- Issue #29169: Update zlib to 1.2.11.
diff --git a/Modules/zlib/README b/Modules/zlib/README
index e2250bd..51106de 100644
--- a/Modules/zlib/README
+++ b/Modules/zlib/README
@@ -1,6 +1,6 @@
ZLIB DATA COMPRESSION LIBRARY
-zlib 1.2.10 is a general purpose data compression library. All the code is
+zlib 1.2.11 is a general purpose data compression library. All the code is
thread safe. The data format used by the zlib library is described by RFCs
(Request for Comments) 1950 to 1952 in the files
http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
@@ -31,7 +31,7 @@
issue of Dr. Dobb's Journal; a copy of the article is available at
http://marknelson.us/1997/01/01/zlib-engine/ .
-The changes made in version 1.2.10 are documented in the file ChangeLog.
+The changes made in version 1.2.11 are documented in the file ChangeLog.
Unsupported third party contributions are provided in directory contrib/ .
diff --git a/Modules/zlib/deflate.c b/Modules/zlib/deflate.c
index 2ad890e..1ec7614 100644
--- a/Modules/zlib/deflate.c
+++ b/Modules/zlib/deflate.c
@@ -52,7 +52,7 @@
#include "deflate.h"
const char deflate_copyright[] =
- " deflate 1.2.10 Copyright 1995-2017 Jean-loup Gailly and Mark Adler ";
+ " deflate 1.2.11 Copyright 1995-2017 Jean-loup Gailly and Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
@@ -586,7 +586,8 @@
}
func = configuration_table[s->level].func;
- if ((strategy != s->strategy || func != configuration_table[level].func)) {
+ if ((strategy != s->strategy || func != configuration_table[level].func) &&
+ s->high_water) {
/* Flush the last buffer: */
int err = deflate(strm, Z_BLOCK);
if (err == Z_STREAM_ERROR)
@@ -1671,8 +1672,6 @@
len = left + s->strm->avail_in; /* limit len to the input */
if (len > have)
len = have; /* limit len to the output */
- if (left > len)
- left = len; /* limit window pull to len */
/* If the stored block would be less than min_block in length, or if
* unable to copy all of the available input when flushing, then try
@@ -1681,13 +1680,13 @@
*/
if (len < min_block && ((len == 0 && flush != Z_FINISH) ||
flush == Z_NO_FLUSH ||
- len - left != s->strm->avail_in))
+ len != left + s->strm->avail_in))
break;
/* Make a dummy stored block in pending to get the header bytes,
* including any pending bits. This also updates the debugging counts.
*/
- last = flush == Z_FINISH && len - left == s->strm->avail_in ? 1 : 0;
+ last = flush == Z_FINISH && len == left + s->strm->avail_in ? 1 : 0;
_tr_stored_block(s, (char *)0, 0L, last);
/* Replace the lengths in the dummy stored block with len. */
@@ -1699,14 +1698,16 @@
/* Write the stored block header bytes. */
flush_pending(s->strm);
- /* Update debugging counts for the data about to be copied. */
#ifdef ZLIB_DEBUG
+ /* Update debugging counts for the data about to be copied. */
s->compressed_len += len << 3;
s->bits_sent += len << 3;
#endif
/* Copy uncompressed bytes from the window to next_out. */
if (left) {
+ if (left > len)
+ left = len;
zmemcpy(s->strm->next_out, s->window + s->block_start, left);
s->strm->next_out += left;
s->strm->avail_out -= left;
@@ -1756,6 +1757,8 @@
s->block_start = s->strstart;
s->insert += MIN(used, s->w_size - s->insert);
}
+ if (s->high_water < s->strstart)
+ s->high_water = s->strstart;
/* If the last block was written to next_out, then done. */
if (last)
@@ -1783,6 +1786,8 @@
read_buf(s->strm, s->window + s->strstart, have);
s->strstart += have;
}
+ if (s->high_water < s->strstart)
+ s->high_water = s->strstart;
/* There was not enough avail_out to write a complete worthy or flushed
* stored block to next_out. Write a stored block to pending instead, if we
diff --git a/Modules/zlib/gzlib.c b/Modules/zlib/gzlib.c
index e142ffb..4105e6a 100644
--- a/Modules/zlib/gzlib.c
+++ b/Modules/zlib/gzlib.c
@@ -1,5 +1,5 @@
/* gzlib.c -- zlib functions common to reading and writing gzip files
- * Copyright (C) 2004, 2010, 2011, 2012, 2013, 2016 Mark Adler
+ * Copyright (C) 2004-2017 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
diff --git a/Modules/zlib/gzwrite.c b/Modules/zlib/gzwrite.c
index 1ec1da4..c7b5651 100644
--- a/Modules/zlib/gzwrite.c
+++ b/Modules/zlib/gzwrite.c
@@ -1,5 +1,5 @@
/* gzwrite.c -- zlib functions for writing gzip files
- * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013, 2016 Mark Adler
+ * Copyright (C) 2004-2017 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
diff --git a/Modules/zlib/inffast.c b/Modules/zlib/inffast.c
index 29eb7d8..0dbd1db 100644
--- a/Modules/zlib/inffast.c
+++ b/Modules/zlib/inffast.c
@@ -1,5 +1,5 @@
/* inffast.c -- fast decoding
- * Copyright (C) 1995-2008, 2010, 2013, 2016 Mark Adler
+ * Copyright (C) 1995-2017 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
diff --git a/Modules/zlib/inftrees.c b/Modules/zlib/inftrees.c
index 8a904dd..2ea08fc 100644
--- a/Modules/zlib/inftrees.c
+++ b/Modules/zlib/inftrees.c
@@ -9,7 +9,7 @@
#define MAXBITS 15
const char inflate_copyright[] =
- " inflate 1.2.10 Copyright 1995-2017 Mark Adler ";
+ " inflate 1.2.11 Copyright 1995-2017 Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
@@ -62,7 +62,7 @@
35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
static const unsigned short lext[31] = { /* Length codes 257..285 extra */
16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
- 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 192, 202};
+ 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 77, 202};
static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
diff --git a/Modules/zlib/trees.c b/Modules/zlib/trees.c
index 357f313..50cf4b4 100644
--- a/Modules/zlib/trees.c
+++ b/Modules/zlib/trees.c
@@ -1,5 +1,5 @@
/* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995-2016 Jean-loup Gailly
+ * Copyright (C) 1995-2017 Jean-loup Gailly
* detect_data_type() function provided freely by Cosmin Truta, 2006
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -906,7 +906,7 @@
/* ===========================================================================
* Determine the best encoding for the current block: dynamic trees, static
- * trees or store, and output the encoded block to the zip file.
+ * trees or store, and write out the encoded block.
*/
void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last)
deflate_state *s;
diff --git a/Modules/zlib/zlib.3 b/Modules/zlib/zlib.3
index 00dc061..bda4eb0 100644
--- a/Modules/zlib/zlib.3
+++ b/Modules/zlib/zlib.3
@@ -1,4 +1,4 @@
-.TH ZLIB 3 "2 Jan 2017"
+.TH ZLIB 3 "15 Jan 2017"
.SH NAME
zlib \- compression/decompression library
.SH SYNOPSIS
@@ -105,7 +105,7 @@
Send questions and/or comments to zlib@gzip.org,
or (for the Windows DLL version) to Gilles Vollant (info@winimage.com).
.SH AUTHORS AND LICENSE
-Version 1.2.10
+Version 1.2.11
.LP
Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
.LP
diff --git a/Modules/zlib/zlib.h b/Modules/zlib/zlib.h
index dc90dc8..f09cdaf 100644
--- a/Modules/zlib/zlib.h
+++ b/Modules/zlib/zlib.h
@@ -1,5 +1,5 @@
/* zlib.h -- interface of the 'zlib' general purpose compression library
- version 1.2.10, January 2nd, 2017
+ version 1.2.11, January 15th, 2017
Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
@@ -37,11 +37,11 @@
extern "C" {
#endif
-#define ZLIB_VERSION "1.2.10"
-#define ZLIB_VERNUM 0x12a0
+#define ZLIB_VERSION "1.2.11"
+#define ZLIB_VERNUM 0x12b0
#define ZLIB_VER_MAJOR 1
#define ZLIB_VER_MINOR 2
-#define ZLIB_VER_REVISION 10
+#define ZLIB_VER_REVISION 11
#define ZLIB_VER_SUBREVISION 0
/*
@@ -712,10 +712,11 @@
used to switch between compression and straight copy of the input data, or
to switch to a different kind of input data requiring a different strategy.
If the compression approach (which is a function of the level) or the
- strategy is changed, then the input available so far is compressed with the
- old level and strategy using deflate(strm, Z_BLOCK). There are three
- approaches for the compression levels 0, 1..3, and 4..9 respectively. The
- new level and strategy will take effect at the next call of deflate().
+ strategy is changed, and if any input has been consumed in a previous
+ deflate() call, then the input available so far is compressed with the old
+ level and strategy using deflate(strm, Z_BLOCK). There are three approaches
+ for the compression levels 0, 1..3, and 4..9 respectively. The new level
+ and strategy will take effect at the next call of deflate().
If a deflate(strm, Z_BLOCK) is performed by deflateParams(), and it does
not have enough output space to complete, then the parameter change will not
diff --git a/Modules/zlib/zutil.c b/Modules/zlib/zutil.c
index 56534fb..a76c6b0 100644
--- a/Modules/zlib/zutil.c
+++ b/Modules/zlib/zutil.c
@@ -1,5 +1,5 @@
/* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-2005, 2010, 2011, 2012, 2016 Jean-loup Gailly
+ * Copyright (C) 1995-2017 Jean-loup Gailly
* For conditions of distribution and use, see copyright notice in zlib.h
*/