Use the real name of the module: "smtplib", not "smtp".

Use logical (& consistent) markup.

Added a see-also section at the end.
diff --git a/Doc/lib/libsmtplib.tex b/Doc/lib/libsmtplib.tex
index 90bbc1e..9d42ee1 100644
--- a/Doc/lib/libsmtplib.tex
+++ b/Doc/lib/libsmtplib.tex
@@ -1,52 +1,56 @@
 % Documentation by ESR
-\section{Standard Module \module{smtp}}
-\stmodindex{smtp}
-\label{module-smtp}
+\section{Standard Module \module{smtplib}}
+\stmodindex{smtplib}
+\label{module-smtplib}
 
-The \code{smtp} module defines an SMTP session object that can be used
-to send mail to any Internet machine with an SMTP or ESMTP listener daemon.
-For details of SMTP and ESMTP operation, consult RFC 821 (Simple Mail
-Transfer Protocol) and RFC1869 (SMTP Service Extensions).
+The \module{smtplib} module defines an SMTP session object that can be
+used to send mail to any Internet machine with an SMTP or ESMTP
+listener daemon.  For details of SMTP and ESMTP operation, consult
+\rfc{821} (\emph{Simple Mail Transfer Protocol}) and \rfc{1869}
+(\emph{SMTP Service Extensions}).
 
 \begin{classdesc}{SMTP}{\optional{host, port}}
 A \class{SMTP} instance encapsulates an SMTP connection.  It has
 methods that support a full repertoire of SMTP and ESMTP
 operations. If the optional host and port parameters are given, the
-SMTP connect method is called with those parameters during
+SMTP \method{connect()} method is called with those parameters during
 initialization.
 
 For normal use, you should only require the initialization/connect,
-\var{sendmail}, and \var{quit} methods  An example is included below.
+\method{sendmail()}, and \method{quit()} methods  An example is
+included below.
 \end{classdesc}
 
 \subsection{SMTP Objects}
 \label{SMTP-objects}
 
-A \class{SMTP} instance has the following methods:
+An \class{SMTP} instance has the following methods:
 
 \begin{methoddesc}{set_debuglevel}{level}
-Set the debug output level.  A non-false value results in debug
-messages for connection and for all messages sent to and received from
-the server.
+Set the debug output level.  A true value for \var{level} results in
+debug messages for connection and for all messages sent to and
+received from the server.
 \end{methoddesc}
 
-\begin{methoddesc}{connect}{\optional{host='localhost',port=0}}
+\begin{methoddesc}{connect}{\optional{host='localhost'\optional{, port=0}}}
 Connect to a host on a given port.
 
-If the hostname ends with a colon (`:') followed by a number,
-that suffix will be stripped off and the number interpreted as
+If the hostname ends with a colon (\character{:}) followed by a
+number, that suffix will be stripped off and the number interpreted as 
 the port number to use.
 
-Note:  This method is automatically invoked by __init__,
-if a host is specified during instantiation.
+Note:  This method is automatically invoked by the constructor if a
+host is specified during instantiation.
 \end{methoddesc}
 
 \begin{methoddesc}{docmd}{cmd, \optional{, argstring}}
-Send a command to the server.  The optional argument
-string is simply concatenated to the command.
+Send a command \var{cmd} to the server.  The optional argument
+\var{argstring} is simply concatenated to the command, separated by a
+space.
 
-Get back a 2-tuple composed of a numeric response code and the actual
-response line (multiline responses are joined into one long line.)
+This returns a 2-tuple composed of a numeric response code and the
+actual response line (multiline responses are joined into one long
+line.)
 
 In normal operation it should not be necessary to call this method
 explicitly.  It is used to implement other methods and may be useful
@@ -58,29 +62,29 @@
 argument defaults to the FQDN of the local host.
 
 In normal operation it should not be necessary to call this method
-explicitly.  It will be implicitly called by the \var{sendmail} method
+explicitly.  It will be implicitly called by the \method{sendmail()}
 when necessary.
 \end{methoddesc}
 
 \begin{methoddesc}{ehlo}{\optional{hostname}}
 Identify yourself to an ESMTP server using HELO.  The hostname
 argument defaults to the FQDN of the local host.  Examine the 
-response for ESMTP option and store them for use by the
-\var{has_option} method.
+response for ESMTP option and store them for use by
+\method{has_option()}.
 
-Unless you wish to use the \var{has_option} method before sending
+Unless you wish to use \method{has_option()} before sending
 mail, it should not be necessary to call this method explicitly.  It
-will be implicitly called by the \var{sendmail} method when necessary.
+will be implicitly called by \method{sendmail()} when necessary.
 \end{methoddesc}
 
 \begin{methoddesc}{has_option}{name}
-Return 1 if name is in the set of ESMTP options returned by the
-server, 0 otherwise.  Case is ignored.
+Return \code{1} if \var{name} is in the set of ESMTP options returned
+by the server, \code{0} otherwise.  Case is ignored.
 \end{methoddesc}
 
 \begin{methoddesc}{verify}{address}
 Check the validity of an address on this server using SMTP VRFY.
-Returns a tuple consisting of code 250 and a full RFC822 address
+Returns a tuple consisting of code 250 and a full \rfc{822} address
 (including human name) if the user address is valid. Otherwise returns
 an SMTP error code of 400 or greater and an error string.
 
@@ -88,8 +92,8 @@
 \end{methoddesc}
 
 \begin{methoddesc}{sendmail}{from_addr, to_addrs, msg\optional{, options=[]}}
-Send mail.  The required arguments are an RFC822 from-address string,
-a list of RFC822 to-address strings, and a message string.  The caller
+Send mail.  The required arguments are an \rfc{822} from-address string,
+a list of \rfc{822} to-address strings, and a message string.  The caller
 may pass a list of ESMTP options to be used in MAIL FROM commands.
 
 If there has been no previous EHLO or HELO command this session, this
@@ -100,11 +104,12 @@
 
 This method will return normally if the mail is accepted for at least 
 one recipient. Otherwise it will throw an exception (either
-SMTPSenderRefused, SMTPRecipientsRefused, or SMTPDataError)
+\exception{SMTPSenderRefused}, \exception{SMTPRecipientsRefused}, or
+\exception{SMTPDataError}).
 That is, if this method does not throw an exception, then someone 
 should get your mail.  If this method does not throw an exception,
 it returns a dictionary, with one entry for each recipient that was 
-refused. 
+refused.
 \end{methoddesc}
 
 \begin{methoddesc}{quit}{}
@@ -116,29 +121,41 @@
 these do not need to be called directly, so they are not documented
 here. For details, consult the module code.
 
-Example:
+
+\subsection{SMTP Example}
+\label{SMTP-example}
+
+% really need a little description here...
 
 \begin{verbatim}
-    import sys, rfc822
+import sys, rfc822
 
-    def prompt(prompt):
-        sys.stdout.write(prompt + ": ")
-        return string.strip(sys.stdin.readline())
+def prompt(prompt):
+    sys.stdout.write(prompt + ": ")
+    return string.strip(sys.stdin.readline())
 
-    fromaddr = prompt("From")
-    toaddrs  = string.splitfields(prompt("To"), ',')
-    print "Enter message, end with ^D:"
-    msg = ''
-    while 1:
-        line = sys.stdin.readline()
-        if not line:
-            break
-        msg = msg + line
-    print "Message length is " + `len(msg)`
+fromaddr = prompt("From")
+toaddrs  = string.splitfields(prompt("To"), ',')
+print "Enter message, end with ^D:"
+msg = ''
+while 1:
+    line = sys.stdin.readline()
+    if not line:
+        break
+    msg = msg + line
+print "Message length is " + `len(msg)`
 
-    server = SMTP('localhost')
-    server.set_debuglevel(1)
-    server.sendmail(fromaddr, toaddrs, msg)
-    server.quit()
+server = SMTP('localhost')
+server.set_debuglevel(1)
+server.sendmail(fromaddr, toaddrs, msg)
+server.quit()
 \end{verbatim}
 
+
+\begin{seealso}
+\seetext{\rfc{821}, \emph{Simple Mail Transfer Protocol}.  Available
+online at \url{http://info.internet.isi.edu/in-notes/rfc/files/rfc821.txt}.}
+
+\seetext{\rfc{1869}, \emph{SMTP Service Extensions}.  Available online 
+at \url{http://info.internet.isi.edu/in-notes/rfc/files/rfc1869.txt}.}
+\end{seealso}