| :mod:`http.server` --- HTTP servers |
| =================================== |
| |
| .. module:: http.server |
| :synopsis: HTTP server and request handlers. |
| |
| **Source code:** :source:`Lib/http/server.py` |
| |
| .. index:: |
| pair: WWW; server |
| pair: HTTP; protocol |
| single: URL |
| single: httpd |
| |
| -------------- |
| |
| This module defines classes for implementing HTTP servers (Web servers). |
| |
| One class, :class:`HTTPServer`, is a :class:`socketserver.TCPServer` subclass. |
| It creates and listens at the HTTP socket, dispatching the requests to a |
| handler. Code to create and run the server looks like this:: |
| |
| def run(server_class=HTTPServer, handler_class=BaseHTTPRequestHandler): |
| server_address = ('', 8000) |
| httpd = server_class(server_address, handler_class) |
| httpd.serve_forever() |
| |
| |
| .. class:: HTTPServer(server_address, RequestHandlerClass) |
| |
| This class builds on the :class:`~socketserver.TCPServer` class by storing |
| the server address as instance variables named :attr:`server_name` and |
| :attr:`server_port`. The server is accessible by the handler, typically |
| through the handler's :attr:`server` instance variable. |
| |
| |
| The :class:`HTTPServer` must be given a *RequestHandlerClass* on instantiation, |
| of which this module provides three different variants: |
| |
| .. class:: BaseHTTPRequestHandler(request, client_address, server) |
| |
| This class is used to handle the HTTP requests that arrive at the server. By |
| itself, it cannot respond to any actual HTTP requests; it must be subclassed |
| to handle each request method (e.g. GET or POST). |
| :class:`BaseHTTPRequestHandler` provides a number of class and instance |
| variables, and methods for use by subclasses. |
| |
| The handler will parse the request and the headers, then call a method |
| specific to the request type. The method name is constructed from the |
| request. For example, for the request method ``SPAM``, the :meth:`do_SPAM` |
| method will be called with no arguments. All of the relevant information is |
| stored in instance variables of the handler. Subclasses should not need to |
| override or extend the :meth:`__init__` method. |
| |
| :class:`BaseHTTPRequestHandler` has the following instance variables: |
| |
| .. attribute:: client_address |
| |
| Contains a tuple of the form ``(host, port)`` referring to the client's |
| address. |
| |
| .. attribute:: server |
| |
| Contains the server instance. |
| |
| .. attribute:: close_connection |
| |
| Boolean that should be set before :meth:`handle_one_request` returns, |
| indicating if another request may be expected, or if the connection should |
| be shut down. |
| |
| .. attribute:: requestline |
| |
| Contains the string representation of the HTTP request line. The |
| terminating CRLF is stripped. This attribute should be set by |
| :meth:`handle_one_request`. If no valid request line was processed, it |
| should be set to the empty string. |
| |
| .. attribute:: command |
| |
| Contains the command (request type). For example, ``'GET'``. |
| |
| .. attribute:: path |
| |
| Contains the request path. |
| |
| .. attribute:: request_version |
| |
| Contains the version string from the request. For example, ``'HTTP/1.0'``. |
| |
| .. attribute:: headers |
| |
| Holds an instance of the class specified by the :attr:`MessageClass` class |
| variable. This instance parses and manages the headers in the HTTP |
| request. The :func:`~http.client.parse_headers` function from |
| :mod:`http.client` is used to parse the headers and it requires that the |
| HTTP request provide a valid :rfc:`2822` style header. |
| |
| .. attribute:: rfile |
| |
| An :class:`io.BufferedIOBase` input stream, ready to read from |
| the start of the optional input data. |
| |
| .. attribute:: wfile |
| |
| Contains the output stream for writing a response back to the |
| client. Proper adherence to the HTTP protocol must be used when writing to |
| this stream. |
| |
| .. versionchanged:: 3.6 |
| This is an :class:`io.BufferedIOBase` stream. |
| |
| :class:`BaseHTTPRequestHandler` has the following attributes: |
| |
| .. attribute:: server_version |
| |
| Specifies the server software version. You may want to override this. The |
| format is multiple whitespace-separated strings, where each string is of |
| the form name[/version]. For example, ``'BaseHTTP/0.2'``. |
| |
| .. attribute:: sys_version |
| |
| Contains the Python system version, in a form usable by the |
| :attr:`version_string` method and the :attr:`server_version` class |
| variable. For example, ``'Python/1.4'``. |
| |
| .. attribute:: error_message_format |
| |
| Specifies a format string that should be used by :meth:`send_error` method |
| for building an error response to the client. The string is filled by |
| default with variables from :attr:`responses` based on the status code |
| that passed to :meth:`send_error`. |
| |
| .. attribute:: error_content_type |
| |
| Specifies the Content-Type HTTP header of error responses sent to the |
| client. The default value is ``'text/html'``. |
| |
| .. attribute:: protocol_version |
| |
| This specifies the HTTP protocol version used in responses. If set to |
| ``'HTTP/1.1'``, the server will permit HTTP persistent connections; |
| however, your server *must* then include an accurate ``Content-Length`` |
| header (using :meth:`send_header`) in all of its responses to clients. |
| For backwards compatibility, the setting defaults to ``'HTTP/1.0'``. |
| |
| .. attribute:: MessageClass |
| |
| Specifies an :class:`email.message.Message`\ -like class to parse HTTP |
| headers. Typically, this is not overridden, and it defaults to |
| :class:`http.client.HTTPMessage`. |
| |
| .. attribute:: responses |
| |
| This attribute contains a mapping of error code integers to two-element tuples |
| containing a short and long message. For example, ``{code: (shortmessage, |
| longmessage)}``. The *shortmessage* is usually used as the *message* key in an |
| error response, and *longmessage* as the *explain* key. It is used by |
| :meth:`send_response_only` and :meth:`send_error` methods. |
| |
| A :class:`BaseHTTPRequestHandler` instance has the following methods: |
| |
| .. method:: handle() |
| |
| Calls :meth:`handle_one_request` once (or, if persistent connections are |
| enabled, multiple times) to handle incoming HTTP requests. You should |
| never need to override it; instead, implement appropriate :meth:`do_\*` |
| methods. |
| |
| .. method:: handle_one_request() |
| |
| This method will parse and dispatch the request to the appropriate |
| :meth:`do_\*` method. You should never need to override it. |
| |
| .. method:: handle_expect_100() |
| |
| When a HTTP/1.1 compliant server receives an ``Expect: 100-continue`` |
| request header it responds back with a ``100 Continue`` followed by ``200 |
| OK`` headers. |
| This method can be overridden to raise an error if the server does not |
| want the client to continue. For e.g. server can chose to send ``417 |
| Expectation Failed`` as a response header and ``return False``. |
| |
| .. versionadded:: 3.2 |
| |
| .. method:: send_error(code, message=None, explain=None) |
| |
| Sends and logs a complete error reply to the client. The numeric *code* |
| specifies the HTTP error code, with *message* as an optional, short, human |
| readable description of the error. The *explain* argument can be used to |
| provide more detailed information about the error; it will be formatted |
| using the :attr:`error_message_format` attribute and emitted, after |
| a complete set of headers, as the response body. The :attr:`responses` |
| attribute holds the default values for *message* and *explain* that |
| will be used if no value is provided; for unknown codes the default value |
| for both is the string ``???``. The body will be empty if the method is |
| HEAD or the response code is one of the following: ``1xx``, |
| ``204 No Content``, ``205 Reset Content``, ``304 Not Modified``. |
| |
| .. versionchanged:: 3.4 |
| The error response includes a Content-Length header. |
| Added the *explain* argument. |
| |
| .. method:: send_response(code, message=None) |
| |
| Adds a response header to the headers buffer and logs the accepted |
| request. The HTTP response line is written to the internal buffer, |
| followed by *Server* and *Date* headers. The values for these two headers |
| are picked up from the :meth:`version_string` and |
| :meth:`date_time_string` methods, respectively. If the server does not |
| intend to send any other headers using the :meth:`send_header` method, |
| then :meth:`send_response` should be followed by an :meth:`end_headers` |
| call. |
| |
| .. versionchanged:: 3.3 |
| Headers are stored to an internal buffer and :meth:`end_headers` |
| needs to be called explicitly. |
| |
| .. method:: send_header(keyword, value) |
| |
| Adds the HTTP header to an internal buffer which will be written to the |
| output stream when either :meth:`end_headers` or :meth:`flush_headers` is |
| invoked. *keyword* should specify the header keyword, with *value* |
| specifying its value. Note that, after the send_header calls are done, |
| :meth:`end_headers` MUST BE called in order to complete the operation. |
| |
| .. versionchanged:: 3.2 |
| Headers are stored in an internal buffer. |
| |
| .. method:: send_response_only(code, message=None) |
| |
| Sends the response header only, used for the purposes when ``100 |
| Continue`` response is sent by the server to the client. The headers not |
| buffered and sent directly the output stream.If the *message* is not |
| specified, the HTTP message corresponding the response *code* is sent. |
| |
| .. versionadded:: 3.2 |
| |
| .. method:: end_headers() |
| |
| Adds a blank line |
| (indicating the end of the HTTP headers in the response) |
| to the headers buffer and calls :meth:`flush_headers()`. |
| |
| .. versionchanged:: 3.2 |
| The buffered headers are written to the output stream. |
| |
| .. method:: flush_headers() |
| |
| Finally send the headers to the output stream and flush the internal |
| headers buffer. |
| |
| .. versionadded:: 3.3 |
| |
| .. method:: log_request(code='-', size='-') |
| |
| Logs an accepted (successful) request. *code* should specify the numeric |
| HTTP code associated with the response. If a size of the response is |
| available, then it should be passed as the *size* parameter. |
| |
| .. method:: log_error(...) |
| |
| Logs an error when a request cannot be fulfilled. By default, it passes |
| the message to :meth:`log_message`, so it takes the same arguments |
| (*format* and additional values). |
| |
| |
| .. method:: log_message(format, ...) |
| |
| Logs an arbitrary message to ``sys.stderr``. This is typically overridden |
| to create custom error logging mechanisms. The *format* argument is a |
| standard printf-style format string, where the additional arguments to |
| :meth:`log_message` are applied as inputs to the formatting. The client |
| ip address and current date and time are prefixed to every message logged. |
| |
| .. method:: version_string() |
| |
| Returns the server software's version string. This is a combination of the |
| :attr:`server_version` and :attr:`sys_version` attributes. |
| |
| .. method:: date_time_string(timestamp=None) |
| |
| Returns the date and time given by *timestamp* (which must be None or in |
| the format returned by :func:`time.time`), formatted for a message |
| header. If *timestamp* is omitted, it uses the current date and time. |
| |
| The result looks like ``'Sun, 06 Nov 1994 08:49:37 GMT'``. |
| |
| .. method:: log_date_time_string() |
| |
| Returns the current date and time, formatted for logging. |
| |
| .. method:: address_string() |
| |
| Returns the client address. |
| |
| .. versionchanged:: 3.3 |
| Previously, a name lookup was performed. To avoid name resolution |
| delays, it now always returns the IP address. |
| |
| |
| .. class:: SimpleHTTPRequestHandler(request, client_address, server) |
| |
| This class serves files from the current directory and below, directly |
| mapping the directory structure to HTTP requests. |
| |
| A lot of the work, such as parsing the request, is done by the base class |
| :class:`BaseHTTPRequestHandler`. This class implements the :func:`do_GET` |
| and :func:`do_HEAD` functions. |
| |
| The following are defined as class-level attributes of |
| :class:`SimpleHTTPRequestHandler`: |
| |
| .. attribute:: server_version |
| |
| This will be ``"SimpleHTTP/" + __version__``, where ``__version__`` is |
| defined at the module level. |
| |
| .. attribute:: extensions_map |
| |
| A dictionary mapping suffixes into MIME types. The default is |
| signified by an empty string, and is considered to be |
| ``application/octet-stream``. The mapping is used case-insensitively, |
| and so should contain only lower-cased keys. |
| |
| The :class:`SimpleHTTPRequestHandler` class defines the following methods: |
| |
| .. method:: do_HEAD() |
| |
| This method serves the ``'HEAD'`` request type: it sends the headers it |
| would send for the equivalent ``GET`` request. See the :meth:`do_GET` |
| method for a more complete explanation of the possible headers. |
| |
| .. method:: do_GET() |
| |
| The request is mapped to a local file by interpreting the request as a |
| path relative to the current working directory. |
| |
| If the request was mapped to a directory, the directory is checked for a |
| file named ``index.html`` or ``index.htm`` (in that order). If found, the |
| file's contents are returned; otherwise a directory listing is generated |
| by calling the :meth:`list_directory` method. This method uses |
| :func:`os.listdir` to scan the directory, and returns a ``404`` error |
| response if the :func:`~os.listdir` fails. |
| |
| If the request was mapped to a file, it is opened and the contents are |
| returned. Any :exc:`OSError` exception in opening the requested file is |
| mapped to a ``404``, ``'File not found'`` error. Otherwise, the content |
| type is guessed by calling the :meth:`guess_type` method, which in turn |
| uses the *extensions_map* variable. |
| |
| A ``'Content-type:'`` header with the guessed content type is output, |
| followed by a ``'Content-Length:'`` header with the file's size and a |
| ``'Last-Modified:'`` header with the file's modification time. |
| |
| Then follows a blank line signifying the end of the headers, and then the |
| contents of the file are output. If the file's MIME type starts with |
| ``text/`` the file is opened in text mode; otherwise binary mode is used. |
| |
| For example usage, see the implementation of the :func:`test` function |
| invocation in the :mod:`http.server` module. |
| |
| |
| The :class:`SimpleHTTPRequestHandler` class can be used in the following |
| manner in order to create a very basic webserver serving files relative to |
| the current directory:: |
| |
| import http.server |
| import socketserver |
| |
| PORT = 8000 |
| |
| Handler = http.server.SimpleHTTPRequestHandler |
| |
| with socketserver.TCPServer(("", PORT), Handler) as httpd: |
| print("serving at port", PORT) |
| httpd.serve_forever() |
| |
| .. _http-server-cli: |
| |
| :mod:`http.server` can also be invoked directly using the :option:`-m` |
| switch of the interpreter with a ``port number`` argument. Similar to |
| the previous example, this serves files relative to the current directory:: |
| |
| python -m http.server 8000 |
| |
| By default, server binds itself to all interfaces. The option ``-b/--bind`` |
| specifies a specific address to which it should bind. For example, the |
| following command causes the server to bind to localhost only:: |
| |
| python -m http.server 8000 --bind 127.0.0.1 |
| |
| .. versionadded:: 3.4 |
| ``--bind`` argument was introduced. |
| |
| |
| .. class:: CGIHTTPRequestHandler(request, client_address, server) |
| |
| This class is used to serve either files or output of CGI scripts from the |
| current directory and below. Note that mapping HTTP hierarchic structure to |
| local directory structure is exactly as in :class:`SimpleHTTPRequestHandler`. |
| |
| .. note:: |
| |
| CGI scripts run by the :class:`CGIHTTPRequestHandler` class cannot execute |
| redirects (HTTP code 302), because code 200 (script output follows) is |
| sent prior to execution of the CGI script. This pre-empts the status |
| code. |
| |
| The class will however, run the CGI script, instead of serving it as a file, |
| if it guesses it to be a CGI script. Only directory-based CGI are used --- |
| the other common server configuration is to treat special extensions as |
| denoting CGI scripts. |
| |
| The :func:`do_GET` and :func:`do_HEAD` functions are modified to run CGI scripts |
| and serve the output, instead of serving files, if the request leads to |
| somewhere below the ``cgi_directories`` path. |
| |
| The :class:`CGIHTTPRequestHandler` defines the following data member: |
| |
| .. attribute:: cgi_directories |
| |
| This defaults to ``['/cgi-bin', '/htbin']`` and describes directories to |
| treat as containing CGI scripts. |
| |
| The :class:`CGIHTTPRequestHandler` defines the following method: |
| |
| .. method:: do_POST() |
| |
| This method serves the ``'POST'`` request type, only allowed for CGI |
| scripts. Error 501, "Can only POST to CGI scripts", is output when trying |
| to POST to a non-CGI url. |
| |
| Note that CGI scripts will be run with UID of user nobody, for security |
| reasons. Problems with the CGI script will be translated to error 403. |
| |
| :class:`CGIHTTPRequestHandler` can be enabled in the command line by passing |
| the ``--cgi`` option:: |
| |
| python -m http.server --cgi 8000 |
| |