| /* Array object implementation */ |
| |
| /* An array is a uniform list -- all items have the same type. |
| The item type is restricted to simple C types like int or float */ |
| |
| #define PY_SSIZE_T_CLEAN |
| #include "Python.h" |
| #include "structmember.h" |
| |
| #ifdef STDC_HEADERS |
| #include <stddef.h> |
| #else /* !STDC_HEADERS */ |
| #ifndef DONT_HAVE_SYS_TYPES_H |
| #include <sys/types.h> /* For size_t */ |
| #endif /* DONT_HAVE_SYS_TYPES_H */ |
| #endif /* !STDC_HEADERS */ |
| |
| struct arrayobject; /* Forward */ |
| |
| /* All possible arraydescr values are defined in the vector "descriptors" |
| * below. That's defined later because the appropriate get and set |
| * functions aren't visible yet. |
| */ |
| struct arraydescr { |
| int typecode; |
| int itemsize; |
| PyObject * (*getitem)(struct arrayobject *, Py_ssize_t); |
| int (*setitem)(struct arrayobject *, Py_ssize_t, PyObject *); |
| }; |
| |
| typedef struct arrayobject { |
| PyObject_HEAD |
| Py_ssize_t ob_size; |
| char *ob_item; |
| Py_ssize_t allocated; |
| struct arraydescr *ob_descr; |
| PyObject *weakreflist; /* List of weak references */ |
| } arrayobject; |
| |
| static PyTypeObject Arraytype; |
| |
| #define array_Check(op) PyObject_TypeCheck(op, &Arraytype) |
| #define array_CheckExact(op) ((op)->ob_type == &Arraytype) |
| |
| static int |
| array_resize(arrayobject *self, Py_ssize_t newsize) |
| { |
| char *items; |
| size_t _new_size; |
| |
| /* Bypass realloc() when a previous overallocation is large enough |
| to accommodate the newsize. If the newsize is 16 smaller than the |
| current size, then proceed with the realloc() to shrink the list. |
| */ |
| |
| if (self->allocated >= newsize && |
| self->ob_size < newsize + 16 && |
| self->ob_item != NULL) { |
| self->ob_size = newsize; |
| return 0; |
| } |
| |
| /* This over-allocates proportional to the array size, making room |
| * for additional growth. The over-allocation is mild, but is |
| * enough to give linear-time amortized behavior over a long |
| * sequence of appends() in the presence of a poorly-performing |
| * system realloc(). |
| * The growth pattern is: 0, 4, 8, 16, 25, 34, 46, 56, 67, 79, ... |
| * Note, the pattern starts out the same as for lists but then |
| * grows at a smaller rate so that larger arrays only overallocate |
| * by about 1/16th -- this is done because arrays are presumed to be more |
| * memory critical. |
| */ |
| |
| _new_size = (newsize >> 4) + (self->ob_size < 8 ? 3 : 7) + newsize; |
| items = self->ob_item; |
| /* XXX The following multiplication and division does not optimize away |
| like it does for lists since the size is not known at compile time */ |
| if (_new_size <= ((~(size_t)0) / self->ob_descr->itemsize)) |
| PyMem_RESIZE(items, char, (_new_size * self->ob_descr->itemsize)); |
| else |
| items = NULL; |
| if (items == NULL) { |
| PyErr_NoMemory(); |
| return -1; |
| } |
| self->ob_item = items; |
| self->ob_size = newsize; |
| self->allocated = _new_size; |
| return 0; |
| } |
| |
| /**************************************************************************** |
| Get and Set functions for each type. |
| A Get function takes an arrayobject* and an integer index, returning the |
| array value at that index wrapped in an appropriate PyObject*. |
| A Set function takes an arrayobject, integer index, and PyObject*; sets |
| the array value at that index to the raw C data extracted from the PyObject*, |
| and returns 0 if successful, else nonzero on failure (PyObject* not of an |
| appropriate type or value). |
| Note that the basic Get and Set functions do NOT check that the index is |
| in bounds; that's the responsibility of the caller. |
| ****************************************************************************/ |
| |
| static PyObject * |
| c_getitem(arrayobject *ap, Py_ssize_t i) |
| { |
| return PyString_FromStringAndSize(&((char *)ap->ob_item)[i], 1); |
| } |
| |
| static int |
| c_setitem(arrayobject *ap, Py_ssize_t i, PyObject *v) |
| { |
| char x; |
| if (!PyArg_Parse(v, "c;array item must be char", &x)) |
| return -1; |
| if (i >= 0) |
| ((char *)ap->ob_item)[i] = x; |
| return 0; |
| } |
| |
| static PyObject * |
| b_getitem(arrayobject *ap, Py_ssize_t i) |
| { |
| long x = ((char *)ap->ob_item)[i]; |
| if (x >= 128) |
| x -= 256; |
| return PyInt_FromLong(x); |
| } |
| |
| static int |
| b_setitem(arrayobject *ap, Py_ssize_t i, PyObject *v) |
| { |
| short x; |
| /* PyArg_Parse's 'b' formatter is for an unsigned char, therefore |
| must use the next size up that is signed ('h') and manually do |
| the overflow checking */ |
| if (!PyArg_Parse(v, "h;array item must be integer", &x)) |
| return -1; |
| else if (x < -128) { |
| PyErr_SetString(PyExc_OverflowError, |
| "signed char is less than minimum"); |
| return -1; |
| } |
| else if (x > 127) { |
| PyErr_SetString(PyExc_OverflowError, |
| "signed char is greater than maximum"); |
| return -1; |
| } |
| if (i >= 0) |
| ((char *)ap->ob_item)[i] = (char)x; |
| return 0; |
| } |
| |
| static PyObject * |
| BB_getitem(arrayobject *ap, Py_ssize_t i) |
| { |
| long x = ((unsigned char *)ap->ob_item)[i]; |
| return PyInt_FromLong(x); |
| } |
| |
| static int |
| BB_setitem(arrayobject *ap, Py_ssize_t i, PyObject *v) |
| { |
| unsigned char x; |
| /* 'B' == unsigned char, maps to PyArg_Parse's 'b' formatter */ |
| if (!PyArg_Parse(v, "b;array item must be integer", &x)) |
| return -1; |
| if (i >= 0) |
| ((char *)ap->ob_item)[i] = x; |
| return 0; |
| } |
| |
| #ifdef Py_USING_UNICODE |
| static PyObject * |
| u_getitem(arrayobject *ap, Py_ssize_t i) |
| { |
| return PyUnicode_FromUnicode(&((Py_UNICODE *) ap->ob_item)[i], 1); |
| } |
| |
| static int |
| u_setitem(arrayobject *ap, Py_ssize_t i, PyObject *v) |
| { |
| Py_UNICODE *p; |
| Py_ssize_t len; |
| |
| if (!PyArg_Parse(v, "u#;array item must be unicode character", &p, &len)) |
| return -1; |
| if (len != 1) { |
| PyErr_SetString(PyExc_TypeError, "array item must be unicode character"); |
| return -1; |
| } |
| if (i >= 0) |
| ((Py_UNICODE *)ap->ob_item)[i] = p[0]; |
| return 0; |
| } |
| #endif |
| |
| static PyObject * |
| h_getitem(arrayobject *ap, Py_ssize_t i) |
| { |
| return PyInt_FromLong((long) ((short *)ap->ob_item)[i]); |
| } |
| |
| static int |
| h_setitem(arrayobject *ap, Py_ssize_t i, PyObject *v) |
| { |
| short x; |
| /* 'h' == signed short, maps to PyArg_Parse's 'h' formatter */ |
| if (!PyArg_Parse(v, "h;array item must be integer", &x)) |
| return -1; |
| if (i >= 0) |
| ((short *)ap->ob_item)[i] = x; |
| return 0; |
| } |
| |
| static PyObject * |
| HH_getitem(arrayobject *ap, Py_ssize_t i) |
| { |
| return PyInt_FromLong((long) ((unsigned short *)ap->ob_item)[i]); |
| } |
| |
| static int |
| HH_setitem(arrayobject *ap, Py_ssize_t i, PyObject *v) |
| { |
| int x; |
| /* PyArg_Parse's 'h' formatter is for a signed short, therefore |
| must use the next size up and manually do the overflow checking */ |
| if (!PyArg_Parse(v, "i;array item must be integer", &x)) |
| return -1; |
| else if (x < 0) { |
| PyErr_SetString(PyExc_OverflowError, |
| "unsigned short is less than minimum"); |
| return -1; |
| } |
| else if (x > USHRT_MAX) { |
| PyErr_SetString(PyExc_OverflowError, |
| "unsigned short is greater than maximum"); |
| return -1; |
| } |
| if (i >= 0) |
| ((short *)ap->ob_item)[i] = (short)x; |
| return 0; |
| } |
| |
| static PyObject * |
| i_getitem(arrayobject *ap, Py_ssize_t i) |
| { |
| return PyInt_FromLong((long) ((int *)ap->ob_item)[i]); |
| } |
| |
| static int |
| i_setitem(arrayobject *ap, Py_ssize_t i, PyObject *v) |
| { |
| int x; |
| /* 'i' == signed int, maps to PyArg_Parse's 'i' formatter */ |
| if (!PyArg_Parse(v, "i;array item must be integer", &x)) |
| return -1; |
| if (i >= 0) |
| ((int *)ap->ob_item)[i] = x; |
| return 0; |
| } |
| |
| static PyObject * |
| II_getitem(arrayobject *ap, Py_ssize_t i) |
| { |
| return PyLong_FromUnsignedLong( |
| (unsigned long) ((unsigned int *)ap->ob_item)[i]); |
| } |
| |
| static int |
| II_setitem(arrayobject *ap, Py_ssize_t i, PyObject *v) |
| { |
| unsigned long x; |
| if (PyLong_Check(v)) { |
| x = PyLong_AsUnsignedLong(v); |
| if (x == (unsigned long) -1 && PyErr_Occurred()) |
| return -1; |
| } |
| else { |
| long y; |
| if (!PyArg_Parse(v, "l;array item must be integer", &y)) |
| return -1; |
| if (y < 0) { |
| PyErr_SetString(PyExc_OverflowError, |
| "unsigned int is less than minimum"); |
| return -1; |
| } |
| x = (unsigned long)y; |
| |
| } |
| if (x > UINT_MAX) { |
| PyErr_SetString(PyExc_OverflowError, |
| "unsigned int is greater than maximum"); |
| return -1; |
| } |
| |
| if (i >= 0) |
| ((unsigned int *)ap->ob_item)[i] = (unsigned int)x; |
| return 0; |
| } |
| |
| static PyObject * |
| l_getitem(arrayobject *ap, Py_ssize_t i) |
| { |
| return PyInt_FromLong(((long *)ap->ob_item)[i]); |
| } |
| |
| static int |
| l_setitem(arrayobject *ap, Py_ssize_t i, PyObject *v) |
| { |
| long x; |
| if (!PyArg_Parse(v, "l;array item must be integer", &x)) |
| return -1; |
| if (i >= 0) |
| ((long *)ap->ob_item)[i] = x; |
| return 0; |
| } |
| |
| static PyObject * |
| LL_getitem(arrayobject *ap, Py_ssize_t i) |
| { |
| return PyLong_FromUnsignedLong(((unsigned long *)ap->ob_item)[i]); |
| } |
| |
| static int |
| LL_setitem(arrayobject *ap, Py_ssize_t i, PyObject *v) |
| { |
| unsigned long x; |
| if (PyLong_Check(v)) { |
| x = PyLong_AsUnsignedLong(v); |
| if (x == (unsigned long) -1 && PyErr_Occurred()) |
| return -1; |
| } |
| else { |
| long y; |
| if (!PyArg_Parse(v, "l;array item must be integer", &y)) |
| return -1; |
| if (y < 0) { |
| PyErr_SetString(PyExc_OverflowError, |
| "unsigned long is less than minimum"); |
| return -1; |
| } |
| x = (unsigned long)y; |
| |
| } |
| if (x > ULONG_MAX) { |
| PyErr_SetString(PyExc_OverflowError, |
| "unsigned long is greater than maximum"); |
| return -1; |
| } |
| |
| if (i >= 0) |
| ((unsigned long *)ap->ob_item)[i] = x; |
| return 0; |
| } |
| |
| static PyObject * |
| f_getitem(arrayobject *ap, Py_ssize_t i) |
| { |
| return PyFloat_FromDouble((double) ((float *)ap->ob_item)[i]); |
| } |
| |
| static int |
| f_setitem(arrayobject *ap, Py_ssize_t i, PyObject *v) |
| { |
| float x; |
| if (!PyArg_Parse(v, "f;array item must be float", &x)) |
| return -1; |
| if (i >= 0) |
| ((float *)ap->ob_item)[i] = x; |
| return 0; |
| } |
| |
| static PyObject * |
| d_getitem(arrayobject *ap, Py_ssize_t i) |
| { |
| return PyFloat_FromDouble(((double *)ap->ob_item)[i]); |
| } |
| |
| static int |
| d_setitem(arrayobject *ap, Py_ssize_t i, PyObject *v) |
| { |
| double x; |
| if (!PyArg_Parse(v, "d;array item must be float", &x)) |
| return -1; |
| if (i >= 0) |
| ((double *)ap->ob_item)[i] = x; |
| return 0; |
| } |
| |
| /* Description of types */ |
| static struct arraydescr descriptors[] = { |
| {'c', sizeof(char), c_getitem, c_setitem}, |
| {'b', sizeof(char), b_getitem, b_setitem}, |
| {'B', sizeof(char), BB_getitem, BB_setitem}, |
| #ifdef Py_USING_UNICODE |
| {'u', sizeof(Py_UNICODE), u_getitem, u_setitem}, |
| #endif |
| {'h', sizeof(short), h_getitem, h_setitem}, |
| {'H', sizeof(short), HH_getitem, HH_setitem}, |
| {'i', sizeof(int), i_getitem, i_setitem}, |
| {'I', sizeof(int), II_getitem, II_setitem}, |
| {'l', sizeof(long), l_getitem, l_setitem}, |
| {'L', sizeof(long), LL_getitem, LL_setitem}, |
| {'f', sizeof(float), f_getitem, f_setitem}, |
| {'d', sizeof(double), d_getitem, d_setitem}, |
| {'\0', 0, 0, 0} /* Sentinel */ |
| }; |
| |
| /**************************************************************************** |
| Implementations of array object methods. |
| ****************************************************************************/ |
| |
| static PyObject * |
| newarrayobject(PyTypeObject *type, Py_ssize_t size, struct arraydescr *descr) |
| { |
| arrayobject *op; |
| size_t nbytes; |
| |
| if (size < 0) { |
| PyErr_BadInternalCall(); |
| return NULL; |
| } |
| |
| nbytes = size * descr->itemsize; |
| /* Check for overflow */ |
| if (nbytes / descr->itemsize != (size_t)size) { |
| return PyErr_NoMemory(); |
| } |
| op = (arrayobject *) type->tp_alloc(type, 0); |
| if (op == NULL) { |
| return NULL; |
| } |
| op->ob_size = size; |
| if (size <= 0) { |
| op->ob_item = NULL; |
| } |
| else { |
| op->ob_item = PyMem_NEW(char, nbytes); |
| if (op->ob_item == NULL) { |
| PyObject_Del(op); |
| return PyErr_NoMemory(); |
| } |
| } |
| op->ob_descr = descr; |
| op->allocated = size; |
| op->weakreflist = NULL; |
| return (PyObject *) op; |
| } |
| |
| static PyObject * |
| getarrayitem(PyObject *op, Py_ssize_t i) |
| { |
| register arrayobject *ap; |
| assert(array_Check(op)); |
| ap = (arrayobject *)op; |
| assert(i>=0 && i<ap->ob_size); |
| return (*ap->ob_descr->getitem)(ap, i); |
| } |
| |
| static int |
| ins1(arrayobject *self, Py_ssize_t where, PyObject *v) |
| { |
| char *items; |
| Py_ssize_t n = self->ob_size; |
| if (v == NULL) { |
| PyErr_BadInternalCall(); |
| return -1; |
| } |
| if ((*self->ob_descr->setitem)(self, -1, v) < 0) |
| return -1; |
| |
| if (array_resize(self, n+1) == -1) |
| return -1; |
| items = self->ob_item; |
| if (where < 0) { |
| where += n; |
| if (where < 0) |
| where = 0; |
| } |
| if (where > n) |
| where = n; |
| /* appends don't need to call memmove() */ |
| if (where != n) |
| memmove(items + (where+1)*self->ob_descr->itemsize, |
| items + where*self->ob_descr->itemsize, |
| (n-where)*self->ob_descr->itemsize); |
| return (*self->ob_descr->setitem)(self, where, v); |
| } |
| |
| /* Methods */ |
| |
| static void |
| array_dealloc(arrayobject *op) |
| { |
| if (op->weakreflist != NULL) |
| PyObject_ClearWeakRefs((PyObject *) op); |
| if (op->ob_item != NULL) |
| PyMem_DEL(op->ob_item); |
| op->ob_type->tp_free((PyObject *)op); |
| } |
| |
| static PyObject * |
| array_richcompare(PyObject *v, PyObject *w, int op) |
| { |
| arrayobject *va, *wa; |
| PyObject *vi = NULL; |
| PyObject *wi = NULL; |
| Py_ssize_t i, k; |
| PyObject *res; |
| |
| if (!array_Check(v) || !array_Check(w)) { |
| Py_INCREF(Py_NotImplemented); |
| return Py_NotImplemented; |
| } |
| |
| va = (arrayobject *)v; |
| wa = (arrayobject *)w; |
| |
| if (va->ob_size != wa->ob_size && (op == Py_EQ || op == Py_NE)) { |
| /* Shortcut: if the lengths differ, the arrays differ */ |
| if (op == Py_EQ) |
| res = Py_False; |
| else |
| res = Py_True; |
| Py_INCREF(res); |
| return res; |
| } |
| |
| /* Search for the first index where items are different */ |
| k = 1; |
| for (i = 0; i < va->ob_size && i < wa->ob_size; i++) { |
| vi = getarrayitem(v, i); |
| wi = getarrayitem(w, i); |
| if (vi == NULL || wi == NULL) { |
| Py_XDECREF(vi); |
| Py_XDECREF(wi); |
| return NULL; |
| } |
| k = PyObject_RichCompareBool(vi, wi, Py_EQ); |
| if (k == 0) |
| break; /* Keeping vi and wi alive! */ |
| Py_DECREF(vi); |
| Py_DECREF(wi); |
| if (k < 0) |
| return NULL; |
| } |
| |
| if (k) { |
| /* No more items to compare -- compare sizes */ |
| Py_ssize_t vs = va->ob_size; |
| Py_ssize_t ws = wa->ob_size; |
| int cmp; |
| switch (op) { |
| case Py_LT: cmp = vs < ws; break; |
| case Py_LE: cmp = vs <= ws; break; |
| case Py_EQ: cmp = vs == ws; break; |
| case Py_NE: cmp = vs != ws; break; |
| case Py_GT: cmp = vs > ws; break; |
| case Py_GE: cmp = vs >= ws; break; |
| default: return NULL; /* cannot happen */ |
| } |
| if (cmp) |
| res = Py_True; |
| else |
| res = Py_False; |
| Py_INCREF(res); |
| return res; |
| } |
| |
| /* We have an item that differs. First, shortcuts for EQ/NE */ |
| if (op == Py_EQ) { |
| Py_INCREF(Py_False); |
| res = Py_False; |
| } |
| else if (op == Py_NE) { |
| Py_INCREF(Py_True); |
| res = Py_True; |
| } |
| else { |
| /* Compare the final item again using the proper operator */ |
| res = PyObject_RichCompare(vi, wi, op); |
| } |
| Py_DECREF(vi); |
| Py_DECREF(wi); |
| return res; |
| } |
| |
| static Py_ssize_t |
| array_length(arrayobject *a) |
| { |
| return a->ob_size; |
| } |
| |
| static PyObject * |
| array_item(arrayobject *a, Py_ssize_t i) |
| { |
| if (i < 0 || i >= a->ob_size) { |
| PyErr_SetString(PyExc_IndexError, "array index out of range"); |
| return NULL; |
| } |
| return getarrayitem((PyObject *)a, i); |
| } |
| |
| static PyObject * |
| array_slice(arrayobject *a, Py_ssize_t ilow, Py_ssize_t ihigh) |
| { |
| arrayobject *np; |
| if (ilow < 0) |
| ilow = 0; |
| else if (ilow > a->ob_size) |
| ilow = a->ob_size; |
| if (ihigh < 0) |
| ihigh = 0; |
| if (ihigh < ilow) |
| ihigh = ilow; |
| else if (ihigh > a->ob_size) |
| ihigh = a->ob_size; |
| np = (arrayobject *) newarrayobject(&Arraytype, ihigh - ilow, a->ob_descr); |
| if (np == NULL) |
| return NULL; |
| memcpy(np->ob_item, a->ob_item + ilow * a->ob_descr->itemsize, |
| (ihigh-ilow) * a->ob_descr->itemsize); |
| return (PyObject *)np; |
| } |
| |
| static PyObject * |
| array_copy(arrayobject *a, PyObject *unused) |
| { |
| return array_slice(a, 0, a->ob_size); |
| } |
| |
| PyDoc_STRVAR(copy_doc, |
| "copy(array)\n\ |
| \n\ |
| Return a copy of the array."); |
| |
| static PyObject * |
| array_concat(arrayobject *a, PyObject *bb) |
| { |
| Py_ssize_t size; |
| arrayobject *np; |
| if (!array_Check(bb)) { |
| PyErr_Format(PyExc_TypeError, |
| "can only append array (not \"%.200s\") to array", |
| bb->ob_type->tp_name); |
| return NULL; |
| } |
| #define b ((arrayobject *)bb) |
| if (a->ob_descr != b->ob_descr) { |
| PyErr_BadArgument(); |
| return NULL; |
| } |
| size = a->ob_size + b->ob_size; |
| np = (arrayobject *) newarrayobject(&Arraytype, size, a->ob_descr); |
| if (np == NULL) { |
| return NULL; |
| } |
| memcpy(np->ob_item, a->ob_item, a->ob_size*a->ob_descr->itemsize); |
| memcpy(np->ob_item + a->ob_size*a->ob_descr->itemsize, |
| b->ob_item, b->ob_size*b->ob_descr->itemsize); |
| return (PyObject *)np; |
| #undef b |
| } |
| |
| static PyObject * |
| array_repeat(arrayobject *a, Py_ssize_t n) |
| { |
| Py_ssize_t i; |
| Py_ssize_t size; |
| arrayobject *np; |
| char *p; |
| Py_ssize_t nbytes; |
| if (n < 0) |
| n = 0; |
| size = a->ob_size * n; |
| np = (arrayobject *) newarrayobject(&Arraytype, size, a->ob_descr); |
| if (np == NULL) |
| return NULL; |
| p = np->ob_item; |
| nbytes = a->ob_size * a->ob_descr->itemsize; |
| for (i = 0; i < n; i++) { |
| memcpy(p, a->ob_item, nbytes); |
| p += nbytes; |
| } |
| return (PyObject *) np; |
| } |
| |
| static int |
| array_ass_slice(arrayobject *a, Py_ssize_t ilow, Py_ssize_t ihigh, PyObject *v) |
| { |
| char *item; |
| Py_ssize_t n; /* Size of replacement array */ |
| Py_ssize_t d; /* Change in size */ |
| #define b ((arrayobject *)v) |
| if (v == NULL) |
| n = 0; |
| else if (array_Check(v)) { |
| n = b->ob_size; |
| if (a == b) { |
| /* Special case "a[i:j] = a" -- copy b first */ |
| int ret; |
| v = array_slice(b, 0, n); |
| ret = array_ass_slice(a, ilow, ihigh, v); |
| Py_DECREF(v); |
| return ret; |
| } |
| if (b->ob_descr != a->ob_descr) { |
| PyErr_BadArgument(); |
| return -1; |
| } |
| } |
| else { |
| PyErr_Format(PyExc_TypeError, |
| "can only assign array (not \"%.200s\") to array slice", |
| v->ob_type->tp_name); |
| return -1; |
| } |
| if (ilow < 0) |
| ilow = 0; |
| else if (ilow > a->ob_size) |
| ilow = a->ob_size; |
| if (ihigh < 0) |
| ihigh = 0; |
| if (ihigh < ilow) |
| ihigh = ilow; |
| else if (ihigh > a->ob_size) |
| ihigh = a->ob_size; |
| item = a->ob_item; |
| d = n - (ihigh-ilow); |
| if (d < 0) { /* Delete -d items */ |
| memmove(item + (ihigh+d)*a->ob_descr->itemsize, |
| item + ihigh*a->ob_descr->itemsize, |
| (a->ob_size-ihigh)*a->ob_descr->itemsize); |
| a->ob_size += d; |
| PyMem_RESIZE(item, char, a->ob_size*a->ob_descr->itemsize); |
| /* Can't fail */ |
| a->ob_item = item; |
| a->allocated = a->ob_size; |
| } |
| else if (d > 0) { /* Insert d items */ |
| PyMem_RESIZE(item, char, |
| (a->ob_size + d)*a->ob_descr->itemsize); |
| if (item == NULL) { |
| PyErr_NoMemory(); |
| return -1; |
| } |
| memmove(item + (ihigh+d)*a->ob_descr->itemsize, |
| item + ihigh*a->ob_descr->itemsize, |
| (a->ob_size-ihigh)*a->ob_descr->itemsize); |
| a->ob_item = item; |
| a->ob_size += d; |
| a->allocated = a->ob_size; |
| } |
| if (n > 0) |
| memcpy(item + ilow*a->ob_descr->itemsize, b->ob_item, |
| n*b->ob_descr->itemsize); |
| return 0; |
| #undef b |
| } |
| |
| static int |
| array_ass_item(arrayobject *a, Py_ssize_t i, PyObject *v) |
| { |
| if (i < 0 || i >= a->ob_size) { |
| PyErr_SetString(PyExc_IndexError, |
| "array assignment index out of range"); |
| return -1; |
| } |
| if (v == NULL) |
| return array_ass_slice(a, i, i+1, v); |
| return (*a->ob_descr->setitem)(a, i, v); |
| } |
| |
| static int |
| setarrayitem(PyObject *a, Py_ssize_t i, PyObject *v) |
| { |
| assert(array_Check(a)); |
| return array_ass_item((arrayobject *)a, i, v); |
| } |
| |
| static int |
| array_iter_extend(arrayobject *self, PyObject *bb) |
| { |
| PyObject *it, *v; |
| |
| it = PyObject_GetIter(bb); |
| if (it == NULL) |
| return -1; |
| |
| while ((v = PyIter_Next(it)) != NULL) { |
| if (ins1(self, (int) self->ob_size, v) != 0) { |
| Py_DECREF(v); |
| Py_DECREF(it); |
| return -1; |
| } |
| Py_DECREF(v); |
| } |
| Py_DECREF(it); |
| if (PyErr_Occurred()) |
| return -1; |
| return 0; |
| } |
| |
| static int |
| array_do_extend(arrayobject *self, PyObject *bb) |
| { |
| Py_ssize_t size; |
| |
| if (!array_Check(bb)) |
| return array_iter_extend(self, bb); |
| #define b ((arrayobject *)bb) |
| if (self->ob_descr != b->ob_descr) { |
| PyErr_SetString(PyExc_TypeError, |
| "can only extend with array of same kind"); |
| return -1; |
| } |
| size = self->ob_size + b->ob_size; |
| PyMem_RESIZE(self->ob_item, char, size*self->ob_descr->itemsize); |
| if (self->ob_item == NULL) { |
| PyObject_Del(self); |
| PyErr_NoMemory(); |
| return -1; |
| } |
| memcpy(self->ob_item + self->ob_size*self->ob_descr->itemsize, |
| b->ob_item, b->ob_size*b->ob_descr->itemsize); |
| self->ob_size = size; |
| self->allocated = size; |
| |
| return 0; |
| #undef b |
| } |
| |
| static PyObject * |
| array_inplace_concat(arrayobject *self, PyObject *bb) |
| { |
| if (!array_Check(bb)) { |
| PyErr_Format(PyExc_TypeError, |
| "can only extend array with array (not \"%.200s\")", |
| bb->ob_type->tp_name); |
| return NULL; |
| } |
| if (array_do_extend(self, bb) == -1) |
| return NULL; |
| Py_INCREF(self); |
| return (PyObject *)self; |
| } |
| |
| static PyObject * |
| array_inplace_repeat(arrayobject *self, Py_ssize_t n) |
| { |
| char *items, *p; |
| Py_ssize_t size, i; |
| |
| if (self->ob_size > 0) { |
| if (n < 0) |
| n = 0; |
| items = self->ob_item; |
| size = self->ob_size * self->ob_descr->itemsize; |
| if (n == 0) { |
| PyMem_FREE(items); |
| self->ob_item = NULL; |
| self->ob_size = 0; |
| self->allocated = 0; |
| } |
| else { |
| PyMem_Resize(items, char, n * size); |
| if (items == NULL) |
| return PyErr_NoMemory(); |
| p = items; |
| for (i = 1; i < n; i++) { |
| p += size; |
| memcpy(p, items, size); |
| } |
| self->ob_item = items; |
| self->ob_size *= n; |
| self->allocated = self->ob_size; |
| } |
| } |
| Py_INCREF(self); |
| return (PyObject *)self; |
| } |
| |
| |
| static PyObject * |
| ins(arrayobject *self, Py_ssize_t where, PyObject *v) |
| { |
| if (ins1(self, where, v) != 0) |
| return NULL; |
| Py_INCREF(Py_None); |
| return Py_None; |
| } |
| |
| static PyObject * |
| array_count(arrayobject *self, PyObject *v) |
| { |
| Py_ssize_t count = 0; |
| Py_ssize_t i; |
| |
| for (i = 0; i < self->ob_size; i++) { |
| PyObject *selfi = getarrayitem((PyObject *)self, i); |
| int cmp = PyObject_RichCompareBool(selfi, v, Py_EQ); |
| Py_DECREF(selfi); |
| if (cmp > 0) |
| count++; |
| else if (cmp < 0) |
| return NULL; |
| } |
| return PyInt_FromSsize_t(count); |
| } |
| |
| PyDoc_STRVAR(count_doc, |
| "count(x)\n\ |
| \n\ |
| Return number of occurences of x in the array."); |
| |
| static PyObject * |
| array_index(arrayobject *self, PyObject *v) |
| { |
| Py_ssize_t i; |
| |
| for (i = 0; i < self->ob_size; i++) { |
| PyObject *selfi = getarrayitem((PyObject *)self, i); |
| int cmp = PyObject_RichCompareBool(selfi, v, Py_EQ); |
| Py_DECREF(selfi); |
| if (cmp > 0) { |
| return PyInt_FromLong((long)i); |
| } |
| else if (cmp < 0) |
| return NULL; |
| } |
| PyErr_SetString(PyExc_ValueError, "array.index(x): x not in list"); |
| return NULL; |
| } |
| |
| PyDoc_STRVAR(index_doc, |
| "index(x)\n\ |
| \n\ |
| Return index of first occurence of x in the array."); |
| |
| static int |
| array_contains(arrayobject *self, PyObject *v) |
| { |
| Py_ssize_t i; |
| int cmp; |
| |
| for (i = 0, cmp = 0 ; cmp == 0 && i < self->ob_size; i++) { |
| PyObject *selfi = getarrayitem((PyObject *)self, i); |
| cmp = PyObject_RichCompareBool(selfi, v, Py_EQ); |
| Py_DECREF(selfi); |
| } |
| return cmp; |
| } |
| |
| static PyObject * |
| array_remove(arrayobject *self, PyObject *v) |
| { |
| int i; |
| |
| for (i = 0; i < self->ob_size; i++) { |
| PyObject *selfi = getarrayitem((PyObject *)self,i); |
| int cmp = PyObject_RichCompareBool(selfi, v, Py_EQ); |
| Py_DECREF(selfi); |
| if (cmp > 0) { |
| if (array_ass_slice(self, i, i+1, |
| (PyObject *)NULL) != 0) |
| return NULL; |
| Py_INCREF(Py_None); |
| return Py_None; |
| } |
| else if (cmp < 0) |
| return NULL; |
| } |
| PyErr_SetString(PyExc_ValueError, "array.remove(x): x not in list"); |
| return NULL; |
| } |
| |
| PyDoc_STRVAR(remove_doc, |
| "remove(x)\n\ |
| \n\ |
| Remove the first occurence of x in the array."); |
| |
| static PyObject * |
| array_pop(arrayobject *self, PyObject *args) |
| { |
| Py_ssize_t i = -1; |
| PyObject *v; |
| if (!PyArg_ParseTuple(args, "|n:pop", &i)) |
| return NULL; |
| if (self->ob_size == 0) { |
| /* Special-case most common failure cause */ |
| PyErr_SetString(PyExc_IndexError, "pop from empty array"); |
| return NULL; |
| } |
| if (i < 0) |
| i += self->ob_size; |
| if (i < 0 || i >= self->ob_size) { |
| PyErr_SetString(PyExc_IndexError, "pop index out of range"); |
| return NULL; |
| } |
| v = getarrayitem((PyObject *)self,i); |
| if (array_ass_slice(self, i, i+1, (PyObject *)NULL) != 0) { |
| Py_DECREF(v); |
| return NULL; |
| } |
| return v; |
| } |
| |
| PyDoc_STRVAR(pop_doc, |
| "pop([i])\n\ |
| \n\ |
| Return the i-th element and delete it from the array. i defaults to -1."); |
| |
| static PyObject * |
| array_extend(arrayobject *self, PyObject *bb) |
| { |
| if (array_do_extend(self, bb) == -1) |
| return NULL; |
| Py_INCREF(Py_None); |
| return Py_None; |
| } |
| |
| PyDoc_STRVAR(extend_doc, |
| "extend(array or iterable)\n\ |
| \n\ |
| Append items to the end of the array."); |
| |
| static PyObject * |
| array_insert(arrayobject *self, PyObject *args) |
| { |
| int i; |
| PyObject *v; |
| if (!PyArg_ParseTuple(args, "iO:insert", &i, &v)) |
| return NULL; |
| return ins(self, i, v); |
| } |
| |
| PyDoc_STRVAR(insert_doc, |
| "insert(i,x)\n\ |
| \n\ |
| Insert a new item x into the array before position i."); |
| |
| |
| static PyObject * |
| array_buffer_info(arrayobject *self, PyObject *unused) |
| { |
| PyObject* retval = NULL; |
| retval = PyTuple_New(2); |
| if (!retval) |
| return NULL; |
| |
| PyTuple_SET_ITEM(retval, 0, PyLong_FromVoidPtr(self->ob_item)); |
| PyTuple_SET_ITEM(retval, 1, PyInt_FromLong((long)(self->ob_size))); |
| |
| return retval; |
| } |
| |
| PyDoc_STRVAR(buffer_info_doc, |
| "buffer_info() -> (address, length)\n\ |
| \n\ |
| Return a tuple (address, length) giving the current memory address and\n\ |
| the length in items of the buffer used to hold array's contents\n\ |
| The length should be multiplied by the itemsize attribute to calculate\n\ |
| the buffer length in bytes."); |
| |
| |
| static PyObject * |
| array_append(arrayobject *self, PyObject *v) |
| { |
| return ins(self, (int) self->ob_size, v); |
| } |
| |
| PyDoc_STRVAR(append_doc, |
| "append(x)\n\ |
| \n\ |
| Append new value x to the end of the array."); |
| |
| |
| static PyObject * |
| array_byteswap(arrayobject *self, PyObject *unused) |
| { |
| char *p; |
| Py_ssize_t i; |
| |
| switch (self->ob_descr->itemsize) { |
| case 1: |
| break; |
| case 2: |
| for (p = self->ob_item, i = self->ob_size; --i >= 0; p += 2) { |
| char p0 = p[0]; |
| p[0] = p[1]; |
| p[1] = p0; |
| } |
| break; |
| case 4: |
| for (p = self->ob_item, i = self->ob_size; --i >= 0; p += 4) { |
| char p0 = p[0]; |
| char p1 = p[1]; |
| p[0] = p[3]; |
| p[1] = p[2]; |
| p[2] = p1; |
| p[3] = p0; |
| } |
| break; |
| case 8: |
| for (p = self->ob_item, i = self->ob_size; --i >= 0; p += 8) { |
| char p0 = p[0]; |
| char p1 = p[1]; |
| char p2 = p[2]; |
| char p3 = p[3]; |
| p[0] = p[7]; |
| p[1] = p[6]; |
| p[2] = p[5]; |
| p[3] = p[4]; |
| p[4] = p3; |
| p[5] = p2; |
| p[6] = p1; |
| p[7] = p0; |
| } |
| break; |
| default: |
| PyErr_SetString(PyExc_RuntimeError, |
| "don't know how to byteswap this array type"); |
| return NULL; |
| } |
| Py_INCREF(Py_None); |
| return Py_None; |
| } |
| |
| PyDoc_STRVAR(byteswap_doc, |
| "byteswap()\n\ |
| \n\ |
| Byteswap all items of the array. If the items in the array are not 1, 2,\n\ |
| 4, or 8 bytes in size, RuntimeError is raised."); |
| |
| static PyObject * |
| array_reduce(arrayobject *array) |
| { |
| PyObject *dict, *result; |
| |
| dict = PyObject_GetAttrString((PyObject *)array, "__dict__"); |
| if (dict == NULL) { |
| PyErr_Clear(); |
| dict = Py_None; |
| Py_INCREF(dict); |
| } |
| result = Py_BuildValue("O(cs#)O", |
| array->ob_type, |
| array->ob_descr->typecode, |
| array->ob_item, |
| array->ob_size * array->ob_descr->itemsize, |
| dict); |
| Py_DECREF(dict); |
| return result; |
| } |
| |
| PyDoc_STRVAR(array_doc, "Return state information for pickling."); |
| |
| static PyObject * |
| array_reverse(arrayobject *self, PyObject *unused) |
| { |
| register Py_ssize_t itemsize = self->ob_descr->itemsize; |
| register char *p, *q; |
| /* little buffer to hold items while swapping */ |
| char tmp[256]; /* 8 is probably enough -- but why skimp */ |
| assert(itemsize <= sizeof(tmp)); |
| |
| if (self->ob_size > 1) { |
| for (p = self->ob_item, |
| q = self->ob_item + (self->ob_size - 1)*itemsize; |
| p < q; |
| p += itemsize, q -= itemsize) { |
| /* memory areas guaranteed disjoint, so memcpy |
| * is safe (& memmove may be slower). |
| */ |
| memcpy(tmp, p, itemsize); |
| memcpy(p, q, itemsize); |
| memcpy(q, tmp, itemsize); |
| } |
| } |
| |
| Py_INCREF(Py_None); |
| return Py_None; |
| } |
| |
| PyDoc_STRVAR(reverse_doc, |
| "reverse()\n\ |
| \n\ |
| Reverse the order of the items in the array."); |
| |
| static PyObject * |
| array_fromfile(arrayobject *self, PyObject *args) |
| { |
| PyObject *f; |
| Py_ssize_t n; |
| FILE *fp; |
| if (!PyArg_ParseTuple(args, "On:fromfile", &f, &n)) |
| return NULL; |
| fp = PyFile_AsFile(f); |
| if (fp == NULL) { |
| PyErr_SetString(PyExc_TypeError, "arg1 must be open file"); |
| return NULL; |
| } |
| if (n > 0) { |
| char *item = self->ob_item; |
| Py_ssize_t itemsize = self->ob_descr->itemsize; |
| size_t nread; |
| Py_ssize_t newlength; |
| size_t newbytes; |
| /* Be careful here about overflow */ |
| if ((newlength = self->ob_size + n) <= 0 || |
| (newbytes = newlength * itemsize) / itemsize != |
| (size_t)newlength) |
| goto nomem; |
| PyMem_RESIZE(item, char, newbytes); |
| if (item == NULL) { |
| nomem: |
| PyErr_NoMemory(); |
| return NULL; |
| } |
| self->ob_item = item; |
| self->ob_size += n; |
| self->allocated = self->ob_size; |
| nread = fread(item + (self->ob_size - n) * itemsize, |
| itemsize, n, fp); |
| if (nread < (size_t)n) { |
| self->ob_size -= (n - nread); |
| PyMem_RESIZE(item, char, self->ob_size*itemsize); |
| self->ob_item = item; |
| self->allocated = self->ob_size; |
| PyErr_SetString(PyExc_EOFError, |
| "not enough items in file"); |
| return NULL; |
| } |
| } |
| Py_INCREF(Py_None); |
| return Py_None; |
| } |
| |
| PyDoc_STRVAR(fromfile_doc, |
| "fromfile(f, n)\n\ |
| \n\ |
| Read n objects from the file object f and append them to the end of the\n\ |
| array. Also called as read."); |
| |
| |
| static PyObject * |
| array_tofile(arrayobject *self, PyObject *f) |
| { |
| FILE *fp; |
| |
| fp = PyFile_AsFile(f); |
| if (fp == NULL) { |
| PyErr_SetString(PyExc_TypeError, "arg must be open file"); |
| return NULL; |
| } |
| if (self->ob_size > 0) { |
| if (fwrite(self->ob_item, self->ob_descr->itemsize, |
| self->ob_size, fp) != (size_t)self->ob_size) { |
| PyErr_SetFromErrno(PyExc_IOError); |
| clearerr(fp); |
| return NULL; |
| } |
| } |
| Py_INCREF(Py_None); |
| return Py_None; |
| } |
| |
| PyDoc_STRVAR(tofile_doc, |
| "tofile(f)\n\ |
| \n\ |
| Write all items (as machine values) to the file object f. Also called as\n\ |
| write."); |
| |
| |
| static PyObject * |
| array_fromlist(arrayobject *self, PyObject *list) |
| { |
| Py_ssize_t n; |
| Py_ssize_t itemsize = self->ob_descr->itemsize; |
| |
| if (!PyList_Check(list)) { |
| PyErr_SetString(PyExc_TypeError, "arg must be list"); |
| return NULL; |
| } |
| n = PyList_Size(list); |
| if (n > 0) { |
| char *item = self->ob_item; |
| Py_ssize_t i; |
| PyMem_RESIZE(item, char, (self->ob_size + n) * itemsize); |
| if (item == NULL) { |
| PyErr_NoMemory(); |
| return NULL; |
| } |
| self->ob_item = item; |
| self->ob_size += n; |
| self->allocated = self->ob_size; |
| for (i = 0; i < n; i++) { |
| PyObject *v = PyList_GetItem(list, i); |
| if ((*self->ob_descr->setitem)(self, |
| self->ob_size - n + i, v) != 0) { |
| self->ob_size -= n; |
| PyMem_RESIZE(item, char, |
| self->ob_size * itemsize); |
| self->ob_item = item; |
| self->allocated = self->ob_size; |
| return NULL; |
| } |
| } |
| } |
| Py_INCREF(Py_None); |
| return Py_None; |
| } |
| |
| PyDoc_STRVAR(fromlist_doc, |
| "fromlist(list)\n\ |
| \n\ |
| Append items to array from list."); |
| |
| |
| static PyObject * |
| array_tolist(arrayobject *self, PyObject *unused) |
| { |
| PyObject *list = PyList_New(self->ob_size); |
| Py_ssize_t i; |
| |
| if (list == NULL) |
| return NULL; |
| for (i = 0; i < self->ob_size; i++) { |
| PyObject *v = getarrayitem((PyObject *)self, i); |
| if (v == NULL) { |
| Py_DECREF(list); |
| return NULL; |
| } |
| PyList_SetItem(list, i, v); |
| } |
| return list; |
| } |
| |
| PyDoc_STRVAR(tolist_doc, |
| "tolist() -> list\n\ |
| \n\ |
| Convert array to an ordinary list with the same items."); |
| |
| |
| static PyObject * |
| array_fromstring(arrayobject *self, PyObject *args) |
| { |
| char *str; |
| Py_ssize_t n; |
| int itemsize = self->ob_descr->itemsize; |
| if (!PyArg_ParseTuple(args, "s#:fromstring", &str, &n)) |
| return NULL; |
| if (n % itemsize != 0) { |
| PyErr_SetString(PyExc_ValueError, |
| "string length not a multiple of item size"); |
| return NULL; |
| } |
| n = n / itemsize; |
| if (n > 0) { |
| char *item = self->ob_item; |
| PyMem_RESIZE(item, char, (self->ob_size + n) * itemsize); |
| if (item == NULL) { |
| PyErr_NoMemory(); |
| return NULL; |
| } |
| self->ob_item = item; |
| self->ob_size += n; |
| self->allocated = self->ob_size; |
| memcpy(item + (self->ob_size - n) * itemsize, |
| str, itemsize*n); |
| } |
| Py_INCREF(Py_None); |
| return Py_None; |
| } |
| |
| PyDoc_STRVAR(fromstring_doc, |
| "fromstring(string)\n\ |
| \n\ |
| Appends items from the string, interpreting it as an array of machine\n\ |
| values,as if it had been read from a file using the fromfile() method)."); |
| |
| |
| static PyObject * |
| array_tostring(arrayobject *self, PyObject *unused) |
| { |
| return PyString_FromStringAndSize(self->ob_item, |
| self->ob_size * self->ob_descr->itemsize); |
| } |
| |
| PyDoc_STRVAR(tostring_doc, |
| "tostring() -> string\n\ |
| \n\ |
| Convert the array to an array of machine values and return the string\n\ |
| representation."); |
| |
| |
| |
| #ifdef Py_USING_UNICODE |
| static PyObject * |
| array_fromunicode(arrayobject *self, PyObject *args) |
| { |
| Py_UNICODE *ustr; |
| Py_ssize_t n; |
| |
| if (!PyArg_ParseTuple(args, "u#:fromunicode", &ustr, &n)) |
| return NULL; |
| if (self->ob_descr->typecode != 'u') { |
| PyErr_SetString(PyExc_ValueError, |
| "fromunicode() may only be called on " |
| "type 'u' arrays"); |
| return NULL; |
| } |
| if (n > 0) { |
| Py_UNICODE *item = (Py_UNICODE *) self->ob_item; |
| PyMem_RESIZE(item, Py_UNICODE, self->ob_size + n); |
| if (item == NULL) { |
| PyErr_NoMemory(); |
| return NULL; |
| } |
| self->ob_item = (char *) item; |
| self->ob_size += n; |
| self->allocated = self->ob_size; |
| memcpy(item + self->ob_size - n, |
| ustr, n * sizeof(Py_UNICODE)); |
| } |
| |
| Py_INCREF(Py_None); |
| return Py_None; |
| } |
| |
| PyDoc_STRVAR(fromunicode_doc, |
| "fromunicode(ustr)\n\ |
| \n\ |
| Extends this array with data from the unicode string ustr.\n\ |
| The array must be a type 'u' array; otherwise a ValueError\n\ |
| is raised. Use array.fromstring(ustr.decode(...)) to\n\ |
| append Unicode data to an array of some other type."); |
| |
| |
| static PyObject * |
| array_tounicode(arrayobject *self, PyObject *unused) |
| { |
| if (self->ob_descr->typecode != 'u') { |
| PyErr_SetString(PyExc_ValueError, |
| "tounicode() may only be called on type 'u' arrays"); |
| return NULL; |
| } |
| return PyUnicode_FromUnicode((Py_UNICODE *) self->ob_item, self->ob_size); |
| } |
| |
| PyDoc_STRVAR(tounicode_doc, |
| "tounicode() -> unicode\n\ |
| \n\ |
| Convert the array to a unicode string. The array must be\n\ |
| a type 'u' array; otherwise a ValueError is raised. Use\n\ |
| array.tostring().decode() to obtain a unicode string from\n\ |
| an array of some other type."); |
| |
| #endif /* Py_USING_UNICODE */ |
| |
| |
| static PyObject * |
| array_get_typecode(arrayobject *a, void *closure) |
| { |
| char tc = a->ob_descr->typecode; |
| return PyString_FromStringAndSize(&tc, 1); |
| } |
| |
| static PyObject * |
| array_get_itemsize(arrayobject *a, void *closure) |
| { |
| return PyInt_FromLong((long)a->ob_descr->itemsize); |
| } |
| |
| static PyGetSetDef array_getsets [] = { |
| {"typecode", (getter) array_get_typecode, NULL, |
| "the typecode character used to create the array"}, |
| {"itemsize", (getter) array_get_itemsize, NULL, |
| "the size, in bytes, of one array item"}, |
| {NULL} |
| }; |
| |
| PyMethodDef array_methods[] = { |
| {"append", (PyCFunction)array_append, METH_O, |
| append_doc}, |
| {"buffer_info", (PyCFunction)array_buffer_info, METH_NOARGS, |
| buffer_info_doc}, |
| {"byteswap", (PyCFunction)array_byteswap, METH_NOARGS, |
| byteswap_doc}, |
| {"__copy__", (PyCFunction)array_copy, METH_NOARGS, |
| copy_doc}, |
| {"count", (PyCFunction)array_count, METH_O, |
| count_doc}, |
| {"__deepcopy__",(PyCFunction)array_copy, METH_NOARGS, |
| copy_doc}, |
| {"extend", (PyCFunction)array_extend, METH_O, |
| extend_doc}, |
| {"fromfile", (PyCFunction)array_fromfile, METH_VARARGS, |
| fromfile_doc}, |
| {"fromlist", (PyCFunction)array_fromlist, METH_O, |
| fromlist_doc}, |
| {"fromstring", (PyCFunction)array_fromstring, METH_VARARGS, |
| fromstring_doc}, |
| #ifdef Py_USING_UNICODE |
| {"fromunicode", (PyCFunction)array_fromunicode, METH_VARARGS, |
| fromunicode_doc}, |
| #endif |
| {"index", (PyCFunction)array_index, METH_O, |
| index_doc}, |
| {"insert", (PyCFunction)array_insert, METH_VARARGS, |
| insert_doc}, |
| {"pop", (PyCFunction)array_pop, METH_VARARGS, |
| pop_doc}, |
| {"read", (PyCFunction)array_fromfile, METH_VARARGS, |
| fromfile_doc}, |
| {"__reduce__", (PyCFunction)array_reduce, METH_NOARGS, |
| array_doc}, |
| {"remove", (PyCFunction)array_remove, METH_O, |
| remove_doc}, |
| {"reverse", (PyCFunction)array_reverse, METH_NOARGS, |
| reverse_doc}, |
| /* {"sort", (PyCFunction)array_sort, METH_VARARGS, |
| sort_doc},*/ |
| {"tofile", (PyCFunction)array_tofile, METH_O, |
| tofile_doc}, |
| {"tolist", (PyCFunction)array_tolist, METH_NOARGS, |
| tolist_doc}, |
| {"tostring", (PyCFunction)array_tostring, METH_NOARGS, |
| tostring_doc}, |
| #ifdef Py_USING_UNICODE |
| {"tounicode", (PyCFunction)array_tounicode, METH_NOARGS, |
| tounicode_doc}, |
| #endif |
| {"write", (PyCFunction)array_tofile, METH_O, |
| tofile_doc}, |
| {NULL, NULL} /* sentinel */ |
| }; |
| |
| static PyObject * |
| array_repr(arrayobject *a) |
| { |
| char buf[256], typecode; |
| PyObject *s, *t, *v = NULL; |
| Py_ssize_t len; |
| |
| len = a->ob_size; |
| typecode = a->ob_descr->typecode; |
| if (len == 0) { |
| PyOS_snprintf(buf, sizeof(buf), "array('%c')", typecode); |
| return PyString_FromString(buf); |
| } |
| |
| if (typecode == 'c') |
| v = array_tostring(a, NULL); |
| #ifdef Py_USING_UNICODE |
| else if (typecode == 'u') |
| v = array_tounicode(a, NULL); |
| #endif |
| else |
| v = array_tolist(a, NULL); |
| t = PyObject_Repr(v); |
| Py_XDECREF(v); |
| |
| PyOS_snprintf(buf, sizeof(buf), "array('%c', ", typecode); |
| s = PyString_FromString(buf); |
| PyString_ConcatAndDel(&s, t); |
| PyString_ConcatAndDel(&s, PyString_FromString(")")); |
| return s; |
| } |
| |
| static PyObject* |
| array_subscr(arrayobject* self, PyObject* item) |
| { |
| if (PyInt_Check(item)) { |
| Py_ssize_t i = PyInt_AS_LONG(item); |
| if (i < 0) |
| i += self->ob_size; |
| return array_item(self, i); |
| } |
| else if (PyLong_Check(item)) { |
| Py_ssize_t i = PyInt_AsSsize_t(item); |
| if (i == -1 && PyErr_Occurred()) |
| return NULL; |
| if (i < 0) |
| i += self->ob_size; |
| return array_item(self, i); |
| } |
| else if (PySlice_Check(item)) { |
| Py_ssize_t start, stop, step, slicelength, cur, i; |
| PyObject* result; |
| arrayobject* ar; |
| int itemsize = self->ob_descr->itemsize; |
| |
| if (PySlice_GetIndicesEx((PySliceObject*)item, self->ob_size, |
| &start, &stop, &step, &slicelength) < 0) { |
| return NULL; |
| } |
| |
| if (slicelength <= 0) { |
| return newarrayobject(&Arraytype, 0, self->ob_descr); |
| } |
| else { |
| result = newarrayobject(&Arraytype, slicelength, self->ob_descr); |
| if (!result) return NULL; |
| |
| ar = (arrayobject*)result; |
| |
| for (cur = start, i = 0; i < slicelength; |
| cur += step, i++) { |
| memcpy(ar->ob_item + i*itemsize, |
| self->ob_item + cur*itemsize, |
| itemsize); |
| } |
| |
| return result; |
| } |
| } |
| else { |
| PyErr_SetString(PyExc_TypeError, |
| "list indices must be integers"); |
| return NULL; |
| } |
| } |
| |
| static int |
| array_ass_subscr(arrayobject* self, PyObject* item, PyObject* value) |
| { |
| if (PyInt_Check(item)) { |
| Py_ssize_t i = PyInt_AS_LONG(item); |
| if (i < 0) |
| i += self->ob_size; |
| return array_ass_item(self, i, value); |
| } |
| else if (PyLong_Check(item)) { |
| Py_ssize_t i = PyInt_AsSsize_t(item); |
| if (i == -1 && PyErr_Occurred()) |
| return -1; |
| if (i < 0) |
| i += self->ob_size; |
| return array_ass_item(self, i, value); |
| } |
| else if (PySlice_Check(item)) { |
| Py_ssize_t start, stop, step, slicelength; |
| int itemsize = self->ob_descr->itemsize; |
| |
| if (PySlice_GetIndicesEx((PySliceObject*)item, self->ob_size, |
| &start, &stop, &step, &slicelength) < 0) { |
| return -1; |
| } |
| |
| /* treat A[slice(a,b)] = v _exactly_ like A[a:b] = v */ |
| if (step == 1 && ((PySliceObject*)item)->step == Py_None) |
| return array_ass_slice(self, start, stop, value); |
| |
| if (value == NULL) { |
| /* delete slice */ |
| Py_ssize_t cur, i, extra; |
| |
| if (slicelength <= 0) |
| return 0; |
| |
| if (step < 0) { |
| stop = start + 1; |
| start = stop + step*(slicelength - 1) - 1; |
| step = -step; |
| } |
| |
| for (cur = start, i = 0; i < slicelength - 1; |
| cur += step, i++) { |
| memmove(self->ob_item + (cur - i)*itemsize, |
| self->ob_item + (cur + 1)*itemsize, |
| (step - 1) * itemsize); |
| } |
| extra = self->ob_size - (cur + 1); |
| if (extra > 0) { |
| memmove(self->ob_item + (cur - i)*itemsize, |
| self->ob_item + (cur + 1)*itemsize, |
| extra*itemsize); |
| } |
| |
| self->ob_size -= slicelength; |
| self->ob_item = PyMem_REALLOC(self->ob_item, itemsize*self->ob_size); |
| self->allocated = self->ob_size; |
| |
| return 0; |
| } |
| else { |
| /* assign slice */ |
| Py_ssize_t cur, i; |
| arrayobject* av; |
| |
| if (!array_Check(value)) { |
| PyErr_Format(PyExc_TypeError, |
| "must assign array (not \"%.200s\") to slice", |
| value->ob_type->tp_name); |
| return -1; |
| } |
| |
| av = (arrayobject*)value; |
| |
| if (av->ob_size != slicelength) { |
| PyErr_Format(PyExc_ValueError, |
| "attempt to assign array of size %ld to extended slice of size %ld", |
| /*XXX*/(long)av->ob_size, /*XXX*/(long)slicelength); |
| return -1; |
| } |
| |
| if (!slicelength) |
| return 0; |
| |
| /* protect against a[::-1] = a */ |
| if (self == av) { |
| value = array_slice(av, 0, av->ob_size); |
| av = (arrayobject*)value; |
| } |
| else { |
| Py_INCREF(value); |
| } |
| |
| for (cur = start, i = 0; i < slicelength; |
| cur += step, i++) { |
| memcpy(self->ob_item + cur*itemsize, |
| av->ob_item + i*itemsize, |
| itemsize); |
| } |
| |
| Py_DECREF(value); |
| |
| return 0; |
| } |
| } |
| else { |
| PyErr_SetString(PyExc_TypeError, |
| "list indices must be integers"); |
| return -1; |
| } |
| } |
| |
| static PyMappingMethods array_as_mapping = { |
| (lenfunc)array_length, |
| (binaryfunc)array_subscr, |
| (objobjargproc)array_ass_subscr |
| }; |
| |
| static Py_ssize_t |
| array_buffer_getreadbuf(arrayobject *self, Py_ssize_t index, const void **ptr) |
| { |
| if ( index != 0 ) { |
| PyErr_SetString(PyExc_SystemError, |
| "Accessing non-existent array segment"); |
| return -1; |
| } |
| *ptr = (void *)self->ob_item; |
| return self->ob_size*self->ob_descr->itemsize; |
| } |
| |
| static Py_ssize_t |
| array_buffer_getwritebuf(arrayobject *self, Py_ssize_t index, const void **ptr) |
| { |
| if ( index != 0 ) { |
| PyErr_SetString(PyExc_SystemError, |
| "Accessing non-existent array segment"); |
| return -1; |
| } |
| *ptr = (void *)self->ob_item; |
| return self->ob_size*self->ob_descr->itemsize; |
| } |
| |
| static Py_ssize_t |
| array_buffer_getsegcount(arrayobject *self, Py_ssize_t *lenp) |
| { |
| if ( lenp ) |
| *lenp = self->ob_size*self->ob_descr->itemsize; |
| return 1; |
| } |
| |
| static PySequenceMethods array_as_sequence = { |
| (lenfunc)array_length, /*sq_length*/ |
| (binaryfunc)array_concat, /*sq_concat*/ |
| (ssizeargfunc)array_repeat, /*sq_repeat*/ |
| (ssizeargfunc)array_item, /*sq_item*/ |
| (ssizessizeargfunc)array_slice, /*sq_slice*/ |
| (ssizeobjargproc)array_ass_item, /*sq_ass_item*/ |
| (ssizessizeobjargproc)array_ass_slice, /*sq_ass_slice*/ |
| (objobjproc)array_contains, /*sq_contains*/ |
| (binaryfunc)array_inplace_concat, /*sq_inplace_concat*/ |
| (ssizeargfunc)array_inplace_repeat /*sq_inplace_repeat*/ |
| }; |
| |
| static PyBufferProcs array_as_buffer = { |
| (readbufferproc)array_buffer_getreadbuf, |
| (writebufferproc)array_buffer_getwritebuf, |
| (segcountproc)array_buffer_getsegcount, |
| }; |
| |
| static PyObject * |
| array_new(PyTypeObject *type, PyObject *args, PyObject *kwds) |
| { |
| char c; |
| PyObject *initial = NULL, *it = NULL; |
| struct arraydescr *descr; |
| |
| if (!_PyArg_NoKeywords("array.array()", kwds)) |
| return NULL; |
| |
| if (!PyArg_ParseTuple(args, "c|O:array", &c, &initial)) |
| return NULL; |
| |
| if (!(initial == NULL || PyList_Check(initial) |
| || PyString_Check(initial) || PyTuple_Check(initial) |
| || (c == 'u' && PyUnicode_Check(initial)))) { |
| it = PyObject_GetIter(initial); |
| if (it == NULL) |
| return NULL; |
| /* We set initial to NULL so that the subsequent code |
| will create an empty array of the appropriate type |
| and afterwards we can use array_iter_extend to populate |
| the array. |
| */ |
| initial = NULL; |
| } |
| for (descr = descriptors; descr->typecode != '\0'; descr++) { |
| if (descr->typecode == c) { |
| PyObject *a; |
| Py_ssize_t len; |
| |
| if (initial == NULL || !(PyList_Check(initial) |
| || PyTuple_Check(initial))) |
| len = 0; |
| else |
| len = PySequence_Size(initial); |
| |
| a = newarrayobject(type, len, descr); |
| if (a == NULL) |
| return NULL; |
| |
| if (len > 0) { |
| Py_ssize_t i; |
| for (i = 0; i < len; i++) { |
| PyObject *v = |
| PySequence_GetItem(initial, i); |
| if (v == NULL) { |
| Py_DECREF(a); |
| return NULL; |
| } |
| if (setarrayitem(a, i, v) != 0) { |
| Py_DECREF(v); |
| Py_DECREF(a); |
| return NULL; |
| } |
| Py_DECREF(v); |
| } |
| } else if (initial != NULL && PyString_Check(initial)) { |
| PyObject *t_initial = PyTuple_Pack(1, |
| initial); |
| PyObject *v = |
| array_fromstring((arrayobject *)a, |
| t_initial); |
| Py_DECREF(t_initial); |
| if (v == NULL) { |
| Py_DECREF(a); |
| return NULL; |
| } |
| Py_DECREF(v); |
| #ifdef Py_USING_UNICODE |
| } else if (initial != NULL && PyUnicode_Check(initial)) { |
| Py_ssize_t n = PyUnicode_GET_DATA_SIZE(initial); |
| if (n > 0) { |
| arrayobject *self = (arrayobject *)a; |
| char *item = self->ob_item; |
| item = PyMem_Realloc(item, n); |
| if (item == NULL) { |
| PyErr_NoMemory(); |
| Py_DECREF(a); |
| return NULL; |
| } |
| self->ob_item = item; |
| self->ob_size = n / sizeof(Py_UNICODE); |
| memcpy(item, PyUnicode_AS_DATA(initial), n); |
| self->allocated = self->ob_size; |
| } |
| #endif |
| } |
| if (it != NULL) { |
| if (array_iter_extend((arrayobject *)a, it) == -1) { |
| Py_DECREF(it); |
| Py_DECREF(a); |
| return NULL; |
| } |
| Py_DECREF(it); |
| } |
| return a; |
| } |
| } |
| PyErr_SetString(PyExc_ValueError, |
| "bad typecode (must be c, b, B, u, h, H, i, I, l, L, f or d)"); |
| return NULL; |
| } |
| |
| |
| PyDoc_STRVAR(module_doc, |
| "This module defines an object type which can efficiently represent\n\ |
| an array of basic values: characters, integers, floating point\n\ |
| numbers. Arrays are sequence types and behave very much like lists,\n\ |
| except that the type of objects stored in them is constrained. The\n\ |
| type is specified at object creation time by using a type code, which\n\ |
| is a single character. The following type codes are defined:\n\ |
| \n\ |
| Type code C Type Minimum size in bytes \n\ |
| 'c' character 1 \n\ |
| 'b' signed integer 1 \n\ |
| 'B' unsigned integer 1 \n\ |
| 'u' Unicode character 2 \n\ |
| 'h' signed integer 2 \n\ |
| 'H' unsigned integer 2 \n\ |
| 'i' signed integer 2 \n\ |
| 'I' unsigned integer 2 \n\ |
| 'l' signed integer 4 \n\ |
| 'L' unsigned integer 4 \n\ |
| 'f' floating point 4 \n\ |
| 'd' floating point 8 \n\ |
| \n\ |
| The constructor is:\n\ |
| \n\ |
| array(typecode [, initializer]) -- create a new array\n\ |
| "); |
| |
| PyDoc_STRVAR(arraytype_doc, |
| "array(typecode [, initializer]) -> array\n\ |
| \n\ |
| Return a new array whose items are restricted by typecode, and\n\ |
| initialized from the optional initializer value, which must be a list,\n\ |
| string. or iterable over elements of the appropriate type.\n\ |
| \n\ |
| Arrays represent basic values and behave very much like lists, except\n\ |
| the type of objects stored in them is constrained.\n\ |
| \n\ |
| Methods:\n\ |
| \n\ |
| append() -- append a new item to the end of the array\n\ |
| buffer_info() -- return information giving the current memory info\n\ |
| byteswap() -- byteswap all the items of the array\n\ |
| count() -- return number of occurences of an object\n\ |
| extend() -- extend array by appending multiple elements from an iterable\n\ |
| fromfile() -- read items from a file object\n\ |
| fromlist() -- append items from the list\n\ |
| fromstring() -- append items from the string\n\ |
| index() -- return index of first occurence of an object\n\ |
| insert() -- insert a new item into the array at a provided position\n\ |
| pop() -- remove and return item (default last)\n\ |
| read() -- DEPRECATED, use fromfile()\n\ |
| remove() -- remove first occurence of an object\n\ |
| reverse() -- reverse the order of the items in the array\n\ |
| tofile() -- write all items to a file object\n\ |
| tolist() -- return the array converted to an ordinary list\n\ |
| tostring() -- return the array converted to a string\n\ |
| write() -- DEPRECATED, use tofile()\n\ |
| \n\ |
| Attributes:\n\ |
| \n\ |
| typecode -- the typecode character used to create the array\n\ |
| itemsize -- the length in bytes of one array item\n\ |
| "); |
| |
| static PyObject *array_iter(arrayobject *ao); |
| |
| static PyTypeObject Arraytype = { |
| PyObject_HEAD_INIT(NULL) |
| 0, |
| "array.array", |
| sizeof(arrayobject), |
| 0, |
| (destructor)array_dealloc, /* tp_dealloc */ |
| 0, /* tp_print */ |
| 0, /* tp_getattr */ |
| 0, /* tp_setattr */ |
| 0, /* tp_compare */ |
| (reprfunc)array_repr, /* tp_repr */ |
| 0, /* tp_as _number*/ |
| &array_as_sequence, /* tp_as _sequence*/ |
| &array_as_mapping, /* tp_as _mapping*/ |
| 0, /* tp_hash */ |
| 0, /* tp_call */ |
| 0, /* tp_str */ |
| PyObject_GenericGetAttr, /* tp_getattro */ |
| 0, /* tp_setattro */ |
| &array_as_buffer, /* tp_as_buffer*/ |
| Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE | Py_TPFLAGS_HAVE_WEAKREFS, /* tp_flags */ |
| arraytype_doc, /* tp_doc */ |
| 0, /* tp_traverse */ |
| 0, /* tp_clear */ |
| array_richcompare, /* tp_richcompare */ |
| offsetof(arrayobject, weakreflist), /* tp_weaklistoffset */ |
| (getiterfunc)array_iter, /* tp_iter */ |
| 0, /* tp_iternext */ |
| array_methods, /* tp_methods */ |
| 0, /* tp_members */ |
| array_getsets, /* tp_getset */ |
| 0, /* tp_base */ |
| 0, /* tp_dict */ |
| 0, /* tp_descr_get */ |
| 0, /* tp_descr_set */ |
| 0, /* tp_dictoffset */ |
| 0, /* tp_init */ |
| PyType_GenericAlloc, /* tp_alloc */ |
| array_new, /* tp_new */ |
| PyObject_Del, /* tp_free */ |
| }; |
| |
| |
| /*********************** Array Iterator **************************/ |
| |
| typedef struct { |
| PyObject_HEAD |
| Py_ssize_t index; |
| arrayobject *ao; |
| PyObject * (*getitem)(struct arrayobject *, Py_ssize_t); |
| } arrayiterobject; |
| |
| static PyTypeObject PyArrayIter_Type; |
| |
| #define PyArrayIter_Check(op) PyObject_TypeCheck(op, &PyArrayIter_Type) |
| |
| static PyObject * |
| array_iter(arrayobject *ao) |
| { |
| arrayiterobject *it; |
| |
| if (!array_Check(ao)) { |
| PyErr_BadInternalCall(); |
| return NULL; |
| } |
| |
| it = PyObject_GC_New(arrayiterobject, &PyArrayIter_Type); |
| if (it == NULL) |
| return NULL; |
| |
| Py_INCREF(ao); |
| it->ao = ao; |
| it->index = 0; |
| it->getitem = ao->ob_descr->getitem; |
| PyObject_GC_Track(it); |
| return (PyObject *)it; |
| } |
| |
| static PyObject * |
| arrayiter_next(arrayiterobject *it) |
| { |
| assert(PyArrayIter_Check(it)); |
| if (it->index < it->ao->ob_size) |
| return (*it->getitem)(it->ao, it->index++); |
| return NULL; |
| } |
| |
| static void |
| arrayiter_dealloc(arrayiterobject *it) |
| { |
| PyObject_GC_UnTrack(it); |
| Py_XDECREF(it->ao); |
| PyObject_GC_Del(it); |
| } |
| |
| static int |
| arrayiter_traverse(arrayiterobject *it, visitproc visit, void *arg) |
| { |
| if (it->ao != NULL) |
| return visit((PyObject *)(it->ao), arg); |
| return 0; |
| } |
| |
| static PyTypeObject PyArrayIter_Type = { |
| PyObject_HEAD_INIT(NULL) |
| 0, /* ob_size */ |
| "arrayiterator", /* tp_name */ |
| sizeof(arrayiterobject), /* tp_basicsize */ |
| 0, /* tp_itemsize */ |
| /* methods */ |
| (destructor)arrayiter_dealloc, /* tp_dealloc */ |
| 0, /* tp_print */ |
| 0, /* tp_getattr */ |
| 0, /* tp_setattr */ |
| 0, /* tp_compare */ |
| 0, /* tp_repr */ |
| 0, /* tp_as_number */ |
| 0, /* tp_as_sequence */ |
| 0, /* tp_as_mapping */ |
| 0, /* tp_hash */ |
| 0, /* tp_call */ |
| 0, /* tp_str */ |
| PyObject_GenericGetAttr, /* tp_getattro */ |
| 0, /* tp_setattro */ |
| 0, /* tp_as_buffer */ |
| Py_TPFLAGS_DEFAULT | Py_TPFLAGS_HAVE_GC,/* tp_flags */ |
| 0, /* tp_doc */ |
| (traverseproc)arrayiter_traverse, /* tp_traverse */ |
| 0, /* tp_clear */ |
| 0, /* tp_richcompare */ |
| 0, /* tp_weaklistoffset */ |
| PyObject_SelfIter, /* tp_iter */ |
| (iternextfunc)arrayiter_next, /* tp_iternext */ |
| 0, /* tp_methods */ |
| }; |
| |
| |
| /*********************** Install Module **************************/ |
| |
| /* No functions in array module. */ |
| static PyMethodDef a_methods[] = { |
| {NULL, NULL, 0, NULL} /* Sentinel */ |
| }; |
| |
| |
| PyMODINIT_FUNC |
| initarray(void) |
| { |
| PyObject *m; |
| |
| Arraytype.ob_type = &PyType_Type; |
| PyArrayIter_Type.ob_type = &PyType_Type; |
| m = Py_InitModule3("array", a_methods, module_doc); |
| if (m == NULL) |
| return; |
| |
| Py_INCREF((PyObject *)&Arraytype); |
| PyModule_AddObject(m, "ArrayType", (PyObject *)&Arraytype); |
| Py_INCREF((PyObject *)&Arraytype); |
| PyModule_AddObject(m, "array", (PyObject *)&Arraytype); |
| /* No need to check the error here, the caller will do that */ |
| } |