blob: b8532abca8e29da4b61f4d10a730a2ab1c98c784 [file] [log] [blame]
Barry Warsawc7736b91997-09-04 13:05:14 +00001# -*- makefile -*-
Guido van Rossumb6775db1994-08-01 11:34:53 +00002# The file Setup is used by the makesetup script to construct the files
3# Makefile and config.c, from Makefile.pre and config.c.in,
4# respectively. The file Setup itself is initially copied from
Fred Drakecf3bc8c2000-10-26 17:07:40 +00005# Setup.dist; once it exists it will not be overwritten, so you can edit
Guido van Rossumf4449de1995-04-10 11:37:18 +00006# Setup to your heart's content. Note that Makefile.pre is created
7# from Makefile.pre.in by the toplevel configure script.
Guido van Rossumb6775db1994-08-01 11:34:53 +00008
9# (VPATH notes: Setup and Makefile.pre are in the build directory, as
Fred Drakecf3bc8c2000-10-26 17:07:40 +000010# are Makefile and config.c; the *.in and *.dist files are in the source
Guido van Rossumb6775db1994-08-01 11:34:53 +000011# directory.)
12
Guido van Rossumfba715a1994-01-02 00:26:09 +000013# Each line in this file describes one or more optional modules.
Andrew M. Kuchlingab354bb2001-02-27 03:29:52 +000014# Modules enabled here will not be compiled by the setup.py script,
15# so the file can be used to override setup.py's behavior.
16
Guido van Rossumfba715a1994-01-02 00:26:09 +000017# Lines have the following structure:
18#
Guido van Rossumf6971e21994-08-30 12:25:20 +000019# <module> ... [<sourcefile> ...] [<cpparg> ...] [<library> ...]
Guido van Rossumfba715a1994-01-02 00:26:09 +000020#
Guido van Rossumf6971e21994-08-30 12:25:20 +000021# <sourcefile> is anything ending in .c (.C, .cc, .c++ are C++ files)
Guido van Rossumfba715a1994-01-02 00:26:09 +000022# <cpparg> is anything starting with -I, -D, -U or -C
23# <library> is anything ending in .a or beginning with -l or -L
24# <module> is anything else but should be a valid Python
25# identifier (letters, digits, underscores, beginning with non-digit)
26#
Guido van Rossum613b9431996-08-20 19:50:17 +000027# (As the makesetup script changes, it may recognize some other
28# arguments as well, e.g. *.so and *.sl as libraries. See the big
29# case statement in the makesetup script.)
30#
Guido van Rossumfba715a1994-01-02 00:26:09 +000031# Lines can also have the form
32#
33# <name> = <value>
34#
35# which defines a Make variable definition inserted into Makefile.in
Guido van Rossum7cc5abd1994-09-12 10:42:20 +000036#
Guido van Rossum30e817e1997-12-02 16:46:39 +000037# Finally, if a line contains just the word "*shared*" (without the
38# quotes but with the stars), then the following modules will not be
Martin v. Löwisbbeb1e62002-04-19 09:47:23 +000039# built statically. The build process works like this:
40#
41# 1. Build all modules that are declared as static in Modules/Setup,
42# combine them into libpythonxy.a, combine that into python.
43# 2. Build all modules that are listed as shared in Modules/Setup.
44# 3. Invoke setup.py. That builds all modules that
45# a) are not builtin, and
46# b) are not listed in Modules/Setup, and
47# c) can be build on the target
48#
49# Therefore, modules declared to be shared will not be
Guido van Rossum30e817e1997-12-02 16:46:39 +000050# included in the config.c file, nor in the list of objects to be
51# added to the library archive, and their linker options won't be
Martin v. Löwisbbeb1e62002-04-19 09:47:23 +000052# added to the linker options. Rules to create their .o files and
Guido van Rossum30e817e1997-12-02 16:46:39 +000053# their shared libraries will still be added to the Makefile, and
54# their names will be collected in the Make variable SHAREDMODS. This
Guido van Rossum7fef86e1998-10-07 14:41:54 +000055# is used to build modules as shared libraries. (They can be
56# installed using "make sharedinstall", which is implied by the
57# toplevel "make install" target.) (For compatibility,
Guido van Rossum30e817e1997-12-02 16:46:39 +000058# *noconfig* has the same effect as *shared*.)
Guido van Rossumb71c5701999-02-22 18:11:18 +000059#
Martin v. Löwisbbeb1e62002-04-19 09:47:23 +000060# In addition, *static* explicitly declares the following modules to
61# be static. Lines containing "*static*" and "*shared*" may thus
62# alternate thoughout this file.
Guido van Rossumb6775db1994-08-01 11:34:53 +000063
Guido van Rossumfba715a1994-01-02 00:26:09 +000064# NOTE: As a standard policy, as many modules as can be supported by a
65# platform should be present. The distribution comes with all modules
66# enabled that are supported by most platforms and don't require you
Guido van Rossumf4449de1995-04-10 11:37:18 +000067# to ftp sources from elsewhere.
Guido van Rossumfba715a1994-01-02 00:26:09 +000068
69
Guido van Rossumb6775db1994-08-01 11:34:53 +000070# Some special rules to define PYTHONPATH.
71# Edit the definitions below to indicate which options you are using.
72# Don't add any whitespace or comments!
73
Guido van Rossum0c5e3c81996-07-31 17:49:01 +000074# Directories where library files get installed.
75# DESTLIB is for Python modules; MACHDESTLIB for shared libraries.
76DESTLIB=$(LIBDEST)
77MACHDESTLIB=$(BINLIBDEST)
Guido van Rossumb6775db1994-08-01 11:34:53 +000078
Guido van Rossum97227811997-04-11 17:19:54 +000079# NOTE: all the paths are now relative to the prefix that is computed
80# at run time!
81
Guido van Rossum0c5e3c81996-07-31 17:49:01 +000082# Standard path -- don't edit.
Guido van Rossum97227811997-04-11 17:19:54 +000083# No leading colon since this is the first entry.
84# Empty since this is now just the runtime prefix.
85DESTPATH=
Guido van Rossum1c206481995-09-13 18:39:04 +000086
Guido van Rossum0c5e3c81996-07-31 17:49:01 +000087# Site specific path components -- should begin with : if non-empty
88SITEPATH=
89
90# Standard path components for test modules
Guido van Rossum7d83a5e1999-02-08 21:49:22 +000091TESTPATH=
Guido van Rossumb6775db1994-08-01 11:34:53 +000092
Guido van Rossumd3c1bd31996-07-30 16:54:03 +000093# Path components for machine- or system-dependent modules and shared libraries
Guido van Rossuma9f02b81997-09-28 05:45:40 +000094MACHDEPPATH=:plat-$(MACHDEP)
Guido van Rossumb6775db1994-08-01 11:34:53 +000095
Andrew M. Kuchling93b747e2001-01-27 01:31:35 +000096# Path component for the Tkinter-related modules
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +000097# The TKPATH variable is always enabled, to save you the effort.
Andrew M. Kuchling93b747e2001-01-27 01:31:35 +000098TKPATH=:lib-tk
99
Guido van Rossum2808b742000-05-03 22:34:12 +0000100COREPYTHONPATH=$(DESTPATH)$(SITEPATH)$(TESTPATH)$(MACHDEPPATH)$(TKPATH)
Guido van Rossumf5e0ea81994-09-12 15:35:36 +0000101PYTHONPATH=$(COREPYTHONPATH)
Guido van Rossumb6775db1994-08-01 11:34:53 +0000102
103
Guido van Rossumcaffcdf1995-03-10 15:14:13 +0000104# The modules listed here can't be built as shared libraries for
105# various reasons; therefore they are listed here instead of in the
106# normal order.
Guido van Rossum05bf2801994-10-20 22:01:38 +0000107
Andrew M. Kuchling3712d392001-01-17 18:55:13 +0000108# This only contains the minimal set of modules required to run the
109# setup.py script in the root of the Python source tree.
Guido van Rossumcaffcdf1995-03-10 15:14:13 +0000110
111posix posixmodule.c # posix (UNIX) system calls
Fred Drake5f8a23f2002-08-05 18:06:17 +0000112errno errnomodule.c # posix (UNIX) errno values
Guido van Rossume5679352000-03-31 15:01:27 +0000113_sre _sre.c # Fredrik Lundh's new regular expressions
Guido van Rossumcaffcdf1995-03-10 15:14:13 +0000114
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000115# The rest of the modules listed in this file are all commented out by
116# default. Usually they can be detected and built as dynamically
117# loaded modules by the new setup.py script added in Python 2.1. If
118# you're on a platform that doesn't support dynamic loading, want to
119# compile modules statically into the Python binary, or need to
120# specify some odd set of compiler switches, you can uncomment the
121# appropriate lines below.
122
123# ======================================================================
124
Jeremy Hyltona25d9952001-10-17 13:46:44 +0000125# The Python symtable module depends on .h files that setup.py doesn't track
126_symtable symtablemodule.c
127
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000128# The SGI specific GL module:
129
130GLHACK=-Dclear=__GLclear
131#gl glmodule.c cgensupport.c -I$(srcdir) $(GLHACK) -lgl -lX11
132
133# Pure module. Cannot be linked dynamically.
134# -DWITH_QUANTIFY, -DWITH_PURIFY, or -DWITH_ALL_PURE
135#WHICH_PURE_PRODUCTS=-DWITH_ALL_PURE
136#PURE_INCLS=-I/usr/local/include
137#PURE_STUBLIBS=-L/usr/local/lib -lpurify_stubs -lquantify_stubs
138#pure puremodule.c $(WHICH_PURE_PRODUCTS) $(PURE_INCLS) $(PURE_STUBLIBS)
139
140# Uncommenting the following line tells makesetup that all following
141# modules are to be built as shared libraries (see above for more
142# detail; also note that *static* reverses this effect):
143
144#*shared*
145
146# GNU readline. Unlike previous Python incarnations, GNU readline is
147# now incorporated in an optional module, configured in the Setup file
148# instead of by a configure script switch. You may have to insert a
149# -L option pointing to the directory where libreadline.* lives,
150# and you may have to change -ltermcap to -ltermlib or perhaps remove
151# it, depending on your system -- see the GNU readline instructions.
152# It's okay for this to be a shared library, too.
153
154#readline readline.c -lreadline -ltermcap
155
156
157# Modules that should always be present (non UNIX dependent):
158
159#array arraymodule.c # array objects
160#cmath cmathmodule.c # -lm # complex math library functions
161#math mathmodule.c # -lm # math library functions, e.g. sin()
162#struct structmodule.c # binary structure packing/unpacking
163#time timemodule.c # -lm # time operations and variables
164#operator operator.c # operator.add() and similar goodies
Fred Drake2de74712001-02-01 05:26:54 +0000165#_weakref _weakref.c # basic weak reference support
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000166#_codecs _codecsmodule.c # access to the builtin codecs and codec registry
Tim Petersf36fb692001-02-04 09:18:21 +0000167#_testcapi _testcapimodule.c # Python C API test module
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000168
Martin v. Löwis76192ee2001-02-06 09:34:40 +0000169#unicodedata unicodedata.c # static Unicode character database
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000170
171#_locale _localemodule.c # access to ISO C locale support
172
173
174# Modules with some UNIX dependencies -- on by default:
175# (If you have a really backward UNIX, select and socket may not be
176# supported...)
177
178#fcntl fcntlmodule.c # fcntl(2) and ioctl(2)
179#pwd pwdmodule.c # pwd(3)
180#grp grpmodule.c # grp(3)
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000181#select selectmodule.c # select(2); not on ancient System V
182
183# Memory-mapped files (also works on Win32).
184#mmap mmapmodule.c
185
186# Dynamic readlines
187#xreadlines xreadlinesmodule.c
188
Marc-André Lemburga5d2b4c2002-02-16 18:23:30 +0000189# Socket module helper for socket(2)
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000190#_socket socketmodule.c
191
Marc-André Lemburga5d2b4c2002-02-16 18:23:30 +0000192# Socket module helper for SSL support; you must comment out the other
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000193# socket line above, and possibly edit the SSL variable:
194#SSL=/usr/local/ssl
Marc-André Lemburga5d2b4c2002-02-16 18:23:30 +0000195#_ssl _ssl.c \
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000196# -DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \
197# -L$(SSL)/lib -lssl -lcrypto
198
199# The crypt module is now disabled by default because it breaks builds
200# on many systems (where -lcrypt is needed), e.g. Linux (I believe).
201#
202# First, look at Setup.config; configure may have set this for you.
203
204#crypt cryptmodule.c # -lcrypt # crypt(3); needs -lcrypt on some systems
205
206
207# Some more UNIX dependent modules -- off by default, since these
208# are not supported by all UNIX systems:
209
210#nis nismodule.c -lnsl # Sun yellow pages -- not everywhere
211#termios termios.c # Steen Lumholt's termios module
212#resource resource.c # Jeremy Hylton's rlimit interface
213
214
215# Multimedia modules -- off by default.
216# These don't work for 64-bit platforms!!!
217# These represent audio samples or images as strings:
218
219#audioop audioop.c # Operations on audio samples
220#imageop imageop.c # Operations on images
221#rgbimg rgbimgmodule.c # Read SGI RGB image files (but coded portably)
222
223
224# The md5 module implements the RSA Data Security, Inc. MD5
225# Message-Digest Algorithm, described in RFC 1321. The necessary files
226# md5c.c and md5.h are included here.
227
228#md5 md5module.c md5c.c
229
230
231# The sha module implements the SHA checksum algorithm.
232# (NIST's Secure Hash Algorithm.)
233#sha shamodule.c
234
235
236# The mpz module interfaces to the GNU Multiple Precision library.
237# You need to ftp the GNU MP library.
238# The GMP variable must point to the GMP source directory.
239# This was originally written and tested against GMP 1.2 and 1.3.2.
240# It has been modified by Rob Hooft to work with 2.0.2 as well, but I
241# haven't tested it recently.
242
243# A compatible MP library unencombered by the GPL also exists. It was
244# posted to comp.sources.misc in volume 40 and is widely available from
245# FTP archive sites. One URL for it is:
246# ftp://gatekeeper.dec.com/.b/usenet/comp.sources.misc/volume40/fgmp/part01.Z
247
248#GMP=/ufs/guido/src/gmp
249#mpz mpzmodule.c -I$(GMP) $(GMP)/libgmp.a
250
251
252# SGI IRIX specific modules -- off by default.
253
254# These module work on any SGI machine:
255
256# *** gl must be enabled higher up in this file ***
257#fm fmmodule.c $(GLHACK) -lfm -lgl # Font Manager
258#sgi sgimodule.c # sgi.nap() and a few more
259
260# This module requires the header file
261# /usr/people/4Dgifts/iristools/include/izoom.h:
262#imgfile imgfile.c -limage -lgutil -lgl -lm # Image Processing Utilities
263
264
265# These modules require the Multimedia Development Option (I think):
266
267#al almodule.c -laudio # Audio Library
268#cd cdmodule.c -lcdaudio -lds -lmediad # CD Audio Library
269#cl clmodule.c -lcl -lawareaudio # Compression Library
270#sv svmodule.c yuvconvert.c -lsvideo -lXext -lX11 # Starter Video
271
272
273# The FORMS library, by Mark Overmars, implements user interface
274# components such as dialogs and buttons using SGI's GL and FM
275# libraries. You must ftp the FORMS library separately from
276# ftp://ftp.cs.ruu.nl/pub/SGI/FORMS. It was tested with FORMS 2.2a.
277# NOTE: if you want to be able to use FORMS and curses simultaneously
278# (or both link them statically into the same binary), you must
279# compile all of FORMS with the cc option "-Dclear=__GLclear".
280
281# The FORMS variable must point to the FORMS subdirectory of the forms
282# toplevel directory:
283
284#FORMS=/ufs/guido/src/forms/FORMS
285#fl flmodule.c -I$(FORMS) $(GLHACK) $(FORMS)/libforms.a -lfm -lgl
286
287
288# SunOS specific modules -- off by default:
289
290#sunaudiodev sunaudiodev.c
291
292
Andrew M. Kuchlingab354bb2001-02-27 03:29:52 +0000293# A Linux specific module -- off by default; this may also work on
294# some *BSDs.
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000295
296#linuxaudiodev linuxaudiodev.c
297
298
299# George Neville-Neil's timing module:
300
301#timing timingmodule.c
302
303
304# The _tkinter module.
305#
306# The command for _tkinter is long and site specific. Please
307# uncomment and/or edit those parts as indicated. If you don't have a
308# specific extension (e.g. Tix or BLT), leave the corresponding line
309# commented out. (Leave the trailing backslashes in! If you
310# experience strange errors, you may want to join all uncommented
311# lines and remove the backslashes -- the backslash interpretation is
312# done by the shell's "read" command and it may not be implemented on
313# every system.
314
315# *** Always uncomment this (leave the leading underscore in!):
316# _tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \
Guido van Rossum86525222001-03-22 22:18:55 +0000317# *** Uncomment and edit to reflect where your Tcl/Tk libraries are:
318# -L/usr/local/lib \
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000319# *** Uncomment and edit to reflect where your Tcl/Tk headers are:
320# -I/usr/local/include \
321# *** Uncomment and edit to reflect where your X11 header files are:
322# -I/usr/X11R6/include \
323# *** Or uncomment this for Solaris:
324# -I/usr/openwin/include \
325# *** Uncomment and edit for Tix extension only:
Guido van Rossum86525222001-03-22 22:18:55 +0000326# -DWITH_TIX -ltix8.1.8.2 \
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000327# *** Uncomment and edit for BLT extension only:
328# -DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \
329# *** Uncomment and edit for PIL (TkImaging) extension only:
330# (See http://www.pythonware.com/products/pil/ for more info)
331# -DWITH_PIL -I../Extensions/Imaging/libImaging tkImaging.c \
332# *** Uncomment and edit for TOGL extension only:
333# -DWITH_TOGL togl.c \
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000334# *** Uncomment and edit to reflect your Tcl/Tk versions:
Guido van Rossum86525222001-03-22 22:18:55 +0000335# -ltk8.2 -ltcl8.2 \
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000336# *** Uncomment and edit to reflect where your X11 libraries are:
337# -L/usr/X11R6/lib \
338# *** Or uncomment this for Solaris:
339# -L/usr/openwin/lib \
340# *** Uncomment these for TOGL extension only:
341# -lGL -lGLU -lXext -lXmu \
342# *** Uncomment for AIX:
343# -lld \
344# *** Always uncomment this; X11 libraries to link with:
345# -lX11
346
347# Lance Ellinghaus's modules:
348
349#rotor rotormodule.c # enigma-inspired encryption
350#syslog syslogmodule.c # syslog daemon interface
351
352
353# Curses support, requring the System V version of curses, often
354# provided by the ncurses library. e.g. on Linux, link with -lncurses
355# instead of -lcurses; on SunOS 4.1.3, insert -I/usr/5include
356# -L/usr/5lib before -lcurses).
357#
358# First, look at Setup.config; configure may have set this for you.
359
360#_curses _cursesmodule.c -lcurses -ltermcap
361# Wrapper for the panel library that's part of ncurses and SYSV curses.
362#_curses_panel _curses_panel.c -lpanel -lncurses
363
364
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000365# Generic (SunOS / SVR4) dynamic loading module.
366# This is not needed for dynamic loading of Python modules --
367# it is a highly experimental and dangerous device for calling
368# *arbitrary* C functions in *arbitrary* shared libraries:
369
370#dl dlmodule.c
371
372
373# Modules that provide persistent dictionary-like semantics. You will
374# probably want to arrange for at least one of them to be available on
375# your machine, though none are defined by default because of library
376# dependencies. The Python module anydbm.py provides an
377# implementation independent wrapper for these; dumbdbm.py provides
378# similar functionality (but slower of course) implemented in Python.
379
380# The standard Unix dbm module has been moved to Setup.config so that
381# it will be compiled as a shared library by default. Compiling it as
382# a built-in module causes conflicts with the pybsddb3 module since it
383# creates a static dependency on an out-of-date version of db.so.
384#
385# First, look at Setup.config; configure may have set this for you.
386
387#dbm dbmmodule.c # dbm(3) may require -lndbm or similar
388
389# Anthony Baxter's gdbm module. GNU dbm(3) will require -lgdbm:
390#
391# First, look at Setup.config; configure may have set this for you.
392
393#gdbm gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm
394
395
396# Berkeley DB interface.
397#
398# This requires the Berkeley DB code, see
399# ftp://ftp.cs.berkeley.edu/pub/4bsd/db.1.85.tar.gz
400#
401# Edit the variables DB and DBPORT to point to the db top directory
402# and the subdirectory of PORT where you built it.
403#
404# (See http://electricrain.com/greg/python/bsddb3/ for an interface to
405# BSD DB 3.x.)
406
407# Note: If a db.h file is found by configure, bsddb will be enabled
408# automatically via Setup.config.in. It only needs to be enabled here
409# if it is not automatically enabled there; check the generated
410# Setup.config before enabling it here.
411
412#DB=/depot/sundry/src/berkeley-db/db.1.85
413#DBPORT=$(DB)/PORT/irix.5.3
414#bsddb bsddbmodule.c -I$(DBPORT)/include -I$(DBPORT) $(DBPORT)/libdb.a
415
416
417
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000418# Helper module for various ascii-encoders
419#binascii binascii.c
420
421# Fred Drake's interface to the Python parser
422#parser parsermodule.c
423
Guido van Rossum2e1c09c2002-04-04 17:52:50 +0000424# cStringIO and cPickle
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000425#cStringIO cStringIO.c
426#cPickle cPickle.c
427
428
429# Lee Busby's SIGFPE modules.
430# The library to link fpectl with is platform specific.
431# Choose *one* of the options below for fpectl:
432
433# For SGI IRIX (tested on 5.3):
434#fpectl fpectlmodule.c -lfpe
435
436# For Solaris with SunPro compiler (tested on Solaris 2.5 with SunPro C 4.2):
437# (Without the compiler you don't have -lsunmath.)
438#fpectl fpectlmodule.c -R/opt/SUNWspro/lib -lsunmath -lm
439
440# For other systems: see instructions in fpectlmodule.c.
441#fpectl fpectlmodule.c ...
442
443# Test module for fpectl. No extra libraries needed.
444#fpetest fpetestmodule.c
445
446# Andrew Kuchling's zlib module.
447# This require zlib 1.1.3 (or later).
448# See http://www.cdrom.com/pub/infozip/zlib/
449#zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz
450
451# Interface to the Expat XML parser
452#
Fred Drake9d416a72002-08-09 02:39:13 +0000453# Expat was written by James Clark and is now maintained by a group of
454# developers on SourceForge; see www.libexpat.org for more
455# information. The pyexpat module was written by Paul Prescod after a
456# prototype by Jack Jansen. Source of Expat 1.95.2 is included in
457# Modules/expat/. Usage of a system shared libexpat.so/expat.dll is
458# not advised.
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000459#
Fred Drake9d416a72002-08-09 02:39:13 +0000460# More information on Expat can be found at www.libexpat.org.
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000461#
Fred Drake9d416a72002-08-09 02:39:13 +0000462#EXPAT_DIR=/usr/local/src/expat-1.95.2
463#pyexpat pyexpat.c -DHAVE_EXPAT_H -I$(EXPAT_DIR)/lib -L$(EXPAT_DIR) -lexpat
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000464
465
466# Example -- included for reference only:
467# xx xxmodule.c
468
Tim Peters6d6c1a32001-08-02 04:15:00 +0000469# Another example -- the 'xxsubtype' module shows C-level subtyping in action
470xxsubtype xxsubtype.c