Merged revisions 68133-68134,68141-68142,68145-68146,68148-68149,68159-68162,68166,68171-68174,68179,68195-68196,68210,68214-68215,68217-68222 via svnmerge from
svn+ssh://pythondev@svn.python.org/python/trunk
........
r68133 | antoine.pitrou | 2009-01-01 16:38:03 +0100 (Thu, 01 Jan 2009) | 1 line
fill in actual issue number in tests
........
r68134 | hirokazu.yamamoto | 2009-01-01 16:45:39 +0100 (Thu, 01 Jan 2009) | 2 lines
Issue #4797: IOError.filename was not set when _fileio.FileIO failed to open
file with `str' filename on Windows.
........
r68141 | benjamin.peterson | 2009-01-01 17:43:12 +0100 (Thu, 01 Jan 2009) | 1 line
fix highlighting
........
r68142 | benjamin.peterson | 2009-01-01 18:29:49 +0100 (Thu, 01 Jan 2009) | 2 lines
welcome to 2009, Python!
........
r68145 | amaury.forgeotdarc | 2009-01-02 01:03:54 +0100 (Fri, 02 Jan 2009) | 5 lines
#4801 _collections module fails to build on cygwin.
_PyObject_GC_TRACK is the macro version of PyObject_GC_Track,
and according to documentation it should not be used for extension modules.
........
r68146 | ronald.oussoren | 2009-01-02 11:44:46 +0100 (Fri, 02 Jan 2009) | 2 lines
Fix for issue4472: "configure --enable-shared doesn't work on OSX"
........
r68148 | ronald.oussoren | 2009-01-02 11:48:31 +0100 (Fri, 02 Jan 2009) | 2 lines
Forgot to add a NEWS item in my previous checkin
........
r68149 | ronald.oussoren | 2009-01-02 11:50:48 +0100 (Fri, 02 Jan 2009) | 2 lines
Fix for issue4780
........
r68159 | ronald.oussoren | 2009-01-02 15:48:17 +0100 (Fri, 02 Jan 2009) | 2 lines
Fix for issue 1627952
........
r68160 | ronald.oussoren | 2009-01-02 15:52:09 +0100 (Fri, 02 Jan 2009) | 2 lines
Fix for issue r1737832
........
r68161 | ronald.oussoren | 2009-01-02 16:00:05 +0100 (Fri, 02 Jan 2009) | 3 lines
Fix for issue 1149804
........
r68162 | ronald.oussoren | 2009-01-02 16:06:00 +0100 (Fri, 02 Jan 2009) | 3 lines
Fix for issue 4472 is incompatible with Cygwin, this patch
should fix that.
........
r68166 | benjamin.peterson | 2009-01-02 19:26:23 +0100 (Fri, 02 Jan 2009) | 1 line
document PyMemberDef
........
r68171 | georg.brandl | 2009-01-02 21:25:14 +0100 (Fri, 02 Jan 2009) | 3 lines
#4811: fix markup glitches (mostly remains of the conversion),
found by Gabriel Genellina.
........
r68172 | martin.v.loewis | 2009-01-02 21:32:55 +0100 (Fri, 02 Jan 2009) | 2 lines
Issue #4075: Use OutputDebugStringW in Py_FatalError.
........
r68173 | martin.v.loewis | 2009-01-02 21:40:14 +0100 (Fri, 02 Jan 2009) | 2 lines
Issue #4051: Prevent conflict of UNICODE macros in cPickle.
........
r68174 | benjamin.peterson | 2009-01-02 21:47:27 +0100 (Fri, 02 Jan 2009) | 1 line
fix compilation on non-Windows platforms
........
r68179 | raymond.hettinger | 2009-01-02 22:26:45 +0100 (Fri, 02 Jan 2009) | 1 line
Issue #4615. Document how to use itertools for de-duping.
........
r68195 | georg.brandl | 2009-01-03 14:45:15 +0100 (Sat, 03 Jan 2009) | 2 lines
Remove useless string literal.
........
r68196 | georg.brandl | 2009-01-03 15:29:53 +0100 (Sat, 03 Jan 2009) | 2 lines
Fix indentation.
........
r68210 | georg.brandl | 2009-01-03 20:10:12 +0100 (Sat, 03 Jan 2009) | 2 lines
Set eol-style correctly for mp_distributing.py.
........
r68214 | georg.brandl | 2009-01-03 20:44:48 +0100 (Sat, 03 Jan 2009) | 2 lines
Make indentation consistent.
........
r68215 | georg.brandl | 2009-01-03 21:15:14 +0100 (Sat, 03 Jan 2009) | 2 lines
Fix role name.
........
r68217 | georg.brandl | 2009-01-03 21:30:15 +0100 (Sat, 03 Jan 2009) | 2 lines
Add rstlint, a little tool to find subtle markup problems and inconsistencies in the Doc sources.
........
r68218 | georg.brandl | 2009-01-03 21:38:59 +0100 (Sat, 03 Jan 2009) | 2 lines
Recognize usage of the default role.
........
r68219 | georg.brandl | 2009-01-03 21:47:01 +0100 (Sat, 03 Jan 2009) | 2 lines
Fix uses of the default role.
........
r68220 | georg.brandl | 2009-01-03 21:55:06 +0100 (Sat, 03 Jan 2009) | 2 lines
Remove trailing whitespace.
........
r68221 | georg.brandl | 2009-01-03 22:04:55 +0100 (Sat, 03 Jan 2009) | 2 lines
Remove tabs from the documentation.
........
r68222 | georg.brandl | 2009-01-03 22:11:58 +0100 (Sat, 03 Jan 2009) | 2 lines
Disable the line length checker by default.
........
diff --git a/Doc/using/cmdline.rst b/Doc/using/cmdline.rst
index 954df89..643464b 100644
--- a/Doc/using/cmdline.rst
+++ b/Doc/using/cmdline.rst
@@ -8,8 +8,8 @@
The CPython interpreter scans the command line and the environment for various
settings.
-.. note::
-
+.. note::
+
Other implementations' command line schemes may differ. See
:ref:`implementations` for further resources.
@@ -61,7 +61,7 @@
Execute the Python code in *command*. *command* can be one ore more
statements separated by newlines, with significant leading whitespace as in
normal module code.
-
+
If this option is given, the first element of :data:`sys.argv` will be
``"-c"`` and the current directory will be added to the start of
:data:`sys.path` (allowing modules in that directory to be imported as top
@@ -72,7 +72,7 @@
Search :data:`sys.path` for the named module and execute its contents as
the :mod:`__main__` module.
-
+
Since the argument is a *module* name, you must not give a file extension
(``.py``). The ``module-name`` should be a valid Python module name, but
the implementation may not always enforce this (e.g. it may allow you to
@@ -84,18 +84,18 @@
written in C, since they do not have Python module files. However, it
can still be used for precompiled modules, even if the original source
file is not available.
-
+
If this option is given, the first element of :data:`sys.argv` will be the
full path to the module file. As with the :option:`-c` option, the current
directory will be added to the start of :data:`sys.path`.
-
+
Many standard library modules contain code that is invoked on their execution
as a script. An example is the :mod:`timeit` module::
python -mtimeit -s 'setup here' 'benchmarked code here'
python -mtimeit -h # for details
- .. seealso::
+ .. seealso::
:func:`runpy.run_module`
The actual implementation of this feature.
@@ -163,7 +163,7 @@
--version
Print the Python version number and exit. Example output could be::
-
+
Python 2.5.1
.. versionchanged:: 2.5
@@ -201,7 +201,7 @@
enter interactive mode after executing the script or the command, even when
:data:`sys.stdin` does not appear to be a terminal. The
:envvar:`PYTHONSTARTUP` file is not read.
-
+
This can be useful to inspect global variables or a stack trace when a script
raises an exception. See also :envvar:`PYTHONINSPECT`.
@@ -221,7 +221,7 @@
.. cmdoption:: -Q <arg>
Division control. The argument must be one of the following:
-
+
``old``
division of int/int and long/long return an int or long (*default*)
``new``
@@ -264,10 +264,10 @@
.. cmdoption:: -u
-
+
Force stdin, stdout and stderr to be totally unbuffered. On systems where it
matters, also put stdin, stdout and stderr in binary mode.
-
+
Note that there is internal buffering in :meth:`file.readlines` and
:ref:`bltin-file-objects` (``for line in sys.stdin``) which is not influenced
by this option. To work around this, you will want to use
@@ -279,7 +279,7 @@
.. XXX should the -U option be documented?
.. cmdoption:: -v
-
+
Print a message each time a module is initialized, showing the place
(filename or built-in module) from which it is loaded. When given twice
(:option:`-vv`), print a message for each file that is checked for when
@@ -288,13 +288,13 @@
.. cmdoption:: -W arg
-
+
Warning control. Python's warning machinery by default prints warning
messages to :data:`sys.stderr`. A typical warning message has the following
form::
file:line: category: message
-
+
By default, each warning is printed once for each source line where it
occurs. This option controls how often warnings are printed.
@@ -302,13 +302,13 @@
one option, the action for the last matching option is performed. Invalid
:option:`-W` options are ignored (though, a warning message is printed about
invalid options when the first warning is issued).
-
+
Warnings can also be controlled from within a Python program using the
:mod:`warnings` module.
The simplest form of argument is one of the following action strings (or a
unique abbreviation):
-
+
``ignore``
Ignore all warnings.
``default``
@@ -324,9 +324,9 @@
Print each warning only the first time it occurs in the program.
``error``
Raise an exception instead of printing a warning message.
-
- The full form of argument is::
-
+
+ The full form of argument is::
+
action:message:category:module:line
Here, *action* is as explained above but only applies to messages that match
@@ -347,10 +347,10 @@
.. cmdoption:: -x
-
+
Skip the first line of the source, allowing use of non-Unix forms of
``#!cmd``. This is intended for a DOS specific hack only.
-
+
.. warning:: The line numbers in error messages will be off by one!
@@ -380,13 +380,13 @@
These environment variables influence Python's behavior.
.. envvar:: PYTHONHOME
-
+
Change the location of the standard Python libraries. By default, the
libraries are searched in :file:`{prefix}/lib/python{version}` and
:file:`{exec_prefix}/lib/python{version}`, where :file:`{prefix}` and
:file:`{exec_prefix}` are installation-dependent directories, both defaulting
to :file:`/usr/local`.
-
+
When :envvar:`PYTHONHOME` is set to a single directory, its value replaces
both :file:`{prefix}` and :file:`{exec_prefix}`. To specify different values
for these, set :envvar:`PYTHONHOME` to :file:`{prefix}:{exec_prefix}`.
@@ -402,11 +402,11 @@
In addition to normal directories, individual :envvar:`PYTHONPATH` entries
may refer to zipfiles containing pure Python modules (in either source or
compiled form). Extension modules cannot be imported from zipfiles.
-
+
The default search path is installation dependent, but generally begins with
- :file:`{prefix}/lib/python{version}`` (see :envvar:`PYTHONHOME` above). It
+ :file:`{prefix}/lib/python{version}` (see :envvar:`PYTHONHOME` above). It
is *always* appended to :envvar:`PYTHONPATH`.
-
+
An additional directory will be inserted in the search path in front of
:envvar:`PYTHONPATH` as described above under
:ref:`using-on-interface-options`. The search path can be manipulated from
@@ -414,7 +414,7 @@
.. envvar:: PYTHONSTARTUP
-
+
If this is the name of a readable file, the Python commands in that file are
executed before the first prompt is displayed in interactive mode. The file
is executed in the same namespace where interactive commands are executed so
@@ -424,7 +424,7 @@
.. envvar:: PYTHONY2K
-
+
Set this to a non-empty string to cause the :mod:`time` module to require
dates specified as strings to include 4-digit years, otherwise 2-digit years
are converted based on rules described in the :mod:`time` module
@@ -432,21 +432,21 @@
.. envvar:: PYTHONOPTIMIZE
-
+
If this is set to a non-empty string it is equivalent to specifying the
:option:`-O` option. If set to an integer, it is equivalent to specifying
:option:`-O` multiple times.
.. envvar:: PYTHONDEBUG
-
+
If this is set to a non-empty string it is equivalent to specifying the
:option:`-d` option. If set to an integer, it is equivalent to specifying
:option:`-d` multiple times.
.. envvar:: PYTHONINSPECT
-
+
If this is set to a non-empty string it is equivalent to specifying the
:option:`-i` option.
@@ -455,20 +455,20 @@
.. envvar:: PYTHONUNBUFFERED
-
+
If this is set to a non-empty string it is equivalent to specifying the
:option:`-u` option.
.. envvar:: PYTHONVERBOSE
-
+
If this is set to a non-empty string it is equivalent to specifying the
:option:`-v` option. If set to an integer, it is equivalent to specifying
:option:`-v` multiple times.
.. envvar:: PYTHONCASEOK
-
+
If this is set, Python ignores case in :keyword:`import` statements. This
only works on Windows.
diff --git a/Doc/using/unix.rst b/Doc/using/unix.rst
index 2ab5ee1..3d562a8 100644
--- a/Doc/using/unix.rst
+++ b/Doc/using/unix.rst
@@ -19,7 +19,7 @@
package on all others. However there are certain features you might want to use
that are not available on your distro's package. You can easily compile the
latest version of Python from source.
-
+
In the event that Python doesn't come preinstalled and isn't in the repositories as
well, you can easily make packages for your own distro. Have a look at the
following links:
@@ -45,8 +45,8 @@
* OpenBSD users use::
- pkg_add ftp://ftp.openbsd.org/pub/OpenBSD/4.2/packages/<insert your architecture here>/python-<version>.tgz
-
+ pkg_add ftp://ftp.openbsd.org/pub/OpenBSD/4.2/packages/<insert your architecture here>/python-<version>.tgz
+
For example i386 users get the 2.5.1 version of Python using::
pkg_add ftp://ftp.openbsd.org/pub/OpenBSD/4.2/packages/i386/python-2.5.1p2.tgz
@@ -87,7 +87,7 @@
Python-related paths and files
==============================
-
+
These are subject to difference depending on local installation conventions;
:envvar:`prefix` (``${prefix}``) and :envvar:`exec_prefix` (``${exec_prefix}``)
are installation-dependent and should be interpreted as for GNU software; they
@@ -112,7 +112,7 @@
| | by the user module; not used by default |
| | or by most applications. |
+-----------------------------------------------+------------------------------------------+
-
+
Miscellaneous
=============
diff --git a/Doc/using/windows.rst b/Doc/using/windows.rst
index 393ac27..5aa91b1 100644
--- a/Doc/using/windows.rst
+++ b/Doc/using/windows.rst
@@ -88,9 +88,9 @@
---------------------------------------
Windows has a built-in dialog for changing environment variables (following
-guide applies to XP classical view): Right-click the icon for your machine
-(usually located on your Desktop and called "My Computer") and choose
-:menuselection:`Properties` there. Then, open the :guilabel:`Advanced` tab
+guide applies to XP classical view): Right-click the icon for your machine
+(usually located on your Desktop and called "My Computer") and choose
+:menuselection:`Properties` there. Then, open the :guilabel:`Advanced` tab
and click the :guilabel:`Environment Variables` button.
In short, your path is:
@@ -193,11 +193,11 @@
#. Launch a command prompt.
#. Associate the correct file group with ``.py`` scripts::
-
+
assoc .py=Python.File
#. Redirect all Python files to the new executable::
-
+
ftype Python.File=C:\Path\to\pythonw.exe "%1" %*