blob: 647f2fa89269b69dda3db273d5e5e5d0522fbaa7 [file] [log] [blame]
Barry Warsawc7736b91997-09-04 13:05:14 +00001# -*- makefile -*-
Guido van Rossumb6775db1994-08-01 11:34:53 +00002# The file Setup is used by the makesetup script to construct the files
3# Makefile and config.c, from Makefile.pre and config.c.in,
4# respectively. The file Setup itself is initially copied from
Fred Drakecf3bc8c2000-10-26 17:07:40 +00005# Setup.dist; once it exists it will not be overwritten, so you can edit
Guido van Rossumf4449de1995-04-10 11:37:18 +00006# Setup to your heart's content. Note that Makefile.pre is created
7# from Makefile.pre.in by the toplevel configure script.
Guido van Rossumb6775db1994-08-01 11:34:53 +00008
9# (VPATH notes: Setup and Makefile.pre are in the build directory, as
Fred Drakecf3bc8c2000-10-26 17:07:40 +000010# are Makefile and config.c; the *.in and *.dist files are in the source
Guido van Rossumb6775db1994-08-01 11:34:53 +000011# directory.)
12
Guido van Rossumfba715a1994-01-02 00:26:09 +000013# Each line in this file describes one or more optional modules.
Andrew M. Kuchlingab354bb2001-02-27 03:29:52 +000014# Modules enabled here will not be compiled by the setup.py script,
15# so the file can be used to override setup.py's behavior.
16
Guido van Rossumfba715a1994-01-02 00:26:09 +000017# Lines have the following structure:
18#
Guido van Rossumf6971e21994-08-30 12:25:20 +000019# <module> ... [<sourcefile> ...] [<cpparg> ...] [<library> ...]
Guido van Rossumfba715a1994-01-02 00:26:09 +000020#
Guido van Rossumf6971e21994-08-30 12:25:20 +000021# <sourcefile> is anything ending in .c (.C, .cc, .c++ are C++ files)
Guido van Rossumfba715a1994-01-02 00:26:09 +000022# <cpparg> is anything starting with -I, -D, -U or -C
23# <library> is anything ending in .a or beginning with -l or -L
24# <module> is anything else but should be a valid Python
25# identifier (letters, digits, underscores, beginning with non-digit)
26#
Guido van Rossum613b9431996-08-20 19:50:17 +000027# (As the makesetup script changes, it may recognize some other
28# arguments as well, e.g. *.so and *.sl as libraries. See the big
29# case statement in the makesetup script.)
30#
Guido van Rossumfba715a1994-01-02 00:26:09 +000031# Lines can also have the form
32#
33# <name> = <value>
34#
35# which defines a Make variable definition inserted into Makefile.in
Guido van Rossum7cc5abd1994-09-12 10:42:20 +000036#
Guido van Rossum30e817e1997-12-02 16:46:39 +000037# Finally, if a line contains just the word "*shared*" (without the
38# quotes but with the stars), then the following modules will not be
Martin v. Löwisbbeb1e62002-04-19 09:47:23 +000039# built statically. The build process works like this:
40#
41# 1. Build all modules that are declared as static in Modules/Setup,
42# combine them into libpythonxy.a, combine that into python.
43# 2. Build all modules that are listed as shared in Modules/Setup.
44# 3. Invoke setup.py. That builds all modules that
45# a) are not builtin, and
46# b) are not listed in Modules/Setup, and
47# c) can be build on the target
48#
49# Therefore, modules declared to be shared will not be
Guido van Rossum30e817e1997-12-02 16:46:39 +000050# included in the config.c file, nor in the list of objects to be
51# added to the library archive, and their linker options won't be
Martin v. Löwisbbeb1e62002-04-19 09:47:23 +000052# added to the linker options. Rules to create their .o files and
Guido van Rossum30e817e1997-12-02 16:46:39 +000053# their shared libraries will still be added to the Makefile, and
54# their names will be collected in the Make variable SHAREDMODS. This
Guido van Rossum7fef86e1998-10-07 14:41:54 +000055# is used to build modules as shared libraries. (They can be
56# installed using "make sharedinstall", which is implied by the
57# toplevel "make install" target.) (For compatibility,
Guido van Rossum30e817e1997-12-02 16:46:39 +000058# *noconfig* has the same effect as *shared*.)
Guido van Rossumb71c5701999-02-22 18:11:18 +000059#
Martin v. Löwisbbeb1e62002-04-19 09:47:23 +000060# In addition, *static* explicitly declares the following modules to
61# be static. Lines containing "*static*" and "*shared*" may thus
62# alternate thoughout this file.
Guido van Rossumb6775db1994-08-01 11:34:53 +000063
Guido van Rossumfba715a1994-01-02 00:26:09 +000064# NOTE: As a standard policy, as many modules as can be supported by a
65# platform should be present. The distribution comes with all modules
66# enabled that are supported by most platforms and don't require you
Guido van Rossumf4449de1995-04-10 11:37:18 +000067# to ftp sources from elsewhere.
Guido van Rossumfba715a1994-01-02 00:26:09 +000068
69
Guido van Rossumb6775db1994-08-01 11:34:53 +000070# Some special rules to define PYTHONPATH.
71# Edit the definitions below to indicate which options you are using.
72# Don't add any whitespace or comments!
73
Guido van Rossum0c5e3c81996-07-31 17:49:01 +000074# Directories where library files get installed.
75# DESTLIB is for Python modules; MACHDESTLIB for shared libraries.
76DESTLIB=$(LIBDEST)
77MACHDESTLIB=$(BINLIBDEST)
Guido van Rossumb6775db1994-08-01 11:34:53 +000078
Guido van Rossum97227811997-04-11 17:19:54 +000079# NOTE: all the paths are now relative to the prefix that is computed
80# at run time!
81
Guido van Rossum0c5e3c81996-07-31 17:49:01 +000082# Standard path -- don't edit.
Guido van Rossum97227811997-04-11 17:19:54 +000083# No leading colon since this is the first entry.
84# Empty since this is now just the runtime prefix.
85DESTPATH=
Guido van Rossum1c206481995-09-13 18:39:04 +000086
Guido van Rossum0c5e3c81996-07-31 17:49:01 +000087# Site specific path components -- should begin with : if non-empty
88SITEPATH=
89
90# Standard path components for test modules
Guido van Rossum7d83a5e1999-02-08 21:49:22 +000091TESTPATH=
Guido van Rossumb6775db1994-08-01 11:34:53 +000092
Guido van Rossumd3c1bd31996-07-30 16:54:03 +000093# Path components for machine- or system-dependent modules and shared libraries
Guido van Rossuma9f02b81997-09-28 05:45:40 +000094MACHDEPPATH=:plat-$(MACHDEP)
Jack Jansen7b59b422003-03-17 15:44:10 +000095EXTRAMACHDEPPATH=
Guido van Rossumb6775db1994-08-01 11:34:53 +000096
Andrew M. Kuchling93b747e2001-01-27 01:31:35 +000097# Path component for the Tkinter-related modules
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +000098# The TKPATH variable is always enabled, to save you the effort.
Andrew M. Kuchling93b747e2001-01-27 01:31:35 +000099TKPATH=:lib-tk
100
Jack Jansen7b59b422003-03-17 15:44:10 +0000101COREPYTHONPATH=$(DESTPATH)$(SITEPATH)$(TESTPATH)$(MACHDEPPATH)$(EXTRAMACHDEPPATH)$(TKPATH)
Guido van Rossumf5e0ea81994-09-12 15:35:36 +0000102PYTHONPATH=$(COREPYTHONPATH)
Guido van Rossumb6775db1994-08-01 11:34:53 +0000103
104
Guido van Rossumcaffcdf1995-03-10 15:14:13 +0000105# The modules listed here can't be built as shared libraries for
106# various reasons; therefore they are listed here instead of in the
107# normal order.
Guido van Rossum05bf2801994-10-20 22:01:38 +0000108
Andrew M. Kuchling3712d392001-01-17 18:55:13 +0000109# This only contains the minimal set of modules required to run the
110# setup.py script in the root of the Python source tree.
Guido van Rossumcaffcdf1995-03-10 15:14:13 +0000111
112posix posixmodule.c # posix (UNIX) system calls
Fred Drake5f8a23f2002-08-05 18:06:17 +0000113errno errnomodule.c # posix (UNIX) errno values
Guido van Rossume5679352000-03-31 15:01:27 +0000114_sre _sre.c # Fredrik Lundh's new regular expressions
Marc-André Lemburgb28de0d2002-12-12 17:37:50 +0000115_codecs _codecsmodule.c # access to the builtin codecs and codec registry
Guido van Rossumcaffcdf1995-03-10 15:14:13 +0000116
Just van Rossum52e14d62002-12-30 22:08:05 +0000117# The zipimport module is always imported at startup. Having it as a
118# builtin module avoids some bootstrapping problems and reduces overhead.
119zipimport zipimport.c
120
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000121# The rest of the modules listed in this file are all commented out by
122# default. Usually they can be detected and built as dynamically
123# loaded modules by the new setup.py script added in Python 2.1. If
124# you're on a platform that doesn't support dynamic loading, want to
125# compile modules statically into the Python binary, or need to
126# specify some odd set of compiler switches, you can uncomment the
127# appropriate lines below.
128
129# ======================================================================
130
Jeremy Hyltona25d9952001-10-17 13:46:44 +0000131# The Python symtable module depends on .h files that setup.py doesn't track
132_symtable symtablemodule.c
133
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000134# The SGI specific GL module:
135
136GLHACK=-Dclear=__GLclear
137#gl glmodule.c cgensupport.c -I$(srcdir) $(GLHACK) -lgl -lX11
138
139# Pure module. Cannot be linked dynamically.
140# -DWITH_QUANTIFY, -DWITH_PURIFY, or -DWITH_ALL_PURE
141#WHICH_PURE_PRODUCTS=-DWITH_ALL_PURE
142#PURE_INCLS=-I/usr/local/include
143#PURE_STUBLIBS=-L/usr/local/lib -lpurify_stubs -lquantify_stubs
144#pure puremodule.c $(WHICH_PURE_PRODUCTS) $(PURE_INCLS) $(PURE_STUBLIBS)
145
146# Uncommenting the following line tells makesetup that all following
147# modules are to be built as shared libraries (see above for more
148# detail; also note that *static* reverses this effect):
149
150#*shared*
151
152# GNU readline. Unlike previous Python incarnations, GNU readline is
153# now incorporated in an optional module, configured in the Setup file
154# instead of by a configure script switch. You may have to insert a
155# -L option pointing to the directory where libreadline.* lives,
156# and you may have to change -ltermcap to -ltermlib or perhaps remove
157# it, depending on your system -- see the GNU readline instructions.
158# It's okay for this to be a shared library, too.
159
160#readline readline.c -lreadline -ltermcap
161
162
163# Modules that should always be present (non UNIX dependent):
164
165#array arraymodule.c # array objects
166#cmath cmathmodule.c # -lm # complex math library functions
167#math mathmodule.c # -lm # math library functions, e.g. sin()
168#struct structmodule.c # binary structure packing/unpacking
169#time timemodule.c # -lm # time operations and variables
170#operator operator.c # operator.add() and similar goodies
Fred Drake2de74712001-02-01 05:26:54 +0000171#_weakref _weakref.c # basic weak reference support
Tim Petersf36fb692001-02-04 09:18:21 +0000172#_testcapi _testcapimodule.c # Python C API test module
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000173
Martin v. Löwis76192ee2001-02-06 09:34:40 +0000174#unicodedata unicodedata.c # static Unicode character database
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000175
Martin v. Löwis19d17342003-06-14 21:03:05 +0000176# access to ISO C locale support
177#_locale _localemodule.c # -lintl
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000178
179
180# Modules with some UNIX dependencies -- on by default:
181# (If you have a really backward UNIX, select and socket may not be
182# supported...)
183
184#fcntl fcntlmodule.c # fcntl(2) and ioctl(2)
185#pwd pwdmodule.c # pwd(3)
Martin v. Löwisc3001752005-01-23 09:27:24 +0000186#spwd spwdmodule.c # spwd(3)
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000187#grp grpmodule.c # grp(3)
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000188#select selectmodule.c # select(2); not on ancient System V
189
190# Memory-mapped files (also works on Win32).
191#mmap mmapmodule.c
192
Skip Montanaro24979822003-03-20 23:37:24 +0000193# CSV file helper
194#_csv _csv.c
195
Marc-André Lemburga5d2b4c2002-02-16 18:23:30 +0000196# Socket module helper for socket(2)
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000197#_socket socketmodule.c
198
Marc-André Lemburga5d2b4c2002-02-16 18:23:30 +0000199# Socket module helper for SSL support; you must comment out the other
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000200# socket line above, and possibly edit the SSL variable:
201#SSL=/usr/local/ssl
Marc-André Lemburga5d2b4c2002-02-16 18:23:30 +0000202#_ssl _ssl.c \
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000203# -DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \
204# -L$(SSL)/lib -lssl -lcrypto
205
206# The crypt module is now disabled by default because it breaks builds
207# on many systems (where -lcrypt is needed), e.g. Linux (I believe).
208#
209# First, look at Setup.config; configure may have set this for you.
210
211#crypt cryptmodule.c # -lcrypt # crypt(3); needs -lcrypt on some systems
212
213
214# Some more UNIX dependent modules -- off by default, since these
215# are not supported by all UNIX systems:
216
217#nis nismodule.c -lnsl # Sun yellow pages -- not everywhere
218#termios termios.c # Steen Lumholt's termios module
219#resource resource.c # Jeremy Hylton's rlimit interface
220
221
222# Multimedia modules -- off by default.
223# These don't work for 64-bit platforms!!!
Martin v. Löwis8fbefe22004-07-19 16:42:20 +0000224# #993173 says audioop works on 64-bit platforms, though.
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000225# These represent audio samples or images as strings:
226
227#audioop audioop.c # Operations on audio samples
228#imageop imageop.c # Operations on images
229#rgbimg rgbimgmodule.c # Read SGI RGB image files (but coded portably)
230
231
232# The md5 module implements the RSA Data Security, Inc. MD5
233# Message-Digest Algorithm, described in RFC 1321. The necessary files
234# md5c.c and md5.h are included here.
235
236#md5 md5module.c md5c.c
237
238
239# The sha module implements the SHA checksum algorithm.
240# (NIST's Secure Hash Algorithm.)
241#sha shamodule.c
242
243
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000244# SGI IRIX specific modules -- off by default.
245
246# These module work on any SGI machine:
247
248# *** gl must be enabled higher up in this file ***
249#fm fmmodule.c $(GLHACK) -lfm -lgl # Font Manager
250#sgi sgimodule.c # sgi.nap() and a few more
251
252# This module requires the header file
253# /usr/people/4Dgifts/iristools/include/izoom.h:
254#imgfile imgfile.c -limage -lgutil -lgl -lm # Image Processing Utilities
255
256
257# These modules require the Multimedia Development Option (I think):
258
259#al almodule.c -laudio # Audio Library
260#cd cdmodule.c -lcdaudio -lds -lmediad # CD Audio Library
261#cl clmodule.c -lcl -lawareaudio # Compression Library
262#sv svmodule.c yuvconvert.c -lsvideo -lXext -lX11 # Starter Video
263
264
265# The FORMS library, by Mark Overmars, implements user interface
266# components such as dialogs and buttons using SGI's GL and FM
267# libraries. You must ftp the FORMS library separately from
268# ftp://ftp.cs.ruu.nl/pub/SGI/FORMS. It was tested with FORMS 2.2a.
269# NOTE: if you want to be able to use FORMS and curses simultaneously
270# (or both link them statically into the same binary), you must
271# compile all of FORMS with the cc option "-Dclear=__GLclear".
272
273# The FORMS variable must point to the FORMS subdirectory of the forms
274# toplevel directory:
275
276#FORMS=/ufs/guido/src/forms/FORMS
277#fl flmodule.c -I$(FORMS) $(GLHACK) $(FORMS)/libforms.a -lfm -lgl
278
279
280# SunOS specific modules -- off by default:
281
282#sunaudiodev sunaudiodev.c
283
284
Andrew M. Kuchlingab354bb2001-02-27 03:29:52 +0000285# A Linux specific module -- off by default; this may also work on
286# some *BSDs.
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000287
288#linuxaudiodev linuxaudiodev.c
289
290
291# George Neville-Neil's timing module:
292
293#timing timingmodule.c
294
295
296# The _tkinter module.
297#
298# The command for _tkinter is long and site specific. Please
299# uncomment and/or edit those parts as indicated. If you don't have a
300# specific extension (e.g. Tix or BLT), leave the corresponding line
301# commented out. (Leave the trailing backslashes in! If you
302# experience strange errors, you may want to join all uncommented
303# lines and remove the backslashes -- the backslash interpretation is
304# done by the shell's "read" command and it may not be implemented on
305# every system.
306
307# *** Always uncomment this (leave the leading underscore in!):
308# _tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \
Guido van Rossum86525222001-03-22 22:18:55 +0000309# *** Uncomment and edit to reflect where your Tcl/Tk libraries are:
310# -L/usr/local/lib \
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000311# *** Uncomment and edit to reflect where your Tcl/Tk headers are:
312# -I/usr/local/include \
313# *** Uncomment and edit to reflect where your X11 header files are:
314# -I/usr/X11R6/include \
315# *** Or uncomment this for Solaris:
316# -I/usr/openwin/include \
317# *** Uncomment and edit for Tix extension only:
Guido van Rossum86525222001-03-22 22:18:55 +0000318# -DWITH_TIX -ltix8.1.8.2 \
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000319# *** Uncomment and edit for BLT extension only:
320# -DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \
321# *** Uncomment and edit for PIL (TkImaging) extension only:
322# (See http://www.pythonware.com/products/pil/ for more info)
323# -DWITH_PIL -I../Extensions/Imaging/libImaging tkImaging.c \
324# *** Uncomment and edit for TOGL extension only:
325# -DWITH_TOGL togl.c \
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000326# *** Uncomment and edit to reflect your Tcl/Tk versions:
Guido van Rossum86525222001-03-22 22:18:55 +0000327# -ltk8.2 -ltcl8.2 \
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000328# *** Uncomment and edit to reflect where your X11 libraries are:
329# -L/usr/X11R6/lib \
330# *** Or uncomment this for Solaris:
331# -L/usr/openwin/lib \
332# *** Uncomment these for TOGL extension only:
333# -lGL -lGLU -lXext -lXmu \
334# *** Uncomment for AIX:
335# -lld \
336# *** Always uncomment this; X11 libraries to link with:
337# -lX11
338
Andrew M. Kuchling4e699d52004-08-31 13:50:12 +0000339# Lance Ellinghaus's syslog module
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000340#syslog syslogmodule.c # syslog daemon interface
341
342
343# Curses support, requring the System V version of curses, often
344# provided by the ncurses library. e.g. on Linux, link with -lncurses
Skip Montanaroce59c042004-01-17 14:19:44 +0000345# instead of -lcurses).
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000346#
347# First, look at Setup.config; configure may have set this for you.
348
349#_curses _cursesmodule.c -lcurses -ltermcap
350# Wrapper for the panel library that's part of ncurses and SYSV curses.
351#_curses_panel _curses_panel.c -lpanel -lncurses
352
353
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000354# Generic (SunOS / SVR4) dynamic loading module.
355# This is not needed for dynamic loading of Python modules --
356# it is a highly experimental and dangerous device for calling
357# *arbitrary* C functions in *arbitrary* shared libraries:
358
359#dl dlmodule.c
360
361
362# Modules that provide persistent dictionary-like semantics. You will
363# probably want to arrange for at least one of them to be available on
364# your machine, though none are defined by default because of library
365# dependencies. The Python module anydbm.py provides an
366# implementation independent wrapper for these; dumbdbm.py provides
367# similar functionality (but slower of course) implemented in Python.
368
369# The standard Unix dbm module has been moved to Setup.config so that
370# it will be compiled as a shared library by default. Compiling it as
371# a built-in module causes conflicts with the pybsddb3 module since it
372# creates a static dependency on an out-of-date version of db.so.
373#
374# First, look at Setup.config; configure may have set this for you.
375
376#dbm dbmmodule.c # dbm(3) may require -lndbm or similar
377
378# Anthony Baxter's gdbm module. GNU dbm(3) will require -lgdbm:
379#
380# First, look at Setup.config; configure may have set this for you.
381
382#gdbm gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm
383
384
Martin v. Löwis6aa4a1f2002-11-19 08:09:52 +0000385# Sleepycat Berkeley DB interface.
386#
387# This requires the Sleepycat DB code, see http://www.sleepycat.com/
Martin v. Löwis21645fc2002-11-19 08:30:08 +0000388# The earliest supported version of that library is 3.0, the latest
389# supported version is 4.0 (4.1 is specifically not supported, as that
390# changes the semantics of transactional databases). A list of available
391# releases can be found at
392#
393# http://www.sleepycat.com/update/index.html
Martin v. Löwis6aa4a1f2002-11-19 08:09:52 +0000394#
395# Edit the variables DB and DBLIBVERto point to the db top directory
396# and the subdirectory of PORT where you built it.
397#DB=/usr/local/BerkeleyDB.4.0
398#DBLIBVER=4.0
399#DBINC=$(DB)/include
400#DBLIB=$(DB)/lib
Gustavo Niemeyer3d5cbea2003-05-26 21:19:47 +0000401#_bsddb _bsddb.c -I$(DBINC) -L$(DBLIB) -ldb-$(DBLIBVER)
Martin v. Löwis6aa4a1f2002-11-19 08:09:52 +0000402
403# Historical Berkeley DB 1.85
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000404#
Skip Montanaro56643672002-12-02 00:27:10 +0000405# This module is deprecated; the 1.85 version of the Berkeley DB library has
406# bugs that can cause data corruption. If you can, use later versions of the
407# library instead, available from <http://www.sleepycat.com/>.
408
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000409#DB=/depot/sundry/src/berkeley-db/db.1.85
410#DBPORT=$(DB)/PORT/irix.5.3
Martin v. Löwis6aa4a1f2002-11-19 08:09:52 +0000411#bsddb185 bsddbmodule.c -I$(DBPORT)/include -I$(DBPORT) $(DBPORT)/libdb.a
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000412
413
414
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000415# Helper module for various ascii-encoders
416#binascii binascii.c
417
418# Fred Drake's interface to the Python parser
419#parser parsermodule.c
420
Guido van Rossum2e1c09c2002-04-04 17:52:50 +0000421# cStringIO and cPickle
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000422#cStringIO cStringIO.c
423#cPickle cPickle.c
424
425
426# Lee Busby's SIGFPE modules.
427# The library to link fpectl with is platform specific.
428# Choose *one* of the options below for fpectl:
429
430# For SGI IRIX (tested on 5.3):
431#fpectl fpectlmodule.c -lfpe
432
433# For Solaris with SunPro compiler (tested on Solaris 2.5 with SunPro C 4.2):
434# (Without the compiler you don't have -lsunmath.)
435#fpectl fpectlmodule.c -R/opt/SUNWspro/lib -lsunmath -lm
436
437# For other systems: see instructions in fpectlmodule.c.
438#fpectl fpectlmodule.c ...
439
440# Test module for fpectl. No extra libraries needed.
441#fpetest fpetestmodule.c
442
443# Andrew Kuchling's zlib module.
444# This require zlib 1.1.3 (or later).
Neal Norwitz014f1032004-07-29 03:55:56 +0000445# See http://www.gzip.org/zlib/
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000446#zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz
447
448# Interface to the Expat XML parser
449#
Fred Drake9d416a72002-08-09 02:39:13 +0000450# Expat was written by James Clark and is now maintained by a group of
451# developers on SourceForge; see www.libexpat.org for more
452# information. The pyexpat module was written by Paul Prescod after a
453# prototype by Jack Jansen. Source of Expat 1.95.2 is included in
454# Modules/expat/. Usage of a system shared libexpat.so/expat.dll is
455# not advised.
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000456#
Fred Drake9d416a72002-08-09 02:39:13 +0000457# More information on Expat can be found at www.libexpat.org.
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000458#
Fred Drake9d416a72002-08-09 02:39:13 +0000459#EXPAT_DIR=/usr/local/src/expat-1.95.2
460#pyexpat pyexpat.c -DHAVE_EXPAT_H -I$(EXPAT_DIR)/lib -L$(EXPAT_DIR) -lexpat
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000461
Hye-Shik Chang3e2a3062004-01-17 14:29:29 +0000462
463# Hye-Shik Chang's CJKCodecs
464
465# multibytecodec is required for all the other CJK codec modules
466#_multibytecodec cjkcodecs/multibytecodec.c
467
Hye-Shik Chang2bb146f2004-07-18 03:06:29 +0000468#_codecs_cn cjkcodecs/_codecs_cn.c
469#_codecs_hk cjkcodecs/_codecs_hk.c
470#_codecs_iso2022 cjkcodecs/_codecs_iso2022.c
471#_codecs_jp cjkcodecs/_codecs_jp.c
472#_codecs_kr cjkcodecs/_codecs_kr.c
473#_codecs_tw cjkcodecs/_codecs_tw.c
Hye-Shik Chang3e2a3062004-01-17 14:29:29 +0000474
Andrew M. Kuchlinge7c66912001-01-29 20:13:11 +0000475# Example -- included for reference only:
476# xx xxmodule.c
477
Tim Peters6d6c1a32001-08-02 04:15:00 +0000478# Another example -- the 'xxsubtype' module shows C-level subtyping in action
479xxsubtype xxsubtype.c