Added entries for the curses.ascii module.
diff --git a/Doc/Makefile.deps b/Doc/Makefile.deps
index 2ad97e9..7fbdd6b 100644
--- a/Doc/Makefile.deps
+++ b/Doc/Makefile.deps
@@ -218,6 +218,7 @@
../lib/libchunk.tex \
../lib/libcodeop.tex \
../lib/libcurses.tex \
+ ../lib/libascii.tex \
../lib/libdl.tex \
../lib/libmutex.tex \
../lib/libnis.tex \
diff --git a/Doc/lib/libascii.tex b/Doc/lib/libascii.tex
index 5159804..afb3595 100644
--- a/Doc/lib/libascii.tex
+++ b/Doc/lib/libascii.tex
@@ -1,131 +1,173 @@
\section{\module{curses.ascii} ---
- Constants and set-membership functions for ASCII characters.}
+ Utilities for ASCII characters}
\declaremodule{standard}{curses.ascii}
-\modulesynopsis{Constants and set-membership functions for ASCII characters.}
+\modulesynopsis{Constants and set-membership functions for
+ \ASCII{} characters.}
\moduleauthor{Eric S. Raymond}{esr@thyrsus.com}
\sectionauthor{Eric S. Raymond}{esr@thyrsus.com}
\versionadded{1.6}
-The \module{curses.ascii} module supplies name constants for ASCII characters
-and functions to test membership in various ASCII character classes.
-The constants supplied are names for control characters as follows:
+The \module{curses.ascii} module supplies name constants for
+\ASCII{} characters and functions to test membership in various
+\ASCII{} character classes. The constants supplied are names for
+control characters as follows:
-NUL, SOH, STX, ETX, EOT, ENQ, ACK, BEL, BS, TAB, HT, LF, NL, VT, FF, CR,
-SO, SI, DLE, DC1, DC2, DC3, DC4, NAK, SYN, ETB, CAN, EM, SUB, ESC, FS,
-GS, RS, US, SP, DEL.
+\begin{tableii}{l|l}{constant}{Name}{Meaning}
+ \lineii{NUL}{}
+ \lineii{SOH}{Start of heading, console interrupt}
+ \lineii{STX}{Start of text}
+ \lineii{ETX}{Ennd of text}
+ \lineii{EOT}{End of transmission}
+ \lineii{ENQ}{Enquiry, goes with \constant{ACK} flow control}
+ \lineii{ACK}{Acknowledgement}
+ \lineii{BEL}{Bell}
+ \lineii{BS}{Backspace}
+ \lineii{TAB}{Tab}
+ \lineii{HT}{Alias for \constant{TAB}: ``Horizontal tab''}
+ \lineii{LF}{Line feed}
+ \lineii{NL}{Alias for \constant{LF}: ``New line''}
+ \lineii{VT}{Vertical tab}
+ \lineii{FF}{Form feed}
+ \lineii{CR}{Carriage return}
+ \lineii{SO}{Shift-out, begin alternate character set}
+ \lineii{SI}{Shift-in, resume default character set}
+ \lineii{DLE}{Data-link escape}
+ \lineii{DC1}{XON, for flow control}
+ \lineii{DC2}{Device control 2, block-mode flow control}
+ \lineii{DC3}{XOFF, for flow control}
+ \lineii{DC4}{Device control 4}
+ \lineii{NAK}{Negative acknowledgement}
+ \lineii{SYN}{Synchronous idle}
+ \lineii{ETB}{End transmission block}
+ \lineii{CAN}{Cancel}
+ \lineii{EM}{End of medium}
+ \lineii{SUB}{Substitute}
+ \lineii{ESC}{Escape}
+ \lineii{FS}{File separator}
+ \lineii{GS}{Group separator}
+ \lineii{RS}{Record separator, block-mode terminator}
+ \lineii{US}{Unit separator}
+ \lineii{SP}{Space}
+ \lineii{DEL}{Delete}
+\end{tableii}
-NL and LF are synonyms; so are HT and TAB. The module also supplies
-the following functions, patterned on those in the standard C library:
+Note that many of these have little practical use in modern usage.
+
+The module supplies the following functions, patterned on those in the
+standard C library:
+
\begin{funcdesc}{isalnum}{c}
-Checks for an ASCII alphanumeric character; it is equivalent to
-isalpha(c) or isdigit(c))
+Checks for an \ASCII{} alphanumeric character; it is equivalent to
+\samp{isalpha(\var{c}) or isdigit(\var{c})}.
\end{funcdesc}
\begin{funcdesc}{isalpha}{c}
-Checks for an ASCII alphabetic character; it is equivalent to
-isupper(c) or islower(c))
+Checks for an \ASCII{} alphabetic character; it is equivalent to
+\samp{isupper(\var{c}) or islower(\var{c})}.
\end{funcdesc}
\begin{funcdesc}{isascii}{c}
-Checks for a character value that fits in the 7-bit ASCII set.
+Checks for a character value that fits in the 7-bit \ASCII{} set.
\end{funcdesc}
\begin{funcdesc}{isblank}{c}
-Checks for an ASCII alphanumeric character; it is equivalent to
-isalpha(c) or isdigit(c))
+Checks for an \ASCII{} whitespace character.
\end{funcdesc}
\begin{funcdesc}{iscntrl}{c}
-Checks for an ASCII control character (range 0x00 to 0x1f).
+Checks for an \ASCII{} control character (in the range 0x00 to 0x1f).
\end{funcdesc}
\begin{funcdesc}{isdigit}{c}
-Checks for an ASCII decimal digit, 0 through 9.
+Checks for an \ASCII{} decimal digit, \character{0} through
+\character{9}. This is equivalent to \samp{\var{c} in string.digits}.
\end{funcdesc}
\begin{funcdesc}{isgraph}{c}
-Checks for ASCII any printable character except space.
+Checks for \ASCII{} any printable character except space.
\end{funcdesc}
\begin{funcdesc}{islower}{c}
-Checks for an ASCII lower-case character.
+Checks for an \ASCII{} lower-case character.
\end{funcdesc}
\begin{funcdesc}{isprint}{c}
-Checks for any ASCII printable character including space.
+Checks for any \ASCII{} printable character including space.
\end{funcdesc}
\begin{funcdesc}{ispunct}{c}
-Checks for any printable ASCII character which is not a space or an
+Checks for any printable \ASCII{} character which is not a space or an
alphanumeric character.
\end{funcdesc}
\begin{funcdesc}{isspace}{c}
-Checks for ASCII white-space characters; space, tab, line feed,
+Checks for \ASCII{} white-space characters; space, tab, line feed,
carriage return, form feed, horizontal tab, vertical tab.
\end{funcdesc}
\begin{funcdesc}{isupper}{c}
-Checks for an ASCII uppercase letter.
+Checks for an \ASCII{} uppercase letter.
\end{funcdesc}
\begin{funcdesc}{isxdigit}{c}
-Checks for an ASCII hexadecimal digit, i.e. one of 0123456789abcdefABCDEF.
+Checks for an \ASCII{} hexadecimal digit. This is equivalent to
+\samp{\var{c} in string.hexdigits}.
\end{funcdesc}
\begin{funcdesc}{isctrl}{c}
-Checks for an ASCII control character, bit values 0 to 31.
+Checks for an \ASCII{} control character (ordinal values 0 to 31).
\end{funcdesc}
\begin{funcdesc}{ismeta}{c}
-Checks for a (non-ASCII) character, bit values 0x80 and above.
+Checks for a non-\ASCII{} character (ordinal values 0x80 and above).
\end{funcdesc}
These functions accept either integers or strings; when the argument
-is a string, it is first converted using the built-in function ord().
+is a string, it is first converted using the built-in function
+\function{ord()}.
Note that all these functions check ordinal bit values derived from the
first character of the string you pass in; they do not actually know
anything about the host machine's character encoding. For functions
that know about the character encoding (and handle
-internationalization properly) see the string module.
+internationalization properly) see the \refmodule{string} module.
The following two functions take either a single-character string or
integer byte value; they return a value of the same type.
\begin{funcdesc}{ascii}{c}
-Return the ASCII value corresponding to the low 7 bits of c.
+Return the ASCII value corresponding to the low 7 bits of \var{c}.
\end{funcdesc}
\begin{funcdesc}{ctrl}{c}
Return the control character corresponding to the given character
-(the character bit value is logical-anded with 0x1f).
+(the character bit value is bitwise-anded with 0x1f).
\end{funcdesc}
\begin{funcdesc}{alt}{c}
Return the 8-bit character corresponding to the given ASCII character
-(the character bit value is logical-ored with 0x80).
+(the character bit value is bitwise-ored with 0x80).
\end{funcdesc}
The following function takes either a single-character string or
-integer byte value; it returns a string.
+integer value; it returns a string.
\begin{funcdesc}{unctrl}{c}
-Return a string representation of the ASCII character c. If c is
-printable, this string is the character itself. If the character
-is a control character (0x00-0x1f) the string consists of a caret
-(^) followed by the corresponding uppercase letter. If the character
-is an ASCII delete (0x7f) the string is "^?". If the character has
-its meta bit (0x80) set, the meta bit is stripped, the preceding rules
-applied, and "!" prepended to the result.
+Return a string representation of the \ASCII{} character \var{c}. If
+\var{c} is printable, this string is the character itself. If the
+character is a control character (0x00-0x1f) the string consists of a
+caret (\character{\^}) followed by the corresponding uppercase letter.
+If the character is an \ASCII{} delete (0x7f) the string is
+\code{'\^{}?'}. If the character has its meta bit (0x80) set, the meta
+bit is stripped, the preceding rules applied, and
+\character{!} prepended to the result.
\end{funcdesc}
-Finally, the module supplies a 33-element string array
-called controlnames that contains the ASCII mnemonics for the
-thirty-two ASCII control characters from 0 (NUL) to 0x1f (US),
-in order, plus the mnemonic "SP" for space.
-
-
+\begin{datadesc}{controlnames}
+A 33-element string array that contains the \ASCII{} mnemonics for the
+thirty-two \ASCII{} control characters from 0 (NUL) to 0x1f (US), in
+order, plus the mnemonic \samp{SP} for the space character.
+\end{datadesc}