Trent Mick points out that the BSD DB also provides an ndbm compatibility
layer.  If that is available, consider that as an option as well.
diff --git a/configure b/configure
index 2038899..8421ddb 100755
--- a/configure
+++ b/configure
@@ -1,6 +1,6 @@
 #! /bin/sh
 
-# From configure.in Revision: 1.156 
+# From configure.in Revision: 1.157 
 
 # Guess values for system-dependent variables and create Makefiles.
 # Generated automatically using autoconf version 2.14.1 
@@ -1542,21 +1542,22 @@
 signal.h stdarg.h stddef.h stdlib.h thread.h unistd.h utime.h \
 sys/audioio.h sys/file.h sys/lock.h db_185.h db.h \
 sys/param.h sys/select.h sys/socket.h sys/time.h sys/times.h \
-sys/un.h sys/utsname.h sys/wait.h pty.h libutil.h ndbm.h gdbm/ndbm.h
+sys/un.h sys/utsname.h sys/wait.h pty.h libutil.h \
+ndbm.h db1/ndbm.h gdbm/ndbm.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1550: checking for $ac_hdr" >&5
+echo "configure:1551: checking for $ac_hdr" >&5
 if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1555 "configure"
+#line 1556 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1560: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1561: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -1587,12 +1588,12 @@
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
-echo "configure:1591: checking for $ac_hdr that defines DIR" >&5
+echo "configure:1592: checking for $ac_hdr that defines DIR" >&5
 if eval "test \"\${ac_cv_header_dirent_$ac_safe+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1596 "configure"
+#line 1597 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <$ac_hdr>
@@ -1600,7 +1601,7 @@
 DIR *dirp = 0;
 ; return 0; }
 EOF
-if { (eval echo configure:1604: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1605: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   eval "ac_cv_header_dirent_$ac_safe=yes"
 else
@@ -1625,7 +1626,7 @@
 # Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
 if test $ac_header_dirent = dirent.h; then
 echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
-echo "configure:1629: checking for opendir in -ldir" >&5
+echo "configure:1630: checking for opendir in -ldir" >&5
 ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
 if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1633,7 +1634,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-ldir  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 1637 "configure"
+#line 1638 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -1644,7 +1645,7 @@
 opendir()
 ; return 0; }
 EOF
-if { (eval echo configure:1648: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1649: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -1666,7 +1667,7 @@
 
 else
 echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
-echo "configure:1670: checking for opendir in -lx" >&5
+echo "configure:1671: checking for opendir in -lx" >&5
 ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
 if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1674,7 +1675,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-lx  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 1678 "configure"
+#line 1679 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -1685,7 +1686,7 @@
 opendir()
 ; return 0; }
 EOF
-if { (eval echo configure:1689: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1690: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -1711,9 +1712,9 @@
 # checks for typedefs
 was_it_defined=no
 echo $ac_n "checking for clock_t in time.h""... $ac_c" 1>&6
-echo "configure:1715: checking for clock_t in time.h" >&5
+echo "configure:1716: checking for clock_t in time.h" >&5
 cat > conftest.$ac_ext <<EOF
-#line 1717 "configure"
+#line 1718 "configure"
 #include "confdefs.h"
 #include <time.h>
 EOF
@@ -1741,12 +1742,12 @@
 
 # Type availability checks
 echo $ac_n "checking for mode_t""... $ac_c" 1>&6
-echo "configure:1745: checking for mode_t" >&5
+echo "configure:1746: checking for mode_t" >&5
 if eval "test \"\${ac_cv_type_mode_t+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1750 "configure"
+#line 1751 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -1776,12 +1777,12 @@
 fi
 
 echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:1780: checking for off_t" >&5
+echo "configure:1781: checking for off_t" >&5
 if eval "test \"\${ac_cv_type_off_t+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1785 "configure"
+#line 1786 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -1811,12 +1812,12 @@
 fi
 
 echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:1815: checking for pid_t" >&5
+echo "configure:1816: checking for pid_t" >&5
 if eval "test \"\${ac_cv_type_pid_t+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1820 "configure"
+#line 1821 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -1846,12 +1847,12 @@
 fi
 
 echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
-echo "configure:1850: checking return type of signal handlers" >&5
+echo "configure:1851: checking return type of signal handlers" >&5
 if eval "test \"\${ac_cv_type_signal+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1855 "configure"
+#line 1856 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <signal.h>
@@ -1868,7 +1869,7 @@
 int i;
 ; return 0; }
 EOF
-if { (eval echo configure:1872: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1873: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_type_signal=void
 else
@@ -1887,12 +1888,12 @@
 
 
 echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:1891: checking for size_t" >&5
+echo "configure:1892: checking for size_t" >&5
 if eval "test \"\${ac_cv_type_size_t+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1896 "configure"
+#line 1897 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -1922,12 +1923,12 @@
 fi
 
 echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:1926: checking for uid_t in sys/types.h" >&5
+echo "configure:1927: checking for uid_t in sys/types.h" >&5
 if eval "test \"\${ac_cv_type_uid_t+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1931 "configure"
+#line 1932 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 EOF
@@ -1958,7 +1959,7 @@
 
 # Sizes of various common basic types
 echo $ac_n "checking size of int""... $ac_c" 1>&6
-echo "configure:1962: checking size of int" >&5
+echo "configure:1963: checking size of int" >&5
 if eval "test \"\${ac_cv_sizeof_int+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1966,7 +1967,7 @@
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 1970 "configure"
+#line 1971 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 main()
@@ -1977,7 +1978,7 @@
   exit(0);
 }
 EOF
-if { (eval echo configure:1981: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1982: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_sizeof_int=`cat conftestval`
 else
@@ -1997,7 +1998,7 @@
 
 
 echo $ac_n "checking size of long""... $ac_c" 1>&6
-echo "configure:2001: checking size of long" >&5
+echo "configure:2002: checking size of long" >&5
 if eval "test \"\${ac_cv_sizeof_long+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2005,7 +2006,7 @@
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 2009 "configure"
+#line 2010 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 main()
@@ -2016,7 +2017,7 @@
   exit(0);
 }
 EOF
-if { (eval echo configure:2020: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2021: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_sizeof_long=`cat conftestval`
 else
@@ -2036,7 +2037,7 @@
 
 
 echo $ac_n "checking size of void *""... $ac_c" 1>&6
-echo "configure:2040: checking size of void *" >&5
+echo "configure:2041: checking size of void *" >&5
 if eval "test \"\${ac_cv_sizeof_void_p+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2044,7 +2045,7 @@
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 2048 "configure"
+#line 2049 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 main()
@@ -2055,7 +2056,7 @@
   exit(0);
 }
 EOF
-if { (eval echo configure:2059: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2060: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_sizeof_void_p=`cat conftestval`
 else
@@ -2075,7 +2076,7 @@
 
 
 echo $ac_n "checking size of char""... $ac_c" 1>&6
-echo "configure:2079: checking size of char" >&5
+echo "configure:2080: checking size of char" >&5
 if eval "test \"\${ac_cv_sizeof_char+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2083,7 +2084,7 @@
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 2087 "configure"
+#line 2088 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 main()
@@ -2094,7 +2095,7 @@
   exit(0);
 }
 EOF
-if { (eval echo configure:2098: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2099: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_sizeof_char=`cat conftestval`
 else
@@ -2114,7 +2115,7 @@
 
 
 echo $ac_n "checking size of short""... $ac_c" 1>&6
-echo "configure:2118: checking size of short" >&5
+echo "configure:2119: checking size of short" >&5
 if eval "test \"\${ac_cv_sizeof_short+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2122,7 +2123,7 @@
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 2126 "configure"
+#line 2127 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 main()
@@ -2133,7 +2134,7 @@
   exit(0);
 }
 EOF
-if { (eval echo configure:2137: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2138: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_sizeof_short=`cat conftestval`
 else
@@ -2153,7 +2154,7 @@
 
 
 echo $ac_n "checking size of float""... $ac_c" 1>&6
-echo "configure:2157: checking size of float" >&5
+echo "configure:2158: checking size of float" >&5
 if eval "test \"\${ac_cv_sizeof_float+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2161,7 +2162,7 @@
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 2165 "configure"
+#line 2166 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 main()
@@ -2172,7 +2173,7 @@
   exit(0);
 }
 EOF
-if { (eval echo configure:2176: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2177: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_sizeof_float=`cat conftestval`
 else
@@ -2192,7 +2193,7 @@
 
 
 echo $ac_n "checking size of double""... $ac_c" 1>&6
-echo "configure:2196: checking size of double" >&5
+echo "configure:2197: checking size of double" >&5
 if eval "test \"\${ac_cv_sizeof_double+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2200,7 +2201,7 @@
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 2204 "configure"
+#line 2205 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 main()
@@ -2211,7 +2212,7 @@
   exit(0);
 }
 EOF
-if { (eval echo configure:2215: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2216: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_sizeof_double=`cat conftestval`
 else
@@ -2231,7 +2232,7 @@
 
 
 echo $ac_n "checking size of fpos_t""... $ac_c" 1>&6
-echo "configure:2235: checking size of fpos_t" >&5
+echo "configure:2236: checking size of fpos_t" >&5
 if eval "test \"\${ac_cv_sizeof_fpos_t+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2239,7 +2240,7 @@
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 2243 "configure"
+#line 2244 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 main()
@@ -2250,7 +2251,7 @@
   exit(0);
 }
 EOF
-if { (eval echo configure:2254: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2255: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_sizeof_fpos_t=`cat conftestval`
 else
@@ -2271,17 +2272,17 @@
 
 
 echo $ac_n "checking for long long support""... $ac_c" 1>&6
-echo "configure:2275: checking for long long support" >&5
+echo "configure:2276: checking for long long support" >&5
 have_long_long=no
 cat > conftest.$ac_ext <<EOF
-#line 2278 "configure"
+#line 2279 "configure"
 #include "confdefs.h"
 
 int main() {
 long long x; x = (long long)0;
 ; return 0; }
 EOF
-if { (eval echo configure:2285: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2286: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   cat >> confdefs.h <<\EOF
 #define HAVE_LONG_LONG 1
@@ -2295,7 +2296,7 @@
 echo "$ac_t""$have_long_long" 1>&6
 if test "$have_long_long" = yes ; then
 echo $ac_n "checking size of long long""... $ac_c" 1>&6
-echo "configure:2299: checking size of long long" >&5
+echo "configure:2300: checking size of long long" >&5
 if eval "test \"\${ac_cv_sizeof_long_long+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2303,7 +2304,7 @@
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 2307 "configure"
+#line 2308 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 main()
@@ -2314,7 +2315,7 @@
   exit(0);
 }
 EOF
-if { (eval echo configure:2318: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2319: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_sizeof_long_long=`cat conftestval`
 else
@@ -2336,17 +2337,17 @@
 fi
 
 echo $ac_n "checking for uintptr_t support""... $ac_c" 1>&6
-echo "configure:2340: checking for uintptr_t support" >&5
+echo "configure:2341: checking for uintptr_t support" >&5
 have_uintptr_t=no
 cat > conftest.$ac_ext <<EOF
-#line 2343 "configure"
+#line 2344 "configure"
 #include "confdefs.h"
 
 int main() {
 uintptr_t x; x = (uintptr_t)0;
 ; return 0; }
 EOF
-if { (eval echo configure:2350: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2351: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   cat >> confdefs.h <<\EOF
 #define HAVE_UINTPTR_T 1
@@ -2360,7 +2361,7 @@
 echo "$ac_t""$have_uintptr_t" 1>&6
 if test "$have_uintptr_t" = yes ; then
 echo $ac_n "checking size of uintptr_t""... $ac_c" 1>&6
-echo "configure:2364: checking size of uintptr_t" >&5
+echo "configure:2365: checking size of uintptr_t" >&5
 if eval "test \"\${ac_cv_sizeof_uintptr_t+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2368,7 +2369,7 @@
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 2372 "configure"
+#line 2373 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 main()
@@ -2379,7 +2380,7 @@
   exit(0);
 }
 EOF
-if { (eval echo configure:2383: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2384: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_sizeof_uintptr_t=`cat conftestval`
 else
@@ -2402,7 +2403,7 @@
 
 # Hmph. AC_CHECK_SIZEOF() doesn't include <sys/types.h>.
 echo $ac_n "checking size of off_t""... $ac_c" 1>&6
-echo "configure:2406: checking size of off_t" >&5
+echo "configure:2407: checking size of off_t" >&5
 if eval "test \"\${ac_cv_sizeof_off_t+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2410,7 +2411,7 @@
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 2414 "configure"
+#line 2415 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 #include <sys/types.h>
@@ -2422,7 +2423,7 @@
   exit(0);
 }
 EOF
-if { (eval echo configure:2426: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2427: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_sizeof_off_t=`cat conftestval`
 else
@@ -2444,7 +2445,7 @@
 
 
 echo $ac_n "checking whether to enable large file support""... $ac_c" 1>&6
-echo "configure:2448: checking whether to enable large file support" >&5
+echo "configure:2449: checking whether to enable large file support" >&5
 if test "$have_long_long" = yes -a \
 	"$ac_cv_sizeof_off_t" -gt "$ac_cv_sizeof_long" -a \
 	"$ac_cv_sizeof_long_long" -ge "$ac_cv_sizeof_off_t"; then
@@ -2459,7 +2460,7 @@
 
 # AC_CHECK_SIZEOF() doesn't include <time.h>.
 echo $ac_n "checking size of time_t""... $ac_c" 1>&6
-echo "configure:2463: checking size of time_t" >&5
+echo "configure:2464: checking size of time_t" >&5
 if eval "test \"\${ac_cv_sizeof_time_t+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2467,7 +2468,7 @@
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 2471 "configure"
+#line 2472 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 #include <time.h>
@@ -2479,7 +2480,7 @@
   exit(0);
 }
 EOF
-if { (eval echo configure:2483: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2484: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_sizeof_time_t=`cat conftestval`
 else
@@ -2503,17 +2504,17 @@
 
 # if have pthread_t then define SIZEOF_PTHREAD_T
 echo $ac_n "checking for pthread_t""... $ac_c" 1>&6
-echo "configure:2507: checking for pthread_t" >&5
+echo "configure:2508: checking for pthread_t" >&5
 have_pthread_t=no
 cat > conftest.$ac_ext <<EOF
-#line 2510 "configure"
+#line 2511 "configure"
 #include "confdefs.h"
 #include <pthread.h>
 int main() {
 pthread_t x; x = (pthread_t)0;
 ; return 0; }
 EOF
-if { (eval echo configure:2517: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2518: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   have_pthread_t=yes
 else
@@ -2525,7 +2526,7 @@
 if test "$have_pthread_t" = yes ; then
   # AC_CHECK_SIZEOF() doesn't include <pthread.h>.
   echo $ac_n "checking size of pthread_t""... $ac_c" 1>&6
-echo "configure:2529: checking size of pthread_t" >&5
+echo "configure:2530: checking size of pthread_t" >&5
   if eval "test \"\${ac_cv_sizeof_pthread_t+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2533,7 +2534,7 @@
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 2537 "configure"
+#line 2538 "configure"
 #include "confdefs.h"
 #include <stdio.h>
   #include <pthread.h>
@@ -2545,7 +2546,7 @@
     exit(0);
   }
 EOF
-if { (eval echo configure:2549: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2550: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_sizeof_pthread_t=`cat conftestval`
 else
@@ -2580,7 +2581,7 @@
 esac
 
 echo $ac_n "checking for --with-next-framework""... $ac_c" 1>&6
-echo "configure:2584: checking for --with-next-framework" >&5
+echo "configure:2585: checking for --with-next-framework" >&5
 if test "$with_next_framework"
 then
 	OPT="$OPT -fno-common"
@@ -2597,7 +2598,7 @@
 fi
 
 echo $ac_n "checking for --with-dyld""... $ac_c" 1>&6
-echo "configure:2601: checking for --with-dyld" >&5
+echo "configure:2602: checking for --with-dyld" >&5
 if test "$with_next_framework" -o "$with_dyld"
 then
 	if test "$with_dyld"
@@ -2623,7 +2624,7 @@
 # SO is the extension of shared libraries `(including the dot!)
 # -- usually .so, .sl on HP-UX
 echo $ac_n "checking SO""... $ac_c" 1>&6
-echo "configure:2627: checking SO" >&5
+echo "configure:2628: checking SO" >&5
 if test -z "$SO"
 then
 	case $ac_sys_system in
@@ -2637,7 +2638,7 @@
 # (Shared libraries in this instance are shared modules to be loaded into
 # Python, as opposed to building Python itself as a shared library.)
 echo $ac_n "checking LDSHARED""... $ac_c" 1>&6
-echo "configure:2641: checking LDSHARED" >&5
+echo "configure:2642: checking LDSHARED" >&5
 if test -z "$LDSHARED"
 then
 	case $ac_sys_system/$ac_sys_release in
@@ -2689,7 +2690,7 @@
 # CCSHARED are the C *flags* used to create objects to go into a shared
 # library (module) -- this is only needed for a few systems
 echo $ac_n "checking CCSHARED""... $ac_c" 1>&6
-echo "configure:2693: checking CCSHARED" >&5
+echo "configure:2694: checking CCSHARED" >&5
 if test -z "$CCSHARED"
 then
 	case $ac_sys_system/$ac_sys_release in
@@ -2713,7 +2714,7 @@
 # LINKFORSHARED are the flags passed to the $(CC) command that links
 # the python executable -- this is only needed for a few systems
 echo $ac_n "checking LINKFORSHARED""... $ac_c" 1>&6
-echo "configure:2717: checking LINKFORSHARED" >&5
+echo "configure:2718: checking LINKFORSHARED" >&5
 if test -z "$LINKFORSHARED"
 then
 	case $ac_sys_system/$ac_sys_release in
@@ -2748,7 +2749,7 @@
 
 # checks for libraries
 echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:2752: checking for dlopen in -ldl" >&5
+echo "configure:2753: checking for dlopen in -ldl" >&5
 ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
 if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2756,7 +2757,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-ldl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2760 "configure"
+#line 2761 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -2767,7 +2768,7 @@
 dlopen()
 ; return 0; }
 EOF
-if { (eval echo configure:2771: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2772: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -2795,7 +2796,7 @@
 fi
 	# Dynamic linking for SunOS/Solaris and SYSV
 echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
-echo "configure:2799: checking for shl_load in -ldld" >&5
+echo "configure:2800: checking for shl_load in -ldld" >&5
 ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
 if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2803,7 +2804,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-ldld  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2807 "configure"
+#line 2808 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -2814,7 +2815,7 @@
 shl_load()
 ; return 0; }
 EOF
-if { (eval echo configure:2818: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2819: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -2844,7 +2845,7 @@
 
 # Check for --with-pydebug
 echo $ac_n "checking for --with-pydebug""... $ac_c" 1>&6
-echo "configure:2848: checking for --with-pydebug" >&5
+echo "configure:2849: checking for --with-pydebug" >&5
 # Check whether --with-pydebug or --without-pydebug was given.
 if test "${with_pydebug+set}" = set; then
   withval="$with_pydebug"
@@ -2864,16 +2865,16 @@
 # checks for system dependent C++ extensions support
 case "$ac_sys_system" in
 	AIX*)	echo $ac_n "checking for genuine AIX C++ extensions support""... $ac_c" 1>&6
-echo "configure:2868: checking for genuine AIX C++ extensions support" >&5
+echo "configure:2869: checking for genuine AIX C++ extensions support" >&5
 		cat > conftest.$ac_ext <<EOF
-#line 2870 "configure"
+#line 2871 "configure"
 #include "confdefs.h"
 #include "/usr/lpp/xlC/include/load.h"
 int main() {
 loadAndInit("", 0, "")
 ; return 0; }
 EOF
-if { (eval echo configure:2877: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2878: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   cat >> confdefs.h <<\EOF
 #define AIX_GENUINE_CPLUSPLUS 1
@@ -2897,7 +2898,7 @@
 IRIX*) ;;
 *)
 echo $ac_n "checking for t_open in -lnsl""... $ac_c" 1>&6
-echo "configure:2901: checking for t_open in -lnsl" >&5
+echo "configure:2902: checking for t_open in -lnsl" >&5
 ac_lib_var=`echo nsl'_'t_open | sed 'y%./+-%__p_%'`
 if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2905,7 +2906,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-lnsl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2909 "configure"
+#line 2910 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -2916,7 +2917,7 @@
 t_open()
 ; return 0; }
 EOF
-if { (eval echo configure:2920: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2921: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -2937,7 +2938,7 @@
 fi
  # SVR4
 echo $ac_n "checking for socket in -lsocket""... $ac_c" 1>&6
-echo "configure:2941: checking for socket in -lsocket" >&5
+echo "configure:2942: checking for socket in -lsocket" >&5
 ac_lib_var=`echo socket'_'socket | sed 'y%./+-%__p_%'`
 if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2945,7 +2946,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-lsocket $LIBS $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2949 "configure"
+#line 2950 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -2956,7 +2957,7 @@
 socket()
 ; return 0; }
 EOF
-if { (eval echo configure:2960: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2961: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -2981,7 +2982,7 @@
 case "$ac_sys_system" in
 BeOS*)
 echo $ac_n "checking for socket in -lnet""... $ac_c" 1>&6
-echo "configure:2985: checking for socket in -lnet" >&5
+echo "configure:2986: checking for socket in -lnet" >&5
 ac_lib_var=`echo net'_'socket | sed 'y%./+-%__p_%'`
 if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2989,7 +2990,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-lnet $LIBS $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2993 "configure"
+#line 2994 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3000,7 +3001,7 @@
 socket()
 ; return 0; }
 EOF
-if { (eval echo configure:3004: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3005: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3024,7 +3025,7 @@
 esac
 
 echo $ac_n "checking for --with-libs""... $ac_c" 1>&6
-echo "configure:3028: checking for --with-libs" >&5
+echo "configure:3029: checking for --with-libs" >&5
 # Check whether --with-libs or --without-libs was given.
 if test "${with_libs+set}" = set; then
   withval="$with_libs"
@@ -3041,7 +3042,7 @@
 USE_THREAD_MODULE=""
 
 echo $ac_n "checking for --with-dec-threads""... $ac_c" 1>&6
-echo "configure:3045: checking for --with-dec-threads" >&5
+echo "configure:3046: checking for --with-dec-threads" >&5
 
 # Check whether --with-dec-threads or --without-dec-threads was given.
 if test "${with_dec_threads+set}" = set; then
@@ -3058,7 +3059,7 @@
 
 
 echo $ac_n "checking for --with-threads""... $ac_c" 1>&6
-echo "configure:3062: checking for --with-threads" >&5
+echo "configure:3063: checking for --with-threads" >&5
 # Check whether --with-threads or --without-threads was given.
 if test "${with_threads+set}" = set; then
   withval="$with_threads"
@@ -3096,17 +3097,17 @@
 
     ac_safe=`echo "mach/cthreads.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for mach/cthreads.h""... $ac_c" 1>&6
-echo "configure:3100: checking for mach/cthreads.h" >&5
+echo "configure:3101: checking for mach/cthreads.h" >&5
 if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3105 "configure"
+#line 3106 "configure"
 #include "confdefs.h"
 #include <mach/cthreads.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3110: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3111: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3135,7 +3136,7 @@
   echo "$ac_t""no" 1>&6
 
     echo $ac_n "checking for pthread_create in -lpthread""... $ac_c" 1>&6
-echo "configure:3139: checking for pthread_create in -lpthread" >&5
+echo "configure:3140: checking for pthread_create in -lpthread" >&5
 ac_lib_var=`echo pthread'_'pthread_create | sed 'y%./+-%__p_%'`
 if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3143,7 +3144,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-lpthread  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3147 "configure"
+#line 3148 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3154,7 +3155,7 @@
 pthread_create()
 ; return 0; }
 EOF
-if { (eval echo configure:3158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3159: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3183,12 +3184,12 @@
   echo "$ac_t""no" 1>&6
 
     echo $ac_n "checking for pthread_detach""... $ac_c" 1>&6
-echo "configure:3187: checking for pthread_detach" >&5
+echo "configure:3188: checking for pthread_detach" >&5
 if eval "test \"\${ac_cv_func_pthread_detach+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3192 "configure"
+#line 3193 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char pthread_detach(); below.  */
@@ -3212,7 +3213,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:3216: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3217: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_pthread_detach=yes"
 else
@@ -3240,17 +3241,17 @@
 
     ac_safe=`echo "kernel/OS.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for kernel/OS.h""... $ac_c" 1>&6
-echo "configure:3244: checking for kernel/OS.h" >&5
+echo "configure:3245: checking for kernel/OS.h" >&5
 if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3249 "configure"
+#line 3250 "configure"
 #include "confdefs.h"
 #include <kernel/OS.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3254: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3255: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3279,7 +3280,7 @@
   echo "$ac_t""no" 1>&6
 
     echo $ac_n "checking for pthread_create in -lpthreads""... $ac_c" 1>&6
-echo "configure:3283: checking for pthread_create in -lpthreads" >&5
+echo "configure:3284: checking for pthread_create in -lpthreads" >&5
 ac_lib_var=`echo pthreads'_'pthread_create | sed 'y%./+-%__p_%'`
 if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3287,7 +3288,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-lpthreads  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3291 "configure"
+#line 3292 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3298,7 +3299,7 @@
 pthread_create()
 ; return 0; }
 EOF
-if { (eval echo configure:3302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3303: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3327,7 +3328,7 @@
   echo "$ac_t""no" 1>&6
 
     echo $ac_n "checking for pthread_create in -lc_r""... $ac_c" 1>&6
-echo "configure:3331: checking for pthread_create in -lc_r" >&5
+echo "configure:3332: checking for pthread_create in -lc_r" >&5
 ac_lib_var=`echo c_r'_'pthread_create | sed 'y%./+-%__p_%'`
 if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3335,7 +3336,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-lc_r  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3339 "configure"
+#line 3340 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3346,7 +3347,7 @@
 pthread_create()
 ; return 0; }
 EOF
-if { (eval echo configure:3350: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3351: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3375,7 +3376,7 @@
   echo "$ac_t""no" 1>&6
 
     echo $ac_n "checking for __d6_pthread_create in -lthread""... $ac_c" 1>&6
-echo "configure:3379: checking for __d6_pthread_create in -lthread" >&5
+echo "configure:3380: checking for __d6_pthread_create in -lthread" >&5
 ac_lib_var=`echo thread'_'__d6_pthread_create | sed 'y%./+-%__p_%'`
 if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3383,7 +3384,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-lthread  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3387 "configure"
+#line 3388 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3394,7 +3395,7 @@
 __d6_pthread_create()
 ; return 0; }
 EOF
-if { (eval echo configure:3398: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3399: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3423,7 +3424,7 @@
   echo "$ac_t""no" 1>&6
 
     echo $ac_n "checking for pth_init in -lpth""... $ac_c" 1>&6
-echo "configure:3427: checking for pth_init in -lpth" >&5
+echo "configure:3428: checking for pth_init in -lpth" >&5
 ac_lib_var=`echo pth'_'pth_init | sed 'y%./+-%__p_%'`
 if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3431,7 +3432,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-lpth  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3435 "configure"
+#line 3436 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3442,7 +3443,7 @@
 pth_init()
 ; return 0; }
 EOF
-if { (eval echo configure:3446: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3447: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3471,7 +3472,7 @@
   echo "$ac_t""no" 1>&6
 
     echo $ac_n "checking for pthread_create in -lcma""... $ac_c" 1>&6
-echo "configure:3475: checking for pthread_create in -lcma" >&5
+echo "configure:3476: checking for pthread_create in -lcma" >&5
 ac_lib_var=`echo cma'_'pthread_create | sed 'y%./+-%__p_%'`
 if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3479,7 +3480,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-lcma  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3483 "configure"
+#line 3484 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3490,7 +3491,7 @@
 pthread_create()
 ; return 0; }
 EOF
-if { (eval echo configure:3494: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3495: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3540,7 +3541,7 @@
 
 
     echo $ac_n "checking for usconfig in -lmpc""... $ac_c" 1>&6
-echo "configure:3544: checking for usconfig in -lmpc" >&5
+echo "configure:3545: checking for usconfig in -lmpc" >&5
 ac_lib_var=`echo mpc'_'usconfig | sed 'y%./+-%__p_%'`
 if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3548,7 +3549,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-lmpc  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3552 "configure"
+#line 3553 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3559,7 +3560,7 @@
 usconfig()
 ; return 0; }
 EOF
-if { (eval echo configure:3563: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3564: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3586,7 +3587,7 @@
 fi
 
     echo $ac_n "checking for thr_create in -lthread""... $ac_c" 1>&6
-echo "configure:3590: checking for thr_create in -lthread" >&5
+echo "configure:3591: checking for thr_create in -lthread" >&5
 ac_lib_var=`echo thread'_'thr_create | sed 'y%./+-%__p_%'`
 if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3594,7 +3595,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-lthread  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3598 "configure"
+#line 3599 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3605,7 +3606,7 @@
 thr_create()
 ; return 0; }
 EOF
-if { (eval echo configure:3609: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3610: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3637,7 +3638,7 @@
 
 USE_GC_MODULE=""
 echo $ac_n "checking for --with-cycle-gc""... $ac_c" 1>&6
-echo "configure:3641: checking for --with-cycle-gc" >&5
+echo "configure:3642: checking for --with-cycle-gc" >&5
 # Check whether --with-cycle-gc or --without-cycle-gc was given.
 if test "${with_cycle_gc+set}" = set; then
   withval="$with_cycle_gc"
@@ -3664,7 +3665,7 @@
 
 USE_BSDDB_MODULE=""
 echo $ac_n "checking for --with-libdb""... $ac_c" 1>&6
-echo "configure:3668: checking for --with-libdb" >&5
+echo "configure:3669: checking for --with-libdb" >&5
 # Check whether --with-libdb or --without-libdb was given.
 if test "${with_libdb+set}" = set; then
   withval="$with_libdb"
@@ -3703,12 +3704,12 @@
     # check for libdb; BSD systems have the DB routines in libc  --tg
     
     echo $ac_n "checking for dbopen""... $ac_c" 1>&6
-echo "configure:3707: checking for dbopen" >&5
+echo "configure:3708: checking for dbopen" >&5
 if eval "test \"\${ac_cv_func_dbopen+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3712 "configure"
+#line 3713 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char dbopen(); below.  */
@@ -3732,7 +3733,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:3736: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3737: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_dbopen=yes"
 else
@@ -3750,7 +3751,7 @@
 else
   echo "$ac_t""no" 1>&6
 echo $ac_n "checking for dbopen in -ldb""... $ac_c" 1>&6
-echo "configure:3754: checking for dbopen in -ldb" >&5
+echo "configure:3755: checking for dbopen in -ldb" >&5
 ac_lib_var=`echo db'_'dbopen | sed 'y%./+-%__p_%'`
 if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3758,7 +3759,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-ldb  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3762 "configure"
+#line 3763 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3769,7 +3770,7 @@
 dbopen()
 ; return 0; }
 EOF
-if { (eval echo configure:3773: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3774: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3795,7 +3796,7 @@
 
 # Check for --with-wctype-functions
 echo $ac_n "checking for --with-wctype-functions""... $ac_c" 1>&6
-echo "configure:3799: checking for --with-wctype-functions" >&5
+echo "configure:3800: checking for --with-wctype-functions" >&5
 # Check whether --with-wctype-functions or --without-wctype-functions was given.
 if test "${with_wctype_functions+set}" = set; then
   withval="$with_wctype_functions"
@@ -3817,7 +3818,7 @@
 DLINCLDIR=/
 
 echo $ac_n "checking for --with-sgi-dl""... $ac_c" 1>&6
-echo "configure:3821: checking for --with-sgi-dl" >&5
+echo "configure:3822: checking for --with-sgi-dl" >&5
 # Check whether --with-sgi-dl or --without-sgi-dl was given.
 if test "${with_sgi_dl+set}" = set; then
   withval="$with_sgi_dl"
@@ -3841,7 +3842,7 @@
 
 
 echo $ac_n "checking for --with-dl-dld""... $ac_c" 1>&6
-echo "configure:3845: checking for --with-dl-dld" >&5
+echo "configure:3846: checking for --with-dl-dld" >&5
 # Check whether --with-dl-dld or --without-dl-dld was given.
 if test "${with_dl_dld+set}" = set; then
   withval="$with_dl_dld"
@@ -3870,12 +3871,12 @@
 for ac_func in dlopen
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3874: checking for $ac_func" >&5
+echo "configure:3875: checking for $ac_func" >&5
 if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3879 "configure"
+#line 3880 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3899,7 +3900,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:3903: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3904: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3928,7 +3929,7 @@
 # loading of modules.
 
 echo $ac_n "checking DYNLOADFILE""... $ac_c" 1>&6
-echo "configure:3932: checking DYNLOADFILE" >&5
+echo "configure:3933: checking DYNLOADFILE" >&5
 if test -z "$DYNLOADFILE"
 then
 	case $ac_sys_system/$ac_sys_release in
@@ -3969,12 +3970,12 @@
  truncate uname waitpid _getpty
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3973: checking for $ac_func" >&5
+echo "configure:3974: checking for $ac_func" >&5
 if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3978 "configure"
+#line 3979 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3998,7 +3999,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:4002: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4003: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4028,12 +4029,12 @@
 for ac_func in openpty
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4032: checking for $ac_func" >&5
+echo "configure:4033: checking for $ac_func" >&5
 if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4037 "configure"
+#line 4038 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -4057,7 +4058,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:4061: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4062: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4079,7 +4080,7 @@
 else
   echo "$ac_t""no" 1>&6
 echo $ac_n "checking for openpty in -lutil""... $ac_c" 1>&6
-echo "configure:4083: checking for openpty in -lutil" >&5
+echo "configure:4084: checking for openpty in -lutil" >&5
 ac_lib_var=`echo util'_'openpty | sed 'y%./+-%__p_%'`
 if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -4087,7 +4088,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-lutil  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4091 "configure"
+#line 4092 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -4098,7 +4099,7 @@
 openpty()
 ; return 0; }
 EOF
-if { (eval echo configure:4102: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4103: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -4127,12 +4128,12 @@
 for ac_func in forkpty
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4131: checking for $ac_func" >&5
+echo "configure:4132: checking for $ac_func" >&5
 if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4136 "configure"
+#line 4137 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -4156,7 +4157,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:4160: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4161: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4178,7 +4179,7 @@
 else
   echo "$ac_t""no" 1>&6
 echo $ac_n "checking for forkpty in -lutil""... $ac_c" 1>&6
-echo "configure:4182: checking for forkpty in -lutil" >&5
+echo "configure:4183: checking for forkpty in -lutil" >&5
 ac_lib_var=`echo util'_'forkpty | sed 'y%./+-%__p_%'`
 if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -4186,7 +4187,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-lutil  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4190 "configure"
+#line 4191 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -4197,7 +4198,7 @@
 forkpty()
 ; return 0; }
 EOF
-if { (eval echo configure:4201: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4202: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -4228,12 +4229,12 @@
 for ac_func in fseek64 fseeko fstatvfs ftell64 ftello statvfs
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4232: checking for $ac_func" >&5
+echo "configure:4233: checking for $ac_func" >&5
 if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4237 "configure"
+#line 4238 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -4257,7 +4258,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:4261: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4262: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4285,12 +4286,12 @@
 for ac_func in dup2 getcwd strdup strerror memmove
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4289: checking for $ac_func" >&5
+echo "configure:4290: checking for $ac_func" >&5
 if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4294 "configure"
+#line 4295 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -4314,7 +4315,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:4318: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4319: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4343,12 +4344,12 @@
 for ac_func in getpgrp
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4347: checking for $ac_func" >&5
+echo "configure:4348: checking for $ac_func" >&5
 if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4352 "configure"
+#line 4353 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -4372,7 +4373,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:4376: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4377: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4391,14 +4392,14 @@
 #define $ac_tr_func 1
 EOF
  cat > conftest.$ac_ext <<EOF
-#line 4395 "configure"
+#line 4396 "configure"
 #include "confdefs.h"
 #include <unistd.h>
 int main() {
 getpgrp(0);
 ; return 0; }
 EOF
-if { (eval echo configure:4402: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4403: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   cat >> confdefs.h <<\EOF
 #define GETPGRP_HAVE_ARG 1
@@ -4417,12 +4418,12 @@
 for ac_func in setpgrp
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4421: checking for $ac_func" >&5
+echo "configure:4422: checking for $ac_func" >&5
 if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4426 "configure"
+#line 4427 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -4446,7 +4447,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:4450: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4451: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4465,14 +4466,14 @@
 #define $ac_tr_func 1
 EOF
  cat > conftest.$ac_ext <<EOF
-#line 4469 "configure"
+#line 4470 "configure"
 #include "confdefs.h"
 #include <unistd.h>
 int main() {
 setpgrp(0,0);
 ; return 0; }
 EOF
-if { (eval echo configure:4476: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4477: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   cat >> confdefs.h <<\EOF
 #define SETPGRP_HAVE_ARG 1
@@ -4491,12 +4492,12 @@
 for ac_func in gettimeofday
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4495: checking for $ac_func" >&5
+echo "configure:4496: checking for $ac_func" >&5
 if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4500 "configure"
+#line 4501 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -4520,7 +4521,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:4524: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4525: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4539,14 +4540,14 @@
 #define $ac_tr_func 1
 EOF
  cat > conftest.$ac_ext <<EOF
-#line 4543 "configure"
+#line 4544 "configure"
 #include "confdefs.h"
 #include <sys/time.h>
 int main() {
 gettimeofday((struct timeval*)0,(struct timezone*)0);
 ; return 0; }
 EOF
-if { (eval echo configure:4550: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4551: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   :
 else
   echo "configure: failed program was:" >&5
@@ -4566,12 +4567,12 @@
 
 # checks for structures
 echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:4570: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:4571: checking whether time.h and sys/time.h may both be included" >&5
 if eval "test \"\${ac_cv_header_time+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4575 "configure"
+#line 4576 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/time.h>
@@ -4580,7 +4581,7 @@
 struct tm *tp;
 ; return 0; }
 EOF
-if { (eval echo configure:4584: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4585: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_header_time=yes
 else
@@ -4601,12 +4602,12 @@
 fi
 
 echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6
-echo "configure:4605: checking whether struct tm is in sys/time.h or time.h" >&5
+echo "configure:4606: checking whether struct tm is in sys/time.h or time.h" >&5
 if eval "test \"\${ac_cv_struct_tm+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4610 "configure"
+#line 4611 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <time.h>
@@ -4614,7 +4615,7 @@
 struct tm *tp; tp->tm_sec;
 ; return 0; }
 EOF
-if { (eval echo configure:4618: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4619: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_struct_tm=time.h
 else
@@ -4635,12 +4636,12 @@
 fi
 
 echo $ac_n "checking for member tm_zone in aggregate type struct tm""... $ac_c" 1>&6
-echo "configure:4639: checking for member tm_zone in aggregate type struct tm" >&5
+echo "configure:4640: checking for member tm_zone in aggregate type struct tm" >&5
 if eval "test \"\${ac_cv_c_struct_member_tm_zone+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4644 "configure"
+#line 4645 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <$ac_cv_struct_tm>
@@ -4648,7 +4649,7 @@
 struct tm foo; foo.tm_zone;
 ; return 0; }
 EOF
-if { (eval echo configure:4652: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4653: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_struct_member_tm_zone=yes
 else
@@ -4669,12 +4670,12 @@
 
 else
   echo $ac_n "checking for tzname""... $ac_c" 1>&6
-echo "configure:4673: checking for tzname" >&5
+echo "configure:4674: checking for tzname" >&5
 if eval "test \"\${ac_cv_var_tzname+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4678 "configure"
+#line 4679 "configure"
 #include "confdefs.h"
 #include <time.h>
 #ifndef tzname /* For SGI.  */
@@ -4684,7 +4685,7 @@
 atoi(*tzname);
 ; return 0; }
 EOF
-if { (eval echo configure:4688: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4689: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_var_tzname=yes
 else
@@ -4707,19 +4708,19 @@
 
 
 echo $ac_n "checking for time.h that defines altzone""... $ac_c" 1>&6
-echo "configure:4711: checking for time.h that defines altzone" >&5
+echo "configure:4712: checking for time.h that defines altzone" >&5
 if eval "test \"\${ac_cv_header_time_altzone+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4716 "configure"
+#line 4717 "configure"
 #include "confdefs.h"
 #include <time.h>
 int main() {
 return altzone;
 ; return 0; }
 EOF
-if { (eval echo configure:4723: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4724: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_header_time_altzone=yes
 else
@@ -4741,9 +4742,9 @@
 
 was_it_defined=no
 echo $ac_n "checking whether sys/select.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:4745: checking whether sys/select.h and sys/time.h may both be included" >&5
+echo "configure:4746: checking whether sys/select.h and sys/time.h may both be included" >&5
 cat > conftest.$ac_ext <<EOF
-#line 4747 "configure"
+#line 4748 "configure"
 #include "confdefs.h"
 
 #include <sys/types.h>
@@ -4754,7 +4755,7 @@
 ;
 ; return 0; }
 EOF
-if { (eval echo configure:4758: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4759: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   cat >> confdefs.h <<\EOF
 #define SYS_SELECT_WITH_SYS_TIME 1
@@ -4770,14 +4771,14 @@
 # checks for compiler characteristics
 
 echo $ac_n "checking whether char is unsigned""... $ac_c" 1>&6
-echo "configure:4774: checking whether char is unsigned" >&5
+echo "configure:4775: checking whether char is unsigned" >&5
 if eval "test \"\${ac_cv_c_char_unsigned+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test "$GCC" = yes; then
   # GCC predefines this symbol on systems where it applies.
 cat > conftest.$ac_ext <<EOF
-#line 4781 "configure"
+#line 4782 "configure"
 #include "confdefs.h"
 #ifdef __CHAR_UNSIGNED__
   yes
@@ -4799,7 +4800,7 @@
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 4803 "configure"
+#line 4804 "configure"
 #include "confdefs.h"
 /* volatile prevents gcc2 from optimizing the test away on sparcs.  */
 #if !defined(__STDC__) || __STDC__ != 1
@@ -4809,7 +4810,7 @@
   volatile char c = 255; exit(c < 0);
 }
 EOF
-if { (eval echo configure:4813: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4814: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_char_unsigned=yes
 else
@@ -4833,12 +4834,12 @@
 fi
 
 echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:4837: checking for working const" >&5
+echo "configure:4838: checking for working const" >&5
 if eval "test \"\${ac_cv_c_const+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4842 "configure"
+#line 4843 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -4887,7 +4888,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:4891: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4892: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_const=yes
 else
@@ -4908,21 +4909,21 @@
 fi
 
 echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:4912: checking for inline" >&5
+echo "configure:4913: checking for inline" >&5
 if eval "test \"\${ac_cv_c_inline+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
   cat > conftest.$ac_ext <<EOF
-#line 4919 "configure"
+#line 4920 "configure"
 #include "confdefs.h"
 
 int main() {
 } $ac_kw foo() {
 ; return 0; }
 EOF
-if { (eval echo configure:4926: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4927: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_inline=$ac_kw; break
 else
@@ -4950,16 +4951,16 @@
 
 works=no
 echo $ac_n "checking for working volatile""... $ac_c" 1>&6
-echo "configure:4954: checking for working volatile" >&5
+echo "configure:4955: checking for working volatile" >&5
 cat > conftest.$ac_ext <<EOF
-#line 4956 "configure"
+#line 4957 "configure"
 #include "confdefs.h"
 
 int main() {
 volatile int x; x = 0;
 ; return 0; }
 EOF
-if { (eval echo configure:4963: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4964: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   works=yes
 else
@@ -4976,16 +4977,16 @@
 
 works=no
 echo $ac_n "checking for working signed char""... $ac_c" 1>&6
-echo "configure:4980: checking for working signed char" >&5
+echo "configure:4981: checking for working signed char" >&5
 cat > conftest.$ac_ext <<EOF
-#line 4982 "configure"
+#line 4983 "configure"
 #include "confdefs.h"
 
 int main() {
 signed char c;
 ; return 0; }
 EOF
-if { (eval echo configure:4989: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4990: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   works=yes
 else
@@ -5002,16 +5003,16 @@
 
 have_prototypes=no
 echo $ac_n "checking for prototypes""... $ac_c" 1>&6
-echo "configure:5006: checking for prototypes" >&5
+echo "configure:5007: checking for prototypes" >&5
 cat > conftest.$ac_ext <<EOF
-#line 5008 "configure"
+#line 5009 "configure"
 #include "confdefs.h"
 int foo(int x) { return 0; }
 int main() {
 return foo(10);
 ; return 0; }
 EOF
-if { (eval echo configure:5015: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5016: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   cat >> confdefs.h <<\EOF
 #define HAVE_PROTOTYPES 1
@@ -5026,9 +5027,9 @@
 
 works=no
 echo $ac_n "checking for variable length prototypes and stdarg.h""... $ac_c" 1>&6
-echo "configure:5030: checking for variable length prototypes and stdarg.h" >&5
+echo "configure:5031: checking for variable length prototypes and stdarg.h" >&5
 cat > conftest.$ac_ext <<EOF
-#line 5032 "configure"
+#line 5033 "configure"
 #include "confdefs.h"
 
 #include <stdarg.h>
@@ -5045,7 +5046,7 @@
 return foo(10, "", 3.14);
 ; return 0; }
 EOF
-if { (eval echo configure:5049: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5050: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   cat >> confdefs.h <<\EOF
 #define HAVE_STDARG_PROTOTYPES 1
@@ -5061,16 +5062,16 @@
 if test "$have_prototypes" = yes; then
 bad_prototypes=no
 echo $ac_n "checking for bad exec* prototypes""... $ac_c" 1>&6
-echo "configure:5065: checking for bad exec* prototypes" >&5
+echo "configure:5066: checking for bad exec* prototypes" >&5
 cat > conftest.$ac_ext <<EOF
-#line 5067 "configure"
+#line 5068 "configure"
 #include "confdefs.h"
 #include <unistd.h>
 int main() {
 char **t;execve("@",t,t);
 ; return 0; }
 EOF
-if { (eval echo configure:5074: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5075: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   :
 else
   echo "configure: failed program was:" >&5
@@ -5087,12 +5088,12 @@
 
 bad_forward=no
 echo $ac_n "checking for bad static forward""... $ac_c" 1>&6
-echo "configure:5091: checking for bad static forward" >&5
+echo "configure:5092: checking for bad static forward" >&5
 if test "$cross_compiling" = yes; then
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 5096 "configure"
+#line 5097 "configure"
 #include "confdefs.h"
 
 struct s { int a; int b; };
@@ -5108,7 +5109,7 @@
 }
 
 EOF
-if { (eval echo configure:5112: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5113: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   :
 else
@@ -5127,9 +5128,9 @@
 
 va_list_is_array=no
 echo $ac_n "checking whether va_list is an array""... $ac_c" 1>&6
-echo "configure:5131: checking whether va_list is an array" >&5
+echo "configure:5132: checking whether va_list is an array" >&5
 cat > conftest.$ac_ext <<EOF
-#line 5133 "configure"
+#line 5134 "configure"
 #include "confdefs.h"
 
 #ifdef HAVE_STDARG_PROTOTYPES
@@ -5142,7 +5143,7 @@
 va_list list1, list2; list1 = list2;
 ; return 0; }
 EOF
-if { (eval echo configure:5146: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5147: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   :
 else
   echo "configure: failed program was:" >&5
@@ -5158,12 +5159,12 @@
 
 # sigh -- gethostbyname_r is a mess; it can have 3, 5 or 6 arguments :-(
 echo $ac_n "checking for gethostbyname_r""... $ac_c" 1>&6
-echo "configure:5162: checking for gethostbyname_r" >&5
+echo "configure:5163: checking for gethostbyname_r" >&5
 if eval "test \"\${ac_cv_func_gethostbyname_r+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5167 "configure"
+#line 5168 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char gethostbyname_r(); below.  */
@@ -5187,7 +5188,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:5191: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5192: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_gethostbyname_r=yes"
 else
@@ -5207,11 +5208,11 @@
 EOF
 
   echo $ac_n "checking gethostbyname_r with 6 args""... $ac_c" 1>&6
-echo "configure:5211: checking gethostbyname_r with 6 args" >&5
+echo "configure:5212: checking gethostbyname_r with 6 args" >&5
   OLD_CFLAGS=$CFLAGS
   CFLAGS="$CFLAGS $MY_CPPFLAGS $MY_THREAD_CPPFLAGS $MY_CFLAGS"
   cat > conftest.$ac_ext <<EOF
-#line 5215 "configure"
+#line 5216 "configure"
 #include "confdefs.h"
 
 #   include <netdb.h>
@@ -5228,7 +5229,7 @@
   
 ; return 0; }
 EOF
-if { (eval echo configure:5232: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5233: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   
     cat >> confdefs.h <<\EOF
@@ -5248,9 +5249,9 @@
   
     echo "$ac_t""no" 1>&6
     echo $ac_n "checking gethostbyname_r with 5 args""... $ac_c" 1>&6
-echo "configure:5252: checking gethostbyname_r with 5 args" >&5
+echo "configure:5253: checking gethostbyname_r with 5 args" >&5
     cat > conftest.$ac_ext <<EOF
-#line 5254 "configure"
+#line 5255 "configure"
 #include "confdefs.h"
 
 #     include <netdb.h>
@@ -5267,7 +5268,7 @@
     
 ; return 0; }
 EOF
-if { (eval echo configure:5271: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5272: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   
       cat >> confdefs.h <<\EOF
@@ -5287,9 +5288,9 @@
   
       echo "$ac_t""no" 1>&6
       echo $ac_n "checking gethostbyname_r with 3 args""... $ac_c" 1>&6
-echo "configure:5291: checking gethostbyname_r with 3 args" >&5
+echo "configure:5292: checking gethostbyname_r with 3 args" >&5
       cat > conftest.$ac_ext <<EOF
-#line 5293 "configure"
+#line 5294 "configure"
 #include "confdefs.h"
 
 #       include <netdb.h>
@@ -5304,7 +5305,7 @@
       
 ; return 0; }
 EOF
-if { (eval echo configure:5308: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5309: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   
         cat >> confdefs.h <<\EOF
@@ -5340,12 +5341,12 @@
   for ac_func in gethostbyname
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5344: checking for $ac_func" >&5
+echo "configure:5345: checking for $ac_func" >&5
 if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5349 "configure"
+#line 5350 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -5369,7 +5370,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:5373: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5374: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -5407,12 +5408,12 @@
 
 # Linux requires this for correct f.p. operations
 echo $ac_n "checking for __fpu_control""... $ac_c" 1>&6
-echo "configure:5411: checking for __fpu_control" >&5
+echo "configure:5412: checking for __fpu_control" >&5
 if eval "test \"\${ac_cv_func___fpu_control+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5416 "configure"
+#line 5417 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char __fpu_control(); below.  */
@@ -5436,7 +5437,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:5440: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5441: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func___fpu_control=yes"
 else
@@ -5454,7 +5455,7 @@
 else
   echo "$ac_t""no" 1>&6
 echo $ac_n "checking for __fpu_control in -lieee""... $ac_c" 1>&6
-echo "configure:5458: checking for __fpu_control in -lieee" >&5
+echo "configure:5459: checking for __fpu_control in -lieee" >&5
 ac_lib_var=`echo ieee'_'__fpu_control | sed 'y%./+-%__p_%'`
 if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -5462,7 +5463,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-lieee  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 5466 "configure"
+#line 5467 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -5473,7 +5474,7 @@
 __fpu_control()
 ; return 0; }
 EOF
-if { (eval echo configure:5477: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5478: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -5506,7 +5507,7 @@
 
 # Check for --with-fpectl
 echo $ac_n "checking for --with-fpectl""... $ac_c" 1>&6
-echo "configure:5510: checking for --with-fpectl" >&5
+echo "configure:5511: checking for --with-fpectl" >&5
 # Check whether --with-fpectl or --without-fpectl was given.
 if test "${with_fpectl+set}" = set; then
   withval="$with_fpectl"
@@ -5531,7 +5532,7 @@
 *) LIBM=-lm
 esac
 echo $ac_n "checking for --with-libm=STRING""... $ac_c" 1>&6
-echo "configure:5535: checking for --with-libm=STRING" >&5
+echo "configure:5536: checking for --with-libm=STRING" >&5
 # Check whether --with-libm or --without-libm was given.
 if test "${with_libm+set}" = set; then
   withval="$with_libm"
@@ -5552,7 +5553,7 @@
 # check for --with-libc=...
 
 echo $ac_n "checking for --with-libc=STRING""... $ac_c" 1>&6
-echo "configure:5556: checking for --with-libc=STRING" >&5
+echo "configure:5557: checking for --with-libc=STRING" >&5
 # Check whether --with-libc or --without-libc was given.
 if test "${with_libc+set}" = set; then
   withval="$with_libc"
@@ -5576,12 +5577,12 @@
 for ac_func in hypot
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5580: checking for $ac_func" >&5
+echo "configure:5581: checking for $ac_func" >&5
 if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5585 "configure"
+#line 5586 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -5605,7 +5606,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:5609: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5610: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -5635,7 +5636,7 @@
 
 # check for getopt
 echo $ac_n "checking for genuine getopt""... $ac_c" 1>&6
-echo "configure:5639: checking for genuine getopt" >&5
+echo "configure:5640: checking for genuine getopt" >&5
 if eval "test \"\${ac_cv_func_getopt+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5643,7 +5644,7 @@
   ac_cv_func_getopt=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 5647 "configure"
+#line 5648 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 extern int optind, opterr, getopt();
@@ -5655,7 +5656,7 @@
 	exit(0);
 }
 EOF
-if { (eval echo configure:5659: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5660: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_getopt=yes
 else
@@ -5673,7 +5674,7 @@
 
 # check whether malloc(0) returns NULL or not
 echo $ac_n "checking what malloc(0) returns""... $ac_c" 1>&6
-echo "configure:5677: checking what malloc(0) returns" >&5
+echo "configure:5678: checking what malloc(0) returns" >&5
 if eval "test \"\${ac_cv_malloc_zero+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5681,7 +5682,7 @@
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 5685 "configure"
+#line 5686 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 #ifdef HAVE_STDLIB
@@ -5700,7 +5701,7 @@
 	exit(0);
 }
 EOF
-if { (eval echo configure:5704: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5705: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_malloc_zero=nonnull
 else
@@ -5726,17 +5727,17 @@
 # check for wchar.h
 ac_safe=`echo "wchar.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for wchar.h""... $ac_c" 1>&6
-echo "configure:5730: checking for wchar.h" >&5
+echo "configure:5731: checking for wchar.h" >&5
 if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5735 "configure"
+#line 5736 "configure"
 #include "confdefs.h"
 #include <wchar.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5740: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5741: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -5766,12 +5767,12 @@
 # check for usable wchar_t
 usable_wchar_t="unkown"
 echo $ac_n "checking for usable wchar_t""... $ac_c" 1>&6
-echo "configure:5770: checking for usable wchar_t" >&5
+echo "configure:5771: checking for usable wchar_t" >&5
 if test "$cross_compiling" = yes; then
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 5775 "configure"
+#line 5776 "configure"
 #include "confdefs.h"
 
 #include "wchar.h"
@@ -5785,7 +5786,7 @@
 }
 
 EOF
-if { (eval echo configure:5789: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5790: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   cat >> confdefs.h <<\EOF
 #define HAVE_USABLE_WCHAR_T 1
@@ -5804,14 +5805,14 @@
 
 # check for endianness
 echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
-echo "configure:5808: checking whether byte ordering is bigendian" >&5
+echo "configure:5809: checking whether byte ordering is bigendian" >&5
 if eval "test \"\${ac_cv_c_bigendian+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_bigendian=unknown
 # See if sys/param.h defines the BYTE_ORDER macro.
 cat > conftest.$ac_ext <<EOF
-#line 5815 "configure"
+#line 5816 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/param.h>
@@ -5822,11 +5823,11 @@
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:5826: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5827: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   # It does; now see whether it defined to BIG_ENDIAN or not.
 cat > conftest.$ac_ext <<EOF
-#line 5830 "configure"
+#line 5831 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/param.h>
@@ -5837,7 +5838,7 @@
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:5841: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5842: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_bigendian=yes
 else
@@ -5857,7 +5858,7 @@
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 5861 "configure"
+#line 5862 "configure"
 #include "confdefs.h"
 main () {
   /* Are we little or big endian?  From Harbison&Steele.  */
@@ -5870,7 +5871,7 @@
   exit (u.c[sizeof (long) - 1] == 1);
 }
 EOF
-if { (eval echo configure:5874: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5875: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_bigendian=no
 else
@@ -5897,7 +5898,7 @@
 # Check whether right shifting a negative integer extends the sign bit
 # or fills with zeros (like the Cray J90, according to Tim Peters).
 echo $ac_n "checking whether right shift extends the sign bit""... $ac_c" 1>&6
-echo "configure:5901: checking whether right shift extends the sign bit" >&5
+echo "configure:5902: checking whether right shift extends the sign bit" >&5
 if eval "test \"\${ac_cv_rshift_extends_sign+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5906,7 +5907,7 @@
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 5910 "configure"
+#line 5911 "configure"
 #include "confdefs.h"
 
 int main()
@@ -5915,7 +5916,7 @@
 }
 
 EOF
-if { (eval echo configure:5919: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5920: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_rshift_extends_sign=yes
 else
@@ -5947,12 +5948,12 @@
 #endif
 EOF
 echo $ac_n "checking for socklen_t""... $ac_c" 1>&6
-echo "configure:5951: checking for socklen_t" >&5
+echo "configure:5952: checking for socklen_t" >&5
 if eval "test \"\${ac_cv_type_socklen_t+set}\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5956 "configure"
+#line 5957 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS