| """Utility functions for copying and archiving files and directory trees. |
| |
| XXX The functions here don't copy the resource fork or other metadata on Mac. |
| |
| """ |
| |
| import os |
| import sys |
| import stat |
| from os.path import abspath |
| import fnmatch |
| import collections |
| import errno |
| import tarfile |
| |
| try: |
| import bz2 |
| _BZ2_SUPPORTED = True |
| except ImportError: |
| _BZ2_SUPPORTED = False |
| |
| try: |
| from pwd import getpwnam |
| except ImportError: |
| getpwnam = None |
| |
| try: |
| from grp import getgrnam |
| except ImportError: |
| getgrnam = None |
| |
| __all__ = ["copyfileobj", "copyfile", "copymode", "copystat", "copy", "copy2", |
| "copytree", "move", "rmtree", "Error", "SpecialFileError", |
| "ExecError", "make_archive", "get_archive_formats", |
| "register_archive_format", "unregister_archive_format", |
| "get_unpack_formats", "register_unpack_format", |
| "unregister_unpack_format", "unpack_archive"] |
| |
| class Error(EnvironmentError): |
| pass |
| |
| class SpecialFileError(EnvironmentError): |
| """Raised when trying to do a kind of operation (e.g. copying) which is |
| not supported on a special file (e.g. a named pipe)""" |
| |
| class ExecError(EnvironmentError): |
| """Raised when a command could not be executed""" |
| |
| class ReadError(EnvironmentError): |
| """Raised when an archive cannot be read""" |
| |
| class RegistryError(Exception): |
| """Raised when a registery operation with the archiving |
| and unpacking registeries fails""" |
| |
| |
| try: |
| WindowsError |
| except NameError: |
| WindowsError = None |
| |
| def copyfileobj(fsrc, fdst, length=16*1024): |
| """copy data from file-like object fsrc to file-like object fdst""" |
| while 1: |
| buf = fsrc.read(length) |
| if not buf: |
| break |
| fdst.write(buf) |
| |
| def _samefile(src, dst): |
| # Macintosh, Unix. |
| if hasattr(os.path, 'samefile'): |
| try: |
| return os.path.samefile(src, dst) |
| except OSError: |
| return False |
| |
| # All other platforms: check for same pathname. |
| return (os.path.normcase(os.path.abspath(src)) == |
| os.path.normcase(os.path.abspath(dst))) |
| |
| def copyfile(src, dst): |
| """Copy data from src to dst""" |
| if _samefile(src, dst): |
| raise Error("`%s` and `%s` are the same file" % (src, dst)) |
| |
| for fn in [src, dst]: |
| try: |
| st = os.stat(fn) |
| except OSError: |
| # File most likely does not exist |
| pass |
| else: |
| # XXX What about other special files? (sockets, devices...) |
| if stat.S_ISFIFO(st.st_mode): |
| raise SpecialFileError("`%s` is a named pipe" % fn) |
| |
| with open(src, 'rb') as fsrc: |
| with open(dst, 'wb') as fdst: |
| copyfileobj(fsrc, fdst) |
| |
| def copymode(src, dst): |
| """Copy mode bits from src to dst""" |
| if hasattr(os, 'chmod'): |
| st = os.stat(src) |
| mode = stat.S_IMODE(st.st_mode) |
| os.chmod(dst, mode) |
| |
| def copystat(src, dst): |
| """Copy all stat info (mode bits, atime, mtime, flags) from src to dst""" |
| st = os.stat(src) |
| mode = stat.S_IMODE(st.st_mode) |
| if hasattr(os, 'utime'): |
| os.utime(dst, (st.st_atime, st.st_mtime)) |
| if hasattr(os, 'chmod'): |
| os.chmod(dst, mode) |
| if hasattr(os, 'chflags') and hasattr(st, 'st_flags'): |
| try: |
| os.chflags(dst, st.st_flags) |
| except OSError as why: |
| if (not hasattr(errno, 'EOPNOTSUPP') or |
| why.errno != errno.EOPNOTSUPP): |
| raise |
| |
| def copy(src, dst): |
| """Copy data and mode bits ("cp src dst"). |
| |
| The destination may be a directory. |
| |
| """ |
| if os.path.isdir(dst): |
| dst = os.path.join(dst, os.path.basename(src)) |
| copyfile(src, dst) |
| copymode(src, dst) |
| |
| def copy2(src, dst): |
| """Copy data and all stat info ("cp -p src dst"). |
| |
| The destination may be a directory. |
| |
| """ |
| if os.path.isdir(dst): |
| dst = os.path.join(dst, os.path.basename(src)) |
| copyfile(src, dst) |
| copystat(src, dst) |
| |
| def ignore_patterns(*patterns): |
| """Function that can be used as copytree() ignore parameter. |
| |
| Patterns is a sequence of glob-style patterns |
| that are used to exclude files""" |
| def _ignore_patterns(path, names): |
| ignored_names = [] |
| for pattern in patterns: |
| ignored_names.extend(fnmatch.filter(names, pattern)) |
| return set(ignored_names) |
| return _ignore_patterns |
| |
| def copytree(src, dst, symlinks=False, ignore=None, copy_function=copy2, |
| ignore_dangling_symlinks=False): |
| """Recursively copy a directory tree. |
| |
| The destination directory must not already exist. |
| If exception(s) occur, an Error is raised with a list of reasons. |
| |
| If the optional symlinks flag is true, symbolic links in the |
| source tree result in symbolic links in the destination tree; if |
| it is false, the contents of the files pointed to by symbolic |
| links are copied. If the file pointed by the symlink doesn't |
| exist, an exception will be added in the list of errors raised in |
| an Error exception at the end of the copy process. |
| |
| You can set the optional ignore_dangling_symlinks flag to true if you |
| want to silence this exception. Notice that this has no effect on |
| platforms that don't support os.symlink. |
| |
| The optional ignore argument is a callable. If given, it |
| is called with the `src` parameter, which is the directory |
| being visited by copytree(), and `names` which is the list of |
| `src` contents, as returned by os.listdir(): |
| |
| callable(src, names) -> ignored_names |
| |
| Since copytree() is called recursively, the callable will be |
| called once for each directory that is copied. It returns a |
| list of names relative to the `src` directory that should |
| not be copied. |
| |
| The optional copy_function argument is a callable that will be used |
| to copy each file. It will be called with the source path and the |
| destination path as arguments. By default, copy2() is used, but any |
| function that supports the same signature (like copy()) can be used. |
| |
| """ |
| names = os.listdir(src) |
| if ignore is not None: |
| ignored_names = ignore(src, names) |
| else: |
| ignored_names = set() |
| |
| os.makedirs(dst) |
| errors = [] |
| for name in names: |
| if name in ignored_names: |
| continue |
| srcname = os.path.join(src, name) |
| dstname = os.path.join(dst, name) |
| try: |
| if os.path.islink(srcname): |
| linkto = os.readlink(srcname) |
| if symlinks: |
| os.symlink(linkto, dstname) |
| else: |
| # ignore dangling symlink if the flag is on |
| if not os.path.exists(linkto) and ignore_dangling_symlinks: |
| continue |
| # otherwise let the copy occurs. copy2 will raise an error |
| copy_function(srcname, dstname) |
| elif os.path.isdir(srcname): |
| copytree(srcname, dstname, symlinks, ignore, copy_function) |
| else: |
| # Will raise a SpecialFileError for unsupported file types |
| copy_function(srcname, dstname) |
| # catch the Error from the recursive copytree so that we can |
| # continue with other files |
| except Error as err: |
| errors.extend(err.args[0]) |
| except EnvironmentError as why: |
| errors.append((srcname, dstname, str(why))) |
| try: |
| copystat(src, dst) |
| except OSError as why: |
| if WindowsError is not None and isinstance(why, WindowsError): |
| # Copying file access times may fail on Windows |
| pass |
| else: |
| errors.extend((src, dst, str(why))) |
| if errors: |
| raise Error(errors) |
| |
| def rmtree(path, ignore_errors=False, onerror=None): |
| """Recursively delete a directory tree. |
| |
| If ignore_errors is set, errors are ignored; otherwise, if onerror |
| is set, it is called to handle the error with arguments (func, |
| path, exc_info) where func is os.listdir, os.remove, or os.rmdir; |
| path is the argument to that function that caused it to fail; and |
| exc_info is a tuple returned by sys.exc_info(). If ignore_errors |
| is false and onerror is None, an exception is raised. |
| |
| """ |
| if ignore_errors: |
| def onerror(*args): |
| pass |
| elif onerror is None: |
| def onerror(*args): |
| raise |
| try: |
| if os.path.islink(path): |
| # symlinks to directories are forbidden, see bug #1669 |
| raise OSError("Cannot call rmtree on a symbolic link") |
| except OSError: |
| onerror(os.path.islink, path, sys.exc_info()) |
| # can't continue even if onerror hook returns |
| return |
| names = [] |
| try: |
| names = os.listdir(path) |
| except os.error as err: |
| onerror(os.listdir, path, sys.exc_info()) |
| for name in names: |
| fullname = os.path.join(path, name) |
| try: |
| mode = os.lstat(fullname).st_mode |
| except os.error: |
| mode = 0 |
| if stat.S_ISDIR(mode): |
| rmtree(fullname, ignore_errors, onerror) |
| else: |
| try: |
| os.remove(fullname) |
| except os.error as err: |
| onerror(os.remove, fullname, sys.exc_info()) |
| try: |
| os.rmdir(path) |
| except os.error: |
| onerror(os.rmdir, path, sys.exc_info()) |
| |
| |
| def _basename(path): |
| # A basename() variant which first strips the trailing slash, if present. |
| # Thus we always get the last component of the path, even for directories. |
| return os.path.basename(path.rstrip(os.path.sep)) |
| |
| def move(src, dst): |
| """Recursively move a file or directory to another location. This is |
| similar to the Unix "mv" command. |
| |
| If the destination is a directory or a symlink to a directory, the source |
| is moved inside the directory. The destination path must not already |
| exist. |
| |
| If the destination already exists but is not a directory, it may be |
| overwritten depending on os.rename() semantics. |
| |
| If the destination is on our current filesystem, then rename() is used. |
| Otherwise, src is copied to the destination and then removed. |
| A lot more could be done here... A look at a mv.c shows a lot of |
| the issues this implementation glosses over. |
| |
| """ |
| real_dst = dst |
| if os.path.isdir(dst): |
| real_dst = os.path.join(dst, _basename(src)) |
| if os.path.exists(real_dst): |
| raise Error("Destination path '%s' already exists" % real_dst) |
| try: |
| os.rename(src, real_dst) |
| except OSError: |
| if os.path.isdir(src): |
| if _destinsrc(src, dst): |
| raise Error("Cannot move a directory '%s' into itself '%s'." % (src, dst)) |
| copytree(src, real_dst, symlinks=True) |
| rmtree(src) |
| else: |
| copy2(src, real_dst) |
| os.unlink(src) |
| |
| def _destinsrc(src, dst): |
| src = abspath(src) |
| dst = abspath(dst) |
| if not src.endswith(os.path.sep): |
| src += os.path.sep |
| if not dst.endswith(os.path.sep): |
| dst += os.path.sep |
| return dst.startswith(src) |
| |
| def _get_gid(name): |
| """Returns a gid, given a group name.""" |
| if getgrnam is None or name is None: |
| return None |
| try: |
| result = getgrnam(name) |
| except KeyError: |
| result = None |
| if result is not None: |
| return result[2] |
| return None |
| |
| def _get_uid(name): |
| """Returns an uid, given a user name.""" |
| if getpwnam is None or name is None: |
| return None |
| try: |
| result = getpwnam(name) |
| except KeyError: |
| result = None |
| if result is not None: |
| return result[2] |
| return None |
| |
| def _make_tarball(base_name, base_dir, compress="gzip", verbose=0, dry_run=0, |
| owner=None, group=None, logger=None): |
| """Create a (possibly compressed) tar file from all the files under |
| 'base_dir'. |
| |
| 'compress' must be "gzip" (the default), "bzip2", or None. |
| |
| 'owner' and 'group' can be used to define an owner and a group for the |
| archive that is being built. If not provided, the current owner and group |
| will be used. |
| |
| The output tar file will be named 'base_name' + ".tar", possibly plus |
| the appropriate compression extension (".gz", or ".bz2"). |
| |
| Returns the output filename. |
| """ |
| tar_compression = {'gzip': 'gz', None: ''} |
| compress_ext = {'gzip': '.gz'} |
| |
| if _BZ2_SUPPORTED: |
| tar_compression['bzip2'] = 'bz2' |
| compress_ext['bzip2'] = '.bz2' |
| |
| # flags for compression program, each element of list will be an argument |
| if compress is not None and compress not in compress_ext.keys(): |
| raise ValueError("bad value for 'compress', or compression format not " |
| "supported : {0}".format(compress)) |
| |
| archive_name = base_name + '.tar' + compress_ext.get(compress, '') |
| archive_dir = os.path.dirname(archive_name) |
| |
| if not os.path.exists(archive_dir): |
| if logger is not None: |
| logger.info("creating %s" % archive_dir) |
| if not dry_run: |
| os.makedirs(archive_dir) |
| |
| # creating the tarball |
| if logger is not None: |
| logger.info('Creating tar archive') |
| |
| uid = _get_uid(owner) |
| gid = _get_gid(group) |
| |
| def _set_uid_gid(tarinfo): |
| if gid is not None: |
| tarinfo.gid = gid |
| tarinfo.gname = group |
| if uid is not None: |
| tarinfo.uid = uid |
| tarinfo.uname = owner |
| return tarinfo |
| |
| if not dry_run: |
| tar = tarfile.open(archive_name, 'w|%s' % tar_compression[compress]) |
| try: |
| tar.add(base_dir, filter=_set_uid_gid) |
| finally: |
| tar.close() |
| |
| return archive_name |
| |
| def _call_external_zip(base_dir, zip_filename, verbose=False, dry_run=False): |
| # XXX see if we want to keep an external call here |
| if verbose: |
| zipoptions = "-r" |
| else: |
| zipoptions = "-rq" |
| from distutils.errors import DistutilsExecError |
| from distutils.spawn import spawn |
| try: |
| spawn(["zip", zipoptions, zip_filename, base_dir], dry_run=dry_run) |
| except DistutilsExecError: |
| # XXX really should distinguish between "couldn't find |
| # external 'zip' command" and "zip failed". |
| raise ExecError("unable to create zip file '%s': " |
| "could neither import the 'zipfile' module nor " |
| "find a standalone zip utility") % zip_filename |
| |
| def _make_zipfile(base_name, base_dir, verbose=0, dry_run=0, logger=None): |
| """Create a zip file from all the files under 'base_dir'. |
| |
| The output zip file will be named 'base_name' + ".zip". Uses either the |
| "zipfile" Python module (if available) or the InfoZIP "zip" utility |
| (if installed and found on the default search path). If neither tool is |
| available, raises ExecError. Returns the name of the output zip |
| file. |
| """ |
| zip_filename = base_name + ".zip" |
| archive_dir = os.path.dirname(base_name) |
| |
| if not os.path.exists(archive_dir): |
| if logger is not None: |
| logger.info("creating %s", archive_dir) |
| if not dry_run: |
| os.makedirs(archive_dir) |
| |
| # If zipfile module is not available, try spawning an external 'zip' |
| # command. |
| try: |
| import zipfile |
| except ImportError: |
| zipfile = None |
| |
| if zipfile is None: |
| _call_external_zip(base_dir, zip_filename, verbose, dry_run) |
| else: |
| if logger is not None: |
| logger.info("creating '%s' and adding '%s' to it", |
| zip_filename, base_dir) |
| |
| if not dry_run: |
| zip = zipfile.ZipFile(zip_filename, "w", |
| compression=zipfile.ZIP_DEFLATED) |
| |
| for dirpath, dirnames, filenames in os.walk(base_dir): |
| for name in filenames: |
| path = os.path.normpath(os.path.join(dirpath, name)) |
| if os.path.isfile(path): |
| zip.write(path, path) |
| if logger is not None: |
| logger.info("adding '%s'", path) |
| zip.close() |
| |
| return zip_filename |
| |
| _ARCHIVE_FORMATS = { |
| 'gztar': (_make_tarball, [('compress', 'gzip')], "gzip'ed tar-file"), |
| 'bztar': (_make_tarball, [('compress', 'bzip2')], "bzip2'ed tar-file"), |
| 'tar': (_make_tarball, [('compress', None)], "uncompressed tar file"), |
| 'zip': (_make_zipfile, [],"ZIP file") |
| } |
| |
| if _BZ2_SUPPORTED: |
| _ARCHIVE_FORMATS['bztar'] = (_make_tarball, [('compress', 'bzip2')], |
| "bzip2'ed tar-file") |
| |
| def get_archive_formats(): |
| """Returns a list of supported formats for archiving and unarchiving. |
| |
| Each element of the returned sequence is a tuple (name, description) |
| """ |
| formats = [(name, registry[2]) for name, registry in |
| _ARCHIVE_FORMATS.items()] |
| formats.sort() |
| return formats |
| |
| def register_archive_format(name, function, extra_args=None, description=''): |
| """Registers an archive format. |
| |
| name is the name of the format. function is the callable that will be |
| used to create archives. If provided, extra_args is a sequence of |
| (name, value) tuples that will be passed as arguments to the callable. |
| description can be provided to describe the format, and will be returned |
| by the get_archive_formats() function. |
| """ |
| if extra_args is None: |
| extra_args = [] |
| if not isinstance(function, collections.Callable): |
| raise TypeError('The %s object is not callable' % function) |
| if not isinstance(extra_args, (tuple, list)): |
| raise TypeError('extra_args needs to be a sequence') |
| for element in extra_args: |
| if not isinstance(element, (tuple, list)) or len(element) !=2 : |
| raise TypeError('extra_args elements are : (arg_name, value)') |
| |
| _ARCHIVE_FORMATS[name] = (function, extra_args, description) |
| |
| def unregister_archive_format(name): |
| del _ARCHIVE_FORMATS[name] |
| |
| def make_archive(base_name, format, root_dir=None, base_dir=None, verbose=0, |
| dry_run=0, owner=None, group=None, logger=None): |
| """Create an archive file (eg. zip or tar). |
| |
| 'base_name' is the name of the file to create, minus any format-specific |
| extension; 'format' is the archive format: one of "zip", "tar", "bztar" |
| or "gztar". |
| |
| 'root_dir' is a directory that will be the root directory of the |
| archive; ie. we typically chdir into 'root_dir' before creating the |
| archive. 'base_dir' is the directory where we start archiving from; |
| ie. 'base_dir' will be the common prefix of all files and |
| directories in the archive. 'root_dir' and 'base_dir' both default |
| to the current directory. Returns the name of the archive file. |
| |
| 'owner' and 'group' are used when creating a tar archive. By default, |
| uses the current owner and group. |
| """ |
| save_cwd = os.getcwd() |
| if root_dir is not None: |
| if logger is not None: |
| logger.debug("changing into '%s'", root_dir) |
| base_name = os.path.abspath(base_name) |
| if not dry_run: |
| os.chdir(root_dir) |
| |
| if base_dir is None: |
| base_dir = os.curdir |
| |
| kwargs = {'dry_run': dry_run, 'logger': logger} |
| |
| try: |
| format_info = _ARCHIVE_FORMATS[format] |
| except KeyError: |
| raise ValueError("unknown archive format '%s'" % format) |
| |
| func = format_info[0] |
| for arg, val in format_info[1]: |
| kwargs[arg] = val |
| |
| if format != 'zip': |
| kwargs['owner'] = owner |
| kwargs['group'] = group |
| |
| try: |
| filename = func(base_name, base_dir, **kwargs) |
| finally: |
| if root_dir is not None: |
| if logger is not None: |
| logger.debug("changing back to '%s'", save_cwd) |
| os.chdir(save_cwd) |
| |
| return filename |
| |
| |
| def get_unpack_formats(): |
| """Returns a list of supported formats for unpacking. |
| |
| Each element of the returned sequence is a tuple |
| (name, extensions, description) |
| """ |
| formats = [(name, info[0], info[3]) for name, info in |
| _UNPACK_FORMATS.items()] |
| formats.sort() |
| return formats |
| |
| def _check_unpack_options(extensions, function, extra_args): |
| """Checks what gets registered as an unpacker.""" |
| # first make sure no other unpacker is registered for this extension |
| existing_extensions = {} |
| for name, info in _UNPACK_FORMATS.items(): |
| for ext in info[0]: |
| existing_extensions[ext] = name |
| |
| for extension in extensions: |
| if extension in existing_extensions: |
| msg = '%s is already registered for "%s"' |
| raise RegistryError(msg % (extension, |
| existing_extensions[extension])) |
| |
| if not isinstance(function, collections.Callable): |
| raise TypeError('The registered function must be a callable') |
| |
| |
| def register_unpack_format(name, extensions, function, extra_args=None, |
| description=''): |
| """Registers an unpack format. |
| |
| `name` is the name of the format. `extensions` is a list of extensions |
| corresponding to the format. |
| |
| `function` is the callable that will be |
| used to unpack archives. The callable will receive archives to unpack. |
| If it's unable to handle an archive, it needs to raise a ReadError |
| exception. |
| |
| If provided, `extra_args` is a sequence of |
| (name, value) tuples that will be passed as arguments to the callable. |
| description can be provided to describe the format, and will be returned |
| by the get_unpack_formats() function. |
| """ |
| if extra_args is None: |
| extra_args = [] |
| _check_unpack_options(extensions, function, extra_args) |
| _UNPACK_FORMATS[name] = extensions, function, extra_args, description |
| |
| def unregister_unpack_format(name): |
| """Removes the pack format from the registery.""" |
| del _UNPACK_FORMATS[name] |
| |
| def _ensure_directory(path): |
| """Ensure that the parent directory of `path` exists""" |
| dirname = os.path.dirname(path) |
| if not os.path.isdir(dirname): |
| os.makedirs(dirname) |
| |
| def _unpack_zipfile(filename, extract_dir): |
| """Unpack zip `filename` to `extract_dir` |
| """ |
| try: |
| import zipfile |
| except ImportError: |
| raise ReadError('zlib not supported, cannot unpack this archive.') |
| |
| if not zipfile.is_zipfile(filename): |
| raise ReadError("%s is not a zip file" % filename) |
| |
| zip = zipfile.ZipFile(filename) |
| try: |
| for info in zip.infolist(): |
| name = info.filename |
| |
| # don't extract absolute paths or ones with .. in them |
| if name.startswith('/') or '..' in name: |
| continue |
| |
| target = os.path.join(extract_dir, *name.split('/')) |
| if not target: |
| continue |
| |
| _ensure_directory(target) |
| if not name.endswith('/'): |
| # file |
| data = zip.read(info.filename) |
| f = open(target,'wb') |
| try: |
| f.write(data) |
| finally: |
| f.close() |
| del data |
| finally: |
| zip.close() |
| |
| def _unpack_tarfile(filename, extract_dir): |
| """Unpack tar/tar.gz/tar.bz2 `filename` to `extract_dir` |
| """ |
| try: |
| tarobj = tarfile.open(filename) |
| except tarfile.TarError: |
| raise ReadError( |
| "%s is not a compressed or uncompressed tar file" % filename) |
| try: |
| tarobj.extractall(extract_dir) |
| finally: |
| tarobj.close() |
| |
| _UNPACK_FORMATS = { |
| 'gztar': (['.tar.gz', '.tgz'], _unpack_tarfile, [], "gzip'ed tar-file"), |
| 'tar': (['.tar'], _unpack_tarfile, [], "uncompressed tar file"), |
| 'zip': (['.zip'], _unpack_zipfile, [], "ZIP file") |
| } |
| |
| if _BZ2_SUPPORTED: |
| _UNPACK_FORMATS['bztar'] = (['.bz2'], _unpack_tarfile, [], |
| "bzip2'ed tar-file") |
| |
| def _find_unpack_format(filename): |
| for name, info in _UNPACK_FORMATS.items(): |
| for extension in info[0]: |
| if filename.endswith(extension): |
| return name |
| return None |
| |
| def unpack_archive(filename, extract_dir=None, format=None): |
| """Unpack an archive. |
| |
| `filename` is the name of the archive. |
| |
| `extract_dir` is the name of the target directory, where the archive |
| is unpacked. If not provided, the current working directory is used. |
| |
| `format` is the archive format: one of "zip", "tar", or "gztar". Or any |
| other registered format. If not provided, unpack_archive will use the |
| filename extension and see if an unpacker was registered for that |
| extension. |
| |
| In case none is found, a ValueError is raised. |
| """ |
| if extract_dir is None: |
| extract_dir = os.getcwd() |
| |
| if format is not None: |
| try: |
| format_info = _UNPACK_FORMATS[format] |
| except KeyError: |
| raise ValueError("Unknown unpack format '{0}'".format(format)) |
| |
| func = format_info[0] |
| func(filename, extract_dir, **dict(format_info[1])) |
| else: |
| # we need to look at the registered unpackers supported extensions |
| format = _find_unpack_format(filename) |
| if format is None: |
| raise ReadError("Unknown archive format '{0}'".format(filename)) |
| |
| func = _UNPACK_FORMATS[format][1] |
| kwargs = dict(_UNPACK_FORMATS[format][2]) |
| func(filename, extract_dir, **kwargs) |