| """Parse (absolute and relative) URLs. |
| |
| urlparse module is based upon the following RFC specifications. |
| |
| RFC 3986 (STD66): "Uniform Resource Identifiers" by T. Berners-Lee, R. Fielding |
| and L. Masinter, January 2005. |
| |
| RFC 2732 : "Format for Literal IPv6 Addresses in URL's by R.Hinden, B.Carpenter |
| and L.Masinter, December 1999. |
| |
| RFC 2396: "Uniform Resource Identifiers (URI)": Generic Syntax by T. |
| Berners-Lee, R. Fielding, and L. Masinter, August 1998. |
| |
| RFC 2368: "The mailto URL scheme", by P.Hoffman , L Masinter, J. Zawinski, July 1998. |
| |
| RFC 1808: "Relative Uniform Resource Locators", by R. Fielding, UC Irvine, June |
| 1995. |
| |
| RFC 1738: "Uniform Resource Locators (URL)" by T. Berners-Lee, L. Masinter, M. |
| McCahill, December 1994 |
| |
| RFC 3986 is considered the current standard and any future changes to |
| urlparse module should conform with it. The urlparse module is |
| currently not entirely compliant with this RFC due to defacto |
| scenarios for parsing, and for backward compatibility purposes, some |
| parsing quirks from older RFCs are retained. The testcases in |
| test_urlparse.py provides a good indicator of parsing behavior. |
| """ |
| |
| import sys |
| import collections |
| |
| __all__ = ["urlparse", "urlunparse", "urljoin", "urldefrag", |
| "urlsplit", "urlunsplit", "urlencode", "parse_qs", |
| "parse_qsl", "quote", "quote_plus", "quote_from_bytes", |
| "unquote", "unquote_plus", "unquote_to_bytes"] |
| |
| # A classification of schemes ('' means apply by default) |
| uses_relative = ['ftp', 'http', 'gopher', 'nntp', 'imap', |
| 'wais', 'file', 'https', 'shttp', 'mms', |
| 'prospero', 'rtsp', 'rtspu', '', 'sftp'] |
| uses_netloc = ['ftp', 'http', 'gopher', 'nntp', 'telnet', |
| 'imap', 'wais', 'file', 'mms', 'https', 'shttp', |
| 'snews', 'prospero', 'rtsp', 'rtspu', 'rsync', '', |
| 'svn', 'svn+ssh', 'sftp', 'nfs', 'git', 'git+ssh'] |
| non_hierarchical = ['gopher', 'hdl', 'mailto', 'news', |
| 'telnet', 'wais', 'imap', 'snews', 'sip', 'sips'] |
| uses_params = ['ftp', 'hdl', 'prospero', 'http', 'imap', |
| 'https', 'shttp', 'rtsp', 'rtspu', 'sip', 'sips', |
| 'mms', '', 'sftp'] |
| uses_query = ['http', 'wais', 'imap', 'https', 'shttp', 'mms', |
| 'gopher', 'rtsp', 'rtspu', 'sip', 'sips', ''] |
| uses_fragment = ['ftp', 'hdl', 'http', 'gopher', 'news', |
| 'nntp', 'wais', 'https', 'shttp', 'snews', |
| 'file', 'prospero', ''] |
| |
| # Characters valid in scheme names |
| scheme_chars = ('abcdefghijklmnopqrstuvwxyz' |
| 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' |
| '0123456789' |
| '+-.') |
| |
| # XXX: Consider replacing with functools.lru_cache |
| MAX_CACHE_SIZE = 20 |
| _parse_cache = {} |
| |
| def clear_cache(): |
| """Clear the parse cache and the quoters cache.""" |
| _parse_cache.clear() |
| _safe_quoters.clear() |
| |
| |
| # Helpers for bytes handling |
| # For 3.2, we deliberately require applications that |
| # handle improperly quoted URLs to do their own |
| # decoding and encoding. If valid use cases are |
| # presented, we may relax this by using latin-1 |
| # decoding internally for 3.3 |
| _implicit_encoding = 'ascii' |
| _implicit_errors = 'strict' |
| |
| def _noop(obj): |
| return obj |
| |
| def _encode_result(obj, encoding=_implicit_encoding, |
| errors=_implicit_errors): |
| return obj.encode(encoding, errors) |
| |
| def _decode_args(args, encoding=_implicit_encoding, |
| errors=_implicit_errors): |
| return tuple(x.decode(encoding, errors) if x else '' for x in args) |
| |
| def _coerce_args(*args): |
| # Invokes decode if necessary to create str args |
| # and returns the coerced inputs along with |
| # an appropriate result coercion function |
| # - noop for str inputs |
| # - encoding function otherwise |
| str_input = isinstance(args[0], str) |
| for arg in args[1:]: |
| # We special-case the empty string to support the |
| # "scheme=''" default argument to some functions |
| if arg and isinstance(arg, str) != str_input: |
| raise TypeError("Cannot mix str and non-str arguments") |
| if str_input: |
| return args + (_noop,) |
| return _decode_args(args) + (_encode_result,) |
| |
| # Result objects are more helpful than simple tuples |
| class _ResultMixinStr(object): |
| """Standard approach to encoding parsed results from str to bytes""" |
| __slots__ = () |
| |
| def encode(self, encoding='ascii', errors='strict'): |
| return self._encoded_counterpart(*(x.encode(encoding, errors) for x in self)) |
| |
| |
| class _ResultMixinBytes(object): |
| """Standard approach to decoding parsed results from bytes to str""" |
| __slots__ = () |
| |
| def decode(self, encoding='ascii', errors='strict'): |
| return self._decoded_counterpart(*(x.decode(encoding, errors) for x in self)) |
| |
| |
| class _NetlocResultMixinBase(object): |
| """Shared methods for the parsed result objects containing a netloc element""" |
| __slots__ = () |
| |
| @property |
| def username(self): |
| return self._userinfo[0] |
| |
| @property |
| def password(self): |
| return self._userinfo[1] |
| |
| @property |
| def hostname(self): |
| hostname = self._hostinfo[0] |
| if not hostname: |
| hostname = None |
| elif hostname is not None: |
| hostname = hostname.lower() |
| return hostname |
| |
| @property |
| def port(self): |
| port = self._hostinfo[1] |
| if port is not None: |
| port = int(port, 10) |
| return port |
| |
| |
| class _NetlocResultMixinStr(_NetlocResultMixinBase, _ResultMixinStr): |
| __slots__ = () |
| |
| @property |
| def _userinfo(self): |
| netloc = self.netloc |
| userinfo, have_info, hostinfo = netloc.rpartition('@') |
| if have_info: |
| username, have_password, password = userinfo.partition(':') |
| if not have_password: |
| password = None |
| else: |
| username = password = None |
| return username, password |
| |
| @property |
| def _hostinfo(self): |
| netloc = self.netloc |
| _, _, hostinfo = netloc.rpartition('@') |
| _, have_open_br, bracketed = hostinfo.partition('[') |
| if have_open_br: |
| hostname, _, port = bracketed.partition(']') |
| _, have_port, port = port.partition(':') |
| else: |
| hostname, have_port, port = hostinfo.partition(':') |
| if not have_port: |
| port = None |
| return hostname, port |
| |
| |
| class _NetlocResultMixinBytes(_NetlocResultMixinBase, _ResultMixinBytes): |
| __slots__ = () |
| |
| @property |
| def _userinfo(self): |
| netloc = self.netloc |
| userinfo, have_info, hostinfo = netloc.rpartition(b'@') |
| if have_info: |
| username, have_password, password = userinfo.partition(b':') |
| if not have_password: |
| password = None |
| else: |
| username = password = None |
| return username, password |
| |
| @property |
| def _hostinfo(self): |
| netloc = self.netloc |
| _, _, hostinfo = netloc.rpartition(b'@') |
| _, have_open_br, bracketed = hostinfo.partition(b'[') |
| if have_open_br: |
| hostname, _, port = bracketed.partition(b']') |
| _, have_port, port = port.partition(b':') |
| else: |
| hostname, have_port, port = hostinfo.partition(b':') |
| if not have_port: |
| port = None |
| return hostname, port |
| |
| |
| from collections import namedtuple |
| |
| _DefragResultBase = namedtuple('DefragResult', 'url fragment') |
| _SplitResultBase = namedtuple('SplitResult', 'scheme netloc path query fragment') |
| _ParseResultBase = namedtuple('ParseResult', 'scheme netloc path params query fragment') |
| |
| # For backwards compatibility, alias _NetlocResultMixinStr |
| # ResultBase is no longer part of the documented API, but it is |
| # retained since deprecating it isn't worth the hassle |
| ResultBase = _NetlocResultMixinStr |
| |
| # Structured result objects for string data |
| class DefragResult(_DefragResultBase, _ResultMixinStr): |
| __slots__ = () |
| def geturl(self): |
| if self.fragment: |
| return self.url + '#' + self.fragment |
| else: |
| return self.url |
| |
| class SplitResult(_SplitResultBase, _NetlocResultMixinStr): |
| __slots__ = () |
| def geturl(self): |
| return urlunsplit(self) |
| |
| class ParseResult(_ParseResultBase, _NetlocResultMixinStr): |
| __slots__ = () |
| def geturl(self): |
| return urlunparse(self) |
| |
| # Structured result objects for bytes data |
| class DefragResultBytes(_DefragResultBase, _ResultMixinBytes): |
| __slots__ = () |
| def geturl(self): |
| if self.fragment: |
| return self.url + b'#' + self.fragment |
| else: |
| return self.url |
| |
| class SplitResultBytes(_SplitResultBase, _NetlocResultMixinBytes): |
| __slots__ = () |
| def geturl(self): |
| return urlunsplit(self) |
| |
| class ParseResultBytes(_ParseResultBase, _NetlocResultMixinBytes): |
| __slots__ = () |
| def geturl(self): |
| return urlunparse(self) |
| |
| # Set up the encode/decode result pairs |
| def _fix_result_transcoding(): |
| _result_pairs = ( |
| (DefragResult, DefragResultBytes), |
| (SplitResult, SplitResultBytes), |
| (ParseResult, ParseResultBytes), |
| ) |
| for _decoded, _encoded in _result_pairs: |
| _decoded._encoded_counterpart = _encoded |
| _encoded._decoded_counterpart = _decoded |
| |
| _fix_result_transcoding() |
| del _fix_result_transcoding |
| |
| def urlparse(url, scheme='', allow_fragments=True): |
| """Parse a URL into 6 components: |
| <scheme>://<netloc>/<path>;<params>?<query>#<fragment> |
| Return a 6-tuple: (scheme, netloc, path, params, query, fragment). |
| Note that we don't break the components up in smaller bits |
| (e.g. netloc is a single string) and we don't expand % escapes.""" |
| url, scheme, _coerce_result = _coerce_args(url, scheme) |
| tuple = urlsplit(url, scheme, allow_fragments) |
| scheme, netloc, url, query, fragment = tuple |
| if scheme in uses_params and ';' in url: |
| url, params = _splitparams(url) |
| else: |
| params = '' |
| result = ParseResult(scheme, netloc, url, params, query, fragment) |
| return _coerce_result(result) |
| |
| def _splitparams(url): |
| if '/' in url: |
| i = url.find(';', url.rfind('/')) |
| if i < 0: |
| return url, '' |
| else: |
| i = url.find(';') |
| return url[:i], url[i+1:] |
| |
| def _splitnetloc(url, start=0): |
| delim = len(url) # position of end of domain part of url, default is end |
| for c in '/?#': # look for delimiters; the order is NOT important |
| wdelim = url.find(c, start) # find first of this delim |
| if wdelim >= 0: # if found |
| delim = min(delim, wdelim) # use earliest delim position |
| return url[start:delim], url[delim:] # return (domain, rest) |
| |
| def urlsplit(url, scheme='', allow_fragments=True): |
| """Parse a URL into 5 components: |
| <scheme>://<netloc>/<path>?<query>#<fragment> |
| Return a 5-tuple: (scheme, netloc, path, query, fragment). |
| Note that we don't break the components up in smaller bits |
| (e.g. netloc is a single string) and we don't expand % escapes.""" |
| url, scheme, _coerce_result = _coerce_args(url, scheme) |
| allow_fragments = bool(allow_fragments) |
| key = url, scheme, allow_fragments, type(url), type(scheme) |
| cached = _parse_cache.get(key, None) |
| if cached: |
| return _coerce_result(cached) |
| if len(_parse_cache) >= MAX_CACHE_SIZE: # avoid runaway growth |
| clear_cache() |
| netloc = query = fragment = '' |
| i = url.find(':') |
| if i > 0: |
| if url[:i] == 'http': # optimize the common case |
| scheme = url[:i].lower() |
| url = url[i+1:] |
| if url[:2] == '//': |
| netloc, url = _splitnetloc(url, 2) |
| if (('[' in netloc and ']' not in netloc) or |
| (']' in netloc and '[' not in netloc)): |
| raise ValueError("Invalid IPv6 URL") |
| if allow_fragments and '#' in url: |
| url, fragment = url.split('#', 1) |
| if '?' in url: |
| url, query = url.split('?', 1) |
| v = SplitResult(scheme, netloc, url, query, fragment) |
| _parse_cache[key] = v |
| return _coerce_result(v) |
| if url.endswith(':') or not url[i+1].isdigit(): |
| for c in url[:i]: |
| if c not in scheme_chars: |
| break |
| else: |
| scheme, url = url[:i].lower(), url[i+1:] |
| if url[:2] == '//': |
| netloc, url = _splitnetloc(url, 2) |
| if (('[' in netloc and ']' not in netloc) or |
| (']' in netloc and '[' not in netloc)): |
| raise ValueError("Invalid IPv6 URL") |
| if allow_fragments and scheme in uses_fragment and '#' in url: |
| url, fragment = url.split('#', 1) |
| if scheme in uses_query and '?' in url: |
| url, query = url.split('?', 1) |
| v = SplitResult(scheme, netloc, url, query, fragment) |
| _parse_cache[key] = v |
| return _coerce_result(v) |
| |
| def urlunparse(components): |
| """Put a parsed URL back together again. This may result in a |
| slightly different, but equivalent URL, if the URL that was parsed |
| originally had redundant delimiters, e.g. a ? with an empty query |
| (the draft states that these are equivalent).""" |
| scheme, netloc, url, params, query, fragment, _coerce_result = ( |
| _coerce_args(*components)) |
| if params: |
| url = "%s;%s" % (url, params) |
| return _coerce_result(urlunsplit((scheme, netloc, url, query, fragment))) |
| |
| def urlunsplit(components): |
| """Combine the elements of a tuple as returned by urlsplit() into a |
| complete URL as a string. The data argument can be any five-item iterable. |
| This may result in a slightly different, but equivalent URL, if the URL that |
| was parsed originally had unnecessary delimiters (for example, a ? with an |
| empty query; the RFC states that these are equivalent).""" |
| scheme, netloc, url, query, fragment, _coerce_result = ( |
| _coerce_args(*components)) |
| if netloc or (scheme and scheme in uses_netloc and url[:2] != '//'): |
| if url and url[:1] != '/': url = '/' + url |
| url = '//' + (netloc or '') + url |
| if scheme: |
| url = scheme + ':' + url |
| if query: |
| url = url + '?' + query |
| if fragment: |
| url = url + '#' + fragment |
| return _coerce_result(url) |
| |
| def urljoin(base, url, allow_fragments=True): |
| """Join a base URL and a possibly relative URL to form an absolute |
| interpretation of the latter.""" |
| if not base: |
| return url |
| if not url: |
| return base |
| base, url, _coerce_result = _coerce_args(base, url) |
| bscheme, bnetloc, bpath, bparams, bquery, bfragment = \ |
| urlparse(base, '', allow_fragments) |
| scheme, netloc, path, params, query, fragment = \ |
| urlparse(url, bscheme, allow_fragments) |
| if scheme != bscheme or scheme not in uses_relative: |
| return _coerce_result(url) |
| if scheme in uses_netloc: |
| if netloc: |
| return _coerce_result(urlunparse((scheme, netloc, path, |
| params, query, fragment))) |
| netloc = bnetloc |
| if path[:1] == '/': |
| return _coerce_result(urlunparse((scheme, netloc, path, |
| params, query, fragment))) |
| if not path and not params: |
| path = bpath |
| params = bparams |
| if not query: |
| query = bquery |
| return _coerce_result(urlunparse((scheme, netloc, path, |
| params, query, fragment))) |
| segments = bpath.split('/')[:-1] + path.split('/') |
| # XXX The stuff below is bogus in various ways... |
| if segments[-1] == '.': |
| segments[-1] = '' |
| while '.' in segments: |
| segments.remove('.') |
| while 1: |
| i = 1 |
| n = len(segments) - 1 |
| while i < n: |
| if (segments[i] == '..' |
| and segments[i-1] not in ('', '..')): |
| del segments[i-1:i+1] |
| break |
| i = i+1 |
| else: |
| break |
| if segments == ['', '..']: |
| segments[-1] = '' |
| elif len(segments) >= 2 and segments[-1] == '..': |
| segments[-2:] = [''] |
| return _coerce_result(urlunparse((scheme, netloc, '/'.join(segments), |
| params, query, fragment))) |
| |
| def urldefrag(url): |
| """Removes any existing fragment from URL. |
| |
| Returns a tuple of the defragmented URL and the fragment. If |
| the URL contained no fragments, the second element is the |
| empty string. |
| """ |
| url, _coerce_result = _coerce_args(url) |
| if '#' in url: |
| s, n, p, a, q, frag = urlparse(url) |
| defrag = urlunparse((s, n, p, a, q, '')) |
| else: |
| frag = '' |
| defrag = url |
| return _coerce_result(DefragResult(defrag, frag)) |
| |
| def unquote_to_bytes(string): |
| """unquote_to_bytes('abc%20def') -> b'abc def'.""" |
| # Note: strings are encoded as UTF-8. This is only an issue if it contains |
| # unescaped non-ASCII characters, which URIs should not. |
| if not string: |
| # Is it a string-like object? |
| string.split |
| return b'' |
| if isinstance(string, str): |
| string = string.encode('utf-8') |
| res = string.split(b'%') |
| if len(res) == 1: |
| return string |
| string = res[0] |
| for item in res[1:]: |
| try: |
| string += bytes([int(item[:2], 16)]) + item[2:] |
| except ValueError: |
| string += b'%' + item |
| return string |
| |
| def unquote(string, encoding='utf-8', errors='replace'): |
| """Replace %xx escapes by their single-character equivalent. The optional |
| encoding and errors parameters specify how to decode percent-encoded |
| sequences into Unicode characters, as accepted by the bytes.decode() |
| method. |
| By default, percent-encoded sequences are decoded with UTF-8, and invalid |
| sequences are replaced by a placeholder character. |
| |
| unquote('abc%20def') -> 'abc def'. |
| """ |
| if string == '': |
| return string |
| res = string.split('%') |
| if len(res) == 1: |
| return string |
| if encoding is None: |
| encoding = 'utf-8' |
| if errors is None: |
| errors = 'replace' |
| # pct_sequence: contiguous sequence of percent-encoded bytes, decoded |
| pct_sequence = b'' |
| string = res[0] |
| for item in res[1:]: |
| try: |
| if not item: |
| raise ValueError |
| pct_sequence += bytes.fromhex(item[:2]) |
| rest = item[2:] |
| if not rest: |
| # This segment was just a single percent-encoded character. |
| # May be part of a sequence of code units, so delay decoding. |
| # (Stored in pct_sequence). |
| continue |
| except ValueError: |
| rest = '%' + item |
| # Encountered non-percent-encoded characters. Flush the current |
| # pct_sequence. |
| string += pct_sequence.decode(encoding, errors) + rest |
| pct_sequence = b'' |
| if pct_sequence: |
| # Flush the final pct_sequence |
| string += pct_sequence.decode(encoding, errors) |
| return string |
| |
| def parse_qs(qs, keep_blank_values=False, strict_parsing=False, |
| encoding='utf-8', errors='replace'): |
| """Parse a query given as a string argument. |
| |
| Arguments: |
| |
| qs: percent-encoded query string to be parsed |
| |
| keep_blank_values: flag indicating whether blank values in |
| percent-encoded queries should be treated as blank strings. |
| A true value indicates that blanks should be retained as |
| blank strings. The default false value indicates that |
| blank values are to be ignored and treated as if they were |
| not included. |
| |
| strict_parsing: flag indicating what to do with parsing errors. |
| If false (the default), errors are silently ignored. |
| If true, errors raise a ValueError exception. |
| |
| encoding and errors: specify how to decode percent-encoded sequences |
| into Unicode characters, as accepted by the bytes.decode() method. |
| """ |
| dict = {} |
| pairs = parse_qsl(qs, keep_blank_values, strict_parsing, |
| encoding=encoding, errors=errors) |
| for name, value in pairs: |
| if name in dict: |
| dict[name].append(value) |
| else: |
| dict[name] = [value] |
| return dict |
| |
| def parse_qsl(qs, keep_blank_values=False, strict_parsing=False, |
| encoding='utf-8', errors='replace'): |
| """Parse a query given as a string argument. |
| |
| Arguments: |
| |
| qs: percent-encoded query string to be parsed |
| |
| keep_blank_values: flag indicating whether blank values in |
| percent-encoded queries should be treated as blank strings. A |
| true value indicates that blanks should be retained as blank |
| strings. The default false value indicates that blank values |
| are to be ignored and treated as if they were not included. |
| |
| strict_parsing: flag indicating what to do with parsing errors. If |
| false (the default), errors are silently ignored. If true, |
| errors raise a ValueError exception. |
| |
| encoding and errors: specify how to decode percent-encoded sequences |
| into Unicode characters, as accepted by the bytes.decode() method. |
| |
| Returns a list, as G-d intended. |
| """ |
| qs, _coerce_result = _coerce_args(qs) |
| pairs = [s2 for s1 in qs.split('&') for s2 in s1.split(';')] |
| r = [] |
| for name_value in pairs: |
| if not name_value and not strict_parsing: |
| continue |
| nv = name_value.split('=', 1) |
| if len(nv) != 2: |
| if strict_parsing: |
| raise ValueError("bad query field: %r" % (name_value,)) |
| # Handle case of a control-name with no equal sign |
| if keep_blank_values: |
| nv.append('') |
| else: |
| continue |
| if len(nv[1]) or keep_blank_values: |
| name = nv[0].replace('+', ' ') |
| name = unquote(name, encoding=encoding, errors=errors) |
| name = _coerce_result(name) |
| value = nv[1].replace('+', ' ') |
| value = unquote(value, encoding=encoding, errors=errors) |
| value = _coerce_result(value) |
| r.append((name, value)) |
| return r |
| |
| def unquote_plus(string, encoding='utf-8', errors='replace'): |
| """Like unquote(), but also replace plus signs by spaces, as required for |
| unquoting HTML form values. |
| |
| unquote_plus('%7e/abc+def') -> '~/abc def' |
| """ |
| string = string.replace('+', ' ') |
| return unquote(string, encoding, errors) |
| |
| _ALWAYS_SAFE = frozenset(b'ABCDEFGHIJKLMNOPQRSTUVWXYZ' |
| b'abcdefghijklmnopqrstuvwxyz' |
| b'0123456789' |
| b'_.-') |
| _ALWAYS_SAFE_BYTES = bytes(_ALWAYS_SAFE) |
| _safe_quoters = {} |
| |
| class Quoter(collections.defaultdict): |
| """A mapping from bytes (in range(0,256)) to strings. |
| |
| String values are percent-encoded byte values, unless the key < 128, and |
| in the "safe" set (either the specified safe set, or default set). |
| """ |
| # Keeps a cache internally, using defaultdict, for efficiency (lookups |
| # of cached keys don't call Python code at all). |
| def __init__(self, safe): |
| """safe: bytes object.""" |
| self.safe = _ALWAYS_SAFE.union(safe) |
| |
| def __repr__(self): |
| # Without this, will just display as a defaultdict |
| return "<Quoter %r>" % dict(self) |
| |
| def __missing__(self, b): |
| # Handle a cache miss. Store quoted string in cache and return. |
| res = chr(b) if b in self.safe else '%{:02X}'.format(b) |
| self[b] = res |
| return res |
| |
| def quote(string, safe='/', encoding=None, errors=None): |
| """quote('abc def') -> 'abc%20def' |
| |
| Each part of a URL, e.g. the path info, the query, etc., has a |
| different set of reserved characters that must be quoted. |
| |
| RFC 2396 Uniform Resource Identifiers (URI): Generic Syntax lists |
| the following reserved characters. |
| |
| reserved = ";" | "/" | "?" | ":" | "@" | "&" | "=" | "+" | |
| "$" | "," |
| |
| Each of these characters is reserved in some component of a URL, |
| but not necessarily in all of them. |
| |
| By default, the quote function is intended for quoting the path |
| section of a URL. Thus, it will not encode '/'. This character |
| is reserved, but in typical usage the quote function is being |
| called on a path where the existing slash characters are used as |
| reserved characters. |
| |
| string and safe may be either str or bytes objects. encoding must |
| not be specified if string is a str. |
| |
| The optional encoding and errors parameters specify how to deal with |
| non-ASCII characters, as accepted by the str.encode method. |
| By default, encoding='utf-8' (characters are encoded with UTF-8), and |
| errors='strict' (unsupported characters raise a UnicodeEncodeError). |
| """ |
| if isinstance(string, str): |
| if not string: |
| return string |
| if encoding is None: |
| encoding = 'utf-8' |
| if errors is None: |
| errors = 'strict' |
| string = string.encode(encoding, errors) |
| else: |
| if encoding is not None: |
| raise TypeError("quote() doesn't support 'encoding' for bytes") |
| if errors is not None: |
| raise TypeError("quote() doesn't support 'errors' for bytes") |
| return quote_from_bytes(string, safe) |
| |
| def quote_plus(string, safe='', encoding=None, errors=None): |
| """Like quote(), but also replace ' ' with '+', as required for quoting |
| HTML form values. Plus signs in the original string are escaped unless |
| they are included in safe. It also does not have safe default to '/'. |
| """ |
| # Check if ' ' in string, where string may either be a str or bytes. If |
| # there are no spaces, the regular quote will produce the right answer. |
| if ((isinstance(string, str) and ' ' not in string) or |
| (isinstance(string, bytes) and b' ' not in string)): |
| return quote(string, safe, encoding, errors) |
| if isinstance(safe, str): |
| space = ' ' |
| else: |
| space = b' ' |
| string = quote(string, safe + space, encoding, errors) |
| return string.replace(' ', '+') |
| |
| def quote_from_bytes(bs, safe='/'): |
| """Like quote(), but accepts a bytes object rather than a str, and does |
| not perform string-to-bytes encoding. It always returns an ASCII string. |
| quote_from_bytes(b'abc def\xab') -> 'abc%20def%AB' |
| """ |
| if not isinstance(bs, (bytes, bytearray)): |
| raise TypeError("quote_from_bytes() expected bytes") |
| if not bs: |
| return '' |
| if isinstance(safe, str): |
| # Normalize 'safe' by converting to bytes and removing non-ASCII chars |
| safe = safe.encode('ascii', 'ignore') |
| else: |
| safe = bytes([c for c in safe if c < 128]) |
| if not bs.rstrip(_ALWAYS_SAFE_BYTES + safe): |
| return bs.decode() |
| try: |
| quoter = _safe_quoters[safe] |
| except KeyError: |
| _safe_quoters[safe] = quoter = Quoter(safe).__getitem__ |
| return ''.join([quoter(char) for char in bs]) |
| |
| def urlencode(query, doseq=False, safe='', encoding=None, errors=None): |
| """Encode a sequence of two-element tuples or dictionary into a URL query string. |
| |
| If any values in the query arg are sequences and doseq is true, each |
| sequence element is converted to a separate parameter. |
| |
| If the query arg is a sequence of two-element tuples, the order of the |
| parameters in the output will match the order of parameters in the |
| input. |
| |
| The query arg may be either a string or a bytes type. When query arg is a |
| string, the safe, encoding and error parameters are sent the quote_plus for |
| encoding. |
| """ |
| |
| if hasattr(query, "items"): |
| query = query.items() |
| else: |
| # It's a bother at times that strings and string-like objects are |
| # sequences. |
| try: |
| # non-sequence items should not work with len() |
| # non-empty strings will fail this |
| if len(query) and not isinstance(query[0], tuple): |
| raise TypeError |
| # Zero-length sequences of all types will get here and succeed, |
| # but that's a minor nit. Since the original implementation |
| # allowed empty dicts that type of behavior probably should be |
| # preserved for consistency |
| except TypeError: |
| ty, va, tb = sys.exc_info() |
| raise TypeError("not a valid non-string sequence " |
| "or mapping object").with_traceback(tb) |
| |
| l = [] |
| if not doseq: |
| for k, v in query: |
| if isinstance(k, bytes): |
| k = quote_plus(k, safe) |
| else: |
| k = quote_plus(str(k), safe, encoding, errors) |
| |
| if isinstance(v, bytes): |
| v = quote_plus(v, safe) |
| else: |
| v = quote_plus(str(v), safe, encoding, errors) |
| l.append(k + '=' + v) |
| else: |
| for k, v in query: |
| if isinstance(k, bytes): |
| k = quote_plus(k, safe) |
| else: |
| k = quote_plus(str(k), safe, encoding, errors) |
| |
| if isinstance(v, bytes): |
| v = quote_plus(v, safe) |
| l.append(k + '=' + v) |
| elif isinstance(v, str): |
| v = quote_plus(v, safe, encoding, errors) |
| l.append(k + '=' + v) |
| else: |
| try: |
| # Is this a sufficient test for sequence-ness? |
| x = len(v) |
| except TypeError: |
| # not a sequence |
| v = quote_plus(str(v), safe, encoding, errors) |
| l.append(k + '=' + v) |
| else: |
| # loop over the sequence |
| for elt in v: |
| if isinstance(elt, bytes): |
| elt = quote_plus(elt, safe) |
| else: |
| elt = quote_plus(str(elt), safe, encoding, errors) |
| l.append(k + '=' + elt) |
| return '&'.join(l) |
| |
| # Utilities to parse URLs (most of these return None for missing parts): |
| # unwrap('<URL:type://host/path>') --> 'type://host/path' |
| # splittype('type:opaquestring') --> 'type', 'opaquestring' |
| # splithost('//host[:port]/path') --> 'host[:port]', '/path' |
| # splituser('user[:passwd]@host[:port]') --> 'user[:passwd]', 'host[:port]' |
| # splitpasswd('user:passwd') -> 'user', 'passwd' |
| # splitport('host:port') --> 'host', 'port' |
| # splitquery('/path?query') --> '/path', 'query' |
| # splittag('/path#tag') --> '/path', 'tag' |
| # splitattr('/path;attr1=value1;attr2=value2;...') -> |
| # '/path', ['attr1=value1', 'attr2=value2', ...] |
| # splitvalue('attr=value') --> 'attr', 'value' |
| # urllib.parse.unquote('abc%20def') -> 'abc def' |
| # quote('abc def') -> 'abc%20def') |
| |
| def to_bytes(url): |
| """to_bytes(u"URL") --> 'URL'.""" |
| # Most URL schemes require ASCII. If that changes, the conversion |
| # can be relaxed. |
| # XXX get rid of to_bytes() |
| if isinstance(url, str): |
| try: |
| url = url.encode("ASCII").decode() |
| except UnicodeError: |
| raise UnicodeError("URL " + repr(url) + |
| " contains non-ASCII characters") |
| return url |
| |
| def unwrap(url): |
| """unwrap('<URL:type://host/path>') --> 'type://host/path'.""" |
| url = str(url).strip() |
| if url[:1] == '<' and url[-1:] == '>': |
| url = url[1:-1].strip() |
| if url[:4] == 'URL:': url = url[4:].strip() |
| return url |
| |
| _typeprog = None |
| def splittype(url): |
| """splittype('type:opaquestring') --> 'type', 'opaquestring'.""" |
| global _typeprog |
| if _typeprog is None: |
| import re |
| _typeprog = re.compile('^([^/:]+):') |
| |
| match = _typeprog.match(url) |
| if match: |
| scheme = match.group(1) |
| return scheme.lower(), url[len(scheme) + 1:] |
| return None, url |
| |
| _hostprog = None |
| def splithost(url): |
| """splithost('//host[:port]/path') --> 'host[:port]', '/path'.""" |
| global _hostprog |
| if _hostprog is None: |
| import re |
| _hostprog = re.compile('^//([^/?]*)(.*)$') |
| |
| match = _hostprog.match(url) |
| if match: |
| host_port = match.group(1) |
| path = match.group(2) |
| if path and not path.startswith('/'): |
| path = '/' + path |
| return host_port, path |
| return None, url |
| |
| _userprog = None |
| def splituser(host): |
| """splituser('user[:passwd]@host[:port]') --> 'user[:passwd]', 'host[:port]'.""" |
| global _userprog |
| if _userprog is None: |
| import re |
| _userprog = re.compile('^(.*)@(.*)$') |
| |
| match = _userprog.match(host) |
| if match: return match.group(1, 2) |
| return None, host |
| |
| _passwdprog = None |
| def splitpasswd(user): |
| """splitpasswd('user:passwd') -> 'user', 'passwd'.""" |
| global _passwdprog |
| if _passwdprog is None: |
| import re |
| _passwdprog = re.compile('^([^:]*):(.*)$',re.S) |
| |
| match = _passwdprog.match(user) |
| if match: return match.group(1, 2) |
| return user, None |
| |
| # splittag('/path#tag') --> '/path', 'tag' |
| _portprog = None |
| def splitport(host): |
| """splitport('host:port') --> 'host', 'port'.""" |
| global _portprog |
| if _portprog is None: |
| import re |
| _portprog = re.compile('^(.*):([0-9]+)$') |
| |
| match = _portprog.match(host) |
| if match: return match.group(1, 2) |
| return host, None |
| |
| _nportprog = None |
| def splitnport(host, defport=-1): |
| """Split host and port, returning numeric port. |
| Return given default port if no ':' found; defaults to -1. |
| Return numerical port if a valid number are found after ':'. |
| Return None if ':' but not a valid number.""" |
| global _nportprog |
| if _nportprog is None: |
| import re |
| _nportprog = re.compile('^(.*):(.*)$') |
| |
| match = _nportprog.match(host) |
| if match: |
| host, port = match.group(1, 2) |
| try: |
| if not port: raise ValueError("no digits") |
| nport = int(port) |
| except ValueError: |
| nport = None |
| return host, nport |
| return host, defport |
| |
| _queryprog = None |
| def splitquery(url): |
| """splitquery('/path?query') --> '/path', 'query'.""" |
| global _queryprog |
| if _queryprog is None: |
| import re |
| _queryprog = re.compile('^(.*)\?([^?]*)$') |
| |
| match = _queryprog.match(url) |
| if match: return match.group(1, 2) |
| return url, None |
| |
| _tagprog = None |
| def splittag(url): |
| """splittag('/path#tag') --> '/path', 'tag'.""" |
| global _tagprog |
| if _tagprog is None: |
| import re |
| _tagprog = re.compile('^(.*)#([^#]*)$') |
| |
| match = _tagprog.match(url) |
| if match: return match.group(1, 2) |
| return url, None |
| |
| def splitattr(url): |
| """splitattr('/path;attr1=value1;attr2=value2;...') -> |
| '/path', ['attr1=value1', 'attr2=value2', ...].""" |
| words = url.split(';') |
| return words[0], words[1:] |
| |
| _valueprog = None |
| def splitvalue(attr): |
| """splitvalue('attr=value') --> 'attr', 'value'.""" |
| global _valueprog |
| if _valueprog is None: |
| import re |
| _valueprog = re.compile('^([^=]*)=(.*)$') |
| |
| match = _valueprog.match(attr) |
| if match: return match.group(1, 2) |
| return attr, None |