| """Functions that read and write gzipped files. |
| |
| The user of the file doesn't have to worry about the compression, |
| but random access is not allowed.""" |
| |
| # based on Andrew Kuchling's minigzip.py distributed with the zlib module |
| |
| import struct, sys, time, os |
| import zlib |
| import builtins |
| import io |
| |
| __all__ = ["GzipFile", "open", "compress", "decompress"] |
| |
| FTEXT, FHCRC, FEXTRA, FNAME, FCOMMENT = 1, 2, 4, 8, 16 |
| |
| READ, WRITE = 1, 2 |
| |
| def U32(i): |
| """Return i as an unsigned integer, assuming it fits in 32 bits. |
| If it's >= 2GB when viewed as a 32-bit unsigned int, return a long. |
| """ |
| if i < 0: |
| i += 1 << 32 |
| return i |
| |
| def LOWU32(i): |
| """Return the low-order 32 bits, as a non-negative int""" |
| return i & 0xFFFFFFFF |
| |
| def write32u(output, value): |
| # The L format writes the bit pattern correctly whether signed |
| # or unsigned. |
| output.write(struct.pack("<L", value)) |
| |
| def read32(input): |
| return struct.unpack("<I", input.read(4))[0] |
| |
| def open(filename, mode="rb", compresslevel=9): |
| """Shorthand for GzipFile(filename, mode, compresslevel). |
| |
| The filename argument is required; mode defaults to 'rb' |
| and compresslevel defaults to 9. |
| |
| """ |
| return GzipFile(filename, mode, compresslevel) |
| |
| class _PaddedFile: |
| """Minimal read-only file object that prepends a string to the contents |
| of an actual file. Shouldn't be used outside of gzip.py, as it lacks |
| essential functionality.""" |
| |
| def __init__(self, f, prepend=b''): |
| self._buffer = prepend |
| self._length = len(prepend) |
| self.file = f |
| self._read = 0 |
| |
| def read(self, size): |
| if self._read is None: |
| return self.file.read(size) |
| if self._read + size <= self._length: |
| read = self._read |
| self._read += size |
| return self._buffer[read:self._read] |
| else: |
| read = self._read |
| self._read = None |
| return self._buffer[read:] + \ |
| self.file.read(size-self._length+read) |
| |
| def prepend(self, prepend=b'', readprevious=False): |
| if self._read is None: |
| self._buffer = prepend |
| elif readprevious and len(prepend) <= self._read: |
| self._read -= len(prepend) |
| return |
| else: |
| self._buffer = self._buffer[read:] + prepend |
| self._length = len(self._buffer) |
| self._read = 0 |
| |
| def unused(self): |
| if self._read is None: |
| return b'' |
| return self._buffer[self._read:] |
| |
| def seek(self, offset, whence=0): |
| # This is only ever called with offset=whence=0 |
| if whence == 1 and self._read is not None: |
| if 0 <= offset + self._read <= self._length: |
| self._read += offset |
| return |
| else: |
| offset += self._length - self._read |
| self._read = None |
| self._buffer = None |
| return self.file.seek(offset, whence) |
| |
| def __getattr__(self, name): |
| return getattr(self.file, name) |
| |
| |
| class GzipFile(io.BufferedIOBase): |
| """The GzipFile class simulates most of the methods of a file object with |
| the exception of the readinto() and truncate() methods. |
| |
| This class only supports opening files in binary mode. If you need to open a |
| compressed file in text mode, wrap your GzipFile with an io.TextIOWrapper. |
| |
| """ |
| |
| myfileobj = None |
| max_read_chunk = 10 * 1024 * 1024 # 10Mb |
| |
| def __init__(self, filename=None, mode=None, |
| compresslevel=9, fileobj=None, mtime=None): |
| """Constructor for the GzipFile class. |
| |
| At least one of fileobj and filename must be given a |
| non-trivial value. |
| |
| The new class instance is based on fileobj, which can be a regular |
| file, a StringIO object, or any other object which simulates a file. |
| It defaults to None, in which case filename is opened to provide |
| a file object. |
| |
| When fileobj is not None, the filename argument is only used to be |
| included in the gzip file header, which may includes the original |
| filename of the uncompressed file. It defaults to the filename of |
| fileobj, if discernible; otherwise, it defaults to the empty string, |
| and in this case the original filename is not included in the header. |
| |
| The mode argument can be any of 'r', 'rb', 'a', 'ab', 'w', or 'wb', |
| depending on whether the file will be read or written. The default |
| is the mode of fileobj if discernible; otherwise, the default is 'rb'. |
| A mode of 'r' is equivalent to one of 'rb', and similarly for 'w' and |
| 'wb', and 'a' and 'ab'. |
| |
| The compresslevel argument is an integer from 1 to 9 controlling the |
| level of compression; 1 is fastest and produces the least compression, |
| and 9 is slowest and produces the most compression. The default is 9. |
| |
| The mtime argument is an optional numeric timestamp to be written |
| to the stream when compressing. All gzip compressed streams |
| are required to contain a timestamp. If omitted or None, the |
| current time is used. This module ignores the timestamp when |
| decompressing; however, some programs, such as gunzip, make use |
| of it. The format of the timestamp is the same as that of the |
| return value of time.time() and of the st_mtime member of the |
| object returned by os.stat(). |
| |
| """ |
| |
| if mode and ('t' in mode or 'U' in mode): |
| raise IOError("Mode " + mode + " not supported") |
| if mode and 'b' not in mode: |
| mode += 'b' |
| if fileobj is None: |
| fileobj = self.myfileobj = builtins.open(filename, mode or 'rb') |
| if filename is None: |
| if hasattr(fileobj, 'name') and isinstance(fileobj.name, str): |
| filename = fileobj.name |
| else: |
| filename = '' |
| if mode is None: |
| if hasattr(fileobj, 'mode'): mode = fileobj.mode |
| else: mode = 'rb' |
| |
| if mode[0:1] == 'r': |
| self.mode = READ |
| # Set flag indicating start of a new member |
| self._new_member = True |
| # Buffer data read from gzip file. extrastart is offset in |
| # stream where buffer starts. extrasize is number of |
| # bytes remaining in buffer from current stream position. |
| self.extrabuf = b"" |
| self.extrasize = 0 |
| self.extrastart = 0 |
| self.name = filename |
| # Starts small, scales exponentially |
| self.min_readsize = 100 |
| fileobj = _PaddedFile(fileobj) |
| |
| elif mode[0:1] == 'w' or mode[0:1] == 'a': |
| self.mode = WRITE |
| self._init_write(filename) |
| self.compress = zlib.compressobj(compresslevel, |
| zlib.DEFLATED, |
| -zlib.MAX_WBITS, |
| zlib.DEF_MEM_LEVEL, |
| 0) |
| else: |
| raise IOError("Mode " + mode + " not supported") |
| |
| self.fileobj = fileobj |
| self.offset = 0 |
| self.mtime = mtime |
| |
| if self.mode == WRITE: |
| self._write_gzip_header() |
| |
| @property |
| def filename(self): |
| import warnings |
| warnings.warn("use the name attribute", DeprecationWarning, 2) |
| if self.mode == WRITE and self.name[-3:] != ".gz": |
| return self.name + ".gz" |
| return self.name |
| |
| def __repr__(self): |
| fileobj = self.fileobj |
| if isinstance(fileobj, _PaddedFile): |
| fileobj = fileobj.file |
| s = repr(fileobj) |
| return '<gzip ' + s[1:-1] + ' ' + hex(id(self)) + '>' |
| |
| def _check_closed(self): |
| """Raises a ValueError if the underlying file object has been closed. |
| |
| """ |
| if self.closed: |
| raise ValueError('I/O operation on closed file.') |
| |
| def _init_write(self, filename): |
| self.name = filename |
| self.crc = zlib.crc32(b"") & 0xffffffff |
| self.size = 0 |
| self.writebuf = [] |
| self.bufsize = 0 |
| |
| def _write_gzip_header(self): |
| self.fileobj.write(b'\037\213') # magic header |
| self.fileobj.write(b'\010') # compression method |
| try: |
| # RFC 1952 requires the FNAME field to be Latin-1. Do not |
| # include filenames that cannot be represented that way. |
| fname = os.path.basename(self.name) |
| fname = fname.encode('latin-1') |
| if fname.endswith(b'.gz'): |
| fname = fname[:-3] |
| except UnicodeEncodeError: |
| fname = b'' |
| flags = 0 |
| if fname: |
| flags = FNAME |
| self.fileobj.write(chr(flags).encode('latin-1')) |
| mtime = self.mtime |
| if mtime is None: |
| mtime = time.time() |
| write32u(self.fileobj, int(mtime)) |
| self.fileobj.write(b'\002') |
| self.fileobj.write(b'\377') |
| if fname: |
| self.fileobj.write(fname + b'\000') |
| |
| def _init_read(self): |
| self.crc = zlib.crc32(b"") & 0xffffffff |
| self.size = 0 |
| |
| def _read_gzip_header(self): |
| magic = self.fileobj.read(2) |
| if magic == b'': |
| raise EOFError("Reached EOF") |
| |
| if magic != b'\037\213': |
| raise IOError('Not a gzipped file') |
| method = ord( self.fileobj.read(1) ) |
| if method != 8: |
| raise IOError('Unknown compression method') |
| flag = ord( self.fileobj.read(1) ) |
| self.mtime = read32(self.fileobj) |
| # extraflag = self.fileobj.read(1) |
| # os = self.fileobj.read(1) |
| self.fileobj.read(2) |
| |
| if flag & FEXTRA: |
| # Read & discard the extra field, if present |
| xlen = ord(self.fileobj.read(1)) |
| xlen = xlen + 256*ord(self.fileobj.read(1)) |
| self.fileobj.read(xlen) |
| if flag & FNAME: |
| # Read and discard a null-terminated string containing the filename |
| while True: |
| s = self.fileobj.read(1) |
| if not s or s==b'\000': |
| break |
| if flag & FCOMMENT: |
| # Read and discard a null-terminated string containing a comment |
| while True: |
| s = self.fileobj.read(1) |
| if not s or s==b'\000': |
| break |
| if flag & FHCRC: |
| self.fileobj.read(2) # Read & discard the 16-bit header CRC |
| |
| unused = self.fileobj.unused() |
| if unused: |
| uncompress = self.decompress.decompress(unused) |
| self._add_read_data(uncompress) |
| |
| def write(self,data): |
| self._check_closed() |
| if self.mode != WRITE: |
| import errno |
| raise IOError(errno.EBADF, "write() on read-only GzipFile object") |
| |
| if self.fileobj is None: |
| raise ValueError("write() on closed GzipFile object") |
| |
| # Convert data type if called by io.BufferedWriter. |
| if isinstance(data, memoryview): |
| data = data.tobytes() |
| |
| if len(data) > 0: |
| self.size = self.size + len(data) |
| self.crc = zlib.crc32(data, self.crc) & 0xffffffff |
| self.fileobj.write( self.compress.compress(data) ) |
| self.offset += len(data) |
| |
| return len(data) |
| |
| def read(self, size=-1): |
| self._check_closed() |
| if self.mode != READ: |
| import errno |
| raise IOError(errno.EBADF, "read() on write-only GzipFile object") |
| |
| if self.extrasize <= 0 and self.fileobj is None: |
| return b'' |
| |
| readsize = 1024 |
| if size < 0: # get the whole thing |
| try: |
| while True: |
| self._read(readsize) |
| readsize = min(self.max_read_chunk, readsize * 2) |
| except EOFError: |
| size = self.extrasize |
| else: # just get some more of it |
| try: |
| while size > self.extrasize: |
| self._read(readsize) |
| readsize = min(self.max_read_chunk, readsize * 2) |
| except EOFError: |
| if size > self.extrasize: |
| size = self.extrasize |
| |
| offset = self.offset - self.extrastart |
| chunk = self.extrabuf[offset: offset + size] |
| self.extrasize = self.extrasize - size |
| |
| self.offset += size |
| return chunk |
| |
| def peek(self, n): |
| if self.mode != READ: |
| import errno |
| raise IOError(errno.EBADF, "peek() on write-only GzipFile object") |
| |
| # Do not return ridiculously small buffers, for one common idiom |
| # is to call peek(1) and expect more bytes in return. |
| if n < 100: |
| n = 100 |
| if self.extrasize == 0: |
| if self.fileobj is None: |
| return b'' |
| try: |
| # 1024 is the same buffering heuristic used in read() |
| self._read(max(n, 1024)) |
| except EOFError: |
| pass |
| offset = self.offset - self.extrastart |
| remaining = self.extrasize |
| assert remaining == len(self.extrabuf) - offset |
| return self.extrabuf[offset:offset + n] |
| |
| def _unread(self, buf): |
| self.extrasize = len(buf) + self.extrasize |
| self.offset -= len(buf) |
| |
| def _read(self, size=1024): |
| if self.fileobj is None: |
| raise EOFError("Reached EOF") |
| |
| if self._new_member: |
| # If the _new_member flag is set, we have to |
| # jump to the next member, if there is one. |
| self._init_read() |
| self._read_gzip_header() |
| self.decompress = zlib.decompressobj(-zlib.MAX_WBITS) |
| self._new_member = False |
| |
| # Read a chunk of data from the file |
| buf = self.fileobj.read(size) |
| |
| # If the EOF has been reached, flush the decompression object |
| # and mark this object as finished. |
| |
| if buf == b"": |
| uncompress = self.decompress.flush() |
| # Prepend the already read bytes to the fileobj to they can be |
| # seen by _read_eof() |
| self.fileobj.prepend(self.decompress.unused_data, True) |
| self._read_eof() |
| self._add_read_data( uncompress ) |
| raise EOFError('Reached EOF') |
| |
| uncompress = self.decompress.decompress(buf) |
| self._add_read_data( uncompress ) |
| |
| if self.decompress.unused_data != b"": |
| # Ending case: we've come to the end of a member in the file, |
| # so seek back to the start of the unused data, finish up |
| # this member, and read a new gzip header. |
| # Prepend the already read bytes to the fileobj to they can be |
| # seen by _read_eof() and _read_gzip_header() |
| self.fileobj.prepend(self.decompress.unused_data, True) |
| # Check the CRC and file size, and set the flag so we read |
| # a new member on the next call |
| self._read_eof() |
| self._new_member = True |
| |
| def _add_read_data(self, data): |
| self.crc = zlib.crc32(data, self.crc) & 0xffffffff |
| offset = self.offset - self.extrastart |
| self.extrabuf = self.extrabuf[offset:] + data |
| self.extrasize = self.extrasize + len(data) |
| self.extrastart = self.offset |
| self.size = self.size + len(data) |
| |
| def _read_eof(self): |
| # We've read to the end of the file |
| # We check the that the computed CRC and size of the |
| # uncompressed data matches the stored values. Note that the size |
| # stored is the true file size mod 2**32. |
| crc32 = read32(self.fileobj) |
| isize = read32(self.fileobj) # may exceed 2GB |
| if crc32 != self.crc: |
| raise IOError("CRC check failed %s != %s" % (hex(crc32), |
| hex(self.crc))) |
| elif isize != (self.size & 0xffffffff): |
| raise IOError("Incorrect length of data produced") |
| |
| # Gzip files can be padded with zeroes and still have archives. |
| # Consume all zero bytes and set the file position to the first |
| # non-zero byte. See http://www.gzip.org/#faq8 |
| c = b"\x00" |
| while c == b"\x00": |
| c = self.fileobj.read(1) |
| if c: |
| self.fileobj.prepend(c, True) |
| |
| @property |
| def closed(self): |
| return self.fileobj is None |
| |
| def close(self): |
| if self.fileobj is None: |
| return |
| if self.mode == WRITE: |
| self.fileobj.write(self.compress.flush()) |
| write32u(self.fileobj, self.crc) |
| # self.size may exceed 2GB, or even 4GB |
| write32u(self.fileobj, self.size & 0xffffffff) |
| self.fileobj = None |
| elif self.mode == READ: |
| self.fileobj = None |
| if self.myfileobj: |
| self.myfileobj.close() |
| self.myfileobj = None |
| |
| def flush(self,zlib_mode=zlib.Z_SYNC_FLUSH): |
| self._check_closed() |
| if self.mode == WRITE: |
| # Ensure the compressor's buffer is flushed |
| self.fileobj.write(self.compress.flush(zlib_mode)) |
| self.fileobj.flush() |
| |
| def fileno(self): |
| """Invoke the underlying file object's fileno() method. |
| |
| This will raise AttributeError if the underlying file object |
| doesn't support fileno(). |
| """ |
| return self.fileobj.fileno() |
| |
| def rewind(self): |
| '''Return the uncompressed stream file position indicator to the |
| beginning of the file''' |
| if self.mode != READ: |
| raise IOError("Can't rewind in write mode") |
| self.fileobj.seek(0) |
| self._new_member = True |
| self.extrabuf = b"" |
| self.extrasize = 0 |
| self.extrastart = 0 |
| self.offset = 0 |
| |
| def readable(self): |
| return self.mode == READ |
| |
| def writable(self): |
| return self.mode == WRITE |
| |
| def seekable(self): |
| return True |
| |
| def seek(self, offset, whence=0): |
| if whence: |
| if whence == 1: |
| offset = self.offset + offset |
| else: |
| raise ValueError('Seek from end not supported') |
| if self.mode == WRITE: |
| if offset < self.offset: |
| raise IOError('Negative seek in write mode') |
| count = offset - self.offset |
| chunk = bytes(1024) |
| for i in range(count // 1024): |
| self.write(chunk) |
| self.write(bytes(count % 1024)) |
| elif self.mode == READ: |
| if offset < self.offset: |
| # for negative seek, rewind and do positive seek |
| self.rewind() |
| count = offset - self.offset |
| for i in range(count // 1024): |
| self.read(1024) |
| self.read(count % 1024) |
| |
| return self.offset |
| |
| def readline(self, size=-1): |
| if size < 0: |
| # Shortcut common case - newline found in buffer. |
| offset = self.offset - self.extrastart |
| i = self.extrabuf.find(b'\n', offset) + 1 |
| if i > 0: |
| self.extrasize -= i - offset |
| self.offset += i - offset |
| return self.extrabuf[offset: i] |
| |
| size = sys.maxsize |
| readsize = self.min_readsize |
| else: |
| readsize = size |
| bufs = [] |
| while size != 0: |
| c = self.read(readsize) |
| i = c.find(b'\n') |
| |
| # We set i=size to break out of the loop under two |
| # conditions: 1) there's no newline, and the chunk is |
| # larger than size, or 2) there is a newline, but the |
| # resulting line would be longer than 'size'. |
| if (size <= i) or (i == -1 and len(c) > size): |
| i = size - 1 |
| |
| if i >= 0 or c == b'': |
| bufs.append(c[:i + 1]) # Add portion of last chunk |
| self._unread(c[i + 1:]) # Push back rest of chunk |
| break |
| |
| # Append chunk to list, decrease 'size', |
| bufs.append(c) |
| size = size - len(c) |
| readsize = min(size, readsize * 2) |
| if readsize > self.min_readsize: |
| self.min_readsize = min(readsize, self.min_readsize * 2, 512) |
| return b''.join(bufs) # Return resulting line |
| |
| |
| def compress(data, compresslevel=9): |
| """Compress data in one shot and return the compressed string. |
| Optional argument is the compression level, in range of 1-9. |
| """ |
| buf = io.BytesIO() |
| with GzipFile(fileobj=buf, mode='wb', compresslevel=compresslevel) as f: |
| f.write(data) |
| return buf.getvalue() |
| |
| def decompress(data): |
| """Decompress a gzip compressed string in one shot. |
| Return the decompressed string. |
| """ |
| with GzipFile(fileobj=io.BytesIO(data)) as f: |
| return f.read() |
| |
| |
| def _test(): |
| # Act like gzip; with -d, act like gunzip. |
| # The input file is not deleted, however, nor are any other gzip |
| # options or features supported. |
| args = sys.argv[1:] |
| decompress = args and args[0] == "-d" |
| if decompress: |
| args = args[1:] |
| if not args: |
| args = ["-"] |
| for arg in args: |
| if decompress: |
| if arg == "-": |
| f = GzipFile(filename="", mode="rb", fileobj=sys.stdin.buffer) |
| g = sys.stdout.buffer |
| else: |
| if arg[-3:] != ".gz": |
| print("filename doesn't end in .gz:", repr(arg)) |
| continue |
| f = open(arg, "rb") |
| g = builtins.open(arg[:-3], "wb") |
| else: |
| if arg == "-": |
| f = sys.stdin.buffer |
| g = GzipFile(filename="", mode="wb", fileobj=sys.stdout.buffer) |
| else: |
| f = builtins.open(arg, "rb") |
| g = open(arg + ".gz", "wb") |
| while True: |
| chunk = f.read(1024) |
| if not chunk: |
| break |
| g.write(chunk) |
| if g is not sys.stdout: |
| g.close() |
| if f is not sys.stdin: |
| f.close() |
| |
| if __name__ == '__main__': |
| _test() |