| # Test iterators. |
| |
| import unittest |
| from test.test_support import run_unittest, TESTFN, unlink, have_unicode, \ |
| _check_py3k_warnings |
| |
| # Test result of triple loop (too big to inline) |
| TRIPLETS = [(0, 0, 0), (0, 0, 1), (0, 0, 2), |
| (0, 1, 0), (0, 1, 1), (0, 1, 2), |
| (0, 2, 0), (0, 2, 1), (0, 2, 2), |
| |
| (1, 0, 0), (1, 0, 1), (1, 0, 2), |
| (1, 1, 0), (1, 1, 1), (1, 1, 2), |
| (1, 2, 0), (1, 2, 1), (1, 2, 2), |
| |
| (2, 0, 0), (2, 0, 1), (2, 0, 2), |
| (2, 1, 0), (2, 1, 1), (2, 1, 2), |
| (2, 2, 0), (2, 2, 1), (2, 2, 2)] |
| |
| # Helper classes |
| |
| class BasicIterClass: |
| def __init__(self, n): |
| self.n = n |
| self.i = 0 |
| def next(self): |
| res = self.i |
| if res >= self.n: |
| raise StopIteration |
| self.i = res + 1 |
| return res |
| |
| class IteratingSequenceClass: |
| def __init__(self, n): |
| self.n = n |
| def __iter__(self): |
| return BasicIterClass(self.n) |
| |
| class SequenceClass: |
| def __init__(self, n): |
| self.n = n |
| def __getitem__(self, i): |
| if 0 <= i < self.n: |
| return i |
| else: |
| raise IndexError |
| |
| # Main test suite |
| |
| class TestCase(unittest.TestCase): |
| |
| # Helper to check that an iterator returns a given sequence |
| def check_iterator(self, it, seq): |
| res = [] |
| while 1: |
| try: |
| val = it.next() |
| except StopIteration: |
| break |
| res.append(val) |
| self.assertEqual(res, seq) |
| |
| # Helper to check that a for loop generates a given sequence |
| def check_for_loop(self, expr, seq): |
| res = [] |
| for val in expr: |
| res.append(val) |
| self.assertEqual(res, seq) |
| |
| # Test basic use of iter() function |
| def test_iter_basic(self): |
| self.check_iterator(iter(range(10)), range(10)) |
| |
| # Test that iter(iter(x)) is the same as iter(x) |
| def test_iter_idempotency(self): |
| seq = range(10) |
| it = iter(seq) |
| it2 = iter(it) |
| self.assert_(it is it2) |
| |
| # Test that for loops over iterators work |
| def test_iter_for_loop(self): |
| self.check_for_loop(iter(range(10)), range(10)) |
| |
| # Test several independent iterators over the same list |
| def test_iter_independence(self): |
| seq = range(3) |
| res = [] |
| for i in iter(seq): |
| for j in iter(seq): |
| for k in iter(seq): |
| res.append((i, j, k)) |
| self.assertEqual(res, TRIPLETS) |
| |
| # Test triple list comprehension using iterators |
| def test_nested_comprehensions_iter(self): |
| seq = range(3) |
| res = [(i, j, k) |
| for i in iter(seq) for j in iter(seq) for k in iter(seq)] |
| self.assertEqual(res, TRIPLETS) |
| |
| # Test triple list comprehension without iterators |
| def test_nested_comprehensions_for(self): |
| seq = range(3) |
| res = [(i, j, k) for i in seq for j in seq for k in seq] |
| self.assertEqual(res, TRIPLETS) |
| |
| # Test a class with __iter__ in a for loop |
| def test_iter_class_for(self): |
| self.check_for_loop(IteratingSequenceClass(10), range(10)) |
| |
| # Test a class with __iter__ with explicit iter() |
| def test_iter_class_iter(self): |
| self.check_iterator(iter(IteratingSequenceClass(10)), range(10)) |
| |
| # Test for loop on a sequence class without __iter__ |
| def test_seq_class_for(self): |
| self.check_for_loop(SequenceClass(10), range(10)) |
| |
| # Test iter() on a sequence class without __iter__ |
| def test_seq_class_iter(self): |
| self.check_iterator(iter(SequenceClass(10)), range(10)) |
| |
| # Test two-argument iter() with callable instance |
| def test_iter_callable(self): |
| class C: |
| def __init__(self): |
| self.i = 0 |
| def __call__(self): |
| i = self.i |
| self.i = i + 1 |
| if i > 100: |
| raise IndexError # Emergency stop |
| return i |
| self.check_iterator(iter(C(), 10), range(10)) |
| |
| # Test two-argument iter() with function |
| def test_iter_function(self): |
| def spam(state=[0]): |
| i = state[0] |
| state[0] = i+1 |
| return i |
| self.check_iterator(iter(spam, 10), range(10)) |
| |
| # Test two-argument iter() with function that raises StopIteration |
| def test_iter_function_stop(self): |
| def spam(state=[0]): |
| i = state[0] |
| if i == 10: |
| raise StopIteration |
| state[0] = i+1 |
| return i |
| self.check_iterator(iter(spam, 20), range(10)) |
| |
| # Test exception propagation through function iterator |
| def test_exception_function(self): |
| def spam(state=[0]): |
| i = state[0] |
| state[0] = i+1 |
| if i == 10: |
| raise RuntimeError |
| return i |
| res = [] |
| try: |
| for x in iter(spam, 20): |
| res.append(x) |
| except RuntimeError: |
| self.assertEqual(res, range(10)) |
| else: |
| self.fail("should have raised RuntimeError") |
| |
| # Test exception propagation through sequence iterator |
| def test_exception_sequence(self): |
| class MySequenceClass(SequenceClass): |
| def __getitem__(self, i): |
| if i == 10: |
| raise RuntimeError |
| return SequenceClass.__getitem__(self, i) |
| res = [] |
| try: |
| for x in MySequenceClass(20): |
| res.append(x) |
| except RuntimeError: |
| self.assertEqual(res, range(10)) |
| else: |
| self.fail("should have raised RuntimeError") |
| |
| # Test for StopIteration from __getitem__ |
| def test_stop_sequence(self): |
| class MySequenceClass(SequenceClass): |
| def __getitem__(self, i): |
| if i == 10: |
| raise StopIteration |
| return SequenceClass.__getitem__(self, i) |
| self.check_for_loop(MySequenceClass(20), range(10)) |
| |
| # Test a big range |
| def test_iter_big_range(self): |
| self.check_for_loop(iter(range(10000)), range(10000)) |
| |
| # Test an empty list |
| def test_iter_empty(self): |
| self.check_for_loop(iter([]), []) |
| |
| # Test a tuple |
| def test_iter_tuple(self): |
| self.check_for_loop(iter((0,1,2,3,4,5,6,7,8,9)), range(10)) |
| |
| # Test an xrange |
| def test_iter_xrange(self): |
| self.check_for_loop(iter(xrange(10)), range(10)) |
| |
| # Test a string |
| def test_iter_string(self): |
| self.check_for_loop(iter("abcde"), ["a", "b", "c", "d", "e"]) |
| |
| # Test a Unicode string |
| if have_unicode: |
| def test_iter_unicode(self): |
| self.check_for_loop(iter(unicode("abcde")), |
| [unicode("a"), unicode("b"), unicode("c"), |
| unicode("d"), unicode("e")]) |
| |
| # Test a directory |
| def test_iter_dict(self): |
| dict = {} |
| for i in range(10): |
| dict[i] = None |
| self.check_for_loop(dict, dict.keys()) |
| |
| # Test a file |
| def test_iter_file(self): |
| f = open(TESTFN, "w") |
| try: |
| for i in range(5): |
| f.write("%d\n" % i) |
| finally: |
| f.close() |
| f = open(TESTFN, "r") |
| try: |
| self.check_for_loop(f, ["0\n", "1\n", "2\n", "3\n", "4\n"]) |
| self.check_for_loop(f, []) |
| finally: |
| f.close() |
| try: |
| unlink(TESTFN) |
| except OSError: |
| pass |
| |
| # Test list()'s use of iterators. |
| def test_builtin_list(self): |
| self.assertEqual(list(SequenceClass(5)), range(5)) |
| self.assertEqual(list(SequenceClass(0)), []) |
| self.assertEqual(list(()), []) |
| self.assertEqual(list(range(10, -1, -1)), range(10, -1, -1)) |
| |
| d = {"one": 1, "two": 2, "three": 3} |
| self.assertEqual(list(d), d.keys()) |
| |
| self.assertRaises(TypeError, list, list) |
| self.assertRaises(TypeError, list, 42) |
| |
| f = open(TESTFN, "w") |
| try: |
| for i in range(5): |
| f.write("%d\n" % i) |
| finally: |
| f.close() |
| f = open(TESTFN, "r") |
| try: |
| self.assertEqual(list(f), ["0\n", "1\n", "2\n", "3\n", "4\n"]) |
| f.seek(0, 0) |
| self.assertEqual(list(f), |
| ["0\n", "1\n", "2\n", "3\n", "4\n"]) |
| finally: |
| f.close() |
| try: |
| unlink(TESTFN) |
| except OSError: |
| pass |
| |
| # Test tuples()'s use of iterators. |
| def test_builtin_tuple(self): |
| self.assertEqual(tuple(SequenceClass(5)), (0, 1, 2, 3, 4)) |
| self.assertEqual(tuple(SequenceClass(0)), ()) |
| self.assertEqual(tuple([]), ()) |
| self.assertEqual(tuple(()), ()) |
| self.assertEqual(tuple("abc"), ("a", "b", "c")) |
| |
| d = {"one": 1, "two": 2, "three": 3} |
| self.assertEqual(tuple(d), tuple(d.keys())) |
| |
| self.assertRaises(TypeError, tuple, list) |
| self.assertRaises(TypeError, tuple, 42) |
| |
| f = open(TESTFN, "w") |
| try: |
| for i in range(5): |
| f.write("%d\n" % i) |
| finally: |
| f.close() |
| f = open(TESTFN, "r") |
| try: |
| self.assertEqual(tuple(f), ("0\n", "1\n", "2\n", "3\n", "4\n")) |
| f.seek(0, 0) |
| self.assertEqual(tuple(f), |
| ("0\n", "1\n", "2\n", "3\n", "4\n")) |
| finally: |
| f.close() |
| try: |
| unlink(TESTFN) |
| except OSError: |
| pass |
| |
| # Test filter()'s use of iterators. |
| def test_builtin_filter(self): |
| self.assertEqual(filter(None, SequenceClass(5)), range(1, 5)) |
| self.assertEqual(filter(None, SequenceClass(0)), []) |
| self.assertEqual(filter(None, ()), ()) |
| self.assertEqual(filter(None, "abc"), "abc") |
| |
| d = {"one": 1, "two": 2, "three": 3} |
| self.assertEqual(filter(None, d), d.keys()) |
| |
| self.assertRaises(TypeError, filter, None, list) |
| self.assertRaises(TypeError, filter, None, 42) |
| |
| class Boolean: |
| def __init__(self, truth): |
| self.truth = truth |
| def __nonzero__(self): |
| return self.truth |
| bTrue = Boolean(1) |
| bFalse = Boolean(0) |
| |
| class Seq: |
| def __init__(self, *args): |
| self.vals = args |
| def __iter__(self): |
| class SeqIter: |
| def __init__(self, vals): |
| self.vals = vals |
| self.i = 0 |
| def __iter__(self): |
| return self |
| def next(self): |
| i = self.i |
| self.i = i + 1 |
| if i < len(self.vals): |
| return self.vals[i] |
| else: |
| raise StopIteration |
| return SeqIter(self.vals) |
| |
| seq = Seq(*([bTrue, bFalse] * 25)) |
| self.assertEqual(filter(lambda x: not x, seq), [bFalse]*25) |
| self.assertEqual(filter(lambda x: not x, iter(seq)), [bFalse]*25) |
| |
| # Test max() and min()'s use of iterators. |
| def test_builtin_max_min(self): |
| self.assertEqual(max(SequenceClass(5)), 4) |
| self.assertEqual(min(SequenceClass(5)), 0) |
| self.assertEqual(max(8, -1), 8) |
| self.assertEqual(min(8, -1), -1) |
| |
| d = {"one": 1, "two": 2, "three": 3} |
| self.assertEqual(max(d), "two") |
| self.assertEqual(min(d), "one") |
| self.assertEqual(max(d.itervalues()), 3) |
| self.assertEqual(min(iter(d.itervalues())), 1) |
| |
| f = open(TESTFN, "w") |
| try: |
| f.write("medium line\n") |
| f.write("xtra large line\n") |
| f.write("itty-bitty line\n") |
| finally: |
| f.close() |
| f = open(TESTFN, "r") |
| try: |
| self.assertEqual(min(f), "itty-bitty line\n") |
| f.seek(0, 0) |
| self.assertEqual(max(f), "xtra large line\n") |
| finally: |
| f.close() |
| try: |
| unlink(TESTFN) |
| except OSError: |
| pass |
| |
| # Test map()'s use of iterators. |
| def test_builtin_map(self): |
| self.assertEqual(map(lambda x: x+1, SequenceClass(5)), range(1, 6)) |
| |
| d = {"one": 1, "two": 2, "three": 3} |
| self.assertEqual(map(lambda k, d=d: (k, d[k]), d), d.items()) |
| dkeys = d.keys() |
| expected = [(i < len(d) and dkeys[i] or None, |
| i, |
| i < len(d) and dkeys[i] or None) |
| for i in range(5)] |
| |
| # Deprecated map(None, ...) |
| with _check_py3k_warnings(): |
| self.assertEqual(map(None, SequenceClass(5)), range(5)) |
| self.assertEqual(map(None, d), d.keys()) |
| self.assertEqual(map(None, d, |
| SequenceClass(5), |
| iter(d.iterkeys())), |
| expected) |
| |
| f = open(TESTFN, "w") |
| try: |
| for i in range(10): |
| f.write("xy" * i + "\n") # line i has len 2*i+1 |
| finally: |
| f.close() |
| f = open(TESTFN, "r") |
| try: |
| self.assertEqual(map(len, f), range(1, 21, 2)) |
| finally: |
| f.close() |
| try: |
| unlink(TESTFN) |
| except OSError: |
| pass |
| |
| # Test zip()'s use of iterators. |
| def test_builtin_zip(self): |
| self.assertEqual(zip(), []) |
| self.assertEqual(zip(*[]), []) |
| self.assertEqual(zip(*[(1, 2), 'ab']), [(1, 'a'), (2, 'b')]) |
| |
| self.assertRaises(TypeError, zip, None) |
| self.assertRaises(TypeError, zip, range(10), 42) |
| self.assertRaises(TypeError, zip, range(10), zip) |
| |
| self.assertEqual(zip(IteratingSequenceClass(3)), |
| [(0,), (1,), (2,)]) |
| self.assertEqual(zip(SequenceClass(3)), |
| [(0,), (1,), (2,)]) |
| |
| d = {"one": 1, "two": 2, "three": 3} |
| self.assertEqual(d.items(), zip(d, d.itervalues())) |
| |
| # Generate all ints starting at constructor arg. |
| class IntsFrom: |
| def __init__(self, start): |
| self.i = start |
| |
| def __iter__(self): |
| return self |
| |
| def next(self): |
| i = self.i |
| self.i = i+1 |
| return i |
| |
| f = open(TESTFN, "w") |
| try: |
| f.write("a\n" "bbb\n" "cc\n") |
| finally: |
| f.close() |
| f = open(TESTFN, "r") |
| try: |
| self.assertEqual(zip(IntsFrom(0), f, IntsFrom(-100)), |
| [(0, "a\n", -100), |
| (1, "bbb\n", -99), |
| (2, "cc\n", -98)]) |
| finally: |
| f.close() |
| try: |
| unlink(TESTFN) |
| except OSError: |
| pass |
| |
| self.assertEqual(zip(xrange(5)), [(i,) for i in range(5)]) |
| |
| # Classes that lie about their lengths. |
| class NoGuessLen5: |
| def __getitem__(self, i): |
| if i >= 5: |
| raise IndexError |
| return i |
| |
| class Guess3Len5(NoGuessLen5): |
| def __len__(self): |
| return 3 |
| |
| class Guess30Len5(NoGuessLen5): |
| def __len__(self): |
| return 30 |
| |
| self.assertEqual(len(Guess3Len5()), 3) |
| self.assertEqual(len(Guess30Len5()), 30) |
| self.assertEqual(zip(NoGuessLen5()), zip(range(5))) |
| self.assertEqual(zip(Guess3Len5()), zip(range(5))) |
| self.assertEqual(zip(Guess30Len5()), zip(range(5))) |
| |
| expected = [(i, i) for i in range(5)] |
| for x in NoGuessLen5(), Guess3Len5(), Guess30Len5(): |
| for y in NoGuessLen5(), Guess3Len5(), Guess30Len5(): |
| self.assertEqual(zip(x, y), expected) |
| |
| # Test reduces()'s use of iterators. |
| def test_deprecated_builtin_reduce(self): |
| with _check_py3k_warnings(): |
| self._test_builtin_reduce() |
| |
| def _test_builtin_reduce(self): |
| from operator import add |
| self.assertEqual(reduce(add, SequenceClass(5)), 10) |
| self.assertEqual(reduce(add, SequenceClass(5), 42), 52) |
| self.assertRaises(TypeError, reduce, add, SequenceClass(0)) |
| self.assertEqual(reduce(add, SequenceClass(0), 42), 42) |
| self.assertEqual(reduce(add, SequenceClass(1)), 0) |
| self.assertEqual(reduce(add, SequenceClass(1), 42), 42) |
| |
| d = {"one": 1, "two": 2, "three": 3} |
| self.assertEqual(reduce(add, d), "".join(d.keys())) |
| |
| # This test case will be removed if we don't have Unicode |
| def test_unicode_join_endcase(self): |
| |
| # This class inserts a Unicode object into its argument's natural |
| # iteration, in the 3rd position. |
| class OhPhooey: |
| def __init__(self, seq): |
| self.it = iter(seq) |
| self.i = 0 |
| |
| def __iter__(self): |
| return self |
| |
| def next(self): |
| i = self.i |
| self.i = i+1 |
| if i == 2: |
| return unicode("fooled you!") |
| return self.it.next() |
| |
| f = open(TESTFN, "w") |
| try: |
| f.write("a\n" + "b\n" + "c\n") |
| finally: |
| f.close() |
| |
| f = open(TESTFN, "r") |
| # Nasty: string.join(s) can't know whether unicode.join() is needed |
| # until it's seen all of s's elements. But in this case, f's |
| # iterator cannot be restarted. So what we're testing here is |
| # whether string.join() can manage to remember everything it's seen |
| # and pass that on to unicode.join(). |
| try: |
| got = " - ".join(OhPhooey(f)) |
| self.assertEqual(got, unicode("a\n - b\n - fooled you! - c\n")) |
| finally: |
| f.close() |
| try: |
| unlink(TESTFN) |
| except OSError: |
| pass |
| if not have_unicode: |
| def test_unicode_join_endcase(self): pass |
| |
| # Test iterators with 'x in y' and 'x not in y'. |
| def test_in_and_not_in(self): |
| for sc5 in IteratingSequenceClass(5), SequenceClass(5): |
| for i in range(5): |
| self.assert_(i in sc5) |
| for i in "abc", -1, 5, 42.42, (3, 4), [], {1: 1}, 3-12j, sc5: |
| self.assert_(i not in sc5) |
| |
| self.assertRaises(TypeError, lambda: 3 in 12) |
| self.assertRaises(TypeError, lambda: 3 not in map) |
| |
| d = {"one": 1, "two": 2, "three": 3, 1j: 2j} |
| for k in d: |
| self.assert_(k in d) |
| self.assert_(k not in d.itervalues()) |
| for v in d.values(): |
| self.assert_(v in d.itervalues()) |
| self.assert_(v not in d) |
| for k, v in d.iteritems(): |
| self.assert_((k, v) in d.iteritems()) |
| self.assert_((v, k) not in d.iteritems()) |
| |
| f = open(TESTFN, "w") |
| try: |
| f.write("a\n" "b\n" "c\n") |
| finally: |
| f.close() |
| f = open(TESTFN, "r") |
| try: |
| for chunk in "abc": |
| f.seek(0, 0) |
| self.assert_(chunk not in f) |
| f.seek(0, 0) |
| self.assert_((chunk + "\n") in f) |
| finally: |
| f.close() |
| try: |
| unlink(TESTFN) |
| except OSError: |
| pass |
| |
| # Test iterators with operator.countOf (PySequence_Count). |
| def test_countOf(self): |
| from operator import countOf |
| self.assertEqual(countOf([1,2,2,3,2,5], 2), 3) |
| self.assertEqual(countOf((1,2,2,3,2,5), 2), 3) |
| self.assertEqual(countOf("122325", "2"), 3) |
| self.assertEqual(countOf("122325", "6"), 0) |
| |
| self.assertRaises(TypeError, countOf, 42, 1) |
| self.assertRaises(TypeError, countOf, countOf, countOf) |
| |
| d = {"one": 3, "two": 3, "three": 3, 1j: 2j} |
| for k in d: |
| self.assertEqual(countOf(d, k), 1) |
| self.assertEqual(countOf(d.itervalues(), 3), 3) |
| self.assertEqual(countOf(d.itervalues(), 2j), 1) |
| self.assertEqual(countOf(d.itervalues(), 1j), 0) |
| |
| f = open(TESTFN, "w") |
| try: |
| f.write("a\n" "b\n" "c\n" "b\n") |
| finally: |
| f.close() |
| f = open(TESTFN, "r") |
| try: |
| for letter, count in ("a", 1), ("b", 2), ("c", 1), ("d", 0): |
| f.seek(0, 0) |
| self.assertEqual(countOf(f, letter + "\n"), count) |
| finally: |
| f.close() |
| try: |
| unlink(TESTFN) |
| except OSError: |
| pass |
| |
| # Test iterators with operator.indexOf (PySequence_Index). |
| def test_indexOf(self): |
| from operator import indexOf |
| self.assertEqual(indexOf([1,2,2,3,2,5], 1), 0) |
| self.assertEqual(indexOf((1,2,2,3,2,5), 2), 1) |
| self.assertEqual(indexOf((1,2,2,3,2,5), 3), 3) |
| self.assertEqual(indexOf((1,2,2,3,2,5), 5), 5) |
| self.assertRaises(ValueError, indexOf, (1,2,2,3,2,5), 0) |
| self.assertRaises(ValueError, indexOf, (1,2,2,3,2,5), 6) |
| |
| self.assertEqual(indexOf("122325", "2"), 1) |
| self.assertEqual(indexOf("122325", "5"), 5) |
| self.assertRaises(ValueError, indexOf, "122325", "6") |
| |
| self.assertRaises(TypeError, indexOf, 42, 1) |
| self.assertRaises(TypeError, indexOf, indexOf, indexOf) |
| |
| f = open(TESTFN, "w") |
| try: |
| f.write("a\n" "b\n" "c\n" "d\n" "e\n") |
| finally: |
| f.close() |
| f = open(TESTFN, "r") |
| try: |
| fiter = iter(f) |
| self.assertEqual(indexOf(fiter, "b\n"), 1) |
| self.assertEqual(indexOf(fiter, "d\n"), 1) |
| self.assertEqual(indexOf(fiter, "e\n"), 0) |
| self.assertRaises(ValueError, indexOf, fiter, "a\n") |
| finally: |
| f.close() |
| try: |
| unlink(TESTFN) |
| except OSError: |
| pass |
| |
| iclass = IteratingSequenceClass(3) |
| for i in range(3): |
| self.assertEqual(indexOf(iclass, i), i) |
| self.assertRaises(ValueError, indexOf, iclass, -1) |
| |
| # Test iterators with file.writelines(). |
| def test_writelines(self): |
| f = file(TESTFN, "w") |
| |
| try: |
| self.assertRaises(TypeError, f.writelines, None) |
| self.assertRaises(TypeError, f.writelines, 42) |
| |
| f.writelines(["1\n", "2\n"]) |
| f.writelines(("3\n", "4\n")) |
| f.writelines({'5\n': None}) |
| f.writelines({}) |
| |
| # Try a big chunk too. |
| class Iterator: |
| def __init__(self, start, finish): |
| self.start = start |
| self.finish = finish |
| self.i = self.start |
| |
| def next(self): |
| if self.i >= self.finish: |
| raise StopIteration |
| result = str(self.i) + '\n' |
| self.i += 1 |
| return result |
| |
| def __iter__(self): |
| return self |
| |
| class Whatever: |
| def __init__(self, start, finish): |
| self.start = start |
| self.finish = finish |
| |
| def __iter__(self): |
| return Iterator(self.start, self.finish) |
| |
| f.writelines(Whatever(6, 6+2000)) |
| f.close() |
| |
| f = file(TESTFN) |
| expected = [str(i) + "\n" for i in range(1, 2006)] |
| self.assertEqual(list(f), expected) |
| |
| finally: |
| f.close() |
| try: |
| unlink(TESTFN) |
| except OSError: |
| pass |
| |
| |
| # Test iterators on RHS of unpacking assignments. |
| def test_unpack_iter(self): |
| a, b = 1, 2 |
| self.assertEqual((a, b), (1, 2)) |
| |
| a, b, c = IteratingSequenceClass(3) |
| self.assertEqual((a, b, c), (0, 1, 2)) |
| |
| try: # too many values |
| a, b = IteratingSequenceClass(3) |
| except ValueError: |
| pass |
| else: |
| self.fail("should have raised ValueError") |
| |
| try: # not enough values |
| a, b, c = IteratingSequenceClass(2) |
| except ValueError: |
| pass |
| else: |
| self.fail("should have raised ValueError") |
| |
| try: # not iterable |
| a, b, c = len |
| except TypeError: |
| pass |
| else: |
| self.fail("should have raised TypeError") |
| |
| a, b, c = {1: 42, 2: 42, 3: 42}.itervalues() |
| self.assertEqual((a, b, c), (42, 42, 42)) |
| |
| f = open(TESTFN, "w") |
| lines = ("a\n", "bb\n", "ccc\n") |
| try: |
| for line in lines: |
| f.write(line) |
| finally: |
| f.close() |
| f = open(TESTFN, "r") |
| try: |
| a, b, c = f |
| self.assertEqual((a, b, c), lines) |
| finally: |
| f.close() |
| try: |
| unlink(TESTFN) |
| except OSError: |
| pass |
| |
| (a, b), (c,) = IteratingSequenceClass(2), {42: 24} |
| self.assertEqual((a, b, c), (0, 1, 42)) |
| |
| # Test reference count behavior |
| |
| class C(object): |
| count = 0 |
| def __new__(cls): |
| cls.count += 1 |
| return object.__new__(cls) |
| def __del__(self): |
| cls = self.__class__ |
| assert cls.count > 0 |
| cls.count -= 1 |
| x = C() |
| self.assertEqual(C.count, 1) |
| del x |
| self.assertEqual(C.count, 0) |
| l = [C(), C(), C()] |
| self.assertEqual(C.count, 3) |
| try: |
| a, b = iter(l) |
| except ValueError: |
| pass |
| del l |
| self.assertEqual(C.count, 0) |
| |
| |
| # Make sure StopIteration is a "sink state". |
| # This tests various things that weren't sink states in Python 2.2.1, |
| # plus various things that always were fine. |
| |
| def test_sinkstate_list(self): |
| # This used to fail |
| a = range(5) |
| b = iter(a) |
| self.assertEqual(list(b), range(5)) |
| a.extend(range(5, 10)) |
| self.assertEqual(list(b), []) |
| |
| def test_sinkstate_tuple(self): |
| a = (0, 1, 2, 3, 4) |
| b = iter(a) |
| self.assertEqual(list(b), range(5)) |
| self.assertEqual(list(b), []) |
| |
| def test_sinkstate_string(self): |
| a = "abcde" |
| b = iter(a) |
| self.assertEqual(list(b), ['a', 'b', 'c', 'd', 'e']) |
| self.assertEqual(list(b), []) |
| |
| def test_sinkstate_sequence(self): |
| # This used to fail |
| a = SequenceClass(5) |
| b = iter(a) |
| self.assertEqual(list(b), range(5)) |
| a.n = 10 |
| self.assertEqual(list(b), []) |
| |
| def test_sinkstate_callable(self): |
| # This used to fail |
| def spam(state=[0]): |
| i = state[0] |
| state[0] = i+1 |
| if i == 10: |
| raise AssertionError, "shouldn't have gotten this far" |
| return i |
| b = iter(spam, 5) |
| self.assertEqual(list(b), range(5)) |
| self.assertEqual(list(b), []) |
| |
| def test_sinkstate_dict(self): |
| # XXX For a more thorough test, see towards the end of: |
| # http://mail.python.org/pipermail/python-dev/2002-July/026512.html |
| a = {1:1, 2:2, 0:0, 4:4, 3:3} |
| for b in iter(a), a.iterkeys(), a.iteritems(), a.itervalues(): |
| b = iter(a) |
| self.assertEqual(len(list(b)), 5) |
| self.assertEqual(list(b), []) |
| |
| def test_sinkstate_yield(self): |
| def gen(): |
| for i in range(5): |
| yield i |
| b = gen() |
| self.assertEqual(list(b), range(5)) |
| self.assertEqual(list(b), []) |
| |
| def test_sinkstate_range(self): |
| a = xrange(5) |
| b = iter(a) |
| self.assertEqual(list(b), range(5)) |
| self.assertEqual(list(b), []) |
| |
| def test_sinkstate_enumerate(self): |
| a = range(5) |
| e = enumerate(a) |
| b = iter(e) |
| self.assertEqual(list(b), zip(range(5), range(5))) |
| self.assertEqual(list(b), []) |
| |
| |
| def test_main(): |
| run_unittest(TestCase) |
| |
| |
| if __name__ == "__main__": |
| test_main() |