| #! /usr/bin/env python3 |
| |
| """ |
| Script to run Python regression tests. |
| |
| Run this script with -h or --help for documentation. |
| """ |
| |
| USAGE = """\ |
| python -m test [options] [test_name1 [test_name2 ...]] |
| python path/to/Lib/test/regrtest.py [options] [test_name1 [test_name2 ...]] |
| """ |
| |
| DESCRIPTION = """\ |
| Run Python regression tests. |
| |
| If no arguments or options are provided, finds all files matching |
| the pattern "test_*" in the Lib/test subdirectory and runs |
| them in alphabetical order (but see -M and -u, below, for exceptions). |
| |
| For more rigorous testing, it is useful to use the following |
| command line: |
| |
| python -E -Wd -m test [options] [test_name1 ...] |
| """ |
| |
| EPILOG = """\ |
| Additional option details: |
| |
| -r randomizes test execution order. You can use --randseed=int to provide a |
| int seed value for the randomizer; this is useful for reproducing troublesome |
| test orders. |
| |
| -s On the first invocation of regrtest using -s, the first test file found |
| or the first test file given on the command line is run, and the name of |
| the next test is recorded in a file named pynexttest. If run from the |
| Python build directory, pynexttest is located in the 'build' subdirectory, |
| otherwise it is located in tempfile.gettempdir(). On subsequent runs, |
| the test in pynexttest is run, and the next test is written to pynexttest. |
| When the last test has been run, pynexttest is deleted. In this way it |
| is possible to single step through the test files. This is useful when |
| doing memory analysis on the Python interpreter, which process tends to |
| consume too many resources to run the full regression test non-stop. |
| |
| -S is used to continue running tests after an aborted run. It will |
| maintain the order a standard run (ie, this assumes -r is not used). |
| This is useful after the tests have prematurely stopped for some external |
| reason and you want to start running from where you left off rather |
| than starting from the beginning. |
| |
| -f reads the names of tests from the file given as f's argument, one |
| or more test names per line. Whitespace is ignored. Blank lines and |
| lines beginning with '#' are ignored. This is especially useful for |
| whittling down failures involving interactions among tests. |
| |
| -L causes the leaks(1) command to be run just before exit if it exists. |
| leaks(1) is available on Mac OS X and presumably on some other |
| FreeBSD-derived systems. |
| |
| -R runs each test several times and examines sys.gettotalrefcount() to |
| see if the test appears to be leaking references. The argument should |
| be of the form stab:run:fname where 'stab' is the number of times the |
| test is run to let gettotalrefcount settle down, 'run' is the number |
| of times further it is run and 'fname' is the name of the file the |
| reports are written to. These parameters all have defaults (5, 4 and |
| "reflog.txt" respectively), and the minimal invocation is '-R :'. |
| |
| -M runs tests that require an exorbitant amount of memory. These tests |
| typically try to ascertain containers keep working when containing more than |
| 2 billion objects, which only works on 64-bit systems. There are also some |
| tests that try to exhaust the address space of the process, which only makes |
| sense on 32-bit systems with at least 2Gb of memory. The passed-in memlimit, |
| which is a string in the form of '2.5Gb', determines howmuch memory the |
| tests will limit themselves to (but they may go slightly over.) The number |
| shouldn't be more memory than the machine has (including swap memory). You |
| should also keep in mind that swap memory is generally much, much slower |
| than RAM, and setting memlimit to all available RAM or higher will heavily |
| tax the machine. On the other hand, it is no use running these tests with a |
| limit of less than 2.5Gb, and many require more than 20Gb. Tests that expect |
| to use more than memlimit memory will be skipped. The big-memory tests |
| generally run very, very long. |
| |
| -u is used to specify which special resource intensive tests to run, |
| such as those requiring large file support or network connectivity. |
| The argument is a comma-separated list of words indicating the |
| resources to test. Currently only the following are defined: |
| |
| all - Enable all special resources. |
| |
| none - Disable all special resources (this is the default). |
| |
| audio - Tests that use the audio device. (There are known |
| cases of broken audio drivers that can crash Python or |
| even the Linux kernel.) |
| |
| curses - Tests that use curses and will modify the terminal's |
| state and output modes. |
| |
| largefile - It is okay to run some test that may create huge |
| files. These tests can take a long time and may |
| consume >2GB of disk space temporarily. |
| |
| network - It is okay to run tests that use external network |
| resource, e.g. testing SSL support for sockets. |
| |
| decimal - Test the decimal module against a large suite that |
| verifies compliance with standards. |
| |
| cpu - Used for certain CPU-heavy tests. |
| |
| subprocess Run all tests for the subprocess module. |
| |
| urlfetch - It is okay to download files required on testing. |
| |
| gui - Run tests that require a running GUI. |
| |
| To enable all resources except one, use '-uall,-<resource>'. For |
| example, to run all the tests except for the gui tests, give the |
| option '-uall,-gui'. |
| """ |
| |
| # We import importlib *ASAP* in order to test #15386 |
| import importlib |
| |
| import argparse |
| import builtins |
| import faulthandler |
| import io |
| import json |
| import locale |
| import logging |
| import os |
| import platform |
| import random |
| import re |
| import shutil |
| import signal |
| import sys |
| import sysconfig |
| import tempfile |
| import time |
| import traceback |
| import unittest |
| import warnings |
| from inspect import isabstract |
| |
| try: |
| import threading |
| except ImportError: |
| threading = None |
| try: |
| import _multiprocessing, multiprocessing.process |
| except ImportError: |
| multiprocessing = None |
| |
| |
| # Some times __path__ and __file__ are not absolute (e.g. while running from |
| # Lib/) and, if we change the CWD to run the tests in a temporary dir, some |
| # imports might fail. This affects only the modules imported before os.chdir(). |
| # These modules are searched first in sys.path[0] (so '' -- the CWD) and if |
| # they are found in the CWD their __file__ and __path__ will be relative (this |
| # happens before the chdir). All the modules imported after the chdir, are |
| # not found in the CWD, and since the other paths in sys.path[1:] are absolute |
| # (site.py absolutize them), the __file__ and __path__ will be absolute too. |
| # Therefore it is necessary to absolutize manually the __file__ and __path__ of |
| # the packages to prevent later imports to fail when the CWD is different. |
| for module in sys.modules.values(): |
| if hasattr(module, '__path__'): |
| module.__path__ = [os.path.abspath(path) for path in module.__path__] |
| if hasattr(module, '__file__'): |
| module.__file__ = os.path.abspath(module.__file__) |
| |
| |
| # MacOSX (a.k.a. Darwin) has a default stack size that is too small |
| # for deeply recursive regular expressions. We see this as crashes in |
| # the Python test suite when running test_re.py and test_sre.py. The |
| # fix is to set the stack limit to 2048. |
| # This approach may also be useful for other Unixy platforms that |
| # suffer from small default stack limits. |
| if sys.platform == 'darwin': |
| try: |
| import resource |
| except ImportError: |
| pass |
| else: |
| soft, hard = resource.getrlimit(resource.RLIMIT_STACK) |
| newsoft = min(hard, max(soft, 1024*2048)) |
| resource.setrlimit(resource.RLIMIT_STACK, (newsoft, hard)) |
| |
| # Test result constants. |
| PASSED = 1 |
| FAILED = 0 |
| ENV_CHANGED = -1 |
| SKIPPED = -2 |
| RESOURCE_DENIED = -3 |
| INTERRUPTED = -4 |
| CHILD_ERROR = -5 # error in a child process |
| |
| from test import support |
| |
| RESOURCE_NAMES = ('audio', 'curses', 'largefile', 'network', |
| 'decimal', 'cpu', 'subprocess', 'urlfetch', 'gui') |
| |
| # When tests are run from the Python build directory, it is best practice |
| # to keep the test files in a subfolder. This eases the cleanup of leftover |
| # files using the "make distclean" command. |
| if sysconfig.is_python_build(): |
| TEMPDIR = os.path.join(sysconfig.get_config_var('srcdir'), 'build') |
| else: |
| TEMPDIR = tempfile.gettempdir() |
| TEMPDIR = os.path.abspath(TEMPDIR) |
| |
| class _ArgParser(argparse.ArgumentParser): |
| |
| def error(self, message): |
| super().error(message + "\nPass -h or --help for complete help.") |
| |
| def _create_parser(): |
| # Set prog to prevent the uninformative "__main__.py" from displaying in |
| # error messages when using "python -m test ...". |
| parser = _ArgParser(prog='regrtest.py', |
| usage=USAGE, |
| description=DESCRIPTION, |
| epilog=EPILOG, |
| add_help=False, |
| formatter_class=argparse.RawDescriptionHelpFormatter) |
| |
| # Arguments with this clause added to its help are described further in |
| # the epilog's "Additional option details" section. |
| more_details = ' See the section at bottom for more details.' |
| |
| group = parser.add_argument_group('General options') |
| # We add help explicitly to control what argument group it renders under. |
| group.add_argument('-h', '--help', action='help', |
| help='show this help message and exit') |
| group.add_argument('--timeout', metavar='TIMEOUT', type=float, |
| help='dump the traceback and exit if a test takes ' |
| 'more than TIMEOUT seconds; disabled if TIMEOUT ' |
| 'is negative or equals to zero') |
| group.add_argument('--wait', action='store_true', |
| help='wait for user input, e.g., allow a debugger ' |
| 'to be attached') |
| group.add_argument('--slaveargs', metavar='ARGS') |
| group.add_argument('-S', '--start', metavar='START', |
| help='the name of the test at which to start.' + |
| more_details) |
| |
| group = parser.add_argument_group('Verbosity') |
| group.add_argument('-v', '--verbose', action='count', |
| help='run tests in verbose mode with output to stdout') |
| group.add_argument('-w', '--verbose2', action='store_true', |
| help='re-run failed tests in verbose mode') |
| group.add_argument('-W', '--verbose3', action='store_true', |
| help='display test output on failure') |
| group.add_argument('-q', '--quiet', action='store_true', |
| help='no output unless one or more tests fail') |
| group.add_argument('-o', '--slow', action='store_true', dest='print_slow', |
| help='print the slowest 10 tests') |
| group.add_argument('--header', action='store_true', |
| help='print header with interpreter info') |
| |
| group = parser.add_argument_group('Selecting tests') |
| group.add_argument('-r', '--randomize', action='store_true', |
| help='randomize test execution order.' + more_details) |
| group.add_argument('--randseed', metavar='SEED', |
| dest='random_seed', type=int, |
| help='pass a random seed to reproduce a previous ' |
| 'random run') |
| group.add_argument('-f', '--fromfile', metavar='FILE', |
| help='read names of tests to run from a file.' + |
| more_details) |
| group.add_argument('-x', '--exclude', action='store_true', |
| help='arguments are tests to *exclude*') |
| group.add_argument('-s', '--single', action='store_true', |
| help='single step through a set of tests.' + |
| more_details) |
| group.add_argument('-m', '--match', metavar='PAT', |
| dest='match_tests', |
| help='match test cases and methods with glob pattern PAT') |
| group.add_argument('-G', '--failfast', action='store_true', |
| help='fail as soon as a test fails (only with -v or -W)') |
| group.add_argument('-u', '--use', metavar='RES1,RES2,...', |
| action='append', type=resources_list, |
| help='specify which special resource intensive tests ' |
| 'to run.' + more_details) |
| group.add_argument('-M', '--memlimit', metavar='LIMIT', |
| help='run very large memory-consuming tests.' + |
| more_details) |
| group.add_argument('--testdir', metavar='DIR', |
| type=relative_filename, |
| help='execute test files in the specified directory ' |
| '(instead of the Python stdlib test suite)') |
| |
| group = parser.add_argument_group('Special runs') |
| group.add_argument('-l', '--findleaks', action='store_true', |
| help='if GC is available detect tests that leak memory') |
| group.add_argument('-L', '--runleaks', action='store_true', |
| help='run the leaks(1) command just before exit.' + |
| more_details) |
| group.add_argument('-R', '--huntrleaks', metavar='RUNCOUNTS', |
| type=huntrleaks, |
| help='search for reference leaks (needs debug build, ' |
| 'very slow).' + more_details) |
| group.add_argument('-j', '--multiprocess', metavar='PROCESSES', |
| dest='use_mp', type=int, |
| help='run PROCESSES processes at once') |
| group.add_argument('-T', '--coverage', action='store_true', |
| dest='trace', |
| help='turn on code coverage tracing using the trace ' |
| 'module') |
| group.add_argument('-D', '--coverdir', metavar='DIR', |
| type=relative_filename, |
| help='directory where coverage files are put') |
| group.add_argument('-N', '--nocoverdir', |
| action='store_const', const=None, dest='coverdir', |
| help='put coverage files alongside modules') |
| group.add_argument('-t', '--threshold', metavar='THRESHOLD', |
| type=int, |
| help='call gc.set_threshold(THRESHOLD)') |
| group.add_argument('-n', '--nowindows', action='store_true', |
| help='suppress error message boxes on Windows') |
| group.add_argument('-F', '--forever', action='store_true', |
| help='run the specified tests in a loop, until an ' |
| 'error happens') |
| |
| parser.add_argument('args', nargs=argparse.REMAINDER, |
| help=argparse.SUPPRESS) |
| |
| return parser |
| |
| def relative_filename(string): |
| # CWD is replaced with a temporary dir before calling main(), so we |
| # join it with the saved CWD so it ends up where the user expects. |
| return os.path.join(support.SAVEDCWD, string) |
| |
| def huntrleaks(string): |
| args = string.split(':') |
| if len(args) not in (2, 3): |
| raise argparse.ArgumentTypeError( |
| 'needs 2 or 3 colon-separated arguments') |
| nwarmup = int(args[0]) if args[0] else 5 |
| ntracked = int(args[1]) if args[1] else 4 |
| fname = args[2] if len(args) > 2 and args[2] else 'reflog.txt' |
| return nwarmup, ntracked, fname |
| |
| def resources_list(string): |
| u = [x.lower() for x in string.split(',')] |
| for r in u: |
| if r == 'all' or r == 'none': |
| continue |
| if r[0] == '-': |
| r = r[1:] |
| if r not in RESOURCE_NAMES: |
| raise argparse.ArgumentTypeError('invalid resource: ' + r) |
| return u |
| |
| def _parse_args(args, **kwargs): |
| # Defaults |
| ns = argparse.Namespace(testdir=None, verbose=0, quiet=False, |
| exclude=False, single=False, randomize=False, fromfile=None, |
| findleaks=False, use_resources=None, trace=False, coverdir='coverage', |
| runleaks=False, huntrleaks=False, verbose2=False, print_slow=False, |
| random_seed=None, use_mp=None, verbose3=False, forever=False, |
| header=False, failfast=False, match_tests=None) |
| for k, v in kwargs.items(): |
| if not hasattr(ns, k): |
| raise TypeError('%r is an invalid keyword argument ' |
| 'for this function' % k) |
| setattr(ns, k, v) |
| if ns.use_resources is None: |
| ns.use_resources = [] |
| |
| parser = _create_parser() |
| parser.parse_args(args=args, namespace=ns) |
| |
| if ns.single and ns.fromfile: |
| parser.error("-s and -f don't go together!") |
| if ns.use_mp and ns.trace: |
| parser.error("-T and -j don't go together!") |
| if ns.use_mp and ns.findleaks: |
| parser.error("-l and -j don't go together!") |
| if ns.use_mp and ns.memlimit: |
| parser.error("-M and -j don't go together!") |
| if ns.failfast and not (ns.verbose or ns.verbose3): |
| parser.error("-G/--failfast needs either -v or -W") |
| |
| if ns.quiet: |
| ns.verbose = 0 |
| if ns.timeout is not None: |
| if hasattr(faulthandler, 'dump_traceback_later'): |
| if ns.timeout <= 0: |
| ns.timeout = None |
| else: |
| print("Warning: The timeout option requires " |
| "faulthandler.dump_traceback_later") |
| ns.timeout = None |
| if ns.use_mp is not None: |
| if ns.use_mp <= 0: |
| # Use all cores + extras for tests that like to sleep |
| ns.use_mp = 2 + (os.cpu_count() or 1) |
| if ns.use_mp == 1: |
| ns.use_mp = None |
| if ns.use: |
| for a in ns.use: |
| for r in a: |
| if r == 'all': |
| ns.use_resources[:] = RESOURCE_NAMES |
| continue |
| if r == 'none': |
| del ns.use_resources[:] |
| continue |
| remove = False |
| if r[0] == '-': |
| remove = True |
| r = r[1:] |
| if remove: |
| if r in ns.use_resources: |
| ns.use_resources.remove(r) |
| elif r not in ns.use_resources: |
| ns.use_resources.append(r) |
| if ns.random_seed is not None: |
| ns.randomize = True |
| |
| return ns |
| |
| |
| def run_test_in_subprocess(testname, ns): |
| """Run the given test in a subprocess with --slaveargs. |
| |
| ns is the option Namespace parsed from command-line arguments. regrtest |
| is invoked in a subprocess with the --slaveargs argument; when the |
| subprocess exits, its return code, stdout and stderr are returned as a |
| 3-tuple. |
| """ |
| from subprocess import Popen, PIPE |
| base_cmd = ([sys.executable] + support.args_from_interpreter_flags() + |
| ['-X', 'faulthandler', '-m', 'test.regrtest']) |
| |
| slaveargs = ( |
| (testname, ns.verbose, ns.quiet), |
| dict(huntrleaks=ns.huntrleaks, |
| use_resources=ns.use_resources, |
| output_on_failure=ns.verbose3, |
| timeout=ns.timeout, failfast=ns.failfast, |
| match_tests=ns.match_tests)) |
| # Running the child from the same working directory as regrtest's original |
| # invocation ensures that TEMPDIR for the child is the same when |
| # sysconfig.is_python_build() is true. See issue 15300. |
| popen = Popen(base_cmd + ['--slaveargs', json.dumps(slaveargs)], |
| stdout=PIPE, stderr=PIPE, |
| universal_newlines=True, |
| close_fds=(os.name != 'nt'), |
| cwd=support.SAVEDCWD) |
| stdout, stderr = popen.communicate() |
| retcode = popen.wait() |
| return retcode, stdout, stderr |
| |
| |
| def main(tests=None, **kwargs): |
| """Execute a test suite. |
| |
| This also parses command-line options and modifies its behavior |
| accordingly. |
| |
| tests -- a list of strings containing test names (optional) |
| testdir -- the directory in which to look for tests (optional) |
| |
| Users other than the Python test suite will certainly want to |
| specify testdir; if it's omitted, the directory containing the |
| Python test suite is searched for. |
| |
| If the tests argument is omitted, the tests listed on the |
| command-line will be used. If that's empty, too, then all *.py |
| files beginning with test_ will be used. |
| |
| The other default arguments (verbose, quiet, exclude, |
| single, randomize, findleaks, use_resources, trace, coverdir, |
| print_slow, and random_seed) allow programmers calling main() |
| directly to set the values that would normally be set by flags |
| on the command line. |
| """ |
| # Display the Python traceback on fatal errors (e.g. segfault) |
| faulthandler.enable(all_threads=True) |
| |
| # Display the Python traceback on SIGALRM or SIGUSR1 signal |
| signals = [] |
| if hasattr(signal, 'SIGALRM'): |
| signals.append(signal.SIGALRM) |
| if hasattr(signal, 'SIGUSR1'): |
| signals.append(signal.SIGUSR1) |
| for signum in signals: |
| faulthandler.register(signum, chain=True) |
| |
| replace_stdout() |
| |
| support.record_original_stdout(sys.stdout) |
| |
| ns = _parse_args(sys.argv[1:], **kwargs) |
| |
| if ns.huntrleaks: |
| # Avoid false positives due to various caches |
| # filling slowly with random data: |
| warm_caches() |
| if ns.memlimit is not None: |
| support.set_memlimit(ns.memlimit) |
| if ns.threshold is not None: |
| import gc |
| gc.set_threshold(ns.threshold) |
| if ns.nowindows: |
| import msvcrt |
| msvcrt.SetErrorMode(msvcrt.SEM_FAILCRITICALERRORS| |
| msvcrt.SEM_NOALIGNMENTFAULTEXCEPT| |
| msvcrt.SEM_NOGPFAULTERRORBOX| |
| msvcrt.SEM_NOOPENFILEERRORBOX) |
| try: |
| msvcrt.CrtSetReportMode |
| except AttributeError: |
| # release build |
| pass |
| else: |
| for m in [msvcrt.CRT_WARN, msvcrt.CRT_ERROR, msvcrt.CRT_ASSERT]: |
| msvcrt.CrtSetReportMode(m, msvcrt.CRTDBG_MODE_FILE) |
| msvcrt.CrtSetReportFile(m, msvcrt.CRTDBG_FILE_STDERR) |
| if ns.wait: |
| input("Press any key to continue...") |
| |
| if ns.slaveargs is not None: |
| args, kwargs = json.loads(ns.slaveargs) |
| if kwargs.get('huntrleaks'): |
| unittest.BaseTestSuite._cleanup = False |
| try: |
| result = runtest(*args, **kwargs) |
| except KeyboardInterrupt: |
| result = INTERRUPTED, '' |
| except BaseException as e: |
| traceback.print_exc() |
| result = CHILD_ERROR, str(e) |
| sys.stdout.flush() |
| print() # Force a newline (just in case) |
| print(json.dumps(result)) |
| sys.exit(0) |
| |
| good = [] |
| bad = [] |
| skipped = [] |
| resource_denieds = [] |
| environment_changed = [] |
| interrupted = False |
| |
| if ns.findleaks: |
| try: |
| import gc |
| except ImportError: |
| print('No GC available, disabling findleaks.') |
| ns.findleaks = False |
| else: |
| # Uncomment the line below to report garbage that is not |
| # freeable by reference counting alone. By default only |
| # garbage that is not collectable by the GC is reported. |
| #gc.set_debug(gc.DEBUG_SAVEALL) |
| found_garbage = [] |
| |
| if ns.huntrleaks: |
| unittest.BaseTestSuite._cleanup = False |
| |
| if ns.single: |
| filename = os.path.join(TEMPDIR, 'pynexttest') |
| try: |
| with open(filename, 'r') as fp: |
| next_test = fp.read().strip() |
| tests = [next_test] |
| except OSError: |
| pass |
| |
| if ns.fromfile: |
| tests = [] |
| with open(os.path.join(support.SAVEDCWD, ns.fromfile)) as fp: |
| count_pat = re.compile(r'\[\s*\d+/\s*\d+\]') |
| for line in fp: |
| line = count_pat.sub('', line) |
| guts = line.split() # assuming no test has whitespace in its name |
| if guts and not guts[0].startswith('#'): |
| tests.extend(guts) |
| |
| # Strip .py extensions. |
| removepy(ns.args) |
| removepy(tests) |
| |
| stdtests = STDTESTS[:] |
| nottests = NOTTESTS.copy() |
| if ns.exclude: |
| for arg in ns.args: |
| if arg in stdtests: |
| stdtests.remove(arg) |
| nottests.add(arg) |
| ns.args = [] |
| |
| # For a partial run, we do not need to clutter the output. |
| if ns.verbose or ns.header or not (ns.quiet or ns.single or tests or ns.args): |
| # Print basic platform information |
| print("==", platform.python_implementation(), *sys.version.split()) |
| print("== ", platform.platform(aliased=True), |
| "%s-endian" % sys.byteorder) |
| print("== ", "hash algorithm:", sys.hash_info.algorithm, |
| "64bit" if sys.maxsize > 2**32 else "32bit") |
| print("== ", os.getcwd()) |
| print("Testing with flags:", sys.flags) |
| |
| # if testdir is set, then we are not running the python tests suite, so |
| # don't add default tests to be executed or skipped (pass empty values) |
| if ns.testdir: |
| alltests = findtests(ns.testdir, list(), set()) |
| else: |
| alltests = findtests(ns.testdir, stdtests, nottests) |
| |
| selected = tests or ns.args or alltests |
| if ns.single: |
| selected = selected[:1] |
| try: |
| next_single_test = alltests[alltests.index(selected[0])+1] |
| except IndexError: |
| next_single_test = None |
| # Remove all the selected tests that precede start if it's set. |
| if ns.start: |
| try: |
| del selected[:selected.index(ns.start)] |
| except ValueError: |
| print("Couldn't find starting test (%s), using all tests" % ns.start) |
| if ns.randomize: |
| if ns.random_seed is None: |
| ns.random_seed = random.randrange(10000000) |
| random.seed(ns.random_seed) |
| print("Using random seed", ns.random_seed) |
| random.shuffle(selected) |
| if ns.trace: |
| import trace, tempfile |
| tracer = trace.Trace(ignoredirs=[sys.base_prefix, sys.base_exec_prefix, |
| tempfile.gettempdir()], |
| trace=False, count=True) |
| |
| test_times = [] |
| support.verbose = ns.verbose # Tell tests to be moderately quiet |
| support.use_resources = ns.use_resources |
| save_modules = sys.modules.keys() |
| |
| def accumulate_result(test, result): |
| ok, test_time = result |
| test_times.append((test_time, test)) |
| if ok == PASSED: |
| good.append(test) |
| elif ok == FAILED: |
| bad.append(test) |
| elif ok == ENV_CHANGED: |
| environment_changed.append(test) |
| elif ok == SKIPPED: |
| skipped.append(test) |
| elif ok == RESOURCE_DENIED: |
| skipped.append(test) |
| resource_denieds.append(test) |
| |
| if ns.forever: |
| def test_forever(tests=list(selected)): |
| while True: |
| for test in tests: |
| yield test |
| if bad: |
| return |
| tests = test_forever() |
| test_count = '' |
| test_count_width = 3 |
| else: |
| tests = iter(selected) |
| test_count = '/{}'.format(len(selected)) |
| test_count_width = len(test_count) - 1 |
| |
| if ns.use_mp: |
| try: |
| from threading import Thread |
| except ImportError: |
| print("Multiprocess option requires thread support") |
| sys.exit(2) |
| from queue import Queue |
| debug_output_pat = re.compile(r"\[\d+ refs, \d+ blocks\]$") |
| output = Queue() |
| pending = MultiprocessTests(tests) |
| def work(): |
| # A worker thread. |
| try: |
| while True: |
| try: |
| test = next(pending) |
| except StopIteration: |
| output.put((None, None, None, None)) |
| return |
| retcode, stdout, stderr = run_test_in_subprocess(test, ns) |
| # Strip last refcount output line if it exists, since it |
| # comes from the shutdown of the interpreter in the subcommand. |
| stderr = debug_output_pat.sub("", stderr) |
| stdout, _, result = stdout.strip().rpartition("\n") |
| if retcode != 0: |
| result = (CHILD_ERROR, "Exit code %s" % retcode) |
| output.put((test, stdout.rstrip(), stderr.rstrip(), result)) |
| return |
| if not result: |
| output.put((None, None, None, None)) |
| return |
| result = json.loads(result) |
| output.put((test, stdout.rstrip(), stderr.rstrip(), result)) |
| except BaseException: |
| output.put((None, None, None, None)) |
| raise |
| workers = [Thread(target=work) for i in range(ns.use_mp)] |
| for worker in workers: |
| worker.start() |
| finished = 0 |
| test_index = 1 |
| try: |
| while finished < ns.use_mp: |
| test, stdout, stderr, result = output.get() |
| if test is None: |
| finished += 1 |
| continue |
| accumulate_result(test, result) |
| if not ns.quiet: |
| fmt = "[{1:{0}}{2}/{3}] {4}" if bad else "[{1:{0}}{2}] {4}" |
| print(fmt.format( |
| test_count_width, test_index, test_count, |
| len(bad), test)) |
| if stdout: |
| print(stdout) |
| if stderr: |
| print(stderr, file=sys.stderr) |
| sys.stdout.flush() |
| sys.stderr.flush() |
| if result[0] == INTERRUPTED: |
| raise KeyboardInterrupt |
| if result[0] == CHILD_ERROR: |
| raise Exception("Child error on {}: {}".format(test, result[1])) |
| test_index += 1 |
| except KeyboardInterrupt: |
| interrupted = True |
| pending.interrupted = True |
| for worker in workers: |
| worker.join() |
| else: |
| for test_index, test in enumerate(tests, 1): |
| if not ns.quiet: |
| fmt = "[{1:{0}}{2}/{3}] {4}" if bad else "[{1:{0}}{2}] {4}" |
| print(fmt.format( |
| test_count_width, test_index, test_count, len(bad), test)) |
| sys.stdout.flush() |
| if ns.trace: |
| # If we're tracing code coverage, then we don't exit with status |
| # if on a false return value from main. |
| tracer.runctx('runtest(test, ns.verbose, ns.quiet, timeout=ns.timeout)', |
| globals=globals(), locals=vars()) |
| else: |
| try: |
| result = runtest(test, ns.verbose, ns.quiet, |
| ns.huntrleaks, |
| output_on_failure=ns.verbose3, |
| timeout=ns.timeout, failfast=ns.failfast, |
| match_tests=ns.match_tests) |
| accumulate_result(test, result) |
| except KeyboardInterrupt: |
| interrupted = True |
| break |
| except: |
| raise |
| if ns.findleaks: |
| gc.collect() |
| if gc.garbage: |
| print("Warning: test created", len(gc.garbage), end=' ') |
| print("uncollectable object(s).") |
| # move the uncollectable objects somewhere so we don't see |
| # them again |
| found_garbage.extend(gc.garbage) |
| del gc.garbage[:] |
| # Unload the newly imported modules (best effort finalization) |
| for module in sys.modules.keys(): |
| if module not in save_modules and module.startswith("test."): |
| support.unload(module) |
| |
| if interrupted: |
| # print a newline after ^C |
| print() |
| print("Test suite interrupted by signal SIGINT.") |
| omitted = set(selected) - set(good) - set(bad) - set(skipped) |
| print(count(len(omitted), "test"), "omitted:") |
| printlist(omitted) |
| if good and not ns.quiet: |
| if not bad and not skipped and not interrupted and len(good) > 1: |
| print("All", end=' ') |
| print(count(len(good), "test"), "OK.") |
| if ns.print_slow: |
| test_times.sort(reverse=True) |
| print("10 slowest tests:") |
| for time, test in test_times[:10]: |
| print("%s: %.1fs" % (test, time)) |
| if bad: |
| print(count(len(bad), "test"), "failed:") |
| printlist(bad) |
| if environment_changed: |
| print("{} altered the execution environment:".format( |
| count(len(environment_changed), "test"))) |
| printlist(environment_changed) |
| if skipped and not ns.quiet: |
| print(count(len(skipped), "test"), "skipped:") |
| printlist(skipped) |
| |
| if ns.verbose2 and bad: |
| print("Re-running failed tests in verbose mode") |
| for test in bad[:]: |
| print("Re-running test %r in verbose mode" % test) |
| sys.stdout.flush() |
| try: |
| ns.verbose = True |
| ok = runtest(test, True, ns.quiet, ns.huntrleaks, |
| timeout=ns.timeout) |
| except KeyboardInterrupt: |
| # print a newline separate from the ^C |
| print() |
| break |
| else: |
| if ok[0] in {PASSED, ENV_CHANGED, SKIPPED, RESOURCE_DENIED}: |
| bad.remove(test) |
| else: |
| if bad: |
| print(count(len(bad), 'test'), "failed again:") |
| printlist(bad) |
| |
| if ns.single: |
| if next_single_test: |
| with open(filename, 'w') as fp: |
| fp.write(next_single_test + '\n') |
| else: |
| os.unlink(filename) |
| |
| if ns.trace: |
| r = tracer.results() |
| r.write_results(show_missing=True, summary=True, coverdir=ns.coverdir) |
| |
| if ns.runleaks: |
| os.system("leaks %d" % os.getpid()) |
| |
| sys.exit(len(bad) > 0 or interrupted) |
| |
| |
| # small set of tests to determine if we have a basically functioning interpreter |
| # (i.e. if any of these fail, then anything else is likely to follow) |
| STDTESTS = [ |
| 'test_grammar', |
| 'test_opcodes', |
| 'test_dict', |
| 'test_builtin', |
| 'test_exceptions', |
| 'test_types', |
| 'test_unittest', |
| 'test_doctest', |
| 'test_doctest2', |
| 'test_support' |
| ] |
| |
| # set of tests that we don't want to be executed when using regrtest |
| NOTTESTS = set() |
| |
| def findtests(testdir=None, stdtests=STDTESTS, nottests=NOTTESTS): |
| """Return a list of all applicable test modules.""" |
| testdir = findtestdir(testdir) |
| names = os.listdir(testdir) |
| tests = [] |
| others = set(stdtests) | nottests |
| for name in names: |
| mod, ext = os.path.splitext(name) |
| if mod[:5] == "test_" and ext in (".py", "") and mod not in others: |
| tests.append(mod) |
| return stdtests + sorted(tests) |
| |
| # We do not use a generator so multiple threads can call next(). |
| class MultiprocessTests(object): |
| |
| """A thread-safe iterator over tests for multiprocess mode.""" |
| |
| def __init__(self, tests): |
| self.interrupted = False |
| self.lock = threading.Lock() |
| self.tests = tests |
| |
| def __iter__(self): |
| return self |
| |
| def __next__(self): |
| with self.lock: |
| if self.interrupted: |
| raise StopIteration('tests interrupted') |
| return next(self.tests) |
| |
| def replace_stdout(): |
| """Set stdout encoder error handler to backslashreplace (as stderr error |
| handler) to avoid UnicodeEncodeError when printing a traceback""" |
| import atexit |
| |
| stdout = sys.stdout |
| sys.stdout = open(stdout.fileno(), 'w', |
| encoding=stdout.encoding, |
| errors="backslashreplace", |
| closefd=False, |
| newline='\n') |
| |
| def restore_stdout(): |
| sys.stdout.close() |
| sys.stdout = stdout |
| atexit.register(restore_stdout) |
| |
| def runtest(test, verbose, quiet, |
| huntrleaks=False, use_resources=None, |
| output_on_failure=False, failfast=False, match_tests=None, |
| timeout=None): |
| """Run a single test. |
| |
| test -- the name of the test |
| verbose -- if true, print more messages |
| quiet -- if true, don't print 'skipped' messages (probably redundant) |
| huntrleaks -- run multiple times to test for leaks; requires a debug |
| build; a triple corresponding to -R's three arguments |
| use_resources -- list of extra resources to use |
| output_on_failure -- if true, display test output on failure |
| timeout -- dump the traceback and exit if a test takes more than |
| timeout seconds |
| failfast, match_tests -- See regrtest command-line flags for these. |
| |
| Returns the tuple result, test_time, where result is one of the constants: |
| INTERRUPTED KeyboardInterrupt when run under -j |
| RESOURCE_DENIED test skipped because resource denied |
| SKIPPED test skipped for some other reason |
| ENV_CHANGED test failed because it changed the execution environment |
| FAILED test failed |
| PASSED test passed |
| """ |
| |
| if use_resources is not None: |
| support.use_resources = use_resources |
| use_timeout = (timeout is not None) |
| if use_timeout: |
| faulthandler.dump_traceback_later(timeout, exit=True) |
| try: |
| support.match_tests = match_tests |
| if failfast: |
| support.failfast = True |
| if output_on_failure: |
| support.verbose = True |
| |
| # Reuse the same instance to all calls to runtest(). Some |
| # tests keep a reference to sys.stdout or sys.stderr |
| # (eg. test_argparse). |
| if runtest.stringio is None: |
| stream = io.StringIO() |
| runtest.stringio = stream |
| else: |
| stream = runtest.stringio |
| stream.seek(0) |
| stream.truncate() |
| |
| orig_stdout = sys.stdout |
| orig_stderr = sys.stderr |
| try: |
| sys.stdout = stream |
| sys.stderr = stream |
| result = runtest_inner(test, verbose, quiet, huntrleaks, |
| display_failure=False) |
| if result[0] == FAILED: |
| output = stream.getvalue() |
| orig_stderr.write(output) |
| orig_stderr.flush() |
| finally: |
| sys.stdout = orig_stdout |
| sys.stderr = orig_stderr |
| else: |
| support.verbose = verbose # Tell tests to be moderately quiet |
| result = runtest_inner(test, verbose, quiet, huntrleaks, |
| display_failure=not verbose) |
| return result |
| finally: |
| if use_timeout: |
| faulthandler.cancel_dump_traceback_later() |
| cleanup_test_droppings(test, verbose) |
| runtest.stringio = None |
| |
| # Unit tests are supposed to leave the execution environment unchanged |
| # once they complete. But sometimes tests have bugs, especially when |
| # tests fail, and the changes to environment go on to mess up other |
| # tests. This can cause issues with buildbot stability, since tests |
| # are run in random order and so problems may appear to come and go. |
| # There are a few things we can save and restore to mitigate this, and |
| # the following context manager handles this task. |
| |
| class saved_test_environment: |
| """Save bits of the test environment and restore them at block exit. |
| |
| with saved_test_environment(testname, verbose, quiet): |
| #stuff |
| |
| Unless quiet is True, a warning is printed to stderr if any of |
| the saved items was changed by the test. The attribute 'changed' |
| is initially False, but is set to True if a change is detected. |
| |
| If verbose is more than 1, the before and after state of changed |
| items is also printed. |
| """ |
| |
| changed = False |
| |
| def __init__(self, testname, verbose=0, quiet=False): |
| self.testname = testname |
| self.verbose = verbose |
| self.quiet = quiet |
| |
| # To add things to save and restore, add a name XXX to the resources list |
| # and add corresponding get_XXX/restore_XXX functions. get_XXX should |
| # return the value to be saved and compared against a second call to the |
| # get function when test execution completes. restore_XXX should accept |
| # the saved value and restore the resource using it. It will be called if |
| # and only if a change in the value is detected. |
| # |
| # Note: XXX will have any '.' replaced with '_' characters when determining |
| # the corresponding method names. |
| |
| resources = ('sys.argv', 'cwd', 'sys.stdin', 'sys.stdout', 'sys.stderr', |
| 'os.environ', 'sys.path', 'sys.path_hooks', '__import__', |
| 'warnings.filters', 'asyncore.socket_map', |
| 'logging._handlers', 'logging._handlerList', 'sys.gettrace', |
| 'sys.warnoptions', |
| # multiprocessing.process._cleanup() may release ref |
| # to a thread, so check processes first. |
| 'multiprocessing.process._dangling', 'threading._dangling', |
| 'sysconfig._CONFIG_VARS', 'sysconfig._INSTALL_SCHEMES', |
| 'files', 'locale', 'warnings.showwarning', |
| ) |
| |
| def get_sys_argv(self): |
| return id(sys.argv), sys.argv, sys.argv[:] |
| def restore_sys_argv(self, saved_argv): |
| sys.argv = saved_argv[1] |
| sys.argv[:] = saved_argv[2] |
| |
| def get_cwd(self): |
| return os.getcwd() |
| def restore_cwd(self, saved_cwd): |
| os.chdir(saved_cwd) |
| |
| def get_sys_stdout(self): |
| return sys.stdout |
| def restore_sys_stdout(self, saved_stdout): |
| sys.stdout = saved_stdout |
| |
| def get_sys_stderr(self): |
| return sys.stderr |
| def restore_sys_stderr(self, saved_stderr): |
| sys.stderr = saved_stderr |
| |
| def get_sys_stdin(self): |
| return sys.stdin |
| def restore_sys_stdin(self, saved_stdin): |
| sys.stdin = saved_stdin |
| |
| def get_os_environ(self): |
| return id(os.environ), os.environ, dict(os.environ) |
| def restore_os_environ(self, saved_environ): |
| os.environ = saved_environ[1] |
| os.environ.clear() |
| os.environ.update(saved_environ[2]) |
| |
| def get_sys_path(self): |
| return id(sys.path), sys.path, sys.path[:] |
| def restore_sys_path(self, saved_path): |
| sys.path = saved_path[1] |
| sys.path[:] = saved_path[2] |
| |
| def get_sys_path_hooks(self): |
| return id(sys.path_hooks), sys.path_hooks, sys.path_hooks[:] |
| def restore_sys_path_hooks(self, saved_hooks): |
| sys.path_hooks = saved_hooks[1] |
| sys.path_hooks[:] = saved_hooks[2] |
| |
| def get_sys_gettrace(self): |
| return sys.gettrace() |
| def restore_sys_gettrace(self, trace_fxn): |
| sys.settrace(trace_fxn) |
| |
| def get___import__(self): |
| return builtins.__import__ |
| def restore___import__(self, import_): |
| builtins.__import__ = import_ |
| |
| def get_warnings_filters(self): |
| return id(warnings.filters), warnings.filters, warnings.filters[:] |
| def restore_warnings_filters(self, saved_filters): |
| warnings.filters = saved_filters[1] |
| warnings.filters[:] = saved_filters[2] |
| |
| def get_asyncore_socket_map(self): |
| asyncore = sys.modules.get('asyncore') |
| # XXX Making a copy keeps objects alive until __exit__ gets called. |
| return asyncore and asyncore.socket_map.copy() or {} |
| def restore_asyncore_socket_map(self, saved_map): |
| asyncore = sys.modules.get('asyncore') |
| if asyncore is not None: |
| asyncore.close_all(ignore_all=True) |
| asyncore.socket_map.update(saved_map) |
| |
| def get_shutil_archive_formats(self): |
| # we could call get_archives_formats() but that only returns the |
| # registry keys; we want to check the values too (the functions that |
| # are registered) |
| return shutil._ARCHIVE_FORMATS, shutil._ARCHIVE_FORMATS.copy() |
| def restore_shutil_archive_formats(self, saved): |
| shutil._ARCHIVE_FORMATS = saved[0] |
| shutil._ARCHIVE_FORMATS.clear() |
| shutil._ARCHIVE_FORMATS.update(saved[1]) |
| |
| def get_shutil_unpack_formats(self): |
| return shutil._UNPACK_FORMATS, shutil._UNPACK_FORMATS.copy() |
| def restore_shutil_unpack_formats(self, saved): |
| shutil._UNPACK_FORMATS = saved[0] |
| shutil._UNPACK_FORMATS.clear() |
| shutil._UNPACK_FORMATS.update(saved[1]) |
| |
| def get_logging__handlers(self): |
| # _handlers is a WeakValueDictionary |
| return id(logging._handlers), logging._handlers, logging._handlers.copy() |
| def restore_logging__handlers(self, saved_handlers): |
| # Can't easily revert the logging state |
| pass |
| |
| def get_logging__handlerList(self): |
| # _handlerList is a list of weakrefs to handlers |
| return id(logging._handlerList), logging._handlerList, logging._handlerList[:] |
| def restore_logging__handlerList(self, saved_handlerList): |
| # Can't easily revert the logging state |
| pass |
| |
| def get_sys_warnoptions(self): |
| return id(sys.warnoptions), sys.warnoptions, sys.warnoptions[:] |
| def restore_sys_warnoptions(self, saved_options): |
| sys.warnoptions = saved_options[1] |
| sys.warnoptions[:] = saved_options[2] |
| |
| # Controlling dangling references to Thread objects can make it easier |
| # to track reference leaks. |
| def get_threading__dangling(self): |
| if not threading: |
| return None |
| # This copies the weakrefs without making any strong reference |
| return threading._dangling.copy() |
| def restore_threading__dangling(self, saved): |
| if not threading: |
| return |
| threading._dangling.clear() |
| threading._dangling.update(saved) |
| |
| # Same for Process objects |
| def get_multiprocessing_process__dangling(self): |
| if not multiprocessing: |
| return None |
| # Unjoined process objects can survive after process exits |
| multiprocessing.process._cleanup() |
| # This copies the weakrefs without making any strong reference |
| return multiprocessing.process._dangling.copy() |
| def restore_multiprocessing_process__dangling(self, saved): |
| if not multiprocessing: |
| return |
| multiprocessing.process._dangling.clear() |
| multiprocessing.process._dangling.update(saved) |
| |
| def get_sysconfig__CONFIG_VARS(self): |
| # make sure the dict is initialized |
| sysconfig.get_config_var('prefix') |
| return (id(sysconfig._CONFIG_VARS), sysconfig._CONFIG_VARS, |
| dict(sysconfig._CONFIG_VARS)) |
| def restore_sysconfig__CONFIG_VARS(self, saved): |
| sysconfig._CONFIG_VARS = saved[1] |
| sysconfig._CONFIG_VARS.clear() |
| sysconfig._CONFIG_VARS.update(saved[2]) |
| |
| def get_sysconfig__INSTALL_SCHEMES(self): |
| return (id(sysconfig._INSTALL_SCHEMES), sysconfig._INSTALL_SCHEMES, |
| sysconfig._INSTALL_SCHEMES.copy()) |
| def restore_sysconfig__INSTALL_SCHEMES(self, saved): |
| sysconfig._INSTALL_SCHEMES = saved[1] |
| sysconfig._INSTALL_SCHEMES.clear() |
| sysconfig._INSTALL_SCHEMES.update(saved[2]) |
| |
| def get_files(self): |
| return sorted(fn + ('/' if os.path.isdir(fn) else '') |
| for fn in os.listdir()) |
| def restore_files(self, saved_value): |
| fn = support.TESTFN |
| if fn not in saved_value and (fn + '/') not in saved_value: |
| if os.path.isfile(fn): |
| support.unlink(fn) |
| elif os.path.isdir(fn): |
| support.rmtree(fn) |
| |
| _lc = [getattr(locale, lc) for lc in dir(locale) |
| if lc.startswith('LC_')] |
| def get_locale(self): |
| pairings = [] |
| for lc in self._lc: |
| try: |
| pairings.append((lc, locale.setlocale(lc, None))) |
| except (TypeError, ValueError): |
| continue |
| return pairings |
| def restore_locale(self, saved): |
| for lc, setting in saved: |
| locale.setlocale(lc, setting) |
| |
| def get_warnings_showwarning(self): |
| return warnings.showwarning |
| def restore_warnings_showwarning(self, fxn): |
| warnings.showwarning = fxn |
| |
| def resource_info(self): |
| for name in self.resources: |
| method_suffix = name.replace('.', '_') |
| get_name = 'get_' + method_suffix |
| restore_name = 'restore_' + method_suffix |
| yield name, getattr(self, get_name), getattr(self, restore_name) |
| |
| def __enter__(self): |
| self.saved_values = dict((name, get()) for name, get, restore |
| in self.resource_info()) |
| return self |
| |
| def __exit__(self, exc_type, exc_val, exc_tb): |
| saved_values = self.saved_values |
| del self.saved_values |
| for name, get, restore in self.resource_info(): |
| current = get() |
| original = saved_values.pop(name) |
| # Check for changes to the resource's value |
| if current != original: |
| self.changed = True |
| restore(original) |
| if not self.quiet: |
| print("Warning -- {} was modified by {}".format( |
| name, self.testname), |
| file=sys.stderr) |
| if self.verbose > 1: |
| print(" Before: {}\n After: {} ".format( |
| original, current), |
| file=sys.stderr) |
| return False |
| |
| |
| def runtest_inner(test, verbose, quiet, |
| huntrleaks=False, display_failure=True): |
| support.unload(test) |
| |
| test_time = 0.0 |
| refleak = False # True if the test leaked references. |
| try: |
| if test.startswith('test.'): |
| abstest = test |
| else: |
| # Always import it from the test package |
| abstest = 'test.' + test |
| with saved_test_environment(test, verbose, quiet) as environment: |
| start_time = time.time() |
| the_module = importlib.import_module(abstest) |
| # If the test has a test_main, that will run the appropriate |
| # tests. If not, use normal unittest test loading. |
| test_runner = getattr(the_module, "test_main", None) |
| if test_runner is None: |
| def test_runner(): |
| loader = unittest.TestLoader() |
| tests = loader.loadTestsFromModule(the_module) |
| support.run_unittest(tests) |
| test_runner() |
| if huntrleaks: |
| refleak = dash_R(the_module, test, test_runner, huntrleaks) |
| test_time = time.time() - start_time |
| except support.ResourceDenied as msg: |
| if not quiet: |
| print(test, "skipped --", msg) |
| sys.stdout.flush() |
| return RESOURCE_DENIED, test_time |
| except unittest.SkipTest as msg: |
| if not quiet: |
| print(test, "skipped --", msg) |
| sys.stdout.flush() |
| return SKIPPED, test_time |
| except KeyboardInterrupt: |
| raise |
| except support.TestFailed as msg: |
| if display_failure: |
| print("test", test, "failed --", msg, file=sys.stderr) |
| else: |
| print("test", test, "failed", file=sys.stderr) |
| sys.stderr.flush() |
| return FAILED, test_time |
| except: |
| msg = traceback.format_exc() |
| print("test", test, "crashed --", msg, file=sys.stderr) |
| sys.stderr.flush() |
| return FAILED, test_time |
| else: |
| if refleak: |
| return FAILED, test_time |
| if environment.changed: |
| return ENV_CHANGED, test_time |
| return PASSED, test_time |
| |
| def cleanup_test_droppings(testname, verbose): |
| import shutil |
| import stat |
| import gc |
| |
| # First kill any dangling references to open files etc. |
| # This can also issue some ResourceWarnings which would otherwise get |
| # triggered during the following test run, and possibly produce failures. |
| gc.collect() |
| |
| # Try to clean up junk commonly left behind. While tests shouldn't leave |
| # any files or directories behind, when a test fails that can be tedious |
| # for it to arrange. The consequences can be especially nasty on Windows, |
| # since if a test leaves a file open, it cannot be deleted by name (while |
| # there's nothing we can do about that here either, we can display the |
| # name of the offending test, which is a real help). |
| for name in (support.TESTFN, |
| "db_home", |
| ): |
| if not os.path.exists(name): |
| continue |
| |
| if os.path.isdir(name): |
| kind, nuker = "directory", shutil.rmtree |
| elif os.path.isfile(name): |
| kind, nuker = "file", os.unlink |
| else: |
| raise SystemError("os.path says %r exists but is neither " |
| "directory nor file" % name) |
| |
| if verbose: |
| print("%r left behind %s %r" % (testname, kind, name)) |
| try: |
| # if we have chmod, fix possible permissions problems |
| # that might prevent cleanup |
| if (hasattr(os, 'chmod')): |
| os.chmod(name, stat.S_IRWXU | stat.S_IRWXG | stat.S_IRWXO) |
| nuker(name) |
| except Exception as msg: |
| print(("%r left behind %s %r and it couldn't be " |
| "removed: %s" % (testname, kind, name, msg)), file=sys.stderr) |
| |
| def dash_R(the_module, test, indirect_test, huntrleaks): |
| """Run a test multiple times, looking for reference leaks. |
| |
| Returns: |
| False if the test didn't leak references; True if we detected refleaks. |
| """ |
| # This code is hackish and inelegant, but it seems to do the job. |
| import copyreg |
| import collections.abc |
| |
| if not hasattr(sys, 'gettotalrefcount'): |
| raise Exception("Tracking reference leaks requires a debug build " |
| "of Python") |
| |
| # Save current values for dash_R_cleanup() to restore. |
| fs = warnings.filters[:] |
| ps = copyreg.dispatch_table.copy() |
| pic = sys.path_importer_cache.copy() |
| try: |
| import zipimport |
| except ImportError: |
| zdc = None # Run unmodified on platforms without zipimport support |
| else: |
| zdc = zipimport._zip_directory_cache.copy() |
| abcs = {} |
| for abc in [getattr(collections.abc, a) for a in collections.abc.__all__]: |
| if not isabstract(abc): |
| continue |
| for obj in abc.__subclasses__() + [abc]: |
| abcs[obj] = obj._abc_registry.copy() |
| |
| nwarmup, ntracked, fname = huntrleaks |
| fname = os.path.join(support.SAVEDCWD, fname) |
| repcount = nwarmup + ntracked |
| rc_deltas = [0] * repcount |
| alloc_deltas = [0] * repcount |
| |
| print("beginning", repcount, "repetitions", file=sys.stderr) |
| print(("1234567890"*(repcount//10 + 1))[:repcount], file=sys.stderr) |
| sys.stderr.flush() |
| for i in range(repcount): |
| indirect_test() |
| alloc_after, rc_after = dash_R_cleanup(fs, ps, pic, zdc, abcs) |
| sys.stderr.write('.') |
| sys.stderr.flush() |
| if i >= nwarmup: |
| rc_deltas[i] = rc_after - rc_before |
| alloc_deltas[i] = alloc_after - alloc_before |
| alloc_before, rc_before = alloc_after, rc_after |
| print(file=sys.stderr) |
| # These checkers return False on success, True on failure |
| def check_rc_deltas(deltas): |
| return any(deltas) |
| def check_alloc_deltas(deltas): |
| # At least 1/3rd of 0s |
| if 3 * deltas.count(0) < len(deltas): |
| return True |
| # Nothing else than 1s, 0s and -1s |
| if not set(deltas) <= {1,0,-1}: |
| return True |
| return False |
| failed = False |
| for deltas, item_name, checker in [ |
| (rc_deltas, 'references', check_rc_deltas), |
| (alloc_deltas, 'memory blocks', check_alloc_deltas)]: |
| if checker(deltas): |
| msg = '%s leaked %s %s, sum=%s' % ( |
| test, deltas[nwarmup:], item_name, sum(deltas)) |
| print(msg, file=sys.stderr) |
| sys.stderr.flush() |
| with open(fname, "a") as refrep: |
| print(msg, file=refrep) |
| refrep.flush() |
| failed = True |
| return failed |
| |
| def dash_R_cleanup(fs, ps, pic, zdc, abcs): |
| import gc, copyreg |
| import _strptime, linecache |
| import urllib.parse, urllib.request, mimetypes, doctest |
| import struct, filecmp, collections.abc |
| from distutils.dir_util import _path_created |
| from weakref import WeakSet |
| |
| # Clear the warnings registry, so they can be displayed again |
| for mod in sys.modules.values(): |
| if hasattr(mod, '__warningregistry__'): |
| del mod.__warningregistry__ |
| |
| # Restore some original values. |
| warnings.filters[:] = fs |
| copyreg.dispatch_table.clear() |
| copyreg.dispatch_table.update(ps) |
| sys.path_importer_cache.clear() |
| sys.path_importer_cache.update(pic) |
| try: |
| import zipimport |
| except ImportError: |
| pass # Run unmodified on platforms without zipimport support |
| else: |
| zipimport._zip_directory_cache.clear() |
| zipimport._zip_directory_cache.update(zdc) |
| |
| # clear type cache |
| sys._clear_type_cache() |
| |
| # Clear ABC registries, restoring previously saved ABC registries. |
| for abc in [getattr(collections.abc, a) for a in collections.abc.__all__]: |
| if not isabstract(abc): |
| continue |
| for obj in abc.__subclasses__() + [abc]: |
| obj._abc_registry = abcs.get(obj, WeakSet()).copy() |
| obj._abc_cache.clear() |
| obj._abc_negative_cache.clear() |
| |
| # Flush standard output, so that buffered data is sent to the OS and |
| # associated Python objects are reclaimed. |
| for stream in (sys.stdout, sys.stderr, sys.__stdout__, sys.__stderr__): |
| if stream is not None: |
| stream.flush() |
| |
| # Clear assorted module caches. |
| _path_created.clear() |
| re.purge() |
| _strptime._regex_cache.clear() |
| urllib.parse.clear_cache() |
| urllib.request.urlcleanup() |
| linecache.clearcache() |
| mimetypes._default_mime_types() |
| filecmp._cache.clear() |
| struct._clearcache() |
| doctest.master = None |
| try: |
| import ctypes |
| except ImportError: |
| # Don't worry about resetting the cache if ctypes is not supported |
| pass |
| else: |
| ctypes._reset_cache() |
| |
| # Collect cyclic trash and read memory statistics immediately after. |
| func1 = sys.getallocatedblocks |
| func2 = sys.gettotalrefcount |
| gc.collect() |
| return func1(), func2() |
| |
| def warm_caches(): |
| # char cache |
| s = bytes(range(256)) |
| for i in range(256): |
| s[i:i+1] |
| # unicode cache |
| x = [chr(i) for i in range(256)] |
| # int cache |
| x = list(range(-5, 257)) |
| |
| def findtestdir(path=None): |
| return path or os.path.dirname(__file__) or os.curdir |
| |
| def removepy(names): |
| if not names: |
| return |
| for idx, name in enumerate(names): |
| basename, ext = os.path.splitext(name) |
| if ext == '.py': |
| names[idx] = basename |
| |
| def count(n, word): |
| if n == 1: |
| return "%d %s" % (n, word) |
| else: |
| return "%d %ss" % (n, word) |
| |
| def printlist(x, width=70, indent=4): |
| """Print the elements of iterable x to stdout. |
| |
| Optional arg width (default 70) is the maximum line length. |
| Optional arg indent (default 4) is the number of blanks with which to |
| begin each line. |
| """ |
| |
| from textwrap import fill |
| blanks = ' ' * indent |
| # Print the sorted list: 'x' may be a '--random' list or a set() |
| print(fill(' '.join(str(elt) for elt in sorted(x)), width, |
| initial_indent=blanks, subsequent_indent=blanks)) |
| |
| |
| def main_in_temp_cwd(): |
| """Run main() in a temporary working directory.""" |
| if sysconfig.is_python_build(): |
| try: |
| os.mkdir(TEMPDIR) |
| except FileExistsError: |
| pass |
| |
| # Define a writable temp dir that will be used as cwd while running |
| # the tests. The name of the dir includes the pid to allow parallel |
| # testing (see the -j option). |
| test_cwd = 'test_python_{}'.format(os.getpid()) |
| test_cwd = os.path.join(TEMPDIR, test_cwd) |
| |
| # Run the tests in a context manager that temporarily changes the CWD to a |
| # temporary and writable directory. If it's not possible to create or |
| # change the CWD, the original CWD will be used. The original CWD is |
| # available from support.SAVEDCWD. |
| with support.temp_cwd(test_cwd, quiet=True): |
| main() |
| |
| |
| if __name__ == '__main__': |
| # Remove regrtest.py's own directory from the module search path. Despite |
| # the elimination of implicit relative imports, this is still needed to |
| # ensure that submodules of the test package do not inappropriately appear |
| # as top-level modules even when people (or buildbots!) invoke regrtest.py |
| # directly instead of using the -m switch |
| mydir = os.path.abspath(os.path.normpath(os.path.dirname(sys.argv[0]))) |
| i = len(sys.path) |
| while i >= 0: |
| i -= 1 |
| if os.path.abspath(os.path.normpath(sys.path[i])) == mydir: |
| del sys.path[i] |
| |
| # findtestdir() gets the dirname out of __file__, so we have to make it |
| # absolute before changing the working directory. |
| # For example __file__ may be relative when running trace or profile. |
| # See issue #9323. |
| __file__ = os.path.abspath(__file__) |
| |
| # sanity check |
| assert __file__ == os.path.abspath(sys.argv[0]) |
| |
| main_in_temp_cwd() |