Remove svn:mime-type (inexplicably set to a binary type),
and set svn:eol-style to native, on some text files.
diff --git a/PC/example_nt/readme.txt b/PC/example_nt/readme.txt
index 65665ba..37a9c29 100644
--- a/PC/example_nt/readme.txt
+++ b/PC/example_nt/readme.txt
@@ -1,161 +1,161 @@
-Example Python extension for Windows NT
-=======================================
-
-This directory contains everything needed (except for the Python
-distribution!) to build a Python extension module using Microsoft VC++
-("Developer Studio") version 7.1. It has been tested with VC++ 7.1 on
-Python 2.4. You can also use earlier versions of VC to build Python
-extensions, but the sample VC project file (example.dsw in this directory)
-is in VC 7.1 format. Notice that you need to use the same compiler version
-that was used to build Python itself.
-
-COPY THIS DIRECTORY!
---------------------
-This "example_nt" directory is a subdirectory of the PC directory, in order
-to keep all the PC-specific files under the same directory. However, the
-example_nt directory can't actually be used from this location. You first
-need to copy or move it up one level, so that example_nt is a direct
-sibling of the PC\ and Include\ directories. Do all your work from within
-this new location -- sorry, but you'll be sorry if you don't.
-
-OPEN THE PROJECT
-----------------
-From VC 7.1, use the
- File -> Open Solution...
-dialog (*not* the "File -> Open..." dialog!). Navigate to and select the
-file "example.sln", in the *copy* of the example_nt directory you made
-above.
-Click Open.
-
-BUILD THE EXAMPLE DLL
----------------------
-In order to check that everything is set up right, try building:
-
-1. Select a configuration. This step is optional. Do
- Build -> Configuration Manager... -> Active Solution Configuration
- and select either "Release" or "Debug".
- If you skip this step, you'll use the Debug configuration by default.
-
-2. Build the DLL. Do
- Build -> Build Solution
- This creates all intermediate and result files in a subdirectory which
- is called either Debug or Release, depending on which configuration you
- picked in the preceding step.
-
-TESTING THE DEBUG-MODE DLL
---------------------------
-Once the Debug build has succeeded, bring up a DOS box, and cd to
-example_nt\Debug. You should now be able to repeat the following session
-("C>" is the DOS prompt, ">>>" is the Python prompt) (note that various
-debug output from Python may not match this screen dump exactly):
-
- C>..\..\PCbuild\python_d
- Adding parser accelerators ...
- Done.
- Python 2.2c1+ (#28, Dec 14 2001, 18:06:39) [MSC 32 bit (Intel)] on win32
- Type "help", "copyright", "credits" or "license" for more information.
- >>> import example
- [7052 refs]
- >>> example.foo()
- Hello, world
- [7052 refs]
- >>>
-
-TESTING THE RELEASE-MODE DLL
-----------------------------
-Once the Release build has succeeded, bring up a DOS box, and cd to
-example_nt\Release. You should now be able to repeat the following session
-("C>" is the DOS prompt, ">>>" is the Python prompt):
-
- C>..\..\PCbuild\python
- Python 2.2c1+ (#28, Dec 14 2001, 18:06:04) [MSC 32 bit (Intel)] on win32
- Type "help", "copyright", "credits" or "license" for more information.
- >>> import example
- >>> example.foo()
- Hello, world
- >>>
-
-Congratulations! You've successfully built your first Python extension
-module.
-
-CREATING YOUR OWN PROJECT
--------------------------
-Choose a name ("spam" is always a winner :-) and create a directory for
-it. Copy your C sources into it. Note that the module source file name
-does not necessarily have to match the module name, but the "init" function
-name should match the module name -- i.e. you can only import a module
-"spam" if its init function is called "initspam()", and it should call
-Py_InitModule with the string "spam" as its first argument (use the minimal
-example.c in this directory as a guide). By convention, it lives in a file
-called "spam.c" or "spammodule.c". The output file should be called
-"spam.dll" or "spam.pyd" (the latter is supported to avoid confusion with a
-system library "spam.dll" to which your module could be a Python interface)
-in Release mode, or spam_d.dll or spam_d.pyd in Debug mode.
-
-Now your options are:
-
-1) Copy example.sln and example.vcproj, rename them to spam.*, and edit them
-by hand.
-
-or
-
-2) Create a brand new project; instructions are below.
-
-In either case, copy example_nt\example.def to spam\spam.def, and edit the
-new spam.def so its second line contains the string "initspam". If you
-created a new project yourself, add the file spam.def to the project now.
-(This is an annoying little file with only two lines. An alternative
-approach is to forget about the .def file, and add the option
-"/export:initspam" somewhere to the Link settings, by manually editing the
-"Project -> Properties -> Linker -> Command Line -> Additional Options"
-box).
-
-You are now all set to build your extension, unless it requires other
-external libraries, include files, etc. See Python's Extending and
-Embedding manual for instructions on how to write an extension.
-
-
-CREATING A BRAND NEW PROJECT
-----------------------------
-Use the
- File -> New -> Project...
-dialog to create a new Project Workspace. Select "Visual C++ Projects/Win32/
-Win32 Project", enter the name ("spam"), and make sure the "Location" is
-set to parent of the spam directory you have created (which should be a direct
-subdirectory of the Python build tree, a sibling of Include and PC).
-In "Application Settings", select "DLL", and "Empty Project". Click OK.
-
-You should now create the file spam.def as instructed in the previous
-section. Add the source files (including the .def file) to the project,
-using "Project", "Add Existing Item".
-
-Now open the
- Project -> spam properties...
-dialog. (Impressive, isn't it? :-) You only need to change a few
-settings. Make sure "All Configurations" is selected from the "Settings
-for:" dropdown list. Select the "C/C++" tab. Choose the "General"
-category in the popup menu at the top. Type the following text in the
-entry box labeled "Addditional Include Directories:"
-
- ..\Include,..\PC
-
-Then, choose the "General" category in the "Linker" tab, and enter
- ..\PCbuild
-in the "Additional library Directories" box.
-
-Now you need to add some mode-specific settings (select "Accept"
-when asked to confirm your changes):
-
-Select "Release" in the "Configuration" dropdown list. Click the
-"Link" tab, choose the "Input" Category, and append "python24.lib" to the
-list in the "Additional Dependencies" box.
-
-Select "Debug" in the "Settings for:" dropdown list, and append
-"python24_d.lib" to the list in the Additional Dependencies" box. Then
-click on the C/C++ tab, select "Code Generation", and select
-"Multi-threaded Debug DLL" from the "Runtime library" dropdown list.
-
-Select "Release" again from the "Settings for:" dropdown list.
-Select "Multi-threaded DLL" from the "Use run-time library:" dropdown list.
-
-That's all <wink>.
+Example Python extension for Windows NT
+=======================================
+
+This directory contains everything needed (except for the Python
+distribution!) to build a Python extension module using Microsoft VC++
+("Developer Studio") version 7.1. It has been tested with VC++ 7.1 on
+Python 2.4. You can also use earlier versions of VC to build Python
+extensions, but the sample VC project file (example.dsw in this directory)
+is in VC 7.1 format. Notice that you need to use the same compiler version
+that was used to build Python itself.
+
+COPY THIS DIRECTORY!
+--------------------
+This "example_nt" directory is a subdirectory of the PC directory, in order
+to keep all the PC-specific files under the same directory. However, the
+example_nt directory can't actually be used from this location. You first
+need to copy or move it up one level, so that example_nt is a direct
+sibling of the PC\ and Include\ directories. Do all your work from within
+this new location -- sorry, but you'll be sorry if you don't.
+
+OPEN THE PROJECT
+----------------
+From VC 7.1, use the
+ File -> Open Solution...
+dialog (*not* the "File -> Open..." dialog!). Navigate to and select the
+file "example.sln", in the *copy* of the example_nt directory you made
+above.
+Click Open.
+
+BUILD THE EXAMPLE DLL
+---------------------
+In order to check that everything is set up right, try building:
+
+1. Select a configuration. This step is optional. Do
+ Build -> Configuration Manager... -> Active Solution Configuration
+ and select either "Release" or "Debug".
+ If you skip this step, you'll use the Debug configuration by default.
+
+2. Build the DLL. Do
+ Build -> Build Solution
+ This creates all intermediate and result files in a subdirectory which
+ is called either Debug or Release, depending on which configuration you
+ picked in the preceding step.
+
+TESTING THE DEBUG-MODE DLL
+--------------------------
+Once the Debug build has succeeded, bring up a DOS box, and cd to
+example_nt\Debug. You should now be able to repeat the following session
+("C>" is the DOS prompt, ">>>" is the Python prompt) (note that various
+debug output from Python may not match this screen dump exactly):
+
+ C>..\..\PCbuild\python_d
+ Adding parser accelerators ...
+ Done.
+ Python 2.2c1+ (#28, Dec 14 2001, 18:06:39) [MSC 32 bit (Intel)] on win32
+ Type "help", "copyright", "credits" or "license" for more information.
+ >>> import example
+ [7052 refs]
+ >>> example.foo()
+ Hello, world
+ [7052 refs]
+ >>>
+
+TESTING THE RELEASE-MODE DLL
+----------------------------
+Once the Release build has succeeded, bring up a DOS box, and cd to
+example_nt\Release. You should now be able to repeat the following session
+("C>" is the DOS prompt, ">>>" is the Python prompt):
+
+ C>..\..\PCbuild\python
+ Python 2.2c1+ (#28, Dec 14 2001, 18:06:04) [MSC 32 bit (Intel)] on win32
+ Type "help", "copyright", "credits" or "license" for more information.
+ >>> import example
+ >>> example.foo()
+ Hello, world
+ >>>
+
+Congratulations! You've successfully built your first Python extension
+module.
+
+CREATING YOUR OWN PROJECT
+-------------------------
+Choose a name ("spam" is always a winner :-) and create a directory for
+it. Copy your C sources into it. Note that the module source file name
+does not necessarily have to match the module name, but the "init" function
+name should match the module name -- i.e. you can only import a module
+"spam" if its init function is called "initspam()", and it should call
+Py_InitModule with the string "spam" as its first argument (use the minimal
+example.c in this directory as a guide). By convention, it lives in a file
+called "spam.c" or "spammodule.c". The output file should be called
+"spam.dll" or "spam.pyd" (the latter is supported to avoid confusion with a
+system library "spam.dll" to which your module could be a Python interface)
+in Release mode, or spam_d.dll or spam_d.pyd in Debug mode.
+
+Now your options are:
+
+1) Copy example.sln and example.vcproj, rename them to spam.*, and edit them
+by hand.
+
+or
+
+2) Create a brand new project; instructions are below.
+
+In either case, copy example_nt\example.def to spam\spam.def, and edit the
+new spam.def so its second line contains the string "initspam". If you
+created a new project yourself, add the file spam.def to the project now.
+(This is an annoying little file with only two lines. An alternative
+approach is to forget about the .def file, and add the option
+"/export:initspam" somewhere to the Link settings, by manually editing the
+"Project -> Properties -> Linker -> Command Line -> Additional Options"
+box).
+
+You are now all set to build your extension, unless it requires other
+external libraries, include files, etc. See Python's Extending and
+Embedding manual for instructions on how to write an extension.
+
+
+CREATING A BRAND NEW PROJECT
+----------------------------
+Use the
+ File -> New -> Project...
+dialog to create a new Project Workspace. Select "Visual C++ Projects/Win32/
+Win32 Project", enter the name ("spam"), and make sure the "Location" is
+set to parent of the spam directory you have created (which should be a direct
+subdirectory of the Python build tree, a sibling of Include and PC).
+In "Application Settings", select "DLL", and "Empty Project". Click OK.
+
+You should now create the file spam.def as instructed in the previous
+section. Add the source files (including the .def file) to the project,
+using "Project", "Add Existing Item".
+
+Now open the
+ Project -> spam properties...
+dialog. (Impressive, isn't it? :-) You only need to change a few
+settings. Make sure "All Configurations" is selected from the "Settings
+for:" dropdown list. Select the "C/C++" tab. Choose the "General"
+category in the popup menu at the top. Type the following text in the
+entry box labeled "Addditional Include Directories:"
+
+ ..\Include,..\PC
+
+Then, choose the "General" category in the "Linker" tab, and enter
+ ..\PCbuild
+in the "Additional library Directories" box.
+
+Now you need to add some mode-specific settings (select "Accept"
+when asked to confirm your changes):
+
+Select "Release" in the "Configuration" dropdown list. Click the
+"Link" tab, choose the "Input" Category, and append "python24.lib" to the
+list in the "Additional Dependencies" box.
+
+Select "Debug" in the "Settings for:" dropdown list, and append
+"python24_d.lib" to the list in the Additional Dependencies" box. Then
+click on the C/C++ tab, select "Code Generation", and select
+"Multi-threaded Debug DLL" from the "Runtime library" dropdown list.
+
+Select "Release" again from the "Settings for:" dropdown list.
+Select "Multi-threaded DLL" from the "Use run-time library:" dropdown list.
+
+That's all <wink>.