diff --git a/Lib/difflib.py b/Lib/difflib.py
index deb7361..a41d4d5 100644
--- a/Lib/difflib.py
+++ b/Lib/difflib.py
@@ -4,291 +4,142 @@
 Module difflib -- helpers for computing deltas between objects.
 
 Function get_close_matches(word, possibilities, n=3, cutoff=0.6):
-
     Use SequenceMatcher to return list of the best "good enough" matches.
 
-    word is a sequence for which close matches are desired (typically a
-    string).
+Function ndiff(a, b):
+    Return a delta: the difference between `a` and `b` (lists of strings).
 
-    possibilities is a list of sequences against which to match word
-    (typically a list of strings).
+Function restore(delta, which):
+    Return one of the two sequences that generated an ndiff delta.
 
-    Optional arg n (default 3) is the maximum number of close matches to
-    return.  n must be > 0.
+Class SequenceMatcher:
+    A flexible class for comparing pairs of sequences of any type.
 
-    Optional arg cutoff (default 0.6) is a float in [0, 1].  Possibilities
-    that don't score at least that similar to word are ignored.
-
-    The best (no more than n) matches among the possibilities are returned
-    in a list, sorted by similarity score, most similar first.
-
-    >>> get_close_matches("appel", ["ape", "apple", "peach", "puppy"])
-    ['apple', 'ape']
-    >>> import keyword
-    >>> get_close_matches("wheel", keyword.kwlist)
-    ['while']
-    >>> get_close_matches("apple", keyword.kwlist)
-    []
-    >>> get_close_matches("accept", keyword.kwlist)
-    ['except']
-
-Class SequenceMatcher
-
-SequenceMatcher is a flexible class for comparing pairs of sequences of any
-type, so long as the sequence elements are hashable.  The basic algorithm
-predates, and is a little fancier than, an algorithm published in the late
-1980's by Ratcliff and Obershelp under the hyperbolic name "gestalt pattern
-matching".  The basic idea is to find the longest contiguous matching
-subsequence that contains no "junk" elements (R-O doesn't address junk).
-The same idea is then applied recursively to the pieces of the sequences to
-the left and to the right of the matching subsequence.  This does not yield
-minimal edit sequences, but does tend to yield matches that "look right"
-to people.
-
-Example, comparing two strings, and considering blanks to be "junk":
-
->>> s = SequenceMatcher(lambda x: x == " ",
-...                     "private Thread currentThread;",
-...                     "private volatile Thread currentThread;")
->>>
-
-.ratio() returns a float in [0, 1], measuring the "similarity" of the
-sequences.  As a rule of thumb, a .ratio() value over 0.6 means the
-sequences are close matches:
-
->>> print round(s.ratio(), 3)
-0.866
->>>
-
-If you're only interested in where the sequences match,
-.get_matching_blocks() is handy:
-
->>> for block in s.get_matching_blocks():
-...     print "a[%d] and b[%d] match for %d elements" % block
-a[0] and b[0] match for 8 elements
-a[8] and b[17] match for 6 elements
-a[14] and b[23] match for 15 elements
-a[29] and b[38] match for 0 elements
-
-Note that the last tuple returned by .get_matching_blocks() is always a
-dummy, (len(a), len(b), 0), and this is the only case in which the last
-tuple element (number of elements matched) is 0.
-
-If you want to know how to change the first sequence into the second, use
-.get_opcodes():
-
->>> for opcode in s.get_opcodes():
-...     print "%6s a[%d:%d] b[%d:%d]" % opcode
- equal a[0:8] b[0:8]
-insert a[8:8] b[8:17]
- equal a[8:14] b[17:23]
- equal a[14:29] b[23:38]
-
-See Tools/scripts/ndiff.py for a fancy human-friendly file differencer,
-which uses SequenceMatcher both to view files as sequences of lines, and
-lines as sequences of characters.
-
-See also function get_close_matches() in this module, which shows how
-simple code building on SequenceMatcher can be used to do useful work.
-
-Timing:  Basic R-O is cubic time worst case and quadratic time expected
-case.  SequenceMatcher is quadratic time for the worst case and has
-expected-case behavior dependent in a complicated way on how many
-elements the sequences have in common; best case time is linear.
-
-SequenceMatcher methods:
-
-__init__(isjunk=None, a='', b='')
-    Construct a SequenceMatcher.
-
-    Optional arg isjunk is None (the default), or a one-argument function
-    that takes a sequence element and returns true iff the element is junk.
-    None is equivalent to passing "lambda x: 0", i.e. no elements are
-    considered to be junk.  For example, pass
-        lambda x: x in " \\t"
-    if you're comparing lines as sequences of characters, and don't want to
-    synch up on blanks or hard tabs.
-
-    Optional arg a is the first of two sequences to be compared.  By
-    default, an empty string.  The elements of a must be hashable.
-
-    Optional arg b is the second of two sequences to be compared.  By
-    default, an empty string.  The elements of b must be hashable.
-
-set_seqs(a, b)
-    Set the two sequences to be compared.
-
-    >>> s = SequenceMatcher()
-    >>> s.set_seqs("abcd", "bcde")
-    >>> s.ratio()
-    0.75
-
-set_seq1(a)
-    Set the first sequence to be compared.
-
-    The second sequence to be compared is not changed.
-
-    >>> s = SequenceMatcher(None, "abcd", "bcde")
-    >>> s.ratio()
-    0.75
-    >>> s.set_seq1("bcde")
-    >>> s.ratio()
-    1.0
-    >>>
-
-    SequenceMatcher computes and caches detailed information about the
-    second sequence, so if you want to compare one sequence S against many
-    sequences, use .set_seq2(S) once and call .set_seq1(x) repeatedly for
-    each of the other sequences.
-
-    See also set_seqs() and set_seq2().
-
-set_seq2(b)
-    Set the second sequence to be compared.
-
-    The first sequence to be compared is not changed.
-
-    >>> s = SequenceMatcher(None, "abcd", "bcde")
-    >>> s.ratio()
-    0.75
-    >>> s.set_seq2("abcd")
-    >>> s.ratio()
-    1.0
-    >>>
-
-    SequenceMatcher computes and caches detailed information about the
-    second sequence, so if you want to compare one sequence S against many
-    sequences, use .set_seq2(S) once and call .set_seq1(x) repeatedly for
-    each of the other sequences.
-
-    See also set_seqs() and set_seq1().
-
-find_longest_match(alo, ahi, blo, bhi)
-    Find longest matching block in a[alo:ahi] and b[blo:bhi].
-
-    If isjunk is not defined:
-
-    Return (i,j,k) such that a[i:i+k] is equal to b[j:j+k], where
-        alo <= i <= i+k <= ahi
-        blo <= j <= j+k <= bhi
-    and for all (i',j',k') meeting those conditions,
-        k >= k'
-        i <= i'
-        and if i == i', j <= j'
-
-    In other words, of all maximal matching blocks, return one that starts
-    earliest in a, and of all those maximal matching blocks that start
-    earliest in a, return the one that starts earliest in b.
-
-    >>> s = SequenceMatcher(None, " abcd", "abcd abcd")
-    >>> s.find_longest_match(0, 5, 0, 9)
-    (0, 4, 5)
-
-    If isjunk is defined, first the longest matching block is determined as
-    above, but with the additional restriction that no junk element appears
-    in the block.  Then that block is extended as far as possible by
-    matching (only) junk elements on both sides.  So the resulting block
-    never matches on junk except as identical junk happens to be adjacent
-    to an "interesting" match.
-
-    Here's the same example as before, but considering blanks to be junk.
-    That prevents " abcd" from matching the " abcd" at the tail end of the
-    second sequence directly.  Instead only the "abcd" can match, and
-    matches the leftmost "abcd" in the second sequence:
-
-    >>> s = SequenceMatcher(lambda x: x==" ", " abcd", "abcd abcd")
-    >>> s.find_longest_match(0, 5, 0, 9)
-    (1, 0, 4)
-
-    If no blocks match, return (alo, blo, 0).
-
-    >>> s = SequenceMatcher(None, "ab", "c")
-    >>> s.find_longest_match(0, 2, 0, 1)
-    (0, 0, 0)
-
-get_matching_blocks()
-    Return list of triples describing matching subsequences.
-
-    Each triple is of the form (i, j, n), and means that
-    a[i:i+n] == b[j:j+n].  The triples are monotonically increasing in i
-    and in j.
-
-    The last triple is a dummy, (len(a), len(b), 0), and is the only triple
-    with n==0.
-
-    >>> s = SequenceMatcher(None, "abxcd", "abcd")
-    >>> s.get_matching_blocks()
-    [(0, 0, 2), (3, 2, 2), (5, 4, 0)]
-
-get_opcodes()
-    Return list of 5-tuples describing how to turn a into b.
-
-    Each tuple is of the form (tag, i1, i2, j1, j2).  The first tuple has
-    i1 == j1 == 0, and remaining tuples have i1 == the i2 from the tuple
-    preceding it, and likewise for j1 == the previous j2.
-
-    The tags are strings, with these meanings:
-
-    'replace':  a[i1:i2] should be replaced by b[j1:j2]
-    'delete':   a[i1:i2] should be deleted.
-                Note that j1==j2 in this case.
-    'insert':   b[j1:j2] should be inserted at a[i1:i1].
-                Note that i1==i2 in this case.
-    'equal':    a[i1:i2] == b[j1:j2]
-
-    >>> a = "qabxcd"
-    >>> b = "abycdf"
-    >>> s = SequenceMatcher(None, a, b)
-    >>> for tag, i1, i2, j1, j2 in s.get_opcodes():
-    ...    print ("%7s a[%d:%d] (%s) b[%d:%d] (%s)" %
-    ...           (tag, i1, i2, a[i1:i2], j1, j2, b[j1:j2]))
-     delete a[0:1] (q) b[0:0] ()
-      equal a[1:3] (ab) b[0:2] (ab)
-    replace a[3:4] (x) b[2:3] (y)
-      equal a[4:6] (cd) b[3:5] (cd)
-     insert a[6:6] () b[5:6] (f)
-
-ratio()
-    Return a measure of the sequences' similarity (float in [0,1]).
-
-    Where T is the total number of elements in both sequences, and M is the
-    number of matches, this is 2,0*M / T. Note that this is 1 if the
-    sequences are identical, and 0 if they have nothing in common.
-
-    .ratio() is expensive to compute if you haven't already computed
-    .get_matching_blocks() or .get_opcodes(), in which case you may want to
-    try .quick_ratio() or .real_quick_ratio() first to get an upper bound.
-
-    >>> s = SequenceMatcher(None, "abcd", "bcde")
-    >>> s.ratio()
-    0.75
-    >>> s.quick_ratio()
-    0.75
-    >>> s.real_quick_ratio()
-    1.0
-
-quick_ratio()
-    Return an upper bound on .ratio() relatively quickly.
-
-    This isn't defined beyond that it is an upper bound on .ratio(), and
-    is faster to compute.
-
-real_quick_ratio():
-    Return an upper bound on ratio() very quickly.
-
-    This isn't defined beyond that it is an upper bound on .ratio(), and
-    is faster to compute than either .ratio() or .quick_ratio().
+Class Differ:
+    For producing human-readable deltas from sequences of lines of text.
 """
 
+__all__ = ['get_close_matches', 'ndiff', 'restore', 'SequenceMatcher',
+           'Differ']
+
 TRACE = 0
 
 class SequenceMatcher:
+
+    """
+    SequenceMatcher is a flexible class for comparing pairs of sequences of
+    any type, so long as the sequence elements are hashable.  The basic
+    algorithm predates, and is a little fancier than, an algorithm
+    published in the late 1980's by Ratcliff and Obershelp under the
+    hyperbolic name "gestalt pattern matching".  The basic idea is to find
+    the longest contiguous matching subsequence that contains no "junk"
+    elements (R-O doesn't address junk).  The same idea is then applied
+    recursively to the pieces of the sequences to the left and to the right
+    of the matching subsequence.  This does not yield minimal edit
+    sequences, but does tend to yield matches that "look right" to people.
+
+    SequenceMatcher tries to compute a "human-friendly diff" between two
+    sequences.  Unlike e.g. UNIX(tm) diff, the fundamental notion is the
+    longest *contiguous* & junk-free matching subsequence.  That's what
+    catches peoples' eyes.  The Windows(tm) windiff has another interesting
+    notion, pairing up elements that appear uniquely in each sequence.
+    That, and the method here, appear to yield more intuitive difference
+    reports than does diff.  This method appears to be the least vulnerable
+    to synching up on blocks of "junk lines", though (like blank lines in
+    ordinary text files, or maybe "<P>" lines in HTML files).  That may be
+    because this is the only method of the 3 that has a *concept* of
+    "junk" <wink>.
+
+    Example, comparing two strings, and considering blanks to be "junk":
+
+    >>> s = SequenceMatcher(lambda x: x == " ",
+    ...                     "private Thread currentThread;",
+    ...                     "private volatile Thread currentThread;")
+    >>>
+
+    .ratio() returns a float in [0, 1], measuring the "similarity" of the
+    sequences.  As a rule of thumb, a .ratio() value over 0.6 means the
+    sequences are close matches:
+
+    >>> print round(s.ratio(), 3)
+    0.866
+    >>>
+
+    If you're only interested in where the sequences match,
+    .get_matching_blocks() is handy:
+
+    >>> for block in s.get_matching_blocks():
+    ...     print "a[%d] and b[%d] match for %d elements" % block
+    a[0] and b[0] match for 8 elements
+    a[8] and b[17] match for 6 elements
+    a[14] and b[23] match for 15 elements
+    a[29] and b[38] match for 0 elements
+
+    Note that the last tuple returned by .get_matching_blocks() is always a
+    dummy, (len(a), len(b), 0), and this is the only case in which the last
+    tuple element (number of elements matched) is 0.
+
+    If you want to know how to change the first sequence into the second,
+    use .get_opcodes():
+
+    >>> for opcode in s.get_opcodes():
+    ...     print "%6s a[%d:%d] b[%d:%d]" % opcode
+     equal a[0:8] b[0:8]
+    insert a[8:8] b[8:17]
+     equal a[8:14] b[17:23]
+     equal a[14:29] b[23:38]
+
+    See the Differ class for a fancy human-friendly file differencer, which
+    uses SequenceMatcher both to compare sequences of lines, and to compare
+    sequences of characters within similar (near-matching) lines.
+
+    See also function get_close_matches() in this module, which shows how
+    simple code building on SequenceMatcher can be used to do useful work.
+
+    Timing:  Basic R-O is cubic time worst case and quadratic time expected
+    case.  SequenceMatcher is quadratic time for the worst case and has
+    expected-case behavior dependent in a complicated way on how many
+    elements the sequences have in common; best case time is linear.
+
+    Methods:
+
+    __init__(isjunk=None, a='', b='')
+        Construct a SequenceMatcher.
+
+    set_seqs(a, b)
+        Set the two sequences to be compared.
+
+    set_seq1(a)
+        Set the first sequence to be compared.
+
+    set_seq2(b)
+        Set the second sequence to be compared.
+
+    find_longest_match(alo, ahi, blo, bhi)
+        Find longest matching block in a[alo:ahi] and b[blo:bhi].
+
+    get_matching_blocks()
+        Return list of triples describing matching subsequences.
+
+    get_opcodes()
+        Return list of 5-tuples describing how to turn a into b.
+
+    ratio()
+        Return a measure of the sequences' similarity (float in [0,1]).
+
+    quick_ratio()
+        Return an upper bound on .ratio() relatively quickly.
+
+    real_quick_ratio()
+        Return an upper bound on ratio() very quickly.
+    """
+
     def __init__(self, isjunk=None, a='', b=''):
         """Construct a SequenceMatcher.
 
         Optional arg isjunk is None (the default), or a one-argument
         function that takes a sequence element and returns true iff the
-        element is junk. None is equivalent to passing "lambda x: 0", i.e.
+        element is junk.  None is equivalent to passing "lambda x: 0", i.e.
         no elements are considered to be junk.  For example, pass
             lambda x: x in " \\t"
         if you're comparing lines as sequences of characters, and don't
@@ -742,12 +593,12 @@
 
     >>> get_close_matches("appel", ["ape", "apple", "peach", "puppy"])
     ['apple', 'ape']
-    >>> import keyword
-    >>> get_close_matches("wheel", keyword.kwlist)
+    >>> import keyword as _keyword
+    >>> get_close_matches("wheel", _keyword.kwlist)
     ['while']
-    >>> get_close_matches("apple", keyword.kwlist)
+    >>> get_close_matches("apple", _keyword.kwlist)
     []
-    >>> get_close_matches("accept", keyword.kwlist)
+    >>> get_close_matches("accept", _keyword.kwlist)
     ['except']
     """
 
@@ -773,6 +624,463 @@
     # Strip scores.
     return [x for score, x in result]
 
+
+def _count_leading(line, ch):
+    """
+    Return number of `ch` characters at the start of `line`.
+
+    Example:
+
+    >>> _count_leading('   abc', ' ')
+    3
+    """
+
+    i, n = 0, len(line)
+    while i < n and line[i] == ch:
+        i += 1
+    return i
+
+class Differ:
+    r"""
+    Differ is a class for comparing sequences of lines of text, and
+    producing human-readable differences or deltas.  Differ uses
+    SequenceMatcher both to compare sequences of lines, and to compare
+    sequences of characters within similar (near-matching) lines.
+
+    Each line of a Differ delta begins with a two-letter code:
+
+        '- '    line unique to sequence 1
+        '+ '    line unique to sequence 2
+        '  '    line common to both sequences
+        '? '    line not present in either input sequence
+
+    Lines beginning with '? ' attempt to guide the eye to intraline
+    differences, and were not present in either input sequence.  These lines
+    can be confusing if the sequences contain tab characters.
+
+    Note that Differ makes no claim to produce a *minimal* diff.  To the
+    contrary, minimal diffs are often counter-intuitive, because they synch
+    up anywhere possible, sometimes accidental matches 100 pages apart.
+    Restricting synch points to contiguous matches preserves some notion of
+    locality, at the occasional cost of producing a longer diff.
+
+    Example: Comparing two texts.
+
+    First we set up the texts, sequences of individual single-line strings
+    ending with newlines (such sequences can also be obtained from the
+    `readlines()` method of file-like objects):
+
+    >>> text1 = '''  1. Beautiful is better than ugly.
+    ...   2. Explicit is better than implicit.
+    ...   3. Simple is better than complex.
+    ...   4. Complex is better than complicated.
+    ... '''.splitlines(1)
+    >>> len(text1)
+    4
+    >>> text1[0][-1]
+    '\n'
+    >>> text2 = '''  1. Beautiful is better than ugly.
+    ...   3.   Simple is better than complex.
+    ...   4. Complicated is better than complex.
+    ...   5. Flat is better than nested.
+    ... '''.splitlines(1)
+
+    Next we instantiate a Differ object:
+
+    >>> d = Differ()
+
+    Note that when instantiating a Differ object we may pass functions to
+    filter out line and character 'junk'.  See Differ.__init__ for details.
+
+    Finally, we compare the two:
+
+    >>> result = d.compare(text1, text2)
+
+    'result' is a list of strings, so let's pretty-print it:
+
+    >>> from pprint import pprint as _pprint
+    >>> _pprint(result)
+    ['    1. Beautiful is better than ugly.\n',
+     '-   2. Explicit is better than implicit.\n',
+     '-   3. Simple is better than complex.\n',
+     '+   3.   Simple is better than complex.\n',
+     '?     ++\n',
+     '-   4. Complex is better than complicated.\n',
+     '?            ^                     ---- ^\n',
+     '+   4. Complicated is better than complex.\n',
+     '?           ++++ ^                      ^\n',
+     '+   5. Flat is better than nested.\n']
+
+    As a single multi-line string it looks like this:
+
+    >>> print ''.join(result),
+        1. Beautiful is better than ugly.
+    -   2. Explicit is better than implicit.
+    -   3. Simple is better than complex.
+    +   3.   Simple is better than complex.
+    ?     ++
+    -   4. Complex is better than complicated.
+    ?            ^                     ---- ^
+    +   4. Complicated is better than complex.
+    ?           ++++ ^                      ^
+    +   5. Flat is better than nested.
+
+    Methods:
+
+    __init__(linejunk=None, charjunk=None)
+        Construct a text differencer, with optional filters.
+
+    compare(a, b)
+        Compare two sequences of lines; return the resulting delta (list).
+    """
+
+    def __init__(self, linejunk=None, charjunk=None):
+        """
+        Construct a text differencer, with optional filters.
+
+        The two optional keyword parameters are for filter functions:
+
+        - `linejunk`: A function that should accept a single string argument,
+          and return true iff the string is junk. The module-level function
+          `IS_LINE_JUNK` may be used to filter out lines without visible
+          characters, except for at most one splat ('#').
+
+        - `charjunk`: A function that should accept a string of length 1. The
+          module-level function `IS_CHARACTER_JUNK` may be used to filter out
+          whitespace characters (a blank or tab; **note**: bad idea to include
+          newline in this!).
+        """
+
+        self.linejunk = linejunk
+        self.charjunk = charjunk
+        self.results = []
+
+    def compare(self, a, b):
+        r"""
+        Compare two sequences of lines; return the resulting delta (list).
+
+        Each sequence must contain individual single-line strings ending with
+        newlines. Such sequences can be obtained from the `readlines()` method
+        of file-like objects. The list returned is also made up of
+        newline-terminated strings, ready to be used with the `writelines()`
+        method of a file-like object.
+
+        Example:
+
+        >>> print ''.join(Differ().compare('one\ntwo\nthree\n'.splitlines(1),
+        ...                                'ore\ntree\nemu\n'.splitlines(1))),
+        - one
+        ?  ^
+        + ore
+        ?  ^
+        - two
+        - three
+        ?  -
+        + tree
+        + emu
+        """
+
+        cruncher = SequenceMatcher(self.linejunk, a, b)
+        for tag, alo, ahi, blo, bhi in cruncher.get_opcodes():
+            if tag == 'replace':
+                self._fancy_replace(a, alo, ahi, b, blo, bhi)
+            elif tag == 'delete':
+                self._dump('-', a, alo, ahi)
+            elif tag == 'insert':
+                self._dump('+', b, blo, bhi)
+            elif tag == 'equal':
+                self._dump(' ', a, alo, ahi)
+            else:
+                raise ValueError, 'unknown tag ' + `tag`
+        results = self.results
+        self.results = []
+        return results
+
+    def _dump(self, tag, x, lo, hi):
+        """Store comparison results for a same-tagged range."""
+        for i in xrange(lo, hi):
+            self.results.append('%s %s' % (tag, x[i]))
+
+    def _plain_replace(self, a, alo, ahi, b, blo, bhi):
+        assert alo < ahi and blo < bhi
+        # dump the shorter block first -- reduces the burden on short-term
+        # memory if the blocks are of very different sizes
+        if bhi - blo < ahi - alo:
+            self._dump('+', b, blo, bhi)
+            self._dump('-', a, alo, ahi)
+        else:
+            self._dump('-', a, alo, ahi)
+            self._dump('+', b, blo, bhi)
+
+    def _fancy_replace(self, a, alo, ahi, b, blo, bhi):
+        r"""
+        When replacing one block of lines with another, search the blocks
+        for *similar* lines; the best-matching pair (if any) is used as a
+        synch point, and intraline difference marking is done on the
+        similar pair. Lots of work, but often worth it.
+
+        Example:
+
+        >>> d = Differ()
+        >>> d._fancy_replace(['abcDefghiJkl\n'], 0, 1, ['abcdefGhijkl\n'], 0, 1)
+        >>> print ''.join(d.results),
+        - abcDefghiJkl
+        ?    ^  ^  ^
+        + abcdefGhijkl
+        ?    ^  ^  ^
+        """
+
+        if TRACE:
+            self.results.append('*** _fancy_replace %s %s %s %s\n'
+                                % (alo, ahi, blo, bhi))
+            self._dump('>', a, alo, ahi)
+            self._dump('<', b, blo, bhi)
+
+        # don't synch up unless the lines have a similarity score of at
+        # least cutoff; best_ratio tracks the best score seen so far
+        best_ratio, cutoff = 0.74, 0.75
+        cruncher = SequenceMatcher(self.charjunk)
+        eqi, eqj = None, None   # 1st indices of equal lines (if any)
+
+        # search for the pair that matches best without being identical
+        # (identical lines must be junk lines, & we don't want to synch up
+        # on junk -- unless we have to)
+        for j in xrange(blo, bhi):
+            bj = b[j]
+            cruncher.set_seq2(bj)
+            for i in xrange(alo, ahi):
+                ai = a[i]
+                if ai == bj:
+                    if eqi is None:
+                        eqi, eqj = i, j
+                    continue
+                cruncher.set_seq1(ai)
+                # computing similarity is expensive, so use the quick
+                # upper bounds first -- have seen this speed up messy
+                # compares by a factor of 3.
+                # note that ratio() is only expensive to compute the first
+                # time it's called on a sequence pair; the expensive part
+                # of the computation is cached by cruncher
+                if cruncher.real_quick_ratio() > best_ratio and \
+                      cruncher.quick_ratio() > best_ratio and \
+                      cruncher.ratio() > best_ratio:
+                    best_ratio, best_i, best_j = cruncher.ratio(), i, j
+        if best_ratio < cutoff:
+            # no non-identical "pretty close" pair
+            if eqi is None:
+                # no identical pair either -- treat it as a straight replace
+                self._plain_replace(a, alo, ahi, b, blo, bhi)
+                return
+            # no close pair, but an identical pair -- synch up on that
+            best_i, best_j, best_ratio = eqi, eqj, 1.0
+        else:
+            # there's a close pair, so forget the identical pair (if any)
+            eqi = None
+
+        # a[best_i] very similar to b[best_j]; eqi is None iff they're not
+        # identical
+        if TRACE:
+            self.results.append('*** best_ratio %s %s %s %s\n'
+                                % (best_ratio, best_i, best_j))
+            self._dump('>', a, best_i, best_i+1)
+            self._dump('<', b, best_j, best_j+1)
+
+        # pump out diffs from before the synch point
+        self._fancy_helper(a, alo, best_i, b, blo, best_j)
+
+        # do intraline marking on the synch pair
+        aelt, belt = a[best_i], b[best_j]
+        if eqi is None:
+            # pump out a '-', '?', '+', '?' quad for the synched lines
+            atags = btags = ""
+            cruncher.set_seqs(aelt, belt)
+            for tag, ai1, ai2, bj1, bj2 in cruncher.get_opcodes():
+                la, lb = ai2 - ai1, bj2 - bj1
+                if tag == 'replace':
+                    atags += '^' * la
+                    btags += '^' * lb
+                elif tag == 'delete':
+                    atags += '-' * la
+                elif tag == 'insert':
+                    btags += '+' * lb
+                elif tag == 'equal':
+                    atags += ' ' * la
+                    btags += ' ' * lb
+                else:
+                    raise ValueError, 'unknown tag ' + `tag`
+            self._qformat(aelt, belt, atags, btags)
+        else:
+            # the synch pair is identical
+            self.results.append('  ' + aelt)
+
+        # pump out diffs from after the synch point
+        self._fancy_helper(a, best_i+1, ahi, b, best_j+1, bhi)
+
+    def _fancy_helper(self, a, alo, ahi, b, blo, bhi):
+        if alo < ahi:
+            if blo < bhi:
+                self._fancy_replace(a, alo, ahi, b, blo, bhi)
+            else:
+                self._dump('-', a, alo, ahi)
+        elif blo < bhi:
+            self._dump('+', b, blo, bhi)
+
+    def _qformat(self, aline, bline, atags, btags):
+        r"""
+        Format "?" output and deal with leading tabs.
+
+        Example:
+
+        >>> d = Differ()
+        >>> d._qformat('\tabcDefghiJkl\n', '\t\tabcdefGhijkl\n',
+        ...            '  ^ ^  ^      ', '+  ^ ^  ^      ')
+        >>> for line in d.results: print repr(line)
+        ...
+        '- \tabcDefghiJkl\n'
+        '? \t ^ ^  ^\n'
+        '+ \t\tabcdefGhijkl\n'
+        '? \t  ^ ^  ^\n'
+        """
+
+        # Can hurt, but will probably help most of the time.
+        common = min(_count_leading(aline, "\t"),
+                     _count_leading(bline, "\t"))
+        common = min(common, _count_leading(atags[:common], " "))
+        atags = atags[common:].rstrip()
+        btags = btags[common:].rstrip()
+
+        self.results.append("- " + aline)
+        if atags:
+            self.results.append("? %s%s\n" % ("\t" * common, atags))
+
+        self.results.append("+ " + bline)
+        if btags:
+            self.results.append("? %s%s\n" % ("\t" * common, btags))
+
+# With respect to junk, an earlier version of ndiff simply refused to
+# *start* a match with a junk element.  The result was cases like this:
+#     before: private Thread currentThread;
+#     after:  private volatile Thread currentThread;
+# If you consider whitespace to be junk, the longest contiguous match
+# not starting with junk is "e Thread currentThread".  So ndiff reported
+# that "e volatil" was inserted between the 't' and the 'e' in "private".
+# While an accurate view, to people that's absurd.  The current version
+# looks for matching blocks that are entirely junk-free, then extends the
+# longest one of those as far as possible but only with matching junk.
+# So now "currentThread" is matched, then extended to suck up the
+# preceding blank; then "private" is matched, and extended to suck up the
+# following blank; then "Thread" is matched; and finally ndiff reports
+# that "volatile " was inserted before "Thread".  The only quibble
+# remaining is that perhaps it was really the case that " volatile"
+# was inserted after "private".  I can live with that <wink>.
+
+import re
+
+def IS_LINE_JUNK(line, pat=re.compile(r"\s*#?\s*$").match):
+    r"""
+    Return 1 for ignorable line: iff `line` is blank or contains a single '#'.
+
+    Examples:
+
+    >>> IS_LINE_JUNK('\n')
+    1
+    >>> IS_LINE_JUNK('  #   \n')
+    1
+    >>> IS_LINE_JUNK('hello\n')
+    0
+    """
+
+    return pat(line) is not None
+
+def IS_CHARACTER_JUNK(ch, ws=" \t"):
+    r"""
+    Return 1 for ignorable character: iff `ch` is a space or tab.
+
+    Examples:
+
+    >>> IS_CHARACTER_JUNK(' ')
+    1
+    >>> IS_CHARACTER_JUNK('\t')
+    1
+    >>> IS_CHARACTER_JUNK('\n')
+    0
+    >>> IS_CHARACTER_JUNK('x')
+    0
+    """
+
+    return ch in ws
+
+del re
+
+def ndiff(a, b, linejunk=IS_LINE_JUNK, charjunk=IS_CHARACTER_JUNK):
+    r"""
+    Compare `a` and `b` (lists of strings); return a `Differ`-style delta.
+
+    Optional keyword parameters `linejunk` and `charjunk` are for filter
+    functions (or None):
+
+    - linejunk: A function that should accept a single string argument, and
+      return true iff the string is junk. The default is module-level function
+      IS_LINE_JUNK, which filters out lines without visible characters, except
+      for at most one splat ('#').
+
+    - charjunk: A function that should accept a string of length 1. The
+      default is module-level function IS_CHARACTER_JUNK, which filters out
+      whitespace characters (a blank or tab; note: bad idea to include newline
+      in this!).
+
+    Tools/scripts/ndiff.py is a command-line front-end to this function.
+
+    Example:
+
+    >>> diff = ndiff('one\ntwo\nthree\n'.splitlines(1),
+    ...              'ore\ntree\nemu\n'.splitlines(1))
+    >>> print ''.join(diff),
+    - one
+    ?  ^
+    + ore
+    ?  ^
+    - two
+    - three
+    ?  -
+    + tree
+    + emu
+    """
+    return Differ(linejunk, charjunk).compare(a, b)
+
+def restore(delta, which):
+    r"""
+    Return one of the two sequences that generated a delta.
+
+    Given a `delta` produced by `Differ.compare()` or `ndiff()`, extract
+    lines originating from file 1 or 2 (parameter `which`), stripping off line
+    prefixes.
+
+    Examples:
+
+    >>> diff = ndiff('one\ntwo\nthree\n'.splitlines(1),
+    ...              'ore\ntree\nemu\n'.splitlines(1))
+    >>> print ''.join(restore(diff, 1)),
+    one
+    two
+    three
+    >>> print ''.join(restore(diff, 2)),
+    ore
+    tree
+    emu
+    """
+    try:
+        tag = {1: "- ", 2: "+ "}[int(which)]
+    except KeyError:
+        raise ValueError, ('unknown delta choice (must be 1 or 2): %r'
+                           % which)
+    prefixes = ("  ", tag)
+    results = []
+    for line in delta:
+        if line[:2] in prefixes:
+            results.append(line[2:])
+    return results
+
 def _test():
     import doctest, difflib
     return doctest.testmod(difflib)
diff --git a/Misc/ACKS b/Misc/ACKS
index 604d2c4..cc007f7 100644
--- a/Misc/ACKS
+++ b/Misc/ACKS
@@ -144,6 +144,7 @@
 Thomas Gellekum
 Ben Gertzfield
 Jonathan Giddy
+David Goodger
 Hans de Graaff
 Duncan Grisby
 Dag Gruneau
diff --git a/Misc/NEWS b/Misc/NEWS
index a1e9fc0..97cb96e 100644
--- a/Misc/NEWS
+++ b/Misc/NEWS
@@ -3,6 +3,9 @@
 
 Tests
 
+- regrtest.py now knows which tests are expected to be skipped on some
+  platforms, allowing to give clearer test result output.
+
 - Several new tests in the standard test suite, with special thanks to
   Nick Mathewson.
 
@@ -14,6 +17,10 @@
 
 Library
 
+- New class Differ and new functions ndiff() and restore() in difflib.py.
+  These package the algorithms used by the popular Tools/scripts/ndiff.py,
+  for progammatic reuse.
+
 - New function xml.sax.saxutils.quoteattr():  Quote an XML attribute
   value using the minimal quoting required for the value; more
   reliable than using xml.sax.saxutils.escape() for attribute values.
diff --git a/Tools/scripts/ndiff.py b/Tools/scripts/ndiff.py
index ddca07d..a5468f6 100755
--- a/Tools/scripts/ndiff.py
+++ b/Tools/scripts/ndiff.py
@@ -1,11 +1,16 @@
 #! /usr/bin/env python
 
-# Module ndiff version 1.6.0
+# Module ndiff version 1.7.0
 # Released to the public domain 08-Dec-2000,
 # by Tim Peters (tim.one@home.com).
 
 # Provided as-is; use at your own risk; no warranty; no promises; enjoy!
 
+# ndiff.py is now simply a front-end to the difflib.ndiff() function.
+# Originally, it contained the difflib.SequenceMatcher class as well.
+# This completes the raiding of reusable code from this formerly
+# self-contained script.
+
 """ndiff [-q] file1 file2
     or
 ndiff (-r1 | -r2) < ndiff_output > file1_or_file2
@@ -39,217 +44,13 @@
 recovered by piping the output through
 
     sed -n '/^[+ ] /s/^..//p'
-
-See module comments for details and programmatic interface.
 """
 
-__version__ = 1, 5, 0
+__version__ = 1, 7, 0
 
-# SequenceMatcher tries to compute a "human-friendly diff" between
-# two sequences (chiefly picturing a file as a sequence of lines,
-# and a line as a sequence of characters, here).  Unlike e.g. UNIX(tm)
-# diff, the fundamental notion is the longest *contiguous* & junk-free
-# matching subsequence.  That's what catches peoples' eyes.  The
-# Windows(tm) windiff has another interesting notion, pairing up elements
-# that appear uniquely in each sequence.  That, and the method here,
-# appear to yield more intuitive difference reports than does diff.  This
-# method appears to be the least vulnerable to synching up on blocks
-# of "junk lines", though (like blank lines in ordinary text files,
-# or maybe "<P>" lines in HTML files).  That may be because this is
-# the only method of the 3 that has a *concept* of "junk" <wink>.
-#
-# Note that ndiff makes no claim to produce a *minimal* diff.  To the
-# contrary, minimal diffs are often counter-intuitive, because they
-# synch up anywhere possible, sometimes accidental matches 100 pages
-# apart.  Restricting synch points to contiguous matches preserves some
-# notion of locality, at the occasional cost of producing a longer diff.
-#
-# With respect to junk, an earlier version of ndiff simply refused to
-# *start* a match with a junk element.  The result was cases like this:
-#     before: private Thread currentThread;
-#     after:  private volatile Thread currentThread;
-# If you consider whitespace to be junk, the longest contiguous match
-# not starting with junk is "e Thread currentThread".  So ndiff reported
-# that "e volatil" was inserted between the 't' and the 'e' in "private".
-# While an accurate view, to people that's absurd.  The current version
-# looks for matching blocks that are entirely junk-free, then extends the
-# longest one of those as far as possible but only with matching junk.
-# So now "currentThread" is matched, then extended to suck up the
-# preceding blank; then "private" is matched, and extended to suck up the
-# following blank; then "Thread" is matched; and finally ndiff reports
-# that "volatile " was inserted before "Thread".  The only quibble
-# remaining is that perhaps it was really the case that " volatile"
-# was inserted after "private".  I can live with that <wink>.
-#
-# NOTE on junk:  the module-level names
-#    IS_LINE_JUNK
-#    IS_CHARACTER_JUNK
-# can be set to any functions you like.  The first one should accept
-# a single string argument, and return true iff the string is junk.
-# The default is whether the regexp r"\s*#?\s*$" matches (i.e., a
-# line without visible characters, except for at most one splat).
-# The second should accept a string of length 1 etc.  The default is
-# whether the character is a blank or tab (note: bad idea to include
-# newline in this!).
-#
-# After setting those, you can call fcompare(f1name, f2name) with the
-# names of the files you want to compare.  The difference report
-# is sent to stdout.  Or you can call main(args), passing what would
-# have been in sys.argv[1:] had the cmd-line form been used.
-
-from difflib import SequenceMatcher
-
-import string
-TRACE = 0
-
-# define what "junk" means
-import re
-
-def IS_LINE_JUNK(line, pat=re.compile(r"\s*#?\s*$").match):
-    return pat(line) is not None
-
-def IS_CHARACTER_JUNK(ch, ws=" \t"):
-    return ch in ws
-
-del re
-
-# meant for dumping lines
-def dump(tag, x, lo, hi):
-    for i in xrange(lo, hi):
-        print tag, x[i],
-
-def plain_replace(a, alo, ahi, b, blo, bhi):
-    assert alo < ahi and blo < bhi
-    # dump the shorter block first -- reduces the burden on short-term
-    # memory if the blocks are of very different sizes
-    if bhi - blo < ahi - alo:
-        dump('+', b, blo, bhi)
-        dump('-', a, alo, ahi)
-    else:
-        dump('-', a, alo, ahi)
-        dump('+', b, blo, bhi)
-
-# When replacing one block of lines with another, this guy searches
-# the blocks for *similar* lines; the best-matching pair (if any) is
-# used as a synch point, and intraline difference marking is done on
-# the similar pair.  Lots of work, but often worth it.
-
-def fancy_replace(a, alo, ahi, b, blo, bhi):
-    if TRACE:
-        print '*** fancy_replace', alo, ahi, blo, bhi
-        dump('>', a, alo, ahi)
-        dump('<', b, blo, bhi)
-
-    # don't synch up unless the lines have a similarity score of at
-    # least cutoff; best_ratio tracks the best score seen so far
-    best_ratio, cutoff = 0.74, 0.75
-    cruncher = SequenceMatcher(IS_CHARACTER_JUNK)
-    eqi, eqj = None, None   # 1st indices of equal lines (if any)
-
-    # search for the pair that matches best without being identical
-    # (identical lines must be junk lines, & we don't want to synch up
-    # on junk -- unless we have to)
-    for j in xrange(blo, bhi):
-        bj = b[j]
-        cruncher.set_seq2(bj)
-        for i in xrange(alo, ahi):
-            ai = a[i]
-            if ai == bj:
-                if eqi is None:
-                    eqi, eqj = i, j
-                continue
-            cruncher.set_seq1(ai)
-            # computing similarity is expensive, so use the quick
-            # upper bounds first -- have seen this speed up messy
-            # compares by a factor of 3.
-            # note that ratio() is only expensive to compute the first
-            # time it's called on a sequence pair; the expensive part
-            # of the computation is cached by cruncher
-            if cruncher.real_quick_ratio() > best_ratio and \
-                  cruncher.quick_ratio() > best_ratio and \
-                  cruncher.ratio() > best_ratio:
-                best_ratio, best_i, best_j = cruncher.ratio(), i, j
-    if best_ratio < cutoff:
-        # no non-identical "pretty close" pair
-        if eqi is None:
-            # no identical pair either -- treat it as a straight replace
-            plain_replace(a, alo, ahi, b, blo, bhi)
-            return
-        # no close pair, but an identical pair -- synch up on that
-        best_i, best_j, best_ratio = eqi, eqj, 1.0
-    else:
-        # there's a close pair, so forget the identical pair (if any)
-        eqi = None
-
-    # a[best_i] very similar to b[best_j]; eqi is None iff they're not
-    # identical
-    if TRACE:
-        print '*** best_ratio', best_ratio, best_i, best_j
-        dump('>', a, best_i, best_i+1)
-        dump('<', b, best_j, best_j+1)
-
-    # pump out diffs from before the synch point
-    fancy_helper(a, alo, best_i, b, blo, best_j)
-
-    # do intraline marking on the synch pair
-    aelt, belt = a[best_i], b[best_j]
-    if eqi is None:
-        # pump out a '-', '?', '+', '?' quad for the synched lines
-        atags = btags = ""
-        cruncher.set_seqs(aelt, belt)
-        for tag, ai1, ai2, bj1, bj2 in cruncher.get_opcodes():
-            la, lb = ai2 - ai1, bj2 - bj1
-            if tag == 'replace':
-                atags += '^' * la
-                btags += '^' * lb
-            elif tag == 'delete':
-                atags += '-' * la
-            elif tag == 'insert':
-                btags += '+' * lb
-            elif tag == 'equal':
-                atags += ' ' * la
-                btags += ' ' * lb
-            else:
-                raise ValueError, 'unknown tag ' + `tag`
-        printq(aelt, belt, atags, btags)
-    else:
-        # the synch pair is identical
-        print ' ', aelt,
-
-    # pump out diffs from after the synch point
-    fancy_helper(a, best_i+1, ahi, b, best_j+1, bhi)
-
-def fancy_helper(a, alo, ahi, b, blo, bhi):
-    if alo < ahi:
-        if blo < bhi:
-            fancy_replace(a, alo, ahi, b, blo, bhi)
-        else:
-            dump('-', a, alo, ahi)
-    elif blo < bhi:
-        dump('+', b, blo, bhi)
-
-# Crap to deal with leading tabs in "?" output.  Can hurt, but will
-# probably help most of the time.
-
-def printq(aline, bline, atags, btags):
-    common = min(count_leading(aline, "\t"),
-                 count_leading(bline, "\t"))
-    common = min(common, count_leading(atags[:common], " "))
-    print "-", aline,
-    if count_leading(atags, " ") < len(atags):
-        print "?", "\t" * common + atags[common:]
-    print "+", bline,
-    if count_leading(btags, " ") < len(btags):
-        print "?", "\t" * common + btags[common:]
-
-def count_leading(line, ch):
-    i, n = 0, len(line)
-    while i < n and line[i] == ch:
-        i += 1
-    return i
+import difflib, sys
 
 def fail(msg):
-    import sys
     out = sys.stderr.write
     out(msg + "\n\n")
     out(__doc__)
@@ -273,18 +74,8 @@
     a = f1.readlines(); f1.close()
     b = f2.readlines(); f2.close()
 
-    cruncher = SequenceMatcher(IS_LINE_JUNK, a, b)
-    for tag, alo, ahi, blo, bhi in cruncher.get_opcodes():
-        if tag == 'replace':
-            fancy_replace(a, alo, ahi, b, blo, bhi)
-        elif tag == 'delete':
-            dump('-', a, alo, ahi)
-        elif tag == 'insert':
-            dump('+', b, blo, bhi)
-        elif tag == 'equal':
-            dump(' ', a, alo, ahi)
-        else:
-            raise ValueError, 'unknown tag ' + `tag`
+    diff = difflib.ndiff(a, b)
+    sys.stdout.writelines(diff)
 
     return 1
 
@@ -323,16 +114,14 @@
         print '+:', f2name
     return fcompare(f1name, f2name)
 
+# read ndiff output from stdin, and print file1 (which=='1') or
+# file2 (which=='2') to stdout
+
 def restore(which):
-    import sys
-    tag = {"1": "- ", "2": "+ "}[which]
-    prefixes = ("  ", tag)
-    for line in sys.stdin.readlines():
-        if line[:2] in prefixes:
-            print line[2:],
+    restored = difflib.restore(sys.stdin.readlines(), which)
+    sys.stdout.writelines(restored)
 
 if __name__ == '__main__':
-    import sys
     args = sys.argv[1:]
     if "-profile" in args:
         import profile, pstats