| """Stuff to parse WAVE files. |
| |
| Usage. |
| |
| Reading WAVE files: |
| f = wave.open(file, 'r') |
| where file is either the name of a file or an open file pointer. |
| The open file pointer must have methods read(), seek(), and close(). |
| When the setpos() and rewind() methods are not used, the seek() |
| method is not necessary. |
| |
| This returns an instance of a class with the following public methods: |
| getnchannels() -- returns number of audio channels (1 for |
| mono, 2 for stereo) |
| getsampwidth() -- returns sample width in bytes |
| getframerate() -- returns sampling frequency |
| getnframes() -- returns number of audio frames |
| getcomptype() -- returns compression type ('NONE' for linear samples) |
| getcompname() -- returns human-readable version of |
| compression type ('not compressed' linear samples) |
| getparams() -- returns a namedtuple consisting of all of the |
| above in the above order |
| getmarkers() -- returns None (for compatibility with the |
| aifc module) |
| getmark(id) -- raises an error since the mark does not |
| exist (for compatibility with the aifc module) |
| readframes(n) -- returns at most n frames of audio |
| rewind() -- rewind to the beginning of the audio stream |
| setpos(pos) -- seek to the specified position |
| tell() -- return the current position |
| close() -- close the instance (make it unusable) |
| The position returned by tell() and the position given to setpos() |
| are compatible and have nothing to do with the actual position in the |
| file. |
| The close() method is called automatically when the class instance |
| is destroyed. |
| |
| Writing WAVE files: |
| f = wave.open(file, 'w') |
| where file is either the name of a file or an open file pointer. |
| The open file pointer must have methods write(), tell(), seek(), and |
| close(). |
| |
| This returns an instance of a class with the following public methods: |
| setnchannels(n) -- set the number of channels |
| setsampwidth(n) -- set the sample width |
| setframerate(n) -- set the frame rate |
| setnframes(n) -- set the number of frames |
| setcomptype(type, name) |
| -- set the compression type and the |
| human-readable compression type |
| setparams(tuple) |
| -- set all parameters at once |
| tell() -- return current position in output file |
| writeframesraw(data) |
| -- write audio frames without pathing up the |
| file header |
| writeframes(data) |
| -- write audio frames and patch up the file header |
| close() -- patch up the file header and close the |
| output file |
| You should set the parameters before the first writeframesraw or |
| writeframes. The total number of frames does not need to be set, |
| but when it is set to the correct value, the header does not have to |
| be patched up. |
| It is best to first set all parameters, perhaps possibly the |
| compression type, and then write audio frames using writeframesraw. |
| When all frames have been written, either call writeframes('') or |
| close() to patch up the sizes in the header. |
| The close() method is called automatically when the class instance |
| is destroyed. |
| """ |
| |
| import builtins |
| |
| __all__ = ["open", "openfp", "Error"] |
| |
| class Error(Exception): |
| pass |
| |
| WAVE_FORMAT_PCM = 0x0001 |
| |
| _array_fmts = None, 'b', 'h', None, 'i' |
| |
| import audioop |
| import struct |
| import sys |
| from chunk import Chunk |
| from collections import namedtuple |
| |
| _wave_params = namedtuple('_wave_params', |
| 'nchannels sampwidth framerate nframes comptype compname') |
| |
| class Wave_read: |
| """Variables used in this class: |
| |
| These variables are available to the user though appropriate |
| methods of this class: |
| _file -- the open file with methods read(), close(), and seek() |
| set through the __init__() method |
| _nchannels -- the number of audio channels |
| available through the getnchannels() method |
| _nframes -- the number of audio frames |
| available through the getnframes() method |
| _sampwidth -- the number of bytes per audio sample |
| available through the getsampwidth() method |
| _framerate -- the sampling frequency |
| available through the getframerate() method |
| _comptype -- the AIFF-C compression type ('NONE' if AIFF) |
| available through the getcomptype() method |
| _compname -- the human-readable AIFF-C compression type |
| available through the getcomptype() method |
| _soundpos -- the position in the audio stream |
| available through the tell() method, set through the |
| setpos() method |
| |
| These variables are used internally only: |
| _fmt_chunk_read -- 1 iff the FMT chunk has been read |
| _data_seek_needed -- 1 iff positioned correctly in audio |
| file for readframes() |
| _data_chunk -- instantiation of a chunk class for the DATA chunk |
| _framesize -- size of one frame in the file |
| """ |
| |
| def initfp(self, file): |
| self._convert = None |
| self._soundpos = 0 |
| self._file = Chunk(file, bigendian = 0) |
| if self._file.getname() != b'RIFF': |
| raise Error('file does not start with RIFF id') |
| if self._file.read(4) != b'WAVE': |
| raise Error('not a WAVE file') |
| self._fmt_chunk_read = 0 |
| self._data_chunk = None |
| while 1: |
| self._data_seek_needed = 1 |
| try: |
| chunk = Chunk(self._file, bigendian = 0) |
| except EOFError: |
| break |
| chunkname = chunk.getname() |
| if chunkname == b'fmt ': |
| self._read_fmt_chunk(chunk) |
| self._fmt_chunk_read = 1 |
| elif chunkname == b'data': |
| if not self._fmt_chunk_read: |
| raise Error('data chunk before fmt chunk') |
| self._data_chunk = chunk |
| self._nframes = chunk.chunksize // self._framesize |
| self._data_seek_needed = 0 |
| break |
| chunk.skip() |
| if not self._fmt_chunk_read or not self._data_chunk: |
| raise Error('fmt chunk and/or data chunk missing') |
| |
| def __init__(self, f): |
| self._i_opened_the_file = None |
| if isinstance(f, str): |
| f = builtins.open(f, 'rb') |
| self._i_opened_the_file = f |
| # else, assume it is an open file object already |
| try: |
| self.initfp(f) |
| except: |
| if self._i_opened_the_file: |
| f.close() |
| raise |
| |
| def __del__(self): |
| self.close() |
| |
| def __enter__(self): |
| return self |
| |
| def __exit__(self, *args): |
| self.close() |
| |
| # |
| # User visible methods. |
| # |
| def getfp(self): |
| return self._file |
| |
| def rewind(self): |
| self._data_seek_needed = 1 |
| self._soundpos = 0 |
| |
| def close(self): |
| if self._i_opened_the_file: |
| self._i_opened_the_file.close() |
| self._i_opened_the_file = None |
| self._file = None |
| |
| def tell(self): |
| return self._soundpos |
| |
| def getnchannels(self): |
| return self._nchannels |
| |
| def getnframes(self): |
| return self._nframes |
| |
| def getsampwidth(self): |
| return self._sampwidth |
| |
| def getframerate(self): |
| return self._framerate |
| |
| def getcomptype(self): |
| return self._comptype |
| |
| def getcompname(self): |
| return self._compname |
| |
| def getparams(self): |
| return _wave_params(self.getnchannels(), self.getsampwidth(), |
| self.getframerate(), self.getnframes(), |
| self.getcomptype(), self.getcompname()) |
| |
| def getmarkers(self): |
| return None |
| |
| def getmark(self, id): |
| raise Error('no marks') |
| |
| def setpos(self, pos): |
| if pos < 0 or pos > self._nframes: |
| raise Error('position not in range') |
| self._soundpos = pos |
| self._data_seek_needed = 1 |
| |
| def readframes(self, nframes): |
| if self._data_seek_needed: |
| self._data_chunk.seek(0, 0) |
| pos = self._soundpos * self._framesize |
| if pos: |
| self._data_chunk.seek(pos, 0) |
| self._data_seek_needed = 0 |
| if nframes == 0: |
| return b'' |
| data = self._data_chunk.read(nframes * self._framesize) |
| if self._sampwidth != 1 and sys.byteorder == 'big': |
| data = audioop.byteswap(data, self._sampwidth) |
| if self._convert and data: |
| data = self._convert(data) |
| self._soundpos = self._soundpos + len(data) // (self._nchannels * self._sampwidth) |
| return data |
| |
| # |
| # Internal methods. |
| # |
| |
| def _read_fmt_chunk(self, chunk): |
| wFormatTag, self._nchannels, self._framerate, dwAvgBytesPerSec, wBlockAlign = struct.unpack_from('<HHLLH', chunk.read(14)) |
| if wFormatTag == WAVE_FORMAT_PCM: |
| sampwidth = struct.unpack_from('<H', chunk.read(2))[0] |
| self._sampwidth = (sampwidth + 7) // 8 |
| else: |
| raise Error('unknown format: %r' % (wFormatTag,)) |
| self._framesize = self._nchannels * self._sampwidth |
| self._comptype = 'NONE' |
| self._compname = 'not compressed' |
| |
| class Wave_write: |
| """Variables used in this class: |
| |
| These variables are user settable through appropriate methods |
| of this class: |
| _file -- the open file with methods write(), close(), tell(), seek() |
| set through the __init__() method |
| _comptype -- the AIFF-C compression type ('NONE' in AIFF) |
| set through the setcomptype() or setparams() method |
| _compname -- the human-readable AIFF-C compression type |
| set through the setcomptype() or setparams() method |
| _nchannels -- the number of audio channels |
| set through the setnchannels() or setparams() method |
| _sampwidth -- the number of bytes per audio sample |
| set through the setsampwidth() or setparams() method |
| _framerate -- the sampling frequency |
| set through the setframerate() or setparams() method |
| _nframes -- the number of audio frames written to the header |
| set through the setnframes() or setparams() method |
| |
| These variables are used internally only: |
| _datalength -- the size of the audio samples written to the header |
| _nframeswritten -- the number of frames actually written |
| _datawritten -- the size of the audio samples actually written |
| """ |
| |
| def __init__(self, f): |
| self._i_opened_the_file = None |
| if isinstance(f, str): |
| f = builtins.open(f, 'wb') |
| self._i_opened_the_file = f |
| try: |
| self.initfp(f) |
| except: |
| if self._i_opened_the_file: |
| f.close() |
| raise |
| |
| def initfp(self, file): |
| self._file = file |
| self._convert = None |
| self._nchannels = 0 |
| self._sampwidth = 0 |
| self._framerate = 0 |
| self._nframes = 0 |
| self._nframeswritten = 0 |
| self._datawritten = 0 |
| self._datalength = 0 |
| self._headerwritten = False |
| |
| def __del__(self): |
| self.close() |
| |
| def __enter__(self): |
| return self |
| |
| def __exit__(self, *args): |
| self.close() |
| |
| # |
| # User visible methods. |
| # |
| def setnchannels(self, nchannels): |
| if self._datawritten: |
| raise Error('cannot change parameters after starting to write') |
| if nchannels < 1: |
| raise Error('bad # of channels') |
| self._nchannels = nchannels |
| |
| def getnchannels(self): |
| if not self._nchannels: |
| raise Error('number of channels not set') |
| return self._nchannels |
| |
| def setsampwidth(self, sampwidth): |
| if self._datawritten: |
| raise Error('cannot change parameters after starting to write') |
| if sampwidth < 1 or sampwidth > 4: |
| raise Error('bad sample width') |
| self._sampwidth = sampwidth |
| |
| def getsampwidth(self): |
| if not self._sampwidth: |
| raise Error('sample width not set') |
| return self._sampwidth |
| |
| def setframerate(self, framerate): |
| if self._datawritten: |
| raise Error('cannot change parameters after starting to write') |
| if framerate <= 0: |
| raise Error('bad frame rate') |
| self._framerate = int(round(framerate)) |
| |
| def getframerate(self): |
| if not self._framerate: |
| raise Error('frame rate not set') |
| return self._framerate |
| |
| def setnframes(self, nframes): |
| if self._datawritten: |
| raise Error('cannot change parameters after starting to write') |
| self._nframes = nframes |
| |
| def getnframes(self): |
| return self._nframeswritten |
| |
| def setcomptype(self, comptype, compname): |
| if self._datawritten: |
| raise Error('cannot change parameters after starting to write') |
| if comptype not in ('NONE',): |
| raise Error('unsupported compression type') |
| self._comptype = comptype |
| self._compname = compname |
| |
| def getcomptype(self): |
| return self._comptype |
| |
| def getcompname(self): |
| return self._compname |
| |
| def setparams(self, params): |
| nchannels, sampwidth, framerate, nframes, comptype, compname = params |
| if self._datawritten: |
| raise Error('cannot change parameters after starting to write') |
| self.setnchannels(nchannels) |
| self.setsampwidth(sampwidth) |
| self.setframerate(framerate) |
| self.setnframes(nframes) |
| self.setcomptype(comptype, compname) |
| |
| def getparams(self): |
| if not self._nchannels or not self._sampwidth or not self._framerate: |
| raise Error('not all parameters set') |
| return _wave_params(self._nchannels, self._sampwidth, self._framerate, |
| self._nframes, self._comptype, self._compname) |
| |
| def setmark(self, id, pos, name): |
| raise Error('setmark() not supported') |
| |
| def getmark(self, id): |
| raise Error('no marks') |
| |
| def getmarkers(self): |
| return None |
| |
| def tell(self): |
| return self._nframeswritten |
| |
| def writeframesraw(self, data): |
| if not isinstance(data, (bytes, bytearray)): |
| data = memoryview(data).cast('B') |
| self._ensure_header_written(len(data)) |
| nframes = len(data) // (self._sampwidth * self._nchannels) |
| if self._convert: |
| data = self._convert(data) |
| if self._sampwidth != 1 and sys.byteorder == 'big': |
| data = audioop.byteswap(data, self._sampwidth) |
| self._file.write(data) |
| self._datawritten += len(data) |
| self._nframeswritten = self._nframeswritten + nframes |
| |
| def writeframes(self, data): |
| self.writeframesraw(data) |
| if self._datalength != self._datawritten: |
| self._patchheader() |
| |
| def close(self): |
| if self._file: |
| try: |
| self._ensure_header_written(0) |
| if self._datalength != self._datawritten: |
| self._patchheader() |
| self._file.flush() |
| finally: |
| self._file = None |
| if self._i_opened_the_file: |
| self._i_opened_the_file.close() |
| self._i_opened_the_file = None |
| |
| # |
| # Internal methods. |
| # |
| |
| def _ensure_header_written(self, datasize): |
| if not self._headerwritten: |
| if not self._nchannels: |
| raise Error('# channels not specified') |
| if not self._sampwidth: |
| raise Error('sample width not specified') |
| if not self._framerate: |
| raise Error('sampling rate not specified') |
| self._write_header(datasize) |
| |
| def _write_header(self, initlength): |
| assert not self._headerwritten |
| self._file.write(b'RIFF') |
| if not self._nframes: |
| self._nframes = initlength // (self._nchannels * self._sampwidth) |
| self._datalength = self._nframes * self._nchannels * self._sampwidth |
| try: |
| self._form_length_pos = self._file.tell() |
| except (AttributeError, OSError): |
| self._form_length_pos = None |
| self._file.write(struct.pack('<L4s4sLHHLLHH4s', |
| 36 + self._datalength, b'WAVE', b'fmt ', 16, |
| WAVE_FORMAT_PCM, self._nchannels, self._framerate, |
| self._nchannels * self._framerate * self._sampwidth, |
| self._nchannels * self._sampwidth, |
| self._sampwidth * 8, b'data')) |
| if self._form_length_pos is not None: |
| self._data_length_pos = self._file.tell() |
| self._file.write(struct.pack('<L', self._datalength)) |
| self._headerwritten = True |
| |
| def _patchheader(self): |
| assert self._headerwritten |
| if self._datawritten == self._datalength: |
| return |
| curpos = self._file.tell() |
| self._file.seek(self._form_length_pos, 0) |
| self._file.write(struct.pack('<L', 36 + self._datawritten)) |
| self._file.seek(self._data_length_pos, 0) |
| self._file.write(struct.pack('<L', self._datawritten)) |
| self._file.seek(curpos, 0) |
| self._datalength = self._datawritten |
| |
| def open(f, mode=None): |
| if mode is None: |
| if hasattr(f, 'mode'): |
| mode = f.mode |
| else: |
| mode = 'rb' |
| if mode in ('r', 'rb'): |
| return Wave_read(f) |
| elif mode in ('w', 'wb'): |
| return Wave_write(f) |
| else: |
| raise Error("mode must be 'r', 'rb', 'w', or 'wb'") |
| |
| openfp = open # B/W compatibility |