blob: ad91c302e063831d4521f81ce5f26ca52c2ded8b [file] [log] [blame]
# Top-level Makefile for Python
#
# As distributed, this file is called Makefile.pre.in; it is processed
# into the real Makefile by running the script ./configure, which
# replaces things like @spam@ with values appropriate for your system.
# This means that if you edit Makefile, your changes get lost the next
# time you run the configure script. Ideally, you can do:
#
# ./configure
# make
# make test
# make install
#
# If you have a previous version of Python installed that you don't
# want to overwrite, you can use "make altinstall" instead of "make
# install". Refer to the "Installing" section in the README file for
# additional details.
#
# See also the section "Build instructions" in the README file.
# === Variables set by makesetup ===
MODOBJS= _MODOBJS_
MODLIBS= _MODLIBS_
# === Variables set by configure
VERSION= @VERSION@
srcdir= @srcdir@
VPATH= @srcdir@
abs_srcdir= @abs_srcdir@
abs_builddir= @abs_builddir@
CC= @CC@
CXX= @CXX@
MAINCC= @MAINCC@
LINKCC= @LINKCC@
AR= @AR@
RANLIB= @RANLIB@
READELF= @READELF@
SOABI= @SOABI@
LDVERSION= @LDVERSION@
HGVERSION= @HGVERSION@
HGTAG= @HGTAG@
HGBRANCH= @HGBRANCH@
GNULD= @GNULD@
# Shell used by make (some versions default to the login shell, which is bad)
SHELL= /bin/sh
# Use this to make a link between python$(VERSION) and python in $(BINDIR)
LN= @LN@
# Portable install script (configure doesn't always guess right)
INSTALL= @INSTALL@
INSTALL_PROGRAM=@INSTALL_PROGRAM@
INSTALL_SCRIPT= @INSTALL_SCRIPT@
INSTALL_DATA= @INSTALL_DATA@
# Shared libraries must be installed with executable mode on some systems;
# rather than figuring out exactly which, we always give them executable mode.
# Also, making them read-only seems to be a good idea...
INSTALL_SHARED= ${INSTALL} -m 555
MKDIR_P= @MKDIR_P@
MAKESETUP= $(srcdir)/Modules/makesetup
# Compiler options
OPT= @OPT@
BASECFLAGS= @BASECFLAGS@
BASECPPFLAGS= @BASECPPFLAGS@
CONFIGURE_CFLAGS= @CFLAGS@
CONFIGURE_CPPFLAGS= @CPPFLAGS@
CONFIGURE_LDFLAGS= @LDFLAGS@
# Avoid assigning CFLAGS, LDFLAGS, etc. so users can use them on the
# command line to append to these values without stomping the pre-set
# values.
PY_CFLAGS= $(BASECFLAGS) $(OPT) $(CONFIGURE_CFLAGS) $(CFLAGS) $(EXTRA_CFLAGS)
# Both CPPFLAGS and LDFLAGS need to contain the shell's value for setup.py to
# be able to build extension modules using the directories specified in the
# environment variables
PY_CPPFLAGS= $(BASECPPFLAGS) -I. -IInclude -I$(srcdir)/Include $(CONFIGURE_CPPFLAGS) $(CPPFLAGS)
PY_LDFLAGS= $(CONFIGURE_LDFLAGS) $(LDFLAGS)
NO_AS_NEEDED= @NO_AS_NEEDED@
LDLAST= @LDLAST@
SGI_ABI= @SGI_ABI@
CCSHARED= @CCSHARED@
LINKFORSHARED= @LINKFORSHARED@
ARFLAGS= @ARFLAGS@
# Extra C flags added for building the interpreter object files.
CFLAGSFORSHARED=@CFLAGSFORSHARED@
# C flags used for building the interpreter object files
PY_CORE_CFLAGS= $(PY_CFLAGS) $(PY_CPPFLAGS) $(CFLAGSFORSHARED) -DPy_BUILD_CORE
# Machine-dependent subdirectories
MACHDEP= @MACHDEP@
# Multiarch directory (may be empty)
MULTIARCH= @MULTIARCH@
# Install prefix for architecture-independent files
prefix= @prefix@
# Install prefix for architecture-dependent files
exec_prefix= @exec_prefix@
# Install prefix for data files
datarootdir= @datarootdir@
# Expanded directories
BINDIR= @bindir@
LIBDIR= @libdir@
MANDIR= @mandir@
INCLUDEDIR= @includedir@
CONFINCLUDEDIR= $(exec_prefix)/include
SCRIPTDIR= $(prefix)/lib
ABIFLAGS= @ABIFLAGS@
# Detailed destination directories
BINLIBDEST= $(LIBDIR)/python$(VERSION)
LIBDEST= $(SCRIPTDIR)/python$(VERSION)
INCLUDEPY= $(INCLUDEDIR)/python$(LDVERSION)
CONFINCLUDEPY= $(CONFINCLUDEDIR)/python$(LDVERSION)
# Symbols used for using shared libraries
SO= @SO@
LDSHARED= @LDSHARED@ $(PY_LDFLAGS)
BLDSHARED= @BLDSHARED@ $(PY_LDFLAGS)
LDCXXSHARED= @LDCXXSHARED@
DESTSHARED= $(BINLIBDEST)/lib-dynload
# Executable suffix (.exe on Windows and Mac OS X)
EXE= @EXEEXT@
BUILDEXE= @BUILDEXEEXT@
# Short name and location for Mac OS X Python framework
UNIVERSALSDK=@UNIVERSALSDK@
PYTHONFRAMEWORK= @PYTHONFRAMEWORK@
PYTHONFRAMEWORKDIR= @PYTHONFRAMEWORKDIR@
PYTHONFRAMEWORKPREFIX= @PYTHONFRAMEWORKPREFIX@
PYTHONFRAMEWORKINSTALLDIR= @PYTHONFRAMEWORKINSTALLDIR@
# Deployment target selected during configure, to be checked
# by distutils. The export statement is needed to ensure that the
# deployment target is active during build.
MACOSX_DEPLOYMENT_TARGET=@CONFIGURE_MACOSX_DEPLOYMENT_TARGET@
@EXPORT_MACOSX_DEPLOYMENT_TARGET@export MACOSX_DEPLOYMENT_TARGET
# Options to enable prebinding (for fast startup prior to Mac OS X 10.3)
OTHER_LIBTOOL_OPT=@OTHER_LIBTOOL_OPT@
# Environment to run shared python without installed libraries
RUNSHARED= @RUNSHARED@
# Modes for directories, executables and data files created by the
# install process. Default to user-only-writable for all file types.
DIRMODE= 755
EXEMODE= 755
FILEMODE= 644
# configure script arguments
CONFIG_ARGS= @CONFIG_ARGS@
# Subdirectories with code
SRCDIRS= @SRCDIRS@
# Other subdirectories
SUBDIRSTOO= Include Lib Misc
# Files and directories to be distributed
CONFIGFILES= configure configure.ac acconfig.h pyconfig.h.in Makefile.pre.in
DISTFILES= README ChangeLog $(CONFIGFILES)
DISTDIRS= $(SUBDIRS) $(SUBDIRSTOO) Ext-dummy
DIST= $(DISTFILES) $(DISTDIRS)
LIBRARY= @LIBRARY@
LDLIBRARY= @LDLIBRARY@
BLDLIBRARY= @BLDLIBRARY@
PY3LIBRARY= @PY3LIBRARY@
DLLLIBRARY= @DLLLIBRARY@
LDLIBRARYDIR= @LDLIBRARYDIR@
INSTSONAME= @INSTSONAME@
LIBS= @LIBS@
LIBM= @LIBM@
LIBC= @LIBC@
SYSLIBS= $(LIBM) $(LIBC)
SHLIBS= @SHLIBS@
THREADOBJ= @THREADOBJ@
DLINCLDIR= @DLINCLDIR@
DYNLOADFILE= @DYNLOADFILE@
MACHDEP_OBJS= @MACHDEP_OBJS@
LIBOBJDIR= Python/
LIBOBJS= @LIBOBJS@
PYTHON= python$(EXE)
BUILDPYTHON= python$(BUILDEXE)
PYTHON_FOR_BUILD=@PYTHON_FOR_BUILD@
_PYTHON_HOST_PLATFORM=@_PYTHON_HOST_PLATFORM@
BUILD_GNU_TYPE= @build@
HOST_GNU_TYPE= @host@
# The task to run while instrument when building the profile-opt target
PROFILE_TASK= $(srcdir)/Tools/pybench/pybench.py -n 2 --with-gc --with-syscheck
#PROFILE_TASK= $(srcdir)/Lib/test/regrtest.py
# === Definitions added by makesetup ===
##########################################################################
# Modules
MODULE_OBJS= \
Modules/config.o \
Modules/getpath.o \
Modules/main.o \
Modules/gcmodule.o
# Used of signalmodule.o is not available
SIGNAL_OBJS= @SIGNAL_OBJS@
IO_H= Modules/_io/_iomodule.h
IO_OBJS= \
Modules/_io/_iomodule.o \
Modules/_io/iobase.o \
Modules/_io/fileio.o \
Modules/_io/bufferedio.o \
Modules/_io/textio.o \
Modules/_io/bytesio.o \
Modules/_io/stringio.o
##########################################################################
# Grammar
GRAMMAR_H= Include/graminit.h
GRAMMAR_C= Python/graminit.c
GRAMMAR_INPUT= $(srcdir)/Grammar/Grammar
LIBFFI_INCLUDEDIR= @LIBFFI_INCLUDEDIR@
##########################################################################
# Parser
PGEN= Parser/pgen$(EXE)
PSRCS= \
Parser/acceler.c \
Parser/grammar1.c \
Parser/listnode.c \
Parser/node.c \
Parser/parser.c \
Parser/bitset.c \
Parser/metagrammar.c \
Parser/firstsets.c \
Parser/grammar.c \
Parser/pgen.c
POBJS= \
Parser/acceler.o \
Parser/grammar1.o \
Parser/listnode.o \
Parser/node.o \
Parser/parser.o \
Parser/bitset.o \
Parser/metagrammar.o \
Parser/firstsets.o \
Parser/grammar.o \
Parser/pgen.o
PARSER_OBJS= $(POBJS) Parser/myreadline.o Parser/parsetok.o Parser/tokenizer.o
PGSRCS= \
Objects/obmalloc.c \
Python/dynamic_annotations.c \
Python/mysnprintf.c \
Python/pyctype.c \
Parser/tokenizer_pgen.c \
Parser/printgrammar.c \
Parser/parsetok_pgen.c \
Parser/pgenmain.c
PGOBJS= \
Objects/obmalloc.o \
Python/dynamic_annotations.o \
Python/mysnprintf.o \
Python/pyctype.o \
Parser/tokenizer_pgen.o \
Parser/printgrammar.o \
Parser/parsetok_pgen.o \
Parser/pgenmain.o
PARSER_HEADERS= \
$(srcdir)/Parser/parser.h \
$(srcdir)/Include/parsetok.h \
$(srcdir)/Parser/tokenizer.h
PGENSRCS= $(PSRCS) $(PGSRCS)
PGENOBJS= $(POBJS) $(PGOBJS)
##########################################################################
# AST
AST_H_DIR= Include
AST_H= $(AST_H_DIR)/Python-ast.h
AST_C_DIR= Python
AST_C= $(AST_C_DIR)/Python-ast.c
AST_ASDL= $(srcdir)/Parser/Python.asdl
ASDLGEN_FILES= $(srcdir)/Parser/asdl.py $(srcdir)/Parser/asdl_c.py
# XXX Note that a build now requires Python exist before the build starts
ASDLGEN= @ASDLGEN@ $(srcdir)/Parser/asdl_c.py
##########################################################################
# Python
OPCODETARGETS_H= \
Python/opcode_targets.h
OPCODETARGETGEN= \
$(srcdir)/Python/makeopcodetargets.py
OPCODETARGETGEN_FILES= \
$(OPCODETARGETGEN) $(srcdir)/Lib/opcode.py
PYTHON_OBJS= \
Python/_warnings.o \
Python/Python-ast.o \
Python/asdl.o \
Python/ast.o \
Python/bltinmodule.o \
Python/ceval.o \
Python/compile.o \
Python/codecs.o \
Python/dynamic_annotations.o \
Python/errors.o \
Python/frozenmain.o \
Python/future.o \
Python/getargs.o \
Python/getcompiler.o \
Python/getcopyright.o \
Python/getplatform.o \
Python/getversion.o \
Python/graminit.o \
Python/import.o \
Python/importdl.o \
Python/marshal.o \
Python/modsupport.o \
Python/mystrtoul.o \
Python/mysnprintf.o \
Python/peephole.o \
Python/pyarena.o \
Python/pyctype.o \
Python/pyfpe.o \
Python/pymath.o \
Python/pystate.o \
Python/pythonrun.o \
Python/pytime.o \
Python/random.o \
Python/structmember.o \
Python/symtable.o \
Python/sysmodule.o \
Python/traceback.o \
Python/getopt.o \
Python/pystrcmp.o \
Python/pystrtod.o \
Python/dtoa.o \
Python/formatter_unicode.o \
Python/fileutils.o \
Python/$(DYNLOADFILE) \
$(LIBOBJS) \
$(MACHDEP_OBJS) \
$(THREADOBJ)
##########################################################################
# Objects
OBJECT_OBJS= \
Objects/abstract.o \
Objects/accu.o \
Objects/boolobject.o \
Objects/bytes_methods.o \
Objects/bytearrayobject.o \
Objects/bytesobject.o \
Objects/cellobject.o \
Objects/classobject.o \
Objects/codeobject.o \
Objects/complexobject.o \
Objects/descrobject.o \
Objects/enumobject.o \
Objects/exceptions.o \
Objects/genobject.o \
Objects/fileobject.o \
Objects/floatobject.o \
Objects/frameobject.o \
Objects/funcobject.o \
Objects/iterobject.o \
Objects/listobject.o \
Objects/longobject.o \
Objects/dictobject.o \
Objects/memoryobject.o \
Objects/methodobject.o \
Objects/moduleobject.o \
Objects/namespaceobject.o \
Objects/object.o \
Objects/obmalloc.o \
Objects/capsule.o \
Objects/rangeobject.o \
Objects/setobject.o \
Objects/sliceobject.o \
Objects/structseq.o \
Objects/tupleobject.o \
Objects/typeobject.o \
Objects/unicodeobject.o \
Objects/unicodectype.o \
Objects/weakrefobject.o
##########################################################################
# objects that get linked into the Python library
LIBRARY_OBJS_OMIT_FROZEN= \
Modules/getbuildinfo.o \
$(PARSER_OBJS) \
$(OBJECT_OBJS) \
$(PYTHON_OBJS) \
$(MODULE_OBJS) \
$(SIGNAL_OBJS) \
$(MODOBJS)
LIBRARY_OBJS= \
$(LIBRARY_OBJS_OMIT_FROZEN) \
Python/frozen.o
#########################################################################
# Rules
# Default target
all: build_all
build_all: $(BUILDPYTHON) oldsharedmods sharedmods gdbhooks Modules/_testembed python-config
# Compile a binary with gcc profile guided optimization.
profile-opt:
@echo "Building with support for profile generation:"
$(MAKE) clean
$(MAKE) build_all_generate_profile
@echo "Running benchmark to generate profile data:"
$(MAKE) profile-removal
$(MAKE) run_profile_task
@echo "Rebuilding with profile guided optimizations:"
$(MAKE) clean
$(MAKE) build_all_use_profile
build_all_generate_profile:
$(MAKE) all CFLAGS="$(CFLAGS) -fprofile-generate" LIBS="$(LIBS) -lgcov"
run_profile_task:
: # FIXME: can't run for a cross build
$(RUNSHARED) ./$(BUILDPYTHON) $(PROFILE_TASK)
build_all_use_profile:
$(MAKE) all CFLAGS="$(CFLAGS) -fprofile-use -fprofile-correction"
coverage:
@echo "Building with support for coverage checking:"
$(MAKE) clean
$(MAKE) all CFLAGS="$(CFLAGS) -O0 -pg -fprofile-arcs -ftest-coverage" LIBS="$(LIBS) -lgcov"
# Build the interpreter
$(BUILDPYTHON): Modules/python.o $(LIBRARY) $(LDLIBRARY) $(PY3LIBRARY)
$(LINKCC) $(PY_LDFLAGS) $(LINKFORSHARED) -o $@ Modules/python.o $(BLDLIBRARY) $(LIBS) $(MODLIBS) $(SYSLIBS) $(LDLAST)
platform: $(BUILDPYTHON) pybuilddir.txt
$(RUNSHARED) $(PYTHON_FOR_BUILD) -c 'import sys ; from sysconfig import get_platform ; print(get_platform()+"-"+sys.version[0:3])' >platform
# Create build directory and generate the sysconfig build-time data there.
# pybuilddir.txt contains the name of the build dir and is used for
# sys.path fixup -- see Modules/getpath.c.
pybuilddir.txt: $(BUILDPYTHON)
$(RUNSHARED) $(PYTHON_FOR_BUILD) -S -m sysconfig --generate-posix-vars
# Build the shared modules
# Under GNU make, MAKEFLAGS are sorted and normalized; the 's' for
# -s, --silent or --quiet is always the first char.
# Under BSD make, MAKEFLAGS might be " -s -v x=y".
sharedmods: $(BUILDPYTHON) pybuilddir.txt
@case "$$MAKEFLAGS" in \
*\ -s*|s*) quiet="-q";; \
*) quiet="";; \
esac; \
$(RUNSHARED) CC='$(CC)' LDSHARED='$(BLDSHARED)' OPT='$(OPT)' \
$(PYTHON_FOR_BUILD) $(srcdir)/setup.py $$quiet build
# Build static library
# avoid long command lines, same as LIBRARY_OBJS
$(LIBRARY): $(LIBRARY_OBJS)
-rm -f $@
$(AR) $(ARFLAGS) $@ Modules/getbuildinfo.o
$(AR) $(ARFLAGS) $@ $(PARSER_OBJS)
$(AR) $(ARFLAGS) $@ $(OBJECT_OBJS)
$(AR) $(ARFLAGS) $@ $(PYTHON_OBJS) Python/frozen.o
$(AR) $(ARFLAGS) $@ $(MODULE_OBJS) $(SIGNAL_OBJS)
$(AR) $(ARFLAGS) $@ $(MODOBJS)
$(RANLIB) $@
libpython$(LDVERSION).so: $(LIBRARY_OBJS)
if test $(INSTSONAME) != $(LDLIBRARY); then \
$(BLDSHARED) -Wl,-h$(INSTSONAME) -o $(INSTSONAME) $(LIBRARY_OBJS) $(MODLIBS) $(SHLIBS) $(LIBC) $(LIBM) $(LDLAST); \
$(LN) -f $(INSTSONAME) $@; \
else \
$(BLDSHARED) -o $@ $(LIBRARY_OBJS) $(MODLIBS) $(SHLIBS) $(LIBC) $(LIBM) $(LDLAST); \
fi
libpython3.so: libpython$(LDVERSION).so
$(BLDSHARED) $(NO_AS_NEEDED) -o $@ -Wl,-h$@ $^
libpython$(LDVERSION).dylib: $(LIBRARY_OBJS)
$(CC) -dynamiclib -Wl,-single_module $(PY_LDFLAGS) -undefined dynamic_lookup -Wl,-install_name,$(prefix)/lib/libpython$(LDVERSION).dylib -Wl,-compatibility_version,$(VERSION) -Wl,-current_version,$(VERSION) -o $@ $(LIBRARY_OBJS) $(SHLIBS) $(LIBC) $(LIBM) $(LDLAST); \
libpython$(VERSION).sl: $(LIBRARY_OBJS)
$(LDSHARED) -o $@ $(LIBRARY_OBJS) $(MODLIBS) $(SHLIBS) $(LIBC) $(LIBM) $(LDLAST)
# Copy up the gdb python hooks into a position where they can be automatically
# loaded by gdb during Lib/test/test_gdb.py
#
# Distributors are likely to want to install this somewhere else e.g. relative
# to the stripped DWARF data for the shared library.
gdbhooks: $(BUILDPYTHON)-gdb.py
SRC_GDB_HOOKS=$(srcdir)/Tools/gdb/libpython.py
$(BUILDPYTHON)-gdb.py: $(SRC_GDB_HOOKS)
$(INSTALL_DATA) $(SRC_GDB_HOOKS) $(BUILDPYTHON)-gdb.py
# This rule is here for OPENSTEP/Rhapsody/MacOSX. It builds a temporary
# minimal framework (not including the Lib directory and such) in the current
# directory.
RESSRCDIR=Mac/Resources/framework
$(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)/$(PYTHONFRAMEWORK): \
$(LIBRARY) \
$(RESSRCDIR)/Info.plist
$(INSTALL) -d -m $(DIRMODE) $(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)
$(CC) -o $(LDLIBRARY) $(PY_LDFLAGS) -dynamiclib \
-all_load $(LIBRARY) -Wl,-single_module \
-install_name $(DESTDIR)$(PYTHONFRAMEWORKINSTALLDIR)/Versions/$(VERSION)/$(PYTHONFRAMEWORK) \
-compatibility_version $(VERSION) \
-current_version $(VERSION) \
-framework CoreFoundation $(LIBS);
$(INSTALL) -d -m $(DIRMODE) \
$(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)/Resources/English.lproj
$(INSTALL_DATA) $(RESSRCDIR)/Info.plist \
$(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)/Resources/Info.plist
$(LN) -fsn $(VERSION) $(PYTHONFRAMEWORKDIR)/Versions/Current
$(LN) -fsn Versions/Current/$(PYTHONFRAMEWORK) $(PYTHONFRAMEWORKDIR)/$(PYTHONFRAMEWORK)
$(LN) -fsn Versions/Current/Resources $(PYTHONFRAMEWORKDIR)/Resources
# This rule builds the Cygwin Python DLL and import library if configured
# for a shared core library; otherwise, this rule is a noop.
$(DLLLIBRARY) libpython$(VERSION).dll.a: $(LIBRARY_OBJS)
if test -n "$(DLLLIBRARY)"; then \
$(LDSHARED) -Wl,--out-implib=$@ -o $(DLLLIBRARY) $^ \
$(LIBS) $(MODLIBS) $(SYSLIBS) $(LDLAST); \
else true; \
fi
oldsharedmods: $(SHAREDMODS)
Makefile Modules/config.c: Makefile.pre \
$(srcdir)/Modules/config.c.in \
$(MAKESETUP) \
Modules/Setup.config \
Modules/Setup \
Modules/Setup.local
$(SHELL) $(MAKESETUP) -c $(srcdir)/Modules/config.c.in \
-s Modules \
Modules/Setup.config \
Modules/Setup.local \
Modules/Setup
@mv config.c Modules
@echo "The Makefile was updated, you may need to re-run make."
Modules/Setup: $(srcdir)/Modules/Setup.dist
@if test -f Modules/Setup; then \
echo "-----------------------------------------------"; \
echo "Modules/Setup.dist is newer than Modules/Setup;"; \
echo "check to make sure you have all the updates you"; \
echo "need in your Modules/Setup file."; \
echo "Usually, copying Modules/Setup.dist to Modules/Setup will work."; \
echo "-----------------------------------------------"; \
fi
Modules/_testembed: Modules/_testembed.o $(LIBRARY) $(LDLIBRARY) $(PY3LIBRARY)
$(LINKCC) $(PY_LDFLAGS) $(LINKFORSHARED) -o $@ Modules/_testembed.o $(BLDLIBRARY) $(LIBS) $(MODLIBS) $(SYSLIBS) $(LDLAST)
############################################################################
# Importlib
Modules/_freeze_importlib: Modules/_freeze_importlib.o $(LIBRARY_OBJS_OMIT_FROZEN)
$(LINKCC) $(PY_LDFLAGS) -o $@ Modules/_freeze_importlib.o $(LIBRARY_OBJS_OMIT_FROZEN) $(LIBS) $(MODLIBS) $(SYSLIBS) $(LDLAST)
Python/importlib.h: $(srcdir)/Lib/importlib/_bootstrap.py Modules/_freeze_importlib.c
$(MAKE) Modules/_freeze_importlib
./Modules/_freeze_importlib \
$(srcdir)/Lib/importlib/_bootstrap.py Python/importlib.h
############################################################################
# Special rules for object files
Modules/getbuildinfo.o: $(PARSER_OBJS) \
$(OBJECT_OBJS) \
$(PYTHON_OBJS) \
$(MODULE_OBJS) \
$(SIGNAL_OBJS) \
$(MODOBJS) \
$(srcdir)/Modules/getbuildinfo.c
$(CC) -c $(PY_CORE_CFLAGS) \
-DHGVERSION="\"`LC_ALL=C $(HGVERSION)`\"" \
-DHGTAG="\"`LC_ALL=C $(HGTAG)`\"" \
-DHGBRANCH="\"`LC_ALL=C $(HGBRANCH)`\"" \
-o $@ $(srcdir)/Modules/getbuildinfo.c
Modules/getpath.o: $(srcdir)/Modules/getpath.c Makefile
$(CC) -c $(PY_CORE_CFLAGS) -DPYTHONPATH='"$(PYTHONPATH)"' \
-DPREFIX='"$(prefix)"' \
-DEXEC_PREFIX='"$(exec_prefix)"' \
-DVERSION='"$(VERSION)"' \
-DVPATH='"$(VPATH)"' \
-o $@ $(srcdir)/Modules/getpath.c
Modules/python.o: $(srcdir)/Modules/python.c
$(MAINCC) -c $(PY_CORE_CFLAGS) -o $@ $(srcdir)/Modules/python.c
Modules/_testembed.o: $(srcdir)/Modules/_testembed.c
$(MAINCC) -c $(PY_CORE_CFLAGS) -o $@ $(srcdir)/Modules/_testembed.c
Modules/posixmodule.o: $(srcdir)/Modules/posixmodule.c $(srcdir)/Modules/posixmodule.h
Modules/grpmodule.o: $(srcdir)/Modules/grpmodule.c $(srcdir)/Modules/posixmodule.h
Modules/pwdmodule.o: $(srcdir)/Modules/pwdmodule.c $(srcdir)/Modules/posixmodule.h
Modules/signalmodule.o: $(srcdir)/Modules/signalmodule.c $(srcdir)/Modules/posixmodule.h
Python/dynload_shlib.o: $(srcdir)/Python/dynload_shlib.c Makefile
$(CC) -c $(PY_CORE_CFLAGS) \
-DSOABI='"$(SOABI)"' \
-o $@ $(srcdir)/Python/dynload_shlib.c
Python/sysmodule.o: $(srcdir)/Python/sysmodule.c Makefile
$(CC) -c $(PY_CORE_CFLAGS) \
-DABIFLAGS='"$(ABIFLAGS)"' \
-o $@ $(srcdir)/Python/sysmodule.c
$(IO_OBJS): $(IO_H)
$(GRAMMAR_H): $(GRAMMAR_INPUT) $(PGENSRCS)
@$(MKDIR_P) Include
$(MAKE) $(PGEN)
$(PGEN) $(GRAMMAR_INPUT) $(GRAMMAR_H) $(GRAMMAR_C)
$(GRAMMAR_C): $(GRAMMAR_H) $(GRAMMAR_INPUT) $(PGENSRCS)
$(MAKE) $(GRAMMAR_H)
touch $(GRAMMAR_C)
$(PGEN): $(PGENOBJS)
$(CC) $(OPT) $(PY_LDFLAGS) $(PGENOBJS) $(LIBS) -o $(PGEN)
Parser/grammar.o: $(srcdir)/Parser/grammar.c \
$(srcdir)/Include/token.h \
$(srcdir)/Include/grammar.h
Parser/metagrammar.o: $(srcdir)/Parser/metagrammar.c
Parser/tokenizer_pgen.o: $(srcdir)/Parser/tokenizer.c
Parser/parsetok_pgen.o: $(srcdir)/Parser/parsetok.c
Parser/printgrammar.o: $(srcdir)/Parser/printgrammar.c
Parser/pgenmain.o: $(srcdir)/Include/parsetok.h
$(AST_H): $(AST_ASDL) $(ASDLGEN_FILES)
$(MKDIR_P) $(AST_H_DIR)
$(ASDLGEN) -h $(AST_H_DIR) $(AST_ASDL)
$(AST_C): $(AST_H) $(AST_ASDL) $(ASDLGEN_FILES)
$(MKDIR_P) $(AST_C_DIR)
$(ASDLGEN) -c $(AST_C_DIR) $(AST_ASDL)
Python/compile.o Python/symtable.o Python/ast.o: $(GRAMMAR_H) $(AST_H)
Python/getplatform.o: $(srcdir)/Python/getplatform.c
$(CC) -c $(PY_CORE_CFLAGS) -DPLATFORM='"$(MACHDEP)"' -o $@ $(srcdir)/Python/getplatform.c
Python/importdl.o: $(srcdir)/Python/importdl.c
$(CC) -c $(PY_CORE_CFLAGS) -I$(DLINCLDIR) -o $@ $(srcdir)/Python/importdl.c
Objects/unicodectype.o: $(srcdir)/Objects/unicodectype.c \
$(srcdir)/Objects/unicodetype_db.h
BYTESTR_DEPS = \
$(srcdir)/Objects/stringlib/count.h \
$(srcdir)/Objects/stringlib/ctype.h \
$(srcdir)/Objects/stringlib/fastsearch.h \
$(srcdir)/Objects/stringlib/find.h \
$(srcdir)/Objects/stringlib/join.h \
$(srcdir)/Objects/stringlib/partition.h \
$(srcdir)/Objects/stringlib/split.h \
$(srcdir)/Objects/stringlib/stringdefs.h \
$(srcdir)/Objects/stringlib/transmogrify.h
UNICODE_DEPS = \
$(srcdir)/Objects/stringlib/asciilib.h \
$(srcdir)/Objects/stringlib/codecs.h \
$(srcdir)/Objects/stringlib/count.h \
$(srcdir)/Objects/stringlib/fastsearch.h \
$(srcdir)/Objects/stringlib/find.h \
$(srcdir)/Objects/stringlib/find_max_char.h \
$(srcdir)/Objects/stringlib/localeutil.h \
$(srcdir)/Objects/stringlib/partition.h \
$(srcdir)/Objects/stringlib/split.h \
$(srcdir)/Objects/stringlib/ucs1lib.h \
$(srcdir)/Objects/stringlib/ucs2lib.h \
$(srcdir)/Objects/stringlib/ucs4lib.h \
$(srcdir)/Objects/stringlib/undef.h \
$(srcdir)/Objects/stringlib/unicode_format.h \
$(srcdir)/Objects/stringlib/unicodedefs.h
Objects/bytesobject.o: $(srcdir)/Objects/bytesobject.c $(BYTESTR_DEPS)
Objects/bytearrayobject.o: $(srcdir)/Objects/bytearrayobject.c $(BYTESTR_DEPS)
Objects/unicodeobject.o: $(srcdir)/Objects/unicodeobject.c $(UNICODE_DEPS)
Objects/dictobject.o: $(srcdir)/Objects/stringlib/eq.h
Objects/setobject.o: $(srcdir)/Objects/stringlib/eq.h
$(OPCODETARGETS_H): $(OPCODETARGETGEN_FILES)
$(OPCODETARGETGEN) $(OPCODETARGETS_H)
Python/ceval.o: $(OPCODETARGETS_H) $(srcdir)/Python/ceval_gil.h
Python/frozen.o: Python/importlib.h
Objects/typeobject.o: Objects/typeslots.inc
Objects/typeslots.inc: $(srcdir)/Include/typeslots.h $(srcdir)/Objects/typeslots.py
$(PYTHON) $(srcdir)/Objects/typeslots.py < $(srcdir)/Include/typeslots.h > Objects/typeslots.inc
############################################################################
# Header files
PYTHON_HEADERS= \
$(srcdir)/Include/Python.h \
$(srcdir)/Include/abstract.h \
$(srcdir)/Include/accu.h \
$(srcdir)/Include/asdl.h \
$(srcdir)/Include/ast.h \
$(srcdir)/Include/bltinmodule.h \
$(srcdir)/Include/bitset.h \
$(srcdir)/Include/boolobject.h \
$(srcdir)/Include/bytes_methods.h \
$(srcdir)/Include/bytearrayobject.h \
$(srcdir)/Include/bytesobject.h \
$(srcdir)/Include/cellobject.h \
$(srcdir)/Include/ceval.h \
$(srcdir)/Include/classobject.h \
$(srcdir)/Include/code.h \
$(srcdir)/Include/codecs.h \
$(srcdir)/Include/compile.h \
$(srcdir)/Include/complexobject.h \
$(srcdir)/Include/descrobject.h \
$(srcdir)/Include/dictobject.h \
$(srcdir)/Include/dtoa.h \
$(srcdir)/Include/dynamic_annotations.h \
$(srcdir)/Include/enumobject.h \
$(srcdir)/Include/errcode.h \
$(srcdir)/Include/eval.h \
$(srcdir)/Include/fileobject.h \
$(srcdir)/Include/fileutils.h \
$(srcdir)/Include/floatobject.h \
$(srcdir)/Include/frameobject.h \
$(srcdir)/Include/funcobject.h \
$(srcdir)/Include/genobject.h \
$(srcdir)/Include/import.h \
$(srcdir)/Include/intrcheck.h \
$(srcdir)/Include/iterobject.h \
$(srcdir)/Include/listobject.h \
$(srcdir)/Include/longintrepr.h \
$(srcdir)/Include/longobject.h \
$(srcdir)/Include/marshal.h \
$(srcdir)/Include/memoryobject.h \
$(srcdir)/Include/metagrammar.h \
$(srcdir)/Include/methodobject.h \
$(srcdir)/Include/modsupport.h \
$(srcdir)/Include/moduleobject.h \
$(srcdir)/Include/namespaceobject.h \
$(srcdir)/Include/node.h \
$(srcdir)/Include/object.h \
$(srcdir)/Include/objimpl.h \
$(srcdir)/Include/opcode.h \
$(srcdir)/Include/osdefs.h \
$(srcdir)/Include/patchlevel.h \
$(srcdir)/Include/pgen.h \
$(srcdir)/Include/pgenheaders.h \
$(srcdir)/Include/pyarena.h \
$(srcdir)/Include/pyatomic.h \
$(srcdir)/Include/pycapsule.h \
$(srcdir)/Include/pyctype.h \
$(srcdir)/Include/pydebug.h \
$(srcdir)/Include/pyerrors.h \
$(srcdir)/Include/pyfpe.h \
$(srcdir)/Include/pymath.h \
$(srcdir)/Include/pygetopt.h \
$(srcdir)/Include/pymacro.h \
$(srcdir)/Include/pymem.h \
$(srcdir)/Include/pyport.h \
$(srcdir)/Include/pystate.h \
$(srcdir)/Include/pystrcmp.h \
$(srcdir)/Include/pystrtod.h \
$(srcdir)/Include/pythonrun.h \
$(srcdir)/Include/pythread.h \
$(srcdir)/Include/pytime.h \
$(srcdir)/Include/rangeobject.h \
$(srcdir)/Include/setobject.h \
$(srcdir)/Include/sliceobject.h \
$(srcdir)/Include/structmember.h \
$(srcdir)/Include/structseq.h \
$(srcdir)/Include/symtable.h \
$(srcdir)/Include/sysmodule.h \
$(srcdir)/Include/traceback.h \
$(srcdir)/Include/tupleobject.h \
$(srcdir)/Include/ucnhash.h \
$(srcdir)/Include/unicodeobject.h \
$(srcdir)/Include/warnings.h \
$(srcdir)/Include/weakrefobject.h \
pyconfig.h \
$(PARSER_HEADERS)
$(LIBRARY_OBJS) $(MODOBJS) Modules/python.o: $(PYTHON_HEADERS)
######################################################################
TESTOPTS= $(EXTRATESTOPTS)
TESTPYTHON= $(RUNSHARED) ./$(BUILDPYTHON) $(TESTPYTHONOPTS)
TESTRUNNER= $(TESTPYTHON) $(srcdir)/Tools/scripts/run_tests.py
TESTTIMEOUT= 3600
# Run a basic set of regression tests.
# This excludes some tests that are particularly resource-intensive.
test: all platform
$(TESTRUNNER) $(TESTOPTS)
# Run the full test suite twice - once without .pyc files, and once with.
# In the past, we've had problems where bugs in the marshalling or
# elsewhere caused bytecode read from .pyc files to behave differently
# than bytecode generated directly from a .py source file. Sometimes
# the bytecode read from a .pyc file had the bug, sometimes the directly
# generated bytecode. This is sometimes a very shy bug needing a lot of
# sample data.
testall: all platform
-find $(srcdir)/Lib -name '*.py[co]' -print | xargs rm -f
$(TESTPYTHON) -E $(srcdir)/Lib/compileall.py
-find $(srcdir)/Lib -name '*.py[co]' -print | xargs rm -f
-$(TESTRUNNER) -u all $(TESTOPTS)
$(TESTRUNNER) -u all $(TESTOPTS)
# Run the test suite for both architectures in a Universal build on OSX.
# Must be run on an Intel box.
testuniversal: all platform
if [ `arch` != 'i386' ];then \
echo "This can only be used on OSX/i386" ;\
exit 1 ;\
fi
$(TESTRUNNER) -u all $(TESTOPTS)
$(RUNSHARED) /usr/libexec/oah/translate \
./$(BUILDPYTHON) -E -m test -j 0 -u all $(TESTOPTS)
# Like testall, but with only one pass and without multiple processes.
# Run an optional script to include information about the build environment.
buildbottest: all platform
-@if which pybuildbot.identify >/dev/null 2>&1; then \
pybuildbot.identify "CC='$(CC)'" "CXX='$(CXX)'"; \
fi
$(TESTRUNNER) -j 1 -u all -W --timeout=$(TESTTIMEOUT) $(TESTOPTS)
QUICKTESTOPTS= $(TESTOPTS) -x test_subprocess test_io test_lib2to3 \
test_multibytecodec test_urllib2_localnet test_itertools \
test_multiprocessing test_mailbox test_socket test_poll \
test_select test_zipfile test_concurrent_futures
quicktest: all platform
$(TESTRUNNER) $(QUICKTESTOPTS)
install: altinstall bininstall maninstall
altinstall: @FRAMEWORKALTINSTALLFIRST@ altbininstall libinstall inclinstall libainstall \
sharedinstall oldsharedinstall altmaninstall @FRAMEWORKALTINSTALLLAST@
# Install shared libraries enabled by Setup
DESTDIRS= $(exec_prefix) $(LIBDIR) $(BINLIBDEST) $(DESTSHARED)
oldsharedinstall: $(DESTSHARED) $(SHAREDMODS)
@for i in X $(SHAREDMODS); do \
if test $$i != X; then \
echo $(INSTALL_SHARED) $$i $(DESTSHARED)/`basename $$i`; \
$(INSTALL_SHARED) $$i $(DESTDIR)$(DESTSHARED)/`basename $$i`; \
fi; \
done
$(DESTSHARED):
@for i in $(DESTDIRS); \
do \
if test ! -d $(DESTDIR)$$i; then \
echo "Creating directory $$i"; \
$(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \
else true; \
fi; \
done
# Install the interpreter with $(VERSION) affixed
# This goes into $(exec_prefix)
altbininstall: $(BUILDPYTHON)
@for i in $(BINDIR) $(LIBDIR); \
do \
if test ! -d $(DESTDIR)$$i; then \
echo "Creating directory $$i"; \
$(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \
else true; \
fi; \
done
$(INSTALL_PROGRAM) $(BUILDPYTHON) $(DESTDIR)$(BINDIR)/python$(LDVERSION)$(EXE)
-if test "$(VERSION)" != "$(LDVERSION)"; then \
if test -f $(DESTDIR)$(BINDIR)/python$(VERSION)$(EXE) -o -h $(DESTDIR)$(BINDIR)/python$(VERSION)$(EXE); \
then rm -f $(DESTDIR)$(BINDIR)/python$(VERSION)$(EXE); \
fi; \
(cd $(DESTDIR)$(BINDIR); $(LN) python$(LDVERSION)$(EXE) python$(VERSION)$(EXE)); \
fi
if test -f $(LDLIBRARY); then \
if test -n "$(DLLLIBRARY)" ; then \
$(INSTALL_SHARED) $(DLLLIBRARY) $(DESTDIR)$(BINDIR); \
else \
$(INSTALL_SHARED) $(LDLIBRARY) $(DESTDIR)$(LIBDIR)/$(INSTSONAME); \
if test $(LDLIBRARY) != $(INSTSONAME); then \
(cd $(DESTDIR)$(LIBDIR); $(LN) -sf $(INSTSONAME) $(LDLIBRARY)) \
fi \
fi; \
if test -n "$(PY3LIBRARY)"; then \
$(INSTALL_SHARED) $(PY3LIBRARY) $(DESTDIR)$(LIBDIR)/$(PY3LIBRARY); \
fi; \
else true; \
fi
bininstall: altbininstall
-if test -f $(DESTDIR)$(BINDIR)/python3$(EXE) -o -h $(DESTDIR)$(BINDIR)/python3$(EXE); \
then rm -f $(DESTDIR)$(BINDIR)/python3$(EXE); \
else true; \
fi
(cd $(DESTDIR)$(BINDIR); $(LN) -s python$(VERSION)$(EXE) python3$(EXE))
-if test "$(VERSION)" != "$(LDVERSION)"; then \
rm -f $(DESTDIR)$(BINDIR)/python$(VERSION)-config; \
(cd $(DESTDIR)$(BINDIR); $(LN) -s python$(LDVERSION)-config python$(VERSION)-config); \
rm -f $(DESTDIR)$(LIBPC)/python-$(LDVERSION).pc; \
(cd $(DESTDIR)$(LIBPC); $(LN) -s python-$(VERSION).pc python-$(LDVERSION).pc); \
fi
-rm -f $(DESTDIR)$(BINDIR)/python3-config
(cd $(DESTDIR)$(BINDIR); $(LN) -s python$(VERSION)-config python3-config)
-rm -f $(DESTDIR)$(LIBPC)/python3.pc
(cd $(DESTDIR)$(LIBPC); $(LN) -s python-$(VERSION).pc python3.pc)
-rm -f $(DESTDIR)$(BINDIR)/idle3
(cd $(DESTDIR)$(BINDIR); $(LN) -s idle$(VERSION) idle3)
-rm -f $(DESTDIR)$(BINDIR)/pydoc3
(cd $(DESTDIR)$(BINDIR); $(LN) -s pydoc$(VERSION) pydoc3)
-rm -f $(DESTDIR)$(BINDIR)/2to3
(cd $(DESTDIR)$(BINDIR); $(LN) -s 2to3-$(VERSION) 2to3)
-rm -f $(DESTDIR)$(BINDIR)/pyvenv
(cd $(DESTDIR)$(BINDIR); $(LN) -s pyvenv-$(VERSION) pyvenv)
# Install the versioned manual page
altmaninstall:
@for i in $(MANDIR) $(MANDIR)/man1; \
do \
if test ! -d $(DESTDIR)$$i; then \
echo "Creating directory $$i"; \
$(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \
else true; \
fi; \
done
$(INSTALL_DATA) $(srcdir)/Misc/python.man \
$(DESTDIR)$(MANDIR)/man1/python$(VERSION).1
# Install the unversioned manual page
maninstall: altmaninstall
-rm -f $(DESTDIR)$(MANDIR)/man1/python3.1
(cd $(DESTDIR)$(MANDIR)/man1; $(LN) -s python$(VERSION).1 python3.1)
# Install the library
PLATDIR= plat-$(MACHDEP)
EXTRAPLATDIR= @EXTRAPLATDIR@
MACHDEPS= $(PLATDIR) $(EXTRAPLATDIR)
XMLLIBSUBDIRS= xml xml/dom xml/etree xml/parsers xml/sax
LIBSUBDIRS= tkinter tkinter/test tkinter/test/test_tkinter \
tkinter/test/test_ttk site-packages test \
test/capath test/data \
test/cjkencodings test/decimaltestdata test/xmltestdata \
test/subprocessdata test/sndhdrdata \
test/tracedmodules test/encoded_modules \
test/namespace_pkgs \
test/namespace_pkgs/both_portions \
test/namespace_pkgs/both_portions/foo \
test/namespace_pkgs/not_a_namespace_pkg \
test/namespace_pkgs/not_a_namespace_pkg/foo \
test/namespace_pkgs/portion1 \
test/namespace_pkgs/portion1/foo \
test/namespace_pkgs/portion2 \
test/namespace_pkgs/portion2/foo \
test/namespace_pkgs/project1 \
test/namespace_pkgs/project1/parent \
test/namespace_pkgs/project1/parent/child \
test/namespace_pkgs/project2 \
test/namespace_pkgs/project2/parent \
test/namespace_pkgs/project2/parent/child \
test/namespace_pkgs/project3 \
test/namespace_pkgs/project3/parent \
test/namespace_pkgs/project3/parent/child \
test/namespace_pkgs/module_and_namespace_package \
test/namespace_pkgs/module_and_namespace_package/a_test \
collections concurrent concurrent/futures encodings \
email email/mime test/test_email test/test_email/data \
html json test/json_tests http dbm xmlrpc \
sqlite3 sqlite3/test \
logging csv wsgiref urllib \
lib2to3 lib2to3/fixes lib2to3/pgen2 lib2to3/tests \
lib2to3/tests/data lib2to3/tests/data/fixers \
lib2to3/tests/data/fixers/myfixes \
ctypes ctypes/test ctypes/macholib idlelib idlelib/Icons \
distutils distutils/command distutils/tests $(XMLLIBSUBDIRS) \
importlib test/test_importlib test/test_importlib/builtin \
test/test_importlib/extension test/test_importlib/frozen \
test/test_importlib/import_ test/test_importlib/source \
turtledemo \
multiprocessing multiprocessing/dummy \
unittest unittest/test unittest/test/testmock \
venv venv/scripts venv/scripts/posix \
curses pydoc_data $(MACHDEPS)
libinstall: build_all $(srcdir)/Lib/$(PLATDIR) $(srcdir)/Modules/xxmodule.c
@for i in $(SCRIPTDIR) $(LIBDEST); \
do \
if test ! -d $(DESTDIR)$$i; then \
echo "Creating directory $$i"; \
$(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \
else true; \
fi; \
done
@for d in $(LIBSUBDIRS); \
do \
a=$(srcdir)/Lib/$$d; \
if test ! -d $$a; then continue; else true; fi; \
b=$(LIBDEST)/$$d; \
if test ! -d $(DESTDIR)$$b; then \
echo "Creating directory $$b"; \
$(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$b; \
else true; \
fi; \
done
@for i in $(srcdir)/Lib/*.py `cat pybuilddir.txt`/_sysconfigdata.py; \
do \
if test -x $$i; then \
$(INSTALL_SCRIPT) $$i $(DESTDIR)$(LIBDEST); \
echo $(INSTALL_SCRIPT) $$i $(LIBDEST); \
else \
$(INSTALL_DATA) $$i $(DESTDIR)$(LIBDEST); \
echo $(INSTALL_DATA) $$i $(LIBDEST); \
fi; \
done
@for d in $(LIBSUBDIRS); \
do \
a=$(srcdir)/Lib/$$d; \
if test ! -d $$a; then continue; else true; fi; \
if test `ls $$a | wc -l` -lt 1; then continue; fi; \
b=$(LIBDEST)/$$d; \
for i in $$a/*; \
do \
case $$i in \
*CVS) ;; \
*.py[co]) ;; \
*.orig) ;; \
*~) ;; \
*) \
if test -d $$i; then continue; fi; \
if test -x $$i; then \
echo $(INSTALL_SCRIPT) $$i $$b; \
$(INSTALL_SCRIPT) $$i $(DESTDIR)$$b; \
else \
echo $(INSTALL_DATA) $$i $$b; \
$(INSTALL_DATA) $$i $(DESTDIR)$$b; \
fi;; \
esac; \
done; \
done
$(INSTALL_DATA) $(srcdir)/LICENSE $(DESTDIR)$(LIBDEST)/LICENSE.txt
if test -d $(DESTDIR)$(LIBDEST)/distutils/tests; then \
$(INSTALL_DATA) $(srcdir)/Modules/xxmodule.c \
$(DESTDIR)$(LIBDEST)/distutils/tests ; \
fi
-PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \
$(PYTHON_FOR_BUILD) -Wi $(DESTDIR)$(LIBDEST)/compileall.py \
-d $(LIBDEST) -f \
-x 'bad_coding|badsyntax|site-packages|lib2to3/tests/data' \
$(DESTDIR)$(LIBDEST)
-PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \
$(PYTHON_FOR_BUILD) -Wi -O $(DESTDIR)$(LIBDEST)/compileall.py \
-d $(LIBDEST) -f \
-x 'bad_coding|badsyntax|site-packages|lib2to3/tests/data' \
$(DESTDIR)$(LIBDEST)
-PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \
$(PYTHON_FOR_BUILD) -Wi $(DESTDIR)$(LIBDEST)/compileall.py \
-d $(LIBDEST)/site-packages -f \
-x badsyntax $(DESTDIR)$(LIBDEST)/site-packages
-PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \
$(PYTHON_FOR_BUILD) -Wi -O $(DESTDIR)$(LIBDEST)/compileall.py \
-d $(LIBDEST)/site-packages -f \
-x badsyntax $(DESTDIR)$(LIBDEST)/site-packages
-PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \
$(PYTHON_FOR_BUILD) -m lib2to3.pgen2.driver $(DESTDIR)$(LIBDEST)/lib2to3/Grammar.txt
-PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \
$(PYTHON_FOR_BUILD) -m lib2to3.pgen2.driver $(DESTDIR)$(LIBDEST)/lib2to3/PatternGrammar.txt
# Create the PLATDIR source directory, if one wasn't distributed..
$(srcdir)/Lib/$(PLATDIR):
mkdir $(srcdir)/Lib/$(PLATDIR)
cp $(srcdir)/Lib/plat-generic/regen $(srcdir)/Lib/$(PLATDIR)/regen
export PATH; PATH="`pwd`:$$PATH"; \
export PYTHONPATH; PYTHONPATH="`pwd`/Lib"; \
export DYLD_FRAMEWORK_PATH; DYLD_FRAMEWORK_PATH="`pwd`"; \
export EXE; EXE="$(BUILDEXE)"; \
if [ -n "$(MULTIARCH)" ]; then export MULTIARCH; MULTIARCH=$(MULTIARCH); fi; \
export PYTHON_FOR_BUILD; \
if [ "$(BUILD_GNU_TYPE)" = "$(HOST_GNU_TYPE)" ]; then \
PYTHON_FOR_BUILD="$(BUILDPYTHON)"; \
else \
PYTHON_FOR_BUILD="$(PYTHON_FOR_BUILD)"; \
fi; \
cd $(srcdir)/Lib/$(PLATDIR); $(RUNSHARED) ./regen
python-config: $(srcdir)/Misc/python-config.in Misc/python-config.sh
# Substitution happens here, as the completely-expanded BINDIR
# is not available in configure
sed -e "s,@EXENAME@,$(BINDIR)/python$(LDVERSION)$(EXE)," < $(srcdir)/Misc/python-config.in >python-config.py
# Replace makefile compat. variable references with shell script compat. ones; $(VAR) -> ${VAR}
sed -e 's,\$$(\([A-Za-z0-9_]*\)),\$$\{\1\},g' < Misc/python-config.sh >python-config
# Install the include files
INCLDIRSTOMAKE=$(INCLUDEDIR) $(CONFINCLUDEDIR) $(INCLUDEPY) $(CONFINCLUDEPY)
inclinstall:
@for i in $(INCLDIRSTOMAKE); \
do \
if test ! -d $(DESTDIR)$$i; then \
echo "Creating directory $$i"; \
$(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \
else true; \
fi; \
done
@for i in $(srcdir)/Include/*.h; \
do \
echo $(INSTALL_DATA) $$i $(INCLUDEPY); \
$(INSTALL_DATA) $$i $(DESTDIR)$(INCLUDEPY); \
done
$(INSTALL_DATA) pyconfig.h $(DESTDIR)$(CONFINCLUDEPY)/pyconfig.h
# Install the library and miscellaneous stuff needed for extending/embedding
# This goes into $(exec_prefix)
LIBPL= $(LIBDEST)/config-$(LDVERSION)
# pkgconfig directory
LIBPC= $(LIBDIR)/pkgconfig
libainstall: all python-config
@for i in $(LIBDIR) $(LIBPL) $(LIBPC); \
do \
if test ! -d $(DESTDIR)$$i; then \
echo "Creating directory $$i"; \
$(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \
else true; \
fi; \
done
@if test -d $(LIBRARY); then :; else \
if test "$(PYTHONFRAMEWORKDIR)" = no-framework; then \
if test "$(SO)" = .dll; then \
$(INSTALL_DATA) $(LDLIBRARY) $(DESTDIR)$(LIBPL) ; \
else \
$(INSTALL_DATA) $(LIBRARY) $(DESTDIR)$(LIBPL)/$(LIBRARY) ; \
$(RANLIB) $(DESTDIR)$(LIBPL)/$(LIBRARY) ; \
fi; \
else \
echo Skip install of $(LIBRARY) - use make frameworkinstall; \
fi; \
fi
$(INSTALL_DATA) Modules/config.c $(DESTDIR)$(LIBPL)/config.c
$(INSTALL_DATA) Modules/python.o $(DESTDIR)$(LIBPL)/python.o
$(INSTALL_DATA) $(srcdir)/Modules/config.c.in $(DESTDIR)$(LIBPL)/config.c.in
$(INSTALL_DATA) Makefile $(DESTDIR)$(LIBPL)/Makefile
$(INSTALL_DATA) Modules/Setup $(DESTDIR)$(LIBPL)/Setup
$(INSTALL_DATA) Modules/Setup.local $(DESTDIR)$(LIBPL)/Setup.local
$(INSTALL_DATA) Modules/Setup.config $(DESTDIR)$(LIBPL)/Setup.config
$(INSTALL_DATA) Misc/python.pc $(DESTDIR)$(LIBPC)/python-$(VERSION).pc
$(INSTALL_SCRIPT) $(srcdir)/Modules/makesetup $(DESTDIR)$(LIBPL)/makesetup
$(INSTALL_SCRIPT) $(srcdir)/install-sh $(DESTDIR)$(LIBPL)/install-sh
$(INSTALL_SCRIPT) python-config.py $(DESTDIR)$(LIBPL)/python-config.py
$(INSTALL_SCRIPT) python-config $(DESTDIR)$(BINDIR)/python$(LDVERSION)-config
@if [ -s Modules/python.exp -a \
"`echo $(MACHDEP) | sed 's/^\(...\).*/\1/'`" = "aix" ]; then \
echo; echo "Installing support files for building shared extension modules on AIX:"; \
$(INSTALL_DATA) Modules/python.exp \
$(DESTDIR)$(LIBPL)/python.exp; \
echo; echo "$(LIBPL)/python.exp"; \
$(INSTALL_SCRIPT) $(srcdir)/Modules/makexp_aix \
$(DESTDIR)$(LIBPL)/makexp_aix; \
echo "$(LIBPL)/makexp_aix"; \
$(INSTALL_SCRIPT) $(srcdir)/Modules/ld_so_aix \
$(DESTDIR)$(LIBPL)/ld_so_aix; \
echo "$(LIBPL)/ld_so_aix"; \
echo; echo "See Misc/AIX-NOTES for details."; \
else true; \
fi
# Install the dynamically loadable modules
# This goes into $(exec_prefix)
sharedinstall: sharedmods
$(RUNSHARED) $(PYTHON_FOR_BUILD) $(srcdir)/setup.py install \
--prefix=$(prefix) \
--install-scripts=$(BINDIR) \
--install-platlib=$(DESTSHARED) \
--root=$(DESTDIR)/
-rm $(DESTDIR)$(DESTSHARED)/_sysconfigdata.py
-rm -r $(DESTDIR)$(DESTSHARED)/__pycache__
# Here are a couple of targets for MacOSX again, to install a full
# framework-based Python. frameworkinstall installs everything, the
# subtargets install specific parts. Much of the actual work is offloaded to
# the Makefile in Mac
#
#
# This target is here for backward compatiblity, previous versions of Python
# hadn't integrated framework installation in the normal install process.
frameworkinstall: install
# On install, we re-make the framework
# structure in the install location, /Library/Frameworks/ or the argument to
# --enable-framework. If --enable-framework has been specified then we have
# automatically set prefix to the location deep down in the framework, so we
# only have to cater for the structural bits of the framework.
frameworkinstallframework: frameworkinstallstructure install frameworkinstallmaclib
frameworkinstallstructure: $(LDLIBRARY)
@if test "$(PYTHONFRAMEWORKDIR)" = no-framework; then \
echo Not configured with --enable-framework; \
exit 1; \
else true; \
fi
@for i in $(prefix)/Resources/English.lproj $(prefix)/lib; do\
if test ! -d $(DESTDIR)$$i; then \
echo "Creating directory $(DESTDIR)$$i"; \
$(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \
else true; \
fi; \
done
$(LN) -fsn include/python$(LDVERSION) $(DESTDIR)$(prefix)/Headers
sed 's/%VERSION%/'"`$(RUNSHARED) ./$(BUILDPYTHON) -c 'import platform; print(platform.python_version())'`"'/g' < $(RESSRCDIR)/Info.plist > $(DESTDIR)$(prefix)/Resources/Info.plist
$(LN) -fsn $(VERSION) $(DESTDIR)$(PYTHONFRAMEWORKINSTALLDIR)/Versions/Current
$(LN) -fsn Versions/Current/$(PYTHONFRAMEWORK) $(DESTDIR)$(PYTHONFRAMEWORKINSTALLDIR)/$(PYTHONFRAMEWORK)
$(LN) -fsn Versions/Current/Headers $(DESTDIR)$(PYTHONFRAMEWORKINSTALLDIR)/Headers
$(LN) -fsn Versions/Current/Resources $(DESTDIR)$(PYTHONFRAMEWORKINSTALLDIR)/Resources
$(INSTALL_SHARED) $(LDLIBRARY) $(DESTDIR)$(PYTHONFRAMEWORKPREFIX)/$(LDLIBRARY)
# This installs Mac/Lib into the framework
# Install a number of symlinks to keep software that expects a normal unix
# install (which includes python-config) happy.
frameworkinstallmaclib:
ln -fs "../../../$(PYTHONFRAMEWORK)" "$(DESTDIR)$(prefix)/lib/python$(VERSION)/config-$(LDVERSION)/libpython$(LDVERSION).a"
ln -fs "../../../$(PYTHONFRAMEWORK)" "$(DESTDIR)$(prefix)/lib/python$(VERSION)/config-$(LDVERSION)/libpython$(LDVERSION).dylib"
ln -fs "../../../$(PYTHONFRAMEWORK)" "$(DESTDIR)$(prefix)/lib/python$(VERSION)/config-$(LDVERSION)/libpython$(VERSION).a"
ln -fs "../../../$(PYTHONFRAMEWORK)" "$(DESTDIR)$(prefix)/lib/python$(VERSION)/config-$(LDVERSION)/libpython$(VERSION).dylib"
ln -fs "../$(PYTHONFRAMEWORK)" "$(DESTDIR)$(prefix)/lib/libpython$(LDVERSION).dylib"
ln -fs "../$(PYTHONFRAMEWORK)" "$(DESTDIR)$(prefix)/lib/libpython$(VERSION).dylib"
# This installs the IDE, the Launcher and other apps into /Applications
frameworkinstallapps:
cd Mac && $(MAKE) installapps DESTDIR="$(DESTDIR)"
# This install the unix python and pythonw tools in /usr/local/bin
frameworkinstallunixtools:
cd Mac && $(MAKE) installunixtools DESTDIR="$(DESTDIR)"
frameworkaltinstallunixtools:
cd Mac && $(MAKE) altinstallunixtools DESTDIR="$(DESTDIR)"
# This installs the Tools into the applications directory.
# It is not part of a normal frameworkinstall
frameworkinstallextras:
cd Mac && $(MAKE) installextras DESTDIR="$(DESTDIR)"
# This installs a few of the useful scripts in Tools/scripts
scriptsinstall:
SRCDIR=$(srcdir) $(RUNSHARED) \
$(PYTHON_FOR_BUILD) $(srcdir)/Tools/scripts/setup.py install \
--prefix=$(prefix) \
--install-scripts=$(BINDIR) \
--root=$(DESTDIR)/
# Build the toplevel Makefile
Makefile.pre: $(srcdir)/Makefile.pre.in config.status
CONFIG_FILES=Makefile.pre CONFIG_HEADERS= $(SHELL) config.status
$(MAKE) -f Makefile.pre Makefile
# Run the configure script.
config.status: $(srcdir)/configure
$(SHELL) $(srcdir)/configure $(CONFIG_ARGS)
.PRECIOUS: config.status $(BUILDPYTHON) Makefile Makefile.pre
# Some make's put the object file in the current directory
.c.o:
$(CC) -c $(PY_CORE_CFLAGS) -o $@ $<
# Run reindent on the library
reindent:
./$(BUILDPYTHON) $(srcdir)/Tools/scripts/reindent.py -r $(srcdir)/Lib
# Rerun configure with the same options as it was run last time,
# provided the config.status script exists
recheck:
$(SHELL) config.status --recheck
$(SHELL) config.status
# Rebuild the configure script from configure.ac; also rebuild pyconfig.h.in
autoconf:
(cd $(srcdir); autoconf -Wall)
(cd $(srcdir); autoheader -Wall)
# Create a tags file for vi
tags::
cd $(srcdir); \
ctags -w -t Include/*.h; \
for i in $(SRCDIRS); do ctags -w -t -a $$i/*.[ch]; \
done; \
sort -o tags tags
# Create a tags file for GNU Emacs
TAGS::
cd $(srcdir); \
etags Include/*.h; \
for i in $(SRCDIRS); do etags -a $$i/*.[ch]; done
# Touch generated files
touch:
hg --config extensions.touch=Tools/hg/hgtouch.py touch -v
# Sanitation targets -- clean leaves libraries, executables and tags
# files, which clobber removes as well
pycremoval:
-find $(srcdir) -depth -name '__pycache__' -exec rm -rf {} ';'
-find $(srcdir) -name '*.py[co]' -exec rm -f {} ';'
rmtestturds:
-rm -f *BAD *GOOD *SKIPPED
-rm -rf OUT
-rm -f *.TXT
-rm -f *.txt
-rm -f gb-18030-2000.xml
docclean:
-rm -rf Doc/build
-rm -rf Doc/tools/sphinx Doc/tools/pygments Doc/tools/docutils
clean: pycremoval
find . -name '*.[oa]' -exec rm -f {} ';'
find . -name '*.s[ol]' -exec rm -f {} ';'
find . -name '*.so.[0-9]*.[0-9]*' -exec rm -f {} ';'
find build -name 'fficonfig.h' -exec rm -f {} ';' || true
find build -name '*.py' -exec rm -f {} ';' || true
find build -name '*.py[co]' -exec rm -f {} ';' || true
-rm -f pybuilddir.txt
-rm -f Lib/lib2to3/*Grammar*.pickle
-rm -f Modules/_testembed Modules/_freeze_importlib
profile-removal:
find . -name '*.gc??' -exec rm -f {} ';'
clobber: clean profile-removal
-rm -f $(BUILDPYTHON) $(PGEN) $(LIBRARY) $(LDLIBRARY) $(DLLLIBRARY) \
tags TAGS \
config.cache config.log pyconfig.h Modules/config.c
-rm -rf build platform
-rm -rf $(PYTHONFRAMEWORKDIR)
-rm -f python-config.py python-config
# Make things extra clean, before making a distribution:
# remove all generated files, even Makefile[.pre]
# Keep configure and Python-ast.[ch], it's possible they can't be generated
distclean: clobber
for file in Lib/test/data/* ; do \
if test "$$file" != "Lib/test/data/README"; then rm "$$file"; fi; \
done
-rm -f core Makefile Makefile.pre config.status \
Modules/Setup Modules/Setup.local Modules/Setup.config \
Modules/ld_so_aix Modules/python.exp Misc/python.pc
-rm -f python*-gdb.py
find $(srcdir) '(' -name '*.fdc' -o -name '*~' \
-o -name '[@,#]*' -o -name '*.old' \
-o -name '*.orig' -o -name '*.rej' \
-o -name '*.bak' ')' \
-exec rm -f {} ';'
# Check for smelly exported symbols (not starting with Py/_Py)
smelly: all
nm -p $(LIBRARY) | \
sed -n "/ [TDB] /s/.* //p" | grep -v "^_*Py" | sort -u; \
# Find files with funny names
funny:
find $(SUBDIRS) $(SUBDIRSTOO) \
-type d \
-o -name '*.[chs]' \
-o -name '*.py' \
-o -name '*.pyw' \
-o -name '*.dat' \
-o -name '*.el' \
-o -name '*.fd' \
-o -name '*.in' \
-o -name '*.gif' \
-o -name '*.txt' \
-o -name '*.xml' \
-o -name '*.xbm' \
-o -name '*.xpm' \
-o -name '*.uue' \
-o -name '*.decTest' \
-o -name '*.tmCommand' \
-o -name '*.tmSnippet' \
-o -name 'Setup' \
-o -name 'Setup.*' \
-o -name regen \
-o -name README \
-o -name NEWS \
-o -name HISTORY \
-o -name Makefile \
-o -name ChangeLog \
-o -name .hgignore \
-o -name .bzrignore \
-o -name MANIFEST \
-o -print
# Perform some verification checks on any modified files.
patchcheck:
$(RUNSHARED) ./$(BUILDPYTHON) $(srcdir)/Tools/scripts/patchcheck.py
# Dependencies
Python/thread.o: @THREADHEADERS@
# Declare targets that aren't real files
.PHONY: all build_all sharedmods oldsharedmods test quicktest
.PHONY: install altinstall oldsharedinstall bininstall altbininstall
.PHONY: maninstall libinstall inclinstall libainstall sharedinstall
.PHONY: frameworkinstall frameworkinstallframework frameworkinstallstructure
.PHONY: frameworkinstallmaclib frameworkinstallapps frameworkinstallunixtools
.PHONY: frameworkaltinstallunixtools recheck autoconf clean clobber distclean
.PHONY: smelly funny patchcheck touch altmaninstall
.PHONY: gdbhooks
# IF YOU PUT ANYTHING HERE IT WILL GO AWAY
# Local Variables:
# mode: makefile
# End: