diff --git a/Modules/Setup.config.in b/Modules/Setup.config.in
index f9c5851..424099f 100644
--- a/Modules/Setup.config.in
+++ b/Modules/Setup.config.in
@@ -1,19 +1,24 @@
 # This file is transmogrified into Setup.config by config.status.
 
 # The purpose of this file is to conditionally enable certain modules
-# based on configure-time options.  Currently thread support, garbage
-# collection support, and the BSD DB modules are the only modules so
-# enabled.
-
-@USE_THREAD_MODULE@thread threadmodule.c
+# based on configure-time options.
 
 # Garbage collection enabled with --with-cycle-gc
 @USE_GC_MODULE@gc gcmodule.c
 
-# You may want this to be built as a dynamically loaded module; uncomment
-# the following line in that case:
+# Threading
+@USE_THREAD_MODULE@thread threadmodule.c
 
-#*shared*
+# You may want the following to be built as statically loaded modules;
+# comment out the *shared* line in that case:
+
+*shared*
+
+# Readline
+@USE_READLINE_MODULE@readline readline.c -lreadline -ltermcap
+
+# The ncurses library, under Linux
+@USE_NCURSES_MODULE@_curses _cursesmodule.c -lncurses -ltermcap
 
 # bsddb module enabled by --with-libdb or presence of db.h
 @USE_BSDDB_MODULE@bsddb bsddbmodule.c @HAVE_LIBDB@
diff --git a/Modules/Setup.dist b/Modules/Setup.dist
index 53ab1fb..522ca52 100644
--- a/Modules/Setup.dist
+++ b/Modules/Setup.dist
@@ -120,6 +120,8 @@
 # and you may have to change -ltermcap to -ltermlib or perhaps remove
 # it, depending on your system -- see the GNU readline instructions.
 # It's okay for this to be a shared library, too.
+#
+# First, look at Setup.config; configure may have set this for you.
 
 #readline readline.c -lreadline -ltermcap
 
@@ -322,6 +324,8 @@
 # provided by the ncurses library.  e.g. on Linux, link with -lncurses
 # instead of -lcurses; on SunOS 4.1.3, insert -I/usr/5include
 # -L/usr/5lib before -lcurses).
+#
+# First, look at Setup.config; configure may have set this for you.
 
 #_curses _cursesmodule.c -lcurses -ltermcap
 # Wrapper for the panel library that's part of ncurses and SYSV curses.
diff --git a/configure b/configure
index fed8a06..c9f4a18 100755
--- a/configure
+++ b/configure
@@ -1,6 +1,6 @@
 #! /bin/sh
 
-# From configure.in Revision: 1.182 
+# From configure.in Revision: 1.184 
 
 # Guess values for system-dependent variables and create Makefiles.
 # Generated automatically using autoconf version 2.13 
@@ -3141,11 +3141,100 @@
 fi
 
 
+# This is used to generate Setup.config
+
+echo $ac_n "checking for initscr in -lncurses""... $ac_c" 1>&6
+echo "configure:3148: checking for initscr in -lncurses" >&5
+ac_lib_var=`echo ncurses'_'initscr | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-lncurses -ltermcap $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3156 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char initscr();
+
+int main() {
+initscr()
+; return 0; }
+EOF
+if { (eval echo configure:3167: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  USE_NCURSES_MODULE=""
+else
+  echo "$ac_t""no" 1>&6
+USE_NCURSES_MODULE="#"
+fi
+
+
+# This is used to generate Setup.config
+
+echo $ac_n "checking for readline in -lreadline""... $ac_c" 1>&6
+echo "configure:3192: checking for readline in -lreadline" >&5
+ac_lib_var=`echo readline'_'readline | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-lreadline -ltermcap $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3200 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char readline();
+
+int main() {
+readline()
+; return 0; }
+EOF
+if { (eval echo configure:3211: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  USE_READLINE_MODULE=""
+else
+  echo "$ac_t""no" 1>&6
+USE_READLINE_MODULE="#"
+fi
+
+
+# This is used to generate Setup.config
 
 USE_THREAD_MODULE=""
 
 echo $ac_n "checking for --with-dec-threads""... $ac_c" 1>&6
-echo "configure:3149: checking for --with-dec-threads" >&5
+echo "configure:3238: checking for --with-dec-threads" >&5
 
 # Check whether --with-dec-threads or --without-dec-threads was given.
 if test "${with_dec_threads+set}" = set; then
@@ -3162,7 +3251,7 @@
 
 
 echo $ac_n "checking for --with-threads""... $ac_c" 1>&6
-echo "configure:3166: checking for --with-threads" >&5
+echo "configure:3255: checking for --with-threads" >&5
 # Check whether --with-threads or --without-threads was given.
 if test "${with_threads+set}" = set; then
   withval="$with_threads"
@@ -3200,17 +3289,17 @@
 
     ac_safe=`echo "mach/cthreads.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for mach/cthreads.h""... $ac_c" 1>&6
-echo "configure:3204: checking for mach/cthreads.h" >&5
+echo "configure:3293: checking for mach/cthreads.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3209 "configure"
+#line 3298 "configure"
 #include "confdefs.h"
 #include <mach/cthreads.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3214: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3303: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3239,7 +3328,7 @@
   echo "$ac_t""no" 1>&6
 
     echo $ac_n "checking for --with-pth""... $ac_c" 1>&6
-echo "configure:3243: checking for --with-pth" >&5
+echo "configure:3332: checking for --with-pth" >&5
     # Check whether --with-pth or --without-pth was given.
 if test "${with_pth+set}" = set; then
   withval="$with_pth"
@@ -3259,7 +3348,7 @@
   
     echo "$ac_t""no" 1>&6
     echo $ac_n "checking for pthread_create in -lpthread""... $ac_c" 1>&6
-echo "configure:3263: checking for pthread_create in -lpthread" >&5
+echo "configure:3352: checking for pthread_create in -lpthread" >&5
 ac_lib_var=`echo pthread'_'pthread_create | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3267,7 +3356,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-lpthread  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3271 "configure"
+#line 3360 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3278,7 +3367,7 @@
 pthread_create()
 ; return 0; }
 EOF
-if { (eval echo configure:3282: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3371: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3307,12 +3396,12 @@
   echo "$ac_t""no" 1>&6
 
     echo $ac_n "checking for pthread_detach""... $ac_c" 1>&6
-echo "configure:3311: checking for pthread_detach" >&5
+echo "configure:3400: checking for pthread_detach" >&5
 if eval "test \"`echo '$''{'ac_cv_func_pthread_detach'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3316 "configure"
+#line 3405 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char pthread_detach(); below.  */
@@ -3335,7 +3424,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:3339: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3428: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_pthread_detach=yes"
 else
@@ -3366,17 +3455,17 @@
 
     ac_safe=`echo "kernel/OS.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for kernel/OS.h""... $ac_c" 1>&6
-echo "configure:3370: checking for kernel/OS.h" >&5
+echo "configure:3459: checking for kernel/OS.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3375 "configure"
+#line 3464 "configure"
 #include "confdefs.h"
 #include <kernel/OS.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3380: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3469: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3405,7 +3494,7 @@
   echo "$ac_t""no" 1>&6
 
     echo $ac_n "checking for pthread_create in -lpthreads""... $ac_c" 1>&6
-echo "configure:3409: checking for pthread_create in -lpthreads" >&5
+echo "configure:3498: checking for pthread_create in -lpthreads" >&5
 ac_lib_var=`echo pthreads'_'pthread_create | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3413,7 +3502,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-lpthreads  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3417 "configure"
+#line 3506 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3424,7 +3513,7 @@
 pthread_create()
 ; return 0; }
 EOF
-if { (eval echo configure:3428: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3517: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3453,7 +3542,7 @@
   echo "$ac_t""no" 1>&6
 
     echo $ac_n "checking for pthread_create in -lc_r""... $ac_c" 1>&6
-echo "configure:3457: checking for pthread_create in -lc_r" >&5
+echo "configure:3546: checking for pthread_create in -lc_r" >&5
 ac_lib_var=`echo c_r'_'pthread_create | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3461,7 +3550,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-lc_r  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3465 "configure"
+#line 3554 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3472,7 +3561,7 @@
 pthread_create()
 ; return 0; }
 EOF
-if { (eval echo configure:3476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3565: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3501,7 +3590,7 @@
   echo "$ac_t""no" 1>&6
 
     echo $ac_n "checking for __d6_pthread_create in -lthread""... $ac_c" 1>&6
-echo "configure:3505: checking for __d6_pthread_create in -lthread" >&5
+echo "configure:3594: checking for __d6_pthread_create in -lthread" >&5
 ac_lib_var=`echo thread'_'__d6_pthread_create | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3509,7 +3598,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-lthread  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3513 "configure"
+#line 3602 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3520,7 +3609,7 @@
 __d6_pthread_create()
 ; return 0; }
 EOF
-if { (eval echo configure:3524: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3613: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3549,7 +3638,7 @@
   echo "$ac_t""no" 1>&6
 
     echo $ac_n "checking for __pthread_create_system in -lpthread""... $ac_c" 1>&6
-echo "configure:3553: checking for __pthread_create_system in -lpthread" >&5
+echo "configure:3642: checking for __pthread_create_system in -lpthread" >&5
 ac_lib_var=`echo pthread'_'__pthread_create_system | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3557,7 +3646,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-lpthread  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3561 "configure"
+#line 3650 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3568,7 +3657,7 @@
 __pthread_create_system()
 ; return 0; }
 EOF
-if { (eval echo configure:3572: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3661: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3597,7 +3686,7 @@
   echo "$ac_t""no" 1>&6
 
     echo $ac_n "checking for pthread_create in -lcma""... $ac_c" 1>&6
-echo "configure:3601: checking for pthread_create in -lcma" >&5
+echo "configure:3690: checking for pthread_create in -lcma" >&5
 ac_lib_var=`echo cma'_'pthread_create | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3605,7 +3694,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-lcma  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3609 "configure"
+#line 3698 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3616,7 +3705,7 @@
 pthread_create()
 ; return 0; }
 EOF
-if { (eval echo configure:3620: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3709: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3668,7 +3757,7 @@
 
 
     echo $ac_n "checking for usconfig in -lmpc""... $ac_c" 1>&6
-echo "configure:3672: checking for usconfig in -lmpc" >&5
+echo "configure:3761: checking for usconfig in -lmpc" >&5
 ac_lib_var=`echo mpc'_'usconfig | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3676,7 +3765,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-lmpc  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3680 "configure"
+#line 3769 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3687,7 +3776,7 @@
 usconfig()
 ; return 0; }
 EOF
-if { (eval echo configure:3691: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3780: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3714,7 +3803,7 @@
 fi
 
     echo $ac_n "checking for thr_create in -lthread""... $ac_c" 1>&6
-echo "configure:3718: checking for thr_create in -lthread" >&5
+echo "configure:3807: checking for thr_create in -lthread" >&5
 ac_lib_var=`echo thread'_'thr_create | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3722,7 +3811,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-lthread  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3726 "configure"
+#line 3815 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3733,7 +3822,7 @@
 thr_create()
 ; return 0; }
 EOF
-if { (eval echo configure:3737: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3826: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3774,7 +3863,7 @@
 
 USE_GC_MODULE=""
 echo $ac_n "checking for --with-cycle-gc""... $ac_c" 1>&6
-echo "configure:3778: checking for --with-cycle-gc" >&5
+echo "configure:3867: checking for --with-cycle-gc" >&5
 # Check whether --with-cycle-gc or --without-cycle-gc was given.
 if test "${with_cycle_gc+set}" = set; then
   withval="$with_cycle_gc"
@@ -3801,7 +3890,7 @@
 
 USE_BSDDB_MODULE=""
 echo $ac_n "checking for --with-libdb""... $ac_c" 1>&6
-echo "configure:3805: checking for --with-libdb" >&5
+echo "configure:3894: checking for --with-libdb" >&5
 # Check whether --with-libdb or --without-libdb was given.
 if test "${with_libdb+set}" = set; then
   withval="$with_libdb"
@@ -3844,12 +3933,12 @@
     # Instead, we just trust it is in libdb; linking will fail if it
     # is not.
     echo $ac_n "checking for dbopen""... $ac_c" 1>&6
-echo "configure:3848: checking for dbopen" >&5
+echo "configure:3937: checking for dbopen" >&5
 if eval "test \"`echo '$''{'ac_cv_func_dbopen'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3853 "configure"
+#line 3942 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char dbopen(); below.  */
@@ -3872,7 +3961,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:3876: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3965: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_dbopen=yes"
 else
@@ -3896,7 +3985,7 @@
 
 # Check for --with-wctype-functions
 echo $ac_n "checking for --with-wctype-functions""... $ac_c" 1>&6
-echo "configure:3900: checking for --with-wctype-functions" >&5
+echo "configure:3989: checking for --with-wctype-functions" >&5
 # Check whether --with-wctype-functions or --without-wctype-functions was given.
 if test "${with_wctype_functions+set}" = set; then
   withval="$with_wctype_functions"
@@ -3918,7 +4007,7 @@
 DLINCLDIR=/
 
 echo $ac_n "checking for --with-sgi-dl""... $ac_c" 1>&6
-echo "configure:3922: checking for --with-sgi-dl" >&5
+echo "configure:4011: checking for --with-sgi-dl" >&5
 # Check whether --with-sgi-dl or --without-sgi-dl was given.
 if test "${with_sgi_dl+set}" = set; then
   withval="$with_sgi_dl"
@@ -3942,7 +4031,7 @@
 
 
 echo $ac_n "checking for --with-dl-dld""... $ac_c" 1>&6
-echo "configure:3946: checking for --with-dl-dld" >&5
+echo "configure:4035: checking for --with-dl-dld" >&5
 # Check whether --with-dl-dld or --without-dl-dld was given.
 if test "${with_dl_dld+set}" = set; then
   withval="$with_dl_dld"
@@ -3971,12 +4060,12 @@
 for ac_func in dlopen
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3975: checking for $ac_func" >&5
+echo "configure:4064: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3980 "configure"
+#line 4069 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3999,7 +4088,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:4003: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4092: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4028,7 +4117,7 @@
 # loading of modules.
 
 echo $ac_n "checking DYNLOADFILE""... $ac_c" 1>&6
-echo "configure:4032: checking DYNLOADFILE" >&5
+echo "configure:4121: checking DYNLOADFILE" >&5
 if test -z "$DYNLOADFILE"
 then
 	case $ac_sys_system/$ac_sys_release in
@@ -4069,12 +4158,12 @@
  truncate uname waitpid _getpty
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4073: checking for $ac_func" >&5
+echo "configure:4162: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4078 "configure"
+#line 4167 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -4097,7 +4186,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:4101: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4190: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4127,12 +4216,12 @@
 for ac_func in openpty
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4131: checking for $ac_func" >&5
+echo "configure:4220: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4136 "configure"
+#line 4225 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -4155,7 +4244,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:4159: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4177,7 +4266,7 @@
 else
   echo "$ac_t""no" 1>&6
 echo $ac_n "checking for openpty in -lutil""... $ac_c" 1>&6
-echo "configure:4181: checking for openpty in -lutil" >&5
+echo "configure:4270: checking for openpty in -lutil" >&5
 ac_lib_var=`echo util'_'openpty | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -4185,7 +4274,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-lutil  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4189 "configure"
+#line 4278 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -4196,7 +4285,7 @@
 openpty()
 ; return 0; }
 EOF
-if { (eval echo configure:4200: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4289: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -4225,12 +4314,12 @@
 for ac_func in forkpty
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4229: checking for $ac_func" >&5
+echo "configure:4318: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4234 "configure"
+#line 4323 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -4253,7 +4342,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:4257: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4346: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4275,7 +4364,7 @@
 else
   echo "$ac_t""no" 1>&6
 echo $ac_n "checking for forkpty in -lutil""... $ac_c" 1>&6
-echo "configure:4279: checking for forkpty in -lutil" >&5
+echo "configure:4368: checking for forkpty in -lutil" >&5
 ac_lib_var=`echo util'_'forkpty | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -4283,7 +4372,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-lutil  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4287 "configure"
+#line 4376 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -4294,7 +4383,7 @@
 forkpty()
 ; return 0; }
 EOF
-if { (eval echo configure:4298: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4387: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -4325,12 +4414,12 @@
 for ac_func in fseek64 fseeko fstatvfs ftell64 ftello statvfs
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4329: checking for $ac_func" >&5
+echo "configure:4418: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4334 "configure"
+#line 4423 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -4353,7 +4442,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:4357: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4446: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4381,12 +4470,12 @@
 for ac_func in dup2 getcwd strdup strerror memmove
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4385: checking for $ac_func" >&5
+echo "configure:4474: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4390 "configure"
+#line 4479 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -4409,7 +4498,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:4413: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4502: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4438,12 +4527,12 @@
 for ac_func in getpgrp
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4442: checking for $ac_func" >&5
+echo "configure:4531: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4447 "configure"
+#line 4536 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -4466,7 +4555,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:4470: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4559: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4485,14 +4574,14 @@
 #define $ac_tr_func 1
 EOF
  cat > conftest.$ac_ext <<EOF
-#line 4489 "configure"
+#line 4578 "configure"
 #include "confdefs.h"
 #include <unistd.h>
 int main() {
 getpgrp(0);
 ; return 0; }
 EOF
-if { (eval echo configure:4496: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4585: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   cat >> confdefs.h <<\EOF
 #define GETPGRP_HAVE_ARG 1
@@ -4511,12 +4600,12 @@
 for ac_func in setpgrp
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4515: checking for $ac_func" >&5
+echo "configure:4604: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4520 "configure"
+#line 4609 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -4539,7 +4628,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:4543: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4632: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4558,14 +4647,14 @@
 #define $ac_tr_func 1
 EOF
  cat > conftest.$ac_ext <<EOF
-#line 4562 "configure"
+#line 4651 "configure"
 #include "confdefs.h"
 #include <unistd.h>
 int main() {
 setpgrp(0,0);
 ; return 0; }
 EOF
-if { (eval echo configure:4569: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4658: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   cat >> confdefs.h <<\EOF
 #define SETPGRP_HAVE_ARG 1
@@ -4584,12 +4673,12 @@
 for ac_func in gettimeofday
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4588: checking for $ac_func" >&5
+echo "configure:4677: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4593 "configure"
+#line 4682 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -4612,7 +4701,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:4616: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4705: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4631,14 +4720,14 @@
 #define $ac_tr_func 1
 EOF
  cat > conftest.$ac_ext <<EOF
-#line 4635 "configure"
+#line 4724 "configure"
 #include "confdefs.h"
 #include <sys/time.h>
 int main() {
 gettimeofday((struct timeval*)0,(struct timezone*)0);
 ; return 0; }
 EOF
-if { (eval echo configure:4642: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4731: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   :
 else
   echo "configure: failed program was:" >&5
@@ -4658,12 +4747,12 @@
 
 # checks for structures
 echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:4662: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:4751: checking whether time.h and sys/time.h may both be included" >&5
 if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4667 "configure"
+#line 4756 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/time.h>
@@ -4672,7 +4761,7 @@
 struct tm *tp;
 ; return 0; }
 EOF
-if { (eval echo configure:4676: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4765: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_header_time=yes
 else
@@ -4693,12 +4782,12 @@
 fi
 
 echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6
-echo "configure:4697: checking whether struct tm is in sys/time.h or time.h" >&5
+echo "configure:4786: checking whether struct tm is in sys/time.h or time.h" >&5
 if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4702 "configure"
+#line 4791 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <time.h>
@@ -4706,7 +4795,7 @@
 struct tm *tp; tp->tm_sec;
 ; return 0; }
 EOF
-if { (eval echo configure:4710: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4799: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_struct_tm=time.h
 else
@@ -4727,12 +4816,12 @@
 fi
 
 echo $ac_n "checking for tm_zone in struct tm""... $ac_c" 1>&6
-echo "configure:4731: checking for tm_zone in struct tm" >&5
+echo "configure:4820: checking for tm_zone in struct tm" >&5
 if eval "test \"`echo '$''{'ac_cv_struct_tm_zone'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4736 "configure"
+#line 4825 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <$ac_cv_struct_tm>
@@ -4740,7 +4829,7 @@
 struct tm tm; tm.tm_zone;
 ; return 0; }
 EOF
-if { (eval echo configure:4744: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4833: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_struct_tm_zone=yes
 else
@@ -4760,12 +4849,12 @@
 
 else
   echo $ac_n "checking for tzname""... $ac_c" 1>&6
-echo "configure:4764: checking for tzname" >&5
+echo "configure:4853: checking for tzname" >&5
 if eval "test \"`echo '$''{'ac_cv_var_tzname'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4769 "configure"
+#line 4858 "configure"
 #include "confdefs.h"
 #include <time.h>
 #ifndef tzname /* For SGI.  */
@@ -4775,7 +4864,7 @@
 atoi(*tzname);
 ; return 0; }
 EOF
-if { (eval echo configure:4779: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4868: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_var_tzname=yes
 else
@@ -4798,19 +4887,19 @@
 
 
 echo $ac_n "checking for time.h that defines altzone""... $ac_c" 1>&6
-echo "configure:4802: checking for time.h that defines altzone" >&5
+echo "configure:4891: checking for time.h that defines altzone" >&5
 if eval "test \"`echo '$''{'ac_cv_header_time_altzone'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4807 "configure"
+#line 4896 "configure"
 #include "confdefs.h"
 #include <time.h>
 int main() {
 return altzone;
 ; return 0; }
 EOF
-if { (eval echo configure:4814: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4903: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_header_time_altzone=yes
 else
@@ -4832,9 +4921,9 @@
 
 was_it_defined=no
 echo $ac_n "checking whether sys/select.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:4836: checking whether sys/select.h and sys/time.h may both be included" >&5
+echo "configure:4925: checking whether sys/select.h and sys/time.h may both be included" >&5
 cat > conftest.$ac_ext <<EOF
-#line 4838 "configure"
+#line 4927 "configure"
 #include "confdefs.h"
 
 #include <sys/types.h>
@@ -4845,7 +4934,7 @@
 ;
 ; return 0; }
 EOF
-if { (eval echo configure:4849: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4938: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   cat >> confdefs.h <<\EOF
 #define SYS_SELECT_WITH_SYS_TIME 1
@@ -4861,14 +4950,14 @@
 # checks for compiler characteristics
 
 echo $ac_n "checking whether char is unsigned""... $ac_c" 1>&6
-echo "configure:4865: checking whether char is unsigned" >&5
+echo "configure:4954: checking whether char is unsigned" >&5
 if eval "test \"`echo '$''{'ac_cv_c_char_unsigned'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test "$GCC" = yes; then
   # GCC predefines this symbol on systems where it applies.
 cat > conftest.$ac_ext <<EOF
-#line 4872 "configure"
+#line 4961 "configure"
 #include "confdefs.h"
 #ifdef __CHAR_UNSIGNED__
   yes
@@ -4890,7 +4979,7 @@
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 4894 "configure"
+#line 4983 "configure"
 #include "confdefs.h"
 /* volatile prevents gcc2 from optimizing the test away on sparcs.  */
 #if !defined(__STDC__) || __STDC__ != 1
@@ -4900,7 +4989,7 @@
   volatile char c = 255; exit(c < 0);
 }
 EOF
-if { (eval echo configure:4904: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4993: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_char_unsigned=yes
 else
@@ -4924,12 +5013,12 @@
 fi
 
 echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:4928: checking for working const" >&5
+echo "configure:5017: checking for working const" >&5
 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4933 "configure"
+#line 5022 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -4978,7 +5067,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:4982: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5071: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_const=yes
 else
@@ -5001,16 +5090,16 @@
 
 works=no
 echo $ac_n "checking for working volatile""... $ac_c" 1>&6
-echo "configure:5005: checking for working volatile" >&5
+echo "configure:5094: checking for working volatile" >&5
 cat > conftest.$ac_ext <<EOF
-#line 5007 "configure"
+#line 5096 "configure"
 #include "confdefs.h"
 
 int main() {
 volatile int x; x = 0;
 ; return 0; }
 EOF
-if { (eval echo configure:5014: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5103: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   works=yes
 else
@@ -5027,16 +5116,16 @@
 
 works=no
 echo $ac_n "checking for working signed char""... $ac_c" 1>&6
-echo "configure:5031: checking for working signed char" >&5
+echo "configure:5120: checking for working signed char" >&5
 cat > conftest.$ac_ext <<EOF
-#line 5033 "configure"
+#line 5122 "configure"
 #include "confdefs.h"
 
 int main() {
 signed char c;
 ; return 0; }
 EOF
-if { (eval echo configure:5040: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5129: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   works=yes
 else
@@ -5053,16 +5142,16 @@
 
 have_prototypes=no
 echo $ac_n "checking for prototypes""... $ac_c" 1>&6
-echo "configure:5057: checking for prototypes" >&5
+echo "configure:5146: checking for prototypes" >&5
 cat > conftest.$ac_ext <<EOF
-#line 5059 "configure"
+#line 5148 "configure"
 #include "confdefs.h"
 int foo(int x) { return 0; }
 int main() {
 return foo(10);
 ; return 0; }
 EOF
-if { (eval echo configure:5066: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5155: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   cat >> confdefs.h <<\EOF
 #define HAVE_PROTOTYPES 1
@@ -5077,9 +5166,9 @@
 
 works=no
 echo $ac_n "checking for variable length prototypes and stdarg.h""... $ac_c" 1>&6
-echo "configure:5081: checking for variable length prototypes and stdarg.h" >&5
+echo "configure:5170: checking for variable length prototypes and stdarg.h" >&5
 cat > conftest.$ac_ext <<EOF
-#line 5083 "configure"
+#line 5172 "configure"
 #include "confdefs.h"
 
 #include <stdarg.h>
@@ -5096,7 +5185,7 @@
 return foo(10, "", 3.14);
 ; return 0; }
 EOF
-if { (eval echo configure:5100: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5189: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   cat >> confdefs.h <<\EOF
 #define HAVE_STDARG_PROTOTYPES 1
@@ -5112,16 +5201,16 @@
 if test "$have_prototypes" = yes; then
 bad_prototypes=no
 echo $ac_n "checking for bad exec* prototypes""... $ac_c" 1>&6
-echo "configure:5116: checking for bad exec* prototypes" >&5
+echo "configure:5205: checking for bad exec* prototypes" >&5
 cat > conftest.$ac_ext <<EOF
-#line 5118 "configure"
+#line 5207 "configure"
 #include "confdefs.h"
 #include <unistd.h>
 int main() {
 char **t;execve("@",t,t);
 ; return 0; }
 EOF
-if { (eval echo configure:5125: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5214: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   :
 else
   echo "configure: failed program was:" >&5
@@ -5138,12 +5227,12 @@
 
 bad_forward=no
 echo $ac_n "checking for bad static forward""... $ac_c" 1>&6
-echo "configure:5142: checking for bad static forward" >&5
+echo "configure:5231: checking for bad static forward" >&5
 if test "$cross_compiling" = yes; then
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 5147 "configure"
+#line 5236 "configure"
 #include "confdefs.h"
 
 struct s { int a; int b; };
@@ -5159,7 +5248,7 @@
 }
 
 EOF
-if { (eval echo configure:5163: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5252: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   :
 else
@@ -5178,9 +5267,9 @@
 
 va_list_is_array=no
 echo $ac_n "checking whether va_list is an array""... $ac_c" 1>&6
-echo "configure:5182: checking whether va_list is an array" >&5
+echo "configure:5271: checking whether va_list is an array" >&5
 cat > conftest.$ac_ext <<EOF
-#line 5184 "configure"
+#line 5273 "configure"
 #include "confdefs.h"
 
 #ifdef HAVE_STDARG_PROTOTYPES
@@ -5193,7 +5282,7 @@
 va_list list1, list2; list1 = list2;
 ; return 0; }
 EOF
-if { (eval echo configure:5197: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5286: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   :
 else
   echo "configure: failed program was:" >&5
@@ -5209,12 +5298,12 @@
 
 # sigh -- gethostbyname_r is a mess; it can have 3, 5 or 6 arguments :-(
 echo $ac_n "checking for gethostbyname_r""... $ac_c" 1>&6
-echo "configure:5213: checking for gethostbyname_r" >&5
+echo "configure:5302: checking for gethostbyname_r" >&5
 if eval "test \"`echo '$''{'ac_cv_func_gethostbyname_r'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5218 "configure"
+#line 5307 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char gethostbyname_r(); below.  */
@@ -5237,7 +5326,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:5241: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5330: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_gethostbyname_r=yes"
 else
@@ -5257,11 +5346,11 @@
 EOF
 
   echo $ac_n "checking gethostbyname_r with 6 args""... $ac_c" 1>&6
-echo "configure:5261: checking gethostbyname_r with 6 args" >&5
+echo "configure:5350: checking gethostbyname_r with 6 args" >&5
   OLD_CFLAGS=$CFLAGS
   CFLAGS="$CFLAGS $MY_CPPFLAGS $MY_THREAD_CPPFLAGS $MY_CFLAGS"
   cat > conftest.$ac_ext <<EOF
-#line 5265 "configure"
+#line 5354 "configure"
 #include "confdefs.h"
 
 #   include <netdb.h>
@@ -5278,7 +5367,7 @@
   
 ; return 0; }
 EOF
-if { (eval echo configure:5282: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5371: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   
     cat >> confdefs.h <<\EOF
@@ -5298,9 +5387,9 @@
   
     echo "$ac_t""no" 1>&6
     echo $ac_n "checking gethostbyname_r with 5 args""... $ac_c" 1>&6
-echo "configure:5302: checking gethostbyname_r with 5 args" >&5
+echo "configure:5391: checking gethostbyname_r with 5 args" >&5
     cat > conftest.$ac_ext <<EOF
-#line 5304 "configure"
+#line 5393 "configure"
 #include "confdefs.h"
 
 #     include <netdb.h>
@@ -5317,7 +5406,7 @@
     
 ; return 0; }
 EOF
-if { (eval echo configure:5321: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5410: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   
       cat >> confdefs.h <<\EOF
@@ -5337,9 +5426,9 @@
   
       echo "$ac_t""no" 1>&6
       echo $ac_n "checking gethostbyname_r with 3 args""... $ac_c" 1>&6
-echo "configure:5341: checking gethostbyname_r with 3 args" >&5
+echo "configure:5430: checking gethostbyname_r with 3 args" >&5
       cat > conftest.$ac_ext <<EOF
-#line 5343 "configure"
+#line 5432 "configure"
 #include "confdefs.h"
 
 #       include <netdb.h>
@@ -5354,7 +5443,7 @@
       
 ; return 0; }
 EOF
-if { (eval echo configure:5358: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5447: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   
         cat >> confdefs.h <<\EOF
@@ -5390,12 +5479,12 @@
   for ac_func in gethostbyname
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5394: checking for $ac_func" >&5
+echo "configure:5483: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5399 "configure"
+#line 5488 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -5418,7 +5507,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:5422: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5511: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -5456,12 +5545,12 @@
 
 # Linux requires this for correct f.p. operations
 echo $ac_n "checking for __fpu_control""... $ac_c" 1>&6
-echo "configure:5460: checking for __fpu_control" >&5
+echo "configure:5549: checking for __fpu_control" >&5
 if eval "test \"`echo '$''{'ac_cv_func___fpu_control'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5465 "configure"
+#line 5554 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char __fpu_control(); below.  */
@@ -5484,7 +5573,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:5488: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5577: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func___fpu_control=yes"
 else
@@ -5502,7 +5591,7 @@
 else
   echo "$ac_t""no" 1>&6
 echo $ac_n "checking for __fpu_control in -lieee""... $ac_c" 1>&6
-echo "configure:5506: checking for __fpu_control in -lieee" >&5
+echo "configure:5595: checking for __fpu_control in -lieee" >&5
 ac_lib_var=`echo ieee'_'__fpu_control | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -5510,7 +5599,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-lieee  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 5514 "configure"
+#line 5603 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -5521,7 +5610,7 @@
 __fpu_control()
 ; return 0; }
 EOF
-if { (eval echo configure:5525: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5614: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -5554,7 +5643,7 @@
 
 # Check for --with-fpectl
 echo $ac_n "checking for --with-fpectl""... $ac_c" 1>&6
-echo "configure:5558: checking for --with-fpectl" >&5
+echo "configure:5647: checking for --with-fpectl" >&5
 # Check whether --with-fpectl or --without-fpectl was given.
 if test "${with_fpectl+set}" = set; then
   withval="$with_fpectl"
@@ -5580,7 +5669,7 @@
 *) LIBM=-lm
 esac
 echo $ac_n "checking for --with-libm=STRING""... $ac_c" 1>&6
-echo "configure:5584: checking for --with-libm=STRING" >&5
+echo "configure:5673: checking for --with-libm=STRING" >&5
 # Check whether --with-libm or --without-libm was given.
 if test "${with_libm+set}" = set; then
   withval="$with_libm"
@@ -5601,7 +5690,7 @@
 # check for --with-libc=...
 
 echo $ac_n "checking for --with-libc=STRING""... $ac_c" 1>&6
-echo "configure:5605: checking for --with-libc=STRING" >&5
+echo "configure:5694: checking for --with-libc=STRING" >&5
 # Check whether --with-libc or --without-libc was given.
 if test "${with_libc+set}" = set; then
   withval="$with_libc"
@@ -5625,12 +5714,12 @@
 for ac_func in hypot
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5629: checking for $ac_func" >&5
+echo "configure:5718: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5634 "configure"
+#line 5723 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -5653,7 +5742,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:5657: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5746: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -5683,7 +5772,7 @@
 
 # check whether malloc(0) returns NULL or not
 echo $ac_n "checking what malloc(0) returns""... $ac_c" 1>&6
-echo "configure:5687: checking what malloc(0) returns" >&5
+echo "configure:5776: checking what malloc(0) returns" >&5
 if eval "test \"`echo '$''{'ac_cv_malloc_zero'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5691,7 +5780,7 @@
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 5695 "configure"
+#line 5784 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 #ifdef HAVE_STDLIB
@@ -5710,7 +5799,7 @@
 	exit(0);
 }
 EOF
-if { (eval echo configure:5714: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5803: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_malloc_zero=nonnull
 else
@@ -5736,17 +5825,17 @@
 # check for wchar.h
 ac_safe=`echo "wchar.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for wchar.h""... $ac_c" 1>&6
-echo "configure:5740: checking for wchar.h" >&5
+echo "configure:5829: checking for wchar.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5745 "configure"
+#line 5834 "configure"
 #include "confdefs.h"
 #include <wchar.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5750: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5839: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -5776,12 +5865,12 @@
 # check for usable wchar_t
 usable_wchar_t="unkown"
 echo $ac_n "checking for usable wchar_t""... $ac_c" 1>&6
-echo "configure:5780: checking for usable wchar_t" >&5
+echo "configure:5869: checking for usable wchar_t" >&5
 if test "$cross_compiling" = yes; then
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 5785 "configure"
+#line 5874 "configure"
 #include "confdefs.h"
 
 #include "wchar.h"
@@ -5795,7 +5884,7 @@
 }
 
 EOF
-if { (eval echo configure:5799: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5888: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   cat >> confdefs.h <<\EOF
 #define HAVE_USABLE_WCHAR_T 1
@@ -5814,14 +5903,14 @@
 
 # check for endianness
 echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
-echo "configure:5818: checking whether byte ordering is bigendian" >&5
+echo "configure:5907: checking whether byte ordering is bigendian" >&5
 if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_bigendian=unknown
 # See if sys/param.h defines the BYTE_ORDER macro.
 cat > conftest.$ac_ext <<EOF
-#line 5825 "configure"
+#line 5914 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/param.h>
@@ -5832,11 +5921,11 @@
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:5836: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5925: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   # It does; now see whether it defined to BIG_ENDIAN or not.
 cat > conftest.$ac_ext <<EOF
-#line 5840 "configure"
+#line 5929 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/param.h>
@@ -5847,7 +5936,7 @@
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:5851: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5940: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_bigendian=yes
 else
@@ -5867,7 +5956,7 @@
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 5871 "configure"
+#line 5960 "configure"
 #include "confdefs.h"
 main () {
   /* Are we little or big endian?  From Harbison&Steele.  */
@@ -5880,7 +5969,7 @@
   exit (u.c[sizeof (long) - 1] == 1);
 }
 EOF
-if { (eval echo configure:5884: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5973: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_bigendian=no
 else
@@ -5907,7 +5996,7 @@
 # Check whether right shifting a negative integer extends the sign bit
 # or fills with zeros (like the Cray J90, according to Tim Peters).
 echo $ac_n "checking whether right shift extends the sign bit""... $ac_c" 1>&6
-echo "configure:5911: checking whether right shift extends the sign bit" >&5
+echo "configure:6000: checking whether right shift extends the sign bit" >&5
 if eval "test \"`echo '$''{'ac_cv_rshift_extends_sign'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5916,7 +6005,7 @@
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 5920 "configure"
+#line 6009 "configure"
 #include "confdefs.h"
 
 int main()
@@ -5925,7 +6014,7 @@
 }
 
 EOF
-if { (eval echo configure:5929: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6018: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_rshift_extends_sign=yes
 else
@@ -5950,13 +6039,13 @@
 
 # check for getc_unlocked and related locking functions
 echo $ac_n "checking for getc_unlocked() and friends""... $ac_c" 1>&6
-echo "configure:5954: checking for getc_unlocked() and friends" >&5
+echo "configure:6043: checking for getc_unlocked() and friends" >&5
 if eval "test \"`echo '$''{'ac_cv_have_getc_unlocked'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   
 cat > conftest.$ac_ext <<EOF
-#line 5960 "configure"
+#line 6049 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 int main() {
@@ -5968,7 +6057,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:5972: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6061: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_have_getc_unlocked=yes
 else
@@ -5997,12 +6086,12 @@
 #endif
 EOF
 echo $ac_n "checking for socklen_t""... $ac_c" 1>&6
-echo "configure:6001: checking for socklen_t" >&5
+echo "configure:6090: checking for socklen_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_socklen_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6006 "configure"
+#line 6095 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -6031,7 +6120,7 @@
 
 
 echo $ac_n "checking for Modules/Setup""... $ac_c" 1>&6
-echo "configure:6035: checking for Modules/Setup" >&5
+echo "configure:6124: checking for Modules/Setup" >&5
 if test ! -f Modules/Setup ; then
     if test ! -d Modules ; then
         mkdir Modules
@@ -6205,6 +6294,8 @@
 s%@LDSHARED@%$LDSHARED%g
 s%@CCSHARED@%$CCSHARED%g
 s%@LINKFORSHARED@%$LINKFORSHARED%g
+s%@USE_NCURSES_MODULE@%$USE_NCURSES_MODULE%g
+s%@USE_READLINE_MODULE@%$USE_READLINE_MODULE%g
 s%@USE_THREAD_MODULE@%$USE_THREAD_MODULE%g
 s%@LDLAST@%$LDLAST%g
 s%@USE_GC_MODULE@%$USE_GC_MODULE%g
diff --git a/configure.in b/configure.in
index a27a6ed..34e456c 100644
--- a/configure.in
+++ b/configure.in
@@ -734,6 +734,21 @@
 LIBS="$withval $LIBS"
 ], AC_MSG_RESULT(no))
 
+# This is used to generate Setup.config
+AC_SUBST(USE_NCURSES_MODULE)
+AC_CHECK_LIB(ncurses, initscr, 
+	[USE_NCURSES_MODULE=""],
+	[USE_NCURSES_MODULE="#"],
+	-ltermcap)
+
+# This is used to generate Setup.config
+AC_SUBST(USE_READLINE_MODULE)
+AC_CHECK_LIB(readline, readline, 
+	[USE_READLINE_MODULE=""],
+	[USE_READLINE_MODULE="#"], 
+	-ltermcap)
+
+# This is used to generate Setup.config
 AC_SUBST(USE_THREAD_MODULE)
 USE_THREAD_MODULE=""