Makefile.in - platform/external/python/cpython3 - Gitiles

 ########################################################################
 # Copyright 1991, 1992, 1993, 1994 by Stichting Mathematisch Centrum,
 # Amsterdam, The Netherlands.
 #
 #                         All Rights Reserved
 #
 # Permission to use, copy, modify, and distribute this software and its
 # documentation for any purpose and without fee is hereby granted,
 # provided that the above copyright notice appear in all copies and that
 # both that copyright notice and this permission notice appear in
 # supporting documentation, and that the names of Stichting Mathematisch
 # Centrum or CWI not be used in advertising or publicity pertaining to
 # distribution of the software without specific, written prior permission.
 #
 # STICHTING MATHEMATISCH CENTRUM DISCLAIMS ALL WARRANTIES WITH REGARD TO
 # THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
 # FITNESS, IN NO EVENT SHALL STICHTING MATHEMATISCH CENTRUM BE LIABLE
 # FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 # WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 # ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
 # OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 ########################################################################

 # Toplevel Makefile for Python
 # Note -- if recursive makes fail, try adding MAKE=make

 # Substitutions by configure
 srcdir=		@srcdir@
 VPATH=		@srcdir@
 INSTALL=	@INSTALL@

 # Install prefixes are treated specially by the configure script:
 # it only changes these lines if it has received a --prefix=... or
 # --exec-prefix-... command line option, or if it has figured out
 # a value by searching for python in $PATH.  Note that $(prefix) is
 # also used when compiling config.c in Modules to set the default
 # module search path, so if you change it later be sure to change it
 # there too and rebuild.

 # Install prefix for architecture-independent files
 prefix=		/usr/local

 # Install prefix for architecture-dependent files
 exec_prefix=	$(prefix)

 # Programs
 SHELL=		/bin/sh

 # --with-PACKAGE options for configure script
 # e.g. --with-readline --with-svr5 --with-solaris --with-thread
 # (see README for an explanation)
 WITH=

 # Compiler options passed to subordinate makes
 OPT=		-O

 # Subdirectories where to run make recursively
 SUBDIRS=	Parser Objects Python Modules

 # Other subdirectories
 SUBDIRSTOO=	Include Lib Doc Misc Demo readline Grammar

 # Files and directories to be distributed
 CONFIGFILES=	configure configure.in acconfig.h config.h.in Makefile.in
 DISTFILES=	README ChangeLog $(CONFIGFILES)
 DISTDIRS=	$(SUBDIRS) $(SUBDIRSTOO) Ext-dummy
 DIST=		$(DISTFILES) $(DISTDIRS)

 # Default target
 all:		python

 # Build the interpreter
 python:		Makefiles
 		for i in $(SUBDIRS); do \
 			(echo $$i; cd $$i; $(MAKE) OPT="$(OPT)" all); \
 		done

 # Test the interpreter (twice, once without .pyc files, once with)
 TESTPATH=	$(srcdir)/Lib:$(srcdir)/Lib/test
 test:		python
 		-rm -f $(srcdir)/Lib/test/*.pyc
 		PYTHONPATH=$(TESTPATH) ./python -c 'import autotest'
 		PYTHONPATH=$(TESTPATH) ./python -c 'import autotest'

 # Install the interpreter
 install:	python
 		$(INSTALL) python $(exec_prefix)/bin/python
 		@echo If this is your first time, consider make libinstall...

 # Install the library.
 # If your system does not support "cp -r", try "copy -r" or perhaps
 # something like find Lib -print | cpio -pacvdmu $(DESTDIR)/lib/python
 libinstall:
 		-if test ! -d $(prefix)/lib/python; \
 		then mkdir $(prefix)/lib/python; \
 		fi
 		cp -r $(srcdir)/Lib/* $(prefix)/lib/python
 		@echo Ideally, run something to compile all modules now...

 # install the manual page
 maninstall:
 		$(INSTALL) $(srcdir)/Misc/python.man \
 			$(prefix)/man/man1/python.1

 # install the include files
 INCLUDEPY=	$(prefix)/include/Py
 inclinstall:
 		-if test ! -d $(INCLUDEPY); \
 		then mkdir $(INCLUDEPY); \
 		fi
 		cp $(srcdir)/Include/*.h $(INCLUDEPY)

 # install the lib*.a files and miscellaneous stuff needed by extensions
 LIBP=		$(exec_prefix)/lib/python
 LIBPL=		$(LIBP)/lib
 libainstall:	all
 		-if test ! -d $(LIBP); \
 		then mkdir $(LIBP); \
 		fi
 		-if test ! -d $(LIBPL); \
 		then mkdir $(LIBPL); \
 		fi
 		for i in $(SUBDIRS); do \
 			echo $$i; $(INSTALL) $$i/lib$$i.a $(LIBPL)/lib$$i.a; \
 		done
 		$(INSTALL) Modules/config.c $(LIBPL)/config.c
 		$(INSTALL) $(srcdir)/Modules/config.c.in $(LIBPL)/config.c.in
 		$(INSTALL) Modules/Makefile $(LIBPL)/Makefile
 		$(INSTALL) Modules/Setup $(LIBPL)/Setup
 		$(INSTALL) $(srcdir)/Modules/makesetup $(LIBPL)/makesetup
 		$(INSTALL) config.h $(LIBPL)/config.h
 		$(INSTALL) $(srcdir)/Python/frozenmain.c $(LIBPL)/frozenmain.c

 # Build the sub-Makefiles
 Makefiles:	config.status
 		(cd Modules; $(MAKE) -f Makefile.pre Makefile)
 		for i in . $(SUBDIRS); do \
 			(echo $$i; cd $$i; $(MAKE) Makefile); \
 		done

 # Build the toplevel Makefile
 Makefile:	Makefile.in config.status
 		CONFIG_FILES=Makefile CONFIG_HEADERS= $(SHELL) config.status

 # Run the configure script.  If config.status already exists,
 # call it with the --recheck argument, which reruns configure with the
 # same options as it was run last time; otherwise run the configure
 # script with options taken from the $(WITH) variable
 config.status:	$(srcdir)/configure
 		if test -f config.status; \
 		then $(SHELL) config.status --recheck; \
 		else $(SHELL) $(srcdir)/configure $(WITH); \
 		fi

 .PRECIOUS:	config.status python

 # Rerun configure with the same options as it was run last time,
 # provided the config.status script exists
 recheck:
 		$(SHELL) config.status --recheck

 # Rebuild the configure script from configure.in; also rebuild config.h.in
 autoconf:
 		(cd $(srcdir); autoconf; autoheader)

 # Create a tags file for vi
 tags::
 		ctags -w -t Include/*.h
 		for i in $(SUBDIRS); do ctags -w -t -a $$i/*.[ch]; done
 		sort tags -o tags

 # Create a tags file for GNU Emacs
 TAGS::
 		etags -t Include/*.h
 		for i in $(SUBDIRS); do etags -t -a $$i/*.[ch]; done

 # Add dependencies to sub-Makefiles
 depend:
 		for i in $(SUBDIRS); do \
 			(echo $$i; cd $$i; $(MAKE) depend); \
 		done

 # Sanitation targets -- clean leaves libraries, executables and tags
 # files, which clobber removes those as well

 localclean:
 		-rm -f core *~ [@,#]* *.old *.orig *.rej

 clean:		localclean
 		-for i in $(SUBDIRS); do \
 			(echo $$i; cd $$i; \
 			 if test -f Makefile; \
 			 then $(MAKE) clean; \
 			 else $(MAKE) -f Makefile.*in clean; \
 			 fi); \
 		done

 localclobber:	localclean
 		-rm -f tags TAGS python

 clobber:	localclobber
 		-for i in $(SUBDIRS); do \
 			(echo $$i; cd $$i; \
 			 if test -f Makefile; \
 			 then $(MAKE) clobber; \
 			 else $(MAKE) -f Makefile.in clobber; \
 			 fi); \
 		done

 # Make things extra clean, before making a distribution
 distclean:	clobber
 		-$(MAKE) SUBDIRS="$(SUBDIRSTOO)" clobber
 		-rm -f config.status config.h Makefile
 		-for i in $(SUBDIRS) $(SUBDIRSTOO); do \
 			 for f in $$i/*.in; do \
 				f=`basename "$$f" .in`; \
 			 	if test "$$f" != "*"; then \
 					echo rm -f "$$i/$$f"; \
 				 	rm -f "$$i/$$f"; \
 				fi; \
 			 done; \
 		done

 # Find files with funny names
 find:
 		find $(DISTDIRS) -type d \
 			-o -name '*.[chs]' \
 			-o -name '*.py' \
 			-o -name '*.doc' \
 			-o -name '*.sty' \
 			-o -name '*.bib' \
 			-o -name '*.dat' \
 			-o -name '*.el' \
 			-o -name '*.fd' \
 			-o -name '*.in' \
 			-o -name '*.tex' \
 			-o -name '*,[vpt]' \
 			-o -name 'Setup' \
 			-o -name 'Setup.*' \
 			-o -name README \
 			-o -name Makefile \
 			-o -name ChangeLog \
 			-o -name RCS \
 			-o -name Repository \
 			-o -name Entries \
 			-o -name Tag \
 			-o -name tags \
 			-o -name TAGS \
 			-o -name .cvsignore \
 			-o -name MANIFEST \
 			-o -print

 # Build a distribution tar file (run make distclean first)
 # (This leaves the RCS and CVS directories in :-( )
 tar:
 		tar cf - $(DIST) | compress >dist.tar.Z
	########################################################################
	# Copyright 1991, 1992, 1993, 1994 by Stichting Mathematisch Centrum,
	# Amsterdam, The Netherlands.
	#
	# All Rights Reserved
	#
	# Permission to use, copy, modify, and distribute this software and its
	# documentation for any purpose and without fee is hereby granted,
	# provided that the above copyright notice appear in all copies and that
	# both that copyright notice and this permission notice appear in
	# supporting documentation, and that the names of Stichting Mathematisch
	# Centrum or CWI not be used in advertising or publicity pertaining to
	# distribution of the software without specific, written prior permission.
	#
	# STICHTING MATHEMATISCH CENTRUM DISCLAIMS ALL WARRANTIES WITH REGARD TO
	# THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
	# FITNESS, IN NO EVENT SHALL STICHTING MATHEMATISCH CENTRUM BE LIABLE
	# FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
	# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
	# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
	# OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
	########################################################################

	# Toplevel Makefile for Python
	# Note -- if recursive makes fail, try adding MAKE=make

	# Substitutions by configure
	srcdir= @srcdir@
	VPATH= @srcdir@
	INSTALL= @INSTALL@

	# Install prefixes are treated specially by the configure script:
	# it only changes these lines if it has received a --prefix=... or
	# --exec-prefix-... command line option, or if it has figured out
	# a value by searching for python in $PATH. Note that $(prefix) is
	# also used when compiling config.c in Modules to set the default
	# module search path, so if you change it later be sure to change it
	# there too and rebuild.

	# Install prefix for architecture-independent files
	prefix= /usr/local

	# Install prefix for architecture-dependent files
	exec_prefix= $(prefix)

	# Programs
	SHELL= /bin/sh

	# --with-PACKAGE options for configure script
	# e.g. --with-readline --with-svr5 --with-solaris --with-thread
	# (see README for an explanation)
	WITH=

	# Compiler options passed to subordinate makes
	OPT= -O

	# Subdirectories where to run make recursively
	SUBDIRS= Parser Objects Python Modules

	# Other subdirectories
	SUBDIRSTOO= Include Lib Doc Misc Demo readline Grammar

	# Files and directories to be distributed
	CONFIGFILES= configure configure.in acconfig.h config.h.in Makefile.in
	DISTFILES= README ChangeLog $(CONFIGFILES)
	DISTDIRS= $(SUBDIRS) $(SUBDIRSTOO) Ext-dummy
	DIST= $(DISTFILES) $(DISTDIRS)

	# Default target
	all: python

	# Build the interpreter
	python: Makefiles
	for i in $(SUBDIRS); do \
	(echo $$i; cd $$i; $(MAKE) OPT="$(OPT)" all); \
	done

	# Test the interpreter (twice, once without .pyc files, once with)
	TESTPATH= $(srcdir)/Lib:$(srcdir)/Lib/test
	test: python
	-rm -f $(srcdir)/Lib/test/*.pyc
	PYTHONPATH=$(TESTPATH) ./python -c 'import autotest'
	PYTHONPATH=$(TESTPATH) ./python -c 'import autotest'

	# Install the interpreter
	install: python
	$(INSTALL) python $(exec_prefix)/bin/python
	@echo If this is your first time, consider make libinstall...

	# Install the library.
	# If your system does not support "cp -r", try "copy -r" or perhaps
	# something like find Lib -print \| cpio -pacvdmu $(DESTDIR)/lib/python
	libinstall:
	-if test ! -d $(prefix)/lib/python; \
	then mkdir $(prefix)/lib/python; \
	fi
	cp -r $(srcdir)/Lib/* $(prefix)/lib/python
	@echo Ideally, run something to compile all modules now...

	# install the manual page
	maninstall:
	$(INSTALL) $(srcdir)/Misc/python.man \
	$(prefix)/man/man1/python.1

	# install the include files
	INCLUDEPY= $(prefix)/include/Py
	inclinstall:
	-if test ! -d $(INCLUDEPY); \
	then mkdir $(INCLUDEPY); \
	fi
	cp $(srcdir)/Include/*.h $(INCLUDEPY)

	# install the lib*.a files and miscellaneous stuff needed by extensions
	LIBP= $(exec_prefix)/lib/python
	LIBPL= $(LIBP)/lib
	libainstall: all
	-if test ! -d $(LIBP); \
	then mkdir $(LIBP); \
	fi
	-if test ! -d $(LIBPL); \
	then mkdir $(LIBPL); \
	fi
	for i in $(SUBDIRS); do \
	echo $$i; $(INSTALL) $$i/lib$$i.a $(LIBPL)/lib$$i.a; \
	done
	$(INSTALL) Modules/config.c $(LIBPL)/config.c
	$(INSTALL) $(srcdir)/Modules/config.c.in $(LIBPL)/config.c.in
	$(INSTALL) Modules/Makefile $(LIBPL)/Makefile
	$(INSTALL) Modules/Setup $(LIBPL)/Setup
	$(INSTALL) $(srcdir)/Modules/makesetup $(LIBPL)/makesetup
	$(INSTALL) config.h $(LIBPL)/config.h
	$(INSTALL) $(srcdir)/Python/frozenmain.c $(LIBPL)/frozenmain.c

	# Build the sub-Makefiles
	Makefiles: config.status
	(cd Modules; $(MAKE) -f Makefile.pre Makefile)
	for i in . $(SUBDIRS); do \
	(echo $$i; cd $$i; $(MAKE) Makefile); \
	done

	# Build the toplevel Makefile
	Makefile: Makefile.in config.status
	CONFIG_FILES=Makefile CONFIG_HEADERS= $(SHELL) config.status

	# Run the configure script. If config.status already exists,
	# call it with the --recheck argument, which reruns configure with the
	# same options as it was run last time; otherwise run the configure
	# script with options taken from the $(WITH) variable
	config.status: $(srcdir)/configure
	if test -f config.status; \
	then $(SHELL) config.status --recheck; \
	else $(SHELL) $(srcdir)/configure $(WITH); \
	fi

	.PRECIOUS: config.status python

	# Rerun configure with the same options as it was run last time,
	# provided the config.status script exists
	recheck:
	$(SHELL) config.status --recheck

	# Rebuild the configure script from configure.in; also rebuild config.h.in
	autoconf:
	(cd $(srcdir); autoconf; autoheader)

	# Create a tags file for vi
	tags::
	ctags -w -t Include/*.h
	for i in $(SUBDIRS); do ctags -w -t -a $$i/*.[ch]; done
	sort tags -o tags

	# Create a tags file for GNU Emacs
	TAGS::
	etags -t Include/*.h
	for i in $(SUBDIRS); do etags -t -a $$i/*.[ch]; done

	# Add dependencies to sub-Makefiles
	depend:
	for i in $(SUBDIRS); do \
	(echo $$i; cd $$i; $(MAKE) depend); \
	done

	# Sanitation targets -- clean leaves libraries, executables and tags
	# files, which clobber removes those as well

	localclean:
	-rm -f core ~ [@,#] .old .orig *.rej

	clean: localclean
	-for i in $(SUBDIRS); do \
	(echo $$i; cd $$i; \
	if test -f Makefile; \
	then $(MAKE) clean; \
	else $(MAKE) -f Makefile.*in clean; \
	fi); \
	done

	localclobber: localclean
	-rm -f tags TAGS python

	clobber: localclobber
	-for i in $(SUBDIRS); do \
	(echo $$i; cd $$i; \
	if test -f Makefile; \
	then $(MAKE) clobber; \
	else $(MAKE) -f Makefile.in clobber; \
	fi); \
	done

	# Make things extra clean, before making a distribution
	distclean: clobber
	-$(MAKE) SUBDIRS="$(SUBDIRSTOO)" clobber
	-rm -f config.status config.h Makefile
	-for i in $(SUBDIRS) $(SUBDIRSTOO); do \
	for f in $$i/*.in; do \
	f=`basename "$$f" .in`; \
	if test "$$f" != "*"; then \
	echo rm -f "$$i/$$f"; \
	rm -f "$$i/$$f"; \
	fi; \
	done; \
	done

	# Find files with funny names
	find:
	find $(DISTDIRS) -type d \
	-o -name '*.[chs]' \
	-o -name '*.py' \
	-o -name '*.doc' \
	-o -name '*.sty' \
	-o -name '*.bib' \
	-o -name '*.dat' \
	-o -name '*.el' \
	-o -name '*.fd' \
	-o -name '*.in' \
	-o -name '*.tex' \
	-o -name '*,[vpt]' \
	-o -name 'Setup' \
	-o -name 'Setup.*' \
	-o -name README \
	-o -name Makefile \
	-o -name ChangeLog \
	-o -name RCS \
	-o -name Repository \
	-o -name Entries \
	-o -name Tag \
	-o -name tags \
	-o -name TAGS \
	-o -name .cvsignore \
	-o -name MANIFEST \
	-o -print

	# Build a distribution tar file (run make distclean first)
	# (This leaves the RCS and CVS directories in :-( )
	tar:
	tar cf - $(DIST) \| compress >dist.tar.Z