blob: a6f8c5a70894fa3001940875a9036126b2d1e78e [file] [log] [blame]
/* Socket module */
/*
This module provides an interface to Berkeley socket IPC.
Limitations:
- Only AF_INET, AF_INET6 and AF_UNIX address families are supported in a
portable manner, though AF_PACKET, AF_NETLINK and AF_TIPC are supported
under Linux.
- No read/write operations (use sendall/recv or makefile instead).
- Additional restrictions apply on some non-Unix platforms (compensated
for by socket.py).
Module interface:
- socket.error: exception raised for socket specific errors
- socket.gaierror: exception raised for getaddrinfo/getnameinfo errors,
a subclass of socket.error
- socket.herror: exception raised for gethostby* errors,
a subclass of socket.error
- socket.gethostbyname(hostname) --> host IP address (string: 'dd.dd.dd.dd')
- socket.gethostbyaddr(IP address) --> (hostname, [alias, ...], [IP addr, ...])
- socket.gethostname() --> host name (string: 'spam' or 'spam.domain.com')
- socket.getprotobyname(protocolname) --> protocol number
- socket.getservbyname(servicename[, protocolname]) --> port number
- socket.getservbyport(portnumber[, protocolname]) --> service name
- socket.socket([family[, type [, proto, fileno]]]) --> new socket object
(fileno specifies a pre-existing socket file descriptor)
- socket.socketpair([family[, type [, proto]]]) --> (socket, socket)
- socket.ntohs(16 bit value) --> new int object
- socket.ntohl(32 bit value) --> new int object
- socket.htons(16 bit value) --> new int object
- socket.htonl(32 bit value) --> new int object
- socket.getaddrinfo(host, port [, family, socktype, proto, flags])
--> List of (family, socktype, proto, canonname, sockaddr)
- socket.getnameinfo(sockaddr, flags) --> (host, port)
- socket.AF_INET, socket.SOCK_STREAM, etc.: constants from <socket.h>
- socket.has_ipv6: boolean value indicating if IPv6 is supported
- socket.inet_aton(IP address) -> 32-bit packed IP representation
- socket.inet_ntoa(packed IP) -> IP address string
- socket.getdefaulttimeout() -> None | float
- socket.setdefaulttimeout(None | float)
- socket.if_nameindex() -> list of tuples (if_index, if_name)
- socket.if_nametoindex(name) -> corresponding interface index
- socket.if_indextoname(index) -> corresponding interface name
- an Internet socket address is a pair (hostname, port)
where hostname can be anything recognized by gethostbyname()
(including the dd.dd.dd.dd notation) and port is in host byte order
- where a hostname is returned, the dd.dd.dd.dd notation is used
- a UNIX domain socket address is a string specifying the pathname
- an AF_PACKET socket address is a tuple containing a string
specifying the ethernet interface and an integer specifying
the Ethernet protocol number to be received. For example:
("eth0",0x1234). Optional 3rd,4th,5th elements in the tuple
specify packet-type and ha-type/addr.
- an AF_TIPC socket address is expressed as
(addr_type, v1, v2, v3 [, scope]); where addr_type can be one of:
TIPC_ADDR_NAMESEQ, TIPC_ADDR_NAME, and TIPC_ADDR_ID;
and scope can be one of:
TIPC_ZONE_SCOPE, TIPC_CLUSTER_SCOPE, and TIPC_NODE_SCOPE.
The meaning of v1, v2 and v3 depends on the value of addr_type:
if addr_type is TIPC_ADDR_NAME:
v1 is the server type
v2 is the port identifier
v3 is ignored
if addr_type is TIPC_ADDR_NAMESEQ:
v1 is the server type
v2 is the lower port number
v3 is the upper port number
if addr_type is TIPC_ADDR_ID:
v1 is the node
v2 is the ref
v3 is ignored
Local naming conventions:
- names starting with sock_ are socket object methods
- names starting with socket_ are module-level functions
- names starting with PySocket are exported through socketmodule.h
*/
#ifdef __APPLE__
/*
* inet_aton is not available on OSX 10.3, yet we want to use a binary
* that was build on 10.4 or later to work on that release, weak linking
* comes to the rescue.
*/
# pragma weak inet_aton
#endif
#include "Python.h"
#include "structmember.h"
#undef MAX
#define MAX(x, y) ((x) < (y) ? (y) : (x))
/* Socket object documentation */
PyDoc_STRVAR(sock_doc,
"socket([family[, type[, proto]]]) -> socket object\n\
\n\
Open a socket of the given type. The family argument specifies the\n\
address family; it defaults to AF_INET. The type argument specifies\n\
whether this is a stream (SOCK_STREAM, this is the default)\n\
or datagram (SOCK_DGRAM) socket. The protocol argument defaults to 0,\n\
specifying the default protocol. Keyword arguments are accepted.\n\
\n\
A socket object represents one endpoint of a network connection.\n\
\n\
Methods of socket objects (keyword arguments not allowed):\n\
\n\
_accept() -- accept connection, returning new socket fd and client address\n\
bind(addr) -- bind the socket to a local address\n\
close() -- close the socket\n\
connect(addr) -- connect the socket to a remote address\n\
connect_ex(addr) -- connect, return an error code instead of an exception\n\
_dup() -- return a new socket fd duplicated from fileno()\n\
fileno() -- return underlying file descriptor\n\
getpeername() -- return remote address [*]\n\
getsockname() -- return local address\n\
getsockopt(level, optname[, buflen]) -- get socket options\n\
gettimeout() -- return timeout or None\n\
listen(n) -- start listening for incoming connections\n\
recv(buflen[, flags]) -- receive data\n\
recv_into(buffer[, nbytes[, flags]]) -- receive data (into a buffer)\n\
recvfrom(buflen[, flags]) -- receive data and sender\'s address\n\
recvfrom_into(buffer[, nbytes, [, flags])\n\
-- receive data and sender\'s address (into a buffer)\n\
sendall(data[, flags]) -- send all data\n\
send(data[, flags]) -- send data, may not send all of it\n\
sendto(data[, flags], addr) -- send data to a given address\n\
setblocking(0 | 1) -- set or clear the blocking I/O flag\n\
setsockopt(level, optname, value) -- set socket options\n\
settimeout(None | float) -- set or clear the timeout\n\
shutdown(how) -- shut down traffic in one or both directions\n\
if_nameindex() -- return all network interface indices and names\n\
if_nametoindex(name) -- return the corresponding interface index\n\
if_indextoname(index) -- return the corresponding interface name\n\
\n\
[*] not available on all platforms!");
/* XXX This is a terrible mess of platform-dependent preprocessor hacks.
I hope some day someone can clean this up please... */
/* Hacks for gethostbyname_r(). On some non-Linux platforms, the configure
script doesn't get this right, so we hardcode some platform checks below.
On the other hand, not all Linux versions agree, so there the settings
computed by the configure script are needed! */
#ifndef linux
# undef HAVE_GETHOSTBYNAME_R_3_ARG
# undef HAVE_GETHOSTBYNAME_R_5_ARG
# undef HAVE_GETHOSTBYNAME_R_6_ARG
#endif
#if defined(__OpenBSD__)
# include <sys/uio.h>
#endif
#ifndef WITH_THREAD
# undef HAVE_GETHOSTBYNAME_R
#endif
#ifdef HAVE_GETHOSTBYNAME_R
# if defined(_AIX)
# define HAVE_GETHOSTBYNAME_R_3_ARG
# elif defined(__sun) || defined(__sgi)
# define HAVE_GETHOSTBYNAME_R_5_ARG
# elif defined(linux)
/* Rely on the configure script */
# else
# undef HAVE_GETHOSTBYNAME_R
# endif
#endif
#if !defined(HAVE_GETHOSTBYNAME_R) && defined(WITH_THREAD) && \
!defined(MS_WINDOWS)
# define USE_GETHOSTBYNAME_LOCK
#endif
/* To use __FreeBSD_version */
#ifdef HAVE_SYS_PARAM_H
#include <sys/param.h>
#endif
/* On systems on which getaddrinfo() is believed to not be thread-safe,
(this includes the getaddrinfo emulation) protect access with a lock. */
#if defined(WITH_THREAD) && (defined(__APPLE__) || \
(defined(__FreeBSD__) && __FreeBSD_version+0 < 503000) || \
defined(__OpenBSD__) || defined(__NetBSD__) || \
defined(__VMS) || !defined(HAVE_GETADDRINFO))
#define USE_GETADDRINFO_LOCK
#endif
#ifdef USE_GETADDRINFO_LOCK
#define ACQUIRE_GETADDRINFO_LOCK PyThread_acquire_lock(netdb_lock, 1);
#define RELEASE_GETADDRINFO_LOCK PyThread_release_lock(netdb_lock);
#else
#define ACQUIRE_GETADDRINFO_LOCK
#define RELEASE_GETADDRINFO_LOCK
#endif
#if defined(USE_GETHOSTBYNAME_LOCK) || defined(USE_GETADDRINFO_LOCK)
# include "pythread.h"
#endif
#if defined(PYCC_VACPP)
# include <types.h>
# include <io.h>
# include <sys/ioctl.h>
# include <utils.h>
# include <ctype.h>
#endif
#if defined(__VMS)
# include <ioctl.h>
#endif
#ifdef __APPLE__
# include <sys/ioctl.h>
#endif
#if defined(PYOS_OS2)
# define INCL_DOS
# define INCL_DOSERRORS
# define INCL_NOPMAPI
# include <os2.h>
#endif
#if defined(__sgi) && _COMPILER_VERSION>700 && !_SGIAPI
/* make sure that the reentrant (gethostbyaddr_r etc)
functions are declared correctly if compiling with
MIPSPro 7.x in ANSI C mode (default) */
/* XXX Using _SGIAPI is the wrong thing,
but I don't know what the right thing is. */
#undef _SGIAPI /* to avoid warning */
#define _SGIAPI 1
#undef _XOPEN_SOURCE
#include <sys/socket.h>
#include <sys/types.h>
#include <netinet/in.h>
#ifdef _SS_ALIGNSIZE
#define HAVE_GETADDRINFO 1
#define HAVE_GETNAMEINFO 1
#endif
#define HAVE_INET_PTON
#include <netdb.h>
#endif
/* Irix 6.5 fails to define this variable at all. This is needed
for both GCC and SGI's compiler. I'd say that the SGI headers
are just busted. Same thing for Solaris. */
#if (defined(__sgi) || defined(sun)) && !defined(INET_ADDRSTRLEN)
#define INET_ADDRSTRLEN 16
#endif
/* Generic includes */
#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif
#ifdef HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif
#ifdef HAVE_NET_IF_H
#include <net/if.h>
#endif
/* Generic socket object definitions and includes */
#define PySocket_BUILDING_SOCKET
#include "socketmodule.h"
/* Addressing includes */
#ifndef MS_WINDOWS
/* Non-MS WINDOWS includes */
# include <netdb.h>
# include <unistd.h>
/* Headers needed for inet_ntoa() and inet_addr() */
# if defined(PYOS_OS2) && defined(PYCC_VACPP)
# include <netdb.h>
typedef size_t socklen_t;
# else
# include <arpa/inet.h>
# endif
# include <fcntl.h>
#else
/* MS_WINDOWS includes */
# ifdef HAVE_FCNTL_H
# include <fcntl.h>
# endif
#endif
#include <stddef.h>
#ifndef offsetof
# define offsetof(type, member) ((size_t)(&((type *)0)->member))
#endif
#ifndef O_NONBLOCK
# define O_NONBLOCK O_NDELAY
#endif
/* include Python's addrinfo.h unless it causes trouble */
#if defined(__sgi) && _COMPILER_VERSION>700 && defined(_SS_ALIGNSIZE)
/* Do not include addinfo.h on some newer IRIX versions.
* _SS_ALIGNSIZE is defined in sys/socket.h by 6.5.21,
* for example, but not by 6.5.10.
*/
#elif defined(_MSC_VER) && _MSC_VER>1201
/* Do not include addrinfo.h for MSVC7 or greater. 'addrinfo' and
* EAI_* constants are defined in (the already included) ws2tcpip.h.
*/
#else
# include "addrinfo.h"
#endif
#ifndef HAVE_INET_PTON
#if !defined(NTDDI_VERSION) || (NTDDI_VERSION < NTDDI_LONGHORN)
int inet_pton(int af, const char *src, void *dst);
const char *inet_ntop(int af, const void *src, char *dst, socklen_t size);
#endif
#endif
#ifdef __APPLE__
/* On OS X, getaddrinfo returns no error indication of lookup
failure, so we must use the emulation instead of the libinfo
implementation. Unfortunately, performing an autoconf test
for this bug would require DNS access for the machine performing
the configuration, which is not acceptable. Therefore, we
determine the bug just by checking for __APPLE__. If this bug
gets ever fixed, perhaps checking for sys/version.h would be
appropriate, which is 10/0 on the system with the bug. */
#ifndef HAVE_GETNAMEINFO
/* This bug seems to be fixed in Jaguar. Ths easiest way I could
Find to check for Jaguar is that it has getnameinfo(), which
older releases don't have */
#undef HAVE_GETADDRINFO
#endif
#ifdef HAVE_INET_ATON
#define USE_INET_ATON_WEAKLINK
#endif
#endif
/* I know this is a bad practice, but it is the easiest... */
#if !defined(HAVE_GETADDRINFO)
/* avoid clashes with the C library definition of the symbol. */
#define getaddrinfo fake_getaddrinfo
#define gai_strerror fake_gai_strerror
#define freeaddrinfo fake_freeaddrinfo
#include "getaddrinfo.c"
#endif
#if !defined(HAVE_GETNAMEINFO)
#define getnameinfo fake_getnameinfo
#include "getnameinfo.c"
#endif
#ifdef MS_WINDOWS
/* On Windows a socket is really a handle not an fd */
static SOCKET
dup_socket(SOCKET handle)
{
WSAPROTOCOL_INFO info;
if (WSADuplicateSocket(handle, GetCurrentProcessId(), &info))
return INVALID_SOCKET;
return WSASocket(FROM_PROTOCOL_INFO, FROM_PROTOCOL_INFO,
FROM_PROTOCOL_INFO, &info, 0, WSA_FLAG_OVERLAPPED);
}
#define SOCKETCLOSE closesocket
#else
/* On Unix we can use dup to duplicate the file descriptor of a socket*/
#define dup_socket(fd) dup(fd)
#endif
#ifdef MS_WIN32
#undef EAFNOSUPPORT
#define EAFNOSUPPORT WSAEAFNOSUPPORT
#define snprintf _snprintf
#endif
#if defined(PYOS_OS2) && !defined(PYCC_GCC)
#define SOCKETCLOSE soclose
#define NO_DUP /* Sockets are Not Actual File Handles under OS/2 */
#endif
#ifndef SOCKETCLOSE
#define SOCKETCLOSE close
#endif
#if (defined(HAVE_BLUETOOTH_H) || defined(HAVE_BLUETOOTH_BLUETOOTH_H)) && !defined(__NetBSD__) && !defined(__DragonFly__)
#define USE_BLUETOOTH 1
#if defined(__FreeBSD__)
#define BTPROTO_L2CAP BLUETOOTH_PROTO_L2CAP
#define BTPROTO_RFCOMM BLUETOOTH_PROTO_RFCOMM
#define BTPROTO_HCI BLUETOOTH_PROTO_HCI
#define SOL_HCI SOL_HCI_RAW
#define HCI_FILTER SO_HCI_RAW_FILTER
#define sockaddr_l2 sockaddr_l2cap
#define sockaddr_rc sockaddr_rfcomm
#define hci_dev hci_node
#define _BT_L2_MEMB(sa, memb) ((sa)->l2cap_##memb)
#define _BT_RC_MEMB(sa, memb) ((sa)->rfcomm_##memb)
#define _BT_HCI_MEMB(sa, memb) ((sa)->hci_##memb)
#elif defined(__NetBSD__) || defined(__DragonFly__)
#define sockaddr_l2 sockaddr_bt
#define sockaddr_rc sockaddr_bt
#define sockaddr_hci sockaddr_bt
#define sockaddr_sco sockaddr_bt
#define SOL_HCI BTPROTO_HCI
#define HCI_DATA_DIR SO_HCI_DIRECTION
#define _BT_L2_MEMB(sa, memb) ((sa)->bt_##memb)
#define _BT_RC_MEMB(sa, memb) ((sa)->bt_##memb)
#define _BT_HCI_MEMB(sa, memb) ((sa)->bt_##memb)
#define _BT_SCO_MEMB(sa, memb) ((sa)->bt_##memb)
#else
#define _BT_L2_MEMB(sa, memb) ((sa)->l2_##memb)
#define _BT_RC_MEMB(sa, memb) ((sa)->rc_##memb)
#define _BT_HCI_MEMB(sa, memb) ((sa)->hci_##memb)
#define _BT_SCO_MEMB(sa, memb) ((sa)->sco_##memb)
#endif
#endif
#ifdef __VMS
/* TCP/IP Services for VMS uses a maximum send/recv buffer length */
#define SEGMENT_SIZE (32 * 1024 -1)
#endif
/* Convert "sock_addr_t *" to "struct sockaddr *". */
#define SAS2SA(x) (&((x)->sa))
/*
* Constants for getnameinfo()
*/
#if !defined(NI_MAXHOST)
#define NI_MAXHOST 1025
#endif
#if !defined(NI_MAXSERV)
#define NI_MAXSERV 32
#endif
#ifndef INVALID_SOCKET /* MS defines this */
#define INVALID_SOCKET (-1)
#endif
/* XXX There's a problem here: *static* functions are not supposed to have
a Py prefix (or use CapitalizedWords). Later... */
/* Global variable holding the exception type for errors detected
by this module (but not argument type or memory errors, etc.). */
static PyObject *socket_herror;
static PyObject *socket_gaierror;
static PyObject *socket_timeout;
/* A forward reference to the socket type object.
The sock_type variable contains pointers to various functions,
some of which call new_sockobject(), which uses sock_type, so
there has to be a circular reference. */
static PyTypeObject sock_type;
#if defined(HAVE_POLL_H)
#include <poll.h>
#elif defined(HAVE_SYS_POLL_H)
#include <sys/poll.h>
#endif
/* Largest value to try to store in a socklen_t (used when handling
ancillary data). POSIX requires socklen_t to hold at least
(2**31)-1 and recommends against storing larger values, but
socklen_t was originally int in the BSD interface, so to be on the
safe side we use the smaller of (2**31)-1 and INT_MAX. */
#if INT_MAX > 0x7fffffff
#define SOCKLEN_T_LIMIT 0x7fffffff
#else
#define SOCKLEN_T_LIMIT INT_MAX
#endif
#ifdef HAVE_POLL
/* Instead of select(), we'll use poll() since poll() works on any fd. */
#define IS_SELECTABLE(s) 1
/* Can we call select() with this socket without a buffer overrun? */
#else
/* If there's no timeout left, we don't have to call select, so it's a safe,
* little white lie. */
#define IS_SELECTABLE(s) (_PyIsSelectable_fd((s)->sock_fd) || (s)->sock_timeout <= 0.0)
#endif
static PyObject*
select_error(void)
{
PyErr_SetString(PyExc_OSError, "unable to select on socket");
return NULL;
}
#ifdef MS_WINDOWS
#ifndef WSAEAGAIN
#define WSAEAGAIN WSAEWOULDBLOCK
#endif
#define CHECK_ERRNO(expected) \
(WSAGetLastError() == WSA ## expected)
#else
#define CHECK_ERRNO(expected) \
(errno == expected)
#endif
/* Convenience function to raise an error according to errno
and return a NULL pointer from a function. */
static PyObject *
set_error(void)
{
#ifdef MS_WINDOWS
int err_no = WSAGetLastError();
/* PyErr_SetExcFromWindowsErr() invokes FormatMessage() which
recognizes the error codes used by both GetLastError() and
WSAGetLastError */
if (err_no)
return PyErr_SetExcFromWindowsErr(PyExc_OSError, err_no);
#endif
#if defined(PYOS_OS2) && !defined(PYCC_GCC)
if (sock_errno() != NO_ERROR) {
APIRET rc;
ULONG msglen;
char outbuf[100];
int myerrorcode = sock_errno();
/* Retrieve socket-related error message from MPTN.MSG file */
rc = DosGetMessage(NULL, 0, outbuf, sizeof(outbuf),
myerrorcode - SOCBASEERR + 26,
"mptn.msg",
&msglen);
if (rc == NO_ERROR) {
PyObject *v;
/* OS/2 doesn't guarantee a terminator */
outbuf[msglen] = '\0';
if (strlen(outbuf) > 0) {
/* If non-empty msg, trim CRLF */
char *lastc = &outbuf[ strlen(outbuf)-1 ];
while (lastc > outbuf &&
Py_ISSPACE(Py_CHARMASK(*lastc))) {
/* Trim trailing whitespace (CRLF) */
*lastc-- = '\0';
}
}
v = Py_BuildValue("(is)", myerrorcode, outbuf);
if (v != NULL) {
PyErr_SetObject(PyExc_OSError, v);
Py_DECREF(v);
}
return NULL;
}
}
#endif
return PyErr_SetFromErrno(PyExc_OSError);
}
static PyObject *
set_herror(int h_error)
{
PyObject *v;
#ifdef HAVE_HSTRERROR
v = Py_BuildValue("(is)", h_error, (char *)hstrerror(h_error));
#else
v = Py_BuildValue("(is)", h_error, "host not found");
#endif
if (v != NULL) {
PyErr_SetObject(socket_herror, v);
Py_DECREF(v);
}
return NULL;
}
static PyObject *
set_gaierror(int error)
{
PyObject *v;
#ifdef EAI_SYSTEM
/* EAI_SYSTEM is not available on Windows XP. */
if (error == EAI_SYSTEM)
return set_error();
#endif
#ifdef HAVE_GAI_STRERROR
v = Py_BuildValue("(is)", error, gai_strerror(error));
#else
v = Py_BuildValue("(is)", error, "getaddrinfo failed");
#endif
if (v != NULL) {
PyErr_SetObject(socket_gaierror, v);
Py_DECREF(v);
}
return NULL;
}
#ifdef __VMS
/* Function to send in segments */
static int
sendsegmented(int sock_fd, char *buf, int len, int flags)
{
int n = 0;
int remaining = len;
while (remaining > 0) {
unsigned int segment;
segment = (remaining >= SEGMENT_SIZE ? SEGMENT_SIZE : remaining);
n = send(sock_fd, buf, segment, flags);
if (n < 0) {
return n;
}
remaining -= segment;
buf += segment;
} /* end while */
return len;
}
#endif
/* Function to perform the setting of socket blocking mode
internally. block = (1 | 0). */
static int
internal_setblocking(PySocketSockObject *s, int block)
{
#ifndef MS_WINDOWS
int delay_flag;
#endif
#ifdef SOCK_NONBLOCK
if (block)
s->sock_type &= (~SOCK_NONBLOCK);
else
s->sock_type |= SOCK_NONBLOCK;
#endif
Py_BEGIN_ALLOW_THREADS
#ifndef MS_WINDOWS
#if defined(PYOS_OS2) && !defined(PYCC_GCC)
block = !block;
ioctl(s->sock_fd, FIONBIO, (caddr_t)&block, sizeof(block));
#elif defined(__VMS)
block = !block;
ioctl(s->sock_fd, FIONBIO, (unsigned int *)&block);
#else /* !PYOS_OS2 && !__VMS */
delay_flag = fcntl(s->sock_fd, F_GETFL, 0);
if (block)
delay_flag &= (~O_NONBLOCK);
else
delay_flag |= O_NONBLOCK;
fcntl(s->sock_fd, F_SETFL, delay_flag);
#endif /* !PYOS_OS2 */
#else /* MS_WINDOWS */
block = !block;
ioctlsocket(s->sock_fd, FIONBIO, (u_long*)&block);
#endif /* MS_WINDOWS */
Py_END_ALLOW_THREADS
/* Since these don't return anything */
return 1;
}
/* Do a select()/poll() on the socket, if necessary (sock_timeout > 0).
The argument writing indicates the direction.
This does not raise an exception; we'll let our caller do that
after they've reacquired the interpreter lock.
Returns 1 on timeout, -1 on error, 0 otherwise. */
static int
internal_select_ex(PySocketSockObject *s, int writing, double interval)
{
int n;
/* Nothing to do unless we're in timeout mode (not non-blocking) */
if (s->sock_timeout <= 0.0)
return 0;
/* Guard against closed socket */
if (s->sock_fd < 0)
return 0;
/* Handling this condition here simplifies the select loops */
if (interval < 0.0)
return 1;
/* Prefer poll, if available, since you can poll() any fd
* which can't be done with select(). */
#ifdef HAVE_POLL
{
struct pollfd pollfd;
int timeout;
pollfd.fd = s->sock_fd;
pollfd.events = writing ? POLLOUT : POLLIN;
/* s->sock_timeout is in seconds, timeout in ms */
timeout = (int)(interval * 1000 + 0.5);
n = poll(&pollfd, 1, timeout);
}
#else
{
/* Construct the arguments to select */
fd_set fds;
struct timeval tv;
tv.tv_sec = (int)interval;
tv.tv_usec = (int)((interval - tv.tv_sec) * 1e6);
FD_ZERO(&fds);
FD_SET(s->sock_fd, &fds);
/* See if the socket is ready */
if (writing)
n = select(Py_SAFE_DOWNCAST(s->sock_fd+1, SOCKET_T, int),
NULL, &fds, NULL, &tv);
else
n = select(Py_SAFE_DOWNCAST(s->sock_fd+1, SOCKET_T, int),
&fds, NULL, NULL, &tv);
}
#endif
if (n < 0)
return -1;
if (n == 0)
return 1;
return 0;
}
static int
internal_select(PySocketSockObject *s, int writing)
{
return internal_select_ex(s, writing, s->sock_timeout);
}
/*
Two macros for automatic retry of select() in case of false positives
(for example, select() could indicate a socket is ready for reading
but the data then discarded by the OS because of a wrong checksum).
Here is an example of use:
BEGIN_SELECT_LOOP(s)
Py_BEGIN_ALLOW_THREADS
timeout = internal_select_ex(s, 0, interval);
if (!timeout)
outlen = recv(s->sock_fd, cbuf, len, flags);
Py_END_ALLOW_THREADS
if (timeout == 1) {
PyErr_SetString(socket_timeout, "timed out");
return -1;
}
END_SELECT_LOOP(s)
*/
#define BEGIN_SELECT_LOOP(s) \
{ \
_PyTime_timeval now, deadline = {0, 0}; \
double interval = s->sock_timeout; \
int has_timeout = s->sock_timeout > 0.0; \
if (has_timeout) { \
_PyTime_gettimeofday(&now); \
deadline = now; \
_PyTime_ADD_SECONDS(deadline, s->sock_timeout); \
} \
while (1) { \
errno = 0; \
#define END_SELECT_LOOP(s) \
if (!has_timeout || \
(!CHECK_ERRNO(EWOULDBLOCK) && !CHECK_ERRNO(EAGAIN))) \
break; \
_PyTime_gettimeofday(&now); \
interval = _PyTime_INTERVAL(now, deadline); \
} \
} \
/* Initialize a new socket object. */
static double defaulttimeout = -1.0; /* Default timeout for new sockets */
static void
init_sockobject(PySocketSockObject *s,
SOCKET_T fd, int family, int type, int proto)
{
s->sock_fd = fd;
s->sock_family = family;
s->sock_type = type;
s->sock_proto = proto;
s->errorhandler = &set_error;
#ifdef SOCK_NONBLOCK
if (type & SOCK_NONBLOCK)
s->sock_timeout = 0.0;
else
#endif
{
s->sock_timeout = defaulttimeout;
if (defaulttimeout >= 0.0)
internal_setblocking(s, 0);
}
}
/* Create a new socket object.
This just creates the object and initializes it.
If the creation fails, return NULL and set an exception (implicit
in NEWOBJ()). */
static PySocketSockObject *
new_sockobject(SOCKET_T fd, int family, int type, int proto)
{
PySocketSockObject *s;
s = (PySocketSockObject *)
PyType_GenericNew(&sock_type, NULL, NULL);
if (s != NULL)
init_sockobject(s, fd, family, type, proto);
return s;
}
/* Lock to allow python interpreter to continue, but only allow one
thread to be in gethostbyname or getaddrinfo */
#if defined(USE_GETHOSTBYNAME_LOCK) || defined(USE_GETADDRINFO_LOCK)
static PyThread_type_lock netdb_lock;
#endif
/* Convert a string specifying a host name or one of a few symbolic
names to a numeric IP address. This usually calls gethostbyname()
to do the work; the names "" and "<broadcast>" are special.
Return the length (IPv4 should be 4 bytes), or negative if
an error occurred; then an exception is raised. */
static int
setipaddr(char *name, struct sockaddr *addr_ret, size_t addr_ret_size, int af)
{
struct addrinfo hints, *res;
int error;
int d1, d2, d3, d4;
char ch;
memset((void *) addr_ret, '\0', sizeof(*addr_ret));
if (name[0] == '\0') {
int siz;
memset(&hints, 0, sizeof(hints));
hints.ai_family = af;
hints.ai_socktype = SOCK_DGRAM; /*dummy*/
hints.ai_flags = AI_PASSIVE;
Py_BEGIN_ALLOW_THREADS
ACQUIRE_GETADDRINFO_LOCK
error = getaddrinfo(NULL, "0", &hints, &res);
Py_END_ALLOW_THREADS
/* We assume that those thread-unsafe getaddrinfo() versions
*are* safe regarding their return value, ie. that a
subsequent call to getaddrinfo() does not destroy the
outcome of the first call. */
RELEASE_GETADDRINFO_LOCK
if (error) {
set_gaierror(error);
return -1;
}
switch (res->ai_family) {
case AF_INET:
siz = 4;
break;
#ifdef ENABLE_IPV6
case AF_INET6:
siz = 16;
break;
#endif
default:
freeaddrinfo(res);
PyErr_SetString(PyExc_OSError,
"unsupported address family");
return -1;
}
if (res->ai_next) {
freeaddrinfo(res);
PyErr_SetString(PyExc_OSError,
"wildcard resolved to multiple address");
return -1;
}
if (res->ai_addrlen < addr_ret_size)
addr_ret_size = res->ai_addrlen;
memcpy(addr_ret, res->ai_addr, addr_ret_size);
freeaddrinfo(res);
return siz;
}
if (name[0] == '<' && strcmp(name, "<broadcast>") == 0) {
struct sockaddr_in *sin;
if (af != AF_INET && af != AF_UNSPEC) {
PyErr_SetString(PyExc_OSError,
"address family mismatched");
return -1;
}
sin = (struct sockaddr_in *)addr_ret;
memset((void *) sin, '\0', sizeof(*sin));
sin->sin_family = AF_INET;
#ifdef HAVE_SOCKADDR_SA_LEN
sin->sin_len = sizeof(*sin);
#endif
sin->sin_addr.s_addr = INADDR_BROADCAST;
return sizeof(sin->sin_addr);
}
if (sscanf(name, "%d.%d.%d.%d%c", &d1, &d2, &d3, &d4, &ch) == 4 &&
0 <= d1 && d1 <= 255 && 0 <= d2 && d2 <= 255 &&
0 <= d3 && d3 <= 255 && 0 <= d4 && d4 <= 255) {
struct sockaddr_in *sin;
sin = (struct sockaddr_in *)addr_ret;
sin->sin_addr.s_addr = htonl(
((long) d1 << 24) | ((long) d2 << 16) |
((long) d3 << 8) | ((long) d4 << 0));
sin->sin_family = AF_INET;
#ifdef HAVE_SOCKADDR_SA_LEN
sin->sin_len = sizeof(*sin);
#endif
return 4;
}
memset(&hints, 0, sizeof(hints));
hints.ai_family = af;
Py_BEGIN_ALLOW_THREADS
ACQUIRE_GETADDRINFO_LOCK
error = getaddrinfo(name, NULL, &hints, &res);
#if defined(__digital__) && defined(__unix__)
if (error == EAI_NONAME && af == AF_UNSPEC) {
/* On Tru64 V5.1, numeric-to-addr conversion fails
if no address family is given. Assume IPv4 for now.*/
hints.ai_family = AF_INET;
error = getaddrinfo(name, NULL, &hints, &res);
}
#endif
Py_END_ALLOW_THREADS
RELEASE_GETADDRINFO_LOCK /* see comment in setipaddr() */
if (error) {
set_gaierror(error);
return -1;
}
if (res->ai_addrlen < addr_ret_size)
addr_ret_size = res->ai_addrlen;
memcpy((char *) addr_ret, res->ai_addr, addr_ret_size);
freeaddrinfo(res);
switch (addr_ret->sa_family) {
case AF_INET:
return 4;
#ifdef ENABLE_IPV6
case AF_INET6:
return 16;
#endif
default:
PyErr_SetString(PyExc_OSError, "unknown address family");
return -1;
}
}
/* Create a string object representing an IP address.
This is always a string of the form 'dd.dd.dd.dd' (with variable
size numbers). */
static PyObject *
makeipaddr(struct sockaddr *addr, int addrlen)
{
char buf[NI_MAXHOST];
int error;
error = getnameinfo(addr, addrlen, buf, sizeof(buf), NULL, 0,
NI_NUMERICHOST);
if (error) {
set_gaierror(error);
return NULL;
}
return PyUnicode_FromString(buf);
}
#ifdef USE_BLUETOOTH
/* Convert a string representation of a Bluetooth address into a numeric
address. Returns the length (6), or raises an exception and returns -1 if
an error occurred. */
static int
setbdaddr(char *name, bdaddr_t *bdaddr)
{
unsigned int b0, b1, b2, b3, b4, b5;
char ch;
int n;
n = sscanf(name, "%X:%X:%X:%X:%X:%X%c",
&b5, &b4, &b3, &b2, &b1, &b0, &ch);
if (n == 6 && (b0 | b1 | b2 | b3 | b4 | b5) < 256) {
bdaddr->b[0] = b0;
bdaddr->b[1] = b1;
bdaddr->b[2] = b2;
bdaddr->b[3] = b3;
bdaddr->b[4] = b4;
bdaddr->b[5] = b5;
return 6;
} else {
PyErr_SetString(PyExc_OSError, "bad bluetooth address");
return -1;
}
}
/* Create a string representation of the Bluetooth address. This is always a
string of the form 'XX:XX:XX:XX:XX:XX' where XX is a two digit hexadecimal
value (zero padded if necessary). */
static PyObject *
makebdaddr(bdaddr_t *bdaddr)
{
char buf[(6 * 2) + 5 + 1];
sprintf(buf, "%02X:%02X:%02X:%02X:%02X:%02X",
bdaddr->b[5], bdaddr->b[4], bdaddr->b[3],
bdaddr->b[2], bdaddr->b[1], bdaddr->b[0]);
return PyUnicode_FromString(buf);
}
#endif
/* Create an object representing the given socket address,
suitable for passing it back to bind(), connect() etc.
The family field of the sockaddr structure is inspected
to determine what kind of address it really is. */
/*ARGSUSED*/
static PyObject *
makesockaddr(SOCKET_T sockfd, struct sockaddr *addr, size_t addrlen, int proto)
{
if (addrlen == 0) {
/* No address -- may be recvfrom() from known socket */
Py_INCREF(Py_None);
return Py_None;
}
switch (addr->sa_family) {
case AF_INET:
{
struct sockaddr_in *a;
PyObject *addrobj = makeipaddr(addr, sizeof(*a));
PyObject *ret = NULL;
if (addrobj) {
a = (struct sockaddr_in *)addr;
ret = Py_BuildValue("Oi", addrobj, ntohs(a->sin_port));
Py_DECREF(addrobj);
}
return ret;
}
#if defined(AF_UNIX)
case AF_UNIX:
{
struct sockaddr_un *a = (struct sockaddr_un *) addr;
#ifdef linux
if (a->sun_path[0] == 0) { /* Linux abstract namespace */
addrlen -= offsetof(struct sockaddr_un, sun_path);
return PyBytes_FromStringAndSize(a->sun_path, addrlen);
}
else
#endif /* linux */
{
/* regular NULL-terminated string */
return PyUnicode_DecodeFSDefault(a->sun_path);
}
}
#endif /* AF_UNIX */
#if defined(AF_NETLINK)
case AF_NETLINK:
{
struct sockaddr_nl *a = (struct sockaddr_nl *) addr;
return Py_BuildValue("II", a->nl_pid, a->nl_groups);
}
#endif /* AF_NETLINK */
#ifdef ENABLE_IPV6
case AF_INET6:
{
struct sockaddr_in6 *a;
PyObject *addrobj = makeipaddr(addr, sizeof(*a));
PyObject *ret = NULL;
if (addrobj) {
a = (struct sockaddr_in6 *)addr;
ret = Py_BuildValue("OiII",
addrobj,
ntohs(a->sin6_port),
ntohl(a->sin6_flowinfo),
a->sin6_scope_id);
Py_DECREF(addrobj);
}
return ret;
}
#endif
#ifdef USE_BLUETOOTH
case AF_BLUETOOTH:
switch (proto) {
case BTPROTO_L2CAP:
{
struct sockaddr_l2 *a = (struct sockaddr_l2 *) addr;
PyObject *addrobj = makebdaddr(&_BT_L2_MEMB(a, bdaddr));
PyObject *ret = NULL;
if (addrobj) {
ret = Py_BuildValue("Oi",
addrobj,
_BT_L2_MEMB(a, psm));
Py_DECREF(addrobj);
}
return ret;
}
case BTPROTO_RFCOMM:
{
struct sockaddr_rc *a = (struct sockaddr_rc *) addr;
PyObject *addrobj = makebdaddr(&_BT_RC_MEMB(a, bdaddr));
PyObject *ret = NULL;
if (addrobj) {
ret = Py_BuildValue("Oi",
addrobj,
_BT_RC_MEMB(a, channel));
Py_DECREF(addrobj);
}
return ret;
}
case BTPROTO_HCI:
{
struct sockaddr_hci *a = (struct sockaddr_hci *) addr;
#if defined(__NetBSD__) || defined(__DragonFly__)
return makebdaddr(&_BT_HCI_MEMB(a, bdaddr));
#else
PyObject *ret = NULL;
ret = Py_BuildValue("i", _BT_HCI_MEMB(a, dev));
return ret;
#endif
}
#if !defined(__FreeBSD__)
case BTPROTO_SCO:
{
struct sockaddr_sco *a = (struct sockaddr_sco *) addr;
return makebdaddr(&_BT_SCO_MEMB(a, bdaddr));
}
#endif
default:
PyErr_SetString(PyExc_ValueError,
"Unknown Bluetooth protocol");
return NULL;
}
#endif
#if defined(HAVE_NETPACKET_PACKET_H) && defined(SIOCGIFNAME)
case AF_PACKET:
{
struct sockaddr_ll *a = (struct sockaddr_ll *)addr;
char *ifname = "";
struct ifreq ifr;
/* need to look up interface name give index */
if (a->sll_ifindex) {
ifr.ifr_ifindex = a->sll_ifindex;
if (ioctl(sockfd, SIOCGIFNAME, &ifr) == 0)
ifname = ifr.ifr_name;
}
return Py_BuildValue("shbhy#",
ifname,
ntohs(a->sll_protocol),
a->sll_pkttype,
a->sll_hatype,
a->sll_addr,
a->sll_halen);
}
#endif
#ifdef HAVE_LINUX_TIPC_H
case AF_TIPC:
{
struct sockaddr_tipc *a = (struct sockaddr_tipc *) addr;
if (a->addrtype == TIPC_ADDR_NAMESEQ) {
return Py_BuildValue("IIIII",
a->addrtype,
a->addr.nameseq.type,
a->addr.nameseq.lower,
a->addr.nameseq.upper,
a->scope);
} else if (a->addrtype == TIPC_ADDR_NAME) {
return Py_BuildValue("IIIII",
a->addrtype,
a->addr.name.name.type,
a->addr.name.name.instance,
a->addr.name.name.instance,
a->scope);
} else if (a->addrtype == TIPC_ADDR_ID) {
return Py_BuildValue("IIIII",
a->addrtype,
a->addr.id.node,
a->addr.id.ref,
0,
a->scope);
} else {
PyErr_SetString(PyExc_ValueError,
"Invalid address type");
return NULL;
}
}
#endif
#ifdef AF_CAN
case AF_CAN:
{
struct sockaddr_can *a = (struct sockaddr_can *)addr;
char *ifname = "";
struct ifreq ifr;
/* need to look up interface name given index */
if (a->can_ifindex) {
ifr.ifr_ifindex = a->can_ifindex;
if (ioctl(sockfd, SIOCGIFNAME, &ifr) == 0)
ifname = ifr.ifr_name;
}
return Py_BuildValue("O&h", PyUnicode_DecodeFSDefault,
ifname,
a->can_family);
}
#endif
#ifdef PF_SYSTEM
case PF_SYSTEM:
switch(proto) {
#ifdef SYSPROTO_CONTROL
case SYSPROTO_CONTROL:
{
struct sockaddr_ctl *a = (struct sockaddr_ctl *)addr;
return Py_BuildValue("(II)", a->sc_id, a->sc_unit);
}
#endif
default:
PyErr_SetString(PyExc_ValueError,
"Invalid address type");
return 0;
}
#endif
/* More cases here... */
default:
/* If we don't know the address family, don't raise an
exception -- return it as an (int, bytes) tuple. */
return Py_BuildValue("iy#",
addr->sa_family,
addr->sa_data,
sizeof(addr->sa_data));
}
}
/* Parse a socket address argument according to the socket object's
address family. Return 1 if the address was in the proper format,
0 of not. The address is returned through addr_ret, its length
through len_ret. */
static int
getsockaddrarg(PySocketSockObject *s, PyObject *args,
struct sockaddr *addr_ret, int *len_ret)
{
switch (s->sock_family) {
#if defined(AF_UNIX)
case AF_UNIX:
{
struct sockaddr_un* addr;
char *path;
int len;
int retval = 0;
/* PEP 383. Not using PyUnicode_FSConverter since we need to
allow embedded nulls on Linux. */
if (PyUnicode_Check(args)) {
if ((args = PyUnicode_EncodeFSDefault(args)) == NULL)
return 0;
}
else
Py_INCREF(args);
if (!PyArg_Parse(args, "y#", &path, &len))
goto unix_out;
addr = (struct sockaddr_un*)addr_ret;
#ifdef linux
if (len > 0 && path[0] == 0) {
/* Linux abstract namespace extension */
if (len > sizeof addr->sun_path) {
PyErr_SetString(PyExc_OSError,
"AF_UNIX path too long");
goto unix_out;
}
}
else
#endif /* linux */
{
/* regular NULL-terminated string */
if (len >= sizeof addr->sun_path) {
PyErr_SetString(PyExc_OSError,
"AF_UNIX path too long");
goto unix_out;
}
addr->sun_path[len] = 0;
}
addr->sun_family = s->sock_family;
memcpy(addr->sun_path, path, len);
#if defined(PYOS_OS2)
*len_ret = sizeof(*addr);
#else
*len_ret = len + offsetof(struct sockaddr_un, sun_path);
#endif
retval = 1;
unix_out:
Py_DECREF(args);
return retval;
}
#endif /* AF_UNIX */
#if defined(AF_NETLINK)
case AF_NETLINK:
{
struct sockaddr_nl* addr;
int pid, groups;
addr = (struct sockaddr_nl *)addr_ret;
if (!PyTuple_Check(args)) {
PyErr_Format(
PyExc_TypeError,
"getsockaddrarg: "
"AF_NETLINK address must be tuple, not %.500s",
Py_TYPE(args)->tp_name);
return 0;
}
if (!PyArg_ParseTuple(args, "II:getsockaddrarg", &pid, &groups))
return 0;
addr->nl_family = AF_NETLINK;
addr->nl_pid = pid;
addr->nl_groups = groups;
*len_ret = sizeof(*addr);
return 1;
}
#endif
#ifdef AF_RDS
case AF_RDS:
/* RDS sockets use sockaddr_in: fall-through */
#endif
case AF_INET:
{
struct sockaddr_in* addr;
char *host;
int port, result;
if (!PyTuple_Check(args)) {
PyErr_Format(
PyExc_TypeError,
"getsockaddrarg: "
"AF_INET address must be tuple, not %.500s",
Py_TYPE(args)->tp_name);
return 0;
}
if (!PyArg_ParseTuple(args, "eti:getsockaddrarg",
"idna", &host, &port))
return 0;
addr=(struct sockaddr_in*)addr_ret;
result = setipaddr(host, (struct sockaddr *)addr,
sizeof(*addr), AF_INET);
PyMem_Free(host);
if (result < 0)
return 0;
if (port < 0 || port > 0xffff) {
PyErr_SetString(
PyExc_OverflowError,
"getsockaddrarg: port must be 0-65535.");
return 0;
}
addr->sin_family = AF_INET;
addr->sin_port = htons((short)port);
*len_ret = sizeof *addr;
return 1;
}
#ifdef ENABLE_IPV6
case AF_INET6:
{
struct sockaddr_in6* addr;
char *host;
int port, result;
unsigned int flowinfo, scope_id;
flowinfo = scope_id = 0;
if (!PyTuple_Check(args)) {
PyErr_Format(
PyExc_TypeError,
"getsockaddrarg: "
"AF_INET6 address must be tuple, not %.500s",
Py_TYPE(args)->tp_name);
return 0;
}
if (!PyArg_ParseTuple(args, "eti|II",
"idna", &host, &port, &flowinfo,
&scope_id)) {
return 0;
}
addr = (struct sockaddr_in6*)addr_ret;
result = setipaddr(host, (struct sockaddr *)addr,
sizeof(*addr), AF_INET6);
PyMem_Free(host);
if (result < 0)
return 0;
if (port < 0 || port > 0xffff) {
PyErr_SetString(
PyExc_OverflowError,
"getsockaddrarg: port must be 0-65535.");
return 0;
}
if (flowinfo > 0xfffff) {
PyErr_SetString(
PyExc_OverflowError,
"getsockaddrarg: flowinfo must be 0-1048575.");
return 0;
}
addr->sin6_family = s->sock_family;
addr->sin6_port = htons((short)port);
addr->sin6_flowinfo = htonl(flowinfo);
addr->sin6_scope_id = scope_id;
*len_ret = sizeof *addr;
return 1;
}
#endif
#ifdef USE_BLUETOOTH
case AF_BLUETOOTH:
{
switch (s->sock_proto) {
case BTPROTO_L2CAP:
{
struct sockaddr_l2 *addr;
char *straddr;
addr = (struct sockaddr_l2 *)addr_ret;
memset(addr, 0, sizeof(struct sockaddr_l2));
_BT_L2_MEMB(addr, family) = AF_BLUETOOTH;
if (!PyArg_ParseTuple(args, "si", &straddr,
&_BT_L2_MEMB(addr, psm))) {
PyErr_SetString(PyExc_OSError, "getsockaddrarg: "
"wrong format");
return 0;
}
if (setbdaddr(straddr, &_BT_L2_MEMB(addr, bdaddr)) < 0)
return 0;
*len_ret = sizeof *addr;
return 1;
}
case BTPROTO_RFCOMM:
{
struct sockaddr_rc *addr;
char *straddr;
addr = (struct sockaddr_rc *)addr_ret;
_BT_RC_MEMB(addr, family) = AF_BLUETOOTH;
if (!PyArg_ParseTuple(args, "si", &straddr,
&_BT_RC_MEMB(addr, channel))) {
PyErr_SetString(PyExc_OSError, "getsockaddrarg: "
"wrong format");
return 0;
}
if (setbdaddr(straddr, &_BT_RC_MEMB(addr, bdaddr)) < 0)
return 0;
*len_ret = sizeof *addr;
return 1;
}
case BTPROTO_HCI:
{
struct sockaddr_hci *addr = (struct sockaddr_hci *)addr_ret;
#if defined(__NetBSD__) || defined(__DragonFly__)
char *straddr = PyBytes_AS_STRING(args);
_BT_HCI_MEMB(addr, family) = AF_BLUETOOTH;
if (straddr == NULL) {
PyErr_SetString(PyExc_OSError, "getsockaddrarg: "
"wrong format");
return 0;
}
if (setbdaddr(straddr, &_BT_HCI_MEMB(addr, bdaddr)) < 0)
return 0;
#else
_BT_HCI_MEMB(addr, family) = AF_BLUETOOTH;
if (!PyArg_ParseTuple(args, "i", &_BT_HCI_MEMB(addr, dev))) {
PyErr_SetString(PyExc_OSError, "getsockaddrarg: "
"wrong format");
return 0;
}
#endif
*len_ret = sizeof *addr;
return 1;
}
#if !defined(__FreeBSD__)
case BTPROTO_SCO:
{
struct sockaddr_sco *addr;
char *straddr;
addr = (struct sockaddr_sco *)addr_ret;
_BT_SCO_MEMB(addr, family) = AF_BLUETOOTH;
if (!PyBytes_Check(args)) {
PyErr_SetString(PyExc_OSError, "getsockaddrarg: "
"wrong format");
return 0;
}
straddr = PyBytes_AS_STRING(args);
if (setbdaddr(straddr, &_BT_SCO_MEMB(addr, bdaddr)) < 0)
return 0;
*len_ret = sizeof *addr;
return 1;
}
#endif
default:
PyErr_SetString(PyExc_OSError, "getsockaddrarg: unknown Bluetooth protocol");
return 0;
}
}
#endif
#if defined(HAVE_NETPACKET_PACKET_H) && defined(SIOCGIFINDEX)
case AF_PACKET:
{
struct sockaddr_ll* addr;
struct ifreq ifr;
char *interfaceName;
int protoNumber;
int hatype = 0;
int pkttype = 0;
char *haddr = NULL;
unsigned int halen = 0;
if (!PyTuple_Check(args)) {
PyErr_Format(
PyExc_TypeError,
"getsockaddrarg: "
"AF_PACKET address must be tuple, not %.500s",
Py_TYPE(args)->tp_name);
return 0;
}
if (!PyArg_ParseTuple(args, "si|iiy#", &interfaceName,
&protoNumber, &pkttype, &hatype,
&haddr, &halen))
return 0;
strncpy(ifr.ifr_name, interfaceName, sizeof(ifr.ifr_name));
ifr.ifr_name[(sizeof(ifr.ifr_name))-1] = '\0';
if (ioctl(s->sock_fd, SIOCGIFINDEX, &ifr) < 0) {
s->errorhandler();
return 0;
}
if (halen > 8) {
PyErr_SetString(PyExc_ValueError,
"Hardware address must be 8 bytes or less");
return 0;
}
if (protoNumber < 0 || protoNumber > 0xffff) {
PyErr_SetString(
PyExc_OverflowError,
"getsockaddrarg: protoNumber must be 0-65535.");
return 0;
}
addr = (struct sockaddr_ll*)addr_ret;
addr->sll_family = AF_PACKET;
addr->sll_protocol = htons((short)protoNumber);
addr->sll_ifindex = ifr.ifr_ifindex;
addr->sll_pkttype = pkttype;
addr->sll_hatype = hatype;
if (halen != 0) {
memcpy(&addr->sll_addr, haddr, halen);
}
addr->sll_halen = halen;
*len_ret = sizeof *addr;
return 1;
}
#endif
#ifdef HAVE_LINUX_TIPC_H
case AF_TIPC:
{
unsigned int atype, v1, v2, v3;
unsigned int scope = TIPC_CLUSTER_SCOPE;
struct sockaddr_tipc *addr;
if (!PyTuple_Check(args)) {
PyErr_Format(
PyExc_TypeError,
"getsockaddrarg: "
"AF_TIPC address must be tuple, not %.500s",
Py_TYPE(args)->tp_name);
return 0;
}
if (!PyArg_ParseTuple(args,
"IIII|I;Invalid TIPC address format",
&atype, &v1, &v2, &v3, &scope))
return 0;
addr = (struct sockaddr_tipc *) addr_ret;
memset(addr, 0, sizeof(struct sockaddr_tipc));
addr->family = AF_TIPC;
addr->scope = scope;
addr->addrtype = atype;
if (atype == TIPC_ADDR_NAMESEQ) {
addr->addr.nameseq.type = v1;
addr->addr.nameseq.lower = v2;
addr->addr.nameseq.upper = v3;
} else if (atype == TIPC_ADDR_NAME) {
addr->addr.name.name.type = v1;
addr->addr.name.name.instance = v2;
} else if (atype == TIPC_ADDR_ID) {
addr->addr.id.node = v1;
addr->addr.id.ref = v2;
} else {
/* Shouldn't happen */
PyErr_SetString(PyExc_TypeError, "Invalid address type");
return 0;
}
*len_ret = sizeof(*addr);
return 1;
}
#endif
#ifdef AF_CAN
case AF_CAN:
switch (s->sock_proto) {
case CAN_RAW:
{
struct sockaddr_can *addr;
PyObject *interfaceName;
struct ifreq ifr;
addr = (struct sockaddr_can *)addr_ret;
Py_ssize_t len;
if (!PyArg_ParseTuple(args, "O&", PyUnicode_FSConverter,
&interfaceName))
return 0;
len = PyBytes_GET_SIZE(interfaceName);
if (len == 0) {
ifr.ifr_ifindex = 0;
} else if (len < sizeof(ifr.ifr_name)) {
strncpy(ifr.ifr_name, PyBytes_AS_STRING(interfaceName), sizeof(ifr.ifr_name));
ifr.ifr_name[(sizeof(ifr.ifr_name))-1] = '\0';
if (ioctl(s->sock_fd, SIOCGIFINDEX, &ifr) < 0) {
s->errorhandler();
Py_DECREF(interfaceName);
return 0;
}
} else {
PyErr_SetString(PyExc_OSError,
"AF_CAN interface name too long");
Py_DECREF(interfaceName);
return 0;
}
addr->can_family = AF_CAN;
addr->can_ifindex = ifr.ifr_ifindex;
*len_ret = sizeof(*addr);
Py_DECREF(interfaceName);
return 1;
}
default:
PyErr_SetString(PyExc_OSError,
"getsockaddrarg: unsupported CAN protocol");
return 0;
}
#endif
#ifdef PF_SYSTEM
case PF_SYSTEM:
switch (s->sock_proto) {
#ifdef SYSPROTO_CONTROL
case SYSPROTO_CONTROL:
{
struct sockaddr_ctl *addr;
addr = (struct sockaddr_ctl *)addr_ret;
addr->sc_family = AF_SYSTEM;
addr->ss_sysaddr = AF_SYS_CONTROL;
if (PyUnicode_Check(args)) {
struct ctl_info info;
PyObject *ctl_name;
if (!PyArg_Parse(args, "O&",
PyUnicode_FSConverter, &ctl_name)) {
return 0;
}
if (PyBytes_GET_SIZE(ctl_name) > sizeof(info.ctl_name)) {
PyErr_SetString(PyExc_ValueError,
"provided string is too long");
Py_DECREF(ctl_name);
return 0;
}
strncpy(info.ctl_name, PyBytes_AS_STRING(ctl_name),
sizeof(info.ctl_name));
Py_DECREF(ctl_name);
if (ioctl(s->sock_fd, CTLIOCGINFO, &info)) {
PyErr_SetString(PyExc_OSError,
"cannot find kernel control with provided name");
return 0;
}
addr->sc_id = info.ctl_id;
addr->sc_unit = 0;
} else if (!PyArg_ParseTuple(args, "II",
&(addr->sc_id), &(addr->sc_unit))) {
PyErr_SetString(PyExc_TypeError, "getsockaddrarg: "
"expected str or tuple of two ints");
return 0;
}
*len_ret = sizeof(*addr);
return 1;
}
#endif
default:
PyErr_SetString(PyExc_OSError,
"getsockaddrarg: unsupported PF_SYSTEM protocol");
return 0;
}
#endif
/* More cases here... */
default:
PyErr_SetString(PyExc_OSError, "getsockaddrarg: bad family");
return 0;
}
}
/* Get the address length according to the socket object's address family.
Return 1 if the family is known, 0 otherwise. The length is returned
through len_ret. */
static int
getsockaddrlen(PySocketSockObject *s, socklen_t *len_ret)
{
switch (s->sock_family) {
#if defined(AF_UNIX)
case AF_UNIX:
{
*len_ret = sizeof (struct sockaddr_un);
return 1;
}
#endif /* AF_UNIX */
#if defined(AF_NETLINK)
case AF_NETLINK:
{
*len_ret = sizeof (struct sockaddr_nl);
return 1;
}
#endif
#ifdef AF_RDS
case AF_RDS:
/* RDS sockets use sockaddr_in: fall-through */
#endif
case AF_INET:
{
*len_ret = sizeof (struct sockaddr_in);
return 1;
}
#ifdef ENABLE_IPV6
case AF_INET6:
{
*len_ret = sizeof (struct sockaddr_in6);
return 1;
}
#endif
#ifdef USE_BLUETOOTH
case AF_BLUETOOTH:
{
switch(s->sock_proto)
{
case BTPROTO_L2CAP:
*len_ret = sizeof (struct sockaddr_l2);
return 1;
case BTPROTO_RFCOMM:
*len_ret = sizeof (struct sockaddr_rc);
return 1;
case BTPROTO_HCI:
*len_ret = sizeof (struct sockaddr_hci);
return 1;
#if !defined(__FreeBSD__)
case BTPROTO_SCO:
*len_ret = sizeof (struct sockaddr_sco);
return 1;
#endif
default:
PyErr_SetString(PyExc_OSError, "getsockaddrlen: "
"unknown BT protocol");
return 0;
}
}
#endif
#ifdef HAVE_NETPACKET_PACKET_H
case AF_PACKET:
{
*len_ret = sizeof (struct sockaddr_ll);
return 1;
}
#endif
#ifdef HAVE_LINUX_TIPC_H
case AF_TIPC:
{
*len_ret = sizeof (struct sockaddr_tipc);
return 1;
}
#endif
#ifdef AF_CAN
case AF_CAN:
{
*len_ret = sizeof (struct sockaddr_can);
return 1;
}
#endif
#ifdef PF_SYSTEM
case PF_SYSTEM:
switch(s->sock_proto) {
#ifdef SYSPROTO_CONTROL
case SYSPROTO_CONTROL:
*len_ret = sizeof (struct sockaddr_ctl);
return 1;
#endif
default:
PyErr_SetString(PyExc_OSError, "getsockaddrlen: "
"unknown PF_SYSTEM protocol");
return 0;
}
#endif
/* More cases here... */
default:
PyErr_SetString(PyExc_OSError, "getsockaddrlen: bad family");
return 0;
}
}
/* Support functions for the sendmsg() and recvmsg[_into]() methods.
Currently, these methods are only compiled if the RFC 2292/3542
CMSG_LEN() macro is available. Older systems seem to have used
sizeof(struct cmsghdr) + (length) where CMSG_LEN() is used now, so
it may be possible to define CMSG_LEN() that way if it's not
provided. Some architectures might need extra padding after the
cmsghdr, however, and CMSG_LEN() would have to take account of
this. */
#ifdef CMSG_LEN
/* If length is in range, set *result to CMSG_LEN(length) and return
true; otherwise, return false. */
static int
get_CMSG_LEN(size_t length, size_t *result)
{
size_t tmp;
if (length > (SOCKLEN_T_LIMIT - CMSG_LEN(0)))
return 0;
tmp = CMSG_LEN(length);
if (tmp > SOCKLEN_T_LIMIT || tmp < length)
return 0;
*result = tmp;
return 1;
}
#ifdef CMSG_SPACE
/* If length is in range, set *result to CMSG_SPACE(length) and return
true; otherwise, return false. */
static int
get_CMSG_SPACE(size_t length, size_t *result)
{
size_t tmp;
/* Use CMSG_SPACE(1) here in order to take account of the padding
necessary before *and* after the data. */
if (length > (SOCKLEN_T_LIMIT - CMSG_SPACE(1)))
return 0;
tmp = CMSG_SPACE(length);
if (tmp > SOCKLEN_T_LIMIT || tmp < length)
return 0;
*result = tmp;
return 1;
}
#endif
/* Return true iff msg->msg_controllen is valid, cmsgh is a valid
pointer in msg->msg_control with at least "space" bytes after it,
and its cmsg_len member inside the buffer. */
static int
cmsg_min_space(struct msghdr *msg, struct cmsghdr *cmsgh, size_t space)
{
size_t cmsg_offset;
static const size_t cmsg_len_end = (offsetof(struct cmsghdr, cmsg_len) +
sizeof(cmsgh->cmsg_len));
/* Note that POSIX allows msg_controllen to be of signed type. */
if (cmsgh == NULL || msg->msg_control == NULL || msg->msg_controllen < 0)
return 0;
if (space < cmsg_len_end)
space = cmsg_len_end;
cmsg_offset = (char *)cmsgh - (char *)msg->msg_control;
return (cmsg_offset <= (size_t)-1 - space &&
cmsg_offset + space <= msg->msg_controllen);
}
/* If pointer CMSG_DATA(cmsgh) is in buffer msg->msg_control, set
*space to number of bytes following it in the buffer and return
true; otherwise, return false. Assumes cmsgh, msg->msg_control and
msg->msg_controllen are valid. */
static int
get_cmsg_data_space(struct msghdr *msg, struct cmsghdr *cmsgh, size_t *space)
{
size_t data_offset;
char *data_ptr;
if ((data_ptr = (char *)CMSG_DATA(cmsgh)) == NULL)
return 0;
data_offset = data_ptr - (char *)msg->msg_control;
if (data_offset > msg->msg_controllen)
return 0;
*space = msg->msg_controllen - data_offset;
return 1;
}
/* If cmsgh is invalid or not contained in the buffer pointed to by
msg->msg_control, return -1. If cmsgh is valid and its associated
data is entirely contained in the buffer, set *data_len to the
length of the associated data and return 0. If only part of the
associated data is contained in the buffer but cmsgh is otherwise
valid, set *data_len to the length contained in the buffer and
return 1. */
static int
get_cmsg_data_len(struct msghdr *msg, struct cmsghdr *cmsgh, size_t *data_len)
{
size_t space, cmsg_data_len;
if (!cmsg_min_space(msg, cmsgh, CMSG_LEN(0)) ||
cmsgh->cmsg_len < CMSG_LEN(0))
return -1;
cmsg_data_len = cmsgh->cmsg_len - CMSG_LEN(0);
if (!get_cmsg_data_space(msg, cmsgh, &space))
return -1;
if (space >= cmsg_data_len) {
*data_len = cmsg_data_len;
return 0;
}
*data_len = space;
return 1;
}
#endif /* CMSG_LEN */
/* s._accept() -> (fd, address) */
static PyObject *
sock_accept(PySocketSockObject *s)
{
sock_addr_t addrbuf;
SOCKET_T newfd = INVALID_SOCKET;
socklen_t addrlen;
PyObject *sock = NULL;
PyObject *addr = NULL;
PyObject *res = NULL;
int timeout;
if (!getsockaddrlen(s, &addrlen))
return NULL;
memset(&addrbuf, 0, addrlen);
if (!IS_SELECTABLE(s))
return select_error();
BEGIN_SELECT_LOOP(s)
Py_BEGIN_ALLOW_THREADS
timeout = internal_select_ex(s, 0, interval);
if (!timeout) {
newfd = accept(s->sock_fd, SAS2SA(&addrbuf), &addrlen);
}
Py_END_ALLOW_THREADS
if (timeout == 1) {
PyErr_SetString(socket_timeout, "timed out");
return NULL;
}
END_SELECT_LOOP(s)
if (newfd == INVALID_SOCKET)
return s->errorhandler();
sock = PyLong_FromSocket_t(newfd);
if (sock == NULL) {
SOCKETCLOSE(newfd);
goto finally;
}
addr = makesockaddr(s->sock_fd, SAS2SA(&addrbuf),
addrlen, s->sock_proto);
if (addr == NULL)
goto finally;
res = PyTuple_Pack(2, sock, addr);
finally:
Py_XDECREF(sock);
Py_XDECREF(addr);
return res;
}
PyDoc_STRVAR(accept_doc,
"_accept() -> (integer, address info)\n\
\n\
Wait for an incoming connection. Return a new socket file descriptor\n\
representing the connection, and the address of the client.\n\
For IP sockets, the address info is a pair (hostaddr, port).");
/* s.setblocking(flag) method. Argument:
False -- non-blocking mode; same as settimeout(0)
True -- blocking mode; same as settimeout(None)
*/
static PyObject *
sock_setblocking(PySocketSockObject *s, PyObject *arg)
{
long block;
block = PyLong_AsLong(arg);
if (block == -1 && PyErr_Occurred())
return NULL;
s->sock_timeout = block ? -1.0 : 0.0;
internal_setblocking(s, block);
Py_INCREF(Py_None);
return Py_None;
}
PyDoc_STRVAR(setblocking_doc,
"setblocking(flag)\n\
\n\
Set the socket to blocking (flag is true) or non-blocking (false).\n\
setblocking(True) is equivalent to settimeout(None);\n\
setblocking(False) is equivalent to settimeout(0.0).");
/* s.settimeout(timeout) method. Argument:
None -- no timeout, blocking mode; same as setblocking(True)
0.0 -- non-blocking mode; same as setblocking(False)
> 0 -- timeout mode; operations time out after timeout seconds
< 0 -- illegal; raises an exception
*/
static PyObject *
sock_settimeout(PySocketSockObject *s, PyObject *arg)
{
double timeout;
if (arg == Py_None)
timeout = -1.0;
else {
timeout = PyFloat_AsDouble(arg);
if (timeout < 0.0) {
if (!PyErr_Occurred())
PyErr_SetString(PyExc_ValueError,
"Timeout value out of range");
return NULL;
}
}
s->sock_timeout = timeout;
internal_setblocking(s, timeout < 0.0);
Py_INCREF(Py_None);
return Py_None;
}
PyDoc_STRVAR(settimeout_doc,
"settimeout(timeout)\n\
\n\
Set a timeout on socket operations. 'timeout' can be a float,\n\
giving in seconds, or None. Setting a timeout of None disables\n\
the timeout feature and is equivalent to setblocking(1).\n\
Setting a timeout of zero is the same as setblocking(0).");
/* s.gettimeout() method.
Returns the timeout associated with a socket. */
static PyObject *
sock_gettimeout(PySocketSockObject *s)
{
if (s->sock_timeout < 0.0) {
Py_INCREF(Py_None);
return Py_None;
}
else
return PyFloat_FromDouble(s->sock_timeout);
}
PyDoc_STRVAR(gettimeout_doc,
"gettimeout() -> timeout\n\
\n\
Returns the timeout in seconds (float) associated with socket \n\
operations. A timeout of None indicates that timeouts on socket \n\
operations are disabled.");
/* s.setsockopt() method.
With an integer third argument, sets an integer option.
With a string third argument, sets an option from a buffer;
use optional built-in module 'struct' to encode the string. */
static PyObject *
sock_setsockopt(PySocketSockObject *s, PyObject *args)
{
int level;
int optname;
int res;
char *buf;
int buflen;
int flag;
if (PyArg_ParseTuple(args, "iii:setsockopt",
&level, &optname, &flag)) {
buf = (char *) &flag;
buflen = sizeof flag;
}
else {
PyErr_Clear();
if (!PyArg_ParseTuple(args, "iiy#:setsockopt",
&level, &optname, &buf, &buflen))
return NULL;
}
res = setsockopt(s->sock_fd, level, optname, (void *)buf, buflen);
if (res < 0)
return s->errorhandler();
Py_INCREF(Py_None);
return Py_None;
}
PyDoc_STRVAR(setsockopt_doc,
"setsockopt(level, option, value)\n\
\n\
Set a socket option. See the Unix manual for level and option.\n\
The value argument can either be an integer or a string.");
/* s.getsockopt() method.
With two arguments, retrieves an integer option.
With a third integer argument, retrieves a string buffer of that size;
use optional built-in module 'struct' to decode the string. */
static PyObject *
sock_getsockopt(PySocketSockObject *s, PyObject *args)
{
int level;
int optname;
int res;
PyObject *buf;
socklen_t buflen = 0;
if (!PyArg_ParseTuple(args, "ii|i:getsockopt",
&level, &optname, &buflen))
return NULL;
if (buflen == 0) {
int flag = 0;
socklen_t flagsize = sizeof flag;
res = getsockopt(s->sock_fd, level, optname,
(void *)&flag, &flagsize);
if (res < 0)
return s->errorhandler();
return PyLong_FromLong(flag);
}
#ifdef __VMS
/* socklen_t is unsigned so no negative test is needed,
test buflen == 0 is previously done */
if (buflen > 1024) {
#else
if (buflen <= 0 || buflen > 1024) {
#endif
PyErr_SetString(PyExc_OSError,
"getsockopt buflen out of range");
return NULL;
}
buf = PyBytes_FromStringAndSize((char *)NULL, buflen);
if (buf == NULL)
return NULL;
res = getsockopt(s->sock_fd, level, optname,
(void *)PyBytes_AS_STRING(buf), &buflen);
if (res < 0) {
Py_DECREF(buf);
return s->errorhandler();
}
_PyBytes_Resize(&buf, buflen);
return buf;
}
PyDoc_STRVAR(getsockopt_doc,
"getsockopt(level, option[, buffersize]) -> value\n\
\n\
Get a socket option. See the Unix manual for level and option.\n\
If a nonzero buffersize argument is given, the return value is a\n\
string of that length; otherwise it is an integer.");
/* s.bind(sockaddr) method */
static PyObject *
sock_bind(PySocketSockObject *s, PyObject *addro)
{
sock_addr_t addrbuf;
int addrlen;
int res;
if (!getsockaddrarg(s, addro, SAS2SA(&addrbuf), &addrlen))
return NULL;
Py_BEGIN_ALLOW_THREADS
res = bind(s->sock_fd, SAS2SA(&addrbuf), addrlen);
Py_END_ALLOW_THREADS
if (res < 0)
return s->errorhandler();
Py_INCREF(Py_None);
return Py_None;
}
PyDoc_STRVAR(bind_doc,
"bind(address)\n\
\n\
Bind the socket to a local address. For IP sockets, the address is a\n\
pair (host, port); the host must refer to the local host. For raw packet\n\
sockets the address is a tuple (ifname, proto [,pkttype [,hatype]])");
/* s.close() method.
Set the file descriptor to -1 so operations tried subsequently
will surely fail. */
static PyObject *
sock_close(PySocketSockObject *s)
{
SOCKET_T fd;
if ((fd = s->sock_fd) != -1) {
s->sock_fd = -1;
Py_BEGIN_ALLOW_THREADS
(void) SOCKETCLOSE(fd);
Py_END_ALLOW_THREADS
}
Py_INCREF(Py_None);
return Py_None;
}
PyDoc_STRVAR(close_doc,
"close()\n\
\n\
Close the socket. It cannot be used after this call.");
static PyObject *
sock_detach(PySocketSockObject *s)
{
SOCKET_T fd = s->sock_fd;
s->sock_fd = -1;
return PyLong_FromSocket_t(fd);
}
PyDoc_STRVAR(detach_doc,
"detach()\n\
\n\
Close the socket object without closing the underlying file descriptor.\
The object cannot be used after this call, but the file descriptor\
can be reused for other purposes. The file descriptor is returned.");
static int
internal_connect(PySocketSockObject *s, struct sockaddr *addr, int addrlen,
int *timeoutp)
{
int res, timeout;
timeout = 0;
res = connect(s->sock_fd, addr, addrlen);
#ifdef MS_WINDOWS
if (s->sock_timeout > 0.0) {
if (res < 0 && WSAGetLastError() == WSAEWOULDBLOCK &&
IS_SELECTABLE(s)) {
/* This is a mess. Best solution: trust select */
fd_set fds;
fd_set fds_exc;
struct timeval tv;
tv.tv_sec = (int)s->sock_timeout;
tv.tv_usec = (int)((s->sock_timeout - tv.tv_sec) * 1e6);
FD_ZERO(&fds);
FD_SET(s->sock_fd, &fds);
FD_ZERO(&fds_exc);
FD_SET(s->sock_fd, &fds_exc);
res = select(Py_SAFE_DOWNCAST(s->sock_fd+1, SOCKET_T, int),
NULL, &fds, &fds_exc, &tv);
if (res == 0) {
res = WSAEWOULDBLOCK;
timeout = 1;
} else if (res > 0) {
if (FD_ISSET(s->sock_fd, &fds))
/* The socket is in the writable set - this
means connected */
res = 0;
else {
/* As per MS docs, we need to call getsockopt()
to get the underlying error */
int res_size = sizeof res;
/* It must be in the exception set */
assert(FD_ISSET(s->sock_fd, &fds_exc));
if (0 == getsockopt(s->sock_fd, SOL_SOCKET, SO_ERROR,
(char *)&res, &res_size))
/* getsockopt also clears WSAGetLastError,
so reset it back. */
WSASetLastError(res);
else
res = WSAGetLastError();
}
}
/* else if (res < 0) an error occurred */
}
}
if (res < 0)
res = WSAGetLastError();
#else
if (s->sock_timeout > 0.0) {
if (res < 0 && errno == EINPROGRESS && IS_SELECTABLE(s)) {
timeout = internal_select(s, 1);
if (timeout == 0) {
/* Bug #1019808: in case of an EINPROGRESS,
use getsockopt(SO_ERROR) to get the real
error. */
socklen_t res_size = sizeof res;
(void)getsockopt(s->sock_fd, SOL_SOCKET,
SO_ERROR, &res, &res_size);
if (res == EISCONN)
res = 0;
errno = res;
}
else if (timeout == -1) {
res = errno; /* had error */
}
else
res = EWOULDBLOCK; /* timed out */
}
}
if (res < 0)
res = errno;
#endif
*timeoutp = timeout;
return res;
}
/* s.connect(sockaddr) method */
static PyObject *
sock_connect(PySocketSockObject *s, PyObject *addro)
{
sock_addr_t addrbuf;
int addrlen;
int res;
int timeout;
if (!getsockaddrarg(s, addro, SAS2SA(&addrbuf), &addrlen))
return NULL;
Py_BEGIN_ALLOW_THREADS
res = internal_connect(s, SAS2SA(&addrbuf), addrlen, &timeout);
Py_END_ALLOW_THREADS
if (timeout == 1) {
PyErr_SetString(socket_timeout, "timed out");
return NULL;
}
if (res != 0)
return s->errorhandler();
Py_INCREF(Py_None);
return Py_None;
}
PyDoc_STRVAR(connect_doc,
"connect(address)\n\
\n\
Connect the socket to a remote address. For IP sockets, the address\n\
is a pair (host, port).");
/* s.connect_ex(sockaddr) method */
static PyObject *
sock_connect_ex(PySocketSockObject *s, PyObject *addro)
{
sock_addr_t addrbuf;
int addrlen;
int res;
int timeout;
if (!getsockaddrarg(s, addro, SAS2SA(&addrbuf), &addrlen))
return NULL;
Py_BEGIN_ALLOW_THREADS
res = internal_connect(s, SAS2SA(&addrbuf), addrlen, &timeout);
Py_END_ALLOW_THREADS
/* Signals are not errors (though they may raise exceptions). Adapted
from PyErr_SetFromErrnoWithFilenameObject(). */
#ifdef EINTR
if (res == EINTR && PyErr_CheckSignals())
return NULL;
#endif
return PyLong_FromLong((long) res);
}
PyDoc_STRVAR(connect_ex_doc,
"connect_ex(address) -> errno\n\
\n\
This is like connect(address), but returns an error code (the errno value)\n\
instead of raising an exception when an error occurs.");
/* s.fileno() method */
static PyObject *
sock_fileno(PySocketSockObject *s)
{
return PyLong_FromSocket_t(s->sock_fd);
}
PyDoc_STRVAR(fileno_doc,
"fileno() -> integer\n\
\n\
Return the integer file descriptor of the socket.");
/* s.getsockname() method */
static PyObject *
sock_getsockname(PySocketSockObject *s)
{
sock_addr_t addrbuf;
int res;
socklen_t addrlen;
if (!getsockaddrlen(s, &addrlen))
return NULL;
memset(&addrbuf, 0, addrlen);
Py_BEGIN_ALLOW_THREADS
res = getsockname(s->sock_fd, SAS2SA(&addrbuf), &addrlen);
Py_END_ALLOW_THREADS
if (res < 0)
return s->errorhandler();
return makesockaddr(s->sock_fd, SAS2SA(&addrbuf), addrlen,
s->sock_proto);
}
PyDoc_STRVAR(getsockname_doc,
"getsockname() -> address info\n\
\n\
Return the address of the local endpoint. For IP sockets, the address\n\
info is a pair (hostaddr, port).");
#ifdef HAVE_GETPEERNAME /* Cray APP doesn't have this :-( */
/* s.getpeername() method */
static PyObject *
sock_getpeername(PySocketSockObject *s)
{
sock_addr_t addrbuf;
int res;
socklen_t addrlen;
if (!getsockaddrlen(s, &addrlen))
return NULL;
memset(&addrbuf, 0, addrlen);
Py_BEGIN_ALLOW_THREADS
res = getpeername(s->sock_fd, SAS2SA(&addrbuf), &addrlen);
Py_END_ALLOW_THREADS
if (res < 0)
return s->errorhandler();
return makesockaddr(s->sock_fd, SAS2SA(&addrbuf), addrlen,
s->sock_proto);
}
PyDoc_STRVAR(getpeername_doc,
"getpeername() -> address info\n\
\n\
Return the address of the remote endpoint. For IP sockets, the address\n\
info is a pair (hostaddr, port).");
#endif /* HAVE_GETPEERNAME */
/* s.listen(n) method */
static PyObject *
sock_listen(PySocketSockObject *s, PyObject *arg)
{
int backlog;
int res;
backlog = _PyLong_AsInt(arg);
if (backlog == -1 && PyErr_Occurred())
return NULL;
Py_BEGIN_ALLOW_THREADS
/* To avoid problems on systems that don't allow a negative backlog
* (which doesn't make sense anyway) we force a minimum value of 0. */
if (backlog < 0)
backlog = 0;
res = listen(s->sock_fd, backlog);
Py_END_ALLOW_THREADS
if (res < 0)
return s->errorhandler();
Py_INCREF(Py_None);
return Py_None;
}
PyDoc_STRVAR(listen_doc,
"listen(backlog)\n\
\n\
Enable a server to accept connections. The backlog argument must be at\n\
least 0 (if it is lower, it is set to 0); it specifies the number of\n\
unaccepted connections that the system will allow before refusing new\n\
connections.");
/*
* This is the guts of the recv() and recv_into() methods, which reads into a
* char buffer. If you have any inc/dec ref to do to the objects that contain
* the buffer, do it in the caller. This function returns the number of bytes
* successfully read. If there was an error, it returns -1. Note that it is
* also possible that we return a number of bytes smaller than the request
* bytes.
*/
static Py_ssize_t
sock_recv_guts(PySocketSockObject *s, char* cbuf, Py_ssize_t len, int flags)
{
Py_ssize_t outlen = -1;
int timeout;
#ifdef __VMS
int remaining;
char *read_buf;
#endif
if (!IS_SELECTABLE(s)) {
select_error();
return -1;
}
if (len == 0) {
/* If 0 bytes were requested, do nothing. */
return 0;
}
#ifndef __VMS
BEGIN_SELECT_LOOP(s)
Py_BEGIN_ALLOW_THREADS
timeout = internal_select_ex(s, 0, interval);
if (!timeout)
outlen = recv(s->sock_fd, cbuf, len, flags);
Py_END_ALLOW_THREADS
if (timeout == 1) {
PyErr_SetString(socket_timeout, "timed out");
return -1;
}
END_SELECT_LOOP(s)
if (outlen < 0) {
/* Note: the call to errorhandler() ALWAYS indirectly returned
NULL, so ignore its return value */
s->errorhandler();
return -1;
}
#else
read_buf = cbuf;
remaining = len;
while (remaining != 0) {
unsigned int segment;
int nread = -1;
segment = remaining /SEGMENT_SIZE;
if (segment != 0) {
segment = SEGMENT_SIZE;
}
else {
segment = remaining;
}
BEGIN_SELECT_LOOP(s)
Py_BEGIN_ALLOW_THREADS
timeout = internal_select_ex(s, 0, interval);
if (!timeout)
nread = recv(s->sock_fd, read_buf, segment, flags);
Py_END_ALLOW_THREADS
if (timeout == 1) {
PyErr_SetString(socket_timeout, "timed out");
return -1;
}
END_SELECT_LOOP(s)
if (nread < 0) {
s->errorhandler();
return -1;
}
if (nread != remaining) {
read_buf += nread;
break;
}
remaining -= segment;
read_buf += segment;
}
outlen = read_buf - cbuf;
#endif /* !__VMS */
return outlen;
}
/* s.recv(nbytes [,flags]) method */
static PyObject *
sock_recv(PySocketSockObject *s, PyObject *args)
{
Py_ssize_t recvlen, outlen;
int flags = 0;
PyObject *buf;
if (!PyArg_ParseTuple(args, "n|i:recv", &recvlen, &flags))
return NULL;
if (recvlen < 0) {
PyErr_SetString(PyExc_ValueError,
"negative buffersize in recv");
return NULL;
}
/* Allocate a new string. */
buf = PyBytes_FromStringAndSize((char *) 0, recvlen);
if (buf == NULL)
return NULL;
/* Call the guts */
outlen = sock_recv_guts(s, PyBytes_AS_STRING(buf), recvlen, flags);
if (outlen < 0) {
/* An error occurred, release the string and return an
error. */
Py_DECREF(buf);
return NULL;
}
if (outlen != recvlen) {
/* We did not read as many bytes as we anticipated, resize the
string if possible and be successful. */
_PyBytes_Resize(&buf, outlen);
}
return buf;
}
PyDoc_STRVAR(recv_doc,
"recv(buffersize[, flags]) -> data\n\
\n\
Receive up to buffersize bytes from the socket. For the optional flags\n\
argument, see the Unix manual. When no data is available, block until\n\
at least one byte is available or until the remote end is closed. When\n\
the remote end is closed and all data is read, return the empty string.");
/* s.recv_into(buffer, [nbytes [,flags]]) method */
static PyObject*
sock_recv_into(PySocketSockObject *s, PyObject *args, PyObject *kwds)
{
static char *kwlist[] = {"buffer", "nbytes", "flags", 0};
int flags = 0;
Py_buffer pbuf;
char *buf;
Py_ssize_t buflen, readlen, recvlen = 0;
/* Get the buffer's memory */
if (!PyArg_ParseTupleAndKeywords(args, kwds, "w*|ni:recv_into", kwlist,
&pbuf, &recvlen, &flags))
return NULL;
buf = pbuf.buf;
buflen = pbuf.len;
if (recvlen < 0) {
PyBuffer_Release(&pbuf);
PyErr_SetString(PyExc_ValueError,
"negative buffersize in recv_into");
return NULL;
}
if (recvlen == 0) {
/* If nbytes was not specified, use the buffer's length */
recvlen = buflen;
}
/* Check if the buffer is large enough */
if (buflen < recvlen) {
PyBuffer_Release(&pbuf);
PyErr_SetString(PyExc_ValueError,
"buffer too small for requested bytes");
return NULL;
}
/* Call the guts */
readlen = sock_recv_guts(s, buf, recvlen, flags);
if (readlen < 0) {
/* Return an error. */
PyBuffer_Release(&pbuf);
return NULL;
}
PyBuffer_Release(&pbuf);
/* Return the number of bytes read. Note that we do not do anything
special here in the case that readlen < recvlen. */
return PyLong_FromSsize_t(readlen);
}
PyDoc_STRVAR(recv_into_doc,
"recv_into(buffer, [nbytes[, flags]]) -> nbytes_read\n\
\n\
A version of recv() that stores its data into a buffer rather than creating \n\
a new string. Receive up to buffersize bytes from the socket. If buffersize \n\
is not specified (or 0), receive up to the size available in the given buffer.\n\
\n\
See recv() for documentation about the flags.");
/*
* This is the guts of the recvfrom() and recvfrom_into() methods, which reads
* into a char buffer. If you have any inc/def ref to do to the objects that
* contain the buffer, do it in the caller. This function returns the number
* of bytes successfully read. If there was an error, it returns -1. Note
* that it is also possible that we return a number of bytes smaller than the
* request bytes.
*
* 'addr' is a return value for the address object. Note that you must decref
* it yourself.
*/
static Py_ssize_t
sock_recvfrom_guts(PySocketSockObject *s, char* cbuf, Py_ssize_t len, int flags,
PyObject** addr)
{
sock_addr_t addrbuf;
int timeout;
Py_ssize_t n = -1;
socklen_t addrlen;
*addr = NULL;
if (!getsockaddrlen(s, &addrlen))
return -1;
if (!IS_SELECTABLE(s)) {
select_error();
return -1;
}
BEGIN_SELECT_LOOP(s)
Py_BEGIN_ALLOW_THREADS
memset(&addrbuf, 0, addrlen);
timeout = internal_select_ex(s, 0, interval);
if (!timeout) {
#ifndef MS_WINDOWS
#if defined(PYOS_OS2) && !defined(PYCC_GCC)
n = recvfrom(s->sock_fd, cbuf, len, flags,
SAS2SA(&addrbuf), &addrlen);
#else
n = recvfrom(s->sock_fd, cbuf, len, flags,
(void *) &addrbuf, &addrlen);
#endif
#else
n = recvfrom(s->sock_fd, cbuf, len, flags,
SAS2SA(&addrbuf), &addrlen);
#endif
}
Py_END_ALLOW_THREADS
if (timeout == 1) {
PyErr_SetString(socket_timeout, "timed out");
return -1;
}
END_SELECT_LOOP(s)
if (n < 0) {
s->errorhandler();
return -1;
}
if (!(*addr = makesockaddr(s->sock_fd, SAS2SA(&addrbuf),
addrlen, s->sock_proto)))
return -1;
return n;
}
/* s.recvfrom(nbytes [,flags]) method */
static PyObject *
sock_recvfrom(PySocketSockObject *s, PyObject *args)
{
PyObject *buf = NULL;
PyObject *addr = NULL;
PyObject *ret = NULL;
int flags = 0;
Py_ssize_t recvlen, outlen;
if (!PyArg_ParseTuple(args, "n|i:recvfrom", &recvlen, &flags))
return NULL;
if (recvlen < 0) {
PyErr_SetString(PyExc_ValueError,
"negative buffersize in recvfrom");
return NULL;
}
buf = PyBytes_FromStringAndSize((char *) 0, recvlen);
if (buf == NULL)
return NULL;
outlen = sock_recvfrom_guts(s, PyBytes_AS_STRING(buf),
recvlen, flags, &addr);
if (outlen < 0) {
goto finally;
}
if (outlen != recvlen) {
/* We did not read as many bytes as we anticipated, resize the
string if possible and be successful. */
if (_PyBytes_Resize(&buf, outlen) < 0)
/* Oopsy, not so successful after all. */
goto finally;
}
ret = PyTuple_Pack(2, buf, addr);
finally:
Py_XDECREF(buf);
Py_XDECREF(addr);
return ret;
}
PyDoc_STRVAR(recvfrom_doc,
"recvfrom(buffersize[, flags]) -> (data, address info)\n\
\n\
Like recv(buffersize, flags) but also return the sender's address info.");
/* s.recvfrom_into(buffer[, nbytes [,flags]]) method */
static PyObject *
sock_recvfrom_into(PySocketSockObject *s, PyObject *args, PyObject* kwds)
{
static char *kwlist[] = {"buffer", "nbytes", "flags", 0};
int flags = 0;
Py_buffer pbuf;
char *buf;
Py_ssize_t readlen, buflen, recvlen = 0;
PyObject *addr = NULL;
if (!PyArg_ParseTupleAndKeywords(args, kwds, "w*|ni:recvfrom_into",
kwlist, &pbuf,
&recvlen, &flags))
return NULL;
buf = pbuf.buf;
buflen = pbuf.len;
assert(buf != 0 && buflen > 0);
if (recvlen < 0) {
PyBuffer_Release(&pbuf);
PyErr_SetString(PyExc_ValueError,
"negative buffersize in recvfrom_into");
return NULL;
}
if (recvlen == 0) {
/* If nbytes was not specified, use the buffer's length */
recvlen = buflen;
}
readlen = sock_recvfrom_guts(s, buf, recvlen, flags, &addr);
if (readlen < 0) {
PyBuffer_Release(&pbuf);
/* Return an error */
Py_XDECREF(addr);
return NULL;
}
PyBuffer_Release(&pbuf);
/* Return the number of bytes read and the address. Note that we do
not do anything special here in the case that readlen < recvlen. */
return Py_BuildValue("nN", readlen, addr);
}
PyDoc_STRVAR(recvfrom_into_doc,
"recvfrom_into(buffer[, nbytes[, flags]]) -> (nbytes, address info)\n\
\n\
Like recv_into(buffer[, nbytes[, flags]]) but also return the sender's address info.");
/* The sendmsg() and recvmsg[_into]() methods require a working
CMSG_LEN(). See the comment near get_CMSG_LEN(). */
#ifdef CMSG_LEN
/*
* Call recvmsg() with the supplied iovec structures, flags, and
* ancillary data buffer size (controllen). Returns the tuple return
* value for recvmsg() or recvmsg_into(), with the first item provided
* by the supplied makeval() function. makeval() will be called with
* the length read and makeval_data as arguments, and must return a
* new reference (which will be decrefed if there is a subsequent
* error). On error, closes any file descriptors received via
* SCM_RIGHTS.
*/
static PyObject *
sock_recvmsg_guts(PySocketSockObject *s, struct iovec *iov, int iovlen,
int flags, Py_ssize_t controllen,
PyObject *(*makeval)(ssize_t, void *), void *makeval_data)
{
ssize_t bytes_received = -1;
int timeout;
sock_addr_t addrbuf;
socklen_t addrbuflen;
struct msghdr msg = {0};
PyObject *cmsg_list = NULL, *retval = NULL;
void *controlbuf = NULL;
struct cmsghdr *cmsgh;
size_t cmsgdatalen = 0;
int cmsg_status;
/* XXX: POSIX says that msg_name and msg_namelen "shall be
ignored" when the socket is connected (Linux fills them in
anyway for AF_UNIX sockets at least). Normally msg_namelen
seems to be set to 0 if there's no address, but try to
initialize msg_name to something that won't be mistaken for a
real address if that doesn't happen. */
if (!getsockaddrlen(s, &addrbuflen))
return NULL;
memset(&addrbuf, 0, addrbuflen);
SAS2SA(&addrbuf)->sa_family = AF_UNSPEC;
if (controllen < 0 || controllen > SOCKLEN_T_LIMIT) {
PyErr_SetString(PyExc_ValueError,
"invalid ancillary data buffer length");
return NULL;
}
if (controllen > 0 && (controlbuf = PyMem_Malloc(controllen)) == NULL)
return PyErr_NoMemory();
/* Make the system call. */
if (!IS_SELECTABLE(s)) {
select_error();
goto finally;
}
BEGIN_SELECT_LOOP(s)
Py_BEGIN_ALLOW_THREADS;
msg.msg_name = SAS2SA(&addrbuf);
msg.msg_namelen = addrbuflen;
msg.msg_iov = iov;
msg.msg_iovlen = iovlen;
msg.msg_control = controlbuf;
msg.msg_controllen = controllen;
timeout = internal_select_ex(s, 0, interval);
if (!timeout)
bytes_received = recvmsg(s->sock_fd, &msg, flags);
Py_END_ALLOW_THREADS;
if (timeout == 1) {
PyErr_SetString(socket_timeout, "timed out");
goto finally;
}
END_SELECT_LOOP(s)
if (bytes_received < 0) {
s->errorhandler();
goto finally;
}
/* Make list of (level, type, data) tuples from control messages. */
if ((cmsg_list = PyList_New(0)) == NULL)
goto err_closefds;
/* Check for empty ancillary data as old CMSG_FIRSTHDR()
implementations didn't do so. */
for (cmsgh = ((msg.msg_controllen > 0) ? CMSG_FIRSTHDR(&msg) : NULL);
cmsgh != NULL; cmsgh = CMSG_NXTHDR(&msg, cmsgh)) {
PyObject *bytes, *tuple;
int tmp;
cmsg_status = get_cmsg_data_len(&msg, cmsgh, &cmsgdatalen);
if (cmsg_status != 0) {
if (PyErr_WarnEx(PyExc_RuntimeWarning,
"received malformed or improperly-truncated "
"ancillary data", 1) == -1)
goto err_closefds;
}
if (cmsg_status < 0)
break;
if (cmsgdatalen > PY_SSIZE_T_MAX) {
PyErr_SetString(PyExc_OSError, "control message too long");
goto err_closefds;
}
bytes = PyBytes_FromStringAndSize((char *)CMSG_DATA(cmsgh),
cmsgdatalen);
tuple = Py_BuildValue("iiN", (int)cmsgh->cmsg_level,
(int)cmsgh->cmsg_type, bytes);
if (tuple == NULL)
goto err_closefds;
tmp = PyList_Append(cmsg_list, tuple);
Py_DECREF(tuple);
if (tmp != 0)
goto err_closefds;
if (cmsg_status != 0)
break;
}
retval = Py_BuildValue("NOiN",
(*makeval)(bytes_received, makeval_data),
cmsg_list,
(int)msg.msg_flags,
makesockaddr(s->sock_fd, SAS2SA(&addrbuf),
((msg.msg_namelen > addrbuflen) ?
addrbuflen : msg.msg_namelen),
s->sock_proto));
if (retval == NULL)
goto err_closefds;
finally:
Py_XDECREF(cmsg_list);
PyMem_Free(controlbuf);
return retval;
err_closefds:
#ifdef SCM_RIGHTS
/* Close all descriptors coming from SCM_RIGHTS, so they don't leak. */
for (cmsgh = ((msg.msg_controllen > 0) ? CMSG_FIRSTHDR(&msg) : NULL);
cmsgh != NULL; cmsgh = CMSG_NXTHDR(&msg, cmsgh)) {
cmsg_status = get_cmsg_data_len(&msg, cmsgh, &cmsgdatalen);
if (cmsg_status < 0)
break;
if (cmsgh->cmsg_level == SOL_SOCKET &&
cmsgh->cmsg_type == SCM_RIGHTS) {
size_t numfds;
int *fdp;
numfds = cmsgdatalen / sizeof(int);
fdp = (int *)CMSG_DATA(cmsgh);
while (numfds-- > 0)
close(*fdp++);
}
if (cmsg_status != 0)
break;
}
#endif /* SCM_RIGHTS */
goto finally;
}
static PyObject *
makeval_recvmsg(ssize_t received, void *data)
{
PyObject **buf = data;
if (received < PyBytes_GET_SIZE(*buf))
_PyBytes_Resize(buf, received);
Py_XINCREF(*buf);
return *buf;
}
/* s.recvmsg(bufsize[, ancbufsize[, flags]]) method */
static PyObject *
sock_recvmsg(PySocketSockObject *s, PyObject *args)
{
Py_ssize_t bufsize, ancbufsize = 0;
int flags = 0;
struct iovec iov;
PyObject *buf = NULL, *retval = NULL;
if (!PyArg_ParseTuple(args, "n|ni:recvmsg", &bufsize, &ancbufsize, &flags))
return NULL;
if (bufsize < 0) {
PyErr_SetString(PyExc_ValueError, "negative buffer size in recvmsg()");
return NULL;
}
if ((buf = PyBytes_FromStringAndSize(NULL, bufsize)) == NULL)
return NULL;
iov.iov_base = PyBytes_AS_STRING(buf);
iov.iov_len = bufsize;
/* Note that we're passing a pointer to *our pointer* to the bytes
object here (&buf); makeval_recvmsg() may incref the object, or
deallocate it and set our pointer to NULL. */
retval = sock_recvmsg_guts(s, &iov, 1, flags, ancbufsize,
&makeval_recvmsg, &buf);
Py_XDECREF(buf);
return retval;
}
PyDoc_STRVAR(recvmsg_doc,
"recvmsg(bufsize[, ancbufsize[, flags]]) -> (data, ancdata, msg_flags, address)\n\
\n\
Receive normal data (up to bufsize bytes) and ancillary data from the\n\
socket. The ancbufsize argument sets the size in bytes of the\n\
internal buffer used to receive the ancillary data; it defaults to 0,\n\
meaning that no ancillary data will be received. Appropriate buffer\n\
sizes for ancillary data can be calculated using CMSG_SPACE() or\n\
CMSG_LEN(), and items which do not fit into the buffer might be\n\
truncated or discarded. The flags argument defaults to 0 and has the\n\
same meaning as for recv().\n\
\n\
The return value is a 4-tuple: (data, ancdata, msg_flags, address).\n\
The data item is a bytes object holding the non-ancillary data\n\
received. The ancdata item is a list of zero or more tuples\n\
(cmsg_level, cmsg_type, cmsg_data) representing the ancillary data\n\
(control messages) received: cmsg_level and cmsg_type are integers\n\
specifying the protocol level and protocol-specific type respectively,\n\
and cmsg_data is a bytes object holding the associated data. The\n\
msg_flags item is the bitwise OR of various flags indicating\n\
conditions on the received message; see your system documentation for\n\
details. If the receiving socket is unconnected, address is the\n\
address of the sending socket, if available; otherwise, its value is\n\
unspecified.\n\
\n\
If recvmsg() raises an exception after the system call returns, it\n\
will first attempt to close any file descriptors received via the\n\
SCM_RIGHTS mechanism.");
static PyObject *
makeval_recvmsg_into(ssize_t received, void *data)
{
return PyLong_FromSsize_t(received);
}
/* s.recvmsg_into(buffers[, ancbufsize[, flags]]) method */
static PyObject *
sock_recvmsg_into(PySocketSockObject *s, PyObject *args)
{
Py_ssize_t ancbufsize = 0;
int flags = 0;
struct iovec *iovs = NULL;
Py_ssize_t i, nitems, nbufs = 0;
Py_buffer *bufs = NULL;
PyObject *buffers_arg, *fast, *retval = NULL;
if (!PyArg_ParseTuple(args, "O|ni:recvmsg_into",
&buffers_arg, &ancbufsize, &flags))
return NULL;
if ((fast = PySequence_Fast(buffers_arg,
"recvmsg_into() argument 1 must be an "
"iterable")) == NULL)
return NULL;
nitems = PySequence_Fast_GET_SIZE(fast);
if (nitems > INT_MAX) {
PyErr_SetString(PyExc_OSError, "recvmsg_into() argument 1 is too long");
goto finally;
}
/* Fill in an iovec for each item, and save the Py_buffer
structs to release afterwards. */
if (nitems > 0 && ((iovs = PyMem_New(struct iovec, nitems)) == NULL ||
(bufs = PyMem_New(Py_buffer, nitems)) == NULL)) {
PyErr_NoMemory();
goto finally;
}
for (; nbufs < nitems; nbufs++) {
if (!PyArg_Parse(PySequence_Fast_GET_ITEM(fast, nbufs),
"w*;recvmsg_into() argument 1 must be an iterable "
"of single-segment read-write buffers",
&bufs[nbufs]))
goto finally;
iovs[nbufs].iov_base = bufs[nbufs].buf;
iovs[nbufs].iov_len = bufs[nbufs].len;
}
retval = sock_recvmsg_guts(s, iovs, nitems, flags, ancbufsize,
&makeval_recvmsg_into, NULL);
finally:
for (i = 0; i < nbufs; i++)
PyBuffer_Release(&bufs[i]);
PyMem_Free(bufs);
PyMem_Free(iovs);
Py_DECREF(fast);
return retval;
}
PyDoc_STRVAR(recvmsg_into_doc,
"recvmsg_into(buffers[, ancbufsize[, flags]]) -> (nbytes, ancdata, msg_flags, address)\n\
\n\
Receive normal data and ancillary data from the socket, scattering the\n\
non-ancillary data into a series of buffers. The buffers argument\n\
must be an iterable of objects that export writable buffers\n\
(e.g. bytearray objects); these will be filled with successive chunks\n\
of the non-ancillary data until it has all been written or there are\n\
no more buffers. The ancbufsize argument sets the size in bytes of\n\
the internal buffer used to receive the ancillary data; it defaults to\n\
0, meaning that no ancillary data will be received. Appropriate\n\
buffer sizes for ancillary data can be calculated using CMSG_SPACE()\n\
or CMSG_LEN(), and items which do not fit into the buffer might be\n\
truncated or discarded. The flags argument defaults to 0 and has the\n\
same meaning as for recv().\n\
\n\
The return value is a 4-tuple: (nbytes, ancdata, msg_flags, address).\n\
The nbytes item is the total number of bytes of non-ancillary data\n\
written into the buffers. The ancdata item is a list of zero or more\n\
tuples (cmsg_level, cmsg_type, cmsg_data) representing the ancillary\n\
data (control messages) received: cmsg_level and cmsg_type are\n\
integers specifying the protocol level and protocol-specific type\n\
respectively, and cmsg_data is a bytes object holding the associated\n\
data. The msg_flags item is the bitwise OR of various flags\n\
indicating conditions on the received message; see your system\n\
documentation for details. If the receiving socket is unconnected,\n\
address is the address of the sending socket, if available; otherwise,\n\
its value is unspecified.\n\
\n\
If recvmsg_into() raises an exception after the system call returns,\n\
it will first attempt to close any file descriptors received via the\n\
SCM_RIGHTS mechanism.");
#endif /* CMSG_LEN */
/* s.send(data [,flags]) method */
static PyObject *
sock_send(PySocketSockObject *s, PyObject *args)
{
char *buf;
Py_ssize_t len, n = -1;
int flags = 0, timeout;
Py_buffer pbuf;
if (!PyArg_ParseTuple(args, "y*|i:send", &pbuf, &flags))
return NULL;
if (!IS_SELECTABLE(s)) {
PyBuffer_Release(&pbuf);
return select_error();
}
buf = pbuf.buf;
len = pbuf.len;
BEGIN_SELECT_LOOP(s)
Py_BEGIN_ALLOW_THREADS
timeout = internal_select_ex(s, 1, interval);
if (!timeout)
#ifdef __VMS
n = sendsegmented(s->sock_fd, buf, len, flags);
#else
n = send(s->sock_fd, buf, len, flags);
#endif
Py_END_ALLOW_THREADS
if (timeout == 1) {
PyBuffer_Release(&pbuf);
PyErr_SetString(socket_timeout, "timed out");
return NULL;
}
END_SELECT_LOOP(s)
PyBuffer_Release(&pbuf);
if (n < 0)
return s->errorhandler();
return PyLong_FromSsize_t(n);
}
PyDoc_STRVAR(send_doc,
"send(data[, flags]) -> count\n\
\n\
Send a data string to the socket. For the optional flags\n\
argument, see the Unix manual. Return the number of bytes\n\
sent; this may be less than len(data) if the network is busy.");
/* s.sendall(data [,flags]) method */
static PyObject *
sock_sendall(PySocketSockObject *s, PyObject *args)
{
char *buf;
Py_ssize_t len, n = -1;
int flags = 0, timeout, saved_errno;
Py_buffer pbuf;
if (!PyArg_ParseTuple(args, "y*|i:sendall", &pbuf, &flags))
return NULL;
buf = pbuf.buf;
len = pbuf.len;
if (!IS_SELECTABLE(s)) {
PyBuffer_Release(&pbuf);
return select_error();
}
do {
Py_BEGIN_ALLOW_THREADS
timeout = internal_select(s, 1);
n = -1;
if (!timeout) {
#ifdef __VMS
n = sendsegmented(s->sock_fd, buf, len, flags);
#else
n = send(s->sock_fd, buf, len, flags);
#endif
}
Py_END_ALLOW_THREADS
if (timeout == 1) {
PyBuffer_Release(&pbuf);
PyErr_SetString(socket_timeout, "timed out");
return NULL;
}
/* PyErr_CheckSignals() might change errno */
saved_errno = errno;
/* We must run our signal handlers before looping again.
send() can return a successful partial write when it is
interrupted, so we can't restrict ourselves to EINTR. */
if (PyErr_CheckSignals()) {
PyBuffer_Release(&pbuf);
return NULL;
}
if (n < 0) {
/* If interrupted, try again */
if (saved_errno == EINTR)
continue;
else
break;
}
buf += n;
len -= n;
} while (len > 0);
PyBuffer_Release(&pbuf);
if (n < 0)
return s->errorhandler();
Py_INCREF(Py_None);
return Py_None;
}
PyDoc_STRVAR(sendall_doc,
"sendall(data[, flags])\n\
\n\
Send a data string to the socket. For the optional flags\n\
argument, see the Unix manual. This calls send() repeatedly\n\
until all data is sent. If an error occurs, it's impossible\n\
to tell how much data has been sent.");
/* s.sendto(data, [flags,] sockaddr) method */
static PyObject *
sock_sendto(PySocketSockObject *s, PyObject *args)
{
Py_buffer pbuf;
PyObject *addro;
char *buf;
Py_ssize_t len, arglen;
sock_addr_t addrbuf;
int addrlen, n = -1, flags, timeout;
flags = 0;
arglen = PyTuple_Size(args);
switch (arglen) {
case 2:
PyArg_ParseTuple(args, "y*O:sendto", &pbuf, &addro);
break;
case 3:
PyArg_ParseTuple(args, "y*iO:sendto",
&pbuf, &flags, &addro);
break;
default:
PyErr_Format(PyExc_TypeError,
"sendto() takes 2 or 3 arguments (%d given)",
arglen);
return NULL;
}
if (PyErr_Occurred())
return NULL;
buf = pbuf.buf;
len = pbuf.len;
if (!IS_SELECTABLE(s)) {
PyBuffer_Release(&pbuf);
return select_error();
}
if (!getsockaddrarg(s, addro, SAS2SA(&addrbuf), &addrlen)) {
PyBuffer_Release(&pbuf);
return NULL;
}
BEGIN_SELECT_LOOP(s)
Py_BEGIN_ALLOW_THREADS
timeout = internal_select_ex(s, 1, interval);
if (!timeout)
n = sendto(s->sock_fd, buf, len, flags, SAS2SA(&addrbuf), addrlen);
Py_END_ALLOW_THREADS
if (timeout == 1) {
PyBuffer_Release(&pbuf);
PyErr_SetString(socket_timeout, "timed out");
return NULL;
}
END_SELECT_LOOP(s)
PyBuffer_Release(&pbuf);
if (n < 0)
return s->errorhandler();
return PyLong_FromSsize_t(n);
}
PyDoc_STRVAR(sendto_doc,
"sendto(data[, flags], address) -> count\n\
\n\
Like send(data, flags) but allows specifying the destination address.\n\
For IP sockets, the address is a pair (hostaddr, port).");
/* The sendmsg() and recvmsg[_into]() methods require a working
CMSG_LEN(). See the comment near get_CMSG_LEN(). */
#ifdef CMSG_LEN
/* s.sendmsg(buffers[, ancdata[, flags[, address]]]) method */
static PyObject *
sock_sendmsg(PySocketSockObject *s, PyObject *args)
{
Py_ssize_t i, ndataparts, ndatabufs = 0, ncmsgs, ncmsgbufs = 0;
Py_buffer *databufs = NULL;
struct iovec *iovs = NULL;
sock_addr_t addrbuf;
struct msghdr msg = {0};
struct cmsginfo {
int level;
int type;
Py_buffer data;
} *cmsgs = NULL;
void *controlbuf = NULL;
size_t controllen, controllen_last;
ssize_t bytes_sent = -1;
int addrlen, timeout, flags = 0;
PyObject *data_arg, *cmsg_arg = NULL, *addr_arg = NULL, *data_fast = NULL,
*cmsg_fast = NULL, *retval = NULL;
if (!PyArg_ParseTuple(args, "O|OiO:sendmsg",
&data_arg, &cmsg_arg, &flags, &addr_arg))
return NULL;
/* Parse destination address. */
if (addr_arg != NULL && addr_arg != Py_None) {
if (!getsockaddrarg(s, addr_arg, SAS2SA(&addrbuf), &addrlen))
goto finally;
msg.msg_name = &addrbuf;
msg.msg_namelen = addrlen;
}
/* Fill in an iovec for each message part, and save the Py_buffer
structs to release afterwards. */
if ((data_fast = PySequence_Fast(data_arg,
"sendmsg() argument 1 must be an "
"iterable")) == NULL)
goto finally;
ndataparts = PySequence_Fast_GET_SIZE(data_fast);
if (ndataparts > INT_MAX) {
PyErr_SetString(PyExc_OSError, "sendmsg() argument 1 is too long");
goto finally;
}
msg.msg_iovlen = ndataparts;
if (ndataparts > 0 &&
((msg.msg_iov = iovs = PyMem_New(struct iovec, ndataparts)) == NULL ||
(databufs = PyMem_New(Py_buffer, ndataparts)) == NULL)) {
PyErr_NoMemory();
goto finally;
}
for (; ndatabufs < ndataparts; ndatabufs++) {
if (!PyArg_Parse(PySequence_Fast_GET_ITEM(data_fast, ndatabufs),
"y*;sendmsg() argument 1 must be an iterable of "
"buffer-compatible objects",
&databufs[ndatabufs]))
goto finally;
iovs[ndatabufs].iov_base = databufs[ndatabufs].buf;
iovs[ndatabufs].iov_len = databufs[ndatabufs].len;
}
if (cmsg_arg == NULL)
ncmsgs = 0;
else {
if ((cmsg_fast = PySequence_Fast(cmsg_arg,
"sendmsg() argument 2 must be an "
"iterable")) == NULL)
goto finally;
ncmsgs = PySequence_Fast_GET_SIZE(cmsg_fast);
}
#ifndef CMSG_SPACE
if (ncmsgs > 1) {
PyErr_SetString(PyExc_OSError,
"sending multiple control messages is not supported "
"on this system");
goto finally;
}
#endif
/* Save level, type and Py_buffer for each control message,
and calculate total size. */
if (ncmsgs > 0 && (cmsgs = PyMem_New(struct cmsginfo, ncmsgs)) == NULL) {
PyErr_NoMemory();
goto finally;
}
controllen = controllen_last = 0;
while (ncmsgbufs < ncmsgs) {
size_t bufsize, space;
if (!PyArg_Parse(PySequence_Fast_GET_ITEM(cmsg_fast, ncmsgbufs),
"(iiy*):[sendmsg() ancillary data items]",
&cmsgs[ncmsgbufs].level,
&cmsgs[ncmsgbufs].type,
&cmsgs[ncmsgbufs].data))
goto finally;
bufsize = cmsgs[ncmsgbufs++].data.len;
#ifdef CMSG_SPACE
if (!get_CMSG_SPACE(bufsize, &space)) {
#else
if (!get_CMSG_LEN(bufsize, &space)) {
#endif
PyErr_SetString(PyExc_OSError, "ancillary data item too large");
goto finally;
}
controllen += space;
if (controllen > SOCKLEN_T_LIMIT || controllen < controllen_last) {
PyErr_SetString(PyExc_OSError, "too much ancillary data");
goto finally;
}
controllen_last = controllen;
}
/* Construct ancillary data block from control message info. */
if (ncmsgbufs > 0) {
struct cmsghdr *cmsgh = NULL;
if ((msg.msg_control = controlbuf =
PyMem_Malloc(controllen)) == NULL) {
PyErr_NoMemory();
goto finally;
}
msg.msg_controllen = controllen;
/* Need to zero out the buffer as a workaround for glibc's
CMSG_NXTHDR() implementation. After getting the pointer to
the next header, it checks its (uninitialized) cmsg_len
member to see if the "message" fits in the buffer, and
returns NULL if it doesn't. Zero-filling the buffer
ensures that this doesn't happen. */
memset(controlbuf, 0, controllen);
for (i = 0; i < ncmsgbufs; i++) {
size_t msg_len, data_len = cmsgs[i].data.len;
int enough_space = 0;
cmsgh = (i == 0) ? CMSG_FIRSTHDR(&msg) : CMSG_NXTHDR(&msg, cmsgh);
if (cmsgh == NULL) {
PyErr_Format(PyExc_RuntimeError,
"unexpected NULL result from %s()",
(i == 0) ? "CMSG_FIRSTHDR" : "CMSG_NXTHDR");
goto finally;
}
if (!get_CMSG_LEN(data_len, &msg_len)) {
PyErr_SetString(PyExc_RuntimeError,
"item size out of range for CMSG_LEN()");
goto finally;
}
if (cmsg_min_space(&msg, cmsgh, msg_len)) {
size_t space;
cmsgh->cmsg_len = msg_len;
if (get_cmsg_data_space(&msg, cmsgh, &space))
enough_space = (space >= data_len);
}
if (!enough_space) {
PyErr_SetString(PyExc_RuntimeError,
"ancillary data does not fit in calculated "
"space");
goto finally;
}
cmsgh->cmsg_level = cmsgs[i].level;
cmsgh->cmsg_type = cmsgs[i].type;
memcpy(CMSG_DATA(cmsgh), cmsgs[i].data.buf, data_len);
}
}
/* Make the system call. */
if (!IS_SELECTABLE(s)) {
select_error();
goto finally;
}
BEGIN_SELECT_LOOP(s)
Py_BEGIN_ALLOW_THREADS;
timeout = internal_select_ex(s, 1, interval);
if (!timeout)
bytes_sent = sendmsg(s->sock_fd, &msg, flags);
Py_END_ALLOW_THREADS;
if (timeout == 1) {
PyErr_SetString(socket_timeout, "timed out");
goto finally;
}
END_SELECT_LOOP(s)
if (bytes_sent < 0) {
s->errorhandler();
goto finally;
}
retval = PyLong_FromSsize_t(bytes_sent);
finally:
PyMem_Free(controlbuf);
for (i = 0; i < ncmsgbufs; i++)
PyBuffer_Release(&cmsgs[i].data);
PyMem_Free(cmsgs);
Py_XDECREF(cmsg_fast);
for (i = 0; i < ndatabufs; i++)
PyBuffer_Release(&databufs[i]);
PyMem_Free(databufs);
PyMem_Free(iovs);
Py_XDECREF(data_fast);
return retval;
}
PyDoc_STRVAR(sendmsg_doc,
"sendmsg(buffers[, ancdata[, flags[, address]]]) -> count\n\
\n\
Send normal and ancillary data to the socket, gathering the\n\
non-ancillary data from a series of buffers and concatenating it into\n\
a single message. The buffers argument specifies the non-ancillary\n\
data as an iterable of buffer-compatible objects (e.g. bytes objects).\n\
The ancdata argument specifies the ancillary data (control messages)\n\
as an iterable of zero or more tuples (cmsg_level, cmsg_type,\n\
cmsg_data), where cmsg_level and cmsg_type are integers specifying the\n\
protocol level and protocol-specific type respectively, and cmsg_data\n\
is a buffer-compatible object holding the associated data. The flags\n\
argument defaults to 0 and has the same meaning as for send(). If\n\
address is supplied and not None, it sets a destination address for\n\
the message. The return value is the number of bytes of non-ancillary\n\
data sent.");
#endif /* CMSG_LEN */
/* s.shutdown(how) method */
static PyObject *
sock_shutdown(PySocketSockObject *s, PyObject *arg)
{
int how;
int res;
how = _PyLong_AsInt(arg);
if (how == -1 && PyErr_Occurred())
return NULL;
Py_BEGIN_ALLOW_THREADS
res = shutdown(s->sock_fd, how);
Py_END_ALLOW_THREADS
if (res < 0)
return s->errorhandler();
Py_INCREF(Py_None);
return Py_None;
}
PyDoc_STRVAR(shutdown_doc,
"shutdown(flag)\n\
\n\
Shut down the reading side of the socket (flag == SHUT_RD), the writing side\n\
of the socket (flag == SHUT_WR), or both ends (flag == SHUT_RDWR).");
#if defined(MS_WINDOWS) && defined(SIO_RCVALL)
static PyObject*
sock_ioctl(PySocketSockObject *s, PyObject *arg)
{
unsigned long cmd = SIO_RCVALL;
PyObject *argO;
DWORD recv;
if (!PyArg_ParseTuple(arg, "kO:ioctl", &cmd, &argO))
return NULL;
switch (cmd) {
case SIO_RCVALL: {
unsigned int option = RCVALL_ON;
if (!PyArg_ParseTuple(arg, "kI:ioctl", &cmd, &option))
return NULL;
if (WSAIoctl(s->sock_fd, cmd, &option, sizeof(option),
NULL, 0, &recv, NULL, NULL) == SOCKET_ERROR) {
return set_error();
}
return PyLong_FromUnsignedLong(recv); }
case SIO_KEEPALIVE_VALS: {
struct tcp_keepalive ka;
if (!PyArg_ParseTuple(arg, "k(kkk):ioctl", &cmd,
&ka.onoff, &ka.keepalivetime, &ka.keepaliveinterval))
return NULL;
if (WSAIoctl(s->sock_fd, cmd, &ka, sizeof(ka),
NULL, 0, &recv, NULL, NULL) == SOCKET_ERROR) {
return set_error();
}
return PyLong_FromUnsignedLong(recv); }
default:
PyErr_Format(PyExc_ValueError, "invalid ioctl command %d", cmd);
return NULL;
}
}
PyDoc_STRVAR(sock_ioctl_doc,
"ioctl(cmd, option) -> long\n\
\n\
Control the socket with WSAIoctl syscall. Currently supported 'cmd' values are\n\
SIO_RCVALL: 'option' must be one of the socket.RCVALL_* constants.\n\
SIO_KEEPALIVE_VALS: 'option' is a tuple of (onoff, timeout, interval).");
#endif
#if defined(MS_WINDOWS)
static PyObject*
sock_share(PySocketSockObject *s, PyObject *arg)
{
WSAPROTOCOL_INFO info;
DWORD processId;
int result;
if (!PyArg_ParseTuple(arg, "I", &processId))
return NULL;
Py_BEGIN_ALLOW_THREADS
result = WSADuplicateSocket(s->sock_fd, processId, &info);
Py_END_ALLOW_THREADS
if (result == SOCKET_ERROR)
return set_error();
return PyBytes_FromStringAndSize((const char*)&info, sizeof(info));
}
PyDoc_STRVAR(sock_share_doc,
"share(process_id) -> bytes\n\
\n\
Share the socket with another process. The target process id\n\
must be provided and the resulting bytes object passed to the target\n\
process. There the shared socket can be instantiated by calling\n\
socket.fromshare().");
#endif
/* List of methods for socket objects */
static PyMethodDef sock_methods[] = {
{"_accept", (PyCFunction)sock_accept, METH_NOARGS,
accept_doc},
{"bind", (PyCFunction)sock_bind, METH_O,
bind_doc},
{"close", (PyCFunction)sock_close, METH_NOARGS,
close_doc},
{"connect", (PyCFunction)sock_connect, METH_O,
connect_doc},
{"connect_ex", (PyCFunction)sock_connect_ex, METH_O,
connect_ex_doc},
{"detach", (PyCFunction)sock_detach, METH_NOARGS,
detach_doc},
{"fileno", (PyCFunction)sock_fileno, METH_NOARGS,
fileno_doc},
#ifdef HAVE_GETPEERNAME
{"getpeername", (PyCFunction)sock_getpeername,
METH_NOARGS, getpeername_doc},
#endif
{"getsockname", (PyCFunction)sock_getsockname,
METH_NOARGS, getsockname_doc},
{"getsockopt", (PyCFunction)sock_getsockopt, METH_VARARGS,
getsockopt_doc},
#if defined(MS_WINDOWS) && defined(SIO_RCVALL)
{"ioctl", (PyCFunction)sock_ioctl, METH_VARARGS,
sock_ioctl_doc},
#endif
#if defined(MS_WINDOWS)
{"share", (PyCFunction)sock_share, METH_VARARGS,
sock_share_doc},
#endif
{"listen", (PyCFunction)sock_listen, METH_O,
listen_doc},
{"recv", (PyCFunction)sock_recv, METH_VARARGS,
recv_doc},
{"recv_into", (PyCFunction)sock_recv_into, METH_VARARGS | METH_KEYWORDS,
recv_into_doc},
{"recvfrom", (PyCFunction)sock_recvfrom, METH_VARARGS,
recvfrom_doc},
{"recvfrom_into", (PyCFunction)sock_recvfrom_into, METH_VARARGS | METH_KEYWORDS,
recvfrom_into_doc},
{"send", (PyCFunction)sock_send, METH_VARARGS,
send_doc},
{"sendall", (PyCFunction)sock_sendall, METH_VARARGS,
sendall_doc},
{"sendto", (PyCFunction)sock_sendto, METH_VARARGS,
sendto_doc},
{"setblocking", (PyCFunction)sock_setblocking, METH_O,
setblocking_doc},
{"settimeout", (PyCFunction)sock_settimeout, METH_O,
settimeout_doc},
{"gettimeout", (PyCFunction)sock_gettimeout, METH_NOARGS,
gettimeout_doc},
{"setsockopt", (PyCFunction)sock_setsockopt, METH_VARARGS,
setsockopt_doc},
{"shutdown", (PyCFunction)sock_shutdown, METH_O,
shutdown_doc},
#ifdef CMSG_LEN
{"recvmsg", (PyCFunction)sock_recvmsg, METH_VARARGS,
recvmsg_doc},
{"recvmsg_into", (PyCFunction)sock_recvmsg_into, METH_VARARGS,
recvmsg_into_doc,},
{"sendmsg", (PyCFunction)sock_sendmsg, METH_VARARGS,
sendmsg_doc},
#endif
{NULL, NULL} /* sentinel */
};
/* SockObject members */
static PyMemberDef sock_memberlist[] = {
{"family", T_INT, offsetof(PySocketSockObject, sock_family), READONLY, "the socket family"},
{"type", T_INT, offsetof(PySocketSockObject, sock_type), READONLY, "the socket type"},
{"proto", T_INT, offsetof(PySocketSockObject, sock_proto), READONLY, "the socket protocol"},
{"timeout", T_DOUBLE, offsetof(PySocketSockObject, sock_timeout), READONLY, "the socket timeout"},
{0},
};
/* Deallocate a socket object in response to the last Py_DECREF().
First close the file description. */
static void
sock_dealloc(PySocketSockObject *s)
{
if (s->sock_fd != -1) {
PyObject *exc, *val, *tb;
Py_ssize_t old_refcount = Py_REFCNT(s);
++Py_REFCNT(s);
PyErr_Fetch(&exc, &val, &tb);
if (PyErr_WarnFormat(PyExc_ResourceWarning, 1,
"unclosed %R", s))
/* Spurious errors can appear at shutdown */
if (PyErr_ExceptionMatches(PyExc_Warning))
PyErr_WriteUnraisable((PyObject *) s);
PyErr_Restore(exc, val, tb);
(void) SOCKETCLOSE(s->sock_fd);
Py_REFCNT(s) = old_refcount;
}
Py_TYPE(s)->tp_free((PyObject *)s);
}
static PyObject *
sock_repr(PySocketSockObject *s)
{
#if SIZEOF_SOCKET_T > SIZEOF_LONG
if (s->sock_fd > LONG_MAX) {
/* this can occur on Win64, and actually there is a special
ugly printf formatter for decimal pointer length integer
printing, only bother if necessary*/
PyErr_SetString(PyExc_OverflowError,
"no printf formatter to display "
"the socket descriptor in decimal");
return NULL;
}
#endif
return PyUnicode_FromFormat(
"<socket object, fd=%ld, family=%d, type=%d, proto=%d>",
(long)s->sock_fd, s->sock_family,
s->sock_type,
s->sock_proto);
}
/* Create a new, uninitialized socket object. */
static PyObject *
sock_new(PyTypeObject *type, PyObject *args, PyObject *kwds)
{
PyObject *new;
new = type->tp_alloc(type, 0);
if (new != NULL) {
((PySocketSockObject *)new)->sock_fd = -1;
((PySocketSockObject *)new)->sock_timeout = -1.0;
((PySocketSockObject *)new)->errorhandler = &set_error;
}
return new;
}
/* Initialize a new socket object. */
/*ARGSUSED*/
static int
sock_initobj(PyObject *self, PyObject *args, PyObject *kwds)
{
PySocketSockObject *s = (PySocketSockObject *)self;
PyObject *fdobj = NULL;
SOCKET_T fd = INVALID_SOCKET;
int family = AF_INET, type = SOCK_STREAM, proto = 0;
static char *keywords[] = {"family", "type", "proto", "fileno", 0};
if (!PyArg_ParseTupleAndKeywords(args, kwds,
"|iiiO:socket", keywords,
&family, &type, &proto, &fdobj))
return -1;
if (fdobj != NULL && fdobj != Py_None) {
#ifdef MS_WINDOWS
/* recreate a socket that was duplicated */
if (PyBytes_Check(fdobj)) {
WSAPROTOCOL_INFO info;
if (PyBytes_GET_SIZE(fdobj) != sizeof(info)) {
PyErr_Format(PyExc_ValueError,
"socket descriptor string has wrong size, "
"should be %zu bytes.", sizeof(info));
return -1;
}
memcpy(&info, PyBytes_AS_STRING(fdobj), sizeof(info));
Py_BEGIN_ALLOW_THREADS
fd = WSASocket(FROM_PROTOCOL_INFO, FROM_PROTOCOL_INFO,
FROM_PROTOCOL_INFO, &info, 0, WSA_FLAG_OVERLAPPED);
Py_END_ALLOW_THREADS
if (fd == INVALID_SOCKET) {
set_error();
return -1;
}
family = info.iAddressFamily;
type = info.iSocketType;
proto = info.iProtocol;
}
else
#endif
{
fd = PyLong_AsSocket_t(fdobj);
if (fd == (SOCKET_T)(-1) && PyErr_Occurred())
return -1;
if (fd == INVALID_SOCKET) {
PyErr_SetString(PyExc_ValueError,
"can't use invalid socket value");
return -1;
}
}
}
else {
Py_BEGIN_ALLOW_THREADS
fd = socket(family, type, proto);
Py_END_ALLOW_THREADS
if (fd == INVALID_SOCKET) {
set_error();
return -1;
}
}
init_sockobject(s, fd, family, type, proto);
return 0;
}
/* Type object for socket objects. */
static PyTypeObject sock_type = {
PyVarObject_HEAD_INIT(0, 0) /* Must fill in type value later */
"_socket.socket", /* tp_name */
sizeof(PySocketSockObject), /* tp_basicsize */
0, /* tp_itemsize */
(destructor)sock_dealloc, /* tp_dealloc */
0, /* tp_print */
0, /* tp_getattr */
0, /* tp_setattr */
0, /* tp_reserved */
(reprfunc)sock_repr, /* tp_repr */
0, /* tp_as_number */
0, /* tp_as_sequence */
0, /* tp_as_mapping */
0, /* tp_hash */
0, /* tp_call */
0, /* tp_str */
PyObject_GenericGetAttr, /* tp_getattro */
0, /* tp_setattro */
0, /* tp_as_buffer */
Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE, /* tp_flags */
sock_doc, /* tp_doc */
0, /* tp_traverse */
0, /* tp_clear */
0, /* tp_richcompare */
0, /* tp_weaklistoffset */
0, /* tp_iter */
0, /* tp_iternext */
sock_methods, /* tp_methods */
sock_memberlist, /* tp_members */
0, /* tp_getset */
0, /* tp_base */
0, /* tp_dict */
0, /* tp_descr_get */
0, /* tp_descr_set */
0, /* tp_dictoffset */
sock_initobj, /* tp_init */
PyType_GenericAlloc, /* tp_alloc */
sock_new, /* tp_new */
PyObject_Del, /* tp_free */
};
/* Python interface to gethostname(). */
/*ARGSUSED*/
static PyObject *
socket_gethostname(PyObject *self, PyObject *unused)
{
#ifdef MS_WINDOWS
/* Don't use winsock's gethostname, as this returns the ANSI
version of the hostname, whereas we need a Unicode string.
Otherwise, gethostname apparently also returns the DNS name. */
wchar_t buf[MAX_COMPUTERNAME_LENGTH + 1];
DWORD size = Py_ARRAY_LENGTH(buf);
wchar_t *name;
PyObject *result;
if (GetComputerNameExW(ComputerNamePhysicalDnsHostname, buf, &size))
return PyUnicode_FromWideChar(buf, size);
if (GetLastError() != ERROR_MORE_DATA)
return PyErr_SetFromWindowsErr(0);
if (size == 0)
return PyUnicode_New(0, 0);
/* MSDN says ERROR_MORE_DATA may occur because DNS allows longer
names */
name = PyMem_Malloc(size * sizeof(wchar_t));
if (!name)
return NULL;
if (!GetComputerNameExW(ComputerNamePhysicalDnsHostname,
name,
&size))
{
PyMem_Free(name);
return PyErr_SetFromWindowsErr(0);
}
result = PyUnicode_FromWideChar(name, size);
PyMem_Free(name);
return result;
#else
char buf[1024];
int res;
Py_BEGIN_ALLOW_THREADS
res = gethostname(buf, (int) sizeof buf - 1);
Py_END_ALLOW_THREADS
if (res < 0)
return set_error();
buf[sizeof buf - 1] = '\0';
return PyUnicode_FromString(buf);
#endif
}
PyDoc_STRVAR(gethostname_doc,
"gethostname() -> string\n\
\n\
Return the current host name.");
#ifdef HAVE_SETHOSTNAME
PyDoc_STRVAR(sethostname_doc,
"sethostname(name)\n\n\
Sets the hostname to name.");
static PyObject *
socket_sethostname(PyObject *self, PyObject *args)
{
PyObject *hnobj;
Py_buffer buf;
int res, flag = 0;
if (!PyArg_ParseTuple(args, "S:sethostname", &hnobj)) {
PyErr_Clear();
if (!PyArg_ParseTuple(args, "O&:sethostname",
PyUnicode_FSConverter, &hnobj))
return NULL;
flag = 1;
}
res = PyObject_GetBuffer(hnobj, &buf, PyBUF_SIMPLE);
if (!res) {
res = sethostname(buf.buf, buf.len);
PyBuffer_Release(&buf);
}
if (flag)
Py_DECREF(hnobj);
if (res)
return set_error();
Py_RETURN_NONE;
}
#endif
/* Python interface to gethostbyname(name). */
/*ARGSUSED*/
static PyObject *
socket_gethostbyname(PyObject *self, PyObject *args)
{
char *name;
sock_addr_t addrbuf;
PyObject *ret = NULL;
if (!PyArg_ParseTuple(args, "et:gethostbyname", "idna", &name))
return NULL;
if (setipaddr(name, SAS2SA(&addrbuf), sizeof(addrbuf), AF_INET) < 0)
goto finally;
ret = makeipaddr(SAS2SA(&addrbuf), sizeof(struct sockaddr_in));
finally:
PyMem_Free(name);
return ret;
}
PyDoc_STRVAR(gethostbyname_doc,
"gethostbyname(host) -> address\n\
\n\
Return the IP address (a string of the form '255.255.255.255') for a host.");
/* Convenience function common to gethostbyname_ex and gethostbyaddr */
static PyObject *
gethost_common(struct hostent *h, struct sockaddr *addr, int alen, int af)
{
char **pch;
PyObject *rtn_tuple = (PyObject *)NULL;
PyObject *name_list = (PyObject *)NULL;
PyObject *addr_list = (PyObject *)NULL;
PyObject *tmp;
if (h == NULL) {
/* Let's get real error message to return */
set_herror(h_errno);
return NULL;
}
if (h->h_addrtype != af) {
/* Let's get real error message to return */
errno = EAFNOSUPPORT;
PyErr_SetFromErrno(PyExc_OSError);
return NULL;
}
switch (af) {
case AF_INET:
if (alen < sizeof(struct sockaddr_in))
return NULL;
break;
#ifdef ENABLE_IPV6
case AF_INET6:
if (alen < sizeof(struct sockaddr_in6))
return NULL;
break;
#endif
}
if ((name_list = PyList_New(0)) == NULL)
goto err;
if ((addr_list = PyList_New(0)) == NULL)
goto err;
/* SF #1511317: h_aliases can be NULL */
if (h->h_aliases) {
for (pch = h->h_aliases; *pch != NULL; pch++) {
int status;
tmp = PyUnicode_FromString(*pch);
if (tmp == NULL)
goto err;
status = PyList_Append(name_list, tmp);
Py_DECREF(tmp);
if (status)
goto err;
}
}
for (pch = h->h_addr_list; *pch != NULL; pch++) {
int status;
switch (af) {
case AF_INET:
{
struct sockaddr_in sin;
memset(&sin, 0, sizeof(sin));
sin.sin_family = af;
#ifdef HAVE_SOCKADDR_SA_LEN
sin.sin_len = sizeof(sin);
#endif
memcpy(&sin.sin_addr, *pch, sizeof(sin.sin_addr));
tmp = makeipaddr((struct sockaddr *)&sin, sizeof(sin));
if (pch == h->h_addr_list && alen >= sizeof(sin))
memcpy((char *) addr, &sin, sizeof(sin));
break;
}
#ifdef ENABLE_IPV6
case AF_INET6:
{
struct sockaddr_in6 sin6;
memset(&sin6, 0, sizeof(sin6));
sin6.sin6_family = af;
#ifdef HAVE_SOCKADDR_SA_LEN
sin6.sin6_len = sizeof(sin6);
#endif
memcpy(&sin6.sin6_addr, *pch, sizeof(sin6.sin6_addr));
tmp = makeipaddr((struct sockaddr *)&sin6,
sizeof(sin6));
if (pch == h->h_addr_list && alen >= sizeof(sin6))
memcpy((char *) addr, &sin6, sizeof(sin6));
break;
}
#endif
default: /* can't happen */
PyErr_SetString(PyExc_OSError,
"unsupported address family");
return NULL;
}
if (tmp == NULL)
goto err;
status = PyList_Append(addr_list, tmp);
Py_DECREF(tmp);
if (status)
goto err;
}
rtn_tuple = Py_BuildValue("sOO", h->h_name, name_list, addr_list);
err:
Py_XDECREF(name_list);
Py_XDECREF(addr_list);
return rtn_tuple;
}
/* Python interface to gethostbyname_ex(name). */
/*ARGSUSED*/
static PyObject *
socket_gethostbyname_ex(PyObject *self, PyObject *args)
{
char *name;
struct hostent *h;
sock_addr_t addr;
struct sockaddr *sa;
PyObject *ret = NULL;
#ifdef HAVE_GETHOSTBYNAME_R
struct hostent hp_allocated;
#ifdef HAVE_GETHOSTBYNAME_R_3_ARG
struct hostent_data data;
#else
char buf[16384];
int buf_len = (sizeof buf) - 1;
int errnop;
#endif
#ifdef HAVE_GETHOSTBYNAME_R_3_ARG
int result;
#endif
#endif /* HAVE_GETHOSTBYNAME_R */
if (!PyArg_ParseTuple(args, "et:gethostbyname_ex", "idna", &name))
return NULL;
if (setipaddr(name, SAS2SA(&addr), sizeof(addr), AF_INET) < 0)
goto finally;
Py_BEGIN_ALLOW_THREADS
#ifdef HAVE_GETHOSTBYNAME_R
#if defined(HAVE_GETHOSTBYNAME_R_6_ARG)
gethostbyname_r(name, &hp_allocated, buf, buf_len,
&h, &errnop);
#elif defined(HAVE_GETHOSTBYNAME_R_5_ARG)
h = gethostbyname_r(name, &hp_allocated, buf, buf_len, &errnop);
#else /* HAVE_GETHOSTBYNAME_R_3_ARG */
memset((void *) &data, '\0', sizeof(data));
result = gethostbyname_r(name, &hp_allocated, &data);
h = (result != 0) ? NULL : &hp_allocated;
#endif
#else /* not HAVE_GETHOSTBYNAME_R */
#ifdef USE_GETHOSTBYNAME_LOCK
PyThread_acquire_lock(netdb_lock, 1);
#endif
h = gethostbyname(name);
#endif /* HAVE_GETHOSTBYNAME_R */
Py_END_ALLOW_THREADS
/* Some C libraries would require addr.__ss_family instead of
addr.ss_family.
Therefore, we cast the sockaddr_storage into sockaddr to
access sa_family. */
sa = SAS2SA(&addr);
ret = gethost_common(h, SAS2SA(&addr), sizeof(addr),
sa->sa_family);
#ifdef USE_GETHOSTBYNAME_LOCK
PyThread_release_lock(netdb_lock);
#endif
finally:
PyMem_Free(name);
return ret;
}
PyDoc_STRVAR(ghbn_ex_doc,
"gethostbyname_ex(host) -> (name, aliaslist, addresslist)\n\
\n\
Return the true host name, a list of aliases, and a list of IP addresses,\n\
for a host. The host argument is a string giving a host name or IP number.");
/* Python interface to gethostbyaddr(IP). */
/*ARGSUSED*/
static PyObject *
socket_gethostbyaddr(PyObject *self, PyObject *args)
{
sock_addr_t addr;
struct sockaddr *sa = SAS2SA(&addr);
char *ip_num;
struct hostent *h;
PyObject *ret = NULL;
#ifdef HAVE_GETHOSTBYNAME_R
struct hostent hp_allocated;
#ifdef HAVE_GETHOSTBYNAME_R_3_ARG
struct hostent_data data;
#else
/* glibcs up to 2.10 assume that the buf argument to
gethostbyaddr_r is 8-byte aligned, which at least llvm-gcc
does not ensure. The attribute below instructs the compiler
to maintain this alignment. */
char buf[16384] Py_ALIGNED(8);
int buf_len = (sizeof buf) - 1;
int errnop;
#endif
#ifdef HAVE_GETHOSTBYNAME_R_3_ARG
int result;
#endif
#endif /* HAVE_GETHOSTBYNAME_R */
char *ap;
int al;
int af;
if (!PyArg_ParseTuple(args, "et:gethostbyaddr", "idna", &ip_num))
return NULL;
af = AF_UNSPEC;
if (setipaddr(ip_num, sa, sizeof(addr), af) < 0)
goto finally;
af = sa->sa_family;
ap = NULL;
/* al = 0; */
switch (af) {
case AF_INET:
ap = (char *)&((struct sockaddr_in *)sa)->sin_addr;
al = sizeof(((struct sockaddr_in *)sa)->sin_addr);
break;
#ifdef ENABLE_IPV6
case AF_INET6:
ap = (char *)&((struct sockaddr_in6 *)sa)->sin6_addr;
al = sizeof(((struct sockaddr_in6 *)sa)->sin6_addr);
break;
#endif
default:
PyErr_SetString(PyExc_OSError, "unsupported address family");
goto finally;
}
Py_BEGIN_ALLOW_THREADS
#ifdef HAVE_GETHOSTBYNAME_R
#if defined(HAVE_GETHOSTBYNAME_R_6_ARG)
gethostbyaddr_r(ap, al, af,
&hp_allocated, buf, buf_len,
&h, &errnop);
#elif defined(HAVE_GETHOSTBYNAME_R_5_ARG)
h = gethostbyaddr_r(ap, al, af,
&hp_allocated, buf, buf_len, &errnop);
#else /* HAVE_GETHOSTBYNAME_R_3_ARG */
memset((void *) &data, '\0', sizeof(data));
result = gethostbyaddr_r(ap, al, af, &hp_allocated, &data);
h = (result != 0) ? NULL : &hp_allocated;
#endif
#else /* not HAVE_GETHOSTBYNAME_R */
#ifdef USE_GETHOSTBYNAME_LOCK
PyThread_acquire_lock(netdb_lock, 1);
#endif
h = gethostbyaddr(ap, al, af);
#endif /* HAVE_GETHOSTBYNAME_R */
Py_END_ALLOW_THREADS
ret = gethost_common(h, SAS2SA(&addr), sizeof(addr), af);
#ifdef USE_GETHOSTBYNAME_LOCK
PyThread_release_lock(netdb_lock);
#endif
finally:
PyMem_Free(ip_num);
return ret;
}
PyDoc_STRVAR(gethostbyaddr_doc,
"gethostbyaddr(host) -> (name, aliaslist, addresslist)\n\
\n\
Return the true host name, a list of aliases, and a list of IP addresses,\n\
for a host. The host argument is a string giving a host name or IP number.");
/* Python interface to getservbyname(name).
This only returns the port number, since the other info is already
known or not useful (like the list of aliases). */
/*ARGSUSED*/
static PyObject *
socket_getservbyname(PyObject *self, PyObject *args)
{
char *name, *proto=NULL;
struct servent *sp;
if (!PyArg_ParseTuple(args, "s|s:getservbyname", &name, &proto))
return NULL;
Py_BEGIN_ALLOW_THREADS
sp = getservbyname(name, proto);
Py_END_ALLOW_THREADS
if (sp == NULL) {
PyErr_SetString(PyExc_OSError, "service/proto not found");
return NULL;
}
return PyLong_FromLong((long) ntohs(sp->s_port));
}
PyDoc_STRVAR(getservbyname_doc,
"getservbyname(servicename[, protocolname]) -> integer\n\
\n\
Return a port number from a service name and protocol name.\n\
The optional protocol name, if given, should be 'tcp' or 'udp',\n\
otherwise any protocol will match.");
/* Python interface to getservbyport(port).
This only returns the service name, since the other info is already
known or not useful (like the list of aliases). */
/*ARGSUSED*/
static PyObject *
socket_getservbyport(PyObject *self, PyObject *args)
{
int port;
char *proto=NULL;
struct servent *sp;
if (!PyArg_ParseTuple(args, "i|s:getservbyport", &port, &proto))
return NULL;
if (port < 0 || port > 0xffff) {
PyErr_SetString(
PyExc_OverflowError,
"getservbyport: port must be 0-65535.");
return NULL;
}
Py_BEGIN_ALLOW_THREADS
sp = getservbyport(htons((short)port), proto);
Py_END_ALLOW_THREADS
if (sp == NULL) {
PyErr_SetString(PyExc_OSError, "port/proto not found");
return NULL;
}
return PyUnicode_FromString(sp->s_name);
}
PyDoc_STRVAR(getservbyport_doc,
"getservbyport(port[, protocolname]) -> string\n\
\n\
Return the service name from a port number and protocol name.\n\
The optional protocol name, if given, should be 'tcp' or 'udp',\n\
otherwise any protocol will match.");
/* Python interface to getprotobyname(name).
This only returns the protocol number, since the other info is
already known or not useful (like the list of aliases). */
/*ARGSUSED*/
static PyObject *
socket_getprotobyname(PyObject *self, PyObject *args)
{
char *name;
struct protoent *sp;
if (!PyArg_ParseTuple(args, "s:getprotobyname", &name))
return NULL;
Py_BEGIN_ALLOW_THREADS
sp = getprotobyname(name);
Py_END_ALLOW_THREADS
if (sp == NULL) {
PyErr_SetString(PyExc_OSError, "protocol not found");
return NULL;
}
return PyLong_FromLong((long) sp->p_proto);
}
PyDoc_STRVAR(getprotobyname_doc,
"getprotobyname(name) -> integer\n\
\n\
Return the protocol number for the named protocol. (Rarely used.)");
#ifndef NO_DUP
/* dup() function for socket fds */
static PyObject *
socket_dup(PyObject *self, PyObject *fdobj)
{
SOCKET_T fd, newfd;
PyObject *newfdobj;
fd = PyLong_AsSocket_t(fdobj);
if (fd == (SOCKET_T)(-1) && PyErr_Occurred())
return NULL;
newfd = dup_socket(fd);
if (newfd == INVALID_SOCKET)
return set_error();
newfdobj = PyLong_FromSocket_t(newfd);
if (newfdobj == NULL)
SOCKETCLOSE(newfd);
return newfdobj;
}
PyDoc_STRVAR(dup_doc,
"dup(integer) -> integer\n\
\n\
Duplicate an integer socket file descriptor. This is like os.dup(), but for\n\
sockets; on some platforms os.dup() won't work for socket file descriptors.");
#endif
#ifdef HAVE_SOCKETPAIR
/* Create a pair of sockets using the socketpair() function.
Arguments as for socket() except the default family is AF_UNIX if
defined on the platform; otherwise, the default is AF_INET. */
/*ARGSUSED*/
static PyObject *
socket_socketpair(PyObject *self, PyObject *args)
{
PySocketSockObject *s0 = NULL, *s1 = NULL;
SOCKET_T sv[2];
int family, type = SOCK_STREAM, proto = 0;
PyObject *res = NULL;
#if defined(AF_UNIX)
family = AF_UNIX;
#else
family = AF_INET;
#endif
if (!PyArg_ParseTuple(args, "|iii:socketpair",
&family, &type, &proto))
return NULL;
/* Create a pair of socket fds */
if (socketpair(family, type, proto, sv) < 0)
return set_error();
s0 = new_sockobject(sv[0], family, type, proto);
if (s0 == NULL)
goto finally;
s1 = new_sockobject(sv[1], family, type, proto);
if (s1 == NULL)
goto finally;
res = PyTuple_Pack(2, s0, s1);
finally:
if (res == NULL) {
if (s0 == NULL)
SOCKETCLOSE(sv[0]);
if (s1 == NULL)
SOCKETCLOSE(sv[1]);
}
Py_XDECREF(s0);
Py_XDECREF(s1);
return res;
}
PyDoc_STRVAR(socketpair_doc,
"socketpair([family[, type[, proto]]]) -> (socket object, socket object)\n\
\n\
Create a pair of socket objects from the sockets returned by the platform\n\
socketpair() function.\n\
The arguments are the same as for socket() except the default family is\n\
AF_UNIX if defined on the platform; otherwise, the default is AF_INET.");
#endif /* HAVE_SOCKETPAIR */
static PyObject *
socket_ntohs(PyObject *self, PyObject *args)
{
int x1, x2;
if (!PyArg_ParseTuple(args, "i:ntohs", &x1)) {
return NULL;
}
if (x1 < 0) {
PyErr_SetString(PyExc_OverflowError,
"can't convert negative number to unsigned long");
return NULL;
}
x2 = (unsigned int)ntohs((unsigned short)x1);
return PyLong_FromLong(x2);
}
PyDoc_STRVAR(ntohs_doc,
"ntohs(integer) -> integer\n\
\n\
Convert a 16-bit integer from network to host byte order.");
static PyObject *
socket_ntohl(PyObject *self, PyObject *arg)
{
unsigned long x;
if (PyLong_Check(arg)) {
x = PyLong_AsUnsignedLong(arg);
if (x == (unsigned long) -1 && PyErr_Occurred())
return NULL;
#if SIZEOF_LONG > 4
{
unsigned long y;
/* only want the trailing 32 bits */
y = x & 0xFFFFFFFFUL;
if (y ^ x)
return PyErr_Format(PyExc_OverflowError,
"long int larger than 32 bits");
x = y;
}
#endif
}
else
return PyErr_Format(PyExc_TypeError,
"expected int/long, %s found",
Py_TYPE(arg)->tp_name);
if (x == (unsigned long) -1 && PyErr_Occurred())
return NULL;
return PyLong_FromUnsignedLong(ntohl(x));
}
PyDoc_STRVAR(ntohl_doc,
"ntohl(integer) -> integer\n\
\n\
Convert a 32-bit integer from network to host byte order.");
static PyObject *
socket_htons(PyObject *self, PyObject *args)
{
int x1, x2;
if (!PyArg_ParseTuple(args, "i:htons", &x1)) {
return NULL;
}
if (x1 < 0) {
PyErr_SetString(PyExc_OverflowError,
"can't convert negative number to unsigned long");
return NULL;
}
x2 = (unsigned int)htons((unsigned short)x1);
return PyLong_FromLong(x2);
}
PyDoc_STRVAR(htons_doc,
"htons(integer) -> integer\n\
\n\
Convert a 16-bit integer from host to network byte order.");
static PyObject *
socket_htonl(PyObject *self, PyObject *arg)
{
unsigned long x;
if (PyLong_Check(arg)) {
x = PyLong_AsUnsignedLong(arg);
if (x == (unsigned long) -1 && PyErr_Occurred())
return NULL;
#if SIZEOF_LONG > 4
{
unsigned long y;
/* only want the trailing 32 bits */
y = x & 0xFFFFFFFFUL;
if (y ^ x)
return PyErr_Format(PyExc_OverflowError,
"long int larger than 32 bits");
x = y;
}
#endif
}
else
return PyErr_Format(PyExc_TypeError,
"expected int/long, %s found",
Py_TYPE(arg)->tp_name);
return PyLong_FromUnsignedLong(htonl((unsigned long)x));
}
PyDoc_STRVAR(htonl_doc,
"htonl(integer) -> integer\n\
\n\
Convert a 32-bit integer from host to network byte order.");
/* socket.inet_aton() and socket.inet_ntoa() functions. */
PyDoc_STRVAR(inet_aton_doc,
"inet_aton(string) -> bytes giving packed 32-bit IP representation\n\
\n\
Convert an IP address in string format (123.45.67.89) to the 32-bit packed\n\
binary format used in low-level network functions.");
static PyObject*
socket_inet_aton(PyObject *self, PyObject *args)
{
#ifndef INADDR_NONE
#define INADDR_NONE (-1)
#endif
#ifdef HAVE_INET_ATON
struct in_addr buf;
#endif
#if !defined(HAVE_INET_ATON) || defined(USE_INET_ATON_WEAKLINK)
#if (SIZEOF_INT != 4)
#error "Not sure if in_addr_t exists and int is not 32-bits."
#endif
/* Have to use inet_addr() instead */
unsigned int packed_addr;
#endif
char *ip_addr;
if (!PyArg_ParseTuple(args, "s:inet_aton", &ip_addr))
return NULL;
#ifdef HAVE_INET_ATON
#ifdef USE_INET_ATON_WEAKLINK
if (inet_aton != NULL) {
#endif
if (inet_aton(ip_addr, &buf))
return PyBytes_FromStringAndSize((char *)(&buf),
sizeof(buf));
PyErr_SetString(PyExc_OSError,
"illegal IP address string passed to inet_aton");
return NULL;
#ifdef USE_INET_ATON_WEAKLINK
} else {
#endif
#endif
#if !defined(HAVE_INET_ATON) || defined(USE_INET_ATON_WEAKLINK)
/* special-case this address as inet_addr might return INADDR_NONE
* for this */
if (strcmp(ip_addr, "255.255.255.255") == 0) {
packed_addr = 0xFFFFFFFF;
} else {
packed_addr = inet_addr(ip_addr);
if (packed_addr == INADDR_NONE) { /* invalid address */
PyErr_SetString(PyExc_OSError,
"illegal IP address string passed to inet_aton");
return NULL;
}
}
return PyBytes_FromStringAndSize((char *) &packed_addr,
sizeof(packed_addr));
#ifdef USE_INET_ATON_WEAKLINK
}
#endif
#endif
}
PyDoc_STRVAR(inet_ntoa_doc,
"inet_ntoa(packed_ip) -> ip_address_string\n\
\n\
Convert an IP address from 32-bit packed binary format to string format");
static PyObject*
socket_inet_ntoa(PyObject *self, PyObject *args)
{
char *packed_str;
int addr_len;
struct in_addr packed_addr;
if (!PyArg_ParseTuple(args, "y#:inet_ntoa", &packed_str, &addr_len)) {
return NULL;
}
if (addr_len != sizeof(packed_addr)) {
PyErr_SetString(PyExc_OSError,
"packed IP wrong length for inet_ntoa");
return NULL;
}
memcpy(&packed_addr, packed_str, addr_len);
return PyUnicode_FromString(inet_ntoa(packed_addr));
}
#ifdef HAVE_INET_PTON
PyDoc_STRVAR(inet_pton_doc,
"inet_pton(af, ip) -> packed IP address string\n\
\n\
Convert an IP address from string format to a packed string suitable\n\
for use with low-level network functions.");
static PyObject *
socket_inet_pton(PyObject *self, PyObject *args)
{
int af;
char* ip;
int retval;
#ifdef ENABLE_IPV6
char packed[MAX(sizeof(struct in_addr), sizeof(struct in6_addr))];
#else
char packed[sizeof(struct in_addr)];
#endif
if (!PyArg_ParseTuple(args, "is:inet_pton", &af, &ip)) {
return NULL;
}
#if !defined(ENABLE_IPV6) && defined(AF_INET6)
if(af == AF_INET6) {
PyErr_SetString(PyExc_OSError,
"can't use AF_INET6, IPv6 is disabled");
return NULL;
}
#endif
retval = inet_pton(af, ip, packed);
if (retval < 0) {
PyErr_SetFromErrno(PyExc_OSError);
return NULL;
} else if (retval == 0) {
PyErr_SetString(PyExc_OSError,
"illegal IP address string passed to inet_pton");
return NULL;
} else if (af == AF_INET) {
return PyBytes_FromStringAndSize(packed,
sizeof(struct in_addr));
#ifdef ENABLE_IPV6
} else if (af == AF_INET6) {
return PyBytes_FromStringAndSize(packed,
sizeof(struct in6_addr));
#endif
} else {
PyErr_SetString(PyExc_OSError, "unknown address family");
return NULL;
}
}
PyDoc_STRVAR(inet_ntop_doc,
"inet_ntop(af, packed_ip) -> string formatted IP address\n\
\n\
Convert a packed IP address of the given family to string format.");
static PyObject *
socket_inet_ntop(PyObject *self, PyObject *args)
{
int af;
char* packed;
int len;
const char* retval;
#ifdef ENABLE_IPV6
char ip[MAX(INET_ADDRSTRLEN, INET6_ADDRSTRLEN) + 1];
#else
char ip[INET_ADDRSTRLEN + 1];
#endif
/* Guarantee NUL-termination for PyUnicode_FromString() below */
memset((void *) &ip[0], '\0', sizeof(ip));
if (!PyArg_ParseTuple(args, "iy#:inet_ntop", &af, &packed, &len)) {
return NULL;
}
if (af == AF_INET) {
if (len != sizeof(struct in_addr)) {
PyErr_SetString(PyExc_ValueError,
"invalid length of packed IP address string");
return NULL;
}
#ifdef ENABLE_IPV6
} else if (af == AF_INET6) {
if (len != sizeof(struct in6_addr)) {
PyErr_SetString(PyExc_ValueError,
"invalid length of packed IP address string");
return NULL;
}
#endif
} else {
PyErr_Format(PyExc_ValueError,
"unknown address family %d", af);
return NULL;
}
retval = inet_ntop(af, packed, ip, sizeof(ip));
if (!retval) {
PyErr_SetFromErrno(PyExc_OSError);
return NULL;
} else {
return PyUnicode_FromString(retval);
}
/* NOTREACHED */
PyErr_SetString(PyExc_RuntimeError, "invalid handling of inet_ntop");
return NULL;
}
#endif /* HAVE_INET_PTON */
/* Python interface to getaddrinfo(host, port). */
/*ARGSUSED*/
static PyObject *
socket_getaddrinfo(PyObject *self, PyObject *args, PyObject* kwargs)
{
static char* kwnames[] = {"host", "port", "family", "type", "proto",
"flags", 0};
struct addrinfo hints, *res;
struct addrinfo *res0 = NULL;
PyObject *hobj = NULL;
PyObject *pobj = (PyObject *)NULL;
char pbuf[30];
char *hptr, *pptr;
int family, socktype, protocol, flags;
int error;
PyObject *all = (PyObject *)NULL;
PyObject *idna = NULL;
family = socktype = protocol = flags = 0;
family = AF_UNSPEC;
if (!PyArg_ParseTupleAndKeywords(args, kwargs, "OO|iiii:getaddrinfo",
kwnames, &hobj, &pobj, &family, &socktype,
&protocol, &flags)) {
return NULL;
}
if (hobj == Py_None) {
hptr = NULL;
} else if (PyUnicode_Check(hobj)) {
_Py_IDENTIFIER(encode);
idna = _PyObject_CallMethodId(hobj, &PyId_encode, "s", "idna");
if (!idna)
return NULL;
assert(PyBytes_Check(idna));
hptr = PyBytes_AS_STRING(idna);
} else if (PyBytes_Check(hobj)) {
hptr = PyBytes_AsString(hobj);
} else {
PyErr_SetString(PyExc_TypeError,
"getaddrinfo() argument 1 must be string or None");
return NULL;
}
if (PyLong_CheckExact(pobj)) {
long value = PyLong_AsLong(pobj);
if (value == -1 && PyErr_Occurred())
goto err;
PyOS_snprintf(pbuf, sizeof(pbuf), "%ld", value);
pptr = pbuf;
} else if (PyUnicode_Check(pobj)) {
pptr = _PyUnicode_AsString(pobj);
if (pptr == NULL)
goto err;
} else if (PyBytes_Check(pobj)) {
pptr = PyBytes_AS_STRING(pobj);
} else if (pobj == Py_None) {
pptr = (char *)NULL;
} else {
PyErr_SetString(PyExc_OSError, "Int or String expected");
goto err;
}
memset(&hints, 0, sizeof(hints));
hints.ai_family = family;
hints.ai_socktype = socktype;
hints.ai_protocol = protocol;
hints.ai_flags = flags;
Py_BEGIN_ALLOW_THREADS
ACQUIRE_GETADDRINFO_LOCK
error = getaddrinfo(hptr, pptr, &hints, &res0);
Py_END_ALLOW_THREADS
RELEASE_GETADDRINFO_LOCK /* see comment in setipaddr() */
if (error) {
set_gaierror(error);
goto err;
}
if ((all = PyList_New(0)) == NULL)
goto err;
for (res = res0; res; res = res->ai_next) {
PyObject *single;
PyObject *addr =
makesockaddr(-1, res->ai_addr, res->ai_addrlen, protocol);
if (addr == NULL)
goto err;
single = Py_BuildValue("iiisO", res->ai_family,
res->ai_socktype, res->ai_protocol,
res->ai_canonname ? res->ai_canonname : "",
addr);
Py_DECREF(addr);
if (single == NULL)
goto err;
if (PyList_Append(all, single))
goto err;
Py_XDECREF(single);
}
Py_XDECREF(idna);
if (res0)
freeaddrinfo(res0);
return all;
err:
Py_XDECREF(all);
Py_XDECREF(idna);
if (res0)
freeaddrinfo(res0);
return (PyObject *)NULL;
}
PyDoc_STRVAR(getaddrinfo_doc,
"getaddrinfo(host, port [, family, socktype, proto, flags])\n\
-> list of (family, socktype, proto, canonname, sockaddr)\n\
\n\
Resolve host and port into addrinfo struct.");
/* Python interface to getnameinfo(sa, flags). */
/*ARGSUSED*/
static PyObject *
socket_getnameinfo(PyObject *self, PyObject *args)
{
PyObject *sa = (PyObject *)NULL;
int flags;
char *hostp;
int port;
unsigned int flowinfo, scope_id;
char hbuf[NI_MAXHOST], pbuf[NI_MAXSERV];
struct addrinfo hints, *res = NULL;
int error;
PyObject *ret = (PyObject *)NULL;
flags = flowinfo = scope_id = 0;
if (!PyArg_ParseTuple(args, "Oi:getnameinfo", &sa, &flags))
return NULL;
if (!PyTuple_Check(sa)) {
PyErr_SetString(PyExc_TypeError,
"getnameinfo() argument 1 must be a tuple");
return NULL;
}
if (!PyArg_ParseTuple(sa, "si|II",
&hostp, &port, &flowinfo, &scope_id))
return NULL;
if (flowinfo > 0xfffff) {
PyErr_SetString(PyExc_OverflowError,
"getsockaddrarg: flowinfo must be 0-1048575.");
return NULL;
}
PyOS_snprintf(pbuf, sizeof(pbuf), "%d", port);
memset(&hints, 0, sizeof(hints));
hints.ai_family = AF_UNSPEC;
hints.ai_socktype = SOCK_DGRAM; /* make numeric port happy */
hints.ai_flags = AI_NUMERICHOST; /* don't do any name resolution */
Py_BEGIN_ALLOW_THREADS
ACQUIRE_GETADDRINFO_LOCK
error = getaddrinfo(hostp, pbuf, &hints, &res);
Py_END_ALLOW_THREADS
RELEASE_GETADDRINFO_LOCK /* see comment in setipaddr() */
if (error) {
set_gaierror(error);
goto fail;
}
if (res->ai_next) {
PyErr_SetString(PyExc_OSError,
"sockaddr resolved to multiple addresses");
goto fail;
}
switch (res->ai_family) {
case AF_INET:
{
if (PyTuple_GET_SIZE(sa) != 2) {
PyErr_SetString(PyExc_OSError,
"IPv4 sockaddr must be 2 tuple");
goto fail;
}
break;
}
#ifdef ENABLE_IPV6
case AF_INET6:
{
struct sockaddr_in6 *sin6;
sin6 = (struct sockaddr_in6 *)res->ai_addr;
sin6->sin6_flowinfo = htonl(flowinfo);
sin6->sin6_scope_id = scope_id;
break;
}
#endif
}
error = getnameinfo(res->ai_addr, (socklen_t) res->ai_addrlen,
hbuf, sizeof(hbuf), pbuf, sizeof(pbuf), flags);
if (error) {
set_gaierror(error);
goto fail;
}
ret = Py_BuildValue("ss", hbuf, pbuf);
fail:
if (res)
freeaddrinfo(res);
return ret;
}
PyDoc_STRVAR(getnameinfo_doc,
"getnameinfo(sockaddr, flags) --> (host, port)\n\
\n\
Get host and port for a sockaddr.");
/* Python API to getting and setting the default timeout value. */
static PyObject *
socket_getdefaulttimeout(PyObject *self)
{
if (defaulttimeout < 0.0) {
Py_INCREF(Py_None);
return Py_None;
}
else
return PyFloat_FromDouble(defaulttimeout);
}
PyDoc_STRVAR(getdefaulttimeout_doc,
"getdefaulttimeout() -> timeout\n\
\n\
Returns the default timeout in seconds (float) for new socket objects.\n\
A value of None indicates that new socket objects have no timeout.\n\
When the socket module is first imported, the default is None.");
static PyObject *
socket_setdefaulttimeout(PyObject *self, PyObject *arg)
{
double timeout;
if (arg == Py_None)
timeout = -1.0;
else {
timeout = PyFloat_AsDouble(arg);
if (timeout < 0.0) {
if (!PyErr_Occurred())
PyErr_SetString(PyExc_ValueError,
"Timeout value out of range");
return NULL;
}
}
defaulttimeout = timeout;
Py_INCREF(Py_None);
return Py_None;
}
PyDoc_STRVAR(setdefaulttimeout_doc,
"setdefaulttimeout(timeout)\n\
\n\
Set the default timeout in seconds (float) for new socket objects.\n\
A value of None indicates that new socket objects have no timeout.\n\
When the socket module is first imported, the default is None.");
#ifdef HAVE_IF_NAMEINDEX
/* Python API for getting interface indices and names */
static PyObject *
socket_if_nameindex(PyObject *self, PyObject *arg)
{
PyObject *list;
int i;
struct if_nameindex *ni;
ni = if_nameindex();
if (ni == NULL) {
PyErr_SetFromErrno(PyExc_OSError);
return NULL;
}
list = PyList_New(0);
if (list == NULL) {
if_freenameindex(ni);
return NULL;
}
for (i = 0; ni[i].if_index != 0 && i < INT_MAX; i++) {
PyObject *ni_tuple = Py_BuildValue("IO&",
ni[i].if_index, PyUnicode_DecodeFSDefault, ni[i].if_name);
if (ni_tuple == NULL || PyList_Append(list, ni_tuple) == -1) {
Py_XDECREF(ni_tuple);
Py_DECREF(list);
if_freenameindex(ni);
return NULL;
}
Py_DECREF(ni_tuple);
}
if_freenameindex(ni);
return list;
}
PyDoc_STRVAR(if_nameindex_doc,
"if_nameindex()\n\
\n\
Returns a list of network interface information (index, name) tuples.");
static PyObject *
socket_if_nametoindex(PyObject *self, PyObject *args)
{
PyObject *oname;
unsigned long index;
if (!PyArg_ParseTuple(args, "O&:if_nametoindex",
PyUnicode_FSConverter, &oname))
return NULL;
index = if_nametoindex(PyBytes_AS_STRING(oname));
Py_DECREF(oname);
if (index == 0) {
/* if_nametoindex() doesn't set errno */
PyErr_SetString(PyExc_OSError, "no interface with this name");
return NULL;
}
return PyLong_FromUnsignedLong(index);
}
PyDoc_STRVAR(if_nametoindex_doc,
"if_nametoindex(if_name)\n\
\n\
Returns the interface index corresponding to the interface name if_name.");
static PyObject *
socket_if_indextoname(PyObject *self, PyObject *arg)
{
unsigned long index;
char name[IF_NAMESIZE + 1];
index = PyLong_AsUnsignedLong(arg);
if (index == (unsigned long) -1)
return NULL;
if (if_indextoname(index, name) == NULL) {
PyErr_SetFromErrno(PyExc_OSError);
return NULL;
}
return PyUnicode_DecodeFSDefault(name);
}
PyDoc_STRVAR(if_indextoname_doc,
"if_indextoname(if_index)\n\
\n\
Returns the interface name corresponding to the interface index if_index.");
#endif /* HAVE_IF_NAMEINDEX */
#ifdef CMSG_LEN
/* Python interface to CMSG_LEN(length). */
static PyObject *
socket_CMSG_LEN(PyObject *self, PyObject *args)
{
Py_ssize_t length;
size_t result;
if (!PyArg_ParseTuple(args, "n:CMSG_LEN", &length))
return NULL;
if (length < 0 || !get_CMSG_LEN(length, &result)) {
PyErr_Format(PyExc_OverflowError, "CMSG_LEN() argument out of range");
return NULL;
}
return PyLong_FromSize_t(result);
}
PyDoc_STRVAR(CMSG_LEN_doc,
"CMSG_LEN(length) -> control message length\n\
\n\
Return the total length, without trailing padding, of an ancillary\n\
data item with associated data of the given length. This value can\n\
often be used as the buffer size for recvmsg() to receive a single\n\
item of ancillary data, but RFC 3542 requires portable applications to\n\
use CMSG_SPACE() and thus include space for padding, even when the\n\
item will be the last in the buffer. Raises OverflowError if length\n\
is outside the permissible range of values.");
#ifdef CMSG_SPACE
/* Python interface to CMSG_SPACE(length). */
static PyObject *
socket_CMSG_SPACE(PyObject *self, PyObject *args)
{
Py_ssize_t length;
size_t result;
if (!PyArg_ParseTuple(args, "n:CMSG_SPACE", &length))
return NULL;
if (length < 0 || !get_CMSG_SPACE(length, &result)) {
PyErr_SetString(PyExc_OverflowError,
"CMSG_SPACE() argument out of range");
return NULL;
}
return PyLong_FromSize_t(result);
}
PyDoc_STRVAR(CMSG_SPACE_doc,
"CMSG_SPACE(length) -> buffer size\n\
\n\
Return the buffer size needed for recvmsg() to receive an ancillary\n\
data item with associated data of the given length, along with any\n\
trailing padding. The buffer space needed to receive multiple items\n\
is the sum of the CMSG_SPACE() values for their associated data\n\
lengths. Raises OverflowError if length is outside the permissible\n\
range of values.");
#endif /* CMSG_SPACE */
#endif /* CMSG_LEN */
/* List of functions exported by this module. */
static PyMethodDef socket_methods[] = {
{"gethostbyname", socket_gethostbyname,
METH_VARARGS, gethostbyname_doc},
{"gethostbyname_ex", socket_gethostbyname_ex,
METH_VARARGS, ghbn_ex_doc},
{"gethostbyaddr", socket_gethostbyaddr,
METH_VARARGS, gethostbyaddr_doc},
{"gethostname", socket_gethostname,
METH_NOARGS, gethostname_doc},
#ifdef HAVE_SETHOSTNAME
{"sethostname", socket_sethostname,
METH_VARARGS, sethostname_doc},
#endif
{"getservbyname", socket_getservbyname,
METH_VARARGS, getservbyname_doc},
{"getservbyport", socket_getservbyport,
METH_VARARGS, getservbyport_doc},
{"getprotobyname", socket_getprotobyname,
METH_VARARGS, getprotobyname_doc},
#ifndef NO_DUP
{"dup", socket_dup,
METH_O, dup_doc},
#endif
#ifdef HAVE_SOCKETPAIR
{"socketpair", socket_socketpair,
METH_VARARGS, socketpair_doc},
#endif
{"ntohs", socket_ntohs,
METH_VARARGS, ntohs_doc},
{"ntohl", socket_ntohl,
METH_O, ntohl_doc},
{"htons", socket_htons,
METH_VARARGS, htons_doc},
{"htonl", socket_htonl,
METH_O, htonl_doc},
{"inet_aton", socket_inet_aton,
METH_VARARGS, inet_aton_doc},
{"inet_ntoa", socket_inet_ntoa,
METH_VARARGS, inet_ntoa_doc},
#ifdef HAVE_INET_PTON
{"inet_pton", socket_inet_pton,
METH_VARARGS, inet_pton_doc},
{"inet_ntop", socket_inet_ntop,
METH_VARARGS, inet_ntop_doc},
#endif
{"getaddrinfo", (PyCFunction)socket_getaddrinfo,
METH_VARARGS | METH_KEYWORDS, getaddrinfo_doc},
{"getnameinfo", socket_getnameinfo,
METH_VARARGS, getnameinfo_doc},
{"getdefaulttimeout", (PyCFunction)socket_getdefaulttimeout,
METH_NOARGS, getdefaulttimeout_doc},
{"setdefaulttimeout", socket_setdefaulttimeout,
METH_O, setdefaulttimeout_doc},
#ifdef HAVE_IF_NAMEINDEX
{"if_nameindex", socket_if_nameindex,
METH_NOARGS, if_nameindex_doc},
{"if_nametoindex", socket_if_nametoindex,
METH_VARARGS, if_nametoindex_doc},
{"if_indextoname", socket_if_indextoname,
METH_O, if_indextoname_doc},
#endif
#ifdef CMSG_LEN
{"CMSG_LEN", socket_CMSG_LEN,
METH_VARARGS, CMSG_LEN_doc},
#ifdef CMSG_SPACE
{"CMSG_SPACE", socket_CMSG_SPACE,
METH_VARARGS, CMSG_SPACE_doc},
#endif
#endif
{NULL, NULL} /* Sentinel */
};
#ifdef MS_WINDOWS
#define OS_INIT_DEFINED
/* Additional initialization and cleanup for Windows */
static void
os_cleanup(void)
{
WSACleanup();
}
static int
os_init(void)
{
WSADATA WSAData;
int ret;
ret = WSAStartup(0x0101, &WSAData);
switch (ret) {
case 0: /* No error */
Py_AtExit(os_cleanup);
return 1; /* Success */
case WSASYSNOTREADY:
PyErr_SetString(PyExc_ImportError,
"WSAStartup failed: network not ready");
break;
case WSAVERNOTSUPPORTED:
case WSAEINVAL:
PyErr_SetString(
PyExc_ImportError,
"WSAStartup failed: requested version not supported");
break;
default:
PyErr_Format(PyExc_ImportError, "WSAStartup failed: error code %d", ret);
break;
}
return 0; /* Failure */
}
#endif /* MS_WINDOWS */
#ifdef PYOS_OS2
#define OS_INIT_DEFINED
/* Additional initialization for OS/2 */
static int
os_init(void)
{
#ifndef PYCC_GCC
int rc = sock_init();
if (rc == 0) {
return 1; /* Success */
}
PyErr_Format(PyExc_ImportError, "OS/2 TCP/IP Error# %d", sock_errno());
return 0; /* Failure */
#else
/* No need to initialize sockets with GCC/EMX */
return 1; /* Success */
#endif
}
#endif /* PYOS_OS2 */
#ifndef OS_INIT_DEFINED
static int
os_init(void)
{
return 1; /* Success */
}
#endif
/* C API table - always add new things to the end for binary
compatibility. */
static
PySocketModule_APIObject PySocketModuleAPI =
{
&sock_type,
NULL,
NULL
};
/* Initialize the _socket module.
This module is actually called "_socket", and there's a wrapper
"socket.py" which implements some additional functionality.
The import of "_socket" may fail with an ImportError exception if
os-specific initialization fails. On Windows, this does WINSOCK
initialization. When WINSOCK is initialized successfully, a call to
WSACleanup() is scheduled to be made at exit time.
*/
PyDoc_STRVAR(socket_doc,
"Implementation module for socket operations.\n\
\n\
See the socket module for documentation.");
static struct PyModuleDef socketmodule = {
PyModuleDef_HEAD_INIT,
PySocket_MODULE_NAME,
socket_doc,
-1,
socket_methods,
NULL,
NULL,
NULL,
NULL
};
PyMODINIT_FUNC
PyInit__socket(void)
{
PyObject *m, *has_ipv6;
if (!os_init())
return NULL;
Py_TYPE(&sock_type) = &PyType_Type;
m = PyModule_Create(&socketmodule);
if (m == NULL)
return NULL;
Py_INCREF(PyExc_OSError);
PySocketModuleAPI.error = PyExc_OSError;
Py_INCREF(PyExc_OSError);
PyModule_AddObject(m, "error", PyExc_OSError);
socket_herror = PyErr_NewException("socket.herror",
PyExc_OSError, NULL);
if (socket_herror == NULL)
return NULL;
Py_INCREF(socket_herror);
PyModule_AddObject(m, "herror", socket_herror);
socket_gaierror = PyErr_NewException("socket.gaierror", PyExc_OSError,
NULL);
if (socket_gaierror == NULL)
return NULL;
Py_INCREF(socket_gaierror);
PyModule_AddObject(m, "gaierror", socket_gaierror);
socket_timeout = PyErr_NewException("socket.timeout",
PyExc_OSError, NULL);
if (socket_timeout == NULL)
return NULL;
PySocketModuleAPI.timeout_error = socket_timeout;
Py_INCREF(socket_timeout);
PyModule_AddObject(m, "timeout", socket_timeout);
Py_INCREF((PyObject *)&sock_type);
if (PyModule_AddObject(m, "SocketType",
(PyObject *)&sock_type) != 0)
return NULL;
Py_INCREF((PyObject *)&sock_type);
if (PyModule_AddObject(m, "socket",
(PyObject *)&sock_type) != 0)
return NULL;
#ifdef ENABLE_IPV6
has_ipv6 = Py_True;
#else
has_ipv6 = Py_False;
#endif
Py_INCREF(has_ipv6);
PyModule_AddObject(m, "has_ipv6", has_ipv6);
/* Export C API */
if (PyModule_AddObject(m, PySocket_CAPI_NAME,
PyCapsule_New(&PySocketModuleAPI, PySocket_CAPSULE_NAME, NULL)
) != 0)
return NULL;
/* Address families (we only support AF_INET and AF_UNIX) */
#ifdef AF_UNSPEC
PyModule_AddIntConstant(m, "AF_UNSPEC", AF_UNSPEC);
#endif
PyModule_AddIntConstant(m, "AF_INET", AF_INET);
#ifdef AF_INET6
PyModule_AddIntConstant(m, "AF_INET6", AF_INET6);
#endif /* AF_INET6 */
#if defined(AF_UNIX)
PyModule_AddIntConstant(m, "AF_UNIX", AF_UNIX);
#endif /* AF_UNIX */
#ifdef AF_AX25
/* Amateur Radio AX.25 */
PyModule_AddIntConstant(m, "AF_AX25", AF_AX25);
#endif
#ifdef AF_IPX
PyModule_AddIntConstant(m, "AF_IPX", AF_IPX); /* Novell IPX */
#endif
#ifdef AF_APPLETALK
/* Appletalk DDP */
PyModule_AddIntConstant(m, "AF_APPLETALK", AF_APPLETALK);
#endif
#ifdef AF_NETROM
/* Amateur radio NetROM */
PyModule_AddIntConstant(m, "AF_NETROM", AF_NETROM);
#endif
#ifdef AF_BRIDGE
/* Multiprotocol bridge */
PyModule_AddIntConstant(m, "AF_BRIDGE", AF_BRIDGE);
#endif
#ifdef AF_ATMPVC
/* ATM PVCs */
PyModule_AddIntConstant(m, "AF_ATMPVC", AF_ATMPVC);
#endif
#ifdef AF_AAL5
/* Reserved for Werner's ATM */
PyModule_AddIntConstant(m, "AF_AAL5", AF_AAL5);
#endif
#ifdef AF_X25
/* Reserved for X.25 project */
PyModule_AddIntConstant(m, "AF_X25", AF_X25);
#endif
#ifdef AF_INET6
PyModule_AddIntConstant(m, "AF_INET6", AF_INET6); /* IP version 6 */
#endif
#ifdef AF_ROSE
/* Amateur Radio X.25 PLP */
PyModule_AddIntConstant(m, "AF_ROSE", AF_ROSE);
#endif
#ifdef AF_DECnet
/* Reserved for DECnet project */
PyModule_AddIntConstant(m, "AF_DECnet", AF_DECnet);
#endif
#ifdef AF_NETBEUI
/* Reserved for 802.2LLC project */
PyModule_AddIntConstant(m, "AF_NETBEUI", AF_NETBEUI);
#endif
#ifdef AF_SECURITY
/* Security callback pseudo AF */
PyModule_AddIntConstant(m, "AF_SECURITY", AF_SECURITY);
#endif
#ifdef AF_KEY
/* PF_KEY key management API */
PyModule_AddIntConstant(m, "AF_KEY", AF_KEY);
#endif
#ifdef AF_NETLINK
/* */
PyModule_AddIntConstant(m, "AF_NETLINK", AF_NETLINK);
PyModule_AddIntConstant(m, "NETLINK_ROUTE", NETLINK_ROUTE);
#ifdef NETLINK_SKIP
PyModule_AddIntConstant(m, "NETLINK_SKIP", NETLINK_SKIP);
#endif
#ifdef NETLINK_W1
PyModule_AddIntConstant(m, "NETLINK_W1", NETLINK_W1);
#endif
PyModule_AddIntConstant(m, "NETLINK_USERSOCK", NETLINK_USERSOCK);
PyModule_AddIntConstant(m, "NETLINK_FIREWALL", NETLINK_FIREWALL);
#ifdef NETLINK_TCPDIAG
PyModule_AddIntConstant(m, "NETLINK_TCPDIAG", NETLINK_TCPDIAG);
#endif
#ifdef NETLINK_NFLOG
PyModule_AddIntConstant(m, "NETLINK_NFLOG", NETLINK_NFLOG);
#endif
#ifdef NETLINK_XFRM
PyModule_AddIntConstant(m, "NETLINK_XFRM", NETLINK_XFRM);
#endif
#ifdef NETLINK_ARPD
PyModule_AddIntConstant(m, "NETLINK_ARPD", NETLINK_ARPD);
#endif
#ifdef NETLINK_ROUTE6
PyModule_AddIntConstant(m, "NETLINK_ROUTE6", NETLINK_ROUTE6);
#endif
PyModule_AddIntConstant(m, "NETLINK_IP6_FW", NETLINK_IP6_FW);
#ifdef NETLINK_DNRTMSG
PyModule_AddIntConstant(m, "NETLINK_DNRTMSG", NETLINK_DNRTMSG);
#endif
#ifdef NETLINK_TAPBASE
PyModule_AddIntConstant(m, "NETLINK_TAPBASE", NETLINK_TAPBASE);
#endif
#endif /* AF_NETLINK */
#ifdef AF_ROUTE
/* Alias to emulate 4.4BSD */
PyModule_AddIntConstant(m, "AF_ROUTE", AF_ROUTE);
#endif
#ifdef AF_ASH
/* Ash */
PyModule_AddIntConstant(m, "AF_ASH", AF_ASH);
#endif
#ifdef AF_ECONET
/* Acorn Econet */
PyModule_AddIntConstant(m, "AF_ECONET", AF_ECONET);
#endif
#ifdef AF_ATMSVC
/* ATM SVCs */
PyModule_AddIntConstant(m, "AF_ATMSVC", AF_ATMSVC);
#endif
#ifdef AF_SNA
/* Linux SNA Project (nutters!) */
PyModule_AddIntConstant(m, "AF_SNA", AF_SNA);
#endif
#ifdef AF_IRDA
/* IRDA sockets */
PyModule_AddIntConstant(m, "AF_IRDA", AF_IRDA);
#endif
#ifdef AF_PPPOX
/* PPPoX sockets */
PyModule_AddIntConstant(m, "AF_PPPOX", AF_PPPOX);
#endif
#ifdef AF_WANPIPE
/* Wanpipe API Sockets */
PyModule_AddIntConstant(m, "AF_WANPIPE", AF_WANPIPE);
#endif
#ifdef AF_LLC
/* Linux LLC */
PyModule_AddIntConstant(m, "AF_LLC", AF_LLC);
#endif
#ifdef USE_BLUETOOTH
PyModule_AddIntConstant(m, "AF_BLUETOOTH", AF_BLUETOOTH);
PyModule_AddIntConstant(m, "BTPROTO_L2CAP", BTPROTO_L2CAP);
PyModule_AddIntConstant(m, "BTPROTO_HCI", BTPROTO_HCI);
PyModule_AddIntConstant(m, "SOL_HCI", SOL_HCI);
#if !defined(__NetBSD__) && !defined(__DragonFly__)
PyModule_AddIntConstant(m, "HCI_FILTER", HCI_FILTER);
#endif
#if !defined(__FreeBSD__)
#if !defined(__NetBSD__) && !defined(__DragonFly__)
PyModule_AddIntConstant(m, "HCI_TIME_STAMP", HCI_TIME_STAMP);
#endif
PyModule_AddIntConstant(m, "HCI_DATA_DIR", HCI_DATA_DIR);
PyModule_AddIntConstant(m, "BTPROTO_SCO", BTPROTO_SCO);
#endif
PyModule_AddIntConstant(m, "BTPROTO_RFCOMM", BTPROTO_RFCOMM);
PyModule_AddStringConstant(m, "BDADDR_ANY", "00:00:00:00:00:00");
PyModule_AddStringConstant(m, "BDADDR_LOCAL", "00:00:00:FF:FF:FF");
#endif
#ifdef AF_CAN
/* Controller Area Network */
PyModule_AddIntConstant(m, "AF_CAN", AF_CAN);
#endif
#ifdef PF_CAN
/* Controller Area Network */
PyModule_AddIntConstant(m, "PF_CAN", PF_CAN);
#endif
/* Reliable Datagram Sockets */
#ifdef AF_RDS
PyModule_AddIntConstant(m, "AF_RDS", AF_RDS);
#endif
#ifdef PF_RDS
PyModule_AddIntConstant(m, "PF_RDS", PF_RDS);
#endif
/* Kernel event messages */
#ifdef PF_SYSTEM
PyModule_AddIntConstant(m, "PF_SYSTEM", PF_SYSTEM);
#endif
#ifdef AF_SYSTEM
PyModule_AddIntConstant(m, "AF_SYSTEM", AF_SYSTEM);
#endif
#ifdef AF_PACKET
PyModule_AddIntMacro(m, AF_PACKET);
#endif
#ifdef PF_PACKET
PyModule_AddIntMacro(m, PF_PACKET);
#endif
#ifdef PACKET_HOST
PyModule_AddIntMacro(m, PACKET_HOST);
#endif
#ifdef PACKET_BROADCAST
PyModule_AddIntMacro(m, PACKET_BROADCAST);
#endif
#ifdef PACKET_MULTICAST
PyModule_AddIntMacro(m, PACKET_MULTICAST);
#endif
#ifdef PACKET_OTHERHOST
PyModule_AddIntMacro(m, PACKET_OTHERHOST);
#endif
#ifdef PACKET_OUTGOING
PyModule_AddIntMacro(m, PACKET_OUTGOING);
#endif
#ifdef PACKET_LOOPBACK
PyModule_AddIntMacro(m, PACKET_LOOPBACK);
#endif
#ifdef PACKET_FASTROUTE
PyModule_AddIntMacro(m, PACKET_FASTROUTE);
#endif
#ifdef HAVE_LINUX_TIPC_H
PyModule_AddIntConstant(m, "AF_TIPC", AF_TIPC);
/* for addresses */
PyModule_AddIntConstant(m, "TIPC_ADDR_NAMESEQ", TIPC_ADDR_NAMESEQ);
PyModule_AddIntConstant(m, "TIPC_ADDR_NAME", TIPC_ADDR_NAME);
PyModule_AddIntConstant(m, "TIPC_ADDR_ID", TIPC_ADDR_ID);
PyModule_AddIntConstant(m, "TIPC_ZONE_SCOPE", TIPC_ZONE_SCOPE);
PyModule_AddIntConstant(m, "TIPC_CLUSTER_SCOPE", TIPC_CLUSTER_SCOPE);
PyModule_AddIntConstant(m, "TIPC_NODE_SCOPE", TIPC_NODE_SCOPE);
/* for setsockopt() */
PyModule_AddIntConstant(m, "SOL_TIPC", SOL_TIPC);
PyModule_AddIntConstant(m, "TIPC_IMPORTANCE", TIPC_IMPORTANCE);
PyModule_AddIntConstant(m, "TIPC_SRC_DROPPABLE", TIPC_SRC_DROPPABLE);
PyModule_AddIntConstant(m, "TIPC_DEST_DROPPABLE",
TIPC_DEST_DROPPABLE);
PyModule_AddIntConstant(m, "TIPC_CONN_TIMEOUT", TIPC_CONN_TIMEOUT);
PyModule_AddIntConstant(m, "TIPC_LOW_IMPORTANCE",
TIPC_LOW_IMPORTANCE);
PyModule_AddIntConstant(m, "TIPC_MEDIUM_IMPORTANCE",
TIPC_MEDIUM_IMPORTANCE);
PyModule_AddIntConstant(m, "TIPC_HIGH_IMPORTANCE",
TIPC_HIGH_IMPORTANCE);
PyModule_AddIntConstant(m, "TIPC_CRITICAL_IMPORTANCE",
TIPC_CRITICAL_IMPORTANCE);
/* for subscriptions */
PyModule_AddIntConstant(m, "TIPC_SUB_PORTS", TIPC_SUB_PORTS);
PyModule_AddIntConstant(m, "TIPC_SUB_SERVICE", TIPC_SUB_SERVICE);
#ifdef TIPC_SUB_CANCEL
/* doesn't seem to be available everywhere */
PyModule_AddIntConstant(m, "TIPC_SUB_CANCEL", TIPC_SUB_CANCEL);
#endif
PyModule_AddIntConstant(m, "TIPC_WAIT_FOREVER", TIPC_WAIT_FOREVER);
PyModule_AddIntConstant(m, "TIPC_PUBLISHED", TIPC_PUBLISHED);
PyModule_AddIntConstant(m, "TIPC_WITHDRAWN", TIPC_WITHDRAWN);
PyModule_AddIntConstant(m, "TIPC_SUBSCR_TIMEOUT", TIPC_SUBSCR_TIMEOUT);
PyModule_AddIntConstant(m, "TIPC_CFG_SRV", TIPC_CFG_SRV);
PyModule_AddIntConstant(m, "TIPC_TOP_SRV", TIPC_TOP_SRV);
#endif
/* Socket types */
PyModule_AddIntConstant(m, "SOCK_STREAM", SOCK_STREAM);
PyModule_AddIntConstant(m, "SOCK_DGRAM", SOCK_DGRAM);
/* We have incomplete socket support. */
PyModule_AddIntConstant(m, "SOCK_RAW", SOCK_RAW);
PyModule_AddIntConstant(m, "SOCK_SEQPACKET", SOCK_SEQPACKET);
#if defined(SOCK_RDM)
PyModule_AddIntConstant(m, "SOCK_RDM", SOCK_RDM);
#endif
#ifdef SOCK_CLOEXEC
PyModule_AddIntConstant(m, "SOCK_CLOEXEC", SOCK_CLOEXEC);
#endif
#ifdef SOCK_NONBLOCK
PyModule_AddIntConstant(m, "SOCK_NONBLOCK", SOCK_NONBLOCK);
#endif
#ifdef SO_DEBUG
PyModule_AddIntConstant(m, "SO_DEBUG", SO_DEBUG);
#endif
#ifdef SO_ACCEPTCONN
PyModule_AddIntConstant(m, "SO_ACCEPTCONN", SO_ACCEPTCONN);
#endif
#ifdef SO_REUSEADDR
PyModule_AddIntConstant(m, "SO_REUSEADDR", SO_REUSEADDR);
#endif
#ifdef SO_EXCLUSIVEADDRUSE
PyModule_AddIntConstant(m, "SO_EXCLUSIVEADDRUSE", SO_EXCLUSIVEADDRUSE);
#endif
#ifdef SO_KEEPALIVE
PyModule_AddIntConstant(m, "SO_KEEPALIVE", SO_KEEPALIVE);
#endif
#ifdef SO_DONTROUTE
PyModule_AddIntConstant(m, "SO_DONTROUTE", SO_DONTROUTE);
#endif
#ifdef SO_BROADCAST
PyModule_AddIntConstant(m, "SO_BROADCAST", SO_BROADCAST);
#endif
#ifdef SO_USELOOPBACK
PyModule_AddIntConstant(m, "SO_USELOOPBACK", SO_USELOOPBACK);
#endif
#ifdef SO_LINGER
PyModule_AddIntConstant(m, "SO_LINGER", SO_LINGER);
#endif
#ifdef SO_OOBINLINE
PyModule_AddIntConstant(m, "SO_OOBINLINE", SO_OOBINLINE);
#endif
#ifdef SO_REUSEPORT
PyModule_AddIntConstant(m, "SO_REUSEPORT", SO_REUSEPORT);
#endif
#ifdef SO_SNDBUF
PyModule_AddIntConstant(m, "SO_SNDBUF", SO_SNDBUF);
#endif
#ifdef SO_RCVBUF
PyModule_AddIntConstant(m, "SO_RCVBUF", SO_RCVBUF);
#endif
#ifdef SO_SNDLOWAT
PyModule_AddIntConstant(m, "SO_SNDLOWAT", SO_SNDLOWAT);
#endif
#ifdef SO_RCVLOWAT
PyModule_AddIntConstant(m, "SO_RCVLOWAT", SO_RCVLOWAT);
#endif
#ifdef SO_SNDTIMEO
PyModule_AddIntConstant(m, "SO_SNDTIMEO", SO_SNDTIMEO);
#endif
#ifdef SO_RCVTIMEO
PyModule_AddIntConstant(m, "SO_RCVTIMEO", SO_RCVTIMEO);
#endif
#ifdef SO_ERROR
PyModule_AddIntConstant(m, "SO_ERROR", SO_ERROR);
#endif
#ifdef SO_TYPE
PyModule_AddIntConstant(m, "SO_TYPE", SO_TYPE);
#endif
#ifdef SO_SETFIB
PyModule_AddIntConstant(m, "SO_SETFIB", SO_SETFIB);
#endif
#ifdef SO_PASSCRED
PyModule_AddIntConstant(m, "SO_PASSCRED", SO_PASSCRED);
#endif
#ifdef SO_PEERCRED
PyModule_AddIntConstant(m, "SO_PEERCRED", SO_PEERCRED);
#endif
#ifdef LOCAL_PEERCRED
PyModule_AddIntConstant(m, "LOCAL_PEERCRED", LOCAL_PEERCRED);
#endif
#ifdef SO_BINDTODEVICE
PyModule_AddIntMacro(m, SO_BINDTODEVICE);
#endif
/* Maximum number of connections for "listen" */
#ifdef SOMAXCONN
PyModule_AddIntConstant(m, "SOMAXCONN", SOMAXCONN);
#else
PyModule_AddIntConstant(m, "SOMAXCONN", 5); /* Common value */
#endif
/* Ancilliary message types */
#ifdef SCM_RIGHTS
PyModule_AddIntConstant(m, "SCM_RIGHTS", SCM_RIGHTS);
#endif
#ifdef SCM_CREDENTIALS
PyModule_AddIntConstant(m, "SCM_CREDENTIALS", SCM_CREDENTIALS);
#endif
#ifdef SCM_CREDS
PyModule_AddIntConstant(m, "SCM_CREDS", SCM_CREDS);
#endif
/* Flags for send, recv */
#ifdef MSG_OOB
PyModule_AddIntConstant(m, "MSG_OOB", MSG_OOB);
#endif
#ifdef MSG_PEEK
PyModule_AddIntConstant(m, "MSG_PEEK", MSG_PEEK);
#endif
#ifdef MSG_DONTROUTE
PyModule_AddIntConstant(m, "MSG_DONTROUTE", MSG_DONTROUTE);
#endif
#ifdef MSG_DONTWAIT
PyModule_AddIntConstant(m, "MSG_DONTWAIT", MSG_DONTWAIT);
#endif
#ifdef MSG_EOR
PyModule_AddIntConstant(m, "MSG_EOR", MSG_EOR);
#endif
#ifdef MSG_TRUNC
PyModule_AddIntConstant(m, "MSG_TRUNC", MSG_TRUNC);
#endif
#ifdef MSG_CTRUNC
PyModule_AddIntConstant(m, "MSG_CTRUNC", MSG_CTRUNC);
#endif
#ifdef MSG_WAITALL
PyModule_AddIntConstant(m, "MSG_WAITALL", MSG_WAITALL);
#endif
#ifdef MSG_BTAG
PyModule_AddIntConstant(m, "MSG_BTAG", MSG_BTAG);
#endif
#ifdef MSG_ETAG
PyModule_AddIntConstant(m, "MSG_ETAG", MSG_ETAG);
#endif
#ifdef MSG_NOSIGNAL
PyModule_AddIntConstant(m, "MSG_NOSIGNAL", MSG_NOSIGNAL);
#endif
#ifdef MSG_NOTIFICATION
PyModule_AddIntConstant(m, "MSG_NOTIFICATION", MSG_NOTIFICATION);
#endif
#ifdef MSG_CMSG_CLOEXEC
PyModule_AddIntConstant(m, "MSG_CMSG_CLOEXEC", MSG_CMSG_CLOEXEC);
#endif
#ifdef MSG_ERRQUEUE
PyModule_AddIntConstant(m, "MSG_ERRQUEUE", MSG_ERRQUEUE);
#endif
#ifdef MSG_CONFIRM
PyModule_AddIntConstant(m, "MSG_CONFIRM", MSG_CONFIRM);
#endif
#ifdef MSG_MORE
PyModule_AddIntConstant(m, "MSG_MORE", MSG_MORE);
#endif
#ifdef MSG_EOF
PyModule_AddIntConstant(m, "MSG_EOF", MSG_EOF);
#endif
#ifdef MSG_BCAST
PyModule_AddIntConstant(m, "MSG_BCAST", MSG_BCAST);
#endif
#ifdef MSG_MCAST
PyModule_AddIntConstant(m, "MSG_MCAST", MSG_MCAST);
#endif
/* Protocol level and numbers, usable for [gs]etsockopt */
#ifdef SOL_SOCKET
PyModule_AddIntConstant(m, "SOL_SOCKET", SOL_SOCKET);
#endif
#ifdef SOL_IP
PyModule_AddIntConstant(m, "SOL_IP", SOL_IP);
#else
PyModule_AddIntConstant(m, "SOL_IP", 0);
#endif
#ifdef SOL_IPX
PyModule_AddIntConstant(m, "SOL_IPX", SOL_IPX);
#endif
#ifdef SOL_AX25
PyModule_AddIntConstant(m, "SOL_AX25", SOL_AX25);
#endif
#ifdef SOL_ATALK
PyModule_AddIntConstant(m, "SOL_ATALK", SOL_ATALK);
#endif
#ifdef SOL_NETROM
PyModule_AddIntConstant(m, "SOL_NETROM", SOL_NETROM);
#endif
#ifdef SOL_ROSE
PyModule_AddIntConstant(m, "SOL_ROSE", SOL_ROSE);
#endif
#ifdef SOL_TCP
PyModule_AddIntConstant(m, "SOL_TCP", SOL_TCP);
#else
PyModule_AddIntConstant(m, "SOL_TCP", 6);
#endif
#ifdef SOL_UDP
PyModule_AddIntConstant(m, "SOL_UDP", SOL_UDP);
#else
PyModule_AddIntConstant(m, "SOL_UDP", 17);
#endif
#ifdef SOL_CAN_BASE
PyModule_AddIntConstant(m, "SOL_CAN_BASE", SOL_CAN_BASE);
#endif
#ifdef SOL_CAN_RAW
PyModule_AddIntConstant(m, "SOL_CAN_RAW", SOL_CAN_RAW);
PyModule_AddIntConstant(m, "CAN_RAW", CAN_RAW);
#endif
#ifdef HAVE_LINUX_CAN_H
PyModule_AddIntConstant(m, "CAN_EFF_FLAG", CAN_EFF_FLAG);
PyModule_AddIntConstant(m, "CAN_RTR_FLAG", CAN_RTR_FLAG);
PyModule_AddIntConstant(m, "CAN_ERR_FLAG", CAN_ERR_FLAG);
PyModule_AddIntConstant(m, "CAN_SFF_MASK", CAN_SFF_MASK);
PyModule_AddIntConstant(m, "CAN_EFF_MASK", CAN_EFF_MASK);
PyModule_AddIntConstant(m, "CAN_ERR_MASK", CAN_ERR_MASK);
#endif
#ifdef HAVE_LINUX_CAN_RAW_H
PyModule_AddIntConstant(m, "CAN_RAW_FILTER", CAN_RAW_FILTER);
PyModule_AddIntConstant(m, "CAN_RAW_ERR_FILTER", CAN_RAW_ERR_FILTER);
PyModule_AddIntConstant(m, "CAN_RAW_LOOPBACK", CAN_RAW_LOOPBACK);
PyModule_AddIntConstant(m, "CAN_RAW_RECV_OWN_MSGS", CAN_RAW_RECV_OWN_MSGS);
#endif
#ifdef SOL_RDS
PyModule_AddIntConstant(m, "SOL_RDS", SOL_RDS);
#endif
#ifdef RDS_CANCEL_SENT_TO
PyModule_AddIntConstant(m, "RDS_CANCEL_SENT_TO", RDS_CANCEL_SENT_TO);
#endif
#ifdef RDS_GET_MR
PyModule_AddIntConstant(m, "RDS_GET_MR", RDS_GET_MR);
#endif
#ifdef RDS_FREE_MR
PyModule_AddIntConstant(m, "RDS_FREE_MR", RDS_FREE_MR);
#endif
#ifdef RDS_RECVERR
PyModule_AddIntConstant(m, "RDS_RECVERR", RDS_RECVERR);
#endif
#ifdef RDS_CONG_MONITOR
PyModule_AddIntConstant(m, "RDS_CONG_MONITOR", RDS_CONG_MONITOR);
#endif
#ifdef RDS_GET_MR_FOR_DEST
PyModule_AddIntConstant(m, "RDS_GET_MR_FOR_DEST", RDS_GET_MR_FOR_DEST);
#endif
#ifdef IPPROTO_IP
PyModule_AddIntConstant(m, "IPPROTO_IP", IPPROTO_IP);
#else
PyModule_AddIntConstant(m, "IPPROTO_IP", 0);
#endif
#ifdef IPPROTO_HOPOPTS
PyModule_AddIntConstant(m, "IPPROTO_HOPOPTS", IPPROTO_HOPOPTS);
#endif
#ifdef IPPROTO_ICMP
PyModule_AddIntConstant(m, "IPPROTO_ICMP", IPPROTO_ICMP);
#else
PyModule_AddIntConstant(m, "IPPROTO_ICMP", 1);
#endif
#ifdef IPPROTO_IGMP
PyModule_AddIntConstant(m, "IPPROTO_IGMP", IPPROTO_IGMP);
#endif
#ifdef IPPROTO_GGP
PyModule_AddIntConstant(m, "IPPROTO_GGP", IPPROTO_GGP);
#endif
#ifdef IPPROTO_IPV4
PyModule_AddIntConstant(m, "IPPROTO_IPV4", IPPROTO_IPV4);
#endif
#ifdef IPPROTO_IPV6
PyModule_AddIntConstant(m, "IPPROTO_IPV6", IPPROTO_IPV6);
#endif
#ifdef IPPROTO_IPIP
PyModule_AddIntConstant(m, "IPPROTO_IPIP", IPPROTO_IPIP);
#endif
#ifdef IPPROTO_TCP
PyModule_AddIntConstant(m, "IPPROTO_TCP", IPPROTO_TCP);
#else
PyModule_AddIntConstant(m, "IPPROTO_TCP", 6);
#endif
#ifdef IPPROTO_EGP
PyModule_AddIntConstant(m, "IPPROTO_EGP", IPPROTO_EGP);
#endif
#ifdef IPPROTO_PUP
PyModule_AddIntConstant(m, "IPPROTO_PUP", IPPROTO_PUP);
#endif
#ifdef IPPROTO_UDP
PyModule_AddIntConstant(m, "IPPROTO_UDP", IPPROTO_UDP);
#else
PyModule_AddIntConstant(m, "IPPROTO_UDP", 17);
#endif
#ifdef IPPROTO_IDP
PyModule_AddIntConstant(m, "IPPROTO_IDP", IPPROTO_IDP);
#endif
#ifdef IPPROTO_HELLO
PyModule_AddIntConstant(m, "IPPROTO_HELLO", IPPROTO_HELLO);
#endif
#ifdef IPPROTO_ND
PyModule_AddIntConstant(m, "IPPROTO_ND", IPPROTO_ND);
#endif
#ifdef IPPROTO_TP
PyModule_AddIntConstant(m, "IPPROTO_TP", IPPROTO_TP);
#endif
#ifdef IPPROTO_IPV6
PyModule_AddIntConstant(m, "IPPROTO_IPV6", IPPROTO_IPV6);
#endif
#ifdef IPPROTO_ROUTING
PyModule_AddIntConstant(m, "IPPROTO_ROUTING", IPPROTO_ROUTING);
#endif
#ifdef IPPROTO_FRAGMENT
PyModule_AddIntConstant(m, "IPPROTO_FRAGMENT", IPPROTO_FRAGMENT);
#endif
#ifdef IPPROTO_RSVP
PyModule_AddIntConstant(m, "IPPROTO_RSVP", IPPROTO_RSVP);
#endif
#ifdef IPPROTO_GRE
PyModule_AddIntConstant(m, "IPPROTO_GRE", IPPROTO_GRE);
#endif
#ifdef IPPROTO_ESP
PyModule_AddIntConstant(m, "IPPROTO_ESP", IPPROTO_ESP);
#endif
#ifdef IPPROTO_AH
PyModule_AddIntConstant(m, "IPPROTO_AH", IPPROTO_AH);
#endif
#ifdef IPPROTO_MOBILE
PyModule_AddIntConstant(m, "IPPROTO_MOBILE", IPPROTO_MOBILE);
#endif
#ifdef IPPROTO_ICMPV6
PyModule_AddIntConstant(m, "IPPROTO_ICMPV6", IPPROTO_ICMPV6);
#endif
#ifdef IPPROTO_NONE
PyModule_AddIntConstant(m, "IPPROTO_NONE", IPPROTO_NONE);
#endif
#ifdef IPPROTO_DSTOPTS
PyModule_AddIntConstant(m, "IPPROTO_DSTOPTS", IPPROTO_DSTOPTS);
#endif
#ifdef IPPROTO_XTP
PyModule_AddIntConstant(m, "IPPROTO_XTP", IPPROTO_XTP);
#endif
#ifdef IPPROTO_EON
PyModule_AddIntConstant(m, "IPPROTO_EON", IPPROTO_EON);
#endif
#ifdef IPPROTO_PIM
PyModule_AddIntConstant(m, "IPPROTO_PIM", IPPROTO_PIM);
#endif
#ifdef IPPROTO_IPCOMP
PyModule_AddIntConstant(m, "IPPROTO_IPCOMP", IPPROTO_IPCOMP);
#endif
#ifdef IPPROTO_VRRP
PyModule_AddIntConstant(m, "IPPROTO_VRRP", IPPROTO_VRRP);
#endif
#ifdef IPPROTO_SCTP
PyModule_AddIntConstant(m, "IPPROTO_SCTP", IPPROTO_SCTP);
#endif
#ifdef IPPROTO_BIP
PyModule_AddIntConstant(m, "IPPROTO_BIP", IPPROTO_BIP);
#endif
/**/
#ifdef IPPROTO_RAW
PyModule_AddIntConstant(m, "IPPROTO_RAW", IPPROTO_RAW);
#else
PyModule_AddIntConstant(m, "IPPROTO_RAW", 255);
#endif
#ifdef IPPROTO_MAX
PyModule_AddIntConstant(m, "IPPROTO_MAX", IPPROTO_MAX);
#endif
#ifdef SYSPROTO_CONTROL
PyModule_AddIntConstant(m, "SYSPROTO_CONTROL", SYSPROTO_CONTROL);
#endif
/* Some port configuration */
#ifdef IPPORT_RESERVED
PyModule_AddIntConstant(m, "IPPORT_RESERVED", IPPORT_RESERVED);
#else
PyModule_AddIntConstant(m, "IPPORT_RESERVED", 1024);
#endif
#ifdef IPPORT_USERRESERVED
PyModule_AddIntConstant(m, "IPPORT_USERRESERVED", IPPORT_USERRESERVED);
#else
PyModule_AddIntConstant(m, "IPPORT_USERRESERVED", 5000);
#endif
/* Some reserved IP v.4 addresses */
#ifdef INADDR_ANY
PyModule_AddIntConstant(m, "INADDR_ANY", INADDR_ANY);
#else
PyModule_AddIntConstant(m, "INADDR_ANY", 0x00000000);
#endif
#ifdef INADDR_BROADCAST
PyModule_AddIntConstant(m, "INADDR_BROADCAST", INADDR_BROADCAST);
#else
PyModule_AddIntConstant(m, "INADDR_BROADCAST", 0xffffffff);
#endif
#ifdef INADDR_LOOPBACK
PyModule_AddIntConstant(m, "INADDR_LOOPBACK", INADDR_LOOPBACK);
#else
PyModule_AddIntConstant(m, "INADDR_LOOPBACK", 0x7F000001);
#endif
#ifdef INADDR_UNSPEC_GROUP
PyModule_AddIntConstant(m, "INADDR_UNSPEC_GROUP", INADDR_UNSPEC_GROUP);
#else
PyModule_AddIntConstant(m, "INADDR_UNSPEC_GROUP", 0xe0000000);
#endif
#ifdef INADDR_ALLHOSTS_GROUP
PyModule_AddIntConstant(m, "INADDR_ALLHOSTS_GROUP",
INADDR_ALLHOSTS_GROUP);
#else
PyModule_AddIntConstant(m, "INADDR_ALLHOSTS_GROUP", 0xe0000001);
#endif
#ifdef INADDR_MAX_LOCAL_GROUP
PyModule_AddIntConstant(m, "INADDR_MAX_LOCAL_GROUP",
INADDR_MAX_LOCAL_GROUP);
#else
PyModule_AddIntConstant(m, "INADDR_MAX_LOCAL_GROUP", 0xe00000ff);
#endif
#ifdef INADDR_NONE
PyModule_AddIntConstant(m, "INADDR_NONE", INADDR_NONE);
#else
PyModule_AddIntConstant(m, "INADDR_NONE", 0xffffffff);
#endif
/* IPv4 [gs]etsockopt options */
#ifdef IP_OPTIONS
PyModule_AddIntConstant(m, "IP_OPTIONS", IP_OPTIONS);
#endif
#ifdef IP_HDRINCL
PyModule_AddIntConstant(m, "IP_HDRINCL", IP_HDRINCL);
#endif
#ifdef IP_TOS
PyModule_AddIntConstant(m, "IP_TOS", IP_TOS);
#endif
#ifdef IP_TTL
PyModule_AddIntConstant(m, "IP_TTL", IP_TTL);
#endif
#ifdef IP_RECVOPTS
PyModule_AddIntConstant(m, "IP_RECVOPTS", IP_RECVOPTS);
#endif
#ifdef IP_RECVRETOPTS
PyModule_AddIntConstant(m, "IP_RECVRETOPTS", IP_RECVRETOPTS);
#endif
#ifdef IP_RECVDSTADDR
PyModule_AddIntConstant(m, "IP_RECVDSTADDR", IP_RECVDSTADDR);
#endif
#ifdef IP_RETOPTS
PyModule_AddIntConstant(m, "IP_RETOPTS", IP_RETOPTS);
#endif
#ifdef IP_MULTICAST_IF
PyModule_AddIntConstant(m, "IP_MULTICAST_IF", IP_MULTICAST_IF);
#endif
#ifdef IP_MULTICAST_TTL
PyModule_AddIntConstant(m, "IP_MULTICAST_TTL", IP_MULTICAST_TTL);
#endif
#ifdef IP_MULTICAST_LOOP
PyModule_AddIntConstant(m, "IP_MULTICAST_LOOP", IP_MULTICAST_LOOP);
#endif
#ifdef IP_ADD_MEMBERSHIP
PyModule_AddIntConstant(m, "IP_ADD_MEMBERSHIP", IP_ADD_MEMBERSHIP);
#endif
#ifdef IP_DROP_MEMBERSHIP
PyModule_AddIntConstant(m, "IP_DROP_MEMBERSHIP", IP_DROP_MEMBERSHIP);
#endif
#ifdef IP_DEFAULT_MULTICAST_TTL
PyModule_AddIntConstant(m, "IP_DEFAULT_MULTICAST_TTL",
IP_DEFAULT_MULTICAST_TTL);
#endif
#ifdef IP_DEFAULT_MULTICAST_LOOP
PyModule_AddIntConstant(m, "IP_DEFAULT_MULTICAST_LOOP",
IP_DEFAULT_MULTICAST_LOOP);
#endif
#ifdef IP_MAX_MEMBERSHIPS
PyModule_AddIntConstant(m, "IP_MAX_MEMBERSHIPS", IP_MAX_MEMBERSHIPS);
#endif
#ifdef IP_TRANSPARENT
PyModule_AddIntConstant(m, "IP_TRANSPARENT", IP_TRANSPARENT);
#endif
/* IPv6 [gs]etsockopt options, defined in RFC2553 */
#ifdef IPV6_JOIN_GROUP
PyModule_AddIntConstant(m, "IPV6_JOIN_GROUP", IPV6_JOIN_GROUP);
#endif
#ifdef IPV6_LEAVE_GROUP
PyModule_AddIntConstant(m, "IPV6_LEAVE_GROUP", IPV6_LEAVE_GROUP);
#endif
#ifdef IPV6_MULTICAST_HOPS
PyModule_AddIntConstant(m, "IPV6_MULTICAST_HOPS", IPV6_MULTICAST_HOPS);
#endif
#ifdef IPV6_MULTICAST_IF
PyModule_AddIntConstant(m, "IPV6_MULTICAST_IF", IPV6_MULTICAST_IF);
#endif
#ifdef IPV6_MULTICAST_LOOP
PyModule_AddIntConstant(m, "IPV6_MULTICAST_LOOP", IPV6_MULTICAST_LOOP);
#endif
#ifdef IPV6_UNICAST_HOPS
PyModule_AddIntConstant(m, "IPV6_UNICAST_HOPS", IPV6_UNICAST_HOPS);
#endif
/* Additional IPV6 socket options, defined in RFC 3493 */
#ifdef IPV6_V6ONLY
PyModule_AddIntConstant(m, "IPV6_V6ONLY", IPV6_V6ONLY);
#endif
/* Advanced IPV6 socket options, from RFC 3542 */
#ifdef IPV6_CHECKSUM
PyModule_AddIntConstant(m, "IPV6_CHECKSUM", IPV6_CHECKSUM);
#endif
#ifdef IPV6_DONTFRAG
PyModule_AddIntConstant(m, "IPV6_DONTFRAG", IPV6_DONTFRAG);
#endif
#ifdef IPV6_DSTOPTS
PyModule_AddIntConstant(m, "IPV6_DSTOPTS", IPV6_DSTOPTS);
#endif
#ifdef IPV6_HOPLIMIT
PyModule_AddIntConstant(m, "IPV6_HOPLIMIT", IPV6_HOPLIMIT);
#endif
#ifdef IPV6_HOPOPTS
PyModule_AddIntConstant(m, "IPV6_HOPOPTS", IPV6_HOPOPTS);
#endif
#ifdef IPV6_NEXTHOP
PyModule_AddIntConstant(m, "IPV6_NEXTHOP", IPV6_NEXTHOP);
#endif
#ifdef IPV6_PATHMTU
PyModule_AddIntConstant(m, "IPV6_PATHMTU", IPV6_PATHMTU);
#endif
#ifdef IPV6_PKTINFO
PyModule_AddIntConstant(m, "IPV6_PKTINFO", IPV6_PKTINFO);
#endif
#ifdef IPV6_RECVDSTOPTS
PyModule_AddIntConstant(m, "IPV6_RECVDSTOPTS", IPV6_RECVDSTOPTS);
#endif
#ifdef IPV6_RECVHOPLIMIT
PyModule_AddIntConstant(m, "IPV6_RECVHOPLIMIT", IPV6_RECVHOPLIMIT);
#endif
#ifdef IPV6_RECVHOPOPTS
PyModule_AddIntConstant(m, "IPV6_RECVHOPOPTS", IPV6_RECVHOPOPTS);
#endif
#ifdef IPV6_RECVPKTINFO
PyModule_AddIntConstant(m, "IPV6_RECVPKTINFO", IPV6_RECVPKTINFO);
#endif
#ifdef IPV6_RECVRTHDR
PyModule_AddIntConstant(m, "IPV6_RECVRTHDR", IPV6_RECVRTHDR);
#endif
#ifdef IPV6_RECVTCLASS
PyModule_AddIntConstant(m, "IPV6_RECVTCLASS", IPV6_RECVTCLASS);
#endif
#ifdef IPV6_RTHDR
PyModule_AddIntConstant(m, "IPV6_RTHDR", IPV6_RTHDR);
#endif
#ifdef IPV6_RTHDRDSTOPTS
PyModule_AddIntConstant(m, "IPV6_RTHDRDSTOPTS", IPV6_RTHDRDSTOPTS);
#endif
#ifdef IPV6_RTHDR_TYPE_0
PyModule_AddIntConstant(m, "IPV6_RTHDR_TYPE_0", IPV6_RTHDR_TYPE_0);
#endif
#ifdef IPV6_RECVPATHMTU
PyModule_AddIntConstant(m, "IPV6_RECVPATHMTU", IPV6_RECVPATHMTU);
#endif
#ifdef IPV6_TCLASS
PyModule_AddIntConstant(m, "IPV6_TCLASS", IPV6_TCLASS);
#endif
#ifdef IPV6_USE_MIN_MTU
PyModule_AddIntConstant(m, "IPV6_USE_MIN_MTU", IPV6_USE_MIN_MTU);
#endif
/* TCP options */
#ifdef TCP_NODELAY
PyModule_AddIntConstant(m, "TCP_NODELAY", TCP_NODELAY);
#endif
#ifdef TCP_MAXSEG
PyModule_AddIntConstant(m, "TCP_MAXSEG", TCP_MAXSEG);
#endif
#ifdef TCP_CORK
PyModule_AddIntConstant(m, "TCP_CORK", TCP_CORK);
#endif
#ifdef TCP_KEEPIDLE
PyModule_AddIntConstant(m, "TCP_KEEPIDLE", TCP_KEEPIDLE);
#endif
#ifdef TCP_KEEPINTVL
PyModule_AddIntConstant(m, "TCP_KEEPINTVL", TCP_KEEPINTVL);
#endif
#ifdef TCP_KEEPCNT
PyModule_AddIntConstant(m, "TCP_KEEPCNT", TCP_KEEPCNT);
#endif
#ifdef TCP_SYNCNT
PyModule_AddIntConstant(m, "TCP_SYNCNT", TCP_SYNCNT);
#endif
#ifdef TCP_LINGER2
PyModule_AddIntConstant(m, "TCP_LINGER2", TCP_LINGER2);
#endif
#ifdef TCP_DEFER_ACCEPT
PyModule_AddIntConstant(m, "TCP_DEFER_ACCEPT", TCP_DEFER_ACCEPT);
#endif
#ifdef TCP_WINDOW_CLAMP
PyModule_AddIntConstant(m, "TCP_WINDOW_CLAMP", TCP_WINDOW_CLAMP);
#endif
#ifdef TCP_INFO
PyModule_AddIntConstant(m, "TCP_INFO", TCP_INFO);
#endif
#ifdef TCP_QUICKACK
PyModule_AddIntConstant(m, "TCP_QUICKACK", TCP_QUICKACK);
#endif
/* IPX options */
#ifdef IPX_TYPE
PyModule_AddIntConstant(m, "IPX_TYPE", IPX_TYPE);
#endif
/* Reliable Datagram Sockets */
#ifdef RDS_CMSG_RDMA_ARGS
PyModule_AddIntConstant(m, "RDS_CMSG_RDMA_ARGS", RDS_CMSG_RDMA_ARGS);
#endif
#ifdef RDS_CMSG_RDMA_DEST
PyModule_AddIntConstant(m, "RDS_CMSG_RDMA_DEST", RDS_CMSG_RDMA_DEST);
#endif
#ifdef RDS_CMSG_RDMA_MAP
PyModule_AddIntConstant(m, "RDS_CMSG_RDMA_MAP", RDS_CMSG_RDMA_MAP);
#endif
#ifdef RDS_CMSG_RDMA_STATUS
PyModule_AddIntConstant(m, "RDS_CMSG_RDMA_STATUS", RDS_CMSG_RDMA_STATUS);
#endif
#ifdef RDS_CMSG_RDMA_UPDATE
PyModule_AddIntConstant(m, "RDS_CMSG_RDMA_UPDATE", RDS_CMSG_RDMA_UPDATE);
#endif
#ifdef RDS_RDMA_READWRITE
PyModule_AddIntConstant(m, "RDS_RDMA_READWRITE", RDS_RDMA_READWRITE);
#endif
#ifdef RDS_RDMA_FENCE
PyModule_AddIntConstant(m, "RDS_RDMA_FENCE", RDS_RDMA_FENCE);
#endif
#ifdef RDS_RDMA_INVALIDATE
PyModule_AddIntConstant(m, "RDS_RDMA_INVALIDATE", RDS_RDMA_INVALIDATE);
#endif
#ifdef RDS_RDMA_USE_ONCE
PyModule_AddIntConstant(m, "RDS_RDMA_USE_ONCE", RDS_RDMA_USE_ONCE);
#endif
#ifdef RDS_RDMA_DONTWAIT
PyModule_AddIntConstant(m, "RDS_RDMA_DONTWAIT", RDS_RDMA_DONTWAIT);
#endif
#ifdef RDS_RDMA_NOTIFY_ME
PyModule_AddIntConstant(m, "RDS_RDMA_NOTIFY_ME", RDS_RDMA_NOTIFY_ME);
#endif
#ifdef RDS_RDMA_SILENT
PyModule_AddIntConstant(m, "RDS_RDMA_SILENT", RDS_RDMA_SILENT);
#endif
/* get{addr,name}info parameters */
#ifdef EAI_ADDRFAMILY
PyModule_AddIntConstant(m, "EAI_ADDRFAMILY", EAI_ADDRFAMILY);
#endif
#ifdef EAI_AGAIN
PyModule_AddIntConstant(m, "EAI_AGAIN", EAI_AGAIN);
#endif
#ifdef EAI_BADFLAGS
PyModule_AddIntConstant(m, "EAI_BADFLAGS", EAI_BADFLAGS);
#endif
#ifdef EAI_FAIL
PyModule_AddIntConstant(m, "EAI_FAIL", EAI_FAIL);
#endif
#ifdef EAI_FAMILY
PyModule_AddIntConstant(m, "EAI_FAMILY", EAI_FAMILY);
#endif
#ifdef EAI_MEMORY
PyModule_AddIntConstant(m, "EAI_MEMORY", EAI_MEMORY);
#endif
#ifdef EAI_NODATA
PyModule_AddIntConstant(m, "EAI_NODATA", EAI_NODATA);
#endif
#ifdef EAI_NONAME
PyModule_AddIntConstant(m, "EAI_NONAME", EAI_NONAME);
#endif
#ifdef EAI_OVERFLOW
PyModule_AddIntConstant(m, "EAI_OVERFLOW", EAI_OVERFLOW);
#endif
#ifdef EAI_SERVICE
PyModule_AddIntConstant(m, "EAI_SERVICE", EAI_SERVICE);
#endif
#ifdef EAI_SOCKTYPE
PyModule_AddIntConstant(m, "EAI_SOCKTYPE", EAI_SOCKTYPE);
#endif
#ifdef EAI_SYSTEM
PyModule_AddIntConstant(m, "EAI_SYSTEM", EAI_SYSTEM);
#endif
#ifdef EAI_BADHINTS
PyModule_AddIntConstant(m, "EAI_BADHINTS", EAI_BADHINTS);
#endif
#ifdef EAI_PROTOCOL
PyModule_AddIntConstant(m, "EAI_PROTOCOL", EAI_PROTOCOL);
#endif
#ifdef EAI_MAX
PyModule_AddIntConstant(m, "EAI_MAX", EAI_MAX);
#endif
#ifdef AI_PASSIVE
PyModule_AddIntConstant(m, "AI_PASSIVE", AI_PASSIVE);
#endif
#ifdef AI_CANONNAME
PyModule_AddIntConstant(m, "AI_CANONNAME", AI_CANONNAME);
#endif
#ifdef AI_NUMERICHOST
PyModule_AddIntConstant(m, "AI_NUMERICHOST", AI_NUMERICHOST);
#endif
#ifdef AI_NUMERICSERV
PyModule_AddIntConstant(m, "AI_NUMERICSERV", AI_NUMERICSERV);
#endif
#ifdef AI_MASK
PyModule_AddIntConstant(m, "AI_MASK", AI_MASK);
#endif
#ifdef AI_ALL
PyModule_AddIntConstant(m, "AI_ALL", AI_ALL);
#endif
#ifdef AI_V4MAPPED_CFG
PyModule_AddIntConstant(m, "AI_V4MAPPED_CFG", AI_V4MAPPED_CFG);
#endif
#ifdef AI_ADDRCONFIG
PyModule_AddIntConstant(m, "AI_ADDRCONFIG", AI_ADDRCONFIG);
#endif
#ifdef AI_V4MAPPED
PyModule_AddIntConstant(m, "AI_V4MAPPED", AI_V4MAPPED);
#endif
#ifdef AI_DEFAULT
PyModule_AddIntConstant(m, "AI_DEFAULT", AI_DEFAULT);
#endif
#ifdef NI_MAXHOST
PyModule_AddIntConstant(m, "NI_MAXHOST", NI_MAXHOST);
#endif
#ifdef NI_MAXSERV
PyModule_AddIntConstant(m, "NI_MAXSERV", NI_MAXSERV);
#endif
#ifdef NI_NOFQDN
PyModule_AddIntConstant(m, "NI_NOFQDN", NI_NOFQDN);
#endif
#ifdef NI_NUMERICHOST
PyModule_AddIntConstant(m, "NI_NUMERICHOST", NI_NUMERICHOST);
#endif
#ifdef NI_NAMEREQD
PyModule_AddIntConstant(m, "NI_NAMEREQD", NI_NAMEREQD);
#endif
#ifdef NI_NUMERICSERV
PyModule_AddIntConstant(m, "NI_NUMERICSERV", NI_NUMERICSERV);
#endif
#ifdef NI_DGRAM
PyModule_AddIntConstant(m, "NI_DGRAM", NI_DGRAM);
#endif
/* shutdown() parameters */
#ifdef SHUT_RD
PyModule_AddIntConstant(m, "SHUT_RD", SHUT_RD);
#elif defined(SD_RECEIVE)
PyModule_AddIntConstant(m, "SHUT_RD", SD_RECEIVE);
#else
PyModule_AddIntConstant(m, "SHUT_RD", 0);
#endif
#ifdef SHUT_WR
PyModule_AddIntConstant(m, "SHUT_WR", SHUT_WR);
#elif defined(SD_SEND)
PyModule_AddIntConstant(m, "SHUT_WR", SD_SEND);
#else
PyModule_AddIntConstant(m, "SHUT_WR", 1);
#endif
#ifdef SHUT_RDWR
PyModule_AddIntConstant(m, "SHUT_RDWR", SHUT_RDWR);
#elif defined(SD_BOTH)
PyModule_AddIntConstant(m, "SHUT_RDWR", SD_BOTH);
#else
PyModule_AddIntConstant(m, "SHUT_RDWR", 2);
#endif
#ifdef SIO_RCVALL
{
DWORD codes[] = {SIO_RCVALL, SIO_KEEPALIVE_VALS};
const char *names[] = {"SIO_RCVALL", "SIO_KEEPALIVE_VALS"};
int i;
for(i = 0; i<Py_ARRAY_LENGTH(codes); ++i) {
PyObject *tmp;
tmp = PyLong_FromUnsignedLong(codes[i]);
if (tmp == NULL)
return NULL;
PyModule_AddObject(m, names[i], tmp);
}
}
PyModule_AddIntConstant(m, "RCVALL_OFF", RCVALL_OFF);
PyModule_AddIntConstant(m, "RCVALL_ON", RCVALL_ON);
PyModule_AddIntConstant(m, "RCVALL_SOCKETLEVELONLY", RCVALL_SOCKETLEVELONLY);
#ifdef RCVALL_IPLEVEL
PyModule_AddIntConstant(m, "RCVALL_IPLEVEL", RCVALL_IPLEVEL);
#endif
#ifdef RCVALL_MAX
PyModule_AddIntConstant(m, "RCVALL_MAX", RCVALL_MAX);
#endif
#endif /* _MSTCPIP_ */
/* Initialize gethostbyname lock */
#if defined(USE_GETHOSTBYNAME_LOCK) || defined(USE_GETADDRINFO_LOCK)
netdb_lock = PyThread_allocate_lock();
#endif
return m;
}
#ifndef HAVE_INET_PTON
#if !defined(NTDDI_VERSION) || (NTDDI_VERSION < NTDDI_LONGHORN)
/* Simplistic emulation code for inet_pton that only works for IPv4 */
/* These are not exposed because they do not set errno properly */
int
inet_pton(int af, const char *src, void *dst)
{
if (af == AF_INET) {
#if (SIZEOF_INT != 4)
#error "Not sure if in_addr_t exists and int is not 32-bits."
#endif
unsigned int packed_addr;
packed_addr = inet_addr(src);
if (packed_addr == INADDR_NONE)
return 0;
memcpy(dst, &packed_addr, 4);
return 1;
}
/* Should set errno to EAFNOSUPPORT */
return -1;
}
const char *
inet_ntop(int af, const void *src, char *dst, socklen_t size)
{
if (af == AF_INET) {
struct in_addr packed_addr;
if (size < 16)
/* Should set errno to ENOSPC. */
return NULL;
memcpy(&packed_addr, src, sizeof(packed_addr));
return strncpy(dst, inet_ntoa(packed_addr), size);
}
/* Should set errno to EAFNOSUPPORT */
return NULL;
}
#endif
#endif