diff --git a/Doc/c-api/allocation.rst b/Doc/c-api/allocation.rst
index cb43cbf..32a414b 100644
--- a/Doc/c-api/allocation.rst
+++ b/Doc/c-api/allocation.rst
@@ -43,7 +43,7 @@
    Allocate a new Python object using the C structure type *TYPE* and the
    Python type object *type*.  Fields not defined by the Python object header
    are not initialized; the object's reference count will be one.  The size of
-   the memory allocation is determined from the :attr:`tp_basicsize` field of
+   the memory allocation is determined from the :c:member:`~PyTypeObject.tp_basicsize` field of
    the type object.
 
 
@@ -52,7 +52,7 @@
    Allocate a new Python object using the C structure type *TYPE* and the
    Python type object *type*.  Fields not defined by the Python object header
    are not initialized.  The allocated memory allows for the *TYPE* structure
-   plus *size* fields of the size given by the :attr:`tp_itemsize` field of
+   plus *size* fields of the size given by the :c:member:`~PyTypeObject.tp_itemsize` field of
    *type*.  This is useful for implementing objects like tuples, which are
    able to determine their size at construction time.  Embedding the array of
    fields into the same allocation decreases the number of allocations,
@@ -67,7 +67,7 @@
 
    Releases memory allocated to an object using :c:func:`PyObject_New` or
    :c:func:`PyObject_NewVar`.  This is normally called from the
-   :attr:`tp_dealloc` handler specified in the object's type.  The fields of
+   :c:member:`~PyTypeObject.tp_dealloc` handler specified in the object's type.  The fields of
    the object should not be accessed after this call as the memory is no
    longer a valid Python object.
 
diff --git a/Doc/c-api/gcsupport.rst b/Doc/c-api/gcsupport.rst
index 2a4fda4..b0a2d5c 100644
--- a/Doc/c-api/gcsupport.rst
+++ b/Doc/c-api/gcsupport.rst
@@ -15,10 +15,10 @@
 .. An example showing the use of these interfaces can be found in "Supporting the
 .. Cycle Collector (XXX not found: ../ext/example-cycle-support.html)".
 
-To create a container type, the :attr:`tp_flags` field of the type object must
+To create a container type, the :c:member:`~PyTypeObject.tp_flags` field of the type object must
 include the :const:`Py_TPFLAGS_HAVE_GC` and provide an implementation of the
-:attr:`tp_traverse` handler.  If instances of the type are mutable, a
-:attr:`tp_clear` implementation must also be provided.
+:c:member:`~PyTypeObject.tp_traverse` handler.  If instances of the type are mutable, a
+:c:member:`~PyTypeObject.tp_clear` implementation must also be provided.
 
 
 .. data:: Py_TPFLAGS_HAVE_GC
@@ -68,7 +68,7 @@
    Adds the object *op* to the set of container objects tracked by the
    collector.  The collector can run at unexpected times so objects must be
    valid while being tracked.  This should be called once all the fields
-   followed by the :attr:`tp_traverse` handler become valid, usually near the
+   followed by the :c:member:`~PyTypeObject.tp_traverse` handler become valid, usually near the
    end of the constructor.
 
 
@@ -97,8 +97,8 @@
    Remove the object *op* from the set of container objects tracked by the
    collector.  Note that :c:func:`PyObject_GC_Track` can be called again on
    this object to add it back to the set of tracked objects.  The deallocator
-   (:attr:`tp_dealloc` handler) should call this for the object before any of
-   the fields used by the :attr:`tp_traverse` handler become invalid.
+   (:c:member:`~PyTypeObject.tp_dealloc` handler) should call this for the object before any of
+   the fields used by the :c:member:`~PyTypeObject.tp_traverse` handler become invalid.
 
 
 .. c:function:: void _PyObject_GC_UNTRACK(PyObject *op)
@@ -106,19 +106,19 @@
    A macro version of :c:func:`PyObject_GC_UnTrack`.  It should not be used for
    extension modules.
 
-The :attr:`tp_traverse` handler accepts a function parameter of this type:
+The :c:member:`~PyTypeObject.tp_traverse` handler accepts a function parameter of this type:
 
 
 .. c:type:: int (*visitproc)(PyObject *object, void *arg)
 
-   Type of the visitor function passed to the :attr:`tp_traverse` handler.
+   Type of the visitor function passed to the :c:member:`~PyTypeObject.tp_traverse` handler.
    The function should be called with an object to traverse as *object* and
-   the third parameter to the :attr:`tp_traverse` handler as *arg*.  The
+   the third parameter to the :c:member:`~PyTypeObject.tp_traverse` handler as *arg*.  The
    Python core uses several visitor functions to implement cyclic garbage
    detection; it's not expected that users will need to write their own
    visitor functions.
 
-The :attr:`tp_traverse` handler must have the following type:
+The :c:member:`~PyTypeObject.tp_traverse` handler must have the following type:
 
 
 .. c:type:: int (*traverseproc)(PyObject *self, visitproc visit, void *arg)
@@ -130,15 +130,15 @@
    object argument.  If *visit* returns a non-zero value that value should be
    returned immediately.
 
-To simplify writing :attr:`tp_traverse` handlers, a :c:func:`Py_VISIT` macro is
-provided.  In order to use this macro, the :attr:`tp_traverse` implementation
+To simplify writing :c:member:`~PyTypeObject.tp_traverse` handlers, a :c:func:`Py_VISIT` macro is
+provided.  In order to use this macro, the :c:member:`~PyTypeObject.tp_traverse` implementation
 must name its arguments exactly *visit* and *arg*:
 
 
 .. c:function:: void Py_VISIT(PyObject *o)
 
    Call the *visit* callback, with arguments *o* and *arg*. If *visit* returns
-   a non-zero value, then return it.  Using this macro, :attr:`tp_traverse`
+   a non-zero value, then return it.  Using this macro, :c:member:`~PyTypeObject.tp_traverse`
    handlers look like::
 
       static int
@@ -151,7 +151,7 @@
 
    .. versionadded:: 2.4
 
-The :attr:`tp_clear` handler must be of the :c:type:`inquiry` type, or *NULL*
+The :c:member:`~PyTypeObject.tp_clear` handler must be of the :c:type:`inquiry` type, or *NULL*
 if the object is immutable.
 
 
diff --git a/Doc/c-api/structures.rst b/Doc/c-api/structures.rst
index f5007ac..e31687f 100644
--- a/Doc/c-api/structures.rst
+++ b/Doc/c-api/structures.rst
@@ -293,6 +293,6 @@
 .. c:function:: PyObject* Py_FindMethod(PyMethodDef table[], PyObject *ob, char *name)
 
    Return a bound method object for an extension type implemented in C.  This
-   can be useful in the implementation of a :attr:`tp_getattro` or
-   :attr:`tp_getattr` handler that does not use the
+   can be useful in the implementation of a :c:member:`~PyTypeObject.tp_getattro` or
+   :c:member:`~PyTypeObject.tp_getattr` handler that does not use the
    :c:func:`PyObject_GenericGetAttr` function.
diff --git a/Doc/c-api/typeobj.rst b/Doc/c-api/typeobj.rst
index 7c37786..c35f727 100644
--- a/Doc/c-api/typeobj.rst
+++ b/Doc/c-api/typeobj.rst
@@ -35,7 +35,7 @@
 The type object structure extends the :c:type:`PyVarObject` structure. The
 :attr:`ob_size` field is used for dynamic types (created by  :func:`type_new`,
 usually called from a class statement). Note that :c:data:`PyType_Type` (the
-metatype) initializes :attr:`tp_itemsize`, which means that its instances (i.e.
+metatype) initializes :c:member:`~PyTypeObject.tp_itemsize`, which means that its instances (i.e.
 type objects) *must* have the :attr:`ob_size` field.
 
 
@@ -108,7 +108,7 @@
    should be just the type name.  If the module is a submodule of a package, the
    full package name is part of the full module name.  For example, a type named
    :class:`T` defined in module :mod:`M` in subpackage :mod:`Q` in package :mod:`P`
-   should have the :attr:`tp_name` initializer ``"P.Q.M.T"``.
+   should have the :c:member:`~PyTypeObject.tp_name` initializer ``"P.Q.M.T"``.
 
    For dynamically allocated type objects, this should just be the type name, and
    the module name explicitly stored in the type dict as the value for key
@@ -119,7 +119,7 @@
    attribute, and everything after the last dot is made accessible as the
    :attr:`__name__` attribute.
 
-   If no dot is present, the entire :attr:`tp_name` field is made accessible as the
+   If no dot is present, the entire :c:member:`~PyTypeObject.tp_name` field is made accessible as the
    :attr:`__name__` attribute, and the :attr:`__module__` attribute is undefined
    (unless explicitly set in the dictionary, as explained above).  This means your
    type will be impossible to pickle.
@@ -133,13 +133,13 @@
    These fields allow calculating the size in bytes of instances of the type.
 
    There are two kinds of types: types with fixed-length instances have a zero
-   :attr:`tp_itemsize` field, types with variable-length instances have a non-zero
-   :attr:`tp_itemsize` field.  For a type with fixed-length instances, all
-   instances have the same size, given in :attr:`tp_basicsize`.
+   :c:member:`~PyTypeObject.tp_itemsize` field, types with variable-length instances have a non-zero
+   :c:member:`~PyTypeObject.tp_itemsize` field.  For a type with fixed-length instances, all
+   instances have the same size, given in :c:member:`~PyTypeObject.tp_basicsize`.
 
    For a type with variable-length instances, the instances must have an
-   :attr:`ob_size` field, and the instance size is :attr:`tp_basicsize` plus N
-   times :attr:`tp_itemsize`, where N is the "length" of the object.  The value of
+   :attr:`ob_size` field, and the instance size is :c:member:`~PyTypeObject.tp_basicsize` plus N
+   times :c:member:`~PyTypeObject.tp_itemsize`, where N is the "length" of the object.  The value of
    N is typically stored in the instance's :attr:`ob_size` field.  There are
    exceptions:  for example, long ints use a negative :attr:`ob_size` to indicate a
    negative number, and N is ``abs(ob_size)`` there.  Also, the presence of an
@@ -152,21 +152,21 @@
    :c:macro:`PyObject_HEAD` or :c:macro:`PyObject_VAR_HEAD` (whichever is used to
    declare the instance struct) and this in turn includes the :attr:`_ob_prev` and
    :attr:`_ob_next` fields if they are present.  This means that the only correct
-   way to get an initializer for the :attr:`tp_basicsize` is to use the
+   way to get an initializer for the :c:member:`~PyTypeObject.tp_basicsize` is to use the
    ``sizeof`` operator on the struct used to declare the instance layout.
    The basic size does not include the GC header size (this is new in Python 2.2;
-   in 2.1 and 2.0, the GC header size was included in :attr:`tp_basicsize`).
+   in 2.1 and 2.0, the GC header size was included in :c:member:`~PyTypeObject.tp_basicsize`).
 
    These fields are inherited separately by subtypes.  If the base type has a
-   non-zero :attr:`tp_itemsize`, it is generally not safe to set
-   :attr:`tp_itemsize` to a different non-zero value in a subtype (though this
+   non-zero :c:member:`~PyTypeObject.tp_itemsize`, it is generally not safe to set
+   :c:member:`~PyTypeObject.tp_itemsize` to a different non-zero value in a subtype (though this
    depends on the implementation of the base type).
 
    A note about alignment: if the variable items require a particular alignment,
-   this should be taken care of by the value of :attr:`tp_basicsize`.  Example:
-   suppose a type implements an array of ``double``. :attr:`tp_itemsize` is
+   this should be taken care of by the value of :c:member:`~PyTypeObject.tp_basicsize`.  Example:
+   suppose a type implements an array of ``double``. :c:member:`~PyTypeObject.tp_itemsize` is
    ``sizeof(double)``. It is the programmer's responsibility that
-   :attr:`tp_basicsize` is a multiple of ``sizeof(double)`` (assuming this is the
+   :c:member:`~PyTypeObject.tp_basicsize` is a multiple of ``sizeof(double)`` (assuming this is the
    alignment requirement for ``double``).
 
 
@@ -182,10 +182,10 @@
    destructor function should free all references which the instance owns, free all
    memory buffers owned by the instance (using the freeing function corresponding
    to the allocation function used to allocate the buffer), and finally (as its
-   last action) call the type's :attr:`tp_free` function.  If the type is not
+   last action) call the type's :c:member:`~PyTypeObject.tp_free` function.  If the type is not
    subtypable (doesn't have the :const:`Py_TPFLAGS_BASETYPE` flag bit set), it is
    permissible to call the object deallocator directly instead of via
-   :attr:`tp_free`.  The object deallocator should be the one used to allocate the
+   :c:member:`~PyTypeObject.tp_free`.  The object deallocator should be the one used to allocate the
    instance; this is normally :c:func:`PyObject_Del` if the instance was allocated
    using :c:func:`PyObject_New` or :c:func:`PyObject_VarNew`, or
    :c:func:`PyObject_GC_Del` if the instance was allocated using
@@ -200,25 +200,25 @@
 
    The print function is only called when the instance is printed to a *real* file;
    when it is printed to a pseudo-file (like a :class:`StringIO` instance), the
-   instance's :attr:`tp_repr` or :attr:`tp_str` function is called to convert it to
-   a string.  These are also called when the type's :attr:`tp_print` field is
-   *NULL*.  A type should never implement :attr:`tp_print` in a way that produces
-   different output than :attr:`tp_repr` or :attr:`tp_str` would.
+   instance's :c:member:`~PyTypeObject.tp_repr` or :c:member:`~PyTypeObject.tp_str` function is called to convert it to
+   a string.  These are also called when the type's :c:member:`~PyTypeObject.tp_print` field is
+   *NULL*.  A type should never implement :c:member:`~PyTypeObject.tp_print` in a way that produces
+   different output than :c:member:`~PyTypeObject.tp_repr` or :c:member:`~PyTypeObject.tp_str` would.
 
    The print function is called with the same signature as :c:func:`PyObject_Print`:
    ``int tp_print(PyObject *self, FILE *file, int flags)``.  The *self* argument is
    the instance to be printed.  The *file* argument is the stdio file to which it
    is to be printed.  The *flags* argument is composed of flag bits. The only flag
    bit currently defined is :const:`Py_PRINT_RAW`. When the :const:`Py_PRINT_RAW`
-   flag bit is set, the instance should be printed the same way as :attr:`tp_str`
+   flag bit is set, the instance should be printed the same way as :c:member:`~PyTypeObject.tp_str`
    would format it; when the :const:`Py_PRINT_RAW` flag bit is clear, the instance
-   should be printed the same was as :attr:`tp_repr` would format it. It should
+   should be printed the same was as :c:member:`~PyTypeObject.tp_repr` would format it. It should
    return ``-1`` and set an exception condition when an error occurred during the
    comparison.
 
-   It is possible that the :attr:`tp_print` field will be deprecated. In any case,
-   it is recommended not to define :attr:`tp_print`, but instead to rely on
-   :attr:`tp_repr` and :attr:`tp_str` for printing.
+   It is possible that the :c:member:`~PyTypeObject.tp_print` field will be deprecated. In any case,
+   it is recommended not to define :c:member:`~PyTypeObject.tp_print`, but instead to rely on
+   :c:member:`~PyTypeObject.tp_repr` and :c:member:`~PyTypeObject.tp_str` for printing.
 
    This field is inherited by subtypes.
 
@@ -228,13 +228,13 @@
    An optional pointer to the get-attribute-string function.
 
    This field is deprecated.  When it is defined, it should point to a function
-   that acts the same as the :attr:`tp_getattro` function, but taking a C string
+   that acts the same as the :c:member:`~PyTypeObject.tp_getattro` function, but taking a C string
    instead of a Python string object to give the attribute name.  The signature is
    the same as for :c:func:`PyObject_GetAttrString`.
 
-   This field is inherited by subtypes together with :attr:`tp_getattro`: a subtype
-   inherits both :attr:`tp_getattr` and :attr:`tp_getattro` from its base type when
-   the subtype's :attr:`tp_getattr` and :attr:`tp_getattro` are both *NULL*.
+   This field is inherited by subtypes together with :c:member:`~PyTypeObject.tp_getattro`: a subtype
+   inherits both :c:member:`~PyTypeObject.tp_getattr` and :c:member:`~PyTypeObject.tp_getattro` from its base type when
+   the subtype's :c:member:`~PyTypeObject.tp_getattr` and :c:member:`~PyTypeObject.tp_getattro` are both *NULL*.
 
 
 .. c:member:: setattrfunc PyTypeObject.tp_setattr
@@ -242,13 +242,13 @@
    An optional pointer to the set-attribute-string function.
 
    This field is deprecated.  When it is defined, it should point to a function
-   that acts the same as the :attr:`tp_setattro` function, but taking a C string
+   that acts the same as the :c:member:`~PyTypeObject.tp_setattro` function, but taking a C string
    instead of a Python string object to give the attribute name.  The signature is
    the same as for :c:func:`PyObject_SetAttrString`.
 
-   This field is inherited by subtypes together with :attr:`tp_setattro`: a subtype
-   inherits both :attr:`tp_setattr` and :attr:`tp_setattro` from its base type when
-   the subtype's :attr:`tp_setattr` and :attr:`tp_setattro` are both *NULL*.
+   This field is inherited by subtypes together with :c:member:`~PyTypeObject.tp_setattro`: a subtype
+   inherits both :c:member:`~PyTypeObject.tp_setattr` and :c:member:`~PyTypeObject.tp_setattro` from its base type when
+   the subtype's :c:member:`~PyTypeObject.tp_setattr` and :c:member:`~PyTypeObject.tp_setattro` are both *NULL*.
 
 
 .. c:member:: cmpfunc PyTypeObject.tp_compare
@@ -260,10 +260,10 @@
    *other*, and ``-1`` if *self* less than *other*.  It should return ``-1`` and
    set an exception condition when an error occurred during the comparison.
 
-   This field is inherited by subtypes together with :attr:`tp_richcompare` and
-   :attr:`tp_hash`: a subtypes inherits all three of :attr:`tp_compare`,
-   :attr:`tp_richcompare`, and :attr:`tp_hash` when the subtype's
-   :attr:`tp_compare`, :attr:`tp_richcompare`, and :attr:`tp_hash` are all *NULL*.
+   This field is inherited by subtypes together with :c:member:`~PyTypeObject.tp_richcompare` and
+   :c:member:`~PyTypeObject.tp_hash`: a subtypes inherits all three of :c:member:`~PyTypeObject.tp_compare`,
+   :c:member:`~PyTypeObject.tp_richcompare`, and :c:member:`~PyTypeObject.tp_hash` when the subtype's
+   :c:member:`~PyTypeObject.tp_compare`, :c:member:`~PyTypeObject.tp_richcompare`, and :c:member:`~PyTypeObject.tp_hash` are all *NULL*.
 
 
 .. c:member:: reprfunc PyTypeObject.tp_repr
@@ -292,7 +292,7 @@
    objects which implement the number protocol.  These fields are documented in
    :ref:`number-structs`.
 
-   The :attr:`tp_as_number` field is not inherited, but the contained fields are
+   The :c:member:`~PyTypeObject.tp_as_number` field is not inherited, but the contained fields are
    inherited individually.
 
 
@@ -302,7 +302,7 @@
    objects which implement the sequence protocol.  These fields are documented
    in :ref:`sequence-structs`.
 
-   The :attr:`tp_as_sequence` field is not inherited, but the contained fields
+   The :c:member:`~PyTypeObject.tp_as_sequence` field is not inherited, but the contained fields
    are inherited individually.
 
 
@@ -312,7 +312,7 @@
    objects which implement the mapping protocol.  These fields are documented in
    :ref:`mapping-structs`.
 
-   The :attr:`tp_as_mapping` field is not inherited, but the contained fields
+   The :c:member:`~PyTypeObject.tp_as_mapping` field is not inherited, but the contained fields
    are inherited individually.
 
 
@@ -336,14 +336,14 @@
    the Python level will result in the ``tp_hash`` slot being set to
    :c:func:`PyObject_HashNotImplemented`.
 
-   When this field is not set, two possibilities exist: if the :attr:`tp_compare`
-   and :attr:`tp_richcompare` fields are both *NULL*, a default hash value based on
+   When this field is not set, two possibilities exist: if the :c:member:`~PyTypeObject.tp_compare`
+   and :c:member:`~PyTypeObject.tp_richcompare` fields are both *NULL*, a default hash value based on
    the object's address is returned; otherwise, a :exc:`TypeError` is raised.
 
-   This field is inherited by subtypes together with :attr:`tp_richcompare` and
-   :attr:`tp_compare`: a subtypes inherits all three of :attr:`tp_compare`,
-   :attr:`tp_richcompare`, and :attr:`tp_hash`, when the subtype's
-   :attr:`tp_compare`, :attr:`tp_richcompare` and :attr:`tp_hash` are all *NULL*.
+   This field is inherited by subtypes together with :c:member:`~PyTypeObject.tp_richcompare` and
+   :c:member:`~PyTypeObject.tp_compare`: a subtypes inherits all three of :c:member:`~PyTypeObject.tp_compare`,
+   :c:member:`~PyTypeObject.tp_richcompare`, and :c:member:`~PyTypeObject.tp_hash`, when the subtype's
+   :c:member:`~PyTypeObject.tp_compare`, :c:member:`~PyTypeObject.tp_richcompare` and :c:member:`~PyTypeObject.tp_hash` are all *NULL*.
 
 
 .. c:member:: ternaryfunc PyTypeObject.tp_call
@@ -381,9 +381,9 @@
    convenient to set this field to :c:func:`PyObject_GenericGetAttr`, which
    implements the normal way of looking for object attributes.
 
-   This field is inherited by subtypes together with :attr:`tp_getattr`: a subtype
-   inherits both :attr:`tp_getattr` and :attr:`tp_getattro` from its base type when
-   the subtype's :attr:`tp_getattr` and :attr:`tp_getattro` are both *NULL*.
+   This field is inherited by subtypes together with :c:member:`~PyTypeObject.tp_getattr`: a subtype
+   inherits both :c:member:`~PyTypeObject.tp_getattr` and :c:member:`~PyTypeObject.tp_getattro` from its base type when
+   the subtype's :c:member:`~PyTypeObject.tp_getattr` and :c:member:`~PyTypeObject.tp_getattro` are both *NULL*.
 
 
 .. c:member:: setattrofunc PyTypeObject.tp_setattro
@@ -394,9 +394,9 @@
    convenient to set this field to :c:func:`PyObject_GenericSetAttr`, which
    implements the normal way of setting object attributes.
 
-   This field is inherited by subtypes together with :attr:`tp_setattr`: a subtype
-   inherits both :attr:`tp_setattr` and :attr:`tp_setattro` from its base type when
-   the subtype's :attr:`tp_setattr` and :attr:`tp_setattro` are both *NULL*.
+   This field is inherited by subtypes together with :c:member:`~PyTypeObject.tp_setattr`: a subtype
+   inherits both :c:member:`~PyTypeObject.tp_setattr` and :c:member:`~PyTypeObject.tp_setattro` from its base type when
+   the subtype's :c:member:`~PyTypeObject.tp_setattr` and :c:member:`~PyTypeObject.tp_setattro` are both *NULL*.
 
 
 .. c:member:: PyBufferProcs* PyTypeObject.tp_as_buffer
@@ -405,7 +405,7 @@
    which implement the buffer interface.  These fields are documented in
    :ref:`buffer-structs`.
 
-   The :attr:`tp_as_buffer` field is not inherited, but the contained fields are
+   The :c:member:`~PyTypeObject.tp_as_buffer` field is not inherited, but the contained fields are
    inherited individually.
 
 
@@ -414,8 +414,8 @@
    This field is a bit mask of various flags.  Some flags indicate variant
    semantics for certain situations; others are used to indicate that certain
    fields in the type object (or in the extension structures referenced via
-   :attr:`tp_as_number`, :attr:`tp_as_sequence`, :attr:`tp_as_mapping`, and
-   :attr:`tp_as_buffer`) that were historically not always present are valid; if
+   :c:member:`~PyTypeObject.tp_as_number`, :c:member:`~PyTypeObject.tp_as_sequence`, :c:member:`~PyTypeObject.tp_as_mapping`, and
+   :c:member:`~PyTypeObject.tp_as_buffer`) that were historically not always present are valid; if
    such a flag bit is clear, the type fields it guards must not be accessed and
    must be considered to have a zero or *NULL* value instead.
 
@@ -425,14 +425,14 @@
    inherited if the extension structure is inherited, i.e. the base type's value of
    the flag bit is copied into the subtype together with a pointer to the extension
    structure.  The :const:`Py_TPFLAGS_HAVE_GC` flag bit is inherited together with
-   the :attr:`tp_traverse` and :attr:`tp_clear` fields, i.e. if the
+   the :c:member:`~PyTypeObject.tp_traverse` and :c:member:`~PyTypeObject.tp_clear` fields, i.e. if the
    :const:`Py_TPFLAGS_HAVE_GC` flag bit is clear in the subtype and the
-   :attr:`tp_traverse` and :attr:`tp_clear` fields in the subtype exist (as
+   :c:member:`~PyTypeObject.tp_traverse` and :c:member:`~PyTypeObject.tp_clear` fields in the subtype exist (as
    indicated by the :const:`Py_TPFLAGS_HAVE_RICHCOMPARE` flag bit) and have *NULL*
    values.
 
    The following bit masks are currently defined; these can be ORed together using
-   the ``|`` operator to form the value of the :attr:`tp_flags` field.  The macro
+   the ``|`` operator to form the value of the :c:member:`~PyTypeObject.tp_flags` field.  The macro
    :c:func:`PyType_HasFeature` takes a type and a flags value, *tp* and *f*, and
    checks whether ``tp->tp_flags & f`` is non-zero.
 
@@ -440,13 +440,13 @@
    .. data:: Py_TPFLAGS_HAVE_GETCHARBUFFER
 
       If this bit is set, the :c:type:`PyBufferProcs` struct referenced by
-      :attr:`tp_as_buffer` has the :attr:`bf_getcharbuffer` field.
+      :c:member:`~PyTypeObject.tp_as_buffer` has the :attr:`bf_getcharbuffer` field.
 
 
    .. data:: Py_TPFLAGS_HAVE_SEQUENCE_IN
 
       If this bit is set, the :c:type:`PySequenceMethods` struct referenced by
-      :attr:`tp_as_sequence` has the :attr:`sq_contains` field.
+      :c:member:`~PyTypeObject.tp_as_sequence` has the :attr:`sq_contains` field.
 
 
    .. data:: Py_TPFLAGS_GC
@@ -458,8 +458,8 @@
    .. data:: Py_TPFLAGS_HAVE_INPLACEOPS
 
       If this bit is set, the :c:type:`PySequenceMethods` struct referenced by
-      :attr:`tp_as_sequence` and the :c:type:`PyNumberMethods` structure referenced by
-      :attr:`tp_as_number` contain the fields for in-place operators. In particular,
+      :c:member:`~PyTypeObject.tp_as_sequence` and the :c:type:`PyNumberMethods` structure referenced by
+      :c:member:`~PyTypeObject.tp_as_number` contain the fields for in-place operators. In particular,
       this means that the :c:type:`PyNumberMethods` structure has the fields
       :attr:`nb_inplace_add`, :attr:`nb_inplace_subtract`,
       :attr:`nb_inplace_multiply`, :attr:`nb_inplace_divide`,
@@ -473,7 +473,7 @@
    .. data:: Py_TPFLAGS_CHECKTYPES
 
       If this bit is set, the binary and ternary operations in the
-      :c:type:`PyNumberMethods` structure referenced by :attr:`tp_as_number` accept
+      :c:type:`PyNumberMethods` structure referenced by :c:member:`~PyTypeObject.tp_as_number` accept
       arguments of arbitrary object types, and do their own type conversions if
       needed.  If this bit is clear, those operations require that all arguments have
       the current type as their type, and the caller is supposed to perform a coercion
@@ -485,31 +485,31 @@
 
    .. data:: Py_TPFLAGS_HAVE_RICHCOMPARE
 
-      If this bit is set, the type object has the :attr:`tp_richcompare` field, as
-      well as the :attr:`tp_traverse` and the :attr:`tp_clear` fields.
+      If this bit is set, the type object has the :c:member:`~PyTypeObject.tp_richcompare` field, as
+      well as the :c:member:`~PyTypeObject.tp_traverse` and the :c:member:`~PyTypeObject.tp_clear` fields.
 
 
    .. data:: Py_TPFLAGS_HAVE_WEAKREFS
 
-      If this bit is set, the :attr:`tp_weaklistoffset` field is defined.  Instances
-      of a type are weakly referenceable if the type's :attr:`tp_weaklistoffset` field
+      If this bit is set, the :c:member:`~PyTypeObject.tp_weaklistoffset` field is defined.  Instances
+      of a type are weakly referenceable if the type's :c:member:`~PyTypeObject.tp_weaklistoffset` field
       has a value greater than zero.
 
 
    .. data:: Py_TPFLAGS_HAVE_ITER
 
-      If this bit is set, the type object has the :attr:`tp_iter` and
-      :attr:`tp_iternext` fields.
+      If this bit is set, the type object has the :c:member:`~PyTypeObject.tp_iter` and
+      :c:member:`~PyTypeObject.tp_iternext` fields.
 
 
    .. data:: Py_TPFLAGS_HAVE_CLASS
 
       If this bit is set, the type object has several new fields defined starting in
-      Python 2.2: :attr:`tp_methods`, :attr:`tp_members`, :attr:`tp_getset`,
-      :attr:`tp_base`, :attr:`tp_dict`, :attr:`tp_descr_get`, :attr:`tp_descr_set`,
-      :attr:`tp_dictoffset`, :attr:`tp_init`, :attr:`tp_alloc`, :attr:`tp_new`,
-      :attr:`tp_free`, :attr:`tp_is_gc`, :attr:`tp_bases`, :attr:`tp_mro`,
-      :attr:`tp_cache`, :attr:`tp_subclasses`, and :attr:`tp_weaklist`.
+      Python 2.2: :c:member:`~PyTypeObject.tp_methods`, :c:member:`~PyTypeObject.tp_members`, :c:member:`~PyTypeObject.tp_getset`,
+      :c:member:`~PyTypeObject.tp_base`, :c:member:`~PyTypeObject.tp_dict`, :c:member:`~PyTypeObject.tp_descr_get`, :c:member:`~PyTypeObject.tp_descr_set`,
+      :c:member:`~PyTypeObject.tp_dictoffset`, :c:member:`~PyTypeObject.tp_init`, :c:member:`~PyTypeObject.tp_alloc`, :c:member:`~PyTypeObject.tp_new`,
+      :c:member:`~PyTypeObject.tp_free`, :c:member:`~PyTypeObject.tp_is_gc`, :c:member:`~PyTypeObject.tp_bases`, :c:member:`~PyTypeObject.tp_mro`,
+      :c:member:`~PyTypeObject.tp_cache`, :c:member:`~PyTypeObject.tp_subclasses`, and :c:member:`~PyTypeObject.tp_weaklist`.
 
 
    .. data:: Py_TPFLAGS_HEAPTYPE
@@ -547,7 +547,7 @@
       is set, instances must be created using :c:func:`PyObject_GC_New` and
       destroyed using :c:func:`PyObject_GC_Del`.  More information in section
       :ref:`supporting-cycle-detection`.  This bit also implies that the
-      GC-related fields :attr:`tp_traverse` and :attr:`tp_clear` are present in
+      GC-related fields :c:member:`~PyTypeObject.tp_traverse` and :c:member:`~PyTypeObject.tp_clear` are present in
       the type object; but those fields also exist when
       :const:`Py_TPFLAGS_HAVE_GC` is clear but
       :const:`Py_TPFLAGS_HAVE_RICHCOMPARE` is set.
@@ -582,8 +582,8 @@
    about Python's garbage collection scheme can be found in section
    :ref:`supporting-cycle-detection`.
 
-   The :attr:`tp_traverse` pointer is used by the garbage collector to detect
-   reference cycles. A typical implementation of a :attr:`tp_traverse` function
+   The :c:member:`~PyTypeObject.tp_traverse` pointer is used by the garbage collector to detect
+   reference cycles. A typical implementation of a :c:member:`~PyTypeObject.tp_traverse` function
    simply calls :c:func:`Py_VISIT` on each of the instance's members that are Python
    objects.  For example, this is function :c:func:`local_traverse` from the
    :mod:`thread` extension module::
@@ -609,9 +609,9 @@
    :c:func:`local_traverse` to have these specific names; don't name them just
    anything.
 
-   This field is inherited by subtypes together with :attr:`tp_clear` and the
-   :const:`Py_TPFLAGS_HAVE_GC` flag bit: the flag bit, :attr:`tp_traverse`, and
-   :attr:`tp_clear` are all inherited from the base type if they are all zero in
+   This field is inherited by subtypes together with :c:member:`~PyTypeObject.tp_clear` and the
+   :const:`Py_TPFLAGS_HAVE_GC` flag bit: the flag bit, :c:member:`~PyTypeObject.tp_traverse`, and
+   :c:member:`~PyTypeObject.tp_clear` are all inherited from the base type if they are all zero in
    the subtype *and* the subtype has the :const:`Py_TPFLAGS_HAVE_RICHCOMPARE` flag
    bit set.
 
@@ -621,17 +621,17 @@
    An optional pointer to a clear function for the garbage collector. This is only
    used if the :const:`Py_TPFLAGS_HAVE_GC` flag bit is set.
 
-   The :attr:`tp_clear` member function is used to break reference cycles in cyclic
-   garbage detected by the garbage collector.  Taken together, all :attr:`tp_clear`
+   The :c:member:`~PyTypeObject.tp_clear` member function is used to break reference cycles in cyclic
+   garbage detected by the garbage collector.  Taken together, all :c:member:`~PyTypeObject.tp_clear`
    functions in the system must combine to break all reference cycles.  This is
-   subtle, and if in any doubt supply a :attr:`tp_clear` function.  For example,
-   the tuple type does not implement a :attr:`tp_clear` function, because it's
+   subtle, and if in any doubt supply a :c:member:`~PyTypeObject.tp_clear` function.  For example,
+   the tuple type does not implement a :c:member:`~PyTypeObject.tp_clear` function, because it's
    possible to prove that no reference cycle can be composed entirely of tuples.
-   Therefore the :attr:`tp_clear` functions of other types must be sufficient to
+   Therefore the :c:member:`~PyTypeObject.tp_clear` functions of other types must be sufficient to
    break any cycle containing a tuple.  This isn't immediately obvious, and there's
-   rarely a good reason to avoid implementing :attr:`tp_clear`.
+   rarely a good reason to avoid implementing :c:member:`~PyTypeObject.tp_clear`.
 
-   Implementations of :attr:`tp_clear` should drop the instance's references to
+   Implementations of :c:member:`~PyTypeObject.tp_clear` should drop the instance's references to
    those of its members that may be Python objects, and set its pointers to those
    members to *NULL*, as in the following example::
 
@@ -656,18 +656,18 @@
    so that *self* knows the contained object can no longer be used.  The
    :c:func:`Py_CLEAR` macro performs the operations in a safe order.
 
-   Because the goal of :attr:`tp_clear` functions is to break reference cycles,
+   Because the goal of :c:member:`~PyTypeObject.tp_clear` functions is to break reference cycles,
    it's not necessary to clear contained objects like Python strings or Python
    integers, which can't participate in reference cycles. On the other hand, it may
    be convenient to clear all contained Python objects, and write the type's
-   :attr:`tp_dealloc` function to invoke :attr:`tp_clear`.
+   :c:member:`~PyTypeObject.tp_dealloc` function to invoke :c:member:`~PyTypeObject.tp_clear`.
 
    More information about Python's garbage collection scheme can be found in
    section :ref:`supporting-cycle-detection`.
 
-   This field is inherited by subtypes together with :attr:`tp_traverse` and the
-   :const:`Py_TPFLAGS_HAVE_GC` flag bit: the flag bit, :attr:`tp_traverse`, and
-   :attr:`tp_clear` are all inherited from the base type if they are all zero in
+   This field is inherited by subtypes together with :c:member:`~PyTypeObject.tp_traverse` and the
+   :const:`Py_TPFLAGS_HAVE_GC` flag bit: the flag bit, :c:member:`~PyTypeObject.tp_traverse`, and
+   :c:member:`~PyTypeObject.tp_clear` are all inherited from the base type if they are all zero in
    the subtype *and* the subtype has the :const:`Py_TPFLAGS_HAVE_RICHCOMPARE` flag
    bit set.
 
@@ -688,13 +688,13 @@
       comparisons makes sense (e.g. ``==`` and ``!=``, but not ``<`` and
       friends), directly raise :exc:`TypeError` in the rich comparison function.
 
-   This field is inherited by subtypes together with :attr:`tp_compare` and
-   :attr:`tp_hash`: a subtype inherits all three of :attr:`tp_compare`,
-   :attr:`tp_richcompare`, and :attr:`tp_hash`, when the subtype's
-   :attr:`tp_compare`, :attr:`tp_richcompare`, and :attr:`tp_hash` are all *NULL*.
+   This field is inherited by subtypes together with :c:member:`~PyTypeObject.tp_compare` and
+   :c:member:`~PyTypeObject.tp_hash`: a subtype inherits all three of :c:member:`~PyTypeObject.tp_compare`,
+   :c:member:`~PyTypeObject.tp_richcompare`, and :c:member:`~PyTypeObject.tp_hash`, when the subtype's
+   :c:member:`~PyTypeObject.tp_compare`, :c:member:`~PyTypeObject.tp_richcompare`, and :c:member:`~PyTypeObject.tp_hash` are all *NULL*.
 
    The following constants are defined to be used as the third argument for
-   :attr:`tp_richcompare` and for :c:func:`PyObject_RichCompare`:
+   :c:member:`~PyTypeObject.tp_richcompare` and for :c:func:`PyObject_RichCompare`:
 
    +----------------+------------+
    | Constant       | Comparison |
@@ -725,26 +725,26 @@
    instance structure needs to include a field of type :c:type:`PyObject\*` which is
    initialized to *NULL*.
 
-   Do not confuse this field with :attr:`tp_weaklist`; that is the list head for
+   Do not confuse this field with :c:member:`~PyTypeObject.tp_weaklist`; that is the list head for
    weak references to the type object itself.
 
    This field is inherited by subtypes, but see the rules listed below. A subtype
    may override this offset; this means that the subtype uses a different weak
    reference list head than the base type.  Since the list head is always found via
-   :attr:`tp_weaklistoffset`, this should not be a problem.
+   :c:member:`~PyTypeObject.tp_weaklistoffset`, this should not be a problem.
 
    When a type defined by a class statement has no :attr:`__slots__` declaration,
    and none of its base types are weakly referenceable, the type is made weakly
    referenceable by adding a weak reference list head slot to the instance layout
-   and setting the :attr:`tp_weaklistoffset` of that slot's offset.
+   and setting the :c:member:`~PyTypeObject.tp_weaklistoffset` of that slot's offset.
 
    When a type's :attr:`__slots__` declaration contains a slot named
    :attr:`__weakref__`, that slot becomes the weak reference list head for
    instances of the type, and the slot's offset is stored in the type's
-   :attr:`tp_weaklistoffset`.
+   :c:member:`~PyTypeObject.tp_weaklistoffset`.
 
    When a type's :attr:`__slots__` declaration does not contain a slot named
-   :attr:`__weakref__`, the type inherits its :attr:`tp_weaklistoffset` from its
+   :attr:`__weakref__`, the type inherits its :c:member:`~PyTypeObject.tp_weaklistoffset` from its
    base type.
 
 The next two fields only exist if the :const:`Py_TPFLAGS_HAVE_ITER` flag bit is
@@ -772,7 +772,7 @@
    are iterators (although classic instances always have this function, even if
    they don't define a :meth:`next` method).
 
-   Iterator types should also define the :attr:`tp_iter` function, and that
+   Iterator types should also define the :c:member:`~PyTypeObject.tp_iter` function, and that
    function should return the iterator instance itself (not a new iterator
    instance).
 
@@ -780,7 +780,7 @@
 
    This field is inherited by subtypes.
 
-The next fields, up to and including :attr:`tp_weaklist`, only exist if the
+The next fields, up to and including :c:member:`~PyTypeObject.tp_weaklist`, only exist if the
 :const:`Py_TPFLAGS_HAVE_CLASS` flag bit is set.
 
 
@@ -790,7 +790,7 @@
    structures, declaring regular methods of this type.
 
    For each entry in the array, an entry is added to the type's dictionary (see
-   :attr:`tp_dict` below) containing a method descriptor.
+   :c:member:`~PyTypeObject.tp_dict` below) containing a method descriptor.
 
    This field is not inherited by subtypes (methods are inherited through a
    different mechanism).
@@ -803,7 +803,7 @@
    this type.
 
    For each entry in the array, an entry is added to the type's dictionary (see
-   :attr:`tp_dict` below) containing a member descriptor.
+   :c:member:`~PyTypeObject.tp_dict` below) containing a member descriptor.
 
    This field is not inherited by subtypes (members are inherited through a
    different mechanism).
@@ -815,7 +815,7 @@
    structures, declaring computed attributes of instances of this type.
 
    For each entry in the array, an entry is added to the type's dictionary (see
-   :attr:`tp_dict` below) containing a getset descriptor.
+   :c:member:`~PyTypeObject.tp_dict` below) containing a getset descriptor.
 
    This field is not inherited by subtypes (computed attributes are inherited
    through a different mechanism).
@@ -894,7 +894,7 @@
    the instance variable dictionary; this offset is used by
    :c:func:`PyObject_GenericGetAttr`.
 
-   Do not confuse this field with :attr:`tp_dict`; that is the dictionary for
+   Do not confuse this field with :c:member:`~PyTypeObject.tp_dict`; that is the dictionary for
    attributes of the type object itself.
 
    If the value of this field is greater than zero, it specifies the offset from
@@ -903,20 +903,20 @@
    offset is more expensive to use, and should only be used when the instance
    structure contains a variable-length part.  This is used for example to add an
    instance variable dictionary to subtypes of :class:`str` or :class:`tuple`. Note
-   that the :attr:`tp_basicsize` field should account for the dictionary added to
+   that the :c:member:`~PyTypeObject.tp_basicsize` field should account for the dictionary added to
    the end in that case, even though the dictionary is not included in the basic
    object layout.  On a system with a pointer size of 4 bytes,
-   :attr:`tp_dictoffset` should be set to ``-4`` to indicate that the dictionary is
+   :c:member:`~PyTypeObject.tp_dictoffset` should be set to ``-4`` to indicate that the dictionary is
    at the very end of the structure.
 
    The real dictionary offset in an instance can be computed from a negative
-   :attr:`tp_dictoffset` as follows::
+   :c:member:`~PyTypeObject.tp_dictoffset` as follows::
 
       dictoffset = tp_basicsize + abs(ob_size)*tp_itemsize + tp_dictoffset
       if dictoffset is not aligned on sizeof(void*):
           round up to sizeof(void*)
 
-   where :attr:`tp_basicsize`, :attr:`tp_itemsize` and :attr:`tp_dictoffset` are
+   where :c:member:`~PyTypeObject.tp_basicsize`, :c:member:`~PyTypeObject.tp_itemsize` and :c:member:`~PyTypeObject.tp_dictoffset` are
    taken from the type object, and :attr:`ob_size` is taken from the instance.  The
    absolute value is taken because long ints use the sign of :attr:`ob_size` to
    store the sign of the number.  (There's never a need to do this calculation
@@ -925,15 +925,15 @@
    This field is inherited by subtypes, but see the rules listed below. A subtype
    may override this offset; this means that the subtype instances store the
    dictionary at a difference offset than the base type.  Since the dictionary is
-   always found via :attr:`tp_dictoffset`, this should not be a problem.
+   always found via :c:member:`~PyTypeObject.tp_dictoffset`, this should not be a problem.
 
    When a type defined by a class statement has no :attr:`__slots__` declaration,
    and none of its base types has an instance variable dictionary, a dictionary
-   slot is added to the instance layout and the :attr:`tp_dictoffset` is set to
+   slot is added to the instance layout and the :c:member:`~PyTypeObject.tp_dictoffset` is set to
    that slot's offset.
 
    When a type defined by a class statement has a :attr:`__slots__` declaration,
-   the type inherits its :attr:`tp_dictoffset` from its base type.
+   the type inherits its :c:member:`~PyTypeObject.tp_dictoffset` from its base type.
 
    (Adding a slot named :attr:`__dict__` to the :attr:`__slots__` declaration does
    not have the expected effect, it just causes confusion.  Maybe this should be
@@ -957,15 +957,15 @@
    arguments represent positional and keyword arguments of the call to
    :meth:`__init__`.
 
-   The :attr:`tp_init` function, if not *NULL*, is called when an instance is
-   created normally by calling its type, after the type's :attr:`tp_new` function
-   has returned an instance of the type.  If the :attr:`tp_new` function returns an
+   The :c:member:`~PyTypeObject.tp_init` function, if not *NULL*, is called when an instance is
+   created normally by calling its type, after the type's :c:member:`~PyTypeObject.tp_new` function
+   has returned an instance of the type.  If the :c:member:`~PyTypeObject.tp_new` function returns an
    instance of some other type that is not a subtype of the original type, no
-   :attr:`tp_init` function is called; if :attr:`tp_new` returns an instance of a
-   subtype of the original type, the subtype's :attr:`tp_init` is called.  (VERSION
+   :c:member:`~PyTypeObject.tp_init` function is called; if :c:member:`~PyTypeObject.tp_new` returns an instance of a
+   subtype of the original type, the subtype's :c:member:`~PyTypeObject.tp_init` is called.  (VERSION
    NOTE: described here is what is implemented in Python 2.2.1 and later.  In
-   Python 2.2, the :attr:`tp_init` of the type of the object returned by
-   :attr:`tp_new` was always called, if not *NULL*.)
+   Python 2.2, the :c:member:`~PyTypeObject.tp_init` of the type of the object returned by
+   :c:member:`~PyTypeObject.tp_new` was always called, if not *NULL*.)
 
    This field is inherited by subtypes.
 
@@ -982,14 +982,14 @@
    initialization.  It should return a pointer to a block of memory of adequate
    length for the instance, suitably aligned, and initialized to zeros, but with
    :attr:`ob_refcnt` set to ``1`` and :attr:`ob_type` set to the type argument.  If
-   the type's :attr:`tp_itemsize` is non-zero, the object's :attr:`ob_size` field
+   the type's :c:member:`~PyTypeObject.tp_itemsize` is non-zero, the object's :attr:`ob_size` field
    should be initialized to *nitems* and the length of the allocated memory block
    should be ``tp_basicsize + nitems*tp_itemsize``, rounded up to a multiple of
    ``sizeof(void*)``; otherwise, *nitems* is not used and the length of the block
-   should be :attr:`tp_basicsize`.
+   should be :c:member:`~PyTypeObject.tp_basicsize`.
 
    Do not use this function to do any other instance initialization, not even to
-   allocate additional memory; that should be done by :attr:`tp_new`.
+   allocate additional memory; that should be done by :c:member:`~PyTypeObject.tp_new`.
 
    This field is inherited by static subtypes, but not by dynamic subtypes
    (subtypes created by a class statement); in the latter, this field is always set
@@ -1011,20 +1011,20 @@
 
    The subtype argument is the type of the object being created; the *args* and
    *kwds* arguments represent positional and keyword arguments of the call to the
-   type.  Note that subtype doesn't have to equal the type whose :attr:`tp_new`
+   type.  Note that subtype doesn't have to equal the type whose :c:member:`~PyTypeObject.tp_new`
    function is called; it may be a subtype of that type (but not an unrelated
    type).
 
-   The :attr:`tp_new` function should call ``subtype->tp_alloc(subtype, nitems)``
+   The :c:member:`~PyTypeObject.tp_new` function should call ``subtype->tp_alloc(subtype, nitems)``
    to allocate space for the object, and then do only as much further
    initialization as is absolutely necessary.  Initialization that can safely be
-   ignored or repeated should be placed in the :attr:`tp_init` handler.  A good
+   ignored or repeated should be placed in the :c:member:`~PyTypeObject.tp_init` handler.  A good
    rule of thumb is that for immutable types, all initialization should take place
-   in :attr:`tp_new`, while for mutable types, most initialization should be
-   deferred to :attr:`tp_init`.
+   in :c:member:`~PyTypeObject.tp_new`, while for mutable types, most initialization should be
+   deferred to :c:member:`~PyTypeObject.tp_init`.
 
    This field is inherited by subtypes, except it is not inherited by static types
-   whose :attr:`tp_base` is *NULL* or ``&PyBaseObject_Type``.  The latter exception
+   whose :c:member:`~PyTypeObject.tp_base` is *NULL* or ``&PyBaseObject_Type``.  The latter exception
    is a precaution so that old extension types don't become callable simply by
    being linked with Python 2.2.
 
@@ -1057,7 +1057,7 @@
 
    The garbage collector needs to know whether a particular object is collectible
    or not.  Normally, it is sufficient to look at the object's type's
-   :attr:`tp_flags` field, and check the :const:`Py_TPFLAGS_HAVE_GC` flag bit.  But
+   :c:member:`~PyTypeObject.tp_flags` field, and check the :const:`Py_TPFLAGS_HAVE_GC` flag bit.  But
    some types have a mixture of statically and dynamically allocated instances, and
    the statically allocated instances are not collectible.  Such types should
    define this function; it should return ``1`` for a collectible instance, and
@@ -1129,7 +1129,7 @@
 
 .. c:member:: PyTypeObject* PyTypeObject.tp_next
 
-   Pointer to the next type object with a non-zero :attr:`tp_allocs` field.
+   Pointer to the next type object with a non-zero :c:member:`~PyTypeObject.tp_allocs` field.
 
 Also, note that, in a garbage collected Python, tp_dealloc may be called from
 any Python thread, not just the thread which created the object (if the object
@@ -1289,13 +1289,13 @@
 
    This function is used by :c:func:`PySequence_Concat` and has the same
    signature.  It is also used by the ``+`` operator, after trying the numeric
-   addition via the :attr:`tp_as_number.nb_add` slot.
+   addition via the :c:member:`~PyTypeObject.tp_as_number.nb_add` slot.
 
 .. c:member:: ssizeargfunc PySequenceMethods.sq_repeat
 
    This function is used by :c:func:`PySequence_Repeat` and has the same
    signature.  It is also used by the ``*`` operator, after trying numeric
-   multiplication via the :attr:`tp_as_number.nb_mul` slot.
+   multiplication via the :c:member:`~PyTypeObject.tp_as_number.nb_mul` slot.
 
 .. c:member:: ssizeargfunc PySequenceMethods.sq_item
 
@@ -1348,14 +1348,14 @@
 pointer/length pair.  These chunks are called :dfn:`segments` and are presumed
 to be non-contiguous in memory.
 
-If an object does not export the buffer interface, then its :attr:`tp_as_buffer`
+If an object does not export the buffer interface, then its :c:member:`~PyTypeObject.tp_as_buffer`
 member in the :c:type:`PyTypeObject` structure should be *NULL*.  Otherwise, the
-:attr:`tp_as_buffer` will point to a :c:type:`PyBufferProcs` structure.
+:c:member:`~PyTypeObject.tp_as_buffer` will point to a :c:type:`PyBufferProcs` structure.
 
 .. note::
 
    It is very important that your :c:type:`PyTypeObject` structure uses
-   :const:`Py_TPFLAGS_DEFAULT` for the value of the :attr:`tp_flags` member rather
+   :const:`Py_TPFLAGS_DEFAULT` for the value of the :c:member:`~PyTypeObject.tp_flags` member rather
    than ``0``.  This tells the Python runtime that your :c:type:`PyBufferProcs`
    structure contains the :attr:`bf_getcharbuffer` slot. Older versions of Python
    did not have this member, so a new Python interpreter using an old extension
@@ -1385,7 +1385,7 @@
 
    The last slot is :attr:`bf_getcharbuffer`, of type :c:type:`getcharbufferproc`.
    This slot will only be present if the :const:`Py_TPFLAGS_HAVE_GETCHARBUFFER`
-   flag is present in the :attr:`tp_flags` field of the object's
+   flag is present in the :c:member:`~PyTypeObject.tp_flags` field of the object's
    :c:type:`PyTypeObject`. Before using this slot, the caller should test whether it
    is present by using the :c:func:`PyType_HasFeature` function.  If the flag is
    present, :attr:`bf_getcharbuffer` may be *NULL*, indicating that the object's
diff --git a/Doc/extending/newtypes.rst b/Doc/extending/newtypes.rst
index 269c8fd..4278213 100644
--- a/Doc/extending/newtypes.rst
+++ b/Doc/extending/newtypes.rst
@@ -150,11 +150,11 @@
 .. note::
 
    If you want your type to be subclassable from Python, and your type has the same
-   :attr:`tp_basicsize` as its base type, you may have problems with multiple
+   :c:member:`~PyTypeObject.tp_basicsize` as its base type, you may have problems with multiple
    inheritance.  A Python subclass of your type will have to list your type first
    in its :attr:`__bases__`, or else it will not be able to call your type's
    :meth:`__new__` method without getting an error.  You can avoid this problem by
-   ensuring that your type has a larger value for :attr:`tp_basicsize` than its
+   ensuring that your type has a larger value for :c:member:`~PyTypeObject.tp_basicsize` than its
    base type does.  Most of the time, this will be true anyway, because either your
    base type will be :class:`object`, or else you will be adding data members to
    your base type, and therefore increasing its size.
@@ -174,7 +174,7 @@
 All types should include this constant in their flags.  It enables all of the
 members defined by the current version of Python.
 
-We provide a doc string for the type in :attr:`tp_doc`. ::
+We provide a doc string for the type in :c:member:`~PyTypeObject.tp_doc`. ::
 
    "Noddy objects",           /* tp_doc */
 
@@ -183,12 +183,12 @@
 the module.  We'll expand this example later to have more interesting behavior.
 
 For now, all we want to be able to do is to create new :class:`Noddy` objects.
-To enable object creation, we have to provide a :attr:`tp_new` implementation.
+To enable object creation, we have to provide a :c:member:`~PyTypeObject.tp_new` implementation.
 In this case, we can just use the default implementation provided by the API
 function :c:func:`PyType_GenericNew`.  We'd like to just assign this to the
-:attr:`tp_new` slot, but we can't, for portability sake, On some platforms or
+:c:member:`~PyTypeObject.tp_new` slot, but we can't, for portability sake, On some platforms or
 compilers, we can't statically initialize a structure member with a function
-defined in another C module, so, instead, we'll assign the :attr:`tp_new` slot
+defined in another C module, so, instead, we'll assign the :c:member:`~PyTypeObject.tp_new` slot
 in the module initialization function just before calling
 :c:func:`PyType_Ready`::
 
@@ -283,13 +283,13 @@
        self->ob_type->tp_free((PyObject*)self);
    }
 
-which is assigned to the :attr:`tp_dealloc` member::
+which is assigned to the :c:member:`~PyTypeObject.tp_dealloc` member::
 
    (destructor)Noddy_dealloc, /*tp_dealloc*/
 
 This method decrements the reference counts of the two Python attributes. We use
 :c:func:`Py_XDECREF` here because the :attr:`first` and :attr:`last` members
-could be *NULL*.  It then calls the :attr:`tp_free` member of the object's type
+could be *NULL*.  It then calls the :c:member:`~PyTypeObject.tp_free` member of the object's type
 to free the object's memory.  Note that the object's type might not be
 :class:`NoddyType`, because the object may be an instance of a subclass.
 
@@ -323,7 +323,7 @@
        return (PyObject *)self;
    }
 
-and install it in the :attr:`tp_new` member::
+and install it in the :c:member:`~PyTypeObject.tp_new` member::
 
    Noddy_new,                 /* tp_new */
 
@@ -344,16 +344,16 @@
 often ignore the arguments, leaving the argument handling to initializer
 methods. Note that if the type supports subclassing, the type passed may not be
 the type being defined.  The new method calls the tp_alloc slot to allocate
-memory. We don't fill the :attr:`tp_alloc` slot ourselves. Rather
+memory. We don't fill the :c:member:`~PyTypeObject.tp_alloc` slot ourselves. Rather
 :c:func:`PyType_Ready` fills it for us by inheriting it from our base class,
 which is :class:`object` by default.  Most types use the default allocation.
 
 .. note::
 
-   If you are creating a co-operative :attr:`tp_new` (one that calls a base type's
-   :attr:`tp_new` or :meth:`__new__`), you must *not* try to determine what method
+   If you are creating a co-operative :c:member:`~PyTypeObject.tp_new` (one that calls a base type's
+   :c:member:`~PyTypeObject.tp_new` or :meth:`__new__`), you must *not* try to determine what method
    to call using method resolution order at runtime.  Always statically determine
-   what type you are going to call, and call its :attr:`tp_new` directly, or via
+   what type you are going to call, and call its :c:member:`~PyTypeObject.tp_new` directly, or via
    ``type->tp_base->tp_new``.  If you do not do this, Python subclasses of your
    type that also inherit from other Python-defined classes may not work correctly.
    (Specifically, you may not be able to create instances of such subclasses
@@ -390,11 +390,11 @@
        return 0;
    }
 
-by filling the :attr:`tp_init` slot. ::
+by filling the :c:member:`~PyTypeObject.tp_init` slot. ::
 
    (initproc)Noddy_init,         /* tp_init */
 
-The :attr:`tp_init` slot is exposed in Python as the :meth:`__init__` method. It
+The :c:member:`~PyTypeObject.tp_init` slot is exposed in Python as the :meth:`__init__` method. It
 is used to initialize an object after it's created. Unlike the new method, we
 can't guarantee that the initializer is called.  The initializer isn't called
 when unpickling objects and it can be overridden.  Our initializer accepts
@@ -424,7 +424,7 @@
 * when we know that deallocation of the object [#]_ will not cause any calls
   back into our type's code
 
-* when decrementing a reference count in a :attr:`tp_dealloc` handler when
+* when decrementing a reference count in a :c:member:`~PyTypeObject.tp_dealloc` handler when
   garbage-collections is not supported [#]_
 
 We want to expose our instance variables as attributes. There are a
@@ -440,7 +440,7 @@
        {NULL}  /* Sentinel */
    };
 
-and put the definitions in the :attr:`tp_members` slot::
+and put the definitions in the :c:member:`~PyTypeObject.tp_members` slot::
 
    Noddy_members,             /* tp_members */
 
@@ -516,7 +516,7 @@
        {NULL}  /* Sentinel */
    };
 
-and assign them to the :attr:`tp_methods` slot::
+and assign them to the :c:member:`~PyTypeObject.tp_methods` slot::
 
    Noddy_methods,             /* tp_methods */
 
@@ -611,7 +611,7 @@
        {NULL}  /* Sentinel */
    };
 
-and register it in the :attr:`tp_getset` slot::
+and register it in the :c:member:`~PyTypeObject.tp_getset` slot::
 
    Noddy_getseters,           /* tp_getset */
 
@@ -628,7 +628,7 @@
        {NULL}  /* Sentinel */
    };
 
-We also need to update the :attr:`tp_init` handler to only allow strings [#]_ to
+We also need to update the :c:member:`~PyTypeObject.tp_init` handler to only allow strings [#]_ to
 be passed::
 
    static int
@@ -747,7 +747,7 @@
 
 .. note::
 
-   Note that the :attr:`tp_traverse` implementation must name its arguments exactly
+   Note that the :c:member:`~PyTypeObject.tp_traverse` implementation must name its arguments exactly
    *visit* and *arg* in order to use :c:func:`Py_VISIT`.  This is to encourage
    uniformity across these boring implementations.
 
@@ -784,7 +784,7 @@
 reference count drops to zero, we might cause code to run that calls back into
 the object.  In addition, because we now support garbage collection, we also
 have to worry about code being run that triggers garbage collection.  If garbage
-collection is run, our :attr:`tp_traverse` handler could get called. We can't
+collection is run, our :c:member:`~PyTypeObject.tp_traverse` handler could get called. We can't
 take a chance of having :c:func:`Noddy_traverse` called when a member's reference
 count has dropped to zero and its value hasn't been set to *NULL*.
 
@@ -804,8 +804,8 @@
 
    Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE | Py_TPFLAGS_HAVE_GC, /*tp_flags*/
 
-That's pretty much it.  If we had written custom :attr:`tp_alloc` or
-:attr:`tp_free` slots, we'd need to modify them for cyclic-garbage collection.
+That's pretty much it.  If we had written custom :c:member:`~PyTypeObject.tp_alloc` or
+:c:member:`~PyTypeObject.tp_free` slots, we'd need to modify them for cyclic-garbage collection.
 Most extensions will use the versions automatically provided.
 
 
@@ -864,8 +864,8 @@
 
 This pattern is important when writing a type with custom :attr:`new` and
 :attr:`dealloc` methods. The :attr:`new` method should not actually create the
-memory for the object with :attr:`tp_alloc`, that will be handled by the base
-class when calling its :attr:`tp_new`.
+memory for the object with :c:member:`~PyTypeObject.tp_alloc`, that will be handled by the base
+class when calling its :c:member:`~PyTypeObject.tp_new`.
 
 When filling out the :c:func:`PyTypeObject` for the :class:`Shoddy` type, you see
 a slot for :c:func:`tp_base`. Due to cross platform compiler issues, you can't
@@ -890,8 +890,8 @@
    }
 
 Before calling :c:func:`PyType_Ready`, the type structure must have the
-:attr:`tp_base` slot filled in. When we are deriving a new type, it is not
-necessary to fill out the :attr:`tp_alloc` slot with :c:func:`PyType_GenericNew`
+:c:member:`~PyTypeObject.tp_base` slot filled in. When we are deriving a new type, it is not
+necessary to fill out the :c:member:`~PyTypeObject.tp_alloc` slot with :c:func:`PyType_GenericNew`
 -- the allocate function from the base type will be inherited.
 
 After that, calling :c:func:`PyType_Ready` and adding the type object to the
@@ -934,7 +934,7 @@
 
 These fields tell the runtime how much memory to allocate when new objects of
 this type are created.  Python has some built-in support for variable length
-structures (think: strings, lists) which is where the :attr:`tp_itemsize` field
+structures (think: strings, lists) which is where the :c:member:`~PyTypeObject.tp_itemsize` field
 comes in.  This will be dealt with later. ::
 
    char *tp_doc;
@@ -1032,13 +1032,13 @@
 expensive.
 
 These handlers are all optional, and most types at most need to implement the
-:attr:`tp_str` and :attr:`tp_repr` handlers. ::
+:c:member:`~PyTypeObject.tp_str` and :c:member:`~PyTypeObject.tp_repr` handlers. ::
 
    reprfunc tp_repr;
    reprfunc tp_str;
    printfunc tp_print;
 
-The :attr:`tp_repr` handler should return a string object containing a
+The :c:member:`~PyTypeObject.tp_repr` handler should return a string object containing a
 representation of the instance for which it is called.  Here is a simple
 example::
 
@@ -1049,15 +1049,15 @@
                                   obj->obj_UnderlyingDatatypePtr->size);
    }
 
-If no :attr:`tp_repr` handler is specified, the interpreter will supply a
-representation that uses the type's :attr:`tp_name` and a uniquely-identifying
+If no :c:member:`~PyTypeObject.tp_repr` handler is specified, the interpreter will supply a
+representation that uses the type's :c:member:`~PyTypeObject.tp_name` and a uniquely-identifying
 value for the object.
 
-The :attr:`tp_str` handler is to :func:`str` what the :attr:`tp_repr` handler
+The :c:member:`~PyTypeObject.tp_str` handler is to :func:`str` what the :c:member:`~PyTypeObject.tp_repr` handler
 described above is to :func:`repr`; that is, it is called when Python code calls
 :func:`str` on an instance of your object.  Its implementation is very similar
-to the :attr:`tp_repr` function, but the resulting string is intended for human
-consumption.  If :attr:`tp_str` is not specified, the :attr:`tp_repr` handler is
+to the :c:member:`~PyTypeObject.tp_repr` function, but the resulting string is intended for human
+consumption.  If :c:member:`~PyTypeObject.tp_str` is not specified, the :c:member:`~PyTypeObject.tp_repr` handler is
 used instead.
 
 Here is a simple example::
@@ -1152,7 +1152,7 @@
 type object.  Each descriptor controls access to one attribute of the instance
 object.  Each of the tables is optional; if all three are *NULL*, instances of
 the type will only have attributes that are inherited from their base type, and
-should leave the :attr:`tp_getattro` and :attr:`tp_setattro` fields *NULL* as
+should leave the :c:member:`~PyTypeObject.tp_getattro` and :c:member:`~PyTypeObject.tp_setattro` fields *NULL* as
 well, allowing the base type to handle attributes.
 
 The tables are declared as three fields of the type object::
@@ -1161,7 +1161,7 @@
    struct PyMemberDef *tp_members;
    struct PyGetSetDef *tp_getset;
 
-If :attr:`tp_methods` is not *NULL*, it must refer to an array of
+If :c:member:`~PyTypeObject.tp_methods` is not *NULL*, it must refer to an array of
 :c:type:`PyMethodDef` structures.  Each entry in the table is an instance of this
 structure::
 
@@ -1225,13 +1225,13 @@
    single: WRITE_RESTRICTED
    single: RESTRICTED
 
-An interesting advantage of using the :attr:`tp_members` table to build
+An interesting advantage of using the :c:member:`~PyTypeObject.tp_members` table to build
 descriptors that are used at runtime is that any attribute defined this way can
 have an associated doc string simply by providing the text in the table.  An
 application can use the introspection API to retrieve the descriptor from the
 class object, and get the doc string using its :attr:`__doc__` attribute.
 
-As with the :attr:`tp_methods` table, a sentinel entry with a :attr:`name` value
+As with the :c:member:`~PyTypeObject.tp_methods` table, a sentinel entry with a :attr:`name` value
 of *NULL* is required.
 
 .. XXX Descriptors need to be explained in more detail somewhere, but not here.
@@ -1257,7 +1257,7 @@
 called, so that if you do need to extend their functionality, you'll understand
 what needs to be done.
 
-The :attr:`tp_getattr` handler is called when the object requires an attribute
+The :c:member:`~PyTypeObject.tp_getattr` handler is called when the object requires an attribute
 look-up.  It is called in the same situations where the :meth:`__getattr__`
 method of a class would be called.
 
@@ -1265,7 +1265,7 @@
 :c:func:`newdatatype_getSize` and :c:func:`newdatatype_setSize` in the example
 below), (2) provide a method table listing these functions, and (3) provide a
 getattr function that returns the result of a lookup in that table.  The method
-table uses the same structure as the :attr:`tp_methods` field of the type
+table uses the same structure as the :c:member:`~PyTypeObject.tp_methods` field of the type
 object.
 
 Here is an example::
@@ -1284,11 +1284,11 @@
        return Py_FindMethod(newdatatype_methods, (PyObject *)obj, name);
    }
 
-The :attr:`tp_setattr` handler is called when the :meth:`__setattr__` or
+The :c:member:`~PyTypeObject.tp_setattr` handler is called when the :meth:`__setattr__` or
 :meth:`__delattr__` method of a class instance would be called.  When an
 attribute should be deleted, the third parameter will be *NULL*.  Here is an
 example that simply raises an exception; if this were really all you wanted, the
-:attr:`tp_setattr` handler should be set to *NULL*. ::
+:c:member:`~PyTypeObject.tp_setattr` handler should be set to *NULL*. ::
 
    static int
    newdatatype_setattr(newdatatypeobject *obj, char *name, PyObject *v)
@@ -1305,7 +1305,7 @@
 
    cmpfunc tp_compare;
 
-The :attr:`tp_compare` handler is called when comparisons are needed and the
+The :c:member:`~PyTypeObject.tp_compare` handler is called when comparisons are needed and the
 object does not implement the specific rich comparison method which matches the
 requested comparison.  (It is always used if defined and the
 :c:func:`PyObject_Compare` or :c:func:`PyObject_Cmp` functions are used, or if
@@ -1316,7 +1316,7 @@
 greater than, respectively; as of Python 2.2, this is no longer allowed.  In the
 future, other return values may be assigned a different meaning.)
 
-A :attr:`tp_compare` handler may raise an exception.  In this case it should
+A :c:member:`~PyTypeObject.tp_compare` handler may raise an exception.  In this case it should
 return a negative value.  The caller has to test for the exception using
 :c:func:`PyErr_Occurred`.
 
@@ -1391,7 +1391,7 @@
 
 This function is called when an instance of your data type is "called", for
 example, if ``obj1`` is an instance of your data type and the Python script
-contains ``obj1('hello')``, the :attr:`tp_call` handler is invoked.
+contains ``obj1('hello')``, the :c:member:`~PyTypeObject.tp_call` handler is invoked.
 
 This function takes three arguments:
 
@@ -1480,7 +1480,7 @@
 For an object to be weakly referencable, the extension must include a
 :c:type:`PyObject\*` field in the instance structure for the use of the weak
 reference mechanism; it must be initialized to *NULL* by the object's
-constructor.  It must also set the :attr:`tp_weaklistoffset` field of the
+constructor.  It must also set the :c:member:`~PyTypeObject.tp_weaklistoffset` field of the
 corresponding type object to the offset of the field. For example, the instance
 type is defined with the following structure::
 
@@ -1566,7 +1566,7 @@
 .. [#] This is true when we know that the object is a basic type, like a string or a
    float.
 
-.. [#] We relied on this in the :attr:`tp_dealloc` handler in this example, because our
+.. [#] We relied on this in the :c:member:`~PyTypeObject.tp_dealloc` handler in this example, because our
    type doesn't support garbage collection. Even if a type supports garbage
    collection, there are calls that can be made to "untrack" the object from
    garbage collection, however, these calls are advanced and not covered here.
diff --git a/Doc/library/gc.rst b/Doc/library/gc.rst
index 80a2d92..f02f09d 100644
--- a/Doc/library/gc.rst
+++ b/Doc/library/gc.rst
@@ -132,8 +132,8 @@
 
    Return a list of objects directly referred to by any of the arguments. The
    referents returned are those objects visited by the arguments' C-level
-   :attr:`tp_traverse` methods (if any), and may not be all objects actually
-   directly reachable.  :attr:`tp_traverse` methods are supported only by objects
+   :c:member:`~PyTypeObject.tp_traverse` methods (if any), and may not be all objects actually
+   directly reachable.  :c:member:`~PyTypeObject.tp_traverse` methods are supported only by objects
    that support garbage collection, and are only required to visit objects that may
    be involved in a cycle.  So, for example, if an integer is directly reachable
    from an argument, that integer object may or may not appear in the result list.
diff --git a/Doc/library/stdtypes.rst b/Doc/library/stdtypes.rst
index 0001453..756339d 100644
--- a/Doc/library/stdtypes.rst
+++ b/Doc/library/stdtypes.rst
@@ -614,7 +614,7 @@
    iterators for those iteration types.  (An example of an object supporting
    multiple forms of iteration would be a tree structure which supports both
    breadth-first and depth-first traversal.)  This method corresponds to the
-   :attr:`tp_iter` slot of the type structure for Python objects in the Python/C
+   :c:member:`~PyTypeObject.tp_iter` slot of the type structure for Python objects in the Python/C
    API.
 
 The iterator objects themselves are required to support the following two
@@ -625,7 +625,7 @@
 
    Return the iterator object itself.  This is required to allow both containers
    and iterators to be used with the :keyword:`for` and :keyword:`in` statements.
-   This method corresponds to the :attr:`tp_iter` slot of the type structure for
+   This method corresponds to the :c:member:`~PyTypeObject.tp_iter` slot of the type structure for
    Python objects in the Python/C API.
 
 
@@ -633,7 +633,7 @@
 
    Return the next item from the container.  If there are no further items, raise
    the :exc:`StopIteration` exception.  This method corresponds to the
-   :attr:`tp_iternext` slot of the type structure for Python objects in the
+   :c:member:`~PyTypeObject.tp_iternext` slot of the type structure for Python objects in the
    Python/C API.
 
 Python defines several iterator objects to support iteration over general and
diff --git a/Doc/whatsnew/2.2.rst b/Doc/whatsnew/2.2.rst
index 412c1d0..5f6fe11 100644
--- a/Doc/whatsnew/2.2.rst
+++ b/Doc/whatsnew/2.2.rst
@@ -450,9 +450,9 @@
 Python classes can define an :meth:`__iter__` method, which should create and
 return a new iterator for the object; if the object is its own iterator, this
 method can just return ``self``.  In particular, iterators will usually be their
-own iterators.  Extension types implemented in C can implement a :attr:`tp_iter`
+own iterators.  Extension types implemented in C can implement a :c:member:`~PyTypeObject.tp_iter`
 function in order to return an iterator, and extension types that want to behave
-as iterators can define a :attr:`tp_iternext` function.
+as iterators can define a :c:member:`~PyTypeObject.tp_iternext` function.
 
 So, after all this, what do iterators actually do?  They have one required
 method, :meth:`next`, which takes no arguments and returns the next value.  When
@@ -478,7 +478,7 @@
 In 2.2, Python's :keyword:`for` statement no longer expects a sequence; it
 expects something for which :func:`iter` will return an iterator. For backward
 compatibility and convenience, an iterator is automatically constructed for
-sequences that don't implement :meth:`__iter__` or a :attr:`tp_iter` slot, so
+sequences that don't implement :meth:`__iter__` or a :c:member:`~PyTypeObject.tp_iter` slot, so
 ``for i in [1,2,3]`` will still work.  Wherever the Python interpreter loops
 over a sequence, it's been changed to use the iterator protocol.  This means you
 can do things like this::