diff --git a/Objects/floatobject.c b/Objects/floatobject.c
index 2d00c16..c556de8f 100644
--- a/Objects/floatobject.c
+++ b/Objects/floatobject.c
@@ -25,13 +25,13 @@
 #endif
 
 /* Special free list -- see comments for same code in intobject.c. */
-#define BLOCK_SIZE	1000	/* 1K less typical malloc overhead */
-#define BHEAD_SIZE	8	/* Enough for a 64-bit pointer */
-#define N_FLOATOBJECTS	((BLOCK_SIZE - BHEAD_SIZE) / sizeof(PyFloatObject))
+#define BLOCK_SIZE      1000    /* 1K less typical malloc overhead */
+#define BHEAD_SIZE      8       /* Enough for a 64-bit pointer */
+#define N_FLOATOBJECTS  ((BLOCK_SIZE - BHEAD_SIZE) / sizeof(PyFloatObject))
 
 struct _floatblock {
-	struct _floatblock *next;
-	PyFloatObject objects[N_FLOATOBJECTS];
+    struct _floatblock *next;
+    PyFloatObject objects[N_FLOATOBJECTS];
 };
 
 typedef struct _floatblock PyFloatBlock;
@@ -42,31 +42,31 @@
 static PyFloatObject *
 fill_free_list(void)
 {
-	PyFloatObject *p, *q;
-	/* XXX Float blocks escape the object heap. Use PyObject_MALLOC ??? */
-	p = (PyFloatObject *) PyMem_MALLOC(sizeof(PyFloatBlock));
-	if (p == NULL)
-		return (PyFloatObject *) PyErr_NoMemory();
-	((PyFloatBlock *)p)->next = block_list;
-	block_list = (PyFloatBlock *)p;
-	p = &((PyFloatBlock *)p)->objects[0];
-	q = p + N_FLOATOBJECTS;
-	while (--q > p)
-		Py_TYPE(q) = (struct _typeobject *)(q-1);
-	Py_TYPE(q) = NULL;
-	return p + N_FLOATOBJECTS - 1;
+    PyFloatObject *p, *q;
+    /* XXX Float blocks escape the object heap. Use PyObject_MALLOC ??? */
+    p = (PyFloatObject *) PyMem_MALLOC(sizeof(PyFloatBlock));
+    if (p == NULL)
+        return (PyFloatObject *) PyErr_NoMemory();
+    ((PyFloatBlock *)p)->next = block_list;
+    block_list = (PyFloatBlock *)p;
+    p = &((PyFloatBlock *)p)->objects[0];
+    q = p + N_FLOATOBJECTS;
+    while (--q > p)
+        Py_TYPE(q) = (struct _typeobject *)(q-1);
+    Py_TYPE(q) = NULL;
+    return p + N_FLOATOBJECTS - 1;
 }
 
 double
 PyFloat_GetMax(void)
 {
-	return DBL_MAX;
+    return DBL_MAX;
 }
 
 double
 PyFloat_GetMin(void)
 {
-	return DBL_MIN;
+    return DBL_MIN;
 }
 
 static PyTypeObject FloatInfoType = {0, 0, 0, 0, 0, 0};
@@ -79,83 +79,83 @@
 your system's :file:`float.h` for more information.");
 
 static PyStructSequence_Field floatinfo_fields[] = {
-	{"max",		"DBL_MAX -- maximum representable finite float"},
-	{"max_exp",	"DBL_MAX_EXP -- maximum int e such that radix**(e-1) "
-			"is representable"},
-	{"max_10_exp",	"DBL_MAX_10_EXP -- maximum int e such that 10**e "
-			"is representable"},
-	{"min",		"DBL_MIN -- Minimum positive normalizer float"},
-	{"min_exp",	"DBL_MIN_EXP -- minimum int e such that radix**(e-1) "
-			"is a normalized float"},
-	{"min_10_exp",	"DBL_MIN_10_EXP -- minimum int e such that 10**e is "
-			"a normalized"},
-	{"dig",		"DBL_DIG -- digits"},
-	{"mant_dig",	"DBL_MANT_DIG -- mantissa digits"},
-	{"epsilon",	"DBL_EPSILON -- Difference between 1 and the next "
-			"representable float"},
-	{"radix",	"FLT_RADIX -- radix of exponent"},
-	{"rounds",	"FLT_ROUNDS -- addition rounds"},
-	{0}
+    {"max",             "DBL_MAX -- maximum representable finite float"},
+    {"max_exp",         "DBL_MAX_EXP -- maximum int e such that radix**(e-1) "
+                    "is representable"},
+    {"max_10_exp",      "DBL_MAX_10_EXP -- maximum int e such that 10**e "
+                    "is representable"},
+    {"min",             "DBL_MIN -- Minimum positive normalizer float"},
+    {"min_exp",         "DBL_MIN_EXP -- minimum int e such that radix**(e-1) "
+                    "is a normalized float"},
+    {"min_10_exp",      "DBL_MIN_10_EXP -- minimum int e such that 10**e is "
+                    "a normalized"},
+    {"dig",             "DBL_DIG -- digits"},
+    {"mant_dig",        "DBL_MANT_DIG -- mantissa digits"},
+    {"epsilon",         "DBL_EPSILON -- Difference between 1 and the next "
+                    "representable float"},
+    {"radix",           "FLT_RADIX -- radix of exponent"},
+    {"rounds",          "FLT_ROUNDS -- addition rounds"},
+    {0}
 };
 
 static PyStructSequence_Desc floatinfo_desc = {
-	"sys.floatinfo",	/* name */
-	floatinfo__doc__,	/* doc */
-	floatinfo_fields,	/* fields */
-	11
+    "sys.floatinfo",            /* name */
+    floatinfo__doc__,           /* doc */
+    floatinfo_fields,           /* fields */
+    11
 };
 
 PyObject *
 PyFloat_GetInfo(void)
 {
-	PyObject* floatinfo;
-	int pos = 0;
+    PyObject* floatinfo;
+    int pos = 0;
 
-	floatinfo = PyStructSequence_New(&FloatInfoType);
-	if (floatinfo == NULL) {
-		return NULL;
-	}
+    floatinfo = PyStructSequence_New(&FloatInfoType);
+    if (floatinfo == NULL) {
+        return NULL;
+    }
 
 #define SetIntFlag(flag) \
-	PyStructSequence_SET_ITEM(floatinfo, pos++, PyInt_FromLong(flag))
+    PyStructSequence_SET_ITEM(floatinfo, pos++, PyInt_FromLong(flag))
 #define SetDblFlag(flag) \
-	PyStructSequence_SET_ITEM(floatinfo, pos++, PyFloat_FromDouble(flag))
+    PyStructSequence_SET_ITEM(floatinfo, pos++, PyFloat_FromDouble(flag))
 
-	SetDblFlag(DBL_MAX);
-	SetIntFlag(DBL_MAX_EXP);
-	SetIntFlag(DBL_MAX_10_EXP);
-	SetDblFlag(DBL_MIN);
-	SetIntFlag(DBL_MIN_EXP);
-	SetIntFlag(DBL_MIN_10_EXP);
-	SetIntFlag(DBL_DIG);
-	SetIntFlag(DBL_MANT_DIG);
-	SetDblFlag(DBL_EPSILON);
-	SetIntFlag(FLT_RADIX);
-	SetIntFlag(FLT_ROUNDS);
+    SetDblFlag(DBL_MAX);
+    SetIntFlag(DBL_MAX_EXP);
+    SetIntFlag(DBL_MAX_10_EXP);
+    SetDblFlag(DBL_MIN);
+    SetIntFlag(DBL_MIN_EXP);
+    SetIntFlag(DBL_MIN_10_EXP);
+    SetIntFlag(DBL_DIG);
+    SetIntFlag(DBL_MANT_DIG);
+    SetDblFlag(DBL_EPSILON);
+    SetIntFlag(FLT_RADIX);
+    SetIntFlag(FLT_ROUNDS);
 #undef SetIntFlag
 #undef SetDblFlag
-	
-	if (PyErr_Occurred()) {
-		Py_CLEAR(floatinfo);
-		return NULL;
-	}
-	return floatinfo;
+
+    if (PyErr_Occurred()) {
+        Py_CLEAR(floatinfo);
+        return NULL;
+    }
+    return floatinfo;
 }
 
 PyObject *
 PyFloat_FromDouble(double fval)
 {
-	register PyFloatObject *op;
-	if (free_list == NULL) {
-		if ((free_list = fill_free_list()) == NULL)
-			return NULL;
-	}
-	/* Inline PyObject_New */
-	op = free_list;
-	free_list = (PyFloatObject *)Py_TYPE(op);
-	PyObject_INIT(op, &PyFloat_Type);
-	op->ob_fval = fval;
-	return (PyObject *) op;
+    register PyFloatObject *op;
+    if (free_list == NULL) {
+        if ((free_list = fill_free_list()) == NULL)
+            return NULL;
+    }
+    /* Inline PyObject_New */
+    op = free_list;
+    free_list = (PyFloatObject *)Py_TYPE(op);
+    PyObject_INIT(op, &PyFloat_Type);
+    op->ob_fval = fval;
+    return (PyObject *) op;
 }
 
 /**************************************************************************
@@ -177,163 +177,163 @@
 PyObject *
 PyFloat_FromString(PyObject *v, char **pend)
 {
-	const char *s, *last, *end, *sp;
-	double x;
-	char buffer[256]; /* for errors */
+    const char *s, *last, *end, *sp;
+    double x;
+    char buffer[256]; /* for errors */
 #ifdef Py_USING_UNICODE
-	char s_buffer[256]; /* for objects convertible to a char buffer */
+    char s_buffer[256]; /* for objects convertible to a char buffer */
 #endif
-	Py_ssize_t len;
+    Py_ssize_t len;
 
-	if (pend)
-		*pend = NULL;
-	if (PyString_Check(v)) {
-		s = PyString_AS_STRING(v);
-		len = PyString_GET_SIZE(v);
-	}
+    if (pend)
+        *pend = NULL;
+    if (PyString_Check(v)) {
+        s = PyString_AS_STRING(v);
+        len = PyString_GET_SIZE(v);
+    }
 #ifdef Py_USING_UNICODE
-	else if (PyUnicode_Check(v)) {
-		if (PyUnicode_GET_SIZE(v) >= (Py_ssize_t)sizeof(s_buffer)) {
-			PyErr_SetString(PyExc_ValueError,
-				"Unicode float() literal too long to convert");
-			return NULL;
-		}
-		if (PyUnicode_EncodeDecimal(PyUnicode_AS_UNICODE(v),
-					    PyUnicode_GET_SIZE(v),
-					    s_buffer,
-					    NULL))
-			return NULL;
-		s = s_buffer;
-		len = strlen(s);
-	}
+    else if (PyUnicode_Check(v)) {
+        if (PyUnicode_GET_SIZE(v) >= (Py_ssize_t)sizeof(s_buffer)) {
+            PyErr_SetString(PyExc_ValueError,
+                "Unicode float() literal too long to convert");
+            return NULL;
+        }
+        if (PyUnicode_EncodeDecimal(PyUnicode_AS_UNICODE(v),
+                                    PyUnicode_GET_SIZE(v),
+                                    s_buffer,
+                                    NULL))
+            return NULL;
+        s = s_buffer;
+        len = strlen(s);
+    }
 #endif
-	else if (PyObject_AsCharBuffer(v, &s, &len)) {
-		PyErr_SetString(PyExc_TypeError,
-				"float() argument must be a string or a number");
-		return NULL;
-	}
+    else if (PyObject_AsCharBuffer(v, &s, &len)) {
+        PyErr_SetString(PyExc_TypeError,
+                        "float() argument must be a string or a number");
+        return NULL;
+    }
 
-	last = s + len;
-	while (*s && isspace(Py_CHARMASK(*s)))
-		s++;
-	if (*s == '\0') {
-		PyErr_SetString(PyExc_ValueError, "empty string for float()");
-		return NULL;
-	}
-	sp = s;
-	/* We don't care about overflow or underflow.  If the platform supports
-	 * them, infinities and signed zeroes (on underflow) are fine.
-	 * However, strtod can return 0 for denormalized numbers, where atof
-	 * does not.  So (alas!) we special-case a zero result.  Note that
-	 * whether strtod sets errno on underflow is not defined, so we can't
-	 * key off errno.
-         */
-	PyFPE_START_PROTECT("strtod", return NULL)
-	x = PyOS_ascii_strtod(s, (char **)&end);
-	PyFPE_END_PROTECT(x)
-	errno = 0;
-	/* Believe it or not, Solaris 2.6 can move end *beyond* the null
-	   byte at the end of the string, when the input is inf(inity). */
-	if (end > last)
-		end = last;
-	/* Check for inf and nan. This is done late because it rarely happens. */
-	if (end == s) {
-		char *p = (char*)sp;
-		int sign = 1;
+    last = s + len;
+    while (*s && isspace(Py_CHARMASK(*s)))
+        s++;
+    if (*s == '\0') {
+        PyErr_SetString(PyExc_ValueError, "empty string for float()");
+        return NULL;
+    }
+    sp = s;
+    /* We don't care about overflow or underflow.  If the platform supports
+     * them, infinities and signed zeroes (on underflow) are fine.
+     * However, strtod can return 0 for denormalized numbers, where atof
+     * does not.  So (alas!) we special-case a zero result.  Note that
+     * whether strtod sets errno on underflow is not defined, so we can't
+     * key off errno.
+     */
+    PyFPE_START_PROTECT("strtod", return NULL)
+    x = PyOS_ascii_strtod(s, (char **)&end);
+    PyFPE_END_PROTECT(x)
+    errno = 0;
+    /* Believe it or not, Solaris 2.6 can move end *beyond* the null
+       byte at the end of the string, when the input is inf(inity). */
+    if (end > last)
+        end = last;
+    /* Check for inf and nan. This is done late because it rarely happens. */
+    if (end == s) {
+        char *p = (char*)sp;
+        int sign = 1;
 
-		if (*p == '-') {
-			sign = -1;
-			p++;
-		}
-		if (*p == '+') {
-			p++;
-		}
-		if (PyOS_strnicmp(p, "inf", 4) == 0) {
-			Py_RETURN_INF(sign);
-		}
-		if (PyOS_strnicmp(p, "infinity", 9) == 0) {
-			Py_RETURN_INF(sign);
-		}
+        if (*p == '-') {
+            sign = -1;
+            p++;
+        }
+        if (*p == '+') {
+            p++;
+        }
+        if (PyOS_strnicmp(p, "inf", 4) == 0) {
+            Py_RETURN_INF(sign);
+        }
+        if (PyOS_strnicmp(p, "infinity", 9) == 0) {
+            Py_RETURN_INF(sign);
+        }
 #ifdef Py_NAN
-		if(PyOS_strnicmp(p, "nan", 4) == 0) {
-			Py_RETURN_NAN;
-		}
+        if(PyOS_strnicmp(p, "nan", 4) == 0) {
+            Py_RETURN_NAN;
+        }
 #endif
-		PyOS_snprintf(buffer, sizeof(buffer),
-			      "invalid literal for float(): %.200s", s);
-		PyErr_SetString(PyExc_ValueError, buffer);
-		return NULL;
-	}
-	/* Since end != s, the platform made *some* kind of sense out
-	   of the input.  Trust it. */
-	while (*end && isspace(Py_CHARMASK(*end)))
-		end++;
-	if (*end != '\0') {
-		PyOS_snprintf(buffer, sizeof(buffer),
-			      "invalid literal for float(): %.200s", s);
-		PyErr_SetString(PyExc_ValueError, buffer);
-		return NULL;
-	}
-	else if (end != last) {
-		PyErr_SetString(PyExc_ValueError,
-				"null byte in argument for float()");
-		return NULL;
-	}
-	if (x == 0.0) {
-		/* See above -- may have been strtod being anal
-		   about denorms. */
-		PyFPE_START_PROTECT("atof", return NULL)
-		x = PyOS_ascii_atof(s);
-		PyFPE_END_PROTECT(x)
-		errno = 0;    /* whether atof ever set errno is undefined */
-	}
-	return PyFloat_FromDouble(x);
+        PyOS_snprintf(buffer, sizeof(buffer),
+                      "invalid literal for float(): %.200s", s);
+        PyErr_SetString(PyExc_ValueError, buffer);
+        return NULL;
+    }
+    /* Since end != s, the platform made *some* kind of sense out
+       of the input.  Trust it. */
+    while (*end && isspace(Py_CHARMASK(*end)))
+        end++;
+    if (*end != '\0') {
+        PyOS_snprintf(buffer, sizeof(buffer),
+                      "invalid literal for float(): %.200s", s);
+        PyErr_SetString(PyExc_ValueError, buffer);
+        return NULL;
+    }
+    else if (end != last) {
+        PyErr_SetString(PyExc_ValueError,
+                        "null byte in argument for float()");
+        return NULL;
+    }
+    if (x == 0.0) {
+        /* See above -- may have been strtod being anal
+           about denorms. */
+        PyFPE_START_PROTECT("atof", return NULL)
+        x = PyOS_ascii_atof(s);
+        PyFPE_END_PROTECT(x)
+        errno = 0;    /* whether atof ever set errno is undefined */
+    }
+    return PyFloat_FromDouble(x);
 }
 
 static void
 float_dealloc(PyFloatObject *op)
 {
-	if (PyFloat_CheckExact(op)) {
-		Py_TYPE(op) = (struct _typeobject *)free_list;
-		free_list = op;
-	}
-	else
-		Py_TYPE(op)->tp_free((PyObject *)op);
+    if (PyFloat_CheckExact(op)) {
+        Py_TYPE(op) = (struct _typeobject *)free_list;
+        free_list = op;
+    }
+    else
+        Py_TYPE(op)->tp_free((PyObject *)op);
 }
 
 double
 PyFloat_AsDouble(PyObject *op)
 {
-	PyNumberMethods *nb;
-	PyFloatObject *fo;
-	double val;
+    PyNumberMethods *nb;
+    PyFloatObject *fo;
+    double val;
 
-	if (op && PyFloat_Check(op))
-		return PyFloat_AS_DOUBLE((PyFloatObject*) op);
+    if (op && PyFloat_Check(op))
+        return PyFloat_AS_DOUBLE((PyFloatObject*) op);
 
-	if (op == NULL) {
-		PyErr_BadArgument();
-		return -1;
-	}
+    if (op == NULL) {
+        PyErr_BadArgument();
+        return -1;
+    }
 
-	if ((nb = Py_TYPE(op)->tp_as_number) == NULL || nb->nb_float == NULL) {
-		PyErr_SetString(PyExc_TypeError, "a float is required");
-		return -1;
-	}
+    if ((nb = Py_TYPE(op)->tp_as_number) == NULL || nb->nb_float == NULL) {
+        PyErr_SetString(PyExc_TypeError, "a float is required");
+        return -1;
+    }
 
-	fo = (PyFloatObject*) (*nb->nb_float) (op);
-	if (fo == NULL)
-		return -1;
-	if (!PyFloat_Check(fo)) {
-		PyErr_SetString(PyExc_TypeError,
-				"nb_float should return float object");
-		return -1;
-	}
+    fo = (PyFloatObject*) (*nb->nb_float) (op);
+    if (fo == NULL)
+        return -1;
+    if (!PyFloat_Check(fo)) {
+        PyErr_SetString(PyExc_TypeError,
+                        "nb_float should return float object");
+        return -1;
+    }
 
-	val = PyFloat_AS_DOUBLE(fo);
-	Py_DECREF(fo);
+    val = PyFloat_AS_DOUBLE(fo);
+    Py_DECREF(fo);
 
-	return val;
+    return val;
 }
 
 /* Methods */
@@ -341,58 +341,58 @@
 static void
 format_float(char *buf, size_t buflen, PyFloatObject *v, int precision)
 {
-	register char *cp;
-	char format[32];
-	int i;
+    register char *cp;
+    char format[32];
+    int i;
 
-	/* Subroutine for float_repr and float_print.
-	   We want float numbers to be recognizable as such,
-	   i.e., they should contain a decimal point or an exponent.
-	   However, %g may print the number as an integer;
-	   in such cases, we append ".0" to the string. */
+    /* Subroutine for float_repr and float_print.
+       We want float numbers to be recognizable as such,
+       i.e., they should contain a decimal point or an exponent.
+       However, %g may print the number as an integer;
+       in such cases, we append ".0" to the string. */
 
-	assert(PyFloat_Check(v));
-	PyOS_snprintf(format, 32, "%%.%ig", precision);
-	PyOS_ascii_formatd(buf, buflen, format, v->ob_fval);
-	cp = buf;
-	if (*cp == '-')
-		cp++;
-	for (; *cp != '\0'; cp++) {
-		/* Any non-digit means it's not an integer;
-		   this takes care of NAN and INF as well. */
-		if (!isdigit(Py_CHARMASK(*cp)))
-			break;
-	}
-	if (*cp == '\0') {
-		*cp++ = '.';
-		*cp++ = '0';
-		*cp++ = '\0';
-		return;
-	}
-	/* Checking the next three chars should be more than enough to
-	 * detect inf or nan, even on Windows. We check for inf or nan
-	 * at last because they are rare cases.
-	 */
-	for (i=0; *cp != '\0' && i<3; cp++, i++) {
-		if (isdigit(Py_CHARMASK(*cp)) || *cp == '.')
-			continue;
-		/* found something that is neither a digit nor point
-		 * it might be a NaN or INF
-		 */
+    assert(PyFloat_Check(v));
+    PyOS_snprintf(format, 32, "%%.%ig", precision);
+    PyOS_ascii_formatd(buf, buflen, format, v->ob_fval);
+    cp = buf;
+    if (*cp == '-')
+        cp++;
+    for (; *cp != '\0'; cp++) {
+        /* Any non-digit means it's not an integer;
+           this takes care of NAN and INF as well. */
+        if (!isdigit(Py_CHARMASK(*cp)))
+            break;
+    }
+    if (*cp == '\0') {
+        *cp++ = '.';
+        *cp++ = '0';
+        *cp++ = '\0';
+        return;
+    }
+    /* Checking the next three chars should be more than enough to
+     * detect inf or nan, even on Windows. We check for inf or nan
+     * at last because they are rare cases.
+     */
+    for (i=0; *cp != '\0' && i<3; cp++, i++) {
+        if (isdigit(Py_CHARMASK(*cp)) || *cp == '.')
+            continue;
+        /* found something that is neither a digit nor point
+         * it might be a NaN or INF
+         */
 #ifdef Py_NAN
-		if (Py_IS_NAN(v->ob_fval)) {
-			strcpy(buf, "nan");
-		}
-                else
+        if (Py_IS_NAN(v->ob_fval)) {
+            strcpy(buf, "nan");
+        }
+        else
 #endif
-		if (Py_IS_INFINITY(v->ob_fval)) {
-			cp = buf;
-			if (*cp == '-')
-				cp++;
-			strcpy(cp, "inf");
-		}
-		break;
-	}
+        if (Py_IS_INFINITY(v->ob_fval)) {
+            cp = buf;
+            if (*cp == '-')
+                cp++;
+            strcpy(cp, "inf");
+        }
+        break;
+    }
 
 }
 
@@ -403,7 +403,7 @@
 void
 PyFloat_AsStringEx(char *buf, PyFloatObject *v, int precision)
 {
-	format_float(buf, 100, v, precision);
+    format_float(buf, 100, v, precision);
 }
 
 /* Macro and helper that convert PyObject obj to a C double and store
@@ -413,33 +413,33 @@
    obj is not of float, int or long type, Py_NotImplemented is incref'ed,
    stored in obj, and returned from the function invoking this macro.
 */
-#define CONVERT_TO_DOUBLE(obj, dbl)			\
-	if (PyFloat_Check(obj))				\
-		dbl = PyFloat_AS_DOUBLE(obj);		\
-	else if (convert_to_double(&(obj), &(dbl)) < 0)	\
-		return obj;
+#define CONVERT_TO_DOUBLE(obj, dbl)                     \
+    if (PyFloat_Check(obj))                             \
+        dbl = PyFloat_AS_DOUBLE(obj);                   \
+    else if (convert_to_double(&(obj), &(dbl)) < 0)     \
+        return obj;
 
 static int
 convert_to_double(PyObject **v, double *dbl)
 {
-	register PyObject *obj = *v;
+    register PyObject *obj = *v;
 
-	if (PyInt_Check(obj)) {
-		*dbl = (double)PyInt_AS_LONG(obj);
-	}
-	else if (PyLong_Check(obj)) {
-		*dbl = PyLong_AsDouble(obj);
-		if (*dbl == -1.0 && PyErr_Occurred()) {
-			*v = NULL;
-			return -1;
-		}
-	}
-	else {
-		Py_INCREF(Py_NotImplemented);
-		*v = Py_NotImplemented;
-		return -1;
-	}
-	return 0;
+    if (PyInt_Check(obj)) {
+        *dbl = (double)PyInt_AS_LONG(obj);
+    }
+    else if (PyLong_Check(obj)) {
+        *dbl = PyLong_AsDouble(obj);
+        if (*dbl == -1.0 && PyErr_Occurred()) {
+            *v = NULL;
+            return -1;
+        }
+    }
+    else {
+        Py_INCREF(Py_NotImplemented);
+        *v = Py_NotImplemented;
+        return -1;
+    }
+    return 0;
 }
 
 /* Precisions used by repr() and str(), respectively.
@@ -456,8 +456,8 @@
 
 */
 
-#define PREC_REPR	17
-#define PREC_STR	12
+#define PREC_REPR       17
+#define PREC_STR        12
 
 /* XXX PyFloat_AsString and PyFloat_AsReprString should be deprecated:
    XXX they pass a char buffer without passing a length.
@@ -465,43 +465,43 @@
 void
 PyFloat_AsString(char *buf, PyFloatObject *v)
 {
-	format_float(buf, 100, v, PREC_STR);
+    format_float(buf, 100, v, PREC_STR);
 }
 
 void
 PyFloat_AsReprString(char *buf, PyFloatObject *v)
 {
-	format_float(buf, 100, v, PREC_REPR);
+    format_float(buf, 100, v, PREC_REPR);
 }
 
 /* ARGSUSED */
 static int
 float_print(PyFloatObject *v, FILE *fp, int flags)
 {
-	char buf[100];
-	format_float(buf, sizeof(buf), v,
-		     (flags & Py_PRINT_RAW) ? PREC_STR : PREC_REPR);
-	Py_BEGIN_ALLOW_THREADS
-	fputs(buf, fp);
-	Py_END_ALLOW_THREADS
-	return 0;
+    char buf[100];
+    format_float(buf, sizeof(buf), v,
+                 (flags & Py_PRINT_RAW) ? PREC_STR : PREC_REPR);
+    Py_BEGIN_ALLOW_THREADS
+    fputs(buf, fp);
+    Py_END_ALLOW_THREADS
+    return 0;
 }
 
 static PyObject *
 float_repr(PyFloatObject *v)
 {
-	char buf[100];
-	format_float(buf, sizeof(buf), v, PREC_REPR);
+    char buf[100];
+    format_float(buf, sizeof(buf), v, PREC_REPR);
 
-	return PyString_FromString(buf);
+    return PyString_FromString(buf);
 }
 
 static PyObject *
 float_str(PyFloatObject *v)
 {
-	char buf[100];
-	format_float(buf, sizeof(buf), v, PREC_STR);
-	return PyString_FromString(buf);
+    char buf[100];
+    format_float(buf, sizeof(buf), v, PREC_STR);
+    return PyString_FromString(buf);
 }
 
 /* Comparison is pretty much a nightmare.  When comparing float to float,
@@ -522,603 +522,603 @@
 static PyObject*
 float_richcompare(PyObject *v, PyObject *w, int op)
 {
-	double i, j;
-	int r = 0;
+    double i, j;
+    int r = 0;
 
-	assert(PyFloat_Check(v));
-	i = PyFloat_AS_DOUBLE(v);
+    assert(PyFloat_Check(v));
+    i = PyFloat_AS_DOUBLE(v);
 
-	/* Switch on the type of w.  Set i and j to doubles to be compared,
-	 * and op to the richcomp to use.
-	 */
-	if (PyFloat_Check(w))
-		j = PyFloat_AS_DOUBLE(w);
+    /* Switch on the type of w.  Set i and j to doubles to be compared,
+     * and op to the richcomp to use.
+     */
+    if (PyFloat_Check(w))
+        j = PyFloat_AS_DOUBLE(w);
 
-	else if (!Py_IS_FINITE(i)) {
-		if (PyInt_Check(w) || PyLong_Check(w))
-			/* If i is an infinity, its magnitude exceeds any
-			 * finite integer, so it doesn't matter which int we
-			 * compare i with.  If i is a NaN, similarly.
-			 */
-			j = 0.0;
-		else
-			goto Unimplemented;
-	}
+    else if (!Py_IS_FINITE(i)) {
+        if (PyInt_Check(w) || PyLong_Check(w))
+            /* If i is an infinity, its magnitude exceeds any
+             * finite integer, so it doesn't matter which int we
+             * compare i with.  If i is a NaN, similarly.
+             */
+            j = 0.0;
+        else
+            goto Unimplemented;
+    }
 
-	else if (PyInt_Check(w)) {
-		long jj = PyInt_AS_LONG(w);
-		/* In the worst realistic case I can imagine, C double is a
-		 * Cray single with 48 bits of precision, and long has 64
-		 * bits.
-		 */
+    else if (PyInt_Check(w)) {
+        long jj = PyInt_AS_LONG(w);
+        /* In the worst realistic case I can imagine, C double is a
+         * Cray single with 48 bits of precision, and long has 64
+         * bits.
+         */
 #if SIZEOF_LONG > 6
-		unsigned long abs = (unsigned long)(jj < 0 ? -jj : jj);
-		if (abs >> 48) {
-			/* Needs more than 48 bits.  Make it take the
-			 * PyLong path.
-			 */
-			PyObject *result;
-			PyObject *ww = PyLong_FromLong(jj);
+        unsigned long abs = (unsigned long)(jj < 0 ? -jj : jj);
+        if (abs >> 48) {
+            /* Needs more than 48 bits.  Make it take the
+             * PyLong path.
+             */
+            PyObject *result;
+            PyObject *ww = PyLong_FromLong(jj);
 
-			if (ww == NULL)
-				return NULL;
-			result = float_richcompare(v, ww, op);
-			Py_DECREF(ww);
-			return result;
-		}
+            if (ww == NULL)
+                return NULL;
+            result = float_richcompare(v, ww, op);
+            Py_DECREF(ww);
+            return result;
+        }
 #endif
-		j = (double)jj;
-		assert((long)j == jj);
-	}
+        j = (double)jj;
+        assert((long)j == jj);
+    }
 
-	else if (PyLong_Check(w)) {
-		int vsign = i == 0.0 ? 0 : i < 0.0 ? -1 : 1;
-		int wsign = _PyLong_Sign(w);
-		size_t nbits;
-		int exponent;
+    else if (PyLong_Check(w)) {
+        int vsign = i == 0.0 ? 0 : i < 0.0 ? -1 : 1;
+        int wsign = _PyLong_Sign(w);
+        size_t nbits;
+        int exponent;
 
-		if (vsign != wsign) {
-			/* Magnitudes are irrelevant -- the signs alone
-			 * determine the outcome.
-			 */
-			i = (double)vsign;
-			j = (double)wsign;
-			goto Compare;
-		}
-		/* The signs are the same. */
-		/* Convert w to a double if it fits.  In particular, 0 fits. */
-		nbits = _PyLong_NumBits(w);
-		if (nbits == (size_t)-1 && PyErr_Occurred()) {
-			/* This long is so large that size_t isn't big enough
-			 * to hold the # of bits.  Replace with little doubles
-			 * that give the same outcome -- w is so large that
-			 * its magnitude must exceed the magnitude of any
-			 * finite float.
-			 */
-			PyErr_Clear();
-			i = (double)vsign;
-			assert(wsign != 0);
-			j = wsign * 2.0;
-			goto Compare;
-		}
-		if (nbits <= 48) {
-			j = PyLong_AsDouble(w);
-			/* It's impossible that <= 48 bits overflowed. */
-			assert(j != -1.0 || ! PyErr_Occurred());
-			goto Compare;
-		}
-		assert(wsign != 0); /* else nbits was 0 */
-		assert(vsign != 0); /* if vsign were 0, then since wsign is
-		                     * not 0, we would have taken the
-		                     * vsign != wsign branch at the start */
-		/* We want to work with non-negative numbers. */
-		if (vsign < 0) {
-			/* "Multiply both sides" by -1; this also swaps the
-			 * comparator.
-			 */
-			i = -i;
-			op = _Py_SwappedOp[op];
-		}
-		assert(i > 0.0);
-		(void) frexp(i, &exponent);
-		/* exponent is the # of bits in v before the radix point;
-		 * we know that nbits (the # of bits in w) > 48 at this point
-		 */
-		if (exponent < 0 || (size_t)exponent < nbits) {
-			i = 1.0;
-			j = 2.0;
-			goto Compare;
-		}
-		if ((size_t)exponent > nbits) {
-			i = 2.0;
-			j = 1.0;
-			goto Compare;
-		}
-		/* v and w have the same number of bits before the radix
-		 * point.  Construct two longs that have the same comparison
-		 * outcome.
-		 */
-		{
-			double fracpart;
-			double intpart;
-			PyObject *result = NULL;
-			PyObject *one = NULL;
-			PyObject *vv = NULL;
-			PyObject *ww = w;
+        if (vsign != wsign) {
+            /* Magnitudes are irrelevant -- the signs alone
+             * determine the outcome.
+             */
+            i = (double)vsign;
+            j = (double)wsign;
+            goto Compare;
+        }
+        /* The signs are the same. */
+        /* Convert w to a double if it fits.  In particular, 0 fits. */
+        nbits = _PyLong_NumBits(w);
+        if (nbits == (size_t)-1 && PyErr_Occurred()) {
+            /* This long is so large that size_t isn't big enough
+             * to hold the # of bits.  Replace with little doubles
+             * that give the same outcome -- w is so large that
+             * its magnitude must exceed the magnitude of any
+             * finite float.
+             */
+            PyErr_Clear();
+            i = (double)vsign;
+            assert(wsign != 0);
+            j = wsign * 2.0;
+            goto Compare;
+        }
+        if (nbits <= 48) {
+            j = PyLong_AsDouble(w);
+            /* It's impossible that <= 48 bits overflowed. */
+            assert(j != -1.0 || ! PyErr_Occurred());
+            goto Compare;
+        }
+        assert(wsign != 0); /* else nbits was 0 */
+        assert(vsign != 0); /* if vsign were 0, then since wsign is
+                             * not 0, we would have taken the
+                             * vsign != wsign branch at the start */
+        /* We want to work with non-negative numbers. */
+        if (vsign < 0) {
+            /* "Multiply both sides" by -1; this also swaps the
+             * comparator.
+             */
+            i = -i;
+            op = _Py_SwappedOp[op];
+        }
+        assert(i > 0.0);
+        (void) frexp(i, &exponent);
+        /* exponent is the # of bits in v before the radix point;
+         * we know that nbits (the # of bits in w) > 48 at this point
+         */
+        if (exponent < 0 || (size_t)exponent < nbits) {
+            i = 1.0;
+            j = 2.0;
+            goto Compare;
+        }
+        if ((size_t)exponent > nbits) {
+            i = 2.0;
+            j = 1.0;
+            goto Compare;
+        }
+        /* v and w have the same number of bits before the radix
+         * point.  Construct two longs that have the same comparison
+         * outcome.
+         */
+        {
+            double fracpart;
+            double intpart;
+            PyObject *result = NULL;
+            PyObject *one = NULL;
+            PyObject *vv = NULL;
+            PyObject *ww = w;
 
-			if (wsign < 0) {
-				ww = PyNumber_Negative(w);
-				if (ww == NULL)
-					goto Error;
-			}
-			else
-				Py_INCREF(ww);
+            if (wsign < 0) {
+                ww = PyNumber_Negative(w);
+                if (ww == NULL)
+                    goto Error;
+            }
+            else
+                Py_INCREF(ww);
 
-			fracpart = modf(i, &intpart);
-			vv = PyLong_FromDouble(intpart);
-			if (vv == NULL)
-				goto Error;
+            fracpart = modf(i, &intpart);
+            vv = PyLong_FromDouble(intpart);
+            if (vv == NULL)
+                goto Error;
 
-			if (fracpart != 0.0) {
-				/* Shift left, and or a 1 bit into vv
-				 * to represent the lost fraction.
-				 */
-				PyObject *temp;
+            if (fracpart != 0.0) {
+                /* Shift left, and or a 1 bit into vv
+                 * to represent the lost fraction.
+                 */
+                PyObject *temp;
 
-				one = PyInt_FromLong(1);
-				if (one == NULL)
-					goto Error;
+                one = PyInt_FromLong(1);
+                if (one == NULL)
+                    goto Error;
 
-				temp = PyNumber_Lshift(ww, one);
-				if (temp == NULL)
-					goto Error;
-				Py_DECREF(ww);
-				ww = temp;
+                temp = PyNumber_Lshift(ww, one);
+                if (temp == NULL)
+                    goto Error;
+                Py_DECREF(ww);
+                ww = temp;
 
-				temp = PyNumber_Lshift(vv, one);
-				if (temp == NULL)
-					goto Error;
-				Py_DECREF(vv);
-				vv = temp;
+                temp = PyNumber_Lshift(vv, one);
+                if (temp == NULL)
+                    goto Error;
+                Py_DECREF(vv);
+                vv = temp;
 
-				temp = PyNumber_Or(vv, one);
-				if (temp == NULL)
-					goto Error;
-				Py_DECREF(vv);
-				vv = temp;
-			}
+                temp = PyNumber_Or(vv, one);
+                if (temp == NULL)
+                    goto Error;
+                Py_DECREF(vv);
+                vv = temp;
+            }
 
-			r = PyObject_RichCompareBool(vv, ww, op);
-			if (r < 0)
-				goto Error;
-			result = PyBool_FromLong(r);
- 		 Error:
- 		 	Py_XDECREF(vv);
- 		 	Py_XDECREF(ww);
- 		 	Py_XDECREF(one);
- 		 	return result;
-		}
-	} /* else if (PyLong_Check(w)) */
+            r = PyObject_RichCompareBool(vv, ww, op);
+            if (r < 0)
+                goto Error;
+            result = PyBool_FromLong(r);
+         Error:
+            Py_XDECREF(vv);
+            Py_XDECREF(ww);
+            Py_XDECREF(one);
+            return result;
+        }
+    } /* else if (PyLong_Check(w)) */
 
-	else	/* w isn't float, int, or long */
-		goto Unimplemented;
+    else        /* w isn't float, int, or long */
+        goto Unimplemented;
 
  Compare:
-	PyFPE_START_PROTECT("richcompare", return NULL)
-	switch (op) {
-	case Py_EQ:
-		r = i == j;
-		break;
-	case Py_NE:
-		r = i != j;
-		break;
-	case Py_LE:
-		r = i <= j;
-		break;
-	case Py_GE:
-		r = i >= j;
-		break;
-	case Py_LT:
-		r = i < j;
-		break;
-	case Py_GT:
-		r = i > j;
-		break;
-	}
-	PyFPE_END_PROTECT(r)
-	return PyBool_FromLong(r);
+    PyFPE_START_PROTECT("richcompare", return NULL)
+    switch (op) {
+    case Py_EQ:
+        r = i == j;
+        break;
+    case Py_NE:
+        r = i != j;
+        break;
+    case Py_LE:
+        r = i <= j;
+        break;
+    case Py_GE:
+        r = i >= j;
+        break;
+    case Py_LT:
+        r = i < j;
+        break;
+    case Py_GT:
+        r = i > j;
+        break;
+    }
+    PyFPE_END_PROTECT(r)
+    return PyBool_FromLong(r);
 
  Unimplemented:
-	Py_INCREF(Py_NotImplemented);
-	return Py_NotImplemented;
+    Py_INCREF(Py_NotImplemented);
+    return Py_NotImplemented;
 }
 
 static long
 float_hash(PyFloatObject *v)
 {
-	return _Py_HashDouble(v->ob_fval);
+    return _Py_HashDouble(v->ob_fval);
 }
 
 static PyObject *
 float_add(PyObject *v, PyObject *w)
 {
-	double a,b;
-	CONVERT_TO_DOUBLE(v, a);
-	CONVERT_TO_DOUBLE(w, b);
-	PyFPE_START_PROTECT("add", return 0)
-	a = a + b;
-	PyFPE_END_PROTECT(a)
-	return PyFloat_FromDouble(a);
+    double a,b;
+    CONVERT_TO_DOUBLE(v, a);
+    CONVERT_TO_DOUBLE(w, b);
+    PyFPE_START_PROTECT("add", return 0)
+    a = a + b;
+    PyFPE_END_PROTECT(a)
+    return PyFloat_FromDouble(a);
 }
 
 static PyObject *
 float_sub(PyObject *v, PyObject *w)
 {
-	double a,b;
-	CONVERT_TO_DOUBLE(v, a);
-	CONVERT_TO_DOUBLE(w, b);
-	PyFPE_START_PROTECT("subtract", return 0)
-	a = a - b;
-	PyFPE_END_PROTECT(a)
-	return PyFloat_FromDouble(a);
+    double a,b;
+    CONVERT_TO_DOUBLE(v, a);
+    CONVERT_TO_DOUBLE(w, b);
+    PyFPE_START_PROTECT("subtract", return 0)
+    a = a - b;
+    PyFPE_END_PROTECT(a)
+    return PyFloat_FromDouble(a);
 }
 
 static PyObject *
 float_mul(PyObject *v, PyObject *w)
 {
-	double a,b;
-	CONVERT_TO_DOUBLE(v, a);
-	CONVERT_TO_DOUBLE(w, b);
-	PyFPE_START_PROTECT("multiply", return 0)
-	a = a * b;
-	PyFPE_END_PROTECT(a)
-	return PyFloat_FromDouble(a);
+    double a,b;
+    CONVERT_TO_DOUBLE(v, a);
+    CONVERT_TO_DOUBLE(w, b);
+    PyFPE_START_PROTECT("multiply", return 0)
+    a = a * b;
+    PyFPE_END_PROTECT(a)
+    return PyFloat_FromDouble(a);
 }
 
 static PyObject *
 float_div(PyObject *v, PyObject *w)
 {
-	double a,b;
-	CONVERT_TO_DOUBLE(v, a);
-	CONVERT_TO_DOUBLE(w, b);
+    double a,b;
+    CONVERT_TO_DOUBLE(v, a);
+    CONVERT_TO_DOUBLE(w, b);
 #ifdef Py_NAN
-	if (b == 0.0) {
-		PyErr_SetString(PyExc_ZeroDivisionError,
-				"float division");
-		return NULL;
-	}
+    if (b == 0.0) {
+        PyErr_SetString(PyExc_ZeroDivisionError,
+                        "float division");
+        return NULL;
+    }
 #endif
-	PyFPE_START_PROTECT("divide", return 0)
-	a = a / b;
-	PyFPE_END_PROTECT(a)
-	return PyFloat_FromDouble(a);
+    PyFPE_START_PROTECT("divide", return 0)
+    a = a / b;
+    PyFPE_END_PROTECT(a)
+    return PyFloat_FromDouble(a);
 }
 
 static PyObject *
 float_classic_div(PyObject *v, PyObject *w)
 {
-	double a,b;
-	CONVERT_TO_DOUBLE(v, a);
-	CONVERT_TO_DOUBLE(w, b);
-	if (Py_DivisionWarningFlag >= 2 &&
-	    PyErr_Warn(PyExc_DeprecationWarning, "classic float division") < 0)
-		return NULL;
+    double a,b;
+    CONVERT_TO_DOUBLE(v, a);
+    CONVERT_TO_DOUBLE(w, b);
+    if (Py_DivisionWarningFlag >= 2 &&
+        PyErr_Warn(PyExc_DeprecationWarning, "classic float division") < 0)
+        return NULL;
 #ifdef Py_NAN
-	if (b == 0.0) {
-		PyErr_SetString(PyExc_ZeroDivisionError,
-				"float division");
-		return NULL;
-	}
+    if (b == 0.0) {
+        PyErr_SetString(PyExc_ZeroDivisionError,
+                        "float division");
+        return NULL;
+    }
 #endif
-	PyFPE_START_PROTECT("divide", return 0)
-	a = a / b;
-	PyFPE_END_PROTECT(a)
-	return PyFloat_FromDouble(a);
+    PyFPE_START_PROTECT("divide", return 0)
+    a = a / b;
+    PyFPE_END_PROTECT(a)
+    return PyFloat_FromDouble(a);
 }
 
 static PyObject *
 float_rem(PyObject *v, PyObject *w)
 {
-	double vx, wx;
-	double mod;
-	CONVERT_TO_DOUBLE(v, vx);
-	CONVERT_TO_DOUBLE(w, wx);
+    double vx, wx;
+    double mod;
+    CONVERT_TO_DOUBLE(v, vx);
+    CONVERT_TO_DOUBLE(w, wx);
 #ifdef Py_NAN
-	if (wx == 0.0) {
-		PyErr_SetString(PyExc_ZeroDivisionError,
-				"float modulo");
-		return NULL;
-	}
+    if (wx == 0.0) {
+        PyErr_SetString(PyExc_ZeroDivisionError,
+                        "float modulo");
+        return NULL;
+    }
 #endif
-	PyFPE_START_PROTECT("modulo", return 0)
-	mod = fmod(vx, wx);
-	/* note: checking mod*wx < 0 is incorrect -- underflows to
-	   0 if wx < sqrt(smallest nonzero double) */
-	if (mod && ((wx < 0) != (mod < 0))) {
-		mod += wx;
-	}
-	PyFPE_END_PROTECT(mod)
-	return PyFloat_FromDouble(mod);
+    PyFPE_START_PROTECT("modulo", return 0)
+    mod = fmod(vx, wx);
+    /* note: checking mod*wx < 0 is incorrect -- underflows to
+       0 if wx < sqrt(smallest nonzero double) */
+    if (mod && ((wx < 0) != (mod < 0))) {
+        mod += wx;
+    }
+    PyFPE_END_PROTECT(mod)
+    return PyFloat_FromDouble(mod);
 }
 
 static PyObject *
 float_divmod(PyObject *v, PyObject *w)
 {
-	double vx, wx;
-	double div, mod, floordiv;
- 	CONVERT_TO_DOUBLE(v, vx);
- 	CONVERT_TO_DOUBLE(w, wx);
-	if (wx == 0.0) {
-		PyErr_SetString(PyExc_ZeroDivisionError, "float divmod()");
-		return NULL;
-	}
-	PyFPE_START_PROTECT("divmod", return 0)
-	mod = fmod(vx, wx);
-	/* fmod is typically exact, so vx-mod is *mathematically* an
-	   exact multiple of wx.  But this is fp arithmetic, and fp
-	   vx - mod is an approximation; the result is that div may
-	   not be an exact integral value after the division, although
-	   it will always be very close to one.
-	*/
-	div = (vx - mod) / wx;
-	if (mod) {
-		/* ensure the remainder has the same sign as the denominator */
-		if ((wx < 0) != (mod < 0)) {
-			mod += wx;
-			div -= 1.0;
-		}
-	}
-	else {
-		/* the remainder is zero, and in the presence of signed zeroes
-		   fmod returns different results across platforms; ensure
-		   it has the same sign as the denominator; we'd like to do
-		   "mod = wx * 0.0", but that may get optimized away */
-		mod *= mod;  /* hide "mod = +0" from optimizer */
-		if (wx < 0.0)
-			mod = -mod;
-	}
-	/* snap quotient to nearest integral value */
-	if (div) {
-		floordiv = floor(div);
-		if (div - floordiv > 0.5)
-			floordiv += 1.0;
-	}
-	else {
-		/* div is zero - get the same sign as the true quotient */
-		div *= div;	/* hide "div = +0" from optimizers */
-		floordiv = div * vx / wx; /* zero w/ sign of vx/wx */
-	}
-	PyFPE_END_PROTECT(floordiv)
-	return Py_BuildValue("(dd)", floordiv, mod);
+    double vx, wx;
+    double div, mod, floordiv;
+    CONVERT_TO_DOUBLE(v, vx);
+    CONVERT_TO_DOUBLE(w, wx);
+    if (wx == 0.0) {
+        PyErr_SetString(PyExc_ZeroDivisionError, "float divmod()");
+        return NULL;
+    }
+    PyFPE_START_PROTECT("divmod", return 0)
+    mod = fmod(vx, wx);
+    /* fmod is typically exact, so vx-mod is *mathematically* an
+       exact multiple of wx.  But this is fp arithmetic, and fp
+       vx - mod is an approximation; the result is that div may
+       not be an exact integral value after the division, although
+       it will always be very close to one.
+    */
+    div = (vx - mod) / wx;
+    if (mod) {
+        /* ensure the remainder has the same sign as the denominator */
+        if ((wx < 0) != (mod < 0)) {
+            mod += wx;
+            div -= 1.0;
+        }
+    }
+    else {
+        /* the remainder is zero, and in the presence of signed zeroes
+           fmod returns different results across platforms; ensure
+           it has the same sign as the denominator; we'd like to do
+           "mod = wx * 0.0", but that may get optimized away */
+        mod *= mod;  /* hide "mod = +0" from optimizer */
+        if (wx < 0.0)
+            mod = -mod;
+    }
+    /* snap quotient to nearest integral value */
+    if (div) {
+        floordiv = floor(div);
+        if (div - floordiv > 0.5)
+            floordiv += 1.0;
+    }
+    else {
+        /* div is zero - get the same sign as the true quotient */
+        div *= div;             /* hide "div = +0" from optimizers */
+        floordiv = div * vx / wx; /* zero w/ sign of vx/wx */
+    }
+    PyFPE_END_PROTECT(floordiv)
+    return Py_BuildValue("(dd)", floordiv, mod);
 }
 
 static PyObject *
 float_floor_div(PyObject *v, PyObject *w)
 {
-	PyObject *t, *r;
+    PyObject *t, *r;
 
-	t = float_divmod(v, w);
-	if (t == NULL || t == Py_NotImplemented)
-		return t;
-	assert(PyTuple_CheckExact(t));
-	r = PyTuple_GET_ITEM(t, 0);
-	Py_INCREF(r);
-	Py_DECREF(t);
-	return r;
+    t = float_divmod(v, w);
+    if (t == NULL || t == Py_NotImplemented)
+        return t;
+    assert(PyTuple_CheckExact(t));
+    r = PyTuple_GET_ITEM(t, 0);
+    Py_INCREF(r);
+    Py_DECREF(t);
+    return r;
 }
 
 static PyObject *
 float_pow(PyObject *v, PyObject *w, PyObject *z)
 {
-	double iv, iw, ix;
+    double iv, iw, ix;
 
-	if ((PyObject *)z != Py_None) {
-		PyErr_SetString(PyExc_TypeError, "pow() 3rd argument not "
-			"allowed unless all arguments are integers");
-		return NULL;
-	}
+    if ((PyObject *)z != Py_None) {
+        PyErr_SetString(PyExc_TypeError, "pow() 3rd argument not "
+            "allowed unless all arguments are integers");
+        return NULL;
+    }
 
-	CONVERT_TO_DOUBLE(v, iv);
-	CONVERT_TO_DOUBLE(w, iw);
+    CONVERT_TO_DOUBLE(v, iv);
+    CONVERT_TO_DOUBLE(w, iw);
 
-	/* Sort out special cases here instead of relying on pow() */
-	if (iw == 0) { 		/* v**0 is 1, even 0**0 */
-		return PyFloat_FromDouble(1.0);
-	}
-	if (iv == 0.0) {  /* 0**w is error if w<0, else 1 */
-		if (iw < 0.0) {
-			PyErr_SetString(PyExc_ZeroDivisionError,
-					"0.0 cannot be raised to a negative power");
-			return NULL;
-		}
-		return PyFloat_FromDouble(0.0);
-	}
-	if (iv == 1.0) { /* 1**w is 1, even 1**inf and 1**nan */
-		return PyFloat_FromDouble(1.0);
-	}
-	if (iv < 0.0) {
-		/* Whether this is an error is a mess, and bumps into libm
-		 * bugs so we have to figure it out ourselves.
-		 */
-		if (iw != floor(iw)) {
-			PyErr_SetString(PyExc_ValueError, "negative number "
-				"cannot be raised to a fractional power");
-			return NULL;
-		}
-		/* iw is an exact integer, albeit perhaps a very large one.
-		 * -1 raised to an exact integer should never be exceptional.
-		 * Alas, some libms (chiefly glibc as of early 2003) return
-		 * NaN and set EDOM on pow(-1, large_int) if the int doesn't
-		 * happen to be representable in a *C* integer.  That's a
-		 * bug; we let that slide in math.pow() (which currently
-		 * reflects all platform accidents), but not for Python's **.
-		 */
-		 if (iv == -1.0 && Py_IS_FINITE(iw)) {
-		 	/* Return 1 if iw is even, -1 if iw is odd; there's
-		 	 * no guarantee that any C integral type is big
-		 	 * enough to hold iw, so we have to check this
-		 	 * indirectly.
-		 	 */
-		 	ix = floor(iw * 0.5) * 2.0;
-			return PyFloat_FromDouble(ix == iw ? 1.0 : -1.0);
-		}
-		/* Else iv != -1.0, and overflow or underflow are possible.
-		 * Unless we're to write pow() ourselves, we have to trust
-		 * the platform to do this correctly.
-		 */
-	}
-	errno = 0;
-	PyFPE_START_PROTECT("pow", return NULL)
-	ix = pow(iv, iw);
-	PyFPE_END_PROTECT(ix)
-	Py_ADJUST_ERANGE1(ix);
-	if (errno != 0) {
-		/* We don't expect any errno value other than ERANGE, but
-		 * the range of libm bugs appears unbounded.
-		 */
-		PyErr_SetFromErrno(errno == ERANGE ? PyExc_OverflowError :
-						     PyExc_ValueError);
-		return NULL;
-	}
-	return PyFloat_FromDouble(ix);
+    /* Sort out special cases here instead of relying on pow() */
+    if (iw == 0) {              /* v**0 is 1, even 0**0 */
+        return PyFloat_FromDouble(1.0);
+    }
+    if (iv == 0.0) {  /* 0**w is error if w<0, else 1 */
+        if (iw < 0.0) {
+            PyErr_SetString(PyExc_ZeroDivisionError,
+                            "0.0 cannot be raised to a negative power");
+            return NULL;
+        }
+        return PyFloat_FromDouble(0.0);
+    }
+    if (iv == 1.0) { /* 1**w is 1, even 1**inf and 1**nan */
+        return PyFloat_FromDouble(1.0);
+    }
+    if (iv < 0.0) {
+        /* Whether this is an error is a mess, and bumps into libm
+         * bugs so we have to figure it out ourselves.
+         */
+        if (iw != floor(iw)) {
+            PyErr_SetString(PyExc_ValueError, "negative number "
+                "cannot be raised to a fractional power");
+            return NULL;
+        }
+        /* iw is an exact integer, albeit perhaps a very large one.
+         * -1 raised to an exact integer should never be exceptional.
+         * Alas, some libms (chiefly glibc as of early 2003) return
+         * NaN and set EDOM on pow(-1, large_int) if the int doesn't
+         * happen to be representable in a *C* integer.  That's a
+         * bug; we let that slide in math.pow() (which currently
+         * reflects all platform accidents), but not for Python's **.
+         */
+         if (iv == -1.0 && Py_IS_FINITE(iw)) {
+            /* Return 1 if iw is even, -1 if iw is odd; there's
+             * no guarantee that any C integral type is big
+             * enough to hold iw, so we have to check this
+             * indirectly.
+             */
+            ix = floor(iw * 0.5) * 2.0;
+            return PyFloat_FromDouble(ix == iw ? 1.0 : -1.0);
+        }
+        /* Else iv != -1.0, and overflow or underflow are possible.
+         * Unless we're to write pow() ourselves, we have to trust
+         * the platform to do this correctly.
+         */
+    }
+    errno = 0;
+    PyFPE_START_PROTECT("pow", return NULL)
+    ix = pow(iv, iw);
+    PyFPE_END_PROTECT(ix)
+    Py_ADJUST_ERANGE1(ix);
+    if (errno != 0) {
+        /* We don't expect any errno value other than ERANGE, but
+         * the range of libm bugs appears unbounded.
+         */
+        PyErr_SetFromErrno(errno == ERANGE ? PyExc_OverflowError :
+                             PyExc_ValueError);
+        return NULL;
+    }
+    return PyFloat_FromDouble(ix);
 }
 
 static PyObject *
 float_neg(PyFloatObject *v)
 {
-	return PyFloat_FromDouble(-v->ob_fval);
+    return PyFloat_FromDouble(-v->ob_fval);
 }
 
 static PyObject *
 float_abs(PyFloatObject *v)
 {
-	return PyFloat_FromDouble(fabs(v->ob_fval));
+    return PyFloat_FromDouble(fabs(v->ob_fval));
 }
 
 static int
 float_nonzero(PyFloatObject *v)
 {
-	return v->ob_fval != 0.0;
+    return v->ob_fval != 0.0;
 }
 
 static int
 float_coerce(PyObject **pv, PyObject **pw)
 {
-	if (PyInt_Check(*pw)) {
-		long x = PyInt_AsLong(*pw);
-		*pw = PyFloat_FromDouble((double)x);
-		Py_INCREF(*pv);
-		return 0;
-	}
-	else if (PyLong_Check(*pw)) {
-		double x = PyLong_AsDouble(*pw);
-		if (x == -1.0 && PyErr_Occurred())
-			return -1;
-		*pw = PyFloat_FromDouble(x);
-		Py_INCREF(*pv);
-		return 0;
-	}
-	else if (PyFloat_Check(*pw)) {
-		Py_INCREF(*pv);
-		Py_INCREF(*pw);
-		return 0;
-	}
-	return 1; /* Can't do it */
+    if (PyInt_Check(*pw)) {
+        long x = PyInt_AsLong(*pw);
+        *pw = PyFloat_FromDouble((double)x);
+        Py_INCREF(*pv);
+        return 0;
+    }
+    else if (PyLong_Check(*pw)) {
+        double x = PyLong_AsDouble(*pw);
+        if (x == -1.0 && PyErr_Occurred())
+            return -1;
+        *pw = PyFloat_FromDouble(x);
+        Py_INCREF(*pv);
+        return 0;
+    }
+    else if (PyFloat_Check(*pw)) {
+        Py_INCREF(*pv);
+        Py_INCREF(*pw);
+        return 0;
+    }
+    return 1; /* Can't do it */
 }
 
 static PyObject *
 float_is_integer(PyObject *v)
 {
-	double x = PyFloat_AsDouble(v);
-	PyObject *o;
-	
-	if (x == -1.0 && PyErr_Occurred())
-		return NULL;
-	if (!Py_IS_FINITE(x))
-		Py_RETURN_FALSE;
-	errno = 0;
-	PyFPE_START_PROTECT("is_integer", return NULL)
-	o = (floor(x) == x) ? Py_True : Py_False;
-	PyFPE_END_PROTECT(x)
-	if (errno != 0) {
-		PyErr_SetFromErrno(errno == ERANGE ? PyExc_OverflowError :
-						     PyExc_ValueError);
-		return NULL;
-	}
-	Py_INCREF(o);
-	return o;
+    double x = PyFloat_AsDouble(v);
+    PyObject *o;
+
+    if (x == -1.0 && PyErr_Occurred())
+        return NULL;
+    if (!Py_IS_FINITE(x))
+        Py_RETURN_FALSE;
+    errno = 0;
+    PyFPE_START_PROTECT("is_integer", return NULL)
+    o = (floor(x) == x) ? Py_True : Py_False;
+    PyFPE_END_PROTECT(x)
+    if (errno != 0) {
+        PyErr_SetFromErrno(errno == ERANGE ? PyExc_OverflowError :
+                             PyExc_ValueError);
+        return NULL;
+    }
+    Py_INCREF(o);
+    return o;
 }
 
 #if 0
 static PyObject *
 float_is_inf(PyObject *v)
 {
-	double x = PyFloat_AsDouble(v);
-	if (x == -1.0 && PyErr_Occurred())
-		return NULL;
-	return PyBool_FromLong((long)Py_IS_INFINITY(x));
+    double x = PyFloat_AsDouble(v);
+    if (x == -1.0 && PyErr_Occurred())
+        return NULL;
+    return PyBool_FromLong((long)Py_IS_INFINITY(x));
 }
 
 static PyObject *
 float_is_nan(PyObject *v)
 {
-	double x = PyFloat_AsDouble(v);
-	if (x == -1.0 && PyErr_Occurred())
-		return NULL;
-	return PyBool_FromLong((long)Py_IS_NAN(x));
+    double x = PyFloat_AsDouble(v);
+    if (x == -1.0 && PyErr_Occurred())
+        return NULL;
+    return PyBool_FromLong((long)Py_IS_NAN(x));
 }
 
 static PyObject *
 float_is_finite(PyObject *v)
 {
-	double x = PyFloat_AsDouble(v);
-	if (x == -1.0 && PyErr_Occurred())
-		return NULL;
-	return PyBool_FromLong((long)Py_IS_FINITE(x));
+    double x = PyFloat_AsDouble(v);
+    if (x == -1.0 && PyErr_Occurred())
+        return NULL;
+    return PyBool_FromLong((long)Py_IS_FINITE(x));
 }
 #endif
 
 static PyObject *
 float_trunc(PyObject *v)
 {
-	double x = PyFloat_AsDouble(v);
-	double wholepart;	/* integral portion of x, rounded toward 0 */
+    double x = PyFloat_AsDouble(v);
+    double wholepart;           /* integral portion of x, rounded toward 0 */
 
-	(void)modf(x, &wholepart);
-	/* Try to get out cheap if this fits in a Python int.  The attempt
-	 * to cast to long must be protected, as C doesn't define what
-	 * happens if the double is too big to fit in a long.  Some rare
-	 * systems raise an exception then (RISCOS was mentioned as one,
-	 * and someone using a non-default option on Sun also bumped into
-	 * that).  Note that checking for >= and <= LONG_{MIN,MAX} would
-	 * still be vulnerable:  if a long has more bits of precision than
-	 * a double, casting MIN/MAX to double may yield an approximation,
-	 * and if that's rounded up, then, e.g., wholepart=LONG_MAX+1 would
-	 * yield true from the C expression wholepart<=LONG_MAX, despite
-	 * that wholepart is actually greater than LONG_MAX.
-	 */
-	if (LONG_MIN < wholepart && wholepart < LONG_MAX) {
-		const long aslong = (long)wholepart;
-		return PyInt_FromLong(aslong);
-	}
-	return PyLong_FromDouble(wholepart);
+    (void)modf(x, &wholepart);
+    /* Try to get out cheap if this fits in a Python int.  The attempt
+     * to cast to long must be protected, as C doesn't define what
+     * happens if the double is too big to fit in a long.  Some rare
+     * systems raise an exception then (RISCOS was mentioned as one,
+     * and someone using a non-default option on Sun also bumped into
+     * that).  Note that checking for >= and <= LONG_{MIN,MAX} would
+     * still be vulnerable:  if a long has more bits of precision than
+     * a double, casting MIN/MAX to double may yield an approximation,
+     * and if that's rounded up, then, e.g., wholepart=LONG_MAX+1 would
+     * yield true from the C expression wholepart<=LONG_MAX, despite
+     * that wholepart is actually greater than LONG_MAX.
+     */
+    if (LONG_MIN < wholepart && wholepart < LONG_MAX) {
+        const long aslong = (long)wholepart;
+        return PyInt_FromLong(aslong);
+    }
+    return PyLong_FromDouble(wholepart);
 }
 
 static PyObject *
 float_long(PyObject *v)
 {
-	double x = PyFloat_AsDouble(v);
-	return PyLong_FromDouble(x);
+    double x = PyFloat_AsDouble(v);
+    return PyLong_FromDouble(x);
 }
 
 static PyObject *
 float_float(PyObject *v)
 {
-	if (PyFloat_CheckExact(v))
-		Py_INCREF(v);
-	else
-		v = PyFloat_FromDouble(((PyFloatObject *)v)->ob_fval);
-	return v;
+    if (PyFloat_CheckExact(v))
+        Py_INCREF(v);
+    else
+        v = PyFloat_FromDouble(((PyFloatObject *)v)->ob_fval);
+    return v;
 }
 
 /* turn ASCII hex characters into integer values and vice versa */
@@ -1126,73 +1126,73 @@
 static char
 char_from_hex(int x)
 {
-	assert(0 <= x && x < 16);
-	return "0123456789abcdef"[x];
+    assert(0 <= x && x < 16);
+    return "0123456789abcdef"[x];
 }
 
 static int
 hex_from_char(char c) {
-	int x;
-	switch(c) {
-	case '0':
-		x = 0;
-		break;
-	case '1':
-		x = 1;
-		break;
-	case '2':
-		x = 2;
-		break;
-	case '3':
-		x = 3;
-		break;
-	case '4':
-		x = 4;
-		break;
-	case '5':
-		x = 5;
-		break;
-	case '6':
-		x = 6;
-		break;
-	case '7':
-		x = 7;
-		break;
-	case '8':
-		x = 8;
-		break;
-	case '9':
-		x = 9;
-		break;
-	case 'a':
-	case 'A':
-		x = 10;
-		break;
-	case 'b':
-	case 'B':
-		x = 11;
-		break;
-	case 'c':
-	case 'C':
-		x = 12;
-		break;
-	case 'd':
-	case 'D':
-		x = 13;
-		break;
-	case 'e':
-	case 'E':
-		x = 14;
-		break;
-	case 'f':
-	case 'F':
-		x = 15;
-		break;
-	default:
-		x = -1;
-		break;
-	}
-	return x;
+    int x;
+    switch(c) {
+    case '0':
+        x = 0;
+        break;
+    case '1':
+        x = 1;
+        break;
+    case '2':
+        x = 2;
+        break;
+    case '3':
+        x = 3;
+        break;
+    case '4':
+        x = 4;
+        break;
+    case '5':
+        x = 5;
+        break;
+    case '6':
+        x = 6;
+        break;
+    case '7':
+        x = 7;
+        break;
+    case '8':
+        x = 8;
+        break;
+    case '9':
+        x = 9;
+        break;
+    case 'a':
+    case 'A':
+        x = 10;
+        break;
+    case 'b':
+    case 'B':
+        x = 11;
+        break;
+    case 'c':
+    case 'C':
+        x = 12;
+        break;
+    case 'd':
+    case 'D':
+        x = 13;
+        break;
+    case 'e':
+    case 'E':
+        x = 14;
+        break;
+    case 'f':
+    case 'F':
+        x = 15;
+        break;
+    default:
+        x = -1;
+        break;
+    }
+    return x;
 }
 
 /* convert a float to a hexadecimal string */
@@ -1204,54 +1204,54 @@
 static PyObject *
 float_hex(PyObject *v)
 {
-	double x, m;
-	int e, shift, i, si, esign;
-	/* Space for 1+(TOHEX_NBITS-1)/4 digits, a decimal point, and the
-	   trailing NUL byte. */
-	char s[(TOHEX_NBITS-1)/4+3];
+    double x, m;
+    int e, shift, i, si, esign;
+    /* Space for 1+(TOHEX_NBITS-1)/4 digits, a decimal point, and the
+       trailing NUL byte. */
+    char s[(TOHEX_NBITS-1)/4+3];
 
-	CONVERT_TO_DOUBLE(v, x);
+    CONVERT_TO_DOUBLE(v, x);
 
-	if (Py_IS_NAN(x) || Py_IS_INFINITY(x))
-		return float_str((PyFloatObject *)v);
+    if (Py_IS_NAN(x) || Py_IS_INFINITY(x))
+        return float_str((PyFloatObject *)v);
 
-	if (x == 0.0) {
-		if(copysign(1.0, x) == -1.0)
-			return PyString_FromString("-0x0.0p+0");
-		else
-			return PyString_FromString("0x0.0p+0");
-	}
+    if (x == 0.0) {
+        if(copysign(1.0, x) == -1.0)
+            return PyString_FromString("-0x0.0p+0");
+        else
+            return PyString_FromString("0x0.0p+0");
+    }
 
-	m = frexp(fabs(x), &e);
-	shift = 1 - MAX(DBL_MIN_EXP - e, 0);
-	m = ldexp(m, shift);
-	e -= shift;
+    m = frexp(fabs(x), &e);
+    shift = 1 - MAX(DBL_MIN_EXP - e, 0);
+    m = ldexp(m, shift);
+    e -= shift;
 
-	si = 0;
-	s[si] = char_from_hex((int)m);
-	si++;
-	m -= (int)m;
-	s[si] = '.';
-	si++;
-	for (i=0; i < (TOHEX_NBITS-1)/4; i++) {
-		m *= 16.0;
-		s[si] = char_from_hex((int)m);
-		si++;
-		m -= (int)m;
-	}
-	s[si] = '\0';
+    si = 0;
+    s[si] = char_from_hex((int)m);
+    si++;
+    m -= (int)m;
+    s[si] = '.';
+    si++;
+    for (i=0; i < (TOHEX_NBITS-1)/4; i++) {
+        m *= 16.0;
+        s[si] = char_from_hex((int)m);
+        si++;
+        m -= (int)m;
+    }
+    s[si] = '\0';
 
-	if (e < 0) {
-		esign = (int)'-';
-		e = -e;
-	}
-	else
-		esign = (int)'+';
+    if (e < 0) {
+        esign = (int)'-';
+        e = -e;
+    }
+    else
+        esign = (int)'+';
 
-	if (x < 0.0)
-		return PyString_FromFormat("-0x%sp%c%d", s, esign, e);
-	else
-		return PyString_FromFormat("0x%sp%c%d", s, esign, e);
+    if (x < 0.0)
+        return PyString_FromFormat("-0x%sp%c%d", s, esign, e);
+    else
+        return PyString_FromFormat("0x%sp%c%d", s, esign, e);
 }
 
 PyDoc_STRVAR(float_hex_doc,
@@ -1270,11 +1270,11 @@
 static int
 case_insensitive_match(const char *s, const char *t)
 {
-	while(*t && tolower(*s) == *t) {
-		s++;
-		t++;
-	}
-	return *t ? 0 : 1;
+    while(*t && tolower(*s) == *t) {
+        s++;
+        t++;
+    }
+    return *t ? 0 : 1;
 }
 
 /* Convert a hexadecimal string to a float. */
@@ -1282,250 +1282,250 @@
 static PyObject *
 float_fromhex(PyObject *cls, PyObject *arg)
 {
-	PyObject *result_as_float, *result;
-	double x;
-	long exp, top_exp, lsb, key_digit;
-	char *s, *coeff_start, *s_store, *coeff_end, *exp_start, *s_end;
-	int half_eps, digit, round_up, sign=1;
-	Py_ssize_t length, ndigits, fdigits, i;
+    PyObject *result_as_float, *result;
+    double x;
+    long exp, top_exp, lsb, key_digit;
+    char *s, *coeff_start, *s_store, *coeff_end, *exp_start, *s_end;
+    int half_eps, digit, round_up, sign=1;
+    Py_ssize_t length, ndigits, fdigits, i;
 
-	/*
-	 * For the sake of simplicity and correctness, we impose an artificial
-	 * limit on ndigits, the total number of hex digits in the coefficient
-	 * The limit is chosen to ensure that, writing exp for the exponent,
-	 *
-	 *   (1) if exp > LONG_MAX/2 then the value of the hex string is
-	 *   guaranteed to overflow (provided it's nonzero)
-	 *
-	 *   (2) if exp < LONG_MIN/2 then the value of the hex string is
-	 *   guaranteed to underflow to 0.
-	 *
-	 *   (3) if LONG_MIN/2 <= exp <= LONG_MAX/2 then there's no danger of
-	 *   overflow in the calculation of exp and top_exp below.
-	 *
-	 * More specifically, ndigits is assumed to satisfy the following
-	 * inequalities:
-	 *
-	 *   4*ndigits <= DBL_MIN_EXP - DBL_MANT_DIG - LONG_MIN/2
-	 *   4*ndigits <= LONG_MAX/2 + 1 - DBL_MAX_EXP
-	 *
-	 * If either of these inequalities is not satisfied, a ValueError is
-	 * raised.  Otherwise, write x for the value of the hex string, and
-	 * assume x is nonzero.  Then
-	 *
-	 *   2**(exp-4*ndigits) <= |x| < 2**(exp+4*ndigits).
-	 *
-	 * Now if exp > LONG_MAX/2 then:
-	 *
-	 *   exp - 4*ndigits >= LONG_MAX/2 + 1 - (LONG_MAX/2 + 1 - DBL_MAX_EXP)
-	 *                    = DBL_MAX_EXP
-	 *
-	 * so |x| >= 2**DBL_MAX_EXP, which is too large to be stored in C
-	 * double, so overflows.  If exp < LONG_MIN/2, then
-	 *
-	 *   exp + 4*ndigits <= LONG_MIN/2 - 1 + (
-	 *                      DBL_MIN_EXP - DBL_MANT_DIG - LONG_MIN/2)
-	 *                    = DBL_MIN_EXP - DBL_MANT_DIG - 1
-	 *
-	 * and so |x| < 2**(DBL_MIN_EXP-DBL_MANT_DIG-1), hence underflows to 0
-	 * when converted to a C double.
-	 *
-	 * It's easy to show that if LONG_MIN/2 <= exp <= LONG_MAX/2 then both
-	 * exp+4*ndigits and exp-4*ndigits are within the range of a long.
-	 */
+    /*
+     * For the sake of simplicity and correctness, we impose an artificial
+     * limit on ndigits, the total number of hex digits in the coefficient
+     * The limit is chosen to ensure that, writing exp for the exponent,
+     *
+     *   (1) if exp > LONG_MAX/2 then the value of the hex string is
+     *   guaranteed to overflow (provided it's nonzero)
+     *
+     *   (2) if exp < LONG_MIN/2 then the value of the hex string is
+     *   guaranteed to underflow to 0.
+     *
+     *   (3) if LONG_MIN/2 <= exp <= LONG_MAX/2 then there's no danger of
+     *   overflow in the calculation of exp and top_exp below.
+     *
+     * More specifically, ndigits is assumed to satisfy the following
+     * inequalities:
+     *
+     *   4*ndigits <= DBL_MIN_EXP - DBL_MANT_DIG - LONG_MIN/2
+     *   4*ndigits <= LONG_MAX/2 + 1 - DBL_MAX_EXP
+     *
+     * If either of these inequalities is not satisfied, a ValueError is
+     * raised.  Otherwise, write x for the value of the hex string, and
+     * assume x is nonzero.  Then
+     *
+     *   2**(exp-4*ndigits) <= |x| < 2**(exp+4*ndigits).
+     *
+     * Now if exp > LONG_MAX/2 then:
+     *
+     *   exp - 4*ndigits >= LONG_MAX/2 + 1 - (LONG_MAX/2 + 1 - DBL_MAX_EXP)
+     *                    = DBL_MAX_EXP
+     *
+     * so |x| >= 2**DBL_MAX_EXP, which is too large to be stored in C
+     * double, so overflows.  If exp < LONG_MIN/2, then
+     *
+     *   exp + 4*ndigits <= LONG_MIN/2 - 1 + (
+     *                      DBL_MIN_EXP - DBL_MANT_DIG - LONG_MIN/2)
+     *                    = DBL_MIN_EXP - DBL_MANT_DIG - 1
+     *
+     * and so |x| < 2**(DBL_MIN_EXP-DBL_MANT_DIG-1), hence underflows to 0
+     * when converted to a C double.
+     *
+     * It's easy to show that if LONG_MIN/2 <= exp <= LONG_MAX/2 then both
+     * exp+4*ndigits and exp-4*ndigits are within the range of a long.
+     */
 
-	if (PyString_AsStringAndSize(arg, &s, &length))
-		return NULL;
-	s_end = s + length;
+    if (PyString_AsStringAndSize(arg, &s, &length))
+        return NULL;
+    s_end = s + length;
 
-	/********************
-	 * Parse the string *
-	 ********************/
+    /********************
+     * Parse the string *
+     ********************/
 
-	/* leading whitespace and optional sign */
-	while (*s && isspace(Py_CHARMASK(*s)))
-		s++;
-	if (*s == '-') {
-		s++;
-		sign = -1;
-	}
-	else if (*s == '+')
-		s++;
+    /* leading whitespace and optional sign */
+    while (*s && isspace(Py_CHARMASK(*s)))
+        s++;
+    if (*s == '-') {
+        s++;
+        sign = -1;
+    }
+    else if (*s == '+')
+        s++;
 
-	/* infinities and nans */
-	if (*s == 'i' || *s == 'I') {
-		if (!case_insensitive_match(s+1, "nf"))
-			goto parse_error;
-		s += 3;
-		x = Py_HUGE_VAL;
-		if (case_insensitive_match(s, "inity"))
-			s += 5;
-		goto finished;
-	}
-	if (*s == 'n' || *s == 'N') {
-		if (!case_insensitive_match(s+1, "an"))
-			goto parse_error;
-		s += 3;
-		x = Py_NAN;
-		goto finished;
-	}
+    /* infinities and nans */
+    if (*s == 'i' || *s == 'I') {
+        if (!case_insensitive_match(s+1, "nf"))
+            goto parse_error;
+        s += 3;
+        x = Py_HUGE_VAL;
+        if (case_insensitive_match(s, "inity"))
+            s += 5;
+        goto finished;
+    }
+    if (*s == 'n' || *s == 'N') {
+        if (!case_insensitive_match(s+1, "an"))
+            goto parse_error;
+        s += 3;
+        x = Py_NAN;
+        goto finished;
+    }
 
-	/* [0x] */
-	s_store = s;
-	if (*s == '0') {
-		s++;
-		if (tolower(*s) == (int)'x')
-			s++;
-		else
-			s = s_store;
-	}
+    /* [0x] */
+    s_store = s;
+    if (*s == '0') {
+        s++;
+        if (tolower(*s) == (int)'x')
+            s++;
+        else
+            s = s_store;
+    }
 
-	/* coefficient: <integer> [. <fraction>] */
-	coeff_start = s;
-	while (hex_from_char(*s) >= 0)
-		s++;
-	s_store = s;
-	if (*s == '.') {
-		s++;
-		while (hex_from_char(*s) >= 0)
-			s++;
-		coeff_end = s-1;
-	}
-	else
-		coeff_end = s;
+    /* coefficient: <integer> [. <fraction>] */
+    coeff_start = s;
+    while (hex_from_char(*s) >= 0)
+        s++;
+    s_store = s;
+    if (*s == '.') {
+        s++;
+        while (hex_from_char(*s) >= 0)
+            s++;
+        coeff_end = s-1;
+    }
+    else
+        coeff_end = s;
 
-	/* ndigits = total # of hex digits; fdigits = # after point */
-	ndigits = coeff_end - coeff_start;
-	fdigits = coeff_end - s_store;
-	if (ndigits == 0)
-		goto parse_error;
-	if (ndigits > MIN(DBL_MIN_EXP - DBL_MANT_DIG - LONG_MIN/2,
-			  LONG_MAX/2 + 1 - DBL_MAX_EXP)/4)
-		goto insane_length_error;
+    /* ndigits = total # of hex digits; fdigits = # after point */
+    ndigits = coeff_end - coeff_start;
+    fdigits = coeff_end - s_store;
+    if (ndigits == 0)
+        goto parse_error;
+    if (ndigits > MIN(DBL_MIN_EXP - DBL_MANT_DIG - LONG_MIN/2,
+                      LONG_MAX/2 + 1 - DBL_MAX_EXP)/4)
+        goto insane_length_error;
 
-	/* [p <exponent>] */
-	if (tolower(*s) == (int)'p') {
-		s++;
-		exp_start = s;
-		if (*s == '-' || *s == '+')
-			s++;
-		if (!('0' <= *s && *s <= '9'))
-			goto parse_error;
-		s++;
-		while ('0' <= *s && *s <= '9')
-			s++;
-		exp = strtol(exp_start, NULL, 10);
-	}
-	else
-		exp = 0;
+    /* [p <exponent>] */
+    if (tolower(*s) == (int)'p') {
+        s++;
+        exp_start = s;
+        if (*s == '-' || *s == '+')
+            s++;
+        if (!('0' <= *s && *s <= '9'))
+            goto parse_error;
+        s++;
+        while ('0' <= *s && *s <= '9')
+            s++;
+        exp = strtol(exp_start, NULL, 10);
+    }
+    else
+        exp = 0;
 
 /* for 0 <= j < ndigits, HEX_DIGIT(j) gives the jth most significant digit */
-#define HEX_DIGIT(j) hex_from_char(*((j) < fdigits ?		\
-				     coeff_end-(j) :			\
-				     coeff_end-1-(j)))
+#define HEX_DIGIT(j) hex_from_char(*((j) < fdigits ?            \
+                     coeff_end-(j) :                                    \
+                     coeff_end-1-(j)))
 
-	/*******************************************
-	 * Compute rounded value of the hex string *
-	 *******************************************/
+    /*******************************************
+     * Compute rounded value of the hex string *
+     *******************************************/
 
-	/* Discard leading zeros, and catch extreme overflow and underflow */
-	while (ndigits > 0 && HEX_DIGIT(ndigits-1) == 0)
-		ndigits--;
-	if (ndigits == 0 || exp < LONG_MIN/2) {
-		x = 0.0;
-		goto finished;
-	}
-	if (exp > LONG_MAX/2)
-		goto overflow_error;
+    /* Discard leading zeros, and catch extreme overflow and underflow */
+    while (ndigits > 0 && HEX_DIGIT(ndigits-1) == 0)
+        ndigits--;
+    if (ndigits == 0 || exp < LONG_MIN/2) {
+        x = 0.0;
+        goto finished;
+    }
+    if (exp > LONG_MAX/2)
+        goto overflow_error;
 
-	/* Adjust exponent for fractional part. */
-	exp = exp - 4*((long)fdigits);
+    /* Adjust exponent for fractional part. */
+    exp = exp - 4*((long)fdigits);
 
-	/* top_exp = 1 more than exponent of most sig. bit of coefficient */
-	top_exp = exp + 4*((long)ndigits - 1);
-	for (digit = HEX_DIGIT(ndigits-1); digit != 0; digit /= 2)
-		top_exp++;
+    /* top_exp = 1 more than exponent of most sig. bit of coefficient */
+    top_exp = exp + 4*((long)ndigits - 1);
+    for (digit = HEX_DIGIT(ndigits-1); digit != 0; digit /= 2)
+        top_exp++;
 
-	/* catch almost all nonextreme cases of overflow and underflow here */
-	if (top_exp < DBL_MIN_EXP - DBL_MANT_DIG) {
-		x = 0.0;
-		goto finished;
-	}
-	if (top_exp > DBL_MAX_EXP)
-		goto overflow_error;
+    /* catch almost all nonextreme cases of overflow and underflow here */
+    if (top_exp < DBL_MIN_EXP - DBL_MANT_DIG) {
+        x = 0.0;
+        goto finished;
+    }
+    if (top_exp > DBL_MAX_EXP)
+        goto overflow_error;
 
-	/* lsb = exponent of least significant bit of the *rounded* value.
-	   This is top_exp - DBL_MANT_DIG unless result is subnormal. */
-	lsb = MAX(top_exp, (long)DBL_MIN_EXP) - DBL_MANT_DIG;
+    /* lsb = exponent of least significant bit of the *rounded* value.
+       This is top_exp - DBL_MANT_DIG unless result is subnormal. */
+    lsb = MAX(top_exp, (long)DBL_MIN_EXP) - DBL_MANT_DIG;
 
-	x = 0.0;
-	if (exp >= lsb) {
-		/* no rounding required */
-		for (i = ndigits-1; i >= 0; i--)
-			x = 16.0*x + HEX_DIGIT(i);
-		x = ldexp(x, (int)(exp));
-		goto finished;
-	}
-	/* rounding required.  key_digit is the index of the hex digit
-	   containing the first bit to be rounded away. */
-	half_eps = 1 << (int)((lsb - exp - 1) % 4);
-	key_digit = (lsb - exp - 1) / 4;
-	for (i = ndigits-1; i > key_digit; i--)
-		x = 16.0*x + HEX_DIGIT(i);
-	digit = HEX_DIGIT(key_digit);
-	x = 16.0*x + (double)(digit & (16-2*half_eps));
+    x = 0.0;
+    if (exp >= lsb) {
+        /* no rounding required */
+        for (i = ndigits-1; i >= 0; i--)
+            x = 16.0*x + HEX_DIGIT(i);
+        x = ldexp(x, (int)(exp));
+        goto finished;
+    }
+    /* rounding required.  key_digit is the index of the hex digit
+       containing the first bit to be rounded away. */
+    half_eps = 1 << (int)((lsb - exp - 1) % 4);
+    key_digit = (lsb - exp - 1) / 4;
+    for (i = ndigits-1; i > key_digit; i--)
+        x = 16.0*x + HEX_DIGIT(i);
+    digit = HEX_DIGIT(key_digit);
+    x = 16.0*x + (double)(digit & (16-2*half_eps));
 
-	/* round-half-even: round up if bit lsb-1 is 1 and at least one of
-	   bits lsb, lsb-2, lsb-3, lsb-4, ... is 1. */
-	if ((digit & half_eps) != 0) {
-		round_up = 0;
-		if ((digit & (3*half_eps-1)) != 0 ||
-		    (half_eps == 8 && (HEX_DIGIT(key_digit+1) & 1) != 0))
-			round_up = 1;
-		else
-			for (i = key_digit-1; i >= 0; i--)
-				if (HEX_DIGIT(i) != 0) {
-					round_up = 1;
-					break;
-				}
-		if (round_up == 1) {
-			x += 2*half_eps;
-			if (top_exp == DBL_MAX_EXP &&
-			    x == ldexp((double)(2*half_eps), DBL_MANT_DIG))
-				/* overflow corner case: pre-rounded value <
-				   2**DBL_MAX_EXP; rounded=2**DBL_MAX_EXP. */
-				goto overflow_error;
-		}
-	}
-	x = ldexp(x, (int)(exp+4*key_digit));
+    /* round-half-even: round up if bit lsb-1 is 1 and at least one of
+       bits lsb, lsb-2, lsb-3, lsb-4, ... is 1. */
+    if ((digit & half_eps) != 0) {
+        round_up = 0;
+        if ((digit & (3*half_eps-1)) != 0 ||
+            (half_eps == 8 && (HEX_DIGIT(key_digit+1) & 1) != 0))
+            round_up = 1;
+        else
+            for (i = key_digit-1; i >= 0; i--)
+                if (HEX_DIGIT(i) != 0) {
+                    round_up = 1;
+                    break;
+                }
+        if (round_up == 1) {
+            x += 2*half_eps;
+            if (top_exp == DBL_MAX_EXP &&
+                x == ldexp((double)(2*half_eps), DBL_MANT_DIG))
+                /* overflow corner case: pre-rounded value <
+                   2**DBL_MAX_EXP; rounded=2**DBL_MAX_EXP. */
+                goto overflow_error;
+        }
+    }
+    x = ldexp(x, (int)(exp+4*key_digit));
 
   finished:
-	/* optional trailing whitespace leading to the end of the string */
-	while (*s && isspace(Py_CHARMASK(*s)))
-		s++;
-	if (s != s_end)
-		goto parse_error;
-	result_as_float = Py_BuildValue("(d)", sign * x);
-	if (result_as_float == NULL)
-		return NULL;
-	result = PyObject_CallObject(cls, result_as_float);
-	Py_DECREF(result_as_float);
-	return result;
+    /* optional trailing whitespace leading to the end of the string */
+    while (*s && isspace(Py_CHARMASK(*s)))
+        s++;
+    if (s != s_end)
+        goto parse_error;
+    result_as_float = Py_BuildValue("(d)", sign * x);
+    if (result_as_float == NULL)
+        return NULL;
+    result = PyObject_CallObject(cls, result_as_float);
+    Py_DECREF(result_as_float);
+    return result;
 
   overflow_error:
-	PyErr_SetString(PyExc_OverflowError,
-			"hexadecimal value too large to represent as a float");
-	return NULL;
+    PyErr_SetString(PyExc_OverflowError,
+                    "hexadecimal value too large to represent as a float");
+    return NULL;
 
   parse_error:
-	PyErr_SetString(PyExc_ValueError,
-			"invalid hexadecimal floating-point string");
-	return NULL;
+    PyErr_SetString(PyExc_ValueError,
+                    "invalid hexadecimal floating-point string");
+    return NULL;
 
   insane_length_error:
-	PyErr_SetString(PyExc_ValueError,
-			"hexadecimal string too long to convert");
-	return NULL;
+    PyErr_SetString(PyExc_ValueError,
+                    "hexadecimal string too long to convert");
+    return NULL;
 }
 
 PyDoc_STRVAR(float_fromhex_doc,
@@ -1541,85 +1541,85 @@
 static PyObject *
 float_as_integer_ratio(PyObject *v, PyObject *unused)
 {
-	double self;
-	double float_part;
-	int exponent;
-	int i;
+    double self;
+    double float_part;
+    int exponent;
+    int i;
 
-	PyObject *prev;
-	PyObject *py_exponent = NULL;
-	PyObject *numerator = NULL;
-	PyObject *denominator = NULL;
-	PyObject *result_pair = NULL;
-	PyNumberMethods *long_methods = PyLong_Type.tp_as_number;
+    PyObject *prev;
+    PyObject *py_exponent = NULL;
+    PyObject *numerator = NULL;
+    PyObject *denominator = NULL;
+    PyObject *result_pair = NULL;
+    PyNumberMethods *long_methods = PyLong_Type.tp_as_number;
 
 #define INPLACE_UPDATE(obj, call) \
-	prev = obj; \
-	obj = call; \
-	Py_DECREF(prev); \
+    prev = obj; \
+    obj = call; \
+    Py_DECREF(prev); \
 
-	CONVERT_TO_DOUBLE(v, self);
+    CONVERT_TO_DOUBLE(v, self);
 
-	if (Py_IS_INFINITY(self)) {
-	  PyErr_SetString(PyExc_OverflowError,
-			  "Cannot pass infinity to float.as_integer_ratio.");
-	  return NULL;
-	}
+    if (Py_IS_INFINITY(self)) {
+      PyErr_SetString(PyExc_OverflowError,
+                      "Cannot pass infinity to float.as_integer_ratio.");
+      return NULL;
+    }
 #ifdef Py_NAN
-	if (Py_IS_NAN(self)) {
-	  PyErr_SetString(PyExc_ValueError,
-			  "Cannot pass NaN to float.as_integer_ratio.");
-	  return NULL;
-	}
+    if (Py_IS_NAN(self)) {
+      PyErr_SetString(PyExc_ValueError,
+                      "Cannot pass NaN to float.as_integer_ratio.");
+      return NULL;
+    }
 #endif
 
-	PyFPE_START_PROTECT("as_integer_ratio", goto error);
-	float_part = frexp(self, &exponent);  	/* self == float_part * 2**exponent exactly */
-	PyFPE_END_PROTECT(float_part);
-	
-	for (i=0; i<300 && float_part != floor(float_part) ; i++) {
-		float_part *= 2.0;
-		exponent--;
-	}	
-	/* self == float_part * 2**exponent exactly and float_part is integral.
-           If FLT_RADIX != 2, the 300 steps may leave a tiny fractional part
-           to be truncated by PyLong_FromDouble(). */
+    PyFPE_START_PROTECT("as_integer_ratio", goto error);
+    float_part = frexp(self, &exponent);        /* self == float_part * 2**exponent exactly */
+    PyFPE_END_PROTECT(float_part);
 
-	numerator = PyLong_FromDouble(float_part);
-	if (numerator == NULL) goto error;
+    for (i=0; i<300 && float_part != floor(float_part) ; i++) {
+        float_part *= 2.0;
+        exponent--;
+    }
+    /* self == float_part * 2**exponent exactly and float_part is integral.
+       If FLT_RADIX != 2, the 300 steps may leave a tiny fractional part
+       to be truncated by PyLong_FromDouble(). */
 
-	/* fold in 2**exponent */
-	denominator = PyLong_FromLong(1);
-	py_exponent = PyLong_FromLong(labs((long)exponent));
-	if (py_exponent == NULL) goto error;
-	INPLACE_UPDATE(py_exponent,
-		       long_methods->nb_lshift(denominator, py_exponent));
-	if (py_exponent == NULL) goto error;
-	if (exponent > 0) {
-		INPLACE_UPDATE(numerator,
-			       long_methods->nb_multiply(numerator, py_exponent));
-		if (numerator == NULL) goto error;
-	}
-	else {
-		Py_DECREF(denominator);
-		denominator = py_exponent;
-		py_exponent = NULL;
-	}
+    numerator = PyLong_FromDouble(float_part);
+    if (numerator == NULL) goto error;
 
-	/* Returns ints instead of longs where possible */
-	INPLACE_UPDATE(numerator, PyNumber_Int(numerator));
-	if (numerator == NULL) goto error;
-	INPLACE_UPDATE(denominator, PyNumber_Int(denominator));
-	if (denominator == NULL) goto error;
+    /* fold in 2**exponent */
+    denominator = PyLong_FromLong(1);
+    py_exponent = PyLong_FromLong(labs((long)exponent));
+    if (py_exponent == NULL) goto error;
+    INPLACE_UPDATE(py_exponent,
+                   long_methods->nb_lshift(denominator, py_exponent));
+    if (py_exponent == NULL) goto error;
+    if (exponent > 0) {
+        INPLACE_UPDATE(numerator,
+                       long_methods->nb_multiply(numerator, py_exponent));
+        if (numerator == NULL) goto error;
+    }
+    else {
+        Py_DECREF(denominator);
+        denominator = py_exponent;
+        py_exponent = NULL;
+    }
 
-	result_pair = PyTuple_Pack(2, numerator, denominator);
+    /* Returns ints instead of longs where possible */
+    INPLACE_UPDATE(numerator, PyNumber_Int(numerator));
+    if (numerator == NULL) goto error;
+    INPLACE_UPDATE(denominator, PyNumber_Int(denominator));
+    if (denominator == NULL) goto error;
+
+    result_pair = PyTuple_Pack(2, numerator, denominator);
 
 #undef INPLACE_UPDATE
 error:
-	Py_XDECREF(py_exponent);
-	Py_XDECREF(denominator);
-	Py_XDECREF(numerator);
-	return result_pair;
+    Py_XDECREF(py_exponent);
+    Py_XDECREF(denominator);
+    Py_XDECREF(numerator);
+    return result_pair;
 }
 
 PyDoc_STRVAR(float_as_integer_ratio_doc,
@@ -1643,18 +1643,18 @@
 static PyObject *
 float_new(PyTypeObject *type, PyObject *args, PyObject *kwds)
 {
-	PyObject *x = Py_False; /* Integer zero */
-	static char *kwlist[] = {"x", 0};
+    PyObject *x = Py_False; /* Integer zero */
+    static char *kwlist[] = {"x", 0};
 
-	if (type != &PyFloat_Type)
-		return float_subtype_new(type, args, kwds); /* Wimp out */
-	if (!PyArg_ParseTupleAndKeywords(args, kwds, "|O:float", kwlist, &x))
-		return NULL;
-	/* If it's a string, but not a string subclass, use
-	   PyFloat_FromString. */
-	if (PyString_CheckExact(x))
-		return PyFloat_FromString(x, NULL);
-	return PyNumber_Float(x);
+    if (type != &PyFloat_Type)
+        return float_subtype_new(type, args, kwds); /* Wimp out */
+    if (!PyArg_ParseTupleAndKeywords(args, kwds, "|O:float", kwlist, &x))
+        return NULL;
+    /* If it's a string, but not a string subclass, use
+       PyFloat_FromString. */
+    if (PyString_CheckExact(x))
+        return PyFloat_FromString(x, NULL);
+    return PyNumber_Float(x);
 }
 
 /* Wimpy, slow approach to tp_new calls for subtypes of float:
@@ -1665,33 +1665,33 @@
 static PyObject *
 float_subtype_new(PyTypeObject *type, PyObject *args, PyObject *kwds)
 {
-	PyObject *tmp, *newobj;
+    PyObject *tmp, *newobj;
 
-	assert(PyType_IsSubtype(type, &PyFloat_Type));
-	tmp = float_new(&PyFloat_Type, args, kwds);
-	if (tmp == NULL)
-		return NULL;
-	assert(PyFloat_CheckExact(tmp));
-	newobj = type->tp_alloc(type, 0);
-	if (newobj == NULL) {
-		Py_DECREF(tmp);
-		return NULL;
-	}
-	((PyFloatObject *)newobj)->ob_fval = ((PyFloatObject *)tmp)->ob_fval;
-	Py_DECREF(tmp);
-	return newobj;
+    assert(PyType_IsSubtype(type, &PyFloat_Type));
+    tmp = float_new(&PyFloat_Type, args, kwds);
+    if (tmp == NULL)
+        return NULL;
+    assert(PyFloat_CheckExact(tmp));
+    newobj = type->tp_alloc(type, 0);
+    if (newobj == NULL) {
+        Py_DECREF(tmp);
+        return NULL;
+    }
+    ((PyFloatObject *)newobj)->ob_fval = ((PyFloatObject *)tmp)->ob_fval;
+    Py_DECREF(tmp);
+    return newobj;
 }
 
 static PyObject *
 float_getnewargs(PyFloatObject *v)
 {
-	return Py_BuildValue("(d)", v->ob_fval);
+    return Py_BuildValue("(d)", v->ob_fval);
 }
 
 /* this is for the benefit of the pack/unpack routines below */
 
 typedef enum {
-	unknown_format, ieee_big_endian_format, ieee_little_endian_format
+    unknown_format, ieee_big_endian_format, ieee_little_endian_format
 } float_format_type;
 
 static float_format_type double_format, float_format;
@@ -1700,40 +1700,40 @@
 static PyObject *
 float_getformat(PyTypeObject *v, PyObject* arg)
 {
-	char* s;
-	float_format_type r;
+    char* s;
+    float_format_type r;
 
-	if (!PyString_Check(arg)) {
-		PyErr_Format(PyExc_TypeError,
-	     "__getformat__() argument must be string, not %.500s",
-			     Py_TYPE(arg)->tp_name);
-		return NULL;
-	}
-	s = PyString_AS_STRING(arg);
-	if (strcmp(s, "double") == 0) {
-		r = double_format;
-	}
-	else if (strcmp(s, "float") == 0) {
-		r = float_format;
-	}
-	else {
-		PyErr_SetString(PyExc_ValueError,
-				"__getformat__() argument 1 must be "
-				"'double' or 'float'");
-		return NULL;
-	}
-	
-	switch (r) {
-	case unknown_format:
-		return PyString_FromString("unknown");
-	case ieee_little_endian_format:
-		return PyString_FromString("IEEE, little-endian");
-	case ieee_big_endian_format:
-		return PyString_FromString("IEEE, big-endian");
-	default:
-		Py_FatalError("insane float_format or double_format");
-		return NULL;
-	}
+    if (!PyString_Check(arg)) {
+        PyErr_Format(PyExc_TypeError,
+         "__getformat__() argument must be string, not %.500s",
+                         Py_TYPE(arg)->tp_name);
+        return NULL;
+    }
+    s = PyString_AS_STRING(arg);
+    if (strcmp(s, "double") == 0) {
+        r = double_format;
+    }
+    else if (strcmp(s, "float") == 0) {
+        r = float_format;
+    }
+    else {
+        PyErr_SetString(PyExc_ValueError,
+                        "__getformat__() argument 1 must be "
+                        "'double' or 'float'");
+        return NULL;
+    }
+
+    switch (r) {
+    case unknown_format:
+        return PyString_FromString("unknown");
+    case ieee_little_endian_format:
+        return PyString_FromString("IEEE, little-endian");
+    case ieee_big_endian_format:
+        return PyString_FromString("IEEE, big-endian");
+    default:
+        Py_FatalError("insane float_format or double_format");
+        return NULL;
+    }
 }
 
 PyDoc_STRVAR(float_getformat_doc,
@@ -1749,57 +1749,57 @@
 static PyObject *
 float_setformat(PyTypeObject *v, PyObject* args)
 {
-	char* typestr;
-	char* format;
-	float_format_type f;
-	float_format_type detected;
-	float_format_type *p;
+    char* typestr;
+    char* format;
+    float_format_type f;
+    float_format_type detected;
+    float_format_type *p;
 
-	if (!PyArg_ParseTuple(args, "ss:__setformat__", &typestr, &format))
-		return NULL;
+    if (!PyArg_ParseTuple(args, "ss:__setformat__", &typestr, &format))
+        return NULL;
 
-	if (strcmp(typestr, "double") == 0) {
-		p = &double_format;
-		detected = detected_double_format;
-	}
-	else if (strcmp(typestr, "float") == 0) {
-		p = &float_format;
-		detected = detected_float_format;
-	}
-	else {
-		PyErr_SetString(PyExc_ValueError,
-				"__setformat__() argument 1 must "
-				"be 'double' or 'float'");
-		return NULL;
-	}
-	
-	if (strcmp(format, "unknown") == 0) {
-		f = unknown_format;
-	}
-	else if (strcmp(format, "IEEE, little-endian") == 0) {
-		f = ieee_little_endian_format;
-	}
-	else if (strcmp(format, "IEEE, big-endian") == 0) {
-		f = ieee_big_endian_format;
-	}
-	else {
-		PyErr_SetString(PyExc_ValueError,
-				"__setformat__() argument 2 must be "
-				"'unknown', 'IEEE, little-endian' or "
-				"'IEEE, big-endian'");
-		return NULL;
+    if (strcmp(typestr, "double") == 0) {
+        p = &double_format;
+        detected = detected_double_format;
+    }
+    else if (strcmp(typestr, "float") == 0) {
+        p = &float_format;
+        detected = detected_float_format;
+    }
+    else {
+        PyErr_SetString(PyExc_ValueError,
+                        "__setformat__() argument 1 must "
+                        "be 'double' or 'float'");
+        return NULL;
+    }
 
-	}
+    if (strcmp(format, "unknown") == 0) {
+        f = unknown_format;
+    }
+    else if (strcmp(format, "IEEE, little-endian") == 0) {
+        f = ieee_little_endian_format;
+    }
+    else if (strcmp(format, "IEEE, big-endian") == 0) {
+        f = ieee_big_endian_format;
+    }
+    else {
+        PyErr_SetString(PyExc_ValueError,
+                        "__setformat__() argument 2 must be "
+                        "'unknown', 'IEEE, little-endian' or "
+                        "'IEEE, big-endian'");
+        return NULL;
 
-	if (f != unknown_format && f != detected) {
-		PyErr_Format(PyExc_ValueError,
-			     "can only set %s format to 'unknown' or the "
-			     "detected platform value", typestr);
-		return NULL;
-	}
+    }
 
-	*p = f;
-	Py_RETURN_NONE;
+    if (f != unknown_format && f != detected) {
+        PyErr_Format(PyExc_ValueError,
+                     "can only set %s format to 'unknown' or the "
+                     "detected platform value", typestr);
+        return NULL;
+    }
+
+    *p = f;
+    Py_RETURN_NONE;
 }
 
 PyDoc_STRVAR(float_setformat_doc,
@@ -1818,37 +1818,37 @@
 static PyObject *
 float_getzero(PyObject *v, void *closure)
 {
-	return PyFloat_FromDouble(0.0);
+    return PyFloat_FromDouble(0.0);
 }
 
 static PyObject *
 float__format__(PyObject *self, PyObject *args)
 {
-	PyObject *format_spec;
+    PyObject *format_spec;
 
-	if (!PyArg_ParseTuple(args, "O:__format__", &format_spec))
-		return NULL;
-	if (PyBytes_Check(format_spec))
-		return _PyFloat_FormatAdvanced(self,
-					       PyBytes_AS_STRING(format_spec),
-					       PyBytes_GET_SIZE(format_spec));
-	if (PyUnicode_Check(format_spec)) {
-		/* Convert format_spec to a str */
-		PyObject *result;
-		PyObject *str_spec = PyObject_Str(format_spec);
+    if (!PyArg_ParseTuple(args, "O:__format__", &format_spec))
+        return NULL;
+    if (PyBytes_Check(format_spec))
+        return _PyFloat_FormatAdvanced(self,
+                                       PyBytes_AS_STRING(format_spec),
+                                       PyBytes_GET_SIZE(format_spec));
+    if (PyUnicode_Check(format_spec)) {
+        /* Convert format_spec to a str */
+        PyObject *result;
+        PyObject *str_spec = PyObject_Str(format_spec);
 
-		if (str_spec == NULL)
-			return NULL;
+        if (str_spec == NULL)
+            return NULL;
 
-		result = _PyFloat_FormatAdvanced(self,
-						 PyBytes_AS_STRING(str_spec),
-						 PyBytes_GET_SIZE(str_spec));
+        result = _PyFloat_FormatAdvanced(self,
+                                         PyBytes_AS_STRING(str_spec),
+                                         PyBytes_GET_SIZE(str_spec));
 
-		Py_DECREF(str_spec);
-		return result;
-	}
-	PyErr_SetString(PyExc_TypeError, "__format__ requires str or unicode");
-	return NULL;
+        Py_DECREF(str_spec);
+        return result;
+    }
+    PyErr_SetString(PyExc_TypeError, "__format__ requires str or unicode");
+    return NULL;
 }
 
 PyDoc_STRVAR(float__format__doc,
@@ -1858,42 +1858,42 @@
 
 
 static PyMethodDef float_methods[] = {
-	{"conjugate",	(PyCFunction)float_float,	METH_NOARGS,
-	 "Returns self, the complex conjugate of any float."},
-	{"__trunc__",	(PyCFunction)float_trunc, METH_NOARGS,
-         "Returns the Integral closest to x between 0 and x."},
-	{"as_integer_ratio", (PyCFunction)float_as_integer_ratio, METH_NOARGS,
-	 float_as_integer_ratio_doc},
-	{"fromhex", (PyCFunction)float_fromhex,
-	 METH_O|METH_CLASS, float_fromhex_doc},
-	{"hex", (PyCFunction)float_hex,
-	 METH_NOARGS, float_hex_doc},
-	{"is_integer",	(PyCFunction)float_is_integer,	METH_NOARGS,
-	 "Returns True if the float is an integer."},
+    {"conjugate",       (PyCFunction)float_float,       METH_NOARGS,
+     "Returns self, the complex conjugate of any float."},
+    {"__trunc__",       (PyCFunction)float_trunc, METH_NOARGS,
+     "Returns the Integral closest to x between 0 and x."},
+    {"as_integer_ratio", (PyCFunction)float_as_integer_ratio, METH_NOARGS,
+     float_as_integer_ratio_doc},
+    {"fromhex", (PyCFunction)float_fromhex,
+     METH_O|METH_CLASS, float_fromhex_doc},
+    {"hex", (PyCFunction)float_hex,
+     METH_NOARGS, float_hex_doc},
+    {"is_integer",      (PyCFunction)float_is_integer,  METH_NOARGS,
+     "Returns True if the float is an integer."},
 #if 0
-	{"is_inf",	(PyCFunction)float_is_inf,	METH_NOARGS,
-	 "Returns True if the float is positive or negative infinite."},
-	{"is_finite",	(PyCFunction)float_is_finite,	METH_NOARGS,
-	 "Returns True if the float is finite, neither infinite nor NaN."},
-	{"is_nan",	(PyCFunction)float_is_nan,	METH_NOARGS,
-	 "Returns True if the float is not a number (NaN)."},
+    {"is_inf",          (PyCFunction)float_is_inf,      METH_NOARGS,
+     "Returns True if the float is positive or negative infinite."},
+    {"is_finite",       (PyCFunction)float_is_finite,   METH_NOARGS,
+     "Returns True if the float is finite, neither infinite nor NaN."},
+    {"is_nan",          (PyCFunction)float_is_nan,      METH_NOARGS,
+     "Returns True if the float is not a number (NaN)."},
 #endif
-	{"__getnewargs__",	(PyCFunction)float_getnewargs,	METH_NOARGS},
-	{"__getformat__",	(PyCFunction)float_getformat,	
-	 METH_O|METH_CLASS,		float_getformat_doc},
-	{"__setformat__",	(PyCFunction)float_setformat,	
-	 METH_VARARGS|METH_CLASS,	float_setformat_doc},
-        {"__format__",          (PyCFunction)float__format__,
-         METH_VARARGS,                  float__format__doc},
-	{NULL,		NULL}		/* sentinel */
+    {"__getnewargs__",          (PyCFunction)float_getnewargs,  METH_NOARGS},
+    {"__getformat__",           (PyCFunction)float_getformat,
+     METH_O|METH_CLASS,                 float_getformat_doc},
+    {"__setformat__",           (PyCFunction)float_setformat,
+     METH_VARARGS|METH_CLASS,           float_setformat_doc},
+    {"__format__",          (PyCFunction)float__format__,
+     METH_VARARGS,                  float__format__doc},
+    {NULL,              NULL}           /* sentinel */
 };
 
 static PyGetSetDef float_getset[] = {
-    {"real", 
+    {"real",
      (getter)float_float, (setter)NULL,
      "the real part of a complex number",
      NULL},
-    {"imag", 
+    {"imag",
      (getter)float_getzero, (setter)NULL,
      "the imaginary part of a complex number",
      NULL},
@@ -1907,229 +1907,229 @@
 
 
 static PyNumberMethods float_as_number = {
-	float_add, 	/*nb_add*/
-	float_sub, 	/*nb_subtract*/
-	float_mul, 	/*nb_multiply*/
-	float_classic_div, /*nb_divide*/
-	float_rem, 	/*nb_remainder*/
-	float_divmod, 	/*nb_divmod*/
-	float_pow, 	/*nb_power*/
-	(unaryfunc)float_neg, /*nb_negative*/
-	(unaryfunc)float_float, /*nb_positive*/
-	(unaryfunc)float_abs, /*nb_absolute*/
-	(inquiry)float_nonzero, /*nb_nonzero*/
-	0,		/*nb_invert*/
-	0,		/*nb_lshift*/
-	0,		/*nb_rshift*/
-	0,		/*nb_and*/
-	0,		/*nb_xor*/
-	0,		/*nb_or*/
-	float_coerce, 	/*nb_coerce*/
-	float_trunc, 	/*nb_int*/
-	float_long, 	/*nb_long*/
-	float_float,	/*nb_float*/
-	0,		/* nb_oct */
-	0,		/* nb_hex */
-	0,		/* nb_inplace_add */
-	0,		/* nb_inplace_subtract */
-	0,		/* nb_inplace_multiply */
-	0,		/* nb_inplace_divide */
-	0,		/* nb_inplace_remainder */
-	0, 		/* nb_inplace_power */
-	0,		/* nb_inplace_lshift */
-	0,		/* nb_inplace_rshift */
-	0,		/* nb_inplace_and */
-	0,		/* nb_inplace_xor */
-	0,		/* nb_inplace_or */
-	float_floor_div, /* nb_floor_divide */
-	float_div,	/* nb_true_divide */
-	0,		/* nb_inplace_floor_divide */
-	0,		/* nb_inplace_true_divide */
+    float_add,          /*nb_add*/
+    float_sub,          /*nb_subtract*/
+    float_mul,          /*nb_multiply*/
+    float_classic_div, /*nb_divide*/
+    float_rem,          /*nb_remainder*/
+    float_divmod,       /*nb_divmod*/
+    float_pow,          /*nb_power*/
+    (unaryfunc)float_neg, /*nb_negative*/
+    (unaryfunc)float_float, /*nb_positive*/
+    (unaryfunc)float_abs, /*nb_absolute*/
+    (inquiry)float_nonzero, /*nb_nonzero*/
+    0,                  /*nb_invert*/
+    0,                  /*nb_lshift*/
+    0,                  /*nb_rshift*/
+    0,                  /*nb_and*/
+    0,                  /*nb_xor*/
+    0,                  /*nb_or*/
+    float_coerce,       /*nb_coerce*/
+    float_trunc,        /*nb_int*/
+    float_long,         /*nb_long*/
+    float_float,        /*nb_float*/
+    0,                  /* nb_oct */
+    0,                  /* nb_hex */
+    0,                  /* nb_inplace_add */
+    0,                  /* nb_inplace_subtract */
+    0,                  /* nb_inplace_multiply */
+    0,                  /* nb_inplace_divide */
+    0,                  /* nb_inplace_remainder */
+    0,                  /* nb_inplace_power */
+    0,                  /* nb_inplace_lshift */
+    0,                  /* nb_inplace_rshift */
+    0,                  /* nb_inplace_and */
+    0,                  /* nb_inplace_xor */
+    0,                  /* nb_inplace_or */
+    float_floor_div, /* nb_floor_divide */
+    float_div,          /* nb_true_divide */
+    0,                  /* nb_inplace_floor_divide */
+    0,                  /* nb_inplace_true_divide */
 };
 
 PyTypeObject PyFloat_Type = {
-	PyVarObject_HEAD_INIT(&PyType_Type, 0)
-	"float",
-	sizeof(PyFloatObject),
-	0,
-	(destructor)float_dealloc,		/* tp_dealloc */
-	(printfunc)float_print, 		/* tp_print */
-	0,					/* tp_getattr */
-	0,					/* tp_setattr */
-	0,			 		/* tp_compare */
-	(reprfunc)float_repr,			/* tp_repr */
-	&float_as_number,			/* tp_as_number */
-	0,					/* tp_as_sequence */
-	0,					/* tp_as_mapping */
-	(hashfunc)float_hash,			/* tp_hash */
-	0,					/* tp_call */
-	(reprfunc)float_str,			/* tp_str */
-	PyObject_GenericGetAttr,		/* tp_getattro */
-	0,					/* tp_setattro */
-	0,					/* tp_as_buffer */
-	Py_TPFLAGS_DEFAULT | Py_TPFLAGS_CHECKTYPES |
-		Py_TPFLAGS_BASETYPE,		/* tp_flags */
-	float_doc,				/* tp_doc */
- 	0,					/* tp_traverse */
-	0,					/* tp_clear */
-	float_richcompare,			/* tp_richcompare */
-	0,					/* tp_weaklistoffset */
-	0,					/* tp_iter */
-	0,					/* tp_iternext */
-	float_methods,				/* tp_methods */
-	0,					/* tp_members */
-	float_getset,				/* tp_getset */
-	0,					/* tp_base */
-	0,					/* tp_dict */
-	0,					/* tp_descr_get */
-	0,					/* tp_descr_set */
-	0,					/* tp_dictoffset */
-	0,					/* tp_init */
-	0,					/* tp_alloc */
-	float_new,				/* tp_new */
+    PyVarObject_HEAD_INIT(&PyType_Type, 0)
+    "float",
+    sizeof(PyFloatObject),
+    0,
+    (destructor)float_dealloc,                  /* tp_dealloc */
+    (printfunc)float_print,                     /* tp_print */
+    0,                                          /* tp_getattr */
+    0,                                          /* tp_setattr */
+    0,                                          /* tp_compare */
+    (reprfunc)float_repr,                       /* tp_repr */
+    &float_as_number,                           /* tp_as_number */
+    0,                                          /* tp_as_sequence */
+    0,                                          /* tp_as_mapping */
+    (hashfunc)float_hash,                       /* tp_hash */
+    0,                                          /* tp_call */
+    (reprfunc)float_str,                        /* tp_str */
+    PyObject_GenericGetAttr,                    /* tp_getattro */
+    0,                                          /* tp_setattro */
+    0,                                          /* tp_as_buffer */
+    Py_TPFLAGS_DEFAULT | Py_TPFLAGS_CHECKTYPES |
+        Py_TPFLAGS_BASETYPE,                    /* tp_flags */
+    float_doc,                                  /* tp_doc */
+    0,                                          /* tp_traverse */
+    0,                                          /* tp_clear */
+    float_richcompare,                          /* tp_richcompare */
+    0,                                          /* tp_weaklistoffset */
+    0,                                          /* tp_iter */
+    0,                                          /* tp_iternext */
+    float_methods,                              /* tp_methods */
+    0,                                          /* tp_members */
+    float_getset,                               /* tp_getset */
+    0,                                          /* tp_base */
+    0,                                          /* tp_dict */
+    0,                                          /* tp_descr_get */
+    0,                                          /* tp_descr_set */
+    0,                                          /* tp_dictoffset */
+    0,                                          /* tp_init */
+    0,                                          /* tp_alloc */
+    float_new,                                  /* tp_new */
 };
 
 void
 _PyFloat_Init(void)
 {
-	/* We attempt to determine if this machine is using IEEE
-	   floating point formats by peering at the bits of some
-	   carefully chosen values.  If it looks like we are on an
-	   IEEE platform, the float packing/unpacking routines can
-	   just copy bits, if not they resort to arithmetic & shifts
-	   and masks.  The shifts & masks approach works on all finite
-	   values, but what happens to infinities, NaNs and signed
-	   zeroes on packing is an accident, and attempting to unpack
-	   a NaN or an infinity will raise an exception.
+    /* We attempt to determine if this machine is using IEEE
+       floating point formats by peering at the bits of some
+       carefully chosen values.  If it looks like we are on an
+       IEEE platform, the float packing/unpacking routines can
+       just copy bits, if not they resort to arithmetic & shifts
+       and masks.  The shifts & masks approach works on all finite
+       values, but what happens to infinities, NaNs and signed
+       zeroes on packing is an accident, and attempting to unpack
+       a NaN or an infinity will raise an exception.
 
-	   Note that if we're on some whacked-out platform which uses
-	   IEEE formats but isn't strictly little-endian or big-
-	   endian, we will fall back to the portable shifts & masks
-	   method. */
+       Note that if we're on some whacked-out platform which uses
+       IEEE formats but isn't strictly little-endian or big-
+       endian, we will fall back to the portable shifts & masks
+       method. */
 
 #if SIZEOF_DOUBLE == 8
-	{
-		double x = 9006104071832581.0;
-		if (memcmp(&x, "\x43\x3f\xff\x01\x02\x03\x04\x05", 8) == 0)
-			detected_double_format = ieee_big_endian_format;
-		else if (memcmp(&x, "\x05\x04\x03\x02\x01\xff\x3f\x43", 8) == 0)
-			detected_double_format = ieee_little_endian_format;
-		else 
-			detected_double_format = unknown_format;
-	}
+    {
+        double x = 9006104071832581.0;
+        if (memcmp(&x, "\x43\x3f\xff\x01\x02\x03\x04\x05", 8) == 0)
+            detected_double_format = ieee_big_endian_format;
+        else if (memcmp(&x, "\x05\x04\x03\x02\x01\xff\x3f\x43", 8) == 0)
+            detected_double_format = ieee_little_endian_format;
+        else
+            detected_double_format = unknown_format;
+    }
 #else
-	detected_double_format = unknown_format;
+    detected_double_format = unknown_format;
 #endif
 
 #if SIZEOF_FLOAT == 4
-	{
-		float y = 16711938.0;
-		if (memcmp(&y, "\x4b\x7f\x01\x02", 4) == 0)
-			detected_float_format = ieee_big_endian_format;
-		else if (memcmp(&y, "\x02\x01\x7f\x4b", 4) == 0)
-			detected_float_format = ieee_little_endian_format;
-		else 
-			detected_float_format = unknown_format;
-	}
+    {
+        float y = 16711938.0;
+        if (memcmp(&y, "\x4b\x7f\x01\x02", 4) == 0)
+            detected_float_format = ieee_big_endian_format;
+        else if (memcmp(&y, "\x02\x01\x7f\x4b", 4) == 0)
+            detected_float_format = ieee_little_endian_format;
+        else
+            detected_float_format = unknown_format;
+    }
 #else
-	detected_float_format = unknown_format;
+    detected_float_format = unknown_format;
 #endif
 
-	double_format = detected_double_format;
-	float_format = detected_float_format;
+    double_format = detected_double_format;
+    float_format = detected_float_format;
 
-	/* Init float info */
-	if (FloatInfoType.tp_name == 0)
-		PyStructSequence_InitType(&FloatInfoType, &floatinfo_desc);
+    /* Init float info */
+    if (FloatInfoType.tp_name == 0)
+        PyStructSequence_InitType(&FloatInfoType, &floatinfo_desc);
 }
 
 int
 PyFloat_ClearFreeList(void)
 {
-	PyFloatObject *p;
-	PyFloatBlock *list, *next;
-	int i;
-	int u;			/* remaining unfreed ints per block */
-	int freelist_size = 0;
+    PyFloatObject *p;
+    PyFloatBlock *list, *next;
+    int i;
+    int u;                      /* remaining unfreed ints per block */
+    int freelist_size = 0;
 
-	list = block_list;
-	block_list = NULL;
-	free_list = NULL;
-	while (list != NULL) {
-		u = 0;
-		for (i = 0, p = &list->objects[0];
-		     i < N_FLOATOBJECTS;
-		     i++, p++) {
-			if (PyFloat_CheckExact(p) && Py_REFCNT(p) != 0)
-				u++;
-		}
-		next = list->next;
-		if (u) {
-			list->next = block_list;
-			block_list = list;
-			for (i = 0, p = &list->objects[0];
-			     i < N_FLOATOBJECTS;
-			     i++, p++) {
-				if (!PyFloat_CheckExact(p) ||
-				    Py_REFCNT(p) == 0) {
-					Py_TYPE(p) = (struct _typeobject *)
-						free_list;
-					free_list = p;
-				}
-			}
-		}
-		else {
-			PyMem_FREE(list);
-		}
-		freelist_size += u;
-		list = next;
-	}
-	return freelist_size;
+    list = block_list;
+    block_list = NULL;
+    free_list = NULL;
+    while (list != NULL) {
+        u = 0;
+        for (i = 0, p = &list->objects[0];
+             i < N_FLOATOBJECTS;
+             i++, p++) {
+            if (PyFloat_CheckExact(p) && Py_REFCNT(p) != 0)
+                u++;
+        }
+        next = list->next;
+        if (u) {
+            list->next = block_list;
+            block_list = list;
+            for (i = 0, p = &list->objects[0];
+                 i < N_FLOATOBJECTS;
+                 i++, p++) {
+                if (!PyFloat_CheckExact(p) ||
+                    Py_REFCNT(p) == 0) {
+                    Py_TYPE(p) = (struct _typeobject *)
+                        free_list;
+                    free_list = p;
+                }
+            }
+        }
+        else {
+            PyMem_FREE(list);
+        }
+        freelist_size += u;
+        list = next;
+    }
+    return freelist_size;
 }
 
 void
 PyFloat_Fini(void)
 {
-	PyFloatObject *p;
-	PyFloatBlock *list;
-	int i;
-	int u;			/* total unfreed floats per block */
+    PyFloatObject *p;
+    PyFloatBlock *list;
+    int i;
+    int u;                      /* total unfreed floats per block */
 
-	u = PyFloat_ClearFreeList();
+    u = PyFloat_ClearFreeList();
 
-	if (!Py_VerboseFlag)
-		return;
-	fprintf(stderr, "# cleanup floats");
-	if (!u) {
-		fprintf(stderr, "\n");
-	}
-	else {
-		fprintf(stderr,
-			": %d unfreed float%s\n",
-			u, u == 1 ? "" : "s");
-	}
-	if (Py_VerboseFlag > 1) {
-		list = block_list;
-		while (list != NULL) {
-			for (i = 0, p = &list->objects[0];
-			     i < N_FLOATOBJECTS;
-			     i++, p++) {
-				if (PyFloat_CheckExact(p) &&
-				    Py_REFCNT(p) != 0) {
-					char buf[100];
-					PyFloat_AsString(buf, p);
-					/* XXX(twouters) cast refcount to
-					   long until %zd is universally
-					   available
-					 */
-					fprintf(stderr,
-			     "#   <float at %p, refcnt=%ld, val=%s>\n",
-						p, (long)Py_REFCNT(p), buf);
-				}
-			}
-			list = list->next;
-		}
-	}
+    if (!Py_VerboseFlag)
+        return;
+    fprintf(stderr, "# cleanup floats");
+    if (!u) {
+        fprintf(stderr, "\n");
+    }
+    else {
+        fprintf(stderr,
+            ": %d unfreed float%s\n",
+            u, u == 1 ? "" : "s");
+    }
+    if (Py_VerboseFlag > 1) {
+        list = block_list;
+        while (list != NULL) {
+            for (i = 0, p = &list->objects[0];
+                 i < N_FLOATOBJECTS;
+                 i++, p++) {
+                if (PyFloat_CheckExact(p) &&
+                    Py_REFCNT(p) != 0) {
+                    char buf[100];
+                    PyFloat_AsString(buf, p);
+                    /* XXX(twouters) cast refcount to
+                       long until %zd is universally
+                       available
+                     */
+                    fprintf(stderr,
+                 "#   <float at %p, refcnt=%ld, val=%s>\n",
+                                    p, (long)Py_REFCNT(p), buf);
+                }
+            }
+            list = list->next;
+        }
+    }
 }
 
 /*----------------------------------------------------------------------------
@@ -2138,406 +2138,406 @@
 int
 _PyFloat_Pack4(double x, unsigned char *p, int le)
 {
-	if (float_format == unknown_format) {
-		unsigned char sign;
-		int e;
-		double f;
-		unsigned int fbits;
-		int incr = 1;
+    if (float_format == unknown_format) {
+        unsigned char sign;
+        int e;
+        double f;
+        unsigned int fbits;
+        int incr = 1;
 
-		if (le) {
-			p += 3;
-			incr = -1;
-		}
+        if (le) {
+            p += 3;
+            incr = -1;
+        }
 
-		if (x < 0) {
-			sign = 1;
-			x = -x;
-		}
-		else
-			sign = 0;
+        if (x < 0) {
+            sign = 1;
+            x = -x;
+        }
+        else
+            sign = 0;
 
-		f = frexp(x, &e);
+        f = frexp(x, &e);
 
-		/* Normalize f to be in the range [1.0, 2.0) */
-		if (0.5 <= f && f < 1.0) {
-			f *= 2.0;
-			e--;
-		}
-		else if (f == 0.0)
-			e = 0;
-		else {
-			PyErr_SetString(PyExc_SystemError,
-					"frexp() result out of range");
-			return -1;
-		}
+        /* Normalize f to be in the range [1.0, 2.0) */
+        if (0.5 <= f && f < 1.0) {
+            f *= 2.0;
+            e--;
+        }
+        else if (f == 0.0)
+            e = 0;
+        else {
+            PyErr_SetString(PyExc_SystemError,
+                            "frexp() result out of range");
+            return -1;
+        }
 
-		if (e >= 128)
-			goto Overflow;
-		else if (e < -126) {
-			/* Gradual underflow */
-			f = ldexp(f, 126 + e);
-			e = 0;
-		}
-		else if (!(e == 0 && f == 0.0)) {
-			e += 127;
-			f -= 1.0; /* Get rid of leading 1 */
-		}
+        if (e >= 128)
+            goto Overflow;
+        else if (e < -126) {
+            /* Gradual underflow */
+            f = ldexp(f, 126 + e);
+            e = 0;
+        }
+        else if (!(e == 0 && f == 0.0)) {
+            e += 127;
+            f -= 1.0; /* Get rid of leading 1 */
+        }
 
-		f *= 8388608.0; /* 2**23 */
-		fbits = (unsigned int)(f + 0.5); /* Round */
-		assert(fbits <= 8388608);
-		if (fbits >> 23) {
-			/* The carry propagated out of a string of 23 1 bits. */
-			fbits = 0;
-			++e;
-			if (e >= 255)
-				goto Overflow;
-		}
+        f *= 8388608.0; /* 2**23 */
+        fbits = (unsigned int)(f + 0.5); /* Round */
+        assert(fbits <= 8388608);
+        if (fbits >> 23) {
+            /* The carry propagated out of a string of 23 1 bits. */
+            fbits = 0;
+            ++e;
+            if (e >= 255)
+                goto Overflow;
+        }
 
-		/* First byte */
-		*p = (sign << 7) | (e >> 1);
-		p += incr;
+        /* First byte */
+        *p = (sign << 7) | (e >> 1);
+        p += incr;
 
-		/* Second byte */
-		*p = (char) (((e & 1) << 7) | (fbits >> 16));
-		p += incr;
+        /* Second byte */
+        *p = (char) (((e & 1) << 7) | (fbits >> 16));
+        p += incr;
 
-		/* Third byte */
-		*p = (fbits >> 8) & 0xFF;
-		p += incr;
+        /* Third byte */
+        *p = (fbits >> 8) & 0xFF;
+        p += incr;
 
-		/* Fourth byte */
-		*p = fbits & 0xFF;
+        /* Fourth byte */
+        *p = fbits & 0xFF;
 
-		/* Done */
-		return 0;
+        /* Done */
+        return 0;
 
-	}
-	else {
-		float y = (float)x;
-		const char *s = (char*)&y;
-		int i, incr = 1;
+    }
+    else {
+        float y = (float)x;
+        const char *s = (char*)&y;
+        int i, incr = 1;
 
-		if (Py_IS_INFINITY(y) && !Py_IS_INFINITY(x))
-			goto Overflow;
+        if (Py_IS_INFINITY(y) && !Py_IS_INFINITY(x))
+            goto Overflow;
 
-		if ((float_format == ieee_little_endian_format && !le)
-		    || (float_format == ieee_big_endian_format && le)) {
-			p += 3;
-			incr = -1;
-		}
+        if ((float_format == ieee_little_endian_format && !le)
+            || (float_format == ieee_big_endian_format && le)) {
+            p += 3;
+            incr = -1;
+        }
 
-		for (i = 0; i < 4; i++) {
-			*p = *s++;
-			p += incr;
-		}
-		return 0;
-	}
+        for (i = 0; i < 4; i++) {
+            *p = *s++;
+            p += incr;
+        }
+        return 0;
+    }
   Overflow:
-	PyErr_SetString(PyExc_OverflowError,
-			"float too large to pack with f format");
-	return -1;
+    PyErr_SetString(PyExc_OverflowError,
+                    "float too large to pack with f format");
+    return -1;
 }
 
 int
 _PyFloat_Pack8(double x, unsigned char *p, int le)
 {
-	if (double_format == unknown_format) {
-		unsigned char sign;
-		int e;
-		double f;
-		unsigned int fhi, flo;
-		int incr = 1;
+    if (double_format == unknown_format) {
+        unsigned char sign;
+        int e;
+        double f;
+        unsigned int fhi, flo;
+        int incr = 1;
 
-		if (le) {
-			p += 7;
-			incr = -1;
-		}
+        if (le) {
+            p += 7;
+            incr = -1;
+        }
 
-		if (x < 0) {
-			sign = 1;
-			x = -x;
-		}
-		else
-			sign = 0;
+        if (x < 0) {
+            sign = 1;
+            x = -x;
+        }
+        else
+            sign = 0;
 
-		f = frexp(x, &e);
+        f = frexp(x, &e);
 
-		/* Normalize f to be in the range [1.0, 2.0) */
-		if (0.5 <= f && f < 1.0) {
-			f *= 2.0;
-			e--;
-		}
-		else if (f == 0.0)
-			e = 0;
-		else {
-			PyErr_SetString(PyExc_SystemError,
-					"frexp() result out of range");
-			return -1;
-		}
+        /* Normalize f to be in the range [1.0, 2.0) */
+        if (0.5 <= f && f < 1.0) {
+            f *= 2.0;
+            e--;
+        }
+        else if (f == 0.0)
+            e = 0;
+        else {
+            PyErr_SetString(PyExc_SystemError,
+                            "frexp() result out of range");
+            return -1;
+        }
 
-		if (e >= 1024)
-			goto Overflow;
-		else if (e < -1022) {
-			/* Gradual underflow */
-			f = ldexp(f, 1022 + e);
-			e = 0;
-		}
-		else if (!(e == 0 && f == 0.0)) {
-			e += 1023;
-			f -= 1.0; /* Get rid of leading 1 */
-		}
+        if (e >= 1024)
+            goto Overflow;
+        else if (e < -1022) {
+            /* Gradual underflow */
+            f = ldexp(f, 1022 + e);
+            e = 0;
+        }
+        else if (!(e == 0 && f == 0.0)) {
+            e += 1023;
+            f -= 1.0; /* Get rid of leading 1 */
+        }
 
-		/* fhi receives the high 28 bits; flo the low 24 bits (== 52 bits) */
-		f *= 268435456.0; /* 2**28 */
-		fhi = (unsigned int)f; /* Truncate */
-		assert(fhi < 268435456);
+        /* fhi receives the high 28 bits; flo the low 24 bits (== 52 bits) */
+        f *= 268435456.0; /* 2**28 */
+        fhi = (unsigned int)f; /* Truncate */
+        assert(fhi < 268435456);
 
-		f -= (double)fhi;
-		f *= 16777216.0; /* 2**24 */
-		flo = (unsigned int)(f + 0.5); /* Round */
-		assert(flo <= 16777216);
-		if (flo >> 24) {
-			/* The carry propagated out of a string of 24 1 bits. */
-			flo = 0;
-			++fhi;
-			if (fhi >> 28) {
-				/* And it also progagated out of the next 28 bits. */
-				fhi = 0;
-				++e;
-				if (e >= 2047)
-					goto Overflow;
-			}
-		}
+        f -= (double)fhi;
+        f *= 16777216.0; /* 2**24 */
+        flo = (unsigned int)(f + 0.5); /* Round */
+        assert(flo <= 16777216);
+        if (flo >> 24) {
+            /* The carry propagated out of a string of 24 1 bits. */
+            flo = 0;
+            ++fhi;
+            if (fhi >> 28) {
+                /* And it also progagated out of the next 28 bits. */
+                fhi = 0;
+                ++e;
+                if (e >= 2047)
+                    goto Overflow;
+            }
+        }
 
-		/* First byte */
-		*p = (sign << 7) | (e >> 4);
-		p += incr;
+        /* First byte */
+        *p = (sign << 7) | (e >> 4);
+        p += incr;
 
-		/* Second byte */
-		*p = (unsigned char) (((e & 0xF) << 4) | (fhi >> 24));
-		p += incr;
+        /* Second byte */
+        *p = (unsigned char) (((e & 0xF) << 4) | (fhi >> 24));
+        p += incr;
 
-		/* Third byte */
-		*p = (fhi >> 16) & 0xFF;
-		p += incr;
+        /* Third byte */
+        *p = (fhi >> 16) & 0xFF;
+        p += incr;
 
-		/* Fourth byte */
-		*p = (fhi >> 8) & 0xFF;
-		p += incr;
+        /* Fourth byte */
+        *p = (fhi >> 8) & 0xFF;
+        p += incr;
 
-		/* Fifth byte */
-		*p = fhi & 0xFF;
-		p += incr;
+        /* Fifth byte */
+        *p = fhi & 0xFF;
+        p += incr;
 
-		/* Sixth byte */
-		*p = (flo >> 16) & 0xFF;
-		p += incr;
+        /* Sixth byte */
+        *p = (flo >> 16) & 0xFF;
+        p += incr;
 
-		/* Seventh byte */
-		*p = (flo >> 8) & 0xFF;
-		p += incr;
+        /* Seventh byte */
+        *p = (flo >> 8) & 0xFF;
+        p += incr;
 
-		/* Eighth byte */
-		*p = flo & 0xFF;
-		p += incr;
+        /* Eighth byte */
+        *p = flo & 0xFF;
+        p += incr;
 
-		/* Done */
-		return 0;
+        /* Done */
+        return 0;
 
-	  Overflow:
-		PyErr_SetString(PyExc_OverflowError,
-				"float too large to pack with d format");
-		return -1;
-	}
-	else {
-		const char *s = (char*)&x;
-		int i, incr = 1;
+      Overflow:
+        PyErr_SetString(PyExc_OverflowError,
+                        "float too large to pack with d format");
+        return -1;
+    }
+    else {
+        const char *s = (char*)&x;
+        int i, incr = 1;
 
-		if ((double_format == ieee_little_endian_format && !le)
-		    || (double_format == ieee_big_endian_format && le)) {
-			p += 7;
-			incr = -1;
-		}
-		
-		for (i = 0; i < 8; i++) {
-			*p = *s++;
-			p += incr;
-		}
-		return 0;
-	}
+        if ((double_format == ieee_little_endian_format && !le)
+            || (double_format == ieee_big_endian_format && le)) {
+            p += 7;
+            incr = -1;
+        }
+
+        for (i = 0; i < 8; i++) {
+            *p = *s++;
+            p += incr;
+        }
+        return 0;
+    }
 }
 
 double
 _PyFloat_Unpack4(const unsigned char *p, int le)
 {
-	if (float_format == unknown_format) {
-		unsigned char sign;
-		int e;
-		unsigned int f;
-		double x;
-		int incr = 1;
+    if (float_format == unknown_format) {
+        unsigned char sign;
+        int e;
+        unsigned int f;
+        double x;
+        int incr = 1;
 
-		if (le) {
-			p += 3;
-			incr = -1;
-		}
+        if (le) {
+            p += 3;
+            incr = -1;
+        }
 
-		/* First byte */
-		sign = (*p >> 7) & 1;
-		e = (*p & 0x7F) << 1;
-		p += incr;
+        /* First byte */
+        sign = (*p >> 7) & 1;
+        e = (*p & 0x7F) << 1;
+        p += incr;
 
-		/* Second byte */
-		e |= (*p >> 7) & 1;
-		f = (*p & 0x7F) << 16;
-		p += incr;
+        /* Second byte */
+        e |= (*p >> 7) & 1;
+        f = (*p & 0x7F) << 16;
+        p += incr;
 
-		if (e == 255) {
-			PyErr_SetString(
-				PyExc_ValueError,
-				"can't unpack IEEE 754 special value "
-				"on non-IEEE platform");
-			return -1;
-		}
+        if (e == 255) {
+            PyErr_SetString(
+                PyExc_ValueError,
+                "can't unpack IEEE 754 special value "
+                "on non-IEEE platform");
+            return -1;
+        }
 
-		/* Third byte */
-		f |= *p << 8;
-		p += incr;
+        /* Third byte */
+        f |= *p << 8;
+        p += incr;
 
-		/* Fourth byte */
-		f |= *p;
+        /* Fourth byte */
+        f |= *p;
 
-		x = (double)f / 8388608.0;
+        x = (double)f / 8388608.0;
 
-		/* XXX This sadly ignores Inf/NaN issues */
-		if (e == 0)
-			e = -126;
-		else {
-			x += 1.0;
-			e -= 127;
-		}
-		x = ldexp(x, e);
+        /* XXX This sadly ignores Inf/NaN issues */
+        if (e == 0)
+            e = -126;
+        else {
+            x += 1.0;
+            e -= 127;
+        }
+        x = ldexp(x, e);
 
-		if (sign)
-			x = -x;
+        if (sign)
+            x = -x;
 
-		return x;
-	}
-	else {
-		float x;
+        return x;
+    }
+    else {
+        float x;
 
-		if ((float_format == ieee_little_endian_format && !le)
-		    || (float_format == ieee_big_endian_format && le)) {
-			char buf[4];
-			char *d = &buf[3];
-			int i;
+        if ((float_format == ieee_little_endian_format && !le)
+            || (float_format == ieee_big_endian_format && le)) {
+            char buf[4];
+            char *d = &buf[3];
+            int i;
 
-			for (i = 0; i < 4; i++) {
-				*d-- = *p++;
-			}
-			memcpy(&x, buf, 4);
-		}
-		else {
-			memcpy(&x, p, 4);
-		}
+            for (i = 0; i < 4; i++) {
+                *d-- = *p++;
+            }
+            memcpy(&x, buf, 4);
+        }
+        else {
+            memcpy(&x, p, 4);
+        }
 
-		return x;
-	}		
+        return x;
+    }
 }
 
 double
 _PyFloat_Unpack8(const unsigned char *p, int le)
 {
-	if (double_format == unknown_format) {
-		unsigned char sign;
-		int e;
-		unsigned int fhi, flo;
-		double x;
-		int incr = 1;
+    if (double_format == unknown_format) {
+        unsigned char sign;
+        int e;
+        unsigned int fhi, flo;
+        double x;
+        int incr = 1;
 
-		if (le) {
-			p += 7;
-			incr = -1;
-		}
+        if (le) {
+            p += 7;
+            incr = -1;
+        }
 
-		/* First byte */
-		sign = (*p >> 7) & 1;
-		e = (*p & 0x7F) << 4;
-		
-		p += incr;
+        /* First byte */
+        sign = (*p >> 7) & 1;
+        e = (*p & 0x7F) << 4;
 
-		/* Second byte */
-		e |= (*p >> 4) & 0xF;
-		fhi = (*p & 0xF) << 24;
-		p += incr;
+        p += incr;
 
-		if (e == 2047) {
-			PyErr_SetString(
-				PyExc_ValueError,
-				"can't unpack IEEE 754 special value "
-				"on non-IEEE platform");
-			return -1.0;
-		}
+        /* Second byte */
+        e |= (*p >> 4) & 0xF;
+        fhi = (*p & 0xF) << 24;
+        p += incr;
 
-		/* Third byte */
-		fhi |= *p << 16;
-		p += incr;
+        if (e == 2047) {
+            PyErr_SetString(
+                PyExc_ValueError,
+                "can't unpack IEEE 754 special value "
+                "on non-IEEE platform");
+            return -1.0;
+        }
 
-		/* Fourth byte */
-		fhi |= *p  << 8;
-		p += incr;
+        /* Third byte */
+        fhi |= *p << 16;
+        p += incr;
 
-		/* Fifth byte */
-		fhi |= *p;
-		p += incr;
+        /* Fourth byte */
+        fhi |= *p  << 8;
+        p += incr;
 
-		/* Sixth byte */
-		flo = *p << 16;
-		p += incr;
+        /* Fifth byte */
+        fhi |= *p;
+        p += incr;
 
-		/* Seventh byte */
-		flo |= *p << 8;
-		p += incr;
+        /* Sixth byte */
+        flo = *p << 16;
+        p += incr;
 
-		/* Eighth byte */
-		flo |= *p;
+        /* Seventh byte */
+        flo |= *p << 8;
+        p += incr;
 
-		x = (double)fhi + (double)flo / 16777216.0; /* 2**24 */
-		x /= 268435456.0; /* 2**28 */
+        /* Eighth byte */
+        flo |= *p;
 
-		if (e == 0)
-			e = -1022;
-		else {
-			x += 1.0;
-			e -= 1023;
-		}
-		x = ldexp(x, e);
+        x = (double)fhi + (double)flo / 16777216.0; /* 2**24 */
+        x /= 268435456.0; /* 2**28 */
 
-		if (sign)
-			x = -x;
+        if (e == 0)
+            e = -1022;
+        else {
+            x += 1.0;
+            e -= 1023;
+        }
+        x = ldexp(x, e);
 
-		return x;
-	}
-	else {
-		double x;
+        if (sign)
+            x = -x;
 
-		if ((double_format == ieee_little_endian_format && !le)
-		    || (double_format == ieee_big_endian_format && le)) {
-			char buf[8];
-			char *d = &buf[7];
-			int i;
-			
-			for (i = 0; i < 8; i++) {
-				*d-- = *p++;
-			}
-			memcpy(&x, buf, 8);
-		}
-		else {
-			memcpy(&x, p, 8);
-		}
+        return x;
+    }
+    else {
+        double x;
 
-		return x;
-	}
+        if ((double_format == ieee_little_endian_format && !le)
+            || (double_format == ieee_big_endian_format && le)) {
+            char buf[8];
+            char *d = &buf[7];
+            int i;
+
+            for (i = 0; i < 8; i++) {
+                *d-- = *p++;
+            }
+            memcpy(&x, buf, 8);
+        }
+        else {
+            memcpy(&x, p, 8);
+        }
+
+        return x;
+    }
 }