diff --git a/Lib/test/test_file.py b/Lib/test/test_file.py
index 4b0c759..1974f56 100644
--- a/Lib/test/test_file.py
+++ b/Lib/test/test_file.py
@@ -1,3 +1,6 @@
+# NOTE: this file tests the new `io` library backported from Python 3.x.
+# Similar tests for the builtin file object can be found in test_file2k.py.
+
 from __future__ import print_function
 
 import sys
diff --git a/Lib/test/test_file2k.py b/Lib/test/test_file2k.py
index 4b0c759..a134a89 100644
--- a/Lib/test/test_file2k.py
+++ b/Lib/test/test_file2k.py
@@ -1,14 +1,13 @@
-from __future__ import print_function
-
 import sys
 import os
 import unittest
+import itertools
+import time
+import threading
 from array import array
 from weakref import proxy
 
-import io
-import _pyio as pyio
-
+from test import test_support
 from test.test_support import TESTFN, findfile, run_unittest
 from UserList import UserList
 
@@ -16,7 +15,7 @@
     # file tests for which a test file is automatically set up
 
     def setUp(self):
-        self.f = self.open(TESTFN, 'wb')
+        self.f = open(TESTFN, 'wb')
 
     def tearDown(self):
         if self.f:
@@ -26,7 +25,7 @@
     def testWeakRefs(self):
         # verify weak references
         p = proxy(self.f)
-        p.write(b'teststring')
+        p.write('teststring')
         self.assertEquals(self.f.tell(), p.tell())
         self.f.close()
         self.f = None
@@ -35,35 +34,35 @@
     def testAttributes(self):
         # verify expected attributes exist
         f = self.f
+        softspace = f.softspace
         f.name     # merely shouldn't blow up
         f.mode     # ditto
         f.closed   # ditto
 
+        # verify softspace is writable
+        f.softspace = softspace    # merely shouldn't blow up
+
+        # verify the others aren't
+        for attr in 'name', 'mode', 'closed':
+            self.assertRaises((AttributeError, TypeError), setattr, f, attr, 'oops')
+
     def testReadinto(self):
         # verify readinto
-        self.f.write(b'12')
+        self.f.write('12')
         self.f.close()
-        a = array('b', b'x'*10)
-        self.f = self.open(TESTFN, 'rb')
+        a = array('c', 'x'*10)
+        self.f = open(TESTFN, 'rb')
         n = self.f.readinto(a)
-        self.assertEquals(b'12', a.tostring()[:n])
-
-    def testReadinto_text(self):
-        # verify readinto refuses text files
-        a = array('b', b'x'*10)
-        self.f.close()
-        self.f = self.open(TESTFN, 'r')
-        if hasattr(self.f, "readinto"):
-            self.assertRaises(TypeError, self.f.readinto, a)
+        self.assertEquals('12', a.tostring()[:n])
 
     def testWritelinesUserList(self):
         # verify writelines with instance sequence
-        l = UserList([b'1', b'2'])
+        l = UserList(['1', '2'])
         self.f.writelines(l)
         self.f.close()
-        self.f = self.open(TESTFN, 'rb')
+        self.f = open(TESTFN, 'rb')
         buf = self.f.read()
-        self.assertEquals(buf, b'12')
+        self.assertEquals(buf, '12')
 
     def testWritelinesIntegers(self):
         # verify writelines with integers
@@ -82,43 +81,36 @@
         self.assertRaises(TypeError, self.f.writelines,
                           [NonString(), NonString()])
 
+    def testRepr(self):
+        # verify repr works
+        self.assert_(repr(self.f).startswith("<open file '" + TESTFN))
+
     def testErrors(self):
         f = self.f
         self.assertEquals(f.name, TESTFN)
         self.assert_(not f.isatty())
         self.assert_(not f.closed)
 
-        if hasattr(f, "readinto"):
-            self.assertRaises((IOError, TypeError), f.readinto, "")
+        self.assertRaises(TypeError, f.readinto, "")
         f.close()
         self.assert_(f.closed)
 
     def testMethods(self):
-        methods = [('fileno', ()),
-                   ('flush', ()),
-                   ('isatty', ()),
-                   ('next', ()),
-                   ('read', ()),
-                   ('write', (b"",)),
-                   ('readline', ()),
-                   ('readlines', ()),
-                   ('seek', (0,)),
-                   ('tell', ()),
-                   ('write', (b"",)),
-                   ('writelines', ([],)),
-                   ('__iter__', ()),
-                   ]
-        if not sys.platform.startswith('atheos'):
-            methods.append(('truncate', ()))
+        methods = ['fileno', 'flush', 'isatty', 'next', 'read', 'readinto',
+                   'readline', 'readlines', 'seek', 'tell', 'truncate',
+                   'write', 'xreadlines', '__iter__']
+        if sys.platform.startswith('atheos'):
+            methods.remove('truncate')
 
         # __exit__ should close the file
         self.f.__exit__(None, None, None)
         self.assert_(self.f.closed)
 
-        for methodname, args in methods:
+        for methodname in methods:
             method = getattr(self.f, methodname)
             # should raise on closed file
-            self.assertRaises(ValueError, method, *args)
+            self.assertRaises(ValueError, method)
+        self.assertRaises(ValueError, self.f.writelines, [])
 
         # file is closed, __exit__ shouldn't do anything
         self.assertEquals(self.f.__exit__(None, None, None), None)
@@ -131,47 +123,70 @@
     def testReadWhenWriting(self):
         self.assertRaises(IOError, self.f.read)
 
-class CAutoFileTests(AutoFileTests):
-    open = io.open
-
-class PyAutoFileTests(AutoFileTests):
-    open = staticmethod(pyio.open)
-
-
 class OtherFileTests(unittest.TestCase):
 
+    def testOpenDir(self):
+        this_dir = os.path.dirname(__file__)
+        for mode in (None, "w"):
+            try:
+                if mode:
+                    f = open(this_dir, mode)
+                else:
+                    f = open(this_dir)
+            except IOError as e:
+                self.assertEqual(e.filename, this_dir)
+            else:
+                self.fail("opening a directory didn't raise an IOError")
+
     def testModeStrings(self):
         # check invalid mode strings
         for mode in ("", "aU", "wU+"):
             try:
-                f = self.open(TESTFN, mode)
+                f = open(TESTFN, mode)
             except ValueError:
                 pass
             else:
                 f.close()
                 self.fail('%r is an invalid file mode' % mode)
 
+        # Some invalid modes fail on Windows, but pass on Unix
+        # Issue3965: avoid a crash on Windows when filename is unicode
+        for name in (TESTFN, unicode(TESTFN), unicode(TESTFN + '\t')):
+            try:
+                f = open(name, "rr")
+            except (IOError, ValueError):
+                pass
+            else:
+                f.close()
+
     def testStdin(self):
         # This causes the interpreter to exit on OSF1 v5.1.
         if sys.platform != 'osf1V5':
-            self.assertRaises((IOError, ValueError), sys.stdin.seek, -1)
+            self.assertRaises(IOError, sys.stdin.seek, -1)
         else:
-            print((
+            print >>sys.__stdout__, (
                 '  Skipping sys.stdin.seek(-1), it may crash the interpreter.'
-                ' Test manually.'), file=sys.__stdout__)
-        self.assertRaises((IOError, ValueError), sys.stdin.truncate)
+                ' Test manually.')
+        self.assertRaises(IOError, sys.stdin.truncate)
+
+    def testUnicodeOpen(self):
+        # verify repr works for unicode too
+        f = open(unicode(TESTFN), "w")
+        self.assert_(repr(f).startswith("<open file u'" + TESTFN))
+        f.close()
+        os.unlink(TESTFN)
 
     def testBadModeArgument(self):
         # verify that we get a sensible error message for bad mode argument
         bad_mode = "qwerty"
         try:
-            f = self.open(TESTFN, bad_mode)
-        except ValueError as msg:
-            if msg.args[0] != 0:
+            f = open(TESTFN, bad_mode)
+        except ValueError, msg:
+            if msg[0] != 0:
                 s = str(msg)
                 if s.find(TESTFN) != -1 or s.find(bad_mode) == -1:
                     self.fail("bad error message for invalid mode: %s" % s)
-            # if msg.args[0] == 0, we're probably on Windows where there may be
+            # if msg[0] == 0, we're probably on Windows where there may be
             # no obvious way to discover why open() failed.
         else:
             f.close()
@@ -182,32 +197,31 @@
         # misbehaviour especially with repeated close() calls
         for s in (-1, 0, 1, 512):
             try:
-                f = self.open(TESTFN, 'wb', s)
-                f.write(str(s).encode("ascii"))
+                f = open(TESTFN, 'w', s)
+                f.write(str(s))
                 f.close()
                 f.close()
-                f = self.open(TESTFN, 'rb', s)
-                d = int(f.read().decode("ascii"))
+                f = open(TESTFN, 'r', s)
+                d = int(f.read())
                 f.close()
                 f.close()
-            except IOError as msg:
+            except IOError, msg:
                 self.fail('error setting buffer size %d: %s' % (s, str(msg)))
             self.assertEquals(d, s)
 
     def testTruncateOnWindows(self):
-        # SF bug <http://www.python.org/sf/801631>
-        # "file.truncate fault on windows"
-
         os.unlink(TESTFN)
-        f = self.open(TESTFN, 'wb')
 
-        try:
-            f.write(b'12345678901')   # 11 bytes
+        def bug801631():
+            # SF bug <http://www.python.org/sf/801631>
+            # "file.truncate fault on windows"
+            f = open(TESTFN, 'wb')
+            f.write('12345678901')   # 11 bytes
             f.close()
 
-            f = self.open(TESTFN,'rb+')
+            f = open(TESTFN,'rb+')
             data = f.read(5)
-            if data != b'12345':
+            if data != '12345':
                 self.fail("Read on file opened for update failed %r" % data)
             if f.tell() != 5:
                 self.fail("File pos after read wrong %d" % f.tell())
@@ -220,42 +234,56 @@
             size = os.path.getsize(TESTFN)
             if size != 5:
                 self.fail("File size after ftruncate wrong %d" % size)
+
+        try:
+            bug801631()
         finally:
-            f.close()
             os.unlink(TESTFN)
 
     def testIteration(self):
         # Test the complex interaction when mixing file-iteration and the
-        # various read* methods.
+        # various read* methods. Ostensibly, the mixture could just be tested
+        # to work when it should work according to the Python language,
+        # instead of fail when it should fail according to the current CPython
+        # implementation.  People don't always program Python the way they
+        # should, though, and the implemenation might change in subtle ways,
+        # so we explicitly test for errors, too; the test will just have to
+        # be updated when the implementation changes.
         dataoffset = 16384
-        filler = b"ham\n"
+        filler = "ham\n"
         assert not dataoffset % len(filler), \
             "dataoffset must be multiple of len(filler)"
         nchunks = dataoffset // len(filler)
         testlines = [
-            b"spam, spam and eggs\n",
-            b"eggs, spam, ham and spam\n",
-            b"saussages, spam, spam and eggs\n",
-            b"spam, ham, spam and eggs\n",
-            b"spam, spam, spam, spam, spam, ham, spam\n",
-            b"wonderful spaaaaaam.\n"
+            "spam, spam and eggs\n",
+            "eggs, spam, ham and spam\n",
+            "saussages, spam, spam and eggs\n",
+            "spam, ham, spam and eggs\n",
+            "spam, spam, spam, spam, spam, ham, spam\n",
+            "wonderful spaaaaaam.\n"
         ]
         methods = [("readline", ()), ("read", ()), ("readlines", ()),
-                   ("readinto", (array("b", b" "*100),))]
+                   ("readinto", (array("c", " "*100),))]
 
         try:
             # Prepare the testfile
-            bag = self.open(TESTFN, "wb")
+            bag = open(TESTFN, "w")
             bag.write(filler * nchunks)
             bag.writelines(testlines)
             bag.close()
             # Test for appropriate errors mixing read* and iteration
             for methodname, args in methods:
-                f = self.open(TESTFN, 'rb')
-                if next(f) != filler:
+                f = open(TESTFN)
+                if f.next() != filler:
                     self.fail, "Broken testfile"
                 meth = getattr(f, methodname)
-                meth(*args)  # This simply shouldn't fail
+                try:
+                    meth(*args)
+                except ValueError:
+                    pass
+                else:
+                    self.fail("%s%r after next() didn't raise ValueError" %
+                                     (methodname, args))
                 f.close()
 
             # Test to see if harmless (by accident) mixing of read* and
@@ -265,9 +293,9 @@
             # ("h", "a", "m", "\n"), so 4096 lines of that should get us
             # exactly on the buffer boundary for any power-of-2 buffersize
             # between 4 and 16384 (inclusive).
-            f = self.open(TESTFN, 'rb')
+            f = open(TESTFN)
             for i in range(nchunks):
-                next(f)
+                f.next()
             testline = testlines.pop(0)
             try:
                 line = f.readline()
@@ -278,7 +306,7 @@
                 self.fail("readline() after next() with empty buffer "
                           "failed. Got %r, expected %r" % (line, testline))
             testline = testlines.pop(0)
-            buf = array("b", b"\x00" * len(testline))
+            buf = array("c", "\x00" * len(testline))
             try:
                 f.readinto(buf)
             except ValueError:
@@ -307,7 +335,7 @@
                 self.fail("readlines() after next() with empty buffer "
                           "failed. Got %r, expected %r" % (line, testline))
             # Reading after iteration hit EOF shouldn't hurt either
-            f = self.open(TESTFN, 'rb')
+            f = open(TESTFN)
             try:
                 for line in f:
                     pass
@@ -323,19 +351,222 @@
         finally:
             os.unlink(TESTFN)
 
-class COtherFileTests(OtherFileTests):
-    open = io.open
+class FileSubclassTests(unittest.TestCase):
 
-class PyOtherFileTests(OtherFileTests):
-    open = staticmethod(pyio.open)
+    def testExit(self):
+        # test that exiting with context calls subclass' close
+        class C(file):
+            def __init__(self, *args):
+                self.subclass_closed = False
+                file.__init__(self, *args)
+            def close(self):
+                self.subclass_closed = True
+                file.close(self)
+
+        with C(TESTFN, 'w') as f:
+            pass
+        self.failUnless(f.subclass_closed)
+
+
+class FileThreadingTests(unittest.TestCase):
+    # These tests check the ability to call various methods of file objects
+    # (including close()) concurrently without crashing the Python interpreter.
+    # See #815646, #595601
+
+    def setUp(self):
+        self.f = None
+        self.filename = TESTFN
+        with open(self.filename, "w") as f:
+            f.write("\n".join("0123456789"))
+        self._count_lock = threading.Lock()
+        self.close_count = 0
+        self.close_success_count = 0
+
+    def tearDown(self):
+        if self.f:
+            try:
+                self.f.close()
+            except (EnvironmentError, ValueError):
+                pass
+        try:
+            os.remove(self.filename)
+        except EnvironmentError:
+            pass
+
+    def _create_file(self):
+        self.f = open(self.filename, "w+")
+
+    def _close_file(self):
+        with self._count_lock:
+            self.close_count += 1
+        self.f.close()
+        with self._count_lock:
+            self.close_success_count += 1
+
+    def _close_and_reopen_file(self):
+        self._close_file()
+        # if close raises an exception thats fine, self.f remains valid so
+        # we don't need to reopen.
+        self._create_file()
+
+    def _run_workers(self, func, nb_workers, duration=0.2):
+        with self._count_lock:
+            self.close_count = 0
+            self.close_success_count = 0
+        self.do_continue = True
+        threads = []
+        try:
+            for i in range(nb_workers):
+                t = threading.Thread(target=func)
+                t.start()
+                threads.append(t)
+            for _ in xrange(100):
+                time.sleep(duration/100)
+                with self._count_lock:
+                    if self.close_count-self.close_success_count > nb_workers+1:
+                        if test_support.verbose:
+                            print 'Q',
+                        break
+            time.sleep(duration)
+        finally:
+            self.do_continue = False
+            for t in threads:
+                t.join()
+
+    def _test_close_open_io(self, io_func, nb_workers=5):
+        def worker():
+            self._create_file()
+            funcs = itertools.cycle((
+                lambda: io_func(),
+                lambda: self._close_and_reopen_file(),
+            ))
+            for f in funcs:
+                if not self.do_continue:
+                    break
+                try:
+                    f()
+                except (IOError, ValueError):
+                    pass
+        self._run_workers(worker, nb_workers)
+        if test_support.verbose:
+            # Useful verbose statistics when tuning this test to take
+            # less time to run but still ensuring that its still useful.
+            #
+            # the percent of close calls that raised an error
+            percent = 100. - 100.*self.close_success_count/self.close_count
+            print self.close_count, ('%.4f ' % percent),
+
+    def test_close_open(self):
+        def io_func():
+            pass
+        self._test_close_open_io(io_func)
+
+    def test_close_open_flush(self):
+        def io_func():
+            self.f.flush()
+        self._test_close_open_io(io_func)
+
+    def test_close_open_iter(self):
+        def io_func():
+            list(iter(self.f))
+        self._test_close_open_io(io_func)
+
+    def test_close_open_isatty(self):
+        def io_func():
+            self.f.isatty()
+        self._test_close_open_io(io_func)
+
+    def test_close_open_print(self):
+        def io_func():
+            print >> self.f, ''
+        self._test_close_open_io(io_func)
+
+    def test_close_open_read(self):
+        def io_func():
+            self.f.read(0)
+        self._test_close_open_io(io_func)
+
+    def test_close_open_readinto(self):
+        def io_func():
+            a = array('c', 'xxxxx')
+            self.f.readinto(a)
+        self._test_close_open_io(io_func)
+
+    def test_close_open_readline(self):
+        def io_func():
+            self.f.readline()
+        self._test_close_open_io(io_func)
+
+    def test_close_open_readlines(self):
+        def io_func():
+            self.f.readlines()
+        self._test_close_open_io(io_func)
+
+    def test_close_open_seek(self):
+        def io_func():
+            self.f.seek(0, 0)
+        self._test_close_open_io(io_func)
+
+    def test_close_open_tell(self):
+        def io_func():
+            self.f.tell()
+        self._test_close_open_io(io_func)
+
+    def test_close_open_truncate(self):
+        def io_func():
+            self.f.truncate()
+        self._test_close_open_io(io_func)
+
+    def test_close_open_write(self):
+        def io_func():
+            self.f.write('')
+        self._test_close_open_io(io_func)
+
+    def test_close_open_writelines(self):
+        def io_func():
+            self.f.writelines('')
+        self._test_close_open_io(io_func)
+
+
+class StdoutTests(unittest.TestCase):
+
+    def test_move_stdout_on_write(self):
+        # Issue 3242: sys.stdout can be replaced (and freed) during a
+        # print statement; prevent a segfault in this case
+        save_stdout = sys.stdout
+
+        class File:
+            def write(self, data):
+                if '\n' in data:
+                    sys.stdout = save_stdout
+
+        try:
+            sys.stdout = File()
+            print "some text"
+        finally:
+            sys.stdout = save_stdout
+
+    def test_del_stdout_before_print(self):
+        # Issue 4597: 'print' with no argument wasn't reporting when
+        # sys.stdout was deleted.
+        save_stdout = sys.stdout
+        del sys.stdout
+        try:
+            print
+        except RuntimeError as e:
+            self.assertEquals(str(e), "lost sys.stdout")
+        else:
+            self.fail("Expected RuntimeError")
+        finally:
+            sys.stdout = save_stdout
 
 
 def test_main():
     # Historically, these tests have been sloppy about removing TESTFN.
     # So get rid of it no matter what.
     try:
-        run_unittest(CAutoFileTests, PyAutoFileTests,
-                     COtherFileTests, PyOtherFileTests)
+        run_unittest(AutoFileTests, OtherFileTests, FileSubclassTests,
+            FileThreadingTests, StdoutTests)
     finally:
         if os.path.exists(TESTFN):
             os.unlink(TESTFN)
diff --git a/Lib/test/test_univnewlines.py b/Lib/test/test_univnewlines.py
index 1f7352a..a0a9090 100644
--- a/Lib/test/test_univnewlines.py
+++ b/Lib/test/test_univnewlines.py
@@ -1,5 +1,8 @@
 # Tests universal newline support for both reading and parsing files.
 
+# NOTE: this file tests the new `io` library backported from Python 3.x.
+# Similar tests for the builtin file object can be found in test_univnewlines2k.py.
+
 from __future__ import print_function
 from __future__ import unicode_literals
 
diff --git a/Lib/test/test_univnewlines2k.py b/Lib/test/test_univnewlines2k.py
new file mode 100644
index 0000000..63c6fe8
--- /dev/null
+++ b/Lib/test/test_univnewlines2k.py
@@ -0,0 +1,129 @@
+# Tests universal newline support for both reading and parsing files.
+import unittest
+import os
+import sys
+from test import test_support
+
+if not hasattr(sys.stdin, 'newlines'):
+    raise unittest.SkipTest, \
+        "This Python does not have universal newline support"
+
+FATX = 'x' * (2**14)
+
+DATA_TEMPLATE = [
+    "line1=1",
+    "line2='this is a very long line designed to go past the magic " +
+        "hundred character limit that is inside fileobject.c and which " +
+        "is meant to speed up the common case, but we also want to test " +
+        "the uncommon case, naturally.'",
+    "def line3():pass",
+    "line4 = '%s'" % FATX,
+    ]
+
+DATA_LF = "\n".join(DATA_TEMPLATE) + "\n"
+DATA_CR = "\r".join(DATA_TEMPLATE) + "\r"
+DATA_CRLF = "\r\n".join(DATA_TEMPLATE) + "\r\n"
+
+# Note that DATA_MIXED also tests the ability to recognize a lone \r
+# before end-of-file.
+DATA_MIXED = "\n".join(DATA_TEMPLATE) + "\r"
+DATA_SPLIT = [x + "\n" for x in DATA_TEMPLATE]
+del x
+
+class TestGenericUnivNewlines(unittest.TestCase):
+    # use a class variable DATA to define the data to write to the file
+    # and a class variable NEWLINE to set the expected newlines value
+    READMODE = 'U'
+    WRITEMODE = 'wb'
+
+    def setUp(self):
+        with open(test_support.TESTFN, self.WRITEMODE) as fp:
+            fp.write(self.DATA)
+
+    def tearDown(self):
+        try:
+            os.unlink(test_support.TESTFN)
+        except:
+            pass
+
+    def test_read(self):
+        with open(test_support.TESTFN, self.READMODE) as fp:
+            data = fp.read()
+        self.assertEqual(data, DATA_LF)
+        self.assertEqual(repr(fp.newlines), repr(self.NEWLINE))
+
+    def test_readlines(self):
+        with open(test_support.TESTFN, self.READMODE) as fp:
+            data = fp.readlines()
+        self.assertEqual(data, DATA_SPLIT)
+        self.assertEqual(repr(fp.newlines), repr(self.NEWLINE))
+
+    def test_readline(self):
+        with open(test_support.TESTFN, self.READMODE) as fp:
+            data = []
+            d = fp.readline()
+            while d:
+                data.append(d)
+                d = fp.readline()
+        self.assertEqual(data, DATA_SPLIT)
+        self.assertEqual(repr(fp.newlines), repr(self.NEWLINE))
+
+    def test_seek(self):
+        with open(test_support.TESTFN, self.READMODE) as fp:
+            fp.readline()
+            pos = fp.tell()
+            data = fp.readlines()
+            self.assertEqual(data, DATA_SPLIT[1:])
+            fp.seek(pos)
+            data = fp.readlines()
+        self.assertEqual(data, DATA_SPLIT[1:])
+
+    def test_execfile(self):
+        namespace = {}
+        execfile(test_support.TESTFN, namespace)
+        func = namespace['line3']
+        self.assertEqual(func.func_code.co_firstlineno, 3)
+        self.assertEqual(namespace['line4'], FATX)
+
+
+class TestNativeNewlines(TestGenericUnivNewlines):
+    NEWLINE = None
+    DATA = DATA_LF
+    READMODE = 'r'
+    WRITEMODE = 'w'
+
+class TestCRNewlines(TestGenericUnivNewlines):
+    NEWLINE = '\r'
+    DATA = DATA_CR
+
+class TestLFNewlines(TestGenericUnivNewlines):
+    NEWLINE = '\n'
+    DATA = DATA_LF
+
+class TestCRLFNewlines(TestGenericUnivNewlines):
+    NEWLINE = '\r\n'
+    DATA = DATA_CRLF
+
+    def test_tell(self):
+        with open(test_support.TESTFN, self.READMODE) as fp:
+            self.assertEqual(repr(fp.newlines), repr(None))
+            data = fp.readline()
+            pos = fp.tell()
+        self.assertEqual(repr(fp.newlines), repr(self.NEWLINE))
+
+class TestMixedNewlines(TestGenericUnivNewlines):
+    NEWLINE = ('\r', '\n')
+    DATA = DATA_MIXED
+
+
+def test_main():
+    test_support.run_unittest(
+        TestNativeNewlines,
+        TestCRNewlines,
+        TestLFNewlines,
+        TestCRLFNewlines,
+        TestMixedNewlines
+     )
+
+if __name__ == '__main__':
+    test_main()