Recorded merge of revisions 81029 via svnmerge from
svn+ssh://pythondev@svn.python.org/python/trunk
........
r81029 | antoine.pitrou | 2010-05-09 16:46:46 +0200 (dim., 09 mai 2010) | 3 lines
Untabify C files. Will watch buildbots.
........
diff --git a/Modules/zlibmodule.c b/Modules/zlibmodule.c
index 0cb1e64..bb52fdc 100644
--- a/Modules/zlibmodule.c
+++ b/Modules/zlibmodule.c
@@ -28,12 +28,12 @@
static PyThread_type_lock zlib_lock = NULL; /* initialized on module load */
#define ENTER_ZLIB \
- Py_BEGIN_ALLOW_THREADS \
- PyThread_acquire_lock(zlib_lock, 1); \
- Py_END_ALLOW_THREADS
+ Py_BEGIN_ALLOW_THREADS \
+ PyThread_acquire_lock(zlib_lock, 1); \
+ Py_END_ALLOW_THREADS
#define LEAVE_ZLIB \
- PyThread_release_lock(zlib_lock);
+ PyThread_release_lock(zlib_lock);
#else
@@ -73,9 +73,9 @@
zlib_error(z_stream zst, int err, char *msg)
{
if (zst.msg == Z_NULL)
- PyErr_Format(ZlibError, "Error %d %s", err, msg);
+ PyErr_Format(ZlibError, "Error %d %s", err, msg);
else
- PyErr_Format(ZlibError, "Error %d %s: %.200s", err, msg, zst.msg);
+ PyErr_Format(ZlibError, "Error %d %s: %.200s", err, msg, zst.msg);
}
PyDoc_STRVAR(compressobj__doc__,
@@ -94,17 +94,17 @@
compobject *self;
self = PyObject_New(compobject, type);
if (self == NULL)
- return NULL;
+ return NULL;
self->is_initialised = 0;
self->unused_data = PyString_FromString("");
if (self->unused_data == NULL) {
- Py_DECREF(self);
- return NULL;
+ Py_DECREF(self);
+ return NULL;
}
self->unconsumed_tail = PyString_FromString("");
if (self->unconsumed_tail == NULL) {
- Py_DECREF(self);
- return NULL;
+ Py_DECREF(self);
+ return NULL;
}
return self;
}
@@ -124,15 +124,15 @@
/* require Python string object, optional 'level' arg */
if (!PyArg_ParseTuple(args, "s#|i:compress", &input, &length, &level))
- return NULL;
+ return NULL;
zst.avail_out = length + length/1000 + 12 + 1;
output = (Byte*)malloc(zst.avail_out);
if (output == NULL) {
- PyErr_SetString(PyExc_MemoryError,
- "Can't allocate memory to compress data");
- return NULL;
+ PyErr_SetString(PyExc_MemoryError,
+ "Can't allocate memory to compress data");
+ return NULL;
}
/* Past the point of no return. From here on out, we need to make sure
@@ -147,19 +147,19 @@
switch(err) {
case(Z_OK):
- break;
+ break;
case(Z_MEM_ERROR):
- PyErr_SetString(PyExc_MemoryError,
- "Out of memory while compressing data");
- goto error;
+ PyErr_SetString(PyExc_MemoryError,
+ "Out of memory while compressing data");
+ goto error;
case(Z_STREAM_ERROR):
- PyErr_SetString(ZlibError,
- "Bad compression level");
- goto error;
+ PyErr_SetString(ZlibError,
+ "Bad compression level");
+ goto error;
default:
deflateEnd(&zst);
- zlib_error(zst, err, "while compressing data");
- goto error;
+ zlib_error(zst, err, "while compressing data");
+ goto error;
}
Py_BEGIN_ALLOW_THREADS;
@@ -167,17 +167,17 @@
Py_END_ALLOW_THREADS;
if (err != Z_STREAM_END) {
- zlib_error(zst, err, "while compressing data");
- deflateEnd(&zst);
- goto error;
+ zlib_error(zst, err, "while compressing data");
+ deflateEnd(&zst);
+ goto error;
}
err=deflateEnd(&zst);
if (err == Z_OK)
- ReturnVal = PyString_FromStringAndSize((char *)output,
- zst.total_out);
+ ReturnVal = PyString_FromStringAndSize((char *)output,
+ zst.total_out);
else
- zlib_error(zst, err, "while finishing compression");
+ zlib_error(zst, err, "while finishing compression");
error:
free(output);
@@ -202,17 +202,17 @@
z_stream zst;
if (!PyArg_ParseTuple(args, "s#|in:decompress",
- &input, &length, &wsize, &r_strlen))
- return NULL;
+ &input, &length, &wsize, &r_strlen))
+ return NULL;
if (r_strlen <= 0)
- r_strlen = 1;
+ r_strlen = 1;
zst.avail_in = length;
zst.avail_out = r_strlen;
if (!(result_str = PyString_FromStringAndSize(NULL, r_strlen)))
- return NULL;
+ return NULL;
zst.zalloc = (alloc_func)NULL;
zst.zfree = (free_func)Z_NULL;
@@ -222,60 +222,60 @@
switch(err) {
case(Z_OK):
- break;
+ break;
case(Z_MEM_ERROR):
- PyErr_SetString(PyExc_MemoryError,
- "Out of memory while decompressing data");
- goto error;
+ PyErr_SetString(PyExc_MemoryError,
+ "Out of memory while decompressing data");
+ goto error;
default:
inflateEnd(&zst);
- zlib_error(zst, err, "while preparing to decompress data");
- goto error;
+ zlib_error(zst, err, "while preparing to decompress data");
+ goto error;
}
do {
- Py_BEGIN_ALLOW_THREADS
- err=inflate(&zst, Z_FINISH);
- Py_END_ALLOW_THREADS
+ Py_BEGIN_ALLOW_THREADS
+ err=inflate(&zst, Z_FINISH);
+ Py_END_ALLOW_THREADS
- switch(err) {
- case(Z_STREAM_END):
- break;
- case(Z_BUF_ERROR):
- /*
- * If there is at least 1 byte of room according to zst.avail_out
- * and we get this error, assume that it means zlib cannot
- * process the inflate call() due to an error in the data.
- */
- if (zst.avail_out > 0) {
- PyErr_Format(ZlibError, "Error %i while decompressing data",
- err);
- inflateEnd(&zst);
- goto error;
- }
- /* fall through */
- case(Z_OK):
- /* need more memory */
- if (_PyString_Resize(&result_str, r_strlen << 1) < 0) {
- inflateEnd(&zst);
- goto error;
- }
- zst.next_out = (unsigned char *)PyString_AS_STRING(result_str) \
- + r_strlen;
- zst.avail_out = r_strlen;
- r_strlen = r_strlen << 1;
- break;
- default:
- inflateEnd(&zst);
- zlib_error(zst, err, "while decompressing data");
- goto error;
- }
+ switch(err) {
+ case(Z_STREAM_END):
+ break;
+ case(Z_BUF_ERROR):
+ /*
+ * If there is at least 1 byte of room according to zst.avail_out
+ * and we get this error, assume that it means zlib cannot
+ * process the inflate call() due to an error in the data.
+ */
+ if (zst.avail_out > 0) {
+ PyErr_Format(ZlibError, "Error %i while decompressing data",
+ err);
+ inflateEnd(&zst);
+ goto error;
+ }
+ /* fall through */
+ case(Z_OK):
+ /* need more memory */
+ if (_PyString_Resize(&result_str, r_strlen << 1) < 0) {
+ inflateEnd(&zst);
+ goto error;
+ }
+ zst.next_out = (unsigned char *)PyString_AS_STRING(result_str) \
+ + r_strlen;
+ zst.avail_out = r_strlen;
+ r_strlen = r_strlen << 1;
+ break;
+ default:
+ inflateEnd(&zst);
+ zlib_error(zst, err, "while decompressing data");
+ goto error;
+ }
} while (err != Z_STREAM_END);
err = inflateEnd(&zst);
if (err != Z_OK) {
- zlib_error(zst, err, "while finishing data decompression");
- goto error;
+ zlib_error(zst, err, "while finishing data decompression");
+ goto error;
}
_PyString_Resize(&result_str, zst.total_out);
@@ -294,12 +294,12 @@
int wbits=MAX_WBITS, memLevel=DEF_MEM_LEVEL, strategy=0, err;
if (!PyArg_ParseTuple(args, "|iiiii:compressobj", &level, &method, &wbits,
- &memLevel, &strategy))
- return NULL;
+ &memLevel, &strategy))
+ return NULL;
self = newcompobject(&Comptype);
if (self==NULL)
- return(NULL);
+ return(NULL);
self->zst.zalloc = (alloc_func)NULL;
self->zst.zfree = (free_func)Z_NULL;
self->zst.next_in = NULL;
@@ -307,21 +307,21 @@
err = deflateInit2(&self->zst, level, method, wbits, memLevel, strategy);
switch(err) {
case (Z_OK):
- self->is_initialised = 1;
- return (PyObject*)self;
+ self->is_initialised = 1;
+ return (PyObject*)self;
case (Z_MEM_ERROR):
- Py_DECREF(self);
- PyErr_SetString(PyExc_MemoryError,
- "Can't allocate memory for compression object");
- return NULL;
- case(Z_STREAM_ERROR):
- Py_DECREF(self);
- PyErr_SetString(PyExc_ValueError, "Invalid initialization option");
- return NULL;
- default:
- zlib_error(self->zst, err, "while creating compression object");
Py_DECREF(self);
- return NULL;
+ PyErr_SetString(PyExc_MemoryError,
+ "Can't allocate memory for compression object");
+ return NULL;
+ case(Z_STREAM_ERROR):
+ Py_DECREF(self);
+ PyErr_SetString(PyExc_ValueError, "Invalid initialization option");
+ return NULL;
+ default:
+ zlib_error(self->zst, err, "while creating compression object");
+ Py_DECREF(self);
+ return NULL;
}
}
@@ -331,11 +331,11 @@
int wbits=DEF_WBITS, err;
compobject *self;
if (!PyArg_ParseTuple(args, "|i:decompressobj", &wbits))
- return NULL;
+ return NULL;
self = newcompobject(&Decomptype);
if (self == NULL)
- return(NULL);
+ return(NULL);
self->zst.zalloc = (alloc_func)NULL;
self->zst.zfree = (free_func)Z_NULL;
self->zst.next_in = NULL;
@@ -343,21 +343,21 @@
err = inflateInit2(&self->zst, wbits);
switch(err) {
case (Z_OK):
- self->is_initialised = 1;
- return (PyObject*)self;
+ self->is_initialised = 1;
+ return (PyObject*)self;
case(Z_STREAM_ERROR):
- Py_DECREF(self);
- PyErr_SetString(PyExc_ValueError, "Invalid initialization option");
- return NULL;
- case (Z_MEM_ERROR):
- Py_DECREF(self);
- PyErr_SetString(PyExc_MemoryError,
- "Can't allocate memory for decompression object");
- return NULL;
- default:
- zlib_error(self->zst, err, "while creating decompression object");
Py_DECREF(self);
- return NULL;
+ PyErr_SetString(PyExc_ValueError, "Invalid initialization option");
+ return NULL;
+ case (Z_MEM_ERROR):
+ Py_DECREF(self);
+ PyErr_SetString(PyExc_MemoryError,
+ "Can't allocate memory for decompression object");
+ return NULL;
+ default:
+ zlib_error(self->zst, err, "while creating decompression object");
+ Py_DECREF(self);
+ return NULL;
}
}
@@ -365,7 +365,7 @@
Comp_dealloc(compobject *self)
{
if (self->is_initialised)
- deflateEnd(&self->zst);
+ deflateEnd(&self->zst);
Py_XDECREF(self->unused_data);
Py_XDECREF(self->unconsumed_tail);
PyObject_Del(self);
@@ -375,7 +375,7 @@
Decomp_dealloc(compobject *self)
{
if (self->is_initialised)
- inflateEnd(&self->zst);
+ inflateEnd(&self->zst);
Py_XDECREF(self->unused_data);
Py_XDECREF(self->unconsumed_tail);
PyObject_Del(self);
@@ -399,10 +399,10 @@
unsigned long start_total_out;
if (!PyArg_ParseTuple(args, "s#:compress", &input, &inplen))
- return NULL;
+ return NULL;
if (!(RetVal = PyString_FromStringAndSize(NULL, length)))
- return NULL;
+ return NULL;
ENTER_ZLIB
@@ -419,16 +419,16 @@
/* while Z_OK and the output buffer is full, there might be more output,
so extend the output buffer and try again */
while (err == Z_OK && self->zst.avail_out == 0) {
- if (_PyString_Resize(&RetVal, length << 1) < 0)
- goto error;
- self->zst.next_out = (unsigned char *)PyString_AS_STRING(RetVal) \
- + length;
- self->zst.avail_out = length;
- length = length << 1;
+ if (_PyString_Resize(&RetVal, length << 1) < 0)
+ goto error;
+ self->zst.next_out = (unsigned char *)PyString_AS_STRING(RetVal) \
+ + length;
+ self->zst.avail_out = length;
+ length = length << 1;
- Py_BEGIN_ALLOW_THREADS
- err = deflate(&(self->zst), Z_NO_FLUSH);
- Py_END_ALLOW_THREADS
+ Py_BEGIN_ALLOW_THREADS
+ err = deflate(&(self->zst), Z_NO_FLUSH);
+ Py_END_ALLOW_THREADS
}
/* We will only get Z_BUF_ERROR if the output buffer was full but
there wasn't more output when we tried again, so it is not an error
@@ -436,10 +436,10 @@
*/
if (err != Z_OK && err != Z_BUF_ERROR) {
- zlib_error(self->zst, err, "while compressing");
- Py_DECREF(RetVal);
- RetVal = NULL;
- goto error;
+ zlib_error(self->zst, err, "while compressing");
+ Py_DECREF(RetVal);
+ RetVal = NULL;
+ goto error;
}
_PyString_Resize(&RetVal, self->zst.total_out - start_total_out);
@@ -469,19 +469,19 @@
unsigned long start_total_out;
if (!PyArg_ParseTuple(args, "s#|i:decompress", &input,
- &inplen, &max_length))
- return NULL;
+ &inplen, &max_length))
+ return NULL;
if (max_length < 0) {
- PyErr_SetString(PyExc_ValueError,
- "max_length must be greater than zero");
- return NULL;
+ PyErr_SetString(PyExc_ValueError,
+ "max_length must be greater than zero");
+ return NULL;
}
/* limit amount of data allocated to max_length */
if (max_length && length > max_length)
- length = max_length;
+ length = max_length;
if (!(RetVal = PyString_FromStringAndSize(NULL, length)))
- return NULL;
+ return NULL;
ENTER_ZLIB
@@ -499,40 +499,40 @@
So extend the output buffer and try again.
*/
while (err == Z_OK && self->zst.avail_out == 0) {
- /* If max_length set, don't continue decompressing if we've already
- reached the limit.
- */
- if (max_length && length >= max_length)
- break;
+ /* If max_length set, don't continue decompressing if we've already
+ reached the limit.
+ */
+ if (max_length && length >= max_length)
+ break;
- /* otherwise, ... */
- old_length = length;
- length = length << 1;
- if (max_length && length > max_length)
- length = max_length;
+ /* otherwise, ... */
+ old_length = length;
+ length = length << 1;
+ if (max_length && length > max_length)
+ length = max_length;
- if (_PyString_Resize(&RetVal, length) < 0)
- goto error;
- self->zst.next_out = (unsigned char *)PyString_AS_STRING(RetVal) \
- + old_length;
- self->zst.avail_out = length - old_length;
+ if (_PyString_Resize(&RetVal, length) < 0)
+ goto error;
+ self->zst.next_out = (unsigned char *)PyString_AS_STRING(RetVal) \
+ + old_length;
+ self->zst.avail_out = length - old_length;
- Py_BEGIN_ALLOW_THREADS
- err = inflate(&(self->zst), Z_SYNC_FLUSH);
- Py_END_ALLOW_THREADS
+ Py_BEGIN_ALLOW_THREADS
+ err = inflate(&(self->zst), Z_SYNC_FLUSH);
+ Py_END_ALLOW_THREADS
}
/* Not all of the compressed data could be accommodated in the output buffer
of specified size. Return the unconsumed tail in an attribute.*/
if(max_length) {
- Py_DECREF(self->unconsumed_tail);
- self->unconsumed_tail = PyString_FromStringAndSize((char *)self->zst.next_in,
- self->zst.avail_in);
- if(!self->unconsumed_tail) {
- Py_DECREF(RetVal);
- RetVal = NULL;
- goto error;
- }
+ Py_DECREF(self->unconsumed_tail);
+ self->unconsumed_tail = PyString_FromStringAndSize((char *)self->zst.next_in,
+ self->zst.avail_in);
+ if(!self->unconsumed_tail) {
+ Py_DECREF(RetVal);
+ RetVal = NULL;
+ goto error;
+ }
}
/* The end of the compressed data has been reached, so set the
@@ -542,22 +542,22 @@
preserved.
*/
if (err == Z_STREAM_END) {
- Py_XDECREF(self->unused_data); /* Free original empty string */
- self->unused_data = PyString_FromStringAndSize(
- (char *)self->zst.next_in, self->zst.avail_in);
- if (self->unused_data == NULL) {
- Py_DECREF(RetVal);
- goto error;
- }
- /* We will only get Z_BUF_ERROR if the output buffer was full
- but there wasn't more output when we tried again, so it is
- not an error condition.
- */
+ Py_XDECREF(self->unused_data); /* Free original empty string */
+ self->unused_data = PyString_FromStringAndSize(
+ (char *)self->zst.next_in, self->zst.avail_in);
+ if (self->unused_data == NULL) {
+ Py_DECREF(RetVal);
+ goto error;
+ }
+ /* We will only get Z_BUF_ERROR if the output buffer was full
+ but there wasn't more output when we tried again, so it is
+ not an error condition.
+ */
} else if (err != Z_OK && err != Z_BUF_ERROR) {
- zlib_error(self->zst, err, "while decompressing");
- Py_DECREF(RetVal);
- RetVal = NULL;
- goto error;
+ zlib_error(self->zst, err, "while decompressing");
+ Py_DECREF(RetVal);
+ RetVal = NULL;
+ goto error;
}
_PyString_Resize(&RetVal, self->zst.total_out - start_total_out);
@@ -585,16 +585,16 @@
unsigned long start_total_out;
if (!PyArg_ParseTuple(args, "|i:flush", &flushmode))
- return NULL;
+ return NULL;
/* Flushing with Z_NO_FLUSH is a no-op, so there's no point in
doing any work at all; just return an empty string. */
if (flushmode == Z_NO_FLUSH) {
- return PyString_FromStringAndSize(NULL, 0);
+ return PyString_FromStringAndSize(NULL, 0);
}
if (!(RetVal = PyString_FromStringAndSize(NULL, length)))
- return NULL;
+ return NULL;
ENTER_ZLIB
@@ -610,41 +610,41 @@
/* while Z_OK and the output buffer is full, there might be more output,
so extend the output buffer and try again */
while (err == Z_OK && self->zst.avail_out == 0) {
- if (_PyString_Resize(&RetVal, length << 1) < 0)
- goto error;
- self->zst.next_out = (unsigned char *)PyString_AS_STRING(RetVal) \
- + length;
- self->zst.avail_out = length;
- length = length << 1;
+ if (_PyString_Resize(&RetVal, length << 1) < 0)
+ goto error;
+ self->zst.next_out = (unsigned char *)PyString_AS_STRING(RetVal) \
+ + length;
+ self->zst.avail_out = length;
+ length = length << 1;
- Py_BEGIN_ALLOW_THREADS
- err = deflate(&(self->zst), flushmode);
- Py_END_ALLOW_THREADS
+ Py_BEGIN_ALLOW_THREADS
+ err = deflate(&(self->zst), flushmode);
+ Py_END_ALLOW_THREADS
}
/* If flushmode is Z_FINISH, we also have to call deflateEnd() to free
various data structures. Note we should only get Z_STREAM_END when
flushmode is Z_FINISH, but checking both for safety*/
if (err == Z_STREAM_END && flushmode == Z_FINISH) {
- err = deflateEnd(&(self->zst));
- if (err != Z_OK) {
- zlib_error(self->zst, err, "from deflateEnd()");
- Py_DECREF(RetVal);
- RetVal = NULL;
- goto error;
- }
- else
- self->is_initialised = 0;
+ err = deflateEnd(&(self->zst));
+ if (err != Z_OK) {
+ zlib_error(self->zst, err, "from deflateEnd()");
+ Py_DECREF(RetVal);
+ RetVal = NULL;
+ goto error;
+ }
+ else
+ self->is_initialised = 0;
- /* We will only get Z_BUF_ERROR if the output buffer was full
- but there wasn't more output when we tried again, so it is
- not an error condition.
- */
+ /* We will only get Z_BUF_ERROR if the output buffer was full
+ but there wasn't more output when we tried again, so it is
+ not an error condition.
+ */
} else if (err!=Z_OK && err!=Z_BUF_ERROR) {
- zlib_error(self->zst, err, "while flushing");
- Py_DECREF(RetVal);
- RetVal = NULL;
- goto error;
+ zlib_error(self->zst, err, "while flushing");
+ Py_DECREF(RetVal);
+ RetVal = NULL;
+ goto error;
}
_PyString_Resize(&RetVal, self->zst.total_out - start_total_out);
@@ -774,13 +774,13 @@
unsigned long start_total_out;
if (!PyArg_ParseTuple(args, "|i:flush", &length))
- return NULL;
+ return NULL;
if (length <= 0) {
- PyErr_SetString(PyExc_ValueError, "length must be greater than zero");
- return NULL;
+ PyErr_SetString(PyExc_ValueError, "length must be greater than zero");
+ return NULL;
}
if (!(retval = PyString_FromStringAndSize(NULL, length)))
- return NULL;
+ return NULL;
ENTER_ZLIB
@@ -796,29 +796,29 @@
/* while Z_OK and the output buffer is full, there might be more output,
so extend the output buffer and try again */
while ((err == Z_OK || err == Z_BUF_ERROR) && self->zst.avail_out == 0) {
- if (_PyString_Resize(&retval, length << 1) < 0)
- goto error;
- self->zst.next_out = (Byte *)PyString_AS_STRING(retval) + length;
- self->zst.avail_out = length;
- length = length << 1;
+ if (_PyString_Resize(&retval, length << 1) < 0)
+ goto error;
+ self->zst.next_out = (Byte *)PyString_AS_STRING(retval) + length;
+ self->zst.avail_out = length;
+ length = length << 1;
- Py_BEGIN_ALLOW_THREADS
- err = inflate(&(self->zst), Z_FINISH);
- Py_END_ALLOW_THREADS
+ Py_BEGIN_ALLOW_THREADS
+ err = inflate(&(self->zst), Z_FINISH);
+ Py_END_ALLOW_THREADS
}
/* If flushmode is Z_FINISH, we also have to call deflateEnd() to free
various data structures. Note we should only get Z_STREAM_END when
flushmode is Z_FINISH */
if (err == Z_STREAM_END) {
- err = inflateEnd(&(self->zst));
+ err = inflateEnd(&(self->zst));
self->is_initialised = 0;
- if (err != Z_OK) {
- zlib_error(self->zst, err, "from inflateEnd()");
- Py_DECREF(retval);
- retval = NULL;
- goto error;
- }
+ if (err != Z_OK) {
+ zlib_error(self->zst, err, "from inflateEnd()");
+ Py_DECREF(retval);
+ retval = NULL;
+ goto error;
+ }
}
_PyString_Resize(&retval, self->zst.total_out - start_total_out);
@@ -872,13 +872,13 @@
ENTER_ZLIB
if (strcmp(name, "unused_data") == 0) {
- Py_INCREF(self->unused_data);
- retval = self->unused_data;
+ Py_INCREF(self->unused_data);
+ retval = self->unused_data;
} else if (strcmp(name, "unconsumed_tail") == 0) {
- Py_INCREF(self->unconsumed_tail);
- retval = self->unconsumed_tail;
+ Py_INCREF(self->unconsumed_tail);
+ retval = self->unconsumed_tail;
} else
- retval = Py_FindMethod(Decomp_methods, (PyObject *)self, name);
+ retval = Py_FindMethod(Decomp_methods, (PyObject *)self, name);
LEAVE_ZLIB
@@ -899,7 +899,7 @@
int len, signed_val;
if (!PyArg_ParseTuple(args, "s#|I:adler32", &buf, &len, &adler32val))
- return NULL;
+ return NULL;
/* In Python 2.x we return a signed integer regardless of native platform
* long size (the 32bit unsigned long is treated as 32-bit signed and sign
* extended into a 64-bit long inside the integer object). 3.0 does the
@@ -922,7 +922,7 @@
int len, signed_val;
if (!PyArg_ParseTuple(args, "s#|I:crc32", &buf, &len, &crc32val))
- return NULL;
+ return NULL;
/* In Python 2.x we return a signed integer regardless of native platform
* long size (the 32bit unsigned long is treated as 32-bit signed and sign
* extended into a 64-bit long inside the integer object). 3.0 does the
@@ -1003,15 +1003,15 @@
Py_TYPE(&Comptype) = &PyType_Type;
Py_TYPE(&Decomptype) = &PyType_Type;
m = Py_InitModule4("zlib", zlib_methods,
- zlib_module_documentation,
- (PyObject*)NULL,PYTHON_API_VERSION);
+ zlib_module_documentation,
+ (PyObject*)NULL,PYTHON_API_VERSION);
if (m == NULL)
- return;
+ return;
ZlibError = PyErr_NewException("zlib.error", NULL, NULL);
if (ZlibError != NULL) {
Py_INCREF(ZlibError);
- PyModule_AddObject(m, "error", ZlibError);
+ PyModule_AddObject(m, "error", ZlibError);
}
PyModule_AddIntConstant(m, "MAX_WBITS", MAX_WBITS);
PyModule_AddIntConstant(m, "DEFLATED", DEFLATED);
@@ -1030,7 +1030,7 @@
ver = PyString_FromString(ZLIB_VERSION);
if (ver != NULL)
- PyModule_AddObject(m, "ZLIB_VERSION", ver);
+ PyModule_AddObject(m, "ZLIB_VERSION", ver);
PyModule_AddStringConstant(m, "__version__", "1.0");