Makefile.in - platform/external/python/cpython3 - Gitiles

 ########################################################################
 # Copyright 1991-1995 by Stichting Mathematisch Centrum, Amsterdam,
 # The Netherlands.
 #
 #                         All Rights Reserved
 #
 # Permission to use, copy, modify, and distribute this software and its
 # documentation for any purpose and without fee is hereby granted,
 # provided that the above copyright notice appear in all copies and that
 # both that copyright notice and this permission notice appear in
 # supporting documentation, and that the names of Stichting Mathematisch
 # Centrum or CWI or Corporation for National Research Initiatives or
 # CNRI not be used in advertising or publicity pertaining to
 # distribution of the software without specific, written prior
 # permission.
 #
 # While CWI is the initial source for this software, a modified version
 # is made available by the Corporation for National Research Initiatives
 # (CNRI) at the Internet address ftp://ftp.python.org.
 #
 # STICHTING MATHEMATISCH CENTRUM AND CNRI DISCLAIM ALL WARRANTIES WITH
 # REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF
 # MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL STICHTING MATHEMATISCH
 # CENTRUM OR CNRI BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
 # DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
 # PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
 # TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 # PERFORMANCE OF THIS SOFTWARE.
 ########################################################################

 # Top-level Makefile for Python
 #
 # As distributed, this file is called Makefile.in; it is processed
 # into the real Makefile by running the script ./configure, which
 # replaces things like @spam@ with values appropriate for your system.
 # This means that if you edit Makefile, your changes get lost the next
 # time you run the configure script.  Ideally, you can do:
 #
 #	./configure
 #	make
 #	make test
 #	make install
 #
 # The top-level Makefile invokes make recursively in a number of
 # subdirectories (see the SUBDIRS variable below).  If you want to,
 # you can invoke make in individual subdirectories.  However, the
 # sub-Makefiles are also generated by configure, and the quickest way
 # to make sure they are up to date is by running make (or "make
 # Makefiles") at the top level.  This is particularly important for
 # Modules/Makefile, which has to be regenerated every time you edit
 # Modules/Setup.  The python executable is built in the Modules
 # directory and then moved to the top-level directory.  The recursive
 # makes pass three options to subordinate makes: OPT (a quick way to
 # change some compiler options; it usually defaults to -O), prefix and
 # exec_prefix (the installation paths).
 #
 # If you have a previous version of Python installed that you don't
 # want to overwrite, you can use "make altinstall" instead of "make
 # install".  This changes the install procedure so it installs the
 # Python binary as "python<version>".  The libraries and include files
 # are always installed in a subdirectory called "python<version>".
 # "make altinstall" does not install the manual page.  If you want to
 # make this installation the "official" installation but want to keep
 # the old binary around "just in case", rename the installed python
 # binary to "python<oldversion>" before running "make install".
 # (This only works between different versions, e.g. 1.3 and 1.4 --
 # different betas of the same version will overwrite each other in
 # installation unless you override the VERSION Make variable.)
 #
 # In fact, "make install" or "make bininstall" installs the binary
 # as python<version> and makes a hard link to python, so when
 # installing a new version in the future, nothing of the current
 # version will be lost (except for the man page).
 #
 # If recursive makes fail, try invoking make as "make MAKE=make".
 #
 # See also the section "Build instructions" in the README file.

 # Substitutions by configure
 VERSION=	@VERSION@
 srcdir=		@srcdir@
 VPATH=		@srcdir@
 CC=		@CC@
 AR=		@AR@
 RANLIB=		@RANLIB@
 DEFS=		@DEFS@

 # Machine-dependent subdirectories
 MACHDEP=	@MACHDEP@

 # Install prefix for architecture-independent files
 prefix=		@prefix@

 # Install prefix for architecture-dependent files
 exec_prefix=	@exec_prefix@

 # Expanded directories
 BINDIR=		$(exec_prefix)/bin
 LIBDIR=		$(exec_prefix)/lib
 MANDIR=		$(prefix)/man
 INCLUDEDIR=	$(prefix)/include
 CONFINCLUDEDIR=	$(exec_prefix)/include
 SCRIPTDIR=	$(prefix)/lib

 # Detailed destination directories
 BINLIBDEST=	$(LIBDIR)/python$(VERSION)
 LIBDEST=	$(SCRIPTDIR)/python$(VERSION)
 INCLUDEPY=	$(INCLUDEDIR)/python$(VERSION)
 CONFINCLUDEPY=	$(CONFINCLUDEDIR)/python$(VERSION)
 LIBP=		$(LIBDIR)/python$(VERSION)

 # Symbols used for using shared libraries
 SO=		@SO@
 LDSHARED=	@LDSHARED@
 CCSHARED=	@CCSHARED@
 LINKFORSHARED=	@LINKFORSHARED@
 DESTSHARED=	$(BINLIBDEST)/lib-dynload

 # Shell used by make (some versions default to the login shell, which is bad)
 SHELL=		/bin/sh

 # Use ``EXE=.exe'' for Unix emulations on DOS/Windows (e.g. GNUWIN32)
 EXE=

 # Modes for directories, executables and data files created by the
 # install process.  Default to group-writable directories but
 # user-only-writable for executables and data files.
 DIRMODE=	775
 EXEMODE=	755
 FILEMODE=	644

 # Portable install script (configure doesn't always guess right)
 INSTALL=	@srcdir@/install-sh -c
 INSTALL_PROGRAM=${INSTALL} -m $(EXEMODE)
 INSTALL_DATA=	${INSTALL} -m $(FILEMODE)

 # Use this to make a link between python$(VERSION) and python in $(BINDIR)
 LN=@LN@

 # --with-PACKAGE options for configure script
 # e.g. --with-readline --with-svr5 --with-solaris --with-thread
 # (see README for an explanation)
 WITH=

 # Compiler options passed to subordinate makes
 OPT=		@OPT@

 # Subdirectories where to run make recursively
 SUBDIRS=	Parser Objects Python Modules

 # Other subdirectories
 SUBDIRSTOO=	Include Lib Misc Demo Grammar

 # Files and directories to be distributed
 CONFIGFILES=	configure configure.in acconfig.h config.h.in Makefile.in
 DISTFILES=	README ChangeLog $(CONFIGFILES)
 DISTDIRS=	$(SUBDIRS) $(SUBDIRSTOO) Ext-dummy
 DIST=		$(DISTFILES) $(DISTDIRS)

 # Compilation flags for getbuildinfo.c only
 CFLAGS=		$(OPT) -I. $(DEFS)

 LIBRARY=	libpython$(VERSION).a

 # Default target
 all:		$(LIBRARY) python sharedmods

 # Build the interpreter
 python:		$(LIBRARY) buildno Modules/python.o
 		expr `cat buildno` + 1 >buildno1
 		mv -f buildno1 buildno
 		$(CC) -c $(CFLAGS) -DBUILD=`cat buildno` \
 		      $(srcdir)/Modules/getbuildinfo.c
 		$(AR) cr $(LIBRARY) getbuildinfo.o
 		$(RANLIB) $(LIBRARY)
 		@DGUX_IS_BROKEN@
 		cd Modules;  $(MAKE) OPT="$(OPT)" VERSION="$(VERSION)" \
 			prefix="$(prefix)" exec_prefix="$(exec_prefix)" \
 			LIBRARY=../$(LIBRARY) link

 Modules/python.o: $(srcdir)/Modules/python.c
 		cd Modules; $(MAKE) OPT="$(OPT)" python.o

 buildno:
 		echo 0 >buildno

 # Build the shared modules
 sharedmods: 	python
 		cd Modules;  $(MAKE) OPT="$(OPT)" VERSION="$(VERSION)" \
 			prefix="$(prefix)" exec_prefix="$(exec_prefix)" \
 			sharedmods

 # Build the library
 $(LIBRARY):	$(SUBDIRS)
 		if test ! -f $(LIBRARY); \
 		then for i in $(SUBDIRS); do rm -f $$i/add2lib; done; true; \
 		else true; fi
 		for i in $(SUBDIRS); do \
 			(cd $$i; $(MAKE) VERSION="$(VERSION)" add2lib); done

 # This rule is only here for DG/UX!!!
 libpython$(VERSION).so:	$(LIBRARY)
 		test -d dgux || mkdir dgux
 		(cd dgux;ar x ../$^;ld -G -o ../$@ * )
 		/bin/rm -rf ./dgux

 $(SUBDIRS):	Makefiles

 Parser:
 		cd Parser ; $(MAKE) OPT="$(OPT)" VERSION="$(VERSION)" \
 			prefix="$(prefix)" exec_prefix="$(exec_prefix)" all

 Python:
 		cd Python ; $(MAKE) OPT="$(OPT)" VERSION="$(VERSION)" \
 			prefix="$(prefix)" exec_prefix="$(exec_prefix)" all

 Objects:
 		cd Objects ; $(MAKE) OPT="$(OPT)" VERSION="$(VERSION)" \
 			prefix="$(prefix)" exec_prefix="$(exec_prefix)" all

 Modules:	Parser Python Objects
 		cd Modules ; $(MAKE) OPT="$(OPT)" VERSION="$(VERSION)" \
 			prefix="$(prefix)" exec_prefix="$(exec_prefix)" all

 # Test the interpreter (twice, once without .pyc files, once with)
 TESTOPTS=
 TESTPROG=	$(srcdir)/Lib/test/regrtest.py
 TESTPYTHON=	./python
 test:		python
 		-rm -f $(srcdir)/Lib/test/*.py[co]
 		-PYTHONPATH= $(TESTPYTHON) $(TESTPROG) $(TESTOPTS)
 		PYTHONPATH= $(TESTPYTHON) $(TESTPROG) $(TESTOPTS)

 # Install everything
 install:	altinstall bininstall maninstall

 # Install almost everything without disturbing previous versions
 altinstall:	altbininstall libinstall inclinstall libainstall sharedinstall

 # Install the interpreter (by creating a hard link to python$(VERSION))
 bininstall:	altbininstall
 		-if test -f $(BINDIR)/python; \
 		then rm -f $(BINDIR)/python; \
 		else true; \
 		fi
 		(cd $(BINDIR); $(LN) python$(VERSION)$(EXE) python$(EXE))

 # Install the interpreter with $(VERSION) affixed
 # This goes into $(exec_prefix)
 altbininstall:	python
 		@for i in $(BINDIR); \
 		do \
 			if test ! -d $$i; then \
 				echo "Creating directory $$i"; \
 				mkdir $$i; \
 				chmod $(DIRMODE) $$i; \
 			else	true; \
 			fi; \
 		done
 		$(INSTALL_PROGRAM) python$(EXE) $(BINDIR)/python$(VERSION)$(EXE)
 		@DGUX_IS_BROKEN@
 		if test -f libpython$(VERSION).so; then \
 			$(INSTALL_DATA) libpython$(VERSION).so $(LIBDIR); \
 		else	true; \
 		fi

 # Install the manual page
 maninstall:
 		@for i in $(MANDIR) $(MANDIR)/man1; \
 		do \
 			if test ! -d $$i; then \
 				echo "Creating directory $$i"; \
 				mkdir $$i; \
 				chmod $(DIRMODE) $$i; \
 			else	true; \
 			fi; \
 		done
 		$(INSTALL_DATA) $(srcdir)/Misc/python.man \
 			$(MANDIR)/man1/python.1

 # Install the library
 PLATDIR=	plat-$(MACHDEP)
 MACHDEPS=	$(PLATDIR)
 LIBSUBDIRS=	lib-stdwin lib-tk test test/output $(MACHDEPS)
 libinstall:	python $(srcdir)/Lib/$(PLATDIR)
 		@for i in $(SCRIPTDIR) $(LIBDEST); \
 		do \
 			if test ! -d $$i; then \
 				echo "Creating directory $$i"; \
 				mkdir $$i; \
 				chmod $(DIRMODE) $$i; \
 			else	true; \
 			fi; \
 		done
 		@for d in $(LIBSUBDIRS); \
 		do \
 			a=$(srcdir)/Lib/$$d; \
 			if test ! -d $$a; then continue; else true; fi; \
 			b=$(LIBDEST)/$$d; \
 			if test ! -d $$b; then \
 				echo "Creating directory $$b"; \
 				mkdir $$b; \
 				chmod $(DIRMODE) $$b; \
 			else	true; \
 			fi; \
 		done
 		@for i in $(srcdir)/Lib/*.py $(srcdir)/Lib/*.doc; \
 		do \
 			if test -x $$i; then \
 				$(INSTALL_PROGRAM) $$i $(LIBDEST); \
 				echo $(INSTALL_PROGRAM) $$i $(LIBDEST); \
 			else \
 				$(INSTALL_DATA) $$i $(LIBDEST); \
 				echo $(INSTALL_DATA) $$i $(LIBDEST); \
 			fi; \
 		done
 		@for d in $(LIBSUBDIRS); \
 		do \
 			a=$(srcdir)/Lib/$$d; \
 			if test ! -d $$a; then continue; else true; fi; \
 			b=$(LIBDEST)/$$d; \
 			for i in $$a/*; \
 			do \
 				case $$i in \
 				*CVS) ;; \
 				*.py[co]) ;; \
 				*~) ;; \
 				*) \
 					if test -d $$i; then continue; fi; \
 					if test -x $$i; then \
 					    echo $(INSTALL_PROGRAM) $$i $$b; \
 					    $(INSTALL_PROGRAM) $$i $$b; \
 					else \
 					    echo $(INSTALL_DATA) $$i $$b; \
 					    $(INSTALL_DATA) $$i $$b; \
 					fi;; \
 				esac; \
 			done; \
 		done
 		PYTHONPATH=$(LIBDEST) \
 			./python $(LIBDEST)/compileall.py $(LIBDEST)
 		PYTHONPATH=$(LIBDEST) \
 			./python -O $(LIBDEST)/compileall.py $(LIBDEST)

 # Create the PLATDIR source directory, if one wasn't distributed..
 $(srcdir)/Lib/$(PLATDIR):
 		mkdir $(srcdir)/Lib/$(PLATDIR)
 		cp $(srcdir)/Lib/plat-generic/regen $(srcdir)/Lib/$(PLATDIR)/regen
 		export PATH; PATH="`pwd`:$$PATH"; \
 		export PYTHONPATH; PYTHONPATH="`pwd`/Lib"; \
 		cd $(srcdir)/Lib/$(PLATDIR); ./regen

 # Install the include files
 INCLDIRSTOMAKE=$(INCLUDEDIR) $(CONFINCLUDEDIR) $(INCLUDEPY) $(CONFINCLUDEPY)
 inclinstall:
 		@for i in $(INCLDIRSTOMAKE); \
 		do \
 			if test ! -d $$i; then \
 				echo "Creating directory $$i"; \
 				mkdir $$i; \
 				chmod $(DIRMODE) $$i; \
 			else	true; \
 			fi; \
 		done
 		@for i in $(srcdir)/Include/*.h; \
 		do \
 			echo $(INSTALL_DATA) $$i $(INCLUDEPY); \
 			$(INSTALL_DATA) $$i $(INCLUDEPY); \
 		done
 		$(INSTALL_DATA) config.h $(CONFINCLUDEPY)/config.h

 # Install the library and miscellaneous stuff needed for extending/embedding
 # This goes into $(exec_prefix)
 LIBPL=		$(LIBP)/config
 libainstall:	all
 		@for i in $(LIBDIR) $(LIBP) $(LIBPL); \
 		do \
 			if test ! -d $$i; then \
 				echo "Creating directory $$i"; \
 				mkdir $$i; \
 				chmod $(DIRMODE) $$i; \
 			else	true; \
 			fi; \
 		done
 		@if [ "$(MACHDEP)" != "beos" ] ; then \
 			$(INSTALL_DATA) $(LIBRARY) $(LIBPL)/$(LIBRARY) ; \
 			$(RANLIB) $(LIBPL)/$(LIBRARY) ; \
 		fi
 		$(INSTALL_DATA) Modules/config.c $(LIBPL)/config.c
 		$(INSTALL_DATA) Modules/python.o $(LIBPL)/python.o
 		$(INSTALL_DATA) $(srcdir)/Modules/config.c.in $(LIBPL)/config.c.in
 		$(INSTALL_DATA) Modules/Makefile $(LIBPL)/Makefile
 		$(INSTALL_DATA) Modules/Setup $(LIBPL)/Setup
 		$(INSTALL_DATA) Modules/Setup.local $(LIBPL)/Setup.local
 		$(INSTALL_DATA) Modules/Setup.thread $(LIBPL)/Setup.thread
 		$(INSTALL_PROGRAM) $(srcdir)/Modules/makesetup $(LIBPL)/makesetup
 		$(INSTALL_PROGRAM) $(srcdir)/install-sh $(LIBPL)/install-sh
 		$(INSTALL_DATA) $(srcdir)/Misc/Makefile.pre.in $(LIBPL)/Makefile.pre.in
 		@if [ -s Modules/python.exp -a \
 			"`echo $(MACHDEP) | sed 's/^\(...\).*/\1/'`" = "aix" ]; then \
 			echo; echo "Installing support files for building shared extension modules on AIX:"; \
 			$(INSTALL_DATA) Modules/python.exp		\
 					$(LIBPL)/python.exp;		\
 			echo; echo "$(LIBPL)/python.exp";		\
 			$(INSTALL_PROGRAM) $(srcdir)/Modules/makexp_aix	\
 					$(LIBPL)/makexp_aix;		\
 			echo "$(LIBPL)/makexp_aix";			\
 			$(INSTALL_PROGRAM) $(srcdir)/Modules/ld_so_aix	\
 					$(LIBPL)/ld_so_aix;		\
 			echo "$(LIBPL)/ld_so_aix";			\
 			echo; echo "See Misc/AIX-NOTES for details.";	\
 		else true; \
 		fi

 # Install the dynamically loadable modules
 # This goes into $(exec_prefix)
 sharedinstall:
 		cd Modules; $(MAKE) \
 			OPT="$(OPT)" \
 			VERSION="$(VERSION)" \
 			SO="$(SO)" \
 			LDSHARED="$(LDSHARED)" \
 			CCSHARED="$(CCSHARED)" \
 			LINKFORSHARED="$(LINKFORSHARED)" \
 			DESTSHARED="$(DESTSHARED)" \
 			prefix="$(prefix)" \
 			exec_prefix="$(exec_prefix)" \
 			sharedinstall

 # Build the sub-Makefiles
 Makefiles:	config.status Modules/Makefile.pre
 		(cd Modules; $(MAKE) -f Makefile.pre Makefile)
 		@for i in . $(SUBDIRS); do \
 			(echo making Makefile in subdirectory $$i; cd $$i; \
 			 $(MAKE) Makefile); \
 		done
 		-(rm -f Modules/hassignal; cd Modules; $(MAKE) hassignal)

 # Build the intermediate Makefile in Modules
 Modules/Makefile.pre: config.status
 		$(SHELL) config.status

 # Build the toplevel Makefile
 Makefile:	Makefile.in config.status
 		CONFIG_FILES=Makefile CONFIG_HEADERS= $(SHELL) config.status

 # Run the configure script.  If config.status already exists,
 # call it with the --recheck argument, which reruns configure with the
 # same options as it was run last time; otherwise run the configure
 # script with options taken from the $(WITH) variable
 config.status:	$(srcdir)/configure
 		if test -f config.status; \
 		then $(SHELL) config.status --recheck; \
 		     $(SHELL) config.status; \
 		else $(SHELL) $(srcdir)/configure $(WITH); \
 		fi

 .PRECIOUS:	config.status python

 # Rerun configure with the same options as it was run last time,
 # provided the config.status script exists
 recheck:
 		$(SHELL) config.status --recheck
 		$(SHELL) config.status

 # Rebuild the configure script from configure.in; also rebuild config.h.in
 autoconf:
 		(cd $(srcdir); autoconf)
 		(cd $(srcdir); autoheader)

 # Create a tags file for vi
 tags::
 		ctags -w -t Include/*.h
 		for i in $(SUBDIRS); do ctags -w -t -a $$i/*.[ch]; done
 		sort tags -o tags

 # Create a tags file for GNU Emacs
 TAGS::
 		etags Include/*.h
 		for i in $(SUBDIRS); do etags -a $$i/*.[ch]; done

 # Add dependencies to sub-Makefiles
 depend:
 		@for i in $(SUBDIRS); do \
 			(echo making depend in subdirectory $$i; cd $$i; \
 			 $(MAKE) depend); \
 		done

 # Sanitation targets -- clean leaves libraries, executables and tags
 # files, which clobber removes those as well

 localclean:
 		-rm -f core *~ [@,#]* *.old *.orig *.rej

 clean:		localclean
 		-for i in $(SUBDIRS); do \
 		    if test -d $$i; then \
 			(echo making clean in subdirectory $$i; cd $$i; \
 			 if test -f Makefile; \
 			 then $(MAKE) clean; \
 			 else $(MAKE) -f Makefile.*in clean; \
 			 fi); \
 		    else true; fi; \
 		done

 localclobber:	localclean
 		-rm -f tags TAGS python $(LIBRARY) *.o
 		-rm -f config.log config.cache config.h

 clobber:	localclobber
 		-for i in $(SUBDIRS); do \
 		    if test -d $$i; then \
 			(echo clobbering subdirectory $$i; cd $$i; \
 			 if test -f Makefile; \
 			 then $(MAKE) clobber; \
 			 else $(MAKE) -f $(srcdir)/Makefile*.in clobber; \
 			 fi); \
 		    else true; fi; \
 		done

 # Make things extra clean, before making a distribution:
 # remove all generated files, even Makefile[.pre]
 distclean:	clobber
 		-$(MAKE) -f $(srcdir)/Makefile.in \
 			SUBDIRS="$(SUBDIRSTOO)" clobber
 		-rm -f config.status config.log config.cache config.h Makefile
 		-rm -f buildno
 		-rm -f Modules/Makefile
 		-for i in $(SUBDIRS) $(SUBDIRSTOO); do \
 			 for f in $$i/*.in; do \
 				f=`basename "$$f" .in`; \
 			 	if test "$$f" != "*"; then \
 					echo rm -f "$$i/$$f"; \
 				 	rm -f "$$i/$$f"; \
 				fi; \
 			 done; \
 		done

 # Check for smelly exported symbols (not starting with Py/_Py)
 smelly: all
 	for i in $(SUBDIRS); do \
 		echo --- $$i ---; \
 		nm -p $$i/lib$$i.a | \
 		sed -n "/ [TDB] /s/.* //p" | grep -v "^_*Py" | sort -u; \
 	done

 # Find files with funny names
 funny:
 		find $(DISTDIRS) -type d \
 			-o -name '*.[chs]' \
 			-o -name '*.py' \
 			-o -name '*.doc' \
 			-o -name '*.sty' \
 			-o -name '*.bib' \
 			-o -name '*.dat' \
 			-o -name '*.el' \
 			-o -name '*.fd' \
 			-o -name '*.in' \
 			-o -name '*.tex' \
 			-o -name '*,[vpt]' \
 			-o -name 'Setup' \
 			-o -name 'Setup.*' \
 			-o -name README \
 			-o -name Makefile \
 			-o -name ChangeLog \
 			-o -name Repository \
 			-o -name Root \
 			-o -name Entries \
 			-o -name Tag \
 			-o -name tags \
 			-o -name TAGS \
 			-o -name .cvsignore \
 			-o -name MANIFEST \
 			-o -print
	########################################################################
	# Copyright 1991-1995 by Stichting Mathematisch Centrum, Amsterdam,
	# The Netherlands.
	#
	# All Rights Reserved
	#
	# Permission to use, copy, modify, and distribute this software and its
	# documentation for any purpose and without fee is hereby granted,
	# provided that the above copyright notice appear in all copies and that
	# both that copyright notice and this permission notice appear in
	# supporting documentation, and that the names of Stichting Mathematisch
	# Centrum or CWI or Corporation for National Research Initiatives or
	# CNRI not be used in advertising or publicity pertaining to
	# distribution of the software without specific, written prior
	# permission.
	#
	# While CWI is the initial source for this software, a modified version
	# is made available by the Corporation for National Research Initiatives
	# (CNRI) at the Internet address ftp://ftp.python.org.
	#
	# STICHTING MATHEMATISCH CENTRUM AND CNRI DISCLAIM ALL WARRANTIES WITH
	# REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF
	# MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL STICHTING MATHEMATISCH
	# CENTRUM OR CNRI BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
	# DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
	# PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
	# TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
	# PERFORMANCE OF THIS SOFTWARE.
	########################################################################

	# Top-level Makefile for Python
	#
	# As distributed, this file is called Makefile.in; it is processed
	# into the real Makefile by running the script ./configure, which
	# replaces things like @spam@ with values appropriate for your system.
	# This means that if you edit Makefile, your changes get lost the next
	# time you run the configure script. Ideally, you can do:
	#
	# ./configure
	# make
	# make test
	# make install
	#
	# The top-level Makefile invokes make recursively in a number of
	# subdirectories (see the SUBDIRS variable below). If you want to,
	# you can invoke make in individual subdirectories. However, the
	# sub-Makefiles are also generated by configure, and the quickest way
	# to make sure they are up to date is by running make (or "make
	# Makefiles") at the top level. This is particularly important for
	# Modules/Makefile, which has to be regenerated every time you edit
	# Modules/Setup. The python executable is built in the Modules
	# directory and then moved to the top-level directory. The recursive
	# makes pass three options to subordinate makes: OPT (a quick way to
	# change some compiler options; it usually defaults to -O), prefix and
	# exec_prefix (the installation paths).
	#
	# If you have a previous version of Python installed that you don't
	# want to overwrite, you can use "make altinstall" instead of "make
	# install". This changes the install procedure so it installs the
	# Python binary as "python<version>". The libraries and include files
	# are always installed in a subdirectory called "python<version>".
	# "make altinstall" does not install the manual page. If you want to
	# make this installation the "official" installation but want to keep
	# the old binary around "just in case", rename the installed python
	# binary to "python<oldversion>" before running "make install".
	# (This only works between different versions, e.g. 1.3 and 1.4 --
	# different betas of the same version will overwrite each other in
	# installation unless you override the VERSION Make variable.)
	#
	# In fact, "make install" or "make bininstall" installs the binary
	# as python<version> and makes a hard link to python, so when
	# installing a new version in the future, nothing of the current
	# version will be lost (except for the man page).
	#
	# If recursive makes fail, try invoking make as "make MAKE=make".
	#
	# See also the section "Build instructions" in the README file.

	# Substitutions by configure
	VERSION= @VERSION@
	srcdir= @srcdir@
	VPATH= @srcdir@
	CC= @CC@
	AR= @AR@
	RANLIB= @RANLIB@
	DEFS= @DEFS@

	# Machine-dependent subdirectories
	MACHDEP= @MACHDEP@

	# Install prefix for architecture-independent files
	prefix= @prefix@

	# Install prefix for architecture-dependent files
	exec_prefix= @exec_prefix@

	# Expanded directories
	BINDIR= $(exec_prefix)/bin
	LIBDIR= $(exec_prefix)/lib
	MANDIR= $(prefix)/man
	INCLUDEDIR= $(prefix)/include
	CONFINCLUDEDIR= $(exec_prefix)/include
	SCRIPTDIR= $(prefix)/lib

	# Detailed destination directories
	BINLIBDEST= $(LIBDIR)/python$(VERSION)
	LIBDEST= $(SCRIPTDIR)/python$(VERSION)
	INCLUDEPY= $(INCLUDEDIR)/python$(VERSION)
	CONFINCLUDEPY= $(CONFINCLUDEDIR)/python$(VERSION)
	LIBP= $(LIBDIR)/python$(VERSION)

	# Symbols used for using shared libraries
	SO= @SO@
	LDSHARED= @LDSHARED@
	CCSHARED= @CCSHARED@
	LINKFORSHARED= @LINKFORSHARED@
	DESTSHARED= $(BINLIBDEST)/lib-dynload

	# Shell used by make (some versions default to the login shell, which is bad)
	SHELL= /bin/sh

	# Use ``EXE=.exe'' for Unix emulations on DOS/Windows (e.g. GNUWIN32)
	EXE=

	# Modes for directories, executables and data files created by the
	# install process. Default to group-writable directories but
	# user-only-writable for executables and data files.
	DIRMODE= 775
	EXEMODE= 755
	FILEMODE= 644

	# Portable install script (configure doesn't always guess right)
	INSTALL= @srcdir@/install-sh -c
	INSTALL_PROGRAM=${INSTALL} -m $(EXEMODE)
	INSTALL_DATA= ${INSTALL} -m $(FILEMODE)

	# Use this to make a link between python$(VERSION) and python in $(BINDIR)
	LN=@LN@

	# --with-PACKAGE options for configure script
	# e.g. --with-readline --with-svr5 --with-solaris --with-thread
	# (see README for an explanation)
	WITH=

	# Compiler options passed to subordinate makes
	OPT= @OPT@

	# Subdirectories where to run make recursively
	SUBDIRS= Parser Objects Python Modules

	# Other subdirectories
	SUBDIRSTOO= Include Lib Misc Demo Grammar

	# Files and directories to be distributed
	CONFIGFILES= configure configure.in acconfig.h config.h.in Makefile.in
	DISTFILES= README ChangeLog $(CONFIGFILES)
	DISTDIRS= $(SUBDIRS) $(SUBDIRSTOO) Ext-dummy
	DIST= $(DISTFILES) $(DISTDIRS)

	# Compilation flags for getbuildinfo.c only
	CFLAGS= $(OPT) -I. $(DEFS)

	LIBRARY= libpython$(VERSION).a

	# Default target
	all: $(LIBRARY) python sharedmods

	# Build the interpreter
	python: $(LIBRARY) buildno Modules/python.o
	expr `cat buildno` + 1 >buildno1
	mv -f buildno1 buildno
	$(CC) -c $(CFLAGS) -DBUILD=`cat buildno` \
	$(srcdir)/Modules/getbuildinfo.c
	$(AR) cr $(LIBRARY) getbuildinfo.o
	$(RANLIB) $(LIBRARY)
	@DGUX_IS_BROKEN@
	cd Modules; $(MAKE) OPT="$(OPT)" VERSION="$(VERSION)" \
	prefix="$(prefix)" exec_prefix="$(exec_prefix)" \
	LIBRARY=../$(LIBRARY) link

	Modules/python.o: $(srcdir)/Modules/python.c
	cd Modules; $(MAKE) OPT="$(OPT)" python.o

	buildno:
	echo 0 >buildno

	# Build the shared modules
	sharedmods: python
	cd Modules; $(MAKE) OPT="$(OPT)" VERSION="$(VERSION)" \
	prefix="$(prefix)" exec_prefix="$(exec_prefix)" \
	sharedmods

	# Build the library
	$(LIBRARY): $(SUBDIRS)
	if test ! -f $(LIBRARY); \
	then for i in $(SUBDIRS); do rm -f $$i/add2lib; done; true; \
	else true; fi
	for i in $(SUBDIRS); do \
	(cd $$i; $(MAKE) VERSION="$(VERSION)" add2lib); done

	# This rule is only here for DG/UX!!!
	libpython$(VERSION).so: $(LIBRARY)
	test -d dgux \|\| mkdir dgux
	(cd dgux;ar x ../$^;ld -G -o ../$@ * )
	/bin/rm -rf ./dgux

	$(SUBDIRS): Makefiles

	Parser:
	cd Parser ; $(MAKE) OPT="$(OPT)" VERSION="$(VERSION)" \
	prefix="$(prefix)" exec_prefix="$(exec_prefix)" all

	Python:
	cd Python ; $(MAKE) OPT="$(OPT)" VERSION="$(VERSION)" \
	prefix="$(prefix)" exec_prefix="$(exec_prefix)" all

	Objects:
	cd Objects ; $(MAKE) OPT="$(OPT)" VERSION="$(VERSION)" \
	prefix="$(prefix)" exec_prefix="$(exec_prefix)" all

	Modules: Parser Python Objects
	cd Modules ; $(MAKE) OPT="$(OPT)" VERSION="$(VERSION)" \
	prefix="$(prefix)" exec_prefix="$(exec_prefix)" all

	# Test the interpreter (twice, once without .pyc files, once with)
	TESTOPTS=
	TESTPROG= $(srcdir)/Lib/test/regrtest.py
	TESTPYTHON= ./python
	test: python
	-rm -f $(srcdir)/Lib/test/*.py[co]
	-PYTHONPATH= $(TESTPYTHON) $(TESTPROG) $(TESTOPTS)
	PYTHONPATH= $(TESTPYTHON) $(TESTPROG) $(TESTOPTS)

	# Install everything
	install: altinstall bininstall maninstall

	# Install almost everything without disturbing previous versions
	altinstall: altbininstall libinstall inclinstall libainstall sharedinstall

	# Install the interpreter (by creating a hard link to python$(VERSION))
	bininstall: altbininstall
	-if test -f $(BINDIR)/python; \
	then rm -f $(BINDIR)/python; \
	else true; \
	fi
	(cd $(BINDIR); $(LN) python$(VERSION)$(EXE) python$(EXE))

	# Install the interpreter with $(VERSION) affixed
	# This goes into $(exec_prefix)
	altbininstall: python
	@for i in $(BINDIR); \
	do \
	if test ! -d $$i; then \
	echo "Creating directory $$i"; \
	mkdir $$i; \
	chmod $(DIRMODE) $$i; \
	else true; \
	fi; \
	done
	$(INSTALL_PROGRAM) python$(EXE) $(BINDIR)/python$(VERSION)$(EXE)
	@DGUX_IS_BROKEN@
	if test -f libpython$(VERSION).so; then \
	$(INSTALL_DATA) libpython$(VERSION).so $(LIBDIR); \
	else true; \
	fi

	# Install the manual page
	maninstall:
	@for i in $(MANDIR) $(MANDIR)/man1; \
	do \
	if test ! -d $$i; then \
	echo "Creating directory $$i"; \
	mkdir $$i; \
	chmod $(DIRMODE) $$i; \
	else true; \
	fi; \
	done
	$(INSTALL_DATA) $(srcdir)/Misc/python.man \
	$(MANDIR)/man1/python.1

	# Install the library
	PLATDIR= plat-$(MACHDEP)
	MACHDEPS= $(PLATDIR)
	LIBSUBDIRS= lib-stdwin lib-tk test test/output $(MACHDEPS)
	libinstall: python $(srcdir)/Lib/$(PLATDIR)
	@for i in $(SCRIPTDIR) $(LIBDEST); \
	do \
	if test ! -d $$i; then \
	echo "Creating directory $$i"; \
	mkdir $$i; \
	chmod $(DIRMODE) $$i; \
	else true; \
	fi; \
	done
	@for d in $(LIBSUBDIRS); \
	do \
	a=$(srcdir)/Lib/$$d; \
	if test ! -d $$a; then continue; else true; fi; \
	b=$(LIBDEST)/$$d; \
	if test ! -d $$b; then \
	echo "Creating directory $$b"; \
	mkdir $$b; \
	chmod $(DIRMODE) $$b; \
	else true; \
	fi; \
	done
	@for i in $(srcdir)/Lib/.py $(srcdir)/Lib/.doc; \
	do \
	if test -x $$i; then \
	$(INSTALL_PROGRAM) $$i $(LIBDEST); \
	echo $(INSTALL_PROGRAM) $$i $(LIBDEST); \
	else \
	$(INSTALL_DATA) $$i $(LIBDEST); \
	echo $(INSTALL_DATA) $$i $(LIBDEST); \
	fi; \
	done
	@for d in $(LIBSUBDIRS); \
	do \
	a=$(srcdir)/Lib/$$d; \
	if test ! -d $$a; then continue; else true; fi; \
	b=$(LIBDEST)/$$d; \
	for i in $$a/*; \
	do \
	case $$i in \
	*CVS) ;; \
	*.py[co]) ;; \
	*~) ;; \
	*) \
	if test -d $$i; then continue; fi; \
	if test -x $$i; then \
	echo $(INSTALL_PROGRAM) $$i $$b; \
	$(INSTALL_PROGRAM) $$i $$b; \
	else \
	echo $(INSTALL_DATA) $$i $$b; \
	$(INSTALL_DATA) $$i $$b; \
	fi;; \
	esac; \
	done; \
	done
	PYTHONPATH=$(LIBDEST) \
	./python $(LIBDEST)/compileall.py $(LIBDEST)
	PYTHONPATH=$(LIBDEST) \
	./python -O $(LIBDEST)/compileall.py $(LIBDEST)

	# Create the PLATDIR source directory, if one wasn't distributed..
	$(srcdir)/Lib/$(PLATDIR):
	mkdir $(srcdir)/Lib/$(PLATDIR)
	cp $(srcdir)/Lib/plat-generic/regen $(srcdir)/Lib/$(PLATDIR)/regen
	export PATH; PATH="`pwd`:$$PATH"; \
	export PYTHONPATH; PYTHONPATH="`pwd`/Lib"; \
	cd $(srcdir)/Lib/$(PLATDIR); ./regen

	# Install the include files
	INCLDIRSTOMAKE=$(INCLUDEDIR) $(CONFINCLUDEDIR) $(INCLUDEPY) $(CONFINCLUDEPY)
	inclinstall:
	@for i in $(INCLDIRSTOMAKE); \
	do \
	if test ! -d $$i; then \
	echo "Creating directory $$i"; \
	mkdir $$i; \
	chmod $(DIRMODE) $$i; \
	else true; \
	fi; \
	done
	@for i in $(srcdir)/Include/*.h; \
	do \
	echo $(INSTALL_DATA) $$i $(INCLUDEPY); \
	$(INSTALL_DATA) $$i $(INCLUDEPY); \
	done
	$(INSTALL_DATA) config.h $(CONFINCLUDEPY)/config.h

	# Install the library and miscellaneous stuff needed for extending/embedding
	# This goes into $(exec_prefix)
	LIBPL= $(LIBP)/config
	libainstall: all
	@for i in $(LIBDIR) $(LIBP) $(LIBPL); \
	do \
	if test ! -d $$i; then \
	echo "Creating directory $$i"; \
	mkdir $$i; \
	chmod $(DIRMODE) $$i; \
	else true; \
	fi; \
	done
	@if [ "$(MACHDEP)" != "beos" ] ; then \
	$(INSTALL_DATA) $(LIBRARY) $(LIBPL)/$(LIBRARY) ; \
	$(RANLIB) $(LIBPL)/$(LIBRARY) ; \
	fi
	$(INSTALL_DATA) Modules/config.c $(LIBPL)/config.c
	$(INSTALL_DATA) Modules/python.o $(LIBPL)/python.o
	$(INSTALL_DATA) $(srcdir)/Modules/config.c.in $(LIBPL)/config.c.in
	$(INSTALL_DATA) Modules/Makefile $(LIBPL)/Makefile
	$(INSTALL_DATA) Modules/Setup $(LIBPL)/Setup
	$(INSTALL_DATA) Modules/Setup.local $(LIBPL)/Setup.local
	$(INSTALL_DATA) Modules/Setup.thread $(LIBPL)/Setup.thread
	$(INSTALL_PROGRAM) $(srcdir)/Modules/makesetup $(LIBPL)/makesetup
	$(INSTALL_PROGRAM) $(srcdir)/install-sh $(LIBPL)/install-sh
	$(INSTALL_DATA) $(srcdir)/Misc/Makefile.pre.in $(LIBPL)/Makefile.pre.in
	@if [ -s Modules/python.exp -a \
	"`echo $(MACHDEP) \| sed 's/^\(...\).*/\1/'`" = "aix" ]; then \
	echo; echo "Installing support files for building shared extension modules on AIX:"; \
	$(INSTALL_DATA) Modules/python.exp \
	$(LIBPL)/python.exp; \
	echo; echo "$(LIBPL)/python.exp"; \
	$(INSTALL_PROGRAM) $(srcdir)/Modules/makexp_aix \
	$(LIBPL)/makexp_aix; \
	echo "$(LIBPL)/makexp_aix"; \
	$(INSTALL_PROGRAM) $(srcdir)/Modules/ld_so_aix \
	$(LIBPL)/ld_so_aix; \
	echo "$(LIBPL)/ld_so_aix"; \
	echo; echo "See Misc/AIX-NOTES for details."; \
	else true; \
	fi

	# Install the dynamically loadable modules
	# This goes into $(exec_prefix)
	sharedinstall:
	cd Modules; $(MAKE) \
	OPT="$(OPT)" \
	VERSION="$(VERSION)" \
	SO="$(SO)" \
	LDSHARED="$(LDSHARED)" \
	CCSHARED="$(CCSHARED)" \
	LINKFORSHARED="$(LINKFORSHARED)" \
	DESTSHARED="$(DESTSHARED)" \
	prefix="$(prefix)" \
	exec_prefix="$(exec_prefix)" \
	sharedinstall

	# Build the sub-Makefiles
	Makefiles: config.status Modules/Makefile.pre
	(cd Modules; $(MAKE) -f Makefile.pre Makefile)
	@for i in . $(SUBDIRS); do \
	(echo making Makefile in subdirectory $$i; cd $$i; \
	$(MAKE) Makefile); \
	done
	-(rm -f Modules/hassignal; cd Modules; $(MAKE) hassignal)

	# Build the intermediate Makefile in Modules
	Modules/Makefile.pre: config.status
	$(SHELL) config.status

	# Build the toplevel Makefile
	Makefile: Makefile.in config.status
	CONFIG_FILES=Makefile CONFIG_HEADERS= $(SHELL) config.status

	# Run the configure script. If config.status already exists,
	# call it with the --recheck argument, which reruns configure with the
	# same options as it was run last time; otherwise run the configure
	# script with options taken from the $(WITH) variable
	config.status: $(srcdir)/configure
	if test -f config.status; \
	then $(SHELL) config.status --recheck; \
	$(SHELL) config.status; \
	else $(SHELL) $(srcdir)/configure $(WITH); \
	fi

	.PRECIOUS: config.status python

	# Rerun configure with the same options as it was run last time,
	# provided the config.status script exists
	recheck:
	$(SHELL) config.status --recheck
	$(SHELL) config.status

	# Rebuild the configure script from configure.in; also rebuild config.h.in
	autoconf:
	(cd $(srcdir); autoconf)
	(cd $(srcdir); autoheader)

	# Create a tags file for vi
	tags::
	ctags -w -t Include/*.h
	for i in $(SUBDIRS); do ctags -w -t -a $$i/*.[ch]; done
	sort tags -o tags

	# Create a tags file for GNU Emacs
	TAGS::
	etags Include/*.h
	for i in $(SUBDIRS); do etags -a $$i/*.[ch]; done

	# Add dependencies to sub-Makefiles
	depend:
	@for i in $(SUBDIRS); do \
	(echo making depend in subdirectory $$i; cd $$i; \
	$(MAKE) depend); \
	done

	# Sanitation targets -- clean leaves libraries, executables and tags
	# files, which clobber removes those as well

	localclean:
	-rm -f core ~ [@,#] .old .orig *.rej

	clean: localclean
	-for i in $(SUBDIRS); do \
	if test -d $$i; then \
	(echo making clean in subdirectory $$i; cd $$i; \
	if test -f Makefile; \
	then $(MAKE) clean; \
	else $(MAKE) -f Makefile.*in clean; \
	fi); \
	else true; fi; \
	done

	localclobber: localclean
	-rm -f tags TAGS python $(LIBRARY) *.o
	-rm -f config.log config.cache config.h

	clobber: localclobber
	-for i in $(SUBDIRS); do \
	if test -d $$i; then \
	(echo clobbering subdirectory $$i; cd $$i; \
	if test -f Makefile; \
	then $(MAKE) clobber; \
	else $(MAKE) -f $(srcdir)/Makefile*.in clobber; \
	fi); \
	else true; fi; \
	done

	# Make things extra clean, before making a distribution:
	# remove all generated files, even Makefile[.pre]
	distclean: clobber
	-$(MAKE) -f $(srcdir)/Makefile.in \
	SUBDIRS="$(SUBDIRSTOO)" clobber
	-rm -f config.status config.log config.cache config.h Makefile
	-rm -f buildno
	-rm -f Modules/Makefile
	-for i in $(SUBDIRS) $(SUBDIRSTOO); do \
	for f in $$i/*.in; do \
	f=`basename "$$f" .in`; \
	if test "$$f" != "*"; then \
	echo rm -f "$$i/$$f"; \
	rm -f "$$i/$$f"; \
	fi; \
	done; \
	done

	# Check for smelly exported symbols (not starting with Py/_Py)
	smelly: all
	for i in $(SUBDIRS); do \
	echo --- $$i ---; \
	nm -p $$i/lib$$i.a \| \
	sed -n "/ [TDB] /s/.* //p" \| grep -v "^_*Py" \| sort -u; \
	done

	# Find files with funny names
	funny:
	find $(DISTDIRS) -type d \
	-o -name '*.[chs]' \
	-o -name '*.py' \
	-o -name '*.doc' \
	-o -name '*.sty' \
	-o -name '*.bib' \
	-o -name '*.dat' \
	-o -name '*.el' \
	-o -name '*.fd' \
	-o -name '*.in' \
	-o -name '*.tex' \
	-o -name '*,[vpt]' \
	-o -name 'Setup' \
	-o -name 'Setup.*' \
	-o -name README \
	-o -name Makefile \
	-o -name ChangeLog \
	-o -name Repository \
	-o -name Root \
	-o -name Entries \
	-o -name Tag \
	-o -name tags \
	-o -name TAGS \
	-o -name .cvsignore \
	-o -name MANIFEST \
	-o -print