Merged revisions 76566 via svnmerge from
svn+ssh://pythondev@svn.python.org/python/branches/py3k
................
r76566 | mark.dickinson | 2009-11-28 12:48:43 +0000 (Sat, 28 Nov 2009) | 18 lines
Merged revisions 76432,76558 via svnmerge from
svn+ssh://pythondev@svn.python.org/python/trunk
........
r76432 | mark.dickinson | 2009-11-20 19:30:22 +0000 (Fri, 20 Nov 2009) | 5 lines
Issue #7272: Add configure test to detect whether sem_open works
properly, and use this to skip test_multiprocessing on platforms
where sem_open raises a signal. This should fix some FreeBSD buildbot
failures for test_multiprocessing.
........
r76558 | mark.dickinson | 2009-11-28 10:44:20 +0000 (Sat, 28 Nov 2009) | 4 lines
Issue #7272, continued: don't re-use existing HAVE_BROKEN_POSIX_SEMAPHORES
to indicate that semaphores aren't available; define a new variable
POSIX_SEMAPHORES_NOT_ENABLED instead.
........
................
diff --git a/configure b/configure
index 5079e84..a07d519 100755
--- a/configure
+++ b/configure
@@ -1,5 +1,5 @@
#! /bin/sh
-# From configure.in Revision: 75727 .
+# From configure.in Revision: 76406 .
# Guess values for system-dependent variables and create Makefiles.
# Generated by GNU Autoconf 2.61 for python 3.1.
#
@@ -3802,7 +3802,7 @@
{ echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
-rm -f -r conftest*
+rm -f conftest*
@@ -5350,7 +5350,7 @@
else
ac_cv_header_stdc=no
fi
-rm -f -r conftest*
+rm -f conftest*
fi
@@ -5371,7 +5371,7 @@
else
ac_cv_header_stdc=no
fi
-rm -f -r conftest*
+rm -f conftest*
fi
@@ -6469,7 +6469,7 @@
fi
-rm -f -r conftest*
+rm -f conftest*
{ echo "$as_me:$LINENO: result: $was_it_defined" >&5
echo "${ECHO_T}$was_it_defined" >&6; }
@@ -6999,7 +6999,7 @@
else
ac_cv_type_uid_t=no
fi
-rm -f -r conftest*
+rm -f conftest*
fi
{ echo "$as_me:$LINENO: result: $ac_cv_type_uid_t" >&5
@@ -14409,7 +14409,7 @@
else
unistd_defines_pthreads=no
fi
-rm -f -r conftest*
+rm -f conftest*
{ echo "$as_me:$LINENO: result: $unistd_defines_pthreads" >&5
echo "${ECHO_T}$unistd_defines_pthreads" >&6; }
@@ -15877,7 +15877,7 @@
$EGREP "yes" >/dev/null 2>&1; then
ipv6type=$i
fi
-rm -f -r conftest*
+rm -f conftest*
;;
kame)
@@ -15900,7 +15900,7 @@
ipv6libdir=/usr/local/v6/lib
ipv6trylibc=yes
fi
-rm -f -r conftest*
+rm -f conftest*
;;
linux-glibc)
@@ -15921,7 +15921,7 @@
ipv6type=$i;
ipv6trylibc=yes
fi
-rm -f -r conftest*
+rm -f conftest*
;;
linux-inet6)
@@ -15959,7 +15959,7 @@
ipv6lib=inet6;
ipv6libdir=/usr/local/v6/lib
fi
-rm -f -r conftest*
+rm -f conftest*
;;
v6d)
@@ -15982,7 +15982,7 @@
ipv6libdir=/usr/local/v6/lib;
BASECFLAGS="-I/usr/local/v6/include $BASECFLAGS"
fi
-rm -f -r conftest*
+rm -f conftest*
;;
zeta)
@@ -16004,7 +16004,7 @@
ipv6lib=inet6;
ipv6libdir=/usr/local/v6/lib
fi
-rm -f -r conftest*
+rm -f conftest*
;;
esac
@@ -22531,6 +22531,90 @@
LIBS=$LIBS_SAVE
+# For multiprocessing module, check that sem_open
+# actually works. For FreeBSD versions <= 7.2,
+# the kernel module that provides POSIX semaphores
+# isn't loaded by default, so an attempt to call
+# sem_open results in a 'Signal 12' error.
+{ echo "$as_me:$LINENO: checking whether POSIX semaphores are enabled" >&5
+echo $ECHO_N "checking whether POSIX semaphores are enabled... $ECHO_C" >&6; }
+if test "${ac_cv_posix_semaphores_enabled+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_posix_semaphores_enabled=yes
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+#include <unistd.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <semaphore.h>
+#include <sys/stat.h>
+
+int main(void) {
+ sem_t *a = sem_open("/autoconf", O_CREAT, S_IRUSR|S_IWUSR, 0);
+ if (a == SEM_FAILED) {
+ perror("sem_open");
+ return 1;
+ }
+ sem_close(a);
+ return 0;
+}
+
+_ACEOF
+rm -f conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_posix_semaphores_enabled=yes
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_posix_semaphores_enabled=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+
+
+
+fi
+
+{ echo "$as_me:$LINENO: result: $ac_cv_posix_semaphores_enabled" >&5
+echo "${ECHO_T}$ac_cv_posix_semaphores_enabled" >&6; }
+if test $ac_cv_posix_semaphores_enabled = no
+then
+
+cat >>confdefs.h <<\_ACEOF
+#define POSIX_SEMAPHORES_NOT_ENABLED 1
+_ACEOF
+
+fi
+
# Multiprocessing check for broken sem_getvalue
{ echo "$as_me:$LINENO: checking for broken sem_getvalue" >&5
echo $ECHO_N "checking for broken sem_getvalue... $ECHO_C" >&6; }
@@ -23989,7 +24073,7 @@
_ACEOF
fi
-rm -f -r conftest*
+rm -f conftest*
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
@@ -24008,7 +24092,7 @@
_ACEOF
fi
-rm -f -r conftest*
+rm -f conftest*
fi
@@ -24278,7 +24362,7 @@
_ACEOF
fi
-rm -f -r conftest*
+rm -f conftest*
fi