| # Top-level Makefile for Python |
| # |
| # As distributed, this file is called Makefile.pre.in; it is processed |
| # into the real Makefile by running the script ./configure, which |
| # replaces things like @spam@ with values appropriate for your system. |
| # This means that if you edit Makefile, your changes get lost the next |
| # time you run the configure script. Ideally, you can do: |
| # |
| # ./configure |
| # make |
| # make test |
| # make install |
| # |
| # If you have a previous version of Python installed that you don't |
| # want to overwrite, you can use "make altinstall" instead of "make |
| # install". Refer to the "Installing" section in the README file for |
| # additional details. |
| # |
| # See also the section "Build instructions" in the README file. |
| |
| # === Variables set by makesetup === |
| |
| MODOBJS= _MODOBJS_ |
| MODLIBS= _MODLIBS_ |
| |
| # === Variables set by configure |
| VERSION= @VERSION@ |
| srcdir= @srcdir@ |
| VPATH= @srcdir@ |
| |
| CC= @CC@ |
| CXX= @CXX@ |
| MAINCC= @MAINCC@ |
| LINKCC= @LINKCC@ |
| AR= @AR@ |
| RANLIB= @RANLIB@ |
| SVNVERSION= @SVNVERSION@ |
| SOABI= @SOABI@ |
| LDVERSION= @LDVERSION@ |
| HGVERSION= @HGVERSION@ |
| HGTAG= @HGTAG@ |
| HGBRANCH= @HGBRANCH@ |
| |
| GNULD= @GNULD@ |
| |
| # Shell used by make (some versions default to the login shell, which is bad) |
| SHELL= /bin/sh |
| |
| # Use this to make a link between python$(VERSION) and python in $(BINDIR) |
| LN= @LN@ |
| |
| # Portable install script (configure doesn't always guess right) |
| INSTALL= @INSTALL@ |
| INSTALL_PROGRAM=@INSTALL_PROGRAM@ |
| INSTALL_SCRIPT= @INSTALL_SCRIPT@ |
| INSTALL_DATA= @INSTALL_DATA@ |
| # Shared libraries must be installed with executable mode on some systems; |
| # rather than figuring out exactly which, we always give them executable mode. |
| # Also, making them read-only seems to be a good idea... |
| INSTALL_SHARED= ${INSTALL} -m 555 |
| |
| MAKESETUP= $(srcdir)/Modules/makesetup |
| |
| # Compiler options |
| OPT= @OPT@ |
| BASECFLAGS= @BASECFLAGS@ |
| CONFIGURE_CFLAGS= @CFLAGS@ |
| CONFIGURE_CPPFLAGS= @CPPFLAGS@ |
| CONFIGURE_LDFLAGS= @LDFLAGS@ |
| # Avoid assigning CFLAGS, LDFLAGS, etc. so users can use them on the |
| # command line to append to these values without stomping the pre-set |
| # values. |
| PY_CFLAGS= $(BASECFLAGS) $(OPT) $(CONFIGURE_CFLAGS) $(CFLAGS) $(EXTRA_CFLAGS) |
| # Both CPPFLAGS and LDFLAGS need to contain the shell's value for setup.py to |
| # be able to build extension modules using the directories specified in the |
| # environment variables |
| PY_CPPFLAGS= -I. -IInclude -I$(srcdir)/Include $(CONFIGURE_CPPFLAGS) $(CPPFLAGS) |
| PY_LDFLAGS= $(CONFIGURE_LDFLAGS) $(LDFLAGS) |
| NO_AS_NEEDED= @NO_AS_NEEDED@ |
| LDLAST= @LDLAST@ |
| SGI_ABI= @SGI_ABI@ |
| CCSHARED= @CCSHARED@ |
| LINKFORSHARED= @LINKFORSHARED@ |
| ARFLAGS= @ARFLAGS@ |
| # Extra C flags added for building the interpreter object files. |
| CFLAGSFORSHARED=@CFLAGSFORSHARED@ |
| # C flags used for building the interpreter object files |
| PY_CORE_CFLAGS= $(PY_CFLAGS) $(PY_CPPFLAGS) $(CFLAGSFORSHARED) -DPy_BUILD_CORE |
| |
| |
| # Machine-dependent subdirectories |
| MACHDEP= @MACHDEP@ |
| |
| # Install prefix for architecture-independent files |
| prefix= @prefix@ |
| |
| # Install prefix for architecture-dependent files |
| exec_prefix= @exec_prefix@ |
| |
| # Install prefix for data files |
| datarootdir= @datarootdir@ |
| |
| # Expanded directories |
| BINDIR= @bindir@ |
| LIBDIR= @libdir@ |
| MANDIR= @mandir@ |
| INCLUDEDIR= @includedir@ |
| CONFINCLUDEDIR= $(exec_prefix)/include |
| SCRIPTDIR= $(prefix)/lib |
| ABIFLAGS= @ABIFLAGS@ |
| |
| # Detailed destination directories |
| BINLIBDEST= $(LIBDIR)/python$(VERSION) |
| LIBDEST= $(SCRIPTDIR)/python$(VERSION) |
| INCLUDEPY= $(INCLUDEDIR)/python$(LDVERSION) |
| CONFINCLUDEPY= $(CONFINCLUDEDIR)/python$(LDVERSION) |
| |
| # Symbols used for using shared libraries |
| SO= @SO@ |
| LDSHARED= @LDSHARED@ $(PY_LDFLAGS) |
| BLDSHARED= @BLDSHARED@ $(PY_LDFLAGS) |
| LDCXXSHARED= @LDCXXSHARED@ |
| DESTSHARED= $(BINLIBDEST)/lib-dynload |
| |
| # Executable suffix (.exe on Windows and Mac OS X) |
| EXE= @EXEEXT@ |
| BUILDEXE= @BUILDEXEEXT@ |
| |
| # Short name and location for Mac OS X Python framework |
| UNIVERSALSDK=@UNIVERSALSDK@ |
| PYTHONFRAMEWORK= @PYTHONFRAMEWORK@ |
| PYTHONFRAMEWORKDIR= @PYTHONFRAMEWORKDIR@ |
| PYTHONFRAMEWORKPREFIX= @PYTHONFRAMEWORKPREFIX@ |
| PYTHONFRAMEWORKINSTALLDIR= @PYTHONFRAMEWORKINSTALLDIR@ |
| # Deployment target selected during configure, to be checked |
| # by distutils. The export statement is needed to ensure that the |
| # deployment target is active during build. |
| MACOSX_DEPLOYMENT_TARGET=@CONFIGURE_MACOSX_DEPLOYMENT_TARGET@ |
| @EXPORT_MACOSX_DEPLOYMENT_TARGET@export MACOSX_DEPLOYMENT_TARGET |
| |
| # Options to enable prebinding (for fast startup prior to Mac OS X 10.3) |
| OTHER_LIBTOOL_OPT=@OTHER_LIBTOOL_OPT@ |
| |
| # Environment to run shared python without installed libraries |
| RUNSHARED= @RUNSHARED@ |
| |
| # Modes for directories, executables and data files created by the |
| # install process. Default to user-only-writable for all file types. |
| DIRMODE= 755 |
| EXEMODE= 755 |
| FILEMODE= 644 |
| |
| # configure script arguments |
| CONFIG_ARGS= @CONFIG_ARGS@ |
| |
| |
| # Subdirectories with code |
| SRCDIRS= @SRCDIRS@ |
| |
| # Other subdirectories |
| SUBDIRSTOO= Include Lib Misc |
| |
| # Files and directories to be distributed |
| CONFIGFILES= configure configure.in acconfig.h pyconfig.h.in Makefile.pre.in |
| DISTFILES= README ChangeLog $(CONFIGFILES) |
| DISTDIRS= $(SUBDIRS) $(SUBDIRSTOO) Ext-dummy |
| DIST= $(DISTFILES) $(DISTDIRS) |
| |
| |
| LIBRARY= @LIBRARY@ |
| LDLIBRARY= @LDLIBRARY@ |
| BLDLIBRARY= @BLDLIBRARY@ |
| PY3LIBRARY= @PY3LIBRARY@ |
| DLLLIBRARY= @DLLLIBRARY@ |
| LDLIBRARYDIR= @LDLIBRARYDIR@ |
| INSTSONAME= @INSTSONAME@ |
| |
| |
| LIBS= @LIBS@ |
| LIBM= @LIBM@ |
| LIBC= @LIBC@ |
| SYSLIBS= $(LIBM) $(LIBC) |
| SHLIBS= @SHLIBS@ |
| |
| THREADOBJ= @THREADOBJ@ |
| DLINCLDIR= @DLINCLDIR@ |
| DYNLOADFILE= @DYNLOADFILE@ |
| MACHDEP_OBJS= @MACHDEP_OBJS@ |
| LIBOBJDIR= Python/ |
| LIBOBJS= @LIBOBJS@ |
| |
| PYTHON= python$(EXE) |
| BUILDPYTHON= python$(BUILDEXE) |
| |
| # The task to run while instrument when building the profile-opt target |
| PROFILE_TASK= $(srcdir)/Tools/pybench/pybench.py -n 2 --with-gc --with-syscheck |
| #PROFILE_TASK= $(srcdir)/Lib/test/regrtest.py |
| |
| # === Definitions added by makesetup === |
| |
| |
| ########################################################################## |
| # Modules |
| MODULE_OBJS= \ |
| Modules/config.o \ |
| Modules/getpath.o \ |
| Modules/main.o \ |
| Modules/gcmodule.o |
| |
| # Used of signalmodule.o is not available |
| SIGNAL_OBJS= @SIGNAL_OBJS@ |
| |
| IO_H= Modules/_io/_iomodule.h |
| |
| IO_OBJS= \ |
| Modules/_io/_iomodule.o \ |
| Modules/_io/iobase.o \ |
| Modules/_io/fileio.o \ |
| Modules/_io/bufferedio.o \ |
| Modules/_io/textio.o \ |
| Modules/_io/bytesio.o \ |
| Modules/_io/stringio.o |
| |
| ########################################################################## |
| # Grammar |
| GRAMMAR_H= $(srcdir)/Include/graminit.h |
| GRAMMAR_C= $(srcdir)/Python/graminit.c |
| GRAMMAR_INPUT= $(srcdir)/Grammar/Grammar |
| |
| |
| LIBFFI_INCLUDEDIR= @LIBFFI_INCLUDEDIR@ |
| |
| ########################################################################## |
| # Parser |
| PGEN= Parser/pgen$(EXE) |
| |
| POBJS= \ |
| Parser/acceler.o \ |
| Parser/grammar1.o \ |
| Parser/listnode.o \ |
| Parser/node.o \ |
| Parser/parser.o \ |
| Parser/parsetok.o \ |
| Parser/bitset.o \ |
| Parser/metagrammar.o \ |
| Parser/firstsets.o \ |
| Parser/grammar.o \ |
| Parser/pgen.o |
| |
| PARSER_OBJS= $(POBJS) Parser/myreadline.o Parser/tokenizer.o |
| |
| PGOBJS= \ |
| Objects/obmalloc.o \ |
| Python/dynamic_annotations.o \ |
| Python/mysnprintf.o \ |
| Python/pyctype.o \ |
| Parser/tokenizer_pgen.o \ |
| Parser/printgrammar.o \ |
| Parser/pgenmain.o |
| |
| PARSER_HEADERS= \ |
| Parser/parser.h \ |
| Parser/tokenizer.h |
| |
| PGENOBJS= $(PGENMAIN) $(POBJS) $(PGOBJS) |
| |
| ########################################################################## |
| # AST |
| AST_H_DIR= $(srcdir)/Include |
| AST_H= $(AST_H_DIR)/Python-ast.h |
| AST_C_DIR= $(srcdir)/Python |
| AST_C= $(AST_C_DIR)/Python-ast.c |
| AST_ASDL= $(srcdir)/Parser/Python.asdl |
| |
| ASDLGEN_FILES= $(srcdir)/Parser/asdl.py $(srcdir)/Parser/asdl_c.py |
| # XXX Note that a build now requires Python exist before the build starts |
| ASDLGEN= $(srcdir)/Parser/asdl_c.py |
| |
| ########################################################################## |
| # Python |
| |
| OPCODETARGETS_H= \ |
| $(srcdir)/Python/opcode_targets.h |
| |
| OPCODETARGETGEN= \ |
| $(srcdir)/Python/makeopcodetargets.py |
| |
| OPCODETARGETGEN_FILES= \ |
| $(OPCODETARGETGEN) $(srcdir)/Lib/opcode.py |
| |
| PYTHON_OBJS= \ |
| Python/_warnings.o \ |
| Python/Python-ast.o \ |
| Python/asdl.o \ |
| Python/ast.o \ |
| Python/bltinmodule.o \ |
| Python/ceval.o \ |
| Python/compile.o \ |
| Python/codecs.o \ |
| Python/dynamic_annotations.o \ |
| Python/errors.o \ |
| Python/frozen.o \ |
| Python/frozenmain.o \ |
| Python/future.o \ |
| Python/getargs.o \ |
| Python/getcompiler.o \ |
| Python/getcopyright.o \ |
| Python/getplatform.o \ |
| Python/getversion.o \ |
| Python/graminit.o \ |
| Python/import.o \ |
| Python/importdl.o \ |
| Python/marshal.o \ |
| Python/modsupport.o \ |
| Python/mystrtoul.o \ |
| Python/mysnprintf.o \ |
| Python/peephole.o \ |
| Python/pyarena.o \ |
| Python/pyctype.o \ |
| Python/pyfpe.o \ |
| Python/pymath.o \ |
| Python/pystate.o \ |
| Python/pythonrun.o \ |
| Python/pytime.o \ |
| Python/structmember.o \ |
| Python/symtable.o \ |
| Python/sysmodule.o \ |
| Python/traceback.o \ |
| Python/getopt.o \ |
| Python/pystrcmp.o \ |
| Python/pystrtod.o \ |
| Python/dtoa.o \ |
| Python/formatter_unicode.o \ |
| Python/fileutils.o \ |
| Python/$(DYNLOADFILE) \ |
| $(LIBOBJS) \ |
| $(MACHDEP_OBJS) \ |
| $(THREADOBJ) |
| |
| |
| ########################################################################## |
| # Objects |
| OBJECT_OBJS= \ |
| Objects/abstract.o \ |
| Objects/boolobject.o \ |
| Objects/bytes_methods.o \ |
| Objects/bytearrayobject.o \ |
| Objects/bytesobject.o \ |
| Objects/cellobject.o \ |
| Objects/classobject.o \ |
| Objects/codeobject.o \ |
| Objects/complexobject.o \ |
| Objects/descrobject.o \ |
| Objects/enumobject.o \ |
| Objects/exceptions.o \ |
| Objects/genobject.o \ |
| Objects/fileobject.o \ |
| Objects/floatobject.o \ |
| Objects/frameobject.o \ |
| Objects/funcobject.o \ |
| Objects/iterobject.o \ |
| Objects/listobject.o \ |
| Objects/longobject.o \ |
| Objects/dictobject.o \ |
| Objects/memoryobject.o \ |
| Objects/methodobject.o \ |
| Objects/moduleobject.o \ |
| Objects/object.o \ |
| Objects/obmalloc.o \ |
| Objects/capsule.o \ |
| Objects/rangeobject.o \ |
| Objects/setobject.o \ |
| Objects/sliceobject.o \ |
| Objects/structseq.o \ |
| Objects/tupleobject.o \ |
| Objects/typeobject.o \ |
| Objects/unicodeobject.o \ |
| Objects/unicodectype.o \ |
| Objects/weakrefobject.o |
| |
| |
| ########################################################################## |
| # objects that get linked into the Python library |
| LIBRARY_OBJS= \ |
| Modules/getbuildinfo.o \ |
| $(PARSER_OBJS) \ |
| $(OBJECT_OBJS) \ |
| $(PYTHON_OBJS) \ |
| $(MODULE_OBJS) \ |
| $(SIGNAL_OBJS) \ |
| $(MODOBJS) |
| |
| ######################################################################### |
| # Rules |
| |
| # Default target |
| all: build_all |
| build_all: $(BUILDPYTHON) oldsharedmods sharedmods gdbhooks Modules/_testembed |
| |
| # Compile a binary with gcc profile guided optimization. |
| profile-opt: |
| @echo "Building with support for profile generation:" |
| $(MAKE) clean |
| $(MAKE) build_all_generate_profile |
| @echo "Running benchmark to generate profile data:" |
| $(MAKE) profile-removal |
| $(MAKE) run_profile_task |
| @echo "Rebuilding with profile guided optimizations:" |
| $(MAKE) clean |
| $(MAKE) build_all_use_profile |
| |
| build_all_generate_profile: |
| $(MAKE) all CFLAGS="$(CFLAGS) -fprofile-generate" LIBS="$(LIBS) -lgcov" |
| |
| run_profile_task: |
| ./$(BUILDPYTHON) $(PROFILE_TASK) |
| |
| build_all_use_profile: |
| $(MAKE) all CFLAGS="$(CFLAGS) -fprofile-use" |
| |
| coverage: |
| @echo "Building with support for coverage checking:" |
| $(MAKE) clean |
| $(MAKE) all CFLAGS="$(CFLAGS) -O0 -pg -fprofile-arcs -ftest-coverage" LIBS="$(LIBS) -lgcov" |
| |
| |
| # Build the interpreter |
| $(BUILDPYTHON): Modules/python.o $(LIBRARY) $(LDLIBRARY) $(PY3LIBRARY) |
| $(LINKCC) $(PY_LDFLAGS) $(LINKFORSHARED) -o $@ Modules/python.o $(BLDLIBRARY) $(LIBS) $(MODLIBS) $(SYSLIBS) $(LDLAST) |
| |
| platform: $(BUILDPYTHON) |
| $(RUNSHARED) ./$(BUILDPYTHON) -E -c 'import sys ; from sysconfig import get_platform ; print(get_platform()+"-"+sys.version[0:3])' >platform |
| |
| |
| # Build the shared modules |
| sharedmods: $(BUILDPYTHON) |
| @case $$MAKEFLAGS in \ |
| *s*) $(RUNSHARED) CC='$(CC)' LDSHARED='$(BLDSHARED)' OPT='$(OPT)' ./$(BUILDPYTHON) -E $(srcdir)/setup.py -q build;; \ |
| *) $(RUNSHARED) CC='$(CC)' LDSHARED='$(BLDSHARED)' OPT='$(OPT)' ./$(BUILDPYTHON) -E $(srcdir)/setup.py build;; \ |
| esac |
| |
| # Build static library |
| # avoid long command lines, same as LIBRARY_OBJS |
| $(LIBRARY): $(LIBRARY_OBJS) |
| -rm -f $@ |
| $(AR) $(ARFLAGS) $@ Modules/getbuildinfo.o |
| $(AR) $(ARFLAGS) $@ $(PARSER_OBJS) |
| $(AR) $(ARFLAGS) $@ $(OBJECT_OBJS) |
| $(AR) $(ARFLAGS) $@ $(PYTHON_OBJS) |
| $(AR) $(ARFLAGS) $@ $(MODULE_OBJS) $(SIGNAL_OBJS) |
| $(AR) $(ARFLAGS) $@ $(MODOBJS) |
| $(RANLIB) $@ |
| |
| libpython$(LDVERSION).so: $(LIBRARY_OBJS) |
| if test $(INSTSONAME) != $(LDLIBRARY); then \ |
| $(BLDSHARED) -Wl,-h$(INSTSONAME) -o $(INSTSONAME) $(LIBRARY_OBJS) $(MODLIBS) $(SHLIBS) $(LIBC) $(LIBM) $(LDLAST); \ |
| $(LN) -f $(INSTSONAME) $@; \ |
| else \ |
| $(BLDSHARED) -o $@ $(LIBRARY_OBJS) $(MODLIBS) $(SHLIBS) $(LIBC) $(LIBM) $(LDLAST); \ |
| fi |
| |
| libpython3.so: libpython$(LDVERSION).so |
| $(BLDSHARED) $(NO_AS_NEEDED) -o $@ -Wl,-h$@ $^ |
| |
| libpython$(LDVERSION).dylib: $(LIBRARY_OBJS) |
| $(CC) -dynamiclib -Wl,-single_module $(PY_LDFLAGS) -undefined dynamic_lookup -Wl,-install_name,$(prefix)/lib/libpython$(LDVERSION).dylib -Wl,-compatibility_version,$(VERSION) -Wl,-current_version,$(VERSION) -o $@ $(LIBRARY_OBJS) $(SHLIBS) $(LIBC) $(LIBM) $(LDLAST); \ |
| |
| |
| libpython$(VERSION).sl: $(LIBRARY_OBJS) |
| $(LDSHARED) -o $@ $(LIBRARY_OBJS) $(MODLIBS) $(SHLIBS) $(LIBC) $(LIBM) $(LDLAST) |
| |
| # Copy up the gdb python hooks into a position where they can be automatically |
| # loaded by gdb during Lib/test/test_gdb.py |
| # |
| # Distributors are likely to want to install this somewhere else e.g. relative |
| # to the stripped DWARF data for the shared library. |
| gdbhooks: $(BUILDPYTHON)-gdb.py |
| |
| SRC_GDB_HOOKS=$(srcdir)/Tools/gdb/libpython.py |
| $(BUILDPYTHON)-gdb.py: $(SRC_GDB_HOOKS) |
| $(INSTALL_DATA) $(SRC_GDB_HOOKS) $(BUILDPYTHON)-gdb.py |
| |
| # This rule is here for OPENSTEP/Rhapsody/MacOSX. It builds a temporary |
| # minimal framework (not including the Lib directory and such) in the current |
| # directory. |
| RESSRCDIR=Mac/Resources/framework |
| $(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)/$(PYTHONFRAMEWORK): \ |
| $(LIBRARY) \ |
| $(RESSRCDIR)/Info.plist |
| $(INSTALL) -d -m $(DIRMODE) $(PYTHONFRAMEWORKDIR)/Versions/$(VERSION) |
| $(CC) -o $(LDLIBRARY) $(PY_LDFLAGS) -dynamiclib \ |
| -all_load $(LIBRARY) -Wl,-single_module \ |
| -install_name $(DESTDIR)$(PYTHONFRAMEWORKINSTALLDIR)/Versions/$(VERSION)/$(PYTHONFRAMEWORK) \ |
| -compatibility_version $(VERSION) \ |
| -current_version $(VERSION) \ |
| -framework CoreFoundation $(LIBS); |
| $(INSTALL) -d -m $(DIRMODE) \ |
| $(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)/Resources/English.lproj |
| $(INSTALL_DATA) $(RESSRCDIR)/Info.plist \ |
| $(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)/Resources/Info.plist |
| $(LN) -fsn $(VERSION) $(PYTHONFRAMEWORKDIR)/Versions/Current |
| $(LN) -fsn Versions/Current/$(PYTHONFRAMEWORK) $(PYTHONFRAMEWORKDIR)/$(PYTHONFRAMEWORK) |
| $(LN) -fsn Versions/Current/Resources $(PYTHONFRAMEWORKDIR)/Resources |
| |
| # This rule builds the Cygwin Python DLL and import library if configured |
| # for a shared core library; otherwise, this rule is a noop. |
| $(DLLLIBRARY) libpython$(VERSION).dll.a: $(LIBRARY_OBJS) |
| if test -n "$(DLLLIBRARY)"; then \ |
| $(LDSHARED) -Wl,--out-implib=$@ -o $(DLLLIBRARY) $^ \ |
| $(LIBS) $(MODLIBS) $(SYSLIBS) $(LDLAST); \ |
| else true; \ |
| fi |
| |
| |
| oldsharedmods: $(SHAREDMODS) |
| |
| |
| Makefile Modules/config.c: Makefile.pre \ |
| $(srcdir)/Modules/config.c.in \ |
| $(MAKESETUP) \ |
| Modules/Setup.config \ |
| Modules/Setup \ |
| Modules/Setup.local |
| $(SHELL) $(MAKESETUP) -c $(srcdir)/Modules/config.c.in \ |
| -s Modules \ |
| Modules/Setup.config \ |
| Modules/Setup.local \ |
| Modules/Setup |
| @mv config.c Modules |
| @echo "The Makefile was updated, you may need to re-run make." |
| |
| |
| Modules/Setup: $(srcdir)/Modules/Setup.dist |
| @if test -f Modules/Setup; then \ |
| echo "-----------------------------------------------"; \ |
| echo "Modules/Setup.dist is newer than Modules/Setup;"; \ |
| echo "check to make sure you have all the updates you"; \ |
| echo "need in your Modules/Setup file."; \ |
| echo "Usually, copying Modules/Setup.dist to Modules/Setup will work."; \ |
| echo "-----------------------------------------------"; \ |
| fi |
| |
| Modules/_testembed: Modules/_testembed.o $(LIBRARY) $(LDLIBRARY) $(PY3LIBRARY) |
| $(LINKCC) $(PY_LDFLAGS) $(LINKFORSHARED) -o $@ Modules/_testembed.o $(BLDLIBRARY) $(LIBS) $(MODLIBS) $(SYSLIBS) $(LDLAST) |
| |
| ############################################################################ |
| # Special rules for object files |
| |
| Modules/getbuildinfo.o: $(PARSER_OBJS) \ |
| $(OBJECT_OBJS) \ |
| $(PYTHON_OBJS) \ |
| $(MODULE_OBJS) \ |
| $(SIGNAL_OBJS) \ |
| $(MODOBJS) \ |
| $(srcdir)/Modules/getbuildinfo.c |
| $(CC) -c $(PY_CORE_CFLAGS) \ |
| -DSVNVERSION="\"`LC_ALL=C $(SVNVERSION)`\"" \ |
| -DHGVERSION="\"`LC_ALL=C $(HGVERSION)`\"" \ |
| -DHGTAG="\"`LC_ALL=C $(HGTAG)`\"" \ |
| -DHGBRANCH="\"`LC_ALL=C $(HGBRANCH)`\"" \ |
| -o $@ $(srcdir)/Modules/getbuildinfo.c |
| |
| Modules/getpath.o: $(srcdir)/Modules/getpath.c Makefile |
| $(CC) -c $(PY_CORE_CFLAGS) -DPYTHONPATH='"$(PYTHONPATH)"' \ |
| -DPREFIX='"$(prefix)"' \ |
| -DEXEC_PREFIX='"$(exec_prefix)"' \ |
| -DVERSION='"$(VERSION)"' \ |
| -DVPATH='"$(VPATH)"' \ |
| -o $@ $(srcdir)/Modules/getpath.c |
| |
| Modules/python.o: $(srcdir)/Modules/python.c |
| $(MAINCC) -c $(PY_CORE_CFLAGS) -o $@ $(srcdir)/Modules/python.c |
| |
| Python/dynload_shlib.o: $(srcdir)/Python/dynload_shlib.c Makefile |
| $(CC) -c $(PY_CORE_CFLAGS) \ |
| -DSOABI='"$(SOABI)"' \ |
| -o $@ $(srcdir)/Python/dynload_shlib.c |
| |
| Python/sysmodule.o: $(srcdir)/Python/sysmodule.c Makefile |
| $(CC) -c $(PY_CORE_CFLAGS) \ |
| -DABIFLAGS='"$(ABIFLAGS)"' \ |
| -o $@ $(srcdir)/Python/sysmodule.c |
| |
| $(IO_OBJS): $(IO_H) |
| |
| # Use a stamp file to prevent make -j invoking pgen twice |
| $(GRAMMAR_H) $(GRAMMAR_C): Parser/pgen.stamp |
| Parser/pgen.stamp: $(PGEN) $(GRAMMAR_INPUT) |
| -@$(INSTALL) -d Include |
| $(PGEN) $(GRAMMAR_INPUT) $(GRAMMAR_H) $(GRAMMAR_C) |
| -touch Parser/pgen.stamp |
| |
| $(PGEN): $(PGENOBJS) |
| $(CC) $(OPT) $(PY_LDFLAGS) $(PGENOBJS) $(LIBS) -o $(PGEN) |
| |
| Parser/grammar.o: $(srcdir)/Parser/grammar.c \ |
| $(srcdir)/Include/token.h \ |
| $(srcdir)/Include/grammar.h |
| Parser/metagrammar.o: $(srcdir)/Parser/metagrammar.c |
| |
| Parser/tokenizer_pgen.o: $(srcdir)/Parser/tokenizer.c |
| |
| Parser/pgenmain.o: $(srcdir)/Include/parsetok.h |
| |
| $(AST_H): $(AST_ASDL) $(ASDLGEN_FILES) |
| $(ASDLGEN) -h $(AST_H_DIR) $(AST_ASDL) |
| |
| $(AST_C): $(AST_ASDL) $(ASDLGEN_FILES) |
| $(ASDLGEN) -c $(AST_C_DIR) $(AST_ASDL) |
| |
| Python/compile.o Python/symtable.o Python/ast.o: $(GRAMMAR_H) $(AST_H) |
| |
| Python/getplatform.o: $(srcdir)/Python/getplatform.c |
| $(CC) -c $(PY_CORE_CFLAGS) -DPLATFORM='"$(MACHDEP)"' -o $@ $(srcdir)/Python/getplatform.c |
| |
| Python/importdl.o: $(srcdir)/Python/importdl.c |
| $(CC) -c $(PY_CORE_CFLAGS) -I$(DLINCLDIR) -o $@ $(srcdir)/Python/importdl.c |
| |
| Objects/unicodectype.o: $(srcdir)/Objects/unicodectype.c \ |
| $(srcdir)/Objects/unicodetype_db.h |
| |
| BYTESTR_DEPS = \ |
| $(srcdir)/Include/bytes_methods.h \ |
| $(srcdir)/Objects/stringlib/count.h \ |
| $(srcdir)/Objects/stringlib/ctype.h \ |
| $(srcdir)/Objects/stringlib/eq.h \ |
| $(srcdir)/Objects/stringlib/fastsearch.h \ |
| $(srcdir)/Objects/stringlib/find.h \ |
| $(srcdir)/Objects/stringlib/partition.h \ |
| $(srcdir)/Objects/stringlib/split.h \ |
| $(srcdir)/Objects/stringlib/stringdefs.h \ |
| $(srcdir)/Objects/stringlib/string_format.h \ |
| $(srcdir)/Objects/stringlib/transmogrify.h \ |
| $(srcdir)/Objects/stringlib/unicodedefs.h \ |
| $(srcdir)/Objects/stringlib/localeutil.h |
| |
| Objects/bytesobject.o: $(srcdir)/Objects/bytesobject.c $(BYTESTR_DEPS) |
| |
| Objects/bytearrayobject.o: $(srcdir)/Objects/bytearrayobject.c $(BYTESTR_DEPS) |
| |
| Objects/unicodeobject.o: $(srcdir)/Objects/unicodeobject.c \ |
| $(BYTESTR_DEPS) |
| |
| $(OPCODETARGETS_H): $(OPCODETARGETGEN_FILES) |
| $(OPCODETARGETGEN) $(OPCODETARGETS_H) |
| |
| Python/ceval.o: $(OPCODETARGETS_H) Python/ceval_gil.h |
| |
| Python/formatter_unicode.o: $(srcdir)/Python/formatter_unicode.c \ |
| $(BYTESTR_DEPS) \ |
| $(srcdir)/Objects/stringlib/formatter.h |
| |
| Objects/typeobject.o: $(srcdir)/Objects/typeslots.inc |
| $(srcdir)/Objects/typeslots.inc: $(srcdir)/Include/typeslots.h $(srcdir)/Objects/typeslots.py |
| $(PYTHON) $(srcdir)/Objects/typeslots.py < $(srcdir)/Include/typeslots.h > $(srcdir)/Objects/typeslots.inc |
| |
| ############################################################################ |
| # Header files |
| |
| PYTHON_HEADERS= \ |
| Include/Python-ast.h \ |
| Include/Python.h \ |
| Include/abstract.h \ |
| Include/asdl.h \ |
| Include/ast.h \ |
| Include/bltinmodule.h \ |
| Include/bitset.h \ |
| Include/boolobject.h \ |
| Include/bytes_methods.h \ |
| Include/bytearrayobject.h \ |
| Include/bytesobject.h \ |
| Include/cellobject.h \ |
| Include/ceval.h \ |
| Include/classobject.h \ |
| Include/code.h \ |
| Include/codecs.h \ |
| Include/compile.h \ |
| Include/complexobject.h \ |
| Include/descrobject.h \ |
| Include/dictobject.h \ |
| Include/dtoa.h \ |
| Include/dynamic_annotations.h \ |
| Include/enumobject.h \ |
| Include/errcode.h \ |
| Include/eval.h \ |
| Include/fileobject.h \ |
| Include/fileutils.h \ |
| Include/floatobject.h \ |
| Include/frameobject.h \ |
| Include/funcobject.h \ |
| Include/genobject.h \ |
| Include/import.h \ |
| Include/intrcheck.h \ |
| Include/iterobject.h \ |
| Include/listobject.h \ |
| Include/longintrepr.h \ |
| Include/longobject.h \ |
| Include/marshal.h \ |
| Include/memoryobject.h \ |
| Include/metagrammar.h \ |
| Include/methodobject.h \ |
| Include/modsupport.h \ |
| Include/moduleobject.h \ |
| Include/node.h \ |
| Include/object.h \ |
| Include/objimpl.h \ |
| Include/opcode.h \ |
| Include/osdefs.h \ |
| Include/parsetok.h \ |
| Include/patchlevel.h \ |
| Include/pgen.h \ |
| Include/pgenheaders.h \ |
| Include/pyarena.h \ |
| Include/pyatomic.h \ |
| Include/pycapsule.h \ |
| Include/pyctype.h \ |
| Include/pydebug.h \ |
| Include/pyerrors.h \ |
| Include/pyfpe.h \ |
| Include/pymath.h \ |
| Include/pygetopt.h \ |
| Include/pymem.h \ |
| Include/pyport.h \ |
| Include/pystate.h \ |
| Include/pystrcmp.h \ |
| Include/pystrtod.h \ |
| Include/pythonrun.h \ |
| Include/pythread.h \ |
| Include/pytime.h \ |
| Include/rangeobject.h \ |
| Include/setobject.h \ |
| Include/sliceobject.h \ |
| Include/structmember.h \ |
| Include/structseq.h \ |
| Include/symtable.h \ |
| Include/sysmodule.h \ |
| Include/traceback.h \ |
| Include/tupleobject.h \ |
| Include/ucnhash.h \ |
| Include/unicodeobject.h \ |
| Include/warnings.h \ |
| Include/weakrefobject.h \ |
| pyconfig.h \ |
| $(PARSER_HEADERS) |
| |
| $(LIBRARY_OBJS) $(MODOBJS) Modules/python.o: $(PYTHON_HEADERS) |
| |
| |
| ###################################################################### |
| |
| # Test the interpreter (twice, once without .pyc files, once with) |
| # In the past, we've had problems where bugs in the marshalling or |
| # elsewhere caused bytecode read from .pyc files to behave differently |
| # than bytecode generated directly from a .py source file. Sometimes |
| # the bytecode read from a .pyc file had the bug, somtimes the directly |
| # generated bytecode. This is sometimes a very shy bug needing a lot of |
| # sample data. |
| |
| TESTOPTS= -l $(EXTRATESTOPTS) |
| TESTPROG= $(srcdir)/Lib/test/regrtest.py |
| TESTPYTHON= $(RUNSHARED) ./$(BUILDPYTHON) -Wd -E -bb $(TESTPYTHONOPTS) |
| test: all platform |
| -find $(srcdir)/Lib -name '*.py[co]' -print | xargs rm -f |
| -$(TESTPYTHON) $(TESTPROG) $(TESTOPTS) |
| $(TESTPYTHON) $(TESTPROG) $(TESTOPTS) |
| |
| testall: all platform |
| -find $(srcdir)/Lib -name '*.py[co]' -print | xargs rm -f |
| $(TESTPYTHON) $(srcdir)/Lib/compileall.py |
| -find $(srcdir)/Lib -name '*.py[co]' -print | xargs rm -f |
| -$(TESTPYTHON) $(TESTPROG) -uall $(TESTOPTS) |
| $(TESTPYTHON) $(TESTPROG) -uall $(TESTOPTS) |
| |
| # Run the unitests for both architectures in a Universal build on OSX |
| # Must be run on an Intel box. |
| testuniversal: all platform |
| if [ `arch` != 'i386' ];then \ |
| echo "This can only be used on OSX/i386" ;\ |
| exit 1 ;\ |
| fi |
| -find $(srcdir)/Lib -name '*.py[co]' -print | xargs rm -f |
| -$(TESTPYTHON) $(TESTPROG) -uall $(TESTOPTS) |
| $(TESTPYTHON) $(TESTPROG) -uall $(TESTOPTS) |
| $(RUNSHARED) /usr/libexec/oah/translate ./$(BUILDPYTHON) -E $(TESTPROG) -uall $(TESTOPTS) |
| |
| |
| # Like testall, but with a single pass only |
| # run an optional script to include some information about the build environment |
| buildbottest: all platform |
| -@if which pybuildbot.identify >/dev/null 2>&1; then \ |
| pybuildbot.identify "CC='$(CC)'" "CXX='$(CXX)'"; \ |
| fi |
| $(TESTPYTHON) $(TESTPROG) -uall -rwW $(TESTOPTS) |
| |
| QUICKTESTOPTS= $(TESTOPTS) -x test_subprocess test_io test_lib2to3 \ |
| test_multibytecodec test_urllib2_localnet test_itertools \ |
| test_multiprocessing test_mailbox test_socket test_poll \ |
| test_select test_zipfile |
| quicktest: all platform |
| -find $(srcdir)/Lib -name '*.py[co]' -print | xargs rm -f |
| -$(TESTPYTHON) $(TESTPROG) $(QUICKTESTOPTS) |
| $(TESTPYTHON) $(TESTPROG) $(QUICKTESTOPTS) |
| |
| MEMTESTOPTS= $(QUICKTESTOPTS) -x test_dl test___all__ test_fork1 \ |
| test_longexp |
| memtest: all platform |
| -rm -f $(srcdir)/Lib/test/*.py[co] |
| -$(TESTPYTHON) $(TESTPROG) $(MEMTESTOPTS) |
| $(TESTPYTHON) $(TESTPROG) $(MEMTESTOPTS) |
| |
| install: altinstall bininstall |
| |
| altinstall: @FRAMEWORKALTINSTALLFIRST@ altbininstall libinstall inclinstall libainstall \ |
| sharedinstall oldsharedinstall maninstall @FRAMEWORKALTINSTALLLAST@ |
| |
| # Install shared libraries enabled by Setup |
| DESTDIRS= $(exec_prefix) $(LIBDIR) $(BINLIBDEST) $(DESTSHARED) |
| |
| oldsharedinstall: $(DESTSHARED) $(SHAREDMODS) |
| @for i in X $(SHAREDMODS); do \ |
| if test $$i != X; then \ |
| echo $(INSTALL_SHARED) $$i $(DESTSHARED)/`basename $$i`; \ |
| $(INSTALL_SHARED) $$i $(DESTDIR)$(DESTSHARED)/`basename $$i`; \ |
| fi; \ |
| done |
| |
| $(DESTSHARED): |
| @for i in $(DESTDIRS); \ |
| do \ |
| if test ! -d $(DESTDIR)$$i; then \ |
| echo "Creating directory $$i"; \ |
| $(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \ |
| else true; \ |
| fi; \ |
| done |
| |
| # Install the interpreter with $(VERSION) affixed |
| # This goes into $(exec_prefix) |
| altbininstall: $(BUILDPYTHON) |
| @for i in $(BINDIR) $(LIBDIR); \ |
| do \ |
| if test ! -d $(DESTDIR)$$i; then \ |
| echo "Creating directory $$i"; \ |
| $(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \ |
| else true; \ |
| fi; \ |
| done |
| $(INSTALL_PROGRAM) $(BUILDPYTHON) $(DESTDIR)$(BINDIR)/python$(LDVERSION)$(EXE) |
| -if test "$(VERSION)" != "$(LDVERSION)"; then \ |
| if test -f $(DESTDIR)$(BINDIR)/$(PYTHON)$(VERSION)$(EXE) -o -h $(DESTDIR)$(BINDIR)/$(PYTHON)$(VERSION)$(EXE); \ |
| then rm -f $(DESTDIR)$(BINDIR)/python$(VERSION)$(EXE); \ |
| fi; \ |
| (cd $(DESTDIR)$(BINDIR); $(LN) python$(LDVERSION)$(EXE) python$(VERSION)$(EXE)); \ |
| fi |
| if test -f $(LDLIBRARY); then \ |
| if test -n "$(DLLLIBRARY)" ; then \ |
| $(INSTALL_SHARED) $(DLLLIBRARY) $(DESTDIR)$(BINDIR); \ |
| else \ |
| $(INSTALL_SHARED) $(LDLIBRARY) $(DESTDIR)$(LIBDIR)/$(INSTSONAME); \ |
| if test $(LDLIBRARY) != $(INSTSONAME); then \ |
| (cd $(DESTDIR)$(LIBDIR); $(LN) -sf $(INSTSONAME) $(LDLIBRARY)) \ |
| fi \ |
| fi; \ |
| if test -n "$(PY3LIBRARY)"; then \ |
| $(INSTALL_SHARED) $(PY3LIBRARY) $(DESTDIR)$(LIBDIR)/$(PY3LIBRARY); \ |
| fi; \ |
| else true; \ |
| fi |
| |
| bininstall: altbininstall |
| -if test -f $(DESTDIR)$(BINDIR)/$(PYTHON)3$(EXE) -o -h $(DESTDIR)$(BINDIR)/$(PYTHON)3$(EXE); \ |
| then rm -f $(DESTDIR)$(BINDIR)/$(PYTHON)3$(EXE); \ |
| else true; \ |
| fi |
| (cd $(DESTDIR)$(BINDIR); $(LN) python$(VERSION)$(EXE) $(PYTHON)3$(EXE)) |
| -if test "$(VERSION)" != "$(LDVERSION)"; then \ |
| rm -f $(DESTDIR)$(BINDIR)/python$(VERSION)-config; \ |
| (cd $(DESTDIR)$(BINDIR); $(LN) -s python$(LDVERSION)-config python$(VERSION)-config); \ |
| rm -f $(DESTDIR)$(LIBPC)/python-$(LDVERSION).pc; \ |
| (cd $(DESTDIR)$(LIBPC); $(LN) -s python-$(VERSION).pc python-$(LDVERSION).pc); \ |
| fi |
| -rm -f $(DESTDIR)$(BINDIR)/python3-config |
| (cd $(DESTDIR)$(BINDIR); $(LN) -s python$(VERSION)-config python3-config) |
| -rm -f $(DESTDIR)$(LIBPC)/python3.pc |
| (cd $(DESTDIR)$(LIBPC); $(LN) -s python-$(VERSION).pc python3.pc) |
| -rm -f $(DESTDIR)$(BINDIR)/idle3 |
| (cd $(DESTDIR)$(BINDIR); $(LN) -s idle$(VERSION) idle3) |
| -rm -f $(DESTDIR)$(BINDIR)/pydoc3 |
| (cd $(DESTDIR)$(BINDIR); $(LN) -s pydoc$(VERSION) pydoc3) |
| -rm -f $(DESTDIR)$(BINDIR)/2to3 |
| (cd $(DESTDIR)$(BINDIR); $(LN) -s 2to3-$(VERSION) 2to3) |
| |
| # Install the manual page |
| maninstall: |
| @for i in $(MANDIR) $(MANDIR)/man1; \ |
| do \ |
| if test ! -d $(DESTDIR)$$i; then \ |
| echo "Creating directory $$i"; \ |
| $(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \ |
| else true; \ |
| fi; \ |
| done |
| $(INSTALL_DATA) $(srcdir)/Misc/python.man \ |
| $(DESTDIR)$(MANDIR)/man1/python$(VERSION).1 |
| |
| # Install the library |
| PLATDIR= plat-$(MACHDEP) |
| EXTRAPLATDIR= @EXTRAPLATDIR@ |
| MACHDEPS= $(PLATDIR) $(EXTRAPLATDIR) |
| XMLLIBSUBDIRS= xml xml/dom xml/etree xml/parsers xml/sax |
| LIBSUBDIRS= tkinter tkinter/test tkinter/test/test_tkinter \ |
| tkinter/test/test_ttk site-packages test \ |
| test/cjkencodings test/decimaltestdata test/xmltestdata test/subprocessdata \ |
| test/tracedmodules test/encoded_modules \ |
| concurrent concurrent/futures encodings \ |
| email email/mime email/test email/test/data \ |
| html json test/json_tests http dbm xmlrpc \ |
| sqlite3 sqlite3/test \ |
| logging csv wsgiref urllib \ |
| lib2to3 lib2to3/fixes lib2to3/pgen2 lib2to3/tests \ |
| lib2to3/tests/data lib2to3/tests/data/fixers lib2to3/tests/data/fixers/myfixes \ |
| ctypes ctypes/test ctypes/macholib idlelib idlelib/Icons \ |
| distutils distutils/command distutils/tests $(XMLLIBSUBDIRS) \ |
| importlib importlib/test importlib/test/builtin \ |
| importlib/test/extension importlib/test/frozen \ |
| importlib/test/import_ importlib/test/source \ |
| turtledemo \ |
| multiprocessing multiprocessing/dummy \ |
| unittest unittest/test \ |
| curses pydoc_data $(MACHDEPS) |
| libinstall: build_all $(srcdir)/Lib/$(PLATDIR) |
| @for i in $(SCRIPTDIR) $(LIBDEST); \ |
| do \ |
| if test ! -d $(DESTDIR)$$i; then \ |
| echo "Creating directory $$i"; \ |
| $(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \ |
| else true; \ |
| fi; \ |
| done |
| @for d in $(LIBSUBDIRS); \ |
| do \ |
| a=$(srcdir)/Lib/$$d; \ |
| if test ! -d $$a; then continue; else true; fi; \ |
| b=$(LIBDEST)/$$d; \ |
| if test ! -d $(DESTDIR)$$b; then \ |
| echo "Creating directory $$b"; \ |
| $(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$b; \ |
| else true; \ |
| fi; \ |
| done |
| @for i in $(srcdir)/Lib/*.py $(srcdir)/Lib/*.egg-info ; \ |
| do \ |
| if test -x $$i; then \ |
| $(INSTALL_SCRIPT) $$i $(DESTDIR)$(LIBDEST); \ |
| echo $(INSTALL_SCRIPT) $$i $(LIBDEST); \ |
| else \ |
| $(INSTALL_DATA) $$i $(DESTDIR)$(LIBDEST); \ |
| echo $(INSTALL_DATA) $$i $(LIBDEST); \ |
| fi; \ |
| done |
| @for d in $(LIBSUBDIRS); \ |
| do \ |
| a=$(srcdir)/Lib/$$d; \ |
| if test ! -d $$a; then continue; else true; fi; \ |
| if test `ls $$a | wc -l` -lt 1; then continue; fi; \ |
| b=$(LIBDEST)/$$d; \ |
| for i in $$a/*; \ |
| do \ |
| case $$i in \ |
| *CVS) ;; \ |
| *.py[co]) ;; \ |
| *.orig) ;; \ |
| *~) ;; \ |
| *) \ |
| if test -d $$i; then continue; fi; \ |
| if test -x $$i; then \ |
| echo $(INSTALL_SCRIPT) $$i $$b; \ |
| $(INSTALL_SCRIPT) $$i $(DESTDIR)$$b; \ |
| else \ |
| echo $(INSTALL_DATA) $$i $$b; \ |
| $(INSTALL_DATA) $$i $(DESTDIR)$$b; \ |
| fi;; \ |
| esac; \ |
| done; \ |
| done |
| $(INSTALL_DATA) $(srcdir)/LICENSE $(DESTDIR)$(LIBDEST)/LICENSE.txt |
| -PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \ |
| ./$(BUILDPYTHON) -Wi $(DESTDIR)$(LIBDEST)/compileall.py \ |
| -d $(LIBDEST) -f \ |
| -x 'bad_coding|badsyntax|site-packages|lib2to3/tests/data' \ |
| $(DESTDIR)$(LIBDEST) |
| -PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \ |
| ./$(BUILDPYTHON) -Wi -O $(DESTDIR)$(LIBDEST)/compileall.py \ |
| -d $(LIBDEST) -f \ |
| -x 'bad_coding|badsyntax|site-packages|lib2to3/tests/data' \ |
| $(DESTDIR)$(LIBDEST) |
| -PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \ |
| ./$(BUILDPYTHON) -Wi $(DESTDIR)$(LIBDEST)/compileall.py \ |
| -d $(LIBDEST)/site-packages -f \ |
| -x badsyntax $(DESTDIR)$(LIBDEST)/site-packages |
| -PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \ |
| ./$(BUILDPYTHON) -Wi -O $(DESTDIR)$(LIBDEST)/compileall.py \ |
| -d $(LIBDEST)/site-packages -f \ |
| -x badsyntax $(DESTDIR)$(LIBDEST)/site-packages |
| -PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \ |
| ./$(BUILDPYTHON) -Wi -c "import lib2to3.pygram, lib2to3.patcomp;lib2to3.patcomp.PatternCompiler()" |
| |
| # Create the PLATDIR source directory, if one wasn't distributed.. |
| $(srcdir)/Lib/$(PLATDIR): |
| mkdir $(srcdir)/Lib/$(PLATDIR) |
| cp $(srcdir)/Lib/plat-generic/regen $(srcdir)/Lib/$(PLATDIR)/regen |
| export PATH; PATH="`pwd`:$$PATH"; \ |
| export PYTHONPATH; PYTHONPATH="`pwd`/Lib"; \ |
| export DYLD_FRAMEWORK_PATH; DYLD_FRAMEWORK_PATH="`pwd`"; \ |
| export EXE; EXE="$(BUILDEXE)"; \ |
| cd $(srcdir)/Lib/$(PLATDIR); $(RUNSHARED) ./regen |
| |
| python-config: $(srcdir)/Misc/python-config.in |
| # Substitution happens here, as the completely-expanded BINDIR |
| # is not available in configure |
| sed -e "s,@EXENAME@,$(BINDIR)/python$(LDVERSION)$(EXE)," < $(srcdir)/Misc/python-config.in >python-config |
| |
| # Install the include files |
| INCLDIRSTOMAKE=$(INCLUDEDIR) $(CONFINCLUDEDIR) $(INCLUDEPY) $(CONFINCLUDEPY) |
| inclinstall: |
| @for i in $(INCLDIRSTOMAKE); \ |
| do \ |
| if test ! -d $(DESTDIR)$$i; then \ |
| echo "Creating directory $$i"; \ |
| $(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \ |
| else true; \ |
| fi; \ |
| done |
| @for i in $(srcdir)/Include/*.h; \ |
| do \ |
| echo $(INSTALL_DATA) $$i $(INCLUDEPY); \ |
| $(INSTALL_DATA) $$i $(DESTDIR)$(INCLUDEPY); \ |
| done |
| $(INSTALL_DATA) pyconfig.h $(DESTDIR)$(CONFINCLUDEPY)/pyconfig.h |
| |
| # Install the library and miscellaneous stuff needed for extending/embedding |
| # This goes into $(exec_prefix) |
| LIBPL= $(LIBDEST)/config-$(LDVERSION) |
| |
| # pkgconfig directory |
| LIBPC= $(LIBDIR)/pkgconfig |
| |
| libainstall: all python-config |
| @for i in $(LIBDIR) $(LIBPL) $(LIBPC); \ |
| do \ |
| if test ! -d $(DESTDIR)$$i; then \ |
| echo "Creating directory $$i"; \ |
| $(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \ |
| else true; \ |
| fi; \ |
| done |
| @if test -d $(LIBRARY); then :; else \ |
| if test "$(PYTHONFRAMEWORKDIR)" = no-framework; then \ |
| if test "$(SO)" = .dll; then \ |
| $(INSTALL_DATA) $(LDLIBRARY) $(DESTDIR)$(LIBPL) ; \ |
| else \ |
| $(INSTALL_DATA) $(LIBRARY) $(DESTDIR)$(LIBPL)/$(LIBRARY) ; \ |
| $(RANLIB) $(DESTDIR)$(LIBPL)/$(LIBRARY) ; \ |
| fi; \ |
| else \ |
| echo Skip install of $(LIBRARY) - use make frameworkinstall; \ |
| fi; \ |
| fi |
| $(INSTALL_DATA) Modules/config.c $(DESTDIR)$(LIBPL)/config.c |
| $(INSTALL_DATA) Modules/python.o $(DESTDIR)$(LIBPL)/python.o |
| $(INSTALL_DATA) $(srcdir)/Modules/config.c.in $(DESTDIR)$(LIBPL)/config.c.in |
| $(INSTALL_DATA) Makefile $(DESTDIR)$(LIBPL)/Makefile |
| $(INSTALL_DATA) Modules/Setup $(DESTDIR)$(LIBPL)/Setup |
| $(INSTALL_DATA) Modules/Setup.local $(DESTDIR)$(LIBPL)/Setup.local |
| $(INSTALL_DATA) Modules/Setup.config $(DESTDIR)$(LIBPL)/Setup.config |
| $(INSTALL_DATA) Misc/python.pc $(DESTDIR)$(LIBPC)/python-$(VERSION).pc |
| $(INSTALL_SCRIPT) $(srcdir)/Modules/makesetup $(DESTDIR)$(LIBPL)/makesetup |
| $(INSTALL_SCRIPT) $(srcdir)/install-sh $(DESTDIR)$(LIBPL)/install-sh |
| $(INSTALL_SCRIPT) python-config $(DESTDIR)$(BINDIR)/python$(LDVERSION)-config |
| rm python-config |
| @if [ -s Modules/python.exp -a \ |
| "`echo $(MACHDEP) | sed 's/^\(...\).*/\1/'`" = "aix" ]; then \ |
| echo; echo "Installing support files for building shared extension modules on AIX:"; \ |
| $(INSTALL_DATA) Modules/python.exp \ |
| $(DESTDIR)$(LIBPL)/python.exp; \ |
| echo; echo "$(LIBPL)/python.exp"; \ |
| $(INSTALL_SCRIPT) $(srcdir)/Modules/makexp_aix \ |
| $(DESTDIR)$(LIBPL)/makexp_aix; \ |
| echo "$(LIBPL)/makexp_aix"; \ |
| $(INSTALL_SCRIPT) $(srcdir)/Modules/ld_so_aix \ |
| $(DESTDIR)$(LIBPL)/ld_so_aix; \ |
| echo "$(LIBPL)/ld_so_aix"; \ |
| echo; echo "See Misc/AIX-NOTES for details."; \ |
| else true; \ |
| fi |
| |
| # Install the dynamically loadable modules |
| # This goes into $(exec_prefix) |
| sharedinstall: sharedmods |
| $(RUNSHARED) ./$(BUILDPYTHON) -E $(srcdir)/setup.py install \ |
| --prefix=$(prefix) \ |
| --install-scripts=$(BINDIR) \ |
| --install-platlib=$(DESTSHARED) \ |
| --root=$(DESTDIR)/ |
| |
| # Here are a couple of targets for MacOSX again, to install a full |
| # framework-based Python. frameworkinstall installs everything, the |
| # subtargets install specific parts. Much of the actual work is offloaded to |
| # the Makefile in Mac |
| # |
| # |
| # This target is here for backward compatiblity, previous versions of Python |
| # hadn't integrated framework installation in the normal install process. |
| frameworkinstall: install |
| |
| # On install, we re-make the framework |
| # structure in the install location, /Library/Frameworks/ or the argument to |
| # --enable-framework. If --enable-framework has been specified then we have |
| # automatically set prefix to the location deep down in the framework, so we |
| # only have to cater for the structural bits of the framework. |
| |
| frameworkinstallframework: frameworkinstallstructure install frameworkinstallmaclib |
| |
| frameworkinstallstructure: $(LDLIBRARY) |
| @if test "$(PYTHONFRAMEWORKDIR)" = no-framework; then \ |
| echo Not configured with --enable-framework; \ |
| exit 1; \ |
| else true; \ |
| fi |
| @for i in $(prefix)/Resources/English.lproj $(prefix)/lib; do\ |
| if test ! -d $(DESTDIR)$$i; then \ |
| echo "Creating directory $(DESTDIR)$$i"; \ |
| $(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \ |
| else true; \ |
| fi; \ |
| done |
| $(LN) -fsn include/python$(LDVERSION) $(DESTDIR)$(prefix)/Headers |
| sed 's/%VERSION%/'"`$(RUNSHARED) ./$(BUILDPYTHON) -c 'import platform; print(platform.python_version())'`"'/g' < $(RESSRCDIR)/Info.plist > $(DESTDIR)$(prefix)/Resources/Info.plist |
| $(LN) -fsn $(VERSION) $(DESTDIR)$(PYTHONFRAMEWORKINSTALLDIR)/Versions/Current |
| $(LN) -fsn Versions/Current/$(PYTHONFRAMEWORK) $(DESTDIR)$(PYTHONFRAMEWORKINSTALLDIR)/$(PYTHONFRAMEWORK) |
| $(LN) -fsn Versions/Current/Headers $(DESTDIR)$(PYTHONFRAMEWORKINSTALLDIR)/Headers |
| $(LN) -fsn Versions/Current/Resources $(DESTDIR)$(PYTHONFRAMEWORKINSTALLDIR)/Resources |
| $(INSTALL_SHARED) $(LDLIBRARY) $(DESTDIR)$(PYTHONFRAMEWORKPREFIX)/$(LDLIBRARY) |
| |
| # This installs Mac/Lib into the framework |
| # Install a number of symlinks to keep software that expects a normal unix |
| # install (which includes python-config) happy. |
| frameworkinstallmaclib: |
| ln -fs "../../../$(PYTHONFRAMEWORK)" "$(DESTDIR)$(prefix)/lib/python$(VERSION)/config-$(LDVERSION)/libpython$(VERSION).a" |
| ln -fs "../../../$(PYTHONFRAMEWORK)" "$(DESTDIR)$(prefix)/lib/python$(VERSION)/config-$(LDVERSION)/libpython$(VERSION).dylib" |
| ln -fs "../$(PYTHONFRAMEWORK)" "$(DESTDIR)$(prefix)/lib/libpython$(VERSION).dylib" |
| |
| # This installs the IDE, the Launcher and other apps into /Applications |
| frameworkinstallapps: |
| cd Mac && $(MAKE) installapps DESTDIR="$(DESTDIR)" |
| |
| # This install the unix python and pythonw tools in /usr/local/bin |
| frameworkinstallunixtools: |
| cd Mac && $(MAKE) installunixtools DESTDIR="$(DESTDIR)" |
| |
| frameworkaltinstallunixtools: |
| cd Mac && $(MAKE) altinstallunixtools DESTDIR="$(DESTDIR)" |
| |
| # This installs the Tools into the applications directory. |
| # It is not part of a normal frameworkinstall |
| frameworkinstallextras: |
| cd Mac && $(MAKE) installextras DESTDIR="$(DESTDIR)" |
| |
| # This installs a few of the useful scripts in Tools/scripts |
| scriptsinstall: |
| SRCDIR=$(srcdir) $(RUNSHARED) \ |
| ./$(BUILDPYTHON) $(srcdir)/Tools/scripts/setup.py install \ |
| --prefix=$(prefix) \ |
| --install-scripts=$(BINDIR) \ |
| --root=$(DESTDIR)/ |
| |
| # Build the toplevel Makefile |
| Makefile.pre: Makefile.pre.in config.status |
| CONFIG_FILES=Makefile.pre CONFIG_HEADERS= $(SHELL) config.status |
| $(MAKE) -f Makefile.pre Makefile |
| |
| # Run the configure script. |
| config.status: $(srcdir)/configure |
| $(SHELL) $(srcdir)/configure $(CONFIG_ARGS) |
| |
| .PRECIOUS: config.status $(BUILDPYTHON) Makefile Makefile.pre |
| |
| # Some make's put the object file in the current directory |
| .c.o: |
| $(CC) -c $(PY_CORE_CFLAGS) -o $@ $< |
| |
| # Run reindent on the library |
| reindent: |
| ./$(BUILDPYTHON) $(srcdir)/Tools/scripts/reindent.py -r $(srcdir)/Lib |
| |
| # Rerun configure with the same options as it was run last time, |
| # provided the config.status script exists |
| recheck: |
| $(SHELL) config.status --recheck |
| $(SHELL) config.status |
| |
| # Rebuild the configure script from configure.in; also rebuild pyconfig.h.in |
| autoconf: |
| (cd $(srcdir); autoconf -Wall) |
| (cd $(srcdir); autoheader -Wall) |
| |
| # Create a tags file for vi |
| tags:: |
| cd $(srcdir); \ |
| ctags -w -t Include/*.h; \ |
| for i in $(SRCDIRS); do ctags -w -t -a $$i/*.[ch]; \ |
| done; \ |
| sort -o tags tags |
| |
| # Create a tags file for GNU Emacs |
| TAGS:: |
| cd $(srcdir); \ |
| etags Include/*.h; \ |
| for i in $(SRCDIRS); do etags -a $$i/*.[ch]; done |
| |
| # Sanitation targets -- clean leaves libraries, executables and tags |
| # files, which clobber removes as well |
| pycremoval: |
| -find $(srcdir) -name '*.py[co]' -exec rm -f {} ';' |
| -find $(srcdir) -name '__pycache__' -exec rmdir {} '+' |
| |
| rmtestturds: |
| -rm -f *BAD *GOOD *SKIPPED |
| -rm -rf OUT |
| -rm -f *.TXT |
| -rm -f *.txt |
| -rm -f gb-18030-2000.xml |
| |
| docclean: |
| -rm -rf Doc/build |
| -rm -rf Doc/tools/sphinx Doc/tools/pygments Doc/tools/docutils |
| |
| clean: pycremoval |
| find . -name '*.[oa]' -exec rm -f {} ';' |
| find . -name '*.s[ol]' -exec rm -f {} ';' |
| find . -name '*.so.[0-9]*.[0-9]*' -exec rm -f {} ';' |
| find build -name 'fficonfig.h' -exec rm -f {} ';' || true |
| find build -name 'fficonfig.py' -exec rm -f {} ';' || true |
| -rm -f Lib/lib2to3/*Grammar*.pickle |
| |
| profile-removal: |
| find . -name '*.gc??' -exec rm -f {} ';' |
| |
| clobber: clean profile-removal |
| -rm -f $(BUILDPYTHON) $(PGEN) $(LIBRARY) $(LDLIBRARY) $(DLLLIBRARY) \ |
| tags TAGS Parser/pgen.stamp \ |
| config.cache config.log pyconfig.h Modules/config.c |
| -rm -rf build platform |
| -rm -rf $(PYTHONFRAMEWORKDIR) |
| |
| # Make things extra clean, before making a distribution: |
| # remove all generated files, even Makefile[.pre] |
| # Keep configure and Python-ast.[ch], it's possible they can't be generated |
| distclean: clobber |
| for file in Lib/test/data/* ; do \ |
| if test "$$file" != "Lib/test/data/README"; then rm "$$file"; fi; \ |
| done |
| -rm -f core Makefile Makefile.pre config.status \ |
| Modules/Setup Modules/Setup.local Modules/Setup.config \ |
| Modules/ld_so_aix Modules/python.exp Misc/python.pc |
| -rm -f python*-gdb.py |
| -rm -f pybuilddir.txt |
| find $(srcdir) '(' -name '*.fdc' -o -name '*~' \ |
| -o -name '[@,#]*' -o -name '*.old' \ |
| -o -name '*.orig' -o -name '*.rej' \ |
| -o -name '*.bak' ')' \ |
| -exec rm -f {} ';' |
| |
| # Check for smelly exported symbols (not starting with Py/_Py) |
| smelly: all |
| nm -p $(LIBRARY) | \ |
| sed -n "/ [TDB] /s/.* //p" | grep -v "^_*Py" | sort -u; \ |
| |
| # Find files with funny names |
| funny: |
| find $(DISTDIRS) \ |
| -name .svn -prune \ |
| -o -type d \ |
| -o -name '*.[chs]' \ |
| -o -name '*.py' \ |
| -o -name '*.pyw' \ |
| -o -name '*.dat' \ |
| -o -name '*.el' \ |
| -o -name '*.fd' \ |
| -o -name '*.in' \ |
| -o -name '*.gif' \ |
| -o -name '*.txt' \ |
| -o -name '*.xml' \ |
| -o -name '*.xbm' \ |
| -o -name '*.xpm' \ |
| -o -name '*.uue' \ |
| -o -name '*.decTest' \ |
| -o -name '*.tmCommand' \ |
| -o -name '*.tmSnippet' \ |
| -o -name 'Setup' \ |
| -o -name 'Setup.*' \ |
| -o -name regen \ |
| -o -name README \ |
| -o -name NEWS \ |
| -o -name HISTORY \ |
| -o -name Makefile \ |
| -o -name ChangeLog \ |
| -o -name .hgignore \ |
| -o -name .bzrignore \ |
| -o -name MANIFEST \ |
| -o -print |
| |
| # Perform some verification checks on any modified files. |
| patchcheck: |
| $(RUNSHARED) ./$(BUILDPYTHON) $(srcdir)/Tools/scripts/patchcheck.py |
| |
| # Dependencies |
| |
| Python/thread.o: @THREADHEADERS@ |
| |
| # Declare targets that aren't real files |
| .PHONY: all build_all sharedmods oldsharedmods test quicktest memtest |
| .PHONY: install altinstall oldsharedinstall bininstall altbininstall |
| .PHONY: maninstall libinstall inclinstall libainstall sharedinstall |
| .PHONY: frameworkinstall frameworkinstallframework frameworkinstallstructure |
| .PHONY: frameworkinstallmaclib frameworkinstallapps frameworkinstallunixtools |
| .PHONY: frameworkaltinstallunixtools recheck autoconf clean clobber distclean |
| .PHONY: smelly funny patchcheck |
| .PHONY: gdbhooks |
| |
| # IF YOU PUT ANYTHING HERE IT WILL GO AWAY |
| # Local Variables: |
| # mode: makefile |
| # End: |