| |
| /* Write Python objects to files and read them back. |
| This is primarily intended for writing and reading compiled Python code, |
| even though dicts, lists, sets and frozensets, not commonly seen in |
| code objects, are supported. |
| Version 3 of this protocol properly supports circular links |
| and sharing. */ |
| |
| #define PY_SSIZE_T_CLEAN |
| |
| #include "Python.h" |
| #include "longintrepr.h" |
| #include "code.h" |
| #include "marshal.h" |
| |
| #define ABS(x) ((x) < 0 ? -(x) : (x)) |
| |
| /* High water mark to determine when the marshalled object is dangerously deep |
| * and risks coring the interpreter. When the object stack gets this deep, |
| * raise an exception instead of continuing. |
| * On Windows debug builds, reduce this value. |
| */ |
| #if defined(MS_WINDOWS) && defined(_DEBUG) |
| #define MAX_MARSHAL_STACK_DEPTH 1500 |
| #else |
| #define MAX_MARSHAL_STACK_DEPTH 2000 |
| #endif |
| |
| #define TYPE_NULL '0' |
| #define TYPE_NONE 'N' |
| #define TYPE_FALSE 'F' |
| #define TYPE_TRUE 'T' |
| #define TYPE_STOPITER 'S' |
| #define TYPE_ELLIPSIS '.' |
| #define TYPE_INT 'i' |
| #define TYPE_FLOAT 'f' |
| #define TYPE_BINARY_FLOAT 'g' |
| #define TYPE_COMPLEX 'x' |
| #define TYPE_BINARY_COMPLEX 'y' |
| #define TYPE_LONG 'l' |
| #define TYPE_STRING 's' |
| #define TYPE_INTERNED 't' |
| #define TYPE_REF 'r' |
| #define TYPE_TUPLE '(' |
| #define TYPE_LIST '[' |
| #define TYPE_DICT '{' |
| #define TYPE_CODE 'c' |
| #define TYPE_UNICODE 'u' |
| #define TYPE_UNKNOWN '?' |
| #define TYPE_SET '<' |
| #define TYPE_FROZENSET '>' |
| #define FLAG_REF '\x80' /* with a type, add obj to index */ |
| |
| #define TYPE_ASCII 'a' |
| #define TYPE_ASCII_INTERNED 'A' |
| #define TYPE_SMALL_TUPLE ')' |
| #define TYPE_SHORT_ASCII 'z' |
| #define TYPE_SHORT_ASCII_INTERNED 'Z' |
| |
| #define WFERR_OK 0 |
| #define WFERR_UNMARSHALLABLE 1 |
| #define WFERR_NESTEDTOODEEP 2 |
| #define WFERR_NOMEMORY 3 |
| |
| typedef struct { |
| FILE *fp; |
| int error; /* see WFERR_* values */ |
| int depth; |
| /* If fp == NULL, the following are valid: */ |
| PyObject *readable; /* Stream-like object being read from */ |
| PyObject *str; |
| PyObject *current_filename; |
| char *ptr; |
| char *end; |
| char *buf; |
| Py_ssize_t buf_size; |
| PyObject *refs; /* dict on marshal, list on unmarshal */ |
| int version; |
| } WFILE; |
| |
| #define w_byte(c, p) if (((p)->fp)) putc((c), (p)->fp); \ |
| else if ((p)->ptr != (p)->end) *(p)->ptr++ = (c); \ |
| else w_more((c), p) |
| |
| static void |
| w_more(char c, WFILE *p) |
| { |
| Py_ssize_t size, newsize; |
| if (p->str == NULL) |
| return; /* An error already occurred */ |
| size = PyBytes_Size(p->str); |
| newsize = size + size + 1024; |
| if (newsize > 32*1024*1024) { |
| newsize = size + (size >> 3); /* 12.5% overallocation */ |
| } |
| if (_PyBytes_Resize(&p->str, newsize) != 0) { |
| p->ptr = p->end = NULL; |
| } |
| else { |
| p->ptr = PyBytes_AS_STRING((PyBytesObject *)p->str) + size; |
| p->end = |
| PyBytes_AS_STRING((PyBytesObject *)p->str) + newsize; |
| *p->ptr++ = c; |
| } |
| } |
| |
| static void |
| w_string(const char *s, Py_ssize_t n, WFILE *p) |
| { |
| if (p->fp != NULL) { |
| fwrite(s, 1, n, p->fp); |
| } |
| else { |
| while (--n >= 0) { |
| w_byte(*s, p); |
| s++; |
| } |
| } |
| } |
| |
| static void |
| w_short(int x, WFILE *p) |
| { |
| w_byte((char)( x & 0xff), p); |
| w_byte((char)((x>> 8) & 0xff), p); |
| } |
| |
| static void |
| w_long(long x, WFILE *p) |
| { |
| w_byte((char)( x & 0xff), p); |
| w_byte((char)((x>> 8) & 0xff), p); |
| w_byte((char)((x>>16) & 0xff), p); |
| w_byte((char)((x>>24) & 0xff), p); |
| } |
| |
| #define SIZE32_MAX 0x7FFFFFFF |
| |
| #if SIZEOF_SIZE_T > 4 |
| # define W_SIZE(n, p) do { \ |
| if ((n) > SIZE32_MAX) { \ |
| (p)->depth--; \ |
| (p)->error = WFERR_UNMARSHALLABLE; \ |
| return; \ |
| } \ |
| w_long((long)(n), p); \ |
| } while(0) |
| #else |
| # define W_SIZE w_long |
| #endif |
| |
| static void |
| w_pstring(const char *s, Py_ssize_t n, WFILE *p) |
| { |
| W_SIZE(n, p); |
| w_string(s, n, p); |
| } |
| |
| static void |
| w_short_pstring(const char *s, Py_ssize_t n, WFILE *p) |
| { |
| w_byte(Py_SAFE_DOWNCAST(n, Py_ssize_t, unsigned char), p); |
| w_string(s, n, p); |
| } |
| |
| /* We assume that Python ints are stored internally in base some power of |
| 2**15; for the sake of portability we'll always read and write them in base |
| exactly 2**15. */ |
| |
| #define PyLong_MARSHAL_SHIFT 15 |
| #define PyLong_MARSHAL_BASE ((short)1 << PyLong_MARSHAL_SHIFT) |
| #define PyLong_MARSHAL_MASK (PyLong_MARSHAL_BASE - 1) |
| #if PyLong_SHIFT % PyLong_MARSHAL_SHIFT != 0 |
| #error "PyLong_SHIFT must be a multiple of PyLong_MARSHAL_SHIFT" |
| #endif |
| #define PyLong_MARSHAL_RATIO (PyLong_SHIFT / PyLong_MARSHAL_SHIFT) |
| |
| #define W_TYPE(t, p) do { \ |
| w_byte((t) | flag, (p)); \ |
| } while(0) |
| |
| static void |
| w_PyLong(const PyLongObject *ob, char flag, WFILE *p) |
| { |
| Py_ssize_t i, j, n, l; |
| digit d; |
| |
| W_TYPE(TYPE_LONG, p); |
| if (Py_SIZE(ob) == 0) { |
| w_long((long)0, p); |
| return; |
| } |
| |
| /* set l to number of base PyLong_MARSHAL_BASE digits */ |
| n = ABS(Py_SIZE(ob)); |
| l = (n-1) * PyLong_MARSHAL_RATIO; |
| d = ob->ob_digit[n-1]; |
| assert(d != 0); /* a PyLong is always normalized */ |
| do { |
| d >>= PyLong_MARSHAL_SHIFT; |
| l++; |
| } while (d != 0); |
| if (l > SIZE32_MAX) { |
| p->depth--; |
| p->error = WFERR_UNMARSHALLABLE; |
| return; |
| } |
| w_long((long)(Py_SIZE(ob) > 0 ? l : -l), p); |
| |
| for (i=0; i < n-1; i++) { |
| d = ob->ob_digit[i]; |
| for (j=0; j < PyLong_MARSHAL_RATIO; j++) { |
| w_short(d & PyLong_MARSHAL_MASK, p); |
| d >>= PyLong_MARSHAL_SHIFT; |
| } |
| assert (d == 0); |
| } |
| d = ob->ob_digit[n-1]; |
| do { |
| w_short(d & PyLong_MARSHAL_MASK, p); |
| d >>= PyLong_MARSHAL_SHIFT; |
| } while (d != 0); |
| } |
| |
| static int |
| w_ref(PyObject *v, char *flag, WFILE *p) |
| { |
| PyObject *id; |
| PyObject *idx; |
| |
| if (p->version < 3 || p->refs == NULL) |
| return 0; /* not writing object references */ |
| |
| /* if it has only one reference, it definitely isn't shared */ |
| if (Py_REFCNT(v) == 1) |
| return 0; |
| |
| id = PyLong_FromVoidPtr((void*)v); |
| if (id == NULL) |
| goto err; |
| idx = PyDict_GetItem(p->refs, id); |
| if (idx != NULL) { |
| /* write the reference index to the stream */ |
| long w = PyLong_AsLong(idx); |
| Py_DECREF(id); |
| if (w == -1 && PyErr_Occurred()) { |
| goto err; |
| } |
| /* we don't store "long" indices in the dict */ |
| assert(0 <= w && w <= 0x7fffffff); |
| w_byte(TYPE_REF, p); |
| w_long(w, p); |
| return 1; |
| } else { |
| int ok; |
| Py_ssize_t s = PyDict_Size(p->refs); |
| /* we don't support long indices */ |
| if (s >= 0x7fffffff) { |
| PyErr_SetString(PyExc_ValueError, "too many objects"); |
| goto err; |
| } |
| idx = PyLong_FromSsize_t(s); |
| ok = idx && PyDict_SetItem(p->refs, id, idx) == 0; |
| Py_DECREF(id); |
| Py_XDECREF(idx); |
| if (!ok) |
| goto err; |
| *flag |= FLAG_REF; |
| return 0; |
| } |
| err: |
| p->error = WFERR_UNMARSHALLABLE; |
| return 1; |
| } |
| |
| static void |
| w_complex_object(PyObject *v, char flag, WFILE *p); |
| |
| static void |
| w_object(PyObject *v, WFILE *p) |
| { |
| char flag = '\0'; |
| |
| p->depth++; |
| |
| if (p->depth > MAX_MARSHAL_STACK_DEPTH) { |
| p->error = WFERR_NESTEDTOODEEP; |
| } |
| else if (v == NULL) { |
| w_byte(TYPE_NULL, p); |
| } |
| else if (v == Py_None) { |
| w_byte(TYPE_NONE, p); |
| } |
| else if (v == PyExc_StopIteration) { |
| w_byte(TYPE_STOPITER, p); |
| } |
| else if (v == Py_Ellipsis) { |
| w_byte(TYPE_ELLIPSIS, p); |
| } |
| else if (v == Py_False) { |
| w_byte(TYPE_FALSE, p); |
| } |
| else if (v == Py_True) { |
| w_byte(TYPE_TRUE, p); |
| } |
| else if (!w_ref(v, &flag, p)) |
| w_complex_object(v, flag, p); |
| |
| p->depth--; |
| } |
| |
| static void |
| w_complex_object(PyObject *v, char flag, WFILE *p) |
| { |
| Py_ssize_t i, n; |
| |
| if (PyLong_CheckExact(v)) { |
| long x = PyLong_AsLong(v); |
| if ((x == -1) && PyErr_Occurred()) { |
| PyLongObject *ob = (PyLongObject *)v; |
| PyErr_Clear(); |
| w_PyLong(ob, flag, p); |
| } |
| else { |
| #if SIZEOF_LONG > 4 |
| long y = Py_ARITHMETIC_RIGHT_SHIFT(long, x, 31); |
| if (y && y != -1) { |
| /* Too large for TYPE_INT */ |
| w_PyLong((PyLongObject*)v, flag, p); |
| } |
| else |
| #endif |
| { |
| W_TYPE(TYPE_INT, p); |
| w_long(x, p); |
| } |
| } |
| } |
| else if (PyFloat_CheckExact(v)) { |
| if (p->version > 1) { |
| unsigned char buf[8]; |
| if (_PyFloat_Pack8(PyFloat_AsDouble(v), |
| buf, 1) < 0) { |
| p->error = WFERR_UNMARSHALLABLE; |
| return; |
| } |
| W_TYPE(TYPE_BINARY_FLOAT, p); |
| w_string((char*)buf, 8, p); |
| } |
| else { |
| char *buf = PyOS_double_to_string(PyFloat_AS_DOUBLE(v), |
| 'g', 17, 0, NULL); |
| if (!buf) { |
| p->error = WFERR_NOMEMORY; |
| return; |
| } |
| n = strlen(buf); |
| W_TYPE(TYPE_FLOAT, p); |
| w_byte((int)n, p); |
| w_string(buf, n, p); |
| PyMem_Free(buf); |
| } |
| } |
| else if (PyComplex_CheckExact(v)) { |
| if (p->version > 1) { |
| unsigned char buf[8]; |
| if (_PyFloat_Pack8(PyComplex_RealAsDouble(v), |
| buf, 1) < 0) { |
| p->error = WFERR_UNMARSHALLABLE; |
| return; |
| } |
| W_TYPE(TYPE_BINARY_COMPLEX, p); |
| w_string((char*)buf, 8, p); |
| if (_PyFloat_Pack8(PyComplex_ImagAsDouble(v), |
| buf, 1) < 0) { |
| p->error = WFERR_UNMARSHALLABLE; |
| return; |
| } |
| w_string((char*)buf, 8, p); |
| } |
| else { |
| char *buf; |
| W_TYPE(TYPE_COMPLEX, p); |
| buf = PyOS_double_to_string(PyComplex_RealAsDouble(v), |
| 'g', 17, 0, NULL); |
| if (!buf) { |
| p->error = WFERR_NOMEMORY; |
| return; |
| } |
| n = strlen(buf); |
| w_byte((int)n, p); |
| w_string(buf, n, p); |
| PyMem_Free(buf); |
| buf = PyOS_double_to_string(PyComplex_ImagAsDouble(v), |
| 'g', 17, 0, NULL); |
| if (!buf) { |
| p->error = WFERR_NOMEMORY; |
| return; |
| } |
| n = strlen(buf); |
| w_byte((int)n, p); |
| w_string(buf, n, p); |
| PyMem_Free(buf); |
| } |
| } |
| else if (PyBytes_CheckExact(v)) { |
| W_TYPE(TYPE_STRING, p); |
| w_pstring(PyBytes_AS_STRING(v), PyBytes_GET_SIZE(v), p); |
| } |
| else if (PyUnicode_CheckExact(v)) { |
| if (p->version >= 4 && PyUnicode_IS_ASCII(v)) { |
| int is_short = PyUnicode_GET_LENGTH(v) < 256; |
| if (is_short) { |
| if (PyUnicode_CHECK_INTERNED(v)) |
| W_TYPE(TYPE_SHORT_ASCII_INTERNED, p); |
| else |
| W_TYPE(TYPE_SHORT_ASCII, p); |
| w_short_pstring((char *) PyUnicode_1BYTE_DATA(v), |
| PyUnicode_GET_LENGTH(v), p); |
| } |
| else { |
| if (PyUnicode_CHECK_INTERNED(v)) |
| W_TYPE(TYPE_ASCII_INTERNED, p); |
| else |
| W_TYPE(TYPE_ASCII, p); |
| w_pstring((char *) PyUnicode_1BYTE_DATA(v), |
| PyUnicode_GET_LENGTH(v), p); |
| } |
| } |
| else { |
| PyObject *utf8; |
| utf8 = PyUnicode_AsEncodedString(v, "utf8", "surrogatepass"); |
| if (utf8 == NULL) { |
| p->depth--; |
| p->error = WFERR_UNMARSHALLABLE; |
| return; |
| } |
| if (p->version >= 3 && PyUnicode_CHECK_INTERNED(v)) |
| W_TYPE(TYPE_INTERNED, p); |
| else |
| W_TYPE(TYPE_UNICODE, p); |
| w_pstring(PyBytes_AS_STRING(utf8), PyBytes_GET_SIZE(utf8), p); |
| Py_DECREF(utf8); |
| } |
| } |
| else if (PyTuple_CheckExact(v)) { |
| n = PyTuple_Size(v); |
| if (p->version >= 4 && n < 256) { |
| W_TYPE(TYPE_SMALL_TUPLE, p); |
| w_byte((unsigned char)n, p); |
| } |
| else { |
| W_TYPE(TYPE_TUPLE, p); |
| W_SIZE(n, p); |
| } |
| for (i = 0; i < n; i++) { |
| w_object(PyTuple_GET_ITEM(v, i), p); |
| } |
| } |
| else if (PyList_CheckExact(v)) { |
| W_TYPE(TYPE_LIST, p); |
| n = PyList_GET_SIZE(v); |
| W_SIZE(n, p); |
| for (i = 0; i < n; i++) { |
| w_object(PyList_GET_ITEM(v, i), p); |
| } |
| } |
| else if (PyDict_CheckExact(v)) { |
| Py_ssize_t pos; |
| PyObject *key, *value; |
| W_TYPE(TYPE_DICT, p); |
| /* This one is NULL object terminated! */ |
| pos = 0; |
| while (PyDict_Next(v, &pos, &key, &value)) { |
| w_object(key, p); |
| w_object(value, p); |
| } |
| w_object((PyObject *)NULL, p); |
| } |
| else if (PyAnySet_CheckExact(v)) { |
| PyObject *value, *it; |
| |
| if (PyObject_TypeCheck(v, &PySet_Type)) |
| W_TYPE(TYPE_SET, p); |
| else |
| W_TYPE(TYPE_FROZENSET, p); |
| n = PyObject_Size(v); |
| if (n == -1) { |
| p->depth--; |
| p->error = WFERR_UNMARSHALLABLE; |
| return; |
| } |
| W_SIZE(n, p); |
| it = PyObject_GetIter(v); |
| if (it == NULL) { |
| p->depth--; |
| p->error = WFERR_UNMARSHALLABLE; |
| return; |
| } |
| while ((value = PyIter_Next(it)) != NULL) { |
| w_object(value, p); |
| Py_DECREF(value); |
| } |
| Py_DECREF(it); |
| if (PyErr_Occurred()) { |
| p->depth--; |
| p->error = WFERR_UNMARSHALLABLE; |
| return; |
| } |
| } |
| else if (PyCode_Check(v)) { |
| PyCodeObject *co = (PyCodeObject *)v; |
| W_TYPE(TYPE_CODE, p); |
| w_long(co->co_argcount, p); |
| w_long(co->co_kwonlyargcount, p); |
| w_long(co->co_nlocals, p); |
| w_long(co->co_stacksize, p); |
| w_long(co->co_flags, p); |
| w_object(co->co_code, p); |
| w_object(co->co_consts, p); |
| w_object(co->co_names, p); |
| w_object(co->co_varnames, p); |
| w_object(co->co_freevars, p); |
| w_object(co->co_cellvars, p); |
| w_object(co->co_filename, p); |
| w_object(co->co_name, p); |
| w_long(co->co_firstlineno, p); |
| w_object(co->co_lnotab, p); |
| } |
| else if (PyObject_CheckBuffer(v)) { |
| /* Write unknown buffer-style objects as a string */ |
| Py_buffer view; |
| if (PyObject_GetBuffer(v, &view, PyBUF_SIMPLE) != 0) { |
| w_byte(TYPE_UNKNOWN, p); |
| p->depth--; |
| p->error = WFERR_UNMARSHALLABLE; |
| return; |
| } |
| W_TYPE(TYPE_STRING, p); |
| w_pstring(view.buf, view.len, p); |
| PyBuffer_Release(&view); |
| } |
| else { |
| W_TYPE(TYPE_UNKNOWN, p); |
| p->error = WFERR_UNMARSHALLABLE; |
| } |
| } |
| |
| /* version currently has no effect for writing ints. */ |
| void |
| PyMarshal_WriteLongToFile(long x, FILE *fp, int version) |
| { |
| WFILE wf; |
| wf.fp = fp; |
| wf.error = WFERR_OK; |
| wf.depth = 0; |
| wf.refs = NULL; |
| wf.version = version; |
| w_long(x, &wf); |
| } |
| |
| void |
| PyMarshal_WriteObjectToFile(PyObject *x, FILE *fp, int version) |
| { |
| WFILE wf; |
| wf.fp = fp; |
| wf.error = WFERR_OK; |
| wf.depth = 0; |
| if (version >= 3) { |
| if ((wf.refs = PyDict_New()) == NULL) |
| return; /* caller mush check PyErr_Occurred() */ |
| } else |
| wf.refs = NULL; |
| wf.version = version; |
| w_object(x, &wf); |
| Py_XDECREF(wf.refs); |
| } |
| |
| typedef WFILE RFILE; /* Same struct with different invariants */ |
| |
| static char * |
| r_string(Py_ssize_t n, RFILE *p) |
| { |
| Py_ssize_t read = -1; |
| |
| if (p->ptr != NULL) { |
| /* Fast path for loads() */ |
| char *res = p->ptr; |
| Py_ssize_t left = p->end - p->ptr; |
| if (left < n) { |
| PyErr_SetString(PyExc_EOFError, |
| "marshal data too short"); |
| return NULL; |
| } |
| p->ptr += n; |
| return res; |
| } |
| if (p->buf == NULL) { |
| p->buf = PyMem_MALLOC(n); |
| if (p->buf == NULL) { |
| PyErr_NoMemory(); |
| return NULL; |
| } |
| p->buf_size = n; |
| } |
| else if (p->buf_size < n) { |
| p->buf = PyMem_REALLOC(p->buf, n); |
| if (p->buf == NULL) { |
| PyErr_NoMemory(); |
| return NULL; |
| } |
| p->buf_size = n; |
| } |
| |
| if (!p->readable) { |
| assert(p->fp != NULL); |
| read = fread(p->buf, 1, n, p->fp); |
| } |
| else { |
| _Py_IDENTIFIER(readinto); |
| PyObject *res, *mview; |
| Py_buffer buf; |
| |
| if (PyBuffer_FillInfo(&buf, NULL, p->buf, n, 0, PyBUF_CONTIG) == -1) |
| return NULL; |
| mview = PyMemoryView_FromBuffer(&buf); |
| if (mview == NULL) |
| return NULL; |
| |
| res = _PyObject_CallMethodId(p->readable, &PyId_readinto, "N", mview); |
| if (res != NULL) { |
| read = PyNumber_AsSsize_t(res, PyExc_ValueError); |
| Py_DECREF(res); |
| } |
| } |
| if (read != n) { |
| if (!PyErr_Occurred()) { |
| if (read > n) |
| PyErr_Format(PyExc_ValueError, |
| "read() returned too much data: " |
| "%zd bytes requested, %zd returned", |
| n, read); |
| else |
| PyErr_SetString(PyExc_EOFError, |
| "EOF read where not expected"); |
| } |
| return NULL; |
| } |
| return p->buf; |
| } |
| |
| static int |
| r_byte(RFILE *p) |
| { |
| int c = EOF; |
| |
| if (p->ptr != NULL) { |
| if (p->ptr < p->end) |
| c = (unsigned char) *p->ptr++; |
| return c; |
| } |
| if (!p->readable) { |
| assert(p->fp); |
| c = getc(p->fp); |
| } |
| else { |
| char *ptr = r_string(1, p); |
| if (ptr != NULL) |
| c = *(unsigned char *) ptr; |
| } |
| return c; |
| } |
| |
| static int |
| r_short(RFILE *p) |
| { |
| short x = -1; |
| unsigned char *buffer; |
| |
| buffer = (unsigned char *) r_string(2, p); |
| if (buffer != NULL) { |
| x = buffer[0]; |
| x |= buffer[1] << 8; |
| /* Sign-extension, in case short greater than 16 bits */ |
| x |= -(x & 0x8000); |
| } |
| return x; |
| } |
| |
| static long |
| r_long(RFILE *p) |
| { |
| long x = -1; |
| unsigned char *buffer; |
| |
| buffer = (unsigned char *) r_string(4, p); |
| if (buffer != NULL) { |
| x = buffer[0]; |
| x |= (long)buffer[1] << 8; |
| x |= (long)buffer[2] << 16; |
| x |= (long)buffer[3] << 24; |
| #if SIZEOF_LONG > 4 |
| /* Sign extension for 64-bit machines */ |
| x |= -(x & 0x80000000L); |
| #endif |
| } |
| return x; |
| } |
| |
| static PyObject * |
| r_PyLong(RFILE *p) |
| { |
| PyLongObject *ob; |
| long n, size, i; |
| int j, md, shorts_in_top_digit; |
| digit d; |
| |
| n = r_long(p); |
| if (PyErr_Occurred()) |
| return NULL; |
| if (n == 0) |
| return (PyObject *)_PyLong_New(0); |
| if (n < -SIZE32_MAX || n > SIZE32_MAX) { |
| PyErr_SetString(PyExc_ValueError, |
| "bad marshal data (long size out of range)"); |
| return NULL; |
| } |
| |
| size = 1 + (ABS(n) - 1) / PyLong_MARSHAL_RATIO; |
| shorts_in_top_digit = 1 + (ABS(n) - 1) % PyLong_MARSHAL_RATIO; |
| ob = _PyLong_New(size); |
| if (ob == NULL) |
| return NULL; |
| |
| Py_SIZE(ob) = n > 0 ? size : -size; |
| |
| for (i = 0; i < size-1; i++) { |
| d = 0; |
| for (j=0; j < PyLong_MARSHAL_RATIO; j++) { |
| md = r_short(p); |
| if (PyErr_Occurred()) { |
| Py_DECREF(ob); |
| return NULL; |
| } |
| if (md < 0 || md > PyLong_MARSHAL_BASE) |
| goto bad_digit; |
| d += (digit)md << j*PyLong_MARSHAL_SHIFT; |
| } |
| ob->ob_digit[i] = d; |
| } |
| |
| d = 0; |
| for (j=0; j < shorts_in_top_digit; j++) { |
| md = r_short(p); |
| if (PyErr_Occurred()) { |
| Py_DECREF(ob); |
| return NULL; |
| } |
| if (md < 0 || md > PyLong_MARSHAL_BASE) |
| goto bad_digit; |
| /* topmost marshal digit should be nonzero */ |
| if (md == 0 && j == shorts_in_top_digit - 1) { |
| Py_DECREF(ob); |
| PyErr_SetString(PyExc_ValueError, |
| "bad marshal data (unnormalized long data)"); |
| return NULL; |
| } |
| d += (digit)md << j*PyLong_MARSHAL_SHIFT; |
| } |
| if (PyErr_Occurred()) { |
| Py_DECREF(ob); |
| return NULL; |
| } |
| /* top digit should be nonzero, else the resulting PyLong won't be |
| normalized */ |
| ob->ob_digit[size-1] = d; |
| return (PyObject *)ob; |
| bad_digit: |
| Py_DECREF(ob); |
| PyErr_SetString(PyExc_ValueError, |
| "bad marshal data (digit out of range in long)"); |
| return NULL; |
| } |
| |
| /* allocate the reflist index for a new object. Return -1 on failure */ |
| static Py_ssize_t |
| r_ref_reserve(int flag, RFILE *p) |
| { |
| if (flag) { /* currently only FLAG_REF is defined */ |
| Py_ssize_t idx = PyList_GET_SIZE(p->refs); |
| if (idx >= 0x7ffffffe) { |
| PyErr_SetString(PyExc_ValueError, "bad marshal data (index list too large)"); |
| return -1; |
| } |
| if (PyList_Append(p->refs, Py_None) < 0) |
| return -1; |
| return idx; |
| } else |
| return 0; |
| } |
| |
| /* insert the new object 'o' to the reflist at previously |
| * allocated index 'idx'. |
| * 'o' can be NULL, in which case nothing is done. |
| * if 'o' was non-NULL, and the function succeeds, 'o' is returned. |
| * if 'o' was non-NULL, and the function fails, 'o' is released and |
| * NULL returned. This simplifies error checking at the call site since |
| * a single test for NULL for the function result is enough. |
| */ |
| static PyObject * |
| r_ref_insert(PyObject *o, Py_ssize_t idx, int flag, RFILE *p) |
| { |
| if (o != NULL && flag) { /* currently only FLAG_REF is defined */ |
| PyObject *tmp = PyList_GET_ITEM(p->refs, idx); |
| Py_INCREF(o); |
| PyList_SET_ITEM(p->refs, idx, o); |
| Py_DECREF(tmp); |
| } |
| return o; |
| } |
| |
| /* combination of both above, used when an object can be |
| * created whenever it is seen in the file, as opposed to |
| * after having loaded its sub-objects. |
| */ |
| static PyObject * |
| r_ref(PyObject *o, int flag, RFILE *p) |
| { |
| assert(flag & FLAG_REF); |
| if (o == NULL) |
| return NULL; |
| if (PyList_Append(p->refs, o) < 0) { |
| Py_DECREF(o); /* release the new object */ |
| return NULL; |
| } |
| return o; |
| } |
| |
| static PyObject * |
| r_object(RFILE *p) |
| { |
| /* NULL is a valid return value, it does not necessarily means that |
| an exception is set. */ |
| PyObject *v, *v2; |
| Py_ssize_t idx = 0; |
| long i, n; |
| int type, code = r_byte(p); |
| int flag, is_interned = 0; |
| PyObject *retval = NULL; |
| |
| if (code == EOF) { |
| PyErr_SetString(PyExc_EOFError, |
| "EOF read where object expected"); |
| return NULL; |
| } |
| |
| p->depth++; |
| |
| if (p->depth > MAX_MARSHAL_STACK_DEPTH) { |
| p->depth--; |
| PyErr_SetString(PyExc_ValueError, "recursion limit exceeded"); |
| return NULL; |
| } |
| |
| flag = code & FLAG_REF; |
| type = code & ~FLAG_REF; |
| |
| #define R_REF(O) do{\ |
| if (flag) \ |
| O = r_ref(O, flag, p);\ |
| } while (0) |
| |
| switch (type) { |
| |
| case TYPE_NULL: |
| break; |
| |
| case TYPE_NONE: |
| Py_INCREF(Py_None); |
| retval = Py_None; |
| break; |
| |
| case TYPE_STOPITER: |
| Py_INCREF(PyExc_StopIteration); |
| retval = PyExc_StopIteration; |
| break; |
| |
| case TYPE_ELLIPSIS: |
| Py_INCREF(Py_Ellipsis); |
| retval = Py_Ellipsis; |
| break; |
| |
| case TYPE_FALSE: |
| Py_INCREF(Py_False); |
| retval = Py_False; |
| break; |
| |
| case TYPE_TRUE: |
| Py_INCREF(Py_True); |
| retval = Py_True; |
| break; |
| |
| case TYPE_INT: |
| n = r_long(p); |
| retval = PyErr_Occurred() ? NULL : PyLong_FromLong(n); |
| R_REF(retval); |
| break; |
| |
| case TYPE_LONG: |
| retval = r_PyLong(p); |
| R_REF(retval); |
| break; |
| |
| case TYPE_FLOAT: |
| { |
| char buf[256], *ptr; |
| double dx; |
| n = r_byte(p); |
| if (n == EOF) { |
| PyErr_SetString(PyExc_EOFError, |
| "EOF read where object expected"); |
| break; |
| } |
| ptr = r_string(n, p); |
| if (ptr == NULL) |
| break; |
| memcpy(buf, ptr, n); |
| buf[n] = '\0'; |
| dx = PyOS_string_to_double(buf, NULL, NULL); |
| if (dx == -1.0 && PyErr_Occurred()) |
| break; |
| retval = PyFloat_FromDouble(dx); |
| R_REF(retval); |
| break; |
| } |
| |
| case TYPE_BINARY_FLOAT: |
| { |
| unsigned char *buf; |
| double x; |
| buf = (unsigned char *) r_string(8, p); |
| if (buf == NULL) |
| break; |
| x = _PyFloat_Unpack8(buf, 1); |
| if (x == -1.0 && PyErr_Occurred()) |
| break; |
| retval = PyFloat_FromDouble(x); |
| R_REF(retval); |
| break; |
| } |
| |
| case TYPE_COMPLEX: |
| { |
| char buf[256], *ptr; |
| Py_complex c; |
| n = r_byte(p); |
| if (n == EOF) { |
| PyErr_SetString(PyExc_EOFError, |
| "EOF read where object expected"); |
| break; |
| } |
| ptr = r_string(n, p); |
| if (ptr == NULL) |
| break; |
| memcpy(buf, ptr, n); |
| buf[n] = '\0'; |
| c.real = PyOS_string_to_double(buf, NULL, NULL); |
| if (c.real == -1.0 && PyErr_Occurred()) |
| break; |
| n = r_byte(p); |
| if (n == EOF) { |
| PyErr_SetString(PyExc_EOFError, |
| "EOF read where object expected"); |
| break; |
| } |
| ptr = r_string(n, p); |
| if (ptr == NULL) |
| break; |
| memcpy(buf, ptr, n); |
| buf[n] = '\0'; |
| c.imag = PyOS_string_to_double(buf, NULL, NULL); |
| if (c.imag == -1.0 && PyErr_Occurred()) |
| break; |
| retval = PyComplex_FromCComplex(c); |
| R_REF(retval); |
| break; |
| } |
| |
| case TYPE_BINARY_COMPLEX: |
| { |
| unsigned char *buf; |
| Py_complex c; |
| buf = (unsigned char *) r_string(8, p); |
| if (buf == NULL) |
| break; |
| c.real = _PyFloat_Unpack8(buf, 1); |
| if (c.real == -1.0 && PyErr_Occurred()) |
| break; |
| buf = (unsigned char *) r_string(8, p); |
| if (buf == NULL) |
| break; |
| c.imag = _PyFloat_Unpack8(buf, 1); |
| if (c.imag == -1.0 && PyErr_Occurred()) |
| break; |
| retval = PyComplex_FromCComplex(c); |
| R_REF(retval); |
| break; |
| } |
| |
| case TYPE_STRING: |
| { |
| char *ptr; |
| n = r_long(p); |
| if (PyErr_Occurred()) |
| break; |
| if (n < 0 || n > SIZE32_MAX) { |
| PyErr_SetString(PyExc_ValueError, "bad marshal data (string size out of range)"); |
| break; |
| } |
| v = PyBytes_FromStringAndSize((char *)NULL, n); |
| if (v == NULL) |
| break; |
| ptr = r_string(n, p); |
| if (ptr == NULL) { |
| Py_DECREF(v); |
| break; |
| } |
| memcpy(PyBytes_AS_STRING(v), ptr, n); |
| retval = v; |
| R_REF(retval); |
| break; |
| } |
| |
| case TYPE_ASCII_INTERNED: |
| is_interned = 1; |
| case TYPE_ASCII: |
| n = r_long(p); |
| if (PyErr_Occurred()) |
| break; |
| if (n < 0 || n > SIZE32_MAX) { |
| PyErr_SetString(PyExc_ValueError, "bad marshal data (unicode size out of range)"); |
| break; |
| } |
| goto _read_ascii; |
| |
| case TYPE_SHORT_ASCII_INTERNED: |
| is_interned = 1; |
| case TYPE_SHORT_ASCII: |
| n = r_byte(p); |
| if (n == EOF) { |
| PyErr_SetString(PyExc_EOFError, |
| "EOF read where object expected"); |
| break; |
| } |
| _read_ascii: |
| { |
| char *ptr; |
| ptr = r_string(n, p); |
| if (ptr == NULL) |
| break; |
| v = PyUnicode_FromKindAndData(PyUnicode_1BYTE_KIND, ptr, n); |
| if (v == NULL) |
| break; |
| if (is_interned) |
| PyUnicode_InternInPlace(&v); |
| retval = v; |
| R_REF(retval); |
| break; |
| } |
| |
| case TYPE_INTERNED: |
| is_interned = 1; |
| case TYPE_UNICODE: |
| { |
| char *buffer; |
| |
| n = r_long(p); |
| if (PyErr_Occurred()) |
| break; |
| if (n < 0 || n > SIZE32_MAX) { |
| PyErr_SetString(PyExc_ValueError, "bad marshal data (unicode size out of range)"); |
| break; |
| } |
| if (n != 0) { |
| buffer = r_string(n, p); |
| if (buffer == NULL) |
| break; |
| v = PyUnicode_DecodeUTF8(buffer, n, "surrogatepass"); |
| } |
| else { |
| v = PyUnicode_New(0, 0); |
| } |
| if (v == NULL) |
| break; |
| if (is_interned) |
| PyUnicode_InternInPlace(&v); |
| retval = v; |
| R_REF(retval); |
| break; |
| } |
| |
| case TYPE_SMALL_TUPLE: |
| n = (unsigned char) r_byte(p); |
| if (PyErr_Occurred()) |
| break; |
| goto _read_tuple; |
| case TYPE_TUPLE: |
| n = r_long(p); |
| if (PyErr_Occurred()) |
| break; |
| if (n < 0 || n > SIZE32_MAX) { |
| PyErr_SetString(PyExc_ValueError, "bad marshal data (tuple size out of range)"); |
| break; |
| } |
| _read_tuple: |
| v = PyTuple_New(n); |
| R_REF(v); |
| if (v == NULL) |
| break; |
| |
| for (i = 0; i < n; i++) { |
| v2 = r_object(p); |
| if ( v2 == NULL ) { |
| if (!PyErr_Occurred()) |
| PyErr_SetString(PyExc_TypeError, |
| "NULL object in marshal data for tuple"); |
| Py_DECREF(v); |
| v = NULL; |
| break; |
| } |
| PyTuple_SET_ITEM(v, i, v2); |
| } |
| retval = v; |
| break; |
| |
| case TYPE_LIST: |
| n = r_long(p); |
| if (PyErr_Occurred()) |
| break; |
| if (n < 0 || n > SIZE32_MAX) { |
| PyErr_SetString(PyExc_ValueError, "bad marshal data (list size out of range)"); |
| break; |
| } |
| v = PyList_New(n); |
| R_REF(v); |
| if (v == NULL) |
| break; |
| for (i = 0; i < n; i++) { |
| v2 = r_object(p); |
| if ( v2 == NULL ) { |
| if (!PyErr_Occurred()) |
| PyErr_SetString(PyExc_TypeError, |
| "NULL object in marshal data for list"); |
| Py_DECREF(v); |
| v = NULL; |
| break; |
| } |
| PyList_SET_ITEM(v, i, v2); |
| } |
| retval = v; |
| break; |
| |
| case TYPE_DICT: |
| v = PyDict_New(); |
| R_REF(v); |
| if (v == NULL) |
| break; |
| for (;;) { |
| PyObject *key, *val; |
| key = r_object(p); |
| if (key == NULL) |
| break; |
| val = r_object(p); |
| if (val == NULL) { |
| Py_DECREF(key); |
| break; |
| } |
| if (PyDict_SetItem(v, key, val) < 0) { |
| Py_DECREF(key); |
| Py_DECREF(val); |
| break; |
| } |
| Py_DECREF(key); |
| Py_DECREF(val); |
| } |
| if (PyErr_Occurred()) { |
| Py_DECREF(v); |
| v = NULL; |
| } |
| retval = v; |
| break; |
| |
| case TYPE_SET: |
| case TYPE_FROZENSET: |
| n = r_long(p); |
| if (PyErr_Occurred()) |
| break; |
| if (n < 0 || n > SIZE32_MAX) { |
| PyErr_SetString(PyExc_ValueError, "bad marshal data (set size out of range)"); |
| break; |
| } |
| v = (type == TYPE_SET) ? PySet_New(NULL) : PyFrozenSet_New(NULL); |
| if (type == TYPE_SET) { |
| R_REF(v); |
| } else { |
| /* must use delayed registration of frozensets because they must |
| * be init with a refcount of 1 |
| */ |
| idx = r_ref_reserve(flag, p); |
| if (idx < 0) |
| Py_CLEAR(v); /* signal error */ |
| } |
| if (v == NULL) |
| break; |
| |
| for (i = 0; i < n; i++) { |
| v2 = r_object(p); |
| if ( v2 == NULL ) { |
| if (!PyErr_Occurred()) |
| PyErr_SetString(PyExc_TypeError, |
| "NULL object in marshal data for set"); |
| Py_DECREF(v); |
| v = NULL; |
| break; |
| } |
| if (PySet_Add(v, v2) == -1) { |
| Py_DECREF(v); |
| Py_DECREF(v2); |
| v = NULL; |
| break; |
| } |
| Py_DECREF(v2); |
| } |
| if (type != TYPE_SET) |
| v = r_ref_insert(v, idx, flag, p); |
| retval = v; |
| break; |
| |
| case TYPE_CODE: |
| { |
| int argcount; |
| int kwonlyargcount; |
| int nlocals; |
| int stacksize; |
| int flags; |
| PyObject *code = NULL; |
| PyObject *consts = NULL; |
| PyObject *names = NULL; |
| PyObject *varnames = NULL; |
| PyObject *freevars = NULL; |
| PyObject *cellvars = NULL; |
| PyObject *filename = NULL; |
| PyObject *name = NULL; |
| int firstlineno; |
| PyObject *lnotab = NULL; |
| |
| idx = r_ref_reserve(flag, p); |
| if (idx < 0) |
| break; |
| |
| v = NULL; |
| |
| /* XXX ignore long->int overflows for now */ |
| argcount = (int)r_long(p); |
| if (PyErr_Occurred()) |
| goto code_error; |
| kwonlyargcount = (int)r_long(p); |
| if (PyErr_Occurred()) |
| goto code_error; |
| nlocals = (int)r_long(p); |
| if (PyErr_Occurred()) |
| goto code_error; |
| stacksize = (int)r_long(p); |
| if (PyErr_Occurred()) |
| goto code_error; |
| flags = (int)r_long(p); |
| if (PyErr_Occurred()) |
| goto code_error; |
| code = r_object(p); |
| if (code == NULL) |
| goto code_error; |
| consts = r_object(p); |
| if (consts == NULL) |
| goto code_error; |
| names = r_object(p); |
| if (names == NULL) |
| goto code_error; |
| varnames = r_object(p); |
| if (varnames == NULL) |
| goto code_error; |
| freevars = r_object(p); |
| if (freevars == NULL) |
| goto code_error; |
| cellvars = r_object(p); |
| if (cellvars == NULL) |
| goto code_error; |
| filename = r_object(p); |
| if (filename == NULL) |
| goto code_error; |
| if (PyUnicode_CheckExact(filename)) { |
| if (p->current_filename != NULL) { |
| if (!PyUnicode_Compare(filename, p->current_filename)) { |
| Py_DECREF(filename); |
| Py_INCREF(p->current_filename); |
| filename = p->current_filename; |
| } |
| } |
| else { |
| p->current_filename = filename; |
| } |
| } |
| name = r_object(p); |
| if (name == NULL) |
| goto code_error; |
| firstlineno = (int)r_long(p); |
| if (firstlineno == -1 && PyErr_Occurred()) |
| break; |
| lnotab = r_object(p); |
| if (lnotab == NULL) |
| goto code_error; |
| |
| v = (PyObject *) PyCode_New( |
| argcount, kwonlyargcount, |
| nlocals, stacksize, flags, |
| code, consts, names, varnames, |
| freevars, cellvars, filename, name, |
| firstlineno, lnotab); |
| v = r_ref_insert(v, idx, flag, p); |
| |
| code_error: |
| Py_XDECREF(code); |
| Py_XDECREF(consts); |
| Py_XDECREF(names); |
| Py_XDECREF(varnames); |
| Py_XDECREF(freevars); |
| Py_XDECREF(cellvars); |
| Py_XDECREF(filename); |
| Py_XDECREF(name); |
| Py_XDECREF(lnotab); |
| } |
| retval = v; |
| break; |
| |
| case TYPE_REF: |
| n = r_long(p); |
| if (n < 0 || n >= PyList_GET_SIZE(p->refs)) { |
| if (n == -1 && PyErr_Occurred()) |
| break; |
| PyErr_SetString(PyExc_ValueError, "bad marshal data (invalid reference)"); |
| break; |
| } |
| v = PyList_GET_ITEM(p->refs, n); |
| if (v == Py_None) { |
| PyErr_SetString(PyExc_ValueError, "bad marshal data (invalid reference)"); |
| break; |
| } |
| Py_INCREF(v); |
| retval = v; |
| break; |
| |
| default: |
| /* Bogus data got written, which isn't ideal. |
| This will let you keep working and recover. */ |
| PyErr_SetString(PyExc_ValueError, "bad marshal data (unknown type code)"); |
| break; |
| |
| } |
| p->depth--; |
| return retval; |
| } |
| |
| static PyObject * |
| read_object(RFILE *p) |
| { |
| PyObject *v; |
| if (PyErr_Occurred()) { |
| fprintf(stderr, "XXX readobject called with exception set\n"); |
| return NULL; |
| } |
| v = r_object(p); |
| if (v == NULL && !PyErr_Occurred()) |
| PyErr_SetString(PyExc_TypeError, "NULL object in marshal data for object"); |
| return v; |
| } |
| |
| int |
| PyMarshal_ReadShortFromFile(FILE *fp) |
| { |
| RFILE rf; |
| int res; |
| assert(fp); |
| rf.readable = NULL; |
| rf.fp = fp; |
| rf.current_filename = NULL; |
| rf.end = rf.ptr = NULL; |
| rf.buf = NULL; |
| res = r_short(&rf); |
| if (rf.buf != NULL) |
| PyMem_FREE(rf.buf); |
| return res; |
| } |
| |
| long |
| PyMarshal_ReadLongFromFile(FILE *fp) |
| { |
| RFILE rf; |
| long res; |
| rf.fp = fp; |
| rf.readable = NULL; |
| rf.current_filename = NULL; |
| rf.ptr = rf.end = NULL; |
| rf.buf = NULL; |
| res = r_long(&rf); |
| if (rf.buf != NULL) |
| PyMem_FREE(rf.buf); |
| return res; |
| } |
| |
| #ifdef HAVE_FSTAT |
| /* Return size of file in bytes; < 0 if unknown. */ |
| static off_t |
| getfilesize(FILE *fp) |
| { |
| struct stat st; |
| if (fstat(fileno(fp), &st) != 0) |
| return -1; |
| else |
| return st.st_size; |
| } |
| #endif |
| |
| /* If we can get the size of the file up-front, and it's reasonably small, |
| * read it in one gulp and delegate to ...FromString() instead. Much quicker |
| * than reading a byte at a time from file; speeds .pyc imports. |
| * CAUTION: since this may read the entire remainder of the file, don't |
| * call it unless you know you're done with the file. |
| */ |
| PyObject * |
| PyMarshal_ReadLastObjectFromFile(FILE *fp) |
| { |
| /* REASONABLE_FILE_LIMIT is by defn something big enough for Tkinter.pyc. */ |
| #define REASONABLE_FILE_LIMIT (1L << 18) |
| #ifdef HAVE_FSTAT |
| off_t filesize; |
| filesize = getfilesize(fp); |
| if (filesize > 0 && filesize <= REASONABLE_FILE_LIMIT) { |
| char* pBuf = (char *)PyMem_MALLOC(filesize); |
| if (pBuf != NULL) { |
| size_t n = fread(pBuf, 1, (size_t)filesize, fp); |
| PyObject* v = PyMarshal_ReadObjectFromString(pBuf, n); |
| PyMem_FREE(pBuf); |
| return v; |
| } |
| |
| } |
| #endif |
| /* We don't have fstat, or we do but the file is larger than |
| * REASONABLE_FILE_LIMIT or malloc failed -- read a byte at a time. |
| */ |
| return PyMarshal_ReadObjectFromFile(fp); |
| |
| #undef REASONABLE_FILE_LIMIT |
| } |
| |
| PyObject * |
| PyMarshal_ReadObjectFromFile(FILE *fp) |
| { |
| RFILE rf; |
| PyObject *result; |
| rf.fp = fp; |
| rf.readable = NULL; |
| rf.current_filename = NULL; |
| rf.depth = 0; |
| rf.ptr = rf.end = NULL; |
| rf.buf = NULL; |
| rf.refs = PyList_New(0); |
| if (rf.refs == NULL) |
| return NULL; |
| result = r_object(&rf); |
| Py_DECREF(rf.refs); |
| if (rf.buf != NULL) |
| PyMem_FREE(rf.buf); |
| return result; |
| } |
| |
| PyObject * |
| PyMarshal_ReadObjectFromString(const char *str, Py_ssize_t len) |
| { |
| RFILE rf; |
| PyObject *result; |
| rf.fp = NULL; |
| rf.readable = NULL; |
| rf.current_filename = NULL; |
| rf.ptr = (char *)str; |
| rf.end = (char *)str + len; |
| rf.buf = NULL; |
| rf.depth = 0; |
| rf.refs = PyList_New(0); |
| if (rf.refs == NULL) |
| return NULL; |
| result = r_object(&rf); |
| Py_DECREF(rf.refs); |
| if (rf.buf != NULL) |
| PyMem_FREE(rf.buf); |
| return result; |
| } |
| |
| PyObject * |
| PyMarshal_WriteObjectToString(PyObject *x, int version) |
| { |
| WFILE wf; |
| |
| wf.fp = NULL; |
| wf.readable = NULL; |
| wf.str = PyBytes_FromStringAndSize((char *)NULL, 50); |
| if (wf.str == NULL) |
| return NULL; |
| wf.ptr = PyBytes_AS_STRING((PyBytesObject *)wf.str); |
| wf.end = wf.ptr + PyBytes_Size(wf.str); |
| wf.error = WFERR_OK; |
| wf.depth = 0; |
| wf.version = version; |
| if (version >= 3) { |
| if ((wf.refs = PyDict_New()) == NULL) |
| return NULL; |
| } else |
| wf.refs = NULL; |
| w_object(x, &wf); |
| Py_XDECREF(wf.refs); |
| if (wf.str != NULL) { |
| char *base = PyBytes_AS_STRING((PyBytesObject *)wf.str); |
| if (wf.ptr - base > PY_SSIZE_T_MAX) { |
| Py_DECREF(wf.str); |
| PyErr_SetString(PyExc_OverflowError, |
| "too much marshal data for a string"); |
| return NULL; |
| } |
| if (_PyBytes_Resize(&wf.str, (Py_ssize_t)(wf.ptr - base)) < 0) |
| return NULL; |
| } |
| if (wf.error != WFERR_OK) { |
| Py_XDECREF(wf.str); |
| if (wf.error == WFERR_NOMEMORY) |
| PyErr_NoMemory(); |
| else |
| PyErr_SetString(PyExc_ValueError, |
| (wf.error==WFERR_UNMARSHALLABLE)?"unmarshallable object" |
| :"object too deeply nested to marshal"); |
| return NULL; |
| } |
| return wf.str; |
| } |
| |
| /* And an interface for Python programs... */ |
| |
| static PyObject * |
| marshal_dump(PyObject *self, PyObject *args) |
| { |
| /* XXX Quick hack -- need to do this differently */ |
| PyObject *x; |
| PyObject *f; |
| int version = Py_MARSHAL_VERSION; |
| PyObject *s; |
| PyObject *res; |
| _Py_IDENTIFIER(write); |
| |
| if (!PyArg_ParseTuple(args, "OO|i:dump", &x, &f, &version)) |
| return NULL; |
| s = PyMarshal_WriteObjectToString(x, version); |
| if (s == NULL) |
| return NULL; |
| res = _PyObject_CallMethodId(f, &PyId_write, "O", s); |
| Py_DECREF(s); |
| return res; |
| } |
| |
| PyDoc_STRVAR(dump_doc, |
| "dump(value, file[, version])\n\ |
| \n\ |
| Write the value on the open file. The value must be a supported type.\n\ |
| The file must be an open file object such as sys.stdout or returned by\n\ |
| open() or os.popen(). It must be opened in binary mode ('wb' or 'w+b').\n\ |
| \n\ |
| If the value has (or contains an object that has) an unsupported type, a\n\ |
| ValueError exception is raised — but garbage data will also be written\n\ |
| to the file. The object will not be properly read back by load()\n\ |
| \n\ |
| The version argument indicates the data format that dump should use."); |
| |
| static PyObject * |
| marshal_load(PyObject *self, PyObject *f) |
| { |
| PyObject *data, *result; |
| _Py_IDENTIFIER(read); |
| RFILE rf; |
| |
| /* |
| * Make a call to the read method, but read zero bytes. |
| * This is to ensure that the object passed in at least |
| * has a read method which returns bytes. |
| * This can be removed if we guarantee good error handling |
| * for r_string() |
| */ |
| data = _PyObject_CallMethodId(f, &PyId_read, "i", 0); |
| if (data == NULL) |
| return NULL; |
| if (!PyBytes_Check(data)) { |
| PyErr_Format(PyExc_TypeError, |
| "f.read() returned not bytes but %.100s", |
| data->ob_type->tp_name); |
| result = NULL; |
| } |
| else { |
| rf.depth = 0; |
| rf.fp = NULL; |
| rf.readable = f; |
| rf.current_filename = NULL; |
| rf.ptr = rf.end = NULL; |
| rf.buf = NULL; |
| if ((rf.refs = PyList_New(0)) != NULL) { |
| result = read_object(&rf); |
| Py_DECREF(rf.refs); |
| if (rf.buf != NULL) |
| PyMem_FREE(rf.buf); |
| } else |
| result = NULL; |
| } |
| Py_DECREF(data); |
| return result; |
| } |
| |
| PyDoc_STRVAR(load_doc, |
| "load(file)\n\ |
| \n\ |
| Read one value from the open file and return it. If no valid value is\n\ |
| read (e.g. because the data has a different Python version’s\n\ |
| incompatible marshal format), raise EOFError, ValueError or TypeError.\n\ |
| The file must be an open file object opened in binary mode ('rb' or\n\ |
| 'r+b').\n\ |
| \n\ |
| Note: If an object containing an unsupported type was marshalled with\n\ |
| dump(), load() will substitute None for the unmarshallable type."); |
| |
| |
| static PyObject * |
| marshal_dumps(PyObject *self, PyObject *args) |
| { |
| PyObject *x; |
| int version = Py_MARSHAL_VERSION; |
| if (!PyArg_ParseTuple(args, "O|i:dumps", &x, &version)) |
| return NULL; |
| return PyMarshal_WriteObjectToString(x, version); |
| } |
| |
| PyDoc_STRVAR(dumps_doc, |
| "dumps(value[, version])\n\ |
| \n\ |
| Return the string that would be written to a file by dump(value, file).\n\ |
| The value must be a supported type. Raise a ValueError exception if\n\ |
| value has (or contains an object that has) an unsupported type.\n\ |
| \n\ |
| The version argument indicates the data format that dumps should use."); |
| |
| |
| static PyObject * |
| marshal_loads(PyObject *self, PyObject *args) |
| { |
| RFILE rf; |
| Py_buffer p; |
| char *s; |
| Py_ssize_t n; |
| PyObject* result; |
| if (!PyArg_ParseTuple(args, "y*:loads", &p)) |
| return NULL; |
| s = p.buf; |
| n = p.len; |
| rf.fp = NULL; |
| rf.readable = NULL; |
| rf.current_filename = NULL; |
| rf.ptr = s; |
| rf.end = s + n; |
| rf.depth = 0; |
| if ((rf.refs = PyList_New(0)) == NULL) |
| return NULL; |
| result = read_object(&rf); |
| PyBuffer_Release(&p); |
| Py_DECREF(rf.refs); |
| return result; |
| } |
| |
| PyDoc_STRVAR(loads_doc, |
| "loads(bytes)\n\ |
| \n\ |
| Convert the bytes object to a value. If no valid value is found, raise\n\ |
| EOFError, ValueError or TypeError. Extra characters in the input are\n\ |
| ignored."); |
| |
| static PyMethodDef marshal_methods[] = { |
| {"dump", marshal_dump, METH_VARARGS, dump_doc}, |
| {"load", marshal_load, METH_O, load_doc}, |
| {"dumps", marshal_dumps, METH_VARARGS, dumps_doc}, |
| {"loads", marshal_loads, METH_VARARGS, loads_doc}, |
| {NULL, NULL} /* sentinel */ |
| }; |
| |
| |
| PyDoc_STRVAR(module_doc, |
| "This module contains functions that can read and write Python values in\n\ |
| a binary format. The format is specific to Python, but independent of\n\ |
| machine architecture issues.\n\ |
| \n\ |
| Not all Python object types are supported; in general, only objects\n\ |
| whose value is independent from a particular invocation of Python can be\n\ |
| written and read by this module. The following types are supported:\n\ |
| None, integers, floating point numbers, strings, bytes, bytearrays,\n\ |
| tuples, lists, sets, dictionaries, and code objects, where it\n\ |
| should be understood that tuples, lists and dictionaries are only\n\ |
| supported as long as the values contained therein are themselves\n\ |
| supported; and recursive lists and dictionaries should not be written\n\ |
| (they will cause infinite loops).\n\ |
| \n\ |
| Variables:\n\ |
| \n\ |
| version -- indicates the format that the module uses. Version 0 is the\n\ |
| historical format, version 1 shares interned strings and version 2\n\ |
| uses a binary format for floating point numbers.\n\ |
| Version 3 shares common object references (New in version 3.4).\n\ |
| \n\ |
| Functions:\n\ |
| \n\ |
| dump() -- write value to a file\n\ |
| load() -- read value from a file\n\ |
| dumps() -- write value to a string\n\ |
| loads() -- read value from a string"); |
| |
| |
| |
| static struct PyModuleDef marshalmodule = { |
| PyModuleDef_HEAD_INIT, |
| "marshal", |
| module_doc, |
| 0, |
| marshal_methods, |
| NULL, |
| NULL, |
| NULL, |
| NULL |
| }; |
| |
| PyMODINIT_FUNC |
| PyMarshal_Init(void) |
| { |
| PyObject *mod = PyModule_Create(&marshalmodule); |
| if (mod == NULL) |
| return NULL; |
| PyModule_AddIntConstant(mod, "version", Py_MARSHAL_VERSION); |
| return mod; |
| } |