blob: 983d113f0a1bb216b6704ac4dfd1a2b75041e0d0 [file] [log] [blame]
.. highlightlang:: c
.. _arg-parsing:
Parsing arguments and building values
=====================================
These functions are useful when creating your own extensions functions and
methods. Additional information and examples are available in
:ref:`extending-index`.
The first three of these functions described, :c:func:`PyArg_ParseTuple`,
:c:func:`PyArg_ParseTupleAndKeywords`, and :c:func:`PyArg_Parse`, all use *format
strings* which are used to tell the function about the expected arguments. The
format strings use the same syntax for each of these functions.
-----------------
Parsing arguments
-----------------
A format string consists of zero or more "format units." A format unit
describes one Python object; it is usually a single character or a parenthesized
sequence of format units. With a few exceptions, a format unit that is not a
parenthesized sequence normally corresponds to a single address argument to
these functions. In the following description, the quoted form is the format
unit; the entry in (round) parentheses is the Python object type that matches
the format unit; and the entry in [square] brackets is the type of the C
variable(s) whose address should be passed.
Strings and buffers
-------------------
These formats allow accessing an object as a contiguous chunk of memory.
You don't have to provide raw storage for the returned unicode or bytes
area. Also, you won't have to release any memory yourself, except with the
``es``, ``es#``, ``et`` and ``et#`` formats.
However, when a :c:type:`Py_buffer` structure gets filled, the underlying
buffer is locked so that the caller can subsequently use the buffer even
inside a :c:type:`Py_BEGIN_ALLOW_THREADS` block without the risk of mutable data
being resized or destroyed. As a result, **you have to call**
:c:func:`PyBuffer_Release` after you have finished processing the data (or
in any early abort case).
Unless otherwise stated, buffers are not NUL-terminated.
.. note::
For all ``#`` variants of formats (``s#``, ``y#``, etc.), the type of
the length argument (int or :c:type:`Py_ssize_t`) is controlled by
defining the macro :c:macro:`PY_SSIZE_T_CLEAN` before including
:file:`Python.h`. If the macro was defined, length is a
:c:type:`Py_ssize_t` rather than an :c:type:`int`. This behavior will change
in a future Python version to only support :c:type:`Py_ssize_t` and
drop :c:type:`int` support. It is best to always define :c:macro:`PY_SSIZE_T_CLEAN`.
``s`` (:class:`str`) [const char \*]
Convert a Unicode object to a C pointer to a character string.
A pointer to an existing string is stored in the character pointer
variable whose address you pass. The C string is NUL-terminated.
The Python string must not contain embedded NUL bytes; if it does,
a :exc:`TypeError` exception is raised. Unicode objects are converted
to C strings using ``'utf-8'`` encoding. If this conversion fails, a
:exc:`UnicodeError` is raised.
.. note::
This format does not accept :term:`bytes-like objects
<bytes-like object>`. If you want to accept
filesystem paths and convert them to C character strings, it is
preferable to use the ``O&`` format with :c:func:`PyUnicode_FSConverter`
as *converter*.
``s*`` (:class:`str` or :term:`bytes-like object`) [Py_buffer]
This format accepts Unicode objects as well as bytes-like objects.
It fills a :c:type:`Py_buffer` structure provided by the caller.
In this case the resulting C string may contain embedded NUL bytes.
Unicode objects are converted to C strings using ``'utf-8'`` encoding.
``s#`` (:class:`str`, read-only :term:`bytes-like object`) [const char \*, int or :c:type:`Py_ssize_t`]
Like ``s*``, except that it doesn't accept mutable bytes-like objects
such as :class:`bytearray`. The result is stored into two C variables,
the first one a pointer to a C string, the second one its length.
The string may contain embedded null bytes. Unicode objects are converted
to C strings using ``'utf-8'`` encoding.
``z`` (:class:`str` or ``None``) [const char \*]
Like ``s``, but the Python object may also be ``None``, in which case the C
pointer is set to *NULL*.
``z*`` (:class:`str`, :term:`bytes-like object` or ``None``) [Py_buffer]
Like ``s*``, but the Python object may also be ``None``, in which case the
``buf`` member of the :c:type:`Py_buffer` structure is set to *NULL*.
``z#`` (:class:`str`, read-only :term:`bytes-like object` or ``None``) [const char \*, int]
Like ``s#``, but the Python object may also be ``None``, in which case the C
pointer is set to *NULL*.
``y`` (read-only :term:`bytes-like object`) [const char \*]
This format converts a bytes-like object to a C pointer to a character
string; it does not accept Unicode objects. The bytes buffer must not
contain embedded NUL bytes; if it does, a :exc:`TypeError`
exception is raised.
``y*`` (:term:`bytes-like object`) [Py_buffer]
This variant on ``s*`` doesn't accept Unicode objects, only
bytes-like objects. **This is the recommended way to accept
binary data.**
``y#`` (read-only :term:`bytes-like object`) [const char \*, int]
This variant on ``s#`` doesn't accept Unicode objects, only bytes-like
objects.
``S`` (:class:`bytes`) [PyBytesObject \*]
Requires that the Python object is a :class:`bytes` object, without
attempting any conversion. Raises :exc:`TypeError` if the object is not
a bytes object. The C variable may also be declared as :c:type:`PyObject\*`.
``Y`` (:class:`bytearray`) [PyByteArrayObject \*]
Requires that the Python object is a :class:`bytearray` object, without
attempting any conversion. Raises :exc:`TypeError` if the object is not
a :class:`bytearray` object. The C variable may also be declared as :c:type:`PyObject\*`.
``u`` (:class:`str`) [Py_UNICODE \*]
Convert a Python Unicode object to a C pointer to a NUL-terminated buffer of
Unicode characters. You must pass the address of a :c:type:`Py_UNICODE`
pointer variable, which will be filled with the pointer to an existing
Unicode buffer. Please note that the width of a :c:type:`Py_UNICODE`
character depends on compilation options (it is either 16 or 32 bits).
The Python string must not contain embedded NUL characters; if it does,
a :exc:`TypeError` exception is raised.
.. note::
Since ``u`` doesn't give you back the length of the string, and it
may contain embedded NUL characters, it is recommended to use ``u#``
or ``U`` instead.
``u#`` (:class:`str`) [Py_UNICODE \*, int]
This variant on ``u`` stores into two C variables, the first one a pointer to a
Unicode data buffer, the second one its length.
``Z`` (:class:`str` or ``None``) [Py_UNICODE \*]
Like ``u``, but the Python object may also be ``None``, in which case the
:c:type:`Py_UNICODE` pointer is set to *NULL*.
``Z#`` (:class:`str` or ``None``) [Py_UNICODE \*, int]
Like ``u#``, but the Python object may also be ``None``, in which case the
:c:type:`Py_UNICODE` pointer is set to *NULL*.
``U`` (:class:`str`) [PyObject \*]
Requires that the Python object is a Unicode object, without attempting
any conversion. Raises :exc:`TypeError` if the object is not a Unicode
object. The C variable may also be declared as :c:type:`PyObject\*`.
``w*`` (read-write :term:`bytes-like object`) [Py_buffer]
This format accepts any object which implements the read-write buffer
interface. It fills a :c:type:`Py_buffer` structure provided by the caller.
The buffer may contain embedded null bytes. The caller have to call
:c:func:`PyBuffer_Release` when it is done with the buffer.
``es`` (:class:`str`) [const char \*encoding, char \*\*buffer]
This variant on ``s`` is used for encoding Unicode into a character buffer.
It only works for encoded data without embedded NUL bytes.
This format requires two arguments. The first is only used as input, and
must be a :c:type:`const char\*` which points to the name of an encoding as a
NUL-terminated string, or *NULL*, in which case ``'utf-8'`` encoding is used.
An exception is raised if the named encoding is not known to Python. The
second argument must be a :c:type:`char\*\*`; the value of the pointer it
references will be set to a buffer with the contents of the argument text.
The text will be encoded in the encoding specified by the first argument.
:c:func:`PyArg_ParseTuple` will allocate a buffer of the needed size, copy the
encoded data into this buffer and adjust *\*buffer* to reference the newly
allocated storage. The caller is responsible for calling :c:func:`PyMem_Free` to
free the allocated buffer after use.
``et`` (:class:`str`, :class:`bytes` or :class:`bytearray`) [const char \*encoding, char \*\*buffer]
Same as ``es`` except that byte string objects are passed through without
recoding them. Instead, the implementation assumes that the byte string object uses
the encoding passed in as parameter.
``es#`` (:class:`str`) [const char \*encoding, char \*\*buffer, int \*buffer_length]
This variant on ``s#`` is used for encoding Unicode into a character buffer.
Unlike the ``es`` format, this variant allows input data which contains NUL
characters.
It requires three arguments. The first is only used as input, and must be a
:c:type:`const char\*` which points to the name of an encoding as a
NUL-terminated string, or *NULL*, in which case ``'utf-8'`` encoding is used.
An exception is raised if the named encoding is not known to Python. The
second argument must be a :c:type:`char\*\*`; the value of the pointer it
references will be set to a buffer with the contents of the argument text.
The text will be encoded in the encoding specified by the first argument.
The third argument must be a pointer to an integer; the referenced integer
will be set to the number of bytes in the output buffer.
There are two modes of operation:
If *\*buffer* points a *NULL* pointer, the function will allocate a buffer of
the needed size, copy the encoded data into this buffer and set *\*buffer* to
reference the newly allocated storage. The caller is responsible for calling
:c:func:`PyMem_Free` to free the allocated buffer after usage.
If *\*buffer* points to a non-*NULL* pointer (an already allocated buffer),
:c:func:`PyArg_ParseTuple` will use this location as the buffer and interpret the
initial value of *\*buffer_length* as the buffer size. It will then copy the
encoded data into the buffer and NUL-terminate it. If the buffer is not large
enough, a :exc:`TypeError` will be set.
Note: starting from Python 3.6 a :exc:`ValueError` will be set.
In both cases, *\*buffer_length* is set to the length of the encoded data
without the trailing NUL byte.
``et#`` (:class:`str`, :class:`bytes` or :class:`bytearray`) [const char \*encoding, char \*\*buffer, int \*buffer_length]
Same as ``es#`` except that byte string objects are passed through without recoding
them. Instead, the implementation assumes that the byte string object uses the
encoding passed in as parameter.
Numbers
-------
``b`` (:class:`int`) [unsigned char]
Convert a nonnegative Python integer to an unsigned tiny int, stored in a C
:c:type:`unsigned char`.
``B`` (:class:`int`) [unsigned char]
Convert a Python integer to a tiny int without overflow checking, stored in a C
:c:type:`unsigned char`.
``h`` (:class:`int`) [short int]
Convert a Python integer to a C :c:type:`short int`.
``H`` (:class:`int`) [unsigned short int]
Convert a Python integer to a C :c:type:`unsigned short int`, without overflow
checking.
``i`` (:class:`int`) [int]
Convert a Python integer to a plain C :c:type:`int`.
``I`` (:class:`int`) [unsigned int]
Convert a Python integer to a C :c:type:`unsigned int`, without overflow
checking.
``l`` (:class:`int`) [long int]
Convert a Python integer to a C :c:type:`long int`.
``k`` (:class:`int`) [unsigned long]
Convert a Python integer to a C :c:type:`unsigned long` without
overflow checking.
``L`` (:class:`int`) [PY_LONG_LONG]
Convert a Python integer to a C :c:type:`long long`. This format is only
available on platforms that support :c:type:`long long` (or :c:type:`_int64` on
Windows).
``K`` (:class:`int`) [unsigned PY_LONG_LONG]
Convert a Python integer to a C :c:type:`unsigned long long`
without overflow checking. This format is only available on platforms that
support :c:type:`unsigned long long` (or :c:type:`unsigned _int64` on Windows).
``n`` (:class:`int`) [Py_ssize_t]
Convert a Python integer to a C :c:type:`Py_ssize_t`.
``c`` (:class:`bytes` or :class:`bytearray` of length 1) [char]
Convert a Python byte, represented as a :class:`bytes` or
:class:`bytearray` object of length 1, to a C :c:type:`char`.
.. versionchanged:: 3.3
Allow :class:`bytearray` objects.
``C`` (:class:`str` of length 1) [int]
Convert a Python character, represented as a :class:`str` object of
length 1, to a C :c:type:`int`.
``f`` (:class:`float`) [float]
Convert a Python floating point number to a C :c:type:`float`.
``d`` (:class:`float`) [double]
Convert a Python floating point number to a C :c:type:`double`.
``D`` (:class:`complex`) [Py_complex]
Convert a Python complex number to a C :c:type:`Py_complex` structure.
Other objects
-------------
``O`` (object) [PyObject \*]
Store a Python object (without any conversion) in a C object pointer. The C
program thus receives the actual object that was passed. The object's reference
count is not increased. The pointer stored is not *NULL*.
``O!`` (object) [*typeobject*, PyObject \*]
Store a Python object in a C object pointer. This is similar to ``O``, but
takes two C arguments: the first is the address of a Python type object, the
second is the address of the C variable (of type :c:type:`PyObject\*`) into which
the object pointer is stored. If the Python object does not have the required
type, :exc:`TypeError` is raised.
.. _o_ampersand:
``O&`` (object) [*converter*, *anything*]
Convert a Python object to a C variable through a *converter* function. This
takes two arguments: the first is a function, the second is the address of a C
variable (of arbitrary type), converted to :c:type:`void \*`. The *converter*
function in turn is called as follows::
status = converter(object, address);
where *object* is the Python object to be converted and *address* is the
:c:type:`void\*` argument that was passed to the :c:func:`PyArg_Parse\*` function.
The returned *status* should be ``1`` for a successful conversion and ``0`` if
the conversion has failed. When the conversion fails, the *converter* function
should raise an exception and leave the content of *address* unmodified.
If the *converter* returns ``Py_CLEANUP_SUPPORTED``, it may get called a
second time if the argument parsing eventually fails, giving the converter a
chance to release any memory that it had already allocated. In this second
call, the *object* parameter will be NULL; *address* will have the same value
as in the original call.
.. versionchanged:: 3.1
``Py_CLEANUP_SUPPORTED`` was added.
``p`` (:class:`bool`) [int]
Tests the value passed in for truth (a boolean **p**\ redicate) and converts
the result to its equivalent C true/false integer value.
Sets the int to 1 if the expression was true and 0 if it was false.
This accepts any valid Python value. See :ref:`truth` for more
information about how Python tests values for truth.
.. versionadded:: 3.3
``(items)`` (:class:`tuple`) [*matching-items*]
The object must be a Python sequence whose length is the number of format units
in *items*. The C arguments must correspond to the individual format units in
*items*. Format units for sequences may be nested.
It is possible to pass "long" integers (integers whose value exceeds the
platform's :const:`LONG_MAX`) however no proper range checking is done --- the
most significant bits are silently truncated when the receiving field is too
small to receive the value (actually, the semantics are inherited from downcasts
in C --- your mileage may vary).
A few other characters have a meaning in a format string. These may not occur
inside nested parentheses. They are:
``|``
Indicates that the remaining arguments in the Python argument list are optional.
The C variables corresponding to optional arguments should be initialized to
their default value --- when an optional argument is not specified,
:c:func:`PyArg_ParseTuple` does not touch the contents of the corresponding C
variable(s).
``$``
:c:func:`PyArg_ParseTupleAndKeywords` only:
Indicates that the remaining arguments in the Python argument list are
keyword-only. Currently, all keyword-only arguments must also be optional
arguments, so ``|`` must always be specified before ``$`` in the format
string.
.. versionadded:: 3.3
``:``
The list of format units ends here; the string after the colon is used as the
function name in error messages (the "associated value" of the exception that
:c:func:`PyArg_ParseTuple` raises).
``;``
The list of format units ends here; the string after the semicolon is used as
the error message *instead* of the default error message. ``:`` and ``;``
mutually exclude each other.
Note that any Python object references which are provided to the caller are
*borrowed* references; do not decrement their reference count!
Additional arguments passed to these functions must be addresses of variables
whose type is determined by the format string; these are used to store values
from the input tuple. There are a few cases, as described in the list of format
units above, where these parameters are used as input values; they should match
what is specified for the corresponding format unit in that case.
For the conversion to succeed, the *arg* object must match the format
and the format must be exhausted. On success, the
:c:func:`PyArg_Parse\*` functions return true, otherwise they return
false and raise an appropriate exception. When the
:c:func:`PyArg_Parse\*` functions fail due to conversion failure in one
of the format units, the variables at the addresses corresponding to that
and the following format units are left untouched.
API Functions
-------------
.. c:function:: int PyArg_ParseTuple(PyObject *args, const char *format, ...)
Parse the parameters of a function that takes only positional parameters into
local variables. Returns true on success; on failure, it returns false and
raises the appropriate exception.
.. c:function:: int PyArg_VaParse(PyObject *args, const char *format, va_list vargs)
Identical to :c:func:`PyArg_ParseTuple`, except that it accepts a va_list rather
than a variable number of arguments.
.. c:function:: int PyArg_ParseTupleAndKeywords(PyObject *args, PyObject *kw, const char *format, char *keywords[], ...)
Parse the parameters of a function that takes both positional and keyword
parameters into local variables. Returns true on success; on failure, it
returns false and raises the appropriate exception.
.. c:function:: int PyArg_VaParseTupleAndKeywords(PyObject *args, PyObject *kw, const char *format, char *keywords[], va_list vargs)
Identical to :c:func:`PyArg_ParseTupleAndKeywords`, except that it accepts a
va_list rather than a variable number of arguments.
.. c:function:: int PyArg_ValidateKeywordArguments(PyObject *)
Ensure that the keys in the keywords argument dictionary are strings. This
is only needed if :c:func:`PyArg_ParseTupleAndKeywords` is not used, since the
latter already does this check.
.. versionadded:: 3.2
.. XXX deprecated, will be removed
.. c:function:: int PyArg_Parse(PyObject *args, const char *format, ...)
Function used to deconstruct the argument lists of "old-style" functions ---
these are functions which use the :const:`METH_OLDARGS` parameter parsing
method, which has been removed in Python 3. This is not recommended for use
in parameter parsing in new code, and most code in the standard interpreter
has been modified to no longer use this for that purpose. It does remain a
convenient way to decompose other tuples, however, and may continue to be
used for that purpose.
.. c:function:: int PyArg_UnpackTuple(PyObject *args, const char *name, Py_ssize_t min, Py_ssize_t max, ...)
A simpler form of parameter retrieval which does not use a format string to
specify the types of the arguments. Functions which use this method to retrieve
their parameters should be declared as :const:`METH_VARARGS` in function or
method tables. The tuple containing the actual parameters should be passed as
*args*; it must actually be a tuple. The length of the tuple must be at least
*min* and no more than *max*; *min* and *max* may be equal. Additional
arguments must be passed to the function, each of which should be a pointer to a
:c:type:`PyObject\*` variable; these will be filled in with the values from
*args*; they will contain borrowed references. The variables which correspond
to optional parameters not given by *args* will not be filled in; these should
be initialized by the caller. This function returns true on success and false if
*args* is not a tuple or contains the wrong number of elements; an exception
will be set if there was a failure.
This is an example of the use of this function, taken from the sources for the
:mod:`_weakref` helper module for weak references::
static PyObject *
weakref_ref(PyObject *self, PyObject *args)
{
PyObject *object;
PyObject *callback = NULL;
PyObject *result = NULL;
if (PyArg_UnpackTuple(args, "ref", 1, 2, &object, &callback)) {
result = PyWeakref_NewRef(object, callback);
}
return result;
}
The call to :c:func:`PyArg_UnpackTuple` in this example is entirely equivalent to
this call to :c:func:`PyArg_ParseTuple`::
PyArg_ParseTuple(args, "O|O:ref", &object, &callback)
---------------
Building values
---------------
.. c:function:: PyObject* Py_BuildValue(const char *format, ...)
Create a new value based on a format string similar to those accepted by the
:c:func:`PyArg_Parse\*` family of functions and a sequence of values. Returns
the value or *NULL* in the case of an error; an exception will be raised if
*NULL* is returned.
:c:func:`Py_BuildValue` does not always build a tuple. It builds a tuple only if
its format string contains two or more format units. If the format string is
empty, it returns ``None``; if it contains exactly one format unit, it returns
whatever object is described by that format unit. To force it to return a tuple
of size 0 or one, parenthesize the format string.
When memory buffers are passed as parameters to supply data to build objects, as
for the ``s`` and ``s#`` formats, the required data is copied. Buffers provided
by the caller are never referenced by the objects created by
:c:func:`Py_BuildValue`. In other words, if your code invokes :c:func:`malloc`
and passes the allocated memory to :c:func:`Py_BuildValue`, your code is
responsible for calling :c:func:`free` for that memory once
:c:func:`Py_BuildValue` returns.
In the following description, the quoted form is the format unit; the entry in
(round) parentheses is the Python object type that the format unit will return;
and the entry in [square] brackets is the type of the C value(s) to be passed.
The characters space, tab, colon and comma are ignored in format strings (but
not within format units such as ``s#``). This can be used to make long format
strings a tad more readable.
``s`` (:class:`str` or ``None``) [char \*]
Convert a null-terminated C string to a Python :class:`str` object using ``'utf-8'``
encoding. If the C string pointer is *NULL*, ``None`` is used.
``s#`` (:class:`str` or ``None``) [char \*, int]
Convert a C string and its length to a Python :class:`str` object using ``'utf-8'``
encoding. If the C string pointer is *NULL*, the length is ignored and
``None`` is returned.
``y`` (:class:`bytes`) [char \*]
This converts a C string to a Python :class:`bytes` object. If the C
string pointer is *NULL*, ``None`` is returned.
``y#`` (:class:`bytes`) [char \*, int]
This converts a C string and its lengths to a Python object. If the C
string pointer is *NULL*, ``None`` is returned.
``z`` (:class:`str` or ``None``) [char \*]
Same as ``s``.
``z#`` (:class:`str` or ``None``) [char \*, int]
Same as ``s#``.
``u`` (:class:`str`) [Py_UNICODE \*]
Convert a null-terminated buffer of Unicode (UCS-2 or UCS-4) data to a Python
Unicode object. If the Unicode buffer pointer is *NULL*, ``None`` is returned.
``u#`` (:class:`str`) [Py_UNICODE \*, int]
Convert a Unicode (UCS-2 or UCS-4) data buffer and its length to a Python
Unicode object. If the Unicode buffer pointer is *NULL*, the length is ignored
and ``None`` is returned.
``U`` (:class:`str` or ``None``) [char \*]
Same as ``s``.
``U#`` (:class:`str` or ``None``) [char \*, int]
Same as ``s#``.
``i`` (:class:`int`) [int]
Convert a plain C :c:type:`int` to a Python integer object.
``b`` (:class:`int`) [char]
Convert a plain C :c:type:`char` to a Python integer object.
``h`` (:class:`int`) [short int]
Convert a plain C :c:type:`short int` to a Python integer object.
``l`` (:class:`int`) [long int]
Convert a C :c:type:`long int` to a Python integer object.
``B`` (:class:`int`) [unsigned char]
Convert a C :c:type:`unsigned char` to a Python integer object.
``H`` (:class:`int`) [unsigned short int]
Convert a C :c:type:`unsigned short int` to a Python integer object.
``I`` (:class:`int`) [unsigned int]
Convert a C :c:type:`unsigned int` to a Python integer object.
``k`` (:class:`int`) [unsigned long]
Convert a C :c:type:`unsigned long` to a Python integer object.
``L`` (:class:`int`) [PY_LONG_LONG]
Convert a C :c:type:`long long` to a Python integer object. Only available
on platforms that support :c:type:`long long` (or :c:type:`_int64` on
Windows).
``K`` (:class:`int`) [unsigned PY_LONG_LONG]
Convert a C :c:type:`unsigned long long` to a Python integer object. Only
available on platforms that support :c:type:`unsigned long long` (or
:c:type:`unsigned _int64` on Windows).
``n`` (:class:`int`) [Py_ssize_t]
Convert a C :c:type:`Py_ssize_t` to a Python integer.
``c`` (:class:`bytes` of length 1) [char]
Convert a C :c:type:`int` representing a byte to a Python :class:`bytes` object of
length 1.
``C`` (:class:`str` of length 1) [int]
Convert a C :c:type:`int` representing a character to Python :class:`str`
object of length 1.
``d`` (:class:`float`) [double]
Convert a C :c:type:`double` to a Python floating point number.
``f`` (:class:`float`) [float]
Convert a C :c:type:`float` to a Python floating point number.
``D`` (:class:`complex`) [Py_complex \*]
Convert a C :c:type:`Py_complex` structure to a Python complex number.
``O`` (object) [PyObject \*]
Pass a Python object untouched (except for its reference count, which is
incremented by one). If the object passed in is a *NULL* pointer, it is assumed
that this was caused because the call producing the argument found an error and
set an exception. Therefore, :c:func:`Py_BuildValue` will return *NULL* but won't
raise an exception. If no exception has been raised yet, :exc:`SystemError` is
set.
``S`` (object) [PyObject \*]
Same as ``O``.
``N`` (object) [PyObject \*]
Same as ``O``, except it doesn't increment the reference count on the object.
Useful when the object is created by a call to an object constructor in the
argument list.
``O&`` (object) [*converter*, *anything*]
Convert *anything* to a Python object through a *converter* function. The
function is called with *anything* (which should be compatible with :c:type:`void
\*`) as its argument and should return a "new" Python object, or *NULL* if an
error occurred.
``(items)`` (:class:`tuple`) [*matching-items*]
Convert a sequence of C values to a Python tuple with the same number of items.
``[items]`` (:class:`list`) [*matching-items*]
Convert a sequence of C values to a Python list with the same number of items.
``{items}`` (:class:`dict`) [*matching-items*]
Convert a sequence of C values to a Python dictionary. Each pair of consecutive
C values adds one item to the dictionary, serving as key and value,
respectively.
If there is an error in the format string, the :exc:`SystemError` exception is
set and *NULL* returned.
.. c:function:: PyObject* Py_VaBuildValue(const char *format, va_list vargs)
Identical to :c:func:`Py_BuildValue`, except that it accepts a va_list
rather than a variable number of arguments.