diff --git a/Doc/howto/cporting.rst b/Doc/howto/cporting.rst
index 7cacb0a..b638e32 100644
--- a/Doc/howto/cporting.rst
+++ b/Doc/howto/cporting.rst
@@ -6,252 +6,21 @@
 Porting Extension Modules to Python 3
 *************************************
 
-:author: Benjamin Peterson
+We recommend the following resources for porting extension modules to Python 3:
 
+* The `Migrating C extensions`_ chapter from
+  *Supporting Python 3: An in-depth guide*, a book on moving from Python 2
+  to Python 3 in general, guides the reader through porting an extension
+  module.
+* The `Porting guide`_ from the *py3c* project provides opinionated
+  suggestions with supporting code.
+* The `Cython`_ and `CFFI`_ libraries offer abstractions over
+  Python's C API.
+  Extensions generally need to be re-written to use one of them,
+  but the library then handles differences between various Python
+  versions and implementations.
 
-.. topic:: Abstract
-
-   Although changing the C-API was not one of Python 3's objectives,
-   the many Python-level changes made leaving Python 2's API intact
-   impossible.  In fact, some changes such as :func:`int` and
-   :func:`long` unification are more obvious on the C level.  This
-   document endeavors to document incompatibilities and how they can
-   be worked around.
-
-
-Conditional compilation
-=======================
-
-The easiest way to compile only some code for Python 3 is to check
-if :c:macro:`PY_MAJOR_VERSION` is greater than or equal to 3. ::
-
-   #if PY_MAJOR_VERSION >= 3
-   #define IS_PY3K
-   #endif
-
-API functions that are not present can be aliased to their equivalents within
-conditional blocks.
-
-
-Changes to Object APIs
-======================
-
-Python 3 merged together some types with similar functions while cleanly
-separating others.
-
-
-str/unicode Unification
------------------------
-
-Python 3's :func:`str` type is equivalent to Python 2's :func:`unicode`; the C
-functions are called ``PyUnicode_*`` for both.  The old 8-bit string type has become
-:func:`bytes`, with C functions called ``PyBytes_*``.  Python 2.6 and later provide a compatibility header,
-:file:`bytesobject.h`, mapping ``PyBytes`` names to ``PyString`` ones.  For best
-compatibility with Python 3, :c:type:`PyUnicode` should be used for textual data and
-:c:type:`PyBytes` for binary data.  It's also important to remember that
-:c:type:`PyBytes` and :c:type:`PyUnicode` in Python 3 are not interchangeable like
-:c:type:`PyString` and :c:type:`PyUnicode` are in Python 2.  The following example
-shows best practices with regards to :c:type:`PyUnicode`, :c:type:`PyString`,
-and :c:type:`PyBytes`. ::
-
-   #include "stdlib.h"
-   #include "Python.h"
-   #include "bytesobject.h"
-
-   /* text example */
-   static PyObject *
-   say_hello(PyObject *self, PyObject *args) {
-       PyObject *name, *result;
-
-       if (!PyArg_ParseTuple(args, "U:say_hello", &name))
-           return NULL;
-
-       result = PyUnicode_FromFormat("Hello, %S!", name);
-       return result;
-   }
-
-   /* just a forward */
-   static char * do_encode(PyObject *);
-
-   /* bytes example */
-   static PyObject *
-   encode_object(PyObject *self, PyObject *args) {
-       char *encoded;
-       PyObject *result, *myobj;
-
-       if (!PyArg_ParseTuple(args, "O:encode_object", &myobj))
-           return NULL;
-
-       encoded = do_encode(myobj);
-       if (encoded == NULL)
-           return NULL;
-       result = PyBytes_FromString(encoded);
-       free(encoded);
-       return result;
-   }
-
-
-long/int Unification
---------------------
-
-Python 3 has only one integer type, :func:`int`.  But it actually
-corresponds to Python 2's :func:`long` type—the :func:`int` type
-used in Python 2 was removed.  In the C-API, ``PyInt_*`` functions
-are replaced by their ``PyLong_*`` equivalents.
-
-
-Module initialization and state
-===============================
-
-Python 3 has a revamped extension module initialization system.  (See
-:pep:`3121`.)  Instead of storing module state in globals, they should
-be stored in an interpreter specific structure.  Creating modules that
-act correctly in both Python 2 and Python 3 is tricky.  The following
-simple example demonstrates how. ::
-
-   #include "Python.h"
-
-   struct module_state {
-       PyObject *error;
-   };
-
-   #if PY_MAJOR_VERSION >= 3
-   #define GETSTATE(m) ((struct module_state*)PyModule_GetState(m))
-   #else
-   #define GETSTATE(m) (&_state)
-   static struct module_state _state;
-   #endif
-
-   static PyObject *
-   error_out(PyObject *m) {
-       struct module_state *st = GETSTATE(m);
-       PyErr_SetString(st->error, "something bad happened");
-       return NULL;
-   }
-
-   static PyMethodDef myextension_methods[] = {
-       {"error_out", (PyCFunction)error_out, METH_NOARGS, NULL},
-       {NULL, NULL}
-   };
-
-   #if PY_MAJOR_VERSION >= 3
-
-   static int myextension_traverse(PyObject *m, visitproc visit, void *arg) {
-       Py_VISIT(GETSTATE(m)->error);
-       return 0;
-   }
-
-   static int myextension_clear(PyObject *m) {
-       Py_CLEAR(GETSTATE(m)->error);
-       return 0;
-   }
-
-
-   static struct PyModuleDef moduledef = {
-           PyModuleDef_HEAD_INIT,
-           "myextension",
-           NULL,
-           sizeof(struct module_state),
-           myextension_methods,
-           NULL,
-           myextension_traverse,
-           myextension_clear,
-           NULL
-   };
-
-   #define INITERROR return NULL
-
-   PyMODINIT_FUNC
-   PyInit_myextension(void)
-
-   #else
-   #define INITERROR return
-
-   void
-   initmyextension(void)
-   #endif
-   {
-   #if PY_MAJOR_VERSION >= 3
-       PyObject *module = PyModule_Create(&moduledef);
-   #else
-       PyObject *module = Py_InitModule("myextension", myextension_methods);
-   #endif
-
-       if (module == NULL)
-           INITERROR;
-       struct module_state *st = GETSTATE(module);
-
-       st->error = PyErr_NewException("myextension.Error", NULL, NULL);
-       if (st->error == NULL) {
-           Py_DECREF(module);
-           INITERROR;
-       }
-
-   #if PY_MAJOR_VERSION >= 3
-       return module;
-   #endif
-   }
-
-
-CObject replaced with Capsule
-=============================
-
-The :c:type:`Capsule` object was introduced in Python 3.1 and 2.7 to replace
-:c:type:`CObject`.  CObjects were useful,
-but the :c:type:`CObject` API was problematic: it didn't permit distinguishing
-between valid CObjects, which allowed mismatched CObjects to crash the
-interpreter, and some of its APIs relied on undefined behavior in C.
-(For further reading on the rationale behind Capsules, please see :issue:`5630`.)
-
-If you're currently using CObjects, and you want to migrate to 3.1 or newer,
-you'll need to switch to Capsules.
-:c:type:`CObject` was deprecated in 3.1 and 2.7 and completely removed in
-Python 3.2.  If you only support 2.7, or 3.1 and above, you
-can simply switch to :c:type:`Capsule`.  If you need to support Python 3.0,
-or versions of Python earlier than 2.7,
-you'll have to support both CObjects and Capsules.
-(Note that Python 3.0 is no longer supported, and it is not recommended
-for production use.)
-
-The following example header file :file:`capsulethunk.h` may
-solve the problem for you.  Simply write your code against the
-:c:type:`Capsule` API and include this header file after
-:file:`Python.h`.  Your code will automatically use Capsules
-in versions of Python with Capsules, and switch to CObjects
-when Capsules are unavailable.
-
-:file:`capsulethunk.h` simulates Capsules using CObjects.  However,
-:c:type:`CObject` provides no place to store the capsule's "name".  As a
-result the simulated :c:type:`Capsule` objects created by :file:`capsulethunk.h`
-behave slightly differently from real Capsules.  Specifically:
-
-  * The name parameter passed in to :c:func:`PyCapsule_New` is ignored.
-
-  * The name parameter passed in to :c:func:`PyCapsule_IsValid` and
-    :c:func:`PyCapsule_GetPointer` is ignored, and no error checking
-    of the name is performed.
-
-  * :c:func:`PyCapsule_GetName` always returns NULL.
-
-  * :c:func:`PyCapsule_SetName` always raises an exception and
-    returns failure.  (Since there's no way to store a name
-    in a CObject, noisy failure of :c:func:`PyCapsule_SetName`
-    was deemed preferable to silent failure here.  If this is
-    inconvenient, feel free to modify your local
-    copy as you see fit.)
-
-You can find :file:`capsulethunk.h` in the Python source distribution
-as :source:`Doc/includes/capsulethunk.h`.  We also include it here for
-your convenience:
-
-.. literalinclude:: ../includes/capsulethunk.h
-
-
-
-Other options
-=============
-
-If you are writing a new extension module, you might consider `Cython
-<http://cython.org/>`_.  It translates a Python-like language to C.  The
-extension modules it creates are compatible with Python 3 and Python 2.
-
+.. _Migrating C extensions: http://python3porting.com/cextensions.html
+.. _Porting guide: https://py3c.readthedocs.io/en/latest/guide.html
+.. _Cython: http://cython.org/
+.. _CFFI: https://cffi.readthedocs.io/en/latest/
diff --git a/Doc/includes/capsulethunk.h b/Doc/includes/capsulethunk.h
deleted file mode 100644
index 6b20564..0000000
--- a/Doc/includes/capsulethunk.h
+++ /dev/null
@@ -1,134 +0,0 @@
-#ifndef __CAPSULETHUNK_H
-#define __CAPSULETHUNK_H
-
-#if (    (PY_VERSION_HEX <  0x02070000) \
-     || ((PY_VERSION_HEX >= 0x03000000) \
-      && (PY_VERSION_HEX <  0x03010000)) )
-
-#define __PyCapsule_GetField(capsule, field, default_value) \
-    ( PyCapsule_CheckExact(capsule) \
-        ? (((PyCObject *)capsule)->field) \
-        : (default_value) \
-    ) \
-
-#define __PyCapsule_SetField(capsule, field, value) \
-    ( PyCapsule_CheckExact(capsule) \
-        ? (((PyCObject *)capsule)->field = value), 1 \
-        : 0 \
-    ) \
-
-
-#define PyCapsule_Type PyCObject_Type
-
-#define PyCapsule_CheckExact(capsule) (PyCObject_Check(capsule))
-#define PyCapsule_IsValid(capsule, name) (PyCObject_Check(capsule))
-
-
-#define PyCapsule_New(pointer, name, destructor) \
-    (PyCObject_FromVoidPtr(pointer, destructor))
-
-
-#define PyCapsule_GetPointer(capsule, name) \
-    (PyCObject_AsVoidPtr(capsule))
-
-/* Don't call PyCObject_SetPointer here, it fails if there's a destructor */
-#define PyCapsule_SetPointer(capsule, pointer) \
-    __PyCapsule_SetField(capsule, cobject, pointer)
-
-
-#define PyCapsule_GetDestructor(capsule) \
-    __PyCapsule_GetField(capsule, destructor)
-
-#define PyCapsule_SetDestructor(capsule, dtor) \
-    __PyCapsule_SetField(capsule, destructor, dtor)
-
-
-/*
- * Sorry, there's simply no place
- * to store a Capsule "name" in a CObject.
- */
-#define PyCapsule_GetName(capsule) NULL
-
-static int
-PyCapsule_SetName(PyObject *capsule, const char *unused)
-{
-    unused = unused;
-    PyErr_SetString(PyExc_NotImplementedError,
-        "can't use PyCapsule_SetName with CObjects");
-    return 1;
-}
-
-
-
-#define PyCapsule_GetContext(capsule) \
-    __PyCapsule_GetField(capsule, descr)
-
-#define PyCapsule_SetContext(capsule, context) \
-    __PyCapsule_SetField(capsule, descr, context)
-
-
-static void *
-PyCapsule_Import(const char *name, int no_block)
-{
-    PyObject *object = NULL;
-    void *return_value = NULL;
-    char *trace;
-    size_t name_length = (strlen(name) + 1) * sizeof(char);
-    char *name_dup = (char *)PyMem_MALLOC(name_length);
-
-    if (!name_dup) {
-        return NULL;
-    }
-
-    memcpy(name_dup, name, name_length);
-
-    trace = name_dup;
-    while (trace) {
-        char *dot = strchr(trace, '.');
-        if (dot) {
-            *dot++ = '\0';
-        }
-
-        if (object == NULL) {
-            if (no_block) {
-                object = PyImport_ImportModuleNoBlock(trace);
-            } else {
-                object = PyImport_ImportModule(trace);
-                if (!object) {
-                    PyErr_Format(PyExc_ImportError,
-                        "PyCapsule_Import could not "
-                        "import module \"%s\"", trace);
-                }
-            }
-        } else {
-            PyObject *object2 = PyObject_GetAttrString(object, trace);
-            Py_DECREF(object);
-            object = object2;
-        }
-        if (!object) {
-            goto EXIT;
-        }
-
-        trace = dot;
-    }
-
-    if (PyCObject_Check(object)) {
-        PyCObject *cobject = (PyCObject *)object;
-        return_value = cobject->cobject;
-    } else {
-        PyErr_Format(PyExc_AttributeError,
-            "PyCapsule_Import \"%s\" is not valid",
-            name);
-    }
-
-EXIT:
-    Py_XDECREF(object);
-    if (name_dup) {
-        PyMem_FREE(name_dup);
-    }
-    return return_value;
-}
-
-#endif /* #if PY_VERSION_HEX < 0x02070000 */
-
-#endif /* __CAPSULETHUNK_H */
diff --git a/Doc/tools/susp-ignored.csv b/Doc/tools/susp-ignored.csv
index 33cd48f..bb3310b 100644
--- a/Doc/tools/susp-ignored.csv
+++ b/Doc/tools/susp-ignored.csv
@@ -15,8 +15,6 @@
 faq/programming,,:reduce,"print((lambda Ru,Ro,Iu,Io,IM,Sx,Sy:reduce(lambda x,y:x+y,map(lambda y,"
 faq/programming,,:reduce,"Sx=Sx,Sy=Sy:reduce(lambda x,y:x+y,map(lambda x,xc=Ru,yc=yc,Ru=Ru,Ro=Ro,"
 faq/windows,,:bd8afb90ebf2,"Python 3.3.0 (v3.3.0:bd8afb90ebf2, Sep 29 2012, 10:55:48) [MSC v.1600 32 bit (Intel)] on win32"
-howto/cporting,,:encode,"if (!PyArg_ParseTuple(args, ""O:encode_object"", &myobj))"
-howto/cporting,,:say,"if (!PyArg_ParseTuple(args, ""U:say_hello"", &name))"
 howto/curses,,:black,"colors when it activates color mode.  They are: 0:black, 1:red,"
 howto/curses,,:red,"colors when it activates color mode.  They are: 0:black, 1:red,"
 howto/curses,,:green,"2:green, 3:yellow, 4:blue, 5:magenta, 6:cyan, and 7:white.  The"