| """RFC 2822 message manipulation. |
| |
| Note: This is only a very rough sketch of a full RFC-822 parser; in particular |
| the tokenizing of addresses does not adhere to all the quoting rules. |
| |
| Note: RFC 2822 is a long awaited update to RFC 822. This module should |
| conform to RFC 2822, and is thus mis-named (it's not worth renaming it). Some |
| effort at RFC 2822 updates have been made, but a thorough audit has not been |
| performed. Consider any RFC 2822 non-conformance to be a bug. |
| |
| RFC 2822: http://www.faqs.org/rfcs/rfc2822.html |
| RFC 822 : http://www.faqs.org/rfcs/rfc822.html (obsolete) |
| |
| Directions for use: |
| |
| To create a Message object: first open a file, e.g.: |
| |
| fp = open(file, 'r') |
| |
| You can use any other legal way of getting an open file object, e.g. use |
| sys.stdin or call os.popen(). Then pass the open file object to the Message() |
| constructor: |
| |
| m = Message(fp) |
| |
| This class can work with any input object that supports a readline method. If |
| the input object has seek and tell capability, the rewindbody method will |
| work; also illegal lines will be pushed back onto the input stream. If the |
| input object lacks seek but has an `unread' method that can push back a line |
| of input, Message will use that to push back illegal lines. Thus this class |
| can be used to parse messages coming from a buffered stream. |
| |
| The optional `seekable' argument is provided as a workaround for certain stdio |
| libraries in which tell() discards buffered data before discovering that the |
| lseek() system call doesn't work. For maximum portability, you should set the |
| seekable argument to zero to prevent that initial \code{tell} when passing in |
| an unseekable object such as a a file object created from a socket object. If |
| it is 1 on entry -- which it is by default -- the tell() method of the open |
| file object is called once; if this raises an exception, seekable is reset to |
| 0. For other nonzero values of seekable, this test is not made. |
| |
| To get the text of a particular header there are several methods: |
| |
| str = m.getheader(name) |
| str = m.getrawheader(name) |
| |
| where name is the name of the header, e.g. 'Subject'. The difference is that |
| getheader() strips the leading and trailing whitespace, while getrawheader() |
| doesn't. Both functions retain embedded whitespace (including newlines) |
| exactly as they are specified in the header, and leave the case of the text |
| unchanged. |
| |
| For addresses and address lists there are functions |
| |
| realname, mailaddress = m.getaddr(name) |
| list = m.getaddrlist(name) |
| |
| where the latter returns a list of (realname, mailaddr) tuples. |
| |
| There is also a method |
| |
| time = m.getdate(name) |
| |
| which parses a Date-like field and returns a time-compatible tuple, |
| i.e. a tuple such as returned by time.localtime() or accepted by |
| time.mktime(). |
| |
| See the class definition for lower level access methods. |
| |
| There are also some utility functions here. |
| """ |
| # Cleanup and extensions by Eric S. Raymond <esr@thyrsus.com> |
| |
| import time |
| |
| __all__ = ["Message","AddressList","parsedate","parsedate_tz","mktime_tz"] |
| |
| _blanklines = ('\r\n', '\n') # Optimization for islast() |
| |
| |
| class Message: |
| """Represents a single RFC 2822-compliant message.""" |
| |
| def __init__(self, fp, seekable = 1): |
| """Initialize the class instance and read the headers.""" |
| if seekable == 1: |
| # Exercise tell() to make sure it works |
| # (and then assume seek() works, too) |
| try: |
| fp.tell() |
| except (AttributeError, IOError): |
| seekable = 0 |
| self.fp = fp |
| self.seekable = seekable |
| self.startofheaders = None |
| self.startofbody = None |
| # |
| if self.seekable: |
| try: |
| self.startofheaders = self.fp.tell() |
| except IOError: |
| self.seekable = 0 |
| # |
| self.readheaders() |
| # |
| if self.seekable: |
| try: |
| self.startofbody = self.fp.tell() |
| except IOError: |
| self.seekable = 0 |
| |
| def rewindbody(self): |
| """Rewind the file to the start of the body (if seekable).""" |
| if not self.seekable: |
| raise IOError("unseekable file") |
| self.fp.seek(self.startofbody) |
| |
| def readheaders(self): |
| """Read header lines. |
| |
| Read header lines up to the entirely blank line that terminates them. |
| The (normally blank) line that ends the headers is skipped, but not |
| included in the returned list. If a non-header line ends the headers, |
| (which is an error), an attempt is made to backspace over it; it is |
| never included in the returned list. |
| |
| The variable self.status is set to the empty string if all went well, |
| otherwise it is an error message. The variable self.headers is a |
| completely uninterpreted list of lines contained in the header (so |
| printing them will reproduce the header exactly as it appears in the |
| file). |
| """ |
| self.dict = {} |
| self.unixfrom = '' |
| self.headers = lst = [] |
| self.status = '' |
| headerseen = "" |
| firstline = 1 |
| startofline = unread = tell = None |
| if hasattr(self.fp, 'unread'): |
| unread = self.fp.unread |
| elif self.seekable: |
| tell = self.fp.tell |
| while 1: |
| if tell: |
| try: |
| startofline = tell() |
| except IOError: |
| startofline = tell = None |
| self.seekable = 0 |
| line = self.fp.readline() |
| if not line: |
| self.status = 'EOF in headers' |
| break |
| # Skip unix From name time lines |
| if firstline and line.startswith('From '): |
| self.unixfrom = self.unixfrom + line |
| continue |
| firstline = 0 |
| if headerseen and line[0] in ' \t': |
| # It's a continuation line. |
| lst.append(line) |
| x = (self.dict[headerseen] + "\n " + line.strip()) |
| self.dict[headerseen] = x.strip() |
| continue |
| elif self.iscomment(line): |
| # It's a comment. Ignore it. |
| continue |
| elif self.islast(line): |
| # Note! No pushback here! The delimiter line gets eaten. |
| break |
| headerseen = self.isheader(line) |
| if headerseen: |
| # It's a legal header line, save it. |
| lst.append(line) |
| self.dict[headerseen] = line[len(headerseen)+1:].strip() |
| continue |
| else: |
| # It's not a header line; throw it back and stop here. |
| if not self.dict: |
| self.status = 'No headers' |
| else: |
| self.status = 'Non-header line where header expected' |
| # Try to undo the read. |
| if unread: |
| unread(line) |
| elif tell: |
| self.fp.seek(startofline) |
| else: |
| self.status = self.status + '; bad seek' |
| break |
| |
| def isheader(self, line): |
| """Determine whether a given line is a legal header. |
| |
| This method should return the header name, suitably canonicalized. |
| You may override this method in order to use Message parsing on tagged |
| data in RFC 2822-like formats with special header formats. |
| """ |
| i = line.find(':') |
| if i > 0: |
| return line[:i].lower() |
| return None |
| |
| def islast(self, line): |
| """Determine whether a line is a legal end of RFC 2822 headers. |
| |
| You may override this method if your application wants to bend the |
| rules, e.g. to strip trailing whitespace, or to recognize MH template |
| separators ('--------'). For convenience (e.g. for code reading from |
| sockets) a line consisting of \r\n also matches. |
| """ |
| return line in _blanklines |
| |
| def iscomment(self, line): |
| """Determine whether a line should be skipped entirely. |
| |
| You may override this method in order to use Message parsing on tagged |
| data in RFC 2822-like formats that support embedded comments or |
| free-text data. |
| """ |
| return False |
| |
| def getallmatchingheaders(self, name): |
| """Find all header lines matching a given header name. |
| |
| Look through the list of headers and find all lines matching a given |
| header name (and their continuation lines). A list of the lines is |
| returned, without interpretation. If the header does not occur, an |
| empty list is returned. If the header occurs multiple times, all |
| occurrences are returned. Case is not important in the header name. |
| """ |
| name = name.lower() + ':' |
| n = len(name) |
| lst = [] |
| hit = 0 |
| for line in self.headers: |
| if line[:n].lower() == name: |
| hit = 1 |
| elif not line[:1].isspace(): |
| hit = 0 |
| if hit: |
| lst.append(line) |
| return lst |
| |
| def getfirstmatchingheader(self, name): |
| """Get the first header line matching name. |
| |
| This is similar to getallmatchingheaders, but it returns only the |
| first matching header (and its continuation lines). |
| """ |
| name = name.lower() + ':' |
| n = len(name) |
| lst = [] |
| hit = 0 |
| for line in self.headers: |
| if hit: |
| if not line[:1].isspace(): |
| break |
| elif line[:n].lower() == name: |
| hit = 1 |
| if hit: |
| lst.append(line) |
| return lst |
| |
| def getrawheader(self, name): |
| """A higher-level interface to getfirstmatchingheader(). |
| |
| Return a string containing the literal text of the header but with the |
| keyword stripped. All leading, trailing and embedded whitespace is |
| kept in the string, however. Return None if the header does not |
| occur. |
| """ |
| |
| lst = self.getfirstmatchingheader(name) |
| if not lst: |
| return None |
| lst[0] = lst[0][len(name) + 1:] |
| return ''.join(lst) |
| |
| def getheader(self, name, default=None): |
| """Get the header value for a name. |
| |
| This is the normal interface: it returns a stripped version of the |
| header value for a given header name, or None if it doesn't exist. |
| This uses the dictionary version which finds the *last* such header. |
| """ |
| return self.dict.get(name.lower(), default) |
| get = getheader |
| |
| def getheaders(self, name): |
| """Get all values for a header. |
| |
| This returns a list of values for headers given more than once; each |
| value in the result list is stripped in the same way as the result of |
| getheader(). If the header is not given, return an empty list. |
| """ |
| result = [] |
| current = '' |
| have_header = 0 |
| for s in self.getallmatchingheaders(name): |
| if s[0].isspace(): |
| if current: |
| current = "%s\n %s" % (current, s.strip()) |
| else: |
| current = s.strip() |
| else: |
| if have_header: |
| result.append(current) |
| current = s[s.find(":") + 1:].strip() |
| have_header = 1 |
| if have_header: |
| result.append(current) |
| return result |
| |
| def getaddr(self, name): |
| """Get a single address from a header, as a tuple. |
| |
| An example return value: |
| ('Guido van Rossum', 'guido@cwi.nl') |
| """ |
| # New, by Ben Escoto |
| alist = self.getaddrlist(name) |
| if alist: |
| return alist[0] |
| else: |
| return (None, None) |
| |
| def getaddrlist(self, name): |
| """Get a list of addresses from a header. |
| |
| Retrieves a list of addresses from a header, where each address is a |
| tuple as returned by getaddr(). Scans all named headers, so it works |
| properly with multiple To: or Cc: headers for example. |
| """ |
| raw = [] |
| for h in self.getallmatchingheaders(name): |
| if h[0] in ' \t': |
| raw.append(h) |
| else: |
| if raw: |
| raw.append(', ') |
| i = h.find(':') |
| if i > 0: |
| addr = h[i+1:] |
| raw.append(addr) |
| alladdrs = ''.join(raw) |
| a = AddressList(alladdrs) |
| return a.addresslist |
| |
| def getdate(self, name): |
| """Retrieve a date field from a header. |
| |
| Retrieves a date field from the named header, returning a tuple |
| compatible with time.mktime(). |
| """ |
| try: |
| data = self[name] |
| except KeyError: |
| return None |
| return parsedate(data) |
| |
| def getdate_tz(self, name): |
| """Retrieve a date field from a header as a 10-tuple. |
| |
| The first 9 elements make up a tuple compatible with time.mktime(), |
| and the 10th is the offset of the poster's time zone from GMT/UTC. |
| """ |
| try: |
| data = self[name] |
| except KeyError: |
| return None |
| return parsedate_tz(data) |
| |
| |
| # Access as a dictionary (only finds *last* header of each type): |
| |
| def __len__(self): |
| """Get the number of headers in a message.""" |
| return len(self.dict) |
| |
| def __getitem__(self, name): |
| """Get a specific header, as from a dictionary.""" |
| return self.dict[name.lower()] |
| |
| def __setitem__(self, name, value): |
| """Set the value of a header. |
| |
| Note: This is not a perfect inversion of __getitem__, because any |
| changed headers get stuck at the end of the raw-headers list rather |
| than where the altered header was. |
| """ |
| del self[name] # Won't fail if it doesn't exist |
| self.dict[name.lower()] = value |
| text = name + ": " + value |
| for line in text.split("\n"): |
| self.headers.append(line + "\n") |
| |
| def __delitem__(self, name): |
| """Delete all occurrences of a specific header, if it is present.""" |
| name = name.lower() |
| if not name in self.dict: |
| return |
| del self.dict[name] |
| name = name + ':' |
| n = len(name) |
| lst = [] |
| hit = 0 |
| for i in range(len(self.headers)): |
| line = self.headers[i] |
| if line[:n].lower() == name: |
| hit = 1 |
| elif not line[:1].isspace(): |
| hit = 0 |
| if hit: |
| lst.append(i) |
| for i in reversed(lst): |
| del self.headers[i] |
| |
| def setdefault(self, name, default=""): |
| lowername = name.lower() |
| if lowername in self.dict: |
| return self.dict[lowername] |
| else: |
| text = name + ": " + default |
| for line in text.split("\n"): |
| self.headers.append(line + "\n") |
| self.dict[lowername] = default |
| return default |
| |
| def __contains__(self, name): |
| """Determine whether a message contains the named header.""" |
| return name.lower() in self.dict |
| |
| def __iter__(self): |
| return iter(self.dict) |
| |
| def keys(self): |
| """Get all of a message's header field names.""" |
| return list(self.dict.keys()) |
| |
| def values(self): |
| """Get all of a message's header field values.""" |
| return list(self.dict.values()) |
| |
| def items(self): |
| """Get all of a message's headers. |
| |
| Returns a list of name, value tuples. |
| """ |
| return list(self.dict.items()) |
| |
| def __str__(self): |
| return ''.join(self.headers) |
| |
| |
| # Utility functions |
| # ----------------- |
| |
| # XXX Should fix unquote() and quote() to be really conformant. |
| # XXX The inverses of the parse functions may also be useful. |
| |
| |
| def unquote(s): |
| """Remove quotes from a string.""" |
| if len(s) > 1: |
| if s.startswith('"') and s.endswith('"'): |
| return s[1:-1].replace('\\\\', '\\').replace('\\"', '"') |
| if s.startswith('<') and s.endswith('>'): |
| return s[1:-1] |
| return s |
| |
| |
| def quote(s): |
| """Add quotes around a string.""" |
| return s.replace('\\', '\\\\').replace('"', '\\"') |
| |
| |
| def parseaddr(address): |
| """Parse an address into a (realname, mailaddr) tuple.""" |
| a = AddressList(address) |
| lst = a.addresslist |
| if not lst: |
| return (None, None) |
| return lst[0] |
| |
| |
| class AddrlistClass: |
| """Address parser class by Ben Escoto. |
| |
| To understand what this class does, it helps to have a copy of |
| RFC 2822 in front of you. |
| |
| http://www.faqs.org/rfcs/rfc2822.html |
| |
| Note: this class interface is deprecated and may be removed in the future. |
| Use rfc822.AddressList instead. |
| """ |
| |
| def __init__(self, field): |
| """Initialize a new instance. |
| |
| `field' is an unparsed address header field, containing one or more |
| addresses. |
| """ |
| self.specials = '()<>@,:;.\"[]' |
| self.pos = 0 |
| self.LWS = ' \t' |
| self.CR = '\r\n' |
| self.atomends = self.specials + self.LWS + self.CR |
| # Note that RFC 2822 now specifies `.' as obs-phrase, meaning that it |
| # is obsolete syntax. RFC 2822 requires that we recognize obsolete |
| # syntax, so allow dots in phrases. |
| self.phraseends = self.atomends.replace('.', '') |
| self.field = field |
| self.commentlist = [] |
| |
| def gotonext(self): |
| """Parse up to the start of the next address.""" |
| while self.pos < len(self.field): |
| if self.field[self.pos] in self.LWS + '\n\r': |
| self.pos = self.pos + 1 |
| elif self.field[self.pos] == '(': |
| self.commentlist.append(self.getcomment()) |
| else: break |
| |
| def getaddrlist(self): |
| """Parse all addresses. |
| |
| Returns a list containing all of the addresses. |
| """ |
| result = [] |
| ad = self.getaddress() |
| while ad: |
| result += ad |
| ad = self.getaddress() |
| return result |
| |
| def getaddress(self): |
| """Parse the next address.""" |
| self.commentlist = [] |
| self.gotonext() |
| |
| oldpos = self.pos |
| oldcl = self.commentlist |
| plist = self.getphraselist() |
| |
| self.gotonext() |
| returnlist = [] |
| |
| if self.pos >= len(self.field): |
| # Bad email address technically, no domain. |
| if plist: |
| returnlist = [(' '.join(self.commentlist), plist[0])] |
| |
| elif self.field[self.pos] in '.@': |
| # email address is just an addrspec |
| # this isn't very efficient since we start over |
| self.pos = oldpos |
| self.commentlist = oldcl |
| addrspec = self.getaddrspec() |
| returnlist = [(' '.join(self.commentlist), addrspec)] |
| |
| elif self.field[self.pos] == ':': |
| # address is a group |
| returnlist = [] |
| |
| fieldlen = len(self.field) |
| self.pos += 1 |
| while self.pos < len(self.field): |
| self.gotonext() |
| if self.pos < fieldlen and self.field[self.pos] == ';': |
| self.pos += 1 |
| break |
| returnlist = returnlist + self.getaddress() |
| |
| elif self.field[self.pos] == '<': |
| # Address is a phrase then a route addr |
| routeaddr = self.getrouteaddr() |
| |
| if self.commentlist: |
| returnlist = [(' '.join(plist) + ' (' + \ |
| ' '.join(self.commentlist) + ')', routeaddr)] |
| else: returnlist = [(' '.join(plist), routeaddr)] |
| |
| else: |
| if plist: |
| returnlist = [(' '.join(self.commentlist), plist[0])] |
| elif self.field[self.pos] in self.specials: |
| self.pos += 1 |
| |
| self.gotonext() |
| if self.pos < len(self.field) and self.field[self.pos] == ',': |
| self.pos += 1 |
| return returnlist |
| |
| def getrouteaddr(self): |
| """Parse a route address (Return-path value). |
| |
| This method just skips all the route stuff and returns the addrspec. |
| """ |
| if self.field[self.pos] != '<': |
| return |
| |
| expectroute = 0 |
| self.pos += 1 |
| self.gotonext() |
| adlist = "" |
| while self.pos < len(self.field): |
| if expectroute: |
| self.getdomain() |
| expectroute = 0 |
| elif self.field[self.pos] == '>': |
| self.pos += 1 |
| break |
| elif self.field[self.pos] == '@': |
| self.pos += 1 |
| expectroute = 1 |
| elif self.field[self.pos] == ':': |
| self.pos += 1 |
| else: |
| adlist = self.getaddrspec() |
| self.pos += 1 |
| break |
| self.gotonext() |
| |
| return adlist |
| |
| def getaddrspec(self): |
| """Parse an RFC 2822 addr-spec.""" |
| aslist = [] |
| |
| self.gotonext() |
| while self.pos < len(self.field): |
| if self.field[self.pos] == '.': |
| aslist.append('.') |
| self.pos += 1 |
| elif self.field[self.pos] == '"': |
| aslist.append('"%s"' % self.getquote()) |
| elif self.field[self.pos] in self.atomends: |
| break |
| else: aslist.append(self.getatom()) |
| self.gotonext() |
| |
| if self.pos >= len(self.field) or self.field[self.pos] != '@': |
| return ''.join(aslist) |
| |
| aslist.append('@') |
| self.pos += 1 |
| self.gotonext() |
| return ''.join(aslist) + self.getdomain() |
| |
| def getdomain(self): |
| """Get the complete domain name from an address.""" |
| sdlist = [] |
| while self.pos < len(self.field): |
| if self.field[self.pos] in self.LWS: |
| self.pos += 1 |
| elif self.field[self.pos] == '(': |
| self.commentlist.append(self.getcomment()) |
| elif self.field[self.pos] == '[': |
| sdlist.append(self.getdomainliteral()) |
| elif self.field[self.pos] == '.': |
| self.pos += 1 |
| sdlist.append('.') |
| elif self.field[self.pos] in self.atomends: |
| break |
| else: sdlist.append(self.getatom()) |
| return ''.join(sdlist) |
| |
| def getdelimited(self, beginchar, endchars, allowcomments = 1): |
| """Parse a header fragment delimited by special characters. |
| |
| `beginchar' is the start character for the fragment. If self is not |
| looking at an instance of `beginchar' then getdelimited returns the |
| empty string. |
| |
| `endchars' is a sequence of allowable end-delimiting characters. |
| Parsing stops when one of these is encountered. |
| |
| If `allowcomments' is non-zero, embedded RFC 2822 comments are allowed |
| within the parsed fragment. |
| """ |
| if self.field[self.pos] != beginchar: |
| return '' |
| |
| slist = [''] |
| quote = 0 |
| self.pos += 1 |
| while self.pos < len(self.field): |
| if quote == 1: |
| slist.append(self.field[self.pos]) |
| quote = 0 |
| elif self.field[self.pos] in endchars: |
| self.pos += 1 |
| break |
| elif allowcomments and self.field[self.pos] == '(': |
| slist.append(self.getcomment()) |
| continue # have already advanced pos from getcomment |
| elif self.field[self.pos] == '\\': |
| quote = 1 |
| else: |
| slist.append(self.field[self.pos]) |
| self.pos += 1 |
| |
| return ''.join(slist) |
| |
| def getquote(self): |
| """Get a quote-delimited fragment from self's field.""" |
| return self.getdelimited('"', '"\r', 0) |
| |
| def getcomment(self): |
| """Get a parenthesis-delimited fragment from self's field.""" |
| return self.getdelimited('(', ')\r', 1) |
| |
| def getdomainliteral(self): |
| """Parse an RFC 2822 domain-literal.""" |
| return '[%s]' % self.getdelimited('[', ']\r', 0) |
| |
| def getatom(self, atomends=None): |
| """Parse an RFC 2822 atom. |
| |
| Optional atomends specifies a different set of end token delimiters |
| (the default is to use self.atomends). This is used e.g. in |
| getphraselist() since phrase endings must not include the `.' (which |
| is legal in phrases).""" |
| atomlist = [''] |
| if atomends is None: |
| atomends = self.atomends |
| |
| while self.pos < len(self.field): |
| if self.field[self.pos] in atomends: |
| break |
| else: atomlist.append(self.field[self.pos]) |
| self.pos += 1 |
| |
| return ''.join(atomlist) |
| |
| def getphraselist(self): |
| """Parse a sequence of RFC 2822 phrases. |
| |
| A phrase is a sequence of words, which are in turn either RFC 2822 |
| atoms or quoted-strings. Phrases are canonicalized by squeezing all |
| runs of continuous whitespace into one space. |
| """ |
| plist = [] |
| |
| while self.pos < len(self.field): |
| if self.field[self.pos] in self.LWS: |
| self.pos += 1 |
| elif self.field[self.pos] == '"': |
| plist.append(self.getquote()) |
| elif self.field[self.pos] == '(': |
| self.commentlist.append(self.getcomment()) |
| elif self.field[self.pos] in self.phraseends: |
| break |
| else: |
| plist.append(self.getatom(self.phraseends)) |
| |
| return plist |
| |
| class AddressList(AddrlistClass): |
| """An AddressList encapsulates a list of parsed RFC 2822 addresses.""" |
| def __init__(self, field): |
| AddrlistClass.__init__(self, field) |
| if field: |
| self.addresslist = self.getaddrlist() |
| else: |
| self.addresslist = [] |
| |
| def __len__(self): |
| return len(self.addresslist) |
| |
| def __str__(self): |
| return ", ".join(map(dump_address_pair, self.addresslist)) |
| |
| def __add__(self, other): |
| # Set union |
| newaddr = AddressList(None) |
| newaddr.addresslist = self.addresslist[:] |
| for x in other.addresslist: |
| if not x in self.addresslist: |
| newaddr.addresslist.append(x) |
| return newaddr |
| |
| def __iadd__(self, other): |
| # Set union, in-place |
| for x in other.addresslist: |
| if not x in self.addresslist: |
| self.addresslist.append(x) |
| return self |
| |
| def __sub__(self, other): |
| # Set difference |
| newaddr = AddressList(None) |
| for x in self.addresslist: |
| if not x in other.addresslist: |
| newaddr.addresslist.append(x) |
| return newaddr |
| |
| def __isub__(self, other): |
| # Set difference, in-place |
| for x in other.addresslist: |
| if x in self.addresslist: |
| self.addresslist.remove(x) |
| return self |
| |
| def __getitem__(self, index): |
| # Make indexing, slices, and 'in' work |
| return self.addresslist[index] |
| |
| def dump_address_pair(pair): |
| """Dump a (name, address) pair in a canonicalized form.""" |
| if pair[0]: |
| return '"' + pair[0] + '" <' + pair[1] + '>' |
| else: |
| return pair[1] |
| |
| # Parse a date field |
| |
| _monthnames = ['jan', 'feb', 'mar', 'apr', 'may', 'jun', 'jul', |
| 'aug', 'sep', 'oct', 'nov', 'dec', |
| 'january', 'february', 'march', 'april', 'may', 'june', 'july', |
| 'august', 'september', 'october', 'november', 'december'] |
| _daynames = ['mon', 'tue', 'wed', 'thu', 'fri', 'sat', 'sun'] |
| |
| # The timezone table does not include the military time zones defined |
| # in RFC822, other than Z. According to RFC1123, the description in |
| # RFC822 gets the signs wrong, so we can't rely on any such time |
| # zones. RFC1123 recommends that numeric timezone indicators be used |
| # instead of timezone names. |
| |
| _timezones = {'UT':0, 'UTC':0, 'GMT':0, 'Z':0, |
| 'AST': -400, 'ADT': -300, # Atlantic (used in Canada) |
| 'EST': -500, 'EDT': -400, # Eastern |
| 'CST': -600, 'CDT': -500, # Central |
| 'MST': -700, 'MDT': -600, # Mountain |
| 'PST': -800, 'PDT': -700 # Pacific |
| } |
| |
| |
| def parsedate_tz(data): |
| """Convert a date string to a time tuple. |
| |
| Accounts for military timezones. |
| """ |
| if not data: |
| return None |
| data = data.split() |
| if data[0][-1] in (',', '.') or data[0].lower() in _daynames: |
| # There's a dayname here. Skip it |
| del data[0] |
| else: |
| # no space after the "weekday,"? |
| i = data[0].rfind(',') |
| if i >= 0: |
| data[0] = data[0][i+1:] |
| if len(data) == 3: # RFC 850 date, deprecated |
| stuff = data[0].split('-') |
| if len(stuff) == 3: |
| data = stuff + data[1:] |
| if len(data) == 4: |
| s = data[3] |
| i = s.find('+') |
| if i > 0: |
| data[3:] = [s[:i], s[i+1:]] |
| else: |
| data.append('') # Dummy tz |
| if len(data) < 5: |
| return None |
| data = data[:5] |
| [dd, mm, yy, tm, tz] = data |
| mm = mm.lower() |
| if not mm in _monthnames: |
| dd, mm = mm, dd.lower() |
| if not mm in _monthnames: |
| return None |
| mm = _monthnames.index(mm)+1 |
| if mm > 12: mm = mm - 12 |
| if dd[-1] == ',': |
| dd = dd[:-1] |
| i = yy.find(':') |
| if i > 0: |
| yy, tm = tm, yy |
| if yy[-1] == ',': |
| yy = yy[:-1] |
| if not yy[0].isdigit(): |
| yy, tz = tz, yy |
| if tm[-1] == ',': |
| tm = tm[:-1] |
| tm = tm.split(':') |
| if len(tm) == 2: |
| [thh, tmm] = tm |
| tss = '0' |
| elif len(tm) == 3: |
| [thh, tmm, tss] = tm |
| else: |
| return None |
| try: |
| yy = int(yy) |
| dd = int(dd) |
| thh = int(thh) |
| tmm = int(tmm) |
| tss = int(tss) |
| except ValueError: |
| return None |
| tzoffset = None |
| tz = tz.upper() |
| if tz in _timezones: |
| tzoffset = _timezones[tz] |
| else: |
| try: |
| tzoffset = int(tz) |
| except ValueError: |
| pass |
| # Convert a timezone offset into seconds ; -0500 -> -18000 |
| if tzoffset: |
| if tzoffset < 0: |
| tzsign = -1 |
| tzoffset = -tzoffset |
| else: |
| tzsign = 1 |
| tzoffset = tzsign * ( (tzoffset//100)*3600 + (tzoffset % 100)*60) |
| return (yy, mm, dd, thh, tmm, tss, 0, 1, 0, tzoffset) |
| |
| |
| def parsedate(data): |
| """Convert a time string to a time tuple.""" |
| t = parsedate_tz(data) |
| if t is None: |
| return t |
| return t[:9] |
| |
| |
| def mktime_tz(data): |
| """Turn a 10-tuple as returned by parsedate_tz() into a UTC timestamp.""" |
| if data[9] is None: |
| # No zone info, so localtime is better assumption than GMT |
| return time.mktime(data[:8] + (-1,)) |
| else: |
| t = time.mktime(data[:8] + (0,)) |
| return t - data[9] - time.timezone |
| |
| def formatdate(timeval=None): |
| """Returns time format preferred for Internet standards. |
| |
| Sun, 06 Nov 1994 08:49:37 GMT ; RFC 822, updated by RFC 1123 |
| |
| According to RFC 1123, day and month names must always be in |
| English. If not for that, this code could use strftime(). It |
| can't because strftime() honors the locale and could generated |
| non-English names. |
| """ |
| if timeval is None: |
| timeval = time.time() |
| timeval = time.gmtime(timeval) |
| return "%s, %02d %s %04d %02d:%02d:%02d GMT" % ( |
| ("Mon", "Tue", "Wed", "Thu", "Fri", "Sat", "Sun")[timeval[6]], |
| timeval[2], |
| ("Jan", "Feb", "Mar", "Apr", "May", "Jun", |
| "Jul", "Aug", "Sep", "Oct", "Nov", "Dec")[timeval[1]-1], |
| timeval[0], timeval[3], timeval[4], timeval[5]) |
| |
| |
| # When used as script, run a small test program. |
| # The first command line argument must be a filename containing one |
| # message in RFC-822 format. |
| |
| if __name__ == '__main__': |
| import sys, os |
| file = os.path.join(os.environ['HOME'], 'Mail/inbox/1') |
| if sys.argv[1:]: file = sys.argv[1] |
| f = open(file, 'r') |
| m = Message(f) |
| print('From:', m.getaddr('from')) |
| print('To:', m.getaddrlist('to')) |
| print('Subject:', m.getheader('subject')) |
| print('Date:', m.getheader('date')) |
| date = m.getdate_tz('date') |
| tz = date[-1] |
| date = time.localtime(mktime_tz(date)) |
| if date: |
| print('ParsedDate:', time.asctime(date), end=' ') |
| hhmmss = tz |
| hhmm, ss = divmod(hhmmss, 60) |
| hh, mm = divmod(hhmm, 60) |
| print("%+03d%02d" % (hh, mm), end=' ') |
| if ss: print(".%02d" % ss, end=' ') |
| print() |
| else: |
| print('ParsedDate:', None) |
| m.rewindbody() |
| n = 0 |
| while f.readline(): |
| n += 1 |
| print('Lines:', n) |
| print('-'*70) |
| print('len =', len(m)) |
| if 'Date' in m: print('Date =', m['Date']) |
| if 'X-Nonsense' in m: pass |
| print('keys =', m.keys()) |
| print('values =', m.values()) |
| print('items =', m.items()) |