Makefile.pre.in

# Top-level Makefile for Python
#
# As distributed, this file is called Makefile.pre.in; it is processed
# into the real Makefile by running the script ./configure, which
# replaces things like @spam@ with values appropriate for your system.
# This means that if you edit Makefile, your changes get lost the next
# time you run the configure script.  Ideally, you can do:
#
#	./configure
#	make
#	make test
#	make install
#
# If you have a previous version of Python installed that you don't
# want to overwrite, you can use "make altinstall" instead of "make
# install".  Refer to the "Installing" section in the README file for
# additional details.
#
# See also the section "Build instructions" in the README file.

# === Variables set by makesetup ===

MODOBJS=        _MODOBJS_
MODLIBS=        _MODLIBS_

# === Variables set by configure
VERSION=	@VERSION@
srcdir=		@srcdir@
VPATH=		@srcdir@
abs_srcdir=	@abs_srcdir@
abs_builddir=	@abs_builddir@


CC=		@CC@
CXX=		@CXX@
MAINCC=		@MAINCC@
LINKCC=		@LINKCC@
AR=		@AR@
RANLIB=		@RANLIB@
READELF=	@READELF@
SOABI=		@SOABI@
LDVERSION=	@LDVERSION@
HGVERSION=	@HGVERSION@
HGTAG=		@HGTAG@
HGBRANCH=	@HGBRANCH@

GNULD=		@GNULD@

# Shell used by make (some versions default to the login shell, which is bad)
SHELL=		/bin/sh

# Use this to make a link between python$(VERSION) and python in $(BINDIR)
LN=		@LN@

# Portable install script (configure doesn't always guess right)
INSTALL=	@INSTALL@
INSTALL_PROGRAM=@INSTALL_PROGRAM@
INSTALL_SCRIPT= @INSTALL_SCRIPT@
INSTALL_DATA=	@INSTALL_DATA@
# Shared libraries must be installed with executable mode on some systems;
# rather than figuring out exactly which, we always give them executable mode.
# Also, making them read-only seems to be a good idea...
INSTALL_SHARED= ${INSTALL} -m 555

MKDIR_P=	@MKDIR_P@

MAKESETUP=      $(srcdir)/Modules/makesetup

# Compiler options
OPT=		@OPT@
BASECFLAGS=	@BASECFLAGS@
BASECPPFLAGS=	@BASECPPFLAGS@
CONFIGURE_CFLAGS=	@CFLAGS@
# CFLAGS_NODIST is used for building the interpreter and stdlib C extensions.
# Use it when a compiler flag should _not_ be part of the distutils CFLAGS
# once Python is installed (Issue #21121).
CONFIGURE_CFLAGS_NODIST=@CFLAGS_NODIST@
CONFIGURE_CPPFLAGS=	@CPPFLAGS@
CONFIGURE_LDFLAGS=	@LDFLAGS@
# Avoid assigning CFLAGS, LDFLAGS, etc. so users can use them on the
# command line to append to these values without stomping the pre-set
# values.
PY_CFLAGS=	$(BASECFLAGS) $(OPT) $(CONFIGURE_CFLAGS) $(CFLAGS) $(EXTRA_CFLAGS)
PY_CFLAGS_NODIST=$(CONFIGURE_CFLAGS_NODIST) $(CFLAGS_NODIST)
# Both CPPFLAGS and LDFLAGS need to contain the shell's value for setup.py to
# be able to build extension modules using the directories specified in the
# environment variables
PY_CPPFLAGS=	$(BASECPPFLAGS) -I. -IInclude -I$(srcdir)/Include $(CONFIGURE_CPPFLAGS) $(CPPFLAGS)
PY_LDFLAGS=	$(CONFIGURE_LDFLAGS) $(LDFLAGS)
NO_AS_NEEDED=	@NO_AS_NEEDED@
LDLAST=		@LDLAST@
SGI_ABI=	@SGI_ABI@
CCSHARED=	@CCSHARED@
LINKFORSHARED=	@LINKFORSHARED@
ARFLAGS=	@ARFLAGS@
# Extra C flags added for building the interpreter object files.
CFLAGSFORSHARED=@CFLAGSFORSHARED@
# C flags used for building the interpreter object files
PY_CORE_CFLAGS=	$(PY_CFLAGS) $(PY_CFLAGS_NODIST) $(PY_CPPFLAGS) $(CFLAGSFORSHARED) -DPy_BUILD_CORE


# Machine-dependent subdirectories
MACHDEP=	@MACHDEP@

# Multiarch directory (may be empty)
MULTIARCH=	@MULTIARCH@

# Install prefix for architecture-independent files
prefix=		@prefix@

# Install prefix for architecture-dependent files
exec_prefix=	@exec_prefix@

# Install prefix for data files
datarootdir=    @datarootdir@

# Expanded directories
BINDIR=		@bindir@
LIBDIR=		@libdir@
MANDIR=		@mandir@
INCLUDEDIR=	@includedir@
CONFINCLUDEDIR=	$(exec_prefix)/include
SCRIPTDIR=	$(prefix)/lib
ABIFLAGS=	@ABIFLAGS@

# Detailed destination directories
BINLIBDEST=	$(LIBDIR)/python$(VERSION)
LIBDEST=	$(SCRIPTDIR)/python$(VERSION)
INCLUDEPY=	$(INCLUDEDIR)/python$(LDVERSION)
CONFINCLUDEPY=	$(CONFINCLUDEDIR)/python$(LDVERSION)

# Symbols used for using shared libraries
SHLIB_SUFFIX=	@SHLIB_SUFFIX@
EXT_SUFFIX=	@EXT_SUFFIX@
LDSHARED=	@LDSHARED@ $(PY_LDFLAGS)
BLDSHARED=	@BLDSHARED@ $(PY_LDFLAGS)
LDCXXSHARED=	@LDCXXSHARED@
DESTSHARED=	$(BINLIBDEST)/lib-dynload

# Executable suffix (.exe on Windows and Mac OS X)
EXE=		@EXEEXT@
BUILDEXE=	@BUILDEXEEXT@

# Short name and location for Mac OS X Python framework
UNIVERSALSDK=@UNIVERSALSDK@
PYTHONFRAMEWORK=	@PYTHONFRAMEWORK@
PYTHONFRAMEWORKDIR=	@PYTHONFRAMEWORKDIR@
PYTHONFRAMEWORKPREFIX=	@PYTHONFRAMEWORKPREFIX@
PYTHONFRAMEWORKINSTALLDIR= @PYTHONFRAMEWORKINSTALLDIR@
# Deployment target selected during configure, to be checked
# by distutils. The export statement is needed to ensure that the
# deployment target is active during build.
MACOSX_DEPLOYMENT_TARGET=@CONFIGURE_MACOSX_DEPLOYMENT_TARGET@
@EXPORT_MACOSX_DEPLOYMENT_TARGET@export MACOSX_DEPLOYMENT_TARGET

# Option to install to strip binaries
STRIPFLAG=-s

# Flags to lipo to produce a 32-bit-only universal executable
LIPO_32BIT_FLAGS=@LIPO_32BIT_FLAGS@

# Options to enable prebinding (for fast startup prior to Mac OS X 10.3)
OTHER_LIBTOOL_OPT=@OTHER_LIBTOOL_OPT@

# Environment to run shared python without installed libraries
RUNSHARED=       @RUNSHARED@

# ensurepip options
ENSUREPIP=      @ENSUREPIP@

# Modes for directories, executables and data files created by the
# install process.  Default to user-only-writable for all file types.
DIRMODE=	755
EXEMODE=	755
FILEMODE=	644

# configure script arguments
CONFIG_ARGS=	@CONFIG_ARGS@


# Subdirectories with code
SRCDIRS= 	@SRCDIRS@

# Other subdirectories
SUBDIRSTOO=	Include Lib Misc

# Files and directories to be distributed
CONFIGFILES=	configure configure.ac acconfig.h pyconfig.h.in Makefile.pre.in
DISTFILES=	README ChangeLog $(CONFIGFILES)
DISTDIRS=	$(SUBDIRS) $(SUBDIRSTOO) Ext-dummy
DIST=		$(DISTFILES) $(DISTDIRS)


LIBRARY=	@LIBRARY@
LDLIBRARY=      @LDLIBRARY@
BLDLIBRARY=     @BLDLIBRARY@
PY3LIBRARY=     @PY3LIBRARY@
DLLLIBRARY=	@DLLLIBRARY@
LDLIBRARYDIR=   @LDLIBRARYDIR@
INSTSONAME=	@INSTSONAME@


LIBS=		@LIBS@
LIBM=		@LIBM@
LIBC=		@LIBC@
SYSLIBS=	$(LIBM) $(LIBC)
SHLIBS=		@SHLIBS@

THREADOBJ=	@THREADOBJ@
DLINCLDIR=	@DLINCLDIR@
DYNLOADFILE=	@DYNLOADFILE@
MACHDEP_OBJS=	@MACHDEP_OBJS@
LIBOBJDIR=	Python/
LIBOBJS=	@LIBOBJS@

PYTHON=		python$(EXE)
BUILDPYTHON=	python$(BUILDEXE)

PYTHON_FOR_BUILD=@PYTHON_FOR_BUILD@
_PYTHON_HOST_PLATFORM=@_PYTHON_HOST_PLATFORM@
BUILD_GNU_TYPE=	@build@
HOST_GNU_TYPE=	@host@

# Tcl and Tk config info from --with-tcltk-includes and -libs options
TCLTK_INCLUDES=	@TCLTK_INCLUDES@
TCLTK_LIBS=	@TCLTK_LIBS@

# The task to run while instrument when building the profile-opt target
PROFILE_TASK=	$(srcdir)/Tools/pybench/pybench.py -n 2 --with-gc --with-syscheck
#PROFILE_TASK=	$(srcdir)/Lib/test/regrtest.py

# report files for gcov / lcov coverage report
COVERAGE_INFO=	$(abs_builddir)/coverage.info
COVERAGE_REPORT=$(abs_builddir)/lcov-report
COVERAGE_REPORT_OPTIONS=--no-branch-coverage --title "CPython lcov report"


# === Definitions added by makesetup ===


##########################################################################
# Modules
MODULE_OBJS=	\
		Modules/config.o \
		Modules/getpath.o \
		Modules/main.o \
		Modules/gcmodule.o

# Used of signalmodule.o is not available
SIGNAL_OBJS=	@SIGNAL_OBJS@

IO_H=		Modules/_io/_iomodule.h

IO_OBJS=	\
		Modules/_io/_iomodule.o \
		Modules/_io/iobase.o \
		Modules/_io/fileio.o \
		Modules/_io/bufferedio.o \
		Modules/_io/textio.o \
		Modules/_io/bytesio.o \
		Modules/_io/stringio.o

##########################################################################
# Grammar
GRAMMAR_H=	Include/graminit.h
GRAMMAR_C=	Python/graminit.c
GRAMMAR_INPUT=	$(srcdir)/Grammar/Grammar


LIBFFI_INCLUDEDIR=	@LIBFFI_INCLUDEDIR@

##########################################################################
# Parser
PGEN=		Parser/pgen$(EXE)

PSRCS=		\
		Parser/acceler.c \
		Parser/grammar1.c \
		Parser/listnode.c \
		Parser/node.c \
		Parser/parser.c \
		Parser/bitset.c \
		Parser/metagrammar.c \
		Parser/firstsets.c \
		Parser/grammar.c \
		Parser/pgen.c

POBJS=		\
		Parser/acceler.o \
		Parser/grammar1.o \
		Parser/listnode.o \
		Parser/node.o \
		Parser/parser.o \
		Parser/bitset.o \
		Parser/metagrammar.o \
		Parser/firstsets.o \
		Parser/grammar.o \
		Parser/pgen.o

PARSER_OBJS=	$(POBJS) Parser/myreadline.o Parser/parsetok.o Parser/tokenizer.o

PGSRCS=		\
		Objects/obmalloc.c \
		Python/dynamic_annotations.c \
		Python/mysnprintf.c \
		Python/pyctype.c \
		Parser/tokenizer_pgen.c \
		Parser/printgrammar.c \
		Parser/parsetok_pgen.c \
		Parser/pgenmain.c

PGOBJS=		\
		Objects/obmalloc.o \
		Python/dynamic_annotations.o \
		Python/mysnprintf.o \
		Python/pyctype.o \
		Parser/tokenizer_pgen.o \
		Parser/printgrammar.o \
		Parser/parsetok_pgen.o \
		Parser/pgenmain.o

PARSER_HEADERS= \
		$(srcdir)/Parser/parser.h \
		$(srcdir)/Include/parsetok.h \
		$(srcdir)/Parser/tokenizer.h

PGENSRCS=	$(PSRCS) $(PGSRCS)
PGENOBJS=	$(POBJS) $(PGOBJS)

##########################################################################
# AST
AST_H_DIR=	Include
AST_H=		$(AST_H_DIR)/Python-ast.h
AST_C_DIR=	Python
AST_C=		$(AST_C_DIR)/Python-ast.c
AST_ASDL=	$(srcdir)/Parser/Python.asdl

ASDLGEN_FILES=	$(srcdir)/Parser/asdl.py $(srcdir)/Parser/asdl_c.py
# Note that a build now requires Python to exist before the build starts.
# Use "hg touch" to fix up screwed up file mtimes in a checkout.
ASDLGEN=	@ASDLGEN@ $(srcdir)/Parser/asdl_c.py

##########################################################################
# Python

OPCODETARGETS_H= \
		Python/opcode_targets.h

OPCODETARGETGEN= \
		$(srcdir)/Python/makeopcodetargets.py

OPCODETARGETGEN_FILES= \
		$(OPCODETARGETGEN) $(srcdir)/Lib/opcode.py

PYTHON_OBJS=	\
		Python/_warnings.o \
		Python/Python-ast.o \
		Python/asdl.o \
		Python/ast.o \
		Python/bltinmodule.o \
		Python/ceval.o \
		Python/compile.o \
		Python/codecs.o \
		Python/dynamic_annotations.o \
		Python/errors.o \
		Python/frozenmain.o \
		Python/future.o \
		Python/getargs.o \
		Python/getcompiler.o \
		Python/getcopyright.o \
		Python/getplatform.o \
		Python/getversion.o \
		Python/graminit.o \
		Python/import.o \
		Python/importdl.o \
		Python/marshal.o \
		Python/modsupport.o \
		Python/mystrtoul.o \
		Python/mysnprintf.o \
		Python/peephole.o \
		Python/pyarena.o \
		Python/pyctype.o \
		Python/pyfpe.o \
		Python/pyhash.o \
		Python/pymath.o \
		Python/pystate.o \
		Python/pythonrun.o \
		Python/pytime.o \
		Python/random.o \
		Python/structmember.o \
		Python/symtable.o \
		Python/sysmodule.o \
		Python/traceback.o \
		Python/getopt.o \
		Python/pystrcmp.o \
		Python/pystrtod.o \
		Python/dtoa.o \
		Python/formatter_unicode.o \
		Python/fileutils.o \
		Python/$(DYNLOADFILE) \
		$(LIBOBJS) \
		$(MACHDEP_OBJS) \
		$(THREADOBJ)


##########################################################################
# Objects
OBJECT_OBJS=	\
		Objects/abstract.o \
		Objects/accu.o \
		Objects/boolobject.o \
		Objects/bytes_methods.o \
		Objects/bytearrayobject.o \
		Objects/bytesobject.o \
		Objects/cellobject.o \
		Objects/classobject.o \
		Objects/codeobject.o \
		Objects/complexobject.o \
		Objects/descrobject.o \
		Objects/enumobject.o \
		Objects/exceptions.o \
		Objects/genobject.o \
		Objects/fileobject.o \
		Objects/floatobject.o \
		Objects/frameobject.o \
		Objects/funcobject.o \
		Objects/iterobject.o \
		Objects/listobject.o \
		Objects/longobject.o \
		Objects/dictobject.o \
		Objects/memoryobject.o \
		Objects/methodobject.o \
		Objects/moduleobject.o \
		Objects/namespaceobject.o \
		Objects/object.o \
		Objects/obmalloc.o \
		Objects/capsule.o \
		Objects/rangeobject.o \
		Objects/setobject.o \
		Objects/sliceobject.o \
		Objects/structseq.o \
		Objects/tupleobject.o \
		Objects/typeobject.o \
		Objects/unicodeobject.o \
		Objects/unicodectype.o \
		Objects/weakrefobject.o

##########################################################################
# objects that get linked into the Python library
LIBRARY_OBJS_OMIT_FROZEN=	\
		Modules/getbuildinfo.o \
		$(PARSER_OBJS) \
		$(OBJECT_OBJS) \
		$(PYTHON_OBJS) \
		$(MODULE_OBJS) \
		$(SIGNAL_OBJS) \
		$(MODOBJS)

LIBRARY_OBJS=	\
		$(LIBRARY_OBJS_OMIT_FROZEN) \
		Python/frozen.o

#########################################################################
# Rules

# Default target
all:		build_all
build_all:	$(BUILDPYTHON) oldsharedmods sharedmods gdbhooks Modules/_testembed python-config

# Compile a binary with gcc profile guided optimization.
profile-opt:
	@echo "Building with support for profile generation:"
	$(MAKE) clean
	$(MAKE) build_all_generate_profile
	@echo "Running benchmark to generate profile data:"
	$(MAKE) profile-removal
	$(MAKE) run_profile_task
	@echo "Rebuilding with profile guided optimizations:"
	$(MAKE) clean
	$(MAKE) build_all_use_profile

build_all_generate_profile:
	$(MAKE) all CFLAGS_NODIST="$(CFLAGS) -fprofile-generate" LDFLAGS="-fprofile-generate" LIBS="$(LIBS) -lgcov"

run_profile_task:
	: # FIXME: can't run for a cross build
	$(RUNSHARED) ./$(BUILDPYTHON) $(PROFILE_TASK)

build_all_use_profile:
	$(MAKE) all CFLAGS_NODIST="$(CFLAGS) -fprofile-use -fprofile-correction"

# Compile and run with gcov
.PHONY=coverage coverage-lcov coverage-report
coverage:
	@echo "Building with support for coverage checking:"
	$(MAKE) clean profile-removal
	$(MAKE) all CFLAGS="$(CFLAGS) -O0 -pg -fprofile-arcs -ftest-coverage" LIBS="$(LIBS) -lgcov"

coverage-lcov:
	@echo "Creating Coverage HTML report with LCOV:"
	@rm -f $(COVERAGE_INFO)
	@rm -rf $(COVERAGE_REPORT)
	@lcov --capture --directory $(abs_builddir) \
	    --base-directory $(realpath $(abs_builddir)) \
	    --path $(realpath $(abs_srcdir)) \
	    --output-file $(COVERAGE_INFO)
	: # remove 3rd party modules and system headers
	@lcov --remove $(COVERAGE_INFO) \
	    '*/Modules/_ctypes/libffi*/*' \
	    '*/Modules/_decimal/libmpdec/*' \
	    '*/Modules/expat/*' \
	    '*/Modules/zlib/*' \
	    '*/Include/*' \
	    '/usr/include/*' \
	    '/usr/local/include/*' \
	    --output-file $(COVERAGE_INFO)
	@genhtml $(COVERAGE_INFO) --output-directory $(COVERAGE_REPORT) \
	    $(COVERAGE_REPORT_OPTIONS)
	@echo
	@echo "lcov report at $(COVERAGE_REPORT)/index.html"
	@echo

coverage-report:
	: # force rebuilding of parser and importlib
	@touch $(GRAMMAR_INPUT)
	@touch $(srcdir)/Lib/importlib/_bootstrap.py
	: # build with coverage info
	$(MAKE) coverage
	: # run tests, ignore failures
	$(TESTRUNNER) $(TESTOPTS) || true
	: # build lcov report
	$(MAKE) coverage-lcov

# Run "Argument Clinic" over all source files
# (depends on python having already been built)
.PHONY=clinic
clinic: $(BUILDPYTHON)
	$(RUNSHARED) $(PYTHON_FOR_BUILD) ./Tools/clinic/clinic.py --make

# Build the interpreter
$(BUILDPYTHON):	Modules/python.o $(LIBRARY) $(LDLIBRARY) $(PY3LIBRARY)
	$(LINKCC) $(PY_LDFLAGS) $(LINKFORSHARED) -o $@ Modules/python.o $(BLDLIBRARY) $(LIBS) $(MODLIBS) $(SYSLIBS) $(LDLAST)

platform: $(BUILDPYTHON) pybuilddir.txt
	$(RUNSHARED) $(PYTHON_FOR_BUILD) -c 'import sys ; from sysconfig import get_platform ; print(get_platform()+"-"+sys.version[0:3])' >platform

# Create build directory and generate the sysconfig build-time data there.
# pybuilddir.txt contains the name of the build dir and is used for
# sys.path fixup -- see Modules/getpath.c.
# Since this step runs before shared modules are built, try to avoid bootstrap
# problems by creating a dummy pybuilddir.txt just to allow interpreter
# initialization to succeed.  It will be overwritten by generate-posix-vars
# or removed in case of failure.
pybuilddir.txt: $(BUILDPYTHON)
	@echo "none" > ./pybuilddir.txt
	$(RUNSHARED) $(PYTHON_FOR_BUILD) -S -m sysconfig --generate-posix-vars ;\
	if test $$? -ne 0 ; then \
		echo "generate-posix-vars failed" ; \
		rm -f ./pybuilddir.txt ; \
		exit 1 ; \
	fi

# Build the shared modules
# Under GNU make, MAKEFLAGS are sorted and normalized; the 's' for
# -s, --silent or --quiet is always the first char.
# Under BSD make, MAKEFLAGS might be " -s -v x=y".
sharedmods: $(BUILDPYTHON) pybuilddir.txt
	@case "$$MAKEFLAGS" in \
	    *\ -s*|s*) quiet="-q";; \
	    *) quiet="";; \
	esac; \
	$(RUNSHARED) CC='$(CC)' LDSHARED='$(BLDSHARED)' OPT='$(OPT)' \
		_TCLTK_INCLUDES='$(TCLTK_INCLUDES)' _TCLTK_LIBS='$(TCLTK_LIBS)' \
		$(PYTHON_FOR_BUILD) $(srcdir)/setup.py $$quiet build

# Build static library
# avoid long command lines, same as LIBRARY_OBJS
$(LIBRARY): $(LIBRARY_OBJS)
	-rm -f $@
	$(AR) $(ARFLAGS) $@ Modules/getbuildinfo.o
	$(AR) $(ARFLAGS) $@ $(PARSER_OBJS)
	$(AR) $(ARFLAGS) $@ $(OBJECT_OBJS)
	$(AR) $(ARFLAGS) $@ $(PYTHON_OBJS) Python/frozen.o
	$(AR) $(ARFLAGS) $@ $(MODULE_OBJS) $(SIGNAL_OBJS)
	$(AR) $(ARFLAGS) $@ $(MODOBJS)
	$(RANLIB) $@

libpython$(LDVERSION).so: $(LIBRARY_OBJS)
	if test $(INSTSONAME) != $(LDLIBRARY); then \
		$(BLDSHARED) -Wl,-h$(INSTSONAME) -o $(INSTSONAME) $(LIBRARY_OBJS) $(MODLIBS) $(SHLIBS) $(LIBC) $(LIBM) $(LDLAST); \
		$(LN) -f $(INSTSONAME) $@; \
	else \
		$(BLDSHARED) -o $@ $(LIBRARY_OBJS) $(MODLIBS) $(SHLIBS) $(LIBC) $(LIBM) $(LDLAST); \
	fi

libpython3.so:	libpython$(LDVERSION).so
	$(BLDSHARED) $(NO_AS_NEEDED) -o $@ -Wl,-h$@ $^

libpython$(LDVERSION).dylib: $(LIBRARY_OBJS)
	 $(CC) -dynamiclib -Wl,-single_module $(PY_LDFLAGS) -undefined dynamic_lookup -Wl,-install_name,$(prefix)/lib/libpython$(LDVERSION).dylib -Wl,-compatibility_version,$(VERSION) -Wl,-current_version,$(VERSION) -o $@ $(LIBRARY_OBJS) $(SHLIBS) $(LIBC) $(LIBM) $(LDLAST); \


libpython$(VERSION).sl: $(LIBRARY_OBJS)
	$(LDSHARED) -o $@ $(LIBRARY_OBJS) $(MODLIBS) $(SHLIBS) $(LIBC) $(LIBM) $(LDLAST)

# Copy up the gdb python hooks into a position where they can be automatically
# loaded by gdb during Lib/test/test_gdb.py
#
# Distributors are likely to want to install this somewhere else e.g. relative
# to the stripped DWARF data for the shared library.
gdbhooks: $(BUILDPYTHON)-gdb.py

SRC_GDB_HOOKS=$(srcdir)/Tools/gdb/libpython.py
$(BUILDPYTHON)-gdb.py: $(SRC_GDB_HOOKS)
	$(INSTALL_DATA) $(SRC_GDB_HOOKS) $(BUILDPYTHON)-gdb.py

# This rule is here for OPENSTEP/Rhapsody/MacOSX. It builds a temporary
# minimal framework (not including the Lib directory and such) in the current
# directory.
RESSRCDIR=Mac/Resources/framework
$(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)/$(PYTHONFRAMEWORK): \
		$(LIBRARY) \
		$(RESSRCDIR)/Info.plist
	$(INSTALL) -d -m $(DIRMODE) $(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)
	$(CC) -o $(LDLIBRARY) $(PY_LDFLAGS) -dynamiclib \
		-all_load $(LIBRARY) -Wl,-single_module \
		-install_name $(DESTDIR)$(PYTHONFRAMEWORKINSTALLDIR)/Versions/$(VERSION)/$(PYTHONFRAMEWORK) \
		-compatibility_version $(VERSION) \
		-current_version $(VERSION) \
		-framework CoreFoundation $(LIBS);
	$(INSTALL) -d -m $(DIRMODE)  \
		$(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)/Resources/English.lproj
	$(INSTALL_DATA) $(RESSRCDIR)/Info.plist \
		$(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)/Resources/Info.plist
	$(LN) -fsn $(VERSION) $(PYTHONFRAMEWORKDIR)/Versions/Current
	$(LN) -fsn Versions/Current/$(PYTHONFRAMEWORK) $(PYTHONFRAMEWORKDIR)/$(PYTHONFRAMEWORK)
	$(LN) -fsn Versions/Current/Resources $(PYTHONFRAMEWORKDIR)/Resources

# This rule builds the Cygwin Python DLL and import library if configured
# for a shared core library; otherwise, this rule is a noop.
$(DLLLIBRARY) libpython$(VERSION).dll.a: $(LIBRARY_OBJS)
	if test -n "$(DLLLIBRARY)"; then \
		$(LDSHARED) -Wl,--out-implib=$@ -o $(DLLLIBRARY) $^ \
			$(LIBS) $(MODLIBS) $(SYSLIBS) $(LDLAST); \
	else true; \
	fi


oldsharedmods: $(SHAREDMODS)


Makefile Modules/config.c: Makefile.pre \
				$(srcdir)/Modules/config.c.in \
				$(MAKESETUP) \
				Modules/Setup.config \
				Modules/Setup \
				Modules/Setup.local
	$(SHELL) $(MAKESETUP) -c $(srcdir)/Modules/config.c.in \
				-s Modules \
				Modules/Setup.config \
				Modules/Setup.local \
				Modules/Setup
	@mv config.c Modules
	@echo "The Makefile was updated, you may need to re-run make."


Modules/Setup: $(srcdir)/Modules/Setup.dist
	@if test -f Modules/Setup; then \
		echo "-----------------------------------------------"; \
		echo "Modules/Setup.dist is newer than Modules/Setup;"; \
		echo "check to make sure you have all the updates you"; \
		echo "need in your Modules/Setup file."; \
		echo "Usually, copying Modules/Setup.dist to Modules/Setup will work."; \
		echo "-----------------------------------------------"; \
	fi

Modules/_testembed: Modules/_testembed.o $(LIBRARY) $(LDLIBRARY) $(PY3LIBRARY)
	$(LINKCC) $(PY_LDFLAGS) $(LINKFORSHARED) -o $@ Modules/_testembed.o $(BLDLIBRARY) $(LIBS) $(MODLIBS) $(SYSLIBS) $(LDLAST)

############################################################################
# Importlib

Modules/_freeze_importlib: Modules/_freeze_importlib.o $(LIBRARY_OBJS_OMIT_FROZEN)
	$(LINKCC) $(PY_LDFLAGS) -o $@ Modules/_freeze_importlib.o $(LIBRARY_OBJS_OMIT_FROZEN) $(LIBS) $(MODLIBS) $(SYSLIBS) $(LDLAST)

Python/importlib.h: $(srcdir)/Lib/importlib/_bootstrap.py Modules/_freeze_importlib.c
	$(MAKE) Modules/_freeze_importlib
	./Modules/_freeze_importlib \
		$(srcdir)/Lib/importlib/_bootstrap.py Python/importlib.h


############################################################################
# Special rules for object files

Modules/getbuildinfo.o: $(PARSER_OBJS) \
		$(OBJECT_OBJS) \
		$(PYTHON_OBJS) \
		$(MODULE_OBJS) \
		$(SIGNAL_OBJS) \
		$(MODOBJS) \
		$(srcdir)/Modules/getbuildinfo.c
	$(CC) -c $(PY_CORE_CFLAGS) \
	      -DHGVERSION="\"`LC_ALL=C $(HGVERSION)`\"" \
	      -DHGTAG="\"`LC_ALL=C $(HGTAG)`\"" \
	      -DHGBRANCH="\"`LC_ALL=C $(HGBRANCH)`\"" \
	      -o $@ $(srcdir)/Modules/getbuildinfo.c

Modules/getpath.o: $(srcdir)/Modules/getpath.c Makefile
	$(CC) -c $(PY_CORE_CFLAGS) -DPYTHONPATH='"$(PYTHONPATH)"' \
		-DPREFIX='"$(prefix)"' \
		-DEXEC_PREFIX='"$(exec_prefix)"' \
		-DVERSION='"$(VERSION)"' \
		-DVPATH='"$(VPATH)"' \
		-o $@ $(srcdir)/Modules/getpath.c

Modules/python.o: $(srcdir)/Modules/python.c
	$(MAINCC) -c $(PY_CORE_CFLAGS) -o $@ $(srcdir)/Modules/python.c

Modules/_testembed.o: $(srcdir)/Modules/_testembed.c
	$(MAINCC) -c $(PY_CORE_CFLAGS) -o $@ $(srcdir)/Modules/_testembed.c

Modules/_sre.o: $(srcdir)/Modules/_sre.c $(srcdir)/Modules/sre.h $(srcdir)/Modules/sre_constants.h $(srcdir)/Modules/sre_lib.h

Modules/posixmodule.o: $(srcdir)/Modules/posixmodule.c $(srcdir)/Modules/posixmodule.h

Modules/grpmodule.o: $(srcdir)/Modules/grpmodule.c $(srcdir)/Modules/posixmodule.h

Modules/pwdmodule.o: $(srcdir)/Modules/pwdmodule.c $(srcdir)/Modules/posixmodule.h

Modules/signalmodule.o: $(srcdir)/Modules/signalmodule.c $(srcdir)/Modules/posixmodule.h

Python/dynload_shlib.o: $(srcdir)/Python/dynload_shlib.c Makefile
	$(CC) -c $(PY_CORE_CFLAGS) \
		-DSOABI='"$(SOABI)"' \
		-o $@ $(srcdir)/Python/dynload_shlib.c

Python/dynload_hpux.o: $(srcdir)/Python/dynload_hpux.c Makefile
	$(CC) -c $(PY_CORE_CFLAGS) \
		-DSHLIB_EXT='"$(EXT_SUFFIX)"' \
		-o $@ $(srcdir)/Python/dynload_hpux.c

Python/sysmodule.o: $(srcdir)/Python/sysmodule.c Makefile
	$(CC) -c $(PY_CORE_CFLAGS) \
		-DABIFLAGS='"$(ABIFLAGS)"' \
		-o $@ $(srcdir)/Python/sysmodule.c

$(IO_OBJS): $(IO_H)

$(GRAMMAR_H): $(GRAMMAR_INPUT) $(PGENSRCS)
		@$(MKDIR_P) Include
		$(MAKE) $(PGEN)
		$(PGEN) $(GRAMMAR_INPUT) $(GRAMMAR_H) $(GRAMMAR_C)
$(GRAMMAR_C): $(GRAMMAR_H) $(GRAMMAR_INPUT) $(PGENSRCS)
		$(MAKE) $(GRAMMAR_H)
		touch $(GRAMMAR_C)

$(PGEN):	$(PGENOBJS)
		$(CC) $(OPT) $(PY_LDFLAGS) $(PGENOBJS) $(LIBS) -o $(PGEN)

Parser/grammar.o:	$(srcdir)/Parser/grammar.c \
				$(srcdir)/Include/token.h \
				$(srcdir)/Include/grammar.h
Parser/metagrammar.o:	$(srcdir)/Parser/metagrammar.c

Parser/tokenizer_pgen.o:	$(srcdir)/Parser/tokenizer.c
Parser/parsetok_pgen.o:	$(srcdir)/Parser/parsetok.c
Parser/printgrammar.o: $(srcdir)/Parser/printgrammar.c

Parser/pgenmain.o:	$(srcdir)/Include/parsetok.h

$(AST_H): $(AST_ASDL) $(ASDLGEN_FILES)
	$(MKDIR_P) $(AST_H_DIR)
	$(ASDLGEN) -h $(AST_H_DIR) $(AST_ASDL)

$(AST_C): $(AST_H) $(AST_ASDL) $(ASDLGEN_FILES)
	$(MKDIR_P) $(AST_C_DIR)
	$(ASDLGEN) -c $(AST_C_DIR) $(AST_ASDL)

Python/compile.o Python/symtable.o Python/ast.o: $(GRAMMAR_H) $(AST_H)

Python/getplatform.o: $(srcdir)/Python/getplatform.c
		$(CC) -c $(PY_CORE_CFLAGS) -DPLATFORM='"$(MACHDEP)"' -o $@ $(srcdir)/Python/getplatform.c

Python/importdl.o: $(srcdir)/Python/importdl.c
		$(CC) -c $(PY_CORE_CFLAGS) -I$(DLINCLDIR) -o $@ $(srcdir)/Python/importdl.c

Objects/unicodectype.o:	$(srcdir)/Objects/unicodectype.c \
				$(srcdir)/Objects/unicodetype_db.h

BYTESTR_DEPS = \
		$(srcdir)/Objects/stringlib/count.h \
		$(srcdir)/Objects/stringlib/ctype.h \
		$(srcdir)/Objects/stringlib/fastsearch.h \
		$(srcdir)/Objects/stringlib/find.h \
		$(srcdir)/Objects/stringlib/join.h \
		$(srcdir)/Objects/stringlib/partition.h \
		$(srcdir)/Objects/stringlib/split.h \
		$(srcdir)/Objects/stringlib/stringdefs.h \
		$(srcdir)/Objects/stringlib/transmogrify.h

UNICODE_DEPS = \
		$(srcdir)/Objects/stringlib/asciilib.h \
		$(srcdir)/Objects/stringlib/codecs.h \
		$(srcdir)/Objects/stringlib/count.h \
		$(srcdir)/Objects/stringlib/fastsearch.h \
		$(srcdir)/Objects/stringlib/find.h \
		$(srcdir)/Objects/stringlib/find_max_char.h \
		$(srcdir)/Objects/stringlib/localeutil.h \
		$(srcdir)/Objects/stringlib/partition.h \
		$(srcdir)/Objects/stringlib/replace.h \
		$(srcdir)/Objects/stringlib/split.h \
		$(srcdir)/Objects/stringlib/ucs1lib.h \
		$(srcdir)/Objects/stringlib/ucs2lib.h \
		$(srcdir)/Objects/stringlib/ucs4lib.h \
		$(srcdir)/Objects/stringlib/undef.h \
		$(srcdir)/Objects/stringlib/unicode_format.h \
		$(srcdir)/Objects/stringlib/unicodedefs.h

Objects/bytesobject.o: $(srcdir)/Objects/bytesobject.c $(BYTESTR_DEPS)

Objects/bytearrayobject.o: $(srcdir)/Objects/bytearrayobject.c $(BYTESTR_DEPS)

Objects/unicodeobject.o: $(srcdir)/Objects/unicodeobject.c $(UNICODE_DEPS)

Objects/dictobject.o: $(srcdir)/Objects/stringlib/eq.h
Objects/setobject.o: $(srcdir)/Objects/stringlib/eq.h

$(OPCODETARGETS_H): $(OPCODETARGETGEN_FILES)
	$(OPCODETARGETGEN) $(OPCODETARGETS_H)

Python/ceval.o: $(OPCODETARGETS_H) $(srcdir)/Python/ceval_gil.h

Python/frozen.o: Python/importlib.h

Objects/typeobject.o: Objects/typeslots.inc
Objects/typeslots.inc: $(srcdir)/Include/typeslots.h $(srcdir)/Objects/typeslots.py
	$(PYTHON) $(srcdir)/Objects/typeslots.py < $(srcdir)/Include/typeslots.h > Objects/typeslots.inc

############################################################################
# Header files

PYTHON_HEADERS= \
		$(srcdir)/Include/Python.h \
		$(srcdir)/Include/abstract.h \
		$(srcdir)/Include/accu.h \
		$(srcdir)/Include/asdl.h \
		$(srcdir)/Include/ast.h \
		$(srcdir)/Include/bltinmodule.h \
		$(srcdir)/Include/bitset.h \
		$(srcdir)/Include/boolobject.h \
		$(srcdir)/Include/bytes_methods.h \
		$(srcdir)/Include/bytearrayobject.h \
		$(srcdir)/Include/bytesobject.h \
		$(srcdir)/Include/cellobject.h \
		$(srcdir)/Include/ceval.h \
		$(srcdir)/Include/classobject.h \
		$(srcdir)/Include/code.h \
		$(srcdir)/Include/codecs.h \
		$(srcdir)/Include/compile.h \
		$(srcdir)/Include/complexobject.h \
		$(srcdir)/Include/descrobject.h \
		$(srcdir)/Include/dictobject.h \
		$(srcdir)/Include/dtoa.h \
		$(srcdir)/Include/dynamic_annotations.h \
		$(srcdir)/Include/enumobject.h \
		$(srcdir)/Include/errcode.h \
		$(srcdir)/Include/eval.h \
		$(srcdir)/Include/fileobject.h \
		$(srcdir)/Include/fileutils.h \
		$(srcdir)/Include/floatobject.h \
		$(srcdir)/Include/frameobject.h \
		$(srcdir)/Include/funcobject.h \
		$(srcdir)/Include/genobject.h \
		$(srcdir)/Include/import.h \
		$(srcdir)/Include/intrcheck.h \
		$(srcdir)/Include/iterobject.h \
		$(srcdir)/Include/listobject.h \
		$(srcdir)/Include/longintrepr.h \
		$(srcdir)/Include/longobject.h \
		$(srcdir)/Include/marshal.h \
		$(srcdir)/Include/memoryobject.h \
		$(srcdir)/Include/metagrammar.h \
		$(srcdir)/Include/methodobject.h \
		$(srcdir)/Include/modsupport.h \
		$(srcdir)/Include/moduleobject.h \
		$(srcdir)/Include/namespaceobject.h \
		$(srcdir)/Include/node.h \
		$(srcdir)/Include/object.h \
		$(srcdir)/Include/objimpl.h \
		$(srcdir)/Include/opcode.h \
		$(srcdir)/Include/osdefs.h \
		$(srcdir)/Include/patchlevel.h \
		$(srcdir)/Include/pgen.h \
		$(srcdir)/Include/pgenheaders.h \
		$(srcdir)/Include/pyarena.h \
		$(srcdir)/Include/pyatomic.h \
		$(srcdir)/Include/pycapsule.h \
		$(srcdir)/Include/pyctype.h \
		$(srcdir)/Include/pydebug.h \
		$(srcdir)/Include/pyerrors.h \
		$(srcdir)/Include/pyfpe.h \
		$(srcdir)/Include/pyhash.h \
		$(srcdir)/Include/pymath.h \
		$(srcdir)/Include/pygetopt.h \
		$(srcdir)/Include/pymacro.h \
		$(srcdir)/Include/pymem.h \
		$(srcdir)/Include/pyport.h \
		$(srcdir)/Include/pystate.h \
		$(srcdir)/Include/pystrcmp.h \
		$(srcdir)/Include/pystrtod.h \
		$(srcdir)/Include/pythonrun.h \
		$(srcdir)/Include/pythread.h \
		$(srcdir)/Include/pytime.h \
		$(srcdir)/Include/rangeobject.h \
		$(srcdir)/Include/setobject.h \
		$(srcdir)/Include/sliceobject.h \
		$(srcdir)/Include/structmember.h \
		$(srcdir)/Include/structseq.h \
		$(srcdir)/Include/symtable.h \
		$(srcdir)/Include/sysmodule.h \
		$(srcdir)/Include/traceback.h \
		$(srcdir)/Include/tupleobject.h \
		$(srcdir)/Include/ucnhash.h \
		$(srcdir)/Include/unicodeobject.h \
		$(srcdir)/Include/warnings.h \
		$(srcdir)/Include/weakrefobject.h \
		pyconfig.h \
		$(PARSER_HEADERS) \
		$(AST_H)

$(LIBRARY_OBJS) $(MODOBJS) Modules/python.o: $(PYTHON_HEADERS)


######################################################################

TESTOPTS=	$(EXTRATESTOPTS)
TESTPYTHON=	$(RUNSHARED) ./$(BUILDPYTHON) $(TESTPYTHONOPTS)
TESTRUNNER=	$(TESTPYTHON) $(srcdir)/Tools/scripts/run_tests.py
TESTTIMEOUT=	3600

# Run a basic set of regression tests.
# This excludes some tests that are particularly resource-intensive.
test:		all platform
		$(TESTRUNNER) $(TESTOPTS)

# Run the full test suite twice - once without .pyc files, and once with.
# In the past, we've had problems where bugs in the marshalling or
# elsewhere caused bytecode read from .pyc files to behave differently
# than bytecode generated directly from a .py source file.  Sometimes
# the bytecode read from a .pyc file had the bug, sometimes the directly
# generated bytecode.  This is sometimes a very shy bug needing a lot of
# sample data.
testall:	all platform
		-find $(srcdir)/Lib -name '*.py[co]' -print | xargs rm -f
		$(TESTPYTHON) -E $(srcdir)/Lib/compileall.py
		-find $(srcdir)/Lib -name '*.py[co]' -print | xargs rm -f
		-$(TESTRUNNER) -u all $(TESTOPTS)
		$(TESTRUNNER) -u all $(TESTOPTS)

# Run the test suite for both architectures in a Universal build on OSX.
# Must be run on an Intel box.
testuniversal:	all platform
		if [ `arch` != 'i386' ];then \
			echo "This can only be used on OSX/i386" ;\
			exit 1 ;\
		fi
		$(TESTRUNNER) -u all $(TESTOPTS)
		$(RUNSHARED) /usr/libexec/oah/translate \
			./$(BUILDPYTHON) -E -m test -j 0 -u all $(TESTOPTS)

# Like testall, but with only one pass and without multiple processes.
# Run an optional script to include information about the build environment.
buildbottest:	all platform
		-@if which pybuildbot.identify >/dev/null 2>&1; then \
			pybuildbot.identify "CC='$(CC)'" "CXX='$(CXX)'"; \
		fi
		$(TESTRUNNER) -j 1 -u all -W --timeout=$(TESTTIMEOUT) $(TESTOPTS)

QUICKTESTOPTS=	$(TESTOPTS) -x test_subprocess test_io test_lib2to3 \
		test_multibytecodec test_urllib2_localnet test_itertools \
		test_multiprocessing_fork test_multiprocessing_spawn \
		test_multiprocessing_forkserver \
		test_mailbox test_socket test_poll \
		test_select test_zipfile test_concurrent_futures
quicktest:	all platform
		$(TESTRUNNER) $(QUICKTESTOPTS)


install: @FRAMEWORKINSTALLFIRST@ commoninstall bininstall maninstall @FRAMEWORKINSTALLLAST@
	if test "x$(ENSUREPIP)" != "xno"  ; then \
		case $(ENSUREPIP) in \
			upgrade) ensurepip="--upgrade" ;; \
			install|*) ensurepip="" ;; \
		esac; \
		$(RUNSHARED) $(PYTHON_FOR_BUILD) -m ensurepip \
			$$ensurepip --root=$(DESTDIR)/ ; \
	fi

altinstall: commoninstall
	if test "x$(ENSUREPIP)" != "xno"  ; then \
		case $(ENSUREPIP) in \
			upgrade) ensurepip="--altinstall --upgrade" ;; \
			install|*) ensurepip="--altinstall" ;; \
		esac; \
		$(RUNSHARED) $(PYTHON_FOR_BUILD) -m ensurepip \
			$$ensurepip --root=$(DESTDIR)/ ; \
	fi

commoninstall:  @FRAMEWORKALTINSTALLFIRST@ \
		altbininstall libinstall inclinstall libainstall \
		sharedinstall oldsharedinstall altmaninstall \
		@FRAMEWORKALTINSTALLLAST@

# Install shared libraries enabled by Setup
DESTDIRS=	$(exec_prefix) $(LIBDIR) $(BINLIBDEST) $(DESTSHARED)

oldsharedinstall: $(DESTSHARED) $(SHAREDMODS)
		@for i in X $(SHAREDMODS); do \
		  if test $$i != X; then \
		    echo $(INSTALL_SHARED) $$i $(DESTSHARED)/`basename $$i`; \
		    $(INSTALL_SHARED) $$i $(DESTDIR)$(DESTSHARED)/`basename $$i`; \
		  fi; \
		done

$(DESTSHARED):
		@for i in $(DESTDIRS); \
		do \
			if test ! -d $(DESTDIR)$$i; then \
				echo "Creating directory $$i"; \
				$(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \
			else    true; \
			fi; \
		done

# Install the interpreter with $(VERSION) affixed
# This goes into $(exec_prefix)
altbininstall: $(BUILDPYTHON) @FRAMEWORKPYTHONW@
	@for i in $(BINDIR) $(LIBDIR); \
	do \
		if test ! -d $(DESTDIR)$$i; then \
			echo "Creating directory $$i"; \
			$(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \
		else	true; \
		fi; \
	done
	if test "$(PYTHONFRAMEWORKDIR)" = "no-framework" ; then \
		$(INSTALL_PROGRAM) $(BUILDPYTHON) $(DESTDIR)$(BINDIR)/python$(LDVERSION)$(EXE); \
	else \
		$(INSTALL_PROGRAM) $(STRIPFLAG) Mac/pythonw $(DESTDIR)$(BINDIR)/python$(LDVERSION)$(EXE); \
	fi
	-if test "$(VERSION)" != "$(LDVERSION)"; then \
		if test -f $(DESTDIR)$(BINDIR)/python$(VERSION)$(EXE) -o -h $(DESTDIR)$(BINDIR)/python$(VERSION)$(EXE); \
		then rm -f $(DESTDIR)$(BINDIR)/python$(VERSION)$(EXE); \
		fi; \
		(cd $(DESTDIR)$(BINDIR); $(LN) python$(LDVERSION)$(EXE) python$(VERSION)$(EXE)); \
	fi
	if test -f $(LDLIBRARY) && test "$(PYTHONFRAMEWORKDIR)" = "no-framework" ; then \
		if test -n "$(DLLLIBRARY)" ; then \
			$(INSTALL_SHARED) $(DLLLIBRARY) $(DESTDIR)$(BINDIR); \
		else \
			$(INSTALL_SHARED) $(LDLIBRARY) $(DESTDIR)$(LIBDIR)/$(INSTSONAME); \
			if test $(LDLIBRARY) != $(INSTSONAME); then \
				(cd $(DESTDIR)$(LIBDIR); $(LN) -sf $(INSTSONAME) $(LDLIBRARY)) \
			fi \
		fi; \
		if test -n "$(PY3LIBRARY)"; then \
			$(INSTALL_SHARED) $(PY3LIBRARY) $(DESTDIR)$(LIBDIR)/$(PY3LIBRARY); \
		fi; \
	else	true; \
	fi
	if test "x$(LIPO_32BIT_FLAGS)" != "x" ; then \
		rm -f $(DESTDIR)$(BINDIR)python$(VERSION)-32$(EXE); \
		lipo $(LIPO_32BIT_FLAGS) \
			-output $(DESTDIR)$(BINDIR)/python$(VERSION)-32$(EXE) \
			$(DESTDIR)$(BINDIR)/python$(VERSION)$(EXE); \
	fi

bininstall: altbininstall
	-if test -f $(DESTDIR)$(BINDIR)/python3$(EXE) -o -h $(DESTDIR)$(BINDIR)/python3$(EXE); \
	then rm -f $(DESTDIR)$(BINDIR)/python3$(EXE); \
	else true; \
	fi
	(cd $(DESTDIR)$(BINDIR); $(LN) -s python$(VERSION)$(EXE) python3$(EXE))
	-if test "$(VERSION)" != "$(LDVERSION)"; then \
		rm -f $(DESTDIR)$(BINDIR)/python$(VERSION)-config; \
		(cd $(DESTDIR)$(BINDIR); $(LN) -s python$(LDVERSION)-config python$(VERSION)-config); \
		rm -f $(DESTDIR)$(LIBPC)/python-$(LDVERSION).pc; \
		(cd $(DESTDIR)$(LIBPC); $(LN) -s python-$(VERSION).pc python-$(LDVERSION).pc); \
	fi
	-rm -f $(DESTDIR)$(BINDIR)/python3-config
	(cd $(DESTDIR)$(BINDIR); $(LN) -s python$(VERSION)-config python3-config)
	-rm -f $(DESTDIR)$(LIBPC)/python3.pc
	(cd $(DESTDIR)$(LIBPC); $(LN) -s python-$(VERSION).pc python3.pc)
	-rm -f $(DESTDIR)$(BINDIR)/idle3
	(cd $(DESTDIR)$(BINDIR); $(LN) -s idle$(VERSION) idle3)
	-rm -f $(DESTDIR)$(BINDIR)/pydoc3
	(cd $(DESTDIR)$(BINDIR); $(LN) -s pydoc$(VERSION) pydoc3)
	-rm -f $(DESTDIR)$(BINDIR)/2to3
	(cd $(DESTDIR)$(BINDIR); $(LN) -s 2to3-$(VERSION) 2to3)
	-rm -f $(DESTDIR)$(BINDIR)/pyvenv
	(cd $(DESTDIR)$(BINDIR); $(LN) -s pyvenv-$(VERSION) pyvenv)
	if test "x$(LIPO_32BIT_FLAGS)" != "x" ; then \
		rm -f $(DESTDIR)$(BINDIR)/python3-32$(EXE); \
		(cd $(DESTDIR)$(BINDIR); $(LN) -s python$(VERSION)-32$(EXE) python3-32$(EXE)) \
	fi

# Install the versioned manual page
altmaninstall:
	@for i in $(MANDIR) $(MANDIR)/man1; \
	do \
		if test ! -d $(DESTDIR)$$i; then \
			echo "Creating directory $$i"; \
			$(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \
		else	true; \
		fi; \
	done
	$(INSTALL_DATA) $(srcdir)/Misc/python.man \
		$(DESTDIR)$(MANDIR)/man1/python$(VERSION).1

# Install the unversioned manual page
maninstall:	altmaninstall
	-rm -f $(DESTDIR)$(MANDIR)/man1/python3.1
	(cd $(DESTDIR)$(MANDIR)/man1; $(LN) -s python$(VERSION).1 python3.1)

# Install the library
PLATDIR=	plat-$(MACHDEP)
EXTRAPLATDIR= @EXTRAPLATDIR@
MACHDEPS=	$(PLATDIR) $(EXTRAPLATDIR)
XMLLIBSUBDIRS=  xml xml/dom xml/etree xml/parsers xml/sax
LIBSUBDIRS=	tkinter tkinter/test tkinter/test/test_tkinter \
		tkinter/test/test_ttk site-packages test \
		test/audiodata \
		test/capath test/data \
		test/cjkencodings test/decimaltestdata test/xmltestdata \
		test/imghdrdata \
		test/subprocessdata test/sndhdrdata test/support \
		test/tracedmodules test/encoded_modules \
		test/test_importlib/namespace_pkgs \
		test/test_importlib/namespace_pkgs/both_portions \
		test/test_importlib/namespace_pkgs/both_portions/foo \
		test/test_importlib/namespace_pkgs/not_a_namespace_pkg \
		test/test_importlib/namespace_pkgs/not_a_namespace_pkg/foo \
		test/test_importlib/namespace_pkgs/portion1 \
		test/test_importlib/namespace_pkgs/portion1/foo \
		test/test_importlib/namespace_pkgs/portion2 \
		test/test_importlib/namespace_pkgs/portion2/foo \
		test/test_importlib/namespace_pkgs/project1 \
		test/test_importlib/namespace_pkgs/project1/parent \
		test/test_importlib/namespace_pkgs/project1/parent/child \
		test/test_importlib/namespace_pkgs/project2 \
		test/test_importlib/namespace_pkgs/project2/parent \
		test/test_importlib/namespace_pkgs/project2/parent/child \
		test/test_importlib/namespace_pkgs/project3 \
		test/test_importlib/namespace_pkgs/project3/parent \
		test/test_importlib/namespace_pkgs/project3/parent/child \
                test/test_importlib/namespace_pkgs/module_and_namespace_package \
                test/test_importlib/namespace_pkgs/module_and_namespace_package/a_test \
		asyncio \
		test/test_asyncio \
		collections concurrent concurrent/futures encodings \
		email email/mime test/test_email test/test_email/data \
		ensurepip ensurepip/_bundled \
		html json test/test_json http dbm xmlrpc \
		sqlite3 sqlite3/test \
		logging csv wsgiref urllib \
		lib2to3 lib2to3/fixes lib2to3/pgen2 lib2to3/tests \
		lib2to3/tests/data lib2to3/tests/data/fixers \
		lib2to3/tests/data/fixers/myfixes \
		ctypes ctypes/test ctypes/macholib \
		idlelib idlelib/Icons idlelib/idle_test \
		distutils distutils/command distutils/tests $(XMLLIBSUBDIRS) \
		importlib test/test_importlib test/test_importlib/builtin \
		test/test_importlib/extension test/test_importlib/frozen \
		test/test_importlib/import_ test/test_importlib/source \
		turtledemo \
		multiprocessing multiprocessing/dummy \
		unittest unittest/test unittest/test/testmock \
		venv venv/scripts venv/scripts/posix \
		curses pydoc_data $(MACHDEPS)
libinstall:	build_all $(srcdir)/Lib/$(PLATDIR) $(srcdir)/Modules/xxmodule.c
	@for i in $(SCRIPTDIR) $(LIBDEST); \
	do \
		if test ! -d $(DESTDIR)$$i; then \
			echo "Creating directory $$i"; \
			$(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \
		else	true; \
		fi; \
	done
	@for d in $(LIBSUBDIRS); \
	do \
		a=$(srcdir)/Lib/$$d; \
		if test ! -d $$a; then continue; else true; fi; \
		b=$(LIBDEST)/$$d; \
		if test ! -d $(DESTDIR)$$b; then \
			echo "Creating directory $$b"; \
			$(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$b; \
		else	true; \
		fi; \
	done
	@for i in $(srcdir)/Lib/*.py `cat pybuilddir.txt`/_sysconfigdata.py; \
	do \
		if test -x $$i; then \
			$(INSTALL_SCRIPT) $$i $(DESTDIR)$(LIBDEST); \
			echo $(INSTALL_SCRIPT) $$i $(LIBDEST); \
		else \
			$(INSTALL_DATA) $$i $(DESTDIR)$(LIBDEST); \
			echo $(INSTALL_DATA) $$i $(LIBDEST); \
		fi; \
	done
	@for d in $(LIBSUBDIRS); \
	do \
		a=$(srcdir)/Lib/$$d; \
		if test ! -d $$a; then continue; else true; fi; \
		if test `ls $$a | wc -l` -lt 1; then continue; fi; \
		b=$(LIBDEST)/$$d; \
		for i in $$a/*; \
		do \
			case $$i in \
			*CVS) ;; \
			*.py[co]) ;; \
			*.orig) ;; \
			*~) ;; \
			*) \
				if test -d $$i; then continue; fi; \
				if test -x $$i; then \
				    echo $(INSTALL_SCRIPT) $$i $$b; \
				    $(INSTALL_SCRIPT) $$i $(DESTDIR)$$b; \
				else \
				    echo $(INSTALL_DATA) $$i $$b; \
				    $(INSTALL_DATA) $$i $(DESTDIR)$$b; \
				fi;; \
			esac; \
		done; \
	done
	$(INSTALL_DATA) $(srcdir)/LICENSE $(DESTDIR)$(LIBDEST)/LICENSE.txt
	if test -d $(DESTDIR)$(LIBDEST)/distutils/tests; then \
		$(INSTALL_DATA) $(srcdir)/Modules/xxmodule.c \
			$(DESTDIR)$(LIBDEST)/distutils/tests ; \
	fi
	-PYTHONPATH=$(DESTDIR)$(LIBDEST)  $(RUNSHARED) \
		$(PYTHON_FOR_BUILD) -Wi $(DESTDIR)$(LIBDEST)/compileall.py \
		-d $(LIBDEST) -f \
		-x 'bad_coding|badsyntax|site-packages|lib2to3/tests/data' \
		$(DESTDIR)$(LIBDEST)
	-PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \
		$(PYTHON_FOR_BUILD) -Wi -O $(DESTDIR)$(LIBDEST)/compileall.py \
		-d $(LIBDEST) -f \
		-x 'bad_coding|badsyntax|site-packages|lib2to3/tests/data' \
		$(DESTDIR)$(LIBDEST)
	-PYTHONPATH=$(DESTDIR)$(LIBDEST)  $(RUNSHARED) \
		$(PYTHON_FOR_BUILD) -Wi $(DESTDIR)$(LIBDEST)/compileall.py \
		-d $(LIBDEST)/site-packages -f \
		-x badsyntax $(DESTDIR)$(LIBDEST)/site-packages
	-PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \
		$(PYTHON_FOR_BUILD) -Wi -O $(DESTDIR)$(LIBDEST)/compileall.py \
		-d $(LIBDEST)/site-packages -f \
		-x badsyntax $(DESTDIR)$(LIBDEST)/site-packages
	-PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \
		$(PYTHON_FOR_BUILD) -m lib2to3.pgen2.driver $(DESTDIR)$(LIBDEST)/lib2to3/Grammar.txt
	-PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \
		$(PYTHON_FOR_BUILD) -m lib2to3.pgen2.driver $(DESTDIR)$(LIBDEST)/lib2to3/PatternGrammar.txt

# Create the PLATDIR source directory, if one wasn't distributed..
$(srcdir)/Lib/$(PLATDIR):
	mkdir $(srcdir)/Lib/$(PLATDIR)
	cp $(srcdir)/Lib/plat-generic/regen $(srcdir)/Lib/$(PLATDIR)/regen
	export PATH; PATH="`pwd`:$$PATH"; \
	export PYTHONPATH; PYTHONPATH="`pwd`/Lib"; \
	export DYLD_FRAMEWORK_PATH; DYLD_FRAMEWORK_PATH="`pwd`"; \
	export EXE; EXE="$(BUILDEXE)"; \
	if [ -n "$(MULTIARCH)" ]; then export MULTIARCH; MULTIARCH=$(MULTIARCH); fi; \
	export PYTHON_FOR_BUILD; \
	if [ "$(BUILD_GNU_TYPE)" = "$(HOST_GNU_TYPE)" ]; then \
	  PYTHON_FOR_BUILD="$(BUILDPYTHON)"; \
	else \
	  PYTHON_FOR_BUILD="$(PYTHON_FOR_BUILD)"; \
	fi; \
	cd $(srcdir)/Lib/$(PLATDIR); $(RUNSHARED) ./regen

python-config: $(srcdir)/Misc/python-config.in Misc/python-config.sh
	# Substitution happens here, as the completely-expanded BINDIR
	# is not available in configure
	sed -e "s,@EXENAME@,$(BINDIR)/python$(LDVERSION)$(EXE)," < $(srcdir)/Misc/python-config.in >python-config.py
	# Replace makefile compat. variable references with shell script compat. ones; $(VAR) -> ${VAR}
	sed -e 's,\$$(\([A-Za-z0-9_]*\)),\$$\{\1\},g' < Misc/python-config.sh >python-config
	# On Darwin, always use the python version of the script, the shell
	# version doesn't use the compiler customizations that are provided
	# in python (_osx_support.py).
	if test `uname -s` = Darwin; then \
		cp python-config.py python-config; \
	fi


# Install the include files
INCLDIRSTOMAKE=$(INCLUDEDIR) $(CONFINCLUDEDIR) $(INCLUDEPY) $(CONFINCLUDEPY)
inclinstall:
	@for i in $(INCLDIRSTOMAKE); \
	do \
		if test ! -d $(DESTDIR)$$i; then \
			echo "Creating directory $$i"; \
			$(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \
		else	true; \
		fi; \
	done
	@for i in $(srcdir)/Include/*.h; \
	do \
		echo $(INSTALL_DATA) $$i $(INCLUDEPY); \
		$(INSTALL_DATA) $$i $(DESTDIR)$(INCLUDEPY); \
	done
	$(INSTALL_DATA) pyconfig.h $(DESTDIR)$(CONFINCLUDEPY)/pyconfig.h

# Install the library and miscellaneous stuff needed for extending/embedding
# This goes into $(exec_prefix)
LIBPL=		$(LIBDEST)/config-$(LDVERSION)

# pkgconfig directory
LIBPC=		$(LIBDIR)/pkgconfig

libainstall:	all python-config
	@for i in $(LIBDIR) $(LIBPL) $(LIBPC); \
	do \
		if test ! -d $(DESTDIR)$$i; then \
			echo "Creating directory $$i"; \
			$(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \
		else	true; \
		fi; \
	done
	@if test -d $(LIBRARY); then :; else \
		if test "$(PYTHONFRAMEWORKDIR)" = no-framework; then \
			if test "$(SHLIB_SUFFIX)" = .dll; then \
				$(INSTALL_DATA) $(LDLIBRARY) $(DESTDIR)$(LIBPL) ; \
			else \
				$(INSTALL_DATA) $(LIBRARY) $(DESTDIR)$(LIBPL)/$(LIBRARY) ; \
				$(RANLIB) $(DESTDIR)$(LIBPL)/$(LIBRARY) ; \
			fi; \
		else \
			echo Skip install of $(LIBRARY) - use make frameworkinstall; \
		fi; \
	fi
	$(INSTALL_DATA) Modules/config.c $(DESTDIR)$(LIBPL)/config.c
	$(INSTALL_DATA) Modules/python.o $(DESTDIR)$(LIBPL)/python.o
	$(INSTALL_DATA) $(srcdir)/Modules/config.c.in $(DESTDIR)$(LIBPL)/config.c.in
	$(INSTALL_DATA) Makefile $(DESTDIR)$(LIBPL)/Makefile
	$(INSTALL_DATA) Modules/Setup $(DESTDIR)$(LIBPL)/Setup
	$(INSTALL_DATA) Modules/Setup.local $(DESTDIR)$(LIBPL)/Setup.local
	$(INSTALL_DATA) Modules/Setup.config $(DESTDIR)$(LIBPL)/Setup.config
	$(INSTALL_DATA) Misc/python.pc $(DESTDIR)$(LIBPC)/python-$(VERSION).pc
	$(INSTALL_SCRIPT) $(srcdir)/Modules/makesetup $(DESTDIR)$(LIBPL)/makesetup
	$(INSTALL_SCRIPT) $(srcdir)/install-sh $(DESTDIR)$(LIBPL)/install-sh
	$(INSTALL_SCRIPT) python-config.py $(DESTDIR)$(LIBPL)/python-config.py
	$(INSTALL_SCRIPT) python-config $(DESTDIR)$(BINDIR)/python$(LDVERSION)-config
	@if [ -s Modules/python.exp -a \
		"`echo $(MACHDEP) | sed 's/^\(...\).*/\1/'`" = "aix" ]; then \
		echo; echo "Installing support files for building shared extension modules on AIX:"; \
		$(INSTALL_DATA) Modules/python.exp		\
				$(DESTDIR)$(LIBPL)/python.exp;		\
		echo; echo "$(LIBPL)/python.exp";		\
		$(INSTALL_SCRIPT) $(srcdir)/Modules/makexp_aix	\
				$(DESTDIR)$(LIBPL)/makexp_aix;		\
		echo "$(LIBPL)/makexp_aix";			\
		$(INSTALL_SCRIPT) $(srcdir)/Modules/ld_so_aix	\
				$(DESTDIR)$(LIBPL)/ld_so_aix;		\
		echo "$(LIBPL)/ld_so_aix";			\
		echo; echo "See Misc/AIX-NOTES for details.";	\
	else true; \
	fi

# Install the dynamically loadable modules
# This goes into $(exec_prefix)
sharedinstall: sharedmods
	$(RUNSHARED) $(PYTHON_FOR_BUILD) $(srcdir)/setup.py install \
	   	--prefix=$(prefix) \
		--install-scripts=$(BINDIR) \
		--install-platlib=$(DESTSHARED) \
		--root=$(DESTDIR)/
	-rm $(DESTDIR)$(DESTSHARED)/_sysconfigdata.py
	-rm -r $(DESTDIR)$(DESTSHARED)/__pycache__

# Here are a couple of targets for MacOSX again, to install a full
# framework-based Python. frameworkinstall installs everything, the
# subtargets install specific parts. Much of the actual work is offloaded to
# the Makefile in Mac
#
#
# This target is here for backward compatiblity, previous versions of Python
# hadn't integrated framework installation in the normal install process.
frameworkinstall: install

# On install, we re-make the framework
# structure in the install location, /Library/Frameworks/ or the argument to
# --enable-framework. If --enable-framework has been specified then we have
# automatically set prefix to the location deep down in the framework, so we
# only have to cater for the structural bits of the framework.

frameworkinstallframework: frameworkinstallstructure install frameworkinstallmaclib

frameworkinstallstructure:	$(LDLIBRARY)
	@if test "$(PYTHONFRAMEWORKDIR)" = no-framework; then \
		echo Not configured with --enable-framework; \
		exit 1; \
	else true; \
	fi
	@for i in $(prefix)/Resources/English.lproj $(prefix)/lib; do\
		if test ! -d $(DESTDIR)$$i; then \
			echo "Creating directory $(DESTDIR)$$i"; \
			$(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \
		else	true; \
		fi; \
	done
	$(LN) -fsn include/python$(LDVERSION) $(DESTDIR)$(prefix)/Headers
	sed 's/%VERSION%/'"`$(RUNSHARED) ./$(BUILDPYTHON) -c 'import platform; print(platform.python_version())'`"'/g' < $(RESSRCDIR)/Info.plist > $(DESTDIR)$(prefix)/Resources/Info.plist
	$(LN) -fsn $(VERSION) $(DESTDIR)$(PYTHONFRAMEWORKINSTALLDIR)/Versions/Current
	$(LN) -fsn Versions/Current/$(PYTHONFRAMEWORK) $(DESTDIR)$(PYTHONFRAMEWORKINSTALLDIR)/$(PYTHONFRAMEWORK)
	$(LN) -fsn Versions/Current/Headers $(DESTDIR)$(PYTHONFRAMEWORKINSTALLDIR)/Headers
	$(LN) -fsn Versions/Current/Resources $(DESTDIR)$(PYTHONFRAMEWORKINSTALLDIR)/Resources
	$(INSTALL_SHARED) $(LDLIBRARY) $(DESTDIR)$(PYTHONFRAMEWORKPREFIX)/$(LDLIBRARY)

# This installs Mac/Lib into the framework
# Install a number of symlinks to keep software that expects a normal unix
# install (which includes python-config) happy.
frameworkinstallmaclib:
	$(LN) -fs "../../../$(PYTHONFRAMEWORK)" "$(DESTDIR)$(prefix)/lib/python$(VERSION)/config-$(LDVERSION)/libpython$(LDVERSION).a"
	$(LN) -fs "../../../$(PYTHONFRAMEWORK)" "$(DESTDIR)$(prefix)/lib/python$(VERSION)/config-$(LDVERSION)/libpython$(LDVERSION).dylib"
	$(LN) -fs "../../../$(PYTHONFRAMEWORK)" "$(DESTDIR)$(prefix)/lib/python$(VERSION)/config-$(LDVERSION)/libpython$(VERSION).a"
	$(LN) -fs "../../../$(PYTHONFRAMEWORK)" "$(DESTDIR)$(prefix)/lib/python$(VERSION)/config-$(LDVERSION)/libpython$(VERSION).dylib"
	$(LN) -fs "../$(PYTHONFRAMEWORK)" "$(DESTDIR)$(prefix)/lib/libpython$(LDVERSION).dylib"
	$(LN) -fs "../$(PYTHONFRAMEWORK)" "$(DESTDIR)$(prefix)/lib/libpython$(VERSION).dylib"

# This installs the IDE, the Launcher and other apps into /Applications
frameworkinstallapps:
	cd Mac && $(MAKE) installapps DESTDIR="$(DESTDIR)"

# Build the bootstrap executable that will spawn the interpreter inside
# an app bundle within the framework.  This allows the interpreter to
# run OS X GUI APIs.
frameworkpythonw:
	cd Mac && $(MAKE) pythonw

# This installs the python* and other bin symlinks in $prefix/bin or in
# a bin directory relative to the framework root
frameworkinstallunixtools:
	cd Mac && $(MAKE) installunixtools DESTDIR="$(DESTDIR)"

frameworkaltinstallunixtools:
	cd Mac && $(MAKE) altinstallunixtools DESTDIR="$(DESTDIR)"

# This installs the Tools into the applications directory.
# It is not part of a normal frameworkinstall
frameworkinstallextras:
	cd Mac && $(MAKE) installextras DESTDIR="$(DESTDIR)"

# This installs a few of the useful scripts in Tools/scripts
scriptsinstall:
	SRCDIR=$(srcdir) $(RUNSHARED) \
	$(PYTHON_FOR_BUILD) $(srcdir)/Tools/scripts/setup.py install \
	--prefix=$(prefix) \
	--install-scripts=$(BINDIR) \
	--root=$(DESTDIR)/

# Build the toplevel Makefile
Makefile.pre: $(srcdir)/Makefile.pre.in config.status
	CONFIG_FILES=Makefile.pre CONFIG_HEADERS= $(SHELL) config.status
	$(MAKE) -f Makefile.pre Makefile

# Run the configure script.
config.status:	$(srcdir)/configure
	$(SHELL) $(srcdir)/configure $(CONFIG_ARGS)

.PRECIOUS: config.status $(BUILDPYTHON) Makefile Makefile.pre

# Some make's put the object file in the current directory
.c.o:
	$(CC) -c $(PY_CORE_CFLAGS) -o $@ $<

# Run reindent on the library
reindent:
	./$(BUILDPYTHON) $(srcdir)/Tools/scripts/reindent.py -r $(srcdir)/Lib

# Rerun configure with the same options as it was run last time,
# provided the config.status script exists
recheck:
	$(SHELL) config.status --recheck
	$(SHELL) config.status

# Rebuild the configure script from configure.ac; also rebuild pyconfig.h.in
autoconf:
	(cd $(srcdir); autoconf -Wall)
	(cd $(srcdir); autoheader -Wall)

# Create a tags file for vi
tags::
	cd $(srcdir); \
	ctags -w -t Include/*.h; \
	for i in $(SRCDIRS); do ctags -w -t -a $$i/*.[ch]; \
	done; \
	sort -o tags tags

# Create a tags file for GNU Emacs
TAGS::
	cd $(srcdir); \
	etags Include/*.h; \
	for i in $(SRCDIRS); do etags -a $$i/*.[ch]; done

# This fixes up the mtimes of checked-in generated files, assuming that they
# only *appear* to be outdated because of checkout order.
# This is run while preparing a source release tarball, and can be run manually
# to avoid bootstrap issues.
touch:
	cd $(srcdir); \
	hg --config extensions.touch=Tools/hg/hgtouch.py touch -v

# Sanitation targets -- clean leaves libraries, executables and tags
# files, which clobber removes as well
pycremoval:
	-find $(srcdir) -depth -name '__pycache__' -exec rm -rf {} ';'
	-find $(srcdir) -name '*.py[co]' -exec rm -f {} ';'

rmtestturds:
	-rm -f *BAD *GOOD *SKIPPED
	-rm -rf OUT
	-rm -f *.TXT
	-rm -f *.txt
	-rm -f gb-18030-2000.xml

docclean:
	-rm -rf Doc/build
	-rm -rf Doc/tools/sphinx Doc/tools/pygments Doc/tools/docutils

clean: pycremoval
	find . -name '*.[oa]' -exec rm -f {} ';'
	find . -name '*.s[ol]' -exec rm -f {} ';'
	find . -name '*.so.[0-9]*.[0-9]*' -exec rm -f {} ';'
	find build -name 'fficonfig.h' -exec rm -f {} ';' || true
	find build -name '*.py' -exec rm -f {} ';' || true
	find build -name '*.py[co]' -exec rm -f {} ';' || true
	-rm -f pybuilddir.txt
	-rm -f Lib/lib2to3/*Grammar*.pickle
	-rm -f Modules/_testembed Modules/_freeze_importlib

profile-removal:
	find . -name '*.gc??' -exec rm -f {} ';'
	rm -f $(COVERAGE_INFO)
	rm -rf $(COVERAGE_REPORT)

clobber: clean profile-removal
	-rm -f $(BUILDPYTHON) $(PGEN) $(LIBRARY) $(LDLIBRARY) $(DLLLIBRARY) \
		tags TAGS \
		config.cache config.log pyconfig.h Modules/config.c
	-rm -rf build platform
	-rm -rf $(PYTHONFRAMEWORKDIR)
	-rm -f python-config.py python-config

# Make things extra clean, before making a distribution:
# remove all generated files, even Makefile[.pre]
# Keep configure and Python-ast.[ch], it's possible they can't be generated
distclean: clobber
	for file in $(srcdir)/Lib/test/data/* ; do \
	    if test "$$file" != "$(srcdir)/Lib/test/data/README"; then rm "$$file"; fi; \
	done
	-rm -f core Makefile Makefile.pre config.status \
		Modules/Setup Modules/Setup.local Modules/Setup.config \
		Modules/ld_so_aix Modules/python.exp Misc/python.pc
	-rm -f python*-gdb.py
	find $(srcdir)/[a-zA-Z]* '(' -name '*.fdc' -o -name '*~' \
				     -o -name '[@,#]*' -o -name '*.old' \
				     -o -name '*.orig' -o -name '*.rej' \
				     -o -name '*.bak' ')' \
				     -exec rm -f {} ';'

# Check for smelly exported symbols (not starting with Py/_Py)
smelly: all
	nm -p $(LIBRARY) | \
		sed -n "/ [TDB] /s/.* //p" | grep -v "^_*Py" | sort -u; \

# Find files with funny names
funny:
	find $(SUBDIRS) $(SUBDIRSTOO) \
		-type d \
		-o -name '*.[chs]' \
		-o -name '*.py' \
		-o -name '*.pyw' \
		-o -name '*.dat' \
		-o -name '*.el' \
		-o -name '*.fd' \
		-o -name '*.in' \
		-o -name '*.gif' \
		-o -name '*.txt' \
		-o -name '*.xml' \
		-o -name '*.xbm' \
		-o -name '*.xpm' \
		-o -name '*.uue' \
		-o -name '*.decTest' \
		-o -name '*.tmCommand' \
		-o -name '*.tmSnippet' \
		-o -name 'Setup' \
		-o -name 'Setup.*' \
		-o -name regen \
		-o -name README \
		-o -name NEWS \
		-o -name HISTORY \
		-o -name Makefile \
		-o -name ChangeLog \
		-o -name .hgignore \
		-o -name .bzrignore \
		-o -name MANIFEST \
		-o -print

# Perform some verification checks on any modified files.
patchcheck:
	$(RUNSHARED) ./$(BUILDPYTHON) $(srcdir)/Tools/scripts/patchcheck.py

# Dependencies

Python/thread.o: @THREADHEADERS@

# Declare targets that aren't real files
.PHONY: all build_all sharedmods oldsharedmods test quicktest
.PHONY: install altinstall oldsharedinstall bininstall altbininstall
.PHONY: maninstall libinstall inclinstall libainstall sharedinstall
.PHONY: frameworkinstall frameworkinstallframework frameworkinstallstructure
.PHONY: frameworkinstallmaclib frameworkinstallapps frameworkinstallunixtools
.PHONY: frameworkaltinstallunixtools recheck autoconf clean clobber distclean
.PHONY: smelly funny patchcheck touch altmaninstall commoninstall
.PHONY: gdbhooks

# IF YOU PUT ANYTHING HERE IT WILL GO AWAY
# Local Variables:
# mode: makefile
# End: