xsed="$SED -e 1s/^X//"}
 
@@ -144,6 +160,27 @@
 dirname="s,/[^/]*$,,"
 basename="s,^.*/,,"
 
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+    func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+    if test "X$func_dirname_result" = "X${1}"; then
+      func_dirname_result="${3}"
+    else
+      func_dirname_result="$func_dirname_result${2}"
+    fi
+} # func_dirname may be replaced by extended shell implementation
+
+
+# func_basename file
+func_basename ()
+{
+    func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+} # func_basename may be replaced by extended shell implementation
+
+
 # func_dirname_and_basename file append nondir_replacement
 # perform func_basename and func_dirname in a single function
 # call:
@@ -158,33 +195,183 @@
 # those functions but instead duplicate the functionality here.
 func_dirname_and_basename ()
 {
-  # Extract subdirectory from the argument.
-  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
-  if test "X$func_dirname_result" = "X${1}"; then
-    func_dirname_result="${3}"
-  else
-    func_dirname_result="$func_dirname_result${2}"
-  fi
-  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+    # Extract subdirectory from the argument.
+    func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
+    if test "X$func_dirname_result" = "X${1}"; then
+      func_dirname_result="${3}"
+    else
+      func_dirname_result="$func_dirname_result${2}"
+    fi
+    func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
+} # func_dirname_and_basename may be replaced by extended shell implementation
+
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+    case ${2} in
+      .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+      *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+    esac
+} # func_stripname may be replaced by extended shell implementation
+
+
+# These SED scripts presuppose an absolute path with a trailing slash.
+pathcar='s,^/\([^/]*\).*$,\1,'
+pathcdr='s,^/[^/]*,,'
+removedotparts=':dotsl
+		s@/\./@/@g
+		t dotsl
+		s,/\.$,/,'
+collapseslashes='s@/\{1,\}@/@g'
+finalslash='s,/*$,/,'
+
+# func_normal_abspath PATH
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+#             value returned in "$func_normal_abspath_result"
+func_normal_abspath ()
+{
+  # Start from root dir and reassemble the path.
+  func_normal_abspath_result=
+  func_normal_abspath_tpath=$1
+  func_normal_abspath_altnamespace=
+  case $func_normal_abspath_tpath in
+    "")
+      # Empty path, that just means $cwd.
+      func_stripname '' '/' "`pwd`"
+      func_normal_abspath_result=$func_stripname_result
+      return
+    ;;
+    # The next three entries are used to spot a run of precisely
+    # two leading slashes without using negated character classes;
+    # we take advantage of case's first-match behaviour.
+    ///*)
+      # Unusual form of absolute path, do nothing.
+    ;;
+    //*)
+      # Not necessarily an ordinary path; POSIX reserves leading '//'
+      # and for example Cygwin uses it to access remote file shares
+      # over CIFS/SMB, so we conserve a leading double slash if found.
+      func_normal_abspath_altnamespace=/
+    ;;
+    /*)
+      # Absolute path, do nothing.
+    ;;
+    *)
+      # Relative path, prepend $cwd.
+      func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+    ;;
+  esac
+  # Cancel out all the simple stuff to save iterations.  We also want
+  # the path to end with a slash for ease of parsing, so make sure
+  # there is one (and only one) here.
+  func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
+  while :; do
+    # Processed it all yet?
+    if test "$func_normal_abspath_tpath" = / ; then
+      # If we ascended to the root using ".." the result may be empty now.
+      if test -z "$func_normal_abspath_result" ; then
+        func_normal_abspath_result=/
+      fi
+      break
+    fi
+    func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$pathcar"`
+    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$pathcdr"`
+    # Figure out what to do with it
+    case $func_normal_abspath_tcomponent in
+      "")
+        # Trailing empty path component, ignore it.
+      ;;
+      ..)
+        # Parent dir; strip last assembled component from result.
+        func_dirname "$func_normal_abspath_result"
+        func_normal_abspath_result=$func_dirname_result
+      ;;
+      *)
+        # Actual path component, append it.
+        func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
+      ;;
+    esac
+  done
+  # Restore leading double-slash if one was found on entry.
+  func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
 }
 
-# Generated shell functions inserted here.
+# func_relative_path SRCDIR DSTDIR
+# generates a relative path from SRCDIR to DSTDIR, with a trailing
+# slash if non-empty, suitable for immediately appending a filename
+# without needing to append a separator.
+#             value returned in "$func_relative_path_result"
+func_relative_path ()
+{
+  func_relative_path_result=
+  func_normal_abspath "$1"
+  func_relative_path_tlibdir=$func_normal_abspath_result
+  func_normal_abspath "$2"
+  func_relative_path_tbindir=$func_normal_abspath_result
 
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
+  # Ascend the tree starting from libdir
+  while :; do
+    # check if we have found a prefix of bindir
+    case $func_relative_path_tbindir in
+      $func_relative_path_tlibdir)
+        # found an exact match
+        func_relative_path_tcancelled=
+        break
+        ;;
+      $func_relative_path_tlibdir*)
+        # found a matching prefix
+        func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+        func_relative_path_tcancelled=$func_stripname_result
+        if test -z "$func_relative_path_result"; then
+          func_relative_path_result=.
+        fi
+        break
+        ;;
+      *)
+        func_dirname $func_relative_path_tlibdir
+        func_relative_path_tlibdir=${func_dirname_result}
+        if test "x$func_relative_path_tlibdir" = x ; then
+          # Have to descend all the way to the root!
+          func_relative_path_result=../$func_relative_path_result
+          func_relative_path_tcancelled=$func_relative_path_tbindir
+          break
+        fi
+        func_relative_path_result=../$func_relative_path_result
+        ;;
+    esac
+  done
+
+  # Now calculate path; take care to avoid doubling-up slashes.
+  func_stripname '' '/' "$func_relative_path_result"
+  func_relative_path_result=$func_stripname_result
+  func_stripname '/' '/' "$func_relative_path_tcancelled"
+  if test "x$func_stripname_result" != x ; then
+    func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
+  fi
+
+  # Normalisation. If bindir is libdir, return empty string,
+  # else relative path ending with a slash; either way, target
+  # file name can be directly appended.
+  if test ! -z "$func_relative_path_result"; then
+    func_stripname './' '' "$func_relative_path_result/"
+    func_relative_path_result=$func_stripname_result
+  fi
+}
 
 # The name of this program:
-# In the unlikely event $progname began with a '-', it would play havoc with
-# func_echo (imagine progname=-n), so we prepend ./ in that case:
 func_dirname_and_basename "$progpath"
 progname=$func_basename_result
-case $progname in
-  -*) progname=./$progname ;;
-esac
 
 # Make sure we have an absolute path for reexecution:
 case $progpath in
@@ -196,7 +383,7 @@
      ;;
   *)
      save_IFS="$IFS"
-     IFS=:
+     IFS=${PATH_SEPARATOR-:}
      for progdir in $PATH; do
        IFS="$save_IFS"
        test -x "$progdir/$progname" && break
@@ -215,6 +402,15 @@
 # Same as above, but do not quote variable references.
 double_quote_subst='s/\(["`\\]\)/\\\1/g'
 
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
+
+# Sed substitution that converts a w32 file name or path
+# which contains forward slashes, into one that contains
+# (escaped) backslashes.  A very naive implementation.
+lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
 # Re-`\' parameter expansions in output of double_quote_subst that were
 # `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
 # in input to double_quote_subst, that '$' was protected from expansion.
@@ -243,7 +439,7 @@
 # name if it has been set yet.
 func_echo ()
 {
-    $ECHO "$progname${mode+: }$mode: $*"
+    $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
 }
 
 # func_verbose arg...
@@ -258,18 +454,25 @@
     :
 }
 
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO "$*"
+}
+
 # func_error arg...
 # Echo program name prefixed message to standard error.
 func_error ()
 {
-    $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
+    $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
 }
 
 # func_warning arg...
 # Echo program name prefixed warning message to standard error.
 func_warning ()
 {
-    $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
+    $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
 
     # bash bug again:
     :
@@ -326,9 +529,9 @@
         case $my_directory_path in */*) ;; *) break ;; esac
 
         # ...otherwise throw away the child directory and loop
-        my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
+        my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
       done
-      my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
+      my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
 
       save_mkdir_p_IFS="$IFS"; IFS=':'
       for my_dir in $my_dir_list; do
@@ -378,7 +581,7 @@
         func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
     fi
 
-    $ECHO "X$my_tmpdir" | $Xsed
+    $ECHO "$my_tmpdir"
 }
 
 
@@ -392,7 +595,7 @@
 {
     case $1 in
       *[\\\`\"\$]*)
-	func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
+	func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
       *)
         func_quote_for_eval_unquoted_result="$1" ;;
     esac
@@ -419,7 +622,7 @@
 {
     case $1 in
       *[\\\`\"]*)
-	my_arg=`$ECHO "X$1" | $Xsed \
+	my_arg=`$ECHO "$1" | $SED \
 	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
       *)
         my_arg="$1" ;;
@@ -488,15 +691,39 @@
     fi
 }
 
-
-
+# func_tr_sh
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result.  All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+  case $1 in
+  [0-9]* | *[!a-zA-Z0-9_]*)
+    func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
+    ;;
+  * )
+    func_tr_sh_result=$1
+    ;;
+  esac
+}
 
 
 # func_version
 # Echo version message to standard output and exit.
 func_version ()
 {
-    $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
+    $opt_debug
+
+    $SED -n '/(C)/!b go
+	:more
+	/\./!{
+	  N
+	  s/\n# / /
+	  b more
+	}
+	:go
+	/^# '$PROGRAM' (GNU /,/# warranty; / {
         s/^# //
 	s/^# *$//
         s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
@@ -509,22 +736,28 @@
 # Echo short help message to standard output and exit.
 func_usage ()
 {
-    $SED -n '/^# Usage:/,/# -h/ {
+    $opt_debug
+
+    $SED -n '/^# Usage:/,/^#  *.*--help/ {
         s/^# //
 	s/^# *$//
 	s/\$progname/'$progname'/
 	p
     }' < "$progpath"
-    $ECHO
+    echo
     $ECHO "run \`$progname --help | more' for full usage"
     exit $?
 }
 
-# func_help
-# Echo long help message to standard output and exit.
+# func_help [NOEXIT]
+# Echo long help message to standard output and exit,
+# unless 'noexit' is passed as argument.
 func_help ()
 {
+    $opt_debug
+
     $SED -n '/^# Usage:/,/# Report bugs to/ {
+	:print
         s/^# //
 	s/^# *$//
 	s*\$progname*'$progname'*
@@ -534,11 +767,18 @@
 	s*\$LTCFLAGS*'"$LTCFLAGS"'*
 	s*\$LD*'"$LD"'*
 	s/\$with_gnu_ld/'"$with_gnu_ld"'/
-	s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
-	s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
+	s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
+	s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
 	p
-     }' < "$progpath"
-    exit $?
+	d
+     }
+     /^# .* home page:/b print
+     /^# General help using/b print
+     ' < "$progpath"
+    ret=$?
+    if test -z "$1"; then
+      exit $ret
+    fi
 }
 
 # func_missing_arg argname
@@ -546,63 +786,106 @@
 # exit_cmd.
 func_missing_arg ()
 {
-    func_error "missing argument for $1"
+    $opt_debug
+
+    func_error "missing argument for $1."
     exit_cmd=exit
 }
 
+
+# func_split_short_opt shortopt
+# Set func_split_short_opt_name and func_split_short_opt_arg shell
+# variables after splitting SHORTOPT after the 2nd character.
+func_split_short_opt ()
+{
+    my_sed_short_opt='1s/^\(..\).*$/\1/;q'
+    my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+
+    func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
+    func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
+} # func_split_short_opt may be replaced by extended shell implementation
+
+
+# func_split_long_opt longopt
+# Set func_split_long_opt_name and func_split_long_opt_arg shell
+# variables after splitting LONGOPT at the `=' sign.
+func_split_long_opt ()
+{
+    my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
+    my_sed_long_arg='1s/^--[^=]*=//'
+
+    func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
+    func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
+} # func_split_long_opt may be replaced by extended shell implementation
+
 exit_cmd=:
 
 
 
 
 
-# Check that we have a working $ECHO.
-if test "X$1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X$1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
-  # Yippee, $ECHO works!
-  :
-else
-  # Restart under the correct shell, and then maybe $ECHO will work.
-  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-$*
-EOF
-  exit $EXIT_SUCCESS
-fi
-
 magic="%%%MAGIC variable%%%"
 magic_exe="%%%MAGIC EXE variable%%%"
 
 # Global variables.
-# $mode is unset
 nonopt=
-execute_dlfiles=
 preserve_args=
 lo2o="s/\\.lo\$/.${objext}/"
 o2lo="s/\\.${objext}\$/.lo/"
 extracted_archives=
 extracted_serial=0
 
-opt_dry_run=false
-opt_duplicate_deps=false
-opt_silent=false
-opt_debug=:
-
 # If this variable is set in any of the actions, the command in it
 # will be execed at the end.  This prevents here-documents from being
 # left over by shells.
 exec_cmd=
 
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+    eval "${1}=\$${1}\${2}"
+} # func_append may be replaced by extended shell implementation
+
+# func_append_quoted var value
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+func_append_quoted ()
+{
+    func_quote_for_eval "${2}"
+    eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
+} # func_append_quoted may be replaced by extended shell implementation
+
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+    func_arith_result=`expr "${@}"`
+} # func_arith may be replaced by extended shell implementation
+
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+    func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
+} # func_len may be replaced by extended shell implementation
+
+
+# func_lo2o object
+func_lo2o ()
+{
+    func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
+} # func_lo2o may be replaced by extended shell implementation
+
+
+# func_xform libobj-or-source
+func_xform ()
+{
+    func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
+} # func_xform may be replaced by extended shell implementation
+
+
 # func_fatal_configuration arg...
 # Echo program name prefixed message to standard error, followed by
 # a configuration failure hint, and exit.
@@ -636,16 +919,16 @@
 # Display the features supported by this script.
 func_features ()
 {
-    $ECHO "host: $host"
+    echo "host: $host"
     if test "$build_libtool_libs" = yes; then
-      $ECHO "enable shared libraries"
+      echo "enable shared libraries"
     else
-      $ECHO "disable shared libraries"
+      echo "disable shared libraries"
     fi
     if test "$build_old_libs" = yes; then
-      $ECHO "enable static libraries"
+      echo "enable static libraries"
     else
-      $ECHO "disable static libraries"
+      echo "disable static libraries"
     fi
 
     exit $?
@@ -692,133 +975,6 @@
   esac
 }
 
-# Parse options once, thoroughly.  This comes as soon as possible in
-# the script to make things like `libtool --version' happen quickly.
-{
-
-  # Shorthand for --mode=foo, only valid as the first argument
-  case $1 in
-  clean|clea|cle|cl)
-    shift; set dummy --mode clean ${1+"$@"}; shift
-    ;;
-  compile|compil|compi|comp|com|co|c)
-    shift; set dummy --mode compile ${1+"$@"}; shift
-    ;;
-  execute|execut|execu|exec|exe|ex|e)
-    shift; set dummy --mode execute ${1+"$@"}; shift
-    ;;
-  finish|finis|fini|fin|fi|f)
-    shift; set dummy --mode finish ${1+"$@"}; shift
-    ;;
-  install|instal|insta|inst|ins|in|i)
-    shift; set dummy --mode install ${1+"$@"}; shift
-    ;;
-  link|lin|li|l)
-    shift; set dummy --mode link ${1+"$@"}; shift
-    ;;
-  uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
-    shift; set dummy --mode uninstall ${1+"$@"}; shift
-    ;;
-  esac
-
-  # Parse non-mode specific arguments:
-  while test "$#" -gt 0; do
-    opt="$1"
-    shift
-
-    case $opt in
-      --config)		func_config					;;
-
-      --debug)		preserve_args="$preserve_args $opt"
-			func_echo "enabling shell trace mode"
-			opt_debug='set -x'
-			$opt_debug
-			;;
-
-      -dlopen)		test "$#" -eq 0 && func_missing_arg "$opt" && break
-			execute_dlfiles="$execute_dlfiles $1"
-			shift
-			;;
-
-      --dry-run | -n)	opt_dry_run=:					;;
-      --features)       func_features					;;
-      --finish)		mode="finish"					;;
-
-      --mode)		test "$#" -eq 0 && func_missing_arg "$opt" && break
-			case $1 in
-			  # Valid mode arguments:
-			  clean)	;;
-			  compile)	;;
-			  execute)	;;
-			  finish)	;;
-			  install)	;;
-			  link)		;;
-			  relink)	;;
-			  uninstall)	;;
-
-			  # Catch anything else as an error
-			  *) func_error "invalid argument for $opt"
-			     exit_cmd=exit
-			     break
-			     ;;
-		        esac
-
-			mode="$1"
-			shift
-			;;
-
-      --preserve-dup-deps)
-			opt_duplicate_deps=:				;;
-
-      --quiet|--silent)	preserve_args="$preserve_args $opt"
-			opt_silent=:
-			;;
-
-      --verbose| -v)	preserve_args="$preserve_args $opt"
-			opt_silent=false
-			;;
-
-      --tag)		test "$#" -eq 0 && func_missing_arg "$opt" && break
-			preserve_args="$preserve_args $opt $1"
-			func_enable_tag "$1"	# tagname is set here
-			shift
-			;;
-
-      # Separate optargs to long options:
-      -dlopen=*|--mode=*|--tag=*)
-			func_opt_split "$opt"
-			set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
-			shift
-			;;
-
-      -\?|-h)		func_usage					;;
-      --help)		opt_help=:					;;
-      --version)	func_version					;;
-
-      -*)		func_fatal_help "unrecognized option \`$opt'"	;;
-
-      *)		nonopt="$opt"
-			break
-			;;
-    esac
-  done
-
-
-  case $host in
-    *cygwin* | *mingw* | *pw32* | *cegcc*)
-      # don't eliminate duplications in $postdeps and $predeps
-      opt_duplicate_compiler_generated_deps=:
-      ;;
-    *)
-      opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
-      ;;
-  esac
-
-  # Having warned about all mis-specified options, bail out if
-  # anything was wrong.
-  $exit_cmd $EXIT_FAILURE
-}
-
 # func_check_version_match
 # Ensure that we are using m4 macros, and libtool script from the same
 # release of libtool.
@@ -855,38 +1011,219 @@
 }
 
 
+# Shorthand for --mode=foo, only valid as the first argument
+case $1 in
+clean|clea|cle|cl)
+  shift; set dummy --mode clean ${1+"$@"}; shift
+  ;;
+compile|compil|compi|comp|com|co|c)
+  shift; set dummy --mode compile ${1+"$@"}; shift
+  ;;
+execute|execut|execu|exec|exe|ex|e)
+  shift; set dummy --mode execute ${1+"$@"}; shift
+  ;;
+finish|finis|fini|fin|fi|f)
+  shift; set dummy --mode finish ${1+"$@"}; shift
+  ;;
+install|instal|insta|inst|ins|in|i)
+  shift; set dummy --mode install ${1+"$@"}; shift
+  ;;
+link|lin|li|l)
+  shift; set dummy --mode link ${1+"$@"}; shift
+  ;;
+uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+  shift; set dummy --mode uninstall ${1+"$@"}; shift
+  ;;
+esac
+
+
+
+# Option defaults:
+opt_debug=:
+opt_dry_run=false
+opt_config=false
+opt_preserve_dup_deps=false
+opt_features=false
+opt_finish=false
+opt_help=false
+opt_help_all=false
+opt_silent=:
+opt_warning=:
+opt_verbose=:
+opt_silent=false
+opt_verbose=false
+
+
+# Parse options once, thoroughly.  This comes as soon as possible in the
+# script to make things like `--version' happen as quickly as we can.
+{
+  # this just eases exit handling
+  while test $# -gt 0; do
+    opt="$1"
+    shift
+    case $opt in
+      --debug|-x)	opt_debug='set -x'
+			func_echo "enabling shell trace mode"
+			$opt_debug
+			;;
+      --dry-run|--dryrun|-n)
+			opt_dry_run=:
+			;;
+      --config)
+			opt_config=:
+func_config
+			;;
+      --dlopen|-dlopen)
+			optarg="$1"
+			opt_dlopen="${opt_dlopen+$opt_dlopen
+}$optarg"
+			shift
+			;;
+      --preserve-dup-deps)
+			opt_preserve_dup_deps=:
+			;;
+      --features)
+			opt_features=:
+func_features
+			;;
+      --finish)
+			opt_finish=:
+set dummy --mode finish ${1+"$@"}; shift
+			;;
+      --help)
+			opt_help=:
+			;;
+      --help-all)
+			opt_help_all=:
+opt_help=': help-all'
+			;;
+      --mode)
+			test $# = 0 && func_missing_arg $opt && break
+			optarg="$1"
+			opt_mode="$optarg"
+case $optarg in
+  # Valid mode arguments:
+  clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+  # Catch anything else as an error
+  *) func_error "invalid argument for $opt"
+     exit_cmd=exit
+     break
+     ;;
+esac
+			shift
+			;;
+      --no-silent|--no-quiet)
+			opt_silent=false
+func_append preserve_args " $opt"
+			;;
+      --no-warning|--no-warn)
+			opt_warning=false
+func_append preserve_args " $opt"
+			;;
+      --no-verbose)
+			opt_verbose=false
+func_append preserve_args " $opt"
+			;;
+      --silent|--quiet)
+			opt_silent=:
+func_append preserve_args " $opt"
+        opt_verbose=false
+			;;
+      --verbose|-v)
+			opt_verbose=:
+func_append preserve_args " $opt"
+opt_silent=false
+			;;
+      --tag)
+			test $# = 0 && func_missing_arg $opt && break
+			optarg="$1"
+			opt_tag="$optarg"
+func_append preserve_args " $opt $optarg"
+func_enable_tag "$optarg"
+			shift
+			;;
+
+      -\?|-h)		func_usage				;;
+      --help)		func_help				;;
+      --version)	func_version				;;
+
+      # Separate optargs to long options:
+      --*=*)
+			func_split_long_opt "$opt"
+			set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
+			shift
+			;;
+
+      # Separate non-argument short options:
+      -\?*|-h*|-n*|-v*)
+			func_split_short_opt "$opt"
+			set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
+			shift
+			;;
+
+      --)		break					;;
+      -*)		func_fatal_help "unrecognized option \`$opt'" ;;
+      *)		set dummy "$opt" ${1+"$@"};	shift; break  ;;
+    esac
+  done
+
+  # Validate options:
+
+  # save first non-option argument
+  if test "$#" -gt 0; then
+    nonopt="$opt"
+    shift
+  fi
+
+  # preserve --debug
+  test "$opt_debug" = : || func_append preserve_args " --debug"
+
+  case $host in
+    *cygwin* | *mingw* | *pw32* | *cegcc*)
+      # don't eliminate duplications in $postdeps and $predeps
+      opt_duplicate_compiler_generated_deps=:
+      ;;
+    *)
+      opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+      ;;
+  esac
+
+  $opt_help || {
+    # Sanity checks first:
+    func_check_version_match
+
+    if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+      func_fatal_configuration "not configured to build any kind of library"
+    fi
+
+    # Darwin sucks
+    eval std_shrext=\"$shrext_cmds\"
+
+    # Only execute mode is allowed to have -dlopen flags.
+    if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
+      func_error "unrecognized option \`-dlopen'"
+      $ECHO "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    # Change the help message to a mode-specific one.
+    generic_help="$help"
+    help="Try \`$progname --help --mode=$opt_mode' for more information."
+  }
+
+
+  # Bail if the options were screwed
+  $exit_cmd $EXIT_FAILURE
+}
+
+
+
+
 ## ----------- ##
 ##    Main.    ##
 ## ----------- ##
 
-$opt_help || {
-  # Sanity checks first:
-  func_check_version_match
-
-  if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-    func_fatal_configuration "not configured to build any kind of library"
-  fi
-
-  test -z "$mode" && func_fatal_error "error: you must specify a MODE."
-
-
-  # Darwin sucks
-  eval std_shrext=\"$shrext_cmds\"
-
-
-  # Only execute mode is allowed to have -dlopen flags.
-  if test -n "$execute_dlfiles" && test "$mode" != execute; then
-    func_error "unrecognized option \`-dlopen'"
-    $ECHO "$help" 1>&2
-    exit $EXIT_FAILURE
-  fi
-
-  # Change the help message to a mode-specific one.
-  generic_help="$help"
-  help="Try \`$progname --help --mode=$mode' for more information."
-}
-
-
 # func_lalib_p file
 # True iff FILE is a libtool `.la' library or `.lo' object file.
 # This function is only a basic sanity check; it will hardly flush out
@@ -950,12 +1287,9 @@
 # temporary ltwrapper_script.
 func_ltwrapper_scriptname ()
 {
-    func_ltwrapper_scriptname_result=""
-    if func_ltwrapper_executable_p "$1"; then
-	func_dirname_and_basename "$1" "" "."
-	func_stripname '' '.exe' "$func_basename_result"
-	func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
-    fi
+    func_dirname_and_basename "$1" "" "."
+    func_stripname '' '.exe' "$func_basename_result"
+    func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
 }
 
 # func_ltwrapper_p file
@@ -1001,6 +1335,37 @@
 }
 
 
+# func_resolve_sysroot PATH
+# Replace a leading = in PATH with a sysroot.  Store the result into
+# func_resolve_sysroot_result
+func_resolve_sysroot ()
+{
+  func_resolve_sysroot_result=$1
+  case $func_resolve_sysroot_result in
+  =*)
+    func_stripname '=' '' "$func_resolve_sysroot_result"
+    func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
+    ;;
+  esac
+}
+
+# func_replace_sysroot PATH
+# If PATH begins with the sysroot, replace it with = and
+# store the result into func_replace_sysroot_result.
+func_replace_sysroot ()
+{
+  case "$lt_sysroot:$1" in
+  ?*:"$lt_sysroot"*)
+    func_stripname "$lt_sysroot" '' "$1"
+    func_replace_sysroot_result="=$func_stripname_result"
+    ;;
+  *)
+    # Including no sysroot.
+    func_replace_sysroot_result=$1
+    ;;
+  esac
+}
+
 # func_infer_tag arg
 # Infer tagged configuration to use if any are available and
 # if one wasn't chosen via the "--tag" command line option.
@@ -1013,13 +1378,15 @@
     if test -n "$available_tags" && test -z "$tagname"; then
       CC_quoted=
       for arg in $CC; do
-        func_quote_for_eval "$arg"
-	CC_quoted="$CC_quoted $func_quote_for_eval_result"
+	func_append_quoted CC_quoted "$arg"
       done
+      CC_expanded=`func_echo_all $CC`
+      CC_quoted_expanded=`func_echo_all $CC_quoted`
       case $@ in
       # Blanks in the command may have been stripped by the calling shell,
       # but not from the CC environment variable when configure was run.
-      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
+      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+      " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
       # Blanks at the start of $base_compile will cause this to fail
       # if we don't check for them as well.
       *)
@@ -1030,11 +1397,13 @@
 	    CC_quoted=
 	    for arg in $CC; do
 	      # Double-quote args containing other shell metacharacters.
-	      func_quote_for_eval "$arg"
-	      CC_quoted="$CC_quoted $func_quote_for_eval_result"
+	      func_append_quoted CC_quoted "$arg"
 	    done
+	    CC_expanded=`func_echo_all $CC`
+	    CC_quoted_expanded=`func_echo_all $CC_quoted`
 	    case "$@ " in
-	      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
+	    " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+	    " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
 	      # The compiler in the base compile command matches
 	      # the one in the tagged configuration.
 	      # Assume this is the tagged configuration we want.
@@ -1097,6 +1466,486 @@
     }
 }
 
+
+##################################################
+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
+##################################################
+
+# func_convert_core_file_wine_to_w32 ARG
+# Helper function used by file name conversion functions when $build is *nix,
+# and $host is mingw, cygwin, or some other w32 environment. Relies on a
+# correctly configured wine environment available, with the winepath program
+# in $build's $PATH.
+#
+# ARG is the $build file name to be converted to w32 format.
+# Result is available in $func_convert_core_file_wine_to_w32_result, and will
+# be empty on error (or when ARG is empty)
+func_convert_core_file_wine_to_w32 ()
+{
+  $opt_debug
+  func_convert_core_file_wine_to_w32_result="$1"
+  if test -n "$1"; then
+    # Unfortunately, winepath does not exit with a non-zero error code, so we
+    # are forced to check the contents of stdout. On the other hand, if the
+    # command is not found, the shell will set an exit code of 127 and print
+    # *an error message* to stdout. So we must check for both error code of
+    # zero AND non-empty stdout, which explains the odd construction:
+    func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
+    if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
+      func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
+        $SED -e "$lt_sed_naive_backslashify"`
+    else
+      func_convert_core_file_wine_to_w32_result=
+    fi
+  fi
+}
+# end: func_convert_core_file_wine_to_w32
+
+
+# func_convert_core_path_wine_to_w32 ARG
+# Helper function used by path conversion functions when $build is *nix, and
+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
+# configured wine environment available, with the winepath program in $build's
+# $PATH. Assumes ARG has no leading or trailing path separator characters.
+#
+# ARG is path to be converted from $build format to win32.
+# Result is available in $func_convert_core_path_wine_to_w32_result.
+# Unconvertible file (directory) names in ARG are skipped; if no directory names
+# are convertible, then the result may be empty.
+func_convert_core_path_wine_to_w32 ()
+{
+  $opt_debug
+  # unfortunately, winepath doesn't convert paths, only file names
+  func_convert_core_path_wine_to_w32_result=""
+  if test -n "$1"; then
+    oldIFS=$IFS
+    IFS=:
+    for func_convert_core_path_wine_to_w32_f in $1; do
+      IFS=$oldIFS
+      func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
+      if test -n "$func_convert_core_file_wine_to_w32_result" ; then
+        if test -z "$func_convert_core_path_wine_to_w32_result"; then
+          func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
+        else
+          func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
+        fi
+      fi
+    done
+    IFS=$oldIFS
+  fi
+}
+# end: func_convert_core_path_wine_to_w32
+
+
+# func_cygpath ARGS...
+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
+# (2), returns the Cygwin file name or path in func_cygpath_result (input
+# file name or path is assumed to be in w32 format, as previously converted
+# from $build's *nix or MSYS format). In case (3), returns the w32 file name
+# or path in func_cygpath_result (input file name or path is assumed to be in
+# Cygwin format). Returns an empty string on error.
+#
+# ARGS are passed to cygpath, with the last one being the file name or path to
+# be converted.
+#
+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
+# environment variable; do not put it in $PATH.
+func_cygpath ()
+{
+  $opt_debug
+  if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
+    func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
+    if test "$?" -ne 0; then
+      # on failure, ensure result is empty
+      func_cygpath_result=
+    fi
+  else
+    func_cygpath_result=
+    func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
+  fi
+}
+#end: func_cygpath
+
+
+# func_convert_core_msys_to_w32 ARG
+# Convert file name or path ARG from MSYS format to w32 format.  Return
+# result in func_convert_core_msys_to_w32_result.
+func_convert_core_msys_to_w32 ()
+{
+  $opt_debug
+  # awkward: cmd appends spaces to result
+  func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
+    $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+}
+#end: func_convert_core_msys_to_w32
+
+
+# func_convert_file_check ARG1 ARG2
+# Verify that ARG1 (a file name in $build format) was converted to $host
+# format in ARG2. Otherwise, emit an error message, but continue (resetting
+# func_to_host_file_result to ARG1).
+func_convert_file_check ()
+{
+  $opt_debug
+  if test -z "$2" && test -n "$1" ; then
+    func_error "Could not determine host file name corresponding to"
+    func_error "  \`$1'"
+    func_error "Continuing, but uninstalled executables may not work."
+    # Fallback:
+    func_to_host_file_result="$1"
+  fi
+}
+# end func_convert_file_check
+
+
+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
+# Verify that FROM_PATH (a path in $build format) was converted to $host
+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
+# func_to_host_file_result to a simplistic fallback value (see below).
+func_convert_path_check ()
+{
+  $opt_debug
+  if test -z "$4" && test -n "$3"; then
+    func_error "Could not determine the host path corresponding to"
+    func_error "  \`$3'"
+    func_error "Continuing, but uninstalled executables may not work."
+    # Fallback.  This is a deliberately simplistic "conversion" and
+    # should not be "improved".  See libtool.info.
+    if test "x$1" != "x$2"; then
+      lt_replace_pathsep_chars="s|$1|$2|g"
+      func_to_host_path_result=`echo "$3" |
+        $SED -e "$lt_replace_pathsep_chars"`
+    else
+      func_to_host_path_result="$3"
+    fi
+  fi
+}
+# end func_convert_path_check
+
+
+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
+# and appending REPL if ORIG matches BACKPAT.
+func_convert_path_front_back_pathsep ()
+{
+  $opt_debug
+  case $4 in
+  $1 ) func_to_host_path_result="$3$func_to_host_path_result"
+    ;;
+  esac
+  case $4 in
+  $2 ) func_append func_to_host_path_result "$3"
+    ;;
+  esac
+}
+# end func_convert_path_front_back_pathsep
+
+
+##################################################
+# $build to $host FILE NAME CONVERSION FUNCTIONS #
+##################################################
+# invoked via `$to_host_file_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# Result will be available in $func_to_host_file_result.
+
+
+# func_to_host_file ARG
+# Converts the file name ARG from $build format to $host format. Return result
+# in func_to_host_file_result.
+func_to_host_file ()
+{
+  $opt_debug
+  $to_host_file_cmd "$1"
+}
+# end func_to_host_file
+
+
+# func_to_tool_file ARG LAZY
+# converts the file name ARG from $build format to toolchain format. Return
+# result in func_to_tool_file_result.  If the conversion in use is listed
+# in (the comma separated) LAZY, no conversion takes place.
+func_to_tool_file ()
+{
+  $opt_debug
+  case ,$2, in
+    *,"$to_tool_file_cmd",*)
+      func_to_tool_file_result=$1
+      ;;
+    *)
+      $to_tool_file_cmd "$1"
+      func_to_tool_file_result=$func_to_host_file_result
+      ;;
+  esac
+}
+# end func_to_tool_file
+
+
+# func_convert_file_noop ARG
+# Copy ARG to func_to_host_file_result.
+func_convert_file_noop ()
+{
+  func_to_host_file_result="$1"
+}
+# end func_convert_file_noop
+
+
+# func_convert_file_msys_to_w32 ARG
+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper.  Returns result in
+# func_to_host_file_result.
+func_convert_file_msys_to_w32 ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    func_convert_core_msys_to_w32 "$1"
+    func_to_host_file_result="$func_convert_core_msys_to_w32_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_w32
+
+
+# func_convert_file_cygwin_to_w32 ARG
+# Convert file name ARG from Cygwin to w32 format.  Returns result in
+# func_to_host_file_result.
+func_convert_file_cygwin_to_w32 ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
+    # LT_CYGPATH in this case.
+    func_to_host_file_result=`cygpath -m "$1"`
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_cygwin_to_w32
+
+
+# func_convert_file_nix_to_w32 ARG
+# Convert file name ARG from *nix to w32 format.  Requires a wine environment
+# and a working winepath. Returns result in func_to_host_file_result.
+func_convert_file_nix_to_w32 ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    func_convert_core_file_wine_to_w32 "$1"
+    func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_w32
+
+
+# func_convert_file_msys_to_cygwin ARG
+# Convert file name ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_file_msys_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    func_convert_core_msys_to_w32 "$1"
+    func_cygpath -u "$func_convert_core_msys_to_w32_result"
+    func_to_host_file_result="$func_cygpath_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_cygwin
+
+
+# func_convert_file_nix_to_cygwin ARG
+# Convert file name ARG from *nix to Cygwin format.  Requires Cygwin installed
+# in a wine environment, working winepath, and LT_CYGPATH set.  Returns result
+# in func_to_host_file_result.
+func_convert_file_nix_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
+    func_convert_core_file_wine_to_w32 "$1"
+    func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
+    func_to_host_file_result="$func_cygpath_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_cygwin
+
+
+#############################################
+# $build to $host PATH CONVERSION FUNCTIONS #
+#############################################
+# invoked via `$to_host_path_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# The result will be available in $func_to_host_path_result.
+#
+# Path separators are also converted from $build format to $host format.  If
+# ARG begins or ends with a path separator character, it is preserved (but
+# converted to $host format) on output.
+#
+# All path conversion functions are named using the following convention:
+#   file name conversion function    : func_convert_file_X_to_Y ()
+#   path conversion function         : func_convert_path_X_to_Y ()
+# where, for any given $build/$host combination the 'X_to_Y' value is the
+# same.  If conversion functions are added for new $build/$host combinations,
+# the two new functions must follow this pattern, or func_init_to_host_path_cmd
+# will break.
+
+
+# func_init_to_host_path_cmd
+# Ensures that function "pointer" variable $to_host_path_cmd is set to the
+# appropriate value, based on the value of $to_host_file_cmd.
+to_host_path_cmd=
+func_init_to_host_path_cmd ()
+{
+  $opt_debug
+  if test -z "$to_host_path_cmd"; then
+    func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
+    to_host_path_cmd="func_convert_path_${func_stripname_result}"
+  fi
+}
+
+
+# func_to_host_path ARG
+# Converts the path ARG from $build format to $host format. Return result
+# in func_to_host_path_result.
+func_to_host_path ()
+{
+  $opt_debug
+  func_init_to_host_path_cmd
+  $to_host_path_cmd "$1"
+}
+# end func_to_host_path
+
+
+# func_convert_path_noop ARG
+# Copy ARG to func_to_host_path_result.
+func_convert_path_noop ()
+{
+  func_to_host_path_result="$1"
+}
+# end func_convert_path_noop
+
+
+# func_convert_path_msys_to_w32 ARG
+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper.  Returns result in
+# func_to_host_path_result.
+func_convert_path_msys_to_w32 ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # Remove leading and trailing path separator characters from ARG.  MSYS
+    # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
+    # and winepath ignores them completely.
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+    func_to_host_path_result="$func_convert_core_msys_to_w32_result"
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_msys_to_w32
+
+
+# func_convert_path_cygwin_to_w32 ARG
+# Convert path ARG from Cygwin to w32 format.  Returns result in
+# func_to_host_file_result.
+func_convert_path_cygwin_to_w32 ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_cygwin_to_w32
+
+
+# func_convert_path_nix_to_w32 ARG
+# Convert path ARG from *nix to w32 format.  Requires a wine environment and
+# a working winepath.  Returns result in func_to_host_file_result.
+func_convert_path_nix_to_w32 ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+    func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_nix_to_w32
+
+
+# func_convert_path_msys_to_cygwin ARG
+# Convert path ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_path_msys_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+    func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
+    func_to_host_path_result="$func_cygpath_result"
+    func_convert_path_check : : \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+  fi
+}
+# end func_convert_path_msys_to_cygwin
+
+
+# func_convert_path_nix_to_cygwin ARG
+# Convert path ARG from *nix to Cygwin format.  Requires Cygwin installed in a
+# a wine environment, working winepath, and LT_CYGPATH set.  Returns result in
+# func_to_host_file_result.
+func_convert_path_nix_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # Remove leading and trailing path separator characters from
+    # ARG. msys behavior is inconsistent here, cygpath turns them
+    # into '.;' and ';.', and winepath ignores them completely.
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+    func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
+    func_to_host_path_result="$func_cygpath_result"
+    func_convert_path_check : : \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+  fi
+}
+# end func_convert_path_nix_to_cygwin
+
+
 # func_mode_compile arg...
 func_mode_compile ()
 {
@@ -1137,12 +1986,12 @@
 	  ;;
 
 	-pie | -fpie | -fPIE)
-          pie_flag="$pie_flag $arg"
+          func_append pie_flag " $arg"
 	  continue
 	  ;;
 
 	-shared | -static | -prefer-pic | -prefer-non-pic)
-	  later="$later $arg"
+	  func_append later " $arg"
 	  continue
 	  ;;
 
@@ -1163,15 +2012,14 @@
 	  save_ifs="$IFS"; IFS=','
 	  for arg in $args; do
 	    IFS="$save_ifs"
-	    func_quote_for_eval "$arg"
-	    lastarg="$lastarg $func_quote_for_eval_result"
+	    func_append_quoted lastarg "$arg"
 	  done
 	  IFS="$save_ifs"
 	  func_stripname ' ' '' "$lastarg"
 	  lastarg=$func_stripname_result
 
 	  # Add the arguments to base_compile.
-	  base_compile="$base_compile $lastarg"
+	  func_append base_compile " $lastarg"
 	  continue
 	  ;;
 
@@ -1187,8 +2035,7 @@
       esac    #  case $arg_mode
 
       # Aesthetically quote the previous argument.
-      func_quote_for_eval "$lastarg"
-      base_compile="$base_compile $func_quote_for_eval_result"
+      func_append_quoted base_compile "$lastarg"
     done # for arg
 
     case $arg_mode in
@@ -1213,7 +2060,7 @@
     *.[cCFSifmso] | \
     *.ada | *.adb | *.ads | *.asm | \
     *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
-    *.[fF][09]? | *.for | *.java | *.obj | *.sx)
+    *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
       func_xform "$libobj"
       libobj=$func_xform_result
       ;;
@@ -1288,7 +2135,7 @@
     # Calculate the filename of the output object if compiler does
     # not support -o with -c
     if test "$compiler_c_o" = no; then
-      output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
       lockfile="$output_obj.lock"
     else
       output_obj=
@@ -1319,17 +2166,16 @@
 	$opt_dry_run || $RM $removelist
 	exit $EXIT_FAILURE
       fi
-      removelist="$removelist $output_obj"
+      func_append removelist " $output_obj"
       $ECHO "$srcfile" > "$lockfile"
     fi
 
     $opt_dry_run || $RM $removelist
-    removelist="$removelist $lockfile"
+    func_append removelist " $lockfile"
     trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
 
-    if test -n "$fix_srcfile_path"; then
-      eval srcfile=\"$fix_srcfile_path\"
-    fi
+    func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
+    srcfile=$func_to_tool_file_result
     func_quote_for_eval "$srcfile"
     qsrcfile=$func_quote_for_eval_result
 
@@ -1349,7 +2195,7 @@
 
       if test -z "$output_obj"; then
 	# Place PIC objects in $objdir
-	command="$command -o $lobj"
+	func_append command " -o $lobj"
       fi
 
       func_show_eval_locale "$command"	\
@@ -1396,11 +2242,11 @@
 	command="$base_compile $qsrcfile $pic_flag"
       fi
       if test "$compiler_c_o" = yes; then
-	command="$command -o $obj"
+	func_append command " -o $obj"
       fi
 
       # Suppress compiler output if we already did a PIC compilation.
-      command="$command$suppress_output"
+      func_append command "$suppress_output"
       func_show_eval_locale "$command" \
         '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
 
@@ -1445,13 +2291,13 @@
 }
 
 $opt_help || {
-test "$mode" = compile && func_mode_compile ${1+"$@"}
+  test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
 }
 
 func_mode_help ()
 {
     # We need to display help for each of the modes.
-    case $mode in
+    case $opt_mode in
       "")
         # Generic help is extracted from the usage comments
         # at the start of this file.
@@ -1482,10 +2328,11 @@
 
   -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
   -no-suppress      do not suppress compiler output for multiple passes
-  -prefer-pic       try to building PIC objects only
-  -prefer-non-pic   try to building non-PIC objects only
+  -prefer-pic       try to build PIC objects only
+  -prefer-non-pic   try to build non-PIC objects only
   -shared           do not build a \`.o' file suitable for static linking
   -static           only build a \`.o' file suitable for static linking
+  -Wc,FLAG          pass FLAG directly to the compiler
 
 COMPILE-COMMAND is a command to be used in creating a \`standard' object file
 from the given SOURCEFILE.
@@ -1538,7 +2385,7 @@
 
 The following components of INSTALL-COMMAND are treated specially:
 
-  -inst-prefix PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
+  -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
 
 The rest of the components are interpreted as arguments to that command (only
 BSD-compatible install options are recognized)."
@@ -1558,6 +2405,8 @@
 
   -all-static       do not do any dynamic linking at all
   -avoid-version    do not add a version suffix if possible
+  -bindir BINDIR    specify path to binaries directory (for systems where
+                    libraries must be found in the PATH setting at runtime)
   -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
@@ -1586,6 +2435,11 @@
   -version-info CURRENT[:REVISION[:AGE]]
                     specify library version info [each variable defaults to 0]
   -weak LIBNAME     declare that the target provides the LIBNAME interface
+  -Wc,FLAG
+  -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
+  -Wl,FLAG
+  -Xlinker FLAG     pass linker-specific FLAG directly to the linker
+  -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
 
 All other options (arguments beginning with \`-') are ignored.
 
@@ -1619,18 +2473,44 @@
         ;;
 
       *)
-        func_fatal_help "invalid operation mode \`$mode'"
+        func_fatal_help "invalid operation mode \`$opt_mode'"
         ;;
     esac
 
-    $ECHO
+    echo
     $ECHO "Try \`$progname --help' for more information about other modes."
-
-    exit $?
 }
 
-  # Now that we've collected a possible --mode arg, show help if necessary
-  $opt_help && func_mode_help
+# Now that we've collected a possible --mode arg, show help if necessary
+if $opt_help; then
+  if test "$opt_help" = :; then
+    func_mode_help
+  else
+    {
+      func_help noexit
+      for opt_mode in compile link execute install finish uninstall clean; do
+	func_mode_help
+      done
+    } | sed -n '1p; 2,$s/^Usage:/  or: /p'
+    {
+      func_help noexit
+      for opt_mode in compile link execute install finish uninstall clean; do
+	echo
+	func_mode_help
+      done
+    } |
+    sed '1d
+      /^When reporting/,/^Report/{
+	H
+	d
+      }
+      $x
+      /information about other modes/d
+      /more detailed .*MODE/d
+      s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
+  fi
+  exit $?
+fi
 
 
 # func_mode_execute arg...
@@ -1643,13 +2523,16 @@
       func_fatal_help "you must specify a COMMAND"
 
     # Handle -dlopen flags immediately.
-    for file in $execute_dlfiles; do
+    for file in $opt_dlopen; do
       test -f "$file" \
 	|| func_fatal_help "\`$file' is not a file"
 
       dir=
       case $file in
       *.la)
+	func_resolve_sysroot "$file"
+	file=$func_resolve_sysroot_result
+
 	# Check to see that this really is a libtool archive.
 	func_lalib_unsafe_p "$file" \
 	  || func_fatal_help "\`$lib' is not a valid libtool archive"
@@ -1671,7 +2554,7 @@
 	dir="$func_dirname_result"
 
 	if test -f "$dir/$objdir/$dlname"; then
-	  dir="$dir/$objdir"
+	  func_append dir "/$objdir"
 	else
 	  if test ! -f "$dir/$dlname"; then
 	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
@@ -1712,7 +2595,7 @@
     for file
     do
       case $file in
-      -*) ;;
+      -* | *.la | *.lo ) ;;
       *)
 	# Do a test to see if this is really a libtool program.
 	if func_ltwrapper_script_p "$file"; then
@@ -1728,8 +2611,7 @@
 	;;
       esac
       # Quote arguments (to preserve shell metacharacters).
-      func_quote_for_eval "$file"
-      args="$args $func_quote_for_eval_result"
+      func_append_quoted args "$file"
     done
 
     if test "X$opt_dry_run" = Xfalse; then
@@ -1754,29 +2636,66 @@
       # Display what would be done.
       if test -n "$shlibpath_var"; then
 	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
-	$ECHO "export $shlibpath_var"
+	echo "export $shlibpath_var"
       fi
       $ECHO "$cmd$args"
       exit $EXIT_SUCCESS
     fi
 }
 
-test "$mode" = execute && func_mode_execute ${1+"$@"}
+test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
 
 
 # func_mode_finish arg...
 func_mode_finish ()
 {
     $opt_debug
-    libdirs="$nonopt"
+    libs=
+    libdirs=
     admincmds=
 
-    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-      for dir
-      do
-	libdirs="$libdirs $dir"
-      done
+    for opt in "$nonopt" ${1+"$@"}
+    do
+      if test -d "$opt"; then
+	func_append libdirs " $opt"
 
+      elif test -f "$opt"; then
+	if func_lalib_unsafe_p "$opt"; then
+	  func_append libs " $opt"
+	else
+	  func_warning "\`$opt' is not a valid libtool archive"
+	fi
+
+      else
+	func_fatal_error "invalid argument \`$opt'"
+      fi
+    done
+
+    if test -n "$libs"; then
+      if test -n "$lt_sysroot"; then
+        sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
+        sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
+      else
+        sysroot_cmd=
+      fi
+
+      # Remove sysroot references
+      if $opt_dry_run; then
+        for lib in $libs; do
+          echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
+        done
+      else
+        tmpdir=`func_mktempdir`
+        for lib in $libs; do
+	  sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+	    > $tmpdir/tmp-la
+	  mv -f $tmpdir/tmp-la $lib
+	done
+        ${RM}r "$tmpdir"
+      fi
+    fi
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
       for libdir in $libdirs; do
 	if test -n "$finish_cmds"; then
 	  # Do each command in the finish commands.
@@ -1786,7 +2705,7 @@
 	if test -n "$finish_eval"; then
 	  # Do the single finish_eval.
 	  eval cmds=\"$finish_eval\"
-	  $opt_dry_run || eval "$cmds" || admincmds="$admincmds
+	  $opt_dry_run || eval "$cmds" || func_append admincmds "
        $cmds"
 	fi
       done
@@ -1795,53 +2714,55 @@
     # Exit here if they wanted silent mode.
     $opt_silent && exit $EXIT_SUCCESS
 
-    $ECHO "X----------------------------------------------------------------------" | $Xsed
-    $ECHO "Libraries have been installed in:"
-    for libdir in $libdirs; do
-      $ECHO "   $libdir"
-    done
-    $ECHO
-    $ECHO "If you ever happen to want to link against installed libraries"
-    $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
-    $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
-    $ECHO "flag during linking and do at least one of the following:"
-    if test -n "$shlibpath_var"; then
-      $ECHO "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-      $ECHO "     during execution"
-    fi
-    if test -n "$runpath_var"; then
-      $ECHO "   - add LIBDIR to the \`$runpath_var' environment variable"
-      $ECHO "     during linking"
-    fi
-    if test -n "$hardcode_libdir_flag_spec"; then
-      libdir=LIBDIR
-      eval flag=\"$hardcode_libdir_flag_spec\"
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      echo "----------------------------------------------------------------------"
+      echo "Libraries have been installed in:"
+      for libdir in $libdirs; do
+	$ECHO "   $libdir"
+      done
+      echo
+      echo "If you ever happen to want to link against installed libraries"
+      echo "in a given directory, LIBDIR, you must either use libtool, and"
+      echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+      echo "flag during linking and do at least one of the following:"
+      if test -n "$shlibpath_var"; then
+	echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+	echo "     during execution"
+      fi
+      if test -n "$runpath_var"; then
+	echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+	echo "     during linking"
+      fi
+      if test -n "$hardcode_libdir_flag_spec"; then
+	libdir=LIBDIR
+	eval flag=\"$hardcode_libdir_flag_spec\"
 
-      $ECHO "   - use the \`$flag' linker flag"
-    fi
-    if test -n "$admincmds"; then
-      $ECHO "   - have your system administrator run these commands:$admincmds"
-    fi
-    if test -f /etc/ld.so.conf; then
-      $ECHO "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-    fi
-    $ECHO
+	$ECHO "   - use the \`$flag' linker flag"
+      fi
+      if test -n "$admincmds"; then
+	$ECHO "   - have your system administrator run these commands:$admincmds"
+      fi
+      if test -f /etc/ld.so.conf; then
+	echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+      fi
+      echo
 
-    $ECHO "See any operating system documentation about shared libraries for"
-    case $host in
-      solaris2.[6789]|solaris2.1[0-9])
-        $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
-	$ECHO "pages."
-	;;
-      *)
-        $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
-        ;;
-    esac
-    $ECHO "X----------------------------------------------------------------------" | $Xsed
+      echo "See any operating system documentation about shared libraries for"
+      case $host in
+	solaris2.[6789]|solaris2.1[0-9])
+	  echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+	  echo "pages."
+	  ;;
+	*)
+	  echo "more information, such as the ld(1) and ld.so(8) manual pages."
+	  ;;
+      esac
+      echo "----------------------------------------------------------------------"
+    fi
     exit $EXIT_SUCCESS
 }
 
-test "$mode" = finish && func_mode_finish ${1+"$@"}
+test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
 
 
 # func_mode_install arg...
@@ -1852,7 +2773,7 @@
     # install_prog (especially on Windows NT).
     if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
        # Allow the use of GNU shtool's install command.
-       $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
+       case $nonopt in *shtool*) :;; *) false;; esac; then
       # Aesthetically quote it.
       func_quote_for_eval "$nonopt"
       install_prog="$func_quote_for_eval_result "
@@ -1866,7 +2787,12 @@
     # The real first argument should be the name of the installation program.
     # Aesthetically quote it.
     func_quote_for_eval "$arg"
-    install_prog="$install_prog$func_quote_for_eval_result"
+    func_append install_prog "$func_quote_for_eval_result"
+    install_shared_prog=$install_prog
+    case " $install_prog " in
+      *[\\\ /]cp\ *) install_cp=: ;;
+      *) install_cp=false ;;
+    esac
 
     # We need to accept at least all the BSD install flags.
     dest=
@@ -1876,10 +2802,12 @@
     install_type=
     isdir=no
     stripme=
+    no_mode=:
     for arg
     do
+      arg2=
       if test -n "$dest"; then
-	files="$files $dest"
+	func_append files " $dest"
 	dest=$arg
 	continue
       fi
@@ -1887,10 +2815,9 @@
       case $arg in
       -d) isdir=yes ;;
       -f)
-	case " $install_prog " in
-	*[\\\ /]cp\ *) ;;
-	*) prev=$arg ;;
-	esac
+	if $install_cp; then :; else
+	  prev=$arg
+	fi
 	;;
       -g | -m | -o)
 	prev=$arg
@@ -1904,6 +2831,10 @@
       *)
 	# If the previous option needed an argument, then skip it.
 	if test -n "$prev"; then
+	  if test "x$prev" = x-m && test -n "$install_override_mode"; then
+	    arg2=$install_override_mode
+	    no_mode=false
+	  fi
 	  prev=
 	else
 	  dest=$arg
@@ -1914,7 +2845,11 @@
 
       # Aesthetically quote the argument.
       func_quote_for_eval "$arg"
-      install_prog="$install_prog $func_quote_for_eval_result"
+      func_append install_prog " $func_quote_for_eval_result"
+      if test -n "$arg2"; then
+	func_quote_for_eval "$arg2"
+      fi
+      func_append install_shared_prog " $func_quote_for_eval_result"
     done
 
     test -z "$install_prog" && \
@@ -1923,6 +2858,13 @@
     test -n "$prev" && \
       func_fatal_help "the \`$prev' option requires an argument"
 
+    if test -n "$install_override_mode" && $no_mode; then
+      if $install_cp; then :; else
+	func_quote_for_eval "$install_override_mode"
+	func_append install_shared_prog " -m $func_quote_for_eval_result"
+      fi
+    fi
+
     if test -z "$files"; then
       if test -z "$dest"; then
 	func_fatal_help "no file or destination specified"
@@ -1977,10 +2919,13 @@
       case $file in
       *.$libext)
 	# Do the static libraries later.
-	staticlibs="$staticlibs $file"
+	func_append staticlibs " $file"
 	;;
 
       *.la)
+	func_resolve_sysroot "$file"
+	file=$func_resolve_sysroot_result
+
 	# Check to see that this really is a libtool archive.
 	func_lalib_unsafe_p "$file" \
 	  || func_fatal_help "\`$file' is not a valid libtool archive"
@@ -1994,23 +2939,23 @@
 	if test "X$destdir" = "X$libdir"; then
 	  case "$current_libdirs " in
 	  *" $libdir "*) ;;
-	  *) current_libdirs="$current_libdirs $libdir" ;;
+	  *) func_append current_libdirs " $libdir" ;;
 	  esac
 	else
 	  # Note the libdir as a future libdir.
 	  case "$future_libdirs " in
 	  *" $libdir "*) ;;
-	  *) future_libdirs="$future_libdirs $libdir" ;;
+	  *) func_append future_libdirs " $libdir" ;;
 	  esac
 	fi
 
 	func_dirname "$file" "/" ""
 	dir="$func_dirname_result"
-	dir="$dir$objdir"
+	func_append dir "$objdir"
 
 	if test -n "$relink_command"; then
 	  # Determine the prefix the user has applied to our future dir.
-	  inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
+	  inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
 
 	  # Don't allow the user to place us outside of our expected
 	  # location b/c this prevents finding dependent libraries that
@@ -2023,9 +2968,9 @@
 
 	  if test -n "$inst_prefix_dir"; then
 	    # Stick the inst_prefix_dir data into the link command.
-	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
 	  else
-	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
 	  fi
 
 	  func_warning "relinking \`$file'"
@@ -2043,7 +2988,7 @@
 	  test -n "$relink_command" && srcname="$realname"T
 
 	  # Install the shared library and build the symlinks.
-	  func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
+	  func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
 	      'exit $?'
 	  tstripme="$stripme"
 	  case $host_os in
@@ -2083,7 +3028,7 @@
 	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
 
 	# Maybe install the static library, too.
-	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+	test -n "$old_library" && func_append staticlibs " $dir/$old_library"
 	;;
 
       *.lo)
@@ -2183,7 +3128,7 @@
 	    if test -f "$lib"; then
 	      func_source "$lib"
 	    fi
-	    libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+	    libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
 	    if test -n "$libdir" && test ! -f "$libfile"; then
 	      func_warning "\`$lib' has not been installed in \`$libdir'"
 	      finalize=no
@@ -2202,7 +3147,7 @@
 		file="$func_basename_result"
 	        outputname="$tmpdir/$file"
 	        # Replace the output file specification.
-	        relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+	        relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
 
 	        $opt_silent || {
 	          func_quote_for_expand "$relink_command"
@@ -2221,7 +3166,7 @@
 	    }
 	  else
 	    # Install the binary that we compiled earlier.
-	    file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+	    file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
 	  fi
 	fi
 
@@ -2257,11 +3202,13 @@
 
       # Set up the ranlib parameters.
       oldlib="$destdir/$name"
+      func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+      tool_oldlib=$func_to_tool_file_result
 
       func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
 
       if test -n "$stripme" && test -n "$old_striplib"; then
-	func_show_eval "$old_striplib $oldlib" 'exit $?'
+	func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
       fi
 
       # Do each command in the postinstall commands.
@@ -2280,7 +3227,7 @@
     fi
 }
 
-test "$mode" = install && func_mode_install ${1+"$@"}
+test "$opt_mode" = install && func_mode_install ${1+"$@"}
 
 
 # func_generate_dlsyms outputname originator pic_p
@@ -2323,6 +3270,22 @@
 extern \"C\" {
 #endif
 
+#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
 /* External symbol declarations for the compiler. */\
 "
 
@@ -2332,10 +3295,11 @@
 	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
 
 	  # Add our own program objects to the symbol list.
-	  progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	  progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
 	  for progfile in $progfiles; do
-	    func_verbose "extracting global C symbols from \`$progfile'"
-	    $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
+	    func_to_tool_file "$progfile" func_convert_file_msys_to_w32
+	    func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
+	    $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
 	  done
 
 	  if test -n "$exclude_expsyms"; then
@@ -2371,7 +3335,7 @@
 	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
 	      eval '$MV "$nlist"T "$nlist"'
 	      case $host in
-	        *cygwin | *mingw* | *cegcc* )
+	        *cygwin* | *mingw* | *cegcc* )
 	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
 	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
 	          ;;
@@ -2384,10 +3348,52 @@
 	  func_verbose "extracting global C symbols from \`$dlprefile'"
 	  func_basename "$dlprefile"
 	  name="$func_basename_result"
-	  $opt_dry_run || {
-	    eval '$ECHO ": $name " >> "$nlist"'
-	    eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
-	  }
+          case $host in
+	    *cygwin* | *mingw* | *cegcc* )
+	      # if an import library, we need to obtain dlname
+	      if func_win32_import_lib_p "$dlprefile"; then
+	        func_tr_sh "$dlprefile"
+	        eval "curr_lafile=\$libfile_$func_tr_sh_result"
+	        dlprefile_dlbasename=""
+	        if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
+	          # Use subshell, to avoid clobbering current variable values
+	          dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
+	          if test -n "$dlprefile_dlname" ; then
+	            func_basename "$dlprefile_dlname"
+	            dlprefile_dlbasename="$func_basename_result"
+	          else
+	            # no lafile. user explicitly requested -dlpreopen <import library>.
+	            $sharedlib_from_linklib_cmd "$dlprefile"
+	            dlprefile_dlbasename=$sharedlib_from_linklib_result
+	          fi
+	        fi
+	        $opt_dry_run || {
+	          if test -n "$dlprefile_dlbasename" ; then
+	            eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
+	          else
+	            func_warning "Could not compute DLL name from $name"
+	            eval '$ECHO ": $name " >> "$nlist"'
+	          fi
+	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
+	            $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
+	        }
+	      else # not an import lib
+	        $opt_dry_run || {
+	          eval '$ECHO ": $name " >> "$nlist"'
+	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	        }
+	      fi
+	    ;;
+	    *)
+	      $opt_dry_run || {
+	        eval '$ECHO ": $name " >> "$nlist"'
+	        func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	        eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	      }
+	    ;;
+          esac
 	done
 
 	$opt_dry_run || {
@@ -2415,36 +3421,19 @@
 	  if test -f "$nlist"S; then
 	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
 	  else
-	    $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
+	    echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
 	  fi
 
-	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+	  echo >> "$output_objdir/$my_dlsyms" "\
 
 /* The mapping between symbol names and symbols.  */
 typedef struct {
   const char *name;
   void *address;
 } lt_dlsymlist;
-"
-	  case $host in
-	  *cygwin* | *mingw* | *cegcc* )
-	    $ECHO >> "$output_objdir/$my_dlsyms" "\
-/* DATA imports from DLLs on WIN32 con't be const, because
-   runtime relocations are performed -- see ld's documentation
-   on pseudo-relocs.  */"
-	    lt_dlsym_const= ;;
-	  *osf5*)
-	    echo >> "$output_objdir/$my_dlsyms" "\
-/* This system does not cope well with relocations in const data */"
-	    lt_dlsym_const= ;;
-	  *)
-	    lt_dlsym_const=const ;;
-	  esac
-
-	  $ECHO >> "$output_objdir/$my_dlsyms" "\
-extern $lt_dlsym_const lt_dlsymlist
+extern LT_DLSYM_CONST lt_dlsymlist
 lt_${my_prefix}_LTX_preloaded_symbols[];
-$lt_dlsym_const lt_dlsymlist
+LT_DLSYM_CONST lt_dlsymlist
 lt_${my_prefix}_LTX_preloaded_symbols[] =
 {\
   { \"$my_originator\", (void *) 0 },"
@@ -2457,7 +3446,7 @@
 	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
 	    ;;
 	  esac
-	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+	  echo >> "$output_objdir/$my_dlsyms" "\
   {0, (void *) 0}
 };
 
@@ -2484,7 +3473,7 @@
 	  # linked before any other PIC object.  But we must not use
 	  # pic_flag when linking with -static.  The problem exists in
 	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	  *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
 	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
 	  *-*-hpux*)
 	    pic_flag_for_symtable=" $pic_flag"  ;;
@@ -2500,7 +3489,7 @@
 	for arg in $LTCFLAGS; do
 	  case $arg in
 	  -pie | -fpie | -fPIE) ;;
-	  *) symtab_cflags="$symtab_cflags $arg" ;;
+	  *) func_append symtab_cflags " $arg" ;;
 	  esac
 	done
 
@@ -2515,16 +3504,16 @@
 	case $host in
 	*cygwin* | *mingw* | *cegcc* )
 	  if test -f "$output_objdir/$my_outputname.def"; then
-	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
-	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
 	  else
-	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
-	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
 	  fi
 	  ;;
 	*)
-	  compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
-	  finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	  compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
 	  ;;
 	esac
 	;;
@@ -2538,8 +3527,8 @@
       # really was required.
 
       # Nullify the symbol file.
-      compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
-      finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+      compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
+      finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
     fi
 }
 
@@ -2549,6 +3538,7 @@
 # Need a lot of goo to handle *both* DLLs and import libs
 # Has to be a shell function in order to 'eat' the argument
 # that is supplied when $file_magic_command is called.
+# Despite the name, also deal with 64 bit binaries.
 func_win32_libid ()
 {
   $opt_debug
@@ -2559,9 +3549,11 @@
     win32_libid_type="x86 archive import"
     ;;
   *ar\ archive*) # could be an import, or static
+    # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
     if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
-       $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
-      win32_nmres=`eval $NM -f posix -A $1 |
+       $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+      func_to_tool_file "$1" func_convert_file_msys_to_w32
+      win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
 	$SED -n -e '
 	    1,100{
 		/ I /{
@@ -2590,6 +3582,131 @@
   $ECHO "$win32_libid_type"
 }
 
+# func_cygming_dll_for_implib ARG
+#
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+# Invoked by eval'ing the libtool variable
+#    $sharedlib_from_linklib_cmd
+# Result is available in the variable
+#    $sharedlib_from_linklib_result
+func_cygming_dll_for_implib ()
+{
+  $opt_debug
+  sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
+}
+
+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
+#
+# The is the core of a fallback implementation of a
+# platform-specific function to extract the name of the
+# DLL associated with the specified import library LIBNAME.
+#
+# SECTION_NAME is either .idata$6 or .idata$7, depending
+# on the platform and compiler that created the implib.
+#
+# Echos the name of the DLL associated with the
+# specified import library.
+func_cygming_dll_for_implib_fallback_core ()
+{
+  $opt_debug
+  match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
+  $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
+    $SED '/^Contents of section '"$match_literal"':/{
+      # Place marker at beginning of archive member dllname section
+      s/.*/====MARK====/
+      p
+      d
+    }
+    # These lines can sometimes be longer than 43 characters, but
+    # are always uninteresting
+    /:[	 ]*file format pe[i]\{,1\}-/d
+    /^In archive [^:]*:/d
+    # Ensure marker is printed
+    /^====MARK====/p
+    # Remove all lines with less than 43 characters
+    /^.\{43\}/!d
+    # From remaining lines, remove first 43 characters
+    s/^.\{43\}//' |
+    $SED -n '
+      # Join marker and all lines until next marker into a single line
+      /^====MARK====/ b para
+      H
+      $ b para
+      b
+      :para
+      x
+      s/\n//g
+      # Remove the marker
+      s/^====MARK====//
+      # Remove trailing dots and whitespace
+      s/[\. \t]*$//
+      # Print
+      /./p' |
+    # we now have a list, one entry per line, of the stringified
+    # contents of the appropriate section of all members of the
+    # archive which possess that section. Heuristic: eliminate
+    # all those which have a first or second character that is
+    # a '.' (that is, objdump's representation of an unprintable
+    # character.) This should work for all archives with less than
+    # 0x302f exports -- but will fail for DLLs whose name actually
+    # begins with a literal '.' or a single character followed by
+    # a '.'.
+    #
+    # Of those that remain, print the first one.
+    $SED -e '/^\./d;/^.\./d;q'
+}
+
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+  $opt_debug
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+  test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+  $opt_debug
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+  test -n "$func_cygming_ms_implib_tmp"
+}
+
+# func_cygming_dll_for_implib_fallback ARG
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+#
+# This fallback implementation is for use when $DLLTOOL
+# does not support the --identify-strict option.
+# Invoked by eval'ing the libtool variable
+#    $sharedlib_from_linklib_cmd
+# Result is available in the variable
+#    $sharedlib_from_linklib_result
+func_cygming_dll_for_implib_fallback ()
+{
+  $opt_debug
+  if func_cygming_gnu_implib_p "$1" ; then
+    # binutils import library
+    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
+  elif func_cygming_ms_implib_p "$1" ; then
+    # ms-generated import library
+    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
+  else
+    # unknown
+    sharedlib_from_linklib_result=""
+  fi
+}
 
 
 # func_extract_an_archive dir oldlib
@@ -2598,7 +3715,18 @@
     $opt_debug
     f_ex_an_ar_dir="$1"; shift
     f_ex_an_ar_oldlib="$1"
-    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
+    if test "$lock_old_archive_extraction" = yes; then
+      lockfile=$f_ex_an_ar_oldlib.lock
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    fi
+    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
+		   'stat=$?; rm -f "$lockfile"; exit $stat'
+    if test "$lock_old_archive_extraction" = yes; then
+      $opt_dry_run || rm -f "$lockfile"
+    fi
     if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
      :
     else
@@ -2669,7 +3797,7 @@
 	    darwin_file=
 	    darwin_files=
 	    for darwin_file in $darwin_filelist; do
-	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
 	      $LIPO -create -output "$darwin_file" $darwin_files
 	    done # $darwin_filelist
 	    $RM -rf unfat-$$
@@ -2684,25 +3812,30 @@
         func_extract_an_archive "$my_xdir" "$my_xabs"
 	;;
       esac
-      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
     done
 
     func_extract_archives_result="$my_oldobjs"
 }
 
 
-
-# func_emit_wrapper_part1 [arg=no]
+# func_emit_wrapper [arg=no]
 #
-# Emit the first part of a libtool wrapper script on stdout.
-# For more information, see the description associated with
-# func_emit_wrapper(), below.
-func_emit_wrapper_part1 ()
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable.  Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take.  If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory.  This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
 {
-	func_emit_wrapper_part1_arg1=no
-	if test -n "$1" ; then
-	  func_emit_wrapper_part1_arg1=$1
-	fi
+	func_emit_wrapper_arg1=${1-no}
 
 	$ECHO "\
 #! $SHELL
@@ -2718,7 +3851,6 @@
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
-Xsed='${SED} -e 1s/^X//'
 sed_quote_subst='$sed_quote_subst'
 
 # Be Bourne compatible
@@ -2749,31 +3881,135 @@
 else
   # When we are sourced in execute mode, \$file and \$ECHO are already set.
   if test \"\$libtool_execute_magic\" != \"$magic\"; then
-    ECHO=\"$qecho\"
-    file=\"\$0\"
-    # Make sure echo works.
-    if test \"X\$1\" = X--no-reexec; then
-      # Discard the --no-reexec flag, and continue.
-      shift
-    elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
-      # Yippee, \$ECHO works!
-      :
-    else
-      # Restart under the correct shell, and then maybe \$ECHO will work.
-      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
-    fi
-  fi\
+    file=\"\$0\""
+
+    qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
+    $ECHO "\
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+    ECHO=\"$qECHO\"
+  fi
+
+# Very basic option parsing. These options are (a) specific to
+# the libtool wrapper, (b) are identical between the wrapper
+# /script/ and the wrapper /executable/ which is used only on
+# windows platforms, and (c) all begin with the string "--lt-"
+# (application programs are unlikely to have options which match
+# this pattern).
+#
+# There are only two supported options: --lt-debug and
+# --lt-dump-script. There is, deliberately, no --lt-help.
+#
+# The first argument to this parsing function should be the
+# script's $0 value, followed by "$@".
+lt_option_debug=
+func_parse_lt_options ()
+{
+  lt_script_arg0=\$0
+  shift
+  for lt_opt
+  do
+    case \"\$lt_opt\" in
+    --lt-debug) lt_option_debug=1 ;;
+    --lt-dump-script)
+        lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
+        test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
+        lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
+        cat \"\$lt_dump_D/\$lt_dump_F\"
+        exit 0
+      ;;
+    --lt-*)
+        \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
+        exit 1
+      ;;
+    esac
+  done
+
+  # Print the debug banner immediately:
+  if test -n \"\$lt_option_debug\"; then
+    echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+  fi
+}
+
+# Used when --lt-debug. Prints its arguments to stdout
+# (redirection is the responsibility of the caller)
+func_lt_dump_args ()
+{
+  lt_dump_args_N=1;
+  for lt_arg
+  do
+    \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
+    lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
+  done
+}
+
+# Core function for launching the target application
+func_exec_program_core ()
+{
 "
-	$ECHO "\
+  case $host in
+  # Backslashes separate directories on plain windows
+  *-*-mingw | *-*-os2* | *-cegcc*)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+    ;;
+
+  *)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+    ;;
+  esac
+  $ECHO "\
+      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+      exit 1
+}
+
+# A function to encapsulate launching the target application
+# Strips options in the --lt-* namespace from \$@ and
+# launches target application with the remaining arguments.
+func_exec_program ()
+{
+  case \" \$* \" in
+  *\\ --lt-*)
+    for lt_wr_arg
+    do
+      case \$lt_wr_arg in
+      --lt-*) ;;
+      *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
+      esac
+      shift
+    done ;;
+  esac
+  func_exec_program_core \${1+\"\$@\"}
+}
+
+  # Parse options
+  func_parse_lt_options \"\$0\" \${1+\"\$@\"}
 
   # Find the directory that this script lives in.
-  thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+  thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
   test \"x\$thisdir\" = \"x\$file\" && thisdir=.
 
   # Follow symbolic links until we get to the real thisdir.
-  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
+  file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
   while test -n \"\$file\"; do
-    destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+    destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
 
     # If there was a directory component, then change thisdir.
     if test \"x\$destdir\" != \"x\$file\"; then
@@ -2783,30 +4019,13 @@
       esac
     fi
 
-    file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
-    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
+    file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
   done
-"
-}
-# end: func_emit_wrapper_part1
-
-# func_emit_wrapper_part2 [arg=no]
-#
-# Emit the second part of a libtool wrapper script on stdout.
-# For more information, see the description associated with
-# func_emit_wrapper(), below.
-func_emit_wrapper_part2 ()
-{
-	func_emit_wrapper_part2_arg1=no
-	if test -n "$1" ; then
-	  func_emit_wrapper_part2_arg1=$1
-	fi
-
-	$ECHO "\
 
   # Usually 'no', except on cygwin/mingw when embedded into
   # the cwrapper.
-  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
   if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
     # special case for '.'
     if test \"\$thisdir\" = \".\"; then
@@ -2814,7 +4033,7 @@
     fi
     # remove .libs from thisdir
     case \"\$thisdir\" in
-    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
+    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
     $objdir )   thisdir=. ;;
     esac
   fi
@@ -2869,6 +4088,18 @@
 
   if test -f \"\$progdir/\$program\"; then"
 
+	# fixup the dll searchpath if we need to.
+	#
+	# Fix the DLL searchpath if we need to.  Do this before prepending
+	# to shlibpath, because on Windows, both are PATH and uninstalled
+	# libraries must come first.
+	if test -n "$dllsearchpath"; then
+	  $ECHO "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+	fi
+
 	# Export our shlibpath_var if we have one.
 	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
 	  $ECHO "\
@@ -2877,254 +4108,29 @@
 
     # Some systems cannot cope with colon-terminated $shlibpath_var
     # The second colon is a workaround for a bug in BeOS R4 sed
-    $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+    $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
 
     export $shlibpath_var
 "
 	fi
 
-	# fixup the dll searchpath if we need to.
-	if test -n "$dllsearchpath"; then
-	  $ECHO "\
-    # Add the dll search path components to the executable PATH
-    PATH=$dllsearchpath:\$PATH
-"
-	fi
-
 	$ECHO "\
     if test \"\$libtool_execute_magic\" != \"$magic\"; then
       # Run the actual program with our arguments.
-"
-	case $host in
-	# Backslashes separate directories on plain windows
-	*-*-mingw | *-*-os2* | *-cegcc*)
-	  $ECHO "\
-      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
-	  ;;
-
-	*)
-	  $ECHO "\
-      exec \"\$progdir/\$program\" \${1+\"\$@\"}
-"
-	  ;;
-	esac
-	$ECHO "\
-      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
-      exit 1
+      func_exec_program \${1+\"\$@\"}
     fi
   else
     # The program doesn't exist.
     \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
     \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
-    $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+    \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
     exit 1
   fi
 fi\
 "
 }
-# end: func_emit_wrapper_part2
 
 
-# func_emit_wrapper [arg=no]
-#
-# Emit a libtool wrapper script on stdout.
-# Don't directly open a file because we may want to
-# incorporate the script contents within a cygwin/mingw
-# wrapper executable.  Must ONLY be called from within
-# func_mode_link because it depends on a number of variables
-# set therein.
-#
-# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
-# variable will take.  If 'yes', then the emitted script
-# will assume that the directory in which it is stored is
-# the $objdir directory.  This is a cygwin/mingw-specific
-# behavior.
-func_emit_wrapper ()
-{
-	func_emit_wrapper_arg1=no
-	if test -n "$1" ; then
-	  func_emit_wrapper_arg1=$1
-	fi
-
-	# split this up so that func_emit_cwrapperexe_src
-	# can call each part independently.
-	func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
-	func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
-}
-
-
-# func_to_host_path arg
-#
-# Convert paths to host format when used with build tools.
-# Intended for use with "native" mingw (where libtool itself
-# is running under the msys shell), or in the following cross-
-# build environments:
-#    $build          $host
-#    mingw (msys)    mingw  [e.g. native]
-#    cygwin          mingw
-#    *nix + wine     mingw
-# where wine is equipped with the `winepath' executable.
-# In the native mingw case, the (msys) shell automatically
-# converts paths for any non-msys applications it launches,
-# but that facility isn't available from inside the cwrapper.
-# Similar accommodations are necessary for $host mingw and
-# $build cygwin.  Calling this function does no harm for other
-# $host/$build combinations not listed above.
-#
-# ARG is the path (on $build) that should be converted to
-# the proper representation for $host. The result is stored
-# in $func_to_host_path_result.
-func_to_host_path ()
-{
-  func_to_host_path_result="$1"
-  if test -n "$1" ; then
-    case $host in
-      *mingw* )
-        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-        case $build in
-          *mingw* ) # actually, msys
-            # awkward: cmd appends spaces to result
-            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
-            func_to_host_path_tmp1=`( cmd //c echo "$1" |\
-              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
-            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
-              $SED -e "$lt_sed_naive_backslashify"`
-            ;;
-          *cygwin* )
-            func_to_host_path_tmp1=`cygpath -w "$1"`
-            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
-              $SED -e "$lt_sed_naive_backslashify"`
-            ;;
-          * )
-            # Unfortunately, winepath does not exit with a non-zero
-            # error code, so we are forced to check the contents of
-            # stdout. On the other hand, if the command is not
-            # found, the shell will set an exit code of 127 and print
-            # *an error message* to stdout. So we must check for both
-            # error code of zero AND non-empty stdout, which explains
-            # the odd construction:
-            func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
-            if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
-              func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
-                $SED -e "$lt_sed_naive_backslashify"`
-            else
-              # Allow warning below.
-              func_to_host_path_result=""
-            fi
-            ;;
-        esac
-        if test -z "$func_to_host_path_result" ; then
-          func_error "Could not determine host path corresponding to"
-          func_error "  '$1'"
-          func_error "Continuing, but uninstalled executables may not work."
-          # Fallback:
-          func_to_host_path_result="$1"
-        fi
-        ;;
-    esac
-  fi
-}
-# end: func_to_host_path
-
-# func_to_host_pathlist arg
-#
-# Convert pathlists to host format when used with build tools.
-# See func_to_host_path(), above. This function supports the
-# following $build/$host combinations (but does no harm for
-# combinations not listed here):
-#    $build          $host
-#    mingw (msys)    mingw  [e.g. native]
-#    cygwin          mingw
-#    *nix + wine     mingw
-#
-# Path separators are also converted from $build format to
-# $host format. If ARG begins or ends with a path separator
-# character, it is preserved (but converted to $host format)
-# on output.
-#
-# ARG is a pathlist (on $build) that should be converted to
-# the proper representation on $host. The result is stored
-# in $func_to_host_pathlist_result.
-func_to_host_pathlist ()
-{
-  func_to_host_pathlist_result="$1"
-  if test -n "$1" ; then
-    case $host in
-      *mingw* )
-        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-        # Remove leading and trailing path separator characters from
-        # ARG. msys behavior is inconsistent here, cygpath turns them
-        # into '.;' and ';.', and winepath ignores them completely.
-        func_to_host_pathlist_tmp2="$1"
-        # Once set for this call, this variable should not be
-        # reassigned. It is used in tha fallback case.
-        func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
-          $SED -e 's|^:*||' -e 's|:*$||'`
-        case $build in
-          *mingw* ) # Actually, msys.
-            # Awkward: cmd appends spaces to result.
-            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
-            func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
-              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
-            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
-              $SED -e "$lt_sed_naive_backslashify"`
-            ;;
-          *cygwin* )
-            func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
-            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
-              $SED -e "$lt_sed_naive_backslashify"`
-            ;;
-          * )
-            # unfortunately, winepath doesn't convert pathlists
-            func_to_host_pathlist_result=""
-            func_to_host_pathlist_oldIFS=$IFS
-            IFS=:
-            for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
-              IFS=$func_to_host_pathlist_oldIFS
-              if test -n "$func_to_host_pathlist_f" ; then
-                func_to_host_path "$func_to_host_pathlist_f"
-                if test -n "$func_to_host_path_result" ; then
-                  if test -z "$func_to_host_pathlist_result" ; then
-                    func_to_host_pathlist_result="$func_to_host_path_result"
-                  else
-                    func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
-                  fi
-                fi
-              fi
-              IFS=:
-            done
-            IFS=$func_to_host_pathlist_oldIFS
-            ;;
-        esac
-        if test -z "$func_to_host_pathlist_result" ; then
-          func_error "Could not determine the host path(s) corresponding to"
-          func_error "  '$1'"
-          func_error "Continuing, but uninstalled executables may not work."
-          # Fallback. This may break if $1 contains DOS-style drive
-          # specifications. The fix is not to complicate the expression
-          # below, but for the user to provide a working wine installation
-          # with winepath so that path translation in the cross-to-mingw
-          # case works properly.
-          lt_replace_pathsep_nix_to_dos="s|:|;|g"
-          func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
-            $SED -e "$lt_replace_pathsep_nix_to_dos"`
-        fi
-        # Now, add the leading and trailing path separators back
-        case "$1" in
-          :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
-            ;;
-        esac
-        case "$1" in
-          *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
-            ;;
-        esac
-        ;;
-    esac
-  fi
-}
-# end: func_to_host_pathlist
-
 # func_emit_cwrapperexe_src
 # emit the source code for a wrapper executable on stdout
 # Must ONLY be called from within func_mode_link because
@@ -3141,31 +4147,23 @@
 
    This wrapper executable should never be moved out of the build directory.
    If it is, it will not operate correctly.
-
-   Currently, it simply execs the wrapper *script* "$SHELL $output",
-   but could eventually absorb all of the scripts functionality and
-   exec $objdir/$outputname directly.
 */
 EOF
 	    cat <<"EOF"
+#ifdef _MSC_VER
+# define _CRT_SECURE_NO_DEPRECATE 1
+#endif
 #include <stdio.h>
 #include <stdlib.h>
 #ifdef _MSC_VER
 # include <direct.h>
 # include <process.h>
 # include <io.h>
-# define setmode _setmode
 #else
 # include <unistd.h>
 # include <stdint.h>
 # ifdef __CYGWIN__
 #  include <io.h>
-#  define HAVE_SETENV
-#  ifdef __STRICT_ANSI__
-char *realpath (const char *, char *);
-int putenv (char *);
-int setenv (const char *, const char *, int);
-#  endif
 # endif
 #endif
 #include <malloc.h>
@@ -3177,6 +4175,44 @@
 #include <fcntl.h>
 #include <sys/stat.h>
 
+/* declarations of non-ANSI functions */
+#if defined(__MINGW32__)
+# ifdef __STRICT_ANSI__
+int _putenv (const char *);
+# endif
+#elif defined(__CYGWIN__)
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+/* #elif defined (other platforms) ... */
+#endif
+
+/* portability defines, excluding path handling macros */
+#if defined(_MSC_VER)
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+# define S_IXUSR _S_IEXEC
+# ifndef _INTPTR_T_DEFINED
+#  define _INTPTR_T_DEFINED
+#  define intptr_t int
+# endif
+#elif defined(__MINGW32__)
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+#elif defined(__CYGWIN__)
+# define HAVE_SETENV
+# define FOPEN_WB "wb"
+/* #elif defined (other platforms) ... */
+#endif
+
 #if defined(PATH_MAX)
 # define LT_PATHMAX PATH_MAX
 #elif defined(MAXPATHLEN)
@@ -3192,14 +4228,7 @@
 # define S_IXGRP 0
 #endif
 
-#ifdef _MSC_VER
-# define S_IXUSR _S_IEXEC
-# define stat _stat
-# ifndef _INTPTR_T_DEFINED
-#  define intptr_t int
-# endif
-#endif
-
+/* path handling portability macros */
 #ifndef DIR_SEPARATOR
 # define DIR_SEPARATOR '/'
 # define PATH_SEPARATOR ':'
@@ -3230,10 +4259,6 @@
 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
 #endif /* PATH_SEPARATOR_2 */
 
-#ifdef __CYGWIN__
-# define FOPEN_WB "wb"
-#endif
-
 #ifndef FOPEN_WB
 # define FOPEN_WB "w"
 #endif
@@ -3246,22 +4271,13 @@
   if (stale) { free ((void *) stale); stale = 0; } \
 } while (0)
 
-#undef LTWRAPPER_DEBUGPRINTF
-#if defined DEBUGWRAPPER
-# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
-static void
-ltwrapper_debugprintf (const char *fmt, ...)
-{
-    va_list args;
-    va_start (args, fmt);
-    (void) vfprintf (stderr, fmt, args);
-    va_end (args);
-}
+#if defined(LT_DEBUGWRAPPER)
+static int lt_debug = 1;
 #else
-# define LTWRAPPER_DEBUGPRINTF(args)
+static int lt_debug = 0;
 #endif
 
-const char *program_name = NULL;
+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
 
 void *xmalloc (size_t num);
 char *xstrdup (const char *string);
@@ -3271,41 +4287,27 @@
 int make_executable (const char *path);
 int check_executable (const char *path);
 char *strendzap (char *str, const char *pat);
-void lt_fatal (const char *message, ...);
+void lt_debugprintf (const char *file, int line, const char *fmt, ...);
+void lt_fatal (const char *file, int line, const char *message, ...);
+static const char *nonnull (const char *s);
+static const char *nonempty (const char *s);
 void lt_setenv (const char *name, const char *value);
 char *lt_extend_str (const char *orig_value, const char *add, int to_end);
-void lt_opt_process_env_set (const char *arg);
-void lt_opt_process_env_prepend (const char *arg);
-void lt_opt_process_env_append (const char *arg);
-int lt_split_name_value (const char *arg, char** name, char** value);
 void lt_update_exe_path (const char *name, const char *value);
 void lt_update_lib_path (const char *name, const char *value);
-
-static const char *script_text_part1 =
+char **prepare_spawn (char **argv);
+void lt_dump_script (FILE *f);
 EOF
 
-	    func_emit_wrapper_part1 yes |
-	        $SED -e 's/\([\\"]\)/\\\1/g' \
-	             -e 's/^/  "/' -e 's/$/\\n"/'
-	    echo ";"
 	    cat <<EOF
-
-static const char *script_text_part2 =
-EOF
-	    func_emit_wrapper_part2 yes |
-	        $SED -e 's/\([\\"]\)/\\\1/g' \
-	             -e 's/^/  "/' -e 's/$/\\n"/'
-	    echo ";"
-
-	    cat <<EOF
-const char * MAGIC_EXE = "$magic_exe";
+volatile const char * MAGIC_EXE = "$magic_exe";
 const char * LIB_PATH_VARNAME = "$shlibpath_var";
 EOF
 
 	    if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-              func_to_host_pathlist "$temp_rpath"
+              func_to_host_path "$temp_rpath"
 	      cat <<EOF
-const char * LIB_PATH_VALUE   = "$func_to_host_pathlist_result";
+const char * LIB_PATH_VALUE   = "$func_to_host_path_result";
 EOF
 	    else
 	      cat <<"EOF"
@@ -3314,10 +4316,10 @@
 	    fi
 
 	    if test -n "$dllsearchpath"; then
-              func_to_host_pathlist "$dllsearchpath:"
+              func_to_host_path "$dllsearchpath:"
 	      cat <<EOF
 const char * EXE_PATH_VARNAME = "PATH";
-const char * EXE_PATH_VALUE   = "$func_to_host_pathlist_result";
+const char * EXE_PATH_VALUE   = "$func_to_host_path_result";
 EOF
 	    else
 	      cat <<"EOF"
@@ -3340,24 +4342,10 @@
 	    cat <<"EOF"
 
 #define LTWRAPPER_OPTION_PREFIX         "--lt-"
-#define LTWRAPPER_OPTION_PREFIX_LENGTH  5
 
-static const size_t opt_prefix_len         = LTWRAPPER_OPTION_PREFIX_LENGTH;
 static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
-
 static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
-
-static const size_t env_set_opt_len     = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
-static const char *env_set_opt          = LTWRAPPER_OPTION_PREFIX "env-set";
-  /* argument is putenv-style "foo=bar", value of foo is set to bar */
-
-static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
-static const char *env_prepend_opt      = LTWRAPPER_OPTION_PREFIX "env-prepend";
-  /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
-
-static const size_t env_append_opt_len  = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
-static const char *env_append_opt       = LTWRAPPER_OPTION_PREFIX "env-append";
-  /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
+static const char *debug_opt            = LTWRAPPER_OPTION_PREFIX "debug";
 
 int
 main (int argc, char *argv[])
@@ -3374,10 +4362,13 @@
   int i;
 
   program_name = (char *) xstrdup (base_name (argv[0]));
-  LTWRAPPER_DEBUGPRINTF (("(main) argv[0]      : %s\n", argv[0]));
-  LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
+  newargz = XMALLOC (char *, argc + 1);
 
-  /* very simple arg parsing; don't want to rely on getopt */
+  /* very simple arg parsing; don't want to rely on getopt
+   * also, copy all non cwrapper options to newargz, except
+   * argz[0], which is handled differently
+   */
+  newargc=0;
   for (i = 1; i < argc; i++)
     {
       if (strcmp (argv[i], dumpscript_opt) == 0)
@@ -3391,25 +4382,57 @@
 	      esac
 
 	    cat <<"EOF"
-	  printf ("%s", script_text_part1);
-	  printf ("%s", script_text_part2);
+	  lt_dump_script (stdout);
 	  return 0;
 	}
+      if (strcmp (argv[i], debug_opt) == 0)
+	{
+          lt_debug = 1;
+          continue;
+	}
+      if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
+        {
+          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+             namespace, but it is not one of the ones we know about and
+             have already dealt with, above (inluding dump-script), then
+             report an error. Otherwise, targets might begin to believe
+             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+             namespace. The first time any user complains about this, we'll
+             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+             or a configure.ac-settable value.
+           */
+          lt_fatal (__FILE__, __LINE__,
+		    "unrecognized %s option: '%s'",
+                    ltwrapper_option_prefix, argv[i]);
+        }
+      /* otherwise ... */
+      newargz[++newargc] = xstrdup (argv[i]);
     }
+  newargz[++newargc] = NULL;
 
-  newargz = XMALLOC (char *, argc + 1);
+EOF
+	    cat <<EOF
+  /* The GNU banner must be the first non-error debug message */
+  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
+EOF
+	    cat <<"EOF"
+  lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
+
   tmp_pathspec = find_executable (argv[0]);
   if (tmp_pathspec == NULL)
-    lt_fatal ("Couldn't find %s", argv[0]);
-  LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
-			  tmp_pathspec));
+    lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (before symlink chase) at: %s\n",
+		  tmp_pathspec);
 
   actual_cwrapper_path = chase_symlinks (tmp_pathspec);
-  LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
-			  actual_cwrapper_path));
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (after symlink chase) at: %s\n",
+		  actual_cwrapper_path);
   XFREE (tmp_pathspec);
 
-  actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
+  actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
   strendzap (actual_cwrapper_path, actual_cwrapper_name);
 
   /* wrapper name transforms */
@@ -3427,8 +4450,9 @@
   target_name = tmp_pathspec;
   tmp_pathspec = 0;
 
-  LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
-			  target_name));
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(main) libtool target name: %s\n",
+		  target_name);
 EOF
 
 	    cat <<EOF
@@ -3478,80 +4502,19 @@
 
   lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
   lt_setenv ("DUALCASE", "1");  /* for MSK sh */
-  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+  /* Update the DLL searchpath.  EXE_PATH_VALUE ($dllsearchpath) must
+     be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
+     because on Windows, both *_VARNAMEs are PATH but uninstalled
+     libraries must come first. */
   lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
 
-  newargc=0;
-  for (i = 1; i < argc; i++)
-    {
-      if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
-        {
-          if (argv[i][env_set_opt_len] == '=')
-            {
-              const char *p = argv[i] + env_set_opt_len + 1;
-              lt_opt_process_env_set (p);
-            }
-          else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
-            {
-              lt_opt_process_env_set (argv[++i]); /* don't copy */
-            }
-          else
-            lt_fatal ("%s missing required argument", env_set_opt);
-          continue;
-        }
-      if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
-        {
-          if (argv[i][env_prepend_opt_len] == '=')
-            {
-              const char *p = argv[i] + env_prepend_opt_len + 1;
-              lt_opt_process_env_prepend (p);
-            }
-          else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
-            {
-              lt_opt_process_env_prepend (argv[++i]); /* don't copy */
-            }
-          else
-            lt_fatal ("%s missing required argument", env_prepend_opt);
-          continue;
-        }
-      if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
-        {
-          if (argv[i][env_append_opt_len] == '=')
-            {
-              const char *p = argv[i] + env_append_opt_len + 1;
-              lt_opt_process_env_append (p);
-            }
-          else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
-            {
-              lt_opt_process_env_append (argv[++i]); /* don't copy */
-            }
-          else
-            lt_fatal ("%s missing required argument", env_append_opt);
-          continue;
-        }
-      if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
-        {
-          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
-             namespace, but it is not one of the ones we know about and
-             have already dealt with, above (inluding dump-script), then
-             report an error. Otherwise, targets might begin to believe
-             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
-             namespace. The first time any user complains about this, we'll
-             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
-             or a configure.ac-settable value.
-           */
-          lt_fatal ("Unrecognized option in %s namespace: '%s'",
-                    ltwrapper_option_prefix, argv[i]);
-        }
-      /* otherwise ... */
-      newargz[++newargc] = xstrdup (argv[i]);
-    }
-  newargz[++newargc] = NULL;
-
-  LTWRAPPER_DEBUGPRINTF     (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
+  lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
+		  nonnull (lt_argv_zero));
   for (i = 0; i < newargc; i++)
     {
-      LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d]   : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
+      lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
+		      i, nonnull (newargz[i]));
     }
 
 EOF
@@ -3560,11 +4523,14 @@
 	      mingw*)
 		cat <<"EOF"
   /* execv doesn't actually work on mingw as expected on unix */
+  newargz = prepare_spawn (newargz);
   rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
   if (rval == -1)
     {
       /* failed to start process */
-      LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
+      lt_debugprintf (__FILE__, __LINE__,
+		      "(main) failed to launch target \"%s\": %s\n",
+		      lt_argv_zero, nonnull (strerror (errno)));
       return 127;
     }
   return rval;
@@ -3586,7 +4552,7 @@
 {
   void *p = (void *) malloc (num);
   if (!p)
-    lt_fatal ("Memory exhausted");
+    lt_fatal (__FILE__, __LINE__, "memory exhausted");
 
   return p;
 }
@@ -3620,8 +4586,8 @@
 {
   struct stat st;
 
-  LTWRAPPER_DEBUGPRINTF (("(check_executable)  : %s\n",
-			  path ? (*path ? path : "EMPTY!") : "NULL!"));
+  lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
+                  nonempty (path));
   if ((!path) || (!*path))
     return 0;
 
@@ -3638,8 +4604,8 @@
   int rval = 0;
   struct stat st;
 
-  LTWRAPPER_DEBUGPRINTF (("(make_executable)   : %s\n",
-			  path ? (*path ? path : "EMPTY!") : "NULL!"));
+  lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
+                  nonempty (path));
   if ((!path) || (!*path))
     return 0;
 
@@ -3665,8 +4631,8 @@
   int tmp_len;
   char *concat_name;
 
-  LTWRAPPER_DEBUGPRINTF (("(find_executable)   : %s\n",
-			  wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
+  lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
+                  nonempty (wrapper));
 
   if ((wrapper == NULL) || (*wrapper == '\0'))
     return NULL;
@@ -3719,7 +4685,8 @@
 		{
 		  /* empty path: current directory */
 		  if (getcwd (tmp, LT_PATHMAX) == NULL)
-		    lt_fatal ("getcwd failed");
+		    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+                              nonnull (strerror (errno)));
 		  tmp_len = strlen (tmp);
 		  concat_name =
 		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
@@ -3744,7 +4711,8 @@
     }
   /* Relative path | not found in path: prepend cwd */
   if (getcwd (tmp, LT_PATHMAX) == NULL)
-    lt_fatal ("getcwd failed");
+    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+              nonnull (strerror (errno)));
   tmp_len = strlen (tmp);
   concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
   memcpy (concat_name, tmp, tmp_len);
@@ -3770,8 +4738,9 @@
   int has_symlinks = 0;
   while (strlen (tmp_pathspec) && !has_symlinks)
     {
-      LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
-			      tmp_pathspec));
+      lt_debugprintf (__FILE__, __LINE__,
+		      "checking path component for symlinks: %s\n",
+		      tmp_pathspec);
       if (lstat (tmp_pathspec, &s) == 0)
 	{
 	  if (S_ISLNK (s.st_mode) != 0)
@@ -3793,8 +4762,9 @@
 	}
       else
 	{
-	  char *errstr = strerror (errno);
-	  lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
+	  lt_fatal (__FILE__, __LINE__,
+		    "error accessing file \"%s\": %s",
+		    tmp_pathspec, nonnull (strerror (errno)));
 	}
     }
   XFREE (tmp_pathspec);
@@ -3807,7 +4777,8 @@
   tmp_pathspec = realpath (pathspec, buf);
   if (tmp_pathspec == 0)
     {
-      lt_fatal ("Could not follow symlinks for %s", pathspec);
+      lt_fatal (__FILE__, __LINE__,
+		"could not follow symlinks for %s", pathspec);
     }
   return xstrdup (tmp_pathspec);
 #endif
@@ -3833,11 +4804,25 @@
   return str;
 }
 
+void
+lt_debugprintf (const char *file, int line, const char *fmt, ...)
+{
+  va_list args;
+  if (lt_debug)
+    {
+      (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
+      va_start (args, fmt);
+      (void) vfprintf (stderr, fmt, args);
+      va_end (args);
+    }
+}
+
 static void
-lt_error_core (int exit_status, const char *mode,
+lt_error_core (int exit_status, const char *file,
+	       int line, const char *mode,
 	       const char *message, va_list ap)
 {
-  fprintf (stderr, "%s: %s: ", program_name, mode);
+  fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
   vfprintf (stderr, message, ap);
   fprintf (stderr, ".\n");
 
@@ -3846,20 +4831,32 @@
 }
 
 void
-lt_fatal (const char *message, ...)
+lt_fatal (const char *file, int line, const char *message, ...)
 {
   va_list ap;
   va_start (ap, message);
-  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
+  lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
   va_end (ap);
 }
 
+static const char *
+nonnull (const char *s)
+{
+  return s ? s : "(null)";
+}
+
+static const char *
+nonempty (const char *s)
+{
+  return (s && !*s) ? "(empty)" : nonnull (s);
+}
+
 void
 lt_setenv (const char *name, const char *value)
 {
-  LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
-                          (name ? name : "<NULL>"),
-                          (value ? value : "<NULL>")));
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_setenv) setting '%s' to '%s'\n",
+                  nonnull (name), nonnull (value));
   {
 #ifdef HAVE_SETENV
     /* always make a copy, for consistency with !HAVE_SETENV */
@@ -3904,95 +4901,12 @@
   return new_value;
 }
 
-int
-lt_split_name_value (const char *arg, char** name, char** value)
-{
-  const char *p;
-  int len;
-  if (!arg || !*arg)
-    return 1;
-
-  p = strchr (arg, (int)'=');
-
-  if (!p)
-    return 1;
-
-  *value = xstrdup (++p);
-
-  len = strlen (arg) - strlen (*value);
-  *name = XMALLOC (char, len);
-  strncpy (*name, arg, len-1);
-  (*name)[len - 1] = '\0';
-
-  return 0;
-}
-
-void
-lt_opt_process_env_set (const char *arg)
-{
-  char *name = NULL;
-  char *value = NULL;
-
-  if (lt_split_name_value (arg, &name, &value) != 0)
-    {
-      XFREE (name);
-      XFREE (value);
-      lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
-    }
-
-  lt_setenv (name, value);
-  XFREE (name);
-  XFREE (value);
-}
-
-void
-lt_opt_process_env_prepend (const char *arg)
-{
-  char *name = NULL;
-  char *value = NULL;
-  char *new_value = NULL;
-
-  if (lt_split_name_value (arg, &name, &value) != 0)
-    {
-      XFREE (name);
-      XFREE (value);
-      lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
-    }
-
-  new_value = lt_extend_str (getenv (name), value, 0);
-  lt_setenv (name, new_value);
-  XFREE (new_value);
-  XFREE (name);
-  XFREE (value);
-}
-
-void
-lt_opt_process_env_append (const char *arg)
-{
-  char *name = NULL;
-  char *value = NULL;
-  char *new_value = NULL;
-
-  if (lt_split_name_value (arg, &name, &value) != 0)
-    {
-      XFREE (name);
-      XFREE (value);
-      lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
-    }
-
-  new_value = lt_extend_str (getenv (name), value, 1);
-  lt_setenv (name, new_value);
-  XFREE (new_value);
-  XFREE (name);
-  XFREE (value);
-}
-
 void
 lt_update_exe_path (const char *name, const char *value)
 {
-  LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
-                          (name ? name : "<NULL>"),
-                          (value ? value : "<NULL>")));
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
 
   if (name && *name && value && *value)
     {
@@ -4011,9 +4925,9 @@
 void
 lt_update_lib_path (const char *name, const char *value)
 {
-  LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
-                          (name ? name : "<NULL>"),
-                          (value ? value : "<NULL>")));
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
 
   if (name && *name && value && *value)
     {
@@ -4023,11 +4937,158 @@
     }
 }
 
+EOF
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
 
+/* Prepares an argument vector before calling spawn().
+   Note that spawn() does not by itself call the command interpreter
+     (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
+      ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
+         GetVersionEx(&v);
+         v.dwPlatformId == VER_PLATFORM_WIN32_NT;
+      }) ? "cmd.exe" : "command.com").
+   Instead it simply concatenates the arguments, separated by ' ', and calls
+   CreateProcess().  We must quote the arguments since Win32 CreateProcess()
+   interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
+   special way:
+   - Space and tab are interpreted as delimiters. They are not treated as
+     delimiters if they are surrounded by double quotes: "...".
+   - Unescaped double quotes are removed from the input. Their only effect is
+     that within double quotes, space and tab are treated like normal
+     characters.
+   - Backslashes not followed by double quotes are not special.
+   - But 2*n+1 backslashes followed by a double quote become
+     n backslashes followed by a double quote (n >= 0):
+       \" -> "
+       \\\" -> \"
+       \\\\\" -> \\"
+ */
+#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+char **
+prepare_spawn (char **argv)
+{
+  size_t argc;
+  char **new_argv;
+  size_t i;
+
+  /* Count number of arguments.  */
+  for (argc = 0; argv[argc] != NULL; argc++)
+    ;
+
+  /* Allocate new argument vector.  */
+  new_argv = XMALLOC (char *, argc + 1);
+
+  /* Put quoted arguments into the new argument vector.  */
+  for (i = 0; i < argc; i++)
+    {
+      const char *string = argv[i];
+
+      if (string[0] == '\0')
+	new_argv[i] = xstrdup ("\"\"");
+      else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
+	{
+	  int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
+	  size_t length;
+	  unsigned int backslashes;
+	  const char *s;
+	  char *quoted_string;
+	  char *p;
+
+	  length = 0;
+	  backslashes = 0;
+	  if (quote_around)
+	    length++;
+	  for (s = string; *s != '\0'; s++)
+	    {
+	      char c = *s;
+	      if (c == '"')
+		length += backslashes + 1;
+	      length++;
+	      if (c == '\\')
+		backslashes++;
+	      else
+		backslashes = 0;
+	    }
+	  if (quote_around)
+	    length += backslashes + 1;
+
+	  quoted_string = XMALLOC (char, length + 1);
+
+	  p = quoted_string;
+	  backslashes = 0;
+	  if (quote_around)
+	    *p++ = '"';
+	  for (s = string; *s != '\0'; s++)
+	    {
+	      char c = *s;
+	      if (c == '"')
+		{
+		  unsigned int j;
+		  for (j = backslashes + 1; j > 0; j--)
+		    *p++ = '\\';
+		}
+	      *p++ = c;
+	      if (c == '\\')
+		backslashes++;
+	      else
+		backslashes = 0;
+	    }
+	  if (quote_around)
+	    {
+	      unsigned int j;
+	      for (j = backslashes; j > 0; j--)
+		*p++ = '\\';
+	      *p++ = '"';
+	    }
+	  *p = '\0';
+
+	  new_argv[i] = quoted_string;
+	}
+      else
+	new_argv[i] = (char *) string;
+    }
+  new_argv[argc] = NULL;
+
+  return new_argv;
+}
+EOF
+		;;
+	    esac
+
+            cat <<"EOF"
+void lt_dump_script (FILE* f)
+{
+EOF
+	    func_emit_wrapper yes |
+	      $SED -n -e '
+s/^\(.\{79\}\)\(..*\)/\1\
+\2/
+h
+s/\([\\"]\)/\\\1/g
+s/$/\\n/
+s/\([^\n]*\).*/  fputs ("\1", f);/p
+g
+D'
+            cat <<"EOF"
+}
 EOF
 }
 # end: func_emit_cwrapperexe_src
 
+# func_win32_import_lib_p ARG
+# True if ARG is an import lib, as indicated by $file_magic_cmd
+func_win32_import_lib_p ()
+{
+    $opt_debug
+    case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
+    *import*) : ;;
+    *) false ;;
+    esac
+}
+
 # func_mode_link arg...
 func_mode_link ()
 {
@@ -4072,6 +5133,7 @@
     new_inherited_linker_flags=
 
     avoid_version=no
+    bindir=
     dlfiles=
     dlprefiles=
     dlself=no
@@ -4164,6 +5226,11 @@
 	esac
 
 	case $prev in
+	bindir)
+	  bindir="$arg"
+	  prev=
+	  continue
+	  ;;
 	dlfiles|dlprefiles)
 	  if test "$preload" = no; then
 	    # Add the symbol object into the linking commands.
@@ -4195,9 +5262,9 @@
 	    ;;
 	  *)
 	    if test "$prev" = dlfiles; then
-	      dlfiles="$dlfiles $arg"
+	      func_append dlfiles " $arg"
 	    else
-	      dlprefiles="$dlprefiles $arg"
+	      func_append dlprefiles " $arg"
 	    fi
 	    prev=
 	    continue
@@ -4221,7 +5288,7 @@
 	    *-*-darwin*)
 	      case "$deplibs " in
 		*" $qarg.ltframework "*) ;;
-		*) deplibs="$deplibs $qarg.ltframework" # this is fixed later
+		*) func_append deplibs " $qarg.ltframework" # this is fixed later
 		   ;;
 	      esac
 	      ;;
@@ -4240,7 +5307,7 @@
 	    moreargs=
 	    for fil in `cat "$save_arg"`
 	    do
-#	      moreargs="$moreargs $fil"
+#	      func_append moreargs " $fil"
 	      arg=$fil
 	      # A libtool-controlled object.
 
@@ -4269,7 +5336,7 @@
 
 		  if test "$prev" = dlfiles; then
 		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-		      dlfiles="$dlfiles $pic_object"
+		      func_append dlfiles " $pic_object"
 		      prev=
 		      continue
 		    else
@@ -4281,7 +5348,7 @@
 		  # CHECK ME:  I think I busted this.  -Ossama
 		  if test "$prev" = dlprefiles; then
 		    # Preload the old-style object.
-		    dlprefiles="$dlprefiles $pic_object"
+		    func_append dlprefiles " $pic_object"
 		    prev=
 		  fi
 
@@ -4351,12 +5418,12 @@
 	  if test "$prev" = rpath; then
 	    case "$rpath " in
 	    *" $arg "*) ;;
-	    *) rpath="$rpath $arg" ;;
+	    *) func_append rpath " $arg" ;;
 	    esac
 	  else
 	    case "$xrpath " in
 	    *" $arg "*) ;;
-	    *) xrpath="$xrpath $arg" ;;
+	    *) func_append xrpath " $arg" ;;
 	    esac
 	  fi
 	  prev=
@@ -4368,28 +5435,28 @@
 	  continue
 	  ;;
 	weak)
-	  weak_libs="$weak_libs $arg"
+	  func_append weak_libs " $arg"
 	  prev=
 	  continue
 	  ;;
 	xcclinker)
-	  linker_flags="$linker_flags $qarg"
-	  compiler_flags="$compiler_flags $qarg"
+	  func_append linker_flags " $qarg"
+	  func_append compiler_flags " $qarg"
 	  prev=
 	  func_append compile_command " $qarg"
 	  func_append finalize_command " $qarg"
 	  continue
 	  ;;
 	xcompiler)
-	  compiler_flags="$compiler_flags $qarg"
+	  func_append compiler_flags " $qarg"
 	  prev=
 	  func_append compile_command " $qarg"
 	  func_append finalize_command " $qarg"
 	  continue
 	  ;;
 	xlinker)
-	  linker_flags="$linker_flags $qarg"
-	  compiler_flags="$compiler_flags $wl$qarg"
+	  func_append linker_flags " $qarg"
+	  func_append compiler_flags " $wl$qarg"
 	  prev=
 	  func_append compile_command " $wl$qarg"
 	  func_append finalize_command " $wl$qarg"
@@ -4425,6 +5492,11 @@
 	continue
 	;;
 
+      -bindir)
+	prev=bindir
+	continue
+	;;
+
       -dlopen)
 	prev=dlfiles
 	continue
@@ -4475,15 +5547,16 @@
 	;;
 
       -L*)
-	func_stripname '-L' '' "$arg"
-	dir=$func_stripname_result
-	if test -z "$dir"; then
+	func_stripname "-L" '' "$arg"
+	if test -z "$func_stripname_result"; then
 	  if test "$#" -gt 0; then
 	    func_fatal_error "require no space between \`-L' and \`$1'"
 	  else
 	    func_fatal_error "need path for \`-L' option"
 	  fi
 	fi
+	func_resolve_sysroot "$func_stripname_result"
+	dir=$func_resolve_sysroot_result
 	# We need an absolute path.
 	case $dir in
 	[\\/]* | [A-Za-z]:[\\/]*) ;;
@@ -4495,24 +5568,30 @@
 	  ;;
 	esac
 	case "$deplibs " in
-	*" -L$dir "*) ;;
+	*" -L$dir "* | *" $arg "*)
+	  # Will only happen for absolute or sysroot arguments
+	  ;;
 	*)
-	  deplibs="$deplibs -L$dir"
-	  lib_search_path="$lib_search_path $dir"
+	  # Preserve sysroot, but never include relative directories
+	  case $dir in
+	    [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
+	    *) func_append deplibs " -L$dir" ;;
+	  esac
+	  func_append lib_search_path " $dir"
 	  ;;
 	esac
 	case $host in
 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-	  testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
+	  testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
 	  case :$dllsearchpath: in
 	  *":$dir:"*) ;;
 	  ::) dllsearchpath=$dir;;
-	  *) dllsearchpath="$dllsearchpath:$dir";;
+	  *) func_append dllsearchpath ":$dir";;
 	  esac
 	  case :$dllsearchpath: in
 	  *":$testbindir:"*) ;;
 	  ::) dllsearchpath=$testbindir;;
-	  *) dllsearchpath="$dllsearchpath:$testbindir";;
+	  *) func_append dllsearchpath ":$testbindir";;
 	  esac
 	  ;;
 	esac
@@ -4522,7 +5601,7 @@
       -l*)
 	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
 	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
 	    # These systems don't actually have a C or math library (as such)
 	    continue
 	    ;;
@@ -4536,7 +5615,7 @@
 	    ;;
 	  *-*-rhapsody* | *-*-darwin1.[012])
 	    # Rhapsody C and math libraries are in the System framework
-	    deplibs="$deplibs System.ltframework"
+	    func_append deplibs " System.ltframework"
 	    continue
 	    ;;
 	  *-*-sco3.2v5* | *-*-sco5v6*)
@@ -4556,7 +5635,7 @@
 	   ;;
 	 esac
 	fi
-	deplibs="$deplibs $arg"
+	func_append deplibs " $arg"
 	continue
 	;;
 
@@ -4568,21 +5647,22 @@
       # Tru64 UNIX uses -model [arg] to determine the layout of C++
       # classes, name mangling, and exception handling.
       # Darwin uses the -arch flag to determine output architecture.
-      -model|-arch|-isysroot)
-	compiler_flags="$compiler_flags $arg"
+      -model|-arch|-isysroot|--sysroot)
+	func_append compiler_flags " $arg"
 	func_append compile_command " $arg"
 	func_append finalize_command " $arg"
 	prev=xcompiler
 	continue
 	;;
 
-      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
-	compiler_flags="$compiler_flags $arg"
+      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+      |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+	func_append compiler_flags " $arg"
 	func_append compile_command " $arg"
 	func_append finalize_command " $arg"
 	case "$new_inherited_linker_flags " in
 	    *" $arg "*) ;;
-	    * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
+	    * ) func_append new_inherited_linker_flags " $arg" ;;
 	esac
 	continue
 	;;
@@ -4649,13 +5729,17 @@
 	# We need an absolute path.
 	case $dir in
 	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	=*)
+	  func_stripname '=' '' "$dir"
+	  dir=$lt_sysroot$func_stripname_result
+	  ;;
 	*)
 	  func_fatal_error "only absolute run-paths are allowed"
 	  ;;
 	esac
 	case "$xrpath " in
 	*" $dir "*) ;;
-	*) xrpath="$xrpath $dir" ;;
+	*) func_append xrpath " $dir" ;;
 	esac
 	continue
 	;;
@@ -4708,8 +5792,8 @@
 	for flag in $args; do
 	  IFS="$save_ifs"
           func_quote_for_eval "$flag"
-	  arg="$arg $wl$func_quote_for_eval_result"
-	  compiler_flags="$compiler_flags $func_quote_for_eval_result"
+	  func_append arg " $func_quote_for_eval_result"
+	  func_append compiler_flags " $func_quote_for_eval_result"
 	done
 	IFS="$save_ifs"
 	func_stripname ' ' '' "$arg"
@@ -4724,9 +5808,9 @@
 	for flag in $args; do
 	  IFS="$save_ifs"
           func_quote_for_eval "$flag"
-	  arg="$arg $wl$func_quote_for_eval_result"
-	  compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
-	  linker_flags="$linker_flags $func_quote_for_eval_result"
+	  func_append arg " $wl$func_quote_for_eval_result"
+	  func_append compiler_flags " $wl$func_quote_for_eval_result"
+	  func_append linker_flags " $func_quote_for_eval_result"
 	done
 	IFS="$save_ifs"
 	func_stripname ' ' '' "$arg"
@@ -4754,23 +5838,27 @@
 	arg="$func_quote_for_eval_result"
 	;;
 
-      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
-      # -r[0-9][0-9]* specifies the processor on the SGI compiler
-      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
-      # +DA*, +DD* enable 64-bit mode on the HP compiler
-      # -q* pass through compiler args for the IBM compiler
-      # -m*, -t[45]*, -txscale* pass through architecture-specific
-      # compiler args for GCC
-      # -F/path gives path to uninstalled frameworks, gcc on darwin
-      # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
-      # @file GCC response files
+      # Flags to be passed through unchanged, with rationale:
+      # -64, -mips[0-9]      enable 64-bit mode for the SGI compiler
+      # -r[0-9][0-9]*        specify processor for the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
+      # +DA*, +DD*           enable 64-bit mode for the HP compiler
+      # -q*                  compiler args for the IBM compiler
+      # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
+      # -F/path              path to uninstalled frameworks, gcc on darwin
+      # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
+      # @file                GCC response files
+      # -tp=*                Portland pgcc target processor selection
+      # --sysroot=*          for sysroot support
+      # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
       -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
-      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
+      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
+      -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
         func_quote_for_eval "$arg"
 	arg="$func_quote_for_eval_result"
         func_append compile_command " $arg"
         func_append finalize_command " $arg"
-        compiler_flags="$compiler_flags $arg"
+        func_append compiler_flags " $arg"
         continue
         ;;
 
@@ -4782,7 +5870,7 @@
 
       *.$objext)
 	# A standard object.
-	objs="$objs $arg"
+	func_append objs " $arg"
 	;;
 
       *.lo)
@@ -4813,7 +5901,7 @@
 
 	    if test "$prev" = dlfiles; then
 	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-		dlfiles="$dlfiles $pic_object"
+		func_append dlfiles " $pic_object"
 		prev=
 		continue
 	      else
@@ -4825,7 +5913,7 @@
 	    # CHECK ME:  I think I busted this.  -Ossama
 	    if test "$prev" = dlprefiles; then
 	      # Preload the old-style object.
-	      dlprefiles="$dlprefiles $pic_object"
+	      func_append dlprefiles " $pic_object"
 	      prev=
 	    fi
 
@@ -4870,24 +5958,25 @@
 
       *.$libext)
 	# An archive.
-	deplibs="$deplibs $arg"
-	old_deplibs="$old_deplibs $arg"
+	func_append deplibs " $arg"
+	func_append old_deplibs " $arg"
 	continue
 	;;
 
       *.la)
 	# A libtool-controlled library.
 
+	func_resolve_sysroot "$arg"
 	if test "$prev" = dlfiles; then
 	  # This library was specified with -dlopen.
-	  dlfiles="$dlfiles $arg"
+	  func_append dlfiles " $func_resolve_sysroot_result"
 	  prev=
 	elif test "$prev" = dlprefiles; then
 	  # The library was specified with -dlpreopen.
-	  dlprefiles="$dlprefiles $arg"
+	  func_append dlprefiles " $func_resolve_sysroot_result"
 	  prev=
 	else
-	  deplibs="$deplibs $arg"
+	  func_append deplibs " $func_resolve_sysroot_result"
 	fi
 	continue
 	;;
@@ -4925,7 +6014,7 @@
 
     if test -n "$shlibpath_var"; then
       # get the directories listed in $shlibpath_var
-      eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+      eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
     else
       shlib_search_path=
     fi
@@ -4934,6 +6023,8 @@
 
     func_dirname "$output" "/" ""
     output_objdir="$func_dirname_result$objdir"
+    func_to_tool_file "$output_objdir/"
+    tool_output_objdir=$func_to_tool_file_result
     # Create the object directory.
     func_mkdir_p "$output_objdir"
 
@@ -4954,12 +6045,12 @@
     # Find all interdependent deplibs by searching for libraries
     # that are linked more than once (e.g. -la -lb -la)
     for deplib in $deplibs; do
-      if $opt_duplicate_deps ; then
+      if $opt_preserve_dup_deps ; then
 	case "$libs " in
-	*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	*" $deplib "*) func_append specialdeplibs " $deplib" ;;
 	esac
       fi
-      libs="$libs $deplib"
+      func_append libs " $deplib"
     done
 
     if test "$linkmode" = lib; then
@@ -4972,9 +6063,9 @@
       if $opt_duplicate_compiler_generated_deps; then
 	for pre_post_dep in $predeps $postdeps; do
 	  case "$pre_post_deps " in
-	  *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
+	  *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
 	  esac
-	  pre_post_deps="$pre_post_deps $pre_post_dep"
+	  func_append pre_post_deps " $pre_post_dep"
 	done
       fi
       pre_post_deps=
@@ -5041,17 +6132,19 @@
 	for lib in $dlprefiles; do
 	  # Ignore non-libtool-libs
 	  dependency_libs=
+	  func_resolve_sysroot "$lib"
 	  case $lib in
-	  *.la)	func_source "$lib" ;;
+	  *.la)	func_source "$func_resolve_sysroot_result" ;;
 	  esac
 
 	  # Collect preopened libtool deplibs, except any this library
 	  # has declared as weak libs
 	  for deplib in $dependency_libs; do
-            deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
+	    func_basename "$deplib"
+            deplib_base=$func_basename_result
 	    case " $weak_libs " in
 	    *" $deplib_base "*) ;;
-	    *) deplibs="$deplibs $deplib" ;;
+	    *) func_append deplibs " $deplib" ;;
 	    esac
 	  done
 	done
@@ -5067,16 +6160,17 @@
 	lib=
 	found=no
 	case $deplib in
-	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+        |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
 	  if test "$linkmode,$pass" = "prog,link"; then
 	    compile_deplibs="$deplib $compile_deplibs"
 	    finalize_deplibs="$deplib $finalize_deplibs"
 	  else
-	    compiler_flags="$compiler_flags $deplib"
+	    func_append compiler_flags " $deplib"
 	    if test "$linkmode" = lib ; then
 		case "$new_inherited_linker_flags " in
 		    *" $deplib "*) ;;
-		    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
+		    * ) func_append new_inherited_linker_flags " $deplib" ;;
 		esac
 	    fi
 	  fi
@@ -5161,7 +6255,7 @@
 	    if test "$linkmode" = lib ; then
 		case "$new_inherited_linker_flags " in
 		    *" $deplib "*) ;;
-		    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
+		    * ) func_append new_inherited_linker_flags " $deplib" ;;
 		esac
 	    fi
 	  fi
@@ -5174,7 +6268,8 @@
 	    test "$pass" = conv && continue
 	    newdependency_libs="$deplib $newdependency_libs"
 	    func_stripname '-L' '' "$deplib"
-	    newlib_search_path="$newlib_search_path $func_stripname_result"
+	    func_resolve_sysroot "$func_stripname_result"
+	    func_append newlib_search_path " $func_resolve_sysroot_result"
 	    ;;
 	  prog)
 	    if test "$pass" = conv; then
@@ -5188,7 +6283,8 @@
 	      finalize_deplibs="$deplib $finalize_deplibs"
 	    fi
 	    func_stripname '-L' '' "$deplib"
-	    newlib_search_path="$newlib_search_path $func_stripname_result"
+	    func_resolve_sysroot "$func_stripname_result"
+	    func_append newlib_search_path " $func_resolve_sysroot_result"
 	    ;;
 	  *)
 	    func_warning "\`-L' is ignored for archives/objects"
@@ -5199,17 +6295,21 @@
 	-R*)
 	  if test "$pass" = link; then
 	    func_stripname '-R' '' "$deplib"
-	    dir=$func_stripname_result
+	    func_resolve_sysroot "$func_stripname_result"
+	    dir=$func_resolve_sysroot_result
 	    # Make sure the xrpath contains only unique directories.
 	    case "$xrpath " in
 	    *" $dir "*) ;;
-	    *) xrpath="$xrpath $dir" ;;
+	    *) func_append xrpath " $dir" ;;
 	    esac
 	  fi
 	  deplibs="$deplib $deplibs"
 	  continue
 	  ;;
-	*.la) lib="$deplib" ;;
+	*.la)
+	  func_resolve_sysroot "$deplib"
+	  lib=$func_resolve_sysroot_result
+	  ;;
 	*.$libext)
 	  if test "$pass" = conv; then
 	    deplibs="$deplib $deplibs"
@@ -5227,7 +6327,7 @@
 		match_pattern*)
 		  set dummy $deplibs_check_method; shift
 		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
-		  if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
+		  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
 		    | $EGREP "$match_pattern_regex" > /dev/null; then
 		    valid_a_lib=yes
 		  fi
@@ -5237,15 +6337,15 @@
 		;;
 	      esac
 	      if test "$valid_a_lib" != yes; then
-		$ECHO
+		echo
 		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
-		$ECHO "*** I have the capability to make that library automatically link in when"
-		$ECHO "*** you link to this library.  But I can only do this if you have a"
-		$ECHO "*** shared version of the library, which you do not appear to have"
-		$ECHO "*** because the file extensions .$libext of this argument makes me believe"
-		$ECHO "*** that it is just a static archive that I should not use here."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because the file extensions .$libext of this argument makes me believe"
+		echo "*** that it is just a static archive that I should not use here."
 	      else
-		$ECHO
+		echo
 		$ECHO "*** Warning: Linking the shared library $output against the"
 		$ECHO "*** static library $deplib is not portable!"
 		deplibs="$deplib $deplibs"
@@ -5272,11 +6372,11 @@
 	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
 	      # If there is no dlopen support or we're linking statically,
 	      # we need to preload.
-	      newdlprefiles="$newdlprefiles $deplib"
+	      func_append newdlprefiles " $deplib"
 	      compile_deplibs="$deplib $compile_deplibs"
 	      finalize_deplibs="$deplib $finalize_deplibs"
 	    else
-	      newdlfiles="$newdlfiles $deplib"
+	      func_append newdlfiles " $deplib"
 	    fi
 	  fi
 	  continue
@@ -5318,20 +6418,20 @@
 
 	# Convert "-framework foo" to "foo.ltframework"
 	if test -n "$inherited_linker_flags"; then
-	  tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
+	  tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
 	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
 	    case " $new_inherited_linker_flags " in
 	      *" $tmp_inherited_linker_flag "*) ;;
-	      *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
+	      *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
 	    esac
 	  done
 	fi
-	dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
 	if test "$linkmode,$pass" = "lib,link" ||
 	   test "$linkmode,$pass" = "prog,scan" ||
 	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
-	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
-	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+	  test -n "$dlopen" && func_append dlfiles " $dlopen"
+	  test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
 	fi
 
 	if test "$pass" = conv; then
@@ -5342,20 +6442,20 @@
 	      func_fatal_error "cannot find name of link library for \`$lib'"
 	    fi
 	    # It is a libtool convenience library, so add in its objects.
-	    convenience="$convenience $ladir/$objdir/$old_library"
-	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
+	    func_append convenience " $ladir/$objdir/$old_library"
+	    func_append old_convenience " $ladir/$objdir/$old_library"
 	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
 	    func_fatal_error "\`$lib' is not a convenience library"
 	  fi
 	  tmp_libs=
 	  for deplib in $dependency_libs; do
 	    deplibs="$deplib $deplibs"
-	    if $opt_duplicate_deps ; then
+	    if $opt_preserve_dup_deps ; then
 	      case "$tmp_libs " in
-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
 	      esac
 	    fi
-	    tmp_libs="$tmp_libs $deplib"
+	    func_append tmp_libs " $deplib"
 	  done
 	  continue
 	fi # $pass = conv
@@ -5363,9 +6463,15 @@
 
 	# Get the name of the library we link against.
 	linklib=
-	for l in $old_library $library_names; do
-	  linklib="$l"
-	done
+	if test -n "$old_library" &&
+	   { test "$prefer_static_libs" = yes ||
+	     test "$prefer_static_libs,$installed" = "built,no"; }; then
+	  linklib=$old_library
+	else
+	  for l in $old_library $library_names; do
+	    linklib="$l"
+	  done
+	fi
 	if test -z "$linklib"; then
 	  func_fatal_error "cannot find name of link library for \`$lib'"
 	fi
@@ -5382,9 +6488,9 @@
 	    # statically, we need to preload.  We also need to preload any
 	    # dependent libraries so libltdl's deplib preloader doesn't
 	    # bomb out in the load deplibs phase.
-	    dlprefiles="$dlprefiles $lib $dependency_libs"
+	    func_append dlprefiles " $lib $dependency_libs"
 	  else
-	    newdlfiles="$newdlfiles $lib"
+	    func_append newdlfiles " $lib"
 	  fi
 	  continue
 	fi # $pass = dlopen
@@ -5406,14 +6512,14 @@
 
 	# Find the relevant object directory and library name.
 	if test "X$installed" = Xyes; then
-	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	  if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
 	    func_warning "library \`$lib' was moved."
 	    dir="$ladir"
 	    absdir="$abs_ladir"
 	    libdir="$abs_ladir"
 	  else
-	    dir="$libdir"
-	    absdir="$libdir"
+	    dir="$lt_sysroot$libdir"
+	    absdir="$lt_sysroot$libdir"
 	  fi
 	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
 	else
@@ -5421,12 +6527,12 @@
 	    dir="$ladir"
 	    absdir="$abs_ladir"
 	    # Remove this search path later
-	    notinst_path="$notinst_path $abs_ladir"
+	    func_append notinst_path " $abs_ladir"
 	  else
 	    dir="$ladir/$objdir"
 	    absdir="$abs_ladir/$objdir"
 	    # Remove this search path later
-	    notinst_path="$notinst_path $abs_ladir"
+	    func_append notinst_path " $abs_ladir"
 	  fi
 	fi # $installed = yes
 	func_stripname 'lib' '.la' "$laname"
@@ -5437,20 +6543,46 @@
 	  if test -z "$libdir" && test "$linkmode" = prog; then
 	    func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
 	  fi
-	  # Prefer using a static library (so that no silly _DYNAMIC symbols
-	  # are required to link).
-	  if test -n "$old_library"; then
-	    newdlprefiles="$newdlprefiles $dir/$old_library"
-	    # Keep a list of preopened convenience libraries to check
-	    # that they are being used correctly in the link pass.
-	    test -z "$libdir" && \
-		dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
-	  # Otherwise, use the dlname, so that lt_dlopen finds it.
-	  elif test -n "$dlname"; then
-	    newdlprefiles="$newdlprefiles $dir/$dlname"
-	  else
-	    newdlprefiles="$newdlprefiles $dir/$linklib"
-	  fi
+	  case "$host" in
+	    # special handling for platforms with PE-DLLs.
+	    *cygwin* | *mingw* | *cegcc* )
+	      # Linker will automatically link against shared library if both
+	      # static and shared are present.  Therefore, ensure we extract
+	      # symbols from the import library if a shared library is present
+	      # (otherwise, the dlopen module name will be incorrect).  We do
+	      # this by putting the import library name into $newdlprefiles.
+	      # We recover the dlopen module name by 'saving' the la file
+	      # name in a special purpose variable, and (later) extracting the
+	      # dlname from the la file.
+	      if test -n "$dlname"; then
+	        func_tr_sh "$dir/$linklib"
+	        eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
+	        func_append newdlprefiles " $dir/$linklib"
+	      else
+	        func_append newdlprefiles " $dir/$old_library"
+	        # Keep a list of preopened convenience libraries to check
+	        # that they are being used correctly in the link pass.
+	        test -z "$libdir" && \
+	          func_append dlpreconveniencelibs " $dir/$old_library"
+	      fi
+	    ;;
+	    * )
+	      # Prefer using a static library (so that no silly _DYNAMIC symbols
+	      # are required to link).
+	      if test -n "$old_library"; then
+	        func_append newdlprefiles " $dir/$old_library"
+	        # Keep a list of preopened convenience libraries to check
+	        # that they are being used correctly in the link pass.
+	        test -z "$libdir" && \
+	          func_append dlpreconveniencelibs " $dir/$old_library"
+	      # Otherwise, use the dlname, so that lt_dlopen finds it.
+	      elif test -n "$dlname"; then
+	        func_append newdlprefiles " $dir/$dlname"
+	      else
+	        func_append newdlprefiles " $dir/$linklib"
+	      fi
+	    ;;
+	  esac
 	fi # $pass = dlpreopen
 
 	if test -z "$libdir"; then
@@ -5468,7 +6600,7 @@
 
 
 	if test "$linkmode" = prog && test "$pass" != link; then
-	  newlib_search_path="$newlib_search_path $ladir"
+	  func_append newlib_search_path " $ladir"
 	  deplibs="$lib $deplibs"
 
 	  linkalldeplibs=no
@@ -5481,7 +6613,8 @@
 	  for deplib in $dependency_libs; do
 	    case $deplib in
 	    -L*) func_stripname '-L' '' "$deplib"
-	         newlib_search_path="$newlib_search_path $func_stripname_result"
+	         func_resolve_sysroot "$func_stripname_result"
+	         func_append newlib_search_path " $func_resolve_sysroot_result"
 		 ;;
 	    esac
 	    # Need to link against all dependency_libs?
@@ -5492,12 +6625,12 @@
 	      # or/and link against static libraries
 	      newdependency_libs="$deplib $newdependency_libs"
 	    fi
-	    if $opt_duplicate_deps ; then
+	    if $opt_preserve_dup_deps ; then
 	      case "$tmp_libs " in
-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
 	      esac
 	    fi
-	    tmp_libs="$tmp_libs $deplib"
+	    func_append tmp_libs " $deplib"
 	  done # for deplib
 	  continue
 	fi # $linkmode = prog...
@@ -5512,7 +6645,7 @@
 	      # Make sure the rpath contains only unique directories.
 	      case "$temp_rpath:" in
 	      *"$absdir:"*) ;;
-	      *) temp_rpath="$temp_rpath$absdir:" ;;
+	      *) func_append temp_rpath "$absdir:" ;;
 	      esac
 	    fi
 
@@ -5524,7 +6657,7 @@
 	    *)
 	      case "$compile_rpath " in
 	      *" $absdir "*) ;;
-	      *) compile_rpath="$compile_rpath $absdir"
+	      *) func_append compile_rpath " $absdir" ;;
 	      esac
 	      ;;
 	    esac
@@ -5533,7 +6666,7 @@
 	    *)
 	      case "$finalize_rpath " in
 	      *" $libdir "*) ;;
-	      *) finalize_rpath="$finalize_rpath $libdir"
+	      *) func_append finalize_rpath " $libdir" ;;
 	      esac
 	      ;;
 	    esac
@@ -5558,12 +6691,12 @@
 	  case $host in
 	  *cygwin* | *mingw* | *cegcc*)
 	      # No point in relinking DLLs because paths are not encoded
-	      notinst_deplibs="$notinst_deplibs $lib"
+	      func_append notinst_deplibs " $lib"
 	      need_relink=no
 	    ;;
 	  *)
 	    if test "$installed" = no; then
-	      notinst_deplibs="$notinst_deplibs $lib"
+	      func_append notinst_deplibs " $lib"
 	      need_relink=yes
 	    fi
 	    ;;
@@ -5580,7 +6713,7 @@
 	    fi
 	  done
 	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
-	    $ECHO
+	    echo
 	    if test "$linkmode" = prog; then
 	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
 	    else
@@ -5598,7 +6731,7 @@
 	    *)
 	      case "$compile_rpath " in
 	      *" $absdir "*) ;;
-	      *) compile_rpath="$compile_rpath $absdir"
+	      *) func_append compile_rpath " $absdir" ;;
 	      esac
 	      ;;
 	    esac
@@ -5607,7 +6740,7 @@
 	    *)
 	      case "$finalize_rpath " in
 	      *" $libdir "*) ;;
-	      *) finalize_rpath="$finalize_rpath $libdir"
+	      *) func_append finalize_rpath " $libdir" ;;
 	      esac
 	      ;;
 	    esac
@@ -5661,7 +6794,7 @@
 	    linklib=$newlib
 	  fi # test -n "$old_archive_from_expsyms_cmds"
 
-	  if test "$linkmode" = prog || test "$mode" != relink; then
+	  if test "$linkmode" = prog || test "$opt_mode" != relink; then
 	    add_shlibpath=
 	    add_dir=
 	    add=
@@ -5683,9 +6816,9 @@
 		      if test "X$dlopenmodule" != "X$lib"; then
 			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
 			if test -z "$old_library" ; then
-			  $ECHO
-			  $ECHO "*** And there doesn't seem to be a static archive available"
-			  $ECHO "*** The link will probably fail, sorry"
+			  echo
+			  echo "*** And there doesn't seem to be a static archive available"
+			  echo "*** The link will probably fail, sorry"
 			else
 			  add="$dir/$old_library"
 			fi
@@ -5712,12 +6845,12 @@
 	         test "$hardcode_direct_absolute" = no; then
 		add="$dir/$linklib"
 	      elif test "$hardcode_minus_L" = yes; then
-		add_dir="-L$dir"
+		add_dir="-L$absdir"
 		# Try looking first in the location we're being installed to.
 		if test -n "$inst_prefix_dir"; then
 		  case $libdir in
 		    [\\/]*)
-		      add_dir="$add_dir -L$inst_prefix_dir$libdir"
+		      func_append add_dir " -L$inst_prefix_dir$libdir"
 		      ;;
 		  esac
 		fi
@@ -5739,7 +6872,7 @@
 	    if test -n "$add_shlibpath"; then
 	      case :$compile_shlibpath: in
 	      *":$add_shlibpath:"*) ;;
-	      *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
+	      *) func_append compile_shlibpath "$add_shlibpath:" ;;
 	      esac
 	    fi
 	    if test "$linkmode" = prog; then
@@ -5753,13 +6886,13 @@
 		 test "$hardcode_shlibpath_var" = yes; then
 		case :$finalize_shlibpath: in
 		*":$libdir:"*) ;;
-		*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+		*) func_append finalize_shlibpath "$libdir:" ;;
 		esac
 	      fi
 	    fi
 	  fi
 
-	  if test "$linkmode" = prog || test "$mode" = relink; then
+	  if test "$linkmode" = prog || test "$opt_mode" = relink; then
 	    add_shlibpath=
 	    add_dir=
 	    add=
@@ -5773,7 +6906,7 @@
 	    elif test "$hardcode_shlibpath_var" = yes; then
 	      case :$finalize_shlibpath: in
 	      *":$libdir:"*) ;;
-	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+	      *) func_append finalize_shlibpath "$libdir:" ;;
 	      esac
 	      add="-l$name"
 	    elif test "$hardcode_automatic" = yes; then
@@ -5790,7 +6923,7 @@
 	      if test -n "$inst_prefix_dir"; then
 		case $libdir in
 		  [\\/]*)
-		    add_dir="$add_dir -L$inst_prefix_dir$libdir"
+		    func_append add_dir " -L$inst_prefix_dir$libdir"
 		    ;;
 		esac
 	      fi
@@ -5825,21 +6958,21 @@
 
 	    # Just print a warning and add the library to dependency_libs so
 	    # that the program can be linked against the static library.
-	    $ECHO
+	    echo
 	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
-	    $ECHO "*** I have the capability to make that library automatically link in when"
-	    $ECHO "*** you link to this library.  But I can only do this if you have a"
-	    $ECHO "*** shared version of the library, which you do not appear to have."
+	    echo "*** I have the capability to make that library automatically link in when"
+	    echo "*** you link to this library.  But I can only do this if you have a"
+	    echo "*** shared version of the library, which you do not appear to have."
 	    if test "$module" = yes; then
-	      $ECHO "*** But as you try to build a module library, libtool will still create "
-	      $ECHO "*** a static module, that should work as long as the dlopening application"
-	      $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
+	      echo "*** But as you try to build a module library, libtool will still create "
+	      echo "*** a static module, that should work as long as the dlopening application"
+	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
 	      if test -z "$global_symbol_pipe"; then
-		$ECHO
-		$ECHO "*** However, this would only work if libtool was able to extract symbol"
-		$ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
-		$ECHO "*** not find such a program.  So, this module is probably useless."
-		$ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
+		echo
+		echo "*** However, this would only work if libtool was able to extract symbol"
+		echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+		echo "*** not find such a program.  So, this module is probably useless."
+		echo "*** \`nm' from GNU binutils and a full rebuild may help."
 	      fi
 	      if test "$build_old_libs" = no; then
 		build_libtool_libs=module
@@ -5867,37 +7000,46 @@
 	           temp_xrpath=$func_stripname_result
 		   case " $xrpath " in
 		   *" $temp_xrpath "*) ;;
-		   *) xrpath="$xrpath $temp_xrpath";;
+		   *) func_append xrpath " $temp_xrpath";;
 		   esac;;
-	      *) temp_deplibs="$temp_deplibs $libdir";;
+	      *) func_append temp_deplibs " $libdir";;
 	      esac
 	    done
 	    dependency_libs="$temp_deplibs"
 	  fi
 
-	  newlib_search_path="$newlib_search_path $absdir"
+	  func_append newlib_search_path " $absdir"
 	  # Link against this library
 	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
 	  # ... and its dependency_libs
 	  tmp_libs=
 	  for deplib in $dependency_libs; do
 	    newdependency_libs="$deplib $newdependency_libs"
-	    if $opt_duplicate_deps ; then
+	    case $deplib in
+              -L*) func_stripname '-L' '' "$deplib"
+                   func_resolve_sysroot "$func_stripname_result";;
+              *) func_resolve_sysroot "$deplib" ;;
+            esac
+	    if $opt_preserve_dup_deps ; then
 	      case "$tmp_libs " in
-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	      *" $func_resolve_sysroot_result "*)
+                func_append specialdeplibs " $func_resolve_sysroot_result" ;;
 	      esac
 	    fi
-	    tmp_libs="$tmp_libs $deplib"
+	    func_append tmp_libs " $func_resolve_sysroot_result"
 	  done
 
 	  if test "$link_all_deplibs" != no; then
 	    # Add the search paths of all dependency libraries
 	    for deplib in $dependency_libs; do
+	      path=
 	      case $deplib in
 	      -L*) path="$deplib" ;;
 	      *.la)
+	        func_resolve_sysroot "$deplib"
+	        deplib=$func_resolve_sysroot_result
 	        func_dirname "$deplib" "" "."
-		dir="$func_dirname_result"
+		dir=$func_dirname_result
 		# We need an absolute path.
 		case $dir in
 		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
@@ -5924,8 +7066,8 @@
                       if test -z "$darwin_install_name"; then
                           darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
                       fi
-		      compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
-		      linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
+		      func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+		      func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
 		      path=
 		    fi
 		  fi
@@ -5958,7 +7100,7 @@
 	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
 	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
 	else
-	  compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
 	fi
       fi
       dependency_libs="$newdependency_libs"
@@ -5975,7 +7117,7 @@
 	  for dir in $newlib_search_path; do
 	    case "$lib_search_path " in
 	    *" $dir "*) ;;
-	    *) lib_search_path="$lib_search_path $dir" ;;
+	    *) func_append lib_search_path " $dir" ;;
 	    esac
 	  done
 	  newlib_search_path=
@@ -6033,10 +7175,10 @@
 	    -L*)
 	      case " $tmp_libs " in
 	      *" $deplib "*) ;;
-	      *) tmp_libs="$tmp_libs $deplib" ;;
+	      *) func_append tmp_libs " $deplib" ;;
 	      esac
 	      ;;
-	    *) tmp_libs="$tmp_libs $deplib" ;;
+	    *) func_append tmp_libs " $deplib" ;;
 	    esac
 	  done
 	  eval $var=\"$tmp_libs\"
@@ -6052,7 +7194,7 @@
 	  ;;
 	esac
 	if test -n "$i" ; then
-	  tmp_libs="$tmp_libs $i"
+	  func_append tmp_libs " $i"
 	fi
       done
       dependency_libs=$tmp_libs
@@ -6093,7 +7235,7 @@
       # Now set the variables for building old libraries.
       build_libtool_libs=no
       oldlibs="$output"
-      objs="$objs$old_deplibs"
+      func_append objs "$old_deplibs"
       ;;
 
     lib)
@@ -6126,10 +7268,10 @@
 	if test "$deplibs_check_method" != pass_all; then
 	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
 	else
-	  $ECHO
+	  echo
 	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
 	  $ECHO "*** objects $objs is not portable!"
-	  libobjs="$libobjs $objs"
+	  func_append libobjs " $objs"
 	fi
       fi
 
@@ -6188,13 +7330,14 @@
 	  # which has an extra 1 added just for fun
 	  #
 	  case $version_type in
+	  # correct linux to gnu/linux during the next big refactor
 	  darwin|linux|osf|windows|none)
 	    func_arith $number_major + $number_minor
 	    current=$func_arith_result
 	    age="$number_minor"
 	    revision="$number_revision"
 	    ;;
-	  freebsd-aout|freebsd-elf|sunos)
+	  freebsd-aout|freebsd-elf|qnx|sunos)
 	    current="$number_major"
 	    revision="$number_minor"
 	    age="0"
@@ -6304,7 +7447,7 @@
 	  versuffix="$major.$revision"
 	  ;;
 
-	linux)
+	linux) # correct to gnu/linux during the next big refactor
 	  func_arith $current - $age
 	  major=.$func_arith_result
 	  versuffix="$major.$age.$revision"
@@ -6327,7 +7470,7 @@
 	  done
 
 	  # Make executables depend on our current version.
-	  verstring="$verstring:${current}.0"
+	  func_append verstring ":${current}.0"
 	  ;;
 
 	qnx)
@@ -6395,10 +7538,10 @@
       fi
 
       func_generate_dlsyms "$libname" "$libname" "yes"
-      libobjs="$libobjs $symfileobj"
+      func_append libobjs " $symfileobj"
       test "X$libobjs" = "X " && libobjs=
 
-      if test "$mode" != relink; then
+      if test "$opt_mode" != relink; then
 	# Remove our outputs, but don't remove object files since they
 	# may have been created when compiling PIC objects.
 	removelist=
@@ -6414,7 +7557,7 @@
 		   continue
 		 fi
 	       fi
-	       removelist="$removelist $p"
+	       func_append removelist " $p"
 	       ;;
 	    *) ;;
 	  esac
@@ -6425,27 +7568,28 @@
 
       # Now set the variables for building old libraries.
       if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
-	oldlibs="$oldlibs $output_objdir/$libname.$libext"
+	func_append oldlibs " $output_objdir/$libname.$libext"
 
 	# Transform .lo files to .o files.
-	oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
       fi
 
       # Eliminate all temporary directories.
       #for path in $notinst_path; do
-      #	lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
-      #	deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
-      #	dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
+      #	lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
+      #	deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
+      #	dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
       #done
 
       if test -n "$xrpath"; then
 	# If the user specified any rpath flags, then add them.
 	temp_xrpath=
 	for libdir in $xrpath; do
-	  temp_xrpath="$temp_xrpath -R$libdir"
+	  func_replace_sysroot "$libdir"
+	  func_append temp_xrpath " -R$func_replace_sysroot_result"
 	  case "$finalize_rpath " in
 	  *" $libdir "*) ;;
-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+	  *) func_append finalize_rpath " $libdir" ;;
 	  esac
 	done
 	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
@@ -6459,7 +7603,7 @@
       for lib in $old_dlfiles; do
 	case " $dlprefiles $dlfiles " in
 	*" $lib "*) ;;
-	*) dlfiles="$dlfiles $lib" ;;
+	*) func_append dlfiles " $lib" ;;
 	esac
       done
 
@@ -6469,19 +7613,19 @@
       for lib in $old_dlprefiles; do
 	case "$dlprefiles " in
 	*" $lib "*) ;;
-	*) dlprefiles="$dlprefiles $lib" ;;
+	*) func_append dlprefiles " $lib" ;;
 	esac
       done
 
       if test "$build_libtool_libs" = yes; then
 	if test -n "$rpath"; then
 	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
 	    # these systems don't actually have a c library (as such)!
 	    ;;
 	  *-*-rhapsody* | *-*-darwin1.[012])
 	    # Rhapsody C library is in the System framework
-	    deplibs="$deplibs System.ltframework"
+	    func_append deplibs " System.ltframework"
 	    ;;
 	  *-*-netbsd*)
 	    # Don't link with libc until the a.out ld.so is fixed.
@@ -6498,7 +7642,7 @@
 	  *)
 	    # Add libc to deplibs on all other systems if necessary.
 	    if test "$build_libtool_need_lc" = "yes"; then
-	      deplibs="$deplibs -lc"
+	      func_append deplibs " -lc"
 	    fi
 	    ;;
 	  esac
@@ -6547,7 +7691,7 @@
 		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		  case " $predeps $postdeps " in
 		  *" $i "*)
-		    newdeplibs="$newdeplibs $i"
+		    func_append newdeplibs " $i"
 		    i=""
 		    ;;
 		  esac
@@ -6558,21 +7702,21 @@
 		  set dummy $deplib_matches; shift
 		  deplib_match=$1
 		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		    newdeplibs="$newdeplibs $i"
+		    func_append newdeplibs " $i"
 		  else
 		    droppeddeps=yes
-		    $ECHO
+		    echo
 		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
-		    $ECHO "*** I have the capability to make that library automatically link in when"
-		    $ECHO "*** you link to this library.  But I can only do this if you have a"
-		    $ECHO "*** shared version of the library, which I believe you do not have"
-		    $ECHO "*** because a test_compile did reveal that the linker did not use it for"
-		    $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
+		    echo "*** I have the capability to make that library automatically link in when"
+		    echo "*** you link to this library.  But I can only do this if you have a"
+		    echo "*** shared version of the library, which I believe you do not have"
+		    echo "*** because a test_compile did reveal that the linker did not use it for"
+		    echo "*** its dynamic dependency list that programs get resolved with at runtime."
 		  fi
 		fi
 		;;
 	      *)
-		newdeplibs="$newdeplibs $i"
+		func_append newdeplibs " $i"
 		;;
 	      esac
 	    done
@@ -6590,7 +7734,7 @@
 		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		    case " $predeps $postdeps " in
 		    *" $i "*)
-		      newdeplibs="$newdeplibs $i"
+		      func_append newdeplibs " $i"
 		      i=""
 		      ;;
 		    esac
@@ -6601,29 +7745,29 @@
 		    set dummy $deplib_matches; shift
 		    deplib_match=$1
 		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		      newdeplibs="$newdeplibs $i"
+		      func_append newdeplibs " $i"
 		    else
 		      droppeddeps=yes
-		      $ECHO
+		      echo
 		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
-		      $ECHO "*** I have the capability to make that library automatically link in when"
-		      $ECHO "*** you link to this library.  But I can only do this if you have a"
-		      $ECHO "*** shared version of the library, which you do not appear to have"
-		      $ECHO "*** because a test_compile did reveal that the linker did not use this one"
-		      $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
+		      echo "*** I have the capability to make that library automatically link in when"
+		      echo "*** you link to this library.  But I can only do this if you have a"
+		      echo "*** shared version of the library, which you do not appear to have"
+		      echo "*** because a test_compile did reveal that the linker did not use this one"
+		      echo "*** as a dynamic dependency that programs can get resolved with at runtime."
 		    fi
 		  fi
 		else
 		  droppeddeps=yes
-		  $ECHO
+		  echo
 		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
-		  $ECHO "*** make it link in!  You will probably need to install it or some"
-		  $ECHO "*** library that it depends on before this library will be fully"
-		  $ECHO "*** functional.  Installing it before continuing would be even better."
+		  echo "*** make it link in!  You will probably need to install it or some"
+		  echo "*** library that it depends on before this library will be fully"
+		  echo "*** functional.  Installing it before continuing would be even better."
 		fi
 		;;
 	      *)
-		newdeplibs="$newdeplibs $i"
+		func_append newdeplibs " $i"
 		;;
 	      esac
 	    done
@@ -6640,15 +7784,27 @@
 	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		case " $predeps $postdeps " in
 		*" $a_deplib "*)
-		  newdeplibs="$newdeplibs $a_deplib"
+		  func_append newdeplibs " $a_deplib"
 		  a_deplib=""
 		  ;;
 		esac
 	      fi
 	      if test -n "$a_deplib" ; then
 		libname=`eval "\\$ECHO \"$libname_spec\""`
+		if test -n "$file_magic_glob"; then
+		  libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
+		else
+		  libnameglob=$libname
+		fi
+		test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
 		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		  if test "$want_nocaseglob" = yes; then
+		    shopt -s nocaseglob
+		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+		    $nocaseglob
+		  else
+		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+		  fi
 		  for potent_lib in $potential_libs; do
 		      # Follow soft links.
 		      if ls -lLd "$potent_lib" 2>/dev/null |
@@ -6665,13 +7821,13 @@
 			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
 			case $potliblink in
 			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-			*) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+			*) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
 			esac
 		      done
 		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
 			 $SED -e 10q |
 			 $EGREP "$file_magic_regex" > /dev/null; then
-			newdeplibs="$newdeplibs $a_deplib"
+			func_append newdeplibs " $a_deplib"
 			a_deplib=""
 			break 2
 		      fi
@@ -6680,12 +7836,12 @@
 	      fi
 	      if test -n "$a_deplib" ; then
 		droppeddeps=yes
-		$ECHO
+		echo
 		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
-		$ECHO "*** I have the capability to make that library automatically link in when"
-		$ECHO "*** you link to this library.  But I can only do this if you have a"
-		$ECHO "*** shared version of the library, which you do not appear to have"
-		$ECHO "*** because I did check the linker path looking for a file starting"
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
 		if test -z "$potlib" ; then
 		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
 		else
@@ -6696,7 +7852,7 @@
 	      ;;
 	    *)
 	      # Add a -L argument.
-	      newdeplibs="$newdeplibs $a_deplib"
+	      func_append newdeplibs " $a_deplib"
 	      ;;
 	    esac
 	  done # Gone through all deplibs.
@@ -6712,7 +7868,7 @@
 	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		case " $predeps $postdeps " in
 		*" $a_deplib "*)
-		  newdeplibs="$newdeplibs $a_deplib"
+		  func_append newdeplibs " $a_deplib"
 		  a_deplib=""
 		  ;;
 		esac
@@ -6723,9 +7879,9 @@
 		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
 		  for potent_lib in $potential_libs; do
 		    potlib="$potent_lib" # see symlink-check above in file_magic test
-		    if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
+		    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
 		       $EGREP "$match_pattern_regex" > /dev/null; then
-		      newdeplibs="$newdeplibs $a_deplib"
+		      func_append newdeplibs " $a_deplib"
 		      a_deplib=""
 		      break 2
 		    fi
@@ -6734,12 +7890,12 @@
 	      fi
 	      if test -n "$a_deplib" ; then
 		droppeddeps=yes
-		$ECHO
+		echo
 		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
-		$ECHO "*** I have the capability to make that library automatically link in when"
-		$ECHO "*** you link to this library.  But I can only do this if you have a"
-		$ECHO "*** shared version of the library, which you do not appear to have"
-		$ECHO "*** because I did check the linker path looking for a file starting"
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
 		if test -z "$potlib" ; then
 		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
 		else
@@ -6750,32 +7906,32 @@
 	      ;;
 	    *)
 	      # Add a -L argument.
-	      newdeplibs="$newdeplibs $a_deplib"
+	      func_append newdeplibs " $a_deplib"
 	      ;;
 	    esac
 	  done # Gone through all deplibs.
 	  ;;
 	none | unknown | *)
 	  newdeplibs=""
-	  tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
-	      -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
+	  tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
 	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 	    for i in $predeps $postdeps ; do
 	      # can't use Xsed below, because $i might contain '/'
-	      tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
+	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
 	    done
 	  fi
-	  if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[	 ]//g' |
-	     $GREP . >/dev/null; then
-	    $ECHO
+	  case $tmp_deplibs in
+	  *[!\	\ ]*)
+	    echo
 	    if test "X$deplibs_check_method" = "Xnone"; then
-	      $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
+	      echo "*** Warning: inter-library dependencies are not supported in this platform."
 	    else
-	      $ECHO "*** Warning: inter-library dependencies are not known to be supported."
+	      echo "*** Warning: inter-library dependencies are not known to be supported."
 	    fi
-	    $ECHO "*** All declared inter-library dependencies are being dropped."
+	    echo "*** All declared inter-library dependencies are being dropped."
 	    droppeddeps=yes
-	  fi
+	    ;;
+	  esac
 	  ;;
 	esac
 	versuffix=$versuffix_save
@@ -6787,23 +7943,23 @@
 	case $host in
 	*-*-rhapsody* | *-*-darwin1.[012])
 	  # On Rhapsody replace the C library with the System framework
-	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
 	  ;;
 	esac
 
 	if test "$droppeddeps" = yes; then
 	  if test "$module" = yes; then
-	    $ECHO
-	    $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
+	    echo
+	    echo "*** Warning: libtool could not satisfy all declared inter-library"
 	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
-	    $ECHO "*** a static module, that should work as long as the dlopening"
-	    $ECHO "*** application is linked with the -dlopen flag."
+	    echo "*** a static module, that should work as long as the dlopening"
+	    echo "*** application is linked with the -dlopen flag."
 	    if test -z "$global_symbol_pipe"; then
-	      $ECHO
-	      $ECHO "*** However, this would only work if libtool was able to extract symbol"
-	      $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
-	      $ECHO "*** not find such a program.  So, this module is probably useless."
-	      $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
+	      echo
+	      echo "*** However, this would only work if libtool was able to extract symbol"
+	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      echo "*** not find such a program.  So, this module is probably useless."
+	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
 	    fi
 	    if test "$build_old_libs" = no; then
 	      oldlibs="$output_objdir/$libname.$libext"
@@ -6813,16 +7969,16 @@
 	      build_libtool_libs=no
 	    fi
 	  else
-	    $ECHO "*** The inter-library dependencies that have been dropped here will be"
-	    $ECHO "*** automatically added whenever a program is linked with this library"
-	    $ECHO "*** or is declared to -dlopen it."
+	    echo "*** The inter-library dependencies that have been dropped here will be"
+	    echo "*** automatically added whenever a program is linked with this library"
+	    echo "*** or is declared to -dlopen it."
 
 	    if test "$allow_undefined" = no; then
-	      $ECHO
-	      $ECHO "*** Since this library must not contain undefined symbols,"
-	      $ECHO "*** because either the platform does not support them or"
-	      $ECHO "*** it was explicitly requested with -no-undefined,"
-	      $ECHO "*** libtool will only create a static version of it."
+	      echo
+	      echo "*** Since this library must not contain undefined symbols,"
+	      echo "*** because either the platform does not support them or"
+	      echo "*** it was explicitly requested with -no-undefined,"
+	      echo "*** libtool will only create a static version of it."
 	      if test "$build_old_libs" = no; then
 		oldlibs="$output_objdir/$libname.$libext"
 		build_libtool_libs=module
@@ -6839,9 +7995,9 @@
       # Time to change all our "foo.ltframework" stuff back to "-framework foo"
       case $host in
 	*-*-darwin*)
-	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-	  new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-	  deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
 	  ;;
       esac
 
@@ -6854,7 +8010,7 @@
 	*)
 	  case " $deplibs " in
 	  *" -L$path/$objdir "*)
-	    new_libs="$new_libs -L$path/$objdir" ;;
+	    func_append new_libs " -L$path/$objdir" ;;
 	  esac
 	  ;;
 	esac
@@ -6864,10 +8020,10 @@
 	-L*)
 	  case " $new_libs " in
 	  *" $deplib "*) ;;
-	  *) new_libs="$new_libs $deplib" ;;
+	  *) func_append new_libs " $deplib" ;;
 	  esac
 	  ;;
-	*) new_libs="$new_libs $deplib" ;;
+	*) func_append new_libs " $deplib" ;;
 	esac
       done
       deplibs="$new_libs"
@@ -6879,15 +8035,22 @@
 
       # Test again, we may have decided not to build it any more
       if test "$build_libtool_libs" = yes; then
+	# Remove ${wl} instances when linking with ld.
+	# FIXME: should test the right _cmds variable.
+	case $archive_cmds in
+	  *\$LD\ *) wl= ;;
+        esac
 	if test "$hardcode_into_libs" = yes; then
 	  # Hardcode the library paths
 	  hardcode_libdirs=
 	  dep_rpath=
 	  rpath="$finalize_rpath"
-	  test "$mode" != relink && rpath="$compile_rpath$rpath"
+	  test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
 	  for libdir in $rpath; do
 	    if test -n "$hardcode_libdir_flag_spec"; then
 	      if test -n "$hardcode_libdir_separator"; then
+		func_replace_sysroot "$libdir"
+		libdir=$func_replace_sysroot_result
 		if test -z "$hardcode_libdirs"; then
 		  hardcode_libdirs="$libdir"
 		else
@@ -6896,18 +8059,18 @@
 		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
 		    ;;
 		  *)
-		    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		    func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
 		    ;;
 		  esac
 		fi
 	      else
 		eval flag=\"$hardcode_libdir_flag_spec\"
-		dep_rpath="$dep_rpath $flag"
+		func_append dep_rpath " $flag"
 	      fi
 	    elif test -n "$runpath_var"; then
 	      case "$perm_rpath " in
 	      *" $libdir "*) ;;
-	      *) perm_rpath="$perm_rpath $libdir" ;;
+	      *) func_append perm_rpath " $libdir" ;;
 	      esac
 	    fi
 	  done
@@ -6915,17 +8078,13 @@
 	  if test -n "$hardcode_libdir_separator" &&
 	     test -n "$hardcode_libdirs"; then
 	    libdir="$hardcode_libdirs"
-	    if test -n "$hardcode_libdir_flag_spec_ld"; then
-	      eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
-	    else
-	      eval dep_rpath=\"$hardcode_libdir_flag_spec\"
-	    fi
+	    eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
 	  fi
 	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
 	    # We should set the runpath_var.
 	    rpath=
 	    for dir in $perm_rpath; do
-	      rpath="$rpath$dir:"
+	      func_append rpath "$dir:"
 	    done
 	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
 	  fi
@@ -6933,7 +8092,7 @@
 	fi
 
 	shlibpath="$finalize_shlibpath"
-	test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+	test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
 	if test -n "$shlibpath"; then
 	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
 	fi
@@ -6959,18 +8118,18 @@
 	linknames=
 	for link
 	do
-	  linknames="$linknames $link"
+	  func_append linknames " $link"
 	done
 
 	# Use standard objects if they are pic
-	test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
 	test "X$libobjs" = "X " && libobjs=
 
 	delfiles=
 	if test -n "$export_symbols" && test -n "$include_expsyms"; then
 	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
 	  export_symbols="$output_objdir/$libname.uexp"
-	  delfiles="$delfiles $export_symbols"
+	  func_append delfiles " $export_symbols"
 	fi
 
 	orig_export_symbols=
@@ -7001,14 +8160,46 @@
 	    $opt_dry_run || $RM $export_symbols
 	    cmds=$export_symbols_cmds
 	    save_ifs="$IFS"; IFS='~'
-	    for cmd in $cmds; do
+	    for cmd1 in $cmds; do
 	      IFS="$save_ifs"
-	      eval cmd=\"$cmd\"
-	      func_len " $cmd"
-	      len=$func_len_result
-	      if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	      # Take the normal branch if the nm_file_list_spec branch
+	      # doesn't work or if tool conversion is not needed.
+	      case $nm_file_list_spec~$to_tool_file_cmd in
+		*~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
+		  try_normal_branch=yes
+		  eval cmd=\"$cmd1\"
+		  func_len " $cmd"
+		  len=$func_len_result
+		  ;;
+		*)
+		  try_normal_branch=no
+		  ;;
+	      esac
+	      if test "$try_normal_branch" = yes \
+		 && { test "$len" -lt "$max_cmd_len" \
+		      || test "$max_cmd_len" -le -1; }
+	      then
 		func_show_eval "$cmd" 'exit $?'
 		skipped_export=false
+	      elif test -n "$nm_file_list_spec"; then
+		func_basename "$output"
+		output_la=$func_basename_result
+		save_libobjs=$libobjs
+		save_output=$output
+		output=${output_objdir}/${output_la}.nm
+		func_to_tool_file "$output"
+		libobjs=$nm_file_list_spec$func_to_tool_file_result
+		func_append delfiles " $output"
+		func_verbose "creating $NM input file list: $output"
+		for obj in $save_libobjs; do
+		  func_to_tool_file "$obj"
+		  $ECHO "$func_to_tool_file_result"
+		done > "$output"
+		eval cmd=\"$cmd1\"
+		func_show_eval "$cmd" 'exit $?'
+		output=$save_output
+		libobjs=$save_libobjs
+		skipped_export=false
 	      else
 		# The command line is too long to execute in one step.
 		func_verbose "using reloadable object file for export list..."
@@ -7029,7 +8220,7 @@
 	if test -n "$export_symbols" && test -n "$include_expsyms"; then
 	  tmp_export_symbols="$export_symbols"
 	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
-	  $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+	  $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
 	fi
 
 	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
@@ -7041,7 +8232,7 @@
 	  # global variables. join(1) would be nice here, but unfortunately
 	  # isn't a blessed tool.
 	  $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
-	  delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
+	  func_append delfiles " $export_symbols $output_objdir/$libname.filter"
 	  export_symbols=$output_objdir/$libname.def
 	  $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
 	fi
@@ -7051,7 +8242,7 @@
 	  case " $convenience " in
 	  *" $test_deplib "*) ;;
 	  *)
-	    tmp_deplibs="$tmp_deplibs $test_deplib"
+	    func_append tmp_deplibs " $test_deplib"
 	    ;;
 	  esac
 	done
@@ -7071,21 +8262,21 @@
 	    test "X$libobjs" = "X " && libobjs=
 	  else
 	    gentop="$output_objdir/${outputname}x"
-	    generated="$generated $gentop"
+	    func_append generated " $gentop"
 
 	    func_extract_archives $gentop $convenience
-	    libobjs="$libobjs $func_extract_archives_result"
+	    func_append libobjs " $func_extract_archives_result"
 	    test "X$libobjs" = "X " && libobjs=
 	  fi
 	fi
 
 	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
 	  eval flag=\"$thread_safe_flag_spec\"
-	  linker_flags="$linker_flags $flag"
+	  func_append linker_flags " $flag"
 	fi
 
 	# Make a backup of the uninstalled library when relinking
-	if test "$mode" = relink; then
+	if test "$opt_mode" = relink; then
 	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
 	fi
 
@@ -7130,7 +8321,8 @@
 	    save_libobjs=$libobjs
 	  fi
 	  save_output=$output
-	  output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
+	  func_basename "$output"
+	  output_la=$func_basename_result
 
 	  # Clear the reloadable object creation command queue and
 	  # initialize k to one.
@@ -7143,13 +8335,16 @@
 	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
 	    output=${output_objdir}/${output_la}.lnkscript
 	    func_verbose "creating GNU ld script: $output"
-	    $ECHO 'INPUT (' > $output
+	    echo 'INPUT (' > $output
 	    for obj in $save_libobjs
 	    do
-	      $ECHO "$obj" >> $output
+	      func_to_tool_file "$obj"
+	      $ECHO "$func_to_tool_file_result" >> $output
 	    done
-	    $ECHO ')' >> $output
-	    delfiles="$delfiles $output"
+	    echo ')' >> $output
+	    func_append delfiles " $output"
+	    func_to_tool_file "$output"
+	    output=$func_to_tool_file_result
 	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
 	    output=${output_objdir}/${output_la}.lnk
 	    func_verbose "creating linker input file list: $output"
@@ -7163,10 +8358,12 @@
 	    fi
 	    for obj
 	    do
-	      $ECHO "$obj" >> $output
+	      func_to_tool_file "$obj"
+	      $ECHO "$func_to_tool_file_result" >> $output
 	    done
-	    delfiles="$delfiles $output"
-	    output=$firstobj\"$file_list_spec$output\"
+	    func_append delfiles " $output"
+	    func_to_tool_file "$output"
+	    output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
 	  else
 	    if test -n "$save_libobjs"; then
 	      func_verbose "creating reloadable object files..."
@@ -7190,17 +8387,19 @@
 		  # command to the queue.
 		  if test "$k" -eq 1 ; then
 		    # The first file doesn't have a previous command to add.
-		    eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+		    reload_objs=$objlist
+		    eval concat_cmds=\"$reload_cmds\"
 		  else
 		    # All subsequent reloadable object files will link in
 		    # the last one created.
-		    eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
+		    reload_objs="$objlist $last_robj"
+		    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
 		  fi
 		  last_robj=$output_objdir/$output_la-${k}.$objext
 		  func_arith $k + 1
 		  k=$func_arith_result
 		  output=$output_objdir/$output_la-${k}.$objext
-		  objlist=$obj
+		  objlist=" $obj"
 		  func_len " $last_robj"
 		  func_arith $len0 + $func_len_result
 		  len=$func_arith_result
@@ -7210,11 +8409,12 @@
 	      # reloadable object file.  All subsequent reloadable object
 	      # files will link in the last one created.
 	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	      eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+	      reload_objs="$objlist $last_robj"
+	      eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
 	      if test -n "$last_robj"; then
 	        eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
 	      fi
-	      delfiles="$delfiles $output"
+	      func_append delfiles " $output"
 
 	    else
 	      output=
@@ -7248,7 +8448,7 @@
 		lt_exit=$?
 
 		# Restore the uninstalled library and exit
-		if test "$mode" = relink; then
+		if test "$opt_mode" = relink; then
 		  ( cd "$output_objdir" && \
 		    $RM "${realname}T" && \
 		    $MV "${realname}U" "$realname" )
@@ -7269,7 +8469,7 @@
 	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
 	      tmp_export_symbols="$export_symbols"
 	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
-	      $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+	      $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
 	    fi
 
 	    if test -n "$orig_export_symbols"; then
@@ -7281,7 +8481,7 @@
 	      # global variables. join(1) would be nice here, but unfortunately
 	      # isn't a blessed tool.
 	      $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
-	      delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
+	      func_append delfiles " $export_symbols $output_objdir/$libname.filter"
 	      export_symbols=$output_objdir/$libname.def
 	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
 	    fi
@@ -7322,10 +8522,10 @@
 	# Add any objects from preloaded convenience libraries
 	if test -n "$dlprefiles"; then
 	  gentop="$output_objdir/${outputname}x"
-	  generated="$generated $gentop"
+	  func_append generated " $gentop"
 
 	  func_extract_archives $gentop $dlprefiles
-	  libobjs="$libobjs $func_extract_archives_result"
+	  func_append libobjs " $func_extract_archives_result"
 	  test "X$libobjs" = "X " && libobjs=
 	fi
 
@@ -7341,7 +8541,7 @@
 	    lt_exit=$?
 
 	    # Restore the uninstalled library and exit
-	    if test "$mode" = relink; then
+	    if test "$opt_mode" = relink; then
 	      ( cd "$output_objdir" && \
 	        $RM "${realname}T" && \
 		$MV "${realname}U" "$realname" )
@@ -7353,7 +8553,7 @@
 	IFS="$save_ifs"
 
 	# Restore the uninstalled library and exit
-	if test "$mode" = relink; then
+	if test "$opt_mode" = relink; then
 	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
 
 	  if test -n "$convenience"; then
@@ -7434,18 +8634,21 @@
       if test -n "$convenience"; then
 	if test -n "$whole_archive_flag_spec"; then
 	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
-	  reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
+	  reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
 	else
 	  gentop="$output_objdir/${obj}x"
-	  generated="$generated $gentop"
+	  func_append generated " $gentop"
 
 	  func_extract_archives $gentop $convenience
 	  reload_conv_objs="$reload_objs $func_extract_archives_result"
 	fi
       fi
 
+      # If we're not building shared, we need to use non_pic_objs
+      test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+
       # Create the old-style object.
-      reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+      reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
 
       output="$obj"
       func_execute_cmds "$reload_cmds" 'exit $?'
@@ -7505,8 +8708,8 @@
       case $host in
       *-*-rhapsody* | *-*-darwin1.[012])
 	# On Rhapsody replace the C library is the System framework
-	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
-	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
 	;;
       esac
 
@@ -7517,14 +8720,14 @@
 	if test "$tagname" = CXX ; then
 	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
 	    10.[0123])
-	      compile_command="$compile_command ${wl}-bind_at_load"
-	      finalize_command="$finalize_command ${wl}-bind_at_load"
+	      func_append compile_command " ${wl}-bind_at_load"
+	      func_append finalize_command " ${wl}-bind_at_load"
 	    ;;
 	  esac
 	fi
 	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
-	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
 	;;
       esac
 
@@ -7538,7 +8741,7 @@
 	*)
 	  case " $compile_deplibs " in
 	  *" -L$path/$objdir "*)
-	    new_libs="$new_libs -L$path/$objdir" ;;
+	    func_append new_libs " -L$path/$objdir" ;;
 	  esac
 	  ;;
 	esac
@@ -7548,17 +8751,17 @@
 	-L*)
 	  case " $new_libs " in
 	  *" $deplib "*) ;;
-	  *) new_libs="$new_libs $deplib" ;;
+	  *) func_append new_libs " $deplib" ;;
 	  esac
 	  ;;
-	*) new_libs="$new_libs $deplib" ;;
+	*) func_append new_libs " $deplib" ;;
 	esac
       done
       compile_deplibs="$new_libs"
 
 
-      compile_command="$compile_command $compile_deplibs"
-      finalize_command="$finalize_command $finalize_deplibs"
+      func_append compile_command " $compile_deplibs"
+      func_append finalize_command " $finalize_deplibs"
 
       if test -n "$rpath$xrpath"; then
 	# If the user specified any rpath flags, then add them.
@@ -7566,7 +8769,7 @@
 	  # This is the magic to use -rpath.
 	  case "$finalize_rpath " in
 	  *" $libdir "*) ;;
-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+	  *) func_append finalize_rpath " $libdir" ;;
 	  esac
 	done
       fi
@@ -7585,18 +8788,18 @@
 	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
 		;;
 	      *)
-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
 		;;
 	      esac
 	    fi
 	  else
 	    eval flag=\"$hardcode_libdir_flag_spec\"
-	    rpath="$rpath $flag"
+	    func_append rpath " $flag"
 	  fi
 	elif test -n "$runpath_var"; then
 	  case "$perm_rpath " in
 	  *" $libdir "*) ;;
-	  *) perm_rpath="$perm_rpath $libdir" ;;
+	  *) func_append perm_rpath " $libdir" ;;
 	  esac
 	fi
 	case $host in
@@ -7605,12 +8808,12 @@
 	  case :$dllsearchpath: in
 	  *":$libdir:"*) ;;
 	  ::) dllsearchpath=$libdir;;
-	  *) dllsearchpath="$dllsearchpath:$libdir";;
+	  *) func_append dllsearchpath ":$libdir";;
 	  esac
 	  case :$dllsearchpath: in
 	  *":$testbindir:"*) ;;
 	  ::) dllsearchpath=$testbindir;;
-	  *) dllsearchpath="$dllsearchpath:$testbindir";;
+	  *) func_append dllsearchpath ":$testbindir";;
 	  esac
 	  ;;
 	esac
@@ -7636,18 +8839,18 @@
 	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
 		;;
 	      *)
-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
 		;;
 	      esac
 	    fi
 	  else
 	    eval flag=\"$hardcode_libdir_flag_spec\"
-	    rpath="$rpath $flag"
+	    func_append rpath " $flag"
 	  fi
 	elif test -n "$runpath_var"; then
 	  case "$finalize_perm_rpath " in
 	  *" $libdir "*) ;;
-	  *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
+	  *) func_append finalize_perm_rpath " $libdir" ;;
 	  esac
 	fi
       done
@@ -7661,8 +8864,8 @@
 
       if test -n "$libobjs" && test "$build_old_libs" = yes; then
 	# Transform all the library objects into standard objects.
-	compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
       fi
 
       func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
@@ -7674,15 +8877,15 @@
 
       wrappers_required=yes
       case $host in
+      *cegcc* | *mingw32ce*)
+        # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
+        wrappers_required=no
+        ;;
       *cygwin* | *mingw* )
         if test "$build_libtool_libs" != yes; then
           wrappers_required=no
         fi
         ;;
-      *cegcc)
-        # Disable wrappers for cegcc, we are cross compiling anyway.
-        wrappers_required=no
-        ;;
       *)
         if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
           wrappers_required=no
@@ -7691,13 +8894,19 @@
       esac
       if test "$wrappers_required" = no; then
 	# Replace the output file specification.
-	compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
 	link_command="$compile_command$compile_rpath"
 
 	# We have no uninstalled library dependencies, so finalize right now.
 	exit_status=0
 	func_show_eval "$link_command" 'exit_status=$?'
 
+	if test -n "$postlink_cmds"; then
+	  func_to_tool_file "$output"
+	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	  func_execute_cmds "$postlink_cmds" 'exit $?'
+	fi
+
 	# Delete the generated files.
 	if test -f "$output_objdir/${outputname}S.${objext}"; then
 	  func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
@@ -7720,7 +8929,7 @@
 	  # We should set the runpath_var.
 	  rpath=
 	  for dir in $perm_rpath; do
-	    rpath="$rpath$dir:"
+	    func_append rpath "$dir:"
 	  done
 	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
 	fi
@@ -7728,7 +8937,7 @@
 	  # We should set the runpath_var.
 	  rpath=
 	  for dir in $finalize_perm_rpath; do
-	    rpath="$rpath$dir:"
+	    func_append rpath "$dir:"
 	  done
 	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
 	fi
@@ -7738,11 +8947,18 @@
 	# We don't need to create a wrapper script.
 	link_command="$compile_var$compile_command$compile_rpath"
 	# Replace the output file specification.
-	link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
 	# Delete the old output file.
 	$opt_dry_run || $RM $output
 	# Link the executable and exit
 	func_show_eval "$link_command" 'exit $?'
+
+	if test -n "$postlink_cmds"; then
+	  func_to_tool_file "$output"
+	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	  func_execute_cmds "$postlink_cmds" 'exit $?'
+	fi
+
 	exit $EXIT_SUCCESS
       fi
 
@@ -7757,7 +8973,7 @@
 	if test "$fast_install" != no; then
 	  link_command="$finalize_var$compile_command$finalize_rpath"
 	  if test "$fast_install" = yes; then
-	    relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+	    relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
 	  else
 	    # fast_install is set to needless
 	    relink_command=
@@ -7769,13 +8985,19 @@
       fi
 
       # Replace the output file specification.
-      link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+      link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
 
       # Delete the old output files.
       $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
 
       func_show_eval "$link_command" 'exit $?'
 
+      if test -n "$postlink_cmds"; then
+	func_to_tool_file "$output_objdir/$outputname"
+	postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	func_execute_cmds "$postlink_cmds" 'exit $?'
+      fi
+
       # Now create the wrapper script.
       func_verbose "creating $output"
 
@@ -7793,18 +9015,7 @@
 	  fi
 	done
 	relink_command="(cd `pwd`; $relink_command)"
-	relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
-      fi
-
-      # Quote $ECHO for shipping.
-      if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
-	case $progpath in
-	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
-	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
-	esac
-	qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
-      else
-	qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
+	relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
       fi
 
       # Only actually do things if not in dry run mode.
@@ -7884,7 +9095,7 @@
 	else
 	  oldobjs="$old_deplibs $non_pic_objects"
 	  if test "$preload" = yes && test -f "$symfileobj"; then
-	    oldobjs="$oldobjs $symfileobj"
+	    func_append oldobjs " $symfileobj"
 	  fi
 	fi
 	addlibs="$old_convenience"
@@ -7892,10 +9103,10 @@
 
       if test -n "$addlibs"; then
 	gentop="$output_objdir/${outputname}x"
-	generated="$generated $gentop"
+	func_append generated " $gentop"
 
 	func_extract_archives $gentop $addlibs
-	oldobjs="$oldobjs $func_extract_archives_result"
+	func_append oldobjs " $func_extract_archives_result"
       fi
 
       # Do each command in the archive commands.
@@ -7906,10 +9117,10 @@
 	# Add any objects from preloaded convenience libraries
 	if test -n "$dlprefiles"; then
 	  gentop="$output_objdir/${outputname}x"
-	  generated="$generated $gentop"
+	  func_append generated " $gentop"
 
 	  func_extract_archives $gentop $dlprefiles
-	  oldobjs="$oldobjs $func_extract_archives_result"
+	  func_append oldobjs " $func_extract_archives_result"
 	fi
 
 	# POSIX demands no paths to be encoded in archives.  We have
@@ -7925,9 +9136,9 @@
 	    done | sort | sort -uc >/dev/null 2>&1); then
 	  :
 	else
-	  $ECHO "copying selected object files to avoid basename conflicts..."
+	  echo "copying selected object files to avoid basename conflicts..."
 	  gentop="$output_objdir/${outputname}x"
-	  generated="$generated $gentop"
+	  func_append generated " $gentop"
 	  func_mkdir_p "$gentop"
 	  save_oldobjs=$oldobjs
 	  oldobjs=
@@ -7951,18 +9162,30 @@
 		esac
 	      done
 	      func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
-	      oldobjs="$oldobjs $gentop/$newobj"
+	      func_append oldobjs " $gentop/$newobj"
 	      ;;
-	    *) oldobjs="$oldobjs $obj" ;;
+	    *) func_append oldobjs " $obj" ;;
 	    esac
 	  done
 	fi
+	func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+	tool_oldlib=$func_to_tool_file_result
 	eval cmds=\"$old_archive_cmds\"
 
 	func_len " $cmds"
 	len=$func_len_result
 	if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
 	  cmds=$old_archive_cmds
+	elif test -n "$archiver_list_spec"; then
+	  func_verbose "using command file archive linking..."
+	  for obj in $oldobjs
+	  do
+	    func_to_tool_file "$obj"
+	    $ECHO "$func_to_tool_file_result"
+	  done > $output_objdir/$libname.libcmd
+	  func_to_tool_file "$output_objdir/$libname.libcmd"
+	  oldobjs=" $archiver_list_spec$func_to_tool_file_result"
+	  cmds=$old_archive_cmds
 	else
 	  # the command line is too long to link in one step, link in parts
 	  func_verbose "using piecewise archive linking..."
@@ -8036,7 +9259,7 @@
       done
       # Quote the link command for shipping.
       relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
-      relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+      relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
       if test "$hardcode_automatic" = yes ; then
 	relink_command=
       fi
@@ -8056,12 +9279,23 @@
 	      *.la)
 		func_basename "$deplib"
 		name="$func_basename_result"
-		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		func_resolve_sysroot "$deplib"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
 		test -z "$libdir" && \
 		  func_fatal_error "\`$deplib' is not a valid libtool archive"
-		newdependency_libs="$newdependency_libs $libdir/$name"
+		func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
 		;;
-	      *) newdependency_libs="$newdependency_libs $deplib" ;;
+	      -L*)
+		func_stripname -L '' "$deplib"
+		func_replace_sysroot "$func_stripname_result"
+		func_append newdependency_libs " -L$func_replace_sysroot_result"
+		;;
+	      -R*)
+		func_stripname -R '' "$deplib"
+		func_replace_sysroot "$func_stripname_result"
+		func_append newdependency_libs " -R$func_replace_sysroot_result"
+		;;
+	      *) func_append newdependency_libs " $deplib" ;;
 	      esac
 	    done
 	    dependency_libs="$newdependency_libs"
@@ -8075,9 +9309,9 @@
 		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
 		test -z "$libdir" && \
 		  func_fatal_error "\`$lib' is not a valid libtool archive"
-		newdlfiles="$newdlfiles $libdir/$name"
+		func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
 		;;
-	      *) newdlfiles="$newdlfiles $lib" ;;
+	      *) func_append newdlfiles " $lib" ;;
 	      esac
 	    done
 	    dlfiles="$newdlfiles"
@@ -8094,7 +9328,7 @@
 		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
 		test -z "$libdir" && \
 		  func_fatal_error "\`$lib' is not a valid libtool archive"
-		newdlprefiles="$newdlprefiles $libdir/$name"
+		func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
 		;;
 	      esac
 	    done
@@ -8106,7 +9340,7 @@
 		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
 		*) abs=`pwd`"/$lib" ;;
 	      esac
-	      newdlfiles="$newdlfiles $abs"
+	      func_append newdlfiles " $abs"
 	    done
 	    dlfiles="$newdlfiles"
 	    newdlprefiles=
@@ -8115,15 +9349,33 @@
 		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
 		*) abs=`pwd`"/$lib" ;;
 	      esac
-	      newdlprefiles="$newdlprefiles $abs"
+	      func_append newdlprefiles " $abs"
 	    done
 	    dlprefiles="$newdlprefiles"
 	  fi
 	  $RM $output
 	  # place dlname in correct position for cygwin
+	  # In fact, it would be nice if we could use this code for all target
+	  # systems that can't hard-code library paths into their executables
+	  # and that have no shared library path variable independent of PATH,
+	  # but it turns out we can't easily determine that from inspecting
+	  # libtool variables, so we have to hard-code the OSs to which it
+	  # applies here; at the moment, that means platforms that use the PE
+	  # object format with DLL files.  See the long comment at the top of
+	  # tests/bindir.at for full details.
 	  tdlname=$dlname
 	  case $host,$output,$installed,$module,$dlname in
-	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
+	      # If a -bindir argument was supplied, place the dll there.
+	      if test "x$bindir" != x ;
+	      then
+		func_relative_path "$install_libdir" "$bindir"
+		tdlname=$func_relative_path_result$dlname
+	      else
+		# Otherwise fall back on heuristic.
+		tdlname=../bin/$dlname
+	      fi
+	      ;;
 	  esac
 	  $ECHO > $output "\
 # $outputname - a libtool library file
@@ -8182,7 +9434,7 @@
     exit $EXIT_SUCCESS
 }
 
-{ test "$mode" = link || test "$mode" = relink; } &&
+{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
     func_mode_link ${1+"$@"}
 
 
@@ -8202,9 +9454,9 @@
     for arg
     do
       case $arg in
-      -f) RM="$RM $arg"; rmforce=yes ;;
-      -*) RM="$RM $arg" ;;
-      *) files="$files $arg" ;;
+      -f) func_append RM " $arg"; rmforce=yes ;;
+      -*) func_append RM " $arg" ;;
+      *) func_append files " $arg" ;;
       esac
     done
 
@@ -8213,24 +9465,23 @@
 
     rmdirs=
 
-    origobjdir="$objdir"
     for file in $files; do
       func_dirname "$file" "" "."
       dir="$func_dirname_result"
       if test "X$dir" = X.; then
-	objdir="$origobjdir"
+	odir="$objdir"
       else
-	objdir="$dir/$origobjdir"
+	odir="$dir/$objdir"
       fi
       func_basename "$file"
       name="$func_basename_result"
-      test "$mode" = uninstall && objdir="$dir"
+      test "$opt_mode" = uninstall && odir="$dir"
 
-      # Remember objdir for removal later, being careful to avoid duplicates
-      if test "$mode" = clean; then
+      # Remember odir for removal later, being careful to avoid duplicates
+      if test "$opt_mode" = clean; then
 	case " $rmdirs " in
-	  *" $objdir "*) ;;
-	  *) rmdirs="$rmdirs $objdir" ;;
+	  *" $odir "*) ;;
+	  *) func_append rmdirs " $odir" ;;
 	esac
       fi
 
@@ -8256,18 +9507,17 @@
 
 	  # Delete the libtool libraries and symlinks.
 	  for n in $library_names; do
-	    rmfiles="$rmfiles $objdir/$n"
+	    func_append rmfiles " $odir/$n"
 	  done
-	  test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
+	  test -n "$old_library" && func_append rmfiles " $odir/$old_library"
 
-	  case "$mode" in
+	  case "$opt_mode" in
 	  clean)
-	    case "  $library_names " in
-	    # "  " in the beginning catches empty $dlname
+	    case " $library_names " in
 	    *" $dlname "*) ;;
-	    *) rmfiles="$rmfiles $objdir/$dlname" ;;
+	    *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
 	    esac
-	    test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+	    test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
 	    ;;
 	  uninstall)
 	    if test -n "$library_names"; then
@@ -8295,19 +9545,19 @@
 	  # Add PIC object to the list of files to remove.
 	  if test -n "$pic_object" &&
 	     test "$pic_object" != none; then
-	    rmfiles="$rmfiles $dir/$pic_object"
+	    func_append rmfiles " $dir/$pic_object"
 	  fi
 
 	  # Add non-PIC object to the list of files to remove.
 	  if test -n "$non_pic_object" &&
 	     test "$non_pic_object" != none; then
-	    rmfiles="$rmfiles $dir/$non_pic_object"
+	    func_append rmfiles " $dir/$non_pic_object"
 	  fi
 	fi
 	;;
 
       *)
-	if test "$mode" = clean ; then
+	if test "$opt_mode" = clean ; then
 	  noexename=$name
 	  case $file in
 	  *.exe)
@@ -8317,7 +9567,7 @@
 	    noexename=$func_stripname_result
 	    # $file with .exe has already been added to rmfiles,
 	    # add $file without .exe
-	    rmfiles="$rmfiles $file"
+	    func_append rmfiles " $file"
 	    ;;
 	  esac
 	  # Do a test to see if this is a libtool program.
@@ -8326,7 +9576,7 @@
 	      func_ltwrapper_scriptname "$file"
 	      relink_command=
 	      func_source $func_ltwrapper_scriptname_result
-	      rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
+	      func_append rmfiles " $func_ltwrapper_scriptname_result"
 	    else
 	      relink_command=
 	      func_source $dir/$noexename
@@ -8334,12 +9584,12 @@
 
 	    # note $name still contains .exe if it was in $file originally
 	    # as does the version of $file that was added into $rmfiles
-	    rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
+	    func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
 	    if test "$fast_install" = yes && test -n "$relink_command"; then
-	      rmfiles="$rmfiles $objdir/lt-$name"
+	      func_append rmfiles " $odir/lt-$name"
 	    fi
 	    if test "X$noexename" != "X$name" ; then
-	      rmfiles="$rmfiles $objdir/lt-${noexename}.c"
+	      func_append rmfiles " $odir/lt-${noexename}.c"
 	    fi
 	  fi
 	fi
@@ -8347,7 +9597,6 @@
       esac
       func_show_eval "$RM $rmfiles" 'exit_status=1'
     done
-    objdir="$origobjdir"
 
     # Try to remove the ${objdir}s in the directories where we deleted files
     for dir in $rmdirs; do
@@ -8359,16 +9608,16 @@
     exit $exit_status
 }
 
-{ test "$mode" = uninstall || test "$mode" = clean; } &&
+{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
     func_mode_uninstall ${1+"$@"}
 
-test -z "$mode" && {
+test -z "$opt_mode" && {
   help="$generic_help"
   func_fatal_help "you must specify a MODE"
 }
 
 test -z "$exec_cmd" && \
-  func_fatal_help "invalid operation mode \`$mode'"
+  func_fatal_help "invalid operation mode \`$opt_mode'"
 
 if test -n "$exec_cmd"; then
   eval exec "$exec_cmd"
diff --git a/Modules/_ctypes/libffi/m4/asmcfi.m4 b/Modules/_ctypes/libffi/m4/asmcfi.m4
new file mode 100644
index 0000000..dbf73a0
--- /dev/null
+++ b/Modules/_ctypes/libffi/m4/asmcfi.m4
@@ -0,0 +1,13 @@
+AC_DEFUN([GCC_AS_CFI_PSEUDO_OP],
+[AC_CACHE_CHECK([assembler .cfi pseudo-op support],
+    gcc_cv_as_cfi_pseudo_op, [
+    gcc_cv_as_cfi_pseudo_op=unknown
+    AC_TRY_COMPILE([asm (".cfi_startproc\n\t.cfi_endproc");],,
+		   [gcc_cv_as_cfi_pseudo_op=yes],
+		   [gcc_cv_as_cfi_pseudo_op=no])
+ ])
+ if test "x$gcc_cv_as_cfi_pseudo_op" = xyes; then
+    AC_DEFINE(HAVE_AS_CFI_PSEUDO_OP, 1,
+	      [Define if your assembler supports .cfi_* directives.])
+ fi
+])
diff --git a/Modules/_ctypes/libffi/m4/ax_append_flag.m4 b/Modules/_ctypes/libffi/m4/ax_append_flag.m4
new file mode 100644
index 0000000..1d38b76
--- /dev/null
+++ b/Modules/_ctypes/libffi/m4/ax_append_flag.m4
@@ -0,0 +1,69 @@
+# ===========================================================================
+#      http://www.gnu.org/software/autoconf-archive/ax_append_flag.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+#   AX_APPEND_FLAG(FLAG, [FLAGS-VARIABLE])
+#
+# DESCRIPTION
+#
+#   FLAG is appended to the FLAGS-VARIABLE shell variable, with a space
+#   added in between.
+#
+#   If FLAGS-VARIABLE is not specified, the current language's flags (e.g.
+#   CFLAGS) is used.  FLAGS-VARIABLE is not changed if it already contains
+#   FLAG.  If FLAGS-VARIABLE is unset in the shell, it is set to exactly
+#   FLAG.
+#
+#   NOTE: Implementation based on AX_CFLAGS_GCC_OPTION.
+#
+# LICENSE
+#
+#   Copyright (c) 2008 Guido U. Draheim <guidod@gmx.de>
+#   Copyright (c) 2011 Maarten Bosmans <mkbosmans@gmail.com>
+#
+#   This program is free software: you can redistribute it and/or modify it
+#   under the terms of the GNU General Public License as published by the
+#   Free Software Foundation, either version 3 of the License, or (at your
+#   option) any later version.
+#
+#   This program is distributed in the hope that it will be useful, but
+#   WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+#   Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License along
+#   with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+#   As a special exception, the respective Autoconf Macro's copyright owner
+#   gives unlimited permission to copy, distribute and modify the configure
+#   scripts that are the output of Autoconf when processing the Macro. You
+#   need not follow the terms of the GNU General Public License when using
+#   or distributing such scripts, even though portions of the text of the
+#   Macro appear in them. The GNU General Public License (GPL) does govern
+#   all other use of the material that constitutes the Autoconf Macro.
+#
+#   This special exception to the GPL applies to versions of the Autoconf
+#   Macro released by the Autoconf Archive. When you make and distribute a
+#   modified version of the Autoconf Macro, you may extend this special
+#   exception to the GPL to apply to your modified version as well.
+
+#serial 2
+
+AC_DEFUN([AX_APPEND_FLAG],
+[AC_PREREQ(2.59)dnl for _AC_LANG_PREFIX
+AS_VAR_PUSHDEF([FLAGS], [m4_default($2,_AC_LANG_PREFIX[FLAGS])])dnl
+AS_VAR_SET_IF(FLAGS,
+  [case " AS_VAR_GET(FLAGS) " in
+    *" $1 "*)
+      AC_RUN_LOG([: FLAGS already contains $1])
+      ;;
+    *)
+      AC_RUN_LOG([: FLAGS="$FLAGS $1"])
+      AS_VAR_SET(FLAGS, ["AS_VAR_GET(FLAGS) $1"])
+      ;;
+   esac],
+  [AS_VAR_SET(FLAGS,["$1"])])
+AS_VAR_POPDEF([FLAGS])dnl
+])dnl AX_APPEND_FLAG
diff --git a/Modules/_ctypes/libffi/m4/ax_cc_maxopt.m4 b/Modules/_ctypes/libffi/m4/ax_cc_maxopt.m4
new file mode 100644
index 0000000..62e3b53
--- /dev/null
+++ b/Modules/_ctypes/libffi/m4/ax_cc_maxopt.m4
@@ -0,0 +1,181 @@
+# ===========================================================================
+#       http://www.gnu.org/software/autoconf-archive/ax_cc_maxopt.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+#   AX_CC_MAXOPT
+#
+# DESCRIPTION
+#
+#   Try to turn on "good" C optimization flags for various compilers and
+#   architectures, for some definition of "good". (In our case, good for
+#   FFTW and hopefully for other scientific codes. Modify as needed.)
+#
+#   The user can override the flags by setting the CFLAGS environment
+#   variable. The user can also specify --enable-portable-binary in order to
+#   disable any optimization flags that might result in a binary that only
+#   runs on the host architecture.
+#
+#   Note also that the flags assume that ANSI C aliasing rules are followed
+#   by the code (e.g. for gcc's -fstrict-aliasing), and that floating-point
+#   computations can be re-ordered as needed.
+#
+#   Requires macros: AX_CHECK_COMPILE_FLAG, AX_COMPILER_VENDOR,
+#   AX_GCC_ARCHFLAG, AX_GCC_X86_CPUID.
+#
+# LICENSE
+#
+#   Copyright (c) 2008 Steven G. Johnson <stevenj@alum.mit.edu>
+#   Copyright (c) 2008 Matteo Frigo
+#
+#   This program is free software: you can redistribute it and/or modify it
+#   under the terms of the GNU General Public License as published by the
+#   Free Software Foundation, either version 3 of the License, or (at your
+#   option) any later version.
+#
+#   This program is distributed in the hope that it will be useful, but
+#   WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+#   Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License along
+#   with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+#   As a special exception, the respective Autoconf Macro's copyright owner
+#   gives unlimited permission to copy, distribute and modify the configure
+#   scripts that are the output of Autoconf when processing the Macro. You
+#   need not follow the terms of the GNU General Public License when using
+#   or distributing such scripts, even though portions of the text of the
+#   Macro appear in them. The GNU General Public License (GPL) does govern
+#   all other use of the material that constitutes the Autoconf Macro.
+#
+#   This special exception to the GPL applies to versions of the Autoconf
+#   Macro released by the Autoconf Archive. When you make and distribute a
+#   modified version of the Autoconf Macro, you may extend this special
+#   exception to the GPL to apply to your modified version as well.
+
+#serial 13
+
+AC_DEFUN([AX_CC_MAXOPT],
+[
+AC_REQUIRE([AC_PROG_CC])
+AC_REQUIRE([AX_COMPILER_VENDOR])
+AC_REQUIRE([AC_CANONICAL_HOST])
+
+AC_ARG_ENABLE(portable-binary, [AS_HELP_STRING([--enable-portable-binary], [disable compiler optimizations that would produce unportable binaries])],
+	acx_maxopt_portable=$enableval, acx_maxopt_portable=no)
+
+# Try to determine "good" native compiler flags if none specified via CFLAGS
+if test "$ac_test_CFLAGS" != "set"; then
+  CFLAGS=""
+  case $ax_cv_c_compiler_vendor in
+    dec) CFLAGS="-newc -w0 -O5 -ansi_alias -ansi_args -fp_reorder -tune host"
+	 if test "x$acx_maxopt_portable" = xno; then
+           CFLAGS="$CFLAGS -arch host"
+         fi;;
+
+    sun) CFLAGS="-native -fast -xO5 -dalign"
+	 if test "x$acx_maxopt_portable" = xyes; then
+	   CFLAGS="$CFLAGS -xarch=generic"
+         fi;;
+
+    hp)  CFLAGS="+Oall +Optrs_ansi +DSnative"
+	 if test "x$acx_maxopt_portable" = xyes; then
+	   CFLAGS="$CFLAGS +DAportable"
+	 fi;;
+
+    ibm) if test "x$acx_maxopt_portable" = xno; then
+           xlc_opt="-qarch=auto -qtune=auto"
+	 else
+           xlc_opt="-qtune=auto"
+	 fi
+         AX_CHECK_COMPILE_FLAG($xlc_opt,
+		CFLAGS="-O3 -qansialias -w $xlc_opt",
+               [CFLAGS="-O3 -qansialias -w"
+                echo "******************************************************"
+                echo "*  You seem to have the IBM  C compiler.  It is      *"
+                echo "*  recommended for best performance that you use:    *"
+                echo "*                                                    *"
+                echo "*    CFLAGS=-O3 -qarch=xxx -qtune=xxx -qansialias -w *"
+                echo "*                      ^^^        ^^^                *"
+                echo "*  where xxx is pwr2, pwr3, 604, or whatever kind of *"
+                echo "*  CPU you have.  (Set the CFLAGS environment var.   *"
+                echo "*  and re-run configure.)  For more info, man cc.    *"
+                echo "******************************************************"])
+         ;;
+
+    intel) CFLAGS="-O3 -ansi_alias"
+	if test "x$acx_maxopt_portable" = xno; then
+	  icc_archflag=unknown
+	  icc_flags=""
+	  case $host_cpu in
+	    i686*|x86_64*)
+              # icc accepts gcc assembly syntax, so these should work:
+	      AX_GCC_X86_CPUID(0)
+              AX_GCC_X86_CPUID(1)
+	      case $ax_cv_gcc_x86_cpuid_0 in # see AX_GCC_ARCHFLAG
+                *:756e6547:*:*) # Intel
+                  case $ax_cv_gcc_x86_cpuid_1 in
+                    *6a?:*[[234]]:*:*|*6[[789b]]?:*:*:*) icc_flags="-xK";;
+                    *f3[[347]]:*:*:*|*f4[1347]:*:*:*) icc_flags="-xP -xN -xW -xK";;
+                    *f??:*:*:*) icc_flags="-xN -xW -xK";;
+                  esac ;;
+              esac ;;
+          esac
+          if test "x$icc_flags" != x; then
+            for flag in $icc_flags; do
+              AX_CHECK_COMPILE_FLAG($flag, [icc_archflag=$flag; break])
+            done
+          fi
+          AC_MSG_CHECKING([for icc architecture flag])
+	  AC_MSG_RESULT($icc_archflag)
+          if test "x$icc_archflag" != xunknown; then
+            CFLAGS="$CFLAGS $icc_archflag"
+          fi
+        fi
+	;;
+
+    gnu)
+     # default optimization flags for gcc on all systems
+     CFLAGS="-O3 -fomit-frame-pointer"
+
+     # -malign-double for x86 systems
+     # LIBFFI -- DON'T DO THIS - CHANGES ABI
+     # AX_CHECK_COMPILE_FLAG(-malign-double, CFLAGS="$CFLAGS -malign-double")
+
+     #  -fstrict-aliasing for gcc-2.95+
+     AX_CHECK_COMPILE_FLAG(-fstrict-aliasing,
+	CFLAGS="$CFLAGS -fstrict-aliasing")
+
+     # note that we enable "unsafe" fp optimization with other compilers, too
+     AX_CHECK_COMPILE_FLAG(-ffast-math, CFLAGS="$CFLAGS -ffast-math")
+
+     AX_GCC_ARCHFLAG($acx_maxopt_portable)
+     ;;
+  esac
+
+  if test -z "$CFLAGS"; then
+	echo ""
+	echo "********************************************************"
+        echo "* WARNING: Don't know the best CFLAGS for this system  *"
+        echo "* Use ./configure CFLAGS=... to specify your own flags *"
+	echo "* (otherwise, a default of CFLAGS=-O3 will be used)    *"
+	echo "********************************************************"
+	echo ""
+        CFLAGS="-O3"
+  fi
+
+  AX_CHECK_COMPILE_FLAG($CFLAGS, [], [
+	echo ""
+        echo "********************************************************"
+        echo "* WARNING: The guessed CFLAGS don't seem to work with  *"
+        echo "* your compiler.                                       *"
+        echo "* Use ./configure CFLAGS=... to specify your own flags *"
+        echo "********************************************************"
+        echo ""
+        CFLAGS=""
+  ])
+
+fi
+])
diff --git a/Modules/_ctypes/libffi/m4/ax_cflags_warn_all.m4 b/Modules/_ctypes/libffi/m4/ax_cflags_warn_all.m4
new file mode 100644
index 0000000..0fa3e18
--- /dev/null
+++ b/Modules/_ctypes/libffi/m4/ax_cflags_warn_all.m4
@@ -0,0 +1,122 @@
+# ===========================================================================
+#    http://www.gnu.org/software/autoconf-archive/ax_cflags_warn_all.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+#   AX_CFLAGS_WARN_ALL   [(shellvar [,default, [A/NA]])]
+#   AX_CXXFLAGS_WARN_ALL [(shellvar [,default, [A/NA]])]
+#   AX_FCFLAGS_WARN_ALL  [(shellvar [,default, [A/NA]])]
+#
+# DESCRIPTION
+#
+#   Try to find a compiler option that enables most reasonable warnings.
+#
+#   For the GNU compiler it will be -Wall (and -ansi -pedantic) The result
+#   is added to the shellvar being CFLAGS, CXXFLAGS, or FCFLAGS by default.
+#
+#   Currently this macro knows about the GCC, Solaris, Digital Unix, AIX,
+#   HP-UX, IRIX, NEC SX-5 (Super-UX 10), Cray J90 (Unicos 10.0.0.8), and
+#   Intel compilers.  For a given compiler, the Fortran flags are much more
+#   experimental than their C equivalents.
+#
+#    - $1 shell-variable-to-add-to : CFLAGS, CXXFLAGS, or FCFLAGS
+#    - $2 add-value-if-not-found : nothing
+#    - $3 action-if-found : add value to shellvariable
+#    - $4 action-if-not-found : nothing
+#
+#   NOTE: These macros depend on AX_APPEND_FLAG.
+#
+# LICENSE
+#
+#   Copyright (c) 2008 Guido U. Draheim <guidod@gmx.de>
+#   Copyright (c) 2010 Rhys Ulerich <rhys.ulerich@gmail.com>
+#
+#   This program is free software; you can redistribute it and/or modify it
+#   under the terms of the GNU General Public License as published by the
+#   Free Software Foundation; either version 3 of the License, or (at your
+#   option) any later version.
+#
+#   This program is distributed in the hope that it will be useful, but
+#   WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+#   Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License along
+#   with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+#   As a special exception, the respective Autoconf Macro's copyright owner
+#   gives unlimited permission to copy, distribute and modify the configure
+#   scripts that are the output of Autoconf when processing the Macro. You
+#   need not follow the terms of the GNU General Public License when using
+#   or distributing such scripts, even though portions of the text of the
+#   Macro appear in them. The GNU General Public License (GPL) does govern
+#   all other use of the material that constitutes the Autoconf Macro.
+#
+#   This special exception to the GPL applies to versions of the Autoconf
+#   Macro released by the Autoconf Archive. When you make and distribute a
+#   modified version of the Autoconf Macro, you may extend this special
+#   exception to the GPL to apply to your modified version as well.
+
+#serial 14
+
+AC_DEFUN([AX_FLAGS_WARN_ALL],[dnl
+AS_VAR_PUSHDEF([FLAGS],[_AC_LANG_PREFIX[]FLAGS])dnl
+AS_VAR_PUSHDEF([VAR],[ac_cv_[]_AC_LANG_ABBREV[]flags_warn_all])dnl
+AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for maximum warnings],
+VAR,[VAR="no, unknown"
+ac_save_[]FLAGS="$[]FLAGS"
+for ac_arg dnl
+in "-warn all  % -warn all"   dnl Intel
+   "-pedantic  % -Wall"       dnl GCC
+   "-xstrconst % -v"          dnl Solaris C
+   "-std1      % -verbose -w0 -warnprotos" dnl Digital Unix
+   "-qlanglvl=ansi % -qsrcmsg -qinfo=all:noppt:noppc:noobs:nocnd" dnl AIX
+   "-ansi -ansiE % -fullwarn" dnl IRIX
+   "+ESlit     % +w1"         dnl HP-UX C
+   "-Xc        % -pvctl[,]fullmsg" dnl NEC SX-5 (Super-UX 10)
+   "-h conform % -h msglevel 2" dnl Cray C (Unicos)
+   #
+do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
+   AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
+                     [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
+done
+FLAGS="$ac_save_[]FLAGS"
+])
+AS_VAR_POPDEF([FLAGS])dnl
+AC_REQUIRE([AX_APPEND_FLAG])
+case ".$VAR" in
+     .ok|.ok,*) m4_ifvaln($3,$3) ;;
+   .|.no|.no,*) m4_default($4,[m4_ifval($2,[AX_APPEND_FLAG([$2], [$1])])]) ;;
+   *) m4_default($3,[AX_APPEND_FLAG([$VAR], [$1])]) ;;
+esac
+AS_VAR_POPDEF([VAR])dnl
+])dnl AX_FLAGS_WARN_ALL
+dnl  implementation tactics:
+dnl   the for-argument contains a list of options. The first part of
+dnl   these does only exist to detect the compiler - usually it is
+dnl   a global option to enable -ansi or -extrawarnings. All other
+dnl   compilers will fail about it. That was needed since a lot of
+dnl   compilers will give false positives for some option-syntax
+dnl   like -Woption or -Xoption as they think of it is a pass-through
+dnl   to later compile stages or something. The "%" is used as a
+dnl   delimiter. A non-option comment can be given after "%%" marks
+dnl   which will be shown but not added to the respective C/CXXFLAGS.
+
+AC_DEFUN([AX_CFLAGS_WARN_ALL],[dnl
+AC_LANG_PUSH([C])
+AX_FLAGS_WARN_ALL([$1], [$2], [$3], [$4])
+AC_LANG_POP([C])
+])
+
+AC_DEFUN([AX_CXXFLAGS_WARN_ALL],[dnl
+AC_LANG_PUSH([C++])
+AX_FLAGS_WARN_ALL([$1], [$2], [$3], [$4])
+AC_LANG_POP([C++])
+])
+
+AC_DEFUN([AX_FCFLAGS_WARN_ALL],[dnl
+AC_LANG_PUSH([Fortran])
+AX_FLAGS_WARN_ALL([$1], [$2], [$3], [$4])
+AC_LANG_POP([Fortran])
+])
diff --git a/Modules/_ctypes/libffi/m4/ax_check_compile_flag.m4 b/Modules/_ctypes/libffi/m4/ax_check_compile_flag.m4
new file mode 100644
index 0000000..c3a8d69
--- /dev/null
+++ b/Modules/_ctypes/libffi/m4/ax_check_compile_flag.m4
@@ -0,0 +1,72 @@
+# ===========================================================================
+#   http://www.gnu.org/software/autoconf-archive/ax_check_compile_flag.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+#   AX_CHECK_COMPILE_FLAG(FLAG, [ACTION-SUCCESS], [ACTION-FAILURE], [EXTRA-FLAGS])
+#
+# DESCRIPTION
+#
+#   Check whether the given FLAG works with the current language's compiler
+#   or gives an error.  (Warnings, however, are ignored)
+#
+#   ACTION-SUCCESS/ACTION-FAILURE are shell commands to execute on
+#   success/failure.
+#
+#   If EXTRA-FLAGS is defined, it is added to the current language's default
+#   flags (e.g. CFLAGS) when the check is done.  The check is thus made with
+#   the flags: "CFLAGS EXTRA-FLAGS FLAG".  This can for example be used to
+#   force the compiler to issue an error when a bad flag is given.
+#
+#   NOTE: Implementation based on AX_CFLAGS_GCC_OPTION. Please keep this
+#   macro in sync with AX_CHECK_{PREPROC,LINK}_FLAG.
+#
+# LICENSE
+#
+#   Copyright (c) 2008 Guido U. Draheim <guidod@gmx.de>
+#   Copyright (c) 2011 Maarten Bosmans <mkbosmans@gmail.com>
+#
+#   This program is free software: you can redistribute it and/or modify it
+#   under the terms of the GNU General Public License as published by the
+#   Free Software Foundation, either version 3 of the License, or (at your
+#   option) any later version.
+#
+#   This program is distributed in the hope that it will be useful, but
+#   WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+#   Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License along
+#   with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+#   As a special exception, the respective Autoconf Macro's copyright owner
+#   gives unlimited permission to copy, distribute and modify the configure
+#   scripts that are the output of Autoconf when processing the Macro. You
+#   need not follow the terms of the GNU General Public License when using
+#   or distributing such scripts, even though portions of the text of the
+#   Macro appear in them. The GNU General Public License (GPL) does govern
+#   all other use of the material that constitutes the Autoconf Macro.
+#
+#   This special exception to the GPL applies to versions of the Autoconf
+#   Macro released by the Autoconf Archive. When you make and distribute a
+#   modified version of the Autoconf Macro, you may extend this special
+#   exception to the GPL to apply to your modified version as well.
+
+#serial 2
+
+AC_DEFUN([AX_CHECK_COMPILE_FLAG],
+[AC_PREREQ(2.59)dnl for _AC_LANG_PREFIX
+AS_VAR_PUSHDEF([CACHEVAR],[ax_cv_check_[]_AC_LANG_ABBREV[]flags_$4_$1])dnl
+AC_CACHE_CHECK([whether _AC_LANG compiler accepts $1], CACHEVAR, [
+  ax_check_save_flags=$[]_AC_LANG_PREFIX[]FLAGS
+  _AC_LANG_PREFIX[]FLAGS="$[]_AC_LANG_PREFIX[]FLAGS $4 $1"
+  AC_COMPILE_IFELSE([AC_LANG_PROGRAM()],
+    [AS_VAR_SET(CACHEVAR,[yes])],
+    [AS_VAR_SET(CACHEVAR,[no])])
+  _AC_LANG_PREFIX[]FLAGS=$ax_check_save_flags])
+AS_IF([test x"AS_VAR_GET(CACHEVAR)" = xyes],
+  [m4_default([$2], :)],
+  [m4_default([$3], :)])
+AS_VAR_POPDEF([CACHEVAR])dnl
+])dnl AX_CHECK_COMPILE_FLAGS
diff --git a/Modules/_ctypes/libffi/m4/ax_compiler_vendor.m4 b/Modules/_ctypes/libffi/m4/ax_compiler_vendor.m4
new file mode 100644
index 0000000..73e32ea
--- /dev/null
+++ b/Modules/_ctypes/libffi/m4/ax_compiler_vendor.m4
@@ -0,0 +1,84 @@
+# ===========================================================================
+#    http://www.gnu.org/software/autoconf-archive/ax_compiler_vendor.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+#   AX_COMPILER_VENDOR
+#
+# DESCRIPTION
+#
+#   Determine the vendor of the C/C++ compiler, e.g., gnu, intel, ibm, sun,
+#   hp, borland, comeau, dec, cray, kai, lcc, metrowerks, sgi, microsoft,
+#   watcom, etc. The vendor is returned in the cache variable
+#   $ax_cv_c_compiler_vendor for C and $ax_cv_cxx_compiler_vendor for C++.
+#
+# LICENSE
+#
+#   Copyright (c) 2008 Steven G. Johnson <stevenj@alum.mit.edu>
+#   Copyright (c) 2008 Matteo Frigo
+#
+#   This program is free software: you can redistribute it and/or modify it
+#   under the terms of the GNU General Public License as published by the
+#   Free Software Foundation, either version 3 of the License, or (at your
+#   option) any later version.
+#
+#   This program is distributed in the hope that it will be useful, but
+#   WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+#   Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License along
+#   with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+#   As a special exception, the respective Autoconf Macro's copyright owner
+#   gives unlimited permission to copy, distribute and modify the configure
+#   scripts that are the output of Autoconf when processing the Macro. You
+#   need not follow the terms of the GNU General Public License when using
+#   or distributing such scripts, even though portions of the text of the
+#   Macro appear in them. The GNU General Public License (GPL) does govern
+#   all other use of the material that constitutes the Autoconf Macro.
+#
+#   This special exception to the GPL applies to versions of the Autoconf
+#   Macro released by the Autoconf Archive. When you make and distribute a
+#   modified version of the Autoconf Macro, you may extend this special
+#   exception to the GPL to apply to your modified version as well.
+
+#serial 11
+
+AC_DEFUN([AX_COMPILER_VENDOR],
+[AC_CACHE_CHECK([for _AC_LANG compiler vendor], ax_cv_[]_AC_LANG_ABBREV[]_compiler_vendor,
+  [# note: don't check for gcc first since some other compilers define __GNUC__
+  vendors="intel:     __ICC,__ECC,__INTEL_COMPILER
+           ibm:       __xlc__,__xlC__,__IBMC__,__IBMCPP__
+           pathscale: __PATHCC__,__PATHSCALE__
+           clang:     __clang__
+           gnu:       __GNUC__
+           sun:       __SUNPRO_C,__SUNPRO_CC
+           hp:        __HP_cc,__HP_aCC
+           dec:       __DECC,__DECCXX,__DECC_VER,__DECCXX_VER
+           borland:   __BORLANDC__,__TURBOC__
+           comeau:    __COMO__
+           cray:      _CRAYC
+           kai:       __KCC
+           lcc:       __LCC__
+           sgi:       __sgi,sgi
+           microsoft: _MSC_VER
+           metrowerks: __MWERKS__
+           watcom:    __WATCOMC__
+           portland:  __PGI
+           unknown:   UNKNOWN"
+  for ventest in $vendors; do
+    case $ventest in
+      *:) vendor=$ventest; continue ;;
+      *)  vencpp="defined("`echo $ventest | sed 's/,/) || defined(/g'`")" ;;
+    esac
+    AC_COMPILE_IFELSE([AC_LANG_PROGRAM(,[
+      #if !($vencpp)
+        thisisanerror;
+      #endif
+    ])], [break])
+  done
+  ax_cv_[]_AC_LANG_ABBREV[]_compiler_vendor=`echo $vendor | cut -d: -f1`
+ ])
+])
diff --git a/Modules/_ctypes/libffi/m4/ax_configure_args.m4 b/Modules/_ctypes/libffi/m4/ax_configure_args.m4
new file mode 100644
index 0000000..0726b1b
--- /dev/null
+++ b/Modules/_ctypes/libffi/m4/ax_configure_args.m4
@@ -0,0 +1,70 @@
+# ===========================================================================
+#     http://www.gnu.org/software/autoconf-archive/ax_configure_args.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+#   AX_CONFIGURE_ARGS
+#
+# DESCRIPTION
+#
+#   Helper macro for AX_ENABLE_BUILDDIR.
+#
+#   The traditional way of starting a subdir-configure is running the script
+#   with ${1+"$@"} but since autoconf 2.60 this is broken. Instead we have
+#   to rely on eval'ing $ac_configure_args however some old autoconf
+#   versions do not provide that. To ensure maximum portability of autoconf
+#   extension macros this helper can be AC_REQUIRE'd so that
+#   $ac_configure_args will alsways be present.
+#
+#   Sadly, the traditional "exec $SHELL" of the enable_builddir macros is
+#   spoiled now and must be replaced by "eval + exit $?".
+#
+#   Example:
+#
+#     AC_DEFUN([AX_ENABLE_SUBDIR],[dnl
+#       AC_REQUIRE([AX_CONFIGURE_ARGS])dnl
+#       eval $SHELL $ac_configure_args || exit $?
+#       ...])
+#
+# LICENSE
+#
+#   Copyright (c) 2008 Guido U. Draheim <guidod@gmx.de>
+#
+#   This program is free software; you can redistribute it and/or modify it
+#   under the terms of the GNU General Public License as published by the
+#   Free Software Foundation; either version 3 of the License, or (at your
+#   option) any later version.
+#
+#   This program is distributed in the hope that it will be useful, but
+#   WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+#   Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License along
+#   with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+#   As a special exception, the respective Autoconf Macro's copyright owner
+#   gives unlimited permission to copy, distribute and modify the configure
+#   scripts that are the output of Autoconf when processing the Macro. You
+#   need not follow the terms of the GNU General Public License when using
+#   or distributing such scripts, even though portions of the text of the
+#   Macro appear in them. The GNU General Public License (GPL) does govern
+#   all other use of the material that constitutes the Autoconf Macro.
+#
+#   This special exception to the GPL applies to versions of the Autoconf
+#   Macro released by the Autoconf Archive. When you make and distribute a
+#   modified version of the Autoconf Macro, you may extend this special
+#   exception to the GPL to apply to your modified version as well.
+
+#serial 9
+
+AC_DEFUN([AX_CONFIGURE_ARGS],[
+   # [$]@ is unsable in 2.60+ but earlier autoconf had no ac_configure_args
+   if test "${ac_configure_args+set}" != "set" ; then
+      ac_configure_args=
+      for ac_arg in ${1+"[$]@"}; do
+         ac_configure_args="$ac_configure_args '$ac_arg'"
+      done
+   fi
+])
diff --git a/Modules/_ctypes/libffi/m4/ax_enable_builddir.m4 b/Modules/_ctypes/libffi/m4/ax_enable_builddir.m4
new file mode 100644
index 0000000..3fb8731
--- /dev/null
+++ b/Modules/_ctypes/libffi/m4/ax_enable_builddir.m4
@@ -0,0 +1,300 @@
+# ===========================================================================
+#    http://www.gnu.org/software/autoconf-archive/ax_enable_builddir.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+#   AX_ENABLE_BUILDDIR [(dirstring-or-command [,Makefile.mk [,-all]])]
+#
+# DESCRIPTION
+#
+#   If the current configure was run within the srcdir then we move all
+#   configure-files into a subdir and let the configure steps continue
+#   there. We provide an option --disable-builddir to suppress the move into
+#   a separate builddir.
+#
+#   Defaults:
+#
+#     $1 = $host (overridden with $HOST)
+#     $2 = Makefile.mk
+#     $3 = -all
+#
+#   This macro must be called before AM_INIT_AUTOMAKE. It creates a default
+#   toplevel srcdir Makefile from the information found in the created
+#   toplevel builddir Makefile. It just copies the variables and
+#   rule-targets, each extended with a default rule-execution that recurses
+#   into the build directory of the current "HOST". You can override the
+#   auto-dection through `config.guess` and build-time of course, as in
+#
+#     make HOST=i386-mingw-cross
+#
+#   which can of course set at configure time as well using
+#
+#     configure --host=i386-mingw-cross
+#
+#   After the default has been created, additional rules can be appended
+#   that will not just recurse into the subdirectories and only ever exist
+#   in the srcdir toplevel makefile - these parts are read from the $2 =
+#   Makefile.mk file
+#
+#   The automatic rules are usually scanning the toplevel Makefile for lines
+#   like '#### $host |$builddir' to recognize the place where to recurse
+#   into. Usually, the last one is the only one used. However, almost all
+#   targets have an additional "*-all" rule which makes the script to
+#   recurse into _all_ variants of the current HOST (!!) setting. The "-all"
+#   suffix can be overriden for the macro as well.
+#
+#   a special rule is only given for things like "dist" that will copy the
+#   tarball from the builddir to the sourcedir (or $(PUB)) for reason of
+#   convenience.
+#
+# LICENSE
+#
+#   Copyright (c) 2009 Guido U. Draheim <guidod@gmx.de>
+#   Copyright (c) 2009 Alan Jenkins <alan-jenkins@tuffmail.co.uk>
+#
+#   This program is free software; you can redistribute it and/or modify it
+#   under the terms of the GNU General Public License as published by the
+#   Free Software Foundation; either version 3 of the License, or (at your
+#   option) any later version.
+#
+#   This program is distributed in the hope that it will be useful, but
+#   WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+#   Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License along
+#   with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+#   As a special exception, the respective Autoconf Macro's copyright owner
+#   gives unlimited permission to copy, distribute and modify the configure
+#   scripts that are the output of Autoconf when processing the Macro. You
+#   need not follow the terms of the GNU General Public License when using
+#   or distributing such scripts, even though portions of the text of the
+#   Macro appear in them. The GNU General Public License (GPL) does govern
+#   all other use of the material that constitutes the Autoconf Macro.
+#
+#   This special exception to the GPL applies to versions of the Autoconf
+#   Macro released by the Autoconf Archive. When you make and distribute a
+#   modified version of the Autoconf Macro, you may extend this special
+#   exception to the GPL to apply to your modified version as well.
+
+#serial 23
+
+AC_DEFUN([AX_ENABLE_BUILDDIR],[
+AC_REQUIRE([AC_CANONICAL_HOST])[]dnl
+AC_REQUIRE([AX_CONFIGURE_ARGS])[]dnl
+AC_REQUIRE([AM_AUX_DIR_EXPAND])[]dnl
+AC_BEFORE([$0],[AM_INIT_AUTOMAKE])dnl
+AS_VAR_PUSHDEF([SUB],[ax_enable_builddir])dnl
+AS_VAR_PUSHDEF([AUX],[ax_enable_builddir_auxdir])dnl
+AS_VAR_PUSHDEF([SED],[ax_enable_builddir_sed])dnl
+SUB="."
+AC_ARG_ENABLE([builddir], AS_HELP_STRING(
+  [--disable-builddir],[disable automatic build in subdir of sources])
+  ,[SUB="$enableval"], [SUB="auto"])
+if test ".$ac_srcdir_defaulted" != ".no" ; then
+if test ".$srcdir" = ".." ; then
+  if test -f config.status ; then
+    AC_MSG_NOTICE(toplevel srcdir already configured... skipping subdir build)
+  else
+    test ".$SUB" = "."  && SUB="."
+    test ".$SUB" = ".no"  && SUB="."
+    test ".$TARGET" = "." && TARGET="$target"
+    test ".$SUB" = ".auto" && SUB="m4_ifval([$1], [$1],[$TARGET])"
+    if test ".$SUB" != ".." ; then    # we know where to go and
+      AS_MKDIR_P([$SUB])
+      echo __.$SUB.__ > $SUB/conftest.tmp
+      cd $SUB
+      if grep __.$SUB.__ conftest.tmp >/dev/null 2>/dev/null ; then
+        rm conftest.tmp
+        AC_MSG_RESULT([continue configure in default builddir "./$SUB"])
+      else
+        AC_MSG_ERROR([could not change to default builddir "./$SUB"])
+      fi
+      srcdir=`echo "$SUB" |
+              sed -e 's,^\./,,;s,[[^/]]$,&/,;s,[[^/]]*/,../,g;s,[[/]]$,,;'`
+      # going to restart from subdirectory location
+      test -f $srcdir/config.log   && mv $srcdir/config.log   .
+      test -f $srcdir/confdefs.h   && mv $srcdir/confdefs.h   .
+      test -f $srcdir/conftest.log && mv $srcdir/conftest.log .
+      test -f $srcdir/$cache_file  && mv $srcdir/$cache_file  .
+      AC_MSG_RESULT(....exec $SHELL $srcdir/[$]0 "--srcdir=$srcdir" "--enable-builddir=$SUB" ${1+"[$]@"})
+      case "[$]0" in # restart
+       [/\\]*) eval $SHELL "'[$]0'" "'--srcdir=$srcdir'" "'--enable-builddir=$SUB'" $ac_configure_args ;;
+       *) eval $SHELL "'$srcdir/[$]0'" "'--srcdir=$srcdir'" "'--enable-builddir=$SUB'" $ac_configure_args ;;
+      esac ; exit $?
+    fi
+  fi
+fi fi
+test ".$SUB" = ".auto" && SUB="."
+dnl ac_path_prog uses "set dummy" to override $@ which would defeat the "exec"
+AC_PATH_PROG(SED,gsed sed, sed)
+AUX="$am_aux_dir"
+AS_VAR_POPDEF([SED])dnl
+AS_VAR_POPDEF([AUX])dnl
+AS_VAR_POPDEF([SUB])dnl
+AC_CONFIG_COMMANDS([buildir],[dnl .............. config.status ..............
+AS_VAR_PUSHDEF([SUB],[ax_enable_builddir])dnl
+AS_VAR_PUSHDEF([TOP],[top_srcdir])dnl
+AS_VAR_PUSHDEF([SRC],[ac_top_srcdir])dnl
+AS_VAR_PUSHDEF([AUX],[ax_enable_builddir_auxdir])dnl
+AS_VAR_PUSHDEF([SED],[ax_enable_builddir_sed])dnl
+pushdef([END],[Makefile.mk])dnl
+pushdef([_ALL],[ifelse([$3],,[-all],[$3])])dnl
+  SRC="$ax_enable_builddir_srcdir"
+  if test ".$SUB" = ".." ; then
+    if test -f "$TOP/Makefile" ; then
+      AC_MSG_NOTICE([skipping TOP/Makefile - left untouched])
+    else
+      AC_MSG_NOTICE([skipping TOP/Makefile - not created])
+    fi
+  else
+    if test -f "$SRC/Makefile" ; then
+      a=`grep "^VERSION " "$SRC/Makefile"` ; b=`grep "^VERSION " Makefile`
+      test "$a" != "$b" && rm "$SRC/Makefile"
+    fi
+    if test -f "$SRC/Makefile" ; then
+	echo "$SRC/Makefile : $SRC/Makefile.in" > $tmp/conftemp.mk
+	echo "	[]@ echo 'REMOVED,,,' >\$[]@" >> $tmp/conftemp.mk
+      eval "${MAKE-make} -f $tmp/conftemp.mk 2>/dev/null >/dev/null"
+      if grep '^REMOVED,,,' "$SRC/Makefile" >/dev/null
+      then rm $SRC/Makefile ; fi
+      cp $tmp/conftemp.mk $SRC/makefiles.mk~      ## DEBUGGING
+    fi
+    if test ! -f "$SRC/Makefile" ; then
+      AC_MSG_NOTICE([create TOP/Makefile guessed from local Makefile])
+      x='`' ; cat >$tmp/conftemp.sed <<_EOF
+/^\$/n
+x
+/^\$/bS
+x
+/\\\\\$/{H;d;}
+{H;s/.*//;x;}
+bM
+:S
+x
+/\\\\\$/{h;d;}
+{h;s/.*//;x;}
+:M
+s/\\(\\n\\)	/\\1 /g
+/^	/d
+/^[[	 ]]*[[\\#]]/d
+/^VPATH *=/d
+s/^srcdir *=.*/srcdir = ./
+s/^top_srcdir *=.*/top_srcdir = ./
+/[[:=]]/!d
+/^\\./d
+dnl Now handle rules (i.e. lines containing ":" but not " = ").
+/ = /b
+/ .= /b
+/:/!b
+s/:.*/:/
+s/ /  /g
+s/ \\([[a-z]][[a-z-]]*[[a-zA-Z0-9]]\\)\\([[ :]]\\)/ \\1 \\1[]_ALL\\2/g
+s/^\\([[a-z]][[a-z-]]*[[a-zA-Z0-9]]\\)\\([[ :]]\\)/\\1 \\1[]_ALL\\2/
+s/  / /g
+/^all all[]_ALL[[ :]]/i\\
+all-configured : all[]_ALL
+dnl dist-all exists... and would make for dist-all-all
+s/ [[a-zA-Z0-9-]]*[]_ALL [[a-zA-Z0-9-]]*[]_ALL[]_ALL//g
+/[]_ALL[]_ALL/d
+a\\
+	@ HOST="\$(HOST)\" \\\\\\
+	; test ".\$\$HOST" = "." && HOST=$x sh $AUX/config.guess $x \\\\\\
+	; BUILD=$x grep "^#### \$\$HOST " Makefile | sed -e 's/.*|//' $x \\\\\\
+	; use=$x basename "\$\@" _ALL $x; n=$x echo \$\$BUILD | wc -w $x \\\\\\
+	; echo "MAKE \$\$HOST : \$\$n * \$\@"; if test "\$\$n" -eq "0" ; then : \\\\\\
+	; BUILD=$x grep "^####.*|" Makefile |tail -1| sed -e 's/.*|//' $x ; fi \\\\\\
+	; test ".\$\$BUILD" = "." && BUILD="." \\\\\\
+	; test "\$\$use" = "\$\@" && BUILD=$x echo "\$\$BUILD" | tail -1 $x \\\\\\
+	; for i in \$\$BUILD ; do test ".\$\$i" = "." && continue \\\\\\
+	; (cd "\$\$i" && test ! -f configure && \$(MAKE) \$\$use) || exit; done
+dnl special rule add-on: "dist" copies the tarball to $(PUB). (source tree)
+/dist[]_ALL *:/a\\
+	@ HOST="\$(HOST)\" \\\\\\
+	; test ".\$\$HOST" = "." && HOST=$x sh $AUX/config.guess $x \\\\\\
+	; BUILD=$x grep "^#### \$\$HOST " Makefile | sed -e 's/.*|//' $x \\\\\\
+	; found=$x echo \$\$BUILD | wc -w $x \\\\\\
+	; echo "MAKE \$\$HOST : \$\$found \$(PACKAGE)-\$(VERSION).tar.*" \\\\\\
+	; if test "\$\$found" -eq "0" ; then : \\\\\\
+	; BUILD=$x grep "^#### .*|" Makefile |tail -1| sed -e 's/.*|//' $x \\\\\\
+	; fi ; for i in \$\$BUILD ; do test ".\$\$i" = "." && continue \\\\\\
+	; for f in \$\$i/\$(PACKAGE)-\$(VERSION).tar.* \\\\\\
+	; do test -f "\$\$f" && mv "\$\$f" \$(PUB). ; done ; break ; done
+dnl special rule add-on: "dist-foo" copies all the archives to $(PUB). (source tree)
+/dist-[[a-zA-Z0-9]]*[]_ALL *:/a\\
+	@ HOST="\$(HOST)\" \\\\\\
+	; test ".\$\$HOST" = "." && HOST=$x sh ./config.guess $x \\\\\\
+	; BUILD=$x grep "^#### \$\$HOST " Makefile | sed -e 's/.*|//' $x \\\\\\
+	; found=$x echo \$\$BUILD | wc -w $x \\\\\\
+	; echo "MAKE \$\$HOST : \$\$found \$(PACKAGE)-\$(VERSION).*" \\\\\\
+	; if test "\$\$found" -eq "0" ; then : \\\\\\
+	; BUILD=$x grep "^#### .*|" Makefile |tail -1| sed -e 's/.*|//' $x \\\\\\
+	; fi ; for i in \$\$BUILD ; do test ".\$\$i" = "." && continue \\\\\\
+	; for f in \$\$i/\$(PACKAGE)-\$(VERSION).* \\\\\\
+	; do test -f "\$\$f" && mv "\$\$f" \$(PUB). ; done ; break ; done
+dnl special rule add-on: "distclean" removes all local builddirs completely
+/distclean[]_ALL *:/a\\
+	@ HOST="\$(HOST)\" \\\\\\
+	; test ".\$\$HOST" = "." && HOST=$x sh $AUX/config.guess $x \\\\\\
+	; BUILD=$x grep "^#### .*|" Makefile | sed -e 's/.*|//' $x \\\\\\
+	; use=$x basename "\$\@" _ALL $x; n=$x echo \$\$BUILD | wc -w $x \\\\\\
+	; echo "MAKE \$\$HOST : \$\$n * \$\@ (all local builds)" \\\\\\
+	; test ".\$\$BUILD" = "." && BUILD="." \\\\\\
+	; for i in \$\$BUILD ; do test ".\$\$i" = "." && continue \\\\\\
+	; echo "# rm -r \$\$i"; done ; echo "# (sleep 3)" ; sleep 3 \\\\\\
+	; for i in \$\$BUILD ; do test ".\$\$i" = "." && continue \\\\\\
+	; echo "\$\$i" | grep "^/" > /dev/null && continue \\\\\\
+	; echo "\$\$i" | grep "^../" > /dev/null && continue \\\\\\
+	; echo "rm -r \$\$i"; (rm -r "\$\$i") ; done ; rm Makefile
+_EOF
+      cp "$tmp/conftemp.sed" "$SRC/makefile.sed~"            ## DEBUGGING
+      $SED -f $tmp/conftemp.sed Makefile >$SRC/Makefile
+      if test -f "$SRC/m4_ifval([$2],[$2],[END])" ; then
+        AC_MSG_NOTICE([extend TOP/Makefile with TOP/m4_ifval([$2],[$2],[END])])
+        cat $SRC/END >>$SRC/Makefile
+      fi ; xxxx="####"
+      echo "$xxxx CONFIGURATIONS FOR TOPLEVEL MAKEFILE: " >>$SRC/Makefile
+      # sanity check
+      if grep '^; echo "MAKE ' $SRC/Makefile >/dev/null ; then
+        AC_MSG_NOTICE([buggy sed found - it deletes tab in "a" text parts])
+        $SED -e '/^@ HOST=/s/^/	/' -e '/^; /s/^/	/' $SRC/Makefile \
+          >$SRC/Makefile~
+        (test -s $SRC/Makefile~ && mv $SRC/Makefile~ $SRC/Makefile) 2>/dev/null
+      fi
+    else
+      xxxx="\\#\\#\\#\\#"
+      # echo "/^$xxxx *$ax_enable_builddir_host /d" >$tmp/conftemp.sed
+      echo "s!^$xxxx [[^|]]* | *$SUB *\$!$xxxx ...... $SUB!" >$tmp/conftemp.sed
+      $SED -f "$tmp/conftemp.sed" "$SRC/Makefile" >$tmp/mkfile.tmp
+        cp "$tmp/conftemp.sed" "$SRC/makefiles.sed~"         ## DEBUGGING
+        cp "$tmp/mkfile.tmp"   "$SRC/makefiles.out~"         ## DEBUGGING
+      if cmp -s "$SRC/Makefile" "$tmp/mkfile.tmp" 2>/dev/null ; then
+        AC_MSG_NOTICE([keeping TOP/Makefile from earlier configure])
+        rm "$tmp/mkfile.tmp"
+      else
+        AC_MSG_NOTICE([reusing TOP/Makefile from earlier configure])
+        mv "$tmp/mkfile.tmp" "$SRC/Makefile"
+      fi
+    fi
+    AC_MSG_NOTICE([build in $SUB (HOST=$ax_enable_builddir_host)])
+    xxxx="####"
+    echo "$xxxx" "$ax_enable_builddir_host" "|$SUB" >>$SRC/Makefile
+  fi
+popdef([END])dnl
+AS_VAR_POPDEF([SED])dnl
+AS_VAR_POPDEF([AUX])dnl
+AS_VAR_POPDEF([SRC])dnl
+AS_VAR_POPDEF([TOP])dnl
+AS_VAR_POPDEF([SUB])dnl
+],[dnl
+ax_enable_builddir_srcdir="$srcdir"                    # $srcdir
+ax_enable_builddir_host="$HOST"                        # $HOST / $host
+ax_enable_builddir_version="$VERSION"                  # $VERSION
+ax_enable_builddir_package="$PACKAGE"                  # $PACKAGE
+ax_enable_builddir_auxdir="$ax_enable_builddir_auxdir" # $AUX
+ax_enable_builddir_sed="$ax_enable_builddir_sed"       # $SED
+ax_enable_builddir="$ax_enable_builddir"               # $SUB
+])dnl
+])
diff --git a/Modules/_ctypes/libffi/m4/ax_gcc_archflag.m4 b/Modules/_ctypes/libffi/m4/ax_gcc_archflag.m4
new file mode 100644
index 0000000..3fd050e
--- /dev/null
+++ b/Modules/_ctypes/libffi/m4/ax_gcc_archflag.m4
@@ -0,0 +1,225 @@
+# ===========================================================================
+#      http://www.gnu.org/software/autoconf-archive/ax_gcc_archflag.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+#   AX_GCC_ARCHFLAG([PORTABLE?], [ACTION-SUCCESS], [ACTION-FAILURE])
+#
+# DESCRIPTION
+#
+#   This macro tries to guess the "native" arch corresponding to the target
+#   architecture for use with gcc's -march=arch or -mtune=arch flags. If
+#   found, the cache variable $ax_cv_gcc_archflag is set to this flag and
+#   ACTION-SUCCESS is executed; otherwise $ax_cv_gcc_archflag is set to
+#   "unknown" and ACTION-FAILURE is executed. The default ACTION-SUCCESS is
+#   to add $ax_cv_gcc_archflag to the end of $CFLAGS.
+#
+#   PORTABLE? should be either [yes] (default) or [no]. In the former case,
+#   the flag is set to -mtune (or equivalent) so that the architecture is
+#   only used for tuning, but the instruction set used is still portable. In
+#   the latter case, the flag is set to -march (or equivalent) so that
+#   architecture-specific instructions are enabled.
+#
+#   The user can specify --with-gcc-arch=<arch> in order to override the
+#   macro's choice of architecture, or --without-gcc-arch to disable this.
+#
+#   When cross-compiling, or if $CC is not gcc, then ACTION-FAILURE is
+#   called unless the user specified --with-gcc-arch manually.
+#
+#   Requires macros: AX_CHECK_COMPILE_FLAG, AX_GCC_X86_CPUID
+#
+#   (The main emphasis here is on recent CPUs, on the principle that doing
+#   high-performance computing on old hardware is uncommon.)
+#
+# LICENSE
+#
+#   Copyright (c) 2008 Steven G. Johnson <stevenj@alum.mit.edu>
+#   Copyright (c) 2008 Matteo Frigo
+#   Copyright (c) 2012 Tsukasa Oi
+#
+#   This program is free software: you can redistribute it and/or modify it
+#   under the terms of the GNU General Public License as published by the
+#   Free Software Foundation, either version 3 of the License, or (at your
+#   option) any later version.
+#
+#   This program is distributed in the hope that it will be useful, but
+#   WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+#   Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License along
+#   with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+#   As a special exception, the respective Autoconf Macro's copyright owner
+#   gives unlimited permission to copy, distribute and modify the configure
+#   scripts that are the output of Autoconf when processing the Macro. You
+#   need not follow the terms of the GNU General Public License when using
+#   or distributing such scripts, even though portions of the text of the
+#   Macro appear in them. The GNU General Public License (GPL) does govern
+#   all other use of the material that constitutes the Autoconf Macro.
+#
+#   This special exception to the GPL applies to versions of the Autoconf
+#   Macro released by the Autoconf Archive. When you make and distribute a
+#   modified version of the Autoconf Macro, you may extend this special
+#   exception to the GPL to apply to your modified version as well.
+
+#serial 11
+
+AC_DEFUN([AX_GCC_ARCHFLAG],
+[AC_REQUIRE([AC_PROG_CC])
+AC_REQUIRE([AC_CANONICAL_HOST])
+
+AC_ARG_WITH(gcc-arch, [AS_HELP_STRING([--with-gcc-arch=<arch>], [use architecture <arch> for gcc -march/-mtune, instead of guessing])],
+	ax_gcc_arch=$withval, ax_gcc_arch=yes)
+
+AC_MSG_CHECKING([for gcc architecture flag])
+AC_MSG_RESULT([])
+AC_CACHE_VAL(ax_cv_gcc_archflag,
+[
+ax_cv_gcc_archflag="unknown"
+
+if test "$GCC" = yes; then
+
+if test "x$ax_gcc_arch" = xyes; then
+ax_gcc_arch=""
+if test "$cross_compiling" = no; then
+case $host_cpu in
+  i[[3456]]86*|x86_64*) # use cpuid codes
+     AX_GCC_X86_CPUID(0)
+     AX_GCC_X86_CPUID(1)
+     case $ax_cv_gcc_x86_cpuid_0 in
+       *:756e6547:*:*) # Intel
+          case $ax_cv_gcc_x86_cpuid_1 in
+	    *5[[48]]?:*:*:*) ax_gcc_arch="pentium-mmx pentium" ;;
+	    *5??:*:*:*) ax_gcc_arch=pentium ;;
+	    *0?6[[3456]]?:*:*:*) ax_gcc_arch="pentium2 pentiumpro" ;;
+	    *0?6a?:*[[01]]:*:*) ax_gcc_arch="pentium2 pentiumpro" ;;
+	    *0?6a?:*[[234]]:*:*) ax_gcc_arch="pentium3 pentiumpro" ;;
+	    *0?6[[9de]]?:*:*:*) ax_gcc_arch="pentium-m pentium3 pentiumpro" ;;
+	    *0?6[[78b]]?:*:*:*) ax_gcc_arch="pentium3 pentiumpro" ;;
+	    *0?6f?:*:*:*|*1?66?:*:*:*) ax_gcc_arch="core2 pentium-m pentium3 pentiumpro" ;;
+	    *1?6[[7d]]?:*:*:*) ax_gcc_arch="penryn core2 pentium-m pentium3 pentiumpro" ;;
+	    *1?6[[aef]]?:*:*:*|*2?6[[5cef]]?:*:*:*) ax_gcc_arch="corei7 core2 pentium-m pentium3 pentiumpro" ;;
+	    *1?6c?:*:*:*|*[[23]]?66?:*:*:*) ax_gcc_arch="atom core2 pentium-m pentium3 pentiumpro" ;;
+	    *2?6[[ad]]?:*:*:*) ax_gcc_arch="corei7-avx corei7 core2 pentium-m pentium3 pentiumpro" ;;
+	    *0?6??:*:*:*) ax_gcc_arch=pentiumpro ;;
+	    *6??:*:*:*) ax_gcc_arch="core2 pentiumpro" ;;
+	    ?000?f3[[347]]:*:*:*|?000?f4[1347]:*:*:*|?000?f6?:*:*:*)
+		case $host_cpu in
+	          x86_64*) ax_gcc_arch="nocona pentium4 pentiumpro" ;;
+	          *) ax_gcc_arch="prescott pentium4 pentiumpro" ;;
+	        esac ;;
+	    ?000?f??:*:*:*) ax_gcc_arch="pentium4 pentiumpro";;
+          esac ;;
+       *:68747541:*:*) # AMD
+          case $ax_cv_gcc_x86_cpuid_1 in
+	    *5[[67]]?:*:*:*) ax_gcc_arch=k6 ;;
+	    *5[[8d]]?:*:*:*) ax_gcc_arch="k6-2 k6" ;;
+	    *5[[9]]?:*:*:*) ax_gcc_arch="k6-3 k6" ;;
+	    *60?:*:*:*) ax_gcc_arch=k7 ;;
+	    *6[[12]]?:*:*:*) ax_gcc_arch="athlon k7" ;;
+	    *6[[34]]?:*:*:*) ax_gcc_arch="athlon-tbird k7" ;;
+	    *67?:*:*:*) ax_gcc_arch="athlon-4 athlon k7" ;;
+	    *6[[68a]]?:*:*:*)
+	       AX_GCC_X86_CPUID(0x80000006) # L2 cache size
+	       case $ax_cv_gcc_x86_cpuid_0x80000006 in
+                 *:*:*[[1-9a-f]]??????:*) # (L2 = ecx >> 16) >= 256
+			ax_gcc_arch="athlon-xp athlon-4 athlon k7" ;;
+                 *) ax_gcc_arch="athlon-4 athlon k7" ;;
+	       esac ;;
+	    ?00??f[[4cef8b]]?:*:*:*) ax_gcc_arch="athlon64 k8" ;;
+	    ?00??f5?:*:*:*) ax_gcc_arch="opteron k8" ;;
+	    ?00??f7?:*:*:*) ax_gcc_arch="athlon-fx opteron k8" ;;
+	    ?00??f??:*:*:*) ax_gcc_arch="k8" ;;
+	    ?05??f??:*:*:*) ax_gcc_arch="btver1 amdfam10 k8" ;;
+	    ?06??f??:*:*:*) ax_gcc_arch="bdver1 amdfam10 k8" ;;
+	    *f??:*:*:*) ax_gcc_arch="amdfam10 k8" ;;
+          esac ;;
+	*:746e6543:*:*) # IDT
+	   case $ax_cv_gcc_x86_cpuid_1 in
+	     *54?:*:*:*) ax_gcc_arch=winchip-c6 ;;
+	     *58?:*:*:*) ax_gcc_arch=winchip2 ;;
+	     *6[[78]]?:*:*:*) ax_gcc_arch=c3 ;;
+	     *69?:*:*:*) ax_gcc_arch="c3-2 c3" ;;
+	   esac ;;
+     esac
+     if test x"$ax_gcc_arch" = x; then # fallback
+	case $host_cpu in
+	  i586*) ax_gcc_arch=pentium ;;
+	  i686*) ax_gcc_arch=pentiumpro ;;
+        esac
+     fi
+     ;;
+
+  sparc*)
+     AC_PATH_PROG([PRTDIAG], [prtdiag], [prtdiag], [$PATH:/usr/platform/`uname -i`/sbin/:/usr/platform/`uname -m`/sbin/])
+     cputype=`(((grep cpu /proc/cpuinfo | cut -d: -f2) ; ($PRTDIAG -v |grep -i sparc) ; grep -i cpu /var/run/dmesg.boot ) | head -n 1) 2> /dev/null`
+     cputype=`echo "$cputype" | tr -d ' -' |tr $as_cr_LETTERS $as_cr_letters`
+     case $cputype in
+         *ultrasparciv*) ax_gcc_arch="ultrasparc4 ultrasparc3 ultrasparc v9" ;;
+         *ultrasparciii*) ax_gcc_arch="ultrasparc3 ultrasparc v9" ;;
+         *ultrasparc*) ax_gcc_arch="ultrasparc v9" ;;
+         *supersparc*|*tms390z5[[05]]*) ax_gcc_arch="supersparc v8" ;;
+         *hypersparc*|*rt62[[056]]*) ax_gcc_arch="hypersparc v8" ;;
+         *cypress*) ax_gcc_arch=cypress ;;
+     esac ;;
+
+  alphaev5) ax_gcc_arch=ev5 ;;
+  alphaev56) ax_gcc_arch=ev56 ;;
+  alphapca56) ax_gcc_arch="pca56 ev56" ;;
+  alphapca57) ax_gcc_arch="pca57 pca56 ev56" ;;
+  alphaev6) ax_gcc_arch=ev6 ;;
+  alphaev67) ax_gcc_arch=ev67 ;;
+  alphaev68) ax_gcc_arch="ev68 ev67" ;;
+  alphaev69) ax_gcc_arch="ev69 ev68 ev67" ;;
+  alphaev7) ax_gcc_arch="ev7 ev69 ev68 ev67" ;;
+  alphaev79) ax_gcc_arch="ev79 ev7 ev69 ev68 ev67" ;;
+
+  powerpc*)
+     cputype=`((grep cpu /proc/cpuinfo | head -n 1 | cut -d: -f2 | cut -d, -f1 | sed 's/ //g') ; /usr/bin/machine ; /bin/machine; grep CPU /var/run/dmesg.boot | head -n 1 | cut -d" " -f2) 2> /dev/null`
+     cputype=`echo $cputype | sed -e 's/ppc//g;s/ *//g'`
+     case $cputype in
+       *750*) ax_gcc_arch="750 G3" ;;
+       *740[[0-9]]*) ax_gcc_arch="$cputype 7400 G4" ;;
+       *74[[4-5]][[0-9]]*) ax_gcc_arch="$cputype 7450 G4" ;;
+       *74[[0-9]][[0-9]]*) ax_gcc_arch="$cputype G4" ;;
+       *970*) ax_gcc_arch="970 G5 power4";;
+       *POWER4*|*power4*|*gq*) ax_gcc_arch="power4 970";;
+       *POWER5*|*power5*|*gr*|*gs*) ax_gcc_arch="power5 power4 970";;
+       603ev|8240) ax_gcc_arch="$cputype 603e 603";;
+       *) ax_gcc_arch=$cputype ;;
+     esac
+     ax_gcc_arch="$ax_gcc_arch powerpc"
+     ;;
+esac
+fi # not cross-compiling
+fi # guess arch
+
+if test "x$ax_gcc_arch" != x -a "x$ax_gcc_arch" != xno; then
+for arch in $ax_gcc_arch; do
+  if test "x[]m4_default([$1],yes)" = xyes; then # if we require portable code
+    flags="-mtune=$arch"
+    # -mcpu=$arch and m$arch generate nonportable code on every arch except
+    # x86.  And some other arches (e.g. Alpha) don't accept -mtune.  Grrr.
+    case $host_cpu in i*86|x86_64*) flags="$flags -mcpu=$arch -m$arch";; esac
+  else
+    flags="-march=$arch -mcpu=$arch -m$arch"
+  fi
+  for flag in $flags; do
+    AX_CHECK_COMPILE_FLAG($flag, [ax_cv_gcc_archflag=$flag; break])
+  done
+  test "x$ax_cv_gcc_archflag" = xunknown || break
+done
+fi
+
+fi # $GCC=yes
+])
+AC_MSG_CHECKING([for gcc architecture flag])
+AC_MSG_RESULT($ax_cv_gcc_archflag)
+if test "x$ax_cv_gcc_archflag" = xunknown; then
+  m4_default([$3],:)
+else
+  m4_default([$2], [CFLAGS="$CFLAGS $ax_cv_gcc_archflag"])
+fi
+])
diff --git a/Modules/_ctypes/libffi/m4/ax_gcc_x86_cpuid.m4 b/Modules/_ctypes/libffi/m4/ax_gcc_x86_cpuid.m4
new file mode 100644
index 0000000..7d46fee
--- /dev/null
+++ b/Modules/_ctypes/libffi/m4/ax_gcc_x86_cpuid.m4
@@ -0,0 +1,79 @@
+# ===========================================================================
+#     http://www.gnu.org/software/autoconf-archive/ax_gcc_x86_cpuid.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+#   AX_GCC_X86_CPUID(OP)
+#
+# DESCRIPTION
+#
+#   On Pentium and later x86 processors, with gcc or a compiler that has a
+#   compatible syntax for inline assembly instructions, run a small program
+#   that executes the cpuid instruction with input OP. This can be used to
+#   detect the CPU type.
+#
+#   On output, the values of the eax, ebx, ecx, and edx registers are stored
+#   as hexadecimal strings as "eax:ebx:ecx:edx" in the cache variable
+#   ax_cv_gcc_x86_cpuid_OP.
+#
+#   If the cpuid instruction fails (because you are running a
+#   cross-compiler, or because you are not using gcc, or because you are on
+#   a processor that doesn't have this instruction), ax_cv_gcc_x86_cpuid_OP
+#   is set to the string "unknown".
+#
+#   This macro mainly exists to be used in AX_GCC_ARCHFLAG.
+#
+# LICENSE
+#
+#   Copyright (c) 2008 Steven G. Johnson <stevenj@alum.mit.edu>
+#   Copyright (c) 2008 Matteo Frigo
+#
+#   This program is free software: you can redistribute it and/or modify it
+#   under the terms of the GNU General Public License as published by the
+#   Free Software Foundation, either version 3 of the License, or (at your
+#   option) any later version.
+#
+#   This program is distributed in the hope that it will be useful, but
+#   WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+#   Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License along
+#   with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+#   As a special exception, the respective Autoconf Macro's copyright owner
+#   gives unlimited permission to copy, distribute and modify the configure
+#   scripts that are the output of Autoconf when processing the Macro. You
+#   need not follow the terms of the GNU General Public License when using
+#   or distributing such scripts, even though portions of the text of the
+#   Macro appear in them. The GNU General Public License (GPL) does govern
+#   all other use of the material that constitutes the Autoconf Macro.
+#
+#   This special exception to the GPL applies to versions of the Autoconf
+#   Macro released by the Autoconf Archive. When you make and distribute a
+#   modified version of the Autoconf Macro, you may extend this special
+#   exception to the GPL to apply to your modified version as well.
+
+#serial 7
+
+AC_DEFUN([AX_GCC_X86_CPUID],
+[AC_REQUIRE([AC_PROG_CC])
+AC_LANG_PUSH([C])
+AC_CACHE_CHECK(for x86 cpuid $1 output, ax_cv_gcc_x86_cpuid_$1,
+ [AC_RUN_IFELSE([AC_LANG_PROGRAM([#include <stdio.h>], [
+     int op = $1, eax, ebx, ecx, edx;
+     FILE *f;
+      __asm__("cpuid"
+        : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx)
+        : "a" (op));
+     f = fopen("conftest_cpuid", "w"); if (!f) return 1;
+     fprintf(f, "%x:%x:%x:%x\n", eax, ebx, ecx, edx);
+     fclose(f);
+     return 0;
+])],
+     [ax_cv_gcc_x86_cpuid_$1=`cat conftest_cpuid`; rm -f conftest_cpuid],
+     [ax_cv_gcc_x86_cpuid_$1=unknown; rm -f conftest_cpuid],
+     [ax_cv_gcc_x86_cpuid_$1=unknown])])
+AC_LANG_POP([C])
+])
diff --git a/Modules/_ctypes/libffi/m4/libtool.m4 b/Modules/_ctypes/libffi/m4/libtool.m4
index 671cde1..3318f27 100644
--- a/Modules/_ctypes/libffi/m4/libtool.m4
+++ b/Modules/_ctypes/libffi/m4/libtool.m4
@@ -1,7 +1,8 @@
 # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
 #
 #   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008 Free Software Foundation, Inc.
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
 #   Written by Gordon Matzigkeit, 1996
 #
 # This file is free software; the Free Software Foundation gives
@@ -10,7 +11,8 @@
 
 m4_define([_LT_COPYING], [dnl
 #   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008 Free Software Foundation, Inc.
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
 #   Written by Gordon Matzigkeit, 1996
 #
 #   This file is part of GNU Libtool.
@@ -37,7 +39,7 @@
 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 ])
 
-# serial 56 LT_INIT
+# serial 57 LT_INIT
 
 
 # LT_PREREQ(VERSION)
@@ -66,6 +68,7 @@
 # ------------------
 AC_DEFUN([LT_INIT],
 [AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
 AC_BEFORE([$0], [LT_LANG])dnl
 AC_BEFORE([$0], [LT_OUTPUT])dnl
 AC_BEFORE([$0], [LTDL_INIT])dnl
@@ -82,6 +85,8 @@
 AC_REQUIRE([LTOBSOLETE_VERSION])dnl
 m4_require([_LT_PROG_LTMAIN])dnl
 
+_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
+
 dnl Parse OPTIONS
 _LT_SET_OPTIONS([$0], [$1])
 
@@ -118,7 +123,7 @@
     *) break;;
   esac
 done
-cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
 ])
 
 
@@ -138,6 +143,11 @@
 m4_defun([_LT_SETUP],
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+
+_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
+dnl
 _LT_DECL([], [host_alias], [0], [The host system])dnl
 _LT_DECL([], [host], [0])dnl
 _LT_DECL([], [host_os], [0])dnl
@@ -160,10 +170,13 @@
 dnl
 m4_require([_LT_FILEUTILS_DEFAULTS])dnl
 m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
 m4_require([_LT_CMD_RELOAD])dnl
 m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
 m4_require([_LT_CMD_OLD_ARCHIVE])dnl
 m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_WITH_SYSROOT])dnl
 
 _LT_CONFIG_LIBTOOL_INIT([
 # See if we are running on zsh, and set the options which allow our
@@ -179,7 +192,6 @@
 _LT_CHECK_OBJDIR
 
 m4_require([_LT_TAG_COMPILER])dnl
-_LT_PROG_ECHO_BACKSLASH
 
 case $host_os in
 aix3*)
@@ -193,23 +205,6 @@
   ;;
 esac
 
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([["`\\]]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
 # Global variables:
 ofile=libtool
 can_build_shared=yes
@@ -250,6 +245,28 @@
 ])# _LT_SETUP
 
 
+# _LT_PREPARE_SED_QUOTE_VARS
+# --------------------------
+# Define a few sed substitution that help us do robust quoting.
+m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
+[# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+])
+
 # _LT_PROG_LTMAIN
 # ---------------
 # Note that this code is called both from `configure', and `config.status'
@@ -408,7 +425,7 @@
 # declaration there will have the same value as in `configure'.  VARNAME
 # must have a single quote delimited value for this to work.
 m4_define([_LT_CONFIG_STATUS_DECLARE],
-[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
+[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
 
 
 # _LT_CONFIG_STATUS_DECLARATIONS
@@ -418,7 +435,7 @@
 # embedded single quotes properly.  In configure, this macro expands
 # each variable declared with _LT_DECL (and _LT_TAGDECL) into:
 #
-#    <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
+#    <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
 m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
 [m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
     [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
@@ -517,12 +534,20 @@
 LTCFLAGS='$LTCFLAGS'
 compiler='$compiler_DEFAULT'
 
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$[]1
+_LTECHO_EOF'
+}
+
 # Quote evaled strings.
 for var in lt_decl_all_varnames([[ \
 ]], lt_decl_quote_varnames); do
-    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
     *[[\\\\\\\`\\"\\\$]]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -533,9 +558,9 @@
 # Double-quote double-evaled strings.
 for var in lt_decl_all_varnames([[ \
 ]], lt_decl_dquote_varnames); do
-    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
     *[[\\\\\\\`\\"\\\$]]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -543,16 +568,38 @@
     esac
 done
 
-# Fix-up fallback echo if it was mangled by the above quoting rules.
-case \$lt_ECHO in
-*'\\\[$]0 --fallback-echo"')dnl "
-  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
-  ;;
-esac
-
 _LT_OUTPUT_LIBTOOL_INIT
 ])
 
+# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
+# ------------------------------------
+# Generate a child script FILE with all initialization necessary to
+# reuse the environment learned by the parent script, and make the
+# file executable.  If COMMENT is supplied, it is inserted after the
+# `#!' sequence but before initialization text begins.  After this
+# macro, additional text can be appended to FILE to form the body of
+# the child script.  The macro ends with non-zero status if the
+# file could not be fully written (such as if the disk is full).
+m4_ifdef([AS_INIT_GENERATED],
+[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
+[m4_defun([_LT_GENERATED_FILE_INIT],
+[m4_require([AS_PREPARE])]dnl
+[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
+[lt_write_fail=0
+cat >$1 <<_ASEOF || lt_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+$2
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$1 <<\_ASEOF || lt_write_fail=1
+AS_SHELL_SANITIZE
+_AS_PREPARE
+exec AS_MESSAGE_FD>&1
+_ASEOF
+test $lt_write_fail = 0 && chmod +x $1[]dnl
+m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
 
 # LT_OUTPUT
 # ---------
@@ -562,20 +609,11 @@
 AC_DEFUN([LT_OUTPUT],
 [: ${CONFIG_LT=./config.lt}
 AC_MSG_NOTICE([creating $CONFIG_LT])
-cat >"$CONFIG_LT" <<_LTEOF
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate a libtool stub with the current configuration.
-
-lt_cl_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_LTEOF
+_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
+[# Run this file to recreate a libtool stub with the current configuration.])
 
 cat >>"$CONFIG_LT" <<\_LTEOF
-AS_SHELL_SANITIZE
-_AS_PREPARE
-
-exec AS_MESSAGE_FD>&1
+lt_cl_silent=false
 exec AS_MESSAGE_LOG_FD>>config.log
 {
   echo
@@ -601,7 +639,7 @@
 m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
 configured by $[0], generated by m4_PACKAGE_STRING.
 
-Copyright (C) 2008 Free Software Foundation, Inc.
+Copyright (C) 2011 Free Software Foundation, Inc.
 This config.lt script is free software; the Free Software Foundation
 gives unlimited permision to copy, distribute and modify it."
 
@@ -646,15 +684,13 @@
 # appending to config.log, which fails on DOS, as config.log is still kept
 # open by configure.  Here we exec the FD to /dev/null, effectively closing
 # config.log, so it can be properly (re)opened and appended to by config.lt.
-if test "$no_create" != yes; then
-  lt_cl_success=:
-  test "$silent" = yes &&
-    lt_config_lt_args="$lt_config_lt_args --quiet"
-  exec AS_MESSAGE_LOG_FD>/dev/null
-  $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
-  exec AS_MESSAGE_LOG_FD>>config.log
-  $lt_cl_success || AS_EXIT(1)
-fi
+lt_cl_success=:
+test "$silent" = yes &&
+  lt_config_lt_args="$lt_config_lt_args --quiet"
+exec AS_MESSAGE_LOG_FD>/dev/null
+$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+exec AS_MESSAGE_LOG_FD>>config.log
+$lt_cl_success || AS_EXIT(1)
 ])# LT_OUTPUT
 
 
@@ -717,15 +753,12 @@
   # if finds mixed CR/LF and LF-only lines.  Since sed operates in
   # text mode, it properly converts lines to CR/LF.  This bash problem
   # is reportedly fixed, but why not run on old versions too?
-  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
-    || (rm -f "$cfgfile"; exit 1)
+  sed '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
 
-  _LT_PROG_XSI_SHELLFNS
+  _LT_PROG_REPLACE_SHELLFNS
 
-  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
-    || (rm -f "$cfgfile"; exit 1)
-
-  mv -f "$cfgfile" "$ofile" ||
+   mv -f "$cfgfile" "$ofile" ||
     (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
   chmod +x "$ofile"
 ],
@@ -770,6 +803,7 @@
 m4_case([$1],
   [C],			[_LT_LANG(C)],
   [C++],		[_LT_LANG(CXX)],
+  [Go],			[_LT_LANG(GO)],
   [Java],		[_LT_LANG(GCJ)],
   [Fortran 77],		[_LT_LANG(F77)],
   [Fortran],		[_LT_LANG(FC)],
@@ -791,6 +825,31 @@
 ])# _LT_LANG
 
 
+m4_ifndef([AC_PROG_GO], [
+############################################################
+# NOTE: This macro has been submitted for inclusion into   #
+#  GNU Autoconf as AC_PROG_GO.  When it is available in    #
+#  a released version of Autoconf we should remove this    #
+#  macro and use it instead.                               #
+############################################################
+m4_defun([AC_PROG_GO],
+[AC_LANG_PUSH(Go)dnl
+AC_ARG_VAR([GOC],     [Go compiler command])dnl
+AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
+_AC_ARG_VAR_LDFLAGS()dnl
+AC_CHECK_TOOL(GOC, gccgo)
+if test -z "$GOC"; then
+  if test -n "$ac_tool_prefix"; then
+    AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
+  fi
+fi
+if test -z "$GOC"; then
+  AC_CHECK_PROG(GOC, gccgo, gccgo, false)
+fi
+])#m4_defun
+])#m4_ifndef
+
+
 # _LT_LANG_DEFAULT_CONFIG
 # -----------------------
 m4_defun([_LT_LANG_DEFAULT_CONFIG],
@@ -821,6 +880,10 @@
        m4_ifdef([LT_PROG_GCJ],
 	[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
 
+AC_PROVIDE_IFELSE([AC_PROG_GO],
+  [LT_LANG(GO)],
+  [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
+
 AC_PROVIDE_IFELSE([LT_PROG_RC],
   [LT_LANG(RC)],
   [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
@@ -831,11 +894,13 @@
 AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
 AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
 AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
 dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
 dnl AC_DEFUN([AC_LIBTOOL_F77], [])
 dnl AC_DEFUN([AC_LIBTOOL_FC], [])
 dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+dnl AC_DEFUN([AC_LIBTOOL_RC], [])
 
 
 # _LT_TAG_COMPILER
@@ -921,7 +986,13 @@
 	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
 	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
         _lt_result=$?
-	if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+	# If there is a non-empty error log, and "single_module"
+	# appears in it, assume the flag caused a linker warning
+        if test -s conftest.err && $GREP single_module conftest.err; then
+	  cat conftest.err >&AS_MESSAGE_LOG_FD
+	# Otherwise, if the output was created with a 0 exit code from
+	# the compiler, it worked.
+	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
 	  lt_cv_apple_cc_single_mod=yes
 	else
 	  cat conftest.err >&AS_MESSAGE_LOG_FD
@@ -929,6 +1000,7 @@
 	rm -rf libconftest.dylib*
 	rm -f conftest.*
       fi])
+
     AC_CACHE_CHECK([for -exported_symbols_list linker flag],
       [lt_cv_ld_exported_symbols_list],
       [lt_cv_ld_exported_symbols_list=no
@@ -940,6 +1012,34 @@
 	[lt_cv_ld_exported_symbols_list=no])
 	LDFLAGS="$save_LDFLAGS"
     ])
+
+    AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
+      [lt_cv_ld_force_load=no
+      cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
+      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
+      echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
+      $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
+      echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
+      $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
+      cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
+      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+      _lt_result=$?
+      if test -s conftest.err && $GREP force_load conftest.err; then
+	cat conftest.err >&AS_MESSAGE_LOG_FD
+      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+	lt_cv_ld_force_load=yes
+      else
+	cat conftest.err >&AS_MESSAGE_LOG_FD
+      fi
+        rm -f conftest.err libconftest.a conftest conftest.c
+        rm -rf conftest.dSYM
+    ])
     case $host_os in
     rhapsody* | darwin1.[[012]])
       _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
@@ -967,7 +1067,7 @@
     else
       _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
     fi
-    if test "$DSYMUTIL" != ":"; then
+    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
       _lt_dsymutil='~$DSYMUTIL $lib || :'
     else
       _lt_dsymutil=
@@ -977,8 +1077,8 @@
 ])
 
 
-# _LT_DARWIN_LINKER_FEATURES
-# --------------------------
+# _LT_DARWIN_LINKER_FEATURES([TAG])
+# ---------------------------------
 # Checks for linker and compiler features on darwin
 m4_defun([_LT_DARWIN_LINKER_FEATURES],
 [
@@ -987,7 +1087,13 @@
   _LT_TAGVAR(hardcode_direct, $1)=no
   _LT_TAGVAR(hardcode_automatic, $1)=yes
   _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+    m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
+                  [FC],  [_LT_TAGVAR(compiler_needs_object, $1)=yes])
+  else
+    _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+  fi
   _LT_TAGVAR(link_all_deplibs, $1)=yes
   _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
   case $cc_basename in
@@ -995,7 +1101,7 @@
      *) _lt_dar_can_shared=$GCC ;;
   esac
   if test "$_lt_dar_can_shared" = "yes"; then
-    output_verbose_link_cmd=echo
+    output_verbose_link_cmd=func_echo_all
     _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
     _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
     _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
@@ -1011,203 +1117,142 @@
   fi
 ])
 
-# _LT_SYS_MODULE_PATH_AIX
-# -----------------------
+# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
+# ----------------------------------
 # Links a minimal program and checks the executable
 # for the system default hardcoded library path. In most cases,
 # this is /usr/lib:/lib, but when the MPI compilers are used
 # the location of the communication and MPI libs are included too.
 # If we don't find anything, use the default library path according
 # to the aix ld manual.
+# Store the results from the different compilers for each TAGNAME.
+# Allow to override them for all tags through lt_cv_aix_libpath.
 m4_defun([_LT_SYS_MODULE_PATH_AIX],
 [m4_require([_LT_DECL_SED])dnl
-AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi],[])
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
+  [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
+  lt_aix_libpath_sed='[
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }]'
+  _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi],[])
+  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
+  fi
+  ])
+  aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
+fi
 ])# _LT_SYS_MODULE_PATH_AIX
 
 
 # _LT_SHELL_INIT(ARG)
 # -------------------
 m4_define([_LT_SHELL_INIT],
-[ifdef([AC_DIVERSION_NOTICE],
-	     [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-	 [AC_DIVERT_PUSH(NOTICE)])
-$1
-AC_DIVERT_POP
-])# _LT_SHELL_INIT
+[m4_divert_text([M4SH-INIT], [$1
+])])# _LT_SHELL_INIT
+
 
 
 # _LT_PROG_ECHO_BACKSLASH
 # -----------------------
-# Add some code to the start of the generated configure script which
-# will find an echo command which doesn't interpret backslashes.
+# Find how we can fake an echo command that does not interpret backslash.
+# In particular, with Autoconf 2.60 or later we add some code to the start
+# of the generated configure script which will find a shell with a builtin
+# printf (which we can use as an echo command).
 m4_defun([_LT_PROG_ECHO_BACKSLASH],
-[_LT_SHELL_INIT([
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
+[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
 
-case X$lt_ECHO in
-X*--fallback-echo)
-  # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-  ;;
+AC_MSG_CHECKING([how to print strings])
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='printf %s\n'
+else
+  # Use this function as a fallback that always works.
+  func_fallback_echo ()
+  {
+    eval 'cat <<_LTECHO_EOF
+$[]1
+_LTECHO_EOF'
+  }
+  ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO "$*" 
+}
+
+case "$ECHO" in
+  printf*) AC_MSG_RESULT([printf]) ;;
+  print*) AC_MSG_RESULT([print -r]) ;;
+  *) AC_MSG_RESULT([cat]) ;;
 esac
 
-ECHO=${lt_ECHO-echo}
-if test "X[$]1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X[$]1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
-  # Yippee, $ECHO works!
-  :
-else
-  # Restart under the correct shell.
-  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
-fi
+m4_ifdef([_AS_DETECT_SUGGESTED],
+[_AS_DETECT_SUGGESTED([
+  test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test "X`printf %s $ECHO`" = "X$ECHO" \
+      || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
 
-if test "X[$]1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<_LT_EOF
-[$]*
-_LT_EOF
-  exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test -z "$lt_ECHO"; then
-  if test "X${echo_test_string+set}" != Xset; then
-    # find a string as large as possible, as long as the shell can cope with it
-    for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
-	 { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
-      then
-        break
-      fi
-    done
-  fi
-
-  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
-     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
-     test "X$echo_testing_string" = "X$echo_test_string"; then
-    :
-  else
-    # The Solaris, AIX, and Digital Unix default echo programs unquote
-    # backslashes.  This makes it impossible to quote backslashes using
-    #   echo "$something" | sed 's/\\/\\\\/g'
-    #
-    # So, first we look for a working echo in the user's PATH.
-
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for dir in $PATH /usr/ucb; do
-      IFS="$lt_save_ifs"
-      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-         test "X$echo_testing_string" = "X$echo_test_string"; then
-        ECHO="$dir/echo"
-        break
-      fi
-    done
-    IFS="$lt_save_ifs"
-
-    if test "X$ECHO" = Xecho; then
-      # We didn't find a better echo, so look for alternatives.
-      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
-         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
-         test "X$echo_testing_string" = "X$echo_test_string"; then
-        # This shell has a builtin print -r that does the trick.
-        ECHO='print -r'
-      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
-	   test "X$CONFIG_SHELL" != X/bin/ksh; then
-        # If we have ksh, try running configure again with it.
-        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-        export ORIGINAL_CONFIG_SHELL
-        CONFIG_SHELL=/bin/ksh
-        export CONFIG_SHELL
-        exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-      else
-        # Try using printf.
-        ECHO='printf %s\n'
-        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
-	   echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	  # Cool, printf works
-	  :
-        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	     test "X$echo_testing_string" = 'X\t' &&
-	     echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	     test "X$echo_testing_string" = "X$echo_test_string"; then
-	  CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	  export CONFIG_SHELL
-	  SHELL="$CONFIG_SHELL"
-	  export SHELL
-	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
-        elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	     test "X$echo_testing_string" = 'X\t' &&
-	     echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	     test "X$echo_testing_string" = "X$echo_test_string"; then
-	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
-        else
-	  # maybe with a smaller string...
-	  prev=:
-
-	  for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-	    if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
-	    then
-	      break
-	    fi
-	    prev="$cmd"
-	  done
-
-	  if test "$prev" != 'sed 50q "[$]0"'; then
-	    echo_test_string=`eval $prev`
-	    export echo_test_string
-	    exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-	  else
-	    # Oops.  We lost completely, so just stick with echo.
-	    ECHO=echo
-	  fi
-        fi
-      fi
-    fi
-  fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-lt_ECHO=$ECHO
-if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-   lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
-fi
-
-AC_SUBST(lt_ECHO)
-])
 _LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
-_LT_DECL([], [ECHO], [1],
-    [An echo program that does not interpret backslashes])
+_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
 ])# _LT_PROG_ECHO_BACKSLASH
 
 
+# _LT_WITH_SYSROOT
+# ----------------
+AC_DEFUN([_LT_WITH_SYSROOT],
+[AC_MSG_CHECKING([for sysroot])
+AC_ARG_WITH([sysroot],
+[  --with-sysroot[=DIR] Search for dependent libraries within DIR
+                        (or the compiler's sysroot if not specified).],
+[], [with_sysroot=no])
+
+dnl lt_sysroot will always be passed unquoted.  We quote it here
+dnl in case the user passed a directory name.
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+   if test "$GCC" = yes; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   AC_MSG_RESULT([${with_sysroot}])
+   AC_MSG_ERROR([The sysroot must be an absolute path.])
+   ;;
+esac
+
+ AC_MSG_RESULT([${lt_sysroot:-no}])
+_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
+[dependent libraries, and in which our libraries should be installed.])])
+
 # _LT_ENABLE_LOCK
 # ---------------
 m4_defun([_LT_ENABLE_LOCK],
@@ -1236,7 +1281,7 @@
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+  echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     if test "$lt_cv_prog_gnu_ld" = yes; then
       case `/usr/bin/file conftest.$ac_objext` in
@@ -1279,7 +1324,14 @@
 	    LD="${LD-ld} -m elf_i386_fbsd"
 	    ;;
 	  x86_64-*linux*)
-	    LD="${LD-ld} -m elf_i386"
+	    case `/usr/bin/file conftest.o` in
+	      *x86-64*)
+	         LD="${LD-ld} -m elf32_x86_64"
+	         ;;
+	      *)
+	         LD="${LD-ld} -m elf_i386"
+	         ;;
+	    esac
 	    ;;
 	  ppc64-*linux*|powerpc64-*linux*)
 	    LD="${LD-ld} -m elf32ppclinux"
@@ -1329,14 +1381,27 @@
     CFLAGS="$SAVE_CFLAGS"
   fi
   ;;
-sparc*-*solaris*)
+*-*solaris*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     case `/usr/bin/file conftest.o` in
     *64-bit*)
       case $lt_cv_prog_gnu_ld in
-      yes*) LD="${LD-ld} -m elf64_sparc" ;;
+      yes*)
+        case $host in
+        i?86-*-solaris*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        sparc*-*-solaris*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+        esac
+        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
+        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+          LD="${LD-ld}_sol2"
+        fi
+        ;;
       *)
 	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
 	  LD="${LD-ld} -64"
@@ -1354,14 +1419,47 @@
 ])# _LT_ENABLE_LOCK
 
 
+# _LT_PROG_AR
+# -----------
+m4_defun([_LT_PROG_AR],
+[AC_CHECK_TOOLS(AR, [ar], false)
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
+
+AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
+  [lt_cv_ar_at_file=no
+   AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
+     [echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
+      AC_TRY_EVAL([lt_ar_try])
+      if test "$ac_status" -eq 0; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	AC_TRY_EVAL([lt_ar_try])
+	if test "$ac_status" -ne 0; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+     ])
+  ])
+
+if test "x$lt_cv_ar_at_file" = xno; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
+_LT_DECL([], [archiver_list_spec], [1],
+  [How to feed a file listing to the archiver])
+])# _LT_PROG_AR
+
+
 # _LT_CMD_OLD_ARCHIVE
 # -------------------
 m4_defun([_LT_CMD_OLD_ARCHIVE],
-[AC_CHECK_TOOL(AR, ar, false)
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-_LT_DECL([], [AR], [1], [The archiver])
-_LT_DECL([], [AR_FLAGS], [1])
+[_LT_PROG_AR
 
 AC_CHECK_TOOL(STRIP, strip, :)
 test -z "$STRIP" && STRIP=:
@@ -1380,18 +1478,27 @@
 if test -n "$RANLIB"; then
   case $host_os in
   openbsd*)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
     ;;
   *)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
     ;;
   esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
 fi
+
+case $host_os in
+  darwin*)
+    lock_old_archive_extraction=yes ;;
+  *)
+    lock_old_archive_extraction=no ;;
+esac
 _LT_DECL([], [old_postinstall_cmds], [2])
 _LT_DECL([], [old_postuninstall_cmds], [2])
 _LT_TAGDECL([], [old_archive_cmds], [2],
     [Commands used to build an old-style archive])
+_LT_DECL([], [lock_old_archive_extraction], [0],
+    [Whether to use a lock for old archive extraction])
 ])# _LT_CMD_OLD_ARCHIVE
 
 
@@ -1416,15 +1523,15 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        $2=yes
@@ -1464,7 +1571,7 @@
      if test -s conftest.err; then
        # Append any errors to the config.log.
        cat conftest.err 1>&AS_MESSAGE_LOG_FD
-       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
        $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
        if diff conftest.exp conftest.er2 >/dev/null; then
          $2=yes
@@ -1527,6 +1634,11 @@
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
+  mint*)
+    # On MiNT this can take a long time and run out of memory.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
   amigaos*)
     # On AmigaOS with pdksh, this test takes hours, literally.
     # So we just punt and use a minimum line length of 8192.
@@ -1552,6 +1664,11 @@
     lt_cv_sys_max_cmd_len=196608
     ;;
 
+  os2*)
+    # The test takes a long time on OS/2.
+    lt_cv_sys_max_cmd_len=8192
+    ;;
+
   osf*)
     # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
     # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
@@ -1578,7 +1695,8 @@
     ;;
   *)
     lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-    if test -n "$lt_cv_sys_max_cmd_len"; then
+    if test -n "$lt_cv_sys_max_cmd_len" && \
+      test undefined != "$lt_cv_sys_max_cmd_len"; then
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
     else
@@ -1591,8 +1709,8 @@
       # If test is not a shell built-in, we'll probably end up computing a
       # maximum length that is only half of the actual maximum length, but
       # we can't tell.
-      while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
-	         = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
 	      test $i != 17 # 1/2 MB should be enough
       do
         i=`expr $i + 1`
@@ -1643,7 +1761,7 @@
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-[#line __oline__ "configure"
+[#line $LINENO "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -1684,7 +1802,13 @@
 #  endif
 #endif
 
-void fnord() { int i=42;}
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
 int main ()
 {
   void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
@@ -1693,7 +1817,11 @@
   if (self)
     {
       if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
       /* dlclose (self); */
     }
   else
@@ -1869,16 +1997,16 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
@@ -2037,6 +2165,7 @@
 m4_require([_LT_FILEUTILS_DEFAULTS])dnl
 m4_require([_LT_DECL_OBJDUMP])dnl
 m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
 AC_MSG_CHECKING([dynamic linker characteristics])
 m4_if([$1],
 	[], [
@@ -2045,16 +2174,23 @@
     darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
     *) lt_awk_arg="/^libraries:/" ;;
   esac
-  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+  case $host_os in
+    mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
+    *) lt_sed_strip_eq="s,=/,/,g" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+  case $lt_search_path_spec in
+  *\;*)
     # if the path contains ";" then we assume it to be the separator
     # otherwise default to the standard path separator (i.e. ":") - it is
     # assumed that no part of a normal pathname contains ";" but that should
     # okay in the real world where ";" in dirpaths is itself problematic.
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
-  else
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-  fi
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+    ;;
+  *)
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+    ;;
+  esac
   # Ok, now we have the path, separated by spaces, we can step through it
   # and add multilib dir if necessary.
   lt_tmp_lt_search_path_spec=
@@ -2067,7 +2203,7 @@
 	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
     fi
   done
-  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
 BEGIN {RS=" "; FS="/|\n";} {
   lt_foo="";
   lt_count=0;
@@ -2087,7 +2223,13 @@
   if (lt_foo != "") { lt_freq[[lt_foo]]++; }
   if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
 }'`
-  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+  # AWK program above erroneously prepends '/' to C:/dos/paths
+  # for these hosts.
+  case $host_os in
+    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+      $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
+  esac
+  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
 else
   sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
 fi])
@@ -2113,7 +2255,7 @@
 
 case $host_os in
 aix3*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
   shlibpath_var=LIBPATH
 
@@ -2122,7 +2264,7 @@
   ;;
 
 aix[[4-9]]*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   hardcode_into_libs=yes
@@ -2175,7 +2317,7 @@
   m68k)
     library_names_spec='$libname.ixlibrary $libname.a'
     # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
     ;;
   esac
   ;;
@@ -2187,7 +2329,7 @@
   ;;
 
 bsdi[[45]]*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
@@ -2206,8 +2348,9 @@
   need_version=no
   need_lib_prefix=no
 
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
     library_names_spec='$libname.dll.a'
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
     postinstall_cmds='base_file=`basename \${file}`~
@@ -2228,36 +2371,83 @@
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
       soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+m4_if([$1], [],[
+      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
       ;;
     mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
       soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
       library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
       ;;
     esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
     ;;
 
   *)
+    # Assume MSVC wrapper
     library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
     ;;
   esac
-  dynamic_linker='Win32 ld.exe'
   # FIXME: first we should search . and the directory the executable is in
   shlibpath_var=PATH
   ;;
@@ -2278,7 +2468,7 @@
   ;;
 
 dgux*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
@@ -2286,10 +2476,6 @@
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
 freebsd* | dragonfly*)
   # DragonFly does not have aout.  When/if they implement a new
   # versioning mechanism, adjust this.
@@ -2297,7 +2483,7 @@
     objformat=`/usr/bin/objformat`
   else
     case $host_os in
-    freebsd[[123]]*) objformat=aout ;;
+    freebsd[[23]].*) objformat=aout ;;
     *) objformat=elf ;;
     esac
   fi
@@ -2315,7 +2501,7 @@
   esac
   shlibpath_var=LD_LIBRARY_PATH
   case $host_os in
-  freebsd2*)
+  freebsd2.*)
     shlibpath_overrides_runpath=yes
     ;;
   freebsd3.[[01]]* | freebsdelf3.[[01]]*)
@@ -2335,12 +2521,26 @@
   ;;
 
 gnu*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
   hardcode_into_libs=yes
   ;;
 
@@ -2386,12 +2586,14 @@
     soname_spec='${libname}${release}${shared_ext}$major'
     ;;
   esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
   postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
   ;;
 
 interix[[3-9]]*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
@@ -2407,7 +2609,7 @@
     nonstopux*) version_type=nonstopux ;;
     *)
 	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux
+		version_type=linux # correct to gnu/linux during the next big refactor
 	else
 		version_type=irix
 	fi ;;
@@ -2444,9 +2646,9 @@
   dynamic_linker=no
   ;;
 
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
-  version_type=linux
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -2454,16 +2656,21 @@
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
+
   # Some binutils ld are patched to set DT_RUNPATH
-  save_LDFLAGS=$LDFLAGS
-  save_libdir=$libdir
-  eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
-       LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
-  AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
-    [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
-       [shlibpath_overrides_runpath=yes])])
-  LDFLAGS=$save_LDFLAGS
-  libdir=$save_libdir
+  AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
+    [lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+	 LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+    AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+      [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+	 [lt_cv_shlibpath_overrides_runpath=yes])])
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+    ])
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
 
   # This implies no fast_install, which is unacceptable.
   # Some rework will be needed to allow for fast_install
@@ -2475,8 +2682,9 @@
 
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
     sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
+
   fi
 
   # We used to test for /lib/ld.so.1 and disable shared libraries on
@@ -2507,7 +2715,7 @@
   ;;
 
 newsos6)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
@@ -2576,7 +2784,7 @@
   ;;
 
 solaris*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -2601,7 +2809,7 @@
   ;;
 
 sysv4 | sysv4.3*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
@@ -2625,7 +2833,7 @@
 
 sysv4*MP*)
   if test -d /usr/nec ;then
-    version_type=linux
+    version_type=linux # correct to gnu/linux during the next big refactor
     library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
     soname_spec='$libname${shared_ext}.$major'
     shlibpath_var=LD_LIBRARY_PATH
@@ -2656,7 +2864,7 @@
 
 tpf*)
   # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -2666,7 +2874,7 @@
   ;;
 
 uts4*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
@@ -2708,6 +2916,8 @@
     The last name is the one that the linker finds with -lNAME]])
 _LT_DECL([], [soname_spec], [1],
     [[The coded name of the library, if different from the real name]])
+_LT_DECL([], [install_override_mode], [1],
+    [Permission mode override for installation of shared libraries])
 _LT_DECL([], [postinstall_cmds], [2],
     [Command to use after installation of a shared archive])
 _LT_DECL([], [postuninstall_cmds], [2],
@@ -2820,6 +3030,7 @@
 AC_REQUIRE([AC_CANONICAL_BUILD])dnl
 m4_require([_LT_DECL_SED])dnl
 m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
 
 AC_ARG_WITH([gnu-ld],
     [AS_HELP_STRING([--with-gnu-ld],
@@ -2941,6 +3152,11 @@
 esac
 reload_cmds='$LD$reload_flag -o $output$reload_objs'
 case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test "$GCC" != yes; then
+      reload_cmds=false
+    fi
+    ;;
   darwin*)
     if test "$GCC" = yes; then
       reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
@@ -2949,8 +3165,8 @@
     fi
     ;;
 esac
-_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
-_LT_DECL([], [reload_cmds], [2])dnl
+_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_TAGDECL([], [reload_cmds], [2])dnl
 ])# _LT_CMD_RELOAD
 
 
@@ -3002,16 +3218,18 @@
   # Base MSYS/MinGW do not provide the 'file' command needed by
   # func_win32_libid shell function, so use a weaker test based on 'objdump',
   # unless we find 'file', for example because we are cross-compiling.
-  if ( file / ) >/dev/null 2>&1; then
+  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
     lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
     lt_cv_file_magic_cmd='func_win32_libid'
   else
-    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
     lt_cv_file_magic_cmd='$OBJDUMP -f'
   fi
   ;;
 
-cegcc)
+cegcc*)
   # use the weaker test based on 'objdump'. See mingw*.
   lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
   lt_cv_file_magic_cmd='$OBJDUMP -f'
@@ -3041,6 +3259,10 @@
   lt_cv_deplibs_check_method=pass_all
   ;;
 
+haiku*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
 hpux10.20* | hpux11*)
   lt_cv_file_magic_cmd=/usr/bin/file
   case $host_cpu in
@@ -3049,11 +3271,11 @@
     lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
     ;;
   hppa*64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
+    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
     lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
     ;;
   *)
-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
     lt_cv_file_magic_test_file=/usr/lib/libc.sl
     ;;
   esac
@@ -3074,8 +3296,8 @@
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
@@ -3153,6 +3375,21 @@
   ;;
 esac
 ])
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
 file_magic_cmd=$lt_cv_file_magic_cmd
 deplibs_check_method=$lt_cv_deplibs_check_method
 test -z "$deplibs_check_method" && deplibs_check_method=unknown
@@ -3160,7 +3397,11 @@
 _LT_DECL([], [deplibs_check_method], [1],
     [Method to check whether dependent libraries are shared objects])
 _LT_DECL([], [file_magic_cmd], [1],
-    [Command to use when deplibs_check_method == "file_magic"])
+    [Command to use when deplibs_check_method = "file_magic"])
+_LT_DECL([], [file_magic_glob], [1],
+    [How to find potential files when deplibs_check_method = "file_magic"])
+_LT_DECL([], [want_nocaseglob], [1],
+    [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
 ])# _LT_CHECK_MAGIC_METHOD
 
 
@@ -3217,7 +3458,19 @@
   NM="$lt_cv_path_NM"
 else
   # Didn't find any BSD compatible name lister, look for dumpbin.
-  AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
+  if test -n "$DUMPBIN"; then :
+    # Let the user override the test.
+  else
+    AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
+    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    *COFF*)
+      DUMPBIN="$DUMPBIN -symbols"
+      ;;
+    *)
+      DUMPBIN=:
+      ;;
+    esac
+  fi
   AC_SUBST([DUMPBIN])
   if test "$DUMPBIN" != ":"; then
     NM="$DUMPBIN"
@@ -3230,13 +3483,13 @@
 AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
   [lt_cv_nm_interface="BSD nm"
   echo "int some_variable = 0;" > conftest.$ac_ext
-  (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
   (eval "$ac_compile" 2>conftest.err)
   cat conftest.err >&AS_MESSAGE_LOG_FD
-  (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
   (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
   cat conftest.err >&AS_MESSAGE_LOG_FD
-  (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
+  (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
   cat conftest.out >&AS_MESSAGE_LOG_FD
   if $GREP 'External.*some_variable' conftest.out > /dev/null; then
     lt_cv_nm_interface="MS dumpbin"
@@ -3251,6 +3504,67 @@
 dnl AC_DEFUN([AM_PROG_NM], [])
 dnl AC_DEFUN([AC_PROG_NM], [])
 
+# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+# --------------------------------
+# how to determine the name of the shared library
+# associated with a specific link library.
+#  -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+m4_require([_LT_DECL_DLLTOOL])
+AC_CACHE_CHECK([how to associate runtime and link libraries],
+lt_cv_sharedlib_from_linklib_cmd,
+[lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh
+  # decide which to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  ;;
+esac
+])
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
+    [Command to associate shared and link libraries])
+])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+
+
+# _LT_PATH_MANIFEST_TOOL
+# ----------------------
+# locate the manifest tool
+m4_defun([_LT_PATH_MANIFEST_TOOL],
+[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
+  [lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*])
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+  MANIFEST_TOOL=:
+fi
+_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
+])# _LT_PATH_MANIFEST_TOOL
+
 
 # LT_LIB_M
 # --------
@@ -3259,7 +3573,7 @@
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 LIBM=
 case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
   # These system don't have libm, or don't need it
   ;;
 *-ncr-sysv4.3*)
@@ -3287,7 +3601,12 @@
 _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
 
 if test "$GCC" = yes; then
-  _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+  case $cc_basename in
+  nvcc*)
+    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
+  *)
+    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
+  esac
 
   _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
     lt_cv_prog_compiler_rtti_exceptions,
@@ -3304,6 +3623,7 @@
 m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_AWK])dnl
 AC_REQUIRE([LT_PATH_NM])dnl
 AC_REQUIRE([LT_PATH_LD])dnl
 m4_require([_LT_DECL_SED])dnl
@@ -3371,8 +3691,8 @@
 lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
 
 # Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
 
 # Handle CRLF in mingw tool chain
 opt_cr=
@@ -3396,6 +3716,7 @@
     # which start with @ or ?.
     lt_cv_sys_global_symbol_pipe="$AWK ['"\
 "     {last_section=section; section=\$ 3};"\
+"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
 "     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
 "     \$ 0!~/External *\|/{next};"\
 "     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
@@ -3408,6 +3729,7 @@
   else
     lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[	 ]]\($symcode$symcode*\)[[	 ]][[	 ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
   fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
 
   # Check to see that the pipe works correctly.
   pipe_works=no
@@ -3429,7 +3751,7 @@
   if AC_TRY_EVAL(ac_compile); then
     # Now try to grab the symbols.
     nlist=conftest.nm
-    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
+    if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
       # Try sorting and uniquifying the output.
       if sort "$nlist" | uniq > "$nlist"T; then
 	mv -f "$nlist"T "$nlist"
@@ -3441,6 +3763,18 @@
       if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
 	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
 	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT@&t@_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT@&t@_DLSYM_CONST
+#else
+# define LT@&t@_DLSYM_CONST const
+#endif
+
 #ifdef __cplusplus
 extern "C" {
 #endif
@@ -3452,7 +3786,7 @@
 	  cat <<_LT_EOF >> conftest.$ac_ext
 
 /* The mapping between symbol names and symbols.  */
-const struct {
+LT@&t@_DLSYM_CONST struct {
   const char *name;
   void       *address;
 }
@@ -3478,15 +3812,15 @@
 _LT_EOF
 	  # Now try linking the two files.
 	  mv conftest.$ac_objext conftstm.$ac_objext
-	  lt_save_LIBS="$LIBS"
-	  lt_save_CFLAGS="$CFLAGS"
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
 	  LIBS="conftstm.$ac_objext"
 	  CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
 	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
 	    pipe_works=yes
 	  fi
-	  LIBS="$lt_save_LIBS"
-	  CFLAGS="$lt_save_CFLAGS"
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
 	else
 	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
 	fi
@@ -3519,6 +3853,13 @@
   AC_MSG_RESULT(ok)
 fi
 
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
+
 _LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
     [Take the output of nm and produce a listing of raw symbols and C names])
 _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
@@ -3529,6 +3870,8 @@
 _LT_DECL([global_symbol_to_c_name_address_lib_prefix],
     [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
     [Transform the output of nm in a C name address pair when lib prefix is needed])
+_LT_DECL([], [nm_file_list_spec], [1],
+    [Specify filename containing input files for $NM])
 ]) # _LT_CMD_GLOBAL_SYMBOLS
 
 
@@ -3540,7 +3883,6 @@
 _LT_TAGVAR(lt_prog_compiler_pic, $1)=
 _LT_TAGVAR(lt_prog_compiler_static, $1)=
 
-AC_MSG_CHECKING([for $compiler option to produce PIC])
 m4_if([$1], [CXX], [
   # C++ specific cases for pic, static, wl, etc.
   if test "$GXX" = yes; then
@@ -3591,6 +3933,11 @@
       # DJGPP does not support shared libraries at all
       _LT_TAGVAR(lt_prog_compiler_pic, $1)=
       ;;
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)=
+      ;;
     interix[[3-9]]*)
       # Interix 3.x gcc -fpic/-fPIC options generate broken code.
       # Instead, we relocate shared libraries at runtime.
@@ -3640,6 +3987,12 @@
 	  ;;
 	esac
 	;;
+      mingw* | cygwin* | os2* | pw32* | cegcc*)
+	# This hack is so that the source file can tell whether it is being
+	# built for inclusion in a dll (and should export symbols for example).
+	m4_if([$1], [GCJ], [],
+	  [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+	;;
       dgux*)
 	case $cc_basename in
 	  ec++*)
@@ -3696,7 +4049,7 @@
 	    ;;
 	esac
 	;;
-      linux* | k*bsd*-gnu)
+      linux* | k*bsd*-gnu | kopensolaris*-gnu)
 	case $cc_basename in
 	  KCC*)
 	    # KAI C++ Compiler
@@ -3729,8 +4082,8 @@
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
 	    ;;
-	  xlc* | xlC*)
-	    # IBM XL 8.0 on PPC
+	  xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
+	    # IBM XL 8.0, 9.0 on PPC and BlueGene
 	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
@@ -3792,7 +4145,7 @@
 	;;
       solaris*)
 	case $cc_basename in
-	  CC*)
+	  CC* | sunCC*)
 	    # Sun C++ 4.2, 5.x and Centerline C++
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
@@ -3896,6 +4249,12 @@
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
       ;;
 
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)=
+      ;;
+
     hpux*)
       # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
       # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
@@ -3938,6 +4297,15 @@
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
       ;;
     esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
+      if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+        _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
+      fi
+      ;;
+    esac
   else
     # PORTME Check for flag to pass linker flags through the system compiler.
     case $host_os in
@@ -3980,7 +4348,7 @@
       _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
       ;;
 
-    linux* | k*bsd*-gnu)
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
       case $cc_basename in
       # old Intel for x86_64 which still supported -KPIC.
       ecc*)
@@ -4001,7 +4369,13 @@
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
 	;;
-      pgcc* | pgf77* | pgf90* | pgf95*)
+      nagfor*)
+	# NAG Fortran compiler
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
         # Portland Group compilers (*not* the Pentium gcc compiler,
 	# which looks to be a dead project)
 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
@@ -4013,25 +4387,40 @@
         # All Alpha code is PIC.
         _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
         ;;
-      xl*)
-	# IBM XL C 8.0/Fortran 10.1 on PPC
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
 	;;
       *)
 	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	  ;;
 	*Sun\ C*)
 	  # Sun C 5.9
 	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	  ;;
-	*Sun\ F*)
-	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+        *Intel*\ [[CF]]*Compiler*)
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	  ;;
+	*Portland\ Group*)
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
 	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
 	  ;;
 	esac
 	;;
@@ -4063,7 +4452,7 @@
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
       _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       case $cc_basename in
-      f77* | f90* | f95*)
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
       *)
 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
@@ -4120,9 +4509,11 @@
     _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
     ;;
 esac
-AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
-_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
-	[How to pass a linker flag through the compiler])
+
+AC_CACHE_CHECK([for $compiler option to produce PIC],
+  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
+  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
 
 #
 # Check to make sure the PIC flag actually works.
@@ -4141,6 +4532,8 @@
 _LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
 	[Additional compiler flags for building library objects])
 
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+	[How to pass a linker flag through the compiler])
 #
 # Check to make sure the static flag actually works.
 #
@@ -4161,6 +4554,7 @@
 m4_defun([_LT_LINKER_SHLIBS],
 [AC_REQUIRE([LT_PATH_LD])dnl
 AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
 m4_require([_LT_FILEUTILS_DEFAULTS])dnl
 m4_require([_LT_DECL_EGREP])dnl
 m4_require([_LT_DECL_SED])dnl
@@ -4169,27 +4563,37 @@
 AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
 m4_if([$1], [CXX], [
   _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
   case $host_os in
   aix[[4-9]]*)
     # If we're using GNU nm, then we don't want the "-C" option.
     # -C means demangle to AIX nm, but means don't demangle with GNU nm
+    # Also, AIX nm treats weak defined symbols like other global defined
+    # symbols, whereas GNU nm marks them as "W".
     if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
     else
       _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
     fi
     ;;
   pw32*)
     _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-  ;;
+    ;;
   cygwin* | mingw* | cegcc*)
-    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
-  ;;
+    case $cc_basename in
+    cl*)
+      _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+      ;;
+    *)
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+      ;;
+    esac
+    ;;
   *)
     _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  ;;
+    ;;
   esac
-  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
 ], [
   runpath_var=
   _LT_TAGVAR(allow_undefined_flag, $1)=
@@ -4204,7 +4608,6 @@
   _LT_TAGVAR(hardcode_direct, $1)=no
   _LT_TAGVAR(hardcode_direct_absolute, $1)=no
   _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-  _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
   _LT_TAGVAR(hardcode_libdir_separator, $1)=
   _LT_TAGVAR(hardcode_minus_L, $1)=no
   _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
@@ -4252,7 +4655,33 @@
   esac
 
   _LT_TAGVAR(ld_shlibs, $1)=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
   if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
+	  *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
     # If archive_cmds runs LD, not CC, wlarc should be empty
     wlarc='${wl}'
 
@@ -4270,6 +4699,7 @@
     fi
     supports_anon_versioning=no
     case `$LD -v 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
       *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
       *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
       *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
@@ -4285,11 +4715,12 @@
 	_LT_TAGVAR(ld_shlibs, $1)=no
 	cat <<_LT_EOF 1>&2
 
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** Warning: the GNU linker, at least up to release 2.19, is reported
 *** to be unable to reliably create shared libraries on AIX.
 *** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
 
 _LT_EOF
       fi
@@ -4325,10 +4756,12 @@
       # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
       # as there is no search path for DLLs.
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
       _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
       _LT_TAGVAR(always_export_symbols, $1)=no
       _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
 
       if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
         _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
@@ -4346,6 +4779,11 @@
       fi
       ;;
 
+    haiku*)
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
     interix[[3-9]]*)
       _LT_TAGVAR(hardcode_direct, $1)=no
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
@@ -4361,7 +4799,7 @@
       _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
-    gnu* | linux* | tpf* | k*bsd*-gnu)
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
       tmp_diet=no
       if test "$host_os" = linux-dietlibc; then
 	case $cc_basename in
@@ -4371,15 +4809,16 @@
       if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
 	 && test "$tmp_diet" = no
       then
-	tmp_addflag=
+	tmp_addflag=' $pic_flag'
 	tmp_sharedflag='-shared'
 	case $cc_basename,$host_cpu in
         pgcc*)				# Portland Group C compiler
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag'
 	  ;;
-	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag -Mnomain' ;;
 	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
 	  tmp_addflag=' -i_dynamic' ;;
@@ -4390,13 +4829,17 @@
 	lf95*)				# Lahey Fortran 8.1
 	  _LT_TAGVAR(whole_archive_flag_spec, $1)=
 	  tmp_sharedflag='--shared' ;;
-	xl[[cC]]*)			# IBM XL C 8.0 on PPC (deal with xlf below)
+	xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
 	  tmp_sharedflag='-qmkshrobj'
 	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(compiler_needs_object, $1)=yes
+	  ;;
 	esac
 	case `$CC -V 2>&1 | sed 5q` in
 	*Sun\ C*)			# Sun C 5.9
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
 	  _LT_TAGVAR(compiler_needs_object, $1)=yes
 	  tmp_sharedflag='-G' ;;
 	*Sun\ F*)			# Sun Fortran 8.3
@@ -4412,17 +4855,16 @@
         fi
 
 	case $cc_basename in
-	xlf*)
+	xlf* | bgf* | bgxlf* | mpixlf*)
 	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
 	  _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-	  _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
 	  if test "x$supports_anon_versioning" = xyes; then
 	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
 	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
 	      echo "local: *; };" >> $output_objdir/$libname.ver~
-	      $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
 	  fi
 	  ;;
 	esac
@@ -4436,8 +4878,8 @@
 	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
       else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       fi
       ;;
 
@@ -4455,8 +4897,8 @@
 
 _LT_EOF
       elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       else
 	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
@@ -4502,8 +4944,8 @@
 
     *)
       if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       else
 	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
@@ -4543,8 +4985,10 @@
       else
 	# If we're using GNU nm, then we don't want the "-C" option.
 	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
 	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	else
 	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	fi
@@ -4631,9 +5075,9 @@
 	_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
         # Determine the default libpath from the value encoded in an
         # empty executable.
-        _LT_SYS_MODULE_PATH_AIX
+        _LT_SYS_MODULE_PATH_AIX([$1])
         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
       else
 	if test "$host_cpu" = ia64; then
 	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
@@ -4642,14 +5086,19 @@
 	else
 	 # Determine the default libpath from the value encoded in an
 	 # empty executable.
-	 _LT_SYS_MODULE_PATH_AIX
+	 _LT_SYS_MODULE_PATH_AIX([$1])
 	 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
 	  # Warning - without using the other run time loading flags,
 	  # -berok will link without error, but may produce a broken library.
 	  _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
 	  _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	  # Exported symbols can be pulled into shared objects from archives
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	  fi
 	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
 	  # This is similar to how AIX traditionally builds its shared libraries.
 	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
@@ -4681,20 +5130,64 @@
       # Microsoft Visual C++.
       # hardcode_libdir_flag_spec is actually meaningless, as there is
       # no search path for DLLs.
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
-      # FIXME: Setting linknames here is a bad hack.
-      _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
-      # FIXME: Should let the user specify the lib program.
-      _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
-      _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
-      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	_LT_TAGVAR(always_export_symbols, $1)=yes
+	_LT_TAGVAR(file_list_spec, $1)='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	_LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+	_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	_LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+	# FIXME: Should let the user specify the lib program.
+	_LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	;;
+      esac
       ;;
 
     darwin* | rhapsody*)
@@ -4707,10 +5200,6 @@
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
-    freebsd1*)
-      _LT_TAGVAR(ld_shlibs, $1)=no
-      ;;
-
     # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
     # support.  Future versions do this automatically, but an explicit c++rt0.o
     # does not break anything, and helps significantly (at the cost of a little
@@ -4723,7 +5212,7 @@
       ;;
 
     # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
+    freebsd2.*)
       _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
       _LT_TAGVAR(hardcode_direct, $1)=yes
       _LT_TAGVAR(hardcode_minus_L, $1)=yes
@@ -4732,7 +5221,7 @@
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
     freebsd* | dragonfly*)
-      _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
       _LT_TAGVAR(hardcode_direct, $1)=yes
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
@@ -4740,7 +5229,7 @@
 
     hpux9*)
       if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       else
 	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       fi
@@ -4755,14 +5244,13 @@
       ;;
 
     hpux10*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
       else
 	_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
       fi
       if test "$with_gnu_ld" = no; then
 	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
 	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
 	_LT_TAGVAR(hardcode_direct, $1)=yes
 	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
@@ -4774,16 +5262,16 @@
       ;;
 
     hpux11*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
 	case $host_cpu in
 	hppa*64*)
 	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       else
@@ -4795,7 +5283,14 @@
 	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	m4_if($1, [], [
+	  # Older versions of the 11.00 compiler do not understand -b yet
+	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+	  _LT_LINKER_OPTION([if $CC understands -b],
+	    _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
+	    [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
+	    [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
+	  [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
 	  ;;
 	esac
       fi
@@ -4823,19 +5318,34 @@
 
     irix5* | irix6* | nonstopux*)
       if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	# Try to use the -exported_symbol ld option, if it does not
 	# work, assume that -exports_file does not work either and
 	# implicitly export all symbols.
-        save_LDFLAGS="$LDFLAGS"
-        LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-        AC_LINK_IFELSE(int foo(void) {},
-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
-        )
-        LDFLAGS="$save_LDFLAGS"
+	# This should be the same for all languages, so no per-tag cache variable.
+	AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
+	  [lt_cv_irix_exported_symbol],
+	  [save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   AC_LINK_IFELSE(
+	     [AC_LANG_SOURCE(
+	        [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
+			      [C++], [[int foo (void) { return 0; }]],
+			      [Fortran 77], [[
+      subroutine foo
+      end]],
+			      [Fortran], [[
+      subroutine foo
+      end]])])],
+	      [lt_cv_irix_exported_symbol=yes],
+	      [lt_cv_irix_exported_symbol=no])
+           LDFLAGS="$save_LDFLAGS"])
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
       else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
       fi
       _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
@@ -4897,17 +5407,17 @@
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
       _LT_TAGVAR(hardcode_minus_L, $1)=yes
       _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
       _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
       ;;
 
     osf3*)
       if test "$GCC" = yes; then
 	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
       else
 	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
       fi
       _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
@@ -4917,13 +5427,13 @@
     osf4* | osf5*)	# as osf3* with the addition of -msym flag
       if test "$GCC" = yes; then
 	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
       else
 	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
 	_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
-	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
 	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
@@ -4936,9 +5446,9 @@
       _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
       if test "$GCC" = yes; then
 	wlarc='${wl}'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
       else
 	case `$CC -V 2>&1` in
 	*"Compilers 5.0"*)
@@ -5114,36 +5624,38 @@
       # Test whether the compiler implicitly links with -lc since on some
       # systems, -lgcc has to come before -lc. If gcc already passes -lc
       # to ld, don't add -lc before -lgcc.
-      AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-      $RM conftest*
-      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+      AC_CACHE_CHECK([whether -lc should be explicitly linked in],
+	[lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
+	[$RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-      if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
-	pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
-        _LT_TAGVAR(allow_undefined_flag, $1)=
-        if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
-        then
-	  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-        else
-	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-        fi
-        _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $RM conftest*
-      AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
+	if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+	  pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+	  _LT_TAGVAR(allow_undefined_flag, $1)=
+	  if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+	  then
+	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	  else
+	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  fi
+	  _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+	])
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
       ;;
     esac
   fi
@@ -5180,9 +5692,6 @@
 _LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
     [Flag to hardcode $libdir into a binary during linking.
     This must work even if $libdir does not exist])
-_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1],
-    [[If ld is used when linking, flag to hardcode $libdir into a binary
-    during linking.  This must work even if $libdir does not exist]])
 _LT_TAGDECL([], [hardcode_libdir_separator], [1],
     [Whether we need a single "-rpath" flag with a separated argument])
 _LT_TAGDECL([], [hardcode_direct], [0],
@@ -5208,8 +5717,6 @@
     to runtime path list])
 _LT_TAGDECL([], [link_all_deplibs], [0],
     [Whether libtool must link a program against all its dependency libraries])
-_LT_TAGDECL([], [fix_srcfile_path], [1],
-    [Fix the shell variable $srcfile for the compiler])
 _LT_TAGDECL([], [always_export_symbols], [0],
     [Set to "yes" if exported symbols are required])
 _LT_TAGDECL([], [export_symbols_cmds], [2],
@@ -5220,6 +5727,8 @@
     [Symbols that must always be exported])
 _LT_TAGDECL([], [prelink_cmds], [2],
     [Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [postlink_cmds], [2],
+    [Commands necessary for finishing linking programs])
 _LT_TAGDECL([], [file_list_spec], [1],
     [Specify filename containing input files])
 dnl FIXME: Not yet implemented
@@ -5313,14 +5822,15 @@
 ])# _LT_LANG_C_CONFIG
 
 
-# _LT_PROG_CXX
-# ------------
-# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
-# compiler, we have our own version here.
-m4_defun([_LT_PROG_CXX],
-[
-pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
-AC_PROG_CXX
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
 if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
     ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
     (test "X$CXX" != "Xg++"))) ; then
@@ -5328,22 +5838,6 @@
 else
   _lt_caught_CXX_error=yes
 fi
-popdef([AC_MSG_ERROR])
-])# _LT_PROG_CXX
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([_LT_PROG_CXX], [])
-
-
-# _LT_LANG_CXX_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for a C++ compiler are suitably
-# defined.  These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_CXX_CONFIG],
-[AC_REQUIRE([_LT_PROG_CXX])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_EGREP])dnl
 
 AC_LANG_PUSH(C++)
 _LT_TAGVAR(archive_cmds_need_lc, $1)=no
@@ -5355,7 +5849,6 @@
 _LT_TAGVAR(hardcode_direct, $1)=no
 _LT_TAGVAR(hardcode_direct_absolute, $1)=no
 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
 _LT_TAGVAR(hardcode_libdir_separator, $1)=
 _LT_TAGVAR(hardcode_minus_L, $1)=no
 _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
@@ -5365,6 +5858,8 @@
 _LT_TAGVAR(module_expsym_cmds, $1)=
 _LT_TAGVAR(link_all_deplibs, $1)=unknown
 _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
 _LT_TAGVAR(no_undefined_flag, $1)=
 _LT_TAGVAR(whole_archive_flag_spec, $1)=
 _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
@@ -5396,6 +5891,7 @@
 
   # Allow CC to be a program name with arguments.
   lt_save_CC=$CC
+  lt_save_CFLAGS=$CFLAGS
   lt_save_LD=$LD
   lt_save_GCC=$GCC
   GCC=$GXX
@@ -5413,6 +5909,7 @@
   fi
   test -z "${LDCXX+set}" || LD=$LDCXX
   CC=${CXX-"c++"}
+  CFLAGS=$CXXFLAGS
   compiler=$CC
   _LT_TAGVAR(compiler, $1)=$CC
   _LT_CC_BASENAME([$compiler])
@@ -5434,8 +5931,8 @@
       # Check if GNU C++ uses GNU ld as the underlying linker, since the
       # archiving commands below assume that GNU ld is being used.
       if test "$with_gnu_ld" = yes; then
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+        _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 
         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
         _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
@@ -5467,7 +5964,7 @@
       # Commands to make compiler produce verbose output that lists
       # what "hidden" libraries, object files and flags are used when
       # linking a shared library.
-      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 
     else
       GXX=no
@@ -5576,10 +6073,10 @@
           _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
           # Determine the default libpath from the value encoded in an empty
           # executable.
-          _LT_SYS_MODULE_PATH_AIX
+          _LT_SYS_MODULE_PATH_AIX([$1])
           _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
 
-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
         else
           if test "$host_cpu" = ia64; then
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
@@ -5588,14 +6085,19 @@
           else
 	    # Determine the default libpath from the value encoded in an
 	    # empty executable.
-	    _LT_SYS_MODULE_PATH_AIX
+	    _LT_SYS_MODULE_PATH_AIX([$1])
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
 	    # Warning - without using the other run time loading flags,
 	    # -berok will link without error, but may produce a broken library.
 	    _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
 	    _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	    # Exported symbols can be pulled into shared objects from archives
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	    if test "$with_gnu_ld" = yes; then
+	      # We only use this code for GNU lds that support --whole-archive.
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    else
+	      # Exported symbols can be pulled into shared objects from archives
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	    fi
 	    _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
 	    # This is similar to how AIX traditionally builds its shared
 	    # libraries.
@@ -5625,28 +6127,75 @@
         ;;
 
       cygwin* | mingw* | pw32* | cegcc*)
-        # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-        # as there is no search path for DLLs.
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-        _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-        _LT_TAGVAR(always_export_symbols, $1)=no
-        _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	case $GXX,$cc_basename in
+	,cl* | no,cl*)
+	  # Native MSVC
+	  # hardcode_libdir_flag_spec is actually meaningless, as there is
+	  # no search path for DLLs.
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  _LT_TAGVAR(always_export_symbols, $1)=yes
+	  _LT_TAGVAR(file_list_spec, $1)='@'
+	  # Tell ltmain to make .lib files, not .a files.
+	  libext=lib
+	  # Tell ltmain to make .dll files, not .so files.
+	  shrext_cmds=".dll"
+	  # FIXME: Setting linknames here is a bad hack.
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	      $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	    else
+	      $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	    fi~
+	    $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	    linknames='
+	  # The linker will not automatically build a static lib if we build a DLL.
+	  # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	  # Don't use ranlib
+	  _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+	  _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+	    lt_tool_outputfile="@TOOL_OUTPUT@"~
+	    case $lt_outputfile in
+	      *.exe|*.EXE) ;;
+	      *)
+		lt_outputfile="$lt_outputfile.exe"
+		lt_tool_outputfile="$lt_tool_outputfile.exe"
+		;;
+	    esac~
+	    func_to_tool_file "$lt_outputfile"~
+	    if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	      $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	      $RM "$lt_outputfile.manifest";
+	    fi'
+	  ;;
+	*)
+	  # g++
+	  # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+	  # as there is no search path for DLLs.
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  _LT_TAGVAR(always_export_symbols, $1)=no
+	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
 
-        if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-          # If the export-symbols file already is a .def file (1st line
-          # is EXPORTS), use it as is; otherwise, prepend...
-          _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	    cp $export_symbols $output_objdir/$soname.def;
-          else
-	    echo EXPORTS > $output_objdir/$soname.def;
-	    cat $export_symbols >> $output_objdir/$soname.def;
-          fi~
-          $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-        else
-          _LT_TAGVAR(ld_shlibs, $1)=no
-        fi
-        ;;
+	  if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	    # If the export-symbols file already is a .def file (1st line
+	    # is EXPORTS), use it as is; otherwise, prepend...
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	      cp $export_symbols $output_objdir/$soname.def;
+	    else
+	      echo EXPORTS > $output_objdir/$soname.def;
+	      cat $export_symbols >> $output_objdir/$soname.def;
+	    fi~
+	    $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	  else
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	  fi
+	  ;;
+	esac
+	;;
       darwin* | rhapsody*)
         _LT_DARWIN_LINKER_FEATURES($1)
 	;;
@@ -5669,7 +6218,7 @@
         esac
         ;;
 
-      freebsd[[12]]*)
+      freebsd2.*)
         # C++ shared libraries reported to be fairly broken before
 	# switch to ELF
         _LT_TAGVAR(ld_shlibs, $1)=no
@@ -5688,6 +6237,11 @@
       gnu*)
         ;;
 
+      haiku*)
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_TAGVAR(link_all_deplibs, $1)=yes
+        ;;
+
       hpux9*)
         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
         _LT_TAGVAR(hardcode_libdir_separator, $1)=:
@@ -5712,11 +6266,11 @@
             # explicitly linking system object files so we need to strip them
             # from the output so that they don't get included in the library
             # dependencies.
-            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
             ;;
           *)
             if test "$GXX" = yes; then
-              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
             else
               # FIXME: insert proper C++ library support
               _LT_TAGVAR(ld_shlibs, $1)=no
@@ -5777,7 +6331,7 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 	    ;;
           *)
 	    if test "$GXX" = yes; then
@@ -5787,10 +6341,10 @@
 	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	            ;;
 	          ia64*)
-	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	            ;;
 	          *)
-	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	            ;;
 	        esac
 	      fi
@@ -5820,7 +6374,7 @@
         case $cc_basename in
           CC*)
 	    # SGI C++
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
 
 	    # Archives containing C++ object files must be created using
 	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
@@ -5831,9 +6385,9 @@
           *)
 	    if test "$GXX" = yes; then
 	      if test "$with_gnu_ld" = no; then
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	      else
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
 	      fi
 	    fi
 	    _LT_TAGVAR(link_all_deplibs, $1)=yes
@@ -5844,7 +6398,7 @@
         _LT_TAGVAR(inherit_rpath, $1)=yes
         ;;
 
-      linux* | k*bsd*-gnu)
+      linux* | k*bsd*-gnu | kopensolaris*-gnu)
         case $cc_basename in
           KCC*)
 	    # Kuck and Associates, Inc. (KAI) C++ Compiler
@@ -5862,7 +6416,7 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
 	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
@@ -5899,26 +6453,26 @@
           pgCC* | pgcpp*)
             # Portland Group C++ compiler
 	    case `$CC -V` in
-	    *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
+	    *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
 	      _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
 		rm -rf $tpldir~
 		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
-		compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
+		compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
 	      _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
 		rm -rf $tpldir~
 		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
-		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
+		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
 		$RANLIB $oldlib'
 	      _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
 		rm -rf $tpldir~
 		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
 	      _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
 		rm -rf $tpldir~
 		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
 	      ;;
-	    *) # Version 6 will use weak symbols
+	    *) # Version 6 and above use weak symbols
 	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
 	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
 	      ;;
@@ -5926,7 +6480,7 @@
 
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
 	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
             ;;
 	  cxx*)
 	    # Compaq C++
@@ -5945,9 +6499,9 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
 	    ;;
-	  xl*)
+	  xl* | mpixl* | bgxl*)
 	    # IBM XL 8.0 on PPC, with GNU ld
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
 	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
@@ -5967,13 +6521,13 @@
 	      _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
 	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
 	      _LT_TAGVAR(compiler_needs_object, $1)=yes
 
 	      # Not sure whether something based on
 	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
 	      # would be better.
-	      output_verbose_link_cmd='echo'
+	      output_verbose_link_cmd='func_echo_all'
 
 	      # Archives containing C++ object files must be created using
 	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
@@ -6042,7 +6596,7 @@
 	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
 	    _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
 	  fi
-	  output_verbose_link_cmd=echo
+	  output_verbose_link_cmd=func_echo_all
 	else
 	  _LT_TAGVAR(ld_shlibs, $1)=no
 	fi
@@ -6077,15 +6631,15 @@
 	    case $host in
 	      osf3*)
 	        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
 	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
 		;;
 	      *)
 	        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
 	        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
 	          echo "-hidden">> $lib.exp~
-	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
+	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
 	          $RM $lib.exp'
 	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
 		;;
@@ -6101,17 +6655,17 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 	    ;;
 	  *)
 	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
 	      _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
 	      case $host in
 	        osf3*)
-	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 		  ;;
 	        *)
-	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 		  ;;
 	      esac
 
@@ -6121,7 +6675,7 @@
 	      # Commands to make compiler produce verbose output that lists
 	      # what "hidden" libraries, object files and flags are used when
 	      # linking a shared library.
-	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 
 	    else
 	      # FIXME: insert proper C++ library support
@@ -6157,7 +6711,7 @@
 
       solaris*)
         case $cc_basename in
-          CC*)
+          CC* | sunCC*)
 	    # Sun C++ 4.2, 5.x and Centerline C++
             _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
 	    _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
@@ -6178,7 +6732,7 @@
 	    esac
 	    _LT_TAGVAR(link_all_deplibs, $1)=yes
 
-	    output_verbose_link_cmd='echo'
+	    output_verbose_link_cmd='func_echo_all'
 
 	    # Archives containing C++ object files must be created using
 	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
@@ -6198,14 +6752,14 @@
 	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
 	      _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
 	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
 	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-		  $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+		  $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 
 	        # Commands to make compiler produce verbose output that lists
 	        # what "hidden" libraries, object files and flags are used when
 	        # linking a shared library.
-	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 	      else
 	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
 	        # platform.
@@ -6216,7 +6770,7 @@
 	        # Commands to make compiler produce verbose output that lists
 	        # what "hidden" libraries, object files and flags are used when
 	        # linking a shared library.
-	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 	      fi
 
 	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
@@ -6270,6 +6824,10 @@
           CC*)
 	    _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
+	      '"$_LT_TAGVAR(old_archive_cmds, $1)"
+	    _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
+	      '"$_LT_TAGVAR(reload_cmds, $1)"
 	    ;;
 	  *)
 	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
@@ -6325,6 +6883,7 @@
   fi # test -n "$compiler"
 
   CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
   LDCXX=$LD
   LD=$lt_save_LD
   GCC=$lt_save_GCC
@@ -6339,6 +6898,29 @@
 ])# _LT_LANG_CXX_CONFIG
 
 
+# _LT_FUNC_STRIPNAME_CNF
+# ----------------------
+# func_stripname_cnf prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+#
+# This function is identical to the (non-XSI) version of func_stripname,
+# except this one can be used by m4 code that may be executed by configure,
+# rather than the libtool script.
+m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
+AC_REQUIRE([_LT_DECL_SED])
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
+func_stripname_cnf ()
+{
+  case ${2} in
+  .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+  *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+  esac
+} # func_stripname_cnf
+])# _LT_FUNC_STRIPNAME_CNF
+
 # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
 # ---------------------------------
 # Figure out "hidden" library dependencies from verbose
@@ -6347,6 +6929,7 @@
 # objects, libraries and library flags.
 m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
 [m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
 # Dependencies to place before and after the object being linked:
 _LT_TAGVAR(predep_objects, $1)=
 _LT_TAGVAR(postdep_objects, $1)=
@@ -6396,7 +6979,20 @@
   }
 };
 _LT_EOF
+], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
+package foo
+func foo() {
+}
+_LT_EOF
 ])
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
+esac
+
 dnl Parse the compiler output and extract the necessary
 dnl objects, libraries and library flags.
 if AC_TRY_EVAL(ac_compile); then
@@ -6408,7 +7004,7 @@
   pre_test_object_deps_done=no
 
   for p in `eval "$output_verbose_link_cmd"`; do
-    case $p in
+    case ${prev}${p} in
 
     -L* | -R* | -l*)
        # Some compilers place space between "-{L,R}" and the path.
@@ -6417,13 +7013,22 @@
           test $p = "-R"; then
 	 prev=$p
 	 continue
-       else
-	 prev=
        fi
 
+       # Expand the sysroot to ease extracting the directories later.
+       if test -z "$prev"; then
+         case $p in
+         -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+         -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+         -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+         esac
+       fi
+       case $p in
+       =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+       esac
        if test "$pre_test_object_deps_done" = no; then
-	 case $p in
-	 -L* | -R*)
+	 case ${prev} in
+	 -L | -R)
 	   # Internal compiler library paths should come after those
 	   # provided the user.  The postdeps already come after the
 	   # user supplied libs so there is no need to process them.
@@ -6443,8 +7048,10 @@
 	   _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
 	 fi
        fi
+       prev=
        ;;
 
+    *.lto.$objext) ;; # Ignore GCC LTO objects
     *.$objext)
        # This assumes that the test object file only shows up
        # once in the compiler output.
@@ -6480,6 +7087,7 @@
 fi
 
 $RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
 
 # PORTME: override above test on systems where it is broken
 m4_if([$1], [CXX],
@@ -6516,7 +7124,7 @@
 
 solaris*)
   case $cc_basename in
-  CC*)
+  CC* | sunCC*)
     # The more standards-conforming stlport4 library is
     # incompatible with the Cstd library. Avoid specifying
     # it if it's in CXXFLAGS. Ignore libCrun as
@@ -6560,32 +7168,16 @@
 ])# _LT_SYS_HIDDEN_LIBDEPS
 
 
-# _LT_PROG_F77
-# ------------
-# Since AC_PROG_F77 is broken, in that it returns the empty string
-# if there is no fortran compiler, we have our own version here.
-m4_defun([_LT_PROG_F77],
-[
-pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
-AC_PROG_F77
-if test -z "$F77" || test "X$F77" = "Xno"; then
-  _lt_disable_F77=yes
-fi
-popdef([AC_MSG_ERROR])
-])# _LT_PROG_F77
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([_LT_PROG_F77], [])
-
-
 # _LT_LANG_F77_CONFIG([TAG])
 # --------------------------
 # Ensure that the configuration variables for a Fortran 77 compiler are
 # suitably defined.  These variables are subsequently used by _LT_CONFIG
 # to write the compiler configuration to `libtool'.
 m4_defun([_LT_LANG_F77_CONFIG],
-[AC_REQUIRE([_LT_PROG_F77])dnl
-AC_LANG_PUSH(Fortran 77)
+[AC_LANG_PUSH(Fortran 77)
+if test -z "$F77" || test "X$F77" = "Xno"; then
+  _lt_disable_F77=yes
+fi
 
 _LT_TAGVAR(archive_cmds_need_lc, $1)=no
 _LT_TAGVAR(allow_undefined_flag, $1)=
@@ -6595,7 +7187,6 @@
 _LT_TAGVAR(hardcode_direct, $1)=no
 _LT_TAGVAR(hardcode_direct_absolute, $1)=no
 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
 _LT_TAGVAR(hardcode_libdir_separator, $1)=
 _LT_TAGVAR(hardcode_minus_L, $1)=no
 _LT_TAGVAR(hardcode_automatic, $1)=no
@@ -6604,6 +7195,8 @@
 _LT_TAGVAR(module_expsym_cmds, $1)=
 _LT_TAGVAR(link_all_deplibs, $1)=unknown
 _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
 _LT_TAGVAR(no_undefined_flag, $1)=
 _LT_TAGVAR(whole_archive_flag_spec, $1)=
 _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
@@ -6643,7 +7236,9 @@
   # Allow CC to be a program name with arguments.
   lt_save_CC="$CC"
   lt_save_GCC=$GCC
+  lt_save_CFLAGS=$CFLAGS
   CC=${F77-"f77"}
+  CFLAGS=$FFLAGS
   compiler=$CC
   _LT_TAGVAR(compiler, $1)=$CC
   _LT_CC_BASENAME([$compiler])
@@ -6697,38 +7292,24 @@
 
   GCC=$lt_save_GCC
   CC="$lt_save_CC"
+  CFLAGS="$lt_save_CFLAGS"
 fi # test "$_lt_disable_F77" != yes
 
 AC_LANG_POP
 ])# _LT_LANG_F77_CONFIG
 
 
-# _LT_PROG_FC
-# -----------
-# Since AC_PROG_FC is broken, in that it returns the empty string
-# if there is no fortran compiler, we have our own version here.
-m4_defun([_LT_PROG_FC],
-[
-pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
-AC_PROG_FC
-if test -z "$FC" || test "X$FC" = "Xno"; then
-  _lt_disable_FC=yes
-fi
-popdef([AC_MSG_ERROR])
-])# _LT_PROG_FC
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([_LT_PROG_FC], [])
-
-
 # _LT_LANG_FC_CONFIG([TAG])
 # -------------------------
 # Ensure that the configuration variables for a Fortran compiler are
 # suitably defined.  These variables are subsequently used by _LT_CONFIG
 # to write the compiler configuration to `libtool'.
 m4_defun([_LT_LANG_FC_CONFIG],
-[AC_REQUIRE([_LT_PROG_FC])dnl
-AC_LANG_PUSH(Fortran)
+[AC_LANG_PUSH(Fortran)
+
+if test -z "$FC" || test "X$FC" = "Xno"; then
+  _lt_disable_FC=yes
+fi
 
 _LT_TAGVAR(archive_cmds_need_lc, $1)=no
 _LT_TAGVAR(allow_undefined_flag, $1)=
@@ -6738,7 +7319,6 @@
 _LT_TAGVAR(hardcode_direct, $1)=no
 _LT_TAGVAR(hardcode_direct_absolute, $1)=no
 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
 _LT_TAGVAR(hardcode_libdir_separator, $1)=
 _LT_TAGVAR(hardcode_minus_L, $1)=no
 _LT_TAGVAR(hardcode_automatic, $1)=no
@@ -6747,6 +7327,8 @@
 _LT_TAGVAR(module_expsym_cmds, $1)=
 _LT_TAGVAR(link_all_deplibs, $1)=unknown
 _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
 _LT_TAGVAR(no_undefined_flag, $1)=
 _LT_TAGVAR(whole_archive_flag_spec, $1)=
 _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
@@ -6786,7 +7368,9 @@
   # Allow CC to be a program name with arguments.
   lt_save_CC="$CC"
   lt_save_GCC=$GCC
+  lt_save_CFLAGS=$CFLAGS
   CC=${FC-"f95"}
+  CFLAGS=$FCFLAGS
   compiler=$CC
   GCC=$ac_cv_fc_compiler_gnu
 
@@ -6842,7 +7426,8 @@
   fi # test -n "$compiler"
 
   GCC=$lt_save_GCC
-  CC="$lt_save_CC"
+  CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
 fi # test "$_lt_disable_FC" != yes
 
 AC_LANG_POP
@@ -6879,10 +7464,12 @@
 _LT_LINKER_BOILERPLATE
 
 # Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
 lt_save_GCC=$GCC
 GCC=yes
 CC=${GCJ-"gcj"}
+CFLAGS=$GCJFLAGS
 compiler=$CC
 _LT_TAGVAR(compiler, $1)=$CC
 _LT_TAGVAR(LD, $1)="$LD"
@@ -6892,6 +7479,8 @@
 _LT_TAGVAR(archive_cmds_need_lc, $1)=no
 
 _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
 
 ## CAVEAT EMPTOR:
 ## There is no encapsulation within the following macros, do not change
@@ -6911,10 +7500,82 @@
 AC_LANG_RESTORE
 
 GCC=$lt_save_GCC
-CC="$lt_save_CC"
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
 ])# _LT_LANG_GCJ_CONFIG
 
 
+# _LT_LANG_GO_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Go compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GO_CONFIG],
+[AC_REQUIRE([LT_PROG_GO])dnl
+AC_LANG_SAVE
+
+# Source file extension for Go test sources.
+ac_ext=go
+
+# Object file extension for compiled Go test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="package main; func main() { }"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='package main; func main() { }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GOC-"gccgo"}
+CFLAGS=$GOFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# Go did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+
+  _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GO_CONFIG
+
+
 # _LT_LANG_RC_CONFIG([TAG])
 # -------------------------
 # Ensure that the configuration variables for the Windows resource compiler
@@ -6946,9 +7607,11 @@
 
 # Allow CC to be a program name with arguments.
 lt_save_CC="$CC"
+lt_save_CFLAGS=$CFLAGS
 lt_save_GCC=$GCC
 GCC=
 CC=${RC-"windres"}
+CFLAGS=
 compiler=$CC
 _LT_TAGVAR(compiler, $1)=$CC
 _LT_CC_BASENAME([$compiler])
@@ -6961,7 +7624,8 @@
 
 GCC=$lt_save_GCC
 AC_LANG_RESTORE
-CC="$lt_save_CC"
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
 ])# _LT_LANG_RC_CONFIG
 
 
@@ -6981,6 +7645,13 @@
 dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
 
 
+# LT_PROG_GO
+# ----------
+AC_DEFUN([LT_PROG_GO],
+[AC_CHECK_TOOL(GOC, gccgo,)
+])
+
+
 # LT_PROG_RC
 # ----------
 AC_DEFUN([LT_PROG_RC],
@@ -7020,6 +7691,15 @@
 AC_SUBST([OBJDUMP])
 ])
 
+# _LT_DECL_DLLTOOL
+# ----------------
+# Ensure DLLTOOL variable is set.
+m4_defun([_LT_DECL_DLLTOOL],
+[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
+AC_SUBST([DLLTOOL])
+])
 
 # _LT_DECL_SED
 # ------------
@@ -7113,8 +7793,8 @@
 # Try some XSI features
 xsi_shell=no
 ( _lt_dummy="a/b/c"
-  test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
-      = c,a/b,, \
+  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,b/c, \
     && eval 'test $(( 1 + 1 )) -eq 2 \
     && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
   && xsi_shell=yes
@@ -7153,208 +7833,162 @@
 ])# _LT_CHECK_SHELL_FEATURES
 
 
-# _LT_PROG_XSI_SHELLFNS
-# ---------------------
-# Bourne and XSI compatible variants of some useful shell functions.
-m4_defun([_LT_PROG_XSI_SHELLFNS],
-[case $xsi_shell in
-  yes)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-  case ${1} in
-    */*) func_dirname_result="${1%/*}${2}" ;;
-    *  ) func_dirname_result="${3}" ;;
-  esac
-}
-
-# func_basename file
-func_basename ()
-{
-  func_basename_result="${1##*/}"
-}
-
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-#   dirname:  Compute the dirname of FILE.  If nonempty,
-#             add APPEND to the result, otherwise set result
-#             to NONDIR_REPLACEMENT.
-#             value returned in "$func_dirname_result"
-#   basename: Compute filename of FILE.
-#             value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
-  case ${1} in
-    */*) func_dirname_result="${1%/*}${2}" ;;
-    *  ) func_dirname_result="${3}" ;;
-  esac
-  func_basename_result="${1##*/}"
-}
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-func_stripname ()
-{
-  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
-  # positional parameters, so assign one to ordinary parameter first.
-  func_stripname_result=${3}
-  func_stripname_result=${func_stripname_result#"${1}"}
-  func_stripname_result=${func_stripname_result%"${2}"}
-}
-
-# func_opt_split
-func_opt_split ()
-{
-  func_opt_split_opt=${1%%=*}
-  func_opt_split_arg=${1#*=}
-}
-
-# func_lo2o object
-func_lo2o ()
-{
-  case ${1} in
-    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
-    *)    func_lo2o_result=${1} ;;
-  esac
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
-  func_xform_result=${1%.*}.lo
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
-  func_arith_result=$(( $[*] ))
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-  func_len_result=${#1}
-}
-
-_LT_EOF
-    ;;
-  *) # Bourne compatible functions.
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-  # Extract subdirectory from the argument.
-  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
-  if test "X$func_dirname_result" = "X${1}"; then
-    func_dirname_result="${3}"
-  else
-    func_dirname_result="$func_dirname_result${2}"
-  fi
-}
-
-# func_basename file
-func_basename ()
-{
-  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
-}
-
-dnl func_dirname_and_basename
-dnl A portable version of this function is already defined in general.m4sh
-dnl so there is no need for it here.
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
-  case ${2} in
-    .*) func_stripname_result=`$ECHO "X${3}" \
-           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
-    *)  func_stripname_result=`$ECHO "X${3}" \
-           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
-  esac
-}
-
-# sed scripts:
-my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
-my_sed_long_arg='1s/^-[[^=]]*=//'
-
-# func_opt_split
-func_opt_split ()
-{
-  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
-  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
-}
-
-# func_lo2o object
-func_lo2o ()
-{
-  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
-  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
-  func_arith_result=`expr "$[@]"`
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-  func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
-}
-
-_LT_EOF
-esac
-
-case $lt_shell_append in
-  yes)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-  eval "$[1]+=\$[2]"
-}
-_LT_EOF
-    ;;
-  *)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-  eval "$[1]=\$$[1]\$[2]"
-}
-
-_LT_EOF
-    ;;
-  esac
+# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
+# ------------------------------------------------------
+# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
+# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
+m4_defun([_LT_PROG_FUNCTION_REPLACE],
+[dnl {
+sed -e '/^$1 ()$/,/^} # $1 /c\
+$1 ()\
+{\
+m4_bpatsubsts([$2], [$], [\\], [^\([	 ]\)], [\\\1])
+} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
 ])
+
+
+# _LT_PROG_REPLACE_SHELLFNS
+# -------------------------
+# Replace existing portable implementations of several shell functions with
+# equivalent extended shell implementations where those features are available..
+m4_defun([_LT_PROG_REPLACE_SHELLFNS],
+[if test x"$xsi_shell" = xyes; then
+  _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
+    case ${1} in
+      */*) func_dirname_result="${1%/*}${2}" ;;
+      *  ) func_dirname_result="${3}" ;;
+    esac])
+
+  _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
+    func_basename_result="${1##*/}"])
+
+  _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
+    case ${1} in
+      */*) func_dirname_result="${1%/*}${2}" ;;
+      *  ) func_dirname_result="${3}" ;;
+    esac
+    func_basename_result="${1##*/}"])
+
+  _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
+    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+    # positional parameters, so assign one to ordinary parameter first.
+    func_stripname_result=${3}
+    func_stripname_result=${func_stripname_result#"${1}"}
+    func_stripname_result=${func_stripname_result%"${2}"}])
+
+  _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
+    func_split_long_opt_name=${1%%=*}
+    func_split_long_opt_arg=${1#*=}])
+
+  _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
+    func_split_short_opt_arg=${1#??}
+    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
+
+  _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
+    case ${1} in
+      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+      *)    func_lo2o_result=${1} ;;
+    esac])
+
+  _LT_PROG_FUNCTION_REPLACE([func_xform], [    func_xform_result=${1%.*}.lo])
+
+  _LT_PROG_FUNCTION_REPLACE([func_arith], [    func_arith_result=$(( $[*] ))])
+
+  _LT_PROG_FUNCTION_REPLACE([func_len], [    func_len_result=${#1}])
+fi
+
+if test x"$lt_shell_append" = xyes; then
+  _LT_PROG_FUNCTION_REPLACE([func_append], [    eval "${1}+=\\${2}"])
+
+  _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
+    func_quote_for_eval "${2}"
+dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
+    eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
+
+  # Save a `func_append' function call where possible by direct use of '+='
+  sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+else
+  # Save a `func_append' function call even when '+=' is not available
+  sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+  AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
+fi
+])
+
+# _LT_PATH_CONVERSION_FUNCTIONS
+# -----------------------------
+# Determine which file name conversion functions should be used by
+# func_to_host_file (and, implicitly, by func_to_host_path).  These are needed
+# for certain cross-compile configurations and native mingw.
+m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_MSG_CHECKING([how to convert $build file names to $host format])
+AC_CACHE_VAL(lt_cv_to_host_file_cmd,
+[case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+])
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
+_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
+         [0], [convert $build file names to $host format])dnl
+
+AC_MSG_CHECKING([how to convert $build file names to toolchain format])
+AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
+[#assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+])
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
+_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
+         [0], [convert $build files to toolchain format])dnl
+])# _LT_PATH_CONVERSION_FUNCTIONS
diff --git a/Modules/_ctypes/libffi/m4/ltoptions.m4 b/Modules/_ctypes/libffi/m4/ltoptions.m4
index 34151a3..5d9acd8 100644
--- a/Modules/_ctypes/libffi/m4/ltoptions.m4
+++ b/Modules/_ctypes/libffi/m4/ltoptions.m4
@@ -1,13 +1,14 @@
 # Helper functions for option handling.                    -*- Autoconf -*-
 #
-#   Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+#   Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
+#   Inc.
 #   Written by Gary V. Vaughan, 2004
 #
 # This file is free software; the Free Software Foundation gives
 # unlimited permission to copy and/or distribute it, with or without
 # modifications, as long as this notice is preserved.
 
-# serial 6 ltoptions.m4
+# serial 7 ltoptions.m4
 
 # This is to help aclocal find these macros, as it can't see m4_define.
 AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
@@ -125,7 +126,7 @@
 [enable_win32_dll=yes
 
 case $host in
-*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
   AC_CHECK_TOOL(AS, as, false)
   AC_CHECK_TOOL(DLLTOOL, dlltool, false)
   AC_CHECK_TOOL(OBJDUMP, objdump, false)
@@ -133,13 +134,13 @@
 esac
 
 test -z "$AS" && AS=as
-_LT_DECL([], [AS],      [0], [Assembler program])dnl
+_LT_DECL([], [AS],      [1], [Assembler program])dnl
 
 test -z "$DLLTOOL" && DLLTOOL=dlltool
-_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
 
 test -z "$OBJDUMP" && OBJDUMP=objdump
-_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
+_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
 ])# win32-dll
 
 AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
@@ -325,9 +326,24 @@
 # MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
 m4_define([_LT_WITH_PIC],
 [AC_ARG_WITH([pic],
-    [AS_HELP_STRING([--with-pic],
+    [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
 	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-    [pic_mode="$withval"],
+    [lt_p=${PACKAGE-default}
+    case $withval in
+    yes|no) pic_mode=$withval ;;
+    *)
+      pic_mode=default
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for lt_pkg in $withval; do
+	IFS="$lt_save_ifs"
+	if test "X$lt_pkg" = "X$lt_p"; then
+	  pic_mode=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
     [pic_mode=default])
 
 test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
diff --git a/Modules/_ctypes/libffi/m4/ltversion.m4 b/Modules/_ctypes/libffi/m4/ltversion.m4
index b8e154f..07a8602 100644
--- a/Modules/_ctypes/libffi/m4/ltversion.m4
+++ b/Modules/_ctypes/libffi/m4/ltversion.m4
@@ -7,17 +7,17 @@
 # unlimited permission to copy and/or distribute it, with or without
 # modifications, as long as this notice is preserved.
 
-# Generated from ltversion.in.
+# @configure_input@
 
-# serial 3012 ltversion.m4
+# serial 3337 ltversion.m4
 # This file is part of GNU Libtool
 
-m4_define([LT_PACKAGE_VERSION], [2.2.6])
-m4_define([LT_PACKAGE_REVISION], [1.3012])
+m4_define([LT_PACKAGE_VERSION], [2.4.2])
+m4_define([LT_PACKAGE_REVISION], [1.3337])
 
 AC_DEFUN([LTVERSION_VERSION],
-[macro_version='2.2.6'
-macro_revision='1.3012'
+[macro_version='2.4.2'
+macro_revision='1.3337'
 _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
 _LT_DECL(, macro_revision, 0)
 ])
diff --git a/Modules/_ctypes/libffi/m4/lt~obsolete.m4 b/Modules/_ctypes/libffi/m4/lt~obsolete.m4
index 637bb20..c573da9 100644
--- a/Modules/_ctypes/libffi/m4/lt~obsolete.m4
+++ b/Modules/_ctypes/libffi/m4/lt~obsolete.m4
@@ -1,13 +1,13 @@
 # lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
 #
-#   Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
+#   Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
 #   Written by Scott James Remnant, 2004.
 #
 # This file is free software; the Free Software Foundation gives
 # unlimited permission to copy and/or distribute it, with or without
 # modifications, as long as this notice is preserved.
 
-# serial 4 lt~obsolete.m4
+# serial 5 lt~obsolete.m4
 
 # These exist entirely to fool aclocal when bootstrapping libtool.
 #
@@ -77,7 +77,6 @@
 m4_ifndef([_LT_AC_LANG_CXX],		[AC_DEFUN([_LT_AC_LANG_CXX])])
 m4_ifndef([_LT_AC_LANG_F77],		[AC_DEFUN([_LT_AC_LANG_F77])])
 m4_ifndef([_LT_AC_LANG_GCJ],		[AC_DEFUN([_LT_AC_LANG_GCJ])])
-m4_ifndef([AC_LIBTOOL_RC],		[AC_DEFUN([AC_LIBTOOL_RC])])
 m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
 m4_ifndef([_LT_AC_LANG_C_CONFIG],	[AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
 m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
@@ -90,3 +89,10 @@
 m4_ifndef([_LT_AC_LANG_RC_CONFIG],	[AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
 m4_ifndef([AC_LIBTOOL_CONFIG],		[AC_DEFUN([AC_LIBTOOL_CONFIG])])
 m4_ifndef([_LT_AC_FILE_LTDLL_C],	[AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
+m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS],	[AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
+m4_ifndef([_LT_AC_PROG_CXXCPP],		[AC_DEFUN([_LT_AC_PROG_CXXCPP])])
+m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS],	[AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
+m4_ifndef([_LT_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_PROG_F77],		[AC_DEFUN([_LT_PROG_F77])])
+m4_ifndef([_LT_PROG_FC],		[AC_DEFUN([_LT_PROG_FC])])
+m4_ifndef([_LT_PROG_CXX],		[AC_DEFUN([_LT_PROG_CXX])])
diff --git a/Modules/_ctypes/libffi/man/Makefile.am b/Modules/_ctypes/libffi/man/Makefile.am
index 2519277..afcbfb6 100644
--- a/Modules/_ctypes/libffi/man/Makefile.am
+++ b/Modules/_ctypes/libffi/man/Makefile.am
@@ -2,7 +2,7 @@
 
 AUTOMAKE_OPTIONS=foreign
 
-EXTRA_DIST = ffi.3 ffi_call.3 ffi_prep_cif.3
+EXTRA_DIST = ffi.3 ffi_call.3 ffi_prep_cif.3 ffi_prep_cif_var.3
 
-man_MANS = ffi.3 ffi_call.3 ffi_prep_cif.3
+man_MANS = ffi.3 ffi_call.3 ffi_prep_cif.3 ffi_prep_cif_var.3
 
diff --git a/Modules/_ctypes/libffi/man/Makefile.in b/Modules/_ctypes/libffi/man/Makefile.in
index 3e40be2..c02e1f2 100644
--- a/Modules/_ctypes/libffi/man/Makefile.in
+++ b/Modules/_ctypes/libffi/man/Makefile.in
@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11 from Makefile.am.
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,6 +14,23 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
+am__make_dryrun = \
+  { \
+    am__dry=no; \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+      *) \
+        for am__flg in $$MAKEFLAGS; do \
+          case $$am__flg in \
+            *=*|--*) ;; \
+            *n*) am__dry=yes; break;; \
+          esac; \
+        done;; \
+    esac; \
+    test $$am__dry = yes; \
+  }
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -37,7 +53,19 @@
 subdir = man
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+am__aclocal_m4_deps = $(top_srcdir)/m4/asmcfi.m4 \
+	$(top_srcdir)/m4/ax_append_flag.m4 \
+	$(top_srcdir)/m4/ax_cc_maxopt.m4 \
+	$(top_srcdir)/m4/ax_cflags_warn_all.m4 \
+	$(top_srcdir)/m4/ax_check_compile_flag.m4 \
+	$(top_srcdir)/m4/ax_compiler_vendor.m4 \
+	$(top_srcdir)/m4/ax_configure_args.m4 \
+	$(top_srcdir)/m4/ax_enable_builddir.m4 \
+	$(top_srcdir)/m4/ax_gcc_archflag.m4 \
+	$(top_srcdir)/m4/ax_gcc_x86_cpuid.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/acinclude.m4 \
 	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
@@ -47,6 +75,11 @@
 CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
@@ -68,6 +101,12 @@
 am__base_list = \
   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
 man3dir = $(mandir)/man3
 am__installdirs = "$(DESTDIR)$(man3dir)"
 NROFF = nroff
@@ -76,6 +115,7 @@
 ACLOCAL = @ACLOCAL@
 ALLOCA = @ALLOCA@
 AMTAR = @AMTAR@
+AM_LTLDFLAGS = @AM_LTLDFLAGS@
 AM_RUNTESTFLAGS = @AM_RUNTESTFLAGS@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
@@ -93,6 +133,7 @@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
 DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
@@ -100,6 +141,7 @@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
+FFI_EXEC_TRAMPOLINE_TABLE = @FFI_EXEC_TRAMPOLINE_TABLE@
 FGREP = @FGREP@
 GREP = @GREP@
 HAVE_LONG_DOUBLE = @HAVE_LONG_DOUBLE@
@@ -118,6 +160,7 @@
 LTLIBOBJS = @LTLIBOBJS@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
 NM = @NM@
 NMEDIT = @NMEDIT@
@@ -130,8 +173,10 @@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
+PRTDIAG = @PRTDIAG@
 RANLIB = @RANLIB@
 SED = @SED@
 SET_MAKE = @SET_MAKE@
@@ -144,6 +189,7 @@
 abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 am__include = @am__include@
@@ -151,6 +197,7 @@
 am__quote = @am__quote@
 am__tar = @am__tar@
 am__untar = @am__untar@
+ax_enable_builddir_sed = @ax_enable_builddir_sed@
 bindir = @bindir@
 build = @build@
 build_alias = @build_alias@
@@ -176,7 +223,6 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -187,6 +233,7 @@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
+sys_symbol_underscore = @sys_symbol_underscore@
 sysconfdir = @sysconfdir@
 target = @target@
 target_alias = @target_alias@
@@ -199,8 +246,8 @@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
 AUTOMAKE_OPTIONS = foreign
-EXTRA_DIST = ffi.3 ffi_call.3 ffi_prep_cif.3
-man_MANS = ffi.3 ffi_call.3 ffi_prep_cif.3
+EXTRA_DIST = ffi.3 ffi_call.3 ffi_prep_cif.3 ffi_prep_cif_var.3
+man_MANS = ffi.3 ffi_call.3 ffi_prep_cif.3 ffi_prep_cif_var.3
 all: all-am
 
 .SUFFIXES:
@@ -242,11 +289,18 @@
 	-rm -rf .libs _libs
 install-man3: $(man_MANS)
 	@$(NORMAL_INSTALL)
-	test -z "$(man3dir)" || $(MKDIR_P) "$(DESTDIR)$(man3dir)"
-	@list=''; test -n "$(man3dir)" || exit 0; \
-	{ for i in $$list; do echo "$$i"; done; \
-	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
-	  sed -n '/\.3[a-z]*$$/p'; \
+	@list1=''; \
+	list2='$(man_MANS)'; \
+	test -n "$(man3dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.3[a-z]*$$/p'; \
+	fi; \
 	} | while read p; do \
 	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; echo "$$p"; \
@@ -275,15 +329,15 @@
 	  sed -n '/\.3[a-z]*$$/p'; \
 	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
 	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
-	test -z "$$files" || { \
-	  echo " ( cd '$(DESTDIR)$(man3dir)' && rm -f" $$files ")"; \
-	  cd "$(DESTDIR)$(man3dir)" && rm -f $$files; }
+	dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir)
 tags: TAGS
 TAGS:
 
 ctags: CTAGS
 CTAGS:
 
+cscope cscopelist:
+
 
 distdir: $(DISTFILES)
 	@list='$(MANS)'; if test -n "$$list"; then \
@@ -292,10 +346,10 @@
 	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
 	  if test -n "$$list" && \
 	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
-	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
+	    echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
 	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
 	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
-	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
+	    echo "       typically 'make maintainer-clean' will remove them" >&2; \
 	    exit 1; \
 	  else :; fi; \
 	else :; fi
@@ -345,10 +399,15 @@
 
 installcheck: installcheck-am
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
diff --git a/Modules/_ctypes/libffi/man/ffi.3 b/Modules/_ctypes/libffi/man/ffi.3
index 18b5d5d..1f1d303 100644
--- a/Modules/_ctypes/libffi/man/ffi.3
+++ b/Modules/_ctypes/libffi/man/ffi.3
@@ -16,6 +16,15 @@
 .Fa "ffi_type **atypes"
 .Fc
 .Ft void
+.Fo ffi_prep_cif_var
+.Fa "ffi_cif *cif"
+.Fa "ffi_abi abi"
+.Fa "unsigned int nfixedargs"
+.Fa "unsigned int ntotalargs"
+.Fa "ffi_type *rtype"
+.Fa "ffi_type **atypes"
+.Fc
+.Ft void
 .Fo ffi_call
 .Fa "ffi_cif *cif"
 .Fa "void (*fn)(void)"
@@ -28,4 +37,5 @@
 the called function's interface at compile time.
 .Sh SEE ALSO
 .Xr ffi_prep_cif 3 ,
+.Xr ffi_prep_cif_var 3 ,
 .Xr ffi_call 3
diff --git a/Modules/_ctypes/libffi/man/ffi_prep_cif.3 b/Modules/_ctypes/libffi/man/ffi_prep_cif.3
index 9436b31..ab2be8a 100644
--- a/Modules/_ctypes/libffi/man/ffi_prep_cif.3
+++ b/Modules/_ctypes/libffi/man/ffi_prep_cif.3
@@ -37,7 +37,9 @@
 points to an
 .Nm ffi_type
 that describes the data type, size and alignment of the
-return value.
+return value. Note that to call a variadic function
+.Nm ffi_prep_cif_var
+must be used instead.
 .Sh RETURN VALUES
 Upon successful completion,
 .Nm ffi_prep_cif
@@ -59,8 +61,8 @@
 .Nm FFI_BAD_ABI
 will be returned. Available ABIs are
 defined in
-.Nm <ffitarget.h>
-.
+.Nm <ffitarget.h> .
 .Sh SEE ALSO
 .Xr ffi 3 ,
-.Xr ffi_call 3 
+.Xr ffi_call 3 ,
+.Xr ffi_prep_cif_var 3
diff --git a/Modules/_ctypes/libffi/man/ffi_prep_cif_var.3 b/Modules/_ctypes/libffi/man/ffi_prep_cif_var.3
new file mode 100644
index 0000000..7e19d0b
--- /dev/null
+++ b/Modules/_ctypes/libffi/man/ffi_prep_cif_var.3
@@ -0,0 +1,73 @@
+.Dd January 25, 2011
+.Dt ffi_prep_cif_var 3
+.Sh NAME
+.Nm ffi_prep_cif_var
+.Nd Prepare a
+.Nm ffi_cif
+structure for use with
+.Nm ffi_call
+for variadic functions.
+.Sh SYNOPSIS
+.In ffi.h
+.Ft ffi_status
+.Fo ffi_prep_cif_var
+.Fa "ffi_cif *cif"
+.Fa "ffi_abi abi"
+.Fa "unsigned int nfixedargs"
+.Fa "unsigned int ntotalargs"
+.Fa "ffi_type *rtype"
+.Fa "ffi_type **atypes"
+.Fc
+.Sh DESCRIPTION
+The
+.Nm ffi_prep_cif_var
+function prepares a
+.Nm ffi_cif
+structure for use with
+.Nm ffi_call
+for variadic functions.
+.Fa abi
+specifies a set of calling conventions to use.
+.Fa atypes
+is an array of
+.Fa ntotalargs
+pointers to
+.Nm ffi_type
+structs that describe the data type, size and alignment of each argument.
+.Fa rtype
+points to an
+.Nm ffi_type
+that describes the data type, size and alignment of the
+return value.
+.Fa nfixedargs
+must contain the number of fixed (non-variadic) arguments.
+Note that to call a non-variadic function
+.Nm ffi_prep_cif
+must be used.
+.Sh RETURN VALUES
+Upon successful completion,
+.Nm ffi_prep_cif_var
+returns
+.Nm FFI_OK .
+It will return
+.Nm FFI_BAD_TYPEDEF
+if
+.Fa cif
+is
+.Nm NULL
+or
+.Fa atypes
+or
+.Fa rtype
+is malformed. If
+.Fa abi
+does not refer to a valid ABI,
+.Nm FFI_BAD_ABI
+will be returned. Available ABIs are
+defined in
+.Nm <ffitarget.h>
+.
+.Sh SEE ALSO
+.Xr ffi 3 ,
+.Xr ffi_call 3 ,
+.Xr ffi_prep_cif 3
diff --git a/Modules/_ctypes/libffi/mdate-sh b/Modules/_ctypes/libffi/mdate-sh
old mode 100755
new mode 100644
diff --git a/Modules/_ctypes/libffi/missing b/Modules/_ctypes/libffi/missing
index 894e786..28055d2 100755
--- a/Modules/_ctypes/libffi/missing
+++ b/Modules/_ctypes/libffi/missing
@@ -1,10 +1,10 @@
 #! /bin/sh
 # Common stub for a few missing GNU programs while installing.
 
-scriptversion=2005-06-08.21
+scriptversion=2009-04-28.21; # UTC
 
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
-#   Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
+# 2008, 2009 Free Software Foundation, Inc.
 # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
@@ -18,9 +18,7 @@
 # GNU General Public License for more details.
 
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -33,6 +31,8 @@
 fi
 
 run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
 
 # In the cases where this matters, `missing' is being run in the
 # srcdir already.
@@ -44,7 +44,7 @@
 
 msg="missing on your system"
 
-case "$1" in
+case $1 in
 --run)
   # Try to run requested program, and just exit if it succeeds.
   run=
@@ -77,6 +77,7 @@
   aclocal      touch file \`aclocal.m4'
   autoconf     touch file \`configure'
   autoheader   touch file \`config.h.in'
+  autom4te     touch the output file, or create a stub one
   automake     touch all \`Makefile.in' files
   bison        create \`y.tab.[ch]', if possible, from existing .[ch]
   flex         create \`lex.yy.c', if possible, from existing .c
@@ -86,6 +87,9 @@
   tar          try tar, gnutar, gtar, then tar without non-portable flags
   yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
 
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+\`g' are ignored when checking the name.
+
 Send bug reports to <bug-automake@gnu.org>."
     exit $?
     ;;
@@ -103,15 +107,22 @@
 
 esac
 
+# normalize program name to check for.
+program=`echo "$1" | sed '
+  s/^gnu-//; t
+  s/^gnu//; t
+  s/^g//; t'`
+
 # Now exit if we have it, but it failed.  Also exit now if we
 # don't have it and --version was passed (most likely to detect
-# the program).
-case "$1" in
-  lex|yacc)
+# the program).  This is about non-GNU programs, so use $1 not
+# $program.
+case $1 in
+  lex*|yacc*)
     # Not GNU programs, they don't have --version.
     ;;
 
-  tar)
+  tar*)
     if test -n "$run"; then
        echo 1>&2 "ERROR: \`tar' requires --run"
        exit 1
@@ -135,7 +146,7 @@
 
 # If it does not exist, or fails to run (possibly an outdated version),
 # try to emulate it.
-case "$1" in
+case $program in
   aclocal*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
@@ -145,7 +156,7 @@
     touch aclocal.m4
     ;;
 
-  autoconf)
+  autoconf*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified \`${configure_ac}'.  You might want to install the
@@ -154,7 +165,7 @@
     touch configure
     ;;
 
-  autoheader)
+  autoheader*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified \`acconfig.h' or \`${configure_ac}'.  You might want
@@ -164,7 +175,7 @@
     test -z "$files" && files="config.h"
     touch_files=
     for f in $files; do
-      case "$f" in
+      case $f in
       *:*) touch_files="$touch_files "`echo "$f" |
 				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
       *) touch_files="$touch_files $f.in";;
@@ -184,7 +195,7 @@
 	   while read f; do touch "$f"; done
     ;;
 
-  autom4te)
+  autom4te*)
     echo 1>&2 "\
 WARNING: \`$1' is needed, but is $msg.
          You might have modified some files without having the
@@ -192,8 +203,8 @@
          You can get \`$1' as part of \`Autoconf' from any GNU
          archive site."
 
-    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
-    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
     if test -f "$file"; then
 	touch $file
     else
@@ -207,80 +218,78 @@
     fi
     ;;
 
-  bison|yacc)
+  bison*|yacc*)
     echo 1>&2 "\
 WARNING: \`$1' $msg.  You should only need it if
          you modified a \`.y' file.  You may need the \`Bison' package
          in order for those modifications to take effect.  You can get
          \`Bison' from any GNU archive site."
     rm -f y.tab.c y.tab.h
-    if [ $# -ne 1 ]; then
+    if test $# -ne 1; then
         eval LASTARG="\${$#}"
-	case "$LASTARG" in
+	case $LASTARG in
 	*.y)
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" y.tab.c
 	    fi
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" y.tab.h
 	    fi
 	  ;;
 	esac
     fi
-    if [ ! -f y.tab.h ]; then
+    if test ! -f y.tab.h; then
 	echo >y.tab.h
     fi
-    if [ ! -f y.tab.c ]; then
+    if test ! -f y.tab.c; then
 	echo 'main() { return 0; }' >y.tab.c
     fi
     ;;
 
-  lex|flex)
+  lex*|flex*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified a \`.l' file.  You may need the \`Flex' package
          in order for those modifications to take effect.  You can get
          \`Flex' from any GNU archive site."
     rm -f lex.yy.c
-    if [ $# -ne 1 ]; then
+    if test $# -ne 1; then
         eval LASTARG="\${$#}"
-	case "$LASTARG" in
+	case $LASTARG in
 	*.l)
 	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" lex.yy.c
 	    fi
 	  ;;
 	esac
     fi
-    if [ ! -f lex.yy.c ]; then
+    if test ! -f lex.yy.c; then
 	echo 'main() { return 0; }' >lex.yy.c
     fi
     ;;
 
-  help2man)
+  help2man*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
 	 you modified a dependency of a manual page.  You may need the
 	 \`Help2man' package in order for those modifications to take
 	 effect.  You can get \`Help2man' from any GNU archive site."
 
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
-    fi
-    if [ -f "$file" ]; then
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
 	touch $file
     else
 	test -z "$file" || exec >$file
 	echo ".ab help2man is required to generate this page"
-	exit 1
+	exit $?
     fi
     ;;
 
-  makeinfo)
+  makeinfo*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified a \`.texi' or \`.texinfo' file, or any other file
@@ -289,11 +298,17 @@
          DU, IRIX).  You might want to install the \`Texinfo' package or
          the \`GNU make' package.  Grab either from any GNU archive site."
     # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
     if test -z "$file"; then
       # ... or it is the one specified with @setfilename ...
       infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
+      file=`sed -n '
+	/^@setfilename/{
+	  s/.* \([^ ]*\) *$/\1/
+	  p
+	  q
+	}' $infile`
       # ... or it is derived from the source name (dir/f.texi becomes f.info)
       test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
     fi
@@ -303,7 +318,7 @@
     touch $file
     ;;
 
-  tar)
+  tar*)
     shift
 
     # We have already tried tar in the generic part.
@@ -317,13 +332,13 @@
     fi
     firstarg="$1"
     if shift; then
-	case "$firstarg" in
+	case $firstarg in
 	*o*)
 	    firstarg=`echo "$firstarg" | sed s/o//`
 	    tar "$firstarg" "$@" && exit 0
 	    ;;
 	esac
-	case "$firstarg" in
+	case $firstarg in
 	*h*)
 	    firstarg=`echo "$firstarg" | sed s/h//`
 	    tar "$firstarg" "$@" && exit 0
@@ -356,5 +371,6 @@
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End:
diff --git a/Modules/_ctypes/libffi/msvcc.sh b/Modules/_ctypes/libffi/msvcc.sh
old mode 100644
new mode 100755
index 8301839..dcdbeab
--- a/Modules/_ctypes/libffi/msvcc.sh
+++ b/Modules/_ctypes/libffi/msvcc.sh
@@ -42,13 +42,11 @@
 # format and translated into something sensible for cl or ml.
 #
 
-# Disable specific warnings, and enable warnings-as-errors so we catch any
-# mistranslated args.
-nowarn="-wd4127 -wd4820 -wd4706 -wd4100 -wd4255 -wd4668 -wd4053 -wd4324"
-args="-nologo -W3 -WX $nowarn"
+args="-nologo -W3"
 md=-MD
 cl="cl"
 ml="ml"
+safeseh="-safeseh"
 output=
 
 while [ $# -gt 0 ]
@@ -66,15 +64,28 @@
     -m64)
       cl="cl"   # "$MSVC/x86_amd64/cl"
       ml="ml64" # "$MSVC/x86_amd64/ml64"
+      safeseh=
+      shift 1
+    ;;
+    -O0)
+      args="$args -Od"
       shift 1
     ;;
     -O*)
-      args="$args $1"
+      # If we're optimizing, make sure we explicitly turn on some optimizations
+      # that are implicitly disabled by debug symbols (-Zi).
+      args="$args $1 -OPT:REF -OPT:ICF -INCREMENTAL:NO"
       shift 1
     ;;
     -g)
-      # Can't specify -RTC1 or -Zi in opt. -Gy is ok. Use -OPT:REF?
-      args="$args -D_DEBUG -RTC1 -Zi"
+      # Enable debug symbol generation.
+      args="$args -Zi -DEBUG"
+      shift 1
+    ;;
+    -DFFI_DEBUG)
+      # Link against debug CRT and enable runtime error checks.
+      args="$args -RTC1"
+      defines="$defines $1"
       md=-MDd
       shift 1
     ;;
@@ -111,7 +122,8 @@
       shift 1
     ;;
     -Wall)
-      args="$args -Wall"
+      # -Wall on MSVC is overzealous, and we already build with -W3. Nothing
+      # to do here.
       shift 1
     ;;
     -Werror)
@@ -166,7 +178,7 @@
     echo "$cl -nologo -EP $includes $defines $src > $ppsrc"
     "$cl" -nologo -EP $includes $defines $src > $ppsrc || exit $?
     output="$(echo $output | sed 's%/F[dpa][^ ]*%%g')"
-    args="-nologo -safeseh $single $output $ppsrc"
+    args="-nologo $safeseh $single $output $ppsrc"
 
     echo "$ml $args"
     eval "\"$ml\" $args"
diff --git a/Modules/_ctypes/libffi/src/aarch64/ffi.c b/Modules/_ctypes/libffi/src/aarch64/ffi.c
new file mode 100644
index 0000000..1405665
--- /dev/null
+++ b/Modules/_ctypes/libffi/src/aarch64/ffi.c
@@ -0,0 +1,1076 @@
+/* Copyright (c) 2009, 2010, 2011, 2012 ARM Ltd.
+
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+``Software''), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  */
+
+#include <stdio.h>
+
+#include <ffi.h>
+#include <ffi_common.h>
+
+#include <stdlib.h>
+
+/* Stack alignment requirement in bytes */
+#define AARCH64_STACK_ALIGN 16
+
+#define N_X_ARG_REG 8
+#define N_V_ARG_REG 8
+
+#define AARCH64_FFI_WITH_V (1 << AARCH64_FFI_WITH_V_BIT)
+
+union _d
+{
+  UINT64 d;
+  UINT32 s[2];
+};
+
+struct call_context
+{
+  UINT64 x [AARCH64_N_XREG];
+  struct
+  {
+    union _d d[2];
+  } v [AARCH64_N_VREG];
+};
+
+static void *
+get_x_addr (struct call_context *context, unsigned n)
+{
+  return &context->x[n];
+}
+
+static void *
+get_s_addr (struct call_context *context, unsigned n)
+{
+#if defined __AARCH64EB__
+  return &context->v[n].d[1].s[1];
+#else
+  return &context->v[n].d[0].s[0];
+#endif
+}
+
+static void *
+get_d_addr (struct call_context *context, unsigned n)
+{
+#if defined __AARCH64EB__
+  return &context->v[n].d[1];
+#else
+  return &context->v[n].d[0];
+#endif
+}
+
+static void *
+get_v_addr (struct call_context *context, unsigned n)
+{
+  return &context->v[n];
+}
+
+/* Return the memory location at which a basic type would reside
+   were it to have been stored in register n.  */
+
+static void *
+get_basic_type_addr (unsigned short type, struct call_context *context,
+		     unsigned n)
+{
+  switch (type)
+    {
+    case FFI_TYPE_FLOAT:
+      return get_s_addr (context, n);
+    case FFI_TYPE_DOUBLE:
+      return get_d_addr (context, n);
+    case FFI_TYPE_LONGDOUBLE:
+      return get_v_addr (context, n);
+    case FFI_TYPE_UINT8:
+    case FFI_TYPE_SINT8:
+    case FFI_TYPE_UINT16:
+    case FFI_TYPE_SINT16:
+    case FFI_TYPE_UINT32:
+    case FFI_TYPE_SINT32:
+    case FFI_TYPE_INT:
+    case FFI_TYPE_POINTER:
+    case FFI_TYPE_UINT64:
+    case FFI_TYPE_SINT64:
+      return get_x_addr (context, n);
+    default:
+      FFI_ASSERT (0);
+      return NULL;
+    }
+}
+
+/* Return the alignment width for each of the basic types.  */
+
+static size_t
+get_basic_type_alignment (unsigned short type)
+{
+  switch (type)
+    {
+    case FFI_TYPE_FLOAT:
+    case FFI_TYPE_DOUBLE:
+      return sizeof (UINT64);
+    case FFI_TYPE_LONGDOUBLE:
+      return sizeof (long double);
+    case FFI_TYPE_UINT8:
+    case FFI_TYPE_SINT8:
+    case FFI_TYPE_UINT16:
+    case FFI_TYPE_SINT16:
+    case FFI_TYPE_UINT32:
+    case FFI_TYPE_INT:
+    case FFI_TYPE_SINT32:
+    case FFI_TYPE_POINTER:
+    case FFI_TYPE_UINT64:
+    case FFI_TYPE_SINT64:
+      return sizeof (UINT64);
+
+    default:
+      FFI_ASSERT (0);
+      return 0;
+    }
+}
+
+/* Return the size in bytes for each of the basic types.  */
+
+static size_t
+get_basic_type_size (unsigned short type)
+{
+  switch (type)
+    {
+    case FFI_TYPE_FLOAT:
+      return sizeof (UINT32);
+    case FFI_TYPE_DOUBLE:
+      return sizeof (UINT64);
+    case FFI_TYPE_LONGDOUBLE:
+      return sizeof (long double);
+    case FFI_TYPE_UINT8:
+      return sizeof (UINT8);
+    case FFI_TYPE_SINT8:
+      return sizeof (SINT8);
+    case FFI_TYPE_UINT16:
+      return sizeof (UINT16);
+    case FFI_TYPE_SINT16:
+      return sizeof (SINT16);
+    case FFI_TYPE_UINT32:
+      return sizeof (UINT32);
+    case FFI_TYPE_INT:
+    case FFI_TYPE_SINT32:
+      return sizeof (SINT32);
+    case FFI_TYPE_POINTER:
+    case FFI_TYPE_UINT64:
+      return sizeof (UINT64);
+    case FFI_TYPE_SINT64:
+      return sizeof (SINT64);
+
+    default:
+      FFI_ASSERT (0);
+      return 0;
+    }
+}
+
+extern void
+ffi_call_SYSV (unsigned (*)(struct call_context *context, unsigned char *,
+			    extended_cif *),
+               struct call_context *context,
+               extended_cif *,
+               unsigned,
+               void (*fn)(void));
+
+extern void
+ffi_closure_SYSV (ffi_closure *);
+
+/* Test for an FFI floating point representation.  */
+
+static unsigned
+is_floating_type (unsigned short type)
+{
+  return (type == FFI_TYPE_FLOAT || type == FFI_TYPE_DOUBLE
+	  || type == FFI_TYPE_LONGDOUBLE);
+}
+
+/* Test for a homogeneous structure.  */
+
+static unsigned short
+get_homogeneous_type (ffi_type *ty)
+{
+  if (ty->type == FFI_TYPE_STRUCT && ty->elements)
+    {
+      unsigned i;
+      unsigned short candidate_type
+	= get_homogeneous_type (ty->elements[0]);
+      for (i =1; ty->elements[i]; i++)
+	{
+	  unsigned short iteration_type = 0;
+	  /* If we have a nested struct, we must find its homogeneous type.
+	     If that fits with our candidate type, we are still
+	     homogeneous.  */
+	  if (ty->elements[i]->type == FFI_TYPE_STRUCT
+	      && ty->elements[i]->elements)
+	    {
+	      iteration_type = get_homogeneous_type (ty->elements[i]);
+	    }
+	  else
+	    {
+	      iteration_type = ty->elements[i]->type;
+	    }
+
+	  /* If we are not homogeneous, return FFI_TYPE_STRUCT.  */
+	  if (candidate_type != iteration_type)
+	    return FFI_TYPE_STRUCT;
+	}
+      return candidate_type;
+    }
+
+  /* Base case, we have no more levels of nesting, so we
+     are a basic type, and so, trivially homogeneous in that type.  */
+  return ty->type;
+}
+
+/* Determine the number of elements within a STRUCT.
+
+   Note, we must handle nested structs.
+
+   If ty is not a STRUCT this function will return 0.  */
+
+static unsigned
+element_count (ffi_type *ty)
+{
+  if (ty->type == FFI_TYPE_STRUCT && ty->elements)
+    {
+      unsigned n;
+      unsigned elems = 0;
+      for (n = 0; ty->elements[n]; n++)
+	{
+	  if (ty->elements[n]->type == FFI_TYPE_STRUCT
+	      && ty->elements[n]->elements)
+	    elems += element_count (ty->elements[n]);
+	  else
+	    elems++;
+	}
+      return elems;
+    }
+  return 0;
+}
+
+/* Test for a homogeneous floating point aggregate.
+
+   A homogeneous floating point aggregate is a homogeneous aggregate of
+   a half- single- or double- precision floating point type with one
+   to four elements.  Note that this includes nested structs of the
+   basic type.  */
+
+static int
+is_hfa (ffi_type *ty)
+{
+  if (ty->type == FFI_TYPE_STRUCT
+      && ty->elements[0]
+      && is_floating_type (get_homogeneous_type (ty)))
+    {
+      unsigned n = element_count (ty);
+      return n >= 1 && n <= 4;
+    }
+  return 0;
+}
+
+/* Test if an ffi_type is a candidate for passing in a register.
+
+   This test does not check that sufficient registers of the
+   appropriate class are actually available, merely that IFF
+   sufficient registers are available then the argument will be passed
+   in register(s).
+
+   Note that an ffi_type that is deemed to be a register candidate
+   will always be returned in registers.
+
+   Returns 1 if a register candidate else 0.  */
+
+static int
+is_register_candidate (ffi_type *ty)
+{
+  switch (ty->type)
+    {
+    case FFI_TYPE_VOID:
+    case FFI_TYPE_FLOAT:
+    case FFI_TYPE_DOUBLE:
+    case FFI_TYPE_LONGDOUBLE:
+    case FFI_TYPE_UINT8:
+    case FFI_TYPE_UINT16:
+    case FFI_TYPE_UINT32:
+    case FFI_TYPE_UINT64:
+    case FFI_TYPE_POINTER:
+    case FFI_TYPE_SINT8:
+    case FFI_TYPE_SINT16:
+    case FFI_TYPE_SINT32:
+    case FFI_TYPE_INT:
+    case FFI_TYPE_SINT64:
+      return 1;
+
+    case FFI_TYPE_STRUCT:
+      if (is_hfa (ty))
+        {
+          return 1;
+        }
+      else if (ty->size > 16)
+        {
+          /* Too large. Will be replaced with a pointer to memory. The
+             pointer MAY be passed in a register, but the value will
+             not. This test specifically fails since the argument will
+             never be passed by value in registers. */
+          return 0;
+        }
+      else
+        {
+          /* Might be passed in registers depending on the number of
+             registers required. */
+          return (ty->size + 7) / 8 < N_X_ARG_REG;
+        }
+      break;
+
+    default:
+      FFI_ASSERT (0);
+      break;
+    }
+
+  return 0;
+}
+
+/* Test if an ffi_type argument or result is a candidate for a vector
+   register.  */
+
+static int
+is_v_register_candidate (ffi_type *ty)
+{
+  return is_floating_type (ty->type)
+	   || (ty->type == FFI_TYPE_STRUCT && is_hfa (ty));
+}
+
+/* Representation of the procedure call argument marshalling
+   state.
+
+   The terse state variable names match the names used in the AARCH64
+   PCS. */
+
+struct arg_state
+{
+  unsigned ngrn;                /* Next general-purpose register number. */
+  unsigned nsrn;                /* Next vector register number. */
+  unsigned nsaa;                /* Next stack offset. */
+};
+
+/* Initialize a procedure call argument marshalling state.  */
+static void
+arg_init (struct arg_state *state, unsigned call_frame_size)
+{
+  state->ngrn = 0;
+  state->nsrn = 0;
+  state->nsaa = 0;
+}
+
+/* Return the number of available consecutive core argument
+   registers.  */
+
+static unsigned
+available_x (struct arg_state *state)
+{
+  return N_X_ARG_REG - state->ngrn;
+}
+
+/* Return the number of available consecutive vector argument
+   registers.  */
+
+static unsigned
+available_v (struct arg_state *state)
+{
+  return N_V_ARG_REG - state->nsrn;
+}
+
+static void *
+allocate_to_x (struct call_context *context, struct arg_state *state)
+{
+  FFI_ASSERT (state->ngrn < N_X_ARG_REG)
+  return get_x_addr (context, (state->ngrn)++);
+}
+
+static void *
+allocate_to_s (struct call_context *context, struct arg_state *state)
+{
+  FFI_ASSERT (state->nsrn < N_V_ARG_REG)
+  return get_s_addr (context, (state->nsrn)++);
+}
+
+static void *
+allocate_to_d (struct call_context *context, struct arg_state *state)
+{
+  FFI_ASSERT (state->nsrn < N_V_ARG_REG)
+  return get_d_addr (context, (state->nsrn)++);
+}
+
+static void *
+allocate_to_v (struct call_context *context, struct arg_state *state)
+{
+  FFI_ASSERT (state->nsrn < N_V_ARG_REG)
+  return get_v_addr (context, (state->nsrn)++);
+}
+
+/* Allocate an aligned slot on the stack and return a pointer to it.  */
+static void *
+allocate_to_stack (struct arg_state *state, void *stack, unsigned alignment,
+		   unsigned size)
+{
+  void *allocation;
+
+  /* Round up the NSAA to the larger of 8 or the natural
+     alignment of the argument's type.  */
+  state->nsaa = ALIGN (state->nsaa, alignment);
+  state->nsaa = ALIGN (state->nsaa, alignment);
+  state->nsaa = ALIGN (state->nsaa, 8);
+
+  allocation = stack + state->nsaa;
+
+  state->nsaa += size;
+  return allocation;
+}
+
+static void
+copy_basic_type (void *dest, void *source, unsigned short type)
+{
+  /* This is neccessary to ensure that basic types are copied
+     sign extended to 64-bits as libffi expects.  */
+  switch (type)
+    {
+    case FFI_TYPE_FLOAT:
+      *(float *) dest = *(float *) source;
+      break;
+    case FFI_TYPE_DOUBLE:
+      *(double *) dest = *(double *) source;
+      break;
+    case FFI_TYPE_LONGDOUBLE:
+      *(long double *) dest = *(long double *) source;
+      break;
+    case FFI_TYPE_UINT8:
+      *(ffi_arg *) dest = *(UINT8 *) source;
+      break;
+    case FFI_TYPE_SINT8:
+      *(ffi_sarg *) dest = *(SINT8 *) source;
+      break;
+    case FFI_TYPE_UINT16:
+      *(ffi_arg *) dest = *(UINT16 *) source;
+      break;
+    case FFI_TYPE_SINT16:
+      *(ffi_sarg *) dest = *(SINT16 *) source;
+      break;
+    case FFI_TYPE_UINT32:
+      *(ffi_arg *) dest = *(UINT32 *) source;
+      break;
+    case FFI_TYPE_INT:
+    case FFI_TYPE_SINT32:
+      *(ffi_sarg *) dest = *(SINT32 *) source;
+      break;
+    case FFI_TYPE_POINTER:
+    case FFI_TYPE_UINT64:
+      *(ffi_arg *) dest = *(UINT64 *) source;
+      break;
+    case FFI_TYPE_SINT64:
+      *(ffi_sarg *) dest = *(SINT64 *) source;
+      break;
+
+    default:
+      FFI_ASSERT (0);
+    }
+}
+
+static void
+copy_hfa_to_reg_or_stack (void *memory,
+			  ffi_type *ty,
+			  struct call_context *context,
+			  unsigned char *stack,
+			  struct arg_state *state)
+{
+  unsigned elems = element_count (ty);
+  if (available_v (state) < elems)
+    {
+      /* There are insufficient V registers. Further V register allocations
+	 are prevented, the NSAA is adjusted (by allocate_to_stack ())
+	 and the argument is copied to memory at the adjusted NSAA.  */
+      state->nsrn = N_V_ARG_REG;
+      memcpy (allocate_to_stack (state, stack, ty->alignment, ty->size),
+	      memory,
+	      ty->size);
+    }
+  else
+    {
+      int i;
+      unsigned short type = get_homogeneous_type (ty);
+      unsigned elems = element_count (ty);
+      for (i = 0; i < elems; i++)
+	{
+	  void *reg = allocate_to_v (context, state);
+	  copy_basic_type (reg, memory, type);
+	  memory += get_basic_type_size (type);
+	}
+    }
+}
+
+/* Either allocate an appropriate register for the argument type, or if
+   none are available, allocate a stack slot and return a pointer
+   to the allocated space.  */
+
+static void *
+allocate_to_register_or_stack (struct call_context *context,
+			       unsigned char *stack,
+			       struct arg_state *state,
+			       unsigned short type)
+{
+  size_t alignment = get_basic_type_alignment (type);
+  size_t size = alignment;
+  switch (type)
+    {
+    case FFI_TYPE_FLOAT:
+      /* This is the only case for which the allocated stack size
+	 should not match the alignment of the type.  */
+      size = sizeof (UINT32);
+      /* Fall through.  */
+    case FFI_TYPE_DOUBLE:
+      if (state->nsrn < N_V_ARG_REG)
+	return allocate_to_d (context, state);
+      state->nsrn = N_V_ARG_REG;
+      break;
+    case FFI_TYPE_LONGDOUBLE:
+      if (state->nsrn < N_V_ARG_REG)
+	return allocate_to_v (context, state);
+      state->nsrn = N_V_ARG_REG;
+      break;
+    case FFI_TYPE_UINT8:
+    case FFI_TYPE_SINT8:
+    case FFI_TYPE_UINT16:
+    case FFI_TYPE_SINT16:
+    case FFI_TYPE_UINT32:
+    case FFI_TYPE_SINT32:
+    case FFI_TYPE_INT:
+    case FFI_TYPE_POINTER:
+    case FFI_TYPE_UINT64:
+    case FFI_TYPE_SINT64:
+      if (state->ngrn < N_X_ARG_REG)
+	return allocate_to_x (context, state);
+      state->ngrn = N_X_ARG_REG;
+      break;
+    default:
+      FFI_ASSERT (0);
+    }
+
+    return allocate_to_stack (state, stack, alignment, size);
+}
+
+/* Copy a value to an appropriate register, or if none are
+   available, to the stack.  */
+
+static void
+copy_to_register_or_stack (struct call_context *context,
+			   unsigned char *stack,
+			   struct arg_state *state,
+			   void *value,
+			   unsigned short type)
+{
+  copy_basic_type (
+	  allocate_to_register_or_stack (context, stack, state, type),
+	  value,
+	  type);
+}
+
+/* Marshall the arguments from FFI representation to procedure call
+   context and stack.  */
+
+static unsigned
+aarch64_prep_args (struct call_context *context, unsigned char *stack,
+		   extended_cif *ecif)
+{
+  int i;
+  struct arg_state state;
+
+  arg_init (&state, ALIGN(ecif->cif->bytes, 16));
+
+  for (i = 0; i < ecif->cif->nargs; i++)
+    {
+      ffi_type *ty = ecif->cif->arg_types[i];
+      switch (ty->type)
+	{
+	case FFI_TYPE_VOID:
+	  FFI_ASSERT (0);
+	  break;
+
+	/* If the argument is a basic type the argument is allocated to an
+	   appropriate register, or if none are available, to the stack.  */
+	case FFI_TYPE_FLOAT:
+	case FFI_TYPE_DOUBLE:
+	case FFI_TYPE_LONGDOUBLE:
+	case FFI_TYPE_UINT8:
+	case FFI_TYPE_SINT8:
+	case FFI_TYPE_UINT16:
+	case FFI_TYPE_SINT16:
+	case FFI_TYPE_UINT32:
+	case FFI_TYPE_INT:
+	case FFI_TYPE_SINT32:
+	case FFI_TYPE_POINTER:
+	case FFI_TYPE_UINT64:
+	case FFI_TYPE_SINT64:
+	  copy_to_register_or_stack (context, stack, &state,
+				     ecif->avalue[i], ty->type);
+	  break;
+
+	case FFI_TYPE_STRUCT:
+	  if (is_hfa (ty))
+	    {
+	      copy_hfa_to_reg_or_stack (ecif->avalue[i], ty, context,
+					stack, &state);
+	    }
+	  else if (ty->size > 16)
+	    {
+	      /* If the argument is a composite type that is larger than 16
+		 bytes, then the argument has been copied to memory, and
+		 the argument is replaced by a pointer to the copy.  */
+
+	      copy_to_register_or_stack (context, stack, &state,
+					 &(ecif->avalue[i]), FFI_TYPE_POINTER);
+	    }
+	  else if (available_x (&state) >= (ty->size + 7) / 8)
+	    {
+	      /* If the argument is a composite type and the size in
+		 double-words is not more than the number of available
+		 X registers, then the argument is copied into consecutive
+		 X registers.  */
+	      int j;
+	      for (j = 0; j < (ty->size + 7) / 8; j++)
+		{
+		  memcpy (allocate_to_x (context, &state),
+			  &(((UINT64 *) ecif->avalue[i])[j]),
+			  sizeof (UINT64));
+		}
+	    }
+	  else
+	    {
+	      /* Otherwise, there are insufficient X registers. Further X
+		 register allocations are prevented, the NSAA is adjusted
+		 (by allocate_to_stack ()) and the argument is copied to
+		 memory at the adjusted NSAA.  */
+	      state.ngrn = N_X_ARG_REG;
+
+	      memcpy (allocate_to_stack (&state, stack, ty->alignment,
+					 ty->size), ecif->avalue + i, ty->size);
+	    }
+	  break;
+
+	default:
+	  FFI_ASSERT (0);
+	  break;
+	}
+    }
+
+  return ecif->cif->aarch64_flags;
+}
+
+ffi_status
+ffi_prep_cif_machdep (ffi_cif *cif)
+{
+  /* Round the stack up to a multiple of the stack alignment requirement. */
+  cif->bytes =
+    (cif->bytes + (AARCH64_STACK_ALIGN - 1)) & ~ (AARCH64_STACK_ALIGN - 1);
+
+  /* Initialize our flags. We are interested if this CIF will touch a
+     vector register, if so we will enable context save and load to
+     those registers, otherwise not. This is intended to be friendly
+     to lazy float context switching in the kernel.  */
+  cif->aarch64_flags = 0;
+
+  if (is_v_register_candidate (cif->rtype))
+    {
+      cif->aarch64_flags |= AARCH64_FFI_WITH_V;
+    }
+  else
+    {
+      int i;
+      for (i = 0; i < cif->nargs; i++)
+        if (is_v_register_candidate (cif->arg_types[i]))
+          {
+            cif->aarch64_flags |= AARCH64_FFI_WITH_V;
+            break;
+          }
+    }
+
+  return FFI_OK;
+}
+
+/* Call a function with the provided arguments and capture the return
+   value.  */
+void
+ffi_call (ffi_cif *cif, void (*fn)(void), void *rvalue, void **avalue)
+{
+  extended_cif ecif;
+
+  ecif.cif = cif;
+  ecif.avalue = avalue;
+  ecif.rvalue = rvalue;
+
+  switch (cif->abi)
+    {
+    case FFI_SYSV:
+      {
+        struct call_context context;
+	unsigned stack_bytes;
+
+	/* Figure out the total amount of stack space we need, the
+	   above call frame space needs to be 16 bytes aligned to
+	   ensure correct alignment of the first object inserted in
+	   that space hence the ALIGN applied to cif->bytes.*/
+	stack_bytes = ALIGN(cif->bytes, 16);
+
+	memset (&context, 0, sizeof (context));
+        if (is_register_candidate (cif->rtype))
+          {
+            ffi_call_SYSV (aarch64_prep_args, &context, &ecif, stack_bytes, fn);
+            switch (cif->rtype->type)
+              {
+              case FFI_TYPE_VOID:
+              case FFI_TYPE_FLOAT:
+              case FFI_TYPE_DOUBLE:
+              case FFI_TYPE_LONGDOUBLE:
+              case FFI_TYPE_UINT8:
+              case FFI_TYPE_SINT8:
+              case FFI_TYPE_UINT16:
+              case FFI_TYPE_SINT16:
+              case FFI_TYPE_UINT32:
+              case FFI_TYPE_SINT32:
+              case FFI_TYPE_POINTER:
+              case FFI_TYPE_UINT64:
+              case FFI_TYPE_INT:
+              case FFI_TYPE_SINT64:
+		{
+		  void *addr = get_basic_type_addr (cif->rtype->type,
+						    &context, 0);
+		  copy_basic_type (rvalue, addr, cif->rtype->type);
+		  break;
+		}
+
+              case FFI_TYPE_STRUCT:
+                if (is_hfa (cif->rtype))
+		  {
+		    int j;
+		    unsigned short type = get_homogeneous_type (cif->rtype);
+		    unsigned elems = element_count (cif->rtype);
+		    for (j = 0; j < elems; j++)
+		      {
+			void *reg = get_basic_type_addr (type, &context, j);
+			copy_basic_type (rvalue, reg, type);
+			rvalue += get_basic_type_size (type);
+		      }
+		  }
+                else if ((cif->rtype->size + 7) / 8 < N_X_ARG_REG)
+                  {
+                    unsigned size = ALIGN (cif->rtype->size, sizeof (UINT64));
+                    memcpy (rvalue, get_x_addr (&context, 0), size);
+                  }
+                else
+                  {
+                    FFI_ASSERT (0);
+                  }
+                break;
+
+              default:
+                FFI_ASSERT (0);
+                break;
+              }
+          }
+        else
+          {
+            memcpy (get_x_addr (&context, 8), &rvalue, sizeof (UINT64));
+            ffi_call_SYSV (aarch64_prep_args, &context, &ecif,
+			   stack_bytes, fn);
+          }
+        break;
+      }
+
+    default:
+      FFI_ASSERT (0);
+      break;
+    }
+}
+
+static unsigned char trampoline [] =
+{ 0x70, 0x00, 0x00, 0x58,	/* ldr	x16, 1f	*/
+  0x91, 0x00, 0x00, 0x10,	/* adr	x17, 2f	*/
+  0x00, 0x02, 0x1f, 0xd6	/* br	x16	*/
+};
+
+/* Build a trampoline.  */
+
+#define FFI_INIT_TRAMPOLINE(TRAMP,FUN,CTX,FLAGS)			\
+  ({unsigned char *__tramp = (unsigned char*)(TRAMP);			\
+    UINT64  __fun = (UINT64)(FUN);					\
+    UINT64  __ctx = (UINT64)(CTX);					\
+    UINT64  __flags = (UINT64)(FLAGS);					\
+    memcpy (__tramp, trampoline, sizeof (trampoline));			\
+    memcpy (__tramp + 12, &__fun, sizeof (__fun));			\
+    memcpy (__tramp + 20, &__ctx, sizeof (__ctx));			\
+    memcpy (__tramp + 28, &__flags, sizeof (__flags));			\
+    __clear_cache(__tramp, __tramp + FFI_TRAMPOLINE_SIZE);		\
+  })
+
+ffi_status
+ffi_prep_closure_loc (ffi_closure* closure,
+                      ffi_cif* cif,
+                      void (*fun)(ffi_cif*,void*,void**,void*),
+                      void *user_data,
+                      void *codeloc)
+{
+  if (cif->abi != FFI_SYSV)
+    return FFI_BAD_ABI;
+
+  FFI_INIT_TRAMPOLINE (&closure->tramp[0], &ffi_closure_SYSV, codeloc,
+		       cif->aarch64_flags);
+
+  closure->cif  = cif;
+  closure->user_data = user_data;
+  closure->fun  = fun;
+
+  return FFI_OK;
+}
+
+/* Primary handler to setup and invoke a function within a closure.
+
+   A closure when invoked enters via the assembler wrapper
+   ffi_closure_SYSV(). The wrapper allocates a call context on the
+   stack, saves the interesting registers (from the perspective of
+   the calling convention) into the context then passes control to
+   ffi_closure_SYSV_inner() passing the saved context and a pointer to
+   the stack at the point ffi_closure_SYSV() was invoked.
+
+   On the return path the assembler wrapper will reload call context
+   regsiters.
+
+   ffi_closure_SYSV_inner() marshalls the call context into ffi value
+   desriptors, invokes the wrapped function, then marshalls the return
+   value back into the call context.  */
+
+void
+ffi_closure_SYSV_inner (ffi_closure *closure, struct call_context *context,
+			void *stack)
+{
+  ffi_cif *cif = closure->cif;
+  void **avalue = (void**) alloca (cif->nargs * sizeof (void*));
+  void *rvalue = NULL;
+  int i;
+  struct arg_state state;
+
+  arg_init (&state, ALIGN(cif->bytes, 16));
+
+  for (i = 0; i < cif->nargs; i++)
+    {
+      ffi_type *ty = cif->arg_types[i];
+
+      switch (ty->type)
+	{
+	case FFI_TYPE_VOID:
+	  FFI_ASSERT (0);
+	  break;
+
+	case FFI_TYPE_UINT8:
+	case FFI_TYPE_SINT8:
+	case FFI_TYPE_UINT16:
+	case FFI_TYPE_SINT16:
+	case FFI_TYPE_UINT32:
+	case FFI_TYPE_SINT32:
+	case FFI_TYPE_INT:
+	case FFI_TYPE_POINTER:
+	case FFI_TYPE_UINT64:
+	case FFI_TYPE_SINT64:
+	case  FFI_TYPE_FLOAT:
+	case  FFI_TYPE_DOUBLE:
+	case  FFI_TYPE_LONGDOUBLE:
+	  avalue[i] = allocate_to_register_or_stack (context, stack,
+						     &state, ty->type);
+	  break;
+
+	case FFI_TYPE_STRUCT:
+	  if (is_hfa (ty))
+	    {
+	      unsigned n = element_count (ty);
+	      if (available_v (&state) < n)
+		{
+		  state.nsrn = N_V_ARG_REG;
+		  avalue[i] = allocate_to_stack (&state, stack, ty->alignment,
+						 ty->size);
+		}
+	      else
+		{
+		  switch (get_homogeneous_type (ty))
+		    {
+		    case FFI_TYPE_FLOAT:
+		      {
+			/* Eeek! We need a pointer to the structure,
+			   however the homogeneous float elements are
+			   being passed in individual S registers,
+			   therefore the structure is not represented as
+			   a contiguous sequence of bytes in our saved
+			   register context. We need to fake up a copy
+			   of the structure layed out in memory
+			   correctly. The fake can be tossed once the
+			   closure function has returned hence alloca()
+			   is sufficient. */
+			int j;
+			UINT32 *p = avalue[i] = alloca (ty->size);
+			for (j = 0; j < element_count (ty); j++)
+			  memcpy (&p[j],
+				  allocate_to_s (context, &state),
+				  sizeof (*p));
+			break;
+		      }
+
+		    case FFI_TYPE_DOUBLE:
+		      {
+			/* Eeek! We need a pointer to the structure,
+			   however the homogeneous float elements are
+			   being passed in individual S registers,
+			   therefore the structure is not represented as
+			   a contiguous sequence of bytes in our saved
+			   register context. We need to fake up a copy
+			   of the structure layed out in memory
+			   correctly. The fake can be tossed once the
+			   closure function has returned hence alloca()
+			   is sufficient. */
+			int j;
+			UINT64 *p = avalue[i] = alloca (ty->size);
+			for (j = 0; j < element_count (ty); j++)
+			  memcpy (&p[j],
+				  allocate_to_d (context, &state),
+				  sizeof (*p));
+			break;
+		      }
+
+		    case FFI_TYPE_LONGDOUBLE:
+			  memcpy (&avalue[i],
+				  allocate_to_v (context, &state),
+				  sizeof (*avalue));
+		      break;
+
+		    default:
+		      FFI_ASSERT (0);
+		      break;
+		    }
+		}
+	    }
+	  else if (ty->size > 16)
+	    {
+	      /* Replace Composite type of size greater than 16 with a
+		 pointer.  */
+	      memcpy (&avalue[i],
+		      allocate_to_register_or_stack (context, stack,
+						     &state, FFI_TYPE_POINTER),
+		      sizeof (avalue[i]));
+	    }
+	  else if (available_x (&state) >= (ty->size + 7) / 8)
+	    {
+	      avalue[i] = get_x_addr (context, state.ngrn);
+	      state.ngrn += (ty->size + 7) / 8;
+	    }
+	  else
+	    {
+	      state.ngrn = N_X_ARG_REG;
+
+	      avalue[i] = allocate_to_stack (&state, stack, ty->alignment,
+					     ty->size);
+	    }
+	  break;
+
+	default:
+	  FFI_ASSERT (0);
+	  break;
+	}
+    }
+
+  /* Figure out where the return value will be passed, either in
+     registers or in a memory block allocated by the caller and passed
+     in x8.  */
+
+  if (is_register_candidate (cif->rtype))
+    {
+      /* Register candidates are *always* returned in registers. */
+
+      /* Allocate a scratchpad for the return value, we will let the
+         callee scrible the result into the scratch pad then move the
+         contents into the appropriate return value location for the
+         call convention.  */
+      rvalue = alloca (cif->rtype->size);
+      (closure->fun) (cif, rvalue, avalue, closure->user_data);
+
+      /* Copy the return value into the call context so that it is returned
+         as expected to our caller.  */
+      switch (cif->rtype->type)
+        {
+        case FFI_TYPE_VOID:
+          break;
+
+        case FFI_TYPE_UINT8:
+        case FFI_TYPE_UINT16:
+        case FFI_TYPE_UINT32:
+        case FFI_TYPE_POINTER:
+        case FFI_TYPE_UINT64:
+        case FFI_TYPE_SINT8:
+        case FFI_TYPE_SINT16:
+        case FFI_TYPE_INT:
+        case FFI_TYPE_SINT32:
+        case FFI_TYPE_SINT64:
+        case FFI_TYPE_FLOAT:
+        case FFI_TYPE_DOUBLE:
+        case FFI_TYPE_LONGDOUBLE:
+	  {
+	    void *addr = get_basic_type_addr (cif->rtype->type, context, 0);
+	    copy_basic_type (addr, rvalue, cif->rtype->type);
+            break;
+	  }
+        case FFI_TYPE_STRUCT:
+          if (is_hfa (cif->rtype))
+	    {
+	      int i;
+	      unsigned short type = get_homogeneous_type (cif->rtype);
+	      unsigned elems = element_count (cif->rtype);
+	      for (i = 0; i < elems; i++)
+		{
+		  void *reg = get_basic_type_addr (type, context, i);
+		  copy_basic_type (reg, rvalue, type);
+		  rvalue += get_basic_type_size (type);
+		}
+	    }
+          else if ((cif->rtype->size + 7) / 8 < N_X_ARG_REG)
+            {
+              unsigned size = ALIGN (cif->rtype->size, sizeof (UINT64)) ;
+              memcpy (get_x_addr (context, 0), rvalue, size);
+            }
+          else
+            {
+              FFI_ASSERT (0);
+            }
+          break;
+        default:
+          FFI_ASSERT (0);
+          break;
+        }
+    }
+  else
+    {
+      memcpy (&rvalue, get_x_addr (context, 8), sizeof (UINT64));
+      (closure->fun) (cif, rvalue, avalue, closure->user_data);
+    }
+}
+
diff --git a/Modules/_ctypes/libffi/src/aarch64/ffitarget.h b/Modules/_ctypes/libffi/src/aarch64/ffitarget.h
new file mode 100644
index 0000000..6f1a348
--- /dev/null
+++ b/Modules/_ctypes/libffi/src/aarch64/ffitarget.h
@@ -0,0 +1,59 @@
+/* Copyright (c) 2009, 2010, 2011, 2012 ARM Ltd.
+
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+``Software''), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  */
+
+#ifndef LIBFFI_TARGET_H
+#define LIBFFI_TARGET_H
+
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
+#ifndef LIBFFI_ASM
+typedef unsigned long ffi_arg;
+typedef signed long ffi_sarg;
+
+typedef enum ffi_abi
+  {
+    FFI_FIRST_ABI = 0,
+    FFI_SYSV,
+    FFI_LAST_ABI,
+    FFI_DEFAULT_ABI = FFI_SYSV
+  } ffi_abi;
+#endif
+
+/* ---- Definitions for closures ----------------------------------------- */
+
+#define FFI_CLOSURES 1
+#define FFI_TRAMPOLINE_SIZE 36
+#define FFI_NATIVE_RAW_API 0
+
+/* ---- Internal ---- */
+
+
+#define FFI_EXTRA_CIF_FIELDS unsigned aarch64_flags
+
+#define AARCH64_FFI_WITH_V_BIT 0
+
+#define AARCH64_N_XREG 32
+#define AARCH64_N_VREG 32
+#define AARCH64_CALL_CONTEXT_SIZE (AARCH64_N_XREG * 8 + AARCH64_N_VREG * 16)
+
+#endif
diff --git a/Modules/_ctypes/libffi/src/aarch64/sysv.S b/Modules/_ctypes/libffi/src/aarch64/sysv.S
new file mode 100644
index 0000000..b8cd421
--- /dev/null
+++ b/Modules/_ctypes/libffi/src/aarch64/sysv.S
@@ -0,0 +1,307 @@
+/* Copyright (c) 2009, 2010, 2011, 2012 ARM Ltd.
+
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+``Software''), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  */
+
+#define LIBFFI_ASM
+#include <fficonfig.h>
+#include <ffi.h>
+
+#define cfi_adjust_cfa_offset(off)	.cfi_adjust_cfa_offset off
+#define cfi_rel_offset(reg, off)	.cfi_rel_offset reg, off
+#define cfi_restore(reg)		.cfi_restore reg
+#define cfi_def_cfa_register(reg)	.cfi_def_cfa_register reg
+
+        .text
+        .globl ffi_call_SYSV
+        .type ffi_call_SYSV, #function
+
+/* ffi_call_SYSV()
+
+   Create a stack frame, setup an argument context, call the callee
+   and extract the result.
+
+   The maximum required argument stack size is provided,
+   ffi_call_SYSV() allocates that stack space then calls the
+   prepare_fn to populate register context and stack.  The
+   argument passing registers are loaded from the register
+   context and the callee called, on return the register passing
+   register are saved back to the context.  Our caller will
+   extract the return value from the final state of the saved
+   register context.
+
+   Prototype:
+
+   extern unsigned
+   ffi_call_SYSV (void (*)(struct call_context *context, unsigned char *,
+			   extended_cif *),
+                  struct call_context *context,
+                  extended_cif *,
+                  unsigned required_stack_size,
+                  void (*fn)(void));
+
+   Therefore on entry we have:
+
+   x0 prepare_fn
+   x1 &context
+   x2 &ecif
+   x3 bytes
+   x4 fn
+
+   This function uses the following stack frame layout:
+
+   ==
+                saved x30(lr)
+   x29(fp)->    saved x29(fp)
+                saved x24
+                saved x23
+                saved x22
+   sp'    ->    saved x21
+                ...
+   sp     ->    (constructed callee stack arguments)
+   ==
+
+   Voila! */
+
+#define ffi_call_SYSV_FS (8 * 4)
+
+        .cfi_startproc
+ffi_call_SYSV:
+        stp     x29, x30, [sp, #-16]!
+	cfi_adjust_cfa_offset (16)
+        cfi_rel_offset (x29, 0)
+        cfi_rel_offset (x30, 8)
+
+        mov     x29, sp
+	cfi_def_cfa_register (x29)
+        sub     sp, sp, #ffi_call_SYSV_FS
+
+        stp     x21, x22, [sp, 0]
+        cfi_rel_offset (x21, 0 - ffi_call_SYSV_FS)
+        cfi_rel_offset (x22, 8 - ffi_call_SYSV_FS)
+
+        stp     x23, x24, [sp, 16]
+        cfi_rel_offset (x23, 16 - ffi_call_SYSV_FS)
+        cfi_rel_offset (x24, 24 - ffi_call_SYSV_FS)
+
+        mov     x21, x1
+        mov     x22, x2
+        mov     x24, x4
+
+        /* Allocate the stack space for the actual arguments, many
+           arguments will be passed in registers, but we assume
+           worst case and allocate sufficient stack for ALL of
+           the arguments.  */
+        sub     sp, sp, x3
+
+        /* unsigned (*prepare_fn) (struct call_context *context,
+				   unsigned char *stack, extended_cif *ecif);
+	 */
+        mov     x23, x0
+        mov     x0, x1
+        mov     x1, sp
+        /* x2 already in place */
+        blr     x23
+
+        /* Preserve the flags returned.  */
+        mov     x23, x0
+
+        /* Figure out if we should touch the vector registers.  */
+        tbz     x23, #AARCH64_FFI_WITH_V_BIT, 1f
+
+        /* Load the vector argument passing registers.  */
+        ldp     q0, q1, [x21, #8*32 +  0]
+        ldp     q2, q3, [x21, #8*32 + 32]
+        ldp     q4, q5, [x21, #8*32 + 64]
+        ldp     q6, q7, [x21, #8*32 + 96]
+1:
+        /* Load the core argument passing registers.  */
+        ldp     x0, x1, [x21,  #0]
+        ldp     x2, x3, [x21, #16]
+        ldp     x4, x5, [x21, #32]
+        ldp     x6, x7, [x21, #48]
+
+        /* Don't forget x8 which may be holding the address of a return buffer.
+	 */
+        ldr     x8,     [x21, #8*8]
+
+        blr     x24
+
+        /* Save the core argument passing registers.  */
+        stp     x0, x1, [x21,  #0]
+        stp     x2, x3, [x21, #16]
+        stp     x4, x5, [x21, #32]
+        stp     x6, x7, [x21, #48]
+
+        /* Note nothing useful ever comes back in x8!  */
+
+        /* Figure out if we should touch the vector registers.  */
+        tbz     x23, #AARCH64_FFI_WITH_V_BIT, 1f
+
+        /* Save the vector argument passing registers.  */
+        stp     q0, q1, [x21, #8*32 + 0]
+        stp     q2, q3, [x21, #8*32 + 32]
+        stp     q4, q5, [x21, #8*32 + 64]
+        stp     q6, q7, [x21, #8*32 + 96]
+1:
+        /* All done, unwind our stack frame.  */
+        ldp     x21, x22, [x29,  # - ffi_call_SYSV_FS]
+        cfi_restore (x21)
+        cfi_restore (x22)
+
+        ldp     x23, x24, [x29,  # - ffi_call_SYSV_FS + 16]
+        cfi_restore (x23)
+        cfi_restore (x24)
+
+        mov     sp, x29
+	cfi_def_cfa_register (sp)
+
+        ldp     x29, x30, [sp], #16
+	cfi_adjust_cfa_offset (-16)
+        cfi_restore (x29)
+        cfi_restore (x30)
+
+        ret
+
+        .cfi_endproc
+        .size ffi_call_SYSV, .-ffi_call_SYSV
+
+#define ffi_closure_SYSV_FS (8 * 2 + AARCH64_CALL_CONTEXT_SIZE)
+
+/* ffi_closure_SYSV
+
+   Closure invocation glue. This is the low level code invoked directly by
+   the closure trampoline to setup and call a closure.
+
+   On entry x17 points to a struct trampoline_data, x16 has been clobbered
+   all other registers are preserved.
+
+   We allocate a call context and save the argument passing registers,
+   then invoked the generic C ffi_closure_SYSV_inner() function to do all
+   the real work, on return we load the result passing registers back from
+   the call context.
+
+   On entry
+
+   extern void
+   ffi_closure_SYSV (struct trampoline_data *);
+
+   struct trampoline_data
+   {
+        UINT64 *ffi_closure;
+        UINT64 flags;
+   };
+
+   This function uses the following stack frame layout:
+
+   ==
+                saved x30(lr)
+   x29(fp)->    saved x29(fp)
+                saved x22
+                saved x21
+                ...
+   sp     ->    call_context
+   ==
+
+   Voila!  */
+
+        .text
+        .globl ffi_closure_SYSV
+        .cfi_startproc
+ffi_closure_SYSV:
+        stp     x29, x30, [sp, #-16]!
+	cfi_adjust_cfa_offset (16)
+        cfi_rel_offset (x29, 0)
+        cfi_rel_offset (x30, 8)
+
+        mov     x29, sp
+
+        sub     sp, sp, #ffi_closure_SYSV_FS
+	cfi_adjust_cfa_offset (ffi_closure_SYSV_FS)
+
+        stp     x21, x22, [x29, #-16]
+        cfi_rel_offset (x21, 0)
+        cfi_rel_offset (x22, 8)
+
+        /* Load x21 with &call_context.  */
+        mov     x21, sp
+        /* Preserve our struct trampoline_data *  */
+        mov     x22, x17
+
+        /* Save the rest of the argument passing registers.  */
+        stp     x0, x1, [x21, #0]
+        stp     x2, x3, [x21, #16]
+        stp     x4, x5, [x21, #32]
+        stp     x6, x7, [x21, #48]
+        /* Don't forget we may have been given a result scratch pad address.
+	 */
+        str     x8,     [x21, #64]
+
+        /* Figure out if we should touch the vector registers.  */
+        ldr     x0, [x22, #8]
+        tbz     x0, #AARCH64_FFI_WITH_V_BIT, 1f
+
+        /* Save the argument passing vector registers.  */
+        stp     q0, q1, [x21, #8*32 + 0]
+        stp     q2, q3, [x21, #8*32 + 32]
+        stp     q4, q5, [x21, #8*32 + 64]
+        stp     q6, q7, [x21, #8*32 + 96]
+1:
+        /* Load &ffi_closure..  */
+        ldr     x0, [x22, #0]
+        mov     x1, x21
+        /* Compute the location of the stack at the point that the
+           trampoline was called.  */
+        add     x2, x29, #16
+
+        bl      ffi_closure_SYSV_inner
+
+        /* Figure out if we should touch the vector registers.  */
+        ldr     x0, [x22, #8]
+        tbz     x0, #AARCH64_FFI_WITH_V_BIT, 1f
+
+        /* Load the result passing vector registers.  */
+        ldp     q0, q1, [x21, #8*32 + 0]
+        ldp     q2, q3, [x21, #8*32 + 32]
+        ldp     q4, q5, [x21, #8*32 + 64]
+        ldp     q6, q7, [x21, #8*32 + 96]
+1:
+        /* Load the result passing core registers.  */
+        ldp     x0, x1, [x21,  #0]
+        ldp     x2, x3, [x21, #16]
+        ldp     x4, x5, [x21, #32]
+        ldp     x6, x7, [x21, #48]
+        /* Note nothing usefull is returned in x8.  */
+
+        /* We are done, unwind our frame.  */
+        ldp     x21, x22, [x29,  #-16]
+        cfi_restore (x21)
+        cfi_restore (x22)
+
+        mov     sp, x29
+	cfi_adjust_cfa_offset (-ffi_closure_SYSV_FS)
+
+        ldp     x29, x30, [sp], #16
+	cfi_adjust_cfa_offset (-16)
+        cfi_restore (x29)
+        cfi_restore (x30)
+
+        ret
+        .cfi_endproc
+        .size ffi_closure_SYSV, .-ffi_closure_SYSV
diff --git a/Modules/_ctypes/libffi/src/alpha/ffi.c b/Modules/_ctypes/libffi/src/alpha/ffi.c
index 8d6b2ba..192f691 100644
--- a/Modules/_ctypes/libffi/src/alpha/ffi.c
+++ b/Modules/_ctypes/libffi/src/alpha/ffi.c
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------------
-   ffi.c - Copyright (c) 1998, 2001, 2007, 2008  Red Hat, Inc.
+   ffi.c - Copyright (c) 2012  Anthony Green
+           Copyright (c) 1998, 2001, 2007, 2008  Red Hat, Inc.
    
    Alpha Foreign Function Interface 
 
@@ -178,6 +179,9 @@
 {
   unsigned int *tramp;
 
+  if (cif->abi != FFI_OSF)
+    return FFI_BAD_ABI;
+
   tramp = (unsigned int *) &closure->tramp[0];
   tramp[0] = 0x47fb0401;	/* mov $27,$1		*/
   tramp[1] = 0xa77b0010;	/* ldq $27,16($27)	*/
diff --git a/Modules/_ctypes/libffi/src/alpha/ffitarget.h b/Modules/_ctypes/libffi/src/alpha/ffitarget.h
index 7d06eb0..af145bc 100644
--- a/Modules/_ctypes/libffi/src/alpha/ffitarget.h
+++ b/Modules/_ctypes/libffi/src/alpha/ffitarget.h
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003  Red Hat, Inc.
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 1996-2003  Red Hat, Inc.
    Target configuration macros for Alpha.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -27,6 +28,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 #ifndef LIBFFI_ASM
 typedef unsigned long          ffi_arg;
 typedef signed long            ffi_sarg;
diff --git a/Modules/_ctypes/libffi/src/alpha/osf.S b/Modules/_ctypes/libffi/src/alpha/osf.S
index d0e7782..6b9f4df 100644
--- a/Modules/_ctypes/libffi/src/alpha/osf.S
+++ b/Modules/_ctypes/libffi/src/alpha/osf.S
@@ -1,5 +1,5 @@
 /* -----------------------------------------------------------------------
-   osf.S - Copyright (c) 1998, 2001, 2007, 2008 Red Hat
+   osf.S - Copyright (c) 1998, 2001, 2007, 2008, 2011 Red Hat
    
    Alpha/OSF Foreign Function Interface 
 
@@ -299,33 +299,51 @@
 #endif
 
 #ifdef __ELF__
+# define UA_SI		.4byte
+# define FDE_ENCODING	0x1b	/* pcrel sdata4 */
+# define FDE_ENCODE(X)	.4byte X-.
+# define FDE_ARANGE(X)	.4byte X
+#elif defined __osf__
+# define UA_SI		.align 0; .long
+# define FDE_ENCODING	0x50	/* aligned absolute */
+# define FDE_ENCODE(X)	.align 3; .quad X
+# define FDE_ARANGE(X)	.align 0; .quad X
+#endif
+
+#ifdef __ELF__
 	.section	.eh_frame,EH_FRAME_FLAGS,@progbits
+#elif defined __osf__
+	.data
+	.align 3
+	.globl _GLOBAL__F_ffi_call_osf
+_GLOBAL__F_ffi_call_osf:
+#endif
 __FRAME_BEGIN__:
-	.4byte	$LECIE1-$LSCIE1	# Length of Common Information Entry
+	UA_SI	$LECIE1-$LSCIE1	# Length of Common Information Entry
 $LSCIE1:
-	.4byte	0x0		# CIE Identifier Tag
+	UA_SI	0x0		# CIE Identifier Tag
 	.byte	0x1		# CIE Version
 	.ascii "zR\0"		# CIE Augmentation
 	.byte	0x1		# uleb128 0x1; CIE Code Alignment Factor
 	.byte	0x78		# sleb128 -8; CIE Data Alignment Factor
 	.byte	26		# CIE RA Column
 	.byte	0x1		# uleb128 0x1; Augmentation size
-	.byte	0x1b		# FDE Encoding (pcrel sdata4)
+	.byte	FDE_ENCODING	# FDE Encoding
 	.byte	0xc		# DW_CFA_def_cfa
 	.byte	30		# uleb128 column 30
 	.byte	0		# uleb128 offset 0
 	.align 3
 $LECIE1:
 $LSFDE1:
-	.4byte	$LEFDE1-$LASFDE1		# FDE Length
+	UA_SI	$LEFDE1-$LASFDE1		# FDE Length
 $LASFDE1:
-	.4byte	$LASFDE1-__FRAME_BEGIN__	# FDE CIE offset
-	.4byte	$LFB1-.		# FDE initial location
-	.4byte	$LFE1-$LFB1	# FDE address range
+	UA_SI	$LASFDE1-__FRAME_BEGIN__	# FDE CIE offset
+	FDE_ENCODE($LFB1)			# FDE initial location
+	FDE_ARANGE($LFE1-$LFB1)			# FDE address range
 	.byte	0x0		# uleb128 0x0; Augmentation size
 
 	.byte	0x4		# DW_CFA_advance_loc4
-	.4byte	$LCFI1-$LFB1
+	UA_SI	$LCFI1-$LFB1
 	.byte	0x9a		# DW_CFA_offset, column 26
 	.byte	4		# uleb128 4*-8
 	.byte	0x8f		# DW_CFA_offset, column 15
@@ -335,32 +353,35 @@
 	.byte	32		# uleb128 offset 32
 
 	.byte	0x4		# DW_CFA_advance_loc4
-	.4byte	$LCFI2-$LCFI1
+	UA_SI	$LCFI2-$LCFI1
 	.byte	0xda		# DW_CFA_restore, column 26
 	.align 3
 $LEFDE1:
 
 $LSFDE3:
-	.4byte	$LEFDE3-$LASFDE3		# FDE Length
+	UA_SI	$LEFDE3-$LASFDE3		# FDE Length
 $LASFDE3:
-	.4byte	$LASFDE3-__FRAME_BEGIN__	# FDE CIE offset
-	.4byte	$LFB2-.		# FDE initial location
-	.4byte	$LFE2-$LFB2	# FDE address range
+	UA_SI	$LASFDE3-__FRAME_BEGIN__	# FDE CIE offset
+	FDE_ENCODE($LFB2)			# FDE initial location
+	FDE_ARANGE($LFE2-$LFB2)			# FDE address range
 	.byte	0x0		# uleb128 0x0; Augmentation size
 
 	.byte	0x4		# DW_CFA_advance_loc4
-	.4byte	$LCFI5-$LFB2
+	UA_SI	$LCFI5-$LFB2
 	.byte	0xe		# DW_CFA_def_cfa_offset
 	.byte	0x80,0x1	# uleb128 128
 
 	.byte	0x4		# DW_CFA_advance_loc4
-	.4byte	$LCFI6-$LCFI5
+	UA_SI	$LCFI6-$LCFI5
 	.byte	0x9a		# DW_CFA_offset, column 26
 	.byte	16		# uleb128 offset 16*-8
 	.align 3
 $LEFDE3:
-
-#ifdef __linux__
-	.section	.note.GNU-stack,"",@progbits
+#if defined __osf__
+	.align 0
+	.long	0		# End of Table
 #endif
+
+#if defined __ELF__ && defined __linux__
+	.section	.note.GNU-stack,"",@progbits
 #endif
diff --git a/Modules/_ctypes/libffi/src/arm/ffi.c b/Modules/_ctypes/libffi/src/arm/ffi.c
index f6a6475..3ccceb9 100644
--- a/Modules/_ctypes/libffi/src/arm/ffi.c
+++ b/Modules/_ctypes/libffi/src/arm/ffi.c
@@ -1,6 +1,10 @@
 /* -----------------------------------------------------------------------
-   ffi.c - Copyright (c) 1998, 2008  Red Hat, Inc.
-   
+   ffi.c - Copyright (c) 2011 Timothy Wall
+           Copyright (c) 2011 Plausible Labs Cooperative, Inc.
+           Copyright (c) 2011 Anthony Green
+	   Copyright (c) 2011 Free Software Foundation
+           Copyright (c) 1998, 2008, 2011  Red Hat, Inc.
+	   
    ARM Foreign Function Interface 
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -29,12 +33,20 @@
 
 #include <stdlib.h>
 
-/* ffi_prep_args is called by the assembly routine once stack space
-   has been allocated for the function's arguments */
+/* Forward declares. */
+static int vfp_type_p (ffi_type *);
+static void layout_vfp_args (ffi_cif *);
 
-void ffi_prep_args(char *stack, extended_cif *ecif)
+/* ffi_prep_args is called by the assembly routine once stack space
+   has been allocated for the function's arguments
+   
+   The vfp_space parameter is the load area for VFP regs, the return
+   value is cif->vfp_used (word bitset of VFP regs used for passing
+   arguments). These are only used for the VFP hard-float ABI.
+*/
+int ffi_prep_args(char *stack, extended_cif *ecif, float *vfp_space)
 {
-  register unsigned int i;
+  register unsigned int i, vi = 0;
   register void **p_argv;
   register char *argp;
   register ffi_type **p_arg;
@@ -53,10 +65,31 @@
        i--, p_arg++)
     {
       size_t z;
+      size_t alignment;
+
+      /* Allocated in VFP registers. */
+      if (ecif->cif->abi == FFI_VFP
+	  && vi < ecif->cif->vfp_nargs && vfp_type_p (*p_arg))
+	{
+	  float* vfp_slot = vfp_space + ecif->cif->vfp_args[vi++];
+	  if ((*p_arg)->type == FFI_TYPE_FLOAT)
+	    *((float*)vfp_slot) = *((float*)*p_argv);
+	  else if ((*p_arg)->type == FFI_TYPE_DOUBLE)
+	    *((double*)vfp_slot) = *((double*)*p_argv);
+	  else
+	    memcpy(vfp_slot, *p_argv, (*p_arg)->size);
+	  p_argv++;
+	  continue;
+	}
 
       /* Align if necessary */
-      if (((*p_arg)->alignment - 1) & (unsigned) argp) {
-	argp = (char *) ALIGN(argp, (*p_arg)->alignment);
+      alignment = (*p_arg)->alignment;
+#ifdef _WIN32_WCE
+      if (alignment > 4)
+	alignment = 4;
+#endif
+      if ((alignment - 1) & (unsigned) argp) {
+	argp = (char *) ALIGN(argp, alignment);
       }
 
       if ((*p_arg)->type == FFI_TYPE_STRUCT)
@@ -103,13 +136,15 @@
 	  p_argv++;
 	  argp += z;
     }
-  
-  return;
+
+  /* Indicate the VFP registers used. */
+  return ecif->cif->vfp_used;
 }
 
 /* Perform machine dependent cif processing */
 ffi_status ffi_prep_cif_machdep(ffi_cif *cif)
 {
+  int type_code;
   /* Round the stack up to a multiple of 8 bytes.  This isn't needed 
      everywhere, but it is on some platforms, and it doesn't harm anything
      when it isn't needed.  */
@@ -130,7 +165,14 @@
       break;
 
     case FFI_TYPE_STRUCT:
-      if (cif->rtype->size <= 4)
+      if (cif->abi == FFI_VFP
+	  && (type_code = vfp_type_p (cif->rtype)) != 0)
+	{
+	  /* A Composite Type passed in VFP registers, either
+	     FFI_TYPE_STRUCT_VFP_FLOAT or FFI_TYPE_STRUCT_VFP_DOUBLE. */
+	  cif->flags = (unsigned) type_code;
+	}
+      else if (cif->rtype->size <= 4)
 	/* A Composite Type not larger than 4 bytes is returned in r0.  */
 	cif->flags = (unsigned)FFI_TYPE_INT;
       else
@@ -145,11 +187,30 @@
       break;
     }
 
+  /* Map out the register placements of VFP register args.
+     The VFP hard-float calling conventions are slightly more sophisticated than
+     the base calling conventions, so we do it here instead of in ffi_prep_args(). */
+  if (cif->abi == FFI_VFP)
+    layout_vfp_args (cif);
+
   return FFI_OK;
 }
 
-extern void ffi_call_SYSV(void (*)(char *, extended_cif *), extended_cif *,
-			  unsigned, unsigned, unsigned *, void (*fn)(void));
+/* Perform machine dependent cif processing for variadic calls */
+ffi_status ffi_prep_cif_machdep_var(ffi_cif *cif,
+				    unsigned int nfixedargs,
+				    unsigned int ntotalargs)
+{
+  /* VFP variadic calls actually use the SYSV ABI */
+  if (cif->abi == FFI_VFP)
+	cif->abi = FFI_SYSV;
+
+  return ffi_prep_cif_machdep(cif);
+}
+
+/* Prototypes for assembly functions, in sysv.S */
+extern void ffi_call_SYSV (void (*fn)(void), extended_cif *, unsigned, unsigned, unsigned *);
+extern void ffi_call_VFP (void (*fn)(void), extended_cif *, unsigned, unsigned, unsigned *);
 
 void ffi_call(ffi_cif *cif, void (*fn)(void), void *rvalue, void **avalue)
 {
@@ -157,6 +218,8 @@
 
   int small_struct = (cif->flags == FFI_TYPE_INT 
 		      && cif->rtype->type == FFI_TYPE_STRUCT);
+  int vfp_struct = (cif->flags == FFI_TYPE_STRUCT_VFP_FLOAT
+		    || cif->flags == FFI_TYPE_STRUCT_VFP_DOUBLE);
 
   ecif.cif = cif;
   ecif.avalue = avalue;
@@ -173,38 +236,53 @@
     }
   else if (small_struct)
     ecif.rvalue = &temp;
+  else if (vfp_struct)
+    {
+      /* Largest case is double x 4. */
+      ecif.rvalue = alloca(32);
+    }
   else
     ecif.rvalue = rvalue;
 
   switch (cif->abi) 
     {
     case FFI_SYSV:
-      ffi_call_SYSV(ffi_prep_args, &ecif, cif->bytes, cif->flags, ecif.rvalue,
-		    fn);
-
+      ffi_call_SYSV (fn, &ecif, cif->bytes, cif->flags, ecif.rvalue);
       break;
+
+    case FFI_VFP:
+#ifdef __ARM_EABI__
+      ffi_call_VFP (fn, &ecif, cif->bytes, cif->flags, ecif.rvalue);
+      break;
+#endif
+
     default:
       FFI_ASSERT(0);
       break;
     }
   if (small_struct)
     memcpy (rvalue, &temp, cif->rtype->size);
+  else if (vfp_struct)
+    memcpy (rvalue, ecif.rvalue, cif->rtype->size);
 }
 
 /** private members **/
 
 static void ffi_prep_incoming_args_SYSV (char *stack, void **ret,
-					 void** args, ffi_cif* cif);
+					 void** args, ffi_cif* cif, float *vfp_stack);
 
 void ffi_closure_SYSV (ffi_closure *);
 
+void ffi_closure_VFP (ffi_closure *);
+
 /* This function is jumped to by the trampoline */
 
 unsigned int
-ffi_closure_SYSV_inner (closure, respp, args)
+ffi_closure_SYSV_inner (closure, respp, args, vfp_args)
      ffi_closure *closure;
      void **respp;
      void *args;
+     void *vfp_args;
 {
   // our various things...
   ffi_cif       *cif;
@@ -219,7 +297,7 @@
    * a structure, it will re-set RESP to point to the
    * structure return address.  */
 
-  ffi_prep_incoming_args_SYSV(args, respp, arg_area, cif);
+  ffi_prep_incoming_args_SYSV(args, respp, arg_area, cif, vfp_args);
 
   (closure->fun) (cif, *respp, arg_area, closure->user_data);
 
@@ -229,10 +307,12 @@
 /*@-exportheader@*/
 static void 
 ffi_prep_incoming_args_SYSV(char *stack, void **rvalue,
-			    void **avalue, ffi_cif *cif)
+			    void **avalue, ffi_cif *cif,
+			    /* Used only under VFP hard-float ABI. */
+			    float *vfp_stack)
 /*@=exportheader@*/
 {
-  register unsigned int i;
+  register unsigned int i, vi = 0;
   register void **p_argv;
   register char *argp;
   register ffi_type **p_arg;
@@ -249,10 +329,23 @@
   for (i = cif->nargs, p_arg = cif->arg_types; (i != 0); i--, p_arg++)
     {
       size_t z;
+      size_t alignment;
+  
+      if (cif->abi == FFI_VFP
+	  && vi < cif->vfp_nargs && vfp_type_p (*p_arg))
+	{
+	  *p_argv++ = (void*)(vfp_stack + cif->vfp_args[vi++]);
+	  continue;
+	}
 
-      size_t alignment = (*p_arg)->alignment;
+      alignment = (*p_arg)->alignment;
       if (alignment < 4)
 	alignment = 4;
+#ifdef _WIN32_WCE
+      else
+	if (alignment > 4)
+	  alignment = 4;
+#endif
       /* Align if necessary */
       if ((alignment - 1) & (unsigned) argp) {
 	argp = (char *) ALIGN(argp, alignment);
@@ -273,18 +366,237 @@
 
 /* How to make a trampoline.  */
 
+extern unsigned int ffi_arm_trampoline[3];
+
+#if FFI_EXEC_TRAMPOLINE_TABLE
+
+#include <mach/mach.h>
+#include <pthread.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+extern void *ffi_closure_trampoline_table_page;
+
+typedef struct ffi_trampoline_table ffi_trampoline_table;
+typedef struct ffi_trampoline_table_entry ffi_trampoline_table_entry;
+
+struct ffi_trampoline_table {
+  /* contigious writable and executable pages */
+  vm_address_t config_page;
+  vm_address_t trampoline_page;
+
+  /* free list tracking */
+  uint16_t free_count;
+  ffi_trampoline_table_entry *free_list;
+  ffi_trampoline_table_entry *free_list_pool;
+
+  ffi_trampoline_table *prev;
+  ffi_trampoline_table *next;
+};
+
+struct ffi_trampoline_table_entry {
+  void *(*trampoline)();
+  ffi_trampoline_table_entry *next;
+};
+
+/* Override the standard architecture trampoline size */
+// XXX TODO - Fix
+#undef FFI_TRAMPOLINE_SIZE
+#define FFI_TRAMPOLINE_SIZE 12
+
+/* The trampoline configuration is placed at 4080 bytes prior to the trampoline's entry point */
+#define FFI_TRAMPOLINE_CODELOC_CONFIG(codeloc) ((void **) (((uint8_t *) codeloc) - 4080));
+
+/* The first 16 bytes of the config page are unused, as they are unaddressable from the trampoline page. */
+#define FFI_TRAMPOLINE_CONFIG_PAGE_OFFSET 16
+
+/* Total number of trampolines that fit in one trampoline table */
+#define FFI_TRAMPOLINE_COUNT ((PAGE_SIZE - FFI_TRAMPOLINE_CONFIG_PAGE_OFFSET) / FFI_TRAMPOLINE_SIZE)
+
+static pthread_mutex_t ffi_trampoline_lock = PTHREAD_MUTEX_INITIALIZER;
+static ffi_trampoline_table *ffi_trampoline_tables = NULL;
+
+static ffi_trampoline_table *
+ffi_trampoline_table_alloc ()
+{
+  ffi_trampoline_table *table = NULL;
+
+  /* Loop until we can allocate two contigious pages */
+  while (table == NULL) {
+    vm_address_t config_page = 0x0;
+    kern_return_t kt;
+
+    /* Try to allocate two pages */
+    kt = vm_allocate (mach_task_self (), &config_page, PAGE_SIZE*2, VM_FLAGS_ANYWHERE);
+    if (kt != KERN_SUCCESS) {
+      fprintf(stderr, "vm_allocate() failure: %d at %s:%d\n", kt, __FILE__, __LINE__);
+      break;
+    }
+
+    /* Now drop the second half of the allocation to make room for the trampoline table */
+    vm_address_t trampoline_page = config_page+PAGE_SIZE;
+    kt = vm_deallocate (mach_task_self (), trampoline_page, PAGE_SIZE);
+    if (kt != KERN_SUCCESS) {
+      fprintf(stderr, "vm_deallocate() failure: %d at %s:%d\n", kt, __FILE__, __LINE__);
+      break;
+    }
+
+    /* Remap the trampoline table to directly follow the config page */
+    vm_prot_t cur_prot;
+    vm_prot_t max_prot;
+
+    kt = vm_remap (mach_task_self (), &trampoline_page, PAGE_SIZE, 0x0, FALSE, mach_task_self (), (vm_address_t) &ffi_closure_trampoline_table_page, FALSE, &cur_prot, &max_prot, VM_INHERIT_SHARE);
+
+    /* If we lost access to the destination trampoline page, drop our config allocation mapping and retry */
+    if (kt != KERN_SUCCESS) {
+      /* Log unexpected failures */
+      if (kt != KERN_NO_SPACE) {
+        fprintf(stderr, "vm_remap() failure: %d at %s:%d\n", kt, __FILE__, __LINE__);
+      }
+
+      vm_deallocate (mach_task_self (), config_page, PAGE_SIZE);
+      continue;
+    }
+
+    /* We have valid trampoline and config pages */
+    table = calloc (1, sizeof(ffi_trampoline_table));
+    table->free_count = FFI_TRAMPOLINE_COUNT;
+    table->config_page = config_page;
+    table->trampoline_page = trampoline_page;
+
+    /* Create and initialize the free list */
+    table->free_list_pool = calloc(FFI_TRAMPOLINE_COUNT, sizeof(ffi_trampoline_table_entry));
+
+    uint16_t i;
+    for (i = 0; i < table->free_count; i++) {
+      ffi_trampoline_table_entry *entry = &table->free_list_pool[i];
+      entry->trampoline = (void *) (table->trampoline_page + (i * FFI_TRAMPOLINE_SIZE));
+
+      if (i < table->free_count - 1)
+        entry->next = &table->free_list_pool[i+1];
+    }
+
+    table->free_list = table->free_list_pool;
+  }
+
+  return table;
+}
+
+void *
+ffi_closure_alloc (size_t size, void **code)
+{
+  /* Create the closure */
+  ffi_closure *closure = malloc(size);
+  if (closure == NULL)
+    return NULL;
+
+  pthread_mutex_lock(&ffi_trampoline_lock);
+
+  /* Check for an active trampoline table with available entries. */
+  ffi_trampoline_table *table = ffi_trampoline_tables;
+  if (table == NULL || table->free_list == NULL) {
+    table = ffi_trampoline_table_alloc ();
+    if (table == NULL) {
+      free(closure);
+      return NULL;
+    }
+
+    /* Insert the new table at the top of the list */
+    table->next = ffi_trampoline_tables;
+    if (table->next != NULL)
+        table->next->prev = table;
+
+    ffi_trampoline_tables = table;
+  }
+
+  /* Claim the free entry */
+  ffi_trampoline_table_entry *entry = ffi_trampoline_tables->free_list;
+  ffi_trampoline_tables->free_list = entry->next;
+  ffi_trampoline_tables->free_count--;
+  entry->next = NULL;
+
+  pthread_mutex_unlock(&ffi_trampoline_lock);
+
+  /* Initialize the return values */
+  *code = entry->trampoline;
+  closure->trampoline_table = table;
+  closure->trampoline_table_entry = entry;
+
+  return closure;
+}
+
+void
+ffi_closure_free (void *ptr)
+{
+  ffi_closure *closure = ptr;
+
+  pthread_mutex_lock(&ffi_trampoline_lock);
+
+  /* Fetch the table and entry references */
+  ffi_trampoline_table *table = closure->trampoline_table;
+  ffi_trampoline_table_entry *entry = closure->trampoline_table_entry;
+
+  /* Return the entry to the free list */
+  entry->next = table->free_list;
+  table->free_list = entry;
+  table->free_count++;
+
+  /* If all trampolines within this table are free, and at least one other table exists, deallocate
+   * the table */
+  if (table->free_count == FFI_TRAMPOLINE_COUNT && ffi_trampoline_tables != table) {
+    /* Remove from the list */
+    if (table->prev != NULL)
+      table->prev->next = table->next;
+
+    if (table->next != NULL)
+      table->next->prev = table->prev;
+
+    /* Deallocate pages */
+    kern_return_t kt;
+    kt = vm_deallocate (mach_task_self (), table->config_page, PAGE_SIZE);
+    if (kt != KERN_SUCCESS)
+      fprintf(stderr, "vm_deallocate() failure: %d at %s:%d\n", kt, __FILE__, __LINE__);
+
+    kt = vm_deallocate (mach_task_self (), table->trampoline_page, PAGE_SIZE);
+    if (kt != KERN_SUCCESS)
+      fprintf(stderr, "vm_deallocate() failure: %d at %s:%d\n", kt, __FILE__, __LINE__);
+
+    /* Deallocate free list */
+    free (table->free_list_pool);
+    free (table);
+  } else if (ffi_trampoline_tables != table) {
+    /* Otherwise, bump this table to the top of the list */
+    table->prev = NULL;
+    table->next = ffi_trampoline_tables;
+    if (ffi_trampoline_tables != NULL)
+      ffi_trampoline_tables->prev = table;
+
+    ffi_trampoline_tables = table;
+  }
+
+  pthread_mutex_unlock (&ffi_trampoline_lock);
+
+  /* Free the closure */
+  free (closure);
+}
+
+#else
+
 #define FFI_INIT_TRAMPOLINE(TRAMP,FUN,CTX)				\
 ({ unsigned char *__tramp = (unsigned char*)(TRAMP);			\
    unsigned int  __fun = (unsigned int)(FUN);				\
    unsigned int  __ctx = (unsigned int)(CTX);				\
-   *(unsigned int*) &__tramp[0] = 0xe92d000f; /* stmfd sp!, {r0-r3} */	\
-   *(unsigned int*) &__tramp[4] = 0xe59f0000; /* ldr r0, [pc] */	\
-   *(unsigned int*) &__tramp[8] = 0xe59ff000; /* ldr pc, [pc] */	\
+   unsigned char *insns = (unsigned char *)(CTX);                       \
+   memcpy (__tramp, ffi_arm_trampoline, sizeof ffi_arm_trampoline);     \
    *(unsigned int*) &__tramp[12] = __ctx;				\
    *(unsigned int*) &__tramp[16] = __fun;				\
-   __clear_cache((&__tramp[0]), (&__tramp[19]));			\
+   __clear_cache((&__tramp[0]), (&__tramp[19])); /* Clear data mapping.  */ \
+   __clear_cache(insns, insns + 3 * sizeof (unsigned int));             \
+                                                 /* Clear instruction   \
+                                                    mapping.  */        \
  })
 
+#endif
 
 /* the cif must already be prep'ed */
 
@@ -295,15 +607,150 @@
 		      void *user_data,
 		      void *codeloc)
 {
-  FFI_ASSERT (cif->abi == FFI_SYSV);
+  void (*closure_func)(ffi_closure*) = NULL;
 
-  FFI_INIT_TRAMPOLINE (&closure->tramp[0], \
-		       &ffi_closure_SYSV,  \
-		       codeloc);
+  if (cif->abi == FFI_SYSV)
+    closure_func = &ffi_closure_SYSV;
+#ifdef __ARM_EABI__
+  else if (cif->abi == FFI_VFP)
+    closure_func = &ffi_closure_VFP;
+#endif
+  else
+    return FFI_BAD_ABI;
     
+#if FFI_EXEC_TRAMPOLINE_TABLE
+  void **config = FFI_TRAMPOLINE_CODELOC_CONFIG(codeloc);
+  config[0] = closure;
+  config[1] = closure_func;
+#else
+  FFI_INIT_TRAMPOLINE (&closure->tramp[0], \
+		       closure_func,  \
+		       codeloc);
+#endif
+
   closure->cif  = cif;
   closure->user_data = user_data;
   closure->fun  = fun;
 
   return FFI_OK;
 }
+
+/* Below are routines for VFP hard-float support. */
+
+static int rec_vfp_type_p (ffi_type *t, int *elt, int *elnum)
+{
+  switch (t->type)
+    {
+    case FFI_TYPE_FLOAT:
+    case FFI_TYPE_DOUBLE:
+      *elt = (int) t->type;
+      *elnum = 1;
+      return 1;
+
+    case FFI_TYPE_STRUCT_VFP_FLOAT:
+      *elt = FFI_TYPE_FLOAT;
+      *elnum = t->size / sizeof (float);
+      return 1;
+
+    case FFI_TYPE_STRUCT_VFP_DOUBLE:
+      *elt = FFI_TYPE_DOUBLE;
+      *elnum = t->size / sizeof (double);
+      return 1;
+
+    case FFI_TYPE_STRUCT:;
+      {
+	int base_elt = 0, total_elnum = 0;
+	ffi_type **el = t->elements;
+	while (*el)
+	  {
+	    int el_elt = 0, el_elnum = 0;
+	    if (! rec_vfp_type_p (*el, &el_elt, &el_elnum)
+		|| (base_elt && base_elt != el_elt)
+		|| total_elnum + el_elnum > 4)
+	      return 0;
+	    base_elt = el_elt;
+	    total_elnum += el_elnum;
+	    el++;
+	  }
+	*elnum = total_elnum;
+	*elt = base_elt;
+	return 1;
+      }
+    default: ;
+    }
+  return 0;
+}
+
+static int vfp_type_p (ffi_type *t)
+{
+  int elt, elnum;
+  if (rec_vfp_type_p (t, &elt, &elnum))
+    {
+      if (t->type == FFI_TYPE_STRUCT)
+	{
+	  if (elnum == 1)
+	    t->type = elt;
+	  else
+	    t->type = (elt == FFI_TYPE_FLOAT
+		       ? FFI_TYPE_STRUCT_VFP_FLOAT
+		       : FFI_TYPE_STRUCT_VFP_DOUBLE);
+	}
+      return (int) t->type;
+    }
+  return 0;
+}
+
+static void place_vfp_arg (ffi_cif *cif, ffi_type *t)
+{
+  int reg = cif->vfp_reg_free;
+  int nregs = t->size / sizeof (float);
+  int align = ((t->type == FFI_TYPE_STRUCT_VFP_FLOAT
+		|| t->type == FFI_TYPE_FLOAT) ? 1 : 2);
+  /* Align register number. */
+  if ((reg & 1) && align == 2)
+    reg++;
+  while (reg + nregs <= 16)
+    {
+      int s, new_used = 0;
+      for (s = reg; s < reg + nregs; s++)
+	{
+	  new_used |= (1 << s);
+	  if (cif->vfp_used & (1 << s))
+	    {
+	      reg += align;
+	      goto next_reg;
+	    }
+	}
+      /* Found regs to allocate. */
+      cif->vfp_used |= new_used;
+      cif->vfp_args[cif->vfp_nargs++] = reg;
+
+      /* Update vfp_reg_free. */
+      if (cif->vfp_used & (1 << cif->vfp_reg_free))
+	{
+	  reg += nregs;
+	  while (cif->vfp_used & (1 << reg))
+	    reg += 1;
+	  cif->vfp_reg_free = reg;
+	}
+      return;
+    next_reg: ;
+    }
+}
+
+static void layout_vfp_args (ffi_cif *cif)
+{
+  int i;
+  /* Init VFP fields */
+  cif->vfp_used = 0;
+  cif->vfp_nargs = 0;
+  cif->vfp_reg_free = 0;
+  memset (cif->vfp_args, -1, 16); /* Init to -1. */
+
+  for (i = 0; i < cif->nargs; i++)
+    {
+      ffi_type *t = cif->arg_types[i];
+      if (vfp_type_p (t))
+	place_vfp_arg (cif, t);
+    }
+}
diff --git a/Modules/_ctypes/libffi/src/arm/ffitarget.h b/Modules/_ctypes/libffi/src/arm/ffitarget.h
index a957426..26d494d 100644
--- a/Modules/_ctypes/libffi/src/arm/ffitarget.h
+++ b/Modules/_ctypes/libffi/src/arm/ffitarget.h
@@ -1,5 +1,8 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003  Red Hat, Inc.
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 2010  CodeSourcery
+                 Copyright (c) 1996-2003  Red Hat, Inc.
+
    Target configuration macros for ARM.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -27,6 +30,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 #ifndef LIBFFI_ASM
 typedef unsigned long          ffi_arg;
 typedef signed long            ffi_sarg;
@@ -34,11 +41,27 @@
 typedef enum ffi_abi {
   FFI_FIRST_ABI = 0,
   FFI_SYSV,
+  FFI_VFP,
+  FFI_LAST_ABI,
+#ifdef __ARM_PCS_VFP
+  FFI_DEFAULT_ABI = FFI_VFP,
+#else
   FFI_DEFAULT_ABI = FFI_SYSV,
-  FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
+#endif
 } ffi_abi;
 #endif
 
+#define FFI_EXTRA_CIF_FIELDS			\
+  int vfp_used;					\
+  short vfp_reg_free, vfp_nargs;		\
+  signed char vfp_args[16]			\
+
+/* Internally used. */
+#define FFI_TYPE_STRUCT_VFP_FLOAT  (FFI_TYPE_LAST + 1)
+#define FFI_TYPE_STRUCT_VFP_DOUBLE (FFI_TYPE_LAST + 2)
+
+#define FFI_TARGET_SPECIFIC_VARIADIC
+
 /* ---- Definitions for closures ----------------------------------------- */
 
 #define FFI_CLOSURES 1
@@ -46,4 +69,3 @@
 #define FFI_NATIVE_RAW_API 0
 
 #endif
-
diff --git a/Modules/_ctypes/libffi/src/arm/gentramp.sh b/Modules/_ctypes/libffi/src/arm/gentramp.sh
new file mode 100755
index 0000000..74f0b86
--- /dev/null
+++ b/Modules/_ctypes/libffi/src/arm/gentramp.sh
@@ -0,0 +1,118 @@
+#!/bin/sh
+
+# -----------------------------------------------------------------------
+#  gentramp.sh - Copyright (c) 2010, Plausible Labs Cooperative, Inc.
+#  
+#  ARM Trampoline Page Generator
+#
+#  Permission is hereby granted, free of charge, to any person obtaining
+#  a copy of this software and associated documentation files (the
+#  ``Software''), to deal in the Software without restriction, including
+#  without limitation the rights to use, copy, modify, merge, publish,
+#  distribute, sublicense, and/or sell copies of the Software, and to
+#  permit persons to whom the Software is furnished to do so, subject to
+#  the following conditions:
+#
+#  The above copyright notice and this permission notice shall be included
+#  in all copies or substantial portions of the Software.
+#
+#  THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
+#  EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+#  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+#  NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+#  HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+#  WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+#  OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+#  DEALINGS IN THE SOFTWARE.
+#  -----------------------------------------------------------------------
+
+PROGNAME=$0
+
+# Each trampoline is exactly 3 instructions, or 12 bytes. If any of these values change,
+# the entire arm trampoline implementation must be updated to match, too.
+
+# Size of an individual trampoline, in bytes
+TRAMPOLINE_SIZE=12
+
+# Page size, in bytes
+PAGE_SIZE=4096
+
+# Compute the size of the reachable config page; The first 16 bytes of the config page
+# are unreachable due to our maximum pc-relative ldr offset.
+PAGE_AVAIL=`expr $PAGE_SIZE - 16`
+
+# Compute the number of of available trampolines. 
+TRAMPOLINE_COUNT=`expr $PAGE_AVAIL / $TRAMPOLINE_SIZE`
+
+header () {
+    echo "# GENERATED CODE - DO NOT EDIT"
+    echo "# This file was generated by $PROGNAME"
+    echo ""
+
+    # Write out the license header
+cat << EOF
+#  Copyright (c) 2010, Plausible Labs Cooperative, Inc.
+#  
+#  Permission is hereby granted, free of charge, to any person obtaining
+#  a copy of this software and associated documentation files (the
+#  ``Software''), to deal in the Software without restriction, including
+#  without limitation the rights to use, copy, modify, merge, publish,
+#  distribute, sublicense, and/or sell copies of the Software, and to
+#  permit persons to whom the Software is furnished to do so, subject to
+#  the following conditions:
+#
+#  The above copyright notice and this permission notice shall be included
+#  in all copies or substantial portions of the Software.
+#
+#  THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
+#  EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+#  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+#  NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+#  HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+#  WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+#  OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+#  DEALINGS IN THE SOFTWARE.
+#  -----------------------------------------------------------------------
+
+EOF
+
+    # Write out the trampoline table, aligned to the page boundary
+    echo ".text"
+    echo ".align 12"
+    echo ".globl _ffi_closure_trampoline_table_page"
+    echo "_ffi_closure_trampoline_table_page:"
+}
+
+
+# WARNING - Don't modify the trampoline code size without also updating the relevent libffi code
+trampoline () {
+    cat << END
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+END
+}
+
+main () {
+    # Write out the header
+    header
+
+    # Write out the trampolines
+    local i=0
+    while [ $i -lt ${TRAMPOLINE_COUNT} ]; do
+        trampoline
+        local i=`expr $i + 1`
+    done
+}
+
+main
diff --git a/Modules/_ctypes/libffi/src/arm/sysv.S b/Modules/_ctypes/libffi/src/arm/sysv.S
index 9064318..fb38cd6 100644
--- a/Modules/_ctypes/libffi/src/arm/sysv.S
+++ b/Modules/_ctypes/libffi/src/arm/sysv.S
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------------
-   sysv.S - Copyright (c) 1998, 2008 Red Hat, Inc.
+   sysv.S - Copyright (c) 1998, 2008, 2011 Red Hat, Inc.
+	    Copyright (c) 2011 Plausible Labs Cooperative, Inc.
    
    ARM Foreign Function Interface 
 
@@ -39,7 +40,11 @@
 #else
 #define CNAME(x) x
 #endif
+#ifdef __APPLE__
+#define ENTRY(x) .globl _##x; _##x:
+#else
 #define ENTRY(x) .globl CNAME(x); .type CNAME(x),%function; CNAME(x):
+#endif /* __APPLE__ */
 #endif
 
 #ifdef __ELF__
@@ -48,6 +53,12 @@
 #define LSYM(x) x
 #endif
 
+/* Use the SOFTFP return value ABI on Mac OS X, as per the iOS ABI
+  Function Call Guide */
+#ifdef __APPLE__
+#define __SOFTFP__
+#endif
+
 /* We need a better way of testing for this, but for now, this is all 
    we can do.  */
 @ This selects the minimum architecture level required.
@@ -105,21 +116,33 @@
 	.align 0
 	.thumb
 	.thumb_func
+#ifdef __APPLE__
+	ENTRY($0)
+#else
 	ENTRY(\name)
+#endif
 	bx	pc
 	nop
 	.arm
 	UNWIND .fnstart
 /* A hook to tell gdb that we've switched to ARM mode.  Also used to call
    directly from other local arm routines.  */
-_L__\name:		
+#ifdef __APPLE__
+_L__$0:
+#else
+_L__\name:
+#endif
 .endm
 #else
 .macro	ARM_FUNC_START name
 	.text
 	.align 0
 	.arm
+#ifdef __APPLE__
+	ENTRY($0)
+#else
 	ENTRY(\name)
+#endif
 	UNWIND .fnstart
 .endm
 #endif
@@ -141,13 +164,11 @@
 #endif
 .endm
 
-
 	@ r0:   ffi_prep_args
 	@ r1:   &ecif
 	@ r2:   cif->bytes
 	@ r3:   fig->flags
 	@ sp+0: ecif.rvalue
-	@ sp+4: fn
 
 	@ This assumes we are using gas.
 ARM_FUNC_START ffi_call_SYSV
@@ -162,24 +183,23 @@
 	sub	sp, fp, r2
 
 	@ Place all of the ffi_prep_args in position
-	mov	ip, r0
 	mov	r0, sp
 	@     r1 already set
 
 	@ Call ffi_prep_args(stack, &ecif)
-	call_reg(ip)
+	bl	CNAME(ffi_prep_args)
 
 	@ move first 4 parameters in registers
 	ldmia	sp, {r0-r3}
 
 	@ and adjust stack
-	ldr	ip, [fp, #8]
-        cmp	ip, #16
-	movhs	ip, #16
-        add	sp, sp, ip
+	sub	lr, fp, sp	@ cif->bytes == fp - sp
+	ldr	ip, [fp]	@ load fn() in advance
+	cmp	lr, #16
+	movhs	lr, #16
+	add	sp, sp, lr
 
 	@ call (fn) (...)
-	ldr	ip, [fp, #28]
 	call_reg(ip)
 	
 	@ Remove the space we pushed for the args
@@ -224,11 +244,19 @@
 #endif
 
 LSYM(Lepilogue):
-	RETLDM	"r0-r3,fp"
+#if defined (__INTERWORKING__)
+	ldmia   sp!, {r0-r3,fp, lr}
+	bx	lr
+#else
+	ldmia   sp!, {r0-r3,fp, pc}
+#endif
 
 .ffi_call_SYSV_end:
 	UNWIND .fnend
+#ifdef __ELF__
         .size    CNAME(ffi_call_SYSV),.ffi_call_SYSV_end-CNAME(ffi_call_SYSV)
+#endif
+
 
 /*
 	unsigned int FFI_HIDDEN
@@ -244,11 +272,11 @@
 	stmfd	sp!, {ip, lr}
 	UNWIND .save	{r0, lr}
 	add	r2, sp, #8
-	.pad #16
+	UNWIND .pad #16
 	sub	sp, sp, #16
 	str	sp, [sp, #8]
 	add	r1, sp, #8
-	bl	ffi_closure_SYSV_inner
+	bl	CNAME(ffi_closure_SYSV_inner)
 	cmp	r0, #FFI_TYPE_INT
 	beq	.Lretint
 
@@ -300,7 +328,177 @@
 
 .ffi_closure_SYSV_end:
 	UNWIND .fnend
+#ifdef __ELF__
         .size    CNAME(ffi_closure_SYSV),.ffi_closure_SYSV_end-CNAME(ffi_closure_SYSV)
+#endif
+
+
+/* Below are VFP hard-float ABI call and closure implementations.
+   Add VFP FPU directive here. This is only compiled into the library
+   under EABI.  */
+#ifdef __ARM_EABI__
+	.fpu	vfp
+
+	@ r0:   fn
+	@ r1:   &ecif
+	@ r2:   cif->bytes
+	@ r3:   fig->flags
+	@ sp+0: ecif.rvalue
+
+ARM_FUNC_START ffi_call_VFP
+	@ Save registers
+        stmfd	sp!, {r0-r3, fp, lr}
+	UNWIND .save	{r0-r3, fp, lr}
+	mov	fp, sp
+	UNWIND .setfp	fp, sp
+
+	@ Make room for all of the new args.
+	sub	sp, sp, r2
+
+	@ Make room for loading VFP args
+	sub	sp, sp, #64
+
+	@ Place all of the ffi_prep_args in position
+	mov	r0, sp
+	@     r1 already set
+	sub	r2, fp, #64   @ VFP scratch space
+
+	@ Call ffi_prep_args(stack, &ecif, vfp_space)
+	bl	CNAME(ffi_prep_args)
+
+	@ Load VFP register args if needed
+	cmp	r0, #0
+	beq	LSYM(Lbase_args)
+
+	@ Load only d0 if possible
+	cmp	r0, #3
+	sub	ip, fp, #64
+	flddle	d0, [ip]
+	fldmiadgt	ip, {d0-d7}
+
+LSYM(Lbase_args):
+	@ move first 4 parameters in registers
+	ldmia	sp, {r0-r3}
+
+	@ and adjust stack
+	sub	lr, ip, sp	@ cif->bytes == (fp - 64) - sp
+	ldr	ip, [fp]	@ load fn() in advance
+        cmp	lr, #16
+	movhs	lr, #16
+        add	sp, sp, lr
+
+	@ call (fn) (...)
+	call_reg(ip)
+
+	@ Remove the space we pushed for the args
+	mov	sp, fp
+
+	@ Load r2 with the pointer to storage for
+	@ the return value
+	ldr	r2, [sp, #24]
+
+	@ Load r3 with the return type code 
+	ldr	r3, [sp, #12]
+
+	@ If the return value pointer is NULL,
+	@ assume no return value.
+	cmp	r2, #0
+	beq	LSYM(Lepilogue_vfp)
+
+	cmp	r3, #FFI_TYPE_INT
+	streq	r0, [r2]
+	beq	LSYM(Lepilogue_vfp)
+
+	cmp	r3, #FFI_TYPE_SINT64
+	stmeqia	r2, {r0, r1}
+	beq	LSYM(Lepilogue_vfp)
+
+	cmp	r3, #FFI_TYPE_FLOAT
+	fstseq	s0, [r2]
+	beq	LSYM(Lepilogue_vfp)
+	
+	cmp	r3, #FFI_TYPE_DOUBLE
+	fstdeq	d0, [r2]
+	beq	LSYM(Lepilogue_vfp)
+
+	cmp	r3, #FFI_TYPE_STRUCT_VFP_FLOAT
+	cmpne	r3, #FFI_TYPE_STRUCT_VFP_DOUBLE
+	fstmiadeq	r2, {d0-d3}
+
+LSYM(Lepilogue_vfp):
+	RETLDM	"r0-r3,fp"
+
+.ffi_call_VFP_end:
+	UNWIND .fnend
+        .size    CNAME(ffi_call_VFP),.ffi_call_VFP_end-CNAME(ffi_call_VFP)
+
+
+ARM_FUNC_START ffi_closure_VFP
+	fstmfdd	sp!, {d0-d7}
+	@ r0-r3, then d0-d7
+	UNWIND .pad #80
+	add	ip, sp, #80
+	stmfd	sp!, {ip, lr}
+	UNWIND .save	{r0, lr}
+	add	r2, sp, #72
+	add	r3, sp, #8
+	UNWIND .pad #72
+	sub	sp, sp, #72
+	str	sp, [sp, #64]
+	add	r1, sp, #64
+	bl	CNAME(ffi_closure_SYSV_inner)
+
+	cmp	r0, #FFI_TYPE_INT
+	beq	.Lretint_vfp
+
+	cmp	r0, #FFI_TYPE_FLOAT
+	beq	.Lretfloat_vfp
+
+	cmp	r0, #FFI_TYPE_DOUBLE
+	cmpne	r0, #FFI_TYPE_LONGDOUBLE
+	beq	.Lretdouble_vfp
+
+	cmp	r0, #FFI_TYPE_SINT64
+	beq	.Lretlonglong_vfp
+
+	cmp	r0, #FFI_TYPE_STRUCT_VFP_FLOAT
+	beq	.Lretfloat_struct_vfp
+
+	cmp	r0, #FFI_TYPE_STRUCT_VFP_DOUBLE
+	beq	.Lretdouble_struct_vfp
+	
+.Lclosure_epilogue_vfp:
+	add	sp, sp, #72
+	ldmfd	sp, {sp, pc}
+
+.Lretfloat_vfp:
+	flds	s0, [sp]
+	b	.Lclosure_epilogue_vfp
+.Lretdouble_vfp:
+	fldd	d0, [sp]
+	b	.Lclosure_epilogue_vfp
+.Lretint_vfp:
+	ldr	r0, [sp]
+	b	.Lclosure_epilogue_vfp
+.Lretlonglong_vfp:
+	ldmia	sp, {r0, r1}
+	b	.Lclosure_epilogue_vfp
+.Lretfloat_struct_vfp:
+	fldmiad	sp, {d0-d1}
+	b	.Lclosure_epilogue_vfp
+.Lretdouble_struct_vfp:
+	fldmiad	sp, {d0-d3}
+	b	.Lclosure_epilogue_vfp
+
+.ffi_closure_VFP_end:
+	UNWIND .fnend
+        .size    CNAME(ffi_closure_VFP),.ffi_closure_VFP_end-CNAME(ffi_closure_VFP)
+#endif
+
+ENTRY(ffi_arm_trampoline)
+	stmfd sp!, {r0-r3}
+	ldr r0, [pc]
+	ldr pc, [pc]
 
 #if defined __ELF__ && defined __linux__
 	.section	.note.GNU-stack,"",%progbits
diff --git a/Modules/_ctypes/libffi/src/arm/trampoline.S b/Modules/_ctypes/libffi/src/arm/trampoline.S
new file mode 100644
index 0000000..935e8de
--- /dev/null
+++ b/Modules/_ctypes/libffi/src/arm/trampoline.S
@@ -0,0 +1,4450 @@
+# GENERATED CODE - DO NOT EDIT
+# This file was generated by src/arm/gentramp.sh
+
+#  Copyright (c) 2010, Plausible Labs Cooperative, Inc.
+#  
+#  Permission is hereby granted, free of charge, to any person obtaining
+#  a copy of this software and associated documentation files (the
+#  Software''), to deal in the Software without restriction, including
+#  without limitation the rights to use, copy, modify, merge, publish,
+#  distribute, sublicense, and/or sell copies of the Software, and to
+#  permit persons to whom the Software is furnished to do so, subject to
+#  the following conditions:
+#
+#  The above copyright notice and this permission notice shall be included
+#  in all copies or substantial portions of the Software.
+#
+#  THE SOFTWARE IS PROVIDED AS IS'', WITHOUT WARRANTY OF ANY KIND,
+#  EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+#  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+#  NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+#  HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+#  WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+#  OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+#  DEALINGS IN THE SOFTWARE.
+#  -----------------------------------------------------------------------
+
+.text
+.align 12
+.globl _ffi_closure_trampoline_table_page
+_ffi_closure_trampoline_table_page:
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
diff --git a/Modules/_ctypes/libffi/src/avr32/ffi.c b/Modules/_ctypes/libffi/src/avr32/ffi.c
index 39fba2b..3d43397 100644
--- a/Modules/_ctypes/libffi/src/avr32/ffi.c
+++ b/Modules/_ctypes/libffi/src/avr32/ffi.c
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------------
-   ffi.c - Copyright (c) 2009  Bradley Smith <brad@brad-smith.co.uk>
+   ffi.c - Copyright (c) 2011  Anthony Green
+           Copyright (c) 2009  Bradley Smith <brad@brad-smith.co.uk>
 
    AVR32 Foreign Function Interface
 
@@ -394,7 +395,8 @@
     void (*fun)(ffi_cif*, void*, void**, void*), void *user_data,
     void *codeloc)
 {
-    FFI_ASSERT(cif->abi == FFI_SYSV);
+    if (cif->abi != FFI_SYSV)
+      return FFI_BAD_ABI;
 
     unsigned char *__tramp = (unsigned char*)(&closure->tramp[0]);
     unsigned int  __fun = (unsigned int)(&ffi_closure_SYSV);
diff --git a/Modules/_ctypes/libffi/src/avr32/ffitarget.h b/Modules/_ctypes/libffi/src/avr32/ffitarget.h
index 1c799b1..d0c7586 100644
--- a/Modules/_ctypes/libffi/src/avr32/ffitarget.h
+++ b/Modules/_ctypes/libffi/src/avr32/ffitarget.h
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 2009  Bradley Smith <brad@brad-smith.co.uk>
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 2009  Bradley Smith <brad@brad-smith.co.uk>
    Target configuration macros for AVR32.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -27,6 +28,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 #ifndef LIBFFI_ASM
 typedef unsigned long          ffi_arg;
 typedef signed long            ffi_sarg;
@@ -34,8 +39,8 @@
 typedef enum ffi_abi {
   FFI_FIRST_ABI = 0,
   FFI_SYSV,
-  FFI_DEFAULT_ABI = FFI_SYSV,
-  FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
+  FFI_LAST_ABI,
+  FFI_DEFAULT_ABI = FFI_SYSV
 } ffi_abi;
 #endif
 
diff --git a/Modules/_ctypes/libffi/src/bfin/ffi.c b/Modules/_ctypes/libffi/src/bfin/ffi.c
new file mode 100644
index 0000000..0beccc1
--- /dev/null
+++ b/Modules/_ctypes/libffi/src/bfin/ffi.c
@@ -0,0 +1,195 @@
+/* -----------------------------------------------------------------------
+   ffi.c - Copyright (c) 2012  Alexandre K. I. de Mendonca <alexandre.keunecke@gmail.com>
+
+   Blackfin Foreign Function Interface
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   ``Software''), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+   NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+   HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+   WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+   OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+   DEALINGS IN THE SOFTWARE.
+   ----------------------------------------------------------------------- */
+#include <ffi.h>
+#include <ffi_common.h>
+
+#include <stdlib.h>
+#include <stdio.h>
+
+/* Maximum number of GPRs available for argument passing.  */
+#define MAX_GPRARGS 3
+
+/*
+ * Return types
+ */
+#define FFIBFIN_RET_VOID 0
+#define FFIBFIN_RET_BYTE 1
+#define FFIBFIN_RET_HALFWORD 2
+#define FFIBFIN_RET_INT64 3
+#define FFIBFIN_RET_INT32 4
+
+/*====================================================================*/
+/*                          PROTOTYPE          *
+ /*====================================================================*/
+void ffi_prep_args(unsigned char *, extended_cif *);
+
+/*====================================================================*/
+/*                          Externals                                 */
+/*                          (Assembly)                                */
+/*====================================================================*/
+
+extern void ffi_call_SYSV(unsigned, extended_cif *, void(*)(unsigned char *, extended_cif *), unsigned, void *, void(*fn)(void));
+
+/*====================================================================*/
+/*                          Implementation                            */
+/*                                                            */
+/*====================================================================*/
+
+
+/*
+ * This function calculates the return type (size) based on type.
+ */
+
+ffi_status ffi_prep_cif_machdep(ffi_cif *cif)
+{
+   /* --------------------------------------*
+    *   Return handling                *
+    * --------------------------------------*/
+   switch (cif->rtype->type) {
+      case FFI_TYPE_VOID:
+         cif->flags = FFIBFIN_RET_VOID;
+         break;
+      case FFI_TYPE_UINT16:
+      case FFI_TYPE_SINT16:
+         cif->flags = FFIBFIN_RET_HALFWORD;
+         break;
+      case FFI_TYPE_UINT8:
+         cif->flags = FFIBFIN_RET_BYTE;
+         break;
+      case FFI_TYPE_INT:
+      case FFI_TYPE_UINT32:
+      case FFI_TYPE_SINT32:
+      case FFI_TYPE_FLOAT:
+      case FFI_TYPE_POINTER:
+      case FFI_TYPE_SINT8:
+         cif->flags = FFIBFIN_RET_INT32;
+         break;
+      case FFI_TYPE_SINT64:
+      case FFI_TYPE_UINT64:
+      case FFI_TYPE_DOUBLE:
+          cif->flags = FFIBFIN_RET_INT64;
+          break;
+      case FFI_TYPE_STRUCT:
+         if (cif->rtype->size <= 4){
+        	 cif->flags = FFIBFIN_RET_INT32;
+         }else if (cif->rtype->size == 8){
+        	 cif->flags = FFIBFIN_RET_INT64;
+         }else{
+        	 //it will return via a hidden pointer in P0
+        	 cif->flags = FFIBFIN_RET_VOID;
+         }
+         break;
+      default:
+         FFI_ASSERT(0);
+         break;
+   }
+   return FFI_OK;
+}
+
+/*
+ * This will prepare the arguments and will call the assembly routine
+ * cif = the call interface
+ * fn = the function to be called
+ * rvalue = the return value
+ * avalue = the arguments
+ */
+void ffi_call(ffi_cif *cif, void(*fn)(void), void *rvalue, void **avalue)
+{
+   int ret_type = cif->flags;
+   extended_cif ecif;
+   ecif.cif = cif;
+   ecif.avalue = avalue;
+   ecif.rvalue = rvalue;
+
+   switch (cif->abi) {
+      case FFI_SYSV:
+         ffi_call_SYSV(cif->bytes, &ecif, ffi_prep_args, ret_type, ecif.rvalue, fn);
+         break;
+      default:
+         FFI_ASSERT(0);
+         break;
+   }
+}
+
+
+/*
+* This function prepares the parameters (copies them from the ecif to the stack)
+*  to call the function (ffi_prep_args is called by the assembly routine in file
+*  sysv.S, which also calls the actual function)
+*/
+void ffi_prep_args(unsigned char *stack, extended_cif *ecif)
+{
+   register unsigned int i = 0;
+   void **p_argv;
+   unsigned char *argp;
+   ffi_type **p_arg;
+   argp = stack;
+   p_argv = ecif->avalue;
+   for (i = ecif->cif->nargs, p_arg = ecif->cif->arg_types;
+        (i != 0);
+        i--, p_arg++) {
+      size_t z;
+      z = (*p_arg)->size;
+      if (z < sizeof(int)) {
+         z = sizeof(int);
+         switch ((*p_arg)->type) {
+            case FFI_TYPE_SINT8: {
+                  signed char v = *(SINT8 *)(* p_argv);
+                  signed int t = v;
+                  *(signed int *) argp = t;
+               }
+               break;
+            case FFI_TYPE_UINT8: {
+                  unsigned char v = *(UINT8 *)(* p_argv);
+                  unsigned int t = v;
+                  *(unsigned int *) argp = t;
+               }
+               break;
+            case FFI_TYPE_SINT16:
+               *(signed int *) argp = (signed int) * (SINT16 *)(* p_argv);
+               break;
+            case FFI_TYPE_UINT16:
+               *(unsigned int *) argp = (unsigned int) * (UINT16 *)(* p_argv);
+               break;
+            case FFI_TYPE_STRUCT:
+               memcpy(argp, *p_argv, (*p_arg)->size);
+               break;
+            default:
+               FFI_ASSERT(0);
+               break;
+         }
+      } else if (z == sizeof(int)) {
+         *(unsigned int *) argp = (unsigned int) * (UINT32 *)(* p_argv);
+      } else {
+         memcpy(argp, *p_argv, z);
+      }
+      p_argv++;
+      argp += z;
+   }
+}
+
+
+
diff --git a/Modules/_ctypes/libffi/src/bfin/ffitarget.h b/Modules/_ctypes/libffi/src/bfin/ffitarget.h
new file mode 100644
index 0000000..2175c01
--- /dev/null
+++ b/Modules/_ctypes/libffi/src/bfin/ffitarget.h
@@ -0,0 +1,43 @@
+/* -----------------------------------------------------------------------
+   ffitarget.h - Copyright (c) 2012  Alexandre K. I. de Mendonca <alexandre.keunecke@gmail.com>
+
+   Blackfin Foreign Function Interface
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   ``Software''), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+   NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+   HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+   WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+   OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+   DEALINGS IN THE SOFTWARE.
+   ----------------------------------------------------------------------- */
+
+#ifndef LIBFFI_TARGET_H
+#define LIBFFI_TARGET_H
+
+#ifndef LIBFFI_ASM
+typedef unsigned long          ffi_arg;
+typedef signed 	 long          ffi_sarg;
+
+typedef enum ffi_abi {
+  FFI_FIRST_ABI = 0,
+  FFI_SYSV,
+  FFI_LAST_ABI,
+  FFI_DEFAULT_ABI = FFI_SYSV
+} ffi_abi;
+#endif
+
+#endif
+
diff --git a/Modules/_ctypes/libffi/src/bfin/sysv.S b/Modules/_ctypes/libffi/src/bfin/sysv.S
new file mode 100644
index 0000000..ae7a152
--- /dev/null
+++ b/Modules/_ctypes/libffi/src/bfin/sysv.S
@@ -0,0 +1,177 @@
+/* -----------------------------------------------------------------------
+   sysv.S - Copyright (c) 2012  Alexandre K. I. de Mendonca <alexandre.keunecke@gmail.com>
+
+   Blackfin Foreign Function Interface
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   ``Software''), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+   NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+   HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+   WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+   OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+   DEALINGS IN THE SOFTWARE.
+   ----------------------------------------------------------------------- */
+
+#define LIBFFI_ASM
+#include <fficonfig.h>
+#include <ffi.h>
+
+.text
+.align 4
+
+	/*
+	 There is a "feature" in the bfin toolchain that it puts a _ before funcion names
+	 that's why the function here it's called _ffi_call_SYSV and not ffi_call_SYSV
+	 */
+	.global _ffi_call_SYSV;
+	.type _ffi_call_SYSV, STT_FUNC;
+	.func ffi_call_SYSV
+
+	/*
+	cif->bytes  	= R0	(fp+8)
+	&ecif			= R1	(fp+12)
+	ffi_prep_args	= R2	(fp+16)
+	ret_type		= stack (fp+20)
+	ecif.rvalue		= stack (fp+24)
+	fn				= stack	(fp+28)
+					  got	(fp+32)
+    There is room for improvement here (we can use temporary registers
+        instead of saving the values in the memory)
+	REGS:
+		P5 => Stack pointer (function arguments)
+		R5 => cif->bytes
+		R4 => ret->type
+
+		FP-20 = P3
+		FP-16 = SP (parameters area)
+		FP-12 = SP (temp)
+		FP-08 = function return part 1 [R0]
+		FP-04 = function return part 2 [R1]
+	*/
+
+_ffi_call_SYSV:
+.prologue:
+	LINK 20;
+	[FP-20] = P3;
+	[FP+8] = R0;
+	[FP+12] = R1;
+	[FP+16] = R2;
+
+.allocate_stack:
+	//alocate cif->bytes into the stack
+	R1 = [FP+8];
+	R0 = SP;
+	R0 = R0 - R1;
+	R1 = 4;
+	R0 = R0 - R1;
+	[FP-12] = SP;
+	SP = R0;
+	[FP-16] = SP;
+
+.call_prep_args:
+	//get the addr of prep_args
+	P0 = [P3 + _ffi_prep_args@FUNCDESC_GOT17M4];
+	P1 = [P0];
+	P3 = [P0+4];
+	R0 = [FP-16];//SP (parameter area)
+	R1 = [FP+12];//ecif
+	call (P1);
+
+.call_user_function:
+	//ajust SP so as to allow the user function access the parameters on the stack
+	SP = [FP-16]; //point to function parameters
+	R0 = [SP];
+	R1 = [SP+4];
+	R2 = [SP+8];
+	//load user function address
+	P0 = FP;
+	P0 +=28;
+	P1 = [P0];
+	P1 = [P1];
+	P3 = [P0+4];
+	/*
+		For functions returning aggregate values (struct) occupying more than 8 bytes,
+		the caller allocates the return value object on the stack and the address
+		of this object is passed to the callee as a hidden argument in register P0.
+	*/
+	P0 = [FP+24];
+
+	call (P1);
+	SP = [FP-12];
+.compute_return:
+	P2 = [FP-20];
+	[FP-8] = R0;
+	[FP-4] = R1;
+
+	R0 = [FP+20];
+	R1 = R0 << 2;
+
+	R0 = [P2+.rettable@GOT17M4];
+	R0 = R1 + R0;
+	P2 = R0;
+	R1 = [P2];
+
+	P2 = [FP+-20];
+	R0 = [P2+.rettable@GOT17M4];
+	R0 = R1 + R0;
+	P2 = R0;
+	R0 = [FP-8];
+	R1 = [FP-4];
+	jump (P2);
+
+/*
+#define FFIBFIN_RET_VOID 0
+#define FFIBFIN_RET_BYTE 1
+#define FFIBFIN_RET_HALFWORD 2
+#define FFIBFIN_RET_INT64 3
+#define FFIBFIN_RET_INT32 4
+*/
+.align 4
+.align 4
+.rettable:
+	.dd .epilogue - .rettable
+	.dd	.rbyte - .rettable;
+	.dd	.rhalfword - .rettable;
+	.dd	.rint64 - .rettable;
+	.dd	.rint32 - .rettable;
+
+.rbyte:
+	P0 = [FP+24];
+	R0 = R0.B (Z);
+	[P0] = R0;
+	JUMP .epilogue
+.rhalfword:
+	P0 = [FP+24];
+	R0 = R0.L;
+	[P0] = R0;
+	JUMP .epilogue
+.rint64:
+	P0 = [FP+24];// &rvalue
+	[P0] = R0;
+	[P0+4] = R1;
+	JUMP .epilogue
+.rint32:
+	P0 = [FP+24];
+	[P0] = R0;
+.epilogue:
+	R0 = [FP+8];
+	R1 = [FP+12];
+	R2 = [FP+16];
+	P3 = [FP-20];
+	UNLINK;
+	RTS;
+
+.size _ffi_call_SYSV,.-_ffi_call_SYSV;
+.endfunc
diff --git a/Modules/_ctypes/libffi/src/closures.c b/Modules/_ctypes/libffi/src/closures.c
index 0b156e0..6298d6f 100644
--- a/Modules/_ctypes/libffi/src/closures.c
+++ b/Modules/_ctypes/libffi/src/closures.c
@@ -1,6 +1,7 @@
 /* -----------------------------------------------------------------------
-   closures.c - Copyright (c) 2007  Red Hat, Inc.
-   Copyright (C) 2007, 2009 Free Software Foundation, Inc
+   closures.c - Copyright (c) 2007, 2009, 2010  Red Hat, Inc.
+                Copyright (C) 2007, 2009, 2010 Free Software Foundation, Inc
+                Copyright (c) 2011 Plausible Labs Cooperative, Inc.
 
    Code to allocate and deallocate memory for closures.
 
@@ -32,7 +33,7 @@
 #include <ffi.h>
 #include <ffi_common.h>
 
-#ifndef FFI_MMAP_EXEC_WRIT
+#if !FFI_MMAP_EXEC_WRIT && !FFI_EXEC_TRAMPOLINE_TABLE
 # if __gnu_linux__
 /* This macro indicates it may be forbidden to map anonymous memory
    with both write and execute permission.  Code compiled when this
@@ -44,7 +45,7 @@
 #  define FFI_MMAP_EXEC_WRIT 1
 #  define HAVE_MNTENT 1
 # endif
-# if defined(X86_WIN32) || defined(X86_WIN64)
+# if defined(X86_WIN32) || defined(X86_WIN64) || defined(__OS2__)
 /* Windows systems may have Data Execution Protection (DEP) enabled, 
    which requires the use of VirtualMalloc/VirtualFree to alloc/free
    executable memory. */
@@ -63,7 +64,11 @@
 
 #if FFI_CLOSURES
 
-# if FFI_MMAP_EXEC_WRIT
+# if FFI_EXEC_TRAMPOLINE_TABLE
+
+// Per-target implementation; It's unclear what can reasonable be shared between two OS/architecture implementations.
+
+# elif FFI_MMAP_EXEC_WRIT /* !FFI_EXEC_TRAMPOLINE_TABLE */
 
 #define USE_LOCKS 1
 #define USE_DL_PREFIX 1
@@ -146,7 +151,7 @@
       p = strchr (p + 1, ' ');
       if (p == NULL)
         break;
-      if (strncmp (p + 1, "selinuxfs ", 10) != 0)
+      if (strncmp (p + 1, "selinuxfs ", 10) == 0)
         {
           free (buf);
           fclose (f);
@@ -167,7 +172,26 @@
 
 #endif /* !FFI_MMAP_EXEC_SELINUX */
 
-#elif defined (__CYGWIN__)
+/* On PaX enable kernels that have MPROTECT enable we can't use PROT_EXEC. */
+#ifdef FFI_MMAP_EXEC_EMUTRAMP_PAX
+#include <stdlib.h>
+
+static int emutramp_enabled = -1;
+
+static int
+emutramp_enabled_check (void)
+{
+  if (getenv ("FFI_DISABLE_EMUTRAMP") == NULL)
+    return 1;
+  else
+    return 0;
+}
+
+#define is_emutramp_enabled() (emutramp_enabled >= 0 ? emutramp_enabled \
+                               : (emutramp_enabled = emutramp_enabled_check ()))
+#endif /* FFI_MMAP_EXEC_EMUTRAMP_PAX */
+
+#elif defined (__CYGWIN__) || defined(__INTERIX)
 
 #include <sys/mman.h>
 
@@ -176,6 +200,10 @@
 
 #endif /* !defined(X86_WIN32) && !defined(X86_WIN64) */
 
+#ifndef FFI_MMAP_EXEC_EMUTRAMP_PAX
+#define is_emutramp_enabled() 0
+#endif /* FFI_MMAP_EXEC_EMUTRAMP_PAX */
+
 /* Declare all functions defined in dlmalloc.c as static.  */
 static void *dlmalloc(size_t);
 static void dlfree(void*);
@@ -193,11 +221,11 @@
 static size_t dlmalloc_usable_size(void*) MAYBE_UNUSED;
 static void dlmalloc_stats(void) MAYBE_UNUSED;
 
-#if !(defined(X86_WIN32) || defined(X86_WIN64)) || defined (__CYGWIN__)
+#if !(defined(X86_WIN32) || defined(X86_WIN64) || defined(__OS2__)) || defined (__CYGWIN__) || defined(__INTERIX)
 /* Use these for mmap and munmap within dlmalloc.c.  */
 static void *dlmmap(void *, size_t, int, int, int, off_t);
 static int dlmunmap(void *, size_t);
-#endif /* !(defined(X86_WIN32) || defined(X86_WIN64)) || defined (__CYGWIN__) */
+#endif /* !(defined(X86_WIN32) || defined(X86_WIN64) || defined(__OS2__)) || defined (__CYGWIN__) || defined(__INTERIX) */
 
 #define mmap dlmmap
 #define munmap dlmunmap
@@ -207,7 +235,7 @@
 #undef mmap
 #undef munmap
 
-#if !(defined(X86_WIN32) || defined(X86_WIN64)) || defined (__CYGWIN__)
+#if !(defined(X86_WIN32) || defined(X86_WIN64) || defined(__OS2__)) || defined (__CYGWIN__) || defined(__INTERIX)
 
 /* A mutex used to synchronize access to *exec* variables in this file.  */
 static pthread_mutex_t open_temp_exec_file_mutex = PTHREAD_MUTEX_INITIALIZER;
@@ -294,7 +322,7 @@
       struct mntent mnt;
       char buf[MAXPATHLEN * 3];
 
-      if (getmntent_r (last_mntent, &mnt, buf, sizeof (buf)))
+      if (getmntent_r (last_mntent, &mnt, buf, sizeof (buf)) == NULL)
 	return -1;
 
       if (hasmntopt (&mnt, "ro")
@@ -453,6 +481,12 @@
   printf ("mapping in %zi\n", length);
 #endif
 
+  if (execfd == -1 && is_emutramp_enabled ())
+    {
+      ptr = mmap (start, length, prot & ~PROT_EXEC, flags, fd, offset);
+      return ptr;
+    }
+
   if (execfd == -1 && !is_selinux_enabled ())
     {
       ptr = mmap (start, length, prot | PROT_EXEC, flags, fd, offset);
@@ -522,7 +556,7 @@
 }
 #endif
 
-#endif /* !(defined(X86_WIN32) || defined(X86_WIN64)) || defined (__CYGWIN__) */
+#endif /* !(defined(X86_WIN32) || defined(X86_WIN64) || defined(__OS2__)) || defined (__CYGWIN__) || defined(__INTERIX) */
 
 /* Allocate a chunk of memory with the given size.  Returns a pointer
    to the writable address, and sets *CODE to the executable
diff --git a/Modules/_ctypes/libffi/src/cris/ffi.c b/Modules/_ctypes/libffi/src/cris/ffi.c
index e9c3953..aaca5b1 100644
--- a/Modules/_ctypes/libffi/src/cris/ffi.c
+++ b/Modules/_ctypes/libffi/src/cris/ffi.c
@@ -153,21 +153,24 @@
   return (struct_count);
 }
 
-ffi_status
-ffi_prep_cif (ffi_cif * cif,
-	      ffi_abi abi, unsigned int nargs,
-	      ffi_type * rtype, ffi_type ** atypes)
+ffi_status FFI_HIDDEN
+ffi_prep_cif_core (ffi_cif * cif,
+	           ffi_abi abi, unsigned int isvariadic,
+		   unsigned int nfixedargs, unsigned int ntotalargs,
+	           ffi_type * rtype, ffi_type ** atypes)
 {
   unsigned bytes = 0;
   unsigned int i;
   ffi_type **ptr;
 
   FFI_ASSERT (cif != NULL);
-  FFI_ASSERT ((abi > FFI_FIRST_ABI) && (abi <= FFI_DEFAULT_ABI));
+  FFI_ASSERT((!isvariadic) || (nfixedargs >= 1));
+  FFI_ASSERT(nfixedargs <= ntotalargs);
+  FFI_ASSERT (abi > FFI_FIRST_ABI && abi < FFI_LAST_ABI);
 
   cif->abi = abi;
   cif->arg_types = atypes;
-  cif->nargs = nargs;
+  cif->nargs = ntotalargs;
   cif->rtype = rtype;
 
   cif->flags = 0;
diff --git a/Modules/_ctypes/libffi/src/cris/ffitarget.h b/Modules/_ctypes/libffi/src/cris/ffitarget.h
index 4257f10..b837e97 100644
--- a/Modules/_ctypes/libffi/src/cris/ffitarget.h
+++ b/Modules/_ctypes/libffi/src/cris/ffitarget.h
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003  Red Hat, Inc.
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 1996-2003  Red Hat, Inc.
    Target configuration macros for CRIS.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -27,6 +28,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 #ifndef LIBFFI_ASM
 typedef unsigned long          ffi_arg;
 typedef signed long            ffi_sarg;
@@ -34,8 +39,8 @@
 typedef enum ffi_abi {
   FFI_FIRST_ABI = 0,
   FFI_SYSV,
-  FFI_DEFAULT_ABI = FFI_SYSV,
-  FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
+  FFI_LAST_ABI,
+  FFI_DEFAULT_ABI = FFI_SYSV
 } ffi_abi;
 #endif
 
diff --git a/Modules/_ctypes/libffi/src/dlmalloc.c b/Modules/_ctypes/libffi/src/dlmalloc.c
index 219f15e..5c9f9c2 100644
--- a/Modules/_ctypes/libffi/src/dlmalloc.c
+++ b/Modules/_ctypes/libffi/src/dlmalloc.c
@@ -100,7 +100,7 @@
 
        If you don't like either of these options, you can define
        CORRUPTION_ERROR_ACTION and USAGE_ERROR_ACTION to do anything
-       else. And if you are sure that your program using malloc has
+       else. And if if you are sure that your program using malloc has
        no errors or vulnerabilities, you can define INSECURE to 1,
        which might (or might not) provide a small performance improvement.
 
@@ -457,13 +457,16 @@
 #define LACKS_ERRNO_H
 #define MALLOC_FAILURE_ACTION
 #define MMAP_CLEARS 0 /* WINCE and some others apparently don't clear */
-#elif !defined _GNU_SOURCE
-/* mremap() on Linux requires this via sys/mman.h
- * See roundup issue 10309
- */
-#define _GNU_SOURCE 1
 #endif  /* WIN32 */
 
+#ifdef __OS2__
+#define INCL_DOS
+#include <os2.h>
+#define HAVE_MMAP 1
+#define HAVE_MORECORE 0
+#define LACKS_SYS_MMAN_H
+#endif  /* __OS2__ */
+
 #if defined(DARWIN) || defined(_DARWIN)
 /* Mac OSX docs advise not to use sbrk; it seems better to use mmap */
 #ifndef HAVE_MORECORE
@@ -599,7 +602,7 @@
   declaration needed is the mallinfo struct that is returned (by-copy)
   by mallinfo().  The malloinfo struct contains a bunch of fields that
   are not even meaningful in this version of malloc.  These fields are
-  instead filled by mallinfo() with other numbers that might be of
+  are instead filled by mallinfo() with other numbers that might be of
   interest.
 
   HAVE_USR_INCLUDE_MALLOC_H should be set if you have a
@@ -619,6 +622,9 @@
 #include "/usr/include/malloc.h"
 #else /* HAVE_USR_INCLUDE_MALLOC_H */
 
+/* HP-UX's stdlib.h redefines mallinfo unless _STRUCT_MALLINFO is defined */
+#define _STRUCT_MALLINFO
+
 struct mallinfo {
   MALLINFO_FIELD_TYPE arena;    /* non-mmapped space allocated from system */
   MALLINFO_FIELD_TYPE ordblks;  /* number of free chunks */
@@ -1293,7 +1299,7 @@
 #define IS_MMAPPED_BIT       (SIZE_T_ONE)
 #define USE_MMAP_BIT         (SIZE_T_ONE)
 
-#ifndef WIN32
+#if !defined(WIN32) && !defined (__OS2__)
 #define CALL_MUNMAP(a, s)    munmap((a), (s))
 #define MMAP_PROT            (PROT_READ|PROT_WRITE)
 #if !defined(MAP_ANONYMOUS) && defined(MAP_ANON)
@@ -1316,6 +1322,42 @@
 #endif /* MAP_ANONYMOUS */
 
 #define DIRECT_MMAP(s)       CALL_MMAP(s)
+
+#elif defined(__OS2__)
+
+/* OS/2 MMAP via DosAllocMem */
+static void* os2mmap(size_t size) {
+  void* ptr;
+  if (DosAllocMem(&ptr, size, OBJ_ANY|PAG_COMMIT|PAG_READ|PAG_WRITE) &&
+      DosAllocMem(&ptr, size, PAG_COMMIT|PAG_READ|PAG_WRITE))
+    return MFAIL;
+  return ptr;
+}
+
+#define os2direct_mmap(n)     os2mmap(n)
+
+/* This function supports releasing coalesed segments */
+static int os2munmap(void* ptr, size_t size) {
+  while (size) {
+    ULONG ulSize = size;
+    ULONG ulFlags = 0;
+    if (DosQueryMem(ptr, &ulSize, &ulFlags) != 0)
+      return -1;
+    if ((ulFlags & PAG_BASE) == 0 ||(ulFlags & PAG_COMMIT) == 0 ||
+        ulSize > size)
+      return -1;
+    if (DosFreeMem(ptr) != 0)
+      return -1;
+    ptr = ( void * ) ( ( char * ) ptr + ulSize );
+    size -= ulSize;
+  }
+  return 0;
+}
+
+#define CALL_MMAP(s)         os2mmap(s)
+#define CALL_MUNMAP(a, s)    os2munmap((a), (s))
+#define DIRECT_MMAP(s)       os2direct_mmap(s)
+
 #else /* WIN32 */
 
 /* Win32 MMAP via VirtualAlloc */
@@ -1392,7 +1434,7 @@
     unique mparams values are initialized only once.
 */
 
-#ifndef WIN32
+#if !defined(WIN32) && !defined(__OS2__)
 /* By default use posix locks */
 #include <pthread.h>
 #define MLOCK_T pthread_mutex_t
@@ -1406,6 +1448,16 @@
 
 static MLOCK_T magic_init_mutex = PTHREAD_MUTEX_INITIALIZER;
 
+#elif defined(__OS2__)
+#define MLOCK_T HMTX
+#define INITIAL_LOCK(l)      DosCreateMutexSem(0, l, 0, FALSE)
+#define ACQUIRE_LOCK(l)      DosRequestMutexSem(*l, SEM_INDEFINITE_WAIT)
+#define RELEASE_LOCK(l)      DosReleaseMutexSem(*l)
+#if HAVE_MORECORE
+static MLOCK_T morecore_mutex;
+#endif /* HAVE_MORECORE */
+static MLOCK_T magic_init_mutex;
+
 #else /* WIN32 */
 /*
    Because lock-protected regions have bounded times, and there
@@ -1564,7 +1616,7 @@
   Each freshly allocated chunk must have both cinuse and pinuse set.
   That is, each allocated chunk borders either a previously allocated
   and still in-use chunk, or the base of its memory arena. This is
-  ensured by making all allocations from the `lowest' part of any
+  ensured by making all allocations from the the `lowest' part of any
   found chunk.  Further, no free chunk physically borders another one,
   so each free chunk is known to be preceded and followed by either
   inuse chunks or the ends of memory.
@@ -1770,12 +1822,12 @@
   of the same size are arranged in a circularly-linked list, with only
   the oldest chunk (the next to be used, in our FIFO ordering)
   actually in the tree.  (Tree members are distinguished by a non-null
-  parent pointer.)  If a chunk with the same size as an existing node
+  parent pointer.)  If a chunk with the same size an an existing node
   is inserted, it is linked off the existing node using pointers that
   work in the same way as fd/bk pointers of small chunks.
 
   Each tree contains a power of 2 sized range of chunk sizes (the
-  smallest is 0x100 <= x < 0x180), which is divided in half at each
+  smallest is 0x100 <= x < 0x180), which is is divided in half at each
   tree level, with the chunks in the smaller half of the range (0x100
   <= x < 0x140 for the top nose) in the left subtree and the larger
   half (0x140 <= x < 0x180) in the right subtree.  This is, of course,
@@ -2497,10 +2549,15 @@
     }
     RELEASE_MAGIC_INIT_LOCK();
 
-#ifndef WIN32
+#if !defined(WIN32) && !defined(__OS2__)
     mparams.page_size = malloc_getpagesize;
     mparams.granularity = ((DEFAULT_GRANULARITY != 0)?
                            DEFAULT_GRANULARITY : mparams.page_size);
+#elif defined (__OS2__)
+ /* if low-memory is used, os2munmap() would break
+    if it were anything other than 64k */
+    mparams.page_size = 4096u;
+    mparams.granularity = 65536u;
 #else /* WIN32 */
     {
       SYSTEM_INFO system_info;
@@ -3380,7 +3437,7 @@
     least-preferred order):
     1. A call to MORECORE that can normally contiguously extend memory.
        (disabled if not MORECORE_CONTIGUOUS or not HAVE_MORECORE or
-       main space is mmapped or a previous contiguous call failed)
+       or main space is mmapped or a previous contiguous call failed)
     2. A call to MMAP new space (disabled if not HAVE_MMAP).
        Note that under the default settings, if MORECORE is unable to
        fulfill a request, and HAVE_MMAP is true, then mmap is
@@ -4197,7 +4254,7 @@
 
 void dlfree(void* mem) {
   /*
-     Consolidate freed chunks with preceeding or succeeding bordering
+     Consolidate freed chunks with preceding or succeeding bordering
      free chunks, if they exist, and then place in a bin.  Intermixed
      with special cases for top, dv, mmapped chunks, and usage errors.
   */
diff --git a/Modules/_ctypes/libffi/src/frv/ffitarget.h b/Modules/_ctypes/libffi/src/frv/ffitarget.h
index 1c319ea..d42540e 100644
--- a/Modules/_ctypes/libffi/src/frv/ffitarget.h
+++ b/Modules/_ctypes/libffi/src/frv/ffitarget.h
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2004  Red Hat, Inc.
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 1996-2004  Red Hat, Inc.
    Target configuration macros for FR-V
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -27,6 +28,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 /* ---- System specific configurations ----------------------------------- */
 
 #ifndef LIBFFI_ASM
@@ -35,13 +40,9 @@
 
 typedef enum ffi_abi {
   FFI_FIRST_ABI = 0,
-
-#ifdef FRV
   FFI_EABI,
-  FFI_DEFAULT_ABI = FFI_EABI,
-#endif
-
-  FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
+  FFI_LAST_ABI,
+  FFI_DEFAULT_ABI = FFI_EABI
 } ffi_abi;
 #endif
 
diff --git a/Modules/_ctypes/libffi/src/ia64/ffi.c b/Modules/_ctypes/libffi/src/ia64/ffi.c
index f637834..9533ef6 100644
--- a/Modules/_ctypes/libffi/src/ia64/ffi.c
+++ b/Modules/_ctypes/libffi/src/ia64/ffi.c
@@ -1,6 +1,7 @@
 /* -----------------------------------------------------------------------
-   ffi.c - Copyright (c) 1998, 2007, 2008 Red Hat, Inc.
+   ffi.c - Copyright (c) 1998, 2007, 2008, 2012 Red Hat, Inc.
 	   Copyright (c) 2000 Hewlett Packard Company
+	   Copyright (c) 2011 Anthony Green
    
    IA64 Foreign Function Interface 
 
@@ -84,7 +85,7 @@
 #define ldf_fill(result, addr)	\
   asm ("ldf.fill %0 = %1%P1" : "=f"(result) : "m"(*addr));
 
-/* Return the size of the C type associated with TYPE, which will
+/* Return the size of the C type associated with with TYPE.  Which will
    be one of the FFI_IA64_TYPE_HFA_* values.  */
 
 static size_t
@@ -184,7 +185,7 @@
       break;
 
     case FFI_TYPE_LONGDOUBLE:
-      /* Similarly, except that HFA is true for double extended,
+      /* Similarly, except that that HFA is true for double extended,
 	 but not quad precision.  Both have sizeof == 16, so tell the
 	 difference based on the precision.  */
       if (LDBL_MANT_DIG == 64 && nested)
@@ -225,7 +226,7 @@
   int flags;
 
   /* Adjust cif->bytes to include space for the bits of the ia64_args frame
-     that preceeds the integer register portion.  The estimate that the 
+     that precedes the integer register portion.  The estimate that the
      generic bits did for the argument space required is good enough for the
      integer component.  */
   cif->bytes += offsetof(struct ia64_args, gp_regs[0]);
@@ -324,13 +325,17 @@
 	case FFI_TYPE_FLOAT:
 	  if (gpcount < 8 && fpcount < 8)
 	    stf_spill (&stack->fp_regs[fpcount++], *(float *)avalue[i]);
-	  stack->gp_regs[gpcount++] = *(UINT32 *)avalue[i];
+	  {
+	    UINT32 tmp;
+	    memcpy (&tmp, avalue[i], sizeof (UINT32));
+	    stack->gp_regs[gpcount++] = tmp;
+	  }
 	  break;
 
 	case FFI_TYPE_DOUBLE:
 	  if (gpcount < 8 && fpcount < 8)
 	    stf_spill (&stack->fp_regs[fpcount++], *(double *)avalue[i]);
-	  stack->gp_regs[gpcount++] = *(UINT64 *)avalue[i];
+	  memcpy (&stack->gp_regs[gpcount++], avalue[i], sizeof (UINT64));
 	  break;
 
 	case FFI_TYPE_LONGDOUBLE:
@@ -425,7 +430,8 @@
   struct ffi_ia64_trampoline_struct *tramp;
   struct ia64_fd *fd;
 
-  FFI_ASSERT (cif->abi == FFI_UNIX);
+  if (cif->abi != FFI_UNIX)
+    return FFI_BAD_ABI;
 
   tramp = (struct ffi_ia64_trampoline_struct *)closure->tramp;
   fd = (struct ia64_fd *)(void *)ffi_closure_unix;
diff --git a/Modules/_ctypes/libffi/src/ia64/ffitarget.h b/Modules/_ctypes/libffi/src/ia64/ffitarget.h
index d85c049..e68cea6 100644
--- a/Modules/_ctypes/libffi/src/ia64/ffitarget.h
+++ b/Modules/_ctypes/libffi/src/ia64/ffitarget.h
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003  Red Hat, Inc.
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 1996-2003  Red Hat, Inc.
    Target configuration macros for IA-64.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -27,6 +28,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 #ifndef LIBFFI_ASM
 typedef unsigned long long          ffi_arg;
 typedef signed long long            ffi_sarg;
@@ -34,8 +39,8 @@
 typedef enum ffi_abi {
   FFI_FIRST_ABI = 0,
   FFI_UNIX,   	/* Linux and all Unix variants use the same conventions	*/
-  FFI_DEFAULT_ABI = FFI_UNIX,
-  FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
+  FFI_LAST_ABI,
+  FFI_DEFAULT_ABI = FFI_UNIX
 } ffi_abi;
 #endif
 
diff --git a/Modules/_ctypes/libffi/src/java_raw_api.c b/Modules/_ctypes/libffi/src/java_raw_api.c
index 9c5383e..522c8bf 100644
--- a/Modules/_ctypes/libffi/src/java_raw_api.c
+++ b/Modules/_ctypes/libffi/src/java_raw_api.c
@@ -311,7 +311,7 @@
   ffi_raw_closure *cl = (ffi_raw_closure*)user_data;
 
   ffi_java_ptrarray_to_raw (cif, avalue, raw);
-  (*cl->fun) (cif, rvalue, raw, cl->user_data);
+  (*cl->fun) (cif, rvalue, (ffi_raw*)raw, cl->user_data);
   ffi_java_raw_to_rvalue (cif, rvalue);
 }
 
diff --git a/Modules/_ctypes/libffi/src/m32r/ffitarget.h b/Modules/_ctypes/libffi/src/m32r/ffitarget.h
index 6a761f6..6c34801 100644
--- a/Modules/_ctypes/libffi/src/m32r/ffitarget.h
+++ b/Modules/_ctypes/libffi/src/m32r/ffitarget.h
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 2004  Renesas Technology.
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 2004  Renesas Technology.
    Target configuration macros for M32R.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -26,6 +27,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 /* ---- Generic type definitions ----------------------------------------- */
 
 #ifndef LIBFFI_ASM
@@ -36,8 +41,8 @@
   {
     FFI_FIRST_ABI = 0,
     FFI_SYSV,
-    FFI_DEFAULT_ABI = FFI_SYSV,
-    FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
+    FFI_LAST_ABI,
+    FFI_DEFAULT_ABI = FFI_SYSV
   } ffi_abi;
 #endif
 
diff --git a/Modules/_ctypes/libffi/src/m68k/ffi.c b/Modules/_ctypes/libffi/src/m68k/ffi.c
index 600cf20..0dee938 100644
--- a/Modules/_ctypes/libffi/src/m68k/ffi.c
+++ b/Modules/_ctypes/libffi/src/m68k/ffi.c
@@ -1,7 +1,7 @@
 /* -----------------------------------------------------------------------
    ffi.c
-   
-   m68k Foreign Function Interface 
+
+   m68k Foreign Function Interface
    ----------------------------------------------------------------------- */
 
 #include <ffi.h>
@@ -9,8 +9,17 @@
 
 #include <stdlib.h>
 #include <unistd.h>
+#ifdef __rtems__
+void rtems_cache_flush_multiple_data_lines( const void *, size_t );
+#else
 #include <sys/syscall.h>
+#ifdef __MINT__
+#include <mint/mintbind.h>
+#include <mint/ssystem.h>
+#else
 #include <asm/cachectl.h>
+#endif
+#endif
 
 void ffi_call_SYSV (extended_cif *,
 		    unsigned, unsigned,
@@ -35,8 +44,12 @@
 
   argp = stack;
 
-  if (ecif->cif->rtype->type == FFI_TYPE_STRUCT
-      && !ecif->cif->flags)
+  if (
+#ifdef __MINT__
+      (ecif->cif->rtype->type == FFI_TYPE_LONGDOUBLE) ||
+#endif
+      (((ecif->cif->rtype->type == FFI_TYPE_STRUCT)
+        && !ecif->cif->flags)))
     struct_value_ptr = ecif->rvalue;
   else
     struct_value_ptr = NULL;
@@ -47,12 +60,12 @@
        i != 0;
        i--, p_arg++)
     {
-      size_t z;
+      size_t z = (*p_arg)->size;
+      int type = (*p_arg)->type;
 
-      z = (*p_arg)->size;
       if (z < sizeof (int))
 	{
-	  switch ((*p_arg)->type)
+	  switch (type)
 	    {
 	    case FFI_TYPE_SINT8:
 	      *(signed int *) argp = (signed int) *(SINT8 *) *p_argv;
@@ -71,7 +84,14 @@
 	      break;
 
 	    case FFI_TYPE_STRUCT:
+#ifdef __MINT__
+	      if (z == 1 || z == 2)
+		memcpy (argp + 2, *p_argv, z);
+              else
+		memcpy (argp, *p_argv, z);
+#else
 	      memcpy (argp + sizeof (int) - z, *p_argv, z);
+#endif
 	      break;
 
 	    default:
@@ -103,6 +123,8 @@
 #define CIF_FLAGS_POINTER	32
 #define CIF_FLAGS_STRUCT1	64
 #define CIF_FLAGS_STRUCT2	128
+#define CIF_FLAGS_SINT8		256
+#define CIF_FLAGS_SINT16	512
 
 /* Perform machine dependent cif processing */
 ffi_status
@@ -116,17 +138,34 @@
       break;
 
     case FFI_TYPE_STRUCT:
+      if (cif->rtype->elements[0]->type == FFI_TYPE_STRUCT &&
+          cif->rtype->elements[1])
+        {
+          cif->flags = 0;
+          break;
+        }
+
       switch (cif->rtype->size)
 	{
 	case 1:
+#ifdef __MINT__
+	  cif->flags = CIF_FLAGS_STRUCT2;
+#else
 	  cif->flags = CIF_FLAGS_STRUCT1;
+#endif
 	  break;
 	case 2:
 	  cif->flags = CIF_FLAGS_STRUCT2;
 	  break;
+#ifdef __MINT__
+	case 3:
+#endif
 	case 4:
 	  cif->flags = CIF_FLAGS_INT;
 	  break;
+#ifdef __MINT__
+	case 7:
+#endif
 	case 8:
 	  cif->flags = CIF_FLAGS_DINT;
 	  break;
@@ -144,9 +183,15 @@
       cif->flags = CIF_FLAGS_DOUBLE;
       break;
 
+#if (FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE)
     case FFI_TYPE_LONGDOUBLE:
+#ifdef __MINT__
+      cif->flags = 0;
+#else
       cif->flags = CIF_FLAGS_LDOUBLE;
+#endif
       break;
+#endif
 
     case FFI_TYPE_POINTER:
       cif->flags = CIF_FLAGS_POINTER;
@@ -157,6 +202,14 @@
       cif->flags = CIF_FLAGS_DINT;
       break;
 
+    case FFI_TYPE_SINT16:
+      cif->flags = CIF_FLAGS_SINT16;
+      break;
+
+    case FFI_TYPE_SINT8:
+      cif->flags = CIF_FLAGS_SINT8;
+      break;
+
     default:
       cif->flags = CIF_FLAGS_INT;
       break;
@@ -212,6 +265,26 @@
       size_t z;
 
       z = (*p_arg)->size;
+#ifdef __MINT__
+      if (cif->flags &&
+          cif->rtype->type == FFI_TYPE_STRUCT &&
+          (z == 1 || z == 2))
+ 	{
+	  *p_argv = (void *) (argp + 2);
+
+	  z = 4;
+	}
+      else
+      if (cif->flags &&
+          cif->rtype->type == FFI_TYPE_STRUCT &&
+          (z == 3 || z == 4))
+ 	{
+	  *p_argv = (void *) (argp);
+
+	  z = 4;
+	}
+      else
+#endif
       if (z <= 4)
 	{
 	  *p_argv = (void *) (argp + 4 - z);
@@ -255,19 +328,31 @@
 		      void *user_data,
 		      void *codeloc)
 {
-  FFI_ASSERT (cif->abi == FFI_SYSV);
+  if (cif->abi != FFI_SYSV)
+    return FFI_BAD_ABI;
 
   *(unsigned short *)closure->tramp = 0x207c;
   *(void **)(closure->tramp + 2) = codeloc;
   *(unsigned short *)(closure->tramp + 6) = 0x4ef9;
-  if (cif->rtype->type == FFI_TYPE_STRUCT
-      && !cif->flags)
+
+  if (
+#ifdef __MINT__
+      (cif->rtype->type == FFI_TYPE_LONGDOUBLE) ||
+#endif
+      (((cif->rtype->type == FFI_TYPE_STRUCT)
+         && !cif->flags)))
     *(void **)(closure->tramp + 8) = ffi_closure_struct_SYSV;
   else
     *(void **)(closure->tramp + 8) = ffi_closure_SYSV;
 
+#ifdef __rtems__
+  rtems_cache_flush_multiple_data_lines( codeloc, FFI_TRAMPOLINE_SIZE );
+#elif defined(__MINT__)
+  Ssystem(S_FLUSHCACHE, codeloc, FFI_TRAMPOLINE_SIZE);
+#else
   syscall(SYS_cacheflush, codeloc, FLUSH_SCOPE_LINE,
 	  FLUSH_CACHE_BOTH, FFI_TRAMPOLINE_SIZE);
+#endif
 
   closure->cif  = cif;
   closure->user_data = user_data;
@@ -275,4 +360,3 @@
 
   return FFI_OK;
 }
-
diff --git a/Modules/_ctypes/libffi/src/m68k/ffitarget.h b/Modules/_ctypes/libffi/src/m68k/ffitarget.h
index 633717b..e81dde2 100644
--- a/Modules/_ctypes/libffi/src/m68k/ffitarget.h
+++ b/Modules/_ctypes/libffi/src/m68k/ffitarget.h
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003  Red Hat, Inc.
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 1996-2003  Red Hat, Inc.
    Target configuration macros for Motorola 68K.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -27,6 +28,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 #ifndef LIBFFI_ASM
 typedef unsigned long          ffi_arg;
 typedef signed long            ffi_sarg;
@@ -34,8 +39,8 @@
 typedef enum ffi_abi {
   FFI_FIRST_ABI = 0,
   FFI_SYSV,
-  FFI_DEFAULT_ABI = FFI_SYSV,
-  FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
+  FFI_LAST_ABI,
+  FFI_DEFAULT_ABI = FFI_SYSV
 } ffi_abi;
 #endif
 
diff --git a/Modules/_ctypes/libffi/src/m68k/sysv.S b/Modules/_ctypes/libffi/src/m68k/sysv.S
index 58822e0..ec2b14f 100644
--- a/Modules/_ctypes/libffi/src/m68k/sysv.S
+++ b/Modules/_ctypes/libffi/src/m68k/sysv.S
@@ -1,8 +1,11 @@
 /* -----------------------------------------------------------------------
-   sysv.S - Copyright (c) 1998 Andreas Schwab
-	    Copyright (c) 2008 Red Hat, Inc. 
-   
-   m68k Foreign Function Interface 
+	
+   sysv.S - Copyright (c) 2012 Alan Hourihane
+	    Copyright (c) 1998, 2012 Andreas Schwab
+	    Copyright (c) 2008 Red Hat, Inc.
+	    Copyright (c) 2012 Thorsten Glaser
+
+   m68k Foreign Function Interface
 
    Permission is hereby granted, free of charge, to any person obtaining
    a copy of this software and associated documentation files (the
@@ -41,13 +44,19 @@
 #define CFI_ENDPROC()
 #endif
 
+#ifdef __MINT__
+#define CALLFUNC(funcname) _ ## funcname
+#else
+#define CALLFUNC(funcname) funcname
+#endif
+
 	.text
 
-	.globl	ffi_call_SYSV
-	.type	ffi_call_SYSV,@function
+	.globl	CALLFUNC(ffi_call_SYSV)
+	.type	CALLFUNC(ffi_call_SYSV),@function
 	.align	4
 
-ffi_call_SYSV:
+CALLFUNC(ffi_call_SYSV):
 	CFI_STARTPROC()
 	link	%fp,#0
 	CFI_OFFSET(14,-8)
@@ -62,14 +71,18 @@
 	move.l	8(%fp),-(%sp)
 	pea	4(%sp)
 #if !defined __PIC__
-	jsr	ffi_prep_args
+	jsr	CALLFUNC(ffi_prep_args)
 #else
-	bsr.l	ffi_prep_args@PLTPC
+	bsr.l	CALLFUNC(ffi_prep_args@PLTPC)
 #endif
 	addq.l	#8,%sp	
 
 	| Pass pointer to struct value, if any
+#ifdef __MINT__
+	move.l	%d0,%a1
+#else
 	move.l	%a0,%a1
+#endif
 
 	| Call the function
 	move.l	24(%fp),%a0
@@ -85,7 +98,12 @@
 	move.l	16(%fp),%d2
 
 	| If the return value pointer is NULL, assume no return value.
+	| NOTE: On the mc68000, tst on an address register is not supported.
+#if !defined(__mc68020__) && !defined(__mc68030__) && !defined(__mc68040__) && !defined(__mc68060__) && !defined(__mcoldfire__)
+	cmp.w	#0, %a1
+#else
 	tst.l	%a1
+#endif
 	jbeq	noretval
 
 	btst	#0,%d2
@@ -103,25 +121,44 @@
 retfloat:
 	btst	#2,%d2
 	jbeq	retdouble
+#if defined(__MC68881__) || defined(__HAVE_68881__)
 	fmove.s	%fp0,(%a1)
+#else
+	move.l	%d0,(%a1)
+#endif
 	jbra	epilogue
 
 retdouble:
 	btst	#3,%d2
 	jbeq	retlongdouble
+#if defined(__MC68881__) || defined(__HAVE_68881__)
 	fmove.d	%fp0,(%a1)
+#else
+	move.l	%d0,(%a1)+
+	move.l	%d1,(%a1)
+#endif
 	jbra	epilogue
 
 retlongdouble:
 	btst	#4,%d2
 	jbeq	retpointer
+#if defined(__MC68881__) || defined(__HAVE_68881__)
 	fmove.x	%fp0,(%a1)
+#else
+	move.l	%d0,(%a1)+
+	move.l	%d1,(%a1)+
+	move.l	%d2,(%a1)
+#endif
 	jbra	epilogue
 
 retpointer:
 	btst	#5,%d2
 	jbeq	retstruct1
+#ifdef __MINT__
+	move.l	%d0,(%a1)
+#else
 	move.l	%a0,(%a1)
+#endif
 	jbra	epilogue
 
 retstruct1:
@@ -132,8 +169,28 @@
 
 retstruct2:
 	btst	#7,%d2
-	jbeq	noretval
+	jbeq	retsint8
 	move.w	%d0,(%a1)
+	jbra	epilogue
+
+retsint8:
+	btst	#8,%d2
+	jbeq	retsint16
+	| NOTE: On the mc68000, extb is not supported. 8->16, then 16->32.
+#if !defined(__mc68020__) && !defined(__mc68030__) && !defined(__mc68040__) && !defined(__mc68060__) && !defined(__mcoldfire__)
+	ext.w	%d0
+	ext.l	%d0
+#else
+	extb.l	%d0
+#endif
+	move.l	%d0,(%a1)
+	jbra	epilogue
+
+retsint16:
+	btst	#9,%d2
+	jbeq	noretval
+	ext.l	%d0
+	move.l	%d0,(%a1)
 
 noretval:
 epilogue:
@@ -141,13 +198,13 @@
 	unlk	%fp
 	rts
 	CFI_ENDPROC()
-	.size	ffi_call_SYSV,.-ffi_call_SYSV
+	.size	CALLFUNC(ffi_call_SYSV),.-CALLFUNC(ffi_call_SYSV)
 
-	.globl	ffi_closure_SYSV
-	.type	ffi_closure_SYSV, @function
+	.globl	CALLFUNC(ffi_closure_SYSV)
+	.type	CALLFUNC(ffi_closure_SYSV), @function
 	.align	4
 
-ffi_closure_SYSV:
+CALLFUNC(ffi_closure_SYSV):
 	CFI_STARTPROC()
 	link	%fp,#-12
 	CFI_OFFSET(14,-8)
@@ -157,16 +214,18 @@
 	pea	-12(%fp)
 	move.l	%a0,-(%sp)
 #if !defined __PIC__
-	jsr	ffi_closure_SYSV_inner
+	jsr	CALLFUNC(ffi_closure_SYSV_inner)
 #else
-	bsr.l	ffi_closure_SYSV_inner@PLTPC
+	bsr.l	CALLFUNC(ffi_closure_SYSV_inner@PLTPC)
 #endif
 
 	lsr.l	#1,%d0
 	jne	1f
 	jcc	.Lcls_epilogue
+	| CIF_FLAGS_INT
 	move.l	-12(%fp),%d0
 .Lcls_epilogue:
+	| no CIF_FLAGS_*
 	unlk	%fp
 	rts
 1:
@@ -174,43 +233,80 @@
 	lsr.l	#2,%d0
 	jne	1f
 	jcs	.Lcls_ret_float
+	| CIF_FLAGS_DINT
 	move.l	(%a0)+,%d0
 	move.l	(%a0),%d1
 	jra	.Lcls_epilogue
 .Lcls_ret_float:
+#if defined(__MC68881__) || defined(__HAVE_68881__)
 	fmove.s	(%a0),%fp0
+#else
+	move.l	(%a0),%d0
+#endif
 	jra	.Lcls_epilogue
 1:
 	lsr.l	#2,%d0
 	jne	1f
 	jcs	.Lcls_ret_ldouble
+	| CIF_FLAGS_DOUBLE
+#if defined(__MC68881__) || defined(__HAVE_68881__)
 	fmove.d	(%a0),%fp0
+#else
+	move.l	(%a0)+,%d0
+	move.l	(%a0),%d1
+#endif
 	jra	.Lcls_epilogue
 .Lcls_ret_ldouble:
+#if defined(__MC68881__) || defined(__HAVE_68881__)
 	fmove.x	(%a0),%fp0
+#else
+	move.l	(%a0)+,%d0
+	move.l	(%a0)+,%d1
+	move.l	(%a0),%d2
+#endif
 	jra	.Lcls_epilogue
 1:
 	lsr.l	#2,%d0
-	jne	.Lcls_ret_struct2
+	jne	1f
 	jcs	.Lcls_ret_struct1
+	| CIF_FLAGS_POINTER
 	move.l	(%a0),%a0
 	move.l	%a0,%d0
 	jra	.Lcls_epilogue
 .Lcls_ret_struct1:
 	move.b	(%a0),%d0
 	jra	.Lcls_epilogue
-.Lcls_ret_struct2:
+1:
+	lsr.l	#2,%d0
+	jne	1f
+	jcs	.Lcls_ret_sint8
+	| CIF_FLAGS_STRUCT2
 	move.w	(%a0),%d0
 	jra	.Lcls_epilogue
+.Lcls_ret_sint8:
+	move.l	(%a0),%d0
+	| NOTE: On the mc68000, extb is not supported. 8->16, then 16->32.
+#if !defined(__mc68020__) && !defined(__mc68030__) && !defined(__mc68040__) && !defined(__mc68060__) && !defined(__mcoldfire__)
+	ext.w	%d0
+	ext.l	%d0
+#else
+	extb.l	%d0
+#endif
+	jra	.Lcls_epilogue
+1:
+	| CIF_FLAGS_SINT16
+	move.l	(%a0),%d0
+	ext.l	%d0
+	jra	.Lcls_epilogue
 	CFI_ENDPROC()
 
-	.size	ffi_closure_SYSV,.-ffi_closure_SYSV
+	.size	CALLFUNC(ffi_closure_SYSV),.-CALLFUNC(ffi_closure_SYSV)
 
-	.globl	ffi_closure_struct_SYSV
-	.type	ffi_closure_struct_SYSV, @function
+	.globl	CALLFUNC(ffi_closure_struct_SYSV)
+	.type	CALLFUNC(ffi_closure_struct_SYSV), @function
 	.align	4
 
-ffi_closure_struct_SYSV:
+CALLFUNC(ffi_closure_struct_SYSV):
 	CFI_STARTPROC()
 	link	%fp,#0
 	CFI_OFFSET(14,-8)
@@ -220,14 +316,14 @@
 	move.l	%a1,-(%sp)
 	move.l	%a0,-(%sp)
 #if !defined __PIC__
-	jsr	ffi_closure_SYSV_inner
+	jsr	CALLFUNC(ffi_closure_SYSV_inner)
 #else
-	bsr.l	ffi_closure_SYSV_inner@PLTPC
+	bsr.l	CALLFUNC(ffi_closure_SYSV_inner@PLTPC)
 #endif
 	unlk	%fp
 	rts
 	CFI_ENDPROC()
-	.size	ffi_closure_struct_SYSV,.-ffi_closure_struct_SYSV
+	.size	CALLFUNC(ffi_closure_struct_SYSV),.-CALLFUNC(ffi_closure_struct_SYSV)
 
 #if defined __ELF__ && defined __linux__
 	.section	.note.GNU-stack,"",@progbits
diff --git a/Modules/_ctypes/libffi/src/metag/ffi.c b/Modules/_ctypes/libffi/src/metag/ffi.c
new file mode 100644
index 0000000..46b383e
--- /dev/null
+++ b/Modules/_ctypes/libffi/src/metag/ffi.c
@@ -0,0 +1,330 @@
+/* ----------------------------------------------------------------------
+  ffi.c - Copyright (c) 2013 Imagination Technologies
+
+  Meta Foreign Function Interface
+  Permission is hereby granted, free of charge, to any person obtaining
+  a copy of this software and associated documentation files (the
+  `Software''), to deal in the Software without restriction, including
+  without limitation the rights to use, copy, modify, merge, publish,
+  distribute, sublicense, and/or sell copies of the Software, and to
+  permit persons to whom the Software is furnished to do so, subject to
+  the following conditions:
+
+  The above copyright notice and this permission notice shall be included
+  in all copies or substantial portions of the Software.
+
+  THE SOFTWARE IS PROVIDED `AS IS'', WITHOUT WARRANTY OF ANY KIND, EXPRESS
+  OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+  IN NO EVENT SHALL SIMON POSNJAK BE LIABLE FOR ANY CLAIM, DAMAGES OR
+  OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+  ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+  OTHER DEALINGS IN THE SOFTWARE.
+----------------------------------------------------------------------- */
+
+#include <ffi.h>
+#include <ffi_common.h>
+
+#include <stdlib.h>
+
+#define MIN(a,b) (((a) < (b)) ? (a) : (b))
+
+/*
+ * ffi_prep_args is called by the assembly routine once stack space has been
+ * allocated for the function's arguments
+ */
+
+unsigned int ffi_prep_args(char *stack, extended_cif *ecif)
+{
+	register unsigned int i;
+	register void **p_argv;
+	register char *argp;
+	register ffi_type **p_arg;
+
+	argp = stack;
+
+	/* Store return value */
+	if ( ecif->cif->flags == FFI_TYPE_STRUCT ) {
+		argp -= 4;
+		*(void **) argp = ecif->rvalue;
+	}
+
+	p_argv = ecif->avalue;
+
+	/* point to next location */
+	for (i = ecif->cif->nargs, p_arg = ecif->cif->arg_types; (i != 0); i--, p_arg++, p_argv++)
+	{
+		size_t z;
+
+		/* Move argp to address of argument */
+		z = (*p_arg)->size;
+		argp -= z;
+
+		/* Align if necessary */
+		argp = (char *) ALIGN_DOWN(ALIGN_DOWN(argp, (*p_arg)->alignment), 4);
+
+		if (z < sizeof(int)) {
+			z = sizeof(int);
+			switch ((*p_arg)->type)
+			{
+			case FFI_TYPE_SINT8:
+				*(signed int *) argp = (signed int)*(SINT8 *)(* p_argv);
+				break;
+			case FFI_TYPE_UINT8:
+				*(unsigned int *) argp = (unsigned int)*(UINT8 *)(* p_argv);
+				break;
+			case FFI_TYPE_SINT16:
+				*(signed int *) argp = (signed int)*(SINT16 *)(* p_argv);
+				break;
+			case FFI_TYPE_UINT16:
+				*(unsigned int *) argp = (unsigned int)*(UINT16 *)(* p_argv);
+			case FFI_TYPE_STRUCT:
+				memcpy(argp, *p_argv, (*p_arg)->size);
+				break;
+			default:
+				FFI_ASSERT(0);
+			}
+		} else if ( z == sizeof(int)) {
+			*(unsigned int *) argp = (unsigned int)*(UINT32 *)(* p_argv);
+		} else {
+			memcpy(argp, *p_argv, z);
+		}
+	}
+
+	/* return the size of the arguments to be passed in registers,
+	   padded to an 8 byte boundary to preserve stack alignment */
+	return ALIGN(MIN(stack - argp, 6*4), 8);
+}
+
+/* Perform machine dependent cif processing */
+ffi_status ffi_prep_cif_machdep(ffi_cif *cif)
+{
+	ffi_type **ptr;
+	unsigned i, bytes = 0;
+
+	for (ptr = cif->arg_types, i = cif->nargs; i > 0; i--, ptr++) {
+		if ((*ptr)->size == 0)
+			return FFI_BAD_TYPEDEF;
+
+		/* Perform a sanity check on the argument type, do this
+		   check after the initialization.  */
+		FFI_ASSERT_VALID_TYPE(*ptr);
+
+		/* Add any padding if necessary */
+		if (((*ptr)->alignment - 1) & bytes)
+			bytes = ALIGN(bytes, (*ptr)->alignment);
+
+		bytes += ALIGN((*ptr)->size, 4);
+	}
+
+	/* Ensure arg space is aligned to an 8-byte boundary */
+	bytes = ALIGN(bytes, 8);
+
+	/* Make space for the return structure pointer */
+	if (cif->rtype->type == FFI_TYPE_STRUCT) {
+		bytes += sizeof(void*);
+
+		/* Ensure stack is aligned to an 8-byte boundary */
+		bytes = ALIGN(bytes, 8);
+	}
+
+	cif->bytes = bytes;
+
+	/* Set the return type flag */
+	switch (cif->rtype->type) {
+	case FFI_TYPE_VOID:
+	case FFI_TYPE_FLOAT:
+	case FFI_TYPE_DOUBLE:
+		cif->flags = (unsigned) cif->rtype->type;
+		break;
+	case FFI_TYPE_SINT64:
+	case FFI_TYPE_UINT64:
+		cif->flags = (unsigned) FFI_TYPE_SINT64;
+		break;
+	case FFI_TYPE_STRUCT:
+		/* Meta can store return values which are <= 64 bits */
+		if (cif->rtype->size <= 4)
+			/* Returned to D0Re0 as 32-bit value */
+			cif->flags = (unsigned)FFI_TYPE_INT;
+		else if ((cif->rtype->size > 4) && (cif->rtype->size <= 8))
+			/* Returned valued is stored to D1Re0|R0Re0 */
+			cif->flags = (unsigned)FFI_TYPE_DOUBLE;
+		else
+			/* value stored in memory */
+			cif->flags = (unsigned)FFI_TYPE_STRUCT;
+		break;
+	default:
+		cif->flags = (unsigned)FFI_TYPE_INT;
+		break;
+	}
+	return FFI_OK;
+}
+
+extern void ffi_call_SYSV(void (*fn)(void), extended_cif *, unsigned, unsigned, double *);
+
+/*
+ * Exported in API. Entry point
+ * cif -> ffi_cif object
+ * fn -> function pointer
+ * rvalue -> pointer to return value
+ * avalue -> vector of void * pointers pointing to memory locations holding the
+ * arguments
+ */
+void ffi_call(ffi_cif *cif, void (*fn)(void), void *rvalue, void **avalue)
+{
+	extended_cif ecif;
+
+	int small_struct = (((cif->flags == FFI_TYPE_INT) || (cif->flags == FFI_TYPE_DOUBLE)) && (cif->rtype->type == FFI_TYPE_STRUCT));
+	ecif.cif = cif;
+	ecif.avalue = avalue;
+
+	double temp;
+
+	/*
+	 * If the return value is a struct and we don't have a return value address
+	 * then we need to make one
+	 */
+
+	if ((rvalue == NULL ) && (cif->flags == FFI_TYPE_STRUCT))
+		ecif.rvalue = alloca(cif->rtype->size);
+	else if (small_struct)
+		ecif.rvalue = &temp;
+	else
+		ecif.rvalue = rvalue;
+
+	switch (cif->abi) {
+	case FFI_SYSV:
+		ffi_call_SYSV(fn, &ecif, cif->bytes, cif->flags, ecif.rvalue);
+		break;
+	default:
+		FFI_ASSERT(0);
+		break;
+	}
+
+	if (small_struct)
+		memcpy (rvalue, &temp, cif->rtype->size);
+}
+
+/* private members */
+
+static void ffi_prep_incoming_args_SYSV (char *, void **, void **,
+	ffi_cif*, float *);
+
+void ffi_closure_SYSV (ffi_closure *);
+
+/* Do NOT change that without changing the FFI_TRAMPOLINE_SIZE */
+extern unsigned int ffi_metag_trampoline[10]; /* 10 instructions */
+
+/* end of private members */
+
+/*
+ * __tramp: trampoline memory location
+ * __fun: assembly routine
+ * __ctx: memory location for wrapper
+ *
+ * At this point, tramp[0] == __ctx !
+ */
+void ffi_init_trampoline(unsigned char *__tramp, unsigned int __fun, unsigned int __ctx) {
+	memcpy (__tramp, ffi_metag_trampoline, sizeof(ffi_metag_trampoline));
+	*(unsigned int*) &__tramp[40] = __ctx;
+	*(unsigned int*) &__tramp[44] = __fun;
+	/* This will flush the instruction cache */
+	__builtin_meta2_cachewd(&__tramp[0], 1);
+	__builtin_meta2_cachewd(&__tramp[47], 1);
+}
+
+
+
+/* the cif must already be prepared */
+
+ffi_status
+ffi_prep_closure_loc (ffi_closure *closure,
+	ffi_cif* cif,
+	void (*fun)(ffi_cif*,void*,void**,void*),
+	void *user_data,
+	void *codeloc)
+{
+	void (*closure_func)(ffi_closure*) = NULL;
+
+	if (cif->abi == FFI_SYSV)
+		closure_func = &ffi_closure_SYSV;
+	else
+		return FFI_BAD_ABI;
+
+	ffi_init_trampoline(
+		(unsigned char*)&closure->tramp[0],
+		(unsigned int)closure_func,
+		(unsigned int)codeloc);
+
+	closure->cif = cif;
+	closure->user_data = user_data;
+	closure->fun = fun;
+
+	return FFI_OK;
+}
+
+
+/* This function is jumped to by the trampoline */
+unsigned int ffi_closure_SYSV_inner (closure, respp, args, vfp_args)
+	ffi_closure *closure;
+	void **respp;
+	void *args;
+	void *vfp_args;
+{
+	ffi_cif *cif;
+	void **arg_area;
+
+	cif = closure->cif;
+	arg_area = (void**) alloca (cif->nargs * sizeof (void*));
+
+	/*
+	 * This call will initialize ARG_AREA, such that each
+	 * element in that array points to the corresponding
+	 * value on the stack; and if the function returns
+	 * a structure, it will re-set RESP to point to the
+	 * structure return address.
+	 */
+	ffi_prep_incoming_args_SYSV(args, respp, arg_area, cif, vfp_args);
+
+	(closure->fun) ( cif, *respp, arg_area, closure->user_data);
+
+	return cif->flags;
+}
+
+static void ffi_prep_incoming_args_SYSV(char *stack, void **rvalue,
+	void **avalue, ffi_cif *cif,
+	float *vfp_stack)
+{
+	register unsigned int i;
+	register void **p_argv;
+	register char *argp;
+	register ffi_type **p_arg;
+
+	/* stack points to original arguments */
+	argp = stack;
+
+	/* Store return value */
+	if ( cif->flags == FFI_TYPE_STRUCT ) {
+		argp -= 4;
+		*rvalue = *(void **) argp;
+	}
+
+	p_argv = avalue;
+
+	for (i = cif->nargs, p_arg = cif->arg_types; (i != 0); i--, p_arg++) {
+		size_t z;
+		size_t alignment;
+
+		alignment = (*p_arg)->alignment;
+		if (alignment < 4)
+			alignment = 4;
+		if ((alignment - 1) & (unsigned)argp)
+			argp = (char *) ALIGN(argp, alignment);
+
+		z = (*p_arg)->size;
+		*p_argv = (void*) argp;
+		p_argv++;
+		argp -= z;
+	}
+	return;
+}
diff --git a/Modules/_ctypes/libffi/src/metag/ffitarget.h b/Modules/_ctypes/libffi/src/metag/ffitarget.h
new file mode 100644
index 0000000..7b9dbeb
--- /dev/null
+++ b/Modules/_ctypes/libffi/src/metag/ffitarget.h
@@ -0,0 +1,53 @@
+/* -----------------------------------------------------------------*-C-*-
+   ffitarget.h - Copyright (c) 2013 Imagination Technologies Ltd.
+   Target configuration macros for Meta
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   ``Software''), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+   NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+   HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+   WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+   OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+   DEALINGS IN THE SOFTWARE.
+
+   ----------------------------------------------------------------------- */
+
+#ifndef LIBFFI_TARGET_H
+#define LIBFFI_TARGET_H
+
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
+#ifndef LIBFFI_ASM
+typedef unsigned long          ffi_arg;
+typedef signed long            ffi_sarg;
+
+typedef enum ffi_abi {
+  FFI_FIRST_ABI = 0,
+  FFI_SYSV,
+  FFI_DEFAULT_ABI = FFI_SYSV,
+  FFI_LAST_ABI = FFI_DEFAULT_ABI + 1,
+} ffi_abi;
+#endif
+
+/* ---- Definitions for closures ----------------------------------------- */
+
+#define FFI_CLOSURES 1
+#define FFI_TRAMPOLINE_SIZE 48
+#define FFI_NATIVE_RAW_API 0
+
+#endif
+
diff --git a/Modules/_ctypes/libffi/src/metag/sysv.S b/Modules/_ctypes/libffi/src/metag/sysv.S
new file mode 100644
index 0000000..b4b2a3b
--- /dev/null
+++ b/Modules/_ctypes/libffi/src/metag/sysv.S
@@ -0,0 +1,311 @@
+/* -----------------------------------------------------------------------
+   sysv.S - Copyright (c) 2013 Imagination Technologies Ltd.
+
+   Meta Foreign Function Interface
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   ``Software''), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+
+   THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+   NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+   HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+   WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+   OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+   DEALINGS IN THE SOFTWARE.
+   ----------------------------------------------------------------------- */
+
+#define LIBFFI_ASM
+#include <fficonfig.h>
+#include <ffi.h>
+#ifdef HAVE_MACHINE_ASM_H
+#include <machine/asm.h>
+#else
+#ifdef __USER_LABEL_PREFIX__
+#define CONCAT1(a, b) CONCAT2(a, b)
+#define CONCAT2(a, b) a ## b
+
+/* Use the right prefix for global labels. */
+#define CNAME(x) CONCAT1 (__USER_LABEL_PREFIX__, x)
+#else
+#define CNAME(x) x
+#endif
+#define ENTRY(x) .globl CNAME(x); .type CNAME(x), %function; CNAME(x):
+#endif
+
+#ifdef __ELF__
+#define LSYM(x) .x
+#else
+#define LSYM(x) x
+#endif
+
+.macro call_reg x=
+	.text
+	.balign 4
+	mov D1RtP, \x
+	swap D1RtP, PC
+.endm
+
+! Save register arguments
+.macro SAVE_ARGS
+	.text
+	.balign 4
+	setl	[A0StP++], D0Ar6, D1Ar5
+	setl	[A0StP++], D0Ar4, D1Ar3
+	setl	[A0StP++], D0Ar2, D1Ar1
+.endm
+
+! Save retrun, frame pointer and other regs
+.macro SAVE_REGS regs=
+	.text
+	.balign 4
+	setl	[A0StP++], D0FrT, D1RtP
+	! Needs to be a pair of regs
+	.ifnc "\regs",""
+	setl	[A0StP++], \regs
+	.endif
+.endm
+
+! Declare a global function
+.macro METAG_FUNC_START name
+	.text
+	.balign 4
+	ENTRY(\name)
+.endm
+
+! Return registers from the stack. Reverse SAVE_REGS operation
+.macro RET_REGS regs=, cond=
+	.ifnc "\regs", ""
+	getl	\regs, [--A0StP]
+	.endif
+	getl	D0FrT, D1RtP, [--A0StP]
+.endm
+
+! Return arguments
+.macro RET_ARGS
+	getl	D0Ar2, D1Ar1, [--A0StP]
+	getl	D0Ar4, D1Ar3, [--A0StP]
+	getl	D0Ar6, D1Ar5, [--A0StP]
+.endm
+
+
+	! D1Ar1:	fn
+	! D0Ar2:	&ecif
+	! D1Ar3:	cif->bytes
+	! D0Ar4:	fig->flags
+	! D1Ar5:	ecif.rvalue
+
+	! This assumes we are using GNU as
+METAG_FUNC_START ffi_call_SYSV
+	! Save argument registers
+
+	SAVE_ARGS
+
+	! new frame
+	mov	D0FrT, A0FrP
+	add     A0FrP, A0StP, #0
+
+	! Preserve the old frame pointer
+	SAVE_REGS "D1.5, D0.5"
+
+	! Make room for new args. cifs->bytes is the total space for input
+	! and return arguments
+
+	add	A0StP, A0StP, D1Ar3
+
+	! Preserve cifs->bytes & fn
+	mov	D0.5, D1Ar3
+	mov	D1.5, D1Ar1
+
+	! Place all of the ffi_prep_args in position
+	mov	D1Ar1, A0StP
+
+	! Call ffi_prep_args(stack, &ecif)
+#ifdef __PIC__
+	callr  D1RtP, CNAME(ffi_prep_args@PLT)
+#else
+	callr  D1RtP, CNAME(ffi_prep_args)
+#endif
+
+	! Restore fn pointer
+
+	! The foreign stack should look like this
+	! XXXXX XXXXXX <--- stack pointer
+	! FnArgN rvalue
+	! FnArgN+2 FnArgN+1
+	! FnArgN+4 FnArgN+3
+	! ....
+	!
+
+	! A0StP now points to the first (or return) argument + 4
+
+	! Preserve cif->bytes
+	getl	D0Ar2, D1Ar1, [--A0StP]
+	getl	D0Ar4, D1Ar3, [--A0StP]
+	getl	D0Ar6, D1Ar5, [--A0StP]
+
+	! Place A0StP to the first argument again
+	add	A0StP, A0StP, #24 ! That's because we loaded 6 regs x 4 byte each
+
+	! A0FrP points to the initial stack without the reserved space for the
+	! cifs->bytes, whilst A0StP points to the stack after the space allocation
+
+	! fn was the first argument of ffi_call_SYSV.
+	! The stack at this point looks like this:
+	!
+	! A0StP(on entry to _SYSV) ->	Arg6	Arg5     | low
+	!				Arg4	Arg3     |
+	! 				Arg2	Arg1     |
+	! A0FrP ---->			D0FrtP	D1RtP    |
+	!				D1.5	D0.5	 |
+	! A0StP(bf prep_args) ->	FnArgn	FnArgn-1 |
+	!				FnArgn-2FnArgn-3 |
+	!				................ | <= cifs->bytes
+	!				FnArg4  FnArg3	 |
+	! A0StP (prv_A0StP+cifs->bytes) FnArg2  FnArg1   | high
+	!
+	! fn was in Arg1 so it's located in in A0FrP+#-0xC
+	!
+
+	! D0Re0 contains the size of arguments stored in registers
+	sub	A0StP, A0StP, D0Re0
+
+	! Arg1 is the function pointer for the foreign call. This has been
+	! preserved in D1.5
+
+	! Time to call (fn). Arguments should be like this:
+	! Arg1-Arg6 are loaded to regs
+	! The rest of the arguments are stored in stack pointed by A0StP
+
+	call_reg D1.5
+
+	! Reset stack.
+
+	mov	A0StP, A0FrP
+
+	! Load Arg1 with the pointer to storage for the return type
+	! This was stored in Arg5
+
+	getd	D1Ar1, [A0FrP+#-20]
+
+	! Load D0Ar2 with the return type code. This was stored in Arg4 (flags)
+
+	getd	D0Ar2, [A0FrP+#-16]
+
+	! We are ready to start processing the return value
+	! D0Re0 (and D1Re0) hold the return value
+
+	! If the return value is NULL, assume no return value
+	cmp	D1Ar1, #0
+	beq	LSYM(Lepilogue)
+
+	! return INT
+	cmp		D0Ar2, #FFI_TYPE_INT
+	! Sadly, there is no setd{cc} instruction so we need to workaround that
+	bne	.INT64
+	setd	[D1Ar1], D0Re0
+	b	LSYM(Lepilogue)
+
+	! return INT64
+.INT64:
+	cmp	D0Ar2, #FFI_TYPE_SINT64
+	setleq	[D1Ar1], D0Re0, D1Re0
+
+	! return DOUBLE
+	cmp	D0Ar2, #FFI_TYPE_DOUBLE
+	setl	[D1AR1++], D0Re0, D1Re0
+
+LSYM(Lepilogue):
+	! At this point, the stack pointer points right after the argument
+	! saved area. We need to restore 4 regs, therefore we need to move
+	! 16 bytes ahead.
+	add     A0StP, A0StP, #16
+	RET_REGS "D1.5, D0.5"
+	RET_ARGS
+	getd	D0Re0, [A0StP]
+	mov     A0FrP, D0FrT
+	swap	D1RtP, PC
+
+.ffi_call_SYSV_end:
+       .size   CNAME(ffi_call_SYSV),.ffi_call_SYSV_end-CNAME(ffi_call_SYSV)
+
+
+/*
+	(called by ffi_metag_trampoline)
+	void ffi_closure_SYSV (ffi_closure*)
+
+	(called by ffi_closure_SYSV)
+	unsigned int FFI_HIDDEN
+	ffi_closure_SYSV_inner (closure,respp, args)
+		ffi_closure *closure;
+		void **respp;
+		void *args;
+*/
+
+METAG_FUNC_START ffi_closure_SYSV
+	! We assume that D1Ar1 holds the address of the
+	! ffi_closure struct. We will use that to fetch the
+	! arguments. The stack pointer points to an empty space
+	! and it is ready to store more data.
+
+	! D1Ar1 is ready
+	! Allocate stack space for return value
+	add A0StP, A0StP, #8
+	! Store it to D0Ar2
+	sub D0Ar2, A0StP, #8
+
+	sub D1Ar3, A0FrP, #4
+
+	! D1Ar3 contains the address of the original D1Ar1 argument
+	! We need to subtract #4 later on
+
+	! Preverve D0Ar2
+	mov D0.5, D0Ar2
+
+#ifdef __PIC__
+	callr D1RtP, CNAME(ffi_closure_SYSV_inner@PLT)
+#else
+	callr D1RtP, CNAME(ffi_closure_SYSV_inner)
+#endif
+
+	! Check the return value and store it to D0.5
+	cmp D0Re0, #FFI_TYPE_INT
+	beq .Lretint
+	cmp D0Re0, #FFI_TYPE_DOUBLE
+	beq .Lretdouble
+.Lclosure_epilogue:
+	sub A0StP, A0StP, #8
+	RET_REGS "D1.5, D0.5"
+	RET_ARGS
+	swap	D1RtP, PC
+
+.Lretint:
+	setd [D0.5], D0Re0
+	b .Lclosure_epilogue
+.Lretdouble:
+	setl [D0.5++], D0Re0, D1Re0
+	b .Lclosure_epilogue
+.ffi_closure_SYSV_end:
+.size CNAME(ffi_closure_SYSV),.ffi_closure_SYSV_end-CNAME(ffi_closure_SYSV)
+
+
+ENTRY(ffi_metag_trampoline)
+	SAVE_ARGS
+	! New frame
+	mov A0FrP, A0StP
+	SAVE_REGS "D1.5, D0.5"
+	mov D0.5, PC
+	! Load D1Ar1 the value of ffi_metag_trampoline
+	getd D1Ar1, [D0.5 + #8]
+	! Jump to ffi_closure_SYSV
+	getd PC, [D0.5 + #12]
diff --git a/Modules/_ctypes/libffi/src/microblaze/ffi.c b/Modules/_ctypes/libffi/src/microblaze/ffi.c
new file mode 100644
index 0000000..5c155c5
--- /dev/null
+++ b/Modules/_ctypes/libffi/src/microblaze/ffi.c
@@ -0,0 +1,321 @@
+/* -----------------------------------------------------------------------
+   ffi.c - Copyright (c) 2012, 2013 Xilinx, Inc
+
+   MicroBlaze Foreign Function Interface
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   ``Software''), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+   NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+   HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+   WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+   OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+   DEALINGS IN THE SOFTWARE.
+   ----------------------------------------------------------------------- */
+
+#include <ffi.h>
+#include <ffi_common.h>
+
+extern void ffi_call_SYSV(void (*)(void*, extended_cif*), extended_cif*,
+		unsigned int, unsigned int, unsigned int*, void (*fn)(void),
+		unsigned int, unsigned int);
+
+extern void ffi_closure_SYSV(void);
+
+#define WORD_SIZE			sizeof(unsigned int)
+#define ARGS_REGISTER_SIZE	(WORD_SIZE * 6)
+#define WORD_ALIGN(x)		ALIGN(x, WORD_SIZE)
+
+/* ffi_prep_args is called by the assembly routine once stack space
+   has been allocated for the function's arguments */
+void ffi_prep_args(void* stack, extended_cif* ecif)
+{
+	unsigned int i;
+	ffi_type** p_arg;
+	void** p_argv;
+	void* stack_args_p = stack;
+
+	p_argv = ecif->avalue;
+
+	if (ecif == NULL || ecif->cif == NULL) {
+		return; /* no description to prepare */
+	}
+
+	if ((ecif->cif->rtype != NULL) &&
+			(ecif->cif->rtype->type == FFI_TYPE_STRUCT))
+	{
+		/* if return type is a struct which is referenced on the stack/reg5,
+		 * by a pointer. Stored the return value pointer in r5.
+		 */
+		char* addr = stack_args_p;
+		memcpy(addr, &(ecif->rvalue), WORD_SIZE);
+		stack_args_p += WORD_SIZE;
+	}
+
+	if (ecif->avalue == NULL) {
+		return; /* no arguments to prepare */
+	}
+
+	for (i = 0, p_arg = ecif->cif->arg_types; i < ecif->cif->nargs;
+			i++, p_arg++)
+	{
+		size_t size = (*p_arg)->size;
+		int type = (*p_arg)->type;
+		void* value = p_argv[i];
+		char* addr = stack_args_p;
+		int aligned_size = WORD_ALIGN(size);
+
+		/* force word alignment on the stack */
+		stack_args_p += aligned_size;
+		
+		switch (type)
+		{
+			case FFI_TYPE_UINT8:
+				*(unsigned int *)addr = (unsigned int)*(UINT8*)(value);
+				break;
+			case FFI_TYPE_SINT8:
+				*(signed int *)addr = (signed int)*(SINT8*)(value);
+				break;
+			case FFI_TYPE_UINT16:
+				*(unsigned int *)addr = (unsigned int)*(UINT16*)(value);
+				break;
+			case FFI_TYPE_SINT16:
+				*(signed int *)addr = (signed int)*(SINT16*)(value);
+				break;
+			case FFI_TYPE_STRUCT:
+#if __BIG_ENDIAN__
+				/*
+				 * MicroBlaze toolchain appears to emit:
+				 * bsrli r5, r5, 8 (caller)
+				 * ...
+				 * <branch to callee>
+				 * ...
+				 * bslli r5, r5, 8 (callee)
+				 * 
+				 * For structs like "struct a { uint8_t a[3]; };", when passed
+				 * by value.
+				 *
+				 * Structs like "struct b { uint16_t a; };" are also expected
+				 * to be packed strangely in registers.
+				 *
+				 * This appears to be because the microblaze toolchain expects
+				 * "struct b == uint16_t", which is only any issue for big
+				 * endian.
+				 *
+				 * The following is a work around for big-endian only, for the
+				 * above mentioned case, it will re-align the contents of a
+				 * <= 3-byte struct value.
+				 */
+				if (size < WORD_SIZE)
+				{
+				  memcpy (addr + (WORD_SIZE - size), value, size);
+				  break;
+				}
+#endif
+			case FFI_TYPE_SINT32:
+			case FFI_TYPE_UINT32:
+			case FFI_TYPE_FLOAT:
+			case FFI_TYPE_SINT64:
+			case FFI_TYPE_UINT64:
+			case FFI_TYPE_DOUBLE:
+			default:
+				memcpy(addr, value, aligned_size);
+		}
+	}
+}
+
+ffi_status ffi_prep_cif_machdep(ffi_cif* cif)
+{
+	/* check ABI */
+	switch (cif->abi)
+	{
+		case FFI_SYSV:
+			break;
+		default:
+			return FFI_BAD_ABI;
+	}
+	return FFI_OK;
+}
+
+void ffi_call(ffi_cif* cif, void (*fn)(void), void* rvalue, void** avalue)
+{
+	extended_cif ecif;
+	ecif.cif = cif;
+	ecif.avalue = avalue;
+
+	/* If the return value is a struct and we don't have a return */
+	/* value address then we need to make one */
+	if ((rvalue == NULL) && (cif->rtype->type == FFI_TYPE_STRUCT)) {
+		ecif.rvalue = alloca(cif->rtype->size);
+	} else {
+		ecif.rvalue = rvalue;
+	}
+
+	switch (cif->abi)
+	{
+	case FFI_SYSV:
+		ffi_call_SYSV(ffi_prep_args, &ecif, cif->bytes, cif->flags,
+				ecif.rvalue, fn, cif->rtype->type, cif->rtype->size);
+		break;
+	default:
+		FFI_ASSERT(0);
+		break;
+	}
+}
+
+void ffi_closure_call_SYSV(void* register_args, void* stack_args,
+			ffi_closure* closure, void* rvalue,
+			unsigned int* rtype, unsigned int* rsize)
+{
+	/* prepare arguments for closure call */
+	ffi_cif* cif = closure->cif;
+	ffi_type** arg_types = cif->arg_types;
+
+	/* re-allocate data for the args. This needs to be done in order to keep
+	 * multi-word objects (e.g. structs) in contigious memory. Callers are not
+	 * required to store the value of args in the lower 6 words in the stack
+	 * (although they are allocated in the stack).
+	 */
+	char* stackclone = alloca(cif->bytes);
+	void** avalue = alloca(cif->nargs * sizeof(void*));
+	void* struct_rvalue = NULL;
+	char* ptr = stackclone;
+	int i;
+
+	/* copy registers into stack clone */
+	int registers_used = cif->bytes;
+	if (registers_used > ARGS_REGISTER_SIZE) {
+		registers_used = ARGS_REGISTER_SIZE;
+	}
+	memcpy(stackclone, register_args, registers_used);
+
+	/* copy stack allocated args into stack clone */
+	if (cif->bytes > ARGS_REGISTER_SIZE) {
+		int stack_used = cif->bytes - ARGS_REGISTER_SIZE;
+		memcpy(stackclone + ARGS_REGISTER_SIZE, stack_args, stack_used);
+	}
+
+	/* preserve struct type return pointer passing */
+	if ((cif->rtype != NULL) && (cif->rtype->type == FFI_TYPE_STRUCT)) {
+		struct_rvalue = *((void**)ptr);
+		ptr += WORD_SIZE;
+	}
+
+	/* populate arg pointer list */
+	for (i = 0; i < cif->nargs; i++)
+	{
+		switch (arg_types[i]->type)
+		{
+			case FFI_TYPE_SINT8:
+			case FFI_TYPE_UINT8:
+#ifdef __BIG_ENDIAN__
+				avalue[i] = ptr + 3;
+#else
+				avalue[i] = ptr;
+#endif
+				break;
+			case FFI_TYPE_SINT16:
+			case FFI_TYPE_UINT16:
+#ifdef __BIG_ENDIAN__
+				avalue[i] = ptr + 2;
+#else
+				avalue[i] = ptr;
+#endif
+				break;
+			case FFI_TYPE_STRUCT:
+#if __BIG_ENDIAN__
+				/*
+				 * Work around strange ABI behaviour.
+				 * (see info in ffi_prep_args)
+				 */
+				if (arg_types[i]->size < WORD_SIZE)
+				{
+				  memcpy (ptr, ptr + (WORD_SIZE - arg_types[i]->size), arg_types[i]->size);
+				}
+#endif
+				avalue[i] = (void*)ptr;
+				break;
+			case FFI_TYPE_UINT64:
+			case FFI_TYPE_SINT64:
+			case FFI_TYPE_DOUBLE:
+				avalue[i] = ptr;
+				break;
+			case FFI_TYPE_SINT32:
+			case FFI_TYPE_UINT32:
+			case FFI_TYPE_FLOAT:
+			default:
+				/* default 4-byte argument */
+				avalue[i] = ptr;
+				break;
+		}
+		ptr += WORD_ALIGN(arg_types[i]->size);
+	}
+
+	/* set the return type info passed back to the wrapper */
+	*rsize = cif->rtype->size;
+	*rtype = cif->rtype->type;
+	if (struct_rvalue != NULL) {
+		closure->fun(cif, struct_rvalue, avalue, closure->user_data);
+		/* copy struct return pointer value into function return value */
+		*((void**)rvalue) = struct_rvalue;
+	} else {
+		closure->fun(cif, rvalue, avalue, closure->user_data);
+	}
+}
+
+ffi_status ffi_prep_closure_loc(
+		ffi_closure* closure, ffi_cif* cif,
+		void (*fun)(ffi_cif*, void*, void**, void*),
+		void* user_data, void* codeloc)
+{
+	unsigned long* tramp = (unsigned long*)&(closure->tramp[0]);
+	unsigned long cls = (unsigned long)codeloc;
+	unsigned long fn = 0;
+	unsigned long fn_closure_call_sysv = (unsigned long)ffi_closure_call_SYSV;
+
+	closure->cif = cif;
+	closure->fun = fun;
+	closure->user_data = user_data;
+
+	switch (cif->abi)
+	{
+	case FFI_SYSV:
+		fn = (unsigned long)ffi_closure_SYSV;
+
+		/* load r11 (temp) with fn */
+		/* imm fn(upper) */
+		tramp[0] = 0xb0000000 | ((fn >> 16) & 0xffff);
+		/* addik r11, r0, fn(lower) */
+		tramp[1] = 0x31600000 | (fn & 0xffff);
+
+		/* load r12 (temp) with cls */
+		/* imm cls(upper) */
+		tramp[2] = 0xb0000000 | ((cls >> 16) & 0xffff);
+		/* addik r12, r0, cls(lower) */
+		tramp[3] = 0x31800000 | (cls & 0xffff);
+
+		/* load r3 (temp) with ffi_closure_call_SYSV */
+		/* imm fn_closure_call_sysv(upper) */
+		tramp[4] = 0xb0000000 | ((fn_closure_call_sysv >> 16) & 0xffff);
+		/* addik r3, r0, fn_closure_call_sysv(lower) */
+		tramp[5] = 0x30600000 | (fn_closure_call_sysv & 0xffff);
+		/* branch/jump to address stored in r11 (fn) */
+		tramp[6] = 0x98085800; /* bra r11 */
+
+		break;
+	default:
+		return FFI_BAD_ABI;
+	}
+	return FFI_OK;
+}
diff --git a/Modules/_ctypes/libffi/src/microblaze/ffitarget.h b/Modules/_ctypes/libffi/src/microblaze/ffitarget.h
new file mode 100644
index 0000000..c6fa5a4
--- /dev/null
+++ b/Modules/_ctypes/libffi/src/microblaze/ffitarget.h
@@ -0,0 +1,53 @@
+/* -----------------------------------------------------------------------
+   ffitarget.h - Copyright (c) 2012, 2013 Xilinx, Inc
+
+   Target configuration macros for MicroBlaze.
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   ``Software''), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+   NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+   HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+   WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+   OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+   DEALINGS IN THE SOFTWARE.
+   ----------------------------------------------------------------------- */
+
+#ifndef LIBFFI_TARGET_H
+#define LIBFFI_TARGET_H
+
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
+#ifndef LIBFFI_ASM
+typedef unsigned long			ffi_arg;
+typedef signed long			ffi_sarg;
+
+typedef enum ffi_abi {
+	FFI_FIRST_ABI = 0,
+	FFI_SYSV,
+	FFI_LAST_ABI,
+	FFI_DEFAULT_ABI = FFI_SYSV
+} ffi_abi;
+#endif
+
+/* Definitions for closures */
+
+#define FFI_CLOSURES 1
+#define FFI_NATIVE_RAW_API 0
+
+#define FFI_TRAMPOLINE_SIZE (4*8)
+
+#endif
diff --git a/Modules/_ctypes/libffi/src/microblaze/sysv.S b/Modules/_ctypes/libffi/src/microblaze/sysv.S
new file mode 100644
index 0000000..7a195a6
--- /dev/null
+++ b/Modules/_ctypes/libffi/src/microblaze/sysv.S
@@ -0,0 +1,302 @@
+/* -----------------------------------------------------------------------
+   sysv.S - Copyright (c) 2012, 2013 Xilinx, Inc
+
+   MicroBlaze Foreign Function Interface
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   ``Software''), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+   NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+   HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+   WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+   OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+   DEALINGS IN THE SOFTWARE.
+   ----------------------------------------------------------------------- */
+
+#define LIBFFI_ASM
+#include <fficonfig.h>
+#include <ffi.h>
+
+	/*
+	 * arg[0] (r5)  = ffi_prep_args,
+	 * arg[1] (r6)  = &ecif,
+	 * arg[2] (r7)  = cif->bytes,
+	 * arg[3] (r8)  = cif->flags,
+	 * arg[4] (r9)  = ecif.rvalue,
+	 * arg[5] (r10) = fn
+	 * arg[6] (sp[0]) = cif->rtype->type
+	 * arg[7] (sp[4]) = cif->rtype->size
+	 */
+	.text
+	.globl ffi_call_SYSV
+	.type ffi_call_SYSV, @function
+ffi_call_SYSV:
+	/* push callee saves */
+	addik r1, r1, -20
+	swi r19, r1, 0 /* Frame Pointer */
+	swi r20, r1, 4 /* PIC register */
+	swi r21, r1, 8 /* PIC register */
+	swi r22, r1, 12 /* save for locals */
+	swi r23, r1, 16 /* save for locals */
+	
+	/* save the r5-r10 registers in the stack */
+	addik r1, r1, -24 /* increment sp to store 6x 32-bit words */
+	swi r5, r1, 0
+	swi r6, r1, 4
+	swi r7, r1, 8
+	swi r8, r1, 12
+	swi r9, r1, 16
+	swi r10, r1, 20
+
+	/* save function pointer */
+	addik r3, r5, 0 /* copy ffi_prep_args into r3 */
+	addik r22, r1, 0 /* save sp for unallocated args into r22 (callee-saved) */
+	addik r23, r10, 0 /* save function address into r23 (callee-saved) */
+
+	/* prepare stack with allocation for n (bytes = r7) args */
+	rsub r1, r7, r1 /* subtract bytes from sp */
+
+	/* prep args for ffi_prep_args call */
+	addik r5, r1, 0 /* store stack pointer into arg[0] */
+	/* r6 still holds ecif for arg[1] */
+
+	/* Call ffi_prep_args(stack, &ecif). */
+	addik r1, r1, -4
+	swi r15, r1, 0 /* store the link register in the frame */
+	brald r15, r3
+	nop /* branch has delay slot */
+	lwi r15, r1, 0
+	addik r1, r1, 4 /* restore the link register from the frame */
+	/* returns calling stack pointer location */
+
+	/* prepare args for fn call, prep_args populates them onto the stack */
+	lwi r5, r1, 0 /* arg[0] */
+	lwi r6, r1, 4 /* arg[1] */
+	lwi r7, r1, 8 /* arg[2] */
+	lwi r8, r1, 12 /* arg[3] */
+	lwi r9, r1, 16 /* arg[4] */
+	lwi r10, r1, 20 /* arg[5] */
+
+	/* call (fn) (...). */
+	addik r1, r1, -4
+	swi r15, r1, 0 /* store the link register in the frame */
+	brald r15, r23
+	nop /* branch has delay slot */
+	lwi r15, r1, 0
+	addik r1, r1, 4 /* restore the link register from the frame */
+
+	/* Remove the space we pushed for the args. */
+	addik r1, r22, 0 /* restore old SP */
+
+	/* restore this functions parameters */
+	lwi r5, r1, 0 /* arg[0] */
+	lwi r6, r1, 4 /* arg[1] */
+	lwi r7, r1, 8 /* arg[2] */
+	lwi r8, r1, 12 /* arg[3] */
+	lwi r9, r1, 16 /* arg[4] */
+	lwi r10, r1, 20 /* arg[5] */
+	addik r1, r1, 24 /* decrement sp to de-allocate 6x 32-bit words */
+
+	/* If the return value pointer is NULL, assume no return value. */
+	beqi r9, ffi_call_SYSV_end
+
+	lwi r22, r1, 48 /* get return type (20 for locals + 28 for arg[6]) */
+	lwi r23, r1, 52 /* get return size (20 for locals + 32 for arg[7])  */
+	
+	/* Check if return type is actually a struct, do nothing */
+	rsubi r11, r22, FFI_TYPE_STRUCT
+	beqi r11, ffi_call_SYSV_end
+
+	/* Return 8bit */
+	rsubi r11, r23, 1
+	beqi r11, ffi_call_SYSV_store8
+
+	/* Return 16bit */
+	rsubi r11, r23, 2
+	beqi r11, ffi_call_SYSV_store16
+
+	/* Return 32bit */
+	rsubi r11, r23, 4
+	beqi r11, ffi_call_SYSV_store32
+
+	/* Return 64bit */
+	rsubi r11, r23, 8
+	beqi r11, ffi_call_SYSV_store64
+
+	/* Didnt match anything */
+	bri ffi_call_SYSV_end
+
+ffi_call_SYSV_store64:
+	swi r3, r9, 0 /* store word r3 into return value */
+	swi r4, r9, 4 /* store word r4 into return value */
+	bri ffi_call_SYSV_end
+
+ffi_call_SYSV_store32:
+	swi r3, r9, 0 /* store word r3 into return value */
+	bri ffi_call_SYSV_end
+
+ffi_call_SYSV_store16:
+#ifdef __BIG_ENDIAN__
+	shi r3, r9, 2 /* store half-word r3 into return value */
+#else
+	shi r3, r9, 0 /* store half-word r3 into return value */
+#endif
+	bri ffi_call_SYSV_end
+
+ffi_call_SYSV_store8:
+#ifdef __BIG_ENDIAN__
+	sbi r3, r9, 3 /* store byte r3 into return value */
+#else
+	sbi r3, r9, 0 /* store byte r3 into return value */
+#endif
+	bri ffi_call_SYSV_end
+
+ffi_call_SYSV_end:
+	/* callee restores */
+	lwi r19, r1, 0 /* frame pointer */
+	lwi r20, r1, 4 /* PIC register */
+	lwi r21, r1, 8 /* PIC register */
+	lwi r22, r1, 12
+	lwi r23, r1, 16
+	addik r1, r1, 20
+
+	/* return from sub-routine (with delay slot) */
+	rtsd r15, 8
+	nop
+
+	.size ffi_call_SYSV, . - ffi_call_SYSV
+
+/* ------------------------------------------------------------------------- */
+
+	/*
+	 * args passed into this function, are passed down to the callee.
+	 * this function is the target of the closure trampoline, as such r12 is 
+	 * a pointer to the closure object.
+	 */
+	.text
+	.globl ffi_closure_SYSV
+	.type ffi_closure_SYSV, @function
+ffi_closure_SYSV:
+	/* push callee saves */
+	addik r11, r1, 28 /* save stack args start location (excluding regs/link) */
+	addik r1, r1, -12
+	swi r19, r1, 0 /* Frame Pointer */
+	swi r20, r1, 4 /* PIC register */
+	swi r21, r1, 8 /* PIC register */
+
+	/* store register args on stack */
+	addik r1, r1, -24
+	swi r5, r1, 0
+	swi r6, r1, 4
+	swi r7, r1, 8
+	swi r8, r1, 12
+	swi r9, r1, 16
+	swi r10, r1, 20
+
+	/* setup args */
+	addik r5, r1, 0 /* register_args */
+	addik r6, r11, 0 /* stack_args */
+	addik r7, r12, 0 /* closure object */
+	addik r1, r1, -8 /* allocate return value */
+	addik r8, r1, 0 /* void* rvalue */
+	addik r1, r1, -8 /* allocate for reutrn type/size values */
+	addik r9, r1, 0 /* void* rtype */
+	addik r10, r1, 4 /* void* rsize */
+
+	/* call the wrap_call function */
+	addik r1, r1, -28 /* allocate args + link reg */
+	swi r15, r1, 0 /* store the link register in the frame */
+	brald r15, r3
+	nop /* branch has delay slot */
+	lwi r15, r1, 0
+	addik r1, r1, 28 /* restore the link register from the frame */
+
+ffi_closure_SYSV_prepare_return:
+	lwi r9, r1, 0 /* rtype */
+	lwi r10, r1, 4 /* rsize */
+	addik r1, r1, 8 /* de-allocate return info values */
+
+	/* Check if return type is actually a struct, store 4 bytes */
+	rsubi r11, r9, FFI_TYPE_STRUCT
+	beqi r11, ffi_closure_SYSV_store32
+
+	/* Return 8bit */
+	rsubi r11, r10, 1
+	beqi r11, ffi_closure_SYSV_store8
+
+	/* Return 16bit */
+	rsubi r11, r10, 2
+	beqi r11, ffi_closure_SYSV_store16
+
+	/* Return 32bit */
+	rsubi r11, r10, 4
+	beqi r11, ffi_closure_SYSV_store32
+
+	/* Return 64bit */
+	rsubi r11, r10, 8
+	beqi r11, ffi_closure_SYSV_store64
+
+	/* Didnt match anything */
+	bri ffi_closure_SYSV_end
+
+ffi_closure_SYSV_store64:
+	lwi r3, r1, 0 /* store word r3 into return value */
+	lwi r4, r1, 4 /* store word r4 into return value */
+	/* 64 bits == 2 words, no sign extend occurs */
+	bri ffi_closure_SYSV_end
+
+ffi_closure_SYSV_store32:
+	lwi r3, r1, 0 /* store word r3 into return value */
+	/* 32 bits == 1 word, no sign extend occurs */
+	bri ffi_closure_SYSV_end
+
+ffi_closure_SYSV_store16:
+#ifdef __BIG_ENDIAN__
+	lhui r3, r1, 2 /* store half-word r3 into return value */
+#else
+	lhui r3, r1, 0 /* store half-word r3 into return value */
+#endif
+	rsubi r11, r9, FFI_TYPE_SINT16
+	bnei r11, ffi_closure_SYSV_end
+	sext16 r3, r3 /* fix sign extend of sint8 */
+	bri ffi_closure_SYSV_end
+
+ffi_closure_SYSV_store8:
+#ifdef __BIG_ENDIAN__
+	lbui r3, r1, 3 /* store byte r3 into return value */
+#else
+	lbui r3, r1, 0 /* store byte r3 into return value */
+#endif
+	rsubi r11, r9, FFI_TYPE_SINT8
+	bnei r11, ffi_closure_SYSV_end
+	sext8 r3, r3 /* fix sign extend of sint8 */
+	bri ffi_closure_SYSV_end
+
+ffi_closure_SYSV_end:
+	addik r1, r1, 8 /* de-allocate return value */
+
+	/* de-allocate stored args */
+	addik r1, r1, 24
+
+	/* callee restores */
+	lwi r19, r1, 0 /* frame pointer */
+	lwi r20, r1, 4 /* PIC register */
+	lwi r21, r1, 8 /* PIC register */
+	addik r1, r1, 12
+
+	/* return from sub-routine (with delay slot) */
+	rtsd r15, 8
+	nop
+
+	.size ffi_closure_SYSV, . - ffi_closure_SYSV
diff --git a/Modules/_ctypes/libffi/src/mips/ffi.c b/Modules/_ctypes/libffi/src/mips/ffi.c
index d714cc9..03121e3 100644
--- a/Modules/_ctypes/libffi/src/mips/ffi.c
+++ b/Modules/_ctypes/libffi/src/mips/ffi.c
@@ -1,6 +1,7 @@
 /* -----------------------------------------------------------------------
-   ffi.c - Copyright (c) 1996, 2007, 2008  Red Hat, Inc.
-           Copyright (c) 2008       David Daney
+   ffi.c - Copyright (c) 2011  Anthony Green
+           Copyright (c) 2008  David Daney
+           Copyright (c) 1996, 2007, 2008, 2011  Red Hat, Inc.
    
    MIPS Foreign Function Interface 
 
@@ -37,7 +38,11 @@
 #endif
 
 #ifndef USE__BUILTIN___CLEAR_CACHE
-#include <sys/cachectl.h>
+#  if defined(__OpenBSD__)
+#    include <mips64/sysarch.h>
+#  else
+#    include <sys/cachectl.h>
+#  endif
 #endif
 
 #ifdef FFI_DEBUG
@@ -662,10 +667,19 @@
   char *clear_location = (char *) codeloc;
 
 #if defined(FFI_MIPS_O32)
-  FFI_ASSERT(cif->abi == FFI_O32 || cif->abi == FFI_O32_SOFT_FLOAT);
+  if (cif->abi != FFI_O32 && cif->abi != FFI_O32_SOFT_FLOAT)
+    return FFI_BAD_ABI;
   fn = ffi_closure_O32;
-#else /* FFI_MIPS_N32 */
-  FFI_ASSERT(cif->abi == FFI_N32 || cif->abi == FFI_N64);
+#else
+#if _MIPS_SIM ==_ABIN32
+  if (cif->abi != FFI_N32
+      && cif->abi != FFI_N32_SOFT_FLOAT)
+    return FFI_BAD_ABI;
+#else
+  if (cif->abi != FFI_N64
+      && cif->abi != FFI_N64_SOFT_FLOAT)
+    return FFI_BAD_ABI;
+#endif
   fn = ffi_closure_N32;
 #endif /* FFI_MIPS_O32 */
 
diff --git a/Modules/_ctypes/libffi/src/mips/ffitarget.h b/Modules/_ctypes/libffi/src/mips/ffitarget.h
index c5f4e05..717d659 100644
--- a/Modules/_ctypes/libffi/src/mips/ffitarget.h
+++ b/Modules/_ctypes/libffi/src/mips/ffitarget.h
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003  Red Hat, Inc.
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 1996-2003  Red Hat, Inc.
    Target configuration macros for MIPS.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -27,11 +28,23 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 #ifdef linux
 # include <asm/sgidefs.h>
-#else
+#elif defined(__rtems__)
+/*
+ * Subprogram calling convention - copied from sgidefs.h
+ */
+#define _MIPS_SIM_ABI32		1
+#define _MIPS_SIM_NABI32	2
+#define _MIPS_SIM_ABI64		3
+#elif !defined(__OpenBSD__)
 # include <sgidefs.h>
 #endif
+
 #  ifndef _ABIN32
 #    define _ABIN32 _MIPS_SIM_NABI32
 #  endif
@@ -43,7 +56,7 @@
 #  endif
 
 #if !defined(_MIPS_SIM)
--- something is very wrong --
+# error -- something is very wrong --
 #else
 #  if (_MIPS_SIM==_ABIN32 && defined(_ABIN32)) || (_MIPS_SIM==_ABI64 && defined(_ABI64))
 #    define FFI_MIPS_N32
@@ -51,7 +64,7 @@
 #    if (_MIPS_SIM==_ABIO32 && defined(_ABIO32))
 #      define FFI_MIPS_O32
 #    else
--- this is an unsupported platform --
+#     error -- this is an unsupported platform --
 #    endif
 #  endif
 #endif
@@ -186,30 +199,29 @@
   FFI_O32_SOFT_FLOAT,
   FFI_N32_SOFT_FLOAT,
   FFI_N64_SOFT_FLOAT,
+  FFI_LAST_ABI,
 
 #ifdef FFI_MIPS_O32
 #ifdef __mips_soft_float
-  FFI_DEFAULT_ABI = FFI_O32_SOFT_FLOAT,
+  FFI_DEFAULT_ABI = FFI_O32_SOFT_FLOAT
 #else
-  FFI_DEFAULT_ABI = FFI_O32,
+  FFI_DEFAULT_ABI = FFI_O32
 #endif
 #else
 # if _MIPS_SIM==_ABI64
 #  ifdef __mips_soft_float
-  FFI_DEFAULT_ABI = FFI_N64_SOFT_FLOAT,
+  FFI_DEFAULT_ABI = FFI_N64_SOFT_FLOAT
 #  else
-  FFI_DEFAULT_ABI = FFI_N64,
+  FFI_DEFAULT_ABI = FFI_N64
 #  endif
 # else
 #  ifdef __mips_soft_float
-  FFI_DEFAULT_ABI = FFI_N32_SOFT_FLOAT,
+  FFI_DEFAULT_ABI = FFI_N32_SOFT_FLOAT
 #  else
-  FFI_DEFAULT_ABI = FFI_N32,
+  FFI_DEFAULT_ABI = FFI_N32
 #  endif
 # endif
 #endif
-
-  FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
 } ffi_abi;
 
 #define FFI_EXTRA_CIF_FIELDS unsigned rstruct_flag
diff --git a/Modules/_ctypes/libffi/src/mips/n32.S b/Modules/_ctypes/libffi/src/mips/n32.S
index ae23094..ff4bbce 100644
--- a/Modules/_ctypes/libffi/src/mips/n32.S
+++ b/Modules/_ctypes/libffi/src/mips/n32.S
@@ -43,6 +43,7 @@
 #ifdef __GNUC__
 	.abicalls
 #endif
+	.set mips4
 	.text
 	.align	2
 	.globl	ffi_call_N32
diff --git a/Modules/_ctypes/libffi/src/moxie/eabi.S b/Modules/_ctypes/libffi/src/moxie/eabi.S
index 379ea4b..ac7aceb 100644
--- a/Modules/_ctypes/libffi/src/moxie/eabi.S
+++ b/Modules/_ctypes/libffi/src/moxie/eabi.S
@@ -1,7 +1,7 @@
 /* -----------------------------------------------------------------------
-   eabi.S - Copyright (c) 2004  Anthony Green
+   eabi.S - Copyright (c) 2012, 2013  Anthony Green
    
-   FR-V Assembly glue.
+   Moxie Assembly glue.
 
    Permission is hereby granted, free of charge, to any person obtaining
    a copy of this software and associated documentation files (the
@@ -34,95 +34,68 @@
 	.globl ffi_call_EABI
 	.type ffi_call_EABI, @function
 
-	# gr8 :   ffi_prep_args
-	# gr9 :   &ecif
-	# gr10:   cif->bytes
-	# gr11:   fig->flags
-	# gr12:   ecif.rvalue
-	# gr13:   fn
+	# $r0 :   ffi_prep_args
+	# $r1 :   &ecif
+	# $r2 :   cif->bytes
+	# $r3 :   fig->flags
+	# $r4 :   ecif.rvalue
+	# $r5 :   fn
 	
-ffi_call_EABI:	
-	addi	sp, #-80, sp
-	sti	fp, @(sp, #24)
-	addi	sp, #24, fp
-	movsg	lr, gr5
+ffi_call_EABI:
+	push	$sp, $r6
+	push	$sp, $r7
+	push	$sp, $r8
+	dec	$sp, 24
 
-	/* Make room for the new arguments.  */
-	/* subi	sp, fp, gr10 */
-	
-	/* Store return address and incoming args on stack.  */
-	sti	gr5, @(fp, #8)
-	sti	gr8, @(fp, #-4)
-	sti	gr9, @(fp, #-8)
-	sti	gr10, @(fp, #-12)
-	sti	gr11, @(fp, #-16)
-	sti	gr12, @(fp, #-20)
-	sti	gr13, @(fp, #-24)
-
-	sub     sp, gr10, sp
+	/* Store incoming args on stack.  */
+	sto.l	0($sp), $r0 /* ffi_prep_args */
+	sto.l	4($sp), $r1 /* ecif */
+	sto.l	8($sp), $r2 /* bytes */
+	sto.l	12($sp), $r3 /* flags */
+	sto.l	16($sp), $r4 /* &rvalue */
+	sto.l	20($sp), $r5 /* fn */
 	
 	/* Call ffi_prep_args.  */
-	ldi	@(fp, #-4), gr4
-	addi	sp, #0, gr8
-	ldi	@(fp, #-8), gr9
-#ifdef __FRV_FDPIC__
-	ldd	@(gr4, gr0), gr14
-	calll	@(gr14, gr0)
-#else
-	calll	@(gr4, gr0)
-#endif	
+	mov 	$r6, $r4 /* Save result buffer */
+	mov	$r7, $r5 /* Save the target fn */
+	mov	$r8, $r3 /* Save the flags */
+	sub.l	$sp, $r2 /* Allocate stack space */
+	mov	$r0, $sp /* We can stomp over $r0 */
+	/* $r1 is already set up */
+	jsra 	ffi_prep_args
 
-	/* ffi_prep_args returns the new stack pointer.  */
-	mov	gr8, gr4
-		
-	ldi	@(sp, #0), gr8
-	ldi	@(sp, #4), gr9
-	ldi	@(sp, #8), gr10
-	ldi	@(sp, #12), gr11
-	ldi	@(sp, #16), gr12
-	ldi	@(sp, #20), gr13
-
-	/* Always copy the return value pointer into the hidden
-	   parameter register.  This is only strictly necessary
-	   when we're returning an aggregate type, but it doesn't
-	   hurt to do this all the time, and it saves a branch.  */
-	ldi	@(fp, #-20), gr3
-
-	/* Use the ffi_prep_args return value for the new sp.  */
-	mov	gr4, sp
+	/* Load register arguments.  */
+	ldo.l	$r0, 0($sp)
+	ldo.l	$r1, 4($sp)
+	ldo.l	$r2, 8($sp)
+	ldo.l	$r3, 12($sp)
+	ldo.l	$r4, 16($sp)
+	ldo.l	$r5, 20($sp)
 	
 	/* Call the target function.  */
-	ldi	@(fp, -24), gr4
-#ifdef __FRV_FDPIC__
-	ldd	@(gr4, gr0), gr14
-	calll	@(gr14, gr0)
-#else
-	calll	@(gr4, gr0)
-#endif	
+	jsr	$r7
 
-	/* Store the result. */
-	ldi	@(fp, #-16), gr10  /* fig->flags */
-	ldi	@(fp, #-20), gr4   /* ecif.rvalue */
+	ldi.l	$r7, 0xffffffff
+	cmp	$r8, $r7
+	beq	retstruct
 
-	/* Is the return value stored in two registers?  */
-	cmpi	gr10, #8, icc0
-	bne	icc0, 0, .L2
-	/*   Yes, save them.  */
-	sti	gr8, @(gr4, #0)
-	sti	gr9, @(gr4, #4)
-	bra	.L3
-.L2:
-	/* Is the return value a structure?  */
-	cmpi	gr10, #-1, icc0
-	beq	icc0, 0, .L3
-	/*   No, save a 4 byte return value.  */
-	sti	gr8, @(gr4, #0)
-.L3:	
+	ldi.l	$r7, 4
+	cmp	$r8, $r7
+	bgt	ret2reg
 
-	/* Restore the stack, and return.  */
-	ldi	@(fp, 8), gr5
-	ld	@(fp, gr0), fp
-	addi	sp,#80,sp
-	jmpl	@(gr5,gr0)
+	st.l	($r6), $r0
+	jmpa	retdone
+
+ret2reg:	
+	st.l	($r6), $r0
+	sto.l	4($r6), $r1
+
+retstruct:
+retdone:	
+	/* Return.  */
+	ldo.l	$r6, -4($fp)
+	ldo.l	$r7, -8($fp)
+	ldo.l	$r8, -12($fp)
+	ret
 	.size ffi_call_EABI, .-ffi_call_EABI
 	
diff --git a/Modules/_ctypes/libffi/src/moxie/ffi.c b/Modules/_ctypes/libffi/src/moxie/ffi.c
index 54cbbb9..540a042 100644
--- a/Modules/_ctypes/libffi/src/moxie/ffi.c
+++ b/Modules/_ctypes/libffi/src/moxie/ffi.c
@@ -1,5 +1,5 @@
 /* -----------------------------------------------------------------------
-   ffi.c - Copyright (C) 2009  Anthony Green
+   ffi.c - Copyright (C) 2012, 2013  Anthony Green
    
    Moxie Foreign Function Interface 
 
@@ -43,6 +43,12 @@
   p_argv = ecif->avalue;
   argp = stack;
 
+  if (ecif->cif->rtype->type == FFI_TYPE_STRUCT)
+    {
+      *(void **) argp = ecif->rvalue;
+      argp += 4;
+    }
+
   for (i = ecif->cif->nargs, p_arg = ecif->cif->arg_types;
        (i != 0);
        i--, p_arg++)
@@ -56,17 +62,6 @@
 	  z = sizeof(void*);
 	  *(void **) argp = *p_argv;
 	} 
-      /*      if ((*p_arg)->type == FFI_TYPE_FLOAT)
-	{
-	  if (count > 24)
-	    {
-	      // This is going on the stack.  Turn it into a double.  
-	      *(double *) argp = (double) *(float*)(* p_argv);
-	      z = sizeof(double);
-	    }
-	  else
-	    *(void **) argp = *(void **)(* p_argv);
-	}  */
       else if (z < sizeof(int))
 	{
 	  z = sizeof(int);
@@ -147,8 +142,7 @@
     }
   else
     ecif.rvalue = rvalue;
-    
-  
+
   switch (cif->abi) 
     {
     case FFI_EABI:
@@ -165,19 +159,25 @@
 		       unsigned arg4, unsigned arg5, unsigned arg6)
 {
   /* This function is called by a trampoline.  The trampoline stows a
-     pointer to the ffi_closure object in gr7.  We must save this
+     pointer to the ffi_closure object in $r7.  We must save this
      pointer in a place that will persist while we do our work.  */
-  register ffi_closure *creg __asm__ ("gr7");
+  register ffi_closure *creg __asm__ ("$r12");
   ffi_closure *closure = creg;
 
   /* Arguments that don't fit in registers are found on the stack
      at a fixed offset above the current frame pointer.  */
-  register char *frame_pointer __asm__ ("fp");
-  char *stack_args = frame_pointer + 16;
+  register char *frame_pointer __asm__ ("$fp");
+
+  /* Pointer to a struct return value.  */
+  void *struct_rvalue = (void *) arg1;
+
+  /* 6 words reserved for register args + 3 words from jsr */
+  char *stack_args = frame_pointer + 9*4; 
 
   /* Lay the register arguments down in a continuous chunk of memory.  */
   unsigned register_args[6] =
     { arg1, arg2, arg3, arg4, arg5, arg6 };
+  char *register_args_ptr = (char *) register_args;
 
   ffi_cif *cif = closure->cif;
   ffi_type **arg_types = cif->arg_types;
@@ -185,6 +185,12 @@
   char *ptr = (char *) register_args;
   int i;
 
+  /* preserve struct type return pointer passing */
+  if ((cif->rtype != NULL) && (cif->rtype->type == FFI_TYPE_STRUCT)) {
+    ptr += 4;
+    register_args_ptr = (char *)&register_args[1];
+  }
+
   /* Find the address of each argument.  */
   for (i = 0; i < cif->nargs; i++)
     {
@@ -201,6 +207,7 @@
 	case FFI_TYPE_SINT32:
 	case FFI_TYPE_UINT32:
 	case FFI_TYPE_FLOAT:
+	case FFI_TYPE_POINTER:
 	  avalue[i] = ptr;
 	  break;
 	case FFI_TYPE_STRUCT:
@@ -216,30 +223,21 @@
 
       /* If we've handled more arguments than fit in registers,
 	 start looking at the those passed on the stack.  */
-      if (ptr == ((char *)register_args + (6*4)))
+      if (ptr == &register_args[6])
 	ptr = stack_args;
     }
 
   /* Invoke the closure.  */
-  if (cif->rtype->type == FFI_TYPE_STRUCT)
+  if (cif->rtype && (cif->rtype->type == FFI_TYPE_STRUCT))
     {
-      /* The caller allocates space for the return structure, and
-       passes a pointer to this space in gr3.  Use this value directly
-       as the return value.  */
-      register void *return_struct_ptr __asm__("gr3");
-      (closure->fun) (cif, return_struct_ptr, avalue, closure->user_data);
+      (closure->fun) (cif, struct_rvalue, avalue, closure->user_data);
     }
   else
     {
       /* Allocate space for the return value and call the function.  */
       long long rvalue;
       (closure->fun) (cif, &rvalue, avalue, closure->user_data);
-
-      /* Functions return 4-byte or smaller results in gr8.  8-byte
-	 values also use gr9.  We fill the both, even for small return
-	 values, just to avoid a branch.  */ 
-      asm ("ldi  @(%0, #0), gr8" : : "r" (&rvalue));
-      asm ("ldi  @(%0, #0), gr9" : : "r" (&((int *) &rvalue)[1]));
+      asm ("mov $r12, %0\n ld.l $r0, ($r12)\n ldo.l $r1, 4($r12)" : : "r" (&rvalue));
     }
 }
 
@@ -250,27 +248,25 @@
 		      void *user_data,
 		      void *codeloc)
 {
-  unsigned int *tramp = (unsigned int *) &closure->tramp[0];
+  unsigned short *tramp = (unsigned short *) &closure->tramp[0];
   unsigned long fn = (long) ffi_closure_eabi;
   unsigned long cls = (long) codeloc;
-  int i;
+
+  if (cif->abi != FFI_EABI)
+    return FFI_BAD_ABI;
 
   fn = (unsigned long) ffi_closure_eabi;
 
-  tramp[0] = 0x8cfc0000 + (fn  & 0xffff); /* setlos lo(fn), gr6    */
-  tramp[1] = 0x8efc0000 + (cls & 0xffff); /* setlos lo(cls), gr7   */
-  tramp[2] = 0x8cf80000 + (fn  >> 16);	  /* sethi hi(fn), gr6     */
-  tramp[3] = 0x8ef80000 + (cls >> 16);    /* sethi hi(cls), gr7    */
-  tramp[4] = 0x80300006;                  /* jmpl @(gr0, gr6)      */
+  tramp[0] = 0x01e0; /* ldi.l $r7, .... */
+  tramp[1] = cls >> 16;
+  tramp[2] = cls & 0xffff;
+  tramp[3] = 0x1a00; /* jmpa .... */
+  tramp[4] = fn >> 16;
+  tramp[5] = fn & 0xffff;
 
   closure->cif = cif;
   closure->fun = fun;
   closure->user_data = user_data;
 
-  /* Cache flushing.  */
-  for (i = 0; i < FFI_TRAMPOLINE_SIZE; i++)
-    __asm__ volatile ("dcf @(%0,%1)\n\tici @(%2,%1)" :: "r" (tramp), "r" (i),
-		      "r" (codeloc));
-
   return FFI_OK;
 }
diff --git a/Modules/_ctypes/libffi/src/moxie/ffitarget.h b/Modules/_ctypes/libffi/src/moxie/ffitarget.h
index f5305d1..623e3ec 100644
--- a/Modules/_ctypes/libffi/src/moxie/ffitarget.h
+++ b/Modules/_ctypes/libffi/src/moxie/ffitarget.h
@@ -1,5 +1,5 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 2009 Anthony Green
+   ffitarget.h - Copyright (c) 2012, 2013  Anthony Green
    Target configuration macros for Moxie
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -35,22 +35,18 @@
 
 typedef enum ffi_abi {
   FFI_FIRST_ABI = 0,
-
-#ifdef MOXIE
   FFI_EABI,
   FFI_DEFAULT_ABI = FFI_EABI,
-#endif
-
   FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
 } ffi_abi;
 #endif
 
 /* ---- Definitions for closures ----------------------------------------- */
 
-#define FFI_CLOSURES 0
+#define FFI_CLOSURES 1
 #define FFI_NATIVE_RAW_API 0
 
-/* Trampolines are 5 4-byte instructions long.  */
-#define FFI_TRAMPOLINE_SIZE (5*4)
+/* Trampolines are 12-bytes long.  See ffi_prep_closure_loc.  */
+#define FFI_TRAMPOLINE_SIZE (12)
 
 #endif
diff --git a/Modules/_ctypes/libffi/src/pa/ffi.c b/Modules/_ctypes/libffi/src/pa/ffi.c
index 6d7606f..4ce2bc6 100644
--- a/Modules/_ctypes/libffi/src/pa/ffi.c
+++ b/Modules/_ctypes/libffi/src/pa/ffi.c
@@ -1,9 +1,11 @@
 /* -----------------------------------------------------------------------
-   ffi.c - (c) 2003-2004 Randolph Chung <tausq@debian.org>
+   ffi.c - (c) 2011 Anthony Green
            (c) 2008 Red Hat, Inc.
-
+	   (c) 2006 Free Software Foundation, Inc.
+           (c) 2003-2004 Randolph Chung <tausq@debian.org>
+           
    HPPA Foreign Function Interface
-   HP-UX PA ABI support (c) 2006 Free Software Foundation, Inc.
+   HP-UX PA ABI support 
 
    Permission is hereby granted, free of charge, to any person obtaining
    a copy of this software and associated documentation files (the
@@ -633,7 +635,8 @@
   UINT32 *tmp;
 #endif
 
-  FFI_ASSERT (cif->abi == FFI_PA32);
+  if (cif->abi != FFI_PA32)
+    return FFI_BAD_ABI;
 
   /* Make a small trampoline that will branch to our
      handler function. Use PC-relative addressing.  */
diff --git a/Modules/_ctypes/libffi/src/pa/ffitarget.h b/Modules/_ctypes/libffi/src/pa/ffitarget.h
index 001f891..5e364d3 100644
--- a/Modules/_ctypes/libffi/src/pa/ffitarget.h
+++ b/Modules/_ctypes/libffi/src/pa/ffitarget.h
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003  Red Hat, Inc.
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 1996-2003  Red Hat, Inc.
    Target configuration macros for hppa.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -27,6 +28,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 /* ---- System specific configurations ----------------------------------- */
 
 #ifndef LIBFFI_ASM
@@ -38,21 +43,22 @@
 
 #ifdef PA_LINUX
   FFI_PA32,
-  FFI_DEFAULT_ABI = FFI_PA32,
+  FFI_LAST_ABI,
+  FFI_DEFAULT_ABI = FFI_PA32
 #endif
 
 #ifdef PA_HPUX
   FFI_PA32,
-  FFI_DEFAULT_ABI = FFI_PA32,
+  FFI_LAST_ABI,
+  FFI_DEFAULT_ABI = FFI_PA32
 #endif
 
 #ifdef PA64_HPUX
 #error "PA64_HPUX FFI is not yet implemented"
   FFI_PA64,
-  FFI_DEFAULT_ABI = FFI_PA64,
+  FFI_LAST_ABI,
+  FFI_DEFAULT_ABI = FFI_PA64
 #endif
-
-  FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
 } ffi_abi;
 #endif
 
diff --git a/Modules/_ctypes/libffi/src/powerpc/aix.S b/Modules/_ctypes/libffi/src/powerpc/aix.S
index c6f8764..349e78c 100644
--- a/Modules/_ctypes/libffi/src/powerpc/aix.S
+++ b/Modules/_ctypes/libffi/src/powerpc/aix.S
@@ -1,5 +1,5 @@
 /* -----------------------------------------------------------------------
-   aix.S - Copyright (c) 2002,2009 Free Software Foundation, Inc.
+   aix.S - Copyright (c) 2002, 2009 Free Software Foundation, Inc.
    based on darwin.S by John Hornkvist
 
    PowerPC Assembly glue.
@@ -79,6 +79,8 @@
 	.set f20,20
 	.set f21,21
 
+	.extern .ffi_prep_args
+
 #define LIBFFI_ASM
 #include <fficonfig.h>
 #include <ffi.h>
@@ -125,6 +127,7 @@
 	/* Call ffi_prep_args.  */
 	mr	r4, r1
 	bl	.ffi_prep_args
+	nop
 
 	/* Now do the call.  */
 	ld	r0, 0(r29)
@@ -134,7 +137,7 @@
 	mtcrf	0x40, r31
 	mtctr	r0
 	/* Load all those argument registers.  */
-	// We have set up a nice stack frame, just load it into registers.
+	/* We have set up a nice stack frame, just load it into registers. */
 	ld	r3, 40+(1*8)(r1)
 	ld	r4, 40+(2*8)(r1)
 	ld	r5, 40+(3*8)(r1)
@@ -147,7 +150,7 @@
 
 L1:
 	/* Load all the FP registers.  */
-	bf	6,L2 // 2f + 0x18
+	bf	6,L2 /* 2f + 0x18 */
 	lfd	f1,-32-(13*8)(r28)
 	lfd	f2,-32-(12*8)(r28)
 	lfd	f3,-32-(11*8)(r28)
@@ -226,6 +229,7 @@
 	/* Call ffi_prep_args.  */
 	mr	r4, r1
 	bl	.ffi_prep_args
+	nop
 
 	/* Now do the call.  */
 	lwz	r0, 0(r29)
@@ -235,7 +239,7 @@
 	mtcrf	0x40, r31
 	mtctr	r0
 	/* Load all those argument registers.  */
-	// We have set up a nice stack frame, just load it into registers.
+	/* We have set up a nice stack frame, just load it into registers. */
 	lwz	r3, 20+(1*4)(r1)
 	lwz	r4, 20+(2*4)(r1)
 	lwz	r5, 20+(3*4)(r1)
@@ -248,7 +252,7 @@
 
 L1:
 	/* Load all the FP registers.  */
-	bf	6,L2 // 2f + 0x18
+	bf	6,L2 /* 2f + 0x18 */
 	lfd	f1,-16-(13*8)(r28)
 	lfd	f2,-16-(12*8)(r28)
 	lfd	f3,-16-(11*8)(r28)
@@ -303,7 +307,7 @@
 #endif
 	.long 0
 	.byte 0,0,0,1,128,4,0,0
-//END(ffi_call_AIX)
+/* END(ffi_call_AIX) */
 
 .csect .text[PR]
 	.align 2
@@ -321,4 +325,4 @@
 	blr
 	.long 0
 	.byte 0,0,0,0,0,0,0,0
-//END(ffi_call_DARWIN)
+/* END(ffi_call_DARWIN) */
diff --git a/Modules/_ctypes/libffi/src/powerpc/aix_closure.S b/Modules/_ctypes/libffi/src/powerpc/aix_closure.S
index 5c74448..aabd3c3 100644
--- a/Modules/_ctypes/libffi/src/powerpc/aix_closure.S
+++ b/Modules/_ctypes/libffi/src/powerpc/aix_closure.S
@@ -79,6 +79,8 @@
 	.set f20,20
 	.set f21,21
 
+	.extern .ffi_closure_helper_DARWIN
+
 #define LIBFFI_ASM
 #define JUMPTARGET(name) name
 #define L(x) x
@@ -165,6 +167,7 @@
 
 	/* look up the proper starting point in table  */
 	/* by using return type as offset */
+	lhz	r3, 10(r3)	/* load type from return type */
 	ld	r4, LC..60(2)	/* get address of jump table */
 	sldi	r3, r3, 4	/* now multiply return type by 16 */
 	ld	r0, 240+16(r1)	/* load return address */
@@ -337,8 +340,9 @@
 
 	/* look up the proper starting point in table  */
 	/* by using return type as offset */
+	lhz	r3, 6(r3)	/* load type from return type */
 	lwz	r4, LC..60(2)	/* get address of jump table */
-	slwi	r3, r3, 4	/* now multiply return type by 4 */
+	slwi	r3, r3, 4	/* now multiply return type by 16 */
 	lwz	r0, 176+8(r1)	/* load return address */
 	add	r3, r3, r4	/* add contents of table to table address */
 	mtctr	r3
diff --git a/Modules/_ctypes/libffi/src/powerpc/asm.h b/Modules/_ctypes/libffi/src/powerpc/asm.h
index e86e6b0..994f62d 100644
--- a/Modules/_ctypes/libffi/src/powerpc/asm.h
+++ b/Modules/_ctypes/libffi/src/powerpc/asm.h
@@ -42,7 +42,7 @@
 
 /* If compiled for profiling, call `_mcount' at the start of each function.  */
 #ifdef	PROF
-/* The mcount code relies on a the return address being on the stack
+/* The mcount code relies on the return address being on the stack
    to locate our caller and so it can restore it; so store one just
    for its benefit.  */
 #ifdef PIC
diff --git a/Modules/_ctypes/libffi/src/powerpc/darwin.S b/Modules/_ctypes/libffi/src/powerpc/darwin.S
index d8a1df5..4f987dc 100644
--- a/Modules/_ctypes/libffi/src/powerpc/darwin.S
+++ b/Modules/_ctypes/libffi/src/powerpc/darwin.S
@@ -1,6 +1,6 @@
 /* -----------------------------------------------------------------------
    darwin.S - Copyright (c) 2000 John Hornkvist
-	      Copyright (c) 2004 Free Software Foundation, Inc.
+	      Copyright (c) 2004, 2010 Free Software Foundation, Inc.
 
    PowerPC Assembly glue.
 
@@ -24,51 +24,92 @@
    OTHER DEALINGS IN THE SOFTWARE.
    ----------------------------------------------------------------------- */
 
+#define LIBFFI_ASM
 #if defined(__ppc64__)
 #define MODE_CHOICE(x, y) y
 #else
 #define MODE_CHOICE(x, y) x
 #endif
 
-#define g_long  MODE_CHOICE(long, quad)         /* usage is ".g_long" */
+#define machine_choice	MODE_CHOICE(ppc7400,ppc64)
 
-#define LOG2_GPR_BYTES  MODE_CHOICE(2,3)        /* log2(GPR_BYTES) */
+; Define some pseudo-opcodes for size-independent load & store of GPRs ...
+#define lgu		MODE_CHOICE(lwzu, ldu)
+#define lg		MODE_CHOICE(lwz,ld)
+#define sg		MODE_CHOICE(stw,std)
+#define sgu		MODE_CHOICE(stwu,stdu)
+#define sgux		MODE_CHOICE(stwux,stdux)
 
-#define LIBFFI_ASM
+; ... and the size of GPRs and their storage indicator.
+#define GPR_BYTES	MODE_CHOICE(4,8)
+#define LOG2_GPR_BYTES	MODE_CHOICE(2,3)	/* log2(GPR_BYTES) */
+#define g_long		MODE_CHOICE(long, quad)	/* usage is ".g_long" */
+
+; From the ABI doc: "Mac OS X ABI Function Call Guide" Version 2009-02-04.
+#define LINKAGE_SIZE	MODE_CHOICE(24,48)
+#define PARAM_AREA	MODE_CHOICE(32,64)
+#define SAVED_LR_OFFSET	MODE_CHOICE(8,16)	/* save position for lr */
+
+/* If there is any FP stuff we make space for all of the regs.  */
+#define SAVED_FPR_COUNT 13
+#define FPR_SIZE	8
+#define RESULT_BYTES	16
+
+/* This should be kept in step with the same value in ffi_darwin.c.  */
+#define ASM_NEEDS_REGISTERS 4
+#define SAVE_REGS_SIZE (ASM_NEEDS_REGISTERS * GPR_BYTES)
+
 #include <fficonfig.h>
 #include <ffi.h>
+
 #define JUMPTARGET(name) name
 #define L(x) x
-.text
-	.align 2
-.globl _ffi_prep_args
 
-.text
+	.text
 	.align 2
-.globl _ffi_call_DARWIN
-.text
+	.globl _ffi_prep_args
+
 	.align 2
+	.globl _ffi_call_DARWIN
+
+	/* We arrive here with:
+	   r3 = ptr to extended cif.
+	   r4 = -bytes.
+	   r5 = cif flags.
+	   r6 = ptr to return value.
+	   r7 = fn pointer (user func).
+	   r8 = fn pointer (ffi_prep_args).
+	   r9 = ffi_type* for the ret val.  */
+
 _ffi_call_DARWIN:
-LFB0:
+Lstartcode:
 	mr   	r12,r8	/* We only need r12 until the call,
-			   so it doesn't have to be saved.  */
+			   so it does not have to be saved.  */
 LFB1:
 	/* Save the old stack pointer as AP.  */
 	mr	r8,r1
 LCFI0:
+	
+	/* Save the retval type in parents frame.  */
+	sg	r9,(LINKAGE_SIZE+6*GPR_BYTES)(r8)
+
 	/* Allocate the stack space we need.  */
-	stwux	r1,r1,r4
+	sgux	r1,r1,r4
 
 	/* Save registers we use.  */
 	mflr	r9
+	sg	r9,SAVED_LR_OFFSET(r8)
 
-	stw	r28,-16(r8)	
-	stw	r29,-12(r8)
-	stw	r30,-8(r8)
-	stw	r31,-4(r8)
+	sg	r28,-(4 * GPR_BYTES)(r8)	
+	sg	r29,-(3 * GPR_BYTES)(r8)
+	sg	r30,-(2 * GPR_BYTES)(r8)
+	sg	r31,-(    GPR_BYTES)(r8)
 
-	stw	r9,8(r8)
-	stw	r2,20(r1)
+#if !defined(POWERPC_DARWIN)
+	/* The TOC slot is reserved in the Darwin ABI and r2 is volatile.  */
+	sg	r2,(5 * GPR_BYTES)(r1)
+#endif
+
 LCFI1:
 
 	/* Save arguments over call.  */
@@ -77,14 +118,17 @@
 	mr	r29,r7	/* function address,  */
 	mr	r28,r8	/* our AP.  */
 LCFI2:
-	/* Call ffi_prep_args.  */
+	/* Call ffi_prep_args. r3 = extended cif, r4 = stack ptr copy.  */
 	mr	r4,r1
 	li	r9,0
 
 	mtctr	r12 /* r12 holds address of _ffi_prep_args.  */
 	bctrl
-	lwz     r2,20(r1)
 
+#if !defined(POWERPC_DARWIN)
+	/* The TOC slot is reserved in the Darwin ABI and r2 is volatile.  */
+	lg     r2,(5 * GPR_BYTES)(r1)
+#endif
 	/* Now do the call.
 	   Set up cr1 with bits 4-7 of the flags.  */
 	mtcrf	0x40,r31
@@ -92,71 +136,130 @@
 	mtctr	r29
 	/* Load all those argument registers.
 	   We have set up a nice stack frame, just load it into registers.  */
-	lwz     r3,20+(1*4)(r1)
-	lwz     r4,20+(2*4)(r1)
-	lwz     r5,20+(3*4)(r1)
-	lwz     r6,20+(4*4)(r1)
+	lg     r3, (LINKAGE_SIZE                )(r1)
+	lg     r4, (LINKAGE_SIZE +     GPR_BYTES)(r1)
+	lg     r5, (LINKAGE_SIZE + 2 * GPR_BYTES)(r1)
+	lg     r6, (LINKAGE_SIZE + 3 * GPR_BYTES)(r1)
 	nop
-	lwz     r7,20+(5*4)(r1)
-	lwz     r8,20+(6*4)(r1)
-	lwz     r9,20+(7*4)(r1)
-	lwz     r10,20+(8*4)(r1)
+	lg     r7, (LINKAGE_SIZE + 4 * GPR_BYTES)(r1)
+	lg     r8, (LINKAGE_SIZE + 5 * GPR_BYTES)(r1)
+	lg     r9, (LINKAGE_SIZE + 6 * GPR_BYTES)(r1)
+	lg     r10,(LINKAGE_SIZE + 7 * GPR_BYTES)(r1)
 
 L1:
-	/* Load all the FP registers.  */
+	/* ... Load all the FP registers.  */
 	bf	6,L2	/* No floats to load.  */
-	lfd	f1,-16-(13*8)(r28)
-	lfd	f2,-16-(12*8)(r28)
-	lfd	f3,-16-(11*8)(r28)
-	lfd	f4,-16-(10*8)(r28)
+	lfd	f1, -SAVE_REGS_SIZE-(13*FPR_SIZE)(r28)
+	lfd	f2, -SAVE_REGS_SIZE-(12*FPR_SIZE)(r28)
+	lfd	f3, -SAVE_REGS_SIZE-(11*FPR_SIZE)(r28)
+	lfd	f4, -SAVE_REGS_SIZE-(10*FPR_SIZE)(r28)
 	nop
-	lfd	f5,-16-(9*8)(r28)
-	lfd	f6,-16-(8*8)(r28)
-	lfd	f7,-16-(7*8)(r28)
-	lfd	f8,-16-(6*8)(r28)
+	lfd	f5, -SAVE_REGS_SIZE-( 9*FPR_SIZE)(r28)
+	lfd	f6, -SAVE_REGS_SIZE-( 8*FPR_SIZE)(r28)
+	lfd	f7, -SAVE_REGS_SIZE-( 7*FPR_SIZE)(r28)
+	lfd	f8, -SAVE_REGS_SIZE-( 6*FPR_SIZE)(r28)
 	nop
-	lfd     f9,-16-(5*8)(r28)
-	lfd     f10,-16-(4*8)(r28)
-	lfd     f11,-16-(3*8)(r28)
-	lfd     f12,-16-(2*8)(r28)
+	lfd     f9, -SAVE_REGS_SIZE-( 5*FPR_SIZE)(r28)
+	lfd     f10,-SAVE_REGS_SIZE-( 4*FPR_SIZE)(r28)
+	lfd     f11,-SAVE_REGS_SIZE-( 3*FPR_SIZE)(r28)
+	lfd     f12,-SAVE_REGS_SIZE-( 2*FPR_SIZE)(r28)
 	nop
-	lfd     f13,-16-(1*8)(r28)
+	lfd     f13,-SAVE_REGS_SIZE-( 1*FPR_SIZE)(r28)
 
 L2:
 	mr	r12,r29	/* Put the target address in r12 as specified.  */
 	mtctr  	r12
 	nop
 	nop
+
 	/* Make the call.  */
 	bctrl
 
 	/* Now, deal with the return value.  */
-	mtcrf	0x01,r31
 
-	bt	30,L(done_return_value)
-	bt	29,L(fp_return_value)
-	stw	r3,0(r30)
-	bf	28,L(done_return_value)
-	stw	r4,4(r30)
+	/* m64 structure returns can occupy the same set of registers as
+	   would be used to pass such a structure as arg0 - so take care 
+	   not to step on any possibly hot regs.  */
 
-	/* Fall through.  */
+	/* Get the flags.. */
+	mtcrf	0x03,r31 ; we need c6 & cr7 now.
+	; FLAG_RETURNS_NOTHING also covers struct ret-by-ref.
+	bt	30,L(done_return_value)	  ; FLAG_RETURNS_NOTHING
+	bf	27,L(scalar_return_value) ; not FLAG_RETURNS_STRUCT
+	
+	/* OK, so we have a struct.  */
+#if defined(__ppc64__)
+	bt	31,L(maybe_return_128) ; FLAG_RETURNS_128BITS, special case 
 
-L(done_return_value):
-	/* Restore the registers we used and return.  */
-	lwz	r9,8(r28)
-	lwz	r31,-4(r28)
-	mtlr	r9
-	lwz	r30,-8(r28)
-	lwz	r29,-12(r28)
-	lwz	r28,-16(r28)
-	lwz	r1,0(r1)
-	blr
+	/* OK, we have to map the return back to a mem struct.
+	   We are about to trample the parents param area, so recover the
+	   return type.  r29 is free, since the call is done.  */
+	lg	r29,(LINKAGE_SIZE + 6 * GPR_BYTES)(r28)
+
+	sg	r3, (LINKAGE_SIZE                )(r28)
+	sg	r4, (LINKAGE_SIZE +     GPR_BYTES)(r28)
+	sg	r5, (LINKAGE_SIZE + 2 * GPR_BYTES)(r28)
+	sg	r6, (LINKAGE_SIZE + 3 * GPR_BYTES)(r28)
+	nop
+	sg	r7, (LINKAGE_SIZE + 4 * GPR_BYTES)(r28)
+	sg	r8, (LINKAGE_SIZE + 5 * GPR_BYTES)(r28)
+	sg	r9, (LINKAGE_SIZE + 6 * GPR_BYTES)(r28)
+	sg	r10,(LINKAGE_SIZE + 7 * GPR_BYTES)(r28)
+	/* OK, so do the block move - we trust that memcpy will not trample
+	   the fprs...  */
+	mr 	r3,r30 ; dest
+	addi	r4,r28,LINKAGE_SIZE ; source
+	/* The size is a size_t, should be long.  */
+	lg	r5,0(r29)
+	/* Figure out small structs */
+	cmpi	0,r5,4
+	bgt	L3	; 1, 2 and 4 bytes have special rules.
+	cmpi	0,r5,3
+	beq	L3	; not 3
+	addi	r4,r4,8
+	subf	r4,r5,r4
+L3:
+	bl	_memcpy
+	
+	/* ... do we need the FP registers? - recover the flags.. */
+	mtcrf	0x03,r31 ; we need c6 & cr7 now.
+	bf	29,L(done_return_value)	/* No floats in the struct.  */
+	stfd	f1, -SAVE_REGS_SIZE-(13*FPR_SIZE)(r28)
+	stfd	f2, -SAVE_REGS_SIZE-(12*FPR_SIZE)(r28)
+	stfd	f3, -SAVE_REGS_SIZE-(11*FPR_SIZE)(r28)
+	stfd	f4, -SAVE_REGS_SIZE-(10*FPR_SIZE)(r28)
+	nop
+	stfd	f5, -SAVE_REGS_SIZE-( 9*FPR_SIZE)(r28)
+	stfd	f6, -SAVE_REGS_SIZE-( 8*FPR_SIZE)(r28)
+	stfd	f7, -SAVE_REGS_SIZE-( 7*FPR_SIZE)(r28)
+	stfd	f8, -SAVE_REGS_SIZE-( 6*FPR_SIZE)(r28)
+	nop
+	stfd	f9, -SAVE_REGS_SIZE-( 5*FPR_SIZE)(r28)
+	stfd	f10,-SAVE_REGS_SIZE-( 4*FPR_SIZE)(r28)
+	stfd	f11,-SAVE_REGS_SIZE-( 3*FPR_SIZE)(r28)
+	stfd	f12,-SAVE_REGS_SIZE-( 2*FPR_SIZE)(r28)
+	nop
+	stfd	f13,-SAVE_REGS_SIZE-( 1*FPR_SIZE)(r28)
+
+	mr	r3,r29	; ffi_type *
+	mr	r4,r30	; dest
+	addi	r5,r28,-SAVE_REGS_SIZE-(13*FPR_SIZE) ; fprs
+	xor	r6,r6,r6
+	sg	r6,(LINKAGE_SIZE + 7 * GPR_BYTES)(r28)
+	addi	r6,r28,(LINKAGE_SIZE + 7 * GPR_BYTES) ; point to a zeroed counter.
+	bl 	_darwin64_struct_floats_to_mem
+
+	b L(done_return_value)
+#else
+	stw	r3,0(r30) ; m32 the only struct return in reg is 4 bytes.
+#endif
+	b L(done_return_value)
 
 L(fp_return_value):
 	/* Do we have long double to store?  */
-	bf	31,L(fd_return_value)
+	bf	31,L(fd_return_value) ; FLAG_RETURNS_128BITS
 	stfd	f1,0(r30)
-	stfd	f2,8(r30)
+	stfd	f2,FPR_SIZE(r30)
 	b	L(done_return_value)
 
 L(fd_return_value):
@@ -170,21 +273,57 @@
 	stfs	f1,0(r30)
 	b	L(done_return_value)
 
+L(scalar_return_value):
+	bt	29,L(fp_return_value)	; FLAG_RETURNS_FP
+	; ffi_arg is defined as unsigned long. 
+	sg	r3,0(r30)		; Save the reg.
+	bf	28,L(done_return_value) ; not FLAG_RETURNS_64BITS 
+
+#if defined(__ppc64__)
+L(maybe_return_128):
+	std	r3,0(r30)
+	bf	31,L(done_return_value) ; not FLAG_RETURNS_128BITS 
+	std	r4,8(r30)
+#else
+	stw	r4,4(r30)
+#endif
+
+	/* Fall through.  */
+	/* We want this at the end to simplify eh epilog computation.  */
+
+L(done_return_value):
+	/* Restore the registers we used and return.  */
+	lg	r29,SAVED_LR_OFFSET(r28)
+	; epilog
+	lg	r31,-(1 * GPR_BYTES)(r28)
+	mtlr	r29
+	lg	r30,-(2 * GPR_BYTES)(r28)
+	lg	r29,-(3 * GPR_BYTES)(r28)
+	lg	r28,-(4 * GPR_BYTES)(r28)
+	lg	r1,0(r1)
+	blr
 LFE1:
+	.align	1
 /* END(_ffi_call_DARWIN)  */
 
 /* Provide a null definition of _ffi_call_AIX.  */
-.text
-	.align 2
-.globl _ffi_call_AIX
-.text
+	.text
+	.globl _ffi_call_AIX
 	.align 2
 _ffi_call_AIX:
 	blr
 /* END(_ffi_call_AIX)  */
 
-.data
-.section __TEXT,__eh_frame,coalesced,no_toc+strip_static_syms
+/* EH stuff.  */
+
+#define EH_DATA_ALIGN_FACT MODE_CHOICE(0x7c,0x78)
+
+	.static_data
+	.align LOG2_GPR_BYTES
+LLFB0$non_lazy_ptr:
+	.g_long Lstartcode
+
+	.section __TEXT,__eh_frame,coalesced,no_toc+strip_static_syms+live_support
 EH_frame1:
 	.set	L$set$0,LECIE1-LSCIE1
 	.long	L$set$0	; Length of Common Information Entry
@@ -193,16 +332,17 @@
 	.byte	0x1	; CIE Version
 	.ascii	"zR\0"	; CIE Augmentation
 	.byte	0x1	; uleb128 0x1; CIE Code Alignment Factor
-	.byte	0x7c	; sleb128 -4; CIE Data Alignment Factor
+	.byte	EH_DATA_ALIGN_FACT ; sleb128 -4; CIE Data Alignment Factor
 	.byte	0x41	; CIE RA Column
 	.byte	0x1	; uleb128 0x1; Augmentation size
-	.byte	0x90	; FDE Encoding (indirect pcrel)
+	.byte	0x10	; FDE Encoding (indirect pcrel)
 	.byte	0xc	; DW_CFA_def_cfa
 	.byte	0x1	; uleb128 0x1
 	.byte	0x0	; uleb128 0x0
 	.align	LOG2_GPR_BYTES
 LECIE1:
-.globl _ffi_call_DARWIN.eh
+
+	.globl _ffi_call_DARWIN.eh
 _ffi_call_DARWIN.eh:
 LSFDE1:
 	.set	L$set$1,LEFDE1-LASFDE1
@@ -210,11 +350,11 @@
 LASFDE1:
 	.long	LASFDE1-EH_frame1 ; FDE CIE offset
 	.g_long	LLFB0$non_lazy_ptr-.	; FDE initial location
-	.set	L$set$3,LFE1-LFB0
+	.set	L$set$3,LFE1-Lstartcode
 	.g_long	L$set$3	; FDE address range
 	.byte   0x0     ; uleb128 0x0; Augmentation size
 	.byte	0x4	; DW_CFA_advance_loc4
-	.set	L$set$4,LCFI0-LFB1
+	.set	L$set$4,LCFI0-Lstartcode
 	.long	L$set$4
 	.byte	0xd	; DW_CFA_def_cfa_register
 	.byte	0x08	; uleb128 0x08
@@ -239,7 +379,5 @@
 	.byte	0x1c	; uleb128 0x1c
 	.align LOG2_GPR_BYTES
 LEFDE1:
-.data
-	.align LOG2_GPR_BYTES
-LLFB0$non_lazy_ptr:
-	.g_long LFB0
+	.align 1
+
diff --git a/Modules/_ctypes/libffi/src/powerpc/darwin_closure.S b/Modules/_ctypes/libffi/src/powerpc/darwin_closure.S
index 7959838..3f6790f 100644
--- a/Modules/_ctypes/libffi/src/powerpc/darwin_closure.S
+++ b/Modules/_ctypes/libffi/src/powerpc/darwin_closure.S
@@ -1,6 +1,7 @@
 /* -----------------------------------------------------------------------
-   darwin_closure.S - Copyright (c) 2002, 2003, 2004, Free Software Foundation,
-   Inc. based on ppc_closure.S
+   darwin_closure.S - Copyright (c) 2002, 2003, 2004, 2010, 
+   Free Software Foundation, Inc. 
+   based on ppc_closure.S
 
    PowerPC Assembly glue.
 
@@ -33,91 +34,177 @@
 #define MODE_CHOICE(x, y) x
 #endif
 
-#define lgu     MODE_CHOICE(lwzu, ldu)
+#define machine_choice	MODE_CHOICE(ppc7400,ppc64)
 
-#define g_long  MODE_CHOICE(long, quad)         /* usage is ".g_long" */
+; Define some pseudo-opcodes for size-independent load & store of GPRs ...
+#define lgu		MODE_CHOICE(lwzu, ldu)
+#define lg		MODE_CHOICE(lwz,ld)
+#define sg		MODE_CHOICE(stw,std)
+#define sgu		MODE_CHOICE(stwu,stdu)
 
-#define LOG2_GPR_BYTES  MODE_CHOICE(2,3)        /* log2(GPR_BYTES) */
+; ... and the size of GPRs and their storage indicator.
+#define GPR_BYTES	MODE_CHOICE(4,8)
+#define LOG2_GPR_BYTES	MODE_CHOICE(2,3)	/* log2(GPR_BYTES) */
+#define g_long		MODE_CHOICE(long, quad)	/* usage is ".g_long" */
+
+; From the ABI doc: "Mac OS X ABI Function Call Guide" Version 2009-02-04.
+#define LINKAGE_SIZE	MODE_CHOICE(24,48)
+#define PARAM_AREA	MODE_CHOICE(32,64)
+
+#define SAVED_CR_OFFSET	MODE_CHOICE(4,8)	/* save position for CR */
+#define SAVED_LR_OFFSET	MODE_CHOICE(8,16)	/* save position for lr */
+
+/* WARNING: if ffi_type is changed... here be monsters.  
+   Offsets of items within the result type.  */
+#define FFI_TYPE_TYPE	MODE_CHOICE(6,10)
+#define FFI_TYPE_ELEM	MODE_CHOICE(8,16)
+
+#define SAVED_FPR_COUNT 13
+#define FPR_SIZE	8
+/* biggest m64 struct ret is 8GPRS + 13FPRS = 168 bytes - rounded to 16bytes = 176. */
+#define RESULT_BYTES	MODE_CHOICE(16,176)
+
+; The whole stack frame **MUST** be 16byte-aligned.
+#define SAVE_SIZE (((LINKAGE_SIZE+PARAM_AREA+SAVED_FPR_COUNT*FPR_SIZE+RESULT_BYTES)+15) & -16LL)
+#define PAD_SIZE (SAVE_SIZE-(LINKAGE_SIZE+PARAM_AREA+SAVED_FPR_COUNT*FPR_SIZE+RESULT_BYTES))
+
+#define PARENT_PARM_BASE (SAVE_SIZE+LINKAGE_SIZE)
+#define FP_SAVE_BASE (LINKAGE_SIZE+PARAM_AREA)
+
+#if defined(__ENVIRONMENT_MAC_OS_X_VERSION_MIN_REQUIRED__) && __ENVIRONMENT_MAC_OS_X_VERSION_MIN_REQUIRED__ >= 1050
+; We no longer need the pic symbol stub for Darwin >= 9.
+#define BLCLS_HELP _ffi_closure_helper_DARWIN
+#define STRUCT_RETVALUE_P _darwin64_struct_ret_by_value_p
+#define PASS_STR_FLOATS _darwin64_pass_struct_floats
+#undef WANT_STUB
+#else
+#define BLCLS_HELP L_ffi_closure_helper_DARWIN$stub
+#define STRUCT_RETVALUE_P L_darwin64_struct_ret_by_value_p$stub
+#define PASS_STR_FLOATS L_darwin64_pass_struct_floats$stub
+#define WANT_STUB
+#endif
+
+/* m32/m64
+
+   The stack layout looks like this:
+
+   |   Additional params...			| |     Higher address
+   ~						~ ~
+   |   Parameters      (at least 8*4/8=32/64)	| | NUM_GPR_ARG_REGISTERS
+   |--------------------------------------------| |
+   |   TOC=R2 (AIX) Reserved (Darwin)   4/8	| |
+   |--------------------------------------------| |
+   |   Reserved                       2*4/8	| |
+   |--------------------------------------------| |
+   |   Space for callee`s LR		4/8	| |
+   |--------------------------------------------| |
+   |   Saved CR [low word for m64]      4/8	| |
+   |--------------------------------------------| |
+   |   Current backchain pointer	4/8	|-/ Parent`s frame.
+   |--------------------------------------------| <+ <<< on entry to
+   |   Result Bytes		       16/176	| |
+   |--------------------------------------------| |
+   ~   padding to 16-byte alignment		~ ~
+   |--------------------------------------------| |
+   |   NUM_FPR_ARG_REGISTERS slots		| |
+   |   here fp13 .. fp1		       13*8	| |
+   |--------------------------------------------| |
+   |   R3..R10			  8*4/8=32/64	| | NUM_GPR_ARG_REGISTERS
+   |--------------------------------------------| |
+   |   TOC=R2 (AIX) Reserved (Darwin)   4/8	| |
+   |--------------------------------------------| |	stack	|
+   |   Reserved [compiler,binder]     2*4/8	| |	grows	|
+   |--------------------------------------------| |	down	V
+   |   Space for callees LR		4/8	| |
+   |--------------------------------------------| |	lower addresses
+   |   Saved CR [low word for m64]      4/8	| |
+   |--------------------------------------------| |     stack pointer here
+   |   Current backchain pointer	4/8	|-/	during
+   |--------------------------------------------|   <<<	call.
+
+*/
 
 	.file	"darwin_closure.S"
-.text
-	.align LOG2_GPR_BYTES
-.globl _ffi_closure_ASM
 
-.text
+	.machine machine_choice
+
+	.text
+	.globl _ffi_closure_ASM
 	.align LOG2_GPR_BYTES
 _ffi_closure_ASM:
 LFB1:
-	mflr	r0		/* extract return address  */
-	stw	r0,8(r1)	/* save the return address  */
+Lstartcode:
+	mflr	r0			/* extract return address  */
+	sg	r0,SAVED_LR_OFFSET(r1)	/* save the return address  */
 LCFI0:
-	/* 24 Bytes (Linkage Area)
-	   32 Bytes (outgoing parameter area, always reserved)
-	   104 Bytes (13*8 from FPR)
-	   16 Bytes (result)
-	   176 Bytes  */
-
-	stwu	r1,-176(r1)	/* skip over caller save area
-				keep stack aligned to 16.  */
+	sgu	r1,-SAVE_SIZE(r1)	/* skip over caller save area
+					keep stack aligned to 16.  */
 LCFI1:
 	/* We want to build up an area for the parameters passed
 	   in registers. (both floating point and integer)  */
 
-	/* We store gpr 3 to gpr 10 (aligned to 4)
-	   in the parents outgoing area.  */
-	stw   r3,200(r1)
-	stw   r4,204(r1)
-	stw   r5,208(r1)
-	stw   r6,212(r1)
-	stw   r7,216(r1)
-	stw   r8,220(r1)
-	stw   r9,224(r1)
-	stw   r10,228(r1)
+	/* Put gpr 3 to gpr 10 in the parents outgoing area...
+	   ... the remainder of any params that overflowed the regs will
+	   follow here.  */
+	sg	r3, (PARENT_PARM_BASE                )(r1)
+	sg	r4, (PARENT_PARM_BASE + GPR_BYTES    )(r1)
+	sg	r5, (PARENT_PARM_BASE + GPR_BYTES * 2)(r1)
+	sg	r6, (PARENT_PARM_BASE + GPR_BYTES * 3)(r1)
+	sg	r7, (PARENT_PARM_BASE + GPR_BYTES * 4)(r1)
+	sg	r8, (PARENT_PARM_BASE + GPR_BYTES * 5)(r1)
+	sg	r9, (PARENT_PARM_BASE + GPR_BYTES * 6)(r1)
+	sg	r10,(PARENT_PARM_BASE + GPR_BYTES * 7)(r1)
 
-	/* We save fpr 1 to fpr 13. (aligned to 8)  */
-	stfd  f1,56(r1)
-	stfd  f2,64(r1)
-	stfd  f3,72(r1)
-	stfd  f4,80(r1)
-	stfd  f5,88(r1)
-	stfd  f6,96(r1)
-	stfd  f7,104(r1)
-	stfd  f8,112(r1)
-	stfd  f9,120(r1)
-	stfd  f10,128(r1)
-	stfd  f11,136(r1)
-	stfd  f12,144(r1)
-	stfd  f13,152(r1)
+	/* We save fpr 1 to fpr 14 in our own save frame.  */
+	stfd	f1, (FP_SAVE_BASE                 )(r1)
+	stfd	f2, (FP_SAVE_BASE +  FPR_SIZE     )(r1)
+	stfd	f3, (FP_SAVE_BASE +  FPR_SIZE * 2 )(r1)
+	stfd	f4, (FP_SAVE_BASE +  FPR_SIZE * 3 )(r1)
+	stfd	f5, (FP_SAVE_BASE +  FPR_SIZE * 4 )(r1)
+	stfd	f6, (FP_SAVE_BASE +  FPR_SIZE * 5 )(r1)
+	stfd	f7, (FP_SAVE_BASE +  FPR_SIZE * 6 )(r1)
+	stfd	f8, (FP_SAVE_BASE +  FPR_SIZE * 7 )(r1)
+	stfd	f9, (FP_SAVE_BASE +  FPR_SIZE * 8 )(r1)
+	stfd	f10,(FP_SAVE_BASE +  FPR_SIZE * 9 )(r1)
+	stfd	f11,(FP_SAVE_BASE +  FPR_SIZE * 10)(r1)
+	stfd	f12,(FP_SAVE_BASE +  FPR_SIZE * 11)(r1)
+	stfd	f13,(FP_SAVE_BASE +  FPR_SIZE * 12)(r1)
 
 	/* Set up registers for the routine that actually does the work
 	   get the context pointer from the trampoline.  */
-	mr r3,r11
+	mr	r3,r11
 
 	/* Now load up the pointer to the result storage.  */
-	addi r4,r1,160
+	addi	r4,r1,(SAVE_SIZE-RESULT_BYTES)
 
 	/* Now load up the pointer to the saved gpr registers.  */
-	addi r5,r1,200
+	addi	r5,r1,PARENT_PARM_BASE
 
 	/* Now load up the pointer to the saved fpr registers.  */
-	addi r6,r1,56
+	addi	r6,r1,FP_SAVE_BASE
 
 	/* Make the call.  */
-	bl	Lffi_closure_helper_DARWIN$stub
+	bl	BLCLS_HELP
 
-	/* Now r3 contains the return type
-	   so use it to look up in a table
+	/* r3 contains the rtype pointer... save it since we will need
+	   it later.  */
+	sg	r3,LINKAGE_SIZE(r1)	; ffi_type * result_type
+	lg	r0,0(r3)		; size => r0
+	lhz	r3,FFI_TYPE_TYPE(r3)	; type => r3
+
+	/* The helper will have intercepted struture returns and inserted
+	   the caller`s destination address for structs returned by ref.  */
+
+	/* r3 contains the return type  so use it to look up in a table
 	   so we know how to deal with each type.  */
 
-	/* Look up the proper starting point in table
-	   by using return type as offset.  */
-	addi  r5,r1,160		  /* Get pointer to results area.  */
-	bl    Lget_ret_type0_addr /* Get pointer to Lret_type0 into LR.  */
-	mflr  r4		  /* Move to r4.  */
-	slwi  r3,r3,4		  /* Now multiply return type by 16.  */
-	add   r3,r3,r4		  /* Add contents of table to table address.  */
-	mtctr r3
-	bctr			  /* Jump to it.  */
+	addi	r5,r1,(SAVE_SIZE-RESULT_BYTES) /* Otherwise, our return is here.  */
+	bl	Lget_ret_type0_addr	/* Get pointer to Lret_type0 into LR.  */
+	mflr	r4			/* Move to r4.  */
+	slwi	r3,r3,4			/* Now multiply return type by 16.  */
+	add	r3,r3,r4		/* Add contents of table to table address.  */
+	mtctr	r3
+	bctr			 	 /* Jump to it.  */
 LFE1:
 /* Each of the ret_typeX code fragments has to be exactly 16 bytes long
    (4 instructions). For cache effectiveness we align to a 16 byte boundary
@@ -140,7 +227,7 @@
 
 /* case FFI_TYPE_INT  */
 Lret_type1:
-	lwz	r3,0(r5)
+	lg	r3,0(r5)
 	b	Lfinish
 	nop
 	nop
@@ -168,85 +255,224 @@
 
 /* case FFI_TYPE_UINT8  */
 Lret_type5:
+#if defined(__ppc64__)
+	lbz	r3,7(r5)
+#else
 	lbz	r3,3(r5)
+#endif
 	b	Lfinish
 	nop
 	nop
 
 /* case FFI_TYPE_SINT8  */
 Lret_type6:
+#if defined(__ppc64__)
+	lbz	r3,7(r5)
+#else
 	lbz	r3,3(r5)
+#endif
 	extsb	r3,r3
 	b	Lfinish
 	nop
 
 /* case FFI_TYPE_UINT16  */
 Lret_type7:
+#if defined(__ppc64__)
+	lhz	r3,6(r5)
+#else
 	lhz	r3,2(r5)
+#endif
 	b	Lfinish
 	nop
 	nop
 
 /* case FFI_TYPE_SINT16  */
 Lret_type8:
+#if defined(__ppc64__)
+	lha	r3,6(r5)
+#else
 	lha	r3,2(r5)
+#endif
 	b	Lfinish
 	nop
 	nop
 
 /* case FFI_TYPE_UINT32  */
 Lret_type9:
+#if defined(__ppc64__)
+	lwz	r3,4(r5)
+#else
 	lwz	r3,0(r5)
+#endif
 	b	Lfinish
 	nop
 	nop
 
 /* case FFI_TYPE_SINT32  */
 Lret_type10:
+#if defined(__ppc64__)
+	lwz	r3,4(r5)
+#else
 	lwz	r3,0(r5)
+#endif
 	b	Lfinish
 	nop
 	nop
 
 /* case FFI_TYPE_UINT64  */
 Lret_type11:
+#if defined(__ppc64__)
+	lg	r3,0(r5)
+	b	Lfinish
+	nop
+#else
 	lwz	r3,0(r5)
 	lwz	r4,4(r5)
 	b	Lfinish
+#endif
 	nop
 
 /* case FFI_TYPE_SINT64  */
 Lret_type12:
+#if defined(__ppc64__)
+	lg	r3,0(r5)
+	b	Lfinish
+	nop
+#else
 	lwz	r3,0(r5)
 	lwz	r4,4(r5)
 	b	Lfinish
+#endif
 	nop
 
 /* case FFI_TYPE_STRUCT  */
 Lret_type13:
+#if defined(__ppc64__)
+	lg	r3,0(r5)		; we need at least this...
+	cmpi	0,r0,4
+	bgt	Lstructend		; not a special small case
+	b	Lsmallstruct		; see if we need more.
+#else
+	cmpi	0,r0,4
+	bgt	Lfinish		; not by value
+	lg	r3,0(r5)
 	b	Lfinish
-	nop
+#endif
+/* case FFI_TYPE_POINTER  */
+Lret_type14:
+	lg	r3,0(r5)
+	b	Lfinish
 	nop
 	nop
 
-/* case FFI_TYPE_POINTER  */
-Lret_type14:
-	lwz	r3,0(r5)
-	b	Lfinish
-	nop
-	nop
+#if defined(__ppc64__)
+Lsmallstruct:
+	beq	Lfour			; continuation of Lret13.
+	cmpi	0,r0,3
+	beq	Lfinish			; don`t adjust this - can`t be any floats here...
+	srdi	r3,r3,48
+	cmpi	0,r0,2
+	beq	Lfinish			; .. or here ..
+	srdi	r3,r3,8
+	b 	Lfinish			; .. or here.
+
+Lfour:
+	lg	r6,LINKAGE_SIZE(r1)	; get the result type
+	lg	r6,FFI_TYPE_ELEM(r6)	; elements array pointer
+	lg	r6,0(r6)		; first element
+	lhz	r0,FFI_TYPE_TYPE(r6)	; OK go the type
+	cmpi	0,r0,2			; FFI_TYPE_FLOAT
+	bne	Lfourint
+	lfs	f1,0(r5)		; just one float in the struct.
+	b 	Lfinish
+
+Lfourint:
+	srdi	r3,r3,32		; four bytes.
+	b 	Lfinish
+
+Lstructend:
+	lg	r3,LINKAGE_SIZE(r1)	; get the result type
+	bl	STRUCT_RETVALUE_P
+	cmpi	0,r3,0
+	beq	Lfinish			; nope.
+	/* Recover a pointer to the results.  */
+	addi	r11,r1,(SAVE_SIZE-RESULT_BYTES)
+	lg	r3,0(r11)		; we need at least this...
+	lg	r4,8(r11)
+	cmpi	0,r0,16
+	beq	Lfinish		; special case 16 bytes we don't consider floats.
+
+	/* OK, frustratingly, the process of saving the struct to mem might have
+	   messed with the FPRs, so we have to re-load them :(.
+	   We`ll use our FPRs space again - calling: 
+	   void darwin64_pass_struct_floats (ffi_type *s, char *src, 
+					     unsigned *nfpr, double **fprs) 
+	   We`ll temporarily pinch the first two slots of the param area for local
+	   vars used by the routine.  */
+	xor	r6,r6,r6
+	addi	r5,r1,PARENT_PARM_BASE		; some space
+	sg	r6,0(r5)			; *nfpr zeroed.
+	addi	r6,r5,8				; **fprs
+	addi	r3,r1,FP_SAVE_BASE		; pointer to FPRs space
+	sg	r3,0(r6)
+	mr	r4,r11				; the struct is here...
+	lg	r3,LINKAGE_SIZE(r1)		; ffi_type * result_type.
+	bl	PASS_STR_FLOATS			; get struct floats into FPR save space.
+	/* See if we used any floats  */
+	lwz	r0,(SAVE_SIZE-RESULT_BYTES)(r1)	
+	cmpi	0,r0,0
+	beq	Lstructints			; nope.
+	/* OK load `em up... */
+	lfd	f1, (FP_SAVE_BASE                 )(r1)
+	lfd	f2, (FP_SAVE_BASE +  FPR_SIZE     )(r1)
+	lfd	f3, (FP_SAVE_BASE +  FPR_SIZE * 2 )(r1)
+	lfd	f4, (FP_SAVE_BASE +  FPR_SIZE * 3 )(r1)
+	lfd	f5, (FP_SAVE_BASE +  FPR_SIZE * 4 )(r1)
+	lfd	f6, (FP_SAVE_BASE +  FPR_SIZE * 5 )(r1)
+	lfd	f7, (FP_SAVE_BASE +  FPR_SIZE * 6 )(r1)
+	lfd	f8, (FP_SAVE_BASE +  FPR_SIZE * 7 )(r1)
+	lfd	f9, (FP_SAVE_BASE +  FPR_SIZE * 8 )(r1)
+	lfd	f10,(FP_SAVE_BASE +  FPR_SIZE * 9 )(r1)
+	lfd	f11,(FP_SAVE_BASE +  FPR_SIZE * 10)(r1)
+	lfd	f12,(FP_SAVE_BASE +  FPR_SIZE * 11)(r1)
+	lfd	f13,(FP_SAVE_BASE +  FPR_SIZE * 12)(r1)
+
+	/* point back at our saved struct.  */
+Lstructints:
+	addi	r11,r1,(SAVE_SIZE-RESULT_BYTES)
+	lg	r3,0(r11)			; we end up picking the
+	lg	r4,8(r11)			; first two again.
+	lg	r5,16(r11)
+	lg	r6,24(r11)
+	lg	r7,32(r11)
+	lg	r8,40(r11)
+	lg	r9,48(r11)
+	lg	r10,56(r11)
+#endif
 
 /* case done  */
 Lfinish:
-	addi	r1,r1,176	/* Restore stack pointer.  */
-	lwz	r0,8(r1)	/* Get return address.  */
-	mtlr	r0		/* Reset link register.  */
+	addi	r1,r1,SAVE_SIZE		/* Restore stack pointer.  */
+	lg	r0,SAVED_LR_OFFSET(r1)	/* Get return address.  */
+	mtlr	r0			/* Reset link register.  */
 	blr
-
+Lendcode:
+	.align 1
+	
 /* END(ffi_closure_ASM)  */
 
-.data
-.section __TEXT,__eh_frame,coalesced,no_toc+strip_static_syms+live_support
+/* EH frame stuff.  */
+#define EH_DATA_ALIGN_FACT MODE_CHOICE(0x7c,0x78)
+/* 176, 400 */
+#define EH_FRAME_OFFSETA MODE_CHOICE(176,0x90)
+#define EH_FRAME_OFFSETB MODE_CHOICE(1,3)
+
+	.static_data
+	.align LOG2_GPR_BYTES
+LLFB1$non_lazy_ptr:
+	.g_long Lstartcode
+
+	.section __TEXT,__eh_frame,coalesced,no_toc+strip_static_syms+live_support
 EH_frame1:
 	.set	L$set$0,LECIE1-LSCIE1
 	.long	L$set$0	; Length of Common Information Entry
@@ -255,16 +481,16 @@
 	.byte	0x1	; CIE Version
 	.ascii	"zR\0"	; CIE Augmentation
 	.byte	0x1	; uleb128 0x1; CIE Code Alignment Factor
-	.byte	0x7c	; sleb128 -4; CIE Data Alignment Factor
+	.byte	EH_DATA_ALIGN_FACT ; sleb128 -4; CIE Data Alignment Factor
 	.byte	0x41	; CIE RA Column
 	.byte	0x1	; uleb128 0x1; Augmentation size
-	.byte	0x90	; FDE Encoding (indirect pcrel)
+	.byte	0x10	; FDE Encoding (indirect pcrel)
 	.byte	0xc	; DW_CFA_def_cfa
 	.byte	0x1	; uleb128 0x1
 	.byte	0x0	; uleb128 0x0
 	.align	LOG2_GPR_BYTES
 LECIE1:
-.globl _ffi_closure_ASM.eh
+	.globl _ffi_closure_ASM.eh
 _ffi_closure_ASM.eh:
 LSFDE1:
 	.set	L$set$1,LEFDE1-LASFDE1
@@ -273,45 +499,78 @@
 LASFDE1:
 	.long	LASFDE1-EH_frame1	; FDE CIE offset
 	.g_long	LLFB1$non_lazy_ptr-.	; FDE initial location
-	.set	L$set$3,LFE1-LFB1
+	.set	L$set$3,LFE1-Lstartcode
 	.g_long	L$set$3	; FDE address range
 	.byte   0x0     ; uleb128 0x0; Augmentation size
 	.byte	0x4	; DW_CFA_advance_loc4
 	.set	L$set$3,LCFI1-LCFI0
 	.long	L$set$3
 	.byte	0xe	; DW_CFA_def_cfa_offset
-	.byte	176,1	; uleb128 176
+	.byte	EH_FRAME_OFFSETA,EH_FRAME_OFFSETB	; uleb128 176,1/190,3
 	.byte	0x4	; DW_CFA_advance_loc4
-	.set	L$set$4,LCFI0-LFB1
+	.set	L$set$4,LCFI0-Lstartcode
 	.long	L$set$4
 	.byte   0x11    ; DW_CFA_offset_extended_sf
 	.byte	0x41	; uleb128 0x41
 	.byte   0x7e    ; sleb128 -2
 	.align	LOG2_GPR_BYTES
 LEFDE1:
-.data
-	.align	LOG2_GPR_BYTES
-LDFCM0:
-.section __TEXT,__picsymbolstub1,symbol_stubs,pure_instructions,32
-	.align	LOG2_GPR_BYTES
-Lffi_closure_helper_DARWIN$stub:
-#if 1
+	.align 	1
+
+#ifdef WANT_STUB
+	.section __TEXT,__picsymbolstub1,symbol_stubs,pure_instructions,32
+	.align 5
+L_ffi_closure_helper_DARWIN$stub:
 	.indirect_symbol _ffi_closure_helper_DARWIN
-	mflr	r0
-	bcl	20,31,LO$ffi_closure_helper_DARWIN
-LO$ffi_closure_helper_DARWIN:
-	mflr	r11
-	addis	r11,r11,ha16(L_ffi_closure_helper_DARWIN$lazy_ptr - LO$ffi_closure_helper_DARWIN)
-	mtlr	r0
-	lgu	r12,lo16(L_ffi_closure_helper_DARWIN$lazy_ptr - LO$ffi_closure_helper_DARWIN)(r11)
-	mtctr	r12
+	mflr r0
+	bcl 20,31,"L00000000001$spb"
+"L00000000001$spb":
+	mflr r11
+	addis r11,r11,ha16(L_ffi_closure_helper_DARWIN$lazy_ptr-"L00000000001$spb")
+	mtlr r0
+	lwzu r12,lo16(L_ffi_closure_helper_DARWIN$lazy_ptr-"L00000000001$spb")(r11)
+	mtctr r12
 	bctr
-.lazy_symbol_pointer
+	.lazy_symbol_pointer
 L_ffi_closure_helper_DARWIN$lazy_ptr:
 	.indirect_symbol _ffi_closure_helper_DARWIN
-	.g_long dyld_stub_binding_helper
+	.g_long	dyld_stub_binding_helper
+
+#if defined(__ppc64__)
+	.section __TEXT,__picsymbolstub1,symbol_stubs,pure_instructions,32
+	.align 5
+L_darwin64_struct_ret_by_value_p$stub:
+	.indirect_symbol _darwin64_struct_ret_by_value_p
+	mflr r0
+	bcl 20,31,"L00000000002$spb"
+"L00000000002$spb":
+	mflr r11
+	addis r11,r11,ha16(L_darwin64_struct_ret_by_value_p$lazy_ptr-"L00000000002$spb")
+	mtlr r0
+	lwzu r12,lo16(L_darwin64_struct_ret_by_value_p$lazy_ptr-"L00000000002$spb")(r11)
+	mtctr r12
+	bctr
+	.lazy_symbol_pointer
+L_darwin64_struct_ret_by_value_p$lazy_ptr:
+	.indirect_symbol _darwin64_struct_ret_by_value_p
+	.g_long	dyld_stub_binding_helper
+
+	.section __TEXT,__picsymbolstub1,symbol_stubs,pure_instructions,32
+	.align 5
+L_darwin64_pass_struct_floats$stub:
+	.indirect_symbol _darwin64_pass_struct_floats
+	mflr r0
+	bcl 20,31,"L00000000003$spb"
+"L00000000003$spb":
+	mflr r11
+	addis r11,r11,ha16(L_darwin64_pass_struct_floats$lazy_ptr-"L00000000003$spb")
+	mtlr r0
+	lwzu r12,lo16(L_darwin64_pass_struct_floats$lazy_ptr-"L00000000003$spb")(r11)
+	mtctr r12
+	bctr
+	.lazy_symbol_pointer
+L_darwin64_pass_struct_floats$lazy_ptr:
+	.indirect_symbol _darwin64_pass_struct_floats
+	.g_long	dyld_stub_binding_helper
+#  endif
 #endif
-.data
-	.align LOG2_GPR_BYTES
-LLFB1$non_lazy_ptr:
-	.g_long LFB1
diff --git a/Modules/_ctypes/libffi/src/powerpc/ffi.c b/Modules/_ctypes/libffi/src/powerpc/ffi.c
index 75784a9..54f2731 100644
--- a/Modules/_ctypes/libffi/src/powerpc/ffi.c
+++ b/Modules/_ctypes/libffi/src/powerpc/ffi.c
@@ -1,7 +1,9 @@
 /* -----------------------------------------------------------------------
-   ffi.c - Copyright (c) 1998 Geoffrey Keating
-   Copyright (C) 2007, 2008 Free Software Foundation, Inc
-   Copyright (C) 2008 Red Hat, Inc
+   ffi.c - Copyright (C) 2011 Anthony Green
+           Copyright (C) 2011 Kyle Moffett
+           Copyright (C) 2008 Red Hat, Inc
+           Copyright (C) 2007, 2008 Free Software Foundation, Inc
+	   Copyright (c) 1998 Geoffrey Keating
 
    PowerPC Foreign Function Interface
 
@@ -39,32 +41,33 @@
   /* The assembly depends on these exact flags.  */
   FLAG_RETURNS_SMST	= 1 << (31-31), /* Used for FFI_SYSV small structs.  */
   FLAG_RETURNS_NOTHING  = 1 << (31-30), /* These go in cr7 */
+#ifndef __NO_FPRS__
   FLAG_RETURNS_FP       = 1 << (31-29),
+#endif
   FLAG_RETURNS_64BITS   = 1 << (31-28),
 
   FLAG_RETURNS_128BITS  = 1 << (31-27), /* cr6  */
+
   FLAG_SYSV_SMST_R4     = 1 << (31-26), /* use r4 for FFI_SYSV 8 byte
 					   structs.  */
   FLAG_SYSV_SMST_R3     = 1 << (31-25), /* use r3 for FFI_SYSV 4 byte
 					   structs.  */
-  /* Bits (31-24) through (31-19) store shift value for SMST */
 
   FLAG_ARG_NEEDS_COPY   = 1 << (31- 7),
+#ifndef __NO_FPRS__
   FLAG_FP_ARGUMENTS     = 1 << (31- 6), /* cr1.eq; specified by ABI */
+#endif
   FLAG_4_GPR_ARGUMENTS  = 1 << (31- 5),
   FLAG_RETVAL_REFERENCE = 1 << (31- 4)
 };
 
 /* About the SYSV ABI.  */
-unsigned int NUM_GPR_ARG_REGISTERS = 8;
+#define ASM_NEEDS_REGISTERS 4
+#define NUM_GPR_ARG_REGISTERS 8
 #ifndef __NO_FPRS__
-unsigned int NUM_FPR_ARG_REGISTERS = 8;
-#else
-unsigned int NUM_FPR_ARG_REGISTERS = 0;
+# define NUM_FPR_ARG_REGISTERS 8
 #endif
 
-enum { ASM_NEEDS_REGISTERS = 4 };
-
 /* ffi_prep_args_SYSV is called by the assembly routine once stack space
    has been allocated for the function's arguments.
 
@@ -113,10 +116,12 @@
   valp gpr_base;
   int intarg_count;
 
+#ifndef __NO_FPRS__
   /* 'fpr_base' points at the space for fpr1, and grows upwards as
      we use FPR registers.  */
   valp fpr_base;
   int fparg_count;
+#endif
 
   /* 'copy_space' grows down as we put structures in it.  It should
      stay 16-byte aligned.  */
@@ -125,9 +130,8 @@
   /* 'next_arg' grows up as we put parameters in it.  */
   valp next_arg;
 
-  int i, ii MAYBE_UNUSED;
+  int i;
   ffi_type **ptr;
-  double double_tmp;
   union {
     void **v;
     char **c;
@@ -143,21 +147,23 @@
   size_t struct_copy_size;
   unsigned gprvalue;
 
-  if (ecif->cif->abi == FFI_LINUX_SOFT_FLOAT)
-    NUM_FPR_ARG_REGISTERS = 0;
-
   stacktop.c = (char *) stack + bytes;
   gpr_base.u = stacktop.u - ASM_NEEDS_REGISTERS - NUM_GPR_ARG_REGISTERS;
   intarg_count = 0;
+#ifndef __NO_FPRS__
+  double double_tmp;
   fpr_base.d = gpr_base.d - NUM_FPR_ARG_REGISTERS;
   fparg_count = 0;
   copy_space.c = ((flags & FLAG_FP_ARGUMENTS) ? fpr_base.c : gpr_base.c);
+#else
+  copy_space.c = gpr_base.c;
+#endif
   next_arg.u = stack + 2;
 
   /* Check that everything starts aligned properly.  */
-  FFI_ASSERT (((unsigned) (char *) stack & 0xF) == 0);
-  FFI_ASSERT (((unsigned) copy_space.c & 0xF) == 0);
-  FFI_ASSERT (((unsigned) stacktop.c & 0xF) == 0);
+  FFI_ASSERT (((unsigned long) (char *) stack & 0xF) == 0);
+  FFI_ASSERT (((unsigned long) copy_space.c & 0xF) == 0);
+  FFI_ASSERT (((unsigned long) stacktop.c & 0xF) == 0);
   FFI_ASSERT ((bytes & 0xF) == 0);
   FFI_ASSERT (copy_space.c >= next_arg.c);
 
@@ -174,12 +180,28 @@
        i > 0;
        i--, ptr++, p_argv.v++)
     {
-      switch ((*ptr)->type)
-	{
+      unsigned short typenum = (*ptr)->type;
+
+      /* We may need to handle some values depending on ABI */
+      if (ecif->cif->abi == FFI_LINUX_SOFT_FLOAT) {
+		if (typenum == FFI_TYPE_FLOAT)
+			typenum = FFI_TYPE_UINT32;
+		if (typenum == FFI_TYPE_DOUBLE)
+			typenum = FFI_TYPE_UINT64;
+		if (typenum == FFI_TYPE_LONGDOUBLE)
+			typenum = FFI_TYPE_UINT128;
+      } else if (ecif->cif->abi != FFI_LINUX) {
+#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
+		if (typenum == FFI_TYPE_LONGDOUBLE)
+			typenum = FFI_TYPE_STRUCT;
+#endif
+      }
+
+      /* Now test the translated value */
+      switch (typenum) {
+#ifndef __NO_FPRS__
 	case FFI_TYPE_FLOAT:
 	  /* With FFI_LINUX_SOFT_FLOAT floats are handled like UINT32.  */
-	  if (ecif->cif->abi == FFI_LINUX_SOFT_FLOAT)
-	    goto soft_float_prep;
 	  double_tmp = **p_argv.f;
 	  if (fparg_count >= NUM_FPR_ARG_REGISTERS)
 	    {
@@ -195,8 +217,6 @@
 
 	case FFI_TYPE_DOUBLE:
 	  /* With FFI_LINUX_SOFT_FLOAT doubles are handled like UINT64.  */
-	  if (ecif->cif->abi == FFI_LINUX_SOFT_FLOAT)
-	    goto soft_double_prep;
 	  double_tmp = **p_argv.d;
 
 	  if (fparg_count >= NUM_FPR_ARG_REGISTERS)
@@ -218,43 +238,6 @@
 
 #if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
 	case FFI_TYPE_LONGDOUBLE:
-	  if ((ecif->cif->abi != FFI_LINUX)
-		&& (ecif->cif->abi != FFI_LINUX_SOFT_FLOAT))
-	    goto do_struct;
-	  /* The soft float ABI for long doubles works like this,
-	     a long double is passed in four consecutive gprs if available.
-	     A maximum of 2 long doubles can be passed in gprs.
-	     If we do not have 4 gprs left, the long double is passed on the
-	     stack, 4-byte aligned.  */
-	  if (ecif->cif->abi == FFI_LINUX_SOFT_FLOAT)
-	    {
-	      unsigned int int_tmp = (*p_argv.ui)[0];
-	      if (intarg_count >= NUM_GPR_ARG_REGISTERS - 3)
-		{
-		  if (intarg_count < NUM_GPR_ARG_REGISTERS)
-		    intarg_count += NUM_GPR_ARG_REGISTERS - intarg_count;
-		  *next_arg.u = int_tmp;
-		  next_arg.u++;
-		  for (ii = 1; ii < 4; ii++)
-		    {
-		      int_tmp = (*p_argv.ui)[ii];
-		      *next_arg.u = int_tmp;
-		      next_arg.u++;
-		    }
-		}
-	      else
-		{
-		  *gpr_base.u++ = int_tmp;
-		  for (ii = 1; ii < 4; ii++)
-		    {
-		      int_tmp = (*p_argv.ui)[ii];
-		      *gpr_base.u++ = int_tmp;
-		    }
-		}
-	      intarg_count +=4;
-	    }
-	  else
-	    {
 	      double_tmp = (*p_argv.d)[0];
 
 	      if (fparg_count >= NUM_FPR_ARG_REGISTERS - 1)
@@ -280,13 +263,40 @@
 
 	      fparg_count += 2;
 	      FFI_ASSERT (flags & FLAG_FP_ARGUMENTS);
-	    }
 	  break;
 #endif
+#endif /* have FPRs */
+
+	/*
+	 * The soft float ABI for long doubles works like this, a long double
+	 * is passed in four consecutive GPRs if available.  A maximum of 2
+	 * long doubles can be passed in gprs.  If we do not have 4 GPRs
+	 * left, the long double is passed on the stack, 4-byte aligned.
+	 */
+	case FFI_TYPE_UINT128: {
+		unsigned int int_tmp = (*p_argv.ui)[0];
+		unsigned int ii;
+		if (intarg_count >= NUM_GPR_ARG_REGISTERS - 3) {
+			if (intarg_count < NUM_GPR_ARG_REGISTERS)
+				intarg_count += NUM_GPR_ARG_REGISTERS - intarg_count;
+			*(next_arg.u++) = int_tmp;
+			for (ii = 1; ii < 4; ii++) {
+				int_tmp = (*p_argv.ui)[ii];
+				*(next_arg.u++) = int_tmp;
+			}
+		} else {
+			*(gpr_base.u++) = int_tmp;
+			for (ii = 1; ii < 4; ii++) {
+				int_tmp = (*p_argv.ui)[ii];
+				*(gpr_base.u++) = int_tmp;
+			}
+		}
+		intarg_count += 4;
+		break;
+	}
 
 	case FFI_TYPE_UINT64:
 	case FFI_TYPE_SINT64:
-	soft_double_prep:
 	  if (intarg_count == NUM_GPR_ARG_REGISTERS-1)
 	    intarg_count++;
 	  if (intarg_count >= NUM_GPR_ARG_REGISTERS)
@@ -319,9 +329,6 @@
 	  break;
 
 	case FFI_TYPE_STRUCT:
-#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
-	do_struct:
-#endif
 	  struct_copy_size = ((*ptr)->size + 15) & ~0xF;
 	  copy_space.c -= struct_copy_size;
 	  memcpy (copy_space.c, *p_argv.c, (*ptr)->size);
@@ -349,7 +356,6 @@
 	case FFI_TYPE_UINT32:
 	case FFI_TYPE_SINT32:
 	case FFI_TYPE_POINTER:
-	soft_float_prep:
 
 	  gprvalue = **p_argv.ui;
 
@@ -366,8 +372,16 @@
   /* Check that we didn't overrun the stack...  */
   FFI_ASSERT (copy_space.c >= next_arg.c);
   FFI_ASSERT (gpr_base.u <= stacktop.u - ASM_NEEDS_REGISTERS);
+  /* The assert below is testing that the number of integer arguments agrees
+     with the number found in ffi_prep_cif_machdep().  However, intarg_count
+     is incremeneted whenever we place an FP arg on the stack, so account for
+     that before our assert test.  */
+#ifndef __NO_FPRS__
+  if (fparg_count > NUM_FPR_ARG_REGISTERS)
+    intarg_count -= fparg_count - NUM_FPR_ARG_REGISTERS;
   FFI_ASSERT (fpr_base.u
 	      <= stacktop.u - ASM_NEEDS_REGISTERS - NUM_GPR_ARG_REGISTERS);
+#endif
   FFI_ASSERT (flags & FLAG_4_GPR_ARGUMENTS || intarg_count <= 4);
 }
 
@@ -604,9 +618,6 @@
   unsigned type = cif->rtype->type;
   unsigned size = cif->rtype->size;
 
-  if (cif->abi == FFI_LINUX_SOFT_FLOAT)
-    NUM_FPR_ARG_REGISTERS = 0;
-
   if (cif->abi != FFI_LINUX64)
     {
       /* All the machine-independent calculation of cif->bytes will be wrong.
@@ -646,13 +657,26 @@
      - Single/double FP values in fpr1, long double in fpr1,fpr2.
      - soft-float float/doubles are treated as UINT32/UINT64 respectivley.
      - soft-float long doubles are returned in gpr3-gpr6.  */
+  /* First translate for softfloat/nonlinux */
+  if (cif->abi == FFI_LINUX_SOFT_FLOAT) {
+	if (type == FFI_TYPE_FLOAT)
+		type = FFI_TYPE_UINT32;
+	if (type == FFI_TYPE_DOUBLE)
+		type = FFI_TYPE_UINT64;
+	if (type == FFI_TYPE_LONGDOUBLE)
+		type = FFI_TYPE_UINT128;
+  } else if (cif->abi != FFI_LINUX && cif->abi != FFI_LINUX64) {
+#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
+	if (type == FFI_TYPE_LONGDOUBLE)
+		type = FFI_TYPE_STRUCT;
+#endif
+  }
+
   switch (type)
     {
+#ifndef __NO_FPRS__
 #if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
     case FFI_TYPE_LONGDOUBLE:
-      if (cif->abi != FFI_LINUX && cif->abi != FFI_LINUX64
-	&& cif->abi != FFI_LINUX_SOFT_FLOAT)
-	goto byref;
       flags |= FLAG_RETURNS_128BITS;
       /* Fall through.  */
 #endif
@@ -660,11 +684,13 @@
       flags |= FLAG_RETURNS_64BITS;
       /* Fall through.  */
     case FFI_TYPE_FLOAT:
-      /* With FFI_LINUX_SOFT_FLOAT no fp registers are used.  */
-      if (cif->abi != FFI_LINUX_SOFT_FLOAT)
-	flags |= FLAG_RETURNS_FP;
+      flags |= FLAG_RETURNS_FP;
       break;
+#endif
 
+    case FFI_TYPE_UINT128:
+      flags |= FLAG_RETURNS_128BITS;
+      /* Fall through.  */
     case FFI_TYPE_UINT64:
     case FFI_TYPE_SINT64:
       flags |= FLAG_RETURNS_64BITS;
@@ -699,9 +725,7 @@
 		}
 	    }
 	}
-#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
-    byref:
-#endif
+
       intarg_count++;
       flags |= FLAG_RETVAL_REFERENCE;
       /* Fall through.  */
@@ -722,39 +746,36 @@
        Stuff on the stack needs to keep proper alignment.  */
     for (ptr = cif->arg_types, i = cif->nargs; i > 0; i--, ptr++)
       {
-	switch ((*ptr)->type)
-	  {
+	unsigned short typenum = (*ptr)->type;
+
+	/* We may need to handle some values depending on ABI */
+	if (cif->abi == FFI_LINUX_SOFT_FLOAT) {
+		if (typenum == FFI_TYPE_FLOAT)
+			typenum = FFI_TYPE_UINT32;
+		if (typenum == FFI_TYPE_DOUBLE)
+			typenum = FFI_TYPE_UINT64;
+		if (typenum == FFI_TYPE_LONGDOUBLE)
+			typenum = FFI_TYPE_UINT128;
+	} else if (cif->abi != FFI_LINUX && cif->abi != FFI_LINUX64) {
+#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
+		if (typenum == FFI_TYPE_LONGDOUBLE)
+			typenum = FFI_TYPE_STRUCT;
+#endif
+	}
+
+	switch (typenum) {
+#ifndef __NO_FPRS__
 	  case FFI_TYPE_FLOAT:
-	    /* With FFI_LINUX_SOFT_FLOAT floats are handled like UINT32.  */
-	    if (cif->abi == FFI_LINUX_SOFT_FLOAT)
-	      goto soft_float_cif;
 	    fparg_count++;
 	    /* floating singles are not 8-aligned on stack */
 	    break;
 
 #if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
 	  case FFI_TYPE_LONGDOUBLE:
-	    if (cif->abi != FFI_LINUX && cif->abi != FFI_LINUX_SOFT_FLOAT)
-	      goto do_struct;
-	    if (cif->abi == FFI_LINUX_SOFT_FLOAT)
-	      {
-		if (intarg_count >= NUM_GPR_ARG_REGISTERS - 3
-		  || intarg_count < NUM_GPR_ARG_REGISTERS)
-		  /* A long double in FFI_LINUX_SOFT_FLOAT can use only
-		     a set of four consecutive gprs. If we have not enough,
-		     we have to adjust the intarg_count value.  */
-		  intarg_count += NUM_GPR_ARG_REGISTERS - intarg_count;
-		intarg_count += 4;
-		break;
-	      }
-	    else
-	      fparg_count++;
+	    fparg_count++;
 	    /* Fall thru */
 #endif
 	  case FFI_TYPE_DOUBLE:
-	    /* With FFI_LINUX_SOFT_FLOAT doubles are handled like UINT64.  */
-	    if (cif->abi == FFI_LINUX_SOFT_FLOAT)
-	      goto soft_double_cif;
 	    fparg_count++;
 	    /* If this FP arg is going on the stack, it must be
 	       8-byte-aligned.  */
@@ -763,10 +784,21 @@
 		&& intarg_count % 2 != 0)
 	      intarg_count++;
 	    break;
+#endif
+	  case FFI_TYPE_UINT128:
+		/*
+		 * A long double in FFI_LINUX_SOFT_FLOAT can use only a set
+		 * of four consecutive gprs. If we do not have enough, we
+		 * have to adjust the intarg_count value.
+		 */
+		if (intarg_count >= NUM_GPR_ARG_REGISTERS - 3
+				&& intarg_count < NUM_GPR_ARG_REGISTERS)
+			intarg_count = NUM_GPR_ARG_REGISTERS;
+		intarg_count += 4;
+		break;
 
 	  case FFI_TYPE_UINT64:
 	  case FFI_TYPE_SINT64:
-	  soft_double_cif:
 	    /* 'long long' arguments are passed as two words, but
 	       either both words must fit in registers or both go
 	       on the stack.  If they go on the stack, they must
@@ -783,9 +815,6 @@
 	    break;
 
 	  case FFI_TYPE_STRUCT:
-#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
-	  do_struct:
-#endif
 	    /* We must allocate space for a copy of these to enforce
 	       pass-by-value.  Pad the space up to a multiple of 16
 	       bytes (the maximum alignment required for anything under
@@ -793,12 +822,20 @@
 	    struct_copy_size += ((*ptr)->size + 15) & ~0xF;
 	    /* Fall through (allocate space for the pointer).  */
 
-	  default:
-	  soft_float_cif:
+	  case FFI_TYPE_POINTER:
+	  case FFI_TYPE_INT:
+	  case FFI_TYPE_UINT32:
+	  case FFI_TYPE_SINT32:
+	  case FFI_TYPE_UINT16:
+	  case FFI_TYPE_SINT16:
+	  case FFI_TYPE_UINT8:
+	  case FFI_TYPE_SINT8:
 	    /* Everything else is passed as a 4-byte word in a GPR, either
 	       the object itself or a pointer to it.  */
 	    intarg_count++;
 	    break;
+	  default:
+		FFI_ASSERT (0);
 	  }
       }
   else
@@ -827,16 +864,29 @@
 	    intarg_count += ((*ptr)->size + 7) / 8;
 	    break;
 
-	  default:
+	  case FFI_TYPE_POINTER:
+	  case FFI_TYPE_UINT64:
+	  case FFI_TYPE_SINT64:
+	  case FFI_TYPE_INT:
+	  case FFI_TYPE_UINT32:
+	  case FFI_TYPE_SINT32:
+	  case FFI_TYPE_UINT16:
+	  case FFI_TYPE_SINT16:
+	  case FFI_TYPE_UINT8:
+	  case FFI_TYPE_SINT8:
 	    /* Everything else is passed as a 8-byte word in a GPR, either
 	       the object itself or a pointer to it.  */
 	    intarg_count++;
 	    break;
+	  default:
+		FFI_ASSERT (0);
 	  }
       }
 
+#ifndef __NO_FPRS__
   if (fparg_count != 0)
     flags |= FLAG_FP_ARGUMENTS;
+#endif
   if (intarg_count > 4)
     flags |= FLAG_4_GPR_ARGUMENTS;
   if (struct_copy_size != 0)
@@ -844,21 +894,27 @@
 
   if (cif->abi != FFI_LINUX64)
     {
+#ifndef __NO_FPRS__
       /* Space for the FPR registers, if needed.  */
       if (fparg_count != 0)
 	bytes += NUM_FPR_ARG_REGISTERS * sizeof (double);
+#endif
 
       /* Stack space.  */
       if (intarg_count > NUM_GPR_ARG_REGISTERS)
 	bytes += (intarg_count - NUM_GPR_ARG_REGISTERS) * sizeof (int);
+#ifndef __NO_FPRS__
       if (fparg_count > NUM_FPR_ARG_REGISTERS)
 	bytes += (fparg_count - NUM_FPR_ARG_REGISTERS) * sizeof (double);
+#endif
     }
   else
     {
+#ifndef __NO_FPRS__
       /* Space for the FPR registers, if needed.  */
       if (fparg_count != 0)
 	bytes += NUM_FPR_ARG_REGISTERS64 * sizeof (double);
+#endif
 
       /* Stack space.  */
       if (intarg_count > NUM_GPR_ARG_REGISTERS64)
@@ -886,28 +942,41 @@
 void
 ffi_call(ffi_cif *cif, void (*fn)(void), void *rvalue, void **avalue)
 {
+  /*
+   * The final SYSV ABI says that structures smaller or equal 8 bytes
+   * are returned in r3/r4. The FFI_GCC_SYSV ABI instead returns them
+   * in memory.
+   *
+   * Just to keep things simple for the assembly code, we will always
+   * bounce-buffer struct return values less than or equal to 8 bytes.
+   * This allows the ASM to handle SYSV small structures by directly
+   * writing r3 and r4 to memory without worrying about struct size.
+   */
+  unsigned int smst_buffer[2];
   extended_cif ecif;
+  unsigned int rsize = 0;
 
   ecif.cif = cif;
   ecif.avalue = avalue;
 
-  /* If the return value is a struct and we don't have a return	*/
-  /* value address then we need to make one		        */
-
-  if ((rvalue == NULL) && (cif->rtype->type == FFI_TYPE_STRUCT))
-    {
-      ecif.rvalue = alloca(cif->rtype->size);
-    }
-  else
-    ecif.rvalue = rvalue;
-
+  /* Ensure that we have a valid struct return value */
+  ecif.rvalue = rvalue;
+  if (cif->rtype->type == FFI_TYPE_STRUCT) {
+    rsize = cif->rtype->size;
+    if (rsize <= 8)
+      ecif.rvalue = smst_buffer;
+    else if (!rvalue)
+      ecif.rvalue = alloca(rsize);
+  }
 
   switch (cif->abi)
     {
 #ifndef POWERPC64
+# ifndef __NO_FPRS__
     case FFI_SYSV:
     case FFI_GCC_SYSV:
     case FFI_LINUX:
+# endif
     case FFI_LINUX_SOFT_FLOAT:
       ffi_call_SYSV (&ecif, -cif->bytes, cif->flags, ecif.rvalue, fn);
       break;
@@ -920,6 +989,10 @@
       FFI_ASSERT (0);
       break;
     }
+
+  /* Check for a bounce-buffered return value */
+  if (rvalue && ecif.rvalue == smst_buffer)
+    memcpy(rvalue, smst_buffer, rsize);
 }
 
 
@@ -949,14 +1022,19 @@
 #ifdef POWERPC64
   void **tramp = (void **) &closure->tramp[0];
 
-  FFI_ASSERT (cif->abi == FFI_LINUX64);
+  if (cif->abi != FFI_LINUX64)
+    return FFI_BAD_ABI;
   /* Copy function address and TOC from ffi_closure_LINUX64.  */
   memcpy (tramp, (char *) ffi_closure_LINUX64, 16);
   tramp[2] = codeloc;
 #else
   unsigned int *tramp;
 
-  FFI_ASSERT (cif->abi == FFI_GCC_SYSV || cif->abi == FFI_SYSV);
+  if (! (cif->abi == FFI_GCC_SYSV 
+	 || cif->abi == FFI_SYSV
+	 || cif->abi == FFI_LINUX
+	 || cif->abi == FFI_LINUX_SOFT_FLOAT))
+    return FFI_BAD_ABI;
 
   tramp = (unsigned int *) &closure->tramp[0];
   tramp[0] = 0x7c0802a6;  /*   mflr    r0 */
@@ -1011,32 +1089,38 @@
   void **          avalue;
   ffi_type **      arg_types;
   long             i, avn;
-  long             nf;   /* number of floating registers already used */
-  long             ng;   /* number of general registers already used */
-  ffi_cif *        cif;
-  double           temp;
-  unsigned         size;
+#ifndef __NO_FPRS__
+  long             nf = 0;   /* number of floating registers already used */
+#endif
+  long             ng = 0;   /* number of general registers already used */
 
-  cif = closure->cif;
+  ffi_cif *cif = closure->cif;
+  unsigned       size     = cif->rtype->size;
+  unsigned short rtypenum = cif->rtype->type;
+
   avalue = alloca (cif->nargs * sizeof (void *));
-  size = cif->rtype->size;
 
-  nf = 0;
-  ng = 0;
+  /* First translate for softfloat/nonlinux */
+  if (cif->abi == FFI_LINUX_SOFT_FLOAT) {
+	if (rtypenum == FFI_TYPE_FLOAT)
+		rtypenum = FFI_TYPE_UINT32;
+	if (rtypenum == FFI_TYPE_DOUBLE)
+		rtypenum = FFI_TYPE_UINT64;
+	if (rtypenum == FFI_TYPE_LONGDOUBLE)
+		rtypenum = FFI_TYPE_UINT128;
+  } else if (cif->abi != FFI_LINUX && cif->abi != FFI_LINUX64) {
+#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
+	if (rtypenum == FFI_TYPE_LONGDOUBLE)
+		rtypenum = FFI_TYPE_STRUCT;
+#endif
+  }
+
 
   /* Copy the caller's structure return value address so that the closure
      returns the data directly to the caller.
      For FFI_SYSV the result is passed in r3/r4 if the struct size is less
      or equal 8 bytes.  */
-
-  if ((cif->rtype->type == FFI_TYPE_STRUCT
-       && !((cif->abi == FFI_SYSV) && (size <= 8)))
-#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
-      || (cif->rtype->type == FFI_TYPE_LONGDOUBLE
-	  && cif->abi != FFI_LINUX && cif->abi != FFI_LINUX_SOFT_FLOAT)
-#endif
-      )
-    {
+  if (rtypenum == FFI_TYPE_STRUCT && ((cif->abi != FFI_SYSV) || (size > 8))) {
       rvalue = (void *) *pgr;
       ng++;
       pgr++;
@@ -1047,10 +1131,109 @@
   arg_types = cif->arg_types;
 
   /* Grab the addresses of the arguments from the stack frame.  */
-  while (i < avn)
-    {
-      switch (arg_types[i]->type)
-	{
+  while (i < avn) {
+      unsigned short typenum = arg_types[i]->type;
+
+      /* We may need to handle some values depending on ABI */
+      if (cif->abi == FFI_LINUX_SOFT_FLOAT) {
+		if (typenum == FFI_TYPE_FLOAT)
+			typenum = FFI_TYPE_UINT32;
+		if (typenum == FFI_TYPE_DOUBLE)
+			typenum = FFI_TYPE_UINT64;
+		if (typenum == FFI_TYPE_LONGDOUBLE)
+			typenum = FFI_TYPE_UINT128;
+      } else if (cif->abi != FFI_LINUX && cif->abi != FFI_LINUX64) {
+#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
+		if (typenum == FFI_TYPE_LONGDOUBLE)
+			typenum = FFI_TYPE_STRUCT;
+#endif
+      }
+
+      switch (typenum) {
+#ifndef __NO_FPRS__
+	case FFI_TYPE_FLOAT:
+	  /* unfortunately float values are stored as doubles
+	   * in the ffi_closure_SYSV code (since we don't check
+	   * the type in that routine).
+	   */
+
+	  /* there are 8 64bit floating point registers */
+
+	  if (nf < 8)
+	    {
+	      double temp = pfr->d;
+	      pfr->f = (float) temp;
+	      avalue[i] = pfr;
+	      nf++;
+	      pfr++;
+	    }
+	  else
+	    {
+	      /* FIXME? here we are really changing the values
+	       * stored in the original calling routines outgoing
+	       * parameter stack.  This is probably a really
+	       * naughty thing to do but...
+	       */
+	      avalue[i] = pst;
+	      pst += 1;
+	    }
+	  break;
+
+	case FFI_TYPE_DOUBLE:
+	  /* On the outgoing stack all values are aligned to 8 */
+	  /* there are 8 64bit floating point registers */
+
+	  if (nf < 8)
+	    {
+	      avalue[i] = pfr;
+	      nf++;
+	      pfr++;
+	    }
+	  else
+	    {
+	      if (((long) pst) & 4)
+		pst++;
+	      avalue[i] = pst;
+	      pst += 2;
+	    }
+	  break;
+
+#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
+	case FFI_TYPE_LONGDOUBLE:
+	  if (nf < 7)
+	    {
+	      avalue[i] = pfr;
+	      pfr += 2;
+	      nf += 2;
+	    }
+	  else
+	    {
+	      if (((long) pst) & 4)
+		pst++;
+	      avalue[i] = pst;
+	      pst += 4;
+	      nf = 8;
+	    }
+	  break;
+#endif
+#endif /* have FPRS */
+
+	case FFI_TYPE_UINT128:
+		/*
+		 * Test if for the whole long double, 4 gprs are available.
+		 * otherwise the stuff ends up on the stack.
+		 */
+		if (ng < 5) {
+			avalue[i] = pgr;
+			pgr += 4;
+			ng += 4;
+		} else {
+			avalue[i] = pst;
+			pst += 4;
+			ng = 8+4;
+		}
+		break;
+
 	case FFI_TYPE_SINT8:
 	case FFI_TYPE_UINT8:
 	  /* there are 8 gpr registers used to pass values */
@@ -1086,7 +1269,6 @@
 	case FFI_TYPE_SINT32:
 	case FFI_TYPE_UINT32:
 	case FFI_TYPE_POINTER:
-	soft_float_closure:
 	  /* there are 8 gpr registers used to pass values */
 	  if (ng < 8)
 	    {
@@ -1102,9 +1284,6 @@
 	  break;
 
 	case FFI_TYPE_STRUCT:
-#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
-	do_struct:
-#endif
 	  /* Structs are passed by reference. The address will appear in a
 	     gpr if it is one of the first 8 arguments.  */
 	  if (ng < 8)
@@ -1122,7 +1301,6 @@
 
 	case FFI_TYPE_SINT64:
 	case FFI_TYPE_UINT64:
-	soft_double_closure:
 	  /* passing long long ints are complex, they must
 	   * be passed in suitable register pairs such as
 	   * (r3,r4) or (r5,r6) or (r6,r7), or (r7,r8) or (r9,r10)
@@ -1154,99 +1332,8 @@
 	    }
 	  break;
 
-	case FFI_TYPE_FLOAT:
-	  /* With FFI_LINUX_SOFT_FLOAT floats are handled like UINT32.  */
-	  if (cif->abi == FFI_LINUX_SOFT_FLOAT)
-	    goto soft_float_closure;
-	  /* unfortunately float values are stored as doubles
-	   * in the ffi_closure_SYSV code (since we don't check
-	   * the type in that routine).
-	   */
-
-	  /* there are 8 64bit floating point registers */
-
-	  if (nf < 8)
-	    {
-	      temp = pfr->d;
-	      pfr->f = (float) temp;
-	      avalue[i] = pfr;
-	      nf++;
-	      pfr++;
-	    }
-	  else
-	    {
-	      /* FIXME? here we are really changing the values
-	       * stored in the original calling routines outgoing
-	       * parameter stack.  This is probably a really
-	       * naughty thing to do but...
-	       */
-	      avalue[i] = pst;
-	      pst += 1;
-	    }
-	  break;
-
-	case FFI_TYPE_DOUBLE:
-	  /* With FFI_LINUX_SOFT_FLOAT doubles are handled like UINT64.  */
-	  if (cif->abi == FFI_LINUX_SOFT_FLOAT)
-	    goto soft_double_closure;
-	  /* On the outgoing stack all values are aligned to 8 */
-	  /* there are 8 64bit floating point registers */
-
-	  if (nf < 8)
-	    {
-	      avalue[i] = pfr;
-	      nf++;
-	      pfr++;
-	    }
-	  else
-	    {
-	      if (((long) pst) & 4)
-		pst++;
-	      avalue[i] = pst;
-	      pst += 2;
-	    }
-	  break;
-
-#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
-	case FFI_TYPE_LONGDOUBLE:
-	  if (cif->abi != FFI_LINUX && cif->abi != FFI_LINUX_SOFT_FLOAT)
-	    goto do_struct;
-	  if (cif->abi == FFI_LINUX_SOFT_FLOAT)
-	    { /* Test if for the whole long double, 4 gprs are available.
-		 otherwise the stuff ends up on the stack.  */
-	      if (ng < 5)
-		{
-		  avalue[i] = pgr;
-		  pgr += 4;
-		  ng += 4;
-		}
-	      else
-		{
-		  avalue[i] = pst;
-		  pst += 4;
-		  ng = 8;
-		}
-	      break;
-	    }
-	  if (nf < 7)
-	    {
-	      avalue[i] = pfr;
-	      pfr += 2;
-	      nf += 2;
-	    }
-	  else
-	    {
-	      if (((long) pst) & 4)
-		pst++;
-	      avalue[i] = pst;
-	      pst += 4;
-	      nf = 8;
-	    }
-	  break;
-#endif
-
 	default:
-	  FFI_ASSERT (0);
+		FFI_ASSERT (0);
 	}
 
       i++;
@@ -1263,39 +1350,9 @@
      already used and we never have a struct with size zero. That is the reason
      for the subtraction of 1. See the comment in ffitarget.h about ordering.
   */
-  if (cif->abi == FFI_SYSV && cif->rtype->type == FFI_TYPE_STRUCT
-      && size <= 8)
+  if (cif->abi == FFI_SYSV && rtypenum == FFI_TYPE_STRUCT && size <= 8)
     return (FFI_SYSV_TYPE_SMALL_STRUCT - 1) + size;
-#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
-  else if (cif->rtype->type == FFI_TYPE_LONGDOUBLE
-	   && cif->abi != FFI_LINUX && cif->abi != FFI_LINUX_SOFT_FLOAT)
-    return FFI_TYPE_STRUCT;
-#endif
-  /* With FFI_LINUX_SOFT_FLOAT floats and doubles are handled like UINT32
-     respectivley UINT64.  */
-  if (cif->abi == FFI_LINUX_SOFT_FLOAT)
-    {
-      switch (cif->rtype->type)
-	{
-	case FFI_TYPE_FLOAT:
-	  return FFI_TYPE_UINT32;
-	  break;
-	case FFI_TYPE_DOUBLE:
-	  return FFI_TYPE_UINT64;
-	  break;
-#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
-	case FFI_TYPE_LONGDOUBLE:
-	  return FFI_TYPE_UINT128;
-	  break;
-#endif
-	default:
-	  return cif->rtype->type;
-	}
-    }
-  else
-    {
-      return cif->rtype->type;
-    }
+  return rtypenum;
 }
 
 int FFI_HIDDEN ffi_closure_helper_LINUX64 (ffi_closure *, void *,
diff --git a/Modules/_ctypes/libffi/src/powerpc/ffi_darwin.c b/Modules/_ctypes/libffi/src/powerpc/ffi_darwin.c
index d84f1c3..1d1d48c 100644
--- a/Modules/_ctypes/libffi/src/powerpc/ffi_darwin.c
+++ b/Modules/_ctypes/libffi/src/powerpc/ffi_darwin.c
@@ -3,7 +3,7 @@
 
    Copyright (C) 1998 Geoffrey Keating
    Copyright (C) 2001 John Hornkvist
-   Copyright (C) 2002, 2006, 2007, 2009 Free Software Foundation, Inc.
+   Copyright (C) 2002, 2006, 2007, 2009, 2010 Free Software Foundation, Inc.
 
    FFI support for Darwin and AIX.
    
@@ -35,11 +35,17 @@
 extern void ffi_closure_ASM (void);
 
 enum {
-  /* The assembly depends on these exact flags.  */
-  FLAG_RETURNS_NOTHING  = 1 << (31-30), /* These go in cr7  */
-  FLAG_RETURNS_FP       = 1 << (31-29),
-  FLAG_RETURNS_64BITS   = 1 << (31-28),
-  FLAG_RETURNS_128BITS  = 1 << (31-31),
+  /* The assembly depends on these exact flags.  
+     For Darwin64 (when FLAG_RETURNS_STRUCT is set):
+       FLAG_RETURNS_FP indicates that the structure embeds FP data.
+       FLAG_RETURNS_128BITS signals a special struct size that is not
+       expanded for float content.  */
+  FLAG_RETURNS_128BITS	= 1 << (31-31), /* These go in cr7  */
+  FLAG_RETURNS_NOTHING	= 1 << (31-30),
+  FLAG_RETURNS_FP	= 1 << (31-29),
+  FLAG_RETURNS_64BITS	= 1 << (31-28),
+
+  FLAG_RETURNS_STRUCT	= 1 << (31-27), /* This goes in cr6  */
 
   FLAG_ARG_NEEDS_COPY   = 1 << (31- 7),
   FLAG_FP_ARGUMENTS     = 1 << (31- 6), /* cr1.eq; specified by ABI  */
@@ -50,43 +56,61 @@
 /* About the DARWIN ABI.  */
 enum {
   NUM_GPR_ARG_REGISTERS = 8,
-  NUM_FPR_ARG_REGISTERS = 13
+  NUM_FPR_ARG_REGISTERS = 13,
+  LINKAGE_AREA_GPRS = 6
 };
-enum { ASM_NEEDS_REGISTERS = 4 };
+
+enum { ASM_NEEDS_REGISTERS = 4 }; /* r28-r31 */
 
 /* ffi_prep_args is called by the assembly routine once stack space
    has been allocated for the function's arguments.
+   
+   m32/m64
 
    The stack layout we want looks like this:
 
    |   Return address from ffi_call_DARWIN      |	higher addresses
    |--------------------------------------------|
-   |   Previous backchain pointer	4	|	stack pointer here
+   |   Previous backchain pointer	4/8	|	stack pointer here
    |--------------------------------------------|<+ <<<	on entry to
-   |   Saved r28-r31			4*4	| |	ffi_call_DARWIN
+   |   ASM_NEEDS_REGISTERS=r28-r31   4*(4/8)	| |	ffi_call_DARWIN
    |--------------------------------------------| |
-   |   Parameters             (at least 8*4=32) | |
+   |   When we have any FP activity... the	| |
+   |   FPRs occupy NUM_FPR_ARG_REGISTERS slots	| |
+   |   here fp13 .. fp1 from high to low addr.	| |
+   ~						~ ~
+   |   Parameters      (at least 8*4/8=32/64)	| | NUM_GPR_ARG_REGISTERS
    |--------------------------------------------| |
-   |   Space for GPR2                   4       | |
+   |   TOC=R2 (AIX) Reserved (Darwin)   4/8	| |
    |--------------------------------------------| |	stack	|
-   |   Reserved                       2*4       | |	grows	|
+   |   Reserved                       2*4/8	| |	grows	|
    |--------------------------------------------| |	down	V
-   |   Space for callee's LR		4	| |
+   |   Space for callee's LR		4/8	| |
    |--------------------------------------------| |	lower addresses
-   |   Saved CR                         4       | |
+   |   Saved CR [low word for m64]      4/8	| |
    |--------------------------------------------| |     stack pointer here
-   |   Current backchain pointer	4	|-/	during
+   |   Current backchain pointer	4/8	|-/	during
    |--------------------------------------------|   <<<	ffi_call_DARWIN
 
    */
 
+#if defined(POWERPC_DARWIN64)
+static void
+darwin64_pass_struct_by_value 
+  (ffi_type *, char *, unsigned, unsigned *, double **, unsigned long **);
+#endif
+
+/* This depends on GPR_SIZE = sizeof (unsigned long) */
+
 void
 ffi_prep_args (extended_cif *ecif, unsigned long *const stack)
 {
   const unsigned bytes = ecif->cif->bytes;
   const unsigned flags = ecif->cif->flags;
   const unsigned nargs = ecif->cif->nargs;
+#if !defined(POWERPC_DARWIN64) 
   const ffi_abi abi = ecif->cif->abi;
+#endif
 
   /* 'stacktop' points at the previous backchain pointer.  */
   unsigned long *const stacktop = stack + (bytes / sizeof(unsigned long));
@@ -94,18 +118,19 @@
   /* 'fpr_base' points at the space for fpr1, and grows upwards as
      we use FPR registers.  */
   double *fpr_base = (double *) (stacktop - ASM_NEEDS_REGISTERS) - NUM_FPR_ARG_REGISTERS;
-  int fparg_count = 0;
-
+  int gp_count = 0, fparg_count = 0;
 
   /* 'next_arg' grows up as we put parameters in it.  */
-  unsigned long *next_arg = stack + 6; /* 6 reserved positions.  */
+  unsigned long *next_arg = stack + LINKAGE_AREA_GPRS; /* 6 reserved positions.  */
 
   int i;
   double double_tmp;
   void **p_argv = ecif->avalue;
   unsigned long gprvalue;
   ffi_type** ptr = ecif->cif->arg_types;
+#if !defined(POWERPC_DARWIN64) 
   char *dest_cpy;
+#endif
   unsigned size_al = 0;
 
   /* Check that everything starts aligned properly.  */
@@ -130,25 +155,30 @@
 	   the size of the floating-point parameter are skipped.  */
 	case FFI_TYPE_FLOAT:
 	  double_tmp = *(float *) *p_argv;
-	  if (fparg_count >= NUM_FPR_ARG_REGISTERS)
-	    *(double *)next_arg = double_tmp;
-	  else
+	  if (fparg_count < NUM_FPR_ARG_REGISTERS)
 	    *fpr_base++ = double_tmp;
+#if defined(POWERPC_DARWIN)
+	  *(float *)next_arg = *(float *) *p_argv;
+#else
+	  *(double *)next_arg = double_tmp;
+#endif
 	  next_arg++;
+	  gp_count++;
 	  fparg_count++;
 	  FFI_ASSERT(flags & FLAG_FP_ARGUMENTS);
 	  break;
 
 	case FFI_TYPE_DOUBLE:
 	  double_tmp = *(double *) *p_argv;
-	  if (fparg_count >= NUM_FPR_ARG_REGISTERS)
-	    *(double *)next_arg = double_tmp;
-	  else
+	  if (fparg_count < NUM_FPR_ARG_REGISTERS)
 	    *fpr_base++ = double_tmp;
+	  *(double *)next_arg = double_tmp;
 #ifdef POWERPC64
 	  next_arg++;
+	  gp_count++;
 #else
 	  next_arg += 2;
+	  gp_count += 2;
 #endif
 	  fparg_count++;
 	  FFI_ASSERT(flags & FLAG_FP_ARGUMENTS);
@@ -157,30 +187,41 @@
 #if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
 
 	case FFI_TYPE_LONGDOUBLE:
-#ifdef POWERPC64
+#  if defined(POWERPC64) && !defined(POWERPC_DARWIN64)
+	  /* ??? This will exceed the regs count when the value starts at fp13
+	     and it will not put the extra bit on the stack.  */
 	  if (fparg_count < NUM_FPR_ARG_REGISTERS)
 	    *(long double *) fpr_base++ = *(long double *) *p_argv;
 	  else
 	    *(long double *) next_arg = *(long double *) *p_argv;
 	  next_arg += 2;
 	  fparg_count += 2;
-#else
+#  else
 	  double_tmp = ((double *) *p_argv)[0];
 	  if (fparg_count < NUM_FPR_ARG_REGISTERS)
 	    *fpr_base++ = double_tmp;
-	  else
-	    *(double *) next_arg = double_tmp;
+	  *(double *) next_arg = double_tmp;
+#    if defined(POWERPC_DARWIN64)
+	  next_arg++;
+	  gp_count++;
+#    else
 	  next_arg += 2;
+	  gp_count += 2;
+#    endif
 	  fparg_count++;
-
 	  double_tmp = ((double *) *p_argv)[1];
 	  if (fparg_count < NUM_FPR_ARG_REGISTERS)
 	    *fpr_base++ = double_tmp;
-	  else
-	    *(double *) next_arg = double_tmp;
+	  *(double *) next_arg = double_tmp;
+#    if defined(POWERPC_DARWIN64)
+	  next_arg++;
+	  gp_count++;
+#    else
 	  next_arg += 2;
+	  gp_count += 2;
+#    endif
 	  fparg_count++;
-#endif
+#  endif
 	  FFI_ASSERT(flags & FLAG_FP_ARGUMENTS);
 	  break;
 #endif
@@ -192,6 +233,7 @@
 #else
 	  *(long long *) next_arg = *(long long *) *p_argv;
 	  next_arg += 2;
+	  gp_count += 2;
 #endif
 	  break;
 	case FFI_TYPE_POINTER:
@@ -211,32 +253,35 @@
 	  goto putgpr;
 
 	case FFI_TYPE_STRUCT:
-#ifdef POWERPC64
-	  dest_cpy = (char *) next_arg;
 	  size_al = (*ptr)->size;
-	  if ((*ptr)->elements[0]->type == 3)
-	    size_al = ALIGN((*ptr)->size, 8);
-	  if (size_al < 3 && abi == FFI_DARWIN)
-	    dest_cpy += 4 - size_al;
-
-	  memcpy ((char *) dest_cpy, (char *) *p_argv, size_al);
-	  next_arg += (size_al + 7) / 8;
+#if defined(POWERPC_DARWIN64)
+	  next_arg = (unsigned long *)ALIGN((char *)next_arg, (*ptr)->alignment);
+	  darwin64_pass_struct_by_value (*ptr, (char *) *p_argv, 
+					 (unsigned) size_al,
+					 (unsigned int *) &fparg_count,
+					 &fpr_base, &next_arg);
 #else
 	  dest_cpy = (char *) next_arg;
 
+	  /* If the first member of the struct is a double, then include enough
+	     padding in the struct size to align it to double-word.  */
+	  if ((*ptr)->elements[0]->type == FFI_TYPE_DOUBLE)
+	    size_al = ALIGN((*ptr)->size, 8);
+
+#  if defined(POWERPC64) 
+	  FFI_ASSERT (abi != FFI_DARWIN);
+	  memcpy ((char *) dest_cpy, (char *) *p_argv, size_al);
+	  next_arg += (size_al + 7) / 8;
+#  else
 	  /* Structures that match the basic modes (QI 1 byte, HI 2 bytes,
 	     SI 4 bytes) are aligned as if they were those modes.
 	     Structures with 3 byte in size are padded upwards.  */
-	  size_al = (*ptr)->size;
-	  /* If the first member of the struct is a double, then align
-	     the struct to double-word.  */
-	  if ((*ptr)->elements[0]->type == FFI_TYPE_DOUBLE)
-	    size_al = ALIGN((*ptr)->size, 8);
 	  if (size_al < 3 && abi == FFI_DARWIN)
 	    dest_cpy += 4 - size_al;
 
 	  memcpy((char *) dest_cpy, (char *) *p_argv, size_al);
 	  next_arg += (size_al + 3) / 4;
+#  endif
 #endif
 	  break;
 
@@ -249,6 +294,7 @@
 	  gprvalue = *(unsigned int *) *p_argv;
 	putgpr:
 	  *next_arg++ = gprvalue;
+	  gp_count++;
 	  break;
 	default:
 	  break;
@@ -256,14 +302,275 @@
     }
 
   /* Check that we didn't overrun the stack...  */
-  //FFI_ASSERT(gpr_base <= stacktop - ASM_NEEDS_REGISTERS);
-  //FFI_ASSERT((unsigned *)fpr_base
-  //	     <= stacktop - ASM_NEEDS_REGISTERS - NUM_GPR_ARG_REGISTERS);
-  //FFI_ASSERT(flags & FLAG_4_GPR_ARGUMENTS || intarg_count <= 4);
+  /* FFI_ASSERT(gpr_base <= stacktop - ASM_NEEDS_REGISTERS);
+     FFI_ASSERT((unsigned *)fpr_base
+     	     <= stacktop - ASM_NEEDS_REGISTERS - NUM_GPR_ARG_REGISTERS);
+     FFI_ASSERT(flags & FLAG_4_GPR_ARGUMENTS || intarg_count <= 4);  */
 }
 
+#if defined(POWERPC_DARWIN64)
+
+/* See if we can put some of the struct into fprs.
+   This should not be called for structures of size 16 bytes, since these are not
+   broken out this way.  */
+static void
+darwin64_scan_struct_for_floats (ffi_type *s, unsigned *nfpr)
+{
+  int i;
+
+  FFI_ASSERT (s->type == FFI_TYPE_STRUCT)
+
+  for (i = 0; s->elements[i] != NULL; i++)
+    {
+      ffi_type *p = s->elements[i];
+      switch (p->type)
+	{
+	  case FFI_TYPE_STRUCT:
+	    darwin64_scan_struct_for_floats (p, nfpr);
+	    break;
+	  case FFI_TYPE_LONGDOUBLE:
+	    (*nfpr) += 2;
+	    break;
+	  case FFI_TYPE_DOUBLE:
+	  case FFI_TYPE_FLOAT:
+	    (*nfpr) += 1;
+	    break;
+	  default:
+	    break;    
+	}
+    }
+}
+
+static int
+darwin64_struct_size_exceeds_gprs_p (ffi_type *s, char *src, unsigned *nfpr)
+{
+  unsigned struct_offset=0, i;
+
+  for (i = 0; s->elements[i] != NULL; i++)
+    {
+      char *item_base;
+      ffi_type *p = s->elements[i];
+      /* Find the start of this item (0 for the first one).  */
+      if (i > 0)
+        struct_offset = ALIGN(struct_offset, p->alignment);
+
+      item_base = src + struct_offset;
+
+      switch (p->type)
+	{
+	  case FFI_TYPE_STRUCT:
+	    if (darwin64_struct_size_exceeds_gprs_p (p, item_base, nfpr))
+	      return 1;
+	    break;
+	  case FFI_TYPE_LONGDOUBLE:
+	    if (*nfpr >= NUM_FPR_ARG_REGISTERS)
+	      return 1;
+	    (*nfpr) += 1;
+	    item_base += 8;
+	  /* FALL THROUGH */
+	  case FFI_TYPE_DOUBLE:
+	    if (*nfpr >= NUM_FPR_ARG_REGISTERS)
+	      return 1;
+	    (*nfpr) += 1;
+	    break;
+	  case FFI_TYPE_FLOAT:
+	    if (*nfpr >= NUM_FPR_ARG_REGISTERS)
+	      return 1;
+	    (*nfpr) += 1;
+	    break;
+	  default:
+	    /* If we try and place any item, that is non-float, once we've
+	       exceeded the 8 GPR mark, then we can't fit the struct.  */
+	    if ((unsigned long)item_base >= 8*8) 
+	      return 1;
+	    break;    
+	}
+      /* now count the size of what we just used.  */
+      struct_offset += p->size;
+    }
+  return 0;
+}
+
+/* Can this struct be returned by value?  */
+int 
+darwin64_struct_ret_by_value_p (ffi_type *s)
+{
+  unsigned nfp = 0;
+
+  FFI_ASSERT (s && s->type == FFI_TYPE_STRUCT);
+  
+  /* The largest structure we can return is 8long + 13 doubles.  */
+  if (s->size > 168)
+    return 0;
+  
+  /* We can't pass more than 13 floats.  */
+  darwin64_scan_struct_for_floats (s, &nfp);
+  if (nfp > 13)
+    return 0;
+  
+  /* If there are not too many floats, and the struct is
+     small enough to accommodate in the GPRs, then it must be OK.  */
+  if (s->size <= 64)
+    return 1;
+  
+  /* Well, we have to look harder.  */
+  nfp = 0;
+  if (darwin64_struct_size_exceeds_gprs_p (s, NULL, &nfp))
+    return 0;
+  
+  return 1;
+}
+
+void
+darwin64_pass_struct_floats (ffi_type *s, char *src, 
+			     unsigned *nfpr, double **fprs)
+{
+  int i;
+  double *fpr_base = *fprs;
+  unsigned struct_offset = 0;
+
+  /* We don't assume anything about the alignment of the source.  */
+  for (i = 0; s->elements[i] != NULL; i++)
+    {
+      char *item_base;
+      ffi_type *p = s->elements[i];
+      /* Find the start of this item (0 for the first one).  */
+      if (i > 0)
+        struct_offset = ALIGN(struct_offset, p->alignment);
+      item_base = src + struct_offset;
+
+      switch (p->type)
+	{
+	  case FFI_TYPE_STRUCT:
+	    darwin64_pass_struct_floats (p, item_base, nfpr,
+					   &fpr_base);
+	    break;
+	  case FFI_TYPE_LONGDOUBLE:
+	    if (*nfpr < NUM_FPR_ARG_REGISTERS)
+	      *fpr_base++ = *(double *)item_base;
+	    (*nfpr) += 1;
+	    item_base += 8;
+	  /* FALL THROUGH */
+	  case FFI_TYPE_DOUBLE:
+	    if (*nfpr < NUM_FPR_ARG_REGISTERS)
+	      *fpr_base++ = *(double *)item_base;
+	    (*nfpr) += 1;
+	    break;
+	  case FFI_TYPE_FLOAT:
+	    if (*nfpr < NUM_FPR_ARG_REGISTERS)
+	      *fpr_base++ = (double) *(float *)item_base;
+	    (*nfpr) += 1;
+	    break;
+	  default:
+	    break;    
+	}
+      /* now count the size of what we just used.  */
+      struct_offset += p->size;
+    }
+  /* Update the scores.  */
+  *fprs = fpr_base;
+}
+
+/* Darwin64 special rules.
+   Break out a struct into params and float registers.  */
+static void
+darwin64_pass_struct_by_value (ffi_type *s, char *src, unsigned size,
+			       unsigned *nfpr, double **fprs, unsigned long **arg)
+{
+  unsigned long *next_arg = *arg;
+  char *dest_cpy = (char *)next_arg;
+
+  FFI_ASSERT (s->type == FFI_TYPE_STRUCT)
+
+  if (!size)
+    return;
+
+  /* First... special cases.  */
+  if (size < 3
+      || (size == 4 
+	  && s->elements[0] 
+	  && s->elements[0]->type != FFI_TYPE_FLOAT))
+    {
+      /* Must be at least one GPR, padding is unspecified in value, 
+	 let's make it zero.  */
+      *next_arg = 0UL; 
+      dest_cpy += 8 - size;
+      memcpy ((char *) dest_cpy, src, size);
+      next_arg++;
+    }
+  else if (size == 16)
+    {
+      memcpy ((char *) dest_cpy, src, size);
+      next_arg += 2;
+    }
+  else
+    {
+      /* now the general case, we consider embedded floats.  */
+      memcpy ((char *) dest_cpy, src, size);
+      darwin64_pass_struct_floats (s, src, nfpr, fprs);
+      next_arg += (size+7)/8;
+    }
+    
+  *arg = next_arg;
+}
+
+double *
+darwin64_struct_floats_to_mem (ffi_type *s, char *dest, double *fprs, unsigned *nf)
+{
+  int i;
+  unsigned struct_offset = 0;
+
+  /* We don't assume anything about the alignment of the source.  */
+  for (i = 0; s->elements[i] != NULL; i++)
+    {
+      char *item_base;
+      ffi_type *p = s->elements[i];
+      /* Find the start of this item (0 for the first one).  */
+      if (i > 0)
+        struct_offset = ALIGN(struct_offset, p->alignment);
+      item_base = dest + struct_offset;
+
+      switch (p->type)
+	{
+	  case FFI_TYPE_STRUCT:
+	    fprs = darwin64_struct_floats_to_mem (p, item_base, fprs, nf);
+	    break;
+	  case FFI_TYPE_LONGDOUBLE:
+	    if (*nf < NUM_FPR_ARG_REGISTERS)
+	      {
+		*(double *)item_base = *fprs++ ;
+		(*nf) += 1;
+	      }
+	    item_base += 8;
+	  /* FALL THROUGH */
+	  case FFI_TYPE_DOUBLE:
+	    if (*nf < NUM_FPR_ARG_REGISTERS)
+	      {
+		*(double *)item_base = *fprs++ ;
+		(*nf) += 1;
+	      }
+	    break;
+	  case FFI_TYPE_FLOAT:
+	    if (*nf < NUM_FPR_ARG_REGISTERS)
+	      {
+		*(float *)item_base = (float) *fprs++ ;
+		(*nf) += 1;
+	      }
+	    break;
+	  default:
+	    break;    
+	}
+      /* now count the size of what we just used.  */
+      struct_offset += p->size;
+    }
+  return fprs;
+}
+
+#endif
+
 /* Adjust the size of S to be correct for Darwin.
-   On Darwin, the first field of a structure has natural alignment.  */
+   On Darwin m32, the first field of a structure has natural alignment.  
+   On Darwin m64, all fields have natural alignment.  */
 
 static void
 darwin_adjust_aggregate_sizes (ffi_type *s)
@@ -280,22 +587,29 @@
       int align;
       
       p = s->elements[i];
-      darwin_adjust_aggregate_sizes (p);
-      if (i == 0
-	  && (p->type == FFI_TYPE_UINT64
-	      || p->type == FFI_TYPE_SINT64
-	      || p->type == FFI_TYPE_DOUBLE
-	      || p->alignment == 8))
-	align = 8;
+      if (p->type == FFI_TYPE_STRUCT)
+	darwin_adjust_aggregate_sizes (p);
+#if defined(POWERPC_DARWIN64)
+      /* Natural alignment for all items.  */
+      align = p->alignment;
+#else
+      /* Natrual alignment for the first item... */
+      if (i == 0)
+	align = p->alignment;
       else if (p->alignment == 16 || p->alignment < 4)
+	/* .. subsequent items with vector or align < 4 have natural align.  */
 	align = p->alignment;
       else
+	/* .. or align is 4.  */
 	align = 4;
+#endif
+      /* Pad, if necessary, before adding the current item.  */
       s->size = ALIGN(s->size, align) + p->size;
     }
   
   s->size = ALIGN(s->size, s->alignment);
   
+  /* This should not be necessary on m64, but harmless.  */
   if (s->elements[0]->type == FFI_TYPE_UINT64
       || s->elements[0]->type == FFI_TYPE_SINT64
       || s->elements[0]->type == FFI_TYPE_DOUBLE
@@ -344,10 +658,10 @@
 ffi_prep_cif_machdep (ffi_cif *cif)
 {
   /* All this is for the DARWIN ABI.  */
-  int i;
+  unsigned i;
   ffi_type **ptr;
   unsigned bytes;
-  int fparg_count = 0, intarg_count = 0;
+  unsigned fparg_count = 0, intarg_count = 0;
   unsigned flags = 0;
   unsigned size_al = 0;
 
@@ -372,16 +686,25 @@
   /* Space for the frame pointer, callee's LR, CR, etc, and for
      the asm's temp regs.  */
 
-  bytes = (6 + ASM_NEEDS_REGISTERS) * sizeof(long);
+  bytes = (LINKAGE_AREA_GPRS + ASM_NEEDS_REGISTERS) * sizeof(unsigned long);
 
-  /* Return value handling.  The rules are as follows:
+  /* Return value handling.  
+    The rules m32 are as follows:
      - 32-bit (or less) integer values are returned in gpr3;
-     - Structures of size <= 4 bytes also returned in gpr3;
-     - 64-bit integer values and structures between 5 and 8 bytes are returned
-       in gpr3 and gpr4;
+     - structures of size <= 4 bytes also returned in gpr3;
+     - 64-bit integer values [??? and structures between 5 and 8 bytes] are
+       returned in gpr3 and gpr4;
      - Single/double FP values are returned in fpr1;
      - Long double FP (if not equivalent to double) values are returned in
        fpr1 and fpr2;
+     m64:
+     - 64-bit or smaller integral values are returned in GPR3
+     - Single/double FP values are returned in fpr1;
+     - Long double FP values are returned in fpr1 and fpr2;
+     m64 Structures:
+     - If the structure could be accommodated in registers were it to be the
+       first argument to a routine, then it is returned in those registers.
+     m32/m64 structures otherwise:
      - Larger structures values are allocated space and a pointer is passed
        as the first argument.  */
   switch (cif->rtype->type)
@@ -410,9 +733,42 @@
       break;
 
     case FFI_TYPE_STRUCT:
+#if defined(POWERPC_DARWIN64)
+      {
+	/* Can we fit the struct into regs?  */
+	if (darwin64_struct_ret_by_value_p (cif->rtype))
+	  {
+	    unsigned nfpr = 0;
+	    flags |= FLAG_RETURNS_STRUCT;
+	    if (cif->rtype->size != 16)
+	      darwin64_scan_struct_for_floats (cif->rtype, &nfpr) ;
+	    else
+	      flags |= FLAG_RETURNS_128BITS;
+	    /* Will be 0 for 16byte struct.  */
+	    if (nfpr)
+	      flags |= FLAG_RETURNS_FP;
+	  }
+	else /* By ref. */
+	  {
+	    flags |= FLAG_RETVAL_REFERENCE;
+	    flags |= FLAG_RETURNS_NOTHING;
+	    intarg_count++;
+	  }
+      }
+#elif defined(DARWIN_PPC)
+      if (cif->rtype->size <= 4)
+	flags |= FLAG_RETURNS_STRUCT;
+      else /* else by reference.  */
+	{
+	  flags |= FLAG_RETVAL_REFERENCE;
+	  flags |= FLAG_RETURNS_NOTHING;
+	  intarg_count++;
+	}
+#else /* assume we pass by ref.  */
       flags |= FLAG_RETVAL_REFERENCE;
       flags |= FLAG_RETURNS_NOTHING;
       intarg_count++;
+#endif
       break;
     case FFI_TYPE_VOID:
       flags |= FLAG_RETURNS_NOTHING;
@@ -425,57 +781,83 @@
 
   /* The first NUM_GPR_ARG_REGISTERS words of integer arguments, and the
      first NUM_FPR_ARG_REGISTERS fp arguments, go in registers; the rest
-     goes on the stack.  Structures are passed as a pointer to a copy of
-     the structure. Stuff on the stack needs to keep proper alignment.  */
+     goes on the stack.  
+     ??? Structures are passed as a pointer to a copy of the structure. 
+     Stuff on the stack needs to keep proper alignment.  
+     For m64 the count is effectively of half-GPRs.  */
   for (ptr = cif->arg_types, i = cif->nargs; i > 0; i--, ptr++)
     {
+      unsigned align_words;
       switch ((*ptr)->type)
 	{
 	case FFI_TYPE_FLOAT:
 	case FFI_TYPE_DOUBLE:
 	  fparg_count++;
+#if !defined(POWERPC_DARWIN64)
 	  /* If this FP arg is going on the stack, it must be
 	     8-byte-aligned.  */
 	  if (fparg_count > NUM_FPR_ARG_REGISTERS
-	      && intarg_count%2 != 0)
+	      && (intarg_count & 0x01) != 0)
 	    intarg_count++;
+#endif
 	  break;
 
 #if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
-
 	case FFI_TYPE_LONGDOUBLE:
 	  fparg_count += 2;
 	  /* If this FP arg is going on the stack, it must be
-	     8-byte-aligned.  */
-	  if (fparg_count > NUM_FPR_ARG_REGISTERS
-	      && intarg_count%2 != 0)
-	    intarg_count++;
-	  intarg_count +=2;
+	     16-byte-aligned.  */
+	  if (fparg_count >= NUM_FPR_ARG_REGISTERS)
+#if defined (POWERPC64)
+	    intarg_count = ALIGN(intarg_count, 2);
+#else
+	    intarg_count = ALIGN(intarg_count, 4);
+#endif
 	  break;
 #endif
 
 	case FFI_TYPE_UINT64:
 	case FFI_TYPE_SINT64:
+#if defined(POWERPC64)
+	  intarg_count++;
+#else
 	  /* 'long long' arguments are passed as two words, but
 	     either both words must fit in registers or both go
 	     on the stack.  If they go on the stack, they must
 	     be 8-byte-aligned.  */
 	  if (intarg_count == NUM_GPR_ARG_REGISTERS-1
-	      || (intarg_count >= NUM_GPR_ARG_REGISTERS && intarg_count%2 != 0))
+	      || (intarg_count >= NUM_GPR_ARG_REGISTERS 
+	          && (intarg_count & 0x01) != 0))
 	    intarg_count++;
 	  intarg_count += 2;
+#endif
 	  break;
 
 	case FFI_TYPE_STRUCT:
 	  size_al = (*ptr)->size;
-	  /* If the first member of the struct is a double, then align
-	     the struct to double-word.  */
-	  if ((*ptr)->elements[0]->type == FFI_TYPE_DOUBLE)
-	    size_al = ALIGN((*ptr)->size, 8);
-#ifdef POWERPC64
+#if defined(POWERPC_DARWIN64)
+	  align_words = (*ptr)->alignment >> 3;
+	  if (align_words)
+	    intarg_count = ALIGN(intarg_count, align_words);
+	  /* Base size of the struct.  */
 	  intarg_count += (size_al + 7) / 8;
+	  /* If 16 bytes then don't worry about floats.  */
+	  if (size_al != 16)
+	    /* Scan through for floats to be placed in regs.  */
+	    darwin64_scan_struct_for_floats (*ptr, &fparg_count) ;
 #else
+	  align_words = (*ptr)->alignment >> 2;
+	  if (align_words)
+	    intarg_count = ALIGN(intarg_count, align_words);
+	  /* If the first member of the struct is a double, then align
+	     the struct to double-word. 
+	  if ((*ptr)->elements[0]->type == FFI_TYPE_DOUBLE)
+	    size_al = ALIGN((*ptr)->size, 8); */
+#  ifdef POWERPC64
+	  intarg_count += (size_al + 7) / 8;
+#  else
 	  intarg_count += (size_al + 3) / 4;
+#  endif
 #endif
 	  break;
 
@@ -490,9 +872,18 @@
   if (fparg_count != 0)
     flags |= FLAG_FP_ARGUMENTS;
 
+#if defined(POWERPC_DARWIN64)
+  /* Space to image the FPR registers, if needed - which includes when they might be
+     used in a struct return.  */
+  if (fparg_count != 0 
+      || ((flags & FLAG_RETURNS_STRUCT)
+	   && (flags & FLAG_RETURNS_FP)))
+    bytes += NUM_FPR_ARG_REGISTERS * sizeof(double);
+#else
   /* Space for the FPR registers, if needed.  */
   if (fparg_count != 0)
     bytes += NUM_FPR_ARG_REGISTERS * sizeof(double);
+#endif
 
   /* Stack space.  */
 #ifdef POWERPC64
@@ -506,7 +897,7 @@
     bytes += NUM_GPR_ARG_REGISTERS * sizeof(long);
 
   /* The stack space allocated needs to be a multiple of 16 bytes.  */
-  bytes = (bytes + 15) & ~0xF;
+  bytes = ALIGN(bytes, 16) ;
 
   cif->flags = flags;
   cif->bytes = bytes;
@@ -516,8 +907,9 @@
 
 extern void ffi_call_AIX(extended_cif *, long, unsigned, unsigned *,
 			 void (*fn)(void), void (*fn2)(void));
+
 extern void ffi_call_DARWIN(extended_cif *, long, unsigned, unsigned *,
-			    void (*fn)(void), void (*fn2)(void));
+			    void (*fn)(void), void (*fn2)(void), ffi_type*);
 
 void
 ffi_call (ffi_cif *cif, void (*fn)(void), void *rvalue, void **avalue)
@@ -542,11 +934,11 @@
     {
     case FFI_AIX:
       ffi_call_AIX(&ecif, -(long)cif->bytes, cif->flags, ecif.rvalue, fn,
-		   ffi_prep_args);
+		   FFI_FN(ffi_prep_args));
       break;
     case FFI_DARWIN:
       ffi_call_DARWIN(&ecif, -(long)cif->bytes, cif->flags, ecif.rvalue, fn,
-		      ffi_prep_args);
+		      FFI_FN(ffi_prep_args), cif->rtype);
       break;
     default:
       FFI_ASSERT(0);
@@ -566,58 +958,48 @@
 } aix_fd;
 
 /* here I'd like to add the stack frame layout we use in darwin_closure.S
-   and aix_clsoure.S
+   and aix_closure.S
 
-   SP previous -> +---------------------------------------+ <--- child frame
-		  | back chain to caller 4                |
-		  +---------------------------------------+ 4
-		  | saved CR 4                            |
-		  +---------------------------------------+ 8
-		  | saved LR 4                            |
-		  +---------------------------------------+ 12
-		  | reserved for compilers 4              |
-		  +---------------------------------------+ 16
-		  | reserved for binders 4                |
-		  +---------------------------------------+ 20
-		  | saved TOC pointer 4                   |
-		  +---------------------------------------+ 24
-		  | always reserved 8*4=32 (previous GPRs)|
-		  | according to the linkage convention   |
-		  | from AIX                              |
-		  +---------------------------------------+ 56
-		  | our FPR area 13*8=104                 |
-		  | f1                                    |
-		  | .                                     |
-		  | f13                                   |
-		  +---------------------------------------+ 160
-		  | result area 8                         |
-		  +---------------------------------------+ 168
-		  | alignement to the next multiple of 16 |
-SP current -->    +---------------------------------------+ 176 <- parent frame
-		  | back chain to caller 4                |
-		  +---------------------------------------+ 180
-		  | saved CR 4                            |
-		  +---------------------------------------+ 184
-		  | saved LR 4                            |
-		  +---------------------------------------+ 188
-		  | reserved for compilers 4              |
-		  +---------------------------------------+ 192
-		  | reserved for binders 4                |
-		  +---------------------------------------+ 196
-		  | saved TOC pointer 4                   |
-		  +---------------------------------------+ 200
-		  | always reserved 8*4=32  we store our  |
-		  | GPRs here                             |
-		  | r3                                    |
-		  | .                                     |
-		  | r10                                   |
-		  +---------------------------------------+ 232
-		  | overflow part                         |
-		  +---------------------------------------+ xxx
-		  | ????                                  |
-		  +---------------------------------------+ xxx
+   m32/m64
+
+   The stack layout looks like this:
+
+   |   Additional params...			| |     Higher address
+   ~						~ ~
+   |   Parameters      (at least 8*4/8=32/64)	| | NUM_GPR_ARG_REGISTERS
+   |--------------------------------------------| |
+   |   TOC=R2 (AIX) Reserved (Darwin)   4/8	| |
+   |--------------------------------------------| |
+   |   Reserved                       2*4/8	| |
+   |--------------------------------------------| |
+   |   Space for callee's LR		4/8	| |
+   |--------------------------------------------| |
+   |   Saved CR [low word for m64]      4/8	| |
+   |--------------------------------------------| |
+   |   Current backchain pointer	4/8	|-/ Parent's frame.
+   |--------------------------------------------| <+ <<< on entry to ffi_closure_ASM
+   |   Result Bytes			16	| |
+   |--------------------------------------------| |
+   ~   padding to 16-byte alignment		~ ~
+   |--------------------------------------------| |
+   |   NUM_FPR_ARG_REGISTERS slots		| |
+   |   here fp13 .. fp1		       13*8	| |
+   |--------------------------------------------| |
+   |   R3..R10			  8*4/8=32/64	| | NUM_GPR_ARG_REGISTERS
+   |--------------------------------------------| |
+   |   TOC=R2 (AIX) Reserved (Darwin)   4/8	| |
+   |--------------------------------------------| |	stack	|
+   |   Reserved [compiler,binder]     2*4/8	| |	grows	|
+   |--------------------------------------------| |	down	V
+   |   Space for callee's LR		4/8	| |
+   |--------------------------------------------| |	lower addresses
+   |   Saved CR [low word for m64]      4/8	| |
+   |--------------------------------------------| |     stack pointer here
+   |   Current backchain pointer	4/8	|-/	during
+   |--------------------------------------------|   <<<	ffi_closure_ASM.
 
 */
+
 ffi_status
 ffi_prep_closure_loc (ffi_closure* closure,
 		      ffi_cif* cif,
@@ -631,30 +1013,44 @@
 
   switch (cif->abi)
     {
-    case FFI_DARWIN:
+      case FFI_DARWIN:
 
-      FFI_ASSERT (cif->abi == FFI_DARWIN);
+	FFI_ASSERT (cif->abi == FFI_DARWIN);
 
-      tramp = (unsigned int *) &closure->tramp[0];
-      tramp[0] = 0x7c0802a6;  /*   mflr    r0  */
-      tramp[1] = 0x429f000d;  /*   bcl-    20,4*cr7+so,0x10  */
-      tramp[4] = 0x7d6802a6;  /*   mflr    r11  */
-      tramp[5] = 0x818b0000;  /*   lwz     r12,0(r11) function address  */
-      tramp[6] = 0x7c0803a6;  /*   mtlr    r0   */
-      tramp[7] = 0x7d8903a6;  /*   mtctr   r12  */
-      tramp[8] = 0x816b0004;  /*   lwz     r11,4(r11) static chain  */
-      tramp[9] = 0x4e800420;  /*   bctr  */
-      tramp[2] = (unsigned long) ffi_closure_ASM; /* function  */
-      tramp[3] = (unsigned long) codeloc; /* context  */
+	tramp = (unsigned int *) &closure->tramp[0];
+#if defined(POWERPC_DARWIN64)
+	tramp[0] = 0x7c0802a6;  /*   mflr    r0  */
+	tramp[1] = 0x429f0015;  /*   bcl-    20,4*cr7+so,  +0x18 (L1)  */
+	/* We put the addresses here.  */
+	tramp[6] = 0x7d6802a6;  /*L1:   mflr    r11  */
+	tramp[7] = 0xe98b0000;  /*   ld     r12,0(r11) function address  */
+	tramp[8] = 0x7c0803a6;  /*   mtlr    r0   */
+	tramp[9] = 0x7d8903a6;  /*   mtctr   r12  */
+	tramp[10] = 0xe96b0008;  /*   lwz     r11,8(r11) static chain  */
+	tramp[11] = 0x4e800420;  /*   bctr  */
 
-      closure->cif = cif;
-      closure->fun = fun;
-      closure->user_data = user_data;
+	*((unsigned long *)&tramp[2]) = (unsigned long) ffi_closure_ASM; /* function  */
+	*((unsigned long *)&tramp[4]) = (unsigned long) codeloc; /* context  */
+#else
+	tramp[0] = 0x7c0802a6;  /*   mflr    r0  */
+	tramp[1] = 0x429f000d;  /*   bcl-    20,4*cr7+so,0x10  */
+	tramp[4] = 0x7d6802a6;  /*   mflr    r11  */
+	tramp[5] = 0x818b0000;  /*   lwz     r12,0(r11) function address  */
+	tramp[6] = 0x7c0803a6;  /*   mtlr    r0   */
+	tramp[7] = 0x7d8903a6;  /*   mtctr   r12  */
+	tramp[8] = 0x816b0004;  /*   lwz     r11,4(r11) static chain  */
+	tramp[9] = 0x4e800420;  /*   bctr  */
+	tramp[2] = (unsigned long) ffi_closure_ASM; /* function  */
+	tramp[3] = (unsigned long) codeloc; /* context  */
+#endif
+	closure->cif = cif;
+	closure->fun = fun;
+	closure->user_data = user_data;
 
-      /* Flush the icache. Only necessary on Darwin.  */
-      flush_range(codeloc, FFI_TRAMPOLINE_SIZE);
+	/* Flush the icache. Only necessary on Darwin.  */
+	flush_range(codeloc, FFI_TRAMPOLINE_SIZE);
 
-      break;
+	break;
 
     case FFI_AIX:
 
@@ -669,10 +1065,10 @@
       closure->cif = cif;
       closure->fun = fun;
       closure->user_data = user_data;
+      break;
 
     default:
-
-      FFI_ASSERT(0);
+      return FFI_BAD_ABI;
       break;
     }
   return FFI_OK;
@@ -708,7 +1104,7 @@
   double d;
 } ffi_dblfl;
 
-int
+ffi_type *
 ffi_closure_helper_DARWIN (ffi_closure *, void *,
 			   unsigned long *, ffi_dblfl *);
 
@@ -719,7 +1115,7 @@
    up space for a return value, ffi_closure_ASM invokes the
    following helper function to do most of the work.  */
 
-int
+ffi_type *
 ffi_closure_helper_DARWIN (ffi_closure *closure, void *rvalue,
 			   unsigned long *pgr, ffi_dblfl *pfr)
 {
@@ -741,16 +1137,32 @@
   ffi_cif *        cif;
   ffi_dblfl *      end_pfr = pfr + NUM_FPR_ARG_REGISTERS;
   unsigned         size_al;
+#if defined(POWERPC_DARWIN64)
+  unsigned 	   fpsused = 0;
+#endif
 
   cif = closure->cif;
   avalue = alloca (cif->nargs * sizeof(void *));
 
-  /* Copy the caller's structure return value address so that the closure
-     returns the data directly to the caller.  */
   if (cif->rtype->type == FFI_TYPE_STRUCT)
     {
+#if defined(POWERPC_DARWIN64)
+      if (!darwin64_struct_ret_by_value_p (cif->rtype))
+	{
+    	  /* Won't fit into the regs - return by ref.  */
+	  rvalue = (void *) *pgr;
+	  pgr++;
+	}
+#elif defined(DARWIN_PPC)
+      if (cif->rtype->size > 4)
+	{
+	  rvalue = (void *) *pgr;
+	  pgr++;
+	}
+#else /* assume we return by ref.  */
       rvalue = (void *) *pgr;
       pgr++;
+#endif
     }
 
   i = 0;
@@ -764,7 +1176,7 @@
 	{
 	case FFI_TYPE_SINT8:
 	case FFI_TYPE_UINT8:
-#ifdef POWERPC64
+#if  defined(POWERPC64)
 	  avalue[i] = (char *) pgr + 7;
 #else
 	  avalue[i] = (char *) pgr + 3;
@@ -774,7 +1186,7 @@
 
 	case FFI_TYPE_SINT16:
 	case FFI_TYPE_UINT16:
-#ifdef POWERPC64
+#if  defined(POWERPC64)
 	  avalue[i] = (char *) pgr + 6;
 #else
 	  avalue[i] = (char *) pgr + 2;
@@ -784,7 +1196,7 @@
 
 	case FFI_TYPE_SINT32:
 	case FFI_TYPE_UINT32:
-#ifdef POWERPC64
+#if  defined(POWERPC64)
 	  avalue[i] = (char *) pgr + 4;
 #else
 	case FFI_TYPE_POINTER:
@@ -794,34 +1206,53 @@
 	  break;
 
 	case FFI_TYPE_STRUCT:
-#ifdef POWERPC64
 	  size_al = arg_types[i]->size;
-	  if (arg_types[i]->elements[0]->type == FFI_TYPE_DOUBLE)
-	    size_al = ALIGN (arg_types[i]->size, 8);
-	  if (size_al < 3 && cif->abi == FFI_DARWIN)
-	    avalue[i] = (void *) pgr + 8 - size_al;
-	  else
-	    avalue[i] = (void *) pgr;
+#if defined(POWERPC_DARWIN64)
+	  pgr = (unsigned long *)ALIGN((char *)pgr, arg_types[i]->alignment);
+	  if (size_al < 3 || size_al == 4)
+	    {
+	      avalue[i] = ((char *)pgr)+8-size_al;
+	      if (arg_types[i]->elements[0]->type == FFI_TYPE_FLOAT
+		  && fpsused < NUM_FPR_ARG_REGISTERS)
+		{
+		  *(float *)pgr = (float) *(double *)pfr;
+		  pfr++;
+		  fpsused++;
+		}
+	    }
+	  else 
+	    {
+	      if (size_al != 16)
+		pfr = (ffi_dblfl *) 
+		    darwin64_struct_floats_to_mem (arg_types[i], (char *)pgr,
+						   (double *)pfr, &fpsused);
+	      avalue[i] = pgr;
+	    }
 	  pgr += (size_al + 7) / 8;
 #else
-	  /* Structures that match the basic modes (QI 1 byte, HI 2 bytes,
-	     SI 4 bytes) are aligned as if they were those modes.  */
-	  size_al = arg_types[i]->size;
 	  /* If the first member of the struct is a double, then align
 	     the struct to double-word.  */
 	  if (arg_types[i]->elements[0]->type == FFI_TYPE_DOUBLE)
 	    size_al = ALIGN(arg_types[i]->size, 8);
+#  if defined(POWERPC64)
+	  FFI_ASSERT (cif->abi != FFI_DARWIN);
+	  avalue[i] = pgr;
+	  pgr += (size_al + 7) / 8;
+#  else
+	  /* Structures that match the basic modes (QI 1 byte, HI 2 bytes,
+	     SI 4 bytes) are aligned as if they were those modes.  */
 	  if (size_al < 3 && cif->abi == FFI_DARWIN)
-	    avalue[i] = (void*) pgr + 4 - size_al;
+	    avalue[i] = (char*) pgr + 4 - size_al;
 	  else
-	    avalue[i] = (void*) pgr;
+	    avalue[i] = pgr;
 	  pgr += (size_al + 3) / 4;
+#  endif
 #endif
 	  break;
 
 	case FFI_TYPE_SINT64:
 	case FFI_TYPE_UINT64:
-#ifdef POWERPC64
+#if  defined(POWERPC64)
 	case FFI_TYPE_POINTER:
 	  avalue[i] = pgr;
 	  pgr++;
@@ -924,5 +1355,5 @@
   (closure->fun) (cif, rvalue, avalue, closure->user_data);
 
   /* Tell ffi_closure_ASM to perform return type promotions.  */
-  return cif->rtype->type;
+  return cif->rtype;
 }
diff --git a/Modules/_ctypes/libffi/src/powerpc/ffitarget.h b/Modules/_ctypes/libffi/src/powerpc/ffitarget.h
index b4f992e..3c9db49 100644
--- a/Modules/_ctypes/libffi/src/powerpc/ffitarget.h
+++ b/Modules/_ctypes/libffi/src/powerpc/ffitarget.h
@@ -1,6 +1,8 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003  Red Hat, Inc.
-   Copyright (C) 2007, 2008 Free Software Foundation, Inc
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (C) 2007, 2008, 2010 Free Software Foundation, Inc
+                 Copyright (c) 1996-2003  Red Hat, Inc.
+
    Target configuration macros for PowerPC.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -28,15 +30,28 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 /* ---- System specific configurations ----------------------------------- */
 
 #if defined (POWERPC) && defined (__powerpc64__)	/* linux64 */
+#ifndef POWERPC64
 #define POWERPC64
-#elif defined (POWERPC_DARWIN) && defined (__ppc64__)	/* Darwin */
+#endif
+#elif defined (POWERPC_DARWIN) && defined (__ppc64__)	/* Darwin64 */
+#ifndef POWERPC64
 #define POWERPC64
+#endif
+#ifndef POWERPC_DARWIN64
+#define POWERPC_DARWIN64
+#endif
 #elif defined (POWERPC_AIX) && defined (__64BIT__)	/* AIX64 */
+#ifndef POWERPC64
 #define POWERPC64
 #endif
+#endif
 
 #ifndef LIBFFI_ASM
 typedef unsigned long          ffi_arg;
@@ -51,18 +66,14 @@
   FFI_LINUX64,
   FFI_LINUX,
   FFI_LINUX_SOFT_FLOAT,
-# ifdef POWERPC64
+# if defined(POWERPC64)
   FFI_DEFAULT_ABI = FFI_LINUX64,
-# else
-#  if (!defined(__NO_FPRS__) && (__LDBL_MANT_DIG__ == 106))
-  FFI_DEFAULT_ABI = FFI_LINUX,
-#  else
-#   ifdef __NO_FPRS__
+# elif defined(__NO_FPRS__)
   FFI_DEFAULT_ABI = FFI_LINUX_SOFT_FLOAT,
-#   else
+# elif (__LDBL_MANT_DIG__ == 106)
+  FFI_DEFAULT_ABI = FFI_LINUX,
+# else
   FFI_DEFAULT_ABI = FFI_GCC_SYSV,
-#   endif
-#  endif
 # endif
 #endif
 
@@ -108,9 +119,13 @@
 #define FFI_SYSV_TYPE_SMALL_STRUCT (FFI_TYPE_LAST + 2)
 
 #if defined(POWERPC64) || defined(POWERPC_AIX)
-#define FFI_TRAMPOLINE_SIZE 24
+#  if defined(POWERPC_DARWIN64)
+#    define FFI_TRAMPOLINE_SIZE 48
+#  else
+#    define FFI_TRAMPOLINE_SIZE 24
+#  endif
 #else /* POWERPC || POWERPC_AIX */
-#define FFI_TRAMPOLINE_SIZE 40
+#  define FFI_TRAMPOLINE_SIZE 40
 #endif
 
 #ifndef LIBFFI_ASM
diff --git a/Modules/_ctypes/libffi/src/powerpc/linux64.S b/Modules/_ctypes/libffi/src/powerpc/linux64.S
index 57b56cb..f28da81 100644
--- a/Modules/_ctypes/libffi/src/powerpc/linux64.S
+++ b/Modules/_ctypes/libffi/src/powerpc/linux64.S
@@ -30,16 +30,25 @@
 #include <ffi.h>
 
 #ifdef __powerpc64__
-	.hidden	ffi_call_LINUX64, .ffi_call_LINUX64
-	.globl	ffi_call_LINUX64, .ffi_call_LINUX64
+	.hidden	ffi_call_LINUX64
+	.globl	ffi_call_LINUX64
 	.section	".opd","aw"
 	.align	3
 ffi_call_LINUX64:
+#ifdef _CALL_LINUX
+	.quad	.L.ffi_call_LINUX64,.TOC.@tocbase,0
+	.type	ffi_call_LINUX64,@function
+	.text
+.L.ffi_call_LINUX64:
+#else
+	.hidden	.ffi_call_LINUX64
+	.globl	.ffi_call_LINUX64
 	.quad	.ffi_call_LINUX64,.TOC.@tocbase,0
 	.size	ffi_call_LINUX64,24
 	.type	.ffi_call_LINUX64,@function
 	.text
 .ffi_call_LINUX64:
+#endif
 .LFB1:
 	mflr	%r0
 	std	%r28, -32(%r1)
@@ -58,7 +67,11 @@
 
 	/* Call ffi_prep_args64.  */
 	mr	%r4, %r1
+#ifdef _CALL_LINUX
+	bl	ffi_prep_args64
+#else
 	bl	.ffi_prep_args64
+#endif
 
 	ld	%r0, 0(%r29)
 	ld	%r2, 8(%r29)
@@ -137,7 +150,11 @@
 .LFE1:
 	.long	0
 	.byte	0,12,0,1,128,4,0,0
+#ifdef _CALL_LINUX
+	.size	ffi_call_LINUX64,.-.L.ffi_call_LINUX64
+#else
 	.size	.ffi_call_LINUX64,.-.ffi_call_LINUX64
+#endif
 
 	.section	.eh_frame,EH_FRAME_FLAGS,@progbits
 .Lframe1:
diff --git a/Modules/_ctypes/libffi/src/powerpc/linux64_closure.S b/Modules/_ctypes/libffi/src/powerpc/linux64_closure.S
index f7aa2c9..b1e1219 100644
--- a/Modules/_ctypes/libffi/src/powerpc/linux64_closure.S
+++ b/Modules/_ctypes/libffi/src/powerpc/linux64_closure.S
@@ -32,16 +32,24 @@
 
 #ifdef __powerpc64__
 	FFI_HIDDEN (ffi_closure_LINUX64)
-	FFI_HIDDEN (.ffi_closure_LINUX64)
-	.globl  ffi_closure_LINUX64, .ffi_closure_LINUX64
+	.globl  ffi_closure_LINUX64
 	.section        ".opd","aw"
 	.align  3
 ffi_closure_LINUX64:
+#ifdef _CALL_LINUX
+	.quad   .L.ffi_closure_LINUX64,.TOC.@tocbase,0
+	.type   ffi_closure_LINUX64,@function
+	.text
+.L.ffi_closure_LINUX64:
+#else
+	FFI_HIDDEN (.ffi_closure_LINUX64)
+	.globl  .ffi_closure_LINUX64
 	.quad   .ffi_closure_LINUX64,.TOC.@tocbase,0
 	.size   ffi_closure_LINUX64,24
 	.type   .ffi_closure_LINUX64,@function
 	.text
 .ffi_closure_LINUX64:
+#endif
 .LFB1:
 	# save general regs into parm save area
 	std	%r3, 48(%r1)
@@ -91,7 +99,11 @@
 	addi %r6, %r1, 128
 
 	# make the call
+#ifdef _CALL_LINUX
+	bl ffi_closure_helper_LINUX64
+#else
 	bl .ffi_closure_helper_LINUX64
+#endif
 .Lret:
 
 	# now r3 contains the return type
@@ -194,7 +206,11 @@
 .LFE1:
 	.long	0
 	.byte	0,12,0,1,128,0,0,0
+#ifdef _CALL_LINUX
+	.size	ffi_closure_LINUX64,.-.L.ffi_closure_LINUX64
+#else
 	.size	.ffi_closure_LINUX64,.-.ffi_closure_LINUX64
+#endif
 
 	.section	.eh_frame,EH_FRAME_FLAGS,@progbits
 .Lframe1:
diff --git a/Modules/_ctypes/libffi/src/powerpc/ppc_closure.S b/Modules/_ctypes/libffi/src/powerpc/ppc_closure.S
index 56f7d1a..41fb885 100644
--- a/Modules/_ctypes/libffi/src/powerpc/ppc_closure.S
+++ b/Modules/_ctypes/libffi/src/powerpc/ppc_closure.S
@@ -122,22 +122,41 @@
 	blr
 
 # case FFI_TYPE_FLOAT
+#ifndef __NO_FPRS__
 	lfs %f1,112+0(%r1)
 	mtlr %r0
 	addi %r1,%r1,144
+#else
+	nop
+	nop
+	nop
+#endif
 	blr
 
 # case FFI_TYPE_DOUBLE
+#ifndef __NO_FPRS__
 	lfd %f1,112+0(%r1)
 	mtlr %r0
 	addi %r1,%r1,144
+#else
+	nop
+	nop
+	nop
+#endif
 	blr
 
 # case FFI_TYPE_LONGDOUBLE
+#ifndef __NO_FPRS__
 	lfd %f1,112+0(%r1)
 	lfd %f2,112+8(%r1)
 	mtlr %r0
 	b .Lfinish
+#else
+	nop
+	nop
+	nop
+	blr
+#endif
 
 # case FFI_TYPE_UINT8
 	lbz %r3,112+3(%r1)
diff --git a/Modules/_ctypes/libffi/src/powerpc/sysv.S b/Modules/_ctypes/libffi/src/powerpc/sysv.S
index 96ea22b..5ee3a19 100644
--- a/Modules/_ctypes/libffi/src/powerpc/sysv.S
+++ b/Modules/_ctypes/libffi/src/powerpc/sysv.S
@@ -83,6 +83,7 @@
 	nop
 1:
 
+#ifndef __NO_FPRS__
 	/* Load all the FP registers.  */
 	bf-	6,2f
 	lfd	%f1,-16-(8*4)-(8*8)(%r28)
@@ -94,6 +95,7 @@
 	lfd	%f6,-16-(8*4)-(3*8)(%r28)
 	lfd	%f7,-16-(8*4)-(2*8)(%r28)
 	lfd	%f8,-16-(8*4)-(1*8)(%r28)
+#endif
 2:
 
 	/* Make the call.  */
@@ -103,7 +105,9 @@
 	mtcrf	0x01,%r31 /* cr7  */
 	bt-	31,L(small_struct_return_value)
 	bt-	30,L(done_return_value)
+#ifndef __NO_FPRS__
 	bt-	29,L(fp_return_value)
+#endif
 	stw	%r3,0(%r30)
 	bf+	28,L(done_return_value)
 	stw	%r4,4(%r30)
@@ -124,6 +128,7 @@
 	lwz	%r1,0(%r1)
 	blr
 
+#ifndef __NO_FPRS__
 L(fp_return_value):
 	bf	28,L(float_return_value)
 	stfd	%f1,0(%r30)
@@ -134,6 +139,7 @@
 L(float_return_value):
 	stfs	%f1,0(%r30)
 	b	L(done_return_value)
+#endif
 
 L(small_struct_return_value):
 	extrwi	%r6,%r31,2,19         /* number of bytes padding = shift/8 */
diff --git a/Modules/_ctypes/libffi/src/prep_cif.c b/Modules/_ctypes/libffi/src/prep_cif.c
index c1c3b9a..e8ec5cf 100644
--- a/Modules/_ctypes/libffi/src/prep_cif.c
+++ b/Modules/_ctypes/libffi/src/prep_cif.c
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------------
-   prep_cif.c - Copyright (c) 1996, 1998, 2007  Red Hat, Inc.
+   prep_cif.c - Copyright (c) 2011, 2012  Anthony Green
+                Copyright (c) 1996, 1998, 2007  Red Hat, Inc.
 
    Permission is hereby granted, free of charge, to any person obtaining
    a copy of this software and associated documentation files (the
@@ -37,17 +38,21 @@
 {
   ffi_type **ptr;
 
-  FFI_ASSERT(arg != NULL);
+  if (UNLIKELY(arg == NULL || arg->elements == NULL))
+    return FFI_BAD_TYPEDEF;
 
-  FFI_ASSERT(arg->elements != NULL);
-  FFI_ASSERT(arg->size == 0);
-  FFI_ASSERT(arg->alignment == 0);
+  arg->size = 0;
+  arg->alignment = 0;
 
   ptr = &(arg->elements[0]);
 
+  if (UNLIKELY(ptr == 0))
+    return FFI_BAD_TYPEDEF;
+
   while ((*ptr) != NULL)
     {
-      if (((*ptr)->size == 0) && (initialize_aggregate((*ptr)) != FFI_OK))
+      if (UNLIKELY(((*ptr)->size == 0)
+		    && (initialize_aggregate((*ptr)) != FFI_OK)))
 	return FFI_BAD_TYPEDEF;
 
       /* Perform a sanity check on the argument type */
@@ -85,19 +90,38 @@
 /* Perform machine independent ffi_cif preparation, then call
    machine dependent routine. */
 
-ffi_status ffi_prep_cif(ffi_cif *cif, ffi_abi abi, unsigned int nargs,
-			ffi_type *rtype, ffi_type **atypes)
+/* For non variadic functions isvariadic should be 0 and
+   nfixedargs==ntotalargs.
+
+   For variadic calls, isvariadic should be 1 and nfixedargs
+   and ntotalargs set as appropriate. nfixedargs must always be >=1 */
+
+
+ffi_status FFI_HIDDEN ffi_prep_cif_core(ffi_cif *cif, ffi_abi abi,
+			     unsigned int isvariadic,
+                             unsigned int nfixedargs,
+                             unsigned int ntotalargs,
+			     ffi_type *rtype, ffi_type **atypes)
 {
   unsigned bytes = 0;
   unsigned int i;
   ffi_type **ptr;
 
   FFI_ASSERT(cif != NULL);
-  FFI_ASSERT((abi > FFI_FIRST_ABI) && (abi <= FFI_DEFAULT_ABI));
+  FFI_ASSERT((!isvariadic) || (nfixedargs >= 1));
+  FFI_ASSERT(nfixedargs <= ntotalargs);
+
+#ifndef X86_WIN32
+  if (! (abi > FFI_FIRST_ABI && abi < FFI_LAST_ABI))
+    return FFI_BAD_ABI;
+#else
+  if (! (abi > FFI_FIRST_ABI && abi < FFI_LAST_ABI || abi == FFI_THISCALL))
+    return FFI_BAD_ABI;
+#endif
 
   cif->abi = abi;
   cif->arg_types = atypes;
-  cif->nargs = nargs;
+  cif->nargs = ntotalargs;
   cif->rtype = rtype;
 
   cif->flags = 0;
@@ -110,12 +134,19 @@
   FFI_ASSERT_VALID_TYPE(cif->rtype);
 
   /* x86, x86-64 and s390 stack space allocation is handled in prep_machdep. */
-#if !defined M68K && !defined __i386__ && !defined __x86_64__ && !defined S390 && !defined PA
+#if !defined M68K && !defined X86_ANY && !defined S390 && !defined PA
   /* Make space for the return structure pointer */
   if (cif->rtype->type == FFI_TYPE_STRUCT
 #ifdef SPARC
       && (cif->abi != FFI_V9 || cif->rtype->size > 32)
 #endif
+#ifdef TILE
+      && (cif->rtype->size > 10 * FFI_SIZEOF_ARG)
+#endif
+#ifdef XTENSA
+      && (cif->rtype->size > 16)
+#endif
+
      )
     bytes = STACK_ARG_SIZE(sizeof(void*));
 #endif
@@ -131,7 +162,7 @@
 	 check after the initialization.  */
       FFI_ASSERT_VALID_TYPE(*ptr);
 
-#if !defined __i386__ && !defined __x86_64__ && !defined S390 && !defined PA
+#if !defined X86_ANY && !defined S390 && !defined PA
 #ifdef SPARC
       if (((*ptr)->type == FFI_TYPE_STRUCT
 	   && ((*ptr)->size > 16 || cif->abi != FFI_V9))
@@ -145,6 +176,20 @@
 	  if (((*ptr)->alignment - 1) & bytes)
 	    bytes = ALIGN(bytes, (*ptr)->alignment);
 
+#ifdef TILE
+	  if (bytes < 10 * FFI_SIZEOF_ARG &&
+	      bytes + STACK_ARG_SIZE((*ptr)->size) > 10 * FFI_SIZEOF_ARG)
+	    {
+	      /* An argument is never split between the 10 parameter
+		 registers and the stack.  */
+	      bytes = 10 * FFI_SIZEOF_ARG;
+	    }
+#endif
+#ifdef XTENSA
+	  if (bytes <= 6*4 && bytes + STACK_ARG_SIZE((*ptr)->size) > 6*4)
+	    bytes = 6*4;
+#endif
+
 	  bytes += STACK_ARG_SIZE((*ptr)->size);
 	}
 #endif
@@ -153,10 +198,31 @@
   cif->bytes = bytes;
 
   /* Perform machine dependent cif processing */
+#ifdef FFI_TARGET_SPECIFIC_VARIADIC
+  if (isvariadic)
+	return ffi_prep_cif_machdep_var(cif, nfixedargs, ntotalargs);
+#endif
+
   return ffi_prep_cif_machdep(cif);
 }
 #endif /* not __CRIS__ */
 
+ffi_status ffi_prep_cif(ffi_cif *cif, ffi_abi abi, unsigned int nargs,
+			     ffi_type *rtype, ffi_type **atypes)
+{
+  return ffi_prep_cif_core(cif, abi, 0, nargs, nargs, rtype, atypes);
+}
+
+ffi_status ffi_prep_cif_var(ffi_cif *cif,
+                            ffi_abi abi,
+                            unsigned int nfixedargs,
+                            unsigned int ntotalargs,
+                            ffi_type *rtype,
+                            ffi_type **atypes)
+{
+  return ffi_prep_cif_core(cif, abi, 1, nfixedargs, ntotalargs, rtype, atypes);
+}
+
 #if FFI_CLOSURES
 
 ffi_status
diff --git a/Modules/_ctypes/libffi/src/s390/ffi.c b/Modules/_ctypes/libffi/src/s390/ffi.c
index ca2675b..8adb5bc 100644
--- a/Modules/_ctypes/libffi/src/s390/ffi.c
+++ b/Modules/_ctypes/libffi/src/s390/ffi.c
@@ -750,7 +750,8 @@
 		      void *user_data,
 		      void *codeloc)
 {
-  FFI_ASSERT (cif->abi == FFI_SYSV);
+  if (cif->abi != FFI_SYSV)
+    return FFI_BAD_ABI;
 
 #ifndef __s390x__
   *(short *)&closure->tramp [0] = 0x0d10;   /* basr %r1,0 */
diff --git a/Modules/_ctypes/libffi/src/s390/ffitarget.h b/Modules/_ctypes/libffi/src/s390/ffitarget.h
index 78f3c65..97fa5c4 100644
--- a/Modules/_ctypes/libffi/src/s390/ffitarget.h
+++ b/Modules/_ctypes/libffi/src/s390/ffitarget.h
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003  Red Hat, Inc.
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 1996-2003  Red Hat, Inc.
    Target configuration macros for S390.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -27,9 +28,15 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 #if defined (__s390x__)
+#ifndef S390X
 #define S390X
 #endif
+#endif
 
 /* ---- System specific configurations ----------------------------------- */
 
@@ -40,8 +47,8 @@
 typedef enum ffi_abi {
   FFI_FIRST_ABI = 0,
   FFI_SYSV,
-  FFI_DEFAULT_ABI = FFI_SYSV,
-  FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
+  FFI_LAST_ABI,
+  FFI_DEFAULT_ABI = FFI_SYSV
 } ffi_abi;
 #endif
 
diff --git a/Modules/_ctypes/libffi/src/sh/ffi.c b/Modules/_ctypes/libffi/src/sh/ffi.c
index 69bd025..3515b91 100644
--- a/Modules/_ctypes/libffi/src/sh/ffi.c
+++ b/Modules/_ctypes/libffi/src/sh/ffi.c
@@ -1,5 +1,5 @@
 /* -----------------------------------------------------------------------
-   ffi.c - Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, 2008 Kaz Kojima
+   ffi.c - Copyright (c) 2002-2008, 2012 Kaz Kojima
            Copyright (c) 2008 Red Hat, Inc.
    
    SuperH Foreign Function Interface 
@@ -463,7 +463,8 @@
   unsigned int *tramp;
   unsigned int insn;
 
-  FFI_ASSERT (cif->abi == FFI_GCC_SYSV);
+  if (cif->abi != FFI_SYSV)
+    return FFI_BAD_ABI;
 
   tramp = (unsigned int *) &closure->tramp[0];
   /* Set T bit if the function returns a struct pointed with R2.  */
diff --git a/Modules/_ctypes/libffi/src/sh/ffitarget.h b/Modules/_ctypes/libffi/src/sh/ffitarget.h
index 218ae3d..a36bf42 100644
--- a/Modules/_ctypes/libffi/src/sh/ffitarget.h
+++ b/Modules/_ctypes/libffi/src/sh/ffitarget.h
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003  Red Hat, Inc.
+   ffitarget.h - Copyright (c) 2012 Anthony Green
+                 Copyright (c) 1996-2003  Red Hat, Inc.
    Target configuration macros for SuperH.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -27,6 +28,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 /* ---- Generic type definitions ----------------------------------------- */
 
 #ifndef LIBFFI_ASM
@@ -36,8 +41,8 @@
 typedef enum ffi_abi {
   FFI_FIRST_ABI = 0,
   FFI_SYSV,
-  FFI_DEFAULT_ABI = FFI_SYSV,
-  FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
+  FFI_LAST_ABI,
+  FFI_DEFAULT_ABI = FFI_SYSV
 } ffi_abi;
 #endif
 
diff --git a/Modules/_ctypes/libffi/src/sh64/ffi.c b/Modules/_ctypes/libffi/src/sh64/ffi.c
index 8fbc05c..123b87a 100644
--- a/Modules/_ctypes/libffi/src/sh64/ffi.c
+++ b/Modules/_ctypes/libffi/src/sh64/ffi.c
@@ -1,5 +1,5 @@
 /* -----------------------------------------------------------------------
-   ffi.c - Copyright (c) 2003, 2004, 2006, 2007 Kaz Kojima
+   ffi.c - Copyright (c) 2003, 2004, 2006, 2007, 2012 Kaz Kojima
            Copyright (c) 2008 Anthony Green
    
    SuperH SHmedia Foreign Function Interface 
@@ -302,7 +302,8 @@
 {
   unsigned int *tramp;
 
-  FFI_ASSERT (cif->abi == FFI_GCC_SYSV);
+  if (cif->abi != FFI_SYSV)
+    return FFI_BAD_ABI;
 
   tramp = (unsigned int *) &closure->tramp[0];
   /* Since ffi_closure is an aligned object, the ffi trampoline is
diff --git a/Modules/_ctypes/libffi/src/sh64/ffitarget.h b/Modules/_ctypes/libffi/src/sh64/ffitarget.h
index 4e922fc..08a6fe9 100644
--- a/Modules/_ctypes/libffi/src/sh64/ffitarget.h
+++ b/Modules/_ctypes/libffi/src/sh64/ffitarget.h
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003  Red Hat, Inc.
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 1996-2003  Red Hat, Inc.
    Target configuration macros for SuperH - SHmedia.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -27,6 +28,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 /* ---- Generic type definitions ----------------------------------------- */
 
 #ifndef LIBFFI_ASM
@@ -36,8 +41,8 @@
 typedef enum ffi_abi {
   FFI_FIRST_ABI = 0,
   FFI_SYSV,
-  FFI_DEFAULT_ABI = FFI_SYSV,
-  FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
+  FFI_LAST_ABI,
+  FFI_DEFAULT_ABI = FFI_SYSV
 } ffi_abi;
 
 #define FFI_EXTRA_CIF_FIELDS long long flags2
diff --git a/Modules/_ctypes/libffi/src/sparc/ffi.c b/Modules/_ctypes/libffi/src/sparc/ffi.c
index 1d01f59..9f0fded 100644
--- a/Modules/_ctypes/libffi/src/sparc/ffi.c
+++ b/Modules/_ctypes/libffi/src/sparc/ffi.c
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------------
-   ffi.c - Copyright (c) 1996, 2003, 2004, 2007, 2008 Red Hat, Inc.
+   ffi.c - Copyright (c) 2011, 2013 Anthony Green
+           Copyright (c) 1996, 2003-2004, 2007-2008 Red Hat, Inc.
    
    SPARC Foreign Function Interface 
 
@@ -375,6 +376,10 @@
 		       unsigned, unsigned *, void (*fn)(void));
 #endif
 
+#ifndef __GNUC__
+void ffi_flush_icache (void *, size_t);
+#endif
+
 void ffi_call(ffi_cif *cif, void (*fn)(void), void *rvalue, void **avalue)
 {
   extended_cif ecif;
@@ -406,8 +411,54 @@
       /* We don't yet support calling 32bit code from 64bit */
       FFI_ASSERT(0);
 #else
-      ffi_call_v8(ffi_prep_args_v8, &ecif, cif->bytes, 
-		  cif->flags, rvalue, fn);
+      if (rvalue && (cif->rtype->type == FFI_TYPE_STRUCT
+#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
+	  || cif->flags == FFI_TYPE_LONGDOUBLE
+#endif
+	  ))
+	{
+	  /* For v8, we need an "unimp" with size of returning struct */
+	  /* behind "call", so we alloc some executable space for it. */
+	  /* l7 is used, we need to make sure v8.S doesn't use %l7.   */
+	  unsigned int *call_struct = NULL;
+	  ffi_closure_alloc(32, (void **)&call_struct);
+	  if (call_struct)
+	    {
+	      unsigned long f = (unsigned long)fn;
+	      call_struct[0] = 0xae10001f;		 /* mov   %i7, %l7	 */
+	      call_struct[1] = 0xbe10000f;		 /* mov   %o7, %i7	 */
+	      call_struct[2] = 0x03000000 | f >> 10;     /* sethi %hi(fn), %g1	 */
+	      call_struct[3] = 0x9fc06000 | (f & 0x3ff); /* jmp %g1+%lo(fn), %o7 */
+	      call_struct[4] = 0x01000000;		 /* nop			 */
+	      if (cif->rtype->size < 0x7f)
+		call_struct[5] = cif->rtype->size;	 /* unimp		 */
+	      else
+		call_struct[5] = 0x01000000;	     	 /* nop			 */
+	      call_struct[6] = 0x81c7e008;		 /* ret			 */
+	      call_struct[7] = 0xbe100017;		 /* mov   %l7, %i7	 */
+#ifdef __GNUC__
+	      asm volatile ("iflush %0; iflush %0+8; iflush %0+16; iflush %0+24" : :
+			    "r" (call_struct) : "memory");
+	      /* SPARC v8 requires 5 instructions for flush to be visible */
+	      asm volatile ("nop; nop; nop; nop; nop");
+#else
+	      ffi_flush_icache (call_struct, 32);
+#endif
+	      ffi_call_v8(ffi_prep_args_v8, &ecif, cif->bytes,
+			  cif->flags, rvalue, call_struct);
+	      ffi_closure_free(call_struct);
+	    }
+	  else
+	    {
+	      ffi_call_v8(ffi_prep_args_v8, &ecif, cif->bytes,
+			  cif->flags, rvalue, fn);
+	    }
+	}
+      else
+	{
+	  ffi_call_v8(ffi_prep_args_v8, &ecif, cif->bytes,
+		      cif->flags, rvalue, fn);
+	}
 #endif
       break;
     case FFI_V9:
@@ -425,7 +476,6 @@
       FFI_ASSERT(0);
       break;
     }
-
 }
 
 
@@ -447,7 +497,8 @@
 #ifdef SPARC64
   /* Trampoline address is equal to the closure address.  We take advantage
      of that to reduce the trampoline size by 8 bytes. */
-  FFI_ASSERT (cif->abi == FFI_V9);
+  if (cif->abi != FFI_V9)
+    return FFI_BAD_ABI;
   fn = (unsigned long) ffi_closure_v9;
   tramp[0] = 0x83414000;	/* rd	%pc, %g1	*/
   tramp[1] = 0xca586010;	/* ldx	[%g1+16], %g5	*/
@@ -456,7 +507,8 @@
   *((unsigned long *) &tramp[4]) = fn;
 #else
   unsigned long ctx = (unsigned long) codeloc;
-  FFI_ASSERT (cif->abi == FFI_V8);
+  if (cif->abi != FFI_V8)
+    return FFI_BAD_ABI;
   fn = (unsigned long) ffi_closure_v8;
   tramp[0] = 0x03000000 | fn >> 10;	/* sethi %hi(fn), %g1	*/
   tramp[1] = 0x05000000 | ctx >> 10;	/* sethi %hi(ctx), %g2	*/
@@ -468,13 +520,17 @@
   closure->fun = fun;
   closure->user_data = user_data;
 
-  /* Flush the Icache.  FIXME: alignment isn't certain, assume 8 bytes */
+  /* Flush the Icache.  closure is 8 bytes aligned.  */
+#ifdef __GNUC__
 #ifdef SPARC64
-  asm volatile ("flush	%0" : : "r" (closure) : "memory");
-  asm volatile ("flush	%0" : : "r" (((char *) closure) + 8) : "memory");
+  asm volatile ("flush	%0; flush %0+8" : : "r" (closure) : "memory");
 #else
-  asm volatile ("iflush	%0" : : "r" (closure) : "memory");
-  asm volatile ("iflush	%0" : : "r" (((char *) closure) + 8) : "memory");
+  asm volatile ("iflush	%0; iflush %0+8" : : "r" (closure) : "memory");
+  /* SPARC v8 requires 5 instructions for flush to be visible */
+  asm volatile ("nop; nop; nop; nop; nop");
+#endif
+#else
+  ffi_flush_icache (closure, 16);
 #endif
 
   return FFI_OK;
diff --git a/Modules/_ctypes/libffi/src/sparc/ffitarget.h b/Modules/_ctypes/libffi/src/sparc/ffitarget.h
index 1a1a1ac..d89f787 100644
--- a/Modules/_ctypes/libffi/src/sparc/ffitarget.h
+++ b/Modules/_ctypes/libffi/src/sparc/ffitarget.h
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003  Red Hat, Inc.
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 1996-2003  Red Hat, Inc.
    Target configuration macros for SPARC.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -27,11 +28,17 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 /* ---- System specific configurations ----------------------------------- */
 
 #if defined(__arch64__) || defined(__sparcv9)
+#ifndef SPARC64
 #define SPARC64
 #endif
+#endif
 
 #ifndef LIBFFI_ASM
 typedef unsigned long          ffi_arg;
@@ -42,12 +49,12 @@
   FFI_V8,
   FFI_V8PLUS,
   FFI_V9,
+  FFI_LAST_ABI,
 #ifdef SPARC64
-  FFI_DEFAULT_ABI = FFI_V9,
+  FFI_DEFAULT_ABI = FFI_V9
 #else
-  FFI_DEFAULT_ABI = FFI_V8,
+  FFI_DEFAULT_ABI = FFI_V8
 #endif
-  FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
 } ffi_abi;
 #endif
 
diff --git a/Modules/_ctypes/libffi/src/sparc/v8.S b/Modules/_ctypes/libffi/src/sparc/v8.S
index bef1b68..6bf7ac0 100644
--- a/Modules/_ctypes/libffi/src/sparc/v8.S
+++ b/Modules/_ctypes/libffi/src/sparc/v8.S
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------------
-   v8.S - Copyright (c) 1996, 1997, 2003, 2004, 2008 Red Hat, Inc.
+   v8.S - Copyright (c) 2013  The Written Word, Inc.
+	  Copyright (c) 1996, 1997, 2003, 2004, 2008  Red Hat, Inc.
    
    SPARC Foreign Function Interface 
 
@@ -31,11 +32,39 @@
 #define STACKFRAME 96		/* Minimum stack framesize for SPARC */
 #define ARGS (64+4)		/* Offset of register area in frame */
 
-.text
+#ifndef __GNUC__	
+	.text
+        .align 8
+.globl ffi_flush_icache
+.globl _ffi_flush_icache
+
+ffi_flush_icache:
+_ffi_flush_icache:	
+        add %o0, %o1, %o2
+#ifdef SPARC64	
+1:	flush %o0
+#else	
+1:	iflush %o0
+#endif
+	add %o0, 8, %o0
+	cmp %o0, %o2
+	blt 1b
+	nop
+	nop
+	nop
+	nop
+	nop
+	retl
+	nop
+.ffi_flush_icache_end:
+	.size	ffi_flush_icache,.ffi_flush_icache_end-ffi_flush_icache
+#endif
+
+	.text
         .align 8
 .globl ffi_call_v8
 .globl _ffi_call_v8
-
+	
 ffi_call_v8:
 _ffi_call_v8:
 .LLFB1:
diff --git a/Modules/_ctypes/libffi/src/sparc/v9.S b/Modules/_ctypes/libffi/src/sparc/v9.S
index 489ff02..bf31a2b 100644
--- a/Modules/_ctypes/libffi/src/sparc/v9.S
+++ b/Modules/_ctypes/libffi/src/sparc/v9.S
@@ -32,7 +32,7 @@
 /* Only compile this in for 64bit builds, because otherwise the object file
    will have inproper architecture due to used instructions.  */
 
-#define STACKFRAME 128		/* Minimum stack framesize for SPARC */
+#define STACKFRAME 176		/* Minimum stack framesize for SPARC 64-bit */
 #define STACK_BIAS 2047
 #define ARGS (128)		/* Offset of register area in frame */
 
diff --git a/Modules/_ctypes/libffi/src/tile/ffi.c b/Modules/_ctypes/libffi/src/tile/ffi.c
new file mode 100644
index 0000000..3a94469
--- /dev/null
+++ b/Modules/_ctypes/libffi/src/tile/ffi.c
@@ -0,0 +1,355 @@
+/* -----------------------------------------------------------------------
+   ffi.c - Copyright (c) 2012 Tilera Corp.
+
+   TILE Foreign Function Interface
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   ``Software''), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+   NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+   HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+   WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+   OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+   DEALINGS IN THE SOFTWARE.
+   ----------------------------------------------------------------------- */
+
+#include <ffi.h>
+#include <ffi_common.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <unistd.h>
+#include <arch/abi.h>
+#include <arch/icache.h>
+#include <arch/opcode.h>
+
+
+/* The first 10 registers are used to pass arguments and return values. */
+#define NUM_ARG_REGS 10
+
+/* Performs a raw function call with the given NUM_ARG_REGS register arguments
+   and the specified additional stack arguments (if any). */
+extern void ffi_call_tile(ffi_sarg reg_args[NUM_ARG_REGS],
+                          const ffi_sarg *stack_args,
+                          size_t stack_args_bytes,
+                          void (*fnaddr)(void))
+  FFI_HIDDEN;
+
+/* This handles the raw call from the closure stub, cleaning up the
+   parameters and delegating to ffi_closure_tile_inner. */
+extern void ffi_closure_tile(void) FFI_HIDDEN;
+
+
+ffi_status
+ffi_prep_cif_machdep(ffi_cif *cif)
+{
+  /* We always allocate room for all registers. Even if we don't
+     use them as parameters, they get returned in the same array
+     as struct return values so we need to make room. */
+  if (cif->bytes < NUM_ARG_REGS * FFI_SIZEOF_ARG)
+    cif->bytes = NUM_ARG_REGS * FFI_SIZEOF_ARG;
+
+  if (cif->rtype->size > NUM_ARG_REGS * FFI_SIZEOF_ARG)
+    cif->flags = FFI_TYPE_STRUCT;
+  else
+    cif->flags = FFI_TYPE_INT;
+
+  /* Nothing to do. */
+  return FFI_OK;
+}
+
+
+static long
+assign_to_ffi_arg(ffi_sarg *out, void *in, const ffi_type *type,
+                  int write_to_reg)
+{
+  switch (type->type)
+    {
+    case FFI_TYPE_SINT8:
+      *out = *(SINT8 *)in;
+      return 1;
+
+    case FFI_TYPE_UINT8:
+      *out = *(UINT8 *)in;
+      return 1;
+
+    case FFI_TYPE_SINT16:
+      *out = *(SINT16 *)in;
+      return 1;
+
+    case FFI_TYPE_UINT16:
+      *out = *(UINT16 *)in;
+      return 1;
+
+    case FFI_TYPE_SINT32:
+    case FFI_TYPE_UINT32:
+#ifndef __LP64__
+    case FFI_TYPE_POINTER:
+#endif
+      /* Note that even unsigned 32-bit quantities are sign extended
+         on tilegx when stored in a register.  */
+      *out = *(SINT32 *)in;
+      return 1;
+
+    case FFI_TYPE_FLOAT:
+#ifdef __tilegx__
+      if (write_to_reg)
+        {
+          /* Properly sign extend the value.  */
+          union { float f; SINT32 s32; } val;
+          val.f = *(float *)in;
+          *out = val.s32;
+        }
+      else
+#endif
+        {
+          *(float *)out = *(float *)in;
+        }
+      return 1;
+
+    case FFI_TYPE_SINT64:
+    case FFI_TYPE_UINT64:
+    case FFI_TYPE_DOUBLE:
+#ifdef __LP64__
+    case FFI_TYPE_POINTER:
+#endif
+      *(UINT64 *)out = *(UINT64 *)in;
+      return sizeof(UINT64) / FFI_SIZEOF_ARG;
+
+    case FFI_TYPE_STRUCT:
+      memcpy(out, in, type->size);
+      return (type->size + FFI_SIZEOF_ARG - 1) / FFI_SIZEOF_ARG;
+
+    case FFI_TYPE_VOID:
+      /* Must be a return type. Nothing to do. */
+      return 0;
+
+    default:
+      FFI_ASSERT(0);
+      return -1;
+    }
+}
+
+
+void
+ffi_call(ffi_cif *cif, void (*fn)(void), void *rvalue, void **avalue)
+{
+  ffi_sarg * const arg_mem = alloca(cif->bytes);
+  ffi_sarg * const reg_args = arg_mem;
+  ffi_sarg * const stack_args = &reg_args[NUM_ARG_REGS];
+  ffi_sarg *argp = arg_mem;
+  ffi_type ** const arg_types = cif->arg_types;
+  const long num_args = cif->nargs;
+  long i;
+
+  if (cif->flags == FFI_TYPE_STRUCT)
+    {
+      /* Pass a hidden pointer to the return value. We make sure there
+         is scratch space for the callee to store the return value even if
+         our caller doesn't care about it. */
+      *argp++ = (intptr_t)(rvalue ? rvalue : alloca(cif->rtype->size));
+
+      /* No more work needed to return anything. */
+      rvalue = NULL;
+    }
+
+  for (i = 0; i < num_args; i++)
+    {
+      ffi_type *type = arg_types[i];
+      void * const arg_in = avalue[i];
+      ptrdiff_t arg_word = argp - arg_mem;
+
+#ifndef __tilegx__
+      /* Doubleword-aligned values are always in an even-number register
+         pair, or doubleword-aligned stack slot if out of registers. */
+      long align = arg_word & (type->alignment > FFI_SIZEOF_ARG);
+      argp += align;
+      arg_word += align;
+#endif
+
+      if (type->type == FFI_TYPE_STRUCT)
+        {
+          const size_t arg_size_in_words =
+            (type->size + FFI_SIZEOF_ARG - 1) / FFI_SIZEOF_ARG;
+
+          if (arg_word < NUM_ARG_REGS &&
+              arg_word + arg_size_in_words > NUM_ARG_REGS)
+            {
+              /* Args are not allowed to span registers and the stack. */
+              argp = stack_args;
+            }
+
+          memcpy(argp, arg_in, type->size);
+          argp += arg_size_in_words;
+        }
+      else
+        {
+          argp += assign_to_ffi_arg(argp, arg_in, arg_types[i], 1);
+        }
+    }
+
+  /* Actually do the call. */
+  ffi_call_tile(reg_args, stack_args,
+                cif->bytes - (NUM_ARG_REGS * FFI_SIZEOF_ARG), fn);
+
+  if (rvalue != NULL)
+    assign_to_ffi_arg(rvalue, reg_args, cif->rtype, 0);
+}
+
+
+/* Template code for closure. */
+extern const UINT64 ffi_template_tramp_tile[] FFI_HIDDEN;
+
+
+ffi_status
+ffi_prep_closure_loc (ffi_closure *closure,
+                      ffi_cif *cif,
+                      void (*fun)(ffi_cif*, void*, void**, void*),
+                      void *user_data,
+                      void *codeloc)
+{
+#ifdef __tilegx__
+  /* TILE-Gx */
+  SINT64 c;
+  SINT64 h;
+  int s;
+  UINT64 *out;
+
+  if (cif->abi != FFI_UNIX)
+    return FFI_BAD_ABI;
+
+  out = (UINT64 *)closure->tramp;
+
+  c = (intptr_t)closure;
+  h = (intptr_t)ffi_closure_tile;
+  s = 0;
+
+  /* Find the smallest shift count that doesn't lose information
+     (i.e. no need to explicitly insert high bits of the address that
+     are just the sign extension of the low bits). */
+  while ((c >> s) != (SINT16)(c >> s) || (h >> s) != (SINT16)(h >> s))
+    s += 16;
+
+#define OPS(a, b, shift) \
+  (create_Imm16_X0((a) >> (shift)) | create_Imm16_X1((b) >> (shift)))
+
+  /* Emit the moveli. */
+  *out++ = ffi_template_tramp_tile[0] | OPS(c, h, s);
+  for (s -= 16; s >= 0; s -= 16)
+    *out++ = ffi_template_tramp_tile[1] | OPS(c, h, s);
+
+#undef OPS
+
+  *out++ = ffi_template_tramp_tile[2];
+
+#else
+  /* TILEPro */
+  UINT64 *out;
+  intptr_t delta;
+
+  if (cif->abi != FFI_UNIX)
+    return FFI_BAD_ABI;
+
+  out = (UINT64 *)closure->tramp;
+  delta = (intptr_t)ffi_closure_tile - (intptr_t)codeloc;
+
+  *out++ = ffi_template_tramp_tile[0] | create_JOffLong_X1(delta >> 3);
+#endif
+
+  closure->cif = cif;
+  closure->fun = fun;
+  closure->user_data = user_data;
+
+  invalidate_icache(closure->tramp, (char *)out - closure->tramp,
+                    getpagesize());
+
+  return FFI_OK;
+}
+
+
+/* This is called by the assembly wrapper for closures. This does
+   all of the work. On entry reg_args[0] holds the values the registers
+   had when the closure was invoked. On return reg_args[1] holds the register
+   values to be returned to the caller (many of which may be garbage). */
+void FFI_HIDDEN
+ffi_closure_tile_inner(ffi_closure *closure,
+                       ffi_sarg reg_args[2][NUM_ARG_REGS],
+                       ffi_sarg *stack_args)
+{
+  ffi_cif * const cif = closure->cif;
+  void ** const avalue = alloca(cif->nargs * sizeof(void *));
+  void *rvalue;
+  ffi_type ** const arg_types = cif->arg_types;
+  ffi_sarg * const reg_args_in = reg_args[0];
+  ffi_sarg * const reg_args_out = reg_args[1];
+  ffi_sarg * argp;
+  long i, arg_word, nargs = cif->nargs;
+  /* Use a union to guarantee proper alignment for double. */
+  union { ffi_sarg arg[NUM_ARG_REGS]; double d; UINT64 u64; } closure_ret;
+
+  /* Start out reading register arguments. */
+  argp = reg_args_in;
+
+  /* Copy the caller's structure return address to that the closure
+     returns the data directly to the caller.  */
+  if (cif->flags == FFI_TYPE_STRUCT)
+    {
+      /* Return by reference via hidden pointer. */
+      rvalue = (void *)(intptr_t)*argp++;
+      arg_word = 1;
+    }
+  else
+    {
+      /* Return the value in registers. */
+      rvalue = &closure_ret;
+      arg_word = 0;
+    }
+
+  /* Grab the addresses of the arguments. */
+  for (i = 0; i < nargs; i++)
+    {
+      ffi_type * const type = arg_types[i];
+      const size_t arg_size_in_words =
+        (type->size + FFI_SIZEOF_ARG - 1) / FFI_SIZEOF_ARG;
+
+#ifndef __tilegx__
+      /* Doubleword-aligned values are always in an even-number register
+         pair, or doubleword-aligned stack slot if out of registers. */
+      long align = arg_word & (type->alignment > FFI_SIZEOF_ARG);
+      argp += align;
+      arg_word += align;
+#endif
+
+      if (arg_word == NUM_ARG_REGS ||
+          (arg_word < NUM_ARG_REGS &&
+           arg_word + arg_size_in_words > NUM_ARG_REGS))
+        {
+          /* Switch to reading arguments from the stack. */
+          argp = stack_args;
+          arg_word = NUM_ARG_REGS;
+        }
+
+      avalue[i] = argp;
+      argp += arg_size_in_words;
+      arg_word += arg_size_in_words;
+    }
+
+  /* Invoke the closure.  */
+  closure->fun(cif, rvalue, avalue, closure->user_data);
+
+  if (cif->flags != FFI_TYPE_STRUCT)
+    {
+      /* Canonicalize for register representation. */
+      assign_to_ffi_arg(reg_args_out, &closure_ret, cif->rtype, 1);
+    }
+}
diff --git a/Modules/_ctypes/libffi/src/tile/ffitarget.h b/Modules/_ctypes/libffi/src/tile/ffitarget.h
new file mode 100644
index 0000000..679fb5d
--- /dev/null
+++ b/Modules/_ctypes/libffi/src/tile/ffitarget.h
@@ -0,0 +1,65 @@
+/* -----------------------------------------------------------------*-C-*-
+   ffitarget.h - Copyright (c) 2012 Tilera Corp.
+   Target configuration macros for TILE.
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   ``Software''), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+   NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+   HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+   WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+   OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+   DEALINGS IN THE SOFTWARE.
+   ----------------------------------------------------------------------- */
+
+#ifndef LIBFFI_TARGET_H
+#define LIBFFI_TARGET_H
+
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
+#ifndef LIBFFI_ASM
+
+#include <arch/abi.h>
+
+typedef uint_reg_t ffi_arg;
+typedef int_reg_t  ffi_sarg;
+
+typedef enum ffi_abi {
+  FFI_FIRST_ABI = 0,
+  FFI_UNIX,
+  FFI_LAST_ABI,
+  FFI_DEFAULT_ABI = FFI_UNIX
+} ffi_abi;
+#endif
+
+/* ---- Definitions for closures ----------------------------------------- */
+#define FFI_CLOSURES 1
+
+#ifdef __tilegx__
+/* We always pass 8-byte values, even in -m32 mode. */
+# define FFI_SIZEOF_ARG 8
+# ifdef __LP64__
+#  define FFI_TRAMPOLINE_SIZE (8 * 5)  /* 5 bundles */
+# else
+#  define FFI_TRAMPOLINE_SIZE (8 * 3)  /* 3 bundles */
+# endif
+#else
+# define FFI_SIZEOF_ARG 4
+# define FFI_TRAMPOLINE_SIZE 8 /* 1 bundle */
+#endif
+#define FFI_NATIVE_RAW_API 0
+
+#endif
diff --git a/Modules/_ctypes/libffi/src/tile/tile.S b/Modules/_ctypes/libffi/src/tile/tile.S
new file mode 100644
index 0000000..a186e1f
--- /dev/null
+++ b/Modules/_ctypes/libffi/src/tile/tile.S
@@ -0,0 +1,360 @@
+/* -----------------------------------------------------------------------
+   tile.S - Copyright (c) 2011 Tilera Corp.
+
+   Tilera TILEPro and TILE-Gx Foreign Function Interface
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   ``Software''), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+   NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+   HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+   WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+   OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+   DEALINGS IN THE SOFTWARE.
+   ----------------------------------------------------------------------- */
+
+#define LIBFFI_ASM
+#include <fficonfig.h>
+#include <ffi.h>
+
+/* Number of bytes in a register. */
+#define REG_SIZE FFI_SIZEOF_ARG
+
+/* Number of bytes in stack linkage area for backtracing.
+
+   A note about the ABI: on entry to a procedure, sp points to a stack
+   slot where it must spill the return address if it's not a leaf.
+   REG_SIZE bytes beyond that is a slot owned by the caller which
+   contains the sp value that the caller had when it was originally
+   entered (i.e. the caller's frame pointer). */
+#define LINKAGE_SIZE (2 * REG_SIZE)
+
+/* The first 10 registers are used to pass arguments and return values. */
+#define NUM_ARG_REGS 10
+
+#ifdef __tilegx__
+#define SW st
+#define LW ld
+#define BGZT bgtzt
+#else
+#define SW sw
+#define LW lw
+#define BGZT bgzt
+#endif
+
+
+/* void ffi_call_tile (int_reg_t reg_args[NUM_ARG_REGS],
+                       const int_reg_t *stack_args,
+                       unsigned long stack_args_bytes,
+                       void (*fnaddr)(void));
+
+        On entry, REG_ARGS contain the outgoing register values,
+        and STACK_ARGS containts STACK_ARG_BYTES of additional values
+        to be passed on the stack. If STACK_ARG_BYTES is zero, then
+        STACK_ARGS is ignored.
+
+        When the invoked function returns, the values of r0-r9 are
+        blindly stored back into REG_ARGS for the caller to examine. */
+
+        .section .text.ffi_call_tile, "ax", @progbits
+        .align  8
+        .globl  ffi_call_tile
+        FFI_HIDDEN(ffi_call_tile)
+ffi_call_tile:
+
+/* Incoming arguments. */
+#define REG_ARGS                r0
+#define INCOMING_STACK_ARGS     r1
+#define STACK_ARG_BYTES         r2
+#define ORIG_FNADDR             r3
+
+/* Temporary values. */
+#define FRAME_SIZE              r10
+#define TMP                     r11
+#define TMP2                    r12
+#define OUTGOING_STACK_ARGS     r13
+#define REG_ADDR_PTR            r14
+#define RETURN_REG_ADDR         r15
+#define FNADDR                  r16
+
+        .cfi_startproc
+        {
+         /* Save return address. */
+         SW     sp, lr
+         .cfi_offset lr, 0
+         /* Prepare to spill incoming r52. */
+         addi   TMP, sp, -REG_SIZE
+         /* Increase frame size to have room to spill r52 and REG_ARGS.
+            The +7 is to round up mod 8. */
+         addi   FRAME_SIZE, STACK_ARG_BYTES, \
+                REG_SIZE + REG_SIZE + LINKAGE_SIZE + 7
+        }
+        {
+         /* Round stack frame size to a multiple of 8 to satisfy ABI. */
+         andi   FRAME_SIZE, FRAME_SIZE, -8
+         /* Compute where to spill REG_ARGS value. */
+         addi   TMP2, sp, -(REG_SIZE * 2)
+        }
+        {
+         /* Spill incoming r52. */
+         SW     TMP, r52
+         .cfi_offset r52, -REG_SIZE
+         /* Set up our frame pointer. */
+         move   r52, sp
+         .cfi_def_cfa_register r52
+         /* Push stack frame. */
+         sub    sp, sp, FRAME_SIZE
+        }
+        {
+         /* Prepare to set up stack linkage. */
+         addi   TMP, sp, REG_SIZE
+         /* Prepare to memcpy stack args. */
+         addi   OUTGOING_STACK_ARGS, sp, LINKAGE_SIZE
+         /* Save REG_ARGS which we will need after we call the subroutine. */
+         SW     TMP2, REG_ARGS
+        }
+        {
+         /* Set up linkage info to hold incoming stack pointer. */
+         SW     TMP, r52
+        }
+        {
+         /* Skip stack args memcpy if we don't have any stack args (common). */
+         blezt  STACK_ARG_BYTES, .Ldone_stack_args_memcpy
+        }
+
+.Lmemcpy_stack_args:
+        {
+         /* Load incoming argument from stack_args. */
+         LW     TMP, INCOMING_STACK_ARGS
+         addi   INCOMING_STACK_ARGS, INCOMING_STACK_ARGS, REG_SIZE
+        }
+        {
+         /* Store stack argument into outgoing stack argument area. */
+         SW     OUTGOING_STACK_ARGS, TMP
+         addi   OUTGOING_STACK_ARGS, OUTGOING_STACK_ARGS, REG_SIZE
+         addi   STACK_ARG_BYTES, STACK_ARG_BYTES, -REG_SIZE
+        }
+        {
+         BGZT   STACK_ARG_BYTES, .Lmemcpy_stack_args
+        }
+.Ldone_stack_args_memcpy:
+
+        {
+         /* Copy aside ORIG_FNADDR so we can overwrite its register. */
+         move   FNADDR, ORIG_FNADDR
+         /* Prepare to load argument registers. */
+         addi   REG_ADDR_PTR, r0, REG_SIZE
+         /* Load outgoing r0. */
+         LW     r0, r0
+        }
+
+        /* Load up argument registers from the REG_ARGS array. */
+#define LOAD_REG(REG, PTR) \
+        { \
+         LW     REG, PTR ; \
+         addi   PTR, PTR, REG_SIZE \
+        }
+
+        LOAD_REG(r1, REG_ADDR_PTR)
+        LOAD_REG(r2, REG_ADDR_PTR)
+        LOAD_REG(r3, REG_ADDR_PTR)
+        LOAD_REG(r4, REG_ADDR_PTR)
+        LOAD_REG(r5, REG_ADDR_PTR)
+        LOAD_REG(r6, REG_ADDR_PTR)
+        LOAD_REG(r7, REG_ADDR_PTR)
+        LOAD_REG(r8, REG_ADDR_PTR)
+        LOAD_REG(r9, REG_ADDR_PTR)
+
+        {
+         /* Call the subroutine. */
+         jalr   FNADDR
+        }
+
+        {
+         /* Restore original lr. */
+         LW     lr, r52
+         /* Prepare to recover ARGS, which we spilled earlier. */
+         addi   TMP, r52, -(2 * REG_SIZE)
+        }
+        {
+         /* Restore ARGS, so we can fill it in with the return regs r0-r9. */
+         LW     RETURN_REG_ADDR, TMP
+         /* Prepare to restore original r52. */
+         addi   TMP, r52, -REG_SIZE
+        }
+
+        {
+         /* Pop stack frame. */
+         move   sp, r52
+         /* Restore original r52. */
+         LW     r52, TMP
+        }
+
+#define STORE_REG(REG, PTR) \
+        { \
+         SW     PTR, REG ; \
+         addi   PTR, PTR, REG_SIZE \
+        }
+
+        /* Return all register values by reference. */
+        STORE_REG(r0, RETURN_REG_ADDR)
+        STORE_REG(r1, RETURN_REG_ADDR)
+        STORE_REG(r2, RETURN_REG_ADDR)
+        STORE_REG(r3, RETURN_REG_ADDR)
+        STORE_REG(r4, RETURN_REG_ADDR)
+        STORE_REG(r5, RETURN_REG_ADDR)
+        STORE_REG(r6, RETURN_REG_ADDR)
+        STORE_REG(r7, RETURN_REG_ADDR)
+        STORE_REG(r8, RETURN_REG_ADDR)
+        STORE_REG(r9, RETURN_REG_ADDR)
+
+        {
+         jrp    lr
+        }
+
+        .cfi_endproc
+        .size ffi_call_tile, .-ffi_call_tile
+
+/* ffi_closure_tile(...)
+
+   On entry, lr points to the closure plus 8 bytes, and r10
+   contains the actual return address.
+
+   This function simply dumps all register parameters into a stack array
+   and passes the closure, the registers array, and the stack arguments
+   to C code that does all of the actual closure processing. */
+
+        .section .text.ffi_closure_tile, "ax", @progbits
+        .align  8
+        .globl  ffi_closure_tile
+        FFI_HIDDEN(ffi_closure_tile)
+
+        .cfi_startproc
+/* Room to spill all NUM_ARG_REGS incoming registers, plus frame linkage. */
+#define CLOSURE_FRAME_SIZE (((NUM_ARG_REGS * REG_SIZE * 2 + LINKAGE_SIZE) + 7) & -8)
+ffi_closure_tile:
+        {
+#ifdef __tilegx__
+         st     sp, lr
+         .cfi_offset lr, 0
+#else
+         /* Save return address (in r10 due to closure stub wrapper). */
+         SW     sp, r10
+         .cfi_return_column r10
+         .cfi_offset r10, 0
+#endif
+         /* Compute address for stack frame linkage. */
+         addli   r10, sp, -(CLOSURE_FRAME_SIZE - REG_SIZE)
+        }
+        {
+         /* Save incoming stack pointer in linkage area. */
+         SW     r10, sp
+         .cfi_offset sp, -(CLOSURE_FRAME_SIZE - REG_SIZE)
+         /* Push a new stack frame. */
+         addli   sp, sp, -CLOSURE_FRAME_SIZE
+         .cfi_adjust_cfa_offset CLOSURE_FRAME_SIZE
+        }
+
+        {
+         /* Create pointer to where to start spilling registers. */
+         addi   r10, sp, LINKAGE_SIZE
+        }
+
+        /* Spill all the incoming registers. */
+        STORE_REG(r0, r10)
+        STORE_REG(r1, r10)
+        STORE_REG(r2, r10)
+        STORE_REG(r3, r10)
+        STORE_REG(r4, r10)
+        STORE_REG(r5, r10)
+        STORE_REG(r6, r10)
+        STORE_REG(r7, r10)
+        STORE_REG(r8, r10)
+        {
+         /* Save r9. */
+         SW     r10, r9
+#ifdef __tilegx__
+         /* Pointer to closure is passed in r11. */
+         move  r0, r11
+#else
+         /* Compute pointer to the closure object. Because the closure
+            starts with a "jal ffi_closure_tile", we can just take the
+            value of lr (a phony return address pointing into the closure)
+            and subtract 8. */
+         addi   r0, lr, -8
+#endif
+         /* Compute a pointer to the register arguments we just spilled. */
+         addi   r1, sp, LINKAGE_SIZE
+        }
+        {
+         /* Compute a pointer to the extra stack arguments (if any). */
+         addli   r2, sp, CLOSURE_FRAME_SIZE + LINKAGE_SIZE
+         /* Call C code to deal with all of the grotty details. */
+         jal    ffi_closure_tile_inner
+        }
+        {
+         addli   r10, sp, CLOSURE_FRAME_SIZE
+        }
+        {
+         /* Restore the return address. */
+         LW     lr, r10
+         /* Compute pointer to registers array. */
+         addli   r10, sp, LINKAGE_SIZE + (NUM_ARG_REGS * REG_SIZE)
+        }
+        /* Return all the register values, which C code may have set. */
+        LOAD_REG(r0, r10)
+        LOAD_REG(r1, r10)
+        LOAD_REG(r2, r10)
+        LOAD_REG(r3, r10)
+        LOAD_REG(r4, r10)
+        LOAD_REG(r5, r10)
+        LOAD_REG(r6, r10)
+        LOAD_REG(r7, r10)
+        LOAD_REG(r8, r10)
+        LOAD_REG(r9, r10)
+        {
+         /* Pop the frame. */
+         addli   sp, sp, CLOSURE_FRAME_SIZE
+         jrp    lr
+        }
+
+        .cfi_endproc
+        .size   ffi_closure_tile, . - ffi_closure_tile
+
+
+/* What follows are code template instructions that get copied to the
+   closure trampoline by ffi_prep_closure_loc.  The zeroed operands
+   get replaced by their proper values at runtime. */
+
+        .section .text.ffi_template_tramp_tile, "ax", @progbits
+        .align  8
+        .globl  ffi_template_tramp_tile
+        FFI_HIDDEN(ffi_template_tramp_tile)
+ffi_template_tramp_tile:
+#ifdef __tilegx__
+        {
+          moveli r11, 0 /* backpatched to address of containing closure. */
+          moveli r10, 0 /* backpatched to ffi_closure_tile. */
+        }
+        /* Note: the following bundle gets generated multiple times
+           depending on the pointer value (esp. useful for -m32 mode). */
+        { shl16insli r11, r11, 0 ; shl16insli r10, r10, 0 }
+        { info 2+8 /* for backtracer: -> pc in lr, frame size 0 */ ; jr r10 }
+#else
+        /* 'jal .' yields a PC-relative offset of zero so we can OR in the
+           right offset at runtime. */
+        { move r10, lr ; jal . /* ffi_closure_tile */ }
+#endif
+
+        .size   ffi_template_tramp_tile, . - ffi_template_tramp_tile
diff --git a/Modules/_ctypes/libffi/src/x86/ffi.c b/Modules/_ctypes/libffi/src/x86/ffi.c
index 8049653..0600414 100644
--- a/Modules/_ctypes/libffi/src/x86/ffi.c
+++ b/Modules/_ctypes/libffi/src/x86/ffi.c
@@ -3,7 +3,7 @@
            Copyright (c) 2002  Ranjit Mathew
            Copyright (c) 2002  Bo Thorsen
            Copyright (c) 2002  Roger Sayle
-           Copyright (C) 2008  Free Software Foundation, Inc.
+           Copyright (C) 2008, 2010  Free Software Foundation, Inc.
 
    x86 Foreign Function Interface
 
@@ -48,10 +48,18 @@
   register void **p_argv;
   register char *argp;
   register ffi_type **p_arg;
+#ifdef X86_WIN32
+  size_t p_stack_args[2];
+  void *p_stack_data[2];
+  char *argp2 = stack;
+  int stack_args_count = 0;
+  int cabi = ecif->cif->abi;
+#endif
 
   argp = stack;
 
-  if (ecif->cif->flags == FFI_TYPE_STRUCT
+  if ((ecif->cif->flags == FFI_TYPE_STRUCT
+       || ecif->cif->flags == FFI_TYPE_MS_STRUCT)
 #ifdef X86_WIN64
       && (ecif->cif->rtype->size != 1 && ecif->cif->rtype->size != 2
           && ecif->cif->rtype->size != 4 && ecif->cif->rtype->size != 8)
@@ -59,6 +67,16 @@
       )
     {
       *(void **) argp = ecif->rvalue;
+#ifdef X86_WIN32
+      /* For fastcall/thiscall this is first register-passed
+         argument.  */
+      if (cabi == FFI_THISCALL || cabi == FFI_FASTCALL)
+	{
+	  p_stack_args[stack_args_count] = sizeof (void*);
+	  p_stack_data[stack_args_count] = argp;
+	  ++stack_args_count;
+	}
+#endif
       argp += sizeof(void*);
     }
 
@@ -134,6 +152,24 @@
         {
           memcpy(argp, *p_argv, z);
         }
+
+#ifdef X86_WIN32
+    /* For thiscall/fastcall convention register-passed arguments
+       are the first two none-floating-point arguments with a size
+       smaller or equal to sizeof (void*).  */
+    if ((cabi == FFI_THISCALL && stack_args_count < 1)
+        || (cabi == FFI_FASTCALL && stack_args_count < 2))
+      {
+	if (z <= 4
+	    && ((*p_arg)->type != FFI_TYPE_FLOAT
+	        && (*p_arg)->type != FFI_TYPE_STRUCT))
+	  {
+	    p_stack_args[stack_args_count] = z;
+	    p_stack_data[stack_args_count] = argp;
+	    ++stack_args_count;
+	  }
+      }
+#endif
       p_argv++;
 #ifdef X86_WIN64
       argp += (z + sizeof(void*) - 1) & ~(sizeof(void*) - 1);
@@ -141,7 +177,45 @@
       argp += z;
 #endif
     }
-  
+
+#ifdef X86_WIN32
+  /* We need to move the register-passed arguments for thiscall/fastcall
+     on top of stack, so that those can be moved to registers ecx/edx by
+     call-handler.  */
+  if (stack_args_count > 0)
+    {
+      size_t zz = (p_stack_args[0] + 3) & ~3;
+      char *h;
+
+      /* Move first argument to top-stack position.  */
+      if (p_stack_data[0] != argp2)
+	{
+	  h = alloca (zz + 1);
+	  memcpy (h, p_stack_data[0], zz);
+	  memmove (argp2 + zz, argp2,
+	           (size_t) ((char *) p_stack_data[0] - (char*)argp2));
+	  memcpy (argp2, h, zz);
+	}
+
+      argp2 += zz;
+      --stack_args_count;
+      if (zz > 4)
+	stack_args_count = 0;
+
+      /* If we have a second argument, then move it on top
+         after the first one.  */
+      if (stack_args_count > 0 && p_stack_data[1] != argp2)
+	{
+	  zz = p_stack_args[1];
+	  zz = (zz + 3) & ~3;
+	  h = alloca (zz + 1);
+	  h = alloca (zz + 1);
+	  memcpy (h, p_stack_data[1], zz);
+	  memmove (argp2 + zz, argp2, (size_t) ((char*) p_stack_data[1] - (char*)argp2));
+	  memcpy (argp2, h, zz);
+	}
+    }
+#endif
   return;
 }
 
@@ -155,12 +229,10 @@
   switch (cif->rtype->type)
     {
     case FFI_TYPE_VOID:
-#if defined(X86) || defined (X86_WIN32) || defined(X86_FREEBSD) || defined(X86_DARWIN) || defined(X86_WIN64)
     case FFI_TYPE_UINT8:
     case FFI_TYPE_UINT16:
     case FFI_TYPE_SINT8:
     case FFI_TYPE_SINT16:
-#endif
 #ifdef X86_WIN64
     case FFI_TYPE_UINT32:
     case FFI_TYPE_SINT32:
@@ -208,8 +280,13 @@
       else
 #endif
         {
-          cif->flags = FFI_TYPE_STRUCT;
-          // allocate space for return value pointer
+#ifdef X86_WIN32
+          if (cif->abi == FFI_MS_CDECL)
+            cif->flags = FFI_TYPE_MS_STRUCT;
+          else
+#endif
+            cif->flags = FFI_TYPE_STRUCT;
+          /* allocate space for return value pointer */
           cif->bytes += ALIGN(sizeof(void*), FFI_SIZEOF_ARG);
         }
       break;
@@ -234,13 +311,11 @@
     }
 
 #ifdef X86_WIN64
-  // ensure space for storing four registers
+  /* ensure space for storing four registers */
   cif->bytes += 4 * sizeof(ffi_arg);
 #endif
 
-#ifdef X86_DARWIN
   cif->bytes = (cif->bytes + 15) & ~0xF;
-#endif
 
   return FFI_OK;
 }
@@ -252,7 +327,7 @@
 #elif defined(X86_WIN32)
 extern void
 ffi_call_win32(void (*)(char *, extended_cif *), extended_cif *,
-               unsigned, unsigned, unsigned *, void (*fn)(void));
+               unsigned, unsigned, unsigned, unsigned *, void (*fn)(void));
 #else
 extern void ffi_call_SYSV(void (*)(char *, extended_cif *), extended_cif *,
                           unsigned, unsigned, unsigned *, void (*fn)(void));
@@ -278,7 +353,8 @@
     }
 #else
   if (rvalue == NULL
-      && cif->flags == FFI_TYPE_STRUCT)
+      && (cif->flags == FFI_TYPE_STRUCT
+          || cif->flags == FFI_TYPE_MS_STRUCT))
     {
       ecif.rvalue = alloca(cif->rtype->size);
     }
@@ -291,33 +367,44 @@
     {
 #ifdef X86_WIN64
     case FFI_WIN64:
-      {
-        // Make copies of all struct arguments
-        // NOTE: not sure if responsibility should be here or in caller
-        unsigned int i;
-        for (i=0; i < cif->nargs;i++) {
-          size_t size = cif->arg_types[i]->size;
-          if ((cif->arg_types[i]->type == FFI_TYPE_STRUCT
-               && (size != 1 && size != 2 && size != 4 && size != 8))
-#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
-              || cif->arg_types[i]->type == FFI_TYPE_LONGDOUBLE
-#endif
-              )
-            {
-              void *local = alloca(size);
-              memcpy(local, avalue[i], size);
-              avalue[i] = local;
-            }
-        }
-        ffi_call_win64(ffi_prep_args, &ecif, cif->bytes,
-                       cif->flags, ecif.rvalue, fn);
-      }
+      ffi_call_win64(ffi_prep_args, &ecif, cif->bytes,
+                     cif->flags, ecif.rvalue, fn);
       break;
 #elif defined(X86_WIN32)
     case FFI_SYSV:
     case FFI_STDCALL:
-      ffi_call_win32(ffi_prep_args, &ecif, cif->bytes, cif->flags,
-                     ecif.rvalue, fn);
+    case FFI_MS_CDECL:
+      ffi_call_win32(ffi_prep_args, &ecif, cif->abi, cif->bytes, cif->flags,
+		     ecif.rvalue, fn);
+      break;
+    case FFI_THISCALL:
+    case FFI_FASTCALL:
+      {
+	unsigned int abi = cif->abi;
+	unsigned int i, passed_regs = 0;
+
+	if (cif->flags == FFI_TYPE_STRUCT)
+	  ++passed_regs;
+
+	for (i=0; i < cif->nargs && passed_regs < 2;i++)
+	  {
+	    size_t sz;
+
+	    if (cif->arg_types[i]->type == FFI_TYPE_FLOAT
+	        || cif->arg_types[i]->type == FFI_TYPE_STRUCT)
+	      continue;
+	    sz = (cif->arg_types[i]->size + 3) & ~3;
+	    if (sz == 0 || sz > 4)
+	      continue;
+	    ++passed_regs;
+	  }
+	if (passed_regs < 2 && abi == FFI_FASTCALL)
+	  abi = FFI_THISCALL;
+	if (passed_regs < 1 && abi == FFI_THISCALL)
+	  abi = FFI_STDCALL;
+        ffi_call_win32(ffi_prep_args, &ecif, abi, cif->bytes, cif->flags,
+                       ecif.rvalue, fn);
+      }
       break;
 #else
     case FFI_SYSV:
@@ -335,7 +422,7 @@
 /** private members **/
 
 /* The following __attribute__((regparm(1))) decorations will have no effect
-   on MSVC - standard cdecl convention applies. */
+   on MSVC or SUNPRO_C -- standard conventions apply. */
 static void ffi_prep_incoming_args_SYSV (char *stack, void **ret,
                                          void** args, ffi_cif* cif);
 void FFI_HIDDEN ffi_closure_SYSV (ffi_closure *)
@@ -345,8 +432,12 @@
 void FFI_HIDDEN ffi_closure_raw_SYSV (ffi_raw_closure *)
      __attribute__ ((regparm(1)));
 #ifdef X86_WIN32
+void FFI_HIDDEN ffi_closure_raw_THISCALL (ffi_raw_closure *)
+     __attribute__ ((regparm(1)));
 void FFI_HIDDEN ffi_closure_STDCALL (ffi_closure *)
      __attribute__ ((regparm(1)));
+void FFI_HIDDEN ffi_closure_THISCALL (ffi_closure *)
+     __attribute__ ((regparm(1)));
 #endif
 #ifdef X86_WIN64
 void FFI_HIDDEN ffi_closure_win64 (ffi_closure *);
@@ -428,7 +519,8 @@
     argp += sizeof(void *);
   }
 #else
-  if ( cif->flags == FFI_TYPE_STRUCT ) {
+  if ( cif->flags == FFI_TYPE_STRUCT
+       || cif->flags == FFI_TYPE_MS_STRUCT ) {
     *rvalue = *(void **) argp;
     argp += sizeof(void *);
   }
@@ -506,6 +598,33 @@
    *(unsigned int*)  &__tramp[6] = __dis; /* jmp __fun  */ \
  }
 
+#define FFI_INIT_TRAMPOLINE_THISCALL(TRAMP,FUN,CTX,SIZE) \
+{ unsigned char *__tramp = (unsigned char*)(TRAMP); \
+   unsigned int  __fun = (unsigned int)(FUN); \
+   unsigned int  __ctx = (unsigned int)(CTX); \
+   unsigned int  __dis = __fun - (__ctx + 49);  \
+   unsigned short __size = (unsigned short)(SIZE); \
+   *(unsigned int *) &__tramp[0] = 0x8324048b;	/* mov (%esp), %eax */ \
+   *(unsigned int *) &__tramp[4] = 0x4c890cec;	/* sub $12, %esp */ \
+   *(unsigned int *) &__tramp[8] = 0x04890424;	/* mov %ecx, 4(%esp) */ \
+   *(unsigned char*) &__tramp[12] = 0x24;	/* mov %eax, (%esp) */ \
+   *(unsigned char*) &__tramp[13] = 0xb8; \
+   *(unsigned int *) &__tramp[14] = __size;	/* mov __size, %eax */ \
+   *(unsigned int *) &__tramp[18] = 0x08244c8d;	/* lea 8(%esp), %ecx */ \
+   *(unsigned int *) &__tramp[22] = 0x4802e8c1; /* shr $2, %eax ; dec %eax */ \
+   *(unsigned short*) &__tramp[26] = 0x0b74;	/* jz 1f */ \
+   *(unsigned int *) &__tramp[28] = 0x8908518b;	/* 2b: mov 8(%ecx), %edx */ \
+   *(unsigned int *) &__tramp[32] = 0x04c18311; /* mov %edx, (%ecx) ; add $4, %ecx */ \
+   *(unsigned char*) &__tramp[36] = 0x48;	/* dec %eax */ \
+   *(unsigned short*) &__tramp[37] = 0xf575;	/* jnz 2b ; 1f: */ \
+   *(unsigned char*) &__tramp[39] = 0xb8; \
+   *(unsigned int*)  &__tramp[40] = __ctx; /* movl __ctx, %eax */ \
+   *(unsigned char *)  &__tramp[44] = 0xe8; \
+   *(unsigned int*)  &__tramp[45] = __dis; /* call __fun  */ \
+   *(unsigned char*)  &__tramp[49] = 0xc2; /* ret  */ \
+   *(unsigned short*)  &__tramp[50] = (__size + 8); /* ret (__size + 8)  */ \
+ }
+
 #define FFI_INIT_TRAMPOLINE_STDCALL(TRAMP,FUN,CTX,SIZE)  \
 { unsigned char *__tramp = (unsigned char*)(TRAMP); \
    unsigned int  __fun = (unsigned int)(FUN); \
@@ -548,12 +667,25 @@
                            (void*)codeloc);
     }
 #ifdef X86_WIN32
+  else if (cif->abi == FFI_THISCALL)
+    {
+      FFI_INIT_TRAMPOLINE_THISCALL (&closure->tramp[0],
+				    &ffi_closure_THISCALL,
+				    (void*)codeloc,
+				    cif->bytes);
+    }
   else if (cif->abi == FFI_STDCALL)
     {
       FFI_INIT_TRAMPOLINE_STDCALL (&closure->tramp[0],
                                    &ffi_closure_STDCALL,
                                    (void*)codeloc, cif->bytes);
     }
+  else if (cif->abi == FFI_MS_CDECL)
+    {
+      FFI_INIT_TRAMPOLINE (&closure->tramp[0],
+                           &ffi_closure_SYSV,
+                           (void*)codeloc);
+    }
 #endif /* X86_WIN32 */
 #endif /* !X86_WIN64 */
   else
@@ -582,6 +714,9 @@
   int i;
 
   if (cif->abi != FFI_SYSV) {
+#ifdef X86_WIN32
+    if (cif->abi != FFI_THISCALL)
+#endif
     return FFI_BAD_ABI;
   }
 
@@ -596,10 +731,20 @@
       FFI_ASSERT (cif->arg_types[i]->type != FFI_TYPE_LONGDOUBLE);
     }
   
-
+#ifdef X86_WIN32
+  if (cif->abi == FFI_SYSV)
+    {
+#endif
   FFI_INIT_TRAMPOLINE (&closure->tramp[0], &ffi_closure_raw_SYSV,
                        codeloc);
-    
+#ifdef X86_WIN32
+    }
+  else if (cif->abi == FFI_THISCALL)
+    {
+      FFI_INIT_TRAMPOLINE_THISCALL (&closure->tramp[0], &ffi_closure_raw_THISCALL,
+				    codeloc, cif->bytes);
+    }
+#endif
   closure->cif  = cif;
   closure->user_data = user_data;
   closure->fun  = fun;
@@ -630,8 +775,9 @@
   /* If the return value is a struct and we don't have a return */
   /* value address then we need to make one                     */
 
-  if ((rvalue == NULL) && 
-      (cif->rtype->type == FFI_TYPE_STRUCT))
+  if (rvalue == NULL
+      && (cif->flags == FFI_TYPE_STRUCT
+          || cif->flags == FFI_TYPE_MS_STRUCT))
     {
       ecif.rvalue = alloca(cif->rtype->size);
     }
@@ -644,8 +790,38 @@
 #ifdef X86_WIN32
     case FFI_SYSV:
     case FFI_STDCALL:
-      ffi_call_win32(ffi_prep_args_raw, &ecif, cif->bytes, cif->flags,
-                     ecif.rvalue, fn);
+    case FFI_MS_CDECL:
+      ffi_call_win32(ffi_prep_args_raw, &ecif, cif->abi, cif->bytes, cif->flags,
+		     ecif.rvalue, fn);
+      break;
+    case FFI_THISCALL:
+    case FFI_FASTCALL:
+      {
+	unsigned int abi = cif->abi;
+	unsigned int i, passed_regs = 0;
+
+	if (cif->flags == FFI_TYPE_STRUCT)
+	  ++passed_regs;
+
+	for (i=0; i < cif->nargs && passed_regs < 2;i++)
+	  {
+	    size_t sz;
+
+	    if (cif->arg_types[i]->type == FFI_TYPE_FLOAT
+	        || cif->arg_types[i]->type == FFI_TYPE_STRUCT)
+	      continue;
+	    sz = (cif->arg_types[i]->size + 3) & ~3;
+	    if (sz == 0 || sz > 4)
+	      continue;
+	    ++passed_regs;
+	  }
+	if (passed_regs < 2 && abi == FFI_FASTCALL)
+	  cif->abi = abi = FFI_THISCALL;
+	if (passed_regs < 1 && abi == FFI_THISCALL)
+	  cif->abi = abi = FFI_STDCALL;
+        ffi_call_win32(ffi_prep_args_raw, &ecif, abi, cif->bytes, cif->flags,
+                       ecif.rvalue, fn);
+      }
       break;
 #else
     case FFI_SYSV:
diff --git a/Modules/_ctypes/libffi/src/x86/ffi64.c b/Modules/_ctypes/libffi/src/x86/ffi64.c
index 07a2627..2014af2 100644
--- a/Modules/_ctypes/libffi/src/x86/ffi64.c
+++ b/Modules/_ctypes/libffi/src/x86/ffi64.c
@@ -1,7 +1,9 @@
 /* -----------------------------------------------------------------------
-   ffi64.c - Copyright (c) 2002, 2007  Bo Thorsen <bo@suse.de>
-             Copyright (c) 2008  Red Hat, Inc.
-   
+   ffi64.c - Copyright (c) 2013  The Written Word, Inc.
+             Copyright (c) 2011  Anthony Green
+             Copyright (c) 2008, 2010  Red Hat, Inc.
+             Copyright (c) 2002, 2007  Bo Thorsen <bo@suse.de>
+             
    x86-64 Foreign Function Interface 
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -36,11 +38,29 @@
 #define MAX_GPR_REGS 6
 #define MAX_SSE_REGS 8
 
+#if defined(__INTEL_COMPILER)
+#define UINT128 __m128
+#else
+#if defined(__SUNPRO_C)
+#include <sunmedia_types.h>
+#define UINT128 __m128i
+#else
+#define UINT128 __int128_t
+#endif
+#endif
+
+union big_int_union
+{
+  UINT32 i32;
+  UINT64 i64;
+  UINT128 i128;
+};
+
 struct register_args
 {
   /* Registers for argument passing.  */
   UINT64 gpr[MAX_GPR_REGS];
-  __int128_t sse[MAX_SSE_REGS];
+  union big_int_union sse[MAX_SSE_REGS]; 
 };
 
 extern void ffi_call_unix64 (void *args, unsigned long bytes, unsigned flags,
@@ -378,7 +398,7 @@
 	  if (align < 8)
 	    align = 8;
 
-	  bytes = ALIGN(bytes, align);
+	  bytes = ALIGN (bytes, align);
 	  bytes += cif->arg_types[i]->size;
 	}
       else
@@ -390,7 +410,7 @@
   if (ssecount)
     flags |= 1 << 11;
   cif->flags = flags;
-  cif->bytes = bytes;
+  cif->bytes = ALIGN (bytes, 8);
 
   return FFI_OK;
 }
@@ -426,7 +446,7 @@
   /* If the return value is passed in memory, add the pointer as the
      first integer argument.  */
   if (ret_in_memory)
-    reg_args->gpr[gprcount++] = (long) rvalue;
+    reg_args->gpr[gprcount++] = (unsigned long) rvalue;
 
   avn = cif->nargs;
   arg_types = cif->arg_types;
@@ -464,16 +484,33 @@
 		{
 		case X86_64_INTEGER_CLASS:
 		case X86_64_INTEGERSI_CLASS:
-		  reg_args->gpr[gprcount] = 0;
-		  memcpy (&reg_args->gpr[gprcount], a, size < 8 ? size : 8);
+		  /* Sign-extend integer arguments passed in general
+		     purpose registers, to cope with the fact that
+		     LLVM incorrectly assumes that this will be done
+		     (the x86-64 PS ABI does not specify this). */
+		  switch (arg_types[i]->type)
+		    {
+		    case FFI_TYPE_SINT8:
+		      *(SINT64 *)&reg_args->gpr[gprcount] = (SINT64) *((SINT8 *) a);
+		      break;
+		    case FFI_TYPE_SINT16:
+		      *(SINT64 *)&reg_args->gpr[gprcount] = (SINT64) *((SINT16 *) a);
+		      break;
+		    case FFI_TYPE_SINT32:
+		      *(SINT64 *)&reg_args->gpr[gprcount] = (SINT64) *((SINT32 *) a);
+		      break;
+		    default:
+		      reg_args->gpr[gprcount] = 0;
+		      memcpy (&reg_args->gpr[gprcount], a, size < 8 ? size : 8);
+		    }
 		  gprcount++;
 		  break;
 		case X86_64_SSE_CLASS:
 		case X86_64_SSEDF_CLASS:
-		  reg_args->sse[ssecount++] = *(UINT64 *) a;
+		  reg_args->sse[ssecount++].i64 = *(UINT64 *) a;
 		  break;
 		case X86_64_SSESF_CLASS:
-		  reg_args->sse[ssecount++] = *(UINT32 *) a;
+		  reg_args->sse[ssecount++].i32 = *(UINT32 *) a;
 		  break;
 		default:
 		  abort();
@@ -498,12 +535,21 @@
 {
   volatile unsigned short *tramp;
 
+  /* Sanity check on the cif ABI.  */
+  {
+    int abi = cif->abi;
+    if (UNLIKELY (! (abi > FFI_FIRST_ABI && abi < FFI_LAST_ABI)))
+      return FFI_BAD_ABI;
+  }
+
   tramp = (volatile unsigned short *) &closure->tramp[0];
 
   tramp[0] = 0xbb49;		/* mov <code>, %r11	*/
-  *(void * volatile *) &tramp[1] = ffi_closure_unix64;
+  *((unsigned long long * volatile) &tramp[1])
+    = (unsigned long) ffi_closure_unix64;
   tramp[5] = 0xba49;		/* mov <data>, %r10	*/
-  *(void * volatile *) &tramp[6] = codeloc;
+  *((unsigned long long * volatile) &tramp[6])
+    = (unsigned long) codeloc;
 
   /* Set the carry bit iff the function uses any sse registers.
      This is clc or stc, together with the first byte of the jmp.  */
@@ -542,7 +588,7 @@
 	{
 	  /* The return value goes in memory.  Arrange for the closure
 	     return value to go directly back to the original caller.  */
-	  rvalue = (void *) reg_args->gpr[gprcount++];
+	  rvalue = (void *) (unsigned long) reg_args->gpr[gprcount++];
 	  /* We don't have to do anything in asm for the return.  */
 	  ret = FFI_TYPE_VOID;
 	}
diff --git a/Modules/_ctypes/libffi/src/x86/ffitarget.h b/Modules/_ctypes/libffi/src/x86/ffitarget.h
index 89a8983..46f294c 100644
--- a/Modules/_ctypes/libffi/src/x86/ffitarget.h
+++ b/Modules/_ctypes/libffi/src/x86/ffitarget.h
@@ -1,6 +1,7 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003, 2010  Red Hat, Inc.
-   Copyright (C) 2008  Free Software Foundation, Inc.
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 1996-2003, 2010  Red Hat, Inc.
+                 Copyright (C) 2008  Free Software Foundation, Inc.
 
    Target configuration macros for x86 and x86-64.
 
@@ -29,8 +30,15 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 /* ---- System specific configurations ----------------------------------- */
 
+/* For code common to all platforms on x86 and x86_64. */
+#define X86_ANY
+
 #if defined (X86_64) && defined (__i386__)
 #undef X86_64
 #define X86
@@ -38,7 +46,7 @@
 
 #ifdef X86_WIN64
 #define FFI_SIZEOF_ARG 8
-#define USE_BUILTIN_FFS 0 // not yet implemented in mingw-64 
+#define USE_BUILTIN_FFS 0 /* not yet implemented in mingw-64 */
 #endif
 
 /* ---- Generic type definitions ----------------------------------------- */
@@ -53,9 +61,16 @@
 typedef long long              ffi_sarg;
 #endif
 #else
+#if defined __x86_64__ && defined __ILP32__
+#define FFI_SIZEOF_ARG 8
+#define FFI_SIZEOF_JAVA_RAW  4
+typedef unsigned long long     ffi_arg;
+typedef long long              ffi_sarg;
+#else
 typedef unsigned long          ffi_arg;
 typedef signed long            ffi_sarg;
 #endif
+#endif
 
 typedef enum ffi_abi {
   FFI_FIRST_ABI = 0,
@@ -64,28 +79,32 @@
 #ifdef X86_WIN32
   FFI_SYSV,
   FFI_STDCALL,
-  /* TODO: Add fastcall support for the sake of completeness */
-  FFI_DEFAULT_ABI = FFI_SYSV,
+  FFI_THISCALL,
+  FFI_FASTCALL,
+  FFI_MS_CDECL,
+  FFI_LAST_ABI,
+#ifdef _MSC_VER
+  FFI_DEFAULT_ABI = FFI_MS_CDECL
+#else
+  FFI_DEFAULT_ABI = FFI_SYSV
 #endif
 
-#ifdef X86_WIN64
+#elif defined(X86_WIN64)
   FFI_WIN64,
-  FFI_DEFAULT_ABI = FFI_WIN64,
-#else
+  FFI_LAST_ABI,
+  FFI_DEFAULT_ABI = FFI_WIN64
 
+#else
   /* ---- Intel x86 and AMD x86-64 - */
-#if !defined(X86_WIN32) && (defined(__i386__) || defined(__x86_64__) || defined(__i386) || defined(__amd64))
   FFI_SYSV,
   FFI_UNIX64,   /* Unix variants all use the same ABI for x86-64  */
+  FFI_LAST_ABI,
 #if defined(__i386__) || defined(__i386)
-  FFI_DEFAULT_ABI = FFI_SYSV,
+  FFI_DEFAULT_ABI = FFI_SYSV
 #else
-  FFI_DEFAULT_ABI = FFI_UNIX64,
+  FFI_DEFAULT_ABI = FFI_UNIX64
 #endif
 #endif
-#endif /* X86_WIN64 */
-
-  FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
 } ffi_abi;
 #endif
 
@@ -95,13 +114,14 @@
 #define FFI_TYPE_SMALL_STRUCT_1B (FFI_TYPE_LAST + 1)
 #define FFI_TYPE_SMALL_STRUCT_2B (FFI_TYPE_LAST + 2)
 #define FFI_TYPE_SMALL_STRUCT_4B (FFI_TYPE_LAST + 3)
+#define FFI_TYPE_MS_STRUCT       (FFI_TYPE_LAST + 4)
 
 #if defined (X86_64) || (defined (__x86_64__) && defined (X86_DARWIN))
 #define FFI_TRAMPOLINE_SIZE 24
 #define FFI_NATIVE_RAW_API 0
 #else
 #ifdef X86_WIN32
-#define FFI_TRAMPOLINE_SIZE 13
+#define FFI_TRAMPOLINE_SIZE 52
 #else
 #ifdef X86_WIN64
 #define FFI_TRAMPOLINE_SIZE 29
diff --git a/Modules/_ctypes/libffi/src/x86/sysv.S b/Modules/_ctypes/libffi/src/x86/sysv.S
index f4b6c1e..3bd5477 100644
--- a/Modules/_ctypes/libffi/src/x86/sysv.S
+++ b/Modules/_ctypes/libffi/src/x86/sysv.S
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------------
-   sysv.S - Copyright (c) 1996, 1998, 2001-2003, 2005, 2008  Red Hat, Inc.
+   sysv.S - Copyright (c) 2013  The Written Word, Inc.
+	  - Copyright (c) 1996,1998,2001-2003,2005,2008,2010  Red Hat, Inc.
    
    X86 Foreign Function Interface 
 
@@ -48,6 +49,9 @@
 	movl  16(%ebp),%ecx
 	subl  %ecx,%esp
 
+        /* Align the stack pointer to 16-bytes */
+        andl  $0xfffffff0, %esp
+
 	movl  %esp,%eax
 
 	/* Place all of the ffi_prep_args in position  */
@@ -178,9 +182,19 @@
 	leal	-24(%ebp), %edx
 	movl	%edx, -12(%ebp)	/* resp */
 	leal	8(%ebp), %edx
+#ifdef __SUNPRO_C
+	/* The SUNPRO compiler doesn't support GCC's regparm function
+  	   attribute, so we have to pass all three arguments to
+	   ffi_closure_SYSV_inner on the stack.  */
+	movl	%edx, 8(%esp)	/* args = __builtin_dwarf_cfa () */
+	leal	-12(%ebp), %edx
+	movl	%edx, 4(%esp)	/* &resp */
+	movl    %eax, (%esp)    /* closure */
+#else
 	movl	%edx, 4(%esp)	/* args = __builtin_dwarf_cfa () */
 	leal	-12(%ebp), %edx
 	movl	%edx, (%esp)	/* &resp */
+#endif
 #if defined HAVE_HIDDEN_VISIBILITY_ATTRIBUTE || !defined __PIC__
 	call	ffi_closure_SYSV_inner
 #else
@@ -325,23 +339,55 @@
 	.size	ffi_closure_raw_SYSV, .-ffi_closure_raw_SYSV
 #endif
 
+#if defined __GNUC__
+/* Only emit dwarf unwind info when building with GNU toolchain.  */
+
+#if defined __PIC__
+# if defined __sun__ && defined __svr4__
+/* 32-bit Solaris 2/x86 uses datarel encoding for PIC.  GNU ld before 2.22
+   doesn't correctly sort .eh_frame_hdr with mixed encodings, so match this.  */
+#  define FDE_ENCODING		0x30	/* datarel */
+#  define FDE_ENCODE(X)		X@GOTOFF
+# else
+#  define FDE_ENCODING		0x1b	/* pcrel sdata4 */
+#  if defined HAVE_AS_X86_PCREL
+#   define FDE_ENCODE(X)	X-.
+#  else
+#   define FDE_ENCODE(X)	X@rel
+#  endif
+# endif
+#else
+# define FDE_ENCODING		0	/* absolute */
+# define FDE_ENCODE(X)		X
+#endif
+
 	.section	.eh_frame,EH_FRAME_FLAGS,@progbits
 .Lframe1:
 	.long	.LECIE1-.LSCIE1	/* Length of Common Information Entry */
 .LSCIE1:
 	.long	0x0	/* CIE Identifier Tag */
 	.byte	0x1	/* CIE Version */
+#ifdef HAVE_AS_ASCII_PSEUDO_OP
 #ifdef __PIC__
 	.ascii "zR\0"	/* CIE Augmentation */
 #else
 	.ascii "\0"	/* CIE Augmentation */
 #endif
+#elif defined HAVE_AS_STRING_PSEUDO_OP
+#ifdef __PIC__
+	.string "zR"	/* CIE Augmentation */
+#else
+	.string ""	/* CIE Augmentation */
+#endif
+#else
+#error missing .ascii/.string
+#endif
 	.byte	0x1	/* .uleb128 0x1; CIE Code Alignment Factor */
 	.byte	0x7c	/* .sleb128 -4; CIE Data Alignment Factor */
 	.byte	0x8	/* CIE RA Column */
 #ifdef __PIC__
 	.byte	0x1	/* .uleb128 0x1; Augmentation size */
-	.byte	0x1b	/* FDE Encoding (pcrel sdata4) */
+	.byte	FDE_ENCODING
 #endif
 	.byte	0xc	/* DW_CFA_def_cfa */
 	.byte	0x4	/* .uleb128 0x4 */
@@ -354,14 +400,8 @@
 	.long	.LEFDE1-.LASFDE1	/* FDE Length */
 .LASFDE1:
 	.long	.LASFDE1-.Lframe1	/* FDE CIE offset */
-#if defined __PIC__ && defined HAVE_AS_X86_PCREL
-	.long	.LFB1-.	/* FDE initial location */
-#elif defined __PIC__
-	.long	.LFB1@rel
-#else
-	.long	.LFB1
-#endif
-	.long	.LFE1-.LFB1	/* FDE address range */
+	.long	FDE_ENCODE(.LFB1)	/* FDE initial location */
+	.long	.LFE1-.LFB1		/* FDE address range */
 #ifdef __PIC__
 	.byte	0x0	/* .uleb128 0x0; Augmentation size */
 #endif
@@ -381,14 +421,8 @@
 	.long	.LEFDE2-.LASFDE2	/* FDE Length */
 .LASFDE2:
 	.long	.LASFDE2-.Lframe1	/* FDE CIE offset */
-#if defined __PIC__ && defined HAVE_AS_X86_PCREL
-	.long	.LFB2-.	/* FDE initial location */
-#elif defined __PIC__
-	.long	.LFB2@rel
-#else
-	.long	.LFB2
-#endif
-	.long	.LFE2-.LFB2	/* FDE address range */
+	.long	FDE_ENCODE(.LFB2)	/* FDE initial location */
+	.long	.LFE2-.LFB2		/* FDE address range */
 #ifdef __PIC__
 	.byte	0x0	/* .uleb128 0x0; Augmentation size */
 #endif
@@ -417,14 +451,8 @@
 	.long	.LEFDE3-.LASFDE3	/* FDE Length */
 .LASFDE3:
 	.long	.LASFDE3-.Lframe1	/* FDE CIE offset */
-#if defined __PIC__ && defined HAVE_AS_X86_PCREL
-	.long	.LFB3-.	/* FDE initial location */
-#elif defined __PIC__
-	.long	.LFB3@rel
-#else
-	.long	.LFB3
-#endif
-	.long	.LFE3-.LFB3	/* FDE address range */
+	.long	FDE_ENCODE(.LFB3)	/* FDE initial location */
+	.long	.LFE3-.LFB3		/* FDE address range */
 #ifdef __PIC__
 	.byte	0x0	/* .uleb128 0x0; Augmentation size */
 #endif
@@ -446,6 +474,7 @@
 .LEFDE3:
 
 #endif
+#endif
 
 #endif /* ifndef __x86_64__ */
 
diff --git a/Modules/_ctypes/libffi/src/x86/unix64.S b/Modules/_ctypes/libffi/src/x86/unix64.S
index fe3f4fd..dcd6bc7 100644
--- a/Modules/_ctypes/libffi/src/x86/unix64.S
+++ b/Modules/_ctypes/libffi/src/x86/unix64.S
@@ -1,6 +1,7 @@
 /* -----------------------------------------------------------------------
-   unix64.S - Copyright (c) 2002  Bo Thorsen <bo@suse.de>
-	      Copyright (c) 2008  Red Hat, Inc
+   unix64.S - Copyright (c) 2013  The Written Word, Inc.
+	    - Copyright (c) 2008  Red Hat, Inc
+	    - Copyright (c) 2002  Bo Thorsen <bo@suse.de>
 
    x86-64 Foreign Function Interface 
 
@@ -324,7 +325,14 @@
 .LUW9:
 	.size	ffi_closure_unix64,.-ffi_closure_unix64
 
+#ifdef __GNUC__
+/* Only emit DWARF unwind info when building with the GNU toolchain.  */
+
+#ifdef HAVE_AS_X86_64_UNWIND_SECTION_TYPE
+	.section	.eh_frame,"a",@unwind
+#else
 	.section	.eh_frame,"a",@progbits
+#endif
 .Lframe1:
 	.long	.LECIE1-.LSCIE1		/* CIE Length */
 .LSCIE1:
@@ -415,6 +423,8 @@
 	.align 8
 .LEFDE3:
 
+#endif /* __GNUC__ */
+	
 #endif /* __x86_64__ */
 
 #if defined __ELF__ && defined __linux__
diff --git a/Modules/_ctypes/libffi/src/x86/win32.S b/Modules/_ctypes/libffi/src/x86/win32.S
index ac1ed6f..24b7bbd 100644
--- a/Modules/_ctypes/libffi/src/x86/win32.S
+++ b/Modules/_ctypes/libffi/src/x86/win32.S
@@ -45,6 +45,7 @@
 ffi_call_win32 PROC NEAR,
     ffi_prep_args : NEAR PTR DWORD,
     ecif          : NEAR PTR DWORD,
+    cif_abi       : DWORD,
     cif_bytes     : DWORD,
     cif_flags     : DWORD,
     rvalue        : NEAR PTR DWORD,
@@ -64,6 +65,19 @@
         ;; Return stack to previous state and call the function
         add  esp, 8
 
+	;; Handle thiscall and fastcall
+	cmp cif_abi, 3 ;; FFI_THISCALL
+	jz do_thiscall
+	cmp cif_abi, 4 ;; FFI_FASTCALL
+	jnz do_stdcall
+	mov ecx, DWORD PTR [esp]
+	mov edx, DWORD PTR [esp+4]
+	add esp, 8
+	jmp do_stdcall
+do_thiscall:
+	mov ecx, DWORD PTR [esp]
+	add esp, 4
+do_stdcall:
         call fn
 
         ;; cdecl:   we restore esp in the epilogue, so there's no need to
@@ -94,31 +108,37 @@
         dd offset ca_retfloat       ;; FFI_TYPE_FLOAT
         dd offset ca_retdouble      ;; FFI_TYPE_DOUBLE
         dd offset ca_retlongdouble  ;; FFI_TYPE_LONGDOUBLE
-        dd offset ca_retint8        ;; FFI_TYPE_UINT8
-        dd offset ca_retint8        ;; FFI_TYPE_SINT8
-        dd offset ca_retint16       ;; FFI_TYPE_UINT16
-        dd offset ca_retint16       ;; FFI_TYPE_SINT16
+        dd offset ca_retuint8       ;; FFI_TYPE_UINT8
+        dd offset ca_retsint8       ;; FFI_TYPE_SINT8
+        dd offset ca_retuint16      ;; FFI_TYPE_UINT16
+        dd offset ca_retsint16      ;; FFI_TYPE_SINT16
         dd offset ca_retint         ;; FFI_TYPE_UINT32
         dd offset ca_retint         ;; FFI_TYPE_SINT32
         dd offset ca_retint64       ;; FFI_TYPE_UINT64
         dd offset ca_retint64       ;; FFI_TYPE_SINT64
         dd offset ca_epilogue       ;; FFI_TYPE_STRUCT
         dd offset ca_retint         ;; FFI_TYPE_POINTER
-        dd offset ca_retint8        ;; FFI_TYPE_SMALL_STRUCT_1B
-        dd offset ca_retint16       ;; FFI_TYPE_SMALL_STRUCT_2B
+        dd offset ca_retstruct1b    ;; FFI_TYPE_SMALL_STRUCT_1B
+        dd offset ca_retstruct2b    ;; FFI_TYPE_SMALL_STRUCT_2B
         dd offset ca_retint         ;; FFI_TYPE_SMALL_STRUCT_4B
+        dd offset ca_epilogue       ;; FFI_TYPE_MS_STRUCT
 
-ca_retint8:
-        ;; Load %ecx with the pointer to storage for the return value
-        mov   ecx, rvalue
-        mov   [ecx + 0], al
-        jmp   ca_epilogue
+        /* Sign/zero extend as appropriate.  */
+ca_retuint8:
+        movzx eax, al
+        jmp   ca_retint
 
-ca_retint16:
-        ;; Load %ecx with the pointer to storage for the return value
-        mov   ecx, rvalue
-        mov   [ecx + 0], ax
-        jmp   ca_epilogue
+ca_retsint8:
+        movsx eax, al
+        jmp   ca_retint
+
+ca_retuint16:
+        movzx eax, ax
+        jmp   ca_retint
+
+ca_retsint16:
+        movsx eax, ax
+        jmp   ca_retint
 
 ca_retint:
         ;; Load %ecx with the pointer to storage for the return value
@@ -151,11 +171,31 @@
         fstp  TBYTE PTR [ecx]
         jmp   ca_epilogue
 
+ca_retstruct1b:
+        ;; Load %ecx with the pointer to storage for the return value
+        mov   ecx, rvalue
+        mov   [ecx + 0], al
+        jmp   ca_epilogue
+
+ca_retstruct2b:
+        ;; Load %ecx with the pointer to storage for the return value
+        mov   ecx, rvalue
+        mov   [ecx + 0], ax
+        jmp   ca_epilogue
+
 ca_epilogue:
         ;; Epilogue code is autogenerated.
         ret
 ffi_call_win32 ENDP
 
+ffi_closure_THISCALL PROC NEAR FORCEFRAME
+	sub	esp, 40
+	lea	edx, [ebp -24]
+	mov	[ebp - 12], edx	/* resp */
+	lea	edx, [ebp + 12]  /* account for stub return address on stack */
+	jmp	stub
+ffi_closure_THISCALL ENDP
+
 ffi_closure_SYSV PROC NEAR FORCEFRAME
     ;; the ffi_closure ctx is passed in eax by the trampoline.
 
@@ -163,6 +203,7 @@
         lea  edx, [ebp - 24]
         mov  [ebp - 12], edx         ;; resp
         lea  edx, [ebp + 8]
+stub::
         mov  [esp + 8], edx          ;; args
         lea  edx, [ebp - 12]
         mov  [esp + 4], edx          ;; &resp
@@ -179,26 +220,35 @@
         dd offset cs_retfloat       ;; FFI_TYPE_FLOAT
         dd offset cs_retdouble      ;; FFI_TYPE_DOUBLE
         dd offset cs_retlongdouble  ;; FFI_TYPE_LONGDOUBLE
-        dd offset cs_retint8        ;; FFI_TYPE_UINT8
-        dd offset cs_retint8        ;; FFI_TYPE_SINT8
-        dd offset cs_retint16       ;; FFI_TYPE_UINT16
-        dd offset cs_retint16       ;; FFI_TYPE_SINT16
+        dd offset cs_retuint8       ;; FFI_TYPE_UINT8
+        dd offset cs_retsint8       ;; FFI_TYPE_SINT8
+        dd offset cs_retuint16      ;; FFI_TYPE_UINT16
+        dd offset cs_retsint16      ;; FFI_TYPE_SINT16
         dd offset cs_retint         ;; FFI_TYPE_UINT32
         dd offset cs_retint         ;; FFI_TYPE_SINT32
         dd offset cs_retint64       ;; FFI_TYPE_UINT64
         dd offset cs_retint64       ;; FFI_TYPE_SINT64
         dd offset cs_retstruct      ;; FFI_TYPE_STRUCT
         dd offset cs_retint         ;; FFI_TYPE_POINTER
-        dd offset cs_retint8        ;; FFI_TYPE_SMALL_STRUCT_1B
-        dd offset cs_retint16       ;; FFI_TYPE_SMALL_STRUCT_2B
+        dd offset cs_retsint8       ;; FFI_TYPE_SMALL_STRUCT_1B
+        dd offset cs_retsint16      ;; FFI_TYPE_SMALL_STRUCT_2B
         dd offset cs_retint         ;; FFI_TYPE_SMALL_STRUCT_4B
+        dd offset cs_retmsstruct    ;; FFI_TYPE_MS_STRUCT
 
-cs_retint8:
-        mov   al, [ecx]
+cs_retuint8:
+        movzx eax, BYTE PTR [ecx]
         jmp   cs_epilogue
 
-cs_retint16:
-        mov   ax, [ecx]
+cs_retsint8:
+        movsx eax, BYTE PTR [ecx]
+        jmp   cs_epilogue
+
+cs_retuint16:
+        movzx eax, WORD PTR [ecx]
+        jmp   cs_epilogue
+
+cs_retsint16:
+        movsx eax, WORD PTR [ecx]
         jmp   cs_epilogue
 
 cs_retint:
@@ -227,6 +277,12 @@
         ;; Epilogue code is autogenerated.
         ret	4
 
+cs_retmsstruct:
+        ;; Caller expects us to return a pointer to the real return value.
+        mov   eax, ecx
+        ;; Caller doesn't expects us to pop struct return value pointer hidden arg.
+        jmp   cs_epilogue
+
 cs_epilogue:
         ;; Epilogue code is autogenerated.
         ret
@@ -239,7 +295,16 @@
 #define RAW_CLOSURE_USER_DATA_OFFSET (RAW_CLOSURE_FUN_OFFSET + 4)
 #define CIF_FLAGS_OFFSET 20
 
-ffi_closure_raw_SYSV PROC NEAR USES esi
+ffi_closure_raw_THISCALL PROC NEAR USES esi FORCEFRAME
+	sub esp, 36
+	mov  esi, [eax + RAW_CLOSURE_CIF_OFFSET]        ;; closure->cif
+	mov  edx, [eax + RAW_CLOSURE_USER_DATA_OFFSET]  ;; closure->user_data
+	mov [esp + 12], edx
+	lea edx, [ebp + 12]
+	jmp stubraw
+ffi_closure_raw_THISCALL ENDP
+
+ffi_closure_raw_SYSV PROC NEAR USES esi FORCEFRAME
     ;; the ffi_closure ctx is passed in eax by the trampoline.
 
         sub  esp, 40
@@ -247,6 +312,7 @@
         mov  edx, [eax + RAW_CLOSURE_USER_DATA_OFFSET]  ;; closure->user_data
         mov  [esp + 12], edx                            ;; user_data
         lea  edx, [ebp + 8]
+stubraw::
         mov  [esp + 8], edx                             ;; raw_args
         lea  edx, [ebp - 24]
         mov  [esp + 4], edx                             ;; &res
@@ -264,26 +330,35 @@
         dd offset cr_retfloat       ;; FFI_TYPE_FLOAT
         dd offset cr_retdouble      ;; FFI_TYPE_DOUBLE
         dd offset cr_retlongdouble  ;; FFI_TYPE_LONGDOUBLE
-        dd offset cr_retint8        ;; FFI_TYPE_UINT8
-        dd offset cr_retint8        ;; FFI_TYPE_SINT8
-        dd offset cr_retint16       ;; FFI_TYPE_UINT16
-        dd offset cr_retint16       ;; FFI_TYPE_SINT16
+        dd offset cr_retuint8       ;; FFI_TYPE_UINT8
+        dd offset cr_retsint8       ;; FFI_TYPE_SINT8
+        dd offset cr_retuint16      ;; FFI_TYPE_UINT16
+        dd offset cr_retsint16      ;; FFI_TYPE_SINT16
         dd offset cr_retint         ;; FFI_TYPE_UINT32
         dd offset cr_retint         ;; FFI_TYPE_SINT32
         dd offset cr_retint64       ;; FFI_TYPE_UINT64
         dd offset cr_retint64       ;; FFI_TYPE_SINT64
         dd offset cr_epilogue       ;; FFI_TYPE_STRUCT
         dd offset cr_retint         ;; FFI_TYPE_POINTER
-        dd offset cr_retint8        ;; FFI_TYPE_SMALL_STRUCT_1B
-        dd offset cr_retint16       ;; FFI_TYPE_SMALL_STRUCT_2B
+        dd offset cr_retsint8       ;; FFI_TYPE_SMALL_STRUCT_1B
+        dd offset cr_retsint16      ;; FFI_TYPE_SMALL_STRUCT_2B
         dd offset cr_retint         ;; FFI_TYPE_SMALL_STRUCT_4B
+        dd offset cr_epilogue       ;; FFI_TYPE_MS_STRUCT
 
-cr_retint8:
-        mov   al, [ecx]
+cr_retuint8:
+        movzx eax, BYTE PTR [ecx]
         jmp   cr_epilogue
 
-cr_retint16:
-        mov   ax, [ecx]
+cr_retsint8:
+        movsx eax, BYTE PTR [ecx]
+        jmp   cr_epilogue
+
+cr_retuint16:
+        movzx eax, WORD PTR [ecx]
+        jmp   cr_epilogue
+
+cr_retsint16:
+        movsx eax, WORD PTR [ecx]
         jmp   cr_epilogue
 
 cr_retint:
@@ -337,26 +412,34 @@
         dd offset cd_retfloat       ;; FFI_TYPE_FLOAT
         dd offset cd_retdouble      ;; FFI_TYPE_DOUBLE
         dd offset cd_retlongdouble  ;; FFI_TYPE_LONGDOUBLE
-        dd offset cd_retint8        ;; FFI_TYPE_UINT8
-        dd offset cd_retint8        ;; FFI_TYPE_SINT8
-        dd offset cd_retint16       ;; FFI_TYPE_UINT16
-        dd offset cd_retint16       ;; FFI_TYPE_SINT16
+        dd offset cd_retuint8       ;; FFI_TYPE_UINT8
+        dd offset cd_retsint8       ;; FFI_TYPE_SINT8
+        dd offset cd_retuint16      ;; FFI_TYPE_UINT16
+        dd offset cd_retsint16      ;; FFI_TYPE_SINT16
         dd offset cd_retint         ;; FFI_TYPE_UINT32
         dd offset cd_retint         ;; FFI_TYPE_SINT32
         dd offset cd_retint64       ;; FFI_TYPE_UINT64
         dd offset cd_retint64       ;; FFI_TYPE_SINT64
         dd offset cd_epilogue       ;; FFI_TYPE_STRUCT
         dd offset cd_retint         ;; FFI_TYPE_POINTER
-        dd offset cd_retint8        ;; FFI_TYPE_SMALL_STRUCT_1B
-        dd offset cd_retint16       ;; FFI_TYPE_SMALL_STRUCT_2B
+        dd offset cd_retsint8       ;; FFI_TYPE_SMALL_STRUCT_1B
+        dd offset cd_retsint16      ;; FFI_TYPE_SMALL_STRUCT_2B
         dd offset cd_retint         ;; FFI_TYPE_SMALL_STRUCT_4B
 
-cd_retint8:
-        mov   al, [ecx]
+cd_retuint8:
+        movzx eax, BYTE PTR [ecx]
         jmp   cd_epilogue
 
-cd_retint16:
-        mov   ax, [ecx]
+cd_retsint8:
+        movsx eax, BYTE PTR [ecx]
+        jmp   cd_epilogue
+
+cd_retuint16:
+        movzx eax, WORD PTR [ecx]
+        jmp   cd_epilogue
+
+cd_retsint16:
+        movsx eax, WORD PTR [ecx]
         jmp   cd_epilogue
 
 cd_retint:
@@ -395,7 +478,9 @@
         # This assumes we are using gas.
         .balign 16
 	.globl	_ffi_call_win32
+#ifndef __OS2__
 	.def	_ffi_call_win32;	.scl	2;	.type	32;	.endef
+#endif
 _ffi_call_win32:
 .LFB1:
         pushl %ebp
@@ -403,7 +488,7 @@
         movl  %esp,%ebp
 .LCFI1:
         # Make room for all of the new args.
-        movl  16(%ebp),%ecx                                                     
+        movl  20(%ebp),%ecx                                                     
         subl  %ecx,%esp
  
         movl  %esp,%eax
@@ -415,19 +500,34 @@
  
         # Return stack to previous state and call the function
         addl  $8,%esp
- 
+
+	# Handle fastcall and thiscall
+	cmpl $3, 16(%ebp)  # FFI_THISCALL
+	jz .do_thiscall
+	cmpl $4, 16(%ebp) # FFI_FASTCALL
+	jnz .do_fncall
+	movl (%esp), %ecx
+	movl 4(%esp), %edx
+	addl $8, %esp
+	jmp .do_fncall
+.do_thiscall:
+	movl (%esp), %ecx
+	addl $4, %esp
+
+.do_fncall:
+	 
         # FIXME: Align the stack to a 128-bit boundary to avoid
         # potential performance hits.
 
-        call  *28(%ebp)
+        call  *32(%ebp)
  
         # stdcall functions pop arguments off the stack themselves
 
         # Load %ecx with the return type code
-        movl  20(%ebp),%ecx
+        movl  24(%ebp),%ecx
  
         # If the return value pointer is NULL, assume no return value.
-        cmpl  $0,24(%ebp)
+        cmpl  $0,28(%ebp)
         jne   0f
  
         # Even if there is no space for the return value, we are
@@ -460,6 +560,7 @@
 	.long	.Lretstruct1b		/* FFI_TYPE_SMALL_STRUCT_1B */
 	.long	.Lretstruct2b		/* FFI_TYPE_SMALL_STRUCT_2B */
 	.long	.Lretstruct4b		/* FFI_TYPE_SMALL_STRUCT_4B */
+	.long	.Lretstruct		/* FFI_TYPE_MS_STRUCT */
 1:
 	add	%ecx, %ecx
 	add	%ecx, %ecx
@@ -486,50 +587,50 @@
 
 .Lretint:
         # Load %ecx with the pointer to storage for the return value
-        movl  24(%ebp),%ecx
+        movl  28(%ebp),%ecx
         movl  %eax,0(%ecx)
         jmp   .Lepilogue
  
 .Lretfloat:
          # Load %ecx with the pointer to storage for the return value
-        movl  24(%ebp),%ecx
+        movl  28(%ebp),%ecx
         fstps (%ecx)
         jmp   .Lepilogue
  
 .Lretdouble:
         # Load %ecx with the pointer to storage for the return value
-        movl  24(%ebp),%ecx
+        movl  28(%ebp),%ecx
         fstpl (%ecx)
         jmp   .Lepilogue
  
 .Lretlongdouble:
         # Load %ecx with the pointer to storage for the return value
-        movl  24(%ebp),%ecx
+        movl  28(%ebp),%ecx
         fstpt (%ecx)
         jmp   .Lepilogue
  
 .Lretint64:
         # Load %ecx with the pointer to storage for the return value
-        movl  24(%ebp),%ecx
+        movl  28(%ebp),%ecx
         movl  %eax,0(%ecx)
         movl  %edx,4(%ecx)
 	jmp   .Lepilogue
 
 .Lretstruct1b:
         # Load %ecx with the pointer to storage for the return value
-        movl  24(%ebp),%ecx
+        movl  28(%ebp),%ecx
         movb  %al,0(%ecx)
         jmp   .Lepilogue
  
 .Lretstruct2b:
         # Load %ecx with the pointer to storage for the return value
-        movl  24(%ebp),%ecx
+        movl  28(%ebp),%ecx
         movw  %ax,0(%ecx)
         jmp   .Lepilogue
 
 .Lretstruct4b:
         # Load %ecx with the pointer to storage for the return value
-        movl  24(%ebp),%ecx
+        movl  28(%ebp),%ecx
         movl  %eax,0(%ecx)
         jmp   .Lepilogue
 
@@ -542,12 +643,27 @@
         popl %ebp
         ret
 .ffi_call_win32_end:
+        .balign 16
+	.globl	_ffi_closure_THISCALL
+#ifndef __OS2__
+	.def	_ffi_closure_THISCALL;	.scl	2;	.type	32;	.endef
+#endif
+_ffi_closure_THISCALL:
+	pushl	%ebp
+	movl	%esp, %ebp
+	subl	$40, %esp
+	leal	-24(%ebp), %edx
+	movl	%edx, -12(%ebp)	/* resp */
+	leal	12(%ebp), %edx  /* account for stub return address on stack */
+	jmp	.stub
 .LFE1:
 
         # This assumes we are using gas.
         .balign 16
 	.globl	_ffi_closure_SYSV
+#ifndef __OS2__
 	.def	_ffi_closure_SYSV;	.scl	2;	.type	32;	.endef
+#endif
 _ffi_closure_SYSV:
 .LFB3:
 	pushl	%ebp
@@ -558,6 +674,7 @@
 	leal	-24(%ebp), %edx
 	movl	%edx, -12(%ebp)	/* resp */
 	leal	8(%ebp), %edx
+.stub:
 	movl	%edx, 4(%esp)	/* args = __builtin_dwarf_cfa () */
 	leal	-12(%ebp), %edx
 	movl	%edx, (%esp)	/* &resp */
@@ -586,6 +703,7 @@
 	.long	.Lcls_retstruct1	/* FFI_TYPE_SMALL_STRUCT_1B */
 	.long	.Lcls_retstruct2	/* FFI_TYPE_SMALL_STRUCT_2B */
 	.long	.Lcls_retstruct4	/* FFI_TYPE_SMALL_STRUCT_4B */
+	.long	.Lcls_retmsstruct	/* FFI_TYPE_MS_STRUCT */
 
 1:
 	add	%eax, %eax
@@ -650,6 +768,12 @@
 	popl	%ebp
 	ret	$0x4
 
+.Lcls_retmsstruct:
+	# Caller expects us to return a pointer to the real return value.
+	mov	%ecx, %eax
+	# Caller doesn't expects us to pop struct return value pointer hidden arg.
+	jmp	.Lcls_epilogue
+
 .Lcls_noretval:
 .Lcls_epilogue:
 	movl	%ebp, %esp
@@ -664,11 +788,27 @@
 #define RAW_CLOSURE_FUN_OFFSET (RAW_CLOSURE_CIF_OFFSET + 4)
 #define RAW_CLOSURE_USER_DATA_OFFSET (RAW_CLOSURE_FUN_OFFSET + 4)
 #define CIF_FLAGS_OFFSET 20
-
+        .balign 16
+	.globl	_ffi_closure_raw_THISCALL
+#ifndef __OS2__
+	.def	_ffi_closure_raw_THISCALL;	.scl	2;	.type	32;	.endef
+#endif
+_ffi_closure_raw_THISCALL:
+	pushl	%ebp
+	movl	%esp, %ebp
+	pushl	%esi
+	subl	$36, %esp
+	movl	RAW_CLOSURE_CIF_OFFSET(%eax), %esi	 /* closure->cif */
+	movl	RAW_CLOSURE_USER_DATA_OFFSET(%eax), %edx /* closure->user_data */
+	movl	%edx, 12(%esp)	/* user_data */
+	leal	12(%ebp), %edx	/* __builtin_dwarf_cfa () */
+	jmp	.stubraw
         # This assumes we are using gas.
         .balign 16
 	.globl	_ffi_closure_raw_SYSV
+#ifndef __OS2__
 	.def	_ffi_closure_raw_SYSV;	.scl	2;	.type	32;	.endef
+#endif
 _ffi_closure_raw_SYSV:
 .LFB4:
 	pushl	%ebp
@@ -682,6 +822,7 @@
 	movl	RAW_CLOSURE_USER_DATA_OFFSET(%eax), %edx /* closure->user_data */
 	movl	%edx, 12(%esp)	/* user_data */
 	leal	8(%ebp), %edx	/* __builtin_dwarf_cfa () */
+.stubraw:
 	movl	%edx, 8(%esp)	/* raw_args */
 	leal	-24(%ebp), %edx
 	movl	%edx, 4(%esp)	/* &res */
@@ -710,6 +851,7 @@
 	.long	.Lrcls_retstruct1	/* FFI_TYPE_SMALL_STRUCT_1B */
 	.long	.Lrcls_retstruct2	/* FFI_TYPE_SMALL_STRUCT_2B */
 	.long	.Lrcls_retstruct4	/* FFI_TYPE_SMALL_STRUCT_4B */
+	.long	.Lrcls_retstruct	/* FFI_TYPE_MS_STRUCT */
 1:
 	add	%eax, %eax
 	add	%eax, %eax
@@ -784,7 +926,9 @@
         # This assumes we are using gas.
 	.balign	16
 	.globl	_ffi_closure_STDCALL
+#ifndef __OS2__
 	.def	_ffi_closure_STDCALL;	.scl	2;	.type	32;	.endef
+#endif
 _ffi_closure_STDCALL:
 .LFB5:
 	pushl	%ebp
@@ -890,7 +1034,9 @@
 .ffi_closure_STDCALL_end:
 .LFE5:
 
+#ifndef __OS2__
 	.section	.eh_frame,"w"
+#endif
 .Lframe1:
 .LSCIE1:
 	.long	.LECIE1-.LASCIE1  /* Length of Common Information Entry */
diff --git a/Modules/_ctypes/libffi/src/x86/win64.S b/Modules/_ctypes/libffi/src/x86/win64.S
index 6e91818..fcdb270 100644
--- a/Modules/_ctypes/libffi/src/x86/win64.S
+++ b/Modules/_ctypes/libffi/src/x86/win64.S
@@ -232,10 +232,18 @@
 ffi_call_win64 ENDP
 _TEXT	ENDS
 END
-#else        
+
+#else
+
+#ifdef SYMBOL_UNDERSCORE
+#define SYMBOL_NAME(name) _##name
+#else
+#define SYMBOL_NAME(name) name
+#endif
+
 .text
 
-.extern _ffi_closure_win64_inner
+.extern SYMBOL_NAME(ffi_closure_win64_inner)
 
 # ffi_closure_win64 will be called with these registers set:
 #    rax points to 'closure'
@@ -246,8 +254,8 @@
 # call ffi_closure_win64_inner for the actual work, then return the result.
 # 
 	.balign 16
-        .globl _ffi_closure_win64	
-_ffi_closure_win64:     
+        .globl SYMBOL_NAME(ffi_closure_win64)
+SYMBOL_NAME(ffi_closure_win64):
 	# copy register arguments onto stack
 	test	$1,%r11
 	jne	.Lfirst_is_float	
@@ -287,7 +295,7 @@
 	mov	%rax, %rcx	# context is first parameter
 	mov	%rsp, %rdx	# stack is second parameter
 	add	$48, %rdx	# point to start of arguments
-	mov	$_ffi_closure_win64_inner, %rax
+	mov	$SYMBOL_NAME(ffi_closure_win64_inner), %rax
 	callq	*%rax		# call the real closure function
 	add	$40, %rsp
 	movq	%rax, %xmm0	# If the closure returned a float,
@@ -296,8 +304,8 @@
 .ffi_closure_win64_end:
 
 	.balign 16
-        .globl	_ffi_call_win64
-_ffi_call_win64:        
+        .globl	SYMBOL_NAME(ffi_call_win64)
+SYMBOL_NAME(ffi_call_win64):
         # copy registers onto stack
 	mov	%r9,32(%rsp)
 	mov	%r8,24(%rsp)
diff --git a/Modules/_ctypes/libffi/src/xtensa/ffi.c b/Modules/_ctypes/libffi/src/xtensa/ffi.c
new file mode 100644
index 0000000..fd94daf
--- /dev/null
+++ b/Modules/_ctypes/libffi/src/xtensa/ffi.c
@@ -0,0 +1,298 @@
+/* -----------------------------------------------------------------------
+   ffi.c - Copyright (c) 2013 Tensilica, Inc.
+
+   XTENSA Foreign Function Interface
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   ``Software''), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+   NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+   HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+   WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+   OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+   DEALINGS IN THE SOFTWARE.
+   ----------------------------------------------------------------------- */
+
+#include <ffi.h>
+#include <ffi_common.h>
+
+/*
+                                 |----------------------------------------|
+                                 |                                        |
+    on entry to ffi_call ---->   |----------------------------------------|
+                                 | caller stack frame for registers a0-a3 |
+                                 |----------------------------------------|
+                                 |                                        |
+                                 |         additional arguments           |
+    entry of the function --->   |----------------------------------------|
+                                 |    copy of function arguments a2-a7    |
+                                 | -  -  -  -  -  -  -  -  -  -  -  -  -  |
+                                 |                                        |
+
+    The area below the entry line becomes the new stack frame for the function.
+
+*/
+
+
+#define FFI_TYPE_STRUCT_REGS FFI_TYPE_LAST
+
+
+extern void ffi_call_SYSV(void *rvalue, unsigned rsize, unsigned flags,
+			  void(*fn)(void), unsigned nbytes, extended_cif*);
+extern void ffi_closure_SYSV(void) FFI_HIDDEN;
+
+ffi_status ffi_prep_cif_machdep(ffi_cif *cif)
+{
+  switch(cif->rtype->type) {
+    case FFI_TYPE_SINT8:
+    case FFI_TYPE_UINT8:
+    case FFI_TYPE_SINT16:
+    case FFI_TYPE_UINT16:
+      cif->flags = cif->rtype->type;
+      break;
+    case FFI_TYPE_VOID:
+    case FFI_TYPE_FLOAT:
+      cif->flags = FFI_TYPE_UINT32;
+      break;
+    case FFI_TYPE_DOUBLE:
+    case FFI_TYPE_UINT64:
+    case FFI_TYPE_SINT64:
+      cif->flags = FFI_TYPE_UINT64; // cif->rtype->type;
+      break;
+    case FFI_TYPE_STRUCT:
+      cif->flags = FFI_TYPE_STRUCT; //_REGS;
+      /* Up to 16 bytes are returned in registers */
+      if (cif->rtype->size > 4 * 4) {
+        /* returned structure is referenced by a register; use 8 bytes
+           (including 4 bytes for potential additional alignment) */
+        cif->flags = FFI_TYPE_STRUCT;	
+        cif->bytes += 8;
+      }
+      break;
+
+    default:
+      cif->flags = FFI_TYPE_UINT32;
+      break;
+  }
+
+  /* Round the stack up to a full 4 register frame, just in case
+     (we use this size in movsp). This way, it's also a  multiple of
+     8 bytes for 64-bit arguments.  */
+  cif->bytes = ALIGN(cif->bytes, 16);
+
+  return FFI_OK;
+}
+
+void ffi_prep_args(extended_cif *ecif, unsigned char* stack)
+{
+  unsigned int i;
+  unsigned long *addr;
+  ffi_type **ptr;
+
+  union {
+    void **v;
+    char **c;
+    signed char **sc;
+    unsigned char **uc;
+    signed short **ss;
+    unsigned short **us;
+    unsigned int **i;
+    long long **ll;
+    float **f;
+    double **d;
+  } p_argv;
+
+  /* Verify that everything is aligned up properly */
+  FFI_ASSERT (((unsigned long) stack & 0x7) == 0);
+
+  p_argv.v = ecif->avalue;
+  addr = (unsigned long*)stack;
+
+  /* structures with a size greater than 16 bytes are passed in memory */
+  if (ecif->cif->rtype->type == FFI_TYPE_STRUCT && ecif->cif->rtype->size > 16)
+  {
+    *addr++ = (unsigned long)ecif->rvalue;
+  }
+
+  for (i = ecif->cif->nargs, ptr = ecif->cif->arg_types;
+       i > 0;
+       i--, ptr++, p_argv.v++)
+  {
+    switch ((*ptr)->type)
+    {
+      case FFI_TYPE_SINT8:
+        *addr++ = **p_argv.sc;
+        break;
+      case FFI_TYPE_UINT8:
+        *addr++ = **p_argv.uc;
+        break;
+      case FFI_TYPE_SINT16:
+        *addr++ = **p_argv.ss;
+        break;
+      case FFI_TYPE_UINT16:
+        *addr++ = **p_argv.us;
+        break;
+      case FFI_TYPE_FLOAT:
+      case FFI_TYPE_INT:
+      case FFI_TYPE_UINT32:
+      case FFI_TYPE_SINT32:
+      case FFI_TYPE_POINTER:
+        *addr++ = **p_argv.i;
+        break;
+      case FFI_TYPE_DOUBLE:
+      case FFI_TYPE_UINT64:
+      case FFI_TYPE_SINT64:
+        if (((unsigned long)addr & 4) != 0)
+          addr++;
+        *(unsigned long long*)addr = **p_argv.ll;
+	addr += sizeof(unsigned long long) / sizeof (addr);
+        break;
+
+      case FFI_TYPE_STRUCT:
+      {
+        unsigned long offs;
+        unsigned long size;
+
+        if (((unsigned long)addr & 4) != 0 && (*ptr)->alignment > 4)
+          addr++;
+
+        offs = (unsigned long) addr - (unsigned long) stack;
+        size = (*ptr)->size;
+
+        /* Entire structure must fit the argument registers or referenced */
+        if (offs < FFI_REGISTER_NARGS * 4
+            && offs + size > FFI_REGISTER_NARGS * 4)
+          addr = (unsigned long*) (stack + FFI_REGISTER_NARGS * 4);
+
+        memcpy((char*) addr, *p_argv.c, size);
+        addr += (size + 3) / 4;
+        break;
+      }
+
+      default:
+        FFI_ASSERT(0);
+    }
+  }
+}
+
+
+void ffi_call(ffi_cif* cif, void(*fn)(void), void *rvalue, void **avalue)
+{
+  extended_cif ecif;
+  unsigned long rsize = cif->rtype->size;
+  int flags = cif->flags;
+  void *alloc = NULL;
+
+  ecif.cif = cif;
+  ecif.avalue = avalue;
+
+  /* Note that for structures that are returned in registers (size <= 16 bytes)
+     we allocate a temporary buffer and use memcpy to copy it to the final 
+     destination. The reason is that the target address might be misaligned or
+     the length not a multiple of 4 bytes. Handling all those cases would be
+     very complex.  */
+
+  if (flags == FFI_TYPE_STRUCT && (rsize <= 16 || rvalue == NULL))
+  {
+    alloc = alloca(ALIGN(rsize, 4));
+    ecif.rvalue = alloc;
+  }
+  else
+  {
+    ecif.rvalue = rvalue;
+  }
+
+  if (cif->abi != FFI_SYSV)
+    FFI_ASSERT(0);
+
+  ffi_call_SYSV (ecif.rvalue, rsize, cif->flags, fn, cif->bytes, &ecif);
+
+  if (alloc != NULL && rvalue != NULL)
+    memcpy(rvalue, alloc, rsize);
+}
+
+extern void ffi_trampoline();
+extern void ffi_cacheflush(void* start, void* end);
+
+ffi_status
+ffi_prep_closure_loc (ffi_closure* closure,
+                      ffi_cif* cif,
+                      void (*fun)(ffi_cif*, void*, void**, void*),
+                      void *user_data,
+                      void *codeloc)
+{
+  /* copye trampoline to stack and patch 'ffi_closure_SYSV' pointer */
+  memcpy(closure->tramp, ffi_trampoline, FFI_TRAMPOLINE_SIZE);
+  *(unsigned int*)(&closure->tramp[8]) = (unsigned int)ffi_closure_SYSV;
+
+  // Do we have this function?
+  // __builtin___clear_cache(closer->tramp, closer->tramp + FFI_TRAMPOLINE_SIZE)
+  ffi_cacheflush(closure->tramp, closure->tramp + FFI_TRAMPOLINE_SIZE);
+
+  closure->cif = cif;
+  closure->fun = fun;
+  closure->user_data = user_data;
+  return FFI_OK; 
+}
+
+
+long FFI_HIDDEN
+ffi_closure_SYSV_inner(ffi_closure *closure, void **values, void *rvalue)
+{
+  ffi_cif *cif;
+  ffi_type **arg_types;
+  void **avalue;
+  int i, areg;
+
+  cif = closure->cif;
+  if (cif->abi != FFI_SYSV)
+    return FFI_BAD_ABI;
+
+  areg = 0;
+
+  int rtype = cif->rtype->type;
+  if (rtype == FFI_TYPE_STRUCT && cif->rtype->size > 4 * 4)
+  {
+    rvalue = *values;
+    areg++;
+  }
+
+  cif = closure->cif; 
+  arg_types = cif->arg_types;
+  avalue = alloca(cif->nargs * sizeof(void *));
+
+  for (i = 0; i < cif->nargs; i++)
+  {
+    if (arg_types[i]->alignment == 8 && (areg & 1) != 0)
+      areg++;
+
+    // skip the entry 16,a1 framework, add 16 bytes (4 registers)
+    if (areg == FFI_REGISTER_NARGS)
+      areg += 4;
+
+    if (arg_types[i]->type == FFI_TYPE_STRUCT)
+    {
+      int numregs = ((arg_types[i]->size + 3) & ~3) / 4;
+      if (areg < FFI_REGISTER_NARGS && areg + numregs > FFI_REGISTER_NARGS)
+        areg = FFI_REGISTER_NARGS + 4;
+    }
+
+    avalue[i] = &values[areg];
+    areg += (arg_types[i]->size + 3) / 4;
+  }
+
+  (closure->fun)(cif, rvalue, avalue, closure->user_data);
+
+  return rtype;
+}
diff --git a/Modules/_ctypes/libffi/src/xtensa/ffitarget.h b/Modules/_ctypes/libffi/src/xtensa/ffitarget.h
new file mode 100644
index 0000000..0ba728b
--- /dev/null
+++ b/Modules/_ctypes/libffi/src/xtensa/ffitarget.h
@@ -0,0 +1,53 @@
+/* -----------------------------------------------------------------*-C-*-
+   ffitarget.h - Copyright (c) 2013 Tensilica, Inc.
+   Target configuration macros for XTENSA.
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   ``Software''), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+   NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+   HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+   WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+   OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+   DEALINGS IN THE SOFTWARE.
+   ----------------------------------------------------------------------- */
+
+#ifndef LIBFFI_TARGET_H
+#define LIBFFI_TARGET_H
+
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
+#ifndef LIBFFI_ASM
+typedef unsigned long	ffi_arg;
+typedef signed long	ffi_sarg;
+
+typedef enum ffi_abi {
+  FFI_FIRST_ABI = 0,
+  FFI_SYSV,
+  FFI_LAST_ABI,
+  FFI_DEFAULT_ABI = FFI_SYSV
+} ffi_abi;
+#endif
+
+#define FFI_REGISTER_NARGS	6
+
+/* ---- Definitions for closures ----------------------------------------- */
+
+#define FFI_CLOSURES 1
+#define FFI_NATIVE_RAW_API 0
+#define FFI_TRAMPOLINE_SIZE 24
+
+#endif
diff --git a/Modules/_ctypes/libffi/src/xtensa/sysv.S b/Modules/_ctypes/libffi/src/xtensa/sysv.S
new file mode 100644
index 0000000..64e6a09
--- /dev/null
+++ b/Modules/_ctypes/libffi/src/xtensa/sysv.S
@@ -0,0 +1,253 @@
+/* -----------------------------------------------------------------------
+   sysv.S - Copyright (c) 2013 Tensilica, Inc.
+   
+   XTENSA Foreign Function Interface 
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   ``Software''), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+   NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+   HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+   WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+   OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+   DEALINGS IN THE SOFTWARE.
+   ----------------------------------------------------------------------- */
+
+#define LIBFFI_ASM
+#include <fficonfig.h>
+#include <ffi.h>
+
+#define ENTRY(name) .text; .globl name; .type  name,@function; .align 4; name:
+#define END(name) .size name , . - name
+
+/* Assert that the table below is in sync with ffi.h.  */
+
+#if	   FFI_TYPE_UINT8 != 5          \
+        || FFI_TYPE_SINT8 != 6          \
+        || FFI_TYPE_UINT16 != 7         \
+        || FFI_TYPE_SINT16 != 8         \
+        || FFI_TYPE_UINT32 != 9         \
+        || FFI_TYPE_SINT32 != 10        \
+        || FFI_TYPE_UINT64 != 11
+#error "xtensa/sysv.S out of sync with ffi.h"
+#endif
+
+
+/* ffi_call_SYSV (rvalue, rbytes, flags, (*fnaddr)(), bytes, ecif)
+      void *rvalue;            a2
+      unsigned long rbytes;    a3
+      unsigned flags;          a4
+      void (*fnaddr)();        a5
+      unsigned long bytes;     a6
+      extended_cif* ecif)      a7
+*/
+
+ENTRY(ffi_call_SYSV)
+
+	entry	a1, 32              # 32 byte frame for using call8 below
+
+	mov	a10, a7             # a10(->arg0): ecif
+	sub	a11, a1, a6         # a11(->arg1): stack pointer
+	mov	a7, a1              # fp
+	movsp	a1, a11             # set new sp = old_sp - bytes
+
+	movi	a8, ffi_prep_args
+	callx8	a8                  # ffi_prep_args(ecif, stack)
+
+	# prepare to move stack pointer back up to 6 arguments
+	# note that 'bytes' is already aligned
+
+	movi	a10, 6*4 
+	sub	a11, a6, a10
+	movgez	a6, a10, a11
+	add	a6, a1, a6
+
+	
+	# we can pass up to 6 arguments in registers
+	# for simplicity, just load 6 arguments
+	# (the stack size is at least 32 bytes, so no risk to cross boundaries)
+
+	l32i	a10, a1, 0
+	l32i	a11, a1, 4
+	l32i	a12, a1, 8
+	l32i	a13, a1, 12
+	l32i	a14, a1, 16
+	l32i	a15, a1, 20
+
+	# move stack pointer
+
+	movsp	a1, a6
+
+	callx8	a5                  # (*fn)(args...)
+
+	# Handle return value(s)
+
+	beqz	a2, .Lexit
+
+	movi	a5, FFI_TYPE_STRUCT
+	bne	a4, a5, .Lstore
+	movi	a5, 16
+	blt	a5, a3, .Lexit
+
+	s32i	a10, a2, 0
+	blti	a3, 5, .Lexit
+	addi	a3, a3, -1
+	s32i	a11, a2, 4
+	blti	a3, 8, .Lexit
+	s32i	a12, a2, 8
+	blti	a3, 12, .Lexit
+	s32i	a13, a2, 12
+
+.Lexit:	retw
+
+.Lstore:
+	addi	a4, a4, -FFI_TYPE_UINT8
+	bgei	a4, 7, .Lexit	# should never happen
+	movi	a6, store_calls
+	add	a4, a4, a4
+	addx4	a6, a4, a6	# store_table + idx * 8
+	jx	a6
+
+	.align	8
+store_calls:
+	# UINT8
+	s8i	a10, a2, 0
+	retw
+
+	# SINT8
+	.align	8
+	s8i	a10, a2, 0
+	retw
+
+	# UINT16
+	.align	8
+	s16i	a10, a2, 0
+	retw
+
+	# SINT16
+	.align	8
+	s16i	a10, a2, 0
+	retw
+
+	# UINT32
+	.align	8
+	s32i	a10, a2, 0
+	retw
+
+	# SINT32
+	.align	8
+	s32i	a10, a2, 0
+	retw
+
+	# UINT64
+	.align	8
+	s32i	a10, a2, 0
+	s32i	a11, a2, 4
+	retw
+
+END(ffi_call_SYSV)
+
+
+/*
+ * void ffi_cacheflush (unsigned long start, unsigned long end)
+ */
+
+#define EXTRA_ARGS_SIZE	24
+
+ENTRY(ffi_cacheflush)
+
+	entry	a1, 16
+
+1:	dhwbi	a2, 0
+	ihi	a2, 0
+	addi	a2, a2, 4
+	blt	a2, a3, 1b
+
+	retw
+
+END(ffi_cacheflush)
+
+/* ffi_trampoline is copied to the stack */
+
+ENTRY(ffi_trampoline)
+
+	entry	a1, 16 + (FFI_REGISTER_NARGS * 4) + (4 * 4)   # [ 0]
+	j	2f                                # [ 3]
+	.align	4                                 # [ 6]
+1:	.long	0                                 # [ 8]
+2:	l32r	a15, 1b                           # [12]
+	_mov 	a14, a0                           # [15]
+	callx0	a15                               # [18]
+                                                  # [21]
+END(ffi_trampoline)
+
+/*
+ * ffi_closure()
+ *
+ * a0:  closure + 21
+ * a14: return address (a0)
+ */
+
+ENTRY(ffi_closure_SYSV)
+
+	/* intentionally omitting entry here */
+
+	# restore return address (a0) and move pointer to closure to a10
+	addi	a10, a0, -21
+	mov	a0, a14
+
+	# allow up to 4 arguments as return values
+	addi	a11, a1, 4 * 4
+
+	# save up to 6 arguments to stack (allocated by entry below)
+	s32i	a2, a11,  0
+	s32i	a3, a11,  4
+	s32i	a4, a11,  8
+	s32i	a5, a11, 12
+	s32i	a6, a11, 16
+	s32i	a7, a11, 20
+
+	movi	a8, ffi_closure_SYSV_inner
+	mov	a12, a1
+	callx8	a8			# .._inner(*closure, **avalue, *rvalue)
+
+	# load up to four return arguments
+	l32i	a2, a1,  0
+	l32i	a3, a1,  4
+	l32i	a4, a1,  8
+	l32i	a5, a1, 12
+
+	# (sign-)extend return value
+	movi	a11, FFI_TYPE_UINT8
+	bne	a10, a11, 1f
+	extui	a2, a2, 0, 8
+	retw
+
+1:	movi	a11, FFI_TYPE_SINT8
+	bne	a10, a11, 1f
+	sext	a2, a2, 7
+	retw
+
+1:	movi	a11, FFI_TYPE_UINT16
+	bne	a10, a11, 1f
+	extui	a2, a2, 0, 16
+	retw
+
+1:	movi	a11, FFI_TYPE_SINT16
+	bne	a10, a11, 1f
+	sext	a2, a2, 15
+
+1:	retw
+
+END(ffi_closure_SYSV)
diff --git a/Modules/_ctypes/libffi/stamp-h.in b/Modules/_ctypes/libffi/stamp-h.in
new file mode 100644
index 0000000..9788f70
--- /dev/null
+++ b/Modules/_ctypes/libffi/stamp-h.in
@@ -0,0 +1 @@
+timestamp
diff --git a/Modules/_ctypes/libffi/testsuite/Makefile.am b/Modules/_ctypes/libffi/testsuite/Makefile.am
index eae3d74..edc6e61 100644
--- a/Modules/_ctypes/libffi/testsuite/Makefile.am
+++ b/Modules/_ctypes/libffi/testsuite/Makefile.am
@@ -13,68 +13,82 @@
 
 AM_RUNTESTFLAGS =
 
+EXTRA_DEJAGNU_SITE_CONFIG=../local.exp
+
 CLEANFILES = *.exe core* *.log *.sum
 
-EXTRA_DIST = libffi.special/special.exp	\
-libffi.special/unwindtest_ffi_call.cc libffi.special/unwindtest.cc \
-libffi.special/ffitestcxx.h config/default.exp lib/target-libpath.exp \
-lib/libffi-dg.exp lib/wrapper.exp libffi.call/float.c \
-libffi.call/cls_multi_schar.c libffi.call/float3.c \
-libffi.call/cls_3_1byte.c libffi.call/stret_large2.c \
-libffi.call/cls_5_1_byte.c libffi.call/stret_medium.c \
-libffi.call/promotion.c libffi.call/cls_dbls_struct.c \
-libffi.call/nested_struct.c libffi.call/closure_fn1.c \
-libffi.call/cls_4_1byte.c libffi.call/cls_float.c \
-libffi.call/cls_2byte.c libffi.call/closure_fn4.c \
-libffi.call/return_fl2.c libffi.call/nested_struct7.c \
-libffi.call/cls_uint.c libffi.call/cls_align_sint64.c \
-libffi.call/float1.c libffi.call/cls_19byte.c \
-libffi.call/nested_struct1.c libffi.call/cls_4byte.c \
-libffi.call/return_fl1.c libffi.call/cls_align_pointer.c \
-libffi.call/nested_struct4.c libffi.call/nested_struct3.c \
-libffi.call/struct7.c libffi.call/nested_struct9.c \
-libffi.call/cls_sshort.c libffi.call/cls_ulonglong.c \
-libffi.call/cls_pointer_stack.c libffi.call/cls_multi_uchar.c \
-libffi.call/testclosure.c libffi.call/cls_3byte1.c \
-libffi.call/struct6.c libffi.call/return_uc.c libffi.call/return_ll1.c \
-libffi.call/cls_ushort.c libffi.call/stret_medium2.c \
-libffi.call/cls_multi_ushortchar.c libffi.call/return_dbl2.c \
-libffi.call/closure_loc_fn0.c libffi.call/return_sc.c \
-libffi.call/nested_struct8.c libffi.call/cls_7_1_byte.c	\
-libffi.call/return_ll.c libffi.call/cls_pointer.c \
-libffi.call/err_bad_abi.c libffi.call/return_dbl1.c \
-libffi.call/call.exp libffi.call/ffitest.h libffi.call/strlen.c	\
-libffi.call/return_sl.c libffi.call/cls_1_1byte.c \
-libffi.call/struct1.c libffi.call/cls_64byte.c libffi.call/return_ul.c \
-libffi.call/cls_double.c libffi.call/many_win32.c \
-libffi.call/cls_16byte.c libffi.call/cls_align_double.c	\
-libffi.call/cls_align_uint16.c libffi.call/cls_9byte1.c	\
-libffi.call/cls_multi_sshortchar.c libffi.call/cls_multi_ushort.c \
-libffi.call/closure_stdcall.c libffi.call/return_fl.c \
-libffi.call/strlen_win32.c libffi.call/return_ldl.c \
-libffi.call/cls_align_float.c libffi.call/struct3.c \
-libffi.call/cls_uchar.c libffi.call/cls_sint.c libffi.call/float2.c \
-libffi.call/cls_align_longdouble_split.c \
-libffi.call/cls_longdouble_va.c libffi.call/cls_multi_sshort.c \
-libffi.call/stret_large.c libffi.call/cls_align_sint16.c \
-libffi.call/nested_struct6.c libffi.call/cls_5byte.c \
-libffi.call/return_dbl.c libffi.call/cls_20byte.c \
-libffi.call/cls_8byte.c libffi.call/pyobjc-tc.c	\
-libffi.call/cls_24byte.c libffi.call/cls_align_longdouble_split2.c \
-libffi.call/cls_6_1_byte.c libffi.call/cls_schar.c \
-libffi.call/cls_18byte.c libffi.call/closure_fn3.c \
-libffi.call/err_bad_typedef.c libffi.call/closure_fn2.c	\
-libffi.call/struct2.c libffi.call/cls_3byte2.c \
-libffi.call/cls_align_longdouble.c libffi.call/cls_20byte1.c \
-libffi.call/return_fl3.c libffi.call/cls_align_uint32.c	\
-libffi.call/problem1.c libffi.call/float4.c \
-libffi.call/cls_align_uint64.c libffi.call/struct9.c \
-libffi.call/closure_fn5.c libffi.call/cls_align_sint32.c \
-libffi.call/closure_fn0.c libffi.call/closure_fn6.c \
-libffi.call/struct4.c libffi.call/nested_struct2.c \
-libffi.call/cls_6byte.c libffi.call/cls_7byte.c libffi.call/many.c \
-libffi.call/struct8.c libffi.call/negint.c libffi.call/struct5.c \
-libffi.call/cls_12byte.c libffi.call/cls_double_va.c \
-libffi.call/cls_longdouble.c libffi.call/cls_9byte2.c \
-libffi.call/nested_struct10.c libffi.call/nested_struct5.c \
-libffi.call/huge_struct.c
+EXTRA_DIST = config/default.exp libffi.call/cls_19byte.c		\
+libffi.call/cls_align_longdouble_split.c				\
+libffi.call/closure_loc_fn0.c libffi.call/cls_schar.c			\
+libffi.call/closure_fn1.c libffi.call/many2_win32.c			\
+libffi.call/return_ul.c libffi.call/cls_align_double.c			\
+libffi.call/return_fl2.c libffi.call/cls_1_1byte.c			\
+libffi.call/cls_64byte.c libffi.call/nested_struct7.c			\
+libffi.call/cls_align_sint32.c libffi.call/nested_struct2.c		\
+libffi.call/ffitest.h libffi.call/nested_struct4.c			\
+libffi.call/cls_multi_ushort.c libffi.call/struct3.c			\
+libffi.call/cls_3byte1.c libffi.call/cls_16byte.c			\
+libffi.call/struct8.c libffi.call/nested_struct8.c			\
+libffi.call/cls_multi_sshort.c libffi.call/cls_3byte2.c			\
+libffi.call/fastthis2_win32.c libffi.call/cls_pointer.c			\
+libffi.call/err_bad_typedef.c libffi.call/cls_4_1byte.c			\
+libffi.call/cls_9byte2.c libffi.call/cls_multi_schar.c			\
+libffi.call/stret_medium2.c libffi.call/cls_5_1_byte.c			\
+libffi.call/call.exp libffi.call/cls_double.c				\
+libffi.call/cls_align_sint16.c libffi.call/cls_uint.c			\
+libffi.call/return_ll1.c libffi.call/nested_struct3.c			\
+libffi.call/cls_20byte1.c libffi.call/closure_fn4.c			\
+libffi.call/cls_uchar.c libffi.call/struct2.c libffi.call/cls_7byte.c	\
+libffi.call/strlen.c libffi.call/many.c libffi.call/testclosure.c	\
+libffi.call/return_fl.c libffi.call/struct5.c				\
+libffi.call/cls_12byte.c libffi.call/cls_multi_sshortchar.c		\
+libffi.call/cls_align_longdouble_split2.c libffi.call/return_dbl2.c	\
+libffi.call/return_fl3.c libffi.call/stret_medium.c			\
+libffi.call/nested_struct6.c libffi.call/closure_fn3.c			\
+libffi.call/float3.c libffi.call/many2.c				\
+libffi.call/closure_stdcall.c libffi.call/cls_align_uint16.c		\
+libffi.call/cls_9byte1.c libffi.call/closure_fn6.c			\
+libffi.call/cls_double_va.c libffi.call/cls_align_pointer.c		\
+libffi.call/cls_align_longdouble.c libffi.call/closure_fn2.c		\
+libffi.call/cls_sshort.c libffi.call/many_win32.c			\
+libffi.call/nested_struct.c libffi.call/cls_20byte.c			\
+libffi.call/cls_longdouble.c libffi.call/cls_multi_uchar.c		\
+libffi.call/return_uc.c libffi.call/closure_thiscall.c			\
+libffi.call/cls_18byte.c libffi.call/cls_8byte.c			\
+libffi.call/promotion.c libffi.call/struct1_win32.c			\
+libffi.call/return_dbl.c libffi.call/cls_24byte.c			\
+libffi.call/struct4.c libffi.call/cls_6byte.c				\
+libffi.call/cls_align_uint32.c libffi.call/float.c			\
+libffi.call/float1.c libffi.call/float_va.c libffi.call/negint.c	\
+libffi.call/return_dbl1.c libffi.call/cls_3_1byte.c			\
+libffi.call/cls_align_float.c libffi.call/return_fl1.c			\
+libffi.call/nested_struct10.c libffi.call/nested_struct5.c		\
+libffi.call/fastthis1_win32.c libffi.call/cls_align_sint64.c		\
+libffi.call/stret_large2.c libffi.call/return_sl.c			\
+libffi.call/closure_fn0.c libffi.call/cls_5byte.c			\
+libffi.call/cls_2byte.c libffi.call/float2.c				\
+libffi.call/cls_dbls_struct.c libffi.call/cls_sint.c			\
+libffi.call/stret_large.c libffi.call/cls_ulonglong.c			\
+libffi.call/cls_ushort.c libffi.call/nested_struct1.c			\
+libffi.call/err_bad_abi.c libffi.call/cls_longdouble_va.c		\
+libffi.call/cls_float.c libffi.call/cls_pointer_stack.c		\
+libffi.call/pyobjc-tc.c libffi.call/cls_multi_ushortchar.c		\
+libffi.call/struct1.c libffi.call/nested_struct9.c			\
+libffi.call/huge_struct.c libffi.call/problem1.c			\
+libffi.call/float4.c libffi.call/fastthis3_win32.c			\
+libffi.call/return_ldl.c libffi.call/strlen2_win32.c			\
+libffi.call/closure_fn5.c libffi.call/struct2_win32.c			\
+libffi.call/struct6.c libffi.call/return_ll.c libffi.call/struct9.c	\
+libffi.call/return_sc.c libffi.call/struct7.c				\
+libffi.call/cls_align_uint64.c libffi.call/cls_4byte.c			\
+libffi.call/strlen_win32.c libffi.call/cls_6_1_byte.c			\
+libffi.call/cls_7_1_byte.c libffi.special/unwindtest.cc			\
+libffi.special/special.exp libffi.special/unwindtest_ffi_call.cc	\
+libffi.special/ffitestcxx.h lib/wrapper.exp lib/target-libpath.exp	\
+lib/libffi.exp libffi.call/cls_struct_va1.c				\
+libffi.call/cls_uchar_va.c libffi.call/cls_uint_va.c			\
+libffi.call/cls_ulong_va.c libffi.call/cls_ushort_va.c			\
+libffi.call/nested_struct11.c libffi.call/uninitialized.c		\
+libffi.call/va_1.c libffi.call/va_struct1.c libffi.call/va_struct2.c	\
+libffi.call/va_struct3.c
+
diff --git a/Modules/_ctypes/libffi/testsuite/Makefile.in b/Modules/_ctypes/libffi/testsuite/Makefile.in
index 698c461..a3ba066 100644
--- a/Modules/_ctypes/libffi/testsuite/Makefile.in
+++ b/Modules/_ctypes/libffi/testsuite/Makefile.in
@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11 from Makefile.am.
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,6 +14,23 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
+am__make_dryrun = \
+  { \
+    am__dry=no; \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+      *) \
+        for am__flg in $$MAKEFLAGS; do \
+          case $$am__flg in \
+            *=*|--*) ;; \
+            *n*) am__dry=yes; break;; \
+          esac; \
+        done;; \
+    esac; \
+    test $$am__dry = yes; \
+  }
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -37,7 +53,19 @@
 subdir = testsuite
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+am__aclocal_m4_deps = $(top_srcdir)/m4/asmcfi.m4 \
+	$(top_srcdir)/m4/ax_append_flag.m4 \
+	$(top_srcdir)/m4/ax_cc_maxopt.m4 \
+	$(top_srcdir)/m4/ax_cflags_warn_all.m4 \
+	$(top_srcdir)/m4/ax_check_compile_flag.m4 \
+	$(top_srcdir)/m4/ax_compiler_vendor.m4 \
+	$(top_srcdir)/m4/ax_configure_args.m4 \
+	$(top_srcdir)/m4/ax_enable_builddir.m4 \
+	$(top_srcdir)/m4/ax_gcc_archflag.m4 \
+	$(top_srcdir)/m4/ax_gcc_x86_cpuid.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/acinclude.m4 \
 	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
@@ -47,12 +75,18 @@
 CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
 DEJATOOL = $(PACKAGE)
 RUNTESTDEFAULTFLAGS = --tool $$tool --srcdir $$srcdir
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 ALLOCA = @ALLOCA@
 AMTAR = @AMTAR@
+AM_LTLDFLAGS = @AM_LTLDFLAGS@
 AM_RUNTESTFLAGS = 
 AR = @AR@
 AUTOCONF = @AUTOCONF@
@@ -70,6 +104,7 @@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
 DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
@@ -77,6 +112,7 @@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
+FFI_EXEC_TRAMPOLINE_TABLE = @FFI_EXEC_TRAMPOLINE_TABLE@
 FGREP = @FGREP@
 GREP = @GREP@
 HAVE_LONG_DOUBLE = @HAVE_LONG_DOUBLE@
@@ -95,6 +131,7 @@
 LTLIBOBJS = @LTLIBOBJS@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
 NM = @NM@
 NMEDIT = @NMEDIT@
@@ -107,8 +144,10 @@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
+PRTDIAG = @PRTDIAG@
 RANLIB = @RANLIB@
 SED = @SED@
 SET_MAKE = @SET_MAKE@
@@ -121,6 +160,7 @@
 abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 am__include = @am__include@
@@ -128,6 +168,7 @@
 am__quote = @am__quote@
 am__tar = @am__tar@
 am__untar = @am__untar@
+ax_enable_builddir_sed = @ax_enable_builddir_sed@
 bindir = @bindir@
 build = @build@
 build_alias = @build_alias@
@@ -153,7 +194,6 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -164,6 +204,7 @@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
+sys_symbol_underscore = @sys_symbol_underscore@
 sysconfdir = @sysconfdir@
 target = @target@
 target_alias = @target_alias@
@@ -186,70 +227,82 @@
 	       echo $(top_srcdir)/../dejagnu/runtest ; \
 	    else echo runtest; fi`
 
+EXTRA_DEJAGNU_SITE_CONFIG = ../local.exp
 CLEANFILES = *.exe core* *.log *.sum
-EXTRA_DIST = libffi.special/special.exp	\
-libffi.special/unwindtest_ffi_call.cc libffi.special/unwindtest.cc \
-libffi.special/ffitestcxx.h config/default.exp lib/target-libpath.exp \
-lib/libffi-dg.exp lib/wrapper.exp libffi.call/float.c \
-libffi.call/cls_multi_schar.c libffi.call/float3.c \
-libffi.call/cls_3_1byte.c libffi.call/stret_large2.c \
-libffi.call/cls_5_1_byte.c libffi.call/stret_medium.c \
-libffi.call/promotion.c libffi.call/cls_dbls_struct.c \
-libffi.call/nested_struct.c libffi.call/closure_fn1.c \
-libffi.call/cls_4_1byte.c libffi.call/cls_float.c \
-libffi.call/cls_2byte.c libffi.call/closure_fn4.c \
-libffi.call/return_fl2.c libffi.call/nested_struct7.c \
-libffi.call/cls_uint.c libffi.call/cls_align_sint64.c \
-libffi.call/float1.c libffi.call/cls_19byte.c \
-libffi.call/nested_struct1.c libffi.call/cls_4byte.c \
-libffi.call/return_fl1.c libffi.call/cls_align_pointer.c \
-libffi.call/nested_struct4.c libffi.call/nested_struct3.c \
-libffi.call/struct7.c libffi.call/nested_struct9.c \
-libffi.call/cls_sshort.c libffi.call/cls_ulonglong.c \
-libffi.call/cls_pointer_stack.c libffi.call/cls_multi_uchar.c \
-libffi.call/testclosure.c libffi.call/cls_3byte1.c \
-libffi.call/struct6.c libffi.call/return_uc.c libffi.call/return_ll1.c \
-libffi.call/cls_ushort.c libffi.call/stret_medium2.c \
-libffi.call/cls_multi_ushortchar.c libffi.call/return_dbl2.c \
-libffi.call/closure_loc_fn0.c libffi.call/return_sc.c \
-libffi.call/nested_struct8.c libffi.call/cls_7_1_byte.c	\
-libffi.call/return_ll.c libffi.call/cls_pointer.c \
-libffi.call/err_bad_abi.c libffi.call/return_dbl1.c \
-libffi.call/call.exp libffi.call/ffitest.h libffi.call/strlen.c	\
-libffi.call/return_sl.c libffi.call/cls_1_1byte.c \
-libffi.call/struct1.c libffi.call/cls_64byte.c libffi.call/return_ul.c \
-libffi.call/cls_double.c libffi.call/many_win32.c \
-libffi.call/cls_16byte.c libffi.call/cls_align_double.c	\
-libffi.call/cls_align_uint16.c libffi.call/cls_9byte1.c	\
-libffi.call/cls_multi_sshortchar.c libffi.call/cls_multi_ushort.c \
-libffi.call/closure_stdcall.c libffi.call/return_fl.c \
-libffi.call/strlen_win32.c libffi.call/return_ldl.c \
-libffi.call/cls_align_float.c libffi.call/struct3.c \
-libffi.call/cls_uchar.c libffi.call/cls_sint.c libffi.call/float2.c \
-libffi.call/cls_align_longdouble_split.c \
-libffi.call/cls_longdouble_va.c libffi.call/cls_multi_sshort.c \
-libffi.call/stret_large.c libffi.call/cls_align_sint16.c \
-libffi.call/nested_struct6.c libffi.call/cls_5byte.c \
-libffi.call/return_dbl.c libffi.call/cls_20byte.c \
-libffi.call/cls_8byte.c libffi.call/pyobjc-tc.c	\
-libffi.call/cls_24byte.c libffi.call/cls_align_longdouble_split2.c \
-libffi.call/cls_6_1_byte.c libffi.call/cls_schar.c \
-libffi.call/cls_18byte.c libffi.call/closure_fn3.c \
-libffi.call/err_bad_typedef.c libffi.call/closure_fn2.c	\
-libffi.call/struct2.c libffi.call/cls_3byte2.c \
-libffi.call/cls_align_longdouble.c libffi.call/cls_20byte1.c \
-libffi.call/return_fl3.c libffi.call/cls_align_uint32.c	\
-libffi.call/problem1.c libffi.call/float4.c \
-libffi.call/cls_align_uint64.c libffi.call/struct9.c \
-libffi.call/closure_fn5.c libffi.call/cls_align_sint32.c \
-libffi.call/closure_fn0.c libffi.call/closure_fn6.c \
-libffi.call/struct4.c libffi.call/nested_struct2.c \
-libffi.call/cls_6byte.c libffi.call/cls_7byte.c libffi.call/many.c \
-libffi.call/struct8.c libffi.call/negint.c libffi.call/struct5.c \
-libffi.call/cls_12byte.c libffi.call/cls_double_va.c \
-libffi.call/cls_longdouble.c libffi.call/cls_9byte2.c \
-libffi.call/nested_struct10.c libffi.call/nested_struct5.c \
-libffi.call/huge_struct.c
+EXTRA_DIST = config/default.exp libffi.call/cls_19byte.c		\
+libffi.call/cls_align_longdouble_split.c				\
+libffi.call/closure_loc_fn0.c libffi.call/cls_schar.c			\
+libffi.call/closure_fn1.c libffi.call/many2_win32.c			\
+libffi.call/return_ul.c libffi.call/cls_align_double.c			\
+libffi.call/return_fl2.c libffi.call/cls_1_1byte.c			\
+libffi.call/cls_64byte.c libffi.call/nested_struct7.c			\
+libffi.call/cls_align_sint32.c libffi.call/nested_struct2.c		\
+libffi.call/ffitest.h libffi.call/nested_struct4.c			\
+libffi.call/cls_multi_ushort.c libffi.call/struct3.c			\
+libffi.call/cls_3byte1.c libffi.call/cls_16byte.c			\
+libffi.call/struct8.c libffi.call/nested_struct8.c			\
+libffi.call/cls_multi_sshort.c libffi.call/cls_3byte2.c			\
+libffi.call/fastthis2_win32.c libffi.call/cls_pointer.c			\
+libffi.call/err_bad_typedef.c libffi.call/cls_4_1byte.c			\
+libffi.call/cls_9byte2.c libffi.call/cls_multi_schar.c			\
+libffi.call/stret_medium2.c libffi.call/cls_5_1_byte.c			\
+libffi.call/call.exp libffi.call/cls_double.c				\
+libffi.call/cls_align_sint16.c libffi.call/cls_uint.c			\
+libffi.call/return_ll1.c libffi.call/nested_struct3.c			\
+libffi.call/cls_20byte1.c libffi.call/closure_fn4.c			\
+libffi.call/cls_uchar.c libffi.call/struct2.c libffi.call/cls_7byte.c	\
+libffi.call/strlen.c libffi.call/many.c libffi.call/testclosure.c	\
+libffi.call/return_fl.c libffi.call/struct5.c				\
+libffi.call/cls_12byte.c libffi.call/cls_multi_sshortchar.c		\
+libffi.call/cls_align_longdouble_split2.c libffi.call/return_dbl2.c	\
+libffi.call/return_fl3.c libffi.call/stret_medium.c			\
+libffi.call/nested_struct6.c libffi.call/closure_fn3.c			\
+libffi.call/float3.c libffi.call/many2.c				\
+libffi.call/closure_stdcall.c libffi.call/cls_align_uint16.c		\
+libffi.call/cls_9byte1.c libffi.call/closure_fn6.c			\
+libffi.call/cls_double_va.c libffi.call/cls_align_pointer.c		\
+libffi.call/cls_align_longdouble.c libffi.call/closure_fn2.c		\
+libffi.call/cls_sshort.c libffi.call/many_win32.c			\
+libffi.call/nested_struct.c libffi.call/cls_20byte.c			\
+libffi.call/cls_longdouble.c libffi.call/cls_multi_uchar.c		\
+libffi.call/return_uc.c libffi.call/closure_thiscall.c			\
+libffi.call/cls_18byte.c libffi.call/cls_8byte.c			\
+libffi.call/promotion.c libffi.call/struct1_win32.c			\
+libffi.call/return_dbl.c libffi.call/cls_24byte.c			\
+libffi.call/struct4.c libffi.call/cls_6byte.c				\
+libffi.call/cls_align_uint32.c libffi.call/float.c			\
+libffi.call/float1.c libffi.call/float_va.c libffi.call/negint.c	\
+libffi.call/return_dbl1.c libffi.call/cls_3_1byte.c			\
+libffi.call/cls_align_float.c libffi.call/return_fl1.c			\
+libffi.call/nested_struct10.c libffi.call/nested_struct5.c		\
+libffi.call/fastthis1_win32.c libffi.call/cls_align_sint64.c		\
+libffi.call/stret_large2.c libffi.call/return_sl.c			\
+libffi.call/closure_fn0.c libffi.call/cls_5byte.c			\
+libffi.call/cls_2byte.c libffi.call/float2.c				\
+libffi.call/cls_dbls_struct.c libffi.call/cls_sint.c			\
+libffi.call/stret_large.c libffi.call/cls_ulonglong.c			\
+libffi.call/cls_ushort.c libffi.call/nested_struct1.c			\
+libffi.call/err_bad_abi.c libffi.call/cls_longdouble_va.c		\
+libffi.call/cls_float.c libffi.call/cls_pointer_stack.c		\
+libffi.call/pyobjc-tc.c libffi.call/cls_multi_ushortchar.c		\
+libffi.call/struct1.c libffi.call/nested_struct9.c			\
+libffi.call/huge_struct.c libffi.call/problem1.c			\
+libffi.call/float4.c libffi.call/fastthis3_win32.c			\
+libffi.call/return_ldl.c libffi.call/strlen2_win32.c			\
+libffi.call/closure_fn5.c libffi.call/struct2_win32.c			\
+libffi.call/struct6.c libffi.call/return_ll.c libffi.call/struct9.c	\
+libffi.call/return_sc.c libffi.call/struct7.c				\
+libffi.call/cls_align_uint64.c libffi.call/cls_4byte.c			\
+libffi.call/strlen_win32.c libffi.call/cls_6_1_byte.c			\
+libffi.call/cls_7_1_byte.c libffi.special/unwindtest.cc			\
+libffi.special/special.exp libffi.special/unwindtest_ffi_call.cc	\
+libffi.special/ffitestcxx.h lib/wrapper.exp lib/target-libpath.exp	\
+lib/libffi.exp libffi.call/cls_struct_va1.c				\
+libffi.call/cls_uchar_va.c libffi.call/cls_uint_va.c			\
+libffi.call/cls_ulong_va.c libffi.call/cls_ushort_va.c			\
+libffi.call/nested_struct11.c libffi.call/uninitialized.c		\
+libffi.call/va_1.c libffi.call/va_struct1.c libffi.call/va_struct2.c	\
+libffi.call/va_struct3.c
 
 all: all-am
 
@@ -296,9 +349,11 @@
 ctags: CTAGS
 CTAGS:
 
+cscope cscopelist:
+
 
 check-DEJAGNU: site.exp
-	srcdir=`$(am__cd) $(srcdir) && pwd`; export srcdir; \
+	srcdir='$(srcdir)'; export srcdir; \
 	EXPECT=$(EXPECT); export EXPECT; \
 	runtest=$(RUNTEST); \
 	if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
@@ -306,15 +361,15 @@
 	    if $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) $(RUNTESTFLAGS); \
 	    then :; else exit_status=1; fi; \
 	  done; \
-	else echo "WARNING: could not find \`runtest'" 1>&2; :;\
+	else echo "WARNING: could not find 'runtest'" 1>&2; :;\
 	fi; \
 	exit $$exit_status
-site.exp: Makefile
-	@echo 'Making a new site.exp file...'
+site.exp: Makefile $(EXTRA_DEJAGNU_SITE_CONFIG)
+	@echo 'Making a new site.exp file ...'
 	@echo '## these variables are automatically generated by make ##' >site.tmp
 	@echo '# Do not edit here.  If you wish to override these values' >>site.tmp
 	@echo '# edit the last section' >>site.tmp
-	@echo 'set srcdir $(srcdir)' >>site.tmp
+	@echo 'set srcdir "$(srcdir)"' >>site.tmp
 	@echo "set objdir `pwd`" >>site.tmp
 	@echo 'set build_alias "$(build_alias)"' >>site.tmp
 	@echo 'set build_triplet $(build_triplet)' >>site.tmp
@@ -322,9 +377,16 @@
 	@echo 'set host_triplet $(host_triplet)' >>site.tmp
 	@echo 'set target_alias "$(target_alias)"' >>site.tmp
 	@echo 'set target_triplet $(target_triplet)' >>site.tmp
-	@echo '## All variables above are generated by configure. Do Not Edit ##' >>site.tmp
-	@test ! -f site.exp || \
-	  sed '1,/^## All variables above are.*##/ d' site.exp >> site.tmp
+	@list='$(EXTRA_DEJAGNU_SITE_CONFIG)'; for f in $$list; do \
+	  echo "## Begin content included from file $$f.  Do not modify. ##" \
+	   && cat `test -f "$$f" || echo '$(srcdir)/'`$$f \
+	   && echo "## End content included from file $$f. ##" \
+	   || exit 1; \
+	 done >> site.tmp
+	@echo "## End of auto-generated content; you can edit from here. ##" >> site.tmp
+	@if test -f site.exp; then \
+	   sed -e '1,/^## End of auto-generated content.*##/d' site.exp >> site.tmp; \
+	 fi
 	@-rm -f site.bak
 	@test ! -f site.exp || mv site.exp site.bak
 	@mv site.tmp site.exp
@@ -380,10 +442,15 @@
 
 installcheck: installcheck-am
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
diff --git a/Modules/_ctypes/libffi/testsuite/lib/libffi-dg.exp b/Modules/_ctypes/libffi/testsuite/lib/libffi.exp
similarity index 80%
rename from Modules/_ctypes/libffi/testsuite/lib/libffi-dg.exp
rename to Modules/_ctypes/libffi/testsuite/lib/libffi.exp
index 838a306..1ac2c36 100644
--- a/Modules/_ctypes/libffi/testsuite/lib/libffi-dg.exp
+++ b/Modules/_ctypes/libffi/testsuite/lib/libffi.exp
@@ -1,4 +1,4 @@
-#   Copyright (C) 2003, 2005, 2008, 2009, 2010 Free Software Foundation, Inc.
+#   Copyright (C) 2003, 2005, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -11,8 +11,8 @@
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# along with this program; see the file COPYING3.  If not see
+# <http://www.gnu.org/licenses/>.
 
 proc load_gcc_lib { filename } {
     global srcdir
@@ -101,9 +101,17 @@
     global tool_root_dir
     global ld_library_path
 
-    set blddirffi [pwd]/..
+    global using_gcc
+
+    set blddirffi [pwd]/.. 
     verbose "libffi $blddirffi"
 
+    # Are we building with GCC?
+    set tmp [grep ../config.status "GCC='yes'"]
+    if { [string match $tmp "GCC='yes'"] } {
+
+      set using_gcc "yes"
+
     set gccdir [lookfor_file $tool_root_dir gcc/libgcc.a]
     if {$gccdir != ""} {
 	set gccdir [file dirname $gccdir]
@@ -127,6 +135,13 @@
 	    }
 	}
     }
+ 
+    } else {
+
+      set using_gcc "no"
+
+    }
+
     # add the library path for libffi.
     append ld_library_path ":${blddirffi}/.libs"
 
@@ -203,6 +218,10 @@
 
     lappend options "libs= -lffi"
 
+    if { [string match "aarch64*-*-linux*" $target_triplet] } {
+	lappend options "libs= -lpthread"
+    }
+
     verbose "options: $options"
     return [target_compile $source $dest $type $options]
 }
@@ -266,6 +285,56 @@
     }
 }
 
+proc check-flags { args } {
+
+    # The args are within another list; pull them out.
+    set args [lindex $args 0]
+
+    # The next two arguments are optional.  If they were not specified,
+    # use the defaults.
+    if { [llength $args] == 2 } {
+	lappend $args [list "*"]
+    }
+    if { [llength $args] == 3 } {
+	lappend $args [list ""]
+    }
+
+    # If the option strings are the defaults, or the same as the
+    # defaults, there is no need to call check_conditional_xfail to
+    # compare them to the actual options.
+    if { [string compare [lindex $args 2] "*"] == 0
+	 && [string compare [lindex $args 3] "" ] == 0 } {
+	set result 1    
+    } else {
+	# The target list might be an effective-target keyword, so replace
+	# the original list with "*-*-*", since we already know it matches.
+	set result [check_conditional_xfail [lreplace $args 1 1 "*-*-*"]]
+    }
+
+    return $result
+}
+
+proc dg-skip-if { args } {
+    # Verify the number of arguments.  The last two are optional.
+    set args [lreplace $args 0 0]
+    if { [llength $args] < 2 || [llength $args] > 4 } {
+        error "dg-skip-if 2: need 2, 3, or 4 arguments"
+    }
+
+    # Don't bother if we're already skipping the test.
+    upvar dg-do-what dg-do-what
+    if { [lindex ${dg-do-what} 1] == "N" } {
+      return
+    }
+
+    set selector [list target [lindex $args 1]]
+    if { [dg-process-target $selector] == "S" } {
+        if [check-flags $args] {
+            upvar dg-do-what dg-do-what
+            set dg-do-what [list [lindex ${dg-do-what} 0] "N" "P"]
+        }
+    }
+}
 
 # We need to make sure that additional_files and additional_sources
 # are both cleared out after every test.  It is not enough to clear
diff --git a/Modules/_ctypes/libffi/testsuite/lib/target-libpath.exp b/Modules/_ctypes/libffi/testsuite/lib/target-libpath.exp
index 8999aa4..6b7beba 100644
--- a/Modules/_ctypes/libffi/testsuite/lib/target-libpath.exp
+++ b/Modules/_ctypes/libffi/testsuite/lib/target-libpath.exp
@@ -25,7 +25,7 @@
 set orig_ld_library_path_32_saved 0
 set orig_ld_library_path_64_saved 0
 set orig_dyld_library_path_saved 0
-
+set orig_path_saved 0
 
 #######################################
 # proc set_ld_library_path_env_vars { }
@@ -42,6 +42,7 @@
   global orig_ld_library_path_32_saved
   global orig_ld_library_path_64_saved
   global orig_dyld_library_path_saved
+  global orig_path_saved
   global orig_ld_library_path
   global orig_ld_run_path
   global orig_shlib_path
@@ -50,6 +51,7 @@
   global orig_ld_library_path_32
   global orig_ld_library_path_64
   global orig_dyld_library_path
+  global orig_path
   global GCC_EXEC_PREFIX
 
   # Set the relocated compiler prefix, but only if the user hasn't specified one.
@@ -100,6 +102,10 @@
       set orig_dyld_library_path "$env(DYLD_LIBRARY_PATH)"
       set orig_dyld_library_path_saved 1
     }
+    if [info exists env(PATH)] {
+      set orig_path "$env(PATH)"
+      set orig_path_saved 1
+    }
   }
 
   # We need to set ld library path in the environment.  Currently,
@@ -169,6 +175,13 @@
   } else {
     setenv DYLD_LIBRARY_PATH "$ld_library_path"
   }
+  if { [istarget *-*-cygwin*] || [istarget *-*-mingw*] } {
+    if { $orig_path_saved } {
+      setenv PATH "$ld_library_path:$orig_path"
+    } else {
+      setenv PATH "$ld_library_path"
+    }
+  }
 
   verbose -log "set_ld_library_path_env_vars: ld_library_path=$ld_library_path"
 }
@@ -187,6 +200,7 @@
   global orig_ld_library_path_32_saved
   global orig_ld_library_path_64_saved
   global orig_dyld_library_path_saved
+  global orig_path_saved
   global orig_ld_library_path
   global orig_ld_run_path
   global orig_shlib_path
@@ -195,6 +209,7 @@
   global orig_ld_library_path_32
   global orig_ld_library_path_64
   global orig_dyld_library_path
+  global orig_path
 
   if { $orig_environment_saved == 0 } {
     return
@@ -240,6 +255,11 @@
   } elseif [info exists env(DYLD_LIBRARY_PATH)] {
     unsetenv DYLD_LIBRARY_PATH
   }
+  if { $orig_path_saved } {
+    setenv PATH "$orig_path"
+  } elseif [info exists env(PATH)] {
+    unsetenv PATH
+  }
 }
 
 #######################################
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/call.exp b/Modules/_ctypes/libffi/testsuite/libffi.call/call.exp
index 1e9985e..c334685 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/call.exp
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/call.exp
@@ -1,4 +1,4 @@
-# Copyright (C) 2003, 2006, 2009 Free Software Foundation, Inc.
+# Copyright (C) 2003, 2006, 2009, 2010 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -14,20 +14,25 @@
 # along with this program; see the file COPYING3.  If not see
 # <http://www.gnu.org/licenses/>.
 
-# libffi testsuite that uses the 'dg.exp' driver.
-
-load_lib libffi-dg.exp
-
 dg-init
 libffi-init
 
 global srcdir subdir
 
-dg-runtest [lsort [glob -nocomplain $srcdir/$subdir/*.\[cS\]]] "-O0 -W -Wall" ""
-dg-runtest [lsort [glob -nocomplain $srcdir/$subdir/*.\[cS\]]] "-O2" ""
-dg-runtest [lsort [glob -nocomplain $srcdir/$subdir/*.\[cS\]]] "-O3" ""
-dg-runtest [lsort [glob -nocomplain $srcdir/$subdir/*.\[cS\]]] "-Os" ""
-dg-runtest [lsort [glob -nocomplain $srcdir/$subdir/*.\[cS\]]] "-O2 -fomit-frame-pointer" ""
+if { [string match $using_gcc "yes"] } {
+
+  dg-runtest [lsort [glob -nocomplain $srcdir/$subdir/*.\[cS\]]] "-O0 -W -Wall" ""
+  dg-runtest [lsort [glob -nocomplain $srcdir/$subdir/*.\[cS\]]] "-O2" ""
+  dg-runtest [lsort [glob -nocomplain $srcdir/$subdir/*.\[cS\]]] "-O3" ""
+  dg-runtest [lsort [glob -nocomplain $srcdir/$subdir/*.\[cS\]]] "-Os" ""
+  dg-runtest [lsort [glob -nocomplain $srcdir/$subdir/*.\[cS\]]] "-O2 -fomit-frame-pointer" ""
+ 
+} else { 
+
+  # Assume we are using the vendor compiler.
+  dg-runtest [lsort [glob -nocomplain $srcdir/$subdir/*.\[cS\]]] "" ""
+
+}
 
 dg-finish
 
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/closure_stdcall.c b/Modules/_ctypes/libffi/testsuite/libffi.call/closure_stdcall.c
index 6bfcc1f..1407f02 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/closure_stdcall.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/closure_stdcall.c
@@ -49,9 +49,17 @@
   CHECK(ffi_prep_closure_loc(pcl, &cif, closure_test_stdcall,
                              (void *) 3 /* userdata */, code) == FFI_OK);
 
+#ifdef _MSC_VER
+  __asm { mov sp_pre, esp }
+#else
   asm volatile (" movl %%esp,%0" : "=g" (sp_pre));
+#endif
   res = (*(closure_test_type0)code)(0, 1, 2, 3);
+#ifdef _MSC_VER
+  __asm { mov sp_post, esp }
+#else
   asm volatile (" movl %%esp,%0" : "=g" (sp_post));
+#endif
   /* { dg-output "0 1 2 3: 9" } */
 
   printf("res: %d\n",res);
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/closure_thiscall.c b/Modules/_ctypes/libffi/testsuite/libffi.call/closure_thiscall.c
new file mode 100644
index 0000000..0f93649
--- /dev/null
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/closure_thiscall.c
@@ -0,0 +1,72 @@
+/* Area:	closure_call (thiscall convention)
+   Purpose:	Check handling when caller expects thiscall callee
+   Limitations:	none.
+   PR:		none.
+   Originator:	<ktietz@redhat.com> */
+
+/* { dg-do run { target i?86-*-cygwin* i?86-*-mingw* } } */
+#include "ffitest.h"
+
+static void
+closure_test_thiscall(ffi_cif* cif __UNUSED__, void* resp, void** args,
+		      void* userdata)
+{
+  *(ffi_arg*)resp =
+    (int)*(int *)args[0] + (int)(*(int *)args[1])
+    + (int)(*(int *)args[2])  + (int)(*(int *)args[3])
+    + (int)(intptr_t)userdata;
+
+  printf("%d %d %d %d: %d\n",
+	 (int)*(int *)args[0], (int)(*(int *)args[1]),
+	 (int)(*(int *)args[2]), (int)(*(int *)args[3]),
+         (int)*(ffi_arg *)resp);
+
+}
+
+typedef int (__thiscall *closure_test_type0)(int, int, int, int);
+
+int main (void)
+{
+  ffi_cif cif;
+  void *code;
+  ffi_closure *pcl = ffi_closure_alloc(sizeof(ffi_closure), &code);
+  ffi_type * cl_arg_types[17];
+  int res;
+  void* sp_pre;
+  void* sp_post;
+  char buf[1024];
+
+  cl_arg_types[0] = &ffi_type_uint;
+  cl_arg_types[1] = &ffi_type_uint;
+  cl_arg_types[2] = &ffi_type_uint;
+  cl_arg_types[3] = &ffi_type_uint;
+  cl_arg_types[4] = NULL;
+
+  /* Initialize the cif */
+  CHECK(ffi_prep_cif(&cif, FFI_THISCALL, 4,
+		     &ffi_type_sint, cl_arg_types) == FFI_OK);
+
+  CHECK(ffi_prep_closure_loc(pcl, &cif, closure_test_thiscall,
+                             (void *) 3 /* userdata */, code) == FFI_OK);
+
+#ifdef _MSC_VER
+  __asm { mov sp_pre, esp }
+#else
+  asm volatile (" movl %%esp,%0" : "=g" (sp_pre));
+#endif
+  res = (*(closure_test_type0)code)(0, 1, 2, 3);
+#ifdef _MSC_VER
+  __asm { mov sp_post, esp }
+#else
+  asm volatile (" movl %%esp,%0" : "=g" (sp_post));
+#endif
+  /* { dg-output "0 1 2 3: 9" } */
+
+  printf("res: %d\n",res);
+  /* { dg-output "\nres: 9" } */
+
+  sprintf(buf, "mismatch: pre=%p vs post=%p", sp_pre, sp_post);
+  printf("stack pointer %s\n", (sp_pre == sp_post ? "match" : buf));
+  /* { dg-output "\nstack pointer match" } */
+  exit(0);
+}
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_12byte.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_12byte.c
index f0a334f..ea0825d 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_12byte.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_12byte.c
@@ -49,15 +49,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_12byte h_dbl = { 7, 4, 9 };
+  struct cls_struct_12byte j_dbl = { 1, 5, 3 };
+  struct cls_struct_12byte res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_12byte h_dbl = { 7, 4, 9 };
-  struct cls_struct_12byte j_dbl = { 1, 5, 3 };
-  struct cls_struct_12byte res_dbl;
-
   cls_struct_fields[0] = &ffi_type_sint;
   cls_struct_fields[1] = &ffi_type_sint;
   cls_struct_fields[2] = &ffi_type_sint;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_16byte.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_16byte.c
index 9b9292a..89a08a2 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_16byte.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_16byte.c
@@ -50,15 +50,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_16byte h_dbl = { 7, 8.0, 9 };
+  struct cls_struct_16byte j_dbl = { 1, 9.0, 3 };
+  struct cls_struct_16byte res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_16byte h_dbl = { 7, 8.0, 9 };
-  struct cls_struct_16byte j_dbl = { 1, 9.0, 3 };
-  struct cls_struct_16byte res_dbl;
-
   cls_struct_fields[0] = &ffi_type_sint;
   cls_struct_fields[1] = &ffi_type_double;
   cls_struct_fields[2] = &ffi_type_sint;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_18byte.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_18byte.c
index 40c8c6d..9f75da8 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_18byte.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_18byte.c
@@ -54,15 +54,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[3];
 
+  struct cls_struct_18byte g_dbl = { 1.0, 127, 126, 3.0 };
+  struct cls_struct_18byte f_dbl = { 4.0, 125, 124, 5.0 };
+  struct cls_struct_18byte res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_18byte g_dbl = { 1.0, 127, 126, 3.0 };
-  struct cls_struct_18byte f_dbl = { 4.0, 125, 124, 5.0 };
-  struct cls_struct_18byte res_dbl;
-
   cls_struct_fields[0] = &ffi_type_double;
   cls_struct_fields[1] = &ffi_type_uchar;
   cls_struct_fields[2] = &ffi_type_uchar;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_19byte.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_19byte.c
index aa64248..278794b 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_19byte.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_19byte.c
@@ -57,15 +57,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[3];
 
+  struct cls_struct_19byte g_dbl = { 1.0, 127, 126, 3.0, 120 };
+  struct cls_struct_19byte f_dbl = { 4.0, 125, 124, 5.0, 119 };
+  struct cls_struct_19byte res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_19byte g_dbl = { 1.0, 127, 126, 3.0, 120 };
-  struct cls_struct_19byte f_dbl = { 4.0, 125, 124, 5.0, 119 };
-  struct cls_struct_19byte res_dbl;
-
   cls_struct_fields[0] = &ffi_type_double;
   cls_struct_fields[1] = &ffi_type_uchar;
   cls_struct_fields[2] = &ffi_type_uchar;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_1_1byte.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_1_1byte.c
index b9402d6..82492c0 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_1_1byte.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_1_1byte.c
@@ -50,15 +50,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_1_1byte g_dbl = { 12 };
+  struct cls_struct_1_1byte f_dbl = { 178 };
+  struct cls_struct_1_1byte res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_1_1byte g_dbl = { 12 };
-  struct cls_struct_1_1byte f_dbl = { 178 };
-  struct cls_struct_1_1byte res_dbl;
-
   cls_struct_fields[0] = &ffi_type_uchar;
   cls_struct_fields[1] = NULL;
 
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_20byte.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_20byte.c
index 80dd7ac..3f8bb28 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_20byte.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_20byte.c
@@ -50,15 +50,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_20byte g_dbl = { 1.0, 2.0, 3 };
+  struct cls_struct_20byte f_dbl = { 4.0, 5.0, 7 };
+  struct cls_struct_20byte res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_20byte g_dbl = { 1.0, 2.0, 3 };
-  struct cls_struct_20byte f_dbl = { 4.0, 5.0, 7 };
-  struct cls_struct_20byte res_dbl;
-
   cls_struct_fields[0] = &ffi_type_double;
   cls_struct_fields[1] = &ffi_type_double;
   cls_struct_fields[2] = &ffi_type_sint;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_20byte1.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_20byte1.c
index 50bcbbf..6562727 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_20byte1.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_20byte1.c
@@ -52,15 +52,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[3];
 
+  struct cls_struct_20byte g_dbl = { 1, 2.0, 3.0 };
+  struct cls_struct_20byte f_dbl = { 4, 5.0, 7.0 };
+  struct cls_struct_20byte res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_20byte g_dbl = { 1, 2.0, 3.0 };
-  struct cls_struct_20byte f_dbl = { 4, 5.0, 7.0 };
-  struct cls_struct_20byte res_dbl;
-
   cls_struct_fields[0] = &ffi_type_sint;
   cls_struct_fields[1] = &ffi_type_double;
   cls_struct_fields[2] = &ffi_type_double;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_24byte.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_24byte.c
index 46a6eb4..1d82f6e 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_24byte.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_24byte.c
@@ -61,17 +61,17 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
-  cls_struct_type.size = 0;
-  cls_struct_type.alignment = 0;
-  cls_struct_type.type = FFI_TYPE_STRUCT;
-  cls_struct_type.elements = cls_struct_fields;
-
   struct cls_struct_24byte e_dbl = { 9.0, 2.0, 6, 5.0 };
   struct cls_struct_24byte f_dbl = { 1.0, 2.0, 3, 7.0 };
   struct cls_struct_24byte g_dbl = { 4.0, 5.0, 7, 9.0 };
   struct cls_struct_24byte h_dbl = { 8.0, 6.0, 1, 4.0 };
   struct cls_struct_24byte res_dbl;
 
+  cls_struct_type.size = 0;
+  cls_struct_type.alignment = 0;
+  cls_struct_type.type = FFI_TYPE_STRUCT;
+  cls_struct_type.elements = cls_struct_fields;
+
   cls_struct_fields[0] = &ffi_type_double;
   cls_struct_fields[1] = &ffi_type_double;
   cls_struct_fields[2] = &ffi_type_sint;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_2byte.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_2byte.c
index 101e130..81bb0a6 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_2byte.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_2byte.c
@@ -50,15 +50,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_2byte g_dbl = { 12, 127 };
+  struct cls_struct_2byte f_dbl = { 1, 13 };
+  struct cls_struct_2byte res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_2byte g_dbl = { 12, 127 };
-  struct cls_struct_2byte f_dbl = { 1, 13 };
-  struct cls_struct_2byte res_dbl;
-
   cls_struct_fields[0] = &ffi_type_uchar;
   cls_struct_fields[1] = &ffi_type_uchar;
   cls_struct_fields[2] = NULL;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_3_1byte.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_3_1byte.c
index fc780c3..b782746 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_3_1byte.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_3_1byte.c
@@ -54,15 +54,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_3_1byte g_dbl = { 12, 13, 14 };
+  struct cls_struct_3_1byte f_dbl = { 178, 179, 180 };
+  struct cls_struct_3_1byte res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_3_1byte g_dbl = { 12, 13, 14 };
-  struct cls_struct_3_1byte f_dbl = { 178, 179, 180 };
-  struct cls_struct_3_1byte res_dbl;
-
   cls_struct_fields[0] = &ffi_type_uchar;
   cls_struct_fields[1] = &ffi_type_uchar;
   cls_struct_fields[2] = &ffi_type_uchar;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_3byte1.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_3byte1.c
index 5705ce3..a02c463 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_3byte1.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_3byte1.c
@@ -50,15 +50,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_3byte g_dbl = { 12, 119 };
+  struct cls_struct_3byte f_dbl = { 1, 15 };
+  struct cls_struct_3byte res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_3byte g_dbl = { 12, 119 };
-  struct cls_struct_3byte f_dbl = { 1, 15 };
-  struct cls_struct_3byte res_dbl;
-
   cls_struct_fields[0] = &ffi_type_ushort;
   cls_struct_fields[1] = &ffi_type_uchar;
   cls_struct_fields[2] = NULL;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_3byte2.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_3byte2.c
index 01770a0..c7251ce 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_3byte2.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_3byte2.c
@@ -50,15 +50,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_3byte_1 g_dbl = { 15, 125 };
+  struct cls_struct_3byte_1 f_dbl = { 9, 19 };
+  struct cls_struct_3byte_1 res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_3byte_1 g_dbl = { 15, 125 };
-  struct cls_struct_3byte_1 f_dbl = { 9, 19 };
-  struct cls_struct_3byte_1 res_dbl;
-
   cls_struct_fields[0] = &ffi_type_uchar;
   cls_struct_fields[1] = &ffi_type_ushort;
   cls_struct_fields[2] = NULL;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_4_1byte.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_4_1byte.c
index f3806d7..2d6d8b6 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_4_1byte.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_4_1byte.c
@@ -56,15 +56,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_4_1byte g_dbl = { 12, 13, 14, 15 };
+  struct cls_struct_4_1byte f_dbl = { 178, 179, 180, 181 };
+  struct cls_struct_4_1byte res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_4_1byte g_dbl = { 12, 13, 14, 15 };
-  struct cls_struct_4_1byte f_dbl = { 178, 179, 180, 181 };
-  struct cls_struct_4_1byte res_dbl;
-
   cls_struct_fields[0] = &ffi_type_uchar;
   cls_struct_fields[1] = &ffi_type_uchar;
   cls_struct_fields[2] = &ffi_type_uchar;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_4byte.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_4byte.c
index a1aba3c..4ac3787 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_4byte.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_4byte.c
@@ -50,15 +50,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_4byte g_dbl = { 127, 120 };
+  struct cls_struct_4byte f_dbl = { 12, 128 };
+  struct cls_struct_4byte res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_4byte g_dbl = { 127, 120 };
-  struct cls_struct_4byte f_dbl = { 12, 128 };
-  struct cls_struct_4byte res_dbl;
-
   cls_struct_fields[0] = &ffi_type_ushort;
   cls_struct_fields[1] = &ffi_type_ushort;
   cls_struct_fields[2] = NULL;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_5_1_byte.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_5_1_byte.c
index 2ceba3d..ad9d51c 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_5_1_byte.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_5_1_byte.c
@@ -58,15 +58,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_5byte g_dbl = { 127, 120, 1, 3, 4 };
+  struct cls_struct_5byte f_dbl = { 12, 128, 9, 3, 4 };
+  struct cls_struct_5byte res_dbl = { 0, 0, 0, 0, 0 };
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_5byte g_dbl = { 127, 120, 1, 3, 4 };
-  struct cls_struct_5byte f_dbl = { 12, 128, 9, 3, 4 };
-  struct cls_struct_5byte res_dbl = { 0, 0, 0, 0, 0 };
-
   cls_struct_fields[0] = &ffi_type_uchar;
   cls_struct_fields[1] = &ffi_type_uchar;
   cls_struct_fields[2] = &ffi_type_uchar;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_5byte.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_5byte.c
index 61d595c..4e0c000 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_5byte.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_5byte.c
@@ -53,15 +53,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_5byte g_dbl = { 127, 120, 1 };
+  struct cls_struct_5byte f_dbl = { 12, 128, 9 };
+  struct cls_struct_5byte res_dbl = { 0, 0, 0 };
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_5byte g_dbl = { 127, 120, 1 };
-  struct cls_struct_5byte f_dbl = { 12, 128, 9 };
-  struct cls_struct_5byte res_dbl = { 0, 0, 0 };
-
   cls_struct_fields[0] = &ffi_type_ushort;
   cls_struct_fields[1] = &ffi_type_ushort;
   cls_struct_fields[2] = &ffi_type_uchar;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_64byte.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_64byte.c
index 576ebe0..a55edc2 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_64byte.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_64byte.c
@@ -66,17 +66,17 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
-  cls_struct_type.size = 0;
-  cls_struct_type.alignment = 0;
-  cls_struct_type.type = FFI_TYPE_STRUCT;
-  cls_struct_type.elements = cls_struct_fields;
-
   struct cls_struct_64byte e_dbl = { 9.0, 2.0, 6.0, 5.0, 3.0, 4.0, 8.0, 1.0 };
   struct cls_struct_64byte f_dbl = { 1.0, 2.0, 3.0, 7.0, 2.0, 5.0, 6.0, 7.0 };
   struct cls_struct_64byte g_dbl = { 4.0, 5.0, 7.0, 9.0, 1.0, 1.0, 2.0, 9.0 };
   struct cls_struct_64byte h_dbl = { 8.0, 6.0, 1.0, 4.0, 0.0, 3.0, 3.0, 1.0 };
   struct cls_struct_64byte res_dbl;
 
+  cls_struct_type.size = 0;
+  cls_struct_type.alignment = 0;
+  cls_struct_type.type = FFI_TYPE_STRUCT;
+  cls_struct_type.elements = cls_struct_fields;
+
   cls_struct_fields[0] = &ffi_type_double;
   cls_struct_fields[1] = &ffi_type_double;
   cls_struct_fields[2] = &ffi_type_double;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_6_1_byte.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_6_1_byte.c
index 9f2eff6..b4dcdba 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_6_1_byte.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_6_1_byte.c
@@ -60,15 +60,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_6byte g_dbl = { 127, 120, 1, 3, 4, 5 };
+  struct cls_struct_6byte f_dbl = { 12, 128, 9, 3, 4, 5 };
+  struct cls_struct_6byte res_dbl = { 0, 0, 0, 0, 0, 0 };
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_6byte g_dbl = { 127, 120, 1, 3, 4, 5 };
-  struct cls_struct_6byte f_dbl = { 12, 128, 9, 3, 4, 5 };
-  struct cls_struct_6byte res_dbl = { 0, 0, 0, 0, 0, 0 };
-
   cls_struct_fields[0] = &ffi_type_uchar;
   cls_struct_fields[1] = &ffi_type_uchar;
   cls_struct_fields[2] = &ffi_type_uchar;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_6byte.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_6byte.c
index 73257b0..7406780 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_6byte.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_6byte.c
@@ -56,15 +56,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_6byte g_dbl = { 127, 120, 1, 128 };
+  struct cls_struct_6byte f_dbl = { 12, 128, 9, 127 };
+  struct cls_struct_6byte res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_6byte g_dbl = { 127, 120, 1, 128 };
-  struct cls_struct_6byte f_dbl = { 12, 128, 9, 127 };
-  struct cls_struct_6byte res_dbl;
-
   cls_struct_fields[0] = &ffi_type_ushort;
   cls_struct_fields[1] = &ffi_type_ushort;
   cls_struct_fields[2] = &ffi_type_uchar;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_7_1_byte.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_7_1_byte.c
index 50d09c9..14a7e96 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_7_1_byte.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_7_1_byte.c
@@ -62,15 +62,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_7byte g_dbl = { 127, 120, 1, 3, 4, 5, 6 };
+  struct cls_struct_7byte f_dbl = { 12, 128, 9, 3, 4, 5, 6 };
+  struct cls_struct_7byte res_dbl = { 0, 0, 0, 0, 0, 0, 0 };
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_7byte g_dbl = { 127, 120, 1, 3, 4, 5, 6 };
-  struct cls_struct_7byte f_dbl = { 12, 128, 9, 3, 4, 5, 6 };
-  struct cls_struct_7byte res_dbl = { 0, 0, 0, 0, 0, 0, 0 };
-
   cls_struct_fields[0] = &ffi_type_uchar;
   cls_struct_fields[1] = &ffi_type_uchar;
   cls_struct_fields[2] = &ffi_type_uchar;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_7byte.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_7byte.c
index f5c0000..1645cc6 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_7byte.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_7byte.c
@@ -55,15 +55,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_7byte g_dbl = { 127, 120, 1, 254 };
+  struct cls_struct_7byte f_dbl = { 12, 128, 9, 255 };
+  struct cls_struct_7byte res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_7byte g_dbl = { 127, 120, 1, 254 };
-  struct cls_struct_7byte f_dbl = { 12, 128, 9, 255 };
-  struct cls_struct_7byte res_dbl;
-
   cls_struct_fields[0] = &ffi_type_ushort;
   cls_struct_fields[1] = &ffi_type_ushort;
   cls_struct_fields[2] = &ffi_type_uchar;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_8byte.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_8byte.c
index 4aa99d1..f6c1ea5 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_8byte.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_8byte.c
@@ -49,15 +49,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_8byte g_dbl = { 1, 2.0 };
+  struct cls_struct_8byte f_dbl = { 4, 5.0 };
+  struct cls_struct_8byte res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_8byte g_dbl = { 1, 2.0 };
-  struct cls_struct_8byte f_dbl = { 4, 5.0 };
-  struct cls_struct_8byte res_dbl;
-
   cls_struct_fields[0] = &ffi_type_sint;
   cls_struct_fields[1] = &ffi_type_float;
   cls_struct_fields[2] = NULL;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_9byte1.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_9byte1.c
index cc5e9d6..0b85722 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_9byte1.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_9byte1.c
@@ -50,15 +50,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[3];
 
+  struct cls_struct_9byte h_dbl = { 7, 8.0};
+  struct cls_struct_9byte j_dbl = { 1, 9.0};
+  struct cls_struct_9byte res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_9byte h_dbl = { 7, 8.0};
-  struct cls_struct_9byte j_dbl = { 1, 9.0};
-  struct cls_struct_9byte res_dbl;
-
   cls_struct_fields[0] = &ffi_type_sint;
   cls_struct_fields[1] = &ffi_type_double;
   cls_struct_fields[2] = NULL;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_9byte2.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_9byte2.c
index 5c0ba0d..edf991d 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_9byte2.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_9byte2.c
@@ -50,15 +50,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[3];
 
+  struct cls_struct_9byte h_dbl = { 7.0, 8};
+  struct cls_struct_9byte j_dbl = { 1.0, 9};
+  struct cls_struct_9byte res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_9byte h_dbl = { 7.0, 8};
-  struct cls_struct_9byte j_dbl = { 1.0, 9};
-  struct cls_struct_9byte res_dbl;
-
   cls_struct_fields[0] = &ffi_type_double;
   cls_struct_fields[1] = &ffi_type_sint;
   cls_struct_fields[2] = NULL;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_double.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_double.c
index 22b94d5..aad5f3c 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_double.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_double.c
@@ -52,15 +52,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_align g_dbl = { 12, 4951, 127 };
+  struct cls_struct_align f_dbl = { 1, 9320, 13 };
+  struct cls_struct_align res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_align g_dbl = { 12, 4951, 127 };
-  struct cls_struct_align f_dbl = { 1, 9320, 13 };
-  struct cls_struct_align res_dbl;
-
   cls_struct_fields[0] = &ffi_type_uchar;
   cls_struct_fields[1] = &ffi_type_double;
   cls_struct_fields[2] = &ffi_type_uchar;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_float.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_float.c
index 62637f2..37e0855 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_float.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_float.c
@@ -50,15 +50,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_align g_dbl = { 12, 4951, 127 };
+  struct cls_struct_align f_dbl = { 1, 9320, 13 };
+  struct cls_struct_align res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_align g_dbl = { 12, 4951, 127 };
-  struct cls_struct_align f_dbl = { 1, 9320, 13 };
-  struct cls_struct_align res_dbl;
-
   cls_struct_fields[0] = &ffi_type_uchar;
   cls_struct_fields[1] = &ffi_type_float;
   cls_struct_fields[2] = &ffi_type_uchar;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_longdouble.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_longdouble.c
index af38060..b3322d8 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_longdouble.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_longdouble.c
@@ -51,15 +51,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_align g_dbl = { 12, 4951, 127 };
+  struct cls_struct_align f_dbl = { 1, 9320, 13 };
+  struct cls_struct_align res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_align g_dbl = { 12, 4951, 127 };
-  struct cls_struct_align f_dbl = { 1, 9320, 13 };
-  struct cls_struct_align res_dbl;
-
   cls_struct_fields[0] = &ffi_type_uchar;
   cls_struct_fields[1] = &ffi_type_longdouble;
   cls_struct_fields[2] = &ffi_type_uchar;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_longdouble_split.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_longdouble_split.c
index 4274af1..15f9365 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_longdouble_split.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_longdouble_split.c
@@ -6,7 +6,7 @@
 
 /* { dg-excess-errors "no long double format" { xfail x86_64-*-mingw* x86_64-*-cygwin* } } */
 /* { dg-do run { xfail strongarm*-*-* xscale*-*-* } } */
-/* { dg-options -mlong-double-128 { target powerpc64*-*-* } } */
+/* { dg-options -mlong-double-128 { target powerpc64*-*-linux* } } */
 /* { dg-output "" { xfail x86_64-*-mingw* x86_64-*-cygwin* } } */
 
 #include "ffitest.h"
@@ -87,15 +87,15 @@
 	ffi_type cls_struct_type;
 	ffi_type* dbl_arg_types[3];
 
+	struct cls_struct_align g_dbl = { 1, 2, 3, 4, 5, 6, 7 };
+	struct cls_struct_align f_dbl = { 8, 9, 10, 11, 12, 13, 14 };
+	struct cls_struct_align res_dbl;
+
 	cls_struct_type.size = 0;
 	cls_struct_type.alignment = 0;
 	cls_struct_type.type = FFI_TYPE_STRUCT;
 	cls_struct_type.elements = cls_struct_fields;
 
-	struct cls_struct_align g_dbl = { 1, 2, 3, 4, 5, 6, 7 };
-	struct cls_struct_align f_dbl = { 8, 9, 10, 11, 12, 13, 14 };
-	struct cls_struct_align res_dbl;
-
 	cls_struct_fields[0] = &ffi_type_longdouble;
 	cls_struct_fields[1] = &ffi_type_longdouble;
 	cls_struct_fields[2] = &ffi_type_longdouble;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_longdouble_split2.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_longdouble_split2.c
index 088f0d3..ca1c356 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_longdouble_split2.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_longdouble_split2.c
@@ -7,7 +7,7 @@
 
 /* { dg-excess-errors "no long double format" { xfail x86_64-*-mingw* x86_64-*-cygwin* } } */
 /* { dg-do run { xfail strongarm*-*-* } } */
-/* { dg-options -mlong-double-128 { target powerpc64*-*-* } } */
+/* { dg-options -mlong-double-128 { target powerpc64*-*-linux* } } */
 /* { dg-output "" { xfail x86_64-*-mingw* x86_64-*-cygwin* } } */
 
 #include "ffitest.h"
@@ -67,15 +67,15 @@
 	ffi_type cls_struct_type;
 	ffi_type* dbl_arg_types[3];
 
+	struct cls_struct_align g_dbl = { 1, 2, 3, 4, 5, 6, 7 };
+	struct cls_struct_align f_dbl = { 8, 9, 10, 11, 12, 13, 14 };
+	struct cls_struct_align res_dbl;
+
 	cls_struct_type.size = 0;
 	cls_struct_type.alignment = 0;
 	cls_struct_type.type = FFI_TYPE_STRUCT;
 	cls_struct_type.elements = cls_struct_fields;
 
-	struct cls_struct_align g_dbl = { 1, 2, 3, 4, 5, 6, 7 };
-	struct cls_struct_align f_dbl = { 8, 9, 10, 11, 12, 13, 14 };
-	struct cls_struct_align res_dbl;
-
 	cls_struct_fields[0] = &ffi_type_longdouble;
 	cls_struct_fields[1] = &ffi_type_longdouble;
 	cls_struct_fields[2] = &ffi_type_longdouble;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_pointer.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_pointer.c
index cbc4f95..8fbf36a 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_pointer.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_pointer.c
@@ -54,15 +54,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_align g_dbl = { 12, (void *)4951, 127 };
+  struct cls_struct_align f_dbl = { 1, (void *)9320, 13 };
+  struct cls_struct_align res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_align g_dbl = { 12, (void *)4951, 127 };
-  struct cls_struct_align f_dbl = { 1, (void *)9320, 13 };
-  struct cls_struct_align res_dbl;
-
   cls_struct_fields[0] = &ffi_type_uchar;
   cls_struct_fields[1] = &ffi_type_pointer;
   cls_struct_fields[2] = &ffi_type_uchar;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_sint16.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_sint16.c
index 383ea41..039b874 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_sint16.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_sint16.c
@@ -50,15 +50,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_align g_dbl = { 12, 4951, 127 };
+  struct cls_struct_align f_dbl = { 1, 9320, 13 };
+  struct cls_struct_align res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_align g_dbl = { 12, 4951, 127 };
-  struct cls_struct_align f_dbl = { 1, 9320, 13 };
-  struct cls_struct_align res_dbl;
-
   cls_struct_fields[0] = &ffi_type_uchar;
   cls_struct_fields[1] = &ffi_type_sshort;
   cls_struct_fields[2] = &ffi_type_uchar;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_sint32.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_sint32.c
index 705d78c..c96c6d1 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_sint32.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_sint32.c
@@ -50,15 +50,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_align g_dbl = { 12, 4951, 127 };
+  struct cls_struct_align f_dbl = { 1, 9320, 13 };
+  struct cls_struct_align res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_align g_dbl = { 12, 4951, 127 };
-  struct cls_struct_align f_dbl = { 1, 9320, 13 };
-  struct cls_struct_align res_dbl;
-
   cls_struct_fields[0] = &ffi_type_uchar;
   cls_struct_fields[1] = &ffi_type_sint;
   cls_struct_fields[2] = &ffi_type_uchar;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_sint64.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_sint64.c
index 31d53af..9aa7bdd 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_sint64.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_sint64.c
@@ -51,15 +51,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_align g_dbl = { 12, 4951, 127 };
+  struct cls_struct_align f_dbl = { 1, 9320, 13 };
+  struct cls_struct_align res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_align g_dbl = { 12, 4951, 127 };
-  struct cls_struct_align f_dbl = { 1, 9320, 13 };
-  struct cls_struct_align res_dbl;
-
   cls_struct_fields[0] = &ffi_type_uchar;
   cls_struct_fields[1] = &ffi_type_sint64;
   cls_struct_fields[2] = &ffi_type_uchar;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_uint16.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_uint16.c
index cb6b748..97620b7 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_uint16.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_uint16.c
@@ -50,15 +50,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_align g_dbl = { 12, 4951, 127 };
+  struct cls_struct_align f_dbl = { 1, 9320, 13 };
+  struct cls_struct_align res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_align g_dbl = { 12, 4951, 127 };
-  struct cls_struct_align f_dbl = { 1, 9320, 13 };
-  struct cls_struct_align res_dbl;
-
   cls_struct_fields[0] = &ffi_type_uchar;
   cls_struct_fields[1] = &ffi_type_ushort;
   cls_struct_fields[2] = &ffi_type_uchar;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_uint32.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_uint32.c
index e453d3e..5766fad 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_uint32.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_uint32.c
@@ -50,15 +50,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_align g_dbl = { 12, 4951, 127 };
+  struct cls_struct_align f_dbl = { 1, 9320, 13 };
+  struct cls_struct_align res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_align g_dbl = { 12, 4951, 127 };
-  struct cls_struct_align f_dbl = { 1, 9320, 13 };
-  struct cls_struct_align res_dbl;
-
   cls_struct_fields[0] = &ffi_type_uchar;
   cls_struct_fields[1] = &ffi_type_uint;
   cls_struct_fields[2] = &ffi_type_uchar;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_uint64.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_uint64.c
index 495c79f..a52cb89 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_uint64.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_align_uint64.c
@@ -52,15 +52,15 @@
   ffi_type cls_struct_type;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_align g_dbl = { 12, 4951, 127 };
+  struct cls_struct_align f_dbl = { 1, 9320, 13 };
+  struct cls_struct_align res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
   cls_struct_type.elements = cls_struct_fields;
 
-  struct cls_struct_align g_dbl = { 12, 4951, 127 };
-  struct cls_struct_align f_dbl = { 1, 9320, 13 };
-  struct cls_struct_align res_dbl;
-
   cls_struct_fields[0] = &ffi_type_uchar;
   cls_struct_fields[1] = &ffi_type_uint64;
   cls_struct_fields[2] = &ffi_type_uchar;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_dbls_struct.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_dbls_struct.c
index 660dabb..d663791 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_dbls_struct.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_dbls_struct.c
@@ -37,6 +37,8 @@
 	ffi_type	ts1_type;
 	ffi_type*	ts1_type_elements[4];
 
+	Dbls arg = { 1.0, 2.0 };
+
 	ts1_type.size = 0;
 	ts1_type.alignment = 0;
 	ts1_type.type = FFI_TYPE_STRUCT;
@@ -48,8 +50,6 @@
 
 	cl_arg_types[0] = &ts1_type;
 
-	Dbls arg = { 1.0, 2.0 };
-
 	/* Initialize the cif */
 	CHECK(ffi_prep_cif(&cif, FFI_DEFAULT_ABI, 1,
 				 &ffi_type_void, cl_arg_types) == FFI_OK);
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_double_va.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_double_va.c
index 0695874..43167b6 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_double_va.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_double_va.c
@@ -6,6 +6,8 @@
 
 /* { dg-do run { xfail strongarm*-*-* xscale*-*-* } } */
 /* { dg-output "" { xfail avr32*-*-* } } */
+/* { dg-output "" { xfail mips-sgi-irix6* } } PR libffi/46660 */
+
 #include "ffitest.h"
 
 static void
@@ -34,7 +36,8 @@
 	arg_types[1] = &ffi_type_double;
 	arg_types[2] = NULL;
 
-	CHECK(ffi_prep_cif(&cif, FFI_DEFAULT_ABI, 2, &ffi_type_sint,
+	/* This printf call is variadic */
+	CHECK(ffi_prep_cif_var(&cif, FFI_DEFAULT_ABI, 1, 2, &ffi_type_sint,
 		arg_types) == FFI_OK);
 
 	args[0] = &format;
@@ -42,16 +45,19 @@
 	args[2] = NULL;
 
 	ffi_call(&cif, FFI_FN(printf), &res, args);
-	// { dg-output "7.0" }
+	/* { dg-output "7.0" } */
 	printf("res: %d\n", (int) res);
-	// { dg-output "\nres: 4" }
+	/* { dg-output "\nres: 4" } */
+
+	/* The call to cls_double_va_fn is static, so have to use a normal prep_cif */
+	CHECK(ffi_prep_cif(&cif, FFI_DEFAULT_ABI, 2, &ffi_type_sint, arg_types) == FFI_OK);
 
 	CHECK(ffi_prep_closure_loc(pcl, &cif, cls_double_va_fn, NULL, code) == FFI_OK);
 
 	res	= ((int(*)(char*, double))(code))(format, doubleArg);
-	// { dg-output "\n7.0" }
+	/* { dg-output "\n7.0" } */
 	printf("res: %d\n", (int) res);
-	// { dg-output "\nres: 4" }
+	/* { dg-output "\nres: 4" } */
 
 	exit(0);
 }
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_longdouble.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_longdouble.c
index 52af6cf..5dc9ac7 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_longdouble.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_longdouble.c
@@ -5,8 +5,10 @@
    Originator:	Blake Chaffin	*/
 
 /* { dg-excess-errors "no long double format" { xfail x86_64-*-mingw* x86_64-*-cygwin* } } */
-/* { dg-do run { xfail arm*-*-* strongarm*-*-* xscale*-*-* } } */
-/* { dg-options -mlong-double-128 { target powerpc64*-*-* } } */
+/* This test is known to PASS on armv7l-unknown-linux-gnueabihf, so I have
+   remove the xfail for arm*-*-* below, until we know more.  */
+/* { dg-do run { xfail strongarm*-*-* xscale*-*-* } } */
+/* { dg-options -mlong-double-128 { target powerpc64*-*-linux* } } */
 /* { dg-output "" { xfail x86_64-*-mingw* x86_64-*-cygwin* } } */
 
 #include "ffitest.h"
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_longdouble_va.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_longdouble_va.c
index 38564cb..7126b13 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_longdouble_va.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_longdouble_va.c
@@ -6,6 +6,8 @@
 
 /* { dg-do run { xfail strongarm*-*-* xscale*-*-* } } */
 /* { dg-output "" { xfail avr32*-*-* x86_64-*-mingw* } } */
+/* { dg-output "" { xfail mips-sgi-irix6* } } PR libffi/46660 */
+
 #include "ffitest.h"
 
 static void
@@ -34,7 +36,8 @@
 	arg_types[1] = &ffi_type_longdouble;
 	arg_types[2] = NULL;
 
-	CHECK(ffi_prep_cif(&cif, FFI_DEFAULT_ABI, 2, &ffi_type_sint,
+	/* This printf call is variadic */
+	CHECK(ffi_prep_cif_var(&cif, FFI_DEFAULT_ABI, 1, 2, &ffi_type_sint,
 		arg_types) == FFI_OK);
 
 	args[0] = &format;
@@ -42,16 +45,20 @@
 	args[2] = NULL;
 
 	ffi_call(&cif, FFI_FN(printf), &res, args);
-	// { dg-output "7.0" }
+	/* { dg-output "7.0" } */
 	printf("res: %d\n", (int) res);
-	// { dg-output "\nres: 4" }
+	/* { dg-output "\nres: 4" } */
+
+	/* The call to cls_longdouble_va_fn is static, so have to use a normal prep_cif */
+	CHECK(ffi_prep_cif(&cif, FFI_DEFAULT_ABI, 2, &ffi_type_sint,
+		arg_types) == FFI_OK);
 
 	CHECK(ffi_prep_closure_loc(pcl, &cif, cls_longdouble_va_fn, NULL, code) == FFI_OK);
 
 	res	= ((int(*)(char*, long double))(code))(format, ldArg);
-	// { dg-output "\n7.0" }
+	/* { dg-output "\n7.0" } */
 	printf("res: %d\n", (int) res);
-	// { dg-output "\nres: 4" }
+	/* { dg-output "\nres: 4" } */
 
 	exit(0);
 }
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_pointer.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_pointer.c
index fadd353..d82a87a 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_pointer.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_pointer.c
@@ -35,7 +35,7 @@
         void *code;
 	ffi_closure*	pcl = ffi_closure_alloc(sizeof(ffi_closure), &code);
 	void*			args[3];
-//	ffi_type		cls_pointer_type;
+	/*	ffi_type		cls_pointer_type; */
 	ffi_type*		arg_types[3];
 
 /*	cls_pointer_type.size = sizeof(void*);
@@ -65,7 +65,7 @@
 
 	CHECK(ffi_prep_closure_loc(pcl, &cif, cls_pointer_gn, NULL, code) == FFI_OK);
 
-	res = (ffi_arg)((void*(*)(void*, void*))(code))(arg1, arg2);
+	res = (ffi_arg)(uintptr_t)((void*(*)(void*, void*))(code))(arg1, arg2);
 	/* { dg-output "\n0x12345678 0x89abcdef: 0x9be02467" } */
 	printf("res: 0x%08x\n", (unsigned int) res);
 	/* { dg-output "\nres: 0x9be02467" } */
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_pointer_stack.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_pointer_stack.c
index 697f271..1f1d915 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_pointer_stack.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_pointer_stack.c
@@ -28,11 +28,12 @@
 	char		trample6	= trample4 + ((char*)&a2)[1];
 	long double	trample7	= (intptr_t)trample5 + (intptr_t)trample1;
 	char		trample8	= trample6 + trample2;
+	void*		result;
 
 	dummyVar	= dummy_func(trample1, trample2, trample3, trample4,
 		trample5, trample6, trample7, trample8);
 
-	void*	result	= (void*)((intptr_t)a1 + (intptr_t)a2);
+	result	= (void*)((intptr_t)a1 + (intptr_t)a2);
 
 	printf("0x%08x 0x%08x: 0x%08x\n", 
 	       (unsigned int)(uintptr_t) a1,
@@ -52,11 +53,12 @@
 	char		trample6	= trample4 + ((char*)&a2)[1];
 	long double	trample7	= (intptr_t)trample5 + (intptr_t)trample1;
 	char		trample8	= trample6 + trample2;
+	void*		result;
 
 	dummyVar	= dummy_func(trample1, trample2, trample3, trample4,
 		trample5, trample6, trample7, trample8);
 
-	void*	result	= (void*)((intptr_t)a1 + (intptr_t)a2);
+	result	= (void*)((intptr_t)a1 + (intptr_t)a2);
 
 	printf("0x%08x 0x%08x: 0x%08x\n",
                (unsigned int)(intptr_t) a1,
@@ -96,7 +98,7 @@
         void *code;
 	ffi_closure*	pcl = ffi_closure_alloc(sizeof(ffi_closure), &code);
 	void*			args[3];
-//	ffi_type		cls_pointer_type;
+	/*	ffi_type		cls_pointer_type; */
 	ffi_type*		arg_types[3];
 
 /*	cls_pointer_type.size = sizeof(void*);
@@ -123,18 +125,18 @@
 	ffi_call(&cif, FFI_FN(cls_pointer_fn1), &res, args);
 
 	printf("res: 0x%08x\n", (unsigned int) res);
-	// { dg-output "\n0x01234567 0x89abcdef: 0x8acf1356" }
-	// { dg-output "\n0x8acf1356 0x01234567: 0x8bf258bd" }
-	// { dg-output "\nres: 0x8bf258bd" }
+	/* { dg-output "\n0x01234567 0x89abcdef: 0x8acf1356" } */
+	/* { dg-output "\n0x8acf1356 0x01234567: 0x8bf258bd" } */
+	/* { dg-output "\nres: 0x8bf258bd" } */
 
 	CHECK(ffi_prep_closure_loc(pcl, &cif, cls_pointer_gn, NULL, code) == FFI_OK);
 
-	res = (ffi_arg)((void*(*)(void*, void*))(code))(arg1, arg2);
+	res = (ffi_arg)(uintptr_t)((void*(*)(void*, void*))(code))(arg1, arg2);
 
 	printf("res: 0x%08x\n", (unsigned int) res);
-	// { dg-output "\n0x01234567 0x89abcdef: 0x8acf1356" }
-	// { dg-output "\n0x8acf1356 0x01234567: 0x8bf258bd" }
-	// { dg-output "\nres: 0x8bf258bd" }
+	/* { dg-output "\n0x01234567 0x89abcdef: 0x8acf1356" } */
+	/* { dg-output "\n0x8acf1356 0x01234567: 0x8bf258bd" } */
+	/* { dg-output "\nres: 0x8bf258bd" } */
 
 	exit(0);
 }
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_struct_va1.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_struct_va1.c
new file mode 100644
index 0000000..175ed96
--- /dev/null
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_struct_va1.c
@@ -0,0 +1,114 @@
+/* Area:		ffi_call, closure_call
+   Purpose:		Test doubles passed in variable argument lists.
+   Limitations:	none.
+   PR:			none.
+   Originator:	Blake Chaffin 6/6/2007	 */
+
+/* { dg-do run } */
+/* { dg-output "" { xfail avr32*-*-* } } */
+#include "ffitest.h"
+
+struct small_tag
+{
+  unsigned char a;
+  unsigned char b;
+};
+
+struct large_tag
+{
+  unsigned a;
+  unsigned b;
+  unsigned c;
+  unsigned d;
+  unsigned e;
+};
+
+static void
+test_fn (ffi_cif* cif __UNUSED__, void* resp,
+	 void** args, void* userdata __UNUSED__)
+{
+  int n = *(int*)args[0];
+  struct small_tag s1 = * (struct small_tag *) args[1];
+  struct large_tag l1 = * (struct large_tag *) args[2];
+  struct small_tag s2 = * (struct small_tag *) args[3];
+
+  printf ("%d %d %d %d %d %d %d %d %d %d\n", n, s1.a, s1.b,
+	  l1.a, l1.b, l1.c, l1.d, l1.e,
+	  s2.a, s2.b);
+  * (int*) resp = 42;
+}
+
+int
+main (void)
+{
+  ffi_cif cif;
+  void *code;
+  ffi_closure *pcl = ffi_closure_alloc (sizeof (ffi_closure), &code);
+  ffi_type* arg_types[5];
+
+  ffi_arg res = 0;
+
+  ffi_type s_type;
+  ffi_type *s_type_elements[3];
+
+  ffi_type l_type;
+  ffi_type *l_type_elements[6];
+
+  struct small_tag s1;
+  struct small_tag s2;
+  struct large_tag l1;
+
+  int si;
+
+  s_type.size = 0;
+  s_type.alignment = 0;
+  s_type.type = FFI_TYPE_STRUCT;
+  s_type.elements = s_type_elements;
+
+  s_type_elements[0] = &ffi_type_uchar;
+  s_type_elements[1] = &ffi_type_uchar;
+  s_type_elements[2] = NULL;
+
+  l_type.size = 0;
+  l_type.alignment = 0;
+  l_type.type = FFI_TYPE_STRUCT;
+  l_type.elements = l_type_elements;
+
+  l_type_elements[0] = &ffi_type_uint;
+  l_type_elements[1] = &ffi_type_uint;
+  l_type_elements[2] = &ffi_type_uint;
+  l_type_elements[3] = &ffi_type_uint;
+  l_type_elements[4] = &ffi_type_uint;
+  l_type_elements[5] = NULL;
+
+  arg_types[0] = &ffi_type_sint;
+  arg_types[1] = &s_type;
+  arg_types[2] = &l_type;
+  arg_types[3] = &s_type;
+  arg_types[4] = NULL;
+
+  CHECK(ffi_prep_cif_var(&cif, FFI_DEFAULT_ABI, 1, 4, &ffi_type_sint,
+			 arg_types) == FFI_OK);
+
+  si = 4;
+  s1.a = 5;
+  s1.b = 6;
+
+  s2.a = 20;
+  s2.b = 21;
+
+  l1.a = 10;
+  l1.b = 11;
+  l1.c = 12;
+  l1.d = 13;
+  l1.e = 14;
+
+  CHECK(ffi_prep_closure_loc(pcl, &cif, test_fn, NULL, code) == FFI_OK);
+
+  res = ((int (*)(int, ...))(code))(si, s1, l1, s2);
+  /* { dg-output "4 5 6 10 11 12 13 14 20 21" } */
+  printf("res: %d\n", (int) res);
+  /* { dg-output "\nres: 42" } */
+
+  exit(0);
+}
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_uchar_va.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_uchar_va.c
new file mode 100644
index 0000000..6491c5b
--- /dev/null
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_uchar_va.c
@@ -0,0 +1,44 @@
+/* Area:	closure_call
+   Purpose:	Test anonymous unsigned char argument.
+   Limitations:	none.
+   PR:		none.
+   Originator:	ARM Ltd. */
+
+/* { dg-do run } */
+#include "ffitest.h"
+
+typedef unsigned char T;
+
+static void cls_ret_T_fn(ffi_cif* cif __UNUSED__, void* resp, void** args,
+			 void* userdata __UNUSED__)
+ {
+   *(ffi_arg *)resp = *(T *)args[0];
+
+   printf("%d: %d %d\n", (int)(*(ffi_arg *)resp), *(T *)args[0], *(T *)args[1]);
+ }
+
+typedef T (*cls_ret_T)(T, ...);
+
+int main (void)
+{
+  ffi_cif cif;
+  void *code;
+  ffi_closure *pcl = ffi_closure_alloc(sizeof(ffi_closure), &code);
+  ffi_type * cl_arg_types[3];
+  T res;
+
+  cl_arg_types[0] = &ffi_type_uchar;
+  cl_arg_types[1] = &ffi_type_uchar;
+  cl_arg_types[2] = NULL;
+
+  /* Initialize the cif */
+  CHECK(ffi_prep_cif_var(&cif, FFI_DEFAULT_ABI, 1, 2,
+			 &ffi_type_uchar, cl_arg_types) == FFI_OK);
+
+  CHECK(ffi_prep_closure_loc(pcl, &cif, cls_ret_T_fn, NULL, code)  == FFI_OK);
+  res = ((((cls_ret_T)code)(67, 4)));
+  /* { dg-output "67: 67 4" } */
+  printf("res: %d\n", res);
+  /* { dg-output "\nres: 67" } */
+  exit(0);
+}
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_uint_va.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_uint_va.c
new file mode 100644
index 0000000..150fddd
--- /dev/null
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_uint_va.c
@@ -0,0 +1,45 @@
+/* Area:	closure_call
+   Purpose:	Test anonymous unsigned int argument.
+   Limitations:	none.
+   PR:		none.
+   Originator:	ARM Ltd. */
+
+/* { dg-do run } */
+
+#include "ffitest.h"
+
+typedef unsigned int T;
+
+static void cls_ret_T_fn(ffi_cif* cif __UNUSED__, void* resp, void** args,
+			 void* userdata __UNUSED__)
+ {
+   *(T *)resp = *(T *)args[0];
+
+   printf("%d: %d %d\n", *(T *)resp, *(T *)args[0], *(T *)args[1]);
+ }
+
+typedef T (*cls_ret_T)(T, ...);
+
+int main (void)
+{
+  ffi_cif cif;
+  void *code;
+  ffi_closure *pcl = ffi_closure_alloc(sizeof(ffi_closure), &code);
+  ffi_type * cl_arg_types[3];
+  T res;
+
+  cl_arg_types[0] = &ffi_type_uint;
+  cl_arg_types[1] = &ffi_type_uint;
+  cl_arg_types[2] = NULL;
+
+  /* Initialize the cif */
+  CHECK(ffi_prep_cif_var(&cif, FFI_DEFAULT_ABI, 1, 2,
+			 &ffi_type_uint, cl_arg_types) == FFI_OK);
+
+  CHECK(ffi_prep_closure_loc(pcl, &cif, cls_ret_T_fn, NULL, code)  == FFI_OK);
+  res = ((((cls_ret_T)code)(67, 4)));
+  /* { dg-output "67: 67 4" } */
+  printf("res: %d\n", res);
+  /* { dg-output "\nres: 67" } */
+  exit(0);
+}
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_ulong_va.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_ulong_va.c
new file mode 100644
index 0000000..0315082
--- /dev/null
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_ulong_va.c
@@ -0,0 +1,45 @@
+/* Area:	closure_call
+   Purpose:	Test anonymous unsigned long argument.
+   Limitations:	none.
+   PR:		none.
+   Originator:	ARM Ltd. */
+
+/* { dg-do run } */
+
+#include "ffitest.h"
+
+typedef unsigned long T;
+
+static void cls_ret_T_fn(ffi_cif* cif __UNUSED__, void* resp, void** args,
+			 void* userdata __UNUSED__)
+ {
+   *(T *)resp = *(T *)args[0];
+
+   printf("%ld: %ld %ld\n", *(T *)resp, *(T *)args[0], *(T *)args[1]);
+ }
+
+typedef T (*cls_ret_T)(T, ...);
+
+int main (void)
+{
+  ffi_cif cif;
+  void *code;
+  ffi_closure *pcl = ffi_closure_alloc(sizeof(ffi_closure), &code);
+  ffi_type * cl_arg_types[3];
+  T res;
+
+  cl_arg_types[0] = &ffi_type_ulong;
+  cl_arg_types[1] = &ffi_type_ulong;
+  cl_arg_types[2] = NULL;
+
+  /* Initialize the cif */
+  CHECK(ffi_prep_cif_var(&cif, FFI_DEFAULT_ABI, 1, 2,
+			 &ffi_type_ulong, cl_arg_types) == FFI_OK);
+
+  CHECK(ffi_prep_closure_loc(pcl, &cif, cls_ret_T_fn, NULL, code)  == FFI_OK);
+  res = ((((cls_ret_T)code)(67, 4)));
+  /* { dg-output "67: 67 4" } */
+  printf("res: %ld\n", res);
+  /* { dg-output "\nres: 67" } */
+  exit(0);
+}
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_ulonglong.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_ulonglong.c
index 235ab44..62f2cae 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_ulonglong.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_ulonglong.c
@@ -11,7 +11,7 @@
 static void cls_ret_ulonglong_fn(ffi_cif* cif __UNUSED__, void* resp,
 				 void** args, void* userdata __UNUSED__)
 {
-  *(unsigned long long *)resp=  *(unsigned long long *)args[0];
+  *(unsigned long long *)resp= 0xfffffffffffffffLL ^ *(unsigned long long *)args[0];
 
   printf("%" PRIuLL ": %" PRIuLL "\n",*(unsigned long long *)args[0],
 	 *(unsigned long long *)(resp));
@@ -34,14 +34,14 @@
 		     &ffi_type_uint64, cl_arg_types) == FFI_OK);
   CHECK(ffi_prep_closure_loc(pcl, &cif, cls_ret_ulonglong_fn, NULL, code)  == FFI_OK);
   res = (*((cls_ret_ulonglong)code))(214LL);
-  /* { dg-output "214: 214" } */
+  /* { dg-output "214: 1152921504606846761" } */
   printf("res: %" PRIdLL "\n", res);
-  /* { dg-output "\nres: 214" } */
+  /* { dg-output "\nres: 1152921504606846761" } */
 
   res = (*((cls_ret_ulonglong)code))(9223372035854775808LL);
-  /* { dg-output "\n9223372035854775808: 9223372035854775808" } */
+  /* { dg-output "\n9223372035854775808: 8070450533247928831" } */
   printf("res: %" PRIdLL "\n", res);
-  /* { dg-output "\nres: 9223372035854775808" } */
+  /* { dg-output "\nres: 8070450533247928831" } */
 
   exit(0);
 }
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/cls_ushort_va.c b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_ushort_va.c
new file mode 100644
index 0000000..37aa106
--- /dev/null
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/cls_ushort_va.c
@@ -0,0 +1,44 @@
+/* Area:	closure_call
+   Purpose:	Test anonymous unsigned short argument.
+   Limitations:	none.
+   PR:		none.
+   Originator:	ARM Ltd. */
+
+/* { dg-do run } */
+#include "ffitest.h"
+
+typedef unsigned short T;
+
+static void cls_ret_T_fn(ffi_cif* cif __UNUSED__, void* resp, void** args,
+			 void* userdata __UNUSED__)
+ {
+   *(ffi_arg *)resp = *(T *)args[0];
+
+   printf("%d: %d %d\n", (int)(*(ffi_arg *)resp), *(T *)args[0], *(T *)args[1]);
+ }
+
+typedef T (*cls_ret_T)(T, ...);
+
+int main (void)
+{
+  ffi_cif cif;
+  void *code;
+  ffi_closure *pcl = ffi_closure_alloc(sizeof(ffi_closure), &code);
+  ffi_type * cl_arg_types[3];
+  T res;
+
+  cl_arg_types[0] = &ffi_type_ushort;
+  cl_arg_types[1] = &ffi_type_ushort;
+  cl_arg_types[2] = NULL;
+
+  /* Initialize the cif */
+  CHECK(ffi_prep_cif_var(&cif, FFI_DEFAULT_ABI, 1, 2,
+			 &ffi_type_ushort, cl_arg_types) == FFI_OK);
+
+  CHECK(ffi_prep_closure_loc(pcl, &cif, cls_ret_T_fn, NULL, code)  == FFI_OK);
+  res = ((((cls_ret_T)code)(67, 4)));
+  /* { dg-output "67: 67 4" } */
+  printf("res: %d\n", res);
+  /* { dg-output "\nres: 67" } */
+  exit(0);
+}
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/err_bad_abi.c b/Modules/_ctypes/libffi/testsuite/libffi.call/err_bad_abi.c
index a21a3fd..f5a7317 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/err_bad_abi.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/err_bad_abi.c
@@ -4,7 +4,8 @@
    PR:			none.
    Originator:	Blake Chaffin 6/6/2007	 */
 
-/* { dg-do run { xfail *-*-* } } */
+/* { dg-do run } */
+
 #include "ffitest.h"
 
 static void
@@ -17,11 +18,9 @@
 	ffi_cif cif;
         void *code;
 	ffi_closure *pcl = ffi_closure_alloc(sizeof(ffi_closure), &code);
-	void* args[1];
 	ffi_type* arg_types[1];
 
 	arg_types[0] = NULL;
-	args[0] = NULL;
 
 	CHECK(ffi_prep_cif(&cif, 255, 0, &ffi_type_void,
 		arg_types) == FFI_BAD_ABI);
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/err_bad_typedef.c b/Modules/_ctypes/libffi/testsuite/libffi.call/err_bad_typedef.c
index bd2fc54..bf60161 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/err_bad_typedef.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/err_bad_typedef.c
@@ -4,7 +4,8 @@
    PR:			none.
    Originator:	Blake Chaffin 6/6/2007	 */
 
-/* { dg-do run { xfail *-*-* } } */
+/* { dg-do run } */
+
 #include "ffitest.h"
 
 int main (void)
@@ -12,10 +13,10 @@
 	ffi_cif cif;
 	ffi_type* arg_types[1];
 
-	arg_types[0] = NULL;
-
 	ffi_type	badType	= ffi_type_void;
 
+	arg_types[0] = NULL;
+
 	badType.size = 0;
 
 	CHECK(ffi_prep_cif(&cif, FFI_DEFAULT_ABI, 0, &badType,
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/fastthis1_win32.c b/Modules/_ctypes/libffi/testsuite/libffi.call/fastthis1_win32.c
new file mode 100644
index 0000000..cbc4724
--- /dev/null
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/fastthis1_win32.c
@@ -0,0 +1,50 @@
+/* Area:	ffi_call
+   Purpose:	Check fastcall fct call on X86_WIN32 systems.
+   Limitations:	none.
+   PR:		none.
+   Originator:	From the original ffitest.c  */
+
+/* { dg-do run { target i?86-*-cygwin* i?86-*-mingw* } } */
+
+#include "ffitest.h"
+
+static size_t __FASTCALL__ my_fastcall_f(char *s, float a)
+{
+  return (size_t) ((int) strlen(s) + (int) a);
+}
+
+int main (void)
+{
+  ffi_cif cif;
+  ffi_type *args[MAX_ARGS];
+  void *values[MAX_ARGS];
+  ffi_arg rint;
+  char *s;
+  float v2;
+  args[0] = &ffi_type_pointer;
+  args[1] = &ffi_type_float;
+  values[0] = (void*) &s;
+  values[1] = (void*) &v2;
+  
+  /* Initialize the cif */
+  CHECK(ffi_prep_cif(&cif, FFI_FASTCALL, 2,
+		       &ffi_type_sint, args) == FFI_OK);
+  
+  s = "a";
+  v2 = 0.0;
+  ffi_call(&cif, FFI_FN(my_fastcall_f), &rint, values);
+  CHECK(rint == 1);
+  
+  s = "1234567";
+  v2 = -1.0;
+  ffi_call(&cif, FFI_FN(my_fastcall_f), &rint, values);
+  CHECK(rint == 6);
+  
+  s = "1234567890123456789012345";
+  v2 = 1.0;
+  ffi_call(&cif, FFI_FN(my_fastcall_f), &rint, values);
+  CHECK(rint == 26);
+  
+  printf("fastcall fct1 tests passed\n");
+  exit(0);
+}
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/fastthis2_win32.c b/Modules/_ctypes/libffi/testsuite/libffi.call/fastthis2_win32.c
new file mode 100644
index 0000000..7bdd0e1
--- /dev/null
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/fastthis2_win32.c
@@ -0,0 +1,50 @@
+/* Area:	ffi_call
+   Purpose:	Check fastcall fct call on X86_WIN32 systems.
+   Limitations:	none.
+   PR:		none.
+   Originator:	From the original ffitest.c  */
+
+/* { dg-do run { target i?86-*-cygwin* i?86-*-mingw* } } */
+
+#include "ffitest.h"
+
+static size_t __FASTCALL__ my_fastcall_f(float a, char *s)
+{
+  return (size_t) ((int) strlen(s) + (int) a);
+}
+
+int main (void)
+{
+  ffi_cif cif;
+  ffi_type *args[MAX_ARGS];
+  void *values[MAX_ARGS];
+  ffi_arg rint;
+  char *s;
+  float v2;
+  args[1] = &ffi_type_pointer;
+  args[0] = &ffi_type_float;
+  values[1] = (void*) &s;
+  values[0] = (void*) &v2;
+  
+  /* Initialize the cif */
+  CHECK(ffi_prep_cif(&cif, FFI_FASTCALL, 2,
+		       &ffi_type_sint, args) == FFI_OK);
+  
+  s = "a";
+  v2 = 0.0;
+  ffi_call(&cif, FFI_FN(my_fastcall_f), &rint, values);
+  CHECK(rint == 1);
+  
+  s = "1234567";
+  v2 = -1.0;
+  ffi_call(&cif, FFI_FN(my_fastcall_f), &rint, values);
+  CHECK(rint == 6);
+  
+  s = "1234567890123456789012345";
+  v2 = 1.0;
+  ffi_call(&cif, FFI_FN(my_fastcall_f), &rint, values);
+  CHECK(rint == 26);
+  
+  printf("fastcall fct2 tests passed\n");
+  exit(0);
+}
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/fastthis3_win32.c b/Modules/_ctypes/libffi/testsuite/libffi.call/fastthis3_win32.c
new file mode 100644
index 0000000..b5d606d
--- /dev/null
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/fastthis3_win32.c
@@ -0,0 +1,56 @@
+/* Area:	ffi_call
+   Purpose:	Check fastcall f call on X86_WIN32 systems.
+   Limitations:	none.
+   PR:		none.
+   Originator:	From the original ffitest.c  */
+
+/* { dg-do run { target i?86-*-cygwin* i?86-*-mingw* } } */
+
+#include "ffitest.h"
+
+static size_t __FASTCALL__ my_fastcall_f(float a, char *s, int i)
+{
+  return (size_t) ((int) strlen(s) + (int) a + i);
+}
+
+int main (void)
+{
+  ffi_cif cif;
+  ffi_type *args[MAX_ARGS];
+  void *values[MAX_ARGS];
+  ffi_arg rint;
+  char *s;
+  int v1;
+  float v2;
+  args[2] = &ffi_type_sint;
+  args[1] = &ffi_type_pointer;
+  args[0] = &ffi_type_float;
+  values[2] = (void*) &v1;
+  values[1] = (void*) &s;
+  values[0] = (void*) &v2;
+  
+  /* Initialize the cif */
+  CHECK(ffi_prep_cif(&cif, FFI_FASTCALL, 3,
+		       &ffi_type_sint, args) == FFI_OK);
+  
+  s = "a";
+  v1 = 1;
+  v2 = 0.0;
+  ffi_call(&cif, FFI_FN(my_fastcall_f), &rint, values);
+  CHECK(rint == 2);
+  
+  s = "1234567";
+  v2 = -1.0;
+  v1 = -2;
+  ffi_call(&cif, FFI_FN(my_fastcall_f), &rint, values);
+  CHECK(rint == 4);
+  
+  s = "1234567890123456789012345";
+  v2 = 1.0;
+  v1 = 2;
+  ffi_call(&cif, FFI_FN(my_fastcall_f), &rint, values);
+  CHECK(rint == 28);
+  
+  printf("fastcall fct3 tests passed\n");
+  exit(0);
+}
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/ffitest.h b/Modules/_ctypes/libffi/testsuite/libffi.call/ffitest.h
index 2cb9849..136a7a6 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/ffitest.h
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/ffitest.h
@@ -15,7 +15,7 @@
 
 #define MAX_ARGS 256
 
-#define CHECK(x) !(x) ? abort() : 0
+#define CHECK(x) !(x) ? (abort(), 1) : 0
 
 /* Define __UNUSED__ that also other compilers than gcc can run the tests.  */
 #undef __UNUSED__
@@ -25,6 +25,14 @@
 #define __UNUSED__
 #endif
 
+/* Define __FASTCALL__ so that other compilers than gcc can run the tests.  */
+#undef __FASTCALL__
+#if defined _MSC_VER
+#define __FASTCALL__ __fastcall
+#else
+#define __FASTCALL__ __attribute__((fastcall))
+#endif
+
 /* Prefer MAP_ANON(YMOUS) to /dev/zero, since we don't need to keep a
    file open.  */
 #ifdef HAVE_MMAP_ANON
@@ -67,6 +75,8 @@
 #define PRIdLL "ld"
 #undef PRIuLL
 #define PRIuLL "lu"
+#define PRId8 "hd"
+#define PRIu8 "hu"
 #define PRId64 "ld"
 #define PRIu64 "lu"
 #define PRIuPTR "lu"
@@ -77,6 +87,28 @@
 #define PRIuPTR "lu"
 #endif
 
+/* IRIX kludge.  */
+#if defined(__sgi)
+/* IRIX 6.5 <inttypes.h> provides all definitions, but only for C99
+   compilations.  */
+#define PRId8 "hhd"
+#define PRIu8 "hhu"
+#if (_MIPS_SZLONG == 32)
+#define PRId64 "lld"
+#define PRIu64 "llu"
+#endif
+/* This doesn't match <inttypes.h>, which always has "lld" here, but the
+   arguments are uint64_t, int64_t, which are unsigned long, long for
+   64-bit in <sgidefs.h>.  */
+#if (_MIPS_SZLONG == 64)
+#define PRId64 "ld"
+#define PRIu64 "lu"
+#endif
+/* This doesn't match <inttypes.h>, which has "u" here, but the arguments
+   are uintptr_t, which is always unsigned long.  */
+#define PRIuPTR "lu"
+#endif
+
 /* Solaris < 10 kludge.  */
 #if defined(__sun__) && defined(__svr4__) && !defined(PRIuPTR)
 #if defined(__arch64__) || defined (__x86_64__)
@@ -86,44 +118,15 @@
 #endif
 #endif
 
-#ifdef USING_MMAP
-static inline void *
-allocate_mmap (size_t size)
-{
-  void *page;
-#if defined (HAVE_MMAP_DEV_ZERO)
-  static int dev_zero_fd = -1;
+/* MSVC kludge.  */
+#if defined _MSC_VER
+#define PRIuPTR "lu"
+#define PRIu8 "u"
+#define PRId8 "d"
+#define PRIu64 "I64u"
+#define PRId64 "I64d"
 #endif
 
-#ifdef HAVE_MMAP_DEV_ZERO
-  if (dev_zero_fd == -1)
-    {
-      dev_zero_fd = open ("/dev/zero", O_RDONLY);
-      if (dev_zero_fd == -1)
-	{
-	  perror ("open /dev/zero: %m");
-	  exit (1);
-	}
-    }
-#endif
-
-
-#ifdef HAVE_MMAP_ANON
-  page = mmap (NULL, size, PROT_READ | PROT_WRITE | PROT_EXEC,
-	       MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
-#endif
-#ifdef HAVE_MMAP_DEV_ZERO
-  page = mmap (NULL, size, PROT_READ | PROT_WRITE | PROT_EXEC,
-	       MAP_PRIVATE, dev_zero_fd, 0);
-#endif
-
-  if (page == (void *) MAP_FAILED)
-    {
-      perror ("virtual memory exhausted");
-      exit (1);
-    }
-
-  return page;
-}
-
+#ifndef PRIuPTR
+#define PRIuPTR "u"
 #endif
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/float_va.c b/Modules/_ctypes/libffi/testsuite/libffi.call/float_va.c
new file mode 100644
index 0000000..5acff91
--- /dev/null
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/float_va.c
@@ -0,0 +1,107 @@
+/* Area:        fp and variadics
+   Purpose:     check fp inputs and returns work on variadics, even the fixed params
+   Limitations: None
+   PR:          none
+   Originator:  <david.gilbert@linaro.org> 2011-01-25
+
+   Intended to stress the difference in ABI on ARM vfp
+*/
+
+/* { dg-do run } */
+
+#include <stdarg.h>
+
+#include "ffitest.h"
+
+/* prints out all the parameters, and returns the sum of them all.
+ * 'x' is the number of variadic parameters all of which are double in this test
+ */
+double float_va_fn(unsigned int x, double y,...)
+{
+  double total=0.0;
+  va_list ap;
+  unsigned int i;
+
+  total+=(double)x;
+  total+=y;
+
+  printf("%u: %.1f :", x, y);
+
+  va_start(ap, y);
+  for(i=0;i<x;i++)
+  {
+    double arg=va_arg(ap, double);
+    total+=arg;
+    printf(" %d:%.1f ", i, arg);
+  }
+  va_end(ap);
+
+  printf(" total: %.1f\n", total);
+
+  return total;
+}
+
+int main (void)
+{
+  ffi_cif    cif;
+
+  ffi_type    *arg_types[5];
+  void        *values[5];
+  double        doubles[5];
+  unsigned int firstarg;
+  double        resfp;
+
+  /* First test, pass float_va_fn(0,2.0) - note there are no actual
+   * variadic parameters, but it's declared variadic so the ABI may be
+   * different. */
+  /* Call it statically and then via ffi */
+  resfp=float_va_fn(0,2.0);
+  /* { dg-output "0: 2.0 : total: 2.0" } */
+  printf("compiled: %.1f\n", resfp);
+  /* { dg-output "\ncompiled: 2.0" } */
+
+  arg_types[0] = &ffi_type_uint;
+  arg_types[1] = &ffi_type_double;
+  arg_types[2] = NULL;
+  CHECK(ffi_prep_cif_var(&cif, FFI_DEFAULT_ABI, 2, 2,
+        &ffi_type_double, arg_types) == FFI_OK);
+
+  firstarg = 0;
+  doubles[0] = 2.0;
+  values[0] = &firstarg;
+  values[1] = &doubles[0];
+  ffi_call(&cif, FFI_FN(float_va_fn), &resfp, values);
+  /* { dg-output "\n0: 2.0 : total: 2.0" } */
+  printf("ffi: %.1f\n", resfp);
+  /* { dg-output "\nffi: 2.0" } */
+
+  /* Second test, float_va_fn(2,2.0,3.0,4.0), now with variadic params */
+  /* Call it statically and then via ffi */
+  resfp=float_va_fn(2,2.0,3.0,4.0);
+  /* { dg-output "\n2: 2.0 : 0:3.0  1:4.0  total: 11.0" } */
+  printf("compiled: %.1f\n", resfp);
+  /* { dg-output "\ncompiled: 11.0" } */
+
+  arg_types[0] = &ffi_type_uint;
+  arg_types[1] = &ffi_type_double;
+  arg_types[2] = &ffi_type_double;
+  arg_types[3] = &ffi_type_double;
+  arg_types[4] = NULL;
+  CHECK(ffi_prep_cif_var(&cif, FFI_DEFAULT_ABI, 2, 4,
+        &ffi_type_double, arg_types) == FFI_OK);
+
+  firstarg = 2;
+  doubles[0] = 2.0;
+  doubles[1] = 3.0;
+  doubles[2] = 4.0;
+  values[0] = &firstarg;
+  values[1] = &doubles[0];
+  values[2] = &doubles[1];
+  values[3] = &doubles[2];
+  ffi_call(&cif, FFI_FN(float_va_fn), &resfp, values);
+  /* { dg-output "\n2: 2.0 : 0:3.0  1:4.0  total: 11.0" } */
+  printf("ffi: %.1f\n", resfp);
+  /* { dg-output "\nffi: 11.0" } */
+
+  exit(0);
+}
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/huge_struct.c b/Modules/_ctypes/libffi/testsuite/libffi.call/huge_struct.c
index 9cffb71..657fe54 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/huge_struct.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/huge_struct.c
@@ -7,7 +7,8 @@
 
 /* { dg-excess-errors "" { target x86_64-*-mingw* x86_64-*-cygwin* } } */
 /* { dg-do run { xfail strongarm*-*-* xscale*-*-* } } */
-/* { dg-options -mlong-double-128 { target powerpc64*-*-* } } */
+/* { dg-options -mlong-double-128 { target powerpc64*-*-linux* } } */
+/* { dg-options -Wformat=0 { target moxie*-*-elf } } */
 /* { dg-output "" { xfail x86_64-*-mingw* x86_64-*-cygwin* } } */
 
 #include "ffitest.h"
@@ -129,14 +130,14 @@
 			ui64_4 + 4, si64_4 + 4, f_4 + 4, d_4 + 4, ld_4 + 4, (char*)((intptr_t)p_4 + 4), 
 		ui8_5 + 5, si8_5 + 5};
 
-	printf("%hhu %hhd %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx "
-		"%hhu %hhd %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx "
-		"%hhu %hhd %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx "
-		"%hhu %hhd %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx %hhu %hhd: "
-		"%hhu %hhd %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx "
-		"%hhu %hhd %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx "
-		"%hhu %hhd %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx "
-		"%hhu %hhd %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx %hhu %hhd\n",
+	printf("%" PRIu8 " %" PRId8 " %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx "
+		"%" PRIu8 " %" PRId8 " %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx "
+		"%" PRIu8 " %" PRId8 " %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx "
+		"%" PRIu8 " %" PRId8 " %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx %" PRIu8 " %" PRId8 ": "
+		"%" PRIu8 " %" PRId8 " %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx "
+		"%" PRIu8 " %" PRId8 " %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx "
+		"%" PRIu8 " %" PRId8 " %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx "
+		"%" PRIu8 " %" PRId8 " %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx %" PRIu8 " %" PRId8 "\n",
 	       ui8_1, si8_1, ui16_1, si16_1, ui32_1, si32_1, ui64_1, si64_1, f_1, d_1, ld_1, (unsigned long)p_1,
 		ui8_2, si8_2, ui16_2, si16_2, ui32_2, si32_2, ui64_2, si64_2, f_2, d_2, ld_2, (unsigned long)p_2,
 		ui8_3, si8_3, ui16_3, si16_3, ui32_3, si32_3, ui64_3, si64_3, f_3, d_3, ld_3, (unsigned long)p_3,
@@ -229,6 +230,19 @@
 	ffi_type*	st_fields[51];
 	BigStruct	retVal;
 
+	uint8_t		ui8		= 1;
+	int8_t		si8		= 2;
+	uint16_t	ui16	= 3;
+	int16_t		si16	= 4;
+	uint32_t	ui32	= 5;
+	int32_t		si32	= 6;
+	uint64_t	ui64	= 7;
+	int64_t		si64	= 8;
+	float		f		= 9;
+	double		d		= 10;
+	long double	ld		= 11;
+	char*		p		= (char*)0x12345678;
+
 	memset (&retVal, 0, sizeof(retVal));
 
 	ret_struct_type.size = 0;
@@ -251,19 +265,6 @@
 
 	st_fields[50] = NULL;
 
-	uint8_t		ui8		= 1;
-	int8_t		si8		= 2;
-	uint16_t	ui16	= 3;
-	int16_t		si16	= 4;
-	uint32_t	ui32	= 5;
-	int32_t		si32	= 6;
-	uint64_t	ui64	= 7;
-	int64_t		si64	= 8;
-	float		f		= 9;
-	double		d		= 10;
-	long double	ld		= 11;
-	char*		p		= (char*)0x12345678;
-
 	argTypes[0]		= argTypes[12]	= argTypes[24]	= argTypes[36]	= argTypes[48]	= &ffi_type_uint8;
 	argValues[0]	= argValues[12]	= argValues[24]	= argValues[36]	= argValues[48]	= &ui8;
 	argTypes[1]		= argTypes[13]	= argTypes[25]	= argTypes[37]	= argTypes[49]	= &ffi_type_sint8;
@@ -295,11 +296,11 @@
 	CHECK(ffi_prep_cif(&cif, FFI_DEFAULT_ABI, 50, &ret_struct_type, argTypes) == FFI_OK);
 
 	ffi_call(&cif, FFI_FN(test_large_fn), &retVal, argValues);
-	// { dg-output "1 2 3 4 5 6 7 8 9 10 11 0x12345678 1 2 3 4 5 6 7 8 9 10 11 0x12345678 1 2 3 4 5 6 7 8 9 10 11 0x12345678 1 2 3 4 5 6 7 8 9 10 11 0x12345678 1 2: 2 3 4 5 6 7 8 9 10 11 12 0x12345679 3 4 5 6 7 8 9 10 11 12 13 0x1234567a 4 5 6 7 8 9 10 11 12 13 14 0x1234567b 5 6 7 8 9 10 11 12 13 14 15 0x1234567c 6 7" }
-	printf("res: %hhu %hhd %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx "
-		"%hhu %hhd %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx "
-		"%hhu %hhd %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx "
-		"%hhu %hhd %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx %hhu %hhd\n",
+	/* { dg-output "1 2 3 4 5 6 7 8 9 10 11 0x12345678 1 2 3 4 5 6 7 8 9 10 11 0x12345678 1 2 3 4 5 6 7 8 9 10 11 0x12345678 1 2 3 4 5 6 7 8 9 10 11 0x12345678 1 2: 2 3 4 5 6 7 8 9 10 11 12 0x12345679 3 4 5 6 7 8 9 10 11 12 13 0x1234567a 4 5 6 7 8 9 10 11 12 13 14 0x1234567b 5 6 7 8 9 10 11 12 13 14 15 0x1234567c 6 7" } */
+	printf("res: %" PRIu8 " %" PRId8 " %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx "
+		"%" PRIu8 " %" PRId8 " %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx "
+		"%" PRIu8 " %" PRId8 " %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx "
+		"%" PRIu8 " %" PRId8 " %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx %" PRIu8 " %" PRId8 "\n",
 		retVal.a, retVal.b, retVal.c, retVal.d, retVal.e, retVal.f,
 	       retVal.g, retVal.h, retVal.i, retVal.j, retVal.k, (unsigned long)retVal.l,
 		retVal.m, retVal.n, retVal.o, retVal.p, retVal.q, retVal.r,
@@ -308,7 +309,7 @@
 	       retVal.ee, retVal.ff, retVal.gg, retVal.hh, retVal.ii, (unsigned long)retVal.jj,
 		retVal.kk, retVal.ll, retVal.mm, retVal.nn, retVal.oo, retVal.pp,
 	       retVal.qq, retVal.rr, retVal.ss, retVal.tt, retVal.uu, (unsigned long)retVal.vv, retVal.ww, retVal.xx);
-	// { dg-output "\nres: 2 3 4 5 6 7 8 9 10 11 12 0x12345679 3 4 5 6 7 8 9 10 11 12 13 0x1234567a 4 5 6 7 8 9 10 11 12 13 14 0x1234567b 5 6 7 8 9 10 11 12 13 14 15 0x1234567c 6 7" }
+	/* { dg-output "\nres: 2 3 4 5 6 7 8 9 10 11 12 0x12345679 3 4 5 6 7 8 9 10 11 12 13 0x1234567a 4 5 6 7 8 9 10 11 12 13 14 0x1234567b 5 6 7 8 9 10 11 12 13 14 15 0x1234567c 6 7" } */
 
 	CHECK(ffi_prep_closure_loc(pcl, &cif, cls_large_fn, NULL, code) == FFI_OK);
 
@@ -323,11 +324,11 @@
 		ui8, si8, ui16, si16, ui32, si32, ui64, si64, f, d, ld, p,
 		ui8, si8, ui16, si16, ui32, si32, ui64, si64, f, d, ld, p,
 		ui8, si8);
-	// { dg-output "\n1 2 3 4 5 6 7 8 9 10 11 0x12345678 1 2 3 4 5 6 7 8 9 10 11 0x12345678 1 2 3 4 5 6 7 8 9 10 11 0x12345678 1 2 3 4 5 6 7 8 9 10 11 0x12345678 1 2: 2 3 4 5 6 7 8 9 10 11 12 0x12345679 3 4 5 6 7 8 9 10 11 12 13 0x1234567a 4 5 6 7 8 9 10 11 12 13 14 0x1234567b 5 6 7 8 9 10 11 12 13 14 15 0x1234567c 6 7" }
-	printf("res: %hhu %hhd %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx "
-		"%hhu %hhd %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx "
-		"%hhu %hhd %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx "
-		"%hhu %hhd %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx %hhu %hhd\n",
+	/* { dg-output "\n1 2 3 4 5 6 7 8 9 10 11 0x12345678 1 2 3 4 5 6 7 8 9 10 11 0x12345678 1 2 3 4 5 6 7 8 9 10 11 0x12345678 1 2 3 4 5 6 7 8 9 10 11 0x12345678 1 2: 2 3 4 5 6 7 8 9 10 11 12 0x12345679 3 4 5 6 7 8 9 10 11 12 13 0x1234567a 4 5 6 7 8 9 10 11 12 13 14 0x1234567b 5 6 7 8 9 10 11 12 13 14 15 0x1234567c 6 7" } */
+	printf("res: %" PRIu8 " %" PRId8 " %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx "
+		"%" PRIu8 " %" PRId8 " %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx "
+		"%" PRIu8 " %" PRId8 " %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx "
+		"%" PRIu8 " %" PRId8 " %hu %hd %u %d %" PRIu64 " %" PRId64 " %.0f %.0f %.0Lf %#lx %" PRIu8 " %" PRId8 "\n",
 		retVal.a, retVal.b, retVal.c, retVal.d, retVal.e, retVal.f,
 	       retVal.g, retVal.h, retVal.i, retVal.j, retVal.k, (unsigned long)retVal.l,
 		retVal.m, retVal.n, retVal.o, retVal.p, retVal.q, retVal.r,
@@ -336,7 +337,7 @@
 	       retVal.ee, retVal.ff, retVal.gg, retVal.hh, retVal.ii, (unsigned long)retVal.jj,
 		retVal.kk, retVal.ll, retVal.mm, retVal.nn, retVal.oo, retVal.pp,
 	       retVal.qq, retVal.rr, retVal.ss, retVal.tt, retVal.uu, (unsigned long)retVal.vv, retVal.ww, retVal.xx);
-	// { dg-output "\nres: 2 3 4 5 6 7 8 9 10 11 12 0x12345679 3 4 5 6 7 8 9 10 11 12 13 0x1234567a 4 5 6 7 8 9 10 11 12 13 14 0x1234567b 5 6 7 8 9 10 11 12 13 14 15 0x1234567c 6 7" }
+	/* { dg-output "\nres: 2 3 4 5 6 7 8 9 10 11 12 0x12345679 3 4 5 6 7 8 9 10 11 12 13 0x1234567a 4 5 6 7 8 9 10 11 12 13 14 0x1234567b 5 6 7 8 9 10 11 12 13 14 15 0x1234567c 6 7" } */
 
     return 0;
 }
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/many2.c b/Modules/_ctypes/libffi/testsuite/libffi.call/many2.c
new file mode 100644
index 0000000..98eac60
--- /dev/null
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/many2.c
@@ -0,0 +1,57 @@
+/* Area:        ffi_call
+   Purpose:     Check uint8_t arguments.
+   Limitations: none.
+   PR:          PR45677.
+   Originator:  Dan Witte <dwitte@gmail.com> 20100916  */
+
+/* { dg-do run } */
+
+#include "ffitest.h"
+
+#define NARGS 7
+
+typedef unsigned char u8;
+
+#ifdef __GNUC__
+__attribute__((noinline))
+#endif
+uint8_t
+foo (uint8_t a, uint8_t b, uint8_t c, uint8_t d,
+     uint8_t e, uint8_t f, uint8_t g)
+{
+  return a + b + c + d + e + f + g;
+}
+
+uint8_t
+bar (uint8_t a, uint8_t b, uint8_t c, uint8_t d,
+     uint8_t e, uint8_t f, uint8_t g)
+{
+  return foo (a, b, c, d, e, f, g);
+}
+
+int
+main (void)
+{
+  ffi_type *ffitypes[NARGS];
+  int i;
+  ffi_cif cif;
+  ffi_arg result = 0;
+  uint8_t args[NARGS];
+  void *argptrs[NARGS];
+
+  for (i = 0; i < NARGS; ++i)
+    ffitypes[i] = &ffi_type_uint8;
+
+  CHECK (ffi_prep_cif (&cif, FFI_DEFAULT_ABI, NARGS,
+		       &ffi_type_uint8, ffitypes) == FFI_OK);
+
+  for (i = 0; i < NARGS; ++i)
+    {
+      args[i] = i;
+      argptrs[i] = &args[i];
+    }
+  ffi_call (&cif, FFI_FN (bar), &result, argptrs);
+
+  CHECK (result == 21);
+  return 0;
+}
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/many2_win32.c b/Modules/_ctypes/libffi/testsuite/libffi.call/many2_win32.c
new file mode 100644
index 0000000..4adbe4d
--- /dev/null
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/many2_win32.c
@@ -0,0 +1,63 @@
+/* Area:	ffi_call
+   Purpose:	Check stdcall many call on X86_WIN32 systems.
+   Limitations:	none.
+   PR:		none.
+   Originator:	From the original ffitest.c  */
+
+/* { dg-do run { target i?86-*-cygwin* i?86-*-mingw* } } */
+
+#include "ffitest.h"
+#include <float.h>
+
+static float __attribute__((fastcall)) fastcall_many(float f1,
+						   float f2,
+						   float f3,
+						   float f4,
+						   float f5,
+						   float f6,
+						   float f7,
+						   float f8,
+						   float f9,
+						   float f10,
+						   float f11,
+						   float f12,
+						   float f13)
+{
+  return ((f1/f2+f3/f4+f5/f6+f7/f8+f9/f10+f11/f12) * f13);
+}
+
+int main (void)
+{
+  ffi_cif cif;
+  ffi_type *args[13];
+  void *values[13];
+  float fa[13];
+  float f, ff;
+  unsigned long ul;
+
+  for (ul = 0; ul < 13; ul++)
+    {
+      args[ul] = &ffi_type_float;
+      values[ul] = &fa[ul];
+	fa[ul] = (float) ul;
+    }
+
+  /* Initialize the cif */
+  CHECK(ffi_prep_cif(&cif, FFI_FASTCALL, 13,
+		     &ffi_type_float, args) == FFI_OK);
+
+  ff =  fastcall_many(fa[0], fa[1],
+		     fa[2], fa[3],
+		     fa[4], fa[5],
+		     fa[6], fa[7],
+		     fa[8], fa[9],
+		     fa[10], fa[11], fa[12]);
+
+  ffi_call(&cif, FFI_FN(fastcall_many), &f, values);
+
+  if (f - ff < FLT_EPSILON)
+    printf("fastcall many arg tests ok!\n");
+  else
+    CHECK(0);
+  exit(0);
+}
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/negint.c b/Modules/_ctypes/libffi/testsuite/libffi.call/negint.c
index 3168113..6e2f26f 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/negint.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/negint.c
@@ -5,7 +5,6 @@
    Originator:	From the original ffitest.c  */
 
 /* { dg-do run } */
-/* { dg-options -O2 } */
 
 #include "ffitest.h"
 
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct.c b/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct.c
index 8aa527e..c15e3a0 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct.c
@@ -77,6 +77,12 @@
   ffi_type cls_struct_type, cls_struct_type1, cls_struct_type2;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_16byte1 e_dbl = { 9.0, 2.0, 6};
+  struct cls_struct_16byte2 f_dbl = { 1, 2.0, 3.0};
+  struct cls_struct_combined g_dbl = {{4.0, 5.0, 6},
+				      {3, 1.0, 8.0}};
+  struct cls_struct_combined res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
@@ -92,12 +98,6 @@
   cls_struct_type2.type = FFI_TYPE_STRUCT;
   cls_struct_type2.elements = cls_struct_fields2;
 
-  struct cls_struct_16byte1 e_dbl = { 9.0, 2.0, 6};
-  struct cls_struct_16byte2 f_dbl = { 1, 2.0, 3.0};
-  struct cls_struct_combined g_dbl = {{4.0, 5.0, 6},
-				      {3, 1.0, 8.0}};
-  struct cls_struct_combined res_dbl;
-
   cls_struct_fields[0] = &ffi_type_double;
   cls_struct_fields[1] = &ffi_type_float;
   cls_struct_fields[2] = &ffi_type_sint;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct1.c b/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct1.c
index 2a9f515..477a6b9 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct1.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct1.c
@@ -81,6 +81,13 @@
   ffi_type cls_struct_type, cls_struct_type1, cls_struct_type2;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_16byte1 e_dbl = { 9.0, 2.0, 6};
+  struct cls_struct_16byte2 f_dbl = { 1, 2.0, 3.0};
+  struct cls_struct_combined g_dbl = {{4.0, 5.0, 6},
+				      {3, 1.0, 8.0}};
+  struct cls_struct_16byte1 h_dbl = { 3.0, 2.0, 4};
+  struct cls_struct_combined res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
@@ -96,13 +103,6 @@
   cls_struct_type2.type = FFI_TYPE_STRUCT;
   cls_struct_type2.elements = cls_struct_fields2;
 
-  struct cls_struct_16byte1 e_dbl = { 9.0, 2.0, 6};
-  struct cls_struct_16byte2 f_dbl = { 1, 2.0, 3.0};
-  struct cls_struct_combined g_dbl = {{4.0, 5.0, 6},
-				      {3, 1.0, 8.0}};
-  struct cls_struct_16byte1 h_dbl = { 3.0, 2.0, 4};
-  struct cls_struct_combined res_dbl;
-
   cls_struct_fields[0] = &ffi_type_double;
   cls_struct_fields[1] = &ffi_type_float;
   cls_struct_fields[2] = &ffi_type_sint;
@@ -156,6 +156,6 @@
   CHECK( res_dbl.e.ii == (e_dbl.c + f_dbl.ii + g_dbl.e.ii));
   CHECK( res_dbl.e.dd == (e_dbl.a + f_dbl.dd + g_dbl.e.dd));
   CHECK( res_dbl.e.ff == (e_dbl.b + f_dbl.ff + g_dbl.e.ff));
-  //  CHECK( 1 == 0);
+  /*  CHECK( 1 == 0); */
   exit(0);
 }
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct10.c b/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct10.c
index d6a718b..34a74e7 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct10.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct10.c
@@ -67,6 +67,12 @@
   ffi_type cls_struct_type, cls_struct_type1, cls_struct_type2;
   ffi_type* dbl_arg_types[4];
 
+  struct A e_dbl = { 1LL, 7};
+  struct B f_dbl = { 99, {12LL , 127}, 255};
+  struct C g_dbl = { 2LL, 9};
+
+  struct B res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
@@ -82,12 +88,6 @@
   cls_struct_type2.type = FFI_TYPE_STRUCT;
   cls_struct_type2.elements = cls_struct_fields2;
 
-  struct A e_dbl = { 1LL, 7};
-  struct B f_dbl = { 99, {12LL , 127}, 255};
-  struct C g_dbl = { 2LL, 9};
-
-  struct B res_dbl;
-
   cls_struct_fields[0] = &ffi_type_uint64;
   cls_struct_fields[1] = &ffi_type_uchar;
   cls_struct_fields[2] = NULL;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct11.c b/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct11.c
new file mode 100644
index 0000000..fce6948
--- /dev/null
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct11.c
@@ -0,0 +1,121 @@
+/* Area:	ffi_call, closure_call
+   Purpose:	Check parameter passing with nested structs
+		of a single type.  This tests the special cases
+		for homogenous floating-point aggregates in the
+		AArch64 PCS.
+   Limitations:	none.
+   PR:		none.
+   Originator:  ARM Ltd.  */
+
+/* { dg-do run } */
+#include "ffitest.h"
+
+typedef struct A {
+  float a_x;
+  float a_y;
+} A;
+
+typedef struct B {
+  float b_x;
+  float b_y;
+} B;
+
+typedef struct C {
+  A a;
+  B b;
+} C;
+
+static C C_fn (int x, int y, int z, C source, int i, int j, int k)
+{
+  C result;
+  result.a.a_x = source.a.a_x;
+  result.a.a_y = source.a.a_y;
+  result.b.b_x = source.b.b_x;
+  result.b.b_y = source.b.b_y;
+
+  printf ("%d, %d, %d, %d, %d, %d\n", x, y, z, i, j, k);
+
+  printf ("%.1f, %.1f, %.1f, %.1f, "
+	  "%.1f, %.1f, %.1f, %.1f\n",
+	  source.a.a_x, source.a.a_y,
+	  source.b.b_x, source.b.b_y,
+	  result.a.a_x, result.a.a_y,
+	  result.b.b_x, result.b.b_y);
+
+  return result;
+}
+
+int main (void)
+{
+  ffi_cif cif;
+
+  ffi_type* struct_fields_source_a[3];
+  ffi_type* struct_fields_source_b[3];
+  ffi_type* struct_fields_source_c[3];
+  ffi_type* arg_types[8];
+
+  ffi_type struct_type_a, struct_type_b, struct_type_c;
+
+  struct A source_fld_a = {1.0, 2.0};
+  struct B source_fld_b = {4.0, 8.0};
+  int k = 1;
+
+  struct C result;
+  struct C source = {source_fld_a, source_fld_b};
+
+  struct_type_a.size = 0;
+  struct_type_a.alignment = 0;
+  struct_type_a.type = FFI_TYPE_STRUCT;
+  struct_type_a.elements = struct_fields_source_a;
+
+  struct_type_b.size = 0;
+  struct_type_b.alignment = 0;
+  struct_type_b.type = FFI_TYPE_STRUCT;
+  struct_type_b.elements = struct_fields_source_b;
+
+  struct_type_c.size = 0;
+  struct_type_c.alignment = 0;
+  struct_type_c.type = FFI_TYPE_STRUCT;
+  struct_type_c.elements = struct_fields_source_c;
+
+  struct_fields_source_a[0] = &ffi_type_float;
+  struct_fields_source_a[1] = &ffi_type_float;
+  struct_fields_source_a[2] = NULL;
+
+  struct_fields_source_b[0] = &ffi_type_float;
+  struct_fields_source_b[1] = &ffi_type_float;
+  struct_fields_source_b[2] = NULL;
+
+  struct_fields_source_c[0] = &struct_type_a;
+  struct_fields_source_c[1] = &struct_type_b;
+  struct_fields_source_c[2] = NULL;
+
+  arg_types[0] = &ffi_type_sint32;
+  arg_types[1] = &ffi_type_sint32;
+  arg_types[2] = &ffi_type_sint32;
+  arg_types[3] = &struct_type_c;
+  arg_types[4] = &ffi_type_sint32;
+  arg_types[5] = &ffi_type_sint32;
+  arg_types[6] = &ffi_type_sint32;
+  arg_types[7] = NULL;
+
+  void *args[7];
+  args[0] = &k;
+  args[1] = &k;
+  args[2] = &k;
+  args[3] = &source;
+  args[4] = &k;
+  args[5] = &k;
+  args[6] = &k;
+  CHECK (ffi_prep_cif (&cif, FFI_DEFAULT_ABI, 7, &struct_type_c,
+		       arg_types) == FFI_OK);
+
+  ffi_call (&cif, FFI_FN (C_fn), &result, args);
+  /* { dg-output "1, 1, 1, 1, 1, 1\n" } */
+  /* { dg-output "1.0, 2.0, 4.0, 8.0, 1.0, 2.0, 4.0, 8.0" } */
+  CHECK (result.a.a_x == source.a.a_x);
+  CHECK (result.a.a_y == source.a.a_y);
+  CHECK (result.b.b_x == source.b.b_x);
+  CHECK (result.b.b_y == source.b.b_y);
+  exit (0);
+}
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct2.c b/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct2.c
index de1584c..69268cd 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct2.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct2.c
@@ -57,6 +57,11 @@
   ffi_type cls_struct_type, cls_struct_type1;
   ffi_type* dbl_arg_types[3];
 
+  struct A e_dbl = { 1, 7};
+  struct B f_dbl = {{12 , 127}, 99};
+
+  struct B res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
@@ -67,11 +72,6 @@
   cls_struct_type1.type = FFI_TYPE_STRUCT;
   cls_struct_type1.elements = cls_struct_fields1;
 
-  struct A e_dbl = { 1, 7};
-  struct B f_dbl = {{12 , 127}, 99};
-
-  struct B res_dbl;
-
   cls_struct_fields[0] = &ffi_type_ulong;
   cls_struct_fields[1] = &ffi_type_uchar;
   cls_struct_fields[2] = NULL;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct3.c b/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct3.c
index 58aa853..ab18cad 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct3.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct3.c
@@ -58,6 +58,11 @@
   ffi_type cls_struct_type, cls_struct_type1;
   ffi_type* dbl_arg_types[3];
 
+  struct A e_dbl = { 1LL, 7};
+  struct B f_dbl = {{12LL , 127}, 99};
+
+  struct B res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
@@ -68,11 +73,6 @@
   cls_struct_type1.type = FFI_TYPE_STRUCT;
   cls_struct_type1.elements = cls_struct_fields1;
 
-  struct A e_dbl = { 1LL, 7};
-  struct B f_dbl = {{12LL , 127}, 99};
-
-  struct B res_dbl;
-
   cls_struct_fields[0] = &ffi_type_uint64;
   cls_struct_fields[1] = &ffi_type_uchar;
   cls_struct_fields[2] = NULL;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct4.c b/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct4.c
index 98e491e..2ffb4d6 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct4.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct4.c
@@ -58,6 +58,11 @@
   ffi_type cls_struct_type, cls_struct_type1;
   ffi_type* dbl_arg_types[3];
 
+  struct A e_dbl = { 1.0, 7};
+  struct B f_dbl = {{12.0 , 127}, 99};
+
+  struct B res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
@@ -68,11 +73,6 @@
   cls_struct_type1.type = FFI_TYPE_STRUCT;
   cls_struct_type1.elements = cls_struct_fields1;
 
-  struct A e_dbl = { 1.0, 7};
-  struct B f_dbl = {{12.0 , 127}, 99};
-
-  struct B res_dbl;
-
   cls_struct_fields[0] = &ffi_type_double;
   cls_struct_fields[1] = &ffi_type_uchar;
   cls_struct_fields[2] = NULL;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct5.c b/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct5.c
index d8e3537..6c79845 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct5.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct5.c
@@ -58,6 +58,11 @@
   ffi_type cls_struct_type, cls_struct_type1;
   ffi_type* dbl_arg_types[3];
 
+  struct A e_dbl = { 1.0, 7};
+  struct B f_dbl = {{12.0 , 127}, 99};
+
+  struct B res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
@@ -68,11 +73,6 @@
   cls_struct_type1.type = FFI_TYPE_STRUCT;
   cls_struct_type1.elements = cls_struct_fields1;
 
-  struct A e_dbl = { 1.0, 7};
-  struct B f_dbl = {{12.0 , 127}, 99};
-
-  struct B res_dbl;
-
   cls_struct_fields[0] = &ffi_type_longdouble;
   cls_struct_fields[1] = &ffi_type_uchar;
   cls_struct_fields[2] = NULL;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct6.c b/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct6.c
index 2f2b25a..59d3579 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct6.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct6.c
@@ -66,6 +66,12 @@
   ffi_type cls_struct_type, cls_struct_type1, cls_struct_type2;
   ffi_type* dbl_arg_types[4];
 
+  struct A e_dbl = { 1.0, 7};
+  struct B f_dbl = {{12.0 , 127}, 99};
+  struct C g_dbl = { 2, 9};
+
+  struct B res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
@@ -81,12 +87,6 @@
   cls_struct_type2.type = FFI_TYPE_STRUCT;
   cls_struct_type2.elements = cls_struct_fields2;
 
-  struct A e_dbl = { 1.0, 7};
-  struct B f_dbl = {{12.0 , 127}, 99};
-  struct C g_dbl = { 2, 9};
-
-  struct B res_dbl;
-
   cls_struct_fields[0] = &ffi_type_double;
   cls_struct_fields[1] = &ffi_type_uchar;
   cls_struct_fields[2] = NULL;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct7.c b/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct7.c
index 14c7023..27595e6 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct7.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct7.c
@@ -58,6 +58,11 @@
   ffi_type cls_struct_type, cls_struct_type1;
   ffi_type* dbl_arg_types[3];
 
+  struct A e_dbl = { 1LL, 7};
+  struct B f_dbl = {{12.0 , 127}, 99};
+
+  struct B res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
@@ -68,11 +73,6 @@
   cls_struct_type1.type = FFI_TYPE_STRUCT;
   cls_struct_type1.elements = cls_struct_fields1;
 
-  struct A e_dbl = { 1LL, 7};
-  struct B f_dbl = {{12.0 , 127}, 99};
-
-  struct B res_dbl;
-
   cls_struct_fields[0] = &ffi_type_uint64;
   cls_struct_fields[1] = &ffi_type_uchar;
   cls_struct_fields[2] = NULL;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct8.c b/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct8.c
index bb77ead..0e6c682 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct8.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct8.c
@@ -66,6 +66,12 @@
   ffi_type cls_struct_type, cls_struct_type1, cls_struct_type2;
   ffi_type* dbl_arg_types[4];
 
+  struct A e_dbl = { 1LL, 7};
+  struct B f_dbl = {{12LL , 127}, 99};
+  struct C g_dbl = { 2LL, 9};
+
+  struct B res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
@@ -81,12 +87,6 @@
   cls_struct_type2.type = FFI_TYPE_STRUCT;
   cls_struct_type2.elements = cls_struct_fields2;
 
-  struct A e_dbl = { 1LL, 7};
-  struct B f_dbl = {{12LL , 127}, 99};
-  struct C g_dbl = { 2LL, 9};
-
-  struct B res_dbl;
-
   cls_struct_fields[0] = &ffi_type_uint64;
   cls_struct_fields[1] = &ffi_type_uchar;
   cls_struct_fields[2] = NULL;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct9.c b/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct9.c
index e9f541c..5f7ac67 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct9.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/nested_struct9.c
@@ -66,6 +66,12 @@
   ffi_type cls_struct_type, cls_struct_type1, cls_struct_type2;
   ffi_type* dbl_arg_types[4];
 
+  struct A e_dbl = { 1, 7LL};
+  struct B f_dbl = {{12.0 , 127}, 99};
+  struct C g_dbl = { 2, 9};
+
+  struct B res_dbl;
+
   cls_struct_type.size = 0;
   cls_struct_type.alignment = 0;
   cls_struct_type.type = FFI_TYPE_STRUCT;
@@ -81,12 +87,6 @@
   cls_struct_type2.type = FFI_TYPE_STRUCT;
   cls_struct_type2.elements = cls_struct_fields2;
 
-  struct A e_dbl = { 1, 7LL};
-  struct B f_dbl = {{12.0 , 127}, 99};
-  struct C g_dbl = { 2, 9};
-
-  struct B res_dbl;
-
   cls_struct_fields[0] = &ffi_type_uchar;
   cls_struct_fields[1] = &ffi_type_uint64;
   cls_struct_fields[2] = NULL;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/return_dbl.c b/Modules/_ctypes/libffi/testsuite/libffi.call/return_dbl.c
index 1aab403..fd07e50 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/return_dbl.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/return_dbl.c
@@ -9,6 +9,7 @@
 
 static double return_dbl(double dbl)
 {
+  printf ("%f\n", dbl);
   return 2 * dbl;
 }
 int main (void)
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/return_sc.c b/Modules/_ctypes/libffi/testsuite/libffi.call/return_sc.c
index 19608ee..a36cf3e 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/return_sc.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/return_sc.c
@@ -30,7 +30,7 @@
        sc < (signed char) 127; sc++)
     {
       ffi_call(&cif, FFI_FN(return_sc), &rint, values);
-      CHECK(rint == (ffi_arg) sc);
+      CHECK((signed char)rint == sc);
     }
   exit(0);
 }
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/return_uc.c b/Modules/_ctypes/libffi/testsuite/libffi.call/return_uc.c
index 07c45de..6fe5546 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/return_uc.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/return_uc.c
@@ -32,7 +32,7 @@
        uc < (unsigned char) '\xff'; uc++)
     {
       ffi_call(&cif, FFI_FN(return_uc), &rint, values);
-      CHECK(rint == (signed int) uc);
+      CHECK((unsigned char)rint == uc);
     }
   exit(0);
 }
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/stret_large.c b/Modules/_ctypes/libffi/testsuite/libffi.call/stret_large.c
index 23a93b9..71c2469 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/stret_large.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/stret_large.c
@@ -9,8 +9,8 @@
 /* { dg-do run { xfail strongarm*-*-* xscale*-*-*  } } */
 #include "ffitest.h"
 
-// 13 FPRs: 104 bytes
-// 14 FPRs: 112 bytes
+/* 13 FPRs: 104 bytes */
+/* 14 FPRs: 112 bytes */
 
 typedef struct struct_108byte {
 	double a;
@@ -82,17 +82,17 @@
 	ffi_type cls_struct_type;
 	ffi_type* dbl_arg_types[5];
 
-	cls_struct_type.size = 0;
-	cls_struct_type.alignment = 0;
-	cls_struct_type.type = FFI_TYPE_STRUCT;
-	cls_struct_type.elements = cls_struct_fields;
-
 	struct_108byte e_dbl = { 9.0, 2.0, 6.0, 5.0, 3.0, 4.0, 8.0, 1.0, 1.0, 2.0, 3.0, 7.0, 2.0, 7 };
 	struct_108byte f_dbl = { 1.0, 2.0, 3.0, 7.0, 2.0, 5.0, 6.0, 7.0, 4.0, 5.0, 7.0, 9.0, 1.0, 4 };
 	struct_108byte g_dbl = { 4.0, 5.0, 7.0, 9.0, 1.0, 1.0, 2.0, 9.0, 8.0, 6.0, 1.0, 4.0, 0.0, 3 };
 	struct_108byte h_dbl = { 8.0, 6.0, 1.0, 4.0, 0.0, 3.0, 3.0, 1.0, 9.0, 2.0, 6.0, 5.0, 3.0, 2 };
 	struct_108byte res_dbl;
 
+	cls_struct_type.size = 0;
+	cls_struct_type.alignment = 0;
+	cls_struct_type.type = FFI_TYPE_STRUCT;
+	cls_struct_type.elements = cls_struct_fields;
+
 	cls_struct_fields[0] = &ffi_type_double;
 	cls_struct_fields[1] = &ffi_type_double;
 	cls_struct_fields[2] = &ffi_type_double;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/stret_large2.c b/Modules/_ctypes/libffi/testsuite/libffi.call/stret_large2.c
index e2599d2..d9c750e 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/stret_large2.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/stret_large2.c
@@ -9,8 +9,8 @@
 /* { dg-do run { xfail strongarm*-*-* xscale*-*-*  } } */
 #include "ffitest.h"
 
-// 13 FPRs: 104 bytes
-// 14 FPRs: 112 bytes
+/* 13 FPRs: 104 bytes */
+/* 14 FPRs: 112 bytes */
 
 typedef struct struct_116byte {
 	double a;
@@ -84,17 +84,17 @@
 	ffi_type cls_struct_type;
 	ffi_type* dbl_arg_types[5];
 
-	cls_struct_type.size = 0;
-	cls_struct_type.alignment = 0;
-	cls_struct_type.type = FFI_TYPE_STRUCT;
-	cls_struct_type.elements = cls_struct_fields;
-
 	struct_116byte e_dbl = { 9.0, 2.0, 6.0, 5.0, 3.0, 4.0, 8.0, 1.0, 1.0, 2.0, 3.0, 7.0, 2.0, 5.0, 7 };
 	struct_116byte f_dbl = { 1.0, 2.0, 3.0, 7.0, 2.0, 5.0, 6.0, 7.0, 4.0, 5.0, 7.0, 9.0, 1.0, 6.0, 4 };
 	struct_116byte g_dbl = { 4.0, 5.0, 7.0, 9.0, 1.0, 1.0, 2.0, 9.0, 8.0, 6.0, 1.0, 4.0, 0.0, 7.0, 3 };
 	struct_116byte h_dbl = { 8.0, 6.0, 1.0, 4.0, 0.0, 3.0, 3.0, 1.0, 9.0, 2.0, 6.0, 5.0, 3.0, 8.0, 2 };
 	struct_116byte res_dbl;
 
+	cls_struct_type.size = 0;
+	cls_struct_type.alignment = 0;
+	cls_struct_type.type = FFI_TYPE_STRUCT;
+	cls_struct_type.elements = cls_struct_fields;
+
 	cls_struct_fields[0] = &ffi_type_double;
 	cls_struct_fields[1] = &ffi_type_double;
 	cls_struct_fields[2] = &ffi_type_double;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/stret_medium.c b/Modules/_ctypes/libffi/testsuite/libffi.call/stret_medium.c
index 1fc6a9e..973ee02 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/stret_medium.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/stret_medium.c
@@ -68,17 +68,17 @@
 	ffi_type cls_struct_type;
 	ffi_type* dbl_arg_types[5];
 
-	cls_struct_type.size = 0;
-	cls_struct_type.alignment = 0;
-	cls_struct_type.type = FFI_TYPE_STRUCT;
-	cls_struct_type.elements = cls_struct_fields;
-
 	struct_72byte e_dbl = { 9.0, 2.0, 6.0, 5.0, 3.0, 4.0, 8.0, 1.0, 7.0 };
 	struct_72byte f_dbl = { 1.0, 2.0, 3.0, 7.0, 2.0, 5.0, 6.0, 7.0, 4.0 };
 	struct_72byte g_dbl = { 4.0, 5.0, 7.0, 9.0, 1.0, 1.0, 2.0, 9.0, 3.0 };
 	struct_72byte h_dbl = { 8.0, 6.0, 1.0, 4.0, 0.0, 3.0, 3.0, 1.0, 2.0 };
 	struct_72byte res_dbl;
 
+	cls_struct_type.size = 0;
+	cls_struct_type.alignment = 0;
+	cls_struct_type.type = FFI_TYPE_STRUCT;
+	cls_struct_type.elements = cls_struct_fields;
+
 	cls_struct_fields[0] = &ffi_type_double;
 	cls_struct_fields[1] = &ffi_type_double;
 	cls_struct_fields[2] = &ffi_type_double;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/stret_medium2.c b/Modules/_ctypes/libffi/testsuite/libffi.call/stret_medium2.c
index cb2f2fb..84323d1 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/stret_medium2.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/stret_medium2.c
@@ -69,17 +69,17 @@
 	ffi_type cls_struct_type;
 	ffi_type* dbl_arg_types[5];
 
-	cls_struct_type.size = 0;
-	cls_struct_type.alignment = 0;
-	cls_struct_type.type = FFI_TYPE_STRUCT;
-	cls_struct_type.elements = cls_struct_fields;
-
 	struct_72byte e_dbl = { 9.0, 2.0, 6.0, 5.0, 3.0, 4.0, 8.0, 1.0, 7 };
 	struct_72byte f_dbl = { 1.0, 2.0, 3.0, 7.0, 2.0, 5.0, 6.0, 7.0, 4 };
 	struct_72byte g_dbl = { 4.0, 5.0, 7.0, 9.0, 1.0, 1.0, 2.0, 9.0, 3 };
 	struct_72byte h_dbl = { 8.0, 6.0, 1.0, 4.0, 0.0, 3.0, 3.0, 1.0, 2 };
 	struct_72byte res_dbl;
 
+	cls_struct_type.size = 0;
+	cls_struct_type.alignment = 0;
+	cls_struct_type.type = FFI_TYPE_STRUCT;
+	cls_struct_type.elements = cls_struct_fields;
+
 	cls_struct_fields[0] = &ffi_type_double;
 	cls_struct_fields[1] = &ffi_type_double;
 	cls_struct_fields[2] = &ffi_type_double;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/strlen2_win32.c b/Modules/_ctypes/libffi/testsuite/libffi.call/strlen2_win32.c
new file mode 100644
index 0000000..0d81061
--- /dev/null
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/strlen2_win32.c
@@ -0,0 +1,44 @@
+/* Area:	ffi_call
+   Purpose:	Check fastcall strlen call on X86_WIN32 systems.
+   Limitations:	none.
+   PR:		none.
+   Originator:	From the original ffitest.c  */
+
+/* { dg-do run { target i?86-*-cygwin* i?86-*-mingw* } } */
+
+#include "ffitest.h"
+
+static size_t __FASTCALL__ my_fastcall_strlen(char *s)
+{
+  return (strlen(s));
+}
+
+int main (void)
+{
+  ffi_cif cif;
+  ffi_type *args[MAX_ARGS];
+  void *values[MAX_ARGS];
+  ffi_arg rint;
+  char *s;
+  args[0] = &ffi_type_pointer;
+  values[0] = (void*) &s;
+  
+  /* Initialize the cif */
+  CHECK(ffi_prep_cif(&cif, FFI_FASTCALL, 1,
+		       &ffi_type_sint, args) == FFI_OK);
+  
+  s = "a";
+  ffi_call(&cif, FFI_FN(my_fastcall_strlen), &rint, values);
+  CHECK(rint == 1);
+  
+  s = "1234567";
+  ffi_call(&cif, FFI_FN(my_fastcall_strlen), &rint, values);
+  CHECK(rint == 7);
+  
+  s = "1234567890123456789012345";
+  ffi_call(&cif, FFI_FN(my_fastcall_strlen), &rint, values);
+  CHECK(rint == 25);
+  
+  printf("fastcall strlen tests passed\n");
+  exit(0);
+}
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/struct1.c b/Modules/_ctypes/libffi/testsuite/libffi.call/struct1.c
index ea76c85..bfc23f6 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/struct1.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/struct1.c
@@ -30,6 +30,13 @@
   void *values[MAX_ARGS];
   ffi_type ts1_type;
   ffi_type *ts1_type_elements[4];
+
+  test_structure_1 ts1_arg;
+
+  /* This is a hack to get a properly aligned result buffer */
+  test_structure_1 *ts1_result =
+    (test_structure_1 *) malloc (sizeof(test_structure_1));
+
   ts1_type.size = 0;
   ts1_type.alignment = 0;
   ts1_type.type = FFI_TYPE_STRUCT;
@@ -39,11 +46,6 @@
   ts1_type_elements[2] = &ffi_type_uint;
   ts1_type_elements[3] = NULL;
   
-  test_structure_1 ts1_arg;
-  /* This is a hack to get a properly aligned result buffer */
-  test_structure_1 *ts1_result = 
-    (test_structure_1 *) malloc (sizeof(test_structure_1));
-  
   args[0] = &ts1_type;
   values[0] = &ts1_arg;
   
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/struct1_win32.c b/Modules/_ctypes/libffi/testsuite/libffi.call/struct1_win32.c
new file mode 100644
index 0000000..b756f5a
--- /dev/null
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/struct1_win32.c
@@ -0,0 +1,67 @@
+/* Area:	ffi_call
+   Purpose:	Check structures with fastcall/thiscall convention.
+   Limitations:	none.
+   PR:		none.
+   Originator:	From the original ffitest.c  */
+
+/* { dg-do run { target i?86-*-cygwin* i?86-*-mingw* } } */
+#include "ffitest.h"
+
+typedef struct
+{
+  unsigned char uc;
+  double d;
+  unsigned int ui;
+} test_structure_1;
+
+static test_structure_1 __FASTCALL__ struct1(test_structure_1 ts)
+{
+  ts.uc++;
+  ts.d--;
+  ts.ui++;
+
+  return ts;
+}
+
+int main (void)
+{
+  ffi_cif cif;
+  ffi_type *args[MAX_ARGS];
+  void *values[MAX_ARGS];
+  ffi_type ts1_type;
+  ffi_type *ts1_type_elements[4];
+
+  test_structure_1 ts1_arg;
+
+  /* This is a hack to get a properly aligned result buffer */
+  test_structure_1 *ts1_result =
+    (test_structure_1 *) malloc (sizeof(test_structure_1));
+
+  ts1_type.size = 0;
+  ts1_type.alignment = 0;
+  ts1_type.type = FFI_TYPE_STRUCT;
+  ts1_type.elements = ts1_type_elements;
+  ts1_type_elements[0] = &ffi_type_uchar;
+  ts1_type_elements[1] = &ffi_type_double;
+  ts1_type_elements[2] = &ffi_type_uint;
+  ts1_type_elements[3] = NULL;
+  
+  args[0] = &ts1_type;
+  values[0] = &ts1_arg;
+  
+  /* Initialize the cif */
+  CHECK(ffi_prep_cif(&cif, FFI_FASTCALL, 1, 
+		     &ts1_type, args) == FFI_OK);
+  
+  ts1_arg.uc = '\x01';
+  ts1_arg.d = 3.14159;
+  ts1_arg.ui = 555;
+
+  ffi_call(&cif, FFI_FN(struct1), ts1_result, values);
+  
+  CHECK(ts1_result->ui == 556);
+  CHECK(ts1_result->d == 3.14159 - 1);
+ 
+  free (ts1_result);
+  exit(0);
+}
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/struct2.c b/Modules/_ctypes/libffi/testsuite/libffi.call/struct2.c
index 14bc9fd..d85385e 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/struct2.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/struct2.c
@@ -29,6 +29,11 @@
   test_structure_2 ts2_arg;
   ffi_type ts2_type;
   ffi_type *ts2_type_elements[3];
+
+  /* This is a hack to get a properly aligned result buffer */
+  test_structure_2 *ts2_result =
+    (test_structure_2 *) malloc (sizeof(test_structure_2));
+
   ts2_type.size = 0;
   ts2_type.alignment = 0;
   ts2_type.type = FFI_TYPE_STRUCT;
@@ -37,11 +42,6 @@
   ts2_type_elements[1] = &ffi_type_double;
   ts2_type_elements[2] = NULL;
 
-  
-  /* This is a hack to get a properly aligned result buffer */
-  test_structure_2 *ts2_result = 
-    (test_structure_2 *) malloc (sizeof(test_structure_2));
-  
   args[0] = &ts2_type;
   values[0] = &ts2_arg;
   
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/struct2_win32.c b/Modules/_ctypes/libffi/testsuite/libffi.call/struct2_win32.c
new file mode 100644
index 0000000..5d02285
--- /dev/null
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/struct2_win32.c
@@ -0,0 +1,67 @@
+/* Area:	ffi_call
+   Purpose:	Check structures in fastcall/stdcall function
+   Limitations:	none.
+   PR:		none.
+   Originator:	From the original ffitest.c  */
+
+/* { dg-do run { target i?86-*-cygwin* i?86-*-mingw* } } */
+#include "ffitest.h"
+
+typedef struct
+{
+  double d1;
+  double d2;
+} test_structure_2;
+
+static test_structure_2 __FASTCALL__ struct2(test_structure_2 ts)
+{
+  ts.d1--;
+  ts.d2--;
+
+  return ts;
+}
+
+int main (void)
+{
+  ffi_cif cif;
+  ffi_type *args[MAX_ARGS];
+  void *values[MAX_ARGS];
+  test_structure_2 ts2_arg;
+  ffi_type ts2_type;
+  ffi_type *ts2_type_elements[3];
+
+  /* This is a hack to get a properly aligned result buffer */
+  test_structure_2 *ts2_result =
+    (test_structure_2 *) malloc (sizeof(test_structure_2));
+
+  ts2_type.size = 0;
+  ts2_type.alignment = 0;
+  ts2_type.type = FFI_TYPE_STRUCT;
+  ts2_type.elements = ts2_type_elements;
+  ts2_type_elements[0] = &ffi_type_double;
+  ts2_type_elements[1] = &ffi_type_double;
+  ts2_type_elements[2] = NULL;
+
+  args[0] = &ts2_type;
+  values[0] = &ts2_arg;
+  
+  /* Initialize the cif */
+  CHECK(ffi_prep_cif(&cif, FFI_FASTCALL, 1, &ts2_type, args) == FFI_OK);
+  
+  ts2_arg.d1 = 5.55;
+  ts2_arg.d2 = 6.66;
+  
+  printf ("%g\n", ts2_arg.d1);
+  printf ("%g\n", ts2_arg.d2);
+  
+  ffi_call(&cif, FFI_FN(struct2), ts2_result, values);
+  
+  printf ("%g\n", ts2_result->d1);
+  printf ("%g\n", ts2_result->d2);
+  
+  CHECK(ts2_result->d1 == 5.55 - 1);
+  CHECK(ts2_result->d2 == 6.66 - 1);
+  
+  free (ts2_result);
+  exit(0);
+}
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/struct3.c b/Modules/_ctypes/libffi/testsuite/libffi.call/struct3.c
index e0bb09b..de883c2 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/struct3.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/struct3.c
@@ -27,6 +27,11 @@
   int compare_value;
   ffi_type ts3_type;
   ffi_type *ts3_type_elements[2];
+
+  test_structure_3 ts3_arg;
+  test_structure_3 *ts3_result =
+    (test_structure_3 *) malloc (sizeof(test_structure_3));
+
   ts3_type.size = 0;
   ts3_type.alignment = 0;
   ts3_type.type = FFI_TYPE_STRUCT;
@@ -34,10 +39,6 @@
   ts3_type_elements[0] = &ffi_type_sint;
   ts3_type_elements[1] = NULL;
 
-  test_structure_3 ts3_arg;
-  test_structure_3 *ts3_result = 
-    (test_structure_3 *) malloc (sizeof(test_structure_3));
-  
   args[0] = &ts3_type;
   values[0] = &ts3_arg;
   
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/struct4.c b/Modules/_ctypes/libffi/testsuite/libffi.call/struct4.c
index 0ad0a83..48e0349 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/struct4.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/struct4.c
@@ -28,21 +28,22 @@
   void *values[MAX_ARGS];
   ffi_type ts4_type;
   ffi_type *ts4_type_elements[4];  
+
+  test_structure_4 ts4_arg;
+
+  /* This is a hack to get a properly aligned result buffer */
+  test_structure_4 *ts4_result =
+    (test_structure_4 *) malloc (sizeof(test_structure_4));
+
   ts4_type.size = 0;
   ts4_type.alignment = 0;
   ts4_type.type = FFI_TYPE_STRUCT;
-  test_structure_4 ts4_arg;
   ts4_type.elements = ts4_type_elements;
   ts4_type_elements[0] = &ffi_type_uint;
   ts4_type_elements[1] = &ffi_type_uint;
   ts4_type_elements[2] = &ffi_type_uint;
   ts4_type_elements[3] = NULL;
 
-  
-  /* This is a hack to get a properly aligned result buffer */
-  test_structure_4 *ts4_result = 
-    (test_structure_4 *) malloc (sizeof(test_structure_4));
-  
   args[0] = &ts4_type;
   values[0] = &ts4_arg;
   
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/struct5.c b/Modules/_ctypes/libffi/testsuite/libffi.call/struct5.c
index c03cc97..28b1f0c 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/struct5.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/struct5.c
@@ -27,6 +27,13 @@
   void *values[MAX_ARGS];
   ffi_type ts5_type;
   ffi_type *ts5_type_elements[3];
+
+  test_structure_5 ts5_arg1, ts5_arg2;
+
+  /* This is a hack to get a properly aligned result buffer */
+  test_structure_5 *ts5_result =
+    (test_structure_5 *) malloc (sizeof(test_structure_5));
+
   ts5_type.size = 0;
   ts5_type.alignment = 0;
   ts5_type.type = FFI_TYPE_STRUCT;
@@ -35,12 +42,6 @@
   ts5_type_elements[1] = &ffi_type_schar;
   ts5_type_elements[2] = NULL;
 
-  test_structure_5 ts5_arg1, ts5_arg2;
-  
-  /* This is a hack to get a properly aligned result buffer */
-  test_structure_5 *ts5_result = 
-    (test_structure_5 *) malloc (sizeof(test_structure_5));
-  
   args[0] = &ts5_type;
   args[1] = &ts5_type;
   values[0] = &ts5_arg1;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/struct6.c b/Modules/_ctypes/libffi/testsuite/libffi.call/struct6.c
index 83db9af..0e26746 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/struct6.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/struct6.c
@@ -27,6 +27,13 @@
   void *values[MAX_ARGS];
   ffi_type ts6_type;
   ffi_type *ts6_type_elements[3];
+
+  test_structure_6 ts6_arg;
+
+  /* This is a hack to get a properly aligned result buffer */
+  test_structure_6 *ts6_result =
+    (test_structure_6 *) malloc (sizeof(test_structure_6));
+
   ts6_type.size = 0;
   ts6_type.alignment = 0;
   ts6_type.type = FFI_TYPE_STRUCT;
@@ -35,13 +42,6 @@
   ts6_type_elements[1] = &ffi_type_double;
   ts6_type_elements[2] = NULL;
 
-
-  test_structure_6 ts6_arg;
-
-  /* This is a hack to get a properly aligned result buffer */
-  test_structure_6 *ts6_result = 
-    (test_structure_6 *) malloc (sizeof(test_structure_6));
-  
   args[0] = &ts6_type;
   values[0] = &ts6_arg;
 
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/struct7.c b/Modules/_ctypes/libffi/testsuite/libffi.call/struct7.c
index 58aac4c..8f2bbfd 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/struct7.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/struct7.c
@@ -29,6 +29,13 @@
   void *values[MAX_ARGS];
   ffi_type ts7_type;
   ffi_type *ts7_type_elements[4];
+
+  test_structure_7 ts7_arg;
+
+  /* This is a hack to get a properly aligned result buffer */
+  test_structure_7 *ts7_result =
+    (test_structure_7 *) malloc (sizeof(test_structure_7));
+
   ts7_type.size = 0;
   ts7_type.alignment = 0;
   ts7_type.type = FFI_TYPE_STRUCT;
@@ -38,13 +45,6 @@
   ts7_type_elements[2] = &ffi_type_double;
   ts7_type_elements[3] = NULL;
 
-
-  test_structure_7 ts7_arg;
-  
-  /* This is a hack to get a properly aligned result buffer */
-  test_structure_7 *ts7_result = 
-    (test_structure_7 *) malloc (sizeof(test_structure_7));
-  
   args[0] = &ts7_type;
   values[0] = &ts7_arg;
   
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/struct8.c b/Modules/_ctypes/libffi/testsuite/libffi.call/struct8.c
index c773ac7..266e1f0 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/struct8.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/struct8.c
@@ -31,6 +31,13 @@
   void *values[MAX_ARGS];
   ffi_type ts8_type;
   ffi_type *ts8_type_elements[5];
+
+  test_structure_8 ts8_arg;
+
+  /* This is a hack to get a properly aligned result buffer */
+  test_structure_8 *ts8_result =
+    (test_structure_8 *) malloc (sizeof(test_structure_8));
+
   ts8_type.size = 0;
   ts8_type.alignment = 0;
   ts8_type.type = FFI_TYPE_STRUCT;
@@ -41,12 +48,6 @@
   ts8_type_elements[3] = &ffi_type_float;
   ts8_type_elements[4] = NULL;
 
-  test_structure_8 ts8_arg;
-  
-  /* This is a hack to get a properly aligned result buffer */
-  test_structure_8 *ts8_result = 
-    (test_structure_8 *) malloc (sizeof(test_structure_8));
-  
   args[0] = &ts8_type;
   values[0] = &ts8_arg;
   
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/struct9.c b/Modules/_ctypes/libffi/testsuite/libffi.call/struct9.c
index f30091f..efeb716 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/struct9.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/struct9.c
@@ -28,6 +28,13 @@
   void *values[MAX_ARGS];
   ffi_type ts9_type;
   ffi_type *ts9_type_elements[3];
+
+  test_structure_9 ts9_arg;
+
+  /* This is a hack to get a properly aligned result buffer */
+  test_structure_9 *ts9_result =
+    (test_structure_9 *) malloc (sizeof(test_structure_9));
+
   ts9_type.size = 0;
   ts9_type.alignment = 0;
   ts9_type.type = FFI_TYPE_STRUCT;
@@ -36,12 +43,6 @@
   ts9_type_elements[1] = &ffi_type_sint;
   ts9_type_elements[2] = NULL;
 
-  test_structure_9 ts9_arg;
-  
-  /* This is a hack to get a properly aligned result buffer */
-  test_structure_9 *ts9_result = 
-    (test_structure_9 *) malloc (sizeof(test_structure_9));
-  
   args[0] = &ts9_type;
   values[0] = &ts9_arg;
   
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/testclosure.c b/Modules/_ctypes/libffi/testsuite/libffi.call/testclosure.c
index 161cc89..ca31056 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.call/testclosure.c
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/testclosure.c
@@ -43,13 +43,13 @@
   ffi_type cls_struct_type0;
   ffi_type* dbl_arg_types[5];
 
+  struct cls_struct_combined g_dbl = {4.0, 5.0, 1.0, 8.0};
+
   cls_struct_type0.size = 0;
   cls_struct_type0.alignment = 0;
   cls_struct_type0.type = FFI_TYPE_STRUCT;
   cls_struct_type0.elements = cls_struct_fields0;
 
-  struct cls_struct_combined g_dbl = {4.0, 5.0, 1.0, 8.0};
-
   cls_struct_fields0[0] = &ffi_type_float;
   cls_struct_fields0[1] = &ffi_type_float;
   cls_struct_fields0[2] = &ffi_type_float;
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/uninitialized.c b/Modules/_ctypes/libffi/testsuite/libffi.call/uninitialized.c
new file mode 100644
index 0000000..f00d830
--- /dev/null
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/uninitialized.c
@@ -0,0 +1,61 @@
+/* { dg-do run } */
+#include "ffitest.h"
+
+typedef struct
+{
+  unsigned char uc;
+  double d;
+  unsigned int ui;
+} test_structure_1;
+
+static test_structure_1 struct1(test_structure_1 ts)
+{
+  ts.uc++;
+  ts.d--;
+  ts.ui++;
+
+  return ts;
+}
+
+int main (void)
+{
+  ffi_cif cif;
+  ffi_type *args[MAX_ARGS];
+  void *values[MAX_ARGS];
+  ffi_type ts1_type;
+  ffi_type *ts1_type_elements[4];
+
+  memset(&cif, 1, sizeof(cif));
+  ts1_type.size = 0;
+  ts1_type.alignment = 0;
+  ts1_type.type = FFI_TYPE_STRUCT;
+  ts1_type.elements = ts1_type_elements;
+  ts1_type_elements[0] = &ffi_type_uchar;
+  ts1_type_elements[1] = &ffi_type_double;
+  ts1_type_elements[2] = &ffi_type_uint;
+  ts1_type_elements[3] = NULL;
+
+  test_structure_1 ts1_arg;
+  /* This is a hack to get a properly aligned result buffer */
+  test_structure_1 *ts1_result =
+    (test_structure_1 *) malloc (sizeof(test_structure_1));
+
+  args[0] = &ts1_type;
+  values[0] = &ts1_arg;
+
+  /* Initialize the cif */
+  CHECK(ffi_prep_cif(&cif, FFI_DEFAULT_ABI, 1,
+		     &ts1_type, args) == FFI_OK);
+
+  ts1_arg.uc = '\x01';
+  ts1_arg.d = 3.14159;
+  ts1_arg.ui = 555;
+
+  ffi_call(&cif, FFI_FN(struct1), ts1_result, values);
+
+  CHECK(ts1_result->ui == 556);
+  CHECK(ts1_result->d == 3.14159 - 1);
+
+  free (ts1_result);
+  exit(0);
+}
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/va_1.c b/Modules/_ctypes/libffi/testsuite/libffi.call/va_1.c
new file mode 100644
index 0000000..cf4dd85
--- /dev/null
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/va_1.c
@@ -0,0 +1,196 @@
+/* Area:		ffi_call
+   Purpose:		Test passing struct in variable argument lists.
+   Limitations:	none.
+   PR:			none.
+   Originator:	        ARM Ltd. */
+
+/* { dg-do run } */
+/* { dg-output "" { xfail avr32*-*-* } } */
+
+#include "ffitest.h"
+#include <stdarg.h>
+
+struct small_tag
+{
+  unsigned char a;
+  unsigned char b;
+};
+
+struct large_tag
+{
+  unsigned a;
+  unsigned b;
+  unsigned c;
+  unsigned d;
+  unsigned e;
+};
+
+static int
+test_fn (int n, ...)
+{
+  va_list ap;
+  struct small_tag s1;
+  struct small_tag s2;
+  struct large_tag l;
+  unsigned char uc;
+  signed char sc;
+  unsigned short us;
+  signed short ss;
+  unsigned int ui;
+  signed int si;
+  unsigned long ul;
+  signed long sl;
+  float f;
+  double d;
+
+  va_start (ap, n);
+  s1 = va_arg (ap, struct small_tag);
+  l = va_arg (ap, struct large_tag);
+  s2 = va_arg (ap, struct small_tag);
+
+  uc = va_arg (ap, unsigned);
+  sc = va_arg (ap, signed);
+
+  us = va_arg (ap, unsigned);
+  ss = va_arg (ap, signed);
+
+  ui = va_arg (ap, unsigned int);
+  si = va_arg (ap, signed int);
+
+  ul = va_arg (ap, unsigned long);
+  sl = va_arg (ap, signed long);
+
+  f = va_arg (ap, double);	/* C standard promotes float->double
+				   when anonymous */
+  d = va_arg (ap, double);
+
+  printf ("%u %u %u %u %u %u %u %u %u uc=%u sc=%d %u %d %u %d %lu %ld %f %f\n",
+	  s1.a, s1.b, l.a, l.b, l.c, l.d, l.e,
+	  s2.a, s2.b,
+	  uc, sc,
+	  us, ss,
+	  ui, si,
+	  ul, sl,
+	  f, d);
+  va_end (ap);
+  return n + 1;
+}
+
+int
+main (void)
+{
+  ffi_cif cif;
+  void* args[15];
+  ffi_type* arg_types[15];
+
+  ffi_type s_type;
+  ffi_type *s_type_elements[3];
+
+  ffi_type l_type;
+  ffi_type *l_type_elements[6];
+
+  struct small_tag s1;
+  struct small_tag s2;
+  struct large_tag l1;
+
+  int n;
+  int res;
+
+  unsigned char uc;
+  signed char sc;
+  unsigned short us;
+  signed short ss;
+  unsigned int ui;
+  signed int si;
+  unsigned long ul;
+  signed long sl;
+  double d1;
+  double f1;
+
+  s_type.size = 0;
+  s_type.alignment = 0;
+  s_type.type = FFI_TYPE_STRUCT;
+  s_type.elements = s_type_elements;
+
+  s_type_elements[0] = &ffi_type_uchar;
+  s_type_elements[1] = &ffi_type_uchar;
+  s_type_elements[2] = NULL;
+
+  l_type.size = 0;
+  l_type.alignment = 0;
+  l_type.type = FFI_TYPE_STRUCT;
+  l_type.elements = l_type_elements;
+
+  l_type_elements[0] = &ffi_type_uint;
+  l_type_elements[1] = &ffi_type_uint;
+  l_type_elements[2] = &ffi_type_uint;
+  l_type_elements[3] = &ffi_type_uint;
+  l_type_elements[4] = &ffi_type_uint;
+  l_type_elements[5] = NULL;
+
+  arg_types[0] = &ffi_type_sint;
+  arg_types[1] = &s_type;
+  arg_types[2] = &l_type;
+  arg_types[3] = &s_type;
+  arg_types[4] = &ffi_type_uchar;
+  arg_types[5] = &ffi_type_schar;
+  arg_types[6] = &ffi_type_ushort;
+  arg_types[7] = &ffi_type_sshort;
+  arg_types[8] = &ffi_type_uint;
+  arg_types[9] = &ffi_type_sint;
+  arg_types[10] = &ffi_type_ulong;
+  arg_types[11] = &ffi_type_slong;
+  arg_types[12] = &ffi_type_double;
+  arg_types[13] = &ffi_type_double;
+  arg_types[14] = NULL;
+
+  CHECK(ffi_prep_cif_var(&cif, FFI_DEFAULT_ABI, 1, 14, &ffi_type_sint, arg_types) == FFI_OK);
+
+  s1.a = 5;
+  s1.b = 6;
+
+  l1.a = 10;
+  l1.b = 11;
+  l1.c = 12;
+  l1.d = 13;
+  l1.e = 14;
+
+  s2.a = 7;
+  s2.b = 8;
+
+  n = 41;
+
+  uc = 9;
+  sc = 10;
+  us = 11;
+  ss = 12;
+  ui = 13;
+  si = 14;
+  ul = 15;
+  sl = 16;
+  f1 = 2.12;
+  d1 = 3.13;
+
+  args[0] = &n;
+  args[1] = &s1;
+  args[2] = &l1;
+  args[3] = &s2;
+  args[4] = &uc;
+  args[5] = &sc;
+  args[6] = &us;
+  args[7] = &ss;
+  args[8] = &ui;
+  args[9] = &si;
+  args[10] = &ul;
+  args[11] = &sl;
+  args[12] = &f1;
+  args[13] = &d1;
+  args[14] = NULL;
+
+  ffi_call(&cif, FFI_FN(test_fn), &res, args);
+  /* { dg-output "5 6 10 11 12 13 14 7 8 uc=9 sc=10 11 12 13 14 15 16 2.120000 3.130000" } */
+  printf("res: %d\n", (int) res);
+  /* { dg-output "\nres: 42" } */
+
+  return 0;
+}
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/va_struct1.c b/Modules/_ctypes/libffi/testsuite/libffi.call/va_struct1.c
new file mode 100644
index 0000000..11d1f10
--- /dev/null
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/va_struct1.c
@@ -0,0 +1,121 @@
+/* Area:		ffi_call
+   Purpose:		Test passing struct in variable argument lists.
+   Limitations:	none.
+   PR:			none.
+   Originator: ARM Ltd. */
+
+/* { dg-do run } */
+/* { dg-output "" { xfail avr32*-*-* } } */
+
+#include "ffitest.h"
+#include <stdarg.h>
+
+struct small_tag
+{
+  unsigned char a;
+  unsigned char b;
+};
+
+struct large_tag
+{
+  unsigned a;
+  unsigned b;
+  unsigned c;
+  unsigned d;
+  unsigned e;
+};
+
+static int
+test_fn (int n, ...)
+{
+  va_list ap;
+  struct small_tag s1;
+  struct small_tag s2;
+  struct large_tag l;
+
+  va_start (ap, n);
+  s1 = va_arg (ap, struct small_tag);
+  l = va_arg (ap, struct large_tag);
+  s2 = va_arg (ap, struct small_tag);
+  printf ("%u %u %u %u %u %u %u %u %u\n", s1.a, s1.b, l.a, l.b, l.c, l.d, l.e,
+	  s2.a, s2.b);
+  va_end (ap);
+  return n + 1;
+}
+
+int
+main (void)
+{
+  ffi_cif cif;
+  void* args[5];
+  ffi_type* arg_types[5];
+
+  ffi_type s_type;
+  ffi_type *s_type_elements[3];
+
+  ffi_type l_type;
+  ffi_type *l_type_elements[6];
+
+  struct small_tag s1;
+  struct small_tag s2;
+  struct large_tag l1;
+
+  int n;
+  int res;
+
+  s_type.size = 0;
+  s_type.alignment = 0;
+  s_type.type = FFI_TYPE_STRUCT;
+  s_type.elements = s_type_elements;
+
+  s_type_elements[0] = &ffi_type_uchar;
+  s_type_elements[1] = &ffi_type_uchar;
+  s_type_elements[2] = NULL;
+
+  l_type.size = 0;
+  l_type.alignment = 0;
+  l_type.type = FFI_TYPE_STRUCT;
+  l_type.elements = l_type_elements;
+
+  l_type_elements[0] = &ffi_type_uint;
+  l_type_elements[1] = &ffi_type_uint;
+  l_type_elements[2] = &ffi_type_uint;
+  l_type_elements[3] = &ffi_type_uint;
+  l_type_elements[4] = &ffi_type_uint;
+  l_type_elements[5] = NULL;
+
+  arg_types[0] = &ffi_type_sint;
+  arg_types[1] = &s_type;
+  arg_types[2] = &l_type;
+  arg_types[3] = &s_type;
+  arg_types[4] = NULL;
+
+  CHECK(ffi_prep_cif_var(&cif, FFI_DEFAULT_ABI, 1, 4, &ffi_type_sint, arg_types) == FFI_OK);
+
+  s1.a = 5;
+  s1.b = 6;
+
+  l1.a = 10;
+  l1.b = 11;
+  l1.c = 12;
+  l1.d = 13;
+  l1.e = 14;
+
+  s2.a = 7;
+  s2.b = 8;
+
+  n = 41;
+
+  args[0] = &n;
+  args[1] = &s1;
+  args[2] = &l1;
+  args[3] = &s2;
+  args[4] = NULL;
+
+  ffi_call(&cif, FFI_FN(test_fn), &res, args);
+  /* { dg-output "5 6 10 11 12 13 14 7 8" } */
+  printf("res: %d\n", (int) res);
+  /* { dg-output "\nres: 42" } */
+
+  return 0;
+}
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/va_struct2.c b/Modules/_ctypes/libffi/testsuite/libffi.call/va_struct2.c
new file mode 100644
index 0000000..56f5b9c
--- /dev/null
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/va_struct2.c
@@ -0,0 +1,123 @@
+/* Area:		ffi_call
+   Purpose:		Test passing struct in variable argument lists.
+   Limitations:	none.
+   PR:			none.
+   Originator: ARM Ltd. */
+
+/* { dg-do run } */
+/* { dg-output "" { xfail avr32*-*-* } } */
+
+#include "ffitest.h"
+#include <stdarg.h>
+
+struct small_tag
+{
+  unsigned char a;
+  unsigned char b;
+};
+
+struct large_tag
+{
+  unsigned a;
+  unsigned b;
+  unsigned c;
+  unsigned d;
+  unsigned e;
+};
+
+static struct small_tag
+test_fn (int n, ...)
+{
+  va_list ap;
+  struct small_tag s1;
+  struct small_tag s2;
+  struct large_tag l;
+
+  va_start (ap, n);
+  s1 = va_arg (ap, struct small_tag);
+  l = va_arg (ap, struct large_tag);
+  s2 = va_arg (ap, struct small_tag);
+  printf ("%u %u %u %u %u %u %u %u %u\n", s1.a, s1.b, l.a, l.b, l.c, l.d, l.e,
+	  s2.a, s2.b);
+  va_end (ap);
+  s1.a += s2.a;
+  s1.b += s2.b;
+  return s1;
+}
+
+int
+main (void)
+{
+  ffi_cif cif;
+  void* args[5];
+  ffi_type* arg_types[5];
+
+  ffi_type s_type;
+  ffi_type *s_type_elements[3];
+
+  ffi_type l_type;
+  ffi_type *l_type_elements[6];
+
+  struct small_tag s1;
+  struct small_tag s2;
+  struct large_tag l1;
+
+  int n;
+  struct small_tag res;
+
+  s_type.size = 0;
+  s_type.alignment = 0;
+  s_type.type = FFI_TYPE_STRUCT;
+  s_type.elements = s_type_elements;
+
+  s_type_elements[0] = &ffi_type_uchar;
+  s_type_elements[1] = &ffi_type_uchar;
+  s_type_elements[2] = NULL;
+
+  l_type.size = 0;
+  l_type.alignment = 0;
+  l_type.type = FFI_TYPE_STRUCT;
+  l_type.elements = l_type_elements;
+
+  l_type_elements[0] = &ffi_type_uint;
+  l_type_elements[1] = &ffi_type_uint;
+  l_type_elements[2] = &ffi_type_uint;
+  l_type_elements[3] = &ffi_type_uint;
+  l_type_elements[4] = &ffi_type_uint;
+  l_type_elements[5] = NULL;
+
+  arg_types[0] = &ffi_type_sint;
+  arg_types[1] = &s_type;
+  arg_types[2] = &l_type;
+  arg_types[3] = &s_type;
+  arg_types[4] = NULL;
+
+  CHECK(ffi_prep_cif_var(&cif, FFI_DEFAULT_ABI, 1, 4, &s_type, arg_types) == FFI_OK);
+
+  s1.a = 5;
+  s1.b = 6;
+
+  l1.a = 10;
+  l1.b = 11;
+  l1.c = 12;
+  l1.d = 13;
+  l1.e = 14;
+
+  s2.a = 7;
+  s2.b = 8;
+
+  n = 41;
+
+  args[0] = &n;
+  args[1] = &s1;
+  args[2] = &l1;
+  args[3] = &s2;
+  args[4] = NULL;
+
+  ffi_call(&cif, FFI_FN(test_fn), &res, args);
+  /* { dg-output "5 6 10 11 12 13 14 7 8" } */
+  printf("res: %d %d\n", res.a, res.b);
+  /* { dg-output "\nres: 12 14" } */
+
+  return 0;
+}
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.call/va_struct3.c b/Modules/_ctypes/libffi/testsuite/libffi.call/va_struct3.c
new file mode 100644
index 0000000..9a27e7f
--- /dev/null
+++ b/Modules/_ctypes/libffi/testsuite/libffi.call/va_struct3.c
@@ -0,0 +1,125 @@
+/* Area:		ffi_call
+   Purpose:		Test passing struct in variable argument lists.
+   Limitations:	none.
+   PR:			none.
+   Originator:	ARM Ltd. */
+
+/* { dg-do run } */
+/* { dg-output "" { xfail avr32*-*-* } } */
+
+#include "ffitest.h"
+#include <stdarg.h>
+
+struct small_tag
+{
+  unsigned char a;
+  unsigned char b;
+};
+
+struct large_tag
+{
+  unsigned a;
+  unsigned b;
+  unsigned c;
+  unsigned d;
+  unsigned e;
+};
+
+static struct large_tag
+test_fn (int n, ...)
+{
+  va_list ap;
+  struct small_tag s1;
+  struct small_tag s2;
+  struct large_tag l;
+
+  va_start (ap, n);
+  s1 = va_arg (ap, struct small_tag);
+  l = va_arg (ap, struct large_tag);
+  s2 = va_arg (ap, struct small_tag);
+  printf ("%u %u %u %u %u %u %u %u %u\n", s1.a, s1.b, l.a, l.b, l.c, l.d, l.e,
+	  s2.a, s2.b);
+  va_end (ap);
+  l.a += s1.a;
+  l.b += s1.b;
+  l.c += s2.a;
+  l.d += s2.b;
+  return l;
+}
+
+int
+main (void)
+{
+  ffi_cif cif;
+  void* args[5];
+  ffi_type* arg_types[5];
+
+  ffi_type s_type;
+  ffi_type *s_type_elements[3];
+
+  ffi_type l_type;
+  ffi_type *l_type_elements[6];
+
+  struct small_tag s1;
+  struct small_tag s2;
+  struct large_tag l1;
+
+  int n;
+  struct large_tag res;
+
+  s_type.size = 0;
+  s_type.alignment = 0;
+  s_type.type = FFI_TYPE_STRUCT;
+  s_type.elements = s_type_elements;
+
+  s_type_elements[0] = &ffi_type_uchar;
+  s_type_elements[1] = &ffi_type_uchar;
+  s_type_elements[2] = NULL;
+
+  l_type.size = 0;
+  l_type.alignment = 0;
+  l_type.type = FFI_TYPE_STRUCT;
+  l_type.elements = l_type_elements;
+
+  l_type_elements[0] = &ffi_type_uint;
+  l_type_elements[1] = &ffi_type_uint;
+  l_type_elements[2] = &ffi_type_uint;
+  l_type_elements[3] = &ffi_type_uint;
+  l_type_elements[4] = &ffi_type_uint;
+  l_type_elements[5] = NULL;
+
+  arg_types[0] = &ffi_type_sint;
+  arg_types[1] = &s_type;
+  arg_types[2] = &l_type;
+  arg_types[3] = &s_type;
+  arg_types[4] = NULL;
+
+  CHECK(ffi_prep_cif_var(&cif, FFI_DEFAULT_ABI, 1, 4, &l_type, arg_types) == FFI_OK);
+
+  s1.a = 5;
+  s1.b = 6;
+
+  l1.a = 10;
+  l1.b = 11;
+  l1.c = 12;
+  l1.d = 13;
+  l1.e = 14;
+
+  s2.a = 7;
+  s2.b = 8;
+
+  n = 41;
+
+  args[0] = &n;
+  args[1] = &s1;
+  args[2] = &l1;
+  args[3] = &s2;
+  args[4] = NULL;
+
+  ffi_call(&cif, FFI_FN(test_fn), &res, args);
+  /* { dg-output "5 6 10 11 12 13 14 7 8" } */
+  printf("res: %d %d %d %d %d\n", res.a, res.b, res.c, res.d, res.e);
+  /* { dg-output "\nres: 15 17 19 21 14" } */
+
+  return 0;
+}
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.special/ffitestcxx.h b/Modules/_ctypes/libffi/testsuite/libffi.special/ffitestcxx.h
index 83f5442..c6da7ef 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.special/ffitestcxx.h
+++ b/Modules/_ctypes/libffi/testsuite/libffi.special/ffitestcxx.h
@@ -53,44 +53,3 @@
 #define PRIuLL "llu"
 #endif
 
-#ifdef USING_MMAP
-static inline void *
-allocate_mmap (size_t size)
-{
-  void *page;
-#if defined (HAVE_MMAP_DEV_ZERO)
-  static int dev_zero_fd = -1;
-#endif
-
-#ifdef HAVE_MMAP_DEV_ZERO
-  if (dev_zero_fd == -1)
-    {
-      dev_zero_fd = open ("/dev/zero", O_RDONLY);
-      if (dev_zero_fd == -1)
-	{
-	  perror ("open /dev/zero: %m");
-	  exit (1);
-	}
-    }
-#endif
-
-
-#ifdef HAVE_MMAP_ANON
-  page = mmap (NULL, size, PROT_READ | PROT_WRITE | PROT_EXEC,
-	       MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
-#endif
-#ifdef HAVE_MMAP_DEV_ZERO
-  page = mmap (NULL, size, PROT_READ | PROT_WRITE | PROT_EXEC,
-	       MAP_PRIVATE, dev_zero_fd, 0);
-#endif
-
-  if (page == (char *) MAP_FAILED)
-    {
-      perror ("virtual memory exhausted");
-      exit (1);
-    }
-
-  return page;
-}
-
-#endif
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.special/special.exp b/Modules/_ctypes/libffi/testsuite/libffi.special/special.exp
index e167e86..f1a5fa6 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.special/special.exp
+++ b/Modules/_ctypes/libffi/testsuite/libffi.special/special.exp
@@ -1,4 +1,4 @@
-# Copyright (C) 2003, 2006, 2009 Free Software Foundation, Inc.
+# Copyright (C) 2003, 2006, 2009, 2010 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -14,8 +14,6 @@
 # along with this program; see the file COPYING3.  If not see
 # <http://www.gnu.org/licenses/>.
 
-load_lib libffi-dg.exp
-
 dg-init
 libffi-init
 
@@ -25,10 +23,14 @@
 
 set cxx_options " -shared-libgcc -lstdc++"
 
-dg-runtest [lsort [glob -nocomplain $srcdir/$subdir/*.cc]] $cxx_options "-O0 -W -Wall"
-dg-runtest [lsort [glob -nocomplain $srcdir/$subdir/*.cc]] $cxx_options "-O2"
-dg-runtest [lsort [glob -nocomplain $srcdir/$subdir/*.cc]] $cxx_options "-O3"
-dg-runtest [lsort [glob -nocomplain $srcdir/$subdir/*.cc]] $cxx_options "-Os"
+if { [string match $using_gcc "yes"] } {
+
+  dg-runtest [lsort [glob -nocomplain $srcdir/$subdir/*.cc]] $cxx_options "-O0 -W -Wall"
+  dg-runtest [lsort [glob -nocomplain $srcdir/$subdir/*.cc]] $cxx_options "-O2"
+  dg-runtest [lsort [glob -nocomplain $srcdir/$subdir/*.cc]] $cxx_options "-O3"
+  dg-runtest [lsort [glob -nocomplain $srcdir/$subdir/*.cc]] $cxx_options "-Os"
+
+}
 
 dg-finish
 
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.special/unwindtest.cc b/Modules/_ctypes/libffi/testsuite/libffi.special/unwindtest.cc
index d7ffd4a..a78f4e7 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.special/unwindtest.cc
+++ b/Modules/_ctypes/libffi/testsuite/libffi.special/unwindtest.cc
@@ -5,6 +5,7 @@
    Originator:	Jeff Sturm <jsturm@one-point.com>  */
 
 /* { dg-do run } */
+
 #include "ffitestcxx.h"
 
 #if defined HAVE_STDINT_H
diff --git a/Modules/_ctypes/libffi/testsuite/libffi.special/unwindtest_ffi_call.cc b/Modules/_ctypes/libffi/testsuite/libffi.special/unwindtest_ffi_call.cc
index 29739cd..57191f2 100644
--- a/Modules/_ctypes/libffi/testsuite/libffi.special/unwindtest_ffi_call.cc
+++ b/Modules/_ctypes/libffi/testsuite/libffi.special/unwindtest_ffi_call.cc
@@ -5,6 +5,7 @@
    Originator:	Andreas Tobler <andreast@gcc.gnu.org> 20061213  */
 
 /* { dg-do run } */
+
 #include "ffitestcxx.h"
 
 static int checking(int a __UNUSED__, short b __UNUSED__,
diff --git a/Modules/_ctypes/libffi/texinfo.tex b/Modules/_ctypes/libffi/texinfo.tex
index ff2c406..a5a7b2b 100644
--- a/Modules/_ctypes/libffi/texinfo.tex
+++ b/Modules/_ctypes/libffi/texinfo.tex
@@ -1,18 +1,18 @@
 % texinfo.tex -- TeX macros to handle Texinfo files.
-%
+% 
 % Load plain if necessary, i.e., if running under initex.
 \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
 %
-\def\texinfoversion{2005-07-05.19}
+\def\texinfoversion{2012-06-05.14}
 %
-% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
-% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software
-% Foundation, Inc.
+% Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
+% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
+% 2007, 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc.
 %
-% This texinfo.tex file is free software; you can redistribute it and/or
+% This texinfo.tex file is free software: you can redistribute it and/or
 % modify it under the terms of the GNU General Public License as
-% published by the Free Software Foundation; either version 2, or (at
-% your option) any later version.
+% published by the Free Software Foundation, either version 3 of the
+% License, or (at your option) any later version.
 %
 % This texinfo.tex file is distributed in the hope that it will be
 % useful, but WITHOUT ANY WARRANTY; without even the implied warranty
@@ -20,9 +20,7 @@
 % General Public License for more details.
 %
 % You should have received a copy of the GNU General Public License
-% along with this texinfo.tex file; see the file COPYING.  If not, write
-% to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-% Boston, MA 02110-1301, USA.
+% along with this program.  If not, see <http://www.gnu.org/licenses/>.
 %
 % As a special exception, when this file is read by TeX when processing
 % a Texinfo source document, you may use the result without
@@ -30,9 +28,9 @@
 %
 % Please try the latest version of texinfo.tex before submitting bug
 % reports; you can get the latest version from:
-%   http://www.gnu.org/software/texinfo/ (the Texinfo home page), or
-%   ftp://tug.org/tex/texinfo.tex
-%     (and all CTAN mirrors, see http://www.ctan.org).
+%   http://ftp.gnu.org/gnu/texinfo/ (the Texinfo release area), or
+%   http://ftpmirror.gnu.org/texinfo/ (same, via a mirror), or
+%   http://www.gnu.org/software/texinfo/ (the Texinfo home page)
 % The texinfo.tex in any given distribution could well be out
 % of date, so if that's what you're using, please check.
 %
@@ -67,7 +65,6 @@
 \everyjob{\message{[Texinfo version \texinfoversion]}%
   \catcode`+=\active \catcode`\_=\active}
 
-\message{Basics,}
 \chardef\other=12
 
 % We never want plain's \outer definition of \+ in Texinfo.
@@ -95,10 +92,13 @@
 \let\ptexnewwrite\newwrite
 \let\ptexnoindent=\noindent
 \let\ptexplus=+
+\let\ptexraggedright=\raggedright
 \let\ptexrbrace=\}
 \let\ptexslash=\/
 \let\ptexstar=\*
 \let\ptext=\t
+\let\ptextop=\top
+{\catcode`\'=\active \global\let\ptexquoteright'}% active in plain's math mode
 
 % If this character appears in an error message or help string, it
 % starts a new line in the output.
@@ -116,10 +116,11 @@
 % Set up fixed words for English if not already set.
 \ifx\putwordAppendix\undefined  \gdef\putwordAppendix{Appendix}\fi
 \ifx\putwordChapter\undefined   \gdef\putwordChapter{Chapter}\fi
+\ifx\putworderror\undefined     \gdef\putworderror{error}\fi
 \ifx\putwordfile\undefined      \gdef\putwordfile{file}\fi
 \ifx\putwordin\undefined        \gdef\putwordin{in}\fi
-\ifx\putwordIndexIsEmpty\undefined     \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
-\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi
+\ifx\putwordIndexIsEmpty\undefined       \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
+\ifx\putwordIndexNonexistent\undefined   \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi
 \ifx\putwordInfo\undefined      \gdef\putwordInfo{Info}\fi
 \ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi
 \ifx\putwordMethodon\undefined  \gdef\putwordMethodon{Method on}\fi
@@ -153,28 +154,25 @@
 \ifx\putwordDefopt\undefined    \gdef\putwordDefopt{User Option}\fi
 \ifx\putwordDeffunc\undefined   \gdef\putwordDeffunc{Function}\fi
 
-% In some macros, we cannot use the `\? notation---the left quote is
-% in some cases the escape char.
-\chardef\backChar  = `\\
+% Since the category of space is not known, we have to be careful.
+\chardef\spacecat = 10
+\def\spaceisspace{\catcode`\ =\spacecat}
+
+% sometimes characters are active, so we need control sequences.
+\chardef\ampChar   = `\&
 \chardef\colonChar = `\:
 \chardef\commaChar = `\,
+\chardef\dashChar  = `\-
 \chardef\dotChar   = `\.
 \chardef\exclamChar= `\!
-\chardef\plusChar  = `\+
+\chardef\hashChar  = `\#
+\chardef\lquoteChar= `\`
 \chardef\questChar = `\?
+\chardef\rquoteChar= `\'
 \chardef\semiChar  = `\;
+\chardef\slashChar = `\/
 \chardef\underChar = `\_
 
-\chardef\spaceChar = `\ %
-\chardef\spacecat = 10
-\def\spaceisspace{\catcode\spaceChar=\spacecat}
-
-{% for help with debugging.
- % example usage: \expandafter\show\activebackslash
- \catcode`\! = 0 \catcode`\\ = \active
- !global!def!activebackslash{\}
-}
-
 % Ignore a token.
 %
 \def\gobble#1{}
@@ -203,36 +201,7 @@
 % that mark overfull boxes (in case you have decided
 % that the text looks ok even though it passes the margin).
 %
-\def\finalout{\overfullrule=0pt}
-
-% @| inserts a changebar to the left of the current line.  It should
-% surround any changed text.  This approach does *not* work if the
-% change spans more than two lines of output.  To handle that, we would
-% have adopt a much more difficult approach (putting marks into the main
-% vertical list for the beginning and end of each change).
-%
-\def\|{%
-  % \vadjust can only be used in horizontal mode.
-  \leavevmode
-  %
-  % Append this vertical mode material after the current line in the output.
-  \vadjust{%
-    % We want to insert a rule with the height and depth of the current
-    % leading; that is exactly what \strutbox is supposed to record.
-    \vskip-\baselineskip
-    %
-    % \vadjust-items are inserted at the left edge of the type.  So
-    % the \llap here moves out into the left-hand margin.
-    \llap{%
-      %
-      % For a thicker or thinner bar, change the `1pt'.
-      \vrule height\baselineskip width1pt
-      %
-      % This is the space between the bar and the text.
-      \hskip 12pt
-    }%
-  }%
-}
+\def\finalout{\overfullrule=0pt }
 
 % Sometimes it is convenient to have everything in the transcript file
 % and nothing on the terminal.  We don't just call \tracingall here,
@@ -250,7 +219,7 @@
   \tracingmacros2
   \tracingrestores1
   \showboxbreadth\maxdimen \showboxdepth\maxdimen
-  \ifx\eTeXversion\undefined\else % etex gives us more logging
+  \ifx\eTeXversion\thisisundefined\else % etex gives us more logging
     \tracingscantokens1
     \tracingifs1
     \tracinggroups1
@@ -261,6 +230,13 @@
   \errorcontextlines16
 }%
 
+% @errormsg{MSG}.  Do the index-like expansions on MSG, but if things
+% aren't perfect, it's not the end of the world, being an error message,
+% after all.
+% 
+\def\errormsg{\begingroup \indexnofonts \doerrormsg}
+\def\doerrormsg#1{\errmessage{#1}}
+
 % add check for \lastpenalty to plain's definitions.  If the last thing
 % we did was a \nobreak, we don't want to insert more space.
 %
@@ -271,7 +247,6 @@
 \def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount
   \removelastskip\penalty-200\bigskip\fi\fi}
 
-% For @cropmarks command.
 % Do @cropmarks to get crop marks.
 %
 \newif\ifcropmarks
@@ -285,6 +260,50 @@
 \newdimen\cornerthick \cornerthick=.3pt
 \newdimen\topandbottommargin \topandbottommargin=.75in
 
+% Output a mark which sets \thischapter, \thissection and \thiscolor.
+% We dump everything together because we only have one kind of mark.
+% This works because we only use \botmark / \topmark, not \firstmark.
+%
+% A mark contains a subexpression of the \ifcase ... \fi construct.
+% \get*marks macros below extract the needed part using \ifcase.
+%
+% Another complication is to let the user choose whether \thischapter
+% (\thissection) refers to the chapter (section) in effect at the top
+% of a page, or that at the bottom of a page.  The solution is
+% described on page 260 of The TeXbook.  It involves outputting two
+% marks for the sectioning macros, one before the section break, and
+% one after.  I won't pretend I can describe this better than DEK...
+\def\domark{%
+  \toks0=\expandafter{\lastchapterdefs}%
+  \toks2=\expandafter{\lastsectiondefs}%
+  \toks4=\expandafter{\prevchapterdefs}%
+  \toks6=\expandafter{\prevsectiondefs}%
+  \toks8=\expandafter{\lastcolordefs}%
+  \mark{%
+                   \the\toks0 \the\toks2
+      \noexpand\or \the\toks4 \the\toks6
+    \noexpand\else \the\toks8
+  }%
+}
+% \topmark doesn't work for the very first chapter (after the title
+% page or the contents), so we use \firstmark there -- this gets us
+% the mark with the chapter defs, unless the user sneaks in, e.g.,
+% @setcolor (or @url, or @link, etc.) between @contents and the very
+% first @chapter.
+\def\gettopheadingmarks{%
+  \ifcase0\topmark\fi
+  \ifx\thischapter\empty \ifcase0\firstmark\fi \fi
+}
+\def\getbottomheadingmarks{\ifcase1\botmark\fi}
+\def\getcolormarks{\ifcase2\topmark\fi}
+
+% Avoid "undefined control sequence" errors.
+\def\lastchapterdefs{}
+\def\lastsectiondefs{}
+\def\prevchapterdefs{}
+\def\prevsectiondefs{}
+\def\lastcolordefs{}
+
 % Main output routine.
 \chardef\PAGE = 255
 \output = {\onepageout{\pagecontents\PAGE}}
@@ -302,7 +321,9 @@
   %
   % Do this outside of the \shipout so @code etc. will be expanded in
   % the headline as they should be, not taken literally (outputting ''code).
+  \ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi
   \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}%
+  \ifodd\pageno \getoddfootingmarks \else \getevenfootingmarks \fi
   \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}%
   %
   {%
@@ -311,6 +332,13 @@
     % before the \shipout runs.
     %
     \indexdummies         % don't expand commands in the output.
+    \normalturnoffactive  % \ in index entries must not stay \, e.g., if
+               % the page break happens to be in the middle of an example.
+               % We don't want .vr (or whatever) entries like this:
+               % \entry{{\tt \indexbackslash }acronym}{32}{\code {\acronym}}
+               % "\acronym" won't work when it's read back in;
+               % it needs to be
+               % {\code {{\tt \backslashcurfont }acronym}
     \shipout\vbox{%
       % Do this early so pdf references go to the beginning of the page.
       \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi
@@ -338,9 +366,9 @@
       \pagebody{#1}%
       \ifdim\ht\footlinebox > 0pt
         % Only leave this space if the footline is nonempty.
-        % (We lessened \vsize for it in \oddfootingxxx.)
+        % (We lessened \vsize for it in \oddfootingyyy.)
         % The \baselineskip=24pt in plain's \makefootline has no effect.
-        \vskip 2\baselineskip
+        \vskip 24pt
         \unvbox\footlinebox
       \fi
       %
@@ -374,7 +402,7 @@
 % marginal hacks, juha@viisa.uucp (Juha Takala)
 \ifvoid\margin\else % marginal info is present
   \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi
-\dimen@=\dp#1 \unvbox#1
+\dimen@=\dp#1\relax \unvbox#1\relax
 \ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
 \ifr@ggedbottom \kern-\dimen@ \vfil \fi}
 }
@@ -396,7 +424,7 @@
 %
 \def\parsearg{\parseargusing{}}
 \def\parseargusing#1#2{%
-  \def\next{#2}%
+  \def\argtorun{#2}%
   \begingroup
     \obeylines
     \spaceisspace
@@ -415,7 +443,7 @@
 \def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
 \def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm}
 
-% Each occurence of `\^^M' or `<space>\^^M' is replaced by a single space.
+% Each occurrence of `\^^M' or `<space>\^^M' is replaced by a single space.
 %
 % \argremovec might leave us with trailing space, e.g.,
 %    @end itemize  @c foo
@@ -427,8 +455,7 @@
 \def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{%
   \def\temp{#3}%
   \ifx\temp\empty
-    % We cannot use \next here, as it holds the macro to run;
-    % thus we reuse \temp.
+    % Do not use \next, perhaps the caller of \parsearg uses it; reuse \temp:
     \let\temp\finishparsearg
   \else
     \let\temp\argcheckspaces
@@ -440,14 +467,14 @@
 % If a _delimited_ argument is enclosed in braces, they get stripped; so
 % to get _exactly_ the rest of the line, we had to prevent such situation.
 % We prepended an \empty token at the very beginning and we expand it now,
-% just before passing the control to \next.
-% (Similarily, we have to think about #3 of \argcheckspacesY above: it is
+% just before passing the control to \argtorun.
+% (Similarly, we have to think about #3 of \argcheckspacesY above: it is
 % either the null string, or it ends with \^^M---thus there is no danger
 % that a pair of braces would be stripped.
 %
 % But first, we have to remove the trailing space token.
 %
-\def\finishparsearg#1 \ArgTerm{\expandafter\next\expandafter{#1}}
+\def\finishparsearg#1 \ArgTerm{\expandafter\argtorun\expandafter{#1}}
 
 % \parseargdef\foo{...}
 %	is roughly equivalent to
@@ -498,12 +525,12 @@
 % used to check whether the current environment is the one expected.
 %
 % Non-false conditionals (@iftex, @ifset) don't fit into this, so they
-% are not treated as enviroments; they don't open a group.  (The
+% are not treated as environments; they don't open a group.  (The
 % implementation of @end takes care not to call \endgroup in this
 % special case.)
 
 
-% At runtime, environments start with this:
+% At run-time, environments start with this:
 \def\startenvironment#1{\begingroup\def\thisenv{#1}}
 % initialize
 \let\thisenv\empty
@@ -521,7 +548,7 @@
   \fi
 }
 
-% Evironment mismatch, #1 expected:
+% Environment mismatch, #1 expected:
 \def\badenverr{%
   \errhelp = \EMsimple
   \errmessage{This command can appear only \inenvironment\temp,
@@ -529,7 +556,7 @@
 }
 \def\inenvironment#1{%
   \ifx#1\empty
-    out of any environment%
+    outside of any environment%
   \else
     in environment \expandafter\string#1%
   \fi
@@ -541,7 +568,7 @@
 \parseargdef\end{%
   \if 1\csname iscond.#1\endcsname
   \else
-    % The general wording of \badenverr may not be ideal, but... --kasal, 06nov03
+    % The general wording of \badenverr may not be ideal.
     \expandafter\checkenv\csname#1\endcsname
     \csname E#1\endcsname
     \endgroup
@@ -551,85 +578,6 @@
 \newhelp\EMsimple{Press RETURN to continue.}
 
 
-%% Simple single-character @ commands
-
-% @@ prints an @
-% Kludge this until the fonts are right (grr).
-\def\@{{\tt\char64}}
-
-% This is turned off because it was never documented
-% and you can use @w{...} around a quote to suppress ligatures.
-%% Define @` and @' to be the same as ` and '
-%% but suppressing ligatures.
-%\def\`{{`}}
-%\def\'{{'}}
-
-% Used to generate quoted braces.
-\def\mylbrace {{\tt\char123}}
-\def\myrbrace {{\tt\char125}}
-\let\{=\mylbrace
-\let\}=\myrbrace
-\begingroup
-  % Definitions to produce \{ and \} commands for indices,
-  % and @{ and @} for the aux/toc files.
-  \catcode`\{ = \other \catcode`\} = \other
-  \catcode`\[ = 1 \catcode`\] = 2
-  \catcode`\! = 0 \catcode`\\ = \other
-  !gdef!lbracecmd[\{]%
-  !gdef!rbracecmd[\}]%
-  !gdef!lbraceatcmd[@{]%
-  !gdef!rbraceatcmd[@}]%
-!endgroup
-
-% @comma{} to avoid , parsing problems.
-\let\comma = ,
-
-% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
-% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H.
-\let\, = \c
-\let\dotaccent = \.
-\def\ringaccent#1{{\accent23 #1}}
-\let\tieaccent = \t
-\let\ubaraccent = \b
-\let\udotaccent = \d
-
-% Other special characters: @questiondown @exclamdown @ordf @ordm
-% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss.
-\def\questiondown{?`}
-\def\exclamdown{!`}
-\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}}
-\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}}
-
-% Dotless i and dotless j, used for accents.
-\def\imacro{i}
-\def\jmacro{j}
-\def\dotless#1{%
-  \def\temp{#1}%
-  \ifx\temp\imacro \ptexi
-  \else\ifx\temp\jmacro \j
-  \else \errmessage{@dotless can be used only with i or j}%
-  \fi\fi
-}
-
-% The \TeX{} logo, as in plain, but resetting the spacing so that a
-% period following counts as ending a sentence.  (Idea found in latex.)
-%
-\edef\TeX{\TeX \spacefactor=1000 }
-
-% @LaTeX{} logo.  Not quite the same results as the definition in
-% latex.ltx, since we use a different font for the raised A; it's most
-% convenient for us to use an explicitly smaller font, rather than using
-% the \scriptstyle font (since we don't reset \scriptstyle and
-% \scriptscriptstyle).
-%
-\def\LaTeX{%
-  L\kern-.36em
-  {\setbox0=\hbox{T}%
-   \vbox to \ht0{\hbox{\selectfonts\lllsize A}\vss}}%
-  \kern-.15em
-  \TeX
-}
-
 % Be sure we're in horizontal mode when doing a tie, since we make space
 % equivalent to this in @example-like environments. Otherwise, a space
 % at the beginning of a line will start with \penalty -- and
@@ -661,7 +609,7 @@
 \def\?{?\spacefactor=\endofsentencespacefactor\space}
 
 % @frenchspacing on|off  says whether to put extra space after punctuation.
-% 
+%
 \def\onword{on}
 \def\offword{off}
 %
@@ -671,7 +619,7 @@
   \else\ifx\temp\offword \plainnonfrenchspacing
   \else
     \errhelp = \EMsimple
-    \errmessage{Unknown @frenchspacing option `\temp', must be on/off}%
+    \errmessage{Unknown @frenchspacing option `\temp', must be on|off}%
   \fi\fi
 }
 
@@ -753,15 +701,6 @@
 
 \newdimen\mil  \mil=0.001in
 
-% Old definition--didn't work.
-%\parseargdef\need{\par %
-%% This method tries to make TeX break the page naturally
-%% if the depth of the box does not fit.
-%{\baselineskip=0pt%
-%\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak
-%\prevdepth=-1000pt
-%}}
-
 \parseargdef\need{%
   % Ensure vertical mode, so we don't make a big box in the middle of a
   % paragraph.
@@ -825,7 +764,7 @@
 
 % @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current
 % paragraph.  For more general purposes, use the \margin insertion
-% class.  WHICH is `l' or `r'.
+% class.  WHICH is `l' or `r'.  Not documented, written for gawk manual.
 %
 \newskip\inmarginspacing \inmarginspacing=1cm
 \def\strutdepth{\dp\strutbox}
@@ -872,15 +811,51 @@
   \temp
 }
 
-% @include file    insert text of that file as input.
+% @| inserts a changebar to the left of the current line.  It should
+% surround any changed text.  This approach does *not* work if the
+% change spans more than two lines of output.  To handle that, we would
+% have adopt a much more difficult approach (putting marks into the main
+% vertical list for the beginning and end of each change).  This command
+% is not documented, not supported, and doesn't work.
+%
+\def\|{%
+  % \vadjust can only be used in horizontal mode.
+  \leavevmode
+  %
+  % Append this vertical mode material after the current line in the output.
+  \vadjust{%
+    % We want to insert a rule with the height and depth of the current
+    % leading; that is exactly what \strutbox is supposed to record.
+    \vskip-\baselineskip
+    %
+    % \vadjust-items are inserted at the left edge of the type.  So
+    % the \llap here moves out into the left-hand margin.
+    \llap{%
+      %
+      % For a thicker or thinner bar, change the `1pt'.
+      \vrule height\baselineskip width1pt
+      %
+      % This is the space between the bar and the text.
+      \hskip 12pt
+    }%
+  }%
+}
+
+% @include FILE -- \input text of FILE.
 %
 \def\include{\parseargusing\filenamecatcodes\includezzz}
 \def\includezzz#1{%
   \pushthisfilestack
   \def\thisfile{#1}%
   {%
-    \makevalueexpandable
-    \def\temp{\input #1 }%
+    \makevalueexpandable  % we want to expand any @value in FILE.
+    \turnoffactive        % and allow special characters in the expansion
+    \indexnofonts         % Allow `@@' and other weird things in file names.
+    \wlog{texinfo.tex: doing @include of #1^^J}%
+    \edef\temp{\noexpand\input #1 }%
+    %
+    % This trickery is to read FILE outside of a group, in case it makes
+    % definitions, etc.
     \expandafter
   }\temp
   \popthisfilestack
@@ -895,6 +870,8 @@
   \catcode`>=\other
   \catcode`+=\other
   \catcode`-=\other
+  \catcode`\`=\other
+  \catcode`\'=\other
 }
 
 \def\pushthisfilestack{%
@@ -910,7 +887,7 @@
 \def\popthisfilestack{\errthisfilestackempty}
 \def\errthisfilestackempty{\errmessage{Internal error:
   the stack of filenames is empty.}}
-
+%
 \def\thisfile{}
 
 % @center line
@@ -918,36 +895,46 @@
 %
 \parseargdef\center{%
   \ifhmode
-    \let\next\centerH
+    \let\centersub\centerH
   \else
-    \let\next\centerV
+    \let\centersub\centerV
   \fi
-  \next{\hfil \ignorespaces#1\unskip \hfil}%
+  \centersub{\hfil \ignorespaces#1\unskip \hfil}%
+  \let\centersub\relax % don't let the definition persist, just in case
 }
-\def\centerH#1{%
-  {%
-    \hfil\break
-    \advance\hsize by -\leftskip
-    \advance\hsize by -\rightskip
-    \line{#1}%
-    \break
-  }%
+\def\centerH#1{{%
+  \hfil\break
+  \advance\hsize by -\leftskip
+  \advance\hsize by -\rightskip
+  \line{#1}%
+  \break
+}}
+%
+\newcount\centerpenalty
+\def\centerV#1{%
+  % The idea here is the same as in \startdefun, \cartouche, etc.: if
+  % @center is the first thing after a section heading, we need to wipe
+  % out the negative parskip inserted by \sectionheading, but still
+  % prevent a page break here.
+  \centerpenalty = \lastpenalty
+  \ifnum\centerpenalty>10000 \vskip\parskip \fi
+  \ifnum\centerpenalty>9999 \penalty\centerpenalty \fi
+  \line{\kern\leftskip #1\kern\rightskip}%
 }
-\def\centerV#1{\line{\kern\leftskip #1\kern\rightskip}}
 
 % @sp n   outputs n lines of vertical space
-
+%
 \parseargdef\sp{\vskip #1\baselineskip}
 
 % @comment ...line which is ignored...
 % @c is the same as @comment
 % @ignore ... @end ignore  is another way to write a comment
-
+%
 \def\comment{\begingroup \catcode`\^^M=\other%
 \catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
 \commentxxx}
 {\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}}
-
+%
 \let\c=\comment
 
 % @paragraphindent NCHARS
@@ -1040,86 +1027,6 @@
 }
 
 
-% @asis just yields its argument.  Used with @table, for example.
-%
-\def\asis#1{#1}
-
-% @math outputs its argument in math mode.
-%
-% One complication: _ usually means subscripts, but it could also mean
-% an actual _ character, as in @math{@var{some_variable} + 1}.  So make
-% _ active, and distinguish by seeing if the current family is \slfam,
-% which is what @var uses.
-{
-  \catcode\underChar = \active
-  \gdef\mathunderscore{%
-    \catcode\underChar=\active
-    \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
-  }
-}
-% Another complication: we want \\ (and @\) to output a \ character.
-% FYI, plain.tex uses \\ as a temporary control sequence (why?), but
-% this is not advertised and we don't care.  Texinfo does not
-% otherwise define @\.
-%
-% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\.
-\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi}
-%
-\def\math{%
-  \tex
-  \mathunderscore
-  \let\\ = \mathbackslash
-  \mathactive
-  $\finishmath
-}
-\def\finishmath#1{#1$\endgroup}  % Close the group opened by \tex.
-
-% Some active characters (such as <) are spaced differently in math.
-% We have to reset their definitions in case the @math was an argument
-% to a command which sets the catcodes (such as @item or @section).
-%
-{
-  \catcode`^ = \active
-  \catcode`< = \active
-  \catcode`> = \active
-  \catcode`+ = \active
-  \gdef\mathactive{%
-    \let^ = \ptexhat
-    \let< = \ptexless
-    \let> = \ptexgtr
-    \let+ = \ptexplus
-  }
-}
-
-% @bullet and @minus need the same treatment as @math, just above.
-\def\bullet{$\ptexbullet$}
-\def\minus{$-$}
-
-% @dots{} outputs an ellipsis using the current font.
-% We do .5em per period so that it has the same spacing in a typewriter
-% font as three actual period characters.
-%
-\def\dots{%
-  \leavevmode
-  \hbox to 1.5em{%
-    \hskip 0pt plus 0.25fil
-    .\hfil.\hfil.%
-    \hskip 0pt plus 0.5fil
-  }%
-}
-
-% @enddots{} is an end-of-sentence ellipsis.
-%
-\def\enddots{%
-  \dots
-  \spacefactor=\endofsentencespacefactor
-}
-
-% @comma{} is so commas can be inserted into text without messing up
-% Texinfo's parsing.
-%
-\let\comma = ,
-
 % @refill is a no-op.
 \let\refill=\relax
 
@@ -1184,9 +1091,8 @@
 \newif\ifpdfmakepagedest
 
 % when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1
-% can be set).  So we test for \relax and 0 as well as \undefined,
-% borrowed from ifpdf.sty.
-\ifx\pdfoutput\undefined
+% can be set).  So we test for \relax and 0 as well as being undefined.
+\ifx\pdfoutput\thisisundefined
 \else
   \ifx\pdfoutput\relax
   \else
@@ -1197,99 +1103,156 @@
   \fi
 \fi
 
-% PDF uses PostScript string constants for the names of xref targets, to
+% PDF uses PostScript string constants for the names of xref targets,
 % for display in the outlines, and in other places.  Thus, we have to
 % double any backslashes.  Otherwise, a name like "\node" will be
 % interpreted as a newline (\n), followed by o, d, e.  Not good.
-% http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html
-% (and related messages, the final outcome is that it is up to the TeX
-% user to double the backslashes and otherwise make the string valid, so
-% that's we do).
-
-% double active backslashes.
 % 
-{\catcode`\@=0 \catcode`\\=\active
- @gdef@activebackslash{@catcode`@\=@active @otherbackslash}
- @gdef@activebackslashdouble{%
-   @catcode@backChar=@active
-   @let\=@doublebackslash}
+% See http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html and
+% related messages.  The final outcome is that it is up to the TeX user
+% to double the backslashes and otherwise make the string valid, so
+% that's what we do.  pdftex 1.30.0 (ca.2005) introduced a primitive to
+% do this reliably, so we use it.
+
+% #1 is a control sequence in which to do the replacements,
+% which we \xdef.
+\def\txiescapepdf#1{%
+  \ifx\pdfescapestring\thisisundefined
+    % No primitive available; should we give a warning or log?
+    % Many times it won't matter.
+  \else
+    % The expandable \pdfescapestring primitive escapes parentheses,
+    % backslashes, and other special chars.
+    \xdef#1{\pdfescapestring{#1}}%
+  \fi
 }
 
-% To handle parens, we must adopt a different approach, since parens are
-% not active characters.  hyperref.dtx (which has the same problem as
-% us) handles it with this amazing macro to replace tokens.  I've
-% tinkered with it a little for texinfo, but it's definitely from there.
-% 
-% #1 is the tokens to replace.
-% #2 is the replacement.
-% #3 is the control sequence with the string.
-% 
-\def\HyPsdSubst#1#2#3{%
-  \def\HyPsdReplace##1#1##2\END{%
-    ##1%
-    \ifx\\##2\\%
-    \else
-      #2%
-      \HyReturnAfterFi{%
-        \HyPsdReplace##2\END
-      }%
-    \fi
-  }%
-  \xdef#3{\expandafter\HyPsdReplace#3#1\END}%
-}
-\long\def\HyReturnAfterFi#1\fi{\fi#1}
-
-% #1 is a control sequence in which to do the replacements.
-\def\backslashparens#1{%
-  \xdef#1{#1}% redefine it as its expansion; the definition is simply
-             % \lastnode when called from \setref -> \pdfmkdest.
-  \HyPsdSubst{(}{\backslashlparen}{#1}%
-  \HyPsdSubst{)}{\backslashrparen}{#1}%
-}
-
-{\catcode\exclamChar = 0 \catcode\backChar = \other
- !gdef!backslashlparen{\(}%
- !gdef!backslashrparen{\)}%
-}
+\newhelp\nopdfimagehelp{Texinfo supports .png, .jpg, .jpeg, and .pdf images
+with PDF output, and none of those formats could be found.  (.eps cannot
+be supported due to the design of the PDF format; use regular TeX (DVI
+output) for that.)}
 
 \ifpdf
-  \input pdfcolor
-  \pdfcatalog{/PageMode /UseOutlines}%
+  %
+  % Color manipulation macros based on pdfcolor.tex,
+  % except using rgb instead of cmyk; the latter is said to render as a
+  % very dark gray on-screen and a very dark halftone in print, instead
+  % of actual black.
+  \def\rgbDarkRed{0.50 0.09 0.12}
+  \def\rgbBlack{0 0 0}
+  %
+  % k sets the color for filling (usual text, etc.);
+  % K sets the color for stroking (thin rules, e.g., normal _'s).
+  \def\pdfsetcolor#1{\pdfliteral{#1 rg  #1 RG}}
+  %
+  % Set color, and create a mark which defines \thiscolor accordingly,
+  % so that \makeheadline knows which color to restore.
+  \def\setcolor#1{%
+    \xdef\lastcolordefs{\gdef\noexpand\thiscolor{#1}}%
+    \domark
+    \pdfsetcolor{#1}%
+  }
+  %
+  \def\maincolor{\rgbBlack}
+  \pdfsetcolor{\maincolor}
+  \edef\thiscolor{\maincolor}
+  \def\lastcolordefs{}
+  %
+  \def\makefootline{%
+    \baselineskip24pt
+    \line{\pdfsetcolor{\maincolor}\the\footline}%
+  }
+  %
+  \def\makeheadline{%
+    \vbox to 0pt{%
+      \vskip-22.5pt
+      \line{%
+        \vbox to8.5pt{}%
+        % Extract \thiscolor definition from the marks.
+        \getcolormarks
+        % Typeset the headline with \maincolor, then restore the color.
+        \pdfsetcolor{\maincolor}\the\headline\pdfsetcolor{\thiscolor}%
+      }%
+      \vss
+    }%
+    \nointerlineskip
+  }
+  %
+  %
+  \pdfcatalog{/PageMode /UseOutlines}
+  %
+  % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto).
   \def\dopdfimage#1#2#3{%
-    \def\imagewidth{#2}%
-    \def\imageheight{#3}%
-    % without \immediate, pdftex seg faults when the same image is
+    \def\pdfimagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}%
+    \def\pdfimageheight{#3}\setbox2 = \hbox{\ignorespaces #3}%
+    %
+    % pdftex (and the PDF format) support .pdf, .png, .jpg (among
+    % others).  Let's try in that order, PDF first since if
+    % someone has a scalable image, presumably better to use that than a
+    % bitmap.
+    \let\pdfimgext=\empty
+    \begingroup
+      \openin 1 #1.pdf \ifeof 1
+        \openin 1 #1.PDF \ifeof 1
+          \openin 1 #1.png \ifeof 1
+            \openin 1 #1.jpg \ifeof 1
+              \openin 1 #1.jpeg \ifeof 1
+                \openin 1 #1.JPG \ifeof 1
+                  \errhelp = \nopdfimagehelp
+                  \errmessage{Could not find image file #1 for pdf}%
+                \else \gdef\pdfimgext{JPG}%
+                \fi
+              \else \gdef\pdfimgext{jpeg}%
+              \fi
+            \else \gdef\pdfimgext{jpg}%
+            \fi
+          \else \gdef\pdfimgext{png}%
+          \fi
+        \else \gdef\pdfimgext{PDF}%
+        \fi
+      \else \gdef\pdfimgext{pdf}%
+      \fi
+      \closein 1
+    \endgroup
+    %
+    % without \immediate, ancient pdftex seg faults when the same image is
     % included twice.  (Version 3.14159-pre-1.0-unofficial-20010704.)
     \ifnum\pdftexversion < 14
       \immediate\pdfimage
     \else
       \immediate\pdfximage
     \fi
-      \ifx\empty\imagewidth\else width \imagewidth \fi
-      \ifx\empty\imageheight\else height \imageheight \fi
+      \ifdim \wd0 >0pt width \pdfimagewidth \fi
+      \ifdim \wd2 >0pt height \pdfimageheight \fi
       \ifnum\pdftexversion<13
-         #1.pdf%
+         #1.\pdfimgext
        \else
-         {#1.pdf}%
+         {#1.\pdfimgext}%
        \fi
     \ifnum\pdftexversion < 14 \else
       \pdfrefximage \pdflastximage
     \fi}
+  %
   \def\pdfmkdest#1{{%
     % We have to set dummies so commands such as @code, and characters
     % such as \, aren't expanded when present in a section title.
-    \atdummies
-    \activebackslashdouble
+    \indexnofonts
+    \turnoffactive
+    \makevalueexpandable
     \def\pdfdestname{#1}%
-    \backslashparens\pdfdestname
-    \pdfdest name{\pdfdestname} xyz%
-  }}%
+    \txiescapepdf\pdfdestname
+    \safewhatsit{\pdfdest name{\pdfdestname} xyz}%
+  }}
   %
   % used to mark target names; must be expandable.
-  \def\pdfmkpgn#1{#1}%
+  \def\pdfmkpgn#1{#1}
   %
-  \let\linkcolor = \Blue  % was Cyan, but that seems light?
-  \def\endlink{\Black\pdfendlink}
+  % by default, use a color that is dark enough to print on paper as
+  % nearly black, but still distinguishable for online viewing.
+  \def\urlcolor{\rgbDarkRed}
+  \def\linkcolor{\rgbDarkRed}
+  \def\endlink{\setcolor{\maincolor}\pdfendlink}
+  %
   % Adding outlines to PDF; macros for calculating structure of outlines
   % come from Petr Olsak
   \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
@@ -1309,29 +1272,24 @@
     % page number.  We could generate a destination for the section
     % text in the case where a section has no node, but it doesn't
     % seem worth the trouble, since most documents are normally structured.
-    \def\pdfoutlinedest{#3}%
+    \edef\pdfoutlinedest{#3}%
     \ifx\pdfoutlinedest\empty
       \def\pdfoutlinedest{#4}%
     \else
-      % Doubled backslashes in the name.
-      {\activebackslashdouble \xdef\pdfoutlinedest{#3}%
-       \backslashparens\pdfoutlinedest}%
+      \txiescapepdf\pdfoutlinedest
     \fi
     %
-    % Also double the backslashes in the display string.
-    {\activebackslashdouble \xdef\pdfoutlinetext{#1}%
-     \backslashparens\pdfoutlinetext}%
+    % Also escape PDF chars in the display string.
+    \edef\pdfoutlinetext{#1}%
+    \txiescapepdf\pdfoutlinetext
     %
     \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}%
   }
   %
   \def\pdfmakeoutlines{%
     \begingroup
-      % Thanh's hack / proper braces in bookmarks
-      \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace
-      \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace
-      %
       % Read toc silently, to get counts of subentries for \pdfoutline.
+      \def\partentry##1##2##3##4{}% ignore parts in the outlines
       \def\numchapentry##1##2##3##4{%
 	\def\thischapnum{##2}%
 	\def\thissecnum{0}%
@@ -1385,35 +1343,63 @@
       % Latin 2 (0xea) gets translated to a | character.  Info from
       % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100.
       %
-      % xx to do this right, we have to translate 8-bit characters to
-      % their "best" equivalent, based on the @documentencoding.  Right
-      % now, I guess we'll just let the pdf reader have its way.
+      % TODO this right, we have to translate 8-bit characters to
+      % their "best" equivalent, based on the @documentencoding.  Too
+      % much work for too little return.  Just use the ASCII equivalents
+      % we use for the index sort strings.
+      % 
       \indexnofonts
       \setupdatafile
-      \activebackslash
-      \input \jobname.toc
+      % We can have normal brace characters in the PDF outlines, unlike
+      % Texinfo index files.  So set that up.
+      \def\{{\lbracecharliteral}%
+      \def\}{\rbracecharliteral}%
+      \catcode`\\=\active \otherbackslash
+      \input \tocreadfilename
     \endgroup
   }
+  {\catcode`[=1 \catcode`]=2
+   \catcode`{=\other \catcode`}=\other
+   \gdef\lbracecharliteral[{]%
+   \gdef\rbracecharliteral[}]%
+  ]
   %
   \def\skipspaces#1{\def\PP{#1}\def\D{|}%
     \ifx\PP\D\let\nextsp\relax
     \else\let\nextsp\skipspaces
-      \ifx\p\space\else\addtokens{\filename}{\PP}%
-        \advance\filenamelength by 1
-      \fi
+      \addtokens{\filename}{\PP}%
+      \advance\filenamelength by 1
     \fi
     \nextsp}
-  \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax}
+  \def\getfilename#1{%
+    \filenamelength=0
+    % If we don't expand the argument now, \skipspaces will get
+    % snagged on things like "@value{foo}".
+    \edef\temp{#1}%
+    \expandafter\skipspaces\temp|\relax
+  }
   \ifnum\pdftexversion < 14
     \let \startlink \pdfannotlink
   \else
     \let \startlink \pdfstartlink
   \fi
+  % make a live url in pdf output.
   \def\pdfurl#1{%
     \begingroup
-      \normalturnoffactive\def\@{@}%
+      % it seems we really need yet another set of dummies; have not
+      % tried to figure out what each command should do in the context
+      % of @url.  for now, just make @/ a no-op, that's the only one
+      % people have actually reported a problem with.
+      %
+      \normalturnoffactive
+      \def\@{@}%
+      \let\/=\empty
       \makevalueexpandable
-      \leavevmode\Red
+      % do we want to go so far as to use \indexnofonts instead of just
+      % special-casing \var here?
+      \def\var##1{##1}%
+      %
+      \leavevmode\setcolor{\urlcolor}%
       \startlink attr{/Border [0 0 0]}%
         user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
     \endgroup}
@@ -1440,13 +1426,15 @@
     {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
   \def\pdflink#1{%
     \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}}
-    \linkcolor #1\endlink}
+    \setcolor{\linkcolor}#1\endlink}
   \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
 \else
+  % non-pdf mode
   \let\pdfmkdest = \gobble
   \let\pdfurl = \gobble
   \let\endlink = \relax
-  \let\linkcolor = \relax
+  \let\setcolor = \gobble
+  \let\pdfsetcolor = \gobble
   \let\pdfmakeoutlines = \relax
 \fi  % \ifx\pdfoutput
 
@@ -1472,6 +1460,10 @@
 \def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf}
 \def\tt{\fam=\ttfam \setfontstyle{tt}}
 
+% Unfortunately, we have to override this for titles and the like, since
+% in those cases "rm" is bold.  Sigh.
+\def\rmisbold{\rm\def\curfontstyle{bf}}
+
 % Texinfo sort of supports the sans serif font style, which plain TeX does not.
 % So we set up a \sf.
 \newfam\sffam
@@ -1481,8 +1473,6 @@
 % We don't need math for this font style.
 \def\ttsl{\setfontstyle{ttsl}}
 
-% Default leading.
-\newdimen\textleading  \textleading = 13.2pt
 
 % Set the baselineskip to #1, and the lineskip and strut size
 % correspondingly.  There is no deep meaning behind these magic numbers
@@ -1492,8 +1482,13 @@
 \def\strutheightpercent{.70833}
 \def\strutdepthpercent {.29167}
 %
+% can get a sort of poor man's double spacing by redefining this.
+\def\baselinefactor{1}
+%
+\newdimen\textleading
 \def\setleading#1{%
-  \normalbaselineskip = #1\relax
+  \dimen0 = #1\relax
+  \normalbaselineskip = \baselinefactor\dimen0
   \normallineskip = \lineskipfactor\normalbaselineskip
   \normalbaselines
   \setbox\strutbox =\hbox{%
@@ -1502,20 +1497,295 @@
   }%
 }
 
-% Set the font macro #1 to the font named #2, adding on the
-% specified font prefix (normally `cm').
-% #3 is the font's design size, #4 is a scale factor
-\def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4}
+% PDF CMaps.  See also LaTeX's t1.cmap.
+%
+% do nothing with this by default.
+\expandafter\let\csname cmapOT1\endcsname\gobble
+\expandafter\let\csname cmapOT1IT\endcsname\gobble
+\expandafter\let\csname cmapOT1TT\endcsname\gobble
+
+% if we are producing pdf, and we have \pdffontattr, then define cmaps.
+% (\pdffontattr was introduced many years ago, but people still run
+% older pdftex's; it's easy to conditionalize, so we do.)
+\ifpdf \ifx\pdffontattr\thisisundefined \else
+  \begingroup
+    \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
+    \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
+%%DocumentNeededResources: ProcSet (CIDInit)
+%%IncludeResource: ProcSet (CIDInit)
+%%BeginResource: CMap (TeX-OT1-0)
+%%Title: (TeX-OT1-0 TeX OT1 0)
+%%Version: 1.000
+%%EndComments
+/CIDInit /ProcSet findresource begin
+12 dict begin
+begincmap
+/CIDSystemInfo
+<< /Registry (TeX)
+/Ordering (OT1)
+/Supplement 0
+>> def
+/CMapName /TeX-OT1-0 def
+/CMapType 2 def
+1 begincodespacerange
+<00> <7F>
+endcodespacerange
+8 beginbfrange
+<00> <01> <0393>
+<09> <0A> <03A8>
+<23> <26> <0023>
+<28> <3B> <0028>
+<3F> <5B> <003F>
+<5D> <5E> <005D>
+<61> <7A> <0061>
+<7B> <7C> <2013>
+endbfrange
+40 beginbfchar
+<02> <0398>
+<03> <039B>
+<04> <039E>
+<05> <03A0>
+<06> <03A3>
+<07> <03D2>
+<08> <03A6>
+<0B> <00660066>
+<0C> <00660069>
+<0D> <0066006C>
+<0E> <006600660069>
+<0F> <00660066006C>
+<10> <0131>
+<11> <0237>
+<12> <0060>
+<13> <00B4>
+<14> <02C7>
+<15> <02D8>
+<16> <00AF>
+<17> <02DA>
+<18> <00B8>
+<19> <00DF>
+<1A> <00E6>
+<1B> <0153>
+<1C> <00F8>
+<1D> <00C6>
+<1E> <0152>
+<1F> <00D8>
+<21> <0021>
+<22> <201D>
+<27> <2019>
+<3C> <00A1>
+<3D> <003D>
+<3E> <00BF>
+<5C> <201C>
+<5F> <02D9>
+<60> <2018>
+<7D> <02DD>
+<7E> <007E>
+<7F> <00A8>
+endbfchar
+endcmap
+CMapName currentdict /CMap defineresource pop
+end
+end
+%%EndResource
+%%EOF
+    }\endgroup
+  \expandafter\edef\csname cmapOT1\endcsname#1{%
+    \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
+  }%
+%
+% \cmapOT1IT
+  \begingroup
+    \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
+    \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
+%%DocumentNeededResources: ProcSet (CIDInit)
+%%IncludeResource: ProcSet (CIDInit)
+%%BeginResource: CMap (TeX-OT1IT-0)
+%%Title: (TeX-OT1IT-0 TeX OT1IT 0)
+%%Version: 1.000
+%%EndComments
+/CIDInit /ProcSet findresource begin
+12 dict begin
+begincmap
+/CIDSystemInfo
+<< /Registry (TeX)
+/Ordering (OT1IT)
+/Supplement 0
+>> def
+/CMapName /TeX-OT1IT-0 def
+/CMapType 2 def
+1 begincodespacerange
+<00> <7F>
+endcodespacerange
+8 beginbfrange
+<00> <01> <0393>
+<09> <0A> <03A8>
+<25> <26> <0025>
+<28> <3B> <0028>
+<3F> <5B> <003F>
+<5D> <5E> <005D>
+<61> <7A> <0061>
+<7B> <7C> <2013>
+endbfrange
+42 beginbfchar
+<02> <0398>
+<03> <039B>
+<04> <039E>
+<05> <03A0>
+<06> <03A3>
+<07> <03D2>
+<08> <03A6>
+<0B> <00660066>
+<0C> <00660069>
+<0D> <0066006C>
+<0E> <006600660069>
+<0F> <00660066006C>
+<10> <0131>
+<11> <0237>
+<12> <0060>
+<13> <00B4>
+<14> <02C7>
+<15> <02D8>
+<16> <00AF>
+<17> <02DA>
+<18> <00B8>
+<19> <00DF>
+<1A> <00E6>
+<1B> <0153>
+<1C> <00F8>
+<1D> <00C6>
+<1E> <0152>
+<1F> <00D8>
+<21> <0021>
+<22> <201D>
+<23> <0023>
+<24> <00A3>
+<27> <2019>
+<3C> <00A1>
+<3D> <003D>
+<3E> <00BF>
+<5C> <201C>
+<5F> <02D9>
+<60> <2018>
+<7D> <02DD>
+<7E> <007E>
+<7F> <00A8>
+endbfchar
+endcmap
+CMapName currentdict /CMap defineresource pop
+end
+end
+%%EndResource
+%%EOF
+    }\endgroup
+  \expandafter\edef\csname cmapOT1IT\endcsname#1{%
+    \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
+  }%
+%
+% \cmapOT1TT
+  \begingroup
+    \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
+    \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
+%%DocumentNeededResources: ProcSet (CIDInit)
+%%IncludeResource: ProcSet (CIDInit)
+%%BeginResource: CMap (TeX-OT1TT-0)
+%%Title: (TeX-OT1TT-0 TeX OT1TT 0)
+%%Version: 1.000
+%%EndComments
+/CIDInit /ProcSet findresource begin
+12 dict begin
+begincmap
+/CIDSystemInfo
+<< /Registry (TeX)
+/Ordering (OT1TT)
+/Supplement 0
+>> def
+/CMapName /TeX-OT1TT-0 def
+/CMapType 2 def
+1 begincodespacerange
+<00> <7F>
+endcodespacerange
+5 beginbfrange
+<00> <01> <0393>
+<09> <0A> <03A8>
+<21> <26> <0021>
+<28> <5F> <0028>
+<61> <7E> <0061>
+endbfrange
+32 beginbfchar
+<02> <0398>
+<03> <039B>
+<04> <039E>
+<05> <03A0>
+<06> <03A3>
+<07> <03D2>
+<08> <03A6>
+<0B> <2191>
+<0C> <2193>
+<0D> <0027>
+<0E> <00A1>
+<0F> <00BF>
+<10> <0131>
+<11> <0237>
+<12> <0060>
+<13> <00B4>
+<14> <02C7>
+<15> <02D8>
+<16> <00AF>
+<17> <02DA>
+<18> <00B8>
+<19> <00DF>
+<1A> <00E6>
+<1B> <0153>
+<1C> <00F8>
+<1D> <00C6>
+<1E> <0152>
+<1F> <00D8>
+<20> <2423>
+<27> <2019>
+<60> <2018>
+<7F> <00A8>
+endbfchar
+endcmap
+CMapName currentdict /CMap defineresource pop
+end
+end
+%%EndResource
+%%EOF
+    }\endgroup
+  \expandafter\edef\csname cmapOT1TT\endcsname#1{%
+    \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
+  }%
+\fi\fi
+
+
+% Set the font macro #1 to the font named \fontprefix#2.
+% #3 is the font's design size, #4 is a scale factor, #5 is the CMap
+% encoding (only OT1, OT1IT and OT1TT are allowed, or empty to omit).
+% Example:
+% #1 = \textrm
+% #2 = \rmshape
+% #3 = 10
+% #4 = \mainmagstep
+% #5 = OT1
+%
+\def\setfont#1#2#3#4#5{%
+  \font#1=\fontprefix#2#3 scaled #4
+  \csname cmap#5\endcsname#1%
+}
+% This is what gets called when #5 of \setfont is empty.
+\let\cmap\gobble
+%
+% (end of cmaps)
 
 % Use cm as the default font prefix.
 % To specify the font prefix, you must define \fontprefix
 % before you read in texinfo.tex.
-\ifx\fontprefix\undefined
+\ifx\fontprefix\thisisundefined
 \def\fontprefix{cm}
 \fi
 % Support font families that don't use the same naming scheme as CM.
 \def\rmshape{r}
-\def\rmbshape{bx}               %where the normal face is bold
+\def\rmbshape{bx}               % where the normal face is bold
 \def\bfshape{b}
 \def\bxshape{bx}
 \def\ttshape{tt}
@@ -1530,118 +1800,291 @@
 \def\scshape{csc}
 \def\scbshape{csc}
 
+% Definitions for a main text size of 11pt.  (The default in Texinfo.)
+%
+\def\definetextfontsizexi{%
 % Text fonts (11.2pt, magstep1).
 \def\textnominalsize{11pt}
 \edef\mainmagstep{\magstephalf}
-\setfont\textrm\rmshape{10}{\mainmagstep}
-\setfont\texttt\ttshape{10}{\mainmagstep}
-\setfont\textbf\bfshape{10}{\mainmagstep}
-\setfont\textit\itshape{10}{\mainmagstep}
-\setfont\textsl\slshape{10}{\mainmagstep}
-\setfont\textsf\sfshape{10}{\mainmagstep}
-\setfont\textsc\scshape{10}{\mainmagstep}
-\setfont\textttsl\ttslshape{10}{\mainmagstep}
+\setfont\textrm\rmshape{10}{\mainmagstep}{OT1}
+\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT}
+\setfont\textbf\bfshape{10}{\mainmagstep}{OT1}
+\setfont\textit\itshape{10}{\mainmagstep}{OT1IT}
+\setfont\textsl\slshape{10}{\mainmagstep}{OT1}
+\setfont\textsf\sfshape{10}{\mainmagstep}{OT1}
+\setfont\textsc\scshape{10}{\mainmagstep}{OT1}
+\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT}
 \font\texti=cmmi10 scaled \mainmagstep
 \font\textsy=cmsy10 scaled \mainmagstep
+\def\textecsize{1095}
 
 % A few fonts for @defun names and args.
-\setfont\defbf\bfshape{10}{\magstep1}
-\setfont\deftt\ttshape{10}{\magstep1}
-\setfont\defttsl\ttslshape{10}{\magstep1}
+\setfont\defbf\bfshape{10}{\magstep1}{OT1}
+\setfont\deftt\ttshape{10}{\magstep1}{OT1TT}
+\setfont\defttsl\ttslshape{10}{\magstep1}{OT1TT}
 \def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
 
 % Fonts for indices, footnotes, small examples (9pt).
 \def\smallnominalsize{9pt}
-\setfont\smallrm\rmshape{9}{1000}
-\setfont\smalltt\ttshape{9}{1000}
-\setfont\smallbf\bfshape{10}{900}
-\setfont\smallit\itshape{9}{1000}
-\setfont\smallsl\slshape{9}{1000}
-\setfont\smallsf\sfshape{9}{1000}
-\setfont\smallsc\scshape{10}{900}
-\setfont\smallttsl\ttslshape{10}{900}
+\setfont\smallrm\rmshape{9}{1000}{OT1}
+\setfont\smalltt\ttshape{9}{1000}{OT1TT}
+\setfont\smallbf\bfshape{10}{900}{OT1}
+\setfont\smallit\itshape{9}{1000}{OT1IT}
+\setfont\smallsl\slshape{9}{1000}{OT1}
+\setfont\smallsf\sfshape{9}{1000}{OT1}
+\setfont\smallsc\scshape{10}{900}{OT1}
+\setfont\smallttsl\ttslshape{10}{900}{OT1TT}
 \font\smalli=cmmi9
 \font\smallsy=cmsy9
+\def\smallecsize{0900}
 
 % Fonts for small examples (8pt).
 \def\smallernominalsize{8pt}
-\setfont\smallerrm\rmshape{8}{1000}
-\setfont\smallertt\ttshape{8}{1000}
-\setfont\smallerbf\bfshape{10}{800}
-\setfont\smallerit\itshape{8}{1000}
-\setfont\smallersl\slshape{8}{1000}
-\setfont\smallersf\sfshape{8}{1000}
-\setfont\smallersc\scshape{10}{800}
-\setfont\smallerttsl\ttslshape{10}{800}
+\setfont\smallerrm\rmshape{8}{1000}{OT1}
+\setfont\smallertt\ttshape{8}{1000}{OT1TT}
+\setfont\smallerbf\bfshape{10}{800}{OT1}
+\setfont\smallerit\itshape{8}{1000}{OT1IT}
+\setfont\smallersl\slshape{8}{1000}{OT1}
+\setfont\smallersf\sfshape{8}{1000}{OT1}
+\setfont\smallersc\scshape{10}{800}{OT1}
+\setfont\smallerttsl\ttslshape{10}{800}{OT1TT}
 \font\smalleri=cmmi8
 \font\smallersy=cmsy8
+\def\smallerecsize{0800}
 
 % Fonts for title page (20.4pt):
 \def\titlenominalsize{20pt}
-\setfont\titlerm\rmbshape{12}{\magstep3}
-\setfont\titleit\itbshape{10}{\magstep4}
-\setfont\titlesl\slbshape{10}{\magstep4}
-\setfont\titlett\ttbshape{12}{\magstep3}
-\setfont\titlettsl\ttslshape{10}{\magstep4}
-\setfont\titlesf\sfbshape{17}{\magstep1}
+\setfont\titlerm\rmbshape{12}{\magstep3}{OT1}
+\setfont\titleit\itbshape{10}{\magstep4}{OT1IT}
+\setfont\titlesl\slbshape{10}{\magstep4}{OT1}
+\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT}
+\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT}
+\setfont\titlesf\sfbshape{17}{\magstep1}{OT1}
 \let\titlebf=\titlerm
-\setfont\titlesc\scbshape{10}{\magstep4}
+\setfont\titlesc\scbshape{10}{\magstep4}{OT1}
 \font\titlei=cmmi12 scaled \magstep3
 \font\titlesy=cmsy10 scaled \magstep4
-\def\authorrm{\secrm}
-\def\authortt{\sectt}
+\def\titleecsize{2074}
 
 % Chapter (and unnumbered) fonts (17.28pt).
 \def\chapnominalsize{17pt}
-\setfont\chaprm\rmbshape{12}{\magstep2}
-\setfont\chapit\itbshape{10}{\magstep3}
-\setfont\chapsl\slbshape{10}{\magstep3}
-\setfont\chaptt\ttbshape{12}{\magstep2}
-\setfont\chapttsl\ttslshape{10}{\magstep3}
-\setfont\chapsf\sfbshape{17}{1000}
+\setfont\chaprm\rmbshape{12}{\magstep2}{OT1}
+\setfont\chapit\itbshape{10}{\magstep3}{OT1IT}
+\setfont\chapsl\slbshape{10}{\magstep3}{OT1}
+\setfont\chaptt\ttbshape{12}{\magstep2}{OT1TT}
+\setfont\chapttsl\ttslshape{10}{\magstep3}{OT1TT}
+\setfont\chapsf\sfbshape{17}{1000}{OT1}
 \let\chapbf=\chaprm
-\setfont\chapsc\scbshape{10}{\magstep3}
+\setfont\chapsc\scbshape{10}{\magstep3}{OT1}
 \font\chapi=cmmi12 scaled \magstep2
 \font\chapsy=cmsy10 scaled \magstep3
+\def\chapecsize{1728}
 
 % Section fonts (14.4pt).
 \def\secnominalsize{14pt}
-\setfont\secrm\rmbshape{12}{\magstep1}
-\setfont\secit\itbshape{10}{\magstep2}
-\setfont\secsl\slbshape{10}{\magstep2}
-\setfont\sectt\ttbshape{12}{\magstep1}
-\setfont\secttsl\ttslshape{10}{\magstep2}
-\setfont\secsf\sfbshape{12}{\magstep1}
+\setfont\secrm\rmbshape{12}{\magstep1}{OT1}
+\setfont\secit\itbshape{10}{\magstep2}{OT1IT}
+\setfont\secsl\slbshape{10}{\magstep2}{OT1}
+\setfont\sectt\ttbshape{12}{\magstep1}{OT1TT}
+\setfont\secttsl\ttslshape{10}{\magstep2}{OT1TT}
+\setfont\secsf\sfbshape{12}{\magstep1}{OT1}
 \let\secbf\secrm
-\setfont\secsc\scbshape{10}{\magstep2}
+\setfont\secsc\scbshape{10}{\magstep2}{OT1}
 \font\seci=cmmi12 scaled \magstep1
 \font\secsy=cmsy10 scaled \magstep2
+\def\sececsize{1440}
 
 % Subsection fonts (13.15pt).
 \def\ssecnominalsize{13pt}
-\setfont\ssecrm\rmbshape{12}{\magstephalf}
-\setfont\ssecit\itbshape{10}{1315}
-\setfont\ssecsl\slbshape{10}{1315}
-\setfont\ssectt\ttbshape{12}{\magstephalf}
-\setfont\ssecttsl\ttslshape{10}{1315}
-\setfont\ssecsf\sfbshape{12}{\magstephalf}
+\setfont\ssecrm\rmbshape{12}{\magstephalf}{OT1}
+\setfont\ssecit\itbshape{10}{1315}{OT1IT}
+\setfont\ssecsl\slbshape{10}{1315}{OT1}
+\setfont\ssectt\ttbshape{12}{\magstephalf}{OT1TT}
+\setfont\ssecttsl\ttslshape{10}{1315}{OT1TT}
+\setfont\ssecsf\sfbshape{12}{\magstephalf}{OT1}
 \let\ssecbf\ssecrm
-\setfont\ssecsc\scbshape{10}{1315}
+\setfont\ssecsc\scbshape{10}{1315}{OT1}
 \font\sseci=cmmi12 scaled \magstephalf
 \font\ssecsy=cmsy10 scaled 1315
+\def\ssececsize{1200}
 
 % Reduced fonts for @acro in text (10pt).
 \def\reducednominalsize{10pt}
-\setfont\reducedrm\rmshape{10}{1000}
-\setfont\reducedtt\ttshape{10}{1000}
-\setfont\reducedbf\bfshape{10}{1000}
-\setfont\reducedit\itshape{10}{1000}
-\setfont\reducedsl\slshape{10}{1000}
-\setfont\reducedsf\sfshape{10}{1000}
-\setfont\reducedsc\scshape{10}{1000}
-\setfont\reducedttsl\ttslshape{10}{1000}
+\setfont\reducedrm\rmshape{10}{1000}{OT1}
+\setfont\reducedtt\ttshape{10}{1000}{OT1TT}
+\setfont\reducedbf\bfshape{10}{1000}{OT1}
+\setfont\reducedit\itshape{10}{1000}{OT1IT}
+\setfont\reducedsl\slshape{10}{1000}{OT1}
+\setfont\reducedsf\sfshape{10}{1000}{OT1}
+\setfont\reducedsc\scshape{10}{1000}{OT1}
+\setfont\reducedttsl\ttslshape{10}{1000}{OT1TT}
 \font\reducedi=cmmi10
 \font\reducedsy=cmsy10
+\def\reducedecsize{1000}
+
+\textleading = 13.2pt % line spacing for 11pt CM
+\textfonts            % reset the current fonts
+\rm
+} % end of 11pt text font size definitions, \definetextfontsizexi
+
+
+% Definitions to make the main text be 10pt Computer Modern, with
+% section, chapter, etc., sizes following suit.  This is for the GNU
+% Press printing of the Emacs 22 manual.  Maybe other manuals in the
+% future.  Used with @smallbook, which sets the leading to 12pt.
+%
+\def\definetextfontsizex{%
+% Text fonts (10pt).
+\def\textnominalsize{10pt}
+\edef\mainmagstep{1000}
+\setfont\textrm\rmshape{10}{\mainmagstep}{OT1}
+\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT}
+\setfont\textbf\bfshape{10}{\mainmagstep}{OT1}
+\setfont\textit\itshape{10}{\mainmagstep}{OT1IT}
+\setfont\textsl\slshape{10}{\mainmagstep}{OT1}
+\setfont\textsf\sfshape{10}{\mainmagstep}{OT1}
+\setfont\textsc\scshape{10}{\mainmagstep}{OT1}
+\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT}
+\font\texti=cmmi10 scaled \mainmagstep
+\font\textsy=cmsy10 scaled \mainmagstep
+\def\textecsize{1000}
+
+% A few fonts for @defun names and args.
+\setfont\defbf\bfshape{10}{\magstephalf}{OT1}
+\setfont\deftt\ttshape{10}{\magstephalf}{OT1TT}
+\setfont\defttsl\ttslshape{10}{\magstephalf}{OT1TT}
+\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
+
+% Fonts for indices, footnotes, small examples (9pt).
+\def\smallnominalsize{9pt}
+\setfont\smallrm\rmshape{9}{1000}{OT1}
+\setfont\smalltt\ttshape{9}{1000}{OT1TT}
+\setfont\smallbf\bfshape{10}{900}{OT1}
+\setfont\smallit\itshape{9}{1000}{OT1IT}
+\setfont\smallsl\slshape{9}{1000}{OT1}
+\setfont\smallsf\sfshape{9}{1000}{OT1}
+\setfont\smallsc\scshape{10}{900}{OT1}
+\setfont\smallttsl\ttslshape{10}{900}{OT1TT}
+\font\smalli=cmmi9
+\font\smallsy=cmsy9
+\def\smallecsize{0900}
+
+% Fonts for small examples (8pt).
+\def\smallernominalsize{8pt}
+\setfont\smallerrm\rmshape{8}{1000}{OT1}
+\setfont\smallertt\ttshape{8}{1000}{OT1TT}
+\setfont\smallerbf\bfshape{10}{800}{OT1}
+\setfont\smallerit\itshape{8}{1000}{OT1IT}
+\setfont\smallersl\slshape{8}{1000}{OT1}
+\setfont\smallersf\sfshape{8}{1000}{OT1}
+\setfont\smallersc\scshape{10}{800}{OT1}
+\setfont\smallerttsl\ttslshape{10}{800}{OT1TT}
+\font\smalleri=cmmi8
+\font\smallersy=cmsy8
+\def\smallerecsize{0800}
+
+% Fonts for title page (20.4pt):
+\def\titlenominalsize{20pt}
+\setfont\titlerm\rmbshape{12}{\magstep3}{OT1}
+\setfont\titleit\itbshape{10}{\magstep4}{OT1IT}
+\setfont\titlesl\slbshape{10}{\magstep4}{OT1}
+\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT}
+\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT}
+\setfont\titlesf\sfbshape{17}{\magstep1}{OT1}
+\let\titlebf=\titlerm
+\setfont\titlesc\scbshape{10}{\magstep4}{OT1}
+\font\titlei=cmmi12 scaled \magstep3
+\font\titlesy=cmsy10 scaled \magstep4
+\def\titleecsize{2074}
+
+% Chapter fonts (14.4pt).
+\def\chapnominalsize{14pt}
+\setfont\chaprm\rmbshape{12}{\magstep1}{OT1}
+\setfont\chapit\itbshape{10}{\magstep2}{OT1IT}
+\setfont\chapsl\slbshape{10}{\magstep2}{OT1}
+\setfont\chaptt\ttbshape{12}{\magstep1}{OT1TT}
+\setfont\chapttsl\ttslshape{10}{\magstep2}{OT1TT}
+\setfont\chapsf\sfbshape{12}{\magstep1}{OT1}
+\let\chapbf\chaprm
+\setfont\chapsc\scbshape{10}{\magstep2}{OT1}
+\font\chapi=cmmi12 scaled \magstep1
+\font\chapsy=cmsy10 scaled \magstep2
+\def\chapecsize{1440}
+
+% Section fonts (12pt).
+\def\secnominalsize{12pt}
+\setfont\secrm\rmbshape{12}{1000}{OT1}
+\setfont\secit\itbshape{10}{\magstep1}{OT1IT}
+\setfont\secsl\slbshape{10}{\magstep1}{OT1}
+\setfont\sectt\ttbshape{12}{1000}{OT1TT}
+\setfont\secttsl\ttslshape{10}{\magstep1}{OT1TT}
+\setfont\secsf\sfbshape{12}{1000}{OT1}
+\let\secbf\secrm
+\setfont\secsc\scbshape{10}{\magstep1}{OT1}
+\font\seci=cmmi12
+\font\secsy=cmsy10 scaled \magstep1
+\def\sececsize{1200}
+
+% Subsection fonts (10pt).
+\def\ssecnominalsize{10pt}
+\setfont\ssecrm\rmbshape{10}{1000}{OT1}
+\setfont\ssecit\itbshape{10}{1000}{OT1IT}
+\setfont\ssecsl\slbshape{10}{1000}{OT1}
+\setfont\ssectt\ttbshape{10}{1000}{OT1TT}
+\setfont\ssecttsl\ttslshape{10}{1000}{OT1TT}
+\setfont\ssecsf\sfbshape{10}{1000}{OT1}
+\let\ssecbf\ssecrm
+\setfont\ssecsc\scbshape{10}{1000}{OT1}
+\font\sseci=cmmi10
+\font\ssecsy=cmsy10
+\def\ssececsize{1000}
+
+% Reduced fonts for @acro in text (9pt).
+\def\reducednominalsize{9pt}
+\setfont\reducedrm\rmshape{9}{1000}{OT1}
+\setfont\reducedtt\ttshape{9}{1000}{OT1TT}
+\setfont\reducedbf\bfshape{10}{900}{OT1}
+\setfont\reducedit\itshape{9}{1000}{OT1IT}
+\setfont\reducedsl\slshape{9}{1000}{OT1}
+\setfont\reducedsf\sfshape{9}{1000}{OT1}
+\setfont\reducedsc\scshape{10}{900}{OT1}
+\setfont\reducedttsl\ttslshape{10}{900}{OT1TT}
+\font\reducedi=cmmi9
+\font\reducedsy=cmsy9
+\def\reducedecsize{0900}
+
+\divide\parskip by 2  % reduce space between paragraphs
+\textleading = 12pt   % line spacing for 10pt CM
+\textfonts            % reset the current fonts
+\rm
+} % end of 10pt text font size definitions, \definetextfontsizex
+
+
+% We provide the user-level command
+%   @fonttextsize 10
+% (or 11) to redefine the text font size.  pt is assumed.
+%
+\def\xiword{11}
+\def\xword{10}
+\def\xwordpt{10pt}
+%
+\parseargdef\fonttextsize{%
+  \def\textsizearg{#1}%
+  %\wlog{doing @fonttextsize \textsizearg}%
+  %
+  % Set \globaldefs so that documents can use this inside @tex, since
+  % makeinfo 4.8 does not support it, but we need it nonetheless.
+  %
+ \begingroup \globaldefs=1
+  \ifx\textsizearg\xword \definetextfontsizex
+  \else \ifx\textsizearg\xiword \definetextfontsizexi
+  \else
+    \errhelp=\EMsimple
+    \errmessage{@fonttextsize only supports `10' or `11', not `\textsizearg'}
+  \fi\fi
+ \endgroup
+}
+
 
 % In order for the font changes to affect most math symbols and letters,
 % we have to define the \textfont of the standard families.  Since
@@ -1681,8 +2124,8 @@
   \let\tenttsl=\titlettsl
   \def\curfontsize{title}%
   \def\lsize{chap}\def\lllsize{subsec}%
-  \resetmathfonts \setleading{25pt}}
-\def\titlefont#1{{\titlefonts\rm #1}}
+  \resetmathfonts \setleading{27pt}}
+\def\titlefont#1{{\titlefonts\rmisbold #1}}
 \def\chapfonts{%
   \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
   \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
@@ -1733,6 +2176,16 @@
   \def\lsize{smaller}\def\lllsize{smaller}%
   \resetmathfonts \setleading{9.5pt}}
 
+% Fonts for short table of contents.
+\setfont\shortcontrm\rmshape{12}{1000}{OT1}
+\setfont\shortcontbf\bfshape{10}{\magstep1}{OT1}  % no cmb12
+\setfont\shortcontsl\slshape{12}{1000}{OT1}
+\setfont\shortconttt\ttshape{12}{1000}{OT1TT}
+
+% Define these just so they can be easily changed for other fonts.
+\def\angleleft{$\langle$}
+\def\angleright{$\rangle$}
+
 % Set the fonts to use with the @small... environments.
 \let\smallexamplefonts = \smallfonts
 
@@ -1746,53 +2199,215 @@
 %
 % By the way, for comparison, here's what fits with @example (10pt):
 %   8.5x11=71  smallbook=60  a4=75  a5=58
-%
-% I wish the USA used A4 paper.
 % --karl, 24jan03.
 
-
 % Set up the default fonts, so we can use them for creating boxes.
 %
-\textfonts \rm
+\definetextfontsizexi
 
-% Define these so they can be easily changed for other fonts.
-\def\angleleft{$\langle$}
-\def\angleright{$\rangle$}
+
+\message{markup,}
+
+% Check if we are currently using a typewriter font.  Since all the
+% Computer Modern typewriter fonts have zero interword stretch (and
+% shrink), and it is reasonable to expect all typewriter fonts to have
+% this property, we can check that font parameter.
+%
+\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
+
+% Markup style infrastructure.  \defmarkupstylesetup\INITMACRO will
+% define and register \INITMACRO to be called on markup style changes.
+% \INITMACRO can check \currentmarkupstyle for the innermost
+% style and the set of \ifmarkupSTYLE switches for all styles
+% currently in effect.
+\newif\ifmarkupvar
+\newif\ifmarkupsamp
+\newif\ifmarkupkey
+%\newif\ifmarkupfile % @file == @samp.
+%\newif\ifmarkupoption % @option == @samp.
+\newif\ifmarkupcode
+\newif\ifmarkupkbd
+%\newif\ifmarkupenv % @env == @code.
+%\newif\ifmarkupcommand % @command == @code.
+\newif\ifmarkuptex % @tex (and part of @math, for now).
+\newif\ifmarkupexample
+\newif\ifmarkupverb
+\newif\ifmarkupverbatim
+
+\let\currentmarkupstyle\empty
+
+\def\setupmarkupstyle#1{%
+  \csname markup#1true\endcsname
+  \def\currentmarkupstyle{#1}%
+  \markupstylesetup
+}
+
+\let\markupstylesetup\empty
+
+\def\defmarkupstylesetup#1{%
+  \expandafter\def\expandafter\markupstylesetup
+    \expandafter{\markupstylesetup #1}%
+  \def#1%
+}
+
+% Markup style setup for left and right quotes.
+\defmarkupstylesetup\markupsetuplq{%
+  \expandafter\let\expandafter \temp
+    \csname markupsetuplq\currentmarkupstyle\endcsname
+  \ifx\temp\relax \markupsetuplqdefault \else \temp \fi
+}
+
+\defmarkupstylesetup\markupsetuprq{%
+  \expandafter\let\expandafter \temp
+    \csname markupsetuprq\currentmarkupstyle\endcsname
+  \ifx\temp\relax \markupsetuprqdefault \else \temp \fi
+}
+
+{
+\catcode`\'=\active
+\catcode`\`=\active
+
+\gdef\markupsetuplqdefault{\let`\lq}
+\gdef\markupsetuprqdefault{\let'\rq}
+
+\gdef\markupsetcodequoteleft{\let`\codequoteleft}
+\gdef\markupsetcodequoteright{\let'\codequoteright}
+
+\gdef\markupsetnoligaturesquoteleft{\let`\noligaturesquoteleft}
+}
+
+\let\markupsetuplqcode \markupsetcodequoteleft
+\let\markupsetuprqcode \markupsetcodequoteright
+%
+\let\markupsetuplqexample \markupsetcodequoteleft
+\let\markupsetuprqexample \markupsetcodequoteright
+%
+\let\markupsetuplqsamp \markupsetcodequoteleft
+\let\markupsetuprqsamp \markupsetcodequoteright
+%
+\let\markupsetuplqverb \markupsetcodequoteleft
+\let\markupsetuprqverb \markupsetcodequoteright
+%
+\let\markupsetuplqverbatim \markupsetcodequoteleft
+\let\markupsetuprqverbatim \markupsetcodequoteright
+
+\let\markupsetuplqkbd \markupsetnoligaturesquoteleft
+
+% Allow an option to not use regular directed right quote/apostrophe
+% (char 0x27), but instead the undirected quote from cmtt (char 0x0d).
+% The undirected quote is ugly, so don't make it the default, but it
+% works for pasting with more pdf viewers (at least evince), the
+% lilypond developers report.  xpdf does work with the regular 0x27.
+%
+\def\codequoteright{%
+  \expandafter\ifx\csname SETtxicodequoteundirected\endcsname\relax
+    \expandafter\ifx\csname SETcodequoteundirected\endcsname\relax
+      '%
+    \else \char'15 \fi
+  \else \char'15 \fi
+}
+%
+% and a similar option for the left quote char vs. a grave accent.
+% Modern fonts display ASCII 0x60 as a grave accent, so some people like
+% the code environments to do likewise.
+%
+\def\codequoteleft{%
+  \expandafter\ifx\csname SETtxicodequotebacktick\endcsname\relax
+    \expandafter\ifx\csname SETcodequotebacktick\endcsname\relax
+      % [Knuth] pp. 380,381,391
+      % \relax disables Spanish ligatures ?` and !` of \tt font.
+      \relax`%
+    \else \char'22 \fi
+  \else \char'22 \fi
+}
+
+% Commands to set the quote options.
+% 
+\parseargdef\codequoteundirected{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETtxicodequoteundirected\endcsname
+      = t%
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETtxicodequoteundirected\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @codequoteundirected value `\temp', must be on|off}%
+  \fi\fi
+}
+%
+\parseargdef\codequotebacktick{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETtxicodequotebacktick\endcsname
+      = t%
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETtxicodequotebacktick\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @codequotebacktick value `\temp', must be on|off}%
+  \fi\fi
+}
+
+% [Knuth] pp. 380,381,391, disable Spanish ligatures ?` and !` of \tt font.
+\def\noligaturesquoteleft{\relax\lq}
 
 % Count depth in font-changes, for error checks
 \newcount\fontdepth \fontdepth=0
 
-% Fonts for short table of contents.
-\setfont\shortcontrm\rmshape{12}{1000}
-\setfont\shortcontbf\bfshape{10}{\magstep1}  % no cmb12
-\setfont\shortcontsl\slshape{12}{1000}
-\setfont\shortconttt\ttshape{12}{1000}
+% Font commands.
 
-%% Add scribe-like font environments, plus @l for inline lisp (usually sans
-%% serif) and @ii for TeX italic
+% #1 is the font command (\sl or \it), #2 is the text to slant.
+% If we are in a monospaced environment, however, 1) always use \ttsl,
+% and 2) do not add an italic correction.
+\def\dosmartslant#1#2{%
+  \ifusingtt 
+    {{\ttsl #2}\let\next=\relax}%
+    {\def\next{{#1#2}\futurelet\next\smartitaliccorrection}}%
+  \next
+}
+\def\smartslanted{\dosmartslant\sl}
+\def\smartitalic{\dosmartslant\it}
 
-% \smartitalic{ARG} outputs arg in italics, followed by an italic correction
-% unless the following character is such as not to need one.
-\def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else
-                    \ptexslash\fi\fi\fi}
-\def\smartslanted#1{{\ifusingtt\ttsl\sl #1}\futurelet\next\smartitalicx}
-\def\smartitalic#1{{\ifusingtt\ttsl\it #1}\futurelet\next\smartitalicx}
+% Output an italic correction unless \next (presumed to be the following
+% character) is such as not to need one.
+\def\smartitaliccorrection{%
+  \ifx\next,%
+  \else\ifx\next-%
+  \else\ifx\next.%
+  \else\ptexslash
+  \fi\fi\fi
+  \aftersmartic
+}
 
-% like \smartslanted except unconditionally uses \ttsl.
+% like \smartslanted except unconditionally uses \ttsl, and no ic.
 % @var is set to this for defun arguments.
-\def\ttslanted#1{{\ttsl #1}\futurelet\next\smartitalicx}
+\def\ttslanted#1{{\ttsl #1}}
 
-% like \smartslanted except unconditionally use \sl.  We never want
+% @cite is like \smartslanted except unconditionally use \sl.  We never want
 % ttsl for book titles, do we?
-\def\cite#1{{\sl #1}\futurelet\next\smartitalicx}
+\def\cite#1{{\sl #1}\futurelet\next\smartitaliccorrection}
+
+\def\aftersmartic{}
+\def\var#1{%
+  \let\saveaftersmartic = \aftersmartic
+  \def\aftersmartic{\null\let\aftersmartic=\saveaftersmartic}%
+  \smartslanted{#1}%
+}
 
 \let\i=\smartitalic
 \let\slanted=\smartslanted
-\let\var=\smartslanted
 \let\dfn=\smartslanted
 \let\emph=\smartitalic
 
-% @b, explicit bold.
+% Explicit font changes: @r, @sc, undocumented @ii.
+\def\r#1{{\rm #1}}              % roman font
+\def\sc#1{{\smallcaps#1}}       % smallcaps font
+\def\ii#1{{\it #1}}             % italic font
+
+% @b, explicit bold.  Also @strong.
 \def\b#1{{\bf #1}}
 \let\strong=\b
 
@@ -1824,21 +2439,35 @@
 \catcode`@=\other
 \def\endofsentencespacefactor{3000}% default
 
+% @t, explicit typewriter.
 \def\t#1{%
   {\tt \rawbackslash \plainfrenchspacing #1}%
   \null
 }
-\def\samp#1{`\tclose{#1}'\null}
-\setfont\keyrm\rmshape{8}{1000}
-\font\keysy=cmsy9
-\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
-  \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
-    \vbox{\hrule\kern-0.4pt
-     \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
-    \kern-0.4pt\hrule}%
-  \kern-.06em\raise0.4pt\hbox{\angleright}}}}
-% The old definition, with no lozenge:
-%\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null}
+
+% @samp.
+\def\samp#1{{\setupmarkupstyle{samp}\lq\tclose{#1}\rq\null}}
+
+% definition of @key that produces a lozenge.  Doesn't adjust to text size.
+%\setfont\keyrm\rmshape{8}{1000}{OT1}
+%\font\keysy=cmsy9
+%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
+%  \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
+%    \vbox{\hrule\kern-0.4pt
+%     \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
+%    \kern-0.4pt\hrule}%
+%  \kern-.06em\raise0.4pt\hbox{\angleright}}}}
+
+% definition of @key with no lozenge.  If the current font is already
+% monospace, don't change it; that way, we respect @kbdinputstyle.  But
+% if it isn't monospace, then use \tt.
+%
+\def\key#1{{\setupmarkupstyle{key}%
+  \nohyphenation
+  \ifmonospace\else\tt\fi
+  #1}\null}
+
+% ctrl is no longer a Texinfo command.
 \def\ctrl #1{{\tt \rawbackslash \hat}#1}
 
 % @file, @option are the same as @samp.
@@ -1865,7 +2494,7 @@
     \plainfrenchspacing
     #1%
   }%
-  \null
+  \null % reset spacefactor to 1000
 }
 
 % We *must* turn on hyphenation at `-' and `_' in @code.
@@ -1878,11 +2507,14 @@
 % and arrange explicitly to hyphenate at a dash.
 %  -- rms.
 {
-  \catcode`\-=\active
-  \catcode`\_=\active
+  \catcode`\-=\active \catcode`\_=\active
+  \catcode`\'=\active \catcode`\`=\active
+  \global\let'=\rq \global\let`=\lq  % default definitions
   %
   \global\def\code{\begingroup
-    \catcode`\-=\active  \catcode`\_=\active
+    \setupmarkupstyle{code}%
+    % The following should really be moved into \setupmarkupstyle handlers.
+    \catcode\dashChar=\active  \catcode\underChar=\active
     \ifallowcodebreaks
      \let-\codedash
      \let_\codeunder
@@ -1894,6 +2526,8 @@
   }
 }
 
+\def\codex #1{\tclose{#1}\endgroup}
+
 \def\realdash{-}
 \def\codedash{-\discretionary{}{}{}}
 \def\codeunder{%
@@ -1907,13 +2541,12 @@
              \discretionary{}{}{}}%
             {\_}%
 }
-\def\codex #1{\tclose{#1}\endgroup}
 
 % An additional complication: the above will allow breaks after, e.g.,
 % each of the four underscores in __typeof__.  This is undesirable in
 % some manuals, especially if they don't have long identifiers in
 % general.  @allowcodebreaks provides a way to control this.
-% 
+%
 \newif\ifallowcodebreaks  \allowcodebreakstrue
 
 \def\keywordtrue{true}
@@ -1927,55 +2560,18 @@
     \allowcodebreaksfalse
   \else
     \errhelp = \EMsimple
-    \errmessage{Unknown @allowcodebreaks option `\txiarg'}%
+    \errmessage{Unknown @allowcodebreaks option `\txiarg', must be true|false}%
   \fi\fi
 }
 
-% @kbd is like @code, except that if the argument is just one @key command,
-% then @kbd has no effect.
-
-% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
-%   `example' (@kbd uses ttsl only inside of @example and friends),
-%   or `code' (@kbd uses normal tty font always).
-\parseargdef\kbdinputstyle{%
-  \def\txiarg{#1}%
-  \ifx\txiarg\worddistinct
-    \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
-  \else\ifx\txiarg\wordexample
-    \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
-  \else\ifx\txiarg\wordcode
-    \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
-  \else
-    \errhelp = \EMsimple
-    \errmessage{Unknown @kbdinputstyle option `\txiarg'}%
-  \fi\fi\fi
-}
-\def\worddistinct{distinct}
-\def\wordexample{example}
-\def\wordcode{code}
-
-% Default is `distinct.'
-\kbdinputstyle distinct
-
-\def\xkey{\key}
-\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
-\ifx\one\xkey\ifx\threex\three \key{#2}%
-\else{\tclose{\kbdfont\look}}\fi
-\else{\tclose{\kbdfont\look}}\fi}
-
-% For @indicateurl, @env, @command quotes seem unnecessary, so use \code.
-\let\indicateurl=\code
-\let\env=\code
-\let\command=\code
-
 % @uref (abbreviation for `urlref') takes an optional (comma-separated)
 % second argument specifying the text to display and an optional third
 % arg as text to display instead of (rather than in addition to) the url
-% itself.  First (mandatory) arg is the url.  Perhaps eventually put in
-% a hypertex \special here.
-%
-\def\uref#1{\douref #1,,,\finish}
-\def\douref#1,#2,#3,#4\finish{\begingroup
+% itself.  First (mandatory) arg is the url.
+% (This \urefnobreak definition isn't used now, leaving it for a while
+% for comparison.)
+\def\urefnobreak#1{\dourefnobreak #1,,,\finish}
+\def\dourefnobreak#1,#2,#3,#4\finish{\begingroup
   \unsepspaces
   \pdfurl{#1}%
   \setbox0 = \hbox{\ignorespaces #3}%
@@ -1996,6 +2592,103 @@
   \endlink
 \endgroup}
 
+% This \urefbreak definition is the active one.
+\def\urefbreak{\begingroup \urefcatcodes \dourefbreak}
+\let\uref=\urefbreak
+\def\dourefbreak#1{\urefbreakfinish #1,,,\finish}
+\def\urefbreakfinish#1,#2,#3,#4\finish{% doesn't work in @example
+  \unsepspaces
+  \pdfurl{#1}%
+  \setbox0 = \hbox{\ignorespaces #3}%
+  \ifdim\wd0 > 0pt
+    \unhbox0 % third arg given, show only that
+  \else
+    \setbox0 = \hbox{\ignorespaces #2}%
+    \ifdim\wd0 > 0pt
+      \ifpdf
+        \unhbox0             % PDF: 2nd arg given, show only it
+      \else
+        \unhbox0\ (\urefcode{#1})% DVI: 2nd arg given, show both it and url
+      \fi
+    \else
+      \urefcode{#1}% only url given, so show it
+    \fi
+  \fi
+  \endlink
+\endgroup}
+
+% Allow line breaks around only a few characters (only).
+\def\urefcatcodes{%
+  \catcode\ampChar=\active   \catcode\dotChar=\active
+  \catcode\hashChar=\active  \catcode\questChar=\active
+  \catcode\slashChar=\active
+}
+{
+  \urefcatcodes
+  %
+  \global\def\urefcode{\begingroup
+    \setupmarkupstyle{code}%
+    \urefcatcodes
+    \let&\urefcodeamp
+    \let.\urefcodedot
+    \let#\urefcodehash
+    \let?\urefcodequest
+    \let/\urefcodeslash
+    \codex
+  }
+  %
+  % By default, they are just regular characters.
+  \global\def&{\normalamp}
+  \global\def.{\normaldot}
+  \global\def#{\normalhash}
+  \global\def?{\normalquest}
+  \global\def/{\normalslash}
+}
+
+% we put a little stretch before and after the breakable chars, to help
+% line breaking of long url's.  The unequal skips make look better in
+% cmtt at least, especially for dots.
+\def\urefprestretch{\urefprebreak \hskip0pt plus.13em }
+\def\urefpoststretch{\urefpostbreak \hskip0pt plus.1em }
+%
+\def\urefcodeamp{\urefprestretch \&\urefpoststretch}
+\def\urefcodedot{\urefprestretch .\urefpoststretch}
+\def\urefcodehash{\urefprestretch \#\urefpoststretch}
+\def\urefcodequest{\urefprestretch ?\urefpoststretch}
+\def\urefcodeslash{\futurelet\next\urefcodeslashfinish}
+{
+  \catcode`\/=\active
+  \global\def\urefcodeslashfinish{%
+    \urefprestretch \slashChar
+    % Allow line break only after the final / in a sequence of
+    % slashes, to avoid line break between the slashes in http://.
+    \ifx\next/\else \urefpoststretch \fi
+  }
+}
+
+% One more complication: by default we'll break after the special
+% characters, but some people like to break before the special chars, so
+% allow that.  Also allow no breaking at all, for manual control.
+% 
+\parseargdef\urefbreakstyle{%
+  \def\txiarg{#1}%
+  \ifx\txiarg\wordnone
+    \def\urefprebreak{\nobreak}\def\urefpostbreak{\nobreak}
+  \else\ifx\txiarg\wordbefore
+    \def\urefprebreak{\allowbreak}\def\urefpostbreak{\nobreak}
+  \else\ifx\txiarg\wordafter
+    \def\urefprebreak{\nobreak}\def\urefpostbreak{\allowbreak}
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @urefbreakstyle setting `\txiarg'}%
+  \fi\fi\fi
+}
+\def\wordafter{after}
+\def\wordbefore{before}
+\def\wordnone{none}
+
+\urefbreakstyle after
+
 % @url synonym for @uref, since that's how everyone uses it.
 %
 \let\url=\uref
@@ -2017,34 +2710,65 @@
   \let\email=\uref
 \fi
 
-% Check if we are currently using a typewriter font.  Since all the
-% Computer Modern typewriter fonts have zero interword stretch (and
-% shrink), and it is reasonable to expect all typewriter fonts to have
-% this property, we can check that font parameter.
-%
-\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
+% @kbd is like @code, except that if the argument is just one @key command,
+% then @kbd has no effect.
+\def\kbd#1{{\setupmarkupstyle{kbd}\def\look{#1}\expandafter\kbdfoo\look??\par}}
+
+% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
+%   `example' (@kbd uses ttsl only inside of @example and friends),
+%   or `code' (@kbd uses normal tty font always).
+\parseargdef\kbdinputstyle{%
+  \def\txiarg{#1}%
+  \ifx\txiarg\worddistinct
+    \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
+  \else\ifx\txiarg\wordexample
+    \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
+  \else\ifx\txiarg\wordcode
+    \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @kbdinputstyle setting `\txiarg'}%
+  \fi\fi\fi
+}
+\def\worddistinct{distinct}
+\def\wordexample{example}
+\def\wordcode{code}
+
+% Default is `distinct'.
+\kbdinputstyle distinct
+
+\def\xkey{\key}
+\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
+\ifx\one\xkey\ifx\threex\three \key{#2}%
+\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
+\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi}
+
+% For @indicateurl, @env, @command quotes seem unnecessary, so use \code.
+\let\indicateurl=\code
+\let\env=\code
+\let\command=\code
+
+% @clicksequence{File @click{} Open ...}
+\def\clicksequence#1{\begingroup #1\endgroup}
+
+% @clickstyle @arrow   (by default)
+\parseargdef\clickstyle{\def\click{#1}}
+\def\click{\arrow}
 
 % Typeset a dimension, e.g., `in' or `pt'.  The only reason for the
 % argument is to make the input look right: @dmn{pt} instead of @dmn{}pt.
 %
 \def\dmn#1{\thinspace #1}
 
-\def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par}
-
 % @l was never documented to mean ``switch to the Lisp font'',
 % and it is not used as such in any manual I can find.  We need it for
 % Polish suppressed-l.  --karl, 22sep96.
 %\def\l#1{{\li #1}\null}
 
-% Explicit font changes: @r, @sc, undocumented @ii.
-\def\r#1{{\rm #1}}              % roman font
-\def\sc#1{{\smallcaps#1}}       % smallcaps font
-\def\ii#1{{\it #1}}             % italic font
-
 % @acronym for "FBI", "NATO", and the like.
 % We print this one point size smaller, since it's intended for
 % all-uppercase.
-% 
+%
 \def\acronym#1{\doacronym #1,,\finish}
 \def\doacronym#1,#2,#3\finish{%
   {\selectfonts\lsize #1}%
@@ -2052,11 +2776,12 @@
   \ifx\temp\empty \else
     \space ({\unsepspaces \ignorespaces \temp \unskip})%
   \fi
+  \null % reset \spacefactor=1000
 }
 
 % @abbr for "Comput. J." and the like.
 % No font change, but don't do end-of-sentence spacing.
-% 
+%
 \def\abbr#1{\doabbr #1,,\finish}
 \def\doabbr#1,#2,#3\finish{%
   {\plainfrenchspacing #1}%
@@ -2064,8 +2789,255 @@
   \ifx\temp\empty \else
     \space ({\unsepspaces \ignorespaces \temp \unskip})%
   \fi
+  \null % reset \spacefactor=1000
 }
 
+% @asis just yields its argument.  Used with @table, for example.
+%
+\def\asis#1{#1}
+
+% @math outputs its argument in math mode.
+%
+% One complication: _ usually means subscripts, but it could also mean
+% an actual _ character, as in @math{@var{some_variable} + 1}.  So make
+% _ active, and distinguish by seeing if the current family is \slfam,
+% which is what @var uses.
+{
+  \catcode`\_ = \active
+  \gdef\mathunderscore{%
+    \catcode`\_=\active
+    \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
+  }
+}
+% Another complication: we want \\ (and @\) to output a math (or tt) \.
+% FYI, plain.tex uses \\ as a temporary control sequence (for no
+% particular reason), but this is not advertised and we don't care.
+%
+% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\.
+\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi}
+%
+\def\math{%
+  \tex
+  \mathunderscore
+  \let\\ = \mathbackslash
+  \mathactive
+  % make the texinfo accent commands work in math mode
+  \let\"=\ddot
+  \let\'=\acute
+  \let\==\bar
+  \let\^=\hat
+  \let\`=\grave
+  \let\u=\breve
+  \let\v=\check
+  \let\~=\tilde
+  \let\dotaccent=\dot
+  $\finishmath
+}
+\def\finishmath#1{#1$\endgroup}  % Close the group opened by \tex.
+
+% Some active characters (such as <) are spaced differently in math.
+% We have to reset their definitions in case the @math was an argument
+% to a command which sets the catcodes (such as @item or @section).
+%
+{
+  \catcode`^ = \active
+  \catcode`< = \active
+  \catcode`> = \active
+  \catcode`+ = \active
+  \catcode`' = \active
+  \gdef\mathactive{%
+    \let^ = \ptexhat
+    \let< = \ptexless
+    \let> = \ptexgtr
+    \let+ = \ptexplus
+    \let' = \ptexquoteright
+  }
+}
+
+% @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}.
+% Ignore unless FMTNAME == tex; then it is like @iftex and @tex,
+% except specified as a normal braced arg, so no newlines to worry about.
+% 
+\def\outfmtnametex{tex}
+%
+\long\def\inlinefmt#1{\doinlinefmt #1,\finish}
+\long\def\doinlinefmt#1,#2,\finish{%
+  \def\inlinefmtname{#1}%
+  \ifx\inlinefmtname\outfmtnametex \ignorespaces #2\fi
+}
+% For raw, must switch into @tex before parsing the argument, to avoid
+% setting catcodes prematurely.  Doing it this way means that, for
+% example, @inlineraw{html, foo{bar} gets a parse error instead of being
+% ignored.  But this isn't important because if people want a literal
+% *right* brace they would have to use a command anyway, so they may as
+% well use a command to get a left brace too.  We could re-use the
+% delimiter character idea from \verb, but it seems like overkill.
+% 
+\long\def\inlineraw{\tex \doinlineraw}
+\long\def\doinlineraw#1{\doinlinerawtwo #1,\finish}
+\def\doinlinerawtwo#1,#2,\finish{%
+  \def\inlinerawname{#1}%
+  \ifx\inlinerawname\outfmtnametex \ignorespaces #2\fi
+  \endgroup % close group opened by \tex.
+}
+
+
+\message{glyphs,}
+% and logos.
+
+% @@ prints an @, as does @atchar{}.
+\def\@{\char64 }
+\let\atchar=\@
+
+% @{ @} @lbracechar{} @rbracechar{} all generate brace characters.
+% Unless we're in typewriter, use \ecfont because the CM text fonts do
+% not have braces, and we don't want to switch into math.
+\def\mylbrace{{\ifmonospace\else\ecfont\fi \char123}}
+\def\myrbrace{{\ifmonospace\else\ecfont\fi \char125}}
+\let\{=\mylbrace \let\lbracechar=\{
+\let\}=\myrbrace \let\rbracechar=\}
+\begingroup
+  % Definitions to produce \{ and \} commands for indices,
+  % and @{ and @} for the aux/toc files.
+  \catcode`\{ = \other \catcode`\} = \other
+  \catcode`\[ = 1 \catcode`\] = 2
+  \catcode`\! = 0 \catcode`\\ = \other
+  !gdef!lbracecmd[\{]%
+  !gdef!rbracecmd[\}]%
+  !gdef!lbraceatcmd[@{]%
+  !gdef!rbraceatcmd[@}]%
+!endgroup
+
+% @comma{} to avoid , parsing problems.
+\let\comma = ,
+
+% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
+% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H.
+\let\, = \ptexc
+\let\dotaccent = \ptexdot
+\def\ringaccent#1{{\accent23 #1}}
+\let\tieaccent = \ptext
+\let\ubaraccent = \ptexb
+\let\udotaccent = \d
+
+% Other special characters: @questiondown @exclamdown @ordf @ordm
+% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss.
+\def\questiondown{?`}
+\def\exclamdown{!`}
+\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}}
+\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}}
+
+% Dotless i and dotless j, used for accents.
+\def\imacro{i}
+\def\jmacro{j}
+\def\dotless#1{%
+  \def\temp{#1}%
+  \ifx\temp\imacro \ifmmode\imath \else\ptexi \fi
+  \else\ifx\temp\jmacro \ifmmode\jmath \else\j \fi
+  \else \errmessage{@dotless can be used only with i or j}%
+  \fi\fi
+}
+
+% The \TeX{} logo, as in plain, but resetting the spacing so that a
+% period following counts as ending a sentence.  (Idea found in latex.)
+%
+\edef\TeX{\TeX \spacefactor=1000 }
+
+% @LaTeX{} logo.  Not quite the same results as the definition in
+% latex.ltx, since we use a different font for the raised A; it's most
+% convenient for us to use an explicitly smaller font, rather than using
+% the \scriptstyle font (since we don't reset \scriptstyle and
+% \scriptscriptstyle).
+%
+\def\LaTeX{%
+  L\kern-.36em
+  {\setbox0=\hbox{T}%
+   \vbox to \ht0{\hbox{%
+     \ifx\textnominalsize\xwordpt
+       % for 10pt running text, \lllsize (8pt) is too small for the A in LaTeX.
+       % Revert to plain's \scriptsize, which is 7pt.
+       \count255=\the\fam $\fam\count255 \scriptstyle A$%
+     \else
+       % For 11pt, we can use our lllsize.
+       \selectfonts\lllsize A%
+     \fi
+     }%
+     \vss
+  }}%
+  \kern-.15em
+  \TeX
+}
+
+% Some math mode symbols.
+\def\bullet{$\ptexbullet$}
+\def\geq{\ifmmode \ge\else $\ge$\fi}
+\def\leq{\ifmmode \le\else $\le$\fi}
+\def\minus{\ifmmode -\else $-$\fi}
+
+% @dots{} outputs an ellipsis using the current font.
+% We do .5em per period so that it has the same spacing in the cm
+% typewriter fonts as three actual period characters; on the other hand,
+% in other typewriter fonts three periods are wider than 1.5em.  So do
+% whichever is larger.
+%
+\def\dots{%
+  \leavevmode
+  \setbox0=\hbox{...}% get width of three periods
+  \ifdim\wd0 > 1.5em
+    \dimen0 = \wd0
+  \else
+    \dimen0 = 1.5em
+  \fi
+  \hbox to \dimen0{%
+    \hskip 0pt plus.25fil
+    .\hskip 0pt plus1fil
+    .\hskip 0pt plus1fil
+    .\hskip 0pt plus.5fil
+  }%
+}
+
+% @enddots{} is an end-of-sentence ellipsis.
+%
+\def\enddots{%
+  \dots
+  \spacefactor=\endofsentencespacefactor
+}
+
+% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
+%
+% Since these characters are used in examples, they should be an even number of
+% \tt widths. Each \tt character is 1en, so two makes it 1em.
+%
+\def\point{$\star$}
+\def\arrow{\leavevmode\raise.05ex\hbox to 1em{\hfil$\rightarrow$\hfil}}
+\def\result{\leavevmode\raise.05ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
+\def\expansion{\leavevmode\hbox to 1em{\hfil$\mapsto$\hfil}}
+\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
+\def\equiv{\leavevmode\hbox to 1em{\hfil$\ptexequiv$\hfil}}
+
+% The @error{} command.
+% Adapted from the TeXbook's \boxit.
+%
+\newbox\errorbox
+%
+{\tentt \global\dimen0 = 3em}% Width of the box.
+\dimen2 = .55pt % Thickness of rules
+% The text. (`r' is open on the right, `e' somewhat less so on the left.)
+\setbox0 = \hbox{\kern-.75pt \reducedsf \putworderror\kern-1.5pt}
+%
+\setbox\errorbox=\hbox to \dimen0{\hfil
+   \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
+   \advance\hsize by -2\dimen2 % Rules.
+   \vbox{%
+      \hrule height\dimen2
+      \hbox{\vrule width\dimen2 \kern3pt          % Space to left of text.
+         \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
+         \kern3pt\vrule width\dimen2}% Space to right.
+      \hrule height\dimen2}
+    \hfil}
+%
+\def\error{\leavevmode\lower.7ex\copy\errorbox}
+
 % @pounds{} is a sterling sign, which Knuth put in the CM italic font.
 %
 \def\pounds{{\it\$}}
@@ -2075,49 +3047,113 @@
 % Theiling, which support regular, slanted, bold and bold slanted (and
 % "outlined" (blackboard board, sort of) versions, which we don't need).
 % It is available from http://www.ctan.org/tex-archive/fonts/eurosym.
-% 
+%
 % Although only regular is the truly official Euro symbol, we ignore
 % that.  The Euro is designed to be slightly taller than the regular
 % font height.
-% 
+%
 % feymr - regular
 % feymo - slanted
 % feybr - bold
 % feybo - bold slanted
-% 
+%
 % There is no good (free) typewriter version, to my knowledge.
 % A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide.
 % Hmm.
-% 
+%
 % Also doesn't work in math.  Do we need to do math with euro symbols?
 % Hope not.
-% 
-% 
+%
+%
 \def\euro{{\eurofont e}}
 \def\eurofont{%
   % We set the font at each command, rather than predefining it in
   % \textfonts and the other font-switching commands, so that
   % installations which never need the symbol don't have to have the
   % font installed.
-  % 
+  %
   % There is only one designed size (nominal 10pt), so we always scale
   % that to the current nominal size.
-  % 
+  %
   % By the way, simply using "at 1em" works for cmr10 and the like, but
   % does not work for cmbx10 and other extended/shrunken fonts.
-  % 
+  %
   \def\eurosize{\csname\curfontsize nominalsize\endcsname}%
   %
-  \ifx\curfontstyle\bfstylename 
+  \ifx\curfontstyle\bfstylename
     % bold:
     \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize
-  \else 
+  \else
     % regular:
     \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize
   \fi
   \thiseurofont
 }
 
+% Glyphs from the EC fonts.  We don't use \let for the aliases, because
+% sometimes we redefine the original macro, and the alias should reflect
+% the redefinition.
+%
+% Use LaTeX names for the Icelandic letters.
+\def\DH{{\ecfont \char"D0}} % Eth
+\def\dh{{\ecfont \char"F0}} % eth
+\def\TH{{\ecfont \char"DE}} % Thorn
+\def\th{{\ecfont \char"FE}} % thorn
+%
+\def\guillemetleft{{\ecfont \char"13}}
+\def\guillemotleft{\guillemetleft}
+\def\guillemetright{{\ecfont \char"14}}
+\def\guillemotright{\guillemetright}
+\def\guilsinglleft{{\ecfont \char"0E}}
+\def\guilsinglright{{\ecfont \char"0F}}
+\def\quotedblbase{{\ecfont \char"12}}
+\def\quotesinglbase{{\ecfont \char"0D}}
+%
+% This positioning is not perfect (see the ogonek LaTeX package), but
+% we have the precomposed glyphs for the most common cases.  We put the
+% tests to use those glyphs in the single \ogonek macro so we have fewer
+% dummy definitions to worry about for index entries, etc.
+%
+% ogonek is also used with other letters in Lithuanian (IOU), but using
+% the precomposed glyphs for those is not so easy since they aren't in
+% the same EC font.
+\def\ogonek#1{{%
+  \def\temp{#1}%
+  \ifx\temp\macrocharA\Aogonek
+  \else\ifx\temp\macrochara\aogonek
+  \else\ifx\temp\macrocharE\Eogonek
+  \else\ifx\temp\macrochare\eogonek
+  \else
+    \ecfont \setbox0=\hbox{#1}%
+    \ifdim\ht0=1ex\accent"0C #1%
+    \else\ooalign{\unhbox0\crcr\hidewidth\char"0C \hidewidth}%
+    \fi
+  \fi\fi\fi\fi
+  }%
+}
+\def\Aogonek{{\ecfont \char"81}}\def\macrocharA{A}
+\def\aogonek{{\ecfont \char"A1}}\def\macrochara{a}
+\def\Eogonek{{\ecfont \char"86}}\def\macrocharE{E}
+\def\eogonek{{\ecfont \char"A6}}\def\macrochare{e}
+%
+% Use the ec* fonts (cm-super in outline format) for non-CM glyphs.
+\def\ecfont{%
+  % We can't distinguish serif/sans and italic/slanted, but this
+  % is used for crude hacks anyway (like adding French and German
+  % quotes to documents typeset with CM, where we lose kerning), so
+  % hopefully nobody will notice/care.
+  \edef\ecsize{\csname\curfontsize ecsize\endcsname}%
+  \edef\nominalsize{\csname\curfontsize nominalsize\endcsname}%
+  \ifx\curfontstyle\bfstylename
+    % bold:
+    \font\thisecfont = ecb\ifusingit{i}{x}\ecsize \space at \nominalsize
+  \else
+    % regular:
+    \font\thisecfont = ec\ifusingit{ti}{rm}\ecsize \space at \nominalsize
+  \fi
+  \thisecfont
+}
+
 % @registeredsymbol - R in a circle.  The font for the R should really
 % be smaller yet, but lllsize is the best we can do for now.
 % Adapted from the plain.tex definition of \copyright.
@@ -2128,14 +3164,24 @@
     }$%
 }
 
+% @textdegree - the normal degrees sign.
+%
+\def\textdegree{$^\circ$}
+
 % Laurent Siebenmann reports \Orb undefined with:
 %  Textures 1.7.7 (preloaded format=plain 93.10.14)  (68K)  16 APR 2004 02:38
 % so we'll define it if necessary.
-% 
-\ifx\Orb\undefined
+%
+\ifx\Orb\thisisundefined
 \def\Orb{\mathhexbox20D}
 \fi
 
+% Quotes.
+\chardef\quotedblleft="5C
+\chardef\quotedblright=`\"
+\chardef\quoteleft=`\`
+\chardef\quoteright=`\'
+
 
 \message{page headings,}
 
@@ -2154,8 +3200,9 @@
 \newif\ifsetshortcontentsaftertitlepage
  \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue
 
-\parseargdef\shorttitlepage{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
-        \endgroup\page\hbox{}\page}
+\parseargdef\shorttitlepage{%
+  \begingroup \hbox{}\vskip 1.5in \chaprm \centerline{#1}%
+  \endgroup\page\hbox{}\page}
 
 \envdef\titlepage{%
   % Open one extra group, as we want to close it in the middle of \Etitlepage.
@@ -2215,17 +3262,14 @@
   \finishedtitlepagetrue
 }
 
-%%% Macros to be used within @titlepage:
+% Macros to be used within @titlepage:
 
 \let\subtitlerm=\tenrm
 \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}
 
-\def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines
-		\let\tt=\authortt}
-
 \parseargdef\title{%
   \checkenv\titlepage
-  \leftline{\titlefonts\rm #1}
+  \leftline{\titlefonts\rmisbold #1}
   % print a rule at the page bottom also.
   \finishedtitlepagefalse
   \vskip4pt \hrule height 4pt width \hsize \vskip4pt
@@ -2246,12 +3290,12 @@
   \else
     \checkenv\titlepage
     \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi
-    {\authorfont \leftline{#1}}%
+    {\secfonts\rmisbold \leftline{#1}}%
   \fi
 }
 
 
-%%% Set up page headings and footings.
+% Set up page headings and footings.
 
 \let\thispage=\folio
 
@@ -2299,12 +3343,39 @@
   %
   % Leave some space for the footline.  Hopefully ok to assume
   % @evenfooting will not be used by itself.
-  \global\advance\pageheight by -\baselineskip
-  \global\advance\vsize by -\baselineskip
+  \global\advance\pageheight by -12pt
+  \global\advance\vsize by -12pt
 }
 
 \parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}}
 
+% @evenheadingmarks top     \thischapter <- chapter at the top of a page
+% @evenheadingmarks bottom  \thischapter <- chapter at the bottom of a page
+%
+% The same set of arguments for:
+%
+% @oddheadingmarks
+% @evenfootingmarks
+% @oddfootingmarks
+% @everyheadingmarks
+% @everyfootingmarks
+
+\def\evenheadingmarks{\headingmarks{even}{heading}}
+\def\oddheadingmarks{\headingmarks{odd}{heading}}
+\def\evenfootingmarks{\headingmarks{even}{footing}}
+\def\oddfootingmarks{\headingmarks{odd}{footing}}
+\def\everyheadingmarks#1 {\headingmarks{even}{heading}{#1}
+                          \headingmarks{odd}{heading}{#1} }
+\def\everyfootingmarks#1 {\headingmarks{even}{footing}{#1}
+                          \headingmarks{odd}{footing}{#1} }
+% #1 = even/odd, #2 = heading/footing, #3 = top/bottom.
+\def\headingmarks#1#2#3 {%
+  \expandafter\let\expandafter\temp \csname get#3headingmarks\endcsname
+  \global\expandafter\let\csname get#1#2marks\endcsname \temp
+}
+
+\everyheadingmarks bottom
+\everyfootingmarks bottom
 
 % @headings double      turns headings on for double-sided printing.
 % @headings single      turns headings on for single-sided printing.
@@ -2318,10 +3389,14 @@
 
 \def\headings #1 {\csname HEADINGS#1\endcsname}
 
-\def\HEADINGSoff{%
-\global\evenheadline={\hfil} \global\evenfootline={\hfil}
-\global\oddheadline={\hfil} \global\oddfootline={\hfil}}
-\HEADINGSoff
+\def\headingsoff{% non-global headings elimination
+  \evenheadline={\hfil}\evenfootline={\hfil}%
+   \oddheadline={\hfil}\oddfootline={\hfil}%
+}
+
+\def\HEADINGSoff{{\globaldefs=1 \headingsoff}} % global setting
+\HEADINGSoff  % it's the default
+
 % When we turn headings on, set the page number to 1.
 % For double-sided printing, put current file name in lower left corner,
 % chapter name on inside top of right hand pages, document
@@ -2372,7 +3447,7 @@
 % This produces Day Month Year style of output.
 % Only define if not already defined, in case a txi-??.tex file has set
 % up a different format (e.g., txi-cs.tex does this).
-\ifx\today\undefined
+\ifx\today\thisisundefined
 \def\today{%
   \number\day\space
   \ifcase\month
@@ -2433,7 +3508,7 @@
     \begingroup
       \advance\leftskip by-\tableindent
       \advance\hsize by\tableindent
-      \advance\rightskip by0pt plus1fil
+      \advance\rightskip by0pt plus1fil\relax
       \leavevmode\unhbox0\par
     \endgroup
     %
@@ -2447,7 +3522,7 @@
     % cause the example and the item to crash together.  So we use this
     % bizarre value of 10001 as a signal to \aboveenvbreak to insert
     % \parskip glue after all.  Section titles are handled this way also.
-    % 
+    %
     \penalty 10001
     \endgroup
     \itemxneedsnegativevskipfalse
@@ -2541,9 +3616,18 @@
   \parindent=0pt
   \parskip=\smallskipamount
   \ifdim\parskip=0pt \parskip=2pt \fi
+  %
+  % Try typesetting the item mark that if the document erroneously says
+  % something like @itemize @samp (intending @table), there's an error
+  % right away at the @itemize.  It's not the best error message in the
+  % world, but it's better than leaving it to the @item.  This means if
+  % the user wants an empty mark, they have to say @w{} not just @w.
   \def\itemcontents{#1}%
+  \setbox0 = \hbox{\itemcontents}%
+  %
   % @itemize with no arg is equivalent to @itemize @bullet.
   \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi
+  %
   \let\item=\itemizeitem
 }
 
@@ -2564,6 +3648,7 @@
    \ifnum\lastpenalty<10000 \parskip=0in \fi
    \noindent
    \hbox to 0pt{\hss \itemcontents \kern\itemmargin}%
+   %
    \vadjust{\penalty 1200}}% not good to break after first line of item.
   \flushcr
 }
@@ -2785,12 +3870,19 @@
 %
 % @headitem starts a heading row, which we typeset in bold.
 % Assignments have to be global since we are inside the implicit group
-% of an alignment entry.  Note that \everycr resets \everytab.
-\def\headitem{\checkenv\multitable \crcr \global\everytab={\bf}\the\everytab}%
+% of an alignment entry.  \everycr resets \everytab so we don't have to
+% undo it ourselves.
+\def\headitemfont{\b}% for people to use in the template row; not changeable
+\def\headitem{%
+  \checkenv\multitable
+  \crcr
+  \global\everytab={\bf}% can't use \headitemfont since the parsing differs
+  \the\everytab % for the first item
+}%
 %
 % A \tab used to include \hskip1sp.  But then the space in a template
 % line is not enough.  That is bad.  So let's go back to just `&' until
-% we encounter the problem it was intended to solve again.
+% we again encounter the problem the 1sp was intended to solve.
 %					--karl, nathan@acm.org, 20apr99.
 \def\tab{\checkenv\multitable &\the\everytab}%
 
@@ -2902,18 +3994,18 @@
 \setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
 \global\advance\multitablelinespace by-\ht0
 \fi
-%% Test to see if parskip is larger than space between lines of
-%% table. If not, do nothing.
-%%        If so, set to same dimension as multitablelinespace.
+% Test to see if parskip is larger than space between lines of
+% table. If not, do nothing.
+%        If so, set to same dimension as multitablelinespace.
 \ifdim\multitableparskip>\multitablelinespace
 \global\multitableparskip=\multitablelinespace
-\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
-                                      %% than skip between lines in the table.
+\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller
+                                      % than skip between lines in the table.
 \fi%
 \ifdim\multitableparskip=0pt
 \global\multitableparskip=\multitablelinespace
-\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
-                                      %% than skip between lines in the table.
+\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller
+                                      % than skip between lines in the table.
 \fi}
 
 
@@ -2959,6 +4051,7 @@
 
 \def\doignore#1{\begingroup
   % Scan in ``verbatim'' mode:
+  \obeylines
   \catcode`\@ = \other
   \catcode`\{ = \other
   \catcode`\} = \other
@@ -2979,16 +4072,16 @@
   \gdef\dodoignore#1{%
     % #1 contains the command name as a string, e.g., `ifinfo'.
     %
-    % Define a command to find the next `@end #1', which must be on a line
-    % by itself.
-    \long\def\doignoretext##1^^M@end #1{\doignoretextyyy##1^^M@#1\_STOP_}%
+    % Define a command to find the next `@end #1'.
+    \long\def\doignoretext##1^^M@end #1{%
+      \doignoretextyyy##1^^M@#1\_STOP_}%
+    %
     % And this command to find another #1 command, at the beginning of a
     % line.  (Otherwise, we would consider a line `@c @ifset', for
     % example, to count as an @ifset for nesting.)
     \long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}%
     %
     % And now expand that command.
-    \obeylines %
     \doignoretext ^^M%
   }%
 }
@@ -3018,7 +4111,12 @@
 }
 
 % Finish off ignored text.
-\def\enddoignore{\endgroup\ignorespaces}
+{ \obeylines%
+  % Ignore anything after the last `@end #1'; this matters in verbatim
+  % environments, where otherwise the newline after an ignored conditional
+  % would result in a blank line in the output.
+  \gdef\enddoignore#1^^M{\endgroup\ignorespaces}%
+}
 
 
 % @set VAR sets the variable VAR to an empty value.
@@ -3183,11 +4281,11 @@
 \def\dosynindex#1#2#3{%
   % Only do \closeout if we haven't already done it, else we'll end up
   % closing the target index.
-  \expandafter \ifx\csname donesynindex#2\endcsname \undefined
+  \expandafter \ifx\csname donesynindex#2\endcsname \relax
     % The \closeout helps reduce unnecessary open files; the limit on the
     % Acorn RISC OS is a mere 16 files.
     \expandafter\closeout\csname#2indfile\endcsname
-    \expandafter\let\csname\donesynindex#2\endcsname = 1
+    \expandafter\let\csname donesynindex#2\endcsname = 1
   \fi
   % redefine \fooindfile:
   \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname
@@ -3221,11 +4319,41 @@
   \escapechar = `\\     % use backslash in output files.
   \def\@{@}% change to @@ when we switch to @ as escape char in index files.
   \def\ {\realbackslash\space }%
-  % Need these in case \tex is in effect and \{ is a \delimiter again.
-  % But can't use \lbracecmd and \rbracecmd because texindex assumes
-  % braces and backslashes are used only as delimiters.
-  \let\{ = \mylbrace
-  \let\} = \myrbrace
+  %
+  % Need these unexpandable (because we define \tt as a dummy)
+  % definitions when @{ or @} appear in index entry text.  Also, more
+  % complicated, when \tex is in effect and \{ is a \delimiter again.
+  % We can't use \lbracecmd and \rbracecmd because texindex assumes
+  % braces and backslashes are used only as delimiters.  Perhaps we
+  % should define @lbrace and @rbrace commands a la @comma.
+  \def\{{{\tt\char123}}%
+  \def\}{{\tt\char125}}%
+  %
+  % I don't entirely understand this, but when an index entry is
+  % generated from a macro call, the \endinput which \scanmacro inserts
+  % causes processing to be prematurely terminated.  This is,
+  % apparently, because \indexsorttmp is fully expanded, and \endinput
+  % is an expandable command.  The redefinition below makes \endinput
+  % disappear altogether for that purpose -- although logging shows that
+  % processing continues to some further point.  On the other hand, it
+  % seems \endinput does not hurt in the printed index arg, since that
+  % is still getting written without apparent harm.
+  %
+  % Sample source (mac-idx3.tex, reported by Graham Percival to
+  % help-texinfo, 22may06):
+  % @macro funindex {WORD}
+  % @findex xyz
+  % @end macro
+  % ...
+  % @funindex commtest
+  %
+  % The above is not enough to reproduce the bug, but it gives the flavor.
+  %
+  % Sample whatsit resulting:
+  % .@write3{\entry{xyz}{@folio }{@code {xyz@endinput }}}
+  %
+  % So:
+  \let\endinput = \empty
   %
   % Do the redefinitions.
   \commondummies
@@ -3244,6 +4372,7 @@
   %
   % Do the redefinitions.
   \commondummies
+  \otherbackslash
 }
 
 % Called from \indexdummies and \atdummies.
@@ -3251,7 +4380,7 @@
 \def\commondummies{%
   %
   % \definedummyword defines \#1 as \string\#1\space, thus effectively
-  % preventing its expansion.  This is used only for control% words,
+  % preventing its expansion.  This is used only for control words,
   % not control letters, because the \space would be incorrect for
   % control characters, but is needed to separate the control word
   % from whatever follows.
@@ -3270,23 +4399,28 @@
   \commondummiesnofonts
   %
   \definedummyletter\_%
+  \definedummyletter\-%
   %
   % Non-English letters.
   \definedummyword\AA
   \definedummyword\AE
+  \definedummyword\DH
   \definedummyword\L
-  \definedummyword\OE
   \definedummyword\O
+  \definedummyword\OE
+  \definedummyword\TH
   \definedummyword\aa
   \definedummyword\ae
-  \definedummyword\l
-  \definedummyword\oe
-  \definedummyword\o
-  \definedummyword\ss
+  \definedummyword\dh
   \definedummyword\exclamdown
-  \definedummyword\questiondown
+  \definedummyword\l
+  \definedummyword\o
+  \definedummyword\oe
   \definedummyword\ordf
   \definedummyword\ordm
+  \definedummyword\questiondown
+  \definedummyword\ss
+  \definedummyword\th
   %
   % Although these internal commands shouldn't show up, sometimes they do.
   \definedummyword\bf
@@ -3302,21 +4436,39 @@
   \definedummyword\TeX
   %
   % Assorted special characters.
+  \definedummyword\arrow
   \definedummyword\bullet
   \definedummyword\comma
   \definedummyword\copyright
   \definedummyword\registeredsymbol
   \definedummyword\dots
   \definedummyword\enddots
+  \definedummyword\entrybreak
   \definedummyword\equiv
   \definedummyword\error
   \definedummyword\euro
   \definedummyword\expansion
+  \definedummyword\geq
+  \definedummyword\guillemetleft
+  \definedummyword\guillemetright
+  \definedummyword\guilsinglleft
+  \definedummyword\guilsinglright
+  \definedummyword\lbracechar
+  \definedummyword\leq
   \definedummyword\minus
+  \definedummyword\ogonek
   \definedummyword\pounds
   \definedummyword\point
   \definedummyword\print
+  \definedummyword\quotedblbase
+  \definedummyword\quotedblleft
+  \definedummyword\quotedblright
+  \definedummyword\quoteleft
+  \definedummyword\quoteright
+  \definedummyword\quotesinglbase
+  \definedummyword\rbracechar
   \definedummyword\result
+  \definedummyword\textdegree
   %
   % We want to disable all macros so that they are not expanded by \write.
   \macrolist
@@ -3330,63 +4482,72 @@
 
 % \commondummiesnofonts: common to \commondummies and \indexnofonts.
 %
-% Better have this without active chars.
-{
-  \catcode`\~=\other
-  \gdef\commondummiesnofonts{%
-    % Control letters and accents.
-    \definedummyletter\!%
-    \definedummyaccent\"%
-    \definedummyaccent\'%
-    \definedummyletter\*%
-    \definedummyaccent\,%
-    \definedummyletter\.%
-    \definedummyletter\/%
-    \definedummyletter\:%
-    \definedummyaccent\=%
-    \definedummyletter\?%
-    \definedummyaccent\^%
-    \definedummyaccent\`%
-    \definedummyaccent\~%
-    \definedummyword\u
-    \definedummyword\v
-    \definedummyword\H
-    \definedummyword\dotaccent
-    \definedummyword\ringaccent
-    \definedummyword\tieaccent
-    \definedummyword\ubaraccent
-    \definedummyword\udotaccent
-    \definedummyword\dotless
-    %
-    % Texinfo font commands.
-    \definedummyword\b
-    \definedummyword\i
-    \definedummyword\r
-    \definedummyword\sc
-    \definedummyword\t
-    %
-    % Commands that take arguments.
-    \definedummyword\acronym
-    \definedummyword\cite
-    \definedummyword\code
-    \definedummyword\command
-    \definedummyword\dfn
-    \definedummyword\emph
-    \definedummyword\env
-    \definedummyword\file
-    \definedummyword\kbd
-    \definedummyword\key
-    \definedummyword\math
-    \definedummyword\option
-    \definedummyword\samp
-    \definedummyword\strong
-    \definedummyword\tie
-    \definedummyword\uref
-    \definedummyword\url
-    \definedummyword\var
-    \definedummyword\verb
-    \definedummyword\w
-  }
+\def\commondummiesnofonts{%
+  % Control letters and accents.
+  \definedummyletter\!%
+  \definedummyaccent\"%
+  \definedummyaccent\'%
+  \definedummyletter\*%
+  \definedummyaccent\,%
+  \definedummyletter\.%
+  \definedummyletter\/%
+  \definedummyletter\:%
+  \definedummyaccent\=%
+  \definedummyletter\?%
+  \definedummyaccent\^%
+  \definedummyaccent\`%
+  \definedummyaccent\~%
+  \definedummyword\u
+  \definedummyword\v
+  \definedummyword\H
+  \definedummyword\dotaccent
+  \definedummyword\ogonek
+  \definedummyword\ringaccent
+  \definedummyword\tieaccent
+  \definedummyword\ubaraccent
+  \definedummyword\udotaccent
+  \definedummyword\dotless
+  %
+  % Texinfo font commands.
+  \definedummyword\b
+  \definedummyword\i
+  \definedummyword\r
+  \definedummyword\sansserif
+  \definedummyword\sc
+  \definedummyword\slanted
+  \definedummyword\t
+  %
+  % Commands that take arguments.
+  \definedummyword\abbr
+  \definedummyword\acronym
+  \definedummyword\anchor
+  \definedummyword\cite
+  \definedummyword\code
+  \definedummyword\command
+  \definedummyword\dfn
+  \definedummyword\dmn
+  \definedummyword\email
+  \definedummyword\emph
+  \definedummyword\env
+  \definedummyword\file
+  \definedummyword\image
+  \definedummyword\indicateurl
+  \definedummyword\inforef
+  \definedummyword\kbd
+  \definedummyword\key
+  \definedummyword\math
+  \definedummyword\option
+  \definedummyword\pxref
+  \definedummyword\ref
+  \definedummyword\samp
+  \definedummyword\strong
+  \definedummyword\tie
+  \definedummyword\uref
+  \definedummyword\url
+  \definedummyword\var
+  \definedummyword\verb
+  \definedummyword\w
+  \definedummyword\xref
 }
 
 % \indexnofonts is used when outputting the strings to sort the index
@@ -3399,7 +4560,7 @@
   \def\definedummyaccent##1{\let##1\asis}%
   % We can just ignore other control letters.
   \def\definedummyletter##1{\let##1\empty}%
-  % Hopefully, all control words can become @asis.
+  % All control words become @asis by default; overrides below.
   \let\definedummyword\definedummyaccent
   %
   \commondummiesnofonts
@@ -3411,60 +4572,95 @@
   %
   \def\ { }%
   \def\@{@}%
-  % how to handle braces?
   \def\_{\normalunderscore}%
+  \def\-{}% @- shouldn't affect sorting
+  %
+  % Unfortunately, texindex is not prepared to handle braces in the
+  % content at all.  So for index sorting, we map @{ and @} to strings
+  % starting with |, since that ASCII character is between ASCII { and }.
+  \def\{{|a}%
+  \def\lbracechar{|a}%
+  %
+  \def\}{|b}%
+  \def\rbracechar{|b}%
   %
   % Non-English letters.
   \def\AA{AA}%
   \def\AE{AE}%
+  \def\DH{DZZ}%
   \def\L{L}%
   \def\OE{OE}%
   \def\O{O}%
+  \def\TH{ZZZ}%
   \def\aa{aa}%
   \def\ae{ae}%
+  \def\dh{dzz}%
+  \def\exclamdown{!}%
   \def\l{l}%
   \def\oe{oe}%
-  \def\o{o}%
-  \def\ss{ss}%
-  \def\exclamdown{!}%
-  \def\questiondown{?}%
   \def\ordf{a}%
   \def\ordm{o}%
+  \def\o{o}%
+  \def\questiondown{?}%
+  \def\ss{ss}%
+  \def\th{zzz}%
   %
   \def\LaTeX{LaTeX}%
   \def\TeX{TeX}%
   %
   % Assorted special characters.
   % (The following {} will end up in the sort string, but that's ok.)
+  \def\arrow{->}%
   \def\bullet{bullet}%
   \def\comma{,}%
   \def\copyright{copyright}%
-  \def\registeredsymbol{R}%
   \def\dots{...}%
   \def\enddots{...}%
   \def\equiv{==}%
   \def\error{error}%
   \def\euro{euro}%
   \def\expansion{==>}%
+  \def\geq{>=}%
+  \def\guillemetleft{<<}%
+  \def\guillemetright{>>}%
+  \def\guilsinglleft{<}%
+  \def\guilsinglright{>}%
+  \def\leq{<=}%
   \def\minus{-}%
-  \def\pounds{pounds}%
   \def\point{.}%
+  \def\pounds{pounds}%
   \def\print{-|}%
+  \def\quotedblbase{"}%
+  \def\quotedblleft{"}%
+  \def\quotedblright{"}%
+  \def\quoteleft{`}%
+  \def\quoteright{'}%
+  \def\quotesinglbase{,}%
+  \def\registeredsymbol{R}%
   \def\result{=>}%
+  \def\textdegree{o}%
+  %
+  \expandafter\ifx\csname SETtxiindexlquoteignore\endcsname\relax
+  \else \indexlquoteignore \fi
   %
   % We need to get rid of all macros, leaving only the arguments (if present).
   % Of course this is not nearly correct, but it is the best we can do for now.
   % makeinfo does not expand macros in the argument to @deffn, which ends up
   % writing an index entry, and texindex isn't prepared for an index sort entry
   % that starts with \.
-  % 
+  %
   % Since macro invocations are followed by braces, we can just redefine them
   % to take a single TeX argument.  The case of a macro invocation that
   % goes to end-of-line is not handled.
-  % 
+  %
   \macrolist
 }
 
+% Undocumented (for FSFS 2nd ed.): @set txiindexlquoteignore makes us
+% ignore left quotes in the sort term.
+{\catcode`\`=\active
+ \gdef\indexlquoteignore{\let`=\empty}}
+
 \let\indexbackslash=0  %overridden during \printindex.
 \let\SETmarginindex=\relax % put index entries in margin (undocumented)?
 
@@ -3490,11 +4686,7 @@
     %
     \edef\writeto{\csname#1indfile\endcsname}%
     %
-    \ifvmode
-      \dosubindsanitize
-    \else
-      \dosubindwrite
-    \fi
+    \safewhatsit\dosubindwrite
   }%
   \fi
 }
@@ -3531,13 +4723,13 @@
   \temp
 }
 
-% Take care of unwanted page breaks:
+% Take care of unwanted page breaks/skips around a whatsit:
 %
 % If a skip is the last thing on the list now, preserve it
 % by backing up by \lastskip, doing the \write, then inserting
 % the skip again.  Otherwise, the whatsit generated by the
-% \write will make \lastskip zero.  The result is that sequences
-% like this:
+% \write or \pdfdest will make \lastskip zero.  The result is that
+% sequences like this:
 % @end defun
 % @tindex whatever
 % @defun ...
@@ -3561,25 +4753,30 @@
 %
 \edef\zeroskipmacro{\expandafter\the\csname z@skip\endcsname}
 %
+\newskip\whatsitskip
+\newcount\whatsitpenalty
+%
 % ..., ready, GO:
 %
-\def\dosubindsanitize{%
+\def\safewhatsit#1{\ifhmode
+  #1%
+ \else
   % \lastskip and \lastpenalty cannot both be nonzero simultaneously.
-  \skip0 = \lastskip
+  \whatsitskip = \lastskip
   \edef\lastskipmacro{\the\lastskip}%
-  \count255 = \lastpenalty
+  \whatsitpenalty = \lastpenalty
   %
   % If \lastskip is nonzero, that means the last item was a
   % skip.  And since a skip is discardable, that means this
-  % -\skip0 glue we're inserting is preceded by a
+  % -\whatsitskip glue we're inserting is preceded by a
   % non-discardable item, therefore it is not a potential
   % breakpoint, therefore no \nobreak needed.
   \ifx\lastskipmacro\zeroskipmacro
   \else
-    \vskip-\skip0
+    \vskip-\whatsitskip
   \fi
   %
-  \dosubindwrite
+  #1%
   %
   \ifx\lastskipmacro\zeroskipmacro
     % If \lastskip was zero, perhaps the last item was a penalty, and
@@ -3587,20 +4784,19 @@
     % to re-insert the same penalty (values >10000 are used for various
     % signals); since we just inserted a non-discardable item, any
     % following glue (such as a \parskip) would be a breakpoint.  For example:
-    % 
     %   @deffn deffn-whatever
     %   @vindex index-whatever
     %   Description.
     % would allow a break between the index-whatever whatsit
     % and the "Description." paragraph.
-    \ifnum\count255>9999 \penalty\count255 \fi
+    \ifnum\whatsitpenalty>9999 \penalty\whatsitpenalty \fi
   \else
     % On the other hand, if we had a nonzero \lastskip,
     % this make-up glue would be preceded by a non-discardable item
     % (the whatsit from the \write), so we must insert a \nobreak.
-    \nobreak\vskip\skip0
+    \nobreak\vskip\whatsitskip
   \fi
-}
+\fi}
 
 % The index entry written in the file actually looks like
 %  \entry {sortstring}{page}{topic}
@@ -3642,6 +4838,7 @@
   %
   \smallfonts \rm
   \tolerance = 9500
+  \plainfrenchspacing
   \everypar = {}% don't want the \kern\-parindent from indentation suppression.
   %
   % See if the index file exists and is nonempty.
@@ -3715,10 +4912,9 @@
 %
 % A straightforward implementation would start like this:
 %	\def\entry#1#2{...
-% But this frozes the catcodes in the argument, and can cause problems to
+% But this freezes the catcodes in the argument, and can cause problems to
 % @code, which sets - active.  This problem was fixed by a kludge---
 % ``-'' was active throughout whole index, but this isn't really right.
-%
 % The right solution is to prevent \entry from swallowing the whole text.
 %                                 --kasal, 21nov03
 \def\entry{%
@@ -3755,10 +4951,17 @@
     % columns.
     \vskip 0pt plus1pt
     %
+    % When reading the text of entry, convert explicit line breaks
+    % from @* into spaces.  The user might give these in long section
+    % titles, for instance.
+    \def\*{\unskip\space\ignorespaces}%
+    \def\entrybreak{\hfil\break}%
+    %
     % Swallow the left brace of the text (first parameter):
     \afterassignment\doentry
     \let\temp =
 }
+\def\entrybreak{\unskip\space\ignorespaces}%
 \def\doentry{%
     \bgroup % Instead of the swallowed brace.
       \noindent
@@ -3771,11 +4974,8 @@
     % The following is kludged to not output a line of dots in the index if
     % there are no page numbers.  The next person who breaks this will be
     % cursed by a Unix daemon.
-    \def\tempa{{\rm }}%
-    \def\tempb{#1}%
-    \edef\tempc{\tempa}%
-    \edef\tempd{\tempb}%
-    \ifx\tempc\tempd
+    \setbox\boxA = \hbox{#1}%
+    \ifdim\wd\boxA = 0pt
       \ %
     \else
       %
@@ -3799,9 +4999,9 @@
   \endgroup
 }
 
-% Like \dotfill except takes at least 1 em.
+% Like plain.tex's \dotfill, except uses up at least 1 em.
 \def\indexdotfill{\cleaders
-  \hbox{$\mathsurround=0pt \mkern1.5mu ${\it .}$ \mkern1.5mu$}\hskip 1em plus 1fill}
+  \hbox{$\mathsurround=0pt \mkern1.5mu.\mkern1.5mu$}\hskip 1em plus 1fill}
 
 \def\primary #1{\line{#1\hfil}}
 
@@ -3911,6 +5111,34 @@
 %
 % All done with double columns.
 \def\enddoublecolumns{%
+  % The following penalty ensures that the page builder is exercised
+  % _before_ we change the output routine.  This is necessary in the
+  % following situation:
+  %
+  % The last section of the index consists only of a single entry.
+  % Before this section, \pagetotal is less than \pagegoal, so no
+  % break occurs before the last section starts.  However, the last
+  % section, consisting of \initial and the single \entry, does not
+  % fit on the page and has to be broken off.  Without the following
+  % penalty the page builder will not be exercised until \eject
+  % below, and by that time we'll already have changed the output
+  % routine to the \balancecolumns version, so the next-to-last
+  % double-column page will be processed with \balancecolumns, which
+  % is wrong:  The two columns will go to the main vertical list, with
+  % the broken-off section in the recent contributions.  As soon as
+  % the output routine finishes, TeX starts reconsidering the page
+  % break.  The two columns and the broken-off section both fit on the
+  % page, because the two columns now take up only half of the page
+  % goal.  When TeX sees \eject from below which follows the final
+  % section, it invokes the new output routine that we've set after
+  % \balancecolumns below; \onepageout will try to fit the two columns
+  % and the final section into the vbox of \pageheight (see
+  % \pagebody), causing an overfull box.
+  %
+  % Note that glue won't work here, because glue does not exercise the
+  % page builder, unlike penalties (see The TeXbook, pp. 280-281).
+  \penalty0
+  %
   \output = {%
     % Split the last of the double-column material.  Leave it on the
     % current page, no automatic page break.
@@ -3966,7 +5194,22 @@
 \message{sectioning,}
 % Chapters, sections, etc.
 
-% \unnumberedno is an oxymoron, of course.  But we count the unnumbered
+% Let's start with @part.
+\outer\parseargdef\part{\partzzz{#1}}
+\def\partzzz#1{%
+  \chapoddpage
+  \null
+  \vskip.3\vsize  % move it down on the page a bit
+  \begingroup
+    \noindent \titlefonts\rmisbold #1\par % the text
+    \let\lastnode=\empty      % no node to associate with
+    \writetocentry{part}{#1}{}% but put it in the toc
+    \headingsoff              % no headline or footline on the part page
+    \chapoddpage
+  \endgroup
+}
+
+% \unnumberedno is an oxymoron.  But we count the unnumbered
 % sections so that we can refer to them unambiguously in the pdf
 % outlines by their "section number".  We avoid collisions with chapter
 % numbers by starting them at 10000.  (If a document ever has 10000
@@ -4020,11 +5263,15 @@
   \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
   \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
 
-% Each @chapter defines this as the name of the chapter.
-% page headings and footings can use it.  @section does likewise.
-% However, they are not reliable, because we don't use marks.
+% Each @chapter defines these (using marks) as the number+name, number
+% and name of the chapter.  Page headings and footings can use
+% these.  @section does likewise.
 \def\thischapter{}
+\def\thischapternum{}
+\def\thischaptername{}
 \def\thissection{}
+\def\thissectionnum{}
+\def\thissectionname{}
 
 \newcount\absseclevel % used to calculate proper heading level
 \newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count
@@ -4041,8 +5288,8 @@
 \chardef\maxseclevel = 3
 %
 % A numbered section within an unnumbered changes to unnumbered too.
-% To achive this, remember the "biggest" unnum. sec. we are currently in:
-\chardef\unmlevel = \maxseclevel
+% To achieve this, remember the "biggest" unnum. sec. we are currently in:
+\chardef\unnlevel = \maxseclevel
 %
 % Trace whether the current chapter is an appendix or not:
 % \chapheadtype is "N" or "A", unnumbered chapters are ignored.
@@ -4067,8 +5314,8 @@
   % The heading type:
   \def\headtype{#1}%
   \if \headtype U%
-    \ifnum \absseclevel < \unmlevel
-      \chardef\unmlevel = \absseclevel
+    \ifnum \absseclevel < \unnlevel
+      \chardef\unnlevel = \absseclevel
     \fi
   \else
     % Check for appendix sections:
@@ -4080,10 +5327,10 @@
       \fi\fi
     \fi
     % Check for numbered within unnumbered:
-    \ifnum \absseclevel > \unmlevel
+    \ifnum \absseclevel > \unnlevel
       \def\headtype{U}%
     \else
-      \chardef\unmlevel = 3
+      \chardef\unnlevel = 3
     \fi
   \fi
   % Now print the heading:
@@ -4137,7 +5384,9 @@
   \gdef\chaplevelprefix{\the\chapno.}%
   \resetallfloatnos
   %
-  \message{\putwordChapter\space \the\chapno}%
+  % \putwordChapter can contain complex things in translations.
+  \toks0=\expandafter{\putwordChapter}%
+  \message{\the\toks0 \space \the\chapno}%
   %
   % Write the actual heading.
   \chapmacro{#1}{Ynumbered}{\the\chapno}%
@@ -4148,15 +5397,17 @@
   \global\let\subsubsection = \numberedsubsubsec
 }
 
-\outer\parseargdef\appendix{\apphead0{#1}} % normally apphead0 calls appendixzzz
+\outer\parseargdef\appendix{\apphead0{#1}} % normally calls appendixzzz
+%
 \def\appendixzzz#1{%
   \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
     \global\advance\appendixno by 1
   \gdef\chaplevelprefix{\appendixletter.}%
   \resetallfloatnos
   %
-  \def\appendixnum{\putwordAppendix\space \appendixletter}%
-  \message{\appendixnum}%
+  % \putwordAppendix can contain complex things in translations.
+  \toks0=\expandafter{\putwordAppendix}%
+  \message{\the\toks0 \space \appendixletter}%
   %
   \chapmacro{#1}{Yappendix}{\appendixletter}%
   %
@@ -4165,7 +5416,8 @@
   \global\let\subsubsection = \appendixsubsubsec
 }
 
-\outer\parseargdef\unnumbered{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
+% normally unnmhead0 calls unnumberedzzz:
+\outer\parseargdef\unnumbered{\unnmhead0{#1}}
 \def\unnumberedzzz#1{%
   \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
     \global\advance\unnumberedno by 1
@@ -4209,40 +5461,47 @@
 \let\top\unnumbered
 
 % Sections.
+% 
 \outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz
 \def\seczzz#1{%
   \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
   \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}%
 }
 
-\outer\parseargdef\appendixsection{\apphead1{#1}} % normally calls appendixsectionzzz
+% normally calls appendixsectionzzz:
+\outer\parseargdef\appendixsection{\apphead1{#1}}
 \def\appendixsectionzzz#1{%
   \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
   \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}%
 }
 \let\appendixsec\appendixsection
 
-\outer\parseargdef\unnumberedsec{\unnmhead1{#1}} % normally calls unnumberedseczzz
+% normally calls unnumberedseczzz:
+\outer\parseargdef\unnumberedsec{\unnmhead1{#1}}
 \def\unnumberedseczzz#1{%
   \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
   \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}%
 }
 
 % Subsections.
-\outer\parseargdef\numberedsubsec{\numhead2{#1}} % normally calls numberedsubseczzz
+% 
+% normally calls numberedsubseczzz:
+\outer\parseargdef\numberedsubsec{\numhead2{#1}}
 \def\numberedsubseczzz#1{%
   \global\subsubsecno=0  \global\advance\subsecno by 1
   \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}%
 }
 
-\outer\parseargdef\appendixsubsec{\apphead2{#1}} % normally calls appendixsubseczzz
+% normally calls appendixsubseczzz:
+\outer\parseargdef\appendixsubsec{\apphead2{#1}}
 \def\appendixsubseczzz#1{%
   \global\subsubsecno=0  \global\advance\subsecno by 1
   \sectionheading{#1}{subsec}{Yappendix}%
                  {\appendixletter.\the\secno.\the\subsecno}%
 }
 
-\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
+% normally calls unnumberedsubseczzz:
+\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}}
 \def\unnumberedsubseczzz#1{%
   \global\subsubsecno=0  \global\advance\subsecno by 1
   \sectionheading{#1}{subsec}{Ynothing}%
@@ -4250,21 +5509,25 @@
 }
 
 % Subsubsections.
-\outer\parseargdef\numberedsubsubsec{\numhead3{#1}} % normally numberedsubsubseczzz
+% 
+% normally numberedsubsubseczzz:
+\outer\parseargdef\numberedsubsubsec{\numhead3{#1}}
 \def\numberedsubsubseczzz#1{%
   \global\advance\subsubsecno by 1
   \sectionheading{#1}{subsubsec}{Ynumbered}%
                  {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}%
 }
 
-\outer\parseargdef\appendixsubsubsec{\apphead3{#1}} % normally appendixsubsubseczzz
+% normally appendixsubsubseczzz:
+\outer\parseargdef\appendixsubsubsec{\apphead3{#1}}
 \def\appendixsubsubseczzz#1{%
   \global\advance\subsubsecno by 1
   \sectionheading{#1}{subsubsec}{Yappendix}%
                  {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}%
 }
 
-\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
+% normally unnumberedsubsubseczzz:
+\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}}
 \def\unnumberedsubsubseczzz#1{%
   \global\advance\subsubsecno by 1
   \sectionheading{#1}{subsubsec}{Ynothing}%
@@ -4288,7 +5551,6 @@
 %       3) Likewise, headings look best if no \parindent is used, and
 %          if justification is not attempted.  Hence \raggedright.
 
-
 \def\majorheading{%
   {\advance\chapheadingskip by 10pt \chapbreak }%
   \parsearg\chapheadingzzz
@@ -4297,8 +5559,8 @@
 \def\chapheading{\chapbreak \parsearg\chapheadingzzz}
 \def\chapheadingzzz#1{%
   {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
-                    \parindent=0pt\raggedright
-                    \rm #1\hfill}}%
+                    \parindent=0pt\ptexraggedright
+                    \rmisbold #1\hfill}}%
   \bigskip \par\penalty 200\relax
   \suppressfirstparagraphindent
 }
@@ -4315,17 +5577,28 @@
 % (including whitespace, linebreaking, etc. around it),
 % given all the information in convenient, parsed form.
 
-%%% Args are the skip and penalty (usually negative)
+% Args are the skip and penalty (usually negative)
 \def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
 
-%%% Define plain chapter starts, and page on/off switching for it
 % Parameter controlling skip before chapter headings (if needed)
-
 \newskip\chapheadingskip
 
+% Define plain chapter starts, and page on/off switching for it.
 \def\chapbreak{\dobreak \chapheadingskip {-4000}}
 \def\chappager{\par\vfill\supereject}
-\def\chapoddpage{\chappager \ifodd\pageno \else \hbox to 0pt{} \chappager\fi}
+% Because \domark is called before \chapoddpage, the filler page will
+% get the headings for the next chapter, which is wrong.  But we don't
+% care -- we just disable all headings on the filler page.
+\def\chapoddpage{%
+  \chappager
+  \ifodd\pageno \else
+    \begingroup
+      \headingsoff
+      \null
+      \chappager
+    \endgroup
+  \fi
+}
 
 \def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
 
@@ -4359,41 +5632,78 @@
 \def\Yappendixkeyword{Yappendix}
 %
 \def\chapmacro#1#2#3{%
+  % Insert the first mark before the heading break (see notes for \domark).
+  \let\prevchapterdefs=\lastchapterdefs
+  \let\prevsectiondefs=\lastsectiondefs
+  \gdef\lastsectiondefs{\gdef\thissectionname{}\gdef\thissectionnum{}%
+                        \gdef\thissection{}}%
+  %
+  \def\temptype{#2}%
+  \ifx\temptype\Ynothingkeyword
+    \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}%
+                          \gdef\thischapter{\thischaptername}}%
+  \else\ifx\temptype\Yomitfromtockeyword
+    \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}%
+                          \gdef\thischapter{}}%
+  \else\ifx\temptype\Yappendixkeyword
+    \toks0={#1}%
+    \xdef\lastchapterdefs{%
+      \gdef\noexpand\thischaptername{\the\toks0}%
+      \gdef\noexpand\thischapternum{\appendixletter}%
+      % \noexpand\putwordAppendix avoids expanding indigestible
+      % commands in some of the translations.
+      \gdef\noexpand\thischapter{\noexpand\putwordAppendix{}
+                                 \noexpand\thischapternum:
+                                 \noexpand\thischaptername}%
+    }%
+  \else
+    \toks0={#1}%
+    \xdef\lastchapterdefs{%
+      \gdef\noexpand\thischaptername{\the\toks0}%
+      \gdef\noexpand\thischapternum{\the\chapno}%
+      % \noexpand\putwordChapter avoids expanding indigestible
+      % commands in some of the translations.
+      \gdef\noexpand\thischapter{\noexpand\putwordChapter{}
+                                 \noexpand\thischapternum:
+                                 \noexpand\thischaptername}%
+    }%
+  \fi\fi\fi
+  %
+  % Output the mark.  Pass it through \safewhatsit, to take care of
+  % the preceding space.
+  \safewhatsit\domark
+  %
+  % Insert the chapter heading break.
   \pchapsepmacro
+  %
+  % Now the second mark, after the heading break.  No break points
+  % between here and the heading.
+  \let\prevchapterdefs=\lastchapterdefs
+  \let\prevsectiondefs=\lastsectiondefs
+  \domark
+  %
   {%
-    \chapfonts \rm
+    \chapfonts \rmisbold
     %
-    % Have to define \thissection before calling \donoderef, because the
+    % Have to define \lastsection before calling \donoderef, because the
     % xref code eventually uses it.  On the other hand, it has to be called
     % after \pchapsepmacro, or the headline will change too soon.
-    \gdef\thissection{#1}%
-    \gdef\thischaptername{#1}%
+    \gdef\lastsection{#1}%
     %
     % Only insert the separating space if we have a chapter/appendix
     % number, and don't print the unnumbered ``number''.
-    \def\temptype{#2}%
     \ifx\temptype\Ynothingkeyword
       \setbox0 = \hbox{}%
       \def\toctype{unnchap}%
-      \gdef\thischapter{#1}%
     \else\ifx\temptype\Yomitfromtockeyword
       \setbox0 = \hbox{}% contents like unnumbered, but no toc entry
       \def\toctype{omit}%
-      \gdef\thischapter{}%
     \else\ifx\temptype\Yappendixkeyword
       \setbox0 = \hbox{\putwordAppendix{} #3\enspace}%
       \def\toctype{app}%
-      % We don't substitute the actual chapter name into \thischapter
-      % because we don't want its macros evaluated now.  And we don't
-      % use \thissection because that changes with each section.
-      %
-      \xdef\thischapter{\putwordAppendix{} \appendixletter:
-                        \noexpand\thischaptername}%
     \else
       \setbox0 = \hbox{#3\enspace}%
       \def\toctype{numchap}%
-      \xdef\thischapter{\putwordChapter{} \the\chapno:
-                        \noexpand\thischaptername}%
     \fi\fi\fi
     %
     % Write the toc entry for this chapter.  Must come before the
@@ -4409,7 +5719,8 @@
     \donoderef{#2}%
     %
     % Typeset the actual heading.
-    \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
+    \nobreak % Avoid page breaks at the interline glue.
+    \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright
           \hangindent=\wd0 \centerparametersmaybe
           \unhbox0 #1\par}%
   }%
@@ -4433,8 +5744,8 @@
 %
 \def\unnchfopen #1{%
 \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
-                       \parindent=0pt\raggedright
-                       \rm #1\hfill}}\bigskip \par\nobreak
+                       \parindent=0pt\ptexraggedright
+                       \rmisbold #1\hfill}}\bigskip \par\nobreak
 }
 \def\chfopen #1#2{\chapoddpage {\chapfonts
 \vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
@@ -4443,7 +5754,7 @@
 \def\centerchfopen #1{%
 \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
                        \parindent=0pt
-                       \hfill {\rm #1}\hfill}}\bigskip \par\nobreak
+                       \hfill {\rmisbold #1}\hfill}}\bigskip \par\nobreak
 }
 \def\CHAPFopen{%
   \global\let\chapmacro=\chfopen
@@ -4471,47 +5782,110 @@
 % the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the
 % section number.
 %
+\def\seckeyword{sec}
+%
 \def\sectionheading#1#2#3#4{%
   {%
+    \checkenv{}% should not be in an environment.
+    %
     % Switch to the right set of fonts.
-    \csname #2fonts\endcsname \rm
+    \csname #2fonts\endcsname \rmisbold
+    %
+    \def\sectionlevel{#2}%
+    \def\temptype{#3}%
+    %
+    % Insert first mark before the heading break (see notes for \domark).
+    \let\prevsectiondefs=\lastsectiondefs
+    \ifx\temptype\Ynothingkeyword
+      \ifx\sectionlevel\seckeyword
+        \gdef\lastsectiondefs{\gdef\thissectionname{#1}\gdef\thissectionnum{}%
+                              \gdef\thissection{\thissectionname}}%
+      \fi
+    \else\ifx\temptype\Yomitfromtockeyword
+      % Don't redefine \thissection.
+    \else\ifx\temptype\Yappendixkeyword
+      \ifx\sectionlevel\seckeyword
+        \toks0={#1}%
+        \xdef\lastsectiondefs{%
+          \gdef\noexpand\thissectionname{\the\toks0}%
+          \gdef\noexpand\thissectionnum{#4}%
+          % \noexpand\putwordSection avoids expanding indigestible
+          % commands in some of the translations.
+          \gdef\noexpand\thissection{\noexpand\putwordSection{}
+                                     \noexpand\thissectionnum:
+                                     \noexpand\thissectionname}%
+        }%
+      \fi
+    \else
+      \ifx\sectionlevel\seckeyword
+        \toks0={#1}%
+        \xdef\lastsectiondefs{%
+          \gdef\noexpand\thissectionname{\the\toks0}%
+          \gdef\noexpand\thissectionnum{#4}%
+          % \noexpand\putwordSection avoids expanding indigestible
+          % commands in some of the translations.
+          \gdef\noexpand\thissection{\noexpand\putwordSection{}
+                                     \noexpand\thissectionnum:
+                                     \noexpand\thissectionname}%
+        }%
+      \fi
+    \fi\fi\fi
+    %
+    % Go into vertical mode.  Usually we'll already be there, but we
+    % don't want the following whatsit to end up in a preceding paragraph
+    % if the document didn't happen to have a blank line.
+    \par
+    %
+    % Output the mark.  Pass it through \safewhatsit, to take care of
+    % the preceding space.
+    \safewhatsit\domark
     %
     % Insert space above the heading.
     \csname #2headingbreak\endcsname
     %
-    % Only insert the space after the number if we have a section number.
-    \def\sectionlevel{#2}%
-    \def\temptype{#3}%
+    % Now the second mark, after the heading break.  No break points
+    % between here and the heading.
+    \let\prevsectiondefs=\lastsectiondefs
+    \domark
     %
+    % Only insert the space after the number if we have a section number.
     \ifx\temptype\Ynothingkeyword
       \setbox0 = \hbox{}%
       \def\toctype{unn}%
-      \gdef\thissection{#1}%
+      \gdef\lastsection{#1}%
     \else\ifx\temptype\Yomitfromtockeyword
       % for @headings -- no section number, don't include in toc,
-      % and don't redefine \thissection.
+      % and don't redefine \lastsection.
       \setbox0 = \hbox{}%
       \def\toctype{omit}%
       \let\sectionlevel=\empty
     \else\ifx\temptype\Yappendixkeyword
       \setbox0 = \hbox{#4\enspace}%
       \def\toctype{app}%
-      \gdef\thissection{#1}%
+      \gdef\lastsection{#1}%
     \else
       \setbox0 = \hbox{#4\enspace}%
       \def\toctype{num}%
-      \gdef\thissection{#1}%
+      \gdef\lastsection{#1}%
     \fi\fi\fi
     %
-    % Write the toc entry (before \donoderef).  See comments in \chfplain.
+    % Write the toc entry (before \donoderef).  See comments in \chapmacro.
     \writetocentry{\toctype\sectionlevel}{#1}{#4}%
     %
     % Write the node reference (= pdf destination for pdftex).
-    % Again, see comments in \chfplain.
+    % Again, see comments in \chapmacro.
     \donoderef{#3}%
     %
+    % Interline glue will be inserted when the vbox is completed.
+    % That glue will be a valid breakpoint for the page, since it'll be
+    % preceded by a whatsit (usually from the \donoderef, or from the
+    % \writetocentry if there was no node).  We don't want to allow that
+    % break, since then the whatsits could end up on page n while the
+    % section is on page n+1, thus toc/etc. are wrong.  Debian bug 276000.
+    \nobreak
+    %
     % Output the actual section heading.
-    \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
+    \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright
           \hangindent=\wd0  % zero if no section number
           \unhbox0 #1}%
   }%
@@ -4525,15 +5899,15 @@
   %
   % We'll almost certainly start a paragraph next, so don't let that
   % glue accumulate.  (Not a breakpoint because it's preceded by a
-  % discardable item.)
+  % discardable item.)  However, when a paragraph is not started next
+  % (\startdefun, \cartouche, \center, etc.), this needs to be wiped out
+  % or the negative glue will cause weirdly wrong output, typically
+  % obscuring the section heading with something else.
   \vskip-\parskip
-  % 
-  % This is purely so the last item on the list is a known \penalty >
-  % 10000.  This is so \startdefun can avoid allowing breakpoints after
-  % section headings.  Otherwise, it would insert a valid breakpoint between:
-  % 
-  %   @section sec-whatever
-  %   @deffn def-whatever
+  %
+  % This is so the last item on the main vertical list is a known
+  % \penalty > 10000, so \startdefun, etc., can recognize the situation
+  % and do the needful.
   \penalty 10001
 }
 
@@ -4572,7 +5946,7 @@
        \edef\temp{%
          \write\tocfile{@#1entry{#2}{#3}{\lastnode}{\noexpand\folio}}}%
        \temp
-      }
+      }%
     \fi
   \fi
   %
@@ -4589,7 +5963,7 @@
 % These characters do not print properly in the Computer Modern roman
 % fonts, so we must take special care.  This is more or less redundant
 % with the Texinfo input format setup at the end of this file.
-% 
+%
 \def\activecatcodes{%
   \catcode`\"=\active
   \catcode`\$=\active
@@ -4607,7 +5981,7 @@
 \def\readtocfile{%
   \setupdatafile
   \activecatcodes
-  \input \jobname.toc
+  \input \tocreadfilename
 }
 
 \newskip\contentsrightmargin \contentsrightmargin=1in
@@ -4626,7 +6000,6 @@
   %
   % Don't need to put `Contents' or `Short Contents' in the headline.
   % It is abundantly clear what they are.
-  \def\thischapter{}%
   \chapmacro{#1}{Yomitfromtoc}{}%
   %
   \savepageno = \pageno
@@ -4638,11 +6011,16 @@
     \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi
 }
 
+% redefined for the two-volume lispref.  We always output on
+% \jobname.toc even if this is redefined.
+%
+\def\tocreadfilename{\jobname.toc}
 
 % Normal (long) toc.
+%
 \def\contents{%
   \startcontents{\putwordTOC}%
-    \openin 1 \jobname.toc
+    \openin 1 \tocreadfilename\space
     \ifeof 1 \else
       \readtocfile
     \fi
@@ -4661,6 +6039,7 @@
 \def\summarycontents{%
   \startcontents{\putwordShortTOC}%
     %
+    \let\partentry = \shortpartentry
     \let\numchapentry = \shortchapentry
     \let\appentry = \shortchapentry
     \let\unnchapentry = \shortunnchapentry
@@ -4680,7 +6059,7 @@
     \let\numsubsubsecentry = \numsecentry
     \let\appsubsubsecentry = \numsecentry
     \let\unnsubsubsecentry = \numsecentry
-    \openin 1 \jobname.toc
+    \openin 1 \tocreadfilename\space
     \ifeof 1 \else
       \readtocfile
     \fi
@@ -4716,6 +6095,19 @@
 % The last argument is the page number.
 % The arguments in between are the chapter number, section number, ...
 
+% Parts, in the main contents.  Replace the part number, which doesn't
+% exist, with an empty box.  Let's hope all the numbers have the same width.
+% Also ignore the page number, which is conventionally not printed.
+\def\numeralbox{\setbox0=\hbox{8}\hbox to \wd0{\hfil}}
+\def\partentry#1#2#3#4{\dochapentry{\numeralbox\labelspace#1}{}}
+%
+% Parts, in the short toc.
+\def\shortpartentry#1#2#3#4{%
+  \penalty-300
+  \vskip.5\baselineskip plus.15\baselineskip minus.1\baselineskip
+  \shortchapentry{{\bf #1}}{\numeralbox}{}{}%
+}
+
 % Chapters, in the main contents.
 \def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}}
 %
@@ -4805,45 +6197,12 @@
 \message{environments,}
 % @foo ... @end foo.
 
-% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
-%
-% Since these characters are used in examples, it should be an even number of
-% \tt widths. Each \tt character is 1en, so two makes it 1em.
-%
-\def\point{$\star$}
-\def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
-\def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}}
-\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
-\def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}}
-
-% The @error{} command.
-% Adapted from the TeXbook's \boxit.
-%
-\newbox\errorbox
-%
-{\tentt \global\dimen0 = 3em}% Width of the box.
-\dimen2 = .55pt % Thickness of rules
-% The text. (`r' is open on the right, `e' somewhat less so on the left.)
-\setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt}
-%
-\setbox\errorbox=\hbox to \dimen0{\hfil
-   \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
-   \advance\hsize by -2\dimen2 % Rules.
-   \vbox{%
-      \hrule height\dimen2
-      \hbox{\vrule width\dimen2 \kern3pt          % Space to left of text.
-         \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
-         \kern3pt\vrule width\dimen2}% Space to right.
-      \hrule height\dimen2}
-    \hfil}
-%
-\def\error{\leavevmode\lower.7ex\copy\errorbox}
-
-% @tex ... @end tex    escapes into raw Tex temporarily.
+% @tex ... @end tex    escapes into raw TeX temporarily.
 % One exception: @ is still an escape character, so that @end tex works.
-% But \@ or @@ will get a plain tex @ character.
+% But \@ or @@ will get a plain @ character.
 
 \envdef\tex{%
+  \setupmarkupstyle{tex}%
   \catcode `\\=0 \catcode `\{=1 \catcode `\}=2
   \catcode `\$=3 \catcode `\&=4 \catcode `\#=6
   \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie
@@ -4853,8 +6212,14 @@
   \catcode `\|=\other
   \catcode `\<=\other
   \catcode `\>=\other
+  \catcode`\`=\other
+  \catcode`\'=\other
   \escapechar=`\\
   %
+  % ' is active in math mode (mathcode"8000).  So reset it, and all our
+  % other math active characters (just in case), to plain's definitions.
+  \mathactive
+  %
   \let\b=\ptexb
   \let\bullet=\ptexbullet
   \let\c=\ptexc
@@ -4872,6 +6237,7 @@
   \let\/=\ptexslash
   \let\*=\ptexstar
   \let\t=\ptext
+  \expandafter \let\csname top\endcsname=\ptextop  % outer
   \let\frenchspacing=\plainfrenchspacing
   %
   \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
@@ -4957,6 +6323,12 @@
   \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
   % Flag to tell @lisp, etc., not to narrow margin.
   \let\nonarrowing = t%
+  %
+  % If this cartouche directly follows a sectioning command, we need the
+  % \parskip glue (backspaced over by default) or the cartouche can
+  % collide with the section heading.
+  \ifnum\lastpenalty>10000 \vskip\parskip \penalty\lastpenalty \fi
+  %
   \vbox\bgroup
       \baselineskip=0pt\parskip=0pt\lineskip=0pt
       \carttop
@@ -4970,7 +6342,7 @@
 	      \lineskip=\normlskip
 	      \parskip=\normpskip
 	      \vskip -\parskip
-	      \comment % For explanation, see the end of \def\group.
+	      \comment % For explanation, see the end of def\group.
 }
 \def\Ecartouche{%
               \ifhmode\par\fi
@@ -4987,6 +6359,7 @@
 
 % This macro is called at the beginning of all the @example variants,
 % inside a group.
+\newdimen\nonfillparindent
 \def\nonfillstart{%
   \aboveenvbreak
   \hfuzz = 12pt % Don't be fussy
@@ -4994,7 +6367,12 @@
   \let\par = \lisppar % don't ignore blank lines
   \obeylines % each line of input is a line of output
   \parskip = 0pt
+  % Turn off paragraph indentation but redefine \indent to emulate
+  % the normal \indent.
+  \nonfillparindent=\parindent
   \parindent = 0pt
+  \let\indent\nonfillindent
+  %
   \emergencystretch = 0pt % don't try to avoid overfull boxes
   \ifx\nonarrowing\relax
     \advance \leftskip by \lispnarrowing
@@ -5005,6 +6383,24 @@
   \let\exdent=\nofillexdent
 }
 
+\begingroup
+\obeyspaces
+% We want to swallow spaces (but not other tokens) after the fake
+% @indent in our nonfill-environments, where spaces are normally
+% active and set to @tie, resulting in them not being ignored after
+% @indent.
+\gdef\nonfillindent{\futurelet\temp\nonfillindentcheck}%
+\gdef\nonfillindentcheck{%
+\ifx\temp %
+\expandafter\nonfillindentgobble%
+\else%
+\leavevmode\nonfillindentbox%
+\fi%
+}%
+\endgroup
+\def\nonfillindentgobble#1{\nonfillindent}
+\def\nonfillindentbox{\hbox to \nonfillparindent{\hss}}
+
 % If you want all examples etc. small: @set dispenvsize small.
 % If you want even small examples the full size: @set dispenvsize nosmall.
 % This affects the following displayed environments:
@@ -5015,53 +6411,59 @@
 \let\SETdispenvsize\relax
 \def\setnormaldispenv{%
   \ifx\SETdispenvsize\smallword
+    % end paragraph for sake of leading, in case document has no blank
+    % line.  This is redundant with what happens in \aboveenvbreak, but
+    % we need to do it before changing the fonts, and it's inconvenient
+    % to change the fonts afterward.
+    \ifnum \lastpenalty=10000 \else \endgraf \fi
     \smallexamplefonts \rm
   \fi
 }
 \def\setsmalldispenv{%
   \ifx\SETdispenvsize\nosmallword
   \else
+    \ifnum \lastpenalty=10000 \else \endgraf \fi
     \smallexamplefonts \rm
   \fi
 }
 
 % We often define two environments, @foo and @smallfoo.
-% Let's do it by one command:
-\def\makedispenv #1#2{
-  \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2}
-  \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2}
+% Let's do it in one command.  #1 is the env name, #2 the definition.
+\def\makedispenvdef#1#2{%
+  \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2}%
+  \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2}%
   \expandafter\let\csname E#1\endcsname \afterenvbreak
   \expandafter\let\csname Esmall#1\endcsname \afterenvbreak
 }
 
-% Define two synonyms:
-\def\maketwodispenvs #1#2#3{
-  \makedispenv{#1}{#3}
-  \makedispenv{#2}{#3}
+% Define two environment synonyms (#1 and #2) for an environment.
+\def\maketwodispenvdef#1#2#3{%
+  \makedispenvdef{#1}{#3}%
+  \makedispenvdef{#2}{#3}%
 }
-
-% @lisp: indented, narrowed, typewriter font; @example: same as @lisp.
+%
+% @lisp: indented, narrowed, typewriter font;
+% @example: same as @lisp.
 %
 % @smallexample and @smalllisp: use smaller fonts.
 % Originally contributed by Pavel@xerox.
 %
-\maketwodispenvs {lisp}{example}{%
+\maketwodispenvdef{lisp}{example}{%
   \nonfillstart
-  \tt
+  \tt\setupmarkupstyle{example}%
   \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
-  \gobble       % eat return
+  \gobble % eat return
 }
-
 % @display/@smalldisplay: same as @lisp except keep current font.
 %
-\makedispenv {display}{%
+\makedispenvdef{display}{%
   \nonfillstart
   \gobble
 }
 
 % @format/@smallformat: same as @display except don't narrow margins.
 %
-\makedispenv{format}{%
+\makedispenvdef{format}{%
   \let\nonarrowing = t%
   \nonfillstart
   \gobble
@@ -5080,18 +6482,44 @@
 \envdef\flushright{%
   \let\nonarrowing = t%
   \nonfillstart
-  \advance\leftskip by 0pt plus 1fill
+  \advance\leftskip by 0pt plus 1fill\relax
   \gobble
 }
 \let\Eflushright = \afterenvbreak
 
 
+% @raggedright does more-or-less normal line breaking but no right
+% justification.  From plain.tex.
+\envdef\raggedright{%
+  \rightskip0pt plus2em \spaceskip.3333em \xspaceskip.5em\relax
+}
+\let\Eraggedright\par
+
+\envdef\raggedleft{%
+  \parindent=0pt \leftskip0pt plus2em
+  \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt
+  \hbadness=10000 % Last line will usually be underfull, so turn off
+                  % badness reporting.
+}
+\let\Eraggedleft\par
+
+\envdef\raggedcenter{%
+  \parindent=0pt \rightskip0pt plus1em \leftskip0pt plus1em
+  \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt
+  \hbadness=10000 % Last line will usually be underfull, so turn off
+                  % badness reporting.
+}
+\let\Eraggedcenter\par
+
+
 % @quotation does normal linebreaking (hence we can't use \nonfillstart)
 % and narrows the margins.  We keep \parskip nonzero in general, since
 % we're doing normal filling.  So, when using \aboveenvbreak and
 % \afterenvbreak, temporarily make \parskip 0.
 %
-\envdef\quotation{%
+\makedispenvdef{quotation}{\quotationstart}
+%
+\def\quotationstart{%
   {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
   \parindent=0pt
   %
@@ -5111,12 +6539,13 @@
 %
 \def\Equotation{%
   \par
-  \ifx\quotationauthor\undefined\else
+  \ifx\quotationauthor\thisisundefined\else
     % indent a bit.
     \leftline{\kern 2\leftskip \sl ---\quotationauthor}%
   \fi
   {\parskip=0pt \afterenvbreak}%
 }
+\def\Esmallquotation{\Equotation}
 
 % If we're given an argument, typeset it in bold with a colon after.
 \def\quotationlabel#1{%
@@ -5141,18 +6570,16 @@
   \do\ \do\\\do\{\do\}\do\$\do\&%
   \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~%
   \do\<\do\>\do\|\do\@\do+\do\"%
+  % Don't do the quotes -- if we do, @set txicodequoteundirected and
+  % @set txicodequotebacktick will not have effect on @verb and
+  % @verbatim, and ?` and !` ligatures won't get disabled.
+  %\do\`\do\'%
 }
 %
 % [Knuth] p. 380
 \def\uncatcodespecials{%
   \def\do##1{\catcode`##1=\other}\dospecials}
 %
-% [Knuth] pp. 380,381,391
-% Disable Spanish ligatures ?` and !` of \tt font
-\begingroup
-  \catcode`\`=\active\gdef`{\relax\lq}
-\endgroup
-%
 % Setup for the @verb command.
 %
 % Eight spaces for a tab
@@ -5164,7 +6591,7 @@
 \def\setupverb{%
   \tt  % easiest (and conventionally used) font for verbatim
   \def\par{\leavevmode\endgraf}%
-  \catcode`\`=\active
+  \setupmarkupstyle{verb}%
   \tabeightspaces
   % Respect line breaks,
   % print special symbols as themselves, and
@@ -5175,35 +6602,46 @@
 
 % Setup for the @verbatim environment
 %
-% Real tab expansion
+% Real tab expansion.
 \newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount
 %
-\def\starttabbox{\setbox0=\hbox\bgroup}
+% We typeset each line of the verbatim in an \hbox, so we can handle
+% tabs.  The \global is in case the verbatim line starts with an accent,
+% or some other command that starts with a begin-group.  Otherwise, the
+% entire \verbbox would disappear at the corresponding end-group, before
+% it is typeset.  Meanwhile, we can't have nested verbatim commands
+% (can we?), so the \global won't be overwriting itself.
+\newbox\verbbox
+\def\starttabbox{\global\setbox\verbbox=\hbox\bgroup}
+%
 \begingroup
   \catcode`\^^I=\active
   \gdef\tabexpand{%
     \catcode`\^^I=\active
     \def^^I{\leavevmode\egroup
-      \dimen0=\wd0 % the width so far, or since the previous tab
-      \divide\dimen0 by\tabw
-      \multiply\dimen0 by\tabw % compute previous multiple of \tabw
-      \advance\dimen0 by\tabw  % advance to next multiple of \tabw
-      \wd0=\dimen0 \box0 \starttabbox
+      \dimen\verbbox=\wd\verbbox % the width so far, or since the previous tab
+      \divide\dimen\verbbox by\tabw
+      \multiply\dimen\verbbox by\tabw % compute previous multiple of \tabw
+      \advance\dimen\verbbox by\tabw  % advance to next multiple of \tabw
+      \wd\verbbox=\dimen\verbbox \box\verbbox \starttabbox
     }%
   }
 \endgroup
+
+% start the verbatim environment.
 \def\setupverbatim{%
   \let\nonarrowing = t%
   \nonfillstart
-  % Easiest (and conventionally used) font for verbatim
-  \tt
-  \def\par{\leavevmode\egroup\box0\endgraf}%
-  \catcode`\`=\active
+  \tt % easiest (and conventionally used) font for verbatim
+  % The \leavevmode here is for blank lines.  Otherwise, we would
+  % never \starttabox and the \egroup would end verbatim mode.
+  \def\par{\leavevmode\egroup\box\verbbox\endgraf}%
   \tabexpand
+  \setupmarkupstyle{verbatim}%
   % Respect line breaks,
   % print special symbols as themselves, and
-  % make each space count
-  % must do in this order:
+  % make each space count.
+  % Must do in this order:
   \obeylines \uncatcodespecials \sepspaces
   \everypar{\starttabbox}%
 }
@@ -5259,6 +6697,8 @@
   {%
     \makevalueexpandable
     \setupverbatim
+    \indexnofonts       % Allow `@@' and other weird things in file names.
+    \wlog{texinfo.tex: doing @verbatiminclude of #1^^J}%
     \input #1
     \afterenvbreak
   }%
@@ -5284,27 +6724,35 @@
   \endgroup
 }
 
+
 \message{defuns,}
 % @defun etc.
 
 \newskip\defbodyindent \defbodyindent=.4in
 \newskip\defargsindent \defargsindent=50pt
 \newskip\deflastargmargin \deflastargmargin=18pt
+\newcount\defunpenalty
 
 % Start the processing of @deffn:
 \def\startdefun{%
   \ifnum\lastpenalty<10000
     \medbreak
+    \defunpenalty=10003 % Will keep this @deffn together with the
+                        % following @def command, see below.
   \else
     % If there are two @def commands in a row, we'll have a \nobreak,
     % which is there to keep the function description together with its
     % header.  But if there's nothing but headers, we need to allow a
     % break somewhere.  Check specifically for penalty 10002, inserted
-    % by \defargscommonending, instead of 10000, since the sectioning
+    % by \printdefunline, instead of 10000, since the sectioning
     % commands also insert a nobreak penalty, and we don't want to allow
     % a break between a section heading and a defun.
-    % 
-    \ifnum\lastpenalty=10002 \penalty2000 \fi
+    %
+    % As a further refinement, we avoid "club" headers by signalling
+    % with penalty of 10003 after the very first @deffn in the
+    % sequence (see above), and penalty of 10002 after any following
+    % @def command.
+    \ifnum\lastpenalty=10002 \penalty2000 \else \defunpenalty=10002 \fi
     %
     % Similarly, after a section heading, do not allow a break.
     % But do insert the glue.
@@ -5322,7 +6770,7 @@
   %
   % As above, allow line break if we have multiple x headers in a row.
   % It's not a great place, though.
-  \ifnum\lastpenalty=10002 \penalty3000 \fi
+  \ifnum\lastpenalty=10002 \penalty3000 \else \defunpenalty=10002 \fi
   %
   % And now, it's time to reuse the body of the original defun:
   \expandafter\gobbledefun#1%
@@ -5337,10 +6785,10 @@
     #1#2 \endheader
     % common ending:
     \interlinepenalty = 10000
-    \advance\rightskip by 0pt plus 1fil
+    \advance\rightskip by 0pt plus 1fil\relax
     \endgraf
     \nobreak\vskip -\parskip
-    \penalty 10002  % signal to \startdefun and \dodefunx
+    \penalty\defunpenalty  % signal to \startdefun and \dodefunx
     % Some of the @defun-type tags do not enable magic parentheses,
     % rendering the following check redundant.  But we don't optimize.
     \checkparencounts
@@ -5350,7 +6798,7 @@
 \def\Edefun{\endgraf\medbreak}
 
 % \makedefun{deffn} creates \deffn, \deffnx and \Edeffn;
-% the only thing remainnig is to define \deffnheader.
+% the only thing remaining is to define \deffnheader.
 %
 \def\makedefun#1{%
   \expandafter\let\csname E#1\endcsname = \Edefun
@@ -5367,13 +6815,36 @@
 \def\domakedefun#1#2#3{%
   \envdef#1{%
     \startdefun
+    \doingtypefnfalse    % distinguish typed functions from all else
     \parseargusing\activeparens{\printdefunline#3}%
   }%
   \def#2{\dodefunx#1}%
   \def#3%
 }
 
-%%% Untyped functions:
+\newif\ifdoingtypefn       % doing typed function?
+\newif\ifrettypeownline    % typeset return type on its own line?
+
+% @deftypefnnewline on|off says whether the return type of typed functions
+% are printed on their own line.  This affects @deftypefn, @deftypefun,
+% @deftypeop, and @deftypemethod.
+% 
+\parseargdef\deftypefnnewline{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETtxideftypefnnl\endcsname
+      = \empty
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETtxideftypefnnl\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @txideftypefnnl value `\temp',
+                must be on|off}%
+  \fi\fi
+}
+
+% Untyped functions:
 
 % @deffn category name args
 \makedefun{deffn}{\deffngeneral{}}
@@ -5392,7 +6863,7 @@
   \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}%
 }
 
-%%% Typed functions:
+% Typed functions:
 
 % @deftypefn category type name args
 \makedefun{deftypefn}{\deftypefngeneral{}}
@@ -5407,10 +6878,11 @@
 %
 \def\deftypefngeneral#1#2 #3 #4 #5\endheader{%
   \dosubind{fn}{\code{#4}}{#1}%
+  \doingtypefntrue
   \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
 }
 
-%%% Typed variables:
+% Typed variables:
 
 % @deftypevr category type var args
 \makedefun{deftypevr}{\deftypecvgeneral{}}
@@ -5428,7 +6900,7 @@
   \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
 }
 
-%%% Untyped variables:
+% Untyped variables:
 
 % @defvr category var args
 \makedefun{defvr}#1 {\deftypevrheader{#1} {} }
@@ -5439,7 +6911,8 @@
 % \defcvof {category of}class var args
 \def\defcvof#1#2 {\deftypecvof{#1}#2 {} }
 
-%%% Type:
+% Types:
+
 % @deftp category name args
 \makedefun{deftp}#1 #2 #3\endheader{%
   \doind{tp}{\code{#2}}%
@@ -5467,25 +6940,49 @@
 % We are followed by (but not passed) the arguments, if any.
 %
 \def\defname#1#2#3{%
+  \par
   % Get the values of \leftskip and \rightskip as they were outside the @def...
   \advance\leftskip by -\defbodyindent
   %
-  % How we'll format the type name.  Putting it in brackets helps
+  % Determine if we are typesetting the return type of a typed function
+  % on a line by itself.
+  \rettypeownlinefalse
+  \ifdoingtypefn  % doing a typed function specifically?
+    % then check user option for putting return type on its own line:
+    \expandafter\ifx\csname SETtxideftypefnnl\endcsname\relax \else
+      \rettypeownlinetrue
+    \fi
+  \fi
+  %
+  % How we'll format the category name.  Putting it in brackets helps
   % distinguish it from the body text that may end up on the next line
   % just below it.
   \def\temp{#1}%
   \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi}
   %
-  % Figure out line sizes for the paragraph shape.
+  % Figure out line sizes for the paragraph shape.  We'll always have at
+  % least two.
+  \tempnum = 2
+  %
   % The first line needs space for \box0; but if \rightskip is nonzero,
   % we need only space for the part of \box0 which exceeds it:
   \dimen0=\hsize  \advance\dimen0 by -\wd0  \advance\dimen0 by \rightskip
+  %
+  % If doing a return type on its own line, we'll have another line.
+  \ifrettypeownline
+    \advance\tempnum by 1
+    \def\maybeshapeline{0in \hsize}%
+  \else
+    \def\maybeshapeline{}%
+  \fi
+  %
   % The continuations:
   \dimen2=\hsize  \advance\dimen2 by -\defargsindent
-  % (plain.tex says that \dimen1 should be used only as global.)
-  \parshape 2 0in \dimen0 \defargsindent \dimen2
   %
-  % Put the type name to the right margin.
+  % The final paragraph shape:
+  \parshape \tempnum  0in \dimen0  \maybeshapeline  \defargsindent \dimen2
+  %
+  % Put the category name at the right margin.
   \noindent
   \hbox to 0pt{%
     \hfil\box0 \kern-\hsize
@@ -5507,8 +7004,16 @@
     % . this still does not fix the ?` and !` ligatures, but so far no
     %   one has made identifiers using them :).
     \df \tt
-    \def\temp{#2}% return value type
-    \ifx\temp\empty\else \tclose{\temp} \fi
+    \def\temp{#2}% text of the return type
+    \ifx\temp\empty\else
+      \tclose{\temp}% typeset the return type
+      \ifrettypeownline
+        % put return type on its own line; prohibit line break following:
+        \hfil\vadjust{\nobreak}\break  
+      \else
+        \space  % type on same line, so just followed by a space
+      \fi
+    \fi           % no return type
     #3% output function name
   }%
   {\rm\enskip}% hskip 0.5 em of \tenrm
@@ -5529,7 +7034,7 @@
   %
   % On the other hand, if an argument has two dashes (for instance), we
   % want a way to get ttsl.  Let's try @var for that.
-  \let\var=\ttslanted
+  \def\var##1{{\setupmarkupstyle{var}\ttslanted{##1}}}%
   #1%
   \sl\hyphenchar\font=45
 }
@@ -5609,12 +7114,14 @@
   \ifnum\parencount=0 \else \badparencount \fi
   \ifnum\brackcount=0 \else \badbrackcount \fi
 }
+% these should not use \errmessage; the glibc manual, at least, actually
+% has such constructs (when documenting function pointers).
 \def\badparencount{%
-  \errmessage{Unbalanced parentheses in @def}%
+  \message{Warning: unbalanced parentheses in @def...}%
   \global\parencount=0
 }
 \def\badbrackcount{%
-  \errmessage{Unbalanced square braces in @def}%
+  \message{Warning: unbalanced square brackets in @def...}%
   \global\brackcount=0
 }
 
@@ -5624,7 +7131,7 @@
 
 % To do this right we need a feature of e-TeX, \scantokens,
 % which we arrange to emulate with a temporary file in ordinary TeX.
-\ifx\eTeXversion\undefined
+\ifx\eTeXversion\thisisundefined
   \newwrite\macscribble
   \def\scantokens#1{%
     \toks0={#1}%
@@ -5635,26 +7142,30 @@
   }
 \fi
 
-\def\scanmacro#1{%
-  \begingroup
-    \newlinechar`\^^M
-    \let\xeatspaces\eatspaces
-    % Undo catcode changes of \startcontents and \doprintindex
-    % When called from @insertcopying or (short)caption, we need active
-    % backslash to get it printed correctly.  Previously, we had
-    % \catcode`\\=\other instead.  We'll see whether a problem appears
-    % with macro expansion.				--kasal, 19aug04
-    \catcode`\@=0 \catcode`\\=\active \escapechar=`\@
-    % ... and \example
-    \spaceisspace
-    %
-    % Append \endinput to make sure that TeX does not see the ending newline.
-    %
-    % I've verified that it is necessary both for e-TeX and for ordinary TeX
-    %							--kasal, 29nov03
-    \scantokens{#1\endinput}%
-  \endgroup
-}
+\def\scanmacro#1{\begingroup
+  \newlinechar`\^^M
+  \let\xeatspaces\eatspaces
+  %
+  % Undo catcode changes of \startcontents and \doprintindex
+  % When called from @insertcopying or (short)caption, we need active
+  % backslash to get it printed correctly.  Previously, we had
+  % \catcode`\\=\other instead.  We'll see whether a problem appears
+  % with macro expansion.				--kasal, 19aug04
+  \catcode`\@=0 \catcode`\\=\active \escapechar=`\@
+  %
+  % ... and for \example:
+  \spaceisspace
+  %
+  % The \empty here causes a following catcode 5 newline to be eaten as
+  % part of reading whitespace after a control sequence.  It does not
+  % eat a catcode 13 newline.  There's no good way to handle the two
+  % cases (untried: maybe e-TeX's \everyeof could help, though plain TeX
+  % would then have different behavior).  See the Macro Details node in
+  % the manual for the workaround we recommend for macros and
+  % line-oriented commands.
+  % 
+  \scantokens{#1\empty}%
+\endgroup}
 
 \def\scanexp#1{%
   \edef\temp{\noexpand\scanmacro{#1}}%
@@ -5682,7 +7193,7 @@
 % This does \let #1 = #2, with \csnames; that is,
 %   \let \csname#1\endcsname = \csname#2\endcsname
 % (except of course we have to play expansion games).
-% 
+%
 \def\cslet#1#2{%
   \expandafter\let
   \csname#1\expandafter\endcsname
@@ -5708,13 +7219,18 @@
 
 % Macro bodies are absorbed as an argument in a context where
 % all characters are catcode 10, 11 or 12, except \ which is active
-% (as in normal texinfo). It is necessary to change the definition of \.
-
+% (as in normal texinfo). It is necessary to change the definition of \
+% to recognize macro arguments; this is the job of \mbodybackslash.
+%
+% Non-ASCII encodings make 8-bit characters active, so un-activate
+% them to avoid their expansion.  Must do this non-globally, to
+% confine the change to the current group.
+%
 % It's necessary to have hard CRs when the macro is executed. This is
-% done by  making ^^M (\endlinechar) catcode 12 when reading the macro
+% done by making ^^M (\endlinechar) catcode 12 when reading the macro
 % body, and then making it the \newlinechar in \scanmacro.
-
-\def\scanctxt{%
+%
+\def\scanctxt{% used as subroutine
   \catcode`\"=\other
   \catcode`\+=\other
   \catcode`\<=\other
@@ -5724,15 +7240,16 @@
   \catcode`\_=\other
   \catcode`\|=\other
   \catcode`\~=\other
+  \ifx\declaredencoding\ascii \else \setnonasciicharscatcodenonglobal\other \fi
 }
 
-\def\scanargctxt{%
+\def\scanargctxt{% used for copying and captions, not macros.
   \scanctxt
   \catcode`\\=\other
   \catcode`\^^M=\other
 }
 
-\def\macrobodyctxt{%
+\def\macrobodyctxt{% used for @macro definitions
   \scanctxt
   \catcode`\{=\other
   \catcode`\}=\other
@@ -5740,32 +7257,56 @@
   \usembodybackslash
 }
 
-\def\macroargctxt{%
+\def\macroargctxt{% used when scanning invocations
   \scanctxt
-  \catcode`\\=\other
+  \catcode`\\=0
 }
+% why catcode 0 for \ in the above?  To recognize \\ \{ \} as "escapes"
+% for the single characters \ { }.  Thus, we end up with the "commands"
+% that would be written @\ @{ @} in a Texinfo document.
+% 
+% We already have @{ and @}.  For @\, we define it here, and only for
+% this purpose, to produce a typewriter backslash (so, the @\ that we
+% define for @math can't be used with @macro calls):
+%
+\def\\{\normalbackslash}%
+% 
+% We would like to do this for \, too, since that is what makeinfo does.
+% But it is not possible, because Texinfo already has a command @, for a
+% cedilla accent.  Documents must use @comma{} instead.
+%
+% \anythingelse will almost certainly be an error of some kind.
+
 
 % \mbodybackslash is the definition of \ in @macro bodies.
 % It maps \foo\ => \csname macarg.foo\endcsname => #N
 % where N is the macro parameter number.
 % We define \csname macarg.\endcsname to be \realbackslash, so
 % \\ in macro replacement text gets you a backslash.
-
+%
 {\catcode`@=0 @catcode`@\=@active
  @gdef@usembodybackslash{@let\=@mbodybackslash}
  @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname}
 }
 \expandafter\def\csname macarg.\endcsname{\realbackslash}
 
+\def\margbackslash#1{\char`\#1 }
+
 \def\macro{\recursivefalse\parsearg\macroxxx}
 \def\rmacro{\recursivetrue\parsearg\macroxxx}
 
 \def\macroxxx#1{%
-  \getargs{#1}%           now \macname is the macname and \argl the arglist
+  \getargs{#1}% now \macname is the macname and \argl the arglist
   \ifx\argl\empty       % no arguments
-     \paramno=0%
+     \paramno=0\relax
   \else
      \expandafter\parsemargdef \argl;%
+     \if\paramno>256\relax
+       \ifx\eTeXversion\thisisundefined
+         \errhelp = \EMsimple
+         \errmessage{You need eTeX to compile a file with macros with more than 256 arguments}
+       \fi
+     \fi
   \fi
   \if1\csname ismacro.\the\macname\endcsname
      \message{Warning: redefining \the\macname}%
@@ -5812,46 +7353,269 @@
 % an opening brace, and that opening brace is not consumed.
 \def\getargs#1{\getargsxxx#1{}}
 \def\getargsxxx#1#{\getmacname #1 \relax\getmacargs}
-\def\getmacname #1 #2\relax{\macname={#1}}
+\def\getmacname#1 #2\relax{\macname={#1}}
 \def\getmacargs#1{\def\argl{#1}}
 
-% Parse the optional {params} list.  Set up \paramno and \paramlist
-% so \defmacro knows what to do.  Define \macarg.blah for each blah
-% in the params list, to be ##N where N is the position in that list.
-% That gets used by \mbodybackslash (above).
+% For macro processing make @ a letter so that we can make Texinfo private macro names.
+\edef\texiatcatcode{\the\catcode`\@}
+\catcode `@=11\relax
 
+% Parse the optional {params} list.  Set up \paramno and \paramlist
+% so \defmacro knows what to do.  Define \macarg.BLAH for each BLAH
+% in the params list to some hook where the argument si to be expanded.  If
+% there are less than 10 arguments that hook is to be replaced by ##N where N
+% is the position in that list, that is to say the macro arguments are to be
+% defined `a la TeX in the macro body.  
+%
+% That gets used by \mbodybackslash (above).
+%
 % We need to get `macro parameter char #' into several definitions.
-% The technique used is stolen from LaTeX:  let \hash be something
+% The technique used is stolen from LaTeX: let \hash be something
 % unexpandable, insert that wherever you need a #, and then redefine
 % it to # just before using the token list produced.
 %
 % The same technique is used to protect \eatspaces till just before
 % the macro is used.
-
-\def\parsemargdef#1;{\paramno=0\def\paramlist{}%
-        \let\hash\relax\let\xeatspaces\relax\parsemargdefxxx#1,;,}
+%
+% If there are 10 or more arguments, a different technique is used, where the
+% hook remains in the body, and when macro is to be expanded the body is
+% processed again to replace the arguments.
+%
+% In that case, the hook is \the\toks N-1, and we simply set \toks N-1 to the
+% argument N value and then \edef  the body (nothing else will expand because of
+% the catcode regime underwhich the body was input).
+%
+% If you compile with TeX (not eTeX), and you have macros with 10 or more
+% arguments, you need that no macro has more than 256 arguments, otherwise an
+% error is produced.
+\def\parsemargdef#1;{%
+  \paramno=0\def\paramlist{}%
+  \let\hash\relax
+  \let\xeatspaces\relax
+  \parsemargdefxxx#1,;,%
+  % In case that there are 10 or more arguments we parse again the arguments
+  % list to set new definitions for the \macarg.BLAH macros corresponding to
+  % each BLAH argument. It was anyhow needed to parse already once this list
+  % in order to count the arguments, and as macros with at most 9 arguments
+  % are by far more frequent than macro with 10 or more arguments, defining
+  % twice the \macarg.BLAH macros does not cost too much processing power.
+  \ifnum\paramno<10\relax\else
+    \paramno0\relax
+    \parsemmanyargdef@@#1,;,% 10 or more arguments
+  \fi
+}
 \def\parsemargdefxxx#1,{%
   \if#1;\let\next=\relax
   \else \let\next=\parsemargdefxxx
-    \advance\paramno by 1%
+    \advance\paramno by 1
     \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname
         {\xeatspaces{\hash\the\paramno}}%
     \edef\paramlist{\paramlist\hash\the\paramno,}%
   \fi\next}
 
+\def\parsemmanyargdef@@#1,{%
+  \if#1;\let\next=\relax
+  \else 
+    \let\next=\parsemmanyargdef@@
+    \edef\tempb{\eatspaces{#1}}%
+    \expandafter\def\expandafter\tempa
+       \expandafter{\csname macarg.\tempb\endcsname}%
+    % Note that we need some extra \noexpand\noexpand, this is because we
+    % don't want \the  to be expanded in the \parsermacbody  as it uses an
+    % \xdef .
+    \expandafter\edef\tempa
+      {\noexpand\noexpand\noexpand\the\toks\the\paramno}%
+    \advance\paramno by 1\relax
+  \fi\next}
+
 % These two commands read recursive and nonrecursive macro bodies.
 % (They're different since rec and nonrec macros end differently.)
+%
 
+\catcode `\@\texiatcatcode
 \long\def\parsemacbody#1@end macro%
 {\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
 \long\def\parsermacbody#1@end rmacro%
 {\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
+\catcode `\@=11\relax
 
-% This defines the macro itself. There are six cases: recursive and
-% nonrecursive macros of zero, one, and many arguments.
+\let\endargs@\relax
+\let\nil@\relax
+\def\nilm@{\nil@}%
+\long\def\nillm@{\nil@}%
+
+% This macro is expanded during the Texinfo macro expansion, not during its
+% definition.  It gets all the arguments values and assigns them to macros
+% macarg.ARGNAME
+%
+% #1 is the macro name
+% #2 is the list of argument names
+% #3 is the list of argument values
+\def\getargvals@#1#2#3{%
+  \def\macargdeflist@{}%
+  \def\saveparamlist@{#2}% Need to keep a copy for parameter expansion.
+  \def\paramlist{#2,\nil@}%
+  \def\macroname{#1}%
+  \begingroup
+  \macroargctxt
+  \def\argvaluelist{#3,\nil@}%
+  \def\@tempa{#3}%
+  \ifx\@tempa\empty
+    \setemptyargvalues@
+  \else
+    \getargvals@@
+  \fi
+}
+
+% 
+\def\getargvals@@{%
+  \ifx\paramlist\nilm@
+      % Some sanity check needed here that \argvaluelist is also empty.
+      \ifx\argvaluelist\nillm@
+      \else
+        \errhelp = \EMsimple
+        \errmessage{Too many arguments in macro `\macroname'!}%
+      \fi
+      \let\next\macargexpandinbody@
+  \else
+    \ifx\argvaluelist\nillm@
+       % No more arguments values passed to macro.  Set remaining named-arg
+       % macros to empty.
+       \let\next\setemptyargvalues@
+    \else
+      % pop current arg name into \@tempb
+      \def\@tempa##1{\pop@{\@tempb}{\paramlist}##1\endargs@}%
+      \expandafter\@tempa\expandafter{\paramlist}%
+       % pop current argument value into \@tempc
+      \def\@tempa##1{\longpop@{\@tempc}{\argvaluelist}##1\endargs@}%
+      \expandafter\@tempa\expandafter{\argvaluelist}%
+       % Here \@tempb is the current arg name and \@tempc is the current arg value.
+       % First place the new argument macro definition into \@tempd
+       \expandafter\macname\expandafter{\@tempc}%
+       \expandafter\let\csname macarg.\@tempb\endcsname\relax
+       \expandafter\def\expandafter\@tempe\expandafter{%
+         \csname macarg.\@tempb\endcsname}%
+       \edef\@tempd{\long\def\@tempe{\the\macname}}%
+       \push@\@tempd\macargdeflist@
+       \let\next\getargvals@@
+    \fi
+  \fi
+  \next
+}
+
+\def\push@#1#2{%
+  \expandafter\expandafter\expandafter\def
+  \expandafter\expandafter\expandafter#2%
+  \expandafter\expandafter\expandafter{%
+  \expandafter#1#2}%
+}
+
+% Replace arguments by their values in the macro body, and place the result
+% in macro \@tempa
+\def\macvalstoargs@{%
+  %  To do this we use the property that token registers that are \the'ed
+  % within an \edef  expand only once. So we are going to place all argument
+  % values into respective token registers.
+  %
+  % First we save the token context, and initialize argument numbering.
+  \begingroup
+    \paramno0\relax
+    % Then, for each argument number #N, we place the corresponding argument
+    % value into a new token list register \toks#N
+    \expandafter\putargsintokens@\saveparamlist@,;,%
+    % Then, we expand the body so that argument are replaced by their
+    % values. The trick for values not to be expanded themselves is that they
+    % are within tokens and that tokens expand only once in an \edef .
+    \edef\@tempc{\csname mac.\macroname .body\endcsname}%
+    % Now we restore the token stack pointer to free the token list registers
+    % which we have used, but we make sure that expanded body is saved after
+    % group.
+    \expandafter
+  \endgroup
+  \expandafter\def\expandafter\@tempa\expandafter{\@tempc}%
+  }
+
+\def\macargexpandinbody@{% 
+  %% Define the named-macro outside of this group and then close this group. 
+  \expandafter
+  \endgroup
+  \macargdeflist@
+  % First the replace in body the macro arguments by their values, the result
+  % is in \@tempa .
+  \macvalstoargs@
+  % Then we point at the \norecurse or \gobble (for recursive) macro value
+  % with \@tempb .
+  \expandafter\let\expandafter\@tempb\csname mac.\macroname .recurse\endcsname
+  % Depending on whether it is recursive or not, we need some tailing
+  % \egroup .
+  \ifx\@tempb\gobble
+     \let\@tempc\relax
+  \else
+     \let\@tempc\egroup
+  \fi
+  % And now we do the real job:
+  \edef\@tempd{\noexpand\@tempb{\macroname}\noexpand\scanmacro{\@tempa}\@tempc}%
+  \@tempd
+}
+
+\def\putargsintokens@#1,{%
+  \if#1;\let\next\relax
+  \else
+    \let\next\putargsintokens@
+    % First we allocate the new token list register, and give it a temporary
+    % alias \@tempb .
+    \toksdef\@tempb\the\paramno
+    % Then we place the argument value into that token list register.
+    \expandafter\let\expandafter\@tempa\csname macarg.#1\endcsname
+    \expandafter\@tempb\expandafter{\@tempa}%
+    \advance\paramno by 1\relax
+  \fi
+  \next
+}
+
+% Save the token stack pointer into macro #1
+\def\texisavetoksstackpoint#1{\edef#1{\the\@cclvi}}
+% Restore the token stack pointer from number in macro #1
+\def\texirestoretoksstackpoint#1{\expandafter\mathchardef\expandafter\@cclvi#1\relax}
+% newtoks that can be used non \outer .
+\def\texinonouternewtoks{\alloc@ 5\toks \toksdef \@cclvi}
+
+% Tailing missing arguments are set to empty
+\def\setemptyargvalues@{%
+  \ifx\paramlist\nilm@
+    \let\next\macargexpandinbody@
+  \else
+    \expandafter\setemptyargvaluesparser@\paramlist\endargs@
+    \let\next\setemptyargvalues@
+  \fi
+  \next
+}
+
+\def\setemptyargvaluesparser@#1,#2\endargs@{%
+  \expandafter\def\expandafter\@tempa\expandafter{%
+    \expandafter\def\csname macarg.#1\endcsname{}}%
+  \push@\@tempa\macargdeflist@
+  \def\paramlist{#2}%
+}
+
+% #1 is the element target macro
+% #2 is the list macro
+% #3,#4\endargs@ is the list value
+\def\pop@#1#2#3,#4\endargs@{%
+   \def#1{#3}%
+   \def#2{#4}%
+}
+\long\def\longpop@#1#2#3,#4\endargs@{%
+   \long\def#1{#3}%
+   \long\def#2{#4}%
+}
+
+% This defines a Texinfo @macro. There are eight cases: recursive and
+% nonrecursive macros of zero, one, up to nine, and many arguments.
 % Much magic with \expandafter here.
 % \xdef is used so that macro definitions will survive the file
 % they're defined in; @include reads the file inside a group.
+%
 \def\defmacro{%
   \let\hash=##% convert placeholders to macro parameter chars
   \ifrecursive
@@ -5866,17 +7630,25 @@
          \expandafter\noexpand\csname\the\macname xxx\endcsname}%
       \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
          \egroup\noexpand\scanmacro{\temp}}%
-    \else % many
-      \expandafter\xdef\csname\the\macname\endcsname{%
-         \bgroup\noexpand\macroargctxt
-         \noexpand\csname\the\macname xx\endcsname}%
-      \expandafter\xdef\csname\the\macname xx\endcsname##1{%
-          \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
-      \expandafter\expandafter
-      \expandafter\xdef
-      \expandafter\expandafter
-        \csname\the\macname xxx\endcsname
-          \paramlist{\egroup\noexpand\scanmacro{\temp}}%
+    \else
+      \ifnum\paramno<10\relax % at most 9
+        \expandafter\xdef\csname\the\macname\endcsname{%
+           \bgroup\noexpand\macroargctxt
+           \noexpand\csname\the\macname xx\endcsname}%
+        \expandafter\xdef\csname\the\macname xx\endcsname##1{%
+            \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
+        \expandafter\expandafter
+        \expandafter\xdef
+        \expandafter\expandafter
+          \csname\the\macname xxx\endcsname
+            \paramlist{\egroup\noexpand\scanmacro{\temp}}%
+      \else % 10 or more
+        \expandafter\xdef\csname\the\macname\endcsname{%
+          \noexpand\getargvals@{\the\macname}{\argl}%
+        }%    
+        \global\expandafter\let\csname mac.\the\macname .body\endcsname\temp
+        \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\gobble
+      \fi
     \fi
   \else
     \ifcase\paramno
@@ -5893,39 +7665,51 @@
         \egroup
         \noexpand\norecurse{\the\macname}%
         \noexpand\scanmacro{\temp}\egroup}%
-    \else % many
-      \expandafter\xdef\csname\the\macname\endcsname{%
-         \bgroup\noexpand\macroargctxt
-         \expandafter\noexpand\csname\the\macname xx\endcsname}%
-      \expandafter\xdef\csname\the\macname xx\endcsname##1{%
-          \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
-      \expandafter\expandafter
-      \expandafter\xdef
-      \expandafter\expandafter
-      \csname\the\macname xxx\endcsname
-      \paramlist{%
-          \egroup
-          \noexpand\norecurse{\the\macname}%
-          \noexpand\scanmacro{\temp}\egroup}%
+    \else % at most 9
+      \ifnum\paramno<10\relax
+        \expandafter\xdef\csname\the\macname\endcsname{%
+           \bgroup\noexpand\macroargctxt
+           \expandafter\noexpand\csname\the\macname xx\endcsname}%
+        \expandafter\xdef\csname\the\macname xx\endcsname##1{%
+            \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
+        \expandafter\expandafter
+        \expandafter\xdef
+        \expandafter\expandafter
+        \csname\the\macname xxx\endcsname
+        \paramlist{%
+            \egroup
+            \noexpand\norecurse{\the\macname}%
+            \noexpand\scanmacro{\temp}\egroup}%
+      \else % 10 or more:
+        \expandafter\xdef\csname\the\macname\endcsname{%
+          \noexpand\getargvals@{\the\macname}{\argl}%
+        }%
+        \global\expandafter\let\csname mac.\the\macname .body\endcsname\temp
+        \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\norecurse
+      \fi
     \fi
   \fi}
 
+\catcode `\@\texiatcatcode\relax
+
 \def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}}
 
 % \braceorline decides whether the next nonwhitespace character is a
 % {.  If so it reads up to the closing }, if not, it reads the whole
 % line.  Whatever was read is then fed to the next control sequence
-% as an argument (by \parsebrace or \parsearg)
-\def\braceorline#1{\let\next=#1\futurelet\nchar\braceorlinexxx}
+% as an argument (by \parsebrace or \parsearg).
+% 
+\def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx}
 \def\braceorlinexxx{%
   \ifx\nchar\bgroup\else
     \expandafter\parsearg
-  \fi \next}
+  \fi \macnamexxx}
 
 
 % @alias.
 % We need some trickery to remove the optional spaces around the equal
-% sign.  Just make them active and then expand them all to nothing.
+% sign.  Make them active and then expand them all to nothing.
+%
 \def\alias{\parseargusing\obeyspaces\aliasxxx}
 \def\aliasxxx #1{\aliasyyy#1\relax}
 \def\aliasyyy #1=#2\relax{%
@@ -5941,13 +7725,13 @@
 \message{cross references,}
 
 \newwrite\auxfile
-
 \newif\ifhavexrefs    % True if xref values are known.
 \newif\ifwarnedxrefs  % True if we warned once that they aren't known.
 
 % @inforef is relatively simple.
 \def\inforef #1{\inforefzzz #1,,,,**}
-\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
+\def\inforefzzz #1,#2,#3,#4**{%
+  \putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
   node \samp{\ignorespaces#1{}}}
 
 % @node's only job in TeX is to define \lastnode, which is used in
@@ -5986,7 +7770,7 @@
 
 % \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an
 % anchor), which consists of three parts:
-% 1) NAME-title - the current sectioning name taken from \thissection,
+% 1) NAME-title - the current sectioning name taken from \lastsection,
 %                 or the anchor name.
 % 2) NAME-snt   - section number and type, passed as the SNT arg, or
 %                 empty for anchors.
@@ -6005,14 +7789,35 @@
 	\write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef
 	  ##1}{##2}}% these are parameters of \writexrdef
       }%
-      \toks0 = \expandafter{\thissection}%
+      \toks0 = \expandafter{\lastsection}%
       \immediate \writexrdef{title}{\the\toks0 }%
       \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc.
-      \writexrdef{pg}{\folio}% will be written later, during \shipout
+      \safewhatsit{\writexrdef{pg}{\folio}}% will be written later, at \shipout
     }%
   \fi
 }
 
+% @xrefautosectiontitle on|off says whether @section(ing) names are used
+% automatically in xrefs, if the third arg is not explicitly specified.
+% This was provided as a "secret" @set xref-automatic-section-title
+% variable, now it's official.
+% 
+\parseargdef\xrefautomaticsectiontitle{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETxref-automatic-section-title\endcsname
+      = \empty
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETxref-automatic-section-title\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @xrefautomaticsectiontitle value `\temp',
+                must be on|off}%
+  \fi\fi
+}
+
+% 
 % @xref, @pxref, and @ref generate cross-references.  For \xrefX, #1 is
 % the node name, #2 the name of the Info cross-reference, #3 the printed
 % node name, #4 the name of the Info file, #5 the name of the printed
@@ -6021,26 +7826,41 @@
 \def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
 \def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
 \def\ref#1{\xrefX[#1,,,,,,,]}
+%
+\newbox\toprefbox
+\newbox\printedrefnamebox
+\newbox\infofilenamebox
+\newbox\printedmanualbox
+%
 \def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
   \unsepspaces
-  \def\printedmanual{\ignorespaces #5}%
+  %
+  % Get args without leading/trailing spaces.
   \def\printedrefname{\ignorespaces #3}%
-  \setbox1=\hbox{\printedmanual\unskip}%
-  \setbox0=\hbox{\printedrefname\unskip}%
-  \ifdim \wd0 = 0pt
+  \setbox\printedrefnamebox = \hbox{\printedrefname\unskip}%
+  %
+  \def\infofilename{\ignorespaces #4}%
+  \setbox\infofilenamebox = \hbox{\infofilename\unskip}%
+  %
+  \def\printedmanual{\ignorespaces #5}%
+  \setbox\printedmanualbox  = \hbox{\printedmanual\unskip}%
+  %
+  % If the printed reference name (arg #3) was not explicitly given in
+  % the @xref, figure out what we want to use.
+  \ifdim \wd\printedrefnamebox = 0pt
     % No printed node name was explicitly given.
-    \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax
-      % Use the node name inside the square brackets.
+    \expandafter\ifx\csname SETxref-automatic-section-title\endcsname \relax
+      % Not auto section-title: use node name inside the square brackets.
       \def\printedrefname{\ignorespaces #1}%
     \else
-      % Use the actual chapter/section title appear inside
-      % the square brackets.  Use the real section title if we have it.
-      \ifdim \wd1 > 0pt
-        % It is in another manual, so we don't have it.
+      % Auto section-title: use chapter/section title inside
+      % the square brackets if we have it.
+      \ifdim \wd\printedmanualbox > 0pt
+        % It is in another manual, so we don't have it; use node name.
         \def\printedrefname{\ignorespaces #1}%
       \else
         \ifhavexrefs
-          % We know the real title if we have the xref values.
+          % We (should) know the real title if we have the xref values.
           \def\printedrefname{\refx{#1-title}{}}%
         \else
           % Otherwise just copy the Info node name.
@@ -6052,22 +7872,32 @@
   %
   % Make link in pdf output.
   \ifpdf
-    \leavevmode
-    \getfilename{#4}%
-    {\turnoffactive
-     % See comments at \activebackslashdouble.
-     {\activebackslashdouble \xdef\pdfxrefdest{#1}%
-      \backslashparens\pdfxrefdest}%
+    {\indexnofonts
+     \turnoffactive
+     \makevalueexpandable
+     % This expands tokens, so do it after making catcode changes, so _
+     % etc. don't get their TeX definitions.  This ignores all spaces in
+     % #4, including (wrongly) those in the middle of the filename.
+     \getfilename{#4}%
      %
-     \ifnum\filenamelength>0
-       \startlink attr{/Border [0 0 0]}%
-         goto file{\the\filename.pdf} name{\pdfxrefdest}%
+     % This (wrongly) does not take account of leading or trailing
+     % spaces in #1, which should be ignored.
+     \edef\pdfxrefdest{#1}%
+     \ifx\pdfxrefdest\empty
+       \def\pdfxrefdest{Top}% no empty targets
      \else
-       \startlink attr{/Border [0 0 0]}%
-         goto name{\pdfmkpgn{\pdfxrefdest}}%
+       \txiescapepdf\pdfxrefdest  % escape PDF special chars
+     \fi
+     %
+     \leavevmode
+     \startlink attr{/Border [0 0 0]}%
+     \ifnum\filenamelength>0
+       goto file{\the\filename.pdf} name{\pdfxrefdest}%
+     \else
+       goto name{\pdfmkpgn{\pdfxrefdest}}%
      \fi
     }%
-    \linkcolor
+    \setcolor{\linkcolor}%
   \fi
   %
   % Float references are printed completely differently: "Figure 1.2"
@@ -6084,29 +7914,42 @@
   \iffloat\Xthisreftitle
     % If the user specified the print name (third arg) to the ref,
     % print it instead of our usual "Figure 1.2".
-    \ifdim\wd0 = 0pt
-      \refx{#1-snt}%
+    \ifdim\wd\printedrefnamebox = 0pt
+      \refx{#1-snt}{}%
     \else
       \printedrefname
     \fi
     %
-    % if the user also gave the printed manual name (fifth arg), append
+    % If the user also gave the printed manual name (fifth arg), append
     % "in MANUALNAME".
-    \ifdim \wd1 > 0pt
+    \ifdim \wd\printedmanualbox > 0pt
       \space \putwordin{} \cite{\printedmanual}%
     \fi
   \else
     % node/anchor (non-float) references.
+    % 
+    % If we use \unhbox to print the node names, TeX does not insert
+    % empty discretionaries after hyphens, which means that it will not
+    % find a line break at a hyphen in a node names.  Since some manuals
+    % are best written with fairly long node names, containing hyphens,
+    % this is a loss.  Therefore, we give the text of the node name
+    % again, so it is as if TeX is seeing it for the first time.
+    % 
+    \ifdim \wd\printedmanualbox > 0pt
+      % Cross-manual reference with a printed manual name.
+      % 
+      \crossmanualxref{\cite{\printedmanual\unskip}}%
     %
-    % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
-    % insert empty discretionaries after hyphens, which means that it will
-    % not find a line break at a hyphen in a node names.  Since some manuals
-    % are best written with fairly long node names, containing hyphens, this
-    % is a loss.  Therefore, we give the text of the node name again, so it
-    % is as if TeX is seeing it for the first time.
-    \ifdim \wd1 > 0pt
-      \putwordsection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}%
+    \else\ifdim \wd\infofilenamebox > 0pt
+      % Cross-manual reference with only an info filename (arg 4), no
+      % printed manual name (arg 5).  This is essentially the same as
+      % the case above; we output the filename, since we have nothing else.
+      % 
+      \crossmanualxref{\code{\infofilename\unskip}}%
+    %
     \else
+      % Reference within this manual.
+      %
       % _ (for example) has to be the character _ for the purposes of the
       % control sequence corresponding to the node, but it has to expand
       % into the usual \leavevmode...\vrule stuff for purposes of
@@ -6118,7 +7961,7 @@
        \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
        \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
       }%
-      % output the `[mynode]' via a macro so it can be overridden.
+      % output the `[mynode]' via the macro below so it can be overridden.
       \xrefprintnodename\printedrefname
       %
       % But we always want a comma and a space:
@@ -6126,11 +7969,37 @@
       %
       % output the `page 3'.
       \turnoffactive \putwordpage\tie\refx{#1-pg}{}%
-    \fi
+    \fi\fi
   \fi
   \endlink
 \endgroup}
 
+% Output a cross-manual xref to #1.  Used just above (twice).
+% 
+% Only include the text "Section ``foo'' in" if the foo is neither
+% missing or Top.  Thus, @xref{,,,foo,The Foo Manual} outputs simply
+% "see The Foo Manual", the idea being to refer to the whole manual.
+% 
+% But, this being TeX, we can't easily compare our node name against the
+% string "Top" while ignoring the possible spaces before and after in
+% the input.  By adding the arbitrary 7sp below, we make it much less
+% likely that a real node name would have the same width as "Top" (e.g.,
+% in a monospaced font).  Hopefully it will never happen in practice.
+% 
+% For the same basic reason, we retypeset the "Top" at every
+% reference, since the current font is indeterminate.
+% 
+\def\crossmanualxref#1{%
+  \setbox\toprefbox = \hbox{Top\kern7sp}%
+  \setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}%
+  \ifdim \wd2 > 7sp  % nonempty?
+    \ifdim \wd2 = \wd\toprefbox \else  % same as Top?
+      \putwordSection{} ``\printedrefname'' \putwordin{}\space
+    \fi
+  \fi
+  #1%
+}
+
 % This macro is called from \xrefX for the `[nodename]' part of xref
 % output.  It's a separate macro only so it can be changed more easily,
 % since square brackets don't work well in some documents.  Particularly
@@ -6181,7 +8050,8 @@
     \angleleft un\-de\-fined\angleright
     \iflinks
       \ifhavexrefs
-        \message{\linenumber Undefined cross reference `#1'.}%
+        {\toks0 = {#1}% avoid expansion of possibly-complex value
+         \message{\linenumber Undefined cross reference `\the\toks0'.}}%
       \else
         \ifwarnedxrefs\else
           \global\warnedxrefstrue
@@ -6201,10 +8071,18 @@
 % collisions).  But if this is a float type, we have more work to do.
 %
 \def\xrdef#1#2{%
-  \expandafter\gdef\csname XR#1\endcsname{#2}% remember this xref value.
+  {% The node name might contain 8-bit characters, which in our current
+   % implementation are changed to commands like @'e.  Don't let these
+   % mess up the control sequence name.
+    \indexnofonts
+    \turnoffactive
+    \xdef\safexrefname{#1}%
+  }%
+  %
+  \expandafter\gdef\csname XR\safexrefname\endcsname{#2}% remember this xref
   %
   % Was that xref control sequence that we just defined for a float?
-  \expandafter\iffloat\csname XR#1\endcsname
+  \expandafter\iffloat\csname XR\safexrefname\endcsname
     % it was a float, and we have the (safe) float type in \iffloattype.
     \expandafter\let\expandafter\floatlist
       \csname floatlist\iffloattype\endcsname
@@ -6219,7 +8097,8 @@
     %
     % Remember this xref in the control sequence \floatlistFLOATTYPE,
     % for later use in \listoffloats.
-    \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0{#1}}%
+    \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0
+      {\safexrefname}}%
   \fi
 }
 
@@ -6323,6 +8202,7 @@
   \input\jobname.#1
 \endgroup}
 
+
 \message{insertions,}
 % including footnotes.
 
@@ -6335,7 +8215,7 @@
 % space to prevent strange expansion errors.)
 \def\supereject{\par\penalty -20000\footnoteno =0 }
 
-% @footnotestyle is meaningful for info output only.
+% @footnotestyle is meaningful for Info output only.
 \let\footnotestyle=\comment
 
 {\catcode `\@=11
@@ -6398,6 +8278,8 @@
   % expands into a box, it must come within the paragraph, lest it
   % provide a place where TeX can split the footnote.
   \footstrut
+  %
+  % Invoke rest of plain TeX footnote routine.
   \futurelet\next\fo@t
 }
 }%end \catcode `\@=11
@@ -6405,7 +8287,7 @@
 % In case a @footnote appears in a vbox, save the footnote text and create
 % the real \insert just after the vbox finished.  Otherwise, the insertion
 % would be lost.
-% Similarily, if a @footnote appears inside an alignment, save the footnote
+% Similarly, if a @footnote appears inside an alignment, save the footnote
 % text to a box and make the \insert when a row of the table is finished.
 % And the same can be done for other insert classes.  --kasal, 16nov03.
 
@@ -6485,7 +8367,7 @@
   it from ftp://tug.org/tex/epsf.tex.}
 %
 \def\image#1{%
-  \ifx\epsfbox\undefined
+  \ifx\epsfbox\thisisundefined
     \ifwarnednoepsf \else
       \errhelp = \noepsfhelp
       \errmessage{epsf.tex not found, images will be ignored}%
@@ -6501,7 +8383,7 @@
 % #2 is (optional) width, #3 is (optional) height.
 % #4 is (ignored optional) html alt text.
 % #5 is (ignored optional) extension.
-% #6 is just the usual extra ignored arg for parsing this stuff.
+% #6 is just the usual extra ignored arg for parsing stuff.
 \newif\ifimagevmode
 \def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup
   \catcode`\^^M = 5     % in case we're inside an example
@@ -6509,15 +8391,30 @@
   % If the image is by itself, center it.
   \ifvmode
     \imagevmodetrue
-    \nobreak\bigskip
+  \else \ifx\centersub\centerV
+    % for @center @image, we need a vbox so we can have our vertical space
+    \imagevmodetrue
+    \vbox\bgroup % vbox has better behavior than vtop herev
+  \fi\fi
+  %
+  \ifimagevmode
+    \nobreak\medskip
     % Usually we'll have text after the image which will insert
     % \parskip glue, so insert it here too to equalize the space
     % above and below.
     \nobreak\vskip\parskip
     \nobreak
-    \line\bgroup\hss
   \fi
   %
+  % Leave vertical mode so that indentation from an enclosing
+  %  environment such as @quotation is respected.
+  % However, if we're at the top level, we don't want the
+  %  normal paragraph indentation.
+  % On the other hand, if we are in the case of @center @image, we don't
+  %  want to start a paragraph, which will create a hsize-width box and
+  %  eradicate the centering.
+  \ifx\centersub\centerV\else \noindent \fi
+  %
   % Output the image.
   \ifpdf
     \dopdfimage{#1}{#2}{#3}%
@@ -6528,7 +8425,10 @@
     \epsfbox{#1.eps}%
   \fi
   %
-  \ifimagevmode \hss \egroup \bigbreak \fi  % space after the image
+  \ifimagevmode
+    \medskip  % space after a standalone image
+  \fi  
+  \ifx\centersub\centerV \egroup \fi
 \endgroup}
 
 
@@ -6595,13 +8495,13 @@
       \global\advance\floatno by 1
       %
       {%
-        % This magic value for \thissection is output by \setref as the
+        % This magic value for \lastsection is output by \setref as the
         % XREFLABEL-title value.  \xrefX uses it to distinguish float
         % labels (which have a completely different output format) from
         % node and anchor labels.  And \xrdef uses it to construct the
         % lists of floats.
         %
-        \edef\thissection{\floatmagic=\safefloattype}%
+        \edef\lastsection{\floatmagic=\safefloattype}%
         \setref{\floatlabel}{Yfloat}%
       }%
     \fi
@@ -6669,6 +8569,7 @@
       % caption if specified, else the full caption if specified, else nothing.
       {%
         \atdummies
+        %
         % since we read the caption text in the macro world, where ^^M
         % is turned into a normal character, we have to scan it back, so
         % we don't write the literal three characters "^^M" into the aux file.
@@ -6689,8 +8590,9 @@
   %
   % place the captured inserts
   %
-  % BEWARE: when the floats start float, we have to issue warning whenever an
-  % insert appears inside a float which could possibly float. --kasal, 26may04
+  % BEWARE: when the floats start floating, we have to issue warning
+  % whenever an insert appears inside a float which could possibly
+  % float. --kasal, 26may04
   %
   \checkinserts
 }
@@ -6734,7 +8636,7 @@
 
 % #1 is the control sequence we are passed; we expand into a conditional
 % which is true if #1 represents a float ref.  That is, the magic
-% \thissection value which we \setref above.
+% \lastsection value which we \setref above.
 %
 \def\iffloat#1{\expandafter\doiffloat#1==\finish}
 %
@@ -6795,39 +8697,909 @@
   \writeentry
 }}
 
-\message{localization,}
-% and i18n.
 
-% @documentlanguage is usually given very early, just after
-% @setfilename.  If done too late, it may not override everything
-% properly.  Single argument is the language abbreviation.
-% It would be nice if we could set up a hyphenation file here.
+\message{localization,}
+
+% For single-language documents, @documentlanguage is usually given very
+% early, just after @documentencoding.  Single argument is the language
+% (de) or locale (de_DE) abbreviation.
 %
-\parseargdef\documentlanguage{%
+{
+  \catcode`\_ = \active
+  \globaldefs=1
+\parseargdef\documentlanguage{\begingroup
+  \let_=\normalunderscore  % normal _ character for filenames
   \tex % read txi-??.tex file in plain TeX.
-    % Read the file if it exists.
+    % Read the file by the name they passed if it exists.
     \openin 1 txi-#1.tex
     \ifeof 1
-      \errhelp = \nolanghelp
-      \errmessage{Cannot read language file txi-#1.tex}%
+      \documentlanguagetrywithoutunderscore{#1_\finish}%
     \else
+      \globaldefs = 1  % everything in the txi-LL files needs to persist
       \input txi-#1.tex
     \fi
     \closein 1
-  \endgroup
-}
-\newhelp\nolanghelp{The given language definition file cannot be found or
-is empty.  Maybe you need to install it?  In the current directory
-should work if nowhere else does.}
-
-
-% @documentencoding should change something in TeX eventually, most
-% likely, but for now just recognize it.
-\let\documentencoding = \comment
-
-
-% Page size parameters.
+  \endgroup % end raw TeX
+\endgroup}
 %
+% If they passed de_DE, and txi-de_DE.tex doesn't exist,
+% try txi-de.tex.
+%
+\gdef\documentlanguagetrywithoutunderscore#1_#2\finish{%
+  \openin 1 txi-#1.tex
+  \ifeof 1
+    \errhelp = \nolanghelp
+    \errmessage{Cannot read language file txi-#1.tex}%
+  \else
+    \globaldefs = 1  % everything in the txi-LL files needs to persist
+    \input txi-#1.tex
+  \fi
+  \closein 1
+}
+}% end of special _ catcode
+%
+\newhelp\nolanghelp{The given language definition file cannot be found or
+is empty.  Maybe you need to install it?  Putting it in the current
+directory should work if nowhere else does.}
+
+% This macro is called from txi-??.tex files; the first argument is the
+% \language name to set (without the "\lang@" prefix), the second and
+% third args are \{left,right}hyphenmin.
+%
+% The language names to pass are determined when the format is built.
+% See the etex.log file created at that time, e.g.,
+% /usr/local/texlive/2008/texmf-var/web2c/pdftex/etex.log.
+%
+% With TeX Live 2008, etex now includes hyphenation patterns for all
+% available languages.  This means we can support hyphenation in
+% Texinfo, at least to some extent.  (This still doesn't solve the
+% accented characters problem.)
+%
+\catcode`@=11
+\def\txisetlanguage#1#2#3{%
+  % do not set the language if the name is undefined in the current TeX.
+  \expandafter\ifx\csname lang@#1\endcsname \relax
+    \message{no patterns for #1}%
+  \else
+    \global\language = \csname lang@#1\endcsname
+  \fi
+  % but there is no harm in adjusting the hyphenmin values regardless.
+  \global\lefthyphenmin = #2\relax
+  \global\righthyphenmin = #3\relax
+}
+
+% Helpers for encodings.
+% Set the catcode of characters 128 through 255 to the specified number.
+%
+\def\setnonasciicharscatcode#1{%
+   \count255=128
+   \loop\ifnum\count255<256
+      \global\catcode\count255=#1\relax
+      \advance\count255 by 1
+   \repeat
+}
+
+\def\setnonasciicharscatcodenonglobal#1{%
+   \count255=128
+   \loop\ifnum\count255<256
+      \catcode\count255=#1\relax
+      \advance\count255 by 1
+   \repeat
+}
+
+% @documentencoding sets the definition of non-ASCII characters
+% according to the specified encoding.
+%
+\parseargdef\documentencoding{%
+  % Encoding being declared for the document.
+  \def\declaredencoding{\csname #1.enc\endcsname}%
+  %
+  % Supported encodings: names converted to tokens in order to be able
+  % to compare them with \ifx.
+  \def\ascii{\csname US-ASCII.enc\endcsname}%
+  \def\latnine{\csname ISO-8859-15.enc\endcsname}%
+  \def\latone{\csname ISO-8859-1.enc\endcsname}%
+  \def\lattwo{\csname ISO-8859-2.enc\endcsname}%
+  \def\utfeight{\csname UTF-8.enc\endcsname}%
+  %
+  \ifx \declaredencoding \ascii
+     \asciichardefs
+  %
+  \else \ifx \declaredencoding \lattwo
+     \setnonasciicharscatcode\active
+     \lattwochardefs
+  %
+  \else \ifx \declaredencoding \latone
+     \setnonasciicharscatcode\active
+     \latonechardefs
+  %
+  \else \ifx \declaredencoding \latnine
+     \setnonasciicharscatcode\active
+     \latninechardefs
+  %
+  \else \ifx \declaredencoding \utfeight
+     \setnonasciicharscatcode\active
+     \utfeightchardefs
+  %
+  \else
+    \message{Unknown document encoding #1, ignoring.}%
+  %
+  \fi % utfeight
+  \fi % latnine
+  \fi % latone
+  \fi % lattwo
+  \fi % ascii
+}
+
+% A message to be logged when using a character that isn't available
+% the default font encoding (OT1).
+%
+\def\missingcharmsg#1{\message{Character missing in OT1 encoding: #1.}}
+
+% Take account of \c (plain) vs. \, (Texinfo) difference.
+\def\cedilla#1{\ifx\c\ptexc\c{#1}\else\,{#1}\fi}
+
+% First, make active non-ASCII characters in order for them to be
+% correctly categorized when TeX reads the replacement text of
+% macros containing the character definitions.
+\setnonasciicharscatcode\active
+%
+% Latin1 (ISO-8859-1) character definitions.
+\def\latonechardefs{%
+  \gdef^^a0{\tie}
+  \gdef^^a1{\exclamdown}
+  \gdef^^a2{\missingcharmsg{CENT SIGN}}
+  \gdef^^a3{{\pounds}}
+  \gdef^^a4{\missingcharmsg{CURRENCY SIGN}}
+  \gdef^^a5{\missingcharmsg{YEN SIGN}}
+  \gdef^^a6{\missingcharmsg{BROKEN BAR}}
+  \gdef^^a7{\S}
+  \gdef^^a8{\"{}}
+  \gdef^^a9{\copyright}
+  \gdef^^aa{\ordf}
+  \gdef^^ab{\guillemetleft}
+  \gdef^^ac{$\lnot$}
+  \gdef^^ad{\-}
+  \gdef^^ae{\registeredsymbol}
+  \gdef^^af{\={}}
+  %
+  \gdef^^b0{\textdegree}
+  \gdef^^b1{$\pm$}
+  \gdef^^b2{$^2$}
+  \gdef^^b3{$^3$}
+  \gdef^^b4{\'{}}
+  \gdef^^b5{$\mu$}
+  \gdef^^b6{\P}
+  %
+  \gdef^^b7{$^.$}
+  \gdef^^b8{\cedilla\ }
+  \gdef^^b9{$^1$}
+  \gdef^^ba{\ordm}
+  %
+  \gdef^^bb{\guillemetright}
+  \gdef^^bc{$1\over4$}
+  \gdef^^bd{$1\over2$}
+  \gdef^^be{$3\over4$}
+  \gdef^^bf{\questiondown}
+  %
+  \gdef^^c0{\`A}
+  \gdef^^c1{\'A}
+  \gdef^^c2{\^A}
+  \gdef^^c3{\~A}
+  \gdef^^c4{\"A}
+  \gdef^^c5{\ringaccent A}
+  \gdef^^c6{\AE}
+  \gdef^^c7{\cedilla C}
+  \gdef^^c8{\`E}
+  \gdef^^c9{\'E}
+  \gdef^^ca{\^E}
+  \gdef^^cb{\"E}
+  \gdef^^cc{\`I}
+  \gdef^^cd{\'I}
+  \gdef^^ce{\^I}
+  \gdef^^cf{\"I}
+  %
+  \gdef^^d0{\DH}
+  \gdef^^d1{\~N}
+  \gdef^^d2{\`O}
+  \gdef^^d3{\'O}
+  \gdef^^d4{\^O}
+  \gdef^^d5{\~O}
+  \gdef^^d6{\"O}
+  \gdef^^d7{$\times$}
+  \gdef^^d8{\O}
+  \gdef^^d9{\`U}
+  \gdef^^da{\'U}
+  \gdef^^db{\^U}
+  \gdef^^dc{\"U}
+  \gdef^^dd{\'Y}
+  \gdef^^de{\TH}
+  \gdef^^df{\ss}
+  %
+  \gdef^^e0{\`a}
+  \gdef^^e1{\'a}
+  \gdef^^e2{\^a}
+  \gdef^^e3{\~a}
+  \gdef^^e4{\"a}
+  \gdef^^e5{\ringaccent a}
+  \gdef^^e6{\ae}
+  \gdef^^e7{\cedilla c}
+  \gdef^^e8{\`e}
+  \gdef^^e9{\'e}
+  \gdef^^ea{\^e}
+  \gdef^^eb{\"e}
+  \gdef^^ec{\`{\dotless i}}
+  \gdef^^ed{\'{\dotless i}}
+  \gdef^^ee{\^{\dotless i}}
+  \gdef^^ef{\"{\dotless i}}
+  %
+  \gdef^^f0{\dh}
+  \gdef^^f1{\~n}
+  \gdef^^f2{\`o}
+  \gdef^^f3{\'o}
+  \gdef^^f4{\^o}
+  \gdef^^f5{\~o}
+  \gdef^^f6{\"o}
+  \gdef^^f7{$\div$}
+  \gdef^^f8{\o}
+  \gdef^^f9{\`u}
+  \gdef^^fa{\'u}
+  \gdef^^fb{\^u}
+  \gdef^^fc{\"u}
+  \gdef^^fd{\'y}
+  \gdef^^fe{\th}
+  \gdef^^ff{\"y}
+}
+
+% Latin9 (ISO-8859-15) encoding character definitions.
+\def\latninechardefs{%
+  % Encoding is almost identical to Latin1.
+  \latonechardefs
+  %
+  \gdef^^a4{\euro}
+  \gdef^^a6{\v S}
+  \gdef^^a8{\v s}
+  \gdef^^b4{\v Z}
+  \gdef^^b8{\v z}
+  \gdef^^bc{\OE}
+  \gdef^^bd{\oe}
+  \gdef^^be{\"Y}
+}
+
+% Latin2 (ISO-8859-2) character definitions.
+\def\lattwochardefs{%
+  \gdef^^a0{\tie}
+  \gdef^^a1{\ogonek{A}}
+  \gdef^^a2{\u{}}
+  \gdef^^a3{\L}
+  \gdef^^a4{\missingcharmsg{CURRENCY SIGN}}
+  \gdef^^a5{\v L}
+  \gdef^^a6{\'S}
+  \gdef^^a7{\S}
+  \gdef^^a8{\"{}}
+  \gdef^^a9{\v S}
+  \gdef^^aa{\cedilla S}
+  \gdef^^ab{\v T}
+  \gdef^^ac{\'Z}
+  \gdef^^ad{\-}
+  \gdef^^ae{\v Z}
+  \gdef^^af{\dotaccent Z}
+  %
+  \gdef^^b0{\textdegree}
+  \gdef^^b1{\ogonek{a}}
+  \gdef^^b2{\ogonek{ }}
+  \gdef^^b3{\l}
+  \gdef^^b4{\'{}}
+  \gdef^^b5{\v l}
+  \gdef^^b6{\'s}
+  \gdef^^b7{\v{}}
+  \gdef^^b8{\cedilla\ }
+  \gdef^^b9{\v s}
+  \gdef^^ba{\cedilla s}
+  \gdef^^bb{\v t}
+  \gdef^^bc{\'z}
+  \gdef^^bd{\H{}}
+  \gdef^^be{\v z}
+  \gdef^^bf{\dotaccent z}
+  %
+  \gdef^^c0{\'R}
+  \gdef^^c1{\'A}
+  \gdef^^c2{\^A}
+  \gdef^^c3{\u A}
+  \gdef^^c4{\"A}
+  \gdef^^c5{\'L}
+  \gdef^^c6{\'C}
+  \gdef^^c7{\cedilla C}
+  \gdef^^c8{\v C}
+  \gdef^^c9{\'E}
+  \gdef^^ca{\ogonek{E}}
+  \gdef^^cb{\"E}
+  \gdef^^cc{\v E}
+  \gdef^^cd{\'I}
+  \gdef^^ce{\^I}
+  \gdef^^cf{\v D}
+  %
+  \gdef^^d0{\DH}
+  \gdef^^d1{\'N}
+  \gdef^^d2{\v N}
+  \gdef^^d3{\'O}
+  \gdef^^d4{\^O}
+  \gdef^^d5{\H O}
+  \gdef^^d6{\"O}
+  \gdef^^d7{$\times$}
+  \gdef^^d8{\v R}
+  \gdef^^d9{\ringaccent U}
+  \gdef^^da{\'U}
+  \gdef^^db{\H U}
+  \gdef^^dc{\"U}
+  \gdef^^dd{\'Y}
+  \gdef^^de{\cedilla T}
+  \gdef^^df{\ss}
+  %
+  \gdef^^e0{\'r}
+  \gdef^^e1{\'a}
+  \gdef^^e2{\^a}
+  \gdef^^e3{\u a}
+  \gdef^^e4{\"a}
+  \gdef^^e5{\'l}
+  \gdef^^e6{\'c}
+  \gdef^^e7{\cedilla c}
+  \gdef^^e8{\v c}
+  \gdef^^e9{\'e}
+  \gdef^^ea{\ogonek{e}}
+  \gdef^^eb{\"e}
+  \gdef^^ec{\v e}
+  \gdef^^ed{\'{\dotless{i}}}
+  \gdef^^ee{\^{\dotless{i}}}
+  \gdef^^ef{\v d}
+  %
+  \gdef^^f0{\dh}
+  \gdef^^f1{\'n}
+  \gdef^^f2{\v n}
+  \gdef^^f3{\'o}
+  \gdef^^f4{\^o}
+  \gdef^^f5{\H o}
+  \gdef^^f6{\"o}
+  \gdef^^f7{$\div$}
+  \gdef^^f8{\v r}
+  \gdef^^f9{\ringaccent u}
+  \gdef^^fa{\'u}
+  \gdef^^fb{\H u}
+  \gdef^^fc{\"u}
+  \gdef^^fd{\'y}
+  \gdef^^fe{\cedilla t}
+  \gdef^^ff{\dotaccent{}}
+}
+
+% UTF-8 character definitions.
+%
+% This code to support UTF-8 is based on LaTeX's utf8.def, with some
+% changes for Texinfo conventions.  It is included here under the GPL by
+% permission from Frank Mittelbach and the LaTeX team.
+%
+\newcount\countUTFx
+\newcount\countUTFy
+\newcount\countUTFz
+
+\gdef\UTFviiiTwoOctets#1#2{\expandafter
+   \UTFviiiDefined\csname u8:#1\string #2\endcsname}
+%
+\gdef\UTFviiiThreeOctets#1#2#3{\expandafter
+   \UTFviiiDefined\csname u8:#1\string #2\string #3\endcsname}
+%
+\gdef\UTFviiiFourOctets#1#2#3#4{\expandafter
+   \UTFviiiDefined\csname u8:#1\string #2\string #3\string #4\endcsname}
+
+\gdef\UTFviiiDefined#1{%
+  \ifx #1\relax
+    \message{\linenumber Unicode char \string #1 not defined for Texinfo}%
+  \else
+    \expandafter #1%
+  \fi
+}
+
+\begingroup
+  \catcode`\~13
+  \catcode`\"12
+
+  \def\UTFviiiLoop{%
+    \global\catcode\countUTFx\active
+    \uccode`\~\countUTFx
+    \uppercase\expandafter{\UTFviiiTmp}%
+    \advance\countUTFx by 1
+    \ifnum\countUTFx < \countUTFy
+      \expandafter\UTFviiiLoop
+    \fi}
+
+  \countUTFx = "C2
+  \countUTFy = "E0
+  \def\UTFviiiTmp{%
+    \xdef~{\noexpand\UTFviiiTwoOctets\string~}}
+  \UTFviiiLoop
+
+  \countUTFx = "E0
+  \countUTFy = "F0
+  \def\UTFviiiTmp{%
+    \xdef~{\noexpand\UTFviiiThreeOctets\string~}}
+  \UTFviiiLoop
+
+  \countUTFx = "F0
+  \countUTFy = "F4
+  \def\UTFviiiTmp{%
+    \xdef~{\noexpand\UTFviiiFourOctets\string~}}
+  \UTFviiiLoop
+\endgroup
+
+\begingroup
+  \catcode`\"=12
+  \catcode`\<=12
+  \catcode`\.=12
+  \catcode`\,=12
+  \catcode`\;=12
+  \catcode`\!=12
+  \catcode`\~=13
+
+  \gdef\DeclareUnicodeCharacter#1#2{%
+    \countUTFz = "#1\relax
+    %\wlog{\space\space defining Unicode char U+#1 (decimal \the\countUTFz)}%
+    \begingroup
+      \parseXMLCharref
+      \def\UTFviiiTwoOctets##1##2{%
+        \csname u8:##1\string ##2\endcsname}%
+      \def\UTFviiiThreeOctets##1##2##3{%
+        \csname u8:##1\string ##2\string ##3\endcsname}%
+      \def\UTFviiiFourOctets##1##2##3##4{%
+        \csname u8:##1\string ##2\string ##3\string ##4\endcsname}%
+      \expandafter\expandafter\expandafter\expandafter
+       \expandafter\expandafter\expandafter
+       \gdef\UTFviiiTmp{#2}%
+    \endgroup}
+
+  \gdef\parseXMLCharref{%
+    \ifnum\countUTFz < "A0\relax
+      \errhelp = \EMsimple
+      \errmessage{Cannot define Unicode char value < 00A0}%
+    \else\ifnum\countUTFz < "800\relax
+      \parseUTFviiiA,%
+      \parseUTFviiiB C\UTFviiiTwoOctets.,%
+    \else\ifnum\countUTFz < "10000\relax
+      \parseUTFviiiA;%
+      \parseUTFviiiA,%
+      \parseUTFviiiB E\UTFviiiThreeOctets.{,;}%
+    \else
+      \parseUTFviiiA;%
+      \parseUTFviiiA,%
+      \parseUTFviiiA!%
+      \parseUTFviiiB F\UTFviiiFourOctets.{!,;}%
+    \fi\fi\fi
+  }
+
+  \gdef\parseUTFviiiA#1{%
+    \countUTFx = \countUTFz
+    \divide\countUTFz by 64
+    \countUTFy = \countUTFz
+    \multiply\countUTFz by 64
+    \advance\countUTFx by -\countUTFz
+    \advance\countUTFx by 128
+    \uccode `#1\countUTFx
+    \countUTFz = \countUTFy}
+
+  \gdef\parseUTFviiiB#1#2#3#4{%
+    \advance\countUTFz by "#10\relax
+    \uccode `#3\countUTFz
+    \uppercase{\gdef\UTFviiiTmp{#2#3#4}}}
+\endgroup
+
+\def\utfeightchardefs{%
+  \DeclareUnicodeCharacter{00A0}{\tie}
+  \DeclareUnicodeCharacter{00A1}{\exclamdown}
+  \DeclareUnicodeCharacter{00A3}{\pounds}
+  \DeclareUnicodeCharacter{00A8}{\"{ }}
+  \DeclareUnicodeCharacter{00A9}{\copyright}
+  \DeclareUnicodeCharacter{00AA}{\ordf}
+  \DeclareUnicodeCharacter{00AB}{\guillemetleft}
+  \DeclareUnicodeCharacter{00AD}{\-}
+  \DeclareUnicodeCharacter{00AE}{\registeredsymbol}
+  \DeclareUnicodeCharacter{00AF}{\={ }}
+
+  \DeclareUnicodeCharacter{00B0}{\ringaccent{ }}
+  \DeclareUnicodeCharacter{00B4}{\'{ }}
+  \DeclareUnicodeCharacter{00B8}{\cedilla{ }}
+  \DeclareUnicodeCharacter{00BA}{\ordm}
+  \DeclareUnicodeCharacter{00BB}{\guillemetright}
+  \DeclareUnicodeCharacter{00BF}{\questiondown}
+
+  \DeclareUnicodeCharacter{00C0}{\`A}
+  \DeclareUnicodeCharacter{00C1}{\'A}
+  \DeclareUnicodeCharacter{00C2}{\^A}
+  \DeclareUnicodeCharacter{00C3}{\~A}
+  \DeclareUnicodeCharacter{00C4}{\"A}
+  \DeclareUnicodeCharacter{00C5}{\AA}
+  \DeclareUnicodeCharacter{00C6}{\AE}
+  \DeclareUnicodeCharacter{00C7}{\cedilla{C}}
+  \DeclareUnicodeCharacter{00C8}{\`E}
+  \DeclareUnicodeCharacter{00C9}{\'E}
+  \DeclareUnicodeCharacter{00CA}{\^E}
+  \DeclareUnicodeCharacter{00CB}{\"E}
+  \DeclareUnicodeCharacter{00CC}{\`I}
+  \DeclareUnicodeCharacter{00CD}{\'I}
+  \DeclareUnicodeCharacter{00CE}{\^I}
+  \DeclareUnicodeCharacter{00CF}{\"I}
+
+  \DeclareUnicodeCharacter{00D0}{\DH}
+  \DeclareUnicodeCharacter{00D1}{\~N}
+  \DeclareUnicodeCharacter{00D2}{\`O}
+  \DeclareUnicodeCharacter{00D3}{\'O}
+  \DeclareUnicodeCharacter{00D4}{\^O}
+  \DeclareUnicodeCharacter{00D5}{\~O}
+  \DeclareUnicodeCharacter{00D6}{\"O}
+  \DeclareUnicodeCharacter{00D8}{\O}
+  \DeclareUnicodeCharacter{00D9}{\`U}
+  \DeclareUnicodeCharacter{00DA}{\'U}
+  \DeclareUnicodeCharacter{00DB}{\^U}
+  \DeclareUnicodeCharacter{00DC}{\"U}
+  \DeclareUnicodeCharacter{00DD}{\'Y}
+  \DeclareUnicodeCharacter{00DE}{\TH}
+  \DeclareUnicodeCharacter{00DF}{\ss}
+
+  \DeclareUnicodeCharacter{00E0}{\`a}
+  \DeclareUnicodeCharacter{00E1}{\'a}
+  \DeclareUnicodeCharacter{00E2}{\^a}
+  \DeclareUnicodeCharacter{00E3}{\~a}
+  \DeclareUnicodeCharacter{00E4}{\"a}
+  \DeclareUnicodeCharacter{00E5}{\aa}
+  \DeclareUnicodeCharacter{00E6}{\ae}
+  \DeclareUnicodeCharacter{00E7}{\cedilla{c}}
+  \DeclareUnicodeCharacter{00E8}{\`e}
+  \DeclareUnicodeCharacter{00E9}{\'e}
+  \DeclareUnicodeCharacter{00EA}{\^e}
+  \DeclareUnicodeCharacter{00EB}{\"e}
+  \DeclareUnicodeCharacter{00EC}{\`{\dotless{i}}}
+  \DeclareUnicodeCharacter{00ED}{\'{\dotless{i}}}
+  \DeclareUnicodeCharacter{00EE}{\^{\dotless{i}}}
+  \DeclareUnicodeCharacter{00EF}{\"{\dotless{i}}}
+
+  \DeclareUnicodeCharacter{00F0}{\dh}
+  \DeclareUnicodeCharacter{00F1}{\~n}
+  \DeclareUnicodeCharacter{00F2}{\`o}
+  \DeclareUnicodeCharacter{00F3}{\'o}
+  \DeclareUnicodeCharacter{00F4}{\^o}
+  \DeclareUnicodeCharacter{00F5}{\~o}
+  \DeclareUnicodeCharacter{00F6}{\"o}
+  \DeclareUnicodeCharacter{00F8}{\o}
+  \DeclareUnicodeCharacter{00F9}{\`u}
+  \DeclareUnicodeCharacter{00FA}{\'u}
+  \DeclareUnicodeCharacter{00FB}{\^u}
+  \DeclareUnicodeCharacter{00FC}{\"u}
+  \DeclareUnicodeCharacter{00FD}{\'y}
+  \DeclareUnicodeCharacter{00FE}{\th}
+  \DeclareUnicodeCharacter{00FF}{\"y}
+
+  \DeclareUnicodeCharacter{0100}{\=A}
+  \DeclareUnicodeCharacter{0101}{\=a}
+  \DeclareUnicodeCharacter{0102}{\u{A}}
+  \DeclareUnicodeCharacter{0103}{\u{a}}
+  \DeclareUnicodeCharacter{0104}{\ogonek{A}}
+  \DeclareUnicodeCharacter{0105}{\ogonek{a}}
+  \DeclareUnicodeCharacter{0106}{\'C}
+  \DeclareUnicodeCharacter{0107}{\'c}
+  \DeclareUnicodeCharacter{0108}{\^C}
+  \DeclareUnicodeCharacter{0109}{\^c}
+  \DeclareUnicodeCharacter{0118}{\ogonek{E}}
+  \DeclareUnicodeCharacter{0119}{\ogonek{e}}
+  \DeclareUnicodeCharacter{010A}{\dotaccent{C}}
+  \DeclareUnicodeCharacter{010B}{\dotaccent{c}}
+  \DeclareUnicodeCharacter{010C}{\v{C}}
+  \DeclareUnicodeCharacter{010D}{\v{c}}
+  \DeclareUnicodeCharacter{010E}{\v{D}}
+
+  \DeclareUnicodeCharacter{0112}{\=E}
+  \DeclareUnicodeCharacter{0113}{\=e}
+  \DeclareUnicodeCharacter{0114}{\u{E}}
+  \DeclareUnicodeCharacter{0115}{\u{e}}
+  \DeclareUnicodeCharacter{0116}{\dotaccent{E}}
+  \DeclareUnicodeCharacter{0117}{\dotaccent{e}}
+  \DeclareUnicodeCharacter{011A}{\v{E}}
+  \DeclareUnicodeCharacter{011B}{\v{e}}
+  \DeclareUnicodeCharacter{011C}{\^G}
+  \DeclareUnicodeCharacter{011D}{\^g}
+  \DeclareUnicodeCharacter{011E}{\u{G}}
+  \DeclareUnicodeCharacter{011F}{\u{g}}
+
+  \DeclareUnicodeCharacter{0120}{\dotaccent{G}}
+  \DeclareUnicodeCharacter{0121}{\dotaccent{g}}
+  \DeclareUnicodeCharacter{0124}{\^H}
+  \DeclareUnicodeCharacter{0125}{\^h}
+  \DeclareUnicodeCharacter{0128}{\~I}
+  \DeclareUnicodeCharacter{0129}{\~{\dotless{i}}}
+  \DeclareUnicodeCharacter{012A}{\=I}
+  \DeclareUnicodeCharacter{012B}{\={\dotless{i}}}
+  \DeclareUnicodeCharacter{012C}{\u{I}}
+  \DeclareUnicodeCharacter{012D}{\u{\dotless{i}}}
+
+  \DeclareUnicodeCharacter{0130}{\dotaccent{I}}
+  \DeclareUnicodeCharacter{0131}{\dotless{i}}
+  \DeclareUnicodeCharacter{0132}{IJ}
+  \DeclareUnicodeCharacter{0133}{ij}
+  \DeclareUnicodeCharacter{0134}{\^J}
+  \DeclareUnicodeCharacter{0135}{\^{\dotless{j}}}
+  \DeclareUnicodeCharacter{0139}{\'L}
+  \DeclareUnicodeCharacter{013A}{\'l}
+
+  \DeclareUnicodeCharacter{0141}{\L}
+  \DeclareUnicodeCharacter{0142}{\l}
+  \DeclareUnicodeCharacter{0143}{\'N}
+  \DeclareUnicodeCharacter{0144}{\'n}
+  \DeclareUnicodeCharacter{0147}{\v{N}}
+  \DeclareUnicodeCharacter{0148}{\v{n}}
+  \DeclareUnicodeCharacter{014C}{\=O}
+  \DeclareUnicodeCharacter{014D}{\=o}
+  \DeclareUnicodeCharacter{014E}{\u{O}}
+  \DeclareUnicodeCharacter{014F}{\u{o}}
+
+  \DeclareUnicodeCharacter{0150}{\H{O}}
+  \DeclareUnicodeCharacter{0151}{\H{o}}
+  \DeclareUnicodeCharacter{0152}{\OE}
+  \DeclareUnicodeCharacter{0153}{\oe}
+  \DeclareUnicodeCharacter{0154}{\'R}
+  \DeclareUnicodeCharacter{0155}{\'r}
+  \DeclareUnicodeCharacter{0158}{\v{R}}
+  \DeclareUnicodeCharacter{0159}{\v{r}}
+  \DeclareUnicodeCharacter{015A}{\'S}
+  \DeclareUnicodeCharacter{015B}{\'s}
+  \DeclareUnicodeCharacter{015C}{\^S}
+  \DeclareUnicodeCharacter{015D}{\^s}
+  \DeclareUnicodeCharacter{015E}{\cedilla{S}}
+  \DeclareUnicodeCharacter{015F}{\cedilla{s}}
+
+  \DeclareUnicodeCharacter{0160}{\v{S}}
+  \DeclareUnicodeCharacter{0161}{\v{s}}
+  \DeclareUnicodeCharacter{0162}{\cedilla{t}}
+  \DeclareUnicodeCharacter{0163}{\cedilla{T}}
+  \DeclareUnicodeCharacter{0164}{\v{T}}
+
+  \DeclareUnicodeCharacter{0168}{\~U}
+  \DeclareUnicodeCharacter{0169}{\~u}
+  \DeclareUnicodeCharacter{016A}{\=U}
+  \DeclareUnicodeCharacter{016B}{\=u}
+  \DeclareUnicodeCharacter{016C}{\u{U}}
+  \DeclareUnicodeCharacter{016D}{\u{u}}
+  \DeclareUnicodeCharacter{016E}{\ringaccent{U}}
+  \DeclareUnicodeCharacter{016F}{\ringaccent{u}}
+
+  \DeclareUnicodeCharacter{0170}{\H{U}}
+  \DeclareUnicodeCharacter{0171}{\H{u}}
+  \DeclareUnicodeCharacter{0174}{\^W}
+  \DeclareUnicodeCharacter{0175}{\^w}
+  \DeclareUnicodeCharacter{0176}{\^Y}
+  \DeclareUnicodeCharacter{0177}{\^y}
+  \DeclareUnicodeCharacter{0178}{\"Y}
+  \DeclareUnicodeCharacter{0179}{\'Z}
+  \DeclareUnicodeCharacter{017A}{\'z}
+  \DeclareUnicodeCharacter{017B}{\dotaccent{Z}}
+  \DeclareUnicodeCharacter{017C}{\dotaccent{z}}
+  \DeclareUnicodeCharacter{017D}{\v{Z}}
+  \DeclareUnicodeCharacter{017E}{\v{z}}
+
+  \DeclareUnicodeCharacter{01C4}{D\v{Z}}
+  \DeclareUnicodeCharacter{01C5}{D\v{z}}
+  \DeclareUnicodeCharacter{01C6}{d\v{z}}
+  \DeclareUnicodeCharacter{01C7}{LJ}
+  \DeclareUnicodeCharacter{01C8}{Lj}
+  \DeclareUnicodeCharacter{01C9}{lj}
+  \DeclareUnicodeCharacter{01CA}{NJ}
+  \DeclareUnicodeCharacter{01CB}{Nj}
+  \DeclareUnicodeCharacter{01CC}{nj}
+  \DeclareUnicodeCharacter{01CD}{\v{A}}
+  \DeclareUnicodeCharacter{01CE}{\v{a}}
+  \DeclareUnicodeCharacter{01CF}{\v{I}}
+
+  \DeclareUnicodeCharacter{01D0}{\v{\dotless{i}}}
+  \DeclareUnicodeCharacter{01D1}{\v{O}}
+  \DeclareUnicodeCharacter{01D2}{\v{o}}
+  \DeclareUnicodeCharacter{01D3}{\v{U}}
+  \DeclareUnicodeCharacter{01D4}{\v{u}}
+
+  \DeclareUnicodeCharacter{01E2}{\={\AE}}
+  \DeclareUnicodeCharacter{01E3}{\={\ae}}
+  \DeclareUnicodeCharacter{01E6}{\v{G}}
+  \DeclareUnicodeCharacter{01E7}{\v{g}}
+  \DeclareUnicodeCharacter{01E8}{\v{K}}
+  \DeclareUnicodeCharacter{01E9}{\v{k}}
+
+  \DeclareUnicodeCharacter{01F0}{\v{\dotless{j}}}
+  \DeclareUnicodeCharacter{01F1}{DZ}
+  \DeclareUnicodeCharacter{01F2}{Dz}
+  \DeclareUnicodeCharacter{01F3}{dz}
+  \DeclareUnicodeCharacter{01F4}{\'G}
+  \DeclareUnicodeCharacter{01F5}{\'g}
+  \DeclareUnicodeCharacter{01F8}{\`N}
+  \DeclareUnicodeCharacter{01F9}{\`n}
+  \DeclareUnicodeCharacter{01FC}{\'{\AE}}
+  \DeclareUnicodeCharacter{01FD}{\'{\ae}}
+  \DeclareUnicodeCharacter{01FE}{\'{\O}}
+  \DeclareUnicodeCharacter{01FF}{\'{\o}}
+
+  \DeclareUnicodeCharacter{021E}{\v{H}}
+  \DeclareUnicodeCharacter{021F}{\v{h}}
+
+  \DeclareUnicodeCharacter{0226}{\dotaccent{A}}
+  \DeclareUnicodeCharacter{0227}{\dotaccent{a}}
+  \DeclareUnicodeCharacter{0228}{\cedilla{E}}
+  \DeclareUnicodeCharacter{0229}{\cedilla{e}}
+  \DeclareUnicodeCharacter{022E}{\dotaccent{O}}
+  \DeclareUnicodeCharacter{022F}{\dotaccent{o}}
+
+  \DeclareUnicodeCharacter{0232}{\=Y}
+  \DeclareUnicodeCharacter{0233}{\=y}
+  \DeclareUnicodeCharacter{0237}{\dotless{j}}
+
+  \DeclareUnicodeCharacter{02DB}{\ogonek{ }}
+
+  \DeclareUnicodeCharacter{1E02}{\dotaccent{B}}
+  \DeclareUnicodeCharacter{1E03}{\dotaccent{b}}
+  \DeclareUnicodeCharacter{1E04}{\udotaccent{B}}
+  \DeclareUnicodeCharacter{1E05}{\udotaccent{b}}
+  \DeclareUnicodeCharacter{1E06}{\ubaraccent{B}}
+  \DeclareUnicodeCharacter{1E07}{\ubaraccent{b}}
+  \DeclareUnicodeCharacter{1E0A}{\dotaccent{D}}
+  \DeclareUnicodeCharacter{1E0B}{\dotaccent{d}}
+  \DeclareUnicodeCharacter{1E0C}{\udotaccent{D}}
+  \DeclareUnicodeCharacter{1E0D}{\udotaccent{d}}
+  \DeclareUnicodeCharacter{1E0E}{\ubaraccent{D}}
+  \DeclareUnicodeCharacter{1E0F}{\ubaraccent{d}}
+
+  \DeclareUnicodeCharacter{1E1E}{\dotaccent{F}}
+  \DeclareUnicodeCharacter{1E1F}{\dotaccent{f}}
+
+  \DeclareUnicodeCharacter{1E20}{\=G}
+  \DeclareUnicodeCharacter{1E21}{\=g}
+  \DeclareUnicodeCharacter{1E22}{\dotaccent{H}}
+  \DeclareUnicodeCharacter{1E23}{\dotaccent{h}}
+  \DeclareUnicodeCharacter{1E24}{\udotaccent{H}}
+  \DeclareUnicodeCharacter{1E25}{\udotaccent{h}}
+  \DeclareUnicodeCharacter{1E26}{\"H}
+  \DeclareUnicodeCharacter{1E27}{\"h}
+
+  \DeclareUnicodeCharacter{1E30}{\'K}
+  \DeclareUnicodeCharacter{1E31}{\'k}
+  \DeclareUnicodeCharacter{1E32}{\udotaccent{K}}
+  \DeclareUnicodeCharacter{1E33}{\udotaccent{k}}
+  \DeclareUnicodeCharacter{1E34}{\ubaraccent{K}}
+  \DeclareUnicodeCharacter{1E35}{\ubaraccent{k}}
+  \DeclareUnicodeCharacter{1E36}{\udotaccent{L}}
+  \DeclareUnicodeCharacter{1E37}{\udotaccent{l}}
+  \DeclareUnicodeCharacter{1E3A}{\ubaraccent{L}}
+  \DeclareUnicodeCharacter{1E3B}{\ubaraccent{l}}
+  \DeclareUnicodeCharacter{1E3E}{\'M}
+  \DeclareUnicodeCharacter{1E3F}{\'m}
+
+  \DeclareUnicodeCharacter{1E40}{\dotaccent{M}}
+  \DeclareUnicodeCharacter{1E41}{\dotaccent{m}}
+  \DeclareUnicodeCharacter{1E42}{\udotaccent{M}}
+  \DeclareUnicodeCharacter{1E43}{\udotaccent{m}}
+  \DeclareUnicodeCharacter{1E44}{\dotaccent{N}}
+  \DeclareUnicodeCharacter{1E45}{\dotaccent{n}}
+  \DeclareUnicodeCharacter{1E46}{\udotaccent{N}}
+  \DeclareUnicodeCharacter{1E47}{\udotaccent{n}}
+  \DeclareUnicodeCharacter{1E48}{\ubaraccent{N}}
+  \DeclareUnicodeCharacter{1E49}{\ubaraccent{n}}
+
+  \DeclareUnicodeCharacter{1E54}{\'P}
+  \DeclareUnicodeCharacter{1E55}{\'p}
+  \DeclareUnicodeCharacter{1E56}{\dotaccent{P}}
+  \DeclareUnicodeCharacter{1E57}{\dotaccent{p}}
+  \DeclareUnicodeCharacter{1E58}{\dotaccent{R}}
+  \DeclareUnicodeCharacter{1E59}{\dotaccent{r}}
+  \DeclareUnicodeCharacter{1E5A}{\udotaccent{R}}
+  \DeclareUnicodeCharacter{1E5B}{\udotaccent{r}}
+  \DeclareUnicodeCharacter{1E5E}{\ubaraccent{R}}
+  \DeclareUnicodeCharacter{1E5F}{\ubaraccent{r}}
+
+  \DeclareUnicodeCharacter{1E60}{\dotaccent{S}}
+  \DeclareUnicodeCharacter{1E61}{\dotaccent{s}}
+  \DeclareUnicodeCharacter{1E62}{\udotaccent{S}}
+  \DeclareUnicodeCharacter{1E63}{\udotaccent{s}}
+  \DeclareUnicodeCharacter{1E6A}{\dotaccent{T}}
+  \DeclareUnicodeCharacter{1E6B}{\dotaccent{t}}
+  \DeclareUnicodeCharacter{1E6C}{\udotaccent{T}}
+  \DeclareUnicodeCharacter{1E6D}{\udotaccent{t}}
+  \DeclareUnicodeCharacter{1E6E}{\ubaraccent{T}}
+  \DeclareUnicodeCharacter{1E6F}{\ubaraccent{t}}
+
+  \DeclareUnicodeCharacter{1E7C}{\~V}
+  \DeclareUnicodeCharacter{1E7D}{\~v}
+  \DeclareUnicodeCharacter{1E7E}{\udotaccent{V}}
+  \DeclareUnicodeCharacter{1E7F}{\udotaccent{v}}
+
+  \DeclareUnicodeCharacter{1E80}{\`W}
+  \DeclareUnicodeCharacter{1E81}{\`w}
+  \DeclareUnicodeCharacter{1E82}{\'W}
+  \DeclareUnicodeCharacter{1E83}{\'w}
+  \DeclareUnicodeCharacter{1E84}{\"W}
+  \DeclareUnicodeCharacter{1E85}{\"w}
+  \DeclareUnicodeCharacter{1E86}{\dotaccent{W}}
+  \DeclareUnicodeCharacter{1E87}{\dotaccent{w}}
+  \DeclareUnicodeCharacter{1E88}{\udotaccent{W}}
+  \DeclareUnicodeCharacter{1E89}{\udotaccent{w}}
+  \DeclareUnicodeCharacter{1E8A}{\dotaccent{X}}
+  \DeclareUnicodeCharacter{1E8B}{\dotaccent{x}}
+  \DeclareUnicodeCharacter{1E8C}{\"X}
+  \DeclareUnicodeCharacter{1E8D}{\"x}
+  \DeclareUnicodeCharacter{1E8E}{\dotaccent{Y}}
+  \DeclareUnicodeCharacter{1E8F}{\dotaccent{y}}
+
+  \DeclareUnicodeCharacter{1E90}{\^Z}
+  \DeclareUnicodeCharacter{1E91}{\^z}
+  \DeclareUnicodeCharacter{1E92}{\udotaccent{Z}}
+  \DeclareUnicodeCharacter{1E93}{\udotaccent{z}}
+  \DeclareUnicodeCharacter{1E94}{\ubaraccent{Z}}
+  \DeclareUnicodeCharacter{1E95}{\ubaraccent{z}}
+  \DeclareUnicodeCharacter{1E96}{\ubaraccent{h}}
+  \DeclareUnicodeCharacter{1E97}{\"t}
+  \DeclareUnicodeCharacter{1E98}{\ringaccent{w}}
+  \DeclareUnicodeCharacter{1E99}{\ringaccent{y}}
+
+  \DeclareUnicodeCharacter{1EA0}{\udotaccent{A}}
+  \DeclareUnicodeCharacter{1EA1}{\udotaccent{a}}
+
+  \DeclareUnicodeCharacter{1EB8}{\udotaccent{E}}
+  \DeclareUnicodeCharacter{1EB9}{\udotaccent{e}}
+  \DeclareUnicodeCharacter{1EBC}{\~E}
+  \DeclareUnicodeCharacter{1EBD}{\~e}
+
+  \DeclareUnicodeCharacter{1ECA}{\udotaccent{I}}
+  \DeclareUnicodeCharacter{1ECB}{\udotaccent{i}}
+  \DeclareUnicodeCharacter{1ECC}{\udotaccent{O}}
+  \DeclareUnicodeCharacter{1ECD}{\udotaccent{o}}
+
+  \DeclareUnicodeCharacter{1EE4}{\udotaccent{U}}
+  \DeclareUnicodeCharacter{1EE5}{\udotaccent{u}}
+
+  \DeclareUnicodeCharacter{1EF2}{\`Y}
+  \DeclareUnicodeCharacter{1EF3}{\`y}
+  \DeclareUnicodeCharacter{1EF4}{\udotaccent{Y}}
+
+  \DeclareUnicodeCharacter{1EF8}{\~Y}
+  \DeclareUnicodeCharacter{1EF9}{\~y}
+
+  \DeclareUnicodeCharacter{2013}{--}
+  \DeclareUnicodeCharacter{2014}{---}
+  \DeclareUnicodeCharacter{2018}{\quoteleft}
+  \DeclareUnicodeCharacter{2019}{\quoteright}
+  \DeclareUnicodeCharacter{201A}{\quotesinglbase}
+  \DeclareUnicodeCharacter{201C}{\quotedblleft}
+  \DeclareUnicodeCharacter{201D}{\quotedblright}
+  \DeclareUnicodeCharacter{201E}{\quotedblbase}
+  \DeclareUnicodeCharacter{2022}{\bullet}
+  \DeclareUnicodeCharacter{2026}{\dots}
+  \DeclareUnicodeCharacter{2039}{\guilsinglleft}
+  \DeclareUnicodeCharacter{203A}{\guilsinglright}
+  \DeclareUnicodeCharacter{20AC}{\euro}
+
+  \DeclareUnicodeCharacter{2192}{\expansion}
+  \DeclareUnicodeCharacter{21D2}{\result}
+
+  \DeclareUnicodeCharacter{2212}{\minus}
+  \DeclareUnicodeCharacter{2217}{\point}
+  \DeclareUnicodeCharacter{2261}{\equiv}
+}% end of \utfeightchardefs
+
+
+% US-ASCII character definitions.
+\def\asciichardefs{% nothing need be done
+   \relax
+}
+
+% Make non-ASCII characters printable again for compatibility with
+% existing Texinfo documents that may use them, even without declaring a
+% document encoding.
+%
+\setnonasciicharscatcode \other
+
+
+\message{formatting,}
+
 \newdimen\defaultparindent \defaultparindent = 15pt
 
 \chapheadingskip = 15pt plus 4pt minus 2pt
@@ -6837,10 +9609,10 @@
 % Prevent underfull vbox error messages.
 \vbadness = 10000
 
-% Don't be so finicky about underfull hboxes, either.
-\hbadness = 2000
+% Don't be very finicky about underfull hboxes, either.
+\hbadness = 6666
 
-% Following George Bush, just get rid of widows and orphans.
+% Following George Bush, get rid of widows and orphans.
 \widowpenalty=10000
 \clubpenalty=10000
 
@@ -6887,6 +9659,10 @@
   \ifpdf
     \pdfpageheight #7\relax
     \pdfpagewidth #8\relax
+    % if we don't reset these, they will remain at "1 true in" of
+    % whatever layout pdftex was dumped with.
+    \pdfhorigin = 1 true in
+    \pdfvorigin = 1 true in
   \fi
   %
   \setleading{\textleading}
@@ -6901,7 +9677,7 @@
   \textleading = 13.2pt
   %
   % If page is nothing but text, make it come out even.
-  \internalpagesizes{46\baselineskip}{6in}%
+  \internalpagesizes{607.2pt}{6in}% that's 46 lines
                     {\voffset}{.25in}%
                     {\bindingoffset}{36pt}%
                     {11in}{8.5in}%
@@ -6913,7 +9689,7 @@
   \textleading = 12pt
   %
   \internalpagesizes{7.5in}{5in}%
-                    {\voffset}{.25in}%
+                    {-.2in}{0in}%
                     {\bindingoffset}{16pt}%
                     {9.25in}{7in}%
   %
@@ -6957,7 +9733,7 @@
   % \global\normaloffset = -6mm
   % \global\bindingoffset = 10mm
   % @end tex
-  \internalpagesizes{51\baselineskip}{160mm}
+  \internalpagesizes{673.2pt}{160mm}% that's 51 lines
                     {\voffset}{\hoffset}%
                     {\bindingoffset}{44pt}%
                     {297mm}{210mm}%
@@ -7022,7 +9798,7 @@
   \parskip = 3pt plus 2pt minus 1pt
   \setleading{\textleading}%
   %
-  \dimen0 = #1
+  \dimen0 = #1\relax
   \advance\dimen0 by \voffset
   %
   \dimen2 = \hsize
@@ -7041,25 +9817,21 @@
 
 \message{and turning on texinfo input format.}
 
+\def^^L{\par} % remove \outer, so ^L can appear in an @comment
+
+% DEL is a comment character, in case @c does not suffice.
+\catcode`\^^? = 14
+
 % Define macros to output various characters with catcode for normal text.
-\catcode`\"=\other
-\catcode`\~=\other
-\catcode`\^=\other
-\catcode`\_=\other
-\catcode`\|=\other
-\catcode`\<=\other
-\catcode`\>=\other
-\catcode`\+=\other
-\catcode`\$=\other
-\def\normaldoublequote{"}
-\def\normaltilde{~}
-\def\normalcaret{^}
-\def\normalunderscore{_}
-\def\normalverticalbar{|}
-\def\normalless{<}
-\def\normalgreater{>}
-\def\normalplus{+}
-\def\normaldollar{$}%$ font-lock fix
+\catcode`\"=\other \def\normaldoublequote{"}
+\catcode`\$=\other \def\normaldollar{$}%$ font-lock fix
+\catcode`\+=\other \def\normalplus{+}
+\catcode`\<=\other \def\normalless{<}
+\catcode`\>=\other \def\normalgreater{>}
+\catcode`\^=\other \def\normalcaret{^}
+\catcode`\_=\other \def\normalunderscore{_}
+\catcode`\|=\other \def\normalverticalbar{|}
+\catcode`\~=\other \def\normaltilde{~}
 
 % This macro is used to make a character print one way in \tt
 % (where it can probably be output as-is), and another way in other fonts,
@@ -7117,6 +9889,13 @@
 % \otherifyactive is called near the end of this file.
 \def\otherifyactive{\catcode`+=\other \catcode`\_=\other}
 
+% Used sometimes to turn off (effectively) the active characters even after
+% parsing them.
+\def\turnoffactive{%
+  \normalturnoffactive
+  \otherbackslash
+}
+
 \catcode`\@=0
 
 % \backslashcurfont outputs one backslash character in current font,
@@ -7124,45 +9903,52 @@
 \global\chardef\backslashcurfont=`\\
 \global\let\rawbackslashxx=\backslashcurfont  % let existing .??s files work
 
-% \rawbackslash defines an active \ to do \backslashcurfont.
-% \otherbackslash defines an active \ to be a literal `\' character with
-% catcode other.
-{\catcode`\\=\active
- @gdef@rawbackslash{@let\=@backslashcurfont}
- @gdef@otherbackslash{@let\=@realbackslash}
-}
-
 % \realbackslash is an actual character `\' with catcode other, and
 % \doublebackslash is two of them (for the pdf outlines).
 {\catcode`\\=\other @gdef@realbackslash{\} @gdef@doublebackslash{\\}}
 
-% \normalbackslash outputs one backslash in fixed width font.
-\def\normalbackslash{{\tt\backslashcurfont}}
+% In texinfo, backslash is an active character; it prints the backslash
+% in fixed width font.
+\catcode`\\=\active  % @ for escape char from now on.
 
-\catcode`\\=\active
+% The story here is that in math mode, the \char of \backslashcurfont
+% ends up printing the roman \ from the math symbol font (because \char
+% in math mode uses the \mathcode, and plain.tex sets
+% \mathcode`\\="026E).  It seems better for @backslashchar{} to always
+% print a typewriter backslash, hence we use an explicit \mathchar,
+% which is the decimal equivalent of "715c (class 7, e.g., use \fam;
+% ignored family value; char position "5C).  We can't use " for the
+% usual hex value because it has already been made active.
+@def@normalbackslash{{@tt @ifmmode @mathchar29020 @else @backslashcurfont @fi}}
+@let@backslashchar = @normalbackslash % @backslashchar{} is for user documents.
 
-% Used sometimes to turn off (effectively) the active characters
-% even after parsing them.
-@def@turnoffactive{%
+% On startup, @fixbackslash assigns:
+%  @let \ = @normalbackslash
+% \rawbackslash defines an active \ to do \backslashcurfont.
+% \otherbackslash defines an active \ to be a literal `\' character with
+% catcode other.  We switch back and forth between these.
+@gdef@rawbackslash{@let\=@backslashcurfont}
+@gdef@otherbackslash{@let\=@realbackslash}
+
+% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
+% the literal character `\'.
+%
+@def@normalturnoffactive{%
   @let"=@normaldoublequote
-  @let\=@realbackslash
-  @let~=@normaltilde
+  @let$=@normaldollar %$ font-lock fix
+  @let+=@normalplus
+  @let<=@normalless
+  @let>=@normalgreater
+  @let\=@normalbackslash
   @let^=@normalcaret
   @let_=@normalunderscore
   @let|=@normalverticalbar
-  @let<=@normalless
-  @let>=@normalgreater
-  @let+=@normalplus
-  @let$=@normaldollar %$ font-lock fix
+  @let~=@normaltilde
+  @markupsetuplqdefault
+  @markupsetuprqdefault
   @unsepspaces
 }
 
-% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
-% the literal character `\'.  (Thus, \ is not expandable when this is in
-% effect.)
-%
-@def@normalturnoffactive{@turnoffactive @let\=@normalbackslash}
-
 % Make _ and + \other characters, temporarily.
 % This is canceled by @fixbackslash.
 @otherifyactive
@@ -7175,7 +9961,7 @@
 @global@let\ = @eatinput
 
 % On the other hand, perhaps the file did not have a `\input texinfo'. Then
-% the first `\{ in the file would cause an error. This macro tries to fix
+% the first `\' in the file would cause an error. This macro tries to fix
 % that, assuming it is called before the first `\' could plausibly occur.
 % Also turn back on active characters that might appear in the input
 % file name, in case not using a pre-dumped format.
@@ -7189,11 +9975,28 @@
 % Say @foo, not \foo, in error messages.
 @escapechar = `@@
 
-% These look ok in all fonts, so just make them not special.
-@catcode`@& = @other
-@catcode`@# = @other
-@catcode`@% = @other
+% These (along with & and #) are made active for url-breaking, so need
+% active definitions as the normal characters.
+@def@normaldot{.}
+@def@normalquest{?}
+@def@normalslash{/}
 
+% These look ok in all fonts, so just make them not special.
+% @hashchar{} gets its own user-level command, because of #line.
+@catcode`@& = @other @def@normalamp{&}
+@catcode`@# = @other @def@normalhash{#}
+@catcode`@% = @other @def@normalpercent{%}
+
+@let @hashchar = @normalhash
+
+@c Finally, make ` and ' active, so that txicodequoteundirected and
+@c txicodequotebacktick work right in, e.g., @w{@code{`foo'}}.  If we
+@c don't make ` and ' active, @code will not get them as active chars.
+@c Do this last of all since we use ` in the previous @catcode assignments.
+@catcode`@'=@active
+@catcode`@`=@active
+@markupsetuplqdefault
+@markupsetuprqdefault
 
 @c Local variables:
 @c eval: (add-hook 'write-file-hooks 'time-stamp)