Added some files to new module
diff --git a/Modules/Makefile.pre.in b/Modules/Makefile.pre.in
new file mode 100644
index 0000000..e8e4a20
--- /dev/null
+++ b/Modules/Makefile.pre.in
@@ -0,0 +1,92 @@
+# NOTE: Makefile.in.in is converted into Makefile.in by running the
+# makesetup script in the current directory.  Makefile.in is converted
+# into Makefile by the configure script in the toplevel directory.
+# Once Makefile exists, it can be brought up to date by running
+# "make Makefile".
+
+# === Variables set by ./makesetup ===
+
+MODOBJS=	@MODOBJS@
+MODLIBS=	@MODLIBS@
+MODCPPS=	@MODCPPS@
+
+# === Definitions added by ./makesetup ===
+
+# === Variables set by $(TOP)/configure ===
+
+srcdir=		@srcdir@
+VPATH=		@srcdir@
+
+CC=		@CC@
+RANLIB=		@RANLIB@
+DEFS=		@DEFS@
+LIBS=		@LIBS@
+
+
+# === Variables that are customizable by hand ===
+
+TOP=		..
+INCLDIR=	$(TOP)/Include
+OPT=		-g
+CFLAGS=		$(OPT) -I$(INCLDIR) $(DEFS)
+
+AR=		ar
+MKDEP=		mkdep
+SHELL=		/bin/sh
+
+
+# === Fixed definitions ===
+
+OBJS=		$(MODOBJS)
+
+LIB=		libModules.a
+
+MYLIBS=		$(LIB) \
+		../Python/libPython.a \
+		../Objects/libObjects.a \
+		../Parser/libParser.a
+
+SYSLIBS=	$(MODLIBS) -lm
+
+
+# === Rules ===
+
+all:		$(LIB) $(TOP)/python
+
+$(LIB):		$(OBJS)
+		$(AR) cr $(LIB) $(OBJS)
+		$(RANLIB) $(LIB)
+
+$(TOP)/python:	config.o $(MYLIBS)
+		$(CC) config.o $(MYLIBS) $(LIBS) $(SYSLIBS) -o python
+		mv python $(TOP)/python
+
+config.o:	Makefile
+
+clean:
+		-rm -f *.o python core *~ [@,#]* *.old *.orig *.rej
+
+clobber:	clean
+		-rm -f *.a tags TAGS
+
+Makefile:	Makefile.in $(TOP)/config.status
+		CONFIG_FILES=Makefile CONFIG_HEADERS= \
+		$(SHELL) $(TOP)/config.status
+
+config.c Makefile.in:	Makefile.in.in config.c.in Setup makesetup
+		$(SHELL) ./makesetup Setup
+
+depend:
+		$(MKDEP) $(CFLAGS) \
+			`echo $(OBJS) | tr ' ' '\012' | sed 's/\.o/.c/'`
+
+.PRECIOUS:	Makefile.in Makefile config.c
+
+glmodule.c:	cgen.py cstubs
+		python cgen.py <cstubs >glmodule.c
+
+# === Rules added by ./makesetup ===
+
+# DO NOT DELETE THIS LINE -- mkdep uses it.
+# DO NOT PUT ANYTHING AFTER THIS LINE, IT WILL GO AWAY.
+# IF YOU PUT ANYTHING HERE IT WILL GO AWAY
diff --git a/Modules/Setup.in b/Modules/Setup.in
new file mode 100644
index 0000000..7dd40fd
--- /dev/null
+++ b/Modules/Setup.in
@@ -0,0 +1,139 @@
+# This file is used by the makesetup script to construct Makefile.in
+# and config.c, from Makefile.in.in (sic!) and config.c.in,
+# respectively.
+#
+# Each line in this file describes one or more optional modules.
+# Comment out lines to suppress modules.
+# Lines have the following structure:
+#
+# <module> ... [<objectfile> ...] [<cpparg> ...] [<library> ...]
+#
+# <objectfile> is anything ending in .o
+# <cpparg> is anything starting with -I, -D, -U or -C
+# <library> is anything ending in .a or beginning with -l or -L
+# <module> is anything else but should be a valid Python
+# identifier (letters, digits, underscores, beginning with non-digit)
+#
+# Lines can also have the form
+#
+# <name> = <value>
+#
+# which defines a Make variable definition inserted into Makefile.in
+#
+# NOTE: As a standard policy, as many modules as can be supported by a
+# platform should be present.  The distribution comes with all modules
+# enabled that are supported by most platforms and don't require you
+# to ftp sources from elsewhere.  To make this easier for SGI
+# platforms, you can copy Setup.sgi to Setup (or edit Makefile.in.in
+# to use Setup.sgi instead of Setup).
+
+
+# Modules that should always be present (non UNIX dependent)
+
+array arraymodule.o	# array objects
+math mathmodule.o	# math library functions, e.g. sin()
+parser parsermodule.o	# raw interface to the Python parser
+posix posixmodule.o	# posix (UNIX) system calls
+regex regexmodule.o regexpr.o	# Regular expressions, GNU Emacs style
+strop stropmodule.o	# fast string operations implemented in C
+struct structmodule.o	# binary structure packing/unpacking
+time timemodule.o	# time operations and variables
+
+
+# Modules with some UNIX dependencies -- on by default.
+# Note that some UNIX versions still don't support all of these
+# so you may have to comment them out before the build completes.
+
+dbm dbmmodule.o		# dbm(3) may require -ldbm or similar
+fcntl fcntlmodule.o	# fcntl(2) and ioctl(2)
+nis nismodule.o		# Sun yellow pages -- not everywhere
+pwd grp pwdmodule.o	# pwd(3) and grp(3)
+select selectmodule.o	# select(2); not on ancient System V
+socket socketmodule.o	# socket(2); not on ancient System V
+
+
+# Multimedia modules -- off by default
+# These represent audio samples or images as strings
+
+audioop audioopmodule.o # Operations on audio samples
+imageop imageopmodule.o # Operations on images
+rgbimg rgbimgmodule.o   # Read SGI RGB image files (but coded portably)
+
+
+# The stdwin module provides a simple, portable (between X11 and Mac)
+# windowing interface.  You need to ftp the STDWIN library, e.g. from
+# ftp://ftp.cwi.nl/pub/stdwin.  The STDWIN variable must point to the
+# STDWIN toplevel directory.  The ARCH variable must be set to the
+# architecture identifier used to build STDWIN.  NB if you combine this
+# with the gl module on an SGI machine, you should replace "-lX11" with
+# "-lX11_s".
+
+#STDWIN=/ufs/guido/src/stdwin
+#ARCH=sgi
+#stdwin stdwinmodule.o -I$(STDWIN)/H $(STDWIN)/Build/$(ARCH)/x11/lib/lib.a -lX11
+
+
+# The md5 module implements the RSA Data Security, Inc. MD5
+# Message-Digest Algorithm, described in RFC 1321.  The necessary files
+# md5c.c and md5.h are included here.
+
+md5 md5module.o md5c.o
+
+
+# The mpz module interfaces to the GNU Multiple Precision library.
+# You need to ftp the GNU MP library.  This was last tested with a
+# somewhat modified (to get around bugs) version of GMP 1.2; it will
+# likely need some work for more recent versions.  The GMP variable
+# must point to the GMP source directory.
+
+#GMP=/ufs/guido/src/gmp
+#mpz mpzmodule.o -I$(GMP) $(GMP)/libgmp.a
+
+
+# The rotor module (contributed by Lance Ellinghouse) implements a
+# rotor-based encryption algorithm.  It is self-contained.
+
+rotor rotormodule.o
+
+
+# SGI IRIX specific modules -- off by default.
+# Switch this on if you have an SGI machine.
+# Note that some required libraries and header files aren't always
+# installed; you may be better off switching on only 'fm' and 'gl'
+# (Font Manager and Graphics Library).
+
+#al almodule.o -laudio		# audio
+#cd cdmodule.o -lcdaudio -lds	#
+#cl clmodule.o -lcl
+#fm fmmodule.o -lfm_s -lgl_s
+#gl glmodule.o -lgl_s
+#imgfile imgfilemodule.o -limage -lgutil -lm
+#sgi sgimodule.o
+#sv svmodule.o yuvconvert.o -lsvideo -lXext -lX11_s
+
+# The FORMS library, by Mark Overmars, implements user interface
+# components such as dialogs and buttons using SGI's GL and FM
+# libraries.  You must ftp the FORMS library separately from
+# ftp://ftp.cs.ruu.nl/pub/SGI/FORMS.  It was tested with FORMS 2.2a.
+# The FORMS variable must point to the FORMS subdirectory of the forms
+# toplevel directory.
+
+#FORMS=/ufs/guido/src/forms/FORMS
+#fl flmodule.o -I$(FORMS) $(FORMS)/libforms.a
+
+
+# SunOS specific modules -- off by default
+
+# sunaudiodev sunaudiodevmodule.o
+
+
+# Thread module -- works on SGI IRIX and on SunOS 5.x (SOLARIS) only.
+# Note that you must have configured (and built!) Python with the
+# --with-thread option passed to the configure script for this to work.
+
+# thread threadmodule.o
+
+
+# Example -- included for reference only
+
+# xx xxmodule.o
diff --git a/Modules/makesetup b/Modules/makesetup
new file mode 100755
index 0000000..b5cc57b
--- /dev/null
+++ b/Modules/makesetup
@@ -0,0 +1,71 @@
+#! /bin/sh
+
+# This script converts Makefile.in.in and config.c.in into Makefile.in
+# and config.c, based on the module definitions found in the file
+# Setup.
+
+NL="\\
+"
+
+sed -e 's/#.*//' -e '/^[ 	]*$/d' ${1-Setup} |
+(
+	DEFS=
+	MODS=
+	OBJS=
+	LIBS=
+	RULES=
+
+	while read line
+	do
+		case $line in
+		*=*)	DEFS="$DEFS$line$NL"; continue;;
+		esac
+		objs=
+		cpps=
+		set $line
+		for arg
+		do
+			case $arg in
+			-[IDUC]*)	cpps="$cpps $arg";;
+			-[Ll]*)		LIBS="$LIBS $arg";;
+			*.a)		LIBS="$LIBS $arg";;
+			*.o)		objs="$objs $arg";;
+			*.*)		echo 1>&2 "bad word $arg in $line"
+					exit 1;;
+			[a-zA-Z_]*)	MODS="$MODS $arg";;
+			*)		echo 1>&2 "bad word $arg in $line"
+					exit 1;;
+			esac
+		done
+		for obj in $objs
+		do
+		  src=`basename $obj .o`.c
+		  RULES="$RULES$obj: $src; \$(CC) \$(CFLAGS) $cpps -c $src$NL"
+		done
+		OBJS="$OBJS $objs"
+	done
+
+	EXTDECLS=
+	INITBITS=
+	for mod in $MODS
+	do
+		EXTDECLS="${EXTDECLS}extern void init$mod();$NL"
+		INITBITS="${INITBITS}	{\"$mod\", init$mod},$NL"
+	done
+	sed -e "
+		/MARKER 1/i$NL$EXTDECLS
+
+		/MARKER 2/i$NL$INITBITS
+
+		" config.c.in >config.c
+
+	sed -e "
+		s%@MODOBJS@%$OBJS%
+		s%@MODLIBS@%$LIBS%
+		/Rules added by ..makesetup/a$NL$NL$RULES
+		
+		/Definitions added by ..makesetup/a$NL$NL$DEFS
+		
+		" Makefile.in.in >Makefile.in
+
+)