diff --git a/Lib/bdb.py b/Lib/bdb.py
index aa6779d..d0fcff8 100644
--- a/Lib/bdb.py
+++ b/Lib/bdb.py
@@ -109,6 +109,8 @@
                self.is_skipped_module(frame.f_globals.get('__name__')):
             return False
         if frame is self.stopframe:
+            if self.stoplineno == -1:
+                return False
             return frame.f_lineno >= self.stoplineno
         while frame is not None and frame is not self.stopframe:
             if frame is self.botframe:
@@ -166,10 +168,12 @@
         but only if we are to stop at or just below this level."""
         pass
 
-    def _set_stopinfo(self, stopframe, returnframe, stoplineno=-1):
+    def _set_stopinfo(self, stopframe, returnframe, stoplineno=0):
         self.stopframe = stopframe
         self.returnframe = returnframe
         self.quitting = 0
+        # stoplineno >= 0 means: stop at line >= the stoplineno
+        # stoplineno -1 means: don't stop at all
         self.stoplineno = stoplineno
 
     # Derived classes and clients can call the following methods
@@ -182,7 +186,7 @@
 
     def set_step(self):
         """Stop after one line of code."""
-        self._set_stopinfo(None,None)
+        self._set_stopinfo(None, None)
 
     def set_next(self, frame):
         """Stop on the next line in or below the given frame."""
@@ -209,7 +213,7 @@
 
     def set_continue(self):
         # Don't stop except at breakpoints or when finished
-        self._set_stopinfo(self.botframe, None)
+        self._set_stopinfo(self.botframe, None, -1)
         if not self.breaks:
             # no breakpoints; run without debugger overhead
             sys.settrace(None)
diff --git a/Lib/doctest.py b/Lib/doctest.py
index 917684c..8bca63d 100644
--- a/Lib/doctest.py
+++ b/Lib/doctest.py
@@ -335,6 +335,8 @@
         self.__out = out
         self.__debugger_used = False
         pdb.Pdb.__init__(self, stdout=out)
+        # still use input() to get user input
+        self.use_rawinput = 1
 
     def set_trace(self, frame=None):
         self.__debugger_used = True
@@ -1381,12 +1383,17 @@
         self.save_linecache_getlines = linecache.getlines
         linecache.getlines = self.__patched_linecache_getlines
 
+        # Make sure sys.displayhook just prints the value to stdout
+        save_displayhook = sys.displayhook
+        sys.displayhook = sys.__displayhook__
+
         try:
             return self.__run(test, compileflags, out)
         finally:
             sys.stdout = save_stdout
             pdb.set_trace = save_set_trace
             linecache.getlines = self.save_linecache_getlines
+            sys.displayhook = save_displayhook
             if clear_globs:
                 test.globs.clear()
 
diff --git a/Lib/pdb.py b/Lib/pdb.py
index 0751c17..a6109d4 100755
--- a/Lib/pdb.py
+++ b/Lib/pdb.py
@@ -183,14 +183,18 @@
 
     def user_return(self, frame, return_value):
         """This function is called when a return trap is set here."""
+        if self._wait_for_mainpyfile:
+            return
         frame.f_locals['__return__'] = return_value
         print >>self.stdout, '--Return--'
         self.interaction(frame, None)
 
     def user_exception(self, frame, exc_info):
-        exc_type, exc_value, exc_traceback = exc_info
         """This function is called if an exception occurs,
         but only if we are to stop at or just below this level."""
+        if self._wait_for_mainpyfile:
+            return
+        exc_type, exc_value, exc_traceback = exc_info
         frame.f_locals['__exception__'] = exc_type, exc_value
         if type(exc_type) == type(''):
             exc_type_name = exc_type
@@ -277,8 +281,10 @@
             return self.handle_command_def(line)
 
     def handle_command_def(self,line):
-        """ Handles one command line during command list definition. """
+        """Handles one command line during command list definition."""
         cmd, arg, line = self.parseline(line)
+        if not cmd:
+            return
         if cmd == 'silent':
             self.commands_silent[self.commands_bnum] = True
             return # continue to handle other cmd def in the cmd list
@@ -286,7 +292,7 @@
             self.cmdqueue = []
             return 1 # end of cmd list
         cmdlist = self.commands[self.commands_bnum]
-        if (arg):
+        if arg:
             cmdlist.append(cmd+' '+arg)
         else:
             cmdlist.append(cmd)
@@ -329,9 +335,11 @@
         prompt_back = self.prompt
         self.prompt = '(com) '
         self.commands_defining = True
-        self.cmdloop()
-        self.commands_defining = False
-        self.prompt = prompt_back
+        try:
+            self.cmdloop()
+        finally:
+            self.commands_defining = False
+            self.prompt = prompt_back
 
     def do_break(self, arg, temporary = 0):
         # break [ ([filename:]lineno | function) [, "condition"] ]
@@ -467,7 +475,10 @@
         Return `lineno` if it is, 0 if not (e.g. a docstring, comment, blank
         line or EOF). Warning: testing is not comprehensive.
         """
-        line = linecache.getline(filename, lineno, self.curframe.f_globals)
+        # this method should be callable before starting debugging, so default
+        # to "no globals" if there is no current frame
+        globs = self.curframe.f_globals if hasattr(self, 'curframe') else None
+        line = linecache.getline(filename, lineno, globs)
         if not line:
             print >>self.stdout, 'End of file'
             return 0
@@ -1298,7 +1309,7 @@
     # changed by the user from the command line. There is a "restart" command
     # which allows explicit specification of command line arguments.
     pdb = Pdb()
-    while 1:
+    while True:
         try:
             pdb._runscript(mainpyfile)
             if pdb._user_requested_quit:
diff --git a/Lib/test/test_doctest.py b/Lib/test/test_doctest.py
index e51bacc..b30bcab 100644
--- a/Lib/test/test_doctest.py
+++ b/Lib/test/test_doctest.py
@@ -981,6 +981,35 @@
         ZeroDivisionError: integer division or modulo by zero
     TestResults(failed=1, attempted=1)
 """
+    def displayhook(): r"""
+Test that changing sys.displayhook doesn't matter for doctest.
+
+    >>> import sys
+    >>> orig_displayhook = sys.displayhook
+    >>> def my_displayhook(x):
+    ...     print('hi!')
+    >>> sys.displayhook = my_displayhook
+    >>> def f():
+    ...     '''
+    ...     >>> 3
+    ...     3
+    ...     '''
+    >>> test = doctest.DocTestFinder().find(f)[0]
+    >>> r = doctest.DocTestRunner(verbose=False).run(test)
+    >>> post_displayhook = sys.displayhook
+
+    We need to restore sys.displayhook now, so that we'll be able to test
+    results.
+
+    >>> sys.displayhook = orig_displayhook
+
+    Ok, now we can check that everything is ok.
+
+    >>> r
+    TestResults(failed=0, attempted=1)
+    >>> post_displayhook is my_displayhook
+    True
+"""
     def optionflags(): r"""
 Tests of `DocTestRunner`'s option flag handling.
 
diff --git a/Lib/test/test_pdb.py b/Lib/test/test_pdb.py
index ce64d17..8aca812 100644
--- a/Lib/test/test_pdb.py
+++ b/Lib/test/test_pdb.py
@@ -126,6 +126,48 @@
     """
 
 
+def test_pdb_continue_in_bottomframe():
+    """Test that "continue" and "next" work properly in bottom frame (issue #5294).
+
+    >>> def test_function():
+    ...     import pdb, sys; inst = pdb.Pdb()
+    ...     inst.set_trace()
+    ...     inst.botframe = sys._getframe()  # hackery to get the right botframe
+    ...     print(1)
+    ...     print(2)
+    ...     print(3)
+    ...     print(4)
+
+    >>> with PdbTestInput([
+    ...     'next',
+    ...     'break 7',
+    ...     'continue',
+    ...     'next',
+    ...     'continue',
+    ...     'continue',
+    ... ]):
+    ...    test_function()
+    > <doctest test.test_pdb.test_pdb_continue_in_bottomframe[0]>(4)test_function()
+    -> inst.botframe = sys._getframe()  # hackery to get the right botframe
+    (Pdb) next
+    > <doctest test.test_pdb.test_pdb_continue_in_bottomframe[0]>(5)test_function()
+    -> print(1)
+    (Pdb) break 7
+    Breakpoint 1 at <doctest test.test_pdb.test_pdb_continue_in_bottomframe[0]>:7
+    (Pdb) continue
+    1
+    2
+    > <doctest test.test_pdb.test_pdb_continue_in_bottomframe[0]>(7)test_function()
+    -> print(3)
+    (Pdb) next
+    3
+    > <doctest test.test_pdb.test_pdb_continue_in_bottomframe[0]>(8)test_function()
+    -> print(4)
+    (Pdb) continue
+    4
+    """
+
+
 def test_main():
     from test import test_pdb
     test_support.run_doctest(test_pdb, verbosity=True)