########################################################################
# Copyright (c) 2000, BeOpen.com.
# Copyright (c) 1995-2000, Corporation for National Research Initiatives.
# Copyright (c) 1990-1995, Stichting Mathematisch Centrum.
# All rights reserved.
# 
# See the file "Misc/COPYRIGHT" for information on usage and
# redistribution of this file, and for a DISCLAIMER OF ALL WARRANTIES.
########################################################################

# Top-level Makefile for Python
# 
# As distributed, this file is called Makefile.in; it is processed
# into the real Makefile by running the script ./configure, which
# replaces things like @spam@ with values appropriate for your system.
# This means that if you edit Makefile, your changes get lost the next
# time you run the configure script.  Ideally, you can do:
# 
#	./configure
#	make
#	make test
#	make install
# 
# The top-level Makefile invokes make recursively in a number of
# subdirectories (see the SUBDIRS variable below).  If you want to,
# you can invoke make in individual subdirectories.  However, the
# sub-Makefiles are also generated by configure, and the quickest way
# to make sure they are up to date is by running make (or "make
# Makefiles") at the top level.  This is particularly important for
# Modules/Makefile, which has to be regenerated every time you edit
# Modules/Setup.  The python executable is built in the Modules
# directory and then moved to the top-level directory.  The recursive
# makes pass three options to subordinate makes: OPT (a quick way to
# change some compiler options; it usually defaults to -O), prefix and
# exec_prefix (the installation paths).
# 
# If you have a previous version of Python installed that you don't
# want to overwrite, you can use "make altinstall" instead of "make
# install".  This changes the install procedure so it installs the
# Python binary as "python<version>".  The libraries and include files
# are always installed in a subdirectory called "python<version>".
# "make altinstall" does not install the manual page.  If you want to
# make this installation the "official" installation but want to keep
# the old binary around "just in case", rename the installed python
# binary to "python<oldversion>" before running "make install".
# (This only works between different versions, e.g. 1.3 and 1.4 --
# different betas of the same version will overwrite each other in
# installation unless you override the VERSION Make variable.)
# 
# In fact, "make install" or "make bininstall" installs the binary
# as python<version> and makes a hard link to python, so when
# installing a new version in the future, nothing of the current
# version will be lost (except for the man page).
# 
# If recursive makes fail, try invoking make as "make MAKE=make".
# 
# See also the section "Build instructions" in the README file.

# Substitutions by configure
VERSION=	@VERSION@
srcdir=		@srcdir@
VPATH=		@srcdir@
CC=		@CC@
AR=		@AR@
RANLIB=		@RANLIB@
DEFS=		@DEFS@

# Machine-dependent subdirectories
MACHDEP=	@MACHDEP@

# Install prefix for architecture-independent files
prefix=		@prefix@

# Install prefix for architecture-dependent files
exec_prefix=	@exec_prefix@

# Expanded directories
BINDIR=		$(exec_prefix)/bin
LIBDIR=		$(exec_prefix)/lib
MANDIR=		$(prefix)/man
INCLUDEDIR=	$(prefix)/include
CONFINCLUDEDIR=	$(exec_prefix)/include
SCRIPTDIR=	$(prefix)/lib

# Detailed destination directories
BINLIBDEST=	$(LIBDIR)/python$(VERSION)
LIBDEST=	$(SCRIPTDIR)/python$(VERSION)
INCLUDEPY=	$(INCLUDEDIR)/python$(VERSION)
CONFINCLUDEPY=	$(CONFINCLUDEDIR)/python$(VERSION)
LIBP=		$(LIBDIR)/python$(VERSION)

# Symbols used for using shared libraries
SO=		@SO@
LDSHARED=	@LDSHARED@
CCSHARED=	@CCSHARED@
LINKFORSHARED=	@LINKFORSHARED@
DESTSHARED=	$(BINLIBDEST)/lib-dynload

# Shell used by make (some versions default to the login shell, which is bad)
SHELL=		/bin/sh

# Use ``EXE=.exe'' for Unix emulations on DOS/Windows (e.g. GNUWIN32)
EXE=

# Modes for directories, executables and data files created by the
# install process.  Default to group-writable directories but
# user-only-writable for executables and data files.
DIRMODE=	775
EXEMODE=	755
FILEMODE=	644

# Portable install script (configure doesn't always guess right)
INSTALL=	@srcdir@/install-sh -c
INSTALL_PROGRAM=${INSTALL} -m $(EXEMODE)
INSTALL_DATA=	${INSTALL} -m $(FILEMODE)

# Use this to make a link between python$(VERSION) and python in $(BINDIR)
LN=@LN@

# --with-PACKAGE options for configure script
# e.g. --with-readline --with-svr5 --with-solaris --with-thread
# (see README for an explanation)
WITH=		

# Compiler options passed to subordinate makes
OPT=		@OPT@

# Subdirectories where to run make recursively
SUBDIRS=	Parser Grammar Objects Python Modules

# Other subdirectories
SUBDIRSTOO=	Include Lib Misc Demo

# Files and directories to be distributed
CONFIGFILES=	configure configure.in acconfig.h config.h.in Makefile.in
DISTFILES=	README ChangeLog $(CONFIGFILES)
DISTDIRS=	$(SUBDIRS) $(SUBDIRSTOO) Ext-dummy
DIST=		$(DISTFILES) $(DISTDIRS)

# Compilation flags for getbuildinfo.c only
CFLAGS=		$(OPT) -I. $(DEFS)

LIBRARY=	libpython$(VERSION).a
LDLIBRARY=      @LDLIBRARY@

# Default target
all:		$(LIBRARY) python$(EXE) sharedmods

# Build the interpreter
python$(EXE):		$(LIBRARY) buildno Modules/python.o
		expr `cat buildno` + 1 >buildno1
		mv -f buildno1 buildno
		$(CC) -c $(CFLAGS) -DBUILD=`cat buildno` \
		      $(srcdir)/Modules/getbuildinfo.c
		$(AR) cr $(LIBRARY) getbuildinfo.o
		$(RANLIB) $(LIBRARY)
		@MAKE_LDLIBRARY@
		cd Modules;  $(MAKE) OPT="$(OPT)" VERSION="$(VERSION)" \
			prefix="$(prefix)" exec_prefix="$(exec_prefix)" \
			LIBRARY=../$(LDLIBRARY) link

Modules/python.o: $(srcdir)/Modules/python.c
		cd Modules; $(MAKE) OPT="$(OPT)" python.o

buildno:
		echo 0 >buildno

# Build the shared modules
sharedmods: 	python$(EXE)
		cd Modules;  $(MAKE) OPT="$(OPT)" VERSION="$(VERSION)" \
			prefix="$(prefix)" exec_prefix="$(exec_prefix)" \
			sharedmods

# Build the library
$(LIBRARY):	$(SUBDIRS)
		if test ! -f $(LIBRARY); \
		then for i in $(SUBDIRS); do rm -f $$i/add2lib; done; true; \
		else true; fi
		for i in $(SUBDIRS); do \
			(cd $$i; $(MAKE) VERSION="$(VERSION)" add2lib); done

# This rule is only here for DG/UX!!!
libpython$(VERSION).so:	$(LIBRARY)
		case `uname -s | tr -d '/ ' | tr '[A-Z]' '[a-z]'` in \
		*dgux*) \
		    test -d dgux || mkdir dgux; \
		    (cd dgux;ar x ../$^;ld -G -o ../$@ * ); \
		    /bin/rm -rf ./dgux \
		    ;; \
		esac

# This rule is here for OPENSTEP/Rhapsody/MacOSX
libpython$(VERSION).dylib: $(LIBRARY)
		libtool -o $(LDLIBRARY) -dynamic $(OTHER_LIBTOOL_OPT) $(LIBRARY) -framework System @LIBTOOL_CRUFT@ 

$(SUBDIRS):	Makefiles

Grammar:
		cd Grammar ; $(MAKE) OPT="$(OPT)" VERSION="$(VERSION)" \
			prefix="$(prefix)" exec_prefix="$(exec_prefix)" all

Parser:
		cd Parser ; $(MAKE) OPT="$(OPT)" VERSION="$(VERSION)" \
			prefix="$(prefix)" exec_prefix="$(exec_prefix)" all

Python:
		cd Python ; $(MAKE) OPT="$(OPT)" VERSION="$(VERSION)" \
			prefix="$(prefix)" exec_prefix="$(exec_prefix)" all

Objects:
		cd Objects ; $(MAKE) OPT="$(OPT)" VERSION="$(VERSION)" \
			prefix="$(prefix)" exec_prefix="$(exec_prefix)" all

Modules:	Parser Python Objects
		cd Modules ; $(MAKE) OPT="$(OPT)" VERSION="$(VERSION)" \
			prefix="$(prefix)" exec_prefix="$(exec_prefix)" all

# Test the interpreter (twice, once without .pyc files, once with)
TESTOPTS=	-l
TESTPROG=	$(srcdir)/Lib/test/regrtest.py
TESTPYTHON=	./python$(EXE) -tt
test:		all
		-rm -f $(srcdir)/Lib/test/*.py[co]
		-PYTHONPATH= $(TESTPYTHON) $(TESTPROG) $(TESTOPTS)
		PYTHONPATH= $(TESTPYTHON) $(TESTPROG) $(TESTOPTS)

# Install everything
install:	altinstall bininstall maninstall

# Install almost everything without disturbing previous versions
altinstall:	altbininstall libinstall inclinstall libainstall sharedinstall

# Install the interpreter (by creating a hard link to python$(VERSION))
bininstall:	altbininstall
		-if test -f $(BINDIR)/python$(EXE); \
		then rm -f $(BINDIR)/python$(EXE); \
		else true; \
		fi
		(cd $(BINDIR); $(LN) python$(VERSION)$(EXE) python$(EXE))

# Install the interpreter with $(VERSION) affixed
# This goes into $(exec_prefix)
altbininstall:	python$(EXE)
		@for i in $(BINDIR); \
		do \
			if test ! -d $$i; then \
				echo "Creating directory $$i"; \
				mkdir $$i; \
				chmod $(DIRMODE) $$i; \
			else	true; \
			fi; \
		done
		$(INSTALL_PROGRAM) python$(EXE) $(BINDIR)/python$(VERSION)$(EXE)
		if test -f libpython$(VERSION).so; then \
			$(INSTALL_DATA) libpython$(VERSION).so $(LIBDIR); \
		else	true; \
		fi

# Install the manual page
maninstall:
		@for i in $(MANDIR) $(MANDIR)/man1; \
		do \
			if test ! -d $$i; then \
				echo "Creating directory $$i"; \
				mkdir $$i; \
				chmod $(DIRMODE) $$i; \
			else	true; \
			fi; \
		done
		$(INSTALL_DATA) $(srcdir)/Misc/python.man \
			$(MANDIR)/man1/python.1

# Install the library
PLATDIR=	plat-$(MACHDEP)
MACHDEPS=	$(PLATDIR)
XMLLIBSUBDIRS=  xml xml/dom xml/parser xml/sax
LIBSUBDIRS=	lib-old lib-tk site-packages test test/output encodings \
		distutils distutils/command $(XMLLIBSUBDIRS) curses $(MACHDEPS)
libinstall:	python $(srcdir)/Lib/$(PLATDIR)
		@for i in $(SCRIPTDIR) $(LIBDEST); \
		do \
			if test ! -d $$i; then \
				echo "Creating directory $$i"; \
				mkdir $$i; \
				chmod $(DIRMODE) $$i; \
			else	true; \
			fi; \
		done
		@for d in $(LIBSUBDIRS); \
		do \
			a=$(srcdir)/Lib/$$d; \
			if test ! -d $$a; then continue; else true; fi; \
			b=$(LIBDEST)/$$d; \
			if test ! -d $$b; then \
				echo "Creating directory $$b"; \
				mkdir $$b; \
				chmod $(DIRMODE) $$b; \
			else	true; \
			fi; \
		done
		@for i in $(srcdir)/Lib/*.py $(srcdir)/Lib/*.doc; \
		do \
			if test -x $$i; then \
				$(INSTALL_PROGRAM) $$i $(LIBDEST); \
				echo $(INSTALL_PROGRAM) $$i $(LIBDEST); \
			else \
				$(INSTALL_DATA) $$i $(LIBDEST); \
				echo $(INSTALL_DATA) $$i $(LIBDEST); \
			fi; \
		done
		@for d in $(LIBSUBDIRS); \
		do \
			a=$(srcdir)/Lib/$$d; \
			if test ! -d $$a; then continue; else true; fi; \
			b=$(LIBDEST)/$$d; \
			for i in $$a/*; \
			do \
				case $$i in \
				*CVS) ;; \
				*.py[co]) ;; \
				*~) ;; \
				*) \
					if test -d $$i; then continue; fi; \
					if test -x $$i; then \
					    echo $(INSTALL_PROGRAM) $$i $$b; \
					    $(INSTALL_PROGRAM) $$i $$b; \
					else \
					    echo $(INSTALL_DATA) $$i $$b; \
					    $(INSTALL_DATA) $$i $$b; \
					fi;; \
				esac; \
			done; \
		done
		PYTHONPATH=$(LIBDEST) \
			./python$(EXE) -tt $(LIBDEST)/compileall.py $(LIBDEST)
		PYTHONPATH=$(LIBDEST) \
			./python$(EXE) -O $(LIBDEST)/compileall.py $(LIBDEST)

# Create the PLATDIR source directory, if one wasn't distributed..
$(srcdir)/Lib/$(PLATDIR):
		mkdir $(srcdir)/Lib/$(PLATDIR)
		cp $(srcdir)/Lib/plat-generic/regen $(srcdir)/Lib/$(PLATDIR)/regen
		export PATH; PATH="`pwd`:$$PATH"; \
		export PYTHONPATH; PYTHONPATH="`pwd`/Lib"; \
		cd $(srcdir)/Lib/$(PLATDIR); ./regen

# Install the include files
INCLDIRSTOMAKE=$(INCLUDEDIR) $(CONFINCLUDEDIR) $(INCLUDEPY) $(CONFINCLUDEPY)
inclinstall:
		@for i in $(INCLDIRSTOMAKE); \
		do \
			if test ! -d $$i; then \
				echo "Creating directory $$i"; \
				mkdir $$i; \
				chmod $(DIRMODE) $$i; \
			else	true; \
			fi; \
		done
		@for i in $(srcdir)/Include/*.h; \
		do \
			echo $(INSTALL_DATA) $$i $(INCLUDEPY); \
			$(INSTALL_DATA) $$i $(INCLUDEPY); \
		done
		$(INSTALL_DATA) config.h $(CONFINCLUDEPY)/config.h

# Install the library and miscellaneous stuff needed for extending/embedding
# This goes into $(exec_prefix)
LIBPL=		$(LIBP)/config
libainstall:	all
		@for i in $(LIBDIR) $(LIBP) $(LIBPL); \
		do \
			if test ! -d $$i; then \
				echo "Creating directory $$i"; \
				mkdir $$i; \
				chmod $(DIRMODE) $$i; \
			else	true; \
			fi; \
		done
		@if [ "$(MACHDEP)" != "beos" ] ; then \
			$(INSTALL_DATA) $(LIBRARY) $(LIBPL)/$(LIBRARY) ; \
			$(RANLIB) $(LIBPL)/$(LIBRARY) ; \
		fi
		$(INSTALL_DATA) Modules/config.c $(LIBPL)/config.c
		$(INSTALL_DATA) Modules/python.o $(LIBPL)/python.o
		$(INSTALL_DATA) $(srcdir)/Modules/config.c.in $(LIBPL)/config.c.in
		$(INSTALL_DATA) Modules/Makefile $(LIBPL)/Makefile
		$(INSTALL_DATA) Modules/Setup $(LIBPL)/Setup
		$(INSTALL_DATA) Modules/Setup.local $(LIBPL)/Setup.local
		$(INSTALL_DATA) Modules/Setup.config $(LIBPL)/Setup.config
		$(INSTALL_PROGRAM) $(srcdir)/Modules/makesetup $(LIBPL)/makesetup
		$(INSTALL_PROGRAM) $(srcdir)/install-sh $(LIBPL)/install-sh
		$(INSTALL_DATA) $(srcdir)/Misc/Makefile.pre.in $(LIBPL)/Makefile.pre.in
		@if [ -s Modules/python.exp -a \
			"`echo $(MACHDEP) | sed 's/^\(...\).*/\1/'`" = "aix" ]; then \
			echo; echo "Installing support files for building shared extension modules on AIX:"; \
			$(INSTALL_DATA) Modules/python.exp		\
					$(LIBPL)/python.exp;		\
			echo; echo "$(LIBPL)/python.exp";		\
			$(INSTALL_PROGRAM) $(srcdir)/Modules/makexp_aix	\
					$(LIBPL)/makexp_aix;		\
			echo "$(LIBPL)/makexp_aix";			\
			$(INSTALL_PROGRAM) $(srcdir)/Modules/ld_so_aix	\
					$(LIBPL)/ld_so_aix;		\
			echo "$(LIBPL)/ld_so_aix";			\
			echo; echo "See Misc/AIX-NOTES for details.";	\
		else true; \
		fi
		@if [ "$(MACHDEP)" == "beos" ] ; then \
			echo; echo "Installing support files for building shared extension modules on BeOS:"; \
			$(INSTALL_DATA) BeOS/README $(LIBPL)/README;	\
			echo; echo "$(LIBPL)/README";			\
			$(INSTALL_DATA) BeOS/README.readline-2.2 $(LIBPL)/README.readline-2.2; \
			echo "$(LIBPL)/README.readline-2.2";		\
			$(INSTALL_DATA) BeOS/dl_export.h $(LIBPL)/dl_export.h; \
			echo "$(LIBPL)/dl_export.h";			\
			$(INSTALL_PROGRAM) BeOS/ar-fake $(LIBPL)/ar-fake; \
			echo "$(LIBPL)/ar-fake";			\
			$(INSTALL_PROGRAM) BeOS/linkcc $(LIBPL)/linkcc; \
			echo "$(LIBPL)/linkcc";				\
			$(INSTALL_PROGRAM) BeOS/linkmodule $(LIBPL)/linkmodule; \
			echo "$(LIBPL)/linkmodule";			\
			echo; echo "See BeOS/README for details.";	\
		else true; \
		fi

# Install the dynamically loadable modules
# This goes into $(exec_prefix)
sharedinstall:
		cd Modules; $(MAKE) \
			OPT="$(OPT)" \
			VERSION="$(VERSION)" \
			SO="$(SO)" \
			LDSHARED="$(LDSHARED)" \
			CCSHARED="$(CCSHARED)" \
			LINKFORSHARED="$(LINKFORSHARED)" \
			DESTSHARED="$(DESTSHARED)" \
			prefix="$(prefix)" \
			exec_prefix="$(exec_prefix)" \
			sharedinstall

# Build the sub-Makefiles
Makefiles:	config.status Modules/Makefile.pre
		(cd Modules; $(MAKE) -f Makefile.pre Makefile)
		@for i in . $(SUBDIRS); do \
			(echo making Makefile in subdirectory $$i; cd $$i; \
			 $(MAKE) Makefile); \
		done
		-(rm -f Modules/hassignal; cd Modules; $(MAKE) hassignal)

# Build the intermediate Makefile in Modules
Modules/Makefile.pre: config.status
		$(SHELL) config.status

# Build the toplevel Makefile
Makefile:	Makefile.in config.status
		CONFIG_FILES=Makefile CONFIG_HEADERS= $(SHELL) config.status

# Run the configure script.  If config.status already exists,
# call it with the --recheck argument, which reruns configure with the
# same options as it was run last time; otherwise run the configure
# script with options taken from the $(WITH) variable
config.status:	$(srcdir)/configure
		if test -f config.status; \
		then $(SHELL) config.status --recheck; \
		     $(SHELL) config.status; \
		else $(SHELL) $(srcdir)/configure $(WITH); \
		fi

.PRECIOUS:	config.status python$(EXE)

# Rerun configure with the same options as it was run last time,
# provided the config.status script exists
recheck:
		$(SHELL) config.status --recheck
		$(SHELL) config.status

# Rebuild the configure script from configure.in; also rebuild config.h.in
autoconf:
		(cd $(srcdir); autoconf)
		(cd $(srcdir); autoheader)

# Create a tags file for vi
tags::
		cd $(srcdir); \
		ctags -w -t Include/*.h; \
		for i in $(SUBDIRS); do ctags -w -t -a $$i/*.[ch]; \
		done; \
		sort tags -o tags

# Create a tags file for GNU Emacs
TAGS::
		cd $(srcdir); \
		etags Include/*.h; \
		for i in $(SUBDIRS); do etags -a $$i/*.[ch]; done

# Add dependencies to sub-Makefiles
depend:
		@for i in $(SUBDIRS); do \
			(echo making depend in subdirectory $$i; cd $$i; \
			 $(MAKE) depend); \
		done

# Sanitation targets -- clean leaves libraries, executables and tags
# files, which clobber removes those as well

localclean:
		-rm -f core *~ [@,#]* *.old *.orig *.rej

clean:		localclean
		-for i in $(SUBDIRS); do \
		    if test -d $$i; then \
			(echo making clean in subdirectory $$i; cd $$i; \
			 if test -f Makefile; \
			 then $(MAKE) clean; \
			 else $(MAKE) -f Makefile.*in clean; \
			 fi); \
		    else true; fi; \
		done

localclobber:	localclean
		-rm -f tags TAGS python$(EXE) $(LIBRARY) $(LDLIBRARY) *.o
		-rm -f config.log config.cache config.h

clobber:	localclobber
		-for i in $(SUBDIRS); do \
		    if test -d $$i; then \
			(echo clobbering subdirectory $$i; cd $$i; \
			 if test -f Makefile; \
			 then $(MAKE) clobber; \
			 else $(MAKE) -f $(srcdir)/Makefile*.in clobber; \
			 fi); \
		    else true; fi; \
		done

# Make things extra clean, before making a distribution:
# remove all generated files, even Makefile[.pre]
distclean:	clobber
		-$(MAKE) -f $(srcdir)/Makefile.in \
			SUBDIRS="$(SUBDIRSTOO)" clobber
		-rm -f config.status config.log config.cache config.h Makefile
		-rm -f buildno
		-rm -f Modules/Makefile
		-for i in $(SUBDIRS) $(SUBDIRSTOO); do \
			 for f in $$i/*.in; do \
				f=`basename "$$f" .in`; \
			 	if test "$$f" != "*"; then \
					echo rm -f "$$i/$$f"; \
				 	rm -f "$$i/$$f"; \
				fi; \
			 done; \
		done

# Check for smelly exported symbols (not starting with Py/_Py)
smelly: all
	for i in $(SUBDIRS); do \
		echo --- $$i ---; \
		nm -p $$i/lib$$i.a | \
		sed -n "/ [TDB] /s/.* //p" | grep -v "^_*Py" | sort -u; \
	done

# Find files with funny names
funny:
		find $(DISTDIRS) -type d \
			-o -name '*.[chs]' \
			-o -name '*.py' \
			-o -name '*.doc' \
			-o -name '*.sty' \
			-o -name '*.bib' \
			-o -name '*.dat' \
			-o -name '*.el' \
			-o -name '*.fd' \
			-o -name '*.in' \
			-o -name '*.tex' \
			-o -name '*,[vpt]' \
			-o -name 'Setup' \
			-o -name 'Setup.*' \
			-o -name README \
			-o -name Makefile \
			-o -name ChangeLog \
			-o -name Repository \
			-o -name Root \
			-o -name Entries \
			-o -name Tag \
			-o -name tags \
			-o -name TAGS \
			-o -name .cvsignore \
			-o -name MANIFEST \
			-o -print
# IF YOU PUT ANYTHING HERE IT WILL GO AWAY