| /* |
| * C Extension module to test Python interpreter C APIs. |
| * |
| * The 'test_*' functions exported by this module are run as part of the |
| * standard Python regression test, via Lib/test/test_capi.py. |
| */ |
| |
| #define PY_SSIZE_T_CLEAN |
| |
| #include "Python.h" |
| #include <float.h> |
| #include "structmember.h" |
| #include "datetime.h" |
| #include "marshal.h" |
| #include <signal.h> |
| |
| #ifdef MS_WINDOWS |
| # include <winsock2.h> /* struct timeval */ |
| #endif |
| |
| #ifdef HAVE_SYS_WAIT_H |
| #include <sys/wait.h> /* For W_STOPCODE */ |
| #endif |
| |
| #include "pythread.h" |
| static PyObject *TestError; /* set to exception object in init */ |
| |
| /* Raise TestError with test_name + ": " + msg, and return NULL. */ |
| |
| static PyObject * |
| raiseTestError(const char* test_name, const char* msg) |
| { |
| PyErr_Format(TestError, "%s: %s", test_name, msg); |
| return NULL; |
| } |
| |
| /* Test #defines from pyconfig.h (particularly the SIZEOF_* defines). |
| |
| The ones derived from autoconf on the UNIX-like OSes can be relied |
| upon (in the absence of sloppy cross-compiling), but the Windows |
| platforms have these hardcoded. Better safe than sorry. |
| */ |
| static PyObject* |
| sizeof_error(const char* fatname, const char* typname, |
| int expected, int got) |
| { |
| PyErr_Format(TestError, |
| "%s #define == %d but sizeof(%s) == %d", |
| fatname, expected, typname, got); |
| return (PyObject*)NULL; |
| } |
| |
| static PyObject* |
| test_config(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| #define CHECK_SIZEOF(FATNAME, TYPE) \ |
| if (FATNAME != sizeof(TYPE)) \ |
| return sizeof_error(#FATNAME, #TYPE, FATNAME, sizeof(TYPE)) |
| |
| CHECK_SIZEOF(SIZEOF_SHORT, short); |
| CHECK_SIZEOF(SIZEOF_INT, int); |
| CHECK_SIZEOF(SIZEOF_LONG, long); |
| CHECK_SIZEOF(SIZEOF_VOID_P, void*); |
| CHECK_SIZEOF(SIZEOF_TIME_T, time_t); |
| CHECK_SIZEOF(SIZEOF_LONG_LONG, long long); |
| |
| #undef CHECK_SIZEOF |
| |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject* |
| test_sizeof_c_types(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| #if defined(__GNUC__) && ((__GNUC__ > 4) || ((__GNUC__ == 4) && (__GNUC_MINOR__ > 5))) |
| #pragma GCC diagnostic push |
| #pragma GCC diagnostic ignored "-Wtype-limits" |
| #endif |
| #define CHECK_SIZEOF(TYPE, EXPECTED) \ |
| if (EXPECTED != sizeof(TYPE)) { \ |
| PyErr_Format(TestError, \ |
| "sizeof(%s) = %u instead of %u", \ |
| #TYPE, sizeof(TYPE), EXPECTED); \ |
| return (PyObject*)NULL; \ |
| } |
| #define IS_SIGNED(TYPE) (((TYPE)-1) < (TYPE)0) |
| #define CHECK_SIGNNESS(TYPE, SIGNED) \ |
| if (IS_SIGNED(TYPE) != SIGNED) { \ |
| PyErr_Format(TestError, \ |
| "%s signness is, instead of %i", \ |
| #TYPE, IS_SIGNED(TYPE), SIGNED); \ |
| return (PyObject*)NULL; \ |
| } |
| |
| /* integer types */ |
| CHECK_SIZEOF(Py_UCS1, 1); |
| CHECK_SIZEOF(Py_UCS2, 2); |
| CHECK_SIZEOF(Py_UCS4, 4); |
| CHECK_SIGNNESS(Py_UCS1, 0); |
| CHECK_SIGNNESS(Py_UCS2, 0); |
| CHECK_SIGNNESS(Py_UCS4, 0); |
| CHECK_SIZEOF(int32_t, 4); |
| CHECK_SIGNNESS(int32_t, 1); |
| CHECK_SIZEOF(uint32_t, 4); |
| CHECK_SIGNNESS(uint32_t, 0); |
| CHECK_SIZEOF(int64_t, 8); |
| CHECK_SIGNNESS(int64_t, 1); |
| CHECK_SIZEOF(uint64_t, 8); |
| CHECK_SIGNNESS(uint64_t, 0); |
| |
| /* pointer/size types */ |
| CHECK_SIZEOF(size_t, sizeof(void *)); |
| CHECK_SIGNNESS(size_t, 0); |
| CHECK_SIZEOF(Py_ssize_t, sizeof(void *)); |
| CHECK_SIGNNESS(Py_ssize_t, 1); |
| |
| CHECK_SIZEOF(uintptr_t, sizeof(void *)); |
| CHECK_SIGNNESS(uintptr_t, 0); |
| CHECK_SIZEOF(intptr_t, sizeof(void *)); |
| CHECK_SIGNNESS(intptr_t, 1); |
| |
| Py_RETURN_NONE; |
| |
| #undef IS_SIGNED |
| #undef CHECK_SIGNESS |
| #undef CHECK_SIZEOF |
| #if defined(__GNUC__) && ((__GNUC__ > 4) || ((__GNUC__ == 4) && (__GNUC_MINOR__ > 5))) |
| #pragma GCC diagnostic pop |
| #endif |
| } |
| |
| |
| static PyObject* |
| test_list_api(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| PyObject* list; |
| int i; |
| |
| /* SF bug 132008: PyList_Reverse segfaults */ |
| #define NLIST 30 |
| list = PyList_New(NLIST); |
| if (list == (PyObject*)NULL) |
| return (PyObject*)NULL; |
| /* list = range(NLIST) */ |
| for (i = 0; i < NLIST; ++i) { |
| PyObject* anint = PyLong_FromLong(i); |
| if (anint == (PyObject*)NULL) { |
| Py_DECREF(list); |
| return (PyObject*)NULL; |
| } |
| PyList_SET_ITEM(list, i, anint); |
| } |
| /* list.reverse(), via PyList_Reverse() */ |
| i = PyList_Reverse(list); /* should not blow up! */ |
| if (i != 0) { |
| Py_DECREF(list); |
| return (PyObject*)NULL; |
| } |
| /* Check that list == range(29, -1, -1) now */ |
| for (i = 0; i < NLIST; ++i) { |
| PyObject* anint = PyList_GET_ITEM(list, i); |
| if (PyLong_AS_LONG(anint) != NLIST-1-i) { |
| PyErr_SetString(TestError, |
| "test_list_api: reverse screwed up"); |
| Py_DECREF(list); |
| return (PyObject*)NULL; |
| } |
| } |
| Py_DECREF(list); |
| #undef NLIST |
| |
| Py_RETURN_NONE; |
| } |
| |
| static int |
| test_dict_inner(int count) |
| { |
| Py_ssize_t pos = 0, iterations = 0; |
| int i; |
| PyObject *dict = PyDict_New(); |
| PyObject *v, *k; |
| |
| if (dict == NULL) |
| return -1; |
| |
| for (i = 0; i < count; i++) { |
| v = PyLong_FromLong(i); |
| if (v == NULL) { |
| return -1; |
| } |
| if (PyDict_SetItem(dict, v, v) < 0) { |
| Py_DECREF(v); |
| return -1; |
| } |
| Py_DECREF(v); |
| } |
| |
| while (PyDict_Next(dict, &pos, &k, &v)) { |
| PyObject *o; |
| iterations++; |
| |
| i = PyLong_AS_LONG(v) + 1; |
| o = PyLong_FromLong(i); |
| if (o == NULL) |
| return -1; |
| if (PyDict_SetItem(dict, k, o) < 0) { |
| Py_DECREF(o); |
| return -1; |
| } |
| Py_DECREF(o); |
| } |
| |
| Py_DECREF(dict); |
| |
| if (iterations != count) { |
| PyErr_SetString( |
| TestError, |
| "test_dict_iteration: dict iteration went wrong "); |
| return -1; |
| } else { |
| return 0; |
| } |
| } |
| |
| static PyObject* |
| test_dict_iteration(PyObject* self, PyObject *Py_UNUSED(ignored)) |
| { |
| int i; |
| |
| for (i = 0; i < 200; i++) { |
| if (test_dict_inner(i) < 0) { |
| return NULL; |
| } |
| } |
| |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject* |
| dict_getitem_knownhash(PyObject *self, PyObject *args) |
| { |
| PyObject *mp, *key, *result; |
| Py_ssize_t hash; |
| |
| if (!PyArg_ParseTuple(args, "OOn:dict_getitem_knownhash", |
| &mp, &key, &hash)) { |
| return NULL; |
| } |
| |
| result = _PyDict_GetItem_KnownHash(mp, key, (Py_hash_t)hash); |
| if (result == NULL && !PyErr_Occurred()) { |
| _PyErr_SetKeyError(key); |
| return NULL; |
| } |
| |
| Py_XINCREF(result); |
| return result; |
| } |
| |
| static PyObject* |
| dict_hassplittable(PyObject *self, PyObject *arg) |
| { |
| if (!PyDict_Check(arg)) { |
| PyErr_Format(PyExc_TypeError, |
| "dict_hassplittable() argument must be dict, not '%s'", |
| arg->ob_type->tp_name); |
| return NULL; |
| } |
| |
| return PyBool_FromLong(_PyDict_HasSplitTable((PyDictObject*)arg)); |
| } |
| |
| /* Issue #4701: Check that PyObject_Hash implicitly calls |
| * PyType_Ready if it hasn't already been called |
| */ |
| static PyTypeObject _HashInheritanceTester_Type = { |
| PyVarObject_HEAD_INIT(NULL, 0) |
| "hashinheritancetester", /* Name of this type */ |
| sizeof(PyObject), /* Basic object size */ |
| 0, /* Item size for varobject */ |
| (destructor)PyObject_Del, /* tp_dealloc */ |
| 0, /* tp_print */ |
| 0, /* tp_getattr */ |
| 0, /* tp_setattr */ |
| 0, /* tp_reserved */ |
| 0, /* tp_repr */ |
| 0, /* tp_as_number */ |
| 0, /* tp_as_sequence */ |
| 0, /* tp_as_mapping */ |
| 0, /* tp_hash */ |
| 0, /* tp_call */ |
| 0, /* tp_str */ |
| PyObject_GenericGetAttr, /* tp_getattro */ |
| 0, /* tp_setattro */ |
| 0, /* tp_as_buffer */ |
| Py_TPFLAGS_DEFAULT, /* tp_flags */ |
| 0, /* tp_doc */ |
| 0, /* tp_traverse */ |
| 0, /* tp_clear */ |
| 0, /* tp_richcompare */ |
| 0, /* tp_weaklistoffset */ |
| 0, /* tp_iter */ |
| 0, /* tp_iternext */ |
| 0, /* tp_methods */ |
| 0, /* tp_members */ |
| 0, /* tp_getset */ |
| 0, /* tp_base */ |
| 0, /* tp_dict */ |
| 0, /* tp_descr_get */ |
| 0, /* tp_descr_set */ |
| 0, /* tp_dictoffset */ |
| 0, /* tp_init */ |
| 0, /* tp_alloc */ |
| PyType_GenericNew, /* tp_new */ |
| }; |
| |
| static PyObject* |
| test_lazy_hash_inheritance(PyObject* self, PyObject *Py_UNUSED(ignored)) |
| { |
| PyTypeObject *type; |
| PyObject *obj; |
| Py_hash_t hash; |
| |
| type = &_HashInheritanceTester_Type; |
| |
| if (type->tp_dict != NULL) |
| /* The type has already been initialized. This probably means |
| -R is being used. */ |
| Py_RETURN_NONE; |
| |
| |
| obj = PyObject_New(PyObject, type); |
| if (obj == NULL) { |
| PyErr_Clear(); |
| PyErr_SetString( |
| TestError, |
| "test_lazy_hash_inheritance: failed to create object"); |
| return NULL; |
| } |
| |
| if (type->tp_dict != NULL) { |
| PyErr_SetString( |
| TestError, |
| "test_lazy_hash_inheritance: type initialised too soon"); |
| Py_DECREF(obj); |
| return NULL; |
| } |
| |
| hash = PyObject_Hash(obj); |
| if ((hash == -1) && PyErr_Occurred()) { |
| PyErr_Clear(); |
| PyErr_SetString( |
| TestError, |
| "test_lazy_hash_inheritance: could not hash object"); |
| Py_DECREF(obj); |
| return NULL; |
| } |
| |
| if (type->tp_dict == NULL) { |
| PyErr_SetString( |
| TestError, |
| "test_lazy_hash_inheritance: type not initialised by hash()"); |
| Py_DECREF(obj); |
| return NULL; |
| } |
| |
| if (type->tp_hash != PyType_Type.tp_hash) { |
| PyErr_SetString( |
| TestError, |
| "test_lazy_hash_inheritance: unexpected hash function"); |
| Py_DECREF(obj); |
| return NULL; |
| } |
| |
| Py_DECREF(obj); |
| |
| Py_RETURN_NONE; |
| } |
| |
| |
| /* Tests of PyLong_{As, From}{Unsigned,}Long(), and |
| PyLong_{As, From}{Unsigned,}LongLong(). |
| |
| Note that the meat of the test is contained in testcapi_long.h. |
| This is revolting, but delicate code duplication is worse: "almost |
| exactly the same" code is needed to test long long, but the ubiquitous |
| dependence on type names makes it impossible to use a parameterized |
| function. A giant macro would be even worse than this. A C++ template |
| would be perfect. |
| |
| The "report an error" functions are deliberately not part of the #include |
| file: if the test fails, you can set a breakpoint in the appropriate |
| error function directly, and crawl back from there in the debugger. |
| */ |
| |
| #define UNBIND(X) Py_DECREF(X); (X) = NULL |
| |
| static PyObject * |
| raise_test_long_error(const char* msg) |
| { |
| return raiseTestError("test_long_api", msg); |
| } |
| |
| #define TESTNAME test_long_api_inner |
| #define TYPENAME long |
| #define F_S_TO_PY PyLong_FromLong |
| #define F_PY_TO_S PyLong_AsLong |
| #define F_U_TO_PY PyLong_FromUnsignedLong |
| #define F_PY_TO_U PyLong_AsUnsignedLong |
| |
| #include "testcapi_long.h" |
| |
| static PyObject * |
| test_long_api(PyObject* self, PyObject *Py_UNUSED(ignored)) |
| { |
| return TESTNAME(raise_test_long_error); |
| } |
| |
| #undef TESTNAME |
| #undef TYPENAME |
| #undef F_S_TO_PY |
| #undef F_PY_TO_S |
| #undef F_U_TO_PY |
| #undef F_PY_TO_U |
| |
| static PyObject * |
| raise_test_longlong_error(const char* msg) |
| { |
| return raiseTestError("test_longlong_api", msg); |
| } |
| |
| #define TESTNAME test_longlong_api_inner |
| #define TYPENAME long long |
| #define F_S_TO_PY PyLong_FromLongLong |
| #define F_PY_TO_S PyLong_AsLongLong |
| #define F_U_TO_PY PyLong_FromUnsignedLongLong |
| #define F_PY_TO_U PyLong_AsUnsignedLongLong |
| |
| #include "testcapi_long.h" |
| |
| static PyObject * |
| test_longlong_api(PyObject* self, PyObject *args) |
| { |
| return TESTNAME(raise_test_longlong_error); |
| } |
| |
| #undef TESTNAME |
| #undef TYPENAME |
| #undef F_S_TO_PY |
| #undef F_PY_TO_S |
| #undef F_U_TO_PY |
| #undef F_PY_TO_U |
| |
| /* Test the PyLong_AsLongAndOverflow API. General conversion to PY_LONG |
| is tested by test_long_api_inner. This test will concentrate on proper |
| handling of overflow. |
| */ |
| |
| static PyObject * |
| test_long_and_overflow(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| PyObject *num, *one, *temp; |
| long value; |
| int overflow; |
| |
| /* Test that overflow is set properly for a large value. */ |
| /* num is a number larger than LONG_MAX even on 64-bit platforms */ |
| num = PyLong_FromString("FFFFFFFFFFFFFFFFFFFFFFFF", NULL, 16); |
| if (num == NULL) |
| return NULL; |
| overflow = 1234; |
| value = PyLong_AsLongAndOverflow(num, &overflow); |
| Py_DECREF(num); |
| if (value == -1 && PyErr_Occurred()) |
| return NULL; |
| if (value != -1) |
| return raiseTestError("test_long_and_overflow", |
| "return value was not set to -1"); |
| if (overflow != 1) |
| return raiseTestError("test_long_and_overflow", |
| "overflow was not set to 1"); |
| |
| /* Same again, with num = LONG_MAX + 1 */ |
| num = PyLong_FromLong(LONG_MAX); |
| if (num == NULL) |
| return NULL; |
| one = PyLong_FromLong(1L); |
| if (one == NULL) { |
| Py_DECREF(num); |
| return NULL; |
| } |
| temp = PyNumber_Add(num, one); |
| Py_DECREF(one); |
| Py_DECREF(num); |
| num = temp; |
| if (num == NULL) |
| return NULL; |
| overflow = 0; |
| value = PyLong_AsLongAndOverflow(num, &overflow); |
| Py_DECREF(num); |
| if (value == -1 && PyErr_Occurred()) |
| return NULL; |
| if (value != -1) |
| return raiseTestError("test_long_and_overflow", |
| "return value was not set to -1"); |
| if (overflow != 1) |
| return raiseTestError("test_long_and_overflow", |
| "overflow was not set to 1"); |
| |
| /* Test that overflow is set properly for a large negative value. */ |
| /* num is a number smaller than LONG_MIN even on 64-bit platforms */ |
| num = PyLong_FromString("-FFFFFFFFFFFFFFFFFFFFFFFF", NULL, 16); |
| if (num == NULL) |
| return NULL; |
| overflow = 1234; |
| value = PyLong_AsLongAndOverflow(num, &overflow); |
| Py_DECREF(num); |
| if (value == -1 && PyErr_Occurred()) |
| return NULL; |
| if (value != -1) |
| return raiseTestError("test_long_and_overflow", |
| "return value was not set to -1"); |
| if (overflow != -1) |
| return raiseTestError("test_long_and_overflow", |
| "overflow was not set to -1"); |
| |
| /* Same again, with num = LONG_MIN - 1 */ |
| num = PyLong_FromLong(LONG_MIN); |
| if (num == NULL) |
| return NULL; |
| one = PyLong_FromLong(1L); |
| if (one == NULL) { |
| Py_DECREF(num); |
| return NULL; |
| } |
| temp = PyNumber_Subtract(num, one); |
| Py_DECREF(one); |
| Py_DECREF(num); |
| num = temp; |
| if (num == NULL) |
| return NULL; |
| overflow = 0; |
| value = PyLong_AsLongAndOverflow(num, &overflow); |
| Py_DECREF(num); |
| if (value == -1 && PyErr_Occurred()) |
| return NULL; |
| if (value != -1) |
| return raiseTestError("test_long_and_overflow", |
| "return value was not set to -1"); |
| if (overflow != -1) |
| return raiseTestError("test_long_and_overflow", |
| "overflow was not set to -1"); |
| |
| /* Test that overflow is cleared properly for small values. */ |
| num = PyLong_FromString("FF", NULL, 16); |
| if (num == NULL) |
| return NULL; |
| overflow = 1234; |
| value = PyLong_AsLongAndOverflow(num, &overflow); |
| Py_DECREF(num); |
| if (value == -1 && PyErr_Occurred()) |
| return NULL; |
| if (value != 0xFF) |
| return raiseTestError("test_long_and_overflow", |
| "expected return value 0xFF"); |
| if (overflow != 0) |
| return raiseTestError("test_long_and_overflow", |
| "overflow was not cleared"); |
| |
| num = PyLong_FromString("-FF", NULL, 16); |
| if (num == NULL) |
| return NULL; |
| overflow = 0; |
| value = PyLong_AsLongAndOverflow(num, &overflow); |
| Py_DECREF(num); |
| if (value == -1 && PyErr_Occurred()) |
| return NULL; |
| if (value != -0xFF) |
| return raiseTestError("test_long_and_overflow", |
| "expected return value 0xFF"); |
| if (overflow != 0) |
| return raiseTestError("test_long_and_overflow", |
| "overflow was set incorrectly"); |
| |
| num = PyLong_FromLong(LONG_MAX); |
| if (num == NULL) |
| return NULL; |
| overflow = 1234; |
| value = PyLong_AsLongAndOverflow(num, &overflow); |
| Py_DECREF(num); |
| if (value == -1 && PyErr_Occurred()) |
| return NULL; |
| if (value != LONG_MAX) |
| return raiseTestError("test_long_and_overflow", |
| "expected return value LONG_MAX"); |
| if (overflow != 0) |
| return raiseTestError("test_long_and_overflow", |
| "overflow was not cleared"); |
| |
| num = PyLong_FromLong(LONG_MIN); |
| if (num == NULL) |
| return NULL; |
| overflow = 0; |
| value = PyLong_AsLongAndOverflow(num, &overflow); |
| Py_DECREF(num); |
| if (value == -1 && PyErr_Occurred()) |
| return NULL; |
| if (value != LONG_MIN) |
| return raiseTestError("test_long_and_overflow", |
| "expected return value LONG_MIN"); |
| if (overflow != 0) |
| return raiseTestError("test_long_and_overflow", |
| "overflow was not cleared"); |
| |
| Py_RETURN_NONE; |
| } |
| |
| /* Test the PyLong_AsLongLongAndOverflow API. General conversion to |
| long long is tested by test_long_api_inner. This test will |
| concentrate on proper handling of overflow. |
| */ |
| |
| static PyObject * |
| test_long_long_and_overflow(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| PyObject *num, *one, *temp; |
| long long value; |
| int overflow; |
| |
| /* Test that overflow is set properly for a large value. */ |
| /* num is a number larger than PY_LLONG_MAX on a typical machine. */ |
| num = PyLong_FromString("FFFFFFFFFFFFFFFFFFFFFFFF", NULL, 16); |
| if (num == NULL) |
| return NULL; |
| overflow = 1234; |
| value = PyLong_AsLongLongAndOverflow(num, &overflow); |
| Py_DECREF(num); |
| if (value == -1 && PyErr_Occurred()) |
| return NULL; |
| if (value != -1) |
| return raiseTestError("test_long_long_and_overflow", |
| "return value was not set to -1"); |
| if (overflow != 1) |
| return raiseTestError("test_long_long_and_overflow", |
| "overflow was not set to 1"); |
| |
| /* Same again, with num = PY_LLONG_MAX + 1 */ |
| num = PyLong_FromLongLong(PY_LLONG_MAX); |
| if (num == NULL) |
| return NULL; |
| one = PyLong_FromLong(1L); |
| if (one == NULL) { |
| Py_DECREF(num); |
| return NULL; |
| } |
| temp = PyNumber_Add(num, one); |
| Py_DECREF(one); |
| Py_DECREF(num); |
| num = temp; |
| if (num == NULL) |
| return NULL; |
| overflow = 0; |
| value = PyLong_AsLongLongAndOverflow(num, &overflow); |
| Py_DECREF(num); |
| if (value == -1 && PyErr_Occurred()) |
| return NULL; |
| if (value != -1) |
| return raiseTestError("test_long_long_and_overflow", |
| "return value was not set to -1"); |
| if (overflow != 1) |
| return raiseTestError("test_long_long_and_overflow", |
| "overflow was not set to 1"); |
| |
| /* Test that overflow is set properly for a large negative value. */ |
| /* num is a number smaller than PY_LLONG_MIN on a typical platform */ |
| num = PyLong_FromString("-FFFFFFFFFFFFFFFFFFFFFFFF", NULL, 16); |
| if (num == NULL) |
| return NULL; |
| overflow = 1234; |
| value = PyLong_AsLongLongAndOverflow(num, &overflow); |
| Py_DECREF(num); |
| if (value == -1 && PyErr_Occurred()) |
| return NULL; |
| if (value != -1) |
| return raiseTestError("test_long_long_and_overflow", |
| "return value was not set to -1"); |
| if (overflow != -1) |
| return raiseTestError("test_long_long_and_overflow", |
| "overflow was not set to -1"); |
| |
| /* Same again, with num = PY_LLONG_MIN - 1 */ |
| num = PyLong_FromLongLong(PY_LLONG_MIN); |
| if (num == NULL) |
| return NULL; |
| one = PyLong_FromLong(1L); |
| if (one == NULL) { |
| Py_DECREF(num); |
| return NULL; |
| } |
| temp = PyNumber_Subtract(num, one); |
| Py_DECREF(one); |
| Py_DECREF(num); |
| num = temp; |
| if (num == NULL) |
| return NULL; |
| overflow = 0; |
| value = PyLong_AsLongLongAndOverflow(num, &overflow); |
| Py_DECREF(num); |
| if (value == -1 && PyErr_Occurred()) |
| return NULL; |
| if (value != -1) |
| return raiseTestError("test_long_long_and_overflow", |
| "return value was not set to -1"); |
| if (overflow != -1) |
| return raiseTestError("test_long_long_and_overflow", |
| "overflow was not set to -1"); |
| |
| /* Test that overflow is cleared properly for small values. */ |
| num = PyLong_FromString("FF", NULL, 16); |
| if (num == NULL) |
| return NULL; |
| overflow = 1234; |
| value = PyLong_AsLongLongAndOverflow(num, &overflow); |
| Py_DECREF(num); |
| if (value == -1 && PyErr_Occurred()) |
| return NULL; |
| if (value != 0xFF) |
| return raiseTestError("test_long_long_and_overflow", |
| "expected return value 0xFF"); |
| if (overflow != 0) |
| return raiseTestError("test_long_long_and_overflow", |
| "overflow was not cleared"); |
| |
| num = PyLong_FromString("-FF", NULL, 16); |
| if (num == NULL) |
| return NULL; |
| overflow = 0; |
| value = PyLong_AsLongLongAndOverflow(num, &overflow); |
| Py_DECREF(num); |
| if (value == -1 && PyErr_Occurred()) |
| return NULL; |
| if (value != -0xFF) |
| return raiseTestError("test_long_long_and_overflow", |
| "expected return value 0xFF"); |
| if (overflow != 0) |
| return raiseTestError("test_long_long_and_overflow", |
| "overflow was set incorrectly"); |
| |
| num = PyLong_FromLongLong(PY_LLONG_MAX); |
| if (num == NULL) |
| return NULL; |
| overflow = 1234; |
| value = PyLong_AsLongLongAndOverflow(num, &overflow); |
| Py_DECREF(num); |
| if (value == -1 && PyErr_Occurred()) |
| return NULL; |
| if (value != PY_LLONG_MAX) |
| return raiseTestError("test_long_long_and_overflow", |
| "expected return value PY_LLONG_MAX"); |
| if (overflow != 0) |
| return raiseTestError("test_long_long_and_overflow", |
| "overflow was not cleared"); |
| |
| num = PyLong_FromLongLong(PY_LLONG_MIN); |
| if (num == NULL) |
| return NULL; |
| overflow = 0; |
| value = PyLong_AsLongLongAndOverflow(num, &overflow); |
| Py_DECREF(num); |
| if (value == -1 && PyErr_Occurred()) |
| return NULL; |
| if (value != PY_LLONG_MIN) |
| return raiseTestError("test_long_long_and_overflow", |
| "expected return value PY_LLONG_MIN"); |
| if (overflow != 0) |
| return raiseTestError("test_long_long_and_overflow", |
| "overflow was not cleared"); |
| |
| Py_RETURN_NONE; |
| } |
| |
| /* Test the PyLong_As{Size,Ssize}_t API. At present this just tests that |
| non-integer arguments are handled correctly. It should be extended to |
| test overflow handling. |
| */ |
| |
| static PyObject * |
| test_long_as_size_t(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| size_t out_u; |
| Py_ssize_t out_s; |
| |
| Py_INCREF(Py_None); |
| |
| out_u = PyLong_AsSize_t(Py_None); |
| if (out_u != (size_t)-1 || !PyErr_Occurred()) |
| return raiseTestError("test_long_as_size_t", |
| "PyLong_AsSize_t(None) didn't complain"); |
| if (!PyErr_ExceptionMatches(PyExc_TypeError)) |
| return raiseTestError("test_long_as_size_t", |
| "PyLong_AsSize_t(None) raised " |
| "something other than TypeError"); |
| PyErr_Clear(); |
| |
| out_s = PyLong_AsSsize_t(Py_None); |
| if (out_s != (Py_ssize_t)-1 || !PyErr_Occurred()) |
| return raiseTestError("test_long_as_size_t", |
| "PyLong_AsSsize_t(None) didn't complain"); |
| if (!PyErr_ExceptionMatches(PyExc_TypeError)) |
| return raiseTestError("test_long_as_size_t", |
| "PyLong_AsSsize_t(None) raised " |
| "something other than TypeError"); |
| PyErr_Clear(); |
| |
| /* Py_INCREF(Py_None) omitted - we already have a reference to it. */ |
| return Py_None; |
| } |
| |
| /* Test the PyLong_AsDouble API. At present this just tests that |
| non-integer arguments are handled correctly. |
| */ |
| |
| static PyObject * |
| test_long_as_double(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| double out; |
| |
| Py_INCREF(Py_None); |
| |
| out = PyLong_AsDouble(Py_None); |
| if (out != -1.0 || !PyErr_Occurred()) |
| return raiseTestError("test_long_as_double", |
| "PyLong_AsDouble(None) didn't complain"); |
| if (!PyErr_ExceptionMatches(PyExc_TypeError)) |
| return raiseTestError("test_long_as_double", |
| "PyLong_AsDouble(None) raised " |
| "something other than TypeError"); |
| PyErr_Clear(); |
| |
| /* Py_INCREF(Py_None) omitted - we already have a reference to it. */ |
| return Py_None; |
| } |
| |
| /* Test the L code for PyArg_ParseTuple. This should deliver a long long |
| for both long and int arguments. The test may leak a little memory if |
| it fails. |
| */ |
| static PyObject * |
| test_L_code(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| PyObject *tuple, *num; |
| long long value; |
| |
| tuple = PyTuple_New(1); |
| if (tuple == NULL) |
| return NULL; |
| |
| num = PyLong_FromLong(42); |
| if (num == NULL) |
| return NULL; |
| |
| PyTuple_SET_ITEM(tuple, 0, num); |
| |
| value = -1; |
| if (!PyArg_ParseTuple(tuple, "L:test_L_code", &value)) { |
| return NULL; |
| } |
| if (value != 42) |
| return raiseTestError("test_L_code", |
| "L code returned wrong value for long 42"); |
| |
| Py_DECREF(num); |
| num = PyLong_FromLong(42); |
| if (num == NULL) |
| return NULL; |
| |
| PyTuple_SET_ITEM(tuple, 0, num); |
| |
| value = -1; |
| if (!PyArg_ParseTuple(tuple, "L:test_L_code", &value)) { |
| return NULL; |
| } |
| if (value != 42) |
| return raiseTestError("test_L_code", |
| "L code returned wrong value for int 42"); |
| |
| Py_DECREF(tuple); |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject * |
| return_none(void *unused) |
| { |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject * |
| raise_error(void *unused) |
| { |
| PyErr_SetNone(PyExc_ValueError); |
| return NULL; |
| } |
| |
| static int |
| test_buildvalue_N_error(const char *fmt) |
| { |
| PyObject *arg, *res; |
| |
| arg = PyList_New(0); |
| if (arg == NULL) { |
| return -1; |
| } |
| |
| Py_INCREF(arg); |
| res = Py_BuildValue(fmt, return_none, NULL, arg); |
| if (res == NULL) { |
| return -1; |
| } |
| Py_DECREF(res); |
| if (Py_REFCNT(arg) != 1) { |
| PyErr_Format(TestError, "test_buildvalue_N: " |
| "arg was not decrefed in successful " |
| "Py_BuildValue(\"%s\")", fmt); |
| return -1; |
| } |
| |
| Py_INCREF(arg); |
| res = Py_BuildValue(fmt, raise_error, NULL, arg); |
| if (res != NULL || !PyErr_Occurred()) { |
| PyErr_Format(TestError, "test_buildvalue_N: " |
| "Py_BuildValue(\"%s\") didn't complain", fmt); |
| return -1; |
| } |
| PyErr_Clear(); |
| if (Py_REFCNT(arg) != 1) { |
| PyErr_Format(TestError, "test_buildvalue_N: " |
| "arg was not decrefed in failed " |
| "Py_BuildValue(\"%s\")", fmt); |
| return -1; |
| } |
| Py_DECREF(arg); |
| return 0; |
| } |
| |
| static PyObject * |
| test_buildvalue_N(PyObject *self, PyObject *noargs) |
| { |
| PyObject *arg, *res; |
| |
| arg = PyList_New(0); |
| if (arg == NULL) { |
| return NULL; |
| } |
| Py_INCREF(arg); |
| res = Py_BuildValue("N", arg); |
| if (res == NULL) { |
| return NULL; |
| } |
| if (res != arg) { |
| return raiseTestError("test_buildvalue_N", |
| "Py_BuildValue(\"N\") returned wrong result"); |
| } |
| if (Py_REFCNT(arg) != 2) { |
| return raiseTestError("test_buildvalue_N", |
| "arg was not decrefed in Py_BuildValue(\"N\")"); |
| } |
| Py_DECREF(res); |
| Py_DECREF(arg); |
| |
| if (test_buildvalue_N_error("O&N") < 0) |
| return NULL; |
| if (test_buildvalue_N_error("(O&N)") < 0) |
| return NULL; |
| if (test_buildvalue_N_error("[O&N]") < 0) |
| return NULL; |
| if (test_buildvalue_N_error("{O&N}") < 0) |
| return NULL; |
| if (test_buildvalue_N_error("{()O&(())N}") < 0) |
| return NULL; |
| |
| Py_RETURN_NONE; |
| } |
| |
| |
| static PyObject * |
| get_args(PyObject *self, PyObject *args) |
| { |
| if (args == NULL) { |
| args = Py_None; |
| } |
| Py_INCREF(args); |
| return args; |
| } |
| |
| static PyObject * |
| get_kwargs(PyObject *self, PyObject *args, PyObject *kwargs) |
| { |
| if (kwargs == NULL) { |
| kwargs = Py_None; |
| } |
| Py_INCREF(kwargs); |
| return kwargs; |
| } |
| |
| /* Test tuple argument processing */ |
| static PyObject * |
| getargs_tuple(PyObject *self, PyObject *args) |
| { |
| int a, b, c; |
| if (!PyArg_ParseTuple(args, "i(ii)", &a, &b, &c)) |
| return NULL; |
| return Py_BuildValue("iii", a, b, c); |
| } |
| |
| /* test PyArg_ParseTupleAndKeywords */ |
| static PyObject * |
| getargs_keywords(PyObject *self, PyObject *args, PyObject *kwargs) |
| { |
| static char *keywords[] = {"arg1","arg2","arg3","arg4","arg5", NULL}; |
| static const char fmt[] = "(ii)i|(i(ii))(iii)i"; |
| int int_args[10]={-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}; |
| |
| if (!PyArg_ParseTupleAndKeywords(args, kwargs, fmt, keywords, |
| &int_args[0], &int_args[1], &int_args[2], &int_args[3], &int_args[4], |
| &int_args[5], &int_args[6], &int_args[7], &int_args[8], &int_args[9])) |
| return NULL; |
| return Py_BuildValue("iiiiiiiiii", |
| int_args[0], int_args[1], int_args[2], int_args[3], int_args[4], |
| int_args[5], int_args[6], int_args[7], int_args[8], int_args[9]); |
| } |
| |
| /* test PyArg_ParseTupleAndKeywords keyword-only arguments */ |
| static PyObject * |
| getargs_keyword_only(PyObject *self, PyObject *args, PyObject *kwargs) |
| { |
| static char *keywords[] = {"required", "optional", "keyword_only", NULL}; |
| int required = -1; |
| int optional = -1; |
| int keyword_only = -1; |
| |
| if (!PyArg_ParseTupleAndKeywords(args, kwargs, "i|i$i", keywords, |
| &required, &optional, &keyword_only)) |
| return NULL; |
| return Py_BuildValue("iii", required, optional, keyword_only); |
| } |
| |
| /* test PyArg_ParseTupleAndKeywords positional-only arguments */ |
| static PyObject * |
| getargs_positional_only_and_keywords(PyObject *self, PyObject *args, PyObject *kwargs) |
| { |
| static char *keywords[] = {"", "", "keyword", NULL}; |
| int required = -1; |
| int optional = -1; |
| int keyword = -1; |
| |
| if (!PyArg_ParseTupleAndKeywords(args, kwargs, "i|ii", keywords, |
| &required, &optional, &keyword)) |
| return NULL; |
| return Py_BuildValue("iii", required, optional, keyword); |
| } |
| |
| /* Functions to call PyArg_ParseTuple with integer format codes, |
| and return the result. |
| */ |
| static PyObject * |
| getargs_b(PyObject *self, PyObject *args) |
| { |
| unsigned char value; |
| if (!PyArg_ParseTuple(args, "b", &value)) |
| return NULL; |
| return PyLong_FromUnsignedLong((unsigned long)value); |
| } |
| |
| static PyObject * |
| getargs_B(PyObject *self, PyObject *args) |
| { |
| unsigned char value; |
| if (!PyArg_ParseTuple(args, "B", &value)) |
| return NULL; |
| return PyLong_FromUnsignedLong((unsigned long)value); |
| } |
| |
| static PyObject * |
| getargs_h(PyObject *self, PyObject *args) |
| { |
| short value; |
| if (!PyArg_ParseTuple(args, "h", &value)) |
| return NULL; |
| return PyLong_FromLong((long)value); |
| } |
| |
| static PyObject * |
| getargs_H(PyObject *self, PyObject *args) |
| { |
| unsigned short value; |
| if (!PyArg_ParseTuple(args, "H", &value)) |
| return NULL; |
| return PyLong_FromUnsignedLong((unsigned long)value); |
| } |
| |
| static PyObject * |
| getargs_I(PyObject *self, PyObject *args) |
| { |
| unsigned int value; |
| if (!PyArg_ParseTuple(args, "I", &value)) |
| return NULL; |
| return PyLong_FromUnsignedLong((unsigned long)value); |
| } |
| |
| static PyObject * |
| getargs_k(PyObject *self, PyObject *args) |
| { |
| unsigned long value; |
| if (!PyArg_ParseTuple(args, "k", &value)) |
| return NULL; |
| return PyLong_FromUnsignedLong(value); |
| } |
| |
| static PyObject * |
| getargs_i(PyObject *self, PyObject *args) |
| { |
| int value; |
| if (!PyArg_ParseTuple(args, "i", &value)) |
| return NULL; |
| return PyLong_FromLong((long)value); |
| } |
| |
| static PyObject * |
| getargs_l(PyObject *self, PyObject *args) |
| { |
| long value; |
| if (!PyArg_ParseTuple(args, "l", &value)) |
| return NULL; |
| return PyLong_FromLong(value); |
| } |
| |
| static PyObject * |
| getargs_n(PyObject *self, PyObject *args) |
| { |
| Py_ssize_t value; |
| if (!PyArg_ParseTuple(args, "n", &value)) |
| return NULL; |
| return PyLong_FromSsize_t(value); |
| } |
| |
| static PyObject * |
| getargs_p(PyObject *self, PyObject *args) |
| { |
| int value; |
| if (!PyArg_ParseTuple(args, "p", &value)) |
| return NULL; |
| return PyLong_FromLong(value); |
| } |
| |
| static PyObject * |
| getargs_L(PyObject *self, PyObject *args) |
| { |
| long long value; |
| if (!PyArg_ParseTuple(args, "L", &value)) |
| return NULL; |
| return PyLong_FromLongLong(value); |
| } |
| |
| static PyObject * |
| getargs_K(PyObject *self, PyObject *args) |
| { |
| unsigned long long value; |
| if (!PyArg_ParseTuple(args, "K", &value)) |
| return NULL; |
| return PyLong_FromUnsignedLongLong(value); |
| } |
| |
| /* This function not only tests the 'k' getargs code, but also the |
| PyLong_AsUnsignedLongMask() function. */ |
| static PyObject * |
| test_k_code(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| PyObject *tuple, *num; |
| unsigned long value; |
| |
| tuple = PyTuple_New(1); |
| if (tuple == NULL) |
| return NULL; |
| |
| /* a number larger than ULONG_MAX even on 64-bit platforms */ |
| num = PyLong_FromString("FFFFFFFFFFFFFFFFFFFFFFFF", NULL, 16); |
| if (num == NULL) |
| return NULL; |
| |
| value = PyLong_AsUnsignedLongMask(num); |
| if (value != ULONG_MAX) |
| return raiseTestError("test_k_code", |
| "PyLong_AsUnsignedLongMask() returned wrong value for long 0xFFF...FFF"); |
| |
| PyTuple_SET_ITEM(tuple, 0, num); |
| |
| value = 0; |
| if (!PyArg_ParseTuple(tuple, "k:test_k_code", &value)) { |
| return NULL; |
| } |
| if (value != ULONG_MAX) |
| return raiseTestError("test_k_code", |
| "k code returned wrong value for long 0xFFF...FFF"); |
| |
| Py_DECREF(num); |
| num = PyLong_FromString("-FFFFFFFF000000000000000042", NULL, 16); |
| if (num == NULL) |
| return NULL; |
| |
| value = PyLong_AsUnsignedLongMask(num); |
| if (value != (unsigned long)-0x42) |
| return raiseTestError("test_k_code", |
| "PyLong_AsUnsignedLongMask() returned wrong " |
| "value for long -0xFFF..000042"); |
| |
| PyTuple_SET_ITEM(tuple, 0, num); |
| |
| value = 0; |
| if (!PyArg_ParseTuple(tuple, "k:test_k_code", &value)) { |
| return NULL; |
| } |
| if (value != (unsigned long)-0x42) |
| return raiseTestError("test_k_code", |
| "k code returned wrong value for long -0xFFF..000042"); |
| |
| Py_DECREF(tuple); |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject * |
| getargs_f(PyObject *self, PyObject *args) |
| { |
| float f; |
| if (!PyArg_ParseTuple(args, "f", &f)) |
| return NULL; |
| return PyFloat_FromDouble(f); |
| } |
| |
| static PyObject * |
| getargs_d(PyObject *self, PyObject *args) |
| { |
| double d; |
| if (!PyArg_ParseTuple(args, "d", &d)) |
| return NULL; |
| return PyFloat_FromDouble(d); |
| } |
| |
| static PyObject * |
| getargs_D(PyObject *self, PyObject *args) |
| { |
| Py_complex cval; |
| if (!PyArg_ParseTuple(args, "D", &cval)) |
| return NULL; |
| return PyComplex_FromCComplex(cval); |
| } |
| |
| static PyObject * |
| getargs_S(PyObject *self, PyObject *args) |
| { |
| PyObject *obj; |
| if (!PyArg_ParseTuple(args, "S", &obj)) |
| return NULL; |
| Py_INCREF(obj); |
| return obj; |
| } |
| |
| static PyObject * |
| getargs_Y(PyObject *self, PyObject *args) |
| { |
| PyObject *obj; |
| if (!PyArg_ParseTuple(args, "Y", &obj)) |
| return NULL; |
| Py_INCREF(obj); |
| return obj; |
| } |
| |
| static PyObject * |
| getargs_U(PyObject *self, PyObject *args) |
| { |
| PyObject *obj; |
| if (!PyArg_ParseTuple(args, "U", &obj)) |
| return NULL; |
| Py_INCREF(obj); |
| return obj; |
| } |
| |
| static PyObject * |
| getargs_c(PyObject *self, PyObject *args) |
| { |
| char c; |
| if (!PyArg_ParseTuple(args, "c", &c)) |
| return NULL; |
| return PyLong_FromLong((unsigned char)c); |
| } |
| |
| static PyObject * |
| getargs_C(PyObject *self, PyObject *args) |
| { |
| int c; |
| if (!PyArg_ParseTuple(args, "C", &c)) |
| return NULL; |
| return PyLong_FromLong(c); |
| } |
| |
| static PyObject * |
| getargs_s(PyObject *self, PyObject *args) |
| { |
| char *str; |
| if (!PyArg_ParseTuple(args, "s", &str)) |
| return NULL; |
| return PyBytes_FromString(str); |
| } |
| |
| static PyObject * |
| getargs_s_star(PyObject *self, PyObject *args) |
| { |
| Py_buffer buffer; |
| PyObject *bytes; |
| if (!PyArg_ParseTuple(args, "s*", &buffer)) |
| return NULL; |
| bytes = PyBytes_FromStringAndSize(buffer.buf, buffer.len); |
| PyBuffer_Release(&buffer); |
| return bytes; |
| } |
| |
| static PyObject * |
| getargs_s_hash(PyObject *self, PyObject *args) |
| { |
| char *str; |
| Py_ssize_t size; |
| if (!PyArg_ParseTuple(args, "s#", &str, &size)) |
| return NULL; |
| return PyBytes_FromStringAndSize(str, size); |
| } |
| |
| static PyObject * |
| getargs_z(PyObject *self, PyObject *args) |
| { |
| char *str; |
| if (!PyArg_ParseTuple(args, "z", &str)) |
| return NULL; |
| if (str != NULL) |
| return PyBytes_FromString(str); |
| else |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject * |
| getargs_z_star(PyObject *self, PyObject *args) |
| { |
| Py_buffer buffer; |
| PyObject *bytes; |
| if (!PyArg_ParseTuple(args, "z*", &buffer)) |
| return NULL; |
| if (buffer.buf != NULL) |
| bytes = PyBytes_FromStringAndSize(buffer.buf, buffer.len); |
| else { |
| Py_INCREF(Py_None); |
| bytes = Py_None; |
| } |
| PyBuffer_Release(&buffer); |
| return bytes; |
| } |
| |
| static PyObject * |
| getargs_z_hash(PyObject *self, PyObject *args) |
| { |
| char *str; |
| Py_ssize_t size; |
| if (!PyArg_ParseTuple(args, "z#", &str, &size)) |
| return NULL; |
| if (str != NULL) |
| return PyBytes_FromStringAndSize(str, size); |
| else |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject * |
| getargs_y(PyObject *self, PyObject *args) |
| { |
| char *str; |
| if (!PyArg_ParseTuple(args, "y", &str)) |
| return NULL; |
| return PyBytes_FromString(str); |
| } |
| |
| static PyObject * |
| getargs_y_star(PyObject *self, PyObject *args) |
| { |
| Py_buffer buffer; |
| PyObject *bytes; |
| if (!PyArg_ParseTuple(args, "y*", &buffer)) |
| return NULL; |
| bytes = PyBytes_FromStringAndSize(buffer.buf, buffer.len); |
| PyBuffer_Release(&buffer); |
| return bytes; |
| } |
| |
| static PyObject * |
| getargs_y_hash(PyObject *self, PyObject *args) |
| { |
| char *str; |
| Py_ssize_t size; |
| if (!PyArg_ParseTuple(args, "y#", &str, &size)) |
| return NULL; |
| return PyBytes_FromStringAndSize(str, size); |
| } |
| |
| static PyObject * |
| getargs_u(PyObject *self, PyObject *args) |
| { |
| Py_UNICODE *str; |
| if (!PyArg_ParseTuple(args, "u", &str)) |
| return NULL; |
| return PyUnicode_FromWideChar(str, -1); |
| } |
| |
| static PyObject * |
| getargs_u_hash(PyObject *self, PyObject *args) |
| { |
| Py_UNICODE *str; |
| Py_ssize_t size; |
| if (!PyArg_ParseTuple(args, "u#", &str, &size)) |
| return NULL; |
| return PyUnicode_FromWideChar(str, size); |
| } |
| |
| static PyObject * |
| getargs_Z(PyObject *self, PyObject *args) |
| { |
| Py_UNICODE *str; |
| if (!PyArg_ParseTuple(args, "Z", &str)) |
| return NULL; |
| if (str != NULL) { |
| return PyUnicode_FromWideChar(str, -1); |
| } else |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject * |
| getargs_Z_hash(PyObject *self, PyObject *args) |
| { |
| Py_UNICODE *str; |
| Py_ssize_t size; |
| if (!PyArg_ParseTuple(args, "Z#", &str, &size)) |
| return NULL; |
| if (str != NULL) |
| return PyUnicode_FromWideChar(str, size); |
| else |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject * |
| getargs_es(PyObject *self, PyObject *args) |
| { |
| PyObject *arg, *result; |
| const char *encoding = NULL; |
| char *str; |
| |
| if (!PyArg_ParseTuple(args, "O|s", &arg, &encoding)) |
| return NULL; |
| if (!PyArg_Parse(arg, "es", encoding, &str)) |
| return NULL; |
| result = PyBytes_FromString(str); |
| PyMem_Free(str); |
| return result; |
| } |
| |
| static PyObject * |
| getargs_et(PyObject *self, PyObject *args) |
| { |
| PyObject *arg, *result; |
| const char *encoding = NULL; |
| char *str; |
| |
| if (!PyArg_ParseTuple(args, "O|s", &arg, &encoding)) |
| return NULL; |
| if (!PyArg_Parse(arg, "et", encoding, &str)) |
| return NULL; |
| result = PyBytes_FromString(str); |
| PyMem_Free(str); |
| return result; |
| } |
| |
| static PyObject * |
| getargs_es_hash(PyObject *self, PyObject *args) |
| { |
| PyObject *arg, *result; |
| const char *encoding = NULL; |
| PyByteArrayObject *buffer = NULL; |
| char *str = NULL; |
| Py_ssize_t size; |
| |
| if (!PyArg_ParseTuple(args, "O|sY", &arg, &encoding, &buffer)) |
| return NULL; |
| if (buffer != NULL) { |
| str = PyByteArray_AS_STRING(buffer); |
| size = PyByteArray_GET_SIZE(buffer); |
| } |
| if (!PyArg_Parse(arg, "es#", encoding, &str, &size)) |
| return NULL; |
| result = PyBytes_FromStringAndSize(str, size); |
| if (buffer == NULL) |
| PyMem_Free(str); |
| return result; |
| } |
| |
| static PyObject * |
| getargs_et_hash(PyObject *self, PyObject *args) |
| { |
| PyObject *arg, *result; |
| const char *encoding = NULL; |
| PyByteArrayObject *buffer = NULL; |
| char *str = NULL; |
| Py_ssize_t size; |
| |
| if (!PyArg_ParseTuple(args, "O|sY", &arg, &encoding, &buffer)) |
| return NULL; |
| if (buffer != NULL) { |
| str = PyByteArray_AS_STRING(buffer); |
| size = PyByteArray_GET_SIZE(buffer); |
| } |
| if (!PyArg_Parse(arg, "et#", encoding, &str, &size)) |
| return NULL; |
| result = PyBytes_FromStringAndSize(str, size); |
| if (buffer == NULL) |
| PyMem_Free(str); |
| return result; |
| } |
| |
| /* Test the s and z codes for PyArg_ParseTuple. |
| */ |
| static PyObject * |
| test_s_code(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| /* Unicode strings should be accepted */ |
| PyObject *tuple, *obj; |
| char *value; |
| |
| tuple = PyTuple_New(1); |
| if (tuple == NULL) |
| return NULL; |
| |
| obj = PyUnicode_Decode("t\xeate", strlen("t\xeate"), |
| "latin-1", NULL); |
| if (obj == NULL) |
| return NULL; |
| |
| PyTuple_SET_ITEM(tuple, 0, obj); |
| |
| /* These two blocks used to raise a TypeError: |
| * "argument must be string without null bytes, not str" |
| */ |
| if (!PyArg_ParseTuple(tuple, "s:test_s_code1", &value)) { |
| return NULL; |
| } |
| |
| if (!PyArg_ParseTuple(tuple, "z:test_s_code2", &value)) { |
| return NULL; |
| } |
| |
| Py_DECREF(tuple); |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject * |
| parse_tuple_and_keywords(PyObject *self, PyObject *args) |
| { |
| PyObject *sub_args; |
| PyObject *sub_kwargs; |
| const char *sub_format; |
| PyObject *sub_keywords; |
| |
| Py_ssize_t i, size; |
| char *keywords[8 + 1]; /* space for NULL at end */ |
| PyObject *o; |
| PyObject *converted[8]; |
| |
| int result; |
| PyObject *return_value = NULL; |
| |
| double buffers[8][4]; /* double ensures alignment where necessary */ |
| |
| if (!PyArg_ParseTuple(args, "OOsO:parse_tuple_and_keywords", |
| &sub_args, &sub_kwargs, |
| &sub_format, &sub_keywords)) |
| return NULL; |
| |
| if (!(PyList_CheckExact(sub_keywords) || PyTuple_CheckExact(sub_keywords))) { |
| PyErr_SetString(PyExc_ValueError, |
| "parse_tuple_and_keywords: sub_keywords must be either list or tuple"); |
| return NULL; |
| } |
| |
| memset(buffers, 0, sizeof(buffers)); |
| memset(converted, 0, sizeof(converted)); |
| memset(keywords, 0, sizeof(keywords)); |
| |
| size = PySequence_Fast_GET_SIZE(sub_keywords); |
| if (size > 8) { |
| PyErr_SetString(PyExc_ValueError, |
| "parse_tuple_and_keywords: too many keywords in sub_keywords"); |
| goto exit; |
| } |
| |
| for (i = 0; i < size; i++) { |
| o = PySequence_Fast_GET_ITEM(sub_keywords, i); |
| if (!PyUnicode_FSConverter(o, (void *)(converted + i))) { |
| PyErr_Format(PyExc_ValueError, |
| "parse_tuple_and_keywords: could not convert keywords[%zd] to narrow string", i); |
| goto exit; |
| } |
| keywords[i] = PyBytes_AS_STRING(converted[i]); |
| } |
| |
| result = PyArg_ParseTupleAndKeywords(sub_args, sub_kwargs, |
| sub_format, keywords, |
| buffers + 0, buffers + 1, buffers + 2, buffers + 3, |
| buffers + 4, buffers + 5, buffers + 6, buffers + 7); |
| |
| if (result) { |
| return_value = Py_None; |
| Py_INCREF(Py_None); |
| } |
| |
| exit: |
| size = sizeof(converted) / sizeof(converted[0]); |
| for (i = 0; i < size; i++) { |
| Py_XDECREF(converted[i]); |
| } |
| return return_value; |
| } |
| |
| static volatile int x; |
| |
| /* Test the u and u# codes for PyArg_ParseTuple. May leak memory in case |
| of an error. |
| */ |
| static PyObject * |
| test_u_code(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| PyObject *tuple, *obj; |
| Py_UNICODE *value; |
| Py_ssize_t len; |
| |
| /* issue4122: Undefined reference to _Py_ascii_whitespace on Windows */ |
| /* Just use the macro and check that it compiles */ |
| x = Py_UNICODE_ISSPACE(25); |
| |
| tuple = PyTuple_New(1); |
| if (tuple == NULL) |
| return NULL; |
| |
| obj = PyUnicode_Decode("test", strlen("test"), |
| "ascii", NULL); |
| if (obj == NULL) |
| return NULL; |
| |
| PyTuple_SET_ITEM(tuple, 0, obj); |
| |
| value = 0; |
| if (!PyArg_ParseTuple(tuple, "u:test_u_code", &value)) { |
| return NULL; |
| } |
| if (value != PyUnicode_AS_UNICODE(obj)) |
| return raiseTestError("test_u_code", |
| "u code returned wrong value for u'test'"); |
| value = 0; |
| if (!PyArg_ParseTuple(tuple, "u#:test_u_code", &value, &len)) { |
| return NULL; |
| } |
| if (value != PyUnicode_AS_UNICODE(obj) || |
| len != PyUnicode_GET_SIZE(obj)) |
| return raiseTestError("test_u_code", |
| "u# code returned wrong values for u'test'"); |
| |
| Py_DECREF(tuple); |
| Py_RETURN_NONE; |
| } |
| |
| /* Test Z and Z# codes for PyArg_ParseTuple */ |
| static PyObject * |
| test_Z_code(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| PyObject *tuple, *obj; |
| const Py_UNICODE *value1, *value2; |
| Py_ssize_t len1, len2; |
| |
| tuple = PyTuple_New(2); |
| if (tuple == NULL) |
| return NULL; |
| |
| obj = PyUnicode_FromString("test"); |
| PyTuple_SET_ITEM(tuple, 0, obj); |
| Py_INCREF(Py_None); |
| PyTuple_SET_ITEM(tuple, 1, Py_None); |
| |
| /* swap values on purpose */ |
| value1 = NULL; |
| value2 = PyUnicode_AS_UNICODE(obj); |
| |
| /* Test Z for both values */ |
| if (!PyArg_ParseTuple(tuple, "ZZ:test_Z_code", &value1, &value2)) { |
| return NULL; |
| } |
| if (value1 != PyUnicode_AS_UNICODE(obj)) |
| return raiseTestError("test_Z_code", |
| "Z code returned wrong value for 'test'"); |
| if (value2 != NULL) |
| return raiseTestError("test_Z_code", |
| "Z code returned wrong value for None"); |
| |
| value1 = NULL; |
| value2 = PyUnicode_AS_UNICODE(obj); |
| len1 = -1; |
| len2 = -1; |
| |
| /* Test Z# for both values */ |
| if (!PyArg_ParseTuple(tuple, "Z#Z#:test_Z_code", &value1, &len1, |
| &value2, &len2)) |
| { |
| return NULL; |
| } |
| if (value1 != PyUnicode_AS_UNICODE(obj) || |
| len1 != PyUnicode_GET_SIZE(obj)) |
| return raiseTestError("test_Z_code", |
| "Z# code returned wrong values for 'test'"); |
| if (value2 != NULL || |
| len2 != 0) |
| return raiseTestError("test_Z_code", |
| "Z# code returned wrong values for None'"); |
| |
| Py_DECREF(tuple); |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject * |
| test_widechar(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| #if defined(SIZEOF_WCHAR_T) && (SIZEOF_WCHAR_T == 4) |
| const wchar_t wtext[2] = {(wchar_t)0x10ABCDu}; |
| size_t wtextlen = 1; |
| const wchar_t invalid[1] = {(wchar_t)0x110000u}; |
| #else |
| const wchar_t wtext[3] = {(wchar_t)0xDBEAu, (wchar_t)0xDFCDu}; |
| size_t wtextlen = 2; |
| #endif |
| PyObject *wide, *utf8; |
| |
| wide = PyUnicode_FromWideChar(wtext, wtextlen); |
| if (wide == NULL) |
| return NULL; |
| |
| utf8 = PyUnicode_FromString("\xf4\x8a\xaf\x8d"); |
| if (utf8 == NULL) { |
| Py_DECREF(wide); |
| return NULL; |
| } |
| |
| if (PyUnicode_GET_LENGTH(wide) != PyUnicode_GET_LENGTH(utf8)) { |
| Py_DECREF(wide); |
| Py_DECREF(utf8); |
| return raiseTestError("test_widechar", |
| "wide string and utf8 string " |
| "have different length"); |
| } |
| if (PyUnicode_Compare(wide, utf8)) { |
| Py_DECREF(wide); |
| Py_DECREF(utf8); |
| if (PyErr_Occurred()) |
| return NULL; |
| return raiseTestError("test_widechar", |
| "wide string and utf8 string " |
| "are different"); |
| } |
| |
| Py_DECREF(wide); |
| Py_DECREF(utf8); |
| |
| #if defined(SIZEOF_WCHAR_T) && (SIZEOF_WCHAR_T == 4) |
| wide = PyUnicode_FromWideChar(invalid, 1); |
| if (wide == NULL) |
| PyErr_Clear(); |
| else |
| return raiseTestError("test_widechar", |
| "PyUnicode_FromWideChar(L\"\\U00110000\", 1) didn't fail"); |
| |
| wide = PyUnicode_FromUnicode(invalid, 1); |
| if (wide == NULL) |
| PyErr_Clear(); |
| else |
| return raiseTestError("test_widechar", |
| "PyUnicode_FromUnicode(L\"\\U00110000\", 1) didn't fail"); |
| |
| wide = PyUnicode_FromUnicode(NULL, 1); |
| if (wide == NULL) |
| return NULL; |
| PyUnicode_AS_UNICODE(wide)[0] = invalid[0]; |
| if (_PyUnicode_Ready(wide) < 0) { |
| Py_DECREF(wide); |
| PyErr_Clear(); |
| } |
| else { |
| Py_DECREF(wide); |
| return raiseTestError("test_widechar", |
| "PyUnicode_Ready() didn't fail"); |
| } |
| #endif |
| |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject * |
| unicode_aswidechar(PyObject *self, PyObject *args) |
| { |
| PyObject *unicode, *result; |
| Py_ssize_t buflen, size; |
| wchar_t *buffer; |
| |
| if (!PyArg_ParseTuple(args, "Un", &unicode, &buflen)) |
| return NULL; |
| buffer = PyMem_New(wchar_t, buflen); |
| if (buffer == NULL) |
| return PyErr_NoMemory(); |
| |
| size = PyUnicode_AsWideChar(unicode, buffer, buflen); |
| if (size == -1) { |
| PyMem_Free(buffer); |
| return NULL; |
| } |
| |
| if (size < buflen) |
| buflen = size + 1; |
| else |
| buflen = size; |
| result = PyUnicode_FromWideChar(buffer, buflen); |
| PyMem_Free(buffer); |
| if (result == NULL) |
| return NULL; |
| |
| return Py_BuildValue("(Nn)", result, size); |
| } |
| |
| static PyObject * |
| unicode_aswidecharstring(PyObject *self, PyObject *args) |
| { |
| PyObject *unicode, *result; |
| Py_ssize_t size; |
| wchar_t *buffer; |
| |
| if (!PyArg_ParseTuple(args, "U", &unicode)) |
| return NULL; |
| |
| buffer = PyUnicode_AsWideCharString(unicode, &size); |
| if (buffer == NULL) |
| return NULL; |
| |
| result = PyUnicode_FromWideChar(buffer, size + 1); |
| PyMem_Free(buffer); |
| if (result == NULL) |
| return NULL; |
| return Py_BuildValue("(Nn)", result, size); |
| } |
| |
| static PyObject * |
| unicode_asucs4(PyObject *self, PyObject *args) |
| { |
| PyObject *unicode, *result; |
| Py_UCS4 *buffer; |
| int copy_null; |
| Py_ssize_t str_len, buf_len; |
| |
| if (!PyArg_ParseTuple(args, "Unp:unicode_asucs4", &unicode, &str_len, ©_null)) { |
| return NULL; |
| } |
| |
| buf_len = str_len + 1; |
| buffer = PyMem_NEW(Py_UCS4, buf_len); |
| if (buffer == NULL) { |
| return PyErr_NoMemory(); |
| } |
| memset(buffer, 0, sizeof(Py_UCS4)*buf_len); |
| buffer[str_len] = 0xffffU; |
| |
| if (!PyUnicode_AsUCS4(unicode, buffer, buf_len, copy_null)) { |
| PyMem_FREE(buffer); |
| return NULL; |
| } |
| |
| result = PyUnicode_FromKindAndData(PyUnicode_4BYTE_KIND, buffer, buf_len); |
| PyMem_FREE(buffer); |
| return result; |
| } |
| |
| static PyObject * |
| unicode_findchar(PyObject *self, PyObject *args) |
| { |
| PyObject *str; |
| int direction; |
| unsigned int ch; |
| Py_ssize_t result; |
| Py_ssize_t start, end; |
| |
| if (!PyArg_ParseTuple(args, "UInni:unicode_findchar", &str, &ch, |
| &start, &end, &direction)) { |
| return NULL; |
| } |
| |
| result = PyUnicode_FindChar(str, (Py_UCS4)ch, start, end, direction); |
| if (result == -2) |
| return NULL; |
| else |
| return PyLong_FromSsize_t(result); |
| } |
| |
| static PyObject * |
| unicode_copycharacters(PyObject *self, PyObject *args) |
| { |
| PyObject *from, *to, *to_copy; |
| Py_ssize_t from_start, to_start, how_many, copied; |
| |
| if (!PyArg_ParseTuple(args, "UnOnn:unicode_copycharacters", &to, &to_start, |
| &from, &from_start, &how_many)) { |
| return NULL; |
| } |
| |
| if (!(to_copy = PyUnicode_New(PyUnicode_GET_LENGTH(to), |
| PyUnicode_MAX_CHAR_VALUE(to)))) { |
| return NULL; |
| } |
| if (PyUnicode_Fill(to_copy, 0, PyUnicode_GET_LENGTH(to_copy), 0U) < 0) { |
| Py_DECREF(to_copy); |
| return NULL; |
| } |
| |
| if ((copied = PyUnicode_CopyCharacters(to_copy, to_start, from, |
| from_start, how_many)) < 0) { |
| Py_DECREF(to_copy); |
| return NULL; |
| } |
| |
| return Py_BuildValue("(Nn)", to_copy, copied); |
| } |
| |
| static PyObject * |
| unicode_encodedecimal(PyObject *self, PyObject *args) |
| { |
| Py_UNICODE *unicode; |
| Py_ssize_t length; |
| char *errors = NULL; |
| PyObject *decimal; |
| Py_ssize_t decimal_length, new_length; |
| int res; |
| |
| if (!PyArg_ParseTuple(args, "u#|s", &unicode, &length, &errors)) |
| return NULL; |
| |
| decimal_length = length * 7; /* len('€') */ |
| decimal = PyBytes_FromStringAndSize(NULL, decimal_length); |
| if (decimal == NULL) |
| return NULL; |
| |
| res = PyUnicode_EncodeDecimal(unicode, length, |
| PyBytes_AS_STRING(decimal), |
| errors); |
| if (res < 0) { |
| Py_DECREF(decimal); |
| return NULL; |
| } |
| |
| new_length = strlen(PyBytes_AS_STRING(decimal)); |
| assert(new_length <= decimal_length); |
| res = _PyBytes_Resize(&decimal, new_length); |
| if (res < 0) |
| return NULL; |
| |
| return decimal; |
| } |
| |
| static PyObject * |
| unicode_transformdecimaltoascii(PyObject *self, PyObject *args) |
| { |
| Py_UNICODE *unicode; |
| Py_ssize_t length; |
| if (!PyArg_ParseTuple(args, "u#|s", &unicode, &length)) |
| return NULL; |
| return PyUnicode_TransformDecimalToASCII(unicode, length); |
| } |
| |
| static PyObject * |
| unicode_legacy_string(PyObject *self, PyObject *args) |
| { |
| Py_UNICODE *data; |
| Py_ssize_t len; |
| PyObject *u; |
| |
| if (!PyArg_ParseTuple(args, "u#", &data, &len)) |
| return NULL; |
| |
| u = PyUnicode_FromUnicode(NULL, len); |
| if (u == NULL) |
| return NULL; |
| |
| memcpy(PyUnicode_AS_UNICODE(u), data, len * sizeof(Py_UNICODE)); |
| |
| if (len > 0) { /* The empty string is always ready. */ |
| assert(!PyUnicode_IS_READY(u)); |
| } |
| |
| return u; |
| } |
| |
| static PyObject * |
| getargs_w_star(PyObject *self, PyObject *args) |
| { |
| Py_buffer buffer; |
| PyObject *result; |
| char *str; |
| |
| if (!PyArg_ParseTuple(args, "w*:getargs_w_star", &buffer)) |
| return NULL; |
| |
| if (2 <= buffer.len) { |
| str = buffer.buf; |
| str[0] = '['; |
| str[buffer.len-1] = ']'; |
| } |
| |
| result = PyBytes_FromStringAndSize(buffer.buf, buffer.len); |
| PyBuffer_Release(&buffer); |
| return result; |
| } |
| |
| |
| static PyObject * |
| test_empty_argparse(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| /* Test that formats can begin with '|'. See issue #4720. */ |
| PyObject *tuple, *dict = NULL; |
| static char *kwlist[] = {NULL}; |
| int result; |
| tuple = PyTuple_New(0); |
| if (!tuple) |
| return NULL; |
| if (!(result = PyArg_ParseTuple(tuple, "|:test_empty_argparse"))) { |
| goto done; |
| } |
| dict = PyDict_New(); |
| if (!dict) |
| goto done; |
| result = PyArg_ParseTupleAndKeywords(tuple, dict, "|:test_empty_argparse", kwlist); |
| done: |
| Py_DECREF(tuple); |
| Py_XDECREF(dict); |
| if (!result) { |
| return NULL; |
| } |
| else { |
| Py_RETURN_NONE; |
| } |
| } |
| |
| static PyObject * |
| codec_incrementalencoder(PyObject *self, PyObject *args) |
| { |
| const char *encoding, *errors = NULL; |
| if (!PyArg_ParseTuple(args, "s|s:test_incrementalencoder", |
| &encoding, &errors)) |
| return NULL; |
| return PyCodec_IncrementalEncoder(encoding, errors); |
| } |
| |
| static PyObject * |
| codec_incrementaldecoder(PyObject *self, PyObject *args) |
| { |
| const char *encoding, *errors = NULL; |
| if (!PyArg_ParseTuple(args, "s|s:test_incrementaldecoder", |
| &encoding, &errors)) |
| return NULL; |
| return PyCodec_IncrementalDecoder(encoding, errors); |
| } |
| |
| |
| /* Simple test of _PyLong_NumBits and _PyLong_Sign. */ |
| static PyObject * |
| test_long_numbits(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| struct triple { |
| long input; |
| size_t nbits; |
| int sign; |
| } testcases[] = {{0, 0, 0}, |
| {1L, 1, 1}, |
| {-1L, 1, -1}, |
| {2L, 2, 1}, |
| {-2L, 2, -1}, |
| {3L, 2, 1}, |
| {-3L, 2, -1}, |
| {4L, 3, 1}, |
| {-4L, 3, -1}, |
| {0x7fffL, 15, 1}, /* one Python int digit */ |
| {-0x7fffL, 15, -1}, |
| {0xffffL, 16, 1}, |
| {-0xffffL, 16, -1}, |
| {0xfffffffL, 28, 1}, |
| {-0xfffffffL, 28, -1}}; |
| size_t i; |
| |
| for (i = 0; i < Py_ARRAY_LENGTH(testcases); ++i) { |
| size_t nbits; |
| int sign; |
| PyObject *plong; |
| |
| plong = PyLong_FromLong(testcases[i].input); |
| if (plong == NULL) |
| return NULL; |
| nbits = _PyLong_NumBits(plong); |
| sign = _PyLong_Sign(plong); |
| |
| Py_DECREF(plong); |
| if (nbits != testcases[i].nbits) |
| return raiseTestError("test_long_numbits", |
| "wrong result for _PyLong_NumBits"); |
| if (sign != testcases[i].sign) |
| return raiseTestError("test_long_numbits", |
| "wrong result for _PyLong_Sign"); |
| } |
| Py_RETURN_NONE; |
| } |
| |
| /* Example passing NULLs to PyObject_Str(NULL). */ |
| |
| static PyObject * |
| test_null_strings(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| PyObject *o1 = PyObject_Str(NULL), *o2 = PyObject_Str(NULL); |
| PyObject *tuple = PyTuple_Pack(2, o1, o2); |
| Py_XDECREF(o1); |
| Py_XDECREF(o2); |
| return tuple; |
| } |
| |
| static PyObject * |
| raise_exception(PyObject *self, PyObject *args) |
| { |
| PyObject *exc; |
| PyObject *exc_args, *v; |
| int num_args, i; |
| |
| if (!PyArg_ParseTuple(args, "Oi:raise_exception", |
| &exc, &num_args)) |
| return NULL; |
| |
| exc_args = PyTuple_New(num_args); |
| if (exc_args == NULL) |
| return NULL; |
| for (i = 0; i < num_args; ++i) { |
| v = PyLong_FromLong(i); |
| if (v == NULL) { |
| Py_DECREF(exc_args); |
| return NULL; |
| } |
| PyTuple_SET_ITEM(exc_args, i, v); |
| } |
| PyErr_SetObject(exc, exc_args); |
| Py_DECREF(exc_args); |
| return NULL; |
| } |
| |
| static PyObject * |
| set_errno(PyObject *self, PyObject *args) |
| { |
| int new_errno; |
| |
| if (!PyArg_ParseTuple(args, "i:set_errno", &new_errno)) |
| return NULL; |
| |
| errno = new_errno; |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject * |
| test_set_exc_info(PyObject *self, PyObject *args) |
| { |
| PyObject *orig_exc; |
| PyObject *new_type, *new_value, *new_tb; |
| PyObject *type, *value, *tb; |
| if (!PyArg_ParseTuple(args, "OOO:test_set_exc_info", |
| &new_type, &new_value, &new_tb)) |
| return NULL; |
| |
| PyErr_GetExcInfo(&type, &value, &tb); |
| |
| Py_INCREF(new_type); |
| Py_INCREF(new_value); |
| Py_INCREF(new_tb); |
| PyErr_SetExcInfo(new_type, new_value, new_tb); |
| |
| orig_exc = PyTuple_Pack(3, type ? type : Py_None, value ? value : Py_None, tb ? tb : Py_None); |
| Py_XDECREF(type); |
| Py_XDECREF(value); |
| Py_XDECREF(tb); |
| return orig_exc; |
| } |
| |
| static int test_run_counter = 0; |
| |
| static PyObject * |
| test_datetime_capi(PyObject *self, PyObject *args) { |
| if (PyDateTimeAPI) { |
| if (test_run_counter) { |
| /* Probably regrtest.py -R */ |
| Py_RETURN_NONE; |
| } |
| else { |
| PyErr_SetString(PyExc_AssertionError, |
| "PyDateTime_CAPI somehow initialized"); |
| return NULL; |
| } |
| } |
| test_run_counter++; |
| PyDateTime_IMPORT; |
| |
| if (PyDateTimeAPI) |
| Py_RETURN_NONE; |
| else |
| return NULL; |
| } |
| |
| /* Functions exposing the C API type checking for testing */ |
| #define MAKE_DATETIME_CHECK_FUNC(check_method, exact_method) \ |
| PyObject *obj; \ |
| int exact = 0; \ |
| if (!PyArg_ParseTuple(args, "O|p", &obj, &exact)) { \ |
| return NULL; \ |
| } \ |
| int rv = exact?exact_method(obj):check_method(obj); \ |
| if (rv) { \ |
| Py_RETURN_TRUE; \ |
| } else { \ |
| Py_RETURN_FALSE; \ |
| } |
| |
| static PyObject * |
| datetime_check_date(PyObject *self, PyObject *args) { |
| MAKE_DATETIME_CHECK_FUNC(PyDate_Check, PyDate_CheckExact) |
| } |
| |
| static PyObject * |
| datetime_check_time(PyObject *self, PyObject *args) { |
| MAKE_DATETIME_CHECK_FUNC(PyTime_Check, PyTime_CheckExact) |
| } |
| |
| static PyObject * |
| datetime_check_datetime(PyObject *self, PyObject *args) { |
| MAKE_DATETIME_CHECK_FUNC(PyDateTime_Check, PyDateTime_CheckExact) |
| } |
| |
| static PyObject * |
| datetime_check_delta(PyObject *self, PyObject *args) { |
| MAKE_DATETIME_CHECK_FUNC(PyDelta_Check, PyDelta_CheckExact) |
| } |
| |
| static PyObject * |
| datetime_check_tzinfo(PyObject *self, PyObject *args) { |
| MAKE_DATETIME_CHECK_FUNC(PyTZInfo_Check, PyTZInfo_CheckExact) |
| } |
| |
| |
| /* Makes three variations on timezone representing UTC-5: |
| 1. timezone with offset and name from PyDateTimeAPI |
| 2. timezone with offset and name from PyTimeZone_FromOffsetAndName |
| 3. timezone with offset (no name) from PyTimeZone_FromOffset |
| */ |
| static PyObject * |
| make_timezones_capi(PyObject *self, PyObject *args) { |
| PyObject *offset = PyDelta_FromDSU(0, -18000, 0); |
| PyObject *name = PyUnicode_FromString("EST"); |
| |
| PyObject *est_zone_capi = PyDateTimeAPI->TimeZone_FromTimeZone(offset, name); |
| PyObject *est_zone_macro = PyTimeZone_FromOffsetAndName(offset, name); |
| PyObject *est_zone_macro_noname = PyTimeZone_FromOffset(offset); |
| |
| Py_DecRef(offset); |
| Py_DecRef(name); |
| |
| PyObject *rv = PyTuple_New(3); |
| |
| PyTuple_SET_ITEM(rv, 0, est_zone_capi); |
| PyTuple_SET_ITEM(rv, 1, est_zone_macro); |
| PyTuple_SET_ITEM(rv, 2, est_zone_macro_noname); |
| |
| return rv; |
| } |
| |
| static PyObject * |
| get_timezones_offset_zero(PyObject *self, PyObject *args) { |
| PyObject *offset = PyDelta_FromDSU(0, 0, 0); |
| PyObject *name = PyUnicode_FromString(""); |
| |
| // These two should return the UTC singleton |
| PyObject *utc_singleton_0 = PyTimeZone_FromOffset(offset); |
| PyObject *utc_singleton_1 = PyTimeZone_FromOffsetAndName(offset, NULL); |
| |
| // This one will return +00:00 zone, but not the UTC singleton |
| PyObject *non_utc_zone = PyTimeZone_FromOffsetAndName(offset, name); |
| |
| Py_DecRef(offset); |
| Py_DecRef(name); |
| |
| PyObject *rv = PyTuple_New(3); |
| PyTuple_SET_ITEM(rv, 0, utc_singleton_0); |
| PyTuple_SET_ITEM(rv, 1, utc_singleton_1); |
| PyTuple_SET_ITEM(rv, 2, non_utc_zone); |
| |
| return rv; |
| } |
| |
| static PyObject * |
| get_timezone_utc_capi(PyObject* self, PyObject *args) { |
| int macro = 0; |
| if (!PyArg_ParseTuple(args, "|p", ¯o)) { |
| return NULL; |
| } |
| if (macro) { |
| Py_INCREF(PyDateTime_TimeZone_UTC); |
| return PyDateTime_TimeZone_UTC; |
| } else { |
| Py_INCREF(PyDateTimeAPI->TimeZone_UTC); |
| return PyDateTimeAPI->TimeZone_UTC; |
| } |
| } |
| |
| |
| /* test_thread_state spawns a thread of its own, and that thread releases |
| * `thread_done` when it's finished. The driver code has to know when the |
| * thread finishes, because the thread uses a PyObject (the callable) that |
| * may go away when the driver finishes. The former lack of this explicit |
| * synchronization caused rare segfaults, so rare that they were seen only |
| * on a Mac buildbot (although they were possible on any box). |
| */ |
| static PyThread_type_lock thread_done = NULL; |
| |
| static int |
| _make_call(void *callable) |
| { |
| PyObject *rc; |
| int success; |
| PyGILState_STATE s = PyGILState_Ensure(); |
| rc = _PyObject_CallNoArg((PyObject *)callable); |
| success = (rc != NULL); |
| Py_XDECREF(rc); |
| PyGILState_Release(s); |
| return success; |
| } |
| |
| /* Same thing, but releases `thread_done` when it returns. This variant |
| * should be called only from threads spawned by test_thread_state(). |
| */ |
| static void |
| _make_call_from_thread(void *callable) |
| { |
| _make_call(callable); |
| PyThread_release_lock(thread_done); |
| } |
| |
| static PyObject * |
| test_thread_state(PyObject *self, PyObject *args) |
| { |
| PyObject *fn; |
| int success = 1; |
| |
| if (!PyArg_ParseTuple(args, "O:test_thread_state", &fn)) |
| return NULL; |
| |
| if (!PyCallable_Check(fn)) { |
| PyErr_Format(PyExc_TypeError, "'%s' object is not callable", |
| fn->ob_type->tp_name); |
| return NULL; |
| } |
| |
| /* Ensure Python is set up for threading */ |
| PyEval_InitThreads(); |
| thread_done = PyThread_allocate_lock(); |
| if (thread_done == NULL) |
| return PyErr_NoMemory(); |
| PyThread_acquire_lock(thread_done, 1); |
| |
| /* Start a new thread with our callback. */ |
| PyThread_start_new_thread(_make_call_from_thread, fn); |
| /* Make the callback with the thread lock held by this thread */ |
| success &= _make_call(fn); |
| /* Do it all again, but this time with the thread-lock released */ |
| Py_BEGIN_ALLOW_THREADS |
| success &= _make_call(fn); |
| PyThread_acquire_lock(thread_done, 1); /* wait for thread to finish */ |
| Py_END_ALLOW_THREADS |
| |
| /* And once more with and without a thread |
| XXX - should use a lock and work out exactly what we are trying |
| to test <wink> |
| */ |
| Py_BEGIN_ALLOW_THREADS |
| PyThread_start_new_thread(_make_call_from_thread, fn); |
| success &= _make_call(fn); |
| PyThread_acquire_lock(thread_done, 1); /* wait for thread to finish */ |
| Py_END_ALLOW_THREADS |
| |
| /* Release lock we acquired above. This is required on HP-UX. */ |
| PyThread_release_lock(thread_done); |
| |
| PyThread_free_lock(thread_done); |
| if (!success) |
| return NULL; |
| Py_RETURN_NONE; |
| } |
| |
| /* test Py_AddPendingCalls using threads */ |
| static int _pending_callback(void *arg) |
| { |
| /* we assume the argument is callable object to which we own a reference */ |
| PyObject *callable = (PyObject *)arg; |
| PyObject *r = _PyObject_CallNoArg(callable); |
| Py_DECREF(callable); |
| Py_XDECREF(r); |
| return r != NULL ? 0 : -1; |
| } |
| |
| /* The following requests n callbacks to _pending_callback. It can be |
| * run from any python thread. |
| */ |
| static PyObject * |
| pending_threadfunc(PyObject *self, PyObject *arg) |
| { |
| PyObject *callable; |
| int r; |
| if (PyArg_ParseTuple(arg, "O", &callable) == 0) |
| return NULL; |
| |
| /* create the reference for the callbackwhile we hold the lock */ |
| Py_INCREF(callable); |
| |
| Py_BEGIN_ALLOW_THREADS |
| r = Py_AddPendingCall(&_pending_callback, callable); |
| Py_END_ALLOW_THREADS |
| |
| if (r<0) { |
| Py_DECREF(callable); /* unsuccessful add, destroy the extra reference */ |
| Py_RETURN_FALSE; |
| } |
| Py_RETURN_TRUE; |
| } |
| |
| /* Some tests of PyUnicode_FromFormat(). This needs more tests. */ |
| static PyObject * |
| test_string_from_format(PyObject *self, PyObject *args) |
| { |
| PyObject *result; |
| char *msg; |
| |
| #define CHECK_1_FORMAT(FORMAT, TYPE) \ |
| result = PyUnicode_FromFormat(FORMAT, (TYPE)1); \ |
| if (result == NULL) \ |
| return NULL; \ |
| if (!_PyUnicode_EqualToASCIIString(result, "1")) { \ |
| msg = FORMAT " failed at 1"; \ |
| goto Fail; \ |
| } \ |
| Py_DECREF(result) |
| |
| CHECK_1_FORMAT("%d", int); |
| CHECK_1_FORMAT("%ld", long); |
| /* The z width modifier was added in Python 2.5. */ |
| CHECK_1_FORMAT("%zd", Py_ssize_t); |
| |
| /* The u type code was added in Python 2.5. */ |
| CHECK_1_FORMAT("%u", unsigned int); |
| CHECK_1_FORMAT("%lu", unsigned long); |
| CHECK_1_FORMAT("%zu", size_t); |
| |
| /* "%lld" and "%llu" support added in Python 2.7. */ |
| CHECK_1_FORMAT("%llu", unsigned long long); |
| CHECK_1_FORMAT("%lld", long long); |
| |
| Py_RETURN_NONE; |
| |
| Fail: |
| Py_XDECREF(result); |
| return raiseTestError("test_string_from_format", msg); |
| |
| #undef CHECK_1_FORMAT |
| } |
| |
| |
| static PyObject * |
| test_unicode_compare_with_ascii(PyObject *self, PyObject *Py_UNUSED(ignored)) { |
| PyObject *py_s = PyUnicode_FromStringAndSize("str\0", 4); |
| int result; |
| if (py_s == NULL) |
| return NULL; |
| result = PyUnicode_CompareWithASCIIString(py_s, "str"); |
| Py_DECREF(py_s); |
| if (!result) { |
| PyErr_SetString(TestError, "Python string ending in NULL " |
| "should not compare equal to c string."); |
| return NULL; |
| } |
| Py_RETURN_NONE; |
| } |
| |
| /* This is here to provide a docstring for test_descr. */ |
| static PyObject * |
| test_with_docstring(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| Py_RETURN_NONE; |
| } |
| |
| /* Test PyOS_string_to_double. */ |
| static PyObject * |
| test_string_to_double(PyObject *self, PyObject *Py_UNUSED(ignored)) { |
| double result; |
| const char *msg; |
| |
| #define CHECK_STRING(STR, expected) \ |
| result = PyOS_string_to_double(STR, NULL, NULL); \ |
| if (result == -1.0 && PyErr_Occurred()) \ |
| return NULL; \ |
| if (result != (double)expected) { \ |
| msg = "conversion of " STR " to float failed"; \ |
| goto fail; \ |
| } |
| |
| #define CHECK_INVALID(STR) \ |
| result = PyOS_string_to_double(STR, NULL, NULL); \ |
| if (result == -1.0 && PyErr_Occurred()) { \ |
| if (PyErr_ExceptionMatches(PyExc_ValueError)) \ |
| PyErr_Clear(); \ |
| else \ |
| return NULL; \ |
| } \ |
| else { \ |
| msg = "conversion of " STR " didn't raise ValueError"; \ |
| goto fail; \ |
| } |
| |
| CHECK_STRING("0.1", 0.1); |
| CHECK_STRING("1.234", 1.234); |
| CHECK_STRING("-1.35", -1.35); |
| CHECK_STRING(".1e01", 1.0); |
| CHECK_STRING("2.e-2", 0.02); |
| |
| CHECK_INVALID(" 0.1"); |
| CHECK_INVALID("\t\n-3"); |
| CHECK_INVALID(".123 "); |
| CHECK_INVALID("3\n"); |
| CHECK_INVALID("123abc"); |
| |
| Py_RETURN_NONE; |
| fail: |
| return raiseTestError("test_string_to_double", msg); |
| #undef CHECK_STRING |
| #undef CHECK_INVALID |
| } |
| |
| |
| /* Coverage testing of capsule objects. */ |
| |
| static const char *capsule_name = "capsule name"; |
| static char *capsule_pointer = "capsule pointer"; |
| static char *capsule_context = "capsule context"; |
| static const char *capsule_error = NULL; |
| static int |
| capsule_destructor_call_count = 0; |
| |
| static void |
| capsule_destructor(PyObject *o) { |
| capsule_destructor_call_count++; |
| if (PyCapsule_GetContext(o) != capsule_context) { |
| capsule_error = "context did not match in destructor!"; |
| } else if (PyCapsule_GetDestructor(o) != capsule_destructor) { |
| capsule_error = "destructor did not match in destructor! (woah!)"; |
| } else if (PyCapsule_GetName(o) != capsule_name) { |
| capsule_error = "name did not match in destructor!"; |
| } else if (PyCapsule_GetPointer(o, capsule_name) != capsule_pointer) { |
| capsule_error = "pointer did not match in destructor!"; |
| } |
| } |
| |
| typedef struct { |
| char *name; |
| char *module; |
| char *attribute; |
| } known_capsule; |
| |
| static PyObject * |
| test_capsule(PyObject *self, PyObject *args) |
| { |
| PyObject *object; |
| const char *error = NULL; |
| void *pointer; |
| void *pointer2; |
| known_capsule known_capsules[] = { |
| #define KNOWN_CAPSULE(module, name) { module "." name, module, name } |
| KNOWN_CAPSULE("_socket", "CAPI"), |
| KNOWN_CAPSULE("_curses", "_C_API"), |
| KNOWN_CAPSULE("datetime", "datetime_CAPI"), |
| { NULL, NULL }, |
| }; |
| known_capsule *known = &known_capsules[0]; |
| |
| #define FAIL(x) { error = (x); goto exit; } |
| |
| #define CHECK_DESTRUCTOR \ |
| if (capsule_error) { \ |
| FAIL(capsule_error); \ |
| } \ |
| else if (!capsule_destructor_call_count) { \ |
| FAIL("destructor not called!"); \ |
| } \ |
| capsule_destructor_call_count = 0; \ |
| |
| object = PyCapsule_New(capsule_pointer, capsule_name, capsule_destructor); |
| PyCapsule_SetContext(object, capsule_context); |
| capsule_destructor(object); |
| CHECK_DESTRUCTOR; |
| Py_DECREF(object); |
| CHECK_DESTRUCTOR; |
| |
| object = PyCapsule_New(known, "ignored", NULL); |
| PyCapsule_SetPointer(object, capsule_pointer); |
| PyCapsule_SetName(object, capsule_name); |
| PyCapsule_SetDestructor(object, capsule_destructor); |
| PyCapsule_SetContext(object, capsule_context); |
| capsule_destructor(object); |
| CHECK_DESTRUCTOR; |
| /* intentionally access using the wrong name */ |
| pointer2 = PyCapsule_GetPointer(object, "the wrong name"); |
| if (!PyErr_Occurred()) { |
| FAIL("PyCapsule_GetPointer should have failed but did not!"); |
| } |
| PyErr_Clear(); |
| if (pointer2) { |
| if (pointer2 == capsule_pointer) { |
| FAIL("PyCapsule_GetPointer should not have" |
| " returned the internal pointer!"); |
| } else { |
| FAIL("PyCapsule_GetPointer should have " |
| "returned NULL pointer but did not!"); |
| } |
| } |
| PyCapsule_SetDestructor(object, NULL); |
| Py_DECREF(object); |
| if (capsule_destructor_call_count) { |
| FAIL("destructor called when it should not have been!"); |
| } |
| |
| for (known = &known_capsules[0]; known->module != NULL; known++) { |
| /* yeah, ordinarily I wouldn't do this either, |
| but it's fine for this test harness. |
| */ |
| static char buffer[256]; |
| #undef FAIL |
| #define FAIL(x) \ |
| { \ |
| sprintf(buffer, "%s module: \"%s\" attribute: \"%s\"", \ |
| x, known->module, known->attribute); \ |
| error = buffer; \ |
| goto exit; \ |
| } \ |
| |
| PyObject *module = PyImport_ImportModule(known->module); |
| if (module) { |
| pointer = PyCapsule_Import(known->name, 0); |
| if (!pointer) { |
| Py_DECREF(module); |
| FAIL("PyCapsule_GetPointer returned NULL unexpectedly!"); |
| } |
| object = PyObject_GetAttrString(module, known->attribute); |
| if (!object) { |
| Py_DECREF(module); |
| return NULL; |
| } |
| pointer2 = PyCapsule_GetPointer(object, |
| "weebles wobble but they don't fall down"); |
| if (!PyErr_Occurred()) { |
| Py_DECREF(object); |
| Py_DECREF(module); |
| FAIL("PyCapsule_GetPointer should have failed but did not!"); |
| } |
| PyErr_Clear(); |
| if (pointer2) { |
| Py_DECREF(module); |
| Py_DECREF(object); |
| if (pointer2 == pointer) { |
| FAIL("PyCapsule_GetPointer should not have" |
| " returned its internal pointer!"); |
| } else { |
| FAIL("PyCapsule_GetPointer should have" |
| " returned NULL pointer but did not!"); |
| } |
| } |
| Py_DECREF(object); |
| Py_DECREF(module); |
| } |
| else |
| PyErr_Clear(); |
| } |
| |
| exit: |
| if (error) { |
| return raiseTestError("test_capsule", error); |
| } |
| Py_RETURN_NONE; |
| #undef FAIL |
| } |
| |
| #ifdef HAVE_GETTIMEOFDAY |
| /* Profiling of integer performance */ |
| static void print_delta(int test, struct timeval *s, struct timeval *e) |
| { |
| e->tv_sec -= s->tv_sec; |
| e->tv_usec -= s->tv_usec; |
| if (e->tv_usec < 0) { |
| e->tv_sec -=1; |
| e->tv_usec += 1000000; |
| } |
| printf("Test %d: %d.%06ds\n", test, (int)e->tv_sec, (int)e->tv_usec); |
| } |
| |
| static PyObject * |
| profile_int(PyObject *self, PyObject* args) |
| { |
| int i, k; |
| struct timeval start, stop; |
| PyObject *single, **multiple, *op1, *result; |
| |
| /* Test 1: Allocate and immediately deallocate |
| many small integers */ |
| gettimeofday(&start, NULL); |
| for(k=0; k < 20000; k++) |
| for(i=0; i < 1000; i++) { |
| single = PyLong_FromLong(i); |
| Py_DECREF(single); |
| } |
| gettimeofday(&stop, NULL); |
| print_delta(1, &start, &stop); |
| |
| /* Test 2: Allocate and immediately deallocate |
| many large integers */ |
| gettimeofday(&start, NULL); |
| for(k=0; k < 20000; k++) |
| for(i=0; i < 1000; i++) { |
| single = PyLong_FromLong(i+1000000); |
| Py_DECREF(single); |
| } |
| gettimeofday(&stop, NULL); |
| print_delta(2, &start, &stop); |
| |
| /* Test 3: Allocate a few integers, then release |
| them all simultaneously. */ |
| multiple = malloc(sizeof(PyObject*) * 1000); |
| if (multiple == NULL) |
| return PyErr_NoMemory(); |
| gettimeofday(&start, NULL); |
| for(k=0; k < 20000; k++) { |
| for(i=0; i < 1000; i++) { |
| multiple[i] = PyLong_FromLong(i+1000000); |
| } |
| for(i=0; i < 1000; i++) { |
| Py_DECREF(multiple[i]); |
| } |
| } |
| gettimeofday(&stop, NULL); |
| print_delta(3, &start, &stop); |
| free(multiple); |
| |
| /* Test 4: Allocate many integers, then release |
| them all simultaneously. */ |
| multiple = malloc(sizeof(PyObject*) * 1000000); |
| if (multiple == NULL) |
| return PyErr_NoMemory(); |
| gettimeofday(&start, NULL); |
| for(k=0; k < 20; k++) { |
| for(i=0; i < 1000000; i++) { |
| multiple[i] = PyLong_FromLong(i+1000000); |
| } |
| for(i=0; i < 1000000; i++) { |
| Py_DECREF(multiple[i]); |
| } |
| } |
| gettimeofday(&stop, NULL); |
| print_delta(4, &start, &stop); |
| free(multiple); |
| |
| /* Test 5: Allocate many integers < 32000 */ |
| multiple = malloc(sizeof(PyObject*) * 1000000); |
| if (multiple == NULL) |
| return PyErr_NoMemory(); |
| gettimeofday(&start, NULL); |
| for(k=0; k < 10; k++) { |
| for(i=0; i < 1000000; i++) { |
| multiple[i] = PyLong_FromLong(i+1000); |
| } |
| for(i=0; i < 1000000; i++) { |
| Py_DECREF(multiple[i]); |
| } |
| } |
| gettimeofday(&stop, NULL); |
| print_delta(5, &start, &stop); |
| free(multiple); |
| |
| /* Test 6: Perform small int addition */ |
| op1 = PyLong_FromLong(1); |
| gettimeofday(&start, NULL); |
| for(i=0; i < 10000000; i++) { |
| result = PyNumber_Add(op1, op1); |
| Py_DECREF(result); |
| } |
| gettimeofday(&stop, NULL); |
| Py_DECREF(op1); |
| print_delta(6, &start, &stop); |
| |
| /* Test 7: Perform medium int addition */ |
| op1 = PyLong_FromLong(1000); |
| if (op1 == NULL) |
| return NULL; |
| gettimeofday(&start, NULL); |
| for(i=0; i < 10000000; i++) { |
| result = PyNumber_Add(op1, op1); |
| Py_XDECREF(result); |
| } |
| gettimeofday(&stop, NULL); |
| Py_DECREF(op1); |
| print_delta(7, &start, &stop); |
| |
| Py_RETURN_NONE; |
| } |
| #endif |
| |
| /* To test the format of tracebacks as printed out. */ |
| static PyObject * |
| traceback_print(PyObject *self, PyObject *args) |
| { |
| PyObject *file; |
| PyObject *traceback; |
| int result; |
| |
| if (!PyArg_ParseTuple(args, "OO:traceback_print", |
| &traceback, &file)) |
| return NULL; |
| |
| result = PyTraceBack_Print(traceback, file); |
| if (result < 0) |
| return NULL; |
| Py_RETURN_NONE; |
| } |
| |
| /* To test the format of exceptions as printed out. */ |
| static PyObject * |
| exception_print(PyObject *self, PyObject *args) |
| { |
| PyObject *value; |
| PyObject *tb; |
| |
| if (!PyArg_ParseTuple(args, "O:exception_print", |
| &value)) |
| return NULL; |
| if (!PyExceptionInstance_Check(value)) { |
| PyErr_Format(PyExc_TypeError, "an exception instance is required"); |
| return NULL; |
| } |
| |
| tb = PyException_GetTraceback(value); |
| PyErr_Display((PyObject *) Py_TYPE(value), value, tb); |
| Py_XDECREF(tb); |
| |
| Py_RETURN_NONE; |
| } |
| |
| |
| |
| |
| /* reliably raise a MemoryError */ |
| static PyObject * |
| raise_memoryerror(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| PyErr_NoMemory(); |
| return NULL; |
| } |
| |
| /* Issue 6012 */ |
| static PyObject *str1, *str2; |
| static int |
| failing_converter(PyObject *obj, void *arg) |
| { |
| /* Clone str1, then let the conversion fail. */ |
| assert(str1); |
| str2 = str1; |
| Py_INCREF(str2); |
| return 0; |
| } |
| static PyObject* |
| argparsing(PyObject *o, PyObject *args) |
| { |
| PyObject *res; |
| str1 = str2 = NULL; |
| if (!PyArg_ParseTuple(args, "O&O&", |
| PyUnicode_FSConverter, &str1, |
| failing_converter, &str2)) { |
| if (!str2) |
| /* argument converter not called? */ |
| return NULL; |
| /* Should be 1 */ |
| res = PyLong_FromSsize_t(Py_REFCNT(str2)); |
| Py_DECREF(str2); |
| PyErr_Clear(); |
| return res; |
| } |
| Py_RETURN_NONE; |
| } |
| |
| /* To test that the result of PyCode_NewEmpty has the right members. */ |
| static PyObject * |
| code_newempty(PyObject *self, PyObject *args) |
| { |
| const char *filename; |
| const char *funcname; |
| int firstlineno; |
| |
| if (!PyArg_ParseTuple(args, "ssi:code_newempty", |
| &filename, &funcname, &firstlineno)) |
| return NULL; |
| |
| return (PyObject *)PyCode_NewEmpty(filename, funcname, firstlineno); |
| } |
| |
| /* Test PyErr_NewExceptionWithDoc (also exercise PyErr_NewException). |
| Run via Lib/test/test_exceptions.py */ |
| static PyObject * |
| make_exception_with_doc(PyObject *self, PyObject *args, PyObject *kwargs) |
| { |
| const char *name; |
| const char *doc = NULL; |
| PyObject *base = NULL; |
| PyObject *dict = NULL; |
| |
| static char *kwlist[] = {"name", "doc", "base", "dict", NULL}; |
| |
| if (!PyArg_ParseTupleAndKeywords(args, kwargs, |
| "s|sOO:make_exception_with_doc", kwlist, |
| &name, &doc, &base, &dict)) |
| return NULL; |
| |
| return PyErr_NewExceptionWithDoc(name, doc, base, dict); |
| } |
| |
| static PyObject * |
| make_memoryview_from_NULL_pointer(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| Py_buffer info; |
| if (PyBuffer_FillInfo(&info, NULL, NULL, 1, 1, PyBUF_FULL_RO) < 0) |
| return NULL; |
| return PyMemoryView_FromBuffer(&info); |
| } |
| |
| static PyObject * |
| test_from_contiguous(PyObject* self, PyObject *noargs) |
| { |
| int data[9] = {-1,-1,-1,-1,-1,-1,-1,-1,-1}; |
| int init[5] = {0, 1, 2, 3, 4}; |
| Py_ssize_t itemsize = sizeof(int); |
| Py_ssize_t shape = 5; |
| Py_ssize_t strides = 2 * itemsize; |
| Py_buffer view = { |
| data, |
| NULL, |
| 5 * itemsize, |
| itemsize, |
| 1, |
| 1, |
| NULL, |
| &shape, |
| &strides, |
| NULL, |
| NULL |
| }; |
| int *ptr; |
| int i; |
| |
| PyBuffer_FromContiguous(&view, init, view.len, 'C'); |
| ptr = view.buf; |
| for (i = 0; i < 5; i++) { |
| if (ptr[2*i] != i) { |
| PyErr_SetString(TestError, |
| "test_from_contiguous: incorrect result"); |
| return NULL; |
| } |
| } |
| |
| view.buf = &data[8]; |
| view.strides[0] = -2 * itemsize; |
| |
| PyBuffer_FromContiguous(&view, init, view.len, 'C'); |
| ptr = view.buf; |
| for (i = 0; i < 5; i++) { |
| if (*(ptr-2*i) != i) { |
| PyErr_SetString(TestError, |
| "test_from_contiguous: incorrect result"); |
| return NULL; |
| } |
| } |
| |
| Py_RETURN_NONE; |
| } |
| |
| #if (defined(__linux__) || defined(__FreeBSD__)) && defined(__GNUC__) |
| extern PyTypeObject _PyBytesIOBuffer_Type; |
| |
| static PyObject * |
| test_pep3118_obsolete_write_locks(PyObject* self, PyObject *noargs) |
| { |
| PyTypeObject *type = &_PyBytesIOBuffer_Type; |
| PyObject *b; |
| char *dummy[1]; |
| int ret, match; |
| |
| /* PyBuffer_FillInfo() */ |
| ret = PyBuffer_FillInfo(NULL, NULL, dummy, 1, 0, PyBUF_SIMPLE); |
| match = PyErr_Occurred() && PyErr_ExceptionMatches(PyExc_BufferError); |
| PyErr_Clear(); |
| if (ret != -1 || match == 0) |
| goto error; |
| |
| /* bytesiobuf_getbuffer() */ |
| b = type->tp_alloc(type, 0); |
| if (b == NULL) { |
| return NULL; |
| } |
| |
| ret = PyObject_GetBuffer(b, NULL, PyBUF_SIMPLE); |
| Py_DECREF(b); |
| match = PyErr_Occurred() && PyErr_ExceptionMatches(PyExc_BufferError); |
| PyErr_Clear(); |
| if (ret != -1 || match == 0) |
| goto error; |
| |
| Py_RETURN_NONE; |
| |
| error: |
| PyErr_SetString(TestError, |
| "test_pep3118_obsolete_write_locks: failure"); |
| return NULL; |
| } |
| #endif |
| |
| /* This tests functions that historically supported write locks. It is |
| wrong to call getbuffer() with view==NULL and a compliant getbufferproc |
| is entitled to segfault in that case. */ |
| static PyObject * |
| getbuffer_with_null_view(PyObject* self, PyObject *obj) |
| { |
| if (PyObject_GetBuffer(obj, NULL, PyBUF_SIMPLE) < 0) |
| return NULL; |
| |
| Py_RETURN_NONE; |
| } |
| |
| /* Test that the fatal error from not having a current thread doesn't |
| cause an infinite loop. Run via Lib/test/test_capi.py */ |
| static PyObject * |
| crash_no_current_thread(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| Py_BEGIN_ALLOW_THREADS |
| /* Using PyThreadState_Get() directly allows the test to pass in |
| !pydebug mode. However, the test only actually tests anything |
| in pydebug mode, since that's where the infinite loop was in |
| the first place. */ |
| PyThreadState_Get(); |
| Py_END_ALLOW_THREADS |
| return NULL; |
| } |
| |
| /* To run some code in a sub-interpreter. */ |
| static PyObject * |
| run_in_subinterp(PyObject *self, PyObject *args) |
| { |
| const char *code; |
| int r; |
| PyThreadState *substate, *mainstate; |
| |
| if (!PyArg_ParseTuple(args, "s:run_in_subinterp", |
| &code)) |
| return NULL; |
| |
| mainstate = PyThreadState_Get(); |
| |
| PyThreadState_Swap(NULL); |
| |
| substate = Py_NewInterpreter(); |
| if (substate == NULL) { |
| /* Since no new thread state was created, there is no exception to |
| propagate; raise a fresh one after swapping in the old thread |
| state. */ |
| PyThreadState_Swap(mainstate); |
| PyErr_SetString(PyExc_RuntimeError, "sub-interpreter creation failed"); |
| return NULL; |
| } |
| r = PyRun_SimpleString(code); |
| Py_EndInterpreter(substate); |
| |
| PyThreadState_Swap(mainstate); |
| |
| return PyLong_FromLong(r); |
| } |
| |
| static int |
| check_time_rounding(int round) |
| { |
| if (round != _PyTime_ROUND_FLOOR |
| && round != _PyTime_ROUND_CEILING |
| && round != _PyTime_ROUND_HALF_EVEN |
| && round != _PyTime_ROUND_UP) { |
| PyErr_SetString(PyExc_ValueError, "invalid rounding"); |
| return -1; |
| } |
| return 0; |
| } |
| |
| static PyObject * |
| test_pytime_object_to_time_t(PyObject *self, PyObject *args) |
| { |
| PyObject *obj; |
| time_t sec; |
| int round; |
| if (!PyArg_ParseTuple(args, "Oi:pytime_object_to_time_t", &obj, &round)) |
| return NULL; |
| if (check_time_rounding(round) < 0) |
| return NULL; |
| if (_PyTime_ObjectToTime_t(obj, &sec, round) == -1) |
| return NULL; |
| return _PyLong_FromTime_t(sec); |
| } |
| |
| static PyObject * |
| test_pytime_object_to_timeval(PyObject *self, PyObject *args) |
| { |
| PyObject *obj; |
| time_t sec; |
| long usec; |
| int round; |
| if (!PyArg_ParseTuple(args, "Oi:pytime_object_to_timeval", &obj, &round)) |
| return NULL; |
| if (check_time_rounding(round) < 0) |
| return NULL; |
| if (_PyTime_ObjectToTimeval(obj, &sec, &usec, round) == -1) |
| return NULL; |
| return Py_BuildValue("Nl", _PyLong_FromTime_t(sec), usec); |
| } |
| |
| static PyObject * |
| test_pytime_object_to_timespec(PyObject *self, PyObject *args) |
| { |
| PyObject *obj; |
| time_t sec; |
| long nsec; |
| int round; |
| if (!PyArg_ParseTuple(args, "Oi:pytime_object_to_timespec", &obj, &round)) |
| return NULL; |
| if (check_time_rounding(round) < 0) |
| return NULL; |
| if (_PyTime_ObjectToTimespec(obj, &sec, &nsec, round) == -1) |
| return NULL; |
| return Py_BuildValue("Nl", _PyLong_FromTime_t(sec), nsec); |
| } |
| |
| static void |
| slot_tp_del(PyObject *self) |
| { |
| _Py_IDENTIFIER(__tp_del__); |
| PyObject *del, *res; |
| PyObject *error_type, *error_value, *error_traceback; |
| |
| /* Temporarily resurrect the object. */ |
| assert(self->ob_refcnt == 0); |
| self->ob_refcnt = 1; |
| |
| /* Save the current exception, if any. */ |
| PyErr_Fetch(&error_type, &error_value, &error_traceback); |
| |
| /* Execute __del__ method, if any. */ |
| del = _PyObject_LookupSpecial(self, &PyId___tp_del__); |
| if (del != NULL) { |
| res = _PyObject_CallNoArg(del); |
| if (res == NULL) |
| PyErr_WriteUnraisable(del); |
| else |
| Py_DECREF(res); |
| Py_DECREF(del); |
| } |
| |
| /* Restore the saved exception. */ |
| PyErr_Restore(error_type, error_value, error_traceback); |
| |
| /* Undo the temporary resurrection; can't use DECREF here, it would |
| * cause a recursive call. |
| */ |
| assert(self->ob_refcnt > 0); |
| if (--self->ob_refcnt == 0) |
| return; /* this is the normal path out */ |
| |
| /* __del__ resurrected it! Make it look like the original Py_DECREF |
| * never happened. |
| */ |
| { |
| Py_ssize_t refcnt = self->ob_refcnt; |
| _Py_NewReference(self); |
| self->ob_refcnt = refcnt; |
| } |
| assert(!PyType_IS_GC(Py_TYPE(self)) || _PyObject_GC_IS_TRACKED(self)); |
| /* If Py_REF_DEBUG, _Py_NewReference bumped _Py_RefTotal, so |
| * we need to undo that. */ |
| _Py_DEC_REFTOTAL; |
| /* If Py_TRACE_REFS, _Py_NewReference re-added self to the object |
| * chain, so no more to do there. |
| * If COUNT_ALLOCS, the original decref bumped tp_frees, and |
| * _Py_NewReference bumped tp_allocs: both of those need to be |
| * undone. |
| */ |
| #ifdef COUNT_ALLOCS |
| --Py_TYPE(self)->tp_frees; |
| --Py_TYPE(self)->tp_allocs; |
| #endif |
| } |
| |
| static PyObject * |
| with_tp_del(PyObject *self, PyObject *args) |
| { |
| PyObject *obj; |
| PyTypeObject *tp; |
| |
| if (!PyArg_ParseTuple(args, "O:with_tp_del", &obj)) |
| return NULL; |
| tp = (PyTypeObject *) obj; |
| if (!PyType_Check(obj) || !PyType_HasFeature(tp, Py_TPFLAGS_HEAPTYPE)) { |
| PyErr_Format(PyExc_TypeError, |
| "heap type expected, got %R", obj); |
| return NULL; |
| } |
| tp->tp_del = slot_tp_del; |
| Py_INCREF(obj); |
| return obj; |
| } |
| |
| static PyMethodDef ml; |
| |
| static PyObject * |
| create_cfunction(PyObject *self, PyObject *args) |
| { |
| return PyCFunction_NewEx(&ml, self, NULL); |
| } |
| |
| static PyMethodDef ml = { |
| "create_cfunction", |
| create_cfunction, |
| METH_NOARGS, |
| NULL |
| }; |
| |
| static PyObject * |
| _test_incref(PyObject *ob) |
| { |
| Py_INCREF(ob); |
| return ob; |
| } |
| |
| static PyObject * |
| test_xincref_doesnt_leak(PyObject *ob, PyObject *Py_UNUSED(ignored)) |
| { |
| PyObject *obj = PyLong_FromLong(0); |
| Py_XINCREF(_test_incref(obj)); |
| Py_DECREF(obj); |
| Py_DECREF(obj); |
| Py_DECREF(obj); |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject * |
| test_incref_doesnt_leak(PyObject *ob, PyObject *Py_UNUSED(ignored)) |
| { |
| PyObject *obj = PyLong_FromLong(0); |
| Py_INCREF(_test_incref(obj)); |
| Py_DECREF(obj); |
| Py_DECREF(obj); |
| Py_DECREF(obj); |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject * |
| test_xdecref_doesnt_leak(PyObject *ob, PyObject *Py_UNUSED(ignored)) |
| { |
| Py_XDECREF(PyLong_FromLong(0)); |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject * |
| test_decref_doesnt_leak(PyObject *ob, PyObject *Py_UNUSED(ignored)) |
| { |
| Py_DECREF(PyLong_FromLong(0)); |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject * |
| test_incref_decref_API(PyObject *ob, PyObject *Py_UNUSED(ignored)) |
| { |
| PyObject *obj = PyLong_FromLong(0); |
| Py_IncRef(obj); |
| Py_DecRef(obj); |
| Py_DecRef(obj); |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject * |
| test_pymem_alloc0(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| void *ptr; |
| |
| ptr = PyMem_RawMalloc(0); |
| if (ptr == NULL) { |
| PyErr_SetString(PyExc_RuntimeError, "PyMem_RawMalloc(0) returns NULL"); |
| return NULL; |
| } |
| PyMem_RawFree(ptr); |
| |
| ptr = PyMem_RawCalloc(0, 0); |
| if (ptr == NULL) { |
| PyErr_SetString(PyExc_RuntimeError, "PyMem_RawCalloc(0, 0) returns NULL"); |
| return NULL; |
| } |
| PyMem_RawFree(ptr); |
| |
| ptr = PyMem_Malloc(0); |
| if (ptr == NULL) { |
| PyErr_SetString(PyExc_RuntimeError, "PyMem_Malloc(0) returns NULL"); |
| return NULL; |
| } |
| PyMem_Free(ptr); |
| |
| ptr = PyMem_Calloc(0, 0); |
| if (ptr == NULL) { |
| PyErr_SetString(PyExc_RuntimeError, "PyMem_Calloc(0, 0) returns NULL"); |
| return NULL; |
| } |
| PyMem_Free(ptr); |
| |
| ptr = PyObject_Malloc(0); |
| if (ptr == NULL) { |
| PyErr_SetString(PyExc_RuntimeError, "PyObject_Malloc(0) returns NULL"); |
| return NULL; |
| } |
| PyObject_Free(ptr); |
| |
| ptr = PyObject_Calloc(0, 0); |
| if (ptr == NULL) { |
| PyErr_SetString(PyExc_RuntimeError, "PyObject_Calloc(0, 0) returns NULL"); |
| return NULL; |
| } |
| PyObject_Free(ptr); |
| |
| Py_RETURN_NONE; |
| } |
| |
| typedef struct { |
| PyMemAllocatorEx alloc; |
| |
| size_t malloc_size; |
| size_t calloc_nelem; |
| size_t calloc_elsize; |
| void *realloc_ptr; |
| size_t realloc_new_size; |
| void *free_ptr; |
| void *ctx; |
| } alloc_hook_t; |
| |
| static void* hook_malloc(void* ctx, size_t size) |
| { |
| alloc_hook_t *hook = (alloc_hook_t *)ctx; |
| hook->ctx = ctx; |
| hook->malloc_size = size; |
| return hook->alloc.malloc(hook->alloc.ctx, size); |
| } |
| |
| static void* hook_calloc(void* ctx, size_t nelem, size_t elsize) |
| { |
| alloc_hook_t *hook = (alloc_hook_t *)ctx; |
| hook->ctx = ctx; |
| hook->calloc_nelem = nelem; |
| hook->calloc_elsize = elsize; |
| return hook->alloc.calloc(hook->alloc.ctx, nelem, elsize); |
| } |
| |
| static void* hook_realloc(void* ctx, void* ptr, size_t new_size) |
| { |
| alloc_hook_t *hook = (alloc_hook_t *)ctx; |
| hook->ctx = ctx; |
| hook->realloc_ptr = ptr; |
| hook->realloc_new_size = new_size; |
| return hook->alloc.realloc(hook->alloc.ctx, ptr, new_size); |
| } |
| |
| static void hook_free(void *ctx, void *ptr) |
| { |
| alloc_hook_t *hook = (alloc_hook_t *)ctx; |
| hook->ctx = ctx; |
| hook->free_ptr = ptr; |
| hook->alloc.free(hook->alloc.ctx, ptr); |
| } |
| |
| static PyObject * |
| test_setallocators(PyMemAllocatorDomain domain) |
| { |
| PyObject *res = NULL; |
| const char *error_msg; |
| alloc_hook_t hook; |
| PyMemAllocatorEx alloc; |
| size_t size, size2, nelem, elsize; |
| void *ptr, *ptr2; |
| |
| memset(&hook, 0, sizeof(hook)); |
| |
| alloc.ctx = &hook; |
| alloc.malloc = &hook_malloc; |
| alloc.calloc = &hook_calloc; |
| alloc.realloc = &hook_realloc; |
| alloc.free = &hook_free; |
| PyMem_GetAllocator(domain, &hook.alloc); |
| PyMem_SetAllocator(domain, &alloc); |
| |
| /* malloc, realloc, free */ |
| size = 42; |
| hook.ctx = NULL; |
| switch(domain) |
| { |
| case PYMEM_DOMAIN_RAW: ptr = PyMem_RawMalloc(size); break; |
| case PYMEM_DOMAIN_MEM: ptr = PyMem_Malloc(size); break; |
| case PYMEM_DOMAIN_OBJ: ptr = PyObject_Malloc(size); break; |
| default: ptr = NULL; break; |
| } |
| |
| #define CHECK_CTX(FUNC) \ |
| if (hook.ctx != &hook) { \ |
| error_msg = FUNC " wrong context"; \ |
| goto fail; \ |
| } \ |
| hook.ctx = NULL; /* reset for next check */ |
| |
| if (ptr == NULL) { |
| error_msg = "malloc failed"; |
| goto fail; |
| } |
| CHECK_CTX("malloc"); |
| if (hook.malloc_size != size) { |
| error_msg = "malloc invalid size"; |
| goto fail; |
| } |
| |
| size2 = 200; |
| switch(domain) |
| { |
| case PYMEM_DOMAIN_RAW: ptr2 = PyMem_RawRealloc(ptr, size2); break; |
| case PYMEM_DOMAIN_MEM: ptr2 = PyMem_Realloc(ptr, size2); break; |
| case PYMEM_DOMAIN_OBJ: ptr2 = PyObject_Realloc(ptr, size2); break; |
| default: ptr2 = NULL; break; |
| } |
| |
| if (ptr2 == NULL) { |
| error_msg = "realloc failed"; |
| goto fail; |
| } |
| CHECK_CTX("realloc"); |
| if (hook.realloc_ptr != ptr |
| || hook.realloc_new_size != size2) { |
| error_msg = "realloc invalid parameters"; |
| goto fail; |
| } |
| |
| switch(domain) |
| { |
| case PYMEM_DOMAIN_RAW: PyMem_RawFree(ptr2); break; |
| case PYMEM_DOMAIN_MEM: PyMem_Free(ptr2); break; |
| case PYMEM_DOMAIN_OBJ: PyObject_Free(ptr2); break; |
| } |
| |
| CHECK_CTX("free"); |
| if (hook.free_ptr != ptr2) { |
| error_msg = "free invalid pointer"; |
| goto fail; |
| } |
| |
| /* calloc, free */ |
| nelem = 2; |
| elsize = 5; |
| switch(domain) |
| { |
| case PYMEM_DOMAIN_RAW: ptr = PyMem_RawCalloc(nelem, elsize); break; |
| case PYMEM_DOMAIN_MEM: ptr = PyMem_Calloc(nelem, elsize); break; |
| case PYMEM_DOMAIN_OBJ: ptr = PyObject_Calloc(nelem, elsize); break; |
| default: ptr = NULL; break; |
| } |
| |
| if (ptr == NULL) { |
| error_msg = "calloc failed"; |
| goto fail; |
| } |
| CHECK_CTX("calloc"); |
| if (hook.calloc_nelem != nelem || hook.calloc_elsize != elsize) { |
| error_msg = "calloc invalid nelem or elsize"; |
| goto fail; |
| } |
| |
| hook.free_ptr = NULL; |
| switch(domain) |
| { |
| case PYMEM_DOMAIN_RAW: PyMem_RawFree(ptr); break; |
| case PYMEM_DOMAIN_MEM: PyMem_Free(ptr); break; |
| case PYMEM_DOMAIN_OBJ: PyObject_Free(ptr); break; |
| } |
| |
| CHECK_CTX("calloc free"); |
| if (hook.free_ptr != ptr) { |
| error_msg = "calloc free invalid pointer"; |
| goto fail; |
| } |
| |
| Py_INCREF(Py_None); |
| res = Py_None; |
| goto finally; |
| |
| fail: |
| PyErr_SetString(PyExc_RuntimeError, error_msg); |
| |
| finally: |
| PyMem_SetAllocator(domain, &hook.alloc); |
| return res; |
| |
| #undef CHECK_CTX |
| } |
| |
| static PyObject * |
| test_pymem_setrawallocators(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| return test_setallocators(PYMEM_DOMAIN_RAW); |
| } |
| |
| static PyObject * |
| test_pymem_setallocators(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| return test_setallocators(PYMEM_DOMAIN_MEM); |
| } |
| |
| static PyObject * |
| test_pyobject_setallocators(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| return test_setallocators(PYMEM_DOMAIN_OBJ); |
| } |
| |
| /* Most part of the following code is inherited from the pyfailmalloc project |
| * written by Victor Stinner. */ |
| static struct { |
| int installed; |
| PyMemAllocatorEx raw; |
| PyMemAllocatorEx mem; |
| PyMemAllocatorEx obj; |
| } FmHook; |
| |
| static struct { |
| int start; |
| int stop; |
| Py_ssize_t count; |
| } FmData; |
| |
| static int |
| fm_nomemory(void) |
| { |
| FmData.count++; |
| if (FmData.count > FmData.start && |
| (FmData.stop <= 0 || FmData.count <= FmData.stop)) { |
| return 1; |
| } |
| return 0; |
| } |
| |
| static void * |
| hook_fmalloc(void *ctx, size_t size) |
| { |
| PyMemAllocatorEx *alloc = (PyMemAllocatorEx *)ctx; |
| if (fm_nomemory()) { |
| return NULL; |
| } |
| return alloc->malloc(alloc->ctx, size); |
| } |
| |
| static void * |
| hook_fcalloc(void *ctx, size_t nelem, size_t elsize) |
| { |
| PyMemAllocatorEx *alloc = (PyMemAllocatorEx *)ctx; |
| if (fm_nomemory()) { |
| return NULL; |
| } |
| return alloc->calloc(alloc->ctx, nelem, elsize); |
| } |
| |
| static void * |
| hook_frealloc(void *ctx, void *ptr, size_t new_size) |
| { |
| PyMemAllocatorEx *alloc = (PyMemAllocatorEx *)ctx; |
| if (fm_nomemory()) { |
| return NULL; |
| } |
| return alloc->realloc(alloc->ctx, ptr, new_size); |
| } |
| |
| static void |
| hook_ffree(void *ctx, void *ptr) |
| { |
| PyMemAllocatorEx *alloc = (PyMemAllocatorEx *)ctx; |
| alloc->free(alloc->ctx, ptr); |
| } |
| |
| static void |
| fm_setup_hooks(void) |
| { |
| PyMemAllocatorEx alloc; |
| |
| if (FmHook.installed) { |
| return; |
| } |
| FmHook.installed = 1; |
| |
| alloc.malloc = hook_fmalloc; |
| alloc.calloc = hook_fcalloc; |
| alloc.realloc = hook_frealloc; |
| alloc.free = hook_ffree; |
| PyMem_GetAllocator(PYMEM_DOMAIN_RAW, &FmHook.raw); |
| PyMem_GetAllocator(PYMEM_DOMAIN_MEM, &FmHook.mem); |
| PyMem_GetAllocator(PYMEM_DOMAIN_OBJ, &FmHook.obj); |
| |
| alloc.ctx = &FmHook.raw; |
| PyMem_SetAllocator(PYMEM_DOMAIN_RAW, &alloc); |
| |
| alloc.ctx = &FmHook.mem; |
| PyMem_SetAllocator(PYMEM_DOMAIN_MEM, &alloc); |
| |
| alloc.ctx = &FmHook.obj; |
| PyMem_SetAllocator(PYMEM_DOMAIN_OBJ, &alloc); |
| } |
| |
| static void |
| fm_remove_hooks(void) |
| { |
| if (FmHook.installed) { |
| FmHook.installed = 0; |
| PyMem_SetAllocator(PYMEM_DOMAIN_RAW, &FmHook.raw); |
| PyMem_SetAllocator(PYMEM_DOMAIN_MEM, &FmHook.mem); |
| PyMem_SetAllocator(PYMEM_DOMAIN_OBJ, &FmHook.obj); |
| } |
| } |
| |
| static PyObject* |
| set_nomemory(PyObject *self, PyObject *args) |
| { |
| /* Memory allocation fails after 'start' allocation requests, and until |
| * 'stop' allocation requests except when 'stop' is negative or equal |
| * to 0 (default) in which case allocation failures never stop. */ |
| FmData.count = 0; |
| FmData.stop = 0; |
| if (!PyArg_ParseTuple(args, "i|i", &FmData.start, &FmData.stop)) { |
| return NULL; |
| } |
| fm_setup_hooks(); |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject* |
| remove_mem_hooks(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| fm_remove_hooks(); |
| Py_RETURN_NONE; |
| } |
| |
| PyDoc_STRVAR(docstring_empty, |
| "" |
| ); |
| |
| PyDoc_STRVAR(docstring_no_signature, |
| "This docstring has no signature." |
| ); |
| |
| PyDoc_STRVAR(docstring_with_invalid_signature, |
| "docstring_with_invalid_signature($module, /, boo)\n" |
| "\n" |
| "This docstring has an invalid signature." |
| ); |
| |
| PyDoc_STRVAR(docstring_with_invalid_signature2, |
| "docstring_with_invalid_signature2($module, /, boo)\n" |
| "\n" |
| "--\n" |
| "\n" |
| "This docstring also has an invalid signature." |
| ); |
| |
| PyDoc_STRVAR(docstring_with_signature, |
| "docstring_with_signature($module, /, sig)\n" |
| "--\n" |
| "\n" |
| "This docstring has a valid signature." |
| ); |
| |
| PyDoc_STRVAR(docstring_with_signature_but_no_doc, |
| "docstring_with_signature_but_no_doc($module, /, sig)\n" |
| "--\n" |
| "\n" |
| ); |
| |
| PyDoc_STRVAR(docstring_with_signature_and_extra_newlines, |
| "docstring_with_signature_and_extra_newlines($module, /, parameter)\n" |
| "--\n" |
| "\n" |
| "\n" |
| "This docstring has a valid signature and some extra newlines." |
| ); |
| |
| PyDoc_STRVAR(docstring_with_signature_with_defaults, |
| "docstring_with_signature_with_defaults(module, s='avocado',\n" |
| " b=b'bytes', d=3.14, i=35, n=None, t=True, f=False,\n" |
| " local=the_number_three, sys=sys.maxsize,\n" |
| " exp=sys.maxsize - 1)\n" |
| "--\n" |
| "\n" |
| "\n" |
| "\n" |
| "This docstring has a valid signature with parameters,\n" |
| "and the parameters take defaults of varying types." |
| ); |
| |
| typedef struct { |
| PyThread_type_lock start_event; |
| PyThread_type_lock exit_event; |
| PyObject *callback; |
| } test_c_thread_t; |
| |
| static void |
| temporary_c_thread(void *data) |
| { |
| test_c_thread_t *test_c_thread = data; |
| PyGILState_STATE state; |
| PyObject *res; |
| |
| PyThread_release_lock(test_c_thread->start_event); |
| |
| /* Allocate a Python thread state for this thread */ |
| state = PyGILState_Ensure(); |
| |
| res = _PyObject_CallNoArg(test_c_thread->callback); |
| Py_CLEAR(test_c_thread->callback); |
| |
| if (res == NULL) { |
| PyErr_Print(); |
| } |
| else { |
| Py_DECREF(res); |
| } |
| |
| /* Destroy the Python thread state for this thread */ |
| PyGILState_Release(state); |
| |
| PyThread_release_lock(test_c_thread->exit_event); |
| |
| PyThread_exit_thread(); |
| } |
| |
| static PyObject * |
| call_in_temporary_c_thread(PyObject *self, PyObject *callback) |
| { |
| PyObject *res = NULL; |
| test_c_thread_t test_c_thread; |
| long thread; |
| |
| PyEval_InitThreads(); |
| |
| test_c_thread.start_event = PyThread_allocate_lock(); |
| test_c_thread.exit_event = PyThread_allocate_lock(); |
| test_c_thread.callback = NULL; |
| if (!test_c_thread.start_event || !test_c_thread.exit_event) { |
| PyErr_SetString(PyExc_RuntimeError, "could not allocate lock"); |
| goto exit; |
| } |
| |
| Py_INCREF(callback); |
| test_c_thread.callback = callback; |
| |
| PyThread_acquire_lock(test_c_thread.start_event, 1); |
| PyThread_acquire_lock(test_c_thread.exit_event, 1); |
| |
| thread = PyThread_start_new_thread(temporary_c_thread, &test_c_thread); |
| if (thread == -1) { |
| PyErr_SetString(PyExc_RuntimeError, "unable to start the thread"); |
| PyThread_release_lock(test_c_thread.start_event); |
| PyThread_release_lock(test_c_thread.exit_event); |
| goto exit; |
| } |
| |
| PyThread_acquire_lock(test_c_thread.start_event, 1); |
| PyThread_release_lock(test_c_thread.start_event); |
| |
| Py_BEGIN_ALLOW_THREADS |
| PyThread_acquire_lock(test_c_thread.exit_event, 1); |
| PyThread_release_lock(test_c_thread.exit_event); |
| Py_END_ALLOW_THREADS |
| |
| Py_INCREF(Py_None); |
| res = Py_None; |
| |
| exit: |
| Py_CLEAR(test_c_thread.callback); |
| if (test_c_thread.start_event) |
| PyThread_free_lock(test_c_thread.start_event); |
| if (test_c_thread.exit_event) |
| PyThread_free_lock(test_c_thread.exit_event); |
| return res; |
| } |
| |
| static PyObject* |
| test_raise_signal(PyObject* self, PyObject *args) |
| { |
| int signum, err; |
| |
| if (!PyArg_ParseTuple(args, "i:raise_signal", &signum)) { |
| return NULL; |
| } |
| |
| err = raise(signum); |
| if (err) |
| return PyErr_SetFromErrno(PyExc_OSError); |
| |
| if (PyErr_CheckSignals() < 0) |
| return NULL; |
| |
| Py_RETURN_NONE; |
| } |
| |
| /* marshal */ |
| |
| static PyObject* |
| pymarshal_write_long_to_file(PyObject* self, PyObject *args) |
| { |
| long value; |
| char *filename; |
| int version; |
| FILE *fp; |
| |
| if (!PyArg_ParseTuple(args, "lsi:pymarshal_write_long_to_file", |
| &value, &filename, &version)) |
| return NULL; |
| |
| fp = fopen(filename, "wb"); |
| if (fp == NULL) { |
| PyErr_SetFromErrno(PyExc_OSError); |
| return NULL; |
| } |
| |
| PyMarshal_WriteLongToFile(value, fp, version); |
| |
| fclose(fp); |
| if (PyErr_Occurred()) |
| return NULL; |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject* |
| pymarshal_write_object_to_file(PyObject* self, PyObject *args) |
| { |
| PyObject *obj; |
| char *filename; |
| int version; |
| FILE *fp; |
| |
| if (!PyArg_ParseTuple(args, "Osi:pymarshal_write_object_to_file", |
| &obj, &filename, &version)) |
| return NULL; |
| |
| fp = fopen(filename, "wb"); |
| if (fp == NULL) { |
| PyErr_SetFromErrno(PyExc_OSError); |
| return NULL; |
| } |
| |
| PyMarshal_WriteObjectToFile(obj, fp, version); |
| |
| fclose(fp); |
| if (PyErr_Occurred()) |
| return NULL; |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject* |
| pymarshal_read_short_from_file(PyObject* self, PyObject *args) |
| { |
| int value; |
| long pos; |
| char *filename; |
| FILE *fp; |
| |
| if (!PyArg_ParseTuple(args, "s:pymarshal_read_short_from_file", &filename)) |
| return NULL; |
| |
| fp = fopen(filename, "rb"); |
| if (fp == NULL) { |
| PyErr_SetFromErrno(PyExc_OSError); |
| return NULL; |
| } |
| |
| value = PyMarshal_ReadShortFromFile(fp); |
| pos = ftell(fp); |
| |
| fclose(fp); |
| if (PyErr_Occurred()) |
| return NULL; |
| return Py_BuildValue("il", value, pos); |
| } |
| |
| static PyObject* |
| pymarshal_read_long_from_file(PyObject* self, PyObject *args) |
| { |
| long value, pos; |
| char *filename; |
| FILE *fp; |
| |
| if (!PyArg_ParseTuple(args, "s:pymarshal_read_long_from_file", &filename)) |
| return NULL; |
| |
| fp = fopen(filename, "rb"); |
| if (fp == NULL) { |
| PyErr_SetFromErrno(PyExc_OSError); |
| return NULL; |
| } |
| |
| value = PyMarshal_ReadLongFromFile(fp); |
| pos = ftell(fp); |
| |
| fclose(fp); |
| if (PyErr_Occurred()) |
| return NULL; |
| return Py_BuildValue("ll", value, pos); |
| } |
| |
| static PyObject* |
| pymarshal_read_last_object_from_file(PyObject* self, PyObject *args) |
| { |
| PyObject *obj; |
| long pos; |
| char *filename; |
| FILE *fp; |
| |
| if (!PyArg_ParseTuple(args, "s:pymarshal_read_last_object_from_file", &filename)) |
| return NULL; |
| |
| fp = fopen(filename, "rb"); |
| if (fp == NULL) { |
| PyErr_SetFromErrno(PyExc_OSError); |
| return NULL; |
| } |
| |
| obj = PyMarshal_ReadLastObjectFromFile(fp); |
| pos = ftell(fp); |
| |
| fclose(fp); |
| return Py_BuildValue("Nl", obj, pos); |
| } |
| |
| static PyObject* |
| pymarshal_read_object_from_file(PyObject* self, PyObject *args) |
| { |
| PyObject *obj; |
| long pos; |
| char *filename; |
| FILE *fp; |
| |
| if (!PyArg_ParseTuple(args, "s:pymarshal_read_object_from_file", &filename)) |
| return NULL; |
| |
| fp = fopen(filename, "rb"); |
| if (fp == NULL) { |
| PyErr_SetFromErrno(PyExc_OSError); |
| return NULL; |
| } |
| |
| obj = PyMarshal_ReadObjectFromFile(fp); |
| pos = ftell(fp); |
| |
| fclose(fp); |
| return Py_BuildValue("Nl", obj, pos); |
| } |
| |
| static PyObject* |
| return_null_without_error(PyObject *self, PyObject *args) |
| { |
| /* invalid call: return NULL without setting an error, |
| * _Py_CheckFunctionResult() must detect such bug at runtime. */ |
| PyErr_Clear(); |
| return NULL; |
| } |
| |
| static PyObject* |
| return_result_with_error(PyObject *self, PyObject *args) |
| { |
| /* invalid call: return a result with an error set, |
| * _Py_CheckFunctionResult() must detect such bug at runtime. */ |
| PyErr_SetNone(PyExc_ValueError); |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject * |
| test_pytime_fromseconds(PyObject *self, PyObject *args) |
| { |
| int seconds; |
| _PyTime_t ts; |
| |
| if (!PyArg_ParseTuple(args, "i", &seconds)) |
| return NULL; |
| ts = _PyTime_FromSeconds(seconds); |
| return _PyTime_AsNanosecondsObject(ts); |
| } |
| |
| static PyObject * |
| test_pytime_fromsecondsobject(PyObject *self, PyObject *args) |
| { |
| PyObject *obj; |
| int round; |
| _PyTime_t ts; |
| |
| if (!PyArg_ParseTuple(args, "Oi", &obj, &round)) |
| return NULL; |
| if (check_time_rounding(round) < 0) |
| return NULL; |
| if (_PyTime_FromSecondsObject(&ts, obj, round) == -1) |
| return NULL; |
| return _PyTime_AsNanosecondsObject(ts); |
| } |
| |
| static PyObject * |
| test_pytime_assecondsdouble(PyObject *self, PyObject *args) |
| { |
| PyObject *obj; |
| _PyTime_t ts; |
| double d; |
| |
| if (!PyArg_ParseTuple(args, "O", &obj)) { |
| return NULL; |
| } |
| if (_PyTime_FromNanosecondsObject(&ts, obj) < 0) { |
| return NULL; |
| } |
| d = _PyTime_AsSecondsDouble(ts); |
| return PyFloat_FromDouble(d); |
| } |
| |
| static PyObject * |
| test_PyTime_AsTimeval(PyObject *self, PyObject *args) |
| { |
| PyObject *obj; |
| int round; |
| _PyTime_t t; |
| struct timeval tv; |
| PyObject *seconds; |
| |
| if (!PyArg_ParseTuple(args, "Oi", &obj, &round)) |
| return NULL; |
| if (check_time_rounding(round) < 0) { |
| return NULL; |
| } |
| if (_PyTime_FromNanosecondsObject(&t, obj) < 0) { |
| return NULL; |
| } |
| if (_PyTime_AsTimeval(t, &tv, round) < 0) { |
| return NULL; |
| } |
| |
| seconds = PyLong_FromLongLong(tv.tv_sec); |
| if (seconds == NULL) { |
| return NULL; |
| } |
| return Py_BuildValue("Nl", seconds, tv.tv_usec); |
| } |
| |
| #ifdef HAVE_CLOCK_GETTIME |
| static PyObject * |
| test_PyTime_AsTimespec(PyObject *self, PyObject *args) |
| { |
| PyObject *obj; |
| _PyTime_t t; |
| struct timespec ts; |
| |
| if (!PyArg_ParseTuple(args, "O", &obj)) { |
| return NULL; |
| } |
| if (_PyTime_FromNanosecondsObject(&t, obj) < 0) { |
| return NULL; |
| } |
| if (_PyTime_AsTimespec(t, &ts) == -1) { |
| return NULL; |
| } |
| return Py_BuildValue("Nl", _PyLong_FromTime_t(ts.tv_sec), ts.tv_nsec); |
| } |
| #endif |
| |
| static PyObject * |
| test_PyTime_AsMilliseconds(PyObject *self, PyObject *args) |
| { |
| PyObject *obj; |
| int round; |
| _PyTime_t t, ms; |
| |
| if (!PyArg_ParseTuple(args, "Oi", &obj, &round)) { |
| return NULL; |
| } |
| if (_PyTime_FromNanosecondsObject(&t, obj) < 0) { |
| return NULL; |
| } |
| if (check_time_rounding(round) < 0) { |
| return NULL; |
| } |
| ms = _PyTime_AsMilliseconds(t, round); |
| /* This conversion rely on the fact that _PyTime_t is a number of |
| nanoseconds */ |
| return _PyTime_AsNanosecondsObject(ms); |
| } |
| |
| static PyObject * |
| test_PyTime_AsMicroseconds(PyObject *self, PyObject *args) |
| { |
| PyObject *obj; |
| int round; |
| _PyTime_t t, ms; |
| |
| if (!PyArg_ParseTuple(args, "Oi", &obj, &round)) |
| return NULL; |
| if (_PyTime_FromNanosecondsObject(&t, obj) < 0) { |
| return NULL; |
| } |
| if (check_time_rounding(round) < 0) { |
| return NULL; |
| } |
| ms = _PyTime_AsMicroseconds(t, round); |
| /* This conversion rely on the fact that _PyTime_t is a number of |
| nanoseconds */ |
| return _PyTime_AsNanosecondsObject(ms); |
| } |
| |
| static PyObject* |
| get_recursion_depth(PyObject *self, PyObject *args) |
| { |
| PyThreadState *tstate = PyThreadState_GET(); |
| |
| /* subtract one to ignore the frame of the get_recursion_depth() call */ |
| return PyLong_FromLong(tstate->recursion_depth - 1); |
| } |
| |
| static PyObject* |
| pymem_buffer_overflow(PyObject *self, PyObject *args) |
| { |
| char *buffer; |
| |
| /* Deliberate buffer overflow to check that PyMem_Free() detects |
| the overflow when debug hooks are installed. */ |
| buffer = PyMem_Malloc(16); |
| buffer[16] = 'x'; |
| PyMem_Free(buffer); |
| |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject* |
| pymem_api_misuse(PyObject *self, PyObject *args) |
| { |
| char *buffer; |
| |
| /* Deliberate misusage of Python allocators: |
| allococate with PyMem but release with PyMem_Raw. */ |
| buffer = PyMem_Malloc(16); |
| PyMem_RawFree(buffer); |
| |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject* |
| pymem_malloc_without_gil(PyObject *self, PyObject *args) |
| { |
| char *buffer; |
| |
| /* Deliberate bug to test debug hooks on Python memory allocators: |
| call PyMem_Malloc() without holding the GIL */ |
| Py_BEGIN_ALLOW_THREADS |
| buffer = PyMem_Malloc(10); |
| Py_END_ALLOW_THREADS |
| |
| PyMem_Free(buffer); |
| |
| Py_RETURN_NONE; |
| } |
| |
| |
| static PyObject* |
| test_pymem_getallocatorsname(PyObject *self, PyObject *args) |
| { |
| const char *name = _PyMem_GetAllocatorsName(); |
| if (name == NULL) { |
| PyErr_SetString(PyExc_RuntimeError, "cannot get allocators name"); |
| return NULL; |
| } |
| return PyUnicode_FromString(name); |
| } |
| |
| |
| static PyObject* |
| pyobject_malloc_without_gil(PyObject *self, PyObject *args) |
| { |
| char *buffer; |
| |
| /* Deliberate bug to test debug hooks on Python memory allocators: |
| call PyObject_Malloc() without holding the GIL */ |
| Py_BEGIN_ALLOW_THREADS |
| buffer = PyObject_Malloc(10); |
| Py_END_ALLOW_THREADS |
| |
| PyObject_Free(buffer); |
| |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject * |
| tracemalloc_track(PyObject *self, PyObject *args) |
| { |
| unsigned int domain; |
| PyObject *ptr_obj; |
| void *ptr; |
| Py_ssize_t size; |
| int release_gil = 0; |
| int res; |
| |
| if (!PyArg_ParseTuple(args, "IOn|i", &domain, &ptr_obj, &size, &release_gil)) |
| return NULL; |
| ptr = PyLong_AsVoidPtr(ptr_obj); |
| if (PyErr_Occurred()) |
| return NULL; |
| |
| if (release_gil) { |
| Py_BEGIN_ALLOW_THREADS |
| res = PyTraceMalloc_Track(domain, (uintptr_t)ptr, size); |
| Py_END_ALLOW_THREADS |
| } |
| else { |
| res = PyTraceMalloc_Track(domain, (uintptr_t)ptr, size); |
| } |
| |
| if (res < 0) { |
| PyErr_SetString(PyExc_RuntimeError, "PyTraceMalloc_Track error"); |
| return NULL; |
| } |
| |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject * |
| tracemalloc_untrack(PyObject *self, PyObject *args) |
| { |
| unsigned int domain; |
| PyObject *ptr_obj; |
| void *ptr; |
| int res; |
| |
| if (!PyArg_ParseTuple(args, "IO", &domain, &ptr_obj)) |
| return NULL; |
| ptr = PyLong_AsVoidPtr(ptr_obj); |
| if (PyErr_Occurred()) |
| return NULL; |
| |
| res = PyTraceMalloc_Untrack(domain, (uintptr_t)ptr); |
| if (res < 0) { |
| PyErr_SetString(PyExc_RuntimeError, "PyTraceMalloc_Untrack error"); |
| return NULL; |
| } |
| |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject * |
| tracemalloc_get_traceback(PyObject *self, PyObject *args) |
| { |
| unsigned int domain; |
| PyObject *ptr_obj; |
| void *ptr; |
| |
| if (!PyArg_ParseTuple(args, "IO", &domain, &ptr_obj)) |
| return NULL; |
| ptr = PyLong_AsVoidPtr(ptr_obj); |
| if (PyErr_Occurred()) |
| return NULL; |
| |
| return _PyTraceMalloc_GetTraceback(domain, (uintptr_t)ptr); |
| } |
| |
| static PyObject * |
| dict_get_version(PyObject *self, PyObject *args) |
| { |
| PyDictObject *dict; |
| uint64_t version; |
| |
| if (!PyArg_ParseTuple(args, "O!", &PyDict_Type, &dict)) |
| return NULL; |
| |
| version = dict->ma_version_tag; |
| |
| Py_BUILD_ASSERT(sizeof(unsigned PY_LONG_LONG) >= sizeof(version)); |
| return PyLong_FromUnsignedLongLong((unsigned PY_LONG_LONG)version); |
| } |
| |
| |
| static PyObject * |
| raise_SIGINT_then_send_None(PyObject *self, PyObject *args) |
| { |
| PyGenObject *gen; |
| |
| if (!PyArg_ParseTuple(args, "O!", &PyGen_Type, &gen)) |
| return NULL; |
| |
| /* This is used in a test to check what happens if a signal arrives just |
| as we're in the process of entering a yield from chain (see |
| bpo-30039). |
| |
| Needs to be done in C, because: |
| - we don't have a Python wrapper for raise() |
| - we need to make sure that the Python-level signal handler doesn't run |
| *before* we enter the generator frame, which is impossible in Python |
| because we check for signals before every bytecode operation. |
| */ |
| raise(SIGINT); |
| return _PyGen_Send(gen, Py_None); |
| } |
| |
| |
| static int |
| fastcall_args(PyObject *args, PyObject ***stack, Py_ssize_t *nargs) |
| { |
| if (args == Py_None) { |
| *stack = NULL; |
| *nargs = 0; |
| } |
| else if (PyTuple_Check(args)) { |
| *stack = &PyTuple_GET_ITEM(args, 0); |
| *nargs = PyTuple_GET_SIZE(args); |
| } |
| else { |
| PyErr_SetString(PyExc_TypeError, "args must be None or a tuple"); |
| return -1; |
| } |
| return 0; |
| } |
| |
| |
| static PyObject * |
| test_pyobject_fastcall(PyObject *self, PyObject *args) |
| { |
| PyObject *func, *func_args; |
| PyObject **stack; |
| Py_ssize_t nargs; |
| |
| if (!PyArg_ParseTuple(args, "OO", &func, &func_args)) { |
| return NULL; |
| } |
| |
| if (fastcall_args(func_args, &stack, &nargs) < 0) { |
| return NULL; |
| } |
| return _PyObject_FastCall(func, stack, nargs); |
| } |
| |
| |
| static PyObject * |
| test_pyobject_fastcalldict(PyObject *self, PyObject *args) |
| { |
| PyObject *func, *func_args, *kwargs; |
| PyObject **stack; |
| Py_ssize_t nargs; |
| |
| if (!PyArg_ParseTuple(args, "OOO", &func, &func_args, &kwargs)) { |
| return NULL; |
| } |
| |
| if (fastcall_args(func_args, &stack, &nargs) < 0) { |
| return NULL; |
| } |
| |
| if (kwargs == Py_None) { |
| kwargs = NULL; |
| } |
| else if (!PyDict_Check(kwargs)) { |
| PyErr_SetString(PyExc_TypeError, "kwnames must be None or a dict"); |
| return NULL; |
| } |
| |
| return _PyObject_FastCallDict(func, stack, nargs, kwargs); |
| } |
| |
| |
| static PyObject * |
| test_pyobject_fastcallkeywords(PyObject *self, PyObject *args) |
| { |
| PyObject *func, *func_args, *kwnames = NULL; |
| PyObject **stack; |
| Py_ssize_t nargs, nkw; |
| |
| if (!PyArg_ParseTuple(args, "OOO", &func, &func_args, &kwnames)) { |
| return NULL; |
| } |
| |
| if (fastcall_args(func_args, &stack, &nargs) < 0) { |
| return NULL; |
| } |
| |
| if (kwnames == Py_None) { |
| kwnames = NULL; |
| } |
| else if (PyTuple_Check(kwnames)) { |
| nkw = PyTuple_GET_SIZE(kwnames); |
| if (nargs < nkw) { |
| PyErr_SetString(PyExc_ValueError, "kwnames longer than args"); |
| return NULL; |
| } |
| nargs -= nkw; |
| } |
| else { |
| PyErr_SetString(PyExc_TypeError, "kwnames must be None or a tuple"); |
| return NULL; |
| } |
| return _PyObject_FastCallKeywords(func, stack, nargs, kwnames); |
| } |
| |
| |
| static PyObject* |
| stack_pointer(PyObject *self, PyObject *args) |
| { |
| int v = 5; |
| return PyLong_FromVoidPtr(&v); |
| } |
| |
| |
| #ifdef W_STOPCODE |
| static PyObject* |
| py_w_stopcode(PyObject *self, PyObject *args) |
| { |
| int sig, status; |
| if (!PyArg_ParseTuple(args, "i", &sig)) { |
| return NULL; |
| } |
| status = W_STOPCODE(sig); |
| return PyLong_FromLong(status); |
| } |
| #endif |
| |
| |
| static PyObject * |
| get_mapping_keys(PyObject* self, PyObject *obj) |
| { |
| return PyMapping_Keys(obj); |
| } |
| |
| static PyObject * |
| get_mapping_values(PyObject* self, PyObject *obj) |
| { |
| return PyMapping_Values(obj); |
| } |
| |
| static PyObject * |
| get_mapping_items(PyObject* self, PyObject *obj) |
| { |
| return PyMapping_Items(obj); |
| } |
| |
| |
| static PyObject * |
| test_pythread_tss_key_state(PyObject *self, PyObject *args) |
| { |
| Py_tss_t tss_key = Py_tss_NEEDS_INIT; |
| if (PyThread_tss_is_created(&tss_key)) { |
| return raiseTestError("test_pythread_tss_key_state", |
| "TSS key not in an uninitialized state at " |
| "creation time"); |
| } |
| if (PyThread_tss_create(&tss_key) != 0) { |
| PyErr_SetString(PyExc_RuntimeError, "PyThread_tss_create failed"); |
| return NULL; |
| } |
| if (!PyThread_tss_is_created(&tss_key)) { |
| return raiseTestError("test_pythread_tss_key_state", |
| "PyThread_tss_create succeeded, " |
| "but with TSS key in an uninitialized state"); |
| } |
| if (PyThread_tss_create(&tss_key) != 0) { |
| return raiseTestError("test_pythread_tss_key_state", |
| "PyThread_tss_create unsuccessful with " |
| "an already initialized key"); |
| } |
| #define CHECK_TSS_API(expr) \ |
| (void)(expr); \ |
| if (!PyThread_tss_is_created(&tss_key)) { \ |
| return raiseTestError("test_pythread_tss_key_state", \ |
| "TSS key initialization state was not " \ |
| "preserved after calling " #expr); } |
| CHECK_TSS_API(PyThread_tss_set(&tss_key, NULL)); |
| CHECK_TSS_API(PyThread_tss_get(&tss_key)); |
| #undef CHECK_TSS_API |
| PyThread_tss_delete(&tss_key); |
| if (PyThread_tss_is_created(&tss_key)) { |
| return raiseTestError("test_pythread_tss_key_state", |
| "PyThread_tss_delete called, but did not " |
| "set the key state to uninitialized"); |
| } |
| |
| Py_tss_t *ptr_key = PyThread_tss_alloc(); |
| if (ptr_key == NULL) { |
| PyErr_SetString(PyExc_RuntimeError, "PyThread_tss_alloc failed"); |
| return NULL; |
| } |
| if (PyThread_tss_is_created(ptr_key)) { |
| return raiseTestError("test_pythread_tss_key_state", |
| "TSS key not in an uninitialized state at " |
| "allocation time"); |
| } |
| PyThread_tss_free(ptr_key); |
| ptr_key = NULL; |
| Py_RETURN_NONE; |
| } |
| |
| |
| static PyObject* |
| new_hamt(PyObject *self, PyObject *args) |
| { |
| return _PyContext_NewHamtForTests(); |
| } |
| |
| |
| /* def bad_get(self, obj, cls): |
| cls() |
| return repr(self) |
| */ |
| static PyObject* |
| bad_get(PyObject *module, PyObject *const *args, Py_ssize_t nargs) |
| { |
| if (nargs != 3) { |
| PyErr_SetString(PyExc_TypeError, "bad_get requires exactly 3 arguments"); |
| return NULL; |
| } |
| |
| PyObject *res = PyObject_CallObject(args[2], NULL); |
| if (res == NULL) { |
| return NULL; |
| } |
| Py_DECREF(res); |
| |
| return PyObject_Repr(args[0]); |
| } |
| |
| |
| static PyObject * |
| encode_locale_ex(PyObject *self, PyObject *args) |
| { |
| PyObject *unicode; |
| int current_locale = 0; |
| wchar_t *wstr; |
| PyObject *res = NULL; |
| const char *errors = NULL; |
| |
| if (!PyArg_ParseTuple(args, "U|is", &unicode, ¤t_locale, &errors)) { |
| return NULL; |
| } |
| wstr = PyUnicode_AsWideCharString(unicode, NULL); |
| if (wstr == NULL) { |
| return NULL; |
| } |
| _Py_error_handler error_handler = _Py_GetErrorHandler(errors); |
| |
| char *str = NULL; |
| size_t error_pos; |
| const char *reason = NULL; |
| int ret = _Py_EncodeLocaleEx(wstr, |
| &str, &error_pos, &reason, |
| current_locale, error_handler); |
| PyMem_Free(wstr); |
| |
| switch(ret) { |
| case 0: |
| res = PyBytes_FromString(str); |
| PyMem_RawFree(str); |
| break; |
| case -1: |
| PyErr_NoMemory(); |
| break; |
| case -2: |
| PyErr_Format(PyExc_RuntimeError, "encode error: pos=%zu, reason=%s", |
| error_pos, reason); |
| break; |
| case -3: |
| PyErr_SetString(PyExc_ValueError, "unsupported error handler"); |
| break; |
| default: |
| PyErr_SetString(PyExc_ValueError, "unknow error code"); |
| break; |
| } |
| return res; |
| } |
| |
| |
| static PyObject * |
| decode_locale_ex(PyObject *self, PyObject *args) |
| { |
| char *str; |
| int current_locale = 0; |
| PyObject *res = NULL; |
| const char *errors = NULL; |
| |
| if (!PyArg_ParseTuple(args, "y|is", &str, ¤t_locale, &errors)) { |
| return NULL; |
| } |
| _Py_error_handler error_handler = _Py_GetErrorHandler(errors); |
| |
| wchar_t *wstr = NULL; |
| size_t wlen = 0; |
| const char *reason = NULL; |
| int ret = _Py_DecodeLocaleEx(str, |
| &wstr, &wlen, &reason, |
| current_locale, error_handler); |
| |
| switch(ret) { |
| case 0: |
| res = PyUnicode_FromWideChar(wstr, wlen); |
| PyMem_RawFree(wstr); |
| break; |
| case -1: |
| PyErr_NoMemory(); |
| break; |
| case -2: |
| PyErr_Format(PyExc_RuntimeError, "decode error: pos=%zu, reason=%s", |
| wlen, reason); |
| break; |
| case -3: |
| PyErr_SetString(PyExc_ValueError, "unsupported error handler"); |
| break; |
| default: |
| PyErr_SetString(PyExc_ValueError, "unknow error code"); |
| break; |
| } |
| return res; |
| } |
| |
| |
| static PyObject * |
| get_coreconfig(PyObject *self, PyObject *Py_UNUSED(args)) |
| { |
| PyInterpreterState *interp = _PyInterpreterState_Get(); |
| const _PyCoreConfig *config = &interp->core_config; |
| PyObject *dict, *obj; |
| |
| dict = PyDict_New(); |
| if (dict == NULL) { |
| return NULL; |
| } |
| |
| #define FROM_STRING(STR) \ |
| ((STR != NULL) ? \ |
| PyUnicode_FromString(STR) \ |
| : (Py_INCREF(Py_None), Py_None)) |
| #define FROM_WSTRING(STR) \ |
| ((STR != NULL) ? \ |
| PyUnicode_FromWideChar(STR, -1) \ |
| : (Py_INCREF(Py_None), Py_None)) |
| #define SET_ITEM(KEY, EXPR) \ |
| do { \ |
| obj = (EXPR); \ |
| if (obj == NULL) { \ |
| return NULL; \ |
| } \ |
| int res = PyDict_SetItemString(dict, (KEY), obj); \ |
| Py_DECREF(obj); \ |
| if (res < 0) { \ |
| goto fail; \ |
| } \ |
| } while (0) |
| |
| SET_ITEM("install_signal_handlers", |
| PyLong_FromLong(config->install_signal_handlers)); |
| SET_ITEM("use_environment", |
| PyLong_FromLong(config->use_environment)); |
| SET_ITEM("use_hash_seed", |
| PyLong_FromLong(config->use_hash_seed)); |
| SET_ITEM("hash_seed", |
| PyLong_FromUnsignedLong(config->hash_seed)); |
| SET_ITEM("allocator", |
| FROM_STRING(config->allocator)); |
| SET_ITEM("dev_mode", |
| PyLong_FromLong(config->dev_mode)); |
| SET_ITEM("faulthandler", |
| PyLong_FromLong(config->faulthandler)); |
| SET_ITEM("tracemalloc", |
| PyLong_FromLong(config->tracemalloc)); |
| SET_ITEM("import_time", |
| PyLong_FromLong(config->import_time)); |
| SET_ITEM("show_ref_count", |
| PyLong_FromLong(config->show_ref_count)); |
| SET_ITEM("show_alloc_count", |
| PyLong_FromLong(config->show_alloc_count)); |
| SET_ITEM("dump_refs", |
| PyLong_FromLong(config->dump_refs)); |
| SET_ITEM("malloc_stats", |
| PyLong_FromLong(config->malloc_stats)); |
| SET_ITEM("coerce_c_locale", |
| PyLong_FromLong(config->coerce_c_locale)); |
| SET_ITEM("coerce_c_locale_warn", |
| PyLong_FromLong(config->coerce_c_locale_warn)); |
| SET_ITEM("filesystem_encoding", |
| FROM_STRING(config->filesystem_encoding)); |
| SET_ITEM("filesystem_errors", |
| FROM_STRING(config->filesystem_errors)); |
| SET_ITEM("stdio_encoding", |
| FROM_STRING(config->stdio_encoding)); |
| SET_ITEM("utf8_mode", |
| PyLong_FromLong(config->utf8_mode)); |
| SET_ITEM("pycache_prefix", |
| FROM_WSTRING(config->pycache_prefix)); |
| SET_ITEM("program_name", |
| FROM_WSTRING(config->program_name)); |
| SET_ITEM("argv", |
| _Py_wstrlist_as_pylist(config->argc, config->argv)); |
| SET_ITEM("program", |
| FROM_WSTRING(config->program)); |
| SET_ITEM("warnoptions", |
| _Py_wstrlist_as_pylist(config->nwarnoption, config->warnoptions)); |
| SET_ITEM("module_search_path_env", |
| FROM_WSTRING(config->module_search_path_env)); |
| SET_ITEM("home", |
| FROM_WSTRING(config->home)); |
| SET_ITEM("module_search_paths", |
| _Py_wstrlist_as_pylist(config->nmodule_search_path, config->module_search_paths)); |
| SET_ITEM("executable", |
| FROM_WSTRING(config->executable)); |
| SET_ITEM("prefix", |
| FROM_WSTRING(config->prefix)); |
| SET_ITEM("base_prefix", |
| FROM_WSTRING(config->base_prefix)); |
| SET_ITEM("exec_prefix", |
| FROM_WSTRING(config->exec_prefix)); |
| SET_ITEM("base_exec_prefix", |
| FROM_WSTRING(config->base_exec_prefix)); |
| #ifdef MS_WINDOWS |
| SET_ITEM("dll_path", |
| FROM_WSTRING(config->dll_path)); |
| #endif |
| SET_ITEM("isolated", |
| PyLong_FromLong(config->isolated)); |
| SET_ITEM("site_import", |
| PyLong_FromLong(config->site_import)); |
| SET_ITEM("bytes_warning", |
| PyLong_FromLong(config->bytes_warning)); |
| SET_ITEM("inspect", |
| PyLong_FromLong(config->inspect)); |
| SET_ITEM("interactive", |
| PyLong_FromLong(config->interactive)); |
| SET_ITEM("optimization_level", |
| PyLong_FromLong(config->optimization_level)); |
| SET_ITEM("parser_debug", |
| PyLong_FromLong(config->parser_debug)); |
| SET_ITEM("write_bytecode", |
| PyLong_FromLong(config->write_bytecode)); |
| SET_ITEM("verbose", |
| PyLong_FromLong(config->verbose)); |
| SET_ITEM("quiet", |
| PyLong_FromLong(config->quiet)); |
| SET_ITEM("user_site_directory", |
| PyLong_FromLong(config->user_site_directory)); |
| SET_ITEM("buffered_stdio", |
| PyLong_FromLong(config->buffered_stdio)); |
| SET_ITEM("stdio_encoding", |
| FROM_STRING(config->stdio_encoding)); |
| SET_ITEM("stdio_errors", |
| FROM_STRING(config->stdio_errors)); |
| #ifdef MS_WINDOWS |
| SET_ITEM("legacy_windows_fs_encoding", |
| PyLong_FromLong(config->legacy_windows_fs_encoding)); |
| SET_ITEM("legacy_windows_stdio", |
| PyLong_FromLong(config->legacy_windows_stdio)); |
| #endif |
| SET_ITEM("_install_importlib", |
| PyLong_FromLong(config->_install_importlib)); |
| SET_ITEM("_check_hash_pycs_mode", |
| FROM_STRING(config->_check_hash_pycs_mode)); |
| SET_ITEM("_frozen", |
| PyLong_FromLong(config->_frozen)); |
| |
| return dict; |
| |
| fail: |
| Py_DECREF(dict); |
| return NULL; |
| |
| #undef FROM_STRING |
| #undef FROM_WSTRING |
| #undef SET_ITEM |
| } |
| |
| |
| #ifdef Py_REF_DEBUG |
| static PyObject * |
| negative_refcount(PyObject *self, PyObject *Py_UNUSED(args)) |
| { |
| PyObject *obj = PyUnicode_FromString("negative_refcount"); |
| if (obj == NULL) { |
| return NULL; |
| } |
| assert(Py_REFCNT(obj) == 1); |
| |
| Py_REFCNT(obj) = 0; |
| /* Py_DECREF() must call _Py_NegativeRefcount() and abort Python */ |
| Py_DECREF(obj); |
| |
| Py_RETURN_NONE; |
| } |
| #endif |
| |
| |
| static PyMethodDef TestMethods[] = { |
| {"raise_exception", raise_exception, METH_VARARGS}, |
| {"raise_memoryerror", raise_memoryerror, METH_NOARGS}, |
| {"set_errno", set_errno, METH_VARARGS}, |
| {"test_config", test_config, METH_NOARGS}, |
| {"test_sizeof_c_types", test_sizeof_c_types, METH_NOARGS}, |
| {"test_datetime_capi", test_datetime_capi, METH_NOARGS}, |
| {"datetime_check_date", datetime_check_date, METH_VARARGS}, |
| {"datetime_check_time", datetime_check_time, METH_VARARGS}, |
| {"datetime_check_datetime", datetime_check_datetime, METH_VARARGS}, |
| {"datetime_check_delta", datetime_check_delta, METH_VARARGS}, |
| {"datetime_check_tzinfo", datetime_check_tzinfo, METH_VARARGS}, |
| {"make_timezones_capi", make_timezones_capi, METH_NOARGS}, |
| {"get_timezones_offset_zero", get_timezones_offset_zero, METH_NOARGS}, |
| {"get_timezone_utc_capi", get_timezone_utc_capi, METH_VARARGS}, |
| {"test_list_api", test_list_api, METH_NOARGS}, |
| {"test_dict_iteration", test_dict_iteration, METH_NOARGS}, |
| {"dict_getitem_knownhash", dict_getitem_knownhash, METH_VARARGS}, |
| {"dict_hassplittable", dict_hassplittable, METH_O}, |
| {"test_lazy_hash_inheritance", test_lazy_hash_inheritance,METH_NOARGS}, |
| {"test_long_api", test_long_api, METH_NOARGS}, |
| {"test_xincref_doesnt_leak",test_xincref_doesnt_leak, METH_NOARGS}, |
| {"test_incref_doesnt_leak", test_incref_doesnt_leak, METH_NOARGS}, |
| {"test_xdecref_doesnt_leak",test_xdecref_doesnt_leak, METH_NOARGS}, |
| {"test_decref_doesnt_leak", test_decref_doesnt_leak, METH_NOARGS}, |
| {"test_incref_decref_API", test_incref_decref_API, METH_NOARGS}, |
| {"test_long_and_overflow", test_long_and_overflow, METH_NOARGS}, |
| {"test_long_as_double", test_long_as_double, METH_NOARGS}, |
| {"test_long_as_size_t", test_long_as_size_t, METH_NOARGS}, |
| {"test_long_numbits", test_long_numbits, METH_NOARGS}, |
| {"test_k_code", test_k_code, METH_NOARGS}, |
| {"test_empty_argparse", test_empty_argparse, METH_NOARGS}, |
| {"parse_tuple_and_keywords", parse_tuple_and_keywords, METH_VARARGS}, |
| {"test_null_strings", test_null_strings, METH_NOARGS}, |
| {"test_string_from_format", (PyCFunction)test_string_from_format, METH_NOARGS}, |
| {"test_with_docstring", test_with_docstring, METH_NOARGS, |
| PyDoc_STR("This is a pretty normal docstring.")}, |
| {"test_string_to_double", test_string_to_double, METH_NOARGS}, |
| {"test_unicode_compare_with_ascii", test_unicode_compare_with_ascii, |
| METH_NOARGS}, |
| {"test_capsule", (PyCFunction)test_capsule, METH_NOARGS}, |
| {"test_from_contiguous", (PyCFunction)test_from_contiguous, METH_NOARGS}, |
| #if (defined(__linux__) || defined(__FreeBSD__)) && defined(__GNUC__) |
| {"test_pep3118_obsolete_write_locks", (PyCFunction)test_pep3118_obsolete_write_locks, METH_NOARGS}, |
| #endif |
| {"getbuffer_with_null_view", getbuffer_with_null_view, METH_O}, |
| {"test_buildvalue_N", test_buildvalue_N, METH_NOARGS}, |
| {"get_args", get_args, METH_VARARGS}, |
| {"get_kwargs", (PyCFunction)get_kwargs, METH_VARARGS|METH_KEYWORDS}, |
| {"getargs_tuple", getargs_tuple, METH_VARARGS}, |
| {"getargs_keywords", (PyCFunction)getargs_keywords, |
| METH_VARARGS|METH_KEYWORDS}, |
| {"getargs_keyword_only", (PyCFunction)getargs_keyword_only, |
| METH_VARARGS|METH_KEYWORDS}, |
| {"getargs_positional_only_and_keywords", |
| (PyCFunction)getargs_positional_only_and_keywords, |
| METH_VARARGS|METH_KEYWORDS}, |
| {"getargs_b", getargs_b, METH_VARARGS}, |
| {"getargs_B", getargs_B, METH_VARARGS}, |
| {"getargs_h", getargs_h, METH_VARARGS}, |
| {"getargs_H", getargs_H, METH_VARARGS}, |
| {"getargs_I", getargs_I, METH_VARARGS}, |
| {"getargs_k", getargs_k, METH_VARARGS}, |
| {"getargs_i", getargs_i, METH_VARARGS}, |
| {"getargs_l", getargs_l, METH_VARARGS}, |
| {"getargs_n", getargs_n, METH_VARARGS}, |
| {"getargs_p", getargs_p, METH_VARARGS}, |
| {"getargs_L", getargs_L, METH_VARARGS}, |
| {"getargs_K", getargs_K, METH_VARARGS}, |
| {"test_longlong_api", test_longlong_api, METH_NOARGS}, |
| {"test_long_long_and_overflow",test_long_long_and_overflow, METH_NOARGS}, |
| {"test_L_code", test_L_code, METH_NOARGS}, |
| {"getargs_f", getargs_f, METH_VARARGS}, |
| {"getargs_d", getargs_d, METH_VARARGS}, |
| {"getargs_D", getargs_D, METH_VARARGS}, |
| {"getargs_S", getargs_S, METH_VARARGS}, |
| {"getargs_Y", getargs_Y, METH_VARARGS}, |
| {"getargs_U", getargs_U, METH_VARARGS}, |
| {"getargs_c", getargs_c, METH_VARARGS}, |
| {"getargs_C", getargs_C, METH_VARARGS}, |
| {"getargs_s", getargs_s, METH_VARARGS}, |
| {"getargs_s_star", getargs_s_star, METH_VARARGS}, |
| {"getargs_s_hash", getargs_s_hash, METH_VARARGS}, |
| {"getargs_z", getargs_z, METH_VARARGS}, |
| {"getargs_z_star", getargs_z_star, METH_VARARGS}, |
| {"getargs_z_hash", getargs_z_hash, METH_VARARGS}, |
| {"getargs_y", getargs_y, METH_VARARGS}, |
| {"getargs_y_star", getargs_y_star, METH_VARARGS}, |
| {"getargs_y_hash", getargs_y_hash, METH_VARARGS}, |
| {"getargs_u", getargs_u, METH_VARARGS}, |
| {"getargs_u_hash", getargs_u_hash, METH_VARARGS}, |
| {"getargs_Z", getargs_Z, METH_VARARGS}, |
| {"getargs_Z_hash", getargs_Z_hash, METH_VARARGS}, |
| {"getargs_w_star", getargs_w_star, METH_VARARGS}, |
| {"getargs_es", getargs_es, METH_VARARGS}, |
| {"getargs_et", getargs_et, METH_VARARGS}, |
| {"getargs_es_hash", getargs_es_hash, METH_VARARGS}, |
| {"getargs_et_hash", getargs_et_hash, METH_VARARGS}, |
| {"codec_incrementalencoder", |
| (PyCFunction)codec_incrementalencoder, METH_VARARGS}, |
| {"codec_incrementaldecoder", |
| (PyCFunction)codec_incrementaldecoder, METH_VARARGS}, |
| {"test_s_code", test_s_code, METH_NOARGS}, |
| {"test_u_code", test_u_code, METH_NOARGS}, |
| {"test_Z_code", test_Z_code, METH_NOARGS}, |
| {"test_widechar", test_widechar, METH_NOARGS}, |
| {"unicode_aswidechar", unicode_aswidechar, METH_VARARGS}, |
| {"unicode_aswidecharstring",unicode_aswidecharstring, METH_VARARGS}, |
| {"unicode_asucs4", unicode_asucs4, METH_VARARGS}, |
| {"unicode_findchar", unicode_findchar, METH_VARARGS}, |
| {"unicode_copycharacters", unicode_copycharacters, METH_VARARGS}, |
| {"unicode_encodedecimal", unicode_encodedecimal, METH_VARARGS}, |
| {"unicode_transformdecimaltoascii", unicode_transformdecimaltoascii, METH_VARARGS}, |
| {"unicode_legacy_string", unicode_legacy_string, METH_VARARGS}, |
| {"_test_thread_state", test_thread_state, METH_VARARGS}, |
| {"_pending_threadfunc", pending_threadfunc, METH_VARARGS}, |
| #ifdef HAVE_GETTIMEOFDAY |
| {"profile_int", profile_int, METH_NOARGS}, |
| #endif |
| {"traceback_print", traceback_print, METH_VARARGS}, |
| {"exception_print", exception_print, METH_VARARGS}, |
| {"set_exc_info", test_set_exc_info, METH_VARARGS}, |
| {"argparsing", argparsing, METH_VARARGS}, |
| {"code_newempty", code_newempty, METH_VARARGS}, |
| {"make_exception_with_doc", (PyCFunction)make_exception_with_doc, |
| METH_VARARGS | METH_KEYWORDS}, |
| {"make_memoryview_from_NULL_pointer", make_memoryview_from_NULL_pointer, |
| METH_NOARGS}, |
| {"crash_no_current_thread", crash_no_current_thread, METH_NOARGS}, |
| {"run_in_subinterp", run_in_subinterp, METH_VARARGS}, |
| {"pytime_object_to_time_t", test_pytime_object_to_time_t, METH_VARARGS}, |
| {"pytime_object_to_timeval", test_pytime_object_to_timeval, METH_VARARGS}, |
| {"pytime_object_to_timespec", test_pytime_object_to_timespec, METH_VARARGS}, |
| {"with_tp_del", with_tp_del, METH_VARARGS}, |
| {"create_cfunction", create_cfunction, METH_NOARGS}, |
| {"test_pymem_alloc0", test_pymem_alloc0, METH_NOARGS}, |
| {"test_pymem_setrawallocators",test_pymem_setrawallocators, METH_NOARGS}, |
| {"test_pymem_setallocators",test_pymem_setallocators, METH_NOARGS}, |
| {"test_pyobject_setallocators",test_pyobject_setallocators, METH_NOARGS}, |
| {"set_nomemory", (PyCFunction)set_nomemory, METH_VARARGS, |
| PyDoc_STR("set_nomemory(start:int, stop:int = 0)")}, |
| {"remove_mem_hooks", remove_mem_hooks, METH_NOARGS, |
| PyDoc_STR("Remove memory hooks.")}, |
| {"no_docstring", |
| (PyCFunction)test_with_docstring, METH_NOARGS}, |
| {"docstring_empty", |
| (PyCFunction)test_with_docstring, METH_NOARGS, |
| docstring_empty}, |
| {"docstring_no_signature", |
| (PyCFunction)test_with_docstring, METH_NOARGS, |
| docstring_no_signature}, |
| {"docstring_with_invalid_signature", |
| (PyCFunction)test_with_docstring, METH_NOARGS, |
| docstring_with_invalid_signature}, |
| {"docstring_with_invalid_signature2", |
| (PyCFunction)test_with_docstring, METH_NOARGS, |
| docstring_with_invalid_signature2}, |
| {"docstring_with_signature", |
| (PyCFunction)test_with_docstring, METH_NOARGS, |
| docstring_with_signature}, |
| {"docstring_with_signature_but_no_doc", |
| (PyCFunction)test_with_docstring, METH_NOARGS, |
| docstring_with_signature_but_no_doc}, |
| {"docstring_with_signature_and_extra_newlines", |
| (PyCFunction)test_with_docstring, METH_NOARGS, |
| docstring_with_signature_and_extra_newlines}, |
| {"docstring_with_signature_with_defaults", |
| (PyCFunction)test_with_docstring, METH_NOARGS, |
| docstring_with_signature_with_defaults}, |
| {"raise_signal", |
| (PyCFunction)test_raise_signal, METH_VARARGS}, |
| {"call_in_temporary_c_thread", call_in_temporary_c_thread, METH_O, |
| PyDoc_STR("set_error_class(error_class) -> None")}, |
| {"pymarshal_write_long_to_file", |
| pymarshal_write_long_to_file, METH_VARARGS}, |
| {"pymarshal_write_object_to_file", |
| pymarshal_write_object_to_file, METH_VARARGS}, |
| {"pymarshal_read_short_from_file", |
| pymarshal_read_short_from_file, METH_VARARGS}, |
| {"pymarshal_read_long_from_file", |
| pymarshal_read_long_from_file, METH_VARARGS}, |
| {"pymarshal_read_last_object_from_file", |
| pymarshal_read_last_object_from_file, METH_VARARGS}, |
| {"pymarshal_read_object_from_file", |
| pymarshal_read_object_from_file, METH_VARARGS}, |
| {"return_null_without_error", |
| return_null_without_error, METH_NOARGS}, |
| {"return_result_with_error", |
| return_result_with_error, METH_NOARGS}, |
| {"PyTime_FromSeconds", test_pytime_fromseconds, METH_VARARGS}, |
| {"PyTime_FromSecondsObject", test_pytime_fromsecondsobject, METH_VARARGS}, |
| {"PyTime_AsSecondsDouble", test_pytime_assecondsdouble, METH_VARARGS}, |
| {"PyTime_AsTimeval", test_PyTime_AsTimeval, METH_VARARGS}, |
| #ifdef HAVE_CLOCK_GETTIME |
| {"PyTime_AsTimespec", test_PyTime_AsTimespec, METH_VARARGS}, |
| #endif |
| {"PyTime_AsMilliseconds", test_PyTime_AsMilliseconds, METH_VARARGS}, |
| {"PyTime_AsMicroseconds", test_PyTime_AsMicroseconds, METH_VARARGS}, |
| {"get_recursion_depth", get_recursion_depth, METH_NOARGS}, |
| {"pymem_buffer_overflow", pymem_buffer_overflow, METH_NOARGS}, |
| {"pymem_api_misuse", pymem_api_misuse, METH_NOARGS}, |
| {"pymem_malloc_without_gil", pymem_malloc_without_gil, METH_NOARGS}, |
| {"pymem_getallocatorsname", test_pymem_getallocatorsname, METH_NOARGS}, |
| {"pyobject_malloc_without_gil", pyobject_malloc_without_gil, METH_NOARGS}, |
| {"tracemalloc_track", tracemalloc_track, METH_VARARGS}, |
| {"tracemalloc_untrack", tracemalloc_untrack, METH_VARARGS}, |
| {"tracemalloc_get_traceback", tracemalloc_get_traceback, METH_VARARGS}, |
| {"dict_get_version", dict_get_version, METH_VARARGS}, |
| {"raise_SIGINT_then_send_None", raise_SIGINT_then_send_None, METH_VARARGS}, |
| {"pyobject_fastcall", test_pyobject_fastcall, METH_VARARGS}, |
| {"pyobject_fastcalldict", test_pyobject_fastcalldict, METH_VARARGS}, |
| {"pyobject_fastcallkeywords", test_pyobject_fastcallkeywords, METH_VARARGS}, |
| {"stack_pointer", stack_pointer, METH_NOARGS}, |
| #ifdef W_STOPCODE |
| {"W_STOPCODE", py_w_stopcode, METH_VARARGS}, |
| #endif |
| {"get_mapping_keys", get_mapping_keys, METH_O}, |
| {"get_mapping_values", get_mapping_values, METH_O}, |
| {"get_mapping_items", get_mapping_items, METH_O}, |
| {"test_pythread_tss_key_state", test_pythread_tss_key_state, METH_VARARGS}, |
| {"hamt", new_hamt, METH_NOARGS}, |
| {"bad_get", bad_get, METH_FASTCALL}, |
| {"EncodeLocaleEx", encode_locale_ex, METH_VARARGS}, |
| {"DecodeLocaleEx", decode_locale_ex, METH_VARARGS}, |
| {"get_coreconfig", get_coreconfig, METH_NOARGS}, |
| #ifdef Py_REF_DEBUG |
| {"negative_refcount", negative_refcount, METH_NOARGS}, |
| #endif |
| {NULL, NULL} /* sentinel */ |
| }; |
| |
| #define AddSym(d, n, f, v) {PyObject *o = f(v); PyDict_SetItemString(d, n, o); Py_DECREF(o);} |
| |
| typedef struct { |
| char bool_member; |
| char byte_member; |
| unsigned char ubyte_member; |
| short short_member; |
| unsigned short ushort_member; |
| int int_member; |
| unsigned int uint_member; |
| long long_member; |
| unsigned long ulong_member; |
| Py_ssize_t pyssizet_member; |
| float float_member; |
| double double_member; |
| char inplace_member[6]; |
| long long longlong_member; |
| unsigned long long ulonglong_member; |
| } all_structmembers; |
| |
| typedef struct { |
| PyObject_HEAD |
| all_structmembers structmembers; |
| } test_structmembers; |
| |
| static struct PyMemberDef test_members[] = { |
| {"T_BOOL", T_BOOL, offsetof(test_structmembers, structmembers.bool_member), 0, NULL}, |
| {"T_BYTE", T_BYTE, offsetof(test_structmembers, structmembers.byte_member), 0, NULL}, |
| {"T_UBYTE", T_UBYTE, offsetof(test_structmembers, structmembers.ubyte_member), 0, NULL}, |
| {"T_SHORT", T_SHORT, offsetof(test_structmembers, structmembers.short_member), 0, NULL}, |
| {"T_USHORT", T_USHORT, offsetof(test_structmembers, structmembers.ushort_member), 0, NULL}, |
| {"T_INT", T_INT, offsetof(test_structmembers, structmembers.int_member), 0, NULL}, |
| {"T_UINT", T_UINT, offsetof(test_structmembers, structmembers.uint_member), 0, NULL}, |
| {"T_LONG", T_LONG, offsetof(test_structmembers, structmembers.long_member), 0, NULL}, |
| {"T_ULONG", T_ULONG, offsetof(test_structmembers, structmembers.ulong_member), 0, NULL}, |
| {"T_PYSSIZET", T_PYSSIZET, offsetof(test_structmembers, structmembers.pyssizet_member), 0, NULL}, |
| {"T_FLOAT", T_FLOAT, offsetof(test_structmembers, structmembers.float_member), 0, NULL}, |
| {"T_DOUBLE", T_DOUBLE, offsetof(test_structmembers, structmembers.double_member), 0, NULL}, |
| {"T_STRING_INPLACE", T_STRING_INPLACE, offsetof(test_structmembers, structmembers.inplace_member), 0, NULL}, |
| {"T_LONGLONG", T_LONGLONG, offsetof(test_structmembers, structmembers.longlong_member), 0, NULL}, |
| {"T_ULONGLONG", T_ULONGLONG, offsetof(test_structmembers, structmembers.ulonglong_member), 0, NULL}, |
| {NULL} |
| }; |
| |
| |
| static PyObject * |
| test_structmembers_new(PyTypeObject *type, PyObject *args, PyObject *kwargs) |
| { |
| static char *keywords[] = { |
| "T_BOOL", "T_BYTE", "T_UBYTE", "T_SHORT", "T_USHORT", |
| "T_INT", "T_UINT", "T_LONG", "T_ULONG", "T_PYSSIZET", |
| "T_FLOAT", "T_DOUBLE", "T_STRING_INPLACE", |
| "T_LONGLONG", "T_ULONGLONG", |
| NULL}; |
| static const char fmt[] = "|bbBhHiIlknfds#LK"; |
| test_structmembers *ob; |
| const char *s = NULL; |
| Py_ssize_t string_len = 0; |
| ob = PyObject_New(test_structmembers, type); |
| if (ob == NULL) |
| return NULL; |
| memset(&ob->structmembers, 0, sizeof(all_structmembers)); |
| if (!PyArg_ParseTupleAndKeywords(args, kwargs, fmt, keywords, |
| &ob->structmembers.bool_member, |
| &ob->structmembers.byte_member, |
| &ob->structmembers.ubyte_member, |
| &ob->structmembers.short_member, |
| &ob->structmembers.ushort_member, |
| &ob->structmembers.int_member, |
| &ob->structmembers.uint_member, |
| &ob->structmembers.long_member, |
| &ob->structmembers.ulong_member, |
| &ob->structmembers.pyssizet_member, |
| &ob->structmembers.float_member, |
| &ob->structmembers.double_member, |
| &s, &string_len |
| , &ob->structmembers.longlong_member, |
| &ob->structmembers.ulonglong_member |
| )) { |
| Py_DECREF(ob); |
| return NULL; |
| } |
| if (s != NULL) { |
| if (string_len > 5) { |
| Py_DECREF(ob); |
| PyErr_SetString(PyExc_ValueError, "string too long"); |
| return NULL; |
| } |
| strcpy(ob->structmembers.inplace_member, s); |
| } |
| else { |
| strcpy(ob->structmembers.inplace_member, ""); |
| } |
| return (PyObject *)ob; |
| } |
| |
| static void |
| test_structmembers_free(PyObject *ob) |
| { |
| PyObject_FREE(ob); |
| } |
| |
| static PyTypeObject test_structmembersType = { |
| PyVarObject_HEAD_INIT(NULL, 0) |
| "test_structmembersType", |
| sizeof(test_structmembers), /* tp_basicsize */ |
| 0, /* tp_itemsize */ |
| test_structmembers_free, /* destructor tp_dealloc */ |
| 0, /* tp_print */ |
| 0, /* tp_getattr */ |
| 0, /* tp_setattr */ |
| 0, /* tp_reserved */ |
| 0, /* tp_repr */ |
| 0, /* tp_as_number */ |
| 0, /* tp_as_sequence */ |
| 0, /* tp_as_mapping */ |
| 0, /* tp_hash */ |
| 0, /* tp_call */ |
| 0, /* tp_str */ |
| PyObject_GenericGetAttr, /* tp_getattro */ |
| PyObject_GenericSetAttr, /* tp_setattro */ |
| 0, /* tp_as_buffer */ |
| 0, /* tp_flags */ |
| "Type containing all structmember types", |
| 0, /* traverseproc tp_traverse */ |
| 0, /* tp_clear */ |
| 0, /* tp_richcompare */ |
| 0, /* tp_weaklistoffset */ |
| 0, /* tp_iter */ |
| 0, /* tp_iternext */ |
| 0, /* tp_methods */ |
| test_members, /* tp_members */ |
| 0, |
| 0, |
| 0, |
| 0, |
| 0, |
| 0, |
| 0, |
| 0, |
| test_structmembers_new, /* tp_new */ |
| }; |
| |
| |
| typedef struct { |
| PyObject_HEAD |
| } matmulObject; |
| |
| static PyObject * |
| matmulType_matmul(PyObject *self, PyObject *other) |
| { |
| return Py_BuildValue("(sOO)", "matmul", self, other); |
| } |
| |
| static PyObject * |
| matmulType_imatmul(PyObject *self, PyObject *other) |
| { |
| return Py_BuildValue("(sOO)", "imatmul", self, other); |
| } |
| |
| static void |
| matmulType_dealloc(PyObject *self) |
| { |
| Py_TYPE(self)->tp_free(self); |
| } |
| |
| static PyNumberMethods matmulType_as_number = { |
| 0, /* nb_add */ |
| 0, /* nb_subtract */ |
| 0, /* nb_multiply */ |
| 0, /* nb_remainde r*/ |
| 0, /* nb_divmod */ |
| 0, /* nb_power */ |
| 0, /* nb_negative */ |
| 0, /* tp_positive */ |
| 0, /* tp_absolute */ |
| 0, /* tp_bool */ |
| 0, /* nb_invert */ |
| 0, /* nb_lshift */ |
| 0, /* nb_rshift */ |
| 0, /* nb_and */ |
| 0, /* nb_xor */ |
| 0, /* nb_or */ |
| 0, /* nb_int */ |
| 0, /* nb_reserved */ |
| 0, /* nb_float */ |
| 0, /* nb_inplace_add */ |
| 0, /* nb_inplace_subtract */ |
| 0, /* nb_inplace_multiply */ |
| 0, /* nb_inplace_remainder */ |
| 0, /* nb_inplace_power */ |
| 0, /* nb_inplace_lshift */ |
| 0, /* nb_inplace_rshift */ |
| 0, /* nb_inplace_and */ |
| 0, /* nb_inplace_xor */ |
| 0, /* nb_inplace_or */ |
| 0, /* nb_floor_divide */ |
| 0, /* nb_true_divide */ |
| 0, /* nb_inplace_floor_divide */ |
| 0, /* nb_inplace_true_divide */ |
| 0, /* nb_index */ |
| matmulType_matmul, /* nb_matrix_multiply */ |
| matmulType_imatmul /* nb_matrix_inplace_multiply */ |
| }; |
| |
| static PyTypeObject matmulType = { |
| PyVarObject_HEAD_INIT(NULL, 0) |
| "matmulType", |
| sizeof(matmulObject), /* tp_basicsize */ |
| 0, /* tp_itemsize */ |
| matmulType_dealloc, /* destructor tp_dealloc */ |
| 0, /* tp_print */ |
| 0, /* tp_getattr */ |
| 0, /* tp_setattr */ |
| 0, /* tp_reserved */ |
| 0, /* tp_repr */ |
| &matmulType_as_number, /* tp_as_number */ |
| 0, /* tp_as_sequence */ |
| 0, /* tp_as_mapping */ |
| 0, /* tp_hash */ |
| 0, /* tp_call */ |
| 0, /* tp_str */ |
| PyObject_GenericGetAttr, /* tp_getattro */ |
| PyObject_GenericSetAttr, /* tp_setattro */ |
| 0, /* tp_as_buffer */ |
| 0, /* tp_flags */ |
| "C level type with matrix operations defined", |
| 0, /* traverseproc tp_traverse */ |
| 0, /* tp_clear */ |
| 0, /* tp_richcompare */ |
| 0, /* tp_weaklistoffset */ |
| 0, /* tp_iter */ |
| 0, /* tp_iternext */ |
| 0, /* tp_methods */ |
| 0, /* tp_members */ |
| 0, |
| 0, |
| 0, |
| 0, |
| 0, |
| 0, |
| 0, |
| 0, |
| PyType_GenericNew, /* tp_new */ |
| PyObject_Del, /* tp_free */ |
| }; |
| |
| |
| typedef struct { |
| PyObject_HEAD |
| PyObject *ao_iterator; |
| } awaitObject; |
| |
| |
| static PyObject * |
| awaitObject_new(PyTypeObject *type, PyObject *args, PyObject *kwds) |
| { |
| PyObject *v; |
| awaitObject *ao; |
| |
| if (!PyArg_UnpackTuple(args, "awaitObject", 1, 1, &v)) |
| return NULL; |
| |
| ao = (awaitObject *)type->tp_alloc(type, 0); |
| if (ao == NULL) { |
| return NULL; |
| } |
| |
| Py_INCREF(v); |
| ao->ao_iterator = v; |
| |
| return (PyObject *)ao; |
| } |
| |
| |
| static void |
| awaitObject_dealloc(awaitObject *ao) |
| { |
| Py_CLEAR(ao->ao_iterator); |
| Py_TYPE(ao)->tp_free(ao); |
| } |
| |
| |
| static PyObject * |
| awaitObject_await(awaitObject *ao) |
| { |
| Py_INCREF(ao->ao_iterator); |
| return ao->ao_iterator; |
| } |
| |
| static PyAsyncMethods awaitType_as_async = { |
| (unaryfunc)awaitObject_await, /* am_await */ |
| 0, /* am_aiter */ |
| 0 /* am_anext */ |
| }; |
| |
| |
| static PyTypeObject awaitType = { |
| PyVarObject_HEAD_INIT(NULL, 0) |
| "awaitType", |
| sizeof(awaitObject), /* tp_basicsize */ |
| 0, /* tp_itemsize */ |
| (destructor)awaitObject_dealloc, /* destructor tp_dealloc */ |
| 0, /* tp_print */ |
| 0, /* tp_getattr */ |
| 0, /* tp_setattr */ |
| &awaitType_as_async, /* tp_as_async */ |
| 0, /* tp_repr */ |
| 0, /* tp_as_number */ |
| 0, /* tp_as_sequence */ |
| 0, /* tp_as_mapping */ |
| 0, /* tp_hash */ |
| 0, /* tp_call */ |
| 0, /* tp_str */ |
| PyObject_GenericGetAttr, /* tp_getattro */ |
| PyObject_GenericSetAttr, /* tp_setattro */ |
| 0, /* tp_as_buffer */ |
| 0, /* tp_flags */ |
| "C level type with tp_as_async", |
| 0, /* traverseproc tp_traverse */ |
| 0, /* tp_clear */ |
| 0, /* tp_richcompare */ |
| 0, /* tp_weaklistoffset */ |
| 0, /* tp_iter */ |
| 0, /* tp_iternext */ |
| 0, /* tp_methods */ |
| 0, /* tp_members */ |
| 0, |
| 0, |
| 0, |
| 0, |
| 0, |
| 0, |
| 0, |
| 0, |
| awaitObject_new, /* tp_new */ |
| PyObject_Del, /* tp_free */ |
| }; |
| |
| |
| static int recurse_infinitely_error_init(PyObject *, PyObject *, PyObject *); |
| |
| static PyTypeObject PyRecursingInfinitelyError_Type = { |
| PyVarObject_HEAD_INIT(NULL, 0) |
| "RecursingInfinitelyError", /* tp_name */ |
| sizeof(PyBaseExceptionObject), /* tp_basicsize */ |
| 0, /* tp_itemsize */ |
| 0, /* tp_dealloc */ |
| 0, /* tp_print */ |
| 0, /* tp_getattr */ |
| 0, /* tp_setattr */ |
| 0, /* tp_reserved */ |
| 0, /* tp_repr */ |
| 0, /* tp_as_number */ |
| 0, /* tp_as_sequence */ |
| 0, /* tp_as_mapping */ |
| 0, /* tp_hash */ |
| 0, /* tp_call */ |
| 0, /* tp_str */ |
| 0, /* tp_getattro */ |
| 0, /* tp_setattro */ |
| 0, /* tp_as_buffer */ |
| Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE, /* tp_flags */ |
| "Instantiating this exception starts infinite recursion.", /* tp_doc */ |
| 0, /* tp_traverse */ |
| 0, /* tp_clear */ |
| 0, /* tp_richcompare */ |
| 0, /* tp_weaklistoffset */ |
| 0, /* tp_iter */ |
| 0, /* tp_iternext */ |
| 0, /* tp_methods */ |
| 0, /* tp_members */ |
| 0, /* tp_getset */ |
| 0, /* tp_base */ |
| 0, /* tp_dict */ |
| 0, /* tp_descr_get */ |
| 0, /* tp_descr_set */ |
| 0, /* tp_dictoffset */ |
| (initproc)recurse_infinitely_error_init, /* tp_init */ |
| 0, /* tp_alloc */ |
| 0, /* tp_new */ |
| }; |
| |
| static int |
| recurse_infinitely_error_init(PyObject *self, PyObject *args, PyObject *kwds) |
| { |
| PyObject *type = (PyObject *)&PyRecursingInfinitelyError_Type; |
| |
| /* Instantiating this exception starts infinite recursion. */ |
| Py_INCREF(type); |
| PyErr_SetObject(type, NULL); |
| return -1; |
| } |
| |
| |
| /* Test PEP 560 */ |
| |
| typedef struct { |
| PyObject_HEAD |
| PyObject *item; |
| } PyGenericAliasObject; |
| |
| static void |
| generic_alias_dealloc(PyGenericAliasObject *self) |
| { |
| Py_CLEAR(self->item); |
| Py_TYPE(self)->tp_free((PyObject *)self); |
| } |
| |
| static PyObject * |
| generic_alias_mro_entries(PyGenericAliasObject *self, PyObject *bases) |
| { |
| return PyTuple_Pack(1, self->item); |
| } |
| |
| static PyMethodDef generic_alias_methods[] = { |
| {"__mro_entries__", (PyCFunction) generic_alias_mro_entries, METH_O, NULL}, |
| {NULL} /* sentinel */ |
| }; |
| |
| static PyTypeObject GenericAlias_Type = { |
| PyVarObject_HEAD_INIT(NULL, 0) |
| "GenericAlias", |
| sizeof(PyGenericAliasObject), |
| 0, |
| .tp_dealloc = (destructor)generic_alias_dealloc, |
| .tp_flags = Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE, |
| .tp_methods = generic_alias_methods, |
| }; |
| |
| static PyObject * |
| generic_alias_new(PyObject *item) |
| { |
| PyGenericAliasObject *o = PyObject_New(PyGenericAliasObject, &GenericAlias_Type); |
| if (o == NULL) { |
| return NULL; |
| } |
| Py_INCREF(item); |
| o->item = item; |
| return (PyObject*) o; |
| } |
| |
| typedef struct { |
| PyObject_HEAD |
| } PyGenericObject; |
| |
| static PyObject * |
| generic_class_getitem(PyObject *type, PyObject *item) |
| { |
| return generic_alias_new(item); |
| } |
| |
| static PyMethodDef generic_methods[] = { |
| {"__class_getitem__", generic_class_getitem, METH_O|METH_CLASS, NULL}, |
| {NULL} /* sentinel */ |
| }; |
| |
| static PyTypeObject Generic_Type = { |
| PyVarObject_HEAD_INIT(NULL, 0) |
| "Generic", |
| sizeof(PyGenericObject), |
| 0, |
| .tp_flags = Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE, |
| .tp_methods = generic_methods, |
| }; |
| |
| |
| static struct PyModuleDef _testcapimodule = { |
| PyModuleDef_HEAD_INIT, |
| "_testcapi", |
| NULL, |
| -1, |
| TestMethods, |
| NULL, |
| NULL, |
| NULL, |
| NULL |
| }; |
| |
| /* Per PEP 489, this module will not be converted to multi-phase initialization |
| */ |
| |
| PyMODINIT_FUNC |
| PyInit__testcapi(void) |
| { |
| PyObject *m; |
| |
| m = PyModule_Create(&_testcapimodule); |
| if (m == NULL) |
| return NULL; |
| |
| Py_TYPE(&_HashInheritanceTester_Type)=&PyType_Type; |
| |
| Py_TYPE(&test_structmembersType)=&PyType_Type; |
| Py_INCREF(&test_structmembersType); |
| /* don't use a name starting with "test", since we don't want |
| test_capi to automatically call this */ |
| PyModule_AddObject(m, "_test_structmembersType", (PyObject *)&test_structmembersType); |
| if (PyType_Ready(&matmulType) < 0) |
| return NULL; |
| Py_INCREF(&matmulType); |
| PyModule_AddObject(m, "matmulType", (PyObject *)&matmulType); |
| |
| if (PyType_Ready(&awaitType) < 0) |
| return NULL; |
| Py_INCREF(&awaitType); |
| PyModule_AddObject(m, "awaitType", (PyObject *)&awaitType); |
| |
| if (PyType_Ready(&GenericAlias_Type) < 0) |
| return NULL; |
| Py_INCREF(&GenericAlias_Type); |
| PyModule_AddObject(m, "GenericAlias", (PyObject *)&GenericAlias_Type); |
| |
| if (PyType_Ready(&Generic_Type) < 0) |
| return NULL; |
| Py_INCREF(&Generic_Type); |
| PyModule_AddObject(m, "Generic", (PyObject *)&Generic_Type); |
| |
| PyRecursingInfinitelyError_Type.tp_base = (PyTypeObject *)PyExc_Exception; |
| if (PyType_Ready(&PyRecursingInfinitelyError_Type) < 0) { |
| return NULL; |
| } |
| Py_INCREF(&PyRecursingInfinitelyError_Type); |
| PyModule_AddObject(m, "RecursingInfinitelyError", |
| (PyObject *)&PyRecursingInfinitelyError_Type); |
| |
| PyModule_AddObject(m, "CHAR_MAX", PyLong_FromLong(CHAR_MAX)); |
| PyModule_AddObject(m, "CHAR_MIN", PyLong_FromLong(CHAR_MIN)); |
| PyModule_AddObject(m, "UCHAR_MAX", PyLong_FromLong(UCHAR_MAX)); |
| PyModule_AddObject(m, "SHRT_MAX", PyLong_FromLong(SHRT_MAX)); |
| PyModule_AddObject(m, "SHRT_MIN", PyLong_FromLong(SHRT_MIN)); |
| PyModule_AddObject(m, "USHRT_MAX", PyLong_FromLong(USHRT_MAX)); |
| PyModule_AddObject(m, "INT_MAX", PyLong_FromLong(INT_MAX)); |
| PyModule_AddObject(m, "INT_MIN", PyLong_FromLong(INT_MIN)); |
| PyModule_AddObject(m, "UINT_MAX", PyLong_FromUnsignedLong(UINT_MAX)); |
| PyModule_AddObject(m, "LONG_MAX", PyLong_FromLong(LONG_MAX)); |
| PyModule_AddObject(m, "LONG_MIN", PyLong_FromLong(LONG_MIN)); |
| PyModule_AddObject(m, "ULONG_MAX", PyLong_FromUnsignedLong(ULONG_MAX)); |
| PyModule_AddObject(m, "FLT_MAX", PyFloat_FromDouble(FLT_MAX)); |
| PyModule_AddObject(m, "FLT_MIN", PyFloat_FromDouble(FLT_MIN)); |
| PyModule_AddObject(m, "DBL_MAX", PyFloat_FromDouble(DBL_MAX)); |
| PyModule_AddObject(m, "DBL_MIN", PyFloat_FromDouble(DBL_MIN)); |
| PyModule_AddObject(m, "LLONG_MAX", PyLong_FromLongLong(PY_LLONG_MAX)); |
| PyModule_AddObject(m, "LLONG_MIN", PyLong_FromLongLong(PY_LLONG_MIN)); |
| PyModule_AddObject(m, "ULLONG_MAX", PyLong_FromUnsignedLongLong(PY_ULLONG_MAX)); |
| PyModule_AddObject(m, "PY_SSIZE_T_MAX", PyLong_FromSsize_t(PY_SSIZE_T_MAX)); |
| PyModule_AddObject(m, "PY_SSIZE_T_MIN", PyLong_FromSsize_t(PY_SSIZE_T_MIN)); |
| PyModule_AddObject(m, "SIZEOF_PYGC_HEAD", PyLong_FromSsize_t(sizeof(PyGC_Head))); |
| PyModule_AddObject(m, "SIZEOF_TIME_T", PyLong_FromSsize_t(sizeof(time_t))); |
| Py_INCREF(&PyInstanceMethod_Type); |
| PyModule_AddObject(m, "instancemethod", (PyObject *)&PyInstanceMethod_Type); |
| |
| PyModule_AddIntConstant(m, "the_number_three", 3); |
| #ifdef WITH_PYMALLOC |
| PyModule_AddObject(m, "WITH_PYMALLOC", Py_True); |
| #else |
| PyModule_AddObject(m, "WITH_PYMALLOC", Py_False); |
| #endif |
| |
| TestError = PyErr_NewException("_testcapi.error", NULL, NULL); |
| Py_INCREF(TestError); |
| PyModule_AddObject(m, "error", TestError); |
| return m; |
| } |