| # module 're' -- A collection of regular expression operations |
| |
| r"""Support for regular expressions (RE). |
| |
| This module provides regular expression matching operations similar to |
| those found in Perl. It's 8-bit clean: the strings being processed may |
| contain both null bytes and characters whose high bit is set. Regular |
| expression pattern strings may not contain null bytes, but can specify |
| the null byte using the \\number notation. Characters with the high |
| bit set may be included. |
| |
| Regular expressions can contain both special and ordinary |
| characters. Most ordinary characters, like "A", "a", or "0", are the |
| simplest regular expressions; they simply match themselves. You can |
| concatenate ordinary characters, so last matches the string 'last'. |
| |
| The special characters are: |
| "." Matches any character except a newline. |
| "^" Matches the start of the string. |
| "$" Matches the end of the string. |
| "*" Matches 0 or more (greedy) repetitions of the preceding RE. |
| Greedy means that it will match as many repetitions as possible. |
| "+" Matches 1 or more (greedy) repetitions of the preceding RE. |
| "?" Matches 0 or 1 (greedy) of the preceding RE. |
| *?,+?,?? Non-greedy versions of the previous three special characters. |
| {m,n} Matches from m to n repetitions of the preceding RE. |
| {m,n}? Non-greedy version of the above. |
| "\\" Either escapes special characters or signals a special sequence. |
| [] Indicates a set of characters. |
| A "^" as the first character indicates a complementing set. |
| "|" A|B, creates an RE that will match either A or B. |
| (...) Matches the RE inside the parentheses. |
| The contents can be retrieved or matched later in the string. |
| (?iLmsx) Set the I, L, M, S, or X flag for the RE. |
| (?:...) Non-grouping version of regular parentheses. |
| (?P<name>...) The substring matched by the group is accessible by name. |
| (?P=name) Matches the text matched earlier by the group named name. |
| (?#...) A comment; ignored. |
| (?=...) Matches if ... matches next, but doesn't consume the string. |
| (?!...) Matches if ... doesn't match next. |
| |
| The special sequences consist of "\\" and a character from the list |
| below. If the ordinary character is not on the list, then the |
| resulting RE will match the second character. |
| \\number Matches the contents of the group of the same number. |
| \\A Matches only at the start of the string. |
| \\Z Matches only at the end of the string. |
| \\b Matches the empty string, but only at the start or end of a word. |
| \\B Matches the empty string, but not at the start or end of a word. |
| \\d Matches any decimal digit; equivalent to the set [0-9]. |
| \\D Matches any non-digit character; equivalent to the set [^0-9]. |
| \\s Matches any whitespace character; equivalent to [ \\t\\n\\r\\f\\v]. |
| \\S Matches any non-whitespace character; equiv. to [^ \\t\\n\\r\\f\\v]. |
| \\w Matches any alphanumeric character; equivalent to [a-zA-Z0-9_]. |
| With LOCALE, it will match the set [0-9_] plus characters defined |
| as letters for the current locale. |
| \\W Matches the complement of \\w. |
| \\\\ Matches a literal backslash. |
| |
| This module exports the following functions: |
| match Match a regular expression pattern to the beginning of a string. |
| search Search a string for the presence of a pattern. |
| sub Substitute occurrences of a pattern found in a string. |
| subn Same as sub, but also return the number of substitutions made. |
| split Split a string by the occurrences of a pattern. |
| findall Find all occurrences of a pattern in a string. |
| compile Compile a pattern into a RegexObject. |
| escape Backslash all non-alphanumerics in a string. |
| |
| This module exports the following classes: |
| RegexObject Holds a compiled regular expression pattern. |
| MatchObject Contains information about pattern matches. |
| |
| Some of the functions in this module takes flags as optional parameters: |
| I IGNORECASE Perform case-insensitive matching. |
| L LOCALE Make \w, \W, \b, \B, dependent on the current locale. |
| M MULTILINE "^" matches the beginning of lines as well as the string. |
| "$" matches the end of lines as well as the string. |
| S DOTALL "." matches any character at all, including the newline. |
| X VERBOSE Ignore whitespace and comments for nicer looking RE's. |
| |
| This module also defines an exception 'error'. |
| |
| """ |
| |
| |
| import sys |
| from pcre import * |
| |
| # XXX This module is deprecated as of Python 2.3, and should be removed |
| # in the version that follows 2.3. |
| import warnings as _warnings |
| _warnings.warn("Please use the 're' module, not the 'pre' module", |
| DeprecationWarning) |
| |
| __all__ = ["match","search","sub","subn","split","findall","escape","compile", |
| "I","L","M","S","X","IGNORECASE","LOCALE","MULTILINE","DOTALL", |
| "VERBOSE","error"] |
| |
| # |
| # First, the public part of the interface: |
| # |
| |
| # pcre.error and re.error should be the same, since exceptions can be |
| # raised from either module. |
| |
| # compilation flags |
| |
| I = IGNORECASE |
| L = LOCALE |
| M = MULTILINE |
| S = DOTALL |
| X = VERBOSE |
| |
| |
| # |
| # |
| # |
| |
| _cache = {} |
| _MAXCACHE = 20 |
| |
| def _cachecompile(pattern, flags=0): |
| key = (pattern, flags) |
| try: |
| return _cache[key] |
| except KeyError: |
| pass |
| value = compile(pattern, flags) |
| if len(_cache) >= _MAXCACHE: |
| _cache.clear() |
| _cache[key] = value |
| return value |
| |
| def match(pattern, string, flags=0): |
| """match (pattern, string[, flags]) -> MatchObject or None |
| |
| If zero or more characters at the beginning of string match the |
| regular expression pattern, return a corresponding MatchObject |
| instance. Return None if the string does not match the pattern; |
| note that this is different from a zero-length match. |
| |
| Note: If you want to locate a match anywhere in string, use |
| search() instead. |
| |
| """ |
| |
| return _cachecompile(pattern, flags).match(string) |
| |
| def search(pattern, string, flags=0): |
| """search (pattern, string[, flags]) -> MatchObject or None |
| |
| Scan through string looking for a location where the regular |
| expression pattern produces a match, and return a corresponding |
| MatchObject instance. Return None if no position in the string |
| matches the pattern; note that this is different from finding a |
| zero-length match at some point in the string. |
| |
| """ |
| return _cachecompile(pattern, flags).search(string) |
| |
| def sub(pattern, repl, string, count=0): |
| """sub(pattern, repl, string[, count=0]) -> string |
| |
| Return the string obtained by replacing the leftmost |
| non-overlapping occurrences of pattern in string by the |
| replacement repl. If the pattern isn't found, string is returned |
| unchanged. repl can be a string or a function; if a function, it |
| is called for every non-overlapping occurrence of pattern. The |
| function takes a single match object argument, and returns the |
| replacement string. |
| |
| The pattern may be a string or a regex object; if you need to |
| specify regular expression flags, you must use a regex object, or |
| use embedded modifiers in a pattern; e.g. |
| sub("(?i)b+", "x", "bbbb BBBB") returns 'x x'. |
| |
| The optional argument count is the maximum number of pattern |
| occurrences to be replaced; count must be a non-negative integer, |
| and the default value of 0 means to replace all occurrences. |
| |
| """ |
| if type(pattern) == type(''): |
| pattern = _cachecompile(pattern) |
| return pattern.sub(repl, string, count) |
| |
| def subn(pattern, repl, string, count=0): |
| """subn(pattern, repl, string[, count=0]) -> (string, num substitutions) |
| |
| Perform the same operation as sub(), but return a tuple |
| (new_string, number_of_subs_made). |
| |
| """ |
| if type(pattern) == type(''): |
| pattern = _cachecompile(pattern) |
| return pattern.subn(repl, string, count) |
| |
| def split(pattern, string, maxsplit=0): |
| """split(pattern, string[, maxsplit=0]) -> list of strings |
| |
| Split string by the occurrences of pattern. If capturing |
| parentheses are used in pattern, then the text of all groups in |
| the pattern are also returned as part of the resulting list. If |
| maxsplit is nonzero, at most maxsplit splits occur, and the |
| remainder of the string is returned as the final element of the |
| list. |
| |
| """ |
| if type(pattern) == type(''): |
| pattern = _cachecompile(pattern) |
| return pattern.split(string, maxsplit) |
| |
| def findall(pattern, string): |
| """findall(pattern, string) -> list |
| |
| Return a list of all non-overlapping matches of pattern in |
| string. If one or more groups are present in the pattern, return a |
| list of groups; this will be a list of tuples if the pattern has |
| more than one group. Empty matches are included in the result. |
| |
| """ |
| if type(pattern) == type(''): |
| pattern = _cachecompile(pattern) |
| return pattern.findall(string) |
| |
| def escape(pattern): |
| """escape(string) -> string |
| |
| Return string with all non-alphanumerics backslashed; this is |
| useful if you want to match an arbitrary literal string that may |
| have regular expression metacharacters in it. |
| |
| """ |
| result = list(pattern) |
| for i in range(len(pattern)): |
| char = pattern[i] |
| if not char.isalnum(): |
| if char=='\000': result[i] = '\\000' |
| else: result[i] = '\\'+char |
| return ''.join(result) |
| |
| def compile(pattern, flags=0): |
| """compile(pattern[, flags]) -> RegexObject |
| |
| Compile a regular expression pattern into a regular expression |
| object, which can be used for matching using its match() and |
| search() methods. |
| |
| """ |
| groupindex={} |
| code=pcre_compile(pattern, flags, groupindex) |
| return RegexObject(pattern, flags, code, groupindex) |
| |
| |
| # |
| # Class definitions |
| # |
| |
| class RegexObject: |
| """Holds a compiled regular expression pattern. |
| |
| Methods: |
| match Match the pattern to the beginning of a string. |
| search Search a string for the presence of the pattern. |
| sub Substitute occurrences of the pattern found in a string. |
| subn Same as sub, but also return the number of substitutions made. |
| split Split a string by the occurrences of the pattern. |
| findall Find all occurrences of the pattern in a string. |
| |
| """ |
| |
| def __init__(self, pattern, flags, code, groupindex): |
| self.code = code |
| self.flags = flags |
| self.pattern = pattern |
| self.groupindex = groupindex |
| |
| def search(self, string, pos=0, endpos=None): |
| """search(string[, pos][, endpos]) -> MatchObject or None |
| |
| Scan through string looking for a location where this regular |
| expression produces a match, and return a corresponding |
| MatchObject instance. Return None if no position in the string |
| matches the pattern; note that this is different from finding |
| a zero-length match at some point in the string. The optional |
| pos and endpos parameters have the same meaning as for the |
| match() method. |
| |
| """ |
| if endpos is None or endpos>len(string): |
| endpos=len(string) |
| if endpos<pos: endpos=pos |
| regs = self.code.match(string, pos, endpos, 0) |
| if regs is None: |
| return None |
| self._num_regs=len(regs) |
| |
| return MatchObject(self, |
| string, |
| pos, endpos, |
| regs) |
| |
| def match(self, string, pos=0, endpos=None): |
| """match(string[, pos][, endpos]) -> MatchObject or None |
| |
| If zero or more characters at the beginning of string match |
| this regular expression, return a corresponding MatchObject |
| instance. Return None if the string does not match the |
| pattern; note that this is different from a zero-length match. |
| |
| Note: If you want to locate a match anywhere in string, use |
| search() instead. |
| |
| The optional second parameter pos gives an index in the string |
| where the search is to start; it defaults to 0. This is not |
| completely equivalent to slicing the string; the '' pattern |
| character matches at the real beginning of the string and at |
| positions just after a newline, but not necessarily at the |
| index where the search is to start. |
| |
| The optional parameter endpos limits how far the string will |
| be searched; it will be as if the string is endpos characters |
| long, so only the characters from pos to endpos will be |
| searched for a match. |
| |
| """ |
| if endpos is None or endpos>len(string): |
| endpos=len(string) |
| if endpos<pos: endpos=pos |
| regs = self.code.match(string, pos, endpos, ANCHORED) |
| if regs is None: |
| return None |
| self._num_regs=len(regs) |
| return MatchObject(self, |
| string, |
| pos, endpos, |
| regs) |
| |
| def sub(self, repl, string, count=0): |
| """sub(repl, string[, count=0]) -> string |
| |
| Return the string obtained by replacing the leftmost |
| non-overlapping occurrences of the compiled pattern in string |
| by the replacement repl. If the pattern isn't found, string is |
| returned unchanged. |
| |
| Identical to the sub() function, using the compiled pattern. |
| |
| """ |
| return self.subn(repl, string, count)[0] |
| |
| def subn(self, repl, source, count=0): |
| """subn(repl, string[, count=0]) -> tuple |
| |
| Perform the same operation as sub(), but return a tuple |
| (new_string, number_of_subs_made). |
| |
| """ |
| if count < 0: |
| raise error, "negative substitution count" |
| if count == 0: |
| count = sys.maxint |
| n = 0 # Number of matches |
| pos = 0 # Where to start searching |
| lastmatch = -1 # End of last match |
| results = [] # Substrings making up the result |
| end = len(source) |
| |
| if type(repl) is type(''): |
| # See if repl contains group references (if it does, |
| # pcre_expand will attempt to call _Dummy.group, which |
| # results in a TypeError) |
| try: |
| repl = pcre_expand(_Dummy, repl) |
| except (error, TypeError): |
| m = MatchObject(self, source, 0, end, []) |
| repl = lambda m, repl=repl, expand=pcre_expand: expand(m, repl) |
| else: |
| m = None |
| else: |
| m = MatchObject(self, source, 0, end, []) |
| |
| match = self.code.match |
| append = results.append |
| while n < count and pos <= end: |
| regs = match(source, pos, end, 0) |
| if not regs: |
| break |
| self._num_regs = len(regs) |
| i, j = regs[0] |
| if i == j == lastmatch: |
| # Empty match adjacent to previous match |
| pos = pos + 1 |
| append(source[lastmatch:pos]) |
| continue |
| if pos < i: |
| append(source[pos:i]) |
| if m: |
| m.pos = pos |
| m.regs = regs |
| append(repl(m)) |
| else: |
| append(repl) |
| pos = lastmatch = j |
| if i == j: |
| # Last match was empty; don't try here again |
| pos = pos + 1 |
| append(source[lastmatch:pos]) |
| n = n + 1 |
| append(source[pos:]) |
| return (''.join(results), n) |
| |
| def split(self, source, maxsplit=0): |
| """split(source[, maxsplit=0]) -> list of strings |
| |
| Split string by the occurrences of the compiled pattern. If |
| capturing parentheses are used in the pattern, then the text |
| of all groups in the pattern are also returned as part of the |
| resulting list. If maxsplit is nonzero, at most maxsplit |
| splits occur, and the remainder of the string is returned as |
| the final element of the list. |
| |
| """ |
| if maxsplit < 0: |
| raise error, "negative split count" |
| if maxsplit == 0: |
| maxsplit = sys.maxint |
| n = 0 |
| pos = 0 |
| lastmatch = 0 |
| results = [] |
| end = len(source) |
| match = self.code.match |
| append = results.append |
| while n < maxsplit: |
| regs = match(source, pos, end, 0) |
| if not regs: |
| break |
| i, j = regs[0] |
| if i == j: |
| # Empty match |
| if pos >= end: |
| break |
| pos = pos+1 |
| continue |
| append(source[lastmatch:i]) |
| rest = regs[1:] |
| if rest: |
| for a, b in rest: |
| if a == -1 or b == -1: |
| group = None |
| else: |
| group = source[a:b] |
| append(group) |
| pos = lastmatch = j |
| n = n + 1 |
| append(source[lastmatch:]) |
| return results |
| |
| def findall(self, source): |
| """findall(source) -> list |
| |
| Return a list of all non-overlapping matches of the compiled |
| pattern in string. If one or more groups are present in the |
| pattern, return a list of groups; this will be a list of |
| tuples if the pattern has more than one group. Empty matches |
| are included in the result. |
| |
| """ |
| pos = 0 |
| end = len(source) |
| results = [] |
| match = self.code.match |
| append = results.append |
| while pos <= end: |
| regs = match(source, pos, end, 0) |
| if not regs: |
| break |
| i, j = regs[0] |
| rest = regs[1:] |
| if not rest: |
| gr = source[i:j] |
| elif len(rest) == 1: |
| a, b = rest[0] |
| gr = source[a:b] |
| else: |
| gr = [] |
| for (a, b) in rest: |
| gr.append(source[a:b]) |
| gr = tuple(gr) |
| append(gr) |
| pos = max(j, pos+1) |
| return results |
| |
| # The following 3 functions were contributed by Mike Fletcher, and |
| # allow pickling and unpickling of RegexObject instances. |
| def __getinitargs__(self): |
| return (None,None,None,None) # any 4 elements, to work around |
| # problems with the |
| # pickle/cPickle modules not yet |
| # ignoring the __init__ function |
| def __getstate__(self): |
| return self.pattern, self.flags, self.groupindex |
| def __setstate__(self, statetuple): |
| self.pattern = statetuple[0] |
| self.flags = statetuple[1] |
| self.groupindex = statetuple[2] |
| self.code = pcre_compile(*statetuple) |
| |
| class _Dummy: |
| # Dummy class used by _subn_string(). Has 'group' to avoid core dump. |
| group = None |
| |
| class MatchObject: |
| """Holds a compiled regular expression pattern. |
| |
| Methods: |
| start Return the index of the start of a matched substring. |
| end Return the index of the end of a matched substring. |
| span Return a tuple of (start, end) of a matched substring. |
| groups Return a tuple of all the subgroups of the match. |
| group Return one or more subgroups of the match. |
| groupdict Return a dictionary of all the named subgroups of the match. |
| |
| """ |
| |
| def __init__(self, re, string, pos, endpos, regs): |
| self.re = re |
| self.string = string |
| self.pos = pos |
| self.endpos = endpos |
| self.regs = regs |
| |
| def start(self, g = 0): |
| """start([group=0]) -> int or None |
| |
| Return the index of the start of the substring matched by |
| group; group defaults to zero (meaning the whole matched |
| substring). Return -1 if group exists but did not contribute |
| to the match. |
| |
| """ |
| if type(g) == type(''): |
| try: |
| g = self.re.groupindex[g] |
| except (KeyError, TypeError): |
| raise IndexError, 'group %s is undefined' % `g` |
| return self.regs[g][0] |
| |
| def end(self, g = 0): |
| """end([group=0]) -> int or None |
| |
| Return the indices of the end of the substring matched by |
| group; group defaults to zero (meaning the whole matched |
| substring). Return -1 if group exists but did not contribute |
| to the match. |
| |
| """ |
| if type(g) == type(''): |
| try: |
| g = self.re.groupindex[g] |
| except (KeyError, TypeError): |
| raise IndexError, 'group %s is undefined' % `g` |
| return self.regs[g][1] |
| |
| def span(self, g = 0): |
| """span([group=0]) -> tuple |
| |
| Return the 2-tuple (m.start(group), m.end(group)). Note that |
| if group did not contribute to the match, this is (-1, |
| -1). Group defaults to zero (meaning the whole matched |
| substring). |
| |
| """ |
| if type(g) == type(''): |
| try: |
| g = self.re.groupindex[g] |
| except (KeyError, TypeError): |
| raise IndexError, 'group %s is undefined' % `g` |
| return self.regs[g] |
| |
| def groups(self, default=None): |
| """groups([default=None]) -> tuple |
| |
| Return a tuple containing all the subgroups of the match, from |
| 1 up to however many groups are in the pattern. The default |
| argument is used for groups that did not participate in the |
| match. |
| |
| """ |
| result = [] |
| for g in range(1, self.re._num_regs): |
| a, b = self.regs[g] |
| if a == -1 or b == -1: |
| result.append(default) |
| else: |
| result.append(self.string[a:b]) |
| return tuple(result) |
| |
| def group(self, *groups): |
| """group([group1, group2, ...]) -> string or tuple |
| |
| Return one or more subgroups of the match. If there is a |
| single argument, the result is a single string; if there are |
| multiple arguments, the result is a tuple with one item per |
| argument. Without arguments, group1 defaults to zero (i.e. the |
| whole match is returned). If a groupN argument is zero, the |
| corresponding return value is the entire matching string; if |
| it is in the inclusive range [1..99], it is the string |
| matching the corresponding parenthesized group. If a group |
| number is negative or larger than the number of groups defined |
| in the pattern, an IndexError exception is raised. If a group |
| is contained in a part of the pattern that did not match, the |
| corresponding result is None. If a group is contained in a |
| part of the pattern that matched multiple times, the last |
| match is returned. |
| |
| If the regular expression uses the (?P<name>...) syntax, the |
| groupN arguments may also be strings identifying groups by |
| their group name. If a string argument is not used as a group |
| name in the pattern, an IndexError exception is raised. |
| |
| """ |
| if len(groups) == 0: |
| groups = (0,) |
| result = [] |
| for g in groups: |
| if type(g) == type(''): |
| try: |
| g = self.re.groupindex[g] |
| except (KeyError, TypeError): |
| raise IndexError, 'group %s is undefined' % `g` |
| if g >= len(self.regs): |
| raise IndexError, 'group %s is undefined' % `g` |
| a, b = self.regs[g] |
| if a == -1 or b == -1: |
| result.append(None) |
| else: |
| result.append(self.string[a:b]) |
| if len(result) > 1: |
| return tuple(result) |
| elif len(result) == 1: |
| return result[0] |
| else: |
| return () |
| |
| def groupdict(self, default=None): |
| """groupdict([default=None]) -> dictionary |
| |
| Return a dictionary containing all the named subgroups of the |
| match, keyed by the subgroup name. The default argument is |
| used for groups that did not participate in the match. |
| |
| """ |
| dict = {} |
| for name, index in self.re.groupindex.items(): |
| a, b = self.regs[index] |
| if a == -1 or b == -1: |
| dict[name] = default |
| else: |
| dict[name] = self.string[a:b] |
| return dict |