Marked keystrokes with the :kbd: role.
Fixed the case of the "Ctrl-" prefixes.
diff --git a/Doc/faq/extending.rst b/Doc/faq/extending.rst
index ccd8b28..ade88ae 100644
--- a/Doc/faq/extending.rst
+++ b/Doc/faq/extending.rst
@@ -345,7 +345,7 @@
{
line = readline (prompt);
- if (NULL == line) /* CTRL-D pressed */
+ if (NULL == line) /* Ctrl-D pressed */
{
done = 1;
}
diff --git a/Doc/faq/windows.rst b/Doc/faq/windows.rst
index 19bd120..27299c8 100644
--- a/Doc/faq/windows.rst
+++ b/Doc/faq/windows.rst
@@ -77,14 +77,14 @@
'HelloHelloHello'
Many people use the interactive mode as a convenient yet highly programmable
-calculator. When you want to end your interactive Python session, hold the Ctrl
-key down while you enter a Z, then hit the "Enter" key to get back to your
+calculator. When you want to end your interactive Python session, hold the :kbd:`Ctrl`
+key down while you enter a :kbd:`Z`, then hit the ":kbd:`Enter`" key to get back to your
Windows command prompt.
You may also find that you have a Start-menu entry such as :menuselection:`Start
--> Programs --> Python 2.7 --> Python (command line)` that results in you
seeing the ``>>>`` prompt in a new window. If so, the window will disappear
-after you enter the Ctrl-Z character; Windows is running a single "python"
+after you enter the :kbd:`Ctrl-Z` character; Windows is running a single "python"
command in the window, and closes it when you terminate the interpreter.
If the ``python`` command, instead of displaying the interpreter prompt ``>>>``,
@@ -127,8 +127,8 @@
c:\Python27\python
-starts up the interpreter as above (and don't forget you'll need a "CTRL-Z" and
-an "Enter" to get out of it). Once you have verified the directory, you can
+starts up the interpreter as above (and don't forget you'll need a ":kbd:`Ctrl-Z`" and
+an ":kbd:`Enter`" to get out of it). Once you have verified the directory, you can
add it to the system path to make it easier to start Python by just running
the ``python`` command. This is currently an option in the installer as of
CPython 2.7.
@@ -321,7 +321,7 @@
return (0 != kernel32.TerminateProcess(handle, 0))
In 2.7 and 3.2, :func:`os.kill` is implemented similar to the above function,
-with the additional feature of being able to send CTRL+C and CTRL+BREAK
+with the additional feature of being able to send :kbd:`Ctrl+C` and :kbd:`Ctrl+Break`
to console subprocesses which are designed to handle those signals. See
:func:`os.kill` for further details.
diff --git a/Doc/library/idle.rst b/Doc/library/idle.rst
index e64f683..ecc7115 100644
--- a/Doc/library/idle.rst
+++ b/Doc/library/idle.rst
@@ -330,8 +330,8 @@
Editing and navigation
----------------------
-In this section, 'C' refers to the Control key on Windows and Unix and
-the Command key on Mac OSX.
+In this section, 'C' refers to the :kbd:`Control` key on Windows and Unix and
+the :kbd:`Command` key on Mac OSX.
* :kbd:`Backspace` deletes to the left; :kbd:`Del` deletes to the right
diff --git a/Doc/library/multiprocessing.rst b/Doc/library/multiprocessing.rst
index 021e3c8..e777937 100644
--- a/Doc/library/multiprocessing.rst
+++ b/Doc/library/multiprocessing.rst
@@ -957,7 +957,7 @@
.. note::
- If the SIGINT signal generated by Ctrl-C arrives while the main thread is
+ If the SIGINT signal generated by :kbd:`Ctrl-C` arrives while the main thread is
blocked by a call to :meth:`BoundedSemaphore.acquire`, :meth:`Lock.acquire`,
:meth:`RLock.acquire`, :meth:`Semaphore.acquire`, :meth:`Condition.acquire`
or :meth:`Condition.wait` then the call will be immediately interrupted and
diff --git a/Doc/library/signal.rst b/Doc/library/signal.rst
index 29d56fc..fe7983b 100644
--- a/Doc/library/signal.rst
+++ b/Doc/library/signal.rst
@@ -77,7 +77,7 @@
.. data:: CTRL_C_EVENT
- The signal corresponding to the CTRL+C keystroke event. This signal can
+ The signal corresponding to the :kbd:`Ctrl+C` keystroke event. This signal can
only be used with :func:`os.kill`.
Availability: Windows.
@@ -87,7 +87,7 @@
.. data:: CTRL_BREAK_EVENT
- The signal corresponding to the CTRL+BREAK keystroke event. This signal can
+ The signal corresponding to the :kbd:`Ctrl+Break` keystroke event. This signal can
only be used with :func:`os.kill`.
Availability: Windows.
diff --git a/Doc/library/ttk.rst b/Doc/library/ttk.rst
index 6cab3e0..ad4aa92 100644
--- a/Doc/library/ttk.rst
+++ b/Doc/library/ttk.rst
@@ -544,9 +544,9 @@
This will extend the bindings for the toplevel window containing the
notebook as follows:
- * Control-Tab: selects the tab following the currently selected one.
- * Shift-Control-Tab: selects the tab preceding the currently selected one.
- * Alt-K: where K is the mnemonic (underlined) character of any tab, will
+ * :kbd:`Control-Tab`: selects the tab following the currently selected one.
+ * :kbd:`Shift-Control-Tab`: selects the tab preceding the currently selected one.
+ * :kbd:`Alt-K`: where *K* is the mnemonic (underlined) character of any tab, will
select that tab.
Multiple notebooks in a single toplevel may be enabled for traversal,
diff --git a/Doc/library/unittest.rst b/Doc/library/unittest.rst
index 41478f3..5e3bd1c 100644
--- a/Doc/library/unittest.rst
+++ b/Doc/library/unittest.rst
@@ -226,8 +226,8 @@
.. cmdoption:: -c, --catch
- Control-C during the test run waits for the current test to end and then
- reports all the results so far. A second control-C raises the normal
+ :kbd:`Control-C` during the test run waits for the current test to end and then
+ reports all the results so far. A second :kbd:`Control-C` raises the normal
:exc:`KeyboardInterrupt` exception.
See `Signal Handling`_ for the functions that provide this functionality.
diff --git a/Doc/tutorial/appendix.rst b/Doc/tutorial/appendix.rst
index befb96a..7ab588b 100644
--- a/Doc/tutorial/appendix.rst
+++ b/Doc/tutorial/appendix.rst
@@ -25,7 +25,7 @@
standard error stream; normal output from executed commands is written to
standard output.
-Typing the interrupt character (usually Control-C or DEL) to the primary or
+Typing the interrupt character (usually :kbd:`Control-C` or :kbd:`Delete`) to the primary or
secondary prompt cancels the input and returns to the primary prompt. [#]_
Typing an interrupt while a command is executing raises the
:exc:`KeyboardInterrupt` exception, which may be handled by a :keyword:`try`
diff --git a/Doc/tutorial/interpreter.rst b/Doc/tutorial/interpreter.rst
index 67f927f..5f37504 100644
--- a/Doc/tutorial/interpreter.rst
+++ b/Doc/tutorial/interpreter.rst
@@ -37,7 +37,7 @@
Unix, whoever installed the interpreter may have enabled support for the GNU
readline library, which adds more elaborate interactive editing and history
features. Perhaps the quickest check to see whether command line editing is
-supported is typing Control-P to the first Python prompt you get. If it beeps,
+supported is typing :kbd:`Control-P` to the first Python prompt you get. If it beeps,
you have command line editing; see Appendix :ref:`tut-interacting` for an
introduction to the keys. If nothing appears to happen, or if ``^P`` is echoed,
command line editing isn't available; you'll only be able to use backspace to
diff --git a/Doc/using/cmdline.rst b/Doc/using/cmdline.rst
index ce5e76f..3f314b7 100644
--- a/Doc/using/cmdline.rst
+++ b/Doc/using/cmdline.rst
@@ -41,7 +41,7 @@
* When called with standard input connected to a tty device, it prompts for
commands and executes them until an EOF (an end-of-file character, you can
- produce that with *Ctrl-D* on UNIX or *Ctrl-Z, Enter* on Windows) is read.
+ produce that with :kbd:`Ctrl-D` on UNIX or :kbd:`Ctrl-Z, Enter` on Windows) is read.
* When called with a file name argument or with a file as standard input, it
reads and executes a script from that file.
* When called with a directory name argument, it reads and executes an
diff --git a/Doc/whatsnew/2.0.rst b/Doc/whatsnew/2.0.rst
index b6c4fb9..67e1fc7 100644
--- a/Doc/whatsnew/2.0.rst
+++ b/Doc/whatsnew/2.0.rst
@@ -1174,8 +1174,8 @@
* In the editor window, there is now a line/column bar at the bottom.
-* Three new keystroke commands: Check module (Alt-F5), Import module (F5) and
- Run script (Ctrl-F5).
+* Three new keystroke commands: Check module (:kbd:`Alt-F5`), Import module (:kbd:`F5`) and
+ Run script (:kbd:`Ctrl-F5`).
.. ======================================================================
diff --git a/Doc/whatsnew/2.5.rst b/Doc/whatsnew/2.5.rst
index 9d2e124..b0c0af0 100644
--- a/Doc/whatsnew/2.5.rst
+++ b/Doc/whatsnew/2.5.rst
@@ -827,7 +827,7 @@
This rearrangement was done because people often want to catch all exceptions
that indicate program errors. :exc:`KeyboardInterrupt` and :exc:`SystemExit`
aren't errors, though, and usually represent an explicit action such as the user
-hitting Control-C or code calling :func:`sys.exit`. A bare ``except:`` will
+hitting :kbd:`Control-C` or code calling :func:`sys.exit`. A bare ``except:`` will
catch all exceptions, so you commonly need to list :exc:`KeyboardInterrupt` and
:exc:`SystemExit` in order to re-raise them. The usual pattern is::
diff --git a/Doc/whatsnew/2.7.rst b/Doc/whatsnew/2.7.rst
index 65eaf17..f4e7589 100644
--- a/Doc/whatsnew/2.7.rst
+++ b/Doc/whatsnew/2.7.rst
@@ -2320,7 +2320,7 @@
* The :func:`os.kill` function now works on Windows. The signal value
can be the constants :const:`CTRL_C_EVENT`,
:const:`CTRL_BREAK_EVENT`, or any integer. The first two constants
- will send Control-C and Control-Break keystroke events to
+ will send :kbd:`Control-C` and :kbd:`Control-Break` keystroke events to
subprocesses; any other value will use the :c:func:`TerminateProcess`
API. (Contributed by Miki Tebeka; :issue:`1220212`.)