blob: 800610e53e35c90dc73b12f6fa489e87a575fee1 [file] [log] [blame]
#####################==================----------------
#
# Top-Level Makefile for Building Python 2.6 for OS/2 using GCC/EMX
# Originally written by Andrew Zabolotny, <bit@eltech.ru> for Python 1.5.2
# Modified by Andrew MacIntyre, <andymac@pcug.org.au> for Python 2.6
#
# This makefile was developed for use with [P]GCC/EMX compiler any
# version and GNU Make.
#
# The output of the build is a largish Python26.DLL containing the
# essential modules of Python and a small Python.exe program to start
# the interpreter. When embedding Python within another program, only
# Python26.DLL is needed. We also build python_s.a static library (which
# can be converted into OMF (.lib) format using emxomf tool) and both
# python.a and python.lib import libraries. Then the optional
# extension modules, which are OS/2 DLLs renamed with a PYD file extension.
#
# Recommended build order:
# make depend (if you have makedep)
# make all
# make lx (if you have lxlite)
# make test (optional)
#
#####################==================----------------
# === Compilation mode: debug or release ===
MODE= optimize
#MODE= debug
# === Assert() enabled ===
ASSERTIONS=no
#ASSERTIONS=yes
# === Hard-wire installation location ===
FIXED_PYHOME=no
#FIXED_PYHOME=yes
# === Optional modules ===
# Do you have the InfoZip compression library installed?
HAVE_ZLIB= no
# Do you have the Ultra Fast Crypt (UFC) library installed?
HAVE_UFC= no
# Do you have the Tcl/Tk library installed?
HAVE_TCLTK= no
# Do you have the GNU readline library installed?
# NOTE: I'm using a modified version of Kai Uwe Rommel's port that
# - is compiled with multithreading enabled
# - is linked statically
# I have had no success trying to use a DLL version, even when
# compiled with multithreading enabled.
HAVE_GREADLINE= no
# Do you have the BSD DB library (v1.85) as included in the EMXBSD package?
# NOTE: this library needs to be recompiled with a structure member
# renamed to avoid problems with the multithreaded errno support
# (there is a structure member called errno, used for shadowing the
# real errno, which conflicts with the errno redefinition of -Zmt)
HAVE_BSDDB= no
# Do you have the ncurses library installed? EMX's BSD curses aren't enough!
HAVE_NCURSES= no
# Do you have the GDBM library installed?
HAVE_GDBM= no
# Do you have the BZ2 compression library installed?
HAVE_BZ2= no
# Do you have the OpenSSL libraries installed
HAVE_OPENSSL= no
# === install locations ===
# default value of PYTHONHOME
LIB_DIR=C:/Python26
# default is to have everything in or under PYTHONHOME
EXE_DIR=$(LIB_DIR)
DLL_DIR=$(EXE_DIR)
# === The Tools ===
CC= gcc
CFLAGS= -Zmt -Wall $(INCLUDE)
CFLAGS.LIB= $(CFLAGS)
LD= gcc
LDFLAGS= -Zmt -Zcrtdll -L. -lgcc
LDFLAGS.EXE= $(LDFLAGS)
LDFLAGS.DLL= $(LDFLAGS) -Zdll
LDFLAGS.A= $(LDFLAGS) $(LIBS)
ARFLAGS= crs
IMPLIB= emximp
EXPLIB= emxexp
EXEOPT= emxbind
PY_DEF= -DPy_BUILD_CORE
# adjust C compiler settings based on build options
ifeq ($(MODE),debug)
CFLAGS+= -g -O
LDFLAGS+= -g
else
CFLAGS+= -s -O3 -fomit-frame-pointer -mprobe
LDFLAGS+= -s
endif
CFLAGS+= $(PY_DEF)
ifeq ($(ASSERTIONS),no)
CFLAGS+= -DNDEBUG
endif
ifeq ($(FIXED_PYHOME),yes)
CFLAGS+= -DPREFIX=$(DQUOTE)$(LIB_DIR)$(DQUOTE)
endif
# We're using the OMF format since EMX's ld has a obscure bug
# because of which it sometimes fails to build relocations
# in .data segment that point to another .data locations
# (except for the final linking if the .EXEs)
OMF= yes
# if fork() support is required, the main executable must be linked with ld
EXEOMF= no
# File extensions
MODULE.EXT= .pyd
MODLIB.EXT= .dll
ifeq ($(OMF),yes)
O= .obj
A= .lib
AR= emxomfar
CFLAGS+= -Zomf
LDFLAGS+= -Zomf
ifeq ($(MODE),debug)
ARFLAGS= -p64 crs
else
ARFLAGS= -p32 crs
endif
else
O= .o
A= .a
AR= ar
endif
# === Build time resource settings ===
# EMX's default number of file handles is 40, which is sometimes insufficient
# (the tempfile regression test tries to create 100 temporary files)
NFILES=250
# The default stack size for child threads is 64k bytes, which is
# insufficient for some applications which do a lot of work in threads
# (such as Zope, especially in conjunction with Plone).
# Note that this setting is distinct from the stack size for the main
# thread, which is set via the %.def rule below.
# EMX documents that the thread stack size should be at least 32768 bytes;
# for Zope/Plone at least 128k bytes is recommended.
# Uncomment & adjust the next line to override the default stack size:
#CFLAGS+= -DTHREAD_STACK_SIZE=0x20000
# === The environment ===
# Source file paths
SRCPATH=.;../../Python;../../Parser;../../Objects;../../Include;../../Modules
# Python contains the central core, containing the builtins and interpreter.
# Parser contains Python's Internal Parser and
# Standalone Parser Generator Program (Shares Some of Python's Modules)
# Objects contains Python Object Types
# Modules contains extension Modules (Built-In or as Separate DLLs)
# Unix shells tend to use "$" as delimiter for variable names.
# Test for this behaviour and set $(BUCK) variable correspondigly ...
__TMP__:=$(shell echo $$$$)
ifeq ($(__TMP__),$$$$)
BUCK= $$
BRO= (
BRC= )
else
BUCK= \$$
BRO= \(
BRC= \)
endif
# Compute the "double quote" variable
__TMP__:=$(shell echo "")
ifeq ($(__TMP__),"")
DQUOTE= "
else
DQUOTE= \"
endif
# Include paths
#INCLUDE= -I$(subst ;, -I, $(SRCPATH))
INCLUDE= -I. -I../../Include
# Path to search for .c files
vpath %.c .;..;$(SRCPATH)
# Top of the package tree
TOP= ../../
# Directory for output files
OUTBASE= out/
OUT= $(OUTBASE)$(MODE)/
# Additional libraries
LIBS= -lsocket
# Utility macro: replacement for $^
^^= $(filter-out %$A,$^)
# Use $(L^) to link with all libraries specified as dependencies
L^= $(addprefix -l,$(basename $(notdir $(filter %$A,$+))))
# Build rules
$(OUT)%$O: %.c
$(CC) $(CFLAGS.LIB) -c $< -o $@
%.a:
$(LD) $(LDFLAGS.A) -o $@ $(^^) $(L^)
%.dll:
$(LD) $(LDFLAGS.DLL) -o $@ $(^^) $(L^) $(LIBS)
%.pyd: $(OUT)%module$O $(OUT)%_m.def
$(LD) $(LDFLAGS.DLL) -o $@ $(^^) $(PYTHON.IMPLIB) $(LIBS)
%.exe:
$(LD) $(LDFLAGS.EXE) -o $@ $(^^) $(L^)
%_m.def:
@echo Creating .DEF file: $@
@echo LIBRARY $(notdir $*) INITINSTANCE TERMINSTANCE >$@
ifeq ($(DESCRIPTION.$(notdir $*)$(MODULE.EXT)),)
@echo DESCRIPTION $(DQUOTE)Python standard module $(notdir $*)$(DQUOTE) >>$@
else
@echo DESCRIPTION $(DQUOTE)$(DESCRIPTION.$(notdir $*)$(MODULE.EXT))$(DQUOTE) >>$@
endif
@echo DATA MULTIPLE NONSHARED >>$@
@echo EXPORTS >>$@
@echo init$(notdir $*) >>$@
%.def:
@echo Creating .DEF file: $@
@echo NAME $(notdir $*) $(EXETYPE.$(notdir $*).exe) >$@
@echo DESCRIPTION $(DQUOTE)$(DESCRIPTION.$(notdir $*).exe)$(DQUOTE) >>$@
@echo STACKSIZE 2097152 >>$@
# Output file names
PYTHON_VER= 2.6
PYTHON_LIB= python33
PYTHON.LIB= $(PYTHON_LIB)_s$A
PYTHON.IMPLIB= $(PYTHON_LIB)$A
ifeq ($(EXEOMF),yes)
PYTHON.EXEIMP= $(PYTHON.IMPLIB)
LDMODE.EXE= -Zomf
else
PYTHON.EXEIMP= $(PYTHON_LIB).a
LDMODE.EXE =
endif
PYTHON.DLL= $(PYTHON_LIB).dll
PYTHON.DEF= $(PYTHON_LIB).def
PYTHON.EXE= python.exe
PYTHONPM.EXE= pythonpm.exe
PGEN.EXE= pgen.exe
LIBRARY= $(PYTHON.LIB)
LD_LIBRARY= $(PYTHON.IMPLIB)
# Additional executable parameters
EXETYPE.$(PYTHON.EXE)= WINDOWCOMPAT
EXETYPE.$(PYTHONPM.EXE)= WINDOWAPI
EXETYPE.$(PGEN.EXE)= WINDOWCOMPAT
DESCRIPTION.$(PYTHON.EXE)= Python object-oriented programming language interpreter for OS/2
DESCRIPTION.$(PYTHONPM.EXE)= $(DESCRIPTION.$(PYTHON.EXE))
DESCRIPTION.$(PGEN.EXE)= Python object-oriented programming language parser generator for OS/2
# Module descriptions
DESCRIPTION.zlib$(MODULE.EXT)= Python Extension DLL for accessing the InfoZip compression library
DESCRIPTION.crypt$(MODULE.EXT)= Python Extension DLL implementing the crypt$(BRO)$(BRC) function
DESCRIPTION._tkinter$(MODULE.EXT)= Python Extension DLL for access to Tcl/Tk Environment
DESCRIPTION.readline$(MODULE.EXT)= Python Extension DLL for access to GNU ReadLine library
DESCRIPTION._curses$(MODLIB.EXT)= Python Extension DLL for access to ncurses library
DESCRIPTION.pyexpat$(MODULE.EXT)= Python Extension DLL for access to expat library
DESCRIPTION.bz2$(MODULE.EXT)= Python Extension DLL for accessing the bz2 compression library
# Source files
SRC.OS2EMX= config.c dlfcn.c getpathp.c
SRC.MAIN= $(addprefix $(TOP), \
Modules/getbuildinfo.c \
Modules/main.c)
SRC.MODULES= $(addprefix $(TOP), \
Modules/gcmodule.c \
Modules/signalmodule.c \
Modules/posixmodule.c \
Modules/_threadmodule.c \
Modules/arraymodule.c \
Modules/binascii.c \
Modules/cmathmodule.c \
Modules/_codecsmodule.c \
Modules/collectionsmodule.c \
Modules/_csv.c \
Modules/datetimemodule.c \
Modules/errnomodule.c \
Modules/fcntlmodule.c \
Modules/_functoolsmodule.c \
Modules/_heapqmodule.c \
Modules/imageop.c \
Modules/itertoolsmodule.c \
Modules/_localemodule.c \
Modules/mathmodule.c \
Modules/operator.c \
Modules/_randommodule.c \
Modules/sha256module.c \
Modules/sha512module.c \
Modules/_sre.c \
Modules/_struct.c \
Modules/symtablemodule.c \
Modules/termios.c \
Modules/timemodule.c \
Modules/_weakref.c \
Modules/xxsubtype.c \
Modules/zipimport.c)
SRC.PARSE1= $(addprefix $(TOP), \
Parser/acceler.c \
Parser/grammar1.c \
Parser/listnode.c \
Parser/node.c \
Parser/parser.c \
Parser/parsetok.c \
Parser/bitset.c \
Parser/metagrammar.c)
SRC.PARSE2= $(addprefix $(TOP), \
Parser/tokenizer.c \
Parser/myreadline.c)
SRC.PARSER= $(SRC.PARSE1) \
$(SRC.PARSE2)
SRC.PYTHON= $(addprefix $(TOP), \
Python/Python-ast.c \
Python/asdl.c \
Python/ast.c \
Python/bltinmodule.c \
Python/exceptions.c \
Python/ceval.c \
Python/compile.c \
Python/codecs.c \
Python/dynamic_annotations.c \
Python/errors.c \
Python/frozen.c \
Python/frozenmain.c \
Python/future.c \
Python/getargs.c \
Python/getcompiler.c \
Python/getcopyright.c \
Python/getplatform.c \
Python/getversion.c \
Python/graminit.c \
Python/import.c \
Python/importdl.c \
Python/marshal.c \
Python/modsupport.c \
Python/mysnprintf.c \
Python/mystrtoul.c \
Python/pyarena.c \
Python/pyctype.c \
Python/pyfpe.c \
Python/pystate.c \
Python/pystrtod.c \
Python/pythonrun.c \
Python/structmember.c \
Python/symtable.c \
Python/sysmodule.c \
Python/traceback.c \
Python/getopt.c \
Python/dynload_shlib.c \
Python/thread.c)
SRC.OBJECT= $(addprefix $(TOP), \
Objects/abstract.c \
Objects/boolobject.c \
Objects/cellobject.c \
Objects/classobject.c \
Objects/cobject.c \
Objects/codeobject.c \
Objects/complexobject.c \
Objects/descrobject.c \
Objects/dictobject.c \
Objects/enumobject.c \
Objects/fileobject.c \
Objects/floatobject.c \
Objects/frameobject.c \
Objects/funcobject.c \
Objects/genobject.c \
Objects/iterobject.c \
Objects/listobject.c \
Objects/longobject.c \
Objects/methodobject.c \
Objects/moduleobject.c \
Objects/object.c \
Objects/obmalloc.c \
Objects/rangeobject.c \
Objects/setobject.c \
Objects/sliceobject.c \
Objects/stringobject.c \
Objects/structseq.c \
Objects/tupleobject.c \
Objects/typeobject.c \
Objects/unicodeobject.c \
Objects/unicodectype.c \
Objects/weakrefobject.c)
SRC.LIB= $(SRC.OS2EMX) \
$(SRC.MAIN) \
$(SRC.PARSER) \
$(SRC.OBJECT) \
$(SRC.PYTHON) \
$(SRC.MODULES)
OBJ.LIB= $(addprefix $(OUT),$(notdir $(SRC.LIB:.c=$O)))
SRC.PGEN= $(SRC.PARSE1) \
$(addprefix $(TOP), \
Objects/obmalloc.c) \
$(addprefix $(TOP), \
Python/mysnprintf.c) \
$(addprefix $(TOP), \
Parser/tokenizer_pgen.c \
Parser/pgenmain.c \
Parser/pgen.c \
Parser/printgrammar.c \
Parser/grammar.c \
Parser/firstsets.c) \
OBJ.PGEN= $(addprefix $(OUT),$(notdir $(SRC.PGEN:.c=$O)))
SRC.EXE= $(TOP)Modules/python.c
SRC.PMEXE= pythonpm.c
# Python modules to be dynamically loaded that:
# 1) have only single source file and require no extra libs
# 2) use the standard module naming convention
# (the 'module' in ?????module.c is assumed)
# - these can be built with implicit rules
EASYEXTMODULES= fpectl \
fpetest \
parser \
pwd \
select
# Python modules to be dynamically loaded that need explicit build rules
# (either multiple source files and/or non-standard module naming)
# (NOTE: use shortened names for modules affected by 8 char name limit)
HARDEXTMODULES= _socket \
_testcap \
unicoded
# Python modules that are used as libraries and therefore must use
# a .DLL extension
LIBEXTMODULES=
# Python external ($(MODULE.EXT)) modules - can be EASY or HARD
ifeq ($(HAVE_ZLIB),yes)
HARDEXTMODULES+= zlib
endif
ifeq ($(HAVE_UFC),yes)
HARDEXTMODULES+= crypt
endif
ifeq ($(HAVE_TCLTK),yes)
HARDEXTMODULES+= _tkinter
CFLAGS+= -DHAS_DIRENT -I/TclTk80/include
TK_LIBS+= -L/TclTk80/lib -ltcl80 -ltk80
endif
ifeq ($(HAVE_GREADLINE),yes)
HARDEXTMODULES+= readline
endif
ifeq ($(HAVE_NCURSES),yes)
LIBEXTMODULES+= _curses
HARDEXTMODULES+= _curses_
endif
ifeq ($(HAVE_GDBM),yes)
HARDEXTMODULES+= _gdbm _dbm
endif
ifeq ($(HAVE_BZ2),yes)
HARDEXTMODULES+= bz2
endif
ifeq ($(HAVE_OPENSSL),yes)
HARDEXTMODULES+= _ssl
endif
# Expat is now distributed with the Python source
HARDEXTMODULES+= pyexpat
EXPAT.INC= -I../../Modules/expat
EXPAT.DEF= -DHAVE_EXPAT_H -DXML_NS=1 -DXML_DTD=1 -DXML_BYTE_ORDER=12 \
-DXML_CONTENT_BYTES=1024 -DHAVE_MEMMOVE=1 -DHAVE_BCOPY=1
EXPAT.SRC= $(addprefix ../../Modules/expat/, \
xmlparse.c \
xmlrole.c \
xmltok.c)
# all the external modules
EXTERNDLLS= $(addsuffix $(MODULE.EXT),$(patsubst %module,%,$(EASYEXTMODULES)))
EXTERNDLLS+= $(addsuffix $(MODULE.EXT),$(patsubst %module,%,$(HARDEXTMODULES)))
EXTERNDLLS+= $(addsuffix $(MODLIB.EXT),$(patsubst %module,%,$(LIBEXTMODULES)))
# Targets
all: $(OUT) $(PYTHON.LIB) $(PYTHON.DEF) $(PYTHON.IMPLIB) $(PYTHON.DLL) \
python_noncore
python_noncore:
make PY_DEF= $(PYTHON.EXE) $(PYTHONPM.EXE) $(PGEN.EXE) $(EXTERNDLLS)
clean:
rm -f $(OUT)*
rm -f $(PYTHON.LIB) $(PYTHON.IMPLIB) $(PYTHON.EXEIMP) $(PYTHON.DLL) \
$(PYTHON.EXE) $(PYTHONPM.EXE) $(PGEN.EXE) *$(MODULE.EXT) *.dll
find ../../Lib -name "*.py[co]" -exec rm {} ";"
lx:
@echo Packing everything with lxLite...
lxlite $(PYTHON.DLL) $(PYTHON.EXE) $(PYTHONPM.EXE) $(PGEN.EXE)
depend: $(OUTBASE)
makedep -f $(OUTBASE)python.dep -o $(BUCK)O -p $(BUCK)\(OUT\) \
-r -c $(INCLUDE) $(SRC.LIB) $(SRC.PGEN)
$(OUT): $(OUTBASE)
$(OUT) $(OUTBASE):
mkdir.exe $@
$(PYTHON.LIB): $(OBJ.LIB)
rm.exe -f $@
$(AR) $(ARFLAGS) $@ $^
# the Python core DLL .def file needs to have a number of non-static
# symbols that aren't part of the Python C API removed (commented out)
# from the DLL export list.
$(PYTHON.DEF): $(PYTHON.LIB)
@echo Creating .DEF file: $@
@echo LIBRARY $(PYTHON_LIB) INITINSTANCE TERMINSTANCE >$@
@echo DESCRIPTION $(DQUOTE)Python $(PYTHON_VER) Core DLL$(DQUOTE) >>$@
@echo PROTMODE >>$@
@echo DATA MULTIPLE NONSHARED >>$@
@echo EXPORTS >>$@
$(EXPLIB) -u $(PYTHON.LIB) |\
sed -e "/^ .init.*/s/^ /; /" \
-e "/^ .pcre_.*/s/^ /; /" \
-e "/^ .array_methods/s/^ /; /" \
-e "/^ .fast_save_leave/s/^ /; /" \
-e "/^ .dlopen/s/^ /; /" \
-e "/^ .dlsym/s/^ /; /" \
-e "/^ .dlclose/s/^ /; /" \
-e "/^ .dlerror/s/^ /; /" \
-e "/^ ._Py_re_.*/s/^ /; /" \
-e "/^ ._Py_MD5.*/s/^ /; /" >>$@
$(PYTHON.IMPLIB): $(PYTHON.DEF)
$(IMPLIB) -o $@ $^
$(PYTHON.EXEIMP): $(PYTHON.DEF)
$(IMPLIB) -o $@ $^
$(PYTHON.DLL): $(OUT)dllentry$O $(PYTHON.LIB) $(PYTHON.DEF)
# Explicit make targets for the .EXEs to be able to use LD to link
# (so that fork() will work if required)
$(PYTHON.EXE): $(SRC.EXE) $(PYTHON.EXEIMP) $(OUT)python.def
$(CC) -Zmt $(LDMODE.EXE) -Zcrtdll -Wall $(INCLUDE) -L. -lgcc -o $@ $(SRC.EXE) $(PYTHON.EXEIMP) $(LIBS) $(OUT)python.def
$(EXEOPT) -aq $(PYTHON.EXE) -h$(NFILES)
$(PYTHONPM.EXE): $(SRC.PMEXE) $(PYTHON.EXEIMP) $(OUT)pythonpm.def
$(CC) -Zmt $(LDMODE.EXE) -Zcrtdll -Wall $(INCLUDE) -L. -lgcc -o $@ $(SRC.PMEXE) $(PYTHON.EXEIMP) $(LIBS) $(OUT)pythonpm.def
$(EXEOPT) -aq $(PYTHONPM.EXE) -h$(NFILES)
$(PGEN.EXE): $(OBJ.PGEN) $(OUT)pgen.def
# Explicit building instructions for those external modules that require
# awkward handling (due e.g. to non-std naming, or multiple source files)
# - standard modules
_socket$(MODULE.EXT): $(OUT)socketmodule$O $(OUT)_socket_m.def $(PYTHON.IMPLIB)
$(LD) $(LDFLAGS.DLL) -o $@ $(^^) $(L^) $(LIBS)
# _testcapi needs to be renamed to be useful
_testcapi$(MODULE.EXT): $(OUT)_testcapimodule$O $(OUT)_testcapi_m.def $(PYTHON.IMPLIB)
$(LD) $(LDFLAGS.DLL) -o $@ $(^^) $(L^) $(LIBS)
_testcap$(MODULE.EXT): _testcapi$(MODULE.EXT)
cp $^ $@
# unicodedata needs to be renamed to be useful
unicodedata$(MODULE.EXT): $(OUT)unicodedata$O $(OUT)unicodedata_m.def $(PYTHON.IMPLIB)
$(LD) $(LDFLAGS.DLL) -o $@ $(^^) $(L^) $(LIBS) $(MODULE_LIBS)
unicoded$(MODULE.EXT): unicodedata$(MODULE.EXT)
cp $^ $@
crypt$(MODULE.EXT): $(OUT)cryptmodule$O $(OUT)crypt_m.def $(PYTHON.IMPLIB)
$(LD) $(LDFLAGS.DLL) -o $@ $(^^) $(L^) -lufc $(LIBS)
# The _curses_panel module requires a couple of ncurses library entry
# points, which are best exposed as exports from the _curses module DLL
$(OUT)_curses_m.def:
@echo Creating .DEF file: $@
@echo LIBRARY $(notdir $*) INITINSTANCE TERMINSTANCE >$@
@echo DESCRIPTION $(DQUOTE)$(DESCRIPTION.$(notdir $*)$(MODLIB.EXT))$(DQUOTE) >>$@
@echo DATA MULTIPLE NONSHARED >>$@
@echo EXPORTS >>$@
@echo init_curses >>$@
@echo wnoutrefresh >>$@
@echo _nc_panelhook >>$@
@echo is_linetouched >>$@
@echo mvwin >>$@
@echo stdscr >>$@
@echo wtouchln >>$@
$(OUT)_curses_panel_m.def:
@echo Creating .DEF file: $@
@echo LIBRARY $(notdir $*) INITINSTANCE TERMINSTANCE >$@
@echo DESCRIPTION $(DQUOTE)Python standard module $(notdir $*)$(DQUOTE) >>$@
@echo DATA MULTIPLE NONSHARED >>$@
@echo IMPORTS >>$@
@echo _curses.wnoutrefresh >>$@
@echo _curses._nc_panelhook >>$@
@echo _curses.is_linetouched >>$@
@echo _curses.mvwin >>$@
@echo _curses.stdscr >>$@
@echo _curses.wtouchln >>$@
@echo EXPORTS >>$@
@echo init_curses_panel >>$@
_curses$(MODLIB.EXT): $(OUT)_cursesmodule$O $(OUT)_curses_m.def $(PYTHON.IMPLIB)
$(LD) $(LDFLAGS.DLL) -o $@ $(^^) $(L^) $(LIBS) -lncurses
# curses_panel needs to be renamed to be useful
_curses_panel$(MODULE.EXT): $(OUT)_curses_panel$O $(OUT)_curses_panel_m.def $(PYTHON.IMPLIB)
$(LD) $(LDFLAGS.DLL) -o $@ $(^^) $(L^) $(LIBS) -lpanel
_curses_$(MODULE.EXT): _curses_panel$(MODULE.EXT)
cp $^ $@
_dbm$(MODULE.EXT): $(OUT)_dbmmodule$O $(OUT)dbm_m.def $(PYTHON.IMPLIB)
$(LD) $(LDFLAGS.DLL) -o $@ $(^^) $(L^) $(LIBS) -lgdbm
_gdbm$(MODULE.EXT): $(OUT)_gdbmmodule$O $(OUT)gdbm_m.def $(PYTHON.IMPLIB)
$(LD) $(LDFLAGS.DLL) -o $@ $(^^) $(L^) $(LIBS) -lgdbm
# Expat is now distributed with Python, so use the included version
$(OUT)pyexpat$O: ../../Modules/pyexpat.c
$(CC) $(CFLAGS) $(EXPAT.INC) -c -o $@ $^
$(OUT)xmlparse$O: ../../Modules/expat/xmlparse.c
$(CC) $(CFLAGS) $(EXPAT.INC) $(EXPAT.DEF) -c -o $@ $^
$(OUT)xmlrole$O: ../../Modules/expat/xmlrole.c
$(CC) $(CFLAGS) $(EXPAT.INC) $(EXPAT.DEF) -c -o $@ $^
$(OUT)xmltok$O: ../../Modules/expat/xmltok.c
$(CC) $(CFLAGS) $(EXPAT.INC) $(EXPAT.DEF) -c -o $@ $^
pyexpat$(MODULE.EXT): $(OUT)pyexpat$O $(OUT)xmlparse$O $(OUT)xmlrole$O \
$(OUT)xmltok$O $(OUT)pyexpat_m.def $(PYTHON.IMPLIB)
$(LD) $(LDFLAGS.DLL) -o $@ $(^^) $(L^) $(LIBS)
readline$(MODULE.EXT): $(OUT)readline$O $(OUT)readline_m.def $(PYTHON.IMPLIB)
$(LD) $(LDFLAGS.DLL) -o $@ $(^^) $(L^) $(LIBS) -lreadline -lncurses
#_tkinter$(MODULE.EXT): $(OUT)_tkinter$O $(OUT)tclNotify$O $(OUT)tkappinit$O
_tkinter$(MODULE.EXT): $(OUT)_tkinter$O $(OUT)tclNotify$O \
$(OUT)_tkinter_m.def $(PYTHON.IMPLIB)
$(LD) $(LDFLAGS.DLL) -o $@ $(^^) $(L^) $(LIBS) $(TK_LIBS)
zlib$(MODULE.EXT): $(OUT)zlibmodule$O $(OUT)zlib_m.def $(PYTHON.IMPLIB)
$(LD) $(LDFLAGS.DLL) -o $@ $(^^) $(L^) $(LIBS) -lz
bz2$(MODULE.EXT): $(OUT)bz2module$O $(OUT)bz2_m.def $(PYTHON.IMPLIB)
$(LD) $(LDFLAGS.DLL) -o $@ $(^^) $(L^) $(LIBS) -lbz2
_ssl$(MODULE.EXT): $(OUT)_ssl$O $(OUT)_ssl_m.def $(PYTHON.IMPLIB)
$(LD) $(LDFLAGS.DLL) -o $@ $(^^) $(L^) $(LIBS) -lssl -lcrypto
# the test target
test:
-find ../../Lib -name "*.py[co]" -exec rm {} ";"
-./python -E ../../lib/test/regrtest.py -l -u "network"
./python -E ../../lib/test/regrtest.py -l -u "network"
-include $(OUTBASE)python.dep