| r"""TELNET client class. |
| |
| Based on RFC 854: TELNET Protocol Specification, by J. Postel and |
| J. Reynolds |
| |
| Example: |
| |
| >>> from telnetlib import Telnet |
| >>> tn = Telnet('www.python.org', 79) # connect to finger port |
| >>> tn.write(b'guido\r\n') |
| >>> print(tn.read_all()) |
| Login Name TTY Idle When Where |
| guido Guido van Rossum pts/2 <Dec 2 11:10> snag.cnri.reston.. |
| |
| >>> |
| |
| Note that read_all() won't read until eof -- it just reads some data |
| -- but it guarantees to read at least one byte unless EOF is hit. |
| |
| It is possible to pass a Telnet object to a selector in order to wait until |
| more data is available. Note that in this case, read_eager() may return b'' |
| even if there was data on the socket, because the protocol negotiation may have |
| eaten the data. This is why EOFError is needed in some cases to distinguish |
| between "no data" and "connection closed" (since the socket also appears ready |
| for reading when it is closed). |
| |
| To do: |
| - option negotiation |
| - timeout should be intrinsic to the connection object instead of an |
| option on one of the read calls only |
| |
| """ |
| |
| |
| # Imported modules |
| import sys |
| import socket |
| import selectors |
| try: |
| from time import monotonic as _time |
| except ImportError: |
| from time import time as _time |
| |
| __all__ = ["Telnet"] |
| |
| # Tunable parameters |
| DEBUGLEVEL = 0 |
| |
| # Telnet protocol defaults |
| TELNET_PORT = 23 |
| |
| # Telnet protocol characters (don't change) |
| IAC = bytes([255]) # "Interpret As Command" |
| DONT = bytes([254]) |
| DO = bytes([253]) |
| WONT = bytes([252]) |
| WILL = bytes([251]) |
| theNULL = bytes([0]) |
| |
| SE = bytes([240]) # Subnegotiation End |
| NOP = bytes([241]) # No Operation |
| DM = bytes([242]) # Data Mark |
| BRK = bytes([243]) # Break |
| IP = bytes([244]) # Interrupt process |
| AO = bytes([245]) # Abort output |
| AYT = bytes([246]) # Are You There |
| EC = bytes([247]) # Erase Character |
| EL = bytes([248]) # Erase Line |
| GA = bytes([249]) # Go Ahead |
| SB = bytes([250]) # Subnegotiation Begin |
| |
| |
| # Telnet protocol options code (don't change) |
| # These ones all come from arpa/telnet.h |
| BINARY = bytes([0]) # 8-bit data path |
| ECHO = bytes([1]) # echo |
| RCP = bytes([2]) # prepare to reconnect |
| SGA = bytes([3]) # suppress go ahead |
| NAMS = bytes([4]) # approximate message size |
| STATUS = bytes([5]) # give status |
| TM = bytes([6]) # timing mark |
| RCTE = bytes([7]) # remote controlled transmission and echo |
| NAOL = bytes([8]) # negotiate about output line width |
| NAOP = bytes([9]) # negotiate about output page size |
| NAOCRD = bytes([10]) # negotiate about CR disposition |
| NAOHTS = bytes([11]) # negotiate about horizontal tabstops |
| NAOHTD = bytes([12]) # negotiate about horizontal tab disposition |
| NAOFFD = bytes([13]) # negotiate about formfeed disposition |
| NAOVTS = bytes([14]) # negotiate about vertical tab stops |
| NAOVTD = bytes([15]) # negotiate about vertical tab disposition |
| NAOLFD = bytes([16]) # negotiate about output LF disposition |
| XASCII = bytes([17]) # extended ascii character set |
| LOGOUT = bytes([18]) # force logout |
| BM = bytes([19]) # byte macro |
| DET = bytes([20]) # data entry terminal |
| SUPDUP = bytes([21]) # supdup protocol |
| SUPDUPOUTPUT = bytes([22]) # supdup output |
| SNDLOC = bytes([23]) # send location |
| TTYPE = bytes([24]) # terminal type |
| EOR = bytes([25]) # end or record |
| TUID = bytes([26]) # TACACS user identification |
| OUTMRK = bytes([27]) # output marking |
| TTYLOC = bytes([28]) # terminal location number |
| VT3270REGIME = bytes([29]) # 3270 regime |
| X3PAD = bytes([30]) # X.3 PAD |
| NAWS = bytes([31]) # window size |
| TSPEED = bytes([32]) # terminal speed |
| LFLOW = bytes([33]) # remote flow control |
| LINEMODE = bytes([34]) # Linemode option |
| XDISPLOC = bytes([35]) # X Display Location |
| OLD_ENVIRON = bytes([36]) # Old - Environment variables |
| AUTHENTICATION = bytes([37]) # Authenticate |
| ENCRYPT = bytes([38]) # Encryption option |
| NEW_ENVIRON = bytes([39]) # New - Environment variables |
| # the following ones come from |
| # http://www.iana.org/assignments/telnet-options |
| # Unfortunately, that document does not assign identifiers |
| # to all of them, so we are making them up |
| TN3270E = bytes([40]) # TN3270E |
| XAUTH = bytes([41]) # XAUTH |
| CHARSET = bytes([42]) # CHARSET |
| RSP = bytes([43]) # Telnet Remote Serial Port |
| COM_PORT_OPTION = bytes([44]) # Com Port Control Option |
| SUPPRESS_LOCAL_ECHO = bytes([45]) # Telnet Suppress Local Echo |
| TLS = bytes([46]) # Telnet Start TLS |
| KERMIT = bytes([47]) # KERMIT |
| SEND_URL = bytes([48]) # SEND-URL |
| FORWARD_X = bytes([49]) # FORWARD_X |
| PRAGMA_LOGON = bytes([138]) # TELOPT PRAGMA LOGON |
| SSPI_LOGON = bytes([139]) # TELOPT SSPI LOGON |
| PRAGMA_HEARTBEAT = bytes([140]) # TELOPT PRAGMA HEARTBEAT |
| EXOPL = bytes([255]) # Extended-Options-List |
| NOOPT = bytes([0]) |
| |
| |
| # poll/select have the advantage of not requiring any extra file descriptor, |
| # contrarily to epoll/kqueue (also, they require a single syscall). |
| if hasattr(selectors, 'PollSelector'): |
| _TelnetSelector = selectors.PollSelector |
| else: |
| _TelnetSelector = selectors.SelectSelector |
| |
| |
| class Telnet: |
| |
| """Telnet interface class. |
| |
| An instance of this class represents a connection to a telnet |
| server. The instance is initially not connected; the open() |
| method must be used to establish a connection. Alternatively, the |
| host name and optional port number can be passed to the |
| constructor, too. |
| |
| Don't try to reopen an already connected instance. |
| |
| This class has many read_*() methods. Note that some of them |
| raise EOFError when the end of the connection is read, because |
| they can return an empty string for other reasons. See the |
| individual doc strings. |
| |
| read_until(expected, [timeout]) |
| Read until the expected string has been seen, or a timeout is |
| hit (default is no timeout); may block. |
| |
| read_all() |
| Read all data until EOF; may block. |
| |
| read_some() |
| Read at least one byte or EOF; may block. |
| |
| read_very_eager() |
| Read all data available already queued or on the socket, |
| without blocking. |
| |
| read_eager() |
| Read either data already queued or some data available on the |
| socket, without blocking. |
| |
| read_lazy() |
| Read all data in the raw queue (processing it first), without |
| doing any socket I/O. |
| |
| read_very_lazy() |
| Reads all data in the cooked queue, without doing any socket |
| I/O. |
| |
| read_sb_data() |
| Reads available data between SB ... SE sequence. Don't block. |
| |
| set_option_negotiation_callback(callback) |
| Each time a telnet option is read on the input flow, this callback |
| (if set) is called with the following parameters : |
| callback(telnet socket, command, option) |
| option will be chr(0) when there is no option. |
| No other action is done afterwards by telnetlib. |
| |
| """ |
| |
| def __init__(self, host=None, port=0, |
| timeout=socket._GLOBAL_DEFAULT_TIMEOUT): |
| """Constructor. |
| |
| When called without arguments, create an unconnected instance. |
| With a hostname argument, it connects the instance; port number |
| and timeout are optional. |
| """ |
| self.debuglevel = DEBUGLEVEL |
| self.host = host |
| self.port = port |
| self.timeout = timeout |
| self.sock = None |
| self.rawq = b'' |
| self.irawq = 0 |
| self.cookedq = b'' |
| self.eof = 0 |
| self.iacseq = b'' # Buffer for IAC sequence. |
| self.sb = 0 # flag for SB and SE sequence. |
| self.sbdataq = b'' |
| self.option_callback = None |
| if host is not None: |
| self.open(host, port, timeout) |
| |
| def open(self, host, port=0, timeout=socket._GLOBAL_DEFAULT_TIMEOUT): |
| """Connect to a host. |
| |
| The optional second argument is the port number, which |
| defaults to the standard telnet port (23). |
| |
| Don't try to reopen an already connected instance. |
| """ |
| self.eof = 0 |
| if not port: |
| port = TELNET_PORT |
| self.host = host |
| self.port = port |
| self.timeout = timeout |
| self.sock = socket.create_connection((host, port), timeout) |
| |
| def __del__(self): |
| """Destructor -- close the connection.""" |
| self.close() |
| |
| def msg(self, msg, *args): |
| """Print a debug message, when the debug level is > 0. |
| |
| If extra arguments are present, they are substituted in the |
| message using the standard string formatting operator. |
| |
| """ |
| if self.debuglevel > 0: |
| print('Telnet(%s,%s):' % (self.host, self.port), end=' ') |
| if args: |
| print(msg % args) |
| else: |
| print(msg) |
| |
| def set_debuglevel(self, debuglevel): |
| """Set the debug level. |
| |
| The higher it is, the more debug output you get (on sys.stdout). |
| |
| """ |
| self.debuglevel = debuglevel |
| |
| def close(self): |
| """Close the connection.""" |
| sock = self.sock |
| self.sock = 0 |
| self.eof = 1 |
| self.iacseq = b'' |
| self.sb = 0 |
| if sock: |
| sock.close() |
| |
| def get_socket(self): |
| """Return the socket object used internally.""" |
| return self.sock |
| |
| def fileno(self): |
| """Return the fileno() of the socket object used internally.""" |
| return self.sock.fileno() |
| |
| def write(self, buffer): |
| """Write a string to the socket, doubling any IAC characters. |
| |
| Can block if the connection is blocked. May raise |
| OSError if the connection is closed. |
| |
| """ |
| if IAC in buffer: |
| buffer = buffer.replace(IAC, IAC+IAC) |
| self.msg("send %r", buffer) |
| self.sock.sendall(buffer) |
| |
| def read_until(self, match, timeout=None): |
| """Read until a given string is encountered or until timeout. |
| |
| When no match is found, return whatever is available instead, |
| possibly the empty string. Raise EOFError if the connection |
| is closed and no cooked data is available. |
| |
| """ |
| n = len(match) |
| self.process_rawq() |
| i = self.cookedq.find(match) |
| if i >= 0: |
| i = i+n |
| buf = self.cookedq[:i] |
| self.cookedq = self.cookedq[i:] |
| return buf |
| if timeout is not None: |
| deadline = _time() + timeout |
| with _TelnetSelector() as selector: |
| selector.register(self, selectors.EVENT_READ) |
| while not self.eof: |
| if selector.select(timeout): |
| i = max(0, len(self.cookedq)-n) |
| self.fill_rawq() |
| self.process_rawq() |
| i = self.cookedq.find(match, i) |
| if i >= 0: |
| i = i+n |
| buf = self.cookedq[:i] |
| self.cookedq = self.cookedq[i:] |
| return buf |
| if timeout is not None: |
| timeout = deadline - _time() |
| if timeout < 0: |
| break |
| return self.read_very_lazy() |
| |
| def read_all(self): |
| """Read all data until EOF; block until connection closed.""" |
| self.process_rawq() |
| while not self.eof: |
| self.fill_rawq() |
| self.process_rawq() |
| buf = self.cookedq |
| self.cookedq = b'' |
| return buf |
| |
| def read_some(self): |
| """Read at least one byte of cooked data unless EOF is hit. |
| |
| Return b'' if EOF is hit. Block if no data is immediately |
| available. |
| |
| """ |
| self.process_rawq() |
| while not self.cookedq and not self.eof: |
| self.fill_rawq() |
| self.process_rawq() |
| buf = self.cookedq |
| self.cookedq = b'' |
| return buf |
| |
| def read_very_eager(self): |
| """Read everything that's possible without blocking in I/O (eager). |
| |
| Raise EOFError if connection closed and no cooked data |
| available. Return b'' if no cooked data available otherwise. |
| Don't block unless in the midst of an IAC sequence. |
| |
| """ |
| self.process_rawq() |
| while not self.eof and self.sock_avail(): |
| self.fill_rawq() |
| self.process_rawq() |
| return self.read_very_lazy() |
| |
| def read_eager(self): |
| """Read readily available data. |
| |
| Raise EOFError if connection closed and no cooked data |
| available. Return b'' if no cooked data available otherwise. |
| Don't block unless in the midst of an IAC sequence. |
| |
| """ |
| self.process_rawq() |
| while not self.cookedq and not self.eof and self.sock_avail(): |
| self.fill_rawq() |
| self.process_rawq() |
| return self.read_very_lazy() |
| |
| def read_lazy(self): |
| """Process and return data that's already in the queues (lazy). |
| |
| Raise EOFError if connection closed and no data available. |
| Return b'' if no cooked data available otherwise. Don't block |
| unless in the midst of an IAC sequence. |
| |
| """ |
| self.process_rawq() |
| return self.read_very_lazy() |
| |
| def read_very_lazy(self): |
| """Return any data available in the cooked queue (very lazy). |
| |
| Raise EOFError if connection closed and no data available. |
| Return b'' if no cooked data available otherwise. Don't block. |
| |
| """ |
| buf = self.cookedq |
| self.cookedq = b'' |
| if not buf and self.eof and not self.rawq: |
| raise EOFError('telnet connection closed') |
| return buf |
| |
| def read_sb_data(self): |
| """Return any data available in the SB ... SE queue. |
| |
| Return b'' if no SB ... SE available. Should only be called |
| after seeing a SB or SE command. When a new SB command is |
| found, old unread SB data will be discarded. Don't block. |
| |
| """ |
| buf = self.sbdataq |
| self.sbdataq = b'' |
| return buf |
| |
| def set_option_negotiation_callback(self, callback): |
| """Provide a callback function called after each receipt of a telnet option.""" |
| self.option_callback = callback |
| |
| def process_rawq(self): |
| """Transfer from raw queue to cooked queue. |
| |
| Set self.eof when connection is closed. Don't block unless in |
| the midst of an IAC sequence. |
| |
| """ |
| buf = [b'', b''] |
| try: |
| while self.rawq: |
| c = self.rawq_getchar() |
| if not self.iacseq: |
| if c == theNULL: |
| continue |
| if c == b"\021": |
| continue |
| if c != IAC: |
| buf[self.sb] = buf[self.sb] + c |
| continue |
| else: |
| self.iacseq += c |
| elif len(self.iacseq) == 1: |
| # 'IAC: IAC CMD [OPTION only for WILL/WONT/DO/DONT]' |
| if c in (DO, DONT, WILL, WONT): |
| self.iacseq += c |
| continue |
| |
| self.iacseq = b'' |
| if c == IAC: |
| buf[self.sb] = buf[self.sb] + c |
| else: |
| if c == SB: # SB ... SE start. |
| self.sb = 1 |
| self.sbdataq = b'' |
| elif c == SE: |
| self.sb = 0 |
| self.sbdataq = self.sbdataq + buf[1] |
| buf[1] = b'' |
| if self.option_callback: |
| # Callback is supposed to look into |
| # the sbdataq |
| self.option_callback(self.sock, c, NOOPT) |
| else: |
| # We can't offer automatic processing of |
| # suboptions. Alas, we should not get any |
| # unless we did a WILL/DO before. |
| self.msg('IAC %d not recognized' % ord(c)) |
| elif len(self.iacseq) == 2: |
| cmd = self.iacseq[1:2] |
| self.iacseq = b'' |
| opt = c |
| if cmd in (DO, DONT): |
| self.msg('IAC %s %d', |
| cmd == DO and 'DO' or 'DONT', ord(opt)) |
| if self.option_callback: |
| self.option_callback(self.sock, cmd, opt) |
| else: |
| self.sock.sendall(IAC + WONT + opt) |
| elif cmd in (WILL, WONT): |
| self.msg('IAC %s %d', |
| cmd == WILL and 'WILL' or 'WONT', ord(opt)) |
| if self.option_callback: |
| self.option_callback(self.sock, cmd, opt) |
| else: |
| self.sock.sendall(IAC + DONT + opt) |
| except EOFError: # raised by self.rawq_getchar() |
| self.iacseq = b'' # Reset on EOF |
| self.sb = 0 |
| pass |
| self.cookedq = self.cookedq + buf[0] |
| self.sbdataq = self.sbdataq + buf[1] |
| |
| def rawq_getchar(self): |
| """Get next char from raw queue. |
| |
| Block if no data is immediately available. Raise EOFError |
| when connection is closed. |
| |
| """ |
| if not self.rawq: |
| self.fill_rawq() |
| if self.eof: |
| raise EOFError |
| c = self.rawq[self.irawq:self.irawq+1] |
| self.irawq = self.irawq + 1 |
| if self.irawq >= len(self.rawq): |
| self.rawq = b'' |
| self.irawq = 0 |
| return c |
| |
| def fill_rawq(self): |
| """Fill raw queue from exactly one recv() system call. |
| |
| Block if no data is immediately available. Set self.eof when |
| connection is closed. |
| |
| """ |
| if self.irawq >= len(self.rawq): |
| self.rawq = b'' |
| self.irawq = 0 |
| # The buffer size should be fairly small so as to avoid quadratic |
| # behavior in process_rawq() above |
| buf = self.sock.recv(50) |
| self.msg("recv %r", buf) |
| self.eof = (not buf) |
| self.rawq = self.rawq + buf |
| |
| def sock_avail(self): |
| """Test whether data is available on the socket.""" |
| with _TelnetSelector() as selector: |
| selector.register(self, selectors.EVENT_READ) |
| return bool(selector.select(0)) |
| |
| def interact(self): |
| """Interaction function, emulates a very dumb telnet client.""" |
| if sys.platform == "win32": |
| self.mt_interact() |
| return |
| with _TelnetSelector() as selector: |
| selector.register(self, selectors.EVENT_READ) |
| selector.register(sys.stdin, selectors.EVENT_READ) |
| |
| while True: |
| for key, events in selector.select(): |
| if key.fileobj is self: |
| try: |
| text = self.read_eager() |
| except EOFError: |
| print('*** Connection closed by remote host ***') |
| return |
| if text: |
| sys.stdout.write(text.decode('ascii')) |
| sys.stdout.flush() |
| elif key.fileobj is sys.stdin: |
| line = sys.stdin.readline().encode('ascii') |
| if not line: |
| return |
| self.write(line) |
| |
| def mt_interact(self): |
| """Multithreaded version of interact().""" |
| import _thread |
| _thread.start_new_thread(self.listener, ()) |
| while 1: |
| line = sys.stdin.readline() |
| if not line: |
| break |
| self.write(line.encode('ascii')) |
| |
| def listener(self): |
| """Helper for mt_interact() -- this executes in the other thread.""" |
| while 1: |
| try: |
| data = self.read_eager() |
| except EOFError: |
| print('*** Connection closed by remote host ***') |
| return |
| if data: |
| sys.stdout.write(data.decode('ascii')) |
| else: |
| sys.stdout.flush() |
| |
| def expect(self, list, timeout=None): |
| """Read until one from a list of a regular expressions matches. |
| |
| The first argument is a list of regular expressions, either |
| compiled (re.RegexObject instances) or uncompiled (strings). |
| The optional second argument is a timeout, in seconds; default |
| is no timeout. |
| |
| Return a tuple of three items: the index in the list of the |
| first regular expression that matches; the match object |
| returned; and the text read up till and including the match. |
| |
| If EOF is read and no text was read, raise EOFError. |
| Otherwise, when nothing matches, return (-1, None, text) where |
| text is the text received so far (may be the empty string if a |
| timeout happened). |
| |
| If a regular expression ends with a greedy match (e.g. '.*') |
| or if more than one expression can match the same input, the |
| results are undeterministic, and may depend on the I/O timing. |
| |
| """ |
| re = None |
| list = list[:] |
| indices = range(len(list)) |
| for i in indices: |
| if not hasattr(list[i], "search"): |
| if not re: import re |
| list[i] = re.compile(list[i]) |
| if timeout is not None: |
| deadline = _time() + timeout |
| with _TelnetSelector() as selector: |
| selector.register(self, selectors.EVENT_READ) |
| while not self.eof: |
| self.process_rawq() |
| for i in indices: |
| m = list[i].search(self.cookedq) |
| if m: |
| e = m.end() |
| text = self.cookedq[:e] |
| self.cookedq = self.cookedq[e:] |
| return (i, m, text) |
| if timeout is not None: |
| ready = selector.select(timeout) |
| timeout = deadline - _time() |
| if not ready: |
| if timeout < 0: |
| break |
| else: |
| continue |
| self.fill_rawq() |
| text = self.read_very_lazy() |
| if not text and self.eof: |
| raise EOFError |
| return (-1, None, text) |
| |
| |
| def test(): |
| """Test program for telnetlib. |
| |
| Usage: python telnetlib.py [-d] ... [host [port]] |
| |
| Default host is localhost; default port is 23. |
| |
| """ |
| debuglevel = 0 |
| while sys.argv[1:] and sys.argv[1] == '-d': |
| debuglevel = debuglevel+1 |
| del sys.argv[1] |
| host = 'localhost' |
| if sys.argv[1:]: |
| host = sys.argv[1] |
| port = 0 |
| if sys.argv[2:]: |
| portstr = sys.argv[2] |
| try: |
| port = int(portstr) |
| except ValueError: |
| port = socket.getservbyname(portstr, 'tcp') |
| tn = Telnet() |
| tn.set_debuglevel(debuglevel) |
| tn.open(host, port, timeout=0.5) |
| tn.interact() |
| tn.close() |
| |
| if __name__ == '__main__': |
| test() |