# Top-level Makefile for Python
# 
# As distributed, this file is called Makefile.pre.in; it is processed
# into the real Makefile by running the script ./configure, which
# replaces things like @spam@ with values appropriate for your system.
# This means that if you edit Makefile, your changes get lost the next
# time you run the configure script.  Ideally, you can do:
# 
#	./configure
#	make
#	make test
#	make install
# 
# If you have a previous version of Python installed that you don't
# want to overwrite, you can use "make altinstall" instead of "make
# install".  This changes the install procedure so it installs the
# Python binary as "python<version>".  The libraries and include files
# are always installed in a subdirectory called "python<version>".
# "make altinstall" does not install the manual page.  If you want to
# make this installation the "official" installation but want to keep
# the old binary around "just in case", rename the installed python
# binary to "python<oldversion>" before running "make install".
# (This only works between different versions, e.g. 1.3 and 1.4 --
# different betas of the same version will overwrite each other in
# installation unless you override the VERSION Make variable.)
# 
# In fact, "make install" or "make bininstall" installs the binary
# as python<version> and makes a hard link to python, so when
# installing a new version in the future, nothing of the current
# version will be lost (except for the man page).
# 
# See also the section "Build instructions" in the README file.

# === Variables set by makesetup ===

MODOBJS=        _MODOBJS_
MODLIBS=        _MODLIBS_

# === Variables set by configure
VERSION=	@VERSION@
srcdir=		@srcdir@
VPATH=		@srcdir@

CC=		@CC@
CXX=		@CXX@
LINKCC=		@LINKCC@
AR=		@AR@
RANLIB=		@RANLIB@

# Shell used by make (some versions default to the login shell, which is bad)
SHELL=		/bin/sh

# Use this to make a link between python$(VERSION) and python in $(BINDIR)
LN=		@LN@

# Portable install script (configure doesn't always guess right)
INSTALL=	@INSTALL@
INSTALL_PROGRAM=@INSTALL_PROGRAM@
INSTALL_DATA=	@INSTALL_DATA@
# Shared libraries must be installed with executable mode on some systems;
# rather than figuring out exactly which, we always give them executable mode.
# Also, making them read-only seems to be a good idea...
INSTALL_SHARED= ${INSTALL} -m 555

MAKESETUP=      $(srcdir)/Modules/makesetup

# Compiler options
OPT=		@OPT@
DEFS=		@DEFS@
CFLAGS=		$(OPT) -I. -I$(srcdir)/Include $(DEFS)
LDFLAGS=	@LDFLAGS@
LDLAST=		@LDLAST@
SGI_ABI=	@SGI_ABI@
CCSHARED=	@CCSHARED@
LINKFORSHARED=	@LINKFORSHARED@
# Extra C flags added for building the interpreter object files.
CFLAGSFORSHARED=@CFLAGSFORSHARED@
# C flags used for building the interpreter object files
PY_CFLAGS=	$(CFLAGS) $(CFLAGSFORSHARED)


# Machine-dependent subdirectories
MACHDEP=	@MACHDEP@

# Install prefix for architecture-independent files
prefix=		@prefix@

# Install prefix for architecture-dependent files
exec_prefix=	@exec_prefix@

# Expanded directories
BINDIR=		$(exec_prefix)/bin
LIBDIR=		$(exec_prefix)/lib
MANDIR=		$(prefix)/man
INCLUDEDIR=	$(prefix)/include
CONFINCLUDEDIR=	$(exec_prefix)/include
SCRIPTDIR=	$(prefix)/lib

# Detailed destination directories
BINLIBDEST=	$(LIBDIR)/python$(VERSION)
LIBDEST=	$(SCRIPTDIR)/python$(VERSION)
INCLUDEPY=	$(INCLUDEDIR)/python$(VERSION)
CONFINCLUDEPY=	$(CONFINCLUDEDIR)/python$(VERSION)
LIBP=		$(LIBDIR)/python$(VERSION)

# Symbols used for using shared libraries
SO=		@SO@
LDSHARED=	@LDSHARED@
DESTSHARED=	$(BINLIBDEST)/lib-dynload

# Executable suffix (.exe on Windows and Mac OS X)
EXEEXT=		@EXEEXT@

# Modes for directories, executables and data files created by the
# install process.  Default to user-only-writable for all file types.
DIRMODE=	755
EXEMODE=	755
FILEMODE=	644

# --with-PACKAGE options for configure script
# e.g. --with-readline --with-svr5 --with-solaris --with-thread
# (see README for an explanation)
WITH=		


# Subdirectories with code
SRCDIRS= 	@SRCDIRS@

# Other subdirectories
SUBDIRSTOO=	Include Lib Misc Demo

# Files and directories to be distributed
CONFIGFILES=	configure configure.in acconfig.h config.h.in Makefile.pre.in
DISTFILES=	README ChangeLog $(CONFIGFILES)
DISTDIRS=	$(SUBDIRS) $(SUBDIRSTOO) Ext-dummy
DIST=		$(DISTFILES) $(DISTDIRS)


LIBRARY=	@LIBRARY@
LDLIBRARY=      @LDLIBRARY@
DLLLIBRARY=	@DLLLIBRARY@


LIBS=		@LIBS@
LIBM=		@LIBM@
LIBC=		@LIBC@
SYSLIBS=	$(LIBM) $(LIBC)

MAINOBJ=	@MAINOBJ@
LIBOBJS=	@LIBOBJS@
DLINCLDIR=	@DLINCLDIR@
DYNLOADFILE=	@DYNLOADFILE@

PYTHON=		python$(EXEEXT)

# === Definitions added by makesetup ===


##########################################################################
# Modules
MODULE_OBJS=	\
		Modules/config.o \
		Modules/getpath.o \
		Modules/main.o

# Used of signalmodule.o is not available
SIGNAL_OBJS=	@SIGNAL_OBJS@


##########################################################################
# Grammar
GRAMMAR_H=	$(srcdir)/Include/graminit.h
GRAMMAR_C=	$(srcdir)/Python/graminit.c
GRAMMAR_INPUT=	$(srcdir)/Grammar/Grammar


##########################################################################
# Parser
PGEN=		Parser/pgen$(EXEEXT)

POBJS=		\
		Parser/acceler.o \
		Parser/grammar1.o \
		Parser/listnode.o \
		Parser/node.o \
		Parser/parser.o \
		Parser/parsetok.o \
		Parser/tokenizer.o \
		Parser/bitset.o \
		Parser/metagrammar.o

PARSER_OBJS=	$(POBJS) Parser/myreadline.o

PGOBJS=		\
		Parser/firstsets.o \
		Parser/grammar.o \
		Parser/pgen.o \
		Parser/printgrammar.o \
		Parser/pgenmain.o

PGENOBJS=	$(PGENMAIN) $(POBJS) $(PGOBJS)


##########################################################################
# Python
PYTHON_OBJS=	\
		Python/bltinmodule.o \
		Python/exceptions.o \
		Python/ceval.o \
		Python/compile.o \
		Python/codecs.o \
		Python/errors.o \
		Python/frozen.o \
		Python/frozenmain.o \
		Python/getargs.o \
		Python/getcompiler.o \
		Python/getcopyright.o \
		Python/getmtime.o \
		Python/getplatform.o \
		Python/getversion.o \
		Python/graminit.o \
		Python/import.o \
		Python/importdl.o \
		Python/marshal.o \
		Python/modsupport.o \
		Python/mystrtoul.o \
		Python/pyfpe.o \
		Python/pystate.o \
		Python/pythonrun.o \
		Python/structmember.o \
		Python/sysmodule.o \
		Python/traceback.o \
		Python/getopt.o \
		Python/$(DYNLOADFILE) \
		$(LIBOBJS)


##########################################################################
# Objects
OBJECT_OBJS=	\
		Objects/abstract.o \
		Objects/bufferobject.o \
		Objects/cellobject.o \
		Objects/classobject.o \
		Objects/cobject.o \
		Objects/complexobject.o \
		Objects/fileobject.o \
		Objects/floatobject.o \
		Objects/frameobject.o \
		Objects/funcobject.o \
		Objects/intobject.o \
		Objects/listobject.o \
		Objects/longobject.o \
		Objects/dictobject.o \
		Objects/methodobject.o \
		Objects/moduleobject.o \
		Objects/object.o \
		Objects/rangeobject.o \
		Objects/sliceobject.o \
		Objects/stringobject.o \
		Objects/tupleobject.o \
		Objects/typeobject.o \
		Objects/unicodeobject.o \
		Objects/unicodectype.o


##########################################################################
# objects that get linked into the Python library
LIBRARY_OBJS=	\
		Modules/getbuildinfo.o \
		$(PARSER_OBJS) \
		$(OBJECT_OBJS) \
		$(PYTHON_OBJS) \
		$(MODULE_OBJS) \
		$(SIGNAL_OBJS) \
		$(MODOBJS)

#########################################################################
# Rules

# Default target
all:		$(PYTHON) oldsharedmods sharedmods 

# Build the interpreter
$(PYTHON):	$(MAINOBJ) $(LDLIBRARY)
		$(LINKCC) $(LDFLAGS) $(LINKFORSHARED) -o $@ $(MAINOBJ) \
			$(LDLIBRARY) $(LIBS) $(MODLIBS) $(SYSLIBS) $(LDLAST)

platform: $(PYTHON)
	./$(PYTHON) -c 'import sys ; from distutils.util import get_platform ; print get_platform()+"-"+sys.version[0:3]' >platform


# Build the shared modules
sharedmods: $(PYTHON)
	./$(PYTHON) $(srcdir)/setup.py build

# buildno should really depend on something like LIBRARY_SRC
buildno: $(PARSER_OBJS) \
		$(OBJECT_OBJS) \
		$(PYTHON_OBJS) \
		$(MODULE_OBJS) \
		$(SIGNAL_OBJS) \
		$(MODOBJS) \
		$(srcdir)/Modules/getbuildinfo.c
	if test -f buildno; then \
		expr `cat buildno` + 1 >buildno1; \
		mv -f buildno1 buildno; \
	else echo 1 >buildno; fi

# Build static library
$(LIBRARY): $(LIBRARY_OBJS)
	-rm -f $@
	# avoid long command lines, same as LIBRARY_OBJS
	$(AR) cr $@ Modules/getbuildinfo.o
	$(AR) cr $@ $(PARSER_OBJS)
	$(AR) cr $@ $(OBJECT_OBJS)
	$(AR) cr $@ $(PYTHON_OBJS)
	$(AR) cr $@ $(MODULE_OBJS) $(SIGNAL_OBJS)
	$(AR) cr $@ $(MODOBJS)
	$(RANLIB) $@

# This rule is only here for DG/UX and BeOS!!!
libpython$(VERSION).so:	$(LIBRARY)
	case `uname -s | tr -d '/ ' | tr '[A-Z]' '[a-z]'` in \
	*dgux*) \
	    test -d dgux || mkdir dgux; \
	    (cd dgux;ar x ../$^;ld -G -o ../$@ * ); \
	    /bin/rm -rf ./dgux \
	    ;; \
	beos) \
	    $(srcdir)/BeOS/ar-fake so $(LIBRARY) $@ \
	    ;; \
	esac

# This rule is here for OPENSTEP/Rhapsody/MacOSX
libpython$(VERSION).dylib: $(LIBRARY)
	libtool -o $(LDLIBRARY) -dynamic $(OTHER_LIBTOOL_OPT) $(LIBRARY) \
		-framework System @LIBTOOL_CRUFT@ 

# This rule builds the Cygwin Python DLL
libpython$(VERSION).dll.a: $(LIBRARY_OBJS)
	dlltool --export-all --output-def $@ $^
	$(LDSHARED) -Wl,--out-implib=$@ -o $(DLLLIBRARY) $^ \
		$(LIBS) $(MODLIBS) $(SYSLIBS)


oldsharedmods: $(SHAREDMODS)


Makefile Modules/config.c: Makefile.pre \
				$(srcdir)/Modules/config.c.in \
				$(MAKESETUP) \
				Modules/Setup.config \
				Modules/Setup \
				Modules/Setup.local
	$(SHELL) $(MAKESETUP) -c $(srcdir)/Modules/config.c.in \
				-s Modules \
				Modules/Setup.config \
				Modules/Setup.local \
				Modules/Setup
	@mv config.c Modules
	@echo "The Makefile was updated, you may need to re-run make."


Modules/Setup: $(srcdir)/Modules/Setup.dist
	@if test -f Modules/Setup; then \
		echo "-----------------------------------------------"; \
		echo "Modules/Setup.dist is newer than Modules/Setup;"; \
		echo "check to make sure you have all the updates you"; \
		echo "need in your Modules/Setup file."; \
		echo "-----------------------------------------------"; \
	fi

############################################################################
# Special rules for object files

Modules/getbuildinfo.o: $(srcdir)/Modules/getbuildinfo.c buildno
	$(CC) -c $(PY_CFLAGS) -DBUILD=`cat buildno` -o $@ $(srcdir)/Modules/getbuildinfo.c

Modules/getpath.o: $(srcdir)/Modules/getpath.c Makefile
	$(CC) -c $(PY_CFLAGS) -DPYTHONPATH='"$(PYTHONPATH)"' \
		-DPREFIX='"$(prefix)"' \
		-DEXEC_PREFIX='"$(exec_prefix)"' \
		-DVERSION='"$(VERSION)"' \
		-DVPATH='"$(VPATH)"' \
		-o $@ $(srcdir)/Modules/getpath.c

Modules/ccpython.o: $(srcdir)/Modules/ccpython.cc
	$(CXX) -c $(PY_CFLAGS) -o $@ $(srcdir)/Modules/ccpython.cc


$(GRAMMAR_H) $(GRAMMAR_C): $(PGEN) $(GRAMMAR_INPUT)
		$(PGEN) $(GRAMMAR_INPUT)
		mv graminit.h $(GRAMMAR_H)
		mv graminit.c $(GRAMMAR_C)

$(PGEN):	$(PGENOBJS)
		$(CC) $(OPT) $(PGENOBJS) $(LIBS) -o $(PGEN)

Parser/grammar.o:	$(srcdir)/Parser/grammar.c \
				$(srcdir)/Parser/assert.h \
				$(srcdir)/Include/token.h \
				$(srcdir)/Include/grammar.h
Parser/metagrammar.o:	$(srcdir)/Parser/metagrammar.c


Python/getplatform.o: $(srcdir)/Python/getplatform.c
		$(CC) -c $(CFLAGS) -DPLATFORM='"$(MACHDEP)"' -o $@ $(srcdir)/Python/getplatform.c

Python/importdl.o: $(srcdir)/Python/importdl.c
		$(CC) -c $(CFLAGS) -I$(DLINCLDIR) -o $@ $(srcdir)/Python/importdl.c


Objects/unicodectype.o:	$(srcdir)/Objects/unicodectype.c \
				$(srcdir)/Objects/unicodetype_db.h


############################################################################
# Header files

PYTHON_HEADERS= \
		Include/Python.h \
		config.h \
		Include/patchlevel.h \
		Include/pyport.h \
		Include/pymem.h \
		Include/object.h \
		Include/objimpl.h \
		Include/compile.h \
		Include/symtable.h \
		Include/pydebug.h \
		Include/unicodeobject.h \
		Include/intobject.h \
		Include/longobject.h \
		Include/floatobject.h \
		Include/complexobject.h \
		Include/rangeobject.h \
		Include/stringobject.h \
		Include/bufferobject.h \
		Include/tupleobject.h \
		Include/listobject.h \
		Include/dictobject.h \
		Include/methodobject.h \
		Include/moduleobject.h \
		Include/funcobject.h \
		Include/classobject.h \
		Include/fileobject.h \
		Include/cobject.h \
		Include/traceback.h \
		Include/sliceobject.h \
		Include/codecs.h \
		Include/pyerrors.h \
		Include/pystate.h \
		Include/modsupport.h \
		Include/ceval.h \
		Include/pythonrun.h \
		Include/sysmodule.h \
		Include/intrcheck.h \
		Include/import.h \
		Include/abstract.h \
		Include/pyfpe.h

$(LIBRARY_OBJS) $(MODOBJS) $(MAINOBJ): $(PYTHON_HEADERS)


######################################################################

# Test the interpreter (twice, once without .pyc files, once with)
TESTOPTS=	-l
TESTPROG=	$(srcdir)/Lib/test/regrtest.py
TESTPYTHON=	./$(PYTHON) -tt
test:		all platform
		-rm -f $(srcdir)/Lib/test/*.py[co]
		-PYTHONPATH= $(TESTPYTHON) $(TESTPROG) $(TESTOPTS)
		PYTHONPATH= $(TESTPYTHON) $(TESTPROG) $(TESTOPTS)

QUICKTESTOPTS=	$(TESTOPTS) -x test_thread test_signal test_strftime \
		test_unicodedata test_re test_sre test_select test_poll \
		test_linuxaudiodev test_sunaudiodev
quicktest:	all platform
		-rm -f $(srcdir)/Lib/test/*.py[co]
		-PYTHONPATH= $(TESTPYTHON) $(TESTPROG) $(QUICKTESTOPTS)
		PYTHONPATH= $(TESTPYTHON) $(TESTPROG) $(QUICKTESTOPTS)

# Install everything
install:	altinstall bininstall maninstall

# Install almost everything without disturbing previous versions
altinstall:	altbininstall libinstall inclinstall libainstall \
                sharedinstall oldsharedinstall 

# Install shared libraries enabled by Setup
DESTDIRS=	$(exec_prefix) $(LIBDIR) $(BINLIBDEST) $(DESTSHARED)

oldsharedinstall: $(DESTSHARED) $(SHAREDMODS)
		@for i in X $(SHAREDMODS); do \
		  if test $$i != X; then \
		    echo $(INSTALL_SHARED) $$i $(DESTSHARED)/`basename $$i`; \
		    $(INSTALL_SHARED) $$i $(DESTSHARED)/`basename $$i`; \
		  fi; \
		done

$(DESTSHARED): 
		@for i in $(DESTDIRS); \
		do \
			if test ! -d $$i; then \
				echo "Creating directory $$i"; \
				$(INSTALL) -d 755 $$i; \
			else    true; \
			fi; \
		done


# Install the interpreter (by creating a hard link to python$(VERSION))
bininstall:	altbininstall
	-if test -f $(BINDIR)/$(PYTHON); \
	then rm -f $(BINDIR)/$(PYTHON); \
	else true; \
	fi
	(cd $(BINDIR); $(LN) python$(VERSION)$(EXEEXT) python$(EXEEXT))

# Install the interpreter with $(VERSION) affixed
# This goes into $(exec_prefix)
altbininstall:	$(PYTHON)
	@for i in $(BINDIR); \
	do \
		if test ! -d $$i; then \
			echo "Creating directory $$i"; \
			$(INSTALL) -d $(DIRMODE) $$i; \
		else	true; \
		fi; \
	done
	$(INSTALL_PROGRAM) $(PYTHON) $(BINDIR)/python$(VERSION)$(EXEEXT)
	if test -f libpython$(VERSION).so; then \
		$(INSTALL_DATA) libpython$(VERSION).so $(LIBDIR); \
	else	true; \
	fi
	if test -f "$(DLLLIBRARY)"; then \
		$(INSTALL_DATA) $(DLLLIBRARY) $(BINDIR); \
	else	true; \
	fi

# Install the manual page
maninstall:
	@for i in $(MANDIR) $(MANDIR)/man1; \
	do \
		if test ! -d $$i; then \
			echo "Creating directory $$i"; \
			$(INSTALL) -d $(DIRMODE) $$i; \
		else	true; \
		fi; \
	done
	$(INSTALL_DATA) $(srcdir)/Misc/python.man \
		$(MANDIR)/man1/python.1

# Install the library
PLATDIR=	plat-$(MACHDEP)
MACHDEPS=	$(PLATDIR)
XMLLIBSUBDIRS=  xml xml/dom xml/parsers xml/sax
LIBSUBDIRS=	lib-old lib-tk site-packages test test/output encodings \
		distutils distutils/command $(XMLLIBSUBDIRS) curses $(MACHDEPS)
libinstall:	python $(srcdir)/Lib/$(PLATDIR)
	@for i in $(SCRIPTDIR) $(LIBDEST); \
	do \
		if test ! -d $$i; then \
			echo "Creating directory $$i"; \
			$(INSTALL) -d $(DIRMODE) $$i; \
		else	true; \
		fi; \
	done
	@for d in $(LIBSUBDIRS); \
	do \
		a=$(srcdir)/Lib/$$d; \
		if test ! -d $$a; then continue; else true; fi; \
		b=$(LIBDEST)/$$d; \
		if test ! -d $$b; then \
			echo "Creating directory $$b"; \
			$(INSTALL) -d $(DIRMODE) $$b; \
		else	true; \
		fi; \
	done
	@for i in $(srcdir)/Lib/*.py $(srcdir)/Lib/*.doc; \
	do \
		if test -x $$i; then \
			$(INSTALL_PROGRAM) $$i $(LIBDEST); \
			echo $(INSTALL_PROGRAM) $$i $(LIBDEST); \
		else \
			$(INSTALL_DATA) $$i $(LIBDEST); \
			echo $(INSTALL_DATA) $$i $(LIBDEST); \
		fi; \
	done
	@for d in $(LIBSUBDIRS); \
	do \
		a=$(srcdir)/Lib/$$d; \
		if test ! -d $$a; then continue; else true; fi; \
		b=$(LIBDEST)/$$d; \
		for i in $$a/*; \
		do \
			case $$i in \
			*CVS) ;; \
			*.py[co]) ;; \
			*.orig) ;; \
			*~) ;; \
			*) \
				if test -d $$i; then continue; fi; \
				if test -x $$i; then \
				    echo $(INSTALL_PROGRAM) $$i $$b; \
				    $(INSTALL_PROGRAM) $$i $$b; \
				else \
				    echo $(INSTALL_DATA) $$i $$b; \
				    $(INSTALL_DATA) $$i $$b; \
				fi;; \
			esac; \
		done; \
	done
	$(INSTALL_DATA) $(srcdir)/LICENSE $(LIBDEST)/LICENSE.txt
	PYTHONPATH=$(LIBDEST) \
		./$(PYTHON) -tt $(LIBDEST)/compileall.py $(LIBDEST)
	PYTHONPATH=$(LIBDEST) \
		./$(PYTHON) -O $(LIBDEST)/compileall.py $(LIBDEST)

# Create the PLATDIR source directory, if one wasn't distributed..
$(srcdir)/Lib/$(PLATDIR):
	mkdir $(srcdir)/Lib/$(PLATDIR)
	cp $(srcdir)/Lib/plat-generic/regen $(srcdir)/Lib/$(PLATDIR)/regen
	export PATH; PATH="`pwd`:$$PATH"; \
	export PYTHONPATH; PYTHONPATH="`pwd`/Lib"; \
	export EXEEXT; EXEEXT="$(EXEEXT)"; \
	cd $(srcdir)/Lib/$(PLATDIR); ./regen

# Install the include files
INCLDIRSTOMAKE=$(INCLUDEDIR) $(CONFINCLUDEDIR) $(INCLUDEPY) $(CONFINCLUDEPY)
inclinstall:
	@for i in $(INCLDIRSTOMAKE); \
	do \
		if test ! -d $$i; then \
			echo "Creating directory $$i"; \
			$(INSTALL) -d $(DIRMODE) $$i; \
		else	true; \
		fi; \
	done
	@for i in $(srcdir)/Include/*.h; \
	do \
		echo $(INSTALL_DATA) $$i $(INCLUDEPY); \
		$(INSTALL_DATA) $$i $(INCLUDEPY); \
	done
	$(INSTALL_DATA) config.h $(CONFINCLUDEPY)/config.h

# Install the library and miscellaneous stuff needed for extending/embedding
# This goes into $(exec_prefix)
LIBPL=		$(LIBP)/config
libainstall:	all
	@for i in $(LIBDIR) $(LIBP) $(LIBPL); \
	do \
		if test ! -d $$i; then \
			echo "Creating directory $$i"; \
			$(INSTALL) -d $(DIRMODE) $$i; \
		else	true; \
		fi; \
	done
	@if test -d $(LDLIBRARY); then :; else \
		$(INSTALL_DATA) $(LDLIBRARY) $(LIBPL)/$(LDLIBRARY) ; \
		$(RANLIB) $(LIBPL)/$(LDLIBRARY) ; \
	fi
	$(INSTALL_DATA) Modules/config.c $(LIBPL)/config.c
	$(INSTALL_DATA) Modules/python.o $(LIBPL)/python.o
	$(INSTALL_DATA) $(srcdir)/Modules/config.c.in $(LIBPL)/config.c.in
	$(INSTALL_DATA) Makefile $(LIBPL)/Makefile
	$(INSTALL_DATA) Modules/Setup $(LIBPL)/Setup
	$(INSTALL_DATA) Modules/Setup.local $(LIBPL)/Setup.local
	$(INSTALL_DATA) Modules/Setup.config $(LIBPL)/Setup.config
	$(INSTALL_PROGRAM) $(srcdir)/Modules/makesetup $(LIBPL)/makesetup
	$(INSTALL_PROGRAM) $(srcdir)/install-sh $(LIBPL)/install-sh
	$(INSTALL_DATA) $(srcdir)/Misc/Makefile.pre.in $(LIBPL)/Makefile.pre.in
	@if [ -s Modules/python.exp -a \
		"`echo $(MACHDEP) | sed 's/^\(...\).*/\1/'`" = "aix" ]; then \
		echo; echo "Installing support files for building shared extension modules on AIX:"; \
		$(INSTALL_DATA) Modules/python.exp		\
				$(LIBPL)/python.exp;		\
		echo; echo "$(LIBPL)/python.exp";		\
		$(INSTALL_PROGRAM) $(srcdir)/Modules/makexp_aix	\
				$(LIBPL)/makexp_aix;		\
		echo "$(LIBPL)/makexp_aix";			\
		$(INSTALL_PROGRAM) $(srcdir)/Modules/ld_so_aix	\
				$(LIBPL)/ld_so_aix;		\
		echo "$(LIBPL)/ld_so_aix";			\
		echo; echo "See Misc/AIX-NOTES for details.";	\
	else true; \
	fi
	@case "$(MACHDEP)" in beos*) \
		echo; echo "Installing support files for building shared extension modules on BeOS:"; \
		$(INSTALL_DATA) BeOS/README $(LIBPL)/README;	\
		echo; echo "$(LIBPL)/README";			\
		$(INSTALL_DATA) BeOS/README.readline-2.2 $(LIBPL)/README.readline-2.2; \
		echo "$(LIBPL)/README.readline-2.2";		\
		$(INSTALL_PROGRAM) BeOS/ar-fake $(LIBPL)/ar-fake; \
		echo "$(LIBPL)/ar-fake";			\
		$(INSTALL_PROGRAM) BeOS/linkmodule $(LIBPL)/linkmodule; \
		echo "$(LIBPL)/linkmodule";			\
		echo; echo "See BeOS/README for details.";	\
		;; \
	esac

# Install the dynamically loadable modules
# This goes into $(exec_prefix)
sharedinstall:
	./python$(EXEEXT) $(srcdir)/setup.py install \
		--install-platlib=$(DESTSHARED)

# Build the toplevel Makefile
Makefile.pre: Makefile.pre.in config.status
	CONFIG_FILES=Makefile.pre CONFIG_HEADERS= $(SHELL) config.status
	$(MAKE) -f Makefile.pre Makefile

# Run the configure script.  If config.status already exists,
# call it with the --recheck argument, which reruns configure with the
# same options as it was run last time; otherwise run the configure
# script with options taken from the $(WITH) variable
config.status:	$(srcdir)/configure
	if test -f config.status; \
	then $(SHELL) config.status --recheck; \
	     $(SHELL) config.status; \
	else $(SHELL) $(srcdir)/configure $(WITH); \
	fi

.PRECIOUS: config.status $(PYTHON) Makefile Makefile.pre

# Some make's put the object file in the current directory
.c.o:
	$(CC) -c $(PY_CFLAGS) -o $@ $<

# Rerun configure with the same options as it was run last time,
# provided the config.status script exists
recheck:
	$(SHELL) config.status --recheck
	$(SHELL) config.status

# Rebuild the configure script from configure.in; also rebuild config.h.in
autoconf:
	(cd $(srcdir); autoconf)
	(cd $(srcdir); autoheader)

# Create a tags file for vi
tags::
	cd $(srcdir); \
	ctags -w -t Include/*.h; \
	for i in $(SRCDIRS); do ctags -w -t -a $$i/*.[ch]; \
	done; \
	sort tags -o tags

# Create a tags file for GNU Emacs
TAGS::
	cd $(srcdir); \
	etags Include/*.h; \
	for i in $(SRCDIRS); do etags -a $$i/*.[ch]; done

# Sanitation targets -- clean leaves libraries, executables and tags
# files, which clobber removes those as well

clean:
	# avoid long command lines, same as LIBRARY_OBJS MAINOBJ PGOBJS
	-rm -f $(PARSER_OBJS)
	-rm -f $(OBJECT_OBJS)
	-rm -f $(PYTHON_OBJS)
	-rm -f $(MODULE_OBJS) $(SIGNAL_OBJS) Modules/getbuildinfo.o
	-rm -f $(MODOBJS) $(MAINOBJ) $(PGOBJS)
	if test -f build; then find build -name '*.o' -exec rm -f {} ';' ; fi
	find $(srcdir) -name '*.py[co]' -exec rm -f {} ';'

clobber: clean
	-rm -f tags TAGS $(PYTHON) $(LIBRARY) $(LDLIBRARY) $(DLLLIBRARY) \
		Modules/*.so Modules/*.sl Parser/pgen
	-rm -rf build

# Make things extra clean, before making a distribution:
# remove all generated files, even Makefile[.pre]
distclean: clobber
	-rm -f core Makefile Makefile.pre buildno config.status \
		config.log config.cache config.h Modules/config.c \
		Modules/Setup Modules/Setup.local Modules/Setup.config
	find $(srcdir) '(' -name '*.fdc' -o -name '*~' \
			   -o -name '[@,#]*' -o -name '*.old' \
			   -o -name '*.orig' -o -name '*.rej' \
			   -o -name '*.bak' ')' \
			   -exec rm -f {} ';'

# Check for smelly exported symbols (not starting with Py/_Py)
smelly: all
	nm -p $(LIBRARY) | \
		sed -n "/ [TDB] /s/.* //p" | grep -v "^_*Py" | sort -u; \

# Find files with funny names
funny:
	find $(DISTDIRS) -type d \
		-o -name '*.[chs]' \
		-o -name '*.py' \
		-o -name '*.doc' \
		-o -name '*.sty' \
		-o -name '*.bib' \
		-o -name '*.dat' \
		-o -name '*.el' \
		-o -name '*.fd' \
		-o -name '*.in' \
		-o -name '*.tex' \
		-o -name '*,[vpt]' \
		-o -name 'Setup' \
		-o -name 'Setup.*' \
		-o -name README \
		-o -name Makefile \
		-o -name ChangeLog \
		-o -name Repository \
		-o -name Root \
		-o -name Entries \
		-o -name Tag \
		-o -name tags \
		-o -name TAGS \
		-o -name .cvsignore \
		-o -name MANIFEST \
		-o -print

# IF YOU PUT ANYTHING HERE IT WILL GO AWAY