| #ifndef Py_PYPORT_H |
| #define Py_PYPORT_H |
| |
| #include "pyconfig.h" /* include for defines */ |
| |
| /************************************************************************** |
| Symbols and macros to supply platform-independent interfaces to basic |
| C language & library operations whose spellings vary across platforms. |
| |
| Please try to make documentation here as clear as possible: by definition, |
| the stuff here is trying to illuminate C's darkest corners. |
| |
| Config #defines referenced here: |
| |
| SIGNED_RIGHT_SHIFT_ZERO_FILLS |
| Meaning: To be defined iff i>>j does not extend the sign bit when i is a |
| signed integral type and i < 0. |
| Used in: Py_ARITHMETIC_RIGHT_SHIFT |
| |
| Py_DEBUG |
| Meaning: Extra checks compiled in for debug mode. |
| Used in: Py_SAFE_DOWNCAST |
| |
| HAVE_UINTPTR_T |
| Meaning: The C9X type uintptr_t is supported by the compiler |
| Used in: Py_uintptr_t |
| |
| HAVE_LONG_LONG |
| Meaning: The compiler supports the C type "long long" |
| Used in: PY_LONG_LONG |
| |
| **************************************************************************/ |
| |
| |
| /* For backward compatibility only. Obsolete, do not use. */ |
| #ifdef HAVE_PROTOTYPES |
| #define Py_PROTO(x) x |
| #else |
| #define Py_PROTO(x) () |
| #endif |
| #ifndef Py_FPROTO |
| #define Py_FPROTO(x) Py_PROTO(x) |
| #endif |
| |
| /* typedefs for some C9X-defined synonyms for integral types. |
| * |
| * The names in Python are exactly the same as the C9X names, except with a |
| * Py_ prefix. Until C9X is universally implemented, this is the only way |
| * to ensure that Python gets reliable names that don't conflict with names |
| * in non-Python code that are playing their own tricks to define the C9X |
| * names. |
| * |
| * NOTE: don't go nuts here! Python has no use for *most* of the C9X |
| * integral synonyms. Only define the ones we actually need. |
| */ |
| |
| #ifdef HAVE_LONG_LONG |
| #ifndef PY_LONG_LONG |
| #define PY_LONG_LONG long long |
| #endif |
| #endif /* HAVE_LONG_LONG */ |
| |
| /* uintptr_t is the C9X name for an unsigned integral type such that a |
| * legitimate void* can be cast to uintptr_t and then back to void* again |
| * without loss of information. Similarly for intptr_t, wrt a signed |
| * integral type. |
| */ |
| #ifdef HAVE_UINTPTR_T |
| typedef uintptr_t Py_uintptr_t; |
| typedef intptr_t Py_intptr_t; |
| |
| #elif SIZEOF_VOID_P <= SIZEOF_INT |
| typedef unsigned int Py_uintptr_t; |
| typedef int Py_intptr_t; |
| |
| #elif SIZEOF_VOID_P <= SIZEOF_LONG |
| typedef unsigned long Py_uintptr_t; |
| typedef long Py_intptr_t; |
| |
| #elif defined(HAVE_LONG_LONG) && (SIZEOF_VOID_P <= SIZEOF_LONG_LONG) |
| typedef unsigned PY_LONG_LONG Py_uintptr_t; |
| typedef PY_LONG_LONG Py_intptr_t; |
| |
| #else |
| # error "Python needs a typedef for Py_uintptr_t in pyport.h." |
| #endif /* HAVE_UINTPTR_T */ |
| |
| #ifdef HAVE_SSIZE_T |
| typedef ssize_t Py_ssize_t; |
| #elif SIZEOF_VOID_P == SIZEOF_SIZE_T |
| typedef Py_intptr_t Py_ssize_t; |
| #else |
| # error "Python needs a typedef for Py_ssize_t in pyport.h." |
| #endif |
| #define PY_SSIZE_T_MAX ((Py_ssize_t)(((size_t)-1)>>1)) |
| |
| #include <stdlib.h> |
| |
| #include <math.h> /* Moved here from the math section, before extern "C" */ |
| |
| /******************************************** |
| * WRAPPER FOR <time.h> and/or <sys/time.h> * |
| ********************************************/ |
| |
| #ifdef TIME_WITH_SYS_TIME |
| #include <sys/time.h> |
| #include <time.h> |
| #else /* !TIME_WITH_SYS_TIME */ |
| #ifdef HAVE_SYS_TIME_H |
| #include <sys/time.h> |
| #else /* !HAVE_SYS_TIME_H */ |
| #include <time.h> |
| #endif /* !HAVE_SYS_TIME_H */ |
| #endif /* !TIME_WITH_SYS_TIME */ |
| |
| |
| /****************************** |
| * WRAPPER FOR <sys/select.h> * |
| ******************************/ |
| |
| /* NB caller must include <sys/types.h> */ |
| |
| #ifdef HAVE_SYS_SELECT_H |
| |
| #include <sys/select.h> |
| |
| #endif /* !HAVE_SYS_SELECT_H */ |
| |
| /******************************* |
| * stat() and fstat() fiddling * |
| *******************************/ |
| |
| /* We expect that stat and fstat exist on most systems. |
| * It's confirmed on Unix, Mac and Windows. |
| * If you don't have them, add |
| * #define DONT_HAVE_STAT |
| * and/or |
| * #define DONT_HAVE_FSTAT |
| * to your pyconfig.h. Python code beyond this should check HAVE_STAT and |
| * HAVE_FSTAT instead. |
| * Also |
| * #define DONT_HAVE_SYS_STAT_H |
| * if <sys/stat.h> doesn't exist on your platform, and |
| * #define HAVE_STAT_H |
| * if <stat.h> does (don't look at me -- ths mess is inherited). |
| */ |
| #ifndef DONT_HAVE_STAT |
| #define HAVE_STAT |
| #endif |
| |
| #ifndef DONT_HAVE_FSTAT |
| #define HAVE_FSTAT |
| #endif |
| |
| #ifdef RISCOS |
| #include <sys/types.h> |
| #include "unixstuff.h" |
| #endif |
| |
| #ifndef DONT_HAVE_SYS_STAT_H |
| #if defined(PYOS_OS2) && defined(PYCC_GCC) |
| #include <sys/types.h> |
| #endif |
| #include <sys/stat.h> |
| #elif defined(HAVE_STAT_H) |
| #include <stat.h> |
| #endif |
| |
| #if defined(PYCC_VACPP) |
| /* VisualAge C/C++ Failed to Define MountType Field in sys/stat.h */ |
| #define S_IFMT (S_IFDIR|S_IFCHR|S_IFREG) |
| #endif |
| |
| #ifndef S_ISREG |
| #define S_ISREG(x) (((x) & S_IFMT) == S_IFREG) |
| #endif |
| |
| #ifndef S_ISDIR |
| #define S_ISDIR(x) (((x) & S_IFMT) == S_IFDIR) |
| #endif |
| |
| |
| #ifdef __cplusplus |
| /* Move this down here since some C++ #include's don't like to be included |
| inside an extern "C" */ |
| extern "C" { |
| #endif |
| |
| |
| /* Py_ARITHMETIC_RIGHT_SHIFT |
| * C doesn't define whether a right-shift of a signed integer sign-extends |
| * or zero-fills. Here a macro to force sign extension: |
| * Py_ARITHMETIC_RIGHT_SHIFT(TYPE, I, J) |
| * Return I >> J, forcing sign extension. |
| * Requirements: |
| * I is of basic signed type TYPE (char, short, int, long, or long long). |
| * TYPE is one of char, short, int, long, or long long, although long long |
| * must not be used except on platforms that support it. |
| * J is an integer >= 0 and strictly less than the number of bits in TYPE |
| * (because C doesn't define what happens for J outside that range either). |
| * Caution: |
| * I may be evaluated more than once. |
| */ |
| #ifdef SIGNED_RIGHT_SHIFT_ZERO_FILLS |
| #define Py_ARITHMETIC_RIGHT_SHIFT(TYPE, I, J) \ |
| ((I) < 0 ? ~((~(unsigned TYPE)(I)) >> (J)) : (I) >> (J)) |
| #else |
| #define Py_ARITHMETIC_RIGHT_SHIFT(TYPE, I, J) ((I) >> (J)) |
| #endif |
| |
| /* Py_FORCE_EXPANSION(X) |
| * "Simply" returns its argument. However, macro expansions within the |
| * argument are evaluated. This unfortunate trickery is needed to get |
| * token-pasting to work as desired in some cases. |
| */ |
| #define Py_FORCE_EXPANSION(X) X |
| |
| /* Py_SAFE_DOWNCAST(VALUE, WIDE, NARROW) |
| * Cast VALUE to type NARROW from type WIDE. In Py_DEBUG mode, this |
| * assert-fails if any information is lost. |
| * Caution: |
| * VALUE may be evaluated more than once. |
| */ |
| #ifdef Py_DEBUG |
| #define Py_SAFE_DOWNCAST(VALUE, WIDE, NARROW) \ |
| (assert((WIDE)(NARROW)(VALUE) == (VALUE)), (NARROW)(VALUE)) |
| #else |
| #define Py_SAFE_DOWNCAST(VALUE, WIDE, NARROW) (NARROW)(VALUE) |
| #endif |
| |
| /* Py_IS_NAN(X) |
| * Return 1 if float or double arg is a NaN, else 0. |
| * Caution: |
| * X is evaluated more than once. |
| * This may not work on all platforms. Each platform has *some* |
| * way to spell this, though -- override in pyconfig.h if you have |
| * a platform where it doesn't work. |
| */ |
| #ifndef Py_IS_NAN |
| #define Py_IS_NAN(X) ((X) != (X)) |
| #endif |
| |
| /* Py_IS_INFINITY(X) |
| * Return 1 if float or double arg is an infinity, else 0. |
| * Caution: |
| * X is evaluated more than once. |
| * This implementation may set the underflow flag if |X| is very small; |
| * it really can't be implemented correctly (& easily) before C99. |
| * Override in pyconfig.h if you have a better spelling on your platform. |
| */ |
| #ifndef Py_IS_INFINITY |
| #define Py_IS_INFINITY(X) ((X) && (X)*0.5 == (X)) |
| #endif |
| |
| /* HUGE_VAL is supposed to expand to a positive double infinity. Python |
| * uses Py_HUGE_VAL instead because some platforms are broken in this |
| * respect. We used to embed code in pyport.h to try to worm around that, |
| * but different platforms are broken in conflicting ways. If you're on |
| * a platform where HUGE_VAL is defined incorrectly, fiddle your Python |
| * config to #define Py_HUGE_VAL to something that works on your platform. |
| */ |
| #ifndef Py_HUGE_VAL |
| #define Py_HUGE_VAL HUGE_VAL |
| #endif |
| |
| /* Py_OVERFLOWED(X) |
| * Return 1 iff a libm function overflowed. Set errno to 0 before calling |
| * a libm function, and invoke this macro after, passing the function |
| * result. |
| * Caution: |
| * This isn't reliable. C99 no longer requires libm to set errno under |
| * any exceptional condition, but does require +- HUGE_VAL return |
| * values on overflow. A 754 box *probably* maps HUGE_VAL to a |
| * double infinity, and we're cool if that's so, unless the input |
| * was an infinity and an infinity is the expected result. A C89 |
| * system sets errno to ERANGE, so we check for that too. We're |
| * out of luck if a C99 754 box doesn't map HUGE_VAL to +Inf, or |
| * if the returned result is a NaN, or if a C89 box returns HUGE_VAL |
| * in non-overflow cases. |
| * X is evaluated more than once. |
| * Some platforms have better way to spell this, so expect some #ifdef'ery. |
| * |
| * OpenBSD uses 'isinf()' because a compiler bug on that platform causes |
| * the longer macro version to be mis-compiled. This isn't optimal, and |
| * should be removed once a newer compiler is available on that platform. |
| * The system that had the failure was running OpenBSD 3.2 on Intel, with |
| * gcc 2.95.3. |
| * |
| * According to Tim's checkin, the FreeBSD systems use isinf() to work |
| * around a FPE bug on that platform. |
| */ |
| #if defined(__FreeBSD__) || defined(__OpenBSD__) |
| #define Py_OVERFLOWED(X) isinf(X) |
| #else |
| #define Py_OVERFLOWED(X) ((X) != 0.0 && (errno == ERANGE || \ |
| (X) == Py_HUGE_VAL || \ |
| (X) == -Py_HUGE_VAL)) |
| #endif |
| |
| /* Py_SET_ERRNO_ON_MATH_ERROR(x) |
| * If a libm function did not set errno, but it looks like the result |
| * overflowed or not-a-number, set errno to ERANGE or EDOM. Set errno |
| * to 0 before calling a libm function, and invoke this macro after, |
| * passing the function result. |
| * Caution: |
| * This isn't reliable. See Py_OVERFLOWED comments. |
| * X is evaluated more than once. |
| */ |
| #if defined(__FreeBSD__) || defined(__OpenBSD__) || (defined(__hpux) && defined(__ia64)) |
| #define _Py_SET_EDOM_FOR_NAN(X) if (isnan(X)) errno = EDOM; |
| #else |
| #define _Py_SET_EDOM_FOR_NAN(X) ; |
| #endif |
| #define Py_SET_ERRNO_ON_MATH_ERROR(X) \ |
| do { \ |
| if (errno == 0) { \ |
| if ((X) == Py_HUGE_VAL || (X) == -Py_HUGE_VAL) \ |
| errno = ERANGE; \ |
| else _Py_SET_EDOM_FOR_NAN(X) \ |
| } \ |
| } while(0) |
| |
| /* Py_SET_ERANGE_ON_OVERFLOW(x) |
| * An alias of Py_SET_ERRNO_ON_MATH_ERROR for backward-compatibility. |
| */ |
| #define Py_SET_ERANGE_IF_OVERFLOW(X) Py_SET_ERRNO_ON_MATH_ERROR(X) |
| |
| /* Py_ADJUST_ERANGE1(x) |
| * Py_ADJUST_ERANGE2(x, y) |
| * Set errno to 0 before calling a libm function, and invoke one of these |
| * macros after, passing the function result(s) (Py_ADJUST_ERANGE2 is useful |
| * for functions returning complex results). This makes two kinds of |
| * adjustments to errno: (A) If it looks like the platform libm set |
| * errno=ERANGE due to underflow, clear errno. (B) If it looks like the |
| * platform libm overflowed but didn't set errno, force errno to ERANGE. In |
| * effect, we're trying to force a useful implementation of C89 errno |
| * behavior. |
| * Caution: |
| * This isn't reliable. See Py_OVERFLOWED comments. |
| * X and Y may be evaluated more than once. |
| */ |
| #define Py_ADJUST_ERANGE1(X) \ |
| do { \ |
| if (errno == 0) { \ |
| if ((X) == Py_HUGE_VAL || (X) == -Py_HUGE_VAL) \ |
| errno = ERANGE; \ |
| } \ |
| else if (errno == ERANGE && (X) == 0.0) \ |
| errno = 0; \ |
| } while(0) |
| |
| #define Py_ADJUST_ERANGE2(X, Y) \ |
| do { \ |
| if ((X) == Py_HUGE_VAL || (X) == -Py_HUGE_VAL || \ |
| (Y) == Py_HUGE_VAL || (Y) == -Py_HUGE_VAL) { \ |
| if (errno == 0) \ |
| errno = ERANGE; \ |
| } \ |
| else if (errno == ERANGE) \ |
| errno = 0; \ |
| } while(0) |
| |
| /* Py_DEPRECATED(version) |
| * Declare a variable, type, or function deprecated. |
| * Usage: |
| * extern int old_var Py_DEPRECATED(2.3); |
| * typedef int T1 Py_DEPRECATED(2.4); |
| * extern int x() Py_DEPRECATED(2.5); |
| */ |
| #if defined(__GNUC__) && (__GNUC__ == 3) && (__GNUC_MINOR__ >= 1) |
| #define Py_DEPRECATED(VERSION_UNUSED) __attribute__((__deprecated__)) |
| #else |
| #define Py_DEPRECATED(VERSION_UNUSED) |
| #endif |
| |
| /************************************************************************** |
| Prototypes that are missing from the standard include files on some systems |
| (and possibly only some versions of such systems.) |
| |
| Please be conservative with adding new ones, document them and enclose them |
| in platform-specific #ifdefs. |
| **************************************************************************/ |
| |
| #ifdef SOLARIS |
| /* Unchecked */ |
| extern int gethostname(char *, int); |
| #endif |
| |
| #ifdef __BEOS__ |
| /* Unchecked */ |
| /* It's in the libs, but not the headers... - [cjh] */ |
| int shutdown( int, int ); |
| #endif |
| |
| #ifdef HAVE__GETPTY |
| #include <sys/types.h> /* we need to import mode_t */ |
| extern char * _getpty(int *, int, mode_t, int); |
| #endif |
| |
| #if defined(HAVE_OPENPTY) || defined(HAVE_FORKPTY) |
| #if !defined(HAVE_PTY_H) && !defined(HAVE_LIBUTIL_H) |
| /* BSDI does not supply a prototype for the 'openpty' and 'forkpty' |
| functions, even though they are included in libutil. */ |
| #include <termios.h> |
| extern int openpty(int *, int *, char *, struct termios *, struct winsize *); |
| extern int forkpty(int *, char *, struct termios *, struct winsize *); |
| #endif /* !defined(HAVE_PTY_H) && !defined(HAVE_LIBUTIL_H) */ |
| #endif /* defined(HAVE_OPENPTY) || defined(HAVE_FORKPTY) */ |
| |
| |
| /* These are pulled from various places. It isn't obvious on what platforms |
| they are necessary, nor what the exact prototype should look like (which |
| is likely to vary between platforms!) If you find you need one of these |
| declarations, please move them to a platform-specific block and include |
| proper prototypes. */ |
| #if 0 |
| |
| /* From Modules/resource.c */ |
| extern int getrusage(); |
| extern int getpagesize(); |
| |
| /* From Python/sysmodule.c and Modules/posixmodule.c */ |
| extern int fclose(FILE *); |
| |
| /* From Modules/posixmodule.c */ |
| extern int fdatasync(int); |
| #endif /* 0 */ |
| |
| |
| /************************ |
| * WRAPPER FOR <math.h> * |
| ************************/ |
| |
| #ifndef HAVE_HYPOT |
| extern double hypot(double, double); |
| #endif |
| |
| |
| /******************************************************************* |
| On 4.4BSD-descendants, ctype functions serves the whole range of |
| wchar_t character set rather than single byte code points only. |
| This characteristic can break some operations of string object |
| including str.upper() and str.split() on UTF-8 locales. This |
| workaround was provided by Tim Robbins of FreeBSD project. He said |
| the incompatibility will be fixed in FreeBSD 6. |
| ********************************************************************/ |
| |
| #ifdef __FreeBSD__ |
| #include <osreldate.h> |
| #if __FreeBSD_version > 500039 |
| #include <ctype.h> |
| #include <wctype.h> |
| #undef isalnum |
| #define isalnum(c) iswalnum(btowc(c)) |
| #undef isalpha |
| #define isalpha(c) iswalpha(btowc(c)) |
| #undef islower |
| #define islower(c) iswlower(btowc(c)) |
| #undef isspace |
| #define isspace(c) iswspace(btowc(c)) |
| #undef isupper |
| #define isupper(c) iswupper(btowc(c)) |
| #undef tolower |
| #define tolower(c) towlower(btowc(c)) |
| #undef toupper |
| #define toupper(c) towupper(btowc(c)) |
| #endif |
| #endif |
| |
| |
| /* Declarations for symbol visibility. |
| |
| PyAPI_FUNC(type): Declares a public Python API function and return type |
| PyAPI_DATA(type): Declares public Python data and its type |
| PyMODINIT_FUNC: A Python module init function. If these functions are |
| inside the Python core, they are private to the core. |
| If in an extension module, it may be declared with |
| external linkage depending on the platform. |
| |
| As a number of platforms support/require "__declspec(dllimport/dllexport)", |
| we support a HAVE_DECLSPEC_DLL macro to save duplication. |
| */ |
| |
| /* |
| All windows ports, except cygwin, are handled in PC/pyconfig.h. |
| |
| BeOS and cygwin are the only other autoconf platform requiring special |
| linkage handling and both of these use __declspec(). |
| */ |
| #if defined(__CYGWIN__) || defined(__BEOS__) |
| # define HAVE_DECLSPEC_DLL |
| #endif |
| |
| /* only get special linkage if built as shared or platform is Cygwin */ |
| #if defined(Py_ENABLE_SHARED) || defined(__CYGWIN__) |
| # if defined(HAVE_DECLSPEC_DLL) |
| # ifdef Py_BUILD_CORE |
| # define PyAPI_FUNC(RTYPE) __declspec(dllexport) RTYPE |
| # define PyAPI_DATA(RTYPE) extern __declspec(dllexport) RTYPE |
| /* module init functions inside the core need no external linkage */ |
| /* except for Cygwin to handle embedding (FIXME: BeOS too?) */ |
| # if defined(__CYGWIN__) |
| # define PyMODINIT_FUNC __declspec(dllexport) void |
| # else /* __CYGWIN__ */ |
| # define PyMODINIT_FUNC void |
| # endif /* __CYGWIN__ */ |
| # else /* Py_BUILD_CORE */ |
| /* Building an extension module, or an embedded situation */ |
| /* public Python functions and data are imported */ |
| /* Under Cygwin, auto-import functions to prevent compilation */ |
| /* failures similar to http://python.org/doc/FAQ.html#3.24 */ |
| # if !defined(__CYGWIN__) |
| # define PyAPI_FUNC(RTYPE) __declspec(dllimport) RTYPE |
| # endif /* !__CYGWIN__ */ |
| # define PyAPI_DATA(RTYPE) extern __declspec(dllimport) RTYPE |
| /* module init functions outside the core must be exported */ |
| # if defined(__cplusplus) |
| # define PyMODINIT_FUNC extern "C" __declspec(dllexport) void |
| # else /* __cplusplus */ |
| # define PyMODINIT_FUNC __declspec(dllexport) void |
| # endif /* __cplusplus */ |
| # endif /* Py_BUILD_CORE */ |
| # endif /* HAVE_DECLSPEC */ |
| #endif /* Py_ENABLE_SHARED */ |
| |
| /* If no external linkage macros defined by now, create defaults */ |
| #ifndef PyAPI_FUNC |
| # define PyAPI_FUNC(RTYPE) RTYPE |
| #endif |
| #ifndef PyAPI_DATA |
| # define PyAPI_DATA(RTYPE) extern RTYPE |
| #endif |
| #ifndef PyMODINIT_FUNC |
| # if defined(__cplusplus) |
| # define PyMODINIT_FUNC extern "C" void |
| # else /* __cplusplus */ |
| # define PyMODINIT_FUNC void |
| # endif /* __cplusplus */ |
| #endif |
| |
| /* Deprecated DL_IMPORT and DL_EXPORT macros */ |
| #if defined(Py_ENABLE_SHARED) && defined (HAVE_DECLSPEC_DLL) |
| # if defined(Py_BUILD_CORE) |
| # define DL_IMPORT(RTYPE) __declspec(dllexport) RTYPE |
| # define DL_EXPORT(RTYPE) __declspec(dllexport) RTYPE |
| # else |
| # define DL_IMPORT(RTYPE) __declspec(dllimport) RTYPE |
| # define DL_EXPORT(RTYPE) __declspec(dllexport) RTYPE |
| # endif |
| #endif |
| #ifndef DL_EXPORT |
| # define DL_EXPORT(RTYPE) RTYPE |
| #endif |
| #ifndef DL_IMPORT |
| # define DL_IMPORT(RTYPE) RTYPE |
| #endif |
| /* End of deprecated DL_* macros */ |
| |
| /* If the fd manipulation macros aren't defined, |
| here is a set that should do the job */ |
| |
| #if 0 /* disabled and probably obsolete */ |
| |
| #ifndef FD_SETSIZE |
| #define FD_SETSIZE 256 |
| #endif |
| |
| #ifndef FD_SET |
| |
| typedef long fd_mask; |
| |
| #define NFDBITS (sizeof(fd_mask) * NBBY) /* bits per mask */ |
| #ifndef howmany |
| #define howmany(x, y) (((x)+((y)-1))/(y)) |
| #endif /* howmany */ |
| |
| typedef struct fd_set { |
| fd_mask fds_bits[howmany(FD_SETSIZE, NFDBITS)]; |
| } fd_set; |
| |
| #define FD_SET(n, p) ((p)->fds_bits[(n)/NFDBITS] |= (1 << ((n) % NFDBITS))) |
| #define FD_CLR(n, p) ((p)->fds_bits[(n)/NFDBITS] &= ~(1 << ((n) % NFDBITS))) |
| #define FD_ISSET(n, p) ((p)->fds_bits[(n)/NFDBITS] & (1 << ((n) % NFDBITS))) |
| #define FD_ZERO(p) memset((char *)(p), '\0', sizeof(*(p))) |
| |
| #endif /* FD_SET */ |
| |
| #endif /* fd manipulation macros */ |
| |
| |
| /* limits.h constants that may be missing */ |
| |
| #ifndef INT_MAX |
| #define INT_MAX 2147483647 |
| #endif |
| |
| #ifndef LONG_MAX |
| #if SIZEOF_LONG == 4 |
| #define LONG_MAX 0X7FFFFFFFL |
| #elif SIZEOF_LONG == 8 |
| #define LONG_MAX 0X7FFFFFFFFFFFFFFFL |
| #else |
| #error "could not set LONG_MAX in pyport.h" |
| #endif |
| #endif |
| |
| #ifndef LONG_MIN |
| #define LONG_MIN (-LONG_MAX-1) |
| #endif |
| |
| #ifndef LONG_BIT |
| #define LONG_BIT (8 * SIZEOF_LONG) |
| #endif |
| |
| #if LONG_BIT != 8 * SIZEOF_LONG |
| /* 04-Oct-2000 LONG_BIT is apparently (mis)defined as 64 on some recent |
| * 32-bit platforms using gcc. We try to catch that here at compile-time |
| * rather than waiting for integer multiplication to trigger bogus |
| * overflows. |
| */ |
| #error "LONG_BIT definition appears wrong for platform (bad gcc/glibc config?)." |
| #endif |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| /* |
| * Hide GCC attributes from compilers that don't support them. |
| */ |
| #if (!defined(__GNUC__) || __GNUC__ < 2 || \ |
| (__GNUC__ == 2 && __GNUC_MINOR__ < 7) ) && \ |
| !defined(RISCOS) |
| #define Py_GCC_ATTRIBUTE(x) |
| #else |
| #define Py_GCC_ATTRIBUTE(x) __attribute__(x) |
| #endif |
| |
| /* Eliminate end-of-loop code not reached warnings from SunPro C |
| * when using do{...}while(0) macros |
| */ |
| #ifdef __SUNPRO_C |
| #pragma error_messages (off,E_END_OF_LOOP_CODE_NOT_REACHED) |
| #endif |
| |
| #endif /* Py_PYPORT_H */ |