Lib/test/regrtest.py

#! /usr/bin/env python

"""Regression test.

This will find all modules whose name is "test_*" in the test
directory, and run them.  Various command line options provide
additional facilities.

Command line options:

-v: verbose    -- run tests in verbose mode with output to stdout
-w: verbose2   -- re-run failed tests in verbose mode
-q: quiet      -- don't print anything except if a test fails
-x: exclude    -- arguments are tests to *exclude*
-s: single     -- run only a single test (see below)
-S: slow       -- print the slowest 10 tests
-r: random     -- randomize test execution order
-f: fromfile   -- read names of tests to run from a file (see below)
-l: findleaks  -- if GC is available detect tests that leak memory
-u: use        -- specify which special resource intensive tests to run
-h: help       -- print this text and exit
-t: threshold  -- call gc.set_threshold(N)
-T: coverage   -- turn on code coverage using the trace module
-D: coverdir   -- Directory where coverage files are put
-N: nocoverdir -- Put coverage files alongside modules
-L: runleaks   -- run the leaks(1) command just before exit
-R: huntrleaks -- search for reference leaks (needs debug build, v. slow)
-M: memlimit   -- run very large memory-consuming tests
-j: multiprocess -- run several processes at once

If non-option arguments are present, they are names for tests to run,
unless -x is given, in which case they are names for tests not to run.
If no test names are given, all tests are run.

-r randomizes test execution order. You can use --randseed=int to provide a
int seed value for the randomizer; this is useful for reproducing troublesome
test orders.

-T turns on code coverage tracing with the trace module.

-D specifies the directory where coverage files are put.

-N Put coverage files alongside modules.

-s means to run only a single test and exit.  This is useful when
doing memory analysis on the Python interpreter (which tend to consume
too many resources to run the full regression test non-stop).  The
file /tmp/pynexttest is read to find the next test to run.  If this
file is missing, the first test_*.py file in testdir or on the command
line is used.  (actually tempfile.gettempdir() is used instead of
/tmp).

-f reads the names of tests from the file given as f's argument, one
or more test names per line.  Whitespace is ignored.  Blank lines and
lines beginning with '#' are ignored.  This is especially useful for
whittling down failures involving interactions among tests.

-L causes the leaks(1) command to be run just before exit if it exists.
leaks(1) is available on Mac OS X and presumably on some other
FreeBSD-derived systems.

-R runs each test several times and examines sys.gettotalrefcount() to
see if the test appears to be leaking references.  The argument should
be of the form stab:run:fname where 'stab' is the number of times the
test is run to let gettotalrefcount settle down, 'run' is the number
of times further it is run and 'fname' is the name of the file the
reports are written to.  These parameters all have defaults (5, 4 and
"reflog.txt" respectively), so the minimal invocation is '-R ::'.

-M runs tests that require an exorbitant amount of memory. These tests
typically try to ascertain containers keep working when containing more than
2 billion objects, which only works on 64-bit systems. There are also some
tests that try to exhaust the address space of the process, which only makes
sense on 32-bit systems with at least 2Gb of memory. The passed-in memlimit,
which is a string in the form of '2.5Gb', determines howmuch memory the
tests will limit themselves to (but they may go slightly over.) The number
shouldn't be more memory than the machine has (including swap memory). You
should also keep in mind that swap memory is generally much, much slower
than RAM, and setting memlimit to all available RAM or higher will heavily
tax the machine. On the other hand, it is no use running these tests with a
limit of less than 2.5Gb, and many require more than 20Gb. Tests that expect
to use more than memlimit memory will be skipped. The big-memory tests
generally run very, very long.

-u is used to specify which special resource intensive tests to run,
such as those requiring large file support or network connectivity.
The argument is a comma-separated list of words indicating the
resources to test.  Currently only the following are defined:

    all -       Enable all special resources.

    audio -     Tests that use the audio device.  (There are known
                cases of broken audio drivers that can crash Python or
                even the Linux kernel.)

    curses -    Tests that use curses and will modify the terminal's
                state and output modes.

    lib2to3 -   Run the tests for 2to3 (They take a while.)

    largefile - It is okay to run some test that may create huge
                files.  These tests can take a long time and may
                consume >2GB of disk space temporarily.

    network -   It is okay to run tests that use external network
                resource, e.g. testing SSL support for sockets.

    bsddb -     It is okay to run the bsddb testsuite, which takes
                a long time to complete.

    decimal -   Test the decimal module against a large suite that
                verifies compliance with standards.

    compiler -  Test the compiler package by compiling all the source
                in the standard library and test suite.  This takes
                a long time.  Enabling this resource also allows
                test_tokenize to verify round-trip lexing on every
                file in the test library.

    subprocess  Run all tests for the subprocess module.

    urlfetch -  It is okay to download files required on testing.

    gui -       Run tests that require a running GUI.

    xpickle -   Test pickle and cPickle against Python 2.4, 2.5 and 2.6 to
                test backwards compatibility. These tests take a long time
                to run.

To enable all resources except one, use '-uall,-<resource>'.  For
example, to run all the tests except for the bsddb tests, give the
option '-uall,-bsddb'.
"""

import cStringIO
import getopt
import json
import os
import random
import re
import sys
import time
import traceback
import warnings
import unittest

# I see no other way to suppress these warnings;
# putting them in test_grammar.py has no effect:
warnings.filterwarnings("ignore", "hex/oct constants", FutureWarning,
                        ".*test.test_grammar$")
if sys.maxint > 0x7fffffff:
    # Also suppress them in <string>, because for 64-bit platforms,
    # that's where test_grammar.py hides them.
    warnings.filterwarnings("ignore", "hex/oct constants", FutureWarning,
                            "<string>")

# Ignore ImportWarnings that only occur in the source tree,
# (because of modules with the same name as source-directories in Modules/)
for mod in ("ctypes", "gzip", "zipfile", "tarfile", "encodings.zlib_codec",
            "test.test_zipimport", "test.test_zlib", "test.test_zipfile",
            "test.test_codecs", "test.string_tests"):
    warnings.filterwarnings(module=".*%s$" % (mod,),
                            action="ignore", category=ImportWarning)

# MacOSX (a.k.a. Darwin) has a default stack size that is too small
# for deeply recursive regular expressions.  We see this as crashes in
# the Python test suite when running test_re.py and test_sre.py.  The
# fix is to set the stack limit to 2048.
# This approach may also be useful for other Unixy platforms that
# suffer from small default stack limits.
if sys.platform == 'darwin':
    try:
        import resource
    except ImportError:
        pass
    else:
        soft, hard = resource.getrlimit(resource.RLIMIT_STACK)
        newsoft = min(hard, max(soft, 1024*2048))
        resource.setrlimit(resource.RLIMIT_STACK, (newsoft, hard))

from test import test_support

RESOURCE_NAMES = ('audio', 'curses', 'largefile', 'network', 'bsddb',
                  'decimal', 'compiler', 'subprocess', 'urlfetch', 'gui',
                  'xpickle')


def usage(code, msg=''):
    print __doc__
    if msg: print msg
    sys.exit(code)


def main(tests=None, testdir=None, verbose=0, quiet=False,
         exclude=False, single=False, randomize=False, fromfile=None,
         findleaks=False, use_resources=None, trace=False, coverdir='coverage',
         runleaks=False, huntrleaks=False, verbose2=False, print_slow=False,
         random_seed=None, use_mp=None):
    """Execute a test suite.

    This also parses command-line options and modifies its behavior
    accordingly.

    tests -- a list of strings containing test names (optional)
    testdir -- the directory in which to look for tests (optional)

    Users other than the Python test suite will certainly want to
    specify testdir; if it's omitted, the directory containing the
    Python test suite is searched for.

    If the tests argument is omitted, the tests listed on the
    command-line will be used.  If that's empty, too, then all *.py
    files beginning with test_ will be used.

    The other default arguments (verbose, quiet, exclude,
    single, randomize, findleaks, use_resources, trace, coverdir, print_slow and
    random_seed) allow programmers calling main() directly to set the
    values that would normally be set by flags on the command line.
    """

    test_support.record_original_stdout(sys.stdout)
    try:
        opts, args = getopt.getopt(sys.argv[1:], 'hvgqxsSrf:lu:t:TD:NLR:wM:j:',
                                   ['help', 'verbose', 'quiet', 'exclude',
                                    'single', 'slow', 'random', 'fromfile',
                                    'findleaks', 'use=', 'threshold=', 'trace',
                                    'coverdir=', 'nocoverdir', 'runleaks',
                                    'huntrleaks=', 'verbose2', 'memlimit=',
                                    'randseed=', 'multiprocess=', 'slaveargs=',
                                    ])
    except getopt.error, msg:
        usage(2, msg)

    # Defaults
    if random_seed is None:
        random_seed = random.randrange(10000000)
    if use_resources is None:
        use_resources = []
    for o, a in opts:
        if o in ('-h', '--help'):
            usage(0)
        elif o in ('-v', '--verbose'):
            verbose += 1
        elif o in ('-w', '--verbose2'):
            verbose2 = True
        elif o in ('-q', '--quiet'):
            quiet = True;
            verbose = 0
        elif o in ('-x', '--exclude'):
            exclude = True
        elif o in ('-s', '--single'):
            single = True
        elif o in ('-S', '--slow'):
            print_slow = True
        elif o in ('-r', '--randomize'):
            randomize = True
        elif o == '--randseed':
            random_seed = int(a)
        elif o in ('-f', '--fromfile'):
            fromfile = a
        elif o in ('-l', '--findleaks'):
            findleaks = True
        elif o in ('-L', '--runleaks'):
            runleaks = True
        elif o in ('-t', '--threshold'):
            import gc
            gc.set_threshold(int(a))
        elif o in ('-T', '--coverage'):
            trace = True
        elif o in ('-D', '--coverdir'):
            coverdir = os.path.join(os.getcwd(), a)
        elif o in ('-N', '--nocoverdir'):
            coverdir = None
        elif o in ('-R', '--huntrleaks'):
            huntrleaks = a.split(':')
            if len(huntrleaks) != 3:
                print a, huntrleaks
                usage(2, '-R takes three colon-separated arguments')
            if len(huntrleaks[0]) == 0:
                huntrleaks[0] = 5
            else:
                huntrleaks[0] = int(huntrleaks[0])
            if len(huntrleaks[1]) == 0:
                huntrleaks[1] = 4
            else:
                huntrleaks[1] = int(huntrleaks[1])
            if len(huntrleaks[2]) == 0:
                huntrleaks[2] = "reflog.txt"
        elif o in ('-M', '--memlimit'):
            test_support.set_memlimit(a)
        elif o in ('-u', '--use'):
            u = [x.lower() for x in a.split(',')]
            for r in u:
                if r == 'all':
                    use_resources[:] = RESOURCE_NAMES
                    continue
                remove = False
                if r[0] == '-':
                    remove = True
                    r = r[1:]
                if r not in RESOURCE_NAMES:
                    usage(1, 'Invalid -u/--use option: ' + a)
                if remove:
                    if r in use_resources:
                        use_resources.remove(r)
                elif r not in use_resources:
                    use_resources.append(r)
        elif o in ('-j', '--multiprocess'):
            use_mp = int(a)
        elif o == '--slaveargs':
            args, kwargs = json.loads(a)
            try:
                result = runtest(*args, **kwargs)
            except BaseException, e:
                result = -4, e.__class__.__name__
            print   # Force a newline (just in case)
            print json.dumps(result)
            sys.exit(0)
    if single and fromfile:
        usage(2, "-s and -f don't go together!")
    if use_mp and trace:
        usage(2, "-T and -j don't go together!")
    if use_mp and findleaks:
        usage(2, "-l and -j don't go together!")

    good = []
    bad = []
    skipped = []
    resource_denieds = []
    environment_changed = []

    if findleaks:
        try:
            import gc
        except ImportError:
            print 'No GC available, disabling findleaks.'
            findleaks = False
        else:
            # Uncomment the line below to report garbage that is not
            # freeable by reference counting alone.  By default only
            # garbage that is not collectable by the GC is reported.
            #gc.set_debug(gc.DEBUG_SAVEALL)
            found_garbage = []

    if single:
        from tempfile import gettempdir
        filename = os.path.join(gettempdir(), 'pynexttest')
        try:
            fp = open(filename, 'r')
            next = fp.read().strip()
            tests = [next]
            fp.close()
        except IOError:
            pass

    if fromfile:
        tests = []
        fp = open(fromfile)
        for line in fp:
            guts = line.split() # assuming no test has whitespace in its name
            if guts and not guts[0].startswith('#'):
                tests.extend(guts)
        fp.close()

    # Strip .py extensions.
    if args:
        args = map(removepy, args)
    if tests:
        tests = map(removepy, tests)

    stdtests = STDTESTS[:]
    nottests = NOTTESTS[:]
    if exclude:
        for arg in args:
            if arg in stdtests:
                stdtests.remove(arg)
        nottests[:0] = args
        args = []
    tests = tests or args or findtests(testdir, stdtests, nottests)
    if single:
        tests = tests[:1]
    if randomize:
        random.seed(random_seed)
        print "Using random seed", random_seed
        random.shuffle(tests)
    if trace:
        import trace
        tracer = trace.Trace(ignoredirs=[sys.prefix, sys.exec_prefix],
                             trace=False, count=True)
    test_times = []
    test_support.use_resources = use_resources
    save_modules = sys.modules.keys()

    def accumulate_result(test, result):
        ok, test_time = result
        test_times.append((test_time, test))
        if ok > 0:
            good.append(test)
        elif -2 < ok <= 0:
            bad.append(test)
            if ok == -1:
                environment_changed.append(test)
        else:
            skipped.append(test)
            if ok == -3:
                resource_denieds.append(test)

    if use_mp:
        from threading import Thread
        from Queue import Queue, Empty
        from subprocess import Popen, PIPE, STDOUT
        from collections import deque
        debug_output_pat = re.compile(r"\[\d+ refs\]$")
        pending = deque()
        output = Queue()
        for test in tests:
            args_tuple = (
                (test, verbose, quiet, testdir),
                dict(huntrleaks=huntrleaks, use_resources=use_resources)
            )
            pending.append((test, args_tuple))
        def work():
            # A worker thread.
            try:
                while True:
                    try:
                        test, args_tuple = pending.popleft()
                    except IndexError:
                        output.put((None, None, None))
                        return
                    if not quiet:
                        print test
                        sys.stdout.flush()
                    # -E is needed by some tests, e.g. test_import
                    popen = Popen([sys.executable, '-E', '-m', 'test.regrtest',
                                   '--slaveargs', json.dumps(args_tuple)],
                                   stdout=PIPE, stderr=STDOUT,
                                   universal_newlines=True, close_fds=True)
                    out = popen.communicate()[0].strip()
                    out = debug_output_pat.sub("", out)
                    out, _, result = out.strip().rpartition("\n")
                    result = json.loads(result)
                    output.put((test, out.strip(), result))
            except BaseException:
                output.put((None, None, None))
                raise
        workers = [Thread(target=work) for i in range(use_mp)]
        for worker in workers:
            worker.start()
        finished = 0
        while finished < use_mp:
            test, out, result = output.get()
            if test is None:
                finished += 1
                continue
            if out:
                print out
            if result[0] == -4:
                assert result[1] == 'KeyboardInterrupt'
                pending.clear()
                raise KeyboardInterrupt   # What else?
            accumulate_result(test, result)
        for worker in workers:
            worker.join()
    else:
        for test in tests:
            if not quiet:
                print test
                sys.stdout.flush()
            if trace:
                # If we're tracing code coverage, then we don't exit with status
                # if on a false return value from main.
                tracer.runctx('runtest(test, verbose, quiet, testdir)',
                              globals=globals(), locals=vars())
            else:
                try:
                    result = runtest(test, verbose, quiet,
                                     testdir, huntrleaks)
                    accumulate_result(test, result)
                except KeyboardInterrupt:
                    # print a newline separate from the ^C
                    print
                    break
                except:
                    raise
            if findleaks:
                gc.collect()
                if gc.garbage:
                    print "Warning: test created", len(gc.garbage),
                    print "uncollectable object(s)."
                    # move the uncollectable objects somewhere so we don't see
                    # them again
                    found_garbage.extend(gc.garbage)
                    del gc.garbage[:]
            # Unload the newly imported modules (best effort finalization)
            for module in sys.modules.keys():
                if module not in save_modules and module.startswith("test."):
                    test_support.unload(module)

    # The lists won't be sorted if running with -r
    good.sort()
    bad.sort()
    skipped.sort()
    environment_changed.sort()

    if good and not quiet:
        if not bad and not skipped and len(good) > 1:
            print "All",
        print count(len(good), "test"), "OK."
    if print_slow:
        test_times.sort(reverse=True)
        print "10 slowest tests:"
        for time, test in test_times[:10]:
            print "%s: %.1fs" % (test, time)
    if bad:
        bad = set(bad) - set(environment_changed)
        if bad:
            print count(len(bad), "test"), "failed:"
            printlist(bad)
        if environment_changed:
            print "{} altered the execution environment:".format(
                count(len(environment_changed), "test"))
            printlist(environment_changed)
    if skipped and not quiet:
        print count(len(skipped), "test"), "skipped:"
        printlist(skipped)

        e = _ExpectedSkips()
        plat = sys.platform
        if e.isvalid():
            surprise = set(skipped) - e.getexpected() - set(resource_denieds)
            if surprise:
                print count(len(surprise), "skip"), \
                      "unexpected on", plat + ":"
                printlist(surprise)
            else:
                print "Those skips are all expected on", plat + "."
        else:
            print "Ask someone to teach regrtest.py about which tests are"
            print "expected to get skipped on", plat + "."

    if verbose2 and bad:
        print "Re-running failed tests in verbose mode"
        for test in bad:
            print "Re-running test %r in verbose mode" % test
            sys.stdout.flush()
            try:
                test_support.verbose = True
                ok = runtest(test, True, quiet, testdir,
                             huntrleaks)
            except KeyboardInterrupt:
                # print a newline separate from the ^C
                print
                break
            except:
                raise

    if single:
        alltests = findtests(testdir, stdtests, nottests)
        for i in range(len(alltests)):
            if tests[0] == alltests[i]:
                if i == len(alltests) - 1:
                    os.unlink(filename)
                else:
                    fp = open(filename, 'w')
                    fp.write(alltests[i+1] + '\n')
                    fp.close()
                break
        else:
            os.unlink(filename)

    if trace:
        r = tracer.results()
        r.write_results(show_missing=True, summary=True, coverdir=coverdir)

    if runleaks:
        os.system("leaks %d" % os.getpid())

    sys.exit(len(bad) > 0)


STDTESTS = [
    'test_grammar',
    'test_opcodes',
    'test_dict',
    'test_builtin',
    'test_exceptions',
    'test_types',
    'test_unittest',
    'test_doctest',
    'test_doctest2',
   ]

NOTTESTS = [
    'test_support',
    'test_future1',
    'test_future2',
    ]

def findtests(testdir=None, stdtests=STDTESTS, nottests=NOTTESTS):
    """Return a list of all applicable test modules."""
    if not testdir: testdir = findtestdir()
    names = os.listdir(testdir)
    tests = []
    for name in names:
        if name[:5] == "test_" and name[-3:] == os.extsep+"py":
            modname = name[:-3]
            if modname not in stdtests and modname not in nottests:
                tests.append(modname)
    tests.sort()
    return stdtests + tests

def runtest(test, verbose, quiet,
            testdir=None, huntrleaks=False, use_resources=None):
    """Run a single test.

    test -- the name of the test
    verbose -- if true, print more messages
    quiet -- if true, don't print 'skipped' messages (probably redundant)
    test_times -- a list of (time, test_name) pairs
    testdir -- test directory
    huntrleaks -- run multiple times to test for leaks; requires a debug
                  build; a triple corresponding to -R's three arguments
    Return:
        -4  KeyboardInterrupt when run under -j
        -3  test skipped because resource denied
        -2  test skipped for some other reason
        -1  test failed because it changed the execution environment
         0  test failed
         1  test passed
    """

    test_support.verbose = verbose  # Tell tests to be moderately quiet
    if use_resources is not None:
        test_support.use_resources = use_resources
    try:
        return runtest_inner(test, verbose, quiet,
                             testdir, huntrleaks)
    finally:
        cleanup_test_droppings(test, verbose)


# Unit tests are supposed to leave the execution environment unchanged
# once they complete.  But sometimes tests have bugs, especially when
# tests fail, and the changes to environment go on to mess up other
# tests.  This can cause issues with buildbot stability, since tests
# are run in random order and so problems may appear to come and go.
# There are a few things we can save and restore to mitigate this, and
# the following context manager handles this task.

class saved_test_environment:
    """Save bits of the test environment and restore them at block exit.

        with saved_test_environment(testname, quiet):
            #stuff

    Unless quiet is True, a warning is printed to stderr if any of
    the saved items was changed by the test.  The attribute 'changed'
    is initially False, but is set to True if a change is detected.
    """

    changed = False

    def __init__(self, testname, quiet=False):
        self.testname = testname
        self.quiet = quiet

    # To add things to save and restore, add a name XXX to the resources list
    # and add corresponding get_XXX/restore_XXX functions.  get_XXX should
    # return the value to be saved and compared against a second call to the
    # get function when test execution completes.  restore_XXX should accept
    # the saved value and restore the resource using it.  It will be called if
    # and only if a change in the value is detected.  XXX will have any '_'
    # replaced with '.' characters and will then be used in the error messages
    # as the name of the resource that changed.

    resources = ('sys_argv', 'cwd', 'sys_stdin', 'sys_stdout', 'sys_stderr',
                 'os_environ', 'sys_path')

    def get_sys_argv(self):
        return sys.argv[:]
    def restore_sys_argv(self, saved_argv):
        sys.argv[:] = saved_argv

    def get_cwd(self):
        return os.getcwd()
    def restore_cwd(self, saved_cwd):
        os.chdir(saved_cwd)

    def get_sys_stdout(self):
        return sys.stdout
    def restore_sys_stdout(self, saved_stdout):
        sys.stdout = saved_stdout

    def get_sys_stderr(self):
        return sys.stderr
    def restore_sys_stderr(self, saved_stderr):
        sys.stderr = saved_stderr

    def get_sys_stdin(self):
        return sys.stdin
    def restore_sys_stdin(self, saved_stdin):
        sys.stdin = saved_stdin

    def get_os_environ(self):
        return dict(os.environ)
    def restore_os_environ(self, saved_environ):
        os.environ.clear()
        os.environ.update(saved_environ)

    def get_sys_path(self):
        return sys.path[:]
    def restore_sys_path(self, saved_path):
        sys.path[:] = saved_path

    def __enter__(self):
        self.saved_values = dict((name, getattr(self, 'get_'+name)())
            for name in self.resources)
        return self

    def __exit__(self, exc_type, exc_val, exc_tb):
        for name in self.resources:
            if not getattr(self, 'get_'+name)() == self.saved_values[name]:
                self.changed = True
                getattr(self, 'restore_'+name)(self.saved_values[name])
                if not self.quiet:
                    print >>sys.stderr, ("Warning -- {} was modified "
                        "by {}").format(name.replace('_', '.'), self.testname)
        return False


def runtest_inner(test, verbose, quiet,
                  testdir=None, huntrleaks=False):
    test_support.unload(test)
    if not testdir:
        testdir = findtestdir()
    if verbose:
        capture_stdout = None
    else:
        capture_stdout = cStringIO.StringIO()

    test_time = 0.0
    refleak = False  # True if the test leaked references.
    try:
        save_stdout = sys.stdout
        try:
            if capture_stdout:
                sys.stdout = capture_stdout
            if test.startswith('test.'):
                abstest = test
            else:
                # Always import it from the test package
                abstest = 'test.' + test
            with saved_test_environment(test, quiet) as environment:
                start_time = time.time()
                the_package = __import__(abstest, globals(), locals(), [])
                the_module = getattr(the_package, test)
                # Old tests run to completion simply as a side-effect of
                # being imported.  For tests based on unittest or doctest,
                # explicitly invoke their test_main() function (if it exists).
                indirect_test = getattr(the_module, "test_main", None)
                if indirect_test is not None:
                    indirect_test()
                if huntrleaks:
                    refleak = dash_R(the_module, test, indirect_test,
                        huntrleaks)
                test_time = time.time() - start_time
        finally:
            sys.stdout = save_stdout
    except test_support.ResourceDenied, msg:
        if not quiet:
            print test, "skipped --", msg
            sys.stdout.flush()
        return -3, test_time
    except unittest.SkipTest, msg:
        if not quiet:
            print test, "skipped --", msg
            sys.stdout.flush()
        return -2, test_time
    except KeyboardInterrupt:
        raise
    except test_support.TestFailed, msg:
        print "test", test, "failed --", msg
        sys.stdout.flush()
        return 0, test_time
    except:
        type, value = sys.exc_info()[:2]
        print "test", test, "crashed --", str(type) + ":", value
        sys.stdout.flush()
        if verbose:
            traceback.print_exc(file=sys.stdout)
            sys.stdout.flush()
        return 0, test_time
    else:
        if refleak:
            return 0, test_time
        if environment.changed:
            return -1, test_time
        # Except in verbose mode, tests should not print anything
        if verbose or huntrleaks:
            return 1, test_time
        output = capture_stdout.getvalue()
        if not output:
            return 1, test_time
        print "test", test, "produced unexpected output:"
        print "*" * 70
        print output
        print "*" * 70
        sys.stdout.flush()
        return 0, test_time

def cleanup_test_droppings(testname, verbose):
    import shutil
    import stat

    # Try to clean up junk commonly left behind.  While tests shouldn't leave
    # any files or directories behind, when a test fails that can be tedious
    # for it to arrange.  The consequences can be especially nasty on Windows,
    # since if a test leaves a file open, it cannot be deleted by name (while
    # there's nothing we can do about that here either, we can display the
    # name of the offending test, which is a real help).
    for name in (test_support.TESTFN,
                 "db_home",
                ):
        if not os.path.exists(name):
            continue

        if os.path.isdir(name):
            kind, nuker = "directory", shutil.rmtree
        elif os.path.isfile(name):
            kind, nuker = "file", os.unlink
        else:
            raise SystemError("os.path says %r exists but is neither "
                              "directory nor file" % name)

        if verbose:
            print "%r left behind %s %r" % (testname, kind, name)
        try:
            # if we have chmod, fix possible permissions problems
            # that might prevent cleanup
            if (hasattr(os, 'chmod')):
                os.chmod(name, stat.S_IRWXU | stat.S_IRWXG | stat.S_IRWXO)
            nuker(name)
        except Exception, msg:
            print >> sys.stderr, ("%r left behind %s %r and it couldn't be "
                "removed: %s" % (testname, kind, name, msg))

def dash_R(the_module, test, indirect_test, huntrleaks):
    """Run a test multiple times, looking for reference leaks.

    Returns:
        False if the test didn't leak references; True if we detected refleaks.
    """
    # This code is hackish and inelegant, but it seems to do the job.
    import copy_reg, _abcoll, _pyio

    if not hasattr(sys, 'gettotalrefcount'):
        raise Exception("Tracking reference leaks requires a debug build "
                        "of Python")

    # Save current values for dash_R_cleanup() to restore.
    fs = warnings.filters[:]
    ps = copy_reg.dispatch_table.copy()
    pic = sys.path_importer_cache.copy()
    abcs = {}
    modules = _abcoll, _pyio
    for abc in [getattr(mod, a) for mod in modules for a in mod.__all__]:
        # XXX isinstance(abc, ABCMeta) leads to infinite recursion
        if not hasattr(abc, '_abc_registry'):
            continue
        for obj in abc.__subclasses__() + [abc]:
            abcs[obj] = obj._abc_registry.copy()

    if indirect_test:
        def run_the_test():
            indirect_test()
    else:
        def run_the_test():
            reload(the_module)

    deltas = []
    nwarmup, ntracked, fname = huntrleaks
    repcount = nwarmup + ntracked
    print >> sys.stderr, "beginning", repcount, "repetitions"
    print >> sys.stderr, ("1234567890"*(repcount//10 + 1))[:repcount]
    dash_R_cleanup(fs, ps, pic, abcs)
    for i in range(repcount):
        rc = sys.gettotalrefcount()
        run_the_test()
        sys.stderr.write('.')
        dash_R_cleanup(fs, ps, pic, abcs)
        if i >= nwarmup:
            deltas.append(sys.gettotalrefcount() - rc - 2)
    print >> sys.stderr
    if any(deltas):
        msg = '%s leaked %s references, sum=%s' % (test, deltas, sum(deltas))
        print >> sys.stderr, msg
        with open(fname, "a") as refrep:
            print >> refrep, msg
            refrep.flush()
        return True
    return False

def dash_R_cleanup(fs, ps, pic, abcs):
    import gc, copy_reg
    import _strptime, linecache
    dircache = test_support.import_module('dircache', deprecated=True)
    import urlparse, urllib, urllib2, mimetypes, doctest
    import struct, filecmp
    from distutils.dir_util import _path_created

    # Clear the warnings registry, so they can be displayed again
    for mod in sys.modules.values():
        if hasattr(mod, '__warningregistry__'):
            del mod.__warningregistry__

    # Restore some original values.
    warnings.filters[:] = fs
    copy_reg.dispatch_table.clear()
    copy_reg.dispatch_table.update(ps)
    sys.path_importer_cache.clear()
    sys.path_importer_cache.update(pic)

    # clear type cache
    sys._clear_type_cache()

    # Clear ABC registries, restoring previously saved ABC registries.
    for abc, registry in abcs.items():
        abc._abc_registry = registry.copy()
        abc._abc_cache.clear()
        abc._abc_negative_cache.clear()

    # Clear assorted module caches.
    _path_created.clear()
    re.purge()
    _strptime._regex_cache.clear()
    urlparse.clear_cache()
    urllib.urlcleanup()
    urllib2.install_opener(None)
    dircache.reset()
    linecache.clearcache()
    mimetypes._default_mime_types()
    filecmp._cache.clear()
    struct._clearcache()
    doctest.master = None

    # Collect cyclic trash.
    gc.collect()

def findtestdir():
    if __name__ == '__main__':
        file = sys.argv[0]
    else:
        file = __file__
    testdir = os.path.dirname(file) or os.curdir
    return testdir

def removepy(name):
    if name.endswith(os.extsep + "py"):
        name = name[:-3]
    return name

def count(n, word):
    if n == 1:
        return "%d %s" % (n, word)
    else:
        return "%d %ss" % (n, word)

def printlist(x, width=70, indent=4):
    """Print the elements of iterable x to stdout.

    Optional arg width (default 70) is the maximum line length.
    Optional arg indent (default 4) is the number of blanks with which to
    begin each line.
    """

    from textwrap import fill
    blanks = ' ' * indent
    print fill(' '.join(map(str, x)), width,
               initial_indent=blanks, subsequent_indent=blanks)

# Map sys.platform to a string containing the basenames of tests
# expected to be skipped on that platform.
#
# Special cases:
#     test_pep277
#         The _ExpectedSkips constructor adds this to the set of expected
#         skips if not os.path.supports_unicode_filenames.
#     test_timeout
#         Controlled by test_timeout.skip_expected.  Requires the network
#         resource and a socket module.
#
# Tests that are expected to be skipped everywhere except on one platform
# are also handled separately.

_expectations = {
    'win32':
        """
        test__locale
        test_bsddb185
        test_bsddb3
        test_commands
        test_crypt
        test_curses
        test_dbm
        test_dl
        test_fcntl
        test_fork1
        test_epoll
        test_gdbm
        test_grp
        test_ioctl
        test_largefile
        test_kqueue
        test_mhlib
        test_openpty
        test_ossaudiodev
        test_pipes
        test_poll
        test_posix
        test_pty
        test_pwd
        test_resource
        test_signal
        test_threadsignals
        test_timing
        test_wait3
        test_wait4
        """,
    'linux2':
        """
        test_bsddb185
        test_curses
        test_dl
        test_largefile
        test_kqueue
        test_ossaudiodev
        """,
   'mac':
        """
        test_atexit
        test_bsddb
        test_bsddb185
        test_bsddb3
        test_bz2
        test_commands
        test_crypt
        test_curses
        test_dbm
        test_dl
        test_fcntl
        test_fork1
        test_epoll
        test_grp
        test_ioctl
        test_largefile
        test_locale
        test_kqueue
        test_mmap
        test_openpty
        test_ossaudiodev
        test_poll
        test_popen
        test_popen2
        test_posix
        test_pty
        test_pwd
        test_resource
        test_signal
        test_sundry
        test_tarfile
        test_timing
        """,
    'unixware7':
        """
        test_bsddb
        test_bsddb185
        test_dl
        test_epoll
        test_largefile
        test_kqueue
        test_minidom
        test_openpty
        test_pyexpat
        test_sax
        test_sundry
        """,
    'openunix8':
        """
        test_bsddb
        test_bsddb185
        test_dl
        test_epoll
        test_largefile
        test_kqueue
        test_minidom
        test_openpty
        test_pyexpat
        test_sax
        test_sundry
        """,
    'sco_sv3':
        """
        test_asynchat
        test_bsddb
        test_bsddb185
        test_dl
        test_fork1
        test_epoll
        test_gettext
        test_largefile
        test_locale
        test_kqueue
        test_minidom
        test_openpty
        test_pyexpat
        test_queue
        test_sax
        test_sundry
        test_thread
        test_threaded_import
        test_threadedtempfile
        test_threading
        """,
    'riscos':
        """
        test_asynchat
        test_atexit
        test_bsddb
        test_bsddb185
        test_bsddb3
        test_commands
        test_crypt
        test_dbm
        test_dl
        test_fcntl
        test_fork1
        test_epoll
        test_gdbm
        test_grp
        test_largefile
        test_locale
        test_kqueue
        test_mmap
        test_openpty
        test_poll
        test_popen2
        test_pty
        test_pwd
        test_strop
        test_sundry
        test_thread
        test_threaded_import
        test_threadedtempfile
        test_threading
        test_timing
        """,
    'darwin':
        """
        test__locale
        test_bsddb
        test_bsddb3
        test_curses
        test_epoll
        test_gdbm
        test_largefile
        test_locale
        test_kqueue
        test_minidom
        test_ossaudiodev
        test_poll
        """,
    'sunos5':
        """
        test_bsddb
        test_bsddb185
        test_curses
        test_dbm
        test_epoll
        test_kqueue
        test_gdbm
        test_gzip
        test_openpty
        test_zipfile
        test_zlib
        """,
    'hp-ux11':
        """
        test_bsddb
        test_bsddb185
        test_curses
        test_dl
        test_epoll
        test_gdbm
        test_gzip
        test_largefile
        test_locale
        test_kqueue
        test_minidom
        test_openpty
        test_pyexpat
        test_sax
        test_zipfile
        test_zlib
        """,
    'atheos':
        """
        test_bsddb185
        test_curses
        test_dl
        test_gdbm
        test_epoll
        test_largefile
        test_locale
        test_kqueue
        test_mhlib
        test_mmap
        test_poll
        test_popen2
        test_resource
        """,
    'cygwin':
        """
        test_bsddb185
        test_bsddb3
        test_curses
        test_dbm
        test_epoll
        test_ioctl
        test_kqueue
        test_largefile
        test_locale
        test_ossaudiodev
        test_socketserver
        """,
    'os2emx':
        """
        test_audioop
        test_bsddb185
        test_bsddb3
        test_commands
        test_curses
        test_dl
        test_epoll
        test_kqueue
        test_largefile
        test_mhlib
        test_mmap
        test_openpty
        test_ossaudiodev
        test_pty
        test_resource
        test_signal
        """,
    'freebsd4':
        """
        test_bsddb
        test_bsddb3
        test_epoll
        test_gdbm
        test_locale
        test_ossaudiodev
        test_pep277
        test_pty
        test_socketserver
        test_tcl
        test_tk
        test_ttk_guionly
        test_ttk_textonly
        test_timeout
        test_urllibnet
        test_multiprocessing
        """,
    'aix5':
        """
        test_bsddb
        test_bsddb185
        test_bsddb3
        test_bz2
        test_dl
        test_epoll
        test_gdbm
        test_gzip
        test_kqueue
        test_ossaudiodev
        test_tcl
        test_tk
        test_ttk_guionly
        test_ttk_textonly
        test_zipimport
        test_zlib
        """,
    'openbsd3':
        """
        test_bsddb
        test_bsddb3
        test_ctypes
        test_dl
        test_epoll
        test_gdbm
        test_locale
        test_normalization
        test_ossaudiodev
        test_pep277
        test_tcl
        test_tk
        test_ttk_guionly
        test_ttk_textonly
        test_multiprocessing
        """,
    'netbsd3':
        """
        test_bsddb
        test_bsddb185
        test_bsddb3
        test_ctypes
        test_curses
        test_dl
        test_epoll
        test_gdbm
        test_locale
        test_ossaudiodev
        test_pep277
        test_tcl
        test_tk
        test_ttk_guionly
        test_ttk_textonly
        test_multiprocessing
        """,
}
_expectations['freebsd5'] = _expectations['freebsd4']
_expectations['freebsd6'] = _expectations['freebsd4']
_expectations['freebsd7'] = _expectations['freebsd4']
_expectations['freebsd8'] = _expectations['freebsd4']

class _ExpectedSkips:
    def __init__(self):
        import os.path
        from test import test_timeout

        self.valid = False
        if sys.platform in _expectations:
            s = _expectations[sys.platform]
            self.expected = set(s.split())

            # expected to be skipped on every platform, even Linux
            self.expected.add('test_linuxaudiodev')

            if not os.path.supports_unicode_filenames:
                self.expected.add('test_pep277')

            if test_timeout.skip_expected:
                self.expected.add('test_timeout')

            if sys.maxint == 9223372036854775807L:
                self.expected.add('test_imageop')

            if not sys.platform in ("mac", "darwin"):
                MAC_ONLY = ["test_macos", "test_macostools", "test_aepack",
                            "test_plistlib", "test_scriptpackages",
                            "test_applesingle"]
                for skip in MAC_ONLY:
                    self.expected.add(skip)
            elif len(u'\0'.encode('unicode-internal')) == 4:
                self.expected.add("test_macostools")


            if sys.platform != "win32":
                # test_sqlite is only reliable on Windows where the library
                # is distributed with Python
                WIN_ONLY = ["test_unicode_file", "test_winreg",
                            "test_winsound", "test_startfile",
                            "test_sqlite"]
                for skip in WIN_ONLY:
                    self.expected.add(skip)

            if sys.platform != 'irix':
                IRIX_ONLY = ["test_imageop", "test_al", "test_cd", "test_cl",
                             "test_gl", "test_imgfile"]
                for skip in IRIX_ONLY:
                    self.expected.add(skip)

            if sys.platform != 'sunos5':
                self.expected.add('test_sunaudiodev')
                self.expected.add('test_nis')

            if not sys.py3kwarning:
                self.expected.add('test_py3kwarn')

            self.valid = True

    def isvalid(self):
        "Return true iff _ExpectedSkips knows about the current platform."
        return self.valid

    def getexpected(self):
        """Return set of test names we expect to skip on current platform.

        self.isvalid() must be true.
        """

        assert self.isvalid()
        return self.expected

if __name__ == '__main__':
    # Remove regrtest.py's own directory from the module search path.  This
    # prevents relative imports from working, and relative imports will screw
    # up the testing framework.  E.g. if both test.test_support and
    # test_support are imported, they will not contain the same globals, and
    # much of the testing framework relies on the globals in the
    # test.test_support module.
    mydir = os.path.abspath(os.path.normpath(os.path.dirname(sys.argv[0])))
    i = pathlen = len(sys.path)
    while i >= 0:
        i -= 1
        if os.path.abspath(os.path.normpath(sys.path[i])) == mydir:
            del sys.path[i]
    if '--slaveargs' not in sys.argv and len(sys.path) == pathlen:
        print 'Could not find %r in sys.path to remove it' % mydir
    main()