| # As a test suite for the os module, this is woefully inadequate, but this |
| # does add tests for a few functions which have been determined to be more |
| # portable than they had been thought to be. |
| |
| import asynchat |
| import asyncore |
| import codecs |
| import contextlib |
| import decimal |
| import errno |
| import fractions |
| import itertools |
| import locale |
| import mmap |
| import os |
| import pickle |
| import platform |
| import re |
| import shutil |
| import signal |
| import socket |
| import stat |
| import subprocess |
| import sys |
| import sysconfig |
| import time |
| import unittest |
| import uuid |
| import warnings |
| from test import support |
| try: |
| import threading |
| except ImportError: |
| threading = None |
| try: |
| import resource |
| except ImportError: |
| resource = None |
| try: |
| import fcntl |
| except ImportError: |
| fcntl = None |
| |
| from test.script_helper import assert_python_ok |
| |
| # Detect whether we're on a Linux system that uses the (now outdated |
| # and unmaintained) linuxthreads threading library. There's an issue |
| # when combining linuxthreads with a failed execv call: see |
| # http://bugs.python.org/issue4970. |
| if hasattr(sys, 'thread_info') and sys.thread_info.version: |
| USING_LINUXTHREADS = sys.thread_info.version.startswith("linuxthreads") |
| else: |
| USING_LINUXTHREADS = False |
| |
| # Issue #14110: Some tests fail on FreeBSD if the user is in the wheel group. |
| HAVE_WHEEL_GROUP = sys.platform.startswith('freebsd') and os.getgid() == 0 |
| |
| # Tests creating TESTFN |
| class FileTests(unittest.TestCase): |
| def setUp(self): |
| if os.path.lexists(support.TESTFN): |
| os.unlink(support.TESTFN) |
| tearDown = setUp |
| |
| def test_access(self): |
| f = os.open(support.TESTFN, os.O_CREAT|os.O_RDWR) |
| os.close(f) |
| self.assertTrue(os.access(support.TESTFN, os.W_OK)) |
| |
| def test_closerange(self): |
| first = os.open(support.TESTFN, os.O_CREAT|os.O_RDWR) |
| # We must allocate two consecutive file descriptors, otherwise |
| # it will mess up other file descriptors (perhaps even the three |
| # standard ones). |
| second = os.dup(first) |
| try: |
| retries = 0 |
| while second != first + 1: |
| os.close(first) |
| retries += 1 |
| if retries > 10: |
| # XXX test skipped |
| self.skipTest("couldn't allocate two consecutive fds") |
| first, second = second, os.dup(second) |
| finally: |
| os.close(second) |
| # close a fd that is open, and one that isn't |
| os.closerange(first, first + 2) |
| self.assertRaises(OSError, os.write, first, b"a") |
| |
| @support.cpython_only |
| def test_rename(self): |
| path = support.TESTFN |
| old = sys.getrefcount(path) |
| self.assertRaises(TypeError, os.rename, path, 0) |
| new = sys.getrefcount(path) |
| self.assertEqual(old, new) |
| |
| def test_read(self): |
| with open(support.TESTFN, "w+b") as fobj: |
| fobj.write(b"spam") |
| fobj.flush() |
| fd = fobj.fileno() |
| os.lseek(fd, 0, 0) |
| s = os.read(fd, 4) |
| self.assertEqual(type(s), bytes) |
| self.assertEqual(s, b"spam") |
| |
| def test_write(self): |
| # os.write() accepts bytes- and buffer-like objects but not strings |
| fd = os.open(support.TESTFN, os.O_CREAT | os.O_WRONLY) |
| self.assertRaises(TypeError, os.write, fd, "beans") |
| os.write(fd, b"bacon\n") |
| os.write(fd, bytearray(b"eggs\n")) |
| os.write(fd, memoryview(b"spam\n")) |
| os.close(fd) |
| with open(support.TESTFN, "rb") as fobj: |
| self.assertEqual(fobj.read().splitlines(), |
| [b"bacon", b"eggs", b"spam"]) |
| |
| def write_windows_console(self, *args): |
| retcode = subprocess.call(args, |
| # use a new console to not flood the test output |
| creationflags=subprocess.CREATE_NEW_CONSOLE, |
| # use a shell to hide the console window (SW_HIDE) |
| shell=True) |
| self.assertEqual(retcode, 0) |
| |
| @unittest.skipUnless(sys.platform == 'win32', |
| 'test specific to the Windows console') |
| def test_write_windows_console(self): |
| # Issue #11395: the Windows console returns an error (12: not enough |
| # space error) on writing into stdout if stdout mode is binary and the |
| # length is greater than 66,000 bytes (or less, depending on heap |
| # usage). |
| code = "print('x' * 100000)" |
| self.write_windows_console(sys.executable, "-c", code) |
| self.write_windows_console(sys.executable, "-u", "-c", code) |
| |
| def fdopen_helper(self, *args): |
| fd = os.open(support.TESTFN, os.O_RDONLY) |
| f = os.fdopen(fd, *args) |
| f.close() |
| |
| def test_fdopen(self): |
| fd = os.open(support.TESTFN, os.O_CREAT|os.O_RDWR) |
| os.close(fd) |
| |
| self.fdopen_helper() |
| self.fdopen_helper('r') |
| self.fdopen_helper('r', 100) |
| |
| def test_replace(self): |
| TESTFN2 = support.TESTFN + ".2" |
| with open(support.TESTFN, 'w') as f: |
| f.write("1") |
| with open(TESTFN2, 'w') as f: |
| f.write("2") |
| self.addCleanup(os.unlink, TESTFN2) |
| os.replace(support.TESTFN, TESTFN2) |
| self.assertRaises(FileNotFoundError, os.stat, support.TESTFN) |
| with open(TESTFN2, 'r') as f: |
| self.assertEqual(f.read(), "1") |
| |
| def test_open_keywords(self): |
| f = os.open(path=__file__, flags=os.O_RDONLY, mode=0o777, |
| dir_fd=None) |
| os.close(f) |
| |
| def test_symlink_keywords(self): |
| symlink = support.get_attribute(os, "symlink") |
| try: |
| symlink(src='target', dst=support.TESTFN, |
| target_is_directory=False, dir_fd=None) |
| except (NotImplementedError, OSError): |
| pass # No OS support or unprivileged user |
| |
| |
| # Test attributes on return values from os.*stat* family. |
| class StatAttributeTests(unittest.TestCase): |
| def setUp(self): |
| os.mkdir(support.TESTFN) |
| self.fname = os.path.join(support.TESTFN, "f1") |
| f = open(self.fname, 'wb') |
| f.write(b"ABC") |
| f.close() |
| |
| def tearDown(self): |
| os.unlink(self.fname) |
| os.rmdir(support.TESTFN) |
| |
| @unittest.skipUnless(hasattr(os, 'stat'), 'test needs os.stat()') |
| def check_stat_attributes(self, fname): |
| result = os.stat(fname) |
| |
| # Make sure direct access works |
| self.assertEqual(result[stat.ST_SIZE], 3) |
| self.assertEqual(result.st_size, 3) |
| |
| # Make sure all the attributes are there |
| members = dir(result) |
| for name in dir(stat): |
| if name[:3] == 'ST_': |
| attr = name.lower() |
| if name.endswith("TIME"): |
| def trunc(x): return int(x) |
| else: |
| def trunc(x): return x |
| self.assertEqual(trunc(getattr(result, attr)), |
| result[getattr(stat, name)]) |
| self.assertIn(attr, members) |
| |
| # Make sure that the st_?time and st_?time_ns fields roughly agree |
| # (they should always agree up to around tens-of-microseconds) |
| for name in 'st_atime st_mtime st_ctime'.split(): |
| floaty = int(getattr(result, name) * 100000) |
| nanosecondy = getattr(result, name + "_ns") // 10000 |
| self.assertAlmostEqual(floaty, nanosecondy, delta=2) |
| |
| try: |
| result[200] |
| self.fail("No exception raised") |
| except IndexError: |
| pass |
| |
| # Make sure that assignment fails |
| try: |
| result.st_mode = 1 |
| self.fail("No exception raised") |
| except AttributeError: |
| pass |
| |
| try: |
| result.st_rdev = 1 |
| self.fail("No exception raised") |
| except (AttributeError, TypeError): |
| pass |
| |
| try: |
| result.parrot = 1 |
| self.fail("No exception raised") |
| except AttributeError: |
| pass |
| |
| # Use the stat_result constructor with a too-short tuple. |
| try: |
| result2 = os.stat_result((10,)) |
| self.fail("No exception raised") |
| except TypeError: |
| pass |
| |
| # Use the constructor with a too-long tuple. |
| try: |
| result2 = os.stat_result((0,1,2,3,4,5,6,7,8,9,10,11,12,13,14)) |
| except TypeError: |
| pass |
| |
| def test_stat_attributes(self): |
| self.check_stat_attributes(self.fname) |
| |
| def test_stat_attributes_bytes(self): |
| try: |
| fname = self.fname.encode(sys.getfilesystemencoding()) |
| except UnicodeEncodeError: |
| self.skipTest("cannot encode %a for the filesystem" % self.fname) |
| with warnings.catch_warnings(): |
| warnings.simplefilter("ignore", DeprecationWarning) |
| self.check_stat_attributes(fname) |
| |
| def test_stat_result_pickle(self): |
| result = os.stat(self.fname) |
| for proto in range(pickle.HIGHEST_PROTOCOL + 1): |
| p = pickle.dumps(result, proto) |
| self.assertIn(b'stat_result', p) |
| if proto < 4: |
| self.assertIn(b'cos\nstat_result\n', p) |
| unpickled = pickle.loads(p) |
| self.assertEqual(result, unpickled) |
| |
| @unittest.skipUnless(hasattr(os, 'statvfs'), 'test needs os.statvfs()') |
| def test_statvfs_attributes(self): |
| try: |
| result = os.statvfs(self.fname) |
| except OSError as e: |
| # On AtheOS, glibc always returns ENOSYS |
| if e.errno == errno.ENOSYS: |
| self.skipTest('os.statvfs() failed with ENOSYS') |
| |
| # Make sure direct access works |
| self.assertEqual(result.f_bfree, result[3]) |
| |
| # Make sure all the attributes are there. |
| members = ('bsize', 'frsize', 'blocks', 'bfree', 'bavail', 'files', |
| 'ffree', 'favail', 'flag', 'namemax') |
| for value, member in enumerate(members): |
| self.assertEqual(getattr(result, 'f_' + member), result[value]) |
| |
| # Make sure that assignment really fails |
| try: |
| result.f_bfree = 1 |
| self.fail("No exception raised") |
| except AttributeError: |
| pass |
| |
| try: |
| result.parrot = 1 |
| self.fail("No exception raised") |
| except AttributeError: |
| pass |
| |
| # Use the constructor with a too-short tuple. |
| try: |
| result2 = os.statvfs_result((10,)) |
| self.fail("No exception raised") |
| except TypeError: |
| pass |
| |
| # Use the constructor with a too-long tuple. |
| try: |
| result2 = os.statvfs_result((0,1,2,3,4,5,6,7,8,9,10,11,12,13,14)) |
| except TypeError: |
| pass |
| |
| @unittest.skipUnless(hasattr(os, 'statvfs'), |
| "need os.statvfs()") |
| def test_statvfs_result_pickle(self): |
| try: |
| result = os.statvfs(self.fname) |
| except OSError as e: |
| # On AtheOS, glibc always returns ENOSYS |
| if e.errno == errno.ENOSYS: |
| self.skipTest('os.statvfs() failed with ENOSYS') |
| |
| for proto in range(pickle.HIGHEST_PROTOCOL + 1): |
| p = pickle.dumps(result, proto) |
| self.assertIn(b'statvfs_result', p) |
| if proto < 4: |
| self.assertIn(b'cos\nstatvfs_result\n', p) |
| unpickled = pickle.loads(p) |
| self.assertEqual(result, unpickled) |
| |
| @unittest.skipUnless(sys.platform == "win32", "Win32 specific tests") |
| def test_1686475(self): |
| # Verify that an open file can be stat'ed |
| try: |
| os.stat(r"c:\pagefile.sys") |
| except FileNotFoundError: |
| self.skipTest(r'c:\pagefile.sys does not exist') |
| except OSError as e: |
| self.fail("Could not stat pagefile.sys") |
| |
| @unittest.skipUnless(sys.platform == "win32", "Win32 specific tests") |
| @unittest.skipUnless(hasattr(os, "pipe"), "requires os.pipe()") |
| def test_15261(self): |
| # Verify that stat'ing a closed fd does not cause crash |
| r, w = os.pipe() |
| try: |
| os.stat(r) # should not raise error |
| finally: |
| os.close(r) |
| os.close(w) |
| with self.assertRaises(OSError) as ctx: |
| os.stat(r) |
| self.assertEqual(ctx.exception.errno, errno.EBADF) |
| |
| |
| class UtimeTests(unittest.TestCase): |
| def setUp(self): |
| self.dirname = support.TESTFN |
| self.fname = os.path.join(self.dirname, "f1") |
| |
| self.addCleanup(support.rmtree, self.dirname) |
| os.mkdir(self.dirname) |
| with open(self.fname, 'wb') as fp: |
| fp.write(b"ABC") |
| |
| def restore_float_times(state): |
| with warnings.catch_warnings(): |
| warnings.simplefilter("ignore", DeprecationWarning) |
| |
| os.stat_float_times(state) |
| |
| # ensure that st_atime and st_mtime are float |
| with warnings.catch_warnings(): |
| warnings.simplefilter("ignore", DeprecationWarning) |
| |
| old_float_times = os.stat_float_times(-1) |
| self.addCleanup(restore_float_times, old_float_times) |
| |
| os.stat_float_times(True) |
| |
| def support_subsecond(self, filename): |
| # Heuristic to check if the filesystem supports timestamp with |
| # subsecond resolution: check if float and int timestamps are different |
| st = os.stat(filename) |
| return ((st.st_atime != st[7]) |
| or (st.st_mtime != st[8]) |
| or (st.st_ctime != st[9])) |
| |
| def _test_utime(self, set_time, filename=None): |
| if not filename: |
| filename = self.fname |
| |
| support_subsecond = self.support_subsecond(filename) |
| if support_subsecond: |
| # Timestamp with a resolution of 1 microsecond (10^-6). |
| # |
| # The resolution of the C internal function used by os.utime() |
| # depends on the platform: 1 sec, 1 us, 1 ns. Writing a portable |
| # test with a resolution of 1 ns requires more work: |
| # see the issue #15745. |
| atime_ns = 1002003000 # 1.002003 seconds |
| mtime_ns = 4005006000 # 4.005006 seconds |
| else: |
| # use a resolution of 1 second |
| atime_ns = 5 * 10**9 |
| mtime_ns = 8 * 10**9 |
| |
| set_time(filename, (atime_ns, mtime_ns)) |
| st = os.stat(filename) |
| |
| if support_subsecond: |
| self.assertAlmostEqual(st.st_atime, atime_ns * 1e-9, delta=1e-6) |
| self.assertAlmostEqual(st.st_mtime, mtime_ns * 1e-9, delta=1e-6) |
| else: |
| self.assertEqual(st.st_atime, atime_ns * 1e-9) |
| self.assertEqual(st.st_mtime, mtime_ns * 1e-9) |
| self.assertEqual(st.st_atime_ns, atime_ns) |
| self.assertEqual(st.st_mtime_ns, mtime_ns) |
| |
| def test_utime(self): |
| def set_time(filename, ns): |
| # test the ns keyword parameter |
| os.utime(filename, ns=ns) |
| self._test_utime(set_time) |
| |
| @staticmethod |
| def ns_to_sec(ns): |
| # Convert a number of nanosecond (int) to a number of seconds (float). |
| # Round towards infinity by adding 0.5 nanosecond to avoid rounding |
| # issue, os.utime() rounds towards minus infinity. |
| return (ns * 1e-9) + 0.5e-9 |
| |
| def test_utime_by_indexed(self): |
| # pass times as floating point seconds as the second indexed parameter |
| def set_time(filename, ns): |
| atime_ns, mtime_ns = ns |
| atime = self.ns_to_sec(atime_ns) |
| mtime = self.ns_to_sec(mtime_ns) |
| # test utimensat(timespec), utimes(timeval), utime(utimbuf) |
| # or utime(time_t) |
| os.utime(filename, (atime, mtime)) |
| self._test_utime(set_time) |
| |
| def test_utime_by_times(self): |
| def set_time(filename, ns): |
| atime_ns, mtime_ns = ns |
| atime = self.ns_to_sec(atime_ns) |
| mtime = self.ns_to_sec(mtime_ns) |
| # test the times keyword parameter |
| os.utime(filename, times=(atime, mtime)) |
| self._test_utime(set_time) |
| |
| @unittest.skipUnless(os.utime in os.supports_follow_symlinks, |
| "follow_symlinks support for utime required " |
| "for this test.") |
| def test_utime_nofollow_symlinks(self): |
| def set_time(filename, ns): |
| # use follow_symlinks=False to test utimensat(timespec) |
| # or lutimes(timeval) |
| os.utime(filename, ns=ns, follow_symlinks=False) |
| self._test_utime(set_time) |
| |
| @unittest.skipUnless(os.utime in os.supports_fd, |
| "fd support for utime required for this test.") |
| def test_utime_fd(self): |
| def set_time(filename, ns): |
| with open(filename, 'wb') as fp: |
| # use a file descriptor to test futimens(timespec) |
| # or futimes(timeval) |
| os.utime(fp.fileno(), ns=ns) |
| self._test_utime(set_time) |
| |
| @unittest.skipUnless(os.utime in os.supports_dir_fd, |
| "dir_fd support for utime required for this test.") |
| def test_utime_dir_fd(self): |
| def set_time(filename, ns): |
| dirname, name = os.path.split(filename) |
| dirfd = os.open(dirname, os.O_RDONLY) |
| try: |
| # pass dir_fd to test utimensat(timespec) or futimesat(timeval) |
| os.utime(name, dir_fd=dirfd, ns=ns) |
| finally: |
| os.close(dirfd) |
| self._test_utime(set_time) |
| |
| def test_utime_directory(self): |
| def set_time(filename, ns): |
| # test calling os.utime() on a directory |
| os.utime(filename, ns=ns) |
| self._test_utime(set_time, filename=self.dirname) |
| |
| def _test_utime_current(self, set_time): |
| # Get the system clock |
| current = time.time() |
| |
| # Call os.utime() to set the timestamp to the current system clock |
| set_time(self.fname) |
| |
| if not self.support_subsecond(self.fname): |
| delta = 1.0 |
| else: |
| # On Windows, the usual resolution of time.time() is 15.6 ms |
| delta = 0.020 |
| st = os.stat(self.fname) |
| msg = ("st_time=%r, current=%r, dt=%r" |
| % (st.st_mtime, current, st.st_mtime - current)) |
| self.assertAlmostEqual(st.st_mtime, current, |
| delta=delta, msg=msg) |
| |
| def test_utime_current(self): |
| def set_time(filename): |
| # Set to the current time in the new way |
| os.utime(self.fname) |
| self._test_utime_current(set_time) |
| |
| def test_utime_current_old(self): |
| def set_time(filename): |
| # Set to the current time in the old explicit way. |
| os.utime(self.fname, None) |
| self._test_utime_current(set_time) |
| |
| def get_file_system(self, path): |
| if sys.platform == 'win32': |
| root = os.path.splitdrive(os.path.abspath(path))[0] + '\\' |
| import ctypes |
| kernel32 = ctypes.windll.kernel32 |
| buf = ctypes.create_unicode_buffer("", 100) |
| ok = kernel32.GetVolumeInformationW(root, None, 0, |
| None, None, None, |
| buf, len(buf)) |
| if ok: |
| return buf.value |
| # return None if the filesystem is unknown |
| |
| def test_large_time(self): |
| # Many filesystems are limited to the year 2038. At least, the test |
| # pass with NTFS filesystem. |
| if self.get_file_system(self.dirname) != "NTFS": |
| self.skipTest("requires NTFS") |
| |
| large = 5000000000 # some day in 2128 |
| os.utime(self.fname, (large, large)) |
| self.assertEqual(os.stat(self.fname).st_mtime, large) |
| |
| def test_utime_invalid_arguments(self): |
| # seconds and nanoseconds parameters are mutually exclusive |
| with self.assertRaises(ValueError): |
| os.utime(self.fname, (5, 5), ns=(5, 5)) |
| |
| |
| from test import mapping_tests |
| |
| class EnvironTests(mapping_tests.BasicTestMappingProtocol): |
| """check that os.environ object conform to mapping protocol""" |
| type2test = None |
| |
| def setUp(self): |
| self.__save = dict(os.environ) |
| if os.supports_bytes_environ: |
| self.__saveb = dict(os.environb) |
| for key, value in self._reference().items(): |
| os.environ[key] = value |
| |
| def tearDown(self): |
| os.environ.clear() |
| os.environ.update(self.__save) |
| if os.supports_bytes_environ: |
| os.environb.clear() |
| os.environb.update(self.__saveb) |
| |
| def _reference(self): |
| return {"KEY1":"VALUE1", "KEY2":"VALUE2", "KEY3":"VALUE3"} |
| |
| def _empty_mapping(self): |
| os.environ.clear() |
| return os.environ |
| |
| # Bug 1110478 |
| @unittest.skipUnless(os.path.exists('/bin/sh'), 'requires /bin/sh') |
| def test_update2(self): |
| os.environ.clear() |
| os.environ.update(HELLO="World") |
| with os.popen("/bin/sh -c 'echo $HELLO'") as popen: |
| value = popen.read().strip() |
| self.assertEqual(value, "World") |
| |
| @unittest.skipUnless(os.path.exists('/bin/sh'), 'requires /bin/sh') |
| def test_os_popen_iter(self): |
| with os.popen( |
| "/bin/sh -c 'echo \"line1\nline2\nline3\"'") as popen: |
| it = iter(popen) |
| self.assertEqual(next(it), "line1\n") |
| self.assertEqual(next(it), "line2\n") |
| self.assertEqual(next(it), "line3\n") |
| self.assertRaises(StopIteration, next, it) |
| |
| # Verify environ keys and values from the OS are of the |
| # correct str type. |
| def test_keyvalue_types(self): |
| for key, val in os.environ.items(): |
| self.assertEqual(type(key), str) |
| self.assertEqual(type(val), str) |
| |
| def test_items(self): |
| for key, value in self._reference().items(): |
| self.assertEqual(os.environ.get(key), value) |
| |
| # Issue 7310 |
| def test___repr__(self): |
| """Check that the repr() of os.environ looks like environ({...}).""" |
| env = os.environ |
| self.assertEqual(repr(env), 'environ({{{}}})'.format(', '.join( |
| '{!r}: {!r}'.format(key, value) |
| for key, value in env.items()))) |
| |
| def test_get_exec_path(self): |
| defpath_list = os.defpath.split(os.pathsep) |
| test_path = ['/monty', '/python', '', '/flying/circus'] |
| test_env = {'PATH': os.pathsep.join(test_path)} |
| |
| saved_environ = os.environ |
| try: |
| os.environ = dict(test_env) |
| # Test that defaulting to os.environ works. |
| self.assertSequenceEqual(test_path, os.get_exec_path()) |
| self.assertSequenceEqual(test_path, os.get_exec_path(env=None)) |
| finally: |
| os.environ = saved_environ |
| |
| # No PATH environment variable |
| self.assertSequenceEqual(defpath_list, os.get_exec_path({})) |
| # Empty PATH environment variable |
| self.assertSequenceEqual(('',), os.get_exec_path({'PATH':''})) |
| # Supplied PATH environment variable |
| self.assertSequenceEqual(test_path, os.get_exec_path(test_env)) |
| |
| if os.supports_bytes_environ: |
| # env cannot contain 'PATH' and b'PATH' keys |
| try: |
| # ignore BytesWarning warning |
| with warnings.catch_warnings(record=True): |
| mixed_env = {'PATH': '1', b'PATH': b'2'} |
| except BytesWarning: |
| # mixed_env cannot be created with python -bb |
| pass |
| else: |
| self.assertRaises(ValueError, os.get_exec_path, mixed_env) |
| |
| # bytes key and/or value |
| self.assertSequenceEqual(os.get_exec_path({b'PATH': b'abc'}), |
| ['abc']) |
| self.assertSequenceEqual(os.get_exec_path({b'PATH': 'abc'}), |
| ['abc']) |
| self.assertSequenceEqual(os.get_exec_path({'PATH': b'abc'}), |
| ['abc']) |
| |
| @unittest.skipUnless(os.supports_bytes_environ, |
| "os.environb required for this test.") |
| def test_environb(self): |
| # os.environ -> os.environb |
| value = 'euro\u20ac' |
| try: |
| value_bytes = value.encode(sys.getfilesystemencoding(), |
| 'surrogateescape') |
| except UnicodeEncodeError: |
| msg = "U+20AC character is not encodable to %s" % ( |
| sys.getfilesystemencoding(),) |
| self.skipTest(msg) |
| os.environ['unicode'] = value |
| self.assertEqual(os.environ['unicode'], value) |
| self.assertEqual(os.environb[b'unicode'], value_bytes) |
| |
| # os.environb -> os.environ |
| value = b'\xff' |
| os.environb[b'bytes'] = value |
| self.assertEqual(os.environb[b'bytes'], value) |
| value_str = value.decode(sys.getfilesystemencoding(), 'surrogateescape') |
| self.assertEqual(os.environ['bytes'], value_str) |
| |
| # On FreeBSD < 7 and OS X < 10.6, unsetenv() doesn't return a value (issue |
| # #13415). |
| @support.requires_freebsd_version(7) |
| @support.requires_mac_ver(10, 6) |
| def test_unset_error(self): |
| if sys.platform == "win32": |
| # an environment variable is limited to 32,767 characters |
| key = 'x' * 50000 |
| self.assertRaises(ValueError, os.environ.__delitem__, key) |
| else: |
| # "=" is not allowed in a variable name |
| key = 'key=' |
| self.assertRaises(OSError, os.environ.__delitem__, key) |
| |
| def test_key_type(self): |
| missing = 'missingkey' |
| self.assertNotIn(missing, os.environ) |
| |
| with self.assertRaises(KeyError) as cm: |
| os.environ[missing] |
| self.assertIs(cm.exception.args[0], missing) |
| self.assertTrue(cm.exception.__suppress_context__) |
| |
| with self.assertRaises(KeyError) as cm: |
| del os.environ[missing] |
| self.assertIs(cm.exception.args[0], missing) |
| self.assertTrue(cm.exception.__suppress_context__) |
| |
| |
| class WalkTests(unittest.TestCase): |
| """Tests for os.walk().""" |
| |
| # Wrapper to hide minor differences between os.walk and os.fwalk |
| # to tests both functions with the same code base |
| def walk(self, directory, topdown=True, follow_symlinks=False): |
| walk_it = os.walk(directory, |
| topdown=topdown, |
| followlinks=follow_symlinks) |
| for root, dirs, files in walk_it: |
| yield (root, dirs, files) |
| |
| def setUp(self): |
| join = os.path.join |
| |
| # Build: |
| # TESTFN/ |
| # TEST1/ a file kid and two directory kids |
| # tmp1 |
| # SUB1/ a file kid and a directory kid |
| # tmp2 |
| # SUB11/ no kids |
| # SUB2/ a file kid and a dirsymlink kid |
| # tmp3 |
| # link/ a symlink to TESTFN.2 |
| # broken_link |
| # TEST2/ |
| # tmp4 a lone file |
| self.walk_path = join(support.TESTFN, "TEST1") |
| self.sub1_path = join(self.walk_path, "SUB1") |
| self.sub11_path = join(self.sub1_path, "SUB11") |
| sub2_path = join(self.walk_path, "SUB2") |
| tmp1_path = join(self.walk_path, "tmp1") |
| tmp2_path = join(self.sub1_path, "tmp2") |
| tmp3_path = join(sub2_path, "tmp3") |
| self.link_path = join(sub2_path, "link") |
| t2_path = join(support.TESTFN, "TEST2") |
| tmp4_path = join(support.TESTFN, "TEST2", "tmp4") |
| broken_link_path = join(sub2_path, "broken_link") |
| |
| # Create stuff. |
| os.makedirs(self.sub11_path) |
| os.makedirs(sub2_path) |
| os.makedirs(t2_path) |
| |
| for path in tmp1_path, tmp2_path, tmp3_path, tmp4_path: |
| f = open(path, "w") |
| f.write("I'm " + path + " and proud of it. Blame test_os.\n") |
| f.close() |
| |
| if support.can_symlink(): |
| os.symlink(os.path.abspath(t2_path), self.link_path) |
| os.symlink('broken', broken_link_path, True) |
| self.sub2_tree = (sub2_path, ["link"], ["broken_link", "tmp3"]) |
| else: |
| self.sub2_tree = (sub2_path, [], ["tmp3"]) |
| |
| def test_walk_topdown(self): |
| # Walk top-down. |
| all = list(os.walk(self.walk_path)) |
| |
| self.assertEqual(len(all), 4) |
| # We can't know which order SUB1 and SUB2 will appear in. |
| # Not flipped: TESTFN, SUB1, SUB11, SUB2 |
| # flipped: TESTFN, SUB2, SUB1, SUB11 |
| flipped = all[0][1][0] != "SUB1" |
| all[0][1].sort() |
| all[3 - 2 * flipped][-1].sort() |
| self.assertEqual(all[0], (self.walk_path, ["SUB1", "SUB2"], ["tmp1"])) |
| self.assertEqual(all[1 + flipped], (self.sub1_path, ["SUB11"], ["tmp2"])) |
| self.assertEqual(all[2 + flipped], (self.sub11_path, [], [])) |
| self.assertEqual(all[3 - 2 * flipped], self.sub2_tree) |
| |
| def test_walk_prune(self): |
| # Prune the search. |
| all = [] |
| for root, dirs, files in self.walk(self.walk_path): |
| all.append((root, dirs, files)) |
| # Don't descend into SUB1. |
| if 'SUB1' in dirs: |
| # Note that this also mutates the dirs we appended to all! |
| dirs.remove('SUB1') |
| |
| self.assertEqual(len(all), 2) |
| self.assertEqual(all[0], |
| (self.walk_path, ["SUB2"], ["tmp1"])) |
| |
| all[1][-1].sort() |
| self.assertEqual(all[1], self.sub2_tree) |
| |
| def test_walk_bottom_up(self): |
| # Walk bottom-up. |
| all = list(self.walk(self.walk_path, topdown=False)) |
| |
| self.assertEqual(len(all), 4) |
| # We can't know which order SUB1 and SUB2 will appear in. |
| # Not flipped: SUB11, SUB1, SUB2, TESTFN |
| # flipped: SUB2, SUB11, SUB1, TESTFN |
| flipped = all[3][1][0] != "SUB1" |
| all[3][1].sort() |
| all[2 - 2 * flipped][-1].sort() |
| self.assertEqual(all[3], |
| (self.walk_path, ["SUB1", "SUB2"], ["tmp1"])) |
| self.assertEqual(all[flipped], |
| (self.sub11_path, [], [])) |
| self.assertEqual(all[flipped + 1], |
| (self.sub1_path, ["SUB11"], ["tmp2"])) |
| self.assertEqual(all[2 - 2 * flipped], |
| self.sub2_tree) |
| |
| def test_walk_symlink(self): |
| if not support.can_symlink(): |
| self.skipTest("need symlink support") |
| |
| # Walk, following symlinks. |
| walk_it = self.walk(self.walk_path, follow_symlinks=True) |
| for root, dirs, files in walk_it: |
| if root == self.link_path: |
| self.assertEqual(dirs, []) |
| self.assertEqual(files, ["tmp4"]) |
| break |
| else: |
| self.fail("Didn't follow symlink with followlinks=True") |
| |
| def tearDown(self): |
| # Tear everything down. This is a decent use for bottom-up on |
| # Windows, which doesn't have a recursive delete command. The |
| # (not so) subtlety is that rmdir will fail unless the dir's |
| # kids are removed first, so bottom up is essential. |
| for root, dirs, files in os.walk(support.TESTFN, topdown=False): |
| for name in files: |
| os.remove(os.path.join(root, name)) |
| for name in dirs: |
| dirname = os.path.join(root, name) |
| if not os.path.islink(dirname): |
| os.rmdir(dirname) |
| else: |
| os.remove(dirname) |
| os.rmdir(support.TESTFN) |
| |
| |
| @unittest.skipUnless(hasattr(os, 'fwalk'), "Test needs os.fwalk()") |
| class FwalkTests(WalkTests): |
| """Tests for os.fwalk().""" |
| |
| def walk(self, directory, topdown=True, follow_symlinks=False): |
| walk_it = os.fwalk(directory, |
| topdown=topdown, |
| follow_symlinks=follow_symlinks) |
| for root, dirs, files, root_fd in walk_it: |
| yield (root, dirs, files) |
| |
| |
| def _compare_to_walk(self, walk_kwargs, fwalk_kwargs): |
| """ |
| compare with walk() results. |
| """ |
| walk_kwargs = walk_kwargs.copy() |
| fwalk_kwargs = fwalk_kwargs.copy() |
| for topdown, follow_symlinks in itertools.product((True, False), repeat=2): |
| walk_kwargs.update(topdown=topdown, followlinks=follow_symlinks) |
| fwalk_kwargs.update(topdown=topdown, follow_symlinks=follow_symlinks) |
| |
| expected = {} |
| for root, dirs, files in os.walk(**walk_kwargs): |
| expected[root] = (set(dirs), set(files)) |
| |
| for root, dirs, files, rootfd in os.fwalk(**fwalk_kwargs): |
| self.assertIn(root, expected) |
| self.assertEqual(expected[root], (set(dirs), set(files))) |
| |
| def test_compare_to_walk(self): |
| kwargs = {'top': support.TESTFN} |
| self._compare_to_walk(kwargs, kwargs) |
| |
| def test_dir_fd(self): |
| try: |
| fd = os.open(".", os.O_RDONLY) |
| walk_kwargs = {'top': support.TESTFN} |
| fwalk_kwargs = walk_kwargs.copy() |
| fwalk_kwargs['dir_fd'] = fd |
| self._compare_to_walk(walk_kwargs, fwalk_kwargs) |
| finally: |
| os.close(fd) |
| |
| def test_yields_correct_dir_fd(self): |
| # check returned file descriptors |
| for topdown, follow_symlinks in itertools.product((True, False), repeat=2): |
| args = support.TESTFN, topdown, None |
| for root, dirs, files, rootfd in os.fwalk(*args, follow_symlinks=follow_symlinks): |
| # check that the FD is valid |
| os.fstat(rootfd) |
| # redundant check |
| os.stat(rootfd) |
| # check that listdir() returns consistent information |
| self.assertEqual(set(os.listdir(rootfd)), set(dirs) | set(files)) |
| |
| def test_fd_leak(self): |
| # Since we're opening a lot of FDs, we must be careful to avoid leaks: |
| # we both check that calling fwalk() a large number of times doesn't |
| # yield EMFILE, and that the minimum allocated FD hasn't changed. |
| minfd = os.dup(1) |
| os.close(minfd) |
| for i in range(256): |
| for x in os.fwalk(support.TESTFN): |
| pass |
| newfd = os.dup(1) |
| self.addCleanup(os.close, newfd) |
| self.assertEqual(newfd, minfd) |
| |
| def tearDown(self): |
| # cleanup |
| for root, dirs, files, rootfd in os.fwalk(support.TESTFN, topdown=False): |
| for name in files: |
| os.unlink(name, dir_fd=rootfd) |
| for name in dirs: |
| st = os.stat(name, dir_fd=rootfd, follow_symlinks=False) |
| if stat.S_ISDIR(st.st_mode): |
| os.rmdir(name, dir_fd=rootfd) |
| else: |
| os.unlink(name, dir_fd=rootfd) |
| os.rmdir(support.TESTFN) |
| |
| |
| class MakedirTests(unittest.TestCase): |
| def setUp(self): |
| os.mkdir(support.TESTFN) |
| |
| def test_makedir(self): |
| base = support.TESTFN |
| path = os.path.join(base, 'dir1', 'dir2', 'dir3') |
| os.makedirs(path) # Should work |
| path = os.path.join(base, 'dir1', 'dir2', 'dir3', 'dir4') |
| os.makedirs(path) |
| |
| # Try paths with a '.' in them |
| self.assertRaises(OSError, os.makedirs, os.curdir) |
| path = os.path.join(base, 'dir1', 'dir2', 'dir3', 'dir4', 'dir5', os.curdir) |
| os.makedirs(path) |
| path = os.path.join(base, 'dir1', os.curdir, 'dir2', 'dir3', 'dir4', |
| 'dir5', 'dir6') |
| os.makedirs(path) |
| |
| def test_exist_ok_existing_directory(self): |
| path = os.path.join(support.TESTFN, 'dir1') |
| mode = 0o777 |
| old_mask = os.umask(0o022) |
| os.makedirs(path, mode) |
| self.assertRaises(OSError, os.makedirs, path, mode) |
| self.assertRaises(OSError, os.makedirs, path, mode, exist_ok=False) |
| os.makedirs(path, 0o776, exist_ok=True) |
| os.makedirs(path, mode=mode, exist_ok=True) |
| os.umask(old_mask) |
| |
| @unittest.skipUnless(hasattr(os, 'chown'), 'test needs os.chown') |
| def test_chown_uid_gid_arguments_must_be_index(self): |
| stat = os.stat(support.TESTFN) |
| uid = stat.st_uid |
| gid = stat.st_gid |
| for value in (-1.0, -1j, decimal.Decimal(-1), fractions.Fraction(-2, 2)): |
| self.assertRaises(TypeError, os.chown, support.TESTFN, value, gid) |
| self.assertRaises(TypeError, os.chown, support.TESTFN, uid, value) |
| self.assertIsNone(os.chown(support.TESTFN, uid, gid)) |
| self.assertIsNone(os.chown(support.TESTFN, -1, -1)) |
| |
| def test_exist_ok_s_isgid_directory(self): |
| path = os.path.join(support.TESTFN, 'dir1') |
| S_ISGID = stat.S_ISGID |
| mode = 0o777 |
| old_mask = os.umask(0o022) |
| try: |
| existing_testfn_mode = stat.S_IMODE( |
| os.lstat(support.TESTFN).st_mode) |
| try: |
| os.chmod(support.TESTFN, existing_testfn_mode | S_ISGID) |
| except PermissionError: |
| raise unittest.SkipTest('Cannot set S_ISGID for dir.') |
| if (os.lstat(support.TESTFN).st_mode & S_ISGID != S_ISGID): |
| raise unittest.SkipTest('No support for S_ISGID dir mode.') |
| # The os should apply S_ISGID from the parent dir for us, but |
| # this test need not depend on that behavior. Be explicit. |
| os.makedirs(path, mode | S_ISGID) |
| # http://bugs.python.org/issue14992 |
| # Should not fail when the bit is already set. |
| os.makedirs(path, mode, exist_ok=True) |
| # remove the bit. |
| os.chmod(path, stat.S_IMODE(os.lstat(path).st_mode) & ~S_ISGID) |
| # May work even when the bit is not already set when demanded. |
| os.makedirs(path, mode | S_ISGID, exist_ok=True) |
| finally: |
| os.umask(old_mask) |
| |
| def test_exist_ok_existing_regular_file(self): |
| base = support.TESTFN |
| path = os.path.join(support.TESTFN, 'dir1') |
| f = open(path, 'w') |
| f.write('abc') |
| f.close() |
| self.assertRaises(OSError, os.makedirs, path) |
| self.assertRaises(OSError, os.makedirs, path, exist_ok=False) |
| self.assertRaises(OSError, os.makedirs, path, exist_ok=True) |
| os.remove(path) |
| |
| def tearDown(self): |
| path = os.path.join(support.TESTFN, 'dir1', 'dir2', 'dir3', |
| 'dir4', 'dir5', 'dir6') |
| # If the tests failed, the bottom-most directory ('../dir6') |
| # may not have been created, so we look for the outermost directory |
| # that exists. |
| while not os.path.exists(path) and path != support.TESTFN: |
| path = os.path.dirname(path) |
| |
| os.removedirs(path) |
| |
| |
| class RemoveDirsTests(unittest.TestCase): |
| def setUp(self): |
| os.makedirs(support.TESTFN) |
| |
| def tearDown(self): |
| support.rmtree(support.TESTFN) |
| |
| def test_remove_all(self): |
| dira = os.path.join(support.TESTFN, 'dira') |
| os.mkdir(dira) |
| dirb = os.path.join(dira, 'dirb') |
| os.mkdir(dirb) |
| os.removedirs(dirb) |
| self.assertFalse(os.path.exists(dirb)) |
| self.assertFalse(os.path.exists(dira)) |
| self.assertFalse(os.path.exists(support.TESTFN)) |
| |
| def test_remove_partial(self): |
| dira = os.path.join(support.TESTFN, 'dira') |
| os.mkdir(dira) |
| dirb = os.path.join(dira, 'dirb') |
| os.mkdir(dirb) |
| with open(os.path.join(dira, 'file.txt'), 'w') as f: |
| f.write('text') |
| os.removedirs(dirb) |
| self.assertFalse(os.path.exists(dirb)) |
| self.assertTrue(os.path.exists(dira)) |
| self.assertTrue(os.path.exists(support.TESTFN)) |
| |
| def test_remove_nothing(self): |
| dira = os.path.join(support.TESTFN, 'dira') |
| os.mkdir(dira) |
| dirb = os.path.join(dira, 'dirb') |
| os.mkdir(dirb) |
| with open(os.path.join(dirb, 'file.txt'), 'w') as f: |
| f.write('text') |
| with self.assertRaises(OSError): |
| os.removedirs(dirb) |
| self.assertTrue(os.path.exists(dirb)) |
| self.assertTrue(os.path.exists(dira)) |
| self.assertTrue(os.path.exists(support.TESTFN)) |
| |
| |
| class DevNullTests(unittest.TestCase): |
| def test_devnull(self): |
| with open(os.devnull, 'wb') as f: |
| f.write(b'hello') |
| f.close() |
| with open(os.devnull, 'rb') as f: |
| self.assertEqual(f.read(), b'') |
| |
| |
| class URandomTests(unittest.TestCase): |
| def test_urandom_length(self): |
| self.assertEqual(len(os.urandom(0)), 0) |
| self.assertEqual(len(os.urandom(1)), 1) |
| self.assertEqual(len(os.urandom(10)), 10) |
| self.assertEqual(len(os.urandom(100)), 100) |
| self.assertEqual(len(os.urandom(1000)), 1000) |
| |
| def test_urandom_value(self): |
| data1 = os.urandom(16) |
| data2 = os.urandom(16) |
| self.assertNotEqual(data1, data2) |
| |
| def get_urandom_subprocess(self, count): |
| code = '\n'.join(( |
| 'import os, sys', |
| 'data = os.urandom(%s)' % count, |
| 'sys.stdout.buffer.write(data)', |
| 'sys.stdout.buffer.flush()')) |
| out = assert_python_ok('-c', code) |
| stdout = out[1] |
| self.assertEqual(len(stdout), 16) |
| return stdout |
| |
| def test_urandom_subprocess(self): |
| data1 = self.get_urandom_subprocess(16) |
| data2 = self.get_urandom_subprocess(16) |
| self.assertNotEqual(data1, data2) |
| |
| |
| HAVE_GETENTROPY = (sysconfig.get_config_var('HAVE_GETENTROPY') == 1) |
| |
| @unittest.skipIf(HAVE_GETENTROPY, |
| "getentropy() does not use a file descriptor") |
| class URandomFDTests(unittest.TestCase): |
| @unittest.skipUnless(resource, "test requires the resource module") |
| def test_urandom_failure(self): |
| # Check urandom() failing when it is not able to open /dev/random. |
| # We spawn a new process to make the test more robust (if getrlimit() |
| # failed to restore the file descriptor limit after this, the whole |
| # test suite would crash; this actually happened on the OS X Tiger |
| # buildbot). |
| code = """if 1: |
| import errno |
| import os |
| import resource |
| |
| soft_limit, hard_limit = resource.getrlimit(resource.RLIMIT_NOFILE) |
| resource.setrlimit(resource.RLIMIT_NOFILE, (1, hard_limit)) |
| try: |
| os.urandom(16) |
| except OSError as e: |
| assert e.errno == errno.EMFILE, e.errno |
| else: |
| raise AssertionError("OSError not raised") |
| """ |
| assert_python_ok('-c', code) |
| |
| def test_urandom_fd_closed(self): |
| # Issue #21207: urandom() should reopen its fd to /dev/urandom if |
| # closed. |
| code = """if 1: |
| import os |
| import sys |
| os.urandom(4) |
| os.closerange(3, 256) |
| sys.stdout.buffer.write(os.urandom(4)) |
| """ |
| rc, out, err = assert_python_ok('-Sc', code) |
| |
| def test_urandom_fd_reopened(self): |
| # Issue #21207: urandom() should detect its fd to /dev/urandom |
| # changed to something else, and reopen it. |
| with open(support.TESTFN, 'wb') as f: |
| f.write(b"x" * 256) |
| self.addCleanup(os.unlink, support.TESTFN) |
| code = """if 1: |
| import os |
| import sys |
| os.urandom(4) |
| for fd in range(3, 256): |
| try: |
| os.close(fd) |
| except OSError: |
| pass |
| else: |
| # Found the urandom fd (XXX hopefully) |
| break |
| os.closerange(3, 256) |
| with open({TESTFN!r}, 'rb') as f: |
| os.dup2(f.fileno(), fd) |
| sys.stdout.buffer.write(os.urandom(4)) |
| sys.stdout.buffer.write(os.urandom(4)) |
| """.format(TESTFN=support.TESTFN) |
| rc, out, err = assert_python_ok('-Sc', code) |
| self.assertEqual(len(out), 8) |
| self.assertNotEqual(out[0:4], out[4:8]) |
| rc, out2, err2 = assert_python_ok('-Sc', code) |
| self.assertEqual(len(out2), 8) |
| self.assertNotEqual(out2, out) |
| |
| |
| @contextlib.contextmanager |
| def _execvpe_mockup(defpath=None): |
| """ |
| Stubs out execv and execve functions when used as context manager. |
| Records exec calls. The mock execv and execve functions always raise an |
| exception as they would normally never return. |
| """ |
| # A list of tuples containing (function name, first arg, args) |
| # of calls to execv or execve that have been made. |
| calls = [] |
| |
| def mock_execv(name, *args): |
| calls.append(('execv', name, args)) |
| raise RuntimeError("execv called") |
| |
| def mock_execve(name, *args): |
| calls.append(('execve', name, args)) |
| raise OSError(errno.ENOTDIR, "execve called") |
| |
| try: |
| orig_execv = os.execv |
| orig_execve = os.execve |
| orig_defpath = os.defpath |
| os.execv = mock_execv |
| os.execve = mock_execve |
| if defpath is not None: |
| os.defpath = defpath |
| yield calls |
| finally: |
| os.execv = orig_execv |
| os.execve = orig_execve |
| os.defpath = orig_defpath |
| |
| class ExecTests(unittest.TestCase): |
| @unittest.skipIf(USING_LINUXTHREADS, |
| "avoid triggering a linuxthreads bug: see issue #4970") |
| def test_execvpe_with_bad_program(self): |
| self.assertRaises(OSError, os.execvpe, 'no such app-', |
| ['no such app-'], None) |
| |
| def test_execvpe_with_bad_arglist(self): |
| self.assertRaises(ValueError, os.execvpe, 'notepad', [], None) |
| |
| @unittest.skipUnless(hasattr(os, '_execvpe'), |
| "No internal os._execvpe function to test.") |
| def _test_internal_execvpe(self, test_type): |
| program_path = os.sep + 'absolutepath' |
| if test_type is bytes: |
| program = b'executable' |
| fullpath = os.path.join(os.fsencode(program_path), program) |
| native_fullpath = fullpath |
| arguments = [b'progname', 'arg1', 'arg2'] |
| else: |
| program = 'executable' |
| arguments = ['progname', 'arg1', 'arg2'] |
| fullpath = os.path.join(program_path, program) |
| if os.name != "nt": |
| native_fullpath = os.fsencode(fullpath) |
| else: |
| native_fullpath = fullpath |
| env = {'spam': 'beans'} |
| |
| # test os._execvpe() with an absolute path |
| with _execvpe_mockup() as calls: |
| self.assertRaises(RuntimeError, |
| os._execvpe, fullpath, arguments) |
| self.assertEqual(len(calls), 1) |
| self.assertEqual(calls[0], ('execv', fullpath, (arguments,))) |
| |
| # test os._execvpe() with a relative path: |
| # os.get_exec_path() returns defpath |
| with _execvpe_mockup(defpath=program_path) as calls: |
| self.assertRaises(OSError, |
| os._execvpe, program, arguments, env=env) |
| self.assertEqual(len(calls), 1) |
| self.assertSequenceEqual(calls[0], |
| ('execve', native_fullpath, (arguments, env))) |
| |
| # test os._execvpe() with a relative path: |
| # os.get_exec_path() reads the 'PATH' variable |
| with _execvpe_mockup() as calls: |
| env_path = env.copy() |
| if test_type is bytes: |
| env_path[b'PATH'] = program_path |
| else: |
| env_path['PATH'] = program_path |
| self.assertRaises(OSError, |
| os._execvpe, program, arguments, env=env_path) |
| self.assertEqual(len(calls), 1) |
| self.assertSequenceEqual(calls[0], |
| ('execve', native_fullpath, (arguments, env_path))) |
| |
| def test_internal_execvpe_str(self): |
| self._test_internal_execvpe(str) |
| if os.name != "nt": |
| self._test_internal_execvpe(bytes) |
| |
| |
| @unittest.skipUnless(sys.platform == "win32", "Win32 specific tests") |
| class Win32ErrorTests(unittest.TestCase): |
| def test_rename(self): |
| self.assertRaises(OSError, os.rename, support.TESTFN, support.TESTFN+".bak") |
| |
| def test_remove(self): |
| self.assertRaises(OSError, os.remove, support.TESTFN) |
| |
| def test_chdir(self): |
| self.assertRaises(OSError, os.chdir, support.TESTFN) |
| |
| def test_mkdir(self): |
| f = open(support.TESTFN, "w") |
| try: |
| self.assertRaises(OSError, os.mkdir, support.TESTFN) |
| finally: |
| f.close() |
| os.unlink(support.TESTFN) |
| |
| def test_utime(self): |
| self.assertRaises(OSError, os.utime, support.TESTFN, None) |
| |
| def test_chmod(self): |
| self.assertRaises(OSError, os.chmod, support.TESTFN, 0) |
| |
| class TestInvalidFD(unittest.TestCase): |
| singles = ["fchdir", "dup", "fdopen", "fdatasync", "fstat", |
| "fstatvfs", "fsync", "tcgetpgrp", "ttyname"] |
| #singles.append("close") |
| #We omit close because it doesn'r raise an exception on some platforms |
| def get_single(f): |
| def helper(self): |
| if hasattr(os, f): |
| self.check(getattr(os, f)) |
| return helper |
| for f in singles: |
| locals()["test_"+f] = get_single(f) |
| |
| def check(self, f, *args): |
| try: |
| f(support.make_bad_fd(), *args) |
| except OSError as e: |
| self.assertEqual(e.errno, errno.EBADF) |
| else: |
| self.fail("%r didn't raise an OSError with a bad file descriptor" |
| % f) |
| |
| @unittest.skipUnless(hasattr(os, 'isatty'), 'test needs os.isatty()') |
| def test_isatty(self): |
| self.assertEqual(os.isatty(support.make_bad_fd()), False) |
| |
| @unittest.skipUnless(hasattr(os, 'closerange'), 'test needs os.closerange()') |
| def test_closerange(self): |
| fd = support.make_bad_fd() |
| # Make sure none of the descriptors we are about to close are |
| # currently valid (issue 6542). |
| for i in range(10): |
| try: os.fstat(fd+i) |
| except OSError: |
| pass |
| else: |
| break |
| if i < 2: |
| raise unittest.SkipTest( |
| "Unable to acquire a range of invalid file descriptors") |
| self.assertEqual(os.closerange(fd, fd + i-1), None) |
| |
| @unittest.skipUnless(hasattr(os, 'dup2'), 'test needs os.dup2()') |
| def test_dup2(self): |
| self.check(os.dup2, 20) |
| |
| @unittest.skipUnless(hasattr(os, 'fchmod'), 'test needs os.fchmod()') |
| def test_fchmod(self): |
| self.check(os.fchmod, 0) |
| |
| @unittest.skipUnless(hasattr(os, 'fchown'), 'test needs os.fchown()') |
| def test_fchown(self): |
| self.check(os.fchown, -1, -1) |
| |
| @unittest.skipUnless(hasattr(os, 'fpathconf'), 'test needs os.fpathconf()') |
| def test_fpathconf(self): |
| self.check(os.pathconf, "PC_NAME_MAX") |
| self.check(os.fpathconf, "PC_NAME_MAX") |
| |
| @unittest.skipUnless(hasattr(os, 'ftruncate'), 'test needs os.ftruncate()') |
| def test_ftruncate(self): |
| self.check(os.truncate, 0) |
| self.check(os.ftruncate, 0) |
| |
| @unittest.skipUnless(hasattr(os, 'lseek'), 'test needs os.lseek()') |
| def test_lseek(self): |
| self.check(os.lseek, 0, 0) |
| |
| @unittest.skipUnless(hasattr(os, 'read'), 'test needs os.read()') |
| def test_read(self): |
| self.check(os.read, 1) |
| |
| @unittest.skipUnless(hasattr(os, 'readv'), 'test needs os.readv()') |
| def test_readv(self): |
| buf = bytearray(10) |
| self.check(os.readv, [buf]) |
| |
| @unittest.skipUnless(hasattr(os, 'tcsetpgrp'), 'test needs os.tcsetpgrp()') |
| def test_tcsetpgrpt(self): |
| self.check(os.tcsetpgrp, 0) |
| |
| @unittest.skipUnless(hasattr(os, 'write'), 'test needs os.write()') |
| def test_write(self): |
| self.check(os.write, b" ") |
| |
| @unittest.skipUnless(hasattr(os, 'writev'), 'test needs os.writev()') |
| def test_writev(self): |
| self.check(os.writev, [b'abc']) |
| |
| |
| class LinkTests(unittest.TestCase): |
| def setUp(self): |
| self.file1 = support.TESTFN |
| self.file2 = os.path.join(support.TESTFN + "2") |
| |
| def tearDown(self): |
| for file in (self.file1, self.file2): |
| if os.path.exists(file): |
| os.unlink(file) |
| |
| def _test_link(self, file1, file2): |
| with open(file1, "w") as f1: |
| f1.write("test") |
| |
| with warnings.catch_warnings(): |
| warnings.simplefilter("ignore", DeprecationWarning) |
| os.link(file1, file2) |
| with open(file1, "r") as f1, open(file2, "r") as f2: |
| self.assertTrue(os.path.sameopenfile(f1.fileno(), f2.fileno())) |
| |
| def test_link(self): |
| self._test_link(self.file1, self.file2) |
| |
| def test_link_bytes(self): |
| self._test_link(bytes(self.file1, sys.getfilesystemencoding()), |
| bytes(self.file2, sys.getfilesystemencoding())) |
| |
| def test_unicode_name(self): |
| try: |
| os.fsencode("\xf1") |
| except UnicodeError: |
| raise unittest.SkipTest("Unable to encode for this platform.") |
| |
| self.file1 += "\xf1" |
| self.file2 = self.file1 + "2" |
| self._test_link(self.file1, self.file2) |
| |
| @unittest.skipIf(sys.platform == "win32", "Posix specific tests") |
| class PosixUidGidTests(unittest.TestCase): |
| @unittest.skipUnless(hasattr(os, 'setuid'), 'test needs os.setuid()') |
| def test_setuid(self): |
| if os.getuid() != 0: |
| self.assertRaises(OSError, os.setuid, 0) |
| self.assertRaises(OverflowError, os.setuid, 1<<32) |
| |
| @unittest.skipUnless(hasattr(os, 'setgid'), 'test needs os.setgid()') |
| def test_setgid(self): |
| if os.getuid() != 0 and not HAVE_WHEEL_GROUP: |
| self.assertRaises(OSError, os.setgid, 0) |
| self.assertRaises(OverflowError, os.setgid, 1<<32) |
| |
| @unittest.skipUnless(hasattr(os, 'seteuid'), 'test needs os.seteuid()') |
| def test_seteuid(self): |
| if os.getuid() != 0: |
| self.assertRaises(OSError, os.seteuid, 0) |
| self.assertRaises(OverflowError, os.seteuid, 1<<32) |
| |
| @unittest.skipUnless(hasattr(os, 'setegid'), 'test needs os.setegid()') |
| def test_setegid(self): |
| if os.getuid() != 0 and not HAVE_WHEEL_GROUP: |
| self.assertRaises(OSError, os.setegid, 0) |
| self.assertRaises(OverflowError, os.setegid, 1<<32) |
| |
| @unittest.skipUnless(hasattr(os, 'setreuid'), 'test needs os.setreuid()') |
| def test_setreuid(self): |
| if os.getuid() != 0: |
| self.assertRaises(OSError, os.setreuid, 0, 0) |
| self.assertRaises(OverflowError, os.setreuid, 1<<32, 0) |
| self.assertRaises(OverflowError, os.setreuid, 0, 1<<32) |
| |
| @unittest.skipUnless(hasattr(os, 'setreuid'), 'test needs os.setreuid()') |
| def test_setreuid_neg1(self): |
| # Needs to accept -1. We run this in a subprocess to avoid |
| # altering the test runner's process state (issue8045). |
| subprocess.check_call([ |
| sys.executable, '-c', |
| 'import os,sys;os.setreuid(-1,-1);sys.exit(0)']) |
| |
| @unittest.skipUnless(hasattr(os, 'setregid'), 'test needs os.setregid()') |
| def test_setregid(self): |
| if os.getuid() != 0 and not HAVE_WHEEL_GROUP: |
| self.assertRaises(OSError, os.setregid, 0, 0) |
| self.assertRaises(OverflowError, os.setregid, 1<<32, 0) |
| self.assertRaises(OverflowError, os.setregid, 0, 1<<32) |
| |
| @unittest.skipUnless(hasattr(os, 'setregid'), 'test needs os.setregid()') |
| def test_setregid_neg1(self): |
| # Needs to accept -1. We run this in a subprocess to avoid |
| # altering the test runner's process state (issue8045). |
| subprocess.check_call([ |
| sys.executable, '-c', |
| 'import os,sys;os.setregid(-1,-1);sys.exit(0)']) |
| |
| @unittest.skipIf(sys.platform == "win32", "Posix specific tests") |
| class Pep383Tests(unittest.TestCase): |
| def setUp(self): |
| if support.TESTFN_UNENCODABLE: |
| self.dir = support.TESTFN_UNENCODABLE |
| elif support.TESTFN_NONASCII: |
| self.dir = support.TESTFN_NONASCII |
| else: |
| self.dir = support.TESTFN |
| self.bdir = os.fsencode(self.dir) |
| |
| bytesfn = [] |
| def add_filename(fn): |
| try: |
| fn = os.fsencode(fn) |
| except UnicodeEncodeError: |
| return |
| bytesfn.append(fn) |
| add_filename(support.TESTFN_UNICODE) |
| if support.TESTFN_UNENCODABLE: |
| add_filename(support.TESTFN_UNENCODABLE) |
| if support.TESTFN_NONASCII: |
| add_filename(support.TESTFN_NONASCII) |
| if not bytesfn: |
| self.skipTest("couldn't create any non-ascii filename") |
| |
| self.unicodefn = set() |
| os.mkdir(self.dir) |
| try: |
| for fn in bytesfn: |
| support.create_empty_file(os.path.join(self.bdir, fn)) |
| fn = os.fsdecode(fn) |
| if fn in self.unicodefn: |
| raise ValueError("duplicate filename") |
| self.unicodefn.add(fn) |
| except: |
| shutil.rmtree(self.dir) |
| raise |
| |
| def tearDown(self): |
| shutil.rmtree(self.dir) |
| |
| def test_listdir(self): |
| expected = self.unicodefn |
| found = set(os.listdir(self.dir)) |
| self.assertEqual(found, expected) |
| # test listdir without arguments |
| current_directory = os.getcwd() |
| try: |
| os.chdir(os.sep) |
| self.assertEqual(set(os.listdir()), set(os.listdir(os.sep))) |
| finally: |
| os.chdir(current_directory) |
| |
| def test_open(self): |
| for fn in self.unicodefn: |
| f = open(os.path.join(self.dir, fn), 'rb') |
| f.close() |
| |
| @unittest.skipUnless(hasattr(os, 'statvfs'), |
| "need os.statvfs()") |
| def test_statvfs(self): |
| # issue #9645 |
| for fn in self.unicodefn: |
| # should not fail with file not found error |
| fullname = os.path.join(self.dir, fn) |
| os.statvfs(fullname) |
| |
| def test_stat(self): |
| for fn in self.unicodefn: |
| os.stat(os.path.join(self.dir, fn)) |
| |
| @unittest.skipUnless(sys.platform == "win32", "Win32 specific tests") |
| class Win32KillTests(unittest.TestCase): |
| def _kill(self, sig): |
| # Start sys.executable as a subprocess and communicate from the |
| # subprocess to the parent that the interpreter is ready. When it |
| # becomes ready, send *sig* via os.kill to the subprocess and check |
| # that the return code is equal to *sig*. |
| import ctypes |
| from ctypes import wintypes |
| import msvcrt |
| |
| # Since we can't access the contents of the process' stdout until the |
| # process has exited, use PeekNamedPipe to see what's inside stdout |
| # without waiting. This is done so we can tell that the interpreter |
| # is started and running at a point where it could handle a signal. |
| PeekNamedPipe = ctypes.windll.kernel32.PeekNamedPipe |
| PeekNamedPipe.restype = wintypes.BOOL |
| PeekNamedPipe.argtypes = (wintypes.HANDLE, # Pipe handle |
| ctypes.POINTER(ctypes.c_char), # stdout buf |
| wintypes.DWORD, # Buffer size |
| ctypes.POINTER(wintypes.DWORD), # bytes read |
| ctypes.POINTER(wintypes.DWORD), # bytes avail |
| ctypes.POINTER(wintypes.DWORD)) # bytes left |
| msg = "running" |
| proc = subprocess.Popen([sys.executable, "-c", |
| "import sys;" |
| "sys.stdout.write('{}');" |
| "sys.stdout.flush();" |
| "input()".format(msg)], |
| stdout=subprocess.PIPE, |
| stderr=subprocess.PIPE, |
| stdin=subprocess.PIPE) |
| self.addCleanup(proc.stdout.close) |
| self.addCleanup(proc.stderr.close) |
| self.addCleanup(proc.stdin.close) |
| |
| count, max = 0, 100 |
| while count < max and proc.poll() is None: |
| # Create a string buffer to store the result of stdout from the pipe |
| buf = ctypes.create_string_buffer(len(msg)) |
| # Obtain the text currently in proc.stdout |
| # Bytes read/avail/left are left as NULL and unused |
| rslt = PeekNamedPipe(msvcrt.get_osfhandle(proc.stdout.fileno()), |
| buf, ctypes.sizeof(buf), None, None, None) |
| self.assertNotEqual(rslt, 0, "PeekNamedPipe failed") |
| if buf.value: |
| self.assertEqual(msg, buf.value.decode()) |
| break |
| time.sleep(0.1) |
| count += 1 |
| else: |
| self.fail("Did not receive communication from the subprocess") |
| |
| os.kill(proc.pid, sig) |
| self.assertEqual(proc.wait(), sig) |
| |
| def test_kill_sigterm(self): |
| # SIGTERM doesn't mean anything special, but make sure it works |
| self._kill(signal.SIGTERM) |
| |
| def test_kill_int(self): |
| # os.kill on Windows can take an int which gets set as the exit code |
| self._kill(100) |
| |
| def _kill_with_event(self, event, name): |
| tagname = "test_os_%s" % uuid.uuid1() |
| m = mmap.mmap(-1, 1, tagname) |
| m[0] = 0 |
| # Run a script which has console control handling enabled. |
| proc = subprocess.Popen([sys.executable, |
| os.path.join(os.path.dirname(__file__), |
| "win_console_handler.py"), tagname], |
| creationflags=subprocess.CREATE_NEW_PROCESS_GROUP) |
| # Let the interpreter startup before we send signals. See #3137. |
| count, max = 0, 100 |
| while count < max and proc.poll() is None: |
| if m[0] == 1: |
| break |
| time.sleep(0.1) |
| count += 1 |
| else: |
| # Forcefully kill the process if we weren't able to signal it. |
| os.kill(proc.pid, signal.SIGINT) |
| self.fail("Subprocess didn't finish initialization") |
| os.kill(proc.pid, event) |
| # proc.send_signal(event) could also be done here. |
| # Allow time for the signal to be passed and the process to exit. |
| time.sleep(0.5) |
| if not proc.poll(): |
| # Forcefully kill the process if we weren't able to signal it. |
| os.kill(proc.pid, signal.SIGINT) |
| self.fail("subprocess did not stop on {}".format(name)) |
| |
| @unittest.skip("subprocesses aren't inheriting Ctrl+C property") |
| def test_CTRL_C_EVENT(self): |
| from ctypes import wintypes |
| import ctypes |
| |
| # Make a NULL value by creating a pointer with no argument. |
| NULL = ctypes.POINTER(ctypes.c_int)() |
| SetConsoleCtrlHandler = ctypes.windll.kernel32.SetConsoleCtrlHandler |
| SetConsoleCtrlHandler.argtypes = (ctypes.POINTER(ctypes.c_int), |
| wintypes.BOOL) |
| SetConsoleCtrlHandler.restype = wintypes.BOOL |
| |
| # Calling this with NULL and FALSE causes the calling process to |
| # handle Ctrl+C, rather than ignore it. This property is inherited |
| # by subprocesses. |
| SetConsoleCtrlHandler(NULL, 0) |
| |
| self._kill_with_event(signal.CTRL_C_EVENT, "CTRL_C_EVENT") |
| |
| def test_CTRL_BREAK_EVENT(self): |
| self._kill_with_event(signal.CTRL_BREAK_EVENT, "CTRL_BREAK_EVENT") |
| |
| |
| @unittest.skipUnless(sys.platform == "win32", "Win32 specific tests") |
| class Win32ListdirTests(unittest.TestCase): |
| """Test listdir on Windows.""" |
| |
| def setUp(self): |
| self.created_paths = [] |
| for i in range(2): |
| dir_name = 'SUB%d' % i |
| dir_path = os.path.join(support.TESTFN, dir_name) |
| file_name = 'FILE%d' % i |
| file_path = os.path.join(support.TESTFN, file_name) |
| os.makedirs(dir_path) |
| with open(file_path, 'w') as f: |
| f.write("I'm %s and proud of it. Blame test_os.\n" % file_path) |
| self.created_paths.extend([dir_name, file_name]) |
| self.created_paths.sort() |
| |
| def tearDown(self): |
| shutil.rmtree(support.TESTFN) |
| |
| def test_listdir_no_extended_path(self): |
| """Test when the path is not an "extended" path.""" |
| # unicode |
| self.assertEqual( |
| sorted(os.listdir(support.TESTFN)), |
| self.created_paths) |
| # bytes |
| self.assertEqual( |
| sorted(os.listdir(os.fsencode(support.TESTFN))), |
| [os.fsencode(path) for path in self.created_paths]) |
| |
| def test_listdir_extended_path(self): |
| """Test when the path starts with '\\\\?\\'.""" |
| # See: http://msdn.microsoft.com/en-us/library/windows/desktop/aa365247(v=vs.85).aspx#maxpath |
| # unicode |
| path = '\\\\?\\' + os.path.abspath(support.TESTFN) |
| self.assertEqual( |
| sorted(os.listdir(path)), |
| self.created_paths) |
| # bytes |
| path = b'\\\\?\\' + os.fsencode(os.path.abspath(support.TESTFN)) |
| self.assertEqual( |
| sorted(os.listdir(path)), |
| [os.fsencode(path) for path in self.created_paths]) |
| |
| |
| @unittest.skipUnless(sys.platform == "win32", "Win32 specific tests") |
| @support.skip_unless_symlink |
| class Win32SymlinkTests(unittest.TestCase): |
| filelink = 'filelinktest' |
| filelink_target = os.path.abspath(__file__) |
| dirlink = 'dirlinktest' |
| dirlink_target = os.path.dirname(filelink_target) |
| missing_link = 'missing link' |
| |
| def setUp(self): |
| assert os.path.exists(self.dirlink_target) |
| assert os.path.exists(self.filelink_target) |
| assert not os.path.exists(self.dirlink) |
| assert not os.path.exists(self.filelink) |
| assert not os.path.exists(self.missing_link) |
| |
| def tearDown(self): |
| if os.path.exists(self.filelink): |
| os.remove(self.filelink) |
| if os.path.exists(self.dirlink): |
| os.rmdir(self.dirlink) |
| if os.path.lexists(self.missing_link): |
| os.remove(self.missing_link) |
| |
| def test_directory_link(self): |
| os.symlink(self.dirlink_target, self.dirlink) |
| self.assertTrue(os.path.exists(self.dirlink)) |
| self.assertTrue(os.path.isdir(self.dirlink)) |
| self.assertTrue(os.path.islink(self.dirlink)) |
| self.check_stat(self.dirlink, self.dirlink_target) |
| |
| def test_file_link(self): |
| os.symlink(self.filelink_target, self.filelink) |
| self.assertTrue(os.path.exists(self.filelink)) |
| self.assertTrue(os.path.isfile(self.filelink)) |
| self.assertTrue(os.path.islink(self.filelink)) |
| self.check_stat(self.filelink, self.filelink_target) |
| |
| def _create_missing_dir_link(self): |
| 'Create a "directory" link to a non-existent target' |
| linkname = self.missing_link |
| if os.path.lexists(linkname): |
| os.remove(linkname) |
| target = r'c:\\target does not exist.29r3c740' |
| assert not os.path.exists(target) |
| target_is_dir = True |
| os.symlink(target, linkname, target_is_dir) |
| |
| def test_remove_directory_link_to_missing_target(self): |
| self._create_missing_dir_link() |
| # For compatibility with Unix, os.remove will check the |
| # directory status and call RemoveDirectory if the symlink |
| # was created with target_is_dir==True. |
| os.remove(self.missing_link) |
| |
| @unittest.skip("currently fails; consider for improvement") |
| def test_isdir_on_directory_link_to_missing_target(self): |
| self._create_missing_dir_link() |
| # consider having isdir return true for directory links |
| self.assertTrue(os.path.isdir(self.missing_link)) |
| |
| @unittest.skip("currently fails; consider for improvement") |
| def test_rmdir_on_directory_link_to_missing_target(self): |
| self._create_missing_dir_link() |
| # consider allowing rmdir to remove directory links |
| os.rmdir(self.missing_link) |
| |
| def check_stat(self, link, target): |
| self.assertEqual(os.stat(link), os.stat(target)) |
| self.assertNotEqual(os.lstat(link), os.stat(link)) |
| |
| bytes_link = os.fsencode(link) |
| with warnings.catch_warnings(): |
| warnings.simplefilter("ignore", DeprecationWarning) |
| self.assertEqual(os.stat(bytes_link), os.stat(target)) |
| self.assertNotEqual(os.lstat(bytes_link), os.stat(bytes_link)) |
| |
| def test_12084(self): |
| level1 = os.path.abspath(support.TESTFN) |
| level2 = os.path.join(level1, "level2") |
| level3 = os.path.join(level2, "level3") |
| try: |
| os.mkdir(level1) |
| os.mkdir(level2) |
| os.mkdir(level3) |
| |
| file1 = os.path.abspath(os.path.join(level1, "file1")) |
| |
| with open(file1, "w") as f: |
| f.write("file1") |
| |
| orig_dir = os.getcwd() |
| try: |
| os.chdir(level2) |
| link = os.path.join(level2, "link") |
| os.symlink(os.path.relpath(file1), "link") |
| self.assertIn("link", os.listdir(os.getcwd())) |
| |
| # Check os.stat calls from the same dir as the link |
| self.assertEqual(os.stat(file1), os.stat("link")) |
| |
| # Check os.stat calls from a dir below the link |
| os.chdir(level1) |
| self.assertEqual(os.stat(file1), |
| os.stat(os.path.relpath(link))) |
| |
| # Check os.stat calls from a dir above the link |
| os.chdir(level3) |
| self.assertEqual(os.stat(file1), |
| os.stat(os.path.relpath(link))) |
| finally: |
| os.chdir(orig_dir) |
| except OSError as err: |
| self.fail(err) |
| finally: |
| os.remove(file1) |
| shutil.rmtree(level1) |
| |
| |
| @support.skip_unless_symlink |
| class NonLocalSymlinkTests(unittest.TestCase): |
| |
| def setUp(self): |
| """ |
| Create this structure: |
| |
| base |
| \___ some_dir |
| """ |
| os.makedirs('base/some_dir') |
| |
| def tearDown(self): |
| shutil.rmtree('base') |
| |
| def test_directory_link_nonlocal(self): |
| """ |
| The symlink target should resolve relative to the link, not relative |
| to the current directory. |
| |
| Then, link base/some_link -> base/some_dir and ensure that some_link |
| is resolved as a directory. |
| |
| In issue13772, it was discovered that directory detection failed if |
| the symlink target was not specified relative to the current |
| directory, which was a defect in the implementation. |
| """ |
| src = os.path.join('base', 'some_link') |
| os.symlink('some_dir', src) |
| assert os.path.isdir(src) |
| |
| |
| class FSEncodingTests(unittest.TestCase): |
| def test_nop(self): |
| self.assertEqual(os.fsencode(b'abc\xff'), b'abc\xff') |
| self.assertEqual(os.fsdecode('abc\u0141'), 'abc\u0141') |
| |
| def test_identity(self): |
| # assert fsdecode(fsencode(x)) == x |
| for fn in ('unicode\u0141', 'latin\xe9', 'ascii'): |
| try: |
| bytesfn = os.fsencode(fn) |
| except UnicodeEncodeError: |
| continue |
| self.assertEqual(os.fsdecode(bytesfn), fn) |
| |
| |
| |
| class DeviceEncodingTests(unittest.TestCase): |
| |
| def test_bad_fd(self): |
| # Return None when an fd doesn't actually exist. |
| self.assertIsNone(os.device_encoding(123456)) |
| |
| @unittest.skipUnless(os.isatty(0) and (sys.platform.startswith('win') or |
| (hasattr(locale, 'nl_langinfo') and hasattr(locale, 'CODESET'))), |
| 'test requires a tty and either Windows or nl_langinfo(CODESET)') |
| def test_device_encoding(self): |
| encoding = os.device_encoding(0) |
| self.assertIsNotNone(encoding) |
| self.assertTrue(codecs.lookup(encoding)) |
| |
| |
| class PidTests(unittest.TestCase): |
| @unittest.skipUnless(hasattr(os, 'getppid'), "test needs os.getppid") |
| def test_getppid(self): |
| p = subprocess.Popen([sys.executable, '-c', |
| 'import os; print(os.getppid())'], |
| stdout=subprocess.PIPE) |
| stdout, _ = p.communicate() |
| # We are the parent of our subprocess |
| self.assertEqual(int(stdout), os.getpid()) |
| |
| |
| # The introduction of this TestCase caused at least two different errors on |
| # *nix buildbots. Temporarily skip this to let the buildbots move along. |
| @unittest.skip("Skip due to platform/environment differences on *NIX buildbots") |
| @unittest.skipUnless(hasattr(os, 'getlogin'), "test needs os.getlogin") |
| class LoginTests(unittest.TestCase): |
| def test_getlogin(self): |
| user_name = os.getlogin() |
| self.assertNotEqual(len(user_name), 0) |
| |
| |
| @unittest.skipUnless(hasattr(os, 'getpriority') and hasattr(os, 'setpriority'), |
| "needs os.getpriority and os.setpriority") |
| class ProgramPriorityTests(unittest.TestCase): |
| """Tests for os.getpriority() and os.setpriority().""" |
| |
| def test_set_get_priority(self): |
| |
| base = os.getpriority(os.PRIO_PROCESS, os.getpid()) |
| os.setpriority(os.PRIO_PROCESS, os.getpid(), base + 1) |
| try: |
| new_prio = os.getpriority(os.PRIO_PROCESS, os.getpid()) |
| if base >= 19 and new_prio <= 19: |
| raise unittest.SkipTest( |
| "unable to reliably test setpriority at current nice level of %s" % base) |
| else: |
| self.assertEqual(new_prio, base + 1) |
| finally: |
| try: |
| os.setpriority(os.PRIO_PROCESS, os.getpid(), base) |
| except OSError as err: |
| if err.errno != errno.EACCES: |
| raise |
| |
| |
| if threading is not None: |
| class SendfileTestServer(asyncore.dispatcher, threading.Thread): |
| |
| class Handler(asynchat.async_chat): |
| |
| def __init__(self, conn): |
| asynchat.async_chat.__init__(self, conn) |
| self.in_buffer = [] |
| self.closed = False |
| self.push(b"220 ready\r\n") |
| |
| def handle_read(self): |
| data = self.recv(4096) |
| self.in_buffer.append(data) |
| |
| def get_data(self): |
| return b''.join(self.in_buffer) |
| |
| def handle_close(self): |
| self.close() |
| self.closed = True |
| |
| def handle_error(self): |
| raise |
| |
| def __init__(self, address): |
| threading.Thread.__init__(self) |
| asyncore.dispatcher.__init__(self) |
| self.create_socket(socket.AF_INET, socket.SOCK_STREAM) |
| self.bind(address) |
| self.listen(5) |
| self.host, self.port = self.socket.getsockname()[:2] |
| self.handler_instance = None |
| self._active = False |
| self._active_lock = threading.Lock() |
| |
| # --- public API |
| |
| @property |
| def running(self): |
| return self._active |
| |
| def start(self): |
| assert not self.running |
| self.__flag = threading.Event() |
| threading.Thread.start(self) |
| self.__flag.wait() |
| |
| def stop(self): |
| assert self.running |
| self._active = False |
| self.join() |
| |
| def wait(self): |
| # wait for handler connection to be closed, then stop the server |
| while not getattr(self.handler_instance, "closed", False): |
| time.sleep(0.001) |
| self.stop() |
| |
| # --- internals |
| |
| def run(self): |
| self._active = True |
| self.__flag.set() |
| while self._active and asyncore.socket_map: |
| self._active_lock.acquire() |
| asyncore.loop(timeout=0.001, count=1) |
| self._active_lock.release() |
| asyncore.close_all() |
| |
| def handle_accept(self): |
| conn, addr = self.accept() |
| self.handler_instance = self.Handler(conn) |
| |
| def handle_connect(self): |
| self.close() |
| handle_read = handle_connect |
| |
| def writable(self): |
| return 0 |
| |
| def handle_error(self): |
| raise |
| |
| |
| @unittest.skipUnless(threading is not None, "test needs threading module") |
| @unittest.skipUnless(hasattr(os, 'sendfile'), "test needs os.sendfile()") |
| class TestSendfile(unittest.TestCase): |
| |
| DATA = b"12345abcde" * 16 * 1024 # 160 KB |
| SUPPORT_HEADERS_TRAILERS = not sys.platform.startswith("linux") and \ |
| not sys.platform.startswith("solaris") and \ |
| not sys.platform.startswith("sunos") |
| requires_headers_trailers = unittest.skipUnless(SUPPORT_HEADERS_TRAILERS, |
| 'requires headers and trailers support') |
| |
| @classmethod |
| def setUpClass(cls): |
| with open(support.TESTFN, "wb") as f: |
| f.write(cls.DATA) |
| |
| @classmethod |
| def tearDownClass(cls): |
| support.unlink(support.TESTFN) |
| |
| def setUp(self): |
| self.server = SendfileTestServer((support.HOST, 0)) |
| self.server.start() |
| self.client = socket.socket() |
| self.client.connect((self.server.host, self.server.port)) |
| self.client.settimeout(1) |
| # synchronize by waiting for "220 ready" response |
| self.client.recv(1024) |
| self.sockno = self.client.fileno() |
| self.file = open(support.TESTFN, 'rb') |
| self.fileno = self.file.fileno() |
| |
| def tearDown(self): |
| self.file.close() |
| self.client.close() |
| if self.server.running: |
| self.server.stop() |
| |
| def sendfile_wrapper(self, sock, file, offset, nbytes, headers=[], trailers=[]): |
| """A higher level wrapper representing how an application is |
| supposed to use sendfile(). |
| """ |
| while 1: |
| try: |
| if self.SUPPORT_HEADERS_TRAILERS: |
| return os.sendfile(sock, file, offset, nbytes, headers, |
| trailers) |
| else: |
| return os.sendfile(sock, file, offset, nbytes) |
| except OSError as err: |
| if err.errno == errno.ECONNRESET: |
| # disconnected |
| raise |
| elif err.errno in (errno.EAGAIN, errno.EBUSY): |
| # we have to retry send data |
| continue |
| else: |
| raise |
| |
| def test_send_whole_file(self): |
| # normal send |
| total_sent = 0 |
| offset = 0 |
| nbytes = 4096 |
| while total_sent < len(self.DATA): |
| sent = self.sendfile_wrapper(self.sockno, self.fileno, offset, nbytes) |
| if sent == 0: |
| break |
| offset += sent |
| total_sent += sent |
| self.assertTrue(sent <= nbytes) |
| self.assertEqual(offset, total_sent) |
| |
| self.assertEqual(total_sent, len(self.DATA)) |
| self.client.shutdown(socket.SHUT_RDWR) |
| self.client.close() |
| self.server.wait() |
| data = self.server.handler_instance.get_data() |
| self.assertEqual(len(data), len(self.DATA)) |
| self.assertEqual(data, self.DATA) |
| |
| def test_send_at_certain_offset(self): |
| # start sending a file at a certain offset |
| total_sent = 0 |
| offset = len(self.DATA) // 2 |
| must_send = len(self.DATA) - offset |
| nbytes = 4096 |
| while total_sent < must_send: |
| sent = self.sendfile_wrapper(self.sockno, self.fileno, offset, nbytes) |
| if sent == 0: |
| break |
| offset += sent |
| total_sent += sent |
| self.assertTrue(sent <= nbytes) |
| |
| self.client.shutdown(socket.SHUT_RDWR) |
| self.client.close() |
| self.server.wait() |
| data = self.server.handler_instance.get_data() |
| expected = self.DATA[len(self.DATA) // 2:] |
| self.assertEqual(total_sent, len(expected)) |
| self.assertEqual(len(data), len(expected)) |
| self.assertEqual(data, expected) |
| |
| def test_offset_overflow(self): |
| # specify an offset > file size |
| offset = len(self.DATA) + 4096 |
| try: |
| sent = os.sendfile(self.sockno, self.fileno, offset, 4096) |
| except OSError as e: |
| # Solaris can raise EINVAL if offset >= file length, ignore. |
| if e.errno != errno.EINVAL: |
| raise |
| else: |
| self.assertEqual(sent, 0) |
| self.client.shutdown(socket.SHUT_RDWR) |
| self.client.close() |
| self.server.wait() |
| data = self.server.handler_instance.get_data() |
| self.assertEqual(data, b'') |
| |
| def test_invalid_offset(self): |
| with self.assertRaises(OSError) as cm: |
| os.sendfile(self.sockno, self.fileno, -1, 4096) |
| self.assertEqual(cm.exception.errno, errno.EINVAL) |
| |
| def test_keywords(self): |
| # Keyword arguments should be supported |
| os.sendfile(out=self.sockno, offset=0, count=4096, |
| **{'in': self.fileno}) |
| if self.SUPPORT_HEADERS_TRAILERS: |
| os.sendfile(self.sockno, self.fileno, offset=0, count=4096, |
| headers=(), trailers=(), flags=0) |
| |
| # --- headers / trailers tests |
| |
| @requires_headers_trailers |
| def test_headers(self): |
| total_sent = 0 |
| sent = os.sendfile(self.sockno, self.fileno, 0, 4096, |
| headers=[b"x" * 512]) |
| total_sent += sent |
| offset = 4096 |
| nbytes = 4096 |
| while 1: |
| sent = self.sendfile_wrapper(self.sockno, self.fileno, |
| offset, nbytes) |
| if sent == 0: |
| break |
| total_sent += sent |
| offset += sent |
| |
| expected_data = b"x" * 512 + self.DATA |
| self.assertEqual(total_sent, len(expected_data)) |
| self.client.close() |
| self.server.wait() |
| data = self.server.handler_instance.get_data() |
| self.assertEqual(hash(data), hash(expected_data)) |
| |
| @requires_headers_trailers |
| def test_trailers(self): |
| TESTFN2 = support.TESTFN + "2" |
| file_data = b"abcdef" |
| with open(TESTFN2, 'wb') as f: |
| f.write(file_data) |
| with open(TESTFN2, 'rb')as f: |
| self.addCleanup(os.remove, TESTFN2) |
| os.sendfile(self.sockno, f.fileno(), 0, len(file_data), |
| trailers=[b"1234"]) |
| self.client.close() |
| self.server.wait() |
| data = self.server.handler_instance.get_data() |
| self.assertEqual(data, b"abcdef1234") |
| |
| @requires_headers_trailers |
| @unittest.skipUnless(hasattr(os, 'SF_NODISKIO'), |
| 'test needs os.SF_NODISKIO') |
| def test_flags(self): |
| try: |
| os.sendfile(self.sockno, self.fileno, 0, 4096, |
| flags=os.SF_NODISKIO) |
| except OSError as err: |
| if err.errno not in (errno.EBUSY, errno.EAGAIN): |
| raise |
| |
| |
| def supports_extended_attributes(): |
| if not hasattr(os, "setxattr"): |
| return False |
| try: |
| with open(support.TESTFN, "wb") as fp: |
| try: |
| os.setxattr(fp.fileno(), b"user.test", b"") |
| except OSError: |
| return False |
| finally: |
| support.unlink(support.TESTFN) |
| # Kernels < 2.6.39 don't respect setxattr flags. |
| kernel_version = platform.release() |
| m = re.match("2.6.(\d{1,2})", kernel_version) |
| return m is None or int(m.group(1)) >= 39 |
| |
| |
| @unittest.skipUnless(supports_extended_attributes(), |
| "no non-broken extended attribute support") |
| class ExtendedAttributeTests(unittest.TestCase): |
| |
| def tearDown(self): |
| support.unlink(support.TESTFN) |
| |
| def _check_xattrs_str(self, s, getxattr, setxattr, removexattr, listxattr, **kwargs): |
| fn = support.TESTFN |
| open(fn, "wb").close() |
| with self.assertRaises(OSError) as cm: |
| getxattr(fn, s("user.test"), **kwargs) |
| self.assertEqual(cm.exception.errno, errno.ENODATA) |
| init_xattr = listxattr(fn) |
| self.assertIsInstance(init_xattr, list) |
| setxattr(fn, s("user.test"), b"", **kwargs) |
| xattr = set(init_xattr) |
| xattr.add("user.test") |
| self.assertEqual(set(listxattr(fn)), xattr) |
| self.assertEqual(getxattr(fn, b"user.test", **kwargs), b"") |
| setxattr(fn, s("user.test"), b"hello", os.XATTR_REPLACE, **kwargs) |
| self.assertEqual(getxattr(fn, b"user.test", **kwargs), b"hello") |
| with self.assertRaises(OSError) as cm: |
| setxattr(fn, s("user.test"), b"bye", os.XATTR_CREATE, **kwargs) |
| self.assertEqual(cm.exception.errno, errno.EEXIST) |
| with self.assertRaises(OSError) as cm: |
| setxattr(fn, s("user.test2"), b"bye", os.XATTR_REPLACE, **kwargs) |
| self.assertEqual(cm.exception.errno, errno.ENODATA) |
| setxattr(fn, s("user.test2"), b"foo", os.XATTR_CREATE, **kwargs) |
| xattr.add("user.test2") |
| self.assertEqual(set(listxattr(fn)), xattr) |
| removexattr(fn, s("user.test"), **kwargs) |
| with self.assertRaises(OSError) as cm: |
| getxattr(fn, s("user.test"), **kwargs) |
| self.assertEqual(cm.exception.errno, errno.ENODATA) |
| xattr.remove("user.test") |
| self.assertEqual(set(listxattr(fn)), xattr) |
| self.assertEqual(getxattr(fn, s("user.test2"), **kwargs), b"foo") |
| setxattr(fn, s("user.test"), b"a"*1024, **kwargs) |
| self.assertEqual(getxattr(fn, s("user.test"), **kwargs), b"a"*1024) |
| removexattr(fn, s("user.test"), **kwargs) |
| many = sorted("user.test{}".format(i) for i in range(100)) |
| for thing in many: |
| setxattr(fn, thing, b"x", **kwargs) |
| self.assertEqual(set(listxattr(fn)), set(init_xattr) | set(many)) |
| |
| def _check_xattrs(self, *args, **kwargs): |
| def make_bytes(s): |
| return bytes(s, "ascii") |
| self._check_xattrs_str(str, *args, **kwargs) |
| support.unlink(support.TESTFN) |
| self._check_xattrs_str(make_bytes, *args, **kwargs) |
| |
| def test_simple(self): |
| self._check_xattrs(os.getxattr, os.setxattr, os.removexattr, |
| os.listxattr) |
| |
| def test_lpath(self): |
| self._check_xattrs(os.getxattr, os.setxattr, os.removexattr, |
| os.listxattr, follow_symlinks=False) |
| |
| def test_fds(self): |
| def getxattr(path, *args): |
| with open(path, "rb") as fp: |
| return os.getxattr(fp.fileno(), *args) |
| def setxattr(path, *args): |
| with open(path, "wb") as fp: |
| os.setxattr(fp.fileno(), *args) |
| def removexattr(path, *args): |
| with open(path, "wb") as fp: |
| os.removexattr(fp.fileno(), *args) |
| def listxattr(path, *args): |
| with open(path, "rb") as fp: |
| return os.listxattr(fp.fileno(), *args) |
| self._check_xattrs(getxattr, setxattr, removexattr, listxattr) |
| |
| |
| @unittest.skipUnless(sys.platform == "win32", "Win32 specific tests") |
| class Win32DeprecatedBytesAPI(unittest.TestCase): |
| def test_deprecated(self): |
| import nt |
| filename = os.fsencode(support.TESTFN) |
| with warnings.catch_warnings(): |
| warnings.simplefilter("error", DeprecationWarning) |
| for func, *args in ( |
| (nt._getfullpathname, filename), |
| (nt._isdir, filename), |
| (os.access, filename, os.R_OK), |
| (os.chdir, filename), |
| (os.chmod, filename, 0o777), |
| (os.getcwdb,), |
| (os.link, filename, filename), |
| (os.listdir, filename), |
| (os.lstat, filename), |
| (os.mkdir, filename), |
| (os.open, filename, os.O_RDONLY), |
| (os.rename, filename, filename), |
| (os.rmdir, filename), |
| (os.startfile, filename), |
| (os.stat, filename), |
| (os.unlink, filename), |
| (os.utime, filename), |
| ): |
| self.assertRaises(DeprecationWarning, func, *args) |
| |
| @support.skip_unless_symlink |
| def test_symlink(self): |
| filename = os.fsencode(support.TESTFN) |
| with warnings.catch_warnings(): |
| warnings.simplefilter("error", DeprecationWarning) |
| self.assertRaises(DeprecationWarning, |
| os.symlink, filename, filename) |
| |
| |
| @unittest.skipUnless(hasattr(os, 'get_terminal_size'), "requires os.get_terminal_size") |
| class TermsizeTests(unittest.TestCase): |
| def test_does_not_crash(self): |
| """Check if get_terminal_size() returns a meaningful value. |
| |
| There's no easy portable way to actually check the size of the |
| terminal, so let's check if it returns something sensible instead. |
| """ |
| try: |
| size = os.get_terminal_size() |
| except OSError as e: |
| if sys.platform == "win32" or e.errno in (errno.EINVAL, errno.ENOTTY): |
| # Under win32 a generic OSError can be thrown if the |
| # handle cannot be retrieved |
| self.skipTest("failed to query terminal size") |
| raise |
| |
| self.assertGreaterEqual(size.columns, 0) |
| self.assertGreaterEqual(size.lines, 0) |
| |
| def test_stty_match(self): |
| """Check if stty returns the same results |
| |
| stty actually tests stdin, so get_terminal_size is invoked on |
| stdin explicitly. If stty succeeded, then get_terminal_size() |
| should work too. |
| """ |
| try: |
| size = subprocess.check_output(['stty', 'size']).decode().split() |
| except (FileNotFoundError, subprocess.CalledProcessError): |
| self.skipTest("stty invocation failed") |
| expected = (int(size[1]), int(size[0])) # reversed order |
| |
| try: |
| actual = os.get_terminal_size(sys.__stdin__.fileno()) |
| except OSError as e: |
| if sys.platform == "win32" or e.errno in (errno.EINVAL, errno.ENOTTY): |
| # Under win32 a generic OSError can be thrown if the |
| # handle cannot be retrieved |
| self.skipTest("failed to query terminal size") |
| raise |
| self.assertEqual(expected, actual) |
| |
| |
| class OSErrorTests(unittest.TestCase): |
| def setUp(self): |
| class Str(str): |
| pass |
| |
| self.bytes_filenames = [] |
| self.unicode_filenames = [] |
| if support.TESTFN_UNENCODABLE is not None: |
| decoded = support.TESTFN_UNENCODABLE |
| else: |
| decoded = support.TESTFN |
| self.unicode_filenames.append(decoded) |
| self.unicode_filenames.append(Str(decoded)) |
| if support.TESTFN_UNDECODABLE is not None: |
| encoded = support.TESTFN_UNDECODABLE |
| else: |
| encoded = os.fsencode(support.TESTFN) |
| self.bytes_filenames.append(encoded) |
| self.bytes_filenames.append(memoryview(encoded)) |
| |
| self.filenames = self.bytes_filenames + self.unicode_filenames |
| |
| def test_oserror_filename(self): |
| funcs = [ |
| (self.filenames, os.chdir,), |
| (self.filenames, os.chmod, 0o777), |
| (self.filenames, os.lstat,), |
| (self.filenames, os.open, os.O_RDONLY), |
| (self.filenames, os.rmdir,), |
| (self.filenames, os.stat,), |
| (self.filenames, os.unlink,), |
| ] |
| if sys.platform == "win32": |
| funcs.extend(( |
| (self.bytes_filenames, os.rename, b"dst"), |
| (self.bytes_filenames, os.replace, b"dst"), |
| (self.unicode_filenames, os.rename, "dst"), |
| (self.unicode_filenames, os.replace, "dst"), |
| # Issue #16414: Don't test undecodable names with listdir() |
| # because of a Windows bug. |
| # |
| # With the ANSI code page 932, os.listdir(b'\xe7') return an |
| # empty list (instead of failing), whereas os.listdir(b'\xff') |
| # raises a FileNotFoundError. It looks like a Windows bug: |
| # b'\xe7' directory does not exist, FindFirstFileA(b'\xe7') |
| # fails with ERROR_FILE_NOT_FOUND (2), instead of |
| # ERROR_PATH_NOT_FOUND (3). |
| (self.unicode_filenames, os.listdir,), |
| )) |
| else: |
| funcs.extend(( |
| (self.filenames, os.listdir,), |
| (self.filenames, os.rename, "dst"), |
| (self.filenames, os.replace, "dst"), |
| )) |
| if hasattr(os, "chown"): |
| funcs.append((self.filenames, os.chown, 0, 0)) |
| if hasattr(os, "lchown"): |
| funcs.append((self.filenames, os.lchown, 0, 0)) |
| if hasattr(os, "truncate"): |
| funcs.append((self.filenames, os.truncate, 0)) |
| if hasattr(os, "chflags"): |
| funcs.append((self.filenames, os.chflags, 0)) |
| if hasattr(os, "lchflags"): |
| funcs.append((self.filenames, os.lchflags, 0)) |
| if hasattr(os, "chroot"): |
| funcs.append((self.filenames, os.chroot,)) |
| if hasattr(os, "link"): |
| if sys.platform == "win32": |
| funcs.append((self.bytes_filenames, os.link, b"dst")) |
| funcs.append((self.unicode_filenames, os.link, "dst")) |
| else: |
| funcs.append((self.filenames, os.link, "dst")) |
| if hasattr(os, "listxattr"): |
| funcs.extend(( |
| (self.filenames, os.listxattr,), |
| (self.filenames, os.getxattr, "user.test"), |
| (self.filenames, os.setxattr, "user.test", b'user'), |
| (self.filenames, os.removexattr, "user.test"), |
| )) |
| if hasattr(os, "lchmod"): |
| funcs.append((self.filenames, os.lchmod, 0o777)) |
| if hasattr(os, "readlink"): |
| if sys.platform == "win32": |
| funcs.append((self.unicode_filenames, os.readlink,)) |
| else: |
| funcs.append((self.filenames, os.readlink,)) |
| |
| for filenames, func, *func_args in funcs: |
| for name in filenames: |
| try: |
| func(name, *func_args) |
| except OSError as err: |
| self.assertIs(err.filename, name) |
| else: |
| self.fail("No exception thrown by {}".format(func)) |
| |
| class CPUCountTests(unittest.TestCase): |
| def test_cpu_count(self): |
| cpus = os.cpu_count() |
| if cpus is not None: |
| self.assertIsInstance(cpus, int) |
| self.assertGreater(cpus, 0) |
| else: |
| self.skipTest("Could not determine the number of CPUs") |
| |
| |
| class FDInheritanceTests(unittest.TestCase): |
| def test_get_set_inheritable(self): |
| fd = os.open(__file__, os.O_RDONLY) |
| self.addCleanup(os.close, fd) |
| self.assertEqual(os.get_inheritable(fd), False) |
| |
| os.set_inheritable(fd, True) |
| self.assertEqual(os.get_inheritable(fd), True) |
| |
| @unittest.skipIf(fcntl is None, "need fcntl") |
| def test_get_inheritable_cloexec(self): |
| fd = os.open(__file__, os.O_RDONLY) |
| self.addCleanup(os.close, fd) |
| self.assertEqual(os.get_inheritable(fd), False) |
| |
| # clear FD_CLOEXEC flag |
| flags = fcntl.fcntl(fd, fcntl.F_GETFD) |
| flags &= ~fcntl.FD_CLOEXEC |
| fcntl.fcntl(fd, fcntl.F_SETFD, flags) |
| |
| self.assertEqual(os.get_inheritable(fd), True) |
| |
| @unittest.skipIf(fcntl is None, "need fcntl") |
| def test_set_inheritable_cloexec(self): |
| fd = os.open(__file__, os.O_RDONLY) |
| self.addCleanup(os.close, fd) |
| self.assertEqual(fcntl.fcntl(fd, fcntl.F_GETFD) & fcntl.FD_CLOEXEC, |
| fcntl.FD_CLOEXEC) |
| |
| os.set_inheritable(fd, True) |
| self.assertEqual(fcntl.fcntl(fd, fcntl.F_GETFD) & fcntl.FD_CLOEXEC, |
| 0) |
| |
| def test_open(self): |
| fd = os.open(__file__, os.O_RDONLY) |
| self.addCleanup(os.close, fd) |
| self.assertEqual(os.get_inheritable(fd), False) |
| |
| @unittest.skipUnless(hasattr(os, 'pipe'), "need os.pipe()") |
| def test_pipe(self): |
| rfd, wfd = os.pipe() |
| self.addCleanup(os.close, rfd) |
| self.addCleanup(os.close, wfd) |
| self.assertEqual(os.get_inheritable(rfd), False) |
| self.assertEqual(os.get_inheritable(wfd), False) |
| |
| def test_dup(self): |
| fd1 = os.open(__file__, os.O_RDONLY) |
| self.addCleanup(os.close, fd1) |
| |
| fd2 = os.dup(fd1) |
| self.addCleanup(os.close, fd2) |
| self.assertEqual(os.get_inheritable(fd2), False) |
| |
| @unittest.skipUnless(hasattr(os, 'dup2'), "need os.dup2()") |
| def test_dup2(self): |
| fd = os.open(__file__, os.O_RDONLY) |
| self.addCleanup(os.close, fd) |
| |
| # inheritable by default |
| fd2 = os.open(__file__, os.O_RDONLY) |
| try: |
| os.dup2(fd, fd2) |
| self.assertEqual(os.get_inheritable(fd2), True) |
| finally: |
| os.close(fd2) |
| |
| # force non-inheritable |
| fd3 = os.open(__file__, os.O_RDONLY) |
| try: |
| os.dup2(fd, fd3, inheritable=False) |
| self.assertEqual(os.get_inheritable(fd3), False) |
| finally: |
| os.close(fd3) |
| |
| @unittest.skipUnless(hasattr(os, 'openpty'), "need os.openpty()") |
| def test_openpty(self): |
| master_fd, slave_fd = os.openpty() |
| self.addCleanup(os.close, master_fd) |
| self.addCleanup(os.close, slave_fd) |
| self.assertEqual(os.get_inheritable(master_fd), False) |
| self.assertEqual(os.get_inheritable(slave_fd), False) |
| |
| |
| @support.reap_threads |
| def test_main(): |
| support.run_unittest( |
| FileTests, |
| StatAttributeTests, |
| UtimeTests, |
| EnvironTests, |
| WalkTests, |
| FwalkTests, |
| MakedirTests, |
| DevNullTests, |
| URandomTests, |
| URandomFDTests, |
| ExecTests, |
| Win32ErrorTests, |
| TestInvalidFD, |
| PosixUidGidTests, |
| Pep383Tests, |
| Win32KillTests, |
| Win32ListdirTests, |
| Win32SymlinkTests, |
| NonLocalSymlinkTests, |
| FSEncodingTests, |
| DeviceEncodingTests, |
| PidTests, |
| LoginTests, |
| LinkTests, |
| TestSendfile, |
| ProgramPriorityTests, |
| ExtendedAttributeTests, |
| Win32DeprecatedBytesAPI, |
| TermsizeTests, |
| OSErrorTests, |
| RemoveDirsTests, |
| CPUCountTests, |
| FDInheritanceTests, |
| ) |
| |
| if __name__ == "__main__": |
| test_main() |