| Tue Jan 25 20:11:49 1994 Guido van Rossum (guido@voorn.cwi.nl) |
| |
| * Doc/ext.tex: revamped, finally ready for release |
| |
| * Doc/{Makefile,myformat.perl}: support latex2html (0.5.1) |
| |
| * README: correct typo on DL_DIRECTORY |
| |
| ======================================================================== |
| Release of 1.0.0 BETA 6 (Jan 24 1994) |
| ======================================================================== |
| Mon Jan 24 16:37:46 1994 Guido van Rossum (guido@voorn.cwi.nl) |
| |
| * Doc/ref?.tex: Change \verb\<stuff>\ into \verb@<stuff>@ so |
| latex2html doesn't crash |
| |
| Thu Jan 20 18:05:18 1994 Guido van Rossum (guido@voorn.cwi.nl) |
| |
| * Ext-dummy/, README, Makefile.in: Created new directory |
| Ext-dummy/. Ext-dummy/ contains its own README and copies of |
| Extensions/mk{ext,mf}.py. |
| |
| Tue Jan 18 11:04:16 1994 Guido van Rossum (guido@voorn.cwi.nl) |
| |
| * Python/getmtime.c: Include config.h if we have it |
| |
| * Modules/Setup.in: fixed comments about GMP version |
| |
| * Modules/nismodule.c: define YPPROC_MAPLIST, YPPROG, YPVERS as |
| plain integer literals, to make it work on 64 bit machines |
| |
| * Parser/grammar.c (translabel): remove redundant decl of strchr() |
| (which caused trouble on AIX) |
| |
| Sun Jan 16 14:13:13 1994 Guido van Rossum (guido@voorn.cwi.nl) |
| |
| * configure.in: test for fcntl.h |
| |
| * Modules/posixmodule.c: include fcntl.h if it exists |
| |
| Fri Jan 14 17:35:33 1994 Guido van Rossum (guido@voorn.cwi.nl) |
| |
| * configure.in: check for sys/time.h; substitute and check for AR; |
| check for nice() |
| |
| * Makefile.in: make python .PRECIOUS; define OPT=-O and pass it to |
| submakes |
| |
| * */Makefile*in: set OPT=-O; set AR=@ar@ |
| |
| * Modules/Setup.minix: new |
| |
| * Lib/audiodev.py: only import system specific modules if needed |
| |
| Thu Jan 13 16:40:28 1994 Guido van Rossum (guido@voorn.cwi.nl) |
| |
| * Modules/flmodule.c: make type objects static |
| |
| * Modules/almodule.c: make type objects static |
| |
| * Makefile.in: add rule to build Makefile; add VPATH for that; |
| remove dependency on configure script (you can run 'make autoconf' |
| instead); add Lib/test to path for test target; |
| |
| * Lib/test: new subdirectory, holds all test modules |
| |
| Wed Jan 12 10:17:41 1994 Guido van Rossum (guido@voorn.cwi.nl) |
| |
| * acconfig.h: added HAVE_ALTZONE |
| |
| * configure.in: test for altzone; check for working |
| termcap/termlib when --with-readline used; don't test for readline |
| function; send errors to stderr |
| |
| * Lib/test_grammar.py: fix 64-bit int test for max negative int |
| |
| * Python/import.c (get_module): call dlerror() when dlopen() fails |
| (also some layout changes) |
| |
| Tue Jan 11 10:56:00 1994 Guido van Rossum (guido@voorn.cwi.nl) |
| |
| * Python/import.c: use RTLD_NOW (define as 2 if undefined) |
| |
| * Makefile.in: "make (local)clean" shouldn't bother about Include; |
| added .PRECIOUS: config.status |
| |
| * Modules/md5.h: define PROTOTYES as 1 if HAVE_PROTOTYPES is |
| defined |
| |
| * Modules/md5module.c: grand cleanup |
| |
| * Modules/Setup.sgi: renamed to Setup.irix4 |
| |
| * Modules/Setup.sunos5: renamed to Setup.solaris2 |
| |
| * Modules/Setup.in: some makes (e.g. Ultrix) don't strip trailing |
| whitespace from variable definitions -- make sure there isn't any |
| in the defs used to generate PYTHONPATH |
| |
| * Many modules and objects: use 'staticforward' where needed |
| |
| * Include/object.h: added #define 'staticforward' as either static |
| or extern depending on BAD_STATIC_FORWARD |
| |
| * acconfig.h: added BAD_STATIC_FORWARD |
| |
| * configure.in: added test for bad static forward |
| |
| Mon Jan 10 10:35:21 1994 Guido van Rossum (guido@voorn.cwi.nl) |
| |
| * Modules/md5module.c: SCO ODT 3.0 dependent fix |
| |
| * Objects/xxobject.c: quote size fields as tp_basicsize instead of |
| (incorrectly) tp_size |
| |
| * Objects/listobject.c (cmp): arguments must be const!!! |
| |
| * Modules/imageopmodule.c: another attempt at casting away |
| warnings about changed semantics in ANSI C |
| |
| * Modules/regexpr.c: cast away warning about changed semantics in |
| ANSI C |
| |
| * Modules/Makefile.pre.in: add LIBC_S (shared version of -lc, to |
| be figured out by configure) |
| |
| * README, Python/version.c: version 1.0.0 BETA 6 |
| |
| * README: fixed description of Setup (which was buried under the |
| SVR4 exception!); added description of --prefix, --exec-prefix, |
| --with-libm and --with-libc |
| |
| * configure.in: added --with-libc=... and --with-libm=... |
| |
| * Modules/Makefile.pre.in: Remove dependency of Setup on Setup.in, |
| so it is only copied when Setup does not exist at all; add |
| prefix=/usr/local so Setup can base default path on --prefix |
| option to toplevel configure script |
| |
| * Modules/Setup.in: clarified build procedure in comments; don't |
| include GNN's timing module by default; use $(prefix) instead |
| requiring manual edit of DESTDIR |
| |
| * Makefile.in: replace DESTDIR by prefix and exec_prefix and |
| updated affected targets; added inclinstall and libainstall |
| targets |
| |
| * Objects/accessobject.c: removed (???) from comment to avoid |
| trigraph warning |
| |
| * Makefile.in (libinstall): correct typo: (D)DESTDIR |
| |
| Fri Jan 7 10:34:43 1994 Guido van Rossum (guido@voorn.cwi.nl) |
| |
| * README: describe --with-sgi-dl and --with-dl-dld |
| |
| * Python/Makefile.in: compile import.c with -I$(DLINCLDIR) |
| |
| * Python/import.c: check for WITH_SGI_DL and WITH_DL_DLD |
| |
| * acconfig.h: added WITH_SGI_DL and WITH_DL_DLD |
| |
| * configure.in: added --with-sgi-dl=DIR and |
| --with-dl-dld=DIR,DIR; now require --with-readline=DIR and test |
| for existing directory |
| |
| * Lib/test_audioop.py: new module to test (you guessed it) audioop |
| |
| * Modules/audioopmodule.c: got rid of adpcm32lin and lin2adpcm3 -- |
| Jack says they're not useful |
| |
| ======================================================================== |
| Release of 1.0.0 BETA 5 (Jan 6 1994) |
| ======================================================================== |
| |
| Thu Jan 6 13:36:32 1994 Guido van Rossum (guido@voorn.cwi.nl) |
| |
| * readline/Makefile: remove some cruft so it works with VPATH |
| |
| * Lib/aifc.py: remove dependencies on AL (Sjoerd) |
| |
| * README: describe new Setup procedure |
| |
| * Modules/Makefile.pre.in: copy Setup from $9srcdir)/Setup.in so |
| it *really* works with VPATH |
| |
| * Modules/Setup: renamed to Modules/Setup.in |
| |
| * Python/pythonmain.c (realmain): fclose script file |
| |
| * Python/import.c (get_module): fix important leak: close the .py |
| file after parsing! |
| |
| * README, Python/version.c: version 1.0.0 BETA 5 |
| |
| Wed Jan 5 16:42:35 1994 Guido van Rossum (guido@voorn.cwi.nl) |
| |
| * Modules/rgbimgmodule.c: Only include <unistd.h> if it exists |
| |
| * Modules/timemodule.c: don't include sys/time.h on the Mac |
| |
| * Modules/stdwinmodule.c (initstdwin): don't fuss with sys.argv on |
| the mac -- so {check,putback}stringlist aren't needed there |
| |
| * Parser/intrcheck.c: Make sure <MacHeaders> is included before |
| any other include file |
| |
| * Modules/audioopmodule.c: include math.h after allobjects.h (so |
| the latter can be a precompiled header file on the Mac) |
| |
| Wed Jan 5 15:34:26 1994 Guido van Rossum (guido@poseidon.cwi.nl) |
| |
| * Python/pythonrun.c (sighandler): only call kill(getpid()) if |
| getpid() exists; otherwise call exit(1) |
| |
| * configure.in: added test for getpid() |
| |
| * Modules/config.c.in: Changes for Macintosh: new default path, |
| call wargc() in main(); 1994 copyright |
| |
| * Python/frozenmain.c: added declarations for getversion() and |
| getcopyright() (foei!); insert "Python " before version on banner |
| |
| * Python/pythonmain.c: added declarations for getversion() and |
| getcopyright() (foei!); default startupfile to "PythonStartup" on |
| Macintosh; add fclose(fp) for startupfile; insert "Python " before |
| version on banner |
| |
| ======================================================================== |
| Release of 1.0.0 BETA 4 (Jan 5 1994) |
| ======================================================================== |
| |
| Wed Jan 5 01:21:59 1994 Guido van Rossum (guido@voorn.cwi.nl) |
| |
| * README, version.c: bumped version to 1.0.0 BETA 4 |
| |
| * README: removed all references to --with-solaris; updated list |
| of files and directories |
| |
| * Modules/sunaudiodevmodule.c: define SOLARIS if |
| HAVE_SYS_AUDIOIO_H is defined |
| |
| * Python/thread.c: define SOLARIS if HAVE_THREAD_H is defined |
| |
| * configure.in: added test for <thread.h> (SOLARIS thread |
| interface); remvoe test for --with-solaris |
| |
| ======================================================================== |
| Release of 1.0.0 BETA 3 (Jan 5 1994) |
| ======================================================================== |
| |
| Wed Jan 5 00:18:45 1994 Guido van Rossum (guido@voorn.cwi.nl) |
| |
| * {Parser,Objects,Python,Makefile}/Makefile*in: made depend target |
| work with VPATH |
| |
| * README: describe new build procedure; added section on building |
| for multiple architectures |
| |
| * acconfig.h: fix (reversed!) comment for SYS_SELECT_WITH_SYS_TIME |
| |
| * Modules/Makefile.pre.in: copy Setup from $(srcdir) if not |
| present, and use local Setup as input for makesetup script |
| |
| Tue Jan 4 12:32:16 1994 Guido van Rossum (guido@voorn.cwi.nl) |
| |
| * Note that there are no functional changes below -- just changes |
| to the build process and changes to avoid compiler warnings |
| |
| * Modules/Setup: disable nis as well by default, change the |
| pertaining comments, and change the comments about the multimedia |
| modules to be default on |
| |
| * fixed all warnings about function pointer initializations, and |
| miscellanous other warnings (e.g. about extern forward references |
| to static variables); touched random bits of code as a consequence |
| |
| * changed configuration process and Makefiles to support VPATH; |
| for this, config.h(.in) now lives to the toplevel directory, the |
| toplevel Makefile is now created by configure as well, and various |
| improvements to it have been made (e.g. working tags and TAGS |
| targets), the makesetup script follows configure instead of |
| preceding it, it understands srcdir and has an exception for |
| glmodule.c, the intermediate file is called Makefile.pre, the |
| Makefiles don't use TOP any more and are much more careful about |
| the difference between .. and the toplevel directory, and I've |
| improved my understanding of how configure handles srcdir |
| |
| * Modules/threadmodule.c: refuse to compile when WITH_THREAD is not |
| defined |
| |
| * configure.in, acconfig.h, config.h.in, Include/ceval.h, |
| Modules/{stdwin,thread}module.c, Python/{ceval,pythonrun}.c: |
| renamed USE_THREAD to WITH_THREAD |
| |
| * configure.in: add AC_PROG_INSTALL |
| |
| * README, Python/version.c: version set to 1.0.0 BETA 3 |
| |
| * Demo, Include, Lib: added Makefile with clean/clobber targets |
| |
| * README: added remarks on --with-svr4; unnumber special cases |
| |
| * configure.in: only look for -lnsl and -lsocket if --with-svr4 is |
| specified, to avoid linking with them on IRIX 5 |
| |
| ======================================================================== |
| Release of 1.0.0 BETA 2 (Jan 3 1994) |
| ======================================================================== |
| |
| Mon Jan 3 22:21:24 1994 Guido van Rossum (guido@voorn.cwi.nl) |
| |
| * Include/myselect.h: fix typo in name of SYS_SELECT_WITH_SYS_TIME |
| |
| * Parser/pgen.h: moved here from Include; removed extern |
| definition of 'gram' |
| |
| * Parser/acceler.c: include node.h, now needed by parser.h |
| |
| * README: added paragraph on testing |
| |
| * Misc/python.man: changed date and add 1994 copyright |
| |
| * Makefile: added test target |
| |
| * Python/thread.c: include config.h if needed |
| |
| * Parser/parser.h: remove references to struct _grammar and |
| similar things |
| |
| * Modules/rotormodule.c (RTR_e_char, RTR_d_char): avoid warnings |
| by picky compilers about unsigned % signed |
| |
| * README: added a section on building it for non-UNIX systems |
| |
| * Makefile (configure): call autoheader when calling autoconf |
| |
| * Include/config.h.in: now generated by autoheader |
| |
| * acconfig.h: new file (input for autoheader) |
| |
| * configure.in: added AC_REVISION call to top |
| |
| * Modules/flmodule.c (form_setattr): one NULL should be 0 |
| |
| * Include/myselect.h: this now implies mytime.h and attempts to |
| work around systems where sys/select.h and sys/time.h can't be |
| included together |
| |
| * Modules/socketmodule.c, Doc/libsocket.tex: remove socket avail() |
| method -- you can use select instead |
| |
| * Modules/Setup: disable dbm, it is not truly portable |
| |
| * Lib/sunau.py: incorporate one-line fix by Sjoerd |
| |
| * Include/pgenheaders.h: include <stdlib.h> if its symbol |
| defined, not just on the mac |
| |
| * Include/grammar.h: remove redundant structure tags |
| |
| * Include/cgensupport.h: avoid possible macro argument |
| substitution inside string literal |
| |
| * configure.in, Include/config.h.in: add test whether sys/select.h |
| and sys/times.h can be included by the same program |
| |
| * Include/config.h.in: add lines for HAVE_SYS_UN_H and |
| HAVE_GETPEERNAME |
| |
| * Extensions/mkext.py: copy change in library order from |
| Modules/Makefile.in.in |
| |
| * Modules/Makefile.in.in: change library order subtly so -ltermcap |
| follows instead of precedes -lgl_s on SGI systems; this solves |
| (hides?) problems with clashing entry points |
| |
| * configure.in: added sys/un.h to list of tested header files; |
| added getpeername to list of tested functions (both for |
| Modules/socketmodule.c) |
| |
| * Modules/socketmodule.c: conditionally include sys/un.h and |
| change tests for AF_UNIX to tests for HAVE_SYS_UN_H; test for |
| HAVE_GETPEERNAME instead of NO_PEERNAME |
| |
| * Modules/config.c.in: add marshal and __main__ built-in modules |
| |
| * Python/sysmodule.c (list_builtin_module_names): sort the list |
| |
| * Doc/Makefile: remove 'qua' from default targets |
| |
| * Doc/README: add reference to ext.tex, change reference to |
| lib*.tex, explain that qua isn't built by default |
| |
| * README: explain DESTDIR, clarify install procedure, add more |
| explanation to some options, add description of ChangeLog, add |
| wuarchive.wustl.edu to list of mirror sites |
| |
| * Modules/socketmodule.c: make AF_UNIX code dependent on existence |
| of AF_UNIX (SCO ODT 3.0 doesn't support it -- let's hope it |
| doesn't define the symbol either) |
| |
| * Makefile: attempt to fix install targets (added separate |
| libinstall and maninstall) |
| |
| * Doc/libregex.tex: documented Tracy Tims' changes |
| |
| * Modules/regexpr.c: redid Tracy Tims' changes to minimize diffs |
| (only two added lines now) |
| |
| * Modules/regexmodule.c: fix core dump when asking a plain regex |
| object for a named group |
| |
| Sun Jan 2 23:10:44 1994 Guido van Rossum (guido@voorn.cwi.nl) |
| |
| * README, Python/version.c: changed version string to 1.0.0 BETA 2 |
| |
| * Modules/{regexpr.{c,h},regexmodule.c}: merged in Tracy Tims' |
| mods for named subexpressions |
| |
| * Include/regexpr.h: moved to Modules/regexpr.h |
| |
| * Modules/timingmodule.c: change tests for no arguments |
| |
| * configure.in: remove strtoul from AC_REPLACE_FUNCS; remove |
| initial blank line (which got copied into configure so it wouldn't |
| start with #!/bin/sh as required) |
| |
| * Python/compile.c: call mystrto(u)l instrad of strto(u)l |
| |
| * Python/Makefile.in: add mystrtoul.c to OBJS |
| |
| * Python/mystrtoul.c: renamed from strtol.c; renamed functions to |
| mystrto(u)l; this is now a standard source file (since some |
| systems have a strto(u)l that doesn't report errors properly) |
| |
| * Modules/Setup: added entry for timing module |
| |
| * Modules/{timing.h,timingmodule.c}: new files implementing GNN's |
| timing module |
| |
| ======================================================================== |
| Release of 1.0.0 BETA (Jan 1 1994) |
| ======================================================================== |