diff --git a/Doc/c-api/abstract.rst b/Doc/c-api/abstract.rst
index 59e4cc4..bc9001c 100644
--- a/Doc/c-api/abstract.rst
+++ b/Doc/c-api/abstract.rst
@@ -13,7 +13,7 @@
 will raise a Python exception.
 
 It is not possible to use these functions on objects that are not properly
-initialized, such as a list object that has been created by :cfunc:`PyList_New`,
+initialized, such as a list object that has been created by :c:func:`PyList_New`,
 but whose items have not been set to some non-\ ``NULL`` value yet.
 
 .. toctree::
diff --git a/Doc/c-api/allocation.rst b/Doc/c-api/allocation.rst
index 28b9c56..cb43cbf 100644
--- a/Doc/c-api/allocation.rst
+++ b/Doc/c-api/allocation.rst
@@ -6,20 +6,20 @@
 ==============================
 
 
-.. cfunction:: PyObject* _PyObject_New(PyTypeObject *type)
+.. c:function:: PyObject* _PyObject_New(PyTypeObject *type)
 
 
-.. cfunction:: PyVarObject* _PyObject_NewVar(PyTypeObject *type, Py_ssize_t size)
+.. c:function:: PyVarObject* _PyObject_NewVar(PyTypeObject *type, Py_ssize_t size)
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: void _PyObject_Del(PyObject *op)
+.. c:function:: void _PyObject_Del(PyObject *op)
 
 
-.. cfunction:: PyObject* PyObject_Init(PyObject *op, PyTypeObject *type)
+.. c:function:: PyObject* PyObject_Init(PyObject *op, PyTypeObject *type)
 
    Initialize a newly-allocated object *op* with its type and initial
    reference.  Returns the initialized object.  If *type* indicates that the
@@ -28,17 +28,17 @@
    affected.
 
 
-.. cfunction:: PyVarObject* PyObject_InitVar(PyVarObject *op, PyTypeObject *type, Py_ssize_t size)
+.. c:function:: PyVarObject* PyObject_InitVar(PyVarObject *op, PyTypeObject *type, Py_ssize_t size)
 
-   This does everything :cfunc:`PyObject_Init` does, and also initializes the
+   This does everything :c:func:`PyObject_Init` does, and also initializes the
    length information for a variable-size object.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: TYPE* PyObject_New(TYPE, PyTypeObject *type)
+.. c:function:: TYPE* PyObject_New(TYPE, PyTypeObject *type)
 
    Allocate a new Python object using the C structure type *TYPE* and the
    Python type object *type*.  Fields not defined by the Python object header
@@ -47,7 +47,7 @@
    the type object.
 
 
-.. cfunction:: TYPE* PyObject_NewVar(TYPE, PyTypeObject *type, Py_ssize_t size)
+.. c:function:: TYPE* PyObject_NewVar(TYPE, PyTypeObject *type, Py_ssize_t size)
 
    Allocate a new Python object using the C structure type *TYPE* and the
    Python type object *type*.  Fields not defined by the Python object header
@@ -59,20 +59,20 @@
    improving the memory management efficiency.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: void PyObject_Del(PyObject *op)
+.. c:function:: void PyObject_Del(PyObject *op)
 
-   Releases memory allocated to an object using :cfunc:`PyObject_New` or
-   :cfunc:`PyObject_NewVar`.  This is normally called from the
+   Releases memory allocated to an object using :c:func:`PyObject_New` or
+   :c:func:`PyObject_NewVar`.  This is normally called from the
    :attr:`tp_dealloc` handler specified in the object's type.  The fields of
    the object should not be accessed after this call as the memory is no
    longer a valid Python object.
 
 
-.. cfunction:: PyObject* Py_InitModule(char *name, PyMethodDef *methods)
+.. c:function:: PyObject* Py_InitModule(char *name, PyMethodDef *methods)
 
    Create a new module object based on a name and table of functions,
    returning the new module object.
@@ -82,7 +82,7 @@
       *methods* argument.
 
 
-.. cfunction:: PyObject* Py_InitModule3(char *name, PyMethodDef *methods, char *doc)
+.. c:function:: PyObject* Py_InitModule3(char *name, PyMethodDef *methods, char *doc)
 
    Create a new module object based on a name and table of functions,
    returning the new module object.  If *doc* is non-*NULL*, it will be used
@@ -93,7 +93,7 @@
       *methods* argument.
 
 
-.. cfunction:: PyObject* Py_InitModule4(char *name, PyMethodDef *methods, char *doc, PyObject *self, int apiver)
+.. c:function:: PyObject* Py_InitModule4(char *name, PyMethodDef *methods, char *doc, PyObject *self, int apiver)
 
    Create a new module object based on a name and table of functions,
    returning the new module object.  If *doc* is non-*NULL*, it will be used
@@ -107,7 +107,7 @@
    .. note::
 
       Most uses of this function should probably be using the
-      :cfunc:`Py_InitModule3` instead; only use this if you are sure you need
+      :c:func:`Py_InitModule3` instead; only use this if you are sure you need
       it.
 
    .. versionchanged:: 2.3
@@ -115,7 +115,7 @@
       *methods* argument.
 
 
-.. cvar:: PyObject _Py_NoneStruct
+.. c:var:: PyObject _Py_NoneStruct
 
    Object which is visible in Python as ``None``.  This should only be
    accessed using the ``Py_None`` macro, which evaluates to a pointer to this
diff --git a/Doc/c-api/arg.rst b/Doc/c-api/arg.rst
index 4f8591b..8fbdc50 100644
--- a/Doc/c-api/arg.rst
+++ b/Doc/c-api/arg.rst
@@ -9,8 +9,8 @@
 methods.  Additional information and examples are available in
 :ref:`extending-index`.
 
-The first three of these functions described, :cfunc:`PyArg_ParseTuple`,
-:cfunc:`PyArg_ParseTupleAndKeywords`, and :cfunc:`PyArg_Parse`, all use
+The first three of these functions described, :c:func:`PyArg_ParseTuple`,
+:c:func:`PyArg_ParseTupleAndKeywords`, and :c:func:`PyArg_Parse`, all use
 *format strings* which are used to tell the function about the expected
 arguments.  The format strings use the same syntax for each of these
 functions.
@@ -38,7 +38,7 @@
    raised. Unicode objects are converted to C strings using the default
    encoding.  If this conversion fails, a :exc:`UnicodeError` is raised.
 
-``s#`` (string, Unicode or any read buffer compatible object) [const char \*, int (or :ctype:`Py_ssize_t`, see below)]
+``s#`` (string, Unicode or any read buffer compatible object) [const char \*, int (or :c:type:`Py_ssize_t`, see below)]
    This variant on ``s`` stores into two C variables, the first one a pointer
    to a character string, the second one its length.  In this case the Python
    string may contain embedded null bytes.  Unicode objects pass back a
@@ -47,8 +47,8 @@
    a reference to the raw internal data representation.
 
    Starting with Python 2.5 the type of the length argument can be controlled
-   by defining the macro :cmacro:`PY_SSIZE_T_CLEAN` before including
-   :file:`Python.h`.  If the macro is defined, length is a :ctype:`Py_ssize_t`
+   by defining the macro :c:macro:`PY_SSIZE_T_CLEAN` before including
+   :file:`Python.h`.  If the macro is defined, length is a :c:type:`Py_ssize_t`
    rather than an int.
 
 ``s*`` (string, Unicode, or any buffer compatible object) [Py_buffer]
@@ -76,14 +76,14 @@
    Convert a Python Unicode object to a C pointer to a NUL-terminated buffer
    of 16-bit Unicode (UTF-16) data.  As with ``s``, there is no need to
    provide storage for the Unicode data buffer; a pointer to the existing
-   Unicode data is stored into the :ctype:`Py_UNICODE` pointer variable whose
+   Unicode data is stored into the :c:type:`Py_UNICODE` pointer variable whose
    address you pass.
 
 ``u#`` (Unicode) [Py_UNICODE \*, int]
    This variant on ``u`` stores into two C variables, the first one a pointer
    to a Unicode data buffer, the second one its length. Non-Unicode objects
    are handled by interpreting their read-buffer pointer as pointer to a
-   :ctype:`Py_UNICODE` array.
+   :c:type:`Py_UNICODE` array.
 
 ``es`` (string, Unicode or character buffer compatible object) [const char \*encoding, char \*\*buffer]
    This variant on ``s`` is used for encoding Unicode and objects convertible
@@ -91,18 +91,18 @@
    embedded NUL bytes.
 
    This format requires two arguments.  The first is only used as input, and
-   must be a :ctype:`const char\*` which points to the name of an encoding as
+   must be a :c:type:`const char\*` which points to the name of an encoding as
    a NUL-terminated string, or *NULL*, in which case the default encoding is
    used.  An exception is raised if the named encoding is not known to Python.
-   The second argument must be a :ctype:`char\*\*`; the value of the pointer
+   The second argument must be a :c:type:`char\*\*`; the value of the pointer
    it references will be set to a buffer with the contents of the argument
    text.  The text will be encoded in the encoding specified by the first
    argument.
 
-   :cfunc:`PyArg_ParseTuple` will allocate a buffer of the needed size, copy
+   :c:func:`PyArg_ParseTuple` will allocate a buffer of the needed size, copy
    the encoded data into this buffer and adjust *\*buffer* to reference the
    newly allocated storage.  The caller is responsible for calling
-   :cfunc:`PyMem_Free` to free the allocated buffer after use.
+   :c:func:`PyMem_Free` to free the allocated buffer after use.
 
 ``et`` (string, Unicode or character buffer compatible object) [const char \*encoding, char \*\*buffer]
    Same as ``es`` except that 8-bit string objects are passed through without
@@ -115,10 +115,10 @@
    allows input data which contains NUL characters.
 
    It requires three arguments.  The first is only used as input, and must be
-   a :ctype:`const char\*` which points to the name of an encoding as a
+   a :c:type:`const char\*` which points to the name of an encoding as a
    NUL-terminated string, or *NULL*, in which case the default encoding is
    used.  An exception is raised if the named encoding is not known to Python.
-   The second argument must be a :ctype:`char\*\*`; the value of the pointer
+   The second argument must be a :c:type:`char\*\*`; the value of the pointer
    it references will be set to a buffer with the contents of the argument
    text.  The text will be encoded in the encoding specified by the first
    argument.  The third argument must be a pointer to an integer; the
@@ -129,11 +129,11 @@
    If *\*buffer* points a *NULL* pointer, the function will allocate a buffer
    of the needed size, copy the encoded data into this buffer and set
    *\*buffer* to reference the newly allocated storage.  The caller is
-   responsible for calling :cfunc:`PyMem_Free` to free the allocated buffer
+   responsible for calling :c:func:`PyMem_Free` to free the allocated buffer
    after usage.
 
    If *\*buffer* points to a non-*NULL* pointer (an already allocated buffer),
-   :cfunc:`PyArg_ParseTuple` will use this location as the buffer and
+   :c:func:`PyArg_ParseTuple` will use this location as the buffer and
    interpret the initial value of *\*buffer_length* as the buffer size.  It
    will then copy the encoded data into the buffer and NUL-terminate it.  If
    the buffer is not large enough, a :exc:`ValueError` will be set.
@@ -148,71 +148,71 @@
 
 ``b`` (integer) [unsigned char]
    Convert a nonnegative Python integer to an unsigned tiny int, stored in a C
-   :ctype:`unsigned char`.
+   :c:type:`unsigned char`.
 
 ``B`` (integer) [unsigned char]
    Convert a Python integer to a tiny int without overflow checking, stored in
-   a C :ctype:`unsigned char`.
+   a C :c:type:`unsigned char`.
 
    .. versionadded:: 2.3
 
 ``h`` (integer) [short int]
-   Convert a Python integer to a C :ctype:`short int`.
+   Convert a Python integer to a C :c:type:`short int`.
 
 ``H`` (integer) [unsigned short int]
-   Convert a Python integer to a C :ctype:`unsigned short int`, without
+   Convert a Python integer to a C :c:type:`unsigned short int`, without
    overflow checking.
 
    .. versionadded:: 2.3
 
 ``i`` (integer) [int]
-   Convert a Python integer to a plain C :ctype:`int`.
+   Convert a Python integer to a plain C :c:type:`int`.
 
 ``I`` (integer) [unsigned int]
-   Convert a Python integer to a C :ctype:`unsigned int`, without overflow
+   Convert a Python integer to a C :c:type:`unsigned int`, without overflow
    checking.
 
    .. versionadded:: 2.3
 
 ``l`` (integer) [long int]
-   Convert a Python integer to a C :ctype:`long int`.
+   Convert a Python integer to a C :c:type:`long int`.
 
 ``k`` (integer) [unsigned long]
-   Convert a Python integer or long integer to a C :ctype:`unsigned long`
+   Convert a Python integer or long integer to a C :c:type:`unsigned long`
    without overflow checking.
 
    .. versionadded:: 2.3
 
 ``L`` (integer) [PY_LONG_LONG]
-   Convert a Python integer to a C :ctype:`long long`.  This format is only
-   available on platforms that support :ctype:`long long` (or :ctype:`_int64`
+   Convert a Python integer to a C :c:type:`long long`.  This format is only
+   available on platforms that support :c:type:`long long` (or :c:type:`_int64`
    on Windows).
 
 ``K`` (integer) [unsigned PY_LONG_LONG]
-   Convert a Python integer or long integer to a C :ctype:`unsigned long long`
+   Convert a Python integer or long integer to a C :c:type:`unsigned long long`
    without overflow checking.  This format is only available on platforms that
-   support :ctype:`unsigned long long` (or :ctype:`unsigned _int64` on
+   support :c:type:`unsigned long long` (or :c:type:`unsigned _int64` on
    Windows).
 
    .. versionadded:: 2.3
 
 ``n`` (integer) [Py_ssize_t]
-   Convert a Python integer or long integer to a C :ctype:`Py_ssize_t`.
+   Convert a Python integer or long integer to a C :c:type:`Py_ssize_t`.
 
    .. versionadded:: 2.5
 
 ``c`` (string of length 1) [char]
    Convert a Python character, represented as a string of length 1, to a C
-   :ctype:`char`.
+   :c:type:`char`.
 
 ``f`` (float) [float]
-   Convert a Python floating point number to a C :ctype:`float`.
+   Convert a Python floating point number to a C :c:type:`float`.
 
 ``d`` (float) [double]
-   Convert a Python floating point number to a C :ctype:`double`.
+   Convert a Python floating point number to a C :c:type:`double`.
 
 ``D`` (complex) [Py_complex]
-   Convert a Python complex number to a C :ctype:`Py_complex` structure.
+   Convert a Python complex number to a C :c:type:`Py_complex` structure.
 
 ``O`` (object) [PyObject \*]
    Store a Python object (without any conversion) in a C object pointer.  The
@@ -222,20 +222,20 @@
 ``O!`` (object) [*typeobject*, PyObject \*]
    Store a Python object in a C object pointer.  This is similar to ``O``, but
    takes two C arguments: the first is the address of a Python type object,
-   the second is the address of the C variable (of type :ctype:`PyObject\*`)
+   the second is the address of the C variable (of type :c:type:`PyObject\*`)
    into which the object pointer is stored.  If the Python object does not
    have the required type, :exc:`TypeError` is raised.
 
 ``O&`` (object) [*converter*, *anything*]
    Convert a Python object to a C variable through a *converter* function.
    This takes two arguments: the first is a function, the second is the
-   address of a C variable (of arbitrary type), converted to :ctype:`void \*`.
+   address of a C variable (of arbitrary type), converted to :c:type:`void \*`.
    The *converter* function in turn is called as follows::
 
       status = converter(object, address);
 
    where *object* is the Python object to be converted and *address* is the
-   :ctype:`void\*` argument that was passed to the :cfunc:`PyArg_Parse\*`
+   :c:type:`void\*` argument that was passed to the :c:func:`PyArg_Parse\*`
    function.  The returned *status* should be ``1`` for a successful
    conversion and ``0`` if the conversion has failed.  When the conversion
    fails, the *converter* function should raise an exception and leave the
@@ -244,17 +244,17 @@
 ``S`` (string) [PyStringObject \*]
    Like ``O`` but requires that the Python object is a string object.  Raises
    :exc:`TypeError` if the object is not a string object.  The C variable may
-   also be declared as :ctype:`PyObject\*`.
+   also be declared as :c:type:`PyObject\*`.
 
 ``U`` (Unicode string) [PyUnicodeObject \*]
    Like ``O`` but requires that the Python object is a Unicode object.  Raises
    :exc:`TypeError` if the object is not a Unicode object.  The C variable may
-   also be declared as :ctype:`PyObject\*`.
+   also be declared as :c:type:`PyObject\*`.
 
 ``t#`` (read-only character buffer) [char \*, int]
    Like ``s#``, but accepts any object which implements the read-only buffer
-   interface.  The :ctype:`char\*` variable is set to point to the first byte
-   of the buffer, and the :ctype:`int` is set to the length of the buffer.
+   interface.  The :c:type:`char\*` variable is set to point to the first byte
+   of the buffer, and the :c:type:`int` is set to the length of the buffer.
    Only single-segment buffer objects are accepted; :exc:`TypeError` is raised
    for all others.
 
@@ -266,8 +266,8 @@
 
 ``w#`` (read-write character buffer) [char \*, Py_ssize_t]
    Like ``s#``, but accepts any object which implements the read-write buffer
-   interface.  The :ctype:`char \*` variable is set to point to the first byte
-   of the buffer, and the :ctype:`Py_ssize_t` is set to the length of the
+   interface.  The :c:type:`char \*` variable is set to point to the first byte
+   of the buffer, and the :c:type:`Py_ssize_t` is set to the length of the
    buffer.  Only single-segment buffer objects are accepted; :exc:`TypeError`
    is raised for all others.
 
@@ -302,13 +302,13 @@
    Indicates that the remaining arguments in the Python argument list are
    optional.  The C variables corresponding to optional arguments should be
    initialized to their default value --- when an optional argument is not
-   specified, :cfunc:`PyArg_ParseTuple` does not touch the contents of the
+   specified, :c:func:`PyArg_ParseTuple` does not touch the contents of the
    corresponding C variable(s).
 
 ``:``
    The list of format units ends here; the string after the colon is used as
    the function name in error messages (the "associated value" of the
-   exception that :cfunc:`PyArg_ParseTuple` raises).
+   exception that :c:func:`PyArg_ParseTuple` raises).
 
 ``;``
    The list of format units ends here; the string after the semicolon is used
@@ -325,40 +325,40 @@
 should match what is specified for the corresponding format unit in that case.
 
 For the conversion to succeed, the *arg* object must match the format and the
-format must be exhausted.  On success, the :cfunc:`PyArg_Parse\*` functions
+format must be exhausted.  On success, the :c:func:`PyArg_Parse\*` functions
 return true, otherwise they return false and raise an appropriate exception.
-When the :cfunc:`PyArg_Parse\*` functions fail due to conversion failure in
+When the :c:func:`PyArg_Parse\*` functions fail due to conversion failure in
 one of the format units, the variables at the addresses corresponding to that
 and the following format units are left untouched.
 
 
-.. cfunction:: int PyArg_ParseTuple(PyObject *args, const char *format, ...)
+.. c:function:: int PyArg_ParseTuple(PyObject *args, const char *format, ...)
 
    Parse the parameters of a function that takes only positional parameters
    into local variables.  Returns true on success; on failure, it returns
    false and raises the appropriate exception.
 
 
-.. cfunction:: int PyArg_VaParse(PyObject *args, const char *format, va_list vargs)
+.. c:function:: int PyArg_VaParse(PyObject *args, const char *format, va_list vargs)
 
-   Identical to :cfunc:`PyArg_ParseTuple`, except that it accepts a va_list
+   Identical to :c:func:`PyArg_ParseTuple`, except that it accepts a va_list
    rather than a variable number of arguments.
 
 
-.. cfunction:: int PyArg_ParseTupleAndKeywords(PyObject *args, PyObject *kw, const char *format, char *keywords[], ...)
+.. c:function:: int PyArg_ParseTupleAndKeywords(PyObject *args, PyObject *kw, const char *format, char *keywords[], ...)
 
    Parse the parameters of a function that takes both positional and keyword
    parameters into local variables.  Returns true on success; on failure, it
    returns false and raises the appropriate exception.
 
 
-.. cfunction:: int PyArg_VaParseTupleAndKeywords(PyObject *args, PyObject *kw, const char *format, char *keywords[], va_list vargs)
+.. c:function:: int PyArg_VaParseTupleAndKeywords(PyObject *args, PyObject *kw, const char *format, char *keywords[], va_list vargs)
 
-   Identical to :cfunc:`PyArg_ParseTupleAndKeywords`, except that it accepts a
+   Identical to :c:func:`PyArg_ParseTupleAndKeywords`, except that it accepts a
    va_list rather than a variable number of arguments.
 
 
-.. cfunction:: int PyArg_Parse(PyObject *args, const char *format, ...)
+.. c:function:: int PyArg_Parse(PyObject *args, const char *format, ...)
 
    Function used to deconstruct the argument lists of "old-style" functions
    --- these are functions which use the :const:`METH_OLDARGS` parameter
@@ -369,7 +369,7 @@
    purpose.
 
 
-.. cfunction:: int PyArg_UnpackTuple(PyObject *args, const char *name, Py_ssize_t min, Py_ssize_t max, ...)
+.. c:function:: int PyArg_UnpackTuple(PyObject *args, const char *name, Py_ssize_t min, Py_ssize_t max, ...)
 
    A simpler form of parameter retrieval which does not use a format string to
    specify the types of the arguments.  Functions which use this method to
@@ -378,7 +378,7 @@
    should be passed as *args*; it must actually be a tuple.  The length of the
    tuple must be at least *min* and no more than *max*; *min* and *max* may be
    equal.  Additional arguments must be passed to the function, each of which
-   should be a pointer to a :ctype:`PyObject\*` variable; these will be filled
+   should be a pointer to a :c:type:`PyObject\*` variable; these will be filled
    in with the values from *args*; they will contain borrowed references.  The
    variables which correspond to optional parameters not given by *args* will
    not be filled in; these should be initialized by the caller. This function
@@ -401,26 +401,26 @@
           return result;
       }
 
-   The call to :cfunc:`PyArg_UnpackTuple` in this example is entirely
-   equivalent to this call to :cfunc:`PyArg_ParseTuple`::
+   The call to :c:func:`PyArg_UnpackTuple` in this example is entirely
+   equivalent to this call to :c:func:`PyArg_ParseTuple`::
 
       PyArg_ParseTuple(args, "O|O:ref", &object, &callback)
 
    .. versionadded:: 2.2
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *min* and *max*. This might
+      This function used an :c:type:`int` type for *min* and *max*. This might
       require changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* Py_BuildValue(const char *format, ...)
+.. c:function:: PyObject* Py_BuildValue(const char *format, ...)
 
    Create a new value based on a format string similar to those accepted by
-   the :cfunc:`PyArg_Parse\*` family of functions and a sequence of values.
+   the :c:func:`PyArg_Parse\*` family of functions and a sequence of values.
    Returns the value or *NULL* in the case of an error; an exception will be
    raised if *NULL* is returned.
 
-   :cfunc:`Py_BuildValue` does not always build a tuple.  It builds a tuple
+   :c:func:`Py_BuildValue` does not always build a tuple.  It builds a tuple
    only if its format string contains two or more format units.  If the format
    string is empty, it returns ``None``; if it contains exactly one format
    unit, it returns whatever object is described by that format unit.  To
@@ -430,10 +430,10 @@
    When memory buffers are passed as parameters to supply data to build
    objects, as for the ``s`` and ``s#`` formats, the required data is copied.
    Buffers provided by the caller are never referenced by the objects created
-   by :cfunc:`Py_BuildValue`.  In other words, if your code invokes
-   :cfunc:`malloc` and passes the allocated memory to :cfunc:`Py_BuildValue`,
-   your code is responsible for calling :cfunc:`free` for that memory once
-   :cfunc:`Py_BuildValue` returns.
+   by :c:func:`Py_BuildValue`.  In other words, if your code invokes
+   :c:func:`malloc` and passes the allocated memory to :c:func:`Py_BuildValue`,
+   your code is responsible for calling :c:func:`free` for that memory once
+   :c:func:`Py_BuildValue` returns.
 
    In the following description, the quoted form is the format unit; the entry
    in (round) parentheses is the Python object type that the format unit will
@@ -469,62 +469,62 @@
       length is ignored and ``None`` is returned.
 
    ``i`` (integer) [int]
-      Convert a plain C :ctype:`int` to a Python integer object.
+      Convert a plain C :c:type:`int` to a Python integer object.
 
    ``b`` (integer) [char]
-      Convert a plain C :ctype:`char` to a Python integer object.
+      Convert a plain C :c:type:`char` to a Python integer object.
 
    ``h`` (integer) [short int]
-      Convert a plain C :ctype:`short int` to a Python integer object.
+      Convert a plain C :c:type:`short int` to a Python integer object.
 
    ``l`` (integer) [long int]
-      Convert a C :ctype:`long int` to a Python integer object.
+      Convert a C :c:type:`long int` to a Python integer object.
 
    ``B`` (integer) [unsigned char]
-      Convert a C :ctype:`unsigned char` to a Python integer object.
+      Convert a C :c:type:`unsigned char` to a Python integer object.
 
    ``H`` (integer) [unsigned short int]
-      Convert a C :ctype:`unsigned short int` to a Python integer object.
+      Convert a C :c:type:`unsigned short int` to a Python integer object.
 
    ``I`` (integer/long) [unsigned int]
-      Convert a C :ctype:`unsigned int` to a Python integer object or a Python
+      Convert a C :c:type:`unsigned int` to a Python integer object or a Python
       long integer object, if it is larger than ``sys.maxint``.
 
    ``k`` (integer/long) [unsigned long]
-      Convert a C :ctype:`unsigned long` to a Python integer object or a
+      Convert a C :c:type:`unsigned long` to a Python integer object or a
       Python long integer object, if it is larger than ``sys.maxint``.
 
    ``L`` (long) [PY_LONG_LONG]
-      Convert a C :ctype:`long long` to a Python long integer object. Only
-      available on platforms that support :ctype:`long long`.
+      Convert a C :c:type:`long long` to a Python long integer object. Only
+      available on platforms that support :c:type:`long long`.
 
    ``K`` (long) [unsigned PY_LONG_LONG]
-      Convert a C :ctype:`unsigned long long` to a Python long integer object.
-      Only available on platforms that support :ctype:`unsigned long long`.
+      Convert a C :c:type:`unsigned long long` to a Python long integer object.
+      Only available on platforms that support :c:type:`unsigned long long`.
 
    ``n`` (int) [Py_ssize_t]
-      Convert a C :ctype:`Py_ssize_t` to a Python integer or long integer.
+      Convert a C :c:type:`Py_ssize_t` to a Python integer or long integer.
 
       .. versionadded:: 2.5
 
    ``c`` (string of length 1) [char]
-      Convert a C :ctype:`int` representing a character to a Python string of
+      Convert a C :c:type:`int` representing a character to a Python string of
       length 1.
 
    ``d`` (float) [double]
-      Convert a C :ctype:`double` to a Python floating point number.
+      Convert a C :c:type:`double` to a Python floating point number.
 
    ``f`` (float) [float]
       Same as ``d``.
 
    ``D`` (complex) [Py_complex \*]
-      Convert a C :ctype:`Py_complex` structure to a Python complex number.
+      Convert a C :c:type:`Py_complex` structure to a Python complex number.
 
    ``O`` (object) [PyObject \*]
       Pass a Python object untouched (except for its reference count, which is
       incremented by one).  If the object passed in is a *NULL* pointer, it is
       assumed that this was caused because the call producing the argument
-      found an error and set an exception. Therefore, :cfunc:`Py_BuildValue`
+      found an error and set an exception. Therefore, :c:func:`Py_BuildValue`
       will return *NULL* but won't raise an exception.  If no exception has
       been raised yet, :exc:`SystemError` is set.
 
@@ -539,7 +539,7 @@
    ``O&`` (object) [*converter*, *anything*]
       Convert *anything* to a Python object through a *converter* function.
       The function is called with *anything* (which should be compatible with
-      :ctype:`void \*`) as its argument and should return a "new" Python
+      :c:type:`void \*`) as its argument and should return a "new" Python
       object, or *NULL* if an error occurred.
 
    ``(items)`` (tuple) [*matching-items*]
@@ -558,7 +558,7 @@
    If there is an error in the format string, the :exc:`SystemError` exception
    is set and *NULL* returned.
 
-.. cfunction:: PyObject* Py_VaBuildValue(const char *format, va_list vargs)
+.. c:function:: PyObject* Py_VaBuildValue(const char *format, va_list vargs)
 
-   Identical to :cfunc:`Py_BuildValue`, except that it accepts a va_list
+   Identical to :c:func:`Py_BuildValue`, except that it accepts a va_list
    rather than a variable number of arguments.
diff --git a/Doc/c-api/bool.rst b/Doc/c-api/bool.rst
index 2bf6e7e..fede348 100644
--- a/Doc/c-api/bool.rst
+++ b/Doc/c-api/bool.rst
@@ -11,26 +11,26 @@
 are available, however.
 
 
-.. cfunction:: int PyBool_Check(PyObject *o)
+.. c:function:: int PyBool_Check(PyObject *o)
 
-   Return true if *o* is of type :cdata:`PyBool_Type`.
+   Return true if *o* is of type :c:data:`PyBool_Type`.
 
    .. versionadded:: 2.3
 
 
-.. cvar:: PyObject* Py_False
+.. c:var:: PyObject* Py_False
 
    The Python ``False`` object.  This object has no methods.  It needs to be
    treated just like any other object with respect to reference counts.
 
 
-.. cvar:: PyObject* Py_True
+.. c:var:: PyObject* Py_True
 
    The Python ``True`` object.  This object has no methods.  It needs to be treated
    just like any other object with respect to reference counts.
 
 
-.. cmacro:: Py_RETURN_FALSE
+.. c:macro:: Py_RETURN_FALSE
 
    Return :const:`Py_False` from a function, properly incrementing its reference
    count.
@@ -38,7 +38,7 @@
    .. versionadded:: 2.4
 
 
-.. cmacro:: Py_RETURN_TRUE
+.. c:macro:: Py_RETURN_TRUE
 
    Return :const:`Py_True` from a function, properly incrementing its reference
    count.
@@ -46,7 +46,7 @@
    .. versionadded:: 2.4
 
 
-.. cfunction:: PyObject* PyBool_FromLong(long v)
+.. c:function:: PyObject* PyBool_FromLong(long v)
 
    Return a new reference to :const:`Py_True` or :const:`Py_False` depending on the
    truth value of *v*.
diff --git a/Doc/c-api/buffer.rst b/Doc/c-api/buffer.rst
index 21e8c4a..7b6d1ae 100644
--- a/Doc/c-api/buffer.rst
+++ b/Doc/c-api/buffer.rst
@@ -27,7 +27,7 @@
 An example user of the buffer interface is the file object's :meth:`write`
 method. Any object that can export a series of bytes through the buffer
 interface can be written to a file. There are a number of format codes to
-:cfunc:`PyArg_ParseTuple` that operate against an object's buffer interface,
+:c:func:`PyArg_ParseTuple` that operate against an object's buffer interface,
 returning data from the target object.
 
 Starting from version 1.6, Python has been providing Python-level buffer
@@ -47,49 +47,49 @@
 ==============================
 
 
-.. ctype:: Py_buffer
+.. c:type:: Py_buffer
 
-   .. cmember:: void *buf
+   .. c:member:: void *buf
 
       A pointer to the start of the memory for the object.
 
-   .. cmember:: Py_ssize_t len
+   .. c:member:: Py_ssize_t len
       :noindex:
 
       The total length of the memory in bytes.
 
-   .. cmember:: int readonly
+   .. c:member:: int readonly
 
       An indicator of whether the buffer is read only.
 
-   .. cmember:: const char *format
+   .. c:member:: const char *format
       :noindex:
 
       A *NULL* terminated string in :mod:`struct` module style syntax giving
       the contents of the elements available through the buffer.  If this is
       *NULL*, ``"B"`` (unsigned bytes) is assumed.
 
-   .. cmember:: int ndim
+   .. c:member:: int ndim
 
       The number of dimensions the memory represents as a multi-dimensional
-      array.  If it is 0, :cdata:`strides` and :cdata:`suboffsets` must be
+      array.  If it is 0, :c:data:`strides` and :c:data:`suboffsets` must be
       *NULL*.
 
-   .. cmember:: Py_ssize_t *shape
+   .. c:member:: Py_ssize_t *shape
 
-      An array of :ctype:`Py_ssize_t`\s the length of :cdata:`ndim` giving the
+      An array of :c:type:`Py_ssize_t`\s the length of :c:data:`ndim` giving the
       shape of the memory as a multi-dimensional array.  Note that
       ``((*shape)[0] * ... * (*shape)[ndims-1])*itemsize`` should be equal to
-      :cdata:`len`.
+      :c:data:`len`.
 
-   .. cmember:: Py_ssize_t *strides
+   .. c:member:: Py_ssize_t *strides
 
-      An array of :ctype:`Py_ssize_t`\s the length of :cdata:`ndim` giving the
+      An array of :c:type:`Py_ssize_t`\s the length of :c:data:`ndim` giving the
       number of bytes to skip to get to a new element in each dimension.
 
-   .. cmember:: Py_ssize_t *suboffsets
+   .. c:member:: Py_ssize_t *suboffsets
 
-      An array of :ctype:`Py_ssize_t`\s the length of :cdata:`ndim`.  If these
+      An array of :c:type:`Py_ssize_t`\s the length of :c:data:`ndim`.  If these
       suboffset numbers are greater than or equal to 0, then the value stored
       along the indicated dimension is a pointer and the suboffset value
       dictates how many bytes to add to the pointer after de-referencing. A
@@ -114,16 +114,16 @@
            }
 
 
-   .. cmember:: Py_ssize_t itemsize
+   .. c:member:: Py_ssize_t itemsize
 
       This is a storage for the itemsize (in bytes) of each element of the
       shared memory. It is technically un-necessary as it can be obtained
-      using :cfunc:`PyBuffer_SizeFromFormat`, however an exporter may know
+      using :c:func:`PyBuffer_SizeFromFormat`, however an exporter may know
       this information without parsing the format string and it is necessary
       to know the itemsize for proper interpretation of striding. Therefore,
       storing it is more convenient and faster.
 
-   .. cmember:: void *internal
+   .. c:member:: void *internal
 
       This is for use internally by the exporting object. For example, this
       might be re-cast as an integer by the exporter and used to store flags
@@ -136,14 +136,14 @@
 ========================
 
 
-.. cfunction:: int PyObject_CheckBuffer(PyObject *obj)
+.. c:function:: int PyObject_CheckBuffer(PyObject *obj)
 
    Return 1 if *obj* supports the buffer interface otherwise 0.
 
 
-.. cfunction:: int PyObject_GetBuffer(PyObject *obj, Py_buffer *view, int flags)
+.. c:function:: int PyObject_GetBuffer(PyObject *obj, Py_buffer *view, int flags)
 
-      Export *obj* into a :ctype:`Py_buffer`, *view*.  These arguments must
+      Export *obj* into a :c:type:`Py_buffer`, *view*.  These arguments must
       never be *NULL*.  The *flags* argument is a bit field indicating what
       kind of buffer the caller is prepared to deal with and therefore what
       kind of buffer the exporter is allowed to return.  The buffer interface
@@ -156,131 +156,131 @@
       just not possible. These errors should be a :exc:`BufferError` unless
       there is another error that is actually causing the problem. The
       exporter can use flags information to simplify how much of the
-      :cdata:`Py_buffer` structure is filled in with non-default values and/or
+      :c:data:`Py_buffer` structure is filled in with non-default values and/or
       raise an error if the object can't support a simpler view of its memory.
 
       0 is returned on success and -1 on error.
 
       The following table gives possible values to the *flags* arguments.
 
-      +------------------------------+---------------------------------------------------+
-      | Flag                         | Description                                       |
-      +==============================+===================================================+
-      | :cmacro:`PyBUF_SIMPLE`       | This is the default flag state.  The returned     |
-      |                              | buffer may or may not have writable memory.  The  |
-      |                              | format of the data will be assumed to be unsigned |
-      |                              | bytes.  This is a "stand-alone" flag constant. It |
-      |                              | never needs to be '|'d to the others. The exporter|
-      |                              | will raise an error if it cannot provide such a   |
-      |                              | contiguous buffer of bytes.                       |
-      |                              |                                                   |
-      +------------------------------+---------------------------------------------------+
-      | :cmacro:`PyBUF_WRITABLE`     | The returned buffer must be writable.  If it is   |
-      |                              | not writable, then raise an error.                |
-      +------------------------------+---------------------------------------------------+
-      | :cmacro:`PyBUF_STRIDES`      | This implies :cmacro:`PyBUF_ND`. The returned     |
-      |                              | buffer must provide strides information (i.e. the |
-      |                              | strides cannot be NULL). This would be used when  |
-      |                              | the consumer can handle strided, discontiguous    |
-      |                              | arrays.  Handling strides automatically assumes   |
-      |                              | you can handle shape.  The exporter can raise an  |
-      |                              | error if a strided representation of the data is  |
-      |                              | not possible (i.e. without the suboffsets).       |
-      |                              |                                                   |
-      +------------------------------+---------------------------------------------------+
-      | :cmacro:`PyBUF_ND`           | The returned buffer must provide shape            |
-      |                              | information. The memory will be assumed C-style   |
-      |                              | contiguous (last dimension varies the             |
-      |                              | fastest). The exporter may raise an error if it   |
-      |                              | cannot provide this kind of contiguous buffer. If |
-      |                              | this is not given then shape will be *NULL*.      |
-      |                              |                                                   |
-      |                              |                                                   |
-      |                              |                                                   |
-      +------------------------------+---------------------------------------------------+
-      |:cmacro:`PyBUF_C_CONTIGUOUS`  | These flags indicate that the contiguity returned |
-      |:cmacro:`PyBUF_F_CONTIGUOUS`  | buffer must be respectively, C-contiguous (last   |
-      |:cmacro:`PyBUF_ANY_CONTIGUOUS`| dimension varies the fastest), Fortran contiguous |
-      |                              | (first dimension varies the fastest) or either    |
-      |                              | one.  All of these flags imply                    |
-      |                              | :cmacro:`PyBUF_STRIDES` and guarantee that the    |
-      |                              | strides buffer info structure will be filled in   |
-      |                              | correctly.                                        |
-      |                              |                                                   |
-      +------------------------------+---------------------------------------------------+
-      | :cmacro:`PyBUF_INDIRECT`     | This flag indicates the returned buffer must have |
-      |                              | suboffsets information (which can be NULL if no   |
-      |                              | suboffsets are needed).  This can be used when    |
-      |                              | the consumer can handle indirect array            |
-      |                              | referencing implied by these suboffsets. This     |
-      |                              | implies :cmacro:`PyBUF_STRIDES`.                  |
-      |                              |                                                   |
-      |                              |                                                   |
-      |                              |                                                   |
-      +------------------------------+---------------------------------------------------+
-      | :cmacro:`PyBUF_FORMAT`       | The returned buffer must have true format         |
-      |                              | information if this flag is provided. This would  |
-      |                              | be used when the consumer is going to be checking |
-      |                              | for what 'kind' of data is actually stored. An    |
-      |                              | exporter should always be able to provide this    |
-      |                              | information if requested. If format is not        |
-      |                              | explicitly requested then the format must be      |
-      |                              | returned as *NULL* (which means ``'B'``, or       |
-      |                              | unsigned bytes)                                   |
-      +------------------------------+---------------------------------------------------+
-      | :cmacro:`PyBUF_STRIDED`      | This is equivalent to ``(PyBUF_STRIDES |          |
-      |                              | PyBUF_WRITABLE)``.                                |
-      +------------------------------+---------------------------------------------------+
-      | :cmacro:`PyBUF_STRIDED_RO`   | This is equivalent to ``(PyBUF_STRIDES)``.        |
-      |                              |                                                   |
-      +------------------------------+---------------------------------------------------+
-      | :cmacro:`PyBUF_RECORDS`      | This is equivalent to ``(PyBUF_STRIDES |          |
-      |                              | PyBUF_FORMAT | PyBUF_WRITABLE)``.                 |
-      +------------------------------+---------------------------------------------------+
-      | :cmacro:`PyBUF_RECORDS_RO`   | This is equivalent to ``(PyBUF_STRIDES |          |
-      |                              | PyBUF_FORMAT)``.                                  |
-      +------------------------------+---------------------------------------------------+
-      | :cmacro:`PyBUF_FULL`         | This is equivalent to ``(PyBUF_INDIRECT |         |
-      |                              | PyBUF_FORMAT | PyBUF_WRITABLE)``.                 |
-      +------------------------------+---------------------------------------------------+
-      | :cmacro:`PyBUF_FULL_RO`      | This is equivalent to ``(PyBUF_INDIRECT |         |
-      |                              | PyBUF_FORMAT)``.                                  |
-      +------------------------------+---------------------------------------------------+
-      | :cmacro:`PyBUF_CONTIG`       | This is equivalent to ``(PyBUF_ND |               |
-      |                              | PyBUF_WRITABLE)``.                                |
-      +------------------------------+---------------------------------------------------+
-      | :cmacro:`PyBUF_CONTIG_RO`    | This is equivalent to ``(PyBUF_ND)``.             |
-      |                              |                                                   |
-      +------------------------------+---------------------------------------------------+
+      +-------------------------------+---------------------------------------------------+
+      | Flag                          | Description                                       |
+      +===============================+===================================================+
+      | :c:macro:`PyBUF_SIMPLE`       | This is the default flag state.  The returned     |
+      |                               | buffer may or may not have writable memory.  The  |
+      |                               | format of the data will be assumed to be unsigned |
+      |                               | bytes.  This is a "stand-alone" flag constant. It |
+      |                               | never needs to be '|'d to the others. The exporter|
+      |                               | will raise an error if it cannot provide such a   |
+      |                               | contiguous buffer of bytes.                       |
+      |                               |                                                   |
+      +-------------------------------+---------------------------------------------------+
+      | :c:macro:`PyBUF_WRITABLE`     | The returned buffer must be writable.  If it is   |
+      |                               | not writable, then raise an error.                |
+      +-------------------------------+---------------------------------------------------+
+      | :c:macro:`PyBUF_STRIDES`      | This implies :c:macro:`PyBUF_ND`. The returned    |
+      |                               | buffer must provide strides information (i.e. the |
+      |                               | strides cannot be NULL). This would be used when  |
+      |                               | the consumer can handle strided, discontiguous    |
+      |                               | arrays.  Handling strides automatically assumes   |
+      |                               | you can handle shape.  The exporter can raise an  |
+      |                               | error if a strided representation of the data is  |
+      |                               | not possible (i.e. without the suboffsets).       |
+      |                               |                                                   |
+      +-------------------------------+---------------------------------------------------+
+      | :c:macro:`PyBUF_ND`           | The returned buffer must provide shape            |
+      |                               | information. The memory will be assumed C-style   |
+      |                               | contiguous (last dimension varies the             |
+      |                               | fastest). The exporter may raise an error if it   |
+      |                               | cannot provide this kind of contiguous buffer. If |
+      |                               | this is not given then shape will be *NULL*.      |
+      |                               |                                                   |
+      |                               |                                                   |
+      |                               |                                                   |
+      +-------------------------------+---------------------------------------------------+
+      |:c:macro:`PyBUF_C_CONTIGUOUS`  | These flags indicate that the contiguity returned |
+      |:c:macro:`PyBUF_F_CONTIGUOUS`  | buffer must be respectively, C-contiguous (last   |
+      |:c:macro:`PyBUF_ANY_CONTIGUOUS`| dimension varies the fastest), Fortran contiguous |
+      |                               | (first dimension varies the fastest) or either    |
+      |                               | one.  All of these flags imply                    |
+      |                               | :c:macro:`PyBUF_STRIDES` and guarantee that the   |
+      |                               | strides buffer info structure will be filled in   |
+      |                               | correctly.                                        |
+      |                               |                                                   |
+      +-------------------------------+---------------------------------------------------+
+      | :c:macro:`PyBUF_INDIRECT`     | This flag indicates the returned buffer must have |
+      |                               | suboffsets information (which can be NULL if no   |
+      |                               | suboffsets are needed).  This can be used when    |
+      |                               | the consumer can handle indirect array            |
+      |                               | referencing implied by these suboffsets. This     |
+      |                               | implies :c:macro:`PyBUF_STRIDES`.                 |
+      |                               |                                                   |
+      |                               |                                                   |
+      |                               |                                                   |
+      +-------------------------------+---------------------------------------------------+
+      | :c:macro:`PyBUF_FORMAT`       | The returned buffer must have true format         |
+      |                               | information if this flag is provided. This would  |
+      |                               | be used when the consumer is going to be checking |
+      |                               | for what 'kind' of data is actually stored. An    |
+      |                               | exporter should always be able to provide this    |
+      |                               | information if requested. If format is not        |
+      |                               | explicitly requested then the format must be      |
+      |                               | returned as *NULL* (which means ``'B'``, or       |
+      |                               | unsigned bytes)                                   |
+      +-------------------------------+---------------------------------------------------+
+      | :c:macro:`PyBUF_STRIDED`      | This is equivalent to ``(PyBUF_STRIDES |          |
+      |                               | PyBUF_WRITABLE)``.                                |
+      +-------------------------------+---------------------------------------------------+
+      | :c:macro:`PyBUF_STRIDED_RO`   | This is equivalent to ``(PyBUF_STRIDES)``.        |
+      |                               |                                                   |
+      +-------------------------------+---------------------------------------------------+
+      | :c:macro:`PyBUF_RECORDS`      | This is equivalent to ``(PyBUF_STRIDES |          |
+      |                               | PyBUF_FORMAT | PyBUF_WRITABLE)``.                 |
+      +-------------------------------+---------------------------------------------------+
+      | :c:macro:`PyBUF_RECORDS_RO`   | This is equivalent to ``(PyBUF_STRIDES |          |
+      |                               | PyBUF_FORMAT)``.                                  |
+      +-------------------------------+---------------------------------------------------+
+      | :c:macro:`PyBUF_FULL`         | This is equivalent to ``(PyBUF_INDIRECT |         |
+      |                               | PyBUF_FORMAT | PyBUF_WRITABLE)``.                 |
+      +-------------------------------+---------------------------------------------------+
+      | :c:macro:`PyBUF_FULL_RO`      | This is equivalent to ``(PyBUF_INDIRECT |         |
+      |                               | PyBUF_FORMAT)``.                                  |
+      +-------------------------------+---------------------------------------------------+
+      | :c:macro:`PyBUF_CONTIG`       | This is equivalent to ``(PyBUF_ND |               |
+      |                               | PyBUF_WRITABLE)``.                                |
+      +-------------------------------+---------------------------------------------------+
+      | :c:macro:`PyBUF_CONTIG_RO`    | This is equivalent to ``(PyBUF_ND)``.             |
+      |                               |                                                   |
+      +-------------------------------+---------------------------------------------------+
 
 
-.. cfunction:: void PyBuffer_Release(Py_buffer *view)
+.. c:function:: void PyBuffer_Release(Py_buffer *view)
 
    Release the buffer *view*.  This should be called when the buffer
    is no longer being used as it may free memory from it.
 
 
-.. cfunction:: Py_ssize_t PyBuffer_SizeFromFormat(const char *)
+.. c:function:: Py_ssize_t PyBuffer_SizeFromFormat(const char *)
 
-   Return the implied :cdata:`~Py_buffer.itemsize` from the struct-stype
-   :cdata:`~Py_buffer.format`.
+   Return the implied :c:data:`~Py_buffer.itemsize` from the struct-stype
+   :c:data:`~Py_buffer.format`.
 
 
-.. cfunction:: int PyBuffer_IsContiguous(Py_buffer *view, char fortran)
+.. c:function:: int PyBuffer_IsContiguous(Py_buffer *view, char fortran)
 
    Return 1 if the memory defined by the *view* is C-style (*fortran* is
    ``'C'``) or Fortran-style (*fortran* is ``'F'``) contiguous or either one
    (*fortran* is ``'A'``).  Return 0 otherwise.
 
 
-.. cfunction:: void PyBuffer_FillContiguousStrides(int ndim, Py_ssize_t *shape, Py_ssize_t *strides, Py_ssize_t itemsize, char fortran)
+.. c:function:: void PyBuffer_FillContiguousStrides(int ndim, Py_ssize_t *shape, Py_ssize_t *strides, Py_ssize_t itemsize, char fortran)
 
    Fill the *strides* array with byte-strides of a contiguous (C-style if
    *fortran* is ``'C'`` or Fortran-style if *fortran* is ``'F'``) array of the
    given shape with the given number of bytes per element.
 
 
-.. cfunction:: int PyBuffer_FillInfo(Py_buffer *view, PyObject *obj, void *buf, Py_ssize_t len, int readonly, int infoflags)
+.. c:function:: int PyBuffer_FillInfo(Py_buffer *view, PyObject *obj, void *buf, Py_ssize_t len, int readonly, int infoflags)
 
    Fill in a buffer-info structure, *view*, correctly for an exporter that can
    only share a contiguous chunk of memory of "unsigned bytes" of the given
@@ -295,13 +295,13 @@
 A :class:`memoryview` object exposes the new C level buffer interface as a
 Python object which can then be passed around like any other object.
 
-.. cfunction:: PyObject *PyMemoryView_FromObject(PyObject *obj)
+.. c:function:: PyObject *PyMemoryView_FromObject(PyObject *obj)
 
    Create a memoryview object from an object that defines the new buffer
    interface.
 
 
-.. cfunction:: PyObject *PyMemoryView_FromBuffer(Py_buffer *view)
+.. c:function:: PyObject *PyMemoryView_FromBuffer(Py_buffer *view)
 
    Create a memoryview object wrapping the given buffer-info structure *view*.
    The memoryview object then owns the buffer, which means you shouldn't
@@ -309,7 +309,7 @@
    memoryview object.
 
 
-.. cfunction:: PyObject *PyMemoryView_GetContiguous(PyObject *obj, int buffertype, char order)
+.. c:function:: PyObject *PyMemoryView_GetContiguous(PyObject *obj, int buffertype, char order)
 
    Create a memoryview object to a contiguous chunk of memory (in either
    'C' or 'F'ortran *order*) from an object that defines the buffer
@@ -318,13 +318,13 @@
    new bytes object.
 
 
-.. cfunction:: int PyMemoryView_Check(PyObject *obj)
+.. c:function:: int PyMemoryView_Check(PyObject *obj)
 
    Return true if the object *obj* is a memoryview object.  It is not
    currently allowed to create subclasses of :class:`memoryview`.
 
 
-.. cfunction:: Py_buffer *PyMemoryView_GET_BUFFER(PyObject *obj)
+.. c:function:: Py_buffer *PyMemoryView_GET_BUFFER(PyObject *obj)
 
    Return a pointer to the buffer-info structure wrapped by the given
    object.  The object **must** be a memoryview instance; this macro doesn't
@@ -337,7 +337,7 @@
 .. index:: single: PyBufferProcs
 
 More information on the old buffer interface is provided in the section
-:ref:`buffer-structs`, under the description for :ctype:`PyBufferProcs`.
+:ref:`buffer-structs`, under the description for :c:type:`PyBufferProcs`.
 
 A "buffer object" is defined in the :file:`bufferobject.h` header (included by
 :file:`Python.h`). These objects look very similar to string objects at the
@@ -356,36 +356,36 @@
 native, in-memory format.
 
 
-.. ctype:: PyBufferObject
+.. c:type:: PyBufferObject
 
-   This subtype of :ctype:`PyObject` represents a buffer object.
+   This subtype of :c:type:`PyObject` represents a buffer object.
 
 
-.. cvar:: PyTypeObject PyBuffer_Type
+.. c:var:: PyTypeObject PyBuffer_Type
 
    .. index:: single: BufferType (in module types)
 
-   The instance of :ctype:`PyTypeObject` which represents the Python buffer type;
+   The instance of :c:type:`PyTypeObject` which represents the Python buffer type;
    it is the same object as ``buffer`` and  ``types.BufferType`` in the Python
    layer. .
 
 
-.. cvar:: int Py_END_OF_BUFFER
+.. c:var:: int Py_END_OF_BUFFER
 
    This constant may be passed as the *size* parameter to
-   :cfunc:`PyBuffer_FromObject` or :cfunc:`PyBuffer_FromReadWriteObject`.  It
-   indicates that the new :ctype:`PyBufferObject` should refer to *base*
+   :c:func:`PyBuffer_FromObject` or :c:func:`PyBuffer_FromReadWriteObject`.  It
+   indicates that the new :c:type:`PyBufferObject` should refer to *base*
    object from the specified *offset* to the end of its exported buffer.
    Using this enables the caller to avoid querying the *base* object for its
    length.
 
 
-.. cfunction:: int PyBuffer_Check(PyObject *p)
+.. c:function:: int PyBuffer_Check(PyObject *p)
 
-   Return true if the argument has type :cdata:`PyBuffer_Type`.
+   Return true if the argument has type :c:data:`PyBuffer_Type`.
 
 
-.. cfunction:: PyObject* PyBuffer_FromObject(PyObject *base, Py_ssize_t offset, Py_ssize_t size)
+.. c:function:: PyObject* PyBuffer_FromObject(PyObject *base, Py_ssize_t offset, Py_ssize_t size)
 
    Return a new read-only buffer object.  This raises :exc:`TypeError` if
    *base* doesn't support the read-only buffer protocol or doesn't provide
@@ -397,24 +397,24 @@
    length of the *base* object's exported buffer data.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *offset* and *size*. This
+      This function used an :c:type:`int` type for *offset* and *size*. This
       might require changes in your code for properly supporting 64-bit
       systems.
 
 
-.. cfunction:: PyObject* PyBuffer_FromReadWriteObject(PyObject *base, Py_ssize_t offset, Py_ssize_t size)
+.. c:function:: PyObject* PyBuffer_FromReadWriteObject(PyObject *base, Py_ssize_t offset, Py_ssize_t size)
 
    Return a new writable buffer object.  Parameters and exceptions are similar
-   to those for :cfunc:`PyBuffer_FromObject`.  If the *base* object does not
+   to those for :c:func:`PyBuffer_FromObject`.  If the *base* object does not
    export the writeable buffer protocol, then :exc:`TypeError` is raised.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *offset* and *size*. This
+      This function used an :c:type:`int` type for *offset* and *size*. This
       might require changes in your code for properly supporting 64-bit
       systems.
 
 
-.. cfunction:: PyObject* PyBuffer_FromMemory(void *ptr, Py_ssize_t size)
+.. c:function:: PyObject* PyBuffer_FromMemory(void *ptr, Py_ssize_t size)
 
    Return a new read-only buffer object that reads from a specified location
    in memory, with a specified size.  The caller is responsible for ensuring
@@ -424,27 +424,27 @@
    *size* parameter; :exc:`ValueError` will be raised in that case.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyBuffer_FromReadWriteMemory(void *ptr, Py_ssize_t size)
+.. c:function:: PyObject* PyBuffer_FromReadWriteMemory(void *ptr, Py_ssize_t size)
 
-   Similar to :cfunc:`PyBuffer_FromMemory`, but the returned buffer is
+   Similar to :c:func:`PyBuffer_FromMemory`, but the returned buffer is
    writable.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyBuffer_New(Py_ssize_t size)
+.. c:function:: PyObject* PyBuffer_New(Py_ssize_t size)
 
    Return a new writable buffer object that maintains its own memory buffer of
    *size* bytes.  :exc:`ValueError` is returned if *size* is not zero or
    positive.  Note that the memory buffer (as returned by
-   :cfunc:`PyObject_AsWriteBuffer`) is not specifically aligned.
+   :c:func:`PyObject_AsWriteBuffer`) is not specifically aligned.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
diff --git a/Doc/c-api/bytearray.rst b/Doc/c-api/bytearray.rst
index a605091..858c8db 100644
--- a/Doc/c-api/bytearray.rst
+++ b/Doc/c-api/bytearray.rst
@@ -10,26 +10,26 @@
 .. versionadded:: 2.6
 
 
-.. ctype:: PyByteArrayObject
+.. c:type:: PyByteArrayObject
 
-   This subtype of :ctype:`PyObject` represents a Python bytearray object.
+   This subtype of :c:type:`PyObject` represents a Python bytearray object.
 
 
-.. cvar:: PyTypeObject PyByteArray_Type
+.. c:var:: PyTypeObject PyByteArray_Type
 
-   This instance of :ctype:`PyTypeObject` represents the Python bytearray type;
+   This instance of :c:type:`PyTypeObject` represents the Python bytearray type;
    it is the same object as ``bytearray`` in the Python layer.
 
 Type check macros
 ^^^^^^^^^^^^^^^^^
 
-.. cfunction:: int PyByteArray_Check(PyObject *o)
+.. c:function:: int PyByteArray_Check(PyObject *o)
 
    Return true if the object *o* is a bytearray object or an instance of a
    subtype of the bytearray type.
 
 
-.. cfunction:: int PyByteArray_CheckExact(PyObject *o)
+.. c:function:: int PyByteArray_CheckExact(PyObject *o)
 
    Return true if the object *o* is a bytearray object, but not an instance of a
    subtype of the bytearray type.
@@ -38,7 +38,7 @@
 Direct API functions
 ^^^^^^^^^^^^^^^^^^^^
 
-.. cfunction:: PyObject* PyByteArray_FromObject(PyObject *o)
+.. c:function:: PyObject* PyByteArray_FromObject(PyObject *o)
 
    Return a new bytearray object from any object, *o*, that implements the
    buffer protocol.
@@ -46,29 +46,29 @@
    .. XXX expand about the buffer protocol, at least somewhere
 
 
-.. cfunction:: PyObject* PyByteArray_FromStringAndSize(const char *string, Py_ssize_t len)
+.. c:function:: PyObject* PyByteArray_FromStringAndSize(const char *string, Py_ssize_t len)
 
    Create a new bytearray object from *string* and its length, *len*.  On
    failure, *NULL* is returned.
 
 
-.. cfunction:: PyObject* PyByteArray_Concat(PyObject *a, PyObject *b)
+.. c:function:: PyObject* PyByteArray_Concat(PyObject *a, PyObject *b)
 
    Concat bytearrays *a* and *b* and return a new bytearray with the result.
 
 
-.. cfunction:: Py_ssize_t PyByteArray_Size(PyObject *bytearray)
+.. c:function:: Py_ssize_t PyByteArray_Size(PyObject *bytearray)
 
    Return the size of *bytearray* after checking for a *NULL* pointer.
 
 
-.. cfunction:: char* PyByteArray_AsString(PyObject *bytearray)
+.. c:function:: char* PyByteArray_AsString(PyObject *bytearray)
 
    Return the contents of *bytearray* as a char array after checking for a
    *NULL* pointer.
 
 
-.. cfunction:: int PyByteArray_Resize(PyObject *bytearray, Py_ssize_t len)
+.. c:function:: int PyByteArray_Resize(PyObject *bytearray, Py_ssize_t len)
 
    Resize the internal buffer of *bytearray* to *len*.
 
@@ -77,11 +77,11 @@
 
 These macros trade safety for speed and they don't check pointers.
 
-.. cfunction:: char* PyByteArray_AS_STRING(PyObject *bytearray)
+.. c:function:: char* PyByteArray_AS_STRING(PyObject *bytearray)
 
-   Macro version of :cfunc:`PyByteArray_AsString`.
+   Macro version of :c:func:`PyByteArray_AsString`.
 
 
-.. cfunction:: Py_ssize_t PyByteArray_GET_SIZE(PyObject *bytearray)
+.. c:function:: Py_ssize_t PyByteArray_GET_SIZE(PyObject *bytearray)
 
-   Macro version of :cfunc:`PyByteArray_Size`.
+   Macro version of :c:func:`PyByteArray_Size`.
diff --git a/Doc/c-api/capsule.rst b/Doc/c-api/capsule.rst
index 2939314..6f6250f 100644
--- a/Doc/c-api/capsule.rst
+++ b/Doc/c-api/capsule.rst
@@ -10,33 +10,33 @@
 Refer to :ref:`using-capsules` for more information on using these objects.
 
 
-.. ctype:: PyCapsule
+.. c:type:: PyCapsule
 
-   This subtype of :ctype:`PyObject` represents an opaque value, useful for C
-   extension modules who need to pass an opaque value (as a :ctype:`void\*`
+   This subtype of :c:type:`PyObject` represents an opaque value, useful for C
+   extension modules who need to pass an opaque value (as a :c:type:`void\*`
    pointer) through Python code to other C code.  It is often used to make a C
    function pointer defined in one module available to other modules, so the
    regular import mechanism can be used to access C APIs defined in dynamically
    loaded modules.
 
-.. ctype:: PyCapsule_Destructor
+.. c:type:: PyCapsule_Destructor
 
    The type of a destructor callback for a capsule.  Defined as::
 
       typedef void (*PyCapsule_Destructor)(PyObject *);
 
-   See :cfunc:`PyCapsule_New` for the semantics of PyCapsule_Destructor
+   See :c:func:`PyCapsule_New` for the semantics of PyCapsule_Destructor
    callbacks.
 
 
-.. cfunction:: int PyCapsule_CheckExact(PyObject *p)
+.. c:function:: int PyCapsule_CheckExact(PyObject *p)
 
-   Return true if its argument is a :ctype:`PyCapsule`.
+   Return true if its argument is a :c:type:`PyCapsule`.
 
 
-.. cfunction:: PyObject* PyCapsule_New(void *pointer, const char *name, PyCapsule_Destructor destructor)
+.. c:function:: PyObject* PyCapsule_New(void *pointer, const char *name, PyCapsule_Destructor destructor)
 
-   Create a :ctype:`PyCapsule` encapsulating the *pointer*.  The *pointer*
+   Create a :c:type:`PyCapsule` encapsulating the *pointer*.  The *pointer*
    argument may not be *NULL*.
 
    On failure, set an exception and return *NULL*.
@@ -50,91 +50,91 @@
 
    If this capsule will be stored as an attribute of a module, the *name* should
    be specified as ``modulename.attributename``.  This will enable other modules
-   to import the capsule using :cfunc:`PyCapsule_Import`.
+   to import the capsule using :c:func:`PyCapsule_Import`.
 
 
-.. cfunction:: void* PyCapsule_GetPointer(PyObject *capsule, const char *name)
+.. c:function:: void* PyCapsule_GetPointer(PyObject *capsule, const char *name)
 
    Retrieve the *pointer* stored in the capsule.  On failure, set an exception
    and return *NULL*.
 
    The *name* parameter must compare exactly to the name stored in the capsule.
    If the name stored in the capsule is *NULL*, the *name* passed in must also
-   be *NULL*.  Python uses the C function :cfunc:`strcmp` to compare capsule
+   be *NULL*.  Python uses the C function :c:func:`strcmp` to compare capsule
    names.
 
 
-.. cfunction:: PyCapsule_Destructor PyCapsule_GetDestructor(PyObject *capsule)
+.. c:function:: PyCapsule_Destructor PyCapsule_GetDestructor(PyObject *capsule)
 
    Return the current destructor stored in the capsule.  On failure, set an
    exception and return *NULL*.
 
    It is legal for a capsule to have a *NULL* destructor.  This makes a *NULL*
-   return code somewhat ambiguous; use :cfunc:`PyCapsule_IsValid` or
-   :cfunc:`PyErr_Occurred` to disambiguate.
+   return code somewhat ambiguous; use :c:func:`PyCapsule_IsValid` or
+   :c:func:`PyErr_Occurred` to disambiguate.
 
 
-.. cfunction:: void* PyCapsule_GetContext(PyObject *capsule)
+.. c:function:: void* PyCapsule_GetContext(PyObject *capsule)
 
    Return the current context stored in the capsule.  On failure, set an
    exception and return *NULL*.
 
    It is legal for a capsule to have a *NULL* context.  This makes a *NULL*
-   return code somewhat ambiguous; use :cfunc:`PyCapsule_IsValid` or
-   :cfunc:`PyErr_Occurred` to disambiguate.
+   return code somewhat ambiguous; use :c:func:`PyCapsule_IsValid` or
+   :c:func:`PyErr_Occurred` to disambiguate.
 
 
-.. cfunction:: const char* PyCapsule_GetName(PyObject *capsule)
+.. c:function:: const char* PyCapsule_GetName(PyObject *capsule)
 
    Return the current name stored in the capsule.  On failure, set an exception
    and return *NULL*.
 
    It is legal for a capsule to have a *NULL* name.  This makes a *NULL* return
-   code somewhat ambiguous; use :cfunc:`PyCapsule_IsValid` or
-   :cfunc:`PyErr_Occurred` to disambiguate.
+   code somewhat ambiguous; use :c:func:`PyCapsule_IsValid` or
+   :c:func:`PyErr_Occurred` to disambiguate.
 
 
-.. cfunction:: void* PyCapsule_Import(const char *name, int no_block)
+.. c:function:: void* PyCapsule_Import(const char *name, int no_block)
 
    Import a pointer to a C object from a capsule attribute in a module.  The
    *name* parameter should specify the full name to the attribute, as in
    ``module.attribute``.  The *name* stored in the capsule must match this
    string exactly.  If *no_block* is true, import the module without blocking
-   (using :cfunc:`PyImport_ImportModuleNoBlock`).  If *no_block* is false,
-   import the module conventionally (using :cfunc:`PyImport_ImportModule`).
+   (using :c:func:`PyImport_ImportModuleNoBlock`).  If *no_block* is false,
+   import the module conventionally (using :c:func:`PyImport_ImportModule`).
 
    Return the capsule's internal *pointer* on success.  On failure, set an
-   exception and return *NULL*.  However, if :cfunc:`PyCapsule_Import` failed to
+   exception and return *NULL*.  However, if :c:func:`PyCapsule_Import` failed to
    import the module, and *no_block* was true, no exception is set.
 
-.. cfunction:: int PyCapsule_IsValid(PyObject *capsule, const char *name)
+.. c:function:: int PyCapsule_IsValid(PyObject *capsule, const char *name)
 
    Determines whether or not *capsule* is a valid capsule.  A valid capsule is
-   non-*NULL*, passes :cfunc:`PyCapsule_CheckExact`, has a non-*NULL* pointer
+   non-*NULL*, passes :c:func:`PyCapsule_CheckExact`, has a non-*NULL* pointer
    stored in it, and its internal name matches the *name* parameter.  (See
-   :cfunc:`PyCapsule_GetPointer` for information on how capsule names are
+   :c:func:`PyCapsule_GetPointer` for information on how capsule names are
    compared.)
 
-   In other words, if :cfunc:`PyCapsule_IsValid` returns a true value, calls to
-   any of the accessors (any function starting with :cfunc:`PyCapsule_Get`) are
+   In other words, if :c:func:`PyCapsule_IsValid` returns a true value, calls to
+   any of the accessors (any function starting with :c:func:`PyCapsule_Get`) are
    guaranteed to succeed.
 
    Return a nonzero value if the object is valid and matches the name passed in.
    Return 0 otherwise.  This function will not fail.
 
-.. cfunction:: int PyCapsule_SetContext(PyObject *capsule, void *context)
+.. c:function:: int PyCapsule_SetContext(PyObject *capsule, void *context)
 
    Set the context pointer inside *capsule* to *context*.
 
    Return 0 on success.  Return nonzero and set an exception on failure.
 
-.. cfunction:: int PyCapsule_SetDestructor(PyObject *capsule, PyCapsule_Destructor destructor)
+.. c:function:: int PyCapsule_SetDestructor(PyObject *capsule, PyCapsule_Destructor destructor)
 
    Set the destructor inside *capsule* to *destructor*.
 
    Return 0 on success.  Return nonzero and set an exception on failure.
 
-.. cfunction:: int PyCapsule_SetName(PyObject *capsule, const char *name)
+.. c:function:: int PyCapsule_SetName(PyObject *capsule, const char *name)
 
    Set the name inside *capsule* to *name*.  If non-*NULL*, the name must
    outlive the capsule.  If the previous *name* stored in the capsule was not
@@ -142,7 +142,7 @@
 
    Return 0 on success.  Return nonzero and set an exception on failure.
 
-.. cfunction:: int PyCapsule_SetPointer(PyObject *capsule, void *pointer)
+.. c:function:: int PyCapsule_SetPointer(PyObject *capsule, void *pointer)
 
    Set the void pointer inside *capsule* to *pointer*.  The pointer may not be
    *NULL*.
diff --git a/Doc/c-api/cell.rst b/Doc/c-api/cell.rst
index 3562ed9..427259c 100644
--- a/Doc/c-api/cell.rst
+++ b/Doc/c-api/cell.rst
@@ -15,39 +15,39 @@
 Cell objects are not likely to be useful elsewhere.
 
 
-.. ctype:: PyCellObject
+.. c:type:: PyCellObject
 
    The C structure used for cell objects.
 
 
-.. cvar:: PyTypeObject PyCell_Type
+.. c:var:: PyTypeObject PyCell_Type
 
    The type object corresponding to cell objects.
 
 
-.. cfunction:: int PyCell_Check(ob)
+.. c:function:: int PyCell_Check(ob)
 
    Return true if *ob* is a cell object; *ob* must not be *NULL*.
 
 
-.. cfunction:: PyObject* PyCell_New(PyObject *ob)
+.. c:function:: PyObject* PyCell_New(PyObject *ob)
 
    Create and return a new cell object containing the value *ob*. The parameter may
    be *NULL*.
 
 
-.. cfunction:: PyObject* PyCell_Get(PyObject *cell)
+.. c:function:: PyObject* PyCell_Get(PyObject *cell)
 
    Return the contents of the cell *cell*.
 
 
-.. cfunction:: PyObject* PyCell_GET(PyObject *cell)
+.. c:function:: PyObject* PyCell_GET(PyObject *cell)
 
    Return the contents of the cell *cell*, but without checking that *cell* is
    non-*NULL* and a cell object.
 
 
-.. cfunction:: int PyCell_Set(PyObject *cell, PyObject *value)
+.. c:function:: int PyCell_Set(PyObject *cell, PyObject *value)
 
    Set the contents of the cell object *cell* to *value*.  This releases the
    reference to any current content of the cell. *value* may be *NULL*.  *cell*
@@ -55,7 +55,7 @@
    success, ``0`` will be returned.
 
 
-.. cfunction:: void PyCell_SET(PyObject *cell, PyObject *value)
+.. c:function:: void PyCell_SET(PyObject *cell, PyObject *value)
 
    Sets the value of the cell object *cell* to *value*.  No reference counts are
    adjusted, and no checks are made for safety; *cell* must be non-*NULL* and must
diff --git a/Doc/c-api/class.rst b/Doc/c-api/class.rst
index 576af38..4dbe508 100644
--- a/Doc/c-api/class.rst
+++ b/Doc/c-api/class.rst
@@ -12,12 +12,12 @@
 will want to work with type objects (section :ref:`typeobjects`).
 
 
-.. ctype:: PyClassObject
+.. c:type:: PyClassObject
 
    The C structure of the objects used to describe built-in classes.
 
 
-.. cvar:: PyObject* PyClass_Type
+.. c:var:: PyObject* PyClass_Type
 
    .. index:: single: ClassType (in module types)
 
@@ -25,13 +25,13 @@
    ``types.ClassType`` in the Python layer.
 
 
-.. cfunction:: int PyClass_Check(PyObject *o)
+.. c:function:: int PyClass_Check(PyObject *o)
 
    Return true if the object *o* is a class object, including instances of types
    derived from the standard class object.  Return false in all other cases.
 
 
-.. cfunction:: int PyClass_IsSubclass(PyObject *klass, PyObject *base)
+.. c:function:: int PyClass_IsSubclass(PyObject *klass, PyObject *base)
 
    Return true if *klass* is a subclass of *base*. Return false in all other cases.
 
@@ -41,23 +41,23 @@
 There are very few functions specific to instance objects.
 
 
-.. cvar:: PyTypeObject PyInstance_Type
+.. c:var:: PyTypeObject PyInstance_Type
 
    Type object for class instances.
 
 
-.. cfunction:: int PyInstance_Check(PyObject *obj)
+.. c:function:: int PyInstance_Check(PyObject *obj)
 
    Return true if *obj* is an instance.
 
 
-.. cfunction:: PyObject* PyInstance_New(PyObject *class, PyObject *arg, PyObject *kw)
+.. c:function:: PyObject* PyInstance_New(PyObject *class, PyObject *arg, PyObject *kw)
 
    Create a new instance of a specific class.  The parameters *arg* and *kw* are
    used as the positional and keyword parameters to the object's constructor.
 
 
-.. cfunction:: PyObject* PyInstance_NewRaw(PyObject *class, PyObject *dict)
+.. c:function:: PyObject* PyInstance_NewRaw(PyObject *class, PyObject *dict)
 
    Create a new instance of a specific class without calling its constructor.
    *class* is the class of new object.  The *dict* parameter will be used as the
diff --git a/Doc/c-api/cobject.rst b/Doc/c-api/cobject.rst
index 73fbbf5..eafac0e 100644
--- a/Doc/c-api/cobject.rst
+++ b/Doc/c-api/cobject.rst
@@ -13,47 +13,47 @@
    The CObject API is deprecated as of Python 2.7.  Please switch to the new
    :ref:`capsules` API.
 
-.. ctype:: PyCObject
+.. c:type:: PyCObject
 
-   This subtype of :ctype:`PyObject` represents an opaque value, useful for C
-   extension modules who need to pass an opaque value (as a :ctype:`void\*`
+   This subtype of :c:type:`PyObject` represents an opaque value, useful for C
+   extension modules who need to pass an opaque value (as a :c:type:`void\*`
    pointer) through Python code to other C code.  It is often used to make a C
    function pointer defined in one module available to other modules, so the
    regular import mechanism can be used to access C APIs defined in dynamically
    loaded modules.
 
 
-.. cfunction:: int PyCObject_Check(PyObject *p)
+.. c:function:: int PyCObject_Check(PyObject *p)
 
-   Return true if its argument is a :ctype:`PyCObject`.
+   Return true if its argument is a :c:type:`PyCObject`.
 
 
-.. cfunction:: PyObject* PyCObject_FromVoidPtr(void* cobj, void (*destr)(void *))
+.. c:function:: PyObject* PyCObject_FromVoidPtr(void* cobj, void (*destr)(void *))
 
-   Create a :ctype:`PyCObject` from the ``void *`` *cobj*.  The *destr* function
+   Create a :c:type:`PyCObject` from the ``void *`` *cobj*.  The *destr* function
    will be called when the object is reclaimed, unless it is *NULL*.
 
 
-.. cfunction:: PyObject* PyCObject_FromVoidPtrAndDesc(void* cobj, void* desc, void (*destr)(void *, void *))
+.. c:function:: PyObject* PyCObject_FromVoidPtrAndDesc(void* cobj, void* desc, void (*destr)(void *, void *))
 
-   Create a :ctype:`PyCObject` from the :ctype:`void \*` *cobj*.  The *destr*
+   Create a :c:type:`PyCObject` from the :c:type:`void \*` *cobj*.  The *destr*
    function will be called when the object is reclaimed. The *desc* argument can
    be used to pass extra callback data for the destructor function.
 
 
-.. cfunction:: void* PyCObject_AsVoidPtr(PyObject* self)
+.. c:function:: void* PyCObject_AsVoidPtr(PyObject* self)
 
-   Return the object :ctype:`void \*` that the :ctype:`PyCObject` *self* was
+   Return the object :c:type:`void \*` that the :c:type:`PyCObject` *self* was
    created with.
 
 
-.. cfunction:: void* PyCObject_GetDesc(PyObject* self)
+.. c:function:: void* PyCObject_GetDesc(PyObject* self)
 
-   Return the description :ctype:`void \*` that the :ctype:`PyCObject` *self* was
+   Return the description :c:type:`void \*` that the :c:type:`PyCObject` *self* was
    created with.
 
 
-.. cfunction:: int PyCObject_SetVoidPtr(PyObject* self, void* cobj)
+.. c:function:: int PyCObject_SetVoidPtr(PyObject* self, void* cobj)
 
-   Set the void pointer inside *self* to *cobj*. The :ctype:`PyCObject` must not
+   Set the void pointer inside *self* to *cobj*. The :c:type:`PyCObject` must not
    have an associated destructor. Return true on success, false on failure.
diff --git a/Doc/c-api/code.rst b/Doc/c-api/code.rst
index c6ca8c5..7d9b4b6 100644
--- a/Doc/c-api/code.rst
+++ b/Doc/c-api/code.rst
@@ -15,35 +15,35 @@
 Each one represents a chunk of executable code that hasn't yet been
 bound into a function.
 
-.. ctype:: PyCodeObject
+.. c:type:: PyCodeObject
 
    The C structure of the objects used to describe code objects.  The
    fields of this type are subject to change at any time.
 
 
-.. cvar:: PyTypeObject PyCode_Type
+.. c:var:: PyTypeObject PyCode_Type
 
-   This is an instance of :ctype:`PyTypeObject` representing the Python
+   This is an instance of :c:type:`PyTypeObject` representing the Python
    :class:`code` type.
 
 
-.. cfunction:: int PyCode_Check(PyObject *co)
+.. c:function:: int PyCode_Check(PyObject *co)
 
    Return true if *co* is a :class:`code` object
 
-.. cfunction:: int PyCode_GetNumFree(PyObject *co)
+.. c:function:: int PyCode_GetNumFree(PyObject *co)
 
    Return the number of free variables in *co*.
 
-.. cfunction:: PyCodeObject *PyCode_New(int argcount, int nlocals, int stacksize, int flags, PyObject *code, PyObject *consts, PyObject *names, PyObject *varnames, PyObject *freevars, PyObject *cellvars, PyObject *filename, PyObject *name, int firstlineno, PyObject *lnotab)
+.. c:function:: PyCodeObject *PyCode_New(int argcount, int nlocals, int stacksize, int flags, PyObject *code, PyObject *consts, PyObject *names, PyObject *varnames, PyObject *freevars, PyObject *cellvars, PyObject *filename, PyObject *name, int firstlineno, PyObject *lnotab)
 
    Return a new code object.  If you need a dummy code object to
-   create a frame, use :cfunc:`PyCode_NewEmpty` instead.  Calling
-   :cfunc:`PyCode_New` directly can bind you to a precise Python
+   create a frame, use :c:func:`PyCode_NewEmpty` instead.  Calling
+   :c:func:`PyCode_New` directly can bind you to a precise Python
    version since the definition of the bytecode changes often.
 
 
-.. cfunction:: int PyCode_NewEmpty(const char *filename, const char *funcname, int firstlineno)
+.. c:function:: int PyCode_NewEmpty(const char *filename, const char *funcname, int firstlineno)
 
    Return a new empty code object with the specified filename,
    function name, and first line number.  It is illegal to
diff --git a/Doc/c-api/codec.rst b/Doc/c-api/codec.rst
index 2597d38..8207ae0 100644
--- a/Doc/c-api/codec.rst
+++ b/Doc/c-api/codec.rst
@@ -3,19 +3,19 @@
 Codec registry and support functions
 ====================================
 
-.. cfunction:: int PyCodec_Register(PyObject *search_function)
+.. c:function:: int PyCodec_Register(PyObject *search_function)
 
    Register a new codec search function.
 
    As side effect, this tries to load the :mod:`encodings` package, if not yet
    done, to make sure that it is always first in the list of search functions.
 
-.. cfunction:: int PyCodec_KnownEncoding(const char *encoding)
+.. c:function:: int PyCodec_KnownEncoding(const char *encoding)
 
    Return ``1`` or ``0`` depending on whether there is a registered codec for
    the given *encoding*.
 
-.. cfunction:: PyObject* PyCodec_Encode(PyObject *object, const char *encoding, const char *errors)
+.. c:function:: PyObject* PyCodec_Encode(PyObject *object, const char *encoding, const char *errors)
 
    Generic codec based encoding API.
 
@@ -24,7 +24,7 @@
    be *NULL* to use the default method defined for the codec.  Raises a
    :exc:`LookupError` if no encoder can be found.
 
-.. cfunction:: PyObject* PyCodec_Decode(PyObject *object, const char *encoding, const char *errors)
+.. c:function:: PyObject* PyCodec_Decode(PyObject *object, const char *encoding, const char *errors)
 
    Generic codec based decoding API.
 
@@ -42,27 +42,27 @@
 effectively case-insensitive.  If no codec is found, a :exc:`KeyError` is set
 and *NULL* returned.
 
-.. cfunction:: PyObject* PyCodec_Encoder(const char *encoding)
+.. c:function:: PyObject* PyCodec_Encoder(const char *encoding)
 
    Get an encoder function for the given *encoding*.
 
-.. cfunction:: PyObject* PyCodec_Decoder(const char *encoding)
+.. c:function:: PyObject* PyCodec_Decoder(const char *encoding)
 
    Get a decoder function for the given *encoding*.
 
-.. cfunction:: PyObject* PyCodec_IncrementalEncoder(const char *encoding, const char *errors)
+.. c:function:: PyObject* PyCodec_IncrementalEncoder(const char *encoding, const char *errors)
 
    Get an :class:`IncrementalEncoder` object for the given *encoding*.
 
-.. cfunction:: PyObject* PyCodec_IncrementalDecoder(const char *encoding, const char *errors)
+.. c:function:: PyObject* PyCodec_IncrementalDecoder(const char *encoding, const char *errors)
 
    Get an :class:`IncrementalDecoder` object for the given *encoding*.
 
-.. cfunction:: PyObject* PyCodec_StreamReader(const char *encoding, PyObject *stream, const char *errors)
+.. c:function:: PyObject* PyCodec_StreamReader(const char *encoding, PyObject *stream, const char *errors)
 
    Get a :class:`StreamReader` factory function for the given *encoding*.
 
-.. cfunction:: PyObject* PyCodec_StreamWriter(const char *encoding, PyObject *stream, const char *errors)
+.. c:function:: PyObject* PyCodec_StreamWriter(const char *encoding, PyObject *stream, const char *errors)
 
    Get a :class:`StreamWriter` factory function for the given *encoding*.
 
@@ -70,7 +70,7 @@
 Registry API for Unicode encoding error handlers
 ------------------------------------------------
 
-.. cfunction:: int PyCodec_RegisterError(const char *name, PyObject *error)
+.. c:function:: int PyCodec_RegisterError(const char *name, PyObject *error)
 
    Register the error handling callback function *error* under the given *name*.
    This callback function will be called by a codec when it encounters
@@ -89,29 +89,29 @@
 
    Return ``0`` on success, ``-1`` on error.
 
-.. cfunction:: PyObject* PyCodec_LookupError(const char *name)
+.. c:function:: PyObject* PyCodec_LookupError(const char *name)
 
    Lookup the error handling callback function registered under *name*.  As a
    special case *NULL* can be passed, in which case the error handling callback
    for "strict" will be returned.
 
-.. cfunction:: PyObject* PyCodec_StrictErrors(PyObject *exc)
+.. c:function:: PyObject* PyCodec_StrictErrors(PyObject *exc)
 
    Raise *exc* as an exception.
 
-.. cfunction:: PyObject* PyCodec_IgnoreErrors(PyObject *exc)
+.. c:function:: PyObject* PyCodec_IgnoreErrors(PyObject *exc)
 
    Ignore the unicode error, skipping the faulty input.
 
-.. cfunction:: PyObject* PyCodec_ReplaceErrors(PyObject *exc)
+.. c:function:: PyObject* PyCodec_ReplaceErrors(PyObject *exc)
 
    Replace the unicode encode error with ``?`` or ``U+FFFD``.
 
-.. cfunction:: PyObject* PyCodec_XMLCharRefReplaceErrors(PyObject *exc)
+.. c:function:: PyObject* PyCodec_XMLCharRefReplaceErrors(PyObject *exc)
 
    Replace the unicode encode error with XML character references.
 
-.. cfunction:: PyObject* PyCodec_BackslashReplaceErrors(PyObject *exc)
+.. c:function:: PyObject* PyCodec_BackslashReplaceErrors(PyObject *exc)
 
    Replace the unicode encode error with backslash escapes (``\x``, ``\u`` and
    ``\U``).
diff --git a/Doc/c-api/complex.rst b/Doc/c-api/complex.rst
index 90e9c03..2547c1c 100644
--- a/Doc/c-api/complex.rst
+++ b/Doc/c-api/complex.rst
@@ -21,7 +21,7 @@
 pointers.  This is consistent throughout the API.
 
 
-.. ctype:: Py_complex
+.. c:type:: Py_complex
 
    The C structure which corresponds to the value portion of a Python complex
    number object.  Most of the functions for dealing with complex number objects
@@ -34,103 +34,103 @@
       } Py_complex;
 
 
-.. cfunction:: Py_complex _Py_c_sum(Py_complex left, Py_complex right)
+.. c:function:: Py_complex _Py_c_sum(Py_complex left, Py_complex right)
 
-   Return the sum of two complex numbers, using the C :ctype:`Py_complex`
+   Return the sum of two complex numbers, using the C :c:type:`Py_complex`
    representation.
 
 
-.. cfunction:: Py_complex _Py_c_diff(Py_complex left, Py_complex right)
+.. c:function:: Py_complex _Py_c_diff(Py_complex left, Py_complex right)
 
    Return the difference between two complex numbers, using the C
-   :ctype:`Py_complex` representation.
+   :c:type:`Py_complex` representation.
 
 
-.. cfunction:: Py_complex _Py_c_neg(Py_complex complex)
+.. c:function:: Py_complex _Py_c_neg(Py_complex complex)
 
    Return the negation of the complex number *complex*, using the C
-   :ctype:`Py_complex` representation.
+   :c:type:`Py_complex` representation.
 
 
-.. cfunction:: Py_complex _Py_c_prod(Py_complex left, Py_complex right)
+.. c:function:: Py_complex _Py_c_prod(Py_complex left, Py_complex right)
 
-   Return the product of two complex numbers, using the C :ctype:`Py_complex`
+   Return the product of two complex numbers, using the C :c:type:`Py_complex`
    representation.
 
 
-.. cfunction:: Py_complex _Py_c_quot(Py_complex dividend, Py_complex divisor)
+.. c:function:: Py_complex _Py_c_quot(Py_complex dividend, Py_complex divisor)
 
-   Return the quotient of two complex numbers, using the C :ctype:`Py_complex`
+   Return the quotient of two complex numbers, using the C :c:type:`Py_complex`
    representation.
 
    If *divisor* is null, this method returns zero and sets
-   :cdata:`errno` to :cdata:`EDOM`.
+   :c:data:`errno` to :c:data:`EDOM`.
 
 
-.. cfunction:: Py_complex _Py_c_pow(Py_complex num, Py_complex exp)
+.. c:function:: Py_complex _Py_c_pow(Py_complex num, Py_complex exp)
 
-   Return the exponentiation of *num* by *exp*, using the C :ctype:`Py_complex`
+   Return the exponentiation of *num* by *exp*, using the C :c:type:`Py_complex`
    representation.
 
    If *num* is null and *exp* is not a positive real number,
-   this method returns zero and sets :cdata:`errno` to :cdata:`EDOM`.
+   this method returns zero and sets :c:data:`errno` to :c:data:`EDOM`.
 
 
 Complex Numbers as Python Objects
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 
-.. ctype:: PyComplexObject
+.. c:type:: PyComplexObject
 
-   This subtype of :ctype:`PyObject` represents a Python complex number object.
+   This subtype of :c:type:`PyObject` represents a Python complex number object.
 
 
-.. cvar:: PyTypeObject PyComplex_Type
+.. c:var:: PyTypeObject PyComplex_Type
 
-   This instance of :ctype:`PyTypeObject` represents the Python complex number
+   This instance of :c:type:`PyTypeObject` represents the Python complex number
    type. It is the same object as ``complex`` and ``types.ComplexType``.
 
 
-.. cfunction:: int PyComplex_Check(PyObject *p)
+.. c:function:: int PyComplex_Check(PyObject *p)
 
-   Return true if its argument is a :ctype:`PyComplexObject` or a subtype of
-   :ctype:`PyComplexObject`.
+   Return true if its argument is a :c:type:`PyComplexObject` or a subtype of
+   :c:type:`PyComplexObject`.
 
    .. versionchanged:: 2.2
       Allowed subtypes to be accepted.
 
 
-.. cfunction:: int PyComplex_CheckExact(PyObject *p)
+.. c:function:: int PyComplex_CheckExact(PyObject *p)
 
-   Return true if its argument is a :ctype:`PyComplexObject`, but not a subtype of
-   :ctype:`PyComplexObject`.
+   Return true if its argument is a :c:type:`PyComplexObject`, but not a subtype of
+   :c:type:`PyComplexObject`.
 
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyObject* PyComplex_FromCComplex(Py_complex v)
+.. c:function:: PyObject* PyComplex_FromCComplex(Py_complex v)
 
-   Create a new Python complex number object from a C :ctype:`Py_complex` value.
+   Create a new Python complex number object from a C :c:type:`Py_complex` value.
 
 
-.. cfunction:: PyObject* PyComplex_FromDoubles(double real, double imag)
+.. c:function:: PyObject* PyComplex_FromDoubles(double real, double imag)
 
-   Return a new :ctype:`PyComplexObject` object from *real* and *imag*.
+   Return a new :c:type:`PyComplexObject` object from *real* and *imag*.
 
 
-.. cfunction:: double PyComplex_RealAsDouble(PyObject *op)
+.. c:function:: double PyComplex_RealAsDouble(PyObject *op)
 
-   Return the real part of *op* as a C :ctype:`double`.
+   Return the real part of *op* as a C :c:type:`double`.
 
 
-.. cfunction:: double PyComplex_ImagAsDouble(PyObject *op)
+.. c:function:: double PyComplex_ImagAsDouble(PyObject *op)
 
-   Return the imaginary part of *op* as a C :ctype:`double`.
+   Return the imaginary part of *op* as a C :c:type:`double`.
 
 
-.. cfunction:: Py_complex PyComplex_AsCComplex(PyObject *op)
+.. c:function:: Py_complex PyComplex_AsCComplex(PyObject *op)
 
-   Return the :ctype:`Py_complex` value of the complex number *op*.
+   Return the :c:type:`Py_complex` value of the complex number *op*.
    Upon failure, this method returns ``-1.0`` as a real value.
 
    .. versionchanged:: 2.6
diff --git a/Doc/c-api/concrete.rst b/Doc/c-api/concrete.rst
index 5ee611b..30eb78d 100644
--- a/Doc/c-api/concrete.rst
+++ b/Doc/c-api/concrete.rst
@@ -11,7 +11,7 @@
 Passing them an object of the wrong type is not a good idea; if you receive an
 object from a Python program and you are not sure that it has the right type,
 you must perform a type check first; for example, to check that an object is a
-dictionary, use :cfunc:`PyDict_Check`.  The chapter is structured like the
+dictionary, use :c:func:`PyDict_Check`.  The chapter is structured like the
 "family tree" of Python object types.
 
 .. warning::
diff --git a/Doc/c-api/conversion.rst b/Doc/c-api/conversion.rst
index b32100b..b987469 100644
--- a/Doc/c-api/conversion.rst
+++ b/Doc/c-api/conversion.rst
@@ -8,20 +8,20 @@
 Functions for number conversion and formatted string output.
 
 
-.. cfunction:: int PyOS_snprintf(char *str, size_t size,  const char *format, ...)
+.. c:function:: int PyOS_snprintf(char *str, size_t size,  const char *format, ...)
 
    Output not more than *size* bytes to *str* according to the format string
    *format* and the extra arguments. See the Unix man page :manpage:`snprintf(2)`.
 
 
-.. cfunction:: int PyOS_vsnprintf(char *str, size_t size, const char *format, va_list va)
+.. c:function:: int PyOS_vsnprintf(char *str, size_t size, const char *format, va_list va)
 
    Output not more than *size* bytes to *str* according to the format string
    *format* and the variable argument list *va*. Unix man page
    :manpage:`vsnprintf(2)`.
 
-:cfunc:`PyOS_snprintf` and :cfunc:`PyOS_vsnprintf` wrap the Standard C library
-functions :cfunc:`snprintf` and :cfunc:`vsnprintf`. Their purpose is to
+:c:func:`PyOS_snprintf` and :c:func:`PyOS_vsnprintf` wrap the Standard C library
+functions :c:func:`snprintf` and :c:func:`vsnprintf`. Their purpose is to
 guarantee consistent behavior in corner cases, which the Standard C functions do
 not.
 
@@ -30,7 +30,7 @@
 Both functions require that ``str != NULL``, ``size > 0`` and ``format !=
 NULL``.
 
-If the platform doesn't have :cfunc:`vsnprintf` and the buffer size needed to
+If the platform doesn't have :c:func:`vsnprintf` and the buffer size needed to
 avoid truncation exceeds *size* by more than 512 bytes, Python aborts with a
 *Py_FatalError*.
 
@@ -51,9 +51,9 @@
 The following functions provide locale-independent string to number conversions.
 
 
-.. cfunction:: double PyOS_string_to_double(const char *s, char **endptr, PyObject *overflow_exception)
+.. c:function:: double PyOS_string_to_double(const char *s, char **endptr, PyObject *overflow_exception)
 
-   Convert a string ``s`` to a :ctype:`double`, raising a Python
+   Convert a string ``s`` to a :c:type:`double`, raising a Python
    exception on failure.  The set of accepted strings corresponds to
    the set of strings accepted by Python's :func:`float` constructor,
    except that ``s`` must not have leading or trailing whitespace.
@@ -85,13 +85,13 @@
    .. versionadded:: 2.7
 
 
-.. cfunction:: double PyOS_ascii_strtod(const char *nptr, char **endptr)
+.. c:function:: double PyOS_ascii_strtod(const char *nptr, char **endptr)
 
-   Convert a string to a :ctype:`double`. This function behaves like the Standard C
-   function :cfunc:`strtod` does in the C locale. It does this without changing the
+   Convert a string to a :c:type:`double`. This function behaves like the Standard C
+   function :c:func:`strtod` does in the C locale. It does this without changing the
    current locale, since that would not be thread-safe.
 
-   :cfunc:`PyOS_ascii_strtod` should typically be used for reading configuration
+   :c:func:`PyOS_ascii_strtod` should typically be used for reading configuration
    files or other non-user input that should be locale independent.
 
    See the Unix man page :manpage:`strtod(2)` for details.
@@ -99,14 +99,14 @@
    .. versionadded:: 2.4
 
    .. deprecated:: 2.7
-      Use :cfunc:`PyOS_string_to_double` instead.
+      Use :c:func:`PyOS_string_to_double` instead.
 
 
 
-.. cfunction:: char* PyOS_ascii_formatd(char *buffer, size_t buf_len, const char *format, double d)
+.. c:function:: char* PyOS_ascii_formatd(char *buffer, size_t buf_len, const char *format, double d)
 
-   Convert a :ctype:`double` to a string using the ``'.'`` as the decimal
-   separator. *format* is a :cfunc:`printf`\ -style format string specifying the
+   Convert a :c:type:`double` to a string using the ``'.'`` as the decimal
+   separator. *format* is a :c:func:`printf`\ -style format string specifying the
    number format. Allowed conversion characters are ``'e'``, ``'E'``, ``'f'``,
    ``'F'``, ``'g'`` and ``'G'``.
 
@@ -119,9 +119,9 @@
       instead.
 
 
-.. cfunction:: char* PyOS_double_to_string(double val, char format_code, int precision, int flags, int *ptype)
+.. c:function:: char* PyOS_double_to_string(double val, char format_code, int precision, int flags, int *ptype)
 
-   Convert a :ctype:`double` *val* to a string using supplied
+   Convert a :c:type:`double` *val* to a string using supplied
    *format_code*, *precision*, and *flags*.
 
    *format_code* must be one of ``'e'``, ``'E'``, ``'f'``, ``'F'``,
@@ -139,7 +139,7 @@
      like an integer.
 
    * *Py_DTSF_ALT* means to apply "alternate" formatting rules.  See the
-     documentation for the :cfunc:`PyOS_snprintf` ``'#'`` specifier for
+     documentation for the :c:func:`PyOS_snprintf` ``'#'`` specifier for
      details.
 
    If *ptype* is non-NULL, then the value it points to will be set to one of
@@ -148,34 +148,34 @@
 
    The return value is a pointer to *buffer* with the converted string or
    *NULL* if the conversion failed. The caller is responsible for freeing the
-   returned string by calling :cfunc:`PyMem_Free`.
+   returned string by calling :c:func:`PyMem_Free`.
 
    .. versionadded:: 2.7
 
 
-.. cfunction:: double PyOS_ascii_atof(const char *nptr)
+.. c:function:: double PyOS_ascii_atof(const char *nptr)
 
-   Convert a string to a :ctype:`double` in a locale-independent way.
+   Convert a string to a :c:type:`double` in a locale-independent way.
 
    See the Unix man page :manpage:`atof(2)` for details.
 
    .. versionadded:: 2.4
 
    .. deprecated:: 3.1
-      Use :cfunc:`PyOS_string_to_double` instead.
+      Use :c:func:`PyOS_string_to_double` instead.
 
 
-.. cfunction:: char* PyOS_stricmp(char *s1, char *s2)
+.. c:function:: char* PyOS_stricmp(char *s1, char *s2)
 
    Case insensitive comparison of strings. The function works almost
-   identically to :cfunc:`strcmp` except that it ignores the case.
+   identically to :c:func:`strcmp` except that it ignores the case.
 
    .. versionadded:: 2.6
 
 
-.. cfunction:: char* PyOS_strnicmp(char *s1, char *s2, Py_ssize_t  size)
+.. c:function:: char* PyOS_strnicmp(char *s1, char *s2, Py_ssize_t  size)
 
    Case insensitive comparison of strings. The function works almost
-   identically to :cfunc:`strncmp` except that it ignores the case.
+   identically to :c:func:`strncmp` except that it ignores the case.
 
    .. versionadded:: 2.6
diff --git a/Doc/c-api/datetime.rst b/Doc/c-api/datetime.rst
index 0e9b376..e2d832c 100644
--- a/Doc/c-api/datetime.rst
+++ b/Doc/c-api/datetime.rst
@@ -8,89 +8,89 @@
 Various date and time objects are supplied by the :mod:`datetime` module.
 Before using any of these functions, the header file :file:`datetime.h` must be
 included in your source (note that this is not included by :file:`Python.h`),
-and the macro :cmacro:`PyDateTime_IMPORT` must be invoked, usually as part of
+and the macro :c:macro:`PyDateTime_IMPORT` must be invoked, usually as part of
 the module initialisation function.  The macro puts a pointer to a C structure
-into a static variable, :cdata:`PyDateTimeAPI`, that is used by the following
+into a static variable, :c:data:`PyDateTimeAPI`, that is used by the following
 macros.
 
 Type-check macros:
 
 
-.. cfunction:: int PyDate_Check(PyObject *ob)
+.. c:function:: int PyDate_Check(PyObject *ob)
 
-   Return true if *ob* is of type :cdata:`PyDateTime_DateType` or a subtype of
-   :cdata:`PyDateTime_DateType`.  *ob* must not be *NULL*.
+   Return true if *ob* is of type :c:data:`PyDateTime_DateType` or a subtype of
+   :c:data:`PyDateTime_DateType`.  *ob* must not be *NULL*.
 
    .. versionadded:: 2.4
 
 
-.. cfunction:: int PyDate_CheckExact(PyObject *ob)
+.. c:function:: int PyDate_CheckExact(PyObject *ob)
 
-   Return true if *ob* is of type :cdata:`PyDateTime_DateType`. *ob* must not be
+   Return true if *ob* is of type :c:data:`PyDateTime_DateType`. *ob* must not be
    *NULL*.
 
    .. versionadded:: 2.4
 
 
-.. cfunction:: int PyDateTime_Check(PyObject *ob)
+.. c:function:: int PyDateTime_Check(PyObject *ob)
 
-   Return true if *ob* is of type :cdata:`PyDateTime_DateTimeType` or a subtype of
-   :cdata:`PyDateTime_DateTimeType`.  *ob* must not be *NULL*.
+   Return true if *ob* is of type :c:data:`PyDateTime_DateTimeType` or a subtype of
+   :c:data:`PyDateTime_DateTimeType`.  *ob* must not be *NULL*.
 
    .. versionadded:: 2.4
 
 
-.. cfunction:: int PyDateTime_CheckExact(PyObject *ob)
+.. c:function:: int PyDateTime_CheckExact(PyObject *ob)
 
-   Return true if *ob* is of type :cdata:`PyDateTime_DateTimeType`. *ob* must not
+   Return true if *ob* is of type :c:data:`PyDateTime_DateTimeType`. *ob* must not
    be *NULL*.
 
    .. versionadded:: 2.4
 
 
-.. cfunction:: int PyTime_Check(PyObject *ob)
+.. c:function:: int PyTime_Check(PyObject *ob)
 
-   Return true if *ob* is of type :cdata:`PyDateTime_TimeType` or a subtype of
-   :cdata:`PyDateTime_TimeType`.  *ob* must not be *NULL*.
+   Return true if *ob* is of type :c:data:`PyDateTime_TimeType` or a subtype of
+   :c:data:`PyDateTime_TimeType`.  *ob* must not be *NULL*.
 
    .. versionadded:: 2.4
 
 
-.. cfunction:: int PyTime_CheckExact(PyObject *ob)
+.. c:function:: int PyTime_CheckExact(PyObject *ob)
 
-   Return true if *ob* is of type :cdata:`PyDateTime_TimeType`. *ob* must not be
+   Return true if *ob* is of type :c:data:`PyDateTime_TimeType`. *ob* must not be
    *NULL*.
 
    .. versionadded:: 2.4
 
 
-.. cfunction:: int PyDelta_Check(PyObject *ob)
+.. c:function:: int PyDelta_Check(PyObject *ob)
 
-   Return true if *ob* is of type :cdata:`PyDateTime_DeltaType` or a subtype of
-   :cdata:`PyDateTime_DeltaType`.  *ob* must not be *NULL*.
+   Return true if *ob* is of type :c:data:`PyDateTime_DeltaType` or a subtype of
+   :c:data:`PyDateTime_DeltaType`.  *ob* must not be *NULL*.
 
    .. versionadded:: 2.4
 
 
-.. cfunction:: int PyDelta_CheckExact(PyObject *ob)
+.. c:function:: int PyDelta_CheckExact(PyObject *ob)
 
-   Return true if *ob* is of type :cdata:`PyDateTime_DeltaType`. *ob* must not be
+   Return true if *ob* is of type :c:data:`PyDateTime_DeltaType`. *ob* must not be
    *NULL*.
 
    .. versionadded:: 2.4
 
 
-.. cfunction:: int PyTZInfo_Check(PyObject *ob)
+.. c:function:: int PyTZInfo_Check(PyObject *ob)
 
-   Return true if *ob* is of type :cdata:`PyDateTime_TZInfoType` or a subtype of
-   :cdata:`PyDateTime_TZInfoType`.  *ob* must not be *NULL*.
+   Return true if *ob* is of type :c:data:`PyDateTime_TZInfoType` or a subtype of
+   :c:data:`PyDateTime_TZInfoType`.  *ob* must not be *NULL*.
 
    .. versionadded:: 2.4
 
 
-.. cfunction:: int PyTZInfo_CheckExact(PyObject *ob)
+.. c:function:: int PyTZInfo_CheckExact(PyObject *ob)
 
-   Return true if *ob* is of type :cdata:`PyDateTime_TZInfoType`. *ob* must not be
+   Return true if *ob* is of type :c:data:`PyDateTime_TZInfoType`. *ob* must not be
    *NULL*.
 
    .. versionadded:: 2.4
@@ -98,14 +98,14 @@
 Macros to create objects:
 
 
-.. cfunction:: PyObject* PyDate_FromDate(int year, int month, int day)
+.. c:function:: PyObject* PyDate_FromDate(int year, int month, int day)
 
    Return a ``datetime.date`` object with the specified year, month and day.
 
    .. versionadded:: 2.4
 
 
-.. cfunction:: PyObject* PyDateTime_FromDateAndTime(int year, int month, int day, int hour, int minute, int second, int usecond)
+.. c:function:: PyObject* PyDateTime_FromDateAndTime(int year, int month, int day, int hour, int minute, int second, int usecond)
 
    Return a ``datetime.datetime`` object with the specified year, month, day, hour,
    minute, second and microsecond.
@@ -113,7 +113,7 @@
    .. versionadded:: 2.4
 
 
-.. cfunction:: PyObject* PyTime_FromTime(int hour, int minute, int second, int usecond)
+.. c:function:: PyObject* PyTime_FromTime(int hour, int minute, int second, int usecond)
 
    Return a ``datetime.time`` object with the specified hour, minute, second and
    microsecond.
@@ -121,7 +121,7 @@
    .. versionadded:: 2.4
 
 
-.. cfunction:: PyObject* PyDelta_FromDSU(int days, int seconds, int useconds)
+.. c:function:: PyObject* PyDelta_FromDSU(int days, int seconds, int useconds)
 
    Return a ``datetime.timedelta`` object representing the given number of days,
    seconds and microseconds.  Normalization is performed so that the resulting
@@ -131,90 +131,90 @@
    .. versionadded:: 2.4
 
 Macros to extract fields from date objects.  The argument must be an instance of
-:cdata:`PyDateTime_Date`, including subclasses (such as
-:cdata:`PyDateTime_DateTime`).  The argument must not be *NULL*, and the type is
+:c:data:`PyDateTime_Date`, including subclasses (such as
+:c:data:`PyDateTime_DateTime`).  The argument must not be *NULL*, and the type is
 not checked:
 
 
-.. cfunction:: int PyDateTime_GET_YEAR(PyDateTime_Date *o)
+.. c:function:: int PyDateTime_GET_YEAR(PyDateTime_Date *o)
 
    Return the year, as a positive int.
 
    .. versionadded:: 2.4
 
 
-.. cfunction:: int PyDateTime_GET_MONTH(PyDateTime_Date *o)
+.. c:function:: int PyDateTime_GET_MONTH(PyDateTime_Date *o)
 
    Return the month, as an int from 1 through 12.
 
    .. versionadded:: 2.4
 
 
-.. cfunction:: int PyDateTime_GET_DAY(PyDateTime_Date *o)
+.. c:function:: int PyDateTime_GET_DAY(PyDateTime_Date *o)
 
    Return the day, as an int from 1 through 31.
 
    .. versionadded:: 2.4
 
 Macros to extract fields from datetime objects.  The argument must be an
-instance of :cdata:`PyDateTime_DateTime`, including subclasses. The argument
+instance of :c:data:`PyDateTime_DateTime`, including subclasses. The argument
 must not be *NULL*, and the type is not checked:
 
 
-.. cfunction:: int PyDateTime_DATE_GET_HOUR(PyDateTime_DateTime *o)
+.. c:function:: int PyDateTime_DATE_GET_HOUR(PyDateTime_DateTime *o)
 
    Return the hour, as an int from 0 through 23.
 
    .. versionadded:: 2.4
 
 
-.. cfunction:: int PyDateTime_DATE_GET_MINUTE(PyDateTime_DateTime *o)
+.. c:function:: int PyDateTime_DATE_GET_MINUTE(PyDateTime_DateTime *o)
 
    Return the minute, as an int from 0 through 59.
 
    .. versionadded:: 2.4
 
 
-.. cfunction:: int PyDateTime_DATE_GET_SECOND(PyDateTime_DateTime *o)
+.. c:function:: int PyDateTime_DATE_GET_SECOND(PyDateTime_DateTime *o)
 
    Return the second, as an int from 0 through 59.
 
    .. versionadded:: 2.4
 
 
-.. cfunction:: int PyDateTime_DATE_GET_MICROSECOND(PyDateTime_DateTime *o)
+.. c:function:: int PyDateTime_DATE_GET_MICROSECOND(PyDateTime_DateTime *o)
 
    Return the microsecond, as an int from 0 through 999999.
 
    .. versionadded:: 2.4
 
 Macros to extract fields from time objects.  The argument must be an instance of
-:cdata:`PyDateTime_Time`, including subclasses. The argument must not be *NULL*,
+:c:data:`PyDateTime_Time`, including subclasses. The argument must not be *NULL*,
 and the type is not checked:
 
 
-.. cfunction:: int PyDateTime_TIME_GET_HOUR(PyDateTime_Time *o)
+.. c:function:: int PyDateTime_TIME_GET_HOUR(PyDateTime_Time *o)
 
    Return the hour, as an int from 0 through 23.
 
    .. versionadded:: 2.4
 
 
-.. cfunction:: int PyDateTime_TIME_GET_MINUTE(PyDateTime_Time *o)
+.. c:function:: int PyDateTime_TIME_GET_MINUTE(PyDateTime_Time *o)
 
    Return the minute, as an int from 0 through 59.
 
    .. versionadded:: 2.4
 
 
-.. cfunction:: int PyDateTime_TIME_GET_SECOND(PyDateTime_Time *o)
+.. c:function:: int PyDateTime_TIME_GET_SECOND(PyDateTime_Time *o)
 
    Return the second, as an int from 0 through 59.
 
    .. versionadded:: 2.4
 
 
-.. cfunction:: int PyDateTime_TIME_GET_MICROSECOND(PyDateTime_Time *o)
+.. c:function:: int PyDateTime_TIME_GET_MICROSECOND(PyDateTime_Time *o)
 
    Return the microsecond, as an int from 0 through 999999.
 
@@ -223,7 +223,7 @@
 Macros for the convenience of modules implementing the DB API:
 
 
-.. cfunction:: PyObject* PyDateTime_FromTimestamp(PyObject *args)
+.. c:function:: PyObject* PyDateTime_FromTimestamp(PyObject *args)
 
    Create and return a new ``datetime.datetime`` object given an argument tuple
    suitable for passing to ``datetime.datetime.fromtimestamp()``.
@@ -231,7 +231,7 @@
    .. versionadded:: 2.4
 
 
-.. cfunction:: PyObject* PyDate_FromTimestamp(PyObject *args)
+.. c:function:: PyObject* PyDate_FromTimestamp(PyObject *args)
 
    Create and return a new ``datetime.date`` object given an argument tuple
    suitable for passing to ``datetime.date.fromtimestamp()``.
diff --git a/Doc/c-api/descriptor.rst b/Doc/c-api/descriptor.rst
index 6ed8433..43baeaf 100644
--- a/Doc/c-api/descriptor.rst
+++ b/Doc/c-api/descriptor.rst
@@ -9,39 +9,39 @@
 found in the dictionary of type objects.
 
 
-.. cvar:: PyTypeObject PyProperty_Type
+.. c:var:: PyTypeObject PyProperty_Type
 
    The type object for the built-in descriptor types.
 
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyObject* PyDescr_NewGetSet(PyTypeObject *type, struct PyGetSetDef *getset)
+.. c:function:: PyObject* PyDescr_NewGetSet(PyTypeObject *type, struct PyGetSetDef *getset)
 
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyObject* PyDescr_NewMember(PyTypeObject *type, struct PyMemberDef *meth)
+.. c:function:: PyObject* PyDescr_NewMember(PyTypeObject *type, struct PyMemberDef *meth)
 
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyObject* PyDescr_NewMethod(PyTypeObject *type, struct PyMethodDef *meth)
+.. c:function:: PyObject* PyDescr_NewMethod(PyTypeObject *type, struct PyMethodDef *meth)
 
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyObject* PyDescr_NewWrapper(PyTypeObject *type, struct wrapperbase *wrapper, void *wrapped)
+.. c:function:: PyObject* PyDescr_NewWrapper(PyTypeObject *type, struct wrapperbase *wrapper, void *wrapped)
 
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyObject* PyDescr_NewClassMethod(PyTypeObject *type, PyMethodDef *method)
+.. c:function:: PyObject* PyDescr_NewClassMethod(PyTypeObject *type, PyMethodDef *method)
 
    .. versionadded:: 2.3
 
 
-.. cfunction:: int PyDescr_IsData(PyObject *descr)
+.. c:function:: int PyDescr_IsData(PyObject *descr)
 
    Return true if the descriptor objects *descr* describes a data attribute, or
    false if it describes a method.  *descr* must be a descriptor object; there is
@@ -50,6 +50,6 @@
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyObject* PyWrapper_New(PyObject *, PyObject *)
+.. c:function:: PyObject* PyWrapper_New(PyObject *, PyObject *)
 
    .. versionadded:: 2.2
diff --git a/Doc/c-api/dict.rst b/Doc/c-api/dict.rst
index 066e7f1..3e967bd 100644
--- a/Doc/c-api/dict.rst
+++ b/Doc/c-api/dict.rst
@@ -8,23 +8,23 @@
 .. index:: object: dictionary
 
 
-.. ctype:: PyDictObject
+.. c:type:: PyDictObject
 
-   This subtype of :ctype:`PyObject` represents a Python dictionary object.
+   This subtype of :c:type:`PyObject` represents a Python dictionary object.
 
 
-.. cvar:: PyTypeObject PyDict_Type
+.. c:var:: PyTypeObject PyDict_Type
 
    .. index::
       single: DictType (in module types)
       single: DictionaryType (in module types)
 
-   This instance of :ctype:`PyTypeObject` represents the Python dictionary
+   This instance of :c:type:`PyTypeObject` represents the Python dictionary
    type.  This is exposed to Python programs as ``dict`` and
    ``types.DictType``.
 
 
-.. cfunction:: int PyDict_Check(PyObject *p)
+.. c:function:: int PyDict_Check(PyObject *p)
 
    Return true if *p* is a dict object or an instance of a subtype of the dict
    type.
@@ -33,7 +33,7 @@
       Allowed subtypes to be accepted.
 
 
-.. cfunction:: int PyDict_CheckExact(PyObject *p)
+.. c:function:: int PyDict_CheckExact(PyObject *p)
 
    Return true if *p* is a dict object, but not an instance of a subtype of
    the dict type.
@@ -41,12 +41,12 @@
    .. versionadded:: 2.4
 
 
-.. cfunction:: PyObject* PyDict_New()
+.. c:function:: PyObject* PyDict_New()
 
    Return a new empty dictionary, or *NULL* on failure.
 
 
-.. cfunction:: PyObject* PyDictProxy_New(PyObject *dict)
+.. c:function:: PyObject* PyDictProxy_New(PyObject *dict)
 
    Return a proxy object for a mapping which enforces read-only behavior.
    This is normally used to create a proxy to prevent modification of the
@@ -55,12 +55,12 @@
    .. versionadded:: 2.2
 
 
-.. cfunction:: void PyDict_Clear(PyObject *p)
+.. c:function:: void PyDict_Clear(PyObject *p)
 
    Empty an existing dictionary of all key-value pairs.
 
 
-.. cfunction:: int PyDict_Contains(PyObject *p, PyObject *key)
+.. c:function:: int PyDict_Contains(PyObject *p, PyObject *key)
 
    Determine if dictionary *p* contains *key*.  If an item in *p* is matches
    *key*, return ``1``, otherwise return ``0``.  On error, return ``-1``.
@@ -69,74 +69,74 @@
    .. versionadded:: 2.4
 
 
-.. cfunction:: PyObject* PyDict_Copy(PyObject *p)
+.. c:function:: PyObject* PyDict_Copy(PyObject *p)
 
    Return a new dictionary that contains the same key-value pairs as *p*.
 
    .. versionadded:: 1.6
 
 
-.. cfunction:: int PyDict_SetItem(PyObject *p, PyObject *key, PyObject *val)
+.. c:function:: int PyDict_SetItem(PyObject *p, PyObject *key, PyObject *val)
 
    Insert *value* into the dictionary *p* with a key of *key*.  *key* must be
    :term:`hashable`; if it isn't, :exc:`TypeError` will be raised. Return
    ``0`` on success or ``-1`` on failure.
 
 
-.. cfunction:: int PyDict_SetItemString(PyObject *p, const char *key, PyObject *val)
+.. c:function:: int PyDict_SetItemString(PyObject *p, const char *key, PyObject *val)
 
    .. index:: single: PyString_FromString()
 
    Insert *value* into the dictionary *p* using *key* as a key. *key* should
-   be a :ctype:`char\*`.  The key object is created using
+   be a :c:type:`char\*`.  The key object is created using
    ``PyString_FromString(key)``.  Return ``0`` on success or ``-1`` on
    failure.
 
 
-.. cfunction:: int PyDict_DelItem(PyObject *p, PyObject *key)
+.. c:function:: int PyDict_DelItem(PyObject *p, PyObject *key)
 
    Remove the entry in dictionary *p* with key *key*. *key* must be hashable;
    if it isn't, :exc:`TypeError` is raised.  Return ``0`` on success or ``-1``
    on failure.
 
 
-.. cfunction:: int PyDict_DelItemString(PyObject *p, char *key)
+.. c:function:: int PyDict_DelItemString(PyObject *p, char *key)
 
    Remove the entry in dictionary *p* which has a key specified by the string
    *key*.  Return ``0`` on success or ``-1`` on failure.
 
 
-.. cfunction:: PyObject* PyDict_GetItem(PyObject *p, PyObject *key)
+.. c:function:: PyObject* PyDict_GetItem(PyObject *p, PyObject *key)
 
    Return the object from dictionary *p* which has a key *key*.  Return *NULL*
    if the key *key* is not present, but *without* setting an exception.
 
 
-.. cfunction:: PyObject* PyDict_GetItemString(PyObject *p, const char *key)
+.. c:function:: PyObject* PyDict_GetItemString(PyObject *p, const char *key)
 
-   This is the same as :cfunc:`PyDict_GetItem`, but *key* is specified as a
-   :ctype:`char\*`, rather than a :ctype:`PyObject\*`.
+   This is the same as :c:func:`PyDict_GetItem`, but *key* is specified as a
+   :c:type:`char\*`, rather than a :c:type:`PyObject\*`.
 
 
-.. cfunction:: PyObject* PyDict_Items(PyObject *p)
+.. c:function:: PyObject* PyDict_Items(PyObject *p)
 
-   Return a :ctype:`PyListObject` containing all the items from the
+   Return a :c:type:`PyListObject` containing all the items from the
    dictionary, as in the dictionary method :meth:`dict.items`.
 
 
-.. cfunction:: PyObject* PyDict_Keys(PyObject *p)
+.. c:function:: PyObject* PyDict_Keys(PyObject *p)
 
-   Return a :ctype:`PyListObject` containing all the keys from the dictionary,
+   Return a :c:type:`PyListObject` containing all the keys from the dictionary,
    as in the dictionary method :meth:`dict.keys`.
 
 
-.. cfunction:: PyObject* PyDict_Values(PyObject *p)
+.. c:function:: PyObject* PyDict_Values(PyObject *p)
 
-   Return a :ctype:`PyListObject` containing all the values from the
+   Return a :c:type:`PyListObject` containing all the values from the
    dictionary *p*, as in the dictionary method :meth:`dict.values`.
 
 
-.. cfunction:: Py_ssize_t PyDict_Size(PyObject *p)
+.. c:function:: Py_ssize_t PyDict_Size(PyObject *p)
 
    .. index:: builtin: len
 
@@ -144,18 +144,18 @@
    ``len(p)`` on a dictionary.
 
    .. versionchanged:: 2.5
-      This function returned an :ctype:`int` type.  This might require changes
+      This function returned an :c:type:`int` type.  This might require changes
       in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: int PyDict_Next(PyObject *p, Py_ssize_t *ppos, PyObject **pkey, PyObject **pvalue)
+.. c:function:: int PyDict_Next(PyObject *p, Py_ssize_t *ppos, PyObject **pkey, PyObject **pvalue)
 
    Iterate over all key-value pairs in the dictionary *p*.  The
-   :ctype:`Py_ssize_t` referred to by *ppos* must be initialized to ``0``
+   :c:type:`Py_ssize_t` referred to by *ppos* must be initialized to ``0``
    prior to the first call to this function to start the iteration; the
    function returns true for each pair in the dictionary, and false once all
    pairs have been reported.  The parameters *pkey* and *pvalue* should either
-   point to :ctype:`PyObject\*` variables that will be filled in with each key
+   point to :c:type:`PyObject\*` variables that will be filled in with each key
    and value, respectively, or may be *NULL*.  Any references returned through
    them are borrowed.  *ppos* should not be altered during iteration. Its
    value represents offsets within the internal dictionary structure, and
@@ -192,15 +192,15 @@
       }
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int *` type for *ppos*. This might require
+      This function used an :c:type:`int *` type for *ppos*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: int PyDict_Merge(PyObject *a, PyObject *b, int override)
+.. c:function:: int PyDict_Merge(PyObject *a, PyObject *b, int override)
 
    Iterate over mapping object *b* adding key-value pairs to dictionary *a*.
-   *b* may be a dictionary, or any object supporting :cfunc:`PyMapping_Keys`
-   and :cfunc:`PyObject_GetItem`. If *override* is true, existing pairs in *a*
+   *b* may be a dictionary, or any object supporting :c:func:`PyMapping_Keys`
+   and :c:func:`PyObject_GetItem`. If *override* is true, existing pairs in *a*
    will be replaced if a matching key is found in *b*, otherwise pairs will
    only be added if there is not a matching key in *a*. Return ``0`` on
    success or ``-1`` if an exception was raised.
@@ -208,7 +208,7 @@
    .. versionadded:: 2.2
 
 
-.. cfunction:: int PyDict_Update(PyObject *a, PyObject *b)
+.. c:function:: int PyDict_Update(PyObject *a, PyObject *b)
 
    This is the same as ``PyDict_Merge(a, b, 1)`` in C, or ``a.update(b)`` in
    Python.  Return ``0`` on success or ``-1`` if an exception was raised.
@@ -216,7 +216,7 @@
    .. versionadded:: 2.2
 
 
-.. cfunction:: int PyDict_MergeFromSeq2(PyObject *a, PyObject *seq2, int override)
+.. c:function:: int PyDict_MergeFromSeq2(PyObject *a, PyObject *seq2, int override)
 
    Update or merge into dictionary *a*, from the key-value pairs in *seq2*.
    *seq2* must be an iterable object producing iterable objects of length 2,
diff --git a/Doc/c-api/exceptions.rst b/Doc/c-api/exceptions.rst
index beedfbe..025b75a 100644
--- a/Doc/c-api/exceptions.rst
+++ b/Doc/c-api/exceptions.rst
@@ -9,12 +9,12 @@
 
 The functions described in this chapter will let you handle and raise Python
 exceptions.  It is important to understand some of the basics of Python
-exception handling.  It works somewhat like the Unix :cdata:`errno` variable:
+exception handling.  It works somewhat like the Unix :c:data:`errno` variable:
 there is a global indicator (per thread) of the last error that occurred.  Most
 functions don't clear this on success, but will set it to indicate the cause of
 the error on failure.  Most functions also return an error indicator, usually
 *NULL* if they are supposed to return a pointer, or ``-1`` if they return an
-integer (exception: the :cfunc:`PyArg_\*` functions return ``1`` for success and
+integer (exception: the :c:func:`PyArg_\*` functions return ``1`` for success and
 ``0`` for failure).
 
 When a function must fail because some function it called failed, it generally
@@ -41,7 +41,7 @@
    Either alphabetical or some kind of structure.
 
 
-.. cfunction:: void PyErr_PrintEx(int set_sys_last_vars)
+.. c:function:: void PyErr_PrintEx(int set_sys_last_vars)
 
    Print a standard traceback to ``sys.stderr`` and clear the error indicator.
    Call this function only when the error indicator is set.  (Otherwise it will
@@ -52,35 +52,35 @@
    type, value and traceback of the printed exception, respectively.
 
 
-.. cfunction:: void PyErr_Print()
+.. c:function:: void PyErr_Print()
 
    Alias for ``PyErr_PrintEx(1)``.
 
 
-.. cfunction:: PyObject* PyErr_Occurred()
+.. c:function:: PyObject* PyErr_Occurred()
 
    Test whether the error indicator is set.  If set, return the exception *type*
-   (the first argument to the last call to one of the :cfunc:`PyErr_Set\*`
-   functions or to :cfunc:`PyErr_Restore`).  If not set, return *NULL*.  You do not
-   own a reference to the return value, so you do not need to :cfunc:`Py_DECREF`
+   (the first argument to the last call to one of the :c:func:`PyErr_Set\*`
+   functions or to :c:func:`PyErr_Restore`).  If not set, return *NULL*.  You do not
+   own a reference to the return value, so you do not need to :c:func:`Py_DECREF`
    it.
 
    .. note::
 
       Do not compare the return value to a specific exception; use
-      :cfunc:`PyErr_ExceptionMatches` instead, shown below.  (The comparison could
+      :c:func:`PyErr_ExceptionMatches` instead, shown below.  (The comparison could
       easily fail since the exception may be an instance instead of a class, in the
       case of a class exception, or it may the a subclass of the expected exception.)
 
 
-.. cfunction:: int PyErr_ExceptionMatches(PyObject *exc)
+.. c:function:: int PyErr_ExceptionMatches(PyObject *exc)
 
    Equivalent to ``PyErr_GivenExceptionMatches(PyErr_Occurred(), exc)``.  This
    should only be called when an exception is actually set; a memory access
    violation will occur if no exception has been raised.
 
 
-.. cfunction:: int PyErr_GivenExceptionMatches(PyObject *given, PyObject *exc)
+.. c:function:: int PyErr_GivenExceptionMatches(PyObject *given, PyObject *exc)
 
    Return true if the *given* exception matches the exception in *exc*.  If
    *exc* is a class object, this also returns true when *given* is an instance
@@ -88,22 +88,22 @@
    recursively in subtuples) are searched for a match.
 
 
-.. cfunction:: void PyErr_NormalizeException(PyObject**exc, PyObject**val, PyObject**tb)
+.. c:function:: void PyErr_NormalizeException(PyObject**exc, PyObject**val, PyObject**tb)
 
-   Under certain circumstances, the values returned by :cfunc:`PyErr_Fetch` below
+   Under certain circumstances, the values returned by :c:func:`PyErr_Fetch` below
    can be "unnormalized", meaning that ``*exc`` is a class object but ``*val`` is
    not an instance of the  same class.  This function can be used to instantiate
    the class in that case.  If the values are already normalized, nothing happens.
    The delayed normalization is implemented to improve performance.
 
 
-.. cfunction:: void PyErr_Clear()
+.. c:function:: void PyErr_Clear()
 
    Clear the error indicator.  If the error indicator is not set, there is no
    effect.
 
 
-.. cfunction:: void PyErr_Fetch(PyObject **ptype, PyObject **pvalue, PyObject **ptraceback)
+.. c:function:: void PyErr_Fetch(PyObject **ptype, PyObject **pvalue, PyObject **ptraceback)
 
    Retrieve the error indicator into three variables whose addresses are passed.
    If the error indicator is not set, set all three variables to *NULL*.  If it is
@@ -116,7 +116,7 @@
       by code that needs to save and restore the error indicator temporarily.
 
 
-.. cfunction:: void PyErr_Restore(PyObject *type, PyObject *value, PyObject *traceback)
+.. c:function:: void PyErr_Restore(PyObject *type, PyObject *value, PyObject *traceback)
 
    Set  the error indicator from the three objects.  If the error indicator is
    already set, it is cleared first.  If the objects are *NULL*, the error
@@ -131,111 +131,111 @@
    .. note::
 
       This function is normally only used by code that needs to save and restore the
-      error indicator temporarily; use :cfunc:`PyErr_Fetch` to save the current
+      error indicator temporarily; use :c:func:`PyErr_Fetch` to save the current
       exception state.
 
 
-.. cfunction:: void PyErr_SetString(PyObject *type, const char *message)
+.. c:function:: void PyErr_SetString(PyObject *type, const char *message)
 
    This is the most common way to set the error indicator.  The first argument
    specifies the exception type; it is normally one of the standard exceptions,
-   e.g. :cdata:`PyExc_RuntimeError`.  You need not increment its reference count.
+   e.g. :c:data:`PyExc_RuntimeError`.  You need not increment its reference count.
    The second argument is an error message; it is converted to a string object.
 
 
-.. cfunction:: void PyErr_SetObject(PyObject *type, PyObject *value)
+.. c:function:: void PyErr_SetObject(PyObject *type, PyObject *value)
 
-   This function is similar to :cfunc:`PyErr_SetString` but lets you specify an
+   This function is similar to :c:func:`PyErr_SetString` but lets you specify an
    arbitrary Python object for the "value" of the exception.
 
 
-.. cfunction:: PyObject* PyErr_Format(PyObject *exception, const char *format, ...)
+.. c:function:: PyObject* PyErr_Format(PyObject *exception, const char *format, ...)
 
    This function sets the error indicator and returns *NULL*.  *exception*
    should be a Python exception class.  The *format* and subsequent
    parameters help format the error message; they have the same meaning and
-   values as in :cfunc:`PyString_FromFormat`.
+   values as in :c:func:`PyString_FromFormat`.
 
 
-.. cfunction:: void PyErr_SetNone(PyObject *type)
+.. c:function:: void PyErr_SetNone(PyObject *type)
 
    This is a shorthand for ``PyErr_SetObject(type, Py_None)``.
 
 
-.. cfunction:: int PyErr_BadArgument()
+.. c:function:: int PyErr_BadArgument()
 
    This is a shorthand for ``PyErr_SetString(PyExc_TypeError, message)``, where
    *message* indicates that a built-in operation was invoked with an illegal
    argument.  It is mostly for internal use.
 
 
-.. cfunction:: PyObject* PyErr_NoMemory()
+.. c:function:: PyObject* PyErr_NoMemory()
 
    This is a shorthand for ``PyErr_SetNone(PyExc_MemoryError)``; it returns *NULL*
    so an object allocation function can write ``return PyErr_NoMemory();`` when it
    runs out of memory.
 
 
-.. cfunction:: PyObject* PyErr_SetFromErrno(PyObject *type)
+.. c:function:: PyObject* PyErr_SetFromErrno(PyObject *type)
 
    .. index:: single: strerror()
 
    This is a convenience function to raise an exception when a C library function
-   has returned an error and set the C variable :cdata:`errno`.  It constructs a
-   tuple object whose first item is the integer :cdata:`errno` value and whose
-   second item is the corresponding error message (gotten from :cfunc:`strerror`),
+   has returned an error and set the C variable :c:data:`errno`.  It constructs a
+   tuple object whose first item is the integer :c:data:`errno` value and whose
+   second item is the corresponding error message (gotten from :c:func:`strerror`),
    and then calls ``PyErr_SetObject(type, object)``.  On Unix, when the
-   :cdata:`errno` value is :const:`EINTR`, indicating an interrupted system call,
-   this calls :cfunc:`PyErr_CheckSignals`, and if that set the error indicator,
+   :c:data:`errno` value is :const:`EINTR`, indicating an interrupted system call,
+   this calls :c:func:`PyErr_CheckSignals`, and if that set the error indicator,
    leaves it set to that.  The function always returns *NULL*, so a wrapper
    function around a system call can write ``return PyErr_SetFromErrno(type);``
    when the system call returns an error.
 
 
-.. cfunction:: PyObject* PyErr_SetFromErrnoWithFilename(PyObject *type, const char *filename)
+.. c:function:: PyObject* PyErr_SetFromErrnoWithFilename(PyObject *type, const char *filename)
 
-   Similar to :cfunc:`PyErr_SetFromErrno`, with the additional behavior that if
+   Similar to :c:func:`PyErr_SetFromErrno`, with the additional behavior that if
    *filename* is not *NULL*, it is passed to the constructor of *type* as a third
    parameter.  In the case of exceptions such as :exc:`IOError` and :exc:`OSError`,
    this is used to define the :attr:`filename` attribute of the exception instance.
 
 
-.. cfunction:: PyObject* PyErr_SetFromWindowsErr(int ierr)
+.. c:function:: PyObject* PyErr_SetFromWindowsErr(int ierr)
 
    This is a convenience function to raise :exc:`WindowsError`. If called with
-   *ierr* of :cdata:`0`, the error code returned by a call to :cfunc:`GetLastError`
-   is used instead.  It calls the Win32 function :cfunc:`FormatMessage` to retrieve
-   the Windows description of error code given by *ierr* or :cfunc:`GetLastError`,
+   *ierr* of :c:data:`0`, the error code returned by a call to :c:func:`GetLastError`
+   is used instead.  It calls the Win32 function :c:func:`FormatMessage` to retrieve
+   the Windows description of error code given by *ierr* or :c:func:`GetLastError`,
    then it constructs a tuple object whose first item is the *ierr* value and whose
    second item is the corresponding error message (gotten from
-   :cfunc:`FormatMessage`), and then calls ``PyErr_SetObject(PyExc_WindowsError,
+   :c:func:`FormatMessage`), and then calls ``PyErr_SetObject(PyExc_WindowsError,
    object)``. This function always returns *NULL*. Availability: Windows.
 
 
-.. cfunction:: PyObject* PyErr_SetExcFromWindowsErr(PyObject *type, int ierr)
+.. c:function:: PyObject* PyErr_SetExcFromWindowsErr(PyObject *type, int ierr)
 
-   Similar to :cfunc:`PyErr_SetFromWindowsErr`, with an additional parameter
+   Similar to :c:func:`PyErr_SetFromWindowsErr`, with an additional parameter
    specifying the exception type to be raised. Availability: Windows.
 
    .. versionadded:: 2.3
 
 
-.. cfunction:: PyObject* PyErr_SetFromWindowsErrWithFilename(int ierr, const char *filename)
+.. c:function:: PyObject* PyErr_SetFromWindowsErrWithFilename(int ierr, const char *filename)
 
-   Similar to :cfunc:`PyErr_SetFromWindowsErr`, with the additional behavior that
+   Similar to :c:func:`PyErr_SetFromWindowsErr`, with the additional behavior that
    if *filename* is not *NULL*, it is passed to the constructor of
    :exc:`WindowsError` as a third parameter. Availability: Windows.
 
 
-.. cfunction:: PyObject* PyErr_SetExcFromWindowsErrWithFilename(PyObject *type, int ierr, char *filename)
+.. c:function:: PyObject* PyErr_SetExcFromWindowsErrWithFilename(PyObject *type, int ierr, char *filename)
 
-   Similar to :cfunc:`PyErr_SetFromWindowsErrWithFilename`, with an additional
+   Similar to :c:func:`PyErr_SetFromWindowsErrWithFilename`, with an additional
    parameter specifying the exception type to be raised. Availability: Windows.
 
    .. versionadded:: 2.3
 
 
-.. cfunction:: void PyErr_BadInternalCall()
+.. c:function:: void PyErr_BadInternalCall()
 
    This is a shorthand for ``PyErr_SetString(PyExc_SystemError, message)``,
    where *message* indicates that an internal operation (e.g. a Python/C API
@@ -243,13 +243,13 @@
    use.
 
 
-.. cfunction:: int PyErr_WarnEx(PyObject *category, char *message, int stacklevel)
+.. c:function:: int PyErr_WarnEx(PyObject *category, char *message, int stacklevel)
 
    Issue a warning message.  The *category* argument is a warning category (see
    below) or *NULL*; the *message* argument is a message string.  *stacklevel* is a
    positive number giving a number of stack frames; the warning will be issued from
    the  currently executing line of code in that stack frame.  A *stacklevel* of 1
-   is the function calling :cfunc:`PyErr_WarnEx`, 2 is  the function above that,
+   is the function calling :c:func:`PyErr_WarnEx`, 2 is  the function above that,
    and so forth.
 
    This function normally prints a warning message to *sys.stderr*; however, it is
@@ -261,36 +261,36 @@
    is raised.  (It is not possible to determine whether a warning message is
    actually printed, nor what the reason is for the exception; this is
    intentional.)  If an exception is raised, the caller should do its normal
-   exception handling (for example, :cfunc:`Py_DECREF` owned references and return
+   exception handling (for example, :c:func:`Py_DECREF` owned references and return
    an error value).
 
-   Warning categories must be subclasses of :cdata:`Warning`; the default warning
-   category is :cdata:`RuntimeWarning`.  The standard Python warning categories are
+   Warning categories must be subclasses of :c:data:`Warning`; the default warning
+   category is :c:data:`RuntimeWarning`.  The standard Python warning categories are
    available as global variables whose names are ``PyExc_`` followed by the Python
-   exception name. These have the type :ctype:`PyObject\*`; they are all class
-   objects. Their names are :cdata:`PyExc_Warning`, :cdata:`PyExc_UserWarning`,
-   :cdata:`PyExc_UnicodeWarning`, :cdata:`PyExc_DeprecationWarning`,
-   :cdata:`PyExc_SyntaxWarning`, :cdata:`PyExc_RuntimeWarning`, and
-   :cdata:`PyExc_FutureWarning`.  :cdata:`PyExc_Warning` is a subclass of
-   :cdata:`PyExc_Exception`; the other warning categories are subclasses of
-   :cdata:`PyExc_Warning`.
+   exception name. These have the type :c:type:`PyObject\*`; they are all class
+   objects. Their names are :c:data:`PyExc_Warning`, :c:data:`PyExc_UserWarning`,
+   :c:data:`PyExc_UnicodeWarning`, :c:data:`PyExc_DeprecationWarning`,
+   :c:data:`PyExc_SyntaxWarning`, :c:data:`PyExc_RuntimeWarning`, and
+   :c:data:`PyExc_FutureWarning`.  :c:data:`PyExc_Warning` is a subclass of
+   :c:data:`PyExc_Exception`; the other warning categories are subclasses of
+   :c:data:`PyExc_Warning`.
 
    For information about warning control, see the documentation for the
    :mod:`warnings` module and the :option:`-W` option in the command line
    documentation.  There is no C API for warning control.
 
 
-.. cfunction:: int PyErr_Warn(PyObject *category, char *message)
+.. c:function:: int PyErr_Warn(PyObject *category, char *message)
 
    Issue a warning message.  The *category* argument is a warning category (see
    below) or *NULL*; the *message* argument is a message string.  The warning will
-   appear to be issued from the function calling :cfunc:`PyErr_Warn`, equivalent to
-   calling :cfunc:`PyErr_WarnEx` with a *stacklevel* of 1.
+   appear to be issued from the function calling :c:func:`PyErr_Warn`, equivalent to
+   calling :c:func:`PyErr_WarnEx` with a *stacklevel* of 1.
 
-   Deprecated; use :cfunc:`PyErr_WarnEx` instead.
+   Deprecated; use :c:func:`PyErr_WarnEx` instead.
 
 
-.. cfunction:: int PyErr_WarnExplicit(PyObject *category, const char *message, const char *filename, int lineno, const char *module, PyObject *registry)
+.. c:function:: int PyErr_WarnExplicit(PyObject *category, const char *message, const char *filename, int lineno, const char *module, PyObject *registry)
 
    Issue a warning message with explicit control over all warning attributes.  This
    is a straightforward wrapper around the Python function
@@ -299,15 +299,15 @@
    described there.
 
 
-.. cfunction:: int PyErr_WarnPy3k(char *message, int stacklevel)
+.. c:function:: int PyErr_WarnPy3k(char *message, int stacklevel)
 
    Issue a :exc:`DeprecationWarning` with the given *message* and *stacklevel*
-   if the :cdata:`Py_Py3kWarningFlag` flag is enabled.
+   if the :c:data:`Py_Py3kWarningFlag` flag is enabled.
 
    .. versionadded:: 2.6
 
 
-.. cfunction:: int PyErr_CheckSignals()
+.. c:function:: int PyErr_CheckSignals()
 
    .. index::
       module: signal
@@ -324,21 +324,21 @@
    cleared if it was previously set.
 
 
-.. cfunction:: void PyErr_SetInterrupt()
+.. c:function:: void PyErr_SetInterrupt()
 
    .. index::
       single: SIGINT
       single: KeyboardInterrupt (built-in exception)
 
    This function simulates the effect of a :const:`SIGINT` signal arriving --- the
-   next time :cfunc:`PyErr_CheckSignals` is called,  :exc:`KeyboardInterrupt` will
+   next time :c:func:`PyErr_CheckSignals` is called,  :exc:`KeyboardInterrupt` will
    be raised.  It may be called without holding the interpreter lock.
 
    .. % XXX This was described as obsolete, but is used in
    .. % thread.interrupt_main() (used from IDLE), so it's still needed.
 
 
-.. cfunction:: int PySignal_SetWakeupFd(int fd)
+.. c:function:: int PySignal_SetWakeupFd(int fd)
 
    This utility function specifies a file descriptor to which a ``'\0'`` byte will
    be written whenever a signal is received.  It returns the previous such file
@@ -350,13 +350,13 @@
    .. versionadded:: 2.6
 
 
-.. cfunction:: PyObject* PyErr_NewException(char *name, PyObject *base, PyObject *dict)
+.. c:function:: PyObject* PyErr_NewException(char *name, PyObject *base, PyObject *dict)
 
    This utility function creates and returns a new exception class. The *name*
    argument must be the name of the new exception, a C string of the form
    ``module.classname``.  The *base* and *dict* arguments are normally *NULL*.
    This creates a class object derived from :exc:`Exception` (accessible in C as
-   :cdata:`PyExc_Exception`).
+   :c:data:`PyExc_Exception`).
 
    The :attr:`__module__` attribute of the new class is set to the first part (up
    to the last dot) of the *name* argument, and the class name is set to the last
@@ -365,16 +365,16 @@
    argument can be used to specify a dictionary of class variables and methods.
 
 
-.. cfunction:: PyObject* PyErr_NewExceptionWithDoc(char *name, char *doc, PyObject *base, PyObject *dict)
+.. c:function:: PyObject* PyErr_NewExceptionWithDoc(char *name, char *doc, PyObject *base, PyObject *dict)
 
-   Same as :cfunc:`PyErr_NewException`, except that the new exception class can
+   Same as :c:func:`PyErr_NewException`, except that the new exception class can
    easily be given a docstring: If *doc* is non-*NULL*, it will be used as the
    docstring for the exception class.
 
    .. versionadded:: 2.7
 
 
-.. cfunction:: void PyErr_WriteUnraisable(PyObject *obj)
+.. c:function:: void PyErr_WriteUnraisable(PyObject *obj)
 
    This utility function prints a warning message to ``sys.stderr`` when an
    exception has been set but it is impossible for the interpreter to actually
@@ -393,33 +393,33 @@
 
 The following functions are used to create and modify Unicode exceptions from C.
 
-.. cfunction:: PyObject* PyUnicodeDecodeError_Create(const char *encoding, const char *object, Py_ssize_t length, Py_ssize_t start, Py_ssize_t end, const char *reason)
+.. c:function:: PyObject* PyUnicodeDecodeError_Create(const char *encoding, const char *object, Py_ssize_t length, Py_ssize_t start, Py_ssize_t end, const char *reason)
 
    Create a :class:`UnicodeDecodeError` object with the attributes *encoding*,
    *object*, *length*, *start*, *end* and *reason*.
 
-.. cfunction:: PyObject* PyUnicodeEncodeError_Create(const char *encoding, const Py_UNICODE *object, Py_ssize_t length, Py_ssize_t start, Py_ssize_t end, const char *reason)
+.. c:function:: PyObject* PyUnicodeEncodeError_Create(const char *encoding, const Py_UNICODE *object, Py_ssize_t length, Py_ssize_t start, Py_ssize_t end, const char *reason)
 
    Create a :class:`UnicodeEncodeError` object with the attributes *encoding*,
    *object*, *length*, *start*, *end* and *reason*.
 
-.. cfunction:: PyObject* PyUnicodeTranslateError_Create(const Py_UNICODE *object, Py_ssize_t length, Py_ssize_t start, Py_ssize_t end, const char *reason)
+.. c:function:: PyObject* PyUnicodeTranslateError_Create(const Py_UNICODE *object, Py_ssize_t length, Py_ssize_t start, Py_ssize_t end, const char *reason)
 
    Create a :class:`UnicodeTranslateError` object with the attributes *object*,
    *length*, *start*, *end* and *reason*.
 
-.. cfunction:: PyObject* PyUnicodeDecodeError_GetEncoding(PyObject *exc)
+.. c:function:: PyObject* PyUnicodeDecodeError_GetEncoding(PyObject *exc)
                PyObject* PyUnicodeEncodeError_GetEncoding(PyObject *exc)
 
    Return the *encoding* attribute of the given exception object.
 
-.. cfunction:: PyObject* PyUnicodeDecodeError_GetObject(PyObject *exc)
+.. c:function:: PyObject* PyUnicodeDecodeError_GetObject(PyObject *exc)
                PyObject* PyUnicodeEncodeError_GetObject(PyObject *exc)
                PyObject* PyUnicodeTranslateError_GetObject(PyObject *exc)
 
    Return the *object* attribute of the given exception object.
 
-.. cfunction:: int PyUnicodeDecodeError_GetStart(PyObject *exc, Py_ssize_t *start)
+.. c:function:: int PyUnicodeDecodeError_GetStart(PyObject *exc, Py_ssize_t *start)
                int PyUnicodeEncodeError_GetStart(PyObject *exc, Py_ssize_t *start)
                int PyUnicodeTranslateError_GetStart(PyObject *exc, Py_ssize_t *start)
 
@@ -427,14 +427,14 @@
    *\*start*.  *start* must not be *NULL*.  Return ``0`` on success, ``-1`` on
    failure.
 
-.. cfunction:: int PyUnicodeDecodeError_SetStart(PyObject *exc, Py_ssize_t start)
+.. c:function:: int PyUnicodeDecodeError_SetStart(PyObject *exc, Py_ssize_t start)
                int PyUnicodeEncodeError_SetStart(PyObject *exc, Py_ssize_t start)
                int PyUnicodeTranslateError_SetStart(PyObject *exc, Py_ssize_t start)
 
    Set the *start* attribute of the given exception object to *start*.  Return
    ``0`` on success, ``-1`` on failure.
 
-.. cfunction:: int PyUnicodeDecodeError_GetEnd(PyObject *exc, Py_ssize_t *end)
+.. c:function:: int PyUnicodeDecodeError_GetEnd(PyObject *exc, Py_ssize_t *end)
                int PyUnicodeEncodeError_GetEnd(PyObject *exc, Py_ssize_t *end)
                int PyUnicodeTranslateError_GetEnd(PyObject *exc, Py_ssize_t *end)
 
@@ -442,20 +442,20 @@
    *\*end*.  *end* must not be *NULL*.  Return ``0`` on success, ``-1`` on
    failure.
 
-.. cfunction:: int PyUnicodeDecodeError_SetEnd(PyObject *exc, Py_ssize_t end)
+.. c:function:: int PyUnicodeDecodeError_SetEnd(PyObject *exc, Py_ssize_t end)
                int PyUnicodeEncodeError_SetEnd(PyObject *exc, Py_ssize_t end)
                int PyUnicodeTranslateError_SetEnd(PyObject *exc, Py_ssize_t end)
 
    Set the *end* attribute of the given exception object to *end*.  Return ``0``
    on success, ``-1`` on failure.
 
-.. cfunction:: PyObject* PyUnicodeDecodeError_GetReason(PyObject *exc)
+.. c:function:: PyObject* PyUnicodeDecodeError_GetReason(PyObject *exc)
                PyObject* PyUnicodeEncodeError_GetReason(PyObject *exc)
                PyObject* PyUnicodeTranslateError_GetReason(PyObject *exc)
 
    Return the *reason* attribute of the given exception object.
 
-.. cfunction:: int PyUnicodeDecodeError_SetReason(PyObject *exc, const char *reason)
+.. c:function:: int PyUnicodeDecodeError_SetReason(PyObject *exc, const char *reason)
                int PyUnicodeEncodeError_SetReason(PyObject *exc, const char *reason)
                int PyUnicodeTranslateError_SetReason(PyObject *exc, const char *reason)
 
@@ -471,12 +471,12 @@
 recursive code does not necessarily invoke Python code (which tracks its
 recursion depth automatically).
 
-.. cfunction:: int Py_EnterRecursiveCall(char *where)
+.. c:function:: int Py_EnterRecursiveCall(char *where)
 
    Marks a point where a recursive C-level call is about to be performed.
 
    If :const:`USE_STACKCHECK` is defined, this function checks if the OS
-   stack overflowed using :cfunc:`PyOS_CheckStack`.  In this is the case, it
+   stack overflowed using :c:func:`PyOS_CheckStack`.  In this is the case, it
    sets a :exc:`MemoryError` and returns a nonzero value.
 
    The function then checks if the recursion limit is reached.  If this is the
@@ -487,10 +487,10 @@
    concatenated to the :exc:`RuntimeError` message caused by the recursion depth
    limit.
 
-.. cfunction:: void Py_LeaveRecursiveCall()
+.. c:function:: void Py_LeaveRecursiveCall()
 
-   Ends a :cfunc:`Py_EnterRecursiveCall`.  Must be called once for each
-   *successful* invocation of :cfunc:`Py_EnterRecursiveCall`.
+   Ends a :c:func:`Py_EnterRecursiveCall`.  Must be called once for each
+   *successful* invocation of :c:func:`Py_EnterRecursiveCall`.
 
 
 .. _standardexceptions:
@@ -500,70 +500,70 @@
 
 All standard Python exceptions are available as global variables whose names are
 ``PyExc_`` followed by the Python exception name.  These have the type
-:ctype:`PyObject\*`; they are all class objects.  For completeness, here are all
+:c:type:`PyObject\*`; they are all class objects.  For completeness, here are all
 the variables:
 
-+------------------------------------+----------------------------+----------+
-| C Name                             | Python Name                | Notes    |
-+====================================+============================+==========+
-| :cdata:`PyExc_BaseException`       | :exc:`BaseException`       | (1), (4) |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_Exception`           | :exc:`Exception`           | \(1)     |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_StandardError`       | :exc:`StandardError`       | \(1)     |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_ArithmeticError`     | :exc:`ArithmeticError`     | \(1)     |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_LookupError`         | :exc:`LookupError`         | \(1)     |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_AssertionError`      | :exc:`AssertionError`      |          |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_AttributeError`      | :exc:`AttributeError`      |          |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_EOFError`            | :exc:`EOFError`            |          |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_EnvironmentError`    | :exc:`EnvironmentError`    | \(1)     |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_FloatingPointError`  | :exc:`FloatingPointError`  |          |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_IOError`             | :exc:`IOError`             |          |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_ImportError`         | :exc:`ImportError`         |          |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_IndexError`          | :exc:`IndexError`          |          |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_KeyError`            | :exc:`KeyError`            |          |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_KeyboardInterrupt`   | :exc:`KeyboardInterrupt`   |          |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_MemoryError`         | :exc:`MemoryError`         |          |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_NameError`           | :exc:`NameError`           |          |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_NotImplementedError` | :exc:`NotImplementedError` |          |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_OSError`             | :exc:`OSError`             |          |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_OverflowError`       | :exc:`OverflowError`       |          |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_ReferenceError`      | :exc:`ReferenceError`      | \(2)     |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_RuntimeError`        | :exc:`RuntimeError`        |          |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_SyntaxError`         | :exc:`SyntaxError`         |          |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_SystemError`         | :exc:`SystemError`         |          |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_SystemExit`          | :exc:`SystemExit`          |          |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_TypeError`           | :exc:`TypeError`           |          |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_ValueError`          | :exc:`ValueError`          |          |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_WindowsError`        | :exc:`WindowsError`        | \(3)     |
-+------------------------------------+----------------------------+----------+
-| :cdata:`PyExc_ZeroDivisionError`   | :exc:`ZeroDivisionError`   |          |
-+------------------------------------+----------------------------+----------+
++-------------------------------------+----------------------------+----------+
+| C Name                              | Python Name                | Notes    |
++=====================================+============================+==========+
+| :c:data:`PyExc_BaseException`       | :exc:`BaseException`       | (1), (4) |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_Exception`           | :exc:`Exception`           | \(1)     |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_StandardError`       | :exc:`StandardError`       | \(1)     |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_ArithmeticError`     | :exc:`ArithmeticError`     | \(1)     |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_LookupError`         | :exc:`LookupError`         | \(1)     |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_AssertionError`      | :exc:`AssertionError`      |          |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_AttributeError`      | :exc:`AttributeError`      |          |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_EOFError`            | :exc:`EOFError`            |          |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_EnvironmentError`    | :exc:`EnvironmentError`    | \(1)     |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_FloatingPointError`  | :exc:`FloatingPointError`  |          |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_IOError`             | :exc:`IOError`             |          |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_ImportError`         | :exc:`ImportError`         |          |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_IndexError`          | :exc:`IndexError`          |          |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_KeyError`            | :exc:`KeyError`            |          |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_KeyboardInterrupt`   | :exc:`KeyboardInterrupt`   |          |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_MemoryError`         | :exc:`MemoryError`         |          |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_NameError`           | :exc:`NameError`           |          |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_NotImplementedError` | :exc:`NotImplementedError` |          |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_OSError`             | :exc:`OSError`             |          |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_OverflowError`       | :exc:`OverflowError`       |          |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_ReferenceError`      | :exc:`ReferenceError`      | \(2)     |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_RuntimeError`        | :exc:`RuntimeError`        |          |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_SyntaxError`         | :exc:`SyntaxError`         |          |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_SystemError`         | :exc:`SystemError`         |          |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_SystemExit`          | :exc:`SystemExit`          |          |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_TypeError`           | :exc:`TypeError`           |          |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_ValueError`          | :exc:`ValueError`          |          |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_WindowsError`        | :exc:`WindowsError`        | \(3)     |
++-------------------------------------+----------------------------+----------+
+| :c:data:`PyExc_ZeroDivisionError`   | :exc:`ZeroDivisionError`   |          |
++-------------------------------------+----------------------------+----------+
 
 .. index::
    single: PyExc_BaseException
diff --git a/Doc/c-api/file.rst b/Doc/c-api/file.rst
index 93f6b64..20a7a60 100644
--- a/Doc/c-api/file.rst
+++ b/Doc/c-api/file.rst
@@ -7,79 +7,79 @@
 
 .. index:: object: file
 
-Python's built-in file objects are implemented entirely on the :ctype:`FILE\*`
+Python's built-in file objects are implemented entirely on the :c:type:`FILE\*`
 support from the C standard library.  This is an implementation detail and may
 change in future releases of Python.
 
 
-.. ctype:: PyFileObject
+.. c:type:: PyFileObject
 
-   This subtype of :ctype:`PyObject` represents a Python file object.
+   This subtype of :c:type:`PyObject` represents a Python file object.
 
 
-.. cvar:: PyTypeObject PyFile_Type
+.. c:var:: PyTypeObject PyFile_Type
 
    .. index:: single: FileType (in module types)
 
-   This instance of :ctype:`PyTypeObject` represents the Python file type.  This is
+   This instance of :c:type:`PyTypeObject` represents the Python file type.  This is
    exposed to Python programs as ``file`` and ``types.FileType``.
 
 
-.. cfunction:: int PyFile_Check(PyObject *p)
+.. c:function:: int PyFile_Check(PyObject *p)
 
-   Return true if its argument is a :ctype:`PyFileObject` or a subtype of
-   :ctype:`PyFileObject`.
+   Return true if its argument is a :c:type:`PyFileObject` or a subtype of
+   :c:type:`PyFileObject`.
 
    .. versionchanged:: 2.2
       Allowed subtypes to be accepted.
 
 
-.. cfunction:: int PyFile_CheckExact(PyObject *p)
+.. c:function:: int PyFile_CheckExact(PyObject *p)
 
-   Return true if its argument is a :ctype:`PyFileObject`, but not a subtype of
-   :ctype:`PyFileObject`.
+   Return true if its argument is a :c:type:`PyFileObject`, but not a subtype of
+   :c:type:`PyFileObject`.
 
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyObject* PyFile_FromString(char *filename, char *mode)
+.. c:function:: PyObject* PyFile_FromString(char *filename, char *mode)
 
    .. index:: single: fopen()
 
    On success, return a new file object that is opened on the file given by
    *filename*, with a file mode given by *mode*, where *mode* has the same
-   semantics as the standard C routine :cfunc:`fopen`.  On failure, return *NULL*.
+   semantics as the standard C routine :c:func:`fopen`.  On failure, return *NULL*.
 
 
-.. cfunction:: PyObject* PyFile_FromFile(FILE *fp, char *name, char *mode, int (*close)(FILE*))
+.. c:function:: PyObject* PyFile_FromFile(FILE *fp, char *name, char *mode, int (*close)(FILE*))
 
-   Create a new :ctype:`PyFileObject` from the already-open standard C file
+   Create a new :c:type:`PyFileObject` from the already-open standard C file
    pointer, *fp*.  The function *close* will be called when the file should be
    closed.  Return *NULL* and close the file using *close* on failure.
    *close* is optional and can be set to *NULL*.
 
 
-.. cfunction:: FILE* PyFile_AsFile(PyObject \*p)
+.. c:function:: FILE* PyFile_AsFile(PyObject \*p)
 
-   Return the file object associated with *p* as a :ctype:`FILE\*`.
+   Return the file object associated with *p* as a :c:type:`FILE\*`.
 
-   If the caller will ever use the returned :ctype:`FILE\*` object while
-   the :term:`GIL` is released it must also call the :cfunc:`PyFile_IncUseCount` and
-   :cfunc:`PyFile_DecUseCount` functions described below as appropriate.
+   If the caller will ever use the returned :c:type:`FILE\*` object while
+   the :term:`GIL` is released it must also call the :c:func:`PyFile_IncUseCount` and
+   :c:func:`PyFile_DecUseCount` functions described below as appropriate.
 
 
-.. cfunction:: void PyFile_IncUseCount(PyFileObject \*p)
+.. c:function:: void PyFile_IncUseCount(PyFileObject \*p)
 
    Increments the PyFileObject's internal use count to indicate
-   that the underlying :ctype:`FILE\*` is being used.
+   that the underlying :c:type:`FILE\*` is being used.
    This prevents Python from calling f_close() on it from another thread.
-   Callers of this must call :cfunc:`PyFile_DecUseCount` when they are
-   finished with the :ctype:`FILE\*`.  Otherwise the file object will
+   Callers of this must call :c:func:`PyFile_DecUseCount` when they are
+   finished with the :c:type:`FILE\*`.  Otherwise the file object will
    never be closed by Python.
 
    The :term:`GIL` must be held while calling this function.
 
-   The suggested use is to call this after :cfunc:`PyFile_AsFile` and before
+   The suggested use is to call this after :c:func:`PyFile_AsFile` and before
    you release the GIL::
 
       FILE *fp = PyFile_AsFile(p);
@@ -94,11 +94,11 @@
    .. versionadded:: 2.6
 
 
-.. cfunction:: void PyFile_DecUseCount(PyFileObject \*p)
+.. c:function:: void PyFile_DecUseCount(PyFileObject \*p)
 
    Decrements the PyFileObject's internal unlocked_count member to
-   indicate that the caller is done with its own use of the :ctype:`FILE\*`.
-   This may only be called to undo a prior call to :cfunc:`PyFile_IncUseCount`.
+   indicate that the caller is done with its own use of the :c:type:`FILE\*`.
+   This may only be called to undo a prior call to :c:func:`PyFile_IncUseCount`.
 
    The :term:`GIL` must be held while calling this function (see the example
    above).
@@ -106,7 +106,7 @@
    .. versionadded:: 2.6
 
 
-.. cfunction:: PyObject* PyFile_GetLine(PyObject *p, int n)
+.. c:function:: PyObject* PyFile_GetLine(PyObject *p, int n)
 
    .. index:: single: EOFError (built-in exception)
 
@@ -120,20 +120,20 @@
    raised if the end of the file is reached immediately.
 
 
-.. cfunction:: PyObject* PyFile_Name(PyObject *p)
+.. c:function:: PyObject* PyFile_Name(PyObject *p)
 
    Return the name of the file specified by *p* as a string object.
 
 
-.. cfunction:: void PyFile_SetBufSize(PyFileObject *p, int n)
+.. c:function:: void PyFile_SetBufSize(PyFileObject *p, int n)
 
    .. index:: single: setvbuf()
 
-   Available on systems with :cfunc:`setvbuf` only.  This should only be called
+   Available on systems with :c:func:`setvbuf` only.  This should only be called
    immediately after file object creation.
 
 
-.. cfunction:: int PyFile_SetEncoding(PyFileObject *p, const char *enc)
+.. c:function:: int PyFile_SetEncoding(PyFileObject *p, const char *enc)
 
    Set the file's encoding for Unicode output to *enc*. Return 1 on success and 0
    on failure.
@@ -141,7 +141,7 @@
    .. versionadded:: 2.3
 
 
-.. cfunction:: int PyFile_SetEncodingAndErrors(PyFileObject *p, const char *enc, *errors)
+.. c:function:: int PyFile_SetEncodingAndErrors(PyFileObject *p, const char *enc, *errors)
 
    Set the file's encoding for Unicode output to *enc*, and its error
    mode to *err*. Return 1 on success and 0 on failure.
@@ -149,7 +149,7 @@
    .. versionadded:: 2.6
 
 
-.. cfunction:: int PyFile_SoftSpace(PyObject *p, int newflag)
+.. c:function:: int PyFile_SoftSpace(PyObject *p, int newflag)
 
    .. index:: single: softspace (file attribute)
 
@@ -163,7 +163,7 @@
    but doing so should not be needed.
 
 
-.. cfunction:: int PyFile_WriteObject(PyObject *obj, PyObject *p, int flags)
+.. c:function:: int PyFile_WriteObject(PyObject *obj, PyObject *p, int flags)
 
    .. index:: single: Py_PRINT_RAW
 
@@ -173,7 +173,7 @@
    appropriate exception will be set.
 
 
-.. cfunction:: int PyFile_WriteString(const char *s, PyObject *p)
+.. c:function:: int PyFile_WriteString(const char *s, PyObject *p)
 
    Write string *s* to file object *p*.  Return ``0`` on success or ``-1`` on
    failure; the appropriate exception will be set.
diff --git a/Doc/c-api/float.rst b/Doc/c-api/float.rst
index d92f155..3aa7d18 100644
--- a/Doc/c-api/float.rst
+++ b/Doc/c-api/float.rst
@@ -8,64 +8,64 @@
 .. index:: object: floating point
 
 
-.. ctype:: PyFloatObject
+.. c:type:: PyFloatObject
 
-   This subtype of :ctype:`PyObject` represents a Python floating point object.
+   This subtype of :c:type:`PyObject` represents a Python floating point object.
 
 
-.. cvar:: PyTypeObject PyFloat_Type
+.. c:var:: PyTypeObject PyFloat_Type
 
    .. index:: single: FloatType (in modules types)
 
-   This instance of :ctype:`PyTypeObject` represents the Python floating point
+   This instance of :c:type:`PyTypeObject` represents the Python floating point
    type.  This is the same object as ``float`` and ``types.FloatType``.
 
 
-.. cfunction:: int PyFloat_Check(PyObject *p)
+.. c:function:: int PyFloat_Check(PyObject *p)
 
-   Return true if its argument is a :ctype:`PyFloatObject` or a subtype of
-   :ctype:`PyFloatObject`.
+   Return true if its argument is a :c:type:`PyFloatObject` or a subtype of
+   :c:type:`PyFloatObject`.
 
    .. versionchanged:: 2.2
       Allowed subtypes to be accepted.
 
 
-.. cfunction:: int PyFloat_CheckExact(PyObject *p)
+.. c:function:: int PyFloat_CheckExact(PyObject *p)
 
-   Return true if its argument is a :ctype:`PyFloatObject`, but not a subtype of
-   :ctype:`PyFloatObject`.
+   Return true if its argument is a :c:type:`PyFloatObject`, but not a subtype of
+   :c:type:`PyFloatObject`.
 
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyObject* PyFloat_FromString(PyObject *str, char **pend)
+.. c:function:: PyObject* PyFloat_FromString(PyObject *str, char **pend)
 
-   Create a :ctype:`PyFloatObject` object based on the string value in *str*, or
+   Create a :c:type:`PyFloatObject` object based on the string value in *str*, or
    *NULL* on failure.  The *pend* argument is ignored.  It remains only for
    backward compatibility.
 
 
-.. cfunction:: PyObject* PyFloat_FromDouble(double v)
+.. c:function:: PyObject* PyFloat_FromDouble(double v)
 
-   Create a :ctype:`PyFloatObject` object from *v*, or *NULL* on failure.
+   Create a :c:type:`PyFloatObject` object from *v*, or *NULL* on failure.
 
 
-.. cfunction:: double PyFloat_AsDouble(PyObject *pyfloat)
+.. c:function:: double PyFloat_AsDouble(PyObject *pyfloat)
 
-   Return a C :ctype:`double` representation of the contents of *pyfloat*.  If
+   Return a C :c:type:`double` representation of the contents of *pyfloat*.  If
    *pyfloat* is not a Python floating point object but has a :meth:`__float__`
    method, this method will first be called to convert *pyfloat* into a float.
    This method returns ``-1.0`` upon failure, so one should call
-   :cfunc:`PyErr_Occurred` to check for errors.
+   :c:func:`PyErr_Occurred` to check for errors.
 
 
-.. cfunction:: double PyFloat_AS_DOUBLE(PyObject *pyfloat)
+.. c:function:: double PyFloat_AS_DOUBLE(PyObject *pyfloat)
 
-   Return a C :ctype:`double` representation of the contents of *pyfloat*, but
+   Return a C :c:type:`double` representation of the contents of *pyfloat*, but
    without error checking.
 
 
-.. cfunction:: PyObject* PyFloat_GetInfo(void)
+.. c:function:: PyObject* PyFloat_GetInfo(void)
 
    Return a structseq instance which contains information about the
    precision, minimum and maximum values of a float. It's a thin wrapper
@@ -74,21 +74,21 @@
    .. versionadded:: 2.6
 
 
-.. cfunction:: double PyFloat_GetMax()
+.. c:function:: double PyFloat_GetMax()
 
-   Return the maximum representable finite float *DBL_MAX* as C :ctype:`double`.
+   Return the maximum representable finite float *DBL_MAX* as C :c:type:`double`.
 
    .. versionadded:: 2.6
 
 
-.. cfunction:: double PyFloat_GetMin()
+.. c:function:: double PyFloat_GetMin()
 
-   Return the minimum normalized positive float *DBL_MIN* as C :ctype:`double`.
+   Return the minimum normalized positive float *DBL_MIN* as C :c:type:`double`.
 
    .. versionadded:: 2.6
 
 
-.. cfunction:: int PyFloat_ClearFreeList()
+.. c:function:: int PyFloat_ClearFreeList()
 
    Clear the float free list. Return the number of items that could not
    be freed.
@@ -96,7 +96,7 @@
    .. versionadded:: 2.6
 
 
-.. cfunction:: void PyFloat_AsString(char *buf, PyFloatObject *v)
+.. c:function:: void PyFloat_AsString(char *buf, PyFloatObject *v)
 
    Convert the argument *v* to a string, using the same rules as
    :func:`str`. The length of *buf* should be at least 100.
@@ -108,7 +108,7 @@
       Use :func:`PyObject_Str` or :func:`PyOS_double_to_string` instead.
 
 
-.. cfunction:: void PyFloat_AsReprString(char *buf, PyFloatObject *v)
+.. c:function:: void PyFloat_AsReprString(char *buf, PyFloatObject *v)
 
    Same as PyFloat_AsString, except uses the same rules as
    :func:`repr`.  The length of *buf* should be at least 100.
diff --git a/Doc/c-api/function.rst b/Doc/c-api/function.rst
index e9ed2ab..66f8675 100644
--- a/Doc/c-api/function.rst
+++ b/Doc/c-api/function.rst
@@ -10,26 +10,26 @@
 There are a few functions specific to Python functions.
 
 
-.. ctype:: PyFunctionObject
+.. c:type:: PyFunctionObject
 
    The C structure used for functions.
 
 
-.. cvar:: PyTypeObject PyFunction_Type
+.. c:var:: PyTypeObject PyFunction_Type
 
    .. index:: single: MethodType (in module types)
 
-   This is an instance of :ctype:`PyTypeObject` and represents the Python function
+   This is an instance of :c:type:`PyTypeObject` and represents the Python function
    type.  It is exposed to Python programmers as ``types.FunctionType``.
 
 
-.. cfunction:: int PyFunction_Check(PyObject *o)
+.. c:function:: int PyFunction_Check(PyObject *o)
 
-   Return true if *o* is a function object (has type :cdata:`PyFunction_Type`).
+   Return true if *o* is a function object (has type :c:data:`PyFunction_Type`).
    The parameter must not be *NULL*.
 
 
-.. cfunction:: PyObject* PyFunction_New(PyObject *code, PyObject *globals)
+.. c:function:: PyObject* PyFunction_New(PyObject *code, PyObject *globals)
 
    Return a new function object associated with the code object *code*. *globals*
    must be a dictionary with the global variables accessible to the function.
@@ -38,30 +38,30 @@
    object, the argument defaults and closure are set to *NULL*.
 
 
-.. cfunction:: PyObject* PyFunction_GetCode(PyObject *op)
+.. c:function:: PyObject* PyFunction_GetCode(PyObject *op)
 
    Return the code object associated with the function object *op*.
 
 
-.. cfunction:: PyObject* PyFunction_GetGlobals(PyObject *op)
+.. c:function:: PyObject* PyFunction_GetGlobals(PyObject *op)
 
    Return the globals dictionary associated with the function object *op*.
 
 
-.. cfunction:: PyObject* PyFunction_GetModule(PyObject *op)
+.. c:function:: PyObject* PyFunction_GetModule(PyObject *op)
 
    Return the *__module__* attribute of the function object *op*. This is normally
    a string containing the module name, but can be set to any other object by
    Python code.
 
 
-.. cfunction:: PyObject* PyFunction_GetDefaults(PyObject *op)
+.. c:function:: PyObject* PyFunction_GetDefaults(PyObject *op)
 
    Return the argument default values of the function object *op*. This can be a
    tuple of arguments or *NULL*.
 
 
-.. cfunction:: int PyFunction_SetDefaults(PyObject *op, PyObject *defaults)
+.. c:function:: int PyFunction_SetDefaults(PyObject *op, PyObject *defaults)
 
    Set the argument default values for the function object *op*. *defaults* must be
    *Py_None* or a tuple.
@@ -69,13 +69,13 @@
    Raises :exc:`SystemError` and returns ``-1`` on failure.
 
 
-.. cfunction:: PyObject* PyFunction_GetClosure(PyObject *op)
+.. c:function:: PyObject* PyFunction_GetClosure(PyObject *op)
 
    Return the closure associated with the function object *op*. This can be *NULL*
    or a tuple of cell objects.
 
 
-.. cfunction:: int PyFunction_SetClosure(PyObject *op, PyObject *closure)
+.. c:function:: int PyFunction_SetClosure(PyObject *op, PyObject *closure)
 
    Set the closure associated with the function object *op*. *closure* must be
    *Py_None* or a tuple of cell objects.
diff --git a/Doc/c-api/gcsupport.rst b/Doc/c-api/gcsupport.rst
index 4517929..2a4fda4 100644
--- a/Doc/c-api/gcsupport.rst
+++ b/Doc/c-api/gcsupport.rst
@@ -30,40 +30,40 @@
 
 Constructors for container types must conform to two rules:
 
-#. The memory for the object must be allocated using :cfunc:`PyObject_GC_New`
-   or :cfunc:`PyObject_GC_NewVar`.
+#. The memory for the object must be allocated using :c:func:`PyObject_GC_New`
+   or :c:func:`PyObject_GC_NewVar`.
 
 #. Once all the fields which may contain references to other containers are
-   initialized, it must call :cfunc:`PyObject_GC_Track`.
+   initialized, it must call :c:func:`PyObject_GC_Track`.
 
 
-.. cfunction:: TYPE* PyObject_GC_New(TYPE, PyTypeObject *type)
+.. c:function:: TYPE* PyObject_GC_New(TYPE, PyTypeObject *type)
 
-   Analogous to :cfunc:`PyObject_New` but for container objects with the
+   Analogous to :c:func:`PyObject_New` but for container objects with the
    :const:`Py_TPFLAGS_HAVE_GC` flag set.
 
 
-.. cfunction:: TYPE* PyObject_GC_NewVar(TYPE, PyTypeObject *type, Py_ssize_t size)
+.. c:function:: TYPE* PyObject_GC_NewVar(TYPE, PyTypeObject *type, Py_ssize_t size)
 
-   Analogous to :cfunc:`PyObject_NewVar` but for container objects with the
+   Analogous to :c:func:`PyObject_NewVar` but for container objects with the
    :const:`Py_TPFLAGS_HAVE_GC` flag set.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: TYPE* PyObject_GC_Resize(TYPE, PyVarObject *op, Py_ssize_t newsize)
+.. c:function:: TYPE* PyObject_GC_Resize(TYPE, PyVarObject *op, Py_ssize_t newsize)
 
-   Resize an object allocated by :cfunc:`PyObject_NewVar`.  Returns the
+   Resize an object allocated by :c:func:`PyObject_NewVar`.  Returns the
    resized object or *NULL* on failure.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *newsize*. This might
+      This function used an :c:type:`int` type for *newsize*. This might
       require changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: void PyObject_GC_Track(PyObject *op)
+.. c:function:: void PyObject_GC_Track(PyObject *op)
 
    Adds the object *op* to the set of container objects tracked by the
    collector.  The collector can run at unexpected times so objects must be
@@ -72,44 +72,44 @@
    end of the constructor.
 
 
-.. cfunction:: void _PyObject_GC_TRACK(PyObject *op)
+.. c:function:: void _PyObject_GC_TRACK(PyObject *op)
 
-   A macro version of :cfunc:`PyObject_GC_Track`.  It should not be used for
+   A macro version of :c:func:`PyObject_GC_Track`.  It should not be used for
    extension modules.
 
 Similarly, the deallocator for the object must conform to a similar pair of
 rules:
 
 #. Before fields which refer to other containers are invalidated,
-   :cfunc:`PyObject_GC_UnTrack` must be called.
+   :c:func:`PyObject_GC_UnTrack` must be called.
 
-#. The object's memory must be deallocated using :cfunc:`PyObject_GC_Del`.
+#. The object's memory must be deallocated using :c:func:`PyObject_GC_Del`.
 
 
-.. cfunction:: void PyObject_GC_Del(void *op)
+.. c:function:: void PyObject_GC_Del(void *op)
 
-   Releases memory allocated to an object using :cfunc:`PyObject_GC_New` or
-   :cfunc:`PyObject_GC_NewVar`.
+   Releases memory allocated to an object using :c:func:`PyObject_GC_New` or
+   :c:func:`PyObject_GC_NewVar`.
 
 
-.. cfunction:: void PyObject_GC_UnTrack(void *op)
+.. c:function:: void PyObject_GC_UnTrack(void *op)
 
    Remove the object *op* from the set of container objects tracked by the
-   collector.  Note that :cfunc:`PyObject_GC_Track` can be called again on
+   collector.  Note that :c:func:`PyObject_GC_Track` can be called again on
    this object to add it back to the set of tracked objects.  The deallocator
    (:attr:`tp_dealloc` handler) should call this for the object before any of
    the fields used by the :attr:`tp_traverse` handler become invalid.
 
 
-.. cfunction:: void _PyObject_GC_UNTRACK(PyObject *op)
+.. c:function:: void _PyObject_GC_UNTRACK(PyObject *op)
 
-   A macro version of :cfunc:`PyObject_GC_UnTrack`.  It should not be used for
+   A macro version of :c:func:`PyObject_GC_UnTrack`.  It should not be used for
    extension modules.
 
 The :attr:`tp_traverse` handler accepts a function parameter of this type:
 
 
-.. ctype:: int (*visitproc)(PyObject *object, void *arg)
+.. c:type:: int (*visitproc)(PyObject *object, void *arg)
 
    Type of the visitor function passed to the :attr:`tp_traverse` handler.
    The function should be called with an object to traverse as *object* and
@@ -121,7 +121,7 @@
 The :attr:`tp_traverse` handler must have the following type:
 
 
-.. ctype:: int (*traverseproc)(PyObject *self, visitproc visit, void *arg)
+.. c:type:: int (*traverseproc)(PyObject *self, visitproc visit, void *arg)
 
    Traversal function for a container object.  Implementations must call the
    *visit* function for each object directly contained by *self*, with the
@@ -130,12 +130,12 @@
    object argument.  If *visit* returns a non-zero value that value should be
    returned immediately.
 
-To simplify writing :attr:`tp_traverse` handlers, a :cfunc:`Py_VISIT` macro is
+To simplify writing :attr:`tp_traverse` handlers, a :c:func:`Py_VISIT` macro is
 provided.  In order to use this macro, the :attr:`tp_traverse` implementation
 must name its arguments exactly *visit* and *arg*:
 
 
-.. cfunction:: void Py_VISIT(PyObject *o)
+.. c:function:: void Py_VISIT(PyObject *o)
 
    Call the *visit* callback, with arguments *o* and *arg*. If *visit* returns
    a non-zero value, then return it.  Using this macro, :attr:`tp_traverse`
@@ -151,15 +151,15 @@
 
    .. versionadded:: 2.4
 
-The :attr:`tp_clear` handler must be of the :ctype:`inquiry` type, or *NULL*
+The :attr:`tp_clear` handler must be of the :c:type:`inquiry` type, or *NULL*
 if the object is immutable.
 
 
-.. ctype:: int (*inquiry)(PyObject *self)
+.. c:type:: int (*inquiry)(PyObject *self)
 
    Drop references that may have created reference cycles.  Immutable objects
    do not have to define this method since they can never directly create
    reference cycles.  Note that the object must still be valid after calling
-   this method (don't just call :cfunc:`Py_DECREF` on a reference).  The
+   this method (don't just call :c:func:`Py_DECREF` on a reference).  The
    collector will call this method if it detects that this object is involved
    in a reference cycle.
diff --git a/Doc/c-api/gen.rst b/Doc/c-api/gen.rst
index 0d3789a..33cd27a 100644
--- a/Doc/c-api/gen.rst
+++ b/Doc/c-api/gen.rst
@@ -7,31 +7,31 @@
 
 Generator objects are what Python uses to implement generator iterators. They
 are normally created by iterating over a function that yields values, rather
-than explicitly calling :cfunc:`PyGen_New`.
+than explicitly calling :c:func:`PyGen_New`.
 
 
-.. ctype:: PyGenObject
+.. c:type:: PyGenObject
 
    The C structure used for generator objects.
 
 
-.. cvar:: PyTypeObject PyGen_Type
+.. c:var:: PyTypeObject PyGen_Type
 
    The type object corresponding to generator objects
 
 
-.. cfunction:: int PyGen_Check(ob)
+.. c:function:: int PyGen_Check(ob)
 
    Return true if *ob* is a generator object; *ob* must not be *NULL*.
 
 
-.. cfunction:: int PyGen_CheckExact(ob)
+.. c:function:: int PyGen_CheckExact(ob)
 
    Return true if *ob*'s type is *PyGen_Type* is a generator object; *ob* must not
    be *NULL*.
 
 
-.. cfunction:: PyObject* PyGen_New(PyFrameObject *frame)
+.. c:function:: PyObject* PyGen_New(PyFrameObject *frame)
 
    Create and return a new generator object based on the *frame* object. A
    reference to *frame* is stolen by this function. The parameter must not be
diff --git a/Doc/c-api/import.rst b/Doc/c-api/import.rst
index 3da1415..1929041 100644
--- a/Doc/c-api/import.rst
+++ b/Doc/c-api/import.rst
@@ -6,14 +6,14 @@
 =================
 
 
-.. cfunction:: PyObject* PyImport_ImportModule(const char *name)
+.. c:function:: PyObject* PyImport_ImportModule(const char *name)
 
    .. index::
       single: package variable; __all__
       single: __all__ (package variable)
       single: modules (in module sys)
 
-   This is a simplified interface to :cfunc:`PyImport_ImportModuleEx` below,
+   This is a simplified interface to :c:func:`PyImport_ImportModuleEx` below,
    leaving the *globals* and *locals* arguments set to *NULL* and *level* set
    to 0.  When the *name*
    argument contains a dot (when it specifies a submodule of a package), the
@@ -34,20 +34,20 @@
       Always uses absolute imports.
 
 
-.. cfunction:: PyObject* PyImport_ImportModuleNoBlock(const char *name)
+.. c:function:: PyObject* PyImport_ImportModuleNoBlock(const char *name)
 
-   This version of :cfunc:`PyImport_ImportModule` does not block. It's intended
+   This version of :c:func:`PyImport_ImportModule` does not block. It's intended
    to be used in C functions that import other modules to execute a function.
    The import may block if another thread holds the import lock. The function
-   :cfunc:`PyImport_ImportModuleNoBlock` never blocks. It first tries to fetch
-   the module from sys.modules and falls back to :cfunc:`PyImport_ImportModule`
+   :c:func:`PyImport_ImportModuleNoBlock` never blocks. It first tries to fetch
+   the module from sys.modules and falls back to :c:func:`PyImport_ImportModule`
    unless the lock is held, in which case the function will raise an
    :exc:`ImportError`.
 
    .. versionadded:: 2.6
 
 
-.. cfunction:: PyObject* PyImport_ImportModuleEx(char *name, PyObject *globals, PyObject *locals, PyObject *fromlist)
+.. c:function:: PyObject* PyImport_ImportModuleEx(char *name, PyObject *globals, PyObject *locals, PyObject *fromlist)
 
    .. index:: builtin: __import__
 
@@ -65,11 +65,11 @@
       Failing imports remove incomplete module objects.
 
    .. versionchanged:: 2.6
-      The function is an alias for :cfunc:`PyImport_ImportModuleLevel` with
+      The function is an alias for :c:func:`PyImport_ImportModuleLevel` with
       -1 as level, meaning relative import.
 
 
-.. cfunction:: PyObject* PyImport_ImportModuleLevel(char *name, PyObject *globals, PyObject *locals, PyObject *fromlist, int level)
+.. c:function:: PyObject* PyImport_ImportModuleLevel(char *name, PyObject *globals, PyObject *locals, PyObject *fromlist, int level)
 
    Import a module.  This is best described by referring to the built-in Python
    function :func:`__import__`, as the standard :func:`__import__` function calls
@@ -83,7 +83,7 @@
    .. versionadded:: 2.5
 
 
-.. cfunction:: PyObject* PyImport_Import(PyObject *name)
+.. c:function:: PyObject* PyImport_Import(PyObject *name)
 
    .. index::
       module: rexec
@@ -98,7 +98,7 @@
       Always uses absolute imports.
 
 
-.. cfunction:: PyObject* PyImport_ReloadModule(PyObject *m)
+.. c:function:: PyObject* PyImport_ReloadModule(PyObject *m)
 
    .. index:: builtin: reload
 
@@ -108,7 +108,7 @@
    with an exception set on failure (the module still exists in this case).
 
 
-.. cfunction:: PyObject* PyImport_AddModule(const char *name)
+.. c:function:: PyObject* PyImport_AddModule(const char *name)
 
    Return the module object corresponding to a module name.  The *name* argument
    may be of the form ``package.module``. First check the modules dictionary if
@@ -118,12 +118,12 @@
    .. note::
 
       This function does not load or import the module; if the module wasn't already
-      loaded, you will get an empty module object. Use :cfunc:`PyImport_ImportModule`
+      loaded, you will get an empty module object. Use :c:func:`PyImport_ImportModule`
       or one of its variants to import a module.  Package structures implied by a
       dotted name for *name* are not created if not already present.
 
 
-.. cfunction:: PyObject* PyImport_ExecCodeModule(char *name, PyObject *co)
+.. c:function:: PyObject* PyImport_ExecCodeModule(char *name, PyObject *co)
 
    .. index:: builtin: compile
 
@@ -133,7 +133,7 @@
    or *NULL* with an exception set if an error occurred.  Before Python 2.4, the
    module could still be created in error cases.  Starting with Python 2.4, *name*
    is removed from :attr:`sys.modules` in error cases, and even if *name* was already
-   in :attr:`sys.modules` on entry to :cfunc:`PyImport_ExecCodeModule`.  Leaving
+   in :attr:`sys.modules` on entry to :c:func:`PyImport_ExecCodeModule`.  Leaving
    incompletely initialized modules in :attr:`sys.modules` is dangerous, as imports of
    such modules have no way to know that the module object is an unknown (and
    probably damaged with respect to the module author's intents) state.
@@ -142,7 +142,7 @@
    :cmember:`co_filename`.
 
    This function will reload the module if it was already imported.  See
-   :cfunc:`PyImport_ReloadModule` for the intended way to reload a module.
+   :c:func:`PyImport_ReloadModule` for the intended way to reload a module.
 
    If *name* points to a dotted name of the form ``package.module``, any package
    structures not already created will still not be created.
@@ -151,26 +151,26 @@
       *name* is removed from :attr:`sys.modules` in error cases.
 
 
-.. cfunction:: PyObject* PyImport_ExecCodeModuleEx(char *name, PyObject *co, char *pathname)
+.. c:function:: PyObject* PyImport_ExecCodeModuleEx(char *name, PyObject *co, char *pathname)
 
-   Like :cfunc:`PyImport_ExecCodeModule`, but the :attr:`__file__` attribute of
+   Like :c:func:`PyImport_ExecCodeModule`, but the :attr:`__file__` attribute of
    the module object is set to *pathname* if it is non-``NULL``.
 
 
-.. cfunction:: long PyImport_GetMagicNumber()
+.. c:function:: long PyImport_GetMagicNumber()
 
    Return the magic number for Python bytecode files (a.k.a. :file:`.pyc` and
    :file:`.pyo` files).  The magic number should be present in the first four bytes
    of the bytecode file, in little-endian byte order.
 
 
-.. cfunction:: PyObject* PyImport_GetModuleDict()
+.. c:function:: PyObject* PyImport_GetModuleDict()
 
    Return the dictionary used for the module administration (a.k.a.
    ``sys.modules``).  Note that this is a per-interpreter variable.
 
 
-.. cfunction:: PyObject* PyImport_GetImporter(PyObject *path)
+.. c:function:: PyObject* PyImport_GetImporter(PyObject *path)
 
    Return an importer object for a :data:`sys.path`/:attr:`pkg.__path__` item
    *path*, possibly by fetching it from the :data:`sys.path_importer_cache`
@@ -183,41 +183,41 @@
    .. versionadded:: 2.6
 
 
-.. cfunction:: void _PyImport_Init()
+.. c:function:: void _PyImport_Init()
 
    Initialize the import mechanism.  For internal use only.
 
 
-.. cfunction:: void PyImport_Cleanup()
+.. c:function:: void PyImport_Cleanup()
 
    Empty the module table.  For internal use only.
 
 
-.. cfunction:: void _PyImport_Fini()
+.. c:function:: void _PyImport_Fini()
 
    Finalize the import mechanism.  For internal use only.
 
 
-.. cfunction:: PyObject* _PyImport_FindExtension(char *, char *)
+.. c:function:: PyObject* _PyImport_FindExtension(char *, char *)
 
    For internal use only.
 
 
-.. cfunction:: PyObject* _PyImport_FixupExtension(char *, char *)
+.. c:function:: PyObject* _PyImport_FixupExtension(char *, char *)
 
    For internal use only.
 
 
-.. cfunction:: int PyImport_ImportFrozenModule(char *name)
+.. c:function:: int PyImport_ImportFrozenModule(char *name)
 
    Load a frozen module named *name*.  Return ``1`` for success, ``0`` if the
    module is not found, and ``-1`` with an exception set if the initialization
    failed.  To access the imported module on a successful load, use
-   :cfunc:`PyImport_ImportModule`.  (Note the misnomer --- this function would
+   :c:func:`PyImport_ImportModule`.  (Note the misnomer --- this function would
    reload the module if it was already imported.)
 
 
-.. ctype:: struct _frozen
+.. c:type:: struct _frozen
 
    .. index:: single: freeze utility
 
@@ -233,30 +233,30 @@
       };
 
 
-.. cvar:: struct _frozen* PyImport_FrozenModules
+.. c:var:: struct _frozen* PyImport_FrozenModules
 
-   This pointer is initialized to point to an array of :ctype:`struct _frozen`
+   This pointer is initialized to point to an array of :c:type:`struct _frozen`
    records, terminated by one whose members are all *NULL* or zero.  When a frozen
    module is imported, it is searched in this table.  Third-party code could play
    tricks with this to provide a dynamically created collection of frozen modules.
 
 
-.. cfunction:: int PyImport_AppendInittab(const char *name, void (*initfunc)(void))
+.. c:function:: int PyImport_AppendInittab(const char *name, void (*initfunc)(void))
 
    Add a single module to the existing table of built-in modules.  This is a
-   convenience wrapper around :cfunc:`PyImport_ExtendInittab`, returning ``-1`` if
+   convenience wrapper around :c:func:`PyImport_ExtendInittab`, returning ``-1`` if
    the table could not be extended.  The new module can be imported by the name
    *name*, and uses the function *initfunc* as the initialization function called
    on the first attempted import.  This should be called before
-   :cfunc:`Py_Initialize`.
+   :c:func:`Py_Initialize`.
 
 
-.. ctype:: struct _inittab
+.. c:type:: struct _inittab
 
    Structure describing a single entry in the list of built-in modules.  Each of
    these structures gives the name and initialization function for a module built
    into the interpreter.  Programs which embed Python may use an array of these
-   structures in conjunction with :cfunc:`PyImport_ExtendInittab` to provide
+   structures in conjunction with :c:func:`PyImport_ExtendInittab` to provide
    additional built-in modules.  The structure is defined in
    :file:`Include/import.h` as::
 
@@ -266,11 +266,11 @@
       };
 
 
-.. cfunction:: int PyImport_ExtendInittab(struct _inittab *newtab)
+.. c:function:: int PyImport_ExtendInittab(struct _inittab *newtab)
 
    Add a collection of modules to the table of built-in modules.  The *newtab*
    array must end with a sentinel entry which contains *NULL* for the :attr:`name`
    field; failure to provide the sentinel value can result in a memory fault.
    Returns ``0`` on success or ``-1`` if insufficient memory could be allocated to
    extend the internal table.  In the event of failure, no modules are added to the
-   internal table.  This should be called before :cfunc:`Py_Initialize`.
+   internal table.  This should be called before :c:func:`Py_Initialize`.
diff --git a/Doc/c-api/init.rst b/Doc/c-api/init.rst
index a53b494..6c58c5d 100644
--- a/Doc/c-api/init.rst
+++ b/Doc/c-api/init.rst
@@ -12,7 +12,7 @@
 ===========================================
 
 
-.. cfunction:: void Py_Initialize()
+.. c:function:: void Py_Initialize()
 
    .. index::
       single: Py_SetProgramName()
@@ -31,40 +31,40 @@
 
    Initialize the Python interpreter.  In an application embedding  Python, this
    should be called before using any other Python/C API functions; with the
-   exception of :cfunc:`Py_SetProgramName`, :cfunc:`Py_SetPythonHome`, :cfunc:`PyEval_InitThreads`,
-   :cfunc:`PyEval_ReleaseLock`, and :cfunc:`PyEval_AcquireLock`. This initializes
+   exception of :c:func:`Py_SetProgramName`, :c:func:`Py_SetPythonHome`, :c:func:`PyEval_InitThreads`,
+   :c:func:`PyEval_ReleaseLock`, and :c:func:`PyEval_AcquireLock`. This initializes
    the table of loaded modules (``sys.modules``), and creates the fundamental
    modules :mod:`__builtin__`, :mod:`__main__` and :mod:`sys`.  It also initializes
    the module search path (``sys.path``). It does not set ``sys.argv``; use
-   :cfunc:`PySys_SetArgvEx` for that.  This is a no-op when called for a second time
-   (without calling :cfunc:`Py_Finalize` first).  There is no return value; it is a
+   :c:func:`PySys_SetArgvEx` for that.  This is a no-op when called for a second time
+   (without calling :c:func:`Py_Finalize` first).  There is no return value; it is a
    fatal error if the initialization fails.
 
 
-.. cfunction:: void Py_InitializeEx(int initsigs)
+.. c:function:: void Py_InitializeEx(int initsigs)
 
-   This function works like :cfunc:`Py_Initialize` if *initsigs* is 1. If
+   This function works like :c:func:`Py_Initialize` if *initsigs* is 1. If
    *initsigs* is 0, it skips initialization registration of signal handlers, which
    might be useful when Python is embedded.
 
    .. versionadded:: 2.4
 
 
-.. cfunction:: int Py_IsInitialized()
+.. c:function:: int Py_IsInitialized()
 
    Return true (nonzero) when the Python interpreter has been initialized, false
-   (zero) if not.  After :cfunc:`Py_Finalize` is called, this returns false until
-   :cfunc:`Py_Initialize` is called again.
+   (zero) if not.  After :c:func:`Py_Finalize` is called, this returns false until
+   :c:func:`Py_Initialize` is called again.
 
 
-.. cfunction:: void Py_Finalize()
+.. c:function:: void Py_Finalize()
 
-   Undo all initializations made by :cfunc:`Py_Initialize` and subsequent use of
+   Undo all initializations made by :c:func:`Py_Initialize` and subsequent use of
    Python/C API functions, and destroy all sub-interpreters (see
-   :cfunc:`Py_NewInterpreter` below) that were created and not yet destroyed since
-   the last call to :cfunc:`Py_Initialize`.  Ideally, this frees all memory
+   :c:func:`Py_NewInterpreter` below) that were created and not yet destroyed since
+   the last call to :c:func:`Py_Initialize`.  Ideally, this frees all memory
    allocated by the Python interpreter.  This is a no-op when called for a second
-   time (without calling :cfunc:`Py_Initialize` again first).  There is no return
+   time (without calling :c:func:`Py_Initialize` again first).  There is no return
    value; errors during finalization are ignored.
 
    This function is provided for a number of reasons.  An embedding application
@@ -83,25 +83,25 @@
    please report it).  Memory tied up in circular references between objects is not
    freed.  Some memory allocated by extension modules may not be freed.  Some
    extensions may not work properly if their initialization routine is called more
-   than once; this can happen if an application calls :cfunc:`Py_Initialize` and
-   :cfunc:`Py_Finalize` more than once.
+   than once; this can happen if an application calls :c:func:`Py_Initialize` and
+   :c:func:`Py_Finalize` more than once.
 
 
 Process-wide parameters
 =======================
 
 
-.. cfunction:: void Py_SetProgramName(char *name)
+.. c:function:: void Py_SetProgramName(char *name)
 
    .. index::
       single: Py_Initialize()
       single: main()
       single: Py_GetPath()
 
-   This function should be called before :cfunc:`Py_Initialize` is called for
+   This function should be called before :c:func:`Py_Initialize` is called for
    the first time, if it is called at all.  It tells the interpreter the value
-   of the ``argv[0]`` argument to the :cfunc:`main` function of the program.
-   This is used by :cfunc:`Py_GetPath` and some other functions below to find
+   of the ``argv[0]`` argument to the :c:func:`main` function of the program.
+   This is used by :c:func:`Py_GetPath` and some other functions below to find
    the Python run-time libraries relative to the interpreter executable.  The
    default value is ``'python'``.  The argument should point to a
    zero-terminated character string in static storage whose contents will not
@@ -109,20 +109,20 @@
    interpreter will change the contents of this storage.
 
 
-.. cfunction:: char* Py_GetProgramName()
+.. c:function:: char* Py_GetProgramName()
 
    .. index:: single: Py_SetProgramName()
 
-   Return the program name set with :cfunc:`Py_SetProgramName`, or the default.
+   Return the program name set with :c:func:`Py_SetProgramName`, or the default.
    The returned string points into static storage; the caller should not modify its
    value.
 
 
-.. cfunction:: char* Py_GetPrefix()
+.. c:function:: char* Py_GetPrefix()
 
    Return the *prefix* for installed platform-independent files. This is derived
    through a number of complicated rules from the program name set with
-   :cfunc:`Py_SetProgramName` and some environment variables; for example, if the
+   :c:func:`Py_SetProgramName` and some environment variables; for example, if the
    program name is ``'/usr/local/bin/python'``, the prefix is ``'/usr/local'``. The
    returned string points into static storage; the caller should not modify its
    value.  This corresponds to the :makevar:`prefix` variable in the top-level
@@ -131,11 +131,11 @@
    It is only useful on Unix.  See also the next function.
 
 
-.. cfunction:: char* Py_GetExecPrefix()
+.. c:function:: char* Py_GetExecPrefix()
 
    Return the *exec-prefix* for installed platform-*dependent* files.  This is
    derived through a number of complicated rules from the program name set with
-   :cfunc:`Py_SetProgramName` and some environment variables; for example, if the
+   :c:func:`Py_SetProgramName` and some environment variables; for example, if the
    program name is ``'/usr/local/bin/python'``, the exec-prefix is
    ``'/usr/local'``.  The returned string points into static storage; the caller
    should not modify its value.  This corresponds to the :makevar:`exec_prefix`
@@ -166,7 +166,7 @@
    platform.
 
 
-.. cfunction:: char* Py_GetProgramFullPath()
+.. c:function:: char* Py_GetProgramFullPath()
 
    .. index::
       single: Py_SetProgramName()
@@ -174,19 +174,19 @@
 
    Return the full program name of the Python executable; this is  computed as a
    side-effect of deriving the default module search path  from the program name
-   (set by :cfunc:`Py_SetProgramName` above). The returned string points into
+   (set by :c:func:`Py_SetProgramName` above). The returned string points into
    static storage; the caller should not modify its value.  The value is available
    to Python code as ``sys.executable``.
 
 
-.. cfunction:: char* Py_GetPath()
+.. c:function:: char* Py_GetPath()
 
    .. index::
       triple: module; search; path
       single: path (in module sys)
 
    Return the default module search path; this is computed from the program name
-   (set by :cfunc:`Py_SetProgramName` above) and some environment variables.
+   (set by :c:func:`Py_SetProgramName` above) and some environment variables.
    The returned string consists of a series of directory names separated by a
    platform dependent delimiter character.  The delimiter character is ``':'``
    on Unix and Mac OS X, ``';'`` on Windows.  The returned string points into
@@ -198,7 +198,7 @@
    .. XXX should give the exact rules
 
 
-.. cfunction:: const char* Py_GetVersion()
+.. c:function:: const char* Py_GetVersion()
 
    Return the version of this Python interpreter.  This is a string that looks
    something like ::
@@ -213,7 +213,7 @@
    modify its value.  The value is available to Python code as ``sys.version``.
 
 
-.. cfunction:: const char* Py_GetPlatform()
+.. c:function:: const char* Py_GetPlatform()
 
    .. index:: single: platform (in module sys)
 
@@ -226,7 +226,7 @@
    to Python code as ``sys.platform``.
 
 
-.. cfunction:: const char* Py_GetCopyright()
+.. c:function:: const char* Py_GetCopyright()
 
    Return the official copyright string for the current Python version, for example
 
@@ -238,7 +238,7 @@
    value.  The value is available to Python code as ``sys.copyright``.
 
 
-.. cfunction:: const char* Py_GetCompiler()
+.. c:function:: const char* Py_GetCompiler()
 
    Return an indication of the compiler used to build the current Python version,
    in square brackets, for example::
@@ -252,7 +252,7 @@
    ``sys.version``.
 
 
-.. cfunction:: const char* Py_GetBuildInfo()
+.. c:function:: const char* Py_GetBuildInfo()
 
    Return information about the sequence number and build date and time  of the
    current Python interpreter instance, for example ::
@@ -266,7 +266,7 @@
    ``sys.version``.
 
 
-.. cfunction:: void PySys_SetArgvEx(int argc, char **argv, int updatepath)
+.. c:function:: void PySys_SetArgvEx(int argc, char **argv, int updatepath)
 
    .. index::
       single: main()
@@ -274,12 +274,12 @@
       single: argv (in module sys)
 
    Set :data:`sys.argv` based on *argc* and *argv*.  These parameters are
-   similar to those passed to the program's :cfunc:`main` function with the
+   similar to those passed to the program's :c:func:`main` function with the
    difference that the first entry should refer to the script file to be
    executed rather than the executable hosting the Python interpreter.  If there
    isn't a script that will be run, the first entry in *argv* can be an empty
    string.  If this function fails to initialize :data:`sys.argv`, a fatal
-   condition is signalled using :cfunc:`Py_FatalError`.
+   condition is signalled using :c:func:`Py_FatalError`.
 
    If *updatepath* is zero, this is all the function does.  If *updatepath*
    is non-zero, the function also modifies :data:`sys.path` according to the
@@ -301,7 +301,7 @@
 
       On versions before 2.6.6, you can achieve the same effect by manually
       popping the first :data:`sys.path` element after having called
-      :cfunc:`PySys_SetArgv`, for example using::
+      :c:func:`PySys_SetArgv`, for example using::
 
          PyRun_SimpleString("import sys; sys.path.pop(0)\n");
 
@@ -311,12 +311,12 @@
       check w/ Guido.
 
 
-.. cfunction:: void PySys_SetArgv(int argc, char **argv)
+.. c:function:: void PySys_SetArgv(int argc, char **argv)
 
-   This function works like :cfunc:`PySys_SetArgvEx` with *updatepath* set to 1.
+   This function works like :c:func:`PySys_SetArgvEx` with *updatepath* set to 1.
 
 
-.. cfunction:: void Py_SetPythonHome(char *home)
+.. c:function:: void Py_SetPythonHome(char *home)
 
    Set the default "home" directory, that is, the location of the standard
    Python libraries.  See :envvar:`PYTHONHOME` for the meaning of the
@@ -328,10 +328,10 @@
    this storage.
 
 
-.. cfunction:: char* Py_GetPythonHome()
+.. c:function:: char* Py_GetPythonHome()
 
    Return the default "home", that is, the value set by a previous call to
-   :cfunc:`Py_SetPythonHome`, or the value of the :envvar:`PYTHONHOME`
+   :c:func:`Py_SetPythonHome`, or the value of the :envvar:`PYTHONHOME`
    environment variable if it is set.
 
 
@@ -368,9 +368,9 @@
    single: PyThreadState
 
 The Python interpreter keeps some thread-specific bookkeeping information
-inside a data structure called :ctype:`PyThreadState`.  There's also one
-global variable pointing to the current :ctype:`PyThreadState`: it can
-be retrieved using :cfunc:`PyThreadState_Get`.
+inside a data structure called :c:type:`PyThreadState`.  There's also one
+global variable pointing to the current :c:type:`PyThreadState`: it can
+be retrieved using :c:func:`PyThreadState_Get`.
 
 Releasing the GIL from extension code
 -------------------------------------
@@ -394,8 +394,8 @@
    single: Py_BEGIN_ALLOW_THREADS
    single: Py_END_ALLOW_THREADS
 
-The :cmacro:`Py_BEGIN_ALLOW_THREADS` macro opens a new block and declares a
-hidden local variable; the :cmacro:`Py_END_ALLOW_THREADS` macro closes the
+The :c:macro:`Py_BEGIN_ALLOW_THREADS` macro opens a new block and declares a
+hidden local variable; the :c:macro:`Py_END_ALLOW_THREADS` macro closes the
 block.  These two macros are still available when Python is compiled without
 thread support (they simply have an empty expansion).
 
@@ -445,7 +445,7 @@
 API.  When you are done, you should reset the thread state pointer, release
 the GIL, and finally free the thread state data structure.
 
-The :cfunc:`PyGILState_Ensure` and :cfunc:`PyGILState_Release` functions do
+The :c:func:`PyGILState_Ensure` and :c:func:`PyGILState_Release` functions do
 all of the above automatically.  The typical idiom for calling into Python
 from a C thread is::
 
@@ -459,14 +459,14 @@
    /* Release the thread. No Python API allowed beyond this point. */
    PyGILState_Release(gstate);
 
-Note that the :cfunc:`PyGILState_\*` functions assume there is only one global
-interpreter (created automatically by :cfunc:`Py_Initialize`).  Python
+Note that the :c:func:`PyGILState_\*` functions assume there is only one global
+interpreter (created automatically by :c:func:`Py_Initialize`).  Python
 supports the creation of additional interpreters (using
-:cfunc:`Py_NewInterpreter`), but mixing multiple interpreters and the
-:cfunc:`PyGILState_\*` API is unsupported.
+:c:func:`Py_NewInterpreter`), but mixing multiple interpreters and the
+:c:func:`PyGILState_\*` API is unsupported.
 
 Another important thing to note about threads is their behaviour in the face
-of the C :cfunc:`fork` call. On most systems with :cfunc:`fork`, after a
+of the C :c:func:`fork` call. On most systems with :c:func:`fork`, after a
 process forks only the thread that issued the fork will exist. That also
 means any locks held by other threads will never be released. Python solves
 this for :func:`os.fork` by acquiring the locks it uses internally before
@@ -474,12 +474,12 @@
 :ref:`lock-objects` in the child. When extending or embedding Python, there
 is no way to inform Python of additional (non-Python) locks that need to be
 acquired before or reset after a fork. OS facilities such as
-:cfunc:`pthread_atfork` would need to be used to accomplish the same thing.
-Additionally, when extending or embedding Python, calling :cfunc:`fork`
+:c:func:`pthread_atfork` would need to be used to accomplish the same thing.
+Additionally, when extending or embedding Python, calling :c:func:`fork`
 directly rather than through :func:`os.fork` (and returning to or calling
 into Python) may result in a deadlock by one of Python's internal locks
 being held by a thread that is defunct after the fork.
-:cfunc:`PyOS_AfterFork` tries to reset the necessary locks, but is not
+:c:func:`PyOS_AfterFork` tries to reset the necessary locks, but is not
 always able to.
 
 
@@ -489,7 +489,7 @@
 These are the most commonly used types and functions when writing C extension
 code, or when embedding the Python interpreter:
 
-.. ctype:: PyInterpreterState
+.. c:type:: PyInterpreterState
 
    This data structure represents the state shared by a number of cooperating
    threads.  Threads belonging to the same interpreter share their module
@@ -502,14 +502,14 @@
    interpreter they belong.
 
 
-.. ctype:: PyThreadState
+.. c:type:: PyThreadState
 
    This data structure represents the state of a single thread.  The only public
-   data member is :ctype:`PyInterpreterState \*`:attr:`interp`, which points to
+   data member is :c:type:`PyInterpreterState \*`:attr:`interp`, which points to
    this thread's interpreter state.
 
 
-.. cfunction:: void PyEval_InitThreads()
+.. c:function:: void PyEval_InitThreads()
 
    .. index::
       single: PyEval_ReleaseLock()
@@ -519,14 +519,14 @@
 
    Initialize and acquire the global interpreter lock.  It should be called in the
    main thread before creating a second thread or engaging in any other thread
-   operations such as :cfunc:`PyEval_ReleaseLock` or
+   operations such as :c:func:`PyEval_ReleaseLock` or
    ``PyEval_ReleaseThread(tstate)``. It is not needed before calling
-   :cfunc:`PyEval_SaveThread` or :cfunc:`PyEval_RestoreThread`.
+   :c:func:`PyEval_SaveThread` or :c:func:`PyEval_RestoreThread`.
 
    .. index:: single: Py_Initialize()
 
    This is a no-op when called for a second time.  It is safe to call this function
-   before calling :cfunc:`Py_Initialize`.
+   before calling :c:func:`Py_Initialize`.
 
    .. index:: module: thread
 
@@ -539,7 +539,7 @@
       when this function initializes the global interpreter lock, it also acquires
       it.  Before the Python :mod:`_thread` module creates a new thread, knowing
       that either it has the lock or the lock hasn't been created yet, it calls
-      :cfunc:`PyEval_InitThreads`.  When this call returns, it is guaranteed that
+      :c:func:`PyEval_InitThreads`.  When this call returns, it is guaranteed that
       the lock has been created and that the calling thread has acquired it.
 
       It is **not** safe to call this function when it is unknown which thread (if
@@ -548,9 +548,9 @@
       This function is not available when thread support is disabled at compile time.
 
 
-.. cfunction:: int PyEval_ThreadsInitialized()
+.. c:function:: int PyEval_ThreadsInitialized()
 
-   Returns a non-zero value if :cfunc:`PyEval_InitThreads` has been called.  This
+   Returns a non-zero value if :c:func:`PyEval_InitThreads` has been called.  This
    function can be called without holding the GIL, and therefore can be used to
    avoid calls to the locking API when running single-threaded.  This function is
    not available when thread support is disabled at compile time.
@@ -558,7 +558,7 @@
    .. versionadded:: 2.4
 
 
-.. cfunction:: PyThreadState* PyEval_SaveThread()
+.. c:function:: PyThreadState* PyEval_SaveThread()
 
    Release the global interpreter lock (if it has been created and thread
    support is enabled) and reset the thread state to *NULL*, returning the
@@ -567,7 +567,7 @@
    when thread support is disabled at compile time.)
 
 
-.. cfunction:: void PyEval_RestoreThread(PyThreadState *tstate)
+.. c:function:: void PyEval_RestoreThread(PyThreadState *tstate)
 
    Acquire the global interpreter lock (if it has been created and thread
    support is enabled) and set the thread state to *tstate*, which must not be
@@ -576,23 +576,23 @@
    when thread support is disabled at compile time.)
 
 
-.. cfunction:: PyThreadState* PyThreadState_Get()
+.. c:function:: PyThreadState* PyThreadState_Get()
 
    Return the current thread state.  The global interpreter lock must be held.
    When the current thread state is *NULL*, this issues a fatal error (so that
    the caller needn't check for *NULL*).
 
 
-.. cfunction:: PyThreadState* PyThreadState_Swap(PyThreadState *tstate)
+.. c:function:: PyThreadState* PyThreadState_Swap(PyThreadState *tstate)
 
    Swap the current thread state with the thread state given by the argument
    *tstate*, which may be *NULL*.  The global interpreter lock must be held
    and is not released.
 
 
-.. cfunction:: void PyEval_ReInitThreads()
+.. c:function:: void PyEval_ReInitThreads()
 
-   This function is called from :cfunc:`PyOS_AfterFork` to ensure that newly
+   This function is called from :c:func:`PyOS_AfterFork` to ensure that newly
    created child processes don't hold locks referring to threads which
    are not running in the child process.
 
@@ -600,24 +600,24 @@
 The following functions use thread-local storage, and are not compatible
 with sub-interpreters:
 
-.. cfunction:: PyGILState_STATE PyGILState_Ensure()
+.. c:function:: PyGILState_STATE PyGILState_Ensure()
 
    Ensure that the current thread is ready to call the Python C API regardless
    of the current state of Python, or of the global interpreter lock. This may
    be called as many times as desired by a thread as long as each call is
-   matched with a call to :cfunc:`PyGILState_Release`. In general, other
-   thread-related APIs may be used between :cfunc:`PyGILState_Ensure` and
-   :cfunc:`PyGILState_Release` calls as long as the thread state is restored to
+   matched with a call to :c:func:`PyGILState_Release`. In general, other
+   thread-related APIs may be used between :c:func:`PyGILState_Ensure` and
+   :c:func:`PyGILState_Release` calls as long as the thread state is restored to
    its previous state before the Release().  For example, normal usage of the
-   :cmacro:`Py_BEGIN_ALLOW_THREADS` and :cmacro:`Py_END_ALLOW_THREADS` macros is
+   :c:macro:`Py_BEGIN_ALLOW_THREADS` and :c:macro:`Py_END_ALLOW_THREADS` macros is
    acceptable.
 
    The return value is an opaque "handle" to the thread state when
-   :cfunc:`PyGILState_Ensure` was called, and must be passed to
-   :cfunc:`PyGILState_Release` to ensure Python is left in the same state. Even
+   :c:func:`PyGILState_Ensure` was called, and must be passed to
+   :c:func:`PyGILState_Release` to ensure Python is left in the same state. Even
    though recursive calls are allowed, these handles *cannot* be shared - each
-   unique call to :cfunc:`PyGILState_Ensure` must save the handle for its call
-   to :cfunc:`PyGILState_Release`.
+   unique call to :c:func:`PyGILState_Ensure` must save the handle for its call
+   to :c:func:`PyGILState_Release`.
 
    When the function returns, the current thread will hold the GIL and be able
    to call arbitrary Python code.  Failure is a fatal error.
@@ -625,20 +625,20 @@
    .. versionadded:: 2.3
 
 
-.. cfunction:: void PyGILState_Release(PyGILState_STATE)
+.. c:function:: void PyGILState_Release(PyGILState_STATE)
 
    Release any resources previously acquired.  After this call, Python's state will
-   be the same as it was prior to the corresponding :cfunc:`PyGILState_Ensure` call
+   be the same as it was prior to the corresponding :c:func:`PyGILState_Ensure` call
    (but generally this state will be unknown to the caller, hence the use of the
    GILState API).
 
-   Every call to :cfunc:`PyGILState_Ensure` must be matched by a call to
-   :cfunc:`PyGILState_Release` on the same thread.
+   Every call to :c:func:`PyGILState_Ensure` must be matched by a call to
+   :c:func:`PyGILState_Release` on the same thread.
 
    .. versionadded:: 2.3
 
 
-.. cfunction:: PyThreadState PyGILState_GetThisThreadState()
+.. c:function:: PyThreadState PyGILState_GetThisThreadState()
 
    Get the current thread state for this thread.  May return ``NULL`` if no
    GILState API has been used on the current thread.  Note that the main thread
@@ -652,33 +652,33 @@
 example usage in the Python source distribution.
 
 
-.. cmacro:: Py_BEGIN_ALLOW_THREADS
+.. c:macro:: Py_BEGIN_ALLOW_THREADS
 
    This macro expands to ``{ PyThreadState *_save; _save = PyEval_SaveThread();``.
    Note that it contains an opening brace; it must be matched with a following
-   :cmacro:`Py_END_ALLOW_THREADS` macro.  See above for further discussion of this
+   :c:macro:`Py_END_ALLOW_THREADS` macro.  See above for further discussion of this
    macro.  It is a no-op when thread support is disabled at compile time.
 
 
-.. cmacro:: Py_END_ALLOW_THREADS
+.. c:macro:: Py_END_ALLOW_THREADS
 
    This macro expands to ``PyEval_RestoreThread(_save); }``. Note that it contains
    a closing brace; it must be matched with an earlier
-   :cmacro:`Py_BEGIN_ALLOW_THREADS` macro.  See above for further discussion of
+   :c:macro:`Py_BEGIN_ALLOW_THREADS` macro.  See above for further discussion of
    this macro.  It is a no-op when thread support is disabled at compile time.
 
 
-.. cmacro:: Py_BLOCK_THREADS
+.. c:macro:: Py_BLOCK_THREADS
 
    This macro expands to ``PyEval_RestoreThread(_save);``: it is equivalent to
-   :cmacro:`Py_END_ALLOW_THREADS` without the closing brace.  It is a no-op when
+   :c:macro:`Py_END_ALLOW_THREADS` without the closing brace.  It is a no-op when
    thread support is disabled at compile time.
 
 
-.. cmacro:: Py_UNBLOCK_THREADS
+.. c:macro:: Py_UNBLOCK_THREADS
 
    This macro expands to ``_save = PyEval_SaveThread();``: it is equivalent to
-   :cmacro:`Py_BEGIN_ALLOW_THREADS` without the opening brace and variable
+   :c:macro:`Py_BEGIN_ALLOW_THREADS` without the opening brace and variable
    declaration.  It is a no-op when thread support is disabled at compile time.
 
 
@@ -690,47 +690,47 @@
 been created.
 
 
-.. cfunction:: PyInterpreterState* PyInterpreterState_New()
+.. c:function:: PyInterpreterState* PyInterpreterState_New()
 
    Create a new interpreter state object.  The global interpreter lock need not
    be held, but may be held if it is necessary to serialize calls to this
    function.
 
 
-.. cfunction:: void PyInterpreterState_Clear(PyInterpreterState *interp)
+.. c:function:: void PyInterpreterState_Clear(PyInterpreterState *interp)
 
    Reset all information in an interpreter state object.  The global interpreter
    lock must be held.
 
 
-.. cfunction:: void PyInterpreterState_Delete(PyInterpreterState *interp)
+.. c:function:: void PyInterpreterState_Delete(PyInterpreterState *interp)
 
    Destroy an interpreter state object.  The global interpreter lock need not be
    held.  The interpreter state must have been reset with a previous call to
-   :cfunc:`PyInterpreterState_Clear`.
+   :c:func:`PyInterpreterState_Clear`.
 
 
-.. cfunction:: PyThreadState* PyThreadState_New(PyInterpreterState *interp)
+.. c:function:: PyThreadState* PyThreadState_New(PyInterpreterState *interp)
 
    Create a new thread state object belonging to the given interpreter object.
    The global interpreter lock need not be held, but may be held if it is
    necessary to serialize calls to this function.
 
 
-.. cfunction:: void PyThreadState_Clear(PyThreadState *tstate)
+.. c:function:: void PyThreadState_Clear(PyThreadState *tstate)
 
    Reset all information in a thread state object.  The global interpreter lock
    must be held.
 
 
-.. cfunction:: void PyThreadState_Delete(PyThreadState *tstate)
+.. c:function:: void PyThreadState_Delete(PyThreadState *tstate)
 
    Destroy a thread state object.  The global interpreter lock need not be held.
    The thread state must have been reset with a previous call to
-   :cfunc:`PyThreadState_Clear`.
+   :c:func:`PyThreadState_Clear`.
 
 
-.. cfunction:: PyObject* PyThreadState_GetDict()
+.. c:function:: PyObject* PyThreadState_GetDict()
 
    Return a dictionary in which extensions can store thread-specific state
    information.  Each extension should use a unique key to use to store state in
@@ -743,7 +743,7 @@
       meant that an exception was raised.
 
 
-.. cfunction:: int PyThreadState_SetAsyncExc(long id, PyObject *exc)
+.. c:function:: int PyThreadState_SetAsyncExc(long id, PyObject *exc)
 
    Asynchronously raise an exception in a thread. The *id* argument is the thread
    id of the target thread; *exc* is the exception object to be raised. This
@@ -756,18 +756,18 @@
    .. versionadded:: 2.3
 
 
-.. cfunction:: void PyEval_AcquireThread(PyThreadState *tstate)
+.. c:function:: void PyEval_AcquireThread(PyThreadState *tstate)
 
    Acquire the global interpreter lock and set the current thread state to
    *tstate*, which should not be *NULL*.  The lock must have been created earlier.
    If this thread already has the lock, deadlock ensues.
 
-   :cfunc:`PyEval_RestoreThread` is a higher-level function which is always
+   :c:func:`PyEval_RestoreThread` is a higher-level function which is always
    available (even when thread support isn't enabled or when threads have
    not been initialized).
 
 
-.. cfunction:: void PyEval_ReleaseThread(PyThreadState *tstate)
+.. c:function:: void PyEval_ReleaseThread(PyThreadState *tstate)
 
    Reset the current thread state to *NULL* and release the global interpreter
    lock.  The lock must have been created earlier and must be held by the current
@@ -775,29 +775,29 @@
    that it represents the current thread state --- if it isn't, a fatal error is
    reported.
 
-   :cfunc:`PyEval_SaveThread` is a higher-level function which is always
+   :c:func:`PyEval_SaveThread` is a higher-level function which is always
    available (even when thread support isn't enabled or when threads have
    not been initialized).
 
 
-.. cfunction:: void PyEval_AcquireLock()
+.. c:function:: void PyEval_AcquireLock()
 
    Acquire the global interpreter lock.  The lock must have been created earlier.
    If this thread already has the lock, a deadlock ensues.
 
    .. warning::
       This function does not change the current thread state.  Please use
-      :cfunc:`PyEval_RestoreThread` or :cfunc:`PyEval_AcquireThread`
+      :c:func:`PyEval_RestoreThread` or :c:func:`PyEval_AcquireThread`
       instead.
 
 
-.. cfunction:: void PyEval_ReleaseLock()
+.. c:function:: void PyEval_ReleaseLock()
 
    Release the global interpreter lock.  The lock must have been created earlier.
 
    .. warning::
       This function does not change the current thread state.  Please use
-      :cfunc:`PyEval_SaveThread` or :cfunc:`PyEval_ReleaseThread`
+      :c:func:`PyEval_SaveThread` or :c:func:`PyEval_ReleaseThread`
       instead.
 
 
@@ -808,11 +808,11 @@
 are cases where you need to create several independent interpreters in the
 same process and perhaps even in the same thread.  Sub-interpreters allow
 you to do that.  You can switch between sub-interpreters using the
-:cfunc:`PyThreadState_Swap` function.  You can create and destroy them
+:c:func:`PyThreadState_Swap` function.  You can create and destroy them
 using the following functions:
 
 
-.. cfunction:: PyThreadState* Py_NewInterpreter()
+.. c:function:: PyThreadState* Py_NewInterpreter()
 
    .. index::
       module: builtins
@@ -854,13 +854,13 @@
    and filled with the contents of this copy; the extension's ``init`` function is
    not called.  Note that this is different from what happens when an extension is
    imported after the interpreter has been completely re-initialized by calling
-   :cfunc:`Py_Finalize` and :cfunc:`Py_Initialize`; in that case, the extension's
+   :c:func:`Py_Finalize` and :c:func:`Py_Initialize`; in that case, the extension's
    ``initmodule`` function *is* called again.
 
    .. index:: single: close() (in module os)
 
 
-.. cfunction:: void Py_EndInterpreter(PyThreadState *tstate)
+.. c:function:: void Py_EndInterpreter(PyThreadState *tstate)
 
    .. index:: single: Py_Finalize()
 
@@ -869,7 +869,7 @@
    states below.  When the call returns, the current thread state is *NULL*.  All
    thread states associated with this interpreter are destroyed.  (The global
    interpreter lock must be held before calling this function and is still held
-   when it returns.)  :cfunc:`Py_Finalize` will destroy all sub-interpreters that
+   when it returns.)  :c:func:`Py_Finalize` will destroy all sub-interpreters that
    haven't been explicitly destroyed at that point.
 
 
@@ -890,11 +890,11 @@
 by such objects may affect the wrong (sub-)interpreter's dictionary of loaded
 modules.
 
-Also note that combining this functionality with :cfunc:`PyGILState_\*` APIs
+Also note that combining this functionality with :c:func:`PyGILState_\*` APIs
 is delicate, because these APIs assume a bijection between Python thread states
 and OS-level threads, an assumption broken by the presence of sub-interpreters.
 It is highly recommended that you don't switch sub-interpreters between a pair
-of matching :cfunc:`PyGILState_Ensure` and :cfunc:`PyGILState_Release` calls.
+of matching :c:func:`PyGILState_Ensure` and :c:func:`PyGILState_Release` calls.
 Furthermore, extensions (such as :mod:`ctypes`) using these APIs to allow calling
 of Python code from non-Python created threads will probably be broken when using
 sub-interpreters.
@@ -916,7 +916,7 @@
 main thread where it has possession of the global interpreter lock and can
 perform any Python API calls.
 
-.. cfunction:: int Py_AddPendingCall(int (*func)(void *), void *arg)
+.. c:function:: int Py_AddPendingCall(int (*func)(void *), void *arg)
 
    .. index:: single: Py_AddPendingCall()
 
@@ -964,10 +964,10 @@
 in previous versions.
 
 
-.. ctype:: int (*Py_tracefunc)(PyObject *obj, PyFrameObject *frame, int what, PyObject *arg)
+.. c:type:: int (*Py_tracefunc)(PyObject *obj, PyFrameObject *frame, int what, PyObject *arg)
 
-   The type of the trace function registered using :cfunc:`PyEval_SetProfile` and
-   :cfunc:`PyEval_SetTrace`. The first parameter is the object passed to the
+   The type of the trace function registered using :c:func:`PyEval_SetProfile` and
+   :c:func:`PyEval_SetTrace`. The first parameter is the object passed to the
    registration function as *obj*, *frame* is the frame object to which the event
    pertains, *what* is one of the constants :const:`PyTrace_CALL`,
    :const:`PyTrace_EXCEPTION`, :const:`PyTrace_LINE`, :const:`PyTrace_RETURN`,
@@ -995,18 +995,18 @@
    +------------------------------+--------------------------------------+
 
 
-.. cvar:: int PyTrace_CALL
+.. c:var:: int PyTrace_CALL
 
-   The value of the *what* parameter to a :ctype:`Py_tracefunc` function when a new
+   The value of the *what* parameter to a :c:type:`Py_tracefunc` function when a new
    call to a function or method is being reported, or a new entry into a generator.
    Note that the creation of the iterator for a generator function is not reported
    as there is no control transfer to the Python bytecode in the corresponding
    frame.
 
 
-.. cvar:: int PyTrace_EXCEPTION
+.. c:var:: int PyTrace_EXCEPTION
 
-   The value of the *what* parameter to a :ctype:`Py_tracefunc` function when an
+   The value of the *what* parameter to a :c:type:`Py_tracefunc` function when an
    exception has been raised.  The callback function is called with this value for
    *what* when after any bytecode is processed after which the exception becomes
    set within the frame being executed.  The effect of this is that as exception
@@ -1015,37 +1015,37 @@
    these events; they are not needed by the profiler.
 
 
-.. cvar:: int PyTrace_LINE
+.. c:var:: int PyTrace_LINE
 
    The value passed as the *what* parameter to a trace function (but not a
    profiling function) when a line-number event is being reported.
 
 
-.. cvar:: int PyTrace_RETURN
+.. c:var:: int PyTrace_RETURN
 
-   The value for the *what* parameter to :ctype:`Py_tracefunc` functions when a
+   The value for the *what* parameter to :c:type:`Py_tracefunc` functions when a
    call is returning without propagating an exception.
 
 
-.. cvar:: int PyTrace_C_CALL
+.. c:var:: int PyTrace_C_CALL
 
-   The value for the *what* parameter to :ctype:`Py_tracefunc` functions when a C
+   The value for the *what* parameter to :c:type:`Py_tracefunc` functions when a C
    function is about to be called.
 
 
-.. cvar:: int PyTrace_C_EXCEPTION
+.. c:var:: int PyTrace_C_EXCEPTION
 
-   The value for the *what* parameter to :ctype:`Py_tracefunc` functions when a C
+   The value for the *what* parameter to :c:type:`Py_tracefunc` functions when a C
    function has raised an exception.
 
 
-.. cvar:: int PyTrace_C_RETURN
+.. c:var:: int PyTrace_C_RETURN
 
-   The value for the *what* parameter to :ctype:`Py_tracefunc` functions when a C
+   The value for the *what* parameter to :c:type:`Py_tracefunc` functions when a C
    function has returned.
 
 
-.. cfunction:: void PyEval_SetProfile(Py_tracefunc func, PyObject *obj)
+.. c:function:: void PyEval_SetProfile(Py_tracefunc func, PyObject *obj)
 
    Set the profiler function to *func*.  The *obj* parameter is passed to the
    function as its first parameter, and may be any Python object, or *NULL*.  If
@@ -1055,13 +1055,13 @@
    events.
 
 
-.. cfunction:: void PyEval_SetTrace(Py_tracefunc func, PyObject *obj)
+.. c:function:: void PyEval_SetTrace(Py_tracefunc func, PyObject *obj)
 
    Set the tracing function to *func*.  This is similar to
-   :cfunc:`PyEval_SetProfile`, except the tracing function does receive line-number
+   :c:func:`PyEval_SetProfile`, except the tracing function does receive line-number
    events.
 
-.. cfunction:: PyObject* PyEval_GetCallStats(PyObject *self)
+.. c:function:: PyObject* PyEval_GetCallStats(PyObject *self)
 
    Return a tuple of function call counts.  There are constants defined for the
    positions within the tuple:
@@ -1113,14 +1113,14 @@
 These functions are only intended to be used by advanced debugging tools.
 
 
-.. cfunction:: PyInterpreterState* PyInterpreterState_Head()
+.. c:function:: PyInterpreterState* PyInterpreterState_Head()
 
    Return the interpreter state object at the head of the list of all such objects.
 
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyInterpreterState* PyInterpreterState_Next(PyInterpreterState *interp)
+.. c:function:: PyInterpreterState* PyInterpreterState_Next(PyInterpreterState *interp)
 
    Return the next interpreter state object after *interp* from the list of all
    such objects.
@@ -1128,18 +1128,18 @@
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyThreadState * PyInterpreterState_ThreadHead(PyInterpreterState *interp)
+.. c:function:: PyThreadState * PyInterpreterState_ThreadHead(PyInterpreterState *interp)
 
-   Return the a pointer to the first :ctype:`PyThreadState` object in the list of
+   Return the a pointer to the first :c:type:`PyThreadState` object in the list of
    threads associated with the interpreter *interp*.
 
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyThreadState* PyThreadState_Next(PyThreadState *tstate)
+.. c:function:: PyThreadState* PyThreadState_Next(PyThreadState *tstate)
 
    Return the next thread state object after *tstate* from the list of all such
-   objects belonging to the same :ctype:`PyInterpreterState` object.
+   objects belonging to the same :c:type:`PyInterpreterState` object.
 
    .. versionadded:: 2.2
 
diff --git a/Doc/c-api/int.rst b/Doc/c-api/int.rst
index c561bc2..254219c 100644
--- a/Doc/c-api/int.rst
+++ b/Doc/c-api/int.rst
@@ -8,39 +8,39 @@
 .. index:: object: integer
 
 
-.. ctype:: PyIntObject
+.. c:type:: PyIntObject
 
-   This subtype of :ctype:`PyObject` represents a Python integer object.
+   This subtype of :c:type:`PyObject` represents a Python integer object.
 
 
-.. cvar:: PyTypeObject PyInt_Type
+.. c:var:: PyTypeObject PyInt_Type
 
    .. index:: single: IntType (in modules types)
 
-   This instance of :ctype:`PyTypeObject` represents the Python plain integer type.
+   This instance of :c:type:`PyTypeObject` represents the Python plain integer type.
    This is the same object as ``int`` and ``types.IntType``.
 
 
-.. cfunction:: int PyInt_Check(PyObject *o)
+.. c:function:: int PyInt_Check(PyObject *o)
 
-   Return true if *o* is of type :cdata:`PyInt_Type` or a subtype of
-   :cdata:`PyInt_Type`.
+   Return true if *o* is of type :c:data:`PyInt_Type` or a subtype of
+   :c:data:`PyInt_Type`.
 
    .. versionchanged:: 2.2
       Allowed subtypes to be accepted.
 
 
-.. cfunction:: int PyInt_CheckExact(PyObject *o)
+.. c:function:: int PyInt_CheckExact(PyObject *o)
 
-   Return true if *o* is of type :cdata:`PyInt_Type`, but not a subtype of
-   :cdata:`PyInt_Type`.
+   Return true if *o* is of type :c:data:`PyInt_Type`, but not a subtype of
+   :c:data:`PyInt_Type`.
 
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyObject* PyInt_FromString(char *str, char **pend, int base)
+.. c:function:: PyObject* PyInt_FromString(char *str, char **pend, int base)
 
-   Return a new :ctype:`PyIntObject` or :ctype:`PyLongObject` based on the string
+   Return a new :c:type:`PyIntObject` or :c:type:`PyLongObject` based on the string
    value in *str*, which is interpreted according to the radix in *base*.  If
    *pend* is non-*NULL*, ``*pend`` will point to the first character in *str* which
    follows the representation of the number.  If *base* is ``0``, the radix will be
@@ -49,13 +49,13 @@
    8 will be used; otherwise radix 10 will be used.  If *base* is not ``0``, it
    must be between ``2`` and ``36``, inclusive.  Leading spaces are ignored.  If
    there are no digits, :exc:`ValueError` will be raised.  If the string represents
-   a number too large to be contained within the machine's :ctype:`long int` type
-   and overflow warnings are being suppressed, a :ctype:`PyLongObject` will be
+   a number too large to be contained within the machine's :c:type:`long int` type
+   and overflow warnings are being suppressed, a :c:type:`PyLongObject` will be
    returned.  If overflow warnings are not being suppressed, *NULL* will be
    returned in this case.
 
 
-.. cfunction:: PyObject* PyInt_FromLong(long ival)
+.. c:function:: PyObject* PyInt_FromLong(long ival)
 
    Create a new integer object with a value of *ival*.
 
@@ -66,7 +66,7 @@
    undefined. :-)
 
 
-.. cfunction:: PyObject* PyInt_FromSsize_t(Py_ssize_t ival)
+.. c:function:: PyObject* PyInt_FromSsize_t(Py_ssize_t ival)
 
    Create a new integer object with a value of *ival*. If the value is larger
    than ``LONG_MAX`` or smaller than ``LONG_MIN``, a long integer object is
@@ -75,7 +75,7 @@
    .. versionadded:: 2.5
 
 
-.. cfunction:: PyObject* PyInt_FromSize_t(size_t ival)
+.. c:function:: PyObject* PyInt_FromSize_t(size_t ival)
 
    Create a new integer object with a value of *ival*. If the value exceeds
    ``LONG_MAX``, a long integer object is returned.
@@ -83,47 +83,47 @@
    .. versionadded:: 2.5
 
 
-.. cfunction:: long PyInt_AsLong(PyObject *io)
+.. c:function:: long PyInt_AsLong(PyObject *io)
 
-   Will first attempt to cast the object to a :ctype:`PyIntObject`, if it is not
+   Will first attempt to cast the object to a :c:type:`PyIntObject`, if it is not
    already one, and then return its value. If there is an error, ``-1`` is
    returned, and the caller should check ``PyErr_Occurred()`` to find out whether
    there was an error, or whether the value just happened to be -1.
 
 
-.. cfunction:: long PyInt_AS_LONG(PyObject *io)
+.. c:function:: long PyInt_AS_LONG(PyObject *io)
 
    Return the value of the object *io*.  No error checking is performed.
 
 
-.. cfunction:: unsigned long PyInt_AsUnsignedLongMask(PyObject *io)
+.. c:function:: unsigned long PyInt_AsUnsignedLongMask(PyObject *io)
 
-   Will first attempt to cast the object to a :ctype:`PyIntObject` or
-   :ctype:`PyLongObject`, if it is not already one, and then return its value as
+   Will first attempt to cast the object to a :c:type:`PyIntObject` or
+   :c:type:`PyLongObject`, if it is not already one, and then return its value as
    unsigned long.  This function does not check for overflow.
 
    .. versionadded:: 2.3
 
 
-.. cfunction:: unsigned PY_LONG_LONG PyInt_AsUnsignedLongLongMask(PyObject *io)
+.. c:function:: unsigned PY_LONG_LONG PyInt_AsUnsignedLongLongMask(PyObject *io)
 
-   Will first attempt to cast the object to a :ctype:`PyIntObject` or
-   :ctype:`PyLongObject`, if it is not already one, and then return its value as
+   Will first attempt to cast the object to a :c:type:`PyIntObject` or
+   :c:type:`PyLongObject`, if it is not already one, and then return its value as
    unsigned long long, without checking for overflow.
 
    .. versionadded:: 2.3
 
 
-.. cfunction:: Py_ssize_t PyInt_AsSsize_t(PyObject *io)
+.. c:function:: Py_ssize_t PyInt_AsSsize_t(PyObject *io)
 
-   Will first attempt to cast the object to a :ctype:`PyIntObject` or
-   :ctype:`PyLongObject`, if it is not already one, and then return its value as
-   :ctype:`Py_ssize_t`.
+   Will first attempt to cast the object to a :c:type:`PyIntObject` or
+   :c:type:`PyLongObject`, if it is not already one, and then return its value as
+   :c:type:`Py_ssize_t`.
 
    .. versionadded:: 2.5
 
 
-.. cfunction:: long PyInt_GetMax()
+.. c:function:: long PyInt_GetMax()
 
    .. index:: single: LONG_MAX
 
@@ -131,7 +131,7 @@
    (:const:`LONG_MAX`, as defined in the system header files).
 
 
-.. cfunction:: int PyInt_ClearFreeList()
+.. c:function:: int PyInt_ClearFreeList()
 
    Clear the integer free list. Return the number of items that could not
    be freed.
diff --git a/Doc/c-api/intro.rst b/Doc/c-api/intro.rst
index 94af0f5..4216881 100644
--- a/Doc/c-api/intro.rst
+++ b/Doc/c-api/intro.rst
@@ -88,15 +88,15 @@
 .. index:: object: type
 
 Most Python/C API functions have one or more arguments as well as a return value
-of type :ctype:`PyObject\*`.  This type is a pointer to an opaque data type
+of type :c:type:`PyObject\*`.  This type is a pointer to an opaque data type
 representing an arbitrary Python object.  Since all Python object types are
 treated the same way by the Python language in most situations (e.g.,
 assignments, scope rules, and argument passing), it is only fitting that they
 should be represented by a single C type.  Almost all Python objects live on the
 heap: you never declare an automatic or static variable of type
-:ctype:`PyObject`, only pointer variables of type :ctype:`PyObject\*` can  be
+:c:type:`PyObject`, only pointer variables of type :c:type:`PyObject\*` can  be
 declared.  The sole exception are the type objects; since these must never be
-deallocated, they are typically static :ctype:`PyTypeObject` objects.
+deallocated, they are typically static :c:type:`PyTypeObject` objects.
 
 All Python objects (even Python integers) have a :dfn:`type` and a
 :dfn:`reference count`.  An object's type determines what kind of object it is
@@ -127,8 +127,8 @@
    single: Py_DECREF()
 
 Reference counts are always manipulated explicitly.  The normal way is  to use
-the macro :cfunc:`Py_INCREF` to increment an object's reference count by one,
-and :cfunc:`Py_DECREF` to decrement it by   one.  The :cfunc:`Py_DECREF` macro
+the macro :c:func:`Py_INCREF` to increment an object's reference count by one,
+and :c:func:`Py_DECREF` to decrement it by   one.  The :c:func:`Py_DECREF` macro
 is considerably more complex than the incref one, since it must check whether
 the reference count becomes zero and then cause the object's deallocator to be
 called. The deallocator is a function pointer contained in the object's type
@@ -159,13 +159,13 @@
 conceivably remove the object from the list, decrementing its reference count
 and possible deallocating it. The real danger is that innocent-looking
 operations may invoke arbitrary Python code which could do this; there is a code
-path which allows control to flow back to the user from a :cfunc:`Py_DECREF`, so
+path which allows control to flow back to the user from a :c:func:`Py_DECREF`, so
 almost any operation is potentially dangerous.
 
 A safe approach is to always use the generic operations (functions  whose name
 begins with ``PyObject_``, ``PyNumber_``, ``PySequence_`` or ``PyMapping_``).
 These operations always increment the reference count of the object they return.
-This leaves the caller with the responsibility to call :cfunc:`Py_DECREF` when
+This leaves the caller with the responsibility to call :c:func:`Py_DECREF` when
 they are done with the result; this soon becomes second nature.
 
 
@@ -180,7 +180,7 @@
 reference" means being responsible for calling Py_DECREF on it when the
 reference is no longer needed.  Ownership can also be transferred, meaning that
 the code that receives ownership of the reference then becomes responsible for
-eventually decref'ing it by calling :cfunc:`Py_DECREF` or :cfunc:`Py_XDECREF`
+eventually decref'ing it by calling :c:func:`Py_DECREF` or :c:func:`Py_XDECREF`
 when it's no longer needed---or passing on this responsibility (usually to its
 caller). When a function passes ownership of a reference on to its caller, the
 caller is said to receive a *new* reference.  When no ownership is transferred,
@@ -198,7 +198,7 @@
    single: PyTuple_SetItem()
 
 Few functions steal references; the two notable exceptions are
-:cfunc:`PyList_SetItem` and :cfunc:`PyTuple_SetItem`, which  steal a reference
+:c:func:`PyList_SetItem` and :c:func:`PyTuple_SetItem`, which  steal a reference
 to the item (but not to the tuple or list into which the item is put!).  These
 functions were designed to steal a reference because of a common idiom for
 populating a tuple or list with newly created objects; for example, the code to
@@ -212,21 +212,21 @@
    PyTuple_SetItem(t, 1, PyInt_FromLong(2L));
    PyTuple_SetItem(t, 2, PyString_FromString("three"));
 
-Here, :cfunc:`PyInt_FromLong` returns a new reference which is immediately
-stolen by :cfunc:`PyTuple_SetItem`.  When you want to keep using an object
-although the reference to it will be stolen, use :cfunc:`Py_INCREF` to grab
+Here, :c:func:`PyInt_FromLong` returns a new reference which is immediately
+stolen by :c:func:`PyTuple_SetItem`.  When you want to keep using an object
+although the reference to it will be stolen, use :c:func:`Py_INCREF` to grab
 another reference before calling the reference-stealing function.
 
-Incidentally, :cfunc:`PyTuple_SetItem` is the *only* way to set tuple items;
-:cfunc:`PySequence_SetItem` and :cfunc:`PyObject_SetItem` refuse to do this
+Incidentally, :c:func:`PyTuple_SetItem` is the *only* way to set tuple items;
+:c:func:`PySequence_SetItem` and :c:func:`PyObject_SetItem` refuse to do this
 since tuples are an immutable data type.  You should only use
-:cfunc:`PyTuple_SetItem` for tuples that you are creating yourself.
+:c:func:`PyTuple_SetItem` for tuples that you are creating yourself.
 
-Equivalent code for populating a list can be written using :cfunc:`PyList_New`
-and :cfunc:`PyList_SetItem`.
+Equivalent code for populating a list can be written using :c:func:`PyList_New`
+and :c:func:`PyList_SetItem`.
 
 However, in practice, you will rarely use these ways of creating and populating
-a tuple or list.  There's a generic function, :cfunc:`Py_BuildValue`, that can
+a tuple or list.  There's a generic function, :c:func:`Py_BuildValue`, that can
 create most common objects from C values, directed by a :dfn:`format string`.
 For example, the above two blocks of code could be replaced by the following
 (which also takes care of the error checking)::
@@ -236,7 +236,7 @@
    tuple = Py_BuildValue("(iis)", 1, 2, "three");
    list = Py_BuildValue("[iis]", 1, 2, "three");
 
-It is much more common to use :cfunc:`PyObject_SetItem` and friends with items
+It is much more common to use :c:func:`PyObject_SetItem` and friends with items
 whose references you are only borrowing, like arguments that were passed in to
 the function you are writing.  In that case, their behaviour regarding reference
 counts is much saner, since you don't have to increment a reference count so you
@@ -270,15 +270,15 @@
 you ownership of the reference. The reason is simple: in many cases, the
 returned object is created  on the fly, and the reference you get is the only
 reference to the  object.  Therefore, the generic functions that return object
-references, like :cfunc:`PyObject_GetItem` and  :cfunc:`PySequence_GetItem`,
+references, like :c:func:`PyObject_GetItem` and  :c:func:`PySequence_GetItem`,
 always return a new reference (the caller becomes the owner of the reference).
 
 It is important to realize that whether you own a reference returned  by a
 function depends on which function you call only --- *the plumage* (the type of
 the object passed as an argument to the function) *doesn't enter into it!*
-Thus, if you  extract an item from a list using :cfunc:`PyList_GetItem`, you
+Thus, if you  extract an item from a list using :c:func:`PyList_GetItem`, you
 don't own the reference --- but if you obtain the same item from the same list
-using :cfunc:`PySequence_GetItem` (which happens to take exactly the same
+using :c:func:`PySequence_GetItem` (which happens to take exactly the same
 arguments), you do own a reference to the returned object.
 
 .. index::
@@ -286,8 +286,8 @@
    single: PySequence_GetItem()
 
 Here is an example of how you could write a function that computes the sum of
-the items in a list of integers; once using  :cfunc:`PyList_GetItem`, and once
-using :cfunc:`PySequence_GetItem`. ::
+the items in a list of integers; once using  :c:func:`PyList_GetItem`, and once
+using :c:func:`PySequence_GetItem`. ::
 
    long
    sum_list(PyObject *list)
@@ -340,8 +340,8 @@
 -----
 
 There are few other data types that play a significant role in  the Python/C
-API; most are simple C types such as :ctype:`int`,  :ctype:`long`,
-:ctype:`double` and :ctype:`char\*`.  A few structure types  are used to
+API; most are simple C types such as :c:type:`int`,  :c:type:`long`,
+:c:type:`double` and :c:type:`char\*`.  A few structure types  are used to
 describe static tables used to list the functions exported  by a module or the
 data attributes of a new object type, and another is used to describe the value
 of a complex number.  These will  be discussed together with the functions that
@@ -370,7 +370,7 @@
 A few functions return a Boolean true/false result, with false indicating an
 error.  Very few functions return no explicit error indicator or have an
 ambiguous return value, and require explicit testing for errors with
-:cfunc:`PyErr_Occurred`.  These exceptions are always explicitly documented.
+:c:func:`PyErr_Occurred`.  These exceptions are always explicitly documented.
 
 .. index::
    single: PyErr_SetString()
@@ -379,11 +379,11 @@
 Exception state is maintained in per-thread storage (this is  equivalent to
 using global storage in an unthreaded application).  A  thread can be in one of
 two states: an exception has occurred, or not. The function
-:cfunc:`PyErr_Occurred` can be used to check for this: it returns a borrowed
+:c:func:`PyErr_Occurred` can be used to check for this: it returns a borrowed
 reference to the exception type object when an exception has occurred, and
 *NULL* otherwise.  There are a number of functions to set the exception state:
-:cfunc:`PyErr_SetString` is the most common (though not the most general)
-function to set the exception state, and :cfunc:`PyErr_Clear` clears the
+:c:func:`PyErr_SetString` is the most common (though not the most general)
+function to set the exception state, and :c:func:`PyErr_Clear` clears the
 exception state.
 
 .. index::
@@ -424,7 +424,7 @@
 .. index:: single: sum_sequence()
 
 A simple example of detecting exceptions and passing them on is shown in the
-:cfunc:`sum_sequence` example above.  It so happens that that example doesn't
+:c:func:`sum_sequence` example above.  It so happens that that example doesn't
 need to clean up any owned references when it detects an error.  The following
 example function shows some error cleanup.  First, to remind you why you like
 Python, we show the equivalent Python code::
@@ -491,10 +491,10 @@
    single: Py_XDECREF()
 
 This example represents an endorsed use of the ``goto`` statement  in C!
-It illustrates the use of :cfunc:`PyErr_ExceptionMatches` and
-:cfunc:`PyErr_Clear` to handle specific exceptions, and the use of
-:cfunc:`Py_XDECREF` to dispose of owned references that may be *NULL* (note the
-``'X'`` in the name; :cfunc:`Py_DECREF` would crash when confronted with a
+It illustrates the use of :c:func:`PyErr_ExceptionMatches` and
+:c:func:`PyErr_Clear` to handle specific exceptions, and the use of
+:c:func:`Py_XDECREF` to dispose of owned references that may be *NULL* (note the
+``'X'`` in the name; :c:func:`Py_DECREF` would crash when confronted with a
 *NULL* reference).  It is important that the variables used to hold owned
 references are initialized to *NULL* for this to work; likewise, the proposed
 return value is initialized to ``-1`` (failure) and only set to success after
@@ -520,20 +520,20 @@
    triple: module; search; path
    single: path (in module sys)
 
-The basic initialization function is :cfunc:`Py_Initialize`. This initializes
+The basic initialization function is :c:func:`Py_Initialize`. This initializes
 the table of loaded modules, and creates the fundamental modules
 :mod:`__builtin__`, :mod:`__main__`, :mod:`sys`, and :mod:`exceptions`.  It also
 initializes the module search path (``sys.path``).
 
 .. index:: single: PySys_SetArgvEx()
 
-:cfunc:`Py_Initialize` does not set the "script argument list"  (``sys.argv``).
+:c:func:`Py_Initialize` does not set the "script argument list"  (``sys.argv``).
 If this variable is needed by Python code that will be executed later, it must
 be set explicitly with a call to  ``PySys_SetArgvEx(argc, argv, updatepath)``
-after the call to :cfunc:`Py_Initialize`.
+after the call to :c:func:`Py_Initialize`.
 
 On most systems (in particular, on Unix and Windows, although the details are
-slightly different), :cfunc:`Py_Initialize` calculates the module search path
+slightly different), :c:func:`Py_Initialize` calculates the module search path
 based upon its best guess for the location of the standard Python interpreter
 executable, assuming that the Python library is found in a fixed location
 relative to the Python interpreter executable.  In particular, it looks for a
@@ -557,22 +557,22 @@
    single: Py_GetProgramFullPath()
 
 The embedding application can steer the search by calling
-``Py_SetProgramName(file)`` *before* calling  :cfunc:`Py_Initialize`.  Note that
+``Py_SetProgramName(file)`` *before* calling  :c:func:`Py_Initialize`.  Note that
 :envvar:`PYTHONHOME` still overrides this and :envvar:`PYTHONPATH` is still
 inserted in front of the standard path.  An application that requires total
-control has to provide its own implementation of :cfunc:`Py_GetPath`,
-:cfunc:`Py_GetPrefix`, :cfunc:`Py_GetExecPrefix`, and
-:cfunc:`Py_GetProgramFullPath` (all defined in :file:`Modules/getpath.c`).
+control has to provide its own implementation of :c:func:`Py_GetPath`,
+:c:func:`Py_GetPrefix`, :c:func:`Py_GetExecPrefix`, and
+:c:func:`Py_GetProgramFullPath` (all defined in :file:`Modules/getpath.c`).
 
 .. index:: single: Py_IsInitialized()
 
 Sometimes, it is desirable to "uninitialize" Python.  For instance,  the
 application may want to start over (make another call to
-:cfunc:`Py_Initialize`) or the application is simply done with its  use of
+:c:func:`Py_Initialize`) or the application is simply done with its  use of
 Python and wants to free memory allocated by Python.  This can be accomplished
-by calling :cfunc:`Py_Finalize`.  The function :cfunc:`Py_IsInitialized` returns
+by calling :c:func:`Py_Finalize`.  The function :c:func:`Py_IsInitialized` returns
 true if Python is currently in the initialized state.  More information about
-these functions is given in a later chapter. Notice that :cfunc:`Py_Finalize`
+these functions is given in a later chapter. Notice that :c:func:`Py_Finalize`
 does *not* free all memory allocated by the Python interpreter, e.g. memory
 allocated by extension modules currently cannot be released.
 
@@ -592,11 +592,11 @@
 allocator, or low-level profiling of the main interpreter loop.  Only the most
 frequently-used builds will be described in the remainder of this section.
 
-Compiling the interpreter with the :cmacro:`Py_DEBUG` macro defined produces
-what is generally meant by "a debug build" of Python. :cmacro:`Py_DEBUG` is
+Compiling the interpreter with the :c:macro:`Py_DEBUG` macro defined produces
+what is generally meant by "a debug build" of Python. :c:macro:`Py_DEBUG` is
 enabled in the Unix build by adding ``--with-pydebug`` to the
 :file:`./configure` command.  It is also implied by the presence of the
-not-Python-specific :cmacro:`_DEBUG` macro.  When :cmacro:`Py_DEBUG` is enabled
+not-Python-specific :c:macro:`_DEBUG` macro.  When :c:macro:`Py_DEBUG` is enabled
 in the Unix build, compiler optimization is disabled.
 
 In addition to the reference count debugging described below, the following
@@ -625,11 +625,11 @@
 
 There may be additional checks not mentioned here.
 
-Defining :cmacro:`Py_TRACE_REFS` enables reference tracing.  When defined, a
+Defining :c:macro:`Py_TRACE_REFS` enables reference tracing.  When defined, a
 circular doubly linked list of active objects is maintained by adding two extra
-fields to every :ctype:`PyObject`.  Total allocations are tracked as well.  Upon
+fields to every :c:type:`PyObject`.  Total allocations are tracked as well.  Upon
 exit, all existing references are printed.  (In interactive mode this happens
-after every statement run by the interpreter.)  Implied by :cmacro:`Py_DEBUG`.
+after every statement run by the interpreter.)  Implied by :c:macro:`Py_DEBUG`.
 
 Please refer to :file:`Misc/SpecialBuilds.txt` in the Python source distribution
 for more detailed information.
diff --git a/Doc/c-api/iter.rst b/Doc/c-api/iter.rst
index 560cd93..88ac0c1 100644
--- a/Doc/c-api/iter.rst
+++ b/Doc/c-api/iter.rst
@@ -10,12 +10,12 @@
 There are only a couple of functions specifically for working with iterators.
 
 
-.. cfunction:: int PyIter_Check(PyObject *o)
+.. c:function:: int PyIter_Check(PyObject *o)
 
    Return true if the object *o* supports the iterator protocol.
 
 
-.. cfunction:: PyObject* PyIter_Next(PyObject *o)
+.. c:function:: PyObject* PyIter_Next(PyObject *o)
 
    Return the next value from the iteration *o*.  If the object is an iterator,
    this retrieves the next value from the iteration, and returns *NULL* with no
diff --git a/Doc/c-api/iterator.rst b/Doc/c-api/iterator.rst
index cd2fa33..3931bb9 100644
--- a/Doc/c-api/iterator.rst
+++ b/Doc/c-api/iterator.rst
@@ -12,23 +12,23 @@
 sentinel value is returned.
 
 
-.. cvar:: PyTypeObject PySeqIter_Type
+.. c:var:: PyTypeObject PySeqIter_Type
 
-   Type object for iterator objects returned by :cfunc:`PySeqIter_New` and the
+   Type object for iterator objects returned by :c:func:`PySeqIter_New` and the
    one-argument form of the :func:`iter` built-in function for built-in sequence
    types.
 
    .. versionadded:: 2.2
 
 
-.. cfunction:: int PySeqIter_Check(op)
+.. c:function:: int PySeqIter_Check(op)
 
-   Return true if the type of *op* is :cdata:`PySeqIter_Type`.
+   Return true if the type of *op* is :c:data:`PySeqIter_Type`.
 
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyObject* PySeqIter_New(PyObject *seq)
+.. c:function:: PyObject* PySeqIter_New(PyObject *seq)
 
    Return an iterator that works with a general sequence object, *seq*.  The
    iteration ends when the sequence raises :exc:`IndexError` for the subscripting
@@ -37,22 +37,22 @@
    .. versionadded:: 2.2
 
 
-.. cvar:: PyTypeObject PyCallIter_Type
+.. c:var:: PyTypeObject PyCallIter_Type
 
-   Type object for iterator objects returned by :cfunc:`PyCallIter_New` and the
+   Type object for iterator objects returned by :c:func:`PyCallIter_New` and the
    two-argument form of the :func:`iter` built-in function.
 
    .. versionadded:: 2.2
 
 
-.. cfunction:: int PyCallIter_Check(op)
+.. c:function:: int PyCallIter_Check(op)
 
-   Return true if the type of *op* is :cdata:`PyCallIter_Type`.
+   Return true if the type of *op* is :c:data:`PyCallIter_Type`.
 
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyObject* PyCallIter_New(PyObject *callable, PyObject *sentinel)
+.. c:function:: PyObject* PyCallIter_New(PyObject *callable, PyObject *sentinel)
 
    Return a new iterator.  The first parameter, *callable*, can be any Python
    callable object that can be called with no parameters; each call to it should
diff --git a/Doc/c-api/list.rst b/Doc/c-api/list.rst
index d24aa72..0aed0f3 100644
--- a/Doc/c-api/list.rst
+++ b/Doc/c-api/list.rst
@@ -8,18 +8,18 @@
 .. index:: object: list
 
 
-.. ctype:: PyListObject
+.. c:type:: PyListObject
 
-   This subtype of :ctype:`PyObject` represents a Python list object.
+   This subtype of :c:type:`PyObject` represents a Python list object.
 
 
-.. cvar:: PyTypeObject PyList_Type
+.. c:var:: PyTypeObject PyList_Type
 
-   This instance of :ctype:`PyTypeObject` represents the Python list type.  This
+   This instance of :c:type:`PyTypeObject` represents the Python list type.  This
    is the same object as ``list`` in the Python layer.
 
 
-.. cfunction:: int PyList_Check(PyObject *p)
+.. c:function:: int PyList_Check(PyObject *p)
 
    Return true if *p* is a list object or an instance of a subtype of the list
    type.
@@ -28,7 +28,7 @@
       Allowed subtypes to be accepted.
 
 
-.. cfunction:: int PyList_CheckExact(PyObject *p)
+.. c:function:: int PyList_CheckExact(PyObject *p)
 
    Return true if *p* is a list object, but not an instance of a subtype of
    the list type.
@@ -36,7 +36,7 @@
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyObject* PyList_New(Py_ssize_t len)
+.. c:function:: PyObject* PyList_New(Py_ssize_t len)
 
    Return a new list of length *len* on success, or *NULL* on failure.
 
@@ -44,15 +44,15 @@
 
       If *len* is greater than zero, the returned list object's items are
       set to ``NULL``.  Thus you cannot use abstract API functions such as
-      :cfunc:`PySequence_SetItem`  or expose the object to Python code before
-      setting all items to a real object with :cfunc:`PyList_SetItem`.
+      :c:func:`PySequence_SetItem`  or expose the object to Python code before
+      setting all items to a real object with :c:func:`PyList_SetItem`.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` for *size*. This might require
+      This function used an :c:type:`int` for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: Py_ssize_t PyList_Size(PyObject *list)
+.. c:function:: Py_ssize_t PyList_Size(PyObject *list)
 
    .. index:: builtin: len
 
@@ -60,20 +60,20 @@
    ``len(list)`` on a list object.
 
    .. versionchanged:: 2.5
-      This function returned an :ctype:`int`. This might require changes in
+      This function returned an :c:type:`int`. This might require changes in
       your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: Py_ssize_t PyList_GET_SIZE(PyObject *list)
+.. c:function:: Py_ssize_t PyList_GET_SIZE(PyObject *list)
 
-   Macro form of :cfunc:`PyList_Size` without error checking.
+   Macro form of :c:func:`PyList_Size` without error checking.
 
    .. versionchanged:: 2.5
-      This macro returned an :ctype:`int`. This might require changes in your
+      This macro returned an :c:type:`int`. This might require changes in your
       code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyList_GetItem(PyObject *list, Py_ssize_t index)
+.. c:function:: PyObject* PyList_GetItem(PyObject *list, Py_ssize_t index)
 
    Return the object at position *index* in the list pointed to by *list*.  The
    position must be positive, indexing from the end of the list is not
@@ -81,20 +81,20 @@
    :exc:`IndexError` exception.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` for *index*. This might require
+      This function used an :c:type:`int` for *index*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyList_GET_ITEM(PyObject *list, Py_ssize_t i)
+.. c:function:: PyObject* PyList_GET_ITEM(PyObject *list, Py_ssize_t i)
 
-   Macro form of :cfunc:`PyList_GetItem` without error checking.
+   Macro form of :c:func:`PyList_GetItem` without error checking.
 
    .. versionchanged:: 2.5
-      This macro used an :ctype:`int` for *i*. This might require changes in
+      This macro used an :c:type:`int` for *i*. This might require changes in
       your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: int PyList_SetItem(PyObject *list, Py_ssize_t index, PyObject *item)
+.. c:function:: int PyList_SetItem(PyObject *list, Py_ssize_t index, PyObject *item)
 
    Set the item at index *index* in list to *item*.  Return ``0`` on success
    or ``-1`` on failure.
@@ -105,46 +105,46 @@
       an item already in the list at the affected position.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` for *index*. This might require
+      This function used an :c:type:`int` for *index*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: void PyList_SET_ITEM(PyObject *list, Py_ssize_t i, PyObject *o)
+.. c:function:: void PyList_SET_ITEM(PyObject *list, Py_ssize_t i, PyObject *o)
 
-   Macro form of :cfunc:`PyList_SetItem` without error checking. This is
+   Macro form of :c:func:`PyList_SetItem` without error checking. This is
    normally only used to fill in new lists where there is no previous content.
 
    .. note::
 
       This macro "steals" a reference to *item*, and, unlike
-      :cfunc:`PyList_SetItem`, does *not* discard a reference to any item that
+      :c:func:`PyList_SetItem`, does *not* discard a reference to any item that
       it being replaced; any reference in *list* at position *i* will be
       leaked.
 
    .. versionchanged:: 2.5
-      This macro used an :ctype:`int` for *i*. This might require
+      This macro used an :c:type:`int` for *i*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: int PyList_Insert(PyObject *list, Py_ssize_t index, PyObject *item)
+.. c:function:: int PyList_Insert(PyObject *list, Py_ssize_t index, PyObject *item)
 
    Insert the item *item* into list *list* in front of index *index*.  Return
    ``0`` if successful; return ``-1`` and set an exception if unsuccessful.
    Analogous to ``list.insert(index, item)``.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` for *index*. This might require
+      This function used an :c:type:`int` for *index*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: int PyList_Append(PyObject *list, PyObject *item)
+.. c:function:: int PyList_Append(PyObject *list, PyObject *item)
 
    Append the object *item* at the end of list *list*. Return ``0`` if
    successful; return ``-1`` and set an exception if unsuccessful.  Analogous
    to ``list.append(item)``.
 
 
-.. cfunction:: PyObject* PyList_GetSlice(PyObject *list, Py_ssize_t low, Py_ssize_t high)
+.. c:function:: PyObject* PyList_GetSlice(PyObject *list, Py_ssize_t low, Py_ssize_t high)
 
    Return a list of the objects in *list* containing the objects *between* *low*
    and *high*.  Return *NULL* and set an exception if unsuccessful.  Analogous
@@ -152,11 +152,11 @@
    supported.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` for *low* and *high*. This might
+      This function used an :c:type:`int` for *low* and *high*. This might
       require changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: int PyList_SetSlice(PyObject *list, Py_ssize_t low, Py_ssize_t high, PyObject *itemlist)
+.. c:function:: int PyList_SetSlice(PyObject *list, Py_ssize_t low, Py_ssize_t high, PyObject *itemlist)
 
    Set the slice of *list* between *low* and *high* to the contents of
    *itemlist*.  Analogous to ``list[low:high] = itemlist``. The *itemlist* may
@@ -165,23 +165,23 @@
    slicing from Python, are not supported.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` for *low* and *high*. This might
+      This function used an :c:type:`int` for *low* and *high*. This might
       require changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: int PyList_Sort(PyObject *list)
+.. c:function:: int PyList_Sort(PyObject *list)
 
    Sort the items of *list* in place.  Return ``0`` on success, ``-1`` on
    failure.  This is equivalent to ``list.sort()``.
 
 
-.. cfunction:: int PyList_Reverse(PyObject *list)
+.. c:function:: int PyList_Reverse(PyObject *list)
 
    Reverse the items of *list* in place.  Return ``0`` on success, ``-1`` on
    failure.  This is the equivalent of ``list.reverse()``.
 
 
-.. cfunction:: PyObject* PyList_AsTuple(PyObject *list)
+.. c:function:: PyObject* PyList_AsTuple(PyObject *list)
 
    .. index:: builtin: tuple
 
diff --git a/Doc/c-api/long.rst b/Doc/c-api/long.rst
index 11d2908..5a8e51d 100644
--- a/Doc/c-api/long.rst
+++ b/Doc/c-api/long.rst
@@ -8,100 +8,100 @@
 .. index:: object: long integer
 
 
-.. ctype:: PyLongObject
+.. c:type:: PyLongObject
 
-   This subtype of :ctype:`PyObject` represents a Python long integer object.
+   This subtype of :c:type:`PyObject` represents a Python long integer object.
 
 
-.. cvar:: PyTypeObject PyLong_Type
+.. c:var:: PyTypeObject PyLong_Type
 
    .. index:: single: LongType (in modules types)
 
-   This instance of :ctype:`PyTypeObject` represents the Python long integer type.
+   This instance of :c:type:`PyTypeObject` represents the Python long integer type.
    This is the same object as ``long`` and ``types.LongType``.
 
 
-.. cfunction:: int PyLong_Check(PyObject *p)
+.. c:function:: int PyLong_Check(PyObject *p)
 
-   Return true if its argument is a :ctype:`PyLongObject` or a subtype of
-   :ctype:`PyLongObject`.
+   Return true if its argument is a :c:type:`PyLongObject` or a subtype of
+   :c:type:`PyLongObject`.
 
    .. versionchanged:: 2.2
       Allowed subtypes to be accepted.
 
 
-.. cfunction:: int PyLong_CheckExact(PyObject *p)
+.. c:function:: int PyLong_CheckExact(PyObject *p)
 
-   Return true if its argument is a :ctype:`PyLongObject`, but not a subtype of
-   :ctype:`PyLongObject`.
+   Return true if its argument is a :c:type:`PyLongObject`, but not a subtype of
+   :c:type:`PyLongObject`.
 
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyObject* PyLong_FromLong(long v)
+.. c:function:: PyObject* PyLong_FromLong(long v)
 
-   Return a new :ctype:`PyLongObject` object from *v*, or *NULL* on failure.
+   Return a new :c:type:`PyLongObject` object from *v*, or *NULL* on failure.
 
 
-.. cfunction:: PyObject* PyLong_FromUnsignedLong(unsigned long v)
+.. c:function:: PyObject* PyLong_FromUnsignedLong(unsigned long v)
 
-   Return a new :ctype:`PyLongObject` object from a C :ctype:`unsigned long`, or
+   Return a new :c:type:`PyLongObject` object from a C :c:type:`unsigned long`, or
    *NULL* on failure.
 
 
-.. cfunction:: PyObject* PyLong_FromSsize_t(Py_ssize_t v)
+.. c:function:: PyObject* PyLong_FromSsize_t(Py_ssize_t v)
 
-   Return a new :ctype:`PyLongObject` object from a C :ctype:`Py_ssize_t`, or
+   Return a new :c:type:`PyLongObject` object from a C :c:type:`Py_ssize_t`, or
    *NULL* on failure.
 
    .. versionadded:: 2.6
 
 
-.. cfunction:: PyObject* PyLong_FromSize_t(size_t v)
+.. c:function:: PyObject* PyLong_FromSize_t(size_t v)
 
-   Return a new :ctype:`PyLongObject` object from a C :ctype:`size_t`, or
+   Return a new :c:type:`PyLongObject` object from a C :c:type:`size_t`, or
    *NULL* on failure.
 
    .. versionadded:: 2.6
 
 
-.. cfunction:: PyObject* PyLong_FromSsize_t(Py_ssize_t v)
+.. c:function:: PyObject* PyLong_FromSsize_t(Py_ssize_t v)
 
-   Return a new :ctype:`PyLongObject` object with a value of *v*, or *NULL*
+   Return a new :c:type:`PyLongObject` object with a value of *v*, or *NULL*
    on failure.
 
    .. versionadded:: 2.6
 
 
-.. cfunction:: PyObject* PyLong_FromSize_t(size_t v)
+.. c:function:: PyObject* PyLong_FromSize_t(size_t v)
 
-   Return a new :ctype:`PyLongObject` object with a value of *v*, or *NULL*
+   Return a new :c:type:`PyLongObject` object with a value of *v*, or *NULL*
    on failure.
 
    .. versionadded:: 2.6
 
 
-.. cfunction:: PyObject* PyLong_FromLongLong(PY_LONG_LONG v)
+.. c:function:: PyObject* PyLong_FromLongLong(PY_LONG_LONG v)
 
-   Return a new :ctype:`PyLongObject` object from a C :ctype:`long long`, or *NULL*
+   Return a new :c:type:`PyLongObject` object from a C :c:type:`long long`, or *NULL*
    on failure.
 
 
-.. cfunction:: PyObject* PyLong_FromUnsignedLongLong(unsigned PY_LONG_LONG v)
+.. c:function:: PyObject* PyLong_FromUnsignedLongLong(unsigned PY_LONG_LONG v)
 
-   Return a new :ctype:`PyLongObject` object from a C :ctype:`unsigned long long`,
+   Return a new :c:type:`PyLongObject` object from a C :c:type:`unsigned long long`,
    or *NULL* on failure.
 
 
-.. cfunction:: PyObject* PyLong_FromDouble(double v)
+.. c:function:: PyObject* PyLong_FromDouble(double v)
 
-   Return a new :ctype:`PyLongObject` object from the integer part of *v*, or
+   Return a new :c:type:`PyLongObject` object from the integer part of *v*, or
    *NULL* on failure.
 
 
-.. cfunction:: PyObject* PyLong_FromString(char *str, char **pend, int base)
+.. c:function:: PyObject* PyLong_FromString(char *str, char **pend, int base)
 
-   Return a new :ctype:`PyLongObject` based on the string value in *str*, which is
+   Return a new :c:type:`PyLongObject` based on the string value in *str*, which is
    interpreted according to the radix in *base*.  If *pend* is non-*NULL*,
    *\*pend* will point to the first character in *str* which follows the
    representation of the number.  If *base* is ``0``, the radix will be determined
@@ -112,7 +112,7 @@
    no digits, :exc:`ValueError` will be raised.
 
 
-.. cfunction:: PyObject* PyLong_FromUnicode(Py_UNICODE *u, Py_ssize_t length, int base)
+.. c:function:: PyObject* PyLong_FromUnicode(Py_UNICODE *u, Py_ssize_t length, int base)
 
    Convert a sequence of Unicode digits to a Python long integer value.  The first
    parameter, *u*, points to the first character of the Unicode string, *length*
@@ -123,14 +123,14 @@
    .. versionadded:: 1.6
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` for *length*. This might require
+      This function used an :c:type:`int` for *length*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyLong_FromVoidPtr(void *p)
+.. c:function:: PyObject* PyLong_FromVoidPtr(void *p)
 
    Create a Python integer or long integer from the pointer *p*. The pointer value
-   can be retrieved from the resulting value using :cfunc:`PyLong_AsVoidPtr`.
+   can be retrieved from the resulting value using :c:func:`PyLong_AsVoidPtr`.
 
    .. versionadded:: 1.5.2
 
@@ -138,20 +138,20 @@
       If the integer is larger than LONG_MAX, a positive long integer is returned.
 
 
-.. cfunction:: long PyLong_AsLong(PyObject *pylong)
+.. c:function:: long PyLong_AsLong(PyObject *pylong)
 
    .. index::
       single: LONG_MAX
       single: OverflowError (built-in exception)
 
-   Return a C :ctype:`long` representation of the contents of *pylong*.  If
+   Return a C :c:type:`long` representation of the contents of *pylong*.  If
    *pylong* is greater than :const:`LONG_MAX`, an :exc:`OverflowError` is raised
    and ``-1`` will be returned.
 
 
-.. cfunction:: long PyLong_AsLongAndOverflow(PyObject *pylong, int *overflow)
+.. c:function:: long PyLong_AsLongAndOverflow(PyObject *pylong, int *overflow)
 
-   Return a C :ctype:`long` representation of the contents of
+   Return a C :c:type:`long` representation of the contents of
    *pylong*.  If *pylong* is greater than :const:`LONG_MAX` or less
    than :const:`LONG_MIN`, set *\*overflow* to ``1`` or ``-1``,
    respectively, and return ``-1``; otherwise, set *\*overflow* to
@@ -162,9 +162,9 @@
    .. versionadded:: 2.7
 
 
-.. cfunction:: PY_LONG_LONG PyLong_AsLongLongAndOverflow(PyObject *pylong, int *overflow)
+.. c:function:: PY_LONG_LONG PyLong_AsLongLongAndOverflow(PyObject *pylong, int *overflow)
 
-   Return a C :ctype:`long long` representation of the contents of
+   Return a C :c:type:`long long` representation of the contents of
    *pylong*.  If *pylong* is greater than :const:`PY_LLONG_MAX` or less
    than :const:`PY_LLONG_MIN`, set *\*overflow* to ``1`` or ``-1``,
    respectively, and return ``-1``; otherwise, set *\*overflow* to
@@ -175,61 +175,61 @@
    .. versionadded:: 2.7
 
 
-.. cfunction:: Py_ssize_t PyLong_AsSsize_t(PyObject *pylong)
+.. c:function:: Py_ssize_t PyLong_AsSsize_t(PyObject *pylong)
 
    .. index::
       single: PY_SSIZE_T_MAX
       single: OverflowError (built-in exception)
 
-   Return a C :ctype:`Py_ssize_t` representation of the contents of *pylong*.  If
+   Return a C :c:type:`Py_ssize_t` representation of the contents of *pylong*.  If
    *pylong* is greater than :const:`PY_SSIZE_T_MAX`, an :exc:`OverflowError` is raised
    and ``-1`` will be returned.
 
    .. versionadded:: 2.6
 
 
-.. cfunction:: unsigned long PyLong_AsUnsignedLong(PyObject *pylong)
+.. c:function:: unsigned long PyLong_AsUnsignedLong(PyObject *pylong)
 
    .. index::
       single: ULONG_MAX
       single: OverflowError (built-in exception)
 
-   Return a C :ctype:`unsigned long` representation of the contents of *pylong*.
+   Return a C :c:type:`unsigned long` representation of the contents of *pylong*.
    If *pylong* is greater than :const:`ULONG_MAX`, an :exc:`OverflowError` is
    raised.
 
 
-.. cfunction:: Py_ssize_t PyLong_AsSsize_t(PyObject *pylong)
+.. c:function:: Py_ssize_t PyLong_AsSsize_t(PyObject *pylong)
 
    .. index::
       single: PY_SSIZE_T_MAX
 
-   Return a :ctype:`Py_ssize_t` representation of the contents of *pylong*.  If
+   Return a :c:type:`Py_ssize_t` representation of the contents of *pylong*.  If
    *pylong* is greater than :const:`PY_SSIZE_T_MAX`, an :exc:`OverflowError` is
    raised.
 
    .. versionadded:: 2.6
 
 
-.. cfunction:: PY_LONG_LONG PyLong_AsLongLong(PyObject *pylong)
+.. c:function:: PY_LONG_LONG PyLong_AsLongLong(PyObject *pylong)
 
    .. index::
       single: OverflowError (built-in exception)
 
-   Return a C :ctype:`long long` from a Python long integer.  If
-   *pylong* cannot be represented as a :ctype:`long long`, an
+   Return a C :c:type:`long long` from a Python long integer.  If
+   *pylong* cannot be represented as a :c:type:`long long`, an
    :exc:`OverflowError` is raised and ``-1`` is returned.
 
    .. versionadded:: 2.2
 
 
-.. cfunction:: unsigned PY_LONG_LONG PyLong_AsUnsignedLongLong(PyObject *pylong)
+.. c:function:: unsigned PY_LONG_LONG PyLong_AsUnsignedLongLong(PyObject *pylong)
 
    .. index::
       single: OverflowError (built-in exception)
 
-   Return a C :ctype:`unsigned long long` from a Python long integer. If
-   *pylong* cannot be represented as an :ctype:`unsigned long long`, an
+   Return a C :c:type:`unsigned long long` from a Python long integer. If
+   *pylong* cannot be represented as an :c:type:`unsigned long long`, an
    :exc:`OverflowError` is raised and ``(unsigned long long)-1`` is
    returned.
 
@@ -240,35 +240,35 @@
       :exc:`TypeError`.
 
 
-.. cfunction:: unsigned long PyLong_AsUnsignedLongMask(PyObject *io)
+.. c:function:: unsigned long PyLong_AsUnsignedLongMask(PyObject *io)
 
-   Return a C :ctype:`unsigned long` from a Python long integer, without checking
+   Return a C :c:type:`unsigned long` from a Python long integer, without checking
    for overflow.
 
    .. versionadded:: 2.3
 
 
-.. cfunction:: unsigned PY_LONG_LONG PyLong_AsUnsignedLongLongMask(PyObject *io)
+.. c:function:: unsigned PY_LONG_LONG PyLong_AsUnsignedLongLongMask(PyObject *io)
 
-   Return a C :ctype:`unsigned long long` from a Python long integer, without
+   Return a C :c:type:`unsigned long long` from a Python long integer, without
    checking for overflow.
 
    .. versionadded:: 2.3
 
 
-.. cfunction:: double PyLong_AsDouble(PyObject *pylong)
+.. c:function:: double PyLong_AsDouble(PyObject *pylong)
 
-   Return a C :ctype:`double` representation of the contents of *pylong*.  If
-   *pylong* cannot be approximately represented as a :ctype:`double`, an
+   Return a C :c:type:`double` representation of the contents of *pylong*.  If
+   *pylong* cannot be approximately represented as a :c:type:`double`, an
    :exc:`OverflowError` exception is raised and ``-1.0`` will be returned.
 
 
-.. cfunction:: void* PyLong_AsVoidPtr(PyObject *pylong)
+.. c:function:: void* PyLong_AsVoidPtr(PyObject *pylong)
 
-   Convert a Python integer or long integer *pylong* to a C :ctype:`void` pointer.
+   Convert a Python integer or long integer *pylong* to a C :c:type:`void` pointer.
    If *pylong* cannot be converted, an :exc:`OverflowError` will be raised.  This
-   is only assured to produce a usable :ctype:`void` pointer for values created
-   with :cfunc:`PyLong_FromVoidPtr`.
+   is only assured to produce a usable :c:type:`void` pointer for values created
+   with :c:func:`PyLong_FromVoidPtr`.
 
    .. versionadded:: 1.5.2
 
diff --git a/Doc/c-api/mapping.rst b/Doc/c-api/mapping.rst
index 78787e3..7a83a50 100644
--- a/Doc/c-api/mapping.rst
+++ b/Doc/c-api/mapping.rst
@@ -6,13 +6,13 @@
 ================
 
 
-.. cfunction:: int PyMapping_Check(PyObject *o)
+.. c:function:: int PyMapping_Check(PyObject *o)
 
    Return ``1`` if the object provides mapping protocol, and ``0`` otherwise.  This
    function always succeeds.
 
 
-.. cfunction:: Py_ssize_t PyMapping_Size(PyObject *o)
+.. c:function:: Py_ssize_t PyMapping_Size(PyObject *o)
                Py_ssize_t PyMapping_Length(PyObject *o)
 
    .. index:: builtin: len
@@ -22,62 +22,62 @@
    expression ``len(o)``.
 
    .. versionchanged:: 2.5
-      These functions returned an :ctype:`int` type. This might require
+      These functions returned an :c:type:`int` type. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: int PyMapping_DelItemString(PyObject *o, char *key)
+.. c:function:: int PyMapping_DelItemString(PyObject *o, char *key)
 
    Remove the mapping for object *key* from the object *o*. Return ``-1`` on
    failure.  This is equivalent to the Python statement ``del o[key]``.
 
 
-.. cfunction:: int PyMapping_DelItem(PyObject *o, PyObject *key)
+.. c:function:: int PyMapping_DelItem(PyObject *o, PyObject *key)
 
    Remove the mapping for object *key* from the object *o*. Return ``-1`` on
    failure.  This is equivalent to the Python statement ``del o[key]``.
 
 
-.. cfunction:: int PyMapping_HasKeyString(PyObject *o, char *key)
+.. c:function:: int PyMapping_HasKeyString(PyObject *o, char *key)
 
    On success, return ``1`` if the mapping object has the key *key* and ``0``
    otherwise.  This is equivalent to ``o[key]``, returning ``True`` on success
    and ``False`` on an exception.  This function always succeeds.
 
 
-.. cfunction:: int PyMapping_HasKey(PyObject *o, PyObject *key)
+.. c:function:: int PyMapping_HasKey(PyObject *o, PyObject *key)
 
    Return ``1`` if the mapping object has the key *key* and ``0`` otherwise.
    This is equivalent to ``o[key]``, returning ``True`` on success and ``False``
    on an exception.  This function always succeeds.
 
 
-.. cfunction:: PyObject* PyMapping_Keys(PyObject *o)
+.. c:function:: PyObject* PyMapping_Keys(PyObject *o)
 
    On success, return a list of the keys in object *o*.  On failure, return *NULL*.
    This is equivalent to the Python expression ``o.keys()``.
 
 
-.. cfunction:: PyObject* PyMapping_Values(PyObject *o)
+.. c:function:: PyObject* PyMapping_Values(PyObject *o)
 
    On success, return a list of the values in object *o*.  On failure, return
    *NULL*. This is equivalent to the Python expression ``o.values()``.
 
 
-.. cfunction:: PyObject* PyMapping_Items(PyObject *o)
+.. c:function:: PyObject* PyMapping_Items(PyObject *o)
 
    On success, return a list of the items in object *o*, where each item is a tuple
    containing a key-value pair.  On failure, return *NULL*. This is equivalent to
    the Python expression ``o.items()``.
 
 
-.. cfunction:: PyObject* PyMapping_GetItemString(PyObject *o, char *key)
+.. c:function:: PyObject* PyMapping_GetItemString(PyObject *o, char *key)
 
    Return element of *o* corresponding to the object *key* or *NULL* on failure.
    This is the equivalent of the Python expression ``o[key]``.
 
 
-.. cfunction:: int PyMapping_SetItemString(PyObject *o, char *key, PyObject *v)
+.. c:function:: int PyMapping_SetItemString(PyObject *o, char *key, PyObject *v)
 
    Map the object *key* to the value *v* in object *o*. Returns ``-1`` on failure.
    This is the equivalent of the Python statement ``o[key] = v``.
diff --git a/Doc/c-api/marshal.rst b/Doc/c-api/marshal.rst
index 34a83f4..b82cc96 100644
--- a/Doc/c-api/marshal.rst
+++ b/Doc/c-api/marshal.rst
@@ -20,17 +20,17 @@
 file format (currently 2).
 
 
-.. cfunction:: void PyMarshal_WriteLongToFile(long value, FILE *file, int version)
+.. c:function:: void PyMarshal_WriteLongToFile(long value, FILE *file, int version)
 
-   Marshal a :ctype:`long` integer, *value*, to *file*.  This will only write
+   Marshal a :c:type:`long` integer, *value*, to *file*.  This will only write
    the least-significant 32 bits of *value*; regardless of the size of the
-   native :ctype:`long` type.
+   native :c:type:`long` type.
 
    .. versionchanged:: 2.4
       *version* indicates the file format.
 
 
-.. cfunction:: void PyMarshal_WriteObjectToFile(PyObject *value, FILE *file, int version)
+.. c:function:: void PyMarshal_WriteObjectToFile(PyObject *value, FILE *file, int version)
 
    Marshal a Python object, *value*, to *file*.
 
@@ -38,7 +38,7 @@
       *version* indicates the file format.
 
 
-.. cfunction:: PyObject* PyMarshal_WriteObjectToString(PyObject *value, int version)
+.. c:function:: PyObject* PyMarshal_WriteObjectToString(PyObject *value, int version)
 
    Return a string object containing the marshalled representation of *value*.
 
@@ -55,31 +55,31 @@
 written using these routines?
 
 
-.. cfunction:: long PyMarshal_ReadLongFromFile(FILE *file)
+.. c:function:: long PyMarshal_ReadLongFromFile(FILE *file)
 
-   Return a C :ctype:`long` from the data stream in a :ctype:`FILE\*` opened
+   Return a C :c:type:`long` from the data stream in a :c:type:`FILE\*` opened
    for reading.  Only a 32-bit value can be read in using this function,
-   regardless of the native size of :ctype:`long`.
+   regardless of the native size of :c:type:`long`.
 
 
-.. cfunction:: int PyMarshal_ReadShortFromFile(FILE *file)
+.. c:function:: int PyMarshal_ReadShortFromFile(FILE *file)
 
-   Return a C :ctype:`short` from the data stream in a :ctype:`FILE\*` opened
+   Return a C :c:type:`short` from the data stream in a :c:type:`FILE\*` opened
    for reading.  Only a 16-bit value can be read in using this function,
-   regardless of the native size of :ctype:`short`.
+   regardless of the native size of :c:type:`short`.
 
 
-.. cfunction:: PyObject* PyMarshal_ReadObjectFromFile(FILE *file)
+.. c:function:: PyObject* PyMarshal_ReadObjectFromFile(FILE *file)
 
-   Return a Python object from the data stream in a :ctype:`FILE\*` opened for
+   Return a Python object from the data stream in a :c:type:`FILE\*` opened for
    reading.  On error, sets the appropriate exception (:exc:`EOFError` or
    :exc:`TypeError`) and returns *NULL*.
 
 
-.. cfunction:: PyObject* PyMarshal_ReadLastObjectFromFile(FILE *file)
+.. c:function:: PyObject* PyMarshal_ReadLastObjectFromFile(FILE *file)
 
-   Return a Python object from the data stream in a :ctype:`FILE\*` opened for
-   reading.  Unlike :cfunc:`PyMarshal_ReadObjectFromFile`, this function
+   Return a Python object from the data stream in a :c:type:`FILE\*` opened for
+   reading.  Unlike :c:func:`PyMarshal_ReadObjectFromFile`, this function
    assumes that no further objects will be read from the file, allowing it to
    aggressively load file data into memory so that the de-serialization can
    operate from data in memory rather than reading a byte at a time from the
@@ -88,7 +88,7 @@
    (:exc:`EOFError` or :exc:`TypeError`) and returns *NULL*.
 
 
-.. cfunction:: PyObject* PyMarshal_ReadObjectFromString(char *string, Py_ssize_t len)
+.. c:function:: PyObject* PyMarshal_ReadObjectFromString(char *string, Py_ssize_t len)
 
    Return a Python object from the data stream in a character buffer
    containing *len* bytes pointed to by *string*.  On error, sets the
@@ -96,5 +96,5 @@
    *NULL*.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *len*. This might require
+      This function used an :c:type:`int` type for *len*. This might require
       changes in your code for properly supporting 64-bit systems.
diff --git a/Doc/c-api/memory.rst b/Doc/c-api/memory.rst
index 81d7cd9..b80b3d5 100644
--- a/Doc/c-api/memory.rst
+++ b/Doc/c-api/memory.rst
@@ -47,8 +47,8 @@
    single: free()
 
 To avoid memory corruption, extension writers should never try to operate on
-Python objects with the functions exported by the C library: :cfunc:`malloc`,
-:cfunc:`calloc`, :cfunc:`realloc` and :cfunc:`free`.  This will result in  mixed
+Python objects with the functions exported by the C library: :c:func:`malloc`,
+:c:func:`calloc`, :c:func:`realloc` and :c:func:`free`.  This will result in  mixed
 calls between the C allocator and the Python memory manager with fatal
 consequences, because they implement different algorithms and operate on
 different heaps.  However, one may safely allocate and release memory blocks
@@ -94,65 +94,65 @@
 memory from the Python heap:
 
 
-.. cfunction:: void* PyMem_Malloc(size_t n)
+.. c:function:: void* PyMem_Malloc(size_t n)
 
-   Allocates *n* bytes and returns a pointer of type :ctype:`void\*` to the
+   Allocates *n* bytes and returns a pointer of type :c:type:`void\*` to the
    allocated memory, or *NULL* if the request fails. Requesting zero bytes returns
-   a distinct non-*NULL* pointer if possible, as if :cfunc:`PyMem_Malloc(1)` had
+   a distinct non-*NULL* pointer if possible, as if :c:func:`PyMem_Malloc(1)` had
    been called instead. The memory will not have been initialized in any way.
 
 
-.. cfunction:: void* PyMem_Realloc(void *p, size_t n)
+.. c:function:: void* PyMem_Realloc(void *p, size_t n)
 
    Resizes the memory block pointed to by *p* to *n* bytes. The contents will be
    unchanged to the minimum of the old and the new sizes. If *p* is *NULL*, the
-   call is equivalent to :cfunc:`PyMem_Malloc(n)`; else if *n* is equal to zero,
+   call is equivalent to :c:func:`PyMem_Malloc(n)`; else if *n* is equal to zero,
    the memory block is resized but is not freed, and the returned pointer is
    non-*NULL*.  Unless *p* is *NULL*, it must have been returned by a previous call
-   to :cfunc:`PyMem_Malloc` or :cfunc:`PyMem_Realloc`. If the request fails,
-   :cfunc:`PyMem_Realloc` returns *NULL* and *p* remains a valid pointer to the
+   to :c:func:`PyMem_Malloc` or :c:func:`PyMem_Realloc`. If the request fails,
+   :c:func:`PyMem_Realloc` returns *NULL* and *p* remains a valid pointer to the
    previous memory area.
 
 
-.. cfunction:: void PyMem_Free(void *p)
+.. c:function:: void PyMem_Free(void *p)
 
    Frees the memory block pointed to by *p*, which must have been returned by a
-   previous call to :cfunc:`PyMem_Malloc` or :cfunc:`PyMem_Realloc`.  Otherwise, or
-   if :cfunc:`PyMem_Free(p)` has been called before, undefined behavior occurs. If
+   previous call to :c:func:`PyMem_Malloc` or :c:func:`PyMem_Realloc`.  Otherwise, or
+   if :c:func:`PyMem_Free(p)` has been called before, undefined behavior occurs. If
    *p* is *NULL*, no operation is performed.
 
 The following type-oriented macros are provided for convenience.  Note  that
 *TYPE* refers to any C type.
 
 
-.. cfunction:: TYPE* PyMem_New(TYPE, size_t n)
+.. c:function:: TYPE* PyMem_New(TYPE, size_t n)
 
-   Same as :cfunc:`PyMem_Malloc`, but allocates ``(n * sizeof(TYPE))`` bytes of
-   memory.  Returns a pointer cast to :ctype:`TYPE\*`.  The memory will not have
+   Same as :c:func:`PyMem_Malloc`, but allocates ``(n * sizeof(TYPE))`` bytes of
+   memory.  Returns a pointer cast to :c:type:`TYPE\*`.  The memory will not have
    been initialized in any way.
 
 
-.. cfunction:: TYPE* PyMem_Resize(void *p, TYPE, size_t n)
+.. c:function:: TYPE* PyMem_Resize(void *p, TYPE, size_t n)
 
-   Same as :cfunc:`PyMem_Realloc`, but the memory block is resized to ``(n *
-   sizeof(TYPE))`` bytes.  Returns a pointer cast to :ctype:`TYPE\*`. On return,
+   Same as :c:func:`PyMem_Realloc`, but the memory block is resized to ``(n *
+   sizeof(TYPE))`` bytes.  Returns a pointer cast to :c:type:`TYPE\*`. On return,
    *p* will be a pointer to the new memory area, or *NULL* in the event of
    failure.  This is a C preprocessor macro; p is always reassigned.  Save
    the original value of p to avoid losing memory when handling errors.
 
 
-.. cfunction:: void PyMem_Del(void *p)
+.. c:function:: void PyMem_Del(void *p)
 
-   Same as :cfunc:`PyMem_Free`.
+   Same as :c:func:`PyMem_Free`.
 
 In addition, the following macro sets are provided for calling the Python memory
 allocator directly, without involving the C API functions listed above. However,
 note that their use does not preserve binary compatibility across Python
 versions and is therefore deprecated in extension modules.
 
-:cfunc:`PyMem_MALLOC`, :cfunc:`PyMem_REALLOC`, :cfunc:`PyMem_FREE`.
+:c:func:`PyMem_MALLOC`, :c:func:`PyMem_REALLOC`, :c:func:`PyMem_FREE`.
 
-:cfunc:`PyMem_NEW`, :cfunc:`PyMem_RESIZE`, :cfunc:`PyMem_DEL`.
+:c:func:`PyMem_NEW`, :c:func:`PyMem_RESIZE`, :c:func:`PyMem_DEL`.
 
 
 .. _memoryexamples:
@@ -201,8 +201,8 @@
    free(buf1);       /* Fatal -- should be PyMem_Del()  */
 
 In addition to the functions aimed at handling raw memory blocks from the Python
-heap, objects in Python are allocated and released with :cfunc:`PyObject_New`,
-:cfunc:`PyObject_NewVar` and :cfunc:`PyObject_Del`.
+heap, objects in Python are allocated and released with :c:func:`PyObject_New`,
+:c:func:`PyObject_NewVar` and :c:func:`PyObject_Del`.
 
 These will be explained in the next chapter on defining and implementing new
 object types in C.
diff --git a/Doc/c-api/method.rst b/Doc/c-api/method.rst
index add1f0f..71ddeda 100644
--- a/Doc/c-api/method.rst
+++ b/Doc/c-api/method.rst
@@ -10,21 +10,21 @@
 There are some useful functions that are useful for working with method objects.
 
 
-.. cvar:: PyTypeObject PyMethod_Type
+.. c:var:: PyTypeObject PyMethod_Type
 
    .. index:: single: MethodType (in module types)
 
-   This instance of :ctype:`PyTypeObject` represents the Python method type.  This
+   This instance of :c:type:`PyTypeObject` represents the Python method type.  This
    is exposed to Python programs as ``types.MethodType``.
 
 
-.. cfunction:: int PyMethod_Check(PyObject *o)
+.. c:function:: int PyMethod_Check(PyObject *o)
 
-   Return true if *o* is a method object (has type :cdata:`PyMethod_Type`).  The
+   Return true if *o* is a method object (has type :c:data:`PyMethod_Type`).  The
    parameter must not be *NULL*.
 
 
-.. cfunction:: PyObject* PyMethod_New(PyObject *func, PyObject *self, PyObject *class)
+.. c:function:: PyObject* PyMethod_New(PyObject *func, PyObject *self, PyObject *class)
 
    Return a new method object, with *func* being any callable object; this is the
    function that will be called when the method is called.  If this method should
@@ -33,39 +33,39 @@
    class which provides the unbound method..
 
 
-.. cfunction:: PyObject* PyMethod_Class(PyObject *meth)
+.. c:function:: PyObject* PyMethod_Class(PyObject *meth)
 
    Return the class object from which the method *meth* was created; if this was
    created from an instance, it will be the class of the instance.
 
 
-.. cfunction:: PyObject* PyMethod_GET_CLASS(PyObject *meth)
+.. c:function:: PyObject* PyMethod_GET_CLASS(PyObject *meth)
 
-   Macro version of :cfunc:`PyMethod_Class` which avoids error checking.
+   Macro version of :c:func:`PyMethod_Class` which avoids error checking.
 
 
-.. cfunction:: PyObject* PyMethod_Function(PyObject *meth)
+.. c:function:: PyObject* PyMethod_Function(PyObject *meth)
 
    Return the function object associated with the method *meth*.
 
 
-.. cfunction:: PyObject* PyMethod_GET_FUNCTION(PyObject *meth)
+.. c:function:: PyObject* PyMethod_GET_FUNCTION(PyObject *meth)
 
-   Macro version of :cfunc:`PyMethod_Function` which avoids error checking.
+   Macro version of :c:func:`PyMethod_Function` which avoids error checking.
 
 
-.. cfunction:: PyObject* PyMethod_Self(PyObject *meth)
+.. c:function:: PyObject* PyMethod_Self(PyObject *meth)
 
    Return the instance associated with the method *meth* if it is bound, otherwise
    return *NULL*.
 
 
-.. cfunction:: PyObject* PyMethod_GET_SELF(PyObject *meth)
+.. c:function:: PyObject* PyMethod_GET_SELF(PyObject *meth)
 
-   Macro version of :cfunc:`PyMethod_Self` which avoids error checking.
+   Macro version of :c:func:`PyMethod_Self` which avoids error checking.
 
 
-.. cfunction:: int PyMethod_ClearFreeList()
+.. c:function:: int PyMethod_ClearFreeList()
 
    Clear the free list. Return the total number of freed items.
 
diff --git a/Doc/c-api/module.rst b/Doc/c-api/module.rst
index 649c723..56e63cf 100644
--- a/Doc/c-api/module.rst
+++ b/Doc/c-api/module.rst
@@ -10,15 +10,15 @@
 There are only a few functions special to module objects.
 
 
-.. cvar:: PyTypeObject PyModule_Type
+.. c:var:: PyTypeObject PyModule_Type
 
    .. index:: single: ModuleType (in module types)
 
-   This instance of :ctype:`PyTypeObject` represents the Python module type.  This
+   This instance of :c:type:`PyTypeObject` represents the Python module type.  This
    is exposed to Python programs as ``types.ModuleType``.
 
 
-.. cfunction:: int PyModule_Check(PyObject *p)
+.. c:function:: int PyModule_Check(PyObject *p)
 
    Return true if *p* is a module object, or a subtype of a module object.
 
@@ -26,15 +26,15 @@
       Allowed subtypes to be accepted.
 
 
-.. cfunction:: int PyModule_CheckExact(PyObject *p)
+.. c:function:: int PyModule_CheckExact(PyObject *p)
 
    Return true if *p* is a module object, but not a subtype of
-   :cdata:`PyModule_Type`.
+   :c:data:`PyModule_Type`.
 
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyObject* PyModule_New(const char *name)
+.. c:function:: PyObject* PyModule_New(const char *name)
 
    .. index::
       single: __name__ (module attribute)
@@ -46,18 +46,18 @@
    the caller is responsible for providing a :attr:`__file__` attribute.
 
 
-.. cfunction:: PyObject* PyModule_GetDict(PyObject *module)
+.. c:function:: PyObject* PyModule_GetDict(PyObject *module)
 
    .. index:: single: __dict__ (module attribute)
 
    Return the dictionary object that implements *module*'s namespace; this object
    is the same as the :attr:`__dict__` attribute of the module object.  This
    function never fails.  It is recommended extensions use other
-   :cfunc:`PyModule_\*` and :cfunc:`PyObject_\*` functions rather than directly
+   :c:func:`PyModule_\*` and :c:func:`PyObject_\*` functions rather than directly
    manipulate a module's :attr:`__dict__`.
 
 
-.. cfunction:: char* PyModule_GetName(PyObject *module)
+.. c:function:: char* PyModule_GetName(PyObject *module)
 
    .. index::
       single: __name__ (module attribute)
@@ -67,7 +67,7 @@
    or if it is not a string, :exc:`SystemError` is raised and *NULL* is returned.
 
 
-.. cfunction:: char* PyModule_GetFilename(PyObject *module)
+.. c:function:: char* PyModule_GetFilename(PyObject *module)
 
    .. index::
       single: __file__ (module attribute)
@@ -78,7 +78,7 @@
    raise :exc:`SystemError` and return *NULL*.
 
 
-.. cfunction:: int PyModule_AddObject(PyObject *module, const char *name, PyObject *value)
+.. c:function:: int PyModule_AddObject(PyObject *module, const char *name, PyObject *value)
 
    Add an object to *module* as *name*.  This is a convenience function which can
    be used from the module's initialization function.  This steals a reference to
@@ -87,7 +87,7 @@
    .. versionadded:: 2.0
 
 
-.. cfunction:: int PyModule_AddIntConstant(PyObject *module, const char *name, long value)
+.. c:function:: int PyModule_AddIntConstant(PyObject *module, const char *name, long value)
 
    Add an integer constant to *module* as *name*.  This convenience function can be
    used from the module's initialization function. Return ``-1`` on error, ``0`` on
@@ -96,7 +96,7 @@
    .. versionadded:: 2.0
 
 
-.. cfunction:: int PyModule_AddStringConstant(PyObject *module, const char *name, const char *value)
+.. c:function:: int PyModule_AddStringConstant(PyObject *module, const char *name, const char *value)
 
    Add a string constant to *module* as *name*.  This convenience function can be
    used from the module's initialization function.  The string *value* must be
@@ -104,7 +104,7 @@
 
    .. versionadded:: 2.0
 
-.. cfunction:: int PyModule_AddIntMacro(PyObject *module, macro)
+.. c:function:: int PyModule_AddIntMacro(PyObject *module, macro)
 
    Add an int constant to *module*. The name and the value are taken from
    *macro*. For example ``PyModule_AddIntMacro(module, AF_INET)`` adds the int
@@ -113,7 +113,7 @@
 
    .. versionadded:: 2.6
 
-.. cfunction:: int PyModule_AddStringMacro(PyObject *module, macro)
+.. c:function:: int PyModule_AddStringMacro(PyObject *module, macro)
 
    Add a string constant to *module*.
 
diff --git a/Doc/c-api/none.rst b/Doc/c-api/none.rst
index 1bb603e..aeaca97 100644
--- a/Doc/c-api/none.rst
+++ b/Doc/c-api/none.rst
@@ -7,22 +7,22 @@
 
 .. index:: object: None
 
-Note that the :ctype:`PyTypeObject` for ``None`` is not directly exposed in the
+Note that the :c:type:`PyTypeObject` for ``None`` is not directly exposed in the
 Python/C API.  Since ``None`` is a singleton, testing for object identity (using
-``==`` in C) is sufficient. There is no :cfunc:`PyNone_Check` function for the
+``==`` in C) is sufficient. There is no :c:func:`PyNone_Check` function for the
 same reason.
 
 
-.. cvar:: PyObject* Py_None
+.. c:var:: PyObject* Py_None
 
    The Python ``None`` object, denoting lack of value.  This object has no methods.
    It needs to be treated just like any other object with respect to reference
    counts.
 
 
-.. cmacro:: Py_RETURN_NONE
+.. c:macro:: Py_RETURN_NONE
 
-   Properly handle returning :cdata:`Py_None` from within a C function.
+   Properly handle returning :c:data:`Py_None` from within a C function.
 
    .. versionadded:: 2.4
 
diff --git a/Doc/c-api/number.rst b/Doc/c-api/number.rst
index ffc2585..75b7341 100644
--- a/Doc/c-api/number.rst
+++ b/Doc/c-api/number.rst
@@ -6,37 +6,37 @@
 ===============
 
 
-.. cfunction:: int PyNumber_Check(PyObject *o)
+.. c:function:: int PyNumber_Check(PyObject *o)
 
    Returns ``1`` if the object *o* provides numeric protocols, and false otherwise.
    This function always succeeds.
 
 
-.. cfunction:: PyObject* PyNumber_Add(PyObject *o1, PyObject *o2)
+.. c:function:: PyObject* PyNumber_Add(PyObject *o1, PyObject *o2)
 
    Returns the result of adding *o1* and *o2*, or *NULL* on failure.  This is the
    equivalent of the Python expression ``o1 + o2``.
 
 
-.. cfunction:: PyObject* PyNumber_Subtract(PyObject *o1, PyObject *o2)
+.. c:function:: PyObject* PyNumber_Subtract(PyObject *o1, PyObject *o2)
 
    Returns the result of subtracting *o2* from *o1*, or *NULL* on failure.  This is
    the equivalent of the Python expression ``o1 - o2``.
 
 
-.. cfunction:: PyObject* PyNumber_Multiply(PyObject *o1, PyObject *o2)
+.. c:function:: PyObject* PyNumber_Multiply(PyObject *o1, PyObject *o2)
 
    Returns the result of multiplying *o1* and *o2*, or *NULL* on failure.  This is
    the equivalent of the Python expression ``o1 * o2``.
 
 
-.. cfunction:: PyObject* PyNumber_Divide(PyObject *o1, PyObject *o2)
+.. c:function:: PyObject* PyNumber_Divide(PyObject *o1, PyObject *o2)
 
    Returns the result of dividing *o1* by *o2*, or *NULL* on failure.  This is the
    equivalent of the Python expression ``o1 / o2``.
 
 
-.. cfunction:: PyObject* PyNumber_FloorDivide(PyObject *o1, PyObject *o2)
+.. c:function:: PyObject* PyNumber_FloorDivide(PyObject *o1, PyObject *o2)
 
    Return the floor of *o1* divided by *o2*, or *NULL* on failure.  This is
    equivalent to the "classic" division of integers.
@@ -44,7 +44,7 @@
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyObject* PyNumber_TrueDivide(PyObject *o1, PyObject *o2)
+.. c:function:: PyObject* PyNumber_TrueDivide(PyObject *o1, PyObject *o2)
 
    Return a reasonable approximation for the mathematical value of *o1* divided by
    *o2*, or *NULL* on failure.  The return value is "approximate" because binary
@@ -55,13 +55,13 @@
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyObject* PyNumber_Remainder(PyObject *o1, PyObject *o2)
+.. c:function:: PyObject* PyNumber_Remainder(PyObject *o1, PyObject *o2)
 
    Returns the remainder of dividing *o1* by *o2*, or *NULL* on failure.  This is
    the equivalent of the Python expression ``o1 % o2``.
 
 
-.. cfunction:: PyObject* PyNumber_Divmod(PyObject *o1, PyObject *o2)
+.. c:function:: PyObject* PyNumber_Divmod(PyObject *o1, PyObject *o2)
 
    .. index:: builtin: divmod
 
@@ -69,29 +69,29 @@
    the equivalent of the Python expression ``divmod(o1, o2)``.
 
 
-.. cfunction:: PyObject* PyNumber_Power(PyObject *o1, PyObject *o2, PyObject *o3)
+.. c:function:: PyObject* PyNumber_Power(PyObject *o1, PyObject *o2, PyObject *o3)
 
    .. index:: builtin: pow
 
    See the built-in function :func:`pow`. Returns *NULL* on failure.  This is the
    equivalent of the Python expression ``pow(o1, o2, o3)``, where *o3* is optional.
-   If *o3* is to be ignored, pass :cdata:`Py_None` in its place (passing *NULL* for
+   If *o3* is to be ignored, pass :c:data:`Py_None` in its place (passing *NULL* for
    *o3* would cause an illegal memory access).
 
 
-.. cfunction:: PyObject* PyNumber_Negative(PyObject *o)
+.. c:function:: PyObject* PyNumber_Negative(PyObject *o)
 
    Returns the negation of *o* on success, or *NULL* on failure. This is the
    equivalent of the Python expression ``-o``.
 
 
-.. cfunction:: PyObject* PyNumber_Positive(PyObject *o)
+.. c:function:: PyObject* PyNumber_Positive(PyObject *o)
 
    Returns *o* on success, or *NULL* on failure.  This is the equivalent of the
    Python expression ``+o``.
 
 
-.. cfunction:: PyObject* PyNumber_Absolute(PyObject *o)
+.. c:function:: PyObject* PyNumber_Absolute(PyObject *o)
 
    .. index:: builtin: abs
 
@@ -99,71 +99,71 @@
    of the Python expression ``abs(o)``.
 
 
-.. cfunction:: PyObject* PyNumber_Invert(PyObject *o)
+.. c:function:: PyObject* PyNumber_Invert(PyObject *o)
 
    Returns the bitwise negation of *o* on success, or *NULL* on failure.  This is
    the equivalent of the Python expression ``~o``.
 
 
-.. cfunction:: PyObject* PyNumber_Lshift(PyObject *o1, PyObject *o2)
+.. c:function:: PyObject* PyNumber_Lshift(PyObject *o1, PyObject *o2)
 
    Returns the result of left shifting *o1* by *o2* on success, or *NULL* on
    failure.  This is the equivalent of the Python expression ``o1 << o2``.
 
 
-.. cfunction:: PyObject* PyNumber_Rshift(PyObject *o1, PyObject *o2)
+.. c:function:: PyObject* PyNumber_Rshift(PyObject *o1, PyObject *o2)
 
    Returns the result of right shifting *o1* by *o2* on success, or *NULL* on
    failure.  This is the equivalent of the Python expression ``o1 >> o2``.
 
 
-.. cfunction:: PyObject* PyNumber_And(PyObject *o1, PyObject *o2)
+.. c:function:: PyObject* PyNumber_And(PyObject *o1, PyObject *o2)
 
    Returns the "bitwise and" of *o1* and *o2* on success and *NULL* on failure.
    This is the equivalent of the Python expression ``o1 & o2``.
 
 
-.. cfunction:: PyObject* PyNumber_Xor(PyObject *o1, PyObject *o2)
+.. c:function:: PyObject* PyNumber_Xor(PyObject *o1, PyObject *o2)
 
    Returns the "bitwise exclusive or" of *o1* by *o2* on success, or *NULL* on
    failure.  This is the equivalent of the Python expression ``o1 ^ o2``.
 
 
-.. cfunction:: PyObject* PyNumber_Or(PyObject *o1, PyObject *o2)
+.. c:function:: PyObject* PyNumber_Or(PyObject *o1, PyObject *o2)
 
    Returns the "bitwise or" of *o1* and *o2* on success, or *NULL* on failure.
    This is the equivalent of the Python expression ``o1 | o2``.
 
 
-.. cfunction:: PyObject* PyNumber_InPlaceAdd(PyObject *o1, PyObject *o2)
+.. c:function:: PyObject* PyNumber_InPlaceAdd(PyObject *o1, PyObject *o2)
 
    Returns the result of adding *o1* and *o2*, or *NULL* on failure.  The operation
    is done *in-place* when *o1* supports it.  This is the equivalent of the Python
    statement ``o1 += o2``.
 
 
-.. cfunction:: PyObject* PyNumber_InPlaceSubtract(PyObject *o1, PyObject *o2)
+.. c:function:: PyObject* PyNumber_InPlaceSubtract(PyObject *o1, PyObject *o2)
 
    Returns the result of subtracting *o2* from *o1*, or *NULL* on failure.  The
    operation is done *in-place* when *o1* supports it.  This is the equivalent of
    the Python statement ``o1 -= o2``.
 
 
-.. cfunction:: PyObject* PyNumber_InPlaceMultiply(PyObject *o1, PyObject *o2)
+.. c:function:: PyObject* PyNumber_InPlaceMultiply(PyObject *o1, PyObject *o2)
 
    Returns the result of multiplying *o1* and *o2*, or *NULL* on failure.  The
    operation is done *in-place* when *o1* supports it.  This is the equivalent of
    the Python statement ``o1 *= o2``.
 
 
-.. cfunction:: PyObject* PyNumber_InPlaceDivide(PyObject *o1, PyObject *o2)
+.. c:function:: PyObject* PyNumber_InPlaceDivide(PyObject *o1, PyObject *o2)
 
    Returns the result of dividing *o1* by *o2*, or *NULL* on failure.  The
    operation is done *in-place* when *o1* supports it. This is the equivalent of
    the Python statement ``o1 /= o2``.
 
 
-.. cfunction:: PyObject* PyNumber_InPlaceFloorDivide(PyObject *o1, PyObject *o2)
+.. c:function:: PyObject* PyNumber_InPlaceFloorDivide(PyObject *o1, PyObject *o2)
 
    Returns the mathematical floor of dividing *o1* by *o2*, or *NULL* on failure.
    The operation is done *in-place* when *o1* supports it.  This is the equivalent
@@ -172,7 +172,7 @@
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyObject* PyNumber_InPlaceTrueDivide(PyObject *o1, PyObject *o2)
+.. c:function:: PyObject* PyNumber_InPlaceTrueDivide(PyObject *o1, PyObject *o2)
 
    Return a reasonable approximation for the mathematical value of *o1* divided by
    *o2*, or *NULL* on failure.  The return value is "approximate" because binary
@@ -183,64 +183,64 @@
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyObject* PyNumber_InPlaceRemainder(PyObject *o1, PyObject *o2)
+.. c:function:: PyObject* PyNumber_InPlaceRemainder(PyObject *o1, PyObject *o2)
 
    Returns the remainder of dividing *o1* by *o2*, or *NULL* on failure.  The
    operation is done *in-place* when *o1* supports it.  This is the equivalent of
    the Python statement ``o1 %= o2``.
 
 
-.. cfunction:: PyObject* PyNumber_InPlacePower(PyObject *o1, PyObject *o2, PyObject *o3)
+.. c:function:: PyObject* PyNumber_InPlacePower(PyObject *o1, PyObject *o2, PyObject *o3)
 
    .. index:: builtin: pow
 
    See the built-in function :func:`pow`. Returns *NULL* on failure.  The operation
    is done *in-place* when *o1* supports it.  This is the equivalent of the Python
-   statement ``o1 **= o2`` when o3 is :cdata:`Py_None`, or an in-place variant of
-   ``pow(o1, o2, o3)`` otherwise. If *o3* is to be ignored, pass :cdata:`Py_None`
+   statement ``o1 **= o2`` when o3 is :c:data:`Py_None`, or an in-place variant of
+   ``pow(o1, o2, o3)`` otherwise. If *o3* is to be ignored, pass :c:data:`Py_None`
    in its place (passing *NULL* for *o3* would cause an illegal memory access).
 
 
-.. cfunction:: PyObject* PyNumber_InPlaceLshift(PyObject *o1, PyObject *o2)
+.. c:function:: PyObject* PyNumber_InPlaceLshift(PyObject *o1, PyObject *o2)
 
    Returns the result of left shifting *o1* by *o2* on success, or *NULL* on
    failure.  The operation is done *in-place* when *o1* supports it.  This is the
    equivalent of the Python statement ``o1 <<= o2``.
 
 
-.. cfunction:: PyObject* PyNumber_InPlaceRshift(PyObject *o1, PyObject *o2)
+.. c:function:: PyObject* PyNumber_InPlaceRshift(PyObject *o1, PyObject *o2)
 
    Returns the result of right shifting *o1* by *o2* on success, or *NULL* on
    failure.  The operation is done *in-place* when *o1* supports it.  This is the
    equivalent of the Python statement ``o1 >>= o2``.
 
 
-.. cfunction:: PyObject* PyNumber_InPlaceAnd(PyObject *o1, PyObject *o2)
+.. c:function:: PyObject* PyNumber_InPlaceAnd(PyObject *o1, PyObject *o2)
 
    Returns the "bitwise and" of *o1* and *o2* on success and *NULL* on failure. The
    operation is done *in-place* when *o1* supports it.  This is the equivalent of
    the Python statement ``o1 &= o2``.
 
 
-.. cfunction:: PyObject* PyNumber_InPlaceXor(PyObject *o1, PyObject *o2)
+.. c:function:: PyObject* PyNumber_InPlaceXor(PyObject *o1, PyObject *o2)
 
    Returns the "bitwise exclusive or" of *o1* by *o2* on success, or *NULL* on
    failure.  The operation is done *in-place* when *o1* supports it.  This is the
    equivalent of the Python statement ``o1 ^= o2``.
 
 
-.. cfunction:: PyObject* PyNumber_InPlaceOr(PyObject *o1, PyObject *o2)
+.. c:function:: PyObject* PyNumber_InPlaceOr(PyObject *o1, PyObject *o2)
 
    Returns the "bitwise or" of *o1* and *o2* on success, or *NULL* on failure.  The
    operation is done *in-place* when *o1* supports it.  This is the equivalent of
    the Python statement ``o1 |= o2``.
 
 
-.. cfunction:: int PyNumber_Coerce(PyObject **p1, PyObject **p2)
+.. c:function:: int PyNumber_Coerce(PyObject **p1, PyObject **p2)
 
    .. index:: builtin: coerce
 
-   This function takes the addresses of two variables of type :ctype:`PyObject\*`.
+   This function takes the addresses of two variables of type :c:type:`PyObject\*`.
    If the objects pointed to by ``*p1`` and ``*p2`` have the same type, increment
    their reference count and return ``0`` (success). If the objects can be
    converted to a common numeric type, replace ``*p1`` and ``*p2`` by their
@@ -250,14 +250,14 @@
    &o2)`` is equivalent to the Python statement ``o1, o2 = coerce(o1, o2)``.
 
 
-.. cfunction:: int PyNumber_CoerceEx(PyObject **p1, PyObject **p2)
+.. c:function:: int PyNumber_CoerceEx(PyObject **p1, PyObject **p2)
 
-   This function is similar to :cfunc:`PyNumber_Coerce`, except that it returns
+   This function is similar to :c:func:`PyNumber_Coerce`, except that it returns
    ``1`` when the conversion is not possible and when no error is raised.
    Reference counts are still not increased in this case.
 
 
-.. cfunction:: PyObject* PyNumber_Int(PyObject *o)
+.. c:function:: PyObject* PyNumber_Int(PyObject *o)
 
    .. index:: builtin: int
 
@@ -266,7 +266,7 @@
    instead. This is the equivalent of the Python expression ``int(o)``.
 
 
-.. cfunction:: PyObject* PyNumber_Long(PyObject *o)
+.. c:function:: PyObject* PyNumber_Long(PyObject *o)
 
    .. index:: builtin: long
 
@@ -274,7 +274,7 @@
    failure.  This is the equivalent of the Python expression ``long(o)``.
 
 
-.. cfunction:: PyObject* PyNumber_Float(PyObject *o)
+.. c:function:: PyObject* PyNumber_Float(PyObject *o)
 
    .. index:: builtin: float
 
@@ -282,7 +282,7 @@
    This is the equivalent of the Python expression ``float(o)``.
 
 
-.. cfunction:: PyObject* PyNumber_Index(PyObject *o)
+.. c:function:: PyObject* PyNumber_Index(PyObject *o)
 
    Returns the *o* converted to a Python int or long on success or *NULL* with a
    :exc:`TypeError` exception raised on failure.
@@ -290,18 +290,18 @@
    .. versionadded:: 2.5
 
 
-.. cfunction:: PyObject* PyNumber_ToBase(PyObject *n, int base)
+.. c:function:: PyObject* PyNumber_ToBase(PyObject *n, int base)
 
    Returns the integer *n* converted to *base* as a string with a base
    marker of ``'0b'``, ``'0o'``, or ``'0x'`` if applicable.  When
    *base* is not 2, 8, 10, or 16, the format is ``'x#num'`` where x is the
    base. If *n* is not an int object, it is converted with
-   :cfunc:`PyNumber_Index` first.
+   :c:func:`PyNumber_Index` first.
 
    .. versionadded:: 2.6
 
 
-.. cfunction:: Py_ssize_t PyNumber_AsSsize_t(PyObject *o, PyObject *exc)
+.. c:function:: Py_ssize_t PyNumber_AsSsize_t(PyObject *o, PyObject *exc)
 
    Returns *o* converted to a Py_ssize_t value if *o* can be interpreted as an
    integer. If *o* can be converted to a Python int or long but the attempt to
@@ -314,7 +314,7 @@
    .. versionadded:: 2.5
 
 
-.. cfunction:: int PyIndex_Check(PyObject *o)
+.. c:function:: int PyIndex_Check(PyObject *o)
 
    Returns True if *o* is an index integer (has the nb_index slot of  the
    tp_as_number structure filled in).
diff --git a/Doc/c-api/objbuffer.rst b/Doc/c-api/objbuffer.rst
index 93f5ff0..90dce62 100644
--- a/Doc/c-api/objbuffer.rst
+++ b/Doc/c-api/objbuffer.rst
@@ -13,7 +13,7 @@
 :ref:`bufferobjects` for more information.
 
 
-.. cfunction:: int PyObject_AsCharBuffer(PyObject *obj, const char **buffer, Py_ssize_t *buffer_len)
+.. c:function:: int PyObject_AsCharBuffer(PyObject *obj, const char **buffer, Py_ssize_t *buffer_len)
 
    Returns a pointer to a read-only memory location usable as character-based
    input.  The *obj* argument must support the single-segment character buffer
@@ -24,11 +24,11 @@
    .. versionadded:: 1.6
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int *` type for *buffer_len*. This might
+      This function used an :c:type:`int *` type for *buffer_len*. This might
       require changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: int PyObject_AsReadBuffer(PyObject *obj, const void **buffer, Py_ssize_t *buffer_len)
+.. c:function:: int PyObject_AsReadBuffer(PyObject *obj, const void **buffer, Py_ssize_t *buffer_len)
 
    Returns a pointer to a read-only memory location containing arbitrary data.
    The *obj* argument must support the single-segment readable buffer
@@ -39,11 +39,11 @@
    .. versionadded:: 1.6
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int *` type for *buffer_len*. This might
+      This function used an :c:type:`int *` type for *buffer_len*. This might
       require changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: int PyObject_CheckReadBuffer(PyObject *o)
+.. c:function:: int PyObject_CheckReadBuffer(PyObject *o)
 
    Returns ``1`` if *o* supports the single-segment readable buffer interface.
    Otherwise returns ``0``.
@@ -51,7 +51,7 @@
    .. versionadded:: 2.2
 
 
-.. cfunction:: int PyObject_AsWriteBuffer(PyObject *obj, void **buffer, Py_ssize_t *buffer_len)
+.. c:function:: int PyObject_AsWriteBuffer(PyObject *obj, void **buffer, Py_ssize_t *buffer_len)
 
    Returns a pointer to a writeable memory location.  The *obj* argument must
    support the single-segment, character buffer interface.  On success,
@@ -61,6 +61,6 @@
    .. versionadded:: 1.6
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int *` type for *buffer_len*. This might
+      This function used an :c:type:`int *` type for *buffer_len*. This might
       require changes in your code for properly supporting 64-bit systems.
 
diff --git a/Doc/c-api/object.rst b/Doc/c-api/object.rst
index 717fb08..a02326f 100644
--- a/Doc/c-api/object.rst
+++ b/Doc/c-api/object.rst
@@ -6,7 +6,7 @@
 ===============
 
 
-.. cfunction:: int PyObject_Print(PyObject *o, FILE *fp, int flags)
+.. c:function:: int PyObject_Print(PyObject *o, FILE *fp, int flags)
 
    Print an object *o*, on file *fp*.  Returns ``-1`` on error.  The flags argument
    is used to enable certain printing options.  The only option currently supported
@@ -14,35 +14,35 @@
    instead of the :func:`repr`.
 
 
-.. cfunction:: int PyObject_HasAttr(PyObject *o, PyObject *attr_name)
+.. c:function:: int PyObject_HasAttr(PyObject *o, PyObject *attr_name)
 
    Returns ``1`` if *o* has the attribute *attr_name*, and ``0`` otherwise.  This
    is equivalent to the Python expression ``hasattr(o, attr_name)``.  This function
    always succeeds.
 
 
-.. cfunction:: int PyObject_HasAttrString(PyObject *o, const char *attr_name)
+.. c:function:: int PyObject_HasAttrString(PyObject *o, const char *attr_name)
 
    Returns ``1`` if *o* has the attribute *attr_name*, and ``0`` otherwise.  This
    is equivalent to the Python expression ``hasattr(o, attr_name)``.  This function
    always succeeds.
 
 
-.. cfunction:: PyObject* PyObject_GetAttr(PyObject *o, PyObject *attr_name)
+.. c:function:: PyObject* PyObject_GetAttr(PyObject *o, PyObject *attr_name)
 
    Retrieve an attribute named *attr_name* from object *o*. Returns the attribute
    value on success, or *NULL* on failure.  This is the equivalent of the Python
    expression ``o.attr_name``.
 
 
-.. cfunction:: PyObject* PyObject_GetAttrString(PyObject *o, const char *attr_name)
+.. c:function:: PyObject* PyObject_GetAttrString(PyObject *o, const char *attr_name)
 
    Retrieve an attribute named *attr_name* from object *o*. Returns the attribute
    value on success, or *NULL* on failure. This is the equivalent of the Python
    expression ``o.attr_name``.
 
 
-.. cfunction:: PyObject* PyObject_GenericGetAttr(PyObject *o, PyObject *name)
+.. c:function:: PyObject* PyObject_GenericGetAttr(PyObject *o, PyObject *name)
 
    Generic attribute getter function that is meant to be put into a type
    object's ``tp_getattro`` slot.  It looks for a descriptor in the dictionary
@@ -52,21 +52,21 @@
    descriptors don't.  Otherwise, an :exc:`AttributeError` is raised.
 
 
-.. cfunction:: int PyObject_SetAttr(PyObject *o, PyObject *attr_name, PyObject *v)
+.. c:function:: int PyObject_SetAttr(PyObject *o, PyObject *attr_name, PyObject *v)
 
    Set the value of the attribute named *attr_name*, for object *o*, to the value
    *v*. Returns ``-1`` on failure.  This is the equivalent of the Python statement
    ``o.attr_name = v``.
 
 
-.. cfunction:: int PyObject_SetAttrString(PyObject *o, const char *attr_name, PyObject *v)
+.. c:function:: int PyObject_SetAttrString(PyObject *o, const char *attr_name, PyObject *v)
 
    Set the value of the attribute named *attr_name*, for object *o*, to the value
    *v*. Returns ``-1`` on failure.  This is the equivalent of the Python statement
    ``o.attr_name = v``.
 
 
-.. cfunction:: int PyObject_GenericSetAttr(PyObject *o, PyObject *name, PyObject *value)
+.. c:function:: int PyObject_GenericSetAttr(PyObject *o, PyObject *name, PyObject *value)
 
    Generic attribute setter function that is meant to be put into a type
    object's ``tp_setattro`` slot.  It looks for a data descriptor in the
@@ -76,19 +76,19 @@
    an :exc:`AttributeError` is raised and ``-1`` is returned.
 
 
-.. cfunction:: int PyObject_DelAttr(PyObject *o, PyObject *attr_name)
+.. c:function:: int PyObject_DelAttr(PyObject *o, PyObject *attr_name)
 
    Delete attribute named *attr_name*, for object *o*. Returns ``-1`` on failure.
    This is the equivalent of the Python statement ``del o.attr_name``.
 
 
-.. cfunction:: int PyObject_DelAttrString(PyObject *o, const char *attr_name)
+.. c:function:: int PyObject_DelAttrString(PyObject *o, const char *attr_name)
 
    Delete attribute named *attr_name*, for object *o*. Returns ``-1`` on failure.
    This is the equivalent of the Python statement ``del o.attr_name``.
 
 
-.. cfunction:: PyObject* PyObject_RichCompare(PyObject *o1, PyObject *o2, int opid)
+.. c:function:: PyObject* PyObject_RichCompare(PyObject *o1, PyObject *o2, int opid)
 
    Compare the values of *o1* and *o2* using the operation specified by *opid*,
    which must be one of :const:`Py_LT`, :const:`Py_LE`, :const:`Py_EQ`,
@@ -98,7 +98,7 @@
    to *opid*. Returns the value of the comparison on success, or *NULL* on failure.
 
 
-.. cfunction:: int PyObject_RichCompareBool(PyObject *o1, PyObject *o2, int opid)
+.. c:function:: int PyObject_RichCompareBool(PyObject *o1, PyObject *o2, int opid)
 
    Compare the values of *o1* and *o2* using the operation specified by *opid*,
    which must be one of :const:`Py_LT`, :const:`Py_LE`, :const:`Py_EQ`,
@@ -109,10 +109,10 @@
    *opid*.
 
 .. note::
-   If *o1* and *o2* are the same object, :cfunc:`PyObject_RichCompareBool`
+   If *o1* and *o2* are the same object, :c:func:`PyObject_RichCompareBool`
    will always return ``1`` for :const:`Py_EQ` and ``0`` for :const:`Py_NE`.
 
-.. cfunction:: int PyObject_Cmp(PyObject *o1, PyObject *o2, int *result)
+.. c:function:: int PyObject_Cmp(PyObject *o1, PyObject *o2, int *result)
 
    .. index:: builtin: cmp
 
@@ -122,18 +122,18 @@
    the Python statement ``result = cmp(o1, o2)``.
 
 
-.. cfunction:: int PyObject_Compare(PyObject *o1, PyObject *o2)
+.. c:function:: int PyObject_Compare(PyObject *o1, PyObject *o2)
 
    .. index:: builtin: cmp
 
    Compare the values of *o1* and *o2* using a routine provided by *o1*, if one
    exists, otherwise with a routine provided by *o2*.  Returns the result of the
    comparison on success.  On error, the value returned is undefined; use
-   :cfunc:`PyErr_Occurred` to detect an error.  This is equivalent to the Python
+   :c:func:`PyErr_Occurred` to detect an error.  This is equivalent to the Python
    expression ``cmp(o1, o2)``.
 
 
-.. cfunction:: PyObject* PyObject_Repr(PyObject *o)
+.. c:function:: PyObject* PyObject_Repr(PyObject *o)
 
    .. index:: builtin: repr
 
@@ -143,7 +143,7 @@
    by reverse quotes.
 
 
-.. cfunction:: PyObject* PyObject_Str(PyObject *o)
+.. c:function:: PyObject* PyObject_Str(PyObject *o)
 
    .. index:: builtin: str
 
@@ -153,15 +153,15 @@
    by the :keyword:`print` statement.
 
 
-.. cfunction:: PyObject* PyObject_Bytes(PyObject *o)
+.. c:function:: PyObject* PyObject_Bytes(PyObject *o)
 
    .. index:: builtin: bytes
 
    Compute a bytes representation of object *o*.  In 2.x, this is just a alias
-   for :cfunc:`PyObject_Str`.
+   for :c:func:`PyObject_Str`.
 
 
-.. cfunction:: PyObject* PyObject_Unicode(PyObject *o)
+.. c:function:: PyObject* PyObject_Unicode(PyObject *o)
 
    .. index:: builtin: unicode
 
@@ -171,11 +171,11 @@
    function.
 
 
-.. cfunction:: int PyObject_IsInstance(PyObject *inst, PyObject *cls)
+.. c:function:: int PyObject_IsInstance(PyObject *inst, PyObject *cls)
 
    Returns ``1`` if *inst* is an instance of the class *cls* or a subclass of
    *cls*, or ``0`` if not.  On error, returns ``-1`` and sets an exception.  If
-   *cls* is a type object rather than a class object, :cfunc:`PyObject_IsInstance`
+   *cls* is a type object rather than a class object, :c:func:`PyObject_IsInstance`
    returns ``1`` if *inst* is of type *cls*.  If *cls* is a tuple, the check will
    be done against every entry in *cls*. The result will be ``1`` when at least one
    of the checks returns ``1``, otherwise it will be ``0``. If *inst* is not a
@@ -195,13 +195,13 @@
 :class:`A` if it inherits from :class:`A` either directly or indirectly.  If
 either is not a class object, a more general mechanism is used to determine the
 class relationship of the two objects.  When testing if *B* is a subclass of
-*A*, if *A* is *B*, :cfunc:`PyObject_IsSubclass` returns true.  If *A* and *B*
+*A*, if *A* is *B*, :c:func:`PyObject_IsSubclass` returns true.  If *A* and *B*
 are different objects, *B*'s :attr:`__bases__` attribute is searched in a
 depth-first fashion for *A* --- the presence of the :attr:`__bases__` attribute
 is considered sufficient for this determination.
 
 
-.. cfunction:: int PyObject_IsSubclass(PyObject *derived, PyObject *cls)
+.. c:function:: int PyObject_IsSubclass(PyObject *derived, PyObject *cls)
 
    Returns ``1`` if the class *derived* is identical to or derived from the class
    *cls*, otherwise returns ``0``.  In case of an error, returns ``-1``. If *cls*
@@ -216,13 +216,13 @@
       Older versions of Python did not support a tuple as the second argument.
 
 
-.. cfunction:: int PyCallable_Check(PyObject *o)
+.. c:function:: int PyCallable_Check(PyObject *o)
 
    Determine if the object *o* is callable.  Return ``1`` if the object is callable
    and ``0`` otherwise.  This function always succeeds.
 
 
-.. cfunction:: PyObject* PyObject_Call(PyObject *callable_object, PyObject *args, PyObject *kw)
+.. c:function:: PyObject* PyObject_Call(PyObject *callable_object, PyObject *args, PyObject *kw)
 
    .. index:: builtin: apply
 
@@ -236,7 +236,7 @@
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyObject* PyObject_CallObject(PyObject *callable_object, PyObject *args)
+.. c:function:: PyObject* PyObject_CallObject(PyObject *callable_object, PyObject *args)
 
    .. index:: builtin: apply
 
@@ -247,52 +247,52 @@
    ``callable_object(*args)``.
 
 
-.. cfunction:: PyObject* PyObject_CallFunction(PyObject *callable, char *format, ...)
+.. c:function:: PyObject* PyObject_CallFunction(PyObject *callable, char *format, ...)
 
    .. index:: builtin: apply
 
    Call a callable Python object *callable*, with a variable number of C arguments.
-   The C arguments are described using a :cfunc:`Py_BuildValue` style format
+   The C arguments are described using a :c:func:`Py_BuildValue` style format
    string.  The format may be *NULL*, indicating that no arguments are provided.
    Returns the result of the call on success, or *NULL* on failure.  This is the
    equivalent of the Python expression ``apply(callable, args)`` or
-   ``callable(*args)``. Note that if you only pass :ctype:`PyObject \*` args,
-   :cfunc:`PyObject_CallFunctionObjArgs` is a faster alternative.
+   ``callable(*args)``. Note that if you only pass :c:type:`PyObject \*` args,
+   :c:func:`PyObject_CallFunctionObjArgs` is a faster alternative.
 
 
-.. cfunction:: PyObject* PyObject_CallMethod(PyObject *o, char *method, char *format, ...)
+.. c:function:: PyObject* PyObject_CallMethod(PyObject *o, char *method, char *format, ...)
 
    Call the method named *method* of object *o* with a variable number of C
-   arguments.  The C arguments are described by a :cfunc:`Py_BuildValue` format
+   arguments.  The C arguments are described by a :c:func:`Py_BuildValue` format
    string that should  produce a tuple.  The format may be *NULL*, indicating that
    no arguments are provided. Returns the result of the call on success, or *NULL*
    on failure.  This is the equivalent of the Python expression ``o.method(args)``.
-   Note that if you only pass :ctype:`PyObject \*` args,
-   :cfunc:`PyObject_CallMethodObjArgs` is a faster alternative.
+   Note that if you only pass :c:type:`PyObject \*` args,
+   :c:func:`PyObject_CallMethodObjArgs` is a faster alternative.
 
 
-.. cfunction:: PyObject* PyObject_CallFunctionObjArgs(PyObject *callable, ..., NULL)
+.. c:function:: PyObject* PyObject_CallFunctionObjArgs(PyObject *callable, ..., NULL)
 
    Call a callable Python object *callable*, with a variable number of
-   :ctype:`PyObject\*` arguments.  The arguments are provided as a variable number
+   :c:type:`PyObject\*` arguments.  The arguments are provided as a variable number
    of parameters followed by *NULL*. Returns the result of the call on success, or
    *NULL* on failure.
 
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyObject* PyObject_CallMethodObjArgs(PyObject *o, PyObject *name, ..., NULL)
+.. c:function:: PyObject* PyObject_CallMethodObjArgs(PyObject *o, PyObject *name, ..., NULL)
 
    Calls a method of the object *o*, where the name of the method is given as a
    Python string object in *name*.  It is called with a variable number of
-   :ctype:`PyObject\*` arguments.  The arguments are provided as a variable number
+   :c:type:`PyObject\*` arguments.  The arguments are provided as a variable number
    of parameters followed by *NULL*. Returns the result of the call on success, or
    *NULL* on failure.
 
    .. versionadded:: 2.2
 
 
-.. cfunction:: long PyObject_Hash(PyObject *o)
+.. c:function:: long PyObject_Hash(PyObject *o)
 
    .. index:: builtin: hash
 
@@ -300,7 +300,7 @@
    This is the equivalent of the Python expression ``hash(o)``.
 
 
-.. cfunction:: long PyObject_HashNotImplemented(PyObject *o)
+.. c:function:: long PyObject_HashNotImplemented(PyObject *o)
 
    Set a :exc:`TypeError` indicating that ``type(o)`` is not hashable and return ``-1``.
    This function receives special treatment when stored in a ``tp_hash`` slot,
@@ -310,21 +310,21 @@
    .. versionadded:: 2.6
 
 
-.. cfunction:: int PyObject_IsTrue(PyObject *o)
+.. c:function:: int PyObject_IsTrue(PyObject *o)
 
    Returns ``1`` if the object *o* is considered to be true, and ``0`` otherwise.
    This is equivalent to the Python expression ``not not o``.  On failure, return
    ``-1``.
 
 
-.. cfunction:: int PyObject_Not(PyObject *o)
+.. c:function:: int PyObject_Not(PyObject *o)
 
    Returns ``0`` if the object *o* is considered to be true, and ``1`` otherwise.
    This is equivalent to the Python expression ``not o``.  On failure, return
    ``-1``.
 
 
-.. cfunction:: PyObject* PyObject_Type(PyObject *o)
+.. c:function:: PyObject* PyObject_Type(PyObject *o)
 
    .. index:: builtin: type
 
@@ -333,11 +333,11 @@
    is equivalent to the Python expression ``type(o)``. This function increments the
    reference count of the return value. There's really no reason to use this
    function instead of the common expression ``o->ob_type``, which returns a
-   pointer of type :ctype:`PyTypeObject\*`, except when the incremented reference
+   pointer of type :c:type:`PyTypeObject\*`, except when the incremented reference
    count is needed.
 
 
-.. cfunction:: int PyObject_TypeCheck(PyObject *o, PyTypeObject *type)
+.. c:function:: int PyObject_TypeCheck(PyObject *o, PyTypeObject *type)
 
    Return true if the object *o* is of type *type* or a subtype of *type*.  Both
    parameters must be non-*NULL*.
@@ -345,7 +345,7 @@
    .. versionadded:: 2.2
 
 
-.. cfunction:: Py_ssize_t PyObject_Length(PyObject *o)
+.. c:function:: Py_ssize_t PyObject_Length(PyObject *o)
                Py_ssize_t PyObject_Size(PyObject *o)
 
    .. index:: builtin: len
@@ -355,29 +355,29 @@
    returned.  This is the equivalent to the Python expression ``len(o)``.
 
    .. versionchanged:: 2.5
-      These functions returned an :ctype:`int` type. This might require
+      These functions returned an :c:type:`int` type. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyObject_GetItem(PyObject *o, PyObject *key)
+.. c:function:: PyObject* PyObject_GetItem(PyObject *o, PyObject *key)
 
    Return element of *o* corresponding to the object *key* or *NULL* on failure.
    This is the equivalent of the Python expression ``o[key]``.
 
 
-.. cfunction:: int PyObject_SetItem(PyObject *o, PyObject *key, PyObject *v)
+.. c:function:: int PyObject_SetItem(PyObject *o, PyObject *key, PyObject *v)
 
    Map the object *key* to the value *v*.  Returns ``-1`` on failure.  This is the
    equivalent of the Python statement ``o[key] = v``.
 
 
-.. cfunction:: int PyObject_DelItem(PyObject *o, PyObject *key)
+.. c:function:: int PyObject_DelItem(PyObject *o, PyObject *key)
 
    Delete the mapping for *key* from *o*.  Returns ``-1`` on failure. This is the
    equivalent of the Python statement ``del o[key]``.
 
 
-.. cfunction:: int PyObject_AsFileDescriptor(PyObject *o)
+.. c:function:: int PyObject_AsFileDescriptor(PyObject *o)
 
    Derives a file descriptor from a Python object.  If the object is an integer or
    long integer, its value is returned.  If not, the object's :meth:`fileno` method
@@ -385,16 +385,16 @@
    is returned as the file descriptor value.  Returns ``-1`` on failure.
 
 
-.. cfunction:: PyObject* PyObject_Dir(PyObject *o)
+.. c:function:: PyObject* PyObject_Dir(PyObject *o)
 
    This is equivalent to the Python expression ``dir(o)``, returning a (possibly
    empty) list of strings appropriate for the object argument, or *NULL* if there
    was an error.  If the argument is *NULL*, this is like the Python ``dir()``,
    returning the names of the current locals; in this case, if no execution frame
-   is active then *NULL* is returned but :cfunc:`PyErr_Occurred` will return false.
+   is active then *NULL* is returned but :c:func:`PyErr_Occurred` will return false.
 
 
-.. cfunction:: PyObject* PyObject_GetIter(PyObject *o)
+.. c:function:: PyObject* PyObject_GetIter(PyObject *o)
 
    This is equivalent to the Python expression ``iter(o)``. It returns a new
    iterator for the object argument, or the object  itself if the object is already
diff --git a/Doc/c-api/refcounting.rst b/Doc/c-api/refcounting.rst
index d3fd47f..49675a8 100644
--- a/Doc/c-api/refcounting.rst
+++ b/Doc/c-api/refcounting.rst
@@ -11,22 +11,22 @@
 objects.
 
 
-.. cfunction:: void Py_INCREF(PyObject *o)
+.. c:function:: void Py_INCREF(PyObject *o)
 
    Increment the reference count for object *o*.  The object must not be *NULL*; if
-   you aren't sure that it isn't *NULL*, use :cfunc:`Py_XINCREF`.
+   you aren't sure that it isn't *NULL*, use :c:func:`Py_XINCREF`.
 
 
-.. cfunction:: void Py_XINCREF(PyObject *o)
+.. c:function:: void Py_XINCREF(PyObject *o)
 
    Increment the reference count for object *o*.  The object may be *NULL*, in
    which case the macro has no effect.
 
 
-.. cfunction:: void Py_DECREF(PyObject *o)
+.. c:function:: void Py_DECREF(PyObject *o)
 
    Decrement the reference count for object *o*.  The object must not be *NULL*; if
-   you aren't sure that it isn't *NULL*, use :cfunc:`Py_XDECREF`.  If the reference
+   you aren't sure that it isn't *NULL*, use :c:func:`Py_XDECREF`.  If the reference
    count reaches zero, the object's type's deallocation function (which must not be
    *NULL*) is invoked.
 
@@ -36,25 +36,25 @@
       when a class instance with a :meth:`__del__` method is deallocated).  While
       exceptions in such code are not propagated, the executed code has free access to
       all Python global variables.  This means that any object that is reachable from
-      a global variable should be in a consistent state before :cfunc:`Py_DECREF` is
+      a global variable should be in a consistent state before :c:func:`Py_DECREF` is
       invoked.  For example, code to delete an object from a list should copy a
       reference to the deleted object in a temporary variable, update the list data
-      structure, and then call :cfunc:`Py_DECREF` for the temporary variable.
+      structure, and then call :c:func:`Py_DECREF` for the temporary variable.
 
 
-.. cfunction:: void Py_XDECREF(PyObject *o)
+.. c:function:: void Py_XDECREF(PyObject *o)
 
    Decrement the reference count for object *o*.  The object may be *NULL*, in
    which case the macro has no effect; otherwise the effect is the same as for
-   :cfunc:`Py_DECREF`, and the same warning applies.
+   :c:func:`Py_DECREF`, and the same warning applies.
 
 
-.. cfunction:: void Py_CLEAR(PyObject *o)
+.. c:function:: void Py_CLEAR(PyObject *o)
 
    Decrement the reference count for object *o*.  The object may be *NULL*, in
    which case the macro has no effect; otherwise the effect is the same as for
-   :cfunc:`Py_DECREF`, except that the argument is also set to *NULL*.  The warning
-   for :cfunc:`Py_DECREF` does not apply with respect to the object passed because
+   :c:func:`Py_DECREF`, except that the argument is also set to *NULL*.  The warning
+   for :c:func:`Py_DECREF` does not apply with respect to the object passed because
    the macro carefully uses a temporary variable and sets the argument to *NULL*
    before decrementing its reference count.
 
@@ -65,10 +65,10 @@
 
 The following functions are for runtime dynamic embedding of Python:
 ``Py_IncRef(PyObject *o)``, ``Py_DecRef(PyObject *o)``. They are
-simply exported function versions of :cfunc:`Py_XINCREF` and
-:cfunc:`Py_XDECREF`, respectively.
+simply exported function versions of :c:func:`Py_XINCREF` and
+:c:func:`Py_XDECREF`, respectively.
 
 The following functions or macros are only for use within the interpreter core:
-:cfunc:`_Py_Dealloc`, :cfunc:`_Py_ForgetReference`, :cfunc:`_Py_NewReference`,
-as well as the global variable :cdata:`_Py_RefTotal`.
+:c:func:`_Py_Dealloc`, :c:func:`_Py_ForgetReference`, :c:func:`_Py_NewReference`,
+as well as the global variable :c:data:`_Py_RefTotal`.
 
diff --git a/Doc/c-api/reflection.rst b/Doc/c-api/reflection.rst
index 3996c1f..59edbb3 100644
--- a/Doc/c-api/reflection.rst
+++ b/Doc/c-api/reflection.rst
@@ -5,51 +5,51 @@
 Reflection
 ==========
 
-.. cfunction:: PyObject* PyEval_GetBuiltins()
+.. c:function:: PyObject* PyEval_GetBuiltins()
 
    Return a dictionary of the builtins in the current execution frame,
    or the interpreter of the thread state if no frame is currently executing.
 
 
-.. cfunction:: PyObject* PyEval_GetLocals()
+.. c:function:: PyObject* PyEval_GetLocals()
 
    Return a dictionary of the local variables in the current execution frame,
    or *NULL* if no frame is currently executing.
 
 
-.. cfunction:: PyObject* PyEval_GetGlobals()
+.. c:function:: PyObject* PyEval_GetGlobals()
 
    Return a dictionary of the global variables in the current execution frame,
    or *NULL* if no frame is currently executing.
 
 
-.. cfunction:: PyFrameObject* PyEval_GetFrame()
+.. c:function:: PyFrameObject* PyEval_GetFrame()
 
    Return the current thread state's frame, which is *NULL* if no frame is
    currently executing.
 
 
-.. cfunction:: int PyFrame_GetLineNumber(PyFrameObject *frame)
+.. c:function:: int PyFrame_GetLineNumber(PyFrameObject *frame)
 
    Return the line number that *frame* is currently executing.
 
 
-.. cfunction:: int PyEval_GetRestricted()
+.. c:function:: int PyEval_GetRestricted()
 
    If there is a current frame and it is executing in restricted mode, return true,
    otherwise false.
 
 
-.. cfunction:: const char* PyEval_GetFuncName(PyObject *func)
+.. c:function:: const char* PyEval_GetFuncName(PyObject *func)
 
    Return the name of *func* if it is a function, class or instance object, else the
    name of *func*\s type.
 
 
-.. cfunction:: const char* PyEval_GetFuncDesc(PyObject *func)
+.. c:function:: const char* PyEval_GetFuncDesc(PyObject *func)
 
    Return a description string, depending on the type of *func*.
    Return values include "()" for functions and methods, " constructor",
    " instance", and " object".  Concatenated with the result of
-   :cfunc:`PyEval_GetFuncName`, the result will be a description of
+   :c:func:`PyEval_GetFuncName`, the result will be a description of
    *func*.
diff --git a/Doc/c-api/sequence.rst b/Doc/c-api/sequence.rst
index 25feac0..2b668a5 100644
--- a/Doc/c-api/sequence.rst
+++ b/Doc/c-api/sequence.rst
@@ -6,13 +6,13 @@
 =================
 
 
-.. cfunction:: int PySequence_Check(PyObject *o)
+.. c:function:: int PySequence_Check(PyObject *o)
 
    Return ``1`` if the object provides sequence protocol, and ``0`` otherwise.
    This function always succeeds.
 
 
-.. cfunction:: Py_ssize_t PySequence_Size(PyObject *o)
+.. c:function:: Py_ssize_t PySequence_Size(PyObject *o)
                Py_ssize_t PySequence_Length(PyObject *o)
 
    .. index:: builtin: len
@@ -22,140 +22,140 @@
    Python expression ``len(o)``.
 
    .. versionchanged:: 2.5
-      These functions returned an :ctype:`int` type. This might require
+      These functions returned an :c:type:`int` type. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PySequence_Concat(PyObject *o1, PyObject *o2)
+.. c:function:: PyObject* PySequence_Concat(PyObject *o1, PyObject *o2)
 
    Return the concatenation of *o1* and *o2* on success, and *NULL* on failure.
    This is the equivalent of the Python expression ``o1 + o2``.
 
 
-.. cfunction:: PyObject* PySequence_Repeat(PyObject *o, Py_ssize_t count)
+.. c:function:: PyObject* PySequence_Repeat(PyObject *o, Py_ssize_t count)
 
    Return the result of repeating sequence object *o* *count* times, or *NULL* on
    failure.  This is the equivalent of the Python expression ``o * count``.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *count*. This might require
+      This function used an :c:type:`int` type for *count*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PySequence_InPlaceConcat(PyObject *o1, PyObject *o2)
+.. c:function:: PyObject* PySequence_InPlaceConcat(PyObject *o1, PyObject *o2)
 
    Return the concatenation of *o1* and *o2* on success, and *NULL* on failure.
    The operation is done *in-place* when *o1* supports it.  This is the equivalent
    of the Python expression ``o1 += o2``.
 
 
-.. cfunction:: PyObject* PySequence_InPlaceRepeat(PyObject *o, Py_ssize_t count)
+.. c:function:: PyObject* PySequence_InPlaceRepeat(PyObject *o, Py_ssize_t count)
 
    Return the result of repeating sequence object *o* *count* times, or *NULL* on
    failure.  The operation is done *in-place* when *o* supports it.  This is the
    equivalent of the Python expression ``o *= count``.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *count*. This might require
+      This function used an :c:type:`int` type for *count*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PySequence_GetItem(PyObject *o, Py_ssize_t i)
+.. c:function:: PyObject* PySequence_GetItem(PyObject *o, Py_ssize_t i)
 
    Return the *i*\ th element of *o*, or *NULL* on failure. This is the equivalent of
    the Python expression ``o[i]``.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *i*. This might require
+      This function used an :c:type:`int` type for *i*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PySequence_GetSlice(PyObject *o, Py_ssize_t i1, Py_ssize_t i2)
+.. c:function:: PyObject* PySequence_GetSlice(PyObject *o, Py_ssize_t i1, Py_ssize_t i2)
 
    Return the slice of sequence object *o* between *i1* and *i2*, or *NULL* on
    failure. This is the equivalent of the Python expression ``o[i1:i2]``.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *i1* and *i2*. This might
+      This function used an :c:type:`int` type for *i1* and *i2*. This might
       require changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: int PySequence_SetItem(PyObject *o, Py_ssize_t i, PyObject *v)
+.. c:function:: int PySequence_SetItem(PyObject *o, Py_ssize_t i, PyObject *v)
 
    Assign object *v* to the *i*\ th element of *o*.  Returns ``-1`` on failure.  This
    is the equivalent of the Python statement ``o[i] = v``.  This function *does
    not* steal a reference to *v*.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *i*. This might require
+      This function used an :c:type:`int` type for *i*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: int PySequence_DelItem(PyObject *o, Py_ssize_t i)
+.. c:function:: int PySequence_DelItem(PyObject *o, Py_ssize_t i)
 
    Delete the *i*\ th element of object *o*.  Returns ``-1`` on failure.  This is the
    equivalent of the Python statement ``del o[i]``.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *i*. This might require
+      This function used an :c:type:`int` type for *i*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: int PySequence_SetSlice(PyObject *o, Py_ssize_t i1, Py_ssize_t i2, PyObject *v)
+.. c:function:: int PySequence_SetSlice(PyObject *o, Py_ssize_t i1, Py_ssize_t i2, PyObject *v)
 
    Assign the sequence object *v* to the slice in sequence object *o* from *i1* to
    *i2*.  This is the equivalent of the Python statement ``o[i1:i2] = v``.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *i1* and *i2*. This might
+      This function used an :c:type:`int` type for *i1* and *i2*. This might
       require changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: int PySequence_DelSlice(PyObject *o, Py_ssize_t i1, Py_ssize_t i2)
+.. c:function:: int PySequence_DelSlice(PyObject *o, Py_ssize_t i1, Py_ssize_t i2)
 
    Delete the slice in sequence object *o* from *i1* to *i2*.  Returns ``-1`` on
    failure.  This is the equivalent of the Python statement ``del o[i1:i2]``.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *i1* and *i2*. This might
+      This function used an :c:type:`int` type for *i1* and *i2*. This might
       require changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: Py_ssize_t PySequence_Count(PyObject *o, PyObject *value)
+.. c:function:: Py_ssize_t PySequence_Count(PyObject *o, PyObject *value)
 
    Return the number of occurrences of *value* in *o*, that is, return the number
    of keys for which ``o[key] == value``.  On failure, return ``-1``.  This is
    equivalent to the Python expression ``o.count(value)``.
 
    .. versionchanged:: 2.5
-      This function returned an :ctype:`int` type. This might require changes
+      This function returned an :c:type:`int` type. This might require changes
       in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: int PySequence_Contains(PyObject *o, PyObject *value)
+.. c:function:: int PySequence_Contains(PyObject *o, PyObject *value)
 
    Determine if *o* contains *value*.  If an item in *o* is equal to *value*,
    return ``1``, otherwise return ``0``. On error, return ``-1``.  This is
    equivalent to the Python expression ``value in o``.
 
 
-.. cfunction:: Py_ssize_t PySequence_Index(PyObject *o, PyObject *value)
+.. c:function:: Py_ssize_t PySequence_Index(PyObject *o, PyObject *value)
 
    Return the first index *i* for which ``o[i] == value``.  On error, return
    ``-1``.    This is equivalent to the Python expression ``o.index(value)``.
 
    .. versionchanged:: 2.5
-      This function returned an :ctype:`int` type. This might require changes
+      This function returned an :c:type:`int` type. This might require changes
       in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PySequence_List(PyObject *o)
+.. c:function:: PyObject* PySequence_List(PyObject *o)
 
    Return a list object with the same contents as the arbitrary sequence *o*.  The
    returned list is guaranteed to be new.
 
 
-.. cfunction:: PyObject* PySequence_Tuple(PyObject *o)
+.. c:function:: PyObject* PySequence_Tuple(PyObject *o)
 
    .. index:: builtin: tuple
 
@@ -165,28 +165,28 @@
    equivalent to the Python expression ``tuple(o)``.
 
 
-.. cfunction:: PyObject* PySequence_Fast(PyObject *o, const char *m)
+.. c:function:: PyObject* PySequence_Fast(PyObject *o, const char *m)
 
    Returns the sequence *o* as a tuple, unless it is already a tuple or list, in
-   which case *o* is returned.  Use :cfunc:`PySequence_Fast_GET_ITEM` to access the
+   which case *o* is returned.  Use :c:func:`PySequence_Fast_GET_ITEM` to access the
    members of the result.  Returns *NULL* on failure.  If the object is not a
    sequence, raises :exc:`TypeError` with *m* as the message text.
 
 
-.. cfunction:: PyObject* PySequence_Fast_GET_ITEM(PyObject *o, Py_ssize_t i)
+.. c:function:: PyObject* PySequence_Fast_GET_ITEM(PyObject *o, Py_ssize_t i)
 
    Return the *i*\ th element of *o*, assuming that *o* was returned by
-   :cfunc:`PySequence_Fast`, *o* is not *NULL*, and that *i* is within bounds.
+   :c:func:`PySequence_Fast`, *o* is not *NULL*, and that *i* is within bounds.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *i*. This might require
+      This function used an :c:type:`int` type for *i*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject** PySequence_Fast_ITEMS(PyObject *o)
+.. c:function:: PyObject** PySequence_Fast_ITEMS(PyObject *o)
 
    Return the underlying array of PyObject pointers.  Assumes that *o* was returned
-   by :cfunc:`PySequence_Fast` and *o* is not *NULL*.
+   by :c:func:`PySequence_Fast` and *o* is not *NULL*.
 
    Note, if a list gets resized, the reallocation may relocate the items array.
    So, only use the underlying array pointer in contexts where the sequence
@@ -195,24 +195,24 @@
    .. versionadded:: 2.4
 
 
-.. cfunction:: PyObject* PySequence_ITEM(PyObject *o, Py_ssize_t i)
+.. c:function:: PyObject* PySequence_ITEM(PyObject *o, Py_ssize_t i)
 
    Return the *i*\ th element of *o* or *NULL* on failure. Macro form of
-   :cfunc:`PySequence_GetItem` but without checking that
-   :cfunc:`PySequence_Check` on *o* is true and without adjustment for negative
+   :c:func:`PySequence_GetItem` but without checking that
+   :c:func:`PySequence_Check` on *o* is true and without adjustment for negative
    indices.
 
    .. versionadded:: 2.3
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *i*. This might require
+      This function used an :c:type:`int` type for *i*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: Py_ssize_t PySequence_Fast_GET_SIZE(PyObject *o)
+.. c:function:: Py_ssize_t PySequence_Fast_GET_SIZE(PyObject *o)
 
    Returns the length of *o*, assuming that *o* was returned by
-   :cfunc:`PySequence_Fast` and that *o* is not *NULL*.  The size can also be
-   gotten by calling :cfunc:`PySequence_Size` on *o*, but
-   :cfunc:`PySequence_Fast_GET_SIZE` is faster because it can assume *o* is a list
+   :c:func:`PySequence_Fast` and that *o* is not *NULL*.  The size can also be
+   gotten by calling :c:func:`PySequence_Size` on *o*, but
+   :c:func:`PySequence_Fast_GET_SIZE` is faster because it can assume *o* is a list
    or tuple.
diff --git a/Doc/c-api/set.rst b/Doc/c-api/set.rst
index 4bac96b..41c4af4 100644
--- a/Doc/c-api/set.rst
+++ b/Doc/c-api/set.rst
@@ -16,20 +16,20 @@
 
 This section details the public API for :class:`set` and :class:`frozenset`
 objects.  Any functionality not listed below is best accessed using the either
-the abstract object protocol (including :cfunc:`PyObject_CallMethod`,
-:cfunc:`PyObject_RichCompareBool`, :cfunc:`PyObject_Hash`,
-:cfunc:`PyObject_Repr`, :cfunc:`PyObject_IsTrue`, :cfunc:`PyObject_Print`, and
-:cfunc:`PyObject_GetIter`) or the abstract number protocol (including
-:cfunc:`PyNumber_And`, :cfunc:`PyNumber_Subtract`, :cfunc:`PyNumber_Or`,
-:cfunc:`PyNumber_Xor`, :cfunc:`PyNumber_InPlaceAnd`,
-:cfunc:`PyNumber_InPlaceSubtract`, :cfunc:`PyNumber_InPlaceOr`, and
-:cfunc:`PyNumber_InPlaceXor`).
+the abstract object protocol (including :c:func:`PyObject_CallMethod`,
+:c:func:`PyObject_RichCompareBool`, :c:func:`PyObject_Hash`,
+:c:func:`PyObject_Repr`, :c:func:`PyObject_IsTrue`, :c:func:`PyObject_Print`, and
+:c:func:`PyObject_GetIter`) or the abstract number protocol (including
+:c:func:`PyNumber_And`, :c:func:`PyNumber_Subtract`, :c:func:`PyNumber_Or`,
+:c:func:`PyNumber_Xor`, :c:func:`PyNumber_InPlaceAnd`,
+:c:func:`PyNumber_InPlaceSubtract`, :c:func:`PyNumber_InPlaceOr`, and
+:c:func:`PyNumber_InPlaceXor`).
 
 
-.. ctype:: PySetObject
+.. c:type:: PySetObject
 
-   This subtype of :ctype:`PyObject` is used to hold the internal data for both
-   :class:`set` and :class:`frozenset` objects.  It is like a :ctype:`PyDictObject`
+   This subtype of :c:type:`PyObject` is used to hold the internal data for both
+   :class:`set` and :class:`frozenset` objects.  It is like a :c:type:`PyDictObject`
    in that it is a fixed size for small sets (much like tuple storage) and will
    point to a separate, variable sized block of memory for medium and large sized
    sets (much like list storage). None of the fields of this structure should be
@@ -37,53 +37,53 @@
    the documented API rather than by manipulating the values in the structure.
 
 
-.. cvar:: PyTypeObject PySet_Type
+.. c:var:: PyTypeObject PySet_Type
 
-   This is an instance of :ctype:`PyTypeObject` representing the Python
+   This is an instance of :c:type:`PyTypeObject` representing the Python
    :class:`set` type.
 
 
-.. cvar:: PyTypeObject PyFrozenSet_Type
+.. c:var:: PyTypeObject PyFrozenSet_Type
 
-   This is an instance of :ctype:`PyTypeObject` representing the Python
+   This is an instance of :c:type:`PyTypeObject` representing the Python
    :class:`frozenset` type.
 
 The following type check macros work on pointers to any Python object. Likewise,
 the constructor functions work with any iterable Python object.
 
 
-.. cfunction:: int PySet_Check(PyObject *p)
+.. c:function:: int PySet_Check(PyObject *p)
 
    Return true if *p* is a :class:`set` object or an instance of a subtype.
 
    .. versionadded:: 2.6
 
-.. cfunction:: int PyFrozenSet_Check(PyObject *p)
+.. c:function:: int PyFrozenSet_Check(PyObject *p)
 
    Return true if *p* is a :class:`frozenset` object or an instance of a
    subtype.
 
    .. versionadded:: 2.6
 
-.. cfunction:: int PyAnySet_Check(PyObject *p)
+.. c:function:: int PyAnySet_Check(PyObject *p)
 
    Return true if *p* is a :class:`set` object, a :class:`frozenset` object, or an
    instance of a subtype.
 
 
-.. cfunction:: int PyAnySet_CheckExact(PyObject *p)
+.. c:function:: int PyAnySet_CheckExact(PyObject *p)
 
    Return true if *p* is a :class:`set` object or a :class:`frozenset` object but
    not an instance of a subtype.
 
 
-.. cfunction:: int PyFrozenSet_CheckExact(PyObject *p)
+.. c:function:: int PyFrozenSet_CheckExact(PyObject *p)
 
    Return true if *p* is a :class:`frozenset` object but not an instance of a
    subtype.
 
 
-.. cfunction:: PyObject* PySet_New(PyObject *iterable)
+.. c:function:: PyObject* PySet_New(PyObject *iterable)
 
    Return a new :class:`set` containing objects returned by the *iterable*.  The
    *iterable* may be *NULL* to create a new empty set.  Return the new set on
@@ -92,7 +92,7 @@
    (``c=set(s)``).
 
 
-.. cfunction:: PyObject* PyFrozenSet_New(PyObject *iterable)
+.. c:function:: PyObject* PyFrozenSet_New(PyObject *iterable)
 
    Return a new :class:`frozenset` containing objects returned by the *iterable*.
    The *iterable* may be *NULL* to create a new empty frozenset.  Return the new
@@ -108,7 +108,7 @@
 or :class:`frozenset` or instances of their subtypes.
 
 
-.. cfunction:: Py_ssize_t PySet_Size(PyObject *anyset)
+.. c:function:: Py_ssize_t PySet_Size(PyObject *anyset)
 
    .. index:: builtin: len
 
@@ -117,16 +117,16 @@
    :class:`set`, :class:`frozenset`, or an instance of a subtype.
 
    .. versionchanged:: 2.5
-      This function returned an :ctype:`int`. This might require changes in
+      This function returned an :c:type:`int`. This might require changes in
       your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: Py_ssize_t PySet_GET_SIZE(PyObject *anyset)
+.. c:function:: Py_ssize_t PySet_GET_SIZE(PyObject *anyset)
 
-   Macro form of :cfunc:`PySet_Size` without error checking.
+   Macro form of :c:func:`PySet_Size` without error checking.
 
 
-.. cfunction:: int PySet_Contains(PyObject *anyset, PyObject *key)
+.. c:function:: int PySet_Contains(PyObject *anyset, PyObject *key)
 
    Return 1 if found, 0 if not found, and -1 if an error is encountered.  Unlike
    the Python :meth:`__contains__` method, this function does not automatically
@@ -135,7 +135,7 @@
    :class:`set`, :class:`frozenset`, or an instance of a subtype.
 
 
-.. cfunction:: int PySet_Add(PyObject *set, PyObject *key)
+.. c:function:: int PySet_Add(PyObject *set, PyObject *key)
 
    Add *key* to a :class:`set` instance.  Does not apply to :class:`frozenset`
    instances.  Return 0 on success or -1 on failure. Raise a :exc:`TypeError` if
@@ -145,14 +145,14 @@
 
    .. versionchanged:: 2.6
       Now works with instances of :class:`frozenset` or its subtypes.
-      Like :cfunc:`PyTuple_SetItem` in that it can be used to fill-in the
+      Like :c:func:`PyTuple_SetItem` in that it can be used to fill-in the
       values of brand new frozensets before they are exposed to other code.
 
 The following functions are available for instances of :class:`set` or its
 subtypes but not for instances of :class:`frozenset` or its subtypes.
 
 
-.. cfunction:: int PySet_Discard(PyObject *set, PyObject *key)
+.. c:function:: int PySet_Discard(PyObject *set, PyObject *key)
 
    Return 1 if found and removed, 0 if not found (no action taken), and -1 if an
    error is encountered.  Does not raise :exc:`KeyError` for missing keys.  Raise a
@@ -162,7 +162,7 @@
    instance of :class:`set` or its subtype.
 
 
-.. cfunction:: PyObject* PySet_Pop(PyObject *set)
+.. c:function:: PyObject* PySet_Pop(PyObject *set)
 
    Return a new reference to an arbitrary object in the *set*, and removes the
    object from the *set*.  Return *NULL* on failure.  Raise :exc:`KeyError` if the
@@ -170,6 +170,6 @@
    :class:`set` or its subtype.
 
 
-.. cfunction:: int PySet_Clear(PyObject *set)
+.. c:function:: int PySet_Clear(PyObject *set)
 
    Empty an existing set of all elements.
diff --git a/Doc/c-api/slice.rst b/Doc/c-api/slice.rst
index 14c1d49..f74230a 100644
--- a/Doc/c-api/slice.rst
+++ b/Doc/c-api/slice.rst
@@ -6,7 +6,7 @@
 -------------
 
 
-.. cvar:: PyTypeObject PySlice_Type
+.. c:var:: PyTypeObject PySlice_Type
 
    .. index:: single: SliceType (in module types)
 
@@ -14,12 +14,12 @@
    ``types.SliceType``.
 
 
-.. cfunction:: int PySlice_Check(PyObject *ob)
+.. c:function:: int PySlice_Check(PyObject *ob)
 
    Return true if *ob* is a slice object; *ob* must not be *NULL*.
 
 
-.. cfunction:: PyObject* PySlice_New(PyObject *start, PyObject *stop, PyObject *step)
+.. c:function:: PyObject* PySlice_New(PyObject *start, PyObject *stop, PyObject *step)
 
    Return a new slice object with the given values.  The *start*, *stop*, and
    *step* parameters are used as the values of the slice object attributes of
@@ -28,7 +28,7 @@
    the new object could not be allocated.
 
 
-.. cfunction:: int PySlice_GetIndices(PySliceObject *slice, Py_ssize_t length, Py_ssize_t *start, Py_ssize_t *stop, Py_ssize_t *step)
+.. c:function:: int PySlice_GetIndices(PySliceObject *slice, Py_ssize_t length, Py_ssize_t *start, Py_ssize_t *stop, Py_ssize_t *step)
 
    Retrieve the start, stop and step indices from the slice object *slice*,
    assuming a sequence of length *length*. Treats indices greater than
@@ -40,18 +40,18 @@
 
    You probably do not want to use this function.  If you want to use slice
    objects in versions of Python prior to 2.3, you would probably do well to
-   incorporate the source of :cfunc:`PySlice_GetIndicesEx`, suitably renamed,
+   incorporate the source of :c:func:`PySlice_GetIndicesEx`, suitably renamed,
    in the source of your extension.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *length* and an
-      :ctype:`int *` type for *start*, *stop*, and *step*. This might require
+      This function used an :c:type:`int` type for *length* and an
+      :c:type:`int *` type for *start*, *stop*, and *step*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: int PySlice_GetIndicesEx(PySliceObject *slice, Py_ssize_t length, Py_ssize_t *start, Py_ssize_t *stop, Py_ssize_t *step, Py_ssize_t *slicelength)
+.. c:function:: int PySlice_GetIndicesEx(PySliceObject *slice, Py_ssize_t length, Py_ssize_t *start, Py_ssize_t *stop, Py_ssize_t *step, Py_ssize_t *slicelength)
 
-   Usable replacement for :cfunc:`PySlice_GetIndices`.  Retrieve the start,
+   Usable replacement for :c:func:`PySlice_GetIndices`.  Retrieve the start,
    stop, and step indices from the slice object *slice* assuming a sequence of
    length *length*, and store the length of the slice in *slicelength*.  Out
    of bounds indices are clipped in a manner consistent with the handling of
@@ -62,7 +62,7 @@
    .. versionadded:: 2.3
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *length* and an
-      :ctype:`int *` type for *start*, *stop*, *step*, and *slicelength*. This
+      This function used an :c:type:`int` type for *length* and an
+      :c:type:`int *` type for *start*, *stop*, *step*, and *slicelength*. This
       might require changes in your code for properly supporting 64-bit
       systems.
diff --git a/Doc/c-api/string.rst b/Doc/c-api/string.rst
index 9b95859..ecf7050 100644
--- a/Doc/c-api/string.rst
+++ b/Doc/c-api/string.rst
@@ -17,20 +17,20 @@
 .. index:: object: string
 
 
-.. ctype:: PyStringObject
+.. c:type:: PyStringObject
 
-   This subtype of :ctype:`PyObject` represents a Python string object.
+   This subtype of :c:type:`PyObject` represents a Python string object.
 
 
-.. cvar:: PyTypeObject PyString_Type
+.. c:var:: PyTypeObject PyString_Type
 
    .. index:: single: StringType (in module types)
 
-   This instance of :ctype:`PyTypeObject` represents the Python string type; it is
+   This instance of :c:type:`PyTypeObject` represents the Python string type; it is
    the same object as ``str`` and ``types.StringType`` in the Python layer. .
 
 
-.. cfunction:: int PyString_Check(PyObject *o)
+.. c:function:: int PyString_Check(PyObject *o)
 
    Return true if the object *o* is a string object or an instance of a subtype of
    the string type.
@@ -39,7 +39,7 @@
       Allowed subtypes to be accepted.
 
 
-.. cfunction:: int PyString_CheckExact(PyObject *o)
+.. c:function:: int PyString_CheckExact(PyObject *o)
 
    Return true if the object *o* is a string object, but not an instance of a
    subtype of the string type.
@@ -47,27 +47,27 @@
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyObject* PyString_FromString(const char *v)
+.. c:function:: PyObject* PyString_FromString(const char *v)
 
    Return a new string object with a copy of the string *v* as value on success,
    and *NULL* on failure.  The parameter *v* must not be *NULL*; it will not be
    checked.
 
 
-.. cfunction:: PyObject* PyString_FromStringAndSize(const char *v, Py_ssize_t len)
+.. c:function:: PyObject* PyString_FromStringAndSize(const char *v, Py_ssize_t len)
 
    Return a new string object with a copy of the string *v* as value and length
    *len* on success, and *NULL* on failure.  If *v* is *NULL*, the contents of the
    string are uninitialized.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *len*. This might require
+      This function used an :c:type:`int` type for *len*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyString_FromFormat(const char *format, ...)
+.. c:function:: PyObject* PyString_FromFormat(const char *format, ...)
 
-   Take a C :cfunc:`printf`\ -style *format* string and a variable number of
+   Take a C :c:func:`printf`\ -style *format* string and a variable number of
    arguments, calculate the size of the resulting Python string and return a string
    with the values formatted into it.  The variable arguments must be C types and
    must correspond exactly to the format characters in the *format* string.  The
@@ -144,31 +144,31 @@
       Support for `"%lld"` and `"%llu"` added.
 
 
-.. cfunction:: PyObject* PyString_FromFormatV(const char *format, va_list vargs)
+.. c:function:: PyObject* PyString_FromFormatV(const char *format, va_list vargs)
 
-   Identical to :cfunc:`PyString_FromFormat` except that it takes exactly two
+   Identical to :c:func:`PyString_FromFormat` except that it takes exactly two
    arguments.
 
 
-.. cfunction:: Py_ssize_t PyString_Size(PyObject *string)
+.. c:function:: Py_ssize_t PyString_Size(PyObject *string)
 
    Return the length of the string in string object *string*.
 
    .. versionchanged:: 2.5
-      This function returned an :ctype:`int` type. This might require changes
+      This function returned an :c:type:`int` type. This might require changes
       in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: Py_ssize_t PyString_GET_SIZE(PyObject *string)
+.. c:function:: Py_ssize_t PyString_GET_SIZE(PyObject *string)
 
-   Macro form of :cfunc:`PyString_Size` but without error checking.
+   Macro form of :c:func:`PyString_Size` but without error checking.
 
    .. versionchanged:: 2.5
-      This macro returned an :ctype:`int` type. This might require changes in
+      This macro returned an :c:type:`int` type. This might require changes in
       your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: char* PyString_AsString(PyObject *string)
+.. c:function:: char* PyString_AsString(PyObject *string)
 
    Return a NUL-terminated representation of the contents of *string*.  The pointer
    refers to the internal buffer of *string*, not a copy.  The data must not be
@@ -176,16 +176,16 @@
    ``PyString_FromStringAndSize(NULL, size)``. It must not be deallocated.  If
    *string* is a Unicode object, this function computes the default encoding of
    *string* and operates on that.  If *string* is not a string object at all,
-   :cfunc:`PyString_AsString` returns *NULL* and raises :exc:`TypeError`.
+   :c:func:`PyString_AsString` returns *NULL* and raises :exc:`TypeError`.
 
 
-.. cfunction:: char* PyString_AS_STRING(PyObject *string)
+.. c:function:: char* PyString_AS_STRING(PyObject *string)
 
-   Macro form of :cfunc:`PyString_AsString` but without error checking.  Only
+   Macro form of :c:func:`PyString_AsString` but without error checking.  Only
    string objects are supported; no Unicode objects should be passed.
 
 
-.. cfunction:: int PyString_AsStringAndSize(PyObject *obj, char **buffer, Py_ssize_t *length)
+.. c:function:: int PyString_AsStringAndSize(PyObject *obj, char **buffer, Py_ssize_t *length)
 
    Return a NUL-terminated representation of the contents of the object *obj*
    through the output variables *buffer* and *length*.
@@ -200,14 +200,14 @@
    ``PyString_FromStringAndSize(NULL, size)``.  It must not be deallocated.  If
    *string* is a Unicode object, this function computes the default encoding of
    *string* and operates on that.  If *string* is not a string object at all,
-   :cfunc:`PyString_AsStringAndSize` returns ``-1`` and raises :exc:`TypeError`.
+   :c:func:`PyString_AsStringAndSize` returns ``-1`` and raises :exc:`TypeError`.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int *` type for *length*. This might
+      This function used an :c:type:`int *` type for *length*. This might
       require changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: void PyString_Concat(PyObject **string, PyObject *newpart)
+.. c:function:: void PyString_Concat(PyObject **string, PyObject *newpart)
 
    Create a new string object in *\*string* containing the contents of *newpart*
    appended to *string*; the caller will own the new reference.  The reference to
@@ -216,13 +216,13 @@
    *\*string* will be set to *NULL*; the appropriate exception will be set.
 
 
-.. cfunction:: void PyString_ConcatAndDel(PyObject **string, PyObject *newpart)
+.. c:function:: void PyString_ConcatAndDel(PyObject **string, PyObject *newpart)
 
    Create a new string object in *\*string* containing the contents of *newpart*
    appended to *string*.  This version decrements the reference count of *newpart*.
 
 
-.. cfunction:: int _PyString_Resize(PyObject **string, Py_ssize_t newsize)
+.. c:function:: int _PyString_Resize(PyObject **string, Py_ssize_t newsize)
 
    A way to resize a string object even though it is "immutable". Only use this to
    build up a brand new string object; don't use this if the string may already be
@@ -235,16 +235,16 @@
    set to *NULL*, a memory exception is set, and ``-1`` is returned.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *newsize*. This might
+      This function used an :c:type:`int` type for *newsize*. This might
       require changes in your code for properly supporting 64-bit systems.
 
-.. cfunction:: PyObject* PyString_Format(PyObject *format, PyObject *args)
+.. c:function:: PyObject* PyString_Format(PyObject *format, PyObject *args)
 
    Return a new string object from *format* and *args*. Analogous to ``format %
    args``.  The *args* argument must be a tuple.
 
 
-.. cfunction:: void PyString_InternInPlace(PyObject **string)
+.. c:function:: void PyString_InternInPlace(PyObject **string)
 
    Intern the argument *\*string* in place.  The argument must be the address of a
    pointer variable pointing to a Python string object.  If there is an existing
@@ -261,10 +261,10 @@
       This function is not available in 3.x and does not have a PyBytes alias.
 
 
-.. cfunction:: PyObject* PyString_InternFromString(const char *v)
+.. c:function:: PyObject* PyString_InternFromString(const char *v)
 
-   A combination of :cfunc:`PyString_FromString` and
-   :cfunc:`PyString_InternInPlace`, returning either a new string object that has
+   A combination of :c:func:`PyString_FromString` and
+   :c:func:`PyString_InternInPlace`, returning either a new string object that has
    been interned, or a new ("owned") reference to an earlier interned string object
    with the same value.
 
@@ -273,7 +273,7 @@
       This function is not available in 3.x and does not have a PyBytes alias.
 
 
-.. cfunction:: PyObject* PyString_Decode(const char *s, Py_ssize_t size, const char *encoding, const char *errors)
+.. c:function:: PyObject* PyString_Decode(const char *s, Py_ssize_t size, const char *encoding, const char *errors)
 
    Create an object by decoding *size* bytes of the encoded buffer *s* using the
    codec registered for *encoding*.  *encoding* and *errors* have the same meaning
@@ -286,11 +286,11 @@
       This function is not available in 3.x and does not have a PyBytes alias.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyString_AsDecodedObject(PyObject *str, const char *encoding, const char *errors)
+.. c:function:: PyObject* PyString_AsDecodedObject(PyObject *str, const char *encoding, const char *errors)
 
    Decode a string object by passing it to the codec registered for *encoding* and
    return the result as Python object. *encoding* and *errors* have the same
@@ -303,9 +303,9 @@
       This function is not available in 3.x and does not have a PyBytes alias.
 
 
-.. cfunction:: PyObject* PyString_Encode(const char *s, Py_ssize_t size, const char *encoding, const char *errors)
+.. c:function:: PyObject* PyString_Encode(const char *s, Py_ssize_t size, const char *encoding, const char *errors)
 
-   Encode the :ctype:`char` buffer of the given size by passing it to the codec
+   Encode the :c:type:`char` buffer of the given size by passing it to the codec
    registered for *encoding* and return a Python object. *encoding* and *errors*
    have the same meaning as the parameters of the same name in the string
    :meth:`encode` method. The codec to be used is looked up using the Python codec
@@ -316,11 +316,11 @@
       This function is not available in 3.x and does not have a PyBytes alias.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyString_AsEncodedObject(PyObject *str, const char *encoding, const char *errors)
+.. c:function:: PyObject* PyString_AsEncodedObject(PyObject *str, const char *encoding, const char *errors)
 
    Encode a string object using the codec registered for *encoding* and return the
    result as Python object. *encoding* and *errors* have the same meaning as the
diff --git a/Doc/c-api/structures.rst b/Doc/c-api/structures.rst
index 5be88ac..f5007ac 100644
--- a/Doc/c-api/structures.rst
+++ b/Doc/c-api/structures.rst
@@ -11,12 +11,12 @@
 
 All Python objects ultimately share a small number of fields at the beginning
 of the object's representation in memory.  These are represented by the
-:ctype:`PyObject` and :ctype:`PyVarObject` types, which are defined, in turn,
+:c:type:`PyObject` and :c:type:`PyVarObject` types, which are defined, in turn,
 by the expansions of some macros also used, whether directly or indirectly, in
 the definition of all other Python objects.
 
 
-.. ctype:: PyObject
+.. c:type:: PyObject
 
    All object types are extensions of this type.  This is a type which
    contains the information Python needs to treat a pointer to an object as an
@@ -26,79 +26,79 @@
    macro.
 
 
-.. ctype:: PyVarObject
+.. c:type:: PyVarObject
 
-   This is an extension of :ctype:`PyObject` that adds the :attr:`ob_size`
+   This is an extension of :c:type:`PyObject` that adds the :attr:`ob_size`
    field.  This is only used for objects that have some notion of *length*.
    This type does not often appear in the Python/C API.  It corresponds to the
    fields defined by the expansion of the ``PyObject_VAR_HEAD`` macro.
 
-These macros are used in the definition of :ctype:`PyObject` and
-:ctype:`PyVarObject`:
+These macros are used in the definition of :c:type:`PyObject` and
+:c:type:`PyVarObject`:
 
 
-.. cmacro:: PyObject_HEAD
+.. c:macro:: PyObject_HEAD
 
    This is a macro which expands to the declarations of the fields of the
-   :ctype:`PyObject` type; it is used when declaring new types which represent
+   :c:type:`PyObject` type; it is used when declaring new types which represent
    objects without a varying length.  The specific fields it expands to depend
-   on the definition of :cmacro:`Py_TRACE_REFS`.  By default, that macro is
-   not defined, and :cmacro:`PyObject_HEAD` expands to::
+   on the definition of :c:macro:`Py_TRACE_REFS`.  By default, that macro is
+   not defined, and :c:macro:`PyObject_HEAD` expands to::
 
       Py_ssize_t ob_refcnt;
       PyTypeObject *ob_type;
 
-   When :cmacro:`Py_TRACE_REFS` is defined, it expands to::
+   When :c:macro:`Py_TRACE_REFS` is defined, it expands to::
 
       PyObject *_ob_next, *_ob_prev;
       Py_ssize_t ob_refcnt;
       PyTypeObject *ob_type;
 
 
-.. cmacro:: PyObject_VAR_HEAD
+.. c:macro:: PyObject_VAR_HEAD
 
    This is a macro which expands to the declarations of the fields of the
-   :ctype:`PyVarObject` type; it is used when declaring new types which
+   :c:type:`PyVarObject` type; it is used when declaring new types which
    represent objects with a length that varies from instance to instance.
    This macro always expands to::
 
       PyObject_HEAD
       Py_ssize_t ob_size;
 
-   Note that :cmacro:`PyObject_HEAD` is part of the expansion, and that its own
-   expansion varies depending on the definition of :cmacro:`Py_TRACE_REFS`.
+   Note that :c:macro:`PyObject_HEAD` is part of the expansion, and that its own
+   expansion varies depending on the definition of :c:macro:`Py_TRACE_REFS`.
 
 
-.. cmacro:: PyObject_HEAD_INIT(type)
+.. c:macro:: PyObject_HEAD_INIT(type)
 
    This is a macro which expands to initialization values for a new
-   :ctype:`PyObject` type.  This macro expands to::
+   :c:type:`PyObject` type.  This macro expands to::
 
       _PyObject_EXTRA_INIT
       1, type,
 
 
-.. cmacro:: PyVarObject_HEAD_INIT(type, size)
+.. c:macro:: PyVarObject_HEAD_INIT(type, size)
 
    This is a macro which expands to initialization values for a new
-   :ctype:`PyVarObject` type, including the :attr:`ob_size` field.
+   :c:type:`PyVarObject` type, including the :attr:`ob_size` field.
    This macro expands to::
 
       _PyObject_EXTRA_INIT
       1, type, size,
 
 
-.. ctype:: PyCFunction
+.. c:type:: PyCFunction
 
    Type of the functions used to implement most Python callables in C.
-   Functions of this type take two :ctype:`PyObject\*` parameters and return
+   Functions of this type take two :c:type:`PyObject\*` parameters and return
    one such value.  If the return value is *NULL*, an exception shall have
    been set.  If not *NULL*, the return value is interpreted as the return
    value of the function as exposed in Python.  The function must return a new
    reference.
 
 
-.. ctype:: PyMethodDef
+.. c:type:: PyMethodDef
 
    Structure used to describe a method of an extension type.  This structure has
    four fields:
@@ -119,10 +119,10 @@
    +------------------+-------------+-------------------------------+
 
 The :attr:`ml_meth` is a C function pointer.  The functions may be of different
-types, but they always return :ctype:`PyObject\*`.  If the function is not of
-the :ctype:`PyCFunction`, the compiler will require a cast in the method table.
-Even though :ctype:`PyCFunction` defines the first parameter as
-:ctype:`PyObject\*`, it is common that the method implementation uses a the
+types, but they always return :c:type:`PyObject\*`.  If the function is not of
+the :c:type:`PyCFunction`, the compiler will require a cast in the method table.
+Even though :c:type:`PyCFunction` defines the first parameter as
+:c:type:`PyObject\*`, it is common that the method implementation uses a the
 specific C type of the *self* object.
 
 The :attr:`ml_flags` field is a bitfield which can include the following flags.
@@ -136,27 +136,27 @@
 .. data:: METH_VARARGS
 
    This is the typical calling convention, where the methods have the type
-   :ctype:`PyCFunction`. The function expects two :ctype:`PyObject\*` values.
+   :c:type:`PyCFunction`. The function expects two :c:type:`PyObject\*` values.
    The first one is the *self* object for methods; for module functions, it is
    the module object.  The second parameter (often called *args*) is a tuple
    object representing all arguments.  This parameter is typically processed
-   using :cfunc:`PyArg_ParseTuple` or :cfunc:`PyArg_UnpackTuple`.
+   using :c:func:`PyArg_ParseTuple` or :c:func:`PyArg_UnpackTuple`.
 
 
 .. data:: METH_KEYWORDS
 
-   Methods with these flags must be of type :ctype:`PyCFunctionWithKeywords`.
+   Methods with these flags must be of type :c:type:`PyCFunctionWithKeywords`.
    The function expects three parameters: *self*, *args*, and a dictionary of
    all the keyword arguments.  The flag is typically combined with
    :const:`METH_VARARGS`, and the parameters are typically processed using
-   :cfunc:`PyArg_ParseTupleAndKeywords`.
+   :c:func:`PyArg_ParseTupleAndKeywords`.
 
 
 .. data:: METH_NOARGS
 
    Methods without parameters don't need to check whether arguments are given if
    they are listed with the :const:`METH_NOARGS` flag.  They need to be of type
-   :ctype:`PyCFunction`.  The first parameter is typically named ``self`` and
+   :c:type:`PyCFunction`.  The first parameter is typically named ``self`` and
    will hold a reference to the module or object instance.  In all cases the
    second parameter will be *NULL*.
 
@@ -164,15 +164,15 @@
 .. data:: METH_O
 
    Methods with a single object argument can be listed with the :const:`METH_O`
-   flag, instead of invoking :cfunc:`PyArg_ParseTuple` with a ``"O"`` argument.
-   They have the type :ctype:`PyCFunction`, with the *self* parameter, and a
-   :ctype:`PyObject\*` parameter representing the single argument.
+   flag, instead of invoking :c:func:`PyArg_ParseTuple` with a ``"O"`` argument.
+   They have the type :c:type:`PyCFunction`, with the *self* parameter, and a
+   :c:type:`PyObject\*` parameter representing the single argument.
 
 
 .. data:: METH_OLDARGS
 
    This calling convention is deprecated.  The method must be of type
-   :ctype:`PyCFunction`.  The second argument is *NULL* if no arguments are
+   :c:type:`PyCFunction`.  The second argument is *NULL* if no arguments are
    given, a single object if exactly one argument is given, and a tuple of
    objects if more than one argument is given.  There is no way for a function
    using this convention to distinguish between a call with multiple arguments
@@ -225,7 +225,7 @@
    .. versionadded:: 2.4
 
 
-.. ctype:: PyMemberDef
+.. c:type:: PyMemberDef
 
    Structure which describes an attribute of a type which corresponds to a C
    struct member.  Its fields are:
@@ -277,22 +277,22 @@
    T_PYSSIZET      Py_ssize_t
    =============== ==================
 
-   :cmacro:`T_OBJECT` and :cmacro:`T_OBJECT_EX` differ in that
-   :cmacro:`T_OBJECT` returns ``None`` if the member is *NULL* and
-   :cmacro:`T_OBJECT_EX` raises an :exc:`AttributeError`.  Try to use
-   :cmacro:`T_OBJECT_EX` over :cmacro:`T_OBJECT` because :cmacro:`T_OBJECT_EX`
+   :c:macro:`T_OBJECT` and :c:macro:`T_OBJECT_EX` differ in that
+   :c:macro:`T_OBJECT` returns ``None`` if the member is *NULL* and
+   :c:macro:`T_OBJECT_EX` raises an :exc:`AttributeError`.  Try to use
+   :c:macro:`T_OBJECT_EX` over :c:macro:`T_OBJECT` because :c:macro:`T_OBJECT_EX`
    handles use of the :keyword:`del` statement on that attribute more correctly
-   than :cmacro:`T_OBJECT`.
+   than :c:macro:`T_OBJECT`.
 
-   :attr:`flags` can be 0 for write and read access or :cmacro:`READONLY` for
-   read-only access.  Using :cmacro:`T_STRING` for :attr:`type` implies
-   :cmacro:`READONLY`.  Only :cmacro:`T_OBJECT` and :cmacro:`T_OBJECT_EX`
+   :attr:`flags` can be 0 for write and read access or :c:macro:`READONLY` for
+   read-only access.  Using :c:macro:`T_STRING` for :attr:`type` implies
+   :c:macro:`READONLY`.  Only :c:macro:`T_OBJECT` and :c:macro:`T_OBJECT_EX`
    members can be deleted.  (They are set to *NULL*).
 
 
-.. cfunction:: PyObject* Py_FindMethod(PyMethodDef table[], PyObject *ob, char *name)
+.. c:function:: PyObject* Py_FindMethod(PyMethodDef table[], PyObject *ob, char *name)
 
    Return a bound method object for an extension type implemented in C.  This
    can be useful in the implementation of a :attr:`tp_getattro` or
    :attr:`tp_getattr` handler that does not use the
-   :cfunc:`PyObject_GenericGetAttr` function.
+   :c:func:`PyObject_GenericGetAttr` function.
diff --git a/Doc/c-api/sys.rst b/Doc/c-api/sys.rst
index 6788bc9..d354e9f 100644
--- a/Doc/c-api/sys.rst
+++ b/Doc/c-api/sys.rst
@@ -6,16 +6,16 @@
 ==========================
 
 
-.. cfunction:: int Py_FdIsInteractive(FILE *fp, const char *filename)
+.. c:function:: int Py_FdIsInteractive(FILE *fp, const char *filename)
 
    Return true (nonzero) if the standard I/O file *fp* with name *filename* is
    deemed interactive.  This is the case for files for which ``isatty(fileno(fp))``
-   is true.  If the global flag :cdata:`Py_InteractiveFlag` is true, this function
+   is true.  If the global flag :c:data:`Py_InteractiveFlag` is true, this function
    also returns true if the *filename* pointer is *NULL* or if the name is equal to
    one of the strings ``'<stdin>'`` or ``'???'``.
 
 
-.. cfunction:: void PyOS_AfterFork()
+.. c:function:: void PyOS_AfterFork()
 
    Function to update some internal state after a process fork; this should be
    called in the new process if the Python interpreter will continue to be used.
@@ -23,7 +23,7 @@
    to be called.
 
 
-.. cfunction:: int PyOS_CheckStack()
+.. c:function:: int PyOS_CheckStack()
 
    Return true when the interpreter runs out of stack space.  This is a reliable
    check, but is only available when :const:`USE_STACKCHECK` is defined (currently
@@ -32,20 +32,20 @@
    own code.
 
 
-.. cfunction:: PyOS_sighandler_t PyOS_getsig(int i)
+.. c:function:: PyOS_sighandler_t PyOS_getsig(int i)
 
    Return the current signal handler for signal *i*.  This is a thin wrapper around
-   either :cfunc:`sigaction` or :cfunc:`signal`.  Do not call those functions
-   directly! :ctype:`PyOS_sighandler_t` is a typedef alias for :ctype:`void
+   either :c:func:`sigaction` or :c:func:`signal`.  Do not call those functions
+   directly! :c:type:`PyOS_sighandler_t` is a typedef alias for :c:type:`void
    (\*)(int)`.
 
 
-.. cfunction:: PyOS_sighandler_t PyOS_setsig(int i, PyOS_sighandler_t h)
+.. c:function:: PyOS_sighandler_t PyOS_setsig(int i, PyOS_sighandler_t h)
 
    Set the signal handler for signal *i* to be *h*; return the old signal handler.
-   This is a thin wrapper around either :cfunc:`sigaction` or :cfunc:`signal`.  Do
-   not call those functions directly!  :ctype:`PyOS_sighandler_t` is a typedef
-   alias for :ctype:`void (\*)(int)`.
+   This is a thin wrapper around either :c:func:`sigaction` or :c:func:`signal`.  Do
+   not call those functions directly!  :c:type:`PyOS_sighandler_t` is a typedef
+   alias for :c:type:`void (\*)(int)`.
 
 .. _systemfunctions:
 
@@ -56,38 +56,38 @@
 accessible to C code.  They all work with the current interpreter thread's
 :mod:`sys` module's dict, which is contained in the internal thread state structure.
 
-.. cfunction:: PyObject *PySys_GetObject(char *name)
+.. c:function:: PyObject *PySys_GetObject(char *name)
 
    Return the object *name* from the :mod:`sys` module or *NULL* if it does
    not exist, without setting an exception.
 
-.. cfunction:: FILE *PySys_GetFile(char *name, FILE *def)
+.. c:function:: FILE *PySys_GetFile(char *name, FILE *def)
 
-   Return the :ctype:`FILE*` associated with the object *name* in the
+   Return the :c:type:`FILE*` associated with the object *name* in the
    :mod:`sys` module, or *def* if *name* is not in the module or is not associated
-   with a :ctype:`FILE*`.
+   with a :c:type:`FILE*`.
 
-.. cfunction:: int PySys_SetObject(char *name, PyObject *v)
+.. c:function:: int PySys_SetObject(char *name, PyObject *v)
 
    Set *name* in the :mod:`sys` module to *v* unless *v* is *NULL*, in which
    case *name* is deleted from the sys module. Returns ``0`` on success, ``-1``
    on error.
 
-.. cfunction:: void PySys_ResetWarnOptions()
+.. c:function:: void PySys_ResetWarnOptions()
 
    Reset :data:`sys.warnoptions` to an empty list.
 
-.. cfunction:: void PySys_AddWarnOption(char *s)
+.. c:function:: void PySys_AddWarnOption(char *s)
 
    Append *s* to :data:`sys.warnoptions`.
 
-.. cfunction:: void PySys_SetPath(char *path)
+.. c:function:: void PySys_SetPath(char *path)
 
    Set :data:`sys.path` to a list object of paths found in *path* which should
    be a list of paths separated with the platform's search path delimiter
    (``:`` on Unix, ``;`` on Windows).
 
-.. cfunction:: void PySys_WriteStdout(const char *format, ...)
+.. c:function:: void PySys_WriteStdout(const char *format, ...)
 
    Write the output string described by *format* to :data:`sys.stdout`.  No
    exceptions are raised, even if truncation occurs (see below).
@@ -103,7 +103,7 @@
    If a problem occurs, or :data:`sys.stdout` is unset, the formatted message
    is written to the real (C level) *stdout*.
 
-.. cfunction:: void PySys_WriteStderr(const char *format, ...)
+.. c:function:: void PySys_WriteStderr(const char *format, ...)
 
    As above, but write to :data:`sys.stderr` or *stderr* instead.
 
@@ -114,7 +114,7 @@
 ===============
 
 
-.. cfunction:: void Py_FatalError(const char *message)
+.. c:function:: void Py_FatalError(const char *message)
 
    .. index:: single: abort()
 
@@ -122,30 +122,30 @@
    This function should only be invoked when a condition is detected that would
    make it dangerous to continue using the Python interpreter; e.g., when the
    object administration appears to be corrupted.  On Unix, the standard C library
-   function :cfunc:`abort` is called which will attempt to produce a :file:`core`
+   function :c:func:`abort` is called which will attempt to produce a :file:`core`
    file.
 
 
-.. cfunction:: void Py_Exit(int status)
+.. c:function:: void Py_Exit(int status)
 
    .. index::
       single: Py_Finalize()
       single: exit()
 
-   Exit the current process.  This calls :cfunc:`Py_Finalize` and then calls the
+   Exit the current process.  This calls :c:func:`Py_Finalize` and then calls the
    standard C library function ``exit(status)``.
 
 
-.. cfunction:: int Py_AtExit(void (*func) ())
+.. c:function:: int Py_AtExit(void (*func) ())
 
    .. index::
       single: Py_Finalize()
       single: cleanup functions
 
-   Register a cleanup function to be called by :cfunc:`Py_Finalize`.  The cleanup
+   Register a cleanup function to be called by :c:func:`Py_Finalize`.  The cleanup
    function will be called with no arguments and should return no value.  At most
    32 cleanup functions can be registered.  When the registration is successful,
-   :cfunc:`Py_AtExit` returns ``0``; on failure, it returns ``-1``.  The cleanup
+   :c:func:`Py_AtExit` returns ``0``; on failure, it returns ``-1``.  The cleanup
    function registered last is called first. Each cleanup function will be called
    at most once.  Since Python's internal finalization will have completed before
    the cleanup function, no Python APIs should be called by *func*.
diff --git a/Doc/c-api/tuple.rst b/Doc/c-api/tuple.rst
index eb479d5..16de45f 100644
--- a/Doc/c-api/tuple.rst
+++ b/Doc/c-api/tuple.rst
@@ -8,20 +8,20 @@
 .. index:: object: tuple
 
 
-.. ctype:: PyTupleObject
+.. c:type:: PyTupleObject
 
-   This subtype of :ctype:`PyObject` represents a Python tuple object.
+   This subtype of :c:type:`PyObject` represents a Python tuple object.
 
 
-.. cvar:: PyTypeObject PyTuple_Type
+.. c:var:: PyTypeObject PyTuple_Type
 
    .. index:: single: TupleType (in module types)
 
-   This instance of :ctype:`PyTypeObject` represents the Python tuple type; it is
+   This instance of :c:type:`PyTypeObject` represents the Python tuple type; it is
    the same object as ``tuple`` and ``types.TupleType`` in the Python layer..
 
 
-.. cfunction:: int PyTuple_Check(PyObject *p)
+.. c:function:: int PyTuple_Check(PyObject *p)
 
    Return true if *p* is a tuple object or an instance of a subtype of the tuple
    type.
@@ -30,7 +30,7 @@
       Allowed subtypes to be accepted.
 
 
-.. cfunction:: int PyTuple_CheckExact(PyObject *p)
+.. c:function:: int PyTuple_CheckExact(PyObject *p)
 
    Return true if *p* is a tuple object, but not an instance of a subtype of the
    tuple type.
@@ -38,16 +38,16 @@
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyObject* PyTuple_New(Py_ssize_t len)
+.. c:function:: PyObject* PyTuple_New(Py_ssize_t len)
 
    Return a new tuple object of size *len*, or *NULL* on failure.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *len*. This might require
+      This function used an :c:type:`int` type for *len*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyTuple_Pack(Py_ssize_t n, ...)
+.. c:function:: PyObject* PyTuple_Pack(Py_ssize_t n, ...)
 
    Return a new tuple object of size *n*, or *NULL* on failure. The tuple values
    are initialized to the subsequent *n* C arguments pointing to Python objects.
@@ -56,59 +56,59 @@
    .. versionadded:: 2.4
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *n*. This might require
+      This function used an :c:type:`int` type for *n*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: Py_ssize_t PyTuple_Size(PyObject *p)
+.. c:function:: Py_ssize_t PyTuple_Size(PyObject *p)
 
    Take a pointer to a tuple object, and return the size of that tuple.
 
    .. versionchanged:: 2.5
-      This function returned an :ctype:`int` type. This might require changes
+      This function returned an :c:type:`int` type. This might require changes
       in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: Py_ssize_t PyTuple_GET_SIZE(PyObject *p)
+.. c:function:: Py_ssize_t PyTuple_GET_SIZE(PyObject *p)
 
    Return the size of the tuple *p*, which must be non-*NULL* and point to a tuple;
    no error checking is performed.
 
    .. versionchanged:: 2.5
-      This function returned an :ctype:`int` type. This might require changes
+      This function returned an :c:type:`int` type. This might require changes
       in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyTuple_GetItem(PyObject *p, Py_ssize_t pos)
+.. c:function:: PyObject* PyTuple_GetItem(PyObject *p, Py_ssize_t pos)
 
    Return the object at position *pos* in the tuple pointed to by *p*.  If *pos* is
    out of bounds, return *NULL* and sets an :exc:`IndexError` exception.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *pos*. This might require
+      This function used an :c:type:`int` type for *pos*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyTuple_GET_ITEM(PyObject *p, Py_ssize_t pos)
+.. c:function:: PyObject* PyTuple_GET_ITEM(PyObject *p, Py_ssize_t pos)
 
-   Like :cfunc:`PyTuple_GetItem`, but does no checking of its arguments.
+   Like :c:func:`PyTuple_GetItem`, but does no checking of its arguments.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *pos*. This might require
+      This function used an :c:type:`int` type for *pos*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyTuple_GetSlice(PyObject *p, Py_ssize_t low, Py_ssize_t high)
+.. c:function:: PyObject* PyTuple_GetSlice(PyObject *p, Py_ssize_t low, Py_ssize_t high)
 
    Take a slice of the tuple pointed to by *p* from *low* to *high* and return it
    as a new tuple.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *low* and *high*. This might
+      This function used an :c:type:`int` type for *low* and *high*. This might
       require changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: int PyTuple_SetItem(PyObject *p, Py_ssize_t pos, PyObject *o)
+.. c:function:: int PyTuple_SetItem(PyObject *p, Py_ssize_t pos, PyObject *o)
 
    Insert a reference to object *o* at position *pos* of the tuple pointed to by
    *p*. Return ``0`` on success.
@@ -118,13 +118,13 @@
       This function "steals" a reference to *o*.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *pos*. This might require
+      This function used an :c:type:`int` type for *pos*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: void PyTuple_SET_ITEM(PyObject *p, Py_ssize_t pos, PyObject *o)
+.. c:function:: void PyTuple_SET_ITEM(PyObject *p, Py_ssize_t pos, PyObject *o)
 
-   Like :cfunc:`PyTuple_SetItem`, but does no error checking, and should *only* be
+   Like :c:func:`PyTuple_SetItem`, but does no error checking, and should *only* be
    used to fill in brand new tuples.
 
    .. note::
@@ -132,11 +132,11 @@
       This function "steals" a reference to *o*.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *pos*. This might require
+      This function used an :c:type:`int` type for *pos*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: int _PyTuple_Resize(PyObject **p, Py_ssize_t newsize)
+.. c:function:: int _PyTuple_Resize(PyObject **p, Py_ssize_t newsize)
 
    Can be used to resize a tuple.  *newsize* will be the new length of the tuple.
    Because tuples are *supposed* to be immutable, this should only be used if there
@@ -153,11 +153,11 @@
       Removed unused third parameter, *last_is_sticky*.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *newsize*. This might
+      This function used an :c:type:`int` type for *newsize*. This might
       require changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: int PyTuple_ClearFreeList()
+.. c:function:: int PyTuple_ClearFreeList()
 
    Clear the free list. Return the total number of freed items.
 
diff --git a/Doc/c-api/type.rst b/Doc/c-api/type.rst
index 7d1c773..22f7dd0 100644
--- a/Doc/c-api/type.rst
+++ b/Doc/c-api/type.rst
@@ -8,12 +8,12 @@
 .. index:: object: type
 
 
-.. ctype:: PyTypeObject
+.. c:type:: PyTypeObject
 
    The C structure of the objects used to describe built-in types.
 
 
-.. cvar:: PyObject* PyType_Type
+.. c:var:: PyObject* PyType_Type
 
    .. index:: single: TypeType (in module types)
 
@@ -21,13 +21,13 @@
    ``types.TypeType`` in the Python layer.
 
 
-.. cfunction:: int PyType_Check(PyObject *o)
+.. c:function:: int PyType_Check(PyObject *o)
 
    Return true if the object *o* is a type object, including instances of types
    derived from the standard type object.  Return false in all other cases.
 
 
-.. cfunction:: int PyType_CheckExact(PyObject *o)
+.. c:function:: int PyType_CheckExact(PyObject *o)
 
    Return true if the object *o* is a type object, but not a subtype of the
    standard type object.  Return false in all other cases.
@@ -35,14 +35,14 @@
    .. versionadded:: 2.2
 
 
-.. cfunction:: unsigned int PyType_ClearCache()
+.. c:function:: unsigned int PyType_ClearCache()
 
    Clear the internal lookup cache. Return the current version tag.
 
    .. versionadded:: 2.6
 
 
-.. cfunction:: void PyType_Modified(PyTypeObject *type)
+.. c:function:: void PyType_Modified(PyTypeObject *type)
 
    Invalidate the internal lookup cache for the type and all of its
    subtypes.  This function must be called after any manual
@@ -51,13 +51,13 @@
    .. versionadded:: 2.6
 
 
-.. cfunction:: int PyType_HasFeature(PyObject *o, int feature)
+.. c:function:: int PyType_HasFeature(PyObject *o, int feature)
 
    Return true if the type object *o* sets the feature *feature*.  Type features
    are denoted by single bit flags.
 
 
-.. cfunction:: int PyType_IS_GC(PyObject *o)
+.. c:function:: int PyType_IS_GC(PyObject *o)
 
    Return true if the type object includes support for the cycle detector; this
    tests the type flag :const:`Py_TPFLAGS_HAVE_GC`.
@@ -65,28 +65,28 @@
    .. versionadded:: 2.0
 
 
-.. cfunction:: int PyType_IsSubtype(PyTypeObject *a, PyTypeObject *b)
+.. c:function:: int PyType_IsSubtype(PyTypeObject *a, PyTypeObject *b)
 
    Return true if *a* is a subtype of *b*.
 
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyObject* PyType_GenericAlloc(PyTypeObject *type, Py_ssize_t nitems)
+.. c:function:: PyObject* PyType_GenericAlloc(PyTypeObject *type, Py_ssize_t nitems)
 
    .. versionadded:: 2.2
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *nitems*. This might require
+      This function used an :c:type:`int` type for *nitems*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyType_GenericNew(PyTypeObject *type, PyObject *args, PyObject *kwds)
+.. c:function:: PyObject* PyType_GenericNew(PyTypeObject *type, PyObject *args, PyObject *kwds)
 
    .. versionadded:: 2.2
 
 
-.. cfunction:: int PyType_Ready(PyTypeObject *type)
+.. c:function:: int PyType_Ready(PyTypeObject *type)
 
    Finalize a type object.  This should be called on all type objects to finish
    their initialization.  This function is responsible for adding inherited slots
diff --git a/Doc/c-api/typeobj.rst b/Doc/c-api/typeobj.rst
index 9af4cfc..5bda1ff 100644
--- a/Doc/c-api/typeobj.rst
+++ b/Doc/c-api/typeobj.rst
@@ -6,9 +6,9 @@
 ============
 
 Perhaps one of the most important structures of the Python object system is the
-structure that defines a new type: the :ctype:`PyTypeObject` structure.  Type
-objects can be handled using any of the :cfunc:`PyObject_\*` or
-:cfunc:`PyType_\*` functions, but do not offer much that's interesting to most
+structure that defines a new type: the :c:type:`PyTypeObject` structure.  Type
+objects can be handled using any of the :c:func:`PyObject_\*` or
+:c:func:`PyType_\*` functions, but do not offer much that's interesting to most
 Python applications. These objects are fundamental to how objects behave, so
 they are very important to the interpreter itself and to any extension module
 that implements new types.
@@ -25,21 +25,21 @@
 freefunc, printfunc, getattrfunc, getattrofunc, setattrfunc, setattrofunc,
 cmpfunc, reprfunc, hashfunc
 
-The structure definition for :ctype:`PyTypeObject` can be found in
+The structure definition for :c:type:`PyTypeObject` can be found in
 :file:`Include/object.h`.  For convenience of reference, this repeats the
 definition found there:
 
 .. literalinclude:: ../includes/typestruct.h
 
 
-The type object structure extends the :ctype:`PyVarObject` structure. The
+The type object structure extends the :c:type:`PyVarObject` structure. The
 :attr:`ob_size` field is used for dynamic types (created by  :func:`type_new`,
-usually called from a class statement). Note that :cdata:`PyType_Type` (the
+usually called from a class statement). Note that :c:data:`PyType_Type` (the
 metatype) initializes :attr:`tp_itemsize`, which means that its instances (i.e.
 type objects) *must* have the :attr:`ob_size` field.
 
 
-.. cmember:: PyObject* PyObject._ob_next
+.. c:member:: PyObject* PyObject._ob_next
              PyObject* PyObject._ob_prev
 
    These fields are only present when the macro ``Py_TRACE_REFS`` is defined.
@@ -54,7 +54,7 @@
    These fields are not inherited by subtypes.
 
 
-.. cmember:: Py_ssize_t PyObject.ob_refcnt
+.. c:member:: Py_ssize_t PyObject.ob_refcnt
 
    This is the type object's reference count, initialized to ``1`` by the
    ``PyObject_HEAD_INIT`` macro.  Note that for statically allocated type objects,
@@ -65,11 +65,11 @@
    This field is not inherited by subtypes.
 
    .. versionchanged:: 2.5
-      This field used to be an :ctype:`int` type. This might require changes
+      This field used to be an :c:type:`int` type. This might require changes
       in your code for properly supporting 64-bit systems.
 
 
-.. cmember:: PyTypeObject* PyObject.ob_type
+.. c:member:: PyTypeObject* PyObject.ob_type
 
    This is the type's type, in other words its metatype.  It is initialized by the
    argument to the ``PyObject_HEAD_INIT`` macro, and its value should normally be
@@ -83,16 +83,16 @@
       Foo_Type.ob_type = &PyType_Type;
 
    This should be done before any instances of the type are created.
-   :cfunc:`PyType_Ready` checks if :attr:`ob_type` is *NULL*, and if so,
+   :c:func:`PyType_Ready` checks if :attr:`ob_type` is *NULL*, and if so,
    initializes it: in Python 2.2, it is set to ``&PyType_Type``; in Python 2.2.1
    and later it is initialized to the :attr:`ob_type` field of the base class.
-   :cfunc:`PyType_Ready` will not change this field if it is non-zero.
+   :c:func:`PyType_Ready` will not change this field if it is non-zero.
 
    In Python 2.2, this field is not inherited by subtypes.  In 2.2.1, and in 2.3
    and beyond, it is inherited by subtypes.
 
 
-.. cmember:: Py_ssize_t PyVarObject.ob_size
+.. c:member:: Py_ssize_t PyVarObject.ob_size
 
    For statically allocated type objects, this should be initialized to zero.  For
    dynamically allocated type objects, this field has a special internal meaning.
@@ -100,7 +100,7 @@
    This field is not inherited by subtypes.
 
 
-.. cmember:: char* PyTypeObject.tp_name
+.. c:member:: char* PyTypeObject.tp_name
 
    Pointer to a NUL-terminated string containing the name of the type. For types
    that are accessible as module globals, the string should be the full module
@@ -127,7 +127,7 @@
    This field is not inherited by subtypes.
 
 
-.. cmember:: Py_ssize_t PyTypeObject.tp_basicsize
+.. c:member:: Py_ssize_t PyTypeObject.tp_basicsize
              Py_ssize_t PyTypeObject.tp_itemsize
 
    These fields allow calculating the size in bytes of instances of the type.
@@ -149,7 +149,7 @@
    field).
 
    The basic size includes the fields in the instance declared by the macro
-   :cmacro:`PyObject_HEAD` or :cmacro:`PyObject_VAR_HEAD` (whichever is used to
+   :c:macro:`PyObject_HEAD` or :c:macro:`PyObject_VAR_HEAD` (whichever is used to
    declare the instance struct) and this in turn includes the :attr:`_ob_prev` and
    :attr:`_ob_next` fields if they are present.  This means that the only correct
    way to get an initializer for the :attr:`tp_basicsize` is to use the
@@ -170,14 +170,14 @@
    alignment requirement for ``double``).
 
 
-.. cmember:: destructor PyTypeObject.tp_dealloc
+.. c:member:: destructor PyTypeObject.tp_dealloc
 
    A pointer to the instance destructor function.  This function must be defined
    unless the type guarantees that its instances will never be deallocated (as is
    the case for the singletons ``None`` and ``Ellipsis``).
 
-   The destructor function is called by the :cfunc:`Py_DECREF` and
-   :cfunc:`Py_XDECREF` macros when the new reference count is zero.  At this point,
+   The destructor function is called by the :c:func:`Py_DECREF` and
+   :c:func:`Py_XDECREF` macros when the new reference count is zero.  At this point,
    the instance is still in existence, but there are no references to it.  The
    destructor function should free all references which the instance owns, free all
    memory buffers owned by the instance (using the freeing function corresponding
@@ -186,15 +186,15 @@
    subtypable (doesn't have the :const:`Py_TPFLAGS_BASETYPE` flag bit set), it is
    permissible to call the object deallocator directly instead of via
    :attr:`tp_free`.  The object deallocator should be the one used to allocate the
-   instance; this is normally :cfunc:`PyObject_Del` if the instance was allocated
-   using :cfunc:`PyObject_New` or :cfunc:`PyObject_VarNew`, or
-   :cfunc:`PyObject_GC_Del` if the instance was allocated using
-   :cfunc:`PyObject_GC_New` or :cfunc:`PyObject_GC_NewVar`.
+   instance; this is normally :c:func:`PyObject_Del` if the instance was allocated
+   using :c:func:`PyObject_New` or :c:func:`PyObject_VarNew`, or
+   :c:func:`PyObject_GC_Del` if the instance was allocated using
+   :c:func:`PyObject_GC_New` or :c:func:`PyObject_GC_NewVar`.
 
    This field is inherited by subtypes.
 
 
-.. cmember:: printfunc PyTypeObject.tp_print
+.. c:member:: printfunc PyTypeObject.tp_print
 
    An optional pointer to the instance print function.
 
@@ -205,7 +205,7 @@
    *NULL*.  A type should never implement :attr:`tp_print` in a way that produces
    different output than :attr:`tp_repr` or :attr:`tp_str` would.
 
-   The print function is called with the same signature as :cfunc:`PyObject_Print`:
+   The print function is called with the same signature as :c:func:`PyObject_Print`:
    ``int tp_print(PyObject *self, FILE *file, int flags)``.  The *self* argument is
    the instance to be printed.  The *file* argument is the stdio file to which it
    is to be printed.  The *flags* argument is composed of flag bits. The only flag
@@ -223,39 +223,39 @@
    This field is inherited by subtypes.
 
 
-.. cmember:: getattrfunc PyTypeObject.tp_getattr
+.. c:member:: getattrfunc PyTypeObject.tp_getattr
 
    An optional pointer to the get-attribute-string function.
 
    This field is deprecated.  When it is defined, it should point to a function
    that acts the same as the :attr:`tp_getattro` function, but taking a C string
    instead of a Python string object to give the attribute name.  The signature is
-   the same as for :cfunc:`PyObject_GetAttrString`.
+   the same as for :c:func:`PyObject_GetAttrString`.
 
    This field is inherited by subtypes together with :attr:`tp_getattro`: a subtype
    inherits both :attr:`tp_getattr` and :attr:`tp_getattro` from its base type when
    the subtype's :attr:`tp_getattr` and :attr:`tp_getattro` are both *NULL*.
 
 
-.. cmember:: setattrfunc PyTypeObject.tp_setattr
+.. c:member:: setattrfunc PyTypeObject.tp_setattr
 
    An optional pointer to the set-attribute-string function.
 
    This field is deprecated.  When it is defined, it should point to a function
    that acts the same as the :attr:`tp_setattro` function, but taking a C string
    instead of a Python string object to give the attribute name.  The signature is
-   the same as for :cfunc:`PyObject_SetAttrString`.
+   the same as for :c:func:`PyObject_SetAttrString`.
 
    This field is inherited by subtypes together with :attr:`tp_setattro`: a subtype
    inherits both :attr:`tp_setattr` and :attr:`tp_setattro` from its base type when
    the subtype's :attr:`tp_setattr` and :attr:`tp_setattro` are both *NULL*.
 
 
-.. cmember:: cmpfunc PyTypeObject.tp_compare
+.. c:member:: cmpfunc PyTypeObject.tp_compare
 
    An optional pointer to the three-way comparison function.
 
-   The signature is the same as for :cfunc:`PyObject_Compare`. The function should
+   The signature is the same as for :c:func:`PyObject_Compare`. The function should
    return ``1`` if *self* greater than *other*, ``0`` if *self* is equal to
    *other*, and ``-1`` if *self* less than *other*.  It should return ``-1`` and
    set an exception condition when an error occurred during the comparison.
@@ -266,14 +266,14 @@
    :attr:`tp_compare`, :attr:`tp_richcompare`, and :attr:`tp_hash` are all *NULL*.
 
 
-.. cmember:: reprfunc PyTypeObject.tp_repr
+.. c:member:: reprfunc PyTypeObject.tp_repr
 
    .. index:: builtin: repr
 
    An optional pointer to a function that implements the built-in function
    :func:`repr`.
 
-   The signature is the same as for :cfunc:`PyObject_Repr`; it must return a string
+   The signature is the same as for :c:func:`PyObject_Repr`; it must return a string
    or a Unicode object.  Ideally, this function should return a string that, when
    passed to :func:`eval`, given a suitable environment, returns an object with the
    same value.  If this is not feasible, it should return a string starting with
@@ -286,7 +286,7 @@
 
    This field is inherited by subtypes.
 
-.. cmember:: PyNumberMethods* tp_as_number
+.. c:member:: PyNumberMethods* tp_as_number
 
    Pointer to an additional structure that contains fields relevant only to
    objects which implement the number protocol.  These fields are documented in
@@ -296,7 +296,7 @@
    inherited individually.
 
 
-.. cmember:: PySequenceMethods* tp_as_sequence
+.. c:member:: PySequenceMethods* tp_as_sequence
 
    Pointer to an additional structure that contains fields relevant only to
    objects which implement the sequence protocol.  These fields are documented
@@ -306,7 +306,7 @@
    are inherited individually.
 
 
-.. cmember:: PyMappingMethods* tp_as_mapping
+.. c:member:: PyMappingMethods* tp_as_mapping
 
    Pointer to an additional structure that contains fields relevant only to
    objects which implement the mapping protocol.  These fields are documented in
@@ -316,25 +316,25 @@
    are inherited individually.
 
 
-.. cmember:: hashfunc PyTypeObject.tp_hash
+.. c:member:: hashfunc PyTypeObject.tp_hash
 
    .. index:: builtin: hash
 
    An optional pointer to a function that implements the built-in function
    :func:`hash`.
 
-   The signature is the same as for :cfunc:`PyObject_Hash`; it must return a C
+   The signature is the same as for :c:func:`PyObject_Hash`; it must return a C
    long.  The value ``-1`` should not be returned as a normal return value; when an
    error occurs during the computation of the hash value, the function should set
    an exception and return ``-1``.
 
-   This field can be set explicitly to :cfunc:`PyObject_HashNotImplemented` to
+   This field can be set explicitly to :c:func:`PyObject_HashNotImplemented` to
    block inheritance of the hash method from a parent type. This is interpreted
    as the equivalent of ``__hash__ = None`` at the Python level, causing
    ``isinstance(o, collections.Hashable)`` to correctly return ``False``. Note
    that the converse is also true - setting ``__hash__ = None`` on a class at
    the Python level will result in the ``tp_hash`` slot being set to
-   :cfunc:`PyObject_HashNotImplemented`.
+   :c:func:`PyObject_HashNotImplemented`.
 
    When this field is not set, two possibilities exist: if the :attr:`tp_compare`
    and :attr:`tp_richcompare` fields are both *NULL*, a default hash value based on
@@ -346,39 +346,39 @@
    :attr:`tp_compare`, :attr:`tp_richcompare` and :attr:`tp_hash` are all *NULL*.
 
 
-.. cmember:: ternaryfunc PyTypeObject.tp_call
+.. c:member:: ternaryfunc PyTypeObject.tp_call
 
    An optional pointer to a function that implements calling the object.  This
    should be *NULL* if the object is not callable.  The signature is the same as
-   for :cfunc:`PyObject_Call`.
+   for :c:func:`PyObject_Call`.
 
    This field is inherited by subtypes.
 
 
-.. cmember:: reprfunc PyTypeObject.tp_str
+.. c:member:: reprfunc PyTypeObject.tp_str
 
    An optional pointer to a function that implements the built-in operation
    :func:`str`.  (Note that :class:`str` is a type now, and :func:`str` calls the
-   constructor for that type.  This constructor calls :cfunc:`PyObject_Str` to do
-   the actual work, and :cfunc:`PyObject_Str` will call this handler.)
+   constructor for that type.  This constructor calls :c:func:`PyObject_Str` to do
+   the actual work, and :c:func:`PyObject_Str` will call this handler.)
 
-   The signature is the same as for :cfunc:`PyObject_Str`; it must return a string
+   The signature is the same as for :c:func:`PyObject_Str`; it must return a string
    or a Unicode object.  This function should return a "friendly" string
    representation of the object, as this is the representation that will be used by
    the print statement.
 
-   When this field is not set, :cfunc:`PyObject_Repr` is called to return a string
+   When this field is not set, :c:func:`PyObject_Repr` is called to return a string
    representation.
 
    This field is inherited by subtypes.
 
 
-.. cmember:: getattrofunc PyTypeObject.tp_getattro
+.. c:member:: getattrofunc PyTypeObject.tp_getattro
 
    An optional pointer to the get-attribute function.
 
-   The signature is the same as for :cfunc:`PyObject_GetAttr`.  It is usually
-   convenient to set this field to :cfunc:`PyObject_GenericGetAttr`, which
+   The signature is the same as for :c:func:`PyObject_GetAttr`.  It is usually
+   convenient to set this field to :c:func:`PyObject_GenericGetAttr`, which
    implements the normal way of looking for object attributes.
 
    This field is inherited by subtypes together with :attr:`tp_getattr`: a subtype
@@ -386,12 +386,12 @@
    the subtype's :attr:`tp_getattr` and :attr:`tp_getattro` are both *NULL*.
 
 
-.. cmember:: setattrofunc PyTypeObject.tp_setattro
+.. c:member:: setattrofunc PyTypeObject.tp_setattro
 
    An optional pointer to the set-attribute function.
 
-   The signature is the same as for :cfunc:`PyObject_SetAttr`.  It is usually
-   convenient to set this field to :cfunc:`PyObject_GenericSetAttr`, which
+   The signature is the same as for :c:func:`PyObject_SetAttr`.  It is usually
+   convenient to set this field to :c:func:`PyObject_GenericSetAttr`, which
    implements the normal way of setting object attributes.
 
    This field is inherited by subtypes together with :attr:`tp_setattr`: a subtype
@@ -399,7 +399,7 @@
    the subtype's :attr:`tp_setattr` and :attr:`tp_setattro` are both *NULL*.
 
 
-.. cmember:: PyBufferProcs* PyTypeObject.tp_as_buffer
+.. c:member:: PyBufferProcs* PyTypeObject.tp_as_buffer
 
    Pointer to an additional structure that contains fields relevant only to objects
    which implement the buffer interface.  These fields are documented in
@@ -409,7 +409,7 @@
    inherited individually.
 
 
-.. cmember:: long PyTypeObject.tp_flags
+.. c:member:: long PyTypeObject.tp_flags
 
    This field is a bit mask of various flags.  Some flags indicate variant
    semantics for certain situations; others are used to indicate that certain
@@ -433,19 +433,19 @@
 
    The following bit masks are currently defined; these can be ORed together using
    the ``|`` operator to form the value of the :attr:`tp_flags` field.  The macro
-   :cfunc:`PyType_HasFeature` takes a type and a flags value, *tp* and *f*, and
+   :c:func:`PyType_HasFeature` takes a type and a flags value, *tp* and *f*, and
    checks whether ``tp->tp_flags & f`` is non-zero.
 
 
    .. data:: Py_TPFLAGS_HAVE_GETCHARBUFFER
 
-      If this bit is set, the :ctype:`PyBufferProcs` struct referenced by
+      If this bit is set, the :c:type:`PyBufferProcs` struct referenced by
       :attr:`tp_as_buffer` has the :attr:`bf_getcharbuffer` field.
 
 
    .. data:: Py_TPFLAGS_HAVE_SEQUENCE_IN
 
-      If this bit is set, the :ctype:`PySequenceMethods` struct referenced by
+      If this bit is set, the :c:type:`PySequenceMethods` struct referenced by
       :attr:`tp_as_sequence` has the :attr:`sq_contains` field.
 
 
@@ -457,23 +457,23 @@
 
    .. data:: Py_TPFLAGS_HAVE_INPLACEOPS
 
-      If this bit is set, the :ctype:`PySequenceMethods` struct referenced by
-      :attr:`tp_as_sequence` and the :ctype:`PyNumberMethods` structure referenced by
+      If this bit is set, the :c:type:`PySequenceMethods` struct referenced by
+      :attr:`tp_as_sequence` and the :c:type:`PyNumberMethods` structure referenced by
       :attr:`tp_as_number` contain the fields for in-place operators. In particular,
-      this means that the :ctype:`PyNumberMethods` structure has the fields
+      this means that the :c:type:`PyNumberMethods` structure has the fields
       :attr:`nb_inplace_add`, :attr:`nb_inplace_subtract`,
       :attr:`nb_inplace_multiply`, :attr:`nb_inplace_divide`,
       :attr:`nb_inplace_remainder`, :attr:`nb_inplace_power`,
       :attr:`nb_inplace_lshift`, :attr:`nb_inplace_rshift`, :attr:`nb_inplace_and`,
       :attr:`nb_inplace_xor`, and :attr:`nb_inplace_or`; and the
-      :ctype:`PySequenceMethods` struct has the fields :attr:`sq_inplace_concat` and
+      :c:type:`PySequenceMethods` struct has the fields :attr:`sq_inplace_concat` and
       :attr:`sq_inplace_repeat`.
 
 
    .. data:: Py_TPFLAGS_CHECKTYPES
 
       If this bit is set, the binary and ternary operations in the
-      :ctype:`PyNumberMethods` structure referenced by :attr:`tp_as_number` accept
+      :c:type:`PyNumberMethods` structure referenced by :attr:`tp_as_number` accept
       arguments of arbitrary object types, and do their own type conversions if
       needed.  If this bit is clear, those operations require that all arguments have
       the current type as their type, and the caller is supposed to perform a coercion
@@ -532,20 +532,20 @@
    .. data:: Py_TPFLAGS_READY
 
       This bit is set when the type object has been fully initialized by
-      :cfunc:`PyType_Ready`.
+      :c:func:`PyType_Ready`.
 
 
    .. data:: Py_TPFLAGS_READYING
 
-      This bit is set while :cfunc:`PyType_Ready` is in the process of initializing
+      This bit is set while :c:func:`PyType_Ready` is in the process of initializing
       the type object.
 
 
    .. data:: Py_TPFLAGS_HAVE_GC
 
       This bit is set when the object supports garbage collection.  If this bit
-      is set, instances must be created using :cfunc:`PyObject_GC_New` and
-      destroyed using :cfunc:`PyObject_GC_Del`.  More information in section
+      is set, instances must be created using :c:func:`PyObject_GC_New` and
+      destroyed using :c:func:`PyObject_GC_Del`.  More information in section
       :ref:`supporting-cycle-detection`.  This bit also implies that the
       GC-related fields :attr:`tp_traverse` and :attr:`tp_clear` are present in
       the type object; but those fields also exist when
@@ -563,7 +563,7 @@
       :const:`Py_TPFLAGS_HAVE_ITER`, and :const:`Py_TPFLAGS_HAVE_CLASS`.
 
 
-.. cmember:: char* PyTypeObject.tp_doc
+.. c:member:: char* PyTypeObject.tp_doc
 
    An optional pointer to a NUL-terminated C string giving the docstring for this
    type object.  This is exposed as the :attr:`__doc__` attribute on the type and
@@ -575,7 +575,7 @@
 :const:`Py_TPFLAGS_HAVE_RICHCOMPARE` flag bit is set.
 
 
-.. cmember:: traverseproc PyTypeObject.tp_traverse
+.. c:member:: traverseproc PyTypeObject.tp_traverse
 
    An optional pointer to a traversal function for the garbage collector.  This is
    only used if the :const:`Py_TPFLAGS_HAVE_GC` flag bit is set.  More information
@@ -584,8 +584,8 @@
 
    The :attr:`tp_traverse` pointer is used by the garbage collector to detect
    reference cycles. A typical implementation of a :attr:`tp_traverse` function
-   simply calls :cfunc:`Py_VISIT` on each of the instance's members that are Python
-   objects.  For example, this is function :cfunc:`local_traverse` from the
+   simply calls :c:func:`Py_VISIT` on each of the instance's members that are Python
+   objects.  For example, this is function :c:func:`local_traverse` from the
    :mod:`thread` extension module::
 
       static int
@@ -597,7 +597,7 @@
           return 0;
       }
 
-   Note that :cfunc:`Py_VISIT` is called only on those members that can participate
+   Note that :c:func:`Py_VISIT` is called only on those members that can participate
    in reference cycles.  Although there is also a ``self->key`` member, it can only
    be *NULL* or a Python string and therefore cannot be part of a reference cycle.
 
@@ -605,8 +605,8 @@
    debugging aid you may want to visit it anyway just so the :mod:`gc` module's
    :func:`get_referents` function will include it.
 
-   Note that :cfunc:`Py_VISIT` requires the *visit* and *arg* parameters to
-   :cfunc:`local_traverse` to have these specific names; don't name them just
+   Note that :c:func:`Py_VISIT` requires the *visit* and *arg* parameters to
+   :c:func:`local_traverse` to have these specific names; don't name them just
    anything.
 
    This field is inherited by subtypes together with :attr:`tp_clear` and the
@@ -616,7 +616,7 @@
    bit set.
 
 
-.. cmember:: inquiry PyTypeObject.tp_clear
+.. c:member:: inquiry PyTypeObject.tp_clear
 
    An optional pointer to a clear function for the garbage collector. This is only
    used if the :const:`Py_TPFLAGS_HAVE_GC` flag bit is set.
@@ -645,7 +645,7 @@
           return 0;
       }
 
-   The :cfunc:`Py_CLEAR` macro should be used, because clearing references is
+   The :c:func:`Py_CLEAR` macro should be used, because clearing references is
    delicate:  the reference to the contained object must not be decremented until
    after the pointer to the contained object is set to *NULL*.  This is because
    decrementing the reference count may cause the contained object to become trash,
@@ -654,7 +654,7 @@
    contained object). If it's possible for such code to reference *self* again,
    it's important that the pointer to the contained object be *NULL* at that time,
    so that *self* knows the contained object can no longer be used.  The
-   :cfunc:`Py_CLEAR` macro performs the operations in a safe order.
+   :c:func:`Py_CLEAR` macro performs the operations in a safe order.
 
    Because the goal of :attr:`tp_clear` functions is to break reference cycles,
    it's not necessary to clear contained objects like Python strings or Python
@@ -672,7 +672,7 @@
    bit set.
 
 
-.. cmember:: richcmpfunc PyTypeObject.tp_richcompare
+.. c:member:: richcmpfunc PyTypeObject.tp_richcompare
 
    An optional pointer to the rich comparison function, whose signature is
    ``PyObject *tp_richcompare(PyObject *a, PyObject *b, int op)``.
@@ -694,7 +694,7 @@
    :attr:`tp_compare`, :attr:`tp_richcompare`, and :attr:`tp_hash` are all *NULL*.
 
    The following constants are defined to be used as the third argument for
-   :attr:`tp_richcompare` and for :cfunc:`PyObject_RichCompare`:
+   :attr:`tp_richcompare` and for :c:func:`PyObject_RichCompare`:
 
    +----------------+------------+
    | Constant       | Comparison |
@@ -716,13 +716,13 @@
 The next field only exists if the :const:`Py_TPFLAGS_HAVE_WEAKREFS` flag bit is
 set.
 
-.. cmember:: long PyTypeObject.tp_weaklistoffset
+.. c:member:: long PyTypeObject.tp_weaklistoffset
 
    If the instances of this type are weakly referenceable, this field is greater
    than zero and contains the offset in the instance structure of the weak
    reference list head (ignoring the GC header, if present); this offset is used by
-   :cfunc:`PyObject_ClearWeakRefs` and the :cfunc:`PyWeakref_\*` functions.  The
-   instance structure needs to include a field of type :ctype:`PyObject\*` which is
+   :c:func:`PyObject_ClearWeakRefs` and the :c:func:`PyWeakref_\*` functions.  The
+   instance structure needs to include a field of type :c:type:`PyObject\*` which is
    initialized to *NULL*.
 
    Do not confuse this field with :attr:`tp_weaklist`; that is the list head for
@@ -751,19 +751,19 @@
 set.
 
 
-.. cmember:: getiterfunc PyTypeObject.tp_iter
+.. c:member:: getiterfunc PyTypeObject.tp_iter
 
    An optional pointer to a function that returns an iterator for the object.  Its
    presence normally signals that the instances of this type are iterable (although
    sequences may be iterable without this function, and classic instances always
    have this function, even if they don't define an :meth:`__iter__` method).
 
-   This function has the same signature as :cfunc:`PyObject_GetIter`.
+   This function has the same signature as :c:func:`PyObject_GetIter`.
 
    This field is inherited by subtypes.
 
 
-.. cmember:: iternextfunc PyTypeObject.tp_iternext
+.. c:member:: iternextfunc PyTypeObject.tp_iternext
 
    An optional pointer to a function that returns the next item in an iterator.
    When the iterator is exhausted, it must return *NULL*; a :exc:`StopIteration`
@@ -776,7 +776,7 @@
    function should return the iterator instance itself (not a new iterator
    instance).
 
-   This function has the same signature as :cfunc:`PyIter_Next`.
+   This function has the same signature as :c:func:`PyIter_Next`.
 
    This field is inherited by subtypes.
 
@@ -784,9 +784,9 @@
 :const:`Py_TPFLAGS_HAVE_CLASS` flag bit is set.
 
 
-.. cmember:: struct PyMethodDef* PyTypeObject.tp_methods
+.. c:member:: struct PyMethodDef* PyTypeObject.tp_methods
 
-   An optional pointer to a static *NULL*-terminated array of :ctype:`PyMethodDef`
+   An optional pointer to a static *NULL*-terminated array of :c:type:`PyMethodDef`
    structures, declaring regular methods of this type.
 
    For each entry in the array, an entry is added to the type's dictionary (see
@@ -796,9 +796,9 @@
    different mechanism).
 
 
-.. cmember:: struct PyMemberDef* PyTypeObject.tp_members
+.. c:member:: struct PyMemberDef* PyTypeObject.tp_members
 
-   An optional pointer to a static *NULL*-terminated array of :ctype:`PyMemberDef`
+   An optional pointer to a static *NULL*-terminated array of :c:type:`PyMemberDef`
    structures, declaring regular data members (fields or slots) of instances of
    this type.
 
@@ -809,9 +809,9 @@
    different mechanism).
 
 
-.. cmember:: struct PyGetSetDef* PyTypeObject.tp_getset
+.. c:member:: struct PyGetSetDef* PyTypeObject.tp_getset
 
-   An optional pointer to a static *NULL*-terminated array of :ctype:`PyGetSetDef`
+   An optional pointer to a static *NULL*-terminated array of :c:type:`PyGetSetDef`
    structures, declaring computed attributes of instances of this type.
 
    For each entry in the array, an entry is added to the type's dictionary (see
@@ -836,7 +836,7 @@
       } PyGetSetDef;
 
 
-.. cmember:: PyTypeObject* PyTypeObject.tp_base
+.. c:member:: PyTypeObject* PyTypeObject.tp_base
 
    An optional pointer to a base type from which type properties are inherited.  At
    this level, only single inheritance is supported; multiple inheritance require
@@ -847,13 +847,13 @@
    :class:`object`).
 
 
-.. cmember:: PyObject* PyTypeObject.tp_dict
+.. c:member:: PyObject* PyTypeObject.tp_dict
 
-   The type's dictionary is stored here by :cfunc:`PyType_Ready`.
+   The type's dictionary is stored here by :c:func:`PyType_Ready`.
 
    This field should normally be initialized to *NULL* before PyType_Ready is
    called; it may also be initialized to a dictionary containing initial attributes
-   for the type.  Once :cfunc:`PyType_Ready` has initialized the type, extra
+   for the type.  Once :c:func:`PyType_Ready` has initialized the type, extra
    attributes for the type may be added to this dictionary only if they don't
    correspond to overloaded operations (like :meth:`__add__`).
 
@@ -861,7 +861,7 @@
    are inherited through a different mechanism).
 
 
-.. cmember:: descrgetfunc PyTypeObject.tp_descr_get
+.. c:member:: descrgetfunc PyTypeObject.tp_descr_get
 
    An optional pointer to a "descriptor get" function.
 
@@ -874,7 +874,7 @@
    This field is inherited by subtypes.
 
 
-.. cmember:: descrsetfunc PyTypeObject.tp_descr_set
+.. c:member:: descrsetfunc PyTypeObject.tp_descr_set
 
    An optional pointer to a "descriptor set" function.
 
@@ -887,12 +887,12 @@
    .. XXX explain.
 
 
-.. cmember:: long PyTypeObject.tp_dictoffset
+.. c:member:: long PyTypeObject.tp_dictoffset
 
    If the instances of this type have a dictionary containing instance variables,
    this field is non-zero and contains the offset in the instances of the type of
    the instance variable dictionary; this offset is used by
-   :cfunc:`PyObject_GenericGetAttr`.
+   :c:func:`PyObject_GenericGetAttr`.
 
    Do not confuse this field with :attr:`tp_dict`; that is the dictionary for
    attributes of the type object itself.
@@ -920,7 +920,7 @@
    taken from the type object, and :attr:`ob_size` is taken from the instance.  The
    absolute value is taken because long ints use the sign of :attr:`ob_size` to
    store the sign of the number.  (There's never a need to do this calculation
-   yourself; it is done for you by :cfunc:`_PyObject_GetDictPtr`.)
+   yourself; it is done for you by :c:func:`_PyObject_GetDictPtr`.)
 
    This field is inherited by subtypes, but see the rules listed below. A subtype
    may override this offset; this means that the subtype instances store the
@@ -940,7 +940,7 @@
    added as a feature just like :attr:`__weakref__` though.)
 
 
-.. cmember:: initproc PyTypeObject.tp_init
+.. c:member:: initproc PyTypeObject.tp_init
 
    An optional pointer to an instance initialization function.
 
@@ -970,7 +970,7 @@
    This field is inherited by subtypes.
 
 
-.. cmember:: allocfunc PyTypeObject.tp_alloc
+.. c:member:: allocfunc PyTypeObject.tp_alloc
 
    An optional pointer to an instance allocation function.
 
@@ -993,11 +993,11 @@
 
    This field is inherited by static subtypes, but not by dynamic subtypes
    (subtypes created by a class statement); in the latter, this field is always set
-   to :cfunc:`PyType_GenericAlloc`, to force a standard heap allocation strategy.
+   to :c:func:`PyType_GenericAlloc`, to force a standard heap allocation strategy.
    That is also the recommended value for statically defined types.
 
 
-.. cmember:: newfunc PyTypeObject.tp_new
+.. c:member:: newfunc PyTypeObject.tp_new
 
    An optional pointer to an instance creation function.
 
@@ -1029,16 +1029,16 @@
    being linked with Python 2.2.
 
 
-.. cmember:: destructor PyTypeObject.tp_free
+.. c:member:: destructor PyTypeObject.tp_free
 
    An optional pointer to an instance deallocation function.
 
    The signature of this function has changed slightly: in Python 2.2 and 2.2.1,
-   its signature is :ctype:`destructor`::
+   its signature is :c:type:`destructor`::
 
       void tp_free(PyObject *)
 
-   In Python 2.3 and beyond, its signature is :ctype:`freefunc`::
+   In Python 2.3 and beyond, its signature is :c:type:`freefunc`::
 
       void tp_free(void *)
 
@@ -1047,11 +1047,11 @@
 
    This field is inherited by static subtypes, but not by dynamic subtypes
    (subtypes created by a class statement); in the latter, this field is set to a
-   deallocator suitable to match :cfunc:`PyType_GenericAlloc` and the value of the
+   deallocator suitable to match :c:func:`PyType_GenericAlloc` and the value of the
    :const:`Py_TPFLAGS_HAVE_GC` flag bit.
 
 
-.. cmember:: inquiry PyTypeObject.tp_is_gc
+.. c:member:: inquiry PyTypeObject.tp_is_gc
 
    An optional pointer to a function called by the garbage collector.
 
@@ -1066,14 +1066,14 @@
       int tp_is_gc(PyObject *self)
 
    (The only example of this are types themselves.  The metatype,
-   :cdata:`PyType_Type`, defines this function to distinguish between statically
+   :c:data:`PyType_Type`, defines this function to distinguish between statically
    and dynamically allocated types.)
 
    This field is inherited by subtypes.  (VERSION NOTE: in Python 2.2, it was not
    inherited.  It is inherited in 2.2.1 and later versions.)
 
 
-.. cmember:: PyObject* PyTypeObject.tp_bases
+.. c:member:: PyObject* PyTypeObject.tp_bases
 
    Tuple of base types.
 
@@ -1083,25 +1083,25 @@
    This field is not inherited.
 
 
-.. cmember:: PyObject* PyTypeObject.tp_mro
+.. c:member:: PyObject* PyTypeObject.tp_mro
 
    Tuple containing the expanded set of base types, starting with the type itself
    and ending with :class:`object`, in Method Resolution Order.
 
-   This field is not inherited; it is calculated fresh by :cfunc:`PyType_Ready`.
+   This field is not inherited; it is calculated fresh by :c:func:`PyType_Ready`.
 
 
-.. cmember:: PyObject* PyTypeObject.tp_cache
+.. c:member:: PyObject* PyTypeObject.tp_cache
 
    Unused.  Not inherited.  Internal use only.
 
 
-.. cmember:: PyObject* PyTypeObject.tp_subclasses
+.. c:member:: PyObject* PyTypeObject.tp_subclasses
 
    List of weak references to subclasses.  Not inherited.  Internal use only.
 
 
-.. cmember:: PyObject* PyTypeObject.tp_weaklist
+.. c:member:: PyObject* PyTypeObject.tp_weaklist
 
    Weak reference list head, for weak references to this type object.  Not
    inherited.  Internal use only.
@@ -1112,22 +1112,22 @@
 subtypes.
 
 
-.. cmember:: Py_ssize_t PyTypeObject.tp_allocs
+.. c:member:: Py_ssize_t PyTypeObject.tp_allocs
 
    Number of allocations.
 
 
-.. cmember:: Py_ssize_t PyTypeObject.tp_frees
+.. c:member:: Py_ssize_t PyTypeObject.tp_frees
 
    Number of frees.
 
 
-.. cmember:: Py_ssize_t PyTypeObject.tp_maxalloc
+.. c:member:: Py_ssize_t PyTypeObject.tp_maxalloc
 
    Maximum simultaneously allocated objects.
 
 
-.. cmember:: PyTypeObject* PyTypeObject.tp_next
+.. c:member:: PyTypeObject* PyTypeObject.tp_next
 
    Pointer to the next type object with a non-zero :attr:`tp_allocs` field.
 
@@ -1150,7 +1150,7 @@
 .. sectionauthor:: Amaury Forgeot d'Arc
 
 
-.. ctype:: PyNumberMethods
+.. c:type:: PyNumberMethods
 
    This structure holds pointers to the functions which an object uses to
    implement the number protocol.  Almost every function below is used by the
@@ -1215,9 +1215,9 @@
   the coercion method specified by the :attr:`nb_coerce` member to convert the
   arguments:
 
-  .. cmember:: coercion PyNumberMethods.nb_coerce
+  .. c:member:: coercion PyNumberMethods.nb_coerce
 
-     This function is used by :cfunc:`PyNumber_CoerceEx` and has the same
+     This function is used by :c:func:`PyNumber_CoerceEx` and has the same
      signature.  The first argument is always a pointer to an object of the
      defined type.  If the conversion to a common "larger" type is possible, the
      function replaces the pointers with new references to the converted objects
@@ -1243,26 +1243,26 @@
 .. sectionauthor:: Amaury Forgeot d'Arc
 
 
-.. ctype:: PyMappingMethods
+.. c:type:: PyMappingMethods
 
    This structure holds pointers to the functions which an object uses to
    implement the mapping protocol.  It has three members:
 
-.. cmember:: lenfunc PyMappingMethods.mp_length
+.. c:member:: lenfunc PyMappingMethods.mp_length
 
-   This function is used by :cfunc:`PyMapping_Length` and
-   :cfunc:`PyObject_Size`, and has the same signature.  This slot may be set to
+   This function is used by :c:func:`PyMapping_Length` and
+   :c:func:`PyObject_Size`, and has the same signature.  This slot may be set to
    *NULL* if the object has no defined length.
 
-.. cmember:: binaryfunc PyMappingMethods.mp_subscript
+.. c:member:: binaryfunc PyMappingMethods.mp_subscript
 
-   This function is used by :cfunc:`PyObject_GetItem` and has the same
-   signature.  This slot must be filled for the :cfunc:`PyMapping_Check`
+   This function is used by :c:func:`PyObject_GetItem` and has the same
+   signature.  This slot must be filled for the :c:func:`PyMapping_Check`
    function to return ``1``, it can be *NULL* otherwise.
 
-.. cmember:: objobjargproc PyMappingMethods.mp_ass_subscript
+.. c:member:: objobjargproc PyMappingMethods.mp_ass_subscript
 
-   This function is used by :cfunc:`PyObject_SetItem` and has the same
+   This function is used by :c:func:`PyObject_SetItem` and has the same
    signature.  If this slot is *NULL*, the object does not support item
    assignment.
 
@@ -1275,32 +1275,32 @@
 .. sectionauthor:: Amaury Forgeot d'Arc
 
 
-.. ctype:: PySequenceMethods
+.. c:type:: PySequenceMethods
 
    This structure holds pointers to the functions which an object uses to
    implement the sequence protocol.
 
-.. cmember:: lenfunc PySequenceMethods.sq_length
+.. c:member:: lenfunc PySequenceMethods.sq_length
 
-   This function is used by :cfunc:`PySequence_Size` and :cfunc:`PyObject_Size`,
+   This function is used by :c:func:`PySequence_Size` and :c:func:`PyObject_Size`,
    and has the same signature.
 
-.. cmember:: binaryfunc PySequenceMethods.sq_concat
+.. c:member:: binaryfunc PySequenceMethods.sq_concat
 
-   This function is used by :cfunc:`PySequence_Concat` and has the same
+   This function is used by :c:func:`PySequence_Concat` and has the same
    signature.  It is also used by the ``+`` operator, after trying the numeric
    addition via the :attr:`tp_as_number.nb_add` slot.
 
-.. cmember:: ssizeargfunc PySequenceMethods.sq_repeat
+.. c:member:: ssizeargfunc PySequenceMethods.sq_repeat
 
-   This function is used by :cfunc:`PySequence_Repeat` and has the same
+   This function is used by :c:func:`PySequence_Repeat` and has the same
    signature.  It is also used by the ``*`` operator, after trying numeric
    multiplication via the :attr:`tp_as_number.nb_mul` slot.
 
-.. cmember:: ssizeargfunc PySequenceMethods.sq_item
+.. c:member:: ssizeargfunc PySequenceMethods.sq_item
 
-   This function is used by :cfunc:`PySequence_GetItem` and has the same
-   signature.  This slot must be filled for the :cfunc:`PySequence_Check`
+   This function is used by :c:func:`PySequence_GetItem` and has the same
+   signature.  This slot must be filled for the :c:func:`PySequence_Check`
    function to return ``1``, it can be *NULL* otherwise.
 
    Negative indexes are handled as follows: if the :attr:`sq_length` slot is
@@ -1308,27 +1308,27 @@
    index which is passed to :attr:`sq_item`.  If :attr:`sq_length` is *NULL*,
    the index is passed as is to the function.
 
-.. cmember:: ssizeobjargproc PySequenceMethods.sq_ass_item
+.. c:member:: ssizeobjargproc PySequenceMethods.sq_ass_item
 
-   This function is used by :cfunc:`PySequence_SetItem` and has the same
+   This function is used by :c:func:`PySequence_SetItem` and has the same
    signature.  This slot may be left to *NULL* if the object does not support
    item assignment.
 
-.. cmember:: objobjproc PySequenceMethods.sq_contains
+.. c:member:: objobjproc PySequenceMethods.sq_contains
 
-   This function may be used by :cfunc:`PySequence_Contains` and has the same
+   This function may be used by :c:func:`PySequence_Contains` and has the same
    signature.  This slot may be left to *NULL*, in this case
-   :cfunc:`PySequence_Contains` simply traverses the sequence until it finds a
+   :c:func:`PySequence_Contains` simply traverses the sequence until it finds a
    match.
 
-.. cmember:: binaryfunc PySequenceMethods.sq_inplace_concat
+.. c:member:: binaryfunc PySequenceMethods.sq_inplace_concat
 
-   This function is used by :cfunc:`PySequence_InPlaceConcat` and has the same
+   This function is used by :c:func:`PySequence_InPlaceConcat` and has the same
    signature.  It should modify its first operand, and return it.
 
-.. cmember:: ssizeargfunc PySequenceMethods.sq_inplace_repeat
+.. c:member:: ssizeargfunc PySequenceMethods.sq_inplace_repeat
 
-   This function is used by :cfunc:`PySequence_InPlaceRepeat` and has the same
+   This function is used by :c:func:`PySequence_InPlaceRepeat` and has the same
    signature.  It should modify its first operand, and return it.
 
 .. XXX need to explain precedence between mapping and sequence
@@ -1349,45 +1349,45 @@
 to be non-contiguous in memory.
 
 If an object does not export the buffer interface, then its :attr:`tp_as_buffer`
-member in the :ctype:`PyTypeObject` structure should be *NULL*.  Otherwise, the
-:attr:`tp_as_buffer` will point to a :ctype:`PyBufferProcs` structure.
+member in the :c:type:`PyTypeObject` structure should be *NULL*.  Otherwise, the
+:attr:`tp_as_buffer` will point to a :c:type:`PyBufferProcs` structure.
 
 .. note::
 
-   It is very important that your :ctype:`PyTypeObject` structure uses
+   It is very important that your :c:type:`PyTypeObject` structure uses
    :const:`Py_TPFLAGS_DEFAULT` for the value of the :attr:`tp_flags` member rather
-   than ``0``.  This tells the Python runtime that your :ctype:`PyBufferProcs`
+   than ``0``.  This tells the Python runtime that your :c:type:`PyBufferProcs`
    structure contains the :attr:`bf_getcharbuffer` slot. Older versions of Python
    did not have this member, so a new Python interpreter using an old extension
    needs to be able to test for its presence before using it.
 
 
-.. ctype:: PyBufferProcs
+.. c:type:: PyBufferProcs
 
    Structure used to hold the function pointers which define an implementation of
    the buffer protocol.
 
-   The first slot is :attr:`bf_getreadbuffer`, of type :ctype:`getreadbufferproc`.
+   The first slot is :attr:`bf_getreadbuffer`, of type :c:type:`getreadbufferproc`.
    If this slot is *NULL*, then the object does not support reading from the
    internal data.  This is non-sensical, so implementors should fill this in, but
    callers should test that the slot contains a non-*NULL* value.
 
    The next slot is :attr:`bf_getwritebuffer` having type
-   :ctype:`getwritebufferproc`.  This slot may be *NULL* if the object does not
+   :c:type:`getwritebufferproc`.  This slot may be *NULL* if the object does not
    allow writing into its returned buffers.
 
-   The third slot is :attr:`bf_getsegcount`, with type :ctype:`getsegcountproc`.
+   The third slot is :attr:`bf_getsegcount`, with type :c:type:`getsegcountproc`.
    This slot must not be *NULL* and is used to inform the caller how many segments
-   the object contains.  Simple objects such as :ctype:`PyString_Type` and
-   :ctype:`PyBuffer_Type` objects contain a single segment.
+   the object contains.  Simple objects such as :c:type:`PyString_Type` and
+   :c:type:`PyBuffer_Type` objects contain a single segment.
 
    .. index:: single: PyType_HasFeature()
 
-   The last slot is :attr:`bf_getcharbuffer`, of type :ctype:`getcharbufferproc`.
+   The last slot is :attr:`bf_getcharbuffer`, of type :c:type:`getcharbufferproc`.
    This slot will only be present if the :const:`Py_TPFLAGS_HAVE_GETCHARBUFFER`
    flag is present in the :attr:`tp_flags` field of the object's
-   :ctype:`PyTypeObject`. Before using this slot, the caller should test whether it
-   is present by using the :cfunc:`PyType_HasFeature` function.  If the flag is
+   :c:type:`PyTypeObject`. Before using this slot, the caller should test whether it
+   is present by using the :c:func:`PyType_HasFeature` function.  If the flag is
    present, :attr:`bf_getcharbuffer` may be *NULL*, indicating that the object's
    contents cannot be used as *8-bit characters*. The slot function may also raise
    an error if the object's contents cannot be interpreted as 8-bit characters.
@@ -1411,7 +1411,7 @@
    buffer interface or that the :attr:`bf_getcharbuffer` slot is non-*NULL*.
 
 
-.. ctype:: Py_ssize_t (*readbufferproc) (PyObject *self, Py_ssize_t segment, void **ptrptr)
+.. c:type:: Py_ssize_t (*readbufferproc) (PyObject *self, Py_ssize_t segment, void **ptrptr)
 
    Return a pointer to a readable segment of the buffer in ``*ptrptr``.  This
    function is allowed to raise an exception, in which case it must return ``-1``.
@@ -1421,7 +1421,7 @@
    ``*ptrptr`` to a pointer to that memory.
 
 
-.. ctype:: Py_ssize_t (*writebufferproc) (PyObject *self, Py_ssize_t segment, void **ptrptr)
+.. c:type:: Py_ssize_t (*writebufferproc) (PyObject *self, Py_ssize_t segment, void **ptrptr)
 
    Return a pointer to a writable memory buffer in ``*ptrptr``, and the length of
    that segment as the function return value.  The memory buffer must correspond to
@@ -1435,14 +1435,14 @@
       segment. That indicates a blatant programming error in the C code.
 
 
-.. ctype:: Py_ssize_t (*segcountproc) (PyObject *self, Py_ssize_t *lenp)
+.. c:type:: Py_ssize_t (*segcountproc) (PyObject *self, Py_ssize_t *lenp)
 
    Return the number of memory segments which comprise the buffer.  If *lenp* is
    not *NULL*, the implementation must report the sum of the sizes (in bytes) of
    all segments in ``*lenp``. The function cannot fail.
 
 
-.. ctype:: Py_ssize_t (*charbufferproc) (PyObject *self, Py_ssize_t segment, const char **ptrptr)
+.. c:type:: Py_ssize_t (*charbufferproc) (PyObject *self, Py_ssize_t segment, const char **ptrptr)
 
    Return the size of the segment *segment* that *ptrptr*  is set to.  ``*ptrptr``
    is set to the memory buffer. Returns ``-1`` on error.
diff --git a/Doc/c-api/unicode.rst b/Doc/c-api/unicode.rst
index 8308304..73f6fe6 100644
--- a/Doc/c-api/unicode.rst
+++ b/Doc/c-api/unicode.rst
@@ -18,39 +18,39 @@
 Python:
 
 
-.. ctype:: Py_UNICODE
+.. c:type:: Py_UNICODE
 
    This type represents the storage type which is used by Python internally as
    basis for holding Unicode ordinals.  Python's default builds use a 16-bit type
-   for :ctype:`Py_UNICODE` and store Unicode values internally as UCS2. It is also
+   for :c:type:`Py_UNICODE` and store Unicode values internally as UCS2. It is also
    possible to build a UCS4 version of Python (most recent Linux distributions come
    with UCS4 builds of Python). These builds then use a 32-bit type for
-   :ctype:`Py_UNICODE` and store Unicode data internally as UCS4. On platforms
-   where :ctype:`wchar_t` is available and compatible with the chosen Python
-   Unicode build variant, :ctype:`Py_UNICODE` is a typedef alias for
-   :ctype:`wchar_t` to enhance native platform compatibility. On all other
-   platforms, :ctype:`Py_UNICODE` is a typedef alias for either :ctype:`unsigned
-   short` (UCS2) or :ctype:`unsigned long` (UCS4).
+   :c:type:`Py_UNICODE` and store Unicode data internally as UCS4. On platforms
+   where :c:type:`wchar_t` is available and compatible with the chosen Python
+   Unicode build variant, :c:type:`Py_UNICODE` is a typedef alias for
+   :c:type:`wchar_t` to enhance native platform compatibility. On all other
+   platforms, :c:type:`Py_UNICODE` is a typedef alias for either :c:type:`unsigned
+   short` (UCS2) or :c:type:`unsigned long` (UCS4).
 
 Note that UCS2 and UCS4 Python builds are not binary compatible. Please keep
 this in mind when writing extensions or interfaces.
 
 
-.. ctype:: PyUnicodeObject
+.. c:type:: PyUnicodeObject
 
-   This subtype of :ctype:`PyObject` represents a Python Unicode object.
+   This subtype of :c:type:`PyObject` represents a Python Unicode object.
 
 
-.. cvar:: PyTypeObject PyUnicode_Type
+.. c:var:: PyTypeObject PyUnicode_Type
 
-   This instance of :ctype:`PyTypeObject` represents the Python Unicode type.  It
+   This instance of :c:type:`PyTypeObject` represents the Python Unicode type.  It
    is exposed to Python code as ``unicode`` and ``types.UnicodeType``.
 
 The following APIs are really C macros and can be used to do fast checks and to
 access internal read-only data of Unicode objects:
 
 
-.. cfunction:: int PyUnicode_Check(PyObject *o)
+.. c:function:: int PyUnicode_Check(PyObject *o)
 
    Return true if the object *o* is a Unicode object or an instance of a Unicode
    subtype.
@@ -59,7 +59,7 @@
       Allowed subtypes to be accepted.
 
 
-.. cfunction:: int PyUnicode_CheckExact(PyObject *o)
+.. c:function:: int PyUnicode_CheckExact(PyObject *o)
 
    Return true if the object *o* is a Unicode object, but not an instance of a
    subtype.
@@ -67,39 +67,39 @@
    .. versionadded:: 2.2
 
 
-.. cfunction:: Py_ssize_t PyUnicode_GET_SIZE(PyObject *o)
+.. c:function:: Py_ssize_t PyUnicode_GET_SIZE(PyObject *o)
 
-   Return the size of the object.  *o* has to be a :ctype:`PyUnicodeObject` (not
+   Return the size of the object.  *o* has to be a :c:type:`PyUnicodeObject` (not
    checked).
 
    .. versionchanged:: 2.5
-      This function returned an :ctype:`int` type. This might require changes
+      This function returned an :c:type:`int` type. This might require changes
       in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: Py_ssize_t PyUnicode_GET_DATA_SIZE(PyObject *o)
+.. c:function:: Py_ssize_t PyUnicode_GET_DATA_SIZE(PyObject *o)
 
    Return the size of the object's internal buffer in bytes.  *o* has to be a
-   :ctype:`PyUnicodeObject` (not checked).
+   :c:type:`PyUnicodeObject` (not checked).
 
    .. versionchanged:: 2.5
-      This function returned an :ctype:`int` type. This might require changes
+      This function returned an :c:type:`int` type. This might require changes
       in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: Py_UNICODE* PyUnicode_AS_UNICODE(PyObject *o)
+.. c:function:: Py_UNICODE* PyUnicode_AS_UNICODE(PyObject *o)
 
-   Return a pointer to the internal :ctype:`Py_UNICODE` buffer of the object.  *o*
-   has to be a :ctype:`PyUnicodeObject` (not checked).
+   Return a pointer to the internal :c:type:`Py_UNICODE` buffer of the object.  *o*
+   has to be a :c:type:`PyUnicodeObject` (not checked).
 
 
-.. cfunction:: const char* PyUnicode_AS_DATA(PyObject *o)
+.. c:function:: const char* PyUnicode_AS_DATA(PyObject *o)
 
    Return a pointer to the internal buffer of the object. *o* has to be a
-   :ctype:`PyUnicodeObject` (not checked).
+   :c:type:`PyUnicodeObject` (not checked).
 
 
-.. cfunction:: int PyUnicode_ClearFreeList()
+.. c:function:: int PyUnicode_ClearFreeList()
 
    Clear the free list. Return the total number of freed items.
 
@@ -114,86 +114,86 @@
 the Python configuration.
 
 
-.. cfunction:: int Py_UNICODE_ISSPACE(Py_UNICODE ch)
+.. c:function:: int Py_UNICODE_ISSPACE(Py_UNICODE ch)
 
    Return 1 or 0 depending on whether *ch* is a whitespace character.
 
 
-.. cfunction:: int Py_UNICODE_ISLOWER(Py_UNICODE ch)
+.. c:function:: int Py_UNICODE_ISLOWER(Py_UNICODE ch)
 
    Return 1 or 0 depending on whether *ch* is a lowercase character.
 
 
-.. cfunction:: int Py_UNICODE_ISUPPER(Py_UNICODE ch)
+.. c:function:: int Py_UNICODE_ISUPPER(Py_UNICODE ch)
 
    Return 1 or 0 depending on whether *ch* is an uppercase character.
 
 
-.. cfunction:: int Py_UNICODE_ISTITLE(Py_UNICODE ch)
+.. c:function:: int Py_UNICODE_ISTITLE(Py_UNICODE ch)
 
    Return 1 or 0 depending on whether *ch* is a titlecase character.
 
 
-.. cfunction:: int Py_UNICODE_ISLINEBREAK(Py_UNICODE ch)
+.. c:function:: int Py_UNICODE_ISLINEBREAK(Py_UNICODE ch)
 
    Return 1 or 0 depending on whether *ch* is a linebreak character.
 
 
-.. cfunction:: int Py_UNICODE_ISDECIMAL(Py_UNICODE ch)
+.. c:function:: int Py_UNICODE_ISDECIMAL(Py_UNICODE ch)
 
    Return 1 or 0 depending on whether *ch* is a decimal character.
 
 
-.. cfunction:: int Py_UNICODE_ISDIGIT(Py_UNICODE ch)
+.. c:function:: int Py_UNICODE_ISDIGIT(Py_UNICODE ch)
 
    Return 1 or 0 depending on whether *ch* is a digit character.
 
 
-.. cfunction:: int Py_UNICODE_ISNUMERIC(Py_UNICODE ch)
+.. c:function:: int Py_UNICODE_ISNUMERIC(Py_UNICODE ch)
 
    Return 1 or 0 depending on whether *ch* is a numeric character.
 
 
-.. cfunction:: int Py_UNICODE_ISALPHA(Py_UNICODE ch)
+.. c:function:: int Py_UNICODE_ISALPHA(Py_UNICODE ch)
 
    Return 1 or 0 depending on whether *ch* is an alphabetic character.
 
 
-.. cfunction:: int Py_UNICODE_ISALNUM(Py_UNICODE ch)
+.. c:function:: int Py_UNICODE_ISALNUM(Py_UNICODE ch)
 
    Return 1 or 0 depending on whether *ch* is an alphanumeric character.
 
 These APIs can be used for fast direct character conversions:
 
 
-.. cfunction:: Py_UNICODE Py_UNICODE_TOLOWER(Py_UNICODE ch)
+.. c:function:: Py_UNICODE Py_UNICODE_TOLOWER(Py_UNICODE ch)
 
    Return the character *ch* converted to lower case.
 
 
-.. cfunction:: Py_UNICODE Py_UNICODE_TOUPPER(Py_UNICODE ch)
+.. c:function:: Py_UNICODE Py_UNICODE_TOUPPER(Py_UNICODE ch)
 
    Return the character *ch* converted to upper case.
 
 
-.. cfunction:: Py_UNICODE Py_UNICODE_TOTITLE(Py_UNICODE ch)
+.. c:function:: Py_UNICODE Py_UNICODE_TOTITLE(Py_UNICODE ch)
 
    Return the character *ch* converted to title case.
 
 
-.. cfunction:: int Py_UNICODE_TODECIMAL(Py_UNICODE ch)
+.. c:function:: int Py_UNICODE_TODECIMAL(Py_UNICODE ch)
 
    Return the character *ch* converted to a decimal positive integer.  Return
    ``-1`` if this is not possible.  This macro does not raise exceptions.
 
 
-.. cfunction:: int Py_UNICODE_TODIGIT(Py_UNICODE ch)
+.. c:function:: int Py_UNICODE_TODIGIT(Py_UNICODE ch)
 
    Return the character *ch* converted to a single digit integer. Return ``-1`` if
    this is not possible.  This macro does not raise exceptions.
 
 
-.. cfunction:: double Py_UNICODE_TONUMERIC(Py_UNICODE ch)
+.. c:function:: double Py_UNICODE_TONUMERIC(Py_UNICODE ch)
 
    Return the character *ch* converted to a double. Return ``-1.0`` if this is not
    possible.  This macro does not raise exceptions.
@@ -206,7 +206,7 @@
 APIs:
 
 
-.. cfunction:: PyObject* PyUnicode_FromUnicode(const Py_UNICODE *u, Py_ssize_t size)
+.. c:function:: PyObject* PyUnicode_FromUnicode(const Py_UNICODE *u, Py_ssize_t size)
 
    Create a Unicode object from the Py_UNICODE buffer *u* of the given size. *u*
    may be *NULL* which causes the contents to be undefined. It is the user's
@@ -216,11 +216,11 @@
    is *NULL*.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyUnicode_FromStringAndSize(const char *u, Py_ssize_t size)
+.. c:function:: PyObject* PyUnicode_FromStringAndSize(const char *u, Py_ssize_t size)
 
    Create a Unicode object from the char buffer *u*.  The bytes will be interpreted
    as being UTF-8 encoded.  *u* may also be *NULL* which
@@ -232,7 +232,7 @@
    .. versionadded:: 2.6
 
 
-.. cfunction:: PyObject *PyUnicode_FromString(const char *u)
+.. c:function:: PyObject *PyUnicode_FromString(const char *u)
 
    Create a Unicode object from an UTF-8 encoded null-terminated char buffer
    *u*.
@@ -240,9 +240,9 @@
    .. versionadded:: 2.6
 
 
-.. cfunction:: PyObject* PyUnicode_FromFormat(const char *format, ...)
+.. c:function:: PyObject* PyUnicode_FromFormat(const char *format, ...)
 
-   Take a C :cfunc:`printf`\ -style *format* string and a variable number of
+   Take a C :c:func:`printf`\ -style *format* string and a variable number of
    arguments, calculate the size of the resulting Python unicode string and return
    a string with the values formatted into it.  The variable arguments must be C
    types and must correspond exactly to the format characters in the *format*
@@ -317,7 +317,7 @@
    .. versionadded:: 2.6
 
 
-.. cfunction:: PyObject* PyUnicode_FromFormatV(const char *format, va_list vargs)
+.. c:function:: PyObject* PyUnicode_FromFormatV(const char *format, va_list vargs)
 
    Identical to :func:`PyUnicode_FromFormat` except that it takes exactly two
    arguments.
@@ -325,25 +325,25 @@
    .. versionadded:: 2.6
 
 
-.. cfunction:: Py_UNICODE* PyUnicode_AsUnicode(PyObject *unicode)
+.. c:function:: Py_UNICODE* PyUnicode_AsUnicode(PyObject *unicode)
 
    Return a read-only pointer to the Unicode object's internal
-   :ctype:`Py_UNICODE` buffer, *NULL* if *unicode* is not a Unicode object.
-   Note that the resulting :ctype:`Py_UNICODE*` string may contain embedded
+   :c:type:`Py_UNICODE` buffer, *NULL* if *unicode* is not a Unicode object.
+   Note that the resulting :c:type:`Py_UNICODE*` string may contain embedded
    null characters, which would cause the string to be truncated when used in
    most C functions.
 
 
-.. cfunction:: Py_ssize_t PyUnicode_GetSize(PyObject *unicode)
+.. c:function:: Py_ssize_t PyUnicode_GetSize(PyObject *unicode)
 
    Return the length of the Unicode object.
 
    .. versionchanged:: 2.5
-      This function returned an :ctype:`int` type. This might require changes
+      This function returned an :c:type:`int` type. This might require changes
       in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyUnicode_FromEncodedObject(PyObject *obj, const char *encoding, const char *errors)
+.. c:function:: PyObject* PyUnicode_FromEncodedObject(PyObject *obj, const char *encoding, const char *errors)
 
    Coerce an encoded object *obj* to an Unicode object and return a reference with
    incremented refcount.
@@ -360,46 +360,46 @@
    decref'ing the returned objects.
 
 
-.. cfunction:: PyObject* PyUnicode_FromObject(PyObject *obj)
+.. c:function:: PyObject* PyUnicode_FromObject(PyObject *obj)
 
    Shortcut for ``PyUnicode_FromEncodedObject(obj, NULL, "strict")`` which is used
    throughout the interpreter whenever coercion to Unicode is needed.
 
-If the platform supports :ctype:`wchar_t` and provides a header file wchar.h,
+If the platform supports :c:type:`wchar_t` and provides a header file wchar.h,
 Python can interface directly to this type using the following functions.
-Support is optimized if Python's own :ctype:`Py_UNICODE` type is identical to
-the system's :ctype:`wchar_t`.
+Support is optimized if Python's own :c:type:`Py_UNICODE` type is identical to
+the system's :c:type:`wchar_t`.
 
 
 wchar_t Support
 """""""""""""""
 
-:ctype:`wchar_t` support for platforms which support it:
+:c:type:`wchar_t` support for platforms which support it:
 
-.. cfunction:: PyObject* PyUnicode_FromWideChar(const wchar_t *w, Py_ssize_t size)
+.. c:function:: PyObject* PyUnicode_FromWideChar(const wchar_t *w, Py_ssize_t size)
 
-   Create a Unicode object from the :ctype:`wchar_t` buffer *w* of the given *size*.
+   Create a Unicode object from the :c:type:`wchar_t` buffer *w* of the given *size*.
    Return *NULL* on failure.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: Py_ssize_t PyUnicode_AsWideChar(PyUnicodeObject *unicode, wchar_t *w, Py_ssize_t size)
+.. c:function:: Py_ssize_t PyUnicode_AsWideChar(PyUnicodeObject *unicode, wchar_t *w, Py_ssize_t size)
 
-   Copy the Unicode object contents into the :ctype:`wchar_t` buffer *w*.  At most
-   *size* :ctype:`wchar_t` characters are copied (excluding a possibly trailing
-   0-termination character).  Return the number of :ctype:`wchar_t` characters
-   copied or -1 in case of an error.  Note that the resulting :ctype:`wchar_t`
+   Copy the Unicode object contents into the :c:type:`wchar_t` buffer *w*.  At most
+   *size* :c:type:`wchar_t` characters are copied (excluding a possibly trailing
+   0-termination character).  Return the number of :c:type:`wchar_t` characters
+   copied or -1 in case of an error.  Note that the resulting :c:type:`wchar_t`
    string may or may not be 0-terminated.  It is the responsibility of the caller
-   to make sure that the :ctype:`wchar_t` string is 0-terminated in case this is
-   required by the application. Also, note that the :ctype:`wchar_t*` string
+   to make sure that the :c:type:`wchar_t` string is 0-terminated in case this is
+   required by the application. Also, note that the :c:type:`wchar_t*` string
    might contain null characters, which would cause the string to be truncated
    when used with most C functions.
 
    .. versionchanged:: 2.5
-      This function returned an :ctype:`int` type and used an :ctype:`int`
+      This function returned an :c:type:`int` type and used an :c:type:`int`
       type for *size*. This might require changes in your code for properly
       supporting 64-bit systems.
 
@@ -417,7 +417,7 @@
 object constructor.
 
 Setting encoding to *NULL* causes the default encoding to be used which is
-ASCII.  The file system calls should use :cdata:`Py_FileSystemDefaultEncoding`
+ASCII.  The file system calls should use :c:data:`Py_FileSystemDefaultEncoding`
 as the encoding for file names. This variable should be treated as read-only: on
 some systems, it will be a pointer to a static string, on others, it will change
 at run-time (such as when the application invokes setlocale).
@@ -436,7 +436,7 @@
 These are the generic codec APIs:
 
 
-.. cfunction:: PyObject* PyUnicode_Decode(const char *s, Py_ssize_t size, const char *encoding, const char *errors)
+.. c:function:: PyObject* PyUnicode_Decode(const char *s, Py_ssize_t size, const char *encoding, const char *errors)
 
    Create a Unicode object by decoding *size* bytes of the encoded string *s*.
    *encoding* and *errors* have the same meaning as the parameters of the same name
@@ -445,24 +445,24 @@
    the codec.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyUnicode_Encode(const Py_UNICODE *s, Py_ssize_t size, const char *encoding, const char *errors)
+.. c:function:: PyObject* PyUnicode_Encode(const Py_UNICODE *s, Py_ssize_t size, const char *encoding, const char *errors)
 
-   Encode the :ctype:`Py_UNICODE` buffer *s* of the given *size* and return a Python
+   Encode the :c:type:`Py_UNICODE` buffer *s* of the given *size* and return a Python
    string object.  *encoding* and *errors* have the same meaning as the parameters
    of the same name in the Unicode :meth:`encode` method.  The codec to be used is
    looked up using the Python codec registry.  Return *NULL* if an exception was
    raised by the codec.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyUnicode_AsEncodedString(PyObject *unicode, const char *encoding, const char *errors)
+.. c:function:: PyObject* PyUnicode_AsEncodedString(PyObject *unicode, const char *encoding, const char *errors)
 
    Encode a Unicode object and return the result as Python string object.
    *encoding* and *errors* have the same meaning as the parameters of the same name
@@ -477,19 +477,19 @@
 These are the UTF-8 codec APIs:
 
 
-.. cfunction:: PyObject* PyUnicode_DecodeUTF8(const char *s, Py_ssize_t size, const char *errors)
+.. c:function:: PyObject* PyUnicode_DecodeUTF8(const char *s, Py_ssize_t size, const char *errors)
 
    Create a Unicode object by decoding *size* bytes of the UTF-8 encoded string
    *s*. Return *NULL* if an exception was raised by the codec.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyUnicode_DecodeUTF8Stateful(const char *s, Py_ssize_t size, const char *errors, Py_ssize_t *consumed)
+.. c:function:: PyObject* PyUnicode_DecodeUTF8Stateful(const char *s, Py_ssize_t size, const char *errors, Py_ssize_t *consumed)
 
-   If *consumed* is *NULL*, behave like :cfunc:`PyUnicode_DecodeUTF8`. If
+   If *consumed* is *NULL*, behave like :c:func:`PyUnicode_DecodeUTF8`. If
    *consumed* is not *NULL*, trailing incomplete UTF-8 byte sequences will not be
    treated as an error. Those bytes will not be decoded and the number of bytes
    that have been decoded will be stored in *consumed*.
@@ -497,21 +497,21 @@
    .. versionadded:: 2.4
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyUnicode_EncodeUTF8(const Py_UNICODE *s, Py_ssize_t size, const char *errors)
+.. c:function:: PyObject* PyUnicode_EncodeUTF8(const Py_UNICODE *s, Py_ssize_t size, const char *errors)
 
-   Encode the :ctype:`Py_UNICODE` buffer *s* of the given *size* using UTF-8 and return a
+   Encode the :c:type:`Py_UNICODE` buffer *s* of the given *size* using UTF-8 and return a
    Python string object.  Return *NULL* if an exception was raised by the codec.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyUnicode_AsUTF8String(PyObject *unicode)
+.. c:function:: PyObject* PyUnicode_AsUTF8String(PyObject *unicode)
 
    Encode a Unicode object using UTF-8 and return the result as Python string
    object.  Error handling is "strict".  Return *NULL* if an exception was raised
@@ -524,7 +524,7 @@
 These are the UTF-32 codec APIs:
 
 
-.. cfunction:: PyObject* PyUnicode_DecodeUTF32(const char *s, Py_ssize_t size, const char *errors, int *byteorder)
+.. c:function:: PyObject* PyUnicode_DecodeUTF32(const char *s, Py_ssize_t size, const char *errors, int *byteorder)
 
    Decode *size* bytes from a UTF-32 encoded buffer string and return the
    corresponding Unicode object.  *errors* (if non-*NULL*) defines the error
@@ -554,10 +554,10 @@
    .. versionadded:: 2.6
 
 
-.. cfunction:: PyObject* PyUnicode_DecodeUTF32Stateful(const char *s, Py_ssize_t size, const char *errors, int *byteorder, Py_ssize_t *consumed)
+.. c:function:: PyObject* PyUnicode_DecodeUTF32Stateful(const char *s, Py_ssize_t size, const char *errors, int *byteorder, Py_ssize_t *consumed)
 
-   If *consumed* is *NULL*, behave like :cfunc:`PyUnicode_DecodeUTF32`. If
-   *consumed* is not *NULL*, :cfunc:`PyUnicode_DecodeUTF32Stateful` will not treat
+   If *consumed* is *NULL*, behave like :c:func:`PyUnicode_DecodeUTF32`. If
+   *consumed* is not *NULL*, :c:func:`PyUnicode_DecodeUTF32Stateful` will not treat
    trailing incomplete UTF-32 byte sequences (such as a number of bytes not divisible
    by four) as an error. Those bytes will not be decoded and the number of bytes
    that have been decoded will be stored in *consumed*.
@@ -565,7 +565,7 @@
    .. versionadded:: 2.6
 
 
-.. cfunction:: PyObject* PyUnicode_EncodeUTF32(const Py_UNICODE *s, Py_ssize_t size, const char *errors, int byteorder)
+.. c:function:: PyObject* PyUnicode_EncodeUTF32(const Py_UNICODE *s, Py_ssize_t size, const char *errors, int byteorder)
 
    Return a Python bytes object holding the UTF-32 encoded value of the Unicode
    data in *s*.  Output is written according to the following byte order::
@@ -585,7 +585,7 @@
    .. versionadded:: 2.6
 
 
-.. cfunction:: PyObject* PyUnicode_AsUTF32String(PyObject *unicode)
+.. c:function:: PyObject* PyUnicode_AsUTF32String(PyObject *unicode)
 
    Return a Python string using the UTF-32 encoding in native byte order. The
    string always starts with a BOM mark.  Error handling is "strict".  Return
@@ -600,7 +600,7 @@
 These are the UTF-16 codec APIs:
 
 
-.. cfunction:: PyObject* PyUnicode_DecodeUTF16(const char *s, Py_ssize_t size, const char *errors, int *byteorder)
+.. c:function:: PyObject* PyUnicode_DecodeUTF16(const char *s, Py_ssize_t size, const char *errors, int *byteorder)
 
    Decode *size* bytes from a UTF-16 encoded buffer string and return the
    corresponding Unicode object.  *errors* (if non-*NULL*) defines the error
@@ -627,14 +627,14 @@
    Return *NULL* if an exception was raised by the codec.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyUnicode_DecodeUTF16Stateful(const char *s, Py_ssize_t size, const char *errors, int *byteorder, Py_ssize_t *consumed)
+.. c:function:: PyObject* PyUnicode_DecodeUTF16Stateful(const char *s, Py_ssize_t size, const char *errors, int *byteorder, Py_ssize_t *consumed)
 
-   If *consumed* is *NULL*, behave like :cfunc:`PyUnicode_DecodeUTF16`. If
-   *consumed* is not *NULL*, :cfunc:`PyUnicode_DecodeUTF16Stateful` will not treat
+   If *consumed* is *NULL*, behave like :c:func:`PyUnicode_DecodeUTF16`. If
+   *consumed* is not *NULL*, :c:func:`PyUnicode_DecodeUTF16Stateful` will not treat
    trailing incomplete UTF-16 byte sequences (such as an odd number of bytes or a
    split surrogate pair) as an error. Those bytes will not be decoded and the
    number of bytes that have been decoded will be stored in *consumed*.
@@ -642,12 +642,12 @@
    .. versionadded:: 2.4
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size* and an :ctype:`int *`
+      This function used an :c:type:`int` type for *size* and an :c:type:`int *`
       type for *consumed*. This might require changes in your code for
       properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyUnicode_EncodeUTF16(const Py_UNICODE *s, Py_ssize_t size, const char *errors, int byteorder)
+.. c:function:: PyObject* PyUnicode_EncodeUTF16(const Py_UNICODE *s, Py_ssize_t size, const char *errors, int byteorder)
 
    Return a Python string object holding the UTF-16 encoded value of the Unicode
    data in *s*.  Output is written according to the following byte order::
@@ -659,18 +659,18 @@
    If byteorder is ``0``, the output string will always start with the Unicode BOM
    mark (U+FEFF). In the other two modes, no BOM mark is prepended.
 
-   If *Py_UNICODE_WIDE* is defined, a single :ctype:`Py_UNICODE` value may get
-   represented as a surrogate pair. If it is not defined, each :ctype:`Py_UNICODE`
+   If *Py_UNICODE_WIDE* is defined, a single :c:type:`Py_UNICODE` value may get
+   represented as a surrogate pair. If it is not defined, each :c:type:`Py_UNICODE`
    values is interpreted as an UCS-2 character.
 
    Return *NULL* if an exception was raised by the codec.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyUnicode_AsUTF16String(PyObject *unicode)
+.. c:function:: PyObject* PyUnicode_AsUTF16String(PyObject *unicode)
 
    Return a Python string using the UTF-16 encoding in native byte order. The
    string always starts with a BOM mark.  Error handling is "strict".  Return
@@ -683,23 +683,23 @@
 These are the UTF-7 codec APIs:
 
 
-.. cfunction:: PyObject* PyUnicode_DecodeUTF7(const char *s, Py_ssize_t size, const char *errors)
+.. c:function:: PyObject* PyUnicode_DecodeUTF7(const char *s, Py_ssize_t size, const char *errors)
 
    Create a Unicode object by decoding *size* bytes of the UTF-7 encoded string
    *s*.  Return *NULL* if an exception was raised by the codec.
 
 
-.. cfunction:: PyObject* PyUnicode_DecodeUTF7Stateful(const char *s, Py_ssize_t size, const char *errors, Py_ssize_t *consumed)
+.. c:function:: PyObject* PyUnicode_DecodeUTF7Stateful(const char *s, Py_ssize_t size, const char *errors, Py_ssize_t *consumed)
 
-   If *consumed* is *NULL*, behave like :cfunc:`PyUnicode_DecodeUTF7`.  If
+   If *consumed* is *NULL*, behave like :c:func:`PyUnicode_DecodeUTF7`.  If
    *consumed* is not *NULL*, trailing incomplete UTF-7 base-64 sections will not
    be treated as an error.  Those bytes will not be decoded and the number of
    bytes that have been decoded will be stored in *consumed*.
 
 
-.. cfunction:: PyObject* PyUnicode_EncodeUTF7(const Py_UNICODE *s, Py_ssize_t size, int base64SetO, int base64WhiteSpace, const char *errors)
+.. c:function:: PyObject* PyUnicode_EncodeUTF7(const Py_UNICODE *s, Py_ssize_t size, int base64SetO, int base64WhiteSpace, const char *errors)
 
-   Encode the :ctype:`Py_UNICODE` buffer of the given size using UTF-7 and
+   Encode the :c:type:`Py_UNICODE` buffer of the given size using UTF-7 and
    return a Python bytes object.  Return *NULL* if an exception was raised by
    the codec.
 
@@ -715,28 +715,28 @@
 These are the "Unicode Escape" codec APIs:
 
 
-.. cfunction:: PyObject* PyUnicode_DecodeUnicodeEscape(const char *s, Py_ssize_t size, const char *errors)
+.. c:function:: PyObject* PyUnicode_DecodeUnicodeEscape(const char *s, Py_ssize_t size, const char *errors)
 
    Create a Unicode object by decoding *size* bytes of the Unicode-Escape encoded
    string *s*.  Return *NULL* if an exception was raised by the codec.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyUnicode_EncodeUnicodeEscape(const Py_UNICODE *s, Py_ssize_t size)
+.. c:function:: PyObject* PyUnicode_EncodeUnicodeEscape(const Py_UNICODE *s, Py_ssize_t size)
 
-   Encode the :ctype:`Py_UNICODE` buffer of the given *size* using Unicode-Escape and
+   Encode the :c:type:`Py_UNICODE` buffer of the given *size* using Unicode-Escape and
    return a Python string object.  Return *NULL* if an exception was raised by the
    codec.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyUnicode_AsUnicodeEscapeString(PyObject *unicode)
+.. c:function:: PyObject* PyUnicode_AsUnicodeEscapeString(PyObject *unicode)
 
    Encode a Unicode object using Unicode-Escape and return the result as Python
    string object.  Error handling is "strict". Return *NULL* if an exception was
@@ -749,28 +749,28 @@
 These are the "Raw Unicode Escape" codec APIs:
 
 
-.. cfunction:: PyObject* PyUnicode_DecodeRawUnicodeEscape(const char *s, Py_ssize_t size, const char *errors)
+.. c:function:: PyObject* PyUnicode_DecodeRawUnicodeEscape(const char *s, Py_ssize_t size, const char *errors)
 
    Create a Unicode object by decoding *size* bytes of the Raw-Unicode-Escape
    encoded string *s*.  Return *NULL* if an exception was raised by the codec.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyUnicode_EncodeRawUnicodeEscape(const Py_UNICODE *s, Py_ssize_t size, const char *errors)
+.. c:function:: PyObject* PyUnicode_EncodeRawUnicodeEscape(const Py_UNICODE *s, Py_ssize_t size, const char *errors)
 
-   Encode the :ctype:`Py_UNICODE` buffer of the given *size* using Raw-Unicode-Escape
+   Encode the :c:type:`Py_UNICODE` buffer of the given *size* using Raw-Unicode-Escape
    and return a Python string object.  Return *NULL* if an exception was raised by
    the codec.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyUnicode_AsRawUnicodeEscapeString(PyObject *unicode)
+.. c:function:: PyObject* PyUnicode_AsRawUnicodeEscapeString(PyObject *unicode)
 
    Encode a Unicode object using Raw-Unicode-Escape and return the result as
    Python string object. Error handling is "strict". Return *NULL* if an exception
@@ -784,27 +784,27 @@
 ordinals and only these are accepted by the codecs during encoding.
 
 
-.. cfunction:: PyObject* PyUnicode_DecodeLatin1(const char *s, Py_ssize_t size, const char *errors)
+.. c:function:: PyObject* PyUnicode_DecodeLatin1(const char *s, Py_ssize_t size, const char *errors)
 
    Create a Unicode object by decoding *size* bytes of the Latin-1 encoded string
    *s*.  Return *NULL* if an exception was raised by the codec.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyUnicode_EncodeLatin1(const Py_UNICODE *s, Py_ssize_t size, const char *errors)
+.. c:function:: PyObject* PyUnicode_EncodeLatin1(const Py_UNICODE *s, Py_ssize_t size, const char *errors)
 
-   Encode the :ctype:`Py_UNICODE` buffer of the given *size* using Latin-1 and return
+   Encode the :c:type:`Py_UNICODE` buffer of the given *size* using Latin-1 and return
    a Python string object.  Return *NULL* if an exception was raised by the codec.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyUnicode_AsLatin1String(PyObject *unicode)
+.. c:function:: PyObject* PyUnicode_AsLatin1String(PyObject *unicode)
 
    Encode a Unicode object using Latin-1 and return the result as Python string
    object.  Error handling is "strict".  Return *NULL* if an exception was raised
@@ -818,27 +818,27 @@
 codes generate errors.
 
 
-.. cfunction:: PyObject* PyUnicode_DecodeASCII(const char *s, Py_ssize_t size, const char *errors)
+.. c:function:: PyObject* PyUnicode_DecodeASCII(const char *s, Py_ssize_t size, const char *errors)
 
    Create a Unicode object by decoding *size* bytes of the ASCII encoded string
    *s*.  Return *NULL* if an exception was raised by the codec.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyUnicode_EncodeASCII(const Py_UNICODE *s, Py_ssize_t size, const char *errors)
+.. c:function:: PyObject* PyUnicode_EncodeASCII(const Py_UNICODE *s, Py_ssize_t size, const char *errors)
 
-   Encode the :ctype:`Py_UNICODE` buffer of the given *size* using ASCII and return a
+   Encode the :c:type:`Py_UNICODE` buffer of the given *size* using ASCII and return a
    Python string object.  Return *NULL* if an exception was raised by the codec.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyUnicode_AsASCIIString(PyObject *unicode)
+.. c:function:: PyObject* PyUnicode_AsASCIIString(PyObject *unicode)
 
    Encode a Unicode object using ASCII and return the result as Python string
    object.  Error handling is "strict".  Return *NULL* if an exception was raised
@@ -871,7 +871,7 @@
 
 These are the mapping codec APIs:
 
-.. cfunction:: PyObject* PyUnicode_DecodeCharmap(const char *s, Py_ssize_t size, PyObject *mapping, const char *errors)
+.. c:function:: PyObject* PyUnicode_DecodeCharmap(const char *s, Py_ssize_t size, PyObject *mapping, const char *errors)
 
    Create a Unicode object by decoding *size* bytes of the encoded string *s* using
    the given *mapping* object.  Return *NULL* if an exception was raised by the
@@ -884,22 +884,22 @@
       Allowed unicode string as mapping argument.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyUnicode_EncodeCharmap(const Py_UNICODE *s, Py_ssize_t size, PyObject *mapping, const char *errors)
+.. c:function:: PyObject* PyUnicode_EncodeCharmap(const Py_UNICODE *s, Py_ssize_t size, PyObject *mapping, const char *errors)
 
-   Encode the :ctype:`Py_UNICODE` buffer of the given *size* using the given
+   Encode the :c:type:`Py_UNICODE` buffer of the given *size* using the given
    *mapping* object and return a Python string object. Return *NULL* if an
    exception was raised by the codec.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyUnicode_AsCharmapString(PyObject *unicode, PyObject *mapping)
+.. c:function:: PyObject* PyUnicode_AsCharmapString(PyObject *unicode, PyObject *mapping)
 
    Encode a Unicode object using the given *mapping* object and return the result
    as Python string object.  Error handling is "strict".  Return *NULL* if an
@@ -908,9 +908,9 @@
 The following codec API is special in that maps Unicode to Unicode.
 
 
-.. cfunction:: PyObject* PyUnicode_TranslateCharmap(const Py_UNICODE *s, Py_ssize_t size, PyObject *table, const char *errors)
+.. c:function:: PyObject* PyUnicode_TranslateCharmap(const Py_UNICODE *s, Py_ssize_t size, PyObject *table, const char *errors)
 
-   Translate a :ctype:`Py_UNICODE` buffer of the given *size* by applying a
+   Translate a :c:type:`Py_UNICODE` buffer of the given *size* by applying a
    character mapping *table* to it and return the resulting Unicode object.  Return
    *NULL* when an exception was raised by the codec.
 
@@ -922,7 +922,7 @@
    :exc:`LookupError`) are left untouched and are copied as-is.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
@@ -935,37 +935,37 @@
 the user settings on the machine running the codec.
 
 
-.. cfunction:: PyObject* PyUnicode_DecodeMBCS(const char *s, Py_ssize_t size, const char *errors)
+.. c:function:: PyObject* PyUnicode_DecodeMBCS(const char *s, Py_ssize_t size, const char *errors)
 
    Create a Unicode object by decoding *size* bytes of the MBCS encoded string *s*.
    Return *NULL* if an exception was raised by the codec.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyUnicode_DecodeMBCSStateful(const char *s, int size, const char *errors, int *consumed)
+.. c:function:: PyObject* PyUnicode_DecodeMBCSStateful(const char *s, int size, const char *errors, int *consumed)
 
-   If *consumed* is *NULL*, behave like :cfunc:`PyUnicode_DecodeMBCS`. If
-   *consumed* is not *NULL*, :cfunc:`PyUnicode_DecodeMBCSStateful` will not decode
+   If *consumed* is *NULL*, behave like :c:func:`PyUnicode_DecodeMBCS`. If
+   *consumed* is not *NULL*, :c:func:`PyUnicode_DecodeMBCSStateful` will not decode
    trailing lead byte and the number of bytes that have been decoded will be stored
    in *consumed*.
 
    .. versionadded:: 2.5
 
 
-.. cfunction:: PyObject* PyUnicode_EncodeMBCS(const Py_UNICODE *s, Py_ssize_t size, const char *errors)
+.. c:function:: PyObject* PyUnicode_EncodeMBCS(const Py_UNICODE *s, Py_ssize_t size, const char *errors)
 
-   Encode the :ctype:`Py_UNICODE` buffer of the given *size* using MBCS and return a
+   Encode the :c:type:`Py_UNICODE` buffer of the given *size* using MBCS and return a
    Python string object.  Return *NULL* if an exception was raised by the codec.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *size*. This might require
+      This function used an :c:type:`int` type for *size*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyUnicode_AsMBCSString(PyObject *unicode)
+.. c:function:: PyObject* PyUnicode_AsMBCSString(PyObject *unicode)
 
    Encode a Unicode object using MBCS and return the result as Python string
    object.  Error handling is "strict".  Return *NULL* if an exception was raised
@@ -987,12 +987,12 @@
 They all return *NULL* or ``-1`` if an exception occurs.
 
 
-.. cfunction:: PyObject* PyUnicode_Concat(PyObject *left, PyObject *right)
+.. c:function:: PyObject* PyUnicode_Concat(PyObject *left, PyObject *right)
 
    Concat two strings giving a new Unicode string.
 
 
-.. cfunction:: PyObject* PyUnicode_Split(PyObject *s, PyObject *sep, Py_ssize_t maxsplit)
+.. c:function:: PyObject* PyUnicode_Split(PyObject *s, PyObject *sep, Py_ssize_t maxsplit)
 
    Split a string giving a list of Unicode strings.  If *sep* is *NULL*, splitting
    will be done at all whitespace substrings.  Otherwise, splits occur at the given
@@ -1000,18 +1000,18 @@
    set.  Separators are not included in the resulting list.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *maxsplit*. This might require
+      This function used an :c:type:`int` type for *maxsplit*. This might require
       changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyUnicode_Splitlines(PyObject *s, int keepend)
+.. c:function:: PyObject* PyUnicode_Splitlines(PyObject *s, int keepend)
 
    Split a Unicode string at line breaks, returning a list of Unicode strings.
    CRLF is considered to be one line break.  If *keepend* is 0, the Line break
    characters are not included in the resulting strings.
 
 
-.. cfunction:: PyObject* PyUnicode_Translate(PyObject *str, PyObject *table, const char *errors)
+.. c:function:: PyObject* PyUnicode_Translate(PyObject *str, PyObject *table, const char *errors)
 
    Translate a string by applying a character mapping table to it and return the
    resulting Unicode object.
@@ -1027,25 +1027,25 @@
    use the default error handling.
 
 
-.. cfunction:: PyObject* PyUnicode_Join(PyObject *separator, PyObject *seq)
+.. c:function:: PyObject* PyUnicode_Join(PyObject *separator, PyObject *seq)
 
    Join a sequence of strings using the given *separator* and return the resulting
    Unicode string.
 
 
-.. cfunction:: int PyUnicode_Tailmatch(PyObject *str, PyObject *substr, Py_ssize_t start, Py_ssize_t end, int direction)
+.. c:function:: int PyUnicode_Tailmatch(PyObject *str, PyObject *substr, Py_ssize_t start, Py_ssize_t end, int direction)
 
    Return 1 if *substr* matches ``str[start:end]`` at the given tail end
    (*direction* == -1 means to do a prefix match, *direction* == 1 a suffix match),
    0 otherwise. Return ``-1`` if an error occurred.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *start* and *end*. This
+      This function used an :c:type:`int` type for *start* and *end*. This
       might require changes in your code for properly supporting 64-bit
       systems.
 
 
-.. cfunction:: Py_ssize_t PyUnicode_Find(PyObject *str, PyObject *substr, Py_ssize_t start, Py_ssize_t end, int direction)
+.. c:function:: Py_ssize_t PyUnicode_Find(PyObject *str, PyObject *substr, Py_ssize_t start, Py_ssize_t end, int direction)
 
    Return the first position of *substr* in ``str[start:end]`` using the given
    *direction* (*direction* == 1 means to do a forward search, *direction* == -1 a
@@ -1054,40 +1054,40 @@
    occurred and an exception has been set.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *start* and *end*. This
+      This function used an :c:type:`int` type for *start* and *end*. This
       might require changes in your code for properly supporting 64-bit
       systems.
 
 
-.. cfunction:: Py_ssize_t PyUnicode_Count(PyObject *str, PyObject *substr, Py_ssize_t start, Py_ssize_t end)
+.. c:function:: Py_ssize_t PyUnicode_Count(PyObject *str, PyObject *substr, Py_ssize_t start, Py_ssize_t end)
 
    Return the number of non-overlapping occurrences of *substr* in
    ``str[start:end]``.  Return ``-1`` if an error occurred.
 
    .. versionchanged:: 2.5
-      This function returned an :ctype:`int` type and used an :ctype:`int`
+      This function returned an :c:type:`int` type and used an :c:type:`int`
       type for *start* and *end*. This might require changes in your code for
       properly supporting 64-bit systems.
 
 
-.. cfunction:: PyObject* PyUnicode_Replace(PyObject *str, PyObject *substr, PyObject *replstr, Py_ssize_t maxcount)
+.. c:function:: PyObject* PyUnicode_Replace(PyObject *str, PyObject *substr, PyObject *replstr, Py_ssize_t maxcount)
 
    Replace at most *maxcount* occurrences of *substr* in *str* with *replstr* and
    return the resulting Unicode object. *maxcount* == -1 means replace all
    occurrences.
 
    .. versionchanged:: 2.5
-      This function used an :ctype:`int` type for *maxcount*. This might
+      This function used an :c:type:`int` type for *maxcount*. This might
       require changes in your code for properly supporting 64-bit systems.
 
 
-.. cfunction:: int PyUnicode_Compare(PyObject *left, PyObject *right)
+.. c:function:: int PyUnicode_Compare(PyObject *left, PyObject *right)
 
    Compare two strings and return -1, 0, 1 for less than, equal, and greater than,
    respectively.
 
 
-.. cfunction:: int PyUnicode_RichCompare(PyObject *left,  PyObject *right,  int op)
+.. c:function:: int PyUnicode_RichCompare(PyObject *left,  PyObject *right,  int op)
 
    Rich compare two unicode strings and return one of the following:
 
@@ -1103,13 +1103,13 @@
    :const:`Py_NE`, :const:`Py_LT`, and :const:`Py_LE`.
 
 
-.. cfunction:: PyObject* PyUnicode_Format(PyObject *format, PyObject *args)
+.. c:function:: PyObject* PyUnicode_Format(PyObject *format, PyObject *args)
 
    Return a new string object from *format* and *args*; this is analogous to
    ``format % args``.  The *args* argument must be a tuple.
 
 
-.. cfunction:: int PyUnicode_Contains(PyObject *container, PyObject *element)
+.. c:function:: int PyUnicode_Contains(PyObject *container, PyObject *element)
 
    Check whether *element* is contained in *container* and return true or false
    accordingly.
diff --git a/Doc/c-api/veryhigh.rst b/Doc/c-api/veryhigh.rst
index 188fac8..4ce3b03 100644
--- a/Doc/c-api/veryhigh.rst
+++ b/Doc/c-api/veryhigh.rst
@@ -16,20 +16,20 @@
 :const:`Py_file_input`, and :const:`Py_single_input`.  These are described
 following the functions which accept them as parameters.
 
-Note also that several of these functions take :ctype:`FILE\*` parameters.  One
-particular issue which needs to be handled carefully is that the :ctype:`FILE`
+Note also that several of these functions take :c:type:`FILE\*` parameters.  One
+particular issue which needs to be handled carefully is that the :c:type:`FILE`
 structure for different C libraries can be different and incompatible.  Under
 Windows (at least), it is possible for dynamically linked extensions to actually
-use different libraries, so care should be taken that :ctype:`FILE\*` parameters
+use different libraries, so care should be taken that :c:type:`FILE\*` parameters
 are only passed to these functions if it is certain that they were created by
 the same library that the Python runtime is using.
 
 
-.. cfunction:: int Py_Main(int argc, char **argv)
+.. c:function:: int Py_Main(int argc, char **argv)
 
    The main program for the standard interpreter.  This is made available for
    programs which embed Python.  The *argc* and *argv* parameters should be
-   prepared exactly as those which are passed to a C program's :cfunc:`main`
+   prepared exactly as those which are passed to a C program's :c:func:`main`
    function.  It is important to note that the argument list may be modified (but
    the contents of the strings pointed to by the argument list are not). The return
    value will be ``0`` if the interpreter exits normally (ie, without an
@@ -41,40 +41,40 @@
    ``Py_InspectFlag`` is not set.
 
 
-.. cfunction:: int PyRun_AnyFile(FILE *fp, const char *filename)
+.. c:function:: int PyRun_AnyFile(FILE *fp, const char *filename)
 
-   This is a simplified interface to :cfunc:`PyRun_AnyFileExFlags` below, leaving
+   This is a simplified interface to :c:func:`PyRun_AnyFileExFlags` below, leaving
    *closeit* set to ``0`` and *flags* set to *NULL*.
 
 
-.. cfunction:: int PyRun_AnyFileFlags(FILE *fp, const char *filename, PyCompilerFlags *flags)
+.. c:function:: int PyRun_AnyFileFlags(FILE *fp, const char *filename, PyCompilerFlags *flags)
 
-   This is a simplified interface to :cfunc:`PyRun_AnyFileExFlags` below, leaving
+   This is a simplified interface to :c:func:`PyRun_AnyFileExFlags` below, leaving
    the *closeit* argument set to ``0``.
 
 
-.. cfunction:: int PyRun_AnyFileEx(FILE *fp, const char *filename, int closeit)
+.. c:function:: int PyRun_AnyFileEx(FILE *fp, const char *filename, int closeit)
 
-   This is a simplified interface to :cfunc:`PyRun_AnyFileExFlags` below, leaving
+   This is a simplified interface to :c:func:`PyRun_AnyFileExFlags` below, leaving
    the *flags* argument set to *NULL*.
 
 
-.. cfunction:: int PyRun_AnyFileExFlags(FILE *fp, const char *filename, int closeit, PyCompilerFlags *flags)
+.. c:function:: int PyRun_AnyFileExFlags(FILE *fp, const char *filename, int closeit, PyCompilerFlags *flags)
 
    If *fp* refers to a file associated with an interactive device (console or
    terminal input or Unix pseudo-terminal), return the value of
-   :cfunc:`PyRun_InteractiveLoop`, otherwise return the result of
-   :cfunc:`PyRun_SimpleFile`.  If *filename* is *NULL*, this function uses
+   :c:func:`PyRun_InteractiveLoop`, otherwise return the result of
+   :c:func:`PyRun_SimpleFile`.  If *filename* is *NULL*, this function uses
    ``"???"`` as the filename.
 
 
-.. cfunction:: int PyRun_SimpleString(const char *command)
+.. c:function:: int PyRun_SimpleString(const char *command)
 
-   This is a simplified interface to :cfunc:`PyRun_SimpleStringFlags` below,
+   This is a simplified interface to :c:func:`PyRun_SimpleStringFlags` below,
    leaving the *PyCompilerFlags\** argument set to NULL.
 
 
-.. cfunction:: int PyRun_SimpleStringFlags(const char *command, PyCompilerFlags *flags)
+.. c:function:: int PyRun_SimpleStringFlags(const char *command, PyCompilerFlags *flags)
 
    Executes the Python source code from *command* in the :mod:`__main__` module
    according to the *flags* argument. If :mod:`__main__` does not already exist, it
@@ -87,39 +87,39 @@
    ``Py_InspectFlag`` is not set.
 
 
-.. cfunction:: int PyRun_SimpleFile(FILE *fp, const char *filename)
+.. c:function:: int PyRun_SimpleFile(FILE *fp, const char *filename)
 
-   This is a simplified interface to :cfunc:`PyRun_SimpleFileExFlags` below,
+   This is a simplified interface to :c:func:`PyRun_SimpleFileExFlags` below,
    leaving *closeit* set to ``0`` and *flags* set to *NULL*.
 
 
-.. cfunction:: int PyRun_SimpleFileFlags(FILE *fp, const char *filename, PyCompilerFlags *flags)
+.. c:function:: int PyRun_SimpleFileFlags(FILE *fp, const char *filename, PyCompilerFlags *flags)
 
-   This is a simplified interface to :cfunc:`PyRun_SimpleFileExFlags` below,
+   This is a simplified interface to :c:func:`PyRun_SimpleFileExFlags` below,
    leaving *closeit* set to ``0``.
 
 
-.. cfunction:: int PyRun_SimpleFileEx(FILE *fp, const char *filename, int closeit)
+.. c:function:: int PyRun_SimpleFileEx(FILE *fp, const char *filename, int closeit)
 
-   This is a simplified interface to :cfunc:`PyRun_SimpleFileExFlags` below,
+   This is a simplified interface to :c:func:`PyRun_SimpleFileExFlags` below,
    leaving *flags* set to *NULL*.
 
 
-.. cfunction:: int PyRun_SimpleFileExFlags(FILE *fp, const char *filename, int closeit, PyCompilerFlags *flags)
+.. c:function:: int PyRun_SimpleFileExFlags(FILE *fp, const char *filename, int closeit, PyCompilerFlags *flags)
 
-   Similar to :cfunc:`PyRun_SimpleStringFlags`, but the Python source code is read
+   Similar to :c:func:`PyRun_SimpleStringFlags`, but the Python source code is read
    from *fp* instead of an in-memory string. *filename* should be the name of the
    file.  If *closeit* is true, the file is closed before PyRun_SimpleFileExFlags
    returns.
 
 
-.. cfunction:: int PyRun_InteractiveOne(FILE *fp, const char *filename)
+.. c:function:: int PyRun_InteractiveOne(FILE *fp, const char *filename)
 
-   This is a simplified interface to :cfunc:`PyRun_InteractiveOneFlags` below,
+   This is a simplified interface to :c:func:`PyRun_InteractiveOneFlags` below,
    leaving *flags* set to *NULL*.
 
 
-.. cfunction:: int PyRun_InteractiveOneFlags(FILE *fp, const char *filename, PyCompilerFlags *flags)
+.. c:function:: int PyRun_InteractiveOneFlags(FILE *fp, const char *filename, PyCompilerFlags *flags)
 
    Read and execute a single statement from a file associated with an
    interactive device according to the *flags* argument.  The user will be
@@ -130,34 +130,34 @@
    :file:`Python.h`, so must be included specifically if needed.)
 
 
-.. cfunction:: int PyRun_InteractiveLoop(FILE *fp, const char *filename)
+.. c:function:: int PyRun_InteractiveLoop(FILE *fp, const char *filename)
 
-   This is a simplified interface to :cfunc:`PyRun_InteractiveLoopFlags` below,
+   This is a simplified interface to :c:func:`PyRun_InteractiveLoopFlags` below,
    leaving *flags* set to *NULL*.
 
 
-.. cfunction:: int PyRun_InteractiveLoopFlags(FILE *fp, const char *filename, PyCompilerFlags *flags)
+.. c:function:: int PyRun_InteractiveLoopFlags(FILE *fp, const char *filename, PyCompilerFlags *flags)
 
    Read and execute statements from a file associated with an interactive device
    until EOF is reached.  The user will be prompted using ``sys.ps1`` and
    ``sys.ps2``.  Returns ``0`` at EOF.
 
 
-.. cfunction:: struct _node* PyParser_SimpleParseString(const char *str, int start)
+.. c:function:: struct _node* PyParser_SimpleParseString(const char *str, int start)
 
    This is a simplified interface to
-   :cfunc:`PyParser_SimpleParseStringFlagsFilename` below, leaving  *filename* set
+   :c:func:`PyParser_SimpleParseStringFlagsFilename` below, leaving  *filename* set
    to *NULL* and *flags* set to ``0``.
 
 
-.. cfunction:: struct _node* PyParser_SimpleParseStringFlags( const char *str, int start, int flags)
+.. c:function:: struct _node* PyParser_SimpleParseStringFlags( const char *str, int start, int flags)
 
    This is a simplified interface to
-   :cfunc:`PyParser_SimpleParseStringFlagsFilename` below, leaving  *filename* set
+   :c:func:`PyParser_SimpleParseStringFlagsFilename` below, leaving  *filename* set
    to *NULL*.
 
 
-.. cfunction:: struct _node* PyParser_SimpleParseStringFlagsFilename( const char *str, const char *filename, int start, int flags)
+.. c:function:: struct _node* PyParser_SimpleParseStringFlagsFilename( const char *str, const char *filename, int start, int flags)
 
    Parse Python source code from *str* using the start token *start* according to
    the *flags* argument.  The result can be used to create a code object which can
@@ -165,25 +165,25 @@
    many times.
 
 
-.. cfunction:: struct _node* PyParser_SimpleParseFile(FILE *fp, const char *filename, int start)
+.. c:function:: struct _node* PyParser_SimpleParseFile(FILE *fp, const char *filename, int start)
 
-   This is a simplified interface to :cfunc:`PyParser_SimpleParseFileFlags` below,
+   This is a simplified interface to :c:func:`PyParser_SimpleParseFileFlags` below,
    leaving *flags* set to ``0``
 
 
-.. cfunction:: struct _node* PyParser_SimpleParseFileFlags(FILE *fp, const char *filename, int start, int flags)
+.. c:function:: struct _node* PyParser_SimpleParseFileFlags(FILE *fp, const char *filename, int start, int flags)
 
-   Similar to :cfunc:`PyParser_SimpleParseStringFlagsFilename`, but the Python
+   Similar to :c:func:`PyParser_SimpleParseStringFlagsFilename`, but the Python
    source code is read from *fp* instead of an in-memory string.
 
 
-.. cfunction:: PyObject* PyRun_String(const char *str, int start, PyObject *globals, PyObject *locals)
+.. c:function:: PyObject* PyRun_String(const char *str, int start, PyObject *globals, PyObject *locals)
 
-   This is a simplified interface to :cfunc:`PyRun_StringFlags` below, leaving
+   This is a simplified interface to :c:func:`PyRun_StringFlags` below, leaving
    *flags* set to *NULL*.
 
 
-.. cfunction:: PyObject* PyRun_StringFlags(const char *str, int start, PyObject *globals, PyObject *locals, PyCompilerFlags *flags)
+.. c:function:: PyObject* PyRun_StringFlags(const char *str, int start, PyObject *globals, PyObject *locals, PyCompilerFlags *flags)
 
    Execute Python source code from *str* in the context specified by the
    dictionaries *globals* and *locals* with the compiler flags specified by
@@ -194,39 +194,39 @@
    exception was raised.
 
 
-.. cfunction:: PyObject* PyRun_File(FILE *fp, const char *filename, int start, PyObject *globals, PyObject *locals)
+.. c:function:: PyObject* PyRun_File(FILE *fp, const char *filename, int start, PyObject *globals, PyObject *locals)
 
-   This is a simplified interface to :cfunc:`PyRun_FileExFlags` below, leaving
+   This is a simplified interface to :c:func:`PyRun_FileExFlags` below, leaving
    *closeit* set to ``0`` and *flags* set to *NULL*.
 
 
-.. cfunction:: PyObject* PyRun_FileEx(FILE *fp, const char *filename, int start, PyObject *globals, PyObject *locals, int closeit)
+.. c:function:: PyObject* PyRun_FileEx(FILE *fp, const char *filename, int start, PyObject *globals, PyObject *locals, int closeit)
 
-   This is a simplified interface to :cfunc:`PyRun_FileExFlags` below, leaving
+   This is a simplified interface to :c:func:`PyRun_FileExFlags` below, leaving
    *flags* set to *NULL*.
 
 
-.. cfunction:: PyObject* PyRun_FileFlags(FILE *fp, const char *filename, int start, PyObject *globals, PyObject *locals, PyCompilerFlags *flags)
+.. c:function:: PyObject* PyRun_FileFlags(FILE *fp, const char *filename, int start, PyObject *globals, PyObject *locals, PyCompilerFlags *flags)
 
-   This is a simplified interface to :cfunc:`PyRun_FileExFlags` below, leaving
+   This is a simplified interface to :c:func:`PyRun_FileExFlags` below, leaving
    *closeit* set to ``0``.
 
 
-.. cfunction:: PyObject* PyRun_FileExFlags(FILE *fp, const char *filename, int start, PyObject *globals, PyObject *locals, int closeit, PyCompilerFlags *flags)
+.. c:function:: PyObject* PyRun_FileExFlags(FILE *fp, const char *filename, int start, PyObject *globals, PyObject *locals, int closeit, PyCompilerFlags *flags)
 
-   Similar to :cfunc:`PyRun_StringFlags`, but the Python source code is read from
+   Similar to :c:func:`PyRun_StringFlags`, but the Python source code is read from
    *fp* instead of an in-memory string. *filename* should be the name of the file.
-   If *closeit* is true, the file is closed before :cfunc:`PyRun_FileExFlags`
+   If *closeit* is true, the file is closed before :c:func:`PyRun_FileExFlags`
    returns.
 
 
-.. cfunction:: PyObject* Py_CompileString(const char *str, const char *filename, int start)
+.. c:function:: PyObject* Py_CompileString(const char *str, const char *filename, int start)
 
-   This is a simplified interface to :cfunc:`Py_CompileStringFlags` below, leaving
+   This is a simplified interface to :c:func:`Py_CompileStringFlags` below, leaving
    *flags* set to *NULL*.
 
 
-.. cfunction:: PyObject* Py_CompileStringFlags(const char *str, const char *filename, int start, PyCompilerFlags *flags)
+.. c:function:: PyObject* Py_CompileStringFlags(const char *str, const char *filename, int start, PyCompilerFlags *flags)
 
    Parse and compile the Python source code in *str*, returning the resulting code
    object.  The start token is given by *start*; this can be used to constrain the
@@ -237,14 +237,14 @@
    be parsed or compiled.
 
 
-.. cfunction:: PyObject* PyEval_EvalCode(PyCodeObject *co, PyObject *globals, PyObject *locals)
+.. c:function:: PyObject* PyEval_EvalCode(PyCodeObject *co, PyObject *globals, PyObject *locals)
 
-   This is a simplified interface to :cfunc:`PyEval_EvalCodeEx`, with just
+   This is a simplified interface to :c:func:`PyEval_EvalCodeEx`, with just
    the code object, and the dictionaries of global and local variables.
    The other arguments are set to *NULL*.
 
 
-.. cfunction:: PyObject* PyEval_EvalCodeEx(PyCodeObject *co, PyObject *globals, PyObject *locals, PyObject **args, int argcount, PyObject **kws, int kwcount, PyObject **defs, int defcount, PyObject *closure)
+.. c:function:: PyObject* PyEval_EvalCodeEx(PyCodeObject *co, PyObject *globals, PyObject *locals, PyObject **args, int argcount, PyObject **kws, int kwcount, PyObject **defs, int defcount, PyObject *closure)
 
    Evaluate a precompiled code object, given a particular environment for its
    evaluation.  This environment consists of dictionaries of global and local
@@ -252,13 +252,13 @@
    cells.
 
 
-.. cfunction:: PyObject* PyEval_EvalFrame(PyFrameObject *f)
+.. c:function:: PyObject* PyEval_EvalFrame(PyFrameObject *f)
 
    Evaluate an execution frame.  This is a simplified interface to
    PyEval_EvalFrameEx, for backward compatibility.
 
 
-.. cfunction:: PyObject* PyEval_EvalFrameEx(PyFrameObject *f, int throwflag)
+.. c:function:: PyObject* PyEval_EvalFrameEx(PyFrameObject *f, int throwflag)
 
    This is the main, unvarnished function of Python interpretation.  It is
    literally 2000 lines long.  The code object associated with the execution
@@ -268,39 +268,39 @@
    :meth:`throw` methods of generator objects.
 
 
-.. cfunction:: int PyEval_MergeCompilerFlags(PyCompilerFlags *cf)
+.. c:function:: int PyEval_MergeCompilerFlags(PyCompilerFlags *cf)
 
    This function changes the flags of the current evaluation frame, and returns
    true on success, false on failure.
 
 
-.. cvar:: int Py_eval_input
+.. c:var:: int Py_eval_input
 
    .. index:: single: Py_CompileString()
 
    The start symbol from the Python grammar for isolated expressions; for use with
-   :cfunc:`Py_CompileString`.
+   :c:func:`Py_CompileString`.
 
 
-.. cvar:: int Py_file_input
+.. c:var:: int Py_file_input
 
    .. index:: single: Py_CompileString()
 
    The start symbol from the Python grammar for sequences of statements as read
-   from a file or other source; for use with :cfunc:`Py_CompileString`.  This is
+   from a file or other source; for use with :c:func:`Py_CompileString`.  This is
    the symbol to use when compiling arbitrarily long Python source code.
 
 
-.. cvar:: int Py_single_input
+.. c:var:: int Py_single_input
 
    .. index:: single: Py_CompileString()
 
    The start symbol from the Python grammar for a single statement; for use with
-   :cfunc:`Py_CompileString`. This is the symbol used for the interactive
+   :c:func:`Py_CompileString`. This is the symbol used for the interactive
    interpreter loop.
 
 
-.. ctype:: struct PyCompilerFlags
+.. c:type:: struct PyCompilerFlags
 
    This is the structure used to hold compiler flags.  In cases where code is only
    being compiled, it is passed as ``int flags``, and in cases where code is being
@@ -316,7 +316,7 @@
       }
 
 
-.. cvar:: int CO_FUTURE_DIVISION
+.. c:var:: int CO_FUTURE_DIVISION
 
    This bit can be set in *flags* to cause division operator ``/`` to be
    interpreted as "true division" according to :pep:`238`.
diff --git a/Doc/c-api/weakref.rst b/Doc/c-api/weakref.rst
index 226ec38..243cfd1 100644
--- a/Doc/c-api/weakref.rst
+++ b/Doc/c-api/weakref.rst
@@ -11,28 +11,28 @@
 as much as it can.
 
 
-.. cfunction:: int PyWeakref_Check(ob)
+.. c:function:: int PyWeakref_Check(ob)
 
    Return true if *ob* is either a reference or proxy object.
 
    .. versionadded:: 2.2
 
 
-.. cfunction:: int PyWeakref_CheckRef(ob)
+.. c:function:: int PyWeakref_CheckRef(ob)
 
    Return true if *ob* is a reference object.
 
    .. versionadded:: 2.2
 
 
-.. cfunction:: int PyWeakref_CheckProxy(ob)
+.. c:function:: int PyWeakref_CheckProxy(ob)
 
    Return true if *ob* is a proxy object.
 
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyObject* PyWeakref_NewRef(PyObject *ob, PyObject *callback)
+.. c:function:: PyObject* PyWeakref_NewRef(PyObject *ob, PyObject *callback)
 
    Return a weak reference object for the object *ob*.  This will always return
    a new reference, but is not guaranteed to create a new object; an existing
@@ -46,7 +46,7 @@
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyObject* PyWeakref_NewProxy(PyObject *ob, PyObject *callback)
+.. c:function:: PyObject* PyWeakref_NewProxy(PyObject *ob, PyObject *callback)
 
    Return a weak reference proxy object for the object *ob*.  This will always
    return a new reference, but is not guaranteed to create a new object; an
@@ -60,7 +60,7 @@
    .. versionadded:: 2.2
 
 
-.. cfunction:: PyObject* PyWeakref_GetObject(PyObject *ref)
+.. c:function:: PyObject* PyWeakref_GetObject(PyObject *ref)
 
    Return the referenced object from a weak reference, *ref*.  If the referent is
    no longer live, returns :const:`Py_None`.
@@ -70,14 +70,14 @@
    .. warning::
 
       This function returns a **borrowed reference** to the referenced object.
-      This means that you should always call :cfunc:`Py_INCREF` on the object
+      This means that you should always call :c:func:`Py_INCREF` on the object
       except if you know that it cannot be destroyed while you are still
       using it.
 
 
-.. cfunction:: PyObject* PyWeakref_GET_OBJECT(PyObject *ref)
+.. c:function:: PyObject* PyWeakref_GET_OBJECT(PyObject *ref)
 
-   Similar to :cfunc:`PyWeakref_GetObject`, but implemented as a macro that does no
+   Similar to :c:func:`PyWeakref_GetObject`, but implemented as a macro that does no
    error checking.
 
    .. versionadded:: 2.2
diff --git a/Doc/distutils/builtdist.rst b/Doc/distutils/builtdist.rst
index b4f2f1a..7a11459 100644
--- a/Doc/distutils/builtdist.rst
+++ b/Doc/distutils/builtdist.rst
@@ -426,7 +426,7 @@
 
    Which folders are available depends on the exact Windows version, and probably
    also the configuration.  For details refer to Microsoft's documentation of the
-   :cfunc:`SHGetSpecialFolderPath` function.
+   :c:func:`SHGetSpecialFolderPath` function.
 
 
 .. function:: create_shortcut(target, description, filename[, arguments[, workdir[, iconpath[, iconindex]]]])
diff --git a/Doc/documenting/markup.rst b/Doc/documenting/markup.rst
index 25801c7..e8fdf00 100644
--- a/Doc/documenting/markup.rst
+++ b/Doc/documenting/markup.rst
@@ -112,7 +112,7 @@
 
    Describes a C function. The signature should be given as in C, e.g.::
 
-      .. cfunction:: PyObject* PyType_GenericAlloc(PyTypeObject *type, Py_ssize_t nitems)
+      .. c:function:: PyObject* PyType_GenericAlloc(PyTypeObject *type, Py_ssize_t nitems)
 
    This is also used to describe function-like preprocessor macros.  The names
    of the arguments should be given so they may be used in the description.
@@ -124,7 +124,7 @@
 
    Describes a C struct member. Example signature::
 
-      .. cmember:: PyObject* PyTypeObject.tp_bases
+      .. c:member:: PyObject* PyTypeObject.tp_bases
 
    The text of the description should include the range of values allowed, how
    the value should be interpreted, and whether the value can be changed.
@@ -135,8 +135,8 @@
    Describes a "simple" C macro.  Simple macros are macros which are used
    for code expansion, but which do not take arguments so cannot be described as
    functions.  This is not to be used for simple constant definitions.  Examples
-   of its use in the Python documentation include :cmacro:`PyObject_HEAD` and
-   :cmacro:`Py_BEGIN_ALLOW_THREADS`.
+   of its use in the Python documentation include :c:macro:`PyObject_HEAD` and
+   :c:macro:`Py_BEGIN_ALLOW_THREADS`.
 
 .. describe:: ctype
 
@@ -147,7 +147,7 @@
    Describes a global C variable.  The signature should include the type, such
    as::
 
-      .. cvar:: PyObject* PyClass_Type
+      .. c:var:: PyObject* PyClass_Type
 
 .. describe:: data
 
diff --git a/Doc/extending/embedding.rst b/Doc/extending/embedding.rst
index b89e224..4bd0199 100644
--- a/Doc/extending/embedding.rst
+++ b/Doc/extending/embedding.rst
@@ -25,14 +25,14 @@
 
 So if you are embedding Python, you are providing your own main program.  One of
 the things this main program has to do is initialize the Python interpreter.  At
-the very least, you have to call the function :cfunc:`Py_Initialize`.  There are
+the very least, you have to call the function :c:func:`Py_Initialize`.  There are
 optional calls to pass command line arguments to Python.  Then later you can
 call the interpreter from any part of the application.
 
 There are several different ways to call the interpreter: you can pass a string
-containing Python statements to :cfunc:`PyRun_SimpleString`, or you can pass a
+containing Python statements to :c:func:`PyRun_SimpleString`, or you can pass a
 stdio file pointer and a file name (for identification in error messages only)
-to :cfunc:`PyRun_SimpleFile`.  You can also call the lower-level operations
+to :c:func:`PyRun_SimpleFile`.  You can also call the lower-level operations
 described in the previous chapters to construct and use Python objects.
 
 A simple demo of embedding Python can be found in the directory
@@ -69,12 +69,12 @@
    }
 
 The above code first initializes the Python interpreter with
-:cfunc:`Py_Initialize`, followed by the execution of a hard-coded Python script
-that print the date and time.  Afterwards, the :cfunc:`Py_Finalize` call shuts
+:c:func:`Py_Initialize`, followed by the execution of a hard-coded Python script
+that print the date and time.  Afterwards, the :c:func:`Py_Finalize` call shuts
 the interpreter down, followed by the end of the program.  In a real program,
 you may want to get the Python script from another source, perhaps a text-editor
 routine, a file, or a database.  Getting the Python code from a file can better
-be done by using the :cfunc:`PyRun_SimpleFile` function, which saves you the
+be done by using the :c:func:`PyRun_SimpleFile` function, which saves you the
 trouble of allocating memory space and loading the file contents.
 
 
@@ -162,8 +162,8 @@
    pModule = PyImport_Import(pName);
 
 After initializing the interpreter, the script is loaded using
-:cfunc:`PyImport_Import`.  This routine needs a Python string as its argument,
-which is constructed using the :cfunc:`PyString_FromString` data conversion
+:c:func:`PyImport_Import`.  This routine needs a Python string as its argument,
+which is constructed using the :c:func:`PyString_FromString` data conversion
 routine. ::
 
    pFunc = PyObject_GetAttrString(pModule, argv[2]);
@@ -175,7 +175,7 @@
    Py_XDECREF(pFunc);
 
 Once the script is loaded, the name we're looking for is retrieved using
-:cfunc:`PyObject_GetAttrString`.  If the name exists, and the object returned is
+:c:func:`PyObject_GetAttrString`.  If the name exists, and the object returned is
 callable, you can safely assume that it is a function.  The program then
 proceeds by constructing a tuple of arguments as normal.  The call to the Python
 function is then made with::
@@ -218,8 +218,8 @@
        {NULL, NULL, 0, NULL}
    };
 
-Insert the above code just above the :cfunc:`main` function. Also, insert the
-following two statements directly after :cfunc:`Py_Initialize`::
+Insert the above code just above the :c:func:`main` function. Also, insert the
+following two statements directly after :c:func:`Py_Initialize`::
 
    numargs = argc;
    Py_InitModule("emb", EmbMethods);
diff --git a/Doc/extending/extending.rst b/Doc/extending/extending.rst
index ad6a9f3..eb18a46 100644
--- a/Doc/extending/extending.rst
+++ b/Doc/extending/extending.rst
@@ -35,7 +35,7 @@
 
 Let's create an extension module called ``spam`` (the favorite food of Monty
 Python fans...) and let's say we want to create a Python interface to the C
-library function :cfunc:`system`. [#]_ This function takes a null-terminated
+library function :c:func:`system`. [#]_ This function takes a null-terminated
 character string as argument and returns an integer.  We want this function to
 be callable from Python as follows::
 
@@ -65,8 +65,8 @@
 since they are used extensively by the Python interpreter, ``"Python.h"``
 includes a few standard header files: ``<stdio.h>``, ``<string.h>``,
 ``<errno.h>``, and ``<stdlib.h>``.  If the latter header file does not exist on
-your system, it declares the functions :cfunc:`malloc`, :cfunc:`free` and
-:cfunc:`realloc` directly.
+your system, it declares the functions :c:func:`malloc`, :c:func:`free` and
+:c:func:`realloc` directly.
 
 The next thing we add to our module file is the C function that will be called
 when the Python expression ``spam.system(string)`` is evaluated (we'll see
@@ -96,12 +96,12 @@
 arguments.  Each item of the tuple corresponds to an argument in the call's
 argument list.  The arguments are Python objects --- in order to do anything
 with them in our C function we have to convert them to C values.  The function
-:cfunc:`PyArg_ParseTuple` in the Python API checks the argument types and
+:c:func:`PyArg_ParseTuple` in the Python API checks the argument types and
 converts them to C values.  It uses a template string to determine the required
 types of the arguments as well as the types of the C variables into which to
 store the converted values.  More about this later.
 
-:cfunc:`PyArg_ParseTuple` returns true (nonzero) if all arguments have the right
+:c:func:`PyArg_ParseTuple` returns true (nonzero) if all arguments have the right
 type and its components have been stored in the variables whose addresses are
 passed.  It returns false (zero) if an invalid argument list was passed.  In the
 latter case it also raises an appropriate exception so the calling function can
@@ -127,77 +127,77 @@
 
 The Python API defines a number of functions to set various types of exceptions.
 
-The most common one is :cfunc:`PyErr_SetString`.  Its arguments are an exception
+The most common one is :c:func:`PyErr_SetString`.  Its arguments are an exception
 object and a C string.  The exception object is usually a predefined object like
-:cdata:`PyExc_ZeroDivisionError`.  The C string indicates the cause of the error
+:c:data:`PyExc_ZeroDivisionError`.  The C string indicates the cause of the error
 and is converted to a Python string object and stored as the "associated value"
 of the exception.
 
-Another useful function is :cfunc:`PyErr_SetFromErrno`, which only takes an
+Another useful function is :c:func:`PyErr_SetFromErrno`, which only takes an
 exception argument and constructs the associated value by inspection of the
-global variable :cdata:`errno`.  The most general function is
-:cfunc:`PyErr_SetObject`, which takes two object arguments, the exception and
-its associated value.  You don't need to :cfunc:`Py_INCREF` the objects passed
+global variable :c:data:`errno`.  The most general function is
+:c:func:`PyErr_SetObject`, which takes two object arguments, the exception and
+its associated value.  You don't need to :c:func:`Py_INCREF` the objects passed
 to any of these functions.
 
 You can test non-destructively whether an exception has been set with
-:cfunc:`PyErr_Occurred`.  This returns the current exception object, or *NULL*
+:c:func:`PyErr_Occurred`.  This returns the current exception object, or *NULL*
 if no exception has occurred.  You normally don't need to call
-:cfunc:`PyErr_Occurred` to see whether an error occurred in a function call,
+:c:func:`PyErr_Occurred` to see whether an error occurred in a function call,
 since you should be able to tell from the return value.
 
 When a function *f* that calls another function *g* detects that the latter
 fails, *f* should itself return an error value (usually *NULL* or ``-1``).  It
-should *not* call one of the :cfunc:`PyErr_\*` functions --- one has already
+should *not* call one of the :c:func:`PyErr_\*` functions --- one has already
 been called by *g*. *f*'s caller is then supposed to also return an error
-indication to *its* caller, again *without* calling :cfunc:`PyErr_\*`, and so on
+indication to *its* caller, again *without* calling :c:func:`PyErr_\*`, and so on
 --- the most detailed cause of the error was already reported by the function
 that first detected it.  Once the error reaches the Python interpreter's main
 loop, this aborts the currently executing Python code and tries to find an
 exception handler specified by the Python programmer.
 
 (There are situations where a module can actually give a more detailed error
-message by calling another :cfunc:`PyErr_\*` function, and in such cases it is
+message by calling another :c:func:`PyErr_\*` function, and in such cases it is
 fine to do so.  As a general rule, however, this is not necessary, and can cause
 information about the cause of the error to be lost: most operations can fail
 for a variety of reasons.)
 
 To ignore an exception set by a function call that failed, the exception
-condition must be cleared explicitly by calling :cfunc:`PyErr_Clear`.  The only
-time C code should call :cfunc:`PyErr_Clear` is if it doesn't want to pass the
+condition must be cleared explicitly by calling :c:func:`PyErr_Clear`.  The only
+time C code should call :c:func:`PyErr_Clear` is if it doesn't want to pass the
 error on to the interpreter but wants to handle it completely by itself
 (possibly by trying something else, or pretending nothing went wrong).
 
-Every failing :cfunc:`malloc` call must be turned into an exception --- the
-direct caller of :cfunc:`malloc` (or :cfunc:`realloc`) must call
-:cfunc:`PyErr_NoMemory` and return a failure indicator itself.  All the
-object-creating functions (for example, :cfunc:`PyInt_FromLong`) already do
-this, so this note is only relevant to those who call :cfunc:`malloc` directly.
+Every failing :c:func:`malloc` call must be turned into an exception --- the
+direct caller of :c:func:`malloc` (or :c:func:`realloc`) must call
+:c:func:`PyErr_NoMemory` and return a failure indicator itself.  All the
+object-creating functions (for example, :c:func:`PyInt_FromLong`) already do
+this, so this note is only relevant to those who call :c:func:`malloc` directly.
 
-Also note that, with the important exception of :cfunc:`PyArg_ParseTuple` and
+Also note that, with the important exception of :c:func:`PyArg_ParseTuple` and
 friends, functions that return an integer status usually return a positive value
 or zero for success and ``-1`` for failure, like Unix system calls.
 
-Finally, be careful to clean up garbage (by making :cfunc:`Py_XDECREF` or
-:cfunc:`Py_DECREF` calls for objects you have already created) when you return
+Finally, be careful to clean up garbage (by making :c:func:`Py_XDECREF` or
+:c:func:`Py_DECREF` calls for objects you have already created) when you return
 an error indicator!
 
 The choice of which exception to raise is entirely yours.  There are predeclared
 C objects corresponding to all built-in Python exceptions, such as
-:cdata:`PyExc_ZeroDivisionError`, which you can use directly. Of course, you
-should choose exceptions wisely --- don't use :cdata:`PyExc_TypeError` to mean
-that a file couldn't be opened (that should probably be :cdata:`PyExc_IOError`).
-If something's wrong with the argument list, the :cfunc:`PyArg_ParseTuple`
-function usually raises :cdata:`PyExc_TypeError`.  If you have an argument whose
+:c:data:`PyExc_ZeroDivisionError`, which you can use directly. Of course, you
+should choose exceptions wisely --- don't use :c:data:`PyExc_TypeError` to mean
+that a file couldn't be opened (that should probably be :c:data:`PyExc_IOError`).
+If something's wrong with the argument list, the :c:func:`PyArg_ParseTuple`
+function usually raises :c:data:`PyExc_TypeError`.  If you have an argument whose
 value must be in a particular range or must satisfy other conditions,
-:cdata:`PyExc_ValueError` is appropriate.
+:c:data:`PyExc_ValueError` is appropriate.
 
 You can also define a new exception that is unique to your module. For this, you
 usually declare a static object variable at the beginning of your file::
 
    static PyObject *SpamError;
 
-and initialize it in your module's initialization function (:cfunc:`initspam`)
+and initialize it in your module's initialization function (:c:func:`initspam`)
 with an exception object (leaving out the error checking for now)::
 
    PyMODINIT_FUNC
@@ -215,14 +215,14 @@
    }
 
 Note that the Python name for the exception object is :exc:`spam.error`.  The
-:cfunc:`PyErr_NewException` function may create a class with the base class
+:c:func:`PyErr_NewException` function may create a class with the base class
 being :exc:`Exception` (unless another class is passed in instead of *NULL*),
 described in :ref:`bltin-exceptions`.
 
-Note also that the :cdata:`SpamError` variable retains a reference to the newly
+Note also that the :c:data:`SpamError` variable retains a reference to the newly
 created exception class; this is intentional!  Since the exception could be
 removed from the module by external code, an owned reference to the class is
-needed to ensure that it will not be discarded, causing :cdata:`SpamError` to
+needed to ensure that it will not be discarded, causing :c:data:`SpamError` to
 become a dangling pointer. Should it become a dangling pointer, C code which
 raises the exception could cause a core dump or other unintended side effects.
 
@@ -230,7 +230,7 @@
 sample.
 
 The :exc:`spam.error` exception can be raised in your extension module using a
-call to :cfunc:`PyErr_SetString` as shown below::
+call to :c:func:`PyErr_SetString` as shown below::
 
    static PyObject *
    spam_system(PyObject *self, PyObject *args)
@@ -262,22 +262,22 @@
 
 It returns *NULL* (the error indicator for functions returning object pointers)
 if an error is detected in the argument list, relying on the exception set by
-:cfunc:`PyArg_ParseTuple`.  Otherwise the string value of the argument has been
-copied to the local variable :cdata:`command`.  This is a pointer assignment and
+:c:func:`PyArg_ParseTuple`.  Otherwise the string value of the argument has been
+copied to the local variable :c:data:`command`.  This is a pointer assignment and
 you are not supposed to modify the string to which it points (so in Standard C,
-the variable :cdata:`command` should properly be declared as ``const char
+the variable :c:data:`command` should properly be declared as ``const char
 *command``).
 
-The next statement is a call to the Unix function :cfunc:`system`, passing it
-the string we just got from :cfunc:`PyArg_ParseTuple`::
+The next statement is a call to the Unix function :c:func:`system`, passing it
+the string we just got from :c:func:`PyArg_ParseTuple`::
 
    sts = system(command);
 
-Our :func:`spam.system` function must return the value of :cdata:`sts` as a
-Python object.  This is done using the function :cfunc:`Py_BuildValue`, which is
-something like the inverse of :cfunc:`PyArg_ParseTuple`: it takes a format
+Our :func:`spam.system` function must return the value of :c:data:`sts` as a
+Python object.  This is done using the function :c:func:`Py_BuildValue`, which is
+something like the inverse of :c:func:`PyArg_ParseTuple`: it takes a format
 string and an arbitrary number of C values, and returns a new Python object.
-More info on :cfunc:`Py_BuildValue` is given later. ::
+More info on :c:func:`Py_BuildValue` is given later. ::
 
    return Py_BuildValue("i", sts);
 
@@ -285,14 +285,14 @@
 on the heap in Python!)
 
 If you have a C function that returns no useful argument (a function returning
-:ctype:`void`), the corresponding Python function must return ``None``.   You
-need this idiom to do so (which is implemented by the :cmacro:`Py_RETURN_NONE`
+:c:type:`void`), the corresponding Python function must return ``None``.   You
+need this idiom to do so (which is implemented by the :c:macro:`Py_RETURN_NONE`
 macro)::
 
    Py_INCREF(Py_None);
    return Py_None;
 
-:cdata:`Py_None` is the C name for the special Python object ``None``.  It is a
+:c:data:`Py_None` is the C name for the special Python object ``None``.  It is a
 genuine Python object rather than a *NULL* pointer, which means "error" in most
 contexts, as we have seen.
 
@@ -302,7 +302,7 @@
 The Module's Method Table and Initialization Function
 =====================================================
 
-I promised to show how :cfunc:`spam_system` is called from Python programs.
+I promised to show how :c:func:`spam_system` is called from Python programs.
 First, we need to list its name and address in a "method table"::
 
    static PyMethodDef SpamMethods[] = {
@@ -316,21 +316,21 @@
 Note the third entry (``METH_VARARGS``).  This is a flag telling the interpreter
 the calling convention to be used for the C function.  It should normally always
 be ``METH_VARARGS`` or ``METH_VARARGS | METH_KEYWORDS``; a value of ``0`` means
-that an obsolete variant of :cfunc:`PyArg_ParseTuple` is used.
+that an obsolete variant of :c:func:`PyArg_ParseTuple` is used.
 
 When using only ``METH_VARARGS``, the function should expect the Python-level
 parameters to be passed in as a tuple acceptable for parsing via
-:cfunc:`PyArg_ParseTuple`; more information on this function is provided below.
+:c:func:`PyArg_ParseTuple`; more information on this function is provided below.
 
 The :const:`METH_KEYWORDS` bit may be set in the third field if keyword
 arguments should be passed to the function.  In this case, the C function should
 accept a third ``PyObject *`` parameter which will be a dictionary of keywords.
-Use :cfunc:`PyArg_ParseTupleAndKeywords` to parse the arguments to such a
+Use :c:func:`PyArg_ParseTupleAndKeywords` to parse the arguments to such a
 function.
 
 The method table must be passed to the interpreter in the module's
 initialization function.  The initialization function must be named
-:cfunc:`initname`, where *name* is the name of the module, and should be the
+:c:func:`initname`, where *name* is the name of the module, and should be the
 only non-\ ``static`` item defined in the module file::
 
    PyMODINIT_FUNC
@@ -344,21 +344,21 @@
 declares the function as ``extern "C"``.
 
 When the Python program imports module :mod:`spam` for the first time,
-:cfunc:`initspam` is called. (See below for comments about embedding Python.)
-It calls :cfunc:`Py_InitModule`, which creates a "module object" (which is
+:c:func:`initspam` is called. (See below for comments about embedding Python.)
+It calls :c:func:`Py_InitModule`, which creates a "module object" (which is
 inserted in the dictionary ``sys.modules`` under the key ``"spam"``), and
 inserts built-in function objects into the newly created module based upon the
-table (an array of :ctype:`PyMethodDef` structures) that was passed as its
-second argument. :cfunc:`Py_InitModule` returns a pointer to the module object
+table (an array of :c:type:`PyMethodDef` structures) that was passed as its
+second argument. :c:func:`Py_InitModule` returns a pointer to the module object
 that it creates (which is unused here).  It may abort with a fatal error for
 certain errors, or return *NULL* if the module could not be initialized
 satisfactorily.
 
-When embedding Python, the :cfunc:`initspam` function is not called
-automatically unless there's an entry in the :cdata:`_PyImport_Inittab` table.
+When embedding Python, the :c:func:`initspam` function is not called
+automatically unless there's an entry in the :c:data:`_PyImport_Inittab` table.
 The easiest way to handle this is to statically initialize your
-statically-linked modules by directly calling :cfunc:`initspam` after the call
-to :cfunc:`Py_Initialize`::
+statically-linked modules by directly calling :c:func:`initspam` after the call
+to :c:func:`Py_Initialize`::
 
    int
    main(int argc, char *argv[])
@@ -378,12 +378,12 @@
 .. note::
 
    Removing entries from ``sys.modules`` or importing compiled modules into
-   multiple interpreters within a process (or following a :cfunc:`fork` without an
-   intervening :cfunc:`exec`) can create problems for some extension modules.
+   multiple interpreters within a process (or following a :c:func:`fork` without an
+   intervening :c:func:`exec`) can create problems for some extension modules.
    Extension module authors should exercise caution when initializing internal data
    structures. Note also that the :func:`reload` function can be used with
    extension modules, and will call the module initialization function
-   (:cfunc:`initspam` in the example), but will not load the module again if it was
+   (:c:func:`initspam` in the example), but will not load the module again if it was
    loaded from a dynamically loadable object file (:file:`.so` on Unix,
    :file:`.dll` on Windows).
 
@@ -447,7 +447,7 @@
 Calling a Python function is easy.  First, the Python program must somehow pass
 you the Python function object.  You should provide a function (or some other
 interface) to do this.  When this function is called, save a pointer to the
-Python function object (be careful to :cfunc:`Py_INCREF` it!) in a global
+Python function object (be careful to :c:func:`Py_INCREF` it!) in a global
 variable --- or wherever you see fit. For example, the following function might
 be part of a module definition::
 
@@ -476,10 +476,10 @@
 
 This function must be registered with the interpreter using the
 :const:`METH_VARARGS` flag; this is described in section :ref:`methodtable`.  The
-:cfunc:`PyArg_ParseTuple` function and its arguments are documented in section
+:c:func:`PyArg_ParseTuple` function and its arguments are documented in section
 :ref:`parsetuple`.
 
-The macros :cfunc:`Py_XINCREF` and :cfunc:`Py_XDECREF` increment/decrement the
+The macros :c:func:`Py_XINCREF` and :c:func:`Py_XDECREF` increment/decrement the
 reference count of an object and are safe in the presence of *NULL* pointers
 (but note that *temp* will not be  *NULL* in this context).  More info on them
 in section :ref:`refcounts`.
@@ -487,12 +487,12 @@
 .. index:: single: PyObject_CallObject()
 
 Later, when it is time to call the function, you call the C function
-:cfunc:`PyObject_CallObject`.  This function has two arguments, both pointers to
+:c:func:`PyObject_CallObject`.  This function has two arguments, both pointers to
 arbitrary Python objects: the Python function, and the argument list.  The
 argument list must always be a tuple object, whose length is the number of
 arguments.  To call the Python function with no arguments, pass in NULL, or
 an empty tuple; to call it with one argument, pass a singleton tuple.
-:cfunc:`Py_BuildValue` returns a tuple when its format string consists of zero
+:c:func:`Py_BuildValue` returns a tuple when its format string consists of zero
 or more format codes between parentheses.  For example::
 
    int arg;
@@ -506,25 +506,25 @@
    result = PyObject_CallObject(my_callback, arglist);
    Py_DECREF(arglist);
 
-:cfunc:`PyObject_CallObject` returns a Python object pointer: this is the return
-value of the Python function.  :cfunc:`PyObject_CallObject` is
+:c:func:`PyObject_CallObject` returns a Python object pointer: this is the return
+value of the Python function.  :c:func:`PyObject_CallObject` is
 "reference-count-neutral" with respect to its arguments.  In the example a new
-tuple was created to serve as the argument list, which is :cfunc:`Py_DECREF`\
+tuple was created to serve as the argument list, which is :c:func:`Py_DECREF`\
 -ed immediately after the call.
 
-The return value of :cfunc:`PyObject_CallObject` is "new": either it is a brand
+The return value of :c:func:`PyObject_CallObject` is "new": either it is a brand
 new object, or it is an existing object whose reference count has been
 incremented.  So, unless you want to save it in a global variable, you should
-somehow :cfunc:`Py_DECREF` the result, even (especially!) if you are not
+somehow :c:func:`Py_DECREF` the result, even (especially!) if you are not
 interested in its value.
 
 Before you do this, however, it is important to check that the return value
 isn't *NULL*.  If it is, the Python function terminated by raising an exception.
-If the C code that called :cfunc:`PyObject_CallObject` is called from Python, it
+If the C code that called :c:func:`PyObject_CallObject` is called from Python, it
 should now return an error indication to its Python caller, so the interpreter
 can print a stack trace, or the calling Python code can handle the exception.
 If this is not possible or desirable, the exception should be cleared by calling
-:cfunc:`PyErr_Clear`.  For example::
+:c:func:`PyErr_Clear`.  For example::
 
    if (result == NULL)
        return NULL; /* Pass error back */
@@ -532,12 +532,12 @@
    Py_DECREF(result);
 
 Depending on the desired interface to the Python callback function, you may also
-have to provide an argument list to :cfunc:`PyObject_CallObject`.  In some cases
+have to provide an argument list to :c:func:`PyObject_CallObject`.  In some cases
 the argument list is also provided by the Python program, through the same
 interface that specified the callback function.  It can then be saved and used
 in the same manner as the function object.  In other cases, you may have to
 construct a new tuple to pass as the argument list.  The simplest way to do this
-is to call :cfunc:`Py_BuildValue`.  For example, if you want to pass an integral
+is to call :c:func:`Py_BuildValue`.  For example, if you want to pass an integral
 event code, you might use the following code::
 
    PyObject *arglist;
@@ -552,11 +552,11 @@
 
 Note the placement of ``Py_DECREF(arglist)`` immediately after the call, before
 the error check!  Also note that strictly speaking this code is not complete:
-:cfunc:`Py_BuildValue` may run out of memory, and this should be checked.
+:c:func:`Py_BuildValue` may run out of memory, and this should be checked.
 
 You may also call a function with keyword arguments by using
-:cfunc:`PyObject_Call`, which supports arguments and keyword arguments.  As in
-the above example, we use :cfunc:`Py_BuildValue` to construct the dictionary. ::
+:c:func:`PyObject_Call`, which supports arguments and keyword arguments.  As in
+the above example, we use :c:func:`Py_BuildValue` to construct the dictionary. ::
 
    PyObject *dict;
    ...
@@ -576,7 +576,7 @@
 
 .. index:: single: PyArg_ParseTuple()
 
-The :cfunc:`PyArg_ParseTuple` function is declared as follows::
+The :c:func:`PyArg_ParseTuple` function is declared as follows::
 
    int PyArg_ParseTuple(PyObject *arg, char *format, ...);
 
@@ -586,7 +586,7 @@
 Manual.  The remaining arguments must be addresses of variables whose type is
 determined by the format string.
 
-Note that while :cfunc:`PyArg_ParseTuple` checks that the Python arguments have
+Note that while :c:func:`PyArg_ParseTuple` checks that the Python arguments have
 the required types, it cannot check the validity of the addresses of C variables
 passed to the call: if you make mistakes there, your code will probably crash or
 at least overwrite random bits in memory.  So be careful!
@@ -663,17 +663,17 @@
 
 .. index:: single: PyArg_ParseTupleAndKeywords()
 
-The :cfunc:`PyArg_ParseTupleAndKeywords` function is declared as follows::
+The :c:func:`PyArg_ParseTupleAndKeywords` function is declared as follows::
 
    int PyArg_ParseTupleAndKeywords(PyObject *arg, PyObject *kwdict,
                                    char *format, char *kwlist[], ...);
 
 The *arg* and *format* parameters are identical to those of the
-:cfunc:`PyArg_ParseTuple` function.  The *kwdict* parameter is the dictionary of
+:c:func:`PyArg_ParseTuple` function.  The *kwdict* parameter is the dictionary of
 keywords received as the third parameter from the Python runtime.  The *kwlist*
 parameter is a *NULL*-terminated list of strings which identify the parameters;
 the names are matched with the type information from *format* from left to
-right.  On success, :cfunc:`PyArg_ParseTupleAndKeywords` returns true, otherwise
+right.  On success, :c:func:`PyArg_ParseTupleAndKeywords` returns true, otherwise
 it returns false and raises an appropriate exception.
 
 .. note::
@@ -737,19 +737,19 @@
 Building Arbitrary Values
 =========================
 
-This function is the counterpart to :cfunc:`PyArg_ParseTuple`.  It is declared
+This function is the counterpart to :c:func:`PyArg_ParseTuple`.  It is declared
 as follows::
 
    PyObject *Py_BuildValue(char *format, ...);
 
 It recognizes a set of format units similar to the ones recognized by
-:cfunc:`PyArg_ParseTuple`, but the arguments (which are input to the function,
+:c:func:`PyArg_ParseTuple`, but the arguments (which are input to the function,
 not output) must not be pointers, just values.  It returns a new Python object,
 suitable for returning from a C function called from Python.
 
-One difference with :cfunc:`PyArg_ParseTuple`: while the latter requires its
+One difference with :c:func:`PyArg_ParseTuple`: while the latter requires its
 first argument to be a tuple (since Python argument lists are always represented
-as tuples internally), :cfunc:`Py_BuildValue` does not always build a tuple.  It
+as tuples internally), :c:func:`Py_BuildValue` does not always build a tuple.  It
 builds a tuple only if its format string contains two or more format units. If
 the format string is empty, it returns ``None``; if it contains exactly one
 format unit, it returns whatever object is described by that format unit.  To
@@ -781,18 +781,18 @@
 
 In languages like C or C++, the programmer is responsible for dynamic allocation
 and deallocation of memory on the heap.  In C, this is done using the functions
-:cfunc:`malloc` and :cfunc:`free`.  In C++, the operators ``new`` and
+:c:func:`malloc` and :c:func:`free`.  In C++, the operators ``new`` and
 ``delete`` are used with essentially the same meaning and we'll restrict
 the following discussion to the C case.
 
-Every block of memory allocated with :cfunc:`malloc` should eventually be
-returned to the pool of available memory by exactly one call to :cfunc:`free`.
-It is important to call :cfunc:`free` at the right time.  If a block's address
-is forgotten but :cfunc:`free` is not called for it, the memory it occupies
+Every block of memory allocated with :c:func:`malloc` should eventually be
+returned to the pool of available memory by exactly one call to :c:func:`free`.
+It is important to call :c:func:`free` at the right time.  If a block's address
+is forgotten but :c:func:`free` is not called for it, the memory it occupies
 cannot be reused until the program terminates.  This is called a :dfn:`memory
-leak`.  On the other hand, if a program calls :cfunc:`free` for a block and then
+leak`.  On the other hand, if a program calls :c:func:`free` for a block and then
 continues to use the block, it creates a conflict with re-use of the block
-through another :cfunc:`malloc` call.  This is called :dfn:`using freed memory`.
+through another :c:func:`malloc` call.  This is called :dfn:`using freed memory`.
 It has the same bad consequences as referencing uninitialized data --- core
 dumps, wrong results, mysterious crashes.
 
@@ -809,7 +809,7 @@
 important to prevent leaks from happening by having a coding convention or
 strategy that minimizes this kind of errors.
 
-Since Python makes heavy use of :cfunc:`malloc` and :cfunc:`free`, it needs a
+Since Python makes heavy use of :c:func:`malloc` and :c:func:`free`, it needs a
 strategy to avoid memory leaks as well as the use of freed memory.  The chosen
 method is called :dfn:`reference counting`.  The principle is simple: every
 object contains a counter, which is incremented when a reference to the object
@@ -821,11 +821,11 @@
 (Sometimes, reference counting is also referred to as a garbage collection
 strategy, hence my use of "automatic" to distinguish the two.)  The big
 advantage of automatic garbage collection is that the user doesn't need to call
-:cfunc:`free` explicitly.  (Another claimed advantage is an improvement in speed
+:c:func:`free` explicitly.  (Another claimed advantage is an improvement in speed
 or memory usage --- this is no hard fact however.)  The disadvantage is that for
 C, there is no truly portable automatic garbage collector, while reference
-counting can be implemented portably (as long as the functions :cfunc:`malloc`
-and :cfunc:`free` are available --- which the C Standard guarantees). Maybe some
+counting can be implemented portably (as long as the functions :c:func:`malloc`
+and :c:func:`free` are available --- which the C Standard guarantees). Maybe some
 day a sufficiently portable automatic garbage collector will be available for C.
 Until then, we'll have to live with reference counts.
 
@@ -861,9 +861,9 @@
 ----------------------------
 
 There are two macros, ``Py_INCREF(x)`` and ``Py_DECREF(x)``, which handle the
-incrementing and decrementing of the reference count. :cfunc:`Py_DECREF` also
+incrementing and decrementing of the reference count. :c:func:`Py_DECREF` also
 frees the object when the count reaches zero. For flexibility, it doesn't call
-:cfunc:`free` directly --- rather, it makes a call through a function pointer in
+:c:func:`free` directly --- rather, it makes a call through a function pointer in
 the object's :dfn:`type object`.  For this purpose (and others), every object
 also contains a pointer to its type object.
 
@@ -871,13 +871,13 @@
 Let's first introduce some terms.  Nobody "owns" an object; however, you can
 :dfn:`own a reference` to an object.  An object's reference count is now defined
 as the number of owned references to it.  The owner of a reference is
-responsible for calling :cfunc:`Py_DECREF` when the reference is no longer
+responsible for calling :c:func:`Py_DECREF` when the reference is no longer
 needed.  Ownership of a reference can be transferred.  There are three ways to
-dispose of an owned reference: pass it on, store it, or call :cfunc:`Py_DECREF`.
+dispose of an owned reference: pass it on, store it, or call :c:func:`Py_DECREF`.
 Forgetting to dispose of an owned reference creates a memory leak.
 
 It is also possible to :dfn:`borrow` [#]_ a reference to an object.  The
-borrower of a reference should not call :cfunc:`Py_DECREF`.  The borrower must
+borrower of a reference should not call :c:func:`Py_DECREF`.  The borrower must
 not hold on to the object longer than the owner from which it was borrowed.
 Using a borrowed reference after the owner has disposed of it risks using freed
 memory and should be avoided completely. [#]_
@@ -891,7 +891,7 @@
 disposed of it.
 
 A borrowed reference can be changed into an owned reference by calling
-:cfunc:`Py_INCREF`.  This does not affect the status of the owner from which the
+:c:func:`Py_INCREF`.  This does not affect the status of the owner from which the
 reference was borrowed --- it creates a new owned reference, and gives full
 owner responsibilities (the new owner must dispose of the reference properly, as
 well as the previous owner).
@@ -908,36 +908,36 @@
 
 Most functions that return a reference to an object pass on ownership with the
 reference.  In particular, all functions whose function it is to create a new
-object, such as :cfunc:`PyInt_FromLong` and :cfunc:`Py_BuildValue`, pass
+object, such as :c:func:`PyInt_FromLong` and :c:func:`Py_BuildValue`, pass
 ownership to the receiver.  Even if the object is not actually new, you still
 receive ownership of a new reference to that object.  For instance,
-:cfunc:`PyInt_FromLong` maintains a cache of popular values and can return a
+:c:func:`PyInt_FromLong` maintains a cache of popular values and can return a
 reference to a cached item.
 
 Many functions that extract objects from other objects also transfer ownership
-with the reference, for instance :cfunc:`PyObject_GetAttrString`.  The picture
+with the reference, for instance :c:func:`PyObject_GetAttrString`.  The picture
 is less clear, here, however, since a few common routines are exceptions:
-:cfunc:`PyTuple_GetItem`, :cfunc:`PyList_GetItem`, :cfunc:`PyDict_GetItem`, and
-:cfunc:`PyDict_GetItemString` all return references that you borrow from the
+:c:func:`PyTuple_GetItem`, :c:func:`PyList_GetItem`, :c:func:`PyDict_GetItem`, and
+:c:func:`PyDict_GetItemString` all return references that you borrow from the
 tuple, list or dictionary.
 
-The function :cfunc:`PyImport_AddModule` also returns a borrowed reference, even
+The function :c:func:`PyImport_AddModule` also returns a borrowed reference, even
 though it may actually create the object it returns: this is possible because an
 owned reference to the object is stored in ``sys.modules``.
 
 When you pass an object reference into another function, in general, the
 function borrows the reference from you --- if it needs to store it, it will use
-:cfunc:`Py_INCREF` to become an independent owner.  There are exactly two
-important exceptions to this rule: :cfunc:`PyTuple_SetItem` and
-:cfunc:`PyList_SetItem`.  These functions take over ownership of the item passed
-to them --- even if they fail!  (Note that :cfunc:`PyDict_SetItem` and friends
+:c:func:`Py_INCREF` to become an independent owner.  There are exactly two
+important exceptions to this rule: :c:func:`PyTuple_SetItem` and
+:c:func:`PyList_SetItem`.  These functions take over ownership of the item passed
+to them --- even if they fail!  (Note that :c:func:`PyDict_SetItem` and friends
 don't take over ownership --- they are "normal.")
 
 When a C function is called from Python, it borrows references to its arguments
 from the caller.  The caller owns a reference to the object, so the borrowed
 reference's lifetime is guaranteed until the function returns.  Only when such a
 borrowed reference must be stored or passed on, it must be turned into an owned
-reference by calling :cfunc:`Py_INCREF`.
+reference by calling :c:func:`Py_INCREF`.
 
 The object reference returned from a C function that is called from Python must
 be an owned reference --- ownership is transferred from the function to its
@@ -953,7 +953,7 @@
 can lead to problems.  These all have to do with implicit invocations of the
 interpreter, which can cause the owner of a reference to dispose of it.
 
-The first and most important case to know about is using :cfunc:`Py_DECREF` on
+The first and most important case to know about is using :c:func:`Py_DECREF` on
 an unrelated object while borrowing a reference to a list item.  For instance::
 
    void
@@ -969,7 +969,7 @@
 ``list[1]`` with the value ``0``, and finally prints the borrowed reference.
 Looks harmless, right?  But it's not!
 
-Let's follow the control flow into :cfunc:`PyList_SetItem`.  The list owns
+Let's follow the control flow into :c:func:`PyList_SetItem`.  The list owns
 references to all its items, so when item 1 is replaced, it has to dispose of
 the original item 1.  Now let's suppose the original item 1 was an instance of a
 user-defined class, and let's further suppose that the class defined a
@@ -978,8 +978,8 @@
 
 Since it is written in Python, the :meth:`__del__` method can execute arbitrary
 Python code.  Could it perhaps do something to invalidate the reference to
-``item`` in :cfunc:`bug`?  You bet!  Assuming that the list passed into
-:cfunc:`bug` is accessible to the :meth:`__del__` method, it could execute a
+``item`` in :c:func:`bug`?  You bet!  Assuming that the list passed into
+:c:func:`bug` is accessible to the :meth:`__del__` method, it could execute a
 statement to the effect of ``del list[0]``, and assuming this was the last
 reference to that object, it would free the memory associated with it, thereby
 invalidating ``item``.
@@ -1006,8 +1006,8 @@
 threads.  Normally, multiple threads in the Python interpreter can't get in each
 other's way, because there is a global lock protecting Python's entire object
 space.  However, it is possible to temporarily release this lock using the macro
-:cmacro:`Py_BEGIN_ALLOW_THREADS`, and to re-acquire it using
-:cmacro:`Py_END_ALLOW_THREADS`.  This is common around blocking I/O calls, to
+:c:macro:`Py_BEGIN_ALLOW_THREADS`, and to re-acquire it using
+:c:macro:`Py_END_ALLOW_THREADS`.  This is common around blocking I/O calls, to
 let other threads use the processor while waiting for the I/O to complete.
 Obviously, the following function has the same problem as the previous one::
 
@@ -1036,11 +1036,11 @@
 redundant tests and the code would run more slowly.
 
 It is better to test for *NULL* only at the "source:" when a pointer that may be
-*NULL* is received, for example, from :cfunc:`malloc` or from a function that
+*NULL* is received, for example, from :c:func:`malloc` or from a function that
 may raise an exception.
 
-The macros :cfunc:`Py_INCREF` and :cfunc:`Py_DECREF` do not check for *NULL*
-pointers --- however, their variants :cfunc:`Py_XINCREF` and :cfunc:`Py_XDECREF`
+The macros :c:func:`Py_INCREF` and :c:func:`Py_DECREF` do not check for *NULL*
+pointers --- however, their variants :c:func:`Py_XINCREF` and :c:func:`Py_XDECREF`
 do.
 
 The macros for checking for a particular object type (``Pytype_Check()``) don't
@@ -1114,7 +1114,7 @@
 
 Python provides a special mechanism to pass C-level information (pointers) from
 one extension module to another one: Capsules. A Capsule is a Python data type
-which stores a pointer (:ctype:`void \*`).  Capsules can only be created and
+which stores a pointer (:c:type:`void \*`).  Capsules can only be created and
 accessed via their C API, but they can be passed around like any other Python
 object. In particular,  they can be assigned to a name in an extension module's
 namespace. Other extension modules can then import this module, retrieve the
@@ -1127,8 +1127,8 @@
 different ways between the module providing the code and the client modules.
 
 Whichever method you choose, it's important to name your Capsules properly.
-The function :cfunc:`PyCapsule_New` takes a name parameter
-(:ctype:`const char \*`); you're permitted to pass in a *NULL* name, but
+The function :c:func:`PyCapsule_New` takes a name parameter
+(:c:type:`const char \*`); you're permitted to pass in a *NULL* name, but
 we strongly encourage you to specify a name.  Properly named Capsules provide
 a degree of runtime type-safety; there is no feasible way to tell one unnamed
 Capsule from another.
@@ -1138,7 +1138,7 @@
 
     modulename.attributename
 
-The convenience function :cfunc:`PyCapsule_Import` makes it easy to
+The convenience function :c:func:`PyCapsule_Import` makes it easy to
 load a C API provided via a Capsule, but only if the Capsule's name
 matches this convention.  This behavior gives C API users a high degree
 of certainty that the Capsule they load contains the correct C API.
@@ -1146,19 +1146,19 @@
 The following example demonstrates an approach that puts most of the burden on
 the writer of the exporting module, which is appropriate for commonly used
 library modules. It stores all C API pointers (just one in the example!) in an
-array of :ctype:`void` pointers which becomes the value of a Capsule. The header
+array of :c:type:`void` pointers which becomes the value of a Capsule. The header
 file corresponding to the module provides a macro that takes care of importing
 the module and retrieving its C API pointers; client modules only have to call
 this macro before accessing the C API.
 
 The exporting module is a modification of the :mod:`spam` module from section
 :ref:`extending-simpleexample`. The function :func:`spam.system` does not call
-the C library function :cfunc:`system` directly, but a function
-:cfunc:`PySpam_System`, which would of course do something more complicated in
+the C library function :c:func:`system` directly, but a function
+:c:func:`PySpam_System`, which would of course do something more complicated in
 reality (such as adding "spam" to every command). This function
-:cfunc:`PySpam_System` is also exported to other extension modules.
+:c:func:`PySpam_System` is also exported to other extension modules.
 
-The function :cfunc:`PySpam_System` is a plain C function, declared
+The function :c:func:`PySpam_System` is a plain C function, declared
 ``static`` like everything else::
 
    static int
@@ -1167,7 +1167,7 @@
        return system(command);
    }
 
-The function :cfunc:`spam_system` is modified in a trivial way::
+The function :c:func:`spam_system` is modified in a trivial way::
 
    static PyObject *
    spam_system(PyObject *self, PyObject *args)
@@ -1270,8 +1270,8 @@
    #endif /* !defined(Py_SPAMMODULE_H) */
 
 All that a client module must do in order to have access to the function
-:cfunc:`PySpam_System` is to call the function (or rather macro)
-:cfunc:`import_spam` in its initialization function::
+:c:func:`PySpam_System` is to call the function (or rather macro)
+:c:func:`import_spam` in its initialization function::
 
    PyMODINIT_FUNC
    initclient(void)
diff --git a/Doc/extending/newtypes.rst b/Doc/extending/newtypes.rst
index f4c3c02..f18814f 100644
--- a/Doc/extending/newtypes.rst
+++ b/Doc/extending/newtypes.rst
@@ -34,7 +34,7 @@
 ==========
 
 The Python runtime sees all Python objects as variables of type
-:ctype:`PyObject\*`.  A :ctype:`PyObject` is not a very magnificent object - it
+:c:type:`PyObject\*`.  A :c:type:`PyObject` is not a very magnificent object - it
 just contains the refcount and a pointer to the object's "type object".  This is
 where the action is; the type object determines which (C) functions get called
 when, for instance, an attribute gets looked up on an object or it is multiplied
@@ -103,7 +103,7 @@
        "Noddy objects",           /* tp_doc */
    };
 
-Now if you go and look up the definition of :ctype:`PyTypeObject` in
+Now if you go and look up the definition of :c:type:`PyTypeObject` in
 :file:`object.h` you'll see that it has many more fields that the definition
 above.  The remaining fields will be filled with zeros by the C compiler, and
 it's common practice to not specify them explicitly unless you need them.
@@ -119,7 +119,7 @@
 
 as the type of a type object is "type", but this isn't strictly conforming C and
 some compilers complain.  Fortunately, this member will be filled in for us by
-:cfunc:`PyType_Ready`. ::
+:c:func:`PyType_Ready`. ::
 
    0,                          /* ob_size */
 
@@ -145,7 +145,7 @@
    sizeof(noddy_NoddyObject),  /* tp_basicsize */
 
 This is so that Python knows how much memory to allocate when you call
-:cfunc:`PyObject_New`.
+:c:func:`PyObject_New`.
 
 .. note::
 
@@ -185,12 +185,12 @@
 For now, all we want to be able to do is to create new :class:`Noddy` objects.
 To enable object creation, we have to provide a :attr:`tp_new` implementation.
 In this case, we can just use the default implementation provided by the API
-function :cfunc:`PyType_GenericNew`.  We'd like to just assign this to the
+function :c:func:`PyType_GenericNew`.  We'd like to just assign this to the
 :attr:`tp_new` slot, but we can't, for portability sake, On some platforms or
 compilers, we can't statically initialize a structure member with a function
 defined in another C module, so, instead, we'll assign the :attr:`tp_new` slot
 in the module initialization function just before calling
-:cfunc:`PyType_Ready`::
+:c:func:`PyType_Ready`::
 
    noddy_NoddyType.tp_new = PyType_GenericNew;
    if (PyType_Ready(&noddy_NoddyType) < 0)
@@ -200,7 +200,7 @@
 for a later section!
 
 Everything else in the file should be familiar, except for some code in
-:cfunc:`initnoddy`::
+:c:func:`initnoddy`::
 
    if (PyType_Ready(&noddy_NoddyType) < 0)
        return;
@@ -288,7 +288,7 @@
    (destructor)Noddy_dealloc, /*tp_dealloc*/
 
 This method decrements the reference counts of the two Python attributes. We use
-:cfunc:`Py_XDECREF` here because the :attr:`first` and :attr:`last` members
+:c:func:`Py_XDECREF` here because the :attr:`first` and :attr:`last` members
 could be *NULL*.  It then calls the :attr:`tp_free` member of the object's type
 to free the object's memory.  Note that the object's type might not be
 :class:`NoddyType`, because the object may be an instance of a subclass.
@@ -334,8 +334,8 @@
 the initial values of instance variables.  In this case, we use the new method
 to make sure that the initial values of the members :attr:`first` and
 :attr:`last` are not *NULL*. If we didn't care whether the initial values were
-*NULL*, we could have used :cfunc:`PyType_GenericNew` as our new method, as we
-did before.  :cfunc:`PyType_GenericNew` initializes all of the instance variable
+*NULL*, we could have used :c:func:`PyType_GenericNew` as our new method, as we
+did before.  :c:func:`PyType_GenericNew` initializes all of the instance variable
 members to *NULL*.
 
 The new method is a static method that is passed the type being instantiated and
@@ -345,7 +345,7 @@
 methods. Note that if the type supports subclassing, the type passed may not be
 the type being defined.  The new method calls the tp_alloc slot to allocate
 memory. We don't fill the :attr:`tp_alloc` slot ourselves. Rather
-:cfunc:`PyType_Ready` fills it for us by inheriting it from our base class,
+:c:func:`PyType_Ready` fills it for us by inheriting it from our base class,
 which is :class:`object` by default.  Most types use the default allocation.
 
 .. note::
@@ -530,8 +530,8 @@
 
    Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE, /*tp_flags*/
 
-We rename :cfunc:`initnoddy` to :cfunc:`initnoddy2` and update the module name
-passed to :cfunc:`Py_InitModule3`.
+We rename :c:func:`initnoddy` to :c:func:`initnoddy2` and update the module name
+passed to :c:func:`Py_InitModule3`.
 
 Finally, we update our :file:`setup.py` file to build the new module::
 
@@ -597,7 +597,7 @@
 deleted.  In our setter, we raise an error if the attribute is deleted or if the
 attribute value is not a string.
 
-We create an array of :ctype:`PyGetSetDef` structures::
+We create an array of :c:type:`PyGetSetDef` structures::
 
    static PyGetSetDef Noddy_getseters[] = {
        {"first",
@@ -617,7 +617,7 @@
 
 to register our attribute getters and setters.
 
-The last item in a :ctype:`PyGetSetDef` structure is the closure mentioned
+The last item in a :c:type:`PyGetSetDef` structure is the closure mentioned
 above. In this case, we aren't using the closure, so we just pass *NULL*.
 
 We also remove the member definitions for these attributes::
@@ -662,8 +662,8 @@
 
 With these changes, we can assure that the :attr:`first` and :attr:`last`
 members are never *NULL* so we can remove checks for *NULL* values in almost all
-cases. This means that most of the :cfunc:`Py_XDECREF` calls can be converted to
-:cfunc:`Py_DECREF` calls. The only place we can't change these calls is in the
+cases. This means that most of the :c:func:`Py_XDECREF` calls can be converted to
+:c:func:`Py_DECREF` calls. The only place we can't change these calls is in the
 deallocator, where there is the possibility that the initialization of these
 members failed in the constructor.
 
@@ -728,13 +728,13 @@
    }
 
 For each subobject that can participate in cycles, we need to call the
-:cfunc:`visit` function, which is passed to the traversal method. The
-:cfunc:`visit` function takes as arguments the subobject and the extra argument
+:c:func:`visit` function, which is passed to the traversal method. The
+:c:func:`visit` function takes as arguments the subobject and the extra argument
 *arg* passed to the traversal method.  It returns an integer value that must be
 returned if it is non-zero.
 
-Python 2.4 and higher provide a :cfunc:`Py_VISIT` macro that automates calling
-visit functions.  With :cfunc:`Py_VISIT`, :cfunc:`Noddy_traverse` can be
+Python 2.4 and higher provide a :c:func:`Py_VISIT` macro that automates calling
+visit functions.  With :c:func:`Py_VISIT`, :c:func:`Noddy_traverse` can be
 simplified::
 
    static int
@@ -748,7 +748,7 @@
 .. note::
 
    Note that the :attr:`tp_traverse` implementation must name its arguments exactly
-   *visit* and *arg* in order to use :cfunc:`Py_VISIT`.  This is to encourage
+   *visit* and *arg* in order to use :c:func:`Py_VISIT`.  This is to encourage
    uniformity across these boring implementations.
 
 We also need to provide a method for clearing any subobjects that can
@@ -778,19 +778,19 @@
        self->ob_type->tp_free((PyObject*)self);
    }
 
-Notice the use of a temporary variable in :cfunc:`Noddy_clear`. We use the
+Notice the use of a temporary variable in :c:func:`Noddy_clear`. We use the
 temporary variable so that we can set each member to *NULL* before decrementing
 its reference count.  We do this because, as was discussed earlier, if the
 reference count drops to zero, we might cause code to run that calls back into
 the object.  In addition, because we now support garbage collection, we also
 have to worry about code being run that triggers garbage collection.  If garbage
 collection is run, our :attr:`tp_traverse` handler could get called. We can't
-take a chance of having :cfunc:`Noddy_traverse` called when a member's reference
+take a chance of having :c:func:`Noddy_traverse` called when a member's reference
 count has dropped to zero and its value hasn't been set to *NULL*.
 
-Python 2.4 and higher provide a :cfunc:`Py_CLEAR` that automates the careful
-decrementing of reference counts.  With :cfunc:`Py_CLEAR`, the
-:cfunc:`Noddy_clear` function can be simplified::
+Python 2.4 and higher provide a :c:func:`Py_CLEAR` that automates the careful
+decrementing of reference counts.  With :c:func:`Py_CLEAR`, the
+:c:func:`Noddy_clear` function can be simplified::
 
    static int
    Noddy_clear(Noddy *self)
@@ -845,7 +845,7 @@
 
 The primary difference for derived type objects is that the base type's object
 structure must be the first value. The base type will already include the
-:cfunc:`PyObject_HEAD` at the beginning of its structure.
+:c:func:`PyObject_HEAD` at the beginning of its structure.
 
 When a Python object is a :class:`Shoddy` instance, its *PyObject\** pointer can
 be safely cast to both *PyListObject\** and *Shoddy\**. ::
@@ -867,10 +867,10 @@
 memory for the object with :attr:`tp_alloc`, that will be handled by the base
 class when calling its :attr:`tp_new`.
 
-When filling out the :cfunc:`PyTypeObject` for the :class:`Shoddy` type, you see
-a slot for :cfunc:`tp_base`. Due to cross platform compiler issues, you can't
-fill that field directly with the :cfunc:`PyList_Type`; it can be done later in
-the module's :cfunc:`init` function. ::
+When filling out the :c:func:`PyTypeObject` for the :class:`Shoddy` type, you see
+a slot for :c:func:`tp_base`. Due to cross platform compiler issues, you can't
+fill that field directly with the :c:func:`PyList_Type`; it can be done later in
+the module's :c:func:`init` function. ::
 
    PyMODINIT_FUNC
    initshoddy(void)
@@ -889,12 +889,12 @@
        PyModule_AddObject(m, "Shoddy", (PyObject *) &ShoddyType);
    }
 
-Before calling :cfunc:`PyType_Ready`, the type structure must have the
+Before calling :c:func:`PyType_Ready`, the type structure must have the
 :attr:`tp_base` slot filled in. When we are deriving a new type, it is not
-necessary to fill out the :attr:`tp_alloc` slot with :cfunc:`PyType_GenericNew`
+necessary to fill out the :attr:`tp_alloc` slot with :c:func:`PyType_GenericNew`
 -- the allocate function from the base type will be inherited.
 
-After that, calling :cfunc:`PyType_Ready` and adding the type object to the
+After that, calling :c:func:`PyType_Ready` and adding the type object to the
 module is the same as with the basic :class:`Noddy` examples.
 
 
@@ -906,7 +906,7 @@
 This section aims to give a quick fly-by on the various type methods you can
 implement and what they do.
 
-Here is the definition of :ctype:`PyTypeObject`, with some fields only used in
+Here is the definition of :c:type:`PyTypeObject`, with some fields only used in
 debug builds omitted:
 
 .. literalinclude:: ../includes/typestruct.h
@@ -984,8 +984,8 @@
 executed may detect that an exception has been set.  This can lead to misleading
 errors from the interpreter.  The proper way to protect against this is to save
 a pending exception before performing the unsafe action, and restoring it when
-done.  This can be done using the :cfunc:`PyErr_Fetch` and
-:cfunc:`PyErr_Restore` functions::
+done.  This can be done using the :c:func:`PyErr_Fetch` and
+:c:func:`PyErr_Restore` functions::
 
    static void
    my_dealloc(PyObject *obj)
@@ -1026,7 +1026,7 @@
 object: the :func:`repr` function (or equivalent back-tick syntax), the
 :func:`str` function, and the :keyword:`print` statement.  For most objects, the
 :keyword:`print` statement is equivalent to the :func:`str` function, but it is
-possible to special-case printing to a :ctype:`FILE\*` if necessary; this should
+possible to special-case printing to a :c:type:`FILE\*` if necessary; this should
 only be done if efficiency is identified as a problem and profiling suggests
 that creating a temporary string object to be written to a file is too
 expensive.
@@ -1110,8 +1110,8 @@
 
 Python supports two pairs of attribute handlers; a type that supports attributes
 only needs to implement the functions for one pair.  The difference is that one
-pair takes the name of the attribute as a :ctype:`char\*`, while the other
-accepts a :ctype:`PyObject\*`.  Each type can use whichever pair makes more
+pair takes the name of the attribute as a :c:type:`char\*`, while the other
+accepts a :c:type:`PyObject\*`.  Each type can use whichever pair makes more
 sense for the implementation's convenience. ::
 
    getattrfunc  tp_getattr;        /* char * version */
@@ -1122,7 +1122,7 @@
 
 If accessing attributes of an object is always a simple operation (this will be
 explained shortly), there are generic implementations which can be used to
-provide the :ctype:`PyObject\*` version of the attribute management functions.
+provide the :c:type:`PyObject\*` version of the attribute management functions.
 The actual need for type-specific attribute handlers almost completely
 disappeared starting with Python 2.2, though there are many examples which have
 not been updated to use some of the new generic mechanism that is available.
@@ -1138,7 +1138,7 @@
 Most extension types only use *simple* attributes.  So, what makes the
 attributes simple?  There are only a couple of conditions that must be met:
 
-#. The name of the attributes must be known when :cfunc:`PyType_Ready` is
+#. The name of the attributes must be known when :c:func:`PyType_Ready` is
    called.
 
 #. No special processing is needed to record that an attribute was looked up or
@@ -1147,7 +1147,7 @@
 Note that this list does not place any restrictions on the values of the
 attributes, when the values are computed, or how relevant data is stored.
 
-When :cfunc:`PyType_Ready` is called, it uses three tables referenced by the
+When :c:func:`PyType_Ready` is called, it uses three tables referenced by the
 type object to create :term:`descriptor`\s which are placed in the dictionary of the
 type object.  Each descriptor controls access to one attribute of the instance
 object.  Each of the tables is optional; if all three are *NULL*, instances of
@@ -1162,7 +1162,7 @@
    struct PyGetSetDef *tp_getset;
 
 If :attr:`tp_methods` is not *NULL*, it must refer to an array of
-:ctype:`PyMethodDef` structures.  Each entry in the table is an instance of this
+:c:type:`PyMethodDef` structures.  Each entry in the table is an instance of this
 structure::
 
    typedef struct PyMethodDef {
@@ -1247,9 +1247,9 @@
 Type-specific Attribute Management
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-For simplicity, only the :ctype:`char\*` version will be demonstrated here; the
-type of the name parameter is the only difference between the :ctype:`char\*`
-and :ctype:`PyObject\*` flavors of the interface. This example effectively does
+For simplicity, only the :c:type:`char\*` version will be demonstrated here; the
+type of the name parameter is the only difference between the :c:type:`char\*`
+and :c:type:`PyObject\*` flavors of the interface. This example effectively does
 the same thing as the generic example above, but does not use the generic
 support added in Python 2.2.  The value in showing this is two-fold: it
 demonstrates how basic attribute management can be done in a way that is
@@ -1262,7 +1262,7 @@
 method of a class would be called.
 
 A likely way to handle this is (1) to implement a set of functions (such as
-:cfunc:`newdatatype_getSize` and :cfunc:`newdatatype_setSize` in the example
+:c:func:`newdatatype_getSize` and :c:func:`newdatatype_setSize` in the example
 below), (2) provide a method table listing these functions, and (3) provide a
 getattr function that returns the result of a lookup in that table.  The method
 table uses the same structure as the :attr:`tp_methods` field of the type
@@ -1308,7 +1308,7 @@
 The :attr:`tp_compare` handler is called when comparisons are needed and the
 object does not implement the specific rich comparison method which matches the
 requested comparison.  (It is always used if defined and the
-:cfunc:`PyObject_Compare` or :cfunc:`PyObject_Cmp` functions are used, or if
+:c:func:`PyObject_Compare` or :c:func:`PyObject_Cmp` functions are used, or if
 :func:`cmp` is used from Python.) It is analogous to the :meth:`__cmp__` method.
 This function should return ``-1`` if *obj1* is less than *obj2*, ``0`` if they
 are equal, and ``1`` if *obj1* is greater than *obj2*. (It was previously
@@ -1318,7 +1318,7 @@
 
 A :attr:`tp_compare` handler may raise an exception.  In this case it should
 return a negative value.  The caller has to test for the exception using
-:cfunc:`PyErr_Occurred`.
+:c:func:`PyErr_Occurred`.
 
 Here is a sample implementation::
 
@@ -1366,8 +1366,8 @@
 
 If you wish your object to be able to act like a number, a sequence, or a
 mapping object, then you place the address of a structure that implements the C
-type :ctype:`PyNumberMethods`, :ctype:`PySequenceMethods`, or
-:ctype:`PyMappingMethods`, respectively. It is up to you to fill in this
+type :c:type:`PyNumberMethods`, :c:type:`PySequenceMethods`, or
+:c:type:`PyMappingMethods`, respectively. It is up to you to fill in this
 structure with appropriate values. You can find examples of the use of each of
 these in the :file:`Objects` directory of the Python source distribution. ::
 
@@ -1399,11 +1399,11 @@
    the call is ``obj1('hello')``, then *arg1* is ``obj1``.
 
 #. *arg2* is a tuple containing the arguments to the call.  You can use
-   :cfunc:`PyArg_ParseTuple` to extract the arguments.
+   :c:func:`PyArg_ParseTuple` to extract the arguments.
 
 #. *arg3* is a dictionary of keyword arguments that were passed. If this is
    non-*NULL* and you support keyword arguments, use
-   :cfunc:`PyArg_ParseTupleAndKeywords` to extract the arguments.  If you do not
+   :c:func:`PyArg_ParseTupleAndKeywords` to extract the arguments.  If you do not
    want to support keyword arguments and this is non-*NULL*, raise a
    :exc:`TypeError` with a message saying that keyword arguments are not supported.
 
@@ -1478,7 +1478,7 @@
 those objects which do not benefit by weak referencing (such as numbers).
 
 For an object to be weakly referencable, the extension must include a
-:ctype:`PyObject\*` field in the instance structure for the use of the weak
+:c:type:`PyObject\*` field in the instance structure for the use of the weak
 reference mechanism; it must be initialized to *NULL* by the object's
 constructor.  It must also set the :attr:`tp_weaklistoffset` field of the
 corresponding type object to the offset of the field. For example, the instance
@@ -1554,7 +1554,7 @@
 examples of the function you want to implement.
 
 When you need to verify that an object is an instance of the type you are
-implementing, use the :cfunc:`PyObject_TypeCheck` function. A sample of its use
+implementing, use the :c:func:`PyObject_TypeCheck` function. A sample of its use
 might be something like the following::
 
    if (! PyObject_TypeCheck(some_object, &MyType)) {
diff --git a/Doc/extending/windows.rst b/Doc/extending/windows.rst
index beb2ee4..66b518d 100644
--- a/Doc/extending/windows.rst
+++ b/Doc/extending/windows.rst
@@ -98,8 +98,8 @@
    it.  Copy your C sources into it.  Note that the module source file name does
    not necessarily have to match the module name, but the name of the
    initialization function should match the module name --- you can only import a
-   module :mod:`spam` if its initialization function is called :cfunc:`initspam`,
-   and it should call :cfunc:`Py_InitModule` with the string ``"spam"`` as its
+   module :mod:`spam` if its initialization function is called :c:func:`initspam`,
+   and it should call :c:func:`Py_InitModule` with the string ``"spam"`` as its
    first argument (use the minimal :file:`example.c` in this directory as a guide).
    By convention, it lives in a file called :file:`spam.c` or :file:`spammodule.c`.
    The output file should be called :file:`spam.pyd` (in Release mode) or
@@ -263,7 +263,7 @@
 
 The first command created three files: :file:`spam.obj`, :file:`spam.dll` and
 :file:`spam.lib`.  :file:`Spam.dll` does not contain any Python functions (such
-as :cfunc:`PyArg_ParseTuple`), but it does know how to find the Python code
+as :c:func:`PyArg_ParseTuple`), but it does know how to find the Python code
 thanks to :file:`pythonXY.lib`.
 
 The second command created :file:`ni.dll` (and :file:`.obj` and :file:`.lib`),
diff --git a/Doc/faq/extending.rst b/Doc/faq/extending.rst
index be5c51c..b79d716 100644
--- a/Doc/faq/extending.rst
+++ b/Doc/faq/extending.rst
@@ -60,41 +60,41 @@
 How can I execute arbitrary Python statements from C?
 -----------------------------------------------------
 
-The highest-level function to do this is :cfunc:`PyRun_SimpleString` which takes
+The highest-level function to do this is :c:func:`PyRun_SimpleString` which takes
 a single string argument to be executed in the context of the module
 ``__main__`` and returns 0 for success and -1 when an exception occurred
 (including ``SyntaxError``).  If you want more control, use
-:cfunc:`PyRun_String`; see the source for :cfunc:`PyRun_SimpleString` in
+:c:func:`PyRun_String`; see the source for :c:func:`PyRun_SimpleString` in
 ``Python/pythonrun.c``.
 
 
 How can I evaluate an arbitrary Python expression from C?
 ---------------------------------------------------------
 
-Call the function :cfunc:`PyRun_String` from the previous question with the
-start symbol :cdata:`Py_eval_input`; it parses an expression, evaluates it and
+Call the function :c:func:`PyRun_String` from the previous question with the
+start symbol :c:data:`Py_eval_input`; it parses an expression, evaluates it and
 returns its value.
 
 
 How do I extract C values from a Python object?
 -----------------------------------------------
 
-That depends on the object's type.  If it's a tuple, :cfunc:`PyTuple_Size`
-returns its length and :cfunc:`PyTuple_GetItem` returns the item at a specified
-index.  Lists have similar functions, :cfunc:`PyListSize` and
-:cfunc:`PyList_GetItem`.
+That depends on the object's type.  If it's a tuple, :c:func:`PyTuple_Size`
+returns its length and :c:func:`PyTuple_GetItem` returns the item at a specified
+index.  Lists have similar functions, :c:func:`PyListSize` and
+:c:func:`PyList_GetItem`.
 
-For strings, :cfunc:`PyString_Size` returns its length and
-:cfunc:`PyString_AsString` a pointer to its value.  Note that Python strings may
-contain null bytes so C's :cfunc:`strlen` should not be used.
+For strings, :c:func:`PyString_Size` returns its length and
+:c:func:`PyString_AsString` a pointer to its value.  Note that Python strings may
+contain null bytes so C's :c:func:`strlen` should not be used.
 
 To test the type of an object, first make sure it isn't *NULL*, and then use
-:cfunc:`PyString_Check`, :cfunc:`PyTuple_Check`, :cfunc:`PyList_Check`, etc.
+:c:func:`PyString_Check`, :c:func:`PyTuple_Check`, :c:func:`PyList_Check`, etc.
 
 There is also a high-level API to Python objects which is provided by the
 so-called 'abstract' interface -- read ``Include/abstract.h`` for further
 details.  It allows interfacing with any kind of Python sequence using calls
-like :cfunc:`PySequence_Length`, :cfunc:`PySequence_GetItem`, etc.)  as well as
+like :c:func:`PySequence_Length`, :c:func:`PySequence_GetItem`, etc.)  as well as
 many other useful protocols.
 
 
@@ -103,7 +103,7 @@
 
 You can't.  Use ``t = PyTuple_New(n)`` instead, and fill it with objects using
 ``PyTuple_SetItem(t, i, o)`` -- note that this "eats" a reference count of
-``o``, so you have to :cfunc:`Py_INCREF` it.  Lists have similar functions
+``o``, so you have to :c:func:`Py_INCREF` it.  Lists have similar functions
 ``PyList_New(n)`` and ``PyList_SetItem(l, i, o)``.  Note that you *must* set all
 the tuple items to some value before you pass the tuple to Python code --
 ``PyTuple_New(n)`` initializes them to NULL, which isn't a valid Python value.
@@ -112,9 +112,9 @@
 How do I call an object's method from C?
 ----------------------------------------
 
-The :cfunc:`PyObject_CallMethod` function can be used to call an arbitrary
+The :c:func:`PyObject_CallMethod` function can be used to call an arbitrary
 method of an object.  The parameters are the object, the name of the method to
-call, a format string like that used with :cfunc:`Py_BuildValue`, and the
+call, a format string like that used with :c:func:`Py_BuildValue`, and the
 argument values::
 
    PyObject *
@@ -122,7 +122,7 @@
                        char *arg_format, ...);
 
 This works for any object that has methods -- whether built-in or user-defined.
-You are responsible for eventually :cfunc:`Py_DECREF`\ 'ing the return value.
+You are responsible for eventually :c:func:`Py_DECREF`\ 'ing the return value.
 
 To call, e.g., a file object's "seek" method with arguments 10, 0 (assuming the
 file object pointer is "f")::
@@ -135,7 +135,7 @@
            Py_DECREF(res);
    }
 
-Note that since :cfunc:`PyObject_CallObject` *always* wants a tuple for the
+Note that since :c:func:`PyObject_CallObject` *always* wants a tuple for the
 argument list, to call a function without arguments, pass "()" for the format,
 and to call a function with one argument, surround the argument in parentheses,
 e.g. "(i)".
@@ -186,7 +186,7 @@
 
    attr = PyObject_GetAttrString(module, "<attrname>");
 
-Calling :cfunc:`PyObject_SetAttrString` to assign to variables in the module
+Calling :c:func:`PyObject_SetAttrString` to assign to variables in the module
 also works.
 
 
@@ -267,16 +267,16 @@
 In Python you can use the :mod:`codeop` module, which approximates the parser's
 behavior sufficiently.  IDLE uses this, for example.
 
-The easiest way to do it in C is to call :cfunc:`PyRun_InteractiveLoop` (perhaps
+The easiest way to do it in C is to call :c:func:`PyRun_InteractiveLoop` (perhaps
 in a separate thread) and let the Python interpreter handle the input for
-you. You can also set the :cfunc:`PyOS_ReadlineFunctionPointer` to point at your
+you. You can also set the :c:func:`PyOS_ReadlineFunctionPointer` to point at your
 custom input function. See ``Modules/readline.c`` and ``Parser/myreadline.c``
 for more hints.
 
 However sometimes you have to run the embedded Python interpreter in the same
 thread as your rest application and you can't allow the
-:cfunc:`PyRun_InteractiveLoop` to stop while waiting for user input.  The one
-solution then is to call :cfunc:`PyParser_ParseString` and test for ``e.error``
+:c:func:`PyRun_InteractiveLoop` to stop while waiting for user input.  The one
+solution then is to call :c:func:`PyParser_ParseString` and test for ``e.error``
 equal to ``E_EOF``, which means the input is incomplete).  Here's a sample code
 fragment, untested, inspired by code from Alex Farber::
 
@@ -307,8 +307,8 @@
    }
 
 Another solution is trying to compile the received string with
-:cfunc:`Py_CompileString`. If it compiles without errors, try to execute the
-returned code object by calling :cfunc:`PyEval_EvalCode`. Otherwise save the
+:c:func:`Py_CompileString`. If it compiles without errors, try to execute the
+returned code object by calling :c:func:`PyEval_EvalCode`. Otherwise save the
 input for later. If the compilation fails, find out if it's an error or just
 more input is required - by extracting the message string from the exception
 tuple and comparing it to the string "unexpected EOF while parsing".  Here is a
@@ -460,8 +460,8 @@
 7.x, in particular, provided a "python2" binary that is compiled with 4-byte
 Unicode.  This only causes the link failure if the extension uses any of the
 ``PyUnicode_*()`` functions.  It is also a problem if an extension uses any of
-the Unicode-related format specifiers for :cfunc:`Py_BuildValue` (or similar) or
-parameter specifications for :cfunc:`PyArg_ParseTuple`.
+the Unicode-related format specifiers for :c:func:`Py_BuildValue` (or similar) or
+parameter specifications for :c:func:`PyArg_ParseTuple`.
 
 You can check the size of the Unicode character a Python interpreter is using by
 checking the value of sys.maxunicode:
diff --git a/Doc/faq/gui.rst b/Doc/faq/gui.rst
index d37f480..50a30b0 100644
--- a/Doc/faq/gui.rst
+++ b/Doc/faq/gui.rst
@@ -117,7 +117,7 @@
 (http://tix.sourceforge.net/).
 
 Build Tix with SAM enabled, perform the appropriate call to
-:cfunc:`Tclsam_init`, etc. inside Python's
+:c:func:`Tclsam_init`, etc. inside Python's
 :file:`Modules/tkappinit.c`, and link with libtclsam and libtksam (you
 might include the Tix libraries as well).
 
@@ -126,7 +126,7 @@
 ---------------------------------------------------
 
 Yes, and you don't even need threads!  But you'll have to restructure your I/O
-code a bit.  Tk has the equivalent of Xt's :cfunc:`XtAddInput()` call, which allows you
+code a bit.  Tk has the equivalent of Xt's :c:func:`XtAddInput()` call, which allows you
 to register a callback function which will be called from the Tk mainloop when
 I/O is possible on a file descriptor.  Here's what you need::
 
diff --git a/Doc/faq/programming.rst b/Doc/faq/programming.rst
index 268b918..a0898c5 100644
--- a/Doc/faq/programming.rst
+++ b/Doc/faq/programming.rst
@@ -980,7 +980,7 @@
 if the line uses something other than whitespace as a separator.
 
 For more complicated input parsing, regular expressions are more powerful
-than C's :cfunc:`sscanf` and better suited for the task.
+than C's :c:func:`sscanf` and better suited for the task.
 
 
 What does 'UnicodeError: ASCII [decoding,encoding] error: ordinal not in range(128)' mean?
diff --git a/Doc/faq/windows.rst b/Doc/faq/windows.rst
index 96d1c51..dbb7bb8 100644
--- a/Doc/faq/windows.rst
+++ b/Doc/faq/windows.rst
@@ -537,7 +537,7 @@
 The Python 1.5.* DLLs (``python15.dll``) are all compiled with MS VC++ 5.0 and
 with multithreading-DLL options (``/MD``).
 
-If you can't change compilers or flags, try using :cfunc:`Py_RunSimpleString`.
+If you can't change compilers or flags, try using :c:func:`Py_RunSimpleString`.
 A trick to get it to run an arbitrary file is to construct a call to
 :func:`execfile` with the name of your file as argument.
 
diff --git a/Doc/howto/cporting.rst b/Doc/howto/cporting.rst
index 5ba5df7..7ef7537 100644
--- a/Doc/howto/cporting.rst
+++ b/Doc/howto/cporting.rst
@@ -22,7 +22,7 @@
 =======================
 
 The easiest way to compile only some code for 3.0 is to check if
-:cmacro:`PY_MAJOR_VERSION` is greater than or equal to 3. ::
+:c:macro:`PY_MAJOR_VERSION` is greater than or equal to 3. ::
 
    #if PY_MAJOR_VERSION >= 3
    #define IS_PY3K
@@ -47,12 +47,12 @@
 2.x's :func:`unicode` (``PyUnicode_*``).  The old 8-bit string type has become
 :func:`bytes`.  Python 2.6 and later provide a compatibility header,
 :file:`bytesobject.h`, mapping ``PyBytes`` names to ``PyString`` ones.  For best
-compatibility with 3.0, :ctype:`PyUnicode` should be used for textual data and
-:ctype:`PyBytes` for binary data.  It's also important to remember that
-:ctype:`PyBytes` and :ctype:`PyUnicode` in 3.0 are not interchangeable like
-:ctype:`PyString` and :ctype:`PyUnicode` are in 2.x.  The following example
-shows best practices with regards to :ctype:`PyUnicode`, :ctype:`PyString`,
-and :ctype:`PyBytes`. ::
+compatibility with 3.0, :c:type:`PyUnicode` should be used for textual data and
+:c:type:`PyBytes` for binary data.  It's also important to remember that
+:c:type:`PyBytes` and :c:type:`PyUnicode` in 3.0 are not interchangeable like
+:c:type:`PyString` and :c:type:`PyUnicode` are in 2.x.  The following example
+shows best practices with regards to :c:type:`PyUnicode`, :c:type:`PyString`,
+and :c:type:`PyBytes`. ::
 
    #include "stdlib.h"
    #include "Python.h"
@@ -212,43 +212,43 @@
 CObject replaced with Capsule
 =============================
 
-The :ctype:`Capsule` object was introduced in Python 3.1 and 2.7 to replace
-:ctype:`CObject`.  CObjects were useful,
-but the :ctype:`CObject` API was problematic: it didn't permit distinguishing
+The :c:type:`Capsule` object was introduced in Python 3.1 and 2.7 to replace
+:c:type:`CObject`.  CObjects were useful,
+but the :c:type:`CObject` API was problematic: it didn't permit distinguishing
 between valid CObjects, which allowed mismatched CObjects to crash the
 interpreter, and some of its APIs relied on undefined behavior in C.
 (For further reading on the rationale behind Capsules, please see :issue:`5630`.)
 
 If you're currently using CObjects, and you want to migrate to 3.1 or newer,
 you'll need to switch to Capsules.
-:ctype:`CObject` was deprecated in 3.1 and 2.7 and completely removed in
+:c:type:`CObject` was deprecated in 3.1 and 2.7 and completely removed in
 Python 3.2.  If you only support 2.7, or 3.1 and above, you
-can simply switch to :ctype:`Capsule`.  If you need to support 3.0 or
+can simply switch to :c:type:`Capsule`.  If you need to support 3.0 or
 versions of Python earlier than 2.7 you'll have to support both CObjects
 and Capsules.
 
 The following example header file :file:`capsulethunk.h` may
 solve the problem for you;
-simply write your code against the :ctype:`Capsule` API, include
+simply write your code against the :c:type:`Capsule` API, include
 this header file after ``"Python.h"``, and you'll automatically use CObjects
 in Python 3.0 or versions earlier than 2.7.
 
 :file:`capsulethunk.h` simulates Capsules using CObjects.  However,
-:ctype:`CObject` provides no place to store the capsule's "name".  As a
-result the simulated :ctype:`Capsule` objects created by :file:`capsulethunk.h`
+:c:type:`CObject` provides no place to store the capsule's "name".  As a
+result the simulated :c:type:`Capsule` objects created by :file:`capsulethunk.h`
 behave slightly differently from real Capsules.  Specifically:
 
-  * The name parameter passed in to :cfunc:`PyCapsule_New` is ignored.
+  * The name parameter passed in to :c:func:`PyCapsule_New` is ignored.
 
-  * The name parameter passed in to :cfunc:`PyCapsule_IsValid` and
-    :cfunc:`PyCapsule_GetPointer` is ignored, and no error checking
+  * The name parameter passed in to :c:func:`PyCapsule_IsValid` and
+    :c:func:`PyCapsule_GetPointer` is ignored, and no error checking
     of the name is performed.
 
-  * :cfunc:`PyCapsule_GetName` always returns NULL.
+  * :c:func:`PyCapsule_GetName` always returns NULL.
 
-  * :cfunc:`PyCapsule_SetName` always throws an exception and
+  * :c:func:`PyCapsule_SetName` always throws an exception and
     returns failure.  (Since there's no way to store a name
-    in a CObject, noisy failure of :cfunc:`PyCapsule_SetName`
+    in a CObject, noisy failure of :c:func:`PyCapsule_SetName`
     was deemed preferable to silent failure here.  If this is
     inconveient, feel free to modify your local
     copy as you see fit.)
diff --git a/Doc/howto/descriptor.rst b/Doc/howto/descriptor.rst
index 78c1439..ce4b6bb 100644
--- a/Doc/howto/descriptor.rst
+++ b/Doc/howto/descriptor.rst
@@ -97,7 +97,7 @@
 implementation works through a precedence chain that gives data descriptors
 priority over instance variables, instance variables priority over non-data
 descriptors, and assigns lowest priority to :meth:`__getattr__` if provided.  The
-full C implementation can be found in :cfunc:`PyObject_GenericGetAttr()` in
+full C implementation can be found in :c:func:`PyObject_GenericGetAttr()` in
 `Objects/object.c <http://svn.python.org/view/python/trunk/Objects/object.c?view=markup>`_\.
 
 For classes, the machinery is in :meth:`type.__getattribute__` which transforms
@@ -131,7 +131,7 @@
 Note, in Python 2.2, ``super(B, obj).m()`` would only invoke :meth:`__get__` if
 ``m`` was a data descriptor.  In Python 2.3, non-data descriptors also get
 invoked unless an old-style class is involved.  The implementation details are
-in :cfunc:`super_getattro()` in
+in :c:func:`super_getattro()` in
 `Objects/typeobject.c <http://svn.python.org/view/python/trunk/Objects/typeobject.c?view=markup>`_
 and a pure Python equivalent can be found in `Guido's Tutorial`_.
 
@@ -297,7 +297,7 @@
 
 The output suggests that bound and unbound methods are two different types.
 While they could have been implemented that way, the actual C implementation of
-:ctype:`PyMethod_Type` in
+:c:type:`PyMethod_Type` in
 `Objects/classobject.c <http://svn.python.org/view/python/trunk/Objects/classobject.c?view=markup>`_
 is a single object with two different representations depending on whether the
 :attr:`im_self` field is set or is *NULL* (the C equivalent of *None*).
diff --git a/Doc/library/al.rst b/Doc/library/al.rst
index 12cec42..ad2eaea 100644
--- a/Doc/library/al.rst
+++ b/Doc/library/al.rst
@@ -53,7 +53,7 @@
 .. function:: queryparams(device)
 
    The device argument is an integer.  The return value is a list of integers
-   containing the data returned by :cfunc:`ALqueryparams`.
+   containing the data returned by :c:func:`ALqueryparams`.
 
 
 .. function:: getparams(device, list)
diff --git a/Doc/library/array.rst b/Doc/library/array.rst
index f7fb4e3..d34cf38 100644
--- a/Doc/library/array.rst
+++ b/Doc/library/array.rst
@@ -107,7 +107,7 @@
    memory buffer in bytes can be computed as ``array.buffer_info()[1] *
    array.itemsize``.  This is occasionally useful when working with low-level (and
    inherently unsafe) I/O interfaces that require memory addresses, such as certain
-   :cfunc:`ioctl` operations.  The returned numbers are valid as long as the array
+   :c:func:`ioctl` operations.  The returned numbers are valid as long as the array
    exists and no length-changing operations are applied to it.
 
    .. note::
diff --git a/Doc/library/asynchat.rst b/Doc/library/asynchat.rst
index 6f4af41..37d001b 100644
--- a/Doc/library/asynchat.rst
+++ b/Doc/library/asynchat.rst
@@ -34,7 +34,7 @@
 
    Like :class:`asyncore.dispatcher`, :class:`async_chat` defines a set of
    events that are generated by an analysis of socket conditions after a
-   :cfunc:`select` call. Once the polling loop has been started the
+   :c:func:`select` call. Once the polling loop has been started the
    :class:`async_chat` object's methods are called by the event-processing
    framework with no action on the part of the programmer.
 
diff --git a/Doc/library/asyncore.rst b/Doc/library/asyncore.rst
index 33f22d3..c108450 100644
--- a/Doc/library/asyncore.rst
+++ b/Doc/library/asyncore.rst
@@ -25,7 +25,7 @@
 are probably what you really need.  Network servers are rarely processor
 bound, however.
 
-If your operating system supports the :cfunc:`select` system call in its I/O
+If your operating system supports the :c:func:`select` system call in its I/O
 library (and nearly all do), then you can use it to juggle multiple
 communication channels at once; doing other work while your I/O is taking
 place in the "background."  Although this strategy can seem strange and
@@ -95,8 +95,8 @@
 
    During asynchronous processing, each mapped channel's :meth:`readable` and
    :meth:`writable` methods are used to determine whether the channel's socket
-   should be added to the list of channels :cfunc:`select`\ ed or
-   :cfunc:`poll`\ ed for read and write events.
+   should be added to the list of channels :c:func:`select`\ ed or
+   :c:func:`poll`\ ed for read and write events.
 
    Thus, the set of channel events is larger than the basic socket events.  The
    full set of methods that can be overridden in your subclass follows:
@@ -238,9 +238,9 @@
 .. class:: file_dispatcher()
 
    A file_dispatcher takes a file descriptor or file object along with an
-   optional map argument and wraps it for use with the :cfunc:`poll` or
-   :cfunc:`loop` functions.  If provided a file object or anything with a
-   :cfunc:`fileno` method, that method will be called and passed to the
+   optional map argument and wraps it for use with the :c:func:`poll` or
+   :c:func:`loop` functions.  If provided a file object or anything with a
+   :c:func:`fileno` method, that method will be called and passed to the
    :class:`file_wrapper` constructor.  Availability: UNIX.
 
 .. class:: file_wrapper()
diff --git a/Doc/library/bsddb.rst b/Doc/library/bsddb.rst
index 612a4a8..cdd380a 100644
--- a/Doc/library/bsddb.rst
+++ b/Doc/library/bsddb.rst
@@ -54,7 +54,7 @@
    optional *flag* identifies the mode used to open the file.  It may be ``'r'``
    (read only), ``'w'`` (read-write) , ``'c'`` (read-write - create if necessary;
    the default) or ``'n'`` (read-write - truncate to zero length).  The other
-   arguments are rarely used and are just passed to the low-level :cfunc:`dbopen`
+   arguments are rarely used and are just passed to the low-level :c:func:`dbopen`
    function.  Consult the Berkeley DB documentation for their use and
    interpretation.
 
diff --git a/Doc/library/codecs.rst b/Doc/library/codecs.rst
index 82cf912..62bb504 100644
--- a/Doc/library/codecs.rst
+++ b/Doc/library/codecs.rst
@@ -759,9 +759,9 @@
 ---------------------
 
 Unicode strings are stored internally as sequences of codepoints (to be precise
-as :ctype:`Py_UNICODE` arrays). Depending on the way Python is compiled (either
+as :c:type:`Py_UNICODE` arrays). Depending on the way Python is compiled (either
 via ``--enable-unicode=ucs2`` or ``--enable-unicode=ucs4``, with the
-former being the default) :ctype:`Py_UNICODE` is either a 16-bit or 32-bit data
+former being the default) :c:type:`Py_UNICODE` is either a 16-bit or 32-bit data
 type. Once a Unicode object is used outside of CPU and memory, CPU endianness
 and how these arrays are stored as bytes become an issue.  Transforming a
 unicode object into a sequence of bytes is called encoding and recreating the
diff --git a/Doc/library/commands.rst b/Doc/library/commands.rst
index 916e4a5..46ff823 100644
--- a/Doc/library/commands.rst
+++ b/Doc/library/commands.rst
@@ -38,7 +38,7 @@
    ``(status, output)``.  *cmd* is actually run as ``{ cmd ; } 2>&1``, so that the
    returned output will contain output or error messages. A trailing newline is
    stripped from the output. The exit status for the command can be interpreted
-   according to the rules for the C function :cfunc:`wait`.
+   according to the rules for the C function :c:func:`wait`.
 
 
 .. function:: getoutput(cmd)
diff --git a/Doc/library/ctypes.rst b/Doc/library/ctypes.rst
index 1a3e2f5..4913b82 100644
--- a/Doc/library/ctypes.rst
+++ b/Doc/library/ctypes.rst
@@ -40,7 +40,7 @@
 loads libraries which export functions using the standard ``cdecl`` calling
 convention, while *windll* libraries call functions using the ``stdcall``
 calling convention. *oledll* also uses the ``stdcall`` calling convention, and
-assumes the functions return a Windows :ctype:`HRESULT` error code. The error
+assumes the functions return a Windows :c:type:`HRESULT` error code. The error
 code is used to automatically raise a :class:`WindowsError` exception when the
 function call fails.
 
@@ -201,9 +201,9 @@
 ``None``, integers, longs, byte strings and unicode strings are the only native
 Python objects that can directly be used as parameters in these function calls.
 ``None`` is passed as a C ``NULL`` pointer, byte strings and unicode strings are
-passed as pointer to the memory block that contains their data (:ctype:`char *`
-or :ctype:`wchar_t *`).  Python integers and Python longs are passed as the
-platforms default C :ctype:`int` type, their value is masked to fit into the C
+passed as pointer to the memory block that contains their data (:c:type:`char *`
+or :c:type:`wchar_t *`).  Python integers and Python longs are passed as the
+platforms default C :c:type:`int` type, their value is masked to fit into the C
 type.
 
 Before we move on calling functions with other parameter types, we have to learn
@@ -217,48 +217,48 @@
 
 :mod:`ctypes` defines a number of primitive C compatible data types :
 
-+----------------------+----------------------------------------+----------------------------+
-| ctypes type          | C type                                 | Python type                |
-+======================+========================================+============================+
-| :class:`c_bool`      | :ctype:`_Bool`                         | bool (1)                   |
-+----------------------+----------------------------------------+----------------------------+
-| :class:`c_char`      | :ctype:`char`                          | 1-character string         |
-+----------------------+----------------------------------------+----------------------------+
-| :class:`c_wchar`     | :ctype:`wchar_t`                       | 1-character unicode string |
-+----------------------+----------------------------------------+----------------------------+
-| :class:`c_byte`      | :ctype:`char`                          | int/long                   |
-+----------------------+----------------------------------------+----------------------------+
-| :class:`c_ubyte`     | :ctype:`unsigned char`                 | int/long                   |
-+----------------------+----------------------------------------+----------------------------+
-| :class:`c_short`     | :ctype:`short`                         | int/long                   |
-+----------------------+----------------------------------------+----------------------------+
-| :class:`c_ushort`    | :ctype:`unsigned short`                | int/long                   |
-+----------------------+----------------------------------------+----------------------------+
-| :class:`c_int`       | :ctype:`int`                           | int/long                   |
-+----------------------+----------------------------------------+----------------------------+
-| :class:`c_uint`      | :ctype:`unsigned int`                  | int/long                   |
-+----------------------+----------------------------------------+----------------------------+
-| :class:`c_long`      | :ctype:`long`                          | int/long                   |
-+----------------------+----------------------------------------+----------------------------+
-| :class:`c_ulong`     | :ctype:`unsigned long`                 | int/long                   |
-+----------------------+----------------------------------------+----------------------------+
-| :class:`c_longlong`  | :ctype:`__int64` or :ctype:`long long` | int/long                   |
-+----------------------+----------------------------------------+----------------------------+
-| :class:`c_ulonglong` | :ctype:`unsigned __int64` or           | int/long                   |
-|                      | :ctype:`unsigned long long`            |                            |
-+----------------------+----------------------------------------+----------------------------+
-| :class:`c_float`     | :ctype:`float`                         | float                      |
-+----------------------+----------------------------------------+----------------------------+
-| :class:`c_double`    | :ctype:`double`                        | float                      |
-+----------------------+----------------------------------------+----------------------------+
-| :class:`c_longdouble`| :ctype:`long double`                   | float                      |
-+----------------------+----------------------------------------+----------------------------+
-| :class:`c_char_p`    | :ctype:`char *` (NUL terminated)       | string or ``None``         |
-+----------------------+----------------------------------------+----------------------------+
-| :class:`c_wchar_p`   | :ctype:`wchar_t *` (NUL terminated)    | unicode or ``None``        |
-+----------------------+----------------------------------------+----------------------------+
-| :class:`c_void_p`    | :ctype:`void *`                        | int/long or ``None``       |
-+----------------------+----------------------------------------+----------------------------+
++----------------------+------------------------------------------+----------------------------+
+| ctypes type          | C type                                   | Python type                |
++======================+==========================================+============================+
+| :class:`c_bool`      | :c:type:`_Bool`                          | bool (1)                   |
++----------------------+------------------------------------------+----------------------------+
+| :class:`c_char`      | :c:type:`char`                           | 1-character string         |
++----------------------+------------------------------------------+----------------------------+
+| :class:`c_wchar`     | :c:type:`wchar_t`                        | 1-character unicode string |
++----------------------+------------------------------------------+----------------------------+
+| :class:`c_byte`      | :c:type:`char`                           | int/long                   |
++----------------------+------------------------------------------+----------------------------+
+| :class:`c_ubyte`     | :c:type:`unsigned char`                  | int/long                   |
++----------------------+------------------------------------------+----------------------------+
+| :class:`c_short`     | :c:type:`short`                          | int/long                   |
++----------------------+------------------------------------------+----------------------------+
+| :class:`c_ushort`    | :c:type:`unsigned short`                 | int/long                   |
++----------------------+------------------------------------------+----------------------------+
+| :class:`c_int`       | :c:type:`int`                            | int/long                   |
++----------------------+------------------------------------------+----------------------------+
+| :class:`c_uint`      | :c:type:`unsigned int`                   | int/long                   |
++----------------------+------------------------------------------+----------------------------+
+| :class:`c_long`      | :c:type:`long`                           | int/long                   |
++----------------------+------------------------------------------+----------------------------+
+| :class:`c_ulong`     | :c:type:`unsigned long`                  | int/long                   |
++----------------------+------------------------------------------+----------------------------+
+| :class:`c_longlong`  | :c:type:`__int64` or :c:type:`long long` | int/long                   |
++----------------------+------------------------------------------+----------------------------+
+| :class:`c_ulonglong` | :c:type:`unsigned __int64` or            | int/long                   |
+|                      | :c:type:`unsigned long long`             |                            |
++----------------------+------------------------------------------+----------------------------+
+| :class:`c_float`     | :c:type:`float`                          | float                      |
++----------------------+------------------------------------------+----------------------------+
+| :class:`c_double`    | :c:type:`double`                         | float                      |
++----------------------+------------------------------------------+----------------------------+
+| :class:`c_longdouble`| :c:type:`long double`                    | float                      |
++----------------------+------------------------------------------+----------------------------+
+| :class:`c_char_p`    | :c:type:`char *` (NUL terminated)        | string or ``None``         |
++----------------------+------------------------------------------+----------------------------+
+| :class:`c_wchar_p`   | :c:type:`wchar_t *` (NUL terminated)     | unicode or ``None``        |
++----------------------+------------------------------------------+----------------------------+
+| :class:`c_void_p`    | :c:type:`void *`                         | int/long or ``None``       |
++----------------------+------------------------------------------+----------------------------+
 
 (1)
    The constructor accepts any object with a truth value.
@@ -329,7 +329,7 @@
 The :func:`create_string_buffer` function replaces the :func:`c_buffer` function
 (which is still available as an alias), as well as the :func:`c_string` function
 from earlier ctypes releases.  To create a mutable memory block containing
-unicode characters of the C type :ctype:`wchar_t` use the
+unicode characters of the C type :c:type:`wchar_t` use the
 :func:`create_unicode_buffer` function.
 
 
@@ -440,7 +440,7 @@
 Return types
 ^^^^^^^^^^^^
 
-By default functions are assumed to return the C :ctype:`int` type.  Other
+By default functions are assumed to return the C :c:type:`int` type.  Other
 return types can be specified by setting the :attr:`restype` attribute of the
 function object.
 
@@ -1338,7 +1338,7 @@
 
    Instances of this class represent loaded shared libraries. Functions in these
    libraries use the standard C calling convention, and are assumed to return
-   :ctype:`int`.
+   :c:type:`int`.
 
 
 .. class:: OleDLL(name, mode=DEFAULT_MODE, handle=None, use_errno=False, use_last_error=False)
@@ -1355,7 +1355,7 @@
 
    Windows only: Instances of this class represent loaded shared libraries,
    functions in these libraries use the ``stdcall`` calling convention, and are
-   assumed to return :ctype:`int` by default.
+   assumed to return :c:type:`int` by default.
 
    On Windows CE only the standard calling convention is used, for convenience the
    :class:`WinDLL` and :class:`OleDLL` use the standard calling convention on this
@@ -1500,7 +1500,7 @@
 
    An instance of :class:`PyDLL` that exposes Python C API functions as
    attributes.  Note that all these functions are assumed to return C
-   :ctype:`int`, which is of course not always the truth, so you have to assign
+   :c:type:`int`, which is of course not always the truth, so you have to assign
    the correct :attr:`restype` attribute to use these functions.
 
 
@@ -1530,10 +1530,10 @@
    .. attribute:: restype
 
       Assign a ctypes type to specify the result type of the foreign function.
-      Use ``None`` for :ctype:`void`, a function not returning anything.
+      Use ``None`` for :c:type:`void`, a function not returning anything.
 
       It is possible to assign a callable Python object that is not a ctypes
-      type, in this case the function is assumed to return a C :ctype:`int`, and
+      type, in this case the function is assumed to return a C :c:type:`int`, and
       the callable will be called with this integer, allowing to do further
       processing or error checking.  Using this is deprecated, for more flexible
       post processing or error checking use a ctypes data type as
@@ -2159,21 +2159,21 @@
 
 .. class:: c_byte
 
-   Represents the C :ctype:`signed char` datatype, and interprets the value as
+   Represents the C :c:type:`signed char` datatype, and interprets the value as
    small integer.  The constructor accepts an optional integer initializer; no
    overflow checking is done.
 
 
 .. class:: c_char
 
-   Represents the C :ctype:`char` datatype, and interprets the value as a single
+   Represents the C :c:type:`char` datatype, and interprets the value as a single
    character.  The constructor accepts an optional string initializer, the
    length of the string must be exactly one character.
 
 
 .. class:: c_char_p
 
-   Represents the C :ctype:`char *` datatype when it points to a zero-terminated
+   Represents the C :c:type:`char *` datatype when it points to a zero-terminated
    string.  For a general character pointer that may also point to binary data,
    ``POINTER(c_char)`` must be used.  The constructor accepts an integer
    address, or a string.
@@ -2181,13 +2181,13 @@
 
 .. class:: c_double
 
-   Represents the C :ctype:`double` datatype.  The constructor accepts an
+   Represents the C :c:type:`double` datatype.  The constructor accepts an
    optional float initializer.
 
 
 .. class:: c_longdouble
 
-   Represents the C :ctype:`long double` datatype.  The constructor accepts an
+   Represents the C :c:type:`long double` datatype.  The constructor accepts an
    optional float initializer.  On platforms where ``sizeof(long double) ==
    sizeof(double)`` it is an alias to :class:`c_double`.
 
@@ -2195,150 +2195,150 @@
 
 .. class:: c_float
 
-   Represents the C :ctype:`float` datatype.  The constructor accepts an
+   Represents the C :c:type:`float` datatype.  The constructor accepts an
    optional float initializer.
 
 
 .. class:: c_int
 
-   Represents the C :ctype:`signed int` datatype.  The constructor accepts an
+   Represents the C :c:type:`signed int` datatype.  The constructor accepts an
    optional integer initializer; no overflow checking is done.  On platforms
    where ``sizeof(int) == sizeof(long)`` it is an alias to :class:`c_long`.
 
 
 .. class:: c_int8
 
-   Represents the C 8-bit :ctype:`signed int` datatype.  Usually an alias for
+   Represents the C 8-bit :c:type:`signed int` datatype.  Usually an alias for
    :class:`c_byte`.
 
 
 .. class:: c_int16
 
-   Represents the C 16-bit :ctype:`signed int` datatype.  Usually an alias for
+   Represents the C 16-bit :c:type:`signed int` datatype.  Usually an alias for
    :class:`c_short`.
 
 
 .. class:: c_int32
 
-   Represents the C 32-bit :ctype:`signed int` datatype.  Usually an alias for
+   Represents the C 32-bit :c:type:`signed int` datatype.  Usually an alias for
    :class:`c_int`.
 
 
 .. class:: c_int64
 
-   Represents the C 64-bit :ctype:`signed int` datatype.  Usually an alias for
+   Represents the C 64-bit :c:type:`signed int` datatype.  Usually an alias for
    :class:`c_longlong`.
 
 
 .. class:: c_long
 
-   Represents the C :ctype:`signed long` datatype.  The constructor accepts an
+   Represents the C :c:type:`signed long` datatype.  The constructor accepts an
    optional integer initializer; no overflow checking is done.
 
 
 .. class:: c_longlong
 
-   Represents the C :ctype:`signed long long` datatype.  The constructor accepts
+   Represents the C :c:type:`signed long long` datatype.  The constructor accepts
    an optional integer initializer; no overflow checking is done.
 
 
 .. class:: c_short
 
-   Represents the C :ctype:`signed short` datatype.  The constructor accepts an
+   Represents the C :c:type:`signed short` datatype.  The constructor accepts an
    optional integer initializer; no overflow checking is done.
 
 
 .. class:: c_size_t
 
-   Represents the C :ctype:`size_t` datatype.
+   Represents the C :c:type:`size_t` datatype.
 
 
 .. class:: c_ssize_t
 
-   Represents the C :ctype:`ssize_t` datatype.
+   Represents the C :c:type:`ssize_t` datatype.
 
    .. versionadded:: 2.7
 
 
 .. class:: c_ubyte
 
-   Represents the C :ctype:`unsigned char` datatype, it interprets the value as
+   Represents the C :c:type:`unsigned char` datatype, it interprets the value as
    small integer.  The constructor accepts an optional integer initializer; no
    overflow checking is done.
 
 
 .. class:: c_uint
 
-   Represents the C :ctype:`unsigned int` datatype.  The constructor accepts an
+   Represents the C :c:type:`unsigned int` datatype.  The constructor accepts an
    optional integer initializer; no overflow checking is done.  On platforms
    where ``sizeof(int) == sizeof(long)`` it is an alias for :class:`c_ulong`.
 
 
 .. class:: c_uint8
 
-   Represents the C 8-bit :ctype:`unsigned int` datatype.  Usually an alias for
+   Represents the C 8-bit :c:type:`unsigned int` datatype.  Usually an alias for
    :class:`c_ubyte`.
 
 
 .. class:: c_uint16
 
-   Represents the C 16-bit :ctype:`unsigned int` datatype.  Usually an alias for
+   Represents the C 16-bit :c:type:`unsigned int` datatype.  Usually an alias for
    :class:`c_ushort`.
 
 
 .. class:: c_uint32
 
-   Represents the C 32-bit :ctype:`unsigned int` datatype.  Usually an alias for
+   Represents the C 32-bit :c:type:`unsigned int` datatype.  Usually an alias for
    :class:`c_uint`.
 
 
 .. class:: c_uint64
 
-   Represents the C 64-bit :ctype:`unsigned int` datatype.  Usually an alias for
+   Represents the C 64-bit :c:type:`unsigned int` datatype.  Usually an alias for
    :class:`c_ulonglong`.
 
 
 .. class:: c_ulong
 
-   Represents the C :ctype:`unsigned long` datatype.  The constructor accepts an
+   Represents the C :c:type:`unsigned long` datatype.  The constructor accepts an
    optional integer initializer; no overflow checking is done.
 
 
 .. class:: c_ulonglong
 
-   Represents the C :ctype:`unsigned long long` datatype.  The constructor
+   Represents the C :c:type:`unsigned long long` datatype.  The constructor
    accepts an optional integer initializer; no overflow checking is done.
 
 
 .. class:: c_ushort
 
-   Represents the C :ctype:`unsigned short` datatype.  The constructor accepts
+   Represents the C :c:type:`unsigned short` datatype.  The constructor accepts
    an optional integer initializer; no overflow checking is done.
 
 
 .. class:: c_void_p
 
-   Represents the C :ctype:`void *` type.  The value is represented as integer.
+   Represents the C :c:type:`void *` type.  The value is represented as integer.
    The constructor accepts an optional integer initializer.
 
 
 .. class:: c_wchar
 
-   Represents the C :ctype:`wchar_t` datatype, and interprets the value as a
+   Represents the C :c:type:`wchar_t` datatype, and interprets the value as a
    single character unicode string.  The constructor accepts an optional string
    initializer, the length of the string must be exactly one character.
 
 
 .. class:: c_wchar_p
 
-   Represents the C :ctype:`wchar_t *` datatype, which must be a pointer to a
+   Represents the C :c:type:`wchar_t *` datatype, which must be a pointer to a
    zero-terminated wide character string.  The constructor accepts an integer
    address, or a string.
 
 
 .. class:: c_bool
 
-   Represent the C :ctype:`bool` datatype (more accurately, :ctype:`_Bool` from
+   Represent the C :c:type:`bool` datatype (more accurately, :c:type:`_Bool` from
    C99).  Its value can be True or False, and the constructor accepts any object
    that has a truth value.
 
@@ -2347,18 +2347,18 @@
 
 .. class:: HRESULT
 
-   Windows only: Represents a :ctype:`HRESULT` value, which contains success or
+   Windows only: Represents a :c:type:`HRESULT` value, which contains success or
    error information for a function or method call.
 
 
 .. class:: py_object
 
-   Represents the C :ctype:`PyObject *` datatype.  Calling this without an
-   argument creates a ``NULL`` :ctype:`PyObject *` pointer.
+   Represents the C :c:type:`PyObject *` datatype.  Calling this without an
+   argument creates a ``NULL`` :c:type:`PyObject *` pointer.
 
 The :mod:`ctypes.wintypes` module provides quite some other Windows specific
-data types, for example :ctype:`HWND`, :ctype:`WPARAM`, or :ctype:`DWORD`.  Some
-useful structures like :ctype:`MSG` or :ctype:`RECT` are also defined.
+data types, for example :c:type:`HWND`, :c:type:`WPARAM`, or :c:type:`DWORD`.  Some
+useful structures like :c:type:`MSG` or :c:type:`RECT` are also defined.
 
 
 .. _ctypes-structured-data-types:
diff --git a/Doc/library/datetime.rst b/Doc/library/datetime.rst
index 55acf67..c94064d 100644
--- a/Doc/library/datetime.rst
+++ b/Doc/library/datetime.rst
@@ -360,7 +360,7 @@
 
    Return the local date corresponding to the POSIX timestamp, such as is returned
    by :func:`time.time`.  This may raise :exc:`ValueError`, if the timestamp is out
-   of the range of values supported by the platform C :cfunc:`localtime` function.
+   of the range of values supported by the platform C :c:func:`localtime` function.
    It's common for this to be restricted to years from 1970 through 2038.  Note
    that on non-POSIX systems that include leap seconds in their notion of a
    timestamp, leap seconds are ignored by :meth:`fromtimestamp`.
@@ -534,7 +534,7 @@
    Return a string representing the date, for example ``date(2002, 12,
    4).ctime() == 'Wed Dec 4 00:00:00 2002'``. ``d.ctime()`` is equivalent to
    ``time.ctime(time.mktime(d.timetuple()))`` on platforms where the native C
-   :cfunc:`ctime` function (which :func:`time.ctime` invokes, but which
+   :c:func:`ctime` function (which :func:`time.ctime` invokes, but which
    :meth:`date.ctime` does not invoke) conforms to the C standard.
 
 
@@ -641,7 +641,7 @@
    or not specified, this is like :meth:`today`, but, if possible, supplies more
    precision than can be gotten from going through a :func:`time.time` timestamp
    (for example, this may be possible on platforms supplying the C
-   :cfunc:`gettimeofday` function).
+   :c:func:`gettimeofday` function).
 
    Else *tz* must be an instance of a class :class:`tzinfo` subclass, and the
    current date and time are converted to *tz*'s time zone.  In this case the
@@ -669,8 +669,8 @@
    ``tz.fromutc(datetime.utcfromtimestamp(timestamp).replace(tzinfo=tz))``.
 
    :meth:`fromtimestamp` may raise :exc:`ValueError`, if the timestamp is out of
-   the range of values supported by the platform C :cfunc:`localtime` or
-   :cfunc:`gmtime` functions.  It's common for this to be restricted to years in
+   the range of values supported by the platform C :c:func:`localtime` or
+   :c:func:`gmtime` functions.  It's common for this to be restricted to years in
    1970 through 2038. Note that on non-POSIX systems that include leap seconds in
    their notion of a timestamp, leap seconds are ignored by :meth:`fromtimestamp`,
    and then it's possible to have two timestamps differing by a second that yield
@@ -681,7 +681,7 @@
 
    Return the UTC :class:`datetime` corresponding to the POSIX timestamp, with
    :attr:`tzinfo` ``None``. This may raise :exc:`ValueError`, if the timestamp is
-   out of the range of values supported by the platform C :cfunc:`gmtime` function.
+   out of the range of values supported by the platform C :c:func:`gmtime` function.
    It's common for this to be restricted to years in 1970 through 2038. See also
    :meth:`fromtimestamp`.
 
@@ -1024,7 +1024,7 @@
    Return a string representing the date and time, for example ``datetime(2002, 12,
    4, 20, 30, 40).ctime() == 'Wed Dec  4 20:30:40 2002'``. ``d.ctime()`` is
    equivalent to ``time.ctime(time.mktime(d.timetuple()))`` on platforms where the
-   native C :cfunc:`ctime` function (which :func:`time.ctime` invokes, but which
+   native C :c:func:`ctime` function (which :func:`time.ctime` invokes, but which
    :meth:`datetime.ctime` does not invoke) conforms to the C standard.
 
 
diff --git a/Doc/library/dl.rst b/Doc/library/dl.rst
index a383729..13510c5 100644
--- a/Doc/library/dl.rst
+++ b/Doc/library/dl.rst
@@ -13,7 +13,7 @@
 
 .. sectionauthor:: Moshe Zadka <moshez@zadka.site.co.il>
 
-The :mod:`dl` module defines an interface to the :cfunc:`dlopen` function, which
+The :mod:`dl` module defines an interface to the :c:func:`dlopen` function, which
 is the most common interface on Unix platforms for handling dynamically linked
 libraries. It allows the program to call arbitrary functions in such a library.
 
@@ -105,10 +105,10 @@
    Call the function named *name* in the referenced shared object. The arguments
    must be either Python integers, which will be  passed as is, Python strings, to
    which a pointer will be passed,  or ``None``, which will be passed as *NULL*.
-   Note that  strings should only be passed to functions as :ctype:`const char\*`,
+   Note that  strings should only be passed to functions as :c:type:`const char\*`,
    as Python will not like its string mutated.
 
    There must be at most 10 arguments, and arguments not given will be treated as
-   ``None``. The function's return value must be a C :ctype:`long`, which is a
+   ``None``. The function's return value must be a C :c:type:`long`, which is a
    Python integer.
 
diff --git a/Doc/library/exceptions.rst b/Doc/library/exceptions.rst
index 8bd903a..6c80df7 100644
--- a/Doc/library/exceptions.rst
+++ b/Doc/library/exceptions.rst
@@ -220,7 +220,7 @@
    Raised when an operation runs out of memory but the situation may still be
    rescued (by deleting some objects).  The associated value is a string indicating
    what kind of (internal) operation ran out of memory. Note that because of the
-   underlying memory management architecture (C's :cfunc:`malloc` function), the
+   underlying memory management architecture (C's :c:func:`malloc` function), the
    interpreter may not always be able to completely recover from this situation; it
    nevertheless raises an exception so that a stack traceback can be printed, in
    case a run-away program was the cause.
@@ -249,8 +249,8 @@
    This exception is derived from :exc:`EnvironmentError`.  It is raised when a
    function returns a system-related error (not for illegal argument types or
    other incidental errors).  The :attr:`errno` attribute is a numeric error
-   code from :cdata:`errno`, and the :attr:`strerror` attribute is the
-   corresponding string, as would be printed by the C function :cfunc:`perror`.
+   code from :c:data:`errno`, and the :attr:`strerror` attribute is the
+   corresponding string, as would be printed by the C function :c:func:`perror`.
    See the module :mod:`errno`, which contains names for the error codes defined
    by the underlying operating system.
 
@@ -342,7 +342,7 @@
    This exception is raised by the :func:`sys.exit` function.  When it is not
    handled, the Python interpreter exits; no stack traceback is printed.  If the
    associated value is a plain integer, it specifies the system exit status (passed
-   to C's :cfunc:`exit` function); if it is ``None``, the exit status is zero; if
+   to C's :c:func:`exit` function); if it is ``None``, the exit status is zero; if
    it has another type (such as a string), the object's value is printed and the
    exit status is one.
 
@@ -429,16 +429,16 @@
 .. exception:: WindowsError
 
    Raised when a Windows-specific error occurs or when the error number does not
-   correspond to an :cdata:`errno` value.  The :attr:`winerror` and
+   correspond to an :c:data:`errno` value.  The :attr:`winerror` and
    :attr:`strerror` values are created from the return values of the
-   :cfunc:`GetLastError` and :cfunc:`FormatMessage` functions from the Windows
+   :c:func:`GetLastError` and :c:func:`FormatMessage` functions from the Windows
    Platform API. The :attr:`errno` value maps the :attr:`winerror` value to
    corresponding ``errno.h`` values. This is a subclass of :exc:`OSError`.
 
    .. versionadded:: 2.0
 
    .. versionchanged:: 2.5
-      Previous versions put the :cfunc:`GetLastError` codes into :attr:`errno`.
+      Previous versions put the :c:func:`GetLastError` codes into :attr:`errno`.
 
 
 .. exception:: ZeroDivisionError
diff --git a/Doc/library/fcntl.rst b/Doc/library/fcntl.rst
index d0430c2..40ae08b 100644
--- a/Doc/library/fcntl.rst
+++ b/Doc/library/fcntl.rst
@@ -13,7 +13,7 @@
    pair: UNIX; I/O control
 
 This module performs file control and I/O control on file descriptors. It is an
-interface to the :cfunc:`fcntl` and :cfunc:`ioctl` Unix routines.
+interface to the :c:func:`fcntl` and :c:func:`ioctl` Unix routines.
 
 All functions in this module take a file descriptor *fd* as their first
 argument.  This can be an integer file descriptor, such as returned by
@@ -31,17 +31,17 @@
    :mod:`fcntl` module. The argument *arg* is optional, and defaults to the integer
    value ``0``.  When present, it can either be an integer value, or a string.
    With the argument missing or an integer value, the return value of this function
-   is the integer return value of the C :cfunc:`fcntl` call.  When the argument is
+   is the integer return value of the C :c:func:`fcntl` call.  When the argument is
    a string it represents a binary structure, e.g. created by :func:`struct.pack`.
    The binary data is copied to a buffer whose address is passed to the C
-   :cfunc:`fcntl` call.  The return value after a successful call is the contents
+   :c:func:`fcntl` call.  The return value after a successful call is the contents
    of the buffer, converted to a string object.  The length of the returned string
    will be the same as the length of the *arg* argument.  This is limited to 1024
    bytes.  If the information returned in the buffer by the operating system is
    larger than 1024 bytes, this is most likely to result in a segmentation
    violation or a more subtle data corruption.
 
-   If the :cfunc:`fcntl` fails, an :exc:`IOError` is raised.
+   If the :c:func:`fcntl` fails, an :exc:`IOError` is raised.
 
 
 .. function:: ioctl(fd, op[, arg[, mutate_flag]])
@@ -97,7 +97,7 @@
    Perform the lock operation *op* on file descriptor *fd* (file objects providing
    a :meth:`fileno` method are accepted as well). See the Unix manual
    :manpage:`flock(2)` for details.  (On some systems, this function is emulated
-   using :cfunc:`fcntl`.)
+   using :c:func:`fcntl`.)
 
 
 .. function:: lockf(fd, operation, [length, [start, [whence]]])
diff --git a/Doc/library/fl.rst b/Doc/library/fl.rst
index a5a426a..540cac9 100644
--- a/Doc/library/fl.rst
+++ b/Doc/library/fl.rst
@@ -29,8 +29,8 @@
 the 'current form' maintained by the library to which new FORMS objects are
 added, all functions that add a FORMS object to a form are methods of the Python
 object representing the form. Consequently, there are no Python equivalents for
-the C functions :cfunc:`fl_addto_form` and :cfunc:`fl_end_form`, and the
-equivalent of :cfunc:`fl_bgn_form` is called :func:`fl.make_form`.
+the C functions :c:func:`fl_addto_form` and :c:func:`fl_end_form`, and the
+equivalent of :c:func:`fl_bgn_form` is called :func:`fl.make_form`.
 
 Watch out for the somewhat confusing terminology: FORMS uses the word
 :dfn:`object` for the buttons, sliders etc. that you can place in a form. In
@@ -44,7 +44,7 @@
 event handling is available, though, so you can mix FORMS with pure GL windows.
 
 **Please note:** importing :mod:`fl` implies a call to the GL function
-:cfunc:`foreground` and to the FORMS routine :cfunc:`fl_init`.
+:c:func:`foreground` and to the FORMS routine :c:func:`fl_init`.
 
 
 .. _fl-functions:
@@ -88,7 +88,7 @@
 .. function:: get_rgbmode()
 
    Return the current rgb mode.  This is the value of the C global variable
-   :cdata:`fl_rgbmode`.
+   :c:data:`fl_rgbmode`.
 
 
 .. function:: show_message(str1, str2, str3)
@@ -153,8 +153,8 @@
               mapcolor()
               getmcolor()
 
-   See the description in the FORMS documentation of :cfunc:`fl_color`,
-   :cfunc:`fl_mapcolor` and :cfunc:`fl_getmcolor`.
+   See the description in the FORMS documentation of :c:func:`fl_color`,
+   :c:func:`fl_mapcolor` and :c:func:`fl_getmcolor`.
 
 
 .. _form-objects:
diff --git a/Doc/library/fm.rst b/Doc/library/fm.rst
index e46506b..6bf6808 100644
--- a/Doc/library/fm.rst
+++ b/Doc/library/fm.rst
@@ -30,7 +30,7 @@
 
 .. function:: init()
 
-   Initialization function. Calls :cfunc:`fminit`. It is normally not necessary to
+   Initialization function. Calls :c:func:`fminit`. It is normally not necessary to
    call this function, since it is called automatically the first time the
    :mod:`fm` module is imported.
 
@@ -43,7 +43,7 @@
 .. function:: enumerate()
 
    Returns a list of available font names. This is an interface to
-   :cfunc:`fmenumerate`.
+   :c:func:`fmenumerate`.
 
 
 .. function:: prstr(string)
diff --git a/Doc/library/functions.rst b/Doc/library/functions.rst
index 739350b..6f3473e 100644
--- a/Doc/library/functions.rst
+++ b/Doc/library/functions.rst
@@ -808,7 +808,7 @@
    :exc:`IOError` is raised.  When opening a file, it's preferable to use
    :func:`open` instead of invoking the :class:`file` constructor directly.
 
-   The first two arguments are the same as for ``stdio``'s :cfunc:`fopen`:
+   The first two arguments are the same as for ``stdio``'s :c:func:`fopen`:
    *name* is the file name to be opened, and *mode* is a string indicating how
    the file is to be opened.
 
@@ -841,7 +841,7 @@
    binary mode, on systems that differentiate between binary and text files; on
    systems that don't have this distinction, adding the ``'b'`` has no effect.
 
-   In addition to the standard :cfunc:`fopen` values *mode* may be ``'U'`` or
+   In addition to the standard :c:func:`fopen` values *mode* may be ``'U'`` or
    ``'rU'``.  Python is usually built with universal newline support; supplying
    ``'U'`` opens the file as a text file, but lines may be terminated by any of the
    following: the Unix end-of-line convention ``'\n'``,  the Macintosh convention
@@ -1662,8 +1662,8 @@
 .. [#] It is used relatively rarely so does not warrant being made into a statement.
 
 .. [#] Specifying a buffer size currently has no effect on systems that don't have
-   :cfunc:`setvbuf`.  The interface to specify the buffer size is not done using a
-   method that calls :cfunc:`setvbuf`, because that may dump core when called after
+   :c:func:`setvbuf`.  The interface to specify the buffer size is not done using a
+   method that calls :c:func:`setvbuf`, because that may dump core when called after
    any I/O has been performed, and there's no reliable way to determine whether
    this is the case.
 
diff --git a/Doc/library/getopt.rst b/Doc/library/getopt.rst
index 11385ff..b3ba614 100644
--- a/Doc/library/getopt.rst
+++ b/Doc/library/getopt.rst
@@ -11,13 +11,13 @@
 
 .. note::
    The :mod:`getopt` module is a parser for command line options whose API is
-   designed to be familiar to users of the C :cfunc:`getopt` function. Users who
-   are unfamiliar with the C :cfunc:`getopt` function or who would like to write
+   designed to be familiar to users of the C :c:func:`getopt` function. Users who
+   are unfamiliar with the C :c:func:`getopt` function or who would like to write
    less code and get better help and error messages should consider using the
    :mod:`argparse` module instead.
 
 This module helps scripts to parse the command line arguments in ``sys.argv``.
-It supports the same conventions as the Unix :cfunc:`getopt` function (including
+It supports the same conventions as the Unix :c:func:`getopt` function (including
 the special meanings of arguments of the form '``-``' and '``--``').  Long
 options similar to those supported by GNU software may be used as well via an
 optional third argument.
@@ -32,11 +32,11 @@
    be parsed, without the leading reference to the running program. Typically, this
    means ``sys.argv[1:]``. *options* is the string of option letters that the
    script wants to recognize, with options that require an argument followed by a
-   colon (``':'``; i.e., the same format that Unix :cfunc:`getopt` uses).
+   colon (``':'``; i.e., the same format that Unix :c:func:`getopt` uses).
 
    .. note::
 
-      Unlike GNU :cfunc:`getopt`, after a non-option argument, all further
+      Unlike GNU :c:func:`getopt`, after a non-option argument, all further
       arguments are considered also non-options. This is similar to the way
       non-GNU Unix systems work.
 
diff --git a/Doc/library/inspect.rst b/Doc/library/inspect.rst
index e05618e..2b41bec 100644
--- a/Doc/library/inspect.rst
+++ b/Doc/library/inspect.rst
@@ -366,7 +366,7 @@
    .. impl-detail::
 
       getsets are attributes defined in extension modules via
-      :ctype:`PyGetSetDef` structures.  For Python implementations without such
+      :c:type:`PyGetSetDef` structures.  For Python implementations without such
       types, this method will always return ``False``.
 
    .. versionadded:: 2.5
@@ -379,7 +379,7 @@
    .. impl-detail::
 
       Member descriptors are attributes defined in extension modules via
-      :ctype:`PyMemberDef` structures.  For Python implementations without such
+      :c:type:`PyMemberDef` structures.  For Python implementations without such
       types, this method will always return ``False``.
 
    .. versionadded:: 2.5
diff --git a/Doc/library/locale.rst b/Doc/library/locale.rst
index 9cc3ab5..36fbde8 100644
--- a/Doc/library/locale.rst
+++ b/Doc/library/locale.rst
@@ -219,7 +219,7 @@
 
       .. note::
 
-         The expression is in the syntax suitable for the :cfunc:`regex` function
+         The expression is in the syntax suitable for the :c:func:`regex` function
          from the C library, which might differ from the syntax used in :mod:`re`.
 
    .. data:: NOEXPR
@@ -560,7 +560,7 @@
 Python applications should normally find no need to invoke these functions, and
 should use :mod:`gettext` instead.  A known exception to this rule are
 applications that link with additional C libraries which internally invoke
-:cfunc:`gettext` or :func:`dcgettext`.  For these applications, it may be
+:c:func:`gettext` or :func:`dcgettext`.  For these applications, it may be
 necessary to bind the text domain, so that the libraries can properly locate
 their message catalogs.
 
diff --git a/Doc/library/macos.rst b/Doc/library/macos.rst
index 75cbb19..119c2da 100644
--- a/Doc/library/macos.rst
+++ b/Doc/library/macos.rst
@@ -41,7 +41,7 @@
 
    This exception is raised on MacOS generated errors, either from functions in
    this module or from other mac-specific modules like the toolbox interfaces. The
-   arguments are the integer error code (the :cdata:`OSErr` value) and a textual
+   arguments are the integer error code (the :c:data:`OSErr` value) and a textual
    description of the error code. Symbolic names for all known error codes are
    defined in the standard module :mod:`macerrors`.
 
diff --git a/Doc/library/mailbox.rst b/Doc/library/mailbox.rst
index d51f340..7e6f44a 100644
--- a/Doc/library/mailbox.rst
+++ b/Doc/library/mailbox.rst
@@ -459,7 +459,7 @@
                unlock()
 
       Three locking mechanisms are used---dot locking and, if available, the
-      :cfunc:`flock` and :cfunc:`lockf` system calls.
+      :c:func:`flock` and :c:func:`lockf` system calls.
 
 
 .. seealso::
@@ -573,7 +573,7 @@
                unlock()
 
       Three locking mechanisms are used---dot locking and, if available, the
-      :cfunc:`flock` and :cfunc:`lockf` system calls. For MH mailboxes, locking
+      :c:func:`flock` and :c:func:`lockf` system calls. For MH mailboxes, locking
       the mailbox means locking the :file:`.mh_sequences` file and, only for the
       duration of any operations that affect them, locking individual message
       files.
@@ -671,7 +671,7 @@
                unlock()
 
       Three locking mechanisms are used---dot locking and, if available, the
-      :cfunc:`flock` and :cfunc:`lockf` system calls.
+      :c:func:`flock` and :c:func:`lockf` system calls.
 
 
 .. seealso::
@@ -722,7 +722,7 @@
                unlock()
 
       Three locking mechanisms are used---dot locking and, if available, the
-      :cfunc:`flock` and :cfunc:`lockf` system calls.
+      :c:func:`flock` and :c:func:`lockf` system calls.
 
 
 .. seealso::
diff --git a/Doc/library/msilib.rst b/Doc/library/msilib.rst
index a412609..59e9cf9 100644
--- a/Doc/library/msilib.rst
+++ b/Doc/library/msilib.rst
@@ -44,7 +44,7 @@
 .. function:: UuidCreate()
 
    Return the string representation of a new unique identifier. This wraps the
-   Windows API functions :cfunc:`UuidCreate` and :cfunc:`UuidToString`.
+   Windows API functions :c:func:`UuidCreate` and :c:func:`UuidToString`.
 
 
 .. function:: OpenDatabase(path, persist)
@@ -60,7 +60,7 @@
 
 .. function:: CreateRecord(count)
 
-   Return a new record object by calling :cfunc:`MSICreateRecord`. *count* is the
+   Return a new record object by calling :c:func:`MSICreateRecord`. *count* is the
    number of fields of the record.
 
 
@@ -135,20 +135,20 @@
 
 .. method:: Database.OpenView(sql)
 
-   Return a view object, by calling :cfunc:`MSIDatabaseOpenView`. *sql* is the SQL
+   Return a view object, by calling :c:func:`MSIDatabaseOpenView`. *sql* is the SQL
    statement to execute.
 
 
 .. method:: Database.Commit()
 
    Commit the changes pending in the current transaction, by calling
-   :cfunc:`MSIDatabaseCommit`.
+   :c:func:`MSIDatabaseCommit`.
 
 
 .. method:: Database.GetSummaryInformation(count)
 
    Return a new summary information object, by calling
-   :cfunc:`MsiGetSummaryInformation`.  *count* is the maximum number of updated
+   :c:func:`MsiGetSummaryInformation`.  *count* is the maximum number of updated
    values.
 
 
@@ -166,7 +166,7 @@
 
 .. method:: View.Execute(params)
 
-   Execute the SQL query of the view, through :cfunc:`MSIViewExecute`. If
+   Execute the SQL query of the view, through :c:func:`MSIViewExecute`. If
    *params* is not ``None``, it is a record describing actual values of the
    parameter tokens in the query.
 
@@ -174,18 +174,18 @@
 .. method:: View.GetColumnInfo(kind)
 
    Return a record describing the columns of the view, through calling
-   :cfunc:`MsiViewGetColumnInfo`. *kind* can be either ``MSICOLINFO_NAMES`` or
+   :c:func:`MsiViewGetColumnInfo`. *kind* can be either ``MSICOLINFO_NAMES`` or
    ``MSICOLINFO_TYPES``.
 
 
 .. method:: View.Fetch()
 
-   Return a result record of the query, through calling :cfunc:`MsiViewFetch`.
+   Return a result record of the query, through calling :c:func:`MsiViewFetch`.
 
 
 .. method:: View.Modify(kind, data)
 
-   Modify the view, by calling :cfunc:`MsiViewModify`. *kind* can be one of
+   Modify the view, by calling :c:func:`MsiViewModify`. *kind* can be one of
    ``MSIMODIFY_SEEK``, ``MSIMODIFY_REFRESH``, ``MSIMODIFY_INSERT``,
    ``MSIMODIFY_UPDATE``, ``MSIMODIFY_ASSIGN``, ``MSIMODIFY_REPLACE``,
    ``MSIMODIFY_MERGE``, ``MSIMODIFY_DELETE``, ``MSIMODIFY_INSERT_TEMPORARY``,
@@ -197,7 +197,7 @@
 
 .. method:: View.Close()
 
-   Close the view, through :cfunc:`MsiViewClose`.
+   Close the view, through :c:func:`MsiViewClose`.
 
 
 .. seealso::
@@ -216,7 +216,7 @@
 
 .. method:: SummaryInformation.GetProperty(field)
 
-   Return a property of the summary, through :cfunc:`MsiSummaryInfoGetProperty`.
+   Return a property of the summary, through :c:func:`MsiSummaryInfoGetProperty`.
    *field* is the name of the property, and can be one of the constants
    ``PID_CODEPAGE``, ``PID_TITLE``, ``PID_SUBJECT``, ``PID_AUTHOR``,
    ``PID_KEYWORDS``, ``PID_COMMENTS``, ``PID_TEMPLATE``, ``PID_LASTAUTHOR``,
@@ -228,12 +228,12 @@
 .. method:: SummaryInformation.GetPropertyCount()
 
    Return the number of summary properties, through
-   :cfunc:`MsiSummaryInfoGetPropertyCount`.
+   :c:func:`MsiSummaryInfoGetPropertyCount`.
 
 
 .. method:: SummaryInformation.SetProperty(field, value)
 
-   Set a property through :cfunc:`MsiSummaryInfoSetProperty`. *field* can have the
+   Set a property through :c:func:`MsiSummaryInfoSetProperty`. *field* can have the
    same values as in :meth:`GetProperty`, *value* is the new value of the property.
    Possible value types are integer and string.
 
@@ -241,7 +241,7 @@
 .. method:: SummaryInformation.Persist()
 
    Write the modified properties to the summary information stream, using
-   :cfunc:`MsiSummaryInfoPersist`.
+   :c:func:`MsiSummaryInfoPersist`.
 
 
 .. seealso::
@@ -260,7 +260,7 @@
 .. method:: Record.GetFieldCount()
 
    Return the number of fields of the record, through
-   :cfunc:`MsiRecordGetFieldCount`.
+   :c:func:`MsiRecordGetFieldCount`.
 
 
 .. method:: Record.GetInteger(field)
@@ -277,25 +277,25 @@
 
 .. method:: Record.SetString(field, value)
 
-   Set *field* to *value* through :cfunc:`MsiRecordSetString`. *field* must be an
+   Set *field* to *value* through :c:func:`MsiRecordSetString`. *field* must be an
    integer; *value* a string.
 
 
 .. method:: Record.SetStream(field, value)
 
    Set *field* to the contents of the file named *value*, through
-   :cfunc:`MsiRecordSetStream`. *field* must be an integer; *value* a string.
+   :c:func:`MsiRecordSetStream`. *field* must be an integer; *value* a string.
 
 
 .. method:: Record.SetInteger(field, value)
 
-   Set *field* to *value* through :cfunc:`MsiRecordSetInteger`. Both *field* and
+   Set *field* to *value* through :c:func:`MsiRecordSetInteger`. Both *field* and
    *value* must be an integer.
 
 
 .. method:: Record.ClearData()
 
-   Set all fields of the record to 0, through :cfunc:`MsiRecordClearData`.
+   Set all fields of the record to 0, through :c:func:`MsiRecordClearData`.
 
 
 .. seealso::
diff --git a/Doc/library/msvcrt.rst b/Doc/library/msvcrt.rst
index 4fc553f..d7fd3fb 100644
--- a/Doc/library/msvcrt.rst
+++ b/Doc/library/msvcrt.rst
@@ -152,5 +152,5 @@
 
 .. function:: heapmin()
 
-   Force the :cfunc:`malloc` heap to clean itself up and return unused blocks to
+   Force the :c:func:`malloc` heap to clean itself up and return unused blocks to
    the operating system.  On failure, this raises :exc:`IOError`.
diff --git a/Doc/library/multiprocessing.rst b/Doc/library/multiprocessing.rst
index c8c2ae8..c0f394b 100644
--- a/Doc/library/multiprocessing.rst
+++ b/Doc/library/multiprocessing.rst
@@ -408,7 +408,7 @@
    .. method:: terminate()
 
       Terminate the process.  On Unix this is done using the ``SIGTERM`` signal;
-      on Windows :cfunc:`TerminateProcess` is used.  Note that exit handlers and
+      on Windows :c:func:`TerminateProcess` is used.  Note that exit handlers and
       finally clauses, etc., will not be executed.
 
       Note that descendant processes of the process will *not* be terminated --
diff --git a/Doc/library/new.rst b/Doc/library/new.rst
index 670d3d7..8dd965e 100644
--- a/Doc/library/new.rst
+++ b/Doc/library/new.rst
@@ -48,7 +48,7 @@
 
 .. function:: code(argcount, nlocals, stacksize, flags, codestring, constants, names, varnames, filename, name, firstlineno, lnotab)
 
-   This function is an interface to the :cfunc:`PyCode_New` C function.
+   This function is an interface to the :c:func:`PyCode_New` C function.
 
    .. XXX This is still undocumented!
 
diff --git a/Doc/library/os.rst b/Doc/library/os.rst
index 2c86076..8c63444 100644
--- a/Doc/library/os.rst
+++ b/Doc/library/os.rst
@@ -94,7 +94,7 @@
 
       On some platforms, including FreeBSD and Mac OS X, setting ``environ`` may
       cause memory leaks.  Refer to the system documentation for
-      :cfunc:`putenv`.
+      :c:func:`putenv`.
 
    If :func:`putenv` is not provided, a modified copy of this mapping  may be
    passed to the appropriate process-creation functions to cause  child processes
@@ -309,7 +309,7 @@
 
 .. function:: setpgrp()
 
-   Call the system call :cfunc:`setpgrp` or :cfunc:`setpgrp(0, 0)` depending on
+   Call the system call :c:func:`setpgrp` or :c:func:`setpgrp(0, 0)` depending on
    which version is implemented (if any).  See the Unix manual for the semantics.
 
    Availability: Unix.
@@ -317,7 +317,7 @@
 
 .. function:: setpgid(pid, pgrp)
 
-   Call the system call :cfunc:`setpgid` to set the process group id of the
+   Call the system call :c:func:`setpgid` to set the process group id of the
    process with id *pid* to the process group with id *pgrp*.  See the Unix manual
    for the semantics.
 
@@ -358,7 +358,7 @@
 
 .. function:: getsid(pid)
 
-   Call the system call :cfunc:`getsid`.  See the Unix manual for the semantics.
+   Call the system call :c:func:`getsid`.  See the Unix manual for the semantics.
 
    Availability: Unix.
 
@@ -367,7 +367,7 @@
 
 .. function:: setsid()
 
-   Call the system call :cfunc:`setsid`.  See the Unix manual for the semantics.
+   Call the system call :c:func:`setsid`.  See the Unix manual for the semantics.
 
    Availability: Unix.
 
@@ -385,7 +385,7 @@
 .. function:: strerror(code)
 
    Return the error message corresponding to the error code in *code*.
-   On platforms where :cfunc:`strerror` returns ``NULL`` when given an unknown
+   On platforms where :c:func:`strerror` returns ``NULL`` when given an unknown
    error number, :exc:`ValueError` is raised.
 
    Availability: Unix, Windows.
@@ -454,7 +454,7 @@
 
    .. versionchanged:: 2.5
       On Unix, when the *mode* argument starts with ``'a'``, the *O_APPEND* flag is
-      set on the file descriptor (which the :cfunc:`fdopen` implementation already
+      set on the file descriptor (which the :c:func:`fdopen` implementation already
       does on most platforms).
 
 
@@ -477,7 +477,7 @@
 
    .. versionchanged:: 2.0
       This function worked unreliably under Windows in earlier versions of Python.
-      This was due to the use of the :cfunc:`_popen` function from the libraries
+      This was due to the use of the :c:func:`_popen` function from the libraries
       provided with Windows.  Newer versions of Python do not use the broken
       implementation from the Windows libraries.
 
@@ -697,7 +697,7 @@
 .. function:: fsync(fd)
 
    Force write of file with filedescriptor *fd* to disk.  On Unix, this calls the
-   native :cfunc:`fsync` function; on Windows, the MS :cfunc:`_commit` function.
+   native :c:func:`fsync` function; on Windows, the MS :c:func:`_commit` function.
 
    If you're starting with a Python file object *f*, first do ``f.flush()``, and
    then do ``os.fsync(f.fileno())``, to ensure that all internal buffers associated
@@ -1142,7 +1142,7 @@
 
 .. function:: lstat(path)
 
-   Perform the equivalent of an :cfunc:`lstat` system call on the given path.
+   Perform the equivalent of an :c:func:`lstat` system call on the given path.
    Similar to :func:`~os.stat`, but does not follow symbolic links.  On
    platforms that do not support symbolic links, this is an alias for
    :func:`~os.stat`.
@@ -1180,7 +1180,7 @@
 .. function:: major(device)
 
    Extract the device major number from a raw device number (usually the
-   :attr:`st_dev` or :attr:`st_rdev` field from :ctype:`stat`).
+   :attr:`st_dev` or :attr:`st_rdev` field from :c:type:`stat`).
 
    .. versionadded:: 2.3
 
@@ -1188,7 +1188,7 @@
 .. function:: minor(device)
 
    Extract the device minor number from a raw device number (usually the
-   :attr:`st_dev` or :attr:`st_rdev` field from :ctype:`stat`).
+   :attr:`st_dev` or :attr:`st_rdev` field from :c:type:`stat`).
 
    .. versionadded:: 2.3
 
@@ -1343,11 +1343,11 @@
 
 .. function:: stat(path)
 
-   Perform the equivalent of a :cfunc:`stat` system call on the given path.
+   Perform the equivalent of a :c:func:`stat` system call on the given path.
    (This function follows symlinks; to stat a symlink use :func:`lstat`.)
 
    The return value is an object whose attributes correspond to the members
-   of the :ctype:`stat` structure, namely:
+   of the :c:type:`stat` structure, namely:
 
    * :attr:`st_mode` - protection bits,
    * :attr:`st_ino` - inode number,
@@ -1404,7 +1404,7 @@
 
    For backward compatibility, the return value of :func:`~os.stat` is also accessible
    as a tuple of at least 10 integers giving the most important (and portable)
-   members of the :ctype:`stat` structure, in the order :attr:`st_mode`,
+   members of the :c:type:`stat` structure, in the order :attr:`st_mode`,
    :attr:`st_ino`, :attr:`st_dev`, :attr:`st_nlink`, :attr:`st_uid`,
    :attr:`st_gid`, :attr:`st_size`, :attr:`st_atime`, :attr:`st_mtime`,
    :attr:`st_ctime`. More items may be added at the end by some implementations.
@@ -1412,7 +1412,7 @@
    .. index:: module: stat
 
    The standard module :mod:`stat` defines functions and constants that are useful
-   for extracting information from a :ctype:`stat` structure. (On Windows, some
+   for extracting information from a :c:type:`stat` structure. (On Windows, some
    items are filled with dummy values.)
 
    Example::
@@ -1461,9 +1461,9 @@
 
 .. function:: statvfs(path)
 
-   Perform a :cfunc:`statvfs` system call on the given path.  The return value is
+   Perform a :c:func:`statvfs` system call on the given path.  The return value is
    an object whose attributes describe the filesystem on the given path, and
-   correspond to the members of the :ctype:`statvfs` structure, namely:
+   correspond to the members of the :c:type:`statvfs` structure, namely:
    :attr:`f_bsize`, :attr:`f_frsize`, :attr:`f_blocks`, :attr:`f_bfree`,
    :attr:`f_bavail`, :attr:`f_files`, :attr:`f_ffree`, :attr:`f_favail`,
    :attr:`f_flag`, :attr:`f_namemax`.
@@ -1473,7 +1473,7 @@
    For backward compatibility, the return value is also accessible as a tuple whose
    values correspond to the attributes, in the order given above. The standard
    module :mod:`statvfs` defines constants that are useful for extracting
-   information from a :ctype:`statvfs` structure when accessing it as a sequence;
+   information from a :c:type:`statvfs` structure when accessing it as a sequence;
    this remains useful when writing code that needs to work with versions of Python
    that don't support accessing the fields as attributes.
 
@@ -1664,7 +1664,7 @@
 program loaded into the process.  In each case, the first of these arguments is
 passed to the new program as its own name rather than as an argument a user may
 have typed on a command line.  For the C programmer, this is the ``argv[0]``
-passed to a program's :cfunc:`main`.  For example, ``os.execv('/bin/echo',
+passed to a program's :c:func:`main`.  For example, ``os.execv('/bin/echo',
 ['foo', 'bar'])`` will only print ``bar`` on standard output; ``foo`` will seem
 to be ignored.
 
@@ -2117,7 +2117,7 @@
    There is no option to wait for the application to close, and no way to retrieve
    the application's exit status.  The *path* parameter is relative to the current
    directory.  If you want to use an absolute path, make sure the first character
-   is not a slash (``'/'``); the underlying Win32 :cfunc:`ShellExecute` function
+   is not a slash (``'/'``); the underlying Win32 :c:func:`ShellExecute` function
    doesn't work if it is.  Use the :func:`os.path.normpath` function to ensure that
    the path is properly encoded for Win32.
 
@@ -2132,13 +2132,13 @@
 .. function:: system(command)
 
    Execute the command (a string) in a subshell.  This is implemented by calling
-   the Standard C function :cfunc:`system`, and has the same limitations.
+   the Standard C function :c:func:`system`, and has the same limitations.
    Changes to :data:`sys.stdin`, etc. are not reflected in the environment of the
    executed command.
 
    On Unix, the return value is the exit status of the process encoded in the
    format specified for :func:`wait`.  Note that POSIX does not specify the meaning
-   of the return value of the C :cfunc:`system` function, so the return value of
+   of the return value of the C :c:func:`system` function, so the return value of
    the Python function is system-dependent.
 
    On Windows, the return value is that returned by the system shell after running
diff --git a/Doc/library/ossaudiodev.rst b/Doc/library/ossaudiodev.rst
index 848eca5..00c113b 100644
--- a/Doc/library/ossaudiodev.rst
+++ b/Doc/library/ossaudiodev.rst
@@ -59,7 +59,7 @@
    what went wrong.
 
    (If :mod:`ossaudiodev` receives an error from a system call such as
-   :cfunc:`open`, :cfunc:`write`, or :cfunc:`ioctl`, it raises :exc:`IOError`.
+   :c:func:`open`, :c:func:`write`, or :c:func:`ioctl`, it raises :exc:`IOError`.
    Errors detected directly by :mod:`ossaudiodev` result in :exc:`OSSAudioError`.)
 
    (For backwards compatibility, the exception class is also available as
diff --git a/Doc/library/platform.rst b/Doc/library/platform.rst
index 0b78d49..49c617f 100644
--- a/Doc/library/platform.rst
+++ b/Doc/library/platform.rst
@@ -33,8 +33,8 @@
    returned as strings.
 
    Values that cannot be determined are returned as given by the parameter presets.
-   If bits is given as ``''``, the :cfunc:`sizeof(pointer)` (or
-   :cfunc:`sizeof(long)` on Python version < 1.5.2) is used as indicator for the
+   If bits is given as ``''``, the :c:func:`sizeof(pointer)` (or
+   :c:func:`sizeof(long)` on Python version < 1.5.2) is used as indicator for the
    supported pointer size.
 
    The function relies on the system's :file:`file` command to do the actual work.
diff --git a/Doc/library/popen2.rst b/Doc/library/popen2.rst
index 4646dd9..628ec6e 100644
--- a/Doc/library/popen2.rst
+++ b/Doc/library/popen2.rst
@@ -104,7 +104,7 @@
 
    Waits for and returns the status code of the child process.  The status code
    encodes both the return code of the process and information about whether it
-   exited using the :cfunc:`exit` system call or died due to a signal.  Functions
+   exited using the :c:func:`exit` system call or died due to a signal.  Functions
    to help interpret the status code are defined in the :mod:`os` module; see
    section :ref:`os-process` for the :func:`W\*` family of functions.
 
diff --git a/Doc/library/posix.rst b/Doc/library/posix.rst
index 8c8ddde..8b5cac0 100644
--- a/Doc/library/posix.rst
+++ b/Doc/library/posix.rst
@@ -38,13 +38,13 @@
 
 Several operating systems (including AIX, HP-UX, Irix and Solaris) provide
 support for files that are larger than 2 GB from a C programming model where
-:ctype:`int` and :ctype:`long` are 32-bit values. This is typically accomplished
+:c:type:`int` and :c:type:`long` are 32-bit values. This is typically accomplished
 by defining the relevant size and offset types as 64-bit values. Such files are
 sometimes referred to as :dfn:`large files`.
 
-Large file support is enabled in Python when the size of an :ctype:`off_t` is
-larger than a :ctype:`long` and the :ctype:`long long` type is available and is
-at least as large as an :ctype:`off_t`. Python longs are then used to represent
+Large file support is enabled in Python when the size of an :c:type:`off_t` is
+larger than a :c:type:`long` and the :c:type:`long long` type is available and is
+at least as large as an :c:type:`off_t`. Python longs are then used to represent
 file sizes, offsets and other values that can exceed the range of a Python int.
 It may be necessary to configure and compile Python with certain compiler flags
 to enable this mode. For example, it is enabled by default with recent versions
diff --git a/Doc/library/re.rst b/Doc/library/re.rst
index fb497f2..df3f9e5 100644
--- a/Doc/library/re.rst
+++ b/Doc/library/re.rst
@@ -1053,14 +1053,14 @@
 
 .. index:: single: scanf()
 
-Python does not currently have an equivalent to :cfunc:`scanf`.  Regular
+Python does not currently have an equivalent to :c:func:`scanf`.  Regular
 expressions are generally more powerful, though also more verbose, than
-:cfunc:`scanf` format strings.  The table below offers some more-or-less
-equivalent mappings between :cfunc:`scanf` format tokens and regular
+:c:func:`scanf` format strings.  The table below offers some more-or-less
+equivalent mappings between :c:func:`scanf` format tokens and regular
 expressions.
 
 +--------------------------------+---------------------------------------------+
-| :cfunc:`scanf` Token           | Regular Expression                          |
+| :c:func:`scanf` Token          | Regular Expression                          |
 +================================+=============================================+
 | ``%c``                         | ``.``                                       |
 +--------------------------------+---------------------------------------------+
@@ -1085,7 +1085,7 @@
 
    /usr/sbin/sendmail - 0 errors, 4 warnings
 
-you would use a :cfunc:`scanf` format like ::
+you would use a :c:func:`scanf` format like ::
 
    %s - %d errors, %d warnings
 
diff --git a/Doc/library/restricted.rst b/Doc/library/restricted.rst
index 28903b7..a40d1e9 100644
--- a/Doc/library/restricted.rst
+++ b/Doc/library/restricted.rst
@@ -31,7 +31,7 @@
 might be deemed "safe" for untrusted code to read any file within a specified
 directory, but never to write a file.  In this case, the supervisor may redefine
 the built-in :func:`open` function so that it raises an exception whenever the
-*mode* parameter is ``'w'``.  It might also perform a :cfunc:`chroot`\ -like
+*mode* parameter is ``'w'``.  It might also perform a :c:func:`chroot`\ -like
 operation on the *filename* parameter, such that root is always relative to some
 safe "sandbox" area of the filesystem.  In this case, the untrusted code would
 still see an built-in :func:`open` function in its environment, with the same
diff --git a/Doc/library/rfc822.rst b/Doc/library/rfc822.rst
index 4c938f5..8e563dd 100644
--- a/Doc/library/rfc822.rst
+++ b/Doc/library/rfc822.rst
@@ -42,8 +42,8 @@
    from a buffered stream.
 
    The optional *seekable* argument is provided as a workaround for certain stdio
-   libraries in which :cfunc:`tell` discards buffered data before discovering that
-   the :cfunc:`lseek` system call doesn't work.  For maximum portability, you
+   libraries in which :c:func:`tell` discards buffered data before discovering that
+   the :c:func:`lseek` system call doesn't work.  For maximum portability, you
    should set the seekable argument to zero to prevent that initial :meth:`tell`
    when passing in an unseekable object such as a file object created from a socket
    object.
diff --git a/Doc/library/select.rst b/Doc/library/select.rst
index 2e08b74..d131cb9 100644
--- a/Doc/library/select.rst
+++ b/Doc/library/select.rst
@@ -6,9 +6,9 @@
    :synopsis: Wait for I/O completion on multiple streams.
 
 
-This module provides access to the :cfunc:`select` and :cfunc:`poll` functions
-available in most operating systems, :cfunc:`epoll` available on Linux 2.5+ and
-:cfunc:`kqueue` available on most BSD.
+This module provides access to the :c:func:`select` and :c:func:`poll` functions
+available in most operating systems, :c:func:`epoll` available on Linux 2.5+ and
+:c:func:`kqueue` available on most BSD.
 Note that on Windows, it only works for sockets; on other operating systems,
 it also works for other file types (in particular, on Unix, it works on pipes).
 It cannot be used on regular files to determine whether a file has grown since
@@ -20,8 +20,8 @@
 .. exception:: error
 
    The exception raised when an error occurs.  The accompanying value is a pair
-   containing the numeric error code from :cdata:`errno` and the corresponding
-   string, as would be printed by the C function :cfunc:`perror`.
+   containing the numeric error code from :c:data:`errno` and the corresponding
+   string, as would be printed by the C function :c:func:`perror`.
 
 
 .. function:: epoll([sizehint=-1])
@@ -60,7 +60,7 @@
 
 .. function:: select(rlist, wlist, xlist[, timeout])
 
-   This is a straightforward interface to the Unix :cfunc:`select` system call.
+   This is a straightforward interface to the Unix :c:func:`select` system call.
    The first three arguments are sequences of 'waitable objects': either
    integers representing file descriptors or objects with a parameterless method
    named :meth:`fileno` returning such an integer:
@@ -96,7 +96,7 @@
       .. index:: single: WinSock
 
       File objects on Windows are not acceptable, but sockets are.  On Windows,
-      the underlying :cfunc:`select` function is provided by the WinSock
+      the underlying :c:func:`select` function is provided by the WinSock
       library, and does not handle file descriptors that don't originate from
       WinSock.
 
@@ -195,13 +195,13 @@
 Polling Objects
 ---------------
 
-The :cfunc:`poll` system call, supported on most Unix systems, provides better
+The :c:func:`poll` system call, supported on most Unix systems, provides better
 scalability for network servers that service many, many clients at the same
-time. :cfunc:`poll` scales better because the system call only requires listing
-the file descriptors of interest, while :cfunc:`select` builds a bitmap, turns
+time. :c:func:`poll` scales better because the system call only requires listing
+the file descriptors of interest, while :c:func:`select` builds a bitmap, turns
 on bits for the fds of interest, and then afterward the whole bitmap has to be
-linearly scanned again. :cfunc:`select` is O(highest file descriptor), while
-:cfunc:`poll` is O(number of file descriptors).
+linearly scanned again. :c:func:`select` is O(highest file descriptor), while
+:c:func:`poll` is O(number of file descriptors).
 
 
 .. method:: poll.register(fd[, eventmask])
diff --git a/Doc/library/signal.rst b/Doc/library/signal.rst
index 9229117..29d56fc 100644
--- a/Doc/library/signal.rst
+++ b/Doc/library/signal.rst
@@ -69,7 +69,7 @@
    All the signal numbers are defined symbolically.  For example, the hangup signal
    is defined as :const:`signal.SIGHUP`; the variable names are identical to the
    names used in C programs, as found in ``<signal.h>``. The Unix man page for
-   ':cfunc:`signal`' lists the existing signals (on some systems this is
+   ':c:func:`signal`' lists the existing signals (on some systems this is
    :manpage:`signal(2)`, on others the list is in :manpage:`signal(7)`). Note that
    not all systems define the same set of signal names; only those names defined by
    the system are defined by this module.
@@ -216,7 +216,7 @@
 
    Note that installing a signal handler with :func:`signal` will reset the
    restart behaviour to interruptible by implicitly calling
-   :cfunc:`siginterrupt` with a true *flag* value for the given signal.
+   :c:func:`siginterrupt` with a true *flag* value for the given signal.
 
    .. versionadded:: 2.6
 
diff --git a/Doc/library/socket.rst b/Doc/library/socket.rst
index 6ace220..bcb317b 100644
--- a/Doc/library/socket.rst
+++ b/Doc/library/socket.rst
@@ -119,7 +119,7 @@
 
    The accompanying value is a pair ``(h_errno, string)`` representing an error
    returned by a library call. *string* represents the description of *h_errno*, as
-   returned by the :cfunc:`hstrerror` C function.
+   returned by the :c:func:`hstrerror` C function.
 
 
 .. exception:: gaierror
@@ -127,7 +127,7 @@
    This exception is raised for address-related errors, for :func:`getaddrinfo` and
    :func:`getnameinfo`. The accompanying value is a pair ``(error, string)``
    representing an error returned by a library call. *string* represents the
-   description of *error*, as returned by the :cfunc:`gai_strerror` C function. The
+   description of *error*, as returned by the :c:func:`gai_strerror` C function. The
    *error* value will match one of the :const:`EAI_\*` constants defined in this
    module.
 
@@ -430,7 +430,7 @@
    Convert an IPv4 address from dotted-quad string format (for example,
    '123.45.67.89') to 32-bit packed binary format, as a string four characters in
    length.  This is useful when conversing with a program that uses the standard C
-   library and needs objects of type :ctype:`struct in_addr`, which is the C type
+   library and needs objects of type :c:type:`struct in_addr`, which is the C type
    for the 32-bit packed binary this function returns.
 
    :func:`inet_aton` also accepts strings with less than three dots; see the
@@ -438,7 +438,7 @@
 
    If the IPv4 address string passed to this function is invalid,
    :exc:`socket.error` will be raised. Note that exactly what is valid depends on
-   the underlying C implementation of :cfunc:`inet_aton`.
+   the underlying C implementation of :c:func:`inet_aton`.
 
    :func:`inet_aton` does not support IPv6, and :func:`inet_pton` should be used
    instead for IPv4/v6 dual stack support.
@@ -449,7 +449,7 @@
    Convert a 32-bit packed IPv4 address (a string four characters in length) to its
    standard dotted-quad string representation (for example, '123.45.67.89').  This
    is useful when conversing with a program that uses the standard C library and
-   needs objects of type :ctype:`struct in_addr`, which is the C type for the
+   needs objects of type :c:type:`struct in_addr`, which is the C type for the
    32-bit packed binary data this function takes as an argument.
 
    If the string passed to this function is not exactly 4 bytes in length,
@@ -461,14 +461,14 @@
 
    Convert an IP address from its family-specific string format to a packed, binary
    format. :func:`inet_pton` is useful when a library or network protocol calls for
-   an object of type :ctype:`struct in_addr` (similar to :func:`inet_aton`) or
-   :ctype:`struct in6_addr`.
+   an object of type :c:type:`struct in_addr` (similar to :func:`inet_aton`) or
+   :c:type:`struct in6_addr`.
 
    Supported values for *address_family* are currently :const:`AF_INET` and
    :const:`AF_INET6`. If the IP address string *ip_string* is invalid,
    :exc:`socket.error` will be raised. Note that exactly what is valid depends on
    both the value of *address_family* and the underlying implementation of
-   :cfunc:`inet_pton`.
+   :c:func:`inet_pton`.
 
    Availability: Unix (maybe not all platforms).
 
@@ -480,8 +480,8 @@
    Convert a packed IP address (a string of some number of characters) to its
    standard, family-specific string representation (for example, ``'7.10.0.5'`` or
    ``'5aef:2b::8'``) :func:`inet_ntop` is useful when a library or network protocol
-   returns an object of type :ctype:`struct in_addr` (similar to :func:`inet_ntoa`)
-   or :ctype:`struct in6_addr`.
+   returns an object of type :c:type:`struct in_addr` (similar to :func:`inet_ntoa`)
+   or :c:type:`struct in6_addr`.
 
    Supported values for *address_family* are currently :const:`AF_INET` and
    :const:`AF_INET6`. If the string *packed_ip* is not the correct length for the
@@ -583,10 +583,10 @@
 .. method:: socket.connect_ex(address)
 
    Like ``connect(address)``, but return an error indicator instead of raising an
-   exception for errors returned by the C-level :cfunc:`connect` call (other
+   exception for errors returned by the C-level :c:func:`connect` call (other
    problems, such as "host not found," can still raise exceptions).  The error
    indicator is ``0`` if the operation succeeded, otherwise the value of the
-   :cdata:`errno` variable.  This is useful to support, for example, asynchronous
+   :c:data:`errno` variable.  This is useful to support, for example, asynchronous
    connects.
 
    .. note::
@@ -661,7 +661,7 @@
 
    Return a :dfn:`file object` associated with the socket.  (File objects are
    described in :ref:`bltin-file-objects`.) The file object
-   references a :cfunc:`dup`\ ped version of the socket file descriptor, so the
+   references a :c:func:`dup`\ ped version of the socket file descriptor, so the
    file object and socket object may be closed or garbage-collected independently.
    The socket must be in blocking mode (it can not have a timeout). The optional
    *mode* and *bufsize* arguments are interpreted the same way as by the built-in
diff --git a/Doc/library/stat.rst b/Doc/library/stat.rst
index 8fd90da..6b0e1b4 100644
--- a/Doc/library/stat.rst
+++ b/Doc/library/stat.rst
@@ -11,8 +11,8 @@
 
 The :mod:`stat` module defines constants and functions for interpreting the
 results of :func:`os.stat`, :func:`os.fstat` and :func:`os.lstat` (if they
-exist).  For complete details about the :cfunc:`stat`, :cfunc:`fstat` and
-:cfunc:`lstat` calls, consult the documentation for your system.
+exist).  For complete details about the :c:func:`stat`, :c:func:`fstat` and
+:c:func:`lstat` calls, consult the documentation for your system.
 
 The :mod:`stat` module defines the following functions to test for specific file
 types:
@@ -70,7 +70,7 @@
 
 Normally, you would use the :func:`os.path.is\*` functions for testing the type
 of a file; the functions here are useful when you are doing multiple tests of
-the same file and wish to avoid the overhead of the :cfunc:`stat` system call
+the same file and wish to avoid the overhead of the :c:func:`stat` system call
 for each test.  These are also useful when checking for information about a file
 that isn't handled by :mod:`os.path`, like the tests for block and character
 devices.
diff --git a/Doc/library/statvfs.rst b/Doc/library/statvfs.rst
index 25355bc..748b7f9 100644
--- a/Doc/library/statvfs.rst
+++ b/Doc/library/statvfs.rst
@@ -61,7 +61,7 @@
 
 .. data:: F_FLAG
 
-   Flags. System dependent: see :cfunc:`statvfs` man page.
+   Flags. System dependent: see :c:func:`statvfs` man page.
 
 
 .. data:: F_NAMEMAX
diff --git a/Doc/library/stdtypes.rst b/Doc/library/stdtypes.rst
index 629f08b..4929671 100644
--- a/Doc/library/stdtypes.rst
+++ b/Doc/library/stdtypes.rst
@@ -226,11 +226,11 @@
 There are four distinct numeric types: :dfn:`plain integers`, :dfn:`long
 integers`, :dfn:`floating point numbers`, and :dfn:`complex numbers`. In
 addition, Booleans are a subtype of plain integers. Plain integers (also just
-called :dfn:`integers`) are implemented using :ctype:`long` in C, which gives
+called :dfn:`integers`) are implemented using :c:type:`long` in C, which gives
 them at least 32 bits of precision (``sys.maxint`` is always set to the maximum
 plain integer value for the current platform, the minimum value is
 ``-sys.maxint - 1``).  Long integers have unlimited precision.  Floating point
-numbers are usually implemented using :ctype:`double` in C; information about
+numbers are usually implemented using :c:type:`double` in C; information about
 the precision and internal representation of floating point numbers for the
 machine on which your program is running is available in
 :data:`sys.float_info`.  Complex numbers have a real and imaginary part, which
@@ -1335,7 +1335,7 @@
 *interpolation* operator.  Given ``format % values`` (where *format* is a string
 or Unicode object), ``%`` conversion specifications in *format* are replaced
 with zero or more elements of *values*.  The effect is similar to the using
-:cfunc:`sprintf` in the C language.  If *format* is a Unicode object, or if any
+:c:func:`sprintf` in the C language.  If *format* is a Unicode object, or if any
 of the objects being converted using the ``%s`` conversion are Unicode objects,
 the result will also be a Unicode object.
 
@@ -2331,7 +2331,7 @@
 
 .. method:: file.flush()
 
-   Flush the internal buffer, like ``stdio``'s :cfunc:`fflush`.  This may be a
+   Flush the internal buffer, like ``stdio``'s :c:func:`fflush`.  This may be a
    no-op on some file-like objects.
 
    .. note::
@@ -2392,14 +2392,14 @@
    all data until EOF is reached.  The bytes are returned as a string object.  An
    empty string is returned when EOF is encountered immediately.  (For certain
    files, like ttys, it makes sense to continue reading after an EOF is hit.)  Note
-   that this method may call the underlying C function :cfunc:`fread` more than
+   that this method may call the underlying C function :c:func:`fread` more than
    once in an effort to acquire as close to *size* bytes as possible. Also note
    that when in non-blocking mode, less data than was requested may be
    returned, even if no *size* parameter was given.
 
    .. note::
       This function is simply a wrapper for the underlying
-      :cfunc:`fread` C function, and will behave the same in corner cases,
+      :c:func:`fread` C function, and will behave the same in corner cases,
       such as whether the EOF value is cached.
 
 
@@ -2414,7 +2414,7 @@
 
    .. note::
 
-      Unlike ``stdio``'s :cfunc:`fgets`, the returned string contains null characters
+      Unlike ``stdio``'s :c:func:`fgets`, the returned string contains null characters
       (``'\0'``) if they occurred in the input.
 
 
@@ -2440,7 +2440,7 @@
 
 .. method:: file.seek(offset[, whence])
 
-   Set the file's current position, like ``stdio``'s :cfunc:`fseek`. The *whence*
+   Set the file's current position, like ``stdio``'s :c:func:`fseek`. The *whence*
    argument is optional and defaults to  ``os.SEEK_SET`` or ``0`` (absolute file
    positioning); other values are ``os.SEEK_CUR`` or ``1`` (seek relative to the
    current position) and ``os.SEEK_END`` or ``2``  (seek relative to the file's
@@ -2465,11 +2465,11 @@
 
 .. method:: file.tell()
 
-   Return the file's current position, like ``stdio``'s :cfunc:`ftell`.
+   Return the file's current position, like ``stdio``'s :c:func:`ftell`.
 
    .. note::
 
-      On Windows, :meth:`tell` can return illegal values (after an :cfunc:`fgets`)
+      On Windows, :meth:`tell` can return illegal values (after an :c:func:`fgets`)
       when reading files with Unix-style line-endings. Use binary mode (``'rb'``) to
       circumvent this problem.
 
diff --git a/Doc/library/struct.rst b/Doc/library/struct.rst
index 817c570..4331665 100644
--- a/Doc/library/struct.rst
+++ b/Doc/library/struct.rst
@@ -162,60 +162,60 @@
 ``'='``.  When using native size, the size of the packed value is
 platform-dependent.
 
-+--------+-------------------------+--------------------+----------------+------------+
-| Format | C Type                  | Python type        | Standard size  | Notes      |
-+========+=========================+====================+================+============+
-| ``x``  | pad byte                | no value           |                |            |
-+--------+-------------------------+--------------------+----------------+------------+
-| ``c``  | :ctype:`char`           | string of length 1 | 1              |            |
-+--------+-------------------------+--------------------+----------------+------------+
-| ``b``  | :ctype:`signed char`    | integer            | 1              | \(3)       |
-+--------+-------------------------+--------------------+----------------+------------+
-| ``B``  | :ctype:`unsigned char`  | integer            | 1              | \(3)       |
-+--------+-------------------------+--------------------+----------------+------------+
-| ``?``  | :ctype:`_Bool`          | bool               | 1              | \(1)       |
-+--------+-------------------------+--------------------+----------------+------------+
-| ``h``  | :ctype:`short`          | integer            | 2              | \(3)       |
-+--------+-------------------------+--------------------+----------------+------------+
-| ``H``  | :ctype:`unsigned short` | integer            | 2              | \(3)       |
-+--------+-------------------------+--------------------+----------------+------------+
-| ``i``  | :ctype:`int`            | integer            | 4              | \(3)       |
-+--------+-------------------------+--------------------+----------------+------------+
-| ``I``  | :ctype:`unsigned int`   | integer            | 4              | \(3)       |
-+--------+-------------------------+--------------------+----------------+------------+
-| ``l``  | :ctype:`long`           | integer            | 4              | \(3)       |
-+--------+-------------------------+--------------------+----------------+------------+
-| ``L``  | :ctype:`unsigned long`  | integer            | 4              | \(3)       |
-+--------+-------------------------+--------------------+----------------+------------+
-| ``q``  | :ctype:`long long`      | integer            | 8              | \(2), \(3) |
-+--------+-------------------------+--------------------+----------------+------------+
-| ``Q``  | :ctype:`unsigned long   | integer            | 8              | \(2), \(3) |
-|        | long`                   |                    |                |            |
-+--------+-------------------------+--------------------+----------------+------------+
-| ``f``  | :ctype:`float`          | float              | 4              | \(4)       |
-+--------+-------------------------+--------------------+----------------+------------+
-| ``d``  | :ctype:`double`         | float              | 8              | \(4)       |
-+--------+-------------------------+--------------------+----------------+------------+
-| ``s``  | :ctype:`char[]`         | string             |                |            |
-+--------+-------------------------+--------------------+----------------+------------+
-| ``p``  | :ctype:`char[]`         | string             |                |            |
-+--------+-------------------------+--------------------+----------------+------------+
-| ``P``  | :ctype:`void \*`        | integer            |                | \(5), \(3) |
-+--------+-------------------------+--------------------+----------------+------------+
++--------+--------------------------+--------------------+----------------+------------+
+| Format | C Type                   | Python type        | Standard size  | Notes      |
++========+==========================+====================+================+============+
+| ``x``  | pad byte                 | no value           |                |            |
++--------+--------------------------+--------------------+----------------+------------+
+| ``c``  | :c:type:`char`           | string of length 1 | 1              |            |
++--------+--------------------------+--------------------+----------------+------------+
+| ``b``  | :c:type:`signed char`    | integer            | 1              | \(3)       |
++--------+--------------------------+--------------------+----------------+------------+
+| ``B``  | :c:type:`unsigned char`  | integer            | 1              | \(3)       |
++--------+--------------------------+--------------------+----------------+------------+
+| ``?``  | :c:type:`_Bool`          | bool               | 1              | \(1)       |
++--------+--------------------------+--------------------+----------------+------------+
+| ``h``  | :c:type:`short`          | integer            | 2              | \(3)       |
++--------+--------------------------+--------------------+----------------+------------+
+| ``H``  | :c:type:`unsigned short` | integer            | 2              | \(3)       |
++--------+--------------------------+--------------------+----------------+------------+
+| ``i``  | :c:type:`int`            | integer            | 4              | \(3)       |
++--------+--------------------------+--------------------+----------------+------------+
+| ``I``  | :c:type:`unsigned int`   | integer            | 4              | \(3)       |
++--------+--------------------------+--------------------+----------------+------------+
+| ``l``  | :c:type:`long`           | integer            | 4              | \(3)       |
++--------+--------------------------+--------------------+----------------+------------+
+| ``L``  | :c:type:`unsigned long`  | integer            | 4              | \(3)       |
++--------+--------------------------+--------------------+----------------+------------+
+| ``q``  | :c:type:`long long`      | integer            | 8              | \(2), \(3) |
++--------+--------------------------+--------------------+----------------+------------+
+| ``Q``  | :c:type:`unsigned long   | integer            | 8              | \(2), \(3) |
+|        | long`                    |                    |                |            |
++--------+--------------------------+--------------------+----------------+------------+
+| ``f``  | :c:type:`float`          | float              | 4              | \(4)       |
++--------+--------------------------+--------------------+----------------+------------+
+| ``d``  | :c:type:`double`         | float              | 8              | \(4)       |
++--------+--------------------------+--------------------+----------------+------------+
+| ``s``  | :c:type:`char[]`         | string             |                |            |
++--------+--------------------------+--------------------+----------------+------------+
+| ``p``  | :c:type:`char[]`         | string             |                |            |
++--------+--------------------------+--------------------+----------------+------------+
+| ``P``  | :c:type:`void \*`        | integer            |                | \(5), \(3) |
++--------+--------------------------+--------------------+----------------+------------+
 
 Notes:
 
 (1)
-   The ``'?'`` conversion code corresponds to the :ctype:`_Bool` type defined by
-   C99. If this type is not available, it is simulated using a :ctype:`char`. In
+   The ``'?'`` conversion code corresponds to the :c:type:`_Bool` type defined by
+   C99. If this type is not available, it is simulated using a :c:type:`char`. In
    standard mode, it is always represented by one byte.
 
    .. versionadded:: 2.6
 
 (2)
    The ``'q'`` and ``'Q'`` conversion codes are available in native mode only if
-   the platform C compiler supports C :ctype:`long long`, or, on Windows,
-   :ctype:`__int64`.  They are always available in standard modes.
+   the platform C compiler supports C :c:type:`long long`, or, on Windows,
+   :c:type:`__int64`.  They are always available in standard modes.
 
    .. versionadded:: 2.2
 
diff --git a/Doc/library/subprocess.rst b/Doc/library/subprocess.rst
index 274a6d9..2ba960a 100644
--- a/Doc/library/subprocess.rst
+++ b/Doc/library/subprocess.rst
@@ -472,7 +472,7 @@
 .. method:: Popen.terminate()
 
    Stop the child. On Posix OSs the method sends SIGTERM to the
-   child. On Windows the Win32 API function :cfunc:`TerminateProcess` is called
+   child. On Windows the Win32 API function :c:func:`TerminateProcess` is called
    to stop the child.
 
    .. versionadded:: 2.6
diff --git a/Doc/library/sunaudio.rst b/Doc/library/sunaudio.rst
index 9637b09..148eb5e 100644
--- a/Doc/library/sunaudio.rst
+++ b/Doc/library/sunaudio.rst
@@ -93,10 +93,10 @@
    names and meanings of the attributes are described in ``<sun/audioio.h>`` and in
    the :manpage:`audio(7I)` manual page.  Member names are slightly different from
    their C counterparts: a status object is only a single structure. Members of the
-   :cdata:`play` substructure have ``o_`` prepended to their name and members of
-   the :cdata:`record` structure have ``i_``. So, the C member
-   :cdata:`play.sample_rate` is accessed as :attr:`o_sample_rate`,
-   :cdata:`record.gain` as :attr:`i_gain` and :cdata:`monitor_gain` plainly as
+   :c:data:`play` substructure have ``o_`` prepended to their name and members of
+   the :c:data:`record` structure have ``i_``. So, the C member
+   :c:data:`play.sample_rate` is accessed as :attr:`o_sample_rate`,
+   :c:data:`record.gain` as :attr:`i_gain` and :c:data:`monitor_gain` plainly as
    :attr:`monitor_gain`.
 
 
diff --git a/Doc/library/sys.rst b/Doc/library/sys.rst
index a8b62da..2ddf5a8 100644
--- a/Doc/library/sys.rst
+++ b/Doc/library/sys.rst
@@ -388,7 +388,7 @@
 
 .. function:: getdlopenflags()
 
-   Return the current value of the flags that are used for :cfunc:`dlopen` calls.
+   Return the current value of the flags that are used for :c:func:`dlopen` calls.
    The flag constants are defined in the :mod:`dl` and :mod:`DLFCN` modules.
    Availability: Unix.
 
@@ -533,8 +533,8 @@
    +---------------------------------------+---------------------------------+
 
 
-   This function wraps the Win32 :cfunc:`GetVersionEx` function; see the
-   Microsoft documentation on :cfunc:`OSVERSIONINFOEX` for more information
+   This function wraps the Win32 :c:func:`GetVersionEx` function; see the
+   Microsoft documentation on :c:func:`OSVERSIONINFOEX` for more information
    about these fields.
 
    Availability: Windows.
@@ -827,7 +827,7 @@
 
 .. function:: setdlopenflags(n)
 
-   Set the flags used by the interpreter for :cfunc:`dlopen` calls, such as when
+   Set the flags used by the interpreter for :c:func:`dlopen` calls, such as when
    the interpreter loads extension modules.  Among other things, this will enable a
    lazy resolving of symbols when importing a module, if called as
    ``sys.setdlopenflags(0)``.  To share symbols across extension modules, call as
diff --git a/Doc/library/time.rst b/Doc/library/time.rst
index 18a8bc6..56e9019 100644
--- a/Doc/library/time.rst
+++ b/Doc/library/time.rst
@@ -74,8 +74,8 @@
 * On the other hand, the precision of :func:`time` and :func:`sleep` is better
   than their Unix equivalents: times are expressed as floating point numbers,
   :func:`time` returns the most accurate time available (using Unix
-  :cfunc:`gettimeofday` where available), and :func:`sleep` will accept a time
-  with a nonzero fraction (Unix :cfunc:`select` is used to implement this, where
+  :c:func:`gettimeofday` where available), and :func:`sleep` will accept a time
+  with a nonzero fraction (Unix :c:func:`select` is used to implement this, where
   available).
 
 * The time value as returned by :func:`gmtime`, :func:`localtime`, and
@@ -156,7 +156,7 @@
 
    On Windows, this function returns wall-clock seconds elapsed since the first
    call to this function, as a floating point number, based on the Win32 function
-   :cfunc:`QueryPerformanceCounter`. The resolution is typically better than one
+   :c:func:`QueryPerformanceCounter`. The resolution is typically better than one
    microsecond.
 
 
diff --git a/Doc/library/warnings.rst b/Doc/library/warnings.rst
index dbcf148..6f3c105 100644
--- a/Doc/library/warnings.rst
+++ b/Doc/library/warnings.rst
@@ -19,7 +19,7 @@
 might want to issue a warning when a program uses an obsolete module.
 
 Python programmers issue warnings by calling the :func:`warn` function defined
-in this module.  (C programmers use :cfunc:`PyErr_WarnEx`; see
+in this module.  (C programmers use :c:func:`PyErr_WarnEx`; see
 :ref:`exceptionhandling` for details).
 
 Warning messages are normally written to ``sys.stderr``, but their disposition
diff --git a/Doc/library/winsound.rst b/Doc/library/winsound.rst
index b4a3391..2325081 100644
--- a/Doc/library/winsound.rst
+++ b/Doc/library/winsound.rst
@@ -27,7 +27,7 @@
 
 .. function:: PlaySound(sound, flags)
 
-   Call the underlying :cfunc:`PlaySound` function from the Platform API.  The
+   Call the underlying :c:func:`PlaySound` function from the Platform API.  The
    *sound* parameter may be a filename, audio data as a string, or ``None``.  Its
    interpretation depends on the value of *flags*, which can be a bitwise ORed
    combination of the constants described below. If the *sound* parameter is
@@ -37,7 +37,7 @@
 
 .. function:: MessageBeep([type=MB_OK])
 
-   Call the underlying :cfunc:`MessageBeep` function from the Platform API.  This
+   Call the underlying :c:func:`MessageBeep` function from the Platform API.  This
    plays a sound as specified in the registry.  The *type* argument specifies which
    sound to play; possible values are ``-1``, ``MB_ICONASTERISK``,
    ``MB_ICONEXCLAMATION``, ``MB_ICONHAND``, ``MB_ICONQUESTION``, and ``MB_OK``, all
diff --git a/Doc/library/zlib.rst b/Doc/library/zlib.rst
index 0118704..92a3197 100644
--- a/Doc/library/zlib.rst
+++ b/Doc/library/zlib.rst
@@ -132,7 +132,7 @@
    *bufsize* is the initial size of the buffer used to hold decompressed data.  If
    more space is required, the buffer size will be increased as needed, so you
    don't have to get this value exactly right; tuning it will only save a few calls
-   to :cfunc:`malloc`.  The default size is 16384.
+   to :c:func:`malloc`.  The default size is 16384.
 
 
 .. function:: decompressobj([wbits])
diff --git a/Doc/reference/expressions.rst b/Doc/reference/expressions.rst
index 084c6e4..b3372a5 100644
--- a/Doc/reference/expressions.rst
+++ b/Doc/reference/expressions.rst
@@ -719,7 +719,7 @@
    An implementation may provide built-in functions whose positional parameters
    do not have names, even if they are 'named' for the purpose of documentation,
    and which therefore cannot be supplied by keyword.  In CPython, this is the
-   case for functions implemented in C that use :cfunc:`PyArg_ParseTuple` to
+   case for functions implemented in C that use :c:func:`PyArg_ParseTuple` to
    parse their arguments.
 
 If there are more positional arguments than there are formal parameter slots, a
diff --git a/Doc/tools/sphinxext/susp-ignored.csv b/Doc/tools/sphinxext/susp-ignored.csv
index e82a82b..d078583 100644
--- a/Doc/tools/sphinxext/susp-ignored.csv
+++ b/Doc/tools/sphinxext/susp-ignored.csv
@@ -236,9 +236,9 @@
 documenting/markup,95,.. function:,.. function:: spam(eggs)
 documenting/markup,95,:noindex,:noindex:
 documenting/markup,101,.. method:,.. method:: FileInput.input(...)
-documenting/markup,121,.. cfunction:,".. cfunction:: PyObject* PyType_GenericAlloc(PyTypeObject *type, Py_ssize_t nitems)"
-documenting/markup,131,.. cmember:,.. cmember:: PyObject* PyTypeObject.tp_bases
-documenting/markup,150,.. cvar:,.. cvar:: PyObject* PyClass_Type
+documenting/markup,121,.. cfunction:,".. c:function:: PyObject* PyType_GenericAlloc(PyTypeObject *type, Py_ssize_t nitems)"
+documenting/markup,131,.. cmember:,.. c:member:: PyObject* PyTypeObject.tp_bases
+documenting/markup,150,.. cvar:,.. c:var:: PyObject* PyClass_Type
 documenting/markup,179,.. function:,".. function:: Timer.repeat([repeat=3[, number=1000000]])"
 documenting/markup,209,.. cmdoption:,.. cmdoption:: -m <module>
 documenting/markup,227,.. describe:,.. describe:: opcode
diff --git a/Doc/tutorial/inputoutput.rst b/Doc/tutorial/inputoutput.rst
index 3441f54..daad58d 100644
--- a/Doc/tutorial/inputoutput.rst
+++ b/Doc/tutorial/inputoutput.rst
@@ -207,7 +207,7 @@
 ---------------------
 
 The ``%`` operator can also be used for string formatting. It interprets the
-left argument much like a :cfunc:`sprintf`\ -style format string to be applied
+left argument much like a :c:func:`sprintf`\ -style format string to be applied
 to the right argument, and returns the string resulting from this formatting
 operation. For example::
 
diff --git a/Doc/whatsnew/2.2.rst b/Doc/whatsnew/2.2.rst
index 89e4d76..412c1d0 100644
--- a/Doc/whatsnew/2.2.rst
+++ b/Doc/whatsnew/2.2.rst
@@ -754,7 +754,7 @@
 
 * Classes can define methods called :meth:`__truediv__` and :meth:`__floordiv__`
   to overload the two division operators.  At the C level, there are also slots in
-  the :ctype:`PyNumberMethods` structure so extension types can define the two
+  the :c:type:`PyNumberMethods` structure so extension types can define the two
   operators.
 
 * Python 2.2 supports some command-line arguments for testing whether code will
@@ -983,7 +983,7 @@
   Jun-ichiro "itojun" Hagino.)
 
 * Two new format characters were added to the :mod:`struct` module for 64-bit
-  integers on platforms that support the C :ctype:`long long` type.  ``q`` is for
+  integers on platforms that support the C :c:type:`long long` type.  ``q`` is for
   a signed 64-bit integer, and ``Q`` is for an unsigned one.  The value is
   returned in Python's long integer type.  (Contributed by Tim Peters.)
 
@@ -1057,16 +1057,16 @@
   at much higher speeds than Python-based functions and should reduce the overhead
   of profiling and tracing.  This  will be of interest to authors of development
   environments for Python.  Two new C functions were added to Python's API,
-  :cfunc:`PyEval_SetProfile` and :cfunc:`PyEval_SetTrace`. The existing
+  :c:func:`PyEval_SetProfile` and :c:func:`PyEval_SetTrace`. The existing
   :func:`sys.setprofile` and :func:`sys.settrace` functions still exist, and have
   simply been changed to use the new C-level interface.  (Contributed by Fred L.
   Drake, Jr.)
 
 * Another low-level API, primarily of interest to implementors of Python
-  debuggers and development tools, was added. :cfunc:`PyInterpreterState_Head` and
-  :cfunc:`PyInterpreterState_Next` let a caller walk through all the existing
-  interpreter objects; :cfunc:`PyInterpreterState_ThreadHead` and
-  :cfunc:`PyThreadState_Next` allow looping over all the thread states for a given
+  debuggers and development tools, was added. :c:func:`PyInterpreterState_Head` and
+  :c:func:`PyInterpreterState_Next` let a caller walk through all the existing
+  interpreter objects; :c:func:`PyInterpreterState_ThreadHead` and
+  :c:func:`PyThreadState_Next` allow looping over all the thread states for a given
   interpreter.  (Contributed by David Beazley.)
 
 * The C-level interface to the garbage collector has been changed to make it
@@ -1078,19 +1078,19 @@
 
   To upgrade an extension module to the new API, perform the following steps:
 
-* Rename :cfunc:`Py_TPFLAGS_GC` to :cfunc:`PyTPFLAGS_HAVE_GC`.
+* Rename :c:func:`Py_TPFLAGS_GC` to :c:func:`PyTPFLAGS_HAVE_GC`.
 
-* Use :cfunc:`PyObject_GC_New` or :cfunc:`PyObject_GC_NewVar` to allocate
-    objects, and :cfunc:`PyObject_GC_Del` to deallocate them.
+* Use :c:func:`PyObject_GC_New` or :c:func:`PyObject_GC_NewVar` to allocate
+    objects, and :c:func:`PyObject_GC_Del` to deallocate them.
 
-* Rename :cfunc:`PyObject_GC_Init` to :cfunc:`PyObject_GC_Track` and
-    :cfunc:`PyObject_GC_Fini` to :cfunc:`PyObject_GC_UnTrack`.
+* Rename :c:func:`PyObject_GC_Init` to :c:func:`PyObject_GC_Track` and
+    :c:func:`PyObject_GC_Fini` to :c:func:`PyObject_GC_UnTrack`.
 
-* Remove :cfunc:`PyGC_HEAD_SIZE` from object size calculations.
+* Remove :c:func:`PyGC_HEAD_SIZE` from object size calculations.
 
-* Remove calls to :cfunc:`PyObject_AS_GC` and :cfunc:`PyObject_FROM_GC`.
+* Remove calls to :c:func:`PyObject_AS_GC` and :c:func:`PyObject_FROM_GC`.
 
-* A new ``et`` format sequence was added to :cfunc:`PyArg_ParseTuple`; ``et``
+* A new ``et`` format sequence was added to :c:func:`PyArg_ParseTuple`; ``et``
   takes both a parameter and an encoding name, and converts the parameter to the
   given encoding if the parameter turns out to be a Unicode string, or leaves it
   alone if it's an 8-bit string, assuming it to already be in the desired
@@ -1099,10 +1099,10 @@
   specified new encoding. (Contributed by M.-A. Lemburg, and used for the MBCS
   support on Windows described in the following section.)
 
-* A different argument parsing function, :cfunc:`PyArg_UnpackTuple`, has been
+* A different argument parsing function, :c:func:`PyArg_UnpackTuple`, has been
   added that's simpler and presumably faster.  Instead of specifying a format
   string, the caller simply gives the minimum and maximum number of arguments
-  expected, and a set of pointers to :ctype:`PyObject\*` variables that will be
+  expected, and a set of pointers to :c:type:`PyObject\*` variables that will be
   filled in with argument values.
 
 * Two new flags :const:`METH_NOARGS` and :const:`METH_O` are available in method
@@ -1111,14 +1111,14 @@
   corresponding method that uses :const:`METH_VARARGS`.  Also, the old
   :const:`METH_OLDARGS` style of writing C methods is  now officially deprecated.
 
-* Two new wrapper functions, :cfunc:`PyOS_snprintf` and :cfunc:`PyOS_vsnprintf`
+* Two new wrapper functions, :c:func:`PyOS_snprintf` and :c:func:`PyOS_vsnprintf`
   were added to provide  cross-platform implementations for the relatively new
-  :cfunc:`snprintf` and :cfunc:`vsnprintf` C lib APIs. In contrast to the standard
-  :cfunc:`sprintf` and :cfunc:`vsprintf` functions, the Python versions check the
+  :c:func:`snprintf` and :c:func:`vsnprintf` C lib APIs. In contrast to the standard
+  :c:func:`sprintf` and :c:func:`vsprintf` functions, the Python versions check the
   bounds of the buffer used to protect against buffer overruns. (Contributed by
   M.-A. Lemburg.)
 
-* The :cfunc:`_PyTuple_Resize` function has lost an unused parameter, so now it
+* The :c:func:`_PyTuple_Resize` function has lost an unused parameter, so now it
   takes 2 parameters instead of 3.  The third argument was never used, and can
   simply be discarded when porting code from earlier versions to Python 2.2.
 
@@ -1219,7 +1219,7 @@
   operator, but these features were rarely used and therefore buggy.  The
   :meth:`tolist` method and the :attr:`start`, :attr:`stop`, and :attr:`step`
   attributes are also being deprecated.  At the C level, the fourth argument to
-  the :cfunc:`PyRange_New` function, ``repeat``, has also been deprecated.
+  the :c:func:`PyRange_New` function, ``repeat``, has also been deprecated.
 
 * There were a bunch of patches to the dictionary implementation, mostly to fix
   potential core dumps if a dictionary contains objects that sneakily changed
@@ -1242,8 +1242,8 @@
   up to display the output.  This patch makes it possible to import such scripts,
   in case they're also usable as modules.  (Implemented by David Bolen.)
 
-* On platforms where Python uses the C :cfunc:`dlopen` function  to load
-  extension modules, it's now possible to set the flags used  by :cfunc:`dlopen`
+* On platforms where Python uses the C :c:func:`dlopen` function  to load
+  extension modules, it's now possible to set the flags used  by :c:func:`dlopen`
   using the :func:`sys.getdlopenflags` and :func:`sys.setdlopenflags` functions.
   (Contributed by Bram Stolk.)
 
diff --git a/Doc/whatsnew/2.3.rst b/Doc/whatsnew/2.3.rst
index 31a5fe2..b034eb2 100644
--- a/Doc/whatsnew/2.3.rst
+++ b/Doc/whatsnew/2.3.rst
@@ -1797,8 +1797,8 @@
 
 Pymalloc, a specialized object allocator written by Vladimir Marangozov, was a
 feature added to Python 2.1.  Pymalloc is intended to be faster than the system
-:cfunc:`malloc` and to have less memory overhead for allocation patterns typical
-of Python programs. The allocator uses C's :cfunc:`malloc` function to get large
+:c:func:`malloc` and to have less memory overhead for allocation patterns typical
+of Python programs. The allocator uses C's :c:func:`malloc` function to get large
 pools of memory and then fulfills smaller memory requests from these pools.
 
 In 2.1 and 2.2, pymalloc was an experimental feature and wasn't enabled by
@@ -1814,13 +1814,13 @@
 
 There's one particularly common error that causes problems.  There are a number
 of memory allocation functions in Python's C API that have previously just been
-aliases for the C library's :cfunc:`malloc` and :cfunc:`free`, meaning that if
+aliases for the C library's :c:func:`malloc` and :c:func:`free`, meaning that if
 you accidentally called mismatched functions the error wouldn't be noticeable.
 When the object allocator is enabled, these functions aren't aliases of
-:cfunc:`malloc` and :cfunc:`free` any more, and calling the wrong function to
+:c:func:`malloc` and :c:func:`free` any more, and calling the wrong function to
 free memory may get you a core dump.  For example, if memory was allocated using
-:cfunc:`PyObject_Malloc`, it has to be freed using :cfunc:`PyObject_Free`, not
-:cfunc:`free`.  A few modules included with Python fell afoul of this and had to
+:c:func:`PyObject_Malloc`, it has to be freed using :c:func:`PyObject_Free`, not
+:c:func:`free`.  A few modules included with Python fell afoul of this and had to
 be fixed; doubtless there are more third-party modules that will have the same
 problem.
 
@@ -1831,14 +1831,14 @@
 specifically for allocating Python objects.
 
 * To allocate and free an undistinguished chunk of memory use the "raw memory"
-  family: :cfunc:`PyMem_Malloc`, :cfunc:`PyMem_Realloc`, and :cfunc:`PyMem_Free`.
+  family: :c:func:`PyMem_Malloc`, :c:func:`PyMem_Realloc`, and :c:func:`PyMem_Free`.
 
 * The "object memory" family is the interface to the pymalloc facility described
   above and is biased towards a large number of "small" allocations:
-  :cfunc:`PyObject_Malloc`, :cfunc:`PyObject_Realloc`, and :cfunc:`PyObject_Free`.
+  :c:func:`PyObject_Malloc`, :c:func:`PyObject_Realloc`, and :c:func:`PyObject_Free`.
 
 * To allocate and free Python objects, use the "object" family
-  :cfunc:`PyObject_New`, :cfunc:`PyObject_NewVar`, and :cfunc:`PyObject_Del`.
+  :c:func:`PyObject_New`, :c:func:`PyObject_NewVar`, and :c:func:`PyObject_Del`.
 
 Thanks to lots of work by Tim Peters, pymalloc in 2.3 also provides debugging
 features to catch memory overwrites and doubled frees in both extension modules
@@ -1877,10 +1877,10 @@
   (:file:`libpython2.3.so`) by supplying :option:`--enable-shared` when running
   Python's :program:`configure` script.  (Contributed by Ondrej Palkovsky.)
 
-* The :cmacro:`DL_EXPORT` and :cmacro:`DL_IMPORT` macros are now deprecated.
+* The :c:macro:`DL_EXPORT` and :c:macro:`DL_IMPORT` macros are now deprecated.
   Initialization functions for Python extension modules should now be declared
-  using the new macro :cmacro:`PyMODINIT_FUNC`, while the Python core will
-  generally use the :cmacro:`PyAPI_FUNC` and :cmacro:`PyAPI_DATA` macros.
+  using the new macro :c:macro:`PyMODINIT_FUNC`, while the Python core will
+  generally use the :c:macro:`PyAPI_FUNC` and :c:macro:`PyAPI_DATA` macros.
 
 * The interpreter can be compiled without any docstrings for the built-in
   functions and modules by supplying :option:`--without-doc-strings` to the
@@ -1888,19 +1888,19 @@
   but will also mean that you can't get help for Python's built-ins.  (Contributed
   by Gustavo Niemeyer.)
 
-* The :cfunc:`PyArg_NoArgs` macro is now deprecated, and code that uses it
+* The :c:func:`PyArg_NoArgs` macro is now deprecated, and code that uses it
   should be changed.  For Python 2.2 and later, the method definition table can
   specify the :const:`METH_NOARGS` flag, signalling that there are no arguments,
   and the argument checking can then be removed.  If compatibility with pre-2.2
   versions of Python is important, the code could use ``PyArg_ParseTuple(args,
   "")`` instead, but this will be slower than using :const:`METH_NOARGS`.
 
-* :cfunc:`PyArg_ParseTuple` accepts new format characters for various sizes of
-  unsigned integers: ``B`` for :ctype:`unsigned char`, ``H`` for :ctype:`unsigned
-  short int`,  ``I`` for :ctype:`unsigned int`,  and ``K`` for :ctype:`unsigned
+* :c:func:`PyArg_ParseTuple` accepts new format characters for various sizes of
+  unsigned integers: ``B`` for :c:type:`unsigned char`, ``H`` for :c:type:`unsigned
+  short int`,  ``I`` for :c:type:`unsigned int`,  and ``K`` for :c:type:`unsigned
   long long`.
 
-* A new function, :cfunc:`PyObject_DelItemString(mapping, char \*key)` was added
+* A new function, :c:func:`PyObject_DelItemString(mapping, char \*key)` was added
   as shorthand for ``PyObject_DelItem(mapping, PyString_New(key))``.
 
 * File objects now manage their internal string buffer differently, increasing
@@ -1910,7 +1910,7 @@
 
 * It's now possible to define class and static methods for a C extension type by
   setting either the :const:`METH_CLASS` or :const:`METH_STATIC` flags in a
-  method's :ctype:`PyMethodDef` structure.
+  method's :c:type:`PyMethodDef` structure.
 
 * Python now includes a copy of the Expat XML parser's source code, removing any
   dependence on a system version or local installation of Expat.
diff --git a/Doc/whatsnew/2.4.rst b/Doc/whatsnew/2.4.rst
index a602f75..97418ab 100644
--- a/Doc/whatsnew/2.4.rst
+++ b/Doc/whatsnew/2.4.rst
@@ -469,7 +469,7 @@
 ==========================
 
 Python has always supported floating-point (FP) numbers, based on the underlying
-C :ctype:`double` type, as a data type.  However, while most programming
+C :c:type:`double` type, as a data type.  However, while most programming
 languages provide a floating-point type, many people (even programmers) are
 unaware that floating-point numbers don't represent certain decimal fractions
 accurately.  The new :class:`Decimal` type can represent these fractions
@@ -498,7 +498,7 @@
 5.
 
 Modern systems usually provide floating-point support that conforms to a
-standard called IEEE 754.  C's :ctype:`double` type is usually implemented as a
+standard called IEEE 754.  C's :c:type:`double` type is usually implemented as a
 64-bit IEEE 754 number, which uses 52 bits of space for the mantissa.  This
 means that numbers can only be specified to 52 bits of precision.  If you're
 trying to represent numbers whose expansion repeats endlessly, the expansion is
@@ -736,7 +736,7 @@
 However, the module was careful to not change the numeric locale because various
 functions in Python's implementation required that the numeric locale remain set
 to the ``'C'`` locale.  Often this was because the code was using the C
-library's :cfunc:`atof` function.
+library's :c:func:`atof` function.
 
 Not setting the numeric locale caused trouble for extensions that used third-
 party C libraries, however, because they wouldn't have the correct locale set.
@@ -746,11 +746,11 @@
 The solution described in the PEP is to add three new functions to the Python
 API that perform ASCII-only conversions, ignoring the locale setting:
 
-* :cfunc:`PyOS_ascii_strtod(str, ptr)`  and :cfunc:`PyOS_ascii_atof(str, ptr)`
-  both convert a string to a C :ctype:`double`.
+* :c:func:`PyOS_ascii_strtod(str, ptr)`  and :c:func:`PyOS_ascii_atof(str, ptr)`
+  both convert a string to a C :c:type:`double`.
 
-* :cfunc:`PyOS_ascii_formatd(buffer, buf_len, format, d)` converts a
-  :ctype:`double` to an ASCII string.
+* :c:func:`PyOS_ascii_formatd(buffer, buf_len, format, d)` converts a
+  :c:type:`double` to an ASCII string.
 
 The code for these functions came from the GLib library
 (http://library.gnome.org/devel/glib/stable/), whose developers kindly
@@ -938,7 +938,7 @@
 * The machinery for growing and shrinking lists was optimized for speed and for
   space efficiency.  Appending and popping from lists now runs faster due to more
   efficient code paths and less frequent use of the underlying system
-  :cfunc:`realloc`.  List comprehensions also benefit.   :meth:`list.extend` was
+  :c:func:`realloc`.  List comprehensions also benefit.   :meth:`list.extend` was
   also optimized and no longer converts its argument into a temporary list before
   extending the base list.  (Contributed by Raymond Hettinger.)
 
@@ -1445,34 +1445,34 @@
 Some of the changes to Python's build process and to the C API are:
 
 * Three new convenience macros were added for common return values from
-  extension functions: :cmacro:`Py_RETURN_NONE`, :cmacro:`Py_RETURN_TRUE`, and
-  :cmacro:`Py_RETURN_FALSE`. (Contributed by Brett Cannon.)
+  extension functions: :c:macro:`Py_RETURN_NONE`, :c:macro:`Py_RETURN_TRUE`, and
+  :c:macro:`Py_RETURN_FALSE`. (Contributed by Brett Cannon.)
 
-* Another new macro, :cmacro:`Py_CLEAR(obj)`,  decreases the reference count of
+* Another new macro, :c:macro:`Py_CLEAR(obj)`,  decreases the reference count of
   *obj* and sets *obj* to the null pointer.  (Contributed by Jim Fulton.)
 
-* A new function, :cfunc:`PyTuple_Pack(N, obj1, obj2, ..., objN)`, constructs
+* A new function, :c:func:`PyTuple_Pack(N, obj1, obj2, ..., objN)`, constructs
   tuples from a variable length argument list of Python objects.  (Contributed by
   Raymond Hettinger.)
 
-* A new function, :cfunc:`PyDict_Contains(d, k)`, implements fast dictionary
+* A new function, :c:func:`PyDict_Contains(d, k)`, implements fast dictionary
   lookups without masking exceptions raised during the look-up process.
   (Contributed by Raymond Hettinger.)
 
-* The :cmacro:`Py_IS_NAN(X)` macro returns 1 if  its float or double argument
+* The :c:macro:`Py_IS_NAN(X)` macro returns 1 if  its float or double argument
   *X* is a NaN.   (Contributed by Tim Peters.)
 
 * C code can avoid unnecessary locking by using the new
-  :cfunc:`PyEval_ThreadsInitialized` function to tell  if any thread operations
+  :c:func:`PyEval_ThreadsInitialized` function to tell  if any thread operations
   have been performed.  If this function  returns false, no lock operations are
   needed. (Contributed by Nick Coghlan.)
 
-* A new function, :cfunc:`PyArg_VaParseTupleAndKeywords`, is the same as
-  :cfunc:`PyArg_ParseTupleAndKeywords` but takes a  :ctype:`va_list` instead of a
+* A new function, :c:func:`PyArg_VaParseTupleAndKeywords`, is the same as
+  :c:func:`PyArg_ParseTupleAndKeywords` but takes a  :c:type:`va_list` instead of a
   number of arguments. (Contributed by Greg Chapman.)
 
 * A new method flag, :const:`METH_COEXISTS`, allows a function defined in slots
-  to co-exist with a :ctype:`PyCFunction` having the same name.  This can halve
+  to co-exist with a :c:type:`PyCFunction` having the same name.  This can halve
   the access time for a method such as :meth:`set.__contains__`.  (Contributed by
   Raymond Hettinger.)
 
@@ -1486,8 +1486,8 @@
   though that processor architecture doesn't call that register "the TSC
   register".  (Contributed by Jeremy Hylton.)
 
-* The :ctype:`tracebackobject` type has been renamed to
-  :ctype:`PyTracebackObject`.
+* The :c:type:`tracebackobject` type has been renamed to
+  :c:type:`PyTracebackObject`.
 
 .. ======================================================================
 
diff --git a/Doc/whatsnew/2.5.rst b/Doc/whatsnew/2.5.rst
index 2825dd4..ff599c8 100644
--- a/Doc/whatsnew/2.5.rst
+++ b/Doc/whatsnew/2.5.rst
@@ -870,31 +870,31 @@
 PEP 353: Using ssize_t as the index type
 ========================================
 
-A wide-ranging change to Python's C API, using a new  :ctype:`Py_ssize_t` type
-definition instead of :ctype:`int`,  will permit the interpreter to handle more
+A wide-ranging change to Python's C API, using a new  :c:type:`Py_ssize_t` type
+definition instead of :c:type:`int`,  will permit the interpreter to handle more
 data on 64-bit platforms. This change doesn't affect Python's capacity on 32-bit
 platforms.
 
-Various pieces of the Python interpreter used C's :ctype:`int` type to store
+Various pieces of the Python interpreter used C's :c:type:`int` type to store
 sizes or counts; for example, the number of items in a list or tuple were stored
-in an :ctype:`int`.  The C compilers for most 64-bit platforms still define
-:ctype:`int` as a 32-bit type, so that meant that lists could only hold up to
+in an :c:type:`int`.  The C compilers for most 64-bit platforms still define
+:c:type:`int` as a 32-bit type, so that meant that lists could only hold up to
 ``2**31 - 1`` = 2147483647 items. (There are actually a few different
 programming models that 64-bit C compilers can use -- see
 http://www.unix.org/version2/whatsnew/lp64_wp.html for a discussion -- but the
-most commonly available model leaves :ctype:`int` as 32 bits.)
+most commonly available model leaves :c:type:`int` as 32 bits.)
 
 A limit of 2147483647 items doesn't really matter on a 32-bit platform because
 you'll run out of memory before hitting the length limit. Each list item
 requires space for a pointer, which is 4 bytes, plus space for a
-:ctype:`PyObject` representing the item.  2147483647\*4 is already more bytes
+:c:type:`PyObject` representing the item.  2147483647\*4 is already more bytes
 than a 32-bit address space can contain.
 
 It's possible to address that much memory on a 64-bit platform, however.  The
 pointers for a list that size would only require 16 GiB of space, so it's not
 unreasonable that Python programmers might construct lists that large.
 Therefore, the Python interpreter had to be changed to use some type other than
-:ctype:`int`, and this will be a 64-bit type on 64-bit platforms.  The change
+:c:type:`int`, and this will be a 64-bit type on 64-bit platforms.  The change
 will cause incompatibilities on 64-bit machines, so it was deemed worth making
 the transition now, while the number of 64-bit users is still relatively small.
 (In 5 or 10 years, we may *all* be on 64-bit machines, and the transition would
@@ -902,15 +902,15 @@
 
 This change most strongly affects authors of C extension modules.   Python
 strings and container types such as lists and tuples  now use
-:ctype:`Py_ssize_t` to store their size.   Functions such as
-:cfunc:`PyList_Size`  now return :ctype:`Py_ssize_t`.  Code in extension modules
-may therefore need to have some variables changed to :ctype:`Py_ssize_t`.
+:c:type:`Py_ssize_t` to store their size.   Functions such as
+:c:func:`PyList_Size`  now return :c:type:`Py_ssize_t`.  Code in extension modules
+may therefore need to have some variables changed to :c:type:`Py_ssize_t`.
 
-The :cfunc:`PyArg_ParseTuple` and :cfunc:`Py_BuildValue` functions have a new
-conversion code, ``n``, for :ctype:`Py_ssize_t`.   :cfunc:`PyArg_ParseTuple`'s
-``s#`` and ``t#`` still output :ctype:`int` by default, but you can define the
-macro  :cmacro:`PY_SSIZE_T_CLEAN` before including :file:`Python.h`  to make
-them return :ctype:`Py_ssize_t`.
+The :c:func:`PyArg_ParseTuple` and :c:func:`Py_BuildValue` functions have a new
+conversion code, ``n``, for :c:type:`Py_ssize_t`.   :c:func:`PyArg_ParseTuple`'s
+``s#`` and ``t#`` still output :c:type:`int` by default, but you can define the
+macro  :c:macro:`PY_SSIZE_T_CLEAN` before including :file:`Python.h`  to make
+them return :c:type:`Py_ssize_t`.
 
 :pep:`353` has a section on conversion guidelines that  extension authors should
 read to learn about supporting 64-bit platforms.
@@ -954,8 +954,8 @@
 :exc:`TypeError` if this requirement isn't met.
 
 A corresponding :attr:`nb_index` slot was added to the C-level
-:ctype:`PyNumberMethods` structure to let C extensions implement this protocol.
-:cfunc:`PyNumber_Index(obj)` can be used in extension code to call the
+:c:type:`PyNumberMethods` structure to let C extensions implement this protocol.
+:c:func:`PyNumber_Index(obj)` can be used in extension code to call the
 :meth:`__index__` function and retrieve its result.
 
 
@@ -1179,7 +1179,7 @@
   (Contributed by Bob Ippolito at the NeedForSpeed sprint.)
 
 * The :mod:`re` module got a 1 or 2% speedup by switching to  Python's allocator
-  functions instead of the system's  :cfunc:`malloc` and :cfunc:`free`.
+  functions instead of the system's  :c:func:`malloc` and :c:func:`free`.
   (Contributed by Jack Diederich at the NeedForSpeed sprint.)
 
 * The code generator's peephole optimizer now performs simple constant folding
@@ -1203,7 +1203,7 @@
   Sean Reifschneider at the NeedForSpeed sprint.)
 
 * Importing now caches the paths tried, recording whether  they exist or not so
-  that the interpreter makes fewer  :cfunc:`open` and :cfunc:`stat` calls on
+  that the interpreter makes fewer  :c:func:`open` and :c:func:`stat` calls on
   startup. (Contributed by Martin von Löwis and Georg Brandl.)
 
   .. Patch 921466
@@ -1568,7 +1568,7 @@
   reporting ``('CPython', 'trunk', '45313:45315')``.
 
   This information is also available to C extensions via the
-  :cfunc:`Py_GetBuildInfo` function that returns a  string of build information
+  :c:func:`Py_GetBuildInfo` function that returns a  string of build information
   like this: ``"trunk:45355:45356M, Apr 13 2006, 07:42:19"``.   (Contributed by
   Barry Warsaw.)
 
@@ -1690,7 +1690,7 @@
    result = libc.printf("Line of output\n")
 
 Type constructors for the various C types are provided: :func:`c_int`,
-:func:`c_float`, :func:`c_double`, :func:`c_char_p` (equivalent to :ctype:`char
+:func:`c_float`, :func:`c_double`, :func:`c_char_p` (equivalent to :c:type:`char
 \*`), and so forth.  Unlike Python's types, the C versions are all mutable; you
 can assign to their :attr:`value` attribute to change the wrapped value.  Python
 integers and strings will be automatically converted to the corresponding C
@@ -1720,7 +1720,7 @@
 ``ctypes.pythonapi`` object.  This object does *not*  release the global
 interpreter lock before calling a function, because the lock must be held when
 calling into the interpreter's code.   There's a :class:`py_object()` type
-constructor that will create a  :ctype:`PyObject \*` pointer.  A simple usage::
+constructor that will create a  :c:type:`PyObject \*` pointer.  A simple usage::
 
    import ctypes
 
@@ -2087,8 +2087,8 @@
   http://scan.coverity.com for the statistics.
 
 * The largest change to the C API came from :pep:`353`, which modifies the
-  interpreter to use a :ctype:`Py_ssize_t` type definition instead of
-  :ctype:`int`.  See the earlier section :ref:`pep-353` for a discussion of this
+  interpreter to use a :c:type:`Py_ssize_t` type definition instead of
+  :c:type:`int`.  See the earlier section :ref:`pep-353` for a discussion of this
   change.
 
 * The design of the bytecode compiler has changed a great deal,  no longer
@@ -2113,10 +2113,10 @@
   discusses the design.  To start learning about the code, read the definition of
   the various AST nodes in :file:`Parser/Python.asdl`.  A Python script reads this
   file and generates a set of C structure definitions in
-  :file:`Include/Python-ast.h`.  The :cfunc:`PyParser_ASTFromString` and
-  :cfunc:`PyParser_ASTFromFile`, defined in :file:`Include/pythonrun.h`, take
+  :file:`Include/Python-ast.h`.  The :c:func:`PyParser_ASTFromString` and
+  :c:func:`PyParser_ASTFromFile`, defined in :file:`Include/pythonrun.h`, take
   Python source as input and return the root of an AST representing the contents.
-  This AST can then be turned into a code object by :cfunc:`PyAST_Compile`.  For
+  This AST can then be turned into a code object by :c:func:`PyAST_Compile`.  For
   more information, read the source code, and then ask questions on python-dev.
 
   The AST code was developed under Jeremy Hylton's management, and implemented by
@@ -2138,55 +2138,55 @@
 
   Note that this change means extension modules must be more careful when
   allocating memory.  Python's API has many different functions for allocating
-  memory that are grouped into families.  For example, :cfunc:`PyMem_Malloc`,
-  :cfunc:`PyMem_Realloc`, and :cfunc:`PyMem_Free` are one family that allocates
-  raw memory, while :cfunc:`PyObject_Malloc`, :cfunc:`PyObject_Realloc`, and
-  :cfunc:`PyObject_Free` are another family that's supposed to be used for
+  memory that are grouped into families.  For example, :c:func:`PyMem_Malloc`,
+  :c:func:`PyMem_Realloc`, and :c:func:`PyMem_Free` are one family that allocates
+  raw memory, while :c:func:`PyObject_Malloc`, :c:func:`PyObject_Realloc`, and
+  :c:func:`PyObject_Free` are another family that's supposed to be used for
   creating Python objects.
 
   Previously these different families all reduced to the platform's
-  :cfunc:`malloc` and :cfunc:`free` functions.  This meant  it didn't matter if
-  you got things wrong and allocated memory with the :cfunc:`PyMem` function but
-  freed it with the :cfunc:`PyObject` function.  With 2.5's changes to obmalloc,
+  :c:func:`malloc` and :c:func:`free` functions.  This meant  it didn't matter if
+  you got things wrong and allocated memory with the :c:func:`PyMem` function but
+  freed it with the :c:func:`PyObject` function.  With 2.5's changes to obmalloc,
   these families now do different things and mismatches will probably result in a
   segfault.  You should carefully test your C extension modules with Python 2.5.
 
-* The built-in set types now have an official C API.  Call :cfunc:`PySet_New`
-  and :cfunc:`PyFrozenSet_New` to create a new set, :cfunc:`PySet_Add` and
-  :cfunc:`PySet_Discard` to add and remove elements, and :cfunc:`PySet_Contains`
-  and :cfunc:`PySet_Size` to examine the set's state. (Contributed by Raymond
+* The built-in set types now have an official C API.  Call :c:func:`PySet_New`
+  and :c:func:`PyFrozenSet_New` to create a new set, :c:func:`PySet_Add` and
+  :c:func:`PySet_Discard` to add and remove elements, and :c:func:`PySet_Contains`
+  and :c:func:`PySet_Size` to examine the set's state. (Contributed by Raymond
   Hettinger.)
 
 * C code can now obtain information about the exact revision of the Python
-  interpreter by calling the  :cfunc:`Py_GetBuildInfo` function that returns a
+  interpreter by calling the  :c:func:`Py_GetBuildInfo` function that returns a
   string of build information like this: ``"trunk:45355:45356M, Apr 13 2006,
   07:42:19"``.   (Contributed by Barry Warsaw.)
 
 * Two new macros can be used to indicate C functions that are local to the
   current file so that a faster calling convention can be used.
-  :cfunc:`Py_LOCAL(type)` declares the function as returning a value of the
+  :c:func:`Py_LOCAL(type)` declares the function as returning a value of the
   specified *type* and uses a fast-calling qualifier.
-  :cfunc:`Py_LOCAL_INLINE(type)` does the same thing and also requests the
-  function be inlined.  If :cfunc:`PY_LOCAL_AGGRESSIVE` is defined before
+  :c:func:`Py_LOCAL_INLINE(type)` does the same thing and also requests the
+  function be inlined.  If :c:func:`PY_LOCAL_AGGRESSIVE` is defined before
   :file:`python.h` is included, a set of more aggressive optimizations are enabled
   for the module; you should benchmark the results to find out if these
   optimizations actually make the code faster.  (Contributed by Fredrik Lundh at
   the NeedForSpeed sprint.)
 
-* :cfunc:`PyErr_NewException(name, base, dict)` can now accept a tuple of base
+* :c:func:`PyErr_NewException(name, base, dict)` can now accept a tuple of base
   classes as its *base* argument.  (Contributed by Georg Brandl.)
 
-* The :cfunc:`PyErr_Warn` function for issuing warnings is now deprecated in
-  favour of :cfunc:`PyErr_WarnEx(category, message, stacklevel)` which lets you
+* The :c:func:`PyErr_Warn` function for issuing warnings is now deprecated in
+  favour of :c:func:`PyErr_WarnEx(category, message, stacklevel)` which lets you
   specify the number of stack frames separating this function and the caller.  A
-  *stacklevel* of 1 is the function calling :cfunc:`PyErr_WarnEx`, 2 is the
+  *stacklevel* of 1 is the function calling :c:func:`PyErr_WarnEx`, 2 is the
   function above that, and so forth.  (Added by Neal Norwitz.)
 
 * The CPython interpreter is still written in C, but  the code can now be
   compiled with a C++ compiler without errors.   (Implemented by Anthony Baxter,
   Martin von Löwis, Skip Montanaro.)
 
-* The :cfunc:`PyRange_New` function was removed.  It was never documented, never
+* The :c:func:`PyRange_New` function was removed.  It was never documented, never
   used in the core code, and had dangerously lax error checking.  In the unlikely
   case that your extensions were using it, you can replace it by something like
   the following::
@@ -2203,7 +2203,7 @@
 ---------------------
 
 * MacOS X (10.3 and higher): dynamic loading of modules now uses the
-  :cfunc:`dlopen` function instead of MacOS-specific functions.
+  :c:func:`dlopen` function instead of MacOS-specific functions.
 
 * MacOS X: an :option:`--enable-universalsdk` switch was added to the
   :program:`configure` script that compiles the interpreter as a universal binary
@@ -2259,15 +2259,15 @@
   Setting  :attr:`rpc_paths` to ``None`` or an empty tuple disables  this path
   checking.
 
-* C API: Many functions now use :ctype:`Py_ssize_t`  instead of :ctype:`int` to
+* C API: Many functions now use :c:type:`Py_ssize_t`  instead of :c:type:`int` to
   allow processing more data on 64-bit machines.  Extension code may need to make
   the same change to avoid warnings and to support 64-bit machines.  See the
   earlier section :ref:`pep-353` for a discussion of this change.
 
 * C API:  The obmalloc changes mean that  you must be careful to not mix usage
-  of the :cfunc:`PyMem_\*` and :cfunc:`PyObject_\*` families of functions. Memory
-  allocated with  one family's :cfunc:`\*_Malloc` must be  freed with the
-  corresponding family's :cfunc:`\*_Free` function.
+  of the :c:func:`PyMem_\*` and :c:func:`PyObject_\*` families of functions. Memory
+  allocated with  one family's :c:func:`\*_Malloc` must be  freed with the
+  corresponding family's :c:func:`\*_Free` function.
 
 .. ======================================================================
 
diff --git a/Doc/whatsnew/2.6.rst b/Doc/whatsnew/2.6.rst
index 5cca82c..1a64109 100644
--- a/Doc/whatsnew/2.6.rst
+++ b/Doc/whatsnew/2.6.rst
@@ -121,7 +121,7 @@
 with this switch to see how much work will be necessary to port
 code to 3.0.  The value of this switch is available
 to Python code as the boolean variable :data:`sys.py3kwarning`,
-and to C extension code as :cdata:`Py_Py3kWarningFlag`.
+and to C extension code as :c:data:`Py_Py3kWarningFlag`.
 
 .. seealso::
 
@@ -975,10 +975,10 @@
     print len(s)               # 12 Unicode characters
 
 At the C level, Python 3.0 will rename the existing 8-bit
-string type, called :ctype:`PyStringObject` in Python 2.x,
-to :ctype:`PyBytesObject`.  Python 2.6 uses ``#define``
-to support using the names :cfunc:`PyBytesObject`,
-:cfunc:`PyBytes_Check`, :cfunc:`PyBytes_FromStringAndSize`,
+string type, called :c:type:`PyStringObject` in Python 2.x,
+to :c:type:`PyBytesObject`.  Python 2.6 uses ``#define``
+to support using the names :c:func:`PyBytesObject`,
+:c:func:`PyBytes_Check`, :c:func:`PyBytes_FromStringAndSize`,
 and all the other functions and macros used with strings.
 
 Instances of the :class:`bytes` type are immutable just
@@ -1010,8 +1010,8 @@
     bytearray(b'ABCde')
 
 There's also a corresponding C API, with
-:cfunc:`PyByteArray_FromObject`,
-:cfunc:`PyByteArray_FromStringAndSize`,
+:c:func:`PyByteArray_FromObject`,
+:c:func:`PyByteArray_FromStringAndSize`,
 and various other functions.
 
 .. seealso::
@@ -1130,7 +1130,7 @@
 
 .. XXX PyObject_GetBuffer not documented in c-api
 
-The *flags* argument to :cfunc:`PyObject_GetBuffer` specifies
+The *flags* argument to :c:func:`PyObject_GetBuffer` specifies
 constraints upon the memory returned.  Some examples are:
 
  * :const:`PyBUF_WRITABLE` indicates that the memory must be writable.
@@ -1141,7 +1141,7 @@
    requests a C-contiguous (last dimension varies the fastest) or
    Fortran-contiguous (first dimension varies the fastest) array layout.
 
-Two new argument codes for :cfunc:`PyArg_ParseTuple`,
+Two new argument codes for :c:func:`PyArg_ParseTuple`,
 ``s*`` and ``z*``, return locked buffer objects for a parameter.
 
 .. seealso::
@@ -1635,7 +1635,7 @@
   :meth:`__hash__` method inherited from a parent class, so
   assigning ``None`` was implemented as an override.  At the
   C level, extensions can set ``tp_hash`` to
-  :cfunc:`PyObject_HashNotImplemented`.
+  :c:func:`PyObject_HashNotImplemented`.
   (Fixed by Nick Coghlan and Amaury Forgeot d'Arc; :issue:`2235`.)
 
 * The :exc:`GeneratorExit` exception now subclasses
@@ -1705,7 +1705,7 @@
   By default, this change is only applied to types that are included with
   the Python core.  Extension modules may not necessarily be compatible with
   this cache,
-  so they must explicitly add :cmacro:`Py_TPFLAGS_HAVE_VERSION_TAG`
+  so they must explicitly add :c:macro:`Py_TPFLAGS_HAVE_VERSION_TAG`
   to the module's ``tp_flags`` field to enable the method cache.
   (To be compatible with the method cache, the extension module's code
   must not directly access and modify the ``tp_dict`` member of
@@ -2284,7 +2284,7 @@
   (Contributed by Raymond Hettinger; :issue:`1861`.)
 
 * The :mod:`select` module now has wrapper functions
-  for the Linux :cfunc:`epoll` and BSD :cfunc:`kqueue` system calls.
+  for the Linux :c:func:`epoll` and BSD :c:func:`kqueue` system calls.
   :meth:`modify` method was added to the existing :class:`poll`
   objects; ``pollobj.modify(fd, eventmask)`` takes a file descriptor
   or file object and an event mask, modifying the recorded event mask
@@ -2317,13 +2317,13 @@
   Calling ``signal.set_wakeup_fd(fd)`` sets a file descriptor
   to be used; when a signal is received, a byte is written to that
   file descriptor.  There's also a C-level function,
-  :cfunc:`PySignal_SetWakeupFd`, for setting the descriptor.
+  :c:func:`PySignal_SetWakeupFd`, for setting the descriptor.
 
   Event loops will use this by opening a pipe to create two descriptors,
   one for reading and one for writing.  The writable descriptor
   will be passed to :func:`set_wakeup_fd`, and the readable descriptor
   will be added to the list of descriptors monitored by the event loop via
-  :cfunc:`select` or :cfunc:`poll`.
+  :c:func:`select` or :c:func:`poll`.
   On receiving a signal, a byte will be written and the main event loop
   will be woken up, avoiding the need to poll.
 
@@ -2384,7 +2384,7 @@
   has been updated from version 2.3.2 in Python 2.5 to
   version 2.4.1.
 
-* The :mod:`struct` module now supports the C99 :ctype:`_Bool` type,
+* The :mod:`struct` module now supports the C99 :c:type:`_Bool` type,
   using the format character ``'?'``.
   (Contributed by David Remahl.)
 
@@ -2392,7 +2392,7 @@
   now have :meth:`terminate`, :meth:`kill`, and :meth:`send_signal` methods.
   On Windows, :meth:`send_signal` only supports the :const:`SIGTERM`
   signal, and all these methods are aliases for the Win32 API function
-  :cfunc:`TerminateProcess`.
+  :c:func:`TerminateProcess`.
   (Contributed by Christian Heimes.)
 
 * A new variable in the :mod:`sys` module, :attr:`float_info`, is an
@@ -2977,7 +2977,7 @@
 
 * Python now must be compiled with C89 compilers (after 19
   years!).  This means that the Python source tree has dropped its
-  own implementations of :cfunc:`memmove` and :cfunc:`strerror`, which
+  own implementations of :c:func:`memmove` and :c:func:`strerror`, which
   are in the C89 standard library.
 
 * Python 2.6 can be built with Microsoft Visual Studio 2008 (version
@@ -2999,7 +2999,7 @@
 
 * The new buffer interface, previously described in
   `the PEP 3118 section <#pep-3118-revised-buffer-protocol>`__,
-  adds :cfunc:`PyObject_GetBuffer` and :cfunc:`PyBuffer_Release`,
+  adds :c:func:`PyObject_GetBuffer` and :c:func:`PyBuffer_Release`,
   as well as a few other functions.
 
 * Python's use of the C stdio library is now thread-safe, or at least
@@ -3007,27 +3007,27 @@
   bug occurred if one thread closed a file object while another thread
   was reading from or writing to the object.  In 2.6 file objects
   have a reference count, manipulated by the
-  :cfunc:`PyFile_IncUseCount` and :cfunc:`PyFile_DecUseCount`
+  :c:func:`PyFile_IncUseCount` and :c:func:`PyFile_DecUseCount`
   functions.  File objects can't be closed unless the reference count
-  is zero.  :cfunc:`PyFile_IncUseCount` should be called while the GIL
+  is zero.  :c:func:`PyFile_IncUseCount` should be called while the GIL
   is still held, before carrying out an I/O operation using the
-  ``FILE *`` pointer, and :cfunc:`PyFile_DecUseCount` should be called
+  ``FILE *`` pointer, and :c:func:`PyFile_DecUseCount` should be called
   immediately after the GIL is re-acquired.
   (Contributed by Antoine Pitrou and Gregory P. Smith.)
 
 * Importing modules simultaneously in two different threads no longer
   deadlocks; it will now raise an :exc:`ImportError`.  A new API
-  function, :cfunc:`PyImport_ImportModuleNoBlock`, will look for a
+  function, :c:func:`PyImport_ImportModuleNoBlock`, will look for a
   module in ``sys.modules`` first, then try to import it after
   acquiring an import lock.  If the import lock is held by another
   thread, an :exc:`ImportError` is raised.
   (Contributed by Christian Heimes.)
 
 * Several functions return information about the platform's
-  floating-point support.  :cfunc:`PyFloat_GetMax` returns
+  floating-point support.  :c:func:`PyFloat_GetMax` returns
   the maximum representable floating point value,
-  and :cfunc:`PyFloat_GetMin` returns the minimum
-  positive value.  :cfunc:`PyFloat_GetInfo` returns an object
+  and :c:func:`PyFloat_GetMin` returns the minimum
+  positive value.  :c:func:`PyFloat_GetInfo` returns an object
   containing more information from the :file:`float.h` file, such as
   ``"mant_dig"`` (number of digits in the mantissa), ``"epsilon"``
   (smallest difference between 1.0 and the next largest value
@@ -3035,7 +3035,7 @@
   (Contributed by Christian Heimes; :issue:`1534`.)
 
 * C functions and methods that use
-  :cfunc:`PyComplex_AsCComplex` will now accept arguments that
+  :c:func:`PyComplex_AsCComplex` will now accept arguments that
   have a :meth:`__complex__` method.  In particular, the functions in the
   :mod:`cmath` module will now accept objects with this method.
   This is a backport of a Python 3.0 change.
@@ -3049,15 +3049,15 @@
 * Many C extensions define their own little macro for adding
   integers and strings to the module's dictionary in the
   ``init*`` function.  Python 2.6 finally defines standard macros
-  for adding values to a module, :cmacro:`PyModule_AddStringMacro`
-  and :cmacro:`PyModule_AddIntMacro()`.  (Contributed by
+  for adding values to a module, :c:macro:`PyModule_AddStringMacro`
+  and :c:macro:`PyModule_AddIntMacro()`.  (Contributed by
   Christian Heimes.)
 
 * Some macros were renamed in both 3.0 and 2.6 to make it clearer that
   they are macros,
-  not functions.  :cmacro:`Py_Size()` became :cmacro:`Py_SIZE()`,
-  :cmacro:`Py_Type()` became :cmacro:`Py_TYPE()`, and
-  :cmacro:`Py_Refcnt()` became :cmacro:`Py_REFCNT()`.
+  not functions.  :c:macro:`Py_Size()` became :c:macro:`Py_SIZE()`,
+  :c:macro:`Py_Type()` became :c:macro:`Py_TYPE()`, and
+  :c:macro:`Py_Refcnt()` became :c:macro:`Py_REFCNT()`.
   The mixed-case macros are still available
   in Python 2.6 for backward compatibility.
   (:issue:`1629`)
@@ -3115,7 +3115,7 @@
 
 * The :mod:`socket` module's socket objects now have an
   :meth:`ioctl` method that provides a limited interface to the
-  :cfunc:`WSAIoctl` system interface.
+  :c:func:`WSAIoctl` system interface.
 
 * The :mod:`_winreg` module now has a function,
   :func:`ExpandEnvironmentStrings`,
@@ -3261,13 +3261,13 @@
   the implementation now explicitly checks for this case and raises
   an :exc:`ImportError`.
 
-* C API: the :cfunc:`PyImport_Import` and :cfunc:`PyImport_ImportModule`
+* C API: the :c:func:`PyImport_Import` and :c:func:`PyImport_ImportModule`
   functions now default to absolute imports, not relative imports.
   This will affect C extensions that import other modules.
 
 * C API: extension data types that shouldn't be hashable
   should define their ``tp_hash`` slot to
-  :cfunc:`PyObject_HashNotImplemented`.
+  :c:func:`PyObject_HashNotImplemented`.
 
 * The :mod:`socket` module exception :exc:`socket.error` now inherits
   from :exc:`IOError`.  Previously it wasn't a subclass of
diff --git a/Doc/whatsnew/2.7.rst b/Doc/whatsnew/2.7.rst
index 43b859d..560e2f7 100644
--- a/Doc/whatsnew/2.7.rst
+++ b/Doc/whatsnew/2.7.rst
@@ -147,8 +147,8 @@
   ``float(repr(x))`` recovers ``x``.
 * Float-to-string and string-to-float conversions are correctly rounded.
   The :func:`round` function is also now correctly rounded.
-* The :ctype:`PyCapsule` type, used to provide a C API for extension modules.
-* The :cfunc:`PyLong_AsLongAndOverflow` C API function.
+* The :c:type:`PyCapsule` type, used to provide a C API for extension modules.
+* The :c:func:`PyLong_AsLongAndOverflow` C API function.
 
 Other new Python3-mode warnings include:
 
@@ -311,7 +311,7 @@
 This means Python now supports three different modules for parsing
 command-line arguments: :mod:`getopt`, :mod:`optparse`, and
 :mod:`argparse`.  The :mod:`getopt` module closely resembles the C
-library's :cfunc:`getopt` function, so it remains useful if you're writing a
+library's :c:func:`getopt` function, so it remains useful if you're writing a
 Python prototype that will eventually be rewritten in C.
 :mod:`optparse` becomes redundant, but there are no plans to remove it
 because there are many scripts still using it, and there's no
@@ -1478,7 +1478,7 @@
 * The :mod:`ssl` module's :class:`~ssl.SSLSocket` objects now support the
   buffer API, which fixed a test suite failure (fix by Antoine Pitrou;
   :issue:`7133`) and automatically set
-  OpenSSL's :cmacro:`SSL_MODE_AUTO_RETRY`, which will prevent an error
+  OpenSSL's :c:macro:`SSL_MODE_AUTO_RETRY`, which will prevent an error
   code being returned from :meth:`recv` operations that trigger an SSL
   renegotiation (fix by Antoine Pitrou; :issue:`8222`).
 
@@ -2050,49 +2050,49 @@
   debugged doesn't hold the GIL; the macro now acquires it before printing.
   (Contributed by Victor Stinner; :issue:`3632`.)
 
-* :cfunc:`Py_AddPendingCall` is now thread-safe, letting any
+* :c:func:`Py_AddPendingCall` is now thread-safe, letting any
   worker thread submit notifications to the main Python thread.  This
   is particularly useful for asynchronous IO operations.
   (Contributed by Kristján Valur Jónsson; :issue:`4293`.)
 
-* New function: :cfunc:`PyCode_NewEmpty` creates an empty code object;
+* New function: :c:func:`PyCode_NewEmpty` creates an empty code object;
   only the filename, function name, and first line number are required.
   This is useful for extension modules that are attempting to
   construct a more useful traceback stack.  Previously such
-  extensions needed to call :cfunc:`PyCode_New`, which had many
+  extensions needed to call :c:func:`PyCode_New`, which had many
   more arguments.  (Added by Jeffrey Yasskin.)
 
-* New function: :cfunc:`PyErr_NewExceptionWithDoc` creates a new
-  exception class, just as the existing :cfunc:`PyErr_NewException` does,
+* New function: :c:func:`PyErr_NewExceptionWithDoc` creates a new
+  exception class, just as the existing :c:func:`PyErr_NewException` does,
   but takes an extra ``char *`` argument containing the docstring for the
   new exception class.  (Added by 'lekma' on the Python bug tracker;
   :issue:`7033`.)
 
-* New function: :cfunc:`PyFrame_GetLineNumber` takes a frame object
+* New function: :c:func:`PyFrame_GetLineNumber` takes a frame object
   and returns the line number that the frame is currently executing.
   Previously code would need to get the index of the bytecode
   instruction currently executing, and then look up the line number
   corresponding to that address.  (Added by Jeffrey Yasskin.)
 
-* New functions: :cfunc:`PyLong_AsLongAndOverflow` and
-  :cfunc:`PyLong_AsLongLongAndOverflow`  approximates a Python long
-  integer as a C :ctype:`long` or :ctype:`long long`.
+* New functions: :c:func:`PyLong_AsLongAndOverflow` and
+  :c:func:`PyLong_AsLongLongAndOverflow`  approximates a Python long
+  integer as a C :c:type:`long` or :c:type:`long long`.
   If the number is too large to fit into
   the output type, an *overflow* flag is set and returned to the caller.
   (Contributed by Case Van Horsen; :issue:`7528` and :issue:`7767`.)
 
 * New function: stemming from the rewrite of string-to-float conversion,
-  a new :cfunc:`PyOS_string_to_double` function was added.  The old
-  :cfunc:`PyOS_ascii_strtod` and :cfunc:`PyOS_ascii_atof` functions
+  a new :c:func:`PyOS_string_to_double` function was added.  The old
+  :c:func:`PyOS_ascii_strtod` and :c:func:`PyOS_ascii_atof` functions
   are now deprecated.
 
-* New function: :cfunc:`PySys_SetArgvEx` sets the value of
+* New function: :c:func:`PySys_SetArgvEx` sets the value of
   ``sys.argv`` and can optionally update ``sys.path`` to include the
   directory containing the script named by ``sys.argv[0]`` depending
   on the value of an *updatepath* parameter.
 
   This function was added to close a security hole for applications
-  that embed Python.  The old function, :cfunc:`PySys_SetArgv`, would
+  that embed Python.  The old function, :c:func:`PySys_SetArgv`, would
   always update ``sys.path``, and sometimes it would add the current
   directory.  This meant that, if you ran an application embedding
   Python in a directory controlled by someone else, attackers could
@@ -2100,8 +2100,8 @@
   :file:`os.py`) that your application would then import and run.
 
   If you maintain a C/C++ application that embeds Python, check
-  whether you're calling :cfunc:`PySys_SetArgv` and carefully consider
-  whether the application should be using :cfunc:`PySys_SetArgvEx`
+  whether you're calling :c:func:`PySys_SetArgv` and carefully consider
+  whether the application should be using :c:func:`PySys_SetArgvEx`
   with *updatepath* set to false.
 
   Security issue reported as `CVE-2008-5983
@@ -2109,14 +2109,14 @@
   discussed in :issue:`5753`, and fixed by Antoine Pitrou.
 
 * New macros: the Python header files now define the following macros:
-  :cmacro:`Py_ISALNUM`,
-  :cmacro:`Py_ISALPHA`,
-  :cmacro:`Py_ISDIGIT`,
-  :cmacro:`Py_ISLOWER`,
-  :cmacro:`Py_ISSPACE`,
-  :cmacro:`Py_ISUPPER`,
-  :cmacro:`Py_ISXDIGIT`,
-  :cmacro:`Py_TOLOWER`, and :cmacro:`Py_TOUPPER`.
+  :c:macro:`Py_ISALNUM`,
+  :c:macro:`Py_ISALPHA`,
+  :c:macro:`Py_ISDIGIT`,
+  :c:macro:`Py_ISLOWER`,
+  :c:macro:`Py_ISSPACE`,
+  :c:macro:`Py_ISUPPER`,
+  :c:macro:`Py_ISXDIGIT`,
+  :c:macro:`Py_TOLOWER`, and :c:macro:`Py_TOUPPER`.
   All of these functions are analogous to the C
   standard macros for classifying characters, but ignore the current
   locale setting, because in
@@ -2126,15 +2126,15 @@
 
   .. XXX these macros don't seem to be described in the c-api docs.
 
-* Removed function: :cmacro:`PyEval_CallObject` is now only available
+* Removed function: :c:macro:`PyEval_CallObject` is now only available
   as a macro.  A function version was being kept around to preserve
   ABI linking compatibility, but that was in 1997; it can certainly be
   deleted by now.  (Removed by Antoine Pitrou; :issue:`8276`.)
 
-* New format codes: the :cfunc:`PyFormat_FromString`,
-  :cfunc:`PyFormat_FromStringV`, and :cfunc:`PyErr_Format` functions now
+* New format codes: the :c:func:`PyFormat_FromString`,
+  :c:func:`PyFormat_FromStringV`, and :c:func:`PyErr_Format` functions now
   accept ``%lld`` and ``%llu`` format codes for displaying
-  C's :ctype:`long long` types.
+  C's :c:type:`long long` types.
   (Contributed by Mark Dickinson; :issue:`7228`.)
 
 * The complicated interaction between threads and process forking has
@@ -2150,17 +2150,17 @@
   Python 2.7 acquires the import lock before performing an
   :func:`os.fork`, and will also clean up any locks created using the
   :mod:`threading` module.  C extension modules that have internal
-  locks, or that call :cfunc:`fork()` themselves, will not benefit
+  locks, or that call :c:func:`fork()` themselves, will not benefit
   from this clean-up.
 
   (Fixed by Thomas Wouters; :issue:`1590864`.)
 
-* The :cfunc:`Py_Finalize` function now calls the internal
+* The :c:func:`Py_Finalize` function now calls the internal
   :func:`threading._shutdown` function; this prevents some exceptions from
   being raised when an interpreter shuts down.
   (Patch by Adam Olsen; :issue:`1722344`.)
 
-* When using the :ctype:`PyMemberDef` structure to define attributes
+* When using the :c:type:`PyMemberDef` structure to define attributes
   of a type, Python will no longer let you try to delete or set a
   :const:`T_STRING_INPLACE` attribute.
 
@@ -2187,7 +2187,7 @@
   :issue:`6491`.)
 
 * The :program:`configure` script now checks for floating-point rounding bugs
-  on certain 32-bit Intel chips and defines a :cmacro:`X87_DOUBLE_ROUNDING`
+  on certain 32-bit Intel chips and defines a :c:macro:`X87_DOUBLE_ROUNDING`
   preprocessor definition.  No code currently uses this definition,
   but it's available if anyone wishes to use it.
   (Added by Mark Dickinson; :issue:`2937`.)
@@ -2208,7 +2208,7 @@
 Capsules
 -------------------
 
-Python 3.1 adds a new C datatype, :ctype:`PyCapsule`, for providing a
+Python 3.1 adds a new C datatype, :c:type:`PyCapsule`, for providing a
 C API to an extension module.  A capsule is essentially the holder of
 a C ``void *`` pointer, and is made available as a module attribute; for
 example, the :mod:`socket` module's API is exposed as ``socket.CAPI``,
@@ -2218,10 +2218,10 @@
 to an array of pointers to the module's various API functions.
 
 There is an existing data type already used for this,
-:ctype:`PyCObject`, but it doesn't provide type safety.  Evil code
+:c:type:`PyCObject`, but it doesn't provide type safety.  Evil code
 written in pure Python could cause a segmentation fault by taking a
-:ctype:`PyCObject` from module A and somehow substituting it for the
-:ctype:`PyCObject` in module B.   Capsules know their own name,
+:c:type:`PyCObject` from module A and somehow substituting it for the
+:c:type:`PyCObject` in module B.   Capsules know their own name,
 and getting the pointer requires providing the name::
 
    void *vtable;
@@ -2234,15 +2234,15 @@
    vtable = PyCapsule_GetPointer(capsule, "mymodule.CAPI");
 
 You are assured that ``vtable`` points to whatever you're expecting.
-If a different capsule was passed in, :cfunc:`PyCapsule_IsValid` would
+If a different capsule was passed in, :c:func:`PyCapsule_IsValid` would
 detect the mismatched name and return false.  Refer to
 :ref:`using-capsules` for more information on using these objects.
 
 Python 2.7 now uses capsules internally to provide various
-extension-module APIs, but the :cfunc:`PyCObject_AsVoidPtr` was
+extension-module APIs, but the :c:func:`PyCObject_AsVoidPtr` was
 modified to handle capsules, preserving compile-time compatibility
-with the :ctype:`CObject` interface.  Use of
-:cfunc:`PyCObject_AsVoidPtr` will signal a
+with the :c:type:`CObject` interface.  Use of
+:c:func:`PyCObject_AsVoidPtr` will signal a
 :exc:`PendingDeprecationWarning`, which is silent by default.
 
 Implemented in Python 3.1 and backported to 2.7 by Larry Hastings;
@@ -2269,7 +2269,7 @@
   were also tested and documented.
   (Implemented by Brian Curtin: :issue:`7347`.)
 
-* The new :cfunc:`_beginthreadex` API is used to start threads, and
+* The new :c:func:`_beginthreadex` API is used to start threads, and
   the native thread-local storage functions are now used.
   (Contributed by Kristján Valur Jónsson; :issue:`3582`.)
 
@@ -2277,7 +2277,7 @@
   can be the constants :const:`CTRL_C_EVENT`,
   :const:`CTRL_BREAK_EVENT`, or any integer.  The first two constants
   will send Control-C and Control-Break keystroke events to
-  subprocesses; any other value will use the :cfunc:`TerminateProcess`
+  subprocesses; any other value will use the :c:func:`TerminateProcess`
   API.  (Contributed by Miki Tebeka; :issue:`1220212`.)
 
 * The :func:`os.listdir` function now correctly fails
@@ -2450,17 +2450,17 @@
   family of functions will now raise a :exc:`TypeError` exception
   instead of triggering a :exc:`DeprecationWarning` (:issue:`5080`).
 
-* Use the new :cfunc:`PyOS_string_to_double` function instead of the old
-  :cfunc:`PyOS_ascii_strtod` and :cfunc:`PyOS_ascii_atof` functions,
+* Use the new :c:func:`PyOS_string_to_double` function instead of the old
+  :c:func:`PyOS_ascii_strtod` and :c:func:`PyOS_ascii_atof` functions,
   which are now deprecated.
 
 For applications that embed Python:
 
-* The :cfunc:`PySys_SetArgvEx` function was added, letting
+* The :c:func:`PySys_SetArgvEx` function was added, letting
   applications close a security hole when the existing
-  :cfunc:`PySys_SetArgv` function was used.  Check whether you're
-  calling :cfunc:`PySys_SetArgv` and carefully consider whether the
-  application should be using :cfunc:`PySys_SetArgvEx` with
+  :c:func:`PySys_SetArgv` function was used.  Check whether you're
+  calling :c:func:`PySys_SetArgv` and carefully consider whether the
+  application should be using :c:func:`PySys_SetArgvEx` with
   *updatepath* set to false.
 
 .. ======================================================================